aboutsummaryrefslogtreecommitdiff
diff options
context:
space:
mode:
Diffstat
-rw-r--r--sim/bfin/ChangeLog4
-rw-r--r--sim/bfin/aclocal.m458
-rwxr-xr-xsim/bfin/configure57
-rw-r--r--sim/common/ChangeLog4
-rw-r--r--sim/common/acinclude.m448
-rw-r--r--sim/cris/ChangeLog4
-rwxr-xr-xsim/cris/configure67
-rw-r--r--sim/frv/ChangeLog4
-rwxr-xr-xsim/frv/configure57
-rw-r--r--sim/iq2000/ChangeLog4
-rwxr-xr-xsim/iq2000/configure57
-rwxr-xr-xsim/lm32/ChangeLog4
-rwxr-xr-xsim/lm32/configure67
-rw-r--r--sim/m32r/ChangeLog4
-rwxr-xr-xsim/m32r/configure57
-rw-r--r--sim/m68hc11/ChangeLog4
-rwxr-xr-xsim/m68hc11/configure69
-rw-r--r--sim/mips/ChangeLog4
-rwxr-xr-xsim/mips/configure57
-rw-r--r--sim/mn10300/ChangeLog4
-rwxr-xr-xsim/mn10300/configure107
-rw-r--r--sim/sh64/ChangeLog4
-rwxr-xr-xsim/sh64/configure57
23 files changed, 448 insertions, 354 deletions
diff --git a/sim/bfin/ChangeLog b/sim/bfin/ChangeLog
index 2b653b7..269246a 100644
--- a/sim/bfin/ChangeLog
+++ b/sim/bfin/ChangeLog
@@ -1,3 +1,7 @@
+2013-03-26 Mike Frysinger <vapier@gentoo.org>
+
+ * aclocal.m4, configure: Regenerate.
+
2013-03-23 Joel Sherrill <joel.sherrill@oarcorp.com>
* configure.ac: Use $SIM_DV_SOCKSER_O.
diff --git a/sim/bfin/aclocal.m4 b/sim/bfin/aclocal.m4
index 1b2d293..a18d39c 100644
--- a/sim/bfin/aclocal.m4
+++ b/sim/bfin/aclocal.m4
@@ -28,7 +28,8 @@
# General Public License for more details.
#
# You should have received a copy of the GNU General Public License
-# along with this program; if not, see <http://www.gnu.org/licenses/>.
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
#
# As a special exception to the GNU General Public License, if you
# distribute this file as part of a program that contains a
@@ -171,6 +172,61 @@ else
fi[]dnl
])# PKG_CHECK_MODULES
+
+# PKG_INSTALLDIR(DIRECTORY)
+# -------------------------
+# Substitutes the variable pkgconfigdir as the location where a module
+# should install pkg-config .pc files. By default the directory is
+# $libdir/pkgconfig, but the default can be changed by passing
+# DIRECTORY. The user can override through the --with-pkgconfigdir
+# parameter.
+AC_DEFUN([PKG_INSTALLDIR],
+[m4_pushdef([pkg_default], [m4_default([$1], ['${libdir}/pkgconfig'])])
+m4_pushdef([pkg_description],
+ [pkg-config installation directory @<:@]pkg_default[@:>@])
+AC_ARG_WITH([pkgconfigdir],
+ [AS_HELP_STRING([--with-pkgconfigdir], pkg_description)],,
+ [with_pkgconfigdir=]pkg_default)
+AC_SUBST([pkgconfigdir], [$with_pkgconfigdir])
+m4_popdef([pkg_default])
+m4_popdef([pkg_description])
+]) dnl PKG_INSTALLDIR
+
+
+# PKG_NOARCH_INSTALLDIR(DIRECTORY)
+# -------------------------
+# Substitutes the variable noarch_pkgconfigdir as the location where a
+# module should install arch-independent pkg-config .pc files. By
+# default the directory is $datadir/pkgconfig, but the default can be
+# changed by passing DIRECTORY. The user can override through the
+# --with-noarch-pkgconfigdir parameter.
+AC_DEFUN([PKG_NOARCH_INSTALLDIR],
+[m4_pushdef([pkg_default], [m4_default([$1], ['${datadir}/pkgconfig'])])
+m4_pushdef([pkg_description],
+ [pkg-config arch-independent installation directory @<:@]pkg_default[@:>@])
+AC_ARG_WITH([noarch-pkgconfigdir],
+ [AS_HELP_STRING([--with-noarch-pkgconfigdir], pkg_description)],,
+ [with_noarch_pkgconfigdir=]pkg_default)
+AC_SUBST([noarch_pkgconfigdir], [$with_noarch_pkgconfigdir])
+m4_popdef([pkg_default])
+m4_popdef([pkg_description])
+]) dnl PKG_NOARCH_INSTALLDIR
+
+
+# PKG_CHECK_VAR(VARIABLE, MODULE, CONFIG-VARIABLE,
+# [ACTION-IF-FOUND], [ACTION-IF-NOT-FOUND])
+# -------------------------------------------
+# Retrieves the value of the pkg-config variable for the given module.
+AC_DEFUN([PKG_CHECK_VAR],
+[AC_REQUIRE([PKG_PROG_PKG_CONFIG])dnl
+AC_ARG_VAR([$1], [value of $3 for $2, overriding pkg-config])dnl
+
+_PKG_CONFIG([$1], [variable="][$3]["], [$2])
+AS_VAR_COPY([$1], [pkg_cv_][$1])
+
+AS_VAR_IF([$1], [""], [$5], [$4])dnl
+])# PKG_CHECK_VAR
+
# AM_CONDITIONAL -*- Autoconf -*-
# Copyright (C) 1997, 2000, 2001, 2003, 2004, 2005, 2006, 2008
diff --git a/sim/bfin/configure b/sim/bfin/configure
index 27951c2..c56e55d 100755
--- a/sim/bfin/configure
+++ b/sim/bfin/configure
@@ -1431,7 +1431,8 @@ Optional Features:
--enable-sim-build-warnings
enable SIM specific build-time compiler warnings if
gcc is used
- --enable-sim-hardware=LIST Specify the hardware to be included in the build.
+ --enable-sim-hardware=LIST
+ Specify the hardware to be included in the build.
Optional Packages:
--with-PACKAGE[=ARG] use PACKAGE [ARG=yes]
@@ -12295,7 +12296,7 @@ else
lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2
lt_status=$lt_dlunknown
cat > conftest.$ac_ext <<_LT_EOF
-#line 12298 "configure"
+#line 12299 "configure"
#include "confdefs.h"
#if HAVE_DLFCN_H
@@ -12401,7 +12402,7 @@ else
lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2
lt_status=$lt_dlunknown
cat > conftest.$ac_ext <<_LT_EOF
-#line 12404 "configure"
+#line 12405 "configure"
#include "confdefs.h"
#if HAVE_DLFCN_H
@@ -13415,10 +13416,11 @@ fi
if test x"yes" != x"no"; then
- sim_hw_p=yes
+ enable_sim_hardware=yes
else
- sim_hw_p=no
+ enable_sim_hardware=no
fi
+
if test ""; then
hardware=""
else
@@ -13457,20 +13459,29 @@ hardware="$hardware \
bfin_wp \
eth_phy \
"
+
sim_hw_cflags="-DWITH_HW=1"
sim_hw="$hardware"
sim_hw_objs="\$(SIM_COMMON_HW_OBJS) `echo $sim_hw | sed -e 's/\([^ ][^ ]*\)/dv-\1.o/g'`"
+
# Check whether --enable-sim-hardware was given.
if test "${enable_sim_hardware+set}" = set; then :
enableval=$enable_sim_hardware;
-case "${enableval}" in
- yes) sim_hw_p=yes;;
- no) sim_hw_p=no;;
+fi
+
+case ${enable_sim_hardware} in
+ yes) sim_hw_p=yes;;
+ no) sim_hw_p=no;;
,*) sim_hw_p=yes; hardware="${hardware} `echo ${enableval} | sed -e 's/,/ /'`";;
*,) sim_hw_p=yes; hardware="`echo ${enableval} | sed -e 's/,/ /'` ${hardware}";;
- *) sim_hw_p=yes; hardware="`echo ${enableval} | sed -e 's/,/ /'`"'';;
+ *) sim_hw_p=yes; hardware="`echo ${enableval} | sed -e 's/,/ /'`"'';;
esac
+
if test "$sim_hw_p" != yes; then
+ if test "yes" = "always"; then
+ as_fn_error "Sorry, but this simulator requires that hardware support
+be enabled. Please configure without --disable-hw-support." "$LINENO" 5
+ fi
sim_hw_objs=
sim_hw_cflags="-DWITH_HW=0"
sim_hw=
@@ -13498,28 +13509,11 @@ _ACEOF
;;
esac
-fi
-if test x"$silent" != x"yes" && test "$sim_hw_p" = "yes"; then
- echo "Setting hardware to $sim_hw_cflags, $sim_hw, $sim_hw_objs"
-fi
-else
-
-if test "$sim_hw_p" != yes; then
- if test "yes" = "always"; then
- as_fn_error "Sorry, but this simulator requires that hardware support
-be enabled. Please configure without --disable-hw-support." "$LINENO" 5
+ if test x"$silent" != x"yes"; then
+ echo "Setting hardware to $sim_hw_cflags, $sim_hw, $sim_hw_objs"
fi
- sim_hw_objs=
- sim_hw_cflags="-DWITH_HW=0"
- sim_hw=
-fi
-if test x"$silent" != x"yes"; then
- echo "Setting hardware to $sim_hw_cflags, $sim_hw, $sim_hw_objs"
-fi
-fi
-
-case " $hardware " in
- *" cfi "*) { $as_echo "$as_me:${as_lineno-$LINENO}: checking for log2 in -lm" >&5
+ case " $hardware " in
+ *" cfi "*) { $as_echo "$as_me:${as_lineno-$LINENO}: checking for log2 in -lm" >&5
$as_echo_n "checking for log2 in -lm... " >&6; }
if test "${ac_cv_lib_m_log2+set}" = set; then :
$as_echo_n "(cached) " >&6
@@ -13564,7 +13558,8 @@ _ACEOF
fi
;;
-esac
+ esac
+fi
for ac_func in getuid getgid geteuid getegid setuid setgid mmap munmap kill pread
diff --git a/sim/common/ChangeLog b/sim/common/ChangeLog
index 9daab66..3056cce 100644
--- a/sim/common/ChangeLog
+++ b/sim/common/ChangeLog
@@ -1,3 +1,7 @@
+2013-03-26 Mike Frysinger <vapier@gentoo.org>
+
+ * acinclude.m4: Regenerate.
+
2013-03-23 Joel Sherrill <joel.sherrill@oarcorp.com>
* acinclude.m4: Add SIM_DV_SOCKSER_O which is empty on hosts
diff --git a/sim/common/acinclude.m4 b/sim/common/acinclude.m4
index 7f98903..73191f2 100644
--- a/sim/common/acinclude.m4
+++ b/sim/common/acinclude.m4
@@ -609,30 +609,38 @@ dnl arg[3] is a space separated list of extra target specific devices.
AC_DEFUN([SIM_AC_OPTION_HARDWARE],
[
if test x"[$1]" != x"no"; then
- sim_hw_p=yes
+ enable_sim_hardware=yes
else
- sim_hw_p=no
+ enable_sim_hardware=no
fi
+
if test "[$2]"; then
hardware="[$2]"
else
hardware="cfi core pal glue"
fi
hardware="$hardware [$3]"
+
sim_hw_cflags="-DWITH_HW=1"
sim_hw="$hardware"
sim_hw_objs="\$(SIM_COMMON_HW_OBJS) `echo $sim_hw | sed -e 's/\([[^ ]][[^ ]]*\)/dv-\1.o/g'`"
+
AC_ARG_ENABLE(sim-hardware,
-[ --enable-sim-hardware=LIST Specify the hardware to be included in the build.],
-[
-case "${enableval}" in
- yes) sim_hw_p=yes;;
- no) sim_hw_p=no;;
+ [AS_HELP_STRING([--enable-sim-hardware=LIST],
+ [Specify the hardware to be included in the build.])])
+case ${enable_sim_hardware} in
+ yes) sim_hw_p=yes;;
+ no) sim_hw_p=no;;
,*) sim_hw_p=yes; hardware="${hardware} `echo ${enableval} | sed -e 's/,/ /'`";;
*,) sim_hw_p=yes; hardware="`echo ${enableval} | sed -e 's/,/ /'` ${hardware}";;
- *) sim_hw_p=yes; hardware="`echo ${enableval} | sed -e 's/,/ /'`"'';;
+ *) sim_hw_p=yes; hardware="`echo ${enableval} | sed -e 's/,/ /'`"'';;
esac
+
if test "$sim_hw_p" != yes; then
+ if test "[$1]" = "always"; then
+ AC_MSG_ERROR([Sorry, but this simulator requires that hardware support
+be enabled. Please configure without --disable-hw-support.])
+ fi
sim_hw_objs=
sim_hw_cflags="-DWITH_HW=0"
sim_hw=
@@ -657,26 +665,14 @@ else
;;
esac
AC_SUBST(SIM_DV_SOCKSER_O)
-fi
-if test x"$silent" != x"yes" && test "$sim_hw_p" = "yes"; then
- echo "Setting hardware to $sim_hw_cflags, $sim_hw, $sim_hw_objs"
-fi],[
-if test "$sim_hw_p" != yes; then
- if test "[$1]" = "always"; then
- AC_MSG_ERROR([Sorry, but this simulator requires that hardware support
-be enabled. Please configure without --disable-hw-support.])
+ if test x"$silent" != x"yes"; then
+ echo "Setting hardware to $sim_hw_cflags, $sim_hw, $sim_hw_objs"
fi
- sim_hw_objs=
- sim_hw_cflags="-DWITH_HW=0"
- sim_hw=
+ dnl Some devices require extra libraries.
+ case " $hardware " in
+ *" cfi "*) AC_CHECK_LIB(m, log2);;
+ esac
fi
-if test x"$silent" != x"yes"; then
- echo "Setting hardware to $sim_hw_cflags, $sim_hw, $sim_hw_objs"
-fi])
-dnl Some devices require extra libraries.
-case " $hardware " in
- *" cfi "*) AC_CHECK_LIB(m, log2);;
-esac
])
AC_SUBST(sim_hw_cflags)
AC_SUBST(sim_hw_objs)
diff --git a/sim/cris/ChangeLog b/sim/cris/ChangeLog
index a14285c..9d051f9 100644
--- a/sim/cris/ChangeLog
+++ b/sim/cris/ChangeLog
@@ -1,3 +1,7 @@
+2013-03-26 Mike Frysinger <vapier@gentoo.org>
+
+ * configure: Regenerate.
+
2012-06-15 Joel Brobecker <brobecker@adacore.com>
* config.in, configure: Regenerate.
diff --git a/sim/cris/configure b/sim/cris/configure
index efdd4d9..23de4f7 100755
--- a/sim/cris/configure
+++ b/sim/cris/configure
@@ -604,6 +604,7 @@ cgen_breaks
cgen
cgendir
CGEN_MAINT
+SIM_DV_SOCKSER_O
REPORT_BUGS_TEXI
REPORT_BUGS_TO
PKGVERSION
@@ -1420,7 +1421,8 @@ Optional Features:
--enable-sim-build-warnings
enable SIM specific build-time compiler warnings if
gcc is used
- --enable-sim-hardware=LIST Specify the hardware to be included in the build.
+ --enable-sim-hardware=LIST
+ Specify the hardware to be included in the build.
--enable-sim-default-model=model Specify default model to simulate.
--enable-sim-environment=environment Specify mixed, user, virtual or operating environment.
--enable-sim-inline=inlines Specify which functions should be inlined.
@@ -12281,7 +12283,7 @@ else
lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2
lt_status=$lt_dlunknown
cat > conftest.$ac_ext <<_LT_EOF
-#line 12284 "configure"
+#line 12286 "configure"
#include "confdefs.h"
#if HAVE_DLFCN_H
@@ -12387,7 +12389,7 @@ else
lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2
lt_status=$lt_dlunknown
cat > conftest.$ac_ext <<_LT_EOF
-#line 12390 "configure"
+#line 12392 "configure"
#include "confdefs.h"
#if HAVE_DLFCN_H
@@ -13312,31 +13314,41 @@ $as_echo "${WARN_CFLAGS} ${WERROR_CFLAGS}" >&6; }
fi
-if test x"no" = x"yes"; then
- sim_hw_p=yes
+if test x"no" != x"no"; then
+ enable_sim_hardware=yes
else
- sim_hw_p=no
+ enable_sim_hardware=no
fi
+
if test ""; then
hardware=""
else
hardware="cfi core pal glue"
fi
hardware="$hardware rv cris"
+
sim_hw_cflags="-DWITH_HW=1"
sim_hw="$hardware"
sim_hw_objs="\$(SIM_COMMON_HW_OBJS) `echo $sim_hw | sed -e 's/\([^ ][^ ]*\)/dv-\1.o/g'`"
+
# Check whether --enable-sim-hardware was given.
if test "${enable_sim_hardware+set}" = set; then :
enableval=$enable_sim_hardware;
-case "${enableval}" in
- yes) sim_hw_p=yes;;
- no) sim_hw_p=no;;
+fi
+
+case ${enable_sim_hardware} in
+ yes) sim_hw_p=yes;;
+ no) sim_hw_p=no;;
,*) sim_hw_p=yes; hardware="${hardware} `echo ${enableval} | sed -e 's/,/ /'`";;
*,) sim_hw_p=yes; hardware="`echo ${enableval} | sed -e 's/,/ /'` ${hardware}";;
- *) sim_hw_p=yes; hardware="`echo ${enableval} | sed -e 's/,/ /'`"'';;
+ *) sim_hw_p=yes; hardware="`echo ${enableval} | sed -e 's/,/ /'`"'';;
esac
+
if test "$sim_hw_p" != yes; then
+ if test "no" = "always"; then
+ as_fn_error "Sorry, but this simulator requires that hardware support
+be enabled. Please configure without --disable-hw-support." "$LINENO" 5
+ fi
sim_hw_objs=
sim_hw_cflags="-DWITH_HW=0"
sim_hw=
@@ -13351,24 +13363,24 @@ else
*) sim_hw="$sim_hw $i" ; sim_hw_objs="$sim_hw_objs dv-$i.o";;
esac
done
-fi
-if test x"$silent" != x"yes" && test "$sim_hw_p" = "yes"; then
- echo "Setting hardware to $sim_hw_cflags, $sim_hw, $sim_hw_objs"
-fi
-else
+ # mingw does not support sockser
+ SIM_DV_SOCKSER_O=""
+ case ${host} in
+ *mingw*) ;;
+ *) SIM_DV_SOCKSER_O="dv-sockser.o"
-if test "$sim_hw_p" != yes; then
- sim_hw_objs=
- sim_hw_cflags="-DWITH_HW=0"
- sim_hw=
-fi
-if test x"$silent" != x"yes"; then
- echo "Setting hardware to $sim_hw_cflags, $sim_hw, $sim_hw_objs"
-fi
-fi
+cat >>confdefs.h <<_ACEOF
+#define HAVE_DV_SOCKSER 1
+_ACEOF
-case " $hardware " in
- *" cfi "*) { $as_echo "$as_me:${as_lineno-$LINENO}: checking for log2 in -lm" >&5
+ ;;
+ esac
+
+ if test x"$silent" != x"yes"; then
+ echo "Setting hardware to $sim_hw_cflags, $sim_hw, $sim_hw_objs"
+ fi
+ case " $hardware " in
+ *" cfi "*) { $as_echo "$as_me:${as_lineno-$LINENO}: checking for log2 in -lm" >&5
$as_echo_n "checking for log2 in -lm... " >&6; }
if test "${ac_cv_lib_m_log2+set}" = set; then :
$as_echo_n "(cached) " >&6
@@ -13413,7 +13425,8 @@ _ACEOF
fi
;;
-esac
+ esac
+fi
# The default model shouldn't matter as long as there's a BFD.
diff --git a/sim/frv/ChangeLog b/sim/frv/ChangeLog
index 0dded85..820c17f 100644
--- a/sim/frv/ChangeLog
+++ b/sim/frv/ChangeLog
@@ -1,3 +1,7 @@
+2013-03-26 Mike Frysinger <vapier@gentoo.org>
+
+ * configure: Regenerate.
+
2013-03-23 Joel Sherrill <joel.sherrill@oarcorp.com>
* configure.ac: Fail if dv-sockser.o not available.
diff --git a/sim/frv/configure b/sim/frv/configure
index 297873a..aa41286 100755
--- a/sim/frv/configure
+++ b/sim/frv/configure
@@ -1420,7 +1420,8 @@ Optional Features:
--enable-sim-environment=environment Specify mixed, user, virtual or operating environment.
--enable-cgen-maint=DIR build cgen generated files
--enable-sim-trapdump Make unknown traps dump the registers
- --enable-sim-hardware=LIST Specify the hardware to be included in the build.
+ --enable-sim-hardware=LIST
+ Specify the hardware to be included in the build.
Optional Packages:
--with-PACKAGE[=ARG] use PACKAGE [ARG=yes]
@@ -12277,7 +12278,7 @@ else
lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2
lt_status=$lt_dlunknown
cat > conftest.$ac_ext <<_LT_EOF
-#line 12280 "configure"
+#line 12281 "configure"
#include "confdefs.h"
#if HAVE_DLFCN_H
@@ -12383,7 +12384,7 @@ else
lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2
lt_status=$lt_dlunknown
cat > conftest.$ac_ext <<_LT_EOF
-#line 12386 "configure"
+#line 12387 "configure"
#include "confdefs.h"
#if HAVE_DLFCN_H
@@ -13314,30 +13315,40 @@ fi
if test x"always" != x"no"; then
- sim_hw_p=yes
+ enable_sim_hardware=yes
else
- sim_hw_p=no
+ enable_sim_hardware=no
fi
+
if test """"; then
hardware=""""
else
hardware="cfi core pal glue"
fi
hardware="$hardware """
+
sim_hw_cflags="-DWITH_HW=1"
sim_hw="$hardware"
sim_hw_objs="\$(SIM_COMMON_HW_OBJS) `echo $sim_hw | sed -e 's/\([^ ][^ ]*\)/dv-\1.o/g'`"
+
# Check whether --enable-sim-hardware was given.
if test "${enable_sim_hardware+set}" = set; then :
enableval=$enable_sim_hardware;
-case "${enableval}" in
- yes) sim_hw_p=yes;;
- no) sim_hw_p=no;;
+fi
+
+case ${enable_sim_hardware} in
+ yes) sim_hw_p=yes;;
+ no) sim_hw_p=no;;
,*) sim_hw_p=yes; hardware="${hardware} `echo ${enableval} | sed -e 's/,/ /'`";;
*,) sim_hw_p=yes; hardware="`echo ${enableval} | sed -e 's/,/ /'` ${hardware}";;
- *) sim_hw_p=yes; hardware="`echo ${enableval} | sed -e 's/,/ /'`"'';;
+ *) sim_hw_p=yes; hardware="`echo ${enableval} | sed -e 's/,/ /'`"'';;
esac
+
if test "$sim_hw_p" != yes; then
+ if test "always" = "always"; then
+ as_fn_error "Sorry, but this simulator requires that hardware support
+be enabled. Please configure without --disable-hw-support." "$LINENO" 5
+ fi
sim_hw_objs=
sim_hw_cflags="-DWITH_HW=0"
sim_hw=
@@ -13365,28 +13376,11 @@ _ACEOF
;;
esac
-fi
-if test x"$silent" != x"yes" && test "$sim_hw_p" = "yes"; then
- echo "Setting hardware to $sim_hw_cflags, $sim_hw, $sim_hw_objs"
-fi
-else
-
-if test "$sim_hw_p" != yes; then
- if test "always" = "always"; then
- as_fn_error "Sorry, but this simulator requires that hardware support
-be enabled. Please configure without --disable-hw-support." "$LINENO" 5
+ if test x"$silent" != x"yes"; then
+ echo "Setting hardware to $sim_hw_cflags, $sim_hw, $sim_hw_objs"
fi
- sim_hw_objs=
- sim_hw_cflags="-DWITH_HW=0"
- sim_hw=
-fi
-if test x"$silent" != x"yes"; then
- echo "Setting hardware to $sim_hw_cflags, $sim_hw, $sim_hw_objs"
-fi
-fi
-
-case " $hardware " in
- *" cfi "*) { $as_echo "$as_me:${as_lineno-$LINENO}: checking for log2 in -lm" >&5
+ case " $hardware " in
+ *" cfi "*) { $as_echo "$as_me:${as_lineno-$LINENO}: checking for log2 in -lm" >&5
$as_echo_n "checking for log2 in -lm... " >&6; }
if test "${ac_cv_lib_m_log2+set}" = set; then :
$as_echo_n "(cached) " >&6
@@ -13431,7 +13425,8 @@ _ACEOF
fi
;;
-esac
+ esac
+fi
if test -z "$SIM_DV_SOCKSER_O"; then
diff --git a/sim/iq2000/ChangeLog b/sim/iq2000/ChangeLog
index b22b4f4..d25c4b8 100644
--- a/sim/iq2000/ChangeLog
+++ b/sim/iq2000/ChangeLog
@@ -1,3 +1,7 @@
+2013-03-26 Mike Frysinger <vapier@gentoo.org>
+
+ * configure: Regenerate.
+
2013-03-23 Joel Sherrill <joel.sherrill@oarcorp.com>
* configure.ac: Fail if dv-sockser.o not available.
diff --git a/sim/iq2000/configure b/sim/iq2000/configure
index 7eda691..34aa992 100755
--- a/sim/iq2000/configure
+++ b/sim/iq2000/configure
@@ -1419,7 +1419,8 @@ Optional Features:
--enable-sim-environment=environment Specify mixed, user, virtual or operating environment.
--enable-sim-inline=inlines Specify which functions should be inlined.
--enable-cgen-maint=DIR build cgen generated files
- --enable-sim-hardware=LIST Specify the hardware to be included in the build.
+ --enable-sim-hardware=LIST
+ Specify the hardware to be included in the build.
Optional Packages:
--with-PACKAGE[=ARG] use PACKAGE [ARG=yes]
@@ -12276,7 +12277,7 @@ else
lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2
lt_status=$lt_dlunknown
cat > conftest.$ac_ext <<_LT_EOF
-#line 12279 "configure"
+#line 12280 "configure"
#include "confdefs.h"
#if HAVE_DLFCN_H
@@ -12382,7 +12383,7 @@ else
lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2
lt_status=$lt_dlunknown
cat > conftest.$ac_ext <<_LT_EOF
-#line 12385 "configure"
+#line 12386 "configure"
#include "confdefs.h"
#if HAVE_DLFCN_H
@@ -13339,30 +13340,40 @@ fi
if test x"always" != x"no"; then
- sim_hw_p=yes
+ enable_sim_hardware=yes
else
- sim_hw_p=no
+ enable_sim_hardware=no
fi
+
if test """"; then
hardware=""""
else
hardware="cfi core pal glue"
fi
hardware="$hardware """
+
sim_hw_cflags="-DWITH_HW=1"
sim_hw="$hardware"
sim_hw_objs="\$(SIM_COMMON_HW_OBJS) `echo $sim_hw | sed -e 's/\([^ ][^ ]*\)/dv-\1.o/g'`"
+
# Check whether --enable-sim-hardware was given.
if test "${enable_sim_hardware+set}" = set; then :
enableval=$enable_sim_hardware;
-case "${enableval}" in
- yes) sim_hw_p=yes;;
- no) sim_hw_p=no;;
+fi
+
+case ${enable_sim_hardware} in
+ yes) sim_hw_p=yes;;
+ no) sim_hw_p=no;;
,*) sim_hw_p=yes; hardware="${hardware} `echo ${enableval} | sed -e 's/,/ /'`";;
*,) sim_hw_p=yes; hardware="`echo ${enableval} | sed -e 's/,/ /'` ${hardware}";;
- *) sim_hw_p=yes; hardware="`echo ${enableval} | sed -e 's/,/ /'`"'';;
+ *) sim_hw_p=yes; hardware="`echo ${enableval} | sed -e 's/,/ /'`"'';;
esac
+
if test "$sim_hw_p" != yes; then
+ if test "always" = "always"; then
+ as_fn_error "Sorry, but this simulator requires that hardware support
+be enabled. Please configure without --disable-hw-support." "$LINENO" 5
+ fi
sim_hw_objs=
sim_hw_cflags="-DWITH_HW=0"
sim_hw=
@@ -13390,28 +13401,11 @@ _ACEOF
;;
esac
-fi
-if test x"$silent" != x"yes" && test "$sim_hw_p" = "yes"; then
- echo "Setting hardware to $sim_hw_cflags, $sim_hw, $sim_hw_objs"
-fi
-else
-
-if test "$sim_hw_p" != yes; then
- if test "always" = "always"; then
- as_fn_error "Sorry, but this simulator requires that hardware support
-be enabled. Please configure without --disable-hw-support." "$LINENO" 5
+ if test x"$silent" != x"yes"; then
+ echo "Setting hardware to $sim_hw_cflags, $sim_hw, $sim_hw_objs"
fi
- sim_hw_objs=
- sim_hw_cflags="-DWITH_HW=0"
- sim_hw=
-fi
-if test x"$silent" != x"yes"; then
- echo "Setting hardware to $sim_hw_cflags, $sim_hw, $sim_hw_objs"
-fi
-fi
-
-case " $hardware " in
- *" cfi "*) { $as_echo "$as_me:${as_lineno-$LINENO}: checking for log2 in -lm" >&5
+ case " $hardware " in
+ *" cfi "*) { $as_echo "$as_me:${as_lineno-$LINENO}: checking for log2 in -lm" >&5
$as_echo_n "checking for log2 in -lm... " >&6; }
if test "${ac_cv_lib_m_log2+set}" = set; then :
$as_echo_n "(cached) " >&6
@@ -13456,7 +13450,8 @@ _ACEOF
fi
;;
-esac
+ esac
+fi
if test -z "$SIM_DV_SOCKSER_O"; then
diff --git a/sim/lm32/ChangeLog b/sim/lm32/ChangeLog
index df256ec..d185113 100755
--- a/sim/lm32/ChangeLog
+++ b/sim/lm32/ChangeLog
@@ -1,3 +1,7 @@
+2013-03-26 Mike Frysinger <vapier@gentoo.org>
+
+ * configure: Regenerate.
+
2012-06-15 Joel Brobecker <brobecker@adacore.com>
* config.in, configure: Regenerate.
diff --git a/sim/lm32/configure b/sim/lm32/configure
index 2159228..97dc4b8 100755
--- a/sim/lm32/configure
+++ b/sim/lm32/configure
@@ -601,6 +601,7 @@ ac_includes_default="\
ac_subst_vars='LTLIBOBJS
LIBOBJS
cgen_breaks
+SIM_DV_SOCKSER_O
cgen
cgendir
CGEN_MAINT
@@ -1416,7 +1417,8 @@ Optional Features:
--enable-sim-default-model=model Specify default model to simulate.
--enable-sim-environment=environment Specify mixed, user, virtual or operating environment.
--enable-cgen-maint=DIR build cgen generated files
- --enable-sim-hardware=LIST Specify the hardware to be included in the build.
+ --enable-sim-hardware=LIST
+ Specify the hardware to be included in the build.
Optional Packages:
--with-PACKAGE[=ARG] use PACKAGE [ARG=yes]
@@ -12273,7 +12275,7 @@ else
lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2
lt_status=$lt_dlunknown
cat > conftest.$ac_ext <<_LT_EOF
-#line 12276 "configure"
+#line 12278 "configure"
#include "confdefs.h"
#if HAVE_DLFCN_H
@@ -12379,7 +12381,7 @@ else
lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2
lt_status=$lt_dlunknown
cat > conftest.$ac_ext <<_LT_EOF
-#line 12382 "configure"
+#line 12384 "configure"
#include "confdefs.h"
#if HAVE_DLFCN_H
@@ -13290,31 +13292,41 @@ fi
-if test x"yes" = x"yes"; then
- sim_hw_p=yes
+if test x"yes" != x"no"; then
+ enable_sim_hardware=yes
else
- sim_hw_p=no
+ enable_sim_hardware=no
fi
+
if test ""; then
hardware=""
else
hardware="cfi core pal glue"
fi
hardware="$hardware lm32cpu lm32timer lm32uart"
+
sim_hw_cflags="-DWITH_HW=1"
sim_hw="$hardware"
sim_hw_objs="\$(SIM_COMMON_HW_OBJS) `echo $sim_hw | sed -e 's/\([^ ][^ ]*\)/dv-\1.o/g'`"
+
# Check whether --enable-sim-hardware was given.
if test "${enable_sim_hardware+set}" = set; then :
enableval=$enable_sim_hardware;
-case "${enableval}" in
- yes) sim_hw_p=yes;;
- no) sim_hw_p=no;;
+fi
+
+case ${enable_sim_hardware} in
+ yes) sim_hw_p=yes;;
+ no) sim_hw_p=no;;
,*) sim_hw_p=yes; hardware="${hardware} `echo ${enableval} | sed -e 's/,/ /'`";;
*,) sim_hw_p=yes; hardware="`echo ${enableval} | sed -e 's/,/ /'` ${hardware}";;
- *) sim_hw_p=yes; hardware="`echo ${enableval} | sed -e 's/,/ /'`"'';;
+ *) sim_hw_p=yes; hardware="`echo ${enableval} | sed -e 's/,/ /'`"'';;
esac
+
if test "$sim_hw_p" != yes; then
+ if test "yes" = "always"; then
+ as_fn_error "Sorry, but this simulator requires that hardware support
+be enabled. Please configure without --disable-hw-support." "$LINENO" 5
+ fi
sim_hw_objs=
sim_hw_cflags="-DWITH_HW=0"
sim_hw=
@@ -13329,24 +13341,24 @@ else
*) sim_hw="$sim_hw $i" ; sim_hw_objs="$sim_hw_objs dv-$i.o";;
esac
done
-fi
-if test x"$silent" != x"yes" && test "$sim_hw_p" = "yes"; then
- echo "Setting hardware to $sim_hw_cflags, $sim_hw, $sim_hw_objs"
-fi
-else
+ # mingw does not support sockser
+ SIM_DV_SOCKSER_O=""
+ case ${host} in
+ *mingw*) ;;
+ *) SIM_DV_SOCKSER_O="dv-sockser.o"
-if test "$sim_hw_p" != yes; then
- sim_hw_objs=
- sim_hw_cflags="-DWITH_HW=0"
- sim_hw=
-fi
-if test x"$silent" != x"yes"; then
- echo "Setting hardware to $sim_hw_cflags, $sim_hw, $sim_hw_objs"
-fi
-fi
+cat >>confdefs.h <<_ACEOF
+#define HAVE_DV_SOCKSER 1
+_ACEOF
-case " $hardware " in
- *" cfi "*) { $as_echo "$as_me:${as_lineno-$LINENO}: checking for log2 in -lm" >&5
+ ;;
+ esac
+
+ if test x"$silent" != x"yes"; then
+ echo "Setting hardware to $sim_hw_cflags, $sim_hw, $sim_hw_objs"
+ fi
+ case " $hardware " in
+ *" cfi "*) { $as_echo "$as_me:${as_lineno-$LINENO}: checking for log2 in -lm" >&5
$as_echo_n "checking for log2 in -lm... " >&6; }
if test "${ac_cv_lib_m_log2+set}" = set; then :
$as_echo_n "(cached) " >&6
@@ -13391,7 +13403,8 @@ _ACEOF
fi
;;
-esac
+ esac
+fi
diff --git a/sim/m32r/ChangeLog b/sim/m32r/ChangeLog
index 173993f..4e55722 100644
--- a/sim/m32r/ChangeLog
+++ b/sim/m32r/ChangeLog
@@ -1,3 +1,7 @@
+2013-03-26 Mike Frysinger <vapier@gentoo.org>
+
+ * configure: Regenerate.
+
2013-03-23 Joel Sherrill <joel.sherrill@oarcorp.com>
* configure.ac: Fail if dv-sockser.o not available.
diff --git a/sim/m32r/configure b/sim/m32r/configure
index cfa7bae..376acfb 100755
--- a/sim/m32r/configure
+++ b/sim/m32r/configure
@@ -1421,7 +1421,8 @@ Optional Features:
--enable-sim-environment=environment Specify mixed, user, virtual or operating environment.
--enable-sim-inline=inlines Specify which functions should be inlined.
--enable-cgen-maint=DIR build cgen generated files
- --enable-sim-hardware=LIST Specify the hardware to be included in the build.
+ --enable-sim-hardware=LIST
+ Specify the hardware to be included in the build.
Optional Packages:
--with-PACKAGE[=ARG] use PACKAGE [ARG=yes]
@@ -12278,7 +12279,7 @@ else
lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2
lt_status=$lt_dlunknown
cat > conftest.$ac_ext <<_LT_EOF
-#line 12281 "configure"
+#line 12282 "configure"
#include "confdefs.h"
#if HAVE_DLFCN_H
@@ -12384,7 +12385,7 @@ else
lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2
lt_status=$lt_dlunknown
cat > conftest.$ac_ext <<_LT_EOF
-#line 12387 "configure"
+#line 12388 "configure"
#include "confdefs.h"
#if HAVE_DLFCN_H
@@ -13354,30 +13355,40 @@ fi
if test x"always" != x"no"; then
- sim_hw_p=yes
+ enable_sim_hardware=yes
else
- sim_hw_p=no
+ enable_sim_hardware=no
fi
+
if test """"; then
hardware=""""
else
hardware="cfi core pal glue"
fi
hardware="$hardware """
+
sim_hw_cflags="-DWITH_HW=1"
sim_hw="$hardware"
sim_hw_objs="\$(SIM_COMMON_HW_OBJS) `echo $sim_hw | sed -e 's/\([^ ][^ ]*\)/dv-\1.o/g'`"
+
# Check whether --enable-sim-hardware was given.
if test "${enable_sim_hardware+set}" = set; then :
enableval=$enable_sim_hardware;
-case "${enableval}" in
- yes) sim_hw_p=yes;;
- no) sim_hw_p=no;;
+fi
+
+case ${enable_sim_hardware} in
+ yes) sim_hw_p=yes;;
+ no) sim_hw_p=no;;
,*) sim_hw_p=yes; hardware="${hardware} `echo ${enableval} | sed -e 's/,/ /'`";;
*,) sim_hw_p=yes; hardware="`echo ${enableval} | sed -e 's/,/ /'` ${hardware}";;
- *) sim_hw_p=yes; hardware="`echo ${enableval} | sed -e 's/,/ /'`"'';;
+ *) sim_hw_p=yes; hardware="`echo ${enableval} | sed -e 's/,/ /'`"'';;
esac
+
if test "$sim_hw_p" != yes; then
+ if test "always" = "always"; then
+ as_fn_error "Sorry, but this simulator requires that hardware support
+be enabled. Please configure without --disable-hw-support." "$LINENO" 5
+ fi
sim_hw_objs=
sim_hw_cflags="-DWITH_HW=0"
sim_hw=
@@ -13405,28 +13416,11 @@ _ACEOF
;;
esac
-fi
-if test x"$silent" != x"yes" && test "$sim_hw_p" = "yes"; then
- echo "Setting hardware to $sim_hw_cflags, $sim_hw, $sim_hw_objs"
-fi
-else
-
-if test "$sim_hw_p" != yes; then
- if test "always" = "always"; then
- as_fn_error "Sorry, but this simulator requires that hardware support
-be enabled. Please configure without --disable-hw-support." "$LINENO" 5
+ if test x"$silent" != x"yes"; then
+ echo "Setting hardware to $sim_hw_cflags, $sim_hw, $sim_hw_objs"
fi
- sim_hw_objs=
- sim_hw_cflags="-DWITH_HW=0"
- sim_hw=
-fi
-if test x"$silent" != x"yes"; then
- echo "Setting hardware to $sim_hw_cflags, $sim_hw, $sim_hw_objs"
-fi
-fi
-
-case " $hardware " in
- *" cfi "*) { $as_echo "$as_me:${as_lineno-$LINENO}: checking for log2 in -lm" >&5
+ case " $hardware " in
+ *" cfi "*) { $as_echo "$as_me:${as_lineno-$LINENO}: checking for log2 in -lm" >&5
$as_echo_n "checking for log2 in -lm... " >&6; }
if test "${ac_cv_lib_m_log2+set}" = set; then :
$as_echo_n "(cached) " >&6
@@ -13471,7 +13465,8 @@ _ACEOF
fi
;;
-esac
+ esac
+fi
if test -z "$SIM_DV_SOCKSER_O"; then
diff --git a/sim/m68hc11/ChangeLog b/sim/m68hc11/ChangeLog
index 62ddd69..cda3be6 100644
--- a/sim/m68hc11/ChangeLog
+++ b/sim/m68hc11/ChangeLog
@@ -1,3 +1,7 @@
+2013-03-26 Mike Frysinger <vapier@gentoo.org>
+
+ * configure: Regenerate.
+
2013-03-23 Joel Sherrill <joel.sherrill@oarcorp.com>
* configure.ac: Use $SIM_DV_SOCKSER_O.
diff --git a/sim/m68hc11/configure b/sim/m68hc11/configure
index cb6c81d..819c756 100755
--- a/sim/m68hc11/configure
+++ b/sim/m68hc11/configure
@@ -602,6 +602,7 @@ ac_subst_vars='LTLIBOBJS
LIBOBJS
cgen_breaks
m68hc11_extra_objs
+SIM_DV_SOCKSER_O
REPORT_BUGS_TEXI
REPORT_BUGS_TO
PKGVERSION
@@ -1414,7 +1415,8 @@ Optional Features:
--enable-sim-build-warnings
enable SIM specific build-time compiler warnings if
gcc is used
- --enable-sim-hardware=LIST Specify the hardware to be included in the build.
+ --enable-sim-hardware=LIST
+ Specify the hardware to be included in the build.
Optional Packages:
--with-PACKAGE[=ARG] use PACKAGE [ARG=yes]
@@ -12271,7 +12273,7 @@ else
lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2
lt_status=$lt_dlunknown
cat > conftest.$ac_ext <<_LT_EOF
-#line 12274 "configure"
+#line 12276 "configure"
#include "confdefs.h"
#if HAVE_DLFCN_H
@@ -12377,7 +12379,7 @@ else
lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2
lt_status=$lt_dlunknown
cat > conftest.$ac_ext <<_LT_EOF
-#line 12380 "configure"
+#line 12382 "configure"
#include "confdefs.h"
#if HAVE_DLFCN_H
@@ -13319,7 +13321,6 @@ case "${target}" in
m68hc11-*-*|m6811-*-*)
hw_enabled=yes
hw_extra_devices="m68hc11 m68hc11sio m68hc11eepr m68hc11tim m68hc11spi nvram"
- m68hc11_extra_objs="dv-sockser.o"
SIM_SUBTARGET="$SIM_SUBTARGET -DTARGET_M68HC11=1"
;;
*)
@@ -13327,31 +13328,41 @@ case "${target}" in
;;
esac
-if test x"$hw_enabled" = x"yes"; then
- sim_hw_p=yes
+if test x"$hw_enabled" != x"no"; then
+ enable_sim_hardware=yes
else
- sim_hw_p=no
+ enable_sim_hardware=no
fi
+
if test "$hw_devices"; then
hardware="$hw_devices"
else
hardware="cfi core pal glue"
fi
hardware="$hardware $hw_extra_devices"
+
sim_hw_cflags="-DWITH_HW=1"
sim_hw="$hardware"
sim_hw_objs="\$(SIM_COMMON_HW_OBJS) `echo $sim_hw | sed -e 's/\([^ ][^ ]*\)/dv-\1.o/g'`"
+
# Check whether --enable-sim-hardware was given.
if test "${enable_sim_hardware+set}" = set; then :
enableval=$enable_sim_hardware;
-case "${enableval}" in
- yes) sim_hw_p=yes;;
- no) sim_hw_p=no;;
+fi
+
+case ${enable_sim_hardware} in
+ yes) sim_hw_p=yes;;
+ no) sim_hw_p=no;;
,*) sim_hw_p=yes; hardware="${hardware} `echo ${enableval} | sed -e 's/,/ /'`";;
*,) sim_hw_p=yes; hardware="`echo ${enableval} | sed -e 's/,/ /'` ${hardware}";;
- *) sim_hw_p=yes; hardware="`echo ${enableval} | sed -e 's/,/ /'`"'';;
+ *) sim_hw_p=yes; hardware="`echo ${enableval} | sed -e 's/,/ /'`"'';;
esac
+
if test "$sim_hw_p" != yes; then
+ if test "$hw_enabled" = "always"; then
+ as_fn_error "Sorry, but this simulator requires that hardware support
+be enabled. Please configure without --disable-hw-support." "$LINENO" 5
+ fi
sim_hw_objs=
sim_hw_cflags="-DWITH_HW=0"
sim_hw=
@@ -13366,24 +13377,24 @@ else
*) sim_hw="$sim_hw $i" ; sim_hw_objs="$sim_hw_objs dv-$i.o";;
esac
done
-fi
-if test x"$silent" != x"yes" && test "$sim_hw_p" = "yes"; then
- echo "Setting hardware to $sim_hw_cflags, $sim_hw, $sim_hw_objs"
-fi
-else
+ # mingw does not support sockser
+ SIM_DV_SOCKSER_O=""
+ case ${host} in
+ *mingw*) ;;
+ *) SIM_DV_SOCKSER_O="dv-sockser.o"
-if test "$sim_hw_p" != yes; then
- sim_hw_objs=
- sim_hw_cflags="-DWITH_HW=0"
- sim_hw=
-fi
-if test x"$silent" != x"yes"; then
- echo "Setting hardware to $sim_hw_cflags, $sim_hw, $sim_hw_objs"
-fi
-fi
+cat >>confdefs.h <<_ACEOF
+#define HAVE_DV_SOCKSER 1
+_ACEOF
-case " $hardware " in
- *" cfi "*) { $as_echo "$as_me:${as_lineno-$LINENO}: checking for log2 in -lm" >&5
+ ;;
+ esac
+
+ if test x"$silent" != x"yes"; then
+ echo "Setting hardware to $sim_hw_cflags, $sim_hw, $sim_hw_objs"
+ fi
+ case " $hardware " in
+ *" cfi "*) { $as_echo "$as_me:${as_lineno-$LINENO}: checking for log2 in -lm" >&5
$as_echo_n "checking for log2 in -lm... " >&6; }
if test "${ac_cv_lib_m_log2+set}" = set; then :
$as_echo_n "(cached) " >&6
@@ -13428,7 +13439,8 @@ _ACEOF
fi
;;
-esac
+ esac
+fi
for ac_header in string.h strings.h stdlib.h stdlib.h fcntl.h
@@ -13446,6 +13458,7 @@ fi
done
+m68hc11_extra_objs="$SIM_DV_SOCKSER_O"
diff --git a/sim/mips/ChangeLog b/sim/mips/ChangeLog
index 7d91efe..09a9a5d 100644
--- a/sim/mips/ChangeLog
+++ b/sim/mips/ChangeLog
@@ -1,3 +1,7 @@
+2013-03-26 Mike Frysinger <vapier@gentoo.org>
+
+ * configure: Regenerate.
+
2013-03-23 Joel Sherrill <joel.sherrill@oarcorp.com>
* configure.ac: Address use of dv-sockser.o.
diff --git a/sim/mips/configure b/sim/mips/configure
index 38ebfbd..92097d8 100755
--- a/sim/mips/configure
+++ b/sim/mips/configure
@@ -1442,7 +1442,8 @@ Optional Features:
--enable-sim-bitsize=N Specify target bitsize (32 or 64).
--enable-sim-float Specify that the target processor has floating point hardware.
--enable-sim-smp=n Specify number of processors to configure for (default ${default_sim_smp}).
- --enable-sim-hardware=LIST Specify the hardware to be included in the build.
+ --enable-sim-hardware=LIST
+ Specify the hardware to be included in the build.
Optional Packages:
--with-PACKAGE[=ARG] use PACKAGE [ARG=yes]
@@ -12301,7 +12302,7 @@ else
lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2
lt_status=$lt_dlunknown
cat > conftest.$ac_ext <<_LT_EOF
-#line 12304 "configure"
+#line 12305 "configure"
#include "confdefs.h"
#if HAVE_DLFCN_H
@@ -12407,7 +12408,7 @@ else
lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2
lt_status=$lt_dlunknown
cat > conftest.$ac_ext <<_LT_EOF
-#line 12410 "configure"
+#line 12411 "configure"
#include "confdefs.h"
#if HAVE_DLFCN_H
@@ -13911,30 +13912,40 @@ case "${target}" in
esac
if test x"$hw_enabled" != x"no"; then
- sim_hw_p=yes
+ enable_sim_hardware=yes
else
- sim_hw_p=no
+ enable_sim_hardware=no
fi
+
if test "$hw_devices"; then
hardware="$hw_devices"
else
hardware="cfi core pal glue"
fi
hardware="$hardware $hw_extra_devices"
+
sim_hw_cflags="-DWITH_HW=1"
sim_hw="$hardware"
sim_hw_objs="\$(SIM_COMMON_HW_OBJS) `echo $sim_hw | sed -e 's/\([^ ][^ ]*\)/dv-\1.o/g'`"
+
# Check whether --enable-sim-hardware was given.
if test "${enable_sim_hardware+set}" = set; then :
enableval=$enable_sim_hardware;
-case "${enableval}" in
- yes) sim_hw_p=yes;;
- no) sim_hw_p=no;;
+fi
+
+case ${enable_sim_hardware} in
+ yes) sim_hw_p=yes;;
+ no) sim_hw_p=no;;
,*) sim_hw_p=yes; hardware="${hardware} `echo ${enableval} | sed -e 's/,/ /'`";;
*,) sim_hw_p=yes; hardware="`echo ${enableval} | sed -e 's/,/ /'` ${hardware}";;
- *) sim_hw_p=yes; hardware="`echo ${enableval} | sed -e 's/,/ /'`"'';;
+ *) sim_hw_p=yes; hardware="`echo ${enableval} | sed -e 's/,/ /'`"'';;
esac
+
if test "$sim_hw_p" != yes; then
+ if test "$hw_enabled" = "always"; then
+ as_fn_error "Sorry, but this simulator requires that hardware support
+be enabled. Please configure without --disable-hw-support." "$LINENO" 5
+ fi
sim_hw_objs=
sim_hw_cflags="-DWITH_HW=0"
sim_hw=
@@ -13962,28 +13973,11 @@ _ACEOF
;;
esac
-fi
-if test x"$silent" != x"yes" && test "$sim_hw_p" = "yes"; then
- echo "Setting hardware to $sim_hw_cflags, $sim_hw, $sim_hw_objs"
-fi
-else
-
-if test "$sim_hw_p" != yes; then
- if test "$hw_enabled" = "always"; then
- as_fn_error "Sorry, but this simulator requires that hardware support
-be enabled. Please configure without --disable-hw-support." "$LINENO" 5
+ if test x"$silent" != x"yes"; then
+ echo "Setting hardware to $sim_hw_cflags, $sim_hw, $sim_hw_objs"
fi
- sim_hw_objs=
- sim_hw_cflags="-DWITH_HW=0"
- sim_hw=
-fi
-if test x"$silent" != x"yes"; then
- echo "Setting hardware to $sim_hw_cflags, $sim_hw, $sim_hw_objs"
-fi
-fi
-
-case " $hardware " in
- *" cfi "*) { $as_echo "$as_me:${as_lineno-$LINENO}: checking for log2 in -lm" >&5
+ case " $hardware " in
+ *" cfi "*) { $as_echo "$as_me:${as_lineno-$LINENO}: checking for log2 in -lm" >&5
$as_echo_n "checking for log2 in -lm... " >&6; }
if test "${ac_cv_lib_m_log2+set}" = set; then :
$as_echo_n "(cached) " >&6
@@ -14028,7 +14022,8 @@ _ACEOF
fi
;;
-esac
+ esac
+fi
mips_extra_objs="$SIM_DV_SOCKSER_O"
diff --git a/sim/mn10300/ChangeLog b/sim/mn10300/ChangeLog
index 0ee66b9..e2d0245 100644
--- a/sim/mn10300/ChangeLog
+++ b/sim/mn10300/ChangeLog
@@ -1,3 +1,7 @@
+2013-03-26 Mike Frysinger <vapier@gentoo.org>
+
+ * configure: Regenerate.
+
2013-03-23 Joel Sherrill <joel.sherrill@oarcorp.com>
* configure.ac: Fail if dv-sockser.o not available.
diff --git a/sim/mn10300/configure b/sim/mn10300/configure
index 31ee925..9cef805 100755
--- a/sim/mn10300/configure
+++ b/sim/mn10300/configure
@@ -1420,7 +1420,8 @@ Optional Features:
--enable-sim-reserved-bits Specify whether to check reserved bits in instruction.
--enable-sim-bitsize=N Specify target bitsize (32 or 64).
--enable-sim-inline=inlines Specify which functions should be inlined.
- --enable-sim-hardware=LIST Specify the hardware to be included in the build.
+ --enable-sim-hardware=LIST
+ Specify the hardware to be included in the build.
Optional Packages:
--with-PACKAGE[=ARG] use PACKAGE [ARG=yes]
@@ -12277,7 +12278,7 @@ else
lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2
lt_status=$lt_dlunknown
cat > conftest.$ac_ext <<_LT_EOF
-#line 12280 "configure"
+#line 12281 "configure"
#include "confdefs.h"
#if HAVE_DLFCN_H
@@ -12383,7 +12384,7 @@ else
lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2
lt_status=$lt_dlunknown
cat > conftest.$ac_ext <<_LT_EOF
-#line 12386 "configure"
+#line 12387 "configure"
#include "confdefs.h"
#if HAVE_DLFCN_H
@@ -13438,30 +13439,40 @@ fi
if test x"yes" != x"no"; then
- sim_hw_p=yes
+ enable_sim_hardware=yes
else
- sim_hw_p=no
+ enable_sim_hardware=no
fi
+
if test ""; then
hardware=""
else
hardware="cfi core pal glue"
fi
hardware="$hardware mn103cpu mn103int mn103tim mn103ser mn103iop"
+
sim_hw_cflags="-DWITH_HW=1"
sim_hw="$hardware"
sim_hw_objs="\$(SIM_COMMON_HW_OBJS) `echo $sim_hw | sed -e 's/\([^ ][^ ]*\)/dv-\1.o/g'`"
+
# Check whether --enable-sim-hardware was given.
if test "${enable_sim_hardware+set}" = set; then :
enableval=$enable_sim_hardware;
-case "${enableval}" in
- yes) sim_hw_p=yes;;
- no) sim_hw_p=no;;
+fi
+
+case ${enable_sim_hardware} in
+ yes) sim_hw_p=yes;;
+ no) sim_hw_p=no;;
,*) sim_hw_p=yes; hardware="${hardware} `echo ${enableval} | sed -e 's/,/ /'`";;
*,) sim_hw_p=yes; hardware="`echo ${enableval} | sed -e 's/,/ /'` ${hardware}";;
- *) sim_hw_p=yes; hardware="`echo ${enableval} | sed -e 's/,/ /'`"'';;
+ *) sim_hw_p=yes; hardware="`echo ${enableval} | sed -e 's/,/ /'`"'';;
esac
+
if test "$sim_hw_p" != yes; then
+ if test "yes" = "always"; then
+ as_fn_error "Sorry, but this simulator requires that hardware support
+be enabled. Please configure without --disable-hw-support." "$LINENO" 5
+ fi
sim_hw_objs=
sim_hw_cflags="-DWITH_HW=0"
sim_hw=
@@ -13489,28 +13500,11 @@ _ACEOF
;;
esac
-fi
-if test x"$silent" != x"yes" && test "$sim_hw_p" = "yes"; then
- echo "Setting hardware to $sim_hw_cflags, $sim_hw, $sim_hw_objs"
-fi
-else
-
-if test "$sim_hw_p" != yes; then
- if test "yes" = "always"; then
- as_fn_error "Sorry, but this simulator requires that hardware support
-be enabled. Please configure without --disable-hw-support." "$LINENO" 5
+ if test x"$silent" != x"yes"; then
+ echo "Setting hardware to $sim_hw_cflags, $sim_hw, $sim_hw_objs"
fi
- sim_hw_objs=
- sim_hw_cflags="-DWITH_HW=0"
- sim_hw=
-fi
-if test x"$silent" != x"yes"; then
- echo "Setting hardware to $sim_hw_cflags, $sim_hw, $sim_hw_objs"
-fi
-fi
-
-case " $hardware " in
- *" cfi "*) { $as_echo "$as_me:${as_lineno-$LINENO}: checking for log2 in -lm" >&5
+ case " $hardware " in
+ *" cfi "*) { $as_echo "$as_me:${as_lineno-$LINENO}: checking for log2 in -lm" >&5
$as_echo_n "checking for log2 in -lm... " >&6; }
if test "${ac_cv_lib_m_log2+set}" = set; then :
$as_echo_n "(cached) " >&6
@@ -13555,7 +13549,8 @@ _ACEOF
fi
;;
-esac
+ esac
+fi
for ac_func in time chmod utime fork execve execv chown
@@ -13588,30 +13583,40 @@ done
if test x"always" != x"no"; then
- sim_hw_p=yes
+ enable_sim_hardware=yes
else
- sim_hw_p=no
+ enable_sim_hardware=no
fi
+
if test """"; then
hardware=""""
else
hardware="cfi core pal glue"
fi
hardware="$hardware """
+
sim_hw_cflags="-DWITH_HW=1"
sim_hw="$hardware"
sim_hw_objs="\$(SIM_COMMON_HW_OBJS) `echo $sim_hw | sed -e 's/\([^ ][^ ]*\)/dv-\1.o/g'`"
+
# Check whether --enable-sim-hardware was given.
if test "${enable_sim_hardware+set}" = set; then :
enableval=$enable_sim_hardware;
-case "${enableval}" in
- yes) sim_hw_p=yes;;
- no) sim_hw_p=no;;
+fi
+
+case ${enable_sim_hardware} in
+ yes) sim_hw_p=yes;;
+ no) sim_hw_p=no;;
,*) sim_hw_p=yes; hardware="${hardware} `echo ${enableval} | sed -e 's/,/ /'`";;
*,) sim_hw_p=yes; hardware="`echo ${enableval} | sed -e 's/,/ /'` ${hardware}";;
- *) sim_hw_p=yes; hardware="`echo ${enableval} | sed -e 's/,/ /'`"'';;
+ *) sim_hw_p=yes; hardware="`echo ${enableval} | sed -e 's/,/ /'`"'';;
esac
+
if test "$sim_hw_p" != yes; then
+ if test "always" = "always"; then
+ as_fn_error "Sorry, but this simulator requires that hardware support
+be enabled. Please configure without --disable-hw-support." "$LINENO" 5
+ fi
sim_hw_objs=
sim_hw_cflags="-DWITH_HW=0"
sim_hw=
@@ -13639,28 +13644,11 @@ _ACEOF
;;
esac
-fi
-if test x"$silent" != x"yes" && test "$sim_hw_p" = "yes"; then
- echo "Setting hardware to $sim_hw_cflags, $sim_hw, $sim_hw_objs"
-fi
-else
-
-if test "$sim_hw_p" != yes; then
- if test "always" = "always"; then
- as_fn_error "Sorry, but this simulator requires that hardware support
-be enabled. Please configure without --disable-hw-support." "$LINENO" 5
+ if test x"$silent" != x"yes"; then
+ echo "Setting hardware to $sim_hw_cflags, $sim_hw, $sim_hw_objs"
fi
- sim_hw_objs=
- sim_hw_cflags="-DWITH_HW=0"
- sim_hw=
-fi
-if test x"$silent" != x"yes"; then
- echo "Setting hardware to $sim_hw_cflags, $sim_hw, $sim_hw_objs"
-fi
-fi
-
-case " $hardware " in
- *" cfi "*) { $as_echo "$as_me:${as_lineno-$LINENO}: checking for log2 in -lm" >&5
+ case " $hardware " in
+ *" cfi "*) { $as_echo "$as_me:${as_lineno-$LINENO}: checking for log2 in -lm" >&5
$as_echo_n "checking for log2 in -lm... " >&6; }
if test "${ac_cv_lib_m_log2+set}" = set; then :
$as_echo_n "(cached) " >&6
@@ -13705,7 +13693,8 @@ _ACEOF
fi
;;
-esac
+ esac
+fi
if test -z "$SIM_DV_SOCKSER_O"; then
diff --git a/sim/sh64/ChangeLog b/sim/sh64/ChangeLog
index 0ba5b2d..7006db4 100644
--- a/sim/sh64/ChangeLog
+++ b/sim/sh64/ChangeLog
@@ -1,3 +1,7 @@
+2013-03-26 Mike Frysinger <vapier@gentoo.org>
+
+ * configure: Regenerate.
+
2013-03-23 Joel Sherrill <joel.sherrill@oarcorp.com>
* configure.ac: Fail if dv-sockser.o not available.
diff --git a/sim/sh64/configure b/sim/sh64/configure
index 2577ba5..0d9caec 100755
--- a/sim/sh64/configure
+++ b/sim/sh64/configure
@@ -1419,7 +1419,8 @@ Optional Features:
--enable-sim-environment=environment Specify mixed, user, virtual or operating environment.
--enable-sim-inline=inlines Specify which functions should be inlined.
--enable-cgen-maint=DIR build cgen generated files
- --enable-sim-hardware=LIST Specify the hardware to be included in the build.
+ --enable-sim-hardware=LIST
+ Specify the hardware to be included in the build.
Optional Packages:
--with-PACKAGE[=ARG] use PACKAGE [ARG=yes]
@@ -12276,7 +12277,7 @@ else
lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2
lt_status=$lt_dlunknown
cat > conftest.$ac_ext <<_LT_EOF
-#line 12279 "configure"
+#line 12280 "configure"
#include "confdefs.h"
#if HAVE_DLFCN_H
@@ -12382,7 +12383,7 @@ else
lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2
lt_status=$lt_dlunknown
cat > conftest.$ac_ext <<_LT_EOF
-#line 12385 "configure"
+#line 12386 "configure"
#include "confdefs.h"
#if HAVE_DLFCN_H
@@ -13339,30 +13340,40 @@ fi
if test x"always" != x"no"; then
- sim_hw_p=yes
+ enable_sim_hardware=yes
else
- sim_hw_p=no
+ enable_sim_hardware=no
fi
+
if test """"; then
hardware=""""
else
hardware="cfi core pal glue"
fi
hardware="$hardware """
+
sim_hw_cflags="-DWITH_HW=1"
sim_hw="$hardware"
sim_hw_objs="\$(SIM_COMMON_HW_OBJS) `echo $sim_hw | sed -e 's/\([^ ][^ ]*\)/dv-\1.o/g'`"
+
# Check whether --enable-sim-hardware was given.
if test "${enable_sim_hardware+set}" = set; then :
enableval=$enable_sim_hardware;
-case "${enableval}" in
- yes) sim_hw_p=yes;;
- no) sim_hw_p=no;;
+fi
+
+case ${enable_sim_hardware} in
+ yes) sim_hw_p=yes;;
+ no) sim_hw_p=no;;
,*) sim_hw_p=yes; hardware="${hardware} `echo ${enableval} | sed -e 's/,/ /'`";;
*,) sim_hw_p=yes; hardware="`echo ${enableval} | sed -e 's/,/ /'` ${hardware}";;
- *) sim_hw_p=yes; hardware="`echo ${enableval} | sed -e 's/,/ /'`"'';;
+ *) sim_hw_p=yes; hardware="`echo ${enableval} | sed -e 's/,/ /'`"'';;
esac
+
if test "$sim_hw_p" != yes; then
+ if test "always" = "always"; then
+ as_fn_error "Sorry, but this simulator requires that hardware support
+be enabled. Please configure without --disable-hw-support." "$LINENO" 5
+ fi
sim_hw_objs=
sim_hw_cflags="-DWITH_HW=0"
sim_hw=
@@ -13390,28 +13401,11 @@ _ACEOF
;;
esac
-fi
-if test x"$silent" != x"yes" && test "$sim_hw_p" = "yes"; then
- echo "Setting hardware to $sim_hw_cflags, $sim_hw, $sim_hw_objs"
-fi
-else
-
-if test "$sim_hw_p" != yes; then
- if test "always" = "always"; then
- as_fn_error "Sorry, but this simulator requires that hardware support
-be enabled. Please configure without --disable-hw-support." "$LINENO" 5
+ if test x"$silent" != x"yes"; then
+ echo "Setting hardware to $sim_hw_cflags, $sim_hw, $sim_hw_objs"
fi
- sim_hw_objs=
- sim_hw_cflags="-DWITH_HW=0"
- sim_hw=
-fi
-if test x"$silent" != x"yes"; then
- echo "Setting hardware to $sim_hw_cflags, $sim_hw, $sim_hw_objs"
-fi
-fi
-
-case " $hardware " in
- *" cfi "*) { $as_echo "$as_me:${as_lineno-$LINENO}: checking for log2 in -lm" >&5
+ case " $hardware " in
+ *" cfi "*) { $as_echo "$as_me:${as_lineno-$LINENO}: checking for log2 in -lm" >&5
$as_echo_n "checking for log2 in -lm... " >&6; }
if test "${ac_cv_lib_m_log2+set}" = set; then :
$as_echo_n "(cached) " >&6
@@ -13456,7 +13450,8 @@ _ACEOF
fi
;;
-esac
+ esac
+fi
if test -z "$SIM_DV_SOCKSER_O"; then
generated by cgit v1.1 at 2024-11-22 14:54:05 +0000