aboutsummaryrefslogtreecommitdiff
path: root/configure.ac
diff options
context:
space:
mode:
Diffstat (limited to 'configure.ac')
-rw-r--r--configure.ac46
1 files changed, 23 insertions, 23 deletions
diff --git a/configure.ac b/configure.ac
index c279587..396c87b 100644
--- a/configure.ac
+++ b/configure.ac
@@ -112,11 +112,11 @@ extra_host_args=
### or a host dependent tool. Then put it into the appropriate list
### (library or tools, host or target), doing a dependency sort.
-# Subdirs will be configured in the order listed in build_configdirs,
+# Subdirs will be configured in the order listed in build_configdirs,
# configdirs, or target_configdirs; see the serialization section below.
-# Dependency sorting is only needed when *configuration* must be done in
-# a particular order. In all cases a dependency should be specified in
+# Dependency sorting is only needed when *configuration* must be done in
+# a particular order. In all cases a dependency should be specified in
# the Makefile, whether or not it's implicitly specified here.
# Double entries in build_configdirs, configdirs, or target_configdirs may
@@ -209,7 +209,7 @@ if test x"${host}" = x"${target}" ; then
is_cross_compiler=no
else
is_cross_compiler=yes
-fi
+fi
# Find the build and target subdir names.
GCC_TOPLEV_SUBDIRS
@@ -245,7 +245,7 @@ if test x$with_system_zlib = xyes ; then
noconfigdirs="$noconfigdirs zlib"
fi
-# some tools are so dependent upon X11 that if we're not building with X,
+# some tools are so dependent upon X11 that if we're not building with X,
# it's not even worth trying to configure, much less build, that tool.
case ${with_x} in
@@ -253,7 +253,7 @@ case ${with_x} in
no)
skipdirs="${skipdirs} tk itcl libgui"
# We won't be able to build gdbtk without X.
- enable_gdbtk=no
+ enable_gdbtk=no
;;
*) echo "*** bad value \"${with_x}\" for -with-x flag; ignored" 1>&2 ;;
esac
@@ -313,7 +313,7 @@ case "${ENABLE_GOLD}" in
*-*-elf* | *-*-sysv4* | *-*-unixware* | *-*-eabi* | hppa*64*-*-hpux* \
| *-*-linux* | frv-*-uclinux* | *-*-irix5* | *-*-irix6* \
| *-*-netbsd* | *-*-openbsd* | *-*-freebsd* | *-*-dragonfly* \
- | *-*-solaris2* | *-*-nto*)
+ | *-*-solaris2* | *-*-nto* | *-*-nacl*)
case "${target}" in
*-*-linux*aout* | *-*-linux*oldld*)
;;
@@ -379,7 +379,7 @@ esac
# Only spaces may be used in this macro; not newlines or tabs.
unsupported_languages=
-# Remove more programs from consideration, based on the host or
+# Remove more programs from consideration, based on the host or
# target this usually means that a port of the program doesn't
# exist yet.
@@ -689,7 +689,7 @@ case "${target}" in
;;
*-*-lynxos*)
noconfigdirs="$noconfigdirs ${libgcj}"
- ;;
+ ;;
esac
# Default libgloss CPU subdirectory.
@@ -774,7 +774,7 @@ case "${target}" in
;;
*-*-lynxos*)
noconfigdirs="$noconfigdirs target-newlib target-libgloss"
- ;;
+ ;;
*-*-mingw*)
noconfigdirs="$noconfigdirs target-newlib target-libgloss"
;;
@@ -1078,7 +1078,7 @@ case "${host}" in
hppa*-hp-hpux*)
host_makefile_frag="config/mh-pa"
;;
- hppa*-*)
+ hppa*-*)
host_makefile_frag="config/mh-pa"
;;
*-*-darwin*)
@@ -1774,7 +1774,7 @@ if test -d ${srcdir}/gcc; then
# an apparent bug in bash 1.12 on linux.
${srcdir}/gcc/[[*]]/config-lang.in) ;;
*)
- # From the config-lang.in, get $language, $target_libs,
+ # From the config-lang.in, get $language, $target_libs,
# $lang_dirs, $boot_language, and $build_by_default
language=
target_libs=
@@ -2019,7 +2019,7 @@ done
build_configdirs_all="$build_configdirs"
build_configdirs=
for i in ${build_configdirs_all} ; do
- j=`echo $i | sed -e s/build-//g`
+ j=`echo $i | sed -e s/build-//g`
if test -f ${srcdir}/$j/configure ; then
build_configdirs="${build_configdirs} $i"
fi
@@ -2036,7 +2036,7 @@ done
target_configdirs_all="$target_configdirs"
target_configdirs=
for i in ${target_configdirs_all} ; do
- j=`echo $i | sed -e s/target-//g`
+ j=`echo $i | sed -e s/target-//g`
if test -f ${srcdir}/$j/configure ; then
target_configdirs="${target_configdirs} $i"
fi
@@ -2087,7 +2087,7 @@ ACX_TOOL_DIRS
copy_dirs=
-AC_ARG_WITH([build-sysroot],
+AC_ARG_WITH([build-sysroot],
[AS_HELP_STRING([--with-build-sysroot=SYSROOT],
[use sysroot as the system root during the build])],
[if test x"$withval" != x ; then
@@ -2178,11 +2178,11 @@ fi
# This is done by determining whether or not the appropriate directory
# is available, and by checking whether or not specific configurations
# have requested that this magic not happen.
-#
-# The command line options always override the explicit settings in
+#
+# The command line options always override the explicit settings in
# configure.in, and the settings in configure.in override this magic.
#
-# If the default for a toolchain is to use GNU as and ld, and you don't
+# If the default for a toolchain is to use GNU as and ld, and you don't
# want to do that, then you should use the --without-gnu-as and
# --without-gnu-ld options for the configure script. Similarly, if
# the default is to use the included zlib and you don't want to do that,
@@ -2283,7 +2283,7 @@ case "${target}" in
target_makefile_frag="config/mt-gnu"
;;
*-*-aix4.[[3456789]]* | *-*-aix[[56789]].*)
- # nm and ar from AIX 4.3 and above require -X32_64 flag to all ar and nm
+ # nm and ar from AIX 4.3 and above require -X32_64 flag to all ar and nm
# commands to handle both 32-bit and 64-bit objects. These flags are
# harmless if we're using GNU nm or ar.
extra_arflags_for_target=" -X32_64"
@@ -2357,7 +2357,7 @@ if test $? = 0 ; then
if test -s conftest || test -s conftest.exe ; then
we_are_ok=yes
fi
-fi
+fi
case $we_are_ok in
no)
echo 1>&2 "*** The command '${CC} -o conftest ${CFLAGS} ${CPPFLAGS} ${LDFLAGS} conftest.c' failed."
@@ -2727,7 +2727,7 @@ baseargs=`echo "x$baseargs" | sed -e 's/^x *//' -e 's,\\$,$$,g'`
# --program-suffix have been applied to it. Autoconf has already
# doubled dollar signs and backslashes in program_transform_name; we want
# the backslashes un-doubled, and then the entire thing wrapped in single
-# quotes, because this will be expanded first by make and then by the shell.
+# quotes, because this will be expanded first by make and then by the shell.
# Also, because we want to override the logic in subdir configure scripts to
# choose program_transform_name, replace any s,x,x, with s,y,y,.
sed -e "s,\\\\\\\\,\\\\,g; s,','\\\\'',g; s/s,x,x,/s,y,y,/" <<EOF_SED > conftestsed.out
@@ -3052,7 +3052,7 @@ AC_SUBST(CFLAGS)
AC_SUBST(CXXFLAGS)
# Target tools.
-AC_ARG_WITH([build-time-tools],
+AC_ARG_WITH([build-time-tools],
[AS_HELP_STRING([--with-build-time-tools=PATH],
[use given path to find target tools during the build])],
[case x"$withval" in
@@ -3157,7 +3157,7 @@ if test "$USE_MAINTAINER_MODE" = yes; then
else
MAINTAINER_MODE_TRUE='#'
MAINTAINER_MODE_FALSE=
-fi
+fi
MAINT=$MAINTAINER_MODE_TRUE
AC_SUBST(MAINT)dnl