diff options
| -rw-r--r-- | gdb/testsuite/ChangeLog | 4 | ||||
| -rw-r--r-- | gdb/testsuite/gdb.base/help.exp | 494 |
2 files changed, 251 insertions, 247 deletions
diff --git a/gdb/testsuite/ChangeLog b/gdb/testsuite/ChangeLog index 08956e3..3c1b328 100644 --- a/gdb/testsuite/ChangeLog +++ b/gdb/testsuite/ChangeLog @@ -1,3 +1,7 @@ +2002-03-25 Michael Snyder <msnyder@redhat.com> + + * gdb.base/help.exp: Clean up unnecessary wild cards in regexps. + 2002-03-25 Fred Fish <fnf@redhat.com> * gdb.base/list.exp: This test works on remote targets so remove diff --git a/gdb/testsuite/gdb.base/help.exp b/gdb/testsuite/gdb.base/help.exp index 9347f78..1b1a406 100644 --- a/gdb/testsuite/gdb.base/help.exp +++ b/gdb/testsuite/gdb.base/help.exp @@ -35,533 +35,533 @@ gdb_test "set height 400" "" "test set height" # use a larger expect input buffer for long help outputs. # test help add-symbol-file -gdb_test "help add-symbol-file" "Usage: add-symbol-file FILE ADDR .-s <SECT> <SECT_ADDR> -s <SECT> <SECT_ADDR> ....*\[\r\n\]+Load the symbols from FILE, assuming FILE has been dynamically loaded..*\[\r\n\]+ADDR is the starting address of the file's text..*\[\r\n\]+The optional arguments are section-name section-address pairs and.*\[\r\n\]+should be specified if the data and bss segments are not contiguous.*\[\r\n\]+with the text. SECT is a section name to be loaded at SECT_ADDR." "help add-symbol-file" +gdb_test "help add-symbol-file" "Usage: add-symbol-file FILE ADDR \\\[-s <SECT> <SECT_ADDR> -s <SECT> <SECT_ADDR> \.\.\.\\\]\[\r\n\]+Load the symbols from FILE, assuming FILE has been dynamically loaded\.\[\r\n\]+ADDR is the starting address of the file's text\.\[\r\n\]+The optional arguments are section-name section-address pairs and\[\r\n\]+should be specified if the data and bss segments are not contiguous\[\r\n\]+with the text\. SECT is a section name to be loaded at SECT_ADDR\." "help add-symbol-file" # test help aliases -gdb_test "help aliases" "Aliases of other commands..*\[\r\n\]+List of commands\:.*\[\r\n\]+Type \"help\" followed by command name for full documentation..*\[\r\n\]+Command name abbreviations are allowed if unambiguous." "help aliases" -gdb_test "help attach" "Attach to a process or file outside of GDB..*\[\r\n\]+This command attaches to another target, of the same type as your last.*\[\r\n\]+\"target\" command .\"info files\" will show your target stack.*\[\r\n\]+The command may take as argument a process id or a device file..*\[\r\n\]+For a process id, you must have permission to send the process a signal,.*\[\r\n\]+and it must have the same effective uid as the debugger..*\[\r\n\]+When using \"attach\" with a process id, the debugger finds the.*\[\r\n\]+program running in the process, looking first in the current working.*\[\r\n\]+directory, or .if not found there. using the source file search path.*\[\r\n\]+\\(see the \"directory\" command\\). You can also use the \"file\" command.*\[\r\n\]+to specify the program, and to load its symbol table." "help attach" +gdb_test "help aliases" "Aliases of other commands\.\[\r\n\]+List of commands\:.*\[\r\n\]+Type \"help\" followed by command name for full documentation\.\[\r\n\]+Command name abbreviations are allowed if unambiguous\." "help aliases" +gdb_test "help attach" "Attach to a process or file outside of GDB\.\[\r\n\]+This command attaches to another target, of the same type as your last\[\r\n\]+\"target\" command \\(\"info files\" will show your target stack\\)\.\[\r\n\]+The command may take as argument a process id or a device file\.\[\r\n\]+For a process id, you must have permission to send the process a signal,\[\r\n\]+and it must have the same effective uid as the debugger\.\[\r\n\]+When using \"attach\" with a process id, the debugger finds the\[\r\n\]+program running in the process, looking first in the current working\[\r\n\]+directory, or \\(if not found there\\) using the source file search path\[\r\n\]+\\(see the \"directory\" command\\)\. You can also use the \"file\" command\[\r\n\]+to specify the program, and to load its symbol table\." "help attach" # test help breakpoint "b" abbreviation -gdb_test "help b" "Set breakpoint at specified line or function..*\[\r\n\]+Argument may be line number, function name, or \"\[*\]\" and an address..*\[\r\n\]+If line number is specified, break at start of code for that line..*\[\r\n\]+If function is specified, break at start of code for that function..*\[\r\n\]+If an address is specified, break at that exact address..*\[\r\n\]+With no arg, uses current execution address of selected stack frame..*\[\r\n\]+This is useful for breaking on return to a stack frame..*\[\r\n\]+Multiple breakpoints at one place are permitted, and useful if conditional..*\[\r\n\]+Do \"help breakpoints\" for info on other commands dealing with breakpoints." "help breakpoint \"b\" abbreviation" +gdb_test "help b" "Set breakpoint at specified line or function\.\[\r\n\]+Argument may be line number, function name, or \"\[*\]\" and an address\.\[\r\n\]+If line number is specified, break at start of code for that line\.\[\r\n\]+If function is specified, break at start of code for that function\.\[\r\n\]+If an address is specified, break at that exact address\.\[\r\n\]+With no arg, uses current execution address of selected stack frame\.\[\r\n\]+This is useful for breaking on return to a stack frame\.\[\r\n\]+Multiple breakpoints at one place are permitted, and useful if conditional\.\[\r\n\]+Do \"help breakpoints\" for info on other commands dealing with breakpoints\." "help breakpoint \"b\" abbreviation" # test help breakpoint "br" abbreviation -gdb_test "help br" "Set breakpoint at specified line or function..*\[\r\n\]+Argument may be line number, function name, or \"\[*\]\" and an address..*\[\r\n\]+If line number is specified, break at start of code for that line..*\[\r\n\]+If function is specified, break at start of code for that function..*\[\r\n\]+If an address is specified, break at that exact address..*\[\r\n\]+With no arg, uses current execution address of selected stack frame..*\[\r\n\]+This is useful for breaking on return to a stack frame..*\[\r\n\]+Multiple breakpoints at one place are permitted, and useful if conditional..*\[\r\n\]+Do \"help breakpoints\" for info on other commands dealing with breakpoints." "help breakpoint \"br\" abbreviation" +gdb_test "help br" "Set breakpoint at specified line or function\.\[\r\n\]+Argument may be line number, function name, or \"\[*\]\" and an address\.\[\r\n\]+If line number is specified, break at start of code for that line\.\[\r\n\]+If function is specified, break at start of code for that function\.\[\r\n\]+If an address is specified, break at that exact address\.\[\r\n\]+With no arg, uses current execution address of selected stack frame\.\[\r\n\]+This is useful for breaking on return to a stack frame\.\[\r\n\]+Multiple breakpoints at one place are permitted, and useful if conditional\.\[\r\n\]+Do \"help breakpoints\" for info on other commands dealing with breakpoints\." "help breakpoint \"br\" abbreviation" # test help breakpoint "bre" abbreviation -gdb_test "help bre" "Set breakpoint at specified line or function..*\[\r\n\]+Argument may be line number, function name, or \"\[*\]\" and an address..*\[\r\n\]+If line number is specified, break at start of code for that line..*\[\r\n\]+If function is specified, break at start of code for that function..*\[\r\n\]+If an address is specified, break at that exact address..*\[\r\n\]+With no arg, uses current execution address of selected stack frame..*\[\r\n\]+This is useful for breaking on return to a stack frame..*\[\r\n\]+Multiple breakpoints at one place are permitted, and useful if conditional..*\[\r\n\]+Do \"help breakpoints\" for info on other commands dealing with breakpoints." "help breakpoint \"bre\" abbreviation" +gdb_test "help bre" "Set breakpoint at specified line or function\.\[\r\n\]+Argument may be line number, function name, or \"\[*\]\" and an address\.\[\r\n\]+If line number is specified, break at start of code for that line\.\[\r\n\]+If function is specified, break at start of code for that function\.\[\r\n\]+If an address is specified, break at that exact address\.\[\r\n\]+With no arg, uses current execution address of selected stack frame\.\[\r\n\]+This is useful for breaking on return to a stack frame\.\[\r\n\]+Multiple breakpoints at one place are permitted, and useful if conditional\.\[\r\n\]+Do \"help breakpoints\" for info on other commands dealing with breakpoints\." "help breakpoint \"bre\" abbreviation" # test help breakpoint "brea" abbreviation -gdb_test "help brea" "Set breakpoint at specified line or function..*\[\r\n\]+Argument may be line number, function name, or \"\[*\]\" and an address..*\[\r\n\]+If line number is specified, break at start of code for that line..*\[\r\n\]+If function is specified, break at start of code for that function..*\[\r\n\]+If an address is specified, break at that exact address..*\[\r\n\]+With no arg, uses current execution address of selected stack frame..*\[\r\n\]+This is useful for breaking on return to a stack frame..*\[\r\n\]+Multiple breakpoints at one place are permitted, and useful if conditional..*\[\r\n\]+Do \"help breakpoints\" for info on other commands dealing with breakpoints." "help breakpoint \"brea\" abbreviation" +gdb_test "help brea" "Set breakpoint at specified line or function\.\[\r\n\]+Argument may be line number, function name, or \"\[*\]\" and an address\.\[\r\n\]+If line number is specified, break at start of code for that line\.\[\r\n\]+If function is specified, break at start of code for that function\.\[\r\n\]+If an address is specified, break at that exact address\.\[\r\n\]+With no arg, uses current execution address of selected stack frame\.\[\r\n\]+This is useful for breaking on return to a stack frame\.\[\r\n\]+Multiple breakpoints at one place are permitted, and useful if conditional\.\[\r\n\]+Do \"help breakpoints\" for info on other commands dealing with breakpoints\." "help breakpoint \"brea\" abbreviation" # test help breakpoint "break" abbreviation -gdb_test "help break" "Set breakpoint at specified line or function..*\[\r\n\]+Argument may be line number, function name, or \"\[*\]\" and an address..*\[\r\n\]+If line number is specified, break at start of code for that line..*\[\r\n\]+If function is specified, break at start of code for that function..*\[\r\n\]+If an address is specified, break at that exact address..*\[\r\n\]+With no arg, uses current execution address of selected stack frame..*\[\r\n\]+This is useful for breaking on return to a stack frame..*\[\r\n\]+Multiple breakpoints at one place are permitted, and useful if conditional..*\[\r\n\]+Do \"help breakpoints\" for info on other commands dealing with breakpoints." "help breakpoint \"break\" abbreviation" +gdb_test "help break" "Set breakpoint at specified line or function\.\[\r\n\]+Argument may be line number, function name, or \"\[*\]\" and an address\.\[\r\n\]+If line number is specified, break at start of code for that line\.\[\r\n\]+If function is specified, break at start of code for that function\.\[\r\n\]+If an address is specified, break at that exact address\.\[\r\n\]+With no arg, uses current execution address of selected stack frame\.\[\r\n\]+This is useful for breaking on return to a stack frame\.\[\r\n\]+Multiple breakpoints at one place are permitted, and useful if conditional\.\[\r\n\]+Do \"help breakpoints\" for info on other commands dealing with breakpoints\." "help breakpoint \"break\" abbreviation" # test help breakpoints -gdb_test "help breakpoints" "Making program stop at certain points..*\[\r\n\]+List of commands\:.*\[\r\n\]+awatch -- Set a watchpoint for an expression.*\[\r\n\]+break -- Set breakpoint at specified line or function.*\[\r\n\]+catch -- Set catchpoints to catch events.*\[\r\n\]+clear -- Clear breakpoint at specified line or function.*\[\r\n\]+commands -- Set commands to be executed when a breakpoint is hit.*\[\r\n\]+condition -- Specify breakpoint number N to break only if COND is true.*\[\r\n\]+delete -- Delete some breakpoints or auto-display expressions.*\[\r\n\]+disable -- Disable some breakpoints.*\[\r\n\]+enable -- Enable some breakpoints.*\[\r\n\]+hbreak -- Set a hardware assisted breakpoint.*\[\r\n\]+ignore -- Set ignore-count of breakpoint number N to COUNT.*\[\r\n\]+rwatch -- Set a read watchpoint for an expression.*\[\r\n\]+tbreak -- Set a temporary breakpoint.*\[\r\n\]+tcatch -- Set temporary catchpoints to catch events.*\[\r\n\]+thbreak -- Set a temporary hardware assisted breakpoint.*\[\r\n\]+watch -- Set a watchpoint for an expression.*\[\r\n\]+Type \"help\" followed by command name for full documentation..*\[\r\n\]+Command name abbreviations are allowed if unambiguous." "help breakpoints" +gdb_test "help breakpoints" "Making program stop at certain points\.\[\r\n\]+List of commands:\[\r\n\]+awatch -- Set a watchpoint for an expression\[\r\n\]+break -- Set breakpoint at specified line or function\[\r\n\]+catch -- Set catchpoints to catch events\[\r\n\]+clear -- Clear breakpoint at specified line or function\[\r\n\]+commands -- Set commands to be executed when a breakpoint is hit\[\r\n\]+condition -- Specify breakpoint number N to break only if COND is true\[\r\n\]+delete -- Delete some breakpoints or auto-display expressions\[\r\n\]+disable -- Disable some breakpoints\[\r\n\]+enable -- Enable some breakpoints\[\r\n\]+hbreak -- Set a hardware assisted breakpoint\[\r\n\]+ignore -- Set ignore-count of breakpoint number N to COUNT\[\r\n\]+rbreak -- Set a breakpoint for all functions matching REGEXP\[\r\n\]+rwatch -- Set a read watchpoint for an expression\[\r\n\]+tbreak -- Set a temporary breakpoint\[\r\n\]+tcatch -- Set temporary catchpoints to catch events\[\r\n\]+thbreak -- Set a temporary hardware assisted breakpoint\[\r\n\]+watch -- Set a watchpoint for an expression\[\r\n\]+Type \"help\" followed by command name for full documentation\.\[\r\n\]+Command name abbreviations are allowed if unambiguous\." "help breakpoints" # test help backtrace "bt" abbreviation -gdb_test "help bt" "Print backtrace of all stack frames, or innermost COUNT frames..*\[\r\n\]+With a negative argument, print outermost -COUNT frames..*\[\r\n\]+Use of the 'full' qualifier also prints the values of the local variables." "help backtrace \"bt\" abbreviation" +gdb_test "help bt" "Print backtrace of all stack frames, or innermost COUNT frames\.\[\r\n\]+With a negative argument, print outermost -COUNT frames\.\[\r\n\]+Use of the 'full' qualifier also prints the values of the local variables\." "help backtrace \"bt\" abbreviation" # test help backtrace -gdb_test "help backtrace" "Print backtrace of all stack frames, or innermost COUNT frames..*\[\r\n\]+With a negative argument, print outermost -COUNT frames..*\[\r\n\]+Use of the 'full' qualifier also prints the values of the local variables." "help backtrace" +gdb_test "help backtrace" "Print backtrace of all stack frames, or innermost COUNT frames\.\[\r\n\]+With a negative argument, print outermost -COUNT frames\.\[\r\n\]+Use of the 'full' qualifier also prints the values of the local variables\." "help backtrace" # test help continue "c" abbreviation -gdb_test "help c" "Continue program being debugged.*" "help continue \"c\" abbreviation" +gdb_test "help c" "Continue program being debugged.*" "help continue \"c\" abbreviation" # test help continue -gdb_test "help continue" "Continue program being debugged.*" "help continue" +gdb_test "help continue" "Continue program being debugged.*" "help continue" # test help call -gdb_test "help call" "Call a function.*" "help call" +gdb_test "help call" "Call a function.*" "help call" # test help catch gdb_test "help catch" "Set catchpoints to catch events.*Raised signals may be caught:.*catch signal.*all signals.*catch signal.*signame.*a particular signal.*Raised exceptions may be caught:.*catch throw.*all exceptions, when thrown.*catch throw.*exceptname.*a particular exception, when thrown.*catch catch.*all exceptions, when caught.*catch catch.*exceptname.*a particular exception, when caught.*Thread or process events may be caught:.*catch thread_start.*any threads, just after creation.*catch thread_exit.*any threads, just before expiration.*catch thread_join.*any threads, just after joins.*catch start.*any processes, just after creation.*catch exit.*any processes, just before expiration.*catch fork.*calls to fork.*catch vfork.*calls to vfork.*catch exec.*calls to exec.*Dynamically.linked library events may be caught:.*catch load.*loads of any library.*catch load.*libname.*loads of a particular library.*catch unload.*unloads of any library.*catch unload.*libname.*unloads of a particular library.*The act of your program's execution stopping may also be caught:.*catch stop.*Do.*help set follow-fork-mode.*for info on debugging your program.*after a fork or vfork is caught.*Do.*help breakpoints.*for info on other commands dealing with breakpoints." "help catch" # test help cd -gdb_test "help cd" "Set working directory to DIR for debugger and program being debugged..*\[\r\n\]+The change does not take effect for the program being debugged.*\[\r\n\]+until the next time it is started." "help cd" +gdb_test "help cd" "Set working directory to DIR for debugger and program being debugged\.\[\r\n\]+The change does not take effect for the program being debugged\[\r\n\]+until the next time it is started\." "help cd" # test help clear -gdb_test "help clear" "Clear breakpoint at specified line or function.*\[\r\n\]+Argument may be line number, function name, or .* and an address.*\[\r\n\]+If line number is specified, all breakpoints in that line are cleared.*\[\r\n\]+If function is specified, breakpoints at beginning of function are cleared.*\[\r\n\]+If an address is specified, breakpoints at that address are cleared.*\[\r\n\]+With no argument, clears all breakpoints in the line that the selected frame.*\[\r\n\]+is executing in..*\[\r\n\]+See also the \"delete\" command which clears breakpoints by number." "help clear" +gdb_test "help clear" "Clear breakpoint at specified line or function\.\[\r\n\]+Argument may be line number, function name, or \"\\*\" and an address\.\[\r\n\]+If line number is specified, all breakpoints in that line are cleared\.\[\r\n\]+If function is specified, breakpoints at beginning of function are cleared\.\[\r\n\]+If an address is specified, breakpoints at that address are cleared\.\[\r\n\]+With no argument, clears all breakpoints in the line that the selected frame\[\r\n\]+is executing in\.\[\r\n\]+See also the \"delete\" command which clears breakpoints by number\." "help clear" # test help commands -gdb_test "help commands" "Set commands to be executed when a breakpoint is hit..*\[\r\n\]+Give breakpoint number as argument after \"commands\"..*\[\r\n\]+With no argument, the targeted breakpoint is the last one set..*\[\r\n\]+The commands themselves follow starting on the next line..*\[\r\n\]+Type a line containing \"end\" to indicate the end of them..*\[\r\n\]+Give \"silent\" as the first line to make the breakpoint silent;.*\[\r\n\]+then no output is printed when it is hit, except what the commands print." "help commands" +gdb_test "help commands" "Set commands to be executed when a breakpoint is hit\.\[\r\n\]+Give breakpoint number as argument after \"commands\"\.\[\r\n\]+With no argument, the targeted breakpoint is the last one set\.\[\r\n\]+The commands themselves follow starting on the next line\.\[\r\n\]+Type a line containing \"end\" to indicate the end of them\.\[\r\n\]+Give \"silent\" as the first line to make the breakpoint silent;\[\r\n\]+then no output is printed when it is hit, except what the commands print\." "help commands" # test help condition -gdb_test "help condition" "Specify breakpoint number N to break only if COND is true..*\[\r\n\]+Usage is `condition N COND', where N is an integer and COND is an.*\[\r\n\]+expression to be evaluated whenever breakpoint N is reached. " "help condition" +gdb_test "help condition" "Specify breakpoint number N to break only if COND is true\.\[\r\n\]+Usage is `condition N COND', where N is an integer and COND is an\[\r\n\]+expression to be evaluated whenever breakpoint N is reached. " "help condition" # test help core-file -gdb_test "help core-file" "Use FILE as core dump for examining memory and registers..*\[\r\n\]+No arg means have no core file. This command has been superseded by the.*\[\r\n\]+`target core' and `detach' commands." "help core-file" +gdb_test "help core-file" "Use FILE as core dump for examining memory and registers\.\[\r\n\]+No arg means have no core file\. This command has been superseded by the\[\r\n\]+`target core' and `detach' commands\." "help core-file" # test help delete "d" abbreviation -gdb_test "help d" "Delete some breakpoints or auto-display expressions..*\[\r\n\]+Arguments are breakpoint numbers with spaces in between..*\[\r\n\]+To delete all breakpoints, give no argument..*\[\r\n\]+Also a prefix command for deletion of other GDB objects..*\[\r\n\]+The \"unset\" command is also an alias for \"delete\"..*\[\r\n\]+List of delete subcommands:.*\[\r\n\]+delete breakpoints -- Delete some breakpoints or auto-display expressions.*\[\r\n\]+delete display -- Cancel some expressions to be displayed when program stops.*\[\r\n\]+Type \"help delete\" followed by delete subcommand name for full documentation..*\[\r\n\]+Command name abbreviations are allowed if unambiguous." "help delete \"d\" abbreviation" +gdb_test "help d" "Delete some breakpoints or auto-display expressions\.\[\r\n\]+Arguments are breakpoint numbers with spaces in between\.\[\r\n\]+To delete all breakpoints, give no argument\.\[\r\n\]+Also a prefix command for deletion of other GDB objects\.\[\r\n\]+The \"unset\" command is also an alias for \"delete\"\.\[\r\n\]+List of delete subcommands:\[\r\n\]+delete breakpoints -- Delete some breakpoints or auto-display expressions\[\r\n\]+delete display -- Cancel some expressions to be displayed when program stops\[\r\n\]+delete mem -- Delete memory region\[\r\n\]+delete tracepoints -- Delete specified tracepoints\[\r\n\]+Type \"help delete\" followed by delete subcommand name for full documentation\.\[\r\n\]+Command name abbreviations are allowed if unambiguous\." "help delete \"d\" abbreviation" # test help delete -gdb_test "help delete" "Delete some breakpoints or auto-display expressions..*\[\r\n\]+Arguments are breakpoint numbers with spaces in between..*\[\r\n\]+To delete all breakpoints, give no argument..*\[\r\n\]+Also a prefix command for deletion of other GDB objects..*\[\r\n\]+The \"unset\" command is also an alias for \"delete\"..*\[\r\n\]+List of delete subcommands:.*\[\r\n\]+delete breakpoints -- Delete some breakpoints or auto-display expressions.*\[\r\n\]+delete display -- Cancel some expressions to be displayed when program stops.*\[\r\n\]+Type \"help delete\" followed by delete subcommand name for full documentation..*\[\r\n\]+Command name abbreviations are allowed if unambiguous." "help delete" +gdb_test "help delete" "Delete some breakpoints or auto-display expressions\.\[\r\n\]+Arguments are breakpoint numbers with spaces in between\.\[\r\n\]+To delete all breakpoints, give no argument\.\[\r\n\]+Also a prefix command for deletion of other GDB objects\.\[\r\n\]+The \"unset\" command is also an alias for \"delete\"\.\[\r\n\]+List of delete subcommands:\[\r\n\]+delete breakpoints -- Delete some breakpoints or auto-display expressions\[\r\n\]+delete display -- Cancel some expressions to be displayed when program stops\[\r\n\]+delete mem -- Delete memory region\[\r\n\]+delete tracepoints -- Delete specified tracepoints\[\r\n\]+Type \"help delete\" followed by delete subcommand name for full documentation\.\[\r\n\]+Command name abbreviations are allowed if unambiguous\." "help delete" # test help data -gdb_test "help data" ".*\[\r\n\]+Examining data..*\[\r\n\]+List of commands:.*\[\r\n\]+Type \"help\" followed by command name for full documentation..*\[\r\n\]+Command name abbreviations are allowed if unambiguous." "help data" +gdb_test "help data" "Examining data\.\[\r\n\]+List of commands:.*\[\r\n\]+Type \"help\" followed by command name for full documentation\.\[\r\n\]+Command name abbreviations are allowed if unambiguous\." "help data" # test help define -gdb_test "help define" "Define a new command.*" "help define" +gdb_test "help define" "Define a new command.*" "help define" # test help delete breakpoints -gdb_test "help delete breakpoints" "Delete some breakpoints or auto-display expressions..*\[\r\n\]+Arguments are breakpoint numbers with spaces in between..*\[\r\n\]+To delete all breakpoints, give no argument..*\[\r\n\]+This command may be abbreviated \"delete\"." "help delete breakpoints" +gdb_test "help delete breakpoints" "Delete some breakpoints or auto-display expressions\.\[\r\n\]+Arguments are breakpoint numbers with spaces in between\.\[\r\n\]+To delete all breakpoints, give no argument\.\[\r\n\]+This command may be abbreviated \"delete\"\." "help delete breakpoints" # test help delete display -gdb_test "help delete display" "Cancel some expressions to be displayed when program stops..*\[\r\n\]+Arguments are the code numbers of the expressions to stop displaying..*\[\r\n\]+No argument means cancel all automatic-display expressions..*\[\r\n\]+Do \"info display\" to see current list of code numbers." "help delete display" +gdb_test "help delete display" "Cancel some expressions to be displayed when program stops\.\[\r\n\]+Arguments are the code numbers of the expressions to stop displaying\.\[\r\n\]+No argument means cancel all automatic-display expressions\.\[\r\n\]+Do \"info display\" to see current list of code numbers\." "help delete display" # test help detach -gdb_test "help detach" "Detach a process or file previously attached.\[\r\n\]+If a process, it is no longer traced, and it continues its execution.\[ \r\n\]+If\[ \r\n\]+you were debugging a file, the file is closed and gdb no longer accesses it." "help detach" +gdb_test "help detach" "Detach a process or file previously attached\.\[\r\n\]+If a process, it is no longer traced, and it continues its execution\.\[ \r\n\]+If\[ \r\n\]+you were debugging a file, the file is closed and gdb no longer accesses it\." "help detach" # test help directory -gdb_test "help directory" "Add directory DIR to beginning of search path for source files..*\[\r\n\]+Forget cached info on source file locations and line positions..*\[\r\n\]+DIR can also be .cwd for the current working directory, or .cdir for the.*\[\r\n\]+directory in which the source file was compiled into object code..*\[\r\n\]+With no argument, reset the search path to .cdir:.cwd, the default." "help directory" +gdb_test "help directory" "Add directory DIR to beginning of search path for source files\.\[\r\n\]+Forget cached info on source file locations and line positions\.\[\r\n\]+DIR can also be \\\$cwd for the current working directory, or \\\$cdir for the\[\r\n\]+directory in which the source file was compiled into object code\.\[\r\n\]+With no argument, reset the search path to \\\$cdir:\\\$cwd, the default\." "help directory" # test help disable "dis" abbreviation -gdb_test "help dis" "Disable some breakpoints..*\[\r\n\]+Arguments are breakpoint numbers with spaces in between..*\[\r\n\]+To disable all breakpoints, give no argument..*\[\r\n\]+A disabled breakpoint is not forgotten, but has no effect until reenabled..*\[\r\n\]+List of disable subcommands:.*\[\r\n\]+disable breakpoints -- Disable some breakpoints.*\[\r\n\]+disable display -- Disable some expressions to be displayed when program stops.*\[\r\n\]+Type \"help disable\" followed by disable subcommand name for full documentation..*\[\r\n\]+Command name abbreviations are allowed if unambiguous." "help disable \"dis\" abbreviation" +gdb_test "help dis" "Disable some breakpoints\.\[\r\n\]+Arguments are breakpoint numbers with spaces in between\.\[\r\n\]+To disable all breakpoints, give no argument\.\[\r\n\]+A disabled breakpoint is not forgotten, but has no effect until reenabled\.\[\r\n\]+List of disable subcommands:\[\r\n\]+disable breakpoints -- Disable some breakpoints\[\r\n\]+disable display -- Disable some expressions to be displayed when program stops\[\r\n\]+disable mem -- Disable memory region\[\r\n\]+disable tracepoints -- Disable specified tracepoints\[\r\n\]+Type \"help disable\" followed by disable subcommand name for full documentation\.\[\r\n\]+Command name abbreviations are allowed if unambiguous\." "help disable \"dis\" abbreviation" # test help disable "disa" abbreviation -gdb_test "help disa" "Disable some breakpoints..*\[\r\n\]+Arguments are breakpoint numbers with spaces in between..*\[\r\n\]+To disable all breakpoints, give no argument..*\[\r\n\]+A disabled breakpoint is not forgotten, but has no effect until reenabled..*\[\r\n\]+List of disable subcommands:.*\[\r\n\]+disable breakpoints -- Disable some breakpoints.*\[\r\n\]+disable display -- Disable some expressions to be displayed when program stops.*\[\r\n\]+Type \"help disable\" followed by disable subcommand name for full documentation..*\[\r\n\]+Command name abbreviations are allowed if unambiguous." "help disable \"disa\" abbreviation" +gdb_test "help disa" "Disable some breakpoints\.\[\r\n\]+Arguments are breakpoint numbers with spaces in between\.\[\r\n\]+To disable all breakpoints, give no argument\.\[\r\n\]+A disabled breakpoint is not forgotten, but has no effect until reenabled\.\[\r\n\]+List of disable subcommands:\[\r\n\]+disable breakpoints -- Disable some breakpoints\[\r\n\]+disable display -- Disable some expressions to be displayed when program stops\[\r\n\]+disable mem -- Disable memory region\[\r\n\]+disable tracepoints -- Disable specified tracepoints\[\r\n\]+Type \"help disable\" followed by disable subcommand name for full documentation\.\[\r\n\]+Command name abbreviations are allowed if unambiguous\." "help disable \"disa\" abbreviation" # test help disable -gdb_test "help disable" "Disable some breakpoints..*\[\r\n\]+Arguments are breakpoint numbers with spaces in between..*\[\r\n\]+To disable all breakpoints, give no argument..*\[\r\n\]+A disabled breakpoint is not forgotten, but has no effect until reenabled..*\[\r\n\]+List of disable subcommands:.*\[\r\n\]+disable breakpoints -- Disable some breakpoints.*\[\r\n\]+disable display -- Disable some expressions to be displayed when program stops.*\[\r\n\]+Type \"help disable\" followed by disable subcommand name for full documentation..*\[\r\n\]+Command name abbreviations are allowed if unambiguous." "help disable" +gdb_test "help disable" "Disable some breakpoints\.\[\r\n\]+Arguments are breakpoint numbers with spaces in between\.\[\r\n\]+To disable all breakpoints, give no argument\.\[\r\n\]+A disabled breakpoint is not forgotten, but has no effect until reenabled\.\[\r\n\]+List of disable subcommands:\[\r\n\]+disable breakpoints -- Disable some breakpoints\[\r\n\]+disable display -- Disable some expressions to be displayed when program stops\[\r\n\]+disable mem -- Disable memory region\[\r\n\]+disable tracepoints -- Disable specified tracepoints\[\r\n\]+Type \"help disable\" followed by disable subcommand name for full documentation\.\[\r\n\]+Command name abbreviations are allowed if unambiguous\." "help disable" # test help disable breakpoints -gdb_test "help disable breakpoints" "Disable some breakpoints..*\[\r\n\]+Arguments are breakpoint numbers with spaces in between..*\[\r\n\]+To disable all breakpoints, give no argument..*\[\r\n\]+A disabled breakpoint is not forgotten, but has no effect until reenabled..*\[\r\n\]+This command may be abbreviated \"disable\"." "help disable breakpoints" +gdb_test "help disable breakpoints" "Disable some breakpoints\.\[\r\n\]+Arguments are breakpoint numbers with spaces in between\.\[\r\n\]+To disable all breakpoints, give no argument\.\[\r\n\]+A disabled breakpoint is not forgotten, but has no effect until reenabled\.\[\r\n\]+This command may be abbreviated \"disable\"." "help disable breakpoints" # test help disable display -gdb_test "help disable display" "Disable some expressions to be displayed when program stops..*\[\r\n\]+Arguments are the code numbers of the expressions to stop displaying..*\[\r\n\]+No argument means disable all automatic-display expressions..*\[\r\n\]+Do \"info display\" to see current list of code numbers." "help disable display" +gdb_test "help disable display" "Disable some expressions to be displayed when program stops\.\[\r\n\]+Arguments are the code numbers of the expressions to stop displaying\.\[\r\n\]+No argument means disable all automatic-display expressions\.\[\r\n\]+Do \"info display\" to see current list of code numbers\." "help disable display" # test help disassemble -gdb_test "help disassemble" "Disassemble a specified section of memory..*\[\r\n\]+Default is the function surrounding the pc of the selected frame..*\[\r\n\]+With a single argument, the function surrounding that address is dumped..*\[\r\n\]+Two arguments are taken as a range of memory to dump." "help disassemble" +gdb_test "help disassemble" "Disassemble a specified section of memory\.\[\r\n\]+Default is the function surrounding the pc of the selected frame\.\[\r\n\]+With a single argument, the function surrounding that address is dumped\.\[\r\n\]+Two arguments are taken as a range of memory to dump\." "help disassemble" # test help display -gdb_test "help display" "Print value of expression EXP each time the program stops..*\[\r\n\]+/FMT may be used before EXP as in the \"print\" command..*\[\r\n\]+/FMT \"i\" or \"s\" or including a size-letter is allowed,.*\[\r\n\]+as in the \"x\" command, and then EXP is used to get the address to examine.*\[\r\n\]+and examining is done as in the \"x\" command..*\[\r\n\]+With no argument, display all currently requested auto-display expressions..*\[\r\n\]+Use \"undisplay\" to cancel display requests previously made." "help display" +gdb_test "help display" "Print value of expression EXP each time the program stops\.\[\r\n\]+/FMT may be used before EXP as in the \"print\" command\.\[\r\n\]+/FMT \"i\" or \"s\" or including a size-letter is allowed,\[\r\n\]+as in the \"x\" command, and then EXP is used to get the address to examine\[\r\n\]+and examining is done as in the \"x\" command\.\[\r\n\]+With no argument, display all currently requested auto-display expressions\.\[\r\n\]+Use \"undisplay\" to cancel display requests previously made\." "help display" # test help do -gdb_test "help do" "Select and print stack frame called by this one..*\[\r\n\]+An argument says how many frames down to go." "help do" +gdb_test "help do" "Select and print stack frame called by this one\.\[\r\n\]+An argument says how many frames down to go\." "help do" # test help document -gdb_test "help document" "Document a user-defined command..*\[\r\n\]+Give command name as argument. Give documentation on following lines..*\[\r\n\]+End with a line of just \"end\"." "help document" +gdb_test "help document" "Document a user-defined command\.\[\r\n\]+Give command name as argument\. Give documentation on following lines\.\[\r\n\]+End with a line of just \"end\"\." "help document" # test help down -gdb_test "help down" "Select and print stack frame called by this one..*\[\r\n\]+An argument says how many frames down to go." "help down" +gdb_test "help down" "Select and print stack frame called by this one\.\[\r\n\]+An argument says how many frames down to go\." "help down" # test help down-silently -gdb_test "help down-silently" "Same as the `down' command, but does not print anything..*\[\r\n\]+This is useful in command scripts." "help down-silently" +gdb_test "help down-silently" "Same as the `down' command, but does not print anything\.\[\r\n\]+This is useful in command scripts\." "help down-silently" # this command was removed from GDB 4.5.8 # test help dump-me #send_gdb "help dump-me" -# -re "Get fatal error; make debugger dump its core." +# -re "Get fatal error; make debugger dump its core\." # # } # test help echo -gdb_test "help echo" "Print a constant string. Give string as argument..*\[\r\n\]+C escape sequences may be used in the argument..*\[\r\n\]+No newline is added at the end of the argument;.*\[\r\n\]+use \".n\" if you want a newline to be printed..*\[\r\n\]+Since leading and trailing whitespace are ignored in command arguments,.*\[\r\n\]+if you want to print some you must use \".\" before leading whitespace.*\[\r\n\]+to be printed or after trailing whitespace." "help echo" +gdb_test "help echo" "Print a constant string\. Give string as argument\.\[\r\n\]+C escape sequences may be used in the argument\.\[\r\n\]+No newline is added at the end of the argument;\[\r\n\]+use \"\\\\n\" if you want a newline to be printed\.\[\r\n\]+Since leading and trailing whitespace are ignored in command arguments,\[\r\n\]+if you want to print some you must use \"\\\\\" before leading whitespace\[\r\n\]+to be printed or after trailing whitespace\." "help echo" # test help enable breakpoints delete -gdb_test "help enable breakpoints delete" "Enable breakpoints and delete when hit. Give breakpoint numbers..*\[\r\n\]+If a breakpoint is hit while enabled in this fashion, it is deleted." "help enable breakpoints delete" +gdb_test "help enable breakpoints delete" "Enable breakpoints and delete when hit\. Give breakpoint numbers\.\[\r\n\]+If a breakpoint is hit while enabled in this fashion, it is deleted\." "help enable breakpoints delete" # test help enable breakpoints once -gdb_test "help enable breakpoints once" "Enable breakpoints for one hit..*" "help enable breakpoints once" +gdb_test "help enable breakpoints once" "Enable breakpoints for one hit.*" "help enable breakpoints once" # test help enable breakpoints -gdb_test "help enable breakpoints" "Enable some breakpoints..*\[\r\n\]+Give breakpoint numbers .separated by spaces. as arguments..*\[\r\n\]+This is used to cancel the effect of the \"disable\" command..*\[\r\n\]+May be abbreviated to simply \"enable\"..*.*\[\r\n\]+List of enable breakpoints subcommands:.*\[\r\n\]+enable breakpoints delete -- Enable breakpoints and delete when hit.*\[\r\n\]+enable breakpoints once -- Enable breakpoints for one hit.*\[\r\n\]+Type \"help enable breakpoints\" followed by enable breakpoints subcommand name for full documentation..*\[\r\n\]+Command name abbreviations are allowed if unambiguous." "help enable breakpoints" +gdb_test "help enable breakpoints" "Enable some breakpoints\.\[\r\n\]+Give breakpoint numbers \\(separated by spaces\\) as arguments\.\[\r\n\]+This is used to cancel the effect of the \"disable\" command\.\[\r\n\]+May be abbreviated to simply \"enable\"\.\[\r\n\]+List of enable breakpoints subcommands:\[\r\n\]+enable breakpoints delete -- Enable breakpoints and delete when hit\[\r\n\]+enable breakpoints once -- Enable breakpoints for one hit\[\r\n\]+Type \"help enable breakpoints\" followed by enable breakpoints subcommand name for full documentation\.\[\r\n\]+Command name abbreviations are allowed if unambiguous\." "help enable breakpoints" # test help enable delete -gdb_test "help enable delete" "Enable breakpoints and delete when hit. Give breakpoint numbers..*\[\r\n\]+If a breakpoint is hit while enabled in this fashion, it is deleted." "help enable delete" +gdb_test "help enable delete" "Enable breakpoints and delete when hit\. Give breakpoint numbers\.\[\r\n\]+If a breakpoint is hit while enabled in this fashion, it is deleted\." "help enable delete" # test help enable display -gdb_test "help enable display" "Enable some expressions to be displayed when program stops..*\[\r\n\]+Arguments are the code numbers of the expressions to resume displaying..*\[\r\n\]+No argument means enable all automatic-display expressions..*\[\r\n\]+Do \"info display\" to see current list of code numbers." "help enable display" +gdb_test "help enable display" "Enable some expressions to be displayed when program stops\.\[\r\n\]+Arguments are the code numbers of the expressions to resume displaying\.\[\r\n\]+No argument means enable all automatic-display expressions\.\[\r\n\]+Do \"info display\" to see current list of code numbers\." "help enable display" # test help enable once -gdb_test "help enable once" "Enable breakpoints for one hit.*" "help enable once" +gdb_test "help enable once" "Enable breakpoints for one hit.*" "help enable once" # test help enable -gdb_test "help enable" "Enable some breakpoints..*\[\r\n\]+Give breakpoint numbers .separated by spaces. as arguments..*\[\r\n\]+With no subcommand, breakpoints are enabled until you command otherwise..*\[\r\n\]+This is used to cancel the effect of the \"disable\" command..*\[\r\n\]+With a subcommand you can enable temporarily..*\[\r\n\]+List of enable subcommands:.*\[\r\n\]+enable delete -- Enable breakpoints and delete when hit.*\[\r\n\]+enable display -- Enable some expressions to be displayed when program stops.*\[\r\n\]+enable once -- Enable breakpoints for one hit.*\[\r\n\]+Type \"help enable\" followed by enable subcommand name for full documentation..*\[\r\n\]+Command name abbreviations are allowed if unambiguous." "help enable" +gdb_test "help enable" "Enable some breakpoints\.\[\r\n\]+Give breakpoint numbers \\(separated by spaces\\) as arguments\.\[\r\n\]+With no subcommand, breakpoints are enabled until you command otherwise\.\[\r\n\]+This is used to cancel the effect of the \"disable\" command\.\[\r\n\]+With a subcommand you can enable temporarily\.\[\r\n\]+List of enable subcommands:\[\r\n\]+enable delete -- Enable breakpoints and delete when hit\[\r\n\]+enable display -- Enable some expressions to be displayed when program stops\[\r\n\]+enable mem -- Enable memory region\[\r\n\]+enable once -- Enable breakpoints for one hit\[\r\n\]+enable tracepoints -- Enable specified tracepoints\[\r\n\]+Type \"help enable\" followed by enable subcommand name for full documentation\.\[\r\n\]+Command name abbreviations are allowed if unambiguous\." "help enable" # test help exec-file -gdb_test "help exec-file" "Use FILE as program for getting contents of pure memory..*\[\r\n\]+If FILE cannot be found as specified, your execution directory path.*\[\r\n\]+is searched for a command of that name..*\[\r\n\]+No arg means have no executable file." "help exec-file" +gdb_test "help exec-file" "Use FILE as program for getting contents of pure memory\.\[\r\n\]+If FILE cannot be found as specified, your execution directory path\[\r\n\]+is searched for a command of that name\.\[\r\n\]+No arg means have no executable file\." "help exec-file" # test help frame "f" abbreviation -gdb_test "help f" "Select and print a stack frame..*\[\r\n\]+With no argument, print the selected stack frame. .See also \"info frame\".*\[\r\n\]+An argument specifies the frame to select..*\[\r\n\]+It can be a stack frame number or the address of the frame..*\[\r\n\]+With argument, nothing is printed if input is coming from.*\[\r\n\]+a command file or a user-defined command." "help frame \"f\" abbreviation" +gdb_test "help f" "Select and print a stack frame\.\[\r\n\]+With no argument, print the selected stack frame\. \\(See also \"info frame\"\\)\.\[\r\n\]+An argument specifies the frame to select\.\[\r\n\]+It can be a stack frame number or the address of the frame\.\[\r\n\]+With argument, nothing is printed if input is coming from\[\r\n\]+a command file or a user-defined command\." "help frame \"f\" abbreviation" # test help frame -gdb_test "help frame" "Select and print a stack frame..*\[\r\n\]+With no argument, print the selected stack frame. .See also \"info frame\"...*\[\r\n\]+An argument specifies the frame to select..*\[\r\n\]+It can be a stack frame number or the address of the frame..*\[\r\n\]+With argument, nothing is printed if input is coming from.*\[\r\n\]+a command file or a user-defined command." "help frame" +gdb_test "help frame" "Select and print a stack frame\.\[\r\n\]+With no argument, print the selected stack frame\. \\(See also \"info frame\"\\)\.\[\r\n\]+An argument specifies the frame to select\.\[\r\n\]+It can be a stack frame number or the address of the frame\.\[\r\n\]+With argument, nothing is printed if input is coming from\[\r\n\]+a command file or a user-defined command\." "help frame" # test help fg -gdb_test "help fg" "Continue program being debugged.*" "help fg" +gdb_test "help fg" "Continue program being debugged.*" "help fg" # test help file -gdb_test "help file" "Use FILE as program to be debugged..*\[\r\n\]+It is read for its symbols, for getting the contents of pure memory,.*\[\r\n\]+and it is the program executed when you use the `run' command..*\[\r\n\]+If FILE cannot be found as specified, your execution directory path.*\[\r\n\]+..PATH. is searched for a command of that name..*\[\r\n\]+No arg means to have no executable file and no symbols." "help file" +gdb_test "help file" "Use FILE as program to be debugged\.\[\r\n\]+It is read for its symbols, for getting the contents of pure memory,\[\r\n\]+and it is the program executed when you use the `run' command\.\[\r\n\]+If FILE cannot be found as specified, your execution directory path\[\r\n\]+\\(\\\$PATH\\) is searched for a command of that name\.\[\r\n\]+No arg means to have no executable file and no symbols\." "help file" # test help files gdb_test "help files" "Specifying.*" "help files" # test help finish -gdb_test "help finish" "Execute until selected stack frame returns..*\[\r\n\]+Upon return, the value returned is printed and put in the value history." "help finish" +gdb_test "help finish" "Execute until selected stack frame returns\.\[\r\n\]+Upon return, the value returned is printed and put in the value history\." "help finish" # test help forward-search -gdb_test "help forward-search" "Search for regular expression .see regex.3.. from last line listed..*" "help forward-search" +gdb_test "help forward-search" "Search for regular expression \\(see regex\\(3\\)\\) from last line listed.*" "help forward-search" # test help gcore send_gdb "help gcore\n" gdb_expect { - -re "Undefined command: \"gcore\". Try \"help\".*$gdb_prompt $" { + -re "Undefined command: \"gcore\"\. Try \"help\".*$gdb_prompt $" { pass "help gcore" } - -re "Save a core file with the current state of the debugged process.\[\r\n\]+Argument is optional filename. Default filename is 'core.<process_id>'.*$gdb_prompt $" { + -re "Save a core file with the current state of the debugged process\.\[\r\n\]+Argument is optional filename\. Default filename is 'core\.<process_id>'.*$gdb_prompt $" { pass "help gcore" } default { fail "help gcore" } } send_gdb "help generate-core-file\n" gdb_expect { - -re "Undefined command: \"generate-core-file\". Try \"help\".*$gdb_prompt $" { + -re "Undefined command: \"generate-core-file\"\. Try \"help\".*$gdb_prompt $" { pass "help gcore" } - -re "Save a core file with the current state of the debugged process.\[\r\n\]+Argument is optional filename. Default filename is 'core.<process_id>'.*$gdb_prompt $" { + -re "Save a core file with the current state of the debugged process\.\[\r\n\]+Argument is optional filename\. Default filename is 'core\.<process_id>'.*$gdb_prompt $" { pass "help gcore" } default { fail "help gcore" } } # test help help "h" abbreviation -gdb_test "help h" "Print list of commands." "help help \"h\" abbreviation" +gdb_test "help h" "Print list of commands\." "help help \"h\" abbreviation" # test help help -gdb_test "help help" "Print list of commands." "help help" +gdb_test "help help" "Print list of commands\." "help help" # test help handle -gdb_test "help handle" "Specify how to handle a signal..*" "help handle" +gdb_test "help handle" "Specify how to handle a signal\..*" "help handle" # test help info "i" abbreviation -gdb_test "help i" "Generic command for showing things about the program being debugged..*\[\r\n\]+List of info subcommands:.*\[\r\n\]+Type \"help info\" followed by info subcommand name for full documentation..*\[\r\n\]+Command name abbreviations are allowed if unambiguous." "help info \"i\" abbreviation" +gdb_test "help i" "Generic command for showing things about the program being debugged\.\[\r\n\]+List of info subcommands:.*\[\r\n\]+Type \"help info\" followed by info subcommand name for full documentation\.\[\r\n\]+Command name abbreviations are allowed if unambiguous\." "help info \"i\" abbreviation" # test help info -gdb_test "help info" "Generic command for showing things about the program being debugged..*\[\r\n\]+List of info subcommands:.*\[\r\n\]+Type \"help info\" followed by info subcommand name for full documentation..*\[\r\n\]+Command name abbreviations are allowed if unambiguous." "help info" +gdb_test "help info" "Generic command for showing things about the program being debugged\.\[\r\n\]+List of info subcommands:.*\[\r\n\]+Type \"help info\" followed by info subcommand name for full documentation\.\[\r\n\]+Command name abbreviations are allowed if unambiguous\." "help info" # test help ignore -gdb_test "help ignore" "Set ignore-count of breakpoint number N to COUNT..*\[\r\n\]+Usage is `ignore N COUNT'." "help ignore" +gdb_test "help ignore" "Set ignore-count of breakpoint number N to COUNT\.\[\r\n\]+Usage is `ignore N COUNT'\." "help ignore" # test help info address -gdb_test "help info address" "Describe where symbol SYM is stored." "help info address" +gdb_test "help info address" "Describe where symbol SYM is stored\." "help info address" # test help info all-registers -gdb_test "help info all-registers" "List of all registers and their contents, for selected stack frame..*\[\r\n\]+Register name as argument means describe only that register." "help info all-registers" +gdb_test "help info all-registers" "List of all registers and their contents, for selected stack frame\.\[\r\n\]+Register name as argument means describe only that register\." "help info all-registers" # test help info args -gdb_test "help info args" "Argument variables of current stack frame." "help info args" +gdb_test "help info args" "Argument variables of current stack frame\." "help info args" # test help info breakpoints -gdb_test "help info breakpoints" "Status of user-settable breakpoints, or breakpoint number NUMBER..*\[\r\n\]+breakpoint set." "help info breakpoints" +gdb_test "help info breakpoints" "Status of user-settable breakpoints, or breakpoint number NUMBER\..*\[\r\n\]+breakpoint set\." "help info breakpoints" # test help info catch -gdb_test "help info catch" "Exceptions that can be caught in the current stack frame." "help info catch" +gdb_test "help info catch" "Exceptions that can be caught in the current stack frame\." "help info catch" # test help info copying -gdb_test "help info copying" "Conditions for redistributing copies of GDB." "help info copying" +gdb_test "help info copying" "Conditions for redistributing copies of GDB\." "help info copying" # test help info display -gdb_test "help info display" "Expressions to display when program stops, with code numbers." "help info display" +gdb_test "help info display" "Expressions to display when program stops, with code numbers\." "help info display" # test help info frame "f" abbreviation -gdb_test "help info f" "All about selected stack frame, or frame at ADDR." "help info frame \"f\" abbreviation" +gdb_test "help info f" "All about selected stack frame, or frame at ADDR\." "help info frame \"f\" abbreviation" # test help info frame -gdb_test "help info frame" "All about selected stack frame, or frame at ADDR." "help info frame" +gdb_test "help info frame" "All about selected stack frame, or frame at ADDR\." "help info frame" # test help info files -gdb_test "help info files" "Names of targets and files being debugged..*\[\r\n\]+Shows the entire stack of targets currently in use .including the exec-file,.*\[\r\n\]+core-file, and process, if any., as well as the symbol file name." "help info files" +gdb_test "help info files" "Names of targets and files being debugged\.\[\r\n\]+Shows the entire stack of targets currently in use \\(including the exec-file,\[\r\n\]+core-file, and process, if any\\), as well as the symbol file name\." "help info files" # test help info float -gdb_test "help info float" "Print the status of the floating point unit" "help info float" +gdb_test "help info float" "Print the status of the floating point unit" "help info float" # test help info functions -gdb_test "help info functions" "All function names, or those matching REGEXP." "help info functions" +gdb_test "help info functions" "All function names, or those matching REGEXP\." "help info functions" # test help info line -gdb_test "help info line" "Core addresses of the code for a source line..*\[\r\n\]+Line can be specified as.*\[\r\n\]+ LINENUM, to list around that line in current file,.*\[\r\n\]+ FILE:LINENUM, to list around that line in that file,.*\[\r\n\]+ FUNCTION, to list around beginning of that function,.*\[\r\n\]+ FILE:FUNCTION, to distinguish among like-named static functions..*\[\r\n\]+Default is to describe the last source line that was listed..*\[\r\n\]+This sets the default address for \"x\" to the line's first instruction.*\[\r\n\]+so that \"x.i\" suffices to start examining the machine code..*\[\r\n\]+The address is also stored as the value of \"._\"." "help info line" +gdb_test "help info line" "Core addresses of the code for a source line\.\[\r\n\]+Line can be specified as\[\r\n\]+ LINENUM, to list around that line in current file,\[\r\n\]+ FILE:LINENUM, to list around that line in that file,\[\r\n\]+ FUNCTION, to list around beginning of that function,\[\r\n\]+ FILE:FUNCTION, to distinguish among like-named static functions\.\[\r\n\]+Default is to describe the last source line that was listed\.\[\r\n\]+This sets the default address for \"x\" to the line's first instruction\[\r\n\]+so that \"x/i\" suffices to start examining the machine code\.\[\r\n\]+The address is also stored as the value of \"\\\$_\"\." "help info line" # test help info locals -gdb_test "help info locals" "Local variables of current stack frame." "help info locals" +gdb_test "help info locals" "Local variables of current stack frame\." "help info locals" # test help info program -gdb_test "help info program" "Execution status of the program." "help info program" +gdb_test "help info program" "Execution status of the program\." "help info program" # test help info registers -gdb_test "help info registers" "List of integer registers and their contents, for selected stack frame..*\[\r\n\]+Register name as argument means describe only that register." "help info registers" +gdb_test "help info registers" "List of integer registers and their contents, for selected stack frame\.\[\r\n\]+Register name as argument means describe only that register\." "help info registers" # test help info stack "s" abbreviation -gdb_test "help info s" "Backtrace of the stack, or innermost COUNT frames." "help info stack \"s\" abbreviation" +gdb_test "help info s" "Backtrace of the stack, or innermost COUNT frames\." "help info stack \"s\" abbreviation" # test help info stack -gdb_test "help info stack" "Backtrace of the stack, or innermost COUNT frames." "help info stack" +gdb_test "help info stack" "Backtrace of the stack, or innermost COUNT frames\." "help info stack" # test help info set -gdb_test "help info set" "Show all GDB settings." "help info set" +gdb_test "help info set" "Show all GDB settings\." "help info set" # test help info signals -gdb_test "help info signals" "What debugger does when program gets various signals.*" "help info signals" +gdb_test "help info signals" "What debugger does when program gets various signals.*" "help info signals" # test help info source -gdb_test "help info source" "Information about the current source file." "help info source" +gdb_test "help info source" "Information about the current source file\." "help info source" # test help info sources -gdb_test "help info sources" "Source files in the program." "help info sources" +gdb_test "help info sources" "Source files in the program\." "help info sources" # test help info symbol gdb_test "help info symbol" "Describe what symbol is at location ADDR.*" # test help info target -gdb_test "help info target" "Names of targets and files being debugged..*\[\r\n\]+Shows the entire stack of targets currently in use .including the exec-file,.*\[\r\n\]+core-file, and process, if any., as well as the symbol file name." "help info target" +gdb_test "help info target" "Names of targets and files being debugged\.\[\r\n\]+Shows the entire stack of targets currently in use \\(including the exec-file,\[\r\n\]+core-file, and process, if any\\), as well as the symbol file name\." "help info target" # test help info terminal -gdb_test "help info terminal" "Print inferior's saved terminal status." "help info terminal" +gdb_test "help info terminal" "Print inferior's saved terminal status\." "help info terminal" # test help info types -gdb_test "help info types" "All type names, or those matching REGEXP." "help info types" +gdb_test "help info types" "All type names, or those matching REGEXP\." "help info types" # test help info variables -gdb_test "help info variables" "All global and static variable names, or those matching REGEXP." "help info variables" +gdb_test "help info variables" "All global and static variable names, or those matching REGEXP\." "help info variables" # test help info warranty -gdb_test "help info warranty" "Various kinds of warranty you do not have." "help info warranty" +gdb_test "help info warranty" "Various kinds of warranty you do not have\." "help info warranty" # test help info watchpoints -gdb_test "help info watchpoints" "Synonym for ``info breakpoints''." "help info watchpoints" +gdb_test "help info watchpoints" "Synonym for ``info breakpoints''\." "help info watchpoints" # test help inspect -gdb_test "help inspect" "Same as \"print\" command, except that if you are running in the epoch.*\[\r\n\]+environment, the value is printed in its own window." "help inspect" +gdb_test "help inspect" "Same as \"print\" command, except that if you are running in the epoch\[\r\n\]+environment, the value is printed in its own window\." "help inspect" # test help jump -gdb_test "help jump" "Continue program being debugged at specified line or address..*\[\r\n\]+Give as argument either LINENUM or \[*\]+ADDR, where ADDR is an expression.*\[\r\n\]+for an address to start at." "help jump" +gdb_test "help jump" "Continue program being debugged at specified line or address\.\[\r\n\]+Give as argument either LINENUM or \[*\]+ADDR, where ADDR is an expression\[\r\n\]+for an address to start at\." "help jump" # test help kill -gdb_test "help kill" "Kill execution of program being debugged." "help kill" +gdb_test "help kill" "Kill execution of program being debugged\." "help kill" # test help list "l" abbreviation -gdb_test "help l" "List specified function or line..*\[\r\n\]+With no argument, lists ten more lines after or around previous listing..*\[\r\n\]+\"list -\" lists the ten lines before a previous ten-line listing..*\[\r\n\]+One argument specifies a line, and ten lines are listed around that line..*\[\r\n\]+Two arguments with comma between specify starting and ending lines to list..*\[\r\n\]+Lines can be specified in these ways:.*\[\r\n\]+ LINENUM, to list around that line in current file,.*\[\r\n\]+ FILE:LINENUM, to list around that line in that file,.*\[\r\n\]+ FUNCTION, to list around beginning of that function,.*\[\r\n\]+ FILE:FUNCTION, to distinguish among like-named static functions..*\[\r\n\]+ \[*\]+ADDRESS, to list around the line containing that address..*\[\r\n\]+With two args if one is empty it stands for ten lines away from the other arg." "help list \"l\" abbreviation" +gdb_test "help l" "List specified function or line\.\[\r\n\]+With no argument, lists ten more lines after or around previous listing\.\[\r\n\]+\"list -\" lists the ten lines before a previous ten-line listing\.\[\r\n\]+One argument specifies a line, and ten lines are listed around that line\.\[\r\n\]+Two arguments with comma between specify starting and ending lines to list\.\[\r\n\]+Lines can be specified in these ways:\[\r\n\]+ LINENUM, to list around that line in current file,\[\r\n\]+ FILE:LINENUM, to list around that line in that file,\[\r\n\]+ FUNCTION, to list around beginning of that function,\[\r\n\]+ FILE:FUNCTION, to distinguish among like-named static functions\.\[\r\n\]+ \[*\]ADDRESS, to list around the line containing that address\.\[\r\n\]+With two args if one is empty it stands for ten lines away from the other arg\." "help list \"l\" abbreviation" # test help list -gdb_test "help list" "List specified function or line..*\[\r\n\]+With no argument, lists ten more lines after or around previous listing..*\[\r\n\]+\"list -\" lists the ten lines before a previous ten-line listing..*\[\r\n\]+One argument specifies a line, and ten lines are listed around that line..*\[\r\n\]+Two arguments with comma between specify starting and ending lines to list..*\[\r\n\]+Lines can be specified in these ways:.*\[\r\n\]+ LINENUM, to list around that line in current file,.*\[\r\n\]+ FILE:LINENUM, to list around that line in that file,.*\[\r\n\]+ FUNCTION, to list around beginning of that function,.*\[\r\n\]+ FILE:FUNCTION, to distinguish among like-named static functions..*\[\r\n\]+ \[*\]+ADDRESS, to list around the line containing that address..*\[\r\n\]+With two args if one is empty it stands for ten lines away from the other arg." "help list" +gdb_test "help list" "List specified function or line\.\[\r\n\]+With no argument, lists ten more lines after or around previous listing\.\[\r\n\]+\"list -\" lists the ten lines before a previous ten-line listing\.\[\r\n\]+One argument specifies a line, and ten lines are listed around that line\.\[\r\n\]+Two arguments with comma between specify starting and ending lines to list\.\[\r\n\]+Lines can be specified in these ways:\[\r\n\]+ LINENUM, to list around that line in current file,\[\r\n\]+ FILE:LINENUM, to list around that line in that file,\[\r\n\]+ FUNCTION, to list around beginning of that function,\[\r\n\]+ FILE:FUNCTION, to distinguish among like-named static functions\.\[\r\n\]+ \[*\]ADDRESS, to list around the line containing that address\.\[\r\n\]+With two args if one is empty it stands for ten lines away from the other arg\." "help list" # test help load -gdb_test "help load" "Dynamically load FILE into the running program, and record its symbols.*\[\r\n\]+for access from GDB." "help load" +gdb_test "help load" "Dynamically load FILE into the running program, and record its symbols\[\r\n\]+for access from GDB\." "help load" # test help make -gdb_test "help make" "Run the ``make'' program using the rest of the line as arguments." "help make" +gdb_test "help make" "Run the ``make'' program using the rest of the line as arguments\." "help make" # test help next "n" abbreviation -gdb_test "help n" "Step program, proceeding through subroutine calls..*\[\r\n\]+Like the \"step\" command as long as subroutine calls do not happen;.*\[\r\n\]+when they do, the call is treated as one instruction..*\[\r\n\]+Argument N means do this N times .or till program stops for another reason.." "help next \"n\" abbreviation" +gdb_test "help n" "Step program, proceeding through subroutine calls\.\[\r\n\]+Like the \"step\" command as long as subroutine calls do not happen;\[\r\n\]+when they do, the call is treated as one instruction\.\[\r\n\]+Argument N means do this N times \\(or till program stops for another reason\\)\." "help next \"n\" abbreviation" # test help next -gdb_test "help next" "Step program, proceeding through subroutine calls..*\[\r\n\]+Like the \"step\" command as long as subroutine calls do not happen;.*\[\r\n\]+when they do, the call is treated as one instruction..*\[\r\n\]+Argument N means do this N times .or till program stops for another reason.." "help next" +gdb_test "help next" "Step program, proceeding through subroutine calls\.\[\r\n\]+Like the \"step\" command as long as subroutine calls do not happen;\[\r\n\]+when they do, the call is treated as one instruction\.\[\r\n\]+Argument N means do this N times \\(or till program stops for another reason\\)\." "help next" # test help nexti -gdb_test "help ni" "Step one instruction, but proceed through subroutine calls..*\[\r\n\]+Argument N means do this N times .or till program stops for another reason.." "help nexti" +gdb_test "help ni" "Step one instruction, but proceed through subroutine calls\.\[\r\n\]+Argument N means do this N times \\(or till program stops for another reason\\)\." "help nexti" # all the commands that used to be here are now in "maintainance" instead # test help obscure -gdb_test "help obscure" "Obscure features..*\[\r\n\]+List of commands:.*\[\r\n\]+Type \"help\" followed by command name for full documentation..*\[\r\n\]+Command name abbreviations are allowed if unambiguous." "help obscure" +gdb_test "help obscure" "Obscure features\.\[\r\n\]+List of commands:.*\[\r\n\]+Type \"help\" followed by command name for full documentation\.\[\r\n\]+Command name abbreviations are allowed if unambiguous\." "help obscure" # test help output -gdb_test "help output" "Like \"print\" but don't put in value history and don't print newline..*\[\r\n\]+This is useful in user-defined commands." "help output" +gdb_test "help output" "Like \"print\" but don't put in value history and don't print newline\.\[\r\n\]+This is useful in user-defined commands\." "help output" # test help overlay gdb_test "help overlay" "Commands for debugging overlays.*" -gdb_test "help overlay off" "Disable overlay debugging." -gdb_test "help overlay manual" "Enable overlay debugging." -gdb_test "help overlay auto" "Enable automatic overlay debugging." -gdb_test "help overlay list" "List mappings of overlay sections." -gdb_test "help overlay map" "Assert that an overlay section is mapped." -gdb_test "help overlay unmap" "Assert that an overlay section is unmapped." -gdb_test "help overlay load" "Read the overlay mapping state from the target." +gdb_test "help overlay off" "Disable overlay debugging\." +gdb_test "help overlay manual" "Enable overlay debugging\." +gdb_test "help overlay auto" "Enable automatic overlay debugging\." +gdb_test "help overlay list" "List mappings of overlay sections\." +gdb_test "help overlay map" "Assert that an overlay section is mapped\." +gdb_test "help overlay unmap" "Assert that an overlay section is unmapped\." +gdb_test "help overlay load" "Read the overlay mapping state from the target\." # test help print "p" abbreviation -gdb_test "help p" "Print value of expression EXP..*\[\r\n\]+Variables accessible are those of the lexical environment of the selected.*\[\r\n\]+EXP may be preceded with /FMT, where FMT is a format letter.*\[\r\n\]+but no count or size letter .see \"x\" command.." "help print \"p\" abbreviation" +gdb_test "help p" "Print value of expression EXP\.\[\r\n\]+Variables accessible are those of the lexical environment of the selected.*\[\r\n\]+EXP may be preceded with /FMT, where FMT is a format letter\[\r\n\]+but no count or size letter \\(see \"x\" command\\)\." "help print \"p\" abbreviation" # test help print -gdb_test "help print" "Print value of expression EXP..*\[\r\n\]+Variables accessible are those of the lexical environment of the selected.*\[\r\n\]+EXP may be preceded with /FMT, where FMT is a format letter.*\[\r\n\]+but no count or size letter .see \"x\" command.." "help print" +gdb_test "help print" "Print value of expression EXP\.\[\r\n\]+Variables accessible are those of the lexical environment of the selected.*\[\r\n\]+EXP may be preceded with /FMT, where FMT is a format letter\[\r\n\]+but no count or size letter \\(see \"x\" command\\)\." "help print" # test help path -gdb_test "help path" "Add directory DIR.s. to beginning of search path for object files..*\[\r\n\]+.cwd in the path means the current working directory..*\[\r\n\]+This path is equivalent to the .PATH shell variable. It is a list of.*\[\r\n\]+directories, separated by colons. These directories are searched to find.*\[\r\n\]+fully linked executable files and separately compiled object files as needed." "help path" +gdb_test "help path" "Add directory DIR\\(s\\) to beginning of search path for object files\.\[\r\n\]+\\\$cwd in the path means the current working directory\.\[\r\n\]+This path is equivalent to the \\\$PATH shell variable\. It is a list of\[\r\n\]+directories, separated by colons\. These directories are searched to find\[\r\n\]+fully linked executable files and separately compiled object files as needed\." "help path" # test help printcmds -gdb_test "help printcmds" "Undefined command: \"printcmds\". Try \"help\"." "help printcmds" +gdb_test "help printcmds" "Undefined command: \"printcmds\"\. Try \"help\"\." "help printcmds" # test help printf -gdb_test "help printf" "printf \"printf format string\", arg1, arg2, arg3, ..., argn.*\[\r\n\]+This is useful for formatted output in user-defined commands." "help printf" +gdb_test "help printf" "printf \"printf format string\", arg1, arg2, arg3, \.\.\., argn\[\r\n\]+This is useful for formatted output in user-defined commands\." "help printf" # test help ptype -gdb_test "help ptype" "Print definition of type.*" "help ptype" +gdb_test "help ptype" "Print definition of type.*" "help ptype" # test help pwd -gdb_test "help pwd" "Print working directory. This is used for your program as well." "help pwd" +gdb_test "help pwd" "Print working directory\. This is used for your program as well\." "help pwd" # test help quit "q" abbreviation -gdb_test "help q" "Exit gdb." "help quit \"q\" abbreviation" +gdb_test "help q" "Exit gdb\." "help quit \"q\" abbreviation" # test help quit -gdb_test "help quit" "Exit gdb." "help quit" +gdb_test "help quit" "Exit gdb\." "help quit" # test help run "r" abbreviation -gdb_test "help r" "Start debugged program. You may specify arguments to give it..*\[\r\n\]+Args may include .*, or .*; they are expanded using \"sh\"..*\[\r\n\]+Input and output redirection with \".\", \".\", or \"..\" are also allowed..*\[\r\n\]+With no arguments, uses arguments last specified .with \"run\" or \"set args\"...*\[\r\n\]+To cancel previous arguments and run with no arguments,.*\[\r\n\]+use \"set args\" without arguments." "help run \"r\" abbreviation" +gdb_test "help r" "Start debugged program\. You may specify arguments to give it\.\[\r\n\]+Args may include \"\\*\", or \"\\\[\.\.\.\\\]\"; they are expanded using \"sh\"\.\[\r\n\]+Input and output redirection with \">\", \"<\", or \">>\" are also allowed\.\[\r\n\]+With no arguments, uses arguments last specified \\(with \"run\" or \"set args\"\\)\.\[\r\n\]+To cancel previous arguments and run with no arguments,\[\r\n\]+use \"set args\" without arguments\." "help run \"r\" abbreviation" # test help run -gdb_test "help run" "Start debugged program. You may specify arguments to give it..*\[\r\n\]+Args may include .*, or .*; they are expanded using \"sh\"..*\[\r\n\]+Input and output redirection with \".\", \".\", or \"..\" are also allowed..*\[\r\n\]+With no arguments, uses arguments last specified .with \"run\" or \"set args\"...*\[\r\n\]+To cancel previous arguments and run with no arguments,.*\[\r\n\]+use \"set args\" without arguments." "help run" +gdb_test "help run" "Start debugged program\. You may specify arguments to give it\.\[\r\n\]+Args may include \"\\*\", or \"\\\[\.\.\.\\\]\"; they are expanded using \"sh\"\.\[\r\n\]+Input and output redirection with \">\", \"<\", or \">>\" are also allowed\.\[\r\n\]+With no arguments, uses arguments last specified \\(with \"run\" or \"set args\"\\)\.\[\r\n\]+To cancel previous arguments and run with no arguments,\[\r\n\]+use \"set args\" without arguments\." "help run" # test help rbreak -gdb_test "help rbreak" "Set a breakpoint for all functions matching REGEXP." "help rbreak" +gdb_test "help rbreak" "Set a breakpoint for all functions matching REGEXP\." "help rbreak" # test help return -gdb_test "help return" "Make selected stack frame return to its caller..*\[\r\n\]+Control remains in the debugger, but when you continue.*\[\r\n\]+execution will resume in the frame above the one now selected..*\[\r\n\]+If an argument is given, it is an expression for the value to return." "help return" +gdb_test "help return" "Make selected stack frame return to its caller\.\[\r\n\]+Control remains in the debugger, but when you continue\[\r\n\]+execution will resume in the frame above the one now selected\.\[\r\n\]+If an argument is given, it is an expression for the value to return\." "help return" # test help reverse-search -gdb_test "help reverse-search" "Search backward for regular expression .see regex.3.. from last line listed..*" "help reverse-search" +gdb_test "help reverse-search" "Search backward for regular expression \\(see regex\\(3\\)\\) from last line listed\..*" "help reverse-search" # test help running -gdb_test "help running" "Running the program..*\[\r\n\]+List of commands:.*\[\r\n\]+Type \"help\" followed by command name for full documentation..*\[\r\n\]+Command name abbreviations are allowed if unambiguous." "help running" +gdb_test "help running" "Running the program\.\[\r\n\]+List of commands:.*\[\r\n\]+Type \"help\" followed by command name for full documentation\.\[\r\n\]+Command name abbreviations are allowed if unambiguous\." "help running" # test help step "s" abbreviation -gdb_test "help s" "Step program until it reaches a different source line..*\[\r\n\]+Argument N means do this N times .or till program stops for another reason.." "help step \"s\" abbreviation" +gdb_test "help s" "Step program until it reaches a different source line\.\[\r\n\]+Argument N means do this N times \\(or till program stops for another reason\\)\." "help step \"s\" abbreviation" # test help step -gdb_test "help step" "Step program until it reaches a different source line..*\[\r\n\]+Argument N means do this N times .or till program stops for another reason.." "help step #1" +gdb_test "help step" "Step program until it reaches a different source line\.\[\r\n\]+Argument N means do this N times \\(or till program stops for another reason\\)\." "help step #1" # test help search -gdb_test "help search" "Search for regular expression .see regex.3.. from last line listed..*" "help search" +gdb_test "help search" "Search for regular expression \\(see regex\\(3\\)\\) from last line listed\..*" "help search" # test help section -gdb_test "help section" "Change the base address of section SECTION of the exec file to ADDR..*\[\r\n\]+This can be used if the exec file does not contain section addresses,.*\[\r\n\]+.such as in the a.out format., or when the addresses specified in the.*\[\r\n\]+file itself are wrong. Each section must be changed separately. The.*\[\r\n\]+``info files'' command lists all the sections and their addresses." "help section" +gdb_test "help section" "Change the base address of section SECTION of the exec file to ADDR\.\[\r\n\]+This can be used if the exec file does not contain section addresses,\[\r\n\]+\\(such as in the a\.out format\\), or when the addresses specified in the\[\r\n\]+file itself are wrong\. Each section must be changed separately\. The\[\r\n\]+``info files'' command lists all the sections and their addresses\." "help section" #test help set annotate -gdb_test "help set annotate" "Set annotation_level.*\[\r\n\]+0 == normal; 1 == fullname \\(for use when running under emacs\\).*\[\r\n\]+2 == output annotated suitably for use by programs that control GDB." "help set annotate" +gdb_test "help set annotate" "Set annotation_level\.\[\r\n\]+0 == normal; 1 == fullname \\(for use when running under emacs\\)\[\r\n\]+2 == output annotated suitably for use by programs that control GDB\." "help set annotate" # test help set args -gdb_test "help set args" "Set argument list to give program being debugged when it is started..*\[\r\n\]+Follow this command with any number of args, to be passed to the program." +gdb_test "help set args" "Set argument list to give program being debugged when it is started\.\[\r\n\]+Follow this command with any number of args, to be passed to the program\." # test help set check "c" abbreviation -gdb_test "help set c" "Set the status of the type/range checker.*\[\r\n\]+List of set check subcommands:.*\[\r\n\]+set check range -- Set range checking.*\[\r\n\]+set check type -- Set type checking.*\[\r\n\]+Type \"help set check\" followed by set check subcommand name for full documentation..*\[\r\n\]+Command name abbreviations are allowed if unambiguous." "help set check \"c\" abbreviation" +gdb_test "help set c" "Set the status of the type/range checker\[\r\n\]+List of set check subcommands:\[\r\n\]+set check range -- Set range checking\[\r\n\]+set check type -- Set type checking\[\r\n\]+Type \"help set check\" followed by set check subcommand name for full documentation\.\[\r\n\]+Command name abbreviations are allowed if unambiguous\." "help set check \"c\" abbreviation" # test help set check "ch" abbreviation -gdb_test "help set ch" "Set the status of the type/range checker.*\[\r\n\]+List of set check subcommands:.*\[\r\n\]+set check range -- Set range checking.*\[\r\n\]+set check type -- Set type checking.*\[\r\n\]+Type \"help set check\" followed by set check subcommand name for full documentation..*\[\r\n\]+Command name abbreviations are allowed if unambiguous." "help set check \"ch\" abbreviation" +gdb_test "help set ch" "Set the status of the type/range checker\[\r\n\]+List of set check subcommands:\[\r\n\]+set check range -- Set range checking\[\r\n\]+set check type -- Set type checking\[\r\n\]+Type \"help set check\" followed by set check subcommand name for full documentation\.\[\r\n\]+Command name abbreviations are allowed if unambiguous\." "help set check \"ch\" abbreviation" # test help set check -gdb_test "help set check" "Set the status of the type/range checker.*\[\r\n\]+List of set check subcommands:.*\[\r\n\]+set check range -- Set range checking.*\[\r\n\]+set check type -- Set type checking.*\[\r\n\]+Type \"help set check\" followed by set check subcommand name for full documentation..*\[\r\n\]+Command name abbreviations are allowed if unambiguous." "help set check" +gdb_test "help set check" "Set the status of the type/range checker\[\r\n\]+List of set check subcommands:\[\r\n\]+set check range -- Set range checking\[\r\n\]+set check type -- Set type checking\[\r\n\]+Type \"help set check\" followed by set check subcommand name for full documentation\.\[\r\n\]+Command name abbreviations are allowed if unambiguous\." "help set check" # test help set check range -gdb_test "help set check range" "Set range checking. .on/warn/off/auto." "help set check range" +gdb_test "help set check range" "Set range checking\. \\(on/warn/off/auto\\)" "help set check range" # test help set check type -gdb_test "help set check type" "Set type checking. .on/warn/off/auto." "help set check type" +gdb_test "help set check type" "Set type checking\. \\(on/warn/off/auto\\)." "help set check type" # test help set complaints -gdb_test "help set complaints" "Set max number of complaints about incorrect symbols." "help set complaints" +gdb_test "help set complaints" "Set max number of complaints about incorrect symbols\." "help set complaints" # test help set confirm -gdb_test "help set confirm" "Set whether to confirm potentially dangerous operations." "help set confirm" +gdb_test "help set confirm" "Set whether to confirm potentially dangerous operations\." "help set confirm" # test help set editing -gdb_test "help set editing" "Set editing of command lines as they are typed..*\[\r\n\]+Use \"on\" to enable the editing, and \"off\" to disable it..*\[\r\n\]+Without an argument, command line editing is enabled. To edit, use.*\[\r\n\]+EMACS-like or VI-like commands like control-P or ESC." "help set editing" +gdb_test "help set editing" "Set editing of command lines as they are typed\.\[\r\n\]+Use \"on\" to enable the editing, and \"off\" to disable it\.\[\r\n\]+Without an argument, command line editing is enabled\. To edit, use\[\r\n\]+EMACS-like or VI-like commands like control-P or ESC\." "help set editing" # test help set environment -gdb_test "help set environment" "Set environment variable value to give the program..*\[\r\n\]+Arguments are VAR VALUE where VAR is variable name and VALUE is value..*\[\r\n\]+VALUES of environment variables are uninterpreted strings..*\[\r\n\]+This does not affect the program until the next \"run\" command." "help set environment" +gdb_test "help set environment" "Set environment variable value to give the program\.\[\r\n\]+Arguments are VAR VALUE where VAR is variable name and VALUE is value\.\[\r\n\]+VALUES of environment variables are uninterpreted strings\.\[\r\n\]+This does not affect the program until the next \"run\" command\." "help set environment" # test help set height -gdb_test "help set height" "Set number of lines gdb thinks are in a page." "help set height" +gdb_test "help set height" "Set number of lines gdb thinks are in a page\." "help set height" # test help set history expansion -gdb_test "help set history expansion" "Set history expansion on command input..*\[\r\n\]+Without an argument, history expansion is enabled." "help set history expansion" +gdb_test "help set history expansion" "Set history expansion on command input\.\[\r\n\]+Without an argument, history expansion is enabled\." "help set history expansion" # test help set history filename -gdb_test "help set history filename" "Set the filename in which to record the command history.*\[\r\n\]+ .the list of previous commands of which a record is kept.." "help set history filename" +gdb_test "help set history filename" "Set the filename in which to record the command history\[\r\n\]+ \\(the list of previous commands of which a record is kept\\)\." "help set history filename" # test help set history save -gdb_test "help set history save" "Set saving of the history record on exit..*\[\r\n\]+Use \"on\" to enable the saving, and \"off\" to disable it..*\[\r\n\]+Without an argument, saving is enabled." "help set history save" +gdb_test "help set history save" "Set saving of the history record on exit\.\[\r\n\]+Use \"on\" to enable the saving, and \"off\" to disable it\.\[\r\n\]+Without an argument, saving is enabled\." "help set history save" # test help set history size -gdb_test "help set history size" "Set the size of the command history, .*\[\r\n\]+ie. the number of previous commands to keep a record of." "help set history size" +gdb_test "help set history size" "Set the size of the command history, \[\r\n\]+ie\. the number of previous commands to keep a record of\." "help set history size" # test help set history -gdb_test "help set history" "Generic command for setting command history parameters..*\[\r\n\]+List of set history subcommands:.*\[\r\n\]+set history expansion -- Set history expansion on command input.*\[\r\n\]+set history filename -- Set the filename in which to record the command history.*\[\r\n\]+set history save -- Set saving of the history record on exit.*\[\r\n\]+set history size -- Set the size of the command history.*\[\r\n\]+Type \"help set history\" followed by set history subcommand name for full documentation..*\[\r\n\]+Command name abbreviations are allowed if unambiguous." "help set history" +gdb_test "help set history" "Generic command for setting command history parameters\.\[\r\n\]+List of set history subcommands:\[\r\n\]+set history expansion -- Set history expansion on command input\[\r\n\]+set history filename -- Set the filename in which to record the command history\[\r\n\]+set history save -- Set saving of the history record on exit\[\r\n\]+set history size -- Set the size of the command history\[\r\n\]+Type \"help set history\" followed by set history subcommand name for full documentation\.\[\r\n\]+Command name abbreviations are allowed if unambiguous\." "help set history" # test help set language -gdb_test "help set language" "Set the current source language." "help set language" +gdb_test "help set language" "Set the current source language\." "help set language" # test help set listsize -gdb_test "help set listsize" "Set number of source lines gdb will list by default." "help set listsize" +gdb_test "help set listsize" "Set number of source lines gdb will list by default\." "help set listsize" # test help set print "p" abbreviation # FIXME -- Ultrix hangs randomly on this very long output from gdb and # continues with its output only if something is sent to gdb. # Also, if the system is slow, it may time out because the output is large. -gdb_test "help set p" ".*\[\r\n\]+Generic command for setting how things print..*\[\r\n\]+List of set print subcommands:.*\[\r\n\]+Type \"help set print\" followed by set print subcommand name for full documentation..*\[\r\n\]+Command name abbreviations are allowed if unambiguous." "help set print \"p\" abbreviatio" +gdb_test "help set p" "Generic command for setting how things print\.\[\r\n\]+List of set print subcommands:.*\[\r\n\]+Type \"help set print\" followed by set print subcommand name for full documentation\.\[\r\n\]+Command name abbreviations are allowed if unambiguous\." "help set print \"p\" abbreviation" # test help set print "pr" abbreviation -gdb_test "help set pr" ".*\[\r\n\]+Generic command for setting how things print..*\[\r\n\]+List of set print subcommands:.*\[\r\n\]+Type \"help set print\" followed by set print subcommand name for full documentation..*\[\r\n\]+Command name abbreviations are allowed if unambiguous." "help set print \"pr\" abbreviation" +gdb_test "help set pr" "Generic command for setting how things print\.\[\r\n\]+List of set print subcommands:.*\[\r\n\]+Type \"help set print\" followed by set print subcommand name for full documentation\.\[\r\n\]+Command name abbreviations are allowed if unambiguous\." "help set print \"pr\" abbreviation" # test help set print -gdb_test "help set print" ".*\[\r\n\]+Generic command for setting how things print..*\[\r\n\]+List of set print subcommands:.*\[\r\n\]+Type \"help set print\" followed by set print subcommand name for full documentation..*\[\r\n\]+Command name abbreviations are allowed if unambiguous." "help set print" +gdb_test "help set print" "Generic command for setting how things print\.\[\r\n\]+List of set print subcommands:.*\[\r\n\]+Type \"help set print\" followed by set print subcommand name for full documentation\.\[\r\n\]+Command name abbreviations are allowed if unambiguous\." "help set print" # test help set print address -gdb_test "help set print address" "Set printing of addresses." "help set print address" +gdb_test "help set print address" "Set printing of addresses\." "help set print address" # test help set print array -gdb_test "help set print array" "Set prettyprinting of arrays." "help set print array" +gdb_test "help set print array" "Set prettyprinting of arrays\." "help set print array" # test help set print asm-demangle -gdb_test "help set print asm-demangle" "Set demangling of C\[+\]+ names in disassembly listings." "help set print asm-demangle" +gdb_test "help set print asm-demangle" "Set demangling of C\[+\]+ names in disassembly listings\." "help set print asm-demangle" # test help set print demangle -gdb_test "help set print demangle" "Set demangling of encoded C\[+\]+ names when displaying symbols." "help set print demangle" +gdb_test "help set print demangle" "Set demangling of encoded C\[+\]+ names when displaying symbols\." "help set print demangle" # test help set print elements -gdb_test "help set print elements" "Set limit on string chars or array elements to print..*\[\r\n\]+\"set print elements 0\" causes there to be no limit." "help set print elements" +gdb_test "help set print elements" "Set limit on string chars or array elements to print\.\[\r\n\]+\"set print elements 0\" causes there to be no limit\." "help set print elements" # test help set print object -gdb_test "help set print object" "Set printing of object's derived type based on vtable info." "help set print object" +gdb_test "help set print object" "Set printing of object's derived type based on vtable info\." "help set print object" # test help set print pretty -gdb_test "help set print pretty" "Set prettyprinting of structures." "help set print pretty" +gdb_test "help set print pretty" "Set prettyprinting of structures\." "help set print pretty" # test help set print sevenbit-strings -gdb_test "help set print sevenbit-strings" "Set printing of 8-bit characters in strings as .nnn." "help set print sevenbit-strings" +gdb_test "help set print sevenbit-strings" "Set printing of 8-bit characters in strings as \\\\nnn\." "help set print sevenbit-strings" # test help set print union -gdb_test "help set print union" "Set printing of unions interior to structures." "help set print union" +gdb_test "help set print union" "Set printing of unions interior to structures\." "help set print union" # test help set print vtbl -gdb_test "help set print vtbl" "Set printing of C\[+\]+ virtual function tables." "help set print vtbl" +gdb_test "help set print vtbl" "Set printing of C\[+\]+ virtual function tables\." "help set print vtbl" # test help set prompt -gdb_test "help set prompt" "Set gdb's prompt" "help set prompt" +gdb_test "help set prompt" "Set gdb's prompt" "help set prompt" # test help set radix -gdb_test "help set radix" "Set default input and output number radices.*\[\r\n\]+Use \'set input-radix\' or \'set output-radix\' to independently set each..*\[\r\n\]+Without an argument, sets both radices back to the default value of 10..*\[\r\n\]+" "help set radix" +gdb_test "help set radix" "Set default input and output number radices\.\[\r\n\]+Use \'set input-radix\' or \'set output-radix\' to independently set each\.\[\r\n\]+Without an argument, sets both radices back to the default value of 10\." "help set radix" # test help set symbol-reloading -gdb_test "help set symbol-reloading" "Set dynamic symbol table reloading multiple times in one run." "help set symbol-reloading" +gdb_test "help set symbol-reloading" "Set dynamic symbol table reloading multiple times in one run\." "help set symbol-reloading" # test help set variable -gdb_test "help set variable" ".*\[\r\n\]+Evaluate expression EXP and assign result to variable VAR, using assignment.*\[\r\n\]+syntax appropriate for the current language .VAR = EXP or VAR := EXP for.*\[\r\n\]+example.. VAR may be a debugger \"convenience\" variable .names starting.*\[\r\n\]+with \\\$., a register .a few standard names starting with \\\$., or an actual.*\[\r\n\]+variable in the program being debugged. EXP is any valid expression.*\[\r\n\]+This may usually be abbreviated to simply \"set\"." "help set variable" +gdb_test "help set variable" "Evaluate expression EXP and assign result to variable VAR, using assignment\[\r\n\]+syntax appropriate for the current language \\(VAR = EXP or VAR := EXP for\[\r\n\]+example\\)\. VAR may be a debugger \"convenience\" variable \\(names starting\[\r\n\]+with \\\$\\), a register \\(a few standard names starting with \\\$\\), or an actual\[\r\n\]+variable in the program being debugged\. EXP is any valid expression\.\[\r\n\]+This may usually be abbreviated to simply \"set\"\." "help set variable" # test help set verbose -gdb_test "help set verbose" "Set verbosity." "help set verbose" +gdb_test "help set verbose" "Set verbosity\." "help set verbose" #test help set width -gdb_test "help set width" "Set number of characters gdb thinks are in a line." "help set width" +gdb_test "help set width" "Set number of characters gdb thinks are in a line\." "help set width" # test help set write # This is only supported on targets which use exec.o. -gdb_test "help set write" "Set writing into executable and core files." "help set write" +gdb_test "help set write" "Set writing into executable and core files\." "help set write" # test help set # FIXME -- Ultrix hangs randomly on this very long output from gdb and # continues with its output only if something is sent to gdb. # Also, if the system is slow, it may time out because the output is large. -#gdb_test "help set" ".*\[\r\n\]+Evaluate expression EXP and assign result to variable VAR, using assignment.*\[\r\n\]+syntax appropriate for the current language .VAR = EXP or VAR := EXP for.*\[\r\n\]+example.. VAR may be a debugger \"convenience\" variable .names starting.*\[\r\n\]+with \\\$., a register .a few standard names starting with \\\$., or an actual.*\[\r\n\]+variable in the program being debugged. EXP is any valid expression.*\[\r\n\]+set listsize -- Set number of source lines gdb will list by default.*\[\r\n\]+Type \"help set\" followed by set subcommand name for full documentation..*\[\r\n\]+Command name abbreviations are allowed if unambiguous..*\[\r\n\]+" "help set" +gdb_test "help set" "Evaluate expression EXP and assign result to variable VAR, using assignment\[\r\n\]+syntax appropriate for the current language \\(VAR = EXP or VAR := EXP for\[\r\n\]+example\\)\. VAR may be a debugger \"convenience\" variable \\(names starting\[\r\n\]+with \\\$\\), a register \\(a few standard names starting with \\\$\\), or an actual\[\r\n\]+variable in the program being debugged\. EXP is any valid expression.*\[\r\n\]+set listsize -- Set number of source lines gdb will list by default.*\[\r\n\]+Type \"help set\" followed by set subcommand name for full documentation\.\[\r\n\]+Command name abbreviations are allowed if unambiguous..*\[\r\n\]+" "help set" # test help shell -gdb_test "help shell" "Execute the rest of the line as a shell command. .*\[\r\n\]+With no arguments, run an inferior shell." "help shell" +gdb_test "help shell" "Execute the rest of the line as a shell command\. \[\r\n\]+With no arguments, run an inferior shell\." "help shell" #test help show annotate -gdb_test "help show annotate" "Show annotation_level.*\[\r\n\]+0 == normal; 1 == fullname \\(for use when running under emacs\\).*\[\r\n\]+2 == output annotated suitably for use by programs that control GDB." "help show annotate" +gdb_test "help show annotate" "Show annotation_level\.\[\r\n\]+0 == normal; 1 == fullname \\(for use when running under emacs\\)\[\r\n\]+2 == output annotated suitably for use by programs that control GDB\." "help show annotate" # test help show args -gdb_test "help show args" "Show argument list to give program being debugged when it is started..*\[\r\n\]+Follow this command with any number of args, to be passed to the program." +gdb_test "help show args" "Show argument list to give program being debugged when it is started\.\[\r\n\]+Follow this command with any number of args, to be passed to the program\." # test help show check "c" abbreviation -gdb_test "help show c" "Show the status of the type/range checker.*\[\r\n\]+List of show check subcommands:.*\[\r\n\]+show check range -- Show range checking.*\[\r\n\]+show check type -- Show type checking.*\[\r\n\]+Type \"help show check\" followed by show check subcommand name for full documentation..*\[\r\n\]+Command name abbreviations are allowed if unambiguous." "help show check \"c\" abbreviation" +gdb_test "help show c" "Show the status of the type/range checker\[\r\n\]+List of show check subcommands:\[\r\n\]+show check range -- Show range checking\[\r\n\]+show check type -- Show type checking\[\r\n\]+Type \"help show check\" followed by show check subcommand name for full documentation\.\[\r\n\]+Command name abbreviations are allowed if unambiguous\." "help show check \"c\" abbreviation" # test help show check -gdb_test "help show check" "Show the status of the type/range checker.*\[\r\n\]+List of show check subcommands:.*\[\r\n\]+show check range -- Show range checking.*\[\r\n\]+show check type -- Show type checking.*\[\r\n\]+Type \"help show check\" followed by show check subcommand name for full documentation..*\[\r\n\]+Command name abbreviations are allowed if unambiguous." "help show check" +gdb_test "help show check" "Show the status of the type/range checker\[\r\n\]+List of show check subcommands:\[\r\n\]+show check range -- Show range checking\[\r\n\]+show check type -- Show type checking\[\r\n\]+Type \"help show check\" followed by show check subcommand name for full documentation\.\[\r\n\]+Command name abbreviations are allowed if unambiguous\." "help show check" # test help show check range -gdb_test "help show check range" "Show range checking. .on/warn/off/auto." "help show check range" +gdb_test "help show check range" "Show range checking\. \\(on/warn/off/auto\\)" "help show check range" # test help show check type -gdb_test "help show check type" "Show type checking. .on/warn/off/auto." "help show check type" +gdb_test "help show check type" "Show type checking\. \\(on/warn/off/auto\\)" "help show check type" # test help show commands -gdb_test "help show commands" "Show the history of commands you typed..*\[\r\n\]+You can supply a command number to start with, or a `\[+\]' to start after.*\[\r\n\]+the previous command number shown." "help show commands" +gdb_test "help show commands" "Show the history of commands you typed\.\[\r\n\]+You can supply a command number to start with, or a `\[+\]' to start after\[\r\n\]+the previous command number shown\." "help show commands" # test help show complaints -gdb_test "help show complaints" "Show max number of complaints about incorrect symbols." "help show complaints" +gdb_test "help show complaints" "Show max number of complaints about incorrect symbols\." "help show complaints" # test help show confirm -gdb_test "help show confirm" "Show whether to confirm potentially dangerous operations." "help show confirm" +gdb_test "help show confirm" "Show whether to confirm potentially dangerous operations\." "help show confirm" # test help show convenience -gdb_test "help show convenience" "Debugger convenience .\".foo\". variables..*\[\r\n\]+These variables are created when you assign them values;.*\[\r\n\]+thus, \"print .foo=1\" gives \".foo\" the value 1. Values may be any type..*\[\r\n\]+A few convenience variables are given values automatically:.*\[\r\n\]+\"._\"holds the last address examined with \"x\" or \"info lines\",.*\[\r\n\]+\".__\" holds the contents of the last address examined with \"x\"." "help show convenience" +gdb_test "help show convenience" "Debugger convenience \\(\"\\\$foo\"\\) variables\.\[\r\n\]+These variables are created when you assign them values;\[\r\n\]+thus, \"print \\\$foo=1\" gives \"\\\$foo\" the value 1\. Values may be any type\.\[\r\n\]+A few convenience variables are given values automatically:\[\r\n\]+\"\\\$_\"holds the last address examined with \"x\" or \"info lines\",\[\r\n\]+\"\\\$__\" holds the contents of the last address examined with \"x\"\." "help show convenience" # test help show directories -gdb_test "help show directories" "Current search path for finding source files..*\[\r\n\]+.cwd in the path means the current working directory..*\[\r\n\]+.cdir in the path means the compilation directory of the source file." "help show directories" +gdb_test "help show directories" "Current search path for finding source files\.\[\r\n\]+\\\$cwd in the path means the current working directory\.\[\r\n\]+\\\$cdir in the path means the compilation directory of the source file\." "help show directories" # test help show editing -gdb_test "help show editing" "Show editing of command lines as they are typed..*\[\r\n\]+Use \"on\" to enable the editing, and \"off\" to disable it..*\[\r\n\]+Without an argument, command line editing is enabled. To edit, use.*\[\r\n\]+EMACS-like or VI-like commands like control-P or ESC." "help show editing" +gdb_test "help show editing" "Show editing of command lines as they are typed\.\[\r\n\]+Use \"on\" to enable the editing, and \"off\" to disable it\.\[\r\n\]+Without an argument, command line editing is enabled\. To edit, use\[\r\n\]+EMACS-like or VI-like commands like control-P or ESC\." "help show editing" # test help show environment -gdb_test "help show environment" "The environment to give the program, or one variable's value..*\[\r\n\]+With an argument VAR, prints the value of environment variable VAR to.*\[\r\n\]+give the program being debugged. With no arguments, prints the entire.*\[\r\n\]+environment to be given to the program." "help show environment" +gdb_test "help show environment" "The environment to give the program, or one variable's value\.\[\r\n\]+With an argument VAR, prints the value of environment variable VAR to\[\r\n\]+give the program being debugged\. With no arguments, prints the entire\[\r\n\]+environment to be given to the program\." "help show environment" # test help show height -gdb_test "help show height" "Show number of lines gdb thinks are in a page." "help show height" +gdb_test "help show height" "Show number of lines gdb thinks are in a page\." "help show height" # test help show history expansion -gdb_test "help show history expansion" "Show history expansion on command input..*\[\r\n\]+Without an argument, history expansion is enabled." "help show history expansion" +gdb_test "help show history expansion" "Show history expansion on command input\.\[\r\n\]+Without an argument, history expansion is enabled\." "help show history expansion" # test help show history filename -gdb_test "help show history filename" "Show the filename in which to record the command history.*\[\r\n\]+ .the list of previous commands of which a record is kept.." "help show history filename" +gdb_test "help show history filename" "Show the filename in which to record the command history\[\r\n\]+ \\(the list of previous commands of which a record is kept\\)\." "help show history filename" # test help show history save -gdb_test "help show history save" "Show saving of the history record on exit..*\[\r\n\]+Use \"on\" to enable the saving, and \"off\" to disable it..*\[\r\n\]+Without an argument, saving is enabled." "help show history save" +gdb_test "help show history save" "Show saving of the history record on exit\.\[\r\n\]+Use \"on\" to enable the saving, and \"off\" to disable it\.\[\r\n\]+Without an argument, saving is enabled\." "help show history save" # test help show history size -gdb_test "help show history size" "Show the size of the command history, .*\[\r\n\]+ie. the number of previous commands to keep a record of." "help show history size" +gdb_test "help show history size" "Show the size of the command history, \[\r\n\]+ie\. the number of previous commands to keep a record of\." "help show history size" # test help show history -gdb_test "help show history" "Generic command for showing command history parameters..*\[\r\n\]+List of show history subcommands:.*\[\r\n\]+show history expansion -- Show history expansion on command input.*\[\r\n\]+show history filename -- Show the filename in which to record the command history.*\[\r\n\]+show history save -- Show saving of the history record on exit.*\[\r\n\]+show history size -- Show the size of the command history.*\[\r\n\]+Type \"help show history\" followed by show history subcommand name for full documentation..*\[\r\n\]+Command name abbreviations are allowed if unambiguous." "help show history" +gdb_test "help show history" "Generic command for showing command history parameters\.\[\r\n\]+List of show history subcommands:\[\r\n\]+show history expansion -- Show history expansion on command input\[\r\n\]+show history filename -- Show the filename in which to record the command history\[\r\n\]+show history save -- Show saving of the history record on exit\[\r\n\]+show history size -- Show the size of the command history\[\r\n\]+Type \"help show history\" followed by show history subcommand name for full documentation\.\[\r\n\]+Command name abbreviations are allowed if unambiguous\." "help show history" # test help show language -gdb_test "help show language" "Show the current source language." "help show language" +gdb_test "help show language" "Show the current source language\." "help show language" # test help show listsize -gdb_test "help show listsize" "Show number of source lines gdb will list by default." "help show listsize" +gdb_test "help show listsize" "Show number of source lines gdb will list by default\." "help show listsize" # test help show print "p" abbreviation -gdb_test "help show p" "Generic command for showing print settings..*\[\r\n\]+List of show print subcommands:.*\[\r\n\]+Type \"help show print\" followed by show print subcommand name for full documentation..*\[\r\n\]+Command name abbreviations are allowed if unambiguous." "help show print \"p\" abbreviation" +gdb_test "help show p" "Generic command for showing print settings\.\[\r\n\]+List of show print subcommands:.*\[\r\n\]+Type \"help show print\" followed by show print subcommand name for full documentation\.\[\r\n\]+Command name abbreviations are allowed if unambiguous\." "help show print \"p\" abbreviation" # test help show print "pr" abbreviation -gdb_test "help show pr" "Generic command for showing print settings..*\[\r\n\]+List of show print subcommands:.*\[\r\n\]+Type \"help show print\" followed by show print subcommand name for full documentation..*\[\r\n\]+Command name abbreviations are allowed if unambiguous." "help show print \"pr\" abbreviation" +gdb_test "help show pr" "Generic command for showing print settings\.\[\r\n\]+List of show print subcommands:.*\[\r\n\]+Type \"help show print\" followed by show print subcommand name for full documentation\.\[\r\n\]+Command name abbreviations are allowed if unambiguous\." "help show print \"pr\" abbreviation" # test help show print -gdb_test "help show print" "Generic command for showing print settings..*\[\r\n\]+List of show print subcommands:.*\[\r\n\]+Type \"help show print\" followed by show print subcommand name for full documentation..*\[\r\n\]+Command name abbreviations are allowed if unambiguous." "help show print" +gdb_test "help show print" "Generic command for showing print settings\.\[\r\n\]+List of show print subcommands:.*\[\r\n\]+Type \"help show print\" followed by show print subcommand name for full documentation\.\[\r\n\]+Command name abbreviations are allowed if unambiguous\." "help show print" # test help show paths -gdb_test "help show paths" "Current search path for finding object files..*\[\r\n\]+.cwd in the path means the current working directory..*\[\r\n\]+This path is equivalent to the .PATH shell variable. It is a list of.*\[\r\n\]+directories, separated by colons. These directories are searched to find.*\[\r\n\]+fully linked executable files and separately compiled object files as needed." "help show paths" +gdb_test "help show paths" "Current search path for finding object files\.\[\r\n\]+\\\$cwd in the path means the current working directory\.\[\r\n\]+This path is equivalent to the \\\$PATH shell variable\. It is a list of\[\r\n\]+directories, separated by colons\. These directories are searched to find\[\r\n\]+fully linked executable files and separately compiled object files as needed\." "help show paths" # test help show print address -gdb_test "help show print address" "Show printing of addresses." "help show print address" +gdb_test "help show print address" "Show printing of addresses\." "help show print address" # test help show print array -gdb_test "help show print array" "Show prettyprinting of arrays." "help show print array" +gdb_test "help show print array" "Show prettyprinting of arrays\." "help show print array" # test help show print asm-demangle -gdb_test "help show print asm-demangle" "Show demangling of C\[+\]+ names in disassembly listings." "help show print asm-demangle" +gdb_test "help show print asm-demangle" "Show demangling of C\[+\]+ names in disassembly listings\." "help show print asm-demangle" # test help show print demangle -gdb_test "help show print demangle" "Show demangling of encoded C\[+\]+ names when displaying symbols." "help show print demangle" +gdb_test "help show print demangle" "Show demangling of encoded C\[+\]+ names when displaying symbols\." "help show print demangle" # test help show print elements -gdb_test "help show print elements" "Show limit on string chars or array elements to print..*\[\r\n\]+\"set print elements 0\" causes there to be no limit." "help show print elements" +gdb_test "help show print elements" "Show limit on string chars or array elements to print\.\[\r\n\]+\"set print elements 0\" causes there to be no limit\." "help show print elements" # test help show print object -gdb_test "help show print object" "Show printing of object's derived type based on vtable info." "help show print object" +gdb_test "help show print object" "Show printing of object's derived type based on vtable info\." "help show print object" # test help show print pretty -gdb_test "help show print pretty" "Show prettyprinting of structures." "help show print pretty" +gdb_test "help show print pretty" "Show prettyprinting of structures\." "help show print pretty" # test help show print sevenbit-strings -gdb_test "help show print sevenbit-strings" "Show printing of 8-bit characters in strings as .nnn." "help show print sevenbit-strings" +gdb_test "help show print sevenbit-strings" "Show printing of 8-bit characters in strings as \\\\nnn\." "help show print sevenbit-strings" # test help show print union -gdb_test "help show print union" "Show printing of unions interior to structures." "help show print union" +gdb_test "help show print union" "Show printing of unions interior to structures\." "help show print union" # test help show print vtbl -gdb_test "help show print vtbl" "Show printing of C\[+\]+ virtual function tables." "help show print vtbl" +gdb_test "help show print vtbl" "Show printing of C\[+\]+ virtual function tables\." "help show print vtbl" # test help show prompt -gdb_test "help show prompt" "Show gdb's prompt" "help show prompt" +gdb_test "help show prompt" "Show gdb's prompt" "help show prompt" # test help show radix -gdb_test "help show radix" "Show the default input and output number radices.*\[\r\n\]+Use \'show input-radix\' or \'show output-radix\' to independently show each.*\[\r\n\]+" "help show radix" +gdb_test "help show radix" "Show the default input and output number radices\.\[\r\n\]+Use \'show input-radix\' or \'show output-radix\' to independently show each\." "help show radix" # test help show symbol-reloading -gdb_test "help show symbol-reloading" "Show dynamic symbol table reloading multiple times in one run." "help show symbol-reloading" +gdb_test "help show symbol-reloading" "Show dynamic symbol table reloading multiple times in one run\." "help show symbol-reloading" # test help show user -gdb_test "help show user" "Show definitions of user defined commands..*\[\r\n\]+Argument is the name of the user defined command..*\[\r\n\]+With no argument, show definitions of all user defined commands." "help show user" +gdb_test "help show user" "Show definitions of user defined commands\.\[\r\n\]+Argument is the name of the user defined command\.\[\r\n\]+With no argument, show definitions of all user defined commands\." "help show user" # test help show values -gdb_test "help show values" "Elements of value history around item number IDX .or last ten.." "help show values" +gdb_test "help show values" "Elements of value history around item number IDX \\(or last ten\\)\." "help show values" # test help show verbose -gdb_test "help show verbose" "Show verbosity..*" "help show verbose" +gdb_test "help show verbose" "Show verbosity\." "help show verbose" # test help show version -gdb_test "help show version" "Show what version of GDB this is." "help show version" +gdb_test "help show version" "Show what version of GDB this is\." "help show version" # test help show width -gdb_test "help show width" "Show number of characters gdb thinks are in a line." "help show width" +gdb_test "help show width" "Show number of characters gdb thinks are in a line\." "help show width" # test help show write # This is only supported on targets which use exec.o. -gdb_test "help show write" "Show writing into executable and core files." "help show write" +gdb_test "help show write" "Show writing into executable and core files\." "help show write" # test help show # FIXME -- Ultrix hangs randomly on this very long output from gdb and # continues with its output only if something is sent to gdb. # Also, if the system is slow, it may time out because the output is large. -#gdb_test "help show" "Generic command for showing things about the debugger..*\[\r\n\]+List of show subcommands:.*\[\r\n\]+show listsize -- Show number of source lines gdb will list by default.*\[\r\n\]+show directories -- Current search path for finding source files.*\[\r\n\]+Type \"help show\" followed by show subcommand name for full documentation..*\[\r\n\]+Command name abbreviations are allowed if unambiguous." "help show" +gdb_test "help show" "Generic command for showing things about the debugger\.\[\r\n\]+List of show subcommands:.*\[\r\n\]+show directories -- Current search path for finding source files.*\[\r\n\]+show listsize -- Show number of source lines gdb will list by default.*\[\r\n\]+Type \"help show\" followed by show subcommand name for full documentation\.\[\r\n\]+Command name abbreviations are allowed if unambiguous\." "help show" # test help step -gdb_test "help step" "Step program until it reaches a different source line..*\[\r\n\]+Argument N means do this N times .or till program stops for another reason.." "help step #2" +gdb_test "help step" "Step program until it reaches a different source line\.\[\r\n\]+Argument N means do this N times \\(or till program stops for another reason\\)\." "help step #2" # test help stepi "si" abbreviation -gdb_test "help si" "Step one instruction exactly..*\[\r\n\]+Argument N means do this N times .or till program stops for another reason.." "help stepi \"si\" abbreviation" +gdb_test "help si" "Step one instruction exactly\.\[\r\n\]+Argument N means do this N times \\(or till program stops for another reason\\)\." "help stepi \"si\" abbreviation" # test help stepi -gdb_test "help stepi" "Step one instruction exactly..*\[\r\n\]+Argument N means do this N times .or till program stops for another reason.." "help stepi" +gdb_test "help stepi" "Step one instruction exactly\.\[\r\n\]+Argument N means do this N times \\(or till program stops for another reason\\)\." "help stepi" # test help signal -gdb_test "help signal" "Continue program giving it signal.*" "help signal" +gdb_test "help signal" "Continue program giving it signal.*" "help signal" # test help source # vxgdb reads .vxgdbinit -gdb_test "help source" "Read commands from a file named FILE..*\[\r\n\]+Note that the file \"\[^\"\]*\" is read automatically in this way.*\[\r\n\]+when gdb is started." "help source" +gdb_test "help source" "Read commands from a file named FILE\.\[\r\n\]+Note that the file \"\[^\"\]*\" is read automatically in this way\[\r\n\]+when gdb is started\." "help source" # test help stack -gdb_test "help stack" "Examining the stack..*\[\r\n\]+When the program being debugged stops, gdb selects the innermost frame..*\[\r\n\]+The commands below can be used to select other frames by number or address..*\[\r\n\]+List of commands:.*\[\r\n\]+backtrace -- Print backtrace of all stack frames.*\[\r\n\]+bt -- Print backtrace of all stack frames.*\[\r\n\]+down -- Select and print stack frame called by this one.*\[\r\n\]+frame -- Select and print a stack frame.*\[\r\n\]+return -- Make selected stack frame return to its caller.*\[\r\n\]+select-frame -- Select a stack frame without printing anything.*\[\r\n\]+up -- Select and print stack frame that called this one.*\[\r\n\]+Type \"help\" followed by command name for full documentation..*\[\r\n\]+Command name abbreviations are allowed if unambiguous." "help stack" +gdb_test "help stack" "Examining the stack\..*\[\r\n\]+When the program being debugged stops, gdb selects the innermost frame\.\[\r\n\]+The commands below can be used to select other frames by number or address\.\[\r\n\]+List of commands:\[\r\n\]+backtrace -- Print backtrace of all stack frames\[\r\n\]+bt -- Print backtrace of all stack frames\[\r\n\]+down -- Select and print stack frame called by this one\[\r\n\]+frame -- Select and print a stack frame\[\r\n\]+return -- Make selected stack frame return to its caller\[\r\n\]+select-frame -- Select a stack frame without printing anything\[\r\n\]+up -- Select and print stack frame that called this one\[\r\n\]+Type \"help\" followed by command name for full documentation\.\[\r\n\]+Command name abbreviations are allowed if unambiguous\." "help stack" # test help status -gdb_test "help status" "Status inquiries..*\[\r\n\]+List of commands:.*\[\r\n\]+info -- Generic command for showing things about the program being debugged.*\[\r\n\]+show -- Generic command for showing things about the debugger.*\[\r\n\]+Type \"help\" followed by command name for full documentation..*\[\r\n\]+Command name abbreviations are allowed if unambiguous." "help status" +gdb_test "help status" "Status inquiries\.\[\r\n\]+List of commands:\[\r\n\]+info -- Generic command for showing things about the program being debugged\[\r\n\]+show -- Generic command for showing things about the debugger\[\r\n\]+Type \"help\" followed by command name for full documentation\.\[\r\n\]+Command name abbreviations are allowed if unambiguous\." "help status" # test help support # FIXME -- Ultrix hangs randomly on this very long output from gdb and # continues with its output only if something is sent to gdb. # Also, if the system is slow, it may time out because the output is large. -#gdb_test "help support" "Support facilities..*\[\r\n\]+List of commands:.*\[\r\n\]+show confirm -- Show whether to confirm potentially dangerous operations.*\[\r\n\]+show history -- Generic command for showing command history parameters.*\[\r\n\]+down-silently -- Same as the `down' command.*\[\r\n\]+up-silently -- Same as the `up' command.*\[\r\n\]+Type \"help\" followed by command name for full documentation..*\[\r\n\]+Command name abbreviations are allowed if unambiguous." "help support" +gdb_test "help support" "Support facilities\.\[\r\n\]+List of commands:.*\[\r\n\]+show confirm -- Show whether to confirm potentially dangerous operations.*\[\r\n\]+show history -- Generic command for showing command history parameters.*\[\r\n\]+Type \"help\" followed by command name for full documentation\.\[\r\n\]+Command name abbreviations are allowed if unambiguous\." "help support" # test help symbol-file -gdb_test "help symbol-file" "Load symbol table from executable file FILE..*\[\r\n\]+The `file' command can also load symbol tables, as well as setting the file.*\[\r\n\]+to execute." "help symbol-file" +gdb_test "help symbol-file" "Load symbol table from executable file FILE\.\[\r\n\]+The `file' command can also load symbol tables, as well as setting the file\[\r\n\]+to execute\." "help symbol-file" # test help target child -gdb_test "help target child" "Unix child process .started by the \"run\" command..*|Undefined target command: \"child\". Try \"help target\"." "help target child" +gdb_test "help target child" "Unix child process \\(started by the \"run\" command\\)\.|Undefined target command: \"child\"\. Try \"help target\"\." "help target child" # test help target procfs -gdb_test "help target procfs" "Unix /proc child process .started by the \"run\" command.*|Undefined target command: \"procfs\". Try \"help target\"." "help target procfs (procfs version)" +gdb_test "help target procfs" "Unix /proc child process \\(started by the \"run\" command\\)\.|Undefined target command: \"procfs\"\. Try \"help target\"\." "help target procfs (procfs version)" # test help target core -gdb_test "help target core" ".*Use a core file as a target.*Specify the filename of the core file.*|(Undefined target command: \"core\". Try \"help target\".)" "help target core" +gdb_test "help target core" "Use a core file as a target\. Specify the filename of the core file\.|(Undefined target command: \"core\"\. Try \"help target\"\.)" "help target core" # test help target exec -gdb_test "help target exec" "Use an executable file as a target..*\[\r\n\]+Specify the filename of the executable file." "help target exec" +gdb_test "help target exec" "Use an executable file as a target\.\[\r\n\]+Specify the filename of the executable file\." "help target exec" # test help target remote -gdb_test "help target remote" "Use a remote computer via a serial line, using a gdb-specific protocol..*\[\r\n\]+Specify the serial device it is connected to.*\[\r\n\]+.e.g. .*" "help target remote" +gdb_test "help target remote" "Use a remote computer via a serial line, using a gdb-specific protocol\.\[\r\n\]+Specify the serial device it is connected to\[\r\n\]+\\(e.g. .*" "help target remote" # test help target # the child process target may be "target child" or "target procfs" -gdb_test "help target" "Connect to a target machine or process..*\[\r\n\]+The first argument is the type or protocol of the target machine..*\[\r\n\]+Remaining arguments are interpreted by the target protocol. For more.*\[\r\n\]+information on the arguments for a particular protocol, type.*\[\r\n\]+`help target ' followed by the protocol name..*\[\r\n\]+List of target subcommands:.*\[\r\n\]+target exec -- Use an executable file as a target.*\[\r\n\]+Type \"help target\" followed by target subcommand name for full documentation..*\[\r\n\]+Command name abbreviations are allowed if unambiguous." "help target" +gdb_test "help target" "Connect to a target machine or process\.\[\r\n\]+The first argument is the type or protocol of the target machine\.\[\r\n\]+Remaining arguments are interpreted by the target protocol\. For more\[\r\n\]+information on the arguments for a particular protocol, type\[\r\n\]+`help target ' followed by the protocol name\.\[\r\n\]+List of target subcommands:.*\[\r\n\]+target exec -- Use an executable file as a target.*\[\r\n\]+Type \"help target\" followed by target subcommand name for full documentation\.\[\r\n\]+Command name abbreviations are allowed if unambiguous\." "help target" # test help tbreak -gdb_test "help tbreak" "Set a temporary breakpoint.*" "help tbreak" +gdb_test "help tbreak" "Set a temporary breakpoint.*" "help tbreak" # test help tty -gdb_test "help tty" "Set terminal for future runs of program being debugged." "help tty" +gdb_test "help tty" "Set terminal for future runs of program being debugged\." "help tty" # test help until "u" abbreviation -gdb_test "help u" "Execute until the program reaches a source line greater than the current.*\[\r\n\]+or a specified line or address or function .same args as break command...*\[\r\n\]+Execution will also stop upon exit from the current stack frame." "help until \"u\" abbreviation" +gdb_test "help u" "Execute until the program reaches a source line greater than the current\[\r\n\]+or a specified line or address or function \\(same args as break command\\)\.\[\r\n\]+Execution will also stop upon exit from the current stack frame\." "help until \"u\" abbreviation" # test help until -gdb_test "help until" "Execute until the program reaches a source line greater than the current.*\[\r\n\]+or a specified line or address or function .same args as break command...*\[\r\n\]+Execution will also stop upon exit from the current stack frame." "help until" +gdb_test "help until" "Execute until the program reaches a source line greater than the current\[\r\n\]+or a specified line or address or function \\(same args as break command\\)\.\[\r\n\]+Execution will also stop upon exit from the current stack frame\." "help until" # test help undisplay -gdb_test "help undisplay" "Cancel some expressions to be displayed when program stops..*\[\r\n\]+Arguments are the code numbers of the expressions to stop displaying..*\[\r\n\]+No argument means cancel all automatic-display expressions..*\[\r\n\]+\"delete display\" has the same effect as this command..*\[\r\n\]+Do \"info display\" to see current list of code numbers." "help undisplay" +gdb_test "help undisplay" "Cancel some expressions to be displayed when program stops\.\[\r\n\]+Arguments are the code numbers of the expressions to stop displaying\.\[\r\n\]+No argument means cancel all automatic-display expressions\.\[\r\n\]+\"delete display\" has the same effect as this command\.\[\r\n\]+Do \"info display\" to see current list of code numbers\." "help undisplay" # test help unset environment -gdb_test "help unset environment" "Cancel environment variable VAR for the program..*\[\r\n\]+This does not affect the program until the next \"run\" command." "help unset environment" +gdb_test "help unset environment" "Cancel environment variable VAR for the program\.\[\r\n\]+This does not affect the program until the next \"run\" command\." "help unset environment" # test help unset -gdb_test "help unset" "Complement to certain \"set\" commands.*\[\r\n\]+List of unset subcommands:.*\[\r\n\]+unset environment -- Cancel environment variable VAR for the program.*\[\r\n\]+Type \"help unset\" followed by unset subcommand name for full documentation..*\[\r\n\]+Command name abbreviations are allowed if unambiguous." "help unset" +gdb_test "help unset" "Complement to certain \"set\" commands\[\r\n\]+List of unset subcommands:\[\r\n\]+unset environment -- Cancel environment variable VAR for the program\[\r\n\]+Type \"help unset\" followed by unset subcommand name for full documentation\.\[\r\n\]+Command name abbreviations are allowed if unambiguous\." "help unset" # test help up -gdb_test "help up" "Select and print stack frame that called this one..*\[\r\n\]+An argument says how many frames up to go." "help up" +gdb_test "help up" "Select and print stack frame that called this one\.\[\r\n\]+An argument says how many frames up to go\." "help up" # test help up-silently -gdb_test "help up-silently" "Same as the `up' command, but does not print anything..*\[\r\n\]+This is useful in command scripts." "help up-silently" +gdb_test "help up-silently" "Same as the `up' command, but does not print anything\.\[\r\n\]+This is useful in command scripts\." "help up-silently" # test help user-defined -gdb_test "help user-defined" "User-defined commands..*\[\r\n\]+The commands in this class are those defined by the user..*\[\r\n\]+Use the \"define\" command to define a command..*\[\r\n\]+List of commands:.*\[\r\n\]+Type \"help\" followed by command name for full documentation..*\[\r\n\]+Command name abbreviations are allowed if unambiguous." "help user-defined" +gdb_test "help user-defined" "User-defined commands\.\[\r\n\]+The commands in this class are those defined by the user\.\[\r\n\]+Use the \"define\" command to define a command\.\[\r\n\]+List of commands:.*\[\r\n\]+Type \"help\" followed by command name for full documentation\.\[\r\n\]+Command name abbreviations are allowed if unambiguous\." "help user-defined" # test help watch -gdb_test "help watch" "Set a watchpoint for an expression..*\[\r\n\]+A watchpoint stops execution of your program whenever the value of.*\[\r\n\]+an expression changes." "help watch" +gdb_test "help watch" "Set a watchpoint for an expression\.\[\r\n\]+A watchpoint stops execution of your program whenever the value of\[\r\n\]+an expression changes\." "help watch" # test help whatis -gdb_test "help whatis" "Print data type of expression EXP." "help whatis" +gdb_test "help whatis" "Print data type of expression EXP\." "help whatis" # test help where -gdb_test "help where" "Print backtrace of all stack frames, or innermost COUNT frames..*\[\r\n\]+With a negative argument, print outermost -COUNT frames..*\[\r\n\]+Use of the 'full' qualifier also prints the values of the local variables." "help where" +gdb_test "help where" "Print backtrace of all stack frames, or innermost COUNT frames\.\[\r\n\]+With a negative argument, print outermost -COUNT frames\.\[\r\n\]+Use of the 'full' qualifier also prints the values of the local variables\." "help where" # test help x -gdb_test "help x" "Examine memory: x/FMT ADDRESS..*\[\r\n\]+ADDRESS is an expression for the memory address to examine..*\[\r\n\]+FMT is a repeat count followed by a format letter and a size letter..*\[\r\n\]+Defaults for format and size letters are those previously used..*\[\r\n\]+Default count is 1. Default address is following last thing printed.*\[\r\n\]+with this command or \"print\"." "help x" +gdb_test "help x" "Examine memory: x/FMT ADDRESS\.\[\r\n\]+ADDRESS is an expression for the memory address to examine\.\[\r\n\]+FMT is a repeat count followed by a format letter and a size letter\..*\[\r\n\]+Defaults for format and size letters are those previously used\.\[\r\n\]+Default count is 1\. Default address is following last thing printed\[\r\n\]+with this command or \"print\"\." "help x" # test help info bogus-gdb-command -gdb_test "help info bogus-gdb-command" "Undefined info command: \"bogus-gdb-command\". Try \"help info\"." "help info bogus-gdb-command" +gdb_test "help info bogus-gdb-command" "Undefined info command: \"bogus-gdb-command\"\. Try \"help info\"\." "help info bogus-gdb-command" # test help gotcha -gdb_test "help gotcha" "Undefined command: \"gotcha\". Try \"help\"." "help gotcha" +gdb_test "help gotcha" "Undefined command: \"gotcha\"\. Try \"help\"\." "help gotcha" # test apropos regex gdb_test "apropos \\\(print\[\^ bsiedf\\\".-\]\\\)" "handle -- Specify how to handle a signal" # test apropos >1 word string |