diff options
Diffstat (limited to 'binutils/doc/Makefile.in')
| -rw-r--r-- | binutils/doc/Makefile.in | 248 |
1 files changed, 178 insertions, 70 deletions
diff --git a/binutils/doc/Makefile.in b/binutils/doc/Makefile.in index 88d01d0..e450007 100644 --- a/binutils/doc/Makefile.in +++ b/binutils/doc/Makefile.in @@ -1,9 +1,8 @@ -# Makefile.in generated by automake 1.11.6 from Makefile.am. +# Makefile.in generated by automake 1.15.1 from Makefile.am. # @configure_input@ -# Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, -# 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011 Free Software -# Foundation, Inc. +# Copyright (C) 1994-2017 Free Software Foundation, Inc. + # This Makefile.in is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, # with or without modifications, as long as this notice is preserved. @@ -33,23 +32,61 @@ # <http://www.gnu.org/licenses/>. # VPATH = @srcdir@ -am__make_dryrun = \ - { \ - am__dry=no; \ +am__is_gnu_make = { \ + if test -z '$(MAKELEVEL)'; then \ + false; \ + elif test -n '$(MAKE_HOST)'; then \ + true; \ + elif test -n '$(MAKE_VERSION)' && test -n '$(CURDIR)'; then \ + true; \ + else \ + false; \ + fi; \ +} +am__make_running_with_option = \ + case $${target_option-} in \ + ?) ;; \ + *) echo "am__make_running_with_option: internal error: invalid" \ + "target option '$${target_option-}' specified" >&2; \ + exit 1;; \ + esac; \ + has_opt=no; \ + sane_makeflags=$$MAKEFLAGS; \ + if $(am__is_gnu_make); then \ + sane_makeflags=$$MFLAGS; \ + else \ case $$MAKEFLAGS in \ *\\[\ \ ]*) \ - echo 'am--echo: ; @echo "AM" OK' | $(MAKE) -f - 2>/dev/null \ - | grep '^AM OK$$' >/dev/null || am__dry=yes;; \ - *) \ - for am__flg in $$MAKEFLAGS; do \ - case $$am__flg in \ - *=*|--*) ;; \ - *n*) am__dry=yes; break;; \ - esac; \ - done;; \ + bs=\\; \ + sane_makeflags=`printf '%s\n' "$$MAKEFLAGS" \ + | sed "s/$$bs$$bs[$$bs $$bs ]*//g"`;; \ esac; \ - test $$am__dry = yes; \ - } + fi; \ + skip_next=no; \ + strip_trailopt () \ + { \ + flg=`printf '%s\n' "$$flg" | sed "s/$$1.*$$//"`; \ + }; \ + for flg in $$sane_makeflags; do \ + test $$skip_next = yes && { skip_next=no; continue; }; \ + case $$flg in \ + *=*|--*) continue;; \ + -*I) strip_trailopt 'I'; skip_next=yes;; \ + -*I?*) strip_trailopt 'I';; \ + -*O) strip_trailopt 'O'; skip_next=yes;; \ + -*O?*) strip_trailopt 'O';; \ + -*l) strip_trailopt 'l'; skip_next=yes;; \ + -*l?*) strip_trailopt 'l';; \ + -[dEDm]) skip_next=yes;; \ + -[JT]) skip_next=yes;; \ + esac; \ + case $$flg in \ + *$$target_option*) has_opt=yes; break;; \ + esac; \ + done; \ + test $$has_opt = yes +am__make_dryrun = (target_option=n; $(am__make_running_with_option)) +am__make_keepgoing = (target_option=k; $(am__make_running_with_option)) pkgdatadir = $(datadir)/@PACKAGE@ pkgincludedir = $(includedir)/@PACKAGE@ pkglibdir = $(libdir)/@PACKAGE@ @@ -70,7 +107,6 @@ build_triplet = @build@ host_triplet = @host@ target_triplet = @target@ subdir = doc -DIST_COMMON = $(srcdir)/Makefile.in $(srcdir)/Makefile.am ACLOCAL_M4 = $(top_srcdir)/aclocal.m4 am__aclocal_m4_deps = $(top_srcdir)/../bfd/acinclude.m4 \ $(top_srcdir)/../bfd/warning.m4 $(top_srcdir)/../config/acx.m4 \ @@ -94,16 +130,55 @@ am__aclocal_m4_deps = $(top_srcdir)/../bfd/acinclude.m4 \ $(top_srcdir)/../bfd/version.m4 $(top_srcdir)/configure.ac am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \ $(ACLOCAL_M4) +DIST_COMMON = $(srcdir)/Makefile.am $(am__DIST_COMMON) mkinstalldirs = $(SHELL) $(top_srcdir)/../mkinstalldirs CONFIG_HEADER = $(top_builddir)/config.h CONFIG_CLEAN_FILES = CONFIG_CLEAN_VPATH_FILES = -depcomp = -am__depfiles_maybe = +AM_V_P = $(am__v_P_@AM_V@) +am__v_P_ = $(am__v_P_@AM_DEFAULT_V@) +am__v_P_0 = false +am__v_P_1 = : +AM_V_GEN = $(am__v_GEN_@AM_V@) +am__v_GEN_ = $(am__v_GEN_@AM_DEFAULT_V@) +am__v_GEN_0 = @echo " GEN " $@; +am__v_GEN_1 = +AM_V_at = $(am__v_at_@AM_V@) +am__v_at_ = $(am__v_at_@AM_DEFAULT_V@) +am__v_at_0 = @ +am__v_at_1 = SOURCES = +DIST_SOURCES = +AM_V_DVIPS = $(am__v_DVIPS_@AM_V@) +am__v_DVIPS_ = $(am__v_DVIPS_@AM_DEFAULT_V@) +am__v_DVIPS_0 = @echo " DVIPS " $@; +am__v_DVIPS_1 = +AM_V_MAKEINFO = $(am__v_MAKEINFO_@AM_V@) +am__v_MAKEINFO_ = $(am__v_MAKEINFO_@AM_DEFAULT_V@) +am__v_MAKEINFO_0 = @echo " MAKEINFO" $@; +am__v_MAKEINFO_1 = +AM_V_INFOHTML = $(am__v_INFOHTML_@AM_V@) +am__v_INFOHTML_ = $(am__v_INFOHTML_@AM_DEFAULT_V@) +am__v_INFOHTML_0 = @echo " INFOHTML" $@; +am__v_INFOHTML_1 = +AM_V_TEXI2DVI = $(am__v_TEXI2DVI_@AM_V@) +am__v_TEXI2DVI_ = $(am__v_TEXI2DVI_@AM_DEFAULT_V@) +am__v_TEXI2DVI_0 = @echo " TEXI2DVI" $@; +am__v_TEXI2DVI_1 = +AM_V_TEXI2PDF = $(am__v_TEXI2PDF_@AM_V@) +am__v_TEXI2PDF_ = $(am__v_TEXI2PDF_@AM_DEFAULT_V@) +am__v_TEXI2PDF_0 = @echo " TEXI2PDF" $@; +am__v_TEXI2PDF_1 = +AM_V_texinfo = $(am__v_texinfo_@AM_V@) +am__v_texinfo_ = $(am__v_texinfo_@AM_DEFAULT_V@) +am__v_texinfo_0 = -q +am__v_texinfo_1 = +AM_V_texidevnull = $(am__v_texidevnull_@AM_V@) +am__v_texidevnull_ = $(am__v_texidevnull_@AM_DEFAULT_V@) +am__v_texidevnull_0 = > /dev/null +am__v_texidevnull_1 = INFO_DEPS = binutils.info -TEXINFO_TEX = $(top_srcdir)/../texinfo/texinfo.tex -am__TEXINFO_TEX_DIR = $(top_srcdir)/../texinfo +am__TEXINFO_TEX_DIR = $(srcdir) DVIS = binutils.dvi PDFS = binutils.pdf PSS = binutils.ps @@ -118,6 +193,7 @@ am__can_run_installinfo = \ n|no|NO) false;; \ *) (install-info --version) >/dev/null 2>&1;; \ esac +am__installdirs = "$(DESTDIR)$(infodir)" "$(DESTDIR)$(man1dir)" am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; am__vpath_adj = case $$p in \ $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \ @@ -146,12 +222,15 @@ am__uninstall_files_from_dir = { \ $(am__cd) "$$dir" && rm -f $$files; }; \ } man1dir = $(mandir)/man1 -am__installdirs = "$(DESTDIR)$(man1dir)" NROFF = nroff MANS = $(man_MANS) +am__tagged_files = $(HEADERS) $(SOURCES) $(TAGS_FILES) $(LISP) +am__DIST_COMMON = $(srcdir)/Makefile.in $(top_srcdir)/../mkinstalldirs +DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST) ACLOCAL = @ACLOCAL@ ALLOCA = @ALLOCA@ AMTAR = @AMTAR@ +AM_DEFAULT_VERBOSITY = @AM_DEFAULT_VERBOSITY@ AR = @AR@ AUTOCONF = @AUTOCONF@ AUTOHEADER = @AUTOHEADER@ @@ -309,7 +388,7 @@ top_builddir = @top_builddir@ top_srcdir = @top_srcdir@ zlibdir = @zlibdir@ zlibinc = @zlibinc@ -AUTOMAKE_OPTIONS = cygnus +AUTOMAKE_OPTIONS = info-in-builddir no-texinfo.tex # What version of the manual you want; "all" includes everything CONFIG = all @@ -367,10 +446,9 @@ $(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.am $(am__confi exit 1;; \ esac; \ done; \ - echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign doc/Makefile'; \ + echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu doc/Makefile'; \ $(am__cd) $(top_srcdir) && \ - $(AUTOMAKE) --foreign doc/Makefile -.PRECIOUS: Makefile + $(AUTOMAKE) --gnu doc/Makefile Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status @case '$?' in \ *config.status*) \ @@ -396,7 +474,7 @@ clean-libtool: -rm -rf .libs _libs binutils.info: binutils.texi - restore=: && backupdir="$(am__leading_dot)am$$$$" && \ + $(AM_V_MAKEINFO)restore=: && backupdir="$(am__leading_dot)am$$$$" && \ rm -rf $$backupdir && mkdir $$backupdir && \ if ($(MAKEINFO) --version) >/dev/null 2>&1; then \ for f in $@ $@-[0-9] $@-[0-9][0-9] $(@:.info=).i[0-9] $(@:.info=).i[0-9][0-9]; do \ @@ -414,31 +492,29 @@ binutils.info: binutils.texi rm -rf $$backupdir; exit $$rc binutils.dvi: binutils.texi - TEXINPUTS="$(am__TEXINFO_TEX_DIR)$(PATH_SEPARATOR)$$TEXINPUTS" \ + $(AM_V_TEXI2DVI)TEXINPUTS="$(am__TEXINFO_TEX_DIR)$(PATH_SEPARATOR)$$TEXINPUTS" \ MAKEINFO='$(MAKEINFO) $(AM_MAKEINFOFLAGS) $(MAKEINFOFLAGS) -I $(srcdir)' \ - $(TEXI2DVI) -o $@ `test -f 'binutils.texi' || echo '$(srcdir)/'`binutils.texi + $(TEXI2DVI) $(AM_V_texinfo) --build-dir=$(@:.dvi=.t2d) -o $@ $(AM_V_texidevnull) \ + `test -f 'binutils.texi' || echo '$(srcdir)/'`binutils.texi binutils.pdf: binutils.texi - TEXINPUTS="$(am__TEXINFO_TEX_DIR)$(PATH_SEPARATOR)$$TEXINPUTS" \ + $(AM_V_TEXI2PDF)TEXINPUTS="$(am__TEXINFO_TEX_DIR)$(PATH_SEPARATOR)$$TEXINPUTS" \ MAKEINFO='$(MAKEINFO) $(AM_MAKEINFOFLAGS) $(MAKEINFOFLAGS) -I $(srcdir)' \ - $(TEXI2PDF) -o $@ `test -f 'binutils.texi' || echo '$(srcdir)/'`binutils.texi + $(TEXI2PDF) $(AM_V_texinfo) --build-dir=$(@:.pdf=.t2p) -o $@ $(AM_V_texidevnull) \ + `test -f 'binutils.texi' || echo '$(srcdir)/'`binutils.texi binutils.html: binutils.texi - rm -rf $(@:.html=.htp) - if $(MAKEINFOHTML) $(AM_MAKEINFOHTMLFLAGS) $(MAKEINFOFLAGS) -I $(srcdir) \ + $(AM_V_MAKEINFO)rm -rf $(@:.html=.htp) + $(AM_V_at)if $(MAKEINFOHTML) $(AM_MAKEINFOHTMLFLAGS) $(MAKEINFOFLAGS) -I $(srcdir) \ -o $(@:.html=.htp) `test -f 'binutils.texi' || echo '$(srcdir)/'`binutils.texi; \ then \ - rm -rf $@; \ - if test ! -d $(@:.html=.htp) && test -d $(@:.html=); then \ - mv $(@:.html=) $@; else mv $(@:.html=.htp) $@; fi; \ + rm -rf $@ && mv $(@:.html=.htp) $@; \ else \ - if test ! -d $(@:.html=.htp) && test -d $(@:.html=); then \ - rm -rf $(@:.html=); else rm -Rf $(@:.html=.htp) $@; fi; \ - exit 1; \ + rm -rf $(@:.html=.htp); exit 1; \ fi .dvi.ps: - TEXINPUTS="$(am__TEXINFO_TEX_DIR)$(PATH_SEPARATOR)$$TEXINPUTS" \ - $(DVIPS) -o $@ $< + $(AM_V_DVIPS)TEXINPUTS="$(am__TEXINFO_TEX_DIR)$(PATH_SEPARATOR)$$TEXINPUTS" \ + $(DVIPS) $(AM_V_texinfo) -o $@ $< uninstall-dvi-am: @$(NORMAL_UNINSTALL) @@ -517,10 +593,7 @@ dist-info: $(INFO_DEPS) done mostlyclean-aminfo: - -rm -rf binutils.aux binutils.cp binutils.cps binutils.fn binutils.fns \ - binutils.ky binutils.log binutils.pg binutils.pgs \ - binutils.tmp binutils.toc binutils.tp binutils.tps \ - binutils.vr binutils.vrs + -rm -rf binutils.t2d binutils.t2p clean-aminfo: -test -z "binutils.dvi binutils.pdf binutils.ps binutils.html" \ @@ -532,8 +605,6 @@ maintainer-clean-aminfo: echo " rm -f $$i $$i-[0-9] $$i-[0-9][0-9] $$i_i[0-9] $$i_i[0-9][0-9]"; \ rm -f $$i $$i-[0-9] $$i-[0-9][0-9] $$i_i[0-9] $$i_i[0-9][0-9]; \ done - -clean-info: mostlyclean-aminfo clean-aminfo install-man1: $(man_MANS) @$(NORMAL_INSTALL) @list1=''; \ @@ -577,17 +648,51 @@ uninstall-man1: } | sed -e 's,.*/,,;h;s,.*\.,,;s,^[^1][0-9a-z]*$$,1,;x' \ -e 's,\.[0-9a-z]*$$,,;$(transform);G;s,\n,.,'`; \ dir='$(DESTDIR)$(man1dir)'; $(am__uninstall_files_from_dir) -tags: TAGS -TAGS: - -ctags: CTAGS -CTAGS: - -check-am: +tags TAGS: + +ctags CTAGS: + +cscope cscopelist: + + +distdir: $(DISTFILES) + @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ + topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ + list='$(DISTFILES)'; \ + dist_files=`for file in $$list; do echo $$file; done | \ + sed -e "s|^$$srcdirstrip/||;t" \ + -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \ + case $$dist_files in \ + */*) $(MKDIR_P) `echo "$$dist_files" | \ + sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \ + sort -u` ;; \ + esac; \ + for file in $$dist_files; do \ + if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \ + if test -d $$d/$$file; then \ + dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \ + if test -d "$(distdir)/$$file"; then \ + find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \ + fi; \ + if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \ + cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \ + find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \ + fi; \ + cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \ + else \ + test -f "$(distdir)/$$file" \ + || cp -p $$d/$$file "$(distdir)/$$file" \ + || exit 1; \ + fi; \ + done + $(MAKE) $(AM_MAKEFLAGS) \ + top_distdir="$(top_distdir)" distdir="$(distdir)" \ + dist-info +check-am: all-am check: check-am -all-am: Makefile $(MANS) +all-am: Makefile $(INFO_DEPS) $(MANS) installdirs: - for dir in "$(DESTDIR)$(man1dir)"; do \ + for dir in "$(DESTDIR)$(infodir)" "$(DESTDIR)$(man1dir)"; do \ test -z "$$dir" || $(MKDIR_P) "$$dir"; \ done install: install-am @@ -643,7 +748,7 @@ info: info-am info-am: $(INFO_DEPS) info-local -install-data-am: install-data-local install-man +install-data-am: install-data-local install-info-am install-man install-dvi: install-dvi-am @@ -788,20 +893,23 @@ uninstall-man: uninstall-man1 .MAKE: install-am install-strip .PHONY: all all-am check check-am clean clean-aminfo clean-generic \ - clean-info clean-libtool dist-info distclean distclean-generic \ - distclean-libtool dvi dvi-am html html-am info info-am \ - info-local install install-am install-data install-data-am \ - install-data-local install-dvi install-dvi-am install-exec \ - install-exec-am install-html install-html-am install-info \ - install-info-am install-man install-man1 install-pdf \ - install-pdf-am install-ps install-ps-am install-strip \ - installcheck installcheck-am installdirs maintainer-clean \ - maintainer-clean-aminfo maintainer-clean-generic mostlyclean \ - mostlyclean-aminfo mostlyclean-generic mostlyclean-libtool pdf \ - pdf-am ps ps-am uninstall uninstall-am uninstall-dvi-am \ + clean-libtool cscopelist-am ctags-am dist-info distclean \ + distclean-generic distclean-libtool distdir dvi dvi-am html \ + html-am info info-am info-local install install-am \ + install-data install-data-am install-data-local install-dvi \ + install-dvi-am install-exec install-exec-am install-html \ + install-html-am install-info install-info-am install-man \ + install-man1 install-pdf install-pdf-am install-ps \ + install-ps-am install-strip installcheck installcheck-am \ + installdirs maintainer-clean maintainer-clean-aminfo \ + maintainer-clean-generic mostlyclean mostlyclean-aminfo \ + mostlyclean-generic mostlyclean-libtool pdf pdf-am ps ps-am \ + tags-am uninstall uninstall-am uninstall-dvi-am \ uninstall-html-am uninstall-info-am uninstall-man \ uninstall-man1 uninstall-pdf-am uninstall-ps-am +.PRECIOUS: Makefile + # Man page generation from texinfo addr2line.1: $(binutils_TEXI) $(binutils_TEXINFOS) |