diff options
-rw-r--r-- | gdb/ChangeLog | 15 | ||||
-rw-r--r-- | gdb/config/h8300/tm-h8300.h | 1 | ||||
-rw-r--r-- | gdb/config/h8500/tm-h8500.h | 1 | ||||
-rw-r--r-- | gdb/config/m88k/tm-m88k.h | 107 | ||||
-rw-r--r-- | gdb/config/sh/tm-sh.h | 1 | ||||
-rw-r--r-- | gdb/config/z8k/tm-z8k.h | 1 | ||||
-rw-r--r-- | gdb/z8k-tdep.c | 6 |
7 files changed, 112 insertions, 20 deletions
diff --git a/gdb/ChangeLog b/gdb/ChangeLog index 6937384..c27d996 100644 --- a/gdb/ChangeLog +++ b/gdb/ChangeLog @@ -1,3 +1,18 @@ +Thu Sep 23 10:49:37 1993 Jim Kingdon (kingdon@lioth.cygnus.com) + + * infcmd.c (step_1), infrun.c (wait_for_inferior): Add comments + about SHIFT_INST_REGS. + + * exec.c (exec_file_command): Set text_end based on all code readonly + sections, not just ".text". + + * defs.h, infcmd.c, config/z8k/tm-z8k.h, config/m88k/tm-m88k.h, + config/sh/tm-sh.h, config/h8300/tm-h8300.h, config/h8500/tm-h8500.h, + z8k-tdep.c: Remove all references to ADDR_BITS_SET. + * config/m88k/tm-m88k.h: Define TARGET_WRITE_PC. + + * config/m88k/tm-m88k.h: Add definitions for calling functions. + Thu Sep 23 00:13:06 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de) * config/mips/tm-mips.h (STORE_STRUCT_RETURN): Define as noop as diff --git a/gdb/config/h8300/tm-h8300.h b/gdb/config/h8300/tm-h8300.h index 67f5aa3..16d5415 100644 --- a/gdb/config/h8300/tm-h8300.h +++ b/gdb/config/h8300/tm-h8300.h @@ -284,7 +284,6 @@ extern CORE_ADDR h8300_skip_prologue (); typedef unsigned short INSN_WORD; #define ADDR_BITS_REMOVE(addr) ((addr) & 0xffff) -#define ADDR_BITS_SET(addr) (((addr))) #define DONT_USE_REMOTE diff --git a/gdb/config/h8500/tm-h8500.h b/gdb/config/h8500/tm-h8500.h index 75e377a..c908bf8 100644 --- a/gdb/config/h8500/tm-h8500.h +++ b/gdb/config/h8500/tm-h8500.h @@ -277,7 +277,6 @@ CORE_ADDR h8500_frame_chain (/* FRAME thisframe */); typedef unsigned short INSN_WORD; #define ADDR_BITS_REMOVE(addr) ((addr) & 0xffffff) -#define ADDR_BITS_SET(addr) (((addr))) #define read_memory_short(x) (read_memory_integer(x,2) & 0xffff) #define DONT_USE_REMOTE diff --git a/gdb/config/m88k/tm-m88k.h b/gdb/config/m88k/tm-m88k.h index 7c64e0d..68bdd61 100644 --- a/gdb/config/m88k/tm-m88k.h +++ b/gdb/config/m88k/tm-m88k.h @@ -66,7 +66,6 @@ extern CORE_ADDR skip_prologue (); of an instruction. Shrug. */ #define ADDR_BITS_REMOVE(addr) ((addr) & ~3) -#define ADDR_BITS_SET(addr) (((addr) | 0x00000002) - 4) /* Immediately after a function call, return the saved pc. Can't always go through the frames for this because on some machines @@ -523,15 +522,103 @@ void frame_find_saved_regs PARAMS((struct frame_info *fi, frame_find_saved_regs (frame_info, &frame_saved_regs) -/* There is not currently a functioning way to call functions in the - inferior. */ +#define POP_FRAME pop_frame () +extern void pop_frame (); -/* But if there was this is where we'd put the call dummy. */ -/* #define CALL_DUMMY_LOCATION AFTER_TEXT_END */ +/* Call function stuff contributed by Kevin Buettner of Motorola. */ + +#define CALL_DUMMY_LOCATION AFTER_TEXT_END + +extern void m88k_push_dummy_frame(); +#define PUSH_DUMMY_FRAME m88k_push_dummy_frame() + +#define CALL_DUMMY { \ +0x67ff00c0, /* 0: subu #sp,#sp,0xc0 */ \ +0x243f0004, /* 4: st #r1,#sp,0x4 */ \ +0x245f0008, /* 8: st #r2,#sp,0x8 */ \ +0x247f000c, /* c: st #r3,#sp,0xc */ \ +0x249f0010, /* 10: st #r4,#sp,0x10 */ \ +0x24bf0014, /* 14: st #r5,#sp,0x14 */ \ +0x24df0018, /* 18: st #r6,#sp,0x18 */ \ +0x24ff001c, /* 1c: st #r7,#sp,0x1c */ \ +0x251f0020, /* 20: st #r8,#sp,0x20 */ \ +0x253f0024, /* 24: st #r9,#sp,0x24 */ \ +0x255f0028, /* 28: st #r10,#sp,0x28 */ \ +0x257f002c, /* 2c: st #r11,#sp,0x2c */ \ +0x259f0030, /* 30: st #r12,#sp,0x30 */ \ +0x25bf0034, /* 34: st #r13,#sp,0x34 */ \ +0x25df0038, /* 38: st #r14,#sp,0x38 */ \ +0x25ff003c, /* 3c: st #r15,#sp,0x3c */ \ +0x261f0040, /* 40: st #r16,#sp,0x40 */ \ +0x263f0044, /* 44: st #r17,#sp,0x44 */ \ +0x265f0048, /* 48: st #r18,#sp,0x48 */ \ +0x267f004c, /* 4c: st #r19,#sp,0x4c */ \ +0x269f0050, /* 50: st #r20,#sp,0x50 */ \ +0x26bf0054, /* 54: st #r21,#sp,0x54 */ \ +0x26df0058, /* 58: st #r22,#sp,0x58 */ \ +0x26ff005c, /* 5c: st #r23,#sp,0x5c */ \ +0x271f0060, /* 60: st #r24,#sp,0x60 */ \ +0x273f0064, /* 64: st #r25,#sp,0x64 */ \ +0x275f0068, /* 68: st #r26,#sp,0x68 */ \ +0x277f006c, /* 6c: st #r27,#sp,0x6c */ \ +0x279f0070, /* 70: st #r28,#sp,0x70 */ \ +0x27bf0074, /* 74: st #r29,#sp,0x74 */ \ +0x27df0078, /* 78: st #r30,#sp,0x78 */ \ +0x63df0000, /* 7c: addu #r30,#sp,0x0 */ \ +0x145f0000, /* 80: ld #r2,#sp,0x0 */ \ +0x147f0004, /* 84: ld #r3,#sp,0x4 */ \ +0x149f0008, /* 88: ld #r4,#sp,0x8 */ \ +0x14bf000c, /* 8c: ld #r5,#sp,0xc */ \ +0x14df0010, /* 90: ld #r6,#sp,0x10 */ \ +0x14ff0014, /* 94: ld #r7,#sp,0x14 */ \ +0x151f0018, /* 98: ld #r8,#sp,0x18 */ \ +0x153f001c, /* 9c: ld #r9,#sp,0x1c */ \ +0x5c200000, /* a0: or.u #r1,#r0,0x0 */ \ +0x58210000, /* a4: or #r1,#r1,0x0 */ \ +0xf400c801, /* a8: jsr #r1 */ \ +0xf000d1ff /* ac: tb0 0x0,#r0,0x1ff */ \ +} -/* When popping a frame on the 88k (say when doing a return command), the - calling function only expects to have the "preserved" registers restored. - Thus, those are the only ones that we even try to restore here. */ +#define CALL_DUMMY_START_OFFSET 0x80 +#define CALL_DUMMY_LENGTH 0xb0 + +/* FIXME: byteswapping. */ +#define FIX_CALL_DUMMY(dummy, pc, fun, nargs, args, type, gcc_p) \ +{ \ + *(unsigned long *)((char *) (dummy) + 0xa0) |= \ + (((unsigned long) (fun)) >> 16); \ + *(unsigned long *)((char *) (dummy) + 0xa4) |= \ + (((unsigned long) (fun)) & 0xffff); \ + pc = text_end; \ +} -#define POP_FRAME pop_frame () -extern void pop_frame (); +#define STACK_ALIGN(addr) (((addr)+7) & -8) + +#define STORE_STRUCT_RETURN(addr, sp) \ + write_register (SRA_REGNUM, (addr)) + +#define NEED_TEXT_START_END 1 + +/* According to the MC88100 RISC Microprocessor User's Manual, section + 6.4.3.1.2: + + ... can be made to return to a particular instruction by placing a + valid instruction address in the SNIP and the next sequential + instruction address in the SFIP (with V bits set and E bits clear). + The rte resumes execution at the instruction pointed to by the + SNIP, then the SFIP. + + The E bit is the least significant bit (bit 0). The V (valid) bit is + bit 1. This is why we logical or 2 into the values we are writing + below. It turns out that SXIP plays no role when returning from an + exception so nothing special has to be done with it. We could even + (presumably) give it a totally bogus value. + + -- Kevin Buettner +*/ + +#define TARGET_WRITE_PC(val) { \ + write_register(SXIP_REGNUM, (long) val); \ + write_register(SNIP_REGNUM, (long) val | 2); \ + write_register(SFIP_REGNUM, ((long) val | 2) + 4); \ +} diff --git a/gdb/config/sh/tm-sh.h b/gdb/config/sh/tm-sh.h index b1f53c2..784a483 100644 --- a/gdb/config/sh/tm-sh.h +++ b/gdb/config/sh/tm-sh.h @@ -226,7 +226,6 @@ extern CORE_ADDR sh_skip_prologue (); typedef unsigned short INSN_WORD; #define ADDR_BITS_REMOVE(addr) ((addr) & 0xffffff) -#define ADDR_BITS_SET(addr) (addr) #define CALL_DUMMY_LENGTH 10 diff --git a/gdb/config/z8k/tm-z8k.h b/gdb/config/z8k/tm-z8k.h index 1599ea4..5412c04 100644 --- a/gdb/config/z8k/tm-z8k.h +++ b/gdb/config/z8k/tm-z8k.h @@ -291,7 +291,6 @@ extern void z8k_pop_frame PARAMS ((void)); #define SP_ARG0 (1 * 4) #define ADDR_BITS_REMOVE(x) addr_bits_remove(x) -#define ADDR_BITS_SET(x) addr_bits_set(x) int z8001_mode; #define BIG (z8001_mode) diff --git a/gdb/z8k-tdep.c b/gdb/z8k-tdep.c index eb596bb..e6b5e8a 100644 --- a/gdb/z8k-tdep.c +++ b/gdb/z8k-tdep.c @@ -296,12 +296,6 @@ frame_find_saved_regs (fip, fsrp) } -void -addr_bits_set () -{ - abort (); -} - int saved_pc_after_call () { |