aboutsummaryrefslogtreecommitdiff
diff options
context:
space:
mode:
Diffstat
-rw-r--r--bfd/Makefile.in163
-rwxr-xr-xbfd/configure845
-rw-r--r--binutils/Makefile.in189
-rwxr-xr-xbinutils/configure845
4 files changed, 2042 insertions, 0 deletions
diff --git a/bfd/Makefile.in b/bfd/Makefile.in
new file mode 100644
index 0000000..5741343
--- /dev/null
+++ b/bfd/Makefile.in
@@ -0,0 +1,163 @@
+#
+# Copyright (C) 1990, 1991 Free Software Foundation, Inc.
+#
+# This file is part of BFD, the Binary File Diddler.
+#
+# BFD is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 1, or (at your option)
+# any later version.
+#
+# BFD is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with BFD; see the file COPYING. If not, write to
+# the Free Software Foundation, 675 Mass Ave, Cambridge, MA 02139, USA. */
+
+# $Id$
+
+srcdir = .
+
+RANLIB = ranlib
+AR =
+INCDIR = $(srcdir)/../include-cygnus
+CSEARCH = -I$(INCDIR)
+
+# These things now done from host specific Makefile fragments.
+#CSWITCHES = -g # -Wall
+#CDEFINES = # -DHOST_SYS=AIX_SYS # -DCOFF_TIMESTAMP -DANSI_LIBRARIES
+
+#### host and target dependent Makefile fragments come in here.
+
+###
+
+TARG = libbfd.a
+CFLAGS = -g $(CDEFINES) $(CSEARCH) $(CSWITCHES) -DINTEL960VERSION
+
+
+BFD_LIBS = libbfd.o opncls.o bfd.o archive.o targets.o cache.o archures.o
+
+BFD_BACKENDS = sunos.o icoff.o b.out.o # srec.o # bcs88kcoff.o
+
+BFD_H=$(INCDIR)/bfd.h
+SYSDEP_H=$(INCDIR)/sysdep.h
+
+# C source files that correspond to .o's.
+CFILES = libbfd.c opncls.c bfd.c archive.c targets.c cache.c archures.c \
+ sunos.c icoff.c b.out.c # srec.c # bcs88kcoff.c
+
+all: $(TARG)
+
+POINTOS = $(BFD_LIBS) $(BFD_BACKENDS)
+
+$(TARG): $(POINTOS)
+ rm -f $(TARG)
+ ar clq $(TARG) $(BFD_LIBS) $(BFD_BACKENDS)
+ ranlib $(TARG)
+
+tags etags: TAGS
+
+TAGS: .force
+ etags $(INCDIR)/*.h *.h *.c
+
+clean:
+ rm -f $(BFD_LIBS) $(BFD_BACKENDS) *~ core libbfd.a
+
+clobber realclean: clean
+ rm -f libbfd.a TAGS
+
+$(BFD_LIBS) $(BFD_BACKENDS): libbfd.h $(BFD_H)
+
+saber:
+ #suppress 65 on bfd_map_over_sections
+ #suppress 66 on bfd_map_over_sections
+ #suppress 67 on bfd_map_over_sections
+ #suppress 68 on bfd_map_over_sections
+ #suppress 69 on bfd_map_over_sections
+ #suppress 70 on bfd_map_over_sections
+ #suppress 110 in bfd_map_over_sections
+ #suppress 112 in bfd_map_over_sections
+ #suppress 530
+ #suppress 590 in swap_exec_header
+ #suppress 590 in _bfd_dummy_core_file_matches_executable_p
+ #suppress 590 in bfd_dont_truncate_arname
+ #suppress 590 on ignore
+ #suppress 590 on abfd
+ #setopt load_flags $(CFLAGS)
+ #load $(CFILES)
+
+archive.o : archive.c libbfd.h $(BFD_H) $(SYSDEP_H)
+archures.o : archures.c $(BFD_H) $(SYSDEP_H) archures.h
+b.out.o : b.out.c libbfd.h $(BFD_H) $(SYSDEP_H) liba.out.h archures.h
+bcs88kcoff.o : bcs88kcoff.c libbfd.h $(BFD_H) $(SYSDEP_H) libcoff.h coff-code.h archures.h
+bfd.o : bfd.c libbfd.h $(BFD_H) $(SYSDEP_H)
+cache.o : cache.c libbfd.h $(BFD_H) $(SYSDEP_H)
+coff.o : coff.c
+cplus-dem.o : cplus-dem.c
+filemode.o : filemode.c
+icoff.o : icoff.c libbfd.h $(BFD_H) $(SYSDEP_H) libcoff.h coff-code.h archures.h
+libbfd.o : libbfd.c libbfd.h $(BFD_H) $(SYSDEP_H)
+misc.o : misc.c
+opncls.o : opncls.c libbfd.h $(BFD_H) $(SYSDEP_H)
+sunos.o : sunos.c libbfd.h $(BFD_H) $(SYSDEP_H) liba.out.h
+targets.o : targets.c libbfd.h $(BFD_H) $(SYSDEP_H)
+
+#-----------------------------------------------------------------------------
+# 'STANDARD' GNU/960 TARGETS BELOW THIS POINT
+#
+# 'VERSION' file must be present and contain a string of the form "x.y"
+#-----------------------------------------------------------------------------
+
+ver960.c: FORCE
+ rm -f ver960.c
+ echo "char ${TARG}_ver[]= \"${TARG} `cat VERSION`, `date`\";" > ver960.c
+
+
+# This target should be invoked before building a new release.
+# 'VERSION' file must be present and contain a string of the form "x.y"
+#
+roll:
+ @V=`cat VERSION` ; \
+ MAJ=`sed 's/\..*//' VERSION` ; \
+ MIN=`sed 's/.*\.//' VERSION` ; \
+ V=$$MAJ.`expr $$MIN + 1` ; \
+ rm -f VERSION ; \
+ echo $$V >VERSION ; \
+ echo Version $$V
+
+# Dummy target to force execution of dependent targets.
+#
+.force:
+FORCE:
+
+# 'G960BASE' will be defined at invocation
+install:
+ make ${TARG} OPT=-O
+
+# Target to uncomment host-specific lines in this makefile. Such lines must
+# have the following string beginning in column 1: #__<hostname>__#
+# Original Makefile is backed up as 'Makefile.old'.
+#
+# Invoke with: make make HOST=xxx
+#
+make:
+ -@if test $(HOST)x = x ; then \
+ echo 'Specify "make make HOST=???"'; \
+ exit 1; \
+ fi ; \
+ grep -s "^#The next line was generated by 'make make'" Makefile; \
+ if test $$? = 0 ; then \
+ echo "Makefile has already been processed with 'make make'";\
+ exit 1; \
+ fi ; \
+ mv -f Makefile Makefile.old; \
+ echo "#The next line was generated by 'make make'" >Makefile ; \
+ echo "HOST=$(HOST)" >>Makefile ; \
+ echo >>Makefile ; \
+ sed "s/^#__$(HOST)__#//" < Makefile.old >>Makefile
+
+Makefile: $(srcdir)/Makefile.in $(srcdir)/configure
+ (cd $(srcdir) ; ./configure -host=$(host) $(target))
diff --git a/bfd/configure b/bfd/configure
new file mode 100755
index 0000000..627867a
--- /dev/null
+++ b/bfd/configure
@@ -0,0 +1,845 @@
+#!/bin/sh
+# Do not edit this file. It is generated automatically from configure.in
+# and a configure template.
+configdirs=
+
+#!/bin/sh
+# Do not edit this file. It is generated automatically from configure.in
+# and a configure template.
+configdirs=
+
+# Configuration script template
+# Copyright (C) 1988, 1990, 1991 Free Software Foundation, Inc.
+
+#This file is part of GNU.
+
+#GNU CC is free software; you can redistribute it and/or modify
+#it under the terms of the GNU General Public License as published by
+#the Free Software Foundation; either version 1, or (at your option)
+#any later version.
+
+#GNU CC is distributed in the hope that it will be useful,
+#but WITHOUT ANY WARRANTY; without even the implied warranty of
+#MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+#GNU General Public License for more details.
+
+#You should have received a copy of the GNU General Public License
+#along with GNU CC; see the file COPYING. If not, write to
+#the Free Software Foundation, 675 Mass Ave, Cambridge, MA 02139, USA.
+
+#
+# Shell script to create proper links to machine-dependent files in
+# preparation for compiling gcc.
+#
+# Usage: configure [+srcdir=DIR] [+host=HOST] [+gas] [+nfp] TARGET
+#
+# If configure succeeds, it leaves its status in config.status.
+# If configure fails after disturbing the status quo,
+# config.status is removed.
+#
+
+progname=$0
+
+remove=rm
+hard_link=ln
+symbolic_link='ln -s'
+
+#for Test
+#remove="echo rm"
+#hard_link="echo ln"
+#symbolic_link="echo ln -s"
+
+# clear some things potentially inherited from environment.
+target=
+template=
+removing=
+norecurse=
+ansi=
+
+for arg in $*;
+do
+ case $arg in
+ -ansi | +ansi)
+ ansi=true
+ ;;
+ -template=* | +template=*)
+ template=`echo $arg | sed 's/[+-]template=//'`
+ ;;
+ -norecurse | +norecurse)
+ norecurse=true
+ ;;
+ -rm | +rm)
+ removing=$arg
+ ;;
+ -srcdir=* | +srcdir=* | +srcdi=* | +srcd=* | +src=* | +sr=* | +s=*)
+ srcdir=`echo $arg | sed 's/[+-]s[a-z]*=//'`
+ ;;
+ -host=* | +host=* | +hos=* | +ho=* | +h=*)
+ host=`echo $arg | sed 's/[+-]h[a-z]*=//'`
+ ;;
+ -languages=* | +languages=* | -languag=* | +languag=* | langua=* \
+ | +langua=* | -langu=* | +langu=* | -lang=* | +lang=* | -lan=* \
+ | +lan=* | -la=* | +la=* | -l=* | +l=*)
+ languages="$languages `echo $arg | sed 's/[+-]l[a-z]*=//'`"
+ ;;
+ -gas | +gas | +ga | +g)
+ gas=yes
+ ;;
+ -nfp | +nfp | +nf | +n)
+ nfp=yes
+ ;;
+ *)
+# Allow configure HOST TARGET
+ if [ x$host = x ] ; then host=$target ; fi
+ target=$arg
+ ;;
+ esac
+done
+
+# process host and target only if not rebuilding configure itself.
+if [ -z "$template" ]
+then
+ # Complain if an arg is missing
+ if [ x$target = x ]
+ then
+ echo "Usage: $progname [+srcdir=DIR] [+host=HOST] [+gas] [+nfp] TARGET"
+ echo -n "Where HOST and TARGET are something like "
+ echo "\`vax', \`sun3', \`encore', etc."
+ if [ -r config.status ]
+ then
+ cat config.status
+ fi
+ exit 1
+ fi
+
+ # Default other arg
+ if [ x$host = x ]
+ then
+ host=$target
+ fi
+
+ # Decode the host machine, then the target machine.
+ # For the host machine, we save the xm_file variable as host_xm_file;
+ # then we decode the target machine and forget everything else
+ # that came from the host machine.
+ for machine in $host $target; do
+
+ # Separate what the user gave into CPU/company and OS (if any).
+ basic_machine=`echo $machine | sed 's/-[^-]*$//'`
+ if [ $basic_machine != $machine ]
+ then os=`echo $machine | sed 's/[^-]*-/-/'`
+ else os=; fi
+
+ # Decode aliases for certain machine/company combinations.
+ case $basic_machine in
+ iris | iris4d)
+ basic_machine=mips/sgi
+ ;;
+ news | news800)
+ basic_machine=m68k/sony
+ ;;
+ 3b1 | 7300 | 7300/att | att-7300)
+ basic_machine=m68k/att
+ ;;
+ delta | 3300 | motorola-3300 | motorola-delta \
+ | 3300/motorola | delta/motorola)
+ basic_machine=m68k/motorola
+ ;;
+ vax/dec)
+ basic_machine=vax
+ ;;
+ balance)
+ basic_machine=ns32k/sequent
+ ;;
+ symmetry)
+ basic_machine=i386/sequent
+ ;;
+ sun2)
+ basic_machine=m68000/sun
+ ;;
+ sun3)
+ basic_machine=m68k/sun
+ ;;
+ sun4)
+ basic_machine=sparc/sun
+ ;;
+ sun386 | sun386i)
+ basic_machine=i386/sun
+ ;;
+ ps2)
+ basic_machine=i386/ibm
+ ;;
+ next)
+ basic_machine=m68k/next
+ ;;
+ hp9k3[2-9][0-9])
+ basic_machine=m68k/hp
+ ;;
+ hp9k31[0-9] | hp9k2[0-9][0-9])
+ basic_machine=m68000/hp
+ ;;
+ isi68)
+ basic_machine=m68k/isi
+ ;;
+ apollo68)
+ basic_machine=m68k/apollo
+ ;;
+ altos | altos3068)
+ basic_machine=m68k/altos
+ ;;
+ miniframe)
+ basic_machine=m68000/convergent
+ ;;
+ tower | tower-32)
+ basic_machine=m68k/ncr
+ ;;
+ news-3600 | risc-news)
+ basic_machine=mips/sony
+ ;;
+ decstation | decstation-3100 | pmax)
+ basic_machine=mips/dec
+ ;;
+ gmicro)
+ basic_machine=tron
+ ;;
+ convex-c1)
+ basic_machine=c1/convex
+ ;;
+ convex-c2)
+ basic_machine=c2/convex
+ ;;
+ esac
+
+ # Decode manufacturer-specific aliases for certain operating systems.
+
+ case $os in
+ -newsos*)
+ os=-bsd
+ ;;
+ -ultrix*)
+ os=-bsd
+ ;;
+ -dynix*)
+ os=-bsd
+ ;;
+ -ctix*)
+ os=-sysv
+ ;;
+ esac
+
+ machine=$basic_machine$os
+
+ cpu_type=
+ xm_file=
+ tm_file=
+ make_var_file=
+
+ case $machine in
+ vax | vax-bsd*) # vaxen running BSD
+ ;;
+ vax-vms | vms) # vaxen running VMS
+ cpu_type=vax
+ xm_file=xm-vms.h
+ tm_file=tm-vms.h
+ ;;
+ vax-sysv* | vaxv) # vaxen running system V
+ cpu_type=vax
+ xm_file=xm-vaxv.h
+ tm_file=tm-vaxv.h
+ ;;
+ tahoe | tahoe-bsd*) # tahoe running BSD
+ ;;
+ tahoe/harris*) # Harris tahoe, using COFF.
+ cpu_type=tahoe
+ ;;
+ i386/sequent* | i386/sequent-bsd*) # 80386 from Sequent
+ cpu_type=i386
+ xm_file=xm-i386.h
+ tm_file=tm-seq386.h
+ ;;
+ i386-mach | i386/*-mach)
+ cpu_type=i386
+ xm_file=xm-i386.h
+ tm_file=tm-i386gas.h
+ ;;
+ i386/sco | i386/sco-sysv* | i386/*-sco) # 80386 running SCO system
+ cpu_type=i386
+ xm_file=xm-i386v.h
+ tm_file=tm-i386sco.h
+ make_var_file=make-i386sco
+ ;;
+ i386/isc | i386/isc-sysv* | i386/*-isc) # 80386 running ISC system
+ cpu_type=i386
+ xm_file=xm-i386v.h
+ tm_file=tm-i386isc.h
+ make_var_file=make-i386isc
+ ;;
+ i386/ibm | i386-aix | i386/ibm-aix) # IBM PS/2 running AIX
+ cpu_type=i386
+ tm_file=tm-i386v.h
+ xm_file=xm-i386v.h
+ make_var_file=make-i386v
+ ;;
+ i386/sun*)
+ cpu_type=i386
+ xm_file=xm-sun386i.h
+ tm_file=tm-sun386i.h
+ ;;
+ i386-sysv4 | i386/*-sysv4 | i386v4) # Intel 80386's running system V.4
+ cpu_type=i386
+ xm_file=xm-i386v.h
+ make_var_file=make-i386v
+ tm_file=tm-i386v4.h
+ ;;
+ i386-sysv* | i386/*-sysv* | i386v) # Intel 80386's running system V
+ cpu_type=i386
+ xm_file=xm-i386v.h
+ make_var_file=make-i386v
+ if [ x$gas = xyes ]
+ then
+ tm_file=tm-i386gas.h
+ else
+ tm_file=tm-i386v.h
+ fi
+ ;;
+ i860 | i860-sysv* | i860/*-sysv*)
+ cpu_type=i860
+ if [ x$gas = xyes ]
+ then
+ tm_file=tm-i860g.h
+ else
+ tm_file=tm-i860.h
+ fi
+ ;;
+ i860-bsd* | i860/*-bsd*)
+ cpu_type=i860
+ if [ x$gas = xyes ]
+ then
+ tm_file=tm-i860bsdg.h
+ else
+ tm_file=tm-i860bsd.h
+ fi
+ ;;
+ sparc | sparc/* | sparc-*os4 | sparc/*-*os4)
+ cpu_type=sparc
+ tm_file=tm-sparc.h
+ ;;
+ sparc-*os3 | sparc/*-*os3)
+ cpu_type=sparc
+ tm_file=tm-sun4os3.h
+ ;;
+ m68k/next)
+ cpu_type=m68k
+ tm_file=tm-next.h
+ out_file=out-next.c
+ xm_file=xm-next.h
+ ;;
+ m68k/sun-*os3)
+ cpu_type=m68k
+ if [ x$nfp = xyes ]
+ then
+ tm_file=tm-sun3os3nf.h
+ else
+ tm_file=tm-sun3os3.h
+ fi
+ ;;
+ m68k/sun-mach)
+ cpu_type=m68k
+ tm_file=tm-sun3mach.h
+ ;;
+ m68k/sun | m68k/sun-*os4)
+ cpu_type=m68k
+ if [ x$nfp = xyes ]
+ then
+ tm_file=tm-sun3nfp.h
+ else
+ tm_file=tm-sun3.h
+ fi
+ ;;
+ m68k/hp | m68k/hp-hpux*) # HP 9000 series 300
+ cpu_type=m68k
+ xm_file=xm-hp9k320.h
+ if [ x$gas = xyes ]
+ then
+ make_var_file=make-hp9k320g
+ tm_file=tm-hp9k320g.h
+ else
+ make_var_file=make-hp9k320
+ tm_file=tm-hp9k320.h
+ fi
+ ;;
+ m68k/hp-bsd*) # HP 9000/3xx running Berkeley Unix
+ cpu_type=m68k
+ tm_file=tm-hp9k3bsd.h
+ ;;
+ m68k/isi | m68k/isi-bsd*)
+ cpu_type=m68k
+ if [ x$nfp = xyes ]
+ then
+ tm_file=tm-isi68-nfp.h
+ else
+ tm_file=tm-isi68.h
+ fi
+ ;;
+ m68k/sony | m68k/sony-bsd*)
+ xm_file=xm-m68k.h
+ cpu_type=m68k
+ if [ x$gas = xyes ]
+ then
+ tm_file=tm-newsgas.h
+ else
+ tm_file=tm-news.h
+ fi
+ ;;
+ m68k/altos | m68k/altos-sysv*) # Altos 3068
+ cpu_type=m68k
+ if [ x$gas = xyes ]
+ then
+ xm_file=xm-altos3068.h
+ tm_file=tm-altos3068.h
+ else
+ echo "The Altos is supported only with the GNU assembler" 1>&2
+ exit 1
+ fi
+ ;;
+ m68k/motorola | m68k/motorola-sysv*)
+ cpu_type=m68k
+ tm_file=tm-mot3300.h
+ xm_file=xm-mot3300.h
+ ;;
+ m68k/crds | m68k/crds-unos | m68k-unos | crds | unos)
+ cpu_type=m68k
+ xm_file=xm-crds.h
+ make_var_file=make-crds
+ tm_file=tm-crds.h
+ ;;
+ m68k/apollo)
+ cpu_type=m68k
+ make_var_file=make-apollo68
+ tm_file=tm-apollo68.h
+ ;;
+ m68k/ncr | m68k/ncr-sysv*) # NCR Tower 32 SVR3
+ cpu_type=m68k
+ tm_file=tm-tower-as.h
+ xm_file=xm-tower.h
+ ;;
+ m68000/sun | m68000/sun-*os3)
+ cpu_type=m68k
+ tm_file=tm-sun2.h
+ ;;
+ m68000/sun-*os4)
+ cpu_type=m68k
+ tm_file=tm-sun2os4.h
+ ;;
+ m68000/hp | m68000/hp-hpux*) # HP 9000 series 300
+ cpu_type=m68k
+ xm_file=xm-hp9k310.h
+ if [ x$gas = xyes ]
+ then
+ make_var_file=make-hp9k320g
+ tm_file=tm-hp9k310g.h
+ else
+ make_var_file=make-hp9k320
+ tm_file=tm-hp9k310.h
+ fi
+ ;;
+ m68000/hp-bsd*) # HP 9000/200 running BSD
+ cpu_type=m68k
+ tm_file=tm-hp9k2bsd.h
+ make_var_file=make-hp9k2bsd
+ ;;
+ m68000/att | m68000/att-sysv*)
+ cpu_type=m68k
+ xm_file=xm-3b1.h
+ if [ x$gas = xyes ]
+ then
+ tm_file=tm-3b1g.h
+ else
+ tm_file=tm-3b1.h
+ fi
+ ;;
+ m68000/convergent | m68000/convergent-sysv*)
+ cpu_type=m68k
+ xm_file=xm-3b1.h
+ tm_file=tm-ctix.h
+ ;;
+ ns32k/sequent | ns32k/sequent-bsd*)
+ cpu_type=ns32k
+ tm_file=tm-sequent.h
+ ;;
+ ns32k/encore | ns32k/encore-bsd* | encore | encore-bsd*)
+ cpu_type=ns32k
+ tm_file=tm-encore.h
+ ;;
+ ns32k-genix* | ns32k/*-genix* | genix)
+ cpu_type=ns32k
+ xm_file=xm-genix.h
+ make_var_file=make-genix
+ tm_file=tm-genix.h
+ ;;
+ merlin)
+ cpu_type=ns32k
+ ;;
+ m88k/dg | m88k/dg-dgux* | m88k-dgux*)
+ cpu_type=m88k
+ xm_file=xm-m88kdgux.h
+ make_var_file=make-m88kdgux
+ tm_file=tm-m88kdgux.h
+ ;;
+ m88k-v88r32 | m88k/*-v88r32)
+ cpu_type=m88k
+ tm_file=tm-v88r32.h
+ xm_file=xm-v88r32.h
+ ;;
+ m88k-sysv* | m88k/*-sysv*)
+ cpu_type=m88k
+ tm_file=tm-m88ksvr4.h
+ xm_file=xm-m88ksvr4.h
+ ;;
+ alliant | alliant/alliant) # Alliant FX/8
+ cpu_type=alliant
+ tm_file=tm-alliant.h
+ ;;
+ c1/convex) # Convex C1
+ if [ -r /usr/include/stdlib.h ]
+ then
+ tm_file=tm-convex1.h
+ else
+ tm_file=tm-conv1os7.h
+ fi
+ cpu_type=convex
+ ;;
+ c2/convex) # Convex C2
+ if [ -r /usr/include/stdlib.h ]
+ then
+ tm_file=tm-convex2.h
+ else
+ tm_file=tm-conv2os7.h
+ fi
+ cpu_type=convex
+ ;;
+ mips/sgi | mips/sgi-sysv*) # Mostly like a MIPS.
+ cpu_type=mips
+ tm_file=tm-iris.h
+ xm_file=xm-iris.h
+ ;;
+ mips | mips/mips) # Default MIPS environment.
+ ;;
+ mips/dec | mips/dec-bsd*) # Decstation.
+ cpu_type=mips
+ tm_file=tm-decstatn.h
+ ;;
+ mips/sony | mips/sony-bsd*) # Sony NEWS 3600 or risc/news.
+ cpu_type=mips
+ tm_file=tm-mips-news.h
+ ;;
+ mips/*-sysv* | mips-sysv*) # SYSV variant of MIPS system.
+ cpu_type=mips
+ tm_file=tm-mips-sysv.h
+ ;;
+ mips/*-bsd* | mips-bsd*) # BSD 4.3 variant of MIPS system.
+ cpu_type=mips
+ tm_file=tm-mips-bsd.h
+ ;;
+ pyramid | pyramid/* | pyramid-*)
+ cpu_type=pyr
+ tm_file=tm-pyr.h
+ ;;
+ tron | tron/*)
+ cpu_type=gmicro
+ tm_file=tm_gmicro.h
+ ;;
+ a29k-bsd* | a29k/*-bsd*)
+ cpu_type=a29k
+ tm_file=tm-a29kunix.h
+ ;;
+ i960) # Default i960 environment.
+ ;;
+ # 370)
+ # ;;
+ esac
+ if [ x$pass1done = x ]
+ then
+ if [ x$cpu_type = x ]; then cpu_type=$host; fi
+ if [ x$xm_file = x ]; then host_xm_file=xm-$cpu_type.h
+ else host_xm_file=$xm_file
+ fi
+ if [ x$make_var_file = x ]
+ then make_var_file=make-$cpu_type; fi
+ host_make_var_file=$make_var_file
+ pass1done=yes
+ fi
+ done
+
+ # Default the machine-specific variables that were not explicitly set.
+ if [ x$cpu_type = x ]
+ then cpu_type=$target; fi
+
+ if [ x$tm_file = x ]
+ then tm_file=tm-$target.h; fi
+
+ md_file=${cpu_type}.md
+
+ if [ x$out_file = x ]
+ then out_file=out-$cpu_type.c; fi
+fi
+
+#### configure.in files go here.
+### end of configure.in
+
+# are we rebuilding config itself?
+if [ -n "$template" ]
+then
+ if [ ! -r $template ]
+ then
+ echo "Can't find template ${template}."
+ exit 1
+ fi
+
+ mv configure configure.old
+ echo "#!/bin/sh" > configure
+ echo "# Do not edit this file. It is generated automatically from configure.in" >> configure
+ echo "# and a configure template." >> configure
+ echo "configdirs=" >> configure
+ echo >> configure
+
+ if [ -r configure.in ]
+ then
+ sed -e "/^####/ r configure.in" $template >> configure
+ else
+ cat $template >> configure
+ fi
+
+ chmod a+x configure
+ rm configure.old
+# echo Rebuilt configure in `pwd` from ${template}.
+ echo Rebuilt configure in `pwd`
+
+ if [ x$norecurse = x ]
+ then
+ while [ -n "$configdirs" ]
+ do
+ # set configdir to car of configdirs, configdirs to cdr of configdirs
+ set $configdirs; configdir=$1; shift; configdirs=$*
+
+ if [ "`echo ${configdir}.*`" != "${configdir}.*" ]
+ then
+ targetspecificdirs=${configdir}.*
+ else
+ targetspecificdirs=
+ fi
+
+ for i in ${configdir} ${targetspecificdirs}
+ do
+ if [ -r $i/configure ]
+ then
+ (cd $i ;
+ configure +template=${template})
+ else
+ echo No configure script in `pwd`/$i
+ fi
+ done
+ done
+ fi
+
+ exit 0
+fi
+
+# Temporarily, we support only direct subdir builds.
+hostsubdir=Host-$host
+targetsubdir=Target-$target
+
+if [ -n "$removing" ]
+then
+ rm -rf $hostsubdir/$targetsubdir
+
+ if [ -z "`(ls $hostsubdir) 2>&1 | grep Target-`" ]
+ then
+ rm -rf $hostsubdir
+ fi
+else
+ if [ ! -d $hostsubdir ] ; then mkdir $hostsubdir ; fi
+ cd $hostsubdir
+
+ if [ ! -d $targetsubdir ] ; then mkdir $targetsubdir ; fi
+ cd $targetsubdir
+
+ srcdir=../..
+
+ ## Find the source files, if location was not specified.
+ #if [ x$srcdir = x ]
+ #then
+ # srcdirdefaulted=1
+ # srcdir=.
+ # if [ ! -r ${srctrigger} ]
+ # then
+ # srcdir=..
+ # fi
+ #fi
+ #
+ #if [ ! -r ${srcdir}/${srctrigger} ]
+ #then
+ # if [ x$srcdirdefaulted = x ]
+ # then
+ # echo "$progname: Can't find ${srcname} sources in \`${srcdir}'." 1>&2
+ # else
+ # echo "$progname: Can't find ${srcname} sources in \`.' or \`..'." 1>&2
+ # fi
+ # exit 1
+ #fi
+
+
+
+ # Set up the list of links to be made.
+ # $links is the list of link names, and $files is the list of names to link to.
+
+ # Make the links.
+ while [ -n "$files" ]
+ do
+ # set file to car of files, files to cdr of files
+ set $files; file=$1; shift; files=$*
+ set $links; link=$1; shift; links=$*
+
+ if [ ! -r ${srcdir}/config/$file ]
+ then
+ echo "$progname: cannot create a link \`$link'," 1>&2
+ echo "since the file \`config/$file' does not exist." 1>&2
+ exit 1
+ fi
+
+ $remove -f $link
+ rm -f config.status
+ # Make a symlink if possible, otherwise try a hard link
+ $symbolic_link ${srcdir}/config/$file $link 2>/dev/null || $hard_link ${srcdir}/config/$file $link
+
+ if [ ! -r $link ]
+ then
+ echo "$progname: unable to link \`$link' to \`${srcdir}/config/$file'." 1>&2
+ exit 1
+ fi
+ echo "Linked \`$link' to \`${srcdir}/config/$file'."
+ done
+
+ # Install a makefile, and make it set VPATH
+ # if necessary so that the sources are found.
+ # Also change its value of srcdir.
+ # Also create a .gdbinit file which runs the one in srcdir
+ # and tells GDB to look there for source files.
+ case $srcdir in
+ .)
+ ;;
+ *)
+ echo "VPATH = ${srcdir}" > x
+ cat x ${srcdir}/Makefile.in | sed "s@^srcdir = \.@srcdir = ${srcdir}@" > Makefile.in
+ rm x
+ echo "dir ." > .gdbinit
+ echo "dir ${srcdir}" >> .gdbinit
+ echo "source ${srcdir}/.gdbinit" >> .gdbinit
+ ;;
+ esac
+
+ host_var_file=hmake-${host}
+ target_var_file=tmake-${target}
+
+ # Conditionalize the makefile for this machine.
+ if [ -f ${srcdir}/config/${host_var_file} ]
+ then
+ sed -e "/^####/ r ${srcdir}/config/${host_var_file}" Makefile.in > Makefile.tem
+ else
+ cp Makefile.in Makefile.tem
+ fi
+
+ if [ -f ${srcdir}/config/${target_var_file} ]
+ then
+ sed -e "/^####/ r ${srcdir}/config/${target_var_file}" Makefile.tem > Makefile.tem1
+ mv Makefile.tem1 Makefile.tem
+ fi
+
+ # Remove all formfeeds, since some Makes get confused by them.
+ sed "s/ //" Makefile.tem >> Makefile.tem1
+ mv Makefile.tem1 Makefile.tem
+
+ # reset SUBDIRS
+ sed "s:^SUBDIRS =.*$:SUBDIRS = ${configdirs}:" Makefile.tem > Makefile.tem1
+ mv Makefile.tem1 Makefile.tem
+
+ # reset NONSUBDIRS
+ sed "s:^NONSUBDIRS =.*$:NONSUBDIRS = ${noconfigdirs}:" Makefile.tem > Makefile.tem1
+ mv Makefile.tem1 Makefile.tem
+
+ # Delete the intermediate files
+ if [ x$srcdir != x. ] ; then rm Makefile.in ; fi
+
+ rm -f Makefile
+
+ # Define macro CROSS_COMPILE in compilation if this is a cross-compiler.
+ if [ x$host != x$target ]
+ then
+ echo "CROSS=-DCROSS_COMPILE" > Makefile
+ echo "ALL=start.encap" >> Makefile
+ else
+ echo "ALL=all.internal" > Makefile
+ fi
+
+ # set target and host
+ echo "host = $host" >> Makefile
+ echo "target = $target" >> Makefile
+
+ cat Makefile.tem >> Makefile
+ rm Makefile.tem
+
+ using=
+ if [ -f ${srcdir}/config/${host_var_file} ]
+ then
+ using=" using \"${host_var_file}\""
+ fi
+
+ if [ -f ${srcdir}/config/${target_var_file} ]
+ then
+ if [ -z "${using}" ]
+ then
+ andusing=" using \"${target_var_file}\""
+ else
+ andusing="${using} and \"${target_var_file}\""
+ fi
+ else
+ andusing=${using}
+ fi
+
+ echo "Created \"Makefile\""${andusing}.
+
+ if [ x$host = x$target ]
+ then
+ echo "Links are now set up for use with a $target." \
+ | tee ${srcdir}/config.status
+ else
+ echo "Links are now set up for host $host and target $target." \
+ | tee ${srcdir}/config.status
+ fi
+
+ cd ${srcdir}
+fi
+
+# If there are subdirectories, then recurse.
+
+if [ x$norecurse != x ] ; then exit 0 ; fi
+
+while [ -n "$configdirs" ]
+do
+ # set configdir to car of configdirs, configdirs to cdr of configdirs
+ set $configdirs; configdir=$1; shift; configdirs=$*
+
+ # check for target override
+ targetspecificdir=${configdir}.${target}
+ if [ -d ${targetspecificdir} ]
+ then
+ configdir=${targetspecificdir}
+ fi
+
+ echo Configuring ${configdir}...
+ (cd ${configdir} ;
+ configure +host=${host} ${target} ${removing}) \
+ | sed 's/^/ /'
+done
+
+exit 0
diff --git a/binutils/Makefile.in b/binutils/Makefile.in
new file mode 100644
index 0000000..fc04fc4
--- /dev/null
+++ b/binutils/Makefile.in
@@ -0,0 +1,189 @@
+### Makefile for GNU binary-file utilities
+
+#$Id$
+
+## Configuration options
+# These should be all you need set before compiling
+
+# these two should be the same program
+AR=ar
+RANLIB=ranlib
+
+# copy and strip should be the same program
+COPY=copy
+STRIP=strip
+
+# These should all be the same program too.
+SIZE=size
+NM=nm
+OBJDUMP=objdump
+
+PROGS = $(SIZE) $(COPY) $(OBJDUMP) $(NM) $(AR) $(STRIP) $(RANLIB)
+
+srcdir = .
+BASEDIR = $(srcdir)/../..
+
+# Let rich do this for now:
+LIBDIR = $(BASEDIR)/bfd/$(HOST)
+
+#__sun3__#DEFINES=-DHOST_SYS=SUN3_SYS
+#__sun3__#LDFLAGS = -Bstatic
+
+#__sun4__#DEFINES=-DHOST_SYS=SUN4_SYS
+#__sun4__#LDFLAGS = -Bstatic
+
+#__sun386i__#LDFLAGS = -Bstatic
+
+#__rs6000__#DEFINES=-Daix
+#__rs6000__#ALLOCA = alloca.o
+
+#__i386v__#ALLOCA = alloca.o
+#__i386v__#DEFINES=-DUSG
+
+INCDIR = $(BASEDIR)/include-cygnus
+
+CFLAGS = -g -I$(INCDIR) $(DEFINES)
+
+
+bindir=$(BASEDIR)/bin
+
+DISASMS = m68k-pinsn.o i960-pinsn.o sparc-pinsn.o
+#
+## Random definitions
+# Hopefully all these may be flushed once we get configuration down pat.
+
+# alloca only needed for systems which don't have it and when cc != gcc.
+# ALLOCA = alloca.o
+
+# nm tries to malloc enough space for the string table. The old GNU malloc
+# rounds this up to a power of two (e.g. 5M becomes 8M), and so it might
+# fail unnecessarily. I've also seen some Unix malloc's fail, even when
+# there is enough memory. So use the new GNU malloc.
+# MALLOC = gmalloc.o
+
+# Use the GNU getopt unless you have problems with it.
+# The IRIS version could probably benefit from being assembled with
+# libmalloc rather than the ordinary malloc.
+GNU_GETOPT = getopt.o $(ALLOCA)
+GNU_GETOPT_LONG = getopt1.o $(GNU_GETOPT)
+
+# This is supposed to become part of the standard GNU libs, whatever
+# that means.
+FILEMODE = filemode.o
+
+
+
+# Code shared by all the binutils.
+BULIBS = bucomm.o version.o
+
+ADDL_LIBS = $(GNU_GETOPT_LONG) $(MALLOC) $(FILEMODE) $(BULIBS)
+
+BFD = $(LIBDIR)/libbfd.a
+#
+## The rules
+
+all: $(ADDL_LIBS) $(PROGS)
+
+$(SIZE): $(ADDL_LIBS) size.o $(BFD)
+ $(CC) $(LDFLAGS) $(CFLAGS) -o $(SIZE) size.o $(ADDL_LIBS) $(BFD)
+
+$(COPY): $(ADDL_LIBS) copy.o $(BFD)
+ $(CC) $(LDFLAGS) $(CFLAGS) -o $(COPY) copy.o $(ADDL_LIBS) $(BFD)
+
+$(NM): $(ADDL_LIBS) nm.o $(BFD)
+ $(CC) $(LDFLAGS) $(CFLAGS) -o $(NM) nm.o $(MALLOC) $(ADDL_LIBS) $(BFD)
+
+$(OBJDUMP): $(ADDL_LIBS) size.o objdump.o $(DISASMS) $(BFD)
+ $(CC) $(LDFLAGS) $(CFLAGS) -o $(OBJDUMP) objdump.o $(DISASMS) $(ADDL_LIBS) $(BFD)
+
+$(AR): $(ADDL_LIBS) ar.o $(BFD)
+ $(CC) $(LDFLAGS) $(CFLAGS) -o $(AR) ar.o $(MALLOC) $(ADDL_LIBS) $(BFD)
+
+$(RANLIB): $(AR)
+ -rm -f $(RANLIB)
+ -ln $(AR) $(RANLIB)
+
+$(STRIP): $(COPY)
+ -rm -f $(STRIP)
+ -ln $(COPY) $(STRIP)
+
+clean:
+ -rm -f *.o *~ \#* core $(PROGS) TAGS
+
+etags tags: TAGS
+
+TAGS: .force
+ etags $(INCDIR)/*.h $(BFDSRC)/*.[hc] *.[hc]
+
+realclean: clean
+ -rm -f $(PROGS) TAGS
+
+install: $(PROGS)
+ for prog in $(PROGS); do \
+ rm -f $G960BASE/bin/$$prog-new; cp $$prog $$G960BASE/bin/$$prog-new ; \
+ done
+
+
+bucomm.o: bucomm.c
+version.o: version.c
+size.o: size.c
+copy.o: copy.c
+objdump.o: objdump.c
+m68k-pinsn.o: m68k-pinsn.c
+m68k-pinsn.o: ./m68k-opcode.h
+i960-pinsn.o: i960-pinsn.c
+sparc-pinsn.o: sparc-pinsn.c
+sparc-pinsn.o: ./sparc-opcode.h
+nm.o: nm.c
+ar.o: ar.c
+strip.o: strip.c
+
+
+#-----------------------------------------------------------------------------
+# 'STANDARD' GNU/960 TARGETS BELOW THIS POINT
+#
+# 'VERSION' file must be present and contain a string of the form "x.y"
+#-----------------------------------------------------------------------------
+
+ver960.c: FORCE
+ rm -f ver960.c
+ echo "char ${TARG}_ver[]= \"${TARG} `cat VERSION`, `date`\";" > ver960.c
+
+
+# Dummy target to force execution of dependent targets.
+#
+.force:
+FORCE:
+
+# Target to uncomment host-specific lines in this makefile. Such lines must
+# have the following string beginning in column 1: #__<hostname>__#
+# Original Makefile is backed up as 'Makefile.old'.
+#
+# Invoke with: make make HOST=xxx
+#
+make:
+ -@if test $(HOST)x = x ; then \
+ echo 'Specify "make make HOST=???"'; \
+ exit 1; \
+ fi ; \
+ grep -s "^#The next line was generated by 'make make'" Makefile; \
+ if test $$? = 0 ; then \
+ echo "Makefile has already been processed with 'make make'";\
+ exit 1; \
+ fi ; \
+ mv -f Makefile Makefile.old; \
+ echo "#The next line was generated by 'make make'" >Makefile ; \
+ echo "HOST=$(HOST)" >>Makefile ; \
+ echo >>Makefile ; \
+ sed "s/^#__$(HOST)__#//" < Makefile.old >>Makefile
+
+#
+
+Makefile: $(srcdir)/Makefile.in $(srcdir)/configure
+ (cd $(srcdir) ; ./configure -host=$(host) $(target))
+
+### Local Variables: ***
+### mode:fundamental ***
+### page-delimiter: "^# " ***
+### End: ***
+### end of file
diff --git a/binutils/configure b/binutils/configure
new file mode 100755
index 0000000..627867a
--- /dev/null
+++ b/binutils/configure
@@ -0,0 +1,845 @@
+#!/bin/sh
+# Do not edit this file. It is generated automatically from configure.in
+# and a configure template.
+configdirs=
+
+#!/bin/sh
+# Do not edit this file. It is generated automatically from configure.in
+# and a configure template.
+configdirs=
+
+# Configuration script template
+# Copyright (C) 1988, 1990, 1991 Free Software Foundation, Inc.
+
+#This file is part of GNU.
+
+#GNU CC is free software; you can redistribute it and/or modify
+#it under the terms of the GNU General Public License as published by
+#the Free Software Foundation; either version 1, or (at your option)
+#any later version.
+
+#GNU CC is distributed in the hope that it will be useful,
+#but WITHOUT ANY WARRANTY; without even the implied warranty of
+#MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+#GNU General Public License for more details.
+
+#You should have received a copy of the GNU General Public License
+#along with GNU CC; see the file COPYING. If not, write to
+#the Free Software Foundation, 675 Mass Ave, Cambridge, MA 02139, USA.
+
+#
+# Shell script to create proper links to machine-dependent files in
+# preparation for compiling gcc.
+#
+# Usage: configure [+srcdir=DIR] [+host=HOST] [+gas] [+nfp] TARGET
+#
+# If configure succeeds, it leaves its status in config.status.
+# If configure fails after disturbing the status quo,
+# config.status is removed.
+#
+
+progname=$0
+
+remove=rm
+hard_link=ln
+symbolic_link='ln -s'
+
+#for Test
+#remove="echo rm"
+#hard_link="echo ln"
+#symbolic_link="echo ln -s"
+
+# clear some things potentially inherited from environment.
+target=
+template=
+removing=
+norecurse=
+ansi=
+
+for arg in $*;
+do
+ case $arg in
+ -ansi | +ansi)
+ ansi=true
+ ;;
+ -template=* | +template=*)
+ template=`echo $arg | sed 's/[+-]template=//'`
+ ;;
+ -norecurse | +norecurse)
+ norecurse=true
+ ;;
+ -rm | +rm)
+ removing=$arg
+ ;;
+ -srcdir=* | +srcdir=* | +srcdi=* | +srcd=* | +src=* | +sr=* | +s=*)
+ srcdir=`echo $arg | sed 's/[+-]s[a-z]*=//'`
+ ;;
+ -host=* | +host=* | +hos=* | +ho=* | +h=*)
+ host=`echo $arg | sed 's/[+-]h[a-z]*=//'`
+ ;;
+ -languages=* | +languages=* | -languag=* | +languag=* | langua=* \
+ | +langua=* | -langu=* | +langu=* | -lang=* | +lang=* | -lan=* \
+ | +lan=* | -la=* | +la=* | -l=* | +l=*)
+ languages="$languages `echo $arg | sed 's/[+-]l[a-z]*=//'`"
+ ;;
+ -gas | +gas | +ga | +g)
+ gas=yes
+ ;;
+ -nfp | +nfp | +nf | +n)
+ nfp=yes
+ ;;
+ *)
+# Allow configure HOST TARGET
+ if [ x$host = x ] ; then host=$target ; fi
+ target=$arg
+ ;;
+ esac
+done
+
+# process host and target only if not rebuilding configure itself.
+if [ -z "$template" ]
+then
+ # Complain if an arg is missing
+ if [ x$target = x ]
+ then
+ echo "Usage: $progname [+srcdir=DIR] [+host=HOST] [+gas] [+nfp] TARGET"
+ echo -n "Where HOST and TARGET are something like "
+ echo "\`vax', \`sun3', \`encore', etc."
+ if [ -r config.status ]
+ then
+ cat config.status
+ fi
+ exit 1
+ fi
+
+ # Default other arg
+ if [ x$host = x ]
+ then
+ host=$target
+ fi
+
+ # Decode the host machine, then the target machine.
+ # For the host machine, we save the xm_file variable as host_xm_file;
+ # then we decode the target machine and forget everything else
+ # that came from the host machine.
+ for machine in $host $target; do
+
+ # Separate what the user gave into CPU/company and OS (if any).
+ basic_machine=`echo $machine | sed 's/-[^-]*$//'`
+ if [ $basic_machine != $machine ]
+ then os=`echo $machine | sed 's/[^-]*-/-/'`
+ else os=; fi
+
+ # Decode aliases for certain machine/company combinations.
+ case $basic_machine in
+ iris | iris4d)
+ basic_machine=mips/sgi
+ ;;
+ news | news800)
+ basic_machine=m68k/sony
+ ;;
+ 3b1 | 7300 | 7300/att | att-7300)
+ basic_machine=m68k/att
+ ;;
+ delta | 3300 | motorola-3300 | motorola-delta \
+ | 3300/motorola | delta/motorola)
+ basic_machine=m68k/motorola
+ ;;
+ vax/dec)
+ basic_machine=vax
+ ;;
+ balance)
+ basic_machine=ns32k/sequent
+ ;;
+ symmetry)
+ basic_machine=i386/sequent
+ ;;
+ sun2)
+ basic_machine=m68000/sun
+ ;;
+ sun3)
+ basic_machine=m68k/sun
+ ;;
+ sun4)
+ basic_machine=sparc/sun
+ ;;
+ sun386 | sun386i)
+ basic_machine=i386/sun
+ ;;
+ ps2)
+ basic_machine=i386/ibm
+ ;;
+ next)
+ basic_machine=m68k/next
+ ;;
+ hp9k3[2-9][0-9])
+ basic_machine=m68k/hp
+ ;;
+ hp9k31[0-9] | hp9k2[0-9][0-9])
+ basic_machine=m68000/hp
+ ;;
+ isi68)
+ basic_machine=m68k/isi
+ ;;
+ apollo68)
+ basic_machine=m68k/apollo
+ ;;
+ altos | altos3068)
+ basic_machine=m68k/altos
+ ;;
+ miniframe)
+ basic_machine=m68000/convergent
+ ;;
+ tower | tower-32)
+ basic_machine=m68k/ncr
+ ;;
+ news-3600 | risc-news)
+ basic_machine=mips/sony
+ ;;
+ decstation | decstation-3100 | pmax)
+ basic_machine=mips/dec
+ ;;
+ gmicro)
+ basic_machine=tron
+ ;;
+ convex-c1)
+ basic_machine=c1/convex
+ ;;
+ convex-c2)
+ basic_machine=c2/convex
+ ;;
+ esac
+
+ # Decode manufacturer-specific aliases for certain operating systems.
+
+ case $os in
+ -newsos*)
+ os=-bsd
+ ;;
+ -ultrix*)
+ os=-bsd
+ ;;
+ -dynix*)
+ os=-bsd
+ ;;
+ -ctix*)
+ os=-sysv
+ ;;
+ esac
+
+ machine=$basic_machine$os
+
+ cpu_type=
+ xm_file=
+ tm_file=
+ make_var_file=
+
+ case $machine in
+ vax | vax-bsd*) # vaxen running BSD
+ ;;
+ vax-vms | vms) # vaxen running VMS
+ cpu_type=vax
+ xm_file=xm-vms.h
+ tm_file=tm-vms.h
+ ;;
+ vax-sysv* | vaxv) # vaxen running system V
+ cpu_type=vax
+ xm_file=xm-vaxv.h
+ tm_file=tm-vaxv.h
+ ;;
+ tahoe | tahoe-bsd*) # tahoe running BSD
+ ;;
+ tahoe/harris*) # Harris tahoe, using COFF.
+ cpu_type=tahoe
+ ;;
+ i386/sequent* | i386/sequent-bsd*) # 80386 from Sequent
+ cpu_type=i386
+ xm_file=xm-i386.h
+ tm_file=tm-seq386.h
+ ;;
+ i386-mach | i386/*-mach)
+ cpu_type=i386
+ xm_file=xm-i386.h
+ tm_file=tm-i386gas.h
+ ;;
+ i386/sco | i386/sco-sysv* | i386/*-sco) # 80386 running SCO system
+ cpu_type=i386
+ xm_file=xm-i386v.h
+ tm_file=tm-i386sco.h
+ make_var_file=make-i386sco
+ ;;
+ i386/isc | i386/isc-sysv* | i386/*-isc) # 80386 running ISC system
+ cpu_type=i386
+ xm_file=xm-i386v.h
+ tm_file=tm-i386isc.h
+ make_var_file=make-i386isc
+ ;;
+ i386/ibm | i386-aix | i386/ibm-aix) # IBM PS/2 running AIX
+ cpu_type=i386
+ tm_file=tm-i386v.h
+ xm_file=xm-i386v.h
+ make_var_file=make-i386v
+ ;;
+ i386/sun*)
+ cpu_type=i386
+ xm_file=xm-sun386i.h
+ tm_file=tm-sun386i.h
+ ;;
+ i386-sysv4 | i386/*-sysv4 | i386v4) # Intel 80386's running system V.4
+ cpu_type=i386
+ xm_file=xm-i386v.h
+ make_var_file=make-i386v
+ tm_file=tm-i386v4.h
+ ;;
+ i386-sysv* | i386/*-sysv* | i386v) # Intel 80386's running system V
+ cpu_type=i386
+ xm_file=xm-i386v.h
+ make_var_file=make-i386v
+ if [ x$gas = xyes ]
+ then
+ tm_file=tm-i386gas.h
+ else
+ tm_file=tm-i386v.h
+ fi
+ ;;
+ i860 | i860-sysv* | i860/*-sysv*)
+ cpu_type=i860
+ if [ x$gas = xyes ]
+ then
+ tm_file=tm-i860g.h
+ else
+ tm_file=tm-i860.h
+ fi
+ ;;
+ i860-bsd* | i860/*-bsd*)
+ cpu_type=i860
+ if [ x$gas = xyes ]
+ then
+ tm_file=tm-i860bsdg.h
+ else
+ tm_file=tm-i860bsd.h
+ fi
+ ;;
+ sparc | sparc/* | sparc-*os4 | sparc/*-*os4)
+ cpu_type=sparc
+ tm_file=tm-sparc.h
+ ;;
+ sparc-*os3 | sparc/*-*os3)
+ cpu_type=sparc
+ tm_file=tm-sun4os3.h
+ ;;
+ m68k/next)
+ cpu_type=m68k
+ tm_file=tm-next.h
+ out_file=out-next.c
+ xm_file=xm-next.h
+ ;;
+ m68k/sun-*os3)
+ cpu_type=m68k
+ if [ x$nfp = xyes ]
+ then
+ tm_file=tm-sun3os3nf.h
+ else
+ tm_file=tm-sun3os3.h
+ fi
+ ;;
+ m68k/sun-mach)
+ cpu_type=m68k
+ tm_file=tm-sun3mach.h
+ ;;
+ m68k/sun | m68k/sun-*os4)
+ cpu_type=m68k
+ if [ x$nfp = xyes ]
+ then
+ tm_file=tm-sun3nfp.h
+ else
+ tm_file=tm-sun3.h
+ fi
+ ;;
+ m68k/hp | m68k/hp-hpux*) # HP 9000 series 300
+ cpu_type=m68k
+ xm_file=xm-hp9k320.h
+ if [ x$gas = xyes ]
+ then
+ make_var_file=make-hp9k320g
+ tm_file=tm-hp9k320g.h
+ else
+ make_var_file=make-hp9k320
+ tm_file=tm-hp9k320.h
+ fi
+ ;;
+ m68k/hp-bsd*) # HP 9000/3xx running Berkeley Unix
+ cpu_type=m68k
+ tm_file=tm-hp9k3bsd.h
+ ;;
+ m68k/isi | m68k/isi-bsd*)
+ cpu_type=m68k
+ if [ x$nfp = xyes ]
+ then
+ tm_file=tm-isi68-nfp.h
+ else
+ tm_file=tm-isi68.h
+ fi
+ ;;
+ m68k/sony | m68k/sony-bsd*)
+ xm_file=xm-m68k.h
+ cpu_type=m68k
+ if [ x$gas = xyes ]
+ then
+ tm_file=tm-newsgas.h
+ else
+ tm_file=tm-news.h
+ fi
+ ;;
+ m68k/altos | m68k/altos-sysv*) # Altos 3068
+ cpu_type=m68k
+ if [ x$gas = xyes ]
+ then
+ xm_file=xm-altos3068.h
+ tm_file=tm-altos3068.h
+ else
+ echo "The Altos is supported only with the GNU assembler" 1>&2
+ exit 1
+ fi
+ ;;
+ m68k/motorola | m68k/motorola-sysv*)
+ cpu_type=m68k
+ tm_file=tm-mot3300.h
+ xm_file=xm-mot3300.h
+ ;;
+ m68k/crds | m68k/crds-unos | m68k-unos | crds | unos)
+ cpu_type=m68k
+ xm_file=xm-crds.h
+ make_var_file=make-crds
+ tm_file=tm-crds.h
+ ;;
+ m68k/apollo)
+ cpu_type=m68k
+ make_var_file=make-apollo68
+ tm_file=tm-apollo68.h
+ ;;
+ m68k/ncr | m68k/ncr-sysv*) # NCR Tower 32 SVR3
+ cpu_type=m68k
+ tm_file=tm-tower-as.h
+ xm_file=xm-tower.h
+ ;;
+ m68000/sun | m68000/sun-*os3)
+ cpu_type=m68k
+ tm_file=tm-sun2.h
+ ;;
+ m68000/sun-*os4)
+ cpu_type=m68k
+ tm_file=tm-sun2os4.h
+ ;;
+ m68000/hp | m68000/hp-hpux*) # HP 9000 series 300
+ cpu_type=m68k
+ xm_file=xm-hp9k310.h
+ if [ x$gas = xyes ]
+ then
+ make_var_file=make-hp9k320g
+ tm_file=tm-hp9k310g.h
+ else
+ make_var_file=make-hp9k320
+ tm_file=tm-hp9k310.h
+ fi
+ ;;
+ m68000/hp-bsd*) # HP 9000/200 running BSD
+ cpu_type=m68k
+ tm_file=tm-hp9k2bsd.h
+ make_var_file=make-hp9k2bsd
+ ;;
+ m68000/att | m68000/att-sysv*)
+ cpu_type=m68k
+ xm_file=xm-3b1.h
+ if [ x$gas = xyes ]
+ then
+ tm_file=tm-3b1g.h
+ else
+ tm_file=tm-3b1.h
+ fi
+ ;;
+ m68000/convergent | m68000/convergent-sysv*)
+ cpu_type=m68k
+ xm_file=xm-3b1.h
+ tm_file=tm-ctix.h
+ ;;
+ ns32k/sequent | ns32k/sequent-bsd*)
+ cpu_type=ns32k
+ tm_file=tm-sequent.h
+ ;;
+ ns32k/encore | ns32k/encore-bsd* | encore | encore-bsd*)
+ cpu_type=ns32k
+ tm_file=tm-encore.h
+ ;;
+ ns32k-genix* | ns32k/*-genix* | genix)
+ cpu_type=ns32k
+ xm_file=xm-genix.h
+ make_var_file=make-genix
+ tm_file=tm-genix.h
+ ;;
+ merlin)
+ cpu_type=ns32k
+ ;;
+ m88k/dg | m88k/dg-dgux* | m88k-dgux*)
+ cpu_type=m88k
+ xm_file=xm-m88kdgux.h
+ make_var_file=make-m88kdgux
+ tm_file=tm-m88kdgux.h
+ ;;
+ m88k-v88r32 | m88k/*-v88r32)
+ cpu_type=m88k
+ tm_file=tm-v88r32.h
+ xm_file=xm-v88r32.h
+ ;;
+ m88k-sysv* | m88k/*-sysv*)
+ cpu_type=m88k
+ tm_file=tm-m88ksvr4.h
+ xm_file=xm-m88ksvr4.h
+ ;;
+ alliant | alliant/alliant) # Alliant FX/8
+ cpu_type=alliant
+ tm_file=tm-alliant.h
+ ;;
+ c1/convex) # Convex C1
+ if [ -r /usr/include/stdlib.h ]
+ then
+ tm_file=tm-convex1.h
+ else
+ tm_file=tm-conv1os7.h
+ fi
+ cpu_type=convex
+ ;;
+ c2/convex) # Convex C2
+ if [ -r /usr/include/stdlib.h ]
+ then
+ tm_file=tm-convex2.h
+ else
+ tm_file=tm-conv2os7.h
+ fi
+ cpu_type=convex
+ ;;
+ mips/sgi | mips/sgi-sysv*) # Mostly like a MIPS.
+ cpu_type=mips
+ tm_file=tm-iris.h
+ xm_file=xm-iris.h
+ ;;
+ mips | mips/mips) # Default MIPS environment.
+ ;;
+ mips/dec | mips/dec-bsd*) # Decstation.
+ cpu_type=mips
+ tm_file=tm-decstatn.h
+ ;;
+ mips/sony | mips/sony-bsd*) # Sony NEWS 3600 or risc/news.
+ cpu_type=mips
+ tm_file=tm-mips-news.h
+ ;;
+ mips/*-sysv* | mips-sysv*) # SYSV variant of MIPS system.
+ cpu_type=mips
+ tm_file=tm-mips-sysv.h
+ ;;
+ mips/*-bsd* | mips-bsd*) # BSD 4.3 variant of MIPS system.
+ cpu_type=mips
+ tm_file=tm-mips-bsd.h
+ ;;
+ pyramid | pyramid/* | pyramid-*)
+ cpu_type=pyr
+ tm_file=tm-pyr.h
+ ;;
+ tron | tron/*)
+ cpu_type=gmicro
+ tm_file=tm_gmicro.h
+ ;;
+ a29k-bsd* | a29k/*-bsd*)
+ cpu_type=a29k
+ tm_file=tm-a29kunix.h
+ ;;
+ i960) # Default i960 environment.
+ ;;
+ # 370)
+ # ;;
+ esac
+ if [ x$pass1done = x ]
+ then
+ if [ x$cpu_type = x ]; then cpu_type=$host; fi
+ if [ x$xm_file = x ]; then host_xm_file=xm-$cpu_type.h
+ else host_xm_file=$xm_file
+ fi
+ if [ x$make_var_file = x ]
+ then make_var_file=make-$cpu_type; fi
+ host_make_var_file=$make_var_file
+ pass1done=yes
+ fi
+ done
+
+ # Default the machine-specific variables that were not explicitly set.
+ if [ x$cpu_type = x ]
+ then cpu_type=$target; fi
+
+ if [ x$tm_file = x ]
+ then tm_file=tm-$target.h; fi
+
+ md_file=${cpu_type}.md
+
+ if [ x$out_file = x ]
+ then out_file=out-$cpu_type.c; fi
+fi
+
+#### configure.in files go here.
+### end of configure.in
+
+# are we rebuilding config itself?
+if [ -n "$template" ]
+then
+ if [ ! -r $template ]
+ then
+ echo "Can't find template ${template}."
+ exit 1
+ fi
+
+ mv configure configure.old
+ echo "#!/bin/sh" > configure
+ echo "# Do not edit this file. It is generated automatically from configure.in" >> configure
+ echo "# and a configure template." >> configure
+ echo "configdirs=" >> configure
+ echo >> configure
+
+ if [ -r configure.in ]
+ then
+ sed -e "/^####/ r configure.in" $template >> configure
+ else
+ cat $template >> configure
+ fi
+
+ chmod a+x configure
+ rm configure.old
+# echo Rebuilt configure in `pwd` from ${template}.
+ echo Rebuilt configure in `pwd`
+
+ if [ x$norecurse = x ]
+ then
+ while [ -n "$configdirs" ]
+ do
+ # set configdir to car of configdirs, configdirs to cdr of configdirs
+ set $configdirs; configdir=$1; shift; configdirs=$*
+
+ if [ "`echo ${configdir}.*`" != "${configdir}.*" ]
+ then
+ targetspecificdirs=${configdir}.*
+ else
+ targetspecificdirs=
+ fi
+
+ for i in ${configdir} ${targetspecificdirs}
+ do
+ if [ -r $i/configure ]
+ then
+ (cd $i ;
+ configure +template=${template})
+ else
+ echo No configure script in `pwd`/$i
+ fi
+ done
+ done
+ fi
+
+ exit 0
+fi
+
+# Temporarily, we support only direct subdir builds.
+hostsubdir=Host-$host
+targetsubdir=Target-$target
+
+if [ -n "$removing" ]
+then
+ rm -rf $hostsubdir/$targetsubdir
+
+ if [ -z "`(ls $hostsubdir) 2>&1 | grep Target-`" ]
+ then
+ rm -rf $hostsubdir
+ fi
+else
+ if [ ! -d $hostsubdir ] ; then mkdir $hostsubdir ; fi
+ cd $hostsubdir
+
+ if [ ! -d $targetsubdir ] ; then mkdir $targetsubdir ; fi
+ cd $targetsubdir
+
+ srcdir=../..
+
+ ## Find the source files, if location was not specified.
+ #if [ x$srcdir = x ]
+ #then
+ # srcdirdefaulted=1
+ # srcdir=.
+ # if [ ! -r ${srctrigger} ]
+ # then
+ # srcdir=..
+ # fi
+ #fi
+ #
+ #if [ ! -r ${srcdir}/${srctrigger} ]
+ #then
+ # if [ x$srcdirdefaulted = x ]
+ # then
+ # echo "$progname: Can't find ${srcname} sources in \`${srcdir}'." 1>&2
+ # else
+ # echo "$progname: Can't find ${srcname} sources in \`.' or \`..'." 1>&2
+ # fi
+ # exit 1
+ #fi
+
+
+
+ # Set up the list of links to be made.
+ # $links is the list of link names, and $files is the list of names to link to.
+
+ # Make the links.
+ while [ -n "$files" ]
+ do
+ # set file to car of files, files to cdr of files
+ set $files; file=$1; shift; files=$*
+ set $links; link=$1; shift; links=$*
+
+ if [ ! -r ${srcdir}/config/$file ]
+ then
+ echo "$progname: cannot create a link \`$link'," 1>&2
+ echo "since the file \`config/$file' does not exist." 1>&2
+ exit 1
+ fi
+
+ $remove -f $link
+ rm -f config.status
+ # Make a symlink if possible, otherwise try a hard link
+ $symbolic_link ${srcdir}/config/$file $link 2>/dev/null || $hard_link ${srcdir}/config/$file $link
+
+ if [ ! -r $link ]
+ then
+ echo "$progname: unable to link \`$link' to \`${srcdir}/config/$file'." 1>&2
+ exit 1
+ fi
+ echo "Linked \`$link' to \`${srcdir}/config/$file'."
+ done
+
+ # Install a makefile, and make it set VPATH
+ # if necessary so that the sources are found.
+ # Also change its value of srcdir.
+ # Also create a .gdbinit file which runs the one in srcdir
+ # and tells GDB to look there for source files.
+ case $srcdir in
+ .)
+ ;;
+ *)
+ echo "VPATH = ${srcdir}" > x
+ cat x ${srcdir}/Makefile.in | sed "s@^srcdir = \.@srcdir = ${srcdir}@" > Makefile.in
+ rm x
+ echo "dir ." > .gdbinit
+ echo "dir ${srcdir}" >> .gdbinit
+ echo "source ${srcdir}/.gdbinit" >> .gdbinit
+ ;;
+ esac
+
+ host_var_file=hmake-${host}
+ target_var_file=tmake-${target}
+
+ # Conditionalize the makefile for this machine.
+ if [ -f ${srcdir}/config/${host_var_file} ]
+ then
+ sed -e "/^####/ r ${srcdir}/config/${host_var_file}" Makefile.in > Makefile.tem
+ else
+ cp Makefile.in Makefile.tem
+ fi
+
+ if [ -f ${srcdir}/config/${target_var_file} ]
+ then
+ sed -e "/^####/ r ${srcdir}/config/${target_var_file}" Makefile.tem > Makefile.tem1
+ mv Makefile.tem1 Makefile.tem
+ fi
+
+ # Remove all formfeeds, since some Makes get confused by them.
+ sed "s/ //" Makefile.tem >> Makefile.tem1
+ mv Makefile.tem1 Makefile.tem
+
+ # reset SUBDIRS
+ sed "s:^SUBDIRS =.*$:SUBDIRS = ${configdirs}:" Makefile.tem > Makefile.tem1
+ mv Makefile.tem1 Makefile.tem
+
+ # reset NONSUBDIRS
+ sed "s:^NONSUBDIRS =.*$:NONSUBDIRS = ${noconfigdirs}:" Makefile.tem > Makefile.tem1
+ mv Makefile.tem1 Makefile.tem
+
+ # Delete the intermediate files
+ if [ x$srcdir != x. ] ; then rm Makefile.in ; fi
+
+ rm -f Makefile
+
+ # Define macro CROSS_COMPILE in compilation if this is a cross-compiler.
+ if [ x$host != x$target ]
+ then
+ echo "CROSS=-DCROSS_COMPILE" > Makefile
+ echo "ALL=start.encap" >> Makefile
+ else
+ echo "ALL=all.internal" > Makefile
+ fi
+
+ # set target and host
+ echo "host = $host" >> Makefile
+ echo "target = $target" >> Makefile
+
+ cat Makefile.tem >> Makefile
+ rm Makefile.tem
+
+ using=
+ if [ -f ${srcdir}/config/${host_var_file} ]
+ then
+ using=" using \"${host_var_file}\""
+ fi
+
+ if [ -f ${srcdir}/config/${target_var_file} ]
+ then
+ if [ -z "${using}" ]
+ then
+ andusing=" using \"${target_var_file}\""
+ else
+ andusing="${using} and \"${target_var_file}\""
+ fi
+ else
+ andusing=${using}
+ fi
+
+ echo "Created \"Makefile\""${andusing}.
+
+ if [ x$host = x$target ]
+ then
+ echo "Links are now set up for use with a $target." \
+ | tee ${srcdir}/config.status
+ else
+ echo "Links are now set up for host $host and target $target." \
+ | tee ${srcdir}/config.status
+ fi
+
+ cd ${srcdir}
+fi
+
+# If there are subdirectories, then recurse.
+
+if [ x$norecurse != x ] ; then exit 0 ; fi
+
+while [ -n "$configdirs" ]
+do
+ # set configdir to car of configdirs, configdirs to cdr of configdirs
+ set $configdirs; configdir=$1; shift; configdirs=$*
+
+ # check for target override
+ targetspecificdir=${configdir}.${target}
+ if [ -d ${targetspecificdir} ]
+ then
+ configdir=${targetspecificdir}
+ fi
+
+ echo Configuring ${configdir}...
+ (cd ${configdir} ;
+ configure +host=${host} ${target} ${removing}) \
+ | sed 's/^/ /'
+done
+
+exit 0
generated by cgit v1.1 at 2024-12-30 13:07:04 +0000