diff options
Diffstat (limited to 'configure.in')
| -rw-r--r-- | configure.in | 836 |
1 files changed, 433 insertions, 403 deletions
diff --git a/configure.in b/configure.in index 6b8154a..485d8f3 100644 --- a/configure.in +++ b/configure.in @@ -747,97 +747,448 @@ case "${noconfigdirs}" in *target-newlib*) noconfigdirs="$noconfigdirs target-libgloss" ;; esac +# Work in distributions that contain no compiler tools, like Autoconf. +tentative_cc="" +host_makefile_frag=/dev/null +if test -d ${srcdir}/config ; then +case "${host}" in + m68k-hp-hpux*) + # Avoid "too much defining" errors from HPUX compiler. + tentative_cc="cc -Wp,-H256000" + # If "ar" in $PATH is GNU ar, the symbol table may need rebuilding. + # If it's HP/UX ar, this should be harmless. + RANLIB="ar ts" + ;; + m68k-apollo-sysv*) + tentative_cc="cc -A ansi -A runtype,any -A systype,any -U__STDC__ -DUSG" + ;; + m68k-apollo-bsd*) + #None of the Apollo compilers can compile gas or binutils. The preprocessor + # chokes on bfd, the compiler won't let you assign integers to enums, and + # other problems. Defining CC to gcc is a questionable way to say "don't use + # the apollo compiler" (the preferred version of GCC could be called cc, + # or whatever), but I'm not sure leaving CC as cc is any better... + #CC=cc -A ansi -A runtype,any -A systype,any -U__STDC__ -DNO_STDARG + # Used to have BISON=yacc. + tentative_cc=gcc + ;; + m88k-dg-dgux*) + tentative_cc="gcc -Wall -ansi -D__using_DGUX" + ;; + m88k-harris-cxux*) + # Under CX/UX, we want to tell the compiler to use ANSI mode. + tentative_cc="cc -Xa" + host_makefile_frag="config/mh-cxux" + ;; + m88k-motorola-sysv*) + ;; + mips*-dec-ultrix*) + tentative_cc="cc -Wf,-XNg1000" + host_makefile_frag="config/mh-decstation" + ;; + mips*-nec-sysv4*) + # The C compiler on NEC MIPS SVR4 needs bigger tables. + tentative_cc="cc -ZXNd=5000 -ZXNg=1000" + host_makefile_frag="config/mh-necv4" + ;; + mips*-sgi-irix4*) + # Tell compiler to use K&R C. We can't compile under the SGI Ansi + # environment. Also bump switch table size so that cp-parse will + # compile. Bump string length limit so linker builds. + tentative_cc="cc -cckr -Wf,-XNg1500 -Wf,-XNk1000 -Wf,-XNh2000 -Wf,-XNl8192" + ;; + mips*-*-sysv4*) + host_makefile_frag="config/mh-sysv4" + ;; + mips*-*-sysv*) + # This is for a MIPS running RISC/os 4.52C. + + # This is needed for GDB, but needs to be in the top-level make because + # if a library is compiled with the bsd headers and gets linked with the + # sysv system libraries all hell can break loose (e.g. a jmp_buf might be + # a different size). + # ptrace(2) apparently has problems in the BSD environment. No workaround is + # known except to select the sysv environment. Could we use /proc instead? + # These "sysv environments" and "bsd environments" often end up being a pain. + # + # This is not part of CFLAGS because perhaps not all C compilers have this + # option. + tentative_cc="cc -systype sysv" + ;; + i370-ibm-opened*) + tentative_cc="c89" + ;; + i[[3456789]]86-*-sysv5*) + host_makefile_frag="config/mh-sysv5" + ;; + i[[3456789]]86-*-dgux*) + tentative_cc="gcc -Wall -ansi -D__using_DGUX" + host_makefile_frag="config/mh-dgux386" + ;; + i[[3456789]]86-ncr-sysv4.3*) + # The MetaWare compiler will generate a copyright message unless you + # turn it off by adding the -Hnocopyr flag. + tentative_cc="cc -Hnocopyr" + ;; + i[[3456789]]86-ncr-sysv4*) + # for an NCR 3000 (i486/SVR4) system. + # The NCR 3000 ships with a MetaWare compiler installed as /bin/cc. + # This compiler not only emits obnoxious copyright messages every time + # you run it, but it chokes and dies on a whole bunch of GNU source + # files. Default to using the AT&T compiler installed in /usr/ccs/ATT/cc. + tentative_cc="/usr/ccs/ATT/cc" + host_makefile_frag="config/mh-ncr3000" + ;; + i[[3456789]]86-*-sco3.2v5*) + ;; + i[[3456789]]86-*-sco*) + # The native C compiler botches some simple uses of const. Unfortunately, + # it doesn't defined anything like "__sco__" for us to test for in ansidecl.h. + tentative_cc="cc -Dconst=" + host_makefile_frag="config/mh-sco" + ;; + i[[3456789]]86-*-udk*) + host_makefile_frag="config/mh-sysv5" + ;; + i[[3456789]]86-*-solaris2*) + host_makefile_frag="config/mh-sysv4" + ;; + i[[3456789]]86-*-msdosdjgpp*) + host_makefile_frag="config/mh-djgpp" + ;; + *-cygwin*) + host_makefile_frag="config/mh-cygwin" + ;; + *-mingw32*) + host_makefile_frag="config/mh-mingw32" + ;; + *-interix*) + host_makefile_frag="config/mh-interix" + ;; + vax-*-ultrix2*) + # The old BSD pcc isn't up to compiling parts of gdb so use gcc + tentative_cc=gcc + ;; + *-*-solaris2*) + host_makefile_frag="config/mh-solaris" + ;; + m68k-sun-sunos*) + # Sun's C compiler needs the -J flag to be able to compile cp-parse.c + # without overflowing the jump tables (-J says to use a 32 bit table) + tentative_cc="cc -J" + ;; + *-hp-hpux*) + tentative_cc="cc -Wp,-H256000" + ;; + *-*-hiux*) + tentative_cc="cc -Wp,-H256000" + ;; + rs6000-*-lynxos*) + # /bin/cc is less than useful for our purposes. Always use GCC + tentative_cc="/usr/cygnus/progressive/bin/gcc" + host_makefile_frag="config/mh-lynxrs6k" + ;; + *-*-lynxos*) + # /bin/cc is less than useful for our purposes. Always use GCC + tentative_cc="/bin/gcc" + ;; + *-*-sysv4*) + host_makefile_frag="config/mh-sysv4" + ;; +esac +fi + +# If we aren't going to be using gcc, see if we can extract a definition +# of CC from the fragment. +# Actually, use the 'pre-extracted' version above. +if test -z "${CC}" && test "${build}" = "${host}" ; then + IFS="${IFS= }"; save_ifs="$IFS"; IFS="${IFS}:" + found= + for dir in $PATH; do + test -z "$dir" && dir=. + if test -f $dir/gcc; then + found=yes + break + fi + done + IFS="$save_ifs" + if test -z "${found}" && test -n "${tentative_cc}" ; then + CC=$tentative_cc + fi +fi + +if test "${build}" != "${host}" ; then + # If we are doing a Canadian Cross, in which the host and build systems + # are not the same, we set reasonable default values for the tools. + + BISON=${BISON-bison} + CC=${CC-${host_alias}-gcc} + CFLAGS=${CFLAGS-"-g -O2"} + CXX=${CXX-${host_alias}-c++} + CXXFLAGS=${CXXFLAGS-"-g -O2"} + CC_FOR_BUILD=${CC_FOR_BUILD-gcc} + CC_FOR_TARGET=${CC_FOR_TARGET-${target_alias}-gcc} + CXX_FOR_TARGET=${CXX_FOR_TARGET-${target_alias}-c++} + GCJ_FOR_TARGET=${GCJ_FOR_TARGET-${target_alias}-gcj} + GCC_FOR_TARGET=${GCC_FOR_TARGET-${CC_FOR_TARGET-${target_alias}-gcc}} + BUILD_PREFIX=${build_alias}- + BUILD_PREFIX_1=${build_alias}- + MAKEINFO=${MAKEINFO-makeinfo} + + if test -z "${YACC}" ; then + IFS="${IFS= }"; save_ifs="$IFS"; IFS="${IFS}:" + for dir in $PATH; do + test -z "$dir" && dir=. + if test -f $dir/bison; then + YACC="bison -y" + break + fi + if test -f $dir/byacc; then + YACC=byacc + break + fi + if test -f $dir/yacc; then + YACC=yacc + break + fi + done + IFS="$save_ifs" + if test -z "${YACC}" ; then + YACC="bison -y" + fi + fi + + if test -z "${LEX}" ; then + IFS="${IFS= }"; save_ifs="$IFS"; IFS="${IFS}:" + for dir in $PATH; do + test -z "$dir" && dir=. + if test -f $dir/flex; then + LEX=flex + break + fi + if test -f $dir/lex; then + LEX=lex + break + fi + done + IFS="$save_ifs" + LEX=${LEX-flex} + fi + +else + # Set reasonable default values for some tools even if not Canadian. + # Of course, these are different reasonable default values, originally + # specified directly in the Makefile. + # We don't export, so that autoconf can do its job. + # Note that all these settings are above the fragment inclusion point + # in Makefile.in, so can still be overridden by fragments. + # This is all going to change when we autoconfiscate... + + BISON="\$(USUAL_BISON)" + CC_FOR_BUILD="\$(CC)" + GCC_FOR_TARGET="\$(USUAL_GCC_FOR_TARGET)" + BUILD_PREFIX= + BUILD_PREFIX_1=loser- + MAKEINFO="\$(USUAL_MAKEINFO)" + LEX="\$(USUAL_LEX)" + YACC="\$(USUAL_YACC)" + + # If CC is still not set, try to get gcc. + cc_prog_is_gcc= + if test -z "${CC}" ; then + IFS="${IFS= }"; save_ifs="$IFS"; IFS="${IFS}:" + for dir in $PATH; do + test -z "$dir" && dir=. + if test -f $dir/gcc; then + CC="gcc" + cc_prog_is_gcc=yes + echo 'void f(){}' > conftest.c + if test -z "`${CC} -g -c conftest.c 2>&1`"; then + CFLAGS=${CFLAGS-"-g -O2"} + CXXFLAGS=${CXXFLAGS-"-g -O2"} + else + CFLAGS=${CFLAGS-"-O2"} + CXXFLAGS=${CXXFLAGS-"-O2"} + fi + rm -f conftest* + break + fi + done + IFS="$save_ifs" + CC=${CC-cc} + else + # Determine if we are using gcc. + cat > conftest.c <<EOF +#ifdef __GNUC__ + yes; +#endif +EOF + if ${CC} -E conftest.c | grep yes >/dev/null 2>&1; then + cc_prog_is_gcc=yes + fi + rm -f conftest.c + if test -z "${CFLAGS}"; then + # Here CC is set but CFLAGS is not. Use a quick hack to use -O2 if CC + # is set to a version of gcc. + if test "$cc_prog_is_gcc" = yes; then + echo 'void f(){}' > conftest.c + if test -z "`${CC} -g -c conftest.c 2>&1`"; then + CFLAGS=${CFLAGS-"-g -O2"} + CXXFLAGS=${CXXFLAGS-"-g -O2"} + else + CFLAGS=${CFLAGS-"-O2"} + CXXFLAGS=${CXXFLAGS-"-O2"} + fi + rm -f conftest* + fi + fi + fi + + # We must set the default linker to the linker used by gcc for the correct + # operation of libtool. If LD is not defined and we are using gcc, try to + # set the LD default to the ld used by gcc. + if test -z "$LD"; then + if test "$cc_prog_is_gcc" = yes; then + case $build in + *-*-mingw*) + gcc_prog_ld=`$CC -print-prog-name=ld 2>&1 | tr -d '\015'` ;; + *) + gcc_prog_ld=`$CC -print-prog-name=ld 2>&1` ;; + esac + case $gcc_prog_ld in + # Accept absolute paths. + [[\\/]* | [A-Za-z]:[\\/]*)] + LD="$gcc_prog_ld" ;; + esac + fi + fi + + CXX=${CXX-"c++"} + CFLAGS=${CFLAGS-"-g"} + CXXFLAGS=${CXXFLAGS-"-g -O2"} +fi + +ACX_PROG_GNAT + # Figure out what language subdirectories are present. # Look if the user specified --enable-languages="..."; if not, use # the environment variable $LANGUAGES if defined. $LANGUAGES might # go away some day. # NB: embedded tabs in this IF block -- do not untabify -if test x"${enable_languages+set}" != xset; then - if test x"${LANGUAGES+set}" = xset; then - enable_languages="${LANGUAGES}" - echo configure.in: warning: setting LANGUAGES is deprecated, use --enable-languages instead 1>&2 +if test -d ${srcdir}/gcc; then + if test x"${enable_languages+set}" != xset; then + if test x"${LANGUAGES+set}" = xset; then + enable_languages="${LANGUAGES}" + echo configure.in: warning: setting LANGUAGES is deprecated, use --enable-languages instead 1>&2 + else + enable_languages=all + fi else - enable_languages=all - fi -else - if test x"${enable_languages}" = x || - test x"${enable_languages}" = xyes; - then - echo configure.in: --enable-languages needs at least one language argument 1>&2 - exit 1 + if test x"${enable_languages}" = x || + test x"${enable_languages}" = xyes; + then + echo configure.in: --enable-languages needs at least one language argument 1>&2 + exit 1 + fi fi -fi -enable_languages=`echo "${enable_languages}" | sed -e 's/[[ ,]][[ ,]]*/,/g' -e 's/,$//'` - -# First scan to see if an enabled language requires some other language. -# We assume that a given config-lang.in will list all the language -# front ends it requires, even if some are required indirectly. -for lang_frag in ${srcdir}/gcc/*/config-lang.in .. ; do - case ${lang_frag} in - ..) ;; - # The odd quoting in the next line works around - # an apparent bug in bash 1.12 on linux. - ${srcdir}/gcc/[[*]]/config-lang.in) ;; - *) - # From the config-lang.in, get $language, $lang_requires - language= - lang_requires= - . ${lang_frag} - for other in ${lang_requires} ; do - case ,${enable_languages}, in - *,$other,*) ;; - *,all,*) ;; - *,$language,*) - echo " \`$other' language required by \`$language'; enabling" 1>&2 - enable_languages="${enable_languages},${other}" + enable_languages=`echo "${enable_languages}" | sed -e 's/[[ ,]][[ ,]]*/,/g' -e 's/,$//'` + + # First scan to see if an enabled language requires some other language. + # We assume that a given config-lang.in will list all the language + # front ends it requires, even if some are required indirectly. + for lang_frag in ${srcdir}/gcc/*/config-lang.in .. ; do + case ${lang_frag} in + ..) ;; + # The odd quoting in the next line works around + # an apparent bug in bash 1.12 on linux. + ${srcdir}/gcc/[[*]]/config-lang.in) ;; + *) + # From the config-lang.in, get $language, $lang_requires + language= + lang_requires= + . ${lang_frag} + for other in ${lang_requires} ; do + case ,${enable_languages}, in + *,$other,*) ;; + *,all,*) ;; + *,$language,*) + echo " \`$other' language required by \`$language'; enabling" 1>&2 + enable_languages="${enable_languages},${other}" + ;; + esac + done + ;; + esac + done + + new_enable_languages=c + missing_languages=`echo ",$enable_languages," | sed -e s/,all,/,/ -e s/,c,/,/ ` + + for lang_frag in ${srcdir}/gcc/*/config-lang.in .. ; do + case ${lang_frag} in + ..) ;; + # The odd quoting in the next line works around + # an apparent bug in bash 1.12 on linux. + ${srcdir}/gcc/[[*]]/config-lang.in) ;; + *) + # From the config-lang.in, get $language, $target_libs, + # $lang_dirs, and $build_by_default + language= + target_libs= + lang_dirs= + build_by_default= + . ${lang_frag} + # This is quite sensitive to the ordering of the case statement arms. + case ,${enable_languages},:${language}:${have_gnat}:${build_by_default} in + *::*:*) + echo "${lang_frag} doesn't set \$language." 1>&2 + exit 1 ;; - esac - done - ;; - esac -done + *:ada:no:*) + # Ada was requested with no preexisting GNAT. Disable unconditionally. + add_this_lang=no + ;; + *,${language},*:*:*:*) + # Language was explicitly selected; include it. + add_this_lang=yes + ;; + *,all,*:*:*:no) + # 'all' was selected, but this is not a default language + # so do not include it. + add_this_lang=no + ;; + *,all,*:*:*:*) + # 'all' was selected and this is a default language; include it. + add_this_lang=yes + ;; + *) + add_this_lang=no + ;; + esac + case $add_this_lang in + no) + # Remove language-dependent dirs. + eval noconfigdirs='"$noconfigdirs "'\"$target_libs $lang_dirs\" ;; + *) + new_enable_languages="$new_enable_languages,$language" + missing_languages="`echo "$missing_languages" | sed "s/,$language,/,/"`" ;; + esac + ;; + esac + done -for lang_frag in ${srcdir}/gcc/*/config-lang.in .. ; do - case ${lang_frag} in - ..) ;; - # The odd quoting in the next line works around - # an apparent bug in bash 1.12 on linux. - ${srcdir}/gcc/[[*]]/config-lang.in) ;; - *) - # From the config-lang.in, get $language, $target_libs, - # $lang_dirs, and $build_by_default - language= - target_libs= - lang_dirs= - build_by_default= - . ${lang_frag} - if test "x$language" = x ; then - echo "${lang_frag} doesn't set \$language." 1>&2 - exit 1 - fi - case ,${enable_languages}, in - *,${language},*) - # Language was explicitly selected; include it. - add_this_lang=yes - ;; - *,all,*) - # 'all' was selected; include 'default' languages. - case ${build_by_default} in - no) add_this_lang=no ;; - *) add_this_lang=yes ;; - esac - ;; - *) add_this_lang=no ;; - esac - case ${add_this_lang} in - no) - # Remove language-dependent dirs. - eval noconfigdirs='"$noconfigdirs "'\"$target_libs $lang_dirs\" - ;; - esac - ;; - esac -done + missing_languages="`echo "$missing_languages" | sed -e s/^,// -e s/,$//`" + if test "x$missing_languages" != x; then + AC_MSG_ERROR([ +The following requested languages were not found: ${missing_languages}]) + fi + + if test "x$new_enable_languages" != "x$enable_languages"; then + echo The following languages will be built: ${new_enable_languages} + fi + enable_languages="$new_enable_languages" + ac_configure_args="`echo " $ac_configure_args" | sed -e 's/ --enable-languages=[[^ ]]*//' -e 's/$/ --enable-languages='"$enable_languages"/ `" +fi # Remove the entries in $skipdirs and $noconfigdirs from $configdirs and # $target_configdirs. @@ -1014,157 +1365,6 @@ while test $# != 0 ; do shift; shift done -# Work in distributions that contain no compiler tools, like Autoconf. -tentative_cc="" -host_makefile_frag=/dev/null -if test -d ${srcdir}/config ; then -case "${host}" in - m68k-hp-hpux*) - # Avoid "too much defining" errors from HPUX compiler. - tentative_cc="cc -Wp,-H256000" - # If "ar" in $PATH is GNU ar, the symbol table may need rebuilding. - # If it's HP/UX ar, this should be harmless. - RANLIB="ar ts" - ;; - m68k-apollo-sysv*) - tentative_cc="cc -A ansi -A runtype,any -A systype,any -U__STDC__ -DUSG" - ;; - m68k-apollo-bsd*) - #None of the Apollo compilers can compile gas or binutils. The preprocessor - # chokes on bfd, the compiler won't let you assign integers to enums, and - # other problems. Defining CC to gcc is a questionable way to say "don't use - # the apollo compiler" (the preferred version of GCC could be called cc, - # or whatever), but I'm not sure leaving CC as cc is any better... - #CC=cc -A ansi -A runtype,any -A systype,any -U__STDC__ -DNO_STDARG - # Used to have BISON=yacc. - tentative_cc=gcc - ;; - m88k-dg-dgux*) - tentative_cc="gcc -Wall -ansi -D__using_DGUX" - ;; - m88k-harris-cxux*) - # Under CX/UX, we want to tell the compiler to use ANSI mode. - tentative_cc="cc -Xa" - host_makefile_frag="config/mh-cxux" - ;; - m88k-motorola-sysv*) - ;; - mips*-dec-ultrix*) - tentative_cc="cc -Wf,-XNg1000" - host_makefile_frag="config/mh-decstation" - ;; - mips*-nec-sysv4*) - # The C compiler on NEC MIPS SVR4 needs bigger tables. - tentative_cc="cc -ZXNd=5000 -ZXNg=1000" - host_makefile_frag="config/mh-necv4" - ;; - mips*-sgi-irix4*) - # Tell compiler to use K&R C. We can't compile under the SGI Ansi - # environment. Also bump switch table size so that cp-parse will - # compile. Bump string length limit so linker builds. - tentative_cc="cc -cckr -Wf,-XNg1500 -Wf,-XNk1000 -Wf,-XNh2000 -Wf,-XNl8192" - ;; - mips*-*-sysv4*) - host_makefile_frag="config/mh-sysv4" - ;; - mips*-*-sysv*) - # This is for a MIPS running RISC/os 4.52C. - - # This is needed for GDB, but needs to be in the top-level make because - # if a library is compiled with the bsd headers and gets linked with the - # sysv system libraries all hell can break loose (e.g. a jmp_buf might be - # a different size). - # ptrace(2) apparently has problems in the BSD environment. No workaround is - # known except to select the sysv environment. Could we use /proc instead? - # These "sysv environments" and "bsd environments" often end up being a pain. - # - # This is not part of CFLAGS because perhaps not all C compilers have this - # option. - tentative_cc="cc -systype sysv" - ;; - i370-ibm-opened*) - tentative_cc="c89" - ;; - i[[3456789]]86-*-sysv5*) - host_makefile_frag="config/mh-sysv5" - ;; - i[[3456789]]86-*-dgux*) - tentative_cc="gcc -Wall -ansi -D__using_DGUX" - host_makefile_frag="config/mh-dgux386" - ;; - i[[3456789]]86-ncr-sysv4.3*) - # The MetaWare compiler will generate a copyright message unless you - # turn it off by adding the -Hnocopyr flag. - tentative_cc="cc -Hnocopyr" - ;; - i[[3456789]]86-ncr-sysv4*) - # for an NCR 3000 (i486/SVR4) system. - # The NCR 3000 ships with a MetaWare compiler installed as /bin/cc. - # This compiler not only emits obnoxious copyright messages every time - # you run it, but it chokes and dies on a whole bunch of GNU source - # files. Default to using the AT&T compiler installed in /usr/ccs/ATT/cc. - tentative_cc="/usr/ccs/ATT/cc" - host_makefile_frag="config/mh-ncr3000" - ;; - i[[3456789]]86-*-sco3.2v5*) - ;; - i[[3456789]]86-*-sco*) - # The native C compiler botches some simple uses of const. Unfortunately, - # it doesn't defined anything like "__sco__" for us to test for in ansidecl.h. - tentative_cc="cc -Dconst=" - host_makefile_frag="config/mh-sco" - ;; - i[[3456789]]86-*-udk*) - host_makefile_frag="config/mh-sysv5" - ;; - i[[3456789]]86-*-solaris2*) - host_makefile_frag="config/mh-sysv4" - ;; - i[[3456789]]86-*-msdosdjgpp*) - host_makefile_frag="config/mh-djgpp" - ;; - *-cygwin*) - host_makefile_frag="config/mh-cygwin" - ;; - *-mingw32*) - host_makefile_frag="config/mh-mingw32" - ;; - *-interix*) - host_makefile_frag="config/mh-interix" - ;; - vax-*-ultrix2*) - # The old BSD pcc isn't up to compiling parts of gdb so use gcc - tentative_cc=gcc - ;; - *-*-solaris2*) - host_makefile_frag="config/mh-solaris" - ;; - m68k-sun-sunos*) - # Sun's C compiler needs the -J flag to be able to compile cp-parse.c - # without overflowing the jump tables (-J says to use a 32 bit table) - tentative_cc="cc -J" - ;; - *-hp-hpux*) - tentative_cc="cc -Wp,-H256000" - ;; - *-*-hiux*) - tentative_cc="cc -Wp,-H256000" - ;; - rs6000-*-lynxos*) - # /bin/cc is less than useful for our purposes. Always use GCC - tentative_cc="/usr/cygnus/progressive/bin/gcc" - host_makefile_frag="config/mh-lynxrs6k" - ;; - *-*-lynxos*) - # /bin/cc is less than useful for our purposes. Always use GCC - tentative_cc="/bin/gcc" - ;; - *-*-sysv4*) - host_makefile_frag="config/mh-sysv4" - ;; -esac -fi - extra_arflags_for_target= extra_nmflags_for_target= extra_ranlibflags_for_target= @@ -1279,25 +1479,6 @@ case "${host}" in ;; esac -# If we aren't going to be using gcc, see if we can extract a definition -# of CC from the fragment. -# Actually, use the 'pre-extracted' version above. -if test -z "${CC}" && test "${build}" = "${host}" ; then - IFS="${IFS= }"; save_ifs="$IFS"; IFS="${IFS}:" - found= - for dir in $PATH; do - test -z "$dir" && dir=. - if test -f $dir/gcc; then - found=yes - break - fi - done - IFS="$save_ifs" - if test -z "${found}" && test -n "${tentative_cc}" ; then - CC=$tentative_cc - fi -fi - # Some systems (e.g., one of the i386-aix systems the gas testers are # using) don't handle "\$" correctly, so don't use it here. tooldir='${exec_prefix}'/${target_alias} @@ -1360,157 +1541,6 @@ do test -n "$DEFAULT_LEX" && break done -if test "${build}" != "${host}" ; then - # If we are doing a Canadian Cross, in which the host and build systems - # are not the same, we set reasonable default values for the tools. - - BISON=${BISON-bison} - CC=${CC-${host_alias}-gcc} - CFLAGS=${CFLAGS-"-g -O2"} - CXX=${CXX-${host_alias}-c++} - CXXFLAGS=${CXXFLAGS-"-g -O2"} - CC_FOR_BUILD=${CC_FOR_BUILD-gcc} - CC_FOR_TARGET=${CC_FOR_TARGET-${target_alias}-gcc} - CXX_FOR_TARGET=${CXX_FOR_TARGET-${target_alias}-c++} - GCJ_FOR_TARGET=${GCJ_FOR_TARGET-${target_alias}-gcj} - GCC_FOR_TARGET=${GCC_FOR_TARGET-${CC_FOR_TARGET-${target_alias}-gcc}} - BUILD_PREFIX=${build_alias}- - BUILD_PREFIX_1=${build_alias}- - MAKEINFO=${MAKEINFO-makeinfo} - - if test -z "${YACC}" ; then - IFS="${IFS= }"; save_ifs="$IFS"; IFS="${IFS}:" - for dir in $PATH; do - test -z "$dir" && dir=. - if test -f $dir/bison; then - YACC="bison -y" - break - fi - if test -f $dir/byacc; then - YACC=byacc - break - fi - if test -f $dir/yacc; then - YACC=yacc - break - fi - done - IFS="$save_ifs" - if test -z "${YACC}" ; then - YACC="bison -y" - fi - fi - - if test -z "${LEX}" ; then - IFS="${IFS= }"; save_ifs="$IFS"; IFS="${IFS}:" - for dir in $PATH; do - test -z "$dir" && dir=. - if test -f $dir/flex; then - LEX=flex - break - fi - if test -f $dir/lex; then - LEX=lex - break - fi - done - IFS="$save_ifs" - LEX=${LEX-flex} - fi - -else - # Set reasonable default values for some tools even if not Canadian. - # Of course, these are different reasonable default values, originally - # specified directly in the Makefile. - # We don't export, so that autoconf can do its job. - # Note that all these settings are above the fragment inclusion point - # in Makefile.in, so can still be overridden by fragments. - # This is all going to change when we autoconfiscate... - - BISON="\$(USUAL_BISON)" - CC_FOR_BUILD="\$(CC)" - GCC_FOR_TARGET="\$(USUAL_GCC_FOR_TARGET)" - BUILD_PREFIX= - BUILD_PREFIX_1=loser- - MAKEINFO="\$(USUAL_MAKEINFO)" - LEX="\$(USUAL_LEX)" - YACC="\$(USUAL_YACC)" - - # If CC is still not set, try to get gcc. - cc_prog_is_gcc= - if test -z "${CC}" ; then - IFS="${IFS= }"; save_ifs="$IFS"; IFS="${IFS}:" - for dir in $PATH; do - test -z "$dir" && dir=. - if test -f $dir/gcc; then - CC="gcc" - cc_prog_is_gcc=yes - echo 'void f(){}' > conftest.c - if test -z "`${CC} -g -c conftest.c 2>&1`"; then - CFLAGS=${CFLAGS-"-g -O2"} - CXXFLAGS=${CXXFLAGS-"-g -O2"} - else - CFLAGS=${CFLAGS-"-O2"} - CXXFLAGS=${CXXFLAGS-"-O2"} - fi - rm -f conftest* - break - fi - done - IFS="$save_ifs" - CC=${CC-cc} - else - # Determine if we are using gcc. - cat > conftest.c <<EOF -#ifdef __GNUC__ - yes; -#endif -EOF - if ${CC} -E conftest.c | grep yes >/dev/null 2>&1; then - cc_prog_is_gcc=yes - fi - rm -f conftest.c - if test -z "${CFLAGS}"; then - # Here CC is set but CFLAGS is not. Use a quick hack to use -O2 if CC - # is set to a version of gcc. - if test "$cc_prog_is_gcc" = yes; then - echo 'void f(){}' > conftest.c - if test -z "`${CC} -g -c conftest.c 2>&1`"; then - CFLAGS=${CFLAGS-"-g -O2"} - CXXFLAGS=${CXXFLAGS-"-g -O2"} - else - CFLAGS=${CFLAGS-"-O2"} - CXXFLAGS=${CXXFLAGS-"-O2"} - fi - rm -f conftest* - fi - fi - fi - - # We must set the default linker to the linker used by gcc for the correct - # operation of libtool. If LD is not defined and we are using gcc, try to - # set the LD default to the ld used by gcc. - if test -z "$LD"; then - if test "$cc_prog_is_gcc" = yes; then - case $build in - *-*-mingw*) - gcc_prog_ld=`$CC -print-prog-name=ld 2>&1 | tr -d '\015'` ;; - *) - gcc_prog_ld=`$CC -print-prog-name=ld 2>&1` ;; - esac - case $gcc_prog_ld in - # Accept absolute paths. - [[\\/]* | [A-Za-z]:[\\/]*)] - LD="$gcc_prog_ld" ;; - esac - fi - fi - - CXX=${CXX-"c++"} - CFLAGS=${CFLAGS-"-g"} - CXXFLAGS=${CXXFLAGS-"-g -O2"} -fi - # FIXME Should this be done recursively ??? (Useful for e.g. gdbtest) # Set up the list of links to be made. # ${links} is the list of link names, and ${files} is the list of names to link to. |