aboutsummaryrefslogtreecommitdiff
diff options
context:
space:
mode:
-rw-r--r--ChangeLog5
-rw-r--r--MAINTAINERS4
-rw-r--r--libdecnumber/ChangeLog315
-rw-r--r--libdecnumber/Makefile.in186
-rw-r--r--libdecnumber/aclocal.m415
-rw-r--r--libdecnumber/bid/bid-dpd.h43
-rw-r--r--libdecnumber/bid/bid2dpd_dpd2bid.c428
-rw-r--r--libdecnumber/bid/bid2dpd_dpd2bid.h10407
-rw-r--r--libdecnumber/bid/decimal128.c148
-rw-r--r--libdecnumber/bid/decimal128.h1
-rw-r--r--libdecnumber/bid/decimal128Local.h1
-rw-r--r--libdecnumber/bid/decimal128Symbols.h1
-rw-r--r--libdecnumber/bid/decimal32.c148
-rw-r--r--libdecnumber/bid/decimal32.h1
-rw-r--r--libdecnumber/bid/decimal32Symbols.h1
-rw-r--r--libdecnumber/bid/decimal64.c148
-rw-r--r--libdecnumber/bid/decimal64.h1
-rw-r--r--libdecnumber/bid/decimal64Symbols.h1
-rw-r--r--libdecnumber/bid/host-ieee128.c48
-rw-r--r--libdecnumber/bid/host-ieee32.c57
-rw-r--r--libdecnumber/bid/host-ieee64.c57
-rw-r--r--libdecnumber/config.in80
-rwxr-xr-xlibdecnumber/configure9329
-rw-r--r--libdecnumber/configure.ac125
-rw-r--r--libdecnumber/decBasic.c3769
-rw-r--r--libdecnumber/decCommon.c1771
-rw-r--r--libdecnumber/decContext.c432
-rw-r--r--libdecnumber/decContext.h258
-rw-r--r--libdecnumber/decContextSymbols.h22
-rw-r--r--libdecnumber/decDPD.h1214
-rw-r--r--libdecnumber/decDouble.c154
-rw-r--r--libdecnumber/decDouble.h164
-rw-r--r--libdecnumber/decDoubleSymbols.h84
-rw-r--r--libdecnumber/decExcept.c59
-rw-r--r--libdecnumber/decExcept.h39
-rw-r--r--libdecnumber/decLibrary.c76
-rw-r--r--libdecnumber/decNumber.c8122
-rw-r--r--libdecnumber/decNumber.h200
-rw-r--r--libdecnumber/decNumberLocal.h665
-rw-r--r--libdecnumber/decNumberSymbols.h69
-rw-r--r--libdecnumber/decPacked.c235
-rw-r--r--libdecnumber/decPacked.h70
-rw-r--r--libdecnumber/decPackedSymbols.h9
-rw-r--r--libdecnumber/decQuad.c146
-rw-r--r--libdecnumber/decQuad.h186
-rw-r--r--libdecnumber/decQuadSymbols.h82
-rw-r--r--libdecnumber/decRound.c102
-rw-r--r--libdecnumber/decRound.h37
-rw-r--r--libdecnumber/decSingle.c85
-rw-r--r--libdecnumber/decSingle.h101
-rw-r--r--libdecnumber/decSingleSymbols.h24
-rw-r--r--libdecnumber/dpd/decimal128.c570
-rw-r--r--libdecnumber/dpd/decimal128.h101
-rw-r--r--libdecnumber/dpd/decimal128Local.h47
-rw-r--r--libdecnumber/dpd/decimal128Symbols.h16
-rw-r--r--libdecnumber/dpd/decimal32.c495
-rw-r--r--libdecnumber/dpd/decimal32.h99
-rw-r--r--libdecnumber/dpd/decimal32Symbols.h16
-rw-r--r--libdecnumber/dpd/decimal64.c856
-rw-r--r--libdecnumber/dpd/decimal64.h101
-rw-r--r--libdecnumber/dpd/decimal64Symbols.h16
-rw-r--r--src-release2
62 files changed, 42043 insertions, 1 deletions
diff --git a/ChangeLog b/ChangeLog
index a3d1048..a9100dc 100644
--- a/ChangeLog
+++ b/ChangeLog
@@ -1,3 +1,8 @@
+2007-10-11 Daniel Jacobowitz <dan@codesourcery.com>
+
+ * src-release (GDB_SUPPORT_DIRS): Add libdecnumber.
+ * libdecnumber: New directory, imported from GCC.
+
2007-10-08 Mike Frysinger <vapier@gentoo.org>
* configure.ac (CFLAGS_FOR_BUILD, CXXFLAGS_FOR_BUILD,
diff --git a/MAINTAINERS b/MAINTAINERS
index 6c5f732..57ad6f0 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -57,6 +57,10 @@ intl/; config.rhost; libiberty/; libiberty's part of include/
merge. Otherwise, changes are automatically merged, usually
within a day.
+libdecnumber/
+ See libiberty. The master copy of this directory is in the GCC
+ repository.
+
ltconfig; ltmain.sh; ltcf-*.sh
libtool: http://www.gnu.org/software/libtool/
Changes need to be done in tandem with the official LIBTOOL
diff --git a/libdecnumber/ChangeLog b/libdecnumber/ChangeLog
new file mode 100644
index 0000000..38b4253
--- /dev/null
+++ b/libdecnumber/ChangeLog
@@ -0,0 +1,315 @@
+2007-09-10 Janis Johnson <janis187@us.ibm.com>
+ Ben Elliston <bje@au.ibm.com>
+
+ * Makefile.in (libdecnumber_a_OBJS): Remove decUtility.o
+ (dependencies): Add Symbols headers.
+ * decContext.c: Upgrade to decNumber 3.53.
+ * decContext.h: Ditto.
+ * decDPD.h: Ditto.
+ * decNumber.c: Ditto.
+ * decNumber.h: Ditto.
+ * decNumberLocal.h: Ditto.
+ * decBasic.c: New file from decNumber 3.53.
+ * decCommon.c: Ditto.
+ * decDouble.c: Ditto.
+ * decDouble.h: Ditto.
+ * decQuad.c: Ditto.
+ * decQuad.h: Ditto.
+ * decSingle.c: Ditto.
+ * decSingle.h: Ditto.
+ * decPacked.c: Ditto.
+ * decPacked.h: Ditto.
+ * dpd/decimal128.c: Upgrade to decNumber 3.53.
+ * dpd/decimal128.h: Ditto.
+ * dpd/decimal32.c: Ditto.
+ * dpd/decimal32.h: Ditto.
+ * dpd/decimal64.c: Ditto.
+ * dpd/decimal64.h: Ditto.
+ * decLibrary.c (__dec_byte_swap): Remove.
+ * decContextSymbols.h: New file.
+ * decDoubleSymbols.h: New file.
+ * decNumberSymbols.h: New file.
+ * decPackedSymbols.h: New file.
+ * decQuadSymbols.h: New file.
+ * decSingleSymbols.h: New file.
+ * decUtility.c: Delete file.
+ * decUtility.h: Delete file.
+ * bid/decimal128Symbols.h: New file.
+ * bid/decimal128Local.h: New file.
+ * bid/decimal32Symbols.h: New file.
+ * bid/decimal64Symbols.h: New file.
+ * bid/host-ieee128.c (__swap128): Remove.
+ (__host_to_ieee_128, __ieee_to_host_128): Don't handle endianness.
+ * bid/host-ieee32.c (__dec_type_swap): Remove.
+ (__host_to_ieee_32, __ieee_to_host_32): Don't handle endianness.
+ * bid/host-ieee64.c (__swap64): Remove.
+ (__host_to_ieee_64, __ieee_to_host_64): Don't handle endianness.
+ * dpd/decimal32Symbols.h: New file.
+ * dpd/decimal64Symbols.h: New file.
+ * dpd/decimal128Symbols.h: New file.
+ * dpd/decimal128Local.h: New file.
+
+2007-06-18 Martin Michlmayr <tbm@cyrius.com>
+ H.J. Lu <hongjiu.lu@intel.com>
+
+ * configure.ac: Add AC_CANONICAL_TARGET.
+ * configure: Regenerated.
+
+2007-04-16 H.J. Lu <hongjiu.lu@intel.com>
+
+ * Makefile.in (aclocal.m4): Depend on stdint.m4 instead of
+ acx.m4.
+
+ * aclocal.m4: Regenerated by aclocal 1.9.6.
+
+2007-04-11 Kai Tietz <kai.tietz@onevision.com>
+
+ * configure: Regenerate.
+
+2007-03-23 Michael Meissner <michael.meissner@amd.com>
+ H.J. Lu <hongjiu.lu@intel.com>
+ Marius Cornea <marius.cornea@intel.com>
+
+ * Makefile.in (enable_decimal_float): New.
+ (libdecnumber_a_OBJS): Add bid2dpd_dpd2bid.o, host-ieee32.o,
+ host-ieee64.o and host-ieee128.o for BID.
+ (libdecnumber_a_SOURCES): Support DPD and BID.
+ (decimal32.o): Support dependency for both DPD and BID.
+ (decimal64.o): Likewise.
+ (decimal128.o): Likewise.
+ (bid2dpd_dpd2bid.o): New target.
+ (host-ieee32.o): Likewise.
+ (host-ieee64.o): Likewise.
+ (host-ieee128.o): Likewise.
+
+ * bid/bid-dpd.h: New file.
+ * bid/decimal128.c: Likewise.
+ * bid/decimal128.h: Likewise.
+ * bid/decimal32.c: Likewise.
+ * bid/decimal32.h: Likewise.
+ * bid/decimal64.c: Likewise.
+ * bid/decimal64.h: Likewise.
+ * bid/host-ieee128.c: Likewise.
+ * bid/host-ieee32.c: Likewise.
+ * bid/host-ieee64.c: Likewise.
+ * bid/bid2dpd_dpd2bid.c: Likewise.
+ * bid/bid2dpd_dpd2bid.h: Likewise.
+
+ * decimal128.c: Moved to ...
+ * dpd/decimal128.c: This.
+ * decimal128.h: Moved to ...
+ * dpd/decimal128.h: This.
+ * decimal32.c: Moved to ...
+ * dpd/decimal32.c: This.
+ * decimal32.h: Moved to ...
+ * dpd/decimal32.h: This.
+ * decimal64.c: Moved to ...
+ * dpd/decimal64.c: This.
+ * decimal64.h: Moved to ...
+ * dpd/decimal64.h: This.
+
+ * configure.ac: Support * --enable-decimal-float={no,yes,bid,dpd}.
+ Add AC_C_BIGENDIAN. Substitute enable_decimal_float.
+ * config.in: Add decimal support variables.
+ * configure: Regenerate.
+
+ PR other/30530
+ * decimal128.h (decimal128ClearSign): New.
+ (decimal128FlipSign): Likewise.
+
+ * decimal32.h: (decimal32ClearSign): New.
+ (decimal32FlipSign): Likewise.
+
+ * decimal64.h (decimal64ClearSign): New.
+ (decimal64FlipSign): Likewise.
+
+2007-03-08 Ben Elliston <bje@au.ibm.com>
+
+ * decContext.c, decContext.h, decDPD.h, decimal128.c,
+ decimal128.h, decimal32.c, decimal32.h, decimal64.c, decimal64.h,
+ decLibrary.c, decNumber.c, decNumber.h, decNumberLocal.h,
+ decRound.c, decRound.h, decUtility.c, decUtility.h: Add
+ libgcc-style license exception clause.
+
+2007-03-01 Brooks Moses <brooks.moses@codesourcery.com>
+
+ * Makefile.in: Add dummy install-pdf target.
+
+2007-01-29 Janis Johnson <janis187@us.ibm.com>
+
+ * decExcept.c: New.
+ * decExcept.h: New.
+
+2006-11-29 Janis Johnson <janis187@us.ibm.com>
+
+ * decRound.c: Move declarations to new file, update comments.
+ * decRound.h: New file.
+
+2006-11-21 Janis Johnson <janis187@us.ibm.com>
+
+ * decLibrary.c (__dec_type_swap): Add prototype.
+ (__dfp_enable_traps, dfp_raise): Delete.
+
+ * Makefile.in: Don't include decRound in library used by compiler.
+
+2006-10-10 Brooks Moses <bmoses@stanford.edu>
+ * Makefile.in: Added empty "pdf" target.
+
+2006-09-15 Kaveh R. Ghazi <ghazi@caip.rutgers.edu>
+
+ * decNumber.c (decNumberPower): Constify.
+ * decNumber.h (decNumberPower): Likewise.
+
+2006-09-07 Kaveh R. Ghazi <ghazi@caip.rutgers.edu>
+
+ * configure.ac (ACX_PROG_CC_WARNING_OPTS): Add -Wcast-qual.
+ * configure, config.in: Regenerate.
+
+ * decContext.c (decContextStatusToString): Constify.
+ * decContext.h (decContextStatusToString): Likewise.
+ * decNumber.c (decNumberToString, decNumberToEngString,
+ decNumberAbs, decNumberAdd, decNumberCompare, decNumberDivide,
+ decNumberDivideInteger, decNumberMax, decNumberMin,
+ decNumberMinus, decNumberPlus, decNumberMultiply,
+ decNumberNormalize, decNumberQuantize, decNumberRescale,
+ decNumberRemainder, decNumberRemainderNear,
+ decNumberSameQuantum, decNumberSquareRoot, decNumberSubtract,
+ decNumberToIntegralValue, decNumberCopy, decToString, decAddOp,
+ decDivideOp, decMultiplyOp, decQuantizeOp, decCompareOp,
+ decCompare, decUnitCompare, decUnitAddSub, decRoundOperand,
+ decCopyFit, decSetCoeff, decGetInt, decNaNs, decGetDigits,
+ decNumberShow, decDumpAr, decCheckOperands, decCheckNumber):
+ Likewise.
+ * decNumber.h (decNumberToString, decNumberToEngString,
+ decNumberAbs, decNumberAdd, decNumberCompare, decNumberDivide,
+ decNumberDivideInteger, decNumberMax, decNumberMin,
+ decNumberMinus, decNumberMultiply, decNumberNormalize,
+ decNumberPlus, decNumberQuantize, decNumberRemainder,
+ decNumberRemainderNear, decNumberRescale,
+ decNumberSameQuantum, decNumberSquareRoot, decNumberSubtract,
+ decNumberToIntegralValue, decNumberCopy): Likewise.
+ * decUtility.c (decDensePackCoeff, decDenseUnpackCoeff):
+ Likewise.
+ * decUtility.h (decDensePackCoeff, decDenseUnpackCoeff):
+ Likewise.
+ * decimal128.c (decimal128FromNumber, decimal128ToNumber,
+ decimal128ToString, decimal128ToEngString, decimal128Show):
+ Likewise.
+ * decimal128.h (decimal128ToString, decimal128ToEngString,
+ decimal128FromNumber, decimal128ToNumber): Likewise.
+ * decimal32.c (decimal32FromNumber, decimal32ToNumber,
+ decimal32ToString, decimal32ToEngString, decimal32Show):
+ Likewise.
+ * decimal32.h (decimal32ToString, decimal32ToEngString,
+ decimal32FromNumber, decimal32ToNumber): Likewise.
+ * decimal64.c (decimal64FromNumber, decimal64ToNumber,
+ decimal64ToString, decimal64ToEngString, decimal64Show):
+ Likewise.
+ * decimal64.h (decimal64ToString, decimal64ToEngString,
+ decimal64FromNumber, decimal64ToNumber): Likewise.
+
+2006-08-21 Kaveh R. Ghazi <ghazi@caip.rutgers.edu>
+
+ * decContext.c (decContextSetStatusFromString): Constify.
+ * decContext.h (decContextSetStatusFromString): Likewise.
+ * decNumber.c (decNumberFromString): Likewise.
+ * decNumber.h (decNumberFromString): Likewise.
+ * decimal128.c (decimal128FromString): Likewise.
+ * decimal128.h (decimal128FromString): Likewise.
+ * decimal32.c (decimal32FromString): Likewise.
+ * decimal32.h (decimal32FromString): Likewise.
+ * decimal64.c (decimal64FromString): Likewise.
+ * decimal64.h (decimal64FromString): Likewise.
+
+2006-07-25 Paolo Bonzini <bonzini@gnu.org>
+
+ PR build/26188
+ * configure: Regenerate.
+
+2006-06-23 Ben Elliston <bje@au.ibm.com>
+
+ * decNumber.h (decNumberNegate): Remove.
+
+2006-05-23 Carlos O'Donell <carlos@codesourcery.com>
+
+ * Makefile.in: Add install-html target. Add install-html to .PHONY
+
+2006-02-06 Ben Elliston <bje@au.ibm.com>
+
+ * decLibrary.c (__dec_byte_swap): Use uint32_t for argument and
+ return types.
+
+2006-01-03 Roger Sayle <roger@eyesopen.com>
+ Kaveh R. Ghazi <ghazi@caip.rutgers.edu>
+
+ * decNumber.c (__NO_STRING_INLINES): Define to prevent glibc macro
+ definition of strcpy from generating compilation warnings.
+
+2006-01-02 Paolo Bonzini <bonzini@gnu.org>
+
+ PR target/25259
+ * configure.ac: Use GCC_HEADER_STDINT.
+ * decContext.h: Include gstdint.h.
+ * aclocal.m4: Regenerate.
+ * configure: Regenerate.
+
+2005-12-20 Roger Sayle <roger@eyesopen.com>
+
+ * decNumber.c (decStrEq): Cast string contents to unsigned char
+ instead of int before calling tolower.
+
+2005-12-20 Roger Sayle <roger@eyesopen.com>
+
+ * decNumber.c (decStrEq): Cast operands to int before calling
+ tolower to avoid compilation warnings on Tru64.
+
+2005-12-05 Ben Elliston <bje@au.ibm.com>
+
+ * Makefile.in (clean): Remove stray reference to libcpp.a.
+
+ * decimal128.h, decContext.c, decRound.c, decimal32.c,
+ decNumber.c, decContext.h, decimal64.c, decimal32.h, decNumber.h,
+ decimal64.h, decUtility.c, decLibrary.c, configure.ac,
+ decNumberLocal.h, decUtility.h, decDPD.h, decimal128.c: Update FSF
+ office address.
+
+2005-12-01 Ben Elliston <bje@au.ibm.com>
+
+ * Makefile.in (libdecnumber_a_SOURCES): Drop decLibrary.c.
+ * decUtility.c (__dec_byte_swap): Move from here ..
+ * decLibrary.c: .. to here.
+
+2005-11-23 Gerald Pfeifer <gerald@pfeifer.com>
+
+ * decContext.h: Properly guard inclusion of stdint.h
+ * decContext.c: Include config.h
+ * decLibrary.c: Ditto.
+ * decNumber.c: Ditto.
+ * decRound.c: Ditto.
+ * decUtility.c: Ditto.
+ * decimal32.c: Ditto.
+ * decimal64.c: Ditto.
+ * decimal128.c: Ditto.
+
+2005-11-29 Ben Elliston <bje@au.ibm.com>
+
+ * decUtility.c: Remove redundant #includes.
+ * decUtility.h (__dec_byte_swap): Remove prototype.
+
+2005-11-29 Ben Elliston <bje@au.ibm.com>
+
+ * configure.ac: New file.
+ * aclocal.m4: Likewise.
+ * Makefile.in: Likewise.
+ * configure: Generate.
+ * config.in: Likewise.
+
+2005-11-29 Ben Elliston <bje@au.ibm.com>
+
+ * decimal32.h, decimal64.h, decimal128.h: New.
+ * decimal32.c, decimal64.c, decimal128.c: Likewise.
+ * decContext.c, decContext.h: Likewise.
+ * decUtility.c, decUtility.h: Likewise.
+ * decNumber.c, decNumber.h, decNumberLocal.h: Likewise.
+ * decDPD.h: Likewise.
+ * decLibrary.c, decRound.c: Likewise.
diff --git a/libdecnumber/Makefile.in b/libdecnumber/Makefile.in
new file mode 100644
index 0000000..98ae9ea
--- /dev/null
+++ b/libdecnumber/Makefile.in
@@ -0,0 +1,186 @@
+# @configure_input@
+# Makefile for libdecnumber. Run 'configure' to generate Makefile from Makefile.in
+
+# Copyright (C) 2005, 2007 Free Software Foundation, Inc.
+
+#This file is part of GCC.
+
+#GCC is free software; you can redistribute it and/or modify
+#it under the terms of the GNU General Public License as published by
+#the Free Software Foundation; either version 2, or (at your option)
+#any later version.
+
+#GCC is distributed in the hope that it will be useful,
+#but WITHOUT ANY WARRANTY; without even the implied warranty of
+#MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+#GNU General Public License for more details.
+
+#You should have received a copy of the GNU General Public License
+#along with GCC; see the file COPYING. If not, write to
+#the Free Software Foundation, 51 Franklin Street, Fifth Floor,
+#Boston MA 02110-1301, USA.
+
+@SET_MAKE@
+
+srcdir = @srcdir@
+top_builddir = .
+VPATH = @srcdir@
+INSTALL = @INSTALL@
+AR = ar
+ARFLAGS = cru
+ACLOCAL = @ACLOCAL@
+AUTOCONF = @AUTOCONF@
+AUTOHEADER = @AUTOHEADER@
+CC = @CC@
+CFLAGS = @CFLAGS@
+WARN_CFLAGS = @WARN_CFLAGS@ @WARN_PEDANTIC@ @WERROR@
+CPP = @CPP@
+CPPFLAGS = @CPPFLAGS@
+INSTALL_DATA = @INSTALL_DATA@
+INSTALL_PROGRAM = @INSTALL_PROGRAM@
+LDFLAGS = @LDFLAGS@
+LIBICONV = @LIBICONV@
+PACKAGE = @PACKAGE@
+RANLIB = @RANLIB@
+SHELL = @SHELL@
+
+datadir = @datadir@
+exec_prefix = @prefix@
+libdir = @libdir@
+localedir = $(datadir)/locale
+prefix = @prefix@
+
+enable_decimal_float= @enable_decimal_float@
+
+INCLUDES = -I$(srcdir) -I.
+
+ALL_CFLAGS = $(CFLAGS) $(WARN_CFLAGS) $(INCLUDES) $(CPPFLAGS)
+
+libdecnumber_a_OBJS = decNumber.o decContext.o \
+ decimal32.o decimal64.o decimal128.o
+
+ifeq ($(enable_decimal_float),bid)
+libdecnumber_a_OBJS+=bid2dpd_dpd2bid.o host-ieee32.o host-ieee64.o \
+ host-ieee128.o
+endif
+
+libdecnumber_a_SOURCES = decContext.c decContext.h decDPD.h \
+ decNumber.c decNumber.h decNumberLocal.h \
+ dpd/decimal128.c dpd/decimal128.h \
+ dpd/decimal32.c dpd/decimal32.h \
+ dpd/decimal64.c dpd/decimal64.h \
+ bid/decimal128.c bid/decimal128.h \
+ bid/decimal32.c bid/decimal32.h \
+ bid/decimal64.c bid/decimal64.h
+
+all: libdecnumber.a
+
+.SUFFIXES:
+.SUFFIXES: .c .o .obj
+
+libdecnumber.a: $(libdecnumber_a_OBJS)
+ -rm -f $@
+ $(AR) $(ARFLAGS) $@ $(libdecnumber_a_OBJS)
+ $(RANLIB) $@
+
+# Rules to rebuild the configuration
+
+Makefile: $(srcdir)/Makefile.in config.status
+ $(SHELL) ./config.status Makefile
+
+config.status: $(srcdir)/configure
+ $(SHELL) ./config.status --recheck
+
+$(srcdir)/configure: @MAINT@ $(srcdir)/aclocal.m4
+ cd $(srcdir) && $(AUTOCONF)
+
+$(srcdir)/aclocal.m4: @MAINT@ $(srcdir)/../config/stdint.m4 \
+ $(srcdir)/../config/warnings.m4 \
+ $(srcdir)/configure.ac
+ cd $(srcdir) && $(ACLOCAL) -I ../config
+
+config.h: stamp-h1
+ test -f config.h || (rm -f stamp-h1 && $(MAKE) stamp-h1)
+
+stamp-h1: $(srcdir)/config.in config.status
+ -rm -f stamp-h1
+ $(SHELL) ./config.status config.h
+
+$(srcdir)/config.in: @MAINT@ $(srcdir)/configure
+ cd $(srcdir) && $(AUTOHEADER)
+ -rm -f stamp-h1
+
+# Dependencies.
+
+decContext.o: decContext.c decContext.h decNumberLocal.h \
+ decContextSymbols.h
+decNumber.o: decNumber.c decNumber.h decContext.h decNumberLocal.h \
+ decNumberSymbols.h
+decimal32.o: $(enable_decimal_float)/decimal32.c \
+ $(enable_decimal_float)/decimal32.h \
+ $(enable_decimal_float)/decimal32Symbols.h \
+ decNumber.h decContext.h decNumberLocal.h
+ $(COMPILE) $<
+decimal64.o: $(enable_decimal_float)/decimal64.c \
+ $(enable_decimal_float)/decimal64.h \
+ $(enable_decimal_float)/decimal64Symbols.h \
+ decNumber.h decContext.h decNumberLocal.h
+ $(COMPILE) $<
+decimal128.o: $(enable_decimal_float)/decimal128.c \
+ $(enable_decimal_float)/decimal128.h \
+ $(enable_decimal_float)/decimal128Symbols.h\
+ $(enable_decimal_float)/decimal128Local.h\
+ decNumber.h decContext.h decNumberLocal.h
+ $(COMPILE) $<
+bid2dpd_dpd2bid.o : bid/bid2dpd_dpd2bid.c bid/bid2dpd_dpd2bid.h
+ $(COMPILE) $<
+host-ieee32.o : bid/host-ieee32.c bid/decimal32.h
+ $(COMPILE) $<
+host-ieee64.o : bid/host-ieee64.c bid/decimal64.h
+ $(COMPILE) $<
+host-ieee128.o : bid/host-ieee128.c bid/decimal128.h
+ $(COMPILE) $<
+# Other miscellaneous targets.
+
+mostlyclean:
+ -rm -f *.o
+
+clean: mostlyclean
+ -rm -rf makedepend$(EXEEXT) libdecnumber.a $(srcdir)/autom4te.cache
+
+distclean: clean
+ -rm -f config.h stamp-h1 config.status config.cache config.log \
+ configure.lineno configure.status.lineno Makefile localedir.h \
+ localedir.hs
+
+maintainer-clean: distclean
+ @echo "This command is intended for maintainers to use"
+ @echo "it deletes files that may require special tools to rebuild."
+ -rm -f $(srcdir)/configure $(srcdir)/aclocal.m4
+
+check:
+installcheck:
+dvi:
+pdf:
+html:
+info:
+install-info:
+install-pdf:
+install-man:
+install-html:
+install:
+
+.PHONY: installdirs install install-strip mostlyclean clean distclean \
+ maintainer-clean check installcheck dvi pdf html info install-info \
+ install-pdf install-man update-po install-html
+
+COMPILE = source='$<' object='$@' libtool=no $(CC) $(DEFS) $(INCLUDES) $(CPPFLAGS) $(ALL_CFLAGS) -c
+
+# Implicit rules
+
+.c.o:
+ $(COMPILE) $<
+
+# Tell versions [3.59,3.63) of GNU make to not export all variables.
+# Otherwise a system limit (for SysV at least) may be exceeded.
+.NOEXPORT:
diff --git a/libdecnumber/aclocal.m4 b/libdecnumber/aclocal.m4
new file mode 100644
index 0000000..f35b363
--- /dev/null
+++ b/libdecnumber/aclocal.m4
@@ -0,0 +1,15 @@
+# generated automatically by aclocal 1.9.6 -*- Autoconf -*-
+
+# Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004,
+# 2005 Free Software Foundation, Inc.
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
+# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
+# PARTICULAR PURPOSE.
+
+m4_include([../config/stdint.m4])
+m4_include([../config/warnings.m4])
diff --git a/libdecnumber/bid/bid-dpd.h b/libdecnumber/bid/bid-dpd.h
new file mode 100644
index 0000000..d8bf327
--- /dev/null
+++ b/libdecnumber/bid/bid-dpd.h
@@ -0,0 +1,43 @@
+/* Copyright (C) 2007
+ Free Software Foundation, Inc.
+
+This file is part of GCC.
+
+GCC is free software; you can redistribute it and/or modify it under
+the terms of the GNU General Public License as published by the Free
+Software Foundation; either version 2, or (at your option) any later
+version.
+
+GCC is distributed in the hope that it will be useful, but WITHOUT ANY
+WARRANTY; without even the implied warranty of MERCHANTABILITY or
+FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
+for more details.
+
+You should have received a copy of the GNU General Public License
+along with GCC; see the file COPYING. If not, write to the Free
+Software Foundation, 51 Franklin Street, Fifth Floor, Boston, MA
+02110-1301, USA. */
+
+/* As a special exception, if you link this library with other files,
+ some of which are compiled with GCC, to produce an executable,
+ this library does not by itself cause the resulting executable
+ to be covered by the GNU General Public License.
+ This exception does not however invalidate any other reasons why
+ the executable file might be covered by the GNU General Public License. */
+
+typedef unsigned int UINT32;
+typedef unsigned long long UINT64;
+typedef struct { UINT64 w[2]; } UINT128;
+
+#ifndef IN_LIBGCC2
+#define _Decimal32 UINT32
+#define _Decimal64 UINT64
+#define _Decimal128 UINT128
+#endif
+
+void _bid_to_dpd32 (_Decimal32 *, _Decimal32 *);
+void _dpd_to_bid32 (_Decimal32 *, _Decimal32 *);
+void _bid_to_dpd64 (_Decimal64 *, _Decimal64 *);
+void _dpd_to_bid64 (_Decimal64 *, _Decimal64 *);
+void _bid_to_dpd128 (_Decimal128 *, _Decimal128 *);
+void _dpd_to_bid128 (_Decimal128 *, _Decimal128 *);
diff --git a/libdecnumber/bid/bid2dpd_dpd2bid.c b/libdecnumber/bid/bid2dpd_dpd2bid.c
new file mode 100644
index 0000000..01e83bc
--- /dev/null
+++ b/libdecnumber/bid/bid2dpd_dpd2bid.c
@@ -0,0 +1,428 @@
+/* Copyright (C) 2007 Free Software Foundation, Inc.
+
+This file is part of GCC.
+
+GCC is free software; you can redistribute it and/or modify it under
+the terms of the GNU General Public License as published by the Free
+Software Foundation; either version 2, or (at your option) any later
+version.
+
+In addition to the permissions in the GNU General Public License, the
+Free Software Foundation gives you unlimited permission to link the
+compiled version of this file into combinations with other programs,
+and to distribute those combinations without any restriction coming
+from the use of this file. (The General Public License restrictions
+do apply in other respects; for example, they cover modification of
+the file, and distribution when not linked into a combine
+executable.)
+
+GCC is distributed in the hope that it will be useful, but WITHOUT ANY
+WARRANTY; without even the implied warranty of MERCHANTABILITY or
+FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
+for more details.
+
+You should have received a copy of the GNU General Public License
+along with GCC; see the file COPYING. If not, write to the Free
+Software Foundation, 51 Franklin Street, Fifth Floor, Boston, MA
+02110-1301, USA. */
+
+#undef IN_LIBGCC2
+#include "bid-dpd.h"
+
+/* get full 64x64bit product */
+#define __mul_64x64_to_128(P, CX, CY) \
+{ \
+ UINT64 CXH, CXL, CYH,CYL,PL,PH,PM,PM2; \
+ CXH = (CX) >> 32; \
+ CXL = (UINT32)(CX); \
+ CYH = (CY) >> 32; \
+ CYL = (UINT32)(CY); \
+ \
+ PM = CXH*CYL; \
+ PH = CXH*CYH; \
+ PL = CXL*CYL; \
+ PM2 = CXL*CYH; \
+ PH += (PM>>32); \
+ PM = (UINT64)((UINT32)PM)+PM2+(PL>>32); \
+ \
+ (P).w[1] = PH + (PM>>32); \
+ (P).w[0] = (PM<<32)+(UINT32)PL; \
+}
+
+/* add 64-bit value to 128-bit */
+#define __add_128_64(R128, A128, B64) \
+{ \
+ UINT64 R64H; \
+ R64H = (A128).w[1]; \
+ (R128).w[0] = (B64) + (A128).w[0]; \
+ if((R128).w[0] < (B64)) R64H ++; \
+ (R128).w[1] = R64H; \
+}
+
+/* add 128-bit value to 128-bit (assume no carry-out) */
+#define __add_128_128(R128, A128, B128) \
+{ \
+ UINT128 Q128; \
+ Q128.w[1] = (A128).w[1]+(B128).w[1]; \
+ Q128.w[0] = (B128).w[0] + (A128).w[0]; \
+ if(Q128.w[0] < (B128).w[0]) Q128.w[1] ++; \
+ (R128).w[1] = Q128.w[1]; \
+ (R128).w[0] = Q128.w[0]; \
+}
+
+#define __mul_128x128_high(Q, A, B) \
+{ \
+ UINT128 ALBL, ALBH, AHBL, AHBH, QM, QM2; \
+ \
+ __mul_64x64_to_128(ALBH, (A).w[0], (B).w[1]); \
+ __mul_64x64_to_128(AHBL, (B).w[0], (A).w[1]); \
+ __mul_64x64_to_128(ALBL, (A).w[0], (B).w[0]); \
+ __mul_64x64_to_128(AHBH, (A).w[1],(B).w[1]); \
+ \
+ __add_128_128(QM, ALBH, AHBL); \
+ __add_128_64(QM2, QM, ALBL.w[1]); \
+ __add_128_64((Q), AHBH, QM2.w[1]); \
+}
+
+#include "bid2dpd_dpd2bid.h"
+
+static const unsigned int dm103[] =
+ { 0, 1000, 2000, 3000, 4000, 5000, 6000, 7000, 8000, 9000, 10000, 11000 };
+
+void _bid_to_dpd32 (_Decimal32 *, _Decimal32 *);
+
+void
+_bid_to_dpd32 (_Decimal32 *pres, _Decimal32 *px) {
+ unsigned int sign, coefficient_x, exp, dcoeff;
+ unsigned int b2, b1, b0, b01, res;
+ _Decimal32 x = *px;
+
+ sign = (x & 0x80000000);
+ if ((x & 0x60000000ul) == 0x60000000ul) {
+ /* special encodings */
+ if ((x & 0x78000000ul) == 0x78000000ul) {
+ *pres = x; /* NaN or Infinity */
+ return;
+ }
+ /* coefficient */
+ coefficient_x = (x & 0x001ffffful) | 0x00800000ul;
+ if (coefficient_x >= 10000000) coefficient_x = 0;
+ /* get exponent */
+ exp = (x >> 21) & 0xff;
+ } else {
+ exp = (x >> 23) & 0xff;
+ coefficient_x = (x & 0x007ffffful);
+ }
+ b01 = coefficient_x / 1000;
+ b2 = coefficient_x - 1000 * b01;
+ b0 = b01 / 1000;
+ b1 = b01 - 1000 * b0;
+ dcoeff = b2d[b2] | b2d2[b1];
+ if (b0 >= 8) { /* is b0 8 or 9? */
+ res = sign | ((0x600 | ((exp >> 6) << 7) |
+ ((b0 & 1) << 6) | (exp & 0x3f)) << 20) | dcoeff;
+ } else { /* else b0 is 0..7 */
+ res = sign | ((((exp >> 6) << 9) | (b0 << 6) |
+ (exp & 0x3f)) << 20) | dcoeff;
+ }
+ *pres = res;
+}
+
+void _dpd_to_bid32 (_Decimal32 *, _Decimal32 *);
+
+void
+_dpd_to_bid32 (_Decimal32 *pres, _Decimal32 *px) {
+ unsigned int r;
+ unsigned int sign, exp, bcoeff;
+ UINT64 trailing;
+ unsigned int d0, d1, d2;
+ _Decimal32 x = *px;
+
+ sign = (x & 0x80000000);
+ trailing = (x & 0x000fffff);
+ if ((x & 0x78000000) == 0x78000000) {
+ *pres = x;
+ return;
+ } else { /* normal number */
+ if ((x & 0x60000000) == 0x60000000) { /* G0..G1 = 11 -> d0 = 8 + G4 */
+ d0 = d2b3[((x >> 26) & 1) | 8]; /* d0 = (comb & 0x0100 ? 9 : 8); */
+ exp = (x >> 27) & 3; /* exp leading bits are G2..G3 */
+ } else {
+ d0 = d2b3[(x >> 26) & 0x7];
+ exp = (x >> 29) & 3; /* exp loading bits are G0..G1 */
+ }
+ d1 = d2b2[(trailing >> 10) & 0x3ff];
+ d2 = d2b[(trailing) & 0x3ff];
+ bcoeff = d2 + d1 + d0;
+ exp = (exp << 6) + ((x >> 20) & 0x3f);
+ if (bcoeff < (1 << 23)) {
+ r = exp;
+ r <<= 23;
+ r |= (bcoeff | sign);
+ } else {
+ r = exp;
+ r <<= 21;
+ r |= (sign | 0x60000000ul);
+ /* add coeff, without leading bits */
+ r |= (((unsigned int) bcoeff) & 0x1fffff);
+ }
+ }
+ *pres = r;
+}
+
+void _bid_to_dpd64 (_Decimal64 *, _Decimal64 *);
+
+void
+_bid_to_dpd64 (_Decimal64 *pres, _Decimal64 *px) {
+ UINT64 res;
+ UINT64 sign, comb, exp, B34, B01;
+ UINT64 d103, D61;
+ UINT64 b0, b2, b3, b5;
+ unsigned int b1, b4;
+ UINT64 bcoeff;
+ UINT64 dcoeff;
+ unsigned int yhi, ylo;
+ _Decimal64 x = *px;
+
+ sign = (x & 0x8000000000000000ull);
+ comb = (x & 0x7ffc000000000000ull) >> 51;
+ if ((comb & 0xf00) == 0xf00) {
+ *pres = x;
+ return;
+ } else { /* Normal number */
+ if ((comb & 0xc00) == 0xc00) { /* G0..G1 = 11 -> exp is G2..G11 */
+ exp = (comb) & 0x3ff;
+ bcoeff = (x & 0x0007ffffffffffffull) | 0x0020000000000000ull;
+ } else {
+ exp = (comb >> 2) & 0x3ff;
+ bcoeff = (x & 0x001fffffffffffffull);
+ }
+ D61 = 2305843009ull; /* Floor(2^61 / 10^9) */
+ /* Multiply the binary coefficient by ceil(2^64 / 1000), and take the upper
+ 64-bits in order to compute a division by 1000. */
+ yhi = (D61 * (UINT64)(bcoeff >> (UINT64)27)) >> (UINT64)34;
+ ylo = bcoeff - 1000000000ull * yhi;
+ if (ylo >= 1000000000) {
+ ylo = ylo - 1000000000;
+ yhi = yhi + 1;
+ }
+ d103 = 0x4189374c;
+ B34 = ((UINT64) ylo * d103) >> (32 + 8);
+ B01 = ((UINT64) yhi * d103) >> (32 + 8);
+ b5 = ylo - B34 * 1000;
+ b2 = yhi - B01 * 1000;
+ b3 = ((UINT64) B34 * d103) >> (32 + 8);
+ b0 = ((UINT64) B01 * d103) >> (32 + 8);
+ b4 = (unsigned int) B34 - (unsigned int) b3 *1000;
+ b1 = (unsigned int) B01 - (unsigned int) dm103[b0];
+ dcoeff = b2d[b5] | b2d2[b4] | b2d3[b3] | b2d4[b2] | b2d5[b1];
+ if (b0 >= 8) /* is b0 8 or 9? */
+ res = sign | ((0x1800 | ((exp >> 8) << 9) | ((b0 & 1) << 8) |
+ (exp & 0xff)) << 50) | dcoeff;
+ else /* else b0 is 0..7 */
+ res = sign | ((((exp >> 8) << 11) | (b0 << 8) |
+ (exp & 0xff)) << 50) | dcoeff;
+ }
+ *pres = res;
+}
+
+void _dpd_to_bid64 (_Decimal64 *, _Decimal64 *);
+
+void
+_dpd_to_bid64 (_Decimal64 *pres, _Decimal64 *px) {
+ UINT64 res;
+ UINT64 sign, comb, exp;
+ UINT64 trailing;
+ UINT64 d0, d1, d2;
+ unsigned int d3, d4, d5;
+ UINT64 bcoeff, mask;
+ _Decimal64 x = *px;
+
+ sign = (x & 0x8000000000000000ull);
+ comb = (x & 0x7ffc000000000000ull) >> 50;
+ trailing = (x & 0x0003ffffffffffffull);
+ if ((comb & 0x1e00) == 0x1e00) {
+ if ((comb & 0x1f00) == 0x1f00) { /* G0..G4 = 11111 -> NaN */
+ if (comb & 0x0100) { /* G5 = 1 -> sNaN */
+ *pres = x;
+ } else { /* G5 = 0 -> qNaN */
+ *pres = x;
+ }
+ } else { /*if ((comb & 0x1e00) == 0x1e00); G0..G4 = 11110 -> INF */
+ *pres = x;
+ }
+ return;
+ } else { /* normal number */
+ if ((comb & 0x1800) == 0x1800) { /* G0..G1 = 11 -> d0 = 8 + G4 */
+ d0 = d2b6[((comb >> 8) & 1) | 8]; /* d0 = (comb & 0x0100 ? 9 : 8); */
+ exp = (comb & 0x600) >> 1; /* exp = (comb & 0x0400 ? 1 : 0) * 0x200 +
+ (comb & 0x0200 ? 1 : 0) * 0x100; exp leading bits are G2..G3 */
+ } else {
+ d0 = d2b6[(comb >> 8) & 0x7];
+ exp = (comb & 0x1800) >> 3; /* exp = (comb & 0x1000 ? 1 : 0) * 0x200 +
+ (comb & 0x0800 ? 1 : 0) * 0x100; exp loading bits are G0..G1 */
+ }
+ d1 = d2b5[(trailing >> 40) & 0x3ff];
+ d2 = d2b4[(trailing >> 30) & 0x3ff];
+ d3 = d2b3[(trailing >> 20) & 0x3ff];
+ d4 = d2b2[(trailing >> 10) & 0x3ff];
+ d5 = d2b[(trailing) & 0x3ff];
+ bcoeff = (d5 + d4 + d3) + d2 + d1 + d0;
+ exp += (comb & 0xff);
+ mask = 1;
+ mask <<= 53;
+ if (bcoeff < mask) { /* check whether coefficient fits in 10*5+3 bits */
+ res = exp;
+ res <<= 53;
+ res |= (bcoeff | sign);
+ *pres = res;
+ return;
+ }
+ /* special format */
+ res = (exp << 51) | (sign | 0x6000000000000000ull);
+ /* add coeff, without leading bits */
+ mask = (mask >> 2) - 1;
+ bcoeff &= mask;
+ res |= bcoeff;
+ }
+ *pres = res;
+}
+
+void _bid_to_dpd128 (_Decimal128 *, _Decimal128 *);
+
+void
+_bid_to_dpd128 (_Decimal128 *pres, _Decimal128 *px) {
+ UINT128 res;
+ UINT128 sign;
+ unsigned int comb;
+ UINT128 bcoeff;
+ UINT128 dcoeff;
+ UINT128 BH, d1018, BT2, BT1;
+ UINT64 exp, BL, d109;
+ UINT64 d106, d103;
+ UINT64 k1, k2, k4, k5, k7, k8, k10, k11;
+ unsigned int BHH32, BLL32, BHL32, BLH32, k0, k3, k6, k9, amount;
+ _Decimal128 x = *px;
+
+ sign.w[1] = (x.w[1] & 0x8000000000000000ull);
+ sign.w[0] = 0;
+ comb = (x.w[1] /*& 0x7fffc00000000000ull */ ) >> 46;
+ exp = 0;
+ if ((comb & 0x1e000) == 0x1e000) {
+ if ((comb & 0x1f000) == 0x1f000) { /* G0..G4 = 11111 -> NaN */
+ if (comb & 0x01000) { /* G5 = 1 -> sNaN */
+ res = x;
+ } else { /* G5 = 0 -> qNaN */
+ res = x;
+ }
+ } else { /* G0..G4 = 11110 -> INF */
+ res = x;
+ }
+ } else { /* normal number */
+ exp = ((x.w[1] & 0x7fff000000000000ull) >> 49) & 0x3fff;
+ bcoeff.w[1] = (x.w[1] & 0x0001ffffffffffffull);
+ bcoeff.w[0] = x.w[0];
+ d1018 = reciprocals10_128[18];
+ __mul_128x128_high (BH, bcoeff, d1018);
+ amount = recip_scale[18];
+ BH.w[0] = (BH.w[0] >> amount) | (BH.w[1] << (64 - amount));
+ BL = bcoeff.w[0] - BH.w[0] * 1000000000000000000ull;
+ d109 = reciprocals10_64[9];
+ __mul_64x64_to_128 (BT1, BH.w[0], d109);
+ BHH32 = (unsigned int) (BT1.w[1] >> short_recip_scale[9]);
+ BHL32 = (unsigned int) BH.w[0] - BHH32 * 1000000000;
+ __mul_64x64_to_128 (BT2, BL, d109);
+ BLH32 = (unsigned int) (BT2.w[1] >> short_recip_scale[9]);
+ BLL32 = (unsigned int) BL - BLH32 * 1000000000;
+ d106 = 0x431BDE83;
+ d103 = 0x4189374c;
+ k0 = ((UINT64) BHH32 * d106) >> (32 + 18);
+ BHH32 -= (unsigned int) k0 *1000000;
+ k1 = ((UINT64) BHH32 * d103) >> (32 + 8);
+ k2 = BHH32 - (unsigned int) k1 *1000;
+ k3 = ((UINT64) BHL32 * d106) >> (32 + 18);
+ BHL32 -= (unsigned int) k3 *1000000;
+ k4 = ((UINT64) BHL32 * d103) >> (32 + 8);
+ k5 = BHL32 - (unsigned int) k4 *1000;
+ k6 = ((UINT64) BLH32 * d106) >> (32 + 18);
+ BLH32 -= (unsigned int) k6 *1000000;
+ k7 = ((UINT64) BLH32 * d103) >> (32 + 8);
+ k8 = BLH32 - (unsigned int) k7 *1000;
+ k9 = ((UINT64) BLL32 * d106) >> (32 + 18);
+ BLL32 -= (unsigned int) k9 *1000000;
+ k10 = ((UINT64) BLL32 * d103) >> (32 + 8);
+ k11 = BLL32 - (unsigned int) k10 *1000;
+ dcoeff.w[1] = (b2d[k5] >> 4) | (b2d[k4] << 6) | (b2d[k3] << 16) |
+ (b2d[k2] << 26) | (b2d[k1] << 36);
+ dcoeff.w[0] = b2d[k11] | (b2d[k10] << 10) | (b2d[k9] << 20) |
+ (b2d[k8] << 30) | (b2d[k7] << 40) | (b2d[k6] << 50) | (b2d[k5] << 60);
+ res.w[0] = dcoeff.w[0];
+ if (k0 >= 8) {
+ res.w[1] = sign.w[1] | ((0x18000 | ((exp >> 12) << 13) |
+ ((k0 & 1) << 12) | (exp & 0xfff)) << 46) | dcoeff.w[1];
+ } else {
+ res.w[1] = sign.w[1] | ((((exp >> 12) << 15) | (k0 << 12) |
+ (exp & 0xfff)) << 46) | dcoeff.w[1];
+ }
+ }
+ *pres = res;
+}
+
+void _dpd_to_bid128 (_Decimal128 *, _Decimal128 *);
+
+void
+_dpd_to_bid128 (_Decimal128 *pres, _Decimal128 *px) {
+ UINT128 res;
+ UINT128 sign;
+ UINT64 exp, comb;
+ UINT128 trailing;
+ UINT64 d0, d1, d2, d3, d4, d5, d6, d7, d8, d9, d10, d11;
+ UINT128 bcoeff;
+ UINT64 tl, th;
+ _Decimal128 x = *px;
+
+ sign.w[1] = (x.w[1] & 0x8000000000000000ull);
+ sign.w[0] = 0;
+ comb = (x.w[1] & 0x7fffc00000000000ull) >> 46;
+ trailing.w[1] = x.w[1];
+ trailing.w[0] = x.w[0];
+ if ((comb & 0x1e000) == 0x1e000) {
+ if ((comb & 0x1f000) == 0x1f000) { /* G0..G4 = 11111 -> NaN */
+ if (comb & 0x01000) { /* G5 = 1 -> sNaN */
+ *pres = x;
+ } else { /* G5 = 0 -> qNaN */
+ *pres = x;
+ }
+ } else { /* G0..G4 = 11110 -> INF */
+ *pres = x;
+ }
+ return;
+ } else { /* Normal number */
+ if ((comb & 0x18000) == 0x18000) { /* G0..G1 = 11 -> d0 = 8 + G4 */
+ d0 = d2b6[8 + ((comb & 0x01000) >> 12)];
+ exp = (comb & 0x06000) >> 1; /* exp leading bits are G2..G3 */
+ } else {
+ d0 = d2b6[((comb & 0x07000) >> 12)];
+ exp = (comb & 0x18000) >> 3; /* exp loading bits are G0..G1 */
+ }
+ d11 = d2b[(trailing.w[0]) & 0x3ff];
+ d10 = d2b2[(trailing.w[0] >> 10) & 0x3ff];
+ d9 = d2b3[(trailing.w[0] >> 20) & 0x3ff];
+ d8 = d2b4[(trailing.w[0] >> 30) & 0x3ff];
+ d7 = d2b5[(trailing.w[0] >> 40) & 0x3ff];
+ d6 = d2b6[(trailing.w[0] >> 50) & 0x3ff];
+ d5 = d2b[(trailing.w[0] >> 60) | ((trailing.w[1] & 0x3f) << 4)];
+ d4 = d2b2[(trailing.w[1] >> 6) & 0x3ff];
+ d3 = d2b3[(trailing.w[1] >> 16) & 0x3ff];
+ d2 = d2b4[(trailing.w[1] >> 26) & 0x3ff];
+ d1 = d2b5[(trailing.w[1] >> 36) & 0x3ff];
+ tl = d11 + d10 + d9 + d8 + d7 + d6;
+ th = d5 + d4 + d3 + d2 + d1 + d0;
+ __mul_64x64_to_128 (bcoeff, th, 1000000000000000000ull);
+ __add_128_64 (bcoeff, bcoeff, tl);
+ exp += (comb & 0xfff);
+ res.w[0] = bcoeff.w[0];
+ res.w[1] = (exp << 49) | sign.w[1] | bcoeff.w[1];
+ }
+ *pres = res;
+}
diff --git a/libdecnumber/bid/bid2dpd_dpd2bid.h b/libdecnumber/bid/bid2dpd_dpd2bid.h
new file mode 100644
index 0000000..7728cff
--- /dev/null
+++ b/libdecnumber/bid/bid2dpd_dpd2bid.h
@@ -0,0 +1,10407 @@
+/* Copyright (C) 2007 Free Software Foundation, Inc.
+
+This file is part of GCC.
+
+GCC is free software; you can redistribute it and/or modify it under
+the terms of the GNU General Public License as published by the Free
+Software Foundation; either version 2, or (at your option) any later
+version.
+
+In addition to the permissions in the GNU General Public License, the
+Free Software Foundation gives you unlimited permission to link the
+compiled version of this file into combinations with other programs,
+and to distribute those combinations without any restriction coming
+from the use of this file. (The General Public License restrictions
+do apply in other respects; for example, they cover modification of
+the file, and distribution when not linked into a combine
+executable.)
+
+GCC is distributed in the hope that it will be useful, but WITHOUT ANY
+WARRANTY; without even the implied warranty of MERCHANTABILITY or
+FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
+for more details.
+
+You should have received a copy of the GNU General Public License
+along with GCC; see the file COPYING. If not, write to the Free
+Software Foundation, 51 Franklin Street, Fifth Floor, Boston, MA
+02110-1301, USA. */
+
+static const UINT128 reciprocals10_128[] = {
+ { { 0ull, 0ull } }, /* 0 extra digits */
+ { { 0x3333333333333334ull ,0x3333333333333333ull } }, /* 1 extra digit */
+ { { 0x51eb851eb851eb86ull ,0x051eb851eb851eb8ull } }, /* 2 extra digits */
+ { { 0x3b645a1cac083127ull, 0x0083126e978d4fdfull } }, /* 3 extra digits */
+ { { 0x4af4f0d844d013aaULL, 0x00346dc5d6388659ULL } }, /* 10^(-4) * 2^131 */
+ { { 0x08c3f3e0370cdc88ULL, 0x0029f16b11c6d1e1ULL } }, /* 10^(-5) * 2^134 */
+ { { 0x6d698fe69270b06dULL, 0x00218def416bdb1aULL } }, /* 10^(-6) * 2^137 */
+ { { 0xaf0f4ca41d811a47ULL, 0x0035afe535795e90ULL } }, /* 10^(-7) * 2^141 */
+ { { 0xbf3f70834acdaea0ULL, 0x002af31dc4611873ULL } }, /* 10^(-8) * 2^144 */
+ { { 0x65cc5a02a23e254dULL, 0x00225c17d04dad29ULL } }, /* 10^(-9) * 2^147 */
+ { { 0x6fad5cd10396a214ULL, 0x0036f9bfb3af7b75ULL } }, /* 10^(-10) * 2^151 */
+ { { 0xbfbde3da69454e76ULL, 0x002bfaffc2f2c92aULL } }, /* 10^(-11) * 2^154 */
+ { { 0x32fe4fe1edd10b92ULL, 0x00232f33025bd422ULL } }, /* 10^(-12) * 2^157 */
+ { { 0x84ca19697c81ac1cULL, 0x00384b84d092ed03ULL } }, /* 10^(-13) * 2^161 */
+ { { 0x03d4e1213067bce4ULL, 0x002d09370d425736ULL } }, /* 10^(-14) * 2^164 */
+ { { 0x3643e74dc052fd83ULL, 0x0024075f3dceac2bULL } }, /* 10^(-15) * 2^167 */
+ { { 0x56d30baf9a1e626bULL, 0x0039a5652fb11378ULL } }, /* 10^(-16) * 2^171 */
+ { { 0x12426fbfae7eb522ULL, 0x002e1dea8c8da92dULL } }, /* 10^(-17) * 2^174 */
+ { { 0x41cebfcc8b9890e8ULL, 0x0024e4bba3a48757ULL } }, /* 10^(-18) * 2^177 */
+ { { 0x694acc7a78f41b0dULL, 0x003b07929f6da558ULL } }, /* 10^(-19) * 2^181 */
+ { { 0xbaa23d2ec729af3eULL, 0x002f394219248446ULL } }, /* 10^(-20) * 2^184 */
+ { { 0xfbb4fdbf05baf298ULL, 0x0025c768141d369eULL } }, /* 10^(-21) * 2^187 */
+ { { 0x2c54c931a2c4b759ULL, 0x003c7240202ebdcbULL } }, /* 10^(-22) * 2^191 */
+ { { 0x89dd6dc14f03c5e1ULL, 0x00305b66802564a2ULL } }, /* 10^(-23) * 2^194 */
+ { { 0xd4b1249aa59c9e4eULL, 0x0026af8533511d4eULL } }, /* 10^(-24) * 2^197 */
+ { { 0x544ea0f76f60fd49ULL, 0x003de5a1ebb4fbb1ULL } }, /* 10^(-25) * 2^201 */
+ { { 0x76a54d92bf80caa1ULL, 0x00318481895d9627ULL } }, /* 10^(-26) * 2^204 */
+ { { 0x921dd7a89933d54eULL, 0x00279d346de4781fULL } }, /* 10^(-27) * 2^207 */
+ { { 0x8362f2a75b862215ULL, 0x003f61ed7ca0c032ULL } }, /* 10^(-28) * 2^211 */
+ { { 0xcf825bb91604e811ULL, 0x0032b4bdfd4d668eULL } }, /* 10^(-29) * 2^214 */
+ { { 0x0c684960de6a5341ULL, 0x00289097fdd7853fULL } }, /* 10^(-30) * 2^217 */
+ { { 0x3d203ab3e521dc34ULL, 0x002073accb12d0ffULL } }, /* 10^(-31) * 2^220 */
+ { { 0x2e99f7863b696053ULL, 0x0033ec47ab514e65ULL } }, /* 10^(-32) * 2^224 */
+ { { 0x587b2c6b62bab376ULL, 0x002989d2ef743eb7ULL } }, /* 10^(-33) * 2^227 */
+ { { 0xad2f56bc4efbc2c5ULL, 0x00213b0f25f69892ULL } }, /* 10^(-34) * 2^230 */
+ { { 0x0f2abc9d8c9689d1ull, 0x01a95a5b7f87a0efull } } /* 35 extra digits */
+};
+
+static const int recip_scale[] = {
+ 129 - 128, /* 1 */
+ 129 - 128, /* 1/10 */
+ 129 - 128, /* 1/10^2 */
+ 129 - 128, /* 1/10^3 */
+ 3, /* 131 - 128 */
+ 6, /* 134 - 128 */
+ 9, /* 137 - 128 */
+ 13, /* 141 - 128 */
+ 16, /* 144 - 128 */
+ 19, /* 147 - 128 */
+ 23, /* 151 - 128 */
+ 26, /* 154 - 128 */
+ 29, /* 157 - 128 */
+ 33, /* 161 - 128 */
+ 36, /* 164 - 128 */
+ 39, /* 167 - 128 */
+ 43, /* 171 - 128 */
+ 46, /* 174 - 128 */
+ 49, /* 177 - 128 */
+ 53, /* 181 - 128 */
+ 56, /* 184 - 128 */
+ 59, /* 187 - 128 */
+ 63, /* 191 - 128 */
+
+ 66, /* 194 - 128 */
+ 69, /* 197 - 128 */
+ 73, /* 201 - 128 */
+ 76, /* 204 - 128 */
+ 79, /* 207 - 128 */
+ 83, /* 211 - 128 */
+ 86, /* 214 - 128 */
+ 89, /* 217 - 128 */
+ 92, /* 220 - 128 */
+ 96, /* 224 - 128 */
+ 99, /* 227 - 128 */
+ 102, /* 230 - 128 */
+ 237 - 128, /* 1/10^35 */
+};
+
+static const int short_recip_scale[] = {
+ 1,
+ 65 - 64,
+ 69 - 64,
+ 71 - 64,
+ 75 - 64,
+ 78 - 64,
+ 81 - 64,
+ 85 - 64,
+ 88 - 64,
+ 91 - 64,
+ 95 - 64,
+ 98 - 64,
+ 101 - 64,
+ 105 - 64,
+ 108 - 64,
+ 111 - 64,
+ 115 - 64, /* 114 - 64 */
+ 118 - 64
+};
+
+static const unsigned long long reciprocals10_64[] = {
+ 1ull, /* dummy value for 0 extra digits */
+ 0x3333333333333334ull, /* 1 extra digit */
+ 0x51eb851eb851eb86ull,
+ 0x20c49ba5e353f7cfull,
+ 0x346dc5d63886594bull,
+ 0x29f16b11c6d1e109ull,
+ 0x218def416bdb1a6eull,
+ 0x35afe535795e90b0ull,
+ 0x2af31dc4611873c0ull,
+ 0x225c17d04dad2966ull,
+ 0x36f9bfb3af7b7570ull,
+ 0x2bfaffc2f2c92ac0ull,
+ 0x232f33025bd42233ull,
+ 0x384b84d092ed0385ull,
+ 0x2d09370d42573604ull,
+ 0x24075f3dceac2b37ull,
+ 0x39a5652fb1137857ull,
+ 0x2e1dea8c8da92d13ull
+};
+
+static const UINT64 d2b[] = {
+ 0, 1, 2, 3, 4, 5, 6, 7,
+ 8, 9, 80, 81, 800, 801, 880, 881,
+ 10, 11, 12, 13, 14, 15, 16, 17,
+ 18, 19, 90, 91, 810, 811, 890, 891,
+ 20, 21, 22, 23, 24, 25, 26, 27,
+ 28, 29, 82, 83, 820, 821, 808, 809,
+ 30, 31, 32, 33, 34, 35, 36, 37,
+ 38, 39, 92, 93, 830, 831, 818, 819,
+ 40, 41, 42, 43, 44, 45, 46, 47,
+ 48, 49, 84, 85, 840, 841, 88, 89,
+ 50, 51, 52, 53, 54, 55, 56, 57,
+ 58, 59, 94, 95, 850, 851, 98, 99,
+ 60, 61, 62, 63, 64, 65, 66, 67,
+ 68, 69, 86, 87, 860, 861, 888, 889,
+ 70, 71, 72, 73, 74, 75, 76, 77,
+ 78, 79, 96, 97, 870, 871, 898, 899,
+ 100, 101, 102, 103, 104, 105, 106, 107,
+ 108, 109, 180, 181, 900, 901, 980, 981,
+ 110, 111, 112, 113, 114, 115, 116, 117,
+ 118, 119, 190, 191, 910, 911, 990, 991,
+ 120, 121, 122, 123, 124, 125, 126, 127,
+ 128, 129, 182, 183, 920, 921, 908, 909,
+ 130, 131, 132, 133, 134, 135, 136, 137,
+ 138, 139, 192, 193, 930, 931, 918, 919,
+ 140, 141, 142, 143, 144, 145, 146, 147,
+ 148, 149, 184, 185, 940, 941, 188, 189,
+ 150, 151, 152, 153, 154, 155, 156, 157,
+ 158, 159, 194, 195, 950, 951, 198, 199,
+ 160, 161, 162, 163, 164, 165, 166, 167,
+ 168, 169, 186, 187, 960, 961, 988, 989,
+ 170, 171, 172, 173, 174, 175, 176, 177,
+ 178, 179, 196, 197, 970, 971, 998, 999,
+ 200, 201, 202, 203, 204, 205, 206, 207,
+ 208, 209, 280, 281, 802, 803, 882, 883,
+ 210, 211, 212, 213, 214, 215, 216, 217,
+ 218, 219, 290, 291, 812, 813, 892, 893,
+ 220, 221, 222, 223, 224, 225, 226, 227,
+ 228, 229, 282, 283, 822, 823, 828, 829,
+ 230, 231, 232, 233, 234, 235, 236, 237,
+ 238, 239, 292, 293, 832, 833, 838, 839,
+ 240, 241, 242, 243, 244, 245, 246, 247,
+ 248, 249, 284, 285, 842, 843, 288, 289,
+ 250, 251, 252, 253, 254, 255, 256, 257,
+ 258, 259, 294, 295, 852, 853, 298, 299,
+ 260, 261, 262, 263, 264, 265, 266, 267,
+ 268, 269, 286, 287, 862, 863, 888, 889,
+ 270, 271, 272, 273, 274, 275, 276, 277,
+ 278, 279, 296, 297, 872, 873, 898, 899,
+ 300, 301, 302, 303, 304, 305, 306, 307,
+ 308, 309, 380, 381, 902, 903, 982, 983,
+ 310, 311, 312, 313, 314, 315, 316, 317,
+ 318, 319, 390, 391, 912, 913, 992, 993,
+ 320, 321, 322, 323, 324, 325, 326, 327,
+ 328, 329, 382, 383, 922, 923, 928, 929,
+ 330, 331, 332, 333, 334, 335, 336, 337,
+ 338, 339, 392, 393, 932, 933, 938, 939,
+ 340, 341, 342, 343, 344, 345, 346, 347,
+ 348, 349, 384, 385, 942, 943, 388, 389,
+ 350, 351, 352, 353, 354, 355, 356, 357,
+ 358, 359, 394, 395, 952, 953, 398, 399,
+ 360, 361, 362, 363, 364, 365, 366, 367,
+ 368, 369, 386, 387, 962, 963, 988, 989,
+ 370, 371, 372, 373, 374, 375, 376, 377,
+ 378, 379, 396, 397, 972, 973, 998, 999,
+ 400, 401, 402, 403, 404, 405, 406, 407,
+ 408, 409, 480, 481, 804, 805, 884, 885,
+ 410, 411, 412, 413, 414, 415, 416, 417,
+ 418, 419, 490, 491, 814, 815, 894, 895,
+ 420, 421, 422, 423, 424, 425, 426, 427,
+ 428, 429, 482, 483, 824, 825, 848, 849,
+ 430, 431, 432, 433, 434, 435, 436, 437,
+ 438, 439, 492, 493, 834, 835, 858, 859,
+ 440, 441, 442, 443, 444, 445, 446, 447,
+ 448, 449, 484, 485, 844, 845, 488, 489,
+ 450, 451, 452, 453, 454, 455, 456, 457,
+ 458, 459, 494, 495, 854, 855, 498, 499,
+ 460, 461, 462, 463, 464, 465, 466, 467,
+ 468, 469, 486, 487, 864, 865, 888, 889,
+ 470, 471, 472, 473, 474, 475, 476, 477,
+ 478, 479, 496, 497, 874, 875, 898, 899,
+ 500, 501, 502, 503, 504, 505, 506, 507,
+ 508, 509, 580, 581, 904, 905, 984, 985,
+ 510, 511, 512, 513, 514, 515, 516, 517,
+ 518, 519, 590, 591, 914, 915, 994, 995,
+ 520, 521, 522, 523, 524, 525, 526, 527,
+ 528, 529, 582, 583, 924, 925, 948, 949,
+ 530, 531, 532, 533, 534, 535, 536, 537,
+ 538, 539, 592, 593, 934, 935, 958, 959,
+ 540, 541, 542, 543, 544, 545, 546, 547,
+ 548, 549, 584, 585, 944, 945, 588, 589,
+ 550, 551, 552, 553, 554, 555, 556, 557,
+ 558, 559, 594, 595, 954, 955, 598, 599,
+ 560, 561, 562, 563, 564, 565, 566, 567,
+ 568, 569, 586, 587, 964, 965, 988, 989,
+ 570, 571, 572, 573, 574, 575, 576, 577,
+ 578, 579, 596, 597, 974, 975, 998, 999,
+ 600, 601, 602, 603, 604, 605, 606, 607,
+ 608, 609, 680, 681, 806, 807, 886, 887,
+ 610, 611, 612, 613, 614, 615, 616, 617,
+ 618, 619, 690, 691, 816, 817, 896, 897,
+ 620, 621, 622, 623, 624, 625, 626, 627,
+ 628, 629, 682, 683, 826, 827, 868, 869,
+ 630, 631, 632, 633, 634, 635, 636, 637,
+ 638, 639, 692, 693, 836, 837, 878, 879,
+ 640, 641, 642, 643, 644, 645, 646, 647,
+ 648, 649, 684, 685, 846, 847, 688, 689,
+ 650, 651, 652, 653, 654, 655, 656, 657,
+ 658, 659, 694, 695, 856, 857, 698, 699,
+ 660, 661, 662, 663, 664, 665, 666, 667,
+ 668, 669, 686, 687, 866, 867, 888, 889,
+ 670, 671, 672, 673, 674, 675, 676, 677,
+ 678, 679, 696, 697, 876, 877, 898, 899,
+ 700, 701, 702, 703, 704, 705, 706, 707,
+ 708, 709, 780, 781, 906, 907, 986, 987,
+ 710, 711, 712, 713, 714, 715, 716, 717,
+ 718, 719, 790, 791, 916, 917, 996, 997,
+ 720, 721, 722, 723, 724, 725, 726, 727,
+ 728, 729, 782, 783, 926, 927, 968, 969,
+ 730, 731, 732, 733, 734, 735, 736, 737,
+ 738, 739, 792, 793, 936, 937, 978, 979,
+ 740, 741, 742, 743, 744, 745, 746, 747,
+ 748, 749, 784, 785, 946, 947, 788, 789,
+ 750, 751, 752, 753, 754, 755, 756, 757,
+ 758, 759, 794, 795, 956, 957, 798, 799,
+ 760, 761, 762, 763, 764, 765, 766, 767,
+ 768, 769, 786, 787, 966, 967, 988, 989,
+ 770, 771, 772, 773, 774, 775, 776, 777,
+ 778, 779, 796, 797, 976, 977, 998, 999 };
+
+static const UINT64 d2b2[] = {
+ 0000ull, 1000ull, 2000ull, 3000ull,
+ 4000ull, 5000ull, 6000ull, 7000ull,
+ 8000ull, 9000ull, 80000ull, 81000ull,
+ 800000ull, 801000ull, 880000ull, 881000ull,
+ 10000ull, 11000ull, 12000ull, 13000ull,
+ 14000ull, 15000ull, 16000ull, 17000ull,
+ 18000ull, 19000ull, 90000ull, 91000ull,
+ 810000ull, 811000ull, 890000ull, 891000ull,
+ 20000ull, 21000ull, 22000ull, 23000ull,
+ 24000ull, 25000ull, 26000ull, 27000ull,
+ 28000ull, 29000ull, 82000ull, 83000ull,
+ 820000ull, 821000ull, 808000ull, 809000ull,
+ 30000ull, 31000ull, 32000ull, 33000ull,
+ 34000ull, 35000ull, 36000ull, 37000ull,
+ 38000ull, 39000ull, 92000ull, 93000ull,
+ 830000ull, 831000ull, 818000ull, 819000ull,
+ 40000ull, 41000ull, 42000ull, 43000ull,
+ 44000ull, 45000ull, 46000ull, 47000ull,
+ 48000ull, 49000ull, 84000ull, 85000ull,
+ 840000ull, 841000ull, 88000ull, 89000ull,
+ 50000ull, 51000ull, 52000ull, 53000ull,
+ 54000ull, 55000ull, 56000ull, 57000ull,
+ 58000ull, 59000ull, 94000ull, 95000ull,
+ 850000ull, 851000ull, 98000ull, 99000ull,
+ 60000ull, 61000ull, 62000ull, 63000ull,
+ 64000ull, 65000ull, 66000ull, 67000ull,
+ 68000ull, 69000ull, 86000ull, 87000ull,
+ 860000ull, 861000ull, 888000ull, 889000ull,
+ 70000ull, 71000ull, 72000ull, 73000ull,
+ 74000ull, 75000ull, 76000ull, 77000ull,
+ 78000ull, 79000ull, 96000ull, 97000ull,
+ 870000ull, 871000ull, 898000ull, 899000ull,
+ 100000ull, 101000ull, 102000ull, 103000ull,
+ 104000ull, 105000ull, 106000ull, 107000ull,
+ 108000ull, 109000ull, 180000ull, 181000ull,
+ 900000ull, 901000ull, 980000ull, 981000ull,
+ 110000ull, 111000ull, 112000ull, 113000ull,
+ 114000ull, 115000ull, 116000ull, 117000ull,
+ 118000ull, 119000ull, 190000ull, 191000ull,
+ 910000ull, 911000ull, 990000ull, 991000ull,
+ 120000ull, 121000ull, 122000ull, 123000ull,
+ 124000ull, 125000ull, 126000ull, 127000ull,
+ 128000ull, 129000ull, 182000ull, 183000ull,
+ 920000ull, 921000ull, 908000ull, 909000ull,
+ 130000ull, 131000ull, 132000ull, 133000ull,
+ 134000ull, 135000ull, 136000ull, 137000ull,
+ 138000ull, 139000ull, 192000ull, 193000ull,
+ 930000ull, 931000ull, 918000ull, 919000ull,
+ 140000ull, 141000ull, 142000ull, 143000ull,
+ 144000ull, 145000ull, 146000ull, 147000ull,
+ 148000ull, 149000ull, 184000ull, 185000ull,
+ 940000ull, 941000ull, 188000ull, 189000ull,
+ 150000ull, 151000ull, 152000ull, 153000ull,
+ 154000ull, 155000ull, 156000ull, 157000ull,
+ 158000ull, 159000ull, 194000ull, 195000ull,
+ 950000ull, 951000ull, 198000ull, 199000ull,
+ 160000ull, 161000ull, 162000ull, 163000ull,
+ 164000ull, 165000ull, 166000ull, 167000ull,
+ 168000ull, 169000ull, 186000ull, 187000ull,
+ 960000ull, 961000ull, 988000ull, 989000ull,
+ 170000ull, 171000ull, 172000ull, 173000ull,
+ 174000ull, 175000ull, 176000ull, 177000ull,
+ 178000ull, 179000ull, 196000ull, 197000ull,
+ 970000ull, 971000ull, 998000ull, 999000ull,
+ 200000ull, 201000ull, 202000ull, 203000ull,
+ 204000ull, 205000ull, 206000ull, 207000ull,
+ 208000ull, 209000ull, 280000ull, 281000ull,
+ 802000ull, 803000ull, 882000ull, 883000ull,
+ 210000ull, 211000ull, 212000ull, 213000ull,
+ 214000ull, 215000ull, 216000ull, 217000ull,
+ 218000ull, 219000ull, 290000ull, 291000ull,
+ 812000ull, 813000ull, 892000ull, 893000ull,
+ 220000ull, 221000ull, 222000ull, 223000ull,
+ 224000ull, 225000ull, 226000ull, 227000ull,
+ 228000ull, 229000ull, 282000ull, 283000ull,
+ 822000ull, 823000ull, 828000ull, 829000ull,
+ 230000ull, 231000ull, 232000ull, 233000ull,
+ 234000ull, 235000ull, 236000ull, 237000ull,
+ 238000ull, 239000ull, 292000ull, 293000ull,
+ 832000ull, 833000ull, 838000ull, 839000ull,
+ 240000ull, 241000ull, 242000ull, 243000ull,
+ 244000ull, 245000ull, 246000ull, 247000ull,
+ 248000ull, 249000ull, 284000ull, 285000ull,
+ 842000ull, 843000ull, 288000ull, 289000ull,
+ 250000ull, 251000ull, 252000ull, 253000ull,
+ 254000ull, 255000ull, 256000ull, 257000ull,
+ 258000ull, 259000ull, 294000ull, 295000ull,
+ 852000ull, 853000ull, 298000ull, 299000ull,
+ 260000ull, 261000ull, 262000ull, 263000ull,
+ 264000ull, 265000ull, 266000ull, 267000ull,
+ 268000ull, 269000ull, 286000ull, 287000ull,
+ 862000ull, 863000ull, 888000ull, 889000ull,
+ 270000ull, 271000ull, 272000ull, 273000ull,
+ 274000ull, 275000ull, 276000ull, 277000ull,
+ 278000ull, 279000ull, 296000ull, 297000ull,
+ 872000ull, 873000ull, 898000ull, 899000ull,
+ 300000ull, 301000ull, 302000ull, 303000ull,
+ 304000ull, 305000ull, 306000ull, 307000ull,
+ 308000ull, 309000ull, 380000ull, 381000ull,
+ 902000ull, 903000ull, 982000ull, 983000ull,
+ 310000ull, 311000ull, 312000ull, 313000ull,
+ 314000ull, 315000ull, 316000ull, 317000ull,
+ 318000ull, 319000ull, 390000ull, 391000ull,
+ 912000ull, 913000ull, 992000ull, 993000ull,
+ 320000ull, 321000ull, 322000ull, 323000ull,
+ 324000ull, 325000ull, 326000ull, 327000ull,
+ 328000ull, 329000ull, 382000ull, 383000ull,
+ 922000ull, 923000ull, 928000ull, 929000ull,
+ 330000ull, 331000ull, 332000ull, 333000ull,
+ 334000ull, 335000ull, 336000ull, 337000ull,
+ 338000ull, 339000ull, 392000ull, 393000ull,
+ 932000ull, 933000ull, 938000ull, 939000ull,
+ 340000ull, 341000ull, 342000ull, 343000ull,
+ 344000ull, 345000ull, 346000ull, 347000ull,
+ 348000ull, 349000ull, 384000ull, 385000ull,
+ 942000ull, 943000ull, 388000ull, 389000ull,
+ 350000ull, 351000ull, 352000ull, 353000ull,
+ 354000ull, 355000ull, 356000ull, 357000ull,
+ 358000ull, 359000ull, 394000ull, 395000ull,
+ 952000ull, 953000ull, 398000ull, 399000ull,
+ 360000ull, 361000ull, 362000ull, 363000ull,
+ 364000ull, 365000ull, 366000ull, 367000ull,
+ 368000ull, 369000ull, 386000ull, 387000ull,
+ 962000ull, 963000ull, 988000ull, 989000ull,
+ 370000ull, 371000ull, 372000ull, 373000ull,
+ 374000ull, 375000ull, 376000ull, 377000ull,
+ 378000ull, 379000ull, 396000ull, 397000ull,
+ 972000ull, 973000ull, 998000ull, 999000ull,
+ 400000ull, 401000ull, 402000ull, 403000ull,
+ 404000ull, 405000ull, 406000ull, 407000ull,
+ 408000ull, 409000ull, 480000ull, 481000ull,
+ 804000ull, 805000ull, 884000ull, 885000ull,
+ 410000ull, 411000ull, 412000ull, 413000ull,
+ 414000ull, 415000ull, 416000ull, 417000ull,
+ 418000ull, 419000ull, 490000ull, 491000ull,
+ 814000ull, 815000ull, 894000ull, 895000ull,
+ 420000ull, 421000ull, 422000ull, 423000ull,
+ 424000ull, 425000ull, 426000ull, 427000ull,
+ 428000ull, 429000ull, 482000ull, 483000ull,
+ 824000ull, 825000ull, 848000ull, 849000ull,
+ 430000ull, 431000ull, 432000ull, 433000ull,
+ 434000ull, 435000ull, 436000ull, 437000ull,
+ 438000ull, 439000ull, 492000ull, 493000ull,
+ 834000ull, 835000ull, 858000ull, 859000ull,
+ 440000ull, 441000ull, 442000ull, 443000ull,
+ 444000ull, 445000ull, 446000ull, 447000ull,
+ 448000ull, 449000ull, 484000ull, 485000ull,
+ 844000ull, 845000ull, 488000ull, 489000ull,
+ 450000ull, 451000ull, 452000ull, 453000ull,
+ 454000ull, 455000ull, 456000ull, 457000ull,
+ 458000ull, 459000ull, 494000ull, 495000ull,
+ 854000ull, 855000ull, 498000ull, 499000ull,
+ 460000ull, 461000ull, 462000ull, 463000ull,
+ 464000ull, 465000ull, 466000ull, 467000ull,
+ 468000ull, 469000ull, 486000ull, 487000ull,
+ 864000ull, 865000ull, 888000ull, 889000ull,
+ 470000ull, 471000ull, 472000ull, 473000ull,
+ 474000ull, 475000ull, 476000ull, 477000ull,
+ 478000ull, 479000ull, 496000ull, 497000ull,
+ 874000ull, 875000ull, 898000ull, 899000ull,
+ 500000ull, 501000ull, 502000ull, 503000ull,
+ 504000ull, 505000ull, 506000ull, 507000ull,
+ 508000ull, 509000ull, 580000ull, 581000ull,
+ 904000ull, 905000ull, 984000ull, 985000ull,
+ 510000ull, 511000ull, 512000ull, 513000ull,
+ 514000ull, 515000ull, 516000ull, 517000ull,
+ 518000ull, 519000ull, 590000ull, 591000ull,
+ 914000ull, 915000ull, 994000ull, 995000ull,
+ 520000ull, 521000ull, 522000ull, 523000ull,
+ 524000ull, 525000ull, 526000ull, 527000ull,
+ 528000ull, 529000ull, 582000ull, 583000ull,
+ 924000ull, 925000ull, 948000ull, 949000ull,
+ 530000ull, 531000ull, 532000ull, 533000ull,
+ 534000ull, 535000ull, 536000ull, 537000ull,
+ 538000ull, 539000ull, 592000ull, 593000ull,
+ 934000ull, 935000ull, 958000ull, 959000ull,
+ 540000ull, 541000ull, 542000ull, 543000ull,
+ 544000ull, 545000ull, 546000ull, 547000ull,
+ 548000ull, 549000ull, 584000ull, 585000ull,
+ 944000ull, 945000ull, 588000ull, 589000ull,
+ 550000ull, 551000ull, 552000ull, 553000ull,
+ 554000ull, 555000ull, 556000ull, 557000ull,
+ 558000ull, 559000ull, 594000ull, 595000ull,
+ 954000ull, 955000ull, 598000ull, 599000ull,
+ 560000ull, 561000ull, 562000ull, 563000ull,
+ 564000ull, 565000ull, 566000ull, 567000ull,
+ 568000ull, 569000ull, 586000ull, 587000ull,
+ 964000ull, 965000ull, 988000ull, 989000ull,
+ 570000ull, 571000ull, 572000ull, 573000ull,
+ 574000ull, 575000ull, 576000ull, 577000ull,
+ 578000ull, 579000ull, 596000ull, 597000ull,
+ 974000ull, 975000ull, 998000ull, 999000ull,
+ 600000ull, 601000ull, 602000ull, 603000ull,
+ 604000ull, 605000ull, 606000ull, 607000ull,
+ 608000ull, 609000ull, 680000ull, 681000ull,
+ 806000ull, 807000ull, 886000ull, 887000ull,
+ 610000ull, 611000ull, 612000ull, 613000ull,
+ 614000ull, 615000ull, 616000ull, 617000ull,
+ 618000ull, 619000ull, 690000ull, 691000ull,
+ 816000ull, 817000ull, 896000ull, 897000ull,
+ 620000ull, 621000ull, 622000ull, 623000ull,
+ 624000ull, 625000ull, 626000ull, 627000ull,
+ 628000ull, 629000ull, 682000ull, 683000ull,
+ 826000ull, 827000ull, 868000ull, 869000ull,
+ 630000ull, 631000ull, 632000ull, 633000ull,
+ 634000ull, 635000ull, 636000ull, 637000ull,
+ 638000ull, 639000ull, 692000ull, 693000ull,
+ 836000ull, 837000ull, 878000ull, 879000ull,
+ 640000ull, 641000ull, 642000ull, 643000ull,
+ 644000ull, 645000ull, 646000ull, 647000ull,
+ 648000ull, 649000ull, 684000ull, 685000ull,
+ 846000ull, 847000ull, 688000ull, 689000ull,
+ 650000ull, 651000ull, 652000ull, 653000ull,
+ 654000ull, 655000ull, 656000ull, 657000ull,
+ 658000ull, 659000ull, 694000ull, 695000ull,
+ 856000ull, 857000ull, 698000ull, 699000ull,
+ 660000ull, 661000ull, 662000ull, 663000ull,
+ 664000ull, 665000ull, 666000ull, 667000ull,
+ 668000ull, 669000ull, 686000ull, 687000ull,
+ 866000ull, 867000ull, 888000ull, 889000ull,
+ 670000ull, 671000ull, 672000ull, 673000ull,
+ 674000ull, 675000ull, 676000ull, 677000ull,
+ 678000ull, 679000ull, 696000ull, 697000ull,
+ 876000ull, 877000ull, 898000ull, 899000ull,
+ 700000ull, 701000ull, 702000ull, 703000ull,
+ 704000ull, 705000ull, 706000ull, 707000ull,
+ 708000ull, 709000ull, 780000ull, 781000ull,
+ 906000ull, 907000ull, 986000ull, 987000ull,
+ 710000ull, 711000ull, 712000ull, 713000ull,
+ 714000ull, 715000ull, 716000ull, 717000ull,
+ 718000ull, 719000ull, 790000ull, 791000ull,
+ 916000ull, 917000ull, 996000ull, 997000ull,
+ 720000ull, 721000ull, 722000ull, 723000ull,
+ 724000ull, 725000ull, 726000ull, 727000ull,
+ 728000ull, 729000ull, 782000ull, 783000ull,
+ 926000ull, 927000ull, 968000ull, 969000ull,
+ 730000ull, 731000ull, 732000ull, 733000ull,
+ 734000ull, 735000ull, 736000ull, 737000ull,
+ 738000ull, 739000ull, 792000ull, 793000ull,
+ 936000ull, 937000ull, 978000ull, 979000ull,
+ 740000ull, 741000ull, 742000ull, 743000ull,
+ 744000ull, 745000ull, 746000ull, 747000ull,
+ 748000ull, 749000ull, 784000ull, 785000ull,
+ 946000ull, 947000ull, 788000ull, 789000ull,
+ 750000ull, 751000ull, 752000ull, 753000ull,
+ 754000ull, 755000ull, 756000ull, 757000ull,
+ 758000ull, 759000ull, 794000ull, 795000ull,
+ 956000ull, 957000ull, 798000ull, 799000ull,
+ 760000ull, 761000ull, 762000ull, 763000ull,
+ 764000ull, 765000ull, 766000ull, 767000ull,
+ 768000ull, 769000ull, 786000ull, 787000ull,
+ 966000ull, 967000ull, 988000ull, 989000ull,
+ 770000ull, 771000ull, 772000ull, 773000ull,
+ 774000ull, 775000ull, 776000ull, 777000ull,
+ 778000ull, 779000ull, 796000ull, 797000ull,
+ 976000ull, 977000ull, 998000ull, 999000ull
+};
+
+static const UINT64 d2b3[] = {
+ 0000000ull,
+ 1000000ull,
+ 2000000ull,
+ 3000000ull,
+ 4000000ull,
+ 5000000ull,
+ 6000000ull,
+ 7000000ull,
+ 8000000ull,
+ 9000000ull,
+ 80000000ull,
+ 81000000ull,
+ 800000000ull,
+ 801000000ull,
+ 880000000ull,
+ 881000000ull,
+
+ 10000000ull,
+ 11000000ull,
+ 12000000ull,
+ 13000000ull,
+ 14000000ull,
+ 15000000ull,
+ 16000000ull,
+ 17000000ull,
+ 18000000ull,
+ 19000000ull,
+ 90000000ull,
+ 91000000ull,
+ 810000000ull,
+ 811000000ull,
+ 890000000ull,
+ 891000000ull,
+
+ 20000000ull,
+ 21000000ull,
+ 22000000ull,
+ 23000000ull,
+ 24000000ull,
+ 25000000ull,
+ 26000000ull,
+ 27000000ull,
+ 28000000ull,
+ 29000000ull,
+ 82000000ull,
+ 83000000ull,
+ 820000000ull,
+ 821000000ull,
+ 808000000ull,
+ 809000000ull,
+
+ 30000000ull,
+ 31000000ull,
+ 32000000ull,
+ 33000000ull,
+ 34000000ull,
+ 35000000ull,
+ 36000000ull,
+ 37000000ull,
+ 38000000ull,
+ 39000000ull,
+ 92000000ull,
+ 93000000ull,
+ 830000000ull,
+ 831000000ull,
+ 818000000ull,
+ 819000000ull,
+
+ 40000000ull,
+ 41000000ull,
+ 42000000ull,
+ 43000000ull,
+ 44000000ull,
+ 45000000ull,
+ 46000000ull,
+ 47000000ull,
+ 48000000ull,
+ 49000000ull,
+ 84000000ull,
+ 85000000ull,
+ 840000000ull,
+ 841000000ull,
+ 88000000ull,
+ 89000000ull,
+
+ 50000000ull,
+ 51000000ull,
+ 52000000ull,
+ 53000000ull,
+ 54000000ull,
+ 55000000ull,
+ 56000000ull,
+ 57000000ull,
+ 58000000ull,
+ 59000000ull,
+ 94000000ull,
+ 95000000ull,
+ 850000000ull,
+ 851000000ull,
+ 98000000ull,
+ 99000000ull,
+
+ 60000000ull,
+ 61000000ull,
+ 62000000ull,
+ 63000000ull,
+ 64000000ull,
+ 65000000ull,
+ 66000000ull,
+ 67000000ull,
+ 68000000ull,
+ 69000000ull,
+ 86000000ull,
+ 87000000ull,
+ 860000000ull,
+ 861000000ull,
+ 888000000ull,
+ 889000000ull,
+
+ 70000000ull,
+ 71000000ull,
+ 72000000ull,
+ 73000000ull,
+ 74000000ull,
+ 75000000ull,
+ 76000000ull,
+ 77000000ull,
+ 78000000ull,
+ 79000000ull,
+ 96000000ull,
+ 97000000ull,
+ 870000000ull,
+ 871000000ull,
+ 898000000ull,
+ 899000000ull,
+
+ 100000000ull,
+ 101000000ull,
+ 102000000ull,
+ 103000000ull,
+ 104000000ull,
+ 105000000ull,
+ 106000000ull,
+ 107000000ull,
+ 108000000ull,
+ 109000000ull,
+ 180000000ull,
+ 181000000ull,
+ 900000000ull,
+ 901000000ull,
+ 980000000ull,
+ 981000000ull,
+
+ 110000000ull,
+ 111000000ull,
+ 112000000ull,
+ 113000000ull,
+ 114000000ull,
+ 115000000ull,
+ 116000000ull,
+ 117000000ull,
+ 118000000ull,
+ 119000000ull,
+ 190000000ull,
+ 191000000ull,
+ 910000000ull,
+ 911000000ull,
+ 990000000ull,
+ 991000000ull,
+
+ 120000000ull,
+ 121000000ull,
+ 122000000ull,
+ 123000000ull,
+ 124000000ull,
+ 125000000ull,
+ 126000000ull,
+ 127000000ull,
+ 128000000ull,
+ 129000000ull,
+ 182000000ull,
+ 183000000ull,
+ 920000000ull,
+ 921000000ull,
+ 908000000ull,
+ 909000000ull,
+
+ 130000000ull,
+ 131000000ull,
+ 132000000ull,
+ 133000000ull,
+ 134000000ull,
+ 135000000ull,
+ 136000000ull,
+ 137000000ull,
+ 138000000ull,
+ 139000000ull,
+ 192000000ull,
+ 193000000ull,
+ 930000000ull,
+ 931000000ull,
+ 918000000ull,
+ 919000000ull,
+
+ 140000000ull,
+ 141000000ull,
+ 142000000ull,
+ 143000000ull,
+ 144000000ull,
+ 145000000ull,
+ 146000000ull,
+ 147000000ull,
+ 148000000ull,
+ 149000000ull,
+ 184000000ull,
+ 185000000ull,
+ 940000000ull,
+ 941000000ull,
+ 188000000ull,
+ 189000000ull,
+
+ 150000000ull,
+ 151000000ull,
+ 152000000ull,
+ 153000000ull,
+ 154000000ull,
+ 155000000ull,
+ 156000000ull,
+ 157000000ull,
+ 158000000ull,
+ 159000000ull,
+ 194000000ull,
+ 195000000ull,
+ 950000000ull,
+ 951000000ull,
+ 198000000ull,
+ 199000000ull,
+
+ 160000000ull,
+ 161000000ull,
+ 162000000ull,
+ 163000000ull,
+ 164000000ull,
+ 165000000ull,
+ 166000000ull,
+ 167000000ull,
+ 168000000ull,
+ 169000000ull,
+ 186000000ull,
+ 187000000ull,
+ 960000000ull,
+ 961000000ull,
+ 988000000ull,
+ 989000000ull,
+
+ 170000000ull,
+ 171000000ull,
+ 172000000ull,
+ 173000000ull,
+ 174000000ull,
+ 175000000ull,
+ 176000000ull,
+ 177000000ull,
+ 178000000ull,
+ 179000000ull,
+ 196000000ull,
+ 197000000ull,
+ 970000000ull,
+ 971000000ull,
+ 998000000ull,
+ 999000000ull,
+
+ 200000000ull,
+ 201000000ull,
+ 202000000ull,
+ 203000000ull,
+ 204000000ull,
+ 205000000ull,
+ 206000000ull,
+ 207000000ull,
+ 208000000ull,
+ 209000000ull,
+ 280000000ull,
+ 281000000ull,
+ 802000000ull,
+ 803000000ull,
+ 882000000ull,
+ 883000000ull,
+
+ 210000000ull,
+ 211000000ull,
+ 212000000ull,
+ 213000000ull,
+ 214000000ull,
+ 215000000ull,
+ 216000000ull,
+ 217000000ull,
+ 218000000ull,
+ 219000000ull,
+ 290000000ull,
+ 291000000ull,
+ 812000000ull,
+ 813000000ull,
+ 892000000ull,
+ 893000000ull,
+
+ 220000000ull,
+ 221000000ull,
+ 222000000ull,
+ 223000000ull,
+ 224000000ull,
+ 225000000ull,
+ 226000000ull,
+ 227000000ull,
+ 228000000ull,
+ 229000000ull,
+ 282000000ull,
+ 283000000ull,
+ 822000000ull,
+ 823000000ull,
+ 828000000ull,
+ 829000000ull,
+
+ 230000000ull,
+ 231000000ull,
+ 232000000ull,
+ 233000000ull,
+ 234000000ull,
+ 235000000ull,
+ 236000000ull,
+ 237000000ull,
+ 238000000ull,
+ 239000000ull,
+ 292000000ull,
+ 293000000ull,
+ 832000000ull,
+ 833000000ull,
+ 838000000ull,
+ 839000000ull,
+
+ 240000000ull,
+ 241000000ull,
+ 242000000ull,
+ 243000000ull,
+ 244000000ull,
+ 245000000ull,
+ 246000000ull,
+ 247000000ull,
+ 248000000ull,
+ 249000000ull,
+ 284000000ull,
+ 285000000ull,
+ 842000000ull,
+ 843000000ull,
+ 288000000ull,
+ 289000000ull,
+
+ 250000000ull,
+ 251000000ull,
+ 252000000ull,
+ 253000000ull,
+ 254000000ull,
+ 255000000ull,
+ 256000000ull,
+ 257000000ull,
+ 258000000ull,
+ 259000000ull,
+ 294000000ull,
+ 295000000ull,
+ 852000000ull,
+ 853000000ull,
+ 298000000ull,
+ 299000000ull,
+
+ 260000000ull,
+ 261000000ull,
+ 262000000ull,
+ 263000000ull,
+ 264000000ull,
+ 265000000ull,
+ 266000000ull,
+ 267000000ull,
+ 268000000ull,
+ 269000000ull,
+ 286000000ull,
+ 287000000ull,
+ 862000000ull,
+ 863000000ull,
+ 888000000ull,
+ 889000000ull,
+
+ 270000000ull,
+ 271000000ull,
+ 272000000ull,
+ 273000000ull,
+ 274000000ull,
+ 275000000ull,
+ 276000000ull,
+ 277000000ull,
+ 278000000ull,
+ 279000000ull,
+ 296000000ull,
+ 297000000ull,
+ 872000000ull,
+ 873000000ull,
+ 898000000ull,
+ 899000000ull,
+
+ 300000000ull,
+ 301000000ull,
+ 302000000ull,
+ 303000000ull,
+ 304000000ull,
+ 305000000ull,
+ 306000000ull,
+ 307000000ull,
+ 308000000ull,
+ 309000000ull,
+ 380000000ull,
+ 381000000ull,
+ 902000000ull,
+ 903000000ull,
+ 982000000ull,
+ 983000000ull,
+
+ 310000000ull,
+ 311000000ull,
+ 312000000ull,
+ 313000000ull,
+ 314000000ull,
+ 315000000ull,
+ 316000000ull,
+ 317000000ull,
+ 318000000ull,
+ 319000000ull,
+ 390000000ull,
+ 391000000ull,
+ 912000000ull,
+ 913000000ull,
+ 992000000ull,
+ 993000000ull,
+
+ 320000000ull,
+ 321000000ull,
+ 322000000ull,
+ 323000000ull,
+ 324000000ull,
+ 325000000ull,
+ 326000000ull,
+ 327000000ull,
+ 328000000ull,
+ 329000000ull,
+ 382000000ull,
+ 383000000ull,
+ 922000000ull,
+ 923000000ull,
+ 928000000ull,
+ 929000000ull,
+
+ 330000000ull,
+ 331000000ull,
+ 332000000ull,
+ 333000000ull,
+ 334000000ull,
+ 335000000ull,
+ 336000000ull,
+ 337000000ull,
+ 338000000ull,
+ 339000000ull,
+ 392000000ull,
+ 393000000ull,
+ 932000000ull,
+ 933000000ull,
+ 938000000ull,
+ 939000000ull,
+
+ 340000000ull,
+ 341000000ull,
+ 342000000ull,
+ 343000000ull,
+ 344000000ull,
+ 345000000ull,
+ 346000000ull,
+ 347000000ull,
+ 348000000ull,
+ 349000000ull,
+ 384000000ull,
+ 385000000ull,
+ 942000000ull,
+ 943000000ull,
+ 388000000ull,
+ 389000000ull,
+
+ 350000000ull,
+ 351000000ull,
+ 352000000ull,
+ 353000000ull,
+ 354000000ull,
+ 355000000ull,
+ 356000000ull,
+ 357000000ull,
+ 358000000ull,
+ 359000000ull,
+ 394000000ull,
+ 395000000ull,
+ 952000000ull,
+ 953000000ull,
+ 398000000ull,
+ 399000000ull,
+
+ 360000000ull,
+ 361000000ull,
+ 362000000ull,
+ 363000000ull,
+ 364000000ull,
+ 365000000ull,
+ 366000000ull,
+ 367000000ull,
+ 368000000ull,
+ 369000000ull,
+ 386000000ull,
+ 387000000ull,
+ 962000000ull,
+ 963000000ull,
+ 988000000ull,
+ 989000000ull,
+
+ 370000000ull,
+ 371000000ull,
+ 372000000ull,
+ 373000000ull,
+ 374000000ull,
+ 375000000ull,
+ 376000000ull,
+ 377000000ull,
+ 378000000ull,
+ 379000000ull,
+ 396000000ull,
+ 397000000ull,
+ 972000000ull,
+ 973000000ull,
+ 998000000ull,
+ 999000000ull,
+
+ 400000000ull,
+ 401000000ull,
+ 402000000ull,
+ 403000000ull,
+ 404000000ull,
+ 405000000ull,
+ 406000000ull,
+ 407000000ull,
+ 408000000ull,
+ 409000000ull,
+ 480000000ull,
+ 481000000ull,
+ 804000000ull,
+ 805000000ull,
+ 884000000ull,
+ 885000000ull,
+
+ 410000000ull,
+ 411000000ull,
+ 412000000ull,
+ 413000000ull,
+ 414000000ull,
+ 415000000ull,
+ 416000000ull,
+ 417000000ull,
+ 418000000ull,
+ 419000000ull,
+ 490000000ull,
+ 491000000ull,
+ 814000000ull,
+ 815000000ull,
+ 894000000ull,
+ 895000000ull,
+
+ 420000000ull,
+ 421000000ull,
+ 422000000ull,
+ 423000000ull,
+ 424000000ull,
+ 425000000ull,
+ 426000000ull,
+ 427000000ull,
+ 428000000ull,
+ 429000000ull,
+ 482000000ull,
+ 483000000ull,
+ 824000000ull,
+ 825000000ull,
+ 848000000ull,
+ 849000000ull,
+
+ 430000000ull,
+ 431000000ull,
+ 432000000ull,
+ 433000000ull,
+ 434000000ull,
+ 435000000ull,
+ 436000000ull,
+ 437000000ull,
+ 438000000ull,
+ 439000000ull,
+ 492000000ull,
+ 493000000ull,
+ 834000000ull,
+ 835000000ull,
+ 858000000ull,
+ 859000000ull,
+
+ 440000000ull,
+ 441000000ull,
+ 442000000ull,
+ 443000000ull,
+ 444000000ull,
+ 445000000ull,
+ 446000000ull,
+ 447000000ull,
+ 448000000ull,
+ 449000000ull,
+ 484000000ull,
+ 485000000ull,
+ 844000000ull,
+ 845000000ull,
+ 488000000ull,
+ 489000000ull,
+
+ 450000000ull,
+ 451000000ull,
+ 452000000ull,
+ 453000000ull,
+ 454000000ull,
+ 455000000ull,
+ 456000000ull,
+ 457000000ull,
+ 458000000ull,
+ 459000000ull,
+ 494000000ull,
+ 495000000ull,
+ 854000000ull,
+ 855000000ull,
+ 498000000ull,
+ 499000000ull,
+
+ 460000000ull,
+ 461000000ull,
+ 462000000ull,
+ 463000000ull,
+ 464000000ull,
+ 465000000ull,
+ 466000000ull,
+ 467000000ull,
+ 468000000ull,
+ 469000000ull,
+ 486000000ull,
+ 487000000ull,
+ 864000000ull,
+ 865000000ull,
+ 888000000ull,
+ 889000000ull,
+
+ 470000000ull,
+ 471000000ull,
+ 472000000ull,
+ 473000000ull,
+ 474000000ull,
+ 475000000ull,
+ 476000000ull,
+ 477000000ull,
+ 478000000ull,
+ 479000000ull,
+ 496000000ull,
+ 497000000ull,
+ 874000000ull,
+ 875000000ull,
+ 898000000ull,
+ 899000000ull,
+
+ 500000000ull,
+ 501000000ull,
+ 502000000ull,
+ 503000000ull,
+ 504000000ull,
+ 505000000ull,
+ 506000000ull,
+ 507000000ull,
+ 508000000ull,
+ 509000000ull,
+ 580000000ull,
+ 581000000ull,
+ 904000000ull,
+ 905000000ull,
+ 984000000ull,
+ 985000000ull,
+
+ 510000000ull,
+ 511000000ull,
+ 512000000ull,
+ 513000000ull,
+ 514000000ull,
+ 515000000ull,
+ 516000000ull,
+ 517000000ull,
+ 518000000ull,
+ 519000000ull,
+ 590000000ull,
+ 591000000ull,
+ 914000000ull,
+ 915000000ull,
+ 994000000ull,
+ 995000000ull,
+
+ 520000000ull,
+ 521000000ull,
+ 522000000ull,
+ 523000000ull,
+ 524000000ull,
+ 525000000ull,
+ 526000000ull,
+ 527000000ull,
+ 528000000ull,
+ 529000000ull,
+ 582000000ull,
+ 583000000ull,
+ 924000000ull,
+ 925000000ull,
+ 948000000ull,
+ 949000000ull,
+
+ 530000000ull,
+ 531000000ull,
+ 532000000ull,
+ 533000000ull,
+ 534000000ull,
+ 535000000ull,
+ 536000000ull,
+ 537000000ull,
+ 538000000ull,
+ 539000000ull,
+ 592000000ull,
+ 593000000ull,
+ 934000000ull,
+ 935000000ull,
+ 958000000ull,
+ 959000000ull,
+
+ 540000000ull,
+ 541000000ull,
+ 542000000ull,
+ 543000000ull,
+ 544000000ull,
+ 545000000ull,
+ 546000000ull,
+ 547000000ull,
+ 548000000ull,
+ 549000000ull,
+ 584000000ull,
+ 585000000ull,
+ 944000000ull,
+ 945000000ull,
+ 588000000ull,
+ 589000000ull,
+
+ 550000000ull,
+ 551000000ull,
+ 552000000ull,
+ 553000000ull,
+ 554000000ull,
+ 555000000ull,
+ 556000000ull,
+ 557000000ull,
+ 558000000ull,
+ 559000000ull,
+ 594000000ull,
+ 595000000ull,
+ 954000000ull,
+ 955000000ull,
+ 598000000ull,
+ 599000000ull,
+
+ 560000000ull,
+ 561000000ull,
+ 562000000ull,
+ 563000000ull,
+ 564000000ull,
+ 565000000ull,
+ 566000000ull,
+ 567000000ull,
+ 568000000ull,
+ 569000000ull,
+ 586000000ull,
+ 587000000ull,
+ 964000000ull,
+ 965000000ull,
+ 988000000ull,
+ 989000000ull,
+
+ 570000000ull,
+ 571000000ull,
+ 572000000ull,
+ 573000000ull,
+ 574000000ull,
+ 575000000ull,
+ 576000000ull,
+ 577000000ull,
+ 578000000ull,
+ 579000000ull,
+ 596000000ull,
+ 597000000ull,
+ 974000000ull,
+ 975000000ull,
+ 998000000ull,
+ 999000000ull,
+
+ 600000000ull,
+ 601000000ull,
+ 602000000ull,
+ 603000000ull,
+ 604000000ull,
+ 605000000ull,
+ 606000000ull,
+ 607000000ull,
+ 608000000ull,
+ 609000000ull,
+ 680000000ull,
+ 681000000ull,
+ 806000000ull,
+ 807000000ull,
+ 886000000ull,
+ 887000000ull,
+
+ 610000000ull,
+ 611000000ull,
+ 612000000ull,
+ 613000000ull,
+ 614000000ull,
+ 615000000ull,
+ 616000000ull,
+ 617000000ull,
+ 618000000ull,
+ 619000000ull,
+ 690000000ull,
+ 691000000ull,
+ 816000000ull,
+ 817000000ull,
+ 896000000ull,
+ 897000000ull,
+
+ 620000000ull,
+ 621000000ull,
+ 622000000ull,
+ 623000000ull,
+ 624000000ull,
+ 625000000ull,
+ 626000000ull,
+ 627000000ull,
+ 628000000ull,
+ 629000000ull,
+ 682000000ull,
+ 683000000ull,
+ 826000000ull,
+ 827000000ull,
+ 868000000ull,
+ 869000000ull,
+
+ 630000000ull,
+ 631000000ull,
+ 632000000ull,
+ 633000000ull,
+ 634000000ull,
+ 635000000ull,
+ 636000000ull,
+ 637000000ull,
+ 638000000ull,
+ 639000000ull,
+ 692000000ull,
+ 693000000ull,
+ 836000000ull,
+ 837000000ull,
+ 878000000ull,
+ 879000000ull,
+
+ 640000000ull,
+ 641000000ull,
+ 642000000ull,
+ 643000000ull,
+ 644000000ull,
+ 645000000ull,
+ 646000000ull,
+ 647000000ull,
+ 648000000ull,
+ 649000000ull,
+ 684000000ull,
+ 685000000ull,
+ 846000000ull,
+ 847000000ull,
+ 688000000ull,
+ 689000000ull,
+
+ 650000000ull,
+ 651000000ull,
+ 652000000ull,
+ 653000000ull,
+ 654000000ull,
+ 655000000ull,
+ 656000000ull,
+ 657000000ull,
+ 658000000ull,
+ 659000000ull,
+ 694000000ull,
+ 695000000ull,
+ 856000000ull,
+ 857000000ull,
+ 698000000ull,
+ 699000000ull,
+
+ 660000000ull,
+ 661000000ull,
+ 662000000ull,
+ 663000000ull,
+ 664000000ull,
+ 665000000ull,
+ 666000000ull,
+ 667000000ull,
+ 668000000ull,
+ 669000000ull,
+ 686000000ull,
+ 687000000ull,
+ 866000000ull,
+ 867000000ull,
+ 888000000ull,
+ 889000000ull,
+
+ 670000000ull,
+ 671000000ull,
+ 672000000ull,
+ 673000000ull,
+ 674000000ull,
+ 675000000ull,
+ 676000000ull,
+ 677000000ull,
+ 678000000ull,
+ 679000000ull,
+ 696000000ull,
+ 697000000ull,
+ 876000000ull,
+ 877000000ull,
+ 898000000ull,
+ 899000000ull,
+
+ 700000000ull,
+ 701000000ull,
+ 702000000ull,
+ 703000000ull,
+ 704000000ull,
+ 705000000ull,
+ 706000000ull,
+ 707000000ull,
+ 708000000ull,
+ 709000000ull,
+ 780000000ull,
+ 781000000ull,
+ 906000000ull,
+ 907000000ull,
+ 986000000ull,
+ 987000000ull,
+
+ 710000000ull,
+ 711000000ull,
+ 712000000ull,
+ 713000000ull,
+ 714000000ull,
+ 715000000ull,
+ 716000000ull,
+ 717000000ull,
+ 718000000ull,
+ 719000000ull,
+ 790000000ull,
+ 791000000ull,
+ 916000000ull,
+ 917000000ull,
+ 996000000ull,
+ 997000000ull,
+
+ 720000000ull,
+ 721000000ull,
+ 722000000ull,
+ 723000000ull,
+ 724000000ull,
+ 725000000ull,
+ 726000000ull,
+ 727000000ull,
+ 728000000ull,
+ 729000000ull,
+ 782000000ull,
+ 783000000ull,
+ 926000000ull,
+ 927000000ull,
+ 968000000ull,
+ 969000000ull,
+
+ 730000000ull,
+ 731000000ull,
+ 732000000ull,
+ 733000000ull,
+ 734000000ull,
+ 735000000ull,
+ 736000000ull,
+ 737000000ull,
+ 738000000ull,
+ 739000000ull,
+ 792000000ull,
+ 793000000ull,
+ 936000000ull,
+ 937000000ull,
+ 978000000ull,
+ 979000000ull,
+
+ 740000000ull,
+ 741000000ull,
+ 742000000ull,
+ 743000000ull,
+ 744000000ull,
+ 745000000ull,
+ 746000000ull,
+ 747000000ull,
+ 748000000ull,
+ 749000000ull,
+ 784000000ull,
+ 785000000ull,
+ 946000000ull,
+ 947000000ull,
+ 788000000ull,
+ 789000000ull,
+
+ 750000000ull,
+ 751000000ull,
+ 752000000ull,
+ 753000000ull,
+ 754000000ull,
+ 755000000ull,
+ 756000000ull,
+ 757000000ull,
+ 758000000ull,
+ 759000000ull,
+ 794000000ull,
+ 795000000ull,
+ 956000000ull,
+ 957000000ull,
+ 798000000ull,
+ 799000000ull,
+
+ 760000000ull,
+ 761000000ull,
+ 762000000ull,
+ 763000000ull,
+ 764000000ull,
+ 765000000ull,
+ 766000000ull,
+ 767000000ull,
+ 768000000ull,
+ 769000000ull,
+ 786000000ull,
+ 787000000ull,
+ 966000000ull,
+ 967000000ull,
+ 988000000ull,
+ 989000000ull,
+
+ 770000000ull,
+ 771000000ull,
+ 772000000ull,
+ 773000000ull,
+ 774000000ull,
+ 775000000ull,
+ 776000000ull,
+ 777000000ull,
+ 778000000ull,
+ 779000000ull,
+ 796000000ull,
+ 797000000ull,
+ 976000000ull,
+ 977000000ull,
+ 998000000ull,
+ 999000000ull };
+
+static const UINT64 d2b4[] = {
+ 0000000000ull,
+ 1000000000ull,
+ 2000000000ull,
+ 3000000000ull,
+ 4000000000ull,
+ 5000000000ull,
+ 6000000000ull,
+ 7000000000ull,
+ 8000000000ull,
+ 9000000000ull,
+ 80000000000ull,
+ 81000000000ull,
+ 800000000000ull,
+ 801000000000ull,
+ 880000000000ull,
+ 881000000000ull,
+
+ 10000000000ull,
+ 11000000000ull,
+ 12000000000ull,
+ 13000000000ull,
+ 14000000000ull,
+ 15000000000ull,
+ 16000000000ull,
+ 17000000000ull,
+ 18000000000ull,
+ 19000000000ull,
+ 90000000000ull,
+ 91000000000ull,
+ 810000000000ull,
+ 811000000000ull,
+ 890000000000ull,
+ 891000000000ull,
+
+ 20000000000ull,
+ 21000000000ull,
+ 22000000000ull,
+ 23000000000ull,
+ 24000000000ull,
+ 25000000000ull,
+ 26000000000ull,
+ 27000000000ull,
+ 28000000000ull,
+ 29000000000ull,
+ 82000000000ull,
+ 83000000000ull,
+ 820000000000ull,
+ 821000000000ull,
+ 808000000000ull,
+ 809000000000ull,
+
+ 30000000000ull,
+ 31000000000ull,
+ 32000000000ull,
+ 33000000000ull,
+ 34000000000ull,
+ 35000000000ull,
+ 36000000000ull,
+ 37000000000ull,
+ 38000000000ull,
+ 39000000000ull,
+ 92000000000ull,
+ 93000000000ull,
+ 830000000000ull,
+ 831000000000ull,
+ 818000000000ull,
+ 819000000000ull,
+
+ 40000000000ull,
+ 41000000000ull,
+ 42000000000ull,
+ 43000000000ull,
+ 44000000000ull,
+ 45000000000ull,
+ 46000000000ull,
+ 47000000000ull,
+ 48000000000ull,
+ 49000000000ull,
+ 84000000000ull,
+ 85000000000ull,
+ 840000000000ull,
+ 841000000000ull,
+ 88000000000ull,
+ 89000000000ull,
+
+ 50000000000ull,
+ 51000000000ull,
+ 52000000000ull,
+ 53000000000ull,
+ 54000000000ull,
+ 55000000000ull,
+ 56000000000ull,
+ 57000000000ull,
+ 58000000000ull,
+ 59000000000ull,
+ 94000000000ull,
+ 95000000000ull,
+ 850000000000ull,
+ 851000000000ull,
+ 98000000000ull,
+ 99000000000ull,
+
+ 60000000000ull,
+ 61000000000ull,
+ 62000000000ull,
+ 63000000000ull,
+ 64000000000ull,
+ 65000000000ull,
+ 66000000000ull,
+ 67000000000ull,
+ 68000000000ull,
+ 69000000000ull,
+ 86000000000ull,
+ 87000000000ull,
+ 860000000000ull,
+ 861000000000ull,
+ 888000000000ull,
+ 889000000000ull,
+
+ 70000000000ull,
+ 71000000000ull,
+ 72000000000ull,
+ 73000000000ull,
+ 74000000000ull,
+ 75000000000ull,
+ 76000000000ull,
+ 77000000000ull,
+ 78000000000ull,
+ 79000000000ull,
+ 96000000000ull,
+ 97000000000ull,
+ 870000000000ull,
+ 871000000000ull,
+ 898000000000ull,
+ 899000000000ull,
+
+ 100000000000ull,
+ 101000000000ull,
+ 102000000000ull,
+ 103000000000ull,
+ 104000000000ull,
+ 105000000000ull,
+ 106000000000ull,
+ 107000000000ull,
+ 108000000000ull,
+ 109000000000ull,
+ 180000000000ull,
+ 181000000000ull,
+ 900000000000ull,
+ 901000000000ull,
+ 980000000000ull,
+ 981000000000ull,
+
+ 110000000000ull,
+ 111000000000ull,
+ 112000000000ull,
+ 113000000000ull,
+ 114000000000ull,
+ 115000000000ull,
+ 116000000000ull,
+ 117000000000ull,
+ 118000000000ull,
+ 119000000000ull,
+ 190000000000ull,
+ 191000000000ull,
+ 910000000000ull,
+ 911000000000ull,
+ 990000000000ull,
+ 991000000000ull,
+
+ 120000000000ull,
+ 121000000000ull,
+ 122000000000ull,
+ 123000000000ull,
+ 124000000000ull,
+ 125000000000ull,
+ 126000000000ull,
+ 127000000000ull,
+ 128000000000ull,
+ 129000000000ull,
+ 182000000000ull,
+ 183000000000ull,
+ 920000000000ull,
+ 921000000000ull,
+ 908000000000ull,
+ 909000000000ull,
+
+ 130000000000ull,
+ 131000000000ull,
+ 132000000000ull,
+ 133000000000ull,
+ 134000000000ull,
+ 135000000000ull,
+ 136000000000ull,
+ 137000000000ull,
+ 138000000000ull,
+ 139000000000ull,
+ 192000000000ull,
+ 193000000000ull,
+ 930000000000ull,
+ 931000000000ull,
+ 918000000000ull,
+ 919000000000ull,
+
+ 140000000000ull,
+ 141000000000ull,
+ 142000000000ull,
+ 143000000000ull,
+ 144000000000ull,
+ 145000000000ull,
+ 146000000000ull,
+ 147000000000ull,
+ 148000000000ull,
+ 149000000000ull,
+ 184000000000ull,
+ 185000000000ull,
+ 940000000000ull,
+ 941000000000ull,
+ 188000000000ull,
+ 189000000000ull,
+
+ 150000000000ull,
+ 151000000000ull,
+ 152000000000ull,
+ 153000000000ull,
+ 154000000000ull,
+ 155000000000ull,
+ 156000000000ull,
+ 157000000000ull,
+ 158000000000ull,
+ 159000000000ull,
+ 194000000000ull,
+ 195000000000ull,
+ 950000000000ull,
+ 951000000000ull,
+ 198000000000ull,
+ 199000000000ull,
+
+ 160000000000ull,
+ 161000000000ull,
+ 162000000000ull,
+ 163000000000ull,
+ 164000000000ull,
+ 165000000000ull,
+ 166000000000ull,
+ 167000000000ull,
+ 168000000000ull,
+ 169000000000ull,
+ 186000000000ull,
+ 187000000000ull,
+ 960000000000ull,
+ 961000000000ull,
+ 988000000000ull,
+ 989000000000ull,
+
+ 170000000000ull,
+ 171000000000ull,
+ 172000000000ull,
+ 173000000000ull,
+ 174000000000ull,
+ 175000000000ull,
+ 176000000000ull,
+ 177000000000ull,
+ 178000000000ull,
+ 179000000000ull,
+ 196000000000ull,
+ 197000000000ull,
+ 970000000000ull,
+ 971000000000ull,
+ 998000000000ull,
+ 999000000000ull,
+
+ 200000000000ull,
+ 201000000000ull,
+ 202000000000ull,
+ 203000000000ull,
+ 204000000000ull,
+ 205000000000ull,
+ 206000000000ull,
+ 207000000000ull,
+ 208000000000ull,
+ 209000000000ull,
+ 280000000000ull,
+ 281000000000ull,
+ 802000000000ull,
+ 803000000000ull,
+ 882000000000ull,
+ 883000000000ull,
+
+ 210000000000ull,
+ 211000000000ull,
+ 212000000000ull,
+ 213000000000ull,
+ 214000000000ull,
+ 215000000000ull,
+ 216000000000ull,
+ 217000000000ull,
+ 218000000000ull,
+ 219000000000ull,
+ 290000000000ull,
+ 291000000000ull,
+ 812000000000ull,
+ 813000000000ull,
+ 892000000000ull,
+ 893000000000ull,
+
+ 220000000000ull,
+ 221000000000ull,
+ 222000000000ull,
+ 223000000000ull,
+ 224000000000ull,
+ 225000000000ull,
+ 226000000000ull,
+ 227000000000ull,
+ 228000000000ull,
+ 229000000000ull,
+ 282000000000ull,
+ 283000000000ull,
+ 822000000000ull,
+ 823000000000ull,
+ 828000000000ull,
+ 829000000000ull,
+
+ 230000000000ull,
+ 231000000000ull,
+ 232000000000ull,
+ 233000000000ull,
+ 234000000000ull,
+ 235000000000ull,
+ 236000000000ull,
+ 237000000000ull,
+ 238000000000ull,
+ 239000000000ull,
+ 292000000000ull,
+ 293000000000ull,
+ 832000000000ull,
+ 833000000000ull,
+ 838000000000ull,
+ 839000000000ull,
+
+ 240000000000ull,
+ 241000000000ull,
+ 242000000000ull,
+ 243000000000ull,
+ 244000000000ull,
+ 245000000000ull,
+ 246000000000ull,
+ 247000000000ull,
+ 248000000000ull,
+ 249000000000ull,
+ 284000000000ull,
+ 285000000000ull,
+ 842000000000ull,
+ 843000000000ull,
+ 288000000000ull,
+ 289000000000ull,
+
+ 250000000000ull,
+ 251000000000ull,
+ 252000000000ull,
+ 253000000000ull,
+ 254000000000ull,
+ 255000000000ull,
+ 256000000000ull,
+ 257000000000ull,
+ 258000000000ull,
+ 259000000000ull,
+ 294000000000ull,
+ 295000000000ull,
+ 852000000000ull,
+ 853000000000ull,
+ 298000000000ull,
+ 299000000000ull,
+
+ 260000000000ull,
+ 261000000000ull,
+ 262000000000ull,
+ 263000000000ull,
+ 264000000000ull,
+ 265000000000ull,
+ 266000000000ull,
+ 267000000000ull,
+ 268000000000ull,
+ 269000000000ull,
+ 286000000000ull,
+ 287000000000ull,
+ 862000000000ull,
+ 863000000000ull,
+ 888000000000ull,
+ 889000000000ull,
+
+ 270000000000ull,
+ 271000000000ull,
+ 272000000000ull,
+ 273000000000ull,
+ 274000000000ull,
+ 275000000000ull,
+ 276000000000ull,
+ 277000000000ull,
+ 278000000000ull,
+ 279000000000ull,
+ 296000000000ull,
+ 297000000000ull,
+ 872000000000ull,
+ 873000000000ull,
+ 898000000000ull,
+ 899000000000ull,
+
+ 300000000000ull,
+ 301000000000ull,
+ 302000000000ull,
+ 303000000000ull,
+ 304000000000ull,
+ 305000000000ull,
+ 306000000000ull,
+ 307000000000ull,
+ 308000000000ull,
+ 309000000000ull,
+ 380000000000ull,
+ 381000000000ull,
+ 902000000000ull,
+ 903000000000ull,
+ 982000000000ull,
+ 983000000000ull,
+
+ 310000000000ull,
+ 311000000000ull,
+ 312000000000ull,
+ 313000000000ull,
+ 314000000000ull,
+ 315000000000ull,
+ 316000000000ull,
+ 317000000000ull,
+ 318000000000ull,
+ 319000000000ull,
+ 390000000000ull,
+ 391000000000ull,
+ 912000000000ull,
+ 913000000000ull,
+ 992000000000ull,
+ 993000000000ull,
+
+ 320000000000ull,
+ 321000000000ull,
+ 322000000000ull,
+ 323000000000ull,
+ 324000000000ull,
+ 325000000000ull,
+ 326000000000ull,
+ 327000000000ull,
+ 328000000000ull,
+ 329000000000ull,
+ 382000000000ull,
+ 383000000000ull,
+ 922000000000ull,
+ 923000000000ull,
+ 928000000000ull,
+ 929000000000ull,
+
+ 330000000000ull,
+ 331000000000ull,
+ 332000000000ull,
+ 333000000000ull,
+ 334000000000ull,
+ 335000000000ull,
+ 336000000000ull,
+ 337000000000ull,
+ 338000000000ull,
+ 339000000000ull,
+ 392000000000ull,
+ 393000000000ull,
+ 932000000000ull,
+ 933000000000ull,
+ 938000000000ull,
+ 939000000000ull,
+
+ 340000000000ull,
+ 341000000000ull,
+ 342000000000ull,
+ 343000000000ull,
+ 344000000000ull,
+ 345000000000ull,
+ 346000000000ull,
+ 347000000000ull,
+ 348000000000ull,
+ 349000000000ull,
+ 384000000000ull,
+ 385000000000ull,
+ 942000000000ull,
+ 943000000000ull,
+ 388000000000ull,
+ 389000000000ull,
+
+ 350000000000ull,
+ 351000000000ull,
+ 352000000000ull,
+ 353000000000ull,
+ 354000000000ull,
+ 355000000000ull,
+ 356000000000ull,
+ 357000000000ull,
+ 358000000000ull,
+ 359000000000ull,
+ 394000000000ull,
+ 395000000000ull,
+ 952000000000ull,
+ 953000000000ull,
+ 398000000000ull,
+ 399000000000ull,
+
+ 360000000000ull,
+ 361000000000ull,
+ 362000000000ull,
+ 363000000000ull,
+ 364000000000ull,
+ 365000000000ull,
+ 366000000000ull,
+ 367000000000ull,
+ 368000000000ull,
+ 369000000000ull,
+ 386000000000ull,
+ 387000000000ull,
+ 962000000000ull,
+ 963000000000ull,
+ 988000000000ull,
+ 989000000000ull,
+
+ 370000000000ull,
+ 371000000000ull,
+ 372000000000ull,
+ 373000000000ull,
+ 374000000000ull,
+ 375000000000ull,
+ 376000000000ull,
+ 377000000000ull,
+ 378000000000ull,
+ 379000000000ull,
+ 396000000000ull,
+ 397000000000ull,
+ 972000000000ull,
+ 973000000000ull,
+ 998000000000ull,
+ 999000000000ull,
+
+ 400000000000ull,
+ 401000000000ull,
+ 402000000000ull,
+ 403000000000ull,
+ 404000000000ull,
+ 405000000000ull,
+ 406000000000ull,
+ 407000000000ull,
+ 408000000000ull,
+ 409000000000ull,
+ 480000000000ull,
+ 481000000000ull,
+ 804000000000ull,
+ 805000000000ull,
+ 884000000000ull,
+ 885000000000ull,
+
+ 410000000000ull,
+ 411000000000ull,
+ 412000000000ull,
+ 413000000000ull,
+ 414000000000ull,
+ 415000000000ull,
+ 416000000000ull,
+ 417000000000ull,
+ 418000000000ull,
+ 419000000000ull,
+ 490000000000ull,
+ 491000000000ull,
+ 814000000000ull,
+ 815000000000ull,
+ 894000000000ull,
+ 895000000000ull,
+
+ 420000000000ull,
+ 421000000000ull,
+ 422000000000ull,
+ 423000000000ull,
+ 424000000000ull,
+ 425000000000ull,
+ 426000000000ull,
+ 427000000000ull,
+ 428000000000ull,
+ 429000000000ull,
+ 482000000000ull,
+ 483000000000ull,
+ 824000000000ull,
+ 825000000000ull,
+ 848000000000ull,
+ 849000000000ull,
+
+ 430000000000ull,
+ 431000000000ull,
+ 432000000000ull,
+ 433000000000ull,
+ 434000000000ull,
+ 435000000000ull,
+ 436000000000ull,
+ 437000000000ull,
+ 438000000000ull,
+ 439000000000ull,
+ 492000000000ull,
+ 493000000000ull,
+ 834000000000ull,
+ 835000000000ull,
+ 858000000000ull,
+ 859000000000ull,
+
+ 440000000000ull,
+ 441000000000ull,
+ 442000000000ull,
+ 443000000000ull,
+ 444000000000ull,
+ 445000000000ull,
+ 446000000000ull,
+ 447000000000ull,
+ 448000000000ull,
+ 449000000000ull,
+ 484000000000ull,
+ 485000000000ull,
+ 844000000000ull,
+ 845000000000ull,
+ 488000000000ull,
+ 489000000000ull,
+
+ 450000000000ull,
+ 451000000000ull,
+ 452000000000ull,
+ 453000000000ull,
+ 454000000000ull,
+ 455000000000ull,
+ 456000000000ull,
+ 457000000000ull,
+ 458000000000ull,
+ 459000000000ull,
+ 494000000000ull,
+ 495000000000ull,
+ 854000000000ull,
+ 855000000000ull,
+ 498000000000ull,
+ 499000000000ull,
+
+ 460000000000ull,
+ 461000000000ull,
+ 462000000000ull,
+ 463000000000ull,
+ 464000000000ull,
+ 465000000000ull,
+ 466000000000ull,
+ 467000000000ull,
+ 468000000000ull,
+ 469000000000ull,
+ 486000000000ull,
+ 487000000000ull,
+ 864000000000ull,
+ 865000000000ull,
+ 888000000000ull,
+ 889000000000ull,
+
+ 470000000000ull,
+ 471000000000ull,
+ 472000000000ull,
+ 473000000000ull,
+ 474000000000ull,
+ 475000000000ull,
+ 476000000000ull,
+ 477000000000ull,
+ 478000000000ull,
+ 479000000000ull,
+ 496000000000ull,
+ 497000000000ull,
+ 874000000000ull,
+ 875000000000ull,
+ 898000000000ull,
+ 899000000000ull,
+
+ 500000000000ull,
+ 501000000000ull,
+ 502000000000ull,
+ 503000000000ull,
+ 504000000000ull,
+ 505000000000ull,
+ 506000000000ull,
+ 507000000000ull,
+ 508000000000ull,
+ 509000000000ull,
+ 580000000000ull,
+ 581000000000ull,
+ 904000000000ull,
+ 905000000000ull,
+ 984000000000ull,
+ 985000000000ull,
+
+ 510000000000ull,
+ 511000000000ull,
+ 512000000000ull,
+ 513000000000ull,
+ 514000000000ull,
+ 515000000000ull,
+ 516000000000ull,
+ 517000000000ull,
+ 518000000000ull,
+ 519000000000ull,
+ 590000000000ull,
+ 591000000000ull,
+ 914000000000ull,
+ 915000000000ull,
+ 994000000000ull,
+ 995000000000ull,
+
+ 520000000000ull,
+ 521000000000ull,
+ 522000000000ull,
+ 523000000000ull,
+ 524000000000ull,
+ 525000000000ull,
+ 526000000000ull,
+ 527000000000ull,
+ 528000000000ull,
+ 529000000000ull,
+ 582000000000ull,
+ 583000000000ull,
+ 924000000000ull,
+ 925000000000ull,
+ 948000000000ull,
+ 949000000000ull,
+
+ 530000000000ull,
+ 531000000000ull,
+ 532000000000ull,
+ 533000000000ull,
+ 534000000000ull,
+ 535000000000ull,
+ 536000000000ull,
+ 537000000000ull,
+ 538000000000ull,
+ 539000000000ull,
+ 592000000000ull,
+ 593000000000ull,
+ 934000000000ull,
+ 935000000000ull,
+ 958000000000ull,
+ 959000000000ull,
+
+ 540000000000ull,
+ 541000000000ull,
+ 542000000000ull,
+ 543000000000ull,
+ 544000000000ull,
+ 545000000000ull,
+ 546000000000ull,
+ 547000000000ull,
+ 548000000000ull,
+ 549000000000ull,
+ 584000000000ull,
+ 585000000000ull,
+ 944000000000ull,
+ 945000000000ull,
+ 588000000000ull,
+ 589000000000ull,
+
+ 550000000000ull,
+ 551000000000ull,
+ 552000000000ull,
+ 553000000000ull,
+ 554000000000ull,
+ 555000000000ull,
+ 556000000000ull,
+ 557000000000ull,
+ 558000000000ull,
+ 559000000000ull,
+ 594000000000ull,
+ 595000000000ull,
+ 954000000000ull,
+ 955000000000ull,
+ 598000000000ull,
+ 599000000000ull,
+
+ 560000000000ull,
+ 561000000000ull,
+ 562000000000ull,
+ 563000000000ull,
+ 564000000000ull,
+ 565000000000ull,
+ 566000000000ull,
+ 567000000000ull,
+ 568000000000ull,
+ 569000000000ull,
+ 586000000000ull,
+ 587000000000ull,
+ 964000000000ull,
+ 965000000000ull,
+ 988000000000ull,
+ 989000000000ull,
+
+ 570000000000ull,
+ 571000000000ull,
+ 572000000000ull,
+ 573000000000ull,
+ 574000000000ull,
+ 575000000000ull,
+ 576000000000ull,
+ 577000000000ull,
+ 578000000000ull,
+ 579000000000ull,
+ 596000000000ull,
+ 597000000000ull,
+ 974000000000ull,
+ 975000000000ull,
+ 998000000000ull,
+ 999000000000ull,
+
+ 600000000000ull,
+ 601000000000ull,
+ 602000000000ull,
+ 603000000000ull,
+ 604000000000ull,
+ 605000000000ull,
+ 606000000000ull,
+ 607000000000ull,
+ 608000000000ull,
+ 609000000000ull,
+ 680000000000ull,
+ 681000000000ull,
+ 806000000000ull,
+ 807000000000ull,
+ 886000000000ull,
+ 887000000000ull,
+
+ 610000000000ull,
+ 611000000000ull,
+ 612000000000ull,
+ 613000000000ull,
+ 614000000000ull,
+ 615000000000ull,
+ 616000000000ull,
+ 617000000000ull,
+ 618000000000ull,
+ 619000000000ull,
+ 690000000000ull,
+ 691000000000ull,
+ 816000000000ull,
+ 817000000000ull,
+ 896000000000ull,
+ 897000000000ull,
+
+ 620000000000ull,
+ 621000000000ull,
+ 622000000000ull,
+ 623000000000ull,
+ 624000000000ull,
+ 625000000000ull,
+ 626000000000ull,
+ 627000000000ull,
+ 628000000000ull,
+ 629000000000ull,
+ 682000000000ull,
+ 683000000000ull,
+ 826000000000ull,
+ 827000000000ull,
+ 868000000000ull,
+ 869000000000ull,
+
+ 630000000000ull,
+ 631000000000ull,
+ 632000000000ull,
+ 633000000000ull,
+ 634000000000ull,
+ 635000000000ull,
+ 636000000000ull,
+ 637000000000ull,
+ 638000000000ull,
+ 639000000000ull,
+ 692000000000ull,
+ 693000000000ull,
+ 836000000000ull,
+ 837000000000ull,
+ 878000000000ull,
+ 879000000000ull,
+
+ 640000000000ull,
+ 641000000000ull,
+ 642000000000ull,
+ 643000000000ull,
+ 644000000000ull,
+ 645000000000ull,
+ 646000000000ull,
+ 647000000000ull,
+ 648000000000ull,
+ 649000000000ull,
+ 684000000000ull,
+ 685000000000ull,
+ 846000000000ull,
+ 847000000000ull,
+ 688000000000ull,
+ 689000000000ull,
+
+ 650000000000ull,
+ 651000000000ull,
+ 652000000000ull,
+ 653000000000ull,
+ 654000000000ull,
+ 655000000000ull,
+ 656000000000ull,
+ 657000000000ull,
+ 658000000000ull,
+ 659000000000ull,
+ 694000000000ull,
+ 695000000000ull,
+ 856000000000ull,
+ 857000000000ull,
+ 698000000000ull,
+ 699000000000ull,
+
+ 660000000000ull,
+ 661000000000ull,
+ 662000000000ull,
+ 663000000000ull,
+ 664000000000ull,
+ 665000000000ull,
+ 666000000000ull,
+ 667000000000ull,
+ 668000000000ull,
+ 669000000000ull,
+ 686000000000ull,
+ 687000000000ull,
+ 866000000000ull,
+ 867000000000ull,
+ 888000000000ull,
+ 889000000000ull,
+
+ 670000000000ull,
+ 671000000000ull,
+ 672000000000ull,
+ 673000000000ull,
+ 674000000000ull,
+ 675000000000ull,
+ 676000000000ull,
+ 677000000000ull,
+ 678000000000ull,
+ 679000000000ull,
+ 696000000000ull,
+ 697000000000ull,
+ 876000000000ull,
+ 877000000000ull,
+ 898000000000ull,
+ 899000000000ull,
+
+ 700000000000ull,
+ 701000000000ull,
+ 702000000000ull,
+ 703000000000ull,
+ 704000000000ull,
+ 705000000000ull,
+ 706000000000ull,
+ 707000000000ull,
+ 708000000000ull,
+ 709000000000ull,
+ 780000000000ull,
+ 781000000000ull,
+ 906000000000ull,
+ 907000000000ull,
+ 986000000000ull,
+ 987000000000ull,
+
+ 710000000000ull,
+ 711000000000ull,
+ 712000000000ull,
+ 713000000000ull,
+ 714000000000ull,
+ 715000000000ull,
+ 716000000000ull,
+ 717000000000ull,
+ 718000000000ull,
+ 719000000000ull,
+ 790000000000ull,
+ 791000000000ull,
+ 916000000000ull,
+ 917000000000ull,
+ 996000000000ull,
+ 997000000000ull,
+
+ 720000000000ull,
+ 721000000000ull,
+ 722000000000ull,
+ 723000000000ull,
+ 724000000000ull,
+ 725000000000ull,
+ 726000000000ull,
+ 727000000000ull,
+ 728000000000ull,
+ 729000000000ull,
+ 782000000000ull,
+ 783000000000ull,
+ 926000000000ull,
+ 927000000000ull,
+ 968000000000ull,
+ 969000000000ull,
+
+ 730000000000ull,
+ 731000000000ull,
+ 732000000000ull,
+ 733000000000ull,
+ 734000000000ull,
+ 735000000000ull,
+ 736000000000ull,
+ 737000000000ull,
+ 738000000000ull,
+ 739000000000ull,
+ 792000000000ull,
+ 793000000000ull,
+ 936000000000ull,
+ 937000000000ull,
+ 978000000000ull,
+ 979000000000ull,
+
+ 740000000000ull,
+ 741000000000ull,
+ 742000000000ull,
+ 743000000000ull,
+ 744000000000ull,
+ 745000000000ull,
+ 746000000000ull,
+ 747000000000ull,
+ 748000000000ull,
+ 749000000000ull,
+ 784000000000ull,
+ 785000000000ull,
+ 946000000000ull,
+ 947000000000ull,
+ 788000000000ull,
+ 789000000000ull,
+
+ 750000000000ull,
+ 751000000000ull,
+ 752000000000ull,
+ 753000000000ull,
+ 754000000000ull,
+ 755000000000ull,
+ 756000000000ull,
+ 757000000000ull,
+ 758000000000ull,
+ 759000000000ull,
+ 794000000000ull,
+ 795000000000ull,
+ 956000000000ull,
+ 957000000000ull,
+ 798000000000ull,
+ 799000000000ull,
+
+ 760000000000ull,
+ 761000000000ull,
+ 762000000000ull,
+ 763000000000ull,
+ 764000000000ull,
+ 765000000000ull,
+ 766000000000ull,
+ 767000000000ull,
+ 768000000000ull,
+ 769000000000ull,
+ 786000000000ull,
+ 787000000000ull,
+ 966000000000ull,
+ 967000000000ull,
+ 988000000000ull,
+ 989000000000ull,
+
+ 770000000000ull,
+ 771000000000ull,
+ 772000000000ull,
+ 773000000000ull,
+ 774000000000ull,
+ 775000000000ull,
+ 776000000000ull,
+ 777000000000ull,
+ 778000000000ull,
+ 779000000000ull,
+ 796000000000ull,
+ 797000000000ull,
+ 976000000000ull,
+ 977000000000ull,
+ 998000000000ull,
+ 999000000000ull
+};
+
+static const UINT64 d2b5[] = {
+ 0000000000000ull,
+ 1000000000000ull,
+ 2000000000000ull,
+ 3000000000000ull,
+ 4000000000000ull,
+ 5000000000000ull,
+ 6000000000000ull,
+ 7000000000000ull,
+ 8000000000000ull,
+ 9000000000000ull,
+ 80000000000000ull,
+ 81000000000000ull,
+ 800000000000000ull,
+ 801000000000000ull,
+ 880000000000000ull,
+ 881000000000000ull,
+
+ 10000000000000ull,
+ 11000000000000ull,
+ 12000000000000ull,
+ 13000000000000ull,
+ 14000000000000ull,
+ 15000000000000ull,
+ 16000000000000ull,
+ 17000000000000ull,
+ 18000000000000ull,
+ 19000000000000ull,
+ 90000000000000ull,
+ 91000000000000ull,
+ 810000000000000ull,
+ 811000000000000ull,
+ 890000000000000ull,
+ 891000000000000ull,
+
+ 20000000000000ull,
+ 21000000000000ull,
+ 22000000000000ull,
+ 23000000000000ull,
+ 24000000000000ull,
+ 25000000000000ull,
+ 26000000000000ull,
+ 27000000000000ull,
+ 28000000000000ull,
+ 29000000000000ull,
+ 82000000000000ull,
+ 83000000000000ull,
+ 820000000000000ull,
+ 821000000000000ull,
+ 808000000000000ull,
+ 809000000000000ull,
+
+ 30000000000000ull,
+ 31000000000000ull,
+ 32000000000000ull,
+ 33000000000000ull,
+ 34000000000000ull,
+ 35000000000000ull,
+ 36000000000000ull,
+ 37000000000000ull,
+ 38000000000000ull,
+ 39000000000000ull,
+ 92000000000000ull,
+ 93000000000000ull,
+ 830000000000000ull,
+ 831000000000000ull,
+ 818000000000000ull,
+ 819000000000000ull,
+
+ 40000000000000ull,
+ 41000000000000ull,
+ 42000000000000ull,
+ 43000000000000ull,
+ 44000000000000ull,
+ 45000000000000ull,
+ 46000000000000ull,
+ 47000000000000ull,
+ 48000000000000ull,
+ 49000000000000ull,
+ 84000000000000ull,
+ 85000000000000ull,
+ 840000000000000ull,
+ 841000000000000ull,
+ 88000000000000ull,
+ 89000000000000ull,
+
+ 50000000000000ull,
+ 51000000000000ull,
+ 52000000000000ull,
+ 53000000000000ull,
+ 54000000000000ull,
+ 55000000000000ull,
+ 56000000000000ull,
+ 57000000000000ull,
+ 58000000000000ull,
+ 59000000000000ull,
+ 94000000000000ull,
+ 95000000000000ull,
+ 850000000000000ull,
+ 851000000000000ull,
+ 98000000000000ull,
+ 99000000000000ull,
+
+ 60000000000000ull,
+ 61000000000000ull,
+ 62000000000000ull,
+ 63000000000000ull,
+ 64000000000000ull,
+ 65000000000000ull,
+ 66000000000000ull,
+ 67000000000000ull,
+ 68000000000000ull,
+ 69000000000000ull,
+ 86000000000000ull,
+ 87000000000000ull,
+ 860000000000000ull,
+ 861000000000000ull,
+ 888000000000000ull,
+ 889000000000000ull,
+
+ 70000000000000ull,
+ 71000000000000ull,
+ 72000000000000ull,
+ 73000000000000ull,
+ 74000000000000ull,
+ 75000000000000ull,
+ 76000000000000ull,
+ 77000000000000ull,
+ 78000000000000ull,
+ 79000000000000ull,
+ 96000000000000ull,
+ 97000000000000ull,
+ 870000000000000ull,
+ 871000000000000ull,
+ 898000000000000ull,
+ 899000000000000ull,
+
+ 100000000000000ull,
+ 101000000000000ull,
+ 102000000000000ull,
+ 103000000000000ull,
+ 104000000000000ull,
+ 105000000000000ull,
+ 106000000000000ull,
+ 107000000000000ull,
+ 108000000000000ull,
+ 109000000000000ull,
+ 180000000000000ull,
+ 181000000000000ull,
+ 900000000000000ull,
+ 901000000000000ull,
+ 980000000000000ull,
+ 981000000000000ull,
+
+ 110000000000000ull,
+ 111000000000000ull,
+ 112000000000000ull,
+ 113000000000000ull,
+ 114000000000000ull,
+ 115000000000000ull,
+ 116000000000000ull,
+ 117000000000000ull,
+ 118000000000000ull,
+ 119000000000000ull,
+ 190000000000000ull,
+ 191000000000000ull,
+ 910000000000000ull,
+ 911000000000000ull,
+ 990000000000000ull,
+ 991000000000000ull,
+
+ 120000000000000ull,
+ 121000000000000ull,
+ 122000000000000ull,
+ 123000000000000ull,
+ 124000000000000ull,
+ 125000000000000ull,
+ 126000000000000ull,
+ 127000000000000ull,
+ 128000000000000ull,
+ 129000000000000ull,
+ 182000000000000ull,
+ 183000000000000ull,
+ 920000000000000ull,
+ 921000000000000ull,
+ 908000000000000ull,
+ 909000000000000ull,
+
+ 130000000000000ull,
+ 131000000000000ull,
+ 132000000000000ull,
+ 133000000000000ull,
+ 134000000000000ull,
+ 135000000000000ull,
+ 136000000000000ull,
+ 137000000000000ull,
+ 138000000000000ull,
+ 139000000000000ull,
+ 192000000000000ull,
+ 193000000000000ull,
+ 930000000000000ull,
+ 931000000000000ull,
+ 918000000000000ull,
+ 919000000000000ull,
+
+ 140000000000000ull,
+ 141000000000000ull,
+ 142000000000000ull,
+ 143000000000000ull,
+ 144000000000000ull,
+ 145000000000000ull,
+ 146000000000000ull,
+ 147000000000000ull,
+ 148000000000000ull,
+ 149000000000000ull,
+ 184000000000000ull,
+ 185000000000000ull,
+ 940000000000000ull,
+ 941000000000000ull,
+ 188000000000000ull,
+ 189000000000000ull,
+
+ 150000000000000ull,
+ 151000000000000ull,
+ 152000000000000ull,
+ 153000000000000ull,
+ 154000000000000ull,
+ 155000000000000ull,
+ 156000000000000ull,
+ 157000000000000ull,
+ 158000000000000ull,
+ 159000000000000ull,
+ 194000000000000ull,
+ 195000000000000ull,
+ 950000000000000ull,
+ 951000000000000ull,
+ 198000000000000ull,
+ 199000000000000ull,
+
+ 160000000000000ull,
+ 161000000000000ull,
+ 162000000000000ull,
+ 163000000000000ull,
+ 164000000000000ull,
+ 165000000000000ull,
+ 166000000000000ull,
+ 167000000000000ull,
+ 168000000000000ull,
+ 169000000000000ull,
+ 186000000000000ull,
+ 187000000000000ull,
+ 960000000000000ull,
+ 961000000000000ull,
+ 988000000000000ull,
+ 989000000000000ull,
+
+ 170000000000000ull,
+ 171000000000000ull,
+ 172000000000000ull,
+ 173000000000000ull,
+ 174000000000000ull,
+ 175000000000000ull,
+ 176000000000000ull,
+ 177000000000000ull,
+ 178000000000000ull,
+ 179000000000000ull,
+ 196000000000000ull,
+ 197000000000000ull,
+ 970000000000000ull,
+ 971000000000000ull,
+ 998000000000000ull,
+ 999000000000000ull,
+
+ 200000000000000ull,
+ 201000000000000ull,
+ 202000000000000ull,
+ 203000000000000ull,
+ 204000000000000ull,
+ 205000000000000ull,
+ 206000000000000ull,
+ 207000000000000ull,
+ 208000000000000ull,
+ 209000000000000ull,
+ 280000000000000ull,
+ 281000000000000ull,
+ 802000000000000ull,
+ 803000000000000ull,
+ 882000000000000ull,
+ 883000000000000ull,
+
+ 210000000000000ull,
+ 211000000000000ull,
+ 212000000000000ull,
+ 213000000000000ull,
+ 214000000000000ull,
+ 215000000000000ull,
+ 216000000000000ull,
+ 217000000000000ull,
+ 218000000000000ull,
+ 219000000000000ull,
+ 290000000000000ull,
+ 291000000000000ull,
+ 812000000000000ull,
+ 813000000000000ull,
+ 892000000000000ull,
+ 893000000000000ull,
+
+ 220000000000000ull,
+ 221000000000000ull,
+ 222000000000000ull,
+ 223000000000000ull,
+ 224000000000000ull,
+ 225000000000000ull,
+ 226000000000000ull,
+ 227000000000000ull,
+ 228000000000000ull,
+ 229000000000000ull,
+ 282000000000000ull,
+ 283000000000000ull,
+ 822000000000000ull,
+ 823000000000000ull,
+ 828000000000000ull,
+ 829000000000000ull,
+
+ 230000000000000ull,
+ 231000000000000ull,
+ 232000000000000ull,
+ 233000000000000ull,
+ 234000000000000ull,
+ 235000000000000ull,
+ 236000000000000ull,
+ 237000000000000ull,
+ 238000000000000ull,
+ 239000000000000ull,
+ 292000000000000ull,
+ 293000000000000ull,
+ 832000000000000ull,
+ 833000000000000ull,
+ 838000000000000ull,
+ 839000000000000ull,
+
+ 240000000000000ull,
+ 241000000000000ull,
+ 242000000000000ull,
+ 243000000000000ull,
+ 244000000000000ull,
+ 245000000000000ull,
+ 246000000000000ull,
+ 247000000000000ull,
+ 248000000000000ull,
+ 249000000000000ull,
+ 284000000000000ull,
+ 285000000000000ull,
+ 842000000000000ull,
+ 843000000000000ull,
+ 288000000000000ull,
+ 289000000000000ull,
+
+ 250000000000000ull,
+ 251000000000000ull,
+ 252000000000000ull,
+ 253000000000000ull,
+ 254000000000000ull,
+ 255000000000000ull,
+ 256000000000000ull,
+ 257000000000000ull,
+ 258000000000000ull,
+ 259000000000000ull,
+ 294000000000000ull,
+ 295000000000000ull,
+ 852000000000000ull,
+ 853000000000000ull,
+ 298000000000000ull,
+ 299000000000000ull,
+
+ 260000000000000ull,
+ 261000000000000ull,
+ 262000000000000ull,
+ 263000000000000ull,
+ 264000000000000ull,
+ 265000000000000ull,
+ 266000000000000ull,
+ 267000000000000ull,
+ 268000000000000ull,
+ 269000000000000ull,
+ 286000000000000ull,
+ 287000000000000ull,
+ 862000000000000ull,
+ 863000000000000ull,
+ 888000000000000ull,
+ 889000000000000ull,
+
+ 270000000000000ull,
+ 271000000000000ull,
+ 272000000000000ull,
+ 273000000000000ull,
+ 274000000000000ull,
+ 275000000000000ull,
+ 276000000000000ull,
+ 277000000000000ull,
+ 278000000000000ull,
+ 279000000000000ull,
+ 296000000000000ull,
+ 297000000000000ull,
+ 872000000000000ull,
+ 873000000000000ull,
+ 898000000000000ull,
+ 899000000000000ull,
+
+ 300000000000000ull,
+ 301000000000000ull,
+ 302000000000000ull,
+ 303000000000000ull,
+ 304000000000000ull,
+ 305000000000000ull,
+ 306000000000000ull,
+ 307000000000000ull,
+ 308000000000000ull,
+ 309000000000000ull,
+ 380000000000000ull,
+ 381000000000000ull,
+ 902000000000000ull,
+ 903000000000000ull,
+ 982000000000000ull,
+ 983000000000000ull,
+
+ 310000000000000ull,
+ 311000000000000ull,
+ 312000000000000ull,
+ 313000000000000ull,
+ 314000000000000ull,
+ 315000000000000ull,
+ 316000000000000ull,
+ 317000000000000ull,
+ 318000000000000ull,
+ 319000000000000ull,
+ 390000000000000ull,
+ 391000000000000ull,
+ 912000000000000ull,
+ 913000000000000ull,
+ 992000000000000ull,
+ 993000000000000ull,
+
+ 320000000000000ull,
+ 321000000000000ull,
+ 322000000000000ull,
+ 323000000000000ull,
+ 324000000000000ull,
+ 325000000000000ull,
+ 326000000000000ull,
+ 327000000000000ull,
+ 328000000000000ull,
+ 329000000000000ull,
+ 382000000000000ull,
+ 383000000000000ull,
+ 922000000000000ull,
+ 923000000000000ull,
+ 928000000000000ull,
+ 929000000000000ull,
+
+ 330000000000000ull,
+ 331000000000000ull,
+ 332000000000000ull,
+ 333000000000000ull,
+ 334000000000000ull,
+ 335000000000000ull,
+ 336000000000000ull,
+ 337000000000000ull,
+ 338000000000000ull,
+ 339000000000000ull,
+ 392000000000000ull,
+ 393000000000000ull,
+ 932000000000000ull,
+ 933000000000000ull,
+ 938000000000000ull,
+ 939000000000000ull,
+
+ 340000000000000ull,
+ 341000000000000ull,
+ 342000000000000ull,
+ 343000000000000ull,
+ 344000000000000ull,
+ 345000000000000ull,
+ 346000000000000ull,
+ 347000000000000ull,
+ 348000000000000ull,
+ 349000000000000ull,
+ 384000000000000ull,
+ 385000000000000ull,
+ 942000000000000ull,
+ 943000000000000ull,
+ 388000000000000ull,
+ 389000000000000ull,
+
+ 350000000000000ull,
+ 351000000000000ull,
+ 352000000000000ull,
+ 353000000000000ull,
+ 354000000000000ull,
+ 355000000000000ull,
+ 356000000000000ull,
+ 357000000000000ull,
+ 358000000000000ull,
+ 359000000000000ull,
+ 394000000000000ull,
+ 395000000000000ull,
+ 952000000000000ull,
+ 953000000000000ull,
+ 398000000000000ull,
+ 399000000000000ull,
+
+ 360000000000000ull,
+ 361000000000000ull,
+ 362000000000000ull,
+ 363000000000000ull,
+ 364000000000000ull,
+ 365000000000000ull,
+ 366000000000000ull,
+ 367000000000000ull,
+ 368000000000000ull,
+ 369000000000000ull,
+ 386000000000000ull,
+ 387000000000000ull,
+ 962000000000000ull,
+ 963000000000000ull,
+ 988000000000000ull,
+ 989000000000000ull,
+
+ 370000000000000ull,
+ 371000000000000ull,
+ 372000000000000ull,
+ 373000000000000ull,
+ 374000000000000ull,
+ 375000000000000ull,
+ 376000000000000ull,
+ 377000000000000ull,
+ 378000000000000ull,
+ 379000000000000ull,
+ 396000000000000ull,
+ 397000000000000ull,
+ 972000000000000ull,
+ 973000000000000ull,
+ 998000000000000ull,
+ 999000000000000ull,
+
+ 400000000000000ull,
+ 401000000000000ull,
+ 402000000000000ull,
+ 403000000000000ull,
+ 404000000000000ull,
+ 405000000000000ull,
+ 406000000000000ull,
+ 407000000000000ull,
+ 408000000000000ull,
+ 409000000000000ull,
+ 480000000000000ull,
+ 481000000000000ull,
+ 804000000000000ull,
+ 805000000000000ull,
+ 884000000000000ull,
+ 885000000000000ull,
+
+ 410000000000000ull,
+ 411000000000000ull,
+ 412000000000000ull,
+ 413000000000000ull,
+ 414000000000000ull,
+ 415000000000000ull,
+ 416000000000000ull,
+ 417000000000000ull,
+ 418000000000000ull,
+ 419000000000000ull,
+ 490000000000000ull,
+ 491000000000000ull,
+ 814000000000000ull,
+ 815000000000000ull,
+ 894000000000000ull,
+ 895000000000000ull,
+
+ 420000000000000ull,
+ 421000000000000ull,
+ 422000000000000ull,
+ 423000000000000ull,
+ 424000000000000ull,
+ 425000000000000ull,
+ 426000000000000ull,
+ 427000000000000ull,
+ 428000000000000ull,
+ 429000000000000ull,
+ 482000000000000ull,
+ 483000000000000ull,
+ 824000000000000ull,
+ 825000000000000ull,
+ 848000000000000ull,
+ 849000000000000ull,
+
+ 430000000000000ull,
+ 431000000000000ull,
+ 432000000000000ull,
+ 433000000000000ull,
+ 434000000000000ull,
+ 435000000000000ull,
+ 436000000000000ull,
+ 437000000000000ull,
+ 438000000000000ull,
+ 439000000000000ull,
+ 492000000000000ull,
+ 493000000000000ull,
+ 834000000000000ull,
+ 835000000000000ull,
+ 858000000000000ull,
+ 859000000000000ull,
+
+ 440000000000000ull,
+ 441000000000000ull,
+ 442000000000000ull,
+ 443000000000000ull,
+ 444000000000000ull,
+ 445000000000000ull,
+ 446000000000000ull,
+ 447000000000000ull,
+ 448000000000000ull,
+ 449000000000000ull,
+ 484000000000000ull,
+ 485000000000000ull,
+ 844000000000000ull,
+ 845000000000000ull,
+ 488000000000000ull,
+ 489000000000000ull,
+
+ 450000000000000ull,
+ 451000000000000ull,
+ 452000000000000ull,
+ 453000000000000ull,
+ 454000000000000ull,
+ 455000000000000ull,
+ 456000000000000ull,
+ 457000000000000ull,
+ 458000000000000ull,
+ 459000000000000ull,
+ 494000000000000ull,
+ 495000000000000ull,
+ 854000000000000ull,
+ 855000000000000ull,
+ 498000000000000ull,
+ 499000000000000ull,
+
+ 460000000000000ull,
+ 461000000000000ull,
+ 462000000000000ull,
+ 463000000000000ull,
+ 464000000000000ull,
+ 465000000000000ull,
+ 466000000000000ull,
+ 467000000000000ull,
+ 468000000000000ull,
+ 469000000000000ull,
+ 486000000000000ull,
+ 487000000000000ull,
+ 864000000000000ull,
+ 865000000000000ull,
+ 888000000000000ull,
+ 889000000000000ull,
+
+ 470000000000000ull,
+ 471000000000000ull,
+ 472000000000000ull,
+ 473000000000000ull,
+ 474000000000000ull,
+ 475000000000000ull,
+ 476000000000000ull,
+ 477000000000000ull,
+ 478000000000000ull,
+ 479000000000000ull,
+ 496000000000000ull,
+ 497000000000000ull,
+ 874000000000000ull,
+ 875000000000000ull,
+ 898000000000000ull,
+ 899000000000000ull,
+
+ 500000000000000ull,
+ 501000000000000ull,
+ 502000000000000ull,
+ 503000000000000ull,
+ 504000000000000ull,
+ 505000000000000ull,
+ 506000000000000ull,
+ 507000000000000ull,
+ 508000000000000ull,
+ 509000000000000ull,
+ 580000000000000ull,
+ 581000000000000ull,
+ 904000000000000ull,
+ 905000000000000ull,
+ 984000000000000ull,
+ 985000000000000ull,
+
+ 510000000000000ull,
+ 511000000000000ull,
+ 512000000000000ull,
+ 513000000000000ull,
+ 514000000000000ull,
+ 515000000000000ull,
+ 516000000000000ull,
+ 517000000000000ull,
+ 518000000000000ull,
+ 519000000000000ull,
+ 590000000000000ull,
+ 591000000000000ull,
+ 914000000000000ull,
+ 915000000000000ull,
+ 994000000000000ull,
+ 995000000000000ull,
+
+ 520000000000000ull,
+ 521000000000000ull,
+ 522000000000000ull,
+ 523000000000000ull,
+ 524000000000000ull,
+ 525000000000000ull,
+ 526000000000000ull,
+ 527000000000000ull,
+ 528000000000000ull,
+ 529000000000000ull,
+ 582000000000000ull,
+ 583000000000000ull,
+ 924000000000000ull,
+ 925000000000000ull,
+ 948000000000000ull,
+ 949000000000000ull,
+
+ 530000000000000ull,
+ 531000000000000ull,
+ 532000000000000ull,
+ 533000000000000ull,
+ 534000000000000ull,
+ 535000000000000ull,
+ 536000000000000ull,
+ 537000000000000ull,
+ 538000000000000ull,
+ 539000000000000ull,
+ 592000000000000ull,
+ 593000000000000ull,
+ 934000000000000ull,
+ 935000000000000ull,
+ 958000000000000ull,
+ 959000000000000ull,
+
+ 540000000000000ull,
+ 541000000000000ull,
+ 542000000000000ull,
+ 543000000000000ull,
+ 544000000000000ull,
+ 545000000000000ull,
+ 546000000000000ull,
+ 547000000000000ull,
+ 548000000000000ull,
+ 549000000000000ull,
+ 584000000000000ull,
+ 585000000000000ull,
+ 944000000000000ull,
+ 945000000000000ull,
+ 588000000000000ull,
+ 589000000000000ull,
+
+ 550000000000000ull,
+ 551000000000000ull,
+ 552000000000000ull,
+ 553000000000000ull,
+ 554000000000000ull,
+ 555000000000000ull,
+ 556000000000000ull,
+ 557000000000000ull,
+ 558000000000000ull,
+ 559000000000000ull,
+ 594000000000000ull,
+ 595000000000000ull,
+ 954000000000000ull,
+ 955000000000000ull,
+ 598000000000000ull,
+ 599000000000000ull,
+
+ 560000000000000ull,
+ 561000000000000ull,
+ 562000000000000ull,
+ 563000000000000ull,
+ 564000000000000ull,
+ 565000000000000ull,
+ 566000000000000ull,
+ 567000000000000ull,
+ 568000000000000ull,
+ 569000000000000ull,
+ 586000000000000ull,
+ 587000000000000ull,
+ 964000000000000ull,
+ 965000000000000ull,
+ 988000000000000ull,
+ 989000000000000ull,
+
+ 570000000000000ull,
+ 571000000000000ull,
+ 572000000000000ull,
+ 573000000000000ull,
+ 574000000000000ull,
+ 575000000000000ull,
+ 576000000000000ull,
+ 577000000000000ull,
+ 578000000000000ull,
+ 579000000000000ull,
+ 596000000000000ull,
+ 597000000000000ull,
+ 974000000000000ull,
+ 975000000000000ull,
+ 998000000000000ull,
+ 999000000000000ull,
+
+ 600000000000000ull,
+ 601000000000000ull,
+ 602000000000000ull,
+ 603000000000000ull,
+ 604000000000000ull,
+ 605000000000000ull,
+ 606000000000000ull,
+ 607000000000000ull,
+ 608000000000000ull,
+ 609000000000000ull,
+ 680000000000000ull,
+ 681000000000000ull,
+ 806000000000000ull,
+ 807000000000000ull,
+ 886000000000000ull,
+ 887000000000000ull,
+
+ 610000000000000ull,
+ 611000000000000ull,
+ 612000000000000ull,
+ 613000000000000ull,
+ 614000000000000ull,
+ 615000000000000ull,
+ 616000000000000ull,
+ 617000000000000ull,
+ 618000000000000ull,
+ 619000000000000ull,
+ 690000000000000ull,
+ 691000000000000ull,
+ 816000000000000ull,
+ 817000000000000ull,
+ 896000000000000ull,
+ 897000000000000ull,
+
+ 620000000000000ull,
+ 621000000000000ull,
+ 622000000000000ull,
+ 623000000000000ull,
+ 624000000000000ull,
+ 625000000000000ull,
+ 626000000000000ull,
+ 627000000000000ull,
+ 628000000000000ull,
+ 629000000000000ull,
+ 682000000000000ull,
+ 683000000000000ull,
+ 826000000000000ull,
+ 827000000000000ull,
+ 868000000000000ull,
+ 869000000000000ull,
+
+ 630000000000000ull,
+ 631000000000000ull,
+ 632000000000000ull,
+ 633000000000000ull,
+ 634000000000000ull,
+ 635000000000000ull,
+ 636000000000000ull,
+ 637000000000000ull,
+ 638000000000000ull,
+ 639000000000000ull,
+ 692000000000000ull,
+ 693000000000000ull,
+ 836000000000000ull,
+ 837000000000000ull,
+ 878000000000000ull,
+ 879000000000000ull,
+
+ 640000000000000ull,
+ 641000000000000ull,
+ 642000000000000ull,
+ 643000000000000ull,
+ 644000000000000ull,
+ 645000000000000ull,
+ 646000000000000ull,
+ 647000000000000ull,
+ 648000000000000ull,
+ 649000000000000ull,
+ 684000000000000ull,
+ 685000000000000ull,
+ 846000000000000ull,
+ 847000000000000ull,
+ 688000000000000ull,
+ 689000000000000ull,
+
+ 650000000000000ull,
+ 651000000000000ull,
+ 652000000000000ull,
+ 653000000000000ull,
+ 654000000000000ull,
+ 655000000000000ull,
+ 656000000000000ull,
+ 657000000000000ull,
+ 658000000000000ull,
+ 659000000000000ull,
+ 694000000000000ull,
+ 695000000000000ull,
+ 856000000000000ull,
+ 857000000000000ull,
+ 698000000000000ull,
+ 699000000000000ull,
+
+ 660000000000000ull,
+ 661000000000000ull,
+ 662000000000000ull,
+ 663000000000000ull,
+ 664000000000000ull,
+ 665000000000000ull,
+ 666000000000000ull,
+ 667000000000000ull,
+ 668000000000000ull,
+ 669000000000000ull,
+ 686000000000000ull,
+ 687000000000000ull,
+ 866000000000000ull,
+ 867000000000000ull,
+ 888000000000000ull,
+ 889000000000000ull,
+
+ 670000000000000ull,
+ 671000000000000ull,
+ 672000000000000ull,
+ 673000000000000ull,
+ 674000000000000ull,
+ 675000000000000ull,
+ 676000000000000ull,
+ 677000000000000ull,
+ 678000000000000ull,
+ 679000000000000ull,
+ 696000000000000ull,
+ 697000000000000ull,
+ 876000000000000ull,
+ 877000000000000ull,
+ 898000000000000ull,
+ 899000000000000ull,
+
+ 700000000000000ull,
+ 701000000000000ull,
+ 702000000000000ull,
+ 703000000000000ull,
+ 704000000000000ull,
+ 705000000000000ull,
+ 706000000000000ull,
+ 707000000000000ull,
+ 708000000000000ull,
+ 709000000000000ull,
+ 780000000000000ull,
+ 781000000000000ull,
+ 906000000000000ull,
+ 907000000000000ull,
+ 986000000000000ull,
+ 987000000000000ull,
+
+ 710000000000000ull,
+ 711000000000000ull,
+ 712000000000000ull,
+ 713000000000000ull,
+ 714000000000000ull,
+ 715000000000000ull,
+ 716000000000000ull,
+ 717000000000000ull,
+ 718000000000000ull,
+ 719000000000000ull,
+ 790000000000000ull,
+ 791000000000000ull,
+ 916000000000000ull,
+ 917000000000000ull,
+ 996000000000000ull,
+ 997000000000000ull,
+
+ 720000000000000ull,
+ 721000000000000ull,
+ 722000000000000ull,
+ 723000000000000ull,
+ 724000000000000ull,
+ 725000000000000ull,
+ 726000000000000ull,
+ 727000000000000ull,
+ 728000000000000ull,
+ 729000000000000ull,
+ 782000000000000ull,
+ 783000000000000ull,
+ 926000000000000ull,
+ 927000000000000ull,
+ 968000000000000ull,
+ 969000000000000ull,
+
+ 730000000000000ull,
+ 731000000000000ull,
+ 732000000000000ull,
+ 733000000000000ull,
+ 734000000000000ull,
+ 735000000000000ull,
+ 736000000000000ull,
+ 737000000000000ull,
+ 738000000000000ull,
+ 739000000000000ull,
+ 792000000000000ull,
+ 793000000000000ull,
+ 936000000000000ull,
+ 937000000000000ull,
+ 978000000000000ull,
+ 979000000000000ull,
+
+ 740000000000000ull,
+ 741000000000000ull,
+ 742000000000000ull,
+ 743000000000000ull,
+ 744000000000000ull,
+ 745000000000000ull,
+ 746000000000000ull,
+ 747000000000000ull,
+ 748000000000000ull,
+ 749000000000000ull,
+ 784000000000000ull,
+ 785000000000000ull,
+ 946000000000000ull,
+ 947000000000000ull,
+ 788000000000000ull,
+ 789000000000000ull,
+
+ 750000000000000ull,
+ 751000000000000ull,
+ 752000000000000ull,
+ 753000000000000ull,
+ 754000000000000ull,
+ 755000000000000ull,
+ 756000000000000ull,
+ 757000000000000ull,
+ 758000000000000ull,
+ 759000000000000ull,
+ 794000000000000ull,
+ 795000000000000ull,
+ 956000000000000ull,
+ 957000000000000ull,
+ 798000000000000ull,
+ 799000000000000ull,
+
+ 760000000000000ull,
+ 761000000000000ull,
+ 762000000000000ull,
+ 763000000000000ull,
+ 764000000000000ull,
+ 765000000000000ull,
+ 766000000000000ull,
+ 767000000000000ull,
+ 768000000000000ull,
+ 769000000000000ull,
+ 786000000000000ull,
+ 787000000000000ull,
+ 966000000000000ull,
+ 967000000000000ull,
+ 988000000000000ull,
+ 989000000000000ull,
+
+ 770000000000000ull,
+ 771000000000000ull,
+ 772000000000000ull,
+ 773000000000000ull,
+ 774000000000000ull,
+ 775000000000000ull,
+ 776000000000000ull,
+ 777000000000000ull,
+ 778000000000000ull,
+ 779000000000000ull,
+ 796000000000000ull,
+ 797000000000000ull,
+ 976000000000000ull,
+ 977000000000000ull,
+ 998000000000000ull,
+ 999000000000000ull
+};
+
+static const UINT64 d2b6[] = {
+ 0000000000000000ull,
+ 1000000000000000ull,
+ 2000000000000000ull,
+ 3000000000000000ull,
+ 4000000000000000ull,
+ 5000000000000000ull,
+ 6000000000000000ull,
+ 7000000000000000ull,
+ 8000000000000000ull,
+ 9000000000000000ull,
+ 80000000000000000ull,
+ 81000000000000000ull,
+ 800000000000000000ull,
+ 801000000000000000ull,
+ 880000000000000000ull,
+ 881000000000000000ull,
+
+ 10000000000000000ull,
+ 11000000000000000ull,
+ 12000000000000000ull,
+ 13000000000000000ull,
+ 14000000000000000ull,
+ 15000000000000000ull,
+ 16000000000000000ull,
+ 17000000000000000ull,
+ 18000000000000000ull,
+ 19000000000000000ull,
+ 90000000000000000ull,
+ 91000000000000000ull,
+ 810000000000000000ull,
+ 811000000000000000ull,
+ 890000000000000000ull,
+ 891000000000000000ull,
+
+ 20000000000000000ull,
+ 21000000000000000ull,
+ 22000000000000000ull,
+ 23000000000000000ull,
+ 24000000000000000ull,
+ 25000000000000000ull,
+ 26000000000000000ull,
+ 27000000000000000ull,
+ 28000000000000000ull,
+ 29000000000000000ull,
+ 82000000000000000ull,
+ 83000000000000000ull,
+ 820000000000000000ull,
+ 821000000000000000ull,
+ 808000000000000000ull,
+ 809000000000000000ull,
+
+ 30000000000000000ull,
+ 31000000000000000ull,
+ 32000000000000000ull,
+ 33000000000000000ull,
+ 34000000000000000ull,
+ 35000000000000000ull,
+ 36000000000000000ull,
+ 37000000000000000ull,
+ 38000000000000000ull,
+ 39000000000000000ull,
+ 92000000000000000ull,
+ 93000000000000000ull,
+ 830000000000000000ull,
+ 831000000000000000ull,
+ 818000000000000000ull,
+ 819000000000000000ull,
+
+ 40000000000000000ull,
+ 41000000000000000ull,
+ 42000000000000000ull,
+ 43000000000000000ull,
+ 44000000000000000ull,
+ 45000000000000000ull,
+ 46000000000000000ull,
+ 47000000000000000ull,
+ 48000000000000000ull,
+ 49000000000000000ull,
+ 84000000000000000ull,
+ 85000000000000000ull,
+ 840000000000000000ull,
+ 841000000000000000ull,
+ 88000000000000000ull,
+ 89000000000000000ull,
+
+ 50000000000000000ull,
+ 51000000000000000ull,
+ 52000000000000000ull,
+ 53000000000000000ull,
+ 54000000000000000ull,
+ 55000000000000000ull,
+ 56000000000000000ull,
+ 57000000000000000ull,
+ 58000000000000000ull,
+ 59000000000000000ull,
+ 94000000000000000ull,
+ 95000000000000000ull,
+ 850000000000000000ull,
+ 851000000000000000ull,
+ 98000000000000000ull,
+ 99000000000000000ull,
+
+ 60000000000000000ull,
+ 61000000000000000ull,
+ 62000000000000000ull,
+ 63000000000000000ull,
+ 64000000000000000ull,
+ 65000000000000000ull,
+ 66000000000000000ull,
+ 67000000000000000ull,
+ 68000000000000000ull,
+ 69000000000000000ull,
+ 86000000000000000ull,
+ 87000000000000000ull,
+ 860000000000000000ull,
+ 861000000000000000ull,
+ 888000000000000000ull,
+ 889000000000000000ull,
+
+ 70000000000000000ull,
+ 71000000000000000ull,
+ 72000000000000000ull,
+ 73000000000000000ull,
+ 74000000000000000ull,
+ 75000000000000000ull,
+ 76000000000000000ull,
+ 77000000000000000ull,
+ 78000000000000000ull,
+ 79000000000000000ull,
+ 96000000000000000ull,
+ 97000000000000000ull,
+ 870000000000000000ull,
+ 871000000000000000ull,
+ 898000000000000000ull,
+ 899000000000000000ull,
+
+ 100000000000000000ull,
+ 101000000000000000ull,
+ 102000000000000000ull,
+ 103000000000000000ull,
+ 104000000000000000ull,
+ 105000000000000000ull,
+ 106000000000000000ull,
+ 107000000000000000ull,
+ 108000000000000000ull,
+ 109000000000000000ull,
+ 180000000000000000ull,
+ 181000000000000000ull,
+ 900000000000000000ull,
+ 901000000000000000ull,
+ 980000000000000000ull,
+ 981000000000000000ull,
+
+ 110000000000000000ull,
+ 111000000000000000ull,
+ 112000000000000000ull,
+ 113000000000000000ull,
+ 114000000000000000ull,
+ 115000000000000000ull,
+ 116000000000000000ull,
+ 117000000000000000ull,
+ 118000000000000000ull,
+ 119000000000000000ull,
+ 190000000000000000ull,
+ 191000000000000000ull,
+ 910000000000000000ull,
+ 911000000000000000ull,
+ 990000000000000000ull,
+ 991000000000000000ull,
+
+ 120000000000000000ull,
+ 121000000000000000ull,
+ 122000000000000000ull,
+ 123000000000000000ull,
+ 124000000000000000ull,
+ 125000000000000000ull,
+ 126000000000000000ull,
+ 127000000000000000ull,
+ 128000000000000000ull,
+ 129000000000000000ull,
+ 182000000000000000ull,
+ 183000000000000000ull,
+ 920000000000000000ull,
+ 921000000000000000ull,
+ 908000000000000000ull,
+ 909000000000000000ull,
+
+ 130000000000000000ull,
+ 131000000000000000ull,
+ 132000000000000000ull,
+ 133000000000000000ull,
+ 134000000000000000ull,
+ 135000000000000000ull,
+ 136000000000000000ull,
+ 137000000000000000ull,
+ 138000000000000000ull,
+ 139000000000000000ull,
+ 192000000000000000ull,
+ 193000000000000000ull,
+ 930000000000000000ull,
+ 931000000000000000ull,
+ 918000000000000000ull,
+ 919000000000000000ull,
+
+ 140000000000000000ull,
+ 141000000000000000ull,
+ 142000000000000000ull,
+ 143000000000000000ull,
+ 144000000000000000ull,
+ 145000000000000000ull,
+ 146000000000000000ull,
+ 147000000000000000ull,
+ 148000000000000000ull,
+ 149000000000000000ull,
+ 184000000000000000ull,
+ 185000000000000000ull,
+ 940000000000000000ull,
+ 941000000000000000ull,
+ 188000000000000000ull,
+ 189000000000000000ull,
+
+ 150000000000000000ull,
+ 151000000000000000ull,
+ 152000000000000000ull,
+ 153000000000000000ull,
+ 154000000000000000ull,
+ 155000000000000000ull,
+ 156000000000000000ull,
+ 157000000000000000ull,
+ 158000000000000000ull,
+ 159000000000000000ull,
+ 194000000000000000ull,
+ 195000000000000000ull,
+ 950000000000000000ull,
+ 951000000000000000ull,
+ 198000000000000000ull,
+ 199000000000000000ull,
+
+ 160000000000000000ull,
+ 161000000000000000ull,
+ 162000000000000000ull,
+ 163000000000000000ull,
+ 164000000000000000ull,
+ 165000000000000000ull,
+ 166000000000000000ull,
+ 167000000000000000ull,
+ 168000000000000000ull,
+ 169000000000000000ull,
+ 186000000000000000ull,
+ 187000000000000000ull,
+ 960000000000000000ull,
+ 961000000000000000ull,
+ 988000000000000000ull,
+ 989000000000000000ull,
+
+ 170000000000000000ull,
+ 171000000000000000ull,
+ 172000000000000000ull,
+ 173000000000000000ull,
+ 174000000000000000ull,
+ 175000000000000000ull,
+ 176000000000000000ull,
+ 177000000000000000ull,
+ 178000000000000000ull,
+ 179000000000000000ull,
+ 196000000000000000ull,
+ 197000000000000000ull,
+ 970000000000000000ull,
+ 971000000000000000ull,
+ 998000000000000000ull,
+ 999000000000000000ull,
+
+ 200000000000000000ull,
+ 201000000000000000ull,
+ 202000000000000000ull,
+ 203000000000000000ull,
+ 204000000000000000ull,
+ 205000000000000000ull,
+ 206000000000000000ull,
+ 207000000000000000ull,
+ 208000000000000000ull,
+ 209000000000000000ull,
+ 280000000000000000ull,
+ 281000000000000000ull,
+ 802000000000000000ull,
+ 803000000000000000ull,
+ 882000000000000000ull,
+ 883000000000000000ull,
+
+ 210000000000000000ull,
+ 211000000000000000ull,
+ 212000000000000000ull,
+ 213000000000000000ull,
+ 214000000000000000ull,
+ 215000000000000000ull,
+ 216000000000000000ull,
+ 217000000000000000ull,
+ 218000000000000000ull,
+ 219000000000000000ull,
+ 290000000000000000ull,
+ 291000000000000000ull,
+ 812000000000000000ull,
+ 813000000000000000ull,
+ 892000000000000000ull,
+ 893000000000000000ull,
+
+ 220000000000000000ull,
+ 221000000000000000ull,
+ 222000000000000000ull,
+ 223000000000000000ull,
+ 224000000000000000ull,
+ 225000000000000000ull,
+ 226000000000000000ull,
+ 227000000000000000ull,
+ 228000000000000000ull,
+ 229000000000000000ull,
+ 282000000000000000ull,
+ 283000000000000000ull,
+ 822000000000000000ull,
+ 823000000000000000ull,
+ 828000000000000000ull,
+ 829000000000000000ull,
+
+ 230000000000000000ull,
+ 231000000000000000ull,
+ 232000000000000000ull,
+ 233000000000000000ull,
+ 234000000000000000ull,
+ 235000000000000000ull,
+ 236000000000000000ull,
+ 237000000000000000ull,
+ 238000000000000000ull,
+ 239000000000000000ull,
+ 292000000000000000ull,
+ 293000000000000000ull,
+ 832000000000000000ull,
+ 833000000000000000ull,
+ 838000000000000000ull,
+ 839000000000000000ull,
+
+ 240000000000000000ull,
+ 241000000000000000ull,
+ 242000000000000000ull,
+ 243000000000000000ull,
+ 244000000000000000ull,
+ 245000000000000000ull,
+ 246000000000000000ull,
+ 247000000000000000ull,
+ 248000000000000000ull,
+ 249000000000000000ull,
+ 284000000000000000ull,
+ 285000000000000000ull,
+ 842000000000000000ull,
+ 843000000000000000ull,
+ 288000000000000000ull,
+ 289000000000000000ull,
+
+ 250000000000000000ull,
+ 251000000000000000ull,
+ 252000000000000000ull,
+ 253000000000000000ull,
+ 254000000000000000ull,
+ 255000000000000000ull,
+ 256000000000000000ull,
+ 257000000000000000ull,
+ 258000000000000000ull,
+ 259000000000000000ull,
+ 294000000000000000ull,
+ 295000000000000000ull,
+ 852000000000000000ull,
+ 853000000000000000ull,
+ 298000000000000000ull,
+ 299000000000000000ull,
+
+ 260000000000000000ull,
+ 261000000000000000ull,
+ 262000000000000000ull,
+ 263000000000000000ull,
+ 264000000000000000ull,
+ 265000000000000000ull,
+ 266000000000000000ull,
+ 267000000000000000ull,
+ 268000000000000000ull,
+ 269000000000000000ull,
+ 286000000000000000ull,
+ 287000000000000000ull,
+ 862000000000000000ull,
+ 863000000000000000ull,
+ 888000000000000000ull,
+ 889000000000000000ull,
+
+ 270000000000000000ull,
+ 271000000000000000ull,
+ 272000000000000000ull,
+ 273000000000000000ull,
+ 274000000000000000ull,
+ 275000000000000000ull,
+ 276000000000000000ull,
+ 277000000000000000ull,
+ 278000000000000000ull,
+ 279000000000000000ull,
+ 296000000000000000ull,
+ 297000000000000000ull,
+ 872000000000000000ull,
+ 873000000000000000ull,
+ 898000000000000000ull,
+ 899000000000000000ull,
+
+ 300000000000000000ull,
+ 301000000000000000ull,
+ 302000000000000000ull,
+ 303000000000000000ull,
+ 304000000000000000ull,
+ 305000000000000000ull,
+ 306000000000000000ull,
+ 307000000000000000ull,
+ 308000000000000000ull,
+ 309000000000000000ull,
+ 380000000000000000ull,
+ 381000000000000000ull,
+ 902000000000000000ull,
+ 903000000000000000ull,
+ 982000000000000000ull,
+ 983000000000000000ull,
+
+ 310000000000000000ull,
+ 311000000000000000ull,
+ 312000000000000000ull,
+ 313000000000000000ull,
+ 314000000000000000ull,
+ 315000000000000000ull,
+ 316000000000000000ull,
+ 317000000000000000ull,
+ 318000000000000000ull,
+ 319000000000000000ull,
+ 390000000000000000ull,
+ 391000000000000000ull,
+ 912000000000000000ull,
+ 913000000000000000ull,
+ 992000000000000000ull,
+ 993000000000000000ull,
+
+ 320000000000000000ull,
+ 321000000000000000ull,
+ 322000000000000000ull,
+ 323000000000000000ull,
+ 324000000000000000ull,
+ 325000000000000000ull,
+ 326000000000000000ull,
+ 327000000000000000ull,
+ 328000000000000000ull,
+ 329000000000000000ull,
+ 382000000000000000ull,
+ 383000000000000000ull,
+ 922000000000000000ull,
+ 923000000000000000ull,
+ 928000000000000000ull,
+ 929000000000000000ull,
+
+ 330000000000000000ull,
+ 331000000000000000ull,
+ 332000000000000000ull,
+ 333000000000000000ull,
+ 334000000000000000ull,
+ 335000000000000000ull,
+ 336000000000000000ull,
+ 337000000000000000ull,
+ 338000000000000000ull,
+ 339000000000000000ull,
+ 392000000000000000ull,
+ 393000000000000000ull,
+ 932000000000000000ull,
+ 933000000000000000ull,
+ 938000000000000000ull,
+ 939000000000000000ull,
+
+ 340000000000000000ull,
+ 341000000000000000ull,
+ 342000000000000000ull,
+ 343000000000000000ull,
+ 344000000000000000ull,
+ 345000000000000000ull,
+ 346000000000000000ull,
+ 347000000000000000ull,
+ 348000000000000000ull,
+ 349000000000000000ull,
+ 384000000000000000ull,
+ 385000000000000000ull,
+ 942000000000000000ull,
+ 943000000000000000ull,
+ 388000000000000000ull,
+ 389000000000000000ull,
+
+ 350000000000000000ull,
+ 351000000000000000ull,
+ 352000000000000000ull,
+ 353000000000000000ull,
+ 354000000000000000ull,
+ 355000000000000000ull,
+ 356000000000000000ull,
+ 357000000000000000ull,
+ 358000000000000000ull,
+ 359000000000000000ull,
+ 394000000000000000ull,
+ 395000000000000000ull,
+ 952000000000000000ull,
+ 953000000000000000ull,
+ 398000000000000000ull,
+ 399000000000000000ull,
+
+ 360000000000000000ull,
+ 361000000000000000ull,
+ 362000000000000000ull,
+ 363000000000000000ull,
+ 364000000000000000ull,
+ 365000000000000000ull,
+ 366000000000000000ull,
+ 367000000000000000ull,
+ 368000000000000000ull,
+ 369000000000000000ull,
+ 386000000000000000ull,
+ 387000000000000000ull,
+ 962000000000000000ull,
+ 963000000000000000ull,
+ 988000000000000000ull,
+ 989000000000000000ull,
+
+ 370000000000000000ull,
+ 371000000000000000ull,
+ 372000000000000000ull,
+ 373000000000000000ull,
+ 374000000000000000ull,
+ 375000000000000000ull,
+ 376000000000000000ull,
+ 377000000000000000ull,
+ 378000000000000000ull,
+ 379000000000000000ull,
+ 396000000000000000ull,
+ 397000000000000000ull,
+ 972000000000000000ull,
+ 973000000000000000ull,
+ 998000000000000000ull,
+ 999000000000000000ull,
+
+ 400000000000000000ull,
+ 401000000000000000ull,
+ 402000000000000000ull,
+ 403000000000000000ull,
+ 404000000000000000ull,
+ 405000000000000000ull,
+ 406000000000000000ull,
+ 407000000000000000ull,
+ 408000000000000000ull,
+ 409000000000000000ull,
+ 480000000000000000ull,
+ 481000000000000000ull,
+ 804000000000000000ull,
+ 805000000000000000ull,
+ 884000000000000000ull,
+ 885000000000000000ull,
+
+ 410000000000000000ull,
+ 411000000000000000ull,
+ 412000000000000000ull,
+ 413000000000000000ull,
+ 414000000000000000ull,
+ 415000000000000000ull,
+ 416000000000000000ull,
+ 417000000000000000ull,
+ 418000000000000000ull,
+ 419000000000000000ull,
+ 490000000000000000ull,
+ 491000000000000000ull,
+ 814000000000000000ull,
+ 815000000000000000ull,
+ 894000000000000000ull,
+ 895000000000000000ull,
+
+ 420000000000000000ull,
+ 421000000000000000ull,
+ 422000000000000000ull,
+ 423000000000000000ull,
+ 424000000000000000ull,
+ 425000000000000000ull,
+ 426000000000000000ull,
+ 427000000000000000ull,
+ 428000000000000000ull,
+ 429000000000000000ull,
+ 482000000000000000ull,
+ 483000000000000000ull,
+ 824000000000000000ull,
+ 825000000000000000ull,
+ 848000000000000000ull,
+ 849000000000000000ull,
+
+ 430000000000000000ull,
+ 431000000000000000ull,
+ 432000000000000000ull,
+ 433000000000000000ull,
+ 434000000000000000ull,
+ 435000000000000000ull,
+ 436000000000000000ull,
+ 437000000000000000ull,
+ 438000000000000000ull,
+ 439000000000000000ull,
+ 492000000000000000ull,
+ 493000000000000000ull,
+ 834000000000000000ull,
+ 835000000000000000ull,
+ 858000000000000000ull,
+ 859000000000000000ull,
+
+ 440000000000000000ull,
+ 441000000000000000ull,
+ 442000000000000000ull,
+ 443000000000000000ull,
+ 444000000000000000ull,
+ 445000000000000000ull,
+ 446000000000000000ull,
+ 447000000000000000ull,
+ 448000000000000000ull,
+ 449000000000000000ull,
+ 484000000000000000ull,
+ 485000000000000000ull,
+ 844000000000000000ull,
+ 845000000000000000ull,
+ 488000000000000000ull,
+ 489000000000000000ull,
+
+ 450000000000000000ull,
+ 451000000000000000ull,
+ 452000000000000000ull,
+ 453000000000000000ull,
+ 454000000000000000ull,
+ 455000000000000000ull,
+ 456000000000000000ull,
+ 457000000000000000ull,
+ 458000000000000000ull,
+ 459000000000000000ull,
+ 494000000000000000ull,
+ 495000000000000000ull,
+ 854000000000000000ull,
+ 855000000000000000ull,
+ 498000000000000000ull,
+ 499000000000000000ull,
+
+ 460000000000000000ull,
+ 461000000000000000ull,
+ 462000000000000000ull,
+ 463000000000000000ull,
+ 464000000000000000ull,
+ 465000000000000000ull,
+ 466000000000000000ull,
+ 467000000000000000ull,
+ 468000000000000000ull,
+ 469000000000000000ull,
+ 486000000000000000ull,
+ 487000000000000000ull,
+ 864000000000000000ull,
+ 865000000000000000ull,
+ 888000000000000000ull,
+ 889000000000000000ull,
+
+ 470000000000000000ull,
+ 471000000000000000ull,
+ 472000000000000000ull,
+ 473000000000000000ull,
+ 474000000000000000ull,
+ 475000000000000000ull,
+ 476000000000000000ull,
+ 477000000000000000ull,
+ 478000000000000000ull,
+ 479000000000000000ull,
+ 496000000000000000ull,
+ 497000000000000000ull,
+ 874000000000000000ull,
+ 875000000000000000ull,
+ 898000000000000000ull,
+ 899000000000000000ull,
+
+ 500000000000000000ull,
+ 501000000000000000ull,
+ 502000000000000000ull,
+ 503000000000000000ull,
+ 504000000000000000ull,
+ 505000000000000000ull,
+ 506000000000000000ull,
+ 507000000000000000ull,
+ 508000000000000000ull,
+ 509000000000000000ull,
+ 580000000000000000ull,
+ 581000000000000000ull,
+ 904000000000000000ull,
+ 905000000000000000ull,
+ 984000000000000000ull,
+ 985000000000000000ull,
+
+ 510000000000000000ull,
+ 511000000000000000ull,
+ 512000000000000000ull,
+ 513000000000000000ull,
+ 514000000000000000ull,
+ 515000000000000000ull,
+ 516000000000000000ull,
+ 517000000000000000ull,
+ 518000000000000000ull,
+ 519000000000000000ull,
+ 590000000000000000ull,
+ 591000000000000000ull,
+ 914000000000000000ull,
+ 915000000000000000ull,
+ 994000000000000000ull,
+ 995000000000000000ull,
+
+ 520000000000000000ull,
+ 521000000000000000ull,
+ 522000000000000000ull,
+ 523000000000000000ull,
+ 524000000000000000ull,
+ 525000000000000000ull,
+ 526000000000000000ull,
+ 527000000000000000ull,
+ 528000000000000000ull,
+ 529000000000000000ull,
+ 582000000000000000ull,
+ 583000000000000000ull,
+ 924000000000000000ull,
+ 925000000000000000ull,
+ 948000000000000000ull,
+ 949000000000000000ull,
+
+ 530000000000000000ull,
+ 531000000000000000ull,
+ 532000000000000000ull,
+ 533000000000000000ull,
+ 534000000000000000ull,
+ 535000000000000000ull,
+ 536000000000000000ull,
+ 537000000000000000ull,
+ 538000000000000000ull,
+ 539000000000000000ull,
+ 592000000000000000ull,
+ 593000000000000000ull,
+ 934000000000000000ull,
+ 935000000000000000ull,
+ 958000000000000000ull,
+ 959000000000000000ull,
+
+ 540000000000000000ull,
+ 541000000000000000ull,
+ 542000000000000000ull,
+ 543000000000000000ull,
+ 544000000000000000ull,
+ 545000000000000000ull,
+ 546000000000000000ull,
+ 547000000000000000ull,
+ 548000000000000000ull,
+ 549000000000000000ull,
+ 584000000000000000ull,
+ 585000000000000000ull,
+ 944000000000000000ull,
+ 945000000000000000ull,
+ 588000000000000000ull,
+ 589000000000000000ull,
+
+ 550000000000000000ull,
+ 551000000000000000ull,
+ 552000000000000000ull,
+ 553000000000000000ull,
+ 554000000000000000ull,
+ 555000000000000000ull,
+ 556000000000000000ull,
+ 557000000000000000ull,
+ 558000000000000000ull,
+ 559000000000000000ull,
+ 594000000000000000ull,
+ 595000000000000000ull,
+ 954000000000000000ull,
+ 955000000000000000ull,
+ 598000000000000000ull,
+ 599000000000000000ull,
+
+ 560000000000000000ull,
+ 561000000000000000ull,
+ 562000000000000000ull,
+ 563000000000000000ull,
+ 564000000000000000ull,
+ 565000000000000000ull,
+ 566000000000000000ull,
+ 567000000000000000ull,
+ 568000000000000000ull,
+ 569000000000000000ull,
+ 586000000000000000ull,
+ 587000000000000000ull,
+ 964000000000000000ull,
+ 965000000000000000ull,
+ 988000000000000000ull,
+ 989000000000000000ull,
+
+ 570000000000000000ull,
+ 571000000000000000ull,
+ 572000000000000000ull,
+ 573000000000000000ull,
+ 574000000000000000ull,
+ 575000000000000000ull,
+ 576000000000000000ull,
+ 577000000000000000ull,
+ 578000000000000000ull,
+ 579000000000000000ull,
+ 596000000000000000ull,
+ 597000000000000000ull,
+ 974000000000000000ull,
+ 975000000000000000ull,
+ 998000000000000000ull,
+ 999000000000000000ull,
+
+ 600000000000000000ull,
+ 601000000000000000ull,
+ 602000000000000000ull,
+ 603000000000000000ull,
+ 604000000000000000ull,
+ 605000000000000000ull,
+ 606000000000000000ull,
+ 607000000000000000ull,
+ 608000000000000000ull,
+ 609000000000000000ull,
+ 680000000000000000ull,
+ 681000000000000000ull,
+ 806000000000000000ull,
+ 807000000000000000ull,
+ 886000000000000000ull,
+ 887000000000000000ull,
+
+ 610000000000000000ull,
+ 611000000000000000ull,
+ 612000000000000000ull,
+ 613000000000000000ull,
+ 614000000000000000ull,
+ 615000000000000000ull,
+ 616000000000000000ull,
+ 617000000000000000ull,
+ 618000000000000000ull,
+ 619000000000000000ull,
+ 690000000000000000ull,
+ 691000000000000000ull,
+ 816000000000000000ull,
+ 817000000000000000ull,
+ 896000000000000000ull,
+ 897000000000000000ull,
+
+ 620000000000000000ull,
+ 621000000000000000ull,
+ 622000000000000000ull,
+ 623000000000000000ull,
+ 624000000000000000ull,
+ 625000000000000000ull,
+ 626000000000000000ull,
+ 627000000000000000ull,
+ 628000000000000000ull,
+ 629000000000000000ull,
+ 682000000000000000ull,
+ 683000000000000000ull,
+ 826000000000000000ull,
+ 827000000000000000ull,
+ 868000000000000000ull,
+ 869000000000000000ull,
+
+ 630000000000000000ull,
+ 631000000000000000ull,
+ 632000000000000000ull,
+ 633000000000000000ull,
+ 634000000000000000ull,
+ 635000000000000000ull,
+ 636000000000000000ull,
+ 637000000000000000ull,
+ 638000000000000000ull,
+ 639000000000000000ull,
+ 692000000000000000ull,
+ 693000000000000000ull,
+ 836000000000000000ull,
+ 837000000000000000ull,
+ 878000000000000000ull,
+ 879000000000000000ull,
+
+ 640000000000000000ull,
+ 641000000000000000ull,
+ 642000000000000000ull,
+ 643000000000000000ull,
+ 644000000000000000ull,
+ 645000000000000000ull,
+ 646000000000000000ull,
+ 647000000000000000ull,
+ 648000000000000000ull,
+ 649000000000000000ull,
+ 684000000000000000ull,
+ 685000000000000000ull,
+ 846000000000000000ull,
+ 847000000000000000ull,
+ 688000000000000000ull,
+ 689000000000000000ull,
+
+ 650000000000000000ull,
+ 651000000000000000ull,
+ 652000000000000000ull,
+ 653000000000000000ull,
+ 654000000000000000ull,
+ 655000000000000000ull,
+ 656000000000000000ull,
+ 657000000000000000ull,
+ 658000000000000000ull,
+ 659000000000000000ull,
+ 694000000000000000ull,
+ 695000000000000000ull,
+ 856000000000000000ull,
+ 857000000000000000ull,
+ 698000000000000000ull,
+ 699000000000000000ull,
+
+ 660000000000000000ull,
+ 661000000000000000ull,
+ 662000000000000000ull,
+ 663000000000000000ull,
+ 664000000000000000ull,
+ 665000000000000000ull,
+ 666000000000000000ull,
+ 667000000000000000ull,
+ 668000000000000000ull,
+ 669000000000000000ull,
+ 686000000000000000ull,
+ 687000000000000000ull,
+ 866000000000000000ull,
+ 867000000000000000ull,
+ 888000000000000000ull,
+ 889000000000000000ull,
+
+ 670000000000000000ull,
+ 671000000000000000ull,
+ 672000000000000000ull,
+ 673000000000000000ull,
+ 674000000000000000ull,
+ 675000000000000000ull,
+ 676000000000000000ull,
+ 677000000000000000ull,
+ 678000000000000000ull,
+ 679000000000000000ull,
+ 696000000000000000ull,
+ 697000000000000000ull,
+ 876000000000000000ull,
+ 877000000000000000ull,
+ 898000000000000000ull,
+ 899000000000000000ull,
+
+ 700000000000000000ull,
+ 701000000000000000ull,
+ 702000000000000000ull,
+ 703000000000000000ull,
+ 704000000000000000ull,
+ 705000000000000000ull,
+ 706000000000000000ull,
+ 707000000000000000ull,
+ 708000000000000000ull,
+ 709000000000000000ull,
+ 780000000000000000ull,
+ 781000000000000000ull,
+ 906000000000000000ull,
+ 907000000000000000ull,
+ 986000000000000000ull,
+ 987000000000000000ull,
+
+ 710000000000000000ull,
+ 711000000000000000ull,
+ 712000000000000000ull,
+ 713000000000000000ull,
+ 714000000000000000ull,
+ 715000000000000000ull,
+ 716000000000000000ull,
+ 717000000000000000ull,
+ 718000000000000000ull,
+ 719000000000000000ull,
+ 790000000000000000ull,
+ 791000000000000000ull,
+ 916000000000000000ull,
+ 917000000000000000ull,
+ 996000000000000000ull,
+ 997000000000000000ull,
+
+ 720000000000000000ull,
+ 721000000000000000ull,
+ 722000000000000000ull,
+ 723000000000000000ull,
+ 724000000000000000ull,
+ 725000000000000000ull,
+ 726000000000000000ull,
+ 727000000000000000ull,
+ 728000000000000000ull,
+ 729000000000000000ull,
+ 782000000000000000ull,
+ 783000000000000000ull,
+ 926000000000000000ull,
+ 927000000000000000ull,
+ 968000000000000000ull,
+ 969000000000000000ull,
+
+ 730000000000000000ull,
+ 731000000000000000ull,
+ 732000000000000000ull,
+ 733000000000000000ull,
+ 734000000000000000ull,
+ 735000000000000000ull,
+ 736000000000000000ull,
+ 737000000000000000ull,
+ 738000000000000000ull,
+ 739000000000000000ull,
+ 792000000000000000ull,
+ 793000000000000000ull,
+ 936000000000000000ull,
+ 937000000000000000ull,
+ 978000000000000000ull,
+ 979000000000000000ull,
+
+ 740000000000000000ull,
+ 741000000000000000ull,
+ 742000000000000000ull,
+ 743000000000000000ull,
+ 744000000000000000ull,
+ 745000000000000000ull,
+ 746000000000000000ull,
+ 747000000000000000ull,
+ 748000000000000000ull,
+ 749000000000000000ull,
+ 784000000000000000ull,
+ 785000000000000000ull,
+ 946000000000000000ull,
+ 947000000000000000ull,
+ 788000000000000000ull,
+ 789000000000000000ull,
+
+ 750000000000000000ull,
+ 751000000000000000ull,
+ 752000000000000000ull,
+ 753000000000000000ull,
+ 754000000000000000ull,
+ 755000000000000000ull,
+ 756000000000000000ull,
+ 757000000000000000ull,
+ 758000000000000000ull,
+ 759000000000000000ull,
+ 794000000000000000ull,
+ 795000000000000000ull,
+ 956000000000000000ull,
+ 957000000000000000ull,
+ 798000000000000000ull,
+ 799000000000000000ull,
+
+ 760000000000000000ull,
+ 761000000000000000ull,
+ 762000000000000000ull,
+ 763000000000000000ull,
+ 764000000000000000ull,
+ 765000000000000000ull,
+ 766000000000000000ull,
+ 767000000000000000ull,
+ 768000000000000000ull,
+ 769000000000000000ull,
+ 786000000000000000ull,
+ 787000000000000000ull,
+ 966000000000000000ull,
+ 967000000000000000ull,
+ 988000000000000000ull,
+ 989000000000000000ull,
+
+ 770000000000000000ull,
+ 771000000000000000ull,
+ 772000000000000000ull,
+ 773000000000000000ull,
+ 774000000000000000ull,
+ 775000000000000000ull,
+ 776000000000000000ull,
+ 777000000000000000ull,
+ 778000000000000000ull,
+ 779000000000000000ull,
+ 796000000000000000ull,
+ 797000000000000000ull,
+ 976000000000000000ull,
+ 977000000000000000ull,
+ 998000000000000000ull,
+ 999000000000000000ull
+};
+
+static const UINT64 b2d[] = {
+ 0x000ull,
+ 0x001ull,
+ 0x002ull,
+ 0x003ull,
+ 0x004ull,
+ 0x005ull,
+ 0x006ull,
+ 0x007ull,
+ 0x008ull,
+ 0x009ull,
+
+ 0x010ull,
+ 0x011ull,
+ 0x012ull,
+ 0x013ull,
+ 0x014ull,
+ 0x015ull,
+ 0x016ull,
+ 0x017ull,
+ 0x018ull,
+ 0x019ull,
+
+ 0x020ull,
+ 0x021ull,
+ 0x022ull,
+ 0x023ull,
+ 0x024ull,
+ 0x025ull,
+ 0x026ull,
+ 0x027ull,
+ 0x028ull,
+ 0x029ull,
+
+ 0x030ull,
+ 0x031ull,
+ 0x032ull,
+ 0x033ull,
+ 0x034ull,
+ 0x035ull,
+ 0x036ull,
+ 0x037ull,
+ 0x038ull,
+ 0x039ull,
+
+ 0x040ull,
+ 0x041ull,
+ 0x042ull,
+ 0x043ull,
+ 0x044ull,
+ 0x045ull,
+ 0x046ull,
+ 0x047ull,
+ 0x048ull,
+ 0x049ull,
+
+ 0x050ull,
+ 0x051ull,
+ 0x052ull,
+ 0x053ull,
+ 0x054ull,
+ 0x055ull,
+ 0x056ull,
+ 0x057ull,
+ 0x058ull,
+ 0x059ull,
+
+ 0x060ull,
+ 0x061ull,
+ 0x062ull,
+ 0x063ull,
+ 0x064ull,
+ 0x065ull,
+ 0x066ull,
+ 0x067ull,
+ 0x068ull,
+ 0x069ull,
+
+ 0x070ull,
+ 0x071ull,
+ 0x072ull,
+ 0x073ull,
+ 0x074ull,
+ 0x075ull,
+ 0x076ull,
+ 0x077ull,
+ 0x078ull,
+ 0x079ull,
+
+ 0x00aull,
+ 0x00bull,
+ 0x02aull,
+ 0x02bull,
+ 0x04aull,
+ 0x04bull,
+ 0x06aull,
+ 0x06bull,
+ 0x04eull,
+ 0x04full,
+
+ 0x01aull,
+ 0x01bull,
+ 0x03aull,
+ 0x03bull,
+ 0x05aull,
+ 0x05bull,
+ 0x07aull,
+ 0x07bull,
+ 0x05eull,
+ 0x05full,
+
+ 0x080ull,
+ 0x081ull,
+ 0x082ull,
+ 0x083ull,
+ 0x084ull,
+ 0x085ull,
+ 0x086ull,
+ 0x087ull,
+ 0x088ull,
+ 0x089ull,
+
+ 0x090ull,
+ 0x091ull,
+ 0x092ull,
+ 0x093ull,
+ 0x094ull,
+ 0x095ull,
+ 0x096ull,
+ 0x097ull,
+ 0x098ull,
+ 0x099ull,
+
+ 0x0a0ull,
+ 0x0a1ull,
+ 0x0a2ull,
+ 0x0a3ull,
+ 0x0a4ull,
+ 0x0a5ull,
+ 0x0a6ull,
+ 0x0a7ull,
+ 0x0a8ull,
+ 0x0a9ull,
+
+ 0x0b0ull,
+ 0x0b1ull,
+ 0x0b2ull,
+ 0x0b3ull,
+ 0x0b4ull,
+ 0x0b5ull,
+ 0x0b6ull,
+ 0x0b7ull,
+ 0x0b8ull,
+ 0x0b9ull,
+
+ 0x0c0ull,
+ 0x0c1ull,
+ 0x0c2ull,
+ 0x0c3ull,
+ 0x0c4ull,
+ 0x0c5ull,
+ 0x0c6ull,
+ 0x0c7ull,
+ 0x0c8ull,
+ 0x0c9ull,
+
+ 0x0d0ull,
+ 0x0d1ull,
+ 0x0d2ull,
+ 0x0d3ull,
+ 0x0d4ull,
+ 0x0d5ull,
+ 0x0d6ull,
+ 0x0d7ull,
+ 0x0d8ull,
+ 0x0d9ull,
+
+ 0x0e0ull,
+ 0x0e1ull,
+ 0x0e2ull,
+ 0x0e3ull,
+ 0x0e4ull,
+ 0x0e5ull,
+ 0x0e6ull,
+ 0x0e7ull,
+ 0x0e8ull,
+ 0x0e9ull,
+
+ 0x0f0ull,
+ 0x0f1ull,
+ 0x0f2ull,
+ 0x0f3ull,
+ 0x0f4ull,
+ 0x0f5ull,
+ 0x0f6ull,
+ 0x0f7ull,
+ 0x0f8ull,
+ 0x0f9ull,
+
+ 0x08aull,
+ 0x08bull,
+ 0x0aaull,
+ 0x0abull,
+ 0x0caull,
+ 0x0cbull,
+ 0x0eaull,
+ 0x0ebull,
+ 0x0ceull,
+ 0x0cfull,
+
+ 0x09aull,
+ 0x09bull,
+ 0x0baull,
+ 0x0bbull,
+ 0x0daull,
+ 0x0dbull,
+ 0x0faull,
+ 0x0fbull,
+ 0x0deull,
+ 0x0dfull,
+
+ 0x100ull,
+ 0x101ull,
+ 0x102ull,
+ 0x103ull,
+ 0x104ull,
+ 0x105ull,
+ 0x106ull,
+ 0x107ull,
+ 0x108ull,
+ 0x109ull,
+
+ 0x110ull,
+ 0x111ull,
+ 0x112ull,
+ 0x113ull,
+ 0x114ull,
+ 0x115ull,
+ 0x116ull,
+ 0x117ull,
+ 0x118ull,
+ 0x119ull,
+
+ 0x120ull,
+ 0x121ull,
+ 0x122ull,
+ 0x123ull,
+ 0x124ull,
+ 0x125ull,
+ 0x126ull,
+ 0x127ull,
+ 0x128ull,
+ 0x129ull,
+
+ 0x130ull,
+ 0x131ull,
+ 0x132ull,
+ 0x133ull,
+ 0x134ull,
+ 0x135ull,
+ 0x136ull,
+ 0x137ull,
+ 0x138ull,
+ 0x139ull,
+
+ 0x140ull,
+ 0x141ull,
+ 0x142ull,
+ 0x143ull,
+ 0x144ull,
+ 0x145ull,
+ 0x146ull,
+ 0x147ull,
+ 0x148ull,
+ 0x149ull,
+
+ 0x150ull,
+ 0x151ull,
+ 0x152ull,
+ 0x153ull,
+ 0x154ull,
+ 0x155ull,
+ 0x156ull,
+ 0x157ull,
+ 0x158ull,
+ 0x159ull,
+
+ 0x160ull,
+ 0x161ull,
+ 0x162ull,
+ 0x163ull,
+ 0x164ull,
+ 0x165ull,
+ 0x166ull,
+ 0x167ull,
+ 0x168ull,
+ 0x169ull,
+
+ 0x170ull,
+ 0x171ull,
+ 0x172ull,
+ 0x173ull,
+ 0x174ull,
+ 0x175ull,
+ 0x176ull,
+ 0x177ull,
+ 0x178ull,
+ 0x179ull,
+
+ 0x10aull,
+ 0x10bull,
+ 0x12aull,
+ 0x12bull,
+ 0x14aull,
+ 0x14bull,
+ 0x16aull,
+ 0x16bull,
+ 0x14eull,
+ 0x14full,
+
+ 0x11aull,
+ 0x11bull,
+ 0x13aull,
+ 0x13bull,
+ 0x15aull,
+ 0x15bull,
+ 0x17aull,
+ 0x17bull,
+ 0x15eull,
+ 0x15full,
+
+ 0x180ull,
+ 0x181ull,
+ 0x182ull,
+ 0x183ull,
+ 0x184ull,
+ 0x185ull,
+ 0x186ull,
+ 0x187ull,
+ 0x188ull,
+ 0x189ull,
+
+ 0x190ull,
+ 0x191ull,
+ 0x192ull,
+ 0x193ull,
+ 0x194ull,
+ 0x195ull,
+ 0x196ull,
+ 0x197ull,
+ 0x198ull,
+ 0x199ull,
+
+ 0x1a0ull,
+ 0x1a1ull,
+ 0x1a2ull,
+ 0x1a3ull,
+ 0x1a4ull,
+ 0x1a5ull,
+ 0x1a6ull,
+ 0x1a7ull,
+ 0x1a8ull,
+ 0x1a9ull,
+
+ 0x1b0ull,
+ 0x1b1ull,
+ 0x1b2ull,
+ 0x1b3ull,
+ 0x1b4ull,
+ 0x1b5ull,
+ 0x1b6ull,
+ 0x1b7ull,
+ 0x1b8ull,
+ 0x1b9ull,
+
+ 0x1c0ull,
+ 0x1c1ull,
+ 0x1c2ull,
+ 0x1c3ull,
+ 0x1c4ull,
+ 0x1c5ull,
+ 0x1c6ull,
+ 0x1c7ull,
+ 0x1c8ull,
+ 0x1c9ull,
+
+ 0x1d0ull,
+ 0x1d1ull,
+ 0x1d2ull,
+ 0x1d3ull,
+ 0x1d4ull,
+ 0x1d5ull,
+ 0x1d6ull,
+ 0x1d7ull,
+ 0x1d8ull,
+ 0x1d9ull,
+
+ 0x1e0ull,
+ 0x1e1ull,
+ 0x1e2ull,
+ 0x1e3ull,
+ 0x1e4ull,
+ 0x1e5ull,
+ 0x1e6ull,
+ 0x1e7ull,
+ 0x1e8ull,
+ 0x1e9ull,
+
+ 0x1f0ull,
+ 0x1f1ull,
+ 0x1f2ull,
+ 0x1f3ull,
+ 0x1f4ull,
+ 0x1f5ull,
+ 0x1f6ull,
+ 0x1f7ull,
+ 0x1f8ull,
+ 0x1f9ull,
+
+ 0x18aull,
+ 0x18bull,
+ 0x1aaull,
+ 0x1abull,
+ 0x1caull,
+ 0x1cbull,
+ 0x1eaull,
+ 0x1ebull,
+ 0x1ceull,
+ 0x1cfull,
+
+ 0x19aull,
+ 0x19bull,
+ 0x1baull,
+ 0x1bbull,
+ 0x1daull,
+ 0x1dbull,
+ 0x1faull,
+ 0x1fbull,
+ 0x1deull,
+ 0x1dfull,
+
+ 0x200ull,
+ 0x201ull,
+ 0x202ull,
+ 0x203ull,
+ 0x204ull,
+ 0x205ull,
+ 0x206ull,
+ 0x207ull,
+ 0x208ull,
+ 0x209ull,
+
+ 0x210ull,
+ 0x211ull,
+ 0x212ull,
+ 0x213ull,
+ 0x214ull,
+ 0x215ull,
+ 0x216ull,
+ 0x217ull,
+ 0x218ull,
+ 0x219ull,
+
+ 0x220ull,
+ 0x221ull,
+ 0x222ull,
+ 0x223ull,
+ 0x224ull,
+ 0x225ull,
+ 0x226ull,
+ 0x227ull,
+ 0x228ull,
+ 0x229ull,
+
+ 0x230ull,
+ 0x231ull,
+ 0x232ull,
+ 0x233ull,
+ 0x234ull,
+ 0x235ull,
+ 0x236ull,
+ 0x237ull,
+ 0x238ull,
+ 0x239ull,
+
+ 0x240ull,
+ 0x241ull,
+ 0x242ull,
+ 0x243ull,
+ 0x244ull,
+ 0x245ull,
+ 0x246ull,
+ 0x247ull,
+ 0x248ull,
+ 0x249ull,
+
+ 0x250ull,
+ 0x251ull,
+ 0x252ull,
+ 0x253ull,
+ 0x254ull,
+ 0x255ull,
+ 0x256ull,
+ 0x257ull,
+ 0x258ull,
+ 0x259ull,
+
+ 0x260ull,
+ 0x261ull,
+ 0x262ull,
+ 0x263ull,
+ 0x264ull,
+ 0x265ull,
+ 0x266ull,
+ 0x267ull,
+ 0x268ull,
+ 0x269ull,
+
+ 0x270ull,
+ 0x271ull,
+ 0x272ull,
+ 0x273ull,
+ 0x274ull,
+ 0x275ull,
+ 0x276ull,
+ 0x277ull,
+ 0x278ull,
+ 0x279ull,
+
+ 0x20aull,
+ 0x20bull,
+ 0x22aull,
+ 0x22bull,
+ 0x24aull,
+ 0x24bull,
+ 0x26aull,
+ 0x26bull,
+ 0x24eull,
+ 0x24full,
+
+ 0x21aull,
+ 0x21bull,
+ 0x23aull,
+ 0x23bull,
+ 0x25aull,
+ 0x25bull,
+ 0x27aull,
+ 0x27bull,
+ 0x25eull,
+ 0x25full,
+
+ 0x280ull,
+ 0x281ull,
+ 0x282ull,
+ 0x283ull,
+ 0x284ull,
+ 0x285ull,
+ 0x286ull,
+ 0x287ull,
+ 0x288ull,
+ 0x289ull,
+
+ 0x290ull,
+ 0x291ull,
+ 0x292ull,
+ 0x293ull,
+ 0x294ull,
+ 0x295ull,
+ 0x296ull,
+ 0x297ull,
+ 0x298ull,
+ 0x299ull,
+
+ 0x2a0ull,
+ 0x2a1ull,
+ 0x2a2ull,
+ 0x2a3ull,
+ 0x2a4ull,
+ 0x2a5ull,
+ 0x2a6ull,
+ 0x2a7ull,
+ 0x2a8ull,
+ 0x2a9ull,
+
+ 0x2b0ull,
+ 0x2b1ull,
+ 0x2b2ull,
+ 0x2b3ull,
+ 0x2b4ull,
+ 0x2b5ull,
+ 0x2b6ull,
+ 0x2b7ull,
+ 0x2b8ull,
+ 0x2b9ull,
+
+ 0x2c0ull,
+ 0x2c1ull,
+ 0x2c2ull,
+ 0x2c3ull,
+ 0x2c4ull,
+ 0x2c5ull,
+ 0x2c6ull,
+ 0x2c7ull,
+ 0x2c8ull,
+ 0x2c9ull,
+
+ 0x2d0ull,
+ 0x2d1ull,
+ 0x2d2ull,
+ 0x2d3ull,
+ 0x2d4ull,
+ 0x2d5ull,
+ 0x2d6ull,
+ 0x2d7ull,
+ 0x2d8ull,
+ 0x2d9ull,
+
+ 0x2e0ull,
+ 0x2e1ull,
+ 0x2e2ull,
+ 0x2e3ull,
+ 0x2e4ull,
+ 0x2e5ull,
+ 0x2e6ull,
+ 0x2e7ull,
+ 0x2e8ull,
+ 0x2e9ull,
+
+ 0x2f0ull,
+ 0x2f1ull,
+ 0x2f2ull,
+ 0x2f3ull,
+ 0x2f4ull,
+ 0x2f5ull,
+ 0x2f6ull,
+ 0x2f7ull,
+ 0x2f8ull,
+ 0x2f9ull,
+
+ 0x28aull,
+ 0x28bull,
+ 0x2aaull,
+ 0x2abull,
+ 0x2caull,
+ 0x2cbull,
+ 0x2eaull,
+ 0x2ebull,
+ 0x2ceull,
+ 0x2cfull,
+
+ 0x29aull,
+ 0x29bull,
+ 0x2baull,
+ 0x2bbull,
+ 0x2daull,
+ 0x2dbull,
+ 0x2faull,
+ 0x2fbull,
+ 0x2deull,
+ 0x2dfull,
+
+ 0x300ull,
+ 0x301ull,
+ 0x302ull,
+ 0x303ull,
+ 0x304ull,
+ 0x305ull,
+ 0x306ull,
+ 0x307ull,
+ 0x308ull,
+ 0x309ull,
+
+ 0x310ull,
+ 0x311ull,
+ 0x312ull,
+ 0x313ull,
+ 0x314ull,
+ 0x315ull,
+ 0x316ull,
+ 0x317ull,
+ 0x318ull,
+ 0x319ull,
+
+ 0x320ull,
+ 0x321ull,
+ 0x322ull,
+ 0x323ull,
+ 0x324ull,
+ 0x325ull,
+ 0x326ull,
+ 0x327ull,
+ 0x328ull,
+ 0x329ull,
+
+ 0x330ull,
+ 0x331ull,
+ 0x332ull,
+ 0x333ull,
+ 0x334ull,
+ 0x335ull,
+ 0x336ull,
+ 0x337ull,
+ 0x338ull,
+ 0x339ull,
+
+ 0x340ull,
+ 0x341ull,
+ 0x342ull,
+ 0x343ull,
+ 0x344ull,
+ 0x345ull,
+ 0x346ull,
+ 0x347ull,
+ 0x348ull,
+ 0x349ull,
+
+ 0x350ull,
+ 0x351ull,
+ 0x352ull,
+ 0x353ull,
+ 0x354ull,
+ 0x355ull,
+ 0x356ull,
+ 0x357ull,
+ 0x358ull,
+ 0x359ull,
+
+ 0x360ull,
+ 0x361ull,
+ 0x362ull,
+ 0x363ull,
+ 0x364ull,
+ 0x365ull,
+ 0x366ull,
+ 0x367ull,
+ 0x368ull,
+ 0x369ull,
+
+ 0x370ull,
+ 0x371ull,
+ 0x372ull,
+ 0x373ull,
+ 0x374ull,
+ 0x375ull,
+ 0x376ull,
+ 0x377ull,
+ 0x378ull,
+ 0x379ull,
+
+ 0x30aull,
+ 0x30bull,
+ 0x32aull,
+ 0x32bull,
+ 0x34aull,
+ 0x34bull,
+ 0x36aull,
+ 0x36bull,
+ 0x34eull,
+ 0x34full,
+
+ 0x31aull,
+ 0x31bull,
+ 0x33aull,
+ 0x33bull,
+ 0x35aull,
+ 0x35bull,
+ 0x37aull,
+ 0x37bull,
+ 0x35eull,
+ 0x35full,
+
+ 0x380ull,
+ 0x381ull,
+ 0x382ull,
+ 0x383ull,
+ 0x384ull,
+ 0x385ull,
+ 0x386ull,
+ 0x387ull,
+ 0x388ull,
+ 0x389ull,
+
+ 0x390ull,
+ 0x391ull,
+ 0x392ull,
+ 0x393ull,
+ 0x394ull,
+ 0x395ull,
+ 0x396ull,
+ 0x397ull,
+ 0x398ull,
+ 0x399ull,
+
+ 0x3a0ull,
+ 0x3a1ull,
+ 0x3a2ull,
+ 0x3a3ull,
+ 0x3a4ull,
+ 0x3a5ull,
+ 0x3a6ull,
+ 0x3a7ull,
+ 0x3a8ull,
+ 0x3a9ull,
+
+ 0x3b0ull,
+ 0x3b1ull,
+ 0x3b2ull,
+ 0x3b3ull,
+ 0x3b4ull,
+ 0x3b5ull,
+ 0x3b6ull,
+ 0x3b7ull,
+ 0x3b8ull,
+ 0x3b9ull,
+
+ 0x3c0ull,
+ 0x3c1ull,
+ 0x3c2ull,
+ 0x3c3ull,
+ 0x3c4ull,
+ 0x3c5ull,
+ 0x3c6ull,
+ 0x3c7ull,
+ 0x3c8ull,
+ 0x3c9ull,
+
+ 0x3d0ull,
+ 0x3d1ull,
+ 0x3d2ull,
+ 0x3d3ull,
+ 0x3d4ull,
+ 0x3d5ull,
+ 0x3d6ull,
+ 0x3d7ull,
+ 0x3d8ull,
+ 0x3d9ull,
+
+ 0x3e0ull,
+ 0x3e1ull,
+ 0x3e2ull,
+ 0x3e3ull,
+ 0x3e4ull,
+ 0x3e5ull,
+ 0x3e6ull,
+ 0x3e7ull,
+ 0x3e8ull,
+ 0x3e9ull,
+
+ 0x3f0ull,
+ 0x3f1ull,
+ 0x3f2ull,
+ 0x3f3ull,
+ 0x3f4ull,
+ 0x3f5ull,
+ 0x3f6ull,
+ 0x3f7ull,
+ 0x3f8ull,
+ 0x3f9ull,
+
+ 0x38aull,
+ 0x38bull,
+ 0x3aaull,
+ 0x3abull,
+ 0x3caull,
+ 0x3cbull,
+ 0x3eaull,
+ 0x3ebull,
+ 0x3ceull,
+ 0x3cfull,
+
+ 0x39aull,
+ 0x39bull,
+ 0x3baull,
+ 0x3bbull,
+ 0x3daull,
+ 0x3dbull,
+ 0x3faull,
+ 0x3fbull,
+ 0x3deull,
+ 0x3dfull,
+
+ 0x00cull,
+ 0x00dull,
+ 0x10cull,
+ 0x10dull,
+ 0x20cull,
+ 0x20dull,
+ 0x30cull,
+ 0x30dull,
+ 0x02eull,
+ 0x02full,
+
+ 0x01cull,
+ 0x01dull,
+ 0x11cull,
+ 0x11dull,
+ 0x21cull,
+ 0x21dull,
+ 0x31cull,
+ 0x31dull,
+ 0x03eull,
+ 0x03full,
+
+ 0x02cull,
+ 0x02dull,
+ 0x12cull,
+ 0x12dull,
+ 0x22cull,
+ 0x22dull,
+ 0x32cull,
+ 0x32dull,
+ 0x12eull,
+ 0x12full,
+
+ 0x03cull,
+ 0x03dull,
+ 0x13cull,
+ 0x13dull,
+ 0x23cull,
+ 0x23dull,
+ 0x33cull,
+ 0x33dull,
+ 0x13eull,
+ 0x13full,
+
+ 0x04cull,
+ 0x04dull,
+ 0x14cull,
+ 0x14dull,
+ 0x24cull,
+ 0x24dull,
+ 0x34cull,
+ 0x34dull,
+ 0x22eull,
+ 0x22full,
+
+ 0x05cull,
+ 0x05dull,
+ 0x15cull,
+ 0x15dull,
+ 0x25cull,
+ 0x25dull,
+ 0x35cull,
+ 0x35dull,
+ 0x23eull,
+ 0x23full,
+
+ 0x06cull,
+ 0x06dull,
+ 0x16cull,
+ 0x16dull,
+ 0x26cull,
+ 0x26dull,
+ 0x36cull,
+ 0x36dull,
+ 0x32eull,
+ 0x32full,
+
+ 0x07cull,
+ 0x07dull,
+ 0x17cull,
+ 0x17dull,
+ 0x27cull,
+ 0x27dull,
+ 0x37cull,
+ 0x37dull,
+ 0x33eull,
+ 0x33full,
+
+ 0x00eull,
+ 0x00full,
+ 0x10eull,
+ 0x10full,
+ 0x20eull,
+ 0x20full,
+ 0x30eull,
+ 0x30full,
+ 0x06eull,
+ 0x06full,
+
+ 0x01eull,
+ 0x01full,
+ 0x11eull,
+ 0x11full,
+ 0x21eull,
+ 0x21full,
+ 0x31eull,
+ 0x31full,
+ 0x07eull,
+ 0x07full,
+
+ 0x08cull,
+ 0x08dull,
+ 0x18cull,
+ 0x18dull,
+ 0x28cull,
+ 0x28dull,
+ 0x38cull,
+ 0x38dull,
+ 0x0aeull,
+ 0x0afull,
+
+ 0x09cull,
+ 0x09dull,
+ 0x19cull,
+ 0x19dull,
+ 0x29cull,
+ 0x29dull,
+ 0x39cull,
+ 0x39dull,
+ 0x0beull,
+ 0x0bfull,
+
+ 0x0acull,
+ 0x0adull,
+ 0x1acull,
+ 0x1adull,
+ 0x2acull,
+ 0x2adull,
+ 0x3acull,
+ 0x3adull,
+ 0x1aeull,
+ 0x1afull,
+
+ 0x0bcull,
+ 0x0bdull,
+ 0x1bcull,
+ 0x1bdull,
+ 0x2bcull,
+ 0x2bdull,
+ 0x3bcull,
+ 0x3bdull,
+ 0x1beull,
+ 0x1bfull,
+
+ 0x0ccull,
+ 0x0cdull,
+ 0x1ccull,
+ 0x1cdull,
+ 0x2ccull,
+ 0x2cdull,
+ 0x3ccull,
+ 0x3cdull,
+ 0x2aeull,
+ 0x2afull,
+
+ 0x0dcull,
+ 0x0ddull,
+ 0x1dcull,
+ 0x1ddull,
+ 0x2dcull,
+ 0x2ddull,
+ 0x3dcull,
+ 0x3ddull,
+ 0x2beull,
+ 0x2bfull,
+
+ 0x0ecull,
+ 0x0edull,
+ 0x1ecull,
+ 0x1edull,
+ 0x2ecull,
+ 0x2edull,
+ 0x3ecull,
+ 0x3edull,
+ 0x3aeull,
+ 0x3afull,
+
+ 0x0fcull,
+ 0x0fdull,
+ 0x1fcull,
+ 0x1fdull,
+ 0x2fcull,
+ 0x2fdull,
+ 0x3fcull,
+ 0x3fdull,
+ 0x3beull,
+ 0x3bfull,
+
+ 0x08eull,
+ 0x08full,
+ 0x18eull,
+ 0x18full,
+ 0x28eull,
+ 0x28full,
+ 0x38eull,
+ 0x38full,
+ 0x0eeull,
+ 0x0efull,
+
+ 0x09eull,
+ 0x09full,
+ 0x19eull,
+ 0x19full,
+ 0x29eull,
+ 0x29full,
+ 0x39eull,
+ 0x39full,
+ 0x0feull,
+ 0x0ffull
+};
+
+static const UINT64 b2d2[] = {
+ 0x000ull << 10,
+ 0x001ull << 10,
+ 0x002ull << 10,
+ 0x003ull << 10,
+ 0x004ull << 10,
+ 0x005ull << 10,
+ 0x006ull << 10,
+ 0x007ull << 10,
+ 0x008ull << 10,
+ 0x009ull << 10,
+
+ 0x010ull << 10,
+ 0x011ull << 10,
+ 0x012ull << 10,
+ 0x013ull << 10,
+ 0x014ull << 10,
+ 0x015ull << 10,
+ 0x016ull << 10,
+ 0x017ull << 10,
+ 0x018ull << 10,
+ 0x019ull << 10,
+
+ 0x020ull << 10,
+ 0x021ull << 10,
+ 0x022ull << 10,
+ 0x023ull << 10,
+ 0x024ull << 10,
+ 0x025ull << 10,
+ 0x026ull << 10,
+ 0x027ull << 10,
+ 0x028ull << 10,
+ 0x029ull << 10,
+
+ 0x030ull << 10,
+ 0x031ull << 10,
+ 0x032ull << 10,
+ 0x033ull << 10,
+ 0x034ull << 10,
+ 0x035ull << 10,
+ 0x036ull << 10,
+ 0x037ull << 10,
+ 0x038ull << 10,
+ 0x039ull << 10,
+
+ 0x040ull << 10,
+ 0x041ull << 10,
+ 0x042ull << 10,
+ 0x043ull << 10,
+ 0x044ull << 10,
+ 0x045ull << 10,
+ 0x046ull << 10,
+ 0x047ull << 10,
+ 0x048ull << 10,
+ 0x049ull << 10,
+
+ 0x050ull << 10,
+ 0x051ull << 10,
+ 0x052ull << 10,
+ 0x053ull << 10,
+ 0x054ull << 10,
+ 0x055ull << 10,
+ 0x056ull << 10,
+ 0x057ull << 10,
+ 0x058ull << 10,
+ 0x059ull << 10,
+
+ 0x060ull << 10,
+ 0x061ull << 10,
+ 0x062ull << 10,
+ 0x063ull << 10,
+ 0x064ull << 10,
+ 0x065ull << 10,
+ 0x066ull << 10,
+ 0x067ull << 10,
+ 0x068ull << 10,
+ 0x069ull << 10,
+
+ 0x070ull << 10,
+ 0x071ull << 10,
+ 0x072ull << 10,
+ 0x073ull << 10,
+ 0x074ull << 10,
+ 0x075ull << 10,
+ 0x076ull << 10,
+ 0x077ull << 10,
+ 0x078ull << 10,
+ 0x079ull << 10,
+
+ 0x00aull << 10,
+ 0x00bull << 10,
+ 0x02aull << 10,
+ 0x02bull << 10,
+ 0x04aull << 10,
+ 0x04bull << 10,
+ 0x06aull << 10,
+ 0x06bull << 10,
+ 0x04eull << 10,
+ 0x04full << 10,
+
+ 0x01aull << 10,
+ 0x01bull << 10,
+ 0x03aull << 10,
+ 0x03bull << 10,
+ 0x05aull << 10,
+ 0x05bull << 10,
+ 0x07aull << 10,
+ 0x07bull << 10,
+ 0x05eull << 10,
+ 0x05full << 10,
+
+ 0x080ull << 10,
+ 0x081ull << 10,
+ 0x082ull << 10,
+ 0x083ull << 10,
+ 0x084ull << 10,
+ 0x085ull << 10,
+ 0x086ull << 10,
+ 0x087ull << 10,
+ 0x088ull << 10,
+ 0x089ull << 10,
+
+ 0x090ull << 10,
+ 0x091ull << 10,
+ 0x092ull << 10,
+ 0x093ull << 10,
+ 0x094ull << 10,
+ 0x095ull << 10,
+ 0x096ull << 10,
+ 0x097ull << 10,
+ 0x098ull << 10,
+ 0x099ull << 10,
+
+ 0x0a0ull << 10,
+ 0x0a1ull << 10,
+ 0x0a2ull << 10,
+ 0x0a3ull << 10,
+ 0x0a4ull << 10,
+ 0x0a5ull << 10,
+ 0x0a6ull << 10,
+ 0x0a7ull << 10,
+ 0x0a8ull << 10,
+ 0x0a9ull << 10,
+
+ 0x0b0ull << 10,
+ 0x0b1ull << 10,
+ 0x0b2ull << 10,
+ 0x0b3ull << 10,
+ 0x0b4ull << 10,
+ 0x0b5ull << 10,
+ 0x0b6ull << 10,
+ 0x0b7ull << 10,
+ 0x0b8ull << 10,
+ 0x0b9ull << 10,
+
+ 0x0c0ull << 10,
+ 0x0c1ull << 10,
+ 0x0c2ull << 10,
+ 0x0c3ull << 10,
+ 0x0c4ull << 10,
+ 0x0c5ull << 10,
+ 0x0c6ull << 10,
+ 0x0c7ull << 10,
+ 0x0c8ull << 10,
+ 0x0c9ull << 10,
+
+ 0x0d0ull << 10,
+ 0x0d1ull << 10,
+ 0x0d2ull << 10,
+ 0x0d3ull << 10,
+ 0x0d4ull << 10,
+ 0x0d5ull << 10,
+ 0x0d6ull << 10,
+ 0x0d7ull << 10,
+ 0x0d8ull << 10,
+ 0x0d9ull << 10,
+
+ 0x0e0ull << 10,
+ 0x0e1ull << 10,
+ 0x0e2ull << 10,
+ 0x0e3ull << 10,
+ 0x0e4ull << 10,
+ 0x0e5ull << 10,
+ 0x0e6ull << 10,
+ 0x0e7ull << 10,
+ 0x0e8ull << 10,
+ 0x0e9ull << 10,
+
+ 0x0f0ull << 10,
+ 0x0f1ull << 10,
+ 0x0f2ull << 10,
+ 0x0f3ull << 10,
+ 0x0f4ull << 10,
+ 0x0f5ull << 10,
+ 0x0f6ull << 10,
+ 0x0f7ull << 10,
+ 0x0f8ull << 10,
+ 0x0f9ull << 10,
+
+ 0x08aull << 10,
+ 0x08bull << 10,
+ 0x0aaull << 10,
+ 0x0abull << 10,
+ 0x0caull << 10,
+ 0x0cbull << 10,
+ 0x0eaull << 10,
+ 0x0ebull << 10,
+ 0x0ceull << 10,
+ 0x0cfull << 10,
+
+ 0x09aull << 10,
+ 0x09bull << 10,
+ 0x0baull << 10,
+ 0x0bbull << 10,
+ 0x0daull << 10,
+ 0x0dbull << 10,
+ 0x0faull << 10,
+ 0x0fbull << 10,
+ 0x0deull << 10,
+ 0x0dfull << 10,
+
+ 0x100ull << 10,
+ 0x101ull << 10,
+ 0x102ull << 10,
+ 0x103ull << 10,
+ 0x104ull << 10,
+ 0x105ull << 10,
+ 0x106ull << 10,
+ 0x107ull << 10,
+ 0x108ull << 10,
+ 0x109ull << 10,
+
+ 0x110ull << 10,
+ 0x111ull << 10,
+ 0x112ull << 10,
+ 0x113ull << 10,
+ 0x114ull << 10,
+ 0x115ull << 10,
+ 0x116ull << 10,
+ 0x117ull << 10,
+ 0x118ull << 10,
+ 0x119ull << 10,
+
+ 0x120ull << 10,
+ 0x121ull << 10,
+ 0x122ull << 10,
+ 0x123ull << 10,
+ 0x124ull << 10,
+ 0x125ull << 10,
+ 0x126ull << 10,
+ 0x127ull << 10,
+ 0x128ull << 10,
+ 0x129ull << 10,
+
+ 0x130ull << 10,
+ 0x131ull << 10,
+ 0x132ull << 10,
+ 0x133ull << 10,
+ 0x134ull << 10,
+ 0x135ull << 10,
+ 0x136ull << 10,
+ 0x137ull << 10,
+ 0x138ull << 10,
+ 0x139ull << 10,
+
+ 0x140ull << 10,
+ 0x141ull << 10,
+ 0x142ull << 10,
+ 0x143ull << 10,
+ 0x144ull << 10,
+ 0x145ull << 10,
+ 0x146ull << 10,
+ 0x147ull << 10,
+ 0x148ull << 10,
+ 0x149ull << 10,
+
+ 0x150ull << 10,
+ 0x151ull << 10,
+ 0x152ull << 10,
+ 0x153ull << 10,
+ 0x154ull << 10,
+ 0x155ull << 10,
+ 0x156ull << 10,
+ 0x157ull << 10,
+ 0x158ull << 10,
+ 0x159ull << 10,
+
+ 0x160ull << 10,
+ 0x161ull << 10,
+ 0x162ull << 10,
+ 0x163ull << 10,
+ 0x164ull << 10,
+ 0x165ull << 10,
+ 0x166ull << 10,
+ 0x167ull << 10,
+ 0x168ull << 10,
+ 0x169ull << 10,
+
+ 0x170ull << 10,
+ 0x171ull << 10,
+ 0x172ull << 10,
+ 0x173ull << 10,
+ 0x174ull << 10,
+ 0x175ull << 10,
+ 0x176ull << 10,
+ 0x177ull << 10,
+ 0x178ull << 10,
+ 0x179ull << 10,
+
+ 0x10aull << 10,
+ 0x10bull << 10,
+ 0x12aull << 10,
+ 0x12bull << 10,
+ 0x14aull << 10,
+ 0x14bull << 10,
+ 0x16aull << 10,
+ 0x16bull << 10,
+ 0x14eull << 10,
+ 0x14full << 10,
+
+ 0x11aull << 10,
+ 0x11bull << 10,
+ 0x13aull << 10,
+ 0x13bull << 10,
+ 0x15aull << 10,
+ 0x15bull << 10,
+ 0x17aull << 10,
+ 0x17bull << 10,
+ 0x15eull << 10,
+ 0x15full << 10,
+
+ 0x180ull << 10,
+ 0x181ull << 10,
+ 0x182ull << 10,
+ 0x183ull << 10,
+ 0x184ull << 10,
+ 0x185ull << 10,
+ 0x186ull << 10,
+ 0x187ull << 10,
+ 0x188ull << 10,
+ 0x189ull << 10,
+
+ 0x190ull << 10,
+ 0x191ull << 10,
+ 0x192ull << 10,
+ 0x193ull << 10,
+ 0x194ull << 10,
+ 0x195ull << 10,
+ 0x196ull << 10,
+ 0x197ull << 10,
+ 0x198ull << 10,
+ 0x199ull << 10,
+
+ 0x1a0ull << 10,
+ 0x1a1ull << 10,
+ 0x1a2ull << 10,
+ 0x1a3ull << 10,
+ 0x1a4ull << 10,
+ 0x1a5ull << 10,
+ 0x1a6ull << 10,
+ 0x1a7ull << 10,
+ 0x1a8ull << 10,
+ 0x1a9ull << 10,
+
+ 0x1b0ull << 10,
+ 0x1b1ull << 10,
+ 0x1b2ull << 10,
+ 0x1b3ull << 10,
+ 0x1b4ull << 10,
+ 0x1b5ull << 10,
+ 0x1b6ull << 10,
+ 0x1b7ull << 10,
+ 0x1b8ull << 10,
+ 0x1b9ull << 10,
+
+ 0x1c0ull << 10,
+ 0x1c1ull << 10,
+ 0x1c2ull << 10,
+ 0x1c3ull << 10,
+ 0x1c4ull << 10,
+ 0x1c5ull << 10,
+ 0x1c6ull << 10,
+ 0x1c7ull << 10,
+ 0x1c8ull << 10,
+ 0x1c9ull << 10,
+
+ 0x1d0ull << 10,
+ 0x1d1ull << 10,
+ 0x1d2ull << 10,
+ 0x1d3ull << 10,
+ 0x1d4ull << 10,
+ 0x1d5ull << 10,
+ 0x1d6ull << 10,
+ 0x1d7ull << 10,
+ 0x1d8ull << 10,
+ 0x1d9ull << 10,
+
+ 0x1e0ull << 10,
+ 0x1e1ull << 10,
+ 0x1e2ull << 10,
+ 0x1e3ull << 10,
+ 0x1e4ull << 10,
+ 0x1e5ull << 10,
+ 0x1e6ull << 10,
+ 0x1e7ull << 10,
+ 0x1e8ull << 10,
+ 0x1e9ull << 10,
+
+ 0x1f0ull << 10,
+ 0x1f1ull << 10,
+ 0x1f2ull << 10,
+ 0x1f3ull << 10,
+ 0x1f4ull << 10,
+ 0x1f5ull << 10,
+ 0x1f6ull << 10,
+ 0x1f7ull << 10,
+ 0x1f8ull << 10,
+ 0x1f9ull << 10,
+
+ 0x18aull << 10,
+ 0x18bull << 10,
+ 0x1aaull << 10,
+ 0x1abull << 10,
+ 0x1caull << 10,
+ 0x1cbull << 10,
+ 0x1eaull << 10,
+ 0x1ebull << 10,
+ 0x1ceull << 10,
+ 0x1cfull << 10,
+
+ 0x19aull << 10,
+ 0x19bull << 10,
+ 0x1baull << 10,
+ 0x1bbull << 10,
+ 0x1daull << 10,
+ 0x1dbull << 10,
+ 0x1faull << 10,
+ 0x1fbull << 10,
+ 0x1deull << 10,
+ 0x1dfull << 10,
+
+ 0x200ull << 10,
+ 0x201ull << 10,
+ 0x202ull << 10,
+ 0x203ull << 10,
+ 0x204ull << 10,
+ 0x205ull << 10,
+ 0x206ull << 10,
+ 0x207ull << 10,
+ 0x208ull << 10,
+ 0x209ull << 10,
+
+ 0x210ull << 10,
+ 0x211ull << 10,
+ 0x212ull << 10,
+ 0x213ull << 10,
+ 0x214ull << 10,
+ 0x215ull << 10,
+ 0x216ull << 10,
+ 0x217ull << 10,
+ 0x218ull << 10,
+ 0x219ull << 10,
+
+ 0x220ull << 10,
+ 0x221ull << 10,
+ 0x222ull << 10,
+ 0x223ull << 10,
+ 0x224ull << 10,
+ 0x225ull << 10,
+ 0x226ull << 10,
+ 0x227ull << 10,
+ 0x228ull << 10,
+ 0x229ull << 10,
+
+ 0x230ull << 10,
+ 0x231ull << 10,
+ 0x232ull << 10,
+ 0x233ull << 10,
+ 0x234ull << 10,
+ 0x235ull << 10,
+ 0x236ull << 10,
+ 0x237ull << 10,
+ 0x238ull << 10,
+ 0x239ull << 10,
+
+ 0x240ull << 10,
+ 0x241ull << 10,
+ 0x242ull << 10,
+ 0x243ull << 10,
+ 0x244ull << 10,
+ 0x245ull << 10,
+ 0x246ull << 10,
+ 0x247ull << 10,
+ 0x248ull << 10,
+ 0x249ull << 10,
+
+ 0x250ull << 10,
+ 0x251ull << 10,
+ 0x252ull << 10,
+ 0x253ull << 10,
+ 0x254ull << 10,
+ 0x255ull << 10,
+ 0x256ull << 10,
+ 0x257ull << 10,
+ 0x258ull << 10,
+ 0x259ull << 10,
+
+ 0x260ull << 10,
+ 0x261ull << 10,
+ 0x262ull << 10,
+ 0x263ull << 10,
+ 0x264ull << 10,
+ 0x265ull << 10,
+ 0x266ull << 10,
+ 0x267ull << 10,
+ 0x268ull << 10,
+ 0x269ull << 10,
+
+ 0x270ull << 10,
+ 0x271ull << 10,
+ 0x272ull << 10,
+ 0x273ull << 10,
+ 0x274ull << 10,
+ 0x275ull << 10,
+ 0x276ull << 10,
+ 0x277ull << 10,
+ 0x278ull << 10,
+ 0x279ull << 10,
+
+ 0x20aull << 10,
+ 0x20bull << 10,
+ 0x22aull << 10,
+ 0x22bull << 10,
+ 0x24aull << 10,
+ 0x24bull << 10,
+ 0x26aull << 10,
+ 0x26bull << 10,
+ 0x24eull << 10,
+ 0x24full << 10,
+
+ 0x21aull << 10,
+ 0x21bull << 10,
+ 0x23aull << 10,
+ 0x23bull << 10,
+ 0x25aull << 10,
+ 0x25bull << 10,
+ 0x27aull << 10,
+ 0x27bull << 10,
+ 0x25eull << 10,
+ 0x25full << 10,
+
+ 0x280ull << 10,
+ 0x281ull << 10,
+ 0x282ull << 10,
+ 0x283ull << 10,
+ 0x284ull << 10,
+ 0x285ull << 10,
+ 0x286ull << 10,
+ 0x287ull << 10,
+ 0x288ull << 10,
+ 0x289ull << 10,
+
+ 0x290ull << 10,
+ 0x291ull << 10,
+ 0x292ull << 10,
+ 0x293ull << 10,
+ 0x294ull << 10,
+ 0x295ull << 10,
+ 0x296ull << 10,
+ 0x297ull << 10,
+ 0x298ull << 10,
+ 0x299ull << 10,
+
+ 0x2a0ull << 10,
+ 0x2a1ull << 10,
+ 0x2a2ull << 10,
+ 0x2a3ull << 10,
+ 0x2a4ull << 10,
+ 0x2a5ull << 10,
+ 0x2a6ull << 10,
+ 0x2a7ull << 10,
+ 0x2a8ull << 10,
+ 0x2a9ull << 10,
+
+ 0x2b0ull << 10,
+ 0x2b1ull << 10,
+ 0x2b2ull << 10,
+ 0x2b3ull << 10,
+ 0x2b4ull << 10,
+ 0x2b5ull << 10,
+ 0x2b6ull << 10,
+ 0x2b7ull << 10,
+ 0x2b8ull << 10,
+ 0x2b9ull << 10,
+
+ 0x2c0ull << 10,
+ 0x2c1ull << 10,
+ 0x2c2ull << 10,
+ 0x2c3ull << 10,
+ 0x2c4ull << 10,
+ 0x2c5ull << 10,
+ 0x2c6ull << 10,
+ 0x2c7ull << 10,
+ 0x2c8ull << 10,
+ 0x2c9ull << 10,
+
+ 0x2d0ull << 10,
+ 0x2d1ull << 10,
+ 0x2d2ull << 10,
+ 0x2d3ull << 10,
+ 0x2d4ull << 10,
+ 0x2d5ull << 10,
+ 0x2d6ull << 10,
+ 0x2d7ull << 10,
+ 0x2d8ull << 10,
+ 0x2d9ull << 10,
+
+ 0x2e0ull << 10,
+ 0x2e1ull << 10,
+ 0x2e2ull << 10,
+ 0x2e3ull << 10,
+ 0x2e4ull << 10,
+ 0x2e5ull << 10,
+ 0x2e6ull << 10,
+ 0x2e7ull << 10,
+ 0x2e8ull << 10,
+ 0x2e9ull << 10,
+
+ 0x2f0ull << 10,
+ 0x2f1ull << 10,
+ 0x2f2ull << 10,
+ 0x2f3ull << 10,
+ 0x2f4ull << 10,
+ 0x2f5ull << 10,
+ 0x2f6ull << 10,
+ 0x2f7ull << 10,
+ 0x2f8ull << 10,
+ 0x2f9ull << 10,
+
+ 0x28aull << 10,
+ 0x28bull << 10,
+ 0x2aaull << 10,
+ 0x2abull << 10,
+ 0x2caull << 10,
+ 0x2cbull << 10,
+ 0x2eaull << 10,
+ 0x2ebull << 10,
+ 0x2ceull << 10,
+ 0x2cfull << 10,
+
+ 0x29aull << 10,
+ 0x29bull << 10,
+ 0x2baull << 10,
+ 0x2bbull << 10,
+ 0x2daull << 10,
+ 0x2dbull << 10,
+ 0x2faull << 10,
+ 0x2fbull << 10,
+ 0x2deull << 10,
+ 0x2dfull << 10,
+
+ 0x300ull << 10,
+ 0x301ull << 10,
+ 0x302ull << 10,
+ 0x303ull << 10,
+ 0x304ull << 10,
+ 0x305ull << 10,
+ 0x306ull << 10,
+ 0x307ull << 10,
+ 0x308ull << 10,
+ 0x309ull << 10,
+
+ 0x310ull << 10,
+ 0x311ull << 10,
+ 0x312ull << 10,
+ 0x313ull << 10,
+ 0x314ull << 10,
+ 0x315ull << 10,
+ 0x316ull << 10,
+ 0x317ull << 10,
+ 0x318ull << 10,
+ 0x319ull << 10,
+
+ 0x320ull << 10,
+ 0x321ull << 10,
+ 0x322ull << 10,
+ 0x323ull << 10,
+ 0x324ull << 10,
+ 0x325ull << 10,
+ 0x326ull << 10,
+ 0x327ull << 10,
+ 0x328ull << 10,
+ 0x329ull << 10,
+
+ 0x330ull << 10,
+ 0x331ull << 10,
+ 0x332ull << 10,
+ 0x333ull << 10,
+ 0x334ull << 10,
+ 0x335ull << 10,
+ 0x336ull << 10,
+ 0x337ull << 10,
+ 0x338ull << 10,
+ 0x339ull << 10,
+
+ 0x340ull << 10,
+ 0x341ull << 10,
+ 0x342ull << 10,
+ 0x343ull << 10,
+ 0x344ull << 10,
+ 0x345ull << 10,
+ 0x346ull << 10,
+ 0x347ull << 10,
+ 0x348ull << 10,
+ 0x349ull << 10,
+
+ 0x350ull << 10,
+ 0x351ull << 10,
+ 0x352ull << 10,
+ 0x353ull << 10,
+ 0x354ull << 10,
+ 0x355ull << 10,
+ 0x356ull << 10,
+ 0x357ull << 10,
+ 0x358ull << 10,
+ 0x359ull << 10,
+
+ 0x360ull << 10,
+ 0x361ull << 10,
+ 0x362ull << 10,
+ 0x363ull << 10,
+ 0x364ull << 10,
+ 0x365ull << 10,
+ 0x366ull << 10,
+ 0x367ull << 10,
+ 0x368ull << 10,
+ 0x369ull << 10,
+
+ 0x370ull << 10,
+ 0x371ull << 10,
+ 0x372ull << 10,
+ 0x373ull << 10,
+ 0x374ull << 10,
+ 0x375ull << 10,
+ 0x376ull << 10,
+ 0x377ull << 10,
+ 0x378ull << 10,
+ 0x379ull << 10,
+
+ 0x30aull << 10,
+ 0x30bull << 10,
+ 0x32aull << 10,
+ 0x32bull << 10,
+ 0x34aull << 10,
+ 0x34bull << 10,
+ 0x36aull << 10,
+ 0x36bull << 10,
+ 0x34eull << 10,
+ 0x34full << 10,
+
+ 0x31aull << 10,
+ 0x31bull << 10,
+ 0x33aull << 10,
+ 0x33bull << 10,
+ 0x35aull << 10,
+ 0x35bull << 10,
+ 0x37aull << 10,
+ 0x37bull << 10,
+ 0x35eull << 10,
+ 0x35full << 10,
+
+ 0x380ull << 10,
+ 0x381ull << 10,
+ 0x382ull << 10,
+ 0x383ull << 10,
+ 0x384ull << 10,
+ 0x385ull << 10,
+ 0x386ull << 10,
+ 0x387ull << 10,
+ 0x388ull << 10,
+ 0x389ull << 10,
+
+ 0x390ull << 10,
+ 0x391ull << 10,
+ 0x392ull << 10,
+ 0x393ull << 10,
+ 0x394ull << 10,
+ 0x395ull << 10,
+ 0x396ull << 10,
+ 0x397ull << 10,
+ 0x398ull << 10,
+ 0x399ull << 10,
+
+ 0x3a0ull << 10,
+ 0x3a1ull << 10,
+ 0x3a2ull << 10,
+ 0x3a3ull << 10,
+ 0x3a4ull << 10,
+ 0x3a5ull << 10,
+ 0x3a6ull << 10,
+ 0x3a7ull << 10,
+ 0x3a8ull << 10,
+ 0x3a9ull << 10,
+
+ 0x3b0ull << 10,
+ 0x3b1ull << 10,
+ 0x3b2ull << 10,
+ 0x3b3ull << 10,
+ 0x3b4ull << 10,
+ 0x3b5ull << 10,
+ 0x3b6ull << 10,
+ 0x3b7ull << 10,
+ 0x3b8ull << 10,
+ 0x3b9ull << 10,
+
+ 0x3c0ull << 10,
+ 0x3c1ull << 10,
+ 0x3c2ull << 10,
+ 0x3c3ull << 10,
+ 0x3c4ull << 10,
+ 0x3c5ull << 10,
+ 0x3c6ull << 10,
+ 0x3c7ull << 10,
+ 0x3c8ull << 10,
+ 0x3c9ull << 10,
+
+ 0x3d0ull << 10,
+ 0x3d1ull << 10,
+ 0x3d2ull << 10,
+ 0x3d3ull << 10,
+ 0x3d4ull << 10,
+ 0x3d5ull << 10,
+ 0x3d6ull << 10,
+ 0x3d7ull << 10,
+ 0x3d8ull << 10,
+ 0x3d9ull << 10,
+
+ 0x3e0ull << 10,
+ 0x3e1ull << 10,
+ 0x3e2ull << 10,
+ 0x3e3ull << 10,
+ 0x3e4ull << 10,
+ 0x3e5ull << 10,
+ 0x3e6ull << 10,
+ 0x3e7ull << 10,
+ 0x3e8ull << 10,
+ 0x3e9ull << 10,
+
+ 0x3f0ull << 10,
+ 0x3f1ull << 10,
+ 0x3f2ull << 10,
+ 0x3f3ull << 10,
+ 0x3f4ull << 10,
+ 0x3f5ull << 10,
+ 0x3f6ull << 10,
+ 0x3f7ull << 10,
+ 0x3f8ull << 10,
+ 0x3f9ull << 10,
+
+ 0x38aull << 10,
+ 0x38bull << 10,
+ 0x3aaull << 10,
+ 0x3abull << 10,
+ 0x3caull << 10,
+ 0x3cbull << 10,
+ 0x3eaull << 10,
+ 0x3ebull << 10,
+ 0x3ceull << 10,
+ 0x3cfull << 10,
+
+ 0x39aull << 10,
+ 0x39bull << 10,
+ 0x3baull << 10,
+ 0x3bbull << 10,
+ 0x3daull << 10,
+ 0x3dbull << 10,
+ 0x3faull << 10,
+ 0x3fbull << 10,
+ 0x3deull << 10,
+ 0x3dfull << 10,
+
+ 0x00cull << 10,
+ 0x00dull << 10,
+ 0x10cull << 10,
+ 0x10dull << 10,
+ 0x20cull << 10,
+ 0x20dull << 10,
+ 0x30cull << 10,
+ 0x30dull << 10,
+ 0x02eull << 10,
+ 0x02full << 10,
+
+ 0x01cull << 10,
+ 0x01dull << 10,
+ 0x11cull << 10,
+ 0x11dull << 10,
+ 0x21cull << 10,
+ 0x21dull << 10,
+ 0x31cull << 10,
+ 0x31dull << 10,
+ 0x03eull << 10,
+ 0x03full << 10,
+
+ 0x02cull << 10,
+ 0x02dull << 10,
+ 0x12cull << 10,
+ 0x12dull << 10,
+ 0x22cull << 10,
+ 0x22dull << 10,
+ 0x32cull << 10,
+ 0x32dull << 10,
+ 0x12eull << 10,
+ 0x12full << 10,
+
+ 0x03cull << 10,
+ 0x03dull << 10,
+ 0x13cull << 10,
+ 0x13dull << 10,
+ 0x23cull << 10,
+ 0x23dull << 10,
+ 0x33cull << 10,
+ 0x33dull << 10,
+ 0x13eull << 10,
+ 0x13full << 10,
+
+ 0x04cull << 10,
+ 0x04dull << 10,
+ 0x14cull << 10,
+ 0x14dull << 10,
+ 0x24cull << 10,
+ 0x24dull << 10,
+ 0x34cull << 10,
+ 0x34dull << 10,
+ 0x22eull << 10,
+ 0x22full << 10,
+
+ 0x05cull << 10,
+ 0x05dull << 10,
+ 0x15cull << 10,
+ 0x15dull << 10,
+ 0x25cull << 10,
+ 0x25dull << 10,
+ 0x35cull << 10,
+ 0x35dull << 10,
+ 0x23eull << 10,
+ 0x23full << 10,
+
+ 0x06cull << 10,
+ 0x06dull << 10,
+ 0x16cull << 10,
+ 0x16dull << 10,
+ 0x26cull << 10,
+ 0x26dull << 10,
+ 0x36cull << 10,
+ 0x36dull << 10,
+ 0x32eull << 10,
+ 0x32full << 10,
+
+ 0x07cull << 10,
+ 0x07dull << 10,
+ 0x17cull << 10,
+ 0x17dull << 10,
+ 0x27cull << 10,
+ 0x27dull << 10,
+ 0x37cull << 10,
+ 0x37dull << 10,
+ 0x33eull << 10,
+ 0x33full << 10,
+
+ 0x00eull << 10,
+ 0x00full << 10,
+ 0x10eull << 10,
+ 0x10full << 10,
+ 0x20eull << 10,
+ 0x20full << 10,
+ 0x30eull << 10,
+ 0x30full << 10,
+ 0x06eull << 10,
+ 0x06full << 10,
+
+ 0x01eull << 10,
+ 0x01full << 10,
+ 0x11eull << 10,
+ 0x11full << 10,
+ 0x21eull << 10,
+ 0x21full << 10,
+ 0x31eull << 10,
+ 0x31full << 10,
+ 0x07eull << 10,
+ 0x07full << 10,
+
+ 0x08cull << 10,
+ 0x08dull << 10,
+ 0x18cull << 10,
+ 0x18dull << 10,
+ 0x28cull << 10,
+ 0x28dull << 10,
+ 0x38cull << 10,
+ 0x38dull << 10,
+ 0x0aeull << 10,
+ 0x0afull << 10,
+
+ 0x09cull << 10,
+ 0x09dull << 10,
+ 0x19cull << 10,
+ 0x19dull << 10,
+ 0x29cull << 10,
+ 0x29dull << 10,
+ 0x39cull << 10,
+ 0x39dull << 10,
+ 0x0beull << 10,
+ 0x0bfull << 10,
+
+ 0x0acull << 10,
+ 0x0adull << 10,
+ 0x1acull << 10,
+ 0x1adull << 10,
+ 0x2acull << 10,
+ 0x2adull << 10,
+ 0x3acull << 10,
+ 0x3adull << 10,
+ 0x1aeull << 10,
+ 0x1afull << 10,
+
+ 0x0bcull << 10,
+ 0x0bdull << 10,
+ 0x1bcull << 10,
+ 0x1bdull << 10,
+ 0x2bcull << 10,
+ 0x2bdull << 10,
+ 0x3bcull << 10,
+ 0x3bdull << 10,
+ 0x1beull << 10,
+ 0x1bfull << 10,
+
+ 0x0ccull << 10,
+ 0x0cdull << 10,
+ 0x1ccull << 10,
+ 0x1cdull << 10,
+ 0x2ccull << 10,
+ 0x2cdull << 10,
+ 0x3ccull << 10,
+ 0x3cdull << 10,
+ 0x2aeull << 10,
+ 0x2afull << 10,
+
+ 0x0dcull << 10,
+ 0x0ddull << 10,
+ 0x1dcull << 10,
+ 0x1ddull << 10,
+ 0x2dcull << 10,
+ 0x2ddull << 10,
+ 0x3dcull << 10,
+ 0x3ddull << 10,
+ 0x2beull << 10,
+ 0x2bfull << 10,
+
+ 0x0ecull << 10,
+ 0x0edull << 10,
+ 0x1ecull << 10,
+ 0x1edull << 10,
+ 0x2ecull << 10,
+ 0x2edull << 10,
+ 0x3ecull << 10,
+ 0x3edull << 10,
+ 0x3aeull << 10,
+ 0x3afull << 10,
+
+ 0x0fcull << 10,
+ 0x0fdull << 10,
+ 0x1fcull << 10,
+ 0x1fdull << 10,
+ 0x2fcull << 10,
+ 0x2fdull << 10,
+ 0x3fcull << 10,
+ 0x3fdull << 10,
+ 0x3beull << 10,
+ 0x3bfull << 10,
+
+ 0x08eull << 10,
+ 0x08full << 10,
+ 0x18eull << 10,
+ 0x18full << 10,
+ 0x28eull << 10,
+ 0x28full << 10,
+ 0x38eull << 10,
+ 0x38full << 10,
+ 0x0eeull << 10,
+ 0x0efull << 10,
+
+ 0x09eull << 10,
+ 0x09full << 10,
+ 0x19eull << 10,
+ 0x19full << 10,
+ 0x29eull << 10,
+ 0x29full << 10,
+ 0x39eull << 10,
+ 0x39full << 10,
+ 0x0feull << 10,
+ 0x0ffull << 10
+};
+
+static const UINT64 b2d3[] = {
+ 0x000ull << 20,
+ 0x001ull << 20,
+ 0x002ull << 20,
+ 0x003ull << 20,
+ 0x004ull << 20,
+ 0x005ull << 20,
+ 0x006ull << 20,
+ 0x007ull << 20,
+ 0x008ull << 20,
+ 0x009ull << 20,
+
+ 0x010ull << 20,
+ 0x011ull << 20,
+ 0x012ull << 20,
+ 0x013ull << 20,
+ 0x014ull << 20,
+ 0x015ull << 20,
+ 0x016ull << 20,
+ 0x017ull << 20,
+ 0x018ull << 20,
+ 0x019ull << 20,
+
+ 0x020ull << 20,
+ 0x021ull << 20,
+ 0x022ull << 20,
+ 0x023ull << 20,
+ 0x024ull << 20,
+ 0x025ull << 20,
+ 0x026ull << 20,
+ 0x027ull << 20,
+ 0x028ull << 20,
+ 0x029ull << 20,
+
+ 0x030ull << 20,
+ 0x031ull << 20,
+ 0x032ull << 20,
+ 0x033ull << 20,
+ 0x034ull << 20,
+ 0x035ull << 20,
+ 0x036ull << 20,
+ 0x037ull << 20,
+ 0x038ull << 20,
+ 0x039ull << 20,
+
+ 0x040ull << 20,
+ 0x041ull << 20,
+ 0x042ull << 20,
+ 0x043ull << 20,
+ 0x044ull << 20,
+ 0x045ull << 20,
+ 0x046ull << 20,
+ 0x047ull << 20,
+ 0x048ull << 20,
+ 0x049ull << 20,
+
+ 0x050ull << 20,
+ 0x051ull << 20,
+ 0x052ull << 20,
+ 0x053ull << 20,
+ 0x054ull << 20,
+ 0x055ull << 20,
+ 0x056ull << 20,
+ 0x057ull << 20,
+ 0x058ull << 20,
+ 0x059ull << 20,
+
+ 0x060ull << 20,
+ 0x061ull << 20,
+ 0x062ull << 20,
+ 0x063ull << 20,
+ 0x064ull << 20,
+ 0x065ull << 20,
+ 0x066ull << 20,
+ 0x067ull << 20,
+ 0x068ull << 20,
+ 0x069ull << 20,
+
+ 0x070ull << 20,
+ 0x071ull << 20,
+ 0x072ull << 20,
+ 0x073ull << 20,
+ 0x074ull << 20,
+ 0x075ull << 20,
+ 0x076ull << 20,
+ 0x077ull << 20,
+ 0x078ull << 20,
+ 0x079ull << 20,
+
+ 0x00aull << 20,
+ 0x00bull << 20,
+ 0x02aull << 20,
+ 0x02bull << 20,
+ 0x04aull << 20,
+ 0x04bull << 20,
+ 0x06aull << 20,
+ 0x06bull << 20,
+ 0x04eull << 20,
+ 0x04full << 20,
+
+ 0x01aull << 20,
+ 0x01bull << 20,
+ 0x03aull << 20,
+ 0x03bull << 20,
+ 0x05aull << 20,
+ 0x05bull << 20,
+ 0x07aull << 20,
+ 0x07bull << 20,
+ 0x05eull << 20,
+ 0x05full << 20,
+
+ 0x080ull << 20,
+ 0x081ull << 20,
+ 0x082ull << 20,
+ 0x083ull << 20,
+ 0x084ull << 20,
+ 0x085ull << 20,
+ 0x086ull << 20,
+ 0x087ull << 20,
+ 0x088ull << 20,
+ 0x089ull << 20,
+
+ 0x090ull << 20,
+ 0x091ull << 20,
+ 0x092ull << 20,
+ 0x093ull << 20,
+ 0x094ull << 20,
+ 0x095ull << 20,
+ 0x096ull << 20,
+ 0x097ull << 20,
+ 0x098ull << 20,
+ 0x099ull << 20,
+
+ 0x0a0ull << 20,
+ 0x0a1ull << 20,
+ 0x0a2ull << 20,
+ 0x0a3ull << 20,
+ 0x0a4ull << 20,
+ 0x0a5ull << 20,
+ 0x0a6ull << 20,
+ 0x0a7ull << 20,
+ 0x0a8ull << 20,
+ 0x0a9ull << 20,
+
+ 0x0b0ull << 20,
+ 0x0b1ull << 20,
+ 0x0b2ull << 20,
+ 0x0b3ull << 20,
+ 0x0b4ull << 20,
+ 0x0b5ull << 20,
+ 0x0b6ull << 20,
+ 0x0b7ull << 20,
+ 0x0b8ull << 20,
+ 0x0b9ull << 20,
+
+ 0x0c0ull << 20,
+ 0x0c1ull << 20,
+ 0x0c2ull << 20,
+ 0x0c3ull << 20,
+ 0x0c4ull << 20,
+ 0x0c5ull << 20,
+ 0x0c6ull << 20,
+ 0x0c7ull << 20,
+ 0x0c8ull << 20,
+ 0x0c9ull << 20,
+
+ 0x0d0ull << 20,
+ 0x0d1ull << 20,
+ 0x0d2ull << 20,
+ 0x0d3ull << 20,
+ 0x0d4ull << 20,
+ 0x0d5ull << 20,
+ 0x0d6ull << 20,
+ 0x0d7ull << 20,
+ 0x0d8ull << 20,
+ 0x0d9ull << 20,
+
+ 0x0e0ull << 20,
+ 0x0e1ull << 20,
+ 0x0e2ull << 20,
+ 0x0e3ull << 20,
+ 0x0e4ull << 20,
+ 0x0e5ull << 20,
+ 0x0e6ull << 20,
+ 0x0e7ull << 20,
+ 0x0e8ull << 20,
+ 0x0e9ull << 20,
+
+ 0x0f0ull << 20,
+ 0x0f1ull << 20,
+ 0x0f2ull << 20,
+ 0x0f3ull << 20,
+ 0x0f4ull << 20,
+ 0x0f5ull << 20,
+ 0x0f6ull << 20,
+ 0x0f7ull << 20,
+ 0x0f8ull << 20,
+ 0x0f9ull << 20,
+
+ 0x08aull << 20,
+ 0x08bull << 20,
+ 0x0aaull << 20,
+ 0x0abull << 20,
+ 0x0caull << 20,
+ 0x0cbull << 20,
+ 0x0eaull << 20,
+ 0x0ebull << 20,
+ 0x0ceull << 20,
+ 0x0cfull << 20,
+
+ 0x09aull << 20,
+ 0x09bull << 20,
+ 0x0baull << 20,
+ 0x0bbull << 20,
+ 0x0daull << 20,
+ 0x0dbull << 20,
+ 0x0faull << 20,
+ 0x0fbull << 20,
+ 0x0deull << 20,
+ 0x0dfull << 20,
+
+ 0x100ull << 20,
+ 0x101ull << 20,
+ 0x102ull << 20,
+ 0x103ull << 20,
+ 0x104ull << 20,
+ 0x105ull << 20,
+ 0x106ull << 20,
+ 0x107ull << 20,
+ 0x108ull << 20,
+ 0x109ull << 20,
+
+ 0x110ull << 20,
+ 0x111ull << 20,
+ 0x112ull << 20,
+ 0x113ull << 20,
+ 0x114ull << 20,
+ 0x115ull << 20,
+ 0x116ull << 20,
+ 0x117ull << 20,
+ 0x118ull << 20,
+ 0x119ull << 20,
+
+ 0x120ull << 20,
+ 0x121ull << 20,
+ 0x122ull << 20,
+ 0x123ull << 20,
+ 0x124ull << 20,
+ 0x125ull << 20,
+ 0x126ull << 20,
+ 0x127ull << 20,
+ 0x128ull << 20,
+ 0x129ull << 20,
+
+ 0x130ull << 20,
+ 0x131ull << 20,
+ 0x132ull << 20,
+ 0x133ull << 20,
+ 0x134ull << 20,
+ 0x135ull << 20,
+ 0x136ull << 20,
+ 0x137ull << 20,
+ 0x138ull << 20,
+ 0x139ull << 20,
+
+ 0x140ull << 20,
+ 0x141ull << 20,
+ 0x142ull << 20,
+ 0x143ull << 20,
+ 0x144ull << 20,
+ 0x145ull << 20,
+ 0x146ull << 20,
+ 0x147ull << 20,
+ 0x148ull << 20,
+ 0x149ull << 20,
+
+ 0x150ull << 20,
+ 0x151ull << 20,
+ 0x152ull << 20,
+ 0x153ull << 20,
+ 0x154ull << 20,
+ 0x155ull << 20,
+ 0x156ull << 20,
+ 0x157ull << 20,
+ 0x158ull << 20,
+ 0x159ull << 20,
+
+ 0x160ull << 20,
+ 0x161ull << 20,
+ 0x162ull << 20,
+ 0x163ull << 20,
+ 0x164ull << 20,
+ 0x165ull << 20,
+ 0x166ull << 20,
+ 0x167ull << 20,
+ 0x168ull << 20,
+ 0x169ull << 20,
+
+ 0x170ull << 20,
+ 0x171ull << 20,
+ 0x172ull << 20,
+ 0x173ull << 20,
+ 0x174ull << 20,
+ 0x175ull << 20,
+ 0x176ull << 20,
+ 0x177ull << 20,
+ 0x178ull << 20,
+ 0x179ull << 20,
+
+ 0x10aull << 20,
+ 0x10bull << 20,
+ 0x12aull << 20,
+ 0x12bull << 20,
+ 0x14aull << 20,
+ 0x14bull << 20,
+ 0x16aull << 20,
+ 0x16bull << 20,
+ 0x14eull << 20,
+ 0x14full << 20,
+
+ 0x11aull << 20,
+ 0x11bull << 20,
+ 0x13aull << 20,
+ 0x13bull << 20,
+ 0x15aull << 20,
+ 0x15bull << 20,
+ 0x17aull << 20,
+ 0x17bull << 20,
+ 0x15eull << 20,
+ 0x15full << 20,
+
+ 0x180ull << 20,
+ 0x181ull << 20,
+ 0x182ull << 20,
+ 0x183ull << 20,
+ 0x184ull << 20,
+ 0x185ull << 20,
+ 0x186ull << 20,
+ 0x187ull << 20,
+ 0x188ull << 20,
+ 0x189ull << 20,
+
+ 0x190ull << 20,
+ 0x191ull << 20,
+ 0x192ull << 20,
+ 0x193ull << 20,
+ 0x194ull << 20,
+ 0x195ull << 20,
+ 0x196ull << 20,
+ 0x197ull << 20,
+ 0x198ull << 20,
+ 0x199ull << 20,
+
+ 0x1a0ull << 20,
+ 0x1a1ull << 20,
+ 0x1a2ull << 20,
+ 0x1a3ull << 20,
+ 0x1a4ull << 20,
+ 0x1a5ull << 20,
+ 0x1a6ull << 20,
+ 0x1a7ull << 20,
+ 0x1a8ull << 20,
+ 0x1a9ull << 20,
+
+ 0x1b0ull << 20,
+ 0x1b1ull << 20,
+ 0x1b2ull << 20,
+ 0x1b3ull << 20,
+ 0x1b4ull << 20,
+ 0x1b5ull << 20,
+ 0x1b6ull << 20,
+ 0x1b7ull << 20,
+ 0x1b8ull << 20,
+ 0x1b9ull << 20,
+
+ 0x1c0ull << 20,
+ 0x1c1ull << 20,
+ 0x1c2ull << 20,
+ 0x1c3ull << 20,
+ 0x1c4ull << 20,
+ 0x1c5ull << 20,
+ 0x1c6ull << 20,
+ 0x1c7ull << 20,
+ 0x1c8ull << 20,
+ 0x1c9ull << 20,
+
+ 0x1d0ull << 20,
+ 0x1d1ull << 20,
+ 0x1d2ull << 20,
+ 0x1d3ull << 20,
+ 0x1d4ull << 20,
+ 0x1d5ull << 20,
+ 0x1d6ull << 20,
+ 0x1d7ull << 20,
+ 0x1d8ull << 20,
+ 0x1d9ull << 20,
+
+ 0x1e0ull << 20,
+ 0x1e1ull << 20,
+ 0x1e2ull << 20,
+ 0x1e3ull << 20,
+ 0x1e4ull << 20,
+ 0x1e5ull << 20,
+ 0x1e6ull << 20,
+ 0x1e7ull << 20,
+ 0x1e8ull << 20,
+ 0x1e9ull << 20,
+
+ 0x1f0ull << 20,
+ 0x1f1ull << 20,
+ 0x1f2ull << 20,
+ 0x1f3ull << 20,
+ 0x1f4ull << 20,
+ 0x1f5ull << 20,
+ 0x1f6ull << 20,
+ 0x1f7ull << 20,
+ 0x1f8ull << 20,
+ 0x1f9ull << 20,
+
+ 0x18aull << 20,
+ 0x18bull << 20,
+ 0x1aaull << 20,
+ 0x1abull << 20,
+ 0x1caull << 20,
+ 0x1cbull << 20,
+ 0x1eaull << 20,
+ 0x1ebull << 20,
+ 0x1ceull << 20,
+ 0x1cfull << 20,
+
+ 0x19aull << 20,
+ 0x19bull << 20,
+ 0x1baull << 20,
+ 0x1bbull << 20,
+ 0x1daull << 20,
+ 0x1dbull << 20,
+ 0x1faull << 20,
+ 0x1fbull << 20,
+ 0x1deull << 20,
+ 0x1dfull << 20,
+
+ 0x200ull << 20,
+ 0x201ull << 20,
+ 0x202ull << 20,
+ 0x203ull << 20,
+ 0x204ull << 20,
+ 0x205ull << 20,
+ 0x206ull << 20,
+ 0x207ull << 20,
+ 0x208ull << 20,
+ 0x209ull << 20,
+
+ 0x210ull << 20,
+ 0x211ull << 20,
+ 0x212ull << 20,
+ 0x213ull << 20,
+ 0x214ull << 20,
+ 0x215ull << 20,
+ 0x216ull << 20,
+ 0x217ull << 20,
+ 0x218ull << 20,
+ 0x219ull << 20,
+
+ 0x220ull << 20,
+ 0x221ull << 20,
+ 0x222ull << 20,
+ 0x223ull << 20,
+ 0x224ull << 20,
+ 0x225ull << 20,
+ 0x226ull << 20,
+ 0x227ull << 20,
+ 0x228ull << 20,
+ 0x229ull << 20,
+
+ 0x230ull << 20,
+ 0x231ull << 20,
+ 0x232ull << 20,
+ 0x233ull << 20,
+ 0x234ull << 20,
+ 0x235ull << 20,
+ 0x236ull << 20,
+ 0x237ull << 20,
+ 0x238ull << 20,
+ 0x239ull << 20,
+
+ 0x240ull << 20,
+ 0x241ull << 20,
+ 0x242ull << 20,
+ 0x243ull << 20,
+ 0x244ull << 20,
+ 0x245ull << 20,
+ 0x246ull << 20,
+ 0x247ull << 20,
+ 0x248ull << 20,
+ 0x249ull << 20,
+
+ 0x250ull << 20,
+ 0x251ull << 20,
+ 0x252ull << 20,
+ 0x253ull << 20,
+ 0x254ull << 20,
+ 0x255ull << 20,
+ 0x256ull << 20,
+ 0x257ull << 20,
+ 0x258ull << 20,
+ 0x259ull << 20,
+
+ 0x260ull << 20,
+ 0x261ull << 20,
+ 0x262ull << 20,
+ 0x263ull << 20,
+ 0x264ull << 20,
+ 0x265ull << 20,
+ 0x266ull << 20,
+ 0x267ull << 20,
+ 0x268ull << 20,
+ 0x269ull << 20,
+
+ 0x270ull << 20,
+ 0x271ull << 20,
+ 0x272ull << 20,
+ 0x273ull << 20,
+ 0x274ull << 20,
+ 0x275ull << 20,
+ 0x276ull << 20,
+ 0x277ull << 20,
+ 0x278ull << 20,
+ 0x279ull << 20,
+
+ 0x20aull << 20,
+ 0x20bull << 20,
+ 0x22aull << 20,
+ 0x22bull << 20,
+ 0x24aull << 20,
+ 0x24bull << 20,
+ 0x26aull << 20,
+ 0x26bull << 20,
+ 0x24eull << 20,
+ 0x24full << 20,
+
+ 0x21aull << 20,
+ 0x21bull << 20,
+ 0x23aull << 20,
+ 0x23bull << 20,
+ 0x25aull << 20,
+ 0x25bull << 20,
+ 0x27aull << 20,
+ 0x27bull << 20,
+ 0x25eull << 20,
+ 0x25full << 20,
+
+ 0x280ull << 20,
+ 0x281ull << 20,
+ 0x282ull << 20,
+ 0x283ull << 20,
+ 0x284ull << 20,
+ 0x285ull << 20,
+ 0x286ull << 20,
+ 0x287ull << 20,
+ 0x288ull << 20,
+ 0x289ull << 20,
+
+ 0x290ull << 20,
+ 0x291ull << 20,
+ 0x292ull << 20,
+ 0x293ull << 20,
+ 0x294ull << 20,
+ 0x295ull << 20,
+ 0x296ull << 20,
+ 0x297ull << 20,
+ 0x298ull << 20,
+ 0x299ull << 20,
+
+ 0x2a0ull << 20,
+ 0x2a1ull << 20,
+ 0x2a2ull << 20,
+ 0x2a3ull << 20,
+ 0x2a4ull << 20,
+ 0x2a5ull << 20,
+ 0x2a6ull << 20,
+ 0x2a7ull << 20,
+ 0x2a8ull << 20,
+ 0x2a9ull << 20,
+
+ 0x2b0ull << 20,
+ 0x2b1ull << 20,
+ 0x2b2ull << 20,
+ 0x2b3ull << 20,
+ 0x2b4ull << 20,
+ 0x2b5ull << 20,
+ 0x2b6ull << 20,
+ 0x2b7ull << 20,
+ 0x2b8ull << 20,
+ 0x2b9ull << 20,
+
+ 0x2c0ull << 20,
+ 0x2c1ull << 20,
+ 0x2c2ull << 20,
+ 0x2c3ull << 20,
+ 0x2c4ull << 20,
+ 0x2c5ull << 20,
+ 0x2c6ull << 20,
+ 0x2c7ull << 20,
+ 0x2c8ull << 20,
+ 0x2c9ull << 20,
+
+ 0x2d0ull << 20,
+ 0x2d1ull << 20,
+ 0x2d2ull << 20,
+ 0x2d3ull << 20,
+ 0x2d4ull << 20,
+ 0x2d5ull << 20,
+ 0x2d6ull << 20,
+ 0x2d7ull << 20,
+ 0x2d8ull << 20,
+ 0x2d9ull << 20,
+
+ 0x2e0ull << 20,
+ 0x2e1ull << 20,
+ 0x2e2ull << 20,
+ 0x2e3ull << 20,
+ 0x2e4ull << 20,
+ 0x2e5ull << 20,
+ 0x2e6ull << 20,
+ 0x2e7ull << 20,
+ 0x2e8ull << 20,
+ 0x2e9ull << 20,
+
+ 0x2f0ull << 20,
+ 0x2f1ull << 20,
+ 0x2f2ull << 20,
+ 0x2f3ull << 20,
+ 0x2f4ull << 20,
+ 0x2f5ull << 20,
+ 0x2f6ull << 20,
+ 0x2f7ull << 20,
+ 0x2f8ull << 20,
+ 0x2f9ull << 20,
+
+ 0x28aull << 20,
+ 0x28bull << 20,
+ 0x2aaull << 20,
+ 0x2abull << 20,
+ 0x2caull << 20,
+ 0x2cbull << 20,
+ 0x2eaull << 20,
+ 0x2ebull << 20,
+ 0x2ceull << 20,
+ 0x2cfull << 20,
+
+ 0x29aull << 20,
+ 0x29bull << 20,
+ 0x2baull << 20,
+ 0x2bbull << 20,
+ 0x2daull << 20,
+ 0x2dbull << 20,
+ 0x2faull << 20,
+ 0x2fbull << 20,
+ 0x2deull << 20,
+ 0x2dfull << 20,
+
+ 0x300ull << 20,
+ 0x301ull << 20,
+ 0x302ull << 20,
+ 0x303ull << 20,
+ 0x304ull << 20,
+ 0x305ull << 20,
+ 0x306ull << 20,
+ 0x307ull << 20,
+ 0x308ull << 20,
+ 0x309ull << 20,
+
+ 0x310ull << 20,
+ 0x311ull << 20,
+ 0x312ull << 20,
+ 0x313ull << 20,
+ 0x314ull << 20,
+ 0x315ull << 20,
+ 0x316ull << 20,
+ 0x317ull << 20,
+ 0x318ull << 20,
+ 0x319ull << 20,
+
+ 0x320ull << 20,
+ 0x321ull << 20,
+ 0x322ull << 20,
+ 0x323ull << 20,
+ 0x324ull << 20,
+ 0x325ull << 20,
+ 0x326ull << 20,
+ 0x327ull << 20,
+ 0x328ull << 20,
+ 0x329ull << 20,
+
+ 0x330ull << 20,
+ 0x331ull << 20,
+ 0x332ull << 20,
+ 0x333ull << 20,
+ 0x334ull << 20,
+ 0x335ull << 20,
+ 0x336ull << 20,
+ 0x337ull << 20,
+ 0x338ull << 20,
+ 0x339ull << 20,
+
+ 0x340ull << 20,
+ 0x341ull << 20,
+ 0x342ull << 20,
+ 0x343ull << 20,
+ 0x344ull << 20,
+ 0x345ull << 20,
+ 0x346ull << 20,
+ 0x347ull << 20,
+ 0x348ull << 20,
+ 0x349ull << 20,
+
+ 0x350ull << 20,
+ 0x351ull << 20,
+ 0x352ull << 20,
+ 0x353ull << 20,
+ 0x354ull << 20,
+ 0x355ull << 20,
+ 0x356ull << 20,
+ 0x357ull << 20,
+ 0x358ull << 20,
+ 0x359ull << 20,
+
+ 0x360ull << 20,
+ 0x361ull << 20,
+ 0x362ull << 20,
+ 0x363ull << 20,
+ 0x364ull << 20,
+ 0x365ull << 20,
+ 0x366ull << 20,
+ 0x367ull << 20,
+ 0x368ull << 20,
+ 0x369ull << 20,
+
+ 0x370ull << 20,
+ 0x371ull << 20,
+ 0x372ull << 20,
+ 0x373ull << 20,
+ 0x374ull << 20,
+ 0x375ull << 20,
+ 0x376ull << 20,
+ 0x377ull << 20,
+ 0x378ull << 20,
+ 0x379ull << 20,
+
+ 0x30aull << 20,
+ 0x30bull << 20,
+ 0x32aull << 20,
+ 0x32bull << 20,
+ 0x34aull << 20,
+ 0x34bull << 20,
+ 0x36aull << 20,
+ 0x36bull << 20,
+ 0x34eull << 20,
+ 0x34full << 20,
+
+ 0x31aull << 20,
+ 0x31bull << 20,
+ 0x33aull << 20,
+ 0x33bull << 20,
+ 0x35aull << 20,
+ 0x35bull << 20,
+ 0x37aull << 20,
+ 0x37bull << 20,
+ 0x35eull << 20,
+ 0x35full << 20,
+
+ 0x380ull << 20,
+ 0x381ull << 20,
+ 0x382ull << 20,
+ 0x383ull << 20,
+ 0x384ull << 20,
+ 0x385ull << 20,
+ 0x386ull << 20,
+ 0x387ull << 20,
+ 0x388ull << 20,
+ 0x389ull << 20,
+
+ 0x390ull << 20,
+ 0x391ull << 20,
+ 0x392ull << 20,
+ 0x393ull << 20,
+ 0x394ull << 20,
+ 0x395ull << 20,
+ 0x396ull << 20,
+ 0x397ull << 20,
+ 0x398ull << 20,
+ 0x399ull << 20,
+
+ 0x3a0ull << 20,
+ 0x3a1ull << 20,
+ 0x3a2ull << 20,
+ 0x3a3ull << 20,
+ 0x3a4ull << 20,
+ 0x3a5ull << 20,
+ 0x3a6ull << 20,
+ 0x3a7ull << 20,
+ 0x3a8ull << 20,
+ 0x3a9ull << 20,
+
+ 0x3b0ull << 20,
+ 0x3b1ull << 20,
+ 0x3b2ull << 20,
+ 0x3b3ull << 20,
+ 0x3b4ull << 20,
+ 0x3b5ull << 20,
+ 0x3b6ull << 20,
+ 0x3b7ull << 20,
+ 0x3b8ull << 20,
+ 0x3b9ull << 20,
+
+ 0x3c0ull << 20,
+ 0x3c1ull << 20,
+ 0x3c2ull << 20,
+ 0x3c3ull << 20,
+ 0x3c4ull << 20,
+ 0x3c5ull << 20,
+ 0x3c6ull << 20,
+ 0x3c7ull << 20,
+ 0x3c8ull << 20,
+ 0x3c9ull << 20,
+
+ 0x3d0ull << 20,
+ 0x3d1ull << 20,
+ 0x3d2ull << 20,
+ 0x3d3ull << 20,
+ 0x3d4ull << 20,
+ 0x3d5ull << 20,
+ 0x3d6ull << 20,
+ 0x3d7ull << 20,
+ 0x3d8ull << 20,
+ 0x3d9ull << 20,
+
+ 0x3e0ull << 20,
+ 0x3e1ull << 20,
+ 0x3e2ull << 20,
+ 0x3e3ull << 20,
+ 0x3e4ull << 20,
+ 0x3e5ull << 20,
+ 0x3e6ull << 20,
+ 0x3e7ull << 20,
+ 0x3e8ull << 20,
+ 0x3e9ull << 20,
+
+ 0x3f0ull << 20,
+ 0x3f1ull << 20,
+ 0x3f2ull << 20,
+ 0x3f3ull << 20,
+ 0x3f4ull << 20,
+ 0x3f5ull << 20,
+ 0x3f6ull << 20,
+ 0x3f7ull << 20,
+ 0x3f8ull << 20,
+ 0x3f9ull << 20,
+
+ 0x38aull << 20,
+ 0x38bull << 20,
+ 0x3aaull << 20,
+ 0x3abull << 20,
+ 0x3caull << 20,
+ 0x3cbull << 20,
+ 0x3eaull << 20,
+ 0x3ebull << 20,
+ 0x3ceull << 20,
+ 0x3cfull << 20,
+
+ 0x39aull << 20,
+ 0x39bull << 20,
+ 0x3baull << 20,
+ 0x3bbull << 20,
+ 0x3daull << 20,
+ 0x3dbull << 20,
+ 0x3faull << 20,
+ 0x3fbull << 20,
+ 0x3deull << 20,
+ 0x3dfull << 20,
+
+ 0x00cull << 20,
+ 0x00dull << 20,
+ 0x10cull << 20,
+ 0x10dull << 20,
+ 0x20cull << 20,
+ 0x20dull << 20,
+ 0x30cull << 20,
+ 0x30dull << 20,
+ 0x02eull << 20,
+ 0x02full << 20,
+
+ 0x01cull << 20,
+ 0x01dull << 20,
+ 0x11cull << 20,
+ 0x11dull << 20,
+ 0x21cull << 20,
+ 0x21dull << 20,
+ 0x31cull << 20,
+ 0x31dull << 20,
+ 0x03eull << 20,
+ 0x03full << 20,
+
+ 0x02cull << 20,
+ 0x02dull << 20,
+ 0x12cull << 20,
+ 0x12dull << 20,
+ 0x22cull << 20,
+ 0x22dull << 20,
+ 0x32cull << 20,
+ 0x32dull << 20,
+ 0x12eull << 20,
+ 0x12full << 20,
+
+ 0x03cull << 20,
+ 0x03dull << 20,
+ 0x13cull << 20,
+ 0x13dull << 20,
+ 0x23cull << 20,
+ 0x23dull << 20,
+ 0x33cull << 20,
+ 0x33dull << 20,
+ 0x13eull << 20,
+ 0x13full << 20,
+
+ 0x04cull << 20,
+ 0x04dull << 20,
+ 0x14cull << 20,
+ 0x14dull << 20,
+ 0x24cull << 20,
+ 0x24dull << 20,
+ 0x34cull << 20,
+ 0x34dull << 20,
+ 0x22eull << 20,
+ 0x22full << 20,
+
+ 0x05cull << 20,
+ 0x05dull << 20,
+ 0x15cull << 20,
+ 0x15dull << 20,
+ 0x25cull << 20,
+ 0x25dull << 20,
+ 0x35cull << 20,
+ 0x35dull << 20,
+ 0x23eull << 20,
+ 0x23full << 20,
+
+ 0x06cull << 20,
+ 0x06dull << 20,
+ 0x16cull << 20,
+ 0x16dull << 20,
+ 0x26cull << 20,
+ 0x26dull << 20,
+ 0x36cull << 20,
+ 0x36dull << 20,
+ 0x32eull << 20,
+ 0x32full << 20,
+
+ 0x07cull << 20,
+ 0x07dull << 20,
+ 0x17cull << 20,
+ 0x17dull << 20,
+ 0x27cull << 20,
+ 0x27dull << 20,
+ 0x37cull << 20,
+ 0x37dull << 20,
+ 0x33eull << 20,
+ 0x33full << 20,
+
+ 0x00eull << 20,
+ 0x00full << 20,
+ 0x10eull << 20,
+ 0x10full << 20,
+ 0x20eull << 20,
+ 0x20full << 20,
+ 0x30eull << 20,
+ 0x30full << 20,
+ 0x06eull << 20,
+ 0x06full << 20,
+
+ 0x01eull << 20,
+ 0x01full << 20,
+ 0x11eull << 20,
+ 0x11full << 20,
+ 0x21eull << 20,
+ 0x21full << 20,
+ 0x31eull << 20,
+ 0x31full << 20,
+ 0x07eull << 20,
+ 0x07full << 20,
+
+ 0x08cull << 20,
+ 0x08dull << 20,
+ 0x18cull << 20,
+ 0x18dull << 20,
+ 0x28cull << 20,
+ 0x28dull << 20,
+ 0x38cull << 20,
+ 0x38dull << 20,
+ 0x0aeull << 20,
+ 0x0afull << 20,
+
+ 0x09cull << 20,
+ 0x09dull << 20,
+ 0x19cull << 20,
+ 0x19dull << 20,
+ 0x29cull << 20,
+ 0x29dull << 20,
+ 0x39cull << 20,
+ 0x39dull << 20,
+ 0x0beull << 20,
+ 0x0bfull << 20,
+
+ 0x0acull << 20,
+ 0x0adull << 20,
+ 0x1acull << 20,
+ 0x1adull << 20,
+ 0x2acull << 20,
+ 0x2adull << 20,
+ 0x3acull << 20,
+ 0x3adull << 20,
+ 0x1aeull << 20,
+ 0x1afull << 20,
+
+ 0x0bcull << 20,
+ 0x0bdull << 20,
+ 0x1bcull << 20,
+ 0x1bdull << 20,
+ 0x2bcull << 20,
+ 0x2bdull << 20,
+ 0x3bcull << 20,
+ 0x3bdull << 20,
+ 0x1beull << 20,
+ 0x1bfull << 20,
+
+ 0x0ccull << 20,
+ 0x0cdull << 20,
+ 0x1ccull << 20,
+ 0x1cdull << 20,
+ 0x2ccull << 20,
+ 0x2cdull << 20,
+ 0x3ccull << 20,
+ 0x3cdull << 20,
+ 0x2aeull << 20,
+ 0x2afull << 20,
+
+ 0x0dcull << 20,
+ 0x0ddull << 20,
+ 0x1dcull << 20,
+ 0x1ddull << 20,
+ 0x2dcull << 20,
+ 0x2ddull << 20,
+ 0x3dcull << 20,
+ 0x3ddull << 20,
+ 0x2beull << 20,
+ 0x2bfull << 20,
+
+ 0x0ecull << 20,
+ 0x0edull << 20,
+ 0x1ecull << 20,
+ 0x1edull << 20,
+ 0x2ecull << 20,
+ 0x2edull << 20,
+ 0x3ecull << 20,
+ 0x3edull << 20,
+ 0x3aeull << 20,
+ 0x3afull << 20,
+
+ 0x0fcull << 20,
+ 0x0fdull << 20,
+ 0x1fcull << 20,
+ 0x1fdull << 20,
+ 0x2fcull << 20,
+ 0x2fdull << 20,
+ 0x3fcull << 20,
+ 0x3fdull << 20,
+ 0x3beull << 20,
+ 0x3bfull << 20,
+
+ 0x08eull << 20,
+ 0x08full << 20,
+ 0x18eull << 20,
+ 0x18full << 20,
+ 0x28eull << 20,
+ 0x28full << 20,
+ 0x38eull << 20,
+ 0x38full << 20,
+ 0x0eeull << 20,
+ 0x0efull << 20,
+
+ 0x09eull << 20,
+ 0x09full << 20,
+ 0x19eull << 20,
+ 0x19full << 20,
+ 0x29eull << 20,
+ 0x29full << 20,
+ 0x39eull << 20,
+ 0x39full << 20,
+ 0x0feull << 20,
+ 0x0ffull << 20
+};
+
+static const UINT64 b2d4[] = {
+ 0x000ull << 30,
+ 0x001ull << 30,
+ 0x002ull << 30,
+ 0x003ull << 30,
+ 0x004ull << 30,
+ 0x005ull << 30,
+ 0x006ull << 30,
+ 0x007ull << 30,
+ 0x008ull << 30,
+ 0x009ull << 30,
+
+ 0x010ull << 30,
+ 0x011ull << 30,
+ 0x012ull << 30,
+ 0x013ull << 30,
+ 0x014ull << 30,
+ 0x015ull << 30,
+ 0x016ull << 30,
+ 0x017ull << 30,
+ 0x018ull << 30,
+ 0x019ull << 30,
+
+ 0x020ull << 30,
+ 0x021ull << 30,
+ 0x022ull << 30,
+ 0x023ull << 30,
+ 0x024ull << 30,
+ 0x025ull << 30,
+ 0x026ull << 30,
+ 0x027ull << 30,
+ 0x028ull << 30,
+ 0x029ull << 30,
+
+ 0x030ull << 30,
+ 0x031ull << 30,
+ 0x032ull << 30,
+ 0x033ull << 30,
+ 0x034ull << 30,
+ 0x035ull << 30,
+ 0x036ull << 30,
+ 0x037ull << 30,
+ 0x038ull << 30,
+ 0x039ull << 30,
+
+ 0x040ull << 30,
+ 0x041ull << 30,
+ 0x042ull << 30,
+ 0x043ull << 30,
+ 0x044ull << 30,
+ 0x045ull << 30,
+ 0x046ull << 30,
+ 0x047ull << 30,
+ 0x048ull << 30,
+ 0x049ull << 30,
+
+ 0x050ull << 30,
+ 0x051ull << 30,
+ 0x052ull << 30,
+ 0x053ull << 30,
+ 0x054ull << 30,
+ 0x055ull << 30,
+ 0x056ull << 30,
+ 0x057ull << 30,
+ 0x058ull << 30,
+ 0x059ull << 30,
+
+ 0x060ull << 30,
+ 0x061ull << 30,
+ 0x062ull << 30,
+ 0x063ull << 30,
+ 0x064ull << 30,
+ 0x065ull << 30,
+ 0x066ull << 30,
+ 0x067ull << 30,
+ 0x068ull << 30,
+ 0x069ull << 30,
+
+ 0x070ull << 30,
+ 0x071ull << 30,
+ 0x072ull << 30,
+ 0x073ull << 30,
+ 0x074ull << 30,
+ 0x075ull << 30,
+ 0x076ull << 30,
+ 0x077ull << 30,
+ 0x078ull << 30,
+ 0x079ull << 30,
+
+ 0x00aull << 30,
+ 0x00bull << 30,
+ 0x02aull << 30,
+ 0x02bull << 30,
+ 0x04aull << 30,
+ 0x04bull << 30,
+ 0x06aull << 30,
+ 0x06bull << 30,
+ 0x04eull << 30,
+ 0x04full << 30,
+
+ 0x01aull << 30,
+ 0x01bull << 30,
+ 0x03aull << 30,
+ 0x03bull << 30,
+ 0x05aull << 30,
+ 0x05bull << 30,
+ 0x07aull << 30,
+ 0x07bull << 30,
+ 0x05eull << 30,
+ 0x05full << 30,
+
+ 0x080ull << 30,
+ 0x081ull << 30,
+ 0x082ull << 30,
+ 0x083ull << 30,
+ 0x084ull << 30,
+ 0x085ull << 30,
+ 0x086ull << 30,
+ 0x087ull << 30,
+ 0x088ull << 30,
+ 0x089ull << 30,
+
+ 0x090ull << 30,
+ 0x091ull << 30,
+ 0x092ull << 30,
+ 0x093ull << 30,
+ 0x094ull << 30,
+ 0x095ull << 30,
+ 0x096ull << 30,
+ 0x097ull << 30,
+ 0x098ull << 30,
+ 0x099ull << 30,
+
+ 0x0a0ull << 30,
+ 0x0a1ull << 30,
+ 0x0a2ull << 30,
+ 0x0a3ull << 30,
+ 0x0a4ull << 30,
+ 0x0a5ull << 30,
+ 0x0a6ull << 30,
+ 0x0a7ull << 30,
+ 0x0a8ull << 30,
+ 0x0a9ull << 30,
+
+ 0x0b0ull << 30,
+ 0x0b1ull << 30,
+ 0x0b2ull << 30,
+ 0x0b3ull << 30,
+ 0x0b4ull << 30,
+ 0x0b5ull << 30,
+ 0x0b6ull << 30,
+ 0x0b7ull << 30,
+ 0x0b8ull << 30,
+ 0x0b9ull << 30,
+
+ 0x0c0ull << 30,
+ 0x0c1ull << 30,
+ 0x0c2ull << 30,
+ 0x0c3ull << 30,
+ 0x0c4ull << 30,
+ 0x0c5ull << 30,
+ 0x0c6ull << 30,
+ 0x0c7ull << 30,
+ 0x0c8ull << 30,
+ 0x0c9ull << 30,
+
+ 0x0d0ull << 30,
+ 0x0d1ull << 30,
+ 0x0d2ull << 30,
+ 0x0d3ull << 30,
+ 0x0d4ull << 30,
+ 0x0d5ull << 30,
+ 0x0d6ull << 30,
+ 0x0d7ull << 30,
+ 0x0d8ull << 30,
+ 0x0d9ull << 30,
+
+ 0x0e0ull << 30,
+ 0x0e1ull << 30,
+ 0x0e2ull << 30,
+ 0x0e3ull << 30,
+ 0x0e4ull << 30,
+ 0x0e5ull << 30,
+ 0x0e6ull << 30,
+ 0x0e7ull << 30,
+ 0x0e8ull << 30,
+ 0x0e9ull << 30,
+
+ 0x0f0ull << 30,
+ 0x0f1ull << 30,
+ 0x0f2ull << 30,
+ 0x0f3ull << 30,
+ 0x0f4ull << 30,
+ 0x0f5ull << 30,
+ 0x0f6ull << 30,
+ 0x0f7ull << 30,
+ 0x0f8ull << 30,
+ 0x0f9ull << 30,
+
+ 0x08aull << 30,
+ 0x08bull << 30,
+ 0x0aaull << 30,
+ 0x0abull << 30,
+ 0x0caull << 30,
+ 0x0cbull << 30,
+ 0x0eaull << 30,
+ 0x0ebull << 30,
+ 0x0ceull << 30,
+ 0x0cfull << 30,
+
+ 0x09aull << 30,
+ 0x09bull << 30,
+ 0x0baull << 30,
+ 0x0bbull << 30,
+ 0x0daull << 30,
+ 0x0dbull << 30,
+ 0x0faull << 30,
+ 0x0fbull << 30,
+ 0x0deull << 30,
+ 0x0dfull << 30,
+
+ 0x100ull << 30,
+ 0x101ull << 30,
+ 0x102ull << 30,
+ 0x103ull << 30,
+ 0x104ull << 30,
+ 0x105ull << 30,
+ 0x106ull << 30,
+ 0x107ull << 30,
+ 0x108ull << 30,
+ 0x109ull << 30,
+
+ 0x110ull << 30,
+ 0x111ull << 30,
+ 0x112ull << 30,
+ 0x113ull << 30,
+ 0x114ull << 30,
+ 0x115ull << 30,
+ 0x116ull << 30,
+ 0x117ull << 30,
+ 0x118ull << 30,
+ 0x119ull << 30,
+
+ 0x120ull << 30,
+ 0x121ull << 30,
+ 0x122ull << 30,
+ 0x123ull << 30,
+ 0x124ull << 30,
+ 0x125ull << 30,
+ 0x126ull << 30,
+ 0x127ull << 30,
+ 0x128ull << 30,
+ 0x129ull << 30,
+
+ 0x130ull << 30,
+ 0x131ull << 30,
+ 0x132ull << 30,
+ 0x133ull << 30,
+ 0x134ull << 30,
+ 0x135ull << 30,
+ 0x136ull << 30,
+ 0x137ull << 30,
+ 0x138ull << 30,
+ 0x139ull << 30,
+
+ 0x140ull << 30,
+ 0x141ull << 30,
+ 0x142ull << 30,
+ 0x143ull << 30,
+ 0x144ull << 30,
+ 0x145ull << 30,
+ 0x146ull << 30,
+ 0x147ull << 30,
+ 0x148ull << 30,
+ 0x149ull << 30,
+
+ 0x150ull << 30,
+ 0x151ull << 30,
+ 0x152ull << 30,
+ 0x153ull << 30,
+ 0x154ull << 30,
+ 0x155ull << 30,
+ 0x156ull << 30,
+ 0x157ull << 30,
+ 0x158ull << 30,
+ 0x159ull << 30,
+
+ 0x160ull << 30,
+ 0x161ull << 30,
+ 0x162ull << 30,
+ 0x163ull << 30,
+ 0x164ull << 30,
+ 0x165ull << 30,
+ 0x166ull << 30,
+ 0x167ull << 30,
+ 0x168ull << 30,
+ 0x169ull << 30,
+
+ 0x170ull << 30,
+ 0x171ull << 30,
+ 0x172ull << 30,
+ 0x173ull << 30,
+ 0x174ull << 30,
+ 0x175ull << 30,
+ 0x176ull << 30,
+ 0x177ull << 30,
+ 0x178ull << 30,
+ 0x179ull << 30,
+
+ 0x10aull << 30,
+ 0x10bull << 30,
+ 0x12aull << 30,
+ 0x12bull << 30,
+ 0x14aull << 30,
+ 0x14bull << 30,
+ 0x16aull << 30,
+ 0x16bull << 30,
+ 0x14eull << 30,
+ 0x14full << 30,
+
+ 0x11aull << 30,
+ 0x11bull << 30,
+ 0x13aull << 30,
+ 0x13bull << 30,
+ 0x15aull << 30,
+ 0x15bull << 30,
+ 0x17aull << 30,
+ 0x17bull << 30,
+ 0x15eull << 30,
+ 0x15full << 30,
+
+ 0x180ull << 30,
+ 0x181ull << 30,
+ 0x182ull << 30,
+ 0x183ull << 30,
+ 0x184ull << 30,
+ 0x185ull << 30,
+ 0x186ull << 30,
+ 0x187ull << 30,
+ 0x188ull << 30,
+ 0x189ull << 30,
+
+ 0x190ull << 30,
+ 0x191ull << 30,
+ 0x192ull << 30,
+ 0x193ull << 30,
+ 0x194ull << 30,
+ 0x195ull << 30,
+ 0x196ull << 30,
+ 0x197ull << 30,
+ 0x198ull << 30,
+ 0x199ull << 30,
+
+ 0x1a0ull << 30,
+ 0x1a1ull << 30,
+ 0x1a2ull << 30,
+ 0x1a3ull << 30,
+ 0x1a4ull << 30,
+ 0x1a5ull << 30,
+ 0x1a6ull << 30,
+ 0x1a7ull << 30,
+ 0x1a8ull << 30,
+ 0x1a9ull << 30,
+
+ 0x1b0ull << 30,
+ 0x1b1ull << 30,
+ 0x1b2ull << 30,
+ 0x1b3ull << 30,
+ 0x1b4ull << 30,
+ 0x1b5ull << 30,
+ 0x1b6ull << 30,
+ 0x1b7ull << 30,
+ 0x1b8ull << 30,
+ 0x1b9ull << 30,
+
+ 0x1c0ull << 30,
+ 0x1c1ull << 30,
+ 0x1c2ull << 30,
+ 0x1c3ull << 30,
+ 0x1c4ull << 30,
+ 0x1c5ull << 30,
+ 0x1c6ull << 30,
+ 0x1c7ull << 30,
+ 0x1c8ull << 30,
+ 0x1c9ull << 30,
+
+ 0x1d0ull << 30,
+ 0x1d1ull << 30,
+ 0x1d2ull << 30,
+ 0x1d3ull << 30,
+ 0x1d4ull << 30,
+ 0x1d5ull << 30,
+ 0x1d6ull << 30,
+ 0x1d7ull << 30,
+ 0x1d8ull << 30,
+ 0x1d9ull << 30,
+
+ 0x1e0ull << 30,
+ 0x1e1ull << 30,
+ 0x1e2ull << 30,
+ 0x1e3ull << 30,
+ 0x1e4ull << 30,
+ 0x1e5ull << 30,
+ 0x1e6ull << 30,
+ 0x1e7ull << 30,
+ 0x1e8ull << 30,
+ 0x1e9ull << 30,
+
+ 0x1f0ull << 30,
+ 0x1f1ull << 30,
+ 0x1f2ull << 30,
+ 0x1f3ull << 30,
+ 0x1f4ull << 30,
+ 0x1f5ull << 30,
+ 0x1f6ull << 30,
+ 0x1f7ull << 30,
+ 0x1f8ull << 30,
+ 0x1f9ull << 30,
+
+ 0x18aull << 30,
+ 0x18bull << 30,
+ 0x1aaull << 30,
+ 0x1abull << 30,
+ 0x1caull << 30,
+ 0x1cbull << 30,
+ 0x1eaull << 30,
+ 0x1ebull << 30,
+ 0x1ceull << 30,
+ 0x1cfull << 30,
+
+ 0x19aull << 30,
+ 0x19bull << 30,
+ 0x1baull << 30,
+ 0x1bbull << 30,
+ 0x1daull << 30,
+ 0x1dbull << 30,
+ 0x1faull << 30,
+ 0x1fbull << 30,
+ 0x1deull << 30,
+ 0x1dfull << 30,
+
+ 0x200ull << 30,
+ 0x201ull << 30,
+ 0x202ull << 30,
+ 0x203ull << 30,
+ 0x204ull << 30,
+ 0x205ull << 30,
+ 0x206ull << 30,
+ 0x207ull << 30,
+ 0x208ull << 30,
+ 0x209ull << 30,
+
+ 0x210ull << 30,
+ 0x211ull << 30,
+ 0x212ull << 30,
+ 0x213ull << 30,
+ 0x214ull << 30,
+ 0x215ull << 30,
+ 0x216ull << 30,
+ 0x217ull << 30,
+ 0x218ull << 30,
+ 0x219ull << 30,
+
+ 0x220ull << 30,
+ 0x221ull << 30,
+ 0x222ull << 30,
+ 0x223ull << 30,
+ 0x224ull << 30,
+ 0x225ull << 30,
+ 0x226ull << 30,
+ 0x227ull << 30,
+ 0x228ull << 30,
+ 0x229ull << 30,
+
+ 0x230ull << 30,
+ 0x231ull << 30,
+ 0x232ull << 30,
+ 0x233ull << 30,
+ 0x234ull << 30,
+ 0x235ull << 30,
+ 0x236ull << 30,
+ 0x237ull << 30,
+ 0x238ull << 30,
+ 0x239ull << 30,
+
+ 0x240ull << 30,
+ 0x241ull << 30,
+ 0x242ull << 30,
+ 0x243ull << 30,
+ 0x244ull << 30,
+ 0x245ull << 30,
+ 0x246ull << 30,
+ 0x247ull << 30,
+ 0x248ull << 30,
+ 0x249ull << 30,
+
+ 0x250ull << 30,
+ 0x251ull << 30,
+ 0x252ull << 30,
+ 0x253ull << 30,
+ 0x254ull << 30,
+ 0x255ull << 30,
+ 0x256ull << 30,
+ 0x257ull << 30,
+ 0x258ull << 30,
+ 0x259ull << 30,
+
+ 0x260ull << 30,
+ 0x261ull << 30,
+ 0x262ull << 30,
+ 0x263ull << 30,
+ 0x264ull << 30,
+ 0x265ull << 30,
+ 0x266ull << 30,
+ 0x267ull << 30,
+ 0x268ull << 30,
+ 0x269ull << 30,
+
+ 0x270ull << 30,
+ 0x271ull << 30,
+ 0x272ull << 30,
+ 0x273ull << 30,
+ 0x274ull << 30,
+ 0x275ull << 30,
+ 0x276ull << 30,
+ 0x277ull << 30,
+ 0x278ull << 30,
+ 0x279ull << 30,
+
+ 0x20aull << 30,
+ 0x20bull << 30,
+ 0x22aull << 30,
+ 0x22bull << 30,
+ 0x24aull << 30,
+ 0x24bull << 30,
+ 0x26aull << 30,
+ 0x26bull << 30,
+ 0x24eull << 30,
+ 0x24full << 30,
+
+ 0x21aull << 30,
+ 0x21bull << 30,
+ 0x23aull << 30,
+ 0x23bull << 30,
+ 0x25aull << 30,
+ 0x25bull << 30,
+ 0x27aull << 30,
+ 0x27bull << 30,
+ 0x25eull << 30,
+ 0x25full << 30,
+
+ 0x280ull << 30,
+ 0x281ull << 30,
+ 0x282ull << 30,
+ 0x283ull << 30,
+ 0x284ull << 30,
+ 0x285ull << 30,
+ 0x286ull << 30,
+ 0x287ull << 30,
+ 0x288ull << 30,
+ 0x289ull << 30,
+
+ 0x290ull << 30,
+ 0x291ull << 30,
+ 0x292ull << 30,
+ 0x293ull << 30,
+ 0x294ull << 30,
+ 0x295ull << 30,
+ 0x296ull << 30,
+ 0x297ull << 30,
+ 0x298ull << 30,
+ 0x299ull << 30,
+
+ 0x2a0ull << 30,
+ 0x2a1ull << 30,
+ 0x2a2ull << 30,
+ 0x2a3ull << 30,
+ 0x2a4ull << 30,
+ 0x2a5ull << 30,
+ 0x2a6ull << 30,
+ 0x2a7ull << 30,
+ 0x2a8ull << 30,
+ 0x2a9ull << 30,
+
+ 0x2b0ull << 30,
+ 0x2b1ull << 30,
+ 0x2b2ull << 30,
+ 0x2b3ull << 30,
+ 0x2b4ull << 30,
+ 0x2b5ull << 30,
+ 0x2b6ull << 30,
+ 0x2b7ull << 30,
+ 0x2b8ull << 30,
+ 0x2b9ull << 30,
+
+ 0x2c0ull << 30,
+ 0x2c1ull << 30,
+ 0x2c2ull << 30,
+ 0x2c3ull << 30,
+ 0x2c4ull << 30,
+ 0x2c5ull << 30,
+ 0x2c6ull << 30,
+ 0x2c7ull << 30,
+ 0x2c8ull << 30,
+ 0x2c9ull << 30,
+
+ 0x2d0ull << 30,
+ 0x2d1ull << 30,
+ 0x2d2ull << 30,
+ 0x2d3ull << 30,
+ 0x2d4ull << 30,
+ 0x2d5ull << 30,
+ 0x2d6ull << 30,
+ 0x2d7ull << 30,
+ 0x2d8ull << 30,
+ 0x2d9ull << 30,
+
+ 0x2e0ull << 30,
+ 0x2e1ull << 30,
+ 0x2e2ull << 30,
+ 0x2e3ull << 30,
+ 0x2e4ull << 30,
+ 0x2e5ull << 30,
+ 0x2e6ull << 30,
+ 0x2e7ull << 30,
+ 0x2e8ull << 30,
+ 0x2e9ull << 30,
+
+ 0x2f0ull << 30,
+ 0x2f1ull << 30,
+ 0x2f2ull << 30,
+ 0x2f3ull << 30,
+ 0x2f4ull << 30,
+ 0x2f5ull << 30,
+ 0x2f6ull << 30,
+ 0x2f7ull << 30,
+ 0x2f8ull << 30,
+ 0x2f9ull << 30,
+
+ 0x28aull << 30,
+ 0x28bull << 30,
+ 0x2aaull << 30,
+ 0x2abull << 30,
+ 0x2caull << 30,
+ 0x2cbull << 30,
+ 0x2eaull << 30,
+ 0x2ebull << 30,
+ 0x2ceull << 30,
+ 0x2cfull << 30,
+
+ 0x29aull << 30,
+ 0x29bull << 30,
+ 0x2baull << 30,
+ 0x2bbull << 30,
+ 0x2daull << 30,
+ 0x2dbull << 30,
+ 0x2faull << 30,
+ 0x2fbull << 30,
+ 0x2deull << 30,
+ 0x2dfull << 30,
+
+ 0x300ull << 30,
+ 0x301ull << 30,
+ 0x302ull << 30,
+ 0x303ull << 30,
+ 0x304ull << 30,
+ 0x305ull << 30,
+ 0x306ull << 30,
+ 0x307ull << 30,
+ 0x308ull << 30,
+ 0x309ull << 30,
+
+ 0x310ull << 30,
+ 0x311ull << 30,
+ 0x312ull << 30,
+ 0x313ull << 30,
+ 0x314ull << 30,
+ 0x315ull << 30,
+ 0x316ull << 30,
+ 0x317ull << 30,
+ 0x318ull << 30,
+ 0x319ull << 30,
+
+ 0x320ull << 30,
+ 0x321ull << 30,
+ 0x322ull << 30,
+ 0x323ull << 30,
+ 0x324ull << 30,
+ 0x325ull << 30,
+ 0x326ull << 30,
+ 0x327ull << 30,
+ 0x328ull << 30,
+ 0x329ull << 30,
+
+ 0x330ull << 30,
+ 0x331ull << 30,
+ 0x332ull << 30,
+ 0x333ull << 30,
+ 0x334ull << 30,
+ 0x335ull << 30,
+ 0x336ull << 30,
+ 0x337ull << 30,
+ 0x338ull << 30,
+ 0x339ull << 30,
+
+ 0x340ull << 30,
+ 0x341ull << 30,
+ 0x342ull << 30,
+ 0x343ull << 30,
+ 0x344ull << 30,
+ 0x345ull << 30,
+ 0x346ull << 30,
+ 0x347ull << 30,
+ 0x348ull << 30,
+ 0x349ull << 30,
+
+ 0x350ull << 30,
+ 0x351ull << 30,
+ 0x352ull << 30,
+ 0x353ull << 30,
+ 0x354ull << 30,
+ 0x355ull << 30,
+ 0x356ull << 30,
+ 0x357ull << 30,
+ 0x358ull << 30,
+ 0x359ull << 30,
+
+ 0x360ull << 30,
+ 0x361ull << 30,
+ 0x362ull << 30,
+ 0x363ull << 30,
+ 0x364ull << 30,
+ 0x365ull << 30,
+ 0x366ull << 30,
+ 0x367ull << 30,
+ 0x368ull << 30,
+ 0x369ull << 30,
+
+ 0x370ull << 30,
+ 0x371ull << 30,
+ 0x372ull << 30,
+ 0x373ull << 30,
+ 0x374ull << 30,
+ 0x375ull << 30,
+ 0x376ull << 30,
+ 0x377ull << 30,
+ 0x378ull << 30,
+ 0x379ull << 30,
+
+ 0x30aull << 30,
+ 0x30bull << 30,
+ 0x32aull << 30,
+ 0x32bull << 30,
+ 0x34aull << 30,
+ 0x34bull << 30,
+ 0x36aull << 30,
+ 0x36bull << 30,
+ 0x34eull << 30,
+ 0x34full << 30,
+
+ 0x31aull << 30,
+ 0x31bull << 30,
+ 0x33aull << 30,
+ 0x33bull << 30,
+ 0x35aull << 30,
+ 0x35bull << 30,
+ 0x37aull << 30,
+ 0x37bull << 30,
+ 0x35eull << 30,
+ 0x35full << 30,
+
+ 0x380ull << 30,
+ 0x381ull << 30,
+ 0x382ull << 30,
+ 0x383ull << 30,
+ 0x384ull << 30,
+ 0x385ull << 30,
+ 0x386ull << 30,
+ 0x387ull << 30,
+ 0x388ull << 30,
+ 0x389ull << 30,
+
+ 0x390ull << 30,
+ 0x391ull << 30,
+ 0x392ull << 30,
+ 0x393ull << 30,
+ 0x394ull << 30,
+ 0x395ull << 30,
+ 0x396ull << 30,
+ 0x397ull << 30,
+ 0x398ull << 30,
+ 0x399ull << 30,
+
+ 0x3a0ull << 30,
+ 0x3a1ull << 30,
+ 0x3a2ull << 30,
+ 0x3a3ull << 30,
+ 0x3a4ull << 30,
+ 0x3a5ull << 30,
+ 0x3a6ull << 30,
+ 0x3a7ull << 30,
+ 0x3a8ull << 30,
+ 0x3a9ull << 30,
+
+ 0x3b0ull << 30,
+ 0x3b1ull << 30,
+ 0x3b2ull << 30,
+ 0x3b3ull << 30,
+ 0x3b4ull << 30,
+ 0x3b5ull << 30,
+ 0x3b6ull << 30,
+ 0x3b7ull << 30,
+ 0x3b8ull << 30,
+ 0x3b9ull << 30,
+
+ 0x3c0ull << 30,
+ 0x3c1ull << 30,
+ 0x3c2ull << 30,
+ 0x3c3ull << 30,
+ 0x3c4ull << 30,
+ 0x3c5ull << 30,
+ 0x3c6ull << 30,
+ 0x3c7ull << 30,
+ 0x3c8ull << 30,
+ 0x3c9ull << 30,
+
+ 0x3d0ull << 30,
+ 0x3d1ull << 30,
+ 0x3d2ull << 30,
+ 0x3d3ull << 30,
+ 0x3d4ull << 30,
+ 0x3d5ull << 30,
+ 0x3d6ull << 30,
+ 0x3d7ull << 30,
+ 0x3d8ull << 30,
+ 0x3d9ull << 30,
+
+ 0x3e0ull << 30,
+ 0x3e1ull << 30,
+ 0x3e2ull << 30,
+ 0x3e3ull << 30,
+ 0x3e4ull << 30,
+ 0x3e5ull << 30,
+ 0x3e6ull << 30,
+ 0x3e7ull << 30,
+ 0x3e8ull << 30,
+ 0x3e9ull << 30,
+
+ 0x3f0ull << 30,
+ 0x3f1ull << 30,
+ 0x3f2ull << 30,
+ 0x3f3ull << 30,
+ 0x3f4ull << 30,
+ 0x3f5ull << 30,
+ 0x3f6ull << 30,
+ 0x3f7ull << 30,
+ 0x3f8ull << 30,
+ 0x3f9ull << 30,
+
+ 0x38aull << 30,
+ 0x38bull << 30,
+ 0x3aaull << 30,
+ 0x3abull << 30,
+ 0x3caull << 30,
+ 0x3cbull << 30,
+ 0x3eaull << 30,
+ 0x3ebull << 30,
+ 0x3ceull << 30,
+ 0x3cfull << 30,
+
+ 0x39aull << 30,
+ 0x39bull << 30,
+ 0x3baull << 30,
+ 0x3bbull << 30,
+ 0x3daull << 30,
+ 0x3dbull << 30,
+ 0x3faull << 30,
+ 0x3fbull << 30,
+ 0x3deull << 30,
+ 0x3dfull << 30,
+
+ 0x00cull << 30,
+ 0x00dull << 30,
+ 0x10cull << 30,
+ 0x10dull << 30,
+ 0x20cull << 30,
+ 0x20dull << 30,
+ 0x30cull << 30,
+ 0x30dull << 30,
+ 0x02eull << 30,
+ 0x02full << 30,
+
+ 0x01cull << 30,
+ 0x01dull << 30,
+ 0x11cull << 30,
+ 0x11dull << 30,
+ 0x21cull << 30,
+ 0x21dull << 30,
+ 0x31cull << 30,
+ 0x31dull << 30,
+ 0x03eull << 30,
+ 0x03full << 30,
+
+ 0x02cull << 30,
+ 0x02dull << 30,
+ 0x12cull << 30,
+ 0x12dull << 30,
+ 0x22cull << 30,
+ 0x22dull << 30,
+ 0x32cull << 30,
+ 0x32dull << 30,
+ 0x12eull << 30,
+ 0x12full << 30,
+
+ 0x03cull << 30,
+ 0x03dull << 30,
+ 0x13cull << 30,
+ 0x13dull << 30,
+ 0x23cull << 30,
+ 0x23dull << 30,
+ 0x33cull << 30,
+ 0x33dull << 30,
+ 0x13eull << 30,
+ 0x13full << 30,
+
+ 0x04cull << 30,
+ 0x04dull << 30,
+ 0x14cull << 30,
+ 0x14dull << 30,
+ 0x24cull << 30,
+ 0x24dull << 30,
+ 0x34cull << 30,
+ 0x34dull << 30,
+ 0x22eull << 30,
+ 0x22full << 30,
+
+ 0x05cull << 30,
+ 0x05dull << 30,
+ 0x15cull << 30,
+ 0x15dull << 30,
+ 0x25cull << 30,
+ 0x25dull << 30,
+ 0x35cull << 30,
+ 0x35dull << 30,
+ 0x23eull << 30,
+ 0x23full << 30,
+
+ 0x06cull << 30,
+ 0x06dull << 30,
+ 0x16cull << 30,
+ 0x16dull << 30,
+ 0x26cull << 30,
+ 0x26dull << 30,
+ 0x36cull << 30,
+ 0x36dull << 30,
+ 0x32eull << 30,
+ 0x32full << 30,
+
+ 0x07cull << 30,
+ 0x07dull << 30,
+ 0x17cull << 30,
+ 0x17dull << 30,
+ 0x27cull << 30,
+ 0x27dull << 30,
+ 0x37cull << 30,
+ 0x37dull << 30,
+ 0x33eull << 30,
+ 0x33full << 30,
+
+ 0x00eull << 30,
+ 0x00full << 30,
+ 0x10eull << 30,
+ 0x10full << 30,
+ 0x20eull << 30,
+ 0x20full << 30,
+ 0x30eull << 30,
+ 0x30full << 30,
+ 0x06eull << 30,
+ 0x06full << 30,
+
+ 0x01eull << 30,
+ 0x01full << 30,
+ 0x11eull << 30,
+ 0x11full << 30,
+ 0x21eull << 30,
+ 0x21full << 30,
+ 0x31eull << 30,
+ 0x31full << 30,
+ 0x07eull << 30,
+ 0x07full << 30,
+
+ 0x08cull << 30,
+ 0x08dull << 30,
+ 0x18cull << 30,
+ 0x18dull << 30,
+ 0x28cull << 30,
+ 0x28dull << 30,
+ 0x38cull << 30,
+ 0x38dull << 30,
+ 0x0aeull << 30,
+ 0x0afull << 30,
+
+ 0x09cull << 30,
+ 0x09dull << 30,
+ 0x19cull << 30,
+ 0x19dull << 30,
+ 0x29cull << 30,
+ 0x29dull << 30,
+ 0x39cull << 30,
+ 0x39dull << 30,
+ 0x0beull << 30,
+ 0x0bfull << 30,
+
+ 0x0acull << 30,
+ 0x0adull << 30,
+ 0x1acull << 30,
+ 0x1adull << 30,
+ 0x2acull << 30,
+ 0x2adull << 30,
+ 0x3acull << 30,
+ 0x3adull << 30,
+ 0x1aeull << 30,
+ 0x1afull << 30,
+
+ 0x0bcull << 30,
+ 0x0bdull << 30,
+ 0x1bcull << 30,
+ 0x1bdull << 30,
+ 0x2bcull << 30,
+ 0x2bdull << 30,
+ 0x3bcull << 30,
+ 0x3bdull << 30,
+ 0x1beull << 30,
+ 0x1bfull << 30,
+
+ 0x0ccull << 30,
+ 0x0cdull << 30,
+ 0x1ccull << 30,
+ 0x1cdull << 30,
+ 0x2ccull << 30,
+ 0x2cdull << 30,
+ 0x3ccull << 30,
+ 0x3cdull << 30,
+ 0x2aeull << 30,
+ 0x2afull << 30,
+
+ 0x0dcull << 30,
+ 0x0ddull << 30,
+ 0x1dcull << 30,
+ 0x1ddull << 30,
+ 0x2dcull << 30,
+ 0x2ddull << 30,
+ 0x3dcull << 30,
+ 0x3ddull << 30,
+ 0x2beull << 30,
+ 0x2bfull << 30,
+
+ 0x0ecull << 30,
+ 0x0edull << 30,
+ 0x1ecull << 30,
+ 0x1edull << 30,
+ 0x2ecull << 30,
+ 0x2edull << 30,
+ 0x3ecull << 30,
+ 0x3edull << 30,
+ 0x3aeull << 30,
+ 0x3afull << 30,
+
+ 0x0fcull << 30,
+ 0x0fdull << 30,
+ 0x1fcull << 30,
+ 0x1fdull << 30,
+ 0x2fcull << 30,
+ 0x2fdull << 30,
+ 0x3fcull << 30,
+ 0x3fdull << 30,
+ 0x3beull << 30,
+ 0x3bfull << 30,
+
+ 0x08eull << 30,
+ 0x08full << 30,
+ 0x18eull << 30,
+ 0x18full << 30,
+ 0x28eull << 30,
+ 0x28full << 30,
+ 0x38eull << 30,
+ 0x38full << 30,
+ 0x0eeull << 30,
+ 0x0efull << 30,
+
+ 0x09eull << 30,
+ 0x09full << 30,
+ 0x19eull << 30,
+ 0x19full << 30,
+ 0x29eull << 30,
+ 0x29full << 30,
+ 0x39eull << 30,
+ 0x39full << 30,
+ 0x0feull << 30,
+ 0x0ffull << 30
+};
+
+static const UINT64 b2d5[] = {
+ 0x000ull << 40,
+ 0x001ull << 40,
+ 0x002ull << 40,
+ 0x003ull << 40,
+ 0x004ull << 40,
+ 0x005ull << 40,
+ 0x006ull << 40,
+ 0x007ull << 40,
+ 0x008ull << 40,
+ 0x009ull << 40,
+
+ 0x010ull << 40,
+ 0x011ull << 40,
+ 0x012ull << 40,
+ 0x013ull << 40,
+ 0x014ull << 40,
+ 0x015ull << 40,
+ 0x016ull << 40,
+ 0x017ull << 40,
+ 0x018ull << 40,
+ 0x019ull << 40,
+
+ 0x020ull << 40,
+ 0x021ull << 40,
+ 0x022ull << 40,
+ 0x023ull << 40,
+ 0x024ull << 40,
+ 0x025ull << 40,
+ 0x026ull << 40,
+ 0x027ull << 40,
+ 0x028ull << 40,
+ 0x029ull << 40,
+
+ 0x030ull << 40,
+ 0x031ull << 40,
+ 0x032ull << 40,
+ 0x033ull << 40,
+ 0x034ull << 40,
+ 0x035ull << 40,
+ 0x036ull << 40,
+ 0x037ull << 40,
+ 0x038ull << 40,
+ 0x039ull << 40,
+
+ 0x040ull << 40,
+ 0x041ull << 40,
+ 0x042ull << 40,
+ 0x043ull << 40,
+ 0x044ull << 40,
+ 0x045ull << 40,
+ 0x046ull << 40,
+ 0x047ull << 40,
+ 0x048ull << 40,
+ 0x049ull << 40,
+
+ 0x050ull << 40,
+ 0x051ull << 40,
+ 0x052ull << 40,
+ 0x053ull << 40,
+ 0x054ull << 40,
+ 0x055ull << 40,
+ 0x056ull << 40,
+ 0x057ull << 40,
+ 0x058ull << 40,
+ 0x059ull << 40,
+
+ 0x060ull << 40,
+ 0x061ull << 40,
+ 0x062ull << 40,
+ 0x063ull << 40,
+ 0x064ull << 40,
+ 0x065ull << 40,
+ 0x066ull << 40,
+ 0x067ull << 40,
+ 0x068ull << 40,
+ 0x069ull << 40,
+
+ 0x070ull << 40,
+ 0x071ull << 40,
+ 0x072ull << 40,
+ 0x073ull << 40,
+ 0x074ull << 40,
+ 0x075ull << 40,
+ 0x076ull << 40,
+ 0x077ull << 40,
+ 0x078ull << 40,
+ 0x079ull << 40,
+
+ 0x00aull << 40,
+ 0x00bull << 40,
+ 0x02aull << 40,
+ 0x02bull << 40,
+ 0x04aull << 40,
+ 0x04bull << 40,
+ 0x06aull << 40,
+ 0x06bull << 40,
+ 0x04eull << 40,
+ 0x04full << 40,
+
+ 0x01aull << 40,
+ 0x01bull << 40,
+ 0x03aull << 40,
+ 0x03bull << 40,
+ 0x05aull << 40,
+ 0x05bull << 40,
+ 0x07aull << 40,
+ 0x07bull << 40,
+ 0x05eull << 40,
+ 0x05full << 40,
+
+ 0x080ull << 40,
+ 0x081ull << 40,
+ 0x082ull << 40,
+ 0x083ull << 40,
+ 0x084ull << 40,
+ 0x085ull << 40,
+ 0x086ull << 40,
+ 0x087ull << 40,
+ 0x088ull << 40,
+ 0x089ull << 40,
+
+ 0x090ull << 40,
+ 0x091ull << 40,
+ 0x092ull << 40,
+ 0x093ull << 40,
+ 0x094ull << 40,
+ 0x095ull << 40,
+ 0x096ull << 40,
+ 0x097ull << 40,
+ 0x098ull << 40,
+ 0x099ull << 40,
+
+ 0x0a0ull << 40,
+ 0x0a1ull << 40,
+ 0x0a2ull << 40,
+ 0x0a3ull << 40,
+ 0x0a4ull << 40,
+ 0x0a5ull << 40,
+ 0x0a6ull << 40,
+ 0x0a7ull << 40,
+ 0x0a8ull << 40,
+ 0x0a9ull << 40,
+
+ 0x0b0ull << 40,
+ 0x0b1ull << 40,
+ 0x0b2ull << 40,
+ 0x0b3ull << 40,
+ 0x0b4ull << 40,
+ 0x0b5ull << 40,
+ 0x0b6ull << 40,
+ 0x0b7ull << 40,
+ 0x0b8ull << 40,
+ 0x0b9ull << 40,
+
+ 0x0c0ull << 40,
+ 0x0c1ull << 40,
+ 0x0c2ull << 40,
+ 0x0c3ull << 40,
+ 0x0c4ull << 40,
+ 0x0c5ull << 40,
+ 0x0c6ull << 40,
+ 0x0c7ull << 40,
+ 0x0c8ull << 40,
+ 0x0c9ull << 40,
+
+ 0x0d0ull << 40,
+ 0x0d1ull << 40,
+ 0x0d2ull << 40,
+ 0x0d3ull << 40,
+ 0x0d4ull << 40,
+ 0x0d5ull << 40,
+ 0x0d6ull << 40,
+ 0x0d7ull << 40,
+ 0x0d8ull << 40,
+ 0x0d9ull << 40,
+
+ 0x0e0ull << 40,
+ 0x0e1ull << 40,
+ 0x0e2ull << 40,
+ 0x0e3ull << 40,
+ 0x0e4ull << 40,
+ 0x0e5ull << 40,
+ 0x0e6ull << 40,
+ 0x0e7ull << 40,
+ 0x0e8ull << 40,
+ 0x0e9ull << 40,
+
+ 0x0f0ull << 40,
+ 0x0f1ull << 40,
+ 0x0f2ull << 40,
+ 0x0f3ull << 40,
+ 0x0f4ull << 40,
+ 0x0f5ull << 40,
+ 0x0f6ull << 40,
+ 0x0f7ull << 40,
+ 0x0f8ull << 40,
+ 0x0f9ull << 40,
+
+ 0x08aull << 40,
+ 0x08bull << 40,
+ 0x0aaull << 40,
+ 0x0abull << 40,
+ 0x0caull << 40,
+ 0x0cbull << 40,
+ 0x0eaull << 40,
+ 0x0ebull << 40,
+ 0x0ceull << 40,
+ 0x0cfull << 40,
+
+ 0x09aull << 40,
+ 0x09bull << 40,
+ 0x0baull << 40,
+ 0x0bbull << 40,
+ 0x0daull << 40,
+ 0x0dbull << 40,
+ 0x0faull << 40,
+ 0x0fbull << 40,
+ 0x0deull << 40,
+ 0x0dfull << 40,
+
+ 0x100ull << 40,
+ 0x101ull << 40,
+ 0x102ull << 40,
+ 0x103ull << 40,
+ 0x104ull << 40,
+ 0x105ull << 40,
+ 0x106ull << 40,
+ 0x107ull << 40,
+ 0x108ull << 40,
+ 0x109ull << 40,
+
+ 0x110ull << 40,
+ 0x111ull << 40,
+ 0x112ull << 40,
+ 0x113ull << 40,
+ 0x114ull << 40,
+ 0x115ull << 40,
+ 0x116ull << 40,
+ 0x117ull << 40,
+ 0x118ull << 40,
+ 0x119ull << 40,
+
+ 0x120ull << 40,
+ 0x121ull << 40,
+ 0x122ull << 40,
+ 0x123ull << 40,
+ 0x124ull << 40,
+ 0x125ull << 40,
+ 0x126ull << 40,
+ 0x127ull << 40,
+ 0x128ull << 40,
+ 0x129ull << 40,
+
+ 0x130ull << 40,
+ 0x131ull << 40,
+ 0x132ull << 40,
+ 0x133ull << 40,
+ 0x134ull << 40,
+ 0x135ull << 40,
+ 0x136ull << 40,
+ 0x137ull << 40,
+ 0x138ull << 40,
+ 0x139ull << 40,
+
+ 0x140ull << 40,
+ 0x141ull << 40,
+ 0x142ull << 40,
+ 0x143ull << 40,
+ 0x144ull << 40,
+ 0x145ull << 40,
+ 0x146ull << 40,
+ 0x147ull << 40,
+ 0x148ull << 40,
+ 0x149ull << 40,
+
+ 0x150ull << 40,
+ 0x151ull << 40,
+ 0x152ull << 40,
+ 0x153ull << 40,
+ 0x154ull << 40,
+ 0x155ull << 40,
+ 0x156ull << 40,
+ 0x157ull << 40,
+ 0x158ull << 40,
+ 0x159ull << 40,
+
+ 0x160ull << 40,
+ 0x161ull << 40,
+ 0x162ull << 40,
+ 0x163ull << 40,
+ 0x164ull << 40,
+ 0x165ull << 40,
+ 0x166ull << 40,
+ 0x167ull << 40,
+ 0x168ull << 40,
+ 0x169ull << 40,
+
+ 0x170ull << 40,
+ 0x171ull << 40,
+ 0x172ull << 40,
+ 0x173ull << 40,
+ 0x174ull << 40,
+ 0x175ull << 40,
+ 0x176ull << 40,
+ 0x177ull << 40,
+ 0x178ull << 40,
+ 0x179ull << 40,
+
+ 0x10aull << 40,
+ 0x10bull << 40,
+ 0x12aull << 40,
+ 0x12bull << 40,
+ 0x14aull << 40,
+ 0x14bull << 40,
+ 0x16aull << 40,
+ 0x16bull << 40,
+ 0x14eull << 40,
+ 0x14full << 40,
+
+ 0x11aull << 40,
+ 0x11bull << 40,
+ 0x13aull << 40,
+ 0x13bull << 40,
+ 0x15aull << 40,
+ 0x15bull << 40,
+ 0x17aull << 40,
+ 0x17bull << 40,
+ 0x15eull << 40,
+ 0x15full << 40,
+
+ 0x180ull << 40,
+ 0x181ull << 40,
+ 0x182ull << 40,
+ 0x183ull << 40,
+ 0x184ull << 40,
+ 0x185ull << 40,
+ 0x186ull << 40,
+ 0x187ull << 40,
+ 0x188ull << 40,
+ 0x189ull << 40,
+
+ 0x190ull << 40,
+ 0x191ull << 40,
+ 0x192ull << 40,
+ 0x193ull << 40,
+ 0x194ull << 40,
+ 0x195ull << 40,
+ 0x196ull << 40,
+ 0x197ull << 40,
+ 0x198ull << 40,
+ 0x199ull << 40,
+
+ 0x1a0ull << 40,
+ 0x1a1ull << 40,
+ 0x1a2ull << 40,
+ 0x1a3ull << 40,
+ 0x1a4ull << 40,
+ 0x1a5ull << 40,
+ 0x1a6ull << 40,
+ 0x1a7ull << 40,
+ 0x1a8ull << 40,
+ 0x1a9ull << 40,
+
+ 0x1b0ull << 40,
+ 0x1b1ull << 40,
+ 0x1b2ull << 40,
+ 0x1b3ull << 40,
+ 0x1b4ull << 40,
+ 0x1b5ull << 40,
+ 0x1b6ull << 40,
+ 0x1b7ull << 40,
+ 0x1b8ull << 40,
+ 0x1b9ull << 40,
+
+ 0x1c0ull << 40,
+ 0x1c1ull << 40,
+ 0x1c2ull << 40,
+ 0x1c3ull << 40,
+ 0x1c4ull << 40,
+ 0x1c5ull << 40,
+ 0x1c6ull << 40,
+ 0x1c7ull << 40,
+ 0x1c8ull << 40,
+ 0x1c9ull << 40,
+
+ 0x1d0ull << 40,
+ 0x1d1ull << 40,
+ 0x1d2ull << 40,
+ 0x1d3ull << 40,
+ 0x1d4ull << 40,
+ 0x1d5ull << 40,
+ 0x1d6ull << 40,
+ 0x1d7ull << 40,
+ 0x1d8ull << 40,
+ 0x1d9ull << 40,
+
+ 0x1e0ull << 40,
+ 0x1e1ull << 40,
+ 0x1e2ull << 40,
+ 0x1e3ull << 40,
+ 0x1e4ull << 40,
+ 0x1e5ull << 40,
+ 0x1e6ull << 40,
+ 0x1e7ull << 40,
+ 0x1e8ull << 40,
+ 0x1e9ull << 40,
+
+ 0x1f0ull << 40,
+ 0x1f1ull << 40,
+ 0x1f2ull << 40,
+ 0x1f3ull << 40,
+ 0x1f4ull << 40,
+ 0x1f5ull << 40,
+ 0x1f6ull << 40,
+ 0x1f7ull << 40,
+ 0x1f8ull << 40,
+ 0x1f9ull << 40,
+
+ 0x18aull << 40,
+ 0x18bull << 40,
+ 0x1aaull << 40,
+ 0x1abull << 40,
+ 0x1caull << 40,
+ 0x1cbull << 40,
+ 0x1eaull << 40,
+ 0x1ebull << 40,
+ 0x1ceull << 40,
+ 0x1cfull << 40,
+
+ 0x19aull << 40,
+ 0x19bull << 40,
+ 0x1baull << 40,
+ 0x1bbull << 40,
+ 0x1daull << 40,
+ 0x1dbull << 40,
+ 0x1faull << 40,
+ 0x1fbull << 40,
+ 0x1deull << 40,
+ 0x1dfull << 40,
+
+ 0x200ull << 40,
+ 0x201ull << 40,
+ 0x202ull << 40,
+ 0x203ull << 40,
+ 0x204ull << 40,
+ 0x205ull << 40,
+ 0x206ull << 40,
+ 0x207ull << 40,
+ 0x208ull << 40,
+ 0x209ull << 40,
+
+ 0x210ull << 40,
+ 0x211ull << 40,
+ 0x212ull << 40,
+ 0x213ull << 40,
+ 0x214ull << 40,
+ 0x215ull << 40,
+ 0x216ull << 40,
+ 0x217ull << 40,
+ 0x218ull << 40,
+ 0x219ull << 40,
+
+ 0x220ull << 40,
+ 0x221ull << 40,
+ 0x222ull << 40,
+ 0x223ull << 40,
+ 0x224ull << 40,
+ 0x225ull << 40,
+ 0x226ull << 40,
+ 0x227ull << 40,
+ 0x228ull << 40,
+ 0x229ull << 40,
+
+ 0x230ull << 40,
+ 0x231ull << 40,
+ 0x232ull << 40,
+ 0x233ull << 40,
+ 0x234ull << 40,
+ 0x235ull << 40,
+ 0x236ull << 40,
+ 0x237ull << 40,
+ 0x238ull << 40,
+ 0x239ull << 40,
+
+ 0x240ull << 40,
+ 0x241ull << 40,
+ 0x242ull << 40,
+ 0x243ull << 40,
+ 0x244ull << 40,
+ 0x245ull << 40,
+ 0x246ull << 40,
+ 0x247ull << 40,
+ 0x248ull << 40,
+ 0x249ull << 40,
+
+ 0x250ull << 40,
+ 0x251ull << 40,
+ 0x252ull << 40,
+ 0x253ull << 40,
+ 0x254ull << 40,
+ 0x255ull << 40,
+ 0x256ull << 40,
+ 0x257ull << 40,
+ 0x258ull << 40,
+ 0x259ull << 40,
+
+ 0x260ull << 40,
+ 0x261ull << 40,
+ 0x262ull << 40,
+ 0x263ull << 40,
+ 0x264ull << 40,
+ 0x265ull << 40,
+ 0x266ull << 40,
+ 0x267ull << 40,
+ 0x268ull << 40,
+ 0x269ull << 40,
+
+ 0x270ull << 40,
+ 0x271ull << 40,
+ 0x272ull << 40,
+ 0x273ull << 40,
+ 0x274ull << 40,
+ 0x275ull << 40,
+ 0x276ull << 40,
+ 0x277ull << 40,
+ 0x278ull << 40,
+ 0x279ull << 40,
+
+ 0x20aull << 40,
+ 0x20bull << 40,
+ 0x22aull << 40,
+ 0x22bull << 40,
+ 0x24aull << 40,
+ 0x24bull << 40,
+ 0x26aull << 40,
+ 0x26bull << 40,
+ 0x24eull << 40,
+ 0x24full << 40,
+
+ 0x21aull << 40,
+ 0x21bull << 40,
+ 0x23aull << 40,
+ 0x23bull << 40,
+ 0x25aull << 40,
+ 0x25bull << 40,
+ 0x27aull << 40,
+ 0x27bull << 40,
+ 0x25eull << 40,
+ 0x25full << 40,
+
+ 0x280ull << 40,
+ 0x281ull << 40,
+ 0x282ull << 40,
+ 0x283ull << 40,
+ 0x284ull << 40,
+ 0x285ull << 40,
+ 0x286ull << 40,
+ 0x287ull << 40,
+ 0x288ull << 40,
+ 0x289ull << 40,
+
+ 0x290ull << 40,
+ 0x291ull << 40,
+ 0x292ull << 40,
+ 0x293ull << 40,
+ 0x294ull << 40,
+ 0x295ull << 40,
+ 0x296ull << 40,
+ 0x297ull << 40,
+ 0x298ull << 40,
+ 0x299ull << 40,
+
+ 0x2a0ull << 40,
+ 0x2a1ull << 40,
+ 0x2a2ull << 40,
+ 0x2a3ull << 40,
+ 0x2a4ull << 40,
+ 0x2a5ull << 40,
+ 0x2a6ull << 40,
+ 0x2a7ull << 40,
+ 0x2a8ull << 40,
+ 0x2a9ull << 40,
+
+ 0x2b0ull << 40,
+ 0x2b1ull << 40,
+ 0x2b2ull << 40,
+ 0x2b3ull << 40,
+ 0x2b4ull << 40,
+ 0x2b5ull << 40,
+ 0x2b6ull << 40,
+ 0x2b7ull << 40,
+ 0x2b8ull << 40,
+ 0x2b9ull << 40,
+
+ 0x2c0ull << 40,
+ 0x2c1ull << 40,
+ 0x2c2ull << 40,
+ 0x2c3ull << 40,
+ 0x2c4ull << 40,
+ 0x2c5ull << 40,
+ 0x2c6ull << 40,
+ 0x2c7ull << 40,
+ 0x2c8ull << 40,
+ 0x2c9ull << 40,
+
+ 0x2d0ull << 40,
+ 0x2d1ull << 40,
+ 0x2d2ull << 40,
+ 0x2d3ull << 40,
+ 0x2d4ull << 40,
+ 0x2d5ull << 40,
+ 0x2d6ull << 40,
+ 0x2d7ull << 40,
+ 0x2d8ull << 40,
+ 0x2d9ull << 40,
+
+ 0x2e0ull << 40,
+ 0x2e1ull << 40,
+ 0x2e2ull << 40,
+ 0x2e3ull << 40,
+ 0x2e4ull << 40,
+ 0x2e5ull << 40,
+ 0x2e6ull << 40,
+ 0x2e7ull << 40,
+ 0x2e8ull << 40,
+ 0x2e9ull << 40,
+
+ 0x2f0ull << 40,
+ 0x2f1ull << 40,
+ 0x2f2ull << 40,
+ 0x2f3ull << 40,
+ 0x2f4ull << 40,
+ 0x2f5ull << 40,
+ 0x2f6ull << 40,
+ 0x2f7ull << 40,
+ 0x2f8ull << 40,
+ 0x2f9ull << 40,
+
+ 0x28aull << 40,
+ 0x28bull << 40,
+ 0x2aaull << 40,
+ 0x2abull << 40,
+ 0x2caull << 40,
+ 0x2cbull << 40,
+ 0x2eaull << 40,
+ 0x2ebull << 40,
+ 0x2ceull << 40,
+ 0x2cfull << 40,
+
+ 0x29aull << 40,
+ 0x29bull << 40,
+ 0x2baull << 40,
+ 0x2bbull << 40,
+ 0x2daull << 40,
+ 0x2dbull << 40,
+ 0x2faull << 40,
+ 0x2fbull << 40,
+ 0x2deull << 40,
+ 0x2dfull << 40,
+
+ 0x300ull << 40,
+ 0x301ull << 40,
+ 0x302ull << 40,
+ 0x303ull << 40,
+ 0x304ull << 40,
+ 0x305ull << 40,
+ 0x306ull << 40,
+ 0x307ull << 40,
+ 0x308ull << 40,
+ 0x309ull << 40,
+
+ 0x310ull << 40,
+ 0x311ull << 40,
+ 0x312ull << 40,
+ 0x313ull << 40,
+ 0x314ull << 40,
+ 0x315ull << 40,
+ 0x316ull << 40,
+ 0x317ull << 40,
+ 0x318ull << 40,
+ 0x319ull << 40,
+
+ 0x320ull << 40,
+ 0x321ull << 40,
+ 0x322ull << 40,
+ 0x323ull << 40,
+ 0x324ull << 40,
+ 0x325ull << 40,
+ 0x326ull << 40,
+ 0x327ull << 40,
+ 0x328ull << 40,
+ 0x329ull << 40,
+
+ 0x330ull << 40,
+ 0x331ull << 40,
+ 0x332ull << 40,
+ 0x333ull << 40,
+ 0x334ull << 40,
+ 0x335ull << 40,
+ 0x336ull << 40,
+ 0x337ull << 40,
+ 0x338ull << 40,
+ 0x339ull << 40,
+
+ 0x340ull << 40,
+ 0x341ull << 40,
+ 0x342ull << 40,
+ 0x343ull << 40,
+ 0x344ull << 40,
+ 0x345ull << 40,
+ 0x346ull << 40,
+ 0x347ull << 40,
+ 0x348ull << 40,
+ 0x349ull << 40,
+
+ 0x350ull << 40,
+ 0x351ull << 40,
+ 0x352ull << 40,
+ 0x353ull << 40,
+ 0x354ull << 40,
+ 0x355ull << 40,
+ 0x356ull << 40,
+ 0x357ull << 40,
+ 0x358ull << 40,
+ 0x359ull << 40,
+
+ 0x360ull << 40,
+ 0x361ull << 40,
+ 0x362ull << 40,
+ 0x363ull << 40,
+ 0x364ull << 40,
+ 0x365ull << 40,
+ 0x366ull << 40,
+ 0x367ull << 40,
+ 0x368ull << 40,
+ 0x369ull << 40,
+
+ 0x370ull << 40,
+ 0x371ull << 40,
+ 0x372ull << 40,
+ 0x373ull << 40,
+ 0x374ull << 40,
+ 0x375ull << 40,
+ 0x376ull << 40,
+ 0x377ull << 40,
+ 0x378ull << 40,
+ 0x379ull << 40,
+
+ 0x30aull << 40,
+ 0x30bull << 40,
+ 0x32aull << 40,
+ 0x32bull << 40,
+ 0x34aull << 40,
+ 0x34bull << 40,
+ 0x36aull << 40,
+ 0x36bull << 40,
+ 0x34eull << 40,
+ 0x34full << 40,
+
+ 0x31aull << 40,
+ 0x31bull << 40,
+ 0x33aull << 40,
+ 0x33bull << 40,
+ 0x35aull << 40,
+ 0x35bull << 40,
+ 0x37aull << 40,
+ 0x37bull << 40,
+ 0x35eull << 40,
+ 0x35full << 40,
+
+ 0x380ull << 40,
+ 0x381ull << 40,
+ 0x382ull << 40,
+ 0x383ull << 40,
+ 0x384ull << 40,
+ 0x385ull << 40,
+ 0x386ull << 40,
+ 0x387ull << 40,
+ 0x388ull << 40,
+ 0x389ull << 40,
+
+ 0x390ull << 40,
+ 0x391ull << 40,
+ 0x392ull << 40,
+ 0x393ull << 40,
+ 0x394ull << 40,
+ 0x395ull << 40,
+ 0x396ull << 40,
+ 0x397ull << 40,
+ 0x398ull << 40,
+ 0x399ull << 40,
+
+ 0x3a0ull << 40,
+ 0x3a1ull << 40,
+ 0x3a2ull << 40,
+ 0x3a3ull << 40,
+ 0x3a4ull << 40,
+ 0x3a5ull << 40,
+ 0x3a6ull << 40,
+ 0x3a7ull << 40,
+ 0x3a8ull << 40,
+ 0x3a9ull << 40,
+
+ 0x3b0ull << 40,
+ 0x3b1ull << 40,
+ 0x3b2ull << 40,
+ 0x3b3ull << 40,
+ 0x3b4ull << 40,
+ 0x3b5ull << 40,
+ 0x3b6ull << 40,
+ 0x3b7ull << 40,
+ 0x3b8ull << 40,
+ 0x3b9ull << 40,
+
+ 0x3c0ull << 40,
+ 0x3c1ull << 40,
+ 0x3c2ull << 40,
+ 0x3c3ull << 40,
+ 0x3c4ull << 40,
+ 0x3c5ull << 40,
+ 0x3c6ull << 40,
+ 0x3c7ull << 40,
+ 0x3c8ull << 40,
+ 0x3c9ull << 40,
+
+ 0x3d0ull << 40,
+ 0x3d1ull << 40,
+ 0x3d2ull << 40,
+ 0x3d3ull << 40,
+ 0x3d4ull << 40,
+ 0x3d5ull << 40,
+ 0x3d6ull << 40,
+ 0x3d7ull << 40,
+ 0x3d8ull << 40,
+ 0x3d9ull << 40,
+
+ 0x3e0ull << 40,
+ 0x3e1ull << 40,
+ 0x3e2ull << 40,
+ 0x3e3ull << 40,
+ 0x3e4ull << 40,
+ 0x3e5ull << 40,
+ 0x3e6ull << 40,
+ 0x3e7ull << 40,
+ 0x3e8ull << 40,
+ 0x3e9ull << 40,
+
+ 0x3f0ull << 40,
+ 0x3f1ull << 40,
+ 0x3f2ull << 40,
+ 0x3f3ull << 40,
+ 0x3f4ull << 40,
+ 0x3f5ull << 40,
+ 0x3f6ull << 40,
+ 0x3f7ull << 40,
+ 0x3f8ull << 40,
+ 0x3f9ull << 40,
+
+ 0x38aull << 40,
+ 0x38bull << 40,
+ 0x3aaull << 40,
+ 0x3abull << 40,
+ 0x3caull << 40,
+ 0x3cbull << 40,
+ 0x3eaull << 40,
+ 0x3ebull << 40,
+ 0x3ceull << 40,
+ 0x3cfull << 40,
+
+ 0x39aull << 40,
+ 0x39bull << 40,
+ 0x3baull << 40,
+ 0x3bbull << 40,
+ 0x3daull << 40,
+ 0x3dbull << 40,
+ 0x3faull << 40,
+ 0x3fbull << 40,
+ 0x3deull << 40,
+ 0x3dfull << 40,
+
+ 0x00cull << 40,
+ 0x00dull << 40,
+ 0x10cull << 40,
+ 0x10dull << 40,
+ 0x20cull << 40,
+ 0x20dull << 40,
+ 0x30cull << 40,
+ 0x30dull << 40,
+ 0x02eull << 40,
+ 0x02full << 40,
+
+ 0x01cull << 40,
+ 0x01dull << 40,
+ 0x11cull << 40,
+ 0x11dull << 40,
+ 0x21cull << 40,
+ 0x21dull << 40,
+ 0x31cull << 40,
+ 0x31dull << 40,
+ 0x03eull << 40,
+ 0x03full << 40,
+
+ 0x02cull << 40,
+ 0x02dull << 40,
+ 0x12cull << 40,
+ 0x12dull << 40,
+ 0x22cull << 40,
+ 0x22dull << 40,
+ 0x32cull << 40,
+ 0x32dull << 40,
+ 0x12eull << 40,
+ 0x12full << 40,
+
+ 0x03cull << 40,
+ 0x03dull << 40,
+ 0x13cull << 40,
+ 0x13dull << 40,
+ 0x23cull << 40,
+ 0x23dull << 40,
+ 0x33cull << 40,
+ 0x33dull << 40,
+ 0x13eull << 40,
+ 0x13full << 40,
+
+ 0x04cull << 40,
+ 0x04dull << 40,
+ 0x14cull << 40,
+ 0x14dull << 40,
+ 0x24cull << 40,
+ 0x24dull << 40,
+ 0x34cull << 40,
+ 0x34dull << 40,
+ 0x22eull << 40,
+ 0x22full << 40,
+
+ 0x05cull << 40,
+ 0x05dull << 40,
+ 0x15cull << 40,
+ 0x15dull << 40,
+ 0x25cull << 40,
+ 0x25dull << 40,
+ 0x35cull << 40,
+ 0x35dull << 40,
+ 0x23eull << 40,
+ 0x23full << 40,
+
+ 0x06cull << 40,
+ 0x06dull << 40,
+ 0x16cull << 40,
+ 0x16dull << 40,
+ 0x26cull << 40,
+ 0x26dull << 40,
+ 0x36cull << 40,
+ 0x36dull << 40,
+ 0x32eull << 40,
+ 0x32full << 40,
+
+ 0x07cull << 40,
+ 0x07dull << 40,
+ 0x17cull << 40,
+ 0x17dull << 40,
+ 0x27cull << 40,
+ 0x27dull << 40,
+ 0x37cull << 40,
+ 0x37dull << 40,
+ 0x33eull << 40,
+ 0x33full << 40,
+
+ 0x00eull << 40,
+ 0x00full << 40,
+ 0x10eull << 40,
+ 0x10full << 40,
+ 0x20eull << 40,
+ 0x20full << 40,
+ 0x30eull << 40,
+ 0x30full << 40,
+ 0x06eull << 40,
+ 0x06full << 40,
+
+ 0x01eull << 40,
+ 0x01full << 40,
+ 0x11eull << 40,
+ 0x11full << 40,
+ 0x21eull << 40,
+ 0x21full << 40,
+ 0x31eull << 40,
+ 0x31full << 40,
+ 0x07eull << 40,
+ 0x07full << 40,
+
+ 0x08cull << 40,
+ 0x08dull << 40,
+ 0x18cull << 40,
+ 0x18dull << 40,
+ 0x28cull << 40,
+ 0x28dull << 40,
+ 0x38cull << 40,
+ 0x38dull << 40,
+ 0x0aeull << 40,
+ 0x0afull << 40,
+
+ 0x09cull << 40,
+ 0x09dull << 40,
+ 0x19cull << 40,
+ 0x19dull << 40,
+ 0x29cull << 40,
+ 0x29dull << 40,
+ 0x39cull << 40,
+ 0x39dull << 40,
+ 0x0beull << 40,
+ 0x0bfull << 40,
+
+ 0x0acull << 40,
+ 0x0adull << 40,
+ 0x1acull << 40,
+ 0x1adull << 40,
+ 0x2acull << 40,
+ 0x2adull << 40,
+ 0x3acull << 40,
+ 0x3adull << 40,
+ 0x1aeull << 40,
+ 0x1afull << 40,
+
+ 0x0bcull << 40,
+ 0x0bdull << 40,
+ 0x1bcull << 40,
+ 0x1bdull << 40,
+ 0x2bcull << 40,
+ 0x2bdull << 40,
+ 0x3bcull << 40,
+ 0x3bdull << 40,
+ 0x1beull << 40,
+ 0x1bfull << 40,
+
+ 0x0ccull << 40,
+ 0x0cdull << 40,
+ 0x1ccull << 40,
+ 0x1cdull << 40,
+ 0x2ccull << 40,
+ 0x2cdull << 40,
+ 0x3ccull << 40,
+ 0x3cdull << 40,
+ 0x2aeull << 40,
+ 0x2afull << 40,
+
+ 0x0dcull << 40,
+ 0x0ddull << 40,
+ 0x1dcull << 40,
+ 0x1ddull << 40,
+ 0x2dcull << 40,
+ 0x2ddull << 40,
+ 0x3dcull << 40,
+ 0x3ddull << 40,
+ 0x2beull << 40,
+ 0x2bfull << 40,
+
+ 0x0ecull << 40,
+ 0x0edull << 40,
+ 0x1ecull << 40,
+ 0x1edull << 40,
+ 0x2ecull << 40,
+ 0x2edull << 40,
+ 0x3ecull << 40,
+ 0x3edull << 40,
+ 0x3aeull << 40,
+ 0x3afull << 40,
+
+ 0x0fcull << 40,
+ 0x0fdull << 40,
+ 0x1fcull << 40,
+ 0x1fdull << 40,
+ 0x2fcull << 40,
+ 0x2fdull << 40,
+ 0x3fcull << 40,
+ 0x3fdull << 40,
+ 0x3beull << 40,
+ 0x3bfull << 40,
+
+ 0x08eull << 40,
+ 0x08full << 40,
+ 0x18eull << 40,
+ 0x18full << 40,
+ 0x28eull << 40,
+ 0x28full << 40,
+ 0x38eull << 40,
+ 0x38full << 40,
+ 0x0eeull << 40,
+ 0x0efull << 40,
+
+ 0x09eull << 40,
+ 0x09full << 40,
+ 0x19eull << 40,
+ 0x19full << 40,
+ 0x29eull << 40,
+ 0x29full << 40,
+ 0x39eull << 40,
+ 0x39full << 40,
+ 0x0feull << 40,
+ 0x0ffull << 40
+};
+
diff --git a/libdecnumber/bid/decimal128.c b/libdecnumber/bid/decimal128.c
new file mode 100644
index 0000000..1daf5df
--- /dev/null
+++ b/libdecnumber/bid/decimal128.c
@@ -0,0 +1,148 @@
+/* Copyright (C) 2007
+ Free Software Foundation, Inc.
+
+This file is part of GCC.
+
+GCC is free software; you can redistribute it and/or modify it under
+the terms of the GNU General Public License as published by the Free
+Software Foundation; either version 2, or (at your option) any later
+version.
+
+GCC is distributed in the hope that it will be useful, but WITHOUT ANY
+WARRANTY; without even the implied warranty of MERCHANTABILITY or
+FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
+for more details.
+
+You should have received a copy of the GNU General Public License
+along with GCC; see the file COPYING. If not, write to the Free
+Software Foundation, 51 Franklin Street, Fifth Floor, Boston, MA
+02110-1301, USA. */
+
+/* As a special exception, if you link this library with other files,
+ some of which are compiled with GCC, to produce an executable,
+ this library does not by itself cause the resulting executable
+ to be covered by the GNU General Public License.
+ This exception does not however invalidate any other reasons why
+ the executable file might be covered by the GNU General Public License. */
+
+#define decimal128FromString __dpd128FromString
+#define decimal128ToString __dpd128ToString
+#define decimal128ToEngString __dpd128ToEngString
+#define decimal128FromNumber __dpd128FromNumber
+#define decimal128ToNumber __dpd128ToNumber
+
+#include "dpd/decimal128.c"
+
+#undef decimal128FromString
+#undef decimal128ToString
+#undef decimal128ToEngString
+#undef decimal128FromNumber
+#undef decimal128ToNumber
+
+#include "bid-dpd.h"
+
+#ifdef IN_LIBGCC2
+#define decimal128FromString __decimal128FromString
+#define decimal128ToString __decimal128ToString
+#define decimal128ToEngString __decimal128ToEngString
+#define decimal128FromNumber __decimal128FromNumber
+#define decimal128ToNumber __decimal128ToNumber
+#endif
+
+decimal128 *decimal128FromString (decimal128 *, const char *, decContext *);
+char *decimal128ToString (const decimal128 *, char *);
+char *decimal128ToEngString (const decimal128 *, char *);
+decimal128 *decimal128FromNumber (decimal128 *, const decNumber *, decContext *);
+decNumber *decimal128ToNumber (const decimal128 *, decNumber *);
+
+void __host_to_ieee_128 (_Decimal128 in, decimal128 *out);
+void __ieee_to_host_128 (decimal128 in, _Decimal128 *out);
+
+decimal128 *
+decimal128FromNumber (decimal128 *d128, const decNumber *dn,
+ decContext *set)
+{
+ /* decimal128 and _Decimal128 are different types. */
+ union
+ {
+ _Decimal128 _Dec;
+ decimal128 dec;
+ } u;
+
+ __dpd128FromNumber (d128, dn, set);
+
+ /* __dpd128FromNumber returns in big endian. But _dpd_to_bid128 takes
+ host endian. */
+ __ieee_to_host_128 (*d128, &u._Dec);
+
+ /* Convert DPD to BID. */
+ _dpd_to_bid128 (&u._Dec, &u._Dec);
+
+ /* dfp.c is in bid endian. */
+ __host_to_ieee_128 (u._Dec, &u.dec);
+
+ /* d128 is returned as a pointer to _Decimal128 here. */
+ *d128 = u.dec;
+
+ return d128;
+}
+
+decNumber *
+decimal128ToNumber (const decimal128 *bid128, decNumber *dn)
+{
+ /* decimal128 and _Decimal128 are different types. */
+ union
+ {
+ _Decimal128 _Dec;
+ decimal128 dec;
+ } u;
+
+ /* bid128 is a pointer to _Decimal128 in bid endian. But _bid_to_dpd128
+ takes host endian. */
+ __ieee_to_host_128 (*bid128, &u._Dec);
+
+ /* Convert BID to DPD. */
+ _bid_to_dpd128 (&u._Dec, &u._Dec);
+
+ /* __dpd128ToNumber is in bid endian. */
+ __host_to_ieee_128 (u._Dec, &u.dec);
+
+ return __dpd128ToNumber (&u.dec, dn);
+}
+
+char *
+decimal128ToString (const decimal128 *d128, char *string)
+{
+ decNumber dn; /* work */
+ decimal128ToNumber (d128, &dn);
+ decNumberToString (&dn, string);
+ return string;
+}
+
+char *
+decimal128ToEngString (const decimal128 *d128, char *string)
+{
+ decNumber dn; /* work */
+ decimal128ToNumber (d128, &dn);
+ decNumberToEngString (&dn, string);
+ return string;
+}
+
+decimal128 *
+decimal128FromString (decimal128 *result, const char *string,
+ decContext *set)
+{
+ decContext dc; /* work */
+ decNumber dn; /* .. */
+
+ decContextDefault (&dc, DEC_INIT_DECIMAL128); /* no traps, please */
+ dc.round = set->round; /* use supplied rounding */
+
+ decNumberFromString (&dn, string, &dc); /* will round if needed */
+ decimal128FromNumber (result, &dn, &dc);
+ if (dc.status != 0)
+ { /* something happened */
+ decContextSetStatus (set, dc.status); /* .. pass it on */
+ }
+ return result;
+}
diff --git a/libdecnumber/bid/decimal128.h b/libdecnumber/bid/decimal128.h
new file mode 100644
index 0000000..1387352
--- /dev/null
+++ b/libdecnumber/bid/decimal128.h
@@ -0,0 +1 @@
+#include "dpd/decimal128.h"
diff --git a/libdecnumber/bid/decimal128Local.h b/libdecnumber/bid/decimal128Local.h
new file mode 100644
index 0000000..e499d73
--- /dev/null
+++ b/libdecnumber/bid/decimal128Local.h
@@ -0,0 +1 @@
+#include "dpd/decimal128Local.h"
diff --git a/libdecnumber/bid/decimal128Symbols.h b/libdecnumber/bid/decimal128Symbols.h
new file mode 100644
index 0000000..1775711
--- /dev/null
+++ b/libdecnumber/bid/decimal128Symbols.h
@@ -0,0 +1 @@
+#include "dpd/decimal128Symbols.h"
diff --git a/libdecnumber/bid/decimal32.c b/libdecnumber/bid/decimal32.c
new file mode 100644
index 0000000..68e004e
--- /dev/null
+++ b/libdecnumber/bid/decimal32.c
@@ -0,0 +1,148 @@
+/* Copyright (C) 2007
+ Free Software Foundation, Inc.
+
+This file is part of GCC.
+
+GCC is free software; you can redistribute it and/or modify it under
+the terms of the GNU General Public License as published by the Free
+Software Foundation; either version 2, or (at your option) any later
+version.
+
+GCC is distributed in the hope that it will be useful, but WITHOUT ANY
+WARRANTY; without even the implied warranty of MERCHANTABILITY or
+FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
+for more details.
+
+You should have received a copy of the GNU General Public License
+along with GCC; see the file COPYING. If not, write to the Free
+Software Foundation, 51 Franklin Street, Fifth Floor, Boston, MA
+02110-1301, USA. */
+
+/* As a special exception, if you link this library with other files,
+ some of which are compiled with GCC, to produce an executable,
+ this library does not by itself cause the resulting executable
+ to be covered by the GNU General Public License.
+ This exception does not however invalidate any other reasons why
+ the executable file might be covered by the GNU General Public License. */
+
+#define decimal32FromString __dpd32FromString
+#define decimal32ToString __dpd32ToString
+#define decimal32ToEngString __dpd32ToEngString
+#define decimal32FromNumber __dpd32FromNumber
+#define decimal32ToNumber __dpd32ToNumber
+
+#include "dpd/decimal32.c"
+
+#undef decimal32FromString
+#undef decimal32ToString
+#undef decimal32ToEngString
+#undef decimal32FromNumber
+#undef decimal32ToNumber
+
+#include "bid-dpd.h"
+
+#ifdef IN_LIBGCC2
+#define decimal32FromString __decimal32FromString
+#define decimal32ToString __decimal32ToString
+#define decimal32ToEngString __decimal32ToEngString
+#define decimal32FromNumber __decimal32FromNumber
+#define decimal32ToNumber __decimal32ToNumber
+#endif
+
+decimal32 *decimal32FromString (decimal32 *, const char *, decContext *);
+char *decimal32ToString (const decimal32 *, char *);
+char *decimal32ToEngString (const decimal32 *, char *);
+decimal32 *decimal32FromNumber (decimal32 *, const decNumber *, decContext *);
+decNumber *decimal32ToNumber (const decimal32 *, decNumber *);
+
+void __host_to_ieee_32 (_Decimal32 in, decimal32 *out);
+void __ieee_to_host_32 (decimal32 in, _Decimal32 *out);
+
+decimal32 *
+decimal32FromNumber (decimal32 *d32, const decNumber *dn,
+ decContext *set)
+{
+ /* decimal32 and _Decimal32 are different types. */
+ union
+ {
+ _Decimal32 _Dec;
+ decimal32 dec;
+ } u;
+
+ __dpd32FromNumber (d32, dn, set);
+
+ /* __dpd32FromNumber returns in big endian. But _dpd_to_bid32 takes
+ host endian. */
+ __ieee_to_host_32 (*d32, &u._Dec);
+
+ /* Convert DPD to BID. */
+ _dpd_to_bid32 (&u._Dec, &u._Dec);
+
+ /* dfp.c is in bid endian. */
+ __host_to_ieee_32 (u._Dec, &u.dec);
+
+ /* d32 is returned as a pointer to _Decimal32 here. */
+ *d32 = u.dec;
+
+ return d32;
+}
+
+decNumber *
+decimal32ToNumber (const decimal32 *bid32, decNumber *dn)
+{
+ /* decimal32 and _Decimal32 are different types. */
+ union
+ {
+ _Decimal32 _Dec;
+ decimal32 dec;
+ } u;
+
+ /* bid32 is a pointer to _Decimal32 in bid endian. But _bid_to_dpd32
+ takes host endian. */
+ __ieee_to_host_32 (*bid32, &u._Dec);
+
+ /* Convert BID to DPD. */
+ _bid_to_dpd32 (&u._Dec, &u._Dec);
+
+ /* __dpd32ToNumber is in bid endian. */
+ __host_to_ieee_32 (u._Dec, &u.dec);
+
+ return __dpd32ToNumber (&u.dec, dn);
+}
+
+char *
+decimal32ToString (const decimal32 *d32, char *string)
+{
+ decNumber dn; /* work */
+ decimal32ToNumber (d32, &dn);
+ decNumberToString (&dn, string);
+ return string;
+}
+
+char *
+decimal32ToEngString (const decimal32 *d32, char *string)
+{
+ decNumber dn; /* work */
+ decimal32ToNumber (d32, &dn);
+ decNumberToEngString (&dn, string);
+ return string;
+}
+
+decimal32 *
+decimal32FromString (decimal32 *result, const char *string,
+ decContext *set)
+{
+ decContext dc; /* work */
+ decNumber dn; /* .. */
+
+ decContextDefault (&dc, DEC_INIT_DECIMAL32); /* no traps, please */
+ dc.round = set->round; /* use supplied rounding */
+
+ decNumberFromString (&dn, string, &dc); /* will round if needed */
+ decimal32FromNumber (result, &dn, &dc);
+ if (dc.status != 0)
+ { /* something happened */
+ decContextSetStatus (set, dc.status); /* .. pass it on */
+ }
+ return result;
+}
diff --git a/libdecnumber/bid/decimal32.h b/libdecnumber/bid/decimal32.h
new file mode 100644
index 0000000..e12e3b1
--- /dev/null
+++ b/libdecnumber/bid/decimal32.h
@@ -0,0 +1 @@
+#include "dpd/decimal32.h"
diff --git a/libdecnumber/bid/decimal32Symbols.h b/libdecnumber/bid/decimal32Symbols.h
new file mode 100644
index 0000000..a0c4bf8
--- /dev/null
+++ b/libdecnumber/bid/decimal32Symbols.h
@@ -0,0 +1 @@
+#include "dpd/decimal32Symbols.h"
diff --git a/libdecnumber/bid/decimal64.c b/libdecnumber/bid/decimal64.c
new file mode 100644
index 0000000..bdbee38
--- /dev/null
+++ b/libdecnumber/bid/decimal64.c
@@ -0,0 +1,148 @@
+/* Copyright (C) 2007
+ Free Software Foundation, Inc.
+
+This file is part of GCC.
+
+GCC is free software; you can redistribute it and/or modify it under
+the terms of the GNU General Public License as published by the Free
+Software Foundation; either version 2, or (at your option) any later
+version.
+
+GCC is distributed in the hope that it will be useful, but WITHOUT ANY
+WARRANTY; without even the implied warranty of MERCHANTABILITY or
+FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
+for more details.
+
+You should have received a copy of the GNU General Public License
+along with GCC; see the file COPYING. If not, write to the Free
+Software Foundation, 51 Franklin Street, Fifth Floor, Boston, MA
+02110-1301, USA. */
+
+/* As a special exception, if you link this library with other files,
+ some of which are compiled with GCC, to produce an executable,
+ this library does not by itself cause the resulting executable
+ to be covered by the GNU General Public License.
+ This exception does not however invalidate any other reasons why
+ the executable file might be covered by the GNU General Public License. */
+
+#define decimal64FromString __dpd64FromString
+#define decimal64ToString __dpd64ToString
+#define decimal64ToEngString __dpd64ToEngString
+#define decimal64FromNumber __dpd64FromNumber
+#define decimal64ToNumber __dpd64ToNumber
+
+#include "dpd/decimal64.c"
+
+#undef decimal64FromString
+#undef decimal64ToString
+#undef decimal64ToEngString
+#undef decimal64FromNumber
+#undef decimal64ToNumber
+
+#include "bid-dpd.h"
+
+#ifdef IN_LIBGCC2
+#define decimal64FromString __decimal64FromString
+#define decimal64ToString __decimal64ToString
+#define decimal64ToEngString __decimal64ToEngString
+#define decimal64FromNumber __decimal64FromNumber
+#define decimal64ToNumber __decimal64ToNumber
+#endif
+
+decimal64 *decimal64FromString (decimal64 *, const char *, decContext *);
+char *decimal64ToString (const decimal64 *, char *);
+char *decimal64ToEngString (const decimal64 *, char *);
+decimal64 *decimal64FromNumber (decimal64 *, const decNumber *, decContext *);
+decNumber *decimal64ToNumber (const decimal64 *, decNumber *);
+
+void __host_to_ieee_64 (_Decimal64 in, decimal64 *out);
+void __ieee_to_host_64 (decimal64 in, _Decimal64 *out);
+
+decimal64 *
+decimal64FromNumber (decimal64 *d64, const decNumber *dn,
+ decContext *set)
+{
+ /* decimal64 and _Decimal64 are different types. */
+ union
+ {
+ _Decimal64 _Dec;
+ decimal64 dec;
+ } u;
+
+ __dpd64FromNumber (d64, dn, set);
+
+ /* __dpd64FromNumber returns in big endian. But _dpd_to_bid64 takes
+ host endian. */
+ __ieee_to_host_64 (*d64, &u._Dec);
+
+ /* Convert DPD to BID. */
+ _dpd_to_bid64 (&u._Dec, &u._Dec);
+
+ /* dfp.c is in bid endian. */
+ __host_to_ieee_64 (u._Dec, &u.dec);
+
+ /* d64 is returned as a pointer to _Decimal64 here. */
+ *d64 = u.dec;
+
+ return d64;
+}
+
+decNumber *
+decimal64ToNumber (const decimal64 *bid64, decNumber *dn)
+{
+ /* decimal64 and _Decimal64 are different types. */
+ union
+ {
+ _Decimal64 _Dec;
+ decimal64 dec;
+ } u;
+
+ /* bid64 is a pointer to _Decimal64 in bid endian. But _bid_to_dpd64
+ takes host endian. */
+ __ieee_to_host_64 (*bid64, &u._Dec);
+
+ /* Convert BID to DPD. */
+ _bid_to_dpd64 (&u._Dec, &u._Dec);
+
+ /* __dpd64ToNumber is in bid endian. */
+ __host_to_ieee_64 (u._Dec, &u.dec);
+
+ return __dpd64ToNumber (&u.dec, dn);
+}
+
+char *
+decimal64ToString (const decimal64 *d64, char *string)
+{
+ decNumber dn; /* work */
+ decimal64ToNumber (d64, &dn);
+ decNumberToString (&dn, string);
+ return string;
+}
+
+char *
+decimal64ToEngString (const decimal64 *d64, char *string)
+{
+ decNumber dn; /* work */
+ decimal64ToNumber (d64, &dn);
+ decNumberToEngString (&dn, string);
+ return string;
+}
+
+decimal64 *
+decimal64FromString (decimal64 *result, const char *string,
+ decContext *set)
+{
+ decContext dc; /* work */
+ decNumber dn; /* .. */
+
+ decContextDefault (&dc, DEC_INIT_DECIMAL64); /* no traps, please */
+ dc.round = set->round; /* use supplied rounding */
+
+ decNumberFromString (&dn, string, &dc); /* will round if needed */
+ decimal64FromNumber (result, &dn, &dc);
+ if (dc.status != 0)
+ { /* something happened */
+ decContextSetStatus (set, dc.status); /* .. pass it on */
+ }
+ return result;
+}
diff --git a/libdecnumber/bid/decimal64.h b/libdecnumber/bid/decimal64.h
new file mode 100644
index 0000000..94d4d0c
--- /dev/null
+++ b/libdecnumber/bid/decimal64.h
@@ -0,0 +1 @@
+#include "dpd/decimal64.h"
diff --git a/libdecnumber/bid/decimal64Symbols.h b/libdecnumber/bid/decimal64Symbols.h
new file mode 100644
index 0000000..5f3069c
--- /dev/null
+++ b/libdecnumber/bid/decimal64Symbols.h
@@ -0,0 +1 @@
+#include "dpd/decimal64Symbols.h"
diff --git a/libdecnumber/bid/host-ieee128.c b/libdecnumber/bid/host-ieee128.c
new file mode 100644
index 0000000..6d493e5
--- /dev/null
+++ b/libdecnumber/bid/host-ieee128.c
@@ -0,0 +1,48 @@
+/* This is a software decimal floating point library.
+ Copyright (C) 2007 Free Software Foundation, Inc.
+
+This file is part of GCC.
+
+GCC is free software; you can redistribute it and/or modify it under
+the terms of the GNU General Public License as published by the Free
+Software Foundation; either version 2, or (at your option) any later
+version.
+
+In addition to the permissions in the GNU General Public License, the
+Free Software Foundation gives you unlimited permission to link the
+compiled version of this file into combinations with other programs,
+and to distribute those combinations without any restriction coming
+from the use of this file. (The General Public License restrictions
+do apply in other respects; for example, they cover modification of
+the file, and distribution when not linked into a combine
+executable.)
+
+GCC is distributed in the hope that it will be useful, but WITHOUT ANY
+WARRANTY; without even the implied warranty of MERCHANTABILITY or
+FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
+for more details.
+
+You should have received a copy of the GNU General Public License
+along with GCC; see the file COPYING. If not, write to the Free
+Software Foundation, 51 Franklin Street, Fifth Floor, Boston, MA
+02110-1301, USA. */
+
+#include <string.h>
+
+#include "bid-dpd.h"
+#include "decimal128.h"
+
+void __host_to_ieee_128 (_Decimal128 in, decimal128 *out);
+void __ieee_to_host_128 (decimal128 in, _Decimal128 *out);
+
+void
+__host_to_ieee_128 (_Decimal128 in, decimal128 *out)
+{
+ memcpy ((char *) out, (char *) &in, 16);
+}
+
+void
+__ieee_to_host_128 (decimal128 in, _Decimal128 *out)
+{
+ memcpy ((char *) out, (char *) &in, 16);
+}
diff --git a/libdecnumber/bid/host-ieee32.c b/libdecnumber/bid/host-ieee32.c
new file mode 100644
index 0000000..9a59c93
--- /dev/null
+++ b/libdecnumber/bid/host-ieee32.c
@@ -0,0 +1,57 @@
+/* This is a software decimal floating point library.
+ Copyright (C) 2007 Free Software Foundation, Inc.
+
+This file is part of GCC.
+
+GCC is free software; you can redistribute it and/or modify it under
+the terms of the GNU General Public License as published by the Free
+Software Foundation; either version 2, or (at your option) any later
+version.
+
+In addition to the permissions in the GNU General Public License, the
+Free Software Foundation gives you unlimited permission to link the
+compiled version of this file into combinations with other programs,
+and to distribute those combinations without any restriction coming
+from the use of this file. (The General Public License restrictions
+do apply in other respects; for example, they cover modification of
+the file, and distribution when not linked into a combine
+executable.)
+
+GCC is distributed in the hope that it will be useful, but WITHOUT ANY
+WARRANTY; without even the implied warranty of MERCHANTABILITY or
+FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
+for more details.
+
+You should have received a copy of the GNU General Public License
+along with GCC; see the file COPYING. If not, write to the Free
+Software Foundation, 51 Franklin Street, Fifth Floor, Boston, MA
+02110-1301, USA. */
+
+/* This implements IEEE 754R decimal floating point arithmetic, but
+ does not provide a mechanism for setting the rounding mode, or for
+ generating or handling exceptions. Conversions between decimal
+ floating point types and other types depend on C library functions.
+
+ Contributed by Ben Elliston <bje@au.ibm.com>. */
+
+/* The intended way to use this file is to make two copies, add `#define '
+ to one copy, then compile both copies and add them to libgcc.a. */
+
+#include <string.h>
+#include "bid-dpd.h"
+#include "decimal32.h"
+
+void __host_to_ieee_32 (_Decimal32 in, decimal32 *out);
+void __ieee_to_host_32 (decimal32 in, _Decimal32 *out);
+
+void
+__host_to_ieee_32 (_Decimal32 in, decimal32 *out)
+{
+ memcpy ((char *) out, (char *) &in, 4);
+}
+
+void
+__ieee_to_host_32 (decimal32 in, _Decimal32 *out)
+{
+ memcpy ((char *) out, (char *) &in, 4);
+}
diff --git a/libdecnumber/bid/host-ieee64.c b/libdecnumber/bid/host-ieee64.c
new file mode 100644
index 0000000..ac6cd84
--- /dev/null
+++ b/libdecnumber/bid/host-ieee64.c
@@ -0,0 +1,57 @@
+/* This is a software decimal floating point library.
+ Copyright (C) 2007 Free Software Foundation, Inc.
+
+This file is part of GCC.
+
+GCC is free software; you can redistribute it and/or modify it under
+the terms of the GNU General Public License as published by the Free
+Software Foundation; either version 2, or (at your option) any later
+version.
+
+In addition to the permissions in the GNU General Public License, the
+Free Software Foundation gives you unlimited permission to link the
+compiled version of this file into combinations with other programs,
+and to distribute those combinations without any restriction coming
+from the use of this file. (The General Public License restrictions
+do apply in other respects; for example, they cover modification of
+the file, and distribution when not linked into a combine
+executable.)
+
+GCC is distributed in the hope that it will be useful, but WITHOUT ANY
+WARRANTY; without even the implied warranty of MERCHANTABILITY or
+FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
+for more details.
+
+You should have received a copy of the GNU General Public License
+along with GCC; see the file COPYING. If not, write to the Free
+Software Foundation, 51 Franklin Street, Fifth Floor, Boston, MA
+02110-1301, USA. */
+
+/* This implements IEEE 754R decimal floating point arithmetic, but
+ does not provide a mechanism for setting the rounding mode, or for
+ generating or handling exceptions. Conversions between decimal
+ floating point types and other types depend on C library functions.
+
+ Contributed by Ben Elliston <bje@au.ibm.com>. */
+
+/* The intended way to use this file is to make two copies, add `#define '
+ to one copy, then compile both copies and add them to libgcc.a. */
+
+#include <string.h>
+#include "bid-dpd.h"
+#include "decimal64.h"
+
+void __host_to_ieee_64 (_Decimal64 in, decimal64 *out);
+void __ieee_to_host_64 (decimal64 in, _Decimal64 *out);
+
+void
+__host_to_ieee_64 (_Decimal64 in, decimal64 *out)
+{
+ memcpy ((char *) out, (char *) &in, 8);
+}
+
+void
+__ieee_to_host_64 (decimal64 in, _Decimal64 *out)
+{
+ memcpy ((char *) out, (char *) &in, 8);
+}
diff --git a/libdecnumber/config.in b/libdecnumber/config.in
new file mode 100644
index 0000000..b25b9e9
--- /dev/null
+++ b/libdecnumber/config.in
@@ -0,0 +1,80 @@
+/* config.in. Generated from configure.ac by autoheader. */
+
+/* Define to 1 if you have the <ctype.h> header file. */
+#undef HAVE_CTYPE_H
+
+/* Define to 1 if you have the <inttypes.h> header file. */
+#undef HAVE_INTTYPES_H
+
+/* Define to 1 if you have the <memory.h> header file. */
+#undef HAVE_MEMORY_H
+
+/* Define to 1 if you have the <stddef.h> header file. */
+#undef HAVE_STDDEF_H
+
+/* Define to 1 if you have the <stdint.h> header file. */
+#undef HAVE_STDINT_H
+
+/* Define to 1 if you have the <stdio.h> header file. */
+#undef HAVE_STDIO_H
+
+/* Define to 1 if you have the <stdlib.h> header file. */
+#undef HAVE_STDLIB_H
+
+/* Define to 1 if you have the <strings.h> header file. */
+#undef HAVE_STRINGS_H
+
+/* Define to 1 if you have the <string.h> header file. */
+#undef HAVE_STRING_H
+
+/* Define to 1 if you have the <sys/stat.h> header file. */
+#undef HAVE_SYS_STAT_H
+
+/* Define to 1 if you have the <sys/types.h> header file. */
+#undef HAVE_SYS_TYPES_H
+
+/* Define to 1 if you have the <unistd.h> header file. */
+#undef HAVE_UNISTD_H
+
+/* Define to the address where bug reports for this package should be sent. */
+#undef PACKAGE_BUGREPORT
+
+/* Define to the full name of this package. */
+#undef PACKAGE_NAME
+
+/* Define to the full name and version of this package. */
+#undef PACKAGE_STRING
+
+/* Define to the one symbol short name of this package. */
+#undef PACKAGE_TARNAME
+
+/* Define to the version of this package. */
+#undef PACKAGE_VERSION
+
+/* The size of a `char', as computed by sizeof. */
+#undef SIZEOF_CHAR
+
+/* The size of a `int', as computed by sizeof. */
+#undef SIZEOF_INT
+
+/* The size of a `long', as computed by sizeof. */
+#undef SIZEOF_LONG
+
+/* The size of a `short', as computed by sizeof. */
+#undef SIZEOF_SHORT
+
+/* The size of a `void *', as computed by sizeof. */
+#undef SIZEOF_VOID_P
+
+/* Define to 1 if you have the ANSI C header files. */
+#undef STDC_HEADERS
+
+/* Define to 1 if your processor stores words with the most significant byte
+ first (like Motorola and SPARC, unlike Intel and VAX). */
+#undef WORDS_BIGENDIAN
+
+/* Define to empty if `const' does not conform to ANSI C. */
+#undef const
+
+/* Define to `long' if <sys/types.h> does not define. */
+#undef off_t
diff --git a/libdecnumber/configure b/libdecnumber/configure
new file mode 100755
index 0000000..a105bb0
--- /dev/null
+++ b/libdecnumber/configure
@@ -0,0 +1,9329 @@
+#! /bin/sh
+# Guess values for system-dependent variables and create Makefiles.
+# Generated by GNU Autoconf 2.59 for libdecnumber .
+#
+# Report bugs to <gcc-bugs@gcc.gnu.org>.
+#
+# Copyright (C) 2003 Free Software Foundation, Inc.
+# This configure script is free software; the Free Software Foundation
+# gives unlimited permission to copy, distribute and modify it.
+## --------------------- ##
+## M4sh Initialization. ##
+## --------------------- ##
+
+# Be Bourne compatible
+if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then
+ emulate sh
+ NULLCMD=:
+ # Zsh 3.x and 4.x performs word splitting on ${1+"$@"}, which
+ # is contrary to our usage. Disable this feature.
+ alias -g '${1+"$@"}'='"$@"'
+elif test -n "${BASH_VERSION+set}" && (set -o posix) >/dev/null 2>&1; then
+ set -o posix
+fi
+DUALCASE=1; export DUALCASE # for MKS sh
+
+# Support unset when possible.
+if ( (MAIL=60; unset MAIL) || exit) >/dev/null 2>&1; then
+ as_unset=unset
+else
+ as_unset=false
+fi
+
+
+# Work around bugs in pre-3.0 UWIN ksh.
+$as_unset ENV MAIL MAILPATH
+PS1='$ '
+PS2='> '
+PS4='+ '
+
+# NLS nuisances.
+for as_var in \
+ LANG LANGUAGE LC_ADDRESS LC_ALL LC_COLLATE LC_CTYPE LC_IDENTIFICATION \
+ LC_MEASUREMENT LC_MESSAGES LC_MONETARY LC_NAME LC_NUMERIC LC_PAPER \
+ LC_TELEPHONE LC_TIME
+do
+ if (set +x; test -z "`(eval $as_var=C; export $as_var) 2>&1`"); then
+ eval $as_var=C; export $as_var
+ else
+ $as_unset $as_var
+ fi
+done
+
+# Required to use basename.
+if expr a : '\(a\)' >/dev/null 2>&1; then
+ as_expr=expr
+else
+ as_expr=false
+fi
+
+if (basename /) >/dev/null 2>&1 && test "X`basename / 2>&1`" = "X/"; then
+ as_basename=basename
+else
+ as_basename=false
+fi
+
+
+# Name of the executable.
+as_me=`$as_basename "$0" ||
+$as_expr X/"$0" : '.*/\([^/][^/]*\)/*$' \| \
+ X"$0" : 'X\(//\)$' \| \
+ X"$0" : 'X\(/\)$' \| \
+ . : '\(.\)' 2>/dev/null ||
+echo X/"$0" |
+ sed '/^.*\/\([^/][^/]*\)\/*$/{ s//\1/; q; }
+ /^X\/\(\/\/\)$/{ s//\1/; q; }
+ /^X\/\(\/\).*/{ s//\1/; q; }
+ s/.*/./; q'`
+
+
+# PATH needs CR, and LINENO needs CR and PATH.
+# Avoid depending upon Character Ranges.
+as_cr_letters='abcdefghijklmnopqrstuvwxyz'
+as_cr_LETTERS='ABCDEFGHIJKLMNOPQRSTUVWXYZ'
+as_cr_Letters=$as_cr_letters$as_cr_LETTERS
+as_cr_digits='0123456789'
+as_cr_alnum=$as_cr_Letters$as_cr_digits
+
+# The user is always right.
+if test "${PATH_SEPARATOR+set}" != set; then
+ echo "#! /bin/sh" >conf$$.sh
+ echo "exit 0" >>conf$$.sh
+ chmod +x conf$$.sh
+ if (PATH="/nonexistent;."; conf$$.sh) >/dev/null 2>&1; then
+ PATH_SEPARATOR=';'
+ else
+ PATH_SEPARATOR=:
+ fi
+ rm -f conf$$.sh
+fi
+
+
+ as_lineno_1=$LINENO
+ as_lineno_2=$LINENO
+ as_lineno_3=`(expr $as_lineno_1 + 1) 2>/dev/null`
+ test "x$as_lineno_1" != "x$as_lineno_2" &&
+ test "x$as_lineno_3" = "x$as_lineno_2" || {
+ # Find who we are. Look in the path if we contain no path at all
+ # relative or not.
+ case $0 in
+ *[\\/]* ) as_myself=$0 ;;
+ *) as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ test -r "$as_dir/$0" && as_myself=$as_dir/$0 && break
+done
+
+ ;;
+ esac
+ # We did not find ourselves, most probably we were run as `sh COMMAND'
+ # in which case we are not to be found in the path.
+ if test "x$as_myself" = x; then
+ as_myself=$0
+ fi
+ if test ! -f "$as_myself"; then
+ { echo "$as_me: error: cannot find myself; rerun with an absolute path" >&2
+ { (exit 1); exit 1; }; }
+ fi
+ case $CONFIG_SHELL in
+ '')
+ as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in /bin$PATH_SEPARATOR/usr/bin$PATH_SEPARATOR$PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for as_base in sh bash ksh sh5; do
+ case $as_dir in
+ /*)
+ if ("$as_dir/$as_base" -c '
+ as_lineno_1=$LINENO
+ as_lineno_2=$LINENO
+ as_lineno_3=`(expr $as_lineno_1 + 1) 2>/dev/null`
+ test "x$as_lineno_1" != "x$as_lineno_2" &&
+ test "x$as_lineno_3" = "x$as_lineno_2" ') 2>/dev/null; then
+ $as_unset BASH_ENV || test "${BASH_ENV+set}" != set || { BASH_ENV=; export BASH_ENV; }
+ $as_unset ENV || test "${ENV+set}" != set || { ENV=; export ENV; }
+ CONFIG_SHELL=$as_dir/$as_base
+ export CONFIG_SHELL
+ exec "$CONFIG_SHELL" "$0" ${1+"$@"}
+ fi;;
+ esac
+ done
+done
+;;
+ esac
+
+ # Create $as_me.lineno as a copy of $as_myself, but with $LINENO
+ # uniformly replaced by the line number. The first 'sed' inserts a
+ # line-number line before each line; the second 'sed' does the real
+ # work. The second script uses 'N' to pair each line-number line
+ # with the numbered line, and appends trailing '-' during
+ # substitution so that $LINENO is not a special case at line end.
+ # (Raja R Harinath suggested sed '=', and Paul Eggert wrote the
+ # second 'sed' script. Blame Lee E. McMahon for sed's syntax. :-)
+ sed '=' <$as_myself |
+ sed '
+ N
+ s,$,-,
+ : loop
+ s,^\(['$as_cr_digits']*\)\(.*\)[$]LINENO\([^'$as_cr_alnum'_]\),\1\2\1\3,
+ t loop
+ s,-$,,
+ s,^['$as_cr_digits']*\n,,
+ ' >$as_me.lineno &&
+ chmod +x $as_me.lineno ||
+ { echo "$as_me: error: cannot create $as_me.lineno; rerun with a POSIX shell" >&2
+ { (exit 1); exit 1; }; }
+
+ # Don't try to exec as it changes $[0], causing all sort of problems
+ # (the dirname of $[0] is not the place where we might find the
+ # original and so on. Autoconf is especially sensible to this).
+ . ./$as_me.lineno
+ # Exit status is that of the last command.
+ exit
+}
+
+
+case `echo "testing\c"; echo 1,2,3`,`echo -n testing; echo 1,2,3` in
+ *c*,-n*) ECHO_N= ECHO_C='
+' ECHO_T=' ' ;;
+ *c*,* ) ECHO_N=-n ECHO_C= ECHO_T= ;;
+ *) ECHO_N= ECHO_C='\c' ECHO_T= ;;
+esac
+
+if expr a : '\(a\)' >/dev/null 2>&1; then
+ as_expr=expr
+else
+ as_expr=false
+fi
+
+rm -f conf$$ conf$$.exe conf$$.file
+echo >conf$$.file
+if ln -s conf$$.file conf$$ 2>/dev/null; then
+ # We could just check for DJGPP; but this test a) works b) is more generic
+ # and c) will remain valid once DJGPP supports symlinks (DJGPP 2.04).
+ if test -f conf$$.exe; then
+ # Don't use ln at all; we don't have any links
+ as_ln_s='cp -p'
+ else
+ as_ln_s='ln -s'
+ fi
+elif ln conf$$.file conf$$ 2>/dev/null; then
+ as_ln_s=ln
+else
+ as_ln_s='cp -p'
+fi
+rm -f conf$$ conf$$.exe conf$$.file
+
+if mkdir -p . 2>/dev/null; then
+ as_mkdir_p=:
+else
+ test -d ./-p && rmdir ./-p
+ as_mkdir_p=false
+fi
+
+as_executable_p="test -f"
+
+# Sed expression to map a string onto a valid CPP name.
+as_tr_cpp="eval sed 'y%*$as_cr_letters%P$as_cr_LETTERS%;s%[^_$as_cr_alnum]%_%g'"
+
+# Sed expression to map a string onto a valid variable name.
+as_tr_sh="eval sed 'y%*+%pp%;s%[^_$as_cr_alnum]%_%g'"
+
+
+# IFS
+# We need space, tab and new line, in precisely that order.
+as_nl='
+'
+IFS=" $as_nl"
+
+# CDPATH.
+$as_unset CDPATH
+
+
+# Name of the host.
+# hostname on some systems (SVR3.2, Linux) returns a bogus exit status,
+# so uname gets run too.
+ac_hostname=`(hostname || uname -n) 2>/dev/null | sed 1q`
+
+exec 6>&1
+
+#
+# Initializations.
+#
+ac_default_prefix=/usr/local
+ac_config_libobj_dir=.
+cross_compiling=no
+subdirs=
+MFLAGS=
+MAKEFLAGS=
+SHELL=${CONFIG_SHELL-/bin/sh}
+
+# Maximum number of lines to put in a shell here document.
+# This variable seems obsolete. It should probably be removed, and
+# only ac_max_sed_lines should be used.
+: ${ac_max_here_lines=38}
+
+# Identity of this package.
+PACKAGE_NAME='libdecnumber'
+PACKAGE_TARNAME='libdecnumber'
+PACKAGE_VERSION=' '
+PACKAGE_STRING='libdecnumber '
+PACKAGE_BUGREPORT='gcc-bugs@gcc.gnu.org'
+
+ac_unique_file="decNumber.h"
+# Factoring default headers for most tests.
+ac_includes_default="\
+#include <stdio.h>
+#if HAVE_SYS_TYPES_H
+# include <sys/types.h>
+#endif
+#if HAVE_SYS_STAT_H
+# include <sys/stat.h>
+#endif
+#if STDC_HEADERS
+# include <stdlib.h>
+# include <stddef.h>
+#else
+# if HAVE_STDLIB_H
+# include <stdlib.h>
+# endif
+#endif
+#if HAVE_STRING_H
+# if !STDC_HEADERS && HAVE_MEMORY_H
+# include <memory.h>
+# endif
+# include <string.h>
+#endif
+#if HAVE_STRINGS_H
+# include <strings.h>
+#endif
+#if HAVE_INTTYPES_H
+# include <inttypes.h>
+#else
+# if HAVE_STDINT_H
+# include <stdint.h>
+# endif
+#endif
+#if HAVE_UNISTD_H
+# include <unistd.h>
+#endif"
+
+ac_subst_vars='SHELL PATH_SEPARATOR PACKAGE_NAME PACKAGE_TARNAME PACKAGE_VERSION PACKAGE_STRING PACKAGE_BUGREPORT exec_prefix prefix program_transform_name bindir sbindir libexecdir datadir sysconfdir sharedstatedir localstatedir libdir includedir oldincludedir infodir mandir build_alias host_alias target_alias DEFS ECHO_C ECHO_N ECHO_T LIBS SET_MAKE CC CFLAGS LDFLAGS CPPFLAGS ac_ct_CC EXEEXT OBJEXT RANLIB ac_ct_RANLIB ACLOCAL AUTOCONF AUTOHEADER WARN_CFLAGS WARN_PEDANTIC WERROR CPP EGREP MAINT build build_cpu build_vendor build_os host host_cpu host_vendor host_os target target_cpu target_vendor target_os enable_decimal_float LIBOBJS LTLIBOBJS'
+ac_subst_files=''
+
+# Initialize some variables set by options.
+ac_init_help=
+ac_init_version=false
+# The variables have the same names as the options, with
+# dashes changed to underlines.
+cache_file=/dev/null
+exec_prefix=NONE
+no_create=
+no_recursion=
+prefix=NONE
+program_prefix=NONE
+program_suffix=NONE
+program_transform_name=s,x,x,
+silent=
+site=
+srcdir=
+verbose=
+x_includes=NONE
+x_libraries=NONE
+
+# Installation directory options.
+# These are left unexpanded so users can "make install exec_prefix=/foo"
+# and all the variables that are supposed to be based on exec_prefix
+# by default will actually change.
+# Use braces instead of parens because sh, perl, etc. also accept them.
+bindir='${exec_prefix}/bin'
+sbindir='${exec_prefix}/sbin'
+libexecdir='${exec_prefix}/libexec'
+datadir='${prefix}/share'
+sysconfdir='${prefix}/etc'
+sharedstatedir='${prefix}/com'
+localstatedir='${prefix}/var'
+libdir='${exec_prefix}/lib'
+includedir='${prefix}/include'
+oldincludedir='/usr/include'
+infodir='${prefix}/info'
+mandir='${prefix}/man'
+
+ac_prev=
+for ac_option
+do
+ # If the previous option needs an argument, assign it.
+ if test -n "$ac_prev"; then
+ eval "$ac_prev=\$ac_option"
+ ac_prev=
+ continue
+ fi
+
+ ac_optarg=`expr "x$ac_option" : 'x[^=]*=\(.*\)'`
+
+ # Accept the important Cygnus configure options, so we can diagnose typos.
+
+ case $ac_option in
+
+ -bindir | --bindir | --bindi | --bind | --bin | --bi)
+ ac_prev=bindir ;;
+ -bindir=* | --bindir=* | --bindi=* | --bind=* | --bin=* | --bi=*)
+ bindir=$ac_optarg ;;
+
+ -build | --build | --buil | --bui | --bu)
+ ac_prev=build_alias ;;
+ -build=* | --build=* | --buil=* | --bui=* | --bu=*)
+ build_alias=$ac_optarg ;;
+
+ -cache-file | --cache-file | --cache-fil | --cache-fi \
+ | --cache-f | --cache- | --cache | --cach | --cac | --ca | --c)
+ ac_prev=cache_file ;;
+ -cache-file=* | --cache-file=* | --cache-fil=* | --cache-fi=* \
+ | --cache-f=* | --cache-=* | --cache=* | --cach=* | --cac=* | --ca=* | --c=*)
+ cache_file=$ac_optarg ;;
+
+ --config-cache | -C)
+ cache_file=config.cache ;;
+
+ -datadir | --datadir | --datadi | --datad | --data | --dat | --da)
+ ac_prev=datadir ;;
+ -datadir=* | --datadir=* | --datadi=* | --datad=* | --data=* | --dat=* \
+ | --da=*)
+ datadir=$ac_optarg ;;
+
+ -disable-* | --disable-*)
+ ac_feature=`expr "x$ac_option" : 'x-*disable-\(.*\)'`
+ # Reject names that are not valid shell variable names.
+ expr "x$ac_feature" : ".*[^-_$as_cr_alnum]" >/dev/null &&
+ { echo "$as_me: error: invalid feature name: $ac_feature" >&2
+ { (exit 1); exit 1; }; }
+ ac_feature=`echo $ac_feature | sed 's/-/_/g'`
+ eval "enable_$ac_feature=no" ;;
+
+ -enable-* | --enable-*)
+ ac_feature=`expr "x$ac_option" : 'x-*enable-\([^=]*\)'`
+ # Reject names that are not valid shell variable names.
+ expr "x$ac_feature" : ".*[^-_$as_cr_alnum]" >/dev/null &&
+ { echo "$as_me: error: invalid feature name: $ac_feature" >&2
+ { (exit 1); exit 1; }; }
+ ac_feature=`echo $ac_feature | sed 's/-/_/g'`
+ case $ac_option in
+ *=*) ac_optarg=`echo "$ac_optarg" | sed "s/'/'\\\\\\\\''/g"`;;
+ *) ac_optarg=yes ;;
+ esac
+ eval "enable_$ac_feature='$ac_optarg'" ;;
+
+ -exec-prefix | --exec_prefix | --exec-prefix | --exec-prefi \
+ | --exec-pref | --exec-pre | --exec-pr | --exec-p | --exec- \
+ | --exec | --exe | --ex)
+ ac_prev=exec_prefix ;;
+ -exec-prefix=* | --exec_prefix=* | --exec-prefix=* | --exec-prefi=* \
+ | --exec-pref=* | --exec-pre=* | --exec-pr=* | --exec-p=* | --exec-=* \
+ | --exec=* | --exe=* | --ex=*)
+ exec_prefix=$ac_optarg ;;
+
+ -gas | --gas | --ga | --g)
+ # Obsolete; use --with-gas.
+ with_gas=yes ;;
+
+ -help | --help | --hel | --he | -h)
+ ac_init_help=long ;;
+ -help=r* | --help=r* | --hel=r* | --he=r* | -hr*)
+ ac_init_help=recursive ;;
+ -help=s* | --help=s* | --hel=s* | --he=s* | -hs*)
+ ac_init_help=short ;;
+
+ -host | --host | --hos | --ho)
+ ac_prev=host_alias ;;
+ -host=* | --host=* | --hos=* | --ho=*)
+ host_alias=$ac_optarg ;;
+
+ -includedir | --includedir | --includedi | --included | --include \
+ | --includ | --inclu | --incl | --inc)
+ ac_prev=includedir ;;
+ -includedir=* | --includedir=* | --includedi=* | --included=* | --include=* \
+ | --includ=* | --inclu=* | --incl=* | --inc=*)
+ includedir=$ac_optarg ;;
+
+ -infodir | --infodir | --infodi | --infod | --info | --inf)
+ ac_prev=infodir ;;
+ -infodir=* | --infodir=* | --infodi=* | --infod=* | --info=* | --inf=*)
+ infodir=$ac_optarg ;;
+
+ -libdir | --libdir | --libdi | --libd)
+ ac_prev=libdir ;;
+ -libdir=* | --libdir=* | --libdi=* | --libd=*)
+ libdir=$ac_optarg ;;
+
+ -libexecdir | --libexecdir | --libexecdi | --libexecd | --libexec \
+ | --libexe | --libex | --libe)
+ ac_prev=libexecdir ;;
+ -libexecdir=* | --libexecdir=* | --libexecdi=* | --libexecd=* | --libexec=* \
+ | --libexe=* | --libex=* | --libe=*)
+ libexecdir=$ac_optarg ;;
+
+ -localstatedir | --localstatedir | --localstatedi | --localstated \
+ | --localstate | --localstat | --localsta | --localst \
+ | --locals | --local | --loca | --loc | --lo)
+ ac_prev=localstatedir ;;
+ -localstatedir=* | --localstatedir=* | --localstatedi=* | --localstated=* \
+ | --localstate=* | --localstat=* | --localsta=* | --localst=* \
+ | --locals=* | --local=* | --loca=* | --loc=* | --lo=*)
+ localstatedir=$ac_optarg ;;
+
+ -mandir | --mandir | --mandi | --mand | --man | --ma | --m)
+ ac_prev=mandir ;;
+ -mandir=* | --mandir=* | --mandi=* | --mand=* | --man=* | --ma=* | --m=*)
+ mandir=$ac_optarg ;;
+
+ -nfp | --nfp | --nf)
+ # Obsolete; use --without-fp.
+ with_fp=no ;;
+
+ -no-create | --no-create | --no-creat | --no-crea | --no-cre \
+ | --no-cr | --no-c | -n)
+ no_create=yes ;;
+
+ -no-recursion | --no-recursion | --no-recursio | --no-recursi \
+ | --no-recurs | --no-recur | --no-recu | --no-rec | --no-re | --no-r)
+ no_recursion=yes ;;
+
+ -oldincludedir | --oldincludedir | --oldincludedi | --oldincluded \
+ | --oldinclude | --oldinclud | --oldinclu | --oldincl | --oldinc \
+ | --oldin | --oldi | --old | --ol | --o)
+ ac_prev=oldincludedir ;;
+ -oldincludedir=* | --oldincludedir=* | --oldincludedi=* | --oldincluded=* \
+ | --oldinclude=* | --oldinclud=* | --oldinclu=* | --oldincl=* | --oldinc=* \
+ | --oldin=* | --oldi=* | --old=* | --ol=* | --o=*)
+ oldincludedir=$ac_optarg ;;
+
+ -prefix | --prefix | --prefi | --pref | --pre | --pr | --p)
+ ac_prev=prefix ;;
+ -prefix=* | --prefix=* | --prefi=* | --pref=* | --pre=* | --pr=* | --p=*)
+ prefix=$ac_optarg ;;
+
+ -program-prefix | --program-prefix | --program-prefi | --program-pref \
+ | --program-pre | --program-pr | --program-p)
+ ac_prev=program_prefix ;;
+ -program-prefix=* | --program-prefix=* | --program-prefi=* \
+ | --program-pref=* | --program-pre=* | --program-pr=* | --program-p=*)
+ program_prefix=$ac_optarg ;;
+
+ -program-suffix | --program-suffix | --program-suffi | --program-suff \
+ | --program-suf | --program-su | --program-s)
+ ac_prev=program_suffix ;;
+ -program-suffix=* | --program-suffix=* | --program-suffi=* \
+ | --program-suff=* | --program-suf=* | --program-su=* | --program-s=*)
+ program_suffix=$ac_optarg ;;
+
+ -program-transform-name | --program-transform-name \
+ | --program-transform-nam | --program-transform-na \
+ | --program-transform-n | --program-transform- \
+ | --program-transform | --program-transfor \
+ | --program-transfo | --program-transf \
+ | --program-trans | --program-tran \
+ | --progr-tra | --program-tr | --program-t)
+ ac_prev=program_transform_name ;;
+ -program-transform-name=* | --program-transform-name=* \
+ | --program-transform-nam=* | --program-transform-na=* \
+ | --program-transform-n=* | --program-transform-=* \
+ | --program-transform=* | --program-transfor=* \
+ | --program-transfo=* | --program-transf=* \
+ | --program-trans=* | --program-tran=* \
+ | --progr-tra=* | --program-tr=* | --program-t=*)
+ program_transform_name=$ac_optarg ;;
+
+ -q | -quiet | --quiet | --quie | --qui | --qu | --q \
+ | -silent | --silent | --silen | --sile | --sil)
+ silent=yes ;;
+
+ -sbindir | --sbindir | --sbindi | --sbind | --sbin | --sbi | --sb)
+ ac_prev=sbindir ;;
+ -sbindir=* | --sbindir=* | --sbindi=* | --sbind=* | --sbin=* \
+ | --sbi=* | --sb=*)
+ sbindir=$ac_optarg ;;
+
+ -sharedstatedir | --sharedstatedir | --sharedstatedi \
+ | --sharedstated | --sharedstate | --sharedstat | --sharedsta \
+ | --sharedst | --shareds | --shared | --share | --shar \
+ | --sha | --sh)
+ ac_prev=sharedstatedir ;;
+ -sharedstatedir=* | --sharedstatedir=* | --sharedstatedi=* \
+ | --sharedstated=* | --sharedstate=* | --sharedstat=* | --sharedsta=* \
+ | --sharedst=* | --shareds=* | --shared=* | --share=* | --shar=* \
+ | --sha=* | --sh=*)
+ sharedstatedir=$ac_optarg ;;
+
+ -site | --site | --sit)
+ ac_prev=site ;;
+ -site=* | --site=* | --sit=*)
+ site=$ac_optarg ;;
+
+ -srcdir | --srcdir | --srcdi | --srcd | --src | --sr)
+ ac_prev=srcdir ;;
+ -srcdir=* | --srcdir=* | --srcdi=* | --srcd=* | --src=* | --sr=*)
+ srcdir=$ac_optarg ;;
+
+ -sysconfdir | --sysconfdir | --sysconfdi | --sysconfd | --sysconf \
+ | --syscon | --sysco | --sysc | --sys | --sy)
+ ac_prev=sysconfdir ;;
+ -sysconfdir=* | --sysconfdir=* | --sysconfdi=* | --sysconfd=* | --sysconf=* \
+ | --syscon=* | --sysco=* | --sysc=* | --sys=* | --sy=*)
+ sysconfdir=$ac_optarg ;;
+
+ -target | --target | --targe | --targ | --tar | --ta | --t)
+ ac_prev=target_alias ;;
+ -target=* | --target=* | --targe=* | --targ=* | --tar=* | --ta=* | --t=*)
+ target_alias=$ac_optarg ;;
+
+ -v | -verbose | --verbose | --verbos | --verbo | --verb)
+ verbose=yes ;;
+
+ -version | --version | --versio | --versi | --vers | -V)
+ ac_init_version=: ;;
+
+ -with-* | --with-*)
+ ac_package=`expr "x$ac_option" : 'x-*with-\([^=]*\)'`
+ # Reject names that are not valid shell variable names.
+ expr "x$ac_package" : ".*[^-_$as_cr_alnum]" >/dev/null &&
+ { echo "$as_me: error: invalid package name: $ac_package" >&2
+ { (exit 1); exit 1; }; }
+ ac_package=`echo $ac_package| sed 's/-/_/g'`
+ case $ac_option in
+ *=*) ac_optarg=`echo "$ac_optarg" | sed "s/'/'\\\\\\\\''/g"`;;
+ *) ac_optarg=yes ;;
+ esac
+ eval "with_$ac_package='$ac_optarg'" ;;
+
+ -without-* | --without-*)
+ ac_package=`expr "x$ac_option" : 'x-*without-\(.*\)'`
+ # Reject names that are not valid shell variable names.
+ expr "x$ac_package" : ".*[^-_$as_cr_alnum]" >/dev/null &&
+ { echo "$as_me: error: invalid package name: $ac_package" >&2
+ { (exit 1); exit 1; }; }
+ ac_package=`echo $ac_package | sed 's/-/_/g'`
+ eval "with_$ac_package=no" ;;
+
+ --x)
+ # Obsolete; use --with-x.
+ with_x=yes ;;
+
+ -x-includes | --x-includes | --x-include | --x-includ | --x-inclu \
+ | --x-incl | --x-inc | --x-in | --x-i)
+ ac_prev=x_includes ;;
+ -x-includes=* | --x-includes=* | --x-include=* | --x-includ=* | --x-inclu=* \
+ | --x-incl=* | --x-inc=* | --x-in=* | --x-i=*)
+ x_includes=$ac_optarg ;;
+
+ -x-libraries | --x-libraries | --x-librarie | --x-librari \
+ | --x-librar | --x-libra | --x-libr | --x-lib | --x-li | --x-l)
+ ac_prev=x_libraries ;;
+ -x-libraries=* | --x-libraries=* | --x-librarie=* | --x-librari=* \
+ | --x-librar=* | --x-libra=* | --x-libr=* | --x-lib=* | --x-li=* | --x-l=*)
+ x_libraries=$ac_optarg ;;
+
+ -*) { echo "$as_me: error: unrecognized option: $ac_option
+Try \`$0 --help' for more information." >&2
+ { (exit 1); exit 1; }; }
+ ;;
+
+ *=*)
+ ac_envvar=`expr "x$ac_option" : 'x\([^=]*\)='`
+ # Reject names that are not valid shell variable names.
+ expr "x$ac_envvar" : ".*[^_$as_cr_alnum]" >/dev/null &&
+ { echo "$as_me: error: invalid variable name: $ac_envvar" >&2
+ { (exit 1); exit 1; }; }
+ ac_optarg=`echo "$ac_optarg" | sed "s/'/'\\\\\\\\''/g"`
+ eval "$ac_envvar='$ac_optarg'"
+ export $ac_envvar ;;
+
+ *)
+ # FIXME: should be removed in autoconf 3.0.
+ echo "$as_me: WARNING: you should use --build, --host, --target" >&2
+ expr "x$ac_option" : ".*[^-._$as_cr_alnum]" >/dev/null &&
+ echo "$as_me: WARNING: invalid host type: $ac_option" >&2
+ : ${build_alias=$ac_option} ${host_alias=$ac_option} ${target_alias=$ac_option}
+ ;;
+
+ esac
+done
+
+if test -n "$ac_prev"; then
+ ac_option=--`echo $ac_prev | sed 's/_/-/g'`
+ { echo "$as_me: error: missing argument to $ac_option" >&2
+ { (exit 1); exit 1; }; }
+fi
+
+# Be sure to have absolute paths.
+for ac_var in exec_prefix prefix
+do
+ eval ac_val=$`echo $ac_var`
+ case $ac_val in
+ [\\/$]* | ?:[\\/]* | NONE | '' ) ;;
+ *) { echo "$as_me: error: expected an absolute directory name for --$ac_var: $ac_val" >&2
+ { (exit 1); exit 1; }; };;
+ esac
+done
+
+# Be sure to have absolute paths.
+for ac_var in bindir sbindir libexecdir datadir sysconfdir sharedstatedir \
+ localstatedir libdir includedir oldincludedir infodir mandir
+do
+ eval ac_val=$`echo $ac_var`
+ case $ac_val in
+ [\\/$]* | ?:[\\/]* ) ;;
+ *) { echo "$as_me: error: expected an absolute directory name for --$ac_var: $ac_val" >&2
+ { (exit 1); exit 1; }; };;
+ esac
+done
+
+# There might be people who depend on the old broken behavior: `$host'
+# used to hold the argument of --host etc.
+# FIXME: To remove some day.
+build=$build_alias
+host=$host_alias
+target=$target_alias
+
+# FIXME: To remove some day.
+if test "x$host_alias" != x; then
+ if test "x$build_alias" = x; then
+ cross_compiling=maybe
+ echo "$as_me: WARNING: If you wanted to set the --build type, don't use --host.
+ If a cross compiler is detected then cross compile mode will be used." >&2
+ elif test "x$build_alias" != "x$host_alias"; then
+ cross_compiling=yes
+ fi
+fi
+
+ac_tool_prefix=
+test -n "$host_alias" && ac_tool_prefix=$host_alias-
+
+test "$silent" = yes && exec 6>/dev/null
+
+
+# Find the source files, if location was not specified.
+if test -z "$srcdir"; then
+ ac_srcdir_defaulted=yes
+ # Try the directory containing this script, then its parent.
+ ac_confdir=`(dirname "$0") 2>/dev/null ||
+$as_expr X"$0" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
+ X"$0" : 'X\(//\)[^/]' \| \
+ X"$0" : 'X\(//\)$' \| \
+ X"$0" : 'X\(/\)' \| \
+ . : '\(.\)' 2>/dev/null ||
+echo X"$0" |
+ sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/; q; }
+ /^X\(\/\/\)[^/].*/{ s//\1/; q; }
+ /^X\(\/\/\)$/{ s//\1/; q; }
+ /^X\(\/\).*/{ s//\1/; q; }
+ s/.*/./; q'`
+ srcdir=$ac_confdir
+ if test ! -r $srcdir/$ac_unique_file; then
+ srcdir=..
+ fi
+else
+ ac_srcdir_defaulted=no
+fi
+if test ! -r $srcdir/$ac_unique_file; then
+ if test "$ac_srcdir_defaulted" = yes; then
+ { echo "$as_me: error: cannot find sources ($ac_unique_file) in $ac_confdir or .." >&2
+ { (exit 1); exit 1; }; }
+ else
+ { echo "$as_me: error: cannot find sources ($ac_unique_file) in $srcdir" >&2
+ { (exit 1); exit 1; }; }
+ fi
+fi
+(cd $srcdir && test -r ./$ac_unique_file) 2>/dev/null ||
+ { echo "$as_me: error: sources are in $srcdir, but \`cd $srcdir' does not work" >&2
+ { (exit 1); exit 1; }; }
+srcdir=`echo "$srcdir" | sed 's%\([^\\/]\)[\\/]*$%\1%'`
+ac_env_build_alias_set=${build_alias+set}
+ac_env_build_alias_value=$build_alias
+ac_cv_env_build_alias_set=${build_alias+set}
+ac_cv_env_build_alias_value=$build_alias
+ac_env_host_alias_set=${host_alias+set}
+ac_env_host_alias_value=$host_alias
+ac_cv_env_host_alias_set=${host_alias+set}
+ac_cv_env_host_alias_value=$host_alias
+ac_env_target_alias_set=${target_alias+set}
+ac_env_target_alias_value=$target_alias
+ac_cv_env_target_alias_set=${target_alias+set}
+ac_cv_env_target_alias_value=$target_alias
+ac_env_CC_set=${CC+set}
+ac_env_CC_value=$CC
+ac_cv_env_CC_set=${CC+set}
+ac_cv_env_CC_value=$CC
+ac_env_CFLAGS_set=${CFLAGS+set}
+ac_env_CFLAGS_value=$CFLAGS
+ac_cv_env_CFLAGS_set=${CFLAGS+set}
+ac_cv_env_CFLAGS_value=$CFLAGS
+ac_env_LDFLAGS_set=${LDFLAGS+set}
+ac_env_LDFLAGS_value=$LDFLAGS
+ac_cv_env_LDFLAGS_set=${LDFLAGS+set}
+ac_cv_env_LDFLAGS_value=$LDFLAGS
+ac_env_CPPFLAGS_set=${CPPFLAGS+set}
+ac_env_CPPFLAGS_value=$CPPFLAGS
+ac_cv_env_CPPFLAGS_set=${CPPFLAGS+set}
+ac_cv_env_CPPFLAGS_value=$CPPFLAGS
+ac_env_CPP_set=${CPP+set}
+ac_env_CPP_value=$CPP
+ac_cv_env_CPP_set=${CPP+set}
+ac_cv_env_CPP_value=$CPP
+
+#
+# Report the --help message.
+#
+if test "$ac_init_help" = "long"; then
+ # Omit some internal or obsolete options to make the list less imposing.
+ # This message is too long to be a string in the A/UX 3.1 sh.
+ cat <<_ACEOF
+\`configure' configures libdecnumber to adapt to many kinds of systems.
+
+Usage: $0 [OPTION]... [VAR=VALUE]...
+
+To assign environment variables (e.g., CC, CFLAGS...), specify them as
+VAR=VALUE. See below for descriptions of some of the useful variables.
+
+Defaults for the options are specified in brackets.
+
+Configuration:
+ -h, --help display this help and exit
+ --help=short display options specific to this package
+ --help=recursive display the short help of all the included packages
+ -V, --version display version information and exit
+ -q, --quiet, --silent do not print \`checking...' messages
+ --cache-file=FILE cache test results in FILE [disabled]
+ -C, --config-cache alias for \`--cache-file=config.cache'
+ -n, --no-create do not create output files
+ --srcdir=DIR find the sources in DIR [configure dir or \`..']
+
+_ACEOF
+
+ cat <<_ACEOF
+Installation directories:
+ --prefix=PREFIX install architecture-independent files in PREFIX
+ [$ac_default_prefix]
+ --exec-prefix=EPREFIX install architecture-dependent files in EPREFIX
+ [PREFIX]
+
+By default, \`make install' will install all the files in
+\`$ac_default_prefix/bin', \`$ac_default_prefix/lib' etc. You can specify
+an installation prefix other than \`$ac_default_prefix' using \`--prefix',
+for instance \`--prefix=\$HOME'.
+
+For better control, use the options below.
+
+Fine tuning of the installation directories:
+ --bindir=DIR user executables [EPREFIX/bin]
+ --sbindir=DIR system admin executables [EPREFIX/sbin]
+ --libexecdir=DIR program executables [EPREFIX/libexec]
+ --datadir=DIR read-only architecture-independent data [PREFIX/share]
+ --sysconfdir=DIR read-only single-machine data [PREFIX/etc]
+ --sharedstatedir=DIR modifiable architecture-independent data [PREFIX/com]
+ --localstatedir=DIR modifiable single-machine data [PREFIX/var]
+ --libdir=DIR object code libraries [EPREFIX/lib]
+ --includedir=DIR C header files [PREFIX/include]
+ --oldincludedir=DIR C header files for non-gcc [/usr/include]
+ --infodir=DIR info documentation [PREFIX/info]
+ --mandir=DIR man documentation [PREFIX/man]
+_ACEOF
+
+ cat <<\_ACEOF
+
+System types:
+ --build=BUILD configure for building on BUILD [guessed]
+ --host=HOST cross-compile to build programs to run on HOST [BUILD]
+ --target=TARGET configure for building compilers for TARGET [HOST]
+_ACEOF
+fi
+
+if test -n "$ac_init_help"; then
+ case $ac_init_help in
+ short | recursive ) echo "Configuration of libdecnumber :";;
+ esac
+ cat <<\_ACEOF
+
+Optional Features:
+ --disable-FEATURE do not include FEATURE (same as --enable-FEATURE=no)
+ --enable-FEATURE[=ARG] include FEATURE [ARG=yes]
+ --enable-werror-always enable -Werror despite compiler version
+ --enable-maintainer-mode enable rules only needed by maintainers
+ --enable-decimal-float={no,yes,bid,dpd}
+ enable decimal float extension to C. Selecting 'bid'
+ or 'dpd' choses which decimal floating point format
+ to use
+
+Some influential environment variables:
+ CC C compiler command
+ CFLAGS C compiler flags
+ LDFLAGS linker flags, e.g. -L<lib dir> if you have libraries in a
+ nonstandard directory <lib dir>
+ CPPFLAGS C/C++ preprocessor flags, e.g. -I<include dir> if you have
+ headers in a nonstandard directory <include dir>
+ CPP C preprocessor
+
+Use these variables to override the choices made by `configure' or to help
+it to find libraries and programs with nonstandard names/locations.
+
+Report bugs to <gcc-bugs@gcc.gnu.org>.
+_ACEOF
+fi
+
+if test "$ac_init_help" = "recursive"; then
+ # If there are subdirs, report their specific --help.
+ ac_popdir=`pwd`
+ for ac_dir in : $ac_subdirs_all; do test "x$ac_dir" = x: && continue
+ test -d $ac_dir || continue
+ ac_builddir=.
+
+if test "$ac_dir" != .; then
+ ac_dir_suffix=/`echo "$ac_dir" | sed 's,^\.[\\/],,'`
+ # A "../" for each directory in $ac_dir_suffix.
+ ac_top_builddir=`echo "$ac_dir_suffix" | sed 's,/[^\\/]*,../,g'`
+else
+ ac_dir_suffix= ac_top_builddir=
+fi
+
+case $srcdir in
+ .) # No --srcdir option. We are building in place.
+ ac_srcdir=.
+ if test -z "$ac_top_builddir"; then
+ ac_top_srcdir=.
+ else
+ ac_top_srcdir=`echo $ac_top_builddir | sed 's,/$,,'`
+ fi ;;
+ [\\/]* | ?:[\\/]* ) # Absolute path.
+ ac_srcdir=$srcdir$ac_dir_suffix;
+ ac_top_srcdir=$srcdir ;;
+ *) # Relative path.
+ ac_srcdir=$ac_top_builddir$srcdir$ac_dir_suffix
+ ac_top_srcdir=$ac_top_builddir$srcdir ;;
+esac
+
+# Do not use `cd foo && pwd` to compute absolute paths, because
+# the directories may not exist.
+case `pwd` in
+.) ac_abs_builddir="$ac_dir";;
+*)
+ case "$ac_dir" in
+ .) ac_abs_builddir=`pwd`;;
+ [\\/]* | ?:[\\/]* ) ac_abs_builddir="$ac_dir";;
+ *) ac_abs_builddir=`pwd`/"$ac_dir";;
+ esac;;
+esac
+case $ac_abs_builddir in
+.) ac_abs_top_builddir=${ac_top_builddir}.;;
+*)
+ case ${ac_top_builddir}. in
+ .) ac_abs_top_builddir=$ac_abs_builddir;;
+ [\\/]* | ?:[\\/]* ) ac_abs_top_builddir=${ac_top_builddir}.;;
+ *) ac_abs_top_builddir=$ac_abs_builddir/${ac_top_builddir}.;;
+ esac;;
+esac
+case $ac_abs_builddir in
+.) ac_abs_srcdir=$ac_srcdir;;
+*)
+ case $ac_srcdir in
+ .) ac_abs_srcdir=$ac_abs_builddir;;
+ [\\/]* | ?:[\\/]* ) ac_abs_srcdir=$ac_srcdir;;
+ *) ac_abs_srcdir=$ac_abs_builddir/$ac_srcdir;;
+ esac;;
+esac
+case $ac_abs_builddir in
+.) ac_abs_top_srcdir=$ac_top_srcdir;;
+*)
+ case $ac_top_srcdir in
+ .) ac_abs_top_srcdir=$ac_abs_builddir;;
+ [\\/]* | ?:[\\/]* ) ac_abs_top_srcdir=$ac_top_srcdir;;
+ *) ac_abs_top_srcdir=$ac_abs_builddir/$ac_top_srcdir;;
+ esac;;
+esac
+
+ cd $ac_dir
+ # Check for guested configure; otherwise get Cygnus style configure.
+ if test -f $ac_srcdir/configure.gnu; then
+ echo
+ $SHELL $ac_srcdir/configure.gnu --help=recursive
+ elif test -f $ac_srcdir/configure; then
+ echo
+ $SHELL $ac_srcdir/configure --help=recursive
+ elif test -f $ac_srcdir/configure.ac ||
+ test -f $ac_srcdir/configure.in; then
+ echo
+ $ac_configure --help
+ else
+ echo "$as_me: WARNING: no configuration information is in $ac_dir" >&2
+ fi
+ cd $ac_popdir
+ done
+fi
+
+test -n "$ac_init_help" && exit 0
+if $ac_init_version; then
+ cat <<\_ACEOF
+libdecnumber configure
+generated by GNU Autoconf 2.59
+
+Copyright (C) 2003 Free Software Foundation, Inc.
+This configure script is free software; the Free Software Foundation
+gives unlimited permission to copy, distribute and modify it.
+_ACEOF
+ exit 0
+fi
+exec 5>config.log
+cat >&5 <<_ACEOF
+This file contains any messages produced by compilers while
+running configure, to aid debugging if configure makes a mistake.
+
+It was created by libdecnumber $as_me , which was
+generated by GNU Autoconf 2.59. Invocation command line was
+
+ $ $0 $@
+
+_ACEOF
+{
+cat <<_ASUNAME
+## --------- ##
+## Platform. ##
+## --------- ##
+
+hostname = `(hostname || uname -n) 2>/dev/null | sed 1q`
+uname -m = `(uname -m) 2>/dev/null || echo unknown`
+uname -r = `(uname -r) 2>/dev/null || echo unknown`
+uname -s = `(uname -s) 2>/dev/null || echo unknown`
+uname -v = `(uname -v) 2>/dev/null || echo unknown`
+
+/usr/bin/uname -p = `(/usr/bin/uname -p) 2>/dev/null || echo unknown`
+/bin/uname -X = `(/bin/uname -X) 2>/dev/null || echo unknown`
+
+/bin/arch = `(/bin/arch) 2>/dev/null || echo unknown`
+/usr/bin/arch -k = `(/usr/bin/arch -k) 2>/dev/null || echo unknown`
+/usr/convex/getsysinfo = `(/usr/convex/getsysinfo) 2>/dev/null || echo unknown`
+hostinfo = `(hostinfo) 2>/dev/null || echo unknown`
+/bin/machine = `(/bin/machine) 2>/dev/null || echo unknown`
+/usr/bin/oslevel = `(/usr/bin/oslevel) 2>/dev/null || echo unknown`
+/bin/universe = `(/bin/universe) 2>/dev/null || echo unknown`
+
+_ASUNAME
+
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ echo "PATH: $as_dir"
+done
+
+} >&5
+
+cat >&5 <<_ACEOF
+
+
+## ----------- ##
+## Core tests. ##
+## ----------- ##
+
+_ACEOF
+
+
+# Keep a trace of the command line.
+# Strip out --no-create and --no-recursion so they do not pile up.
+# Strip out --silent because we don't want to record it for future runs.
+# Also quote any args containing shell meta-characters.
+# Make two passes to allow for proper duplicate-argument suppression.
+ac_configure_args=
+ac_configure_args0=
+ac_configure_args1=
+ac_sep=
+ac_must_keep_next=false
+for ac_pass in 1 2
+do
+ for ac_arg
+ do
+ case $ac_arg in
+ -no-create | --no-c* | -n | -no-recursion | --no-r*) continue ;;
+ -q | -quiet | --quiet | --quie | --qui | --qu | --q \
+ | -silent | --silent | --silen | --sile | --sil)
+ continue ;;
+ *" "*|*" "*|*[\[\]\~\#\$\^\&\*\(\)\{\}\\\|\;\<\>\?\"\']*)
+ ac_arg=`echo "$ac_arg" | sed "s/'/'\\\\\\\\''/g"` ;;
+ esac
+ case $ac_pass in
+ 1) ac_configure_args0="$ac_configure_args0 '$ac_arg'" ;;
+ 2)
+ ac_configure_args1="$ac_configure_args1 '$ac_arg'"
+ if test $ac_must_keep_next = true; then
+ ac_must_keep_next=false # Got value, back to normal.
+ else
+ case $ac_arg in
+ *=* | --config-cache | -C | -disable-* | --disable-* \
+ | -enable-* | --enable-* | -gas | --g* | -nfp | --nf* \
+ | -q | -quiet | --q* | -silent | --sil* | -v | -verb* \
+ | -with-* | --with-* | -without-* | --without-* | --x)
+ case "$ac_configure_args0 " in
+ "$ac_configure_args1"*" '$ac_arg' "* ) continue ;;
+ esac
+ ;;
+ -* ) ac_must_keep_next=true ;;
+ esac
+ fi
+ ac_configure_args="$ac_configure_args$ac_sep'$ac_arg'"
+ # Get rid of the leading space.
+ ac_sep=" "
+ ;;
+ esac
+ done
+done
+$as_unset ac_configure_args0 || test "${ac_configure_args0+set}" != set || { ac_configure_args0=; export ac_configure_args0; }
+$as_unset ac_configure_args1 || test "${ac_configure_args1+set}" != set || { ac_configure_args1=; export ac_configure_args1; }
+
+# When interrupted or exit'd, cleanup temporary files, and complete
+# config.log. We remove comments because anyway the quotes in there
+# would cause problems or look ugly.
+# WARNING: Be sure not to use single quotes in there, as some shells,
+# such as our DU 5.0 friend, will then `close' the trap.
+trap 'exit_status=$?
+ # Save into config.log some information that might help in debugging.
+ {
+ echo
+
+ cat <<\_ASBOX
+## ---------------- ##
+## Cache variables. ##
+## ---------------- ##
+_ASBOX
+ echo
+ # The following way of writing the cache mishandles newlines in values,
+{
+ (set) 2>&1 |
+ case `(ac_space='"'"' '"'"'; set | grep ac_space) 2>&1` in
+ *ac_space=\ *)
+ sed -n \
+ "s/'"'"'/'"'"'\\\\'"'"''"'"'/g;
+ s/^\\([_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\\)=\\(.*\\)/\\1='"'"'\\2'"'"'/p"
+ ;;
+ *)
+ sed -n \
+ "s/^\\([_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\\)=\\(.*\\)/\\1=\\2/p"
+ ;;
+ esac;
+}
+ echo
+
+ cat <<\_ASBOX
+## ----------------- ##
+## Output variables. ##
+## ----------------- ##
+_ASBOX
+ echo
+ for ac_var in $ac_subst_vars
+ do
+ eval ac_val=$`echo $ac_var`
+ echo "$ac_var='"'"'$ac_val'"'"'"
+ done | sort
+ echo
+
+ if test -n "$ac_subst_files"; then
+ cat <<\_ASBOX
+## ------------- ##
+## Output files. ##
+## ------------- ##
+_ASBOX
+ echo
+ for ac_var in $ac_subst_files
+ do
+ eval ac_val=$`echo $ac_var`
+ echo "$ac_var='"'"'$ac_val'"'"'"
+ done | sort
+ echo
+ fi
+
+ if test -s confdefs.h; then
+ cat <<\_ASBOX
+## ----------- ##
+## confdefs.h. ##
+## ----------- ##
+_ASBOX
+ echo
+ sed "/^$/d" confdefs.h | sort
+ echo
+ fi
+ test "$ac_signal" != 0 &&
+ echo "$as_me: caught signal $ac_signal"
+ echo "$as_me: exit $exit_status"
+ } >&5
+ rm -f core *.core &&
+ rm -rf conftest* confdefs* conf$$* $ac_clean_files &&
+ exit $exit_status
+ ' 0
+for ac_signal in 1 2 13 15; do
+ trap 'ac_signal='$ac_signal'; { (exit 1); exit 1; }' $ac_signal
+done
+ac_signal=0
+
+# confdefs.h avoids OS command line length limits that DEFS can exceed.
+rm -rf conftest* confdefs.h
+# AIX cpp loses on an empty file, so make sure it contains at least a newline.
+echo >confdefs.h
+
+# Predefined preprocessor variables.
+
+cat >>confdefs.h <<_ACEOF
+#define PACKAGE_NAME "$PACKAGE_NAME"
+_ACEOF
+
+
+cat >>confdefs.h <<_ACEOF
+#define PACKAGE_TARNAME "$PACKAGE_TARNAME"
+_ACEOF
+
+
+cat >>confdefs.h <<_ACEOF
+#define PACKAGE_VERSION "$PACKAGE_VERSION"
+_ACEOF
+
+
+cat >>confdefs.h <<_ACEOF
+#define PACKAGE_STRING "$PACKAGE_STRING"
+_ACEOF
+
+
+cat >>confdefs.h <<_ACEOF
+#define PACKAGE_BUGREPORT "$PACKAGE_BUGREPORT"
+_ACEOF
+
+
+# Let the site file select an alternate cache file if it wants to.
+# Prefer explicitly selected file to automatically selected ones.
+if test -z "$CONFIG_SITE"; then
+ if test "x$prefix" != xNONE; then
+ CONFIG_SITE="$prefix/share/config.site $prefix/etc/config.site"
+ else
+ CONFIG_SITE="$ac_default_prefix/share/config.site $ac_default_prefix/etc/config.site"
+ fi
+fi
+for ac_site_file in $CONFIG_SITE; do
+ if test -r "$ac_site_file"; then
+ { echo "$as_me:$LINENO: loading site script $ac_site_file" >&5
+echo "$as_me: loading site script $ac_site_file" >&6;}
+ sed 's/^/| /' "$ac_site_file" >&5
+ . "$ac_site_file"
+ fi
+done
+
+if test -r "$cache_file"; then
+ # Some versions of bash will fail to source /dev/null (special
+ # files actually), so we avoid doing that.
+ if test -f "$cache_file"; then
+ { echo "$as_me:$LINENO: loading cache $cache_file" >&5
+echo "$as_me: loading cache $cache_file" >&6;}
+ case $cache_file in
+ [\\/]* | ?:[\\/]* ) . $cache_file;;
+ *) . ./$cache_file;;
+ esac
+ fi
+else
+ { echo "$as_me:$LINENO: creating cache $cache_file" >&5
+echo "$as_me: creating cache $cache_file" >&6;}
+ >$cache_file
+fi
+
+# Check that the precious variables saved in the cache have kept the same
+# value.
+ac_cache_corrupted=false
+for ac_var in `(set) 2>&1 |
+ sed -n 's/^ac_env_\([a-zA-Z_0-9]*\)_set=.*/\1/p'`; do
+ eval ac_old_set=\$ac_cv_env_${ac_var}_set
+ eval ac_new_set=\$ac_env_${ac_var}_set
+ eval ac_old_val="\$ac_cv_env_${ac_var}_value"
+ eval ac_new_val="\$ac_env_${ac_var}_value"
+ case $ac_old_set,$ac_new_set in
+ set,)
+ { echo "$as_me:$LINENO: error: \`$ac_var' was set to \`$ac_old_val' in the previous run" >&5
+echo "$as_me: error: \`$ac_var' was set to \`$ac_old_val' in the previous run" >&2;}
+ ac_cache_corrupted=: ;;
+ ,set)
+ { echo "$as_me:$LINENO: error: \`$ac_var' was not set in the previous run" >&5
+echo "$as_me: error: \`$ac_var' was not set in the previous run" >&2;}
+ ac_cache_corrupted=: ;;
+ ,);;
+ *)
+ if test "x$ac_old_val" != "x$ac_new_val"; then
+ { echo "$as_me:$LINENO: error: \`$ac_var' has changed since the previous run:" >&5
+echo "$as_me: error: \`$ac_var' has changed since the previous run:" >&2;}
+ { echo "$as_me:$LINENO: former value: $ac_old_val" >&5
+echo "$as_me: former value: $ac_old_val" >&2;}
+ { echo "$as_me:$LINENO: current value: $ac_new_val" >&5
+echo "$as_me: current value: $ac_new_val" >&2;}
+ ac_cache_corrupted=:
+ fi;;
+ esac
+ # Pass precious variables to config.status.
+ if test "$ac_new_set" = set; then
+ case $ac_new_val in
+ *" "*|*" "*|*[\[\]\~\#\$\^\&\*\(\)\{\}\\\|\;\<\>\?\"\']*)
+ ac_arg=$ac_var=`echo "$ac_new_val" | sed "s/'/'\\\\\\\\''/g"` ;;
+ *) ac_arg=$ac_var=$ac_new_val ;;
+ esac
+ case " $ac_configure_args " in
+ *" '$ac_arg' "*) ;; # Avoid dups. Use of quotes ensures accuracy.
+ *) ac_configure_args="$ac_configure_args '$ac_arg'" ;;
+ esac
+ fi
+done
+if $ac_cache_corrupted; then
+ { echo "$as_me:$LINENO: error: changes in the environment can compromise the build" >&5
+echo "$as_me: error: changes in the environment can compromise the build" >&2;}
+ { { echo "$as_me:$LINENO: error: run \`make distclean' and/or \`rm $cache_file' and start over" >&5
+echo "$as_me: error: run \`make distclean' and/or \`rm $cache_file' and start over" >&2;}
+ { (exit 1); exit 1; }; }
+fi
+
+ac_ext=c
+ac_cpp='$CPP $CPPFLAGS'
+ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
+ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
+ac_compiler_gnu=$ac_cv_c_compiler_gnu
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+case ../config in
+ [\\/]* | ?:[\\/]* ) ac_macro_dir=../config ;;
+ *) ac_macro_dir=$srcdir/../config ;;
+esac
+if test -d "$ac_macro_dir"; then :
+else
+ { { echo "$as_me:$LINENO: error: cannot find macro directory \`../config'" >&5
+echo "$as_me: error: cannot find macro directory \`../config'" >&2;}
+ { (exit 1); exit 1; }; }
+fi
+
+
+# Checks for programs.
+echo "$as_me:$LINENO: checking whether ${MAKE-make} sets \$(MAKE)" >&5
+echo $ECHO_N "checking whether ${MAKE-make} sets \$(MAKE)... $ECHO_C" >&6
+set dummy ${MAKE-make}; ac_make=`echo "$2" | sed 'y,:./+-,___p_,'`
+if eval "test \"\${ac_cv_prog_make_${ac_make}_set+set}\" = set"; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+ cat >conftest.make <<\_ACEOF
+all:
+ @echo 'ac_maketemp="$(MAKE)"'
+_ACEOF
+# GNU make sometimes prints "make[1]: Entering...", which would confuse us.
+eval `${MAKE-make} -f conftest.make 2>/dev/null | grep temp=`
+if test -n "$ac_maketemp"; then
+ eval ac_cv_prog_make_${ac_make}_set=yes
+else
+ eval ac_cv_prog_make_${ac_make}_set=no
+fi
+rm -f conftest.make
+fi
+if eval "test \"`echo '$ac_cv_prog_make_'${ac_make}_set`\" = yes"; then
+ echo "$as_me:$LINENO: result: yes" >&5
+echo "${ECHO_T}yes" >&6
+ SET_MAKE=
+else
+ echo "$as_me:$LINENO: result: no" >&5
+echo "${ECHO_T}no" >&6
+ SET_MAKE="MAKE=${MAKE-make}"
+fi
+
+ac_ext=c
+ac_cpp='$CPP $CPPFLAGS'
+ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
+ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
+ac_compiler_gnu=$ac_cv_c_compiler_gnu
+if test -n "$ac_tool_prefix"; then
+ # Extract the first word of "${ac_tool_prefix}gcc", so it can be a program name with args.
+set dummy ${ac_tool_prefix}gcc; ac_word=$2
+echo "$as_me:$LINENO: checking for $ac_word" >&5
+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
+if test "${ac_cv_prog_CC+set}" = set; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+ if test -n "$CC"; then
+ ac_cv_prog_CC="$CC" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+ ac_cv_prog_CC="${ac_tool_prefix}gcc"
+ echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+done
+done
+
+fi
+fi
+CC=$ac_cv_prog_CC
+if test -n "$CC"; then
+ echo "$as_me:$LINENO: result: $CC" >&5
+echo "${ECHO_T}$CC" >&6
+else
+ echo "$as_me:$LINENO: result: no" >&5
+echo "${ECHO_T}no" >&6
+fi
+
+fi
+if test -z "$ac_cv_prog_CC"; then
+ ac_ct_CC=$CC
+ # Extract the first word of "gcc", so it can be a program name with args.
+set dummy gcc; ac_word=$2
+echo "$as_me:$LINENO: checking for $ac_word" >&5
+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
+if test "${ac_cv_prog_ac_ct_CC+set}" = set; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+ if test -n "$ac_ct_CC"; then
+ ac_cv_prog_ac_ct_CC="$ac_ct_CC" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+ ac_cv_prog_ac_ct_CC="gcc"
+ echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+done
+done
+
+fi
+fi
+ac_ct_CC=$ac_cv_prog_ac_ct_CC
+if test -n "$ac_ct_CC"; then
+ echo "$as_me:$LINENO: result: $ac_ct_CC" >&5
+echo "${ECHO_T}$ac_ct_CC" >&6
+else
+ echo "$as_me:$LINENO: result: no" >&5
+echo "${ECHO_T}no" >&6
+fi
+
+ CC=$ac_ct_CC
+else
+ CC="$ac_cv_prog_CC"
+fi
+
+if test -z "$CC"; then
+ if test -n "$ac_tool_prefix"; then
+ # Extract the first word of "${ac_tool_prefix}cc", so it can be a program name with args.
+set dummy ${ac_tool_prefix}cc; ac_word=$2
+echo "$as_me:$LINENO: checking for $ac_word" >&5
+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
+if test "${ac_cv_prog_CC+set}" = set; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+ if test -n "$CC"; then
+ ac_cv_prog_CC="$CC" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+ ac_cv_prog_CC="${ac_tool_prefix}cc"
+ echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+done
+done
+
+fi
+fi
+CC=$ac_cv_prog_CC
+if test -n "$CC"; then
+ echo "$as_me:$LINENO: result: $CC" >&5
+echo "${ECHO_T}$CC" >&6
+else
+ echo "$as_me:$LINENO: result: no" >&5
+echo "${ECHO_T}no" >&6
+fi
+
+fi
+if test -z "$ac_cv_prog_CC"; then
+ ac_ct_CC=$CC
+ # Extract the first word of "cc", so it can be a program name with args.
+set dummy cc; ac_word=$2
+echo "$as_me:$LINENO: checking for $ac_word" >&5
+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
+if test "${ac_cv_prog_ac_ct_CC+set}" = set; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+ if test -n "$ac_ct_CC"; then
+ ac_cv_prog_ac_ct_CC="$ac_ct_CC" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+ ac_cv_prog_ac_ct_CC="cc"
+ echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+done
+done
+
+fi
+fi
+ac_ct_CC=$ac_cv_prog_ac_ct_CC
+if test -n "$ac_ct_CC"; then
+ echo "$as_me:$LINENO: result: $ac_ct_CC" >&5
+echo "${ECHO_T}$ac_ct_CC" >&6
+else
+ echo "$as_me:$LINENO: result: no" >&5
+echo "${ECHO_T}no" >&6
+fi
+
+ CC=$ac_ct_CC
+else
+ CC="$ac_cv_prog_CC"
+fi
+
+fi
+if test -z "$CC"; then
+ # Extract the first word of "cc", so it can be a program name with args.
+set dummy cc; ac_word=$2
+echo "$as_me:$LINENO: checking for $ac_word" >&5
+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
+if test "${ac_cv_prog_CC+set}" = set; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+ if test -n "$CC"; then
+ ac_cv_prog_CC="$CC" # Let the user override the test.
+else
+ ac_prog_rejected=no
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+ if test "$as_dir/$ac_word$ac_exec_ext" = "/usr/ucb/cc"; then
+ ac_prog_rejected=yes
+ continue
+ fi
+ ac_cv_prog_CC="cc"
+ echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+done
+done
+
+if test $ac_prog_rejected = yes; then
+ # We found a bogon in the path, so make sure we never use it.
+ set dummy $ac_cv_prog_CC
+ shift
+ if test $# != 0; then
+ # We chose a different compiler from the bogus one.
+ # However, it has the same basename, so the bogon will be chosen
+ # first if we set CC to just the basename; use the full file name.
+ shift
+ ac_cv_prog_CC="$as_dir/$ac_word${1+' '}$@"
+ fi
+fi
+fi
+fi
+CC=$ac_cv_prog_CC
+if test -n "$CC"; then
+ echo "$as_me:$LINENO: result: $CC" >&5
+echo "${ECHO_T}$CC" >&6
+else
+ echo "$as_me:$LINENO: result: no" >&5
+echo "${ECHO_T}no" >&6
+fi
+
+fi
+if test -z "$CC"; then
+ if test -n "$ac_tool_prefix"; then
+ for ac_prog in cl
+ do
+ # Extract the first word of "$ac_tool_prefix$ac_prog", so it can be a program name with args.
+set dummy $ac_tool_prefix$ac_prog; ac_word=$2
+echo "$as_me:$LINENO: checking for $ac_word" >&5
+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
+if test "${ac_cv_prog_CC+set}" = set; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+ if test -n "$CC"; then
+ ac_cv_prog_CC="$CC" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+ ac_cv_prog_CC="$ac_tool_prefix$ac_prog"
+ echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+done
+done
+
+fi
+fi
+CC=$ac_cv_prog_CC
+if test -n "$CC"; then
+ echo "$as_me:$LINENO: result: $CC" >&5
+echo "${ECHO_T}$CC" >&6
+else
+ echo "$as_me:$LINENO: result: no" >&5
+echo "${ECHO_T}no" >&6
+fi
+
+ test -n "$CC" && break
+ done
+fi
+if test -z "$CC"; then
+ ac_ct_CC=$CC
+ for ac_prog in cl
+do
+ # Extract the first word of "$ac_prog", so it can be a program name with args.
+set dummy $ac_prog; ac_word=$2
+echo "$as_me:$LINENO: checking for $ac_word" >&5
+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
+if test "${ac_cv_prog_ac_ct_CC+set}" = set; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+ if test -n "$ac_ct_CC"; then
+ ac_cv_prog_ac_ct_CC="$ac_ct_CC" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+ ac_cv_prog_ac_ct_CC="$ac_prog"
+ echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+done
+done
+
+fi
+fi
+ac_ct_CC=$ac_cv_prog_ac_ct_CC
+if test -n "$ac_ct_CC"; then
+ echo "$as_me:$LINENO: result: $ac_ct_CC" >&5
+echo "${ECHO_T}$ac_ct_CC" >&6
+else
+ echo "$as_me:$LINENO: result: no" >&5
+echo "${ECHO_T}no" >&6
+fi
+
+ test -n "$ac_ct_CC" && break
+done
+
+ CC=$ac_ct_CC
+fi
+
+fi
+
+
+test -z "$CC" && { { echo "$as_me:$LINENO: error: no acceptable C compiler found in \$PATH
+See \`config.log' for more details." >&5
+echo "$as_me: error: no acceptable C compiler found in \$PATH
+See \`config.log' for more details." >&2;}
+ { (exit 1); exit 1; }; }
+
+# Provide some information about the compiler.
+echo "$as_me:$LINENO:" \
+ "checking for C compiler version" >&5
+ac_compiler=`set X $ac_compile; echo $2`
+{ (eval echo "$as_me:$LINENO: \"$ac_compiler --version </dev/null >&5\"") >&5
+ (eval $ac_compiler --version </dev/null >&5) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }
+{ (eval echo "$as_me:$LINENO: \"$ac_compiler -v </dev/null >&5\"") >&5
+ (eval $ac_compiler -v </dev/null >&5) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }
+{ (eval echo "$as_me:$LINENO: \"$ac_compiler -V </dev/null >&5\"") >&5
+ (eval $ac_compiler -V </dev/null >&5) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }
+
+cat >conftest.$ac_ext <<_ACEOF
+/* confdefs.h. */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h. */
+
+int
+main ()
+{
+
+ ;
+ return 0;
+}
+_ACEOF
+ac_clean_files_save=$ac_clean_files
+ac_clean_files="$ac_clean_files a.out a.exe b.out"
+# Try to create an executable without -o first, disregard a.out.
+# It will help us diagnose broken compilers, and finding out an intuition
+# of exeext.
+echo "$as_me:$LINENO: checking for C compiler default output file name" >&5
+echo $ECHO_N "checking for C compiler default output file name... $ECHO_C" >&6
+ac_link_default=`echo "$ac_link" | sed 's/ -o *conftest[^ ]*//'`
+if { (eval echo "$as_me:$LINENO: \"$ac_link_default\"") >&5
+ (eval $ac_link_default) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; then
+ # Find the output, starting from the most likely. This scheme is
+# not robust to junk in `.', hence go to wildcards (a.*) only as a last
+# resort.
+
+# Be careful to initialize this variable, since it used to be cached.
+# Otherwise an old cache value of `no' led to `EXEEXT = no' in a Makefile.
+ac_cv_exeext=
+# b.out is created by i960 compilers.
+for ac_file in a_out.exe a.exe conftest.exe a.out conftest a.* conftest.* b.out
+do
+ test -f "$ac_file" || continue
+ case $ac_file in
+ *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.o | *.obj )
+ ;;
+ conftest.$ac_ext )
+ # This is the source file.
+ ;;
+ [ab].out )
+ # We found the default executable, but exeext='' is most
+ # certainly right.
+ break;;
+ *.* )
+ ac_cv_exeext=`expr "$ac_file" : '[^.]*\(\..*\)'`
+ # FIXME: I believe we export ac_cv_exeext for Libtool,
+ # but it would be cool to find out if it's true. Does anybody
+ # maintain Libtool? --akim.
+ export ac_cv_exeext
+ break;;
+ * )
+ break;;
+ esac
+done
+else
+ echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+{ { echo "$as_me:$LINENO: error: C compiler cannot create executables
+See \`config.log' for more details." >&5
+echo "$as_me: error: C compiler cannot create executables
+See \`config.log' for more details." >&2;}
+ { (exit 77); exit 77; }; }
+fi
+
+ac_exeext=$ac_cv_exeext
+echo "$as_me:$LINENO: result: $ac_file" >&5
+echo "${ECHO_T}$ac_file" >&6
+
+# Check the compiler produces executables we can run. If not, either
+# the compiler is broken, or we cross compile.
+echo "$as_me:$LINENO: checking whether the C compiler works" >&5
+echo $ECHO_N "checking whether the C compiler works... $ECHO_C" >&6
+# FIXME: These cross compiler hacks should be removed for Autoconf 3.0
+# If not cross compiling, check that we can run a simple program.
+if test "$cross_compiling" != yes; then
+ if { ac_try='./$ac_file'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; }; then
+ cross_compiling=no
+ else
+ if test "$cross_compiling" = maybe; then
+ cross_compiling=yes
+ else
+ { { echo "$as_me:$LINENO: error: cannot run C compiled programs.
+If you meant to cross compile, use \`--host'.
+See \`config.log' for more details." >&5
+echo "$as_me: error: cannot run C compiled programs.
+If you meant to cross compile, use \`--host'.
+See \`config.log' for more details." >&2;}
+ { (exit 1); exit 1; }; }
+ fi
+ fi
+fi
+echo "$as_me:$LINENO: result: yes" >&5
+echo "${ECHO_T}yes" >&6
+
+rm -f a.out a.exe conftest$ac_cv_exeext b.out
+ac_clean_files=$ac_clean_files_save
+# Check the compiler produces executables we can run. If not, either
+# the compiler is broken, or we cross compile.
+echo "$as_me:$LINENO: checking whether we are cross compiling" >&5
+echo $ECHO_N "checking whether we are cross compiling... $ECHO_C" >&6
+echo "$as_me:$LINENO: result: $cross_compiling" >&5
+echo "${ECHO_T}$cross_compiling" >&6
+
+echo "$as_me:$LINENO: checking for suffix of executables" >&5
+echo $ECHO_N "checking for suffix of executables... $ECHO_C" >&6
+if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
+ (eval $ac_link) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; then
+ # If both `conftest.exe' and `conftest' are `present' (well, observable)
+# catch `conftest.exe'. For instance with Cygwin, `ls conftest' will
+# work properly (i.e., refer to `conftest.exe'), while it won't with
+# `rm'.
+for ac_file in conftest.exe conftest conftest.*; do
+ test -f "$ac_file" || continue
+ case $ac_file in
+ *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.o | *.obj ) ;;
+ *.* ) ac_cv_exeext=`expr "$ac_file" : '[^.]*\(\..*\)'`
+ export ac_cv_exeext
+ break;;
+ * ) break;;
+ esac
+done
+else
+ { { echo "$as_me:$LINENO: error: cannot compute suffix of executables: cannot compile and link
+See \`config.log' for more details." >&5
+echo "$as_me: error: cannot compute suffix of executables: cannot compile and link
+See \`config.log' for more details." >&2;}
+ { (exit 1); exit 1; }; }
+fi
+
+rm -f conftest$ac_cv_exeext
+echo "$as_me:$LINENO: result: $ac_cv_exeext" >&5
+echo "${ECHO_T}$ac_cv_exeext" >&6
+
+rm -f conftest.$ac_ext
+EXEEXT=$ac_cv_exeext
+ac_exeext=$EXEEXT
+echo "$as_me:$LINENO: checking for suffix of object files" >&5
+echo $ECHO_N "checking for suffix of object files... $ECHO_C" >&6
+if test "${ac_cv_objext+set}" = set; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+ cat >conftest.$ac_ext <<_ACEOF
+/* confdefs.h. */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h. */
+
+int
+main ()
+{
+
+ ;
+ return 0;
+}
+_ACEOF
+rm -f conftest.o conftest.obj
+if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
+ (eval $ac_compile) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; then
+ for ac_file in `(ls conftest.o conftest.obj; ls conftest.*) 2>/dev/null`; do
+ case $ac_file in
+ *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg ) ;;
+ *) ac_cv_objext=`expr "$ac_file" : '.*\.\(.*\)'`
+ break;;
+ esac
+done
+else
+ echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+{ { echo "$as_me:$LINENO: error: cannot compute suffix of object files: cannot compile
+See \`config.log' for more details." >&5
+echo "$as_me: error: cannot compute suffix of object files: cannot compile
+See \`config.log' for more details." >&2;}
+ { (exit 1); exit 1; }; }
+fi
+
+rm -f conftest.$ac_cv_objext conftest.$ac_ext
+fi
+echo "$as_me:$LINENO: result: $ac_cv_objext" >&5
+echo "${ECHO_T}$ac_cv_objext" >&6
+OBJEXT=$ac_cv_objext
+ac_objext=$OBJEXT
+echo "$as_me:$LINENO: checking whether we are using the GNU C compiler" >&5
+echo $ECHO_N "checking whether we are using the GNU C compiler... $ECHO_C" >&6
+if test "${ac_cv_c_compiler_gnu+set}" = set; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+ cat >conftest.$ac_ext <<_ACEOF
+/* confdefs.h. */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h. */
+
+int
+main ()
+{
+#ifndef __GNUC__
+ choke me
+#endif
+
+ ;
+ return 0;
+}
+_ACEOF
+rm -f conftest.$ac_objext
+if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
+ (eval $ac_compile) 2>conftest.er1
+ ac_status=$?
+ grep -v '^ *+' conftest.er1 >conftest.err
+ rm -f conftest.er1
+ cat conftest.err >&5
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); } &&
+ { ac_try='test -z "$ac_c_werror_flag"
+ || test ! -s conftest.err'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; } &&
+ { ac_try='test -s conftest.$ac_objext'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; }; then
+ ac_compiler_gnu=yes
+else
+ echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+ac_compiler_gnu=no
+fi
+rm -f conftest.err conftest.$ac_objext conftest.$ac_ext
+ac_cv_c_compiler_gnu=$ac_compiler_gnu
+
+fi
+echo "$as_me:$LINENO: result: $ac_cv_c_compiler_gnu" >&5
+echo "${ECHO_T}$ac_cv_c_compiler_gnu" >&6
+GCC=`test $ac_compiler_gnu = yes && echo yes`
+ac_test_CFLAGS=${CFLAGS+set}
+ac_save_CFLAGS=$CFLAGS
+CFLAGS="-g"
+echo "$as_me:$LINENO: checking whether $CC accepts -g" >&5
+echo $ECHO_N "checking whether $CC accepts -g... $ECHO_C" >&6
+if test "${ac_cv_prog_cc_g+set}" = set; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+ cat >conftest.$ac_ext <<_ACEOF
+/* confdefs.h. */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h. */
+
+int
+main ()
+{
+
+ ;
+ return 0;
+}
+_ACEOF
+rm -f conftest.$ac_objext
+if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
+ (eval $ac_compile) 2>conftest.er1
+ ac_status=$?
+ grep -v '^ *+' conftest.er1 >conftest.err
+ rm -f conftest.er1
+ cat conftest.err >&5
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); } &&
+ { ac_try='test -z "$ac_c_werror_flag"
+ || test ! -s conftest.err'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; } &&
+ { ac_try='test -s conftest.$ac_objext'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; }; then
+ ac_cv_prog_cc_g=yes
+else
+ echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+ac_cv_prog_cc_g=no
+fi
+rm -f conftest.err conftest.$ac_objext conftest.$ac_ext
+fi
+echo "$as_me:$LINENO: result: $ac_cv_prog_cc_g" >&5
+echo "${ECHO_T}$ac_cv_prog_cc_g" >&6
+if test "$ac_test_CFLAGS" = set; then
+ CFLAGS=$ac_save_CFLAGS
+elif test $ac_cv_prog_cc_g = yes; then
+ if test "$GCC" = yes; then
+ CFLAGS="-g -O2"
+ else
+ CFLAGS="-g"
+ fi
+else
+ if test "$GCC" = yes; then
+ CFLAGS="-O2"
+ else
+ CFLAGS=
+ fi
+fi
+echo "$as_me:$LINENO: checking for $CC option to accept ANSI C" >&5
+echo $ECHO_N "checking for $CC option to accept ANSI C... $ECHO_C" >&6
+if test "${ac_cv_prog_cc_stdc+set}" = set; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+ ac_cv_prog_cc_stdc=no
+ac_save_CC=$CC
+cat >conftest.$ac_ext <<_ACEOF
+/* confdefs.h. */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h. */
+#include <stdarg.h>
+#include <stdio.h>
+#include <sys/types.h>
+#include <sys/stat.h>
+/* Most of the following tests are stolen from RCS 5.7's src/conf.sh. */
+struct buf { int x; };
+FILE * (*rcsopen) (struct buf *, struct stat *, int);
+static char *e (p, i)
+ char **p;
+ int i;
+{
+ return p[i];
+}
+static char *f (char * (*g) (char **, int), char **p, ...)
+{
+ char *s;
+ va_list v;
+ va_start (v,p);
+ s = g (p, va_arg (v,int));
+ va_end (v);
+ return s;
+}
+
+/* OSF 4.0 Compaq cc is some sort of almost-ANSI by default. It has
+ function prototypes and stuff, but not '\xHH' hex character constants.
+ These don't provoke an error unfortunately, instead are silently treated
+ as 'x'. The following induces an error, until -std1 is added to get
+ proper ANSI mode. Curiously '\x00'!='x' always comes out true, for an
+ array size at least. It's necessary to write '\x00'==0 to get something
+ that's true only with -std1. */
+int osf4_cc_array ['\x00' == 0 ? 1 : -1];
+
+int test (int i, double x);
+struct s1 {int (*f) (int a);};
+struct s2 {int (*f) (double a);};
+int pairnames (int, char **, FILE *(*)(struct buf *, struct stat *, int), int, int);
+int argc;
+char **argv;
+int
+main ()
+{
+return f (e, argv, 0) != argv[0] || f (e, argv, 1) != argv[1];
+ ;
+ return 0;
+}
+_ACEOF
+# Don't try gcc -ansi; that turns off useful extensions and
+# breaks some systems' header files.
+# AIX -qlanglvl=ansi
+# Ultrix and OSF/1 -std1
+# HP-UX 10.20 and later -Ae
+# HP-UX older versions -Aa -D_HPUX_SOURCE
+# SVR4 -Xc -D__EXTENSIONS__
+for ac_arg in "" -qlanglvl=ansi -std1 -Ae "-Aa -D_HPUX_SOURCE" "-Xc -D__EXTENSIONS__"
+do
+ CC="$ac_save_CC $ac_arg"
+ rm -f conftest.$ac_objext
+if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
+ (eval $ac_compile) 2>conftest.er1
+ ac_status=$?
+ grep -v '^ *+' conftest.er1 >conftest.err
+ rm -f conftest.er1
+ cat conftest.err >&5
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); } &&
+ { ac_try='test -z "$ac_c_werror_flag"
+ || test ! -s conftest.err'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; } &&
+ { ac_try='test -s conftest.$ac_objext'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; }; then
+ ac_cv_prog_cc_stdc=$ac_arg
+break
+else
+ echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+fi
+rm -f conftest.err conftest.$ac_objext
+done
+rm -f conftest.$ac_ext conftest.$ac_objext
+CC=$ac_save_CC
+
+fi
+
+case "x$ac_cv_prog_cc_stdc" in
+ x|xno)
+ echo "$as_me:$LINENO: result: none needed" >&5
+echo "${ECHO_T}none needed" >&6 ;;
+ *)
+ echo "$as_me:$LINENO: result: $ac_cv_prog_cc_stdc" >&5
+echo "${ECHO_T}$ac_cv_prog_cc_stdc" >&6
+ CC="$CC $ac_cv_prog_cc_stdc" ;;
+esac
+
+# Some people use a C++ compiler to compile C. Since we use `exit',
+# in C++ we need to declare it. In case someone uses the same compiler
+# for both compiling C and C++ we need to have the C++ compiler decide
+# the declaration of exit, since it's the most demanding environment.
+cat >conftest.$ac_ext <<_ACEOF
+#ifndef __cplusplus
+ choke me
+#endif
+_ACEOF
+rm -f conftest.$ac_objext
+if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
+ (eval $ac_compile) 2>conftest.er1
+ ac_status=$?
+ grep -v '^ *+' conftest.er1 >conftest.err
+ rm -f conftest.er1
+ cat conftest.err >&5
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); } &&
+ { ac_try='test -z "$ac_c_werror_flag"
+ || test ! -s conftest.err'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; } &&
+ { ac_try='test -s conftest.$ac_objext'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; }; then
+ for ac_declaration in \
+ '' \
+ 'extern "C" void std::exit (int) throw (); using std::exit;' \
+ 'extern "C" void std::exit (int); using std::exit;' \
+ 'extern "C" void exit (int) throw ();' \
+ 'extern "C" void exit (int);' \
+ 'void exit (int);'
+do
+ cat >conftest.$ac_ext <<_ACEOF
+/* confdefs.h. */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h. */
+$ac_declaration
+#include <stdlib.h>
+int
+main ()
+{
+exit (42);
+ ;
+ return 0;
+}
+_ACEOF
+rm -f conftest.$ac_objext
+if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
+ (eval $ac_compile) 2>conftest.er1
+ ac_status=$?
+ grep -v '^ *+' conftest.er1 >conftest.err
+ rm -f conftest.er1
+ cat conftest.err >&5
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); } &&
+ { ac_try='test -z "$ac_c_werror_flag"
+ || test ! -s conftest.err'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; } &&
+ { ac_try='test -s conftest.$ac_objext'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; }; then
+ :
+else
+ echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+continue
+fi
+rm -f conftest.err conftest.$ac_objext conftest.$ac_ext
+ cat >conftest.$ac_ext <<_ACEOF
+/* confdefs.h. */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h. */
+$ac_declaration
+int
+main ()
+{
+exit (42);
+ ;
+ return 0;
+}
+_ACEOF
+rm -f conftest.$ac_objext
+if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
+ (eval $ac_compile) 2>conftest.er1
+ ac_status=$?
+ grep -v '^ *+' conftest.er1 >conftest.err
+ rm -f conftest.er1
+ cat conftest.err >&5
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); } &&
+ { ac_try='test -z "$ac_c_werror_flag"
+ || test ! -s conftest.err'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; } &&
+ { ac_try='test -s conftest.$ac_objext'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; }; then
+ break
+else
+ echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+fi
+rm -f conftest.err conftest.$ac_objext conftest.$ac_ext
+done
+rm -f conftest*
+if test -n "$ac_declaration"; then
+ echo '#ifdef __cplusplus' >>confdefs.h
+ echo $ac_declaration >>confdefs.h
+ echo '#endif' >>confdefs.h
+fi
+
+else
+ echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+fi
+rm -f conftest.err conftest.$ac_objext conftest.$ac_ext
+ac_ext=c
+ac_cpp='$CPP $CPPFLAGS'
+ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
+ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
+ac_compiler_gnu=$ac_cv_c_compiler_gnu
+
+if test -n "$ac_tool_prefix"; then
+ # Extract the first word of "${ac_tool_prefix}ranlib", so it can be a program name with args.
+set dummy ${ac_tool_prefix}ranlib; ac_word=$2
+echo "$as_me:$LINENO: checking for $ac_word" >&5
+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
+if test "${ac_cv_prog_RANLIB+set}" = set; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+ if test -n "$RANLIB"; then
+ ac_cv_prog_RANLIB="$RANLIB" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+ ac_cv_prog_RANLIB="${ac_tool_prefix}ranlib"
+ echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+done
+done
+
+fi
+fi
+RANLIB=$ac_cv_prog_RANLIB
+if test -n "$RANLIB"; then
+ echo "$as_me:$LINENO: result: $RANLIB" >&5
+echo "${ECHO_T}$RANLIB" >&6
+else
+ echo "$as_me:$LINENO: result: no" >&5
+echo "${ECHO_T}no" >&6
+fi
+
+fi
+if test -z "$ac_cv_prog_RANLIB"; then
+ ac_ct_RANLIB=$RANLIB
+ # Extract the first word of "ranlib", so it can be a program name with args.
+set dummy ranlib; ac_word=$2
+echo "$as_me:$LINENO: checking for $ac_word" >&5
+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
+if test "${ac_cv_prog_ac_ct_RANLIB+set}" = set; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+ if test -n "$ac_ct_RANLIB"; then
+ ac_cv_prog_ac_ct_RANLIB="$ac_ct_RANLIB" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+ ac_cv_prog_ac_ct_RANLIB="ranlib"
+ echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+done
+done
+
+ test -z "$ac_cv_prog_ac_ct_RANLIB" && ac_cv_prog_ac_ct_RANLIB=":"
+fi
+fi
+ac_ct_RANLIB=$ac_cv_prog_ac_ct_RANLIB
+if test -n "$ac_ct_RANLIB"; then
+ echo "$as_me:$LINENO: result: $ac_ct_RANLIB" >&5
+echo "${ECHO_T}$ac_ct_RANLIB" >&6
+else
+ echo "$as_me:$LINENO: result: no" >&5
+echo "${ECHO_T}no" >&6
+fi
+
+ RANLIB=$ac_ct_RANLIB
+else
+ RANLIB="$ac_cv_prog_RANLIB"
+fi
+
+
+MISSING=`cd $ac_aux_dir && ${PWDCMD-pwd}`/missing
+for ac_prog in aclocal
+do
+ # Extract the first word of "$ac_prog", so it can be a program name with args.
+set dummy $ac_prog; ac_word=$2
+echo "$as_me:$LINENO: checking for $ac_word" >&5
+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
+if test "${ac_cv_prog_ACLOCAL+set}" = set; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+ if test -n "$ACLOCAL"; then
+ ac_cv_prog_ACLOCAL="$ACLOCAL" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+ ac_cv_prog_ACLOCAL="$ac_prog"
+ echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+done
+done
+
+fi
+fi
+ACLOCAL=$ac_cv_prog_ACLOCAL
+if test -n "$ACLOCAL"; then
+ echo "$as_me:$LINENO: result: $ACLOCAL" >&5
+echo "${ECHO_T}$ACLOCAL" >&6
+else
+ echo "$as_me:$LINENO: result: no" >&5
+echo "${ECHO_T}no" >&6
+fi
+
+ test -n "$ACLOCAL" && break
+done
+test -n "$ACLOCAL" || ACLOCAL="$MISSING aclocal"
+
+for ac_prog in autoconf
+do
+ # Extract the first word of "$ac_prog", so it can be a program name with args.
+set dummy $ac_prog; ac_word=$2
+echo "$as_me:$LINENO: checking for $ac_word" >&5
+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
+if test "${ac_cv_prog_AUTOCONF+set}" = set; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+ if test -n "$AUTOCONF"; then
+ ac_cv_prog_AUTOCONF="$AUTOCONF" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+ ac_cv_prog_AUTOCONF="$ac_prog"
+ echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+done
+done
+
+fi
+fi
+AUTOCONF=$ac_cv_prog_AUTOCONF
+if test -n "$AUTOCONF"; then
+ echo "$as_me:$LINENO: result: $AUTOCONF" >&5
+echo "${ECHO_T}$AUTOCONF" >&6
+else
+ echo "$as_me:$LINENO: result: no" >&5
+echo "${ECHO_T}no" >&6
+fi
+
+ test -n "$AUTOCONF" && break
+done
+test -n "$AUTOCONF" || AUTOCONF="$MISSING autoconf"
+
+for ac_prog in autoheader
+do
+ # Extract the first word of "$ac_prog", so it can be a program name with args.
+set dummy $ac_prog; ac_word=$2
+echo "$as_me:$LINENO: checking for $ac_word" >&5
+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
+if test "${ac_cv_prog_AUTOHEADER+set}" = set; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+ if test -n "$AUTOHEADER"; then
+ ac_cv_prog_AUTOHEADER="$AUTOHEADER" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+ ac_cv_prog_AUTOHEADER="$ac_prog"
+ echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+done
+done
+
+fi
+fi
+AUTOHEADER=$ac_cv_prog_AUTOHEADER
+if test -n "$AUTOHEADER"; then
+ echo "$as_me:$LINENO: result: $AUTOHEADER" >&5
+echo "${ECHO_T}$AUTOHEADER" >&6
+else
+ echo "$as_me:$LINENO: result: no" >&5
+echo "${ECHO_T}no" >&6
+fi
+
+ test -n "$AUTOHEADER" && break
+done
+test -n "$AUTOHEADER" || AUTOHEADER="$MISSING autoheader"
+
+
+# Figure out what compiler warnings we can enable.
+# See config/warnings.m4 for details.
+
+
+WARN_CFLAGS=
+save_CFLAGS="$CFLAGS"
+for option in -W -Wall -Wwrite-strings -Wstrict-prototypes \
+ -Wmissing-prototypes -Wold-style-definition \
+ -Wmissing-format-attribute -Wcast-qual; do
+ as_acx_Woption=`echo "acx_cv_prog_cc_warning_$option" | $as_tr_sh`
+
+ echo "$as_me:$LINENO: checking whether $CC supports $option" >&5
+echo $ECHO_N "checking whether $CC supports $option... $ECHO_C" >&6
+if eval "test \"\${$as_acx_Woption+set}\" = set"; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+ CFLAGS="$option"
+ cat >conftest.$ac_ext <<_ACEOF
+/* confdefs.h. */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h. */
+
+int
+main ()
+{
+
+ ;
+ return 0;
+}
+_ACEOF
+rm -f conftest.$ac_objext
+if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
+ (eval $ac_compile) 2>conftest.er1
+ ac_status=$?
+ grep -v '^ *+' conftest.er1 >conftest.err
+ rm -f conftest.er1
+ cat conftest.err >&5
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); } &&
+ { ac_try='test -z "$ac_c_werror_flag"
+ || test ! -s conftest.err'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; } &&
+ { ac_try='test -s conftest.$ac_objext'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; }; then
+ eval "$as_acx_Woption=yes"
+else
+ echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+eval "$as_acx_Woption=no"
+fi
+rm -f conftest.err conftest.$ac_objext conftest.$ac_ext
+
+fi
+echo "$as_me:$LINENO: result: `eval echo '${'$as_acx_Woption'}'`" >&5
+echo "${ECHO_T}`eval echo '${'$as_acx_Woption'}'`" >&6
+ if test `eval echo '${'$as_acx_Woption'}'` = yes; then
+ WARN_CFLAGS="$WARN_CFLAGS${WARN_CFLAGS:+ }$option"
+fi
+
+ done
+CFLAGS="$save_CFLAGS"
+
+WARN_PEDANTIC=
+if test "$GCC" = yes; then
+ echo "$as_me:$LINENO: checking whether $CC supports -pedantic -Wno-long-long" >&5
+echo $ECHO_N "checking whether $CC supports -pedantic -Wno-long-long... $ECHO_C" >&6
+if test "${acx_cv_prog_cc_pedantic__Wno_long_long+set}" = set; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+ save_CFLAGS="$CFLAGS"
+CFLAGS="-pedantic -Wno-long-long"
+cat >conftest.$ac_ext <<_ACEOF
+/* confdefs.h. */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h. */
+
+int
+main ()
+{
+
+ ;
+ return 0;
+}
+_ACEOF
+rm -f conftest.$ac_objext
+if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
+ (eval $ac_compile) 2>conftest.er1
+ ac_status=$?
+ grep -v '^ *+' conftest.er1 >conftest.err
+ rm -f conftest.er1
+ cat conftest.err >&5
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); } &&
+ { ac_try='test -z "$ac_c_werror_flag"
+ || test ! -s conftest.err'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; } &&
+ { ac_try='test -s conftest.$ac_objext'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; }; then
+ acx_cv_prog_cc_pedantic__Wno_long_long=yes
+else
+ echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+acx_cv_prog_cc_pedantic__Wno_long_long=no
+fi
+rm -f conftest.err conftest.$ac_objext conftest.$ac_ext
+CFLAGS="$save_CFLAGS"
+fi
+echo "$as_me:$LINENO: result: $acx_cv_prog_cc_pedantic__Wno_long_long" >&5
+echo "${ECHO_T}$acx_cv_prog_cc_pedantic__Wno_long_long" >&6
+if test $acx_cv_prog_cc_pedantic__Wno_long_long = yes; then
+ WARN_PEDANTIC="$WARN_PEDANTIC${WARN_PEDANTIC:+ }-pedantic -Wno-long-long"
+fi
+
+
+fi
+
+
+
+# Only enable with --enable-werror-always until existing warnings are
+# corrected.
+WERROR=
+# Check whether --enable-werror-always or --disable-werror-always was given.
+if test "${enable_werror_always+set}" = set; then
+ enableval="$enable_werror_always"
+
+else
+ enable_werror_always=no
+fi;
+if test $enable_werror_always = yes; then
+ WERROR="$WERROR${WERROR:+ }-Werror"
+fi
+
+
+
+
+# Checks for header files.
+ac_ext=c
+ac_cpp='$CPP $CPPFLAGS'
+ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
+ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
+ac_compiler_gnu=$ac_cv_c_compiler_gnu
+echo "$as_me:$LINENO: checking how to run the C preprocessor" >&5
+echo $ECHO_N "checking how to run the C preprocessor... $ECHO_C" >&6
+# On Suns, sometimes $CPP names a directory.
+if test -n "$CPP" && test -d "$CPP"; then
+ CPP=
+fi
+if test -z "$CPP"; then
+ if test "${ac_cv_prog_CPP+set}" = set; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+ # Double quotes because CPP needs to be expanded
+ for CPP in "$CC -E" "$CC -E -traditional-cpp" "/lib/cpp"
+ do
+ ac_preproc_ok=false
+for ac_c_preproc_warn_flag in '' yes
+do
+ # Use a header file that comes with gcc, so configuring glibc
+ # with a fresh cross-compiler works.
+ # Prefer <limits.h> to <assert.h> if __STDC__ is defined, since
+ # <limits.h> exists even on freestanding compilers.
+ # On the NeXT, cc -E runs the code through the compiler's parser,
+ # not just through cpp. "Syntax error" is here to catch this case.
+ cat >conftest.$ac_ext <<_ACEOF
+/* confdefs.h. */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h. */
+#ifdef __STDC__
+# include <limits.h>
+#else
+# include <assert.h>
+#endif
+ Syntax error
+_ACEOF
+if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5
+ (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1
+ ac_status=$?
+ grep -v '^ *+' conftest.er1 >conftest.err
+ rm -f conftest.er1
+ cat conftest.err >&5
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); } >/dev/null; then
+ if test -s conftest.err; then
+ ac_cpp_err=$ac_c_preproc_warn_flag
+ ac_cpp_err=$ac_cpp_err$ac_c_werror_flag
+ else
+ ac_cpp_err=
+ fi
+else
+ ac_cpp_err=yes
+fi
+if test -z "$ac_cpp_err"; then
+ :
+else
+ echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+ # Broken: fails on valid input.
+continue
+fi
+rm -f conftest.err conftest.$ac_ext
+
+ # OK, works on sane cases. Now check whether non-existent headers
+ # can be detected and how.
+ cat >conftest.$ac_ext <<_ACEOF
+/* confdefs.h. */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h. */
+#include <ac_nonexistent.h>
+_ACEOF
+if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5
+ (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1
+ ac_status=$?
+ grep -v '^ *+' conftest.er1 >conftest.err
+ rm -f conftest.er1
+ cat conftest.err >&5
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); } >/dev/null; then
+ if test -s conftest.err; then
+ ac_cpp_err=$ac_c_preproc_warn_flag
+ ac_cpp_err=$ac_cpp_err$ac_c_werror_flag
+ else
+ ac_cpp_err=
+ fi
+else
+ ac_cpp_err=yes
+fi
+if test -z "$ac_cpp_err"; then
+ # Broken: success on invalid input.
+continue
+else
+ echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+ # Passes both tests.
+ac_preproc_ok=:
+break
+fi
+rm -f conftest.err conftest.$ac_ext
+
+done
+# Because of `break', _AC_PREPROC_IFELSE's cleaning code was skipped.
+rm -f conftest.err conftest.$ac_ext
+if $ac_preproc_ok; then
+ break
+fi
+
+ done
+ ac_cv_prog_CPP=$CPP
+
+fi
+ CPP=$ac_cv_prog_CPP
+else
+ ac_cv_prog_CPP=$CPP
+fi
+echo "$as_me:$LINENO: result: $CPP" >&5
+echo "${ECHO_T}$CPP" >&6
+ac_preproc_ok=false
+for ac_c_preproc_warn_flag in '' yes
+do
+ # Use a header file that comes with gcc, so configuring glibc
+ # with a fresh cross-compiler works.
+ # Prefer <limits.h> to <assert.h> if __STDC__ is defined, since
+ # <limits.h> exists even on freestanding compilers.
+ # On the NeXT, cc -E runs the code through the compiler's parser,
+ # not just through cpp. "Syntax error" is here to catch this case.
+ cat >conftest.$ac_ext <<_ACEOF
+/* confdefs.h. */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h. */
+#ifdef __STDC__
+# include <limits.h>
+#else
+# include <assert.h>
+#endif
+ Syntax error
+_ACEOF
+if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5
+ (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1
+ ac_status=$?
+ grep -v '^ *+' conftest.er1 >conftest.err
+ rm -f conftest.er1
+ cat conftest.err >&5
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); } >/dev/null; then
+ if test -s conftest.err; then
+ ac_cpp_err=$ac_c_preproc_warn_flag
+ ac_cpp_err=$ac_cpp_err$ac_c_werror_flag
+ else
+ ac_cpp_err=
+ fi
+else
+ ac_cpp_err=yes
+fi
+if test -z "$ac_cpp_err"; then
+ :
+else
+ echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+ # Broken: fails on valid input.
+continue
+fi
+rm -f conftest.err conftest.$ac_ext
+
+ # OK, works on sane cases. Now check whether non-existent headers
+ # can be detected and how.
+ cat >conftest.$ac_ext <<_ACEOF
+/* confdefs.h. */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h. */
+#include <ac_nonexistent.h>
+_ACEOF
+if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5
+ (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1
+ ac_status=$?
+ grep -v '^ *+' conftest.er1 >conftest.err
+ rm -f conftest.er1
+ cat conftest.err >&5
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); } >/dev/null; then
+ if test -s conftest.err; then
+ ac_cpp_err=$ac_c_preproc_warn_flag
+ ac_cpp_err=$ac_cpp_err$ac_c_werror_flag
+ else
+ ac_cpp_err=
+ fi
+else
+ ac_cpp_err=yes
+fi
+if test -z "$ac_cpp_err"; then
+ # Broken: success on invalid input.
+continue
+else
+ echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+ # Passes both tests.
+ac_preproc_ok=:
+break
+fi
+rm -f conftest.err conftest.$ac_ext
+
+done
+# Because of `break', _AC_PREPROC_IFELSE's cleaning code was skipped.
+rm -f conftest.err conftest.$ac_ext
+if $ac_preproc_ok; then
+ :
+else
+ { { echo "$as_me:$LINENO: error: C preprocessor \"$CPP\" fails sanity check
+See \`config.log' for more details." >&5
+echo "$as_me: error: C preprocessor \"$CPP\" fails sanity check
+See \`config.log' for more details." >&2;}
+ { (exit 1); exit 1; }; }
+fi
+
+ac_ext=c
+ac_cpp='$CPP $CPPFLAGS'
+ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
+ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
+ac_compiler_gnu=$ac_cv_c_compiler_gnu
+
+
+echo "$as_me:$LINENO: checking for egrep" >&5
+echo $ECHO_N "checking for egrep... $ECHO_C" >&6
+if test "${ac_cv_prog_egrep+set}" = set; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+ if echo a | (grep -E '(a|b)') >/dev/null 2>&1
+ then ac_cv_prog_egrep='grep -E'
+ else ac_cv_prog_egrep='egrep'
+ fi
+fi
+echo "$as_me:$LINENO: result: $ac_cv_prog_egrep" >&5
+echo "${ECHO_T}$ac_cv_prog_egrep" >&6
+ EGREP=$ac_cv_prog_egrep
+
+
+echo "$as_me:$LINENO: checking for ANSI C header files" >&5
+echo $ECHO_N "checking for ANSI C header files... $ECHO_C" >&6
+if test "${ac_cv_header_stdc+set}" = set; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+ cat >conftest.$ac_ext <<_ACEOF
+/* confdefs.h. */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h. */
+#include <stdlib.h>
+#include <stdarg.h>
+#include <string.h>
+#include <float.h>
+
+int
+main ()
+{
+
+ ;
+ return 0;
+}
+_ACEOF
+rm -f conftest.$ac_objext
+if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
+ (eval $ac_compile) 2>conftest.er1
+ ac_status=$?
+ grep -v '^ *+' conftest.er1 >conftest.err
+ rm -f conftest.er1
+ cat conftest.err >&5
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); } &&
+ { ac_try='test -z "$ac_c_werror_flag"
+ || test ! -s conftest.err'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; } &&
+ { ac_try='test -s conftest.$ac_objext'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; }; then
+ ac_cv_header_stdc=yes
+else
+ echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+ac_cv_header_stdc=no
+fi
+rm -f conftest.err conftest.$ac_objext conftest.$ac_ext
+
+if test $ac_cv_header_stdc = yes; then
+ # SunOS 4.x string.h does not declare mem*, contrary to ANSI.
+ cat >conftest.$ac_ext <<_ACEOF
+/* confdefs.h. */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h. */
+#include <string.h>
+
+_ACEOF
+if (eval "$ac_cpp conftest.$ac_ext") 2>&5 |
+ $EGREP "memchr" >/dev/null 2>&1; then
+ :
+else
+ ac_cv_header_stdc=no
+fi
+rm -f conftest*
+
+fi
+
+if test $ac_cv_header_stdc = yes; then
+ # ISC 2.0.2 stdlib.h does not declare free, contrary to ANSI.
+ cat >conftest.$ac_ext <<_ACEOF
+/* confdefs.h. */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h. */
+#include <stdlib.h>
+
+_ACEOF
+if (eval "$ac_cpp conftest.$ac_ext") 2>&5 |
+ $EGREP "free" >/dev/null 2>&1; then
+ :
+else
+ ac_cv_header_stdc=no
+fi
+rm -f conftest*
+
+fi
+
+if test $ac_cv_header_stdc = yes; then
+ # /bin/cc in Irix-4.0.5 gets non-ANSI ctype macros unless using -ansi.
+ if test "$cross_compiling" = yes; then
+ :
+else
+ cat >conftest.$ac_ext <<_ACEOF
+/* confdefs.h. */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h. */
+#include <ctype.h>
+#if ((' ' & 0x0FF) == 0x020)
+# define ISLOWER(c) ('a' <= (c) && (c) <= 'z')
+# define TOUPPER(c) (ISLOWER(c) ? 'A' + ((c) - 'a') : (c))
+#else
+# define ISLOWER(c) \
+ (('a' <= (c) && (c) <= 'i') \
+ || ('j' <= (c) && (c) <= 'r') \
+ || ('s' <= (c) && (c) <= 'z'))
+# define TOUPPER(c) (ISLOWER(c) ? ((c) | 0x40) : (c))
+#endif
+
+#define XOR(e, f) (((e) && !(f)) || (!(e) && (f)))
+int
+main ()
+{
+ int i;
+ for (i = 0; i < 256; i++)
+ if (XOR (islower (i), ISLOWER (i))
+ || toupper (i) != TOUPPER (i))
+ exit(2);
+ exit (0);
+}
+_ACEOF
+rm -f conftest$ac_exeext
+if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
+ (eval $ac_link) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); } && { ac_try='./conftest$ac_exeext'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; }; then
+ :
+else
+ echo "$as_me: program exited with status $ac_status" >&5
+echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+( exit $ac_status )
+ac_cv_header_stdc=no
+fi
+rm -f core *.core gmon.out bb.out conftest$ac_exeext conftest.$ac_objext conftest.$ac_ext
+fi
+fi
+fi
+echo "$as_me:$LINENO: result: $ac_cv_header_stdc" >&5
+echo "${ECHO_T}$ac_cv_header_stdc" >&6
+if test $ac_cv_header_stdc = yes; then
+
+cat >>confdefs.h <<\_ACEOF
+#define STDC_HEADERS 1
+_ACEOF
+
+fi
+
+# On IRIX 5.3, sys/types and inttypes.h are conflicting.
+
+
+
+
+
+
+
+
+
+for ac_header in sys/types.h sys/stat.h stdlib.h string.h memory.h strings.h \
+ inttypes.h stdint.h unistd.h
+do
+as_ac_Header=`echo "ac_cv_header_$ac_header" | $as_tr_sh`
+echo "$as_me:$LINENO: checking for $ac_header" >&5
+echo $ECHO_N "checking for $ac_header... $ECHO_C" >&6
+if eval "test \"\${$as_ac_Header+set}\" = set"; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+ cat >conftest.$ac_ext <<_ACEOF
+/* confdefs.h. */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h. */
+$ac_includes_default
+
+#include <$ac_header>
+_ACEOF
+rm -f conftest.$ac_objext
+if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
+ (eval $ac_compile) 2>conftest.er1
+ ac_status=$?
+ grep -v '^ *+' conftest.er1 >conftest.err
+ rm -f conftest.er1
+ cat conftest.err >&5
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); } &&
+ { ac_try='test -z "$ac_c_werror_flag"
+ || test ! -s conftest.err'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; } &&
+ { ac_try='test -s conftest.$ac_objext'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; }; then
+ eval "$as_ac_Header=yes"
+else
+ echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+eval "$as_ac_Header=no"
+fi
+rm -f conftest.err conftest.$ac_objext conftest.$ac_ext
+fi
+echo "$as_me:$LINENO: result: `eval echo '${'$as_ac_Header'}'`" >&5
+echo "${ECHO_T}`eval echo '${'$as_ac_Header'}'`" >&6
+if test `eval echo '${'$as_ac_Header'}'` = yes; then
+ cat >>confdefs.h <<_ACEOF
+#define `echo "HAVE_$ac_header" | $as_tr_cpp` 1
+_ACEOF
+
+fi
+
+done
+
+
+
+
+
+
+for ac_header in ctype.h stddef.h string.h stdio.h
+do
+as_ac_Header=`echo "ac_cv_header_$ac_header" | $as_tr_sh`
+if eval "test \"\${$as_ac_Header+set}\" = set"; then
+ echo "$as_me:$LINENO: checking for $ac_header" >&5
+echo $ECHO_N "checking for $ac_header... $ECHO_C" >&6
+if eval "test \"\${$as_ac_Header+set}\" = set"; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+fi
+echo "$as_me:$LINENO: result: `eval echo '${'$as_ac_Header'}'`" >&5
+echo "${ECHO_T}`eval echo '${'$as_ac_Header'}'`" >&6
+else
+ # Is the header compilable?
+echo "$as_me:$LINENO: checking $ac_header usability" >&5
+echo $ECHO_N "checking $ac_header usability... $ECHO_C" >&6
+cat >conftest.$ac_ext <<_ACEOF
+/* confdefs.h. */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h. */
+$ac_includes_default
+#include <$ac_header>
+_ACEOF
+rm -f conftest.$ac_objext
+if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
+ (eval $ac_compile) 2>conftest.er1
+ ac_status=$?
+ grep -v '^ *+' conftest.er1 >conftest.err
+ rm -f conftest.er1
+ cat conftest.err >&5
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); } &&
+ { ac_try='test -z "$ac_c_werror_flag"
+ || test ! -s conftest.err'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; } &&
+ { ac_try='test -s conftest.$ac_objext'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; }; then
+ ac_header_compiler=yes
+else
+ echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+ac_header_compiler=no
+fi
+rm -f conftest.err conftest.$ac_objext conftest.$ac_ext
+echo "$as_me:$LINENO: result: $ac_header_compiler" >&5
+echo "${ECHO_T}$ac_header_compiler" >&6
+
+# Is the header present?
+echo "$as_me:$LINENO: checking $ac_header presence" >&5
+echo $ECHO_N "checking $ac_header presence... $ECHO_C" >&6
+cat >conftest.$ac_ext <<_ACEOF
+/* confdefs.h. */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h. */
+#include <$ac_header>
+_ACEOF
+if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5
+ (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1
+ ac_status=$?
+ grep -v '^ *+' conftest.er1 >conftest.err
+ rm -f conftest.er1
+ cat conftest.err >&5
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); } >/dev/null; then
+ if test -s conftest.err; then
+ ac_cpp_err=$ac_c_preproc_warn_flag
+ ac_cpp_err=$ac_cpp_err$ac_c_werror_flag
+ else
+ ac_cpp_err=
+ fi
+else
+ ac_cpp_err=yes
+fi
+if test -z "$ac_cpp_err"; then
+ ac_header_preproc=yes
+else
+ echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+ ac_header_preproc=no
+fi
+rm -f conftest.err conftest.$ac_ext
+echo "$as_me:$LINENO: result: $ac_header_preproc" >&5
+echo "${ECHO_T}$ac_header_preproc" >&6
+
+# So? What about this header?
+case $ac_header_compiler:$ac_header_preproc:$ac_c_preproc_warn_flag in
+ yes:no: )
+ { echo "$as_me:$LINENO: WARNING: $ac_header: accepted by the compiler, rejected by the preprocessor!" >&5
+echo "$as_me: WARNING: $ac_header: accepted by the compiler, rejected by the preprocessor!" >&2;}
+ { echo "$as_me:$LINENO: WARNING: $ac_header: proceeding with the compiler's result" >&5
+echo "$as_me: WARNING: $ac_header: proceeding with the compiler's result" >&2;}
+ ac_header_preproc=yes
+ ;;
+ no:yes:* )
+ { echo "$as_me:$LINENO: WARNING: $ac_header: present but cannot be compiled" >&5
+echo "$as_me: WARNING: $ac_header: present but cannot be compiled" >&2;}
+ { echo "$as_me:$LINENO: WARNING: $ac_header: check for missing prerequisite headers?" >&5
+echo "$as_me: WARNING: $ac_header: check for missing prerequisite headers?" >&2;}
+ { echo "$as_me:$LINENO: WARNING: $ac_header: see the Autoconf documentation" >&5
+echo "$as_me: WARNING: $ac_header: see the Autoconf documentation" >&2;}
+ { echo "$as_me:$LINENO: WARNING: $ac_header: section \"Present But Cannot Be Compiled\"" >&5
+echo "$as_me: WARNING: $ac_header: section \"Present But Cannot Be Compiled\"" >&2;}
+ { echo "$as_me:$LINENO: WARNING: $ac_header: proceeding with the preprocessor's result" >&5
+echo "$as_me: WARNING: $ac_header: proceeding with the preprocessor's result" >&2;}
+ { echo "$as_me:$LINENO: WARNING: $ac_header: in the future, the compiler will take precedence" >&5
+echo "$as_me: WARNING: $ac_header: in the future, the compiler will take precedence" >&2;}
+ (
+ cat <<\_ASBOX
+## ----------------------------------- ##
+## Report this to gcc-bugs@gcc.gnu.org ##
+## ----------------------------------- ##
+_ASBOX
+ ) |
+ sed "s/^/$as_me: WARNING: /" >&2
+ ;;
+esac
+echo "$as_me:$LINENO: checking for $ac_header" >&5
+echo $ECHO_N "checking for $ac_header... $ECHO_C" >&6
+if eval "test \"\${$as_ac_Header+set}\" = set"; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+ eval "$as_ac_Header=\$ac_header_preproc"
+fi
+echo "$as_me:$LINENO: result: `eval echo '${'$as_ac_Header'}'`" >&5
+echo "${ECHO_T}`eval echo '${'$as_ac_Header'}'`" >&6
+
+fi
+if test `eval echo '${'$as_ac_Header'}'` = yes; then
+ cat >>confdefs.h <<_ACEOF
+#define `echo "HAVE_$ac_header" | $as_tr_cpp` 1
+_ACEOF
+
+fi
+
+done
+
+
+
+inttype_headers=`echo inttypes.h sys/inttypes.h | sed -e 's/,/ /g'`
+
+acx_cv_header_stdint=stddef.h
+acx_cv_header_stdint_kind="(already complete)"
+for i in stdint.h $inttype_headers; do
+ unset ac_cv_type_uintptr_t
+ unset ac_cv_type_uintmax_t
+ unset ac_cv_type_int_least32_t
+ unset ac_cv_type_int_fast32_t
+ unset ac_cv_type_uint64_t
+ echo $ECHO_N "looking for a compliant stdint.h in $i, $ECHO_C" >&6
+ echo "$as_me:$LINENO: checking for uintmax_t" >&5
+echo $ECHO_N "checking for uintmax_t... $ECHO_C" >&6
+if test "${ac_cv_type_uintmax_t+set}" = set; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+ cat >conftest.$ac_ext <<_ACEOF
+/* confdefs.h. */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h. */
+#include <sys/types.h>
+#include <$i>
+
+int
+main ()
+{
+if ((uintmax_t *) 0)
+ return 0;
+if (sizeof (uintmax_t))
+ return 0;
+ ;
+ return 0;
+}
+_ACEOF
+rm -f conftest.$ac_objext
+if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
+ (eval $ac_compile) 2>conftest.er1
+ ac_status=$?
+ grep -v '^ *+' conftest.er1 >conftest.err
+ rm -f conftest.er1
+ cat conftest.err >&5
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); } &&
+ { ac_try='test -z "$ac_c_werror_flag"
+ || test ! -s conftest.err'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; } &&
+ { ac_try='test -s conftest.$ac_objext'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; }; then
+ ac_cv_type_uintmax_t=yes
+else
+ echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+ac_cv_type_uintmax_t=no
+fi
+rm -f conftest.err conftest.$ac_objext conftest.$ac_ext
+fi
+echo "$as_me:$LINENO: result: $ac_cv_type_uintmax_t" >&5
+echo "${ECHO_T}$ac_cv_type_uintmax_t" >&6
+if test $ac_cv_type_uintmax_t = yes; then
+ acx_cv_header_stdint=$i
+else
+ continue
+fi
+
+ echo "$as_me:$LINENO: checking for uintptr_t" >&5
+echo $ECHO_N "checking for uintptr_t... $ECHO_C" >&6
+if test "${ac_cv_type_uintptr_t+set}" = set; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+ cat >conftest.$ac_ext <<_ACEOF
+/* confdefs.h. */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h. */
+#include <sys/types.h>
+#include <$i>
+
+int
+main ()
+{
+if ((uintptr_t *) 0)
+ return 0;
+if (sizeof (uintptr_t))
+ return 0;
+ ;
+ return 0;
+}
+_ACEOF
+rm -f conftest.$ac_objext
+if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
+ (eval $ac_compile) 2>conftest.er1
+ ac_status=$?
+ grep -v '^ *+' conftest.er1 >conftest.err
+ rm -f conftest.er1
+ cat conftest.err >&5
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); } &&
+ { ac_try='test -z "$ac_c_werror_flag"
+ || test ! -s conftest.err'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; } &&
+ { ac_try='test -s conftest.$ac_objext'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; }; then
+ ac_cv_type_uintptr_t=yes
+else
+ echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+ac_cv_type_uintptr_t=no
+fi
+rm -f conftest.err conftest.$ac_objext conftest.$ac_ext
+fi
+echo "$as_me:$LINENO: result: $ac_cv_type_uintptr_t" >&5
+echo "${ECHO_T}$ac_cv_type_uintptr_t" >&6
+if test $ac_cv_type_uintptr_t = yes; then
+ :
+else
+ acx_cv_header_stdint_kind="(mostly complete)"
+fi
+
+ echo "$as_me:$LINENO: checking for int_least32_t" >&5
+echo $ECHO_N "checking for int_least32_t... $ECHO_C" >&6
+if test "${ac_cv_type_int_least32_t+set}" = set; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+ cat >conftest.$ac_ext <<_ACEOF
+/* confdefs.h. */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h. */
+#include <sys/types.h>
+#include <$i>
+
+int
+main ()
+{
+if ((int_least32_t *) 0)
+ return 0;
+if (sizeof (int_least32_t))
+ return 0;
+ ;
+ return 0;
+}
+_ACEOF
+rm -f conftest.$ac_objext
+if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
+ (eval $ac_compile) 2>conftest.er1
+ ac_status=$?
+ grep -v '^ *+' conftest.er1 >conftest.err
+ rm -f conftest.er1
+ cat conftest.err >&5
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); } &&
+ { ac_try='test -z "$ac_c_werror_flag"
+ || test ! -s conftest.err'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; } &&
+ { ac_try='test -s conftest.$ac_objext'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; }; then
+ ac_cv_type_int_least32_t=yes
+else
+ echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+ac_cv_type_int_least32_t=no
+fi
+rm -f conftest.err conftest.$ac_objext conftest.$ac_ext
+fi
+echo "$as_me:$LINENO: result: $ac_cv_type_int_least32_t" >&5
+echo "${ECHO_T}$ac_cv_type_int_least32_t" >&6
+if test $ac_cv_type_int_least32_t = yes; then
+ :
+else
+ acx_cv_header_stdint_kind="(mostly complete)"
+fi
+
+ echo "$as_me:$LINENO: checking for int_fast32_t" >&5
+echo $ECHO_N "checking for int_fast32_t... $ECHO_C" >&6
+if test "${ac_cv_type_int_fast32_t+set}" = set; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+ cat >conftest.$ac_ext <<_ACEOF
+/* confdefs.h. */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h. */
+#include <sys/types.h>
+#include <$i>
+
+int
+main ()
+{
+if ((int_fast32_t *) 0)
+ return 0;
+if (sizeof (int_fast32_t))
+ return 0;
+ ;
+ return 0;
+}
+_ACEOF
+rm -f conftest.$ac_objext
+if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
+ (eval $ac_compile) 2>conftest.er1
+ ac_status=$?
+ grep -v '^ *+' conftest.er1 >conftest.err
+ rm -f conftest.er1
+ cat conftest.err >&5
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); } &&
+ { ac_try='test -z "$ac_c_werror_flag"
+ || test ! -s conftest.err'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; } &&
+ { ac_try='test -s conftest.$ac_objext'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; }; then
+ ac_cv_type_int_fast32_t=yes
+else
+ echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+ac_cv_type_int_fast32_t=no
+fi
+rm -f conftest.err conftest.$ac_objext conftest.$ac_ext
+fi
+echo "$as_me:$LINENO: result: $ac_cv_type_int_fast32_t" >&5
+echo "${ECHO_T}$ac_cv_type_int_fast32_t" >&6
+if test $ac_cv_type_int_fast32_t = yes; then
+ :
+else
+ acx_cv_header_stdint_kind="(mostly complete)"
+fi
+
+ echo "$as_me:$LINENO: checking for uint64_t" >&5
+echo $ECHO_N "checking for uint64_t... $ECHO_C" >&6
+if test "${ac_cv_type_uint64_t+set}" = set; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+ cat >conftest.$ac_ext <<_ACEOF
+/* confdefs.h. */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h. */
+#include <sys/types.h>
+#include <$i>
+
+int
+main ()
+{
+if ((uint64_t *) 0)
+ return 0;
+if (sizeof (uint64_t))
+ return 0;
+ ;
+ return 0;
+}
+_ACEOF
+rm -f conftest.$ac_objext
+if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
+ (eval $ac_compile) 2>conftest.er1
+ ac_status=$?
+ grep -v '^ *+' conftest.er1 >conftest.err
+ rm -f conftest.er1
+ cat conftest.err >&5
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); } &&
+ { ac_try='test -z "$ac_c_werror_flag"
+ || test ! -s conftest.err'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; } &&
+ { ac_try='test -s conftest.$ac_objext'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; }; then
+ ac_cv_type_uint64_t=yes
+else
+ echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+ac_cv_type_uint64_t=no
+fi
+rm -f conftest.err conftest.$ac_objext conftest.$ac_ext
+fi
+echo "$as_me:$LINENO: result: $ac_cv_type_uint64_t" >&5
+echo "${ECHO_T}$ac_cv_type_uint64_t" >&6
+if test $ac_cv_type_uint64_t = yes; then
+ :
+else
+ acx_cv_header_stdint_kind="(lacks uint64_t)"
+fi
+
+ break
+done
+if test "$acx_cv_header_stdint" = stddef.h; then
+ acx_cv_header_stdint_kind="(lacks uintmax_t)"
+ for i in stdint.h $inttype_headers; do
+ unset ac_cv_type_uintptr_t
+ unset ac_cv_type_uint32_t
+ unset ac_cv_type_uint64_t
+ echo $ECHO_N "looking for an incomplete stdint.h in $i, $ECHO_C" >&6
+ echo "$as_me:$LINENO: checking for uint32_t" >&5
+echo $ECHO_N "checking for uint32_t... $ECHO_C" >&6
+if test "${ac_cv_type_uint32_t+set}" = set; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+ cat >conftest.$ac_ext <<_ACEOF
+/* confdefs.h. */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h. */
+#include <sys/types.h>
+#include <$i>
+
+int
+main ()
+{
+if ((uint32_t *) 0)
+ return 0;
+if (sizeof (uint32_t))
+ return 0;
+ ;
+ return 0;
+}
+_ACEOF
+rm -f conftest.$ac_objext
+if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
+ (eval $ac_compile) 2>conftest.er1
+ ac_status=$?
+ grep -v '^ *+' conftest.er1 >conftest.err
+ rm -f conftest.er1
+ cat conftest.err >&5
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); } &&
+ { ac_try='test -z "$ac_c_werror_flag"
+ || test ! -s conftest.err'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; } &&
+ { ac_try='test -s conftest.$ac_objext'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; }; then
+ ac_cv_type_uint32_t=yes
+else
+ echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+ac_cv_type_uint32_t=no
+fi
+rm -f conftest.err conftest.$ac_objext conftest.$ac_ext
+fi
+echo "$as_me:$LINENO: result: $ac_cv_type_uint32_t" >&5
+echo "${ECHO_T}$ac_cv_type_uint32_t" >&6
+if test $ac_cv_type_uint32_t = yes; then
+ acx_cv_header_stdint=$i
+else
+ continue
+fi
+
+ echo "$as_me:$LINENO: checking for uint64_t" >&5
+echo $ECHO_N "checking for uint64_t... $ECHO_C" >&6
+if test "${ac_cv_type_uint64_t+set}" = set; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+ cat >conftest.$ac_ext <<_ACEOF
+/* confdefs.h. */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h. */
+#include <sys/types.h>
+#include <$i>
+
+int
+main ()
+{
+if ((uint64_t *) 0)
+ return 0;
+if (sizeof (uint64_t))
+ return 0;
+ ;
+ return 0;
+}
+_ACEOF
+rm -f conftest.$ac_objext
+if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
+ (eval $ac_compile) 2>conftest.er1
+ ac_status=$?
+ grep -v '^ *+' conftest.er1 >conftest.err
+ rm -f conftest.er1
+ cat conftest.err >&5
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); } &&
+ { ac_try='test -z "$ac_c_werror_flag"
+ || test ! -s conftest.err'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; } &&
+ { ac_try='test -s conftest.$ac_objext'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; }; then
+ ac_cv_type_uint64_t=yes
+else
+ echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+ac_cv_type_uint64_t=no
+fi
+rm -f conftest.err conftest.$ac_objext conftest.$ac_ext
+fi
+echo "$as_me:$LINENO: result: $ac_cv_type_uint64_t" >&5
+echo "${ECHO_T}$ac_cv_type_uint64_t" >&6
+
+ echo "$as_me:$LINENO: checking for uintptr_t" >&5
+echo $ECHO_N "checking for uintptr_t... $ECHO_C" >&6
+if test "${ac_cv_type_uintptr_t+set}" = set; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+ cat >conftest.$ac_ext <<_ACEOF
+/* confdefs.h. */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h. */
+#include <sys/types.h>
+#include <$i>
+
+int
+main ()
+{
+if ((uintptr_t *) 0)
+ return 0;
+if (sizeof (uintptr_t))
+ return 0;
+ ;
+ return 0;
+}
+_ACEOF
+rm -f conftest.$ac_objext
+if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
+ (eval $ac_compile) 2>conftest.er1
+ ac_status=$?
+ grep -v '^ *+' conftest.er1 >conftest.err
+ rm -f conftest.er1
+ cat conftest.err >&5
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); } &&
+ { ac_try='test -z "$ac_c_werror_flag"
+ || test ! -s conftest.err'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; } &&
+ { ac_try='test -s conftest.$ac_objext'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; }; then
+ ac_cv_type_uintptr_t=yes
+else
+ echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+ac_cv_type_uintptr_t=no
+fi
+rm -f conftest.err conftest.$ac_objext conftest.$ac_ext
+fi
+echo "$as_me:$LINENO: result: $ac_cv_type_uintptr_t" >&5
+echo "${ECHO_T}$ac_cv_type_uintptr_t" >&6
+
+ break
+ done
+fi
+if test "$acx_cv_header_stdint" = stddef.h; then
+ acx_cv_header_stdint_kind="(u_intXX_t style)"
+ for i in sys/types.h $inttype_headers; do
+ unset ac_cv_type_u_int32_t
+ unset ac_cv_type_u_int64_t
+ echo $ECHO_N "looking for u_intXX_t types in $i, $ECHO_C" >&6
+ echo "$as_me:$LINENO: checking for u_int32_t" >&5
+echo $ECHO_N "checking for u_int32_t... $ECHO_C" >&6
+if test "${ac_cv_type_u_int32_t+set}" = set; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+ cat >conftest.$ac_ext <<_ACEOF
+/* confdefs.h. */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h. */
+#include <sys/types.h>
+#include <$i>
+
+int
+main ()
+{
+if ((u_int32_t *) 0)
+ return 0;
+if (sizeof (u_int32_t))
+ return 0;
+ ;
+ return 0;
+}
+_ACEOF
+rm -f conftest.$ac_objext
+if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
+ (eval $ac_compile) 2>conftest.er1
+ ac_status=$?
+ grep -v '^ *+' conftest.er1 >conftest.err
+ rm -f conftest.er1
+ cat conftest.err >&5
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); } &&
+ { ac_try='test -z "$ac_c_werror_flag"
+ || test ! -s conftest.err'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; } &&
+ { ac_try='test -s conftest.$ac_objext'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; }; then
+ ac_cv_type_u_int32_t=yes
+else
+ echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+ac_cv_type_u_int32_t=no
+fi
+rm -f conftest.err conftest.$ac_objext conftest.$ac_ext
+fi
+echo "$as_me:$LINENO: result: $ac_cv_type_u_int32_t" >&5
+echo "${ECHO_T}$ac_cv_type_u_int32_t" >&6
+if test $ac_cv_type_u_int32_t = yes; then
+ acx_cv_header_stdint=$i
+else
+ continue
+fi
+
+ echo "$as_me:$LINENO: checking for u_int64_t" >&5
+echo $ECHO_N "checking for u_int64_t... $ECHO_C" >&6
+if test "${ac_cv_type_u_int64_t+set}" = set; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+ cat >conftest.$ac_ext <<_ACEOF
+/* confdefs.h. */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h. */
+#include <sys/types.h>
+#include <$i>
+
+int
+main ()
+{
+if ((u_int64_t *) 0)
+ return 0;
+if (sizeof (u_int64_t))
+ return 0;
+ ;
+ return 0;
+}
+_ACEOF
+rm -f conftest.$ac_objext
+if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
+ (eval $ac_compile) 2>conftest.er1
+ ac_status=$?
+ grep -v '^ *+' conftest.er1 >conftest.err
+ rm -f conftest.er1
+ cat conftest.err >&5
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); } &&
+ { ac_try='test -z "$ac_c_werror_flag"
+ || test ! -s conftest.err'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; } &&
+ { ac_try='test -s conftest.$ac_objext'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; }; then
+ ac_cv_type_u_int64_t=yes
+else
+ echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+ac_cv_type_u_int64_t=no
+fi
+rm -f conftest.err conftest.$ac_objext conftest.$ac_ext
+fi
+echo "$as_me:$LINENO: result: $ac_cv_type_u_int64_t" >&5
+echo "${ECHO_T}$ac_cv_type_u_int64_t" >&6
+
+ break
+ done
+fi
+if test "$acx_cv_header_stdint" = stddef.h; then
+ acx_cv_header_stdint_kind="(using manual detection)"
+fi
+
+test -z "$ac_cv_type_uintptr_t" && ac_cv_type_uintptr_t=no
+test -z "$ac_cv_type_uint64_t" && ac_cv_type_uint64_t=no
+test -z "$ac_cv_type_u_int64_t" && ac_cv_type_u_int64_t=no
+test -z "$ac_cv_type_int_least32_t" && ac_cv_type_int_least32_t=no
+test -z "$ac_cv_type_int_fast32_t" && ac_cv_type_int_fast32_t=no
+
+# ----------------- Summarize what we found so far
+
+echo "$as_me:$LINENO: checking what to include in gstdint.h" >&5
+echo $ECHO_N "checking what to include in gstdint.h... $ECHO_C" >&6
+
+case `$as_basename gstdint.h ||
+$as_expr X/gstdint.h : '.*/\([^/][^/]*\)/*$' \| \
+ Xgstdint.h : 'X\(//\)$' \| \
+ Xgstdint.h : 'X\(/\)$' \| \
+ . : '\(.\)' 2>/dev/null ||
+echo X/gstdint.h |
+ sed '/^.*\/\([^/][^/]*\)\/*$/{ s//\1/; q; }
+ /^X\/\(\/\/\)$/{ s//\1/; q; }
+ /^X\/\(\/\).*/{ s//\1/; q; }
+ s/.*/./; q'` in
+ stdint.h) { echo "$as_me:$LINENO: WARNING: are you sure you want it there?" >&5
+echo "$as_me: WARNING: are you sure you want it there?" >&2;} ;;
+ inttypes.h) { echo "$as_me:$LINENO: WARNING: are you sure you want it there?" >&5
+echo "$as_me: WARNING: are you sure you want it there?" >&2;} ;;
+ *) ;;
+esac
+
+echo "$as_me:$LINENO: result: $acx_cv_header_stdint $acx_cv_header_stdint_kind" >&5
+echo "${ECHO_T}$acx_cv_header_stdint $acx_cv_header_stdint_kind" >&6
+
+# ----------------- done included file, check C basic types --------
+
+# Lacking an uintptr_t? Test size of void *
+case "$acx_cv_header_stdint:$ac_cv_type_uintptr_t" in
+ stddef.h:* | *:no) echo "$as_me:$LINENO: checking for void *" >&5
+echo $ECHO_N "checking for void *... $ECHO_C" >&6
+if test "${ac_cv_type_void_p+set}" = set; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+ cat >conftest.$ac_ext <<_ACEOF
+/* confdefs.h. */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h. */
+$ac_includes_default
+int
+main ()
+{
+if ((void * *) 0)
+ return 0;
+if (sizeof (void *))
+ return 0;
+ ;
+ return 0;
+}
+_ACEOF
+rm -f conftest.$ac_objext
+if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
+ (eval $ac_compile) 2>conftest.er1
+ ac_status=$?
+ grep -v '^ *+' conftest.er1 >conftest.err
+ rm -f conftest.er1
+ cat conftest.err >&5
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); } &&
+ { ac_try='test -z "$ac_c_werror_flag"
+ || test ! -s conftest.err'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; } &&
+ { ac_try='test -s conftest.$ac_objext'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; }; then
+ ac_cv_type_void_p=yes
+else
+ echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+ac_cv_type_void_p=no
+fi
+rm -f conftest.err conftest.$ac_objext conftest.$ac_ext
+fi
+echo "$as_me:$LINENO: result: $ac_cv_type_void_p" >&5
+echo "${ECHO_T}$ac_cv_type_void_p" >&6
+
+echo "$as_me:$LINENO: checking size of void *" >&5
+echo $ECHO_N "checking size of void *... $ECHO_C" >&6
+if test "${ac_cv_sizeof_void_p+set}" = set; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+ if test "$ac_cv_type_void_p" = yes; then
+ # The cast to unsigned long works around a bug in the HP C Compiler
+ # version HP92453-01 B.11.11.23709.GP, which incorrectly rejects
+ # declarations like `int a3[[(sizeof (unsigned char)) >= 0]];'.
+ # This bug is HP SR number 8606223364.
+ if test "$cross_compiling" = yes; then
+ # Depending upon the size, compute the lo and hi bounds.
+cat >conftest.$ac_ext <<_ACEOF
+/* confdefs.h. */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h. */
+$ac_includes_default
+int
+main ()
+{
+static int test_array [1 - 2 * !(((long) (sizeof (void *))) >= 0)];
+test_array [0] = 0
+
+ ;
+ return 0;
+}
+_ACEOF
+rm -f conftest.$ac_objext
+if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
+ (eval $ac_compile) 2>conftest.er1
+ ac_status=$?
+ grep -v '^ *+' conftest.er1 >conftest.err
+ rm -f conftest.er1
+ cat conftest.err >&5
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); } &&
+ { ac_try='test -z "$ac_c_werror_flag"
+ || test ! -s conftest.err'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; } &&
+ { ac_try='test -s conftest.$ac_objext'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; }; then
+ ac_lo=0 ac_mid=0
+ while :; do
+ cat >conftest.$ac_ext <<_ACEOF
+/* confdefs.h. */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h. */
+$ac_includes_default
+int
+main ()
+{
+static int test_array [1 - 2 * !(((long) (sizeof (void *))) <= $ac_mid)];
+test_array [0] = 0
+
+ ;
+ return 0;
+}
+_ACEOF
+rm -f conftest.$ac_objext
+if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
+ (eval $ac_compile) 2>conftest.er1
+ ac_status=$?
+ grep -v '^ *+' conftest.er1 >conftest.err
+ rm -f conftest.er1
+ cat conftest.err >&5
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); } &&
+ { ac_try='test -z "$ac_c_werror_flag"
+ || test ! -s conftest.err'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; } &&
+ { ac_try='test -s conftest.$ac_objext'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; }; then
+ ac_hi=$ac_mid; break
+else
+ echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+ac_lo=`expr $ac_mid + 1`
+ if test $ac_lo -le $ac_mid; then
+ ac_lo= ac_hi=
+ break
+ fi
+ ac_mid=`expr 2 '*' $ac_mid + 1`
+fi
+rm -f conftest.err conftest.$ac_objext conftest.$ac_ext
+ done
+else
+ echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+cat >conftest.$ac_ext <<_ACEOF
+/* confdefs.h. */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h. */
+$ac_includes_default
+int
+main ()
+{
+static int test_array [1 - 2 * !(((long) (sizeof (void *))) < 0)];
+test_array [0] = 0
+
+ ;
+ return 0;
+}
+_ACEOF
+rm -f conftest.$ac_objext
+if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
+ (eval $ac_compile) 2>conftest.er1
+ ac_status=$?
+ grep -v '^ *+' conftest.er1 >conftest.err
+ rm -f conftest.er1
+ cat conftest.err >&5
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); } &&
+ { ac_try='test -z "$ac_c_werror_flag"
+ || test ! -s conftest.err'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; } &&
+ { ac_try='test -s conftest.$ac_objext'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; }; then
+ ac_hi=-1 ac_mid=-1
+ while :; do
+ cat >conftest.$ac_ext <<_ACEOF
+/* confdefs.h. */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h. */
+$ac_includes_default
+int
+main ()
+{
+static int test_array [1 - 2 * !(((long) (sizeof (void *))) >= $ac_mid)];
+test_array [0] = 0
+
+ ;
+ return 0;
+}
+_ACEOF
+rm -f conftest.$ac_objext
+if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
+ (eval $ac_compile) 2>conftest.er1
+ ac_status=$?
+ grep -v '^ *+' conftest.er1 >conftest.err
+ rm -f conftest.er1
+ cat conftest.err >&5
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); } &&
+ { ac_try='test -z "$ac_c_werror_flag"
+ || test ! -s conftest.err'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; } &&
+ { ac_try='test -s conftest.$ac_objext'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; }; then
+ ac_lo=$ac_mid; break
+else
+ echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+ac_hi=`expr '(' $ac_mid ')' - 1`
+ if test $ac_mid -le $ac_hi; then
+ ac_lo= ac_hi=
+ break
+ fi
+ ac_mid=`expr 2 '*' $ac_mid`
+fi
+rm -f conftest.err conftest.$ac_objext conftest.$ac_ext
+ done
+else
+ echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+ac_lo= ac_hi=
+fi
+rm -f conftest.err conftest.$ac_objext conftest.$ac_ext
+fi
+rm -f conftest.err conftest.$ac_objext conftest.$ac_ext
+# Binary search between lo and hi bounds.
+while test "x$ac_lo" != "x$ac_hi"; do
+ ac_mid=`expr '(' $ac_hi - $ac_lo ')' / 2 + $ac_lo`
+ cat >conftest.$ac_ext <<_ACEOF
+/* confdefs.h. */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h. */
+$ac_includes_default
+int
+main ()
+{
+static int test_array [1 - 2 * !(((long) (sizeof (void *))) <= $ac_mid)];
+test_array [0] = 0
+
+ ;
+ return 0;
+}
+_ACEOF
+rm -f conftest.$ac_objext
+if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
+ (eval $ac_compile) 2>conftest.er1
+ ac_status=$?
+ grep -v '^ *+' conftest.er1 >conftest.err
+ rm -f conftest.er1
+ cat conftest.err >&5
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); } &&
+ { ac_try='test -z "$ac_c_werror_flag"
+ || test ! -s conftest.err'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; } &&
+ { ac_try='test -s conftest.$ac_objext'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; }; then
+ ac_hi=$ac_mid
+else
+ echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+ac_lo=`expr '(' $ac_mid ')' + 1`
+fi
+rm -f conftest.err conftest.$ac_objext conftest.$ac_ext
+done
+case $ac_lo in
+?*) ac_cv_sizeof_void_p=$ac_lo;;
+'') { { echo "$as_me:$LINENO: error: cannot compute sizeof (void *), 77
+See \`config.log' for more details." >&5
+echo "$as_me: error: cannot compute sizeof (void *), 77
+See \`config.log' for more details." >&2;}
+ { (exit 1); exit 1; }; } ;;
+esac
+else
+ if test "$cross_compiling" = yes; then
+ { { echo "$as_me:$LINENO: error: cannot run test program while cross compiling
+See \`config.log' for more details." >&5
+echo "$as_me: error: cannot run test program while cross compiling
+See \`config.log' for more details." >&2;}
+ { (exit 1); exit 1; }; }
+else
+ cat >conftest.$ac_ext <<_ACEOF
+/* confdefs.h. */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h. */
+$ac_includes_default
+long longval () { return (long) (sizeof (void *)); }
+unsigned long ulongval () { return (long) (sizeof (void *)); }
+#include <stdio.h>
+#include <stdlib.h>
+int
+main ()
+{
+
+ FILE *f = fopen ("conftest.val", "w");
+ if (! f)
+ exit (1);
+ if (((long) (sizeof (void *))) < 0)
+ {
+ long i = longval ();
+ if (i != ((long) (sizeof (void *))))
+ exit (1);
+ fprintf (f, "%ld\n", i);
+ }
+ else
+ {
+ unsigned long i = ulongval ();
+ if (i != ((long) (sizeof (void *))))
+ exit (1);
+ fprintf (f, "%lu\n", i);
+ }
+ exit (ferror (f) || fclose (f) != 0);
+
+ ;
+ return 0;
+}
+_ACEOF
+rm -f conftest$ac_exeext
+if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
+ (eval $ac_link) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); } && { ac_try='./conftest$ac_exeext'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; }; then
+ ac_cv_sizeof_void_p=`cat conftest.val`
+else
+ echo "$as_me: program exited with status $ac_status" >&5
+echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+( exit $ac_status )
+{ { echo "$as_me:$LINENO: error: cannot compute sizeof (void *), 77
+See \`config.log' for more details." >&5
+echo "$as_me: error: cannot compute sizeof (void *), 77
+See \`config.log' for more details." >&2;}
+ { (exit 1); exit 1; }; }
+fi
+rm -f core *.core gmon.out bb.out conftest$ac_exeext conftest.$ac_objext conftest.$ac_ext
+fi
+fi
+rm -f conftest.val
+else
+ ac_cv_sizeof_void_p=0
+fi
+fi
+echo "$as_me:$LINENO: result: $ac_cv_sizeof_void_p" >&5
+echo "${ECHO_T}$ac_cv_sizeof_void_p" >&6
+cat >>confdefs.h <<_ACEOF
+#define SIZEOF_VOID_P $ac_cv_sizeof_void_p
+_ACEOF
+
+ ;;
+esac
+
+# Lacking an uint64_t? Test size of long
+case "$acx_cv_header_stdint:$ac_cv_type_uint64_t:$ac_cv_type_u_int64_t" in
+ stddef.h:*:* | *:no:no) echo "$as_me:$LINENO: checking for long" >&5
+echo $ECHO_N "checking for long... $ECHO_C" >&6
+if test "${ac_cv_type_long+set}" = set; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+ cat >conftest.$ac_ext <<_ACEOF
+/* confdefs.h. */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h. */
+$ac_includes_default
+int
+main ()
+{
+if ((long *) 0)
+ return 0;
+if (sizeof (long))
+ return 0;
+ ;
+ return 0;
+}
+_ACEOF
+rm -f conftest.$ac_objext
+if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
+ (eval $ac_compile) 2>conftest.er1
+ ac_status=$?
+ grep -v '^ *+' conftest.er1 >conftest.err
+ rm -f conftest.er1
+ cat conftest.err >&5
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); } &&
+ { ac_try='test -z "$ac_c_werror_flag"
+ || test ! -s conftest.err'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; } &&
+ { ac_try='test -s conftest.$ac_objext'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; }; then
+ ac_cv_type_long=yes
+else
+ echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+ac_cv_type_long=no
+fi
+rm -f conftest.err conftest.$ac_objext conftest.$ac_ext
+fi
+echo "$as_me:$LINENO: result: $ac_cv_type_long" >&5
+echo "${ECHO_T}$ac_cv_type_long" >&6
+
+echo "$as_me:$LINENO: checking size of long" >&5
+echo $ECHO_N "checking size of long... $ECHO_C" >&6
+if test "${ac_cv_sizeof_long+set}" = set; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+ if test "$ac_cv_type_long" = yes; then
+ # The cast to unsigned long works around a bug in the HP C Compiler
+ # version HP92453-01 B.11.11.23709.GP, which incorrectly rejects
+ # declarations like `int a3[[(sizeof (unsigned char)) >= 0]];'.
+ # This bug is HP SR number 8606223364.
+ if test "$cross_compiling" = yes; then
+ # Depending upon the size, compute the lo and hi bounds.
+cat >conftest.$ac_ext <<_ACEOF
+/* confdefs.h. */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h. */
+$ac_includes_default
+int
+main ()
+{
+static int test_array [1 - 2 * !(((long) (sizeof (long))) >= 0)];
+test_array [0] = 0
+
+ ;
+ return 0;
+}
+_ACEOF
+rm -f conftest.$ac_objext
+if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
+ (eval $ac_compile) 2>conftest.er1
+ ac_status=$?
+ grep -v '^ *+' conftest.er1 >conftest.err
+ rm -f conftest.er1
+ cat conftest.err >&5
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); } &&
+ { ac_try='test -z "$ac_c_werror_flag"
+ || test ! -s conftest.err'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; } &&
+ { ac_try='test -s conftest.$ac_objext'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; }; then
+ ac_lo=0 ac_mid=0
+ while :; do
+ cat >conftest.$ac_ext <<_ACEOF
+/* confdefs.h. */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h. */
+$ac_includes_default
+int
+main ()
+{
+static int test_array [1 - 2 * !(((long) (sizeof (long))) <= $ac_mid)];
+test_array [0] = 0
+
+ ;
+ return 0;
+}
+_ACEOF
+rm -f conftest.$ac_objext
+if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
+ (eval $ac_compile) 2>conftest.er1
+ ac_status=$?
+ grep -v '^ *+' conftest.er1 >conftest.err
+ rm -f conftest.er1
+ cat conftest.err >&5
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); } &&
+ { ac_try='test -z "$ac_c_werror_flag"
+ || test ! -s conftest.err'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; } &&
+ { ac_try='test -s conftest.$ac_objext'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; }; then
+ ac_hi=$ac_mid; break
+else
+ echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+ac_lo=`expr $ac_mid + 1`
+ if test $ac_lo -le $ac_mid; then
+ ac_lo= ac_hi=
+ break
+ fi
+ ac_mid=`expr 2 '*' $ac_mid + 1`
+fi
+rm -f conftest.err conftest.$ac_objext conftest.$ac_ext
+ done
+else
+ echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+cat >conftest.$ac_ext <<_ACEOF
+/* confdefs.h. */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h. */
+$ac_includes_default
+int
+main ()
+{
+static int test_array [1 - 2 * !(((long) (sizeof (long))) < 0)];
+test_array [0] = 0
+
+ ;
+ return 0;
+}
+_ACEOF
+rm -f conftest.$ac_objext
+if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
+ (eval $ac_compile) 2>conftest.er1
+ ac_status=$?
+ grep -v '^ *+' conftest.er1 >conftest.err
+ rm -f conftest.er1
+ cat conftest.err >&5
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); } &&
+ { ac_try='test -z "$ac_c_werror_flag"
+ || test ! -s conftest.err'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; } &&
+ { ac_try='test -s conftest.$ac_objext'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; }; then
+ ac_hi=-1 ac_mid=-1
+ while :; do
+ cat >conftest.$ac_ext <<_ACEOF
+/* confdefs.h. */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h. */
+$ac_includes_default
+int
+main ()
+{
+static int test_array [1 - 2 * !(((long) (sizeof (long))) >= $ac_mid)];
+test_array [0] = 0
+
+ ;
+ return 0;
+}
+_ACEOF
+rm -f conftest.$ac_objext
+if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
+ (eval $ac_compile) 2>conftest.er1
+ ac_status=$?
+ grep -v '^ *+' conftest.er1 >conftest.err
+ rm -f conftest.er1
+ cat conftest.err >&5
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); } &&
+ { ac_try='test -z "$ac_c_werror_flag"
+ || test ! -s conftest.err'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; } &&
+ { ac_try='test -s conftest.$ac_objext'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; }; then
+ ac_lo=$ac_mid; break
+else
+ echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+ac_hi=`expr '(' $ac_mid ')' - 1`
+ if test $ac_mid -le $ac_hi; then
+ ac_lo= ac_hi=
+ break
+ fi
+ ac_mid=`expr 2 '*' $ac_mid`
+fi
+rm -f conftest.err conftest.$ac_objext conftest.$ac_ext
+ done
+else
+ echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+ac_lo= ac_hi=
+fi
+rm -f conftest.err conftest.$ac_objext conftest.$ac_ext
+fi
+rm -f conftest.err conftest.$ac_objext conftest.$ac_ext
+# Binary search between lo and hi bounds.
+while test "x$ac_lo" != "x$ac_hi"; do
+ ac_mid=`expr '(' $ac_hi - $ac_lo ')' / 2 + $ac_lo`
+ cat >conftest.$ac_ext <<_ACEOF
+/* confdefs.h. */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h. */
+$ac_includes_default
+int
+main ()
+{
+static int test_array [1 - 2 * !(((long) (sizeof (long))) <= $ac_mid)];
+test_array [0] = 0
+
+ ;
+ return 0;
+}
+_ACEOF
+rm -f conftest.$ac_objext
+if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
+ (eval $ac_compile) 2>conftest.er1
+ ac_status=$?
+ grep -v '^ *+' conftest.er1 >conftest.err
+ rm -f conftest.er1
+ cat conftest.err >&5
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); } &&
+ { ac_try='test -z "$ac_c_werror_flag"
+ || test ! -s conftest.err'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; } &&
+ { ac_try='test -s conftest.$ac_objext'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; }; then
+ ac_hi=$ac_mid
+else
+ echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+ac_lo=`expr '(' $ac_mid ')' + 1`
+fi
+rm -f conftest.err conftest.$ac_objext conftest.$ac_ext
+done
+case $ac_lo in
+?*) ac_cv_sizeof_long=$ac_lo;;
+'') { { echo "$as_me:$LINENO: error: cannot compute sizeof (long), 77
+See \`config.log' for more details." >&5
+echo "$as_me: error: cannot compute sizeof (long), 77
+See \`config.log' for more details." >&2;}
+ { (exit 1); exit 1; }; } ;;
+esac
+else
+ if test "$cross_compiling" = yes; then
+ { { echo "$as_me:$LINENO: error: cannot run test program while cross compiling
+See \`config.log' for more details." >&5
+echo "$as_me: error: cannot run test program while cross compiling
+See \`config.log' for more details." >&2;}
+ { (exit 1); exit 1; }; }
+else
+ cat >conftest.$ac_ext <<_ACEOF
+/* confdefs.h. */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h. */
+$ac_includes_default
+long longval () { return (long) (sizeof (long)); }
+unsigned long ulongval () { return (long) (sizeof (long)); }
+#include <stdio.h>
+#include <stdlib.h>
+int
+main ()
+{
+
+ FILE *f = fopen ("conftest.val", "w");
+ if (! f)
+ exit (1);
+ if (((long) (sizeof (long))) < 0)
+ {
+ long i = longval ();
+ if (i != ((long) (sizeof (long))))
+ exit (1);
+ fprintf (f, "%ld\n", i);
+ }
+ else
+ {
+ unsigned long i = ulongval ();
+ if (i != ((long) (sizeof (long))))
+ exit (1);
+ fprintf (f, "%lu\n", i);
+ }
+ exit (ferror (f) || fclose (f) != 0);
+
+ ;
+ return 0;
+}
+_ACEOF
+rm -f conftest$ac_exeext
+if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
+ (eval $ac_link) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); } && { ac_try='./conftest$ac_exeext'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; }; then
+ ac_cv_sizeof_long=`cat conftest.val`
+else
+ echo "$as_me: program exited with status $ac_status" >&5
+echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+( exit $ac_status )
+{ { echo "$as_me:$LINENO: error: cannot compute sizeof (long), 77
+See \`config.log' for more details." >&5
+echo "$as_me: error: cannot compute sizeof (long), 77
+See \`config.log' for more details." >&2;}
+ { (exit 1); exit 1; }; }
+fi
+rm -f core *.core gmon.out bb.out conftest$ac_exeext conftest.$ac_objext conftest.$ac_ext
+fi
+fi
+rm -f conftest.val
+else
+ ac_cv_sizeof_long=0
+fi
+fi
+echo "$as_me:$LINENO: result: $ac_cv_sizeof_long" >&5
+echo "${ECHO_T}$ac_cv_sizeof_long" >&6
+cat >>confdefs.h <<_ACEOF
+#define SIZEOF_LONG $ac_cv_sizeof_long
+_ACEOF
+
+ ;;
+esac
+
+if test $acx_cv_header_stdint = stddef.h; then
+ # Lacking a good header? Test size of everything and deduce all types.
+ echo "$as_me:$LINENO: checking for int" >&5
+echo $ECHO_N "checking for int... $ECHO_C" >&6
+if test "${ac_cv_type_int+set}" = set; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+ cat >conftest.$ac_ext <<_ACEOF
+/* confdefs.h. */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h. */
+$ac_includes_default
+int
+main ()
+{
+if ((int *) 0)
+ return 0;
+if (sizeof (int))
+ return 0;
+ ;
+ return 0;
+}
+_ACEOF
+rm -f conftest.$ac_objext
+if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
+ (eval $ac_compile) 2>conftest.er1
+ ac_status=$?
+ grep -v '^ *+' conftest.er1 >conftest.err
+ rm -f conftest.er1
+ cat conftest.err >&5
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); } &&
+ { ac_try='test -z "$ac_c_werror_flag"
+ || test ! -s conftest.err'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; } &&
+ { ac_try='test -s conftest.$ac_objext'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; }; then
+ ac_cv_type_int=yes
+else
+ echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+ac_cv_type_int=no
+fi
+rm -f conftest.err conftest.$ac_objext conftest.$ac_ext
+fi
+echo "$as_me:$LINENO: result: $ac_cv_type_int" >&5
+echo "${ECHO_T}$ac_cv_type_int" >&6
+
+echo "$as_me:$LINENO: checking size of int" >&5
+echo $ECHO_N "checking size of int... $ECHO_C" >&6
+if test "${ac_cv_sizeof_int+set}" = set; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+ if test "$ac_cv_type_int" = yes; then
+ # The cast to unsigned long works around a bug in the HP C Compiler
+ # version HP92453-01 B.11.11.23709.GP, which incorrectly rejects
+ # declarations like `int a3[[(sizeof (unsigned char)) >= 0]];'.
+ # This bug is HP SR number 8606223364.
+ if test "$cross_compiling" = yes; then
+ # Depending upon the size, compute the lo and hi bounds.
+cat >conftest.$ac_ext <<_ACEOF
+/* confdefs.h. */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h. */
+$ac_includes_default
+int
+main ()
+{
+static int test_array [1 - 2 * !(((long) (sizeof (int))) >= 0)];
+test_array [0] = 0
+
+ ;
+ return 0;
+}
+_ACEOF
+rm -f conftest.$ac_objext
+if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
+ (eval $ac_compile) 2>conftest.er1
+ ac_status=$?
+ grep -v '^ *+' conftest.er1 >conftest.err
+ rm -f conftest.er1
+ cat conftest.err >&5
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); } &&
+ { ac_try='test -z "$ac_c_werror_flag"
+ || test ! -s conftest.err'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; } &&
+ { ac_try='test -s conftest.$ac_objext'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; }; then
+ ac_lo=0 ac_mid=0
+ while :; do
+ cat >conftest.$ac_ext <<_ACEOF
+/* confdefs.h. */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h. */
+$ac_includes_default
+int
+main ()
+{
+static int test_array [1 - 2 * !(((long) (sizeof (int))) <= $ac_mid)];
+test_array [0] = 0
+
+ ;
+ return 0;
+}
+_ACEOF
+rm -f conftest.$ac_objext
+if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
+ (eval $ac_compile) 2>conftest.er1
+ ac_status=$?
+ grep -v '^ *+' conftest.er1 >conftest.err
+ rm -f conftest.er1
+ cat conftest.err >&5
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); } &&
+ { ac_try='test -z "$ac_c_werror_flag"
+ || test ! -s conftest.err'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; } &&
+ { ac_try='test -s conftest.$ac_objext'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; }; then
+ ac_hi=$ac_mid; break
+else
+ echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+ac_lo=`expr $ac_mid + 1`
+ if test $ac_lo -le $ac_mid; then
+ ac_lo= ac_hi=
+ break
+ fi
+ ac_mid=`expr 2 '*' $ac_mid + 1`
+fi
+rm -f conftest.err conftest.$ac_objext conftest.$ac_ext
+ done
+else
+ echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+cat >conftest.$ac_ext <<_ACEOF
+/* confdefs.h. */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h. */
+$ac_includes_default
+int
+main ()
+{
+static int test_array [1 - 2 * !(((long) (sizeof (int))) < 0)];
+test_array [0] = 0
+
+ ;
+ return 0;
+}
+_ACEOF
+rm -f conftest.$ac_objext
+if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
+ (eval $ac_compile) 2>conftest.er1
+ ac_status=$?
+ grep -v '^ *+' conftest.er1 >conftest.err
+ rm -f conftest.er1
+ cat conftest.err >&5
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); } &&
+ { ac_try='test -z "$ac_c_werror_flag"
+ || test ! -s conftest.err'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; } &&
+ { ac_try='test -s conftest.$ac_objext'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; }; then
+ ac_hi=-1 ac_mid=-1
+ while :; do
+ cat >conftest.$ac_ext <<_ACEOF
+/* confdefs.h. */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h. */
+$ac_includes_default
+int
+main ()
+{
+static int test_array [1 - 2 * !(((long) (sizeof (int))) >= $ac_mid)];
+test_array [0] = 0
+
+ ;
+ return 0;
+}
+_ACEOF
+rm -f conftest.$ac_objext
+if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
+ (eval $ac_compile) 2>conftest.er1
+ ac_status=$?
+ grep -v '^ *+' conftest.er1 >conftest.err
+ rm -f conftest.er1
+ cat conftest.err >&5
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); } &&
+ { ac_try='test -z "$ac_c_werror_flag"
+ || test ! -s conftest.err'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; } &&
+ { ac_try='test -s conftest.$ac_objext'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; }; then
+ ac_lo=$ac_mid; break
+else
+ echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+ac_hi=`expr '(' $ac_mid ')' - 1`
+ if test $ac_mid -le $ac_hi; then
+ ac_lo= ac_hi=
+ break
+ fi
+ ac_mid=`expr 2 '*' $ac_mid`
+fi
+rm -f conftest.err conftest.$ac_objext conftest.$ac_ext
+ done
+else
+ echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+ac_lo= ac_hi=
+fi
+rm -f conftest.err conftest.$ac_objext conftest.$ac_ext
+fi
+rm -f conftest.err conftest.$ac_objext conftest.$ac_ext
+# Binary search between lo and hi bounds.
+while test "x$ac_lo" != "x$ac_hi"; do
+ ac_mid=`expr '(' $ac_hi - $ac_lo ')' / 2 + $ac_lo`
+ cat >conftest.$ac_ext <<_ACEOF
+/* confdefs.h. */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h. */
+$ac_includes_default
+int
+main ()
+{
+static int test_array [1 - 2 * !(((long) (sizeof (int))) <= $ac_mid)];
+test_array [0] = 0
+
+ ;
+ return 0;
+}
+_ACEOF
+rm -f conftest.$ac_objext
+if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
+ (eval $ac_compile) 2>conftest.er1
+ ac_status=$?
+ grep -v '^ *+' conftest.er1 >conftest.err
+ rm -f conftest.er1
+ cat conftest.err >&5
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); } &&
+ { ac_try='test -z "$ac_c_werror_flag"
+ || test ! -s conftest.err'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; } &&
+ { ac_try='test -s conftest.$ac_objext'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; }; then
+ ac_hi=$ac_mid
+else
+ echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+ac_lo=`expr '(' $ac_mid ')' + 1`
+fi
+rm -f conftest.err conftest.$ac_objext conftest.$ac_ext
+done
+case $ac_lo in
+?*) ac_cv_sizeof_int=$ac_lo;;
+'') { { echo "$as_me:$LINENO: error: cannot compute sizeof (int), 77
+See \`config.log' for more details." >&5
+echo "$as_me: error: cannot compute sizeof (int), 77
+See \`config.log' for more details." >&2;}
+ { (exit 1); exit 1; }; } ;;
+esac
+else
+ if test "$cross_compiling" = yes; then
+ { { echo "$as_me:$LINENO: error: cannot run test program while cross compiling
+See \`config.log' for more details." >&5
+echo "$as_me: error: cannot run test program while cross compiling
+See \`config.log' for more details." >&2;}
+ { (exit 1); exit 1; }; }
+else
+ cat >conftest.$ac_ext <<_ACEOF
+/* confdefs.h. */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h. */
+$ac_includes_default
+long longval () { return (long) (sizeof (int)); }
+unsigned long ulongval () { return (long) (sizeof (int)); }
+#include <stdio.h>
+#include <stdlib.h>
+int
+main ()
+{
+
+ FILE *f = fopen ("conftest.val", "w");
+ if (! f)
+ exit (1);
+ if (((long) (sizeof (int))) < 0)
+ {
+ long i = longval ();
+ if (i != ((long) (sizeof (int))))
+ exit (1);
+ fprintf (f, "%ld\n", i);
+ }
+ else
+ {
+ unsigned long i = ulongval ();
+ if (i != ((long) (sizeof (int))))
+ exit (1);
+ fprintf (f, "%lu\n", i);
+ }
+ exit (ferror (f) || fclose (f) != 0);
+
+ ;
+ return 0;
+}
+_ACEOF
+rm -f conftest$ac_exeext
+if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
+ (eval $ac_link) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); } && { ac_try='./conftest$ac_exeext'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; }; then
+ ac_cv_sizeof_int=`cat conftest.val`
+else
+ echo "$as_me: program exited with status $ac_status" >&5
+echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+( exit $ac_status )
+{ { echo "$as_me:$LINENO: error: cannot compute sizeof (int), 77
+See \`config.log' for more details." >&5
+echo "$as_me: error: cannot compute sizeof (int), 77
+See \`config.log' for more details." >&2;}
+ { (exit 1); exit 1; }; }
+fi
+rm -f core *.core gmon.out bb.out conftest$ac_exeext conftest.$ac_objext conftest.$ac_ext
+fi
+fi
+rm -f conftest.val
+else
+ ac_cv_sizeof_int=0
+fi
+fi
+echo "$as_me:$LINENO: result: $ac_cv_sizeof_int" >&5
+echo "${ECHO_T}$ac_cv_sizeof_int" >&6
+cat >>confdefs.h <<_ACEOF
+#define SIZEOF_INT $ac_cv_sizeof_int
+_ACEOF
+
+
+ echo "$as_me:$LINENO: checking for short" >&5
+echo $ECHO_N "checking for short... $ECHO_C" >&6
+if test "${ac_cv_type_short+set}" = set; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+ cat >conftest.$ac_ext <<_ACEOF
+/* confdefs.h. */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h. */
+$ac_includes_default
+int
+main ()
+{
+if ((short *) 0)
+ return 0;
+if (sizeof (short))
+ return 0;
+ ;
+ return 0;
+}
+_ACEOF
+rm -f conftest.$ac_objext
+if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
+ (eval $ac_compile) 2>conftest.er1
+ ac_status=$?
+ grep -v '^ *+' conftest.er1 >conftest.err
+ rm -f conftest.er1
+ cat conftest.err >&5
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); } &&
+ { ac_try='test -z "$ac_c_werror_flag"
+ || test ! -s conftest.err'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; } &&
+ { ac_try='test -s conftest.$ac_objext'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; }; then
+ ac_cv_type_short=yes
+else
+ echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+ac_cv_type_short=no
+fi
+rm -f conftest.err conftest.$ac_objext conftest.$ac_ext
+fi
+echo "$as_me:$LINENO: result: $ac_cv_type_short" >&5
+echo "${ECHO_T}$ac_cv_type_short" >&6
+
+echo "$as_me:$LINENO: checking size of short" >&5
+echo $ECHO_N "checking size of short... $ECHO_C" >&6
+if test "${ac_cv_sizeof_short+set}" = set; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+ if test "$ac_cv_type_short" = yes; then
+ # The cast to unsigned long works around a bug in the HP C Compiler
+ # version HP92453-01 B.11.11.23709.GP, which incorrectly rejects
+ # declarations like `int a3[[(sizeof (unsigned char)) >= 0]];'.
+ # This bug is HP SR number 8606223364.
+ if test "$cross_compiling" = yes; then
+ # Depending upon the size, compute the lo and hi bounds.
+cat >conftest.$ac_ext <<_ACEOF
+/* confdefs.h. */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h. */
+$ac_includes_default
+int
+main ()
+{
+static int test_array [1 - 2 * !(((long) (sizeof (short))) >= 0)];
+test_array [0] = 0
+
+ ;
+ return 0;
+}
+_ACEOF
+rm -f conftest.$ac_objext
+if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
+ (eval $ac_compile) 2>conftest.er1
+ ac_status=$?
+ grep -v '^ *+' conftest.er1 >conftest.err
+ rm -f conftest.er1
+ cat conftest.err >&5
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); } &&
+ { ac_try='test -z "$ac_c_werror_flag"
+ || test ! -s conftest.err'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; } &&
+ { ac_try='test -s conftest.$ac_objext'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; }; then
+ ac_lo=0 ac_mid=0
+ while :; do
+ cat >conftest.$ac_ext <<_ACEOF
+/* confdefs.h. */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h. */
+$ac_includes_default
+int
+main ()
+{
+static int test_array [1 - 2 * !(((long) (sizeof (short))) <= $ac_mid)];
+test_array [0] = 0
+
+ ;
+ return 0;
+}
+_ACEOF
+rm -f conftest.$ac_objext
+if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
+ (eval $ac_compile) 2>conftest.er1
+ ac_status=$?
+ grep -v '^ *+' conftest.er1 >conftest.err
+ rm -f conftest.er1
+ cat conftest.err >&5
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); } &&
+ { ac_try='test -z "$ac_c_werror_flag"
+ || test ! -s conftest.err'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; } &&
+ { ac_try='test -s conftest.$ac_objext'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; }; then
+ ac_hi=$ac_mid; break
+else
+ echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+ac_lo=`expr $ac_mid + 1`
+ if test $ac_lo -le $ac_mid; then
+ ac_lo= ac_hi=
+ break
+ fi
+ ac_mid=`expr 2 '*' $ac_mid + 1`
+fi
+rm -f conftest.err conftest.$ac_objext conftest.$ac_ext
+ done
+else
+ echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+cat >conftest.$ac_ext <<_ACEOF
+/* confdefs.h. */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h. */
+$ac_includes_default
+int
+main ()
+{
+static int test_array [1 - 2 * !(((long) (sizeof (short))) < 0)];
+test_array [0] = 0
+
+ ;
+ return 0;
+}
+_ACEOF
+rm -f conftest.$ac_objext
+if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
+ (eval $ac_compile) 2>conftest.er1
+ ac_status=$?
+ grep -v '^ *+' conftest.er1 >conftest.err
+ rm -f conftest.er1
+ cat conftest.err >&5
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); } &&
+ { ac_try='test -z "$ac_c_werror_flag"
+ || test ! -s conftest.err'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; } &&
+ { ac_try='test -s conftest.$ac_objext'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; }; then
+ ac_hi=-1 ac_mid=-1
+ while :; do
+ cat >conftest.$ac_ext <<_ACEOF
+/* confdefs.h. */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h. */
+$ac_includes_default
+int
+main ()
+{
+static int test_array [1 - 2 * !(((long) (sizeof (short))) >= $ac_mid)];
+test_array [0] = 0
+
+ ;
+ return 0;
+}
+_ACEOF
+rm -f conftest.$ac_objext
+if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
+ (eval $ac_compile) 2>conftest.er1
+ ac_status=$?
+ grep -v '^ *+' conftest.er1 >conftest.err
+ rm -f conftest.er1
+ cat conftest.err >&5
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); } &&
+ { ac_try='test -z "$ac_c_werror_flag"
+ || test ! -s conftest.err'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; } &&
+ { ac_try='test -s conftest.$ac_objext'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; }; then
+ ac_lo=$ac_mid; break
+else
+ echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+ac_hi=`expr '(' $ac_mid ')' - 1`
+ if test $ac_mid -le $ac_hi; then
+ ac_lo= ac_hi=
+ break
+ fi
+ ac_mid=`expr 2 '*' $ac_mid`
+fi
+rm -f conftest.err conftest.$ac_objext conftest.$ac_ext
+ done
+else
+ echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+ac_lo= ac_hi=
+fi
+rm -f conftest.err conftest.$ac_objext conftest.$ac_ext
+fi
+rm -f conftest.err conftest.$ac_objext conftest.$ac_ext
+# Binary search between lo and hi bounds.
+while test "x$ac_lo" != "x$ac_hi"; do
+ ac_mid=`expr '(' $ac_hi - $ac_lo ')' / 2 + $ac_lo`
+ cat >conftest.$ac_ext <<_ACEOF
+/* confdefs.h. */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h. */
+$ac_includes_default
+int
+main ()
+{
+static int test_array [1 - 2 * !(((long) (sizeof (short))) <= $ac_mid)];
+test_array [0] = 0
+
+ ;
+ return 0;
+}
+_ACEOF
+rm -f conftest.$ac_objext
+if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
+ (eval $ac_compile) 2>conftest.er1
+ ac_status=$?
+ grep -v '^ *+' conftest.er1 >conftest.err
+ rm -f conftest.er1
+ cat conftest.err >&5
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); } &&
+ { ac_try='test -z "$ac_c_werror_flag"
+ || test ! -s conftest.err'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; } &&
+ { ac_try='test -s conftest.$ac_objext'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; }; then
+ ac_hi=$ac_mid
+else
+ echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+ac_lo=`expr '(' $ac_mid ')' + 1`
+fi
+rm -f conftest.err conftest.$ac_objext conftest.$ac_ext
+done
+case $ac_lo in
+?*) ac_cv_sizeof_short=$ac_lo;;
+'') { { echo "$as_me:$LINENO: error: cannot compute sizeof (short), 77
+See \`config.log' for more details." >&5
+echo "$as_me: error: cannot compute sizeof (short), 77
+See \`config.log' for more details." >&2;}
+ { (exit 1); exit 1; }; } ;;
+esac
+else
+ if test "$cross_compiling" = yes; then
+ { { echo "$as_me:$LINENO: error: cannot run test program while cross compiling
+See \`config.log' for more details." >&5
+echo "$as_me: error: cannot run test program while cross compiling
+See \`config.log' for more details." >&2;}
+ { (exit 1); exit 1; }; }
+else
+ cat >conftest.$ac_ext <<_ACEOF
+/* confdefs.h. */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h. */
+$ac_includes_default
+long longval () { return (long) (sizeof (short)); }
+unsigned long ulongval () { return (long) (sizeof (short)); }
+#include <stdio.h>
+#include <stdlib.h>
+int
+main ()
+{
+
+ FILE *f = fopen ("conftest.val", "w");
+ if (! f)
+ exit (1);
+ if (((long) (sizeof (short))) < 0)
+ {
+ long i = longval ();
+ if (i != ((long) (sizeof (short))))
+ exit (1);
+ fprintf (f, "%ld\n", i);
+ }
+ else
+ {
+ unsigned long i = ulongval ();
+ if (i != ((long) (sizeof (short))))
+ exit (1);
+ fprintf (f, "%lu\n", i);
+ }
+ exit (ferror (f) || fclose (f) != 0);
+
+ ;
+ return 0;
+}
+_ACEOF
+rm -f conftest$ac_exeext
+if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
+ (eval $ac_link) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); } && { ac_try='./conftest$ac_exeext'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; }; then
+ ac_cv_sizeof_short=`cat conftest.val`
+else
+ echo "$as_me: program exited with status $ac_status" >&5
+echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+( exit $ac_status )
+{ { echo "$as_me:$LINENO: error: cannot compute sizeof (short), 77
+See \`config.log' for more details." >&5
+echo "$as_me: error: cannot compute sizeof (short), 77
+See \`config.log' for more details." >&2;}
+ { (exit 1); exit 1; }; }
+fi
+rm -f core *.core gmon.out bb.out conftest$ac_exeext conftest.$ac_objext conftest.$ac_ext
+fi
+fi
+rm -f conftest.val
+else
+ ac_cv_sizeof_short=0
+fi
+fi
+echo "$as_me:$LINENO: result: $ac_cv_sizeof_short" >&5
+echo "${ECHO_T}$ac_cv_sizeof_short" >&6
+cat >>confdefs.h <<_ACEOF
+#define SIZEOF_SHORT $ac_cv_sizeof_short
+_ACEOF
+
+
+ echo "$as_me:$LINENO: checking for char" >&5
+echo $ECHO_N "checking for char... $ECHO_C" >&6
+if test "${ac_cv_type_char+set}" = set; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+ cat >conftest.$ac_ext <<_ACEOF
+/* confdefs.h. */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h. */
+$ac_includes_default
+int
+main ()
+{
+if ((char *) 0)
+ return 0;
+if (sizeof (char))
+ return 0;
+ ;
+ return 0;
+}
+_ACEOF
+rm -f conftest.$ac_objext
+if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
+ (eval $ac_compile) 2>conftest.er1
+ ac_status=$?
+ grep -v '^ *+' conftest.er1 >conftest.err
+ rm -f conftest.er1
+ cat conftest.err >&5
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); } &&
+ { ac_try='test -z "$ac_c_werror_flag"
+ || test ! -s conftest.err'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; } &&
+ { ac_try='test -s conftest.$ac_objext'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; }; then
+ ac_cv_type_char=yes
+else
+ echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+ac_cv_type_char=no
+fi
+rm -f conftest.err conftest.$ac_objext conftest.$ac_ext
+fi
+echo "$as_me:$LINENO: result: $ac_cv_type_char" >&5
+echo "${ECHO_T}$ac_cv_type_char" >&6
+
+echo "$as_me:$LINENO: checking size of char" >&5
+echo $ECHO_N "checking size of char... $ECHO_C" >&6
+if test "${ac_cv_sizeof_char+set}" = set; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+ if test "$ac_cv_type_char" = yes; then
+ # The cast to unsigned long works around a bug in the HP C Compiler
+ # version HP92453-01 B.11.11.23709.GP, which incorrectly rejects
+ # declarations like `int a3[[(sizeof (unsigned char)) >= 0]];'.
+ # This bug is HP SR number 8606223364.
+ if test "$cross_compiling" = yes; then
+ # Depending upon the size, compute the lo and hi bounds.
+cat >conftest.$ac_ext <<_ACEOF
+/* confdefs.h. */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h. */
+$ac_includes_default
+int
+main ()
+{
+static int test_array [1 - 2 * !(((long) (sizeof (char))) >= 0)];
+test_array [0] = 0
+
+ ;
+ return 0;
+}
+_ACEOF
+rm -f conftest.$ac_objext
+if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
+ (eval $ac_compile) 2>conftest.er1
+ ac_status=$?
+ grep -v '^ *+' conftest.er1 >conftest.err
+ rm -f conftest.er1
+ cat conftest.err >&5
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); } &&
+ { ac_try='test -z "$ac_c_werror_flag"
+ || test ! -s conftest.err'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; } &&
+ { ac_try='test -s conftest.$ac_objext'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; }; then
+ ac_lo=0 ac_mid=0
+ while :; do
+ cat >conftest.$ac_ext <<_ACEOF
+/* confdefs.h. */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h. */
+$ac_includes_default
+int
+main ()
+{
+static int test_array [1 - 2 * !(((long) (sizeof (char))) <= $ac_mid)];
+test_array [0] = 0
+
+ ;
+ return 0;
+}
+_ACEOF
+rm -f conftest.$ac_objext
+if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
+ (eval $ac_compile) 2>conftest.er1
+ ac_status=$?
+ grep -v '^ *+' conftest.er1 >conftest.err
+ rm -f conftest.er1
+ cat conftest.err >&5
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); } &&
+ { ac_try='test -z "$ac_c_werror_flag"
+ || test ! -s conftest.err'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; } &&
+ { ac_try='test -s conftest.$ac_objext'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; }; then
+ ac_hi=$ac_mid; break
+else
+ echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+ac_lo=`expr $ac_mid + 1`
+ if test $ac_lo -le $ac_mid; then
+ ac_lo= ac_hi=
+ break
+ fi
+ ac_mid=`expr 2 '*' $ac_mid + 1`
+fi
+rm -f conftest.err conftest.$ac_objext conftest.$ac_ext
+ done
+else
+ echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+cat >conftest.$ac_ext <<_ACEOF
+/* confdefs.h. */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h. */
+$ac_includes_default
+int
+main ()
+{
+static int test_array [1 - 2 * !(((long) (sizeof (char))) < 0)];
+test_array [0] = 0
+
+ ;
+ return 0;
+}
+_ACEOF
+rm -f conftest.$ac_objext
+if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
+ (eval $ac_compile) 2>conftest.er1
+ ac_status=$?
+ grep -v '^ *+' conftest.er1 >conftest.err
+ rm -f conftest.er1
+ cat conftest.err >&5
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); } &&
+ { ac_try='test -z "$ac_c_werror_flag"
+ || test ! -s conftest.err'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; } &&
+ { ac_try='test -s conftest.$ac_objext'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; }; then
+ ac_hi=-1 ac_mid=-1
+ while :; do
+ cat >conftest.$ac_ext <<_ACEOF
+/* confdefs.h. */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h. */
+$ac_includes_default
+int
+main ()
+{
+static int test_array [1 - 2 * !(((long) (sizeof (char))) >= $ac_mid)];
+test_array [0] = 0
+
+ ;
+ return 0;
+}
+_ACEOF
+rm -f conftest.$ac_objext
+if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
+ (eval $ac_compile) 2>conftest.er1
+ ac_status=$?
+ grep -v '^ *+' conftest.er1 >conftest.err
+ rm -f conftest.er1
+ cat conftest.err >&5
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); } &&
+ { ac_try='test -z "$ac_c_werror_flag"
+ || test ! -s conftest.err'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; } &&
+ { ac_try='test -s conftest.$ac_objext'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; }; then
+ ac_lo=$ac_mid; break
+else
+ echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+ac_hi=`expr '(' $ac_mid ')' - 1`
+ if test $ac_mid -le $ac_hi; then
+ ac_lo= ac_hi=
+ break
+ fi
+ ac_mid=`expr 2 '*' $ac_mid`
+fi
+rm -f conftest.err conftest.$ac_objext conftest.$ac_ext
+ done
+else
+ echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+ac_lo= ac_hi=
+fi
+rm -f conftest.err conftest.$ac_objext conftest.$ac_ext
+fi
+rm -f conftest.err conftest.$ac_objext conftest.$ac_ext
+# Binary search between lo and hi bounds.
+while test "x$ac_lo" != "x$ac_hi"; do
+ ac_mid=`expr '(' $ac_hi - $ac_lo ')' / 2 + $ac_lo`
+ cat >conftest.$ac_ext <<_ACEOF
+/* confdefs.h. */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h. */
+$ac_includes_default
+int
+main ()
+{
+static int test_array [1 - 2 * !(((long) (sizeof (char))) <= $ac_mid)];
+test_array [0] = 0
+
+ ;
+ return 0;
+}
+_ACEOF
+rm -f conftest.$ac_objext
+if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
+ (eval $ac_compile) 2>conftest.er1
+ ac_status=$?
+ grep -v '^ *+' conftest.er1 >conftest.err
+ rm -f conftest.er1
+ cat conftest.err >&5
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); } &&
+ { ac_try='test -z "$ac_c_werror_flag"
+ || test ! -s conftest.err'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; } &&
+ { ac_try='test -s conftest.$ac_objext'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; }; then
+ ac_hi=$ac_mid
+else
+ echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+ac_lo=`expr '(' $ac_mid ')' + 1`
+fi
+rm -f conftest.err conftest.$ac_objext conftest.$ac_ext
+done
+case $ac_lo in
+?*) ac_cv_sizeof_char=$ac_lo;;
+'') { { echo "$as_me:$LINENO: error: cannot compute sizeof (char), 77
+See \`config.log' for more details." >&5
+echo "$as_me: error: cannot compute sizeof (char), 77
+See \`config.log' for more details." >&2;}
+ { (exit 1); exit 1; }; } ;;
+esac
+else
+ if test "$cross_compiling" = yes; then
+ { { echo "$as_me:$LINENO: error: cannot run test program while cross compiling
+See \`config.log' for more details." >&5
+echo "$as_me: error: cannot run test program while cross compiling
+See \`config.log' for more details." >&2;}
+ { (exit 1); exit 1; }; }
+else
+ cat >conftest.$ac_ext <<_ACEOF
+/* confdefs.h. */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h. */
+$ac_includes_default
+long longval () { return (long) (sizeof (char)); }
+unsigned long ulongval () { return (long) (sizeof (char)); }
+#include <stdio.h>
+#include <stdlib.h>
+int
+main ()
+{
+
+ FILE *f = fopen ("conftest.val", "w");
+ if (! f)
+ exit (1);
+ if (((long) (sizeof (char))) < 0)
+ {
+ long i = longval ();
+ if (i != ((long) (sizeof (char))))
+ exit (1);
+ fprintf (f, "%ld\n", i);
+ }
+ else
+ {
+ unsigned long i = ulongval ();
+ if (i != ((long) (sizeof (char))))
+ exit (1);
+ fprintf (f, "%lu\n", i);
+ }
+ exit (ferror (f) || fclose (f) != 0);
+
+ ;
+ return 0;
+}
+_ACEOF
+rm -f conftest$ac_exeext
+if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
+ (eval $ac_link) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); } && { ac_try='./conftest$ac_exeext'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; }; then
+ ac_cv_sizeof_char=`cat conftest.val`
+else
+ echo "$as_me: program exited with status $ac_status" >&5
+echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+( exit $ac_status )
+{ { echo "$as_me:$LINENO: error: cannot compute sizeof (char), 77
+See \`config.log' for more details." >&5
+echo "$as_me: error: cannot compute sizeof (char), 77
+See \`config.log' for more details." >&2;}
+ { (exit 1); exit 1; }; }
+fi
+rm -f core *.core gmon.out bb.out conftest$ac_exeext conftest.$ac_objext conftest.$ac_ext
+fi
+fi
+rm -f conftest.val
+else
+ ac_cv_sizeof_char=0
+fi
+fi
+echo "$as_me:$LINENO: result: $ac_cv_sizeof_char" >&5
+echo "${ECHO_T}$ac_cv_sizeof_char" >&6
+cat >>confdefs.h <<_ACEOF
+#define SIZEOF_CHAR $ac_cv_sizeof_char
+_ACEOF
+
+
+
+ echo "$as_me:$LINENO: checking for type equivalent to int8_t" >&5
+echo $ECHO_N "checking for type equivalent to int8_t... $ECHO_C" >&6
+ case "$ac_cv_sizeof_char" in
+ 1) acx_cv_type_int8_t=char ;;
+ *) { { echo "$as_me:$LINENO: error: no 8-bit type" >&5
+echo "$as_me: error: no 8-bit type" >&2;}
+ { (exit please report a bug); exit please report a bug; }; }
+ esac
+ echo "$as_me:$LINENO: result: $acx_cv_type_int8_t" >&5
+echo "${ECHO_T}$acx_cv_type_int8_t" >&6
+
+ echo "$as_me:$LINENO: checking for type equivalent to int16_t" >&5
+echo $ECHO_N "checking for type equivalent to int16_t... $ECHO_C" >&6
+ case "$ac_cv_sizeof_int:$ac_cv_sizeof_short" in
+ 2:*) acx_cv_type_int16_t=int ;;
+ *:2) acx_cv_type_int16_t=short ;;
+ *) { { echo "$as_me:$LINENO: error: no 16-bit type" >&5
+echo "$as_me: error: no 16-bit type" >&2;}
+ { (exit please report a bug); exit please report a bug; }; }
+ esac
+ echo "$as_me:$LINENO: result: $acx_cv_type_int16_t" >&5
+echo "${ECHO_T}$acx_cv_type_int16_t" >&6
+
+ echo "$as_me:$LINENO: checking for type equivalent to int32_t" >&5
+echo $ECHO_N "checking for type equivalent to int32_t... $ECHO_C" >&6
+ case "$ac_cv_sizeof_int:$ac_cv_sizeof_long" in
+ 4:*) acx_cv_type_int32_t=int ;;
+ *:4) acx_cv_type_int32_t=long ;;
+ *) { { echo "$as_me:$LINENO: error: no 32-bit type" >&5
+echo "$as_me: error: no 32-bit type" >&2;}
+ { (exit please report a bug); exit please report a bug; }; }
+ esac
+ echo "$as_me:$LINENO: result: $acx_cv_type_int32_t" >&5
+echo "${ECHO_T}$acx_cv_type_int32_t" >&6
+fi
+
+# These tests are here to make the output prettier
+
+if test "$ac_cv_type_uint64_t" != yes && test "$ac_cv_type_u_int64_t" != yes; then
+ case "$ac_cv_sizeof_long" in
+ 8) acx_cv_type_int64_t=long ;;
+ esac
+ echo "$as_me:$LINENO: checking for type equivalent to int64_t" >&5
+echo $ECHO_N "checking for type equivalent to int64_t... $ECHO_C" >&6
+ echo "$as_me:$LINENO: result: ${acx_cv_type_int64_t-'using preprocessor symbols'}" >&5
+echo "${ECHO_T}${acx_cv_type_int64_t-'using preprocessor symbols'}" >&6
+fi
+
+# Now we can use the above types
+
+if test "$ac_cv_type_uintptr_t" != yes; then
+ echo "$as_me:$LINENO: checking for type equivalent to intptr_t" >&5
+echo $ECHO_N "checking for type equivalent to intptr_t... $ECHO_C" >&6
+ case $ac_cv_sizeof_void_p in
+ 2) acx_cv_type_intptr_t=int16_t ;;
+ 4) acx_cv_type_intptr_t=int32_t ;;
+ 8) acx_cv_type_intptr_t=int64_t ;;
+ *) { { echo "$as_me:$LINENO: error: no equivalent for intptr_t" >&5
+echo "$as_me: error: no equivalent for intptr_t" >&2;}
+ { (exit please report a bug); exit please report a bug; }; }
+ esac
+ echo "$as_me:$LINENO: result: $acx_cv_type_intptr_t" >&5
+echo "${ECHO_T}$acx_cv_type_intptr_t" >&6
+fi
+
+# ----------------- done all checks, emit header -------------
+ ac_config_commands="$ac_config_commands gstdint.h"
+
+
+
+
+# Checks for typedefs, structures, and compiler characteristics.
+echo "$as_me:$LINENO: checking for an ANSI C-conforming const" >&5
+echo $ECHO_N "checking for an ANSI C-conforming const... $ECHO_C" >&6
+if test "${ac_cv_c_const+set}" = set; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+ cat >conftest.$ac_ext <<_ACEOF
+/* confdefs.h. */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h. */
+
+int
+main ()
+{
+/* FIXME: Include the comments suggested by Paul. */
+#ifndef __cplusplus
+ /* Ultrix mips cc rejects this. */
+ typedef int charset[2];
+ const charset x;
+ /* SunOS 4.1.1 cc rejects this. */
+ char const *const *ccp;
+ char **p;
+ /* NEC SVR4.0.2 mips cc rejects this. */
+ struct point {int x, y;};
+ static struct point const zero = {0,0};
+ /* AIX XL C 1.02.0.0 rejects this.
+ It does not let you subtract one const X* pointer from another in
+ an arm of an if-expression whose if-part is not a constant
+ expression */
+ const char *g = "string";
+ ccp = &g + (g ? g-g : 0);
+ /* HPUX 7.0 cc rejects these. */
+ ++ccp;
+ p = (char**) ccp;
+ ccp = (char const *const *) p;
+ { /* SCO 3.2v4 cc rejects this. */
+ char *t;
+ char const *s = 0 ? (char *) 0 : (char const *) 0;
+
+ *t++ = 0;
+ }
+ { /* Someone thinks the Sun supposedly-ANSI compiler will reject this. */
+ int x[] = {25, 17};
+ const int *foo = &x[0];
+ ++foo;
+ }
+ { /* Sun SC1.0 ANSI compiler rejects this -- but not the above. */
+ typedef const int *iptr;
+ iptr p = 0;
+ ++p;
+ }
+ { /* AIX XL C 1.02.0.0 rejects this saying
+ "k.c", line 2.27: 1506-025 (S) Operand must be a modifiable lvalue. */
+ struct s { int j; const int *ap[3]; };
+ struct s *b; b->j = 5;
+ }
+ { /* ULTRIX-32 V3.1 (Rev 9) vcc rejects this */
+ const int foo = 10;
+ }
+#endif
+
+ ;
+ return 0;
+}
+_ACEOF
+rm -f conftest.$ac_objext
+if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
+ (eval $ac_compile) 2>conftest.er1
+ ac_status=$?
+ grep -v '^ *+' conftest.er1 >conftest.err
+ rm -f conftest.er1
+ cat conftest.err >&5
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); } &&
+ { ac_try='test -z "$ac_c_werror_flag"
+ || test ! -s conftest.err'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; } &&
+ { ac_try='test -s conftest.$ac_objext'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; }; then
+ ac_cv_c_const=yes
+else
+ echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+ac_cv_c_const=no
+fi
+rm -f conftest.err conftest.$ac_objext conftest.$ac_ext
+fi
+echo "$as_me:$LINENO: result: $ac_cv_c_const" >&5
+echo "${ECHO_T}$ac_cv_c_const" >&6
+if test $ac_cv_c_const = no; then
+
+cat >>confdefs.h <<\_ACEOF
+#define const
+_ACEOF
+
+fi
+
+echo "$as_me:$LINENO: checking for off_t" >&5
+echo $ECHO_N "checking for off_t... $ECHO_C" >&6
+if test "${ac_cv_type_off_t+set}" = set; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+ cat >conftest.$ac_ext <<_ACEOF
+/* confdefs.h. */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h. */
+$ac_includes_default
+int
+main ()
+{
+if ((off_t *) 0)
+ return 0;
+if (sizeof (off_t))
+ return 0;
+ ;
+ return 0;
+}
+_ACEOF
+rm -f conftest.$ac_objext
+if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
+ (eval $ac_compile) 2>conftest.er1
+ ac_status=$?
+ grep -v '^ *+' conftest.er1 >conftest.err
+ rm -f conftest.er1
+ cat conftest.err >&5
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); } &&
+ { ac_try='test -z "$ac_c_werror_flag"
+ || test ! -s conftest.err'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; } &&
+ { ac_try='test -s conftest.$ac_objext'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; }; then
+ ac_cv_type_off_t=yes
+else
+ echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+ac_cv_type_off_t=no
+fi
+rm -f conftest.err conftest.$ac_objext conftest.$ac_ext
+fi
+echo "$as_me:$LINENO: result: $ac_cv_type_off_t" >&5
+echo "${ECHO_T}$ac_cv_type_off_t" >&6
+if test $ac_cv_type_off_t = yes; then
+ :
+else
+
+cat >>confdefs.h <<_ACEOF
+#define off_t long
+_ACEOF
+
+fi
+
+echo "$as_me:$LINENO: checking for int" >&5
+echo $ECHO_N "checking for int... $ECHO_C" >&6
+if test "${ac_cv_type_int+set}" = set; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+ cat >conftest.$ac_ext <<_ACEOF
+/* confdefs.h. */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h. */
+$ac_includes_default
+int
+main ()
+{
+if ((int *) 0)
+ return 0;
+if (sizeof (int))
+ return 0;
+ ;
+ return 0;
+}
+_ACEOF
+rm -f conftest.$ac_objext
+if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
+ (eval $ac_compile) 2>conftest.er1
+ ac_status=$?
+ grep -v '^ *+' conftest.er1 >conftest.err
+ rm -f conftest.er1
+ cat conftest.err >&5
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); } &&
+ { ac_try='test -z "$ac_c_werror_flag"
+ || test ! -s conftest.err'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; } &&
+ { ac_try='test -s conftest.$ac_objext'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; }; then
+ ac_cv_type_int=yes
+else
+ echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+ac_cv_type_int=no
+fi
+rm -f conftest.err conftest.$ac_objext conftest.$ac_ext
+fi
+echo "$as_me:$LINENO: result: $ac_cv_type_int" >&5
+echo "${ECHO_T}$ac_cv_type_int" >&6
+
+echo "$as_me:$LINENO: checking size of int" >&5
+echo $ECHO_N "checking size of int... $ECHO_C" >&6
+if test "${ac_cv_sizeof_int+set}" = set; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+ if test "$ac_cv_type_int" = yes; then
+ # The cast to unsigned long works around a bug in the HP C Compiler
+ # version HP92453-01 B.11.11.23709.GP, which incorrectly rejects
+ # declarations like `int a3[[(sizeof (unsigned char)) >= 0]];'.
+ # This bug is HP SR number 8606223364.
+ if test "$cross_compiling" = yes; then
+ # Depending upon the size, compute the lo and hi bounds.
+cat >conftest.$ac_ext <<_ACEOF
+/* confdefs.h. */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h. */
+$ac_includes_default
+int
+main ()
+{
+static int test_array [1 - 2 * !(((long) (sizeof (int))) >= 0)];
+test_array [0] = 0
+
+ ;
+ return 0;
+}
+_ACEOF
+rm -f conftest.$ac_objext
+if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
+ (eval $ac_compile) 2>conftest.er1
+ ac_status=$?
+ grep -v '^ *+' conftest.er1 >conftest.err
+ rm -f conftest.er1
+ cat conftest.err >&5
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); } &&
+ { ac_try='test -z "$ac_c_werror_flag"
+ || test ! -s conftest.err'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; } &&
+ { ac_try='test -s conftest.$ac_objext'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; }; then
+ ac_lo=0 ac_mid=0
+ while :; do
+ cat >conftest.$ac_ext <<_ACEOF
+/* confdefs.h. */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h. */
+$ac_includes_default
+int
+main ()
+{
+static int test_array [1 - 2 * !(((long) (sizeof (int))) <= $ac_mid)];
+test_array [0] = 0
+
+ ;
+ return 0;
+}
+_ACEOF
+rm -f conftest.$ac_objext
+if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
+ (eval $ac_compile) 2>conftest.er1
+ ac_status=$?
+ grep -v '^ *+' conftest.er1 >conftest.err
+ rm -f conftest.er1
+ cat conftest.err >&5
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); } &&
+ { ac_try='test -z "$ac_c_werror_flag"
+ || test ! -s conftest.err'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; } &&
+ { ac_try='test -s conftest.$ac_objext'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; }; then
+ ac_hi=$ac_mid; break
+else
+ echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+ac_lo=`expr $ac_mid + 1`
+ if test $ac_lo -le $ac_mid; then
+ ac_lo= ac_hi=
+ break
+ fi
+ ac_mid=`expr 2 '*' $ac_mid + 1`
+fi
+rm -f conftest.err conftest.$ac_objext conftest.$ac_ext
+ done
+else
+ echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+cat >conftest.$ac_ext <<_ACEOF
+/* confdefs.h. */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h. */
+$ac_includes_default
+int
+main ()
+{
+static int test_array [1 - 2 * !(((long) (sizeof (int))) < 0)];
+test_array [0] = 0
+
+ ;
+ return 0;
+}
+_ACEOF
+rm -f conftest.$ac_objext
+if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
+ (eval $ac_compile) 2>conftest.er1
+ ac_status=$?
+ grep -v '^ *+' conftest.er1 >conftest.err
+ rm -f conftest.er1
+ cat conftest.err >&5
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); } &&
+ { ac_try='test -z "$ac_c_werror_flag"
+ || test ! -s conftest.err'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; } &&
+ { ac_try='test -s conftest.$ac_objext'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; }; then
+ ac_hi=-1 ac_mid=-1
+ while :; do
+ cat >conftest.$ac_ext <<_ACEOF
+/* confdefs.h. */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h. */
+$ac_includes_default
+int
+main ()
+{
+static int test_array [1 - 2 * !(((long) (sizeof (int))) >= $ac_mid)];
+test_array [0] = 0
+
+ ;
+ return 0;
+}
+_ACEOF
+rm -f conftest.$ac_objext
+if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
+ (eval $ac_compile) 2>conftest.er1
+ ac_status=$?
+ grep -v '^ *+' conftest.er1 >conftest.err
+ rm -f conftest.er1
+ cat conftest.err >&5
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); } &&
+ { ac_try='test -z "$ac_c_werror_flag"
+ || test ! -s conftest.err'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; } &&
+ { ac_try='test -s conftest.$ac_objext'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; }; then
+ ac_lo=$ac_mid; break
+else
+ echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+ac_hi=`expr '(' $ac_mid ')' - 1`
+ if test $ac_mid -le $ac_hi; then
+ ac_lo= ac_hi=
+ break
+ fi
+ ac_mid=`expr 2 '*' $ac_mid`
+fi
+rm -f conftest.err conftest.$ac_objext conftest.$ac_ext
+ done
+else
+ echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+ac_lo= ac_hi=
+fi
+rm -f conftest.err conftest.$ac_objext conftest.$ac_ext
+fi
+rm -f conftest.err conftest.$ac_objext conftest.$ac_ext
+# Binary search between lo and hi bounds.
+while test "x$ac_lo" != "x$ac_hi"; do
+ ac_mid=`expr '(' $ac_hi - $ac_lo ')' / 2 + $ac_lo`
+ cat >conftest.$ac_ext <<_ACEOF
+/* confdefs.h. */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h. */
+$ac_includes_default
+int
+main ()
+{
+static int test_array [1 - 2 * !(((long) (sizeof (int))) <= $ac_mid)];
+test_array [0] = 0
+
+ ;
+ return 0;
+}
+_ACEOF
+rm -f conftest.$ac_objext
+if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
+ (eval $ac_compile) 2>conftest.er1
+ ac_status=$?
+ grep -v '^ *+' conftest.er1 >conftest.err
+ rm -f conftest.er1
+ cat conftest.err >&5
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); } &&
+ { ac_try='test -z "$ac_c_werror_flag"
+ || test ! -s conftest.err'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; } &&
+ { ac_try='test -s conftest.$ac_objext'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; }; then
+ ac_hi=$ac_mid
+else
+ echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+ac_lo=`expr '(' $ac_mid ')' + 1`
+fi
+rm -f conftest.err conftest.$ac_objext conftest.$ac_ext
+done
+case $ac_lo in
+?*) ac_cv_sizeof_int=$ac_lo;;
+'') { { echo "$as_me:$LINENO: error: cannot compute sizeof (int), 77
+See \`config.log' for more details." >&5
+echo "$as_me: error: cannot compute sizeof (int), 77
+See \`config.log' for more details." >&2;}
+ { (exit 1); exit 1; }; } ;;
+esac
+else
+ if test "$cross_compiling" = yes; then
+ { { echo "$as_me:$LINENO: error: cannot run test program while cross compiling
+See \`config.log' for more details." >&5
+echo "$as_me: error: cannot run test program while cross compiling
+See \`config.log' for more details." >&2;}
+ { (exit 1); exit 1; }; }
+else
+ cat >conftest.$ac_ext <<_ACEOF
+/* confdefs.h. */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h. */
+$ac_includes_default
+long longval () { return (long) (sizeof (int)); }
+unsigned long ulongval () { return (long) (sizeof (int)); }
+#include <stdio.h>
+#include <stdlib.h>
+int
+main ()
+{
+
+ FILE *f = fopen ("conftest.val", "w");
+ if (! f)
+ exit (1);
+ if (((long) (sizeof (int))) < 0)
+ {
+ long i = longval ();
+ if (i != ((long) (sizeof (int))))
+ exit (1);
+ fprintf (f, "%ld\n", i);
+ }
+ else
+ {
+ unsigned long i = ulongval ();
+ if (i != ((long) (sizeof (int))))
+ exit (1);
+ fprintf (f, "%lu\n", i);
+ }
+ exit (ferror (f) || fclose (f) != 0);
+
+ ;
+ return 0;
+}
+_ACEOF
+rm -f conftest$ac_exeext
+if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
+ (eval $ac_link) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); } && { ac_try='./conftest$ac_exeext'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; }; then
+ ac_cv_sizeof_int=`cat conftest.val`
+else
+ echo "$as_me: program exited with status $ac_status" >&5
+echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+( exit $ac_status )
+{ { echo "$as_me:$LINENO: error: cannot compute sizeof (int), 77
+See \`config.log' for more details." >&5
+echo "$as_me: error: cannot compute sizeof (int), 77
+See \`config.log' for more details." >&2;}
+ { (exit 1); exit 1; }; }
+fi
+rm -f core *.core gmon.out bb.out conftest$ac_exeext conftest.$ac_objext conftest.$ac_ext
+fi
+fi
+rm -f conftest.val
+else
+ ac_cv_sizeof_int=0
+fi
+fi
+echo "$as_me:$LINENO: result: $ac_cv_sizeof_int" >&5
+echo "${ECHO_T}$ac_cv_sizeof_int" >&6
+cat >>confdefs.h <<_ACEOF
+#define SIZEOF_INT $ac_cv_sizeof_int
+_ACEOF
+
+
+echo "$as_me:$LINENO: checking for long" >&5
+echo $ECHO_N "checking for long... $ECHO_C" >&6
+if test "${ac_cv_type_long+set}" = set; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+ cat >conftest.$ac_ext <<_ACEOF
+/* confdefs.h. */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h. */
+$ac_includes_default
+int
+main ()
+{
+if ((long *) 0)
+ return 0;
+if (sizeof (long))
+ return 0;
+ ;
+ return 0;
+}
+_ACEOF
+rm -f conftest.$ac_objext
+if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
+ (eval $ac_compile) 2>conftest.er1
+ ac_status=$?
+ grep -v '^ *+' conftest.er1 >conftest.err
+ rm -f conftest.er1
+ cat conftest.err >&5
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); } &&
+ { ac_try='test -z "$ac_c_werror_flag"
+ || test ! -s conftest.err'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; } &&
+ { ac_try='test -s conftest.$ac_objext'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; }; then
+ ac_cv_type_long=yes
+else
+ echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+ac_cv_type_long=no
+fi
+rm -f conftest.err conftest.$ac_objext conftest.$ac_ext
+fi
+echo "$as_me:$LINENO: result: $ac_cv_type_long" >&5
+echo "${ECHO_T}$ac_cv_type_long" >&6
+
+echo "$as_me:$LINENO: checking size of long" >&5
+echo $ECHO_N "checking size of long... $ECHO_C" >&6
+if test "${ac_cv_sizeof_long+set}" = set; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+ if test "$ac_cv_type_long" = yes; then
+ # The cast to unsigned long works around a bug in the HP C Compiler
+ # version HP92453-01 B.11.11.23709.GP, which incorrectly rejects
+ # declarations like `int a3[[(sizeof (unsigned char)) >= 0]];'.
+ # This bug is HP SR number 8606223364.
+ if test "$cross_compiling" = yes; then
+ # Depending upon the size, compute the lo and hi bounds.
+cat >conftest.$ac_ext <<_ACEOF
+/* confdefs.h. */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h. */
+$ac_includes_default
+int
+main ()
+{
+static int test_array [1 - 2 * !(((long) (sizeof (long))) >= 0)];
+test_array [0] = 0
+
+ ;
+ return 0;
+}
+_ACEOF
+rm -f conftest.$ac_objext
+if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
+ (eval $ac_compile) 2>conftest.er1
+ ac_status=$?
+ grep -v '^ *+' conftest.er1 >conftest.err
+ rm -f conftest.er1
+ cat conftest.err >&5
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); } &&
+ { ac_try='test -z "$ac_c_werror_flag"
+ || test ! -s conftest.err'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; } &&
+ { ac_try='test -s conftest.$ac_objext'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; }; then
+ ac_lo=0 ac_mid=0
+ while :; do
+ cat >conftest.$ac_ext <<_ACEOF
+/* confdefs.h. */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h. */
+$ac_includes_default
+int
+main ()
+{
+static int test_array [1 - 2 * !(((long) (sizeof (long))) <= $ac_mid)];
+test_array [0] = 0
+
+ ;
+ return 0;
+}
+_ACEOF
+rm -f conftest.$ac_objext
+if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
+ (eval $ac_compile) 2>conftest.er1
+ ac_status=$?
+ grep -v '^ *+' conftest.er1 >conftest.err
+ rm -f conftest.er1
+ cat conftest.err >&5
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); } &&
+ { ac_try='test -z "$ac_c_werror_flag"
+ || test ! -s conftest.err'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; } &&
+ { ac_try='test -s conftest.$ac_objext'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; }; then
+ ac_hi=$ac_mid; break
+else
+ echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+ac_lo=`expr $ac_mid + 1`
+ if test $ac_lo -le $ac_mid; then
+ ac_lo= ac_hi=
+ break
+ fi
+ ac_mid=`expr 2 '*' $ac_mid + 1`
+fi
+rm -f conftest.err conftest.$ac_objext conftest.$ac_ext
+ done
+else
+ echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+cat >conftest.$ac_ext <<_ACEOF
+/* confdefs.h. */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h. */
+$ac_includes_default
+int
+main ()
+{
+static int test_array [1 - 2 * !(((long) (sizeof (long))) < 0)];
+test_array [0] = 0
+
+ ;
+ return 0;
+}
+_ACEOF
+rm -f conftest.$ac_objext
+if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
+ (eval $ac_compile) 2>conftest.er1
+ ac_status=$?
+ grep -v '^ *+' conftest.er1 >conftest.err
+ rm -f conftest.er1
+ cat conftest.err >&5
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); } &&
+ { ac_try='test -z "$ac_c_werror_flag"
+ || test ! -s conftest.err'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; } &&
+ { ac_try='test -s conftest.$ac_objext'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; }; then
+ ac_hi=-1 ac_mid=-1
+ while :; do
+ cat >conftest.$ac_ext <<_ACEOF
+/* confdefs.h. */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h. */
+$ac_includes_default
+int
+main ()
+{
+static int test_array [1 - 2 * !(((long) (sizeof (long))) >= $ac_mid)];
+test_array [0] = 0
+
+ ;
+ return 0;
+}
+_ACEOF
+rm -f conftest.$ac_objext
+if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
+ (eval $ac_compile) 2>conftest.er1
+ ac_status=$?
+ grep -v '^ *+' conftest.er1 >conftest.err
+ rm -f conftest.er1
+ cat conftest.err >&5
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); } &&
+ { ac_try='test -z "$ac_c_werror_flag"
+ || test ! -s conftest.err'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; } &&
+ { ac_try='test -s conftest.$ac_objext'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; }; then
+ ac_lo=$ac_mid; break
+else
+ echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+ac_hi=`expr '(' $ac_mid ')' - 1`
+ if test $ac_mid -le $ac_hi; then
+ ac_lo= ac_hi=
+ break
+ fi
+ ac_mid=`expr 2 '*' $ac_mid`
+fi
+rm -f conftest.err conftest.$ac_objext conftest.$ac_ext
+ done
+else
+ echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+ac_lo= ac_hi=
+fi
+rm -f conftest.err conftest.$ac_objext conftest.$ac_ext
+fi
+rm -f conftest.err conftest.$ac_objext conftest.$ac_ext
+# Binary search between lo and hi bounds.
+while test "x$ac_lo" != "x$ac_hi"; do
+ ac_mid=`expr '(' $ac_hi - $ac_lo ')' / 2 + $ac_lo`
+ cat >conftest.$ac_ext <<_ACEOF
+/* confdefs.h. */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h. */
+$ac_includes_default
+int
+main ()
+{
+static int test_array [1 - 2 * !(((long) (sizeof (long))) <= $ac_mid)];
+test_array [0] = 0
+
+ ;
+ return 0;
+}
+_ACEOF
+rm -f conftest.$ac_objext
+if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
+ (eval $ac_compile) 2>conftest.er1
+ ac_status=$?
+ grep -v '^ *+' conftest.er1 >conftest.err
+ rm -f conftest.er1
+ cat conftest.err >&5
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); } &&
+ { ac_try='test -z "$ac_c_werror_flag"
+ || test ! -s conftest.err'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; } &&
+ { ac_try='test -s conftest.$ac_objext'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; }; then
+ ac_hi=$ac_mid
+else
+ echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+ac_lo=`expr '(' $ac_mid ')' + 1`
+fi
+rm -f conftest.err conftest.$ac_objext conftest.$ac_ext
+done
+case $ac_lo in
+?*) ac_cv_sizeof_long=$ac_lo;;
+'') { { echo "$as_me:$LINENO: error: cannot compute sizeof (long), 77
+See \`config.log' for more details." >&5
+echo "$as_me: error: cannot compute sizeof (long), 77
+See \`config.log' for more details." >&2;}
+ { (exit 1); exit 1; }; } ;;
+esac
+else
+ if test "$cross_compiling" = yes; then
+ { { echo "$as_me:$LINENO: error: cannot run test program while cross compiling
+See \`config.log' for more details." >&5
+echo "$as_me: error: cannot run test program while cross compiling
+See \`config.log' for more details." >&2;}
+ { (exit 1); exit 1; }; }
+else
+ cat >conftest.$ac_ext <<_ACEOF
+/* confdefs.h. */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h. */
+$ac_includes_default
+long longval () { return (long) (sizeof (long)); }
+unsigned long ulongval () { return (long) (sizeof (long)); }
+#include <stdio.h>
+#include <stdlib.h>
+int
+main ()
+{
+
+ FILE *f = fopen ("conftest.val", "w");
+ if (! f)
+ exit (1);
+ if (((long) (sizeof (long))) < 0)
+ {
+ long i = longval ();
+ if (i != ((long) (sizeof (long))))
+ exit (1);
+ fprintf (f, "%ld\n", i);
+ }
+ else
+ {
+ unsigned long i = ulongval ();
+ if (i != ((long) (sizeof (long))))
+ exit (1);
+ fprintf (f, "%lu\n", i);
+ }
+ exit (ferror (f) || fclose (f) != 0);
+
+ ;
+ return 0;
+}
+_ACEOF
+rm -f conftest$ac_exeext
+if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
+ (eval $ac_link) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); } && { ac_try='./conftest$ac_exeext'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; }; then
+ ac_cv_sizeof_long=`cat conftest.val`
+else
+ echo "$as_me: program exited with status $ac_status" >&5
+echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+( exit $ac_status )
+{ { echo "$as_me:$LINENO: error: cannot compute sizeof (long), 77
+See \`config.log' for more details." >&5
+echo "$as_me: error: cannot compute sizeof (long), 77
+See \`config.log' for more details." >&2;}
+ { (exit 1); exit 1; }; }
+fi
+rm -f core *.core gmon.out bb.out conftest$ac_exeext conftest.$ac_objext conftest.$ac_ext
+fi
+fi
+rm -f conftest.val
+else
+ ac_cv_sizeof_long=0
+fi
+fi
+echo "$as_me:$LINENO: result: $ac_cv_sizeof_long" >&5
+echo "${ECHO_T}$ac_cv_sizeof_long" >&6
+cat >>confdefs.h <<_ACEOF
+#define SIZEOF_LONG $ac_cv_sizeof_long
+_ACEOF
+
+
+
+# Checks for library functions.
+echo "$as_me:$LINENO: checking for ANSI C header files" >&5
+echo $ECHO_N "checking for ANSI C header files... $ECHO_C" >&6
+if test "${ac_cv_header_stdc+set}" = set; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+ cat >conftest.$ac_ext <<_ACEOF
+/* confdefs.h. */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h. */
+#include <stdlib.h>
+#include <stdarg.h>
+#include <string.h>
+#include <float.h>
+
+int
+main ()
+{
+
+ ;
+ return 0;
+}
+_ACEOF
+rm -f conftest.$ac_objext
+if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
+ (eval $ac_compile) 2>conftest.er1
+ ac_status=$?
+ grep -v '^ *+' conftest.er1 >conftest.err
+ rm -f conftest.er1
+ cat conftest.err >&5
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); } &&
+ { ac_try='test -z "$ac_c_werror_flag"
+ || test ! -s conftest.err'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; } &&
+ { ac_try='test -s conftest.$ac_objext'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; }; then
+ ac_cv_header_stdc=yes
+else
+ echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+ac_cv_header_stdc=no
+fi
+rm -f conftest.err conftest.$ac_objext conftest.$ac_ext
+
+if test $ac_cv_header_stdc = yes; then
+ # SunOS 4.x string.h does not declare mem*, contrary to ANSI.
+ cat >conftest.$ac_ext <<_ACEOF
+/* confdefs.h. */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h. */
+#include <string.h>
+
+_ACEOF
+if (eval "$ac_cpp conftest.$ac_ext") 2>&5 |
+ $EGREP "memchr" >/dev/null 2>&1; then
+ :
+else
+ ac_cv_header_stdc=no
+fi
+rm -f conftest*
+
+fi
+
+if test $ac_cv_header_stdc = yes; then
+ # ISC 2.0.2 stdlib.h does not declare free, contrary to ANSI.
+ cat >conftest.$ac_ext <<_ACEOF
+/* confdefs.h. */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h. */
+#include <stdlib.h>
+
+_ACEOF
+if (eval "$ac_cpp conftest.$ac_ext") 2>&5 |
+ $EGREP "free" >/dev/null 2>&1; then
+ :
+else
+ ac_cv_header_stdc=no
+fi
+rm -f conftest*
+
+fi
+
+if test $ac_cv_header_stdc = yes; then
+ # /bin/cc in Irix-4.0.5 gets non-ANSI ctype macros unless using -ansi.
+ if test "$cross_compiling" = yes; then
+ :
+else
+ cat >conftest.$ac_ext <<_ACEOF
+/* confdefs.h. */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h. */
+#include <ctype.h>
+#if ((' ' & 0x0FF) == 0x020)
+# define ISLOWER(c) ('a' <= (c) && (c) <= 'z')
+# define TOUPPER(c) (ISLOWER(c) ? 'A' + ((c) - 'a') : (c))
+#else
+# define ISLOWER(c) \
+ (('a' <= (c) && (c) <= 'i') \
+ || ('j' <= (c) && (c) <= 'r') \
+ || ('s' <= (c) && (c) <= 'z'))
+# define TOUPPER(c) (ISLOWER(c) ? ((c) | 0x40) : (c))
+#endif
+
+#define XOR(e, f) (((e) && !(f)) || (!(e) && (f)))
+int
+main ()
+{
+ int i;
+ for (i = 0; i < 256; i++)
+ if (XOR (islower (i), ISLOWER (i))
+ || toupper (i) != TOUPPER (i))
+ exit(2);
+ exit (0);
+}
+_ACEOF
+rm -f conftest$ac_exeext
+if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
+ (eval $ac_link) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); } && { ac_try='./conftest$ac_exeext'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; }; then
+ :
+else
+ echo "$as_me: program exited with status $ac_status" >&5
+echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+( exit $ac_status )
+ac_cv_header_stdc=no
+fi
+rm -f core *.core gmon.out bb.out conftest$ac_exeext conftest.$ac_objext conftest.$ac_ext
+fi
+fi
+fi
+echo "$as_me:$LINENO: result: $ac_cv_header_stdc" >&5
+echo "${ECHO_T}$ac_cv_header_stdc" >&6
+if test $ac_cv_header_stdc = yes; then
+
+cat >>confdefs.h <<\_ACEOF
+#define STDC_HEADERS 1
+_ACEOF
+
+fi
+
+
+# Check whether --enable-maintainer-mode or --disable-maintainer-mode was given.
+if test "${enable_maintainer_mode+set}" = set; then
+ enableval="$enable_maintainer_mode"
+
+else
+ enable_maintainer_mode=no
+fi;
+
+if test "x$enable_maintainer_mode" = xno; then
+ MAINT='#'
+else
+ MAINT=
+fi
+
+
+ac_aux_dir=
+for ac_dir in $srcdir $srcdir/.. $srcdir/../..; do
+ if test -f $ac_dir/install-sh; then
+ ac_aux_dir=$ac_dir
+ ac_install_sh="$ac_aux_dir/install-sh -c"
+ break
+ elif test -f $ac_dir/install.sh; then
+ ac_aux_dir=$ac_dir
+ ac_install_sh="$ac_aux_dir/install.sh -c"
+ break
+ elif test -f $ac_dir/shtool; then
+ ac_aux_dir=$ac_dir
+ ac_install_sh="$ac_aux_dir/shtool install -c"
+ break
+ fi
+done
+if test -z "$ac_aux_dir"; then
+ { { echo "$as_me:$LINENO: error: cannot find install-sh or install.sh in $srcdir $srcdir/.. $srcdir/../.." >&5
+echo "$as_me: error: cannot find install-sh or install.sh in $srcdir $srcdir/.. $srcdir/../.." >&2;}
+ { (exit 1); exit 1; }; }
+fi
+ac_config_guess="$SHELL $ac_aux_dir/config.guess"
+ac_config_sub="$SHELL $ac_aux_dir/config.sub"
+ac_configure="$SHELL $ac_aux_dir/configure" # This should be Cygnus configure.
+
+# Make sure we can run config.sub.
+$ac_config_sub sun4 >/dev/null 2>&1 ||
+ { { echo "$as_me:$LINENO: error: cannot run $ac_config_sub" >&5
+echo "$as_me: error: cannot run $ac_config_sub" >&2;}
+ { (exit 1); exit 1; }; }
+
+echo "$as_me:$LINENO: checking build system type" >&5
+echo $ECHO_N "checking build system type... $ECHO_C" >&6
+if test "${ac_cv_build+set}" = set; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+ ac_cv_build_alias=$build_alias
+test -z "$ac_cv_build_alias" &&
+ ac_cv_build_alias=`$ac_config_guess`
+test -z "$ac_cv_build_alias" &&
+ { { echo "$as_me:$LINENO: error: cannot guess build type; you must specify one" >&5
+echo "$as_me: error: cannot guess build type; you must specify one" >&2;}
+ { (exit 1); exit 1; }; }
+ac_cv_build=`$ac_config_sub $ac_cv_build_alias` ||
+ { { echo "$as_me:$LINENO: error: $ac_config_sub $ac_cv_build_alias failed" >&5
+echo "$as_me: error: $ac_config_sub $ac_cv_build_alias failed" >&2;}
+ { (exit 1); exit 1; }; }
+
+fi
+echo "$as_me:$LINENO: result: $ac_cv_build" >&5
+echo "${ECHO_T}$ac_cv_build" >&6
+build=$ac_cv_build
+build_cpu=`echo $ac_cv_build | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\1/'`
+build_vendor=`echo $ac_cv_build | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\2/'`
+build_os=`echo $ac_cv_build | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'`
+
+
+echo "$as_me:$LINENO: checking host system type" >&5
+echo $ECHO_N "checking host system type... $ECHO_C" >&6
+if test "${ac_cv_host+set}" = set; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+ ac_cv_host_alias=$host_alias
+test -z "$ac_cv_host_alias" &&
+ ac_cv_host_alias=$ac_cv_build_alias
+ac_cv_host=`$ac_config_sub $ac_cv_host_alias` ||
+ { { echo "$as_me:$LINENO: error: $ac_config_sub $ac_cv_host_alias failed" >&5
+echo "$as_me: error: $ac_config_sub $ac_cv_host_alias failed" >&2;}
+ { (exit 1); exit 1; }; }
+
+fi
+echo "$as_me:$LINENO: result: $ac_cv_host" >&5
+echo "${ECHO_T}$ac_cv_host" >&6
+host=$ac_cv_host
+host_cpu=`echo $ac_cv_host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\1/'`
+host_vendor=`echo $ac_cv_host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\2/'`
+host_os=`echo $ac_cv_host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'`
+
+
+echo "$as_me:$LINENO: checking target system type" >&5
+echo $ECHO_N "checking target system type... $ECHO_C" >&6
+if test "${ac_cv_target+set}" = set; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+ ac_cv_target_alias=$target_alias
+test "x$ac_cv_target_alias" = "x" &&
+ ac_cv_target_alias=$ac_cv_host_alias
+ac_cv_target=`$ac_config_sub $ac_cv_target_alias` ||
+ { { echo "$as_me:$LINENO: error: $ac_config_sub $ac_cv_target_alias failed" >&5
+echo "$as_me: error: $ac_config_sub $ac_cv_target_alias failed" >&2;}
+ { (exit 1); exit 1; }; }
+
+fi
+echo "$as_me:$LINENO: result: $ac_cv_target" >&5
+echo "${ECHO_T}$ac_cv_target" >&6
+target=$ac_cv_target
+target_cpu=`echo $ac_cv_target | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\1/'`
+target_vendor=`echo $ac_cv_target | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\2/'`
+target_os=`echo $ac_cv_target | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'`
+
+
+# The aliases save the names the user supplied, while $host etc.
+# will get canonicalized.
+test -n "$target_alias" &&
+ test "$program_prefix$program_suffix$program_transform_name" = \
+ NONENONEs,x,x, &&
+ program_prefix=${target_alias}-
+
+# Default decimal format
+# If you change the defaults here, be sure to change them in the GCC directory also
+echo "$as_me:$LINENO: checking for decimal floating point" >&5
+echo $ECHO_N "checking for decimal floating point... $ECHO_C" >&6
+# Check whether --enable-decimal-float or --disable-decimal-float was given.
+if test "${enable_decimal_float+set}" = set; then
+ enableval="$enable_decimal_float"
+
+ case $enable_decimal_float in
+ yes | no | bid | dpd) ;;
+ *) { { echo "$as_me:$LINENO: error: '$enable_decimal_float' is an invalid value for --enable-decimal-float.
+Valid choices are 'yes', 'bid', 'dpd', and 'no'." >&5
+echo "$as_me: error: '$enable_decimal_float' is an invalid value for --enable-decimal-float.
+Valid choices are 'yes', 'bid', 'dpd', and 'no'." >&2;}
+ { (exit 1); exit 1; }; } ;;
+ esac
+
+else
+
+ case $target in
+ powerpc*-*-linux* | i?86*-*-linux* | x86_64*-*-linux*)
+ enable_decimal_float=yes
+ ;;
+ *)
+ enable_decimal_float=no
+ ;;
+ esac
+
+fi;
+
+# x86's use BID format instead of DPD
+# In theory --enable-decimal-float=no should not compile anything
+# For the sake of simplicity, just use the default format in this directory
+if test x$enable_decimal_float = xyes -o x$enable_decimal_float = xno; then
+ case $target in
+ i?86*-*-linux* | x86_64*-*-linux*)
+ enable_decimal_float=bid
+ ;;
+ *)
+ enable_decimal_float=dpd
+ ;;
+ esac
+fi
+
+echo "$as_me:$LINENO: result: $enable_decimal_float" >&5
+echo "${ECHO_T}$enable_decimal_float" >&6
+
+
+echo "$as_me:$LINENO: checking whether byte ordering is bigendian" >&5
+echo $ECHO_N "checking whether byte ordering is bigendian... $ECHO_C" >&6
+if test "${ac_cv_c_bigendian+set}" = set; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+ # See if sys/param.h defines the BYTE_ORDER macro.
+cat >conftest.$ac_ext <<_ACEOF
+/* confdefs.h. */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h. */
+#include <sys/types.h>
+#include <sys/param.h>
+
+int
+main ()
+{
+#if !BYTE_ORDER || !BIG_ENDIAN || !LITTLE_ENDIAN
+ bogus endian macros
+#endif
+
+ ;
+ return 0;
+}
+_ACEOF
+rm -f conftest.$ac_objext
+if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
+ (eval $ac_compile) 2>conftest.er1
+ ac_status=$?
+ grep -v '^ *+' conftest.er1 >conftest.err
+ rm -f conftest.er1
+ cat conftest.err >&5
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); } &&
+ { ac_try='test -z "$ac_c_werror_flag"
+ || test ! -s conftest.err'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; } &&
+ { ac_try='test -s conftest.$ac_objext'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; }; then
+ # It does; now see whether it defined to BIG_ENDIAN or not.
+cat >conftest.$ac_ext <<_ACEOF
+/* confdefs.h. */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h. */
+#include <sys/types.h>
+#include <sys/param.h>
+
+int
+main ()
+{
+#if BYTE_ORDER != BIG_ENDIAN
+ not big endian
+#endif
+
+ ;
+ return 0;
+}
+_ACEOF
+rm -f conftest.$ac_objext
+if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
+ (eval $ac_compile) 2>conftest.er1
+ ac_status=$?
+ grep -v '^ *+' conftest.er1 >conftest.err
+ rm -f conftest.er1
+ cat conftest.err >&5
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); } &&
+ { ac_try='test -z "$ac_c_werror_flag"
+ || test ! -s conftest.err'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; } &&
+ { ac_try='test -s conftest.$ac_objext'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; }; then
+ ac_cv_c_bigendian=yes
+else
+ echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+ac_cv_c_bigendian=no
+fi
+rm -f conftest.err conftest.$ac_objext conftest.$ac_ext
+else
+ echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+# It does not; compile a test program.
+if test "$cross_compiling" = yes; then
+ # try to guess the endianness by grepping values into an object file
+ ac_cv_c_bigendian=unknown
+ cat >conftest.$ac_ext <<_ACEOF
+/* confdefs.h. */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h. */
+short ascii_mm[] = { 0x4249, 0x4765, 0x6E44, 0x6961, 0x6E53, 0x7953, 0 };
+short ascii_ii[] = { 0x694C, 0x5454, 0x656C, 0x6E45, 0x6944, 0x6E61, 0 };
+void _ascii () { char *s = (char *) ascii_mm; s = (char *) ascii_ii; }
+short ebcdic_ii[] = { 0x89D3, 0xE3E3, 0x8593, 0x95C5, 0x89C4, 0x9581, 0 };
+short ebcdic_mm[] = { 0xC2C9, 0xC785, 0x95C4, 0x8981, 0x95E2, 0xA8E2, 0 };
+void _ebcdic () { char *s = (char *) ebcdic_mm; s = (char *) ebcdic_ii; }
+int
+main ()
+{
+ _ascii (); _ebcdic ();
+ ;
+ return 0;
+}
+_ACEOF
+rm -f conftest.$ac_objext
+if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
+ (eval $ac_compile) 2>conftest.er1
+ ac_status=$?
+ grep -v '^ *+' conftest.er1 >conftest.err
+ rm -f conftest.er1
+ cat conftest.err >&5
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); } &&
+ { ac_try='test -z "$ac_c_werror_flag"
+ || test ! -s conftest.err'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; } &&
+ { ac_try='test -s conftest.$ac_objext'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; }; then
+ if grep BIGenDianSyS conftest.$ac_objext >/dev/null ; then
+ ac_cv_c_bigendian=yes
+fi
+if grep LiTTleEnDian conftest.$ac_objext >/dev/null ; then
+ if test "$ac_cv_c_bigendian" = unknown; then
+ ac_cv_c_bigendian=no
+ else
+ # finding both strings is unlikely to happen, but who knows?
+ ac_cv_c_bigendian=unknown
+ fi
+fi
+else
+ echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+fi
+rm -f conftest.err conftest.$ac_objext conftest.$ac_ext
+else
+ cat >conftest.$ac_ext <<_ACEOF
+/* confdefs.h. */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h. */
+int
+main ()
+{
+ /* Are we little or big endian? From Harbison&Steele. */
+ union
+ {
+ long l;
+ char c[sizeof (long)];
+ } u;
+ u.l = 1;
+ exit (u.c[sizeof (long) - 1] == 1);
+}
+_ACEOF
+rm -f conftest$ac_exeext
+if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
+ (eval $ac_link) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); } && { ac_try='./conftest$ac_exeext'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; }; then
+ ac_cv_c_bigendian=no
+else
+ echo "$as_me: program exited with status $ac_status" >&5
+echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+( exit $ac_status )
+ac_cv_c_bigendian=yes
+fi
+rm -f core *.core gmon.out bb.out conftest$ac_exeext conftest.$ac_objext conftest.$ac_ext
+fi
+fi
+rm -f conftest.err conftest.$ac_objext conftest.$ac_ext
+fi
+echo "$as_me:$LINENO: result: $ac_cv_c_bigendian" >&5
+echo "${ECHO_T}$ac_cv_c_bigendian" >&6
+case $ac_cv_c_bigendian in
+ yes)
+
+cat >>confdefs.h <<\_ACEOF
+#define WORDS_BIGENDIAN 1
+_ACEOF
+ ;;
+ no)
+ ;;
+ *)
+ { { echo "$as_me:$LINENO: error: unknown endianness
+presetting ac_cv_c_bigendian=no (or yes) will help" >&5
+echo "$as_me: error: unknown endianness
+presetting ac_cv_c_bigendian=no (or yes) will help" >&2;}
+ { (exit 1); exit 1; }; } ;;
+esac
+
+
+# Output.
+
+ ac_config_headers="$ac_config_headers config.h:config.in"
+
+ ac_config_files="$ac_config_files Makefile"
+
+cat >confcache <<\_ACEOF
+# This file is a shell script that caches the results of configure
+# tests run on this system so they can be shared between configure
+# scripts and configure runs, see configure's option --config-cache.
+# It is not useful on other systems. If it contains results you don't
+# want to keep, you may remove or edit it.
+#
+# config.status only pays attention to the cache file if you give it
+# the --recheck option to rerun configure.
+#
+# `ac_cv_env_foo' variables (set or unset) will be overridden when
+# loading this file, other *unset* `ac_cv_foo' will be assigned the
+# following values.
+
+_ACEOF
+
+# The following way of writing the cache mishandles newlines in values,
+# but we know of no workaround that is simple, portable, and efficient.
+# So, don't put newlines in cache variables' values.
+# Ultrix sh set writes to stderr and can't be redirected directly,
+# and sets the high bit in the cache file unless we assign to the vars.
+{
+ (set) 2>&1 |
+ case `(ac_space=' '; set | grep ac_space) 2>&1` in
+ *ac_space=\ *)
+ # `set' does not quote correctly, so add quotes (double-quote
+ # substitution turns \\\\ into \\, and sed turns \\ into \).
+ sed -n \
+ "s/'/'\\\\''/g;
+ s/^\\([_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\\)=\\(.*\\)/\\1='\\2'/p"
+ ;;
+ *)
+ # `set' quotes correctly as required by POSIX, so do not add quotes.
+ sed -n \
+ "s/^\\([_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\\)=\\(.*\\)/\\1=\\2/p"
+ ;;
+ esac;
+} |
+ sed '
+ t clear
+ : clear
+ s/^\([^=]*\)=\(.*[{}].*\)$/test "${\1+set}" = set || &/
+ t end
+ /^ac_cv_env/!s/^\([^=]*\)=\(.*\)$/\1=${\1=\2}/
+ : end' >>confcache
+if diff $cache_file confcache >/dev/null 2>&1; then :; else
+ if test -w $cache_file; then
+ test "x$cache_file" != "x/dev/null" && echo "updating cache $cache_file"
+ cat confcache >$cache_file
+ else
+ echo "not updating unwritable cache $cache_file"
+ fi
+fi
+rm -f confcache
+
+test "x$prefix" = xNONE && prefix=$ac_default_prefix
+# Let make expand exec_prefix.
+test "x$exec_prefix" = xNONE && exec_prefix='${prefix}'
+
+# VPATH may cause trouble with some makes, so we remove $(srcdir),
+# ${srcdir} and @srcdir@ from VPATH if srcdir is ".", strip leading and
+# trailing colons and then remove the whole line if VPATH becomes empty
+# (actually we leave an empty line to preserve line numbers).
+if test "x$srcdir" = x.; then
+ ac_vpsub='/^[ ]*VPATH[ ]*=/{
+s/:*\$(srcdir):*/:/;
+s/:*\${srcdir}:*/:/;
+s/:*@srcdir@:*/:/;
+s/^\([^=]*=[ ]*\):*/\1/;
+s/:*$//;
+s/^[^=]*=[ ]*$//;
+}'
+fi
+
+DEFS=-DHAVE_CONFIG_H
+
+ac_libobjs=
+ac_ltlibobjs=
+for ac_i in : $LIBOBJS; do test "x$ac_i" = x: && continue
+ # 1. Remove the extension, and $U if already installed.
+ ac_i=`echo "$ac_i" |
+ sed 's/\$U\././;s/\.o$//;s/\.obj$//'`
+ # 2. Add them.
+ ac_libobjs="$ac_libobjs $ac_i\$U.$ac_objext"
+ ac_ltlibobjs="$ac_ltlibobjs $ac_i"'$U.lo'
+done
+LIBOBJS=$ac_libobjs
+
+LTLIBOBJS=$ac_ltlibobjs
+
+
+
+: ${CONFIG_STATUS=./config.status}
+ac_clean_files_save=$ac_clean_files
+ac_clean_files="$ac_clean_files $CONFIG_STATUS"
+{ echo "$as_me:$LINENO: creating $CONFIG_STATUS" >&5
+echo "$as_me: creating $CONFIG_STATUS" >&6;}
+cat >$CONFIG_STATUS <<_ACEOF
+#! $SHELL
+# Generated by $as_me.
+# Run this file to recreate the current configuration.
+# Compiler output produced by configure, useful for debugging
+# configure, is in config.log if it exists.
+
+debug=false
+ac_cs_recheck=false
+ac_cs_silent=false
+SHELL=\${CONFIG_SHELL-$SHELL}
+_ACEOF
+
+cat >>$CONFIG_STATUS <<\_ACEOF
+## --------------------- ##
+## M4sh Initialization. ##
+## --------------------- ##
+
+# Be Bourne compatible
+if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then
+ emulate sh
+ NULLCMD=:
+ # Zsh 3.x and 4.x performs word splitting on ${1+"$@"}, which
+ # is contrary to our usage. Disable this feature.
+ alias -g '${1+"$@"}'='"$@"'
+elif test -n "${BASH_VERSION+set}" && (set -o posix) >/dev/null 2>&1; then
+ set -o posix
+fi
+DUALCASE=1; export DUALCASE # for MKS sh
+
+# Support unset when possible.
+if ( (MAIL=60; unset MAIL) || exit) >/dev/null 2>&1; then
+ as_unset=unset
+else
+ as_unset=false
+fi
+
+
+# Work around bugs in pre-3.0 UWIN ksh.
+$as_unset ENV MAIL MAILPATH
+PS1='$ '
+PS2='> '
+PS4='+ '
+
+# NLS nuisances.
+for as_var in \
+ LANG LANGUAGE LC_ADDRESS LC_ALL LC_COLLATE LC_CTYPE LC_IDENTIFICATION \
+ LC_MEASUREMENT LC_MESSAGES LC_MONETARY LC_NAME LC_NUMERIC LC_PAPER \
+ LC_TELEPHONE LC_TIME
+do
+ if (set +x; test -z "`(eval $as_var=C; export $as_var) 2>&1`"); then
+ eval $as_var=C; export $as_var
+ else
+ $as_unset $as_var
+ fi
+done
+
+# Required to use basename.
+if expr a : '\(a\)' >/dev/null 2>&1; then
+ as_expr=expr
+else
+ as_expr=false
+fi
+
+if (basename /) >/dev/null 2>&1 && test "X`basename / 2>&1`" = "X/"; then
+ as_basename=basename
+else
+ as_basename=false
+fi
+
+
+# Name of the executable.
+as_me=`$as_basename "$0" ||
+$as_expr X/"$0" : '.*/\([^/][^/]*\)/*$' \| \
+ X"$0" : 'X\(//\)$' \| \
+ X"$0" : 'X\(/\)$' \| \
+ . : '\(.\)' 2>/dev/null ||
+echo X/"$0" |
+ sed '/^.*\/\([^/][^/]*\)\/*$/{ s//\1/; q; }
+ /^X\/\(\/\/\)$/{ s//\1/; q; }
+ /^X\/\(\/\).*/{ s//\1/; q; }
+ s/.*/./; q'`
+
+
+# PATH needs CR, and LINENO needs CR and PATH.
+# Avoid depending upon Character Ranges.
+as_cr_letters='abcdefghijklmnopqrstuvwxyz'
+as_cr_LETTERS='ABCDEFGHIJKLMNOPQRSTUVWXYZ'
+as_cr_Letters=$as_cr_letters$as_cr_LETTERS
+as_cr_digits='0123456789'
+as_cr_alnum=$as_cr_Letters$as_cr_digits
+
+# The user is always right.
+if test "${PATH_SEPARATOR+set}" != set; then
+ echo "#! /bin/sh" >conf$$.sh
+ echo "exit 0" >>conf$$.sh
+ chmod +x conf$$.sh
+ if (PATH="/nonexistent;."; conf$$.sh) >/dev/null 2>&1; then
+ PATH_SEPARATOR=';'
+ else
+ PATH_SEPARATOR=:
+ fi
+ rm -f conf$$.sh
+fi
+
+
+ as_lineno_1=$LINENO
+ as_lineno_2=$LINENO
+ as_lineno_3=`(expr $as_lineno_1 + 1) 2>/dev/null`
+ test "x$as_lineno_1" != "x$as_lineno_2" &&
+ test "x$as_lineno_3" = "x$as_lineno_2" || {
+ # Find who we are. Look in the path if we contain no path at all
+ # relative or not.
+ case $0 in
+ *[\\/]* ) as_myself=$0 ;;
+ *) as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ test -r "$as_dir/$0" && as_myself=$as_dir/$0 && break
+done
+
+ ;;
+ esac
+ # We did not find ourselves, most probably we were run as `sh COMMAND'
+ # in which case we are not to be found in the path.
+ if test "x$as_myself" = x; then
+ as_myself=$0
+ fi
+ if test ! -f "$as_myself"; then
+ { { echo "$as_me:$LINENO: error: cannot find myself; rerun with an absolute path" >&5
+echo "$as_me: error: cannot find myself; rerun with an absolute path" >&2;}
+ { (exit 1); exit 1; }; }
+ fi
+ case $CONFIG_SHELL in
+ '')
+ as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in /bin$PATH_SEPARATOR/usr/bin$PATH_SEPARATOR$PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for as_base in sh bash ksh sh5; do
+ case $as_dir in
+ /*)
+ if ("$as_dir/$as_base" -c '
+ as_lineno_1=$LINENO
+ as_lineno_2=$LINENO
+ as_lineno_3=`(expr $as_lineno_1 + 1) 2>/dev/null`
+ test "x$as_lineno_1" != "x$as_lineno_2" &&
+ test "x$as_lineno_3" = "x$as_lineno_2" ') 2>/dev/null; then
+ $as_unset BASH_ENV || test "${BASH_ENV+set}" != set || { BASH_ENV=; export BASH_ENV; }
+ $as_unset ENV || test "${ENV+set}" != set || { ENV=; export ENV; }
+ CONFIG_SHELL=$as_dir/$as_base
+ export CONFIG_SHELL
+ exec "$CONFIG_SHELL" "$0" ${1+"$@"}
+ fi;;
+ esac
+ done
+done
+;;
+ esac
+
+ # Create $as_me.lineno as a copy of $as_myself, but with $LINENO
+ # uniformly replaced by the line number. The first 'sed' inserts a
+ # line-number line before each line; the second 'sed' does the real
+ # work. The second script uses 'N' to pair each line-number line
+ # with the numbered line, and appends trailing '-' during
+ # substitution so that $LINENO is not a special case at line end.
+ # (Raja R Harinath suggested sed '=', and Paul Eggert wrote the
+ # second 'sed' script. Blame Lee E. McMahon for sed's syntax. :-)
+ sed '=' <$as_myself |
+ sed '
+ N
+ s,$,-,
+ : loop
+ s,^\(['$as_cr_digits']*\)\(.*\)[$]LINENO\([^'$as_cr_alnum'_]\),\1\2\1\3,
+ t loop
+ s,-$,,
+ s,^['$as_cr_digits']*\n,,
+ ' >$as_me.lineno &&
+ chmod +x $as_me.lineno ||
+ { { echo "$as_me:$LINENO: error: cannot create $as_me.lineno; rerun with a POSIX shell" >&5
+echo "$as_me: error: cannot create $as_me.lineno; rerun with a POSIX shell" >&2;}
+ { (exit 1); exit 1; }; }
+
+ # Don't try to exec as it changes $[0], causing all sort of problems
+ # (the dirname of $[0] is not the place where we might find the
+ # original and so on. Autoconf is especially sensible to this).
+ . ./$as_me.lineno
+ # Exit status is that of the last command.
+ exit
+}
+
+
+case `echo "testing\c"; echo 1,2,3`,`echo -n testing; echo 1,2,3` in
+ *c*,-n*) ECHO_N= ECHO_C='
+' ECHO_T=' ' ;;
+ *c*,* ) ECHO_N=-n ECHO_C= ECHO_T= ;;
+ *) ECHO_N= ECHO_C='\c' ECHO_T= ;;
+esac
+
+if expr a : '\(a\)' >/dev/null 2>&1; then
+ as_expr=expr
+else
+ as_expr=false
+fi
+
+rm -f conf$$ conf$$.exe conf$$.file
+echo >conf$$.file
+if ln -s conf$$.file conf$$ 2>/dev/null; then
+ # We could just check for DJGPP; but this test a) works b) is more generic
+ # and c) will remain valid once DJGPP supports symlinks (DJGPP 2.04).
+ if test -f conf$$.exe; then
+ # Don't use ln at all; we don't have any links
+ as_ln_s='cp -p'
+ else
+ as_ln_s='ln -s'
+ fi
+elif ln conf$$.file conf$$ 2>/dev/null; then
+ as_ln_s=ln
+else
+ as_ln_s='cp -p'
+fi
+rm -f conf$$ conf$$.exe conf$$.file
+
+if mkdir -p . 2>/dev/null; then
+ as_mkdir_p=:
+else
+ test -d ./-p && rmdir ./-p
+ as_mkdir_p=false
+fi
+
+as_executable_p="test -f"
+
+# Sed expression to map a string onto a valid CPP name.
+as_tr_cpp="eval sed 'y%*$as_cr_letters%P$as_cr_LETTERS%;s%[^_$as_cr_alnum]%_%g'"
+
+# Sed expression to map a string onto a valid variable name.
+as_tr_sh="eval sed 'y%*+%pp%;s%[^_$as_cr_alnum]%_%g'"
+
+
+# IFS
+# We need space, tab and new line, in precisely that order.
+as_nl='
+'
+IFS=" $as_nl"
+
+# CDPATH.
+$as_unset CDPATH
+
+exec 6>&1
+
+# Open the log real soon, to keep \$[0] and so on meaningful, and to
+# report actual input values of CONFIG_FILES etc. instead of their
+# values after options handling. Logging --version etc. is OK.
+exec 5>>config.log
+{
+ echo
+ sed 'h;s/./-/g;s/^.../## /;s/...$/ ##/;p;x;p;x' <<_ASBOX
+## Running $as_me. ##
+_ASBOX
+} >&5
+cat >&5 <<_CSEOF
+
+This file was extended by libdecnumber $as_me , which was
+generated by GNU Autoconf 2.59. Invocation command line was
+
+ CONFIG_FILES = $CONFIG_FILES
+ CONFIG_HEADERS = $CONFIG_HEADERS
+ CONFIG_LINKS = $CONFIG_LINKS
+ CONFIG_COMMANDS = $CONFIG_COMMANDS
+ $ $0 $@
+
+_CSEOF
+echo "on `(hostname || uname -n) 2>/dev/null | sed 1q`" >&5
+echo >&5
+_ACEOF
+
+# Files that config.status was made for.
+if test -n "$ac_config_files"; then
+ echo "config_files=\"$ac_config_files\"" >>$CONFIG_STATUS
+fi
+
+if test -n "$ac_config_headers"; then
+ echo "config_headers=\"$ac_config_headers\"" >>$CONFIG_STATUS
+fi
+
+if test -n "$ac_config_links"; then
+ echo "config_links=\"$ac_config_links\"" >>$CONFIG_STATUS
+fi
+
+if test -n "$ac_config_commands"; then
+ echo "config_commands=\"$ac_config_commands\"" >>$CONFIG_STATUS
+fi
+
+cat >>$CONFIG_STATUS <<\_ACEOF
+
+ac_cs_usage="\
+\`$as_me' instantiates files from templates according to the
+current configuration.
+
+Usage: $0 [OPTIONS] [FILE]...
+
+ -h, --help print this help, then exit
+ -V, --version print version number, then exit
+ -q, --quiet do not print progress messages
+ -d, --debug don't remove temporary files
+ --recheck update $as_me by reconfiguring in the same conditions
+ --file=FILE[:TEMPLATE]
+ instantiate the configuration file FILE
+ --header=FILE[:TEMPLATE]
+ instantiate the configuration header FILE
+
+Configuration files:
+$config_files
+
+Configuration headers:
+$config_headers
+
+Configuration commands:
+$config_commands
+
+Report bugs to <bug-autoconf@gnu.org>."
+_ACEOF
+
+cat >>$CONFIG_STATUS <<_ACEOF
+ac_cs_version="\\
+libdecnumber config.status
+configured by $0, generated by GNU Autoconf 2.59,
+ with options \\"`echo "$ac_configure_args" | sed 's/[\\""\`\$]/\\\\&/g'`\\"
+
+Copyright (C) 2003 Free Software Foundation, Inc.
+This config.status script is free software; the Free Software Foundation
+gives unlimited permission to copy, distribute and modify it."
+srcdir=$srcdir
+_ACEOF
+
+cat >>$CONFIG_STATUS <<\_ACEOF
+# If no file are specified by the user, then we need to provide default
+# value. By we need to know if files were specified by the user.
+ac_need_defaults=:
+while test $# != 0
+do
+ case $1 in
+ --*=*)
+ ac_option=`expr "x$1" : 'x\([^=]*\)='`
+ ac_optarg=`expr "x$1" : 'x[^=]*=\(.*\)'`
+ ac_shift=:
+ ;;
+ -*)
+ ac_option=$1
+ ac_optarg=$2
+ ac_shift=shift
+ ;;
+ *) # This is not an option, so the user has probably given explicit
+ # arguments.
+ ac_option=$1
+ ac_need_defaults=false;;
+ esac
+
+ case $ac_option in
+ # Handling of the options.
+_ACEOF
+cat >>$CONFIG_STATUS <<\_ACEOF
+ -recheck | --recheck | --rechec | --reche | --rech | --rec | --re | --r)
+ ac_cs_recheck=: ;;
+ --version | --vers* | -V )
+ echo "$ac_cs_version"; exit 0 ;;
+ --he | --h)
+ # Conflict between --help and --header
+ { { echo "$as_me:$LINENO: error: ambiguous option: $1
+Try \`$0 --help' for more information." >&5
+echo "$as_me: error: ambiguous option: $1
+Try \`$0 --help' for more information." >&2;}
+ { (exit 1); exit 1; }; };;
+ --help | --hel | -h )
+ echo "$ac_cs_usage"; exit 0 ;;
+ --debug | --d* | -d )
+ debug=: ;;
+ --file | --fil | --fi | --f )
+ $ac_shift
+ CONFIG_FILES="$CONFIG_FILES $ac_optarg"
+ ac_need_defaults=false;;
+ --header | --heade | --head | --hea )
+ $ac_shift
+ CONFIG_HEADERS="$CONFIG_HEADERS $ac_optarg"
+ ac_need_defaults=false;;
+ -q | -quiet | --quiet | --quie | --qui | --qu | --q \
+ | -silent | --silent | --silen | --sile | --sil | --si | --s)
+ ac_cs_silent=: ;;
+
+ # This is an error.
+ -*) { { echo "$as_me:$LINENO: error: unrecognized option: $1
+Try \`$0 --help' for more information." >&5
+echo "$as_me: error: unrecognized option: $1
+Try \`$0 --help' for more information." >&2;}
+ { (exit 1); exit 1; }; } ;;
+
+ *) ac_config_targets="$ac_config_targets $1" ;;
+
+ esac
+ shift
+done
+
+ac_configure_extra_args=
+
+if $ac_cs_silent; then
+ exec 6>/dev/null
+ ac_configure_extra_args="$ac_configure_extra_args --silent"
+fi
+
+_ACEOF
+cat >>$CONFIG_STATUS <<_ACEOF
+if \$ac_cs_recheck; then
+ echo "running $SHELL $0 " $ac_configure_args \$ac_configure_extra_args " --no-create --no-recursion" >&6
+ exec $SHELL $0 $ac_configure_args \$ac_configure_extra_args --no-create --no-recursion
+fi
+
+_ACEOF
+
+cat >>$CONFIG_STATUS <<_ACEOF
+#
+# INIT-COMMANDS section.
+#
+
+
+GCC="$GCC"
+CC="$CC"
+acx_cv_header_stdint="$acx_cv_header_stdint"
+acx_cv_type_int8_t="$acx_cv_type_int8_t"
+acx_cv_type_int16_t="$acx_cv_type_int16_t"
+acx_cv_type_int32_t="$acx_cv_type_int32_t"
+acx_cv_type_int64_t="$acx_cv_type_int64_t"
+acx_cv_type_intptr_t="$acx_cv_type_intptr_t"
+ac_cv_type_uintmax_t="$ac_cv_type_uintmax_t"
+ac_cv_type_uintptr_t="$ac_cv_type_uintptr_t"
+ac_cv_type_uint64_t="$ac_cv_type_uint64_t"
+ac_cv_type_u_int64_t="$ac_cv_type_u_int64_t"
+ac_cv_type_u_int32_t="$ac_cv_type_u_int32_t"
+ac_cv_type_int_least32_t="$ac_cv_type_int_least32_t"
+ac_cv_type_int_fast32_t="$ac_cv_type_int_fast32_t"
+ac_cv_sizeof_void_p="$ac_cv_sizeof_void_p"
+
+
+_ACEOF
+
+
+
+cat >>$CONFIG_STATUS <<\_ACEOF
+for ac_config_target in $ac_config_targets
+do
+ case "$ac_config_target" in
+ # Handling of arguments.
+ "Makefile" ) CONFIG_FILES="$CONFIG_FILES Makefile" ;;
+ "gstdint.h" ) CONFIG_COMMANDS="$CONFIG_COMMANDS gstdint.h" ;;
+ "config.h" ) CONFIG_HEADERS="$CONFIG_HEADERS config.h:config.in" ;;
+ *) { { echo "$as_me:$LINENO: error: invalid argument: $ac_config_target" >&5
+echo "$as_me: error: invalid argument: $ac_config_target" >&2;}
+ { (exit 1); exit 1; }; };;
+ esac
+done
+
+# If the user did not use the arguments to specify the items to instantiate,
+# then the envvar interface is used. Set only those that are not.
+# We use the long form for the default assignment because of an extremely
+# bizarre bug on SunOS 4.1.3.
+if $ac_need_defaults; then
+ test "${CONFIG_FILES+set}" = set || CONFIG_FILES=$config_files
+ test "${CONFIG_HEADERS+set}" = set || CONFIG_HEADERS=$config_headers
+ test "${CONFIG_COMMANDS+set}" = set || CONFIG_COMMANDS=$config_commands
+fi
+
+# Have a temporary directory for convenience. Make it in the build tree
+# simply because there is no reason to put it here, and in addition,
+# creating and moving files from /tmp can sometimes cause problems.
+# Create a temporary directory, and hook for its removal unless debugging.
+$debug ||
+{
+ trap 'exit_status=$?; rm -rf $tmp && exit $exit_status' 0
+ trap '{ (exit 1); exit 1; }' 1 2 13 15
+}
+
+# Create a (secure) tmp directory for tmp files.
+
+{
+ tmp=`(umask 077 && mktemp -d -q "./confstatXXXXXX") 2>/dev/null` &&
+ test -n "$tmp" && test -d "$tmp"
+} ||
+{
+ tmp=./confstat$$-$RANDOM
+ (umask 077 && mkdir $tmp)
+} ||
+{
+ echo "$me: cannot create a temporary directory in ." >&2
+ { (exit 1); exit 1; }
+}
+
+_ACEOF
+
+cat >>$CONFIG_STATUS <<_ACEOF
+
+#
+# CONFIG_FILES section.
+#
+
+# No need to generate the scripts if there are no CONFIG_FILES.
+# This happens for instance when ./config.status config.h
+if test -n "\$CONFIG_FILES"; then
+ # Protect against being on the right side of a sed subst in config.status.
+ sed 's/,@/@@/; s/@,/@@/; s/,;t t\$/@;t t/; /@;t t\$/s/[\\\\&,]/\\\\&/g;
+ s/@@/,@/; s/@@/@,/; s/@;t t\$/,;t t/' >\$tmp/subs.sed <<\\CEOF
+s,@SHELL@,$SHELL,;t t
+s,@PATH_SEPARATOR@,$PATH_SEPARATOR,;t t
+s,@PACKAGE_NAME@,$PACKAGE_NAME,;t t
+s,@PACKAGE_TARNAME@,$PACKAGE_TARNAME,;t t
+s,@PACKAGE_VERSION@,$PACKAGE_VERSION,;t t
+s,@PACKAGE_STRING@,$PACKAGE_STRING,;t t
+s,@PACKAGE_BUGREPORT@,$PACKAGE_BUGREPORT,;t t
+s,@exec_prefix@,$exec_prefix,;t t
+s,@prefix@,$prefix,;t t
+s,@program_transform_name@,$program_transform_name,;t t
+s,@bindir@,$bindir,;t t
+s,@sbindir@,$sbindir,;t t
+s,@libexecdir@,$libexecdir,;t t
+s,@datadir@,$datadir,;t t
+s,@sysconfdir@,$sysconfdir,;t t
+s,@sharedstatedir@,$sharedstatedir,;t t
+s,@localstatedir@,$localstatedir,;t t
+s,@libdir@,$libdir,;t t
+s,@includedir@,$includedir,;t t
+s,@oldincludedir@,$oldincludedir,;t t
+s,@infodir@,$infodir,;t t
+s,@mandir@,$mandir,;t t
+s,@build_alias@,$build_alias,;t t
+s,@host_alias@,$host_alias,;t t
+s,@target_alias@,$target_alias,;t t
+s,@DEFS@,$DEFS,;t t
+s,@ECHO_C@,$ECHO_C,;t t
+s,@ECHO_N@,$ECHO_N,;t t
+s,@ECHO_T@,$ECHO_T,;t t
+s,@LIBS@,$LIBS,;t t
+s,@SET_MAKE@,$SET_MAKE,;t t
+s,@CC@,$CC,;t t
+s,@CFLAGS@,$CFLAGS,;t t
+s,@LDFLAGS@,$LDFLAGS,;t t
+s,@CPPFLAGS@,$CPPFLAGS,;t t
+s,@ac_ct_CC@,$ac_ct_CC,;t t
+s,@EXEEXT@,$EXEEXT,;t t
+s,@OBJEXT@,$OBJEXT,;t t
+s,@RANLIB@,$RANLIB,;t t
+s,@ac_ct_RANLIB@,$ac_ct_RANLIB,;t t
+s,@ACLOCAL@,$ACLOCAL,;t t
+s,@AUTOCONF@,$AUTOCONF,;t t
+s,@AUTOHEADER@,$AUTOHEADER,;t t
+s,@WARN_CFLAGS@,$WARN_CFLAGS,;t t
+s,@WARN_PEDANTIC@,$WARN_PEDANTIC,;t t
+s,@WERROR@,$WERROR,;t t
+s,@CPP@,$CPP,;t t
+s,@EGREP@,$EGREP,;t t
+s,@MAINT@,$MAINT,;t t
+s,@build@,$build,;t t
+s,@build_cpu@,$build_cpu,;t t
+s,@build_vendor@,$build_vendor,;t t
+s,@build_os@,$build_os,;t t
+s,@host@,$host,;t t
+s,@host_cpu@,$host_cpu,;t t
+s,@host_vendor@,$host_vendor,;t t
+s,@host_os@,$host_os,;t t
+s,@target@,$target,;t t
+s,@target_cpu@,$target_cpu,;t t
+s,@target_vendor@,$target_vendor,;t t
+s,@target_os@,$target_os,;t t
+s,@enable_decimal_float@,$enable_decimal_float,;t t
+s,@LIBOBJS@,$LIBOBJS,;t t
+s,@LTLIBOBJS@,$LTLIBOBJS,;t t
+CEOF
+
+_ACEOF
+
+ cat >>$CONFIG_STATUS <<\_ACEOF
+ # Split the substitutions into bite-sized pieces for seds with
+ # small command number limits, like on Digital OSF/1 and HP-UX.
+ ac_max_sed_lines=48
+ ac_sed_frag=1 # Number of current file.
+ ac_beg=1 # First line for current file.
+ ac_end=$ac_max_sed_lines # Line after last line for current file.
+ ac_more_lines=:
+ ac_sed_cmds=
+ while $ac_more_lines; do
+ if test $ac_beg -gt 1; then
+ sed "1,${ac_beg}d; ${ac_end}q" $tmp/subs.sed >$tmp/subs.frag
+ else
+ sed "${ac_end}q" $tmp/subs.sed >$tmp/subs.frag
+ fi
+ if test ! -s $tmp/subs.frag; then
+ ac_more_lines=false
+ else
+ # The purpose of the label and of the branching condition is to
+ # speed up the sed processing (if there are no `@' at all, there
+ # is no need to browse any of the substitutions).
+ # These are the two extra sed commands mentioned above.
+ (echo ':t
+ /@[a-zA-Z_][a-zA-Z_0-9]*@/!b' && cat $tmp/subs.frag) >$tmp/subs-$ac_sed_frag.sed
+ if test -z "$ac_sed_cmds"; then
+ ac_sed_cmds="sed -f $tmp/subs-$ac_sed_frag.sed"
+ else
+ ac_sed_cmds="$ac_sed_cmds | sed -f $tmp/subs-$ac_sed_frag.sed"
+ fi
+ ac_sed_frag=`expr $ac_sed_frag + 1`
+ ac_beg=$ac_end
+ ac_end=`expr $ac_end + $ac_max_sed_lines`
+ fi
+ done
+ if test -z "$ac_sed_cmds"; then
+ ac_sed_cmds=cat
+ fi
+fi # test -n "$CONFIG_FILES"
+
+_ACEOF
+cat >>$CONFIG_STATUS <<\_ACEOF
+for ac_file in : $CONFIG_FILES; do test "x$ac_file" = x: && continue
+ # Support "outfile[:infile[:infile...]]", defaulting infile="outfile.in".
+ case $ac_file in
+ - | *:- | *:-:* ) # input from stdin
+ cat >$tmp/stdin
+ ac_file_in=`echo "$ac_file" | sed 's,[^:]*:,,'`
+ ac_file=`echo "$ac_file" | sed 's,:.*,,'` ;;
+ *:* ) ac_file_in=`echo "$ac_file" | sed 's,[^:]*:,,'`
+ ac_file=`echo "$ac_file" | sed 's,:.*,,'` ;;
+ * ) ac_file_in=$ac_file.in ;;
+ esac
+
+ # Compute @srcdir@, @top_srcdir@, and @INSTALL@ for subdirectories.
+ ac_dir=`(dirname "$ac_file") 2>/dev/null ||
+$as_expr X"$ac_file" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
+ X"$ac_file" : 'X\(//\)[^/]' \| \
+ X"$ac_file" : 'X\(//\)$' \| \
+ X"$ac_file" : 'X\(/\)' \| \
+ . : '\(.\)' 2>/dev/null ||
+echo X"$ac_file" |
+ sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/; q; }
+ /^X\(\/\/\)[^/].*/{ s//\1/; q; }
+ /^X\(\/\/\)$/{ s//\1/; q; }
+ /^X\(\/\).*/{ s//\1/; q; }
+ s/.*/./; q'`
+ { if $as_mkdir_p; then
+ mkdir -p "$ac_dir"
+ else
+ as_dir="$ac_dir"
+ as_dirs=
+ while test ! -d "$as_dir"; do
+ as_dirs="$as_dir $as_dirs"
+ as_dir=`(dirname "$as_dir") 2>/dev/null ||
+$as_expr X"$as_dir" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
+ X"$as_dir" : 'X\(//\)[^/]' \| \
+ X"$as_dir" : 'X\(//\)$' \| \
+ X"$as_dir" : 'X\(/\)' \| \
+ . : '\(.\)' 2>/dev/null ||
+echo X"$as_dir" |
+ sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/; q; }
+ /^X\(\/\/\)[^/].*/{ s//\1/; q; }
+ /^X\(\/\/\)$/{ s//\1/; q; }
+ /^X\(\/\).*/{ s//\1/; q; }
+ s/.*/./; q'`
+ done
+ test ! -n "$as_dirs" || mkdir $as_dirs
+ fi || { { echo "$as_me:$LINENO: error: cannot create directory \"$ac_dir\"" >&5
+echo "$as_me: error: cannot create directory \"$ac_dir\"" >&2;}
+ { (exit 1); exit 1; }; }; }
+
+ ac_builddir=.
+
+if test "$ac_dir" != .; then
+ ac_dir_suffix=/`echo "$ac_dir" | sed 's,^\.[\\/],,'`
+ # A "../" for each directory in $ac_dir_suffix.
+ ac_top_builddir=`echo "$ac_dir_suffix" | sed 's,/[^\\/]*,../,g'`
+else
+ ac_dir_suffix= ac_top_builddir=
+fi
+
+case $srcdir in
+ .) # No --srcdir option. We are building in place.
+ ac_srcdir=.
+ if test -z "$ac_top_builddir"; then
+ ac_top_srcdir=.
+ else
+ ac_top_srcdir=`echo $ac_top_builddir | sed 's,/$,,'`
+ fi ;;
+ [\\/]* | ?:[\\/]* ) # Absolute path.
+ ac_srcdir=$srcdir$ac_dir_suffix;
+ ac_top_srcdir=$srcdir ;;
+ *) # Relative path.
+ ac_srcdir=$ac_top_builddir$srcdir$ac_dir_suffix
+ ac_top_srcdir=$ac_top_builddir$srcdir ;;
+esac
+
+# Do not use `cd foo && pwd` to compute absolute paths, because
+# the directories may not exist.
+case `pwd` in
+.) ac_abs_builddir="$ac_dir";;
+*)
+ case "$ac_dir" in
+ .) ac_abs_builddir=`pwd`;;
+ [\\/]* | ?:[\\/]* ) ac_abs_builddir="$ac_dir";;
+ *) ac_abs_builddir=`pwd`/"$ac_dir";;
+ esac;;
+esac
+case $ac_abs_builddir in
+.) ac_abs_top_builddir=${ac_top_builddir}.;;
+*)
+ case ${ac_top_builddir}. in
+ .) ac_abs_top_builddir=$ac_abs_builddir;;
+ [\\/]* | ?:[\\/]* ) ac_abs_top_builddir=${ac_top_builddir}.;;
+ *) ac_abs_top_builddir=$ac_abs_builddir/${ac_top_builddir}.;;
+ esac;;
+esac
+case $ac_abs_builddir in
+.) ac_abs_srcdir=$ac_srcdir;;
+*)
+ case $ac_srcdir in
+ .) ac_abs_srcdir=$ac_abs_builddir;;
+ [\\/]* | ?:[\\/]* ) ac_abs_srcdir=$ac_srcdir;;
+ *) ac_abs_srcdir=$ac_abs_builddir/$ac_srcdir;;
+ esac;;
+esac
+case $ac_abs_builddir in
+.) ac_abs_top_srcdir=$ac_top_srcdir;;
+*)
+ case $ac_top_srcdir in
+ .) ac_abs_top_srcdir=$ac_abs_builddir;;
+ [\\/]* | ?:[\\/]* ) ac_abs_top_srcdir=$ac_top_srcdir;;
+ *) ac_abs_top_srcdir=$ac_abs_builddir/$ac_top_srcdir;;
+ esac;;
+esac
+
+
+
+ if test x"$ac_file" != x-; then
+ { echo "$as_me:$LINENO: creating $ac_file" >&5
+echo "$as_me: creating $ac_file" >&6;}
+ rm -f "$ac_file"
+ fi
+ # Let's still pretend it is `configure' which instantiates (i.e., don't
+ # use $as_me), people would be surprised to read:
+ # /* config.h. Generated by config.status. */
+ if test x"$ac_file" = x-; then
+ configure_input=
+ else
+ configure_input="$ac_file. "
+ fi
+ configure_input=$configure_input"Generated from `echo $ac_file_in |
+ sed 's,.*/,,'` by configure."
+
+ # First look for the input files in the build tree, otherwise in the
+ # src tree.
+ ac_file_inputs=`IFS=:
+ for f in $ac_file_in; do
+ case $f in
+ -) echo $tmp/stdin ;;
+ [\\/$]*)
+ # Absolute (can't be DOS-style, as IFS=:)
+ test -f "$f" || { { echo "$as_me:$LINENO: error: cannot find input file: $f" >&5
+echo "$as_me: error: cannot find input file: $f" >&2;}
+ { (exit 1); exit 1; }; }
+ echo "$f";;
+ *) # Relative
+ if test -f "$f"; then
+ # Build tree
+ echo "$f"
+ elif test -f "$srcdir/$f"; then
+ # Source tree
+ echo "$srcdir/$f"
+ else
+ # /dev/null tree
+ { { echo "$as_me:$LINENO: error: cannot find input file: $f" >&5
+echo "$as_me: error: cannot find input file: $f" >&2;}
+ { (exit 1); exit 1; }; }
+ fi;;
+ esac
+ done` || { (exit 1); exit 1; }
+_ACEOF
+cat >>$CONFIG_STATUS <<_ACEOF
+ sed "$ac_vpsub
+$extrasub
+_ACEOF
+cat >>$CONFIG_STATUS <<\_ACEOF
+:t
+/@[a-zA-Z_][a-zA-Z_0-9]*@/!b
+s,@configure_input@,$configure_input,;t t
+s,@srcdir@,$ac_srcdir,;t t
+s,@abs_srcdir@,$ac_abs_srcdir,;t t
+s,@top_srcdir@,$ac_top_srcdir,;t t
+s,@abs_top_srcdir@,$ac_abs_top_srcdir,;t t
+s,@builddir@,$ac_builddir,;t t
+s,@abs_builddir@,$ac_abs_builddir,;t t
+s,@top_builddir@,$ac_top_builddir,;t t
+s,@abs_top_builddir@,$ac_abs_top_builddir,;t t
+" $ac_file_inputs | (eval "$ac_sed_cmds") >$tmp/out
+ rm -f $tmp/stdin
+ if test x"$ac_file" != x-; then
+ mv $tmp/out $ac_file
+ else
+ cat $tmp/out
+ rm -f $tmp/out
+ fi
+
+done
+_ACEOF
+cat >>$CONFIG_STATUS <<\_ACEOF
+
+#
+# CONFIG_HEADER section.
+#
+
+# These sed commands are passed to sed as "A NAME B NAME C VALUE D", where
+# NAME is the cpp macro being defined and VALUE is the value it is being given.
+#
+# ac_d sets the value in "#define NAME VALUE" lines.
+ac_dA='s,^\([ ]*\)#\([ ]*define[ ][ ]*\)'
+ac_dB='[ ].*$,\1#\2'
+ac_dC=' '
+ac_dD=',;t'
+# ac_u turns "#undef NAME" without trailing blanks into "#define NAME VALUE".
+ac_uA='s,^\([ ]*\)#\([ ]*\)undef\([ ][ ]*\)'
+ac_uB='$,\1#\2define\3'
+ac_uC=' '
+ac_uD=',;t'
+
+for ac_file in : $CONFIG_HEADERS; do test "x$ac_file" = x: && continue
+ # Support "outfile[:infile[:infile...]]", defaulting infile="outfile.in".
+ case $ac_file in
+ - | *:- | *:-:* ) # input from stdin
+ cat >$tmp/stdin
+ ac_file_in=`echo "$ac_file" | sed 's,[^:]*:,,'`
+ ac_file=`echo "$ac_file" | sed 's,:.*,,'` ;;
+ *:* ) ac_file_in=`echo "$ac_file" | sed 's,[^:]*:,,'`
+ ac_file=`echo "$ac_file" | sed 's,:.*,,'` ;;
+ * ) ac_file_in=$ac_file.in ;;
+ esac
+
+ test x"$ac_file" != x- && { echo "$as_me:$LINENO: creating $ac_file" >&5
+echo "$as_me: creating $ac_file" >&6;}
+
+ # First look for the input files in the build tree, otherwise in the
+ # src tree.
+ ac_file_inputs=`IFS=:
+ for f in $ac_file_in; do
+ case $f in
+ -) echo $tmp/stdin ;;
+ [\\/$]*)
+ # Absolute (can't be DOS-style, as IFS=:)
+ test -f "$f" || { { echo "$as_me:$LINENO: error: cannot find input file: $f" >&5
+echo "$as_me: error: cannot find input file: $f" >&2;}
+ { (exit 1); exit 1; }; }
+ # Do quote $f, to prevent DOS paths from being IFS'd.
+ echo "$f";;
+ *) # Relative
+ if test -f "$f"; then
+ # Build tree
+ echo "$f"
+ elif test -f "$srcdir/$f"; then
+ # Source tree
+ echo "$srcdir/$f"
+ else
+ # /dev/null tree
+ { { echo "$as_me:$LINENO: error: cannot find input file: $f" >&5
+echo "$as_me: error: cannot find input file: $f" >&2;}
+ { (exit 1); exit 1; }; }
+ fi;;
+ esac
+ done` || { (exit 1); exit 1; }
+ # Remove the trailing spaces.
+ sed 's/[ ]*$//' $ac_file_inputs >$tmp/in
+
+_ACEOF
+
+# Transform confdefs.h into two sed scripts, `conftest.defines' and
+# `conftest.undefs', that substitutes the proper values into
+# config.h.in to produce config.h. The first handles `#define'
+# templates, and the second `#undef' templates.
+# And first: Protect against being on the right side of a sed subst in
+# config.status. Protect against being in an unquoted here document
+# in config.status.
+rm -f conftest.defines conftest.undefs
+# Using a here document instead of a string reduces the quoting nightmare.
+# Putting comments in sed scripts is not portable.
+#
+# `end' is used to avoid that the second main sed command (meant for
+# 0-ary CPP macros) applies to n-ary macro definitions.
+# See the Autoconf documentation for `clear'.
+cat >confdef2sed.sed <<\_ACEOF
+s/[\\&,]/\\&/g
+s,[\\$`],\\&,g
+t clear
+: clear
+s,^[ ]*#[ ]*define[ ][ ]*\([^ (][^ (]*\)\(([^)]*)\)[ ]*\(.*\)$,${ac_dA}\1${ac_dB}\1\2${ac_dC}\3${ac_dD},gp
+t end
+s,^[ ]*#[ ]*define[ ][ ]*\([^ ][^ ]*\)[ ]*\(.*\)$,${ac_dA}\1${ac_dB}\1${ac_dC}\2${ac_dD},gp
+: end
+_ACEOF
+# If some macros were called several times there might be several times
+# the same #defines, which is useless. Nevertheless, we may not want to
+# sort them, since we want the *last* AC-DEFINE to be honored.
+uniq confdefs.h | sed -n -f confdef2sed.sed >conftest.defines
+sed 's/ac_d/ac_u/g' conftest.defines >conftest.undefs
+rm -f confdef2sed.sed
+
+# This sed command replaces #undef with comments. This is necessary, for
+# example, in the case of _POSIX_SOURCE, which is predefined and required
+# on some systems where configure will not decide to define it.
+cat >>conftest.undefs <<\_ACEOF
+s,^[ ]*#[ ]*undef[ ][ ]*[a-zA-Z_][a-zA-Z_0-9]*,/* & */,
+_ACEOF
+
+# Break up conftest.defines because some shells have a limit on the size
+# of here documents, and old seds have small limits too (100 cmds).
+echo ' # Handle all the #define templates only if necessary.' >>$CONFIG_STATUS
+echo ' if grep "^[ ]*#[ ]*define" $tmp/in >/dev/null; then' >>$CONFIG_STATUS
+echo ' # If there are no defines, we may have an empty if/fi' >>$CONFIG_STATUS
+echo ' :' >>$CONFIG_STATUS
+rm -f conftest.tail
+while grep . conftest.defines >/dev/null
+do
+ # Write a limited-size here document to $tmp/defines.sed.
+ echo ' cat >$tmp/defines.sed <<CEOF' >>$CONFIG_STATUS
+ # Speed up: don't consider the non `#define' lines.
+ echo '/^[ ]*#[ ]*define/!b' >>$CONFIG_STATUS
+ # Work around the forget-to-reset-the-flag bug.
+ echo 't clr' >>$CONFIG_STATUS
+ echo ': clr' >>$CONFIG_STATUS
+ sed ${ac_max_here_lines}q conftest.defines >>$CONFIG_STATUS
+ echo 'CEOF
+ sed -f $tmp/defines.sed $tmp/in >$tmp/out
+ rm -f $tmp/in
+ mv $tmp/out $tmp/in
+' >>$CONFIG_STATUS
+ sed 1,${ac_max_here_lines}d conftest.defines >conftest.tail
+ rm -f conftest.defines
+ mv conftest.tail conftest.defines
+done
+rm -f conftest.defines
+echo ' fi # grep' >>$CONFIG_STATUS
+echo >>$CONFIG_STATUS
+
+# Break up conftest.undefs because some shells have a limit on the size
+# of here documents, and old seds have small limits too (100 cmds).
+echo ' # Handle all the #undef templates' >>$CONFIG_STATUS
+rm -f conftest.tail
+while grep . conftest.undefs >/dev/null
+do
+ # Write a limited-size here document to $tmp/undefs.sed.
+ echo ' cat >$tmp/undefs.sed <<CEOF' >>$CONFIG_STATUS
+ # Speed up: don't consider the non `#undef'
+ echo '/^[ ]*#[ ]*undef/!b' >>$CONFIG_STATUS
+ # Work around the forget-to-reset-the-flag bug.
+ echo 't clr' >>$CONFIG_STATUS
+ echo ': clr' >>$CONFIG_STATUS
+ sed ${ac_max_here_lines}q conftest.undefs >>$CONFIG_STATUS
+ echo 'CEOF
+ sed -f $tmp/undefs.sed $tmp/in >$tmp/out
+ rm -f $tmp/in
+ mv $tmp/out $tmp/in
+' >>$CONFIG_STATUS
+ sed 1,${ac_max_here_lines}d conftest.undefs >conftest.tail
+ rm -f conftest.undefs
+ mv conftest.tail conftest.undefs
+done
+rm -f conftest.undefs
+
+cat >>$CONFIG_STATUS <<\_ACEOF
+ # Let's still pretend it is `configure' which instantiates (i.e., don't
+ # use $as_me), people would be surprised to read:
+ # /* config.h. Generated by config.status. */
+ if test x"$ac_file" = x-; then
+ echo "/* Generated by configure. */" >$tmp/config.h
+ else
+ echo "/* $ac_file. Generated by configure. */" >$tmp/config.h
+ fi
+ cat $tmp/in >>$tmp/config.h
+ rm -f $tmp/in
+ if test x"$ac_file" != x-; then
+ if diff $ac_file $tmp/config.h >/dev/null 2>&1; then
+ { echo "$as_me:$LINENO: $ac_file is unchanged" >&5
+echo "$as_me: $ac_file is unchanged" >&6;}
+ else
+ ac_dir=`(dirname "$ac_file") 2>/dev/null ||
+$as_expr X"$ac_file" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
+ X"$ac_file" : 'X\(//\)[^/]' \| \
+ X"$ac_file" : 'X\(//\)$' \| \
+ X"$ac_file" : 'X\(/\)' \| \
+ . : '\(.\)' 2>/dev/null ||
+echo X"$ac_file" |
+ sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/; q; }
+ /^X\(\/\/\)[^/].*/{ s//\1/; q; }
+ /^X\(\/\/\)$/{ s//\1/; q; }
+ /^X\(\/\).*/{ s//\1/; q; }
+ s/.*/./; q'`
+ { if $as_mkdir_p; then
+ mkdir -p "$ac_dir"
+ else
+ as_dir="$ac_dir"
+ as_dirs=
+ while test ! -d "$as_dir"; do
+ as_dirs="$as_dir $as_dirs"
+ as_dir=`(dirname "$as_dir") 2>/dev/null ||
+$as_expr X"$as_dir" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
+ X"$as_dir" : 'X\(//\)[^/]' \| \
+ X"$as_dir" : 'X\(//\)$' \| \
+ X"$as_dir" : 'X\(/\)' \| \
+ . : '\(.\)' 2>/dev/null ||
+echo X"$as_dir" |
+ sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/; q; }
+ /^X\(\/\/\)[^/].*/{ s//\1/; q; }
+ /^X\(\/\/\)$/{ s//\1/; q; }
+ /^X\(\/\).*/{ s//\1/; q; }
+ s/.*/./; q'`
+ done
+ test ! -n "$as_dirs" || mkdir $as_dirs
+ fi || { { echo "$as_me:$LINENO: error: cannot create directory \"$ac_dir\"" >&5
+echo "$as_me: error: cannot create directory \"$ac_dir\"" >&2;}
+ { (exit 1); exit 1; }; }; }
+
+ rm -f $ac_file
+ mv $tmp/config.h $ac_file
+ fi
+ else
+ cat $tmp/config.h
+ rm -f $tmp/config.h
+ fi
+ # Run the commands associated with the file.
+ case $ac_file in
+ config.h ) echo timestamp > stamp-h1 ;;
+ esac
+done
+_ACEOF
+cat >>$CONFIG_STATUS <<\_ACEOF
+
+#
+# CONFIG_COMMANDS section.
+#
+for ac_file in : $CONFIG_COMMANDS; do test "x$ac_file" = x: && continue
+ ac_dest=`echo "$ac_file" | sed 's,:.*,,'`
+ ac_source=`echo "$ac_file" | sed 's,[^:]*:,,'`
+ ac_dir=`(dirname "$ac_dest") 2>/dev/null ||
+$as_expr X"$ac_dest" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
+ X"$ac_dest" : 'X\(//\)[^/]' \| \
+ X"$ac_dest" : 'X\(//\)$' \| \
+ X"$ac_dest" : 'X\(/\)' \| \
+ . : '\(.\)' 2>/dev/null ||
+echo X"$ac_dest" |
+ sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/; q; }
+ /^X\(\/\/\)[^/].*/{ s//\1/; q; }
+ /^X\(\/\/\)$/{ s//\1/; q; }
+ /^X\(\/\).*/{ s//\1/; q; }
+ s/.*/./; q'`
+ { if $as_mkdir_p; then
+ mkdir -p "$ac_dir"
+ else
+ as_dir="$ac_dir"
+ as_dirs=
+ while test ! -d "$as_dir"; do
+ as_dirs="$as_dir $as_dirs"
+ as_dir=`(dirname "$as_dir") 2>/dev/null ||
+$as_expr X"$as_dir" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
+ X"$as_dir" : 'X\(//\)[^/]' \| \
+ X"$as_dir" : 'X\(//\)$' \| \
+ X"$as_dir" : 'X\(/\)' \| \
+ . : '\(.\)' 2>/dev/null ||
+echo X"$as_dir" |
+ sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/; q; }
+ /^X\(\/\/\)[^/].*/{ s//\1/; q; }
+ /^X\(\/\/\)$/{ s//\1/; q; }
+ /^X\(\/\).*/{ s//\1/; q; }
+ s/.*/./; q'`
+ done
+ test ! -n "$as_dirs" || mkdir $as_dirs
+ fi || { { echo "$as_me:$LINENO: error: cannot create directory \"$ac_dir\"" >&5
+echo "$as_me: error: cannot create directory \"$ac_dir\"" >&2;}
+ { (exit 1); exit 1; }; }; }
+
+ ac_builddir=.
+
+if test "$ac_dir" != .; then
+ ac_dir_suffix=/`echo "$ac_dir" | sed 's,^\.[\\/],,'`
+ # A "../" for each directory in $ac_dir_suffix.
+ ac_top_builddir=`echo "$ac_dir_suffix" | sed 's,/[^\\/]*,../,g'`
+else
+ ac_dir_suffix= ac_top_builddir=
+fi
+
+case $srcdir in
+ .) # No --srcdir option. We are building in place.
+ ac_srcdir=.
+ if test -z "$ac_top_builddir"; then
+ ac_top_srcdir=.
+ else
+ ac_top_srcdir=`echo $ac_top_builddir | sed 's,/$,,'`
+ fi ;;
+ [\\/]* | ?:[\\/]* ) # Absolute path.
+ ac_srcdir=$srcdir$ac_dir_suffix;
+ ac_top_srcdir=$srcdir ;;
+ *) # Relative path.
+ ac_srcdir=$ac_top_builddir$srcdir$ac_dir_suffix
+ ac_top_srcdir=$ac_top_builddir$srcdir ;;
+esac
+
+# Do not use `cd foo && pwd` to compute absolute paths, because
+# the directories may not exist.
+case `pwd` in
+.) ac_abs_builddir="$ac_dir";;
+*)
+ case "$ac_dir" in
+ .) ac_abs_builddir=`pwd`;;
+ [\\/]* | ?:[\\/]* ) ac_abs_builddir="$ac_dir";;
+ *) ac_abs_builddir=`pwd`/"$ac_dir";;
+ esac;;
+esac
+case $ac_abs_builddir in
+.) ac_abs_top_builddir=${ac_top_builddir}.;;
+*)
+ case ${ac_top_builddir}. in
+ .) ac_abs_top_builddir=$ac_abs_builddir;;
+ [\\/]* | ?:[\\/]* ) ac_abs_top_builddir=${ac_top_builddir}.;;
+ *) ac_abs_top_builddir=$ac_abs_builddir/${ac_top_builddir}.;;
+ esac;;
+esac
+case $ac_abs_builddir in
+.) ac_abs_srcdir=$ac_srcdir;;
+*)
+ case $ac_srcdir in
+ .) ac_abs_srcdir=$ac_abs_builddir;;
+ [\\/]* | ?:[\\/]* ) ac_abs_srcdir=$ac_srcdir;;
+ *) ac_abs_srcdir=$ac_abs_builddir/$ac_srcdir;;
+ esac;;
+esac
+case $ac_abs_builddir in
+.) ac_abs_top_srcdir=$ac_top_srcdir;;
+*)
+ case $ac_top_srcdir in
+ .) ac_abs_top_srcdir=$ac_abs_builddir;;
+ [\\/]* | ?:[\\/]* ) ac_abs_top_srcdir=$ac_top_srcdir;;
+ *) ac_abs_top_srcdir=$ac_abs_builddir/$ac_top_srcdir;;
+ esac;;
+esac
+
+
+ { echo "$as_me:$LINENO: executing $ac_dest commands" >&5
+echo "$as_me: executing $ac_dest commands" >&6;}
+ case $ac_dest in
+ gstdint.h )
+if test "$GCC" = yes; then
+ echo "/* generated for " `$CC --version | sed 1q` "*/" > tmp-stdint.h
+else
+ echo "/* generated for $CC */" > tmp-stdint.h
+fi
+
+sed 's/^ *//' >> tmp-stdint.h <<EOF
+
+ #ifndef GCC_GENERATED_STDINT_H
+ #define GCC_GENERATED_STDINT_H 1
+
+ #include <sys/types.h>
+EOF
+
+if test "$acx_cv_header_stdint" != stdint.h; then
+ echo "#include <stddef.h>" >> tmp-stdint.h
+fi
+if test "$acx_cv_header_stdint" != stddef.h; then
+ echo "#include <$acx_cv_header_stdint>" >> tmp-stdint.h
+fi
+
+sed 's/^ *//' >> tmp-stdint.h <<EOF
+ /* glibc uses these symbols as guards to prevent redefinitions. */
+ #ifdef __int8_t_defined
+ #define _INT8_T
+ #define _INT16_T
+ #define _INT32_T
+ #endif
+ #ifdef __uint32_t_defined
+ #define _UINT32_T
+ #endif
+
+EOF
+
+# ----------------- done header, emit basic int types -------------
+if test "$acx_cv_header_stdint" = stddef.h; then
+ sed 's/^ *//' >> tmp-stdint.h <<EOF
+
+ #ifndef _UINT8_T
+ #define _UINT8_T
+ #ifndef __uint8_t_defined
+ #define __uint8_t_defined
+ typedef unsigned $acx_cv_type_int8_t uint8_t;
+ #endif
+ #endif
+
+ #ifndef _UINT16_T
+ #define _UINT16_T
+ #ifndef __uint16_t_defined
+ #define __uint16_t_defined
+ typedef unsigned $acx_cv_type_int16_t uint16_t;
+ #endif
+ #endif
+
+ #ifndef _UINT32_T
+ #define _UINT32_T
+ #ifndef __uint32_t_defined
+ #define __uint32_t_defined
+ typedef unsigned $acx_cv_type_int32_t uint32_t;
+ #endif
+ #endif
+
+ #ifndef _INT8_T
+ #define _INT8_T
+ #ifndef __int8_t_defined
+ #define __int8_t_defined
+ typedef $acx_cv_type_int8_t int8_t;
+ #endif
+ #endif
+
+ #ifndef _INT16_T
+ #define _INT16_T
+ #ifndef __int16_t_defined
+ #define __int16_t_defined
+ typedef $acx_cv_type_int16_t int16_t;
+ #endif
+ #endif
+
+ #ifndef _INT32_T
+ #define _INT32_T
+ #ifndef __int32_t_defined
+ #define __int32_t_defined
+ typedef $acx_cv_type_int32_t int32_t;
+ #endif
+ #endif
+EOF
+elif test "$ac_cv_type_u_int32_t" = yes; then
+ sed 's/^ *//' >> tmp-stdint.h <<EOF
+
+ /* int8_t int16_t int32_t defined by inet code, we do the u_intXX types */
+ #ifndef _INT8_T
+ #define _INT8_T
+ #endif
+ #ifndef _INT16_T
+ #define _INT16_T
+ #endif
+ #ifndef _INT32_T
+ #define _INT32_T
+ #endif
+
+ #ifndef _UINT8_T
+ #define _UINT8_T
+ #ifndef __uint8_t_defined
+ #define __uint8_t_defined
+ typedef u_int8_t uint8_t;
+ #endif
+ #endif
+
+ #ifndef _UINT16_T
+ #define _UINT16_T
+ #ifndef __uint16_t_defined
+ #define __uint16_t_defined
+ typedef u_int16_t uint16_t;
+ #endif
+ #endif
+
+ #ifndef _UINT32_T
+ #define _UINT32_T
+ #ifndef __uint32_t_defined
+ #define __uint32_t_defined
+ typedef u_int32_t uint32_t;
+ #endif
+ #endif
+EOF
+else
+ sed 's/^ *//' >> tmp-stdint.h <<EOF
+
+ /* Some systems have guard macros to prevent redefinitions, define them. */
+ #ifndef _INT8_T
+ #define _INT8_T
+ #endif
+ #ifndef _INT16_T
+ #define _INT16_T
+ #endif
+ #ifndef _INT32_T
+ #define _INT32_T
+ #endif
+ #ifndef _UINT8_T
+ #define _UINT8_T
+ #endif
+ #ifndef _UINT16_T
+ #define _UINT16_T
+ #endif
+ #ifndef _UINT32_T
+ #define _UINT32_T
+ #endif
+EOF
+fi
+
+# ------------- done basic int types, emit int64_t types ------------
+if test "$ac_cv_type_uint64_t" = yes; then
+ sed 's/^ *//' >> tmp-stdint.h <<EOF
+
+ /* system headers have good uint64_t and int64_t */
+ #ifndef _INT64_T
+ #define _INT64_T
+ #endif
+ #ifndef _UINT64_T
+ #define _UINT64_T
+ #endif
+EOF
+elif test "$ac_cv_type_u_int64_t" = yes; then
+ sed 's/^ *//' >> tmp-stdint.h <<EOF
+
+ /* system headers have an u_int64_t (and int64_t) */
+ #ifndef _INT64_T
+ #define _INT64_T
+ #endif
+ #ifndef _UINT64_T
+ #define _UINT64_T
+ #ifndef __uint64_t_defined
+ #define __uint64_t_defined
+ typedef u_int64_t uint64_t;
+ #endif
+ #endif
+EOF
+elif test -n "$acx_cv_type_int64_t"; then
+ sed 's/^ *//' >> tmp-stdint.h <<EOF
+
+ /* architecture has a 64-bit type, $acx_cv_type_int64_t */
+ #ifndef _INT64_T
+ #define _INT64_T
+ typedef $acx_cv_type_int64_t int64_t;
+ #endif
+ #ifndef _UINT64_T
+ #define _UINT64_T
+ #ifndef __uint64_t_defined
+ #define __uint64_t_defined
+ typedef unsigned $acx_cv_type_int64_t uint64_t;
+ #endif
+ #endif
+EOF
+else
+ sed 's/^ *//' >> tmp-stdint.h <<EOF
+
+ /* some common heuristics for int64_t, using compiler-specific tests */
+ #if defined __STDC_VERSION__ && (__STDC_VERSION__-0) >= 199901L
+ #ifndef _INT64_T
+ #define _INT64_T
+ #ifndef __int64_t_defined
+ typedef long long int64_t;
+ #endif
+ #endif
+ #ifndef _UINT64_T
+ #define _UINT64_T
+ typedef unsigned long long uint64_t;
+ #endif
+
+ #elif defined __GNUC__ && defined (__STDC__) && __STDC__-0
+ /* NextStep 2.0 cc is really gcc 1.93 but it defines __GNUC__ = 2 and
+ does not implement __extension__. But that compiler doesn't define
+ __GNUC_MINOR__. */
+ # if __GNUC__ < 2 || (__NeXT__ && !__GNUC_MINOR__)
+ # define __extension__
+ # endif
+
+ # ifndef _INT64_T
+ # define _INT64_T
+ __extension__ typedef long long int64_t;
+ # endif
+ # ifndef _UINT64_T
+ # define _UINT64_T
+ __extension__ typedef unsigned long long uint64_t;
+ # endif
+
+ #elif !defined __STRICT_ANSI__
+ # if defined _MSC_VER || defined __WATCOMC__ || defined __BORLANDC__
+
+ # ifndef _INT64_T
+ # define _INT64_T
+ typedef __int64 int64_t;
+ # endif
+ # ifndef _UINT64_T
+ # define _UINT64_T
+ typedef unsigned __int64 uint64_t;
+ # endif
+ # endif /* compiler */
+
+ #endif /* ANSI version */
+EOF
+fi
+
+# ------------- done int64_t types, emit intptr types ------------
+if test "$ac_cv_type_uintptr_t" != yes; then
+ sed 's/^ *//' >> tmp-stdint.h <<EOF
+
+ /* Define intptr_t based on sizeof(void*) = $ac_cv_sizeof_void_p */
+ #ifndef __uintptr_t_defined
+ typedef u$acx_cv_type_intptr_t uintptr_t;
+ #endif
+ #ifndef __intptr_t_defined
+ typedef $acx_cv_type_intptr_t intptr_t;
+ #endif
+EOF
+fi
+
+# ------------- done intptr types, emit int_least types ------------
+if test "$ac_cv_type_int_least32_t" != yes; then
+ sed 's/^ *//' >> tmp-stdint.h <<EOF
+
+ /* Define int_least types */
+ typedef int8_t int_least8_t;
+ typedef int16_t int_least16_t;
+ typedef int32_t int_least32_t;
+ #ifdef _INT64_T
+ typedef int64_t int_least64_t;
+ #endif
+
+ typedef uint8_t uint_least8_t;
+ typedef uint16_t uint_least16_t;
+ typedef uint32_t uint_least32_t;
+ #ifdef _UINT64_T
+ typedef uint64_t uint_least64_t;
+ #endif
+EOF
+fi
+
+# ------------- done intptr types, emit int_fast types ------------
+if test "$ac_cv_type_int_fast32_t" != yes; then
+ sed 's/^ *//' >> tmp-stdint.h <<EOF
+
+ /* Define int_fast types. short is often slow */
+ typedef int8_t int_fast8_t;
+ typedef int int_fast16_t;
+ typedef int32_t int_fast32_t;
+ #ifdef _INT64_T
+ typedef int64_t int_fast64_t;
+ #endif
+
+ typedef uint8_t uint_fast8_t;
+ typedef unsigned int uint_fast16_t;
+ typedef uint32_t uint_fast32_t;
+ #ifdef _UINT64_T
+ typedef uint64_t uint_fast64_t;
+ #endif
+EOF
+fi
+
+if test "$ac_cv_type_uintmax_t" != yes; then
+ sed 's/^ *//' >> tmp-stdint.h <<EOF
+
+ /* Define intmax based on what we found */
+ #ifdef _INT64_T
+ typedef int64_t intmax_t;
+ #else
+ typedef long intmax_t;
+ #endif
+ #ifdef _UINT64_T
+ typedef uint64_t uintmax_t;
+ #else
+ typedef unsigned long uintmax_t;
+ #endif
+EOF
+fi
+
+sed 's/^ *//' >> tmp-stdint.h <<EOF
+
+ #endif /* GCC_GENERATED_STDINT_H */
+EOF
+
+if test -r gstdint.h && cmp -s tmp-stdint.h gstdint.h; then
+ rm -f tmp-stdint.h
+else
+ mv -f tmp-stdint.h gstdint.h
+fi
+
+ ;;
+ esac
+done
+_ACEOF
+
+cat >>$CONFIG_STATUS <<\_ACEOF
+
+{ (exit 0); exit 0; }
+_ACEOF
+chmod +x $CONFIG_STATUS
+ac_clean_files=$ac_clean_files_save
+
+
+# configure is writing to config.log, and then calls config.status.
+# config.status does its own redirection, appending to config.log.
+# Unfortunately, on DOS this fails, as config.log is still kept open
+# by configure, so config.status won't be able to write to it; its
+# output is simply discarded. So we exec the FD to /dev/null,
+# effectively closing config.log, so it can be properly (re)opened and
+# appended to by config.status. When coming back to configure, we
+# need to make the FD available again.
+if test "$no_create" != yes; then
+ ac_cs_success=:
+ ac_config_status_args=
+ test "$silent" = yes &&
+ ac_config_status_args="$ac_config_status_args --quiet"
+ exec 5>/dev/null
+ $SHELL $CONFIG_STATUS $ac_config_status_args || ac_cs_success=false
+ exec 5>>config.log
+ # Use ||, not &&, to avoid exiting from the if with $? = 1, which
+ # would make configure fail if this is the last instruction.
+ $ac_cs_success || { (exit 1); exit 1; }
+fi
+
diff --git a/libdecnumber/configure.ac b/libdecnumber/configure.ac
new file mode 100644
index 0000000..2a30707
--- /dev/null
+++ b/libdecnumber/configure.ac
@@ -0,0 +1,125 @@
+# configure.ac for libdecnumber -*- Autoconf -*-
+# Process this file with autoconf to generate a configuration script.
+
+# Copyright 2005, 2006 Free Software Foundation, Inc.
+
+# This file is part of GCC.
+
+# GCC is free software; you can redistribute it and/or modify it under
+# the terms of the GNU General Public License as published by the Free
+# Software Foundation; either version 2, or (at your option) any
+# later #version.
+
+# GCC is distributed in the hope that it will be useful, but WITHOUT
+# ANY WARRANTY; without even the implied warranty of MERCHANTABILITY
+# or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public
+# License #for more details.
+
+# You should have received a copy of the GNU General Public License
+# along with GCC; see the file COPYING. If not, write to the Free
+# Software Foundation, 51 Franklin Street, Fifth Floor, Boston, MA
+# 02110-1301, USA.
+
+AC_PREREQ(2.59)
+AC_INIT(libdecnumber, [ ], gcc-bugs@gcc.gnu.org, libdecnumber)
+AC_CONFIG_SRCDIR(decNumber.h)
+AC_CONFIG_MACRO_DIR(../config)
+
+# Checks for programs.
+AC_PROG_MAKE_SET
+AC_PROG_CC
+AC_PROG_RANLIB
+
+MISSING=`cd $ac_aux_dir && ${PWDCMD-pwd}`/missing
+AC_CHECK_PROGS([ACLOCAL], [aclocal], [$MISSING aclocal])
+AC_CHECK_PROGS([AUTOCONF], [autoconf], [$MISSING autoconf])
+AC_CHECK_PROGS([AUTOHEADER], [autoheader], [$MISSING autoheader])
+
+# Figure out what compiler warnings we can enable.
+# See config/warnings.m4 for details.
+
+ACX_PROG_CC_WARNING_OPTS([-W -Wall -Wwrite-strings -Wstrict-prototypes \
+ -Wmissing-prototypes -Wold-style-definition \
+ -Wmissing-format-attribute -Wcast-qual])
+ACX_PROG_CC_WARNING_ALMOST_PEDANTIC([-Wno-long-long])
+
+# Only enable with --enable-werror-always until existing warnings are
+# corrected.
+ACX_PROG_CC_WARNINGS_ARE_ERRORS([manual])
+
+# Checks for header files.
+AC_CHECK_HEADERS(ctype.h stddef.h string.h stdio.h)
+GCC_HEADER_STDINT(gstdint.h)
+
+# Checks for typedefs, structures, and compiler characteristics.
+AC_C_CONST
+AC_TYPE_OFF_T
+AC_CHECK_SIZEOF(int)
+AC_CHECK_SIZEOF(long)
+
+# Checks for library functions.
+AC_HEADER_STDC
+
+AC_ARG_ENABLE(maintainer-mode,
+[ --enable-maintainer-mode enable rules only needed by maintainers],,
+enable_maintainer_mode=no)
+
+if test "x$enable_maintainer_mode" = xno; then
+ MAINT='#'
+else
+ MAINT=
+fi
+AC_SUBST(MAINT)
+
+AC_CANONICAL_TARGET
+
+# Default decimal format
+# If you change the defaults here, be sure to change them in the GCC directory also
+AC_MSG_CHECKING([for decimal floating point])
+AC_ARG_ENABLE(decimal-float,
+[ --enable-decimal-float={no,yes,bid,dpd}
+ enable decimal float extension to C. Selecting 'bid'
+ or 'dpd' choses which decimal floating point format
+ to use],
+[
+ case $enable_decimal_float in
+ yes | no | bid | dpd) ;;
+ *) AC_MSG_ERROR(['$enable_decimal_float' is an invalid value for --enable-decimal-float.
+Valid choices are 'yes', 'bid', 'dpd', and 'no'.]) ;;
+ esac
+],
+[
+ case $target in
+ powerpc*-*-linux* | i?86*-*-linux* | x86_64*-*-linux*)
+ enable_decimal_float=yes
+ ;;
+ *)
+ enable_decimal_float=no
+ ;;
+ esac
+])
+
+# x86's use BID format instead of DPD
+# In theory --enable-decimal-float=no should not compile anything
+# For the sake of simplicity, just use the default format in this directory
+if test x$enable_decimal_float = xyes -o x$enable_decimal_float = xno; then
+ case $target in
+ i?86*-*-linux* | x86_64*-*-linux*)
+ enable_decimal_float=bid
+ ;;
+ *)
+ enable_decimal_float=dpd
+ ;;
+ esac
+fi
+
+AC_MSG_RESULT($enable_decimal_float)
+AC_SUBST(enable_decimal_float)
+
+AC_C_BIGENDIAN
+
+# Output.
+
+AC_CONFIG_HEADERS(config.h:config.in, [echo timestamp > stamp-h1])
+AC_CONFIG_FILES(Makefile)
+AC_OUTPUT
diff --git a/libdecnumber/decBasic.c b/libdecnumber/decBasic.c
new file mode 100644
index 0000000..9ce277d
--- /dev/null
+++ b/libdecnumber/decBasic.c
@@ -0,0 +1,3769 @@
+/* Common base code for the decNumber C Library.
+ Copyright (C) 2007 Free Software Foundation, Inc.
+ Contributed by IBM Corporation. Author Mike Cowlishaw.
+
+ This file is part of GCC.
+
+ GCC is free software; you can redistribute it and/or modify it under
+ the terms of the GNU General Public License as published by the Free
+ Software Foundation; either version 2, or (at your option) any later
+ version.
+
+ In addition to the permissions in the GNU General Public License,
+ the Free Software Foundation gives you unlimited permission to link
+ the compiled version of this file into combinations with other
+ programs, and to distribute those combinations without any
+ restriction coming from the use of this file. (The General Public
+ License restrictions do apply in other respects; for example, they
+ cover modification of the file, and distribution when not linked
+ into a combine executable.)
+
+ GCC is distributed in the hope that it will be useful, but WITHOUT ANY
+ WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
+ for more details.
+
+ You should have received a copy of the GNU General Public License
+ along with GCC; see the file COPYING. If not, write to the Free
+ Software Foundation, 51 Franklin Street, Fifth Floor, Boston, MA
+ 02110-1301, USA. */
+
+/* ------------------------------------------------------------------ */
+/* decBasic.c -- common base code for Basic decimal types */
+/* ------------------------------------------------------------------ */
+/* This module comprises code that is shared between decDouble and */
+/* decQuad (but not decSingle). The main arithmetic operations are */
+/* here (Add, Subtract, Multiply, FMA, and Division operators). */
+/* */
+/* Unlike decNumber, parameterization takes place at compile time */
+/* rather than at runtime. The parameters are set in the decDouble.c */
+/* (etc.) files, which then include this one to produce the compiled */
+/* code. The functions here, therefore, are code shared between */
+/* multiple formats. */
+/* */
+/* This must be included after decCommon.c. */
+/* ------------------------------------------------------------------ */
+/* Names here refer to decFloat rather than to decDouble, etc., and */
+/* the functions are in strict alphabetical order. */
+
+/* The compile-time flags SINGLE, DOUBLE, and QUAD are set up in */
+/* decCommon.c */
+#if !defined(QUAD)
+ #error decBasic.c must be included after decCommon.c
+#endif
+#if SINGLE
+ #error Routines in decBasic.c are for decDouble and decQuad only
+#endif
+
+/* Private constants */
+#define DIVIDE 0x80000000 /* Divide operations [as flags] */
+#define REMAINDER 0x40000000 /* .. */
+#define DIVIDEINT 0x20000000 /* .. */
+#define REMNEAR 0x10000000 /* .. */
+
+/* Private functions (local, used only by routines in this module) */
+static decFloat *decDivide(decFloat *, const decFloat *,
+ const decFloat *, decContext *, uInt);
+static decFloat *decCanonical(decFloat *, const decFloat *);
+static void decFiniteMultiply(bcdnum *, uByte *, const decFloat *,
+ const decFloat *);
+static decFloat *decInfinity(decFloat *, const decFloat *);
+static decFloat *decInvalid(decFloat *, decContext *);
+static decFloat *decNaNs(decFloat *, const decFloat *, const decFloat *,
+ decContext *);
+static Int decNumCompare(const decFloat *, const decFloat *, Flag);
+static decFloat *decToIntegral(decFloat *, const decFloat *, decContext *,
+ enum rounding, Flag);
+static uInt decToInt32(const decFloat *, decContext *, enum rounding,
+ Flag, Flag);
+
+/* ------------------------------------------------------------------ */
+/* decCanonical -- copy a decFloat, making canonical */
+/* */
+/* result gets the canonicalized df */
+/* df is the decFloat to copy and make canonical */
+/* returns result */
+/* */
+/* This is exposed via decFloatCanonical for Double and Quad only. */
+/* This works on specials, too; no error or exception is possible. */
+/* ------------------------------------------------------------------ */
+static decFloat * decCanonical(decFloat *result, const decFloat *df) {
+ uInt encode, precode, dpd; /* work */
+ uInt inword, uoff, canon; /* .. */
+ Int n; /* counter (down) */
+ if (df!=result) *result=*df; /* effect copy if needed */
+ if (DFISSPECIAL(result)) {
+ if (DFISINF(result)) return decInfinity(result, df); /* clean Infinity */
+ /* is a NaN */
+ DFWORD(result, 0)&=~ECONNANMASK; /* clear ECON except selector */
+ if (DFISCCZERO(df)) return result; /* coefficient continuation is 0 */
+ /* drop through to check payload */
+ }
+ /* return quickly if the coefficient continuation is canonical */
+ { /* declare block */
+ #if DOUBLE
+ uInt sourhi=DFWORD(df, 0);
+ uInt sourlo=DFWORD(df, 1);
+ if (CANONDPDOFF(sourhi, 8)
+ && CANONDPDTWO(sourhi, sourlo, 30)
+ && CANONDPDOFF(sourlo, 20)
+ && CANONDPDOFF(sourlo, 10)
+ && CANONDPDOFF(sourlo, 0)) return result;
+ #elif QUAD
+ uInt sourhi=DFWORD(df, 0);
+ uInt sourmh=DFWORD(df, 1);
+ uInt sourml=DFWORD(df, 2);
+ uInt sourlo=DFWORD(df, 3);
+ if (CANONDPDOFF(sourhi, 4)
+ && CANONDPDTWO(sourhi, sourmh, 26)
+ && CANONDPDOFF(sourmh, 16)
+ && CANONDPDOFF(sourmh, 6)
+ && CANONDPDTWO(sourmh, sourml, 28)
+ && CANONDPDOFF(sourml, 18)
+ && CANONDPDOFF(sourml, 8)
+ && CANONDPDTWO(sourml, sourlo, 30)
+ && CANONDPDOFF(sourlo, 20)
+ && CANONDPDOFF(sourlo, 10)
+ && CANONDPDOFF(sourlo, 0)) return result;
+ #endif
+ } /* block */
+
+ /* Loop to repair a non-canonical coefficent, as needed */
+ inword=DECWORDS-1; /* current input word */
+ uoff=0; /* bit offset of declet */
+ encode=DFWORD(result, inword);
+ for (n=DECLETS-1; n>=0; n--) { /* count down declets of 10 bits */
+ dpd=encode>>uoff;
+ uoff+=10;
+ if (uoff>32) { /* crossed uInt boundary */
+ inword--;
+ encode=DFWORD(result, inword);
+ uoff-=32;
+ dpd|=encode<<(10-uoff); /* get pending bits */
+ }
+ dpd&=0x3ff; /* clear uninteresting bits */
+ if (dpd<0x16e) continue; /* must be canonical */
+ canon=BIN2DPD[DPD2BIN[dpd]]; /* determine canonical declet */
+ if (canon==dpd) continue; /* have canonical declet */
+ /* need to replace declet */
+ if (uoff>=10) { /* all within current word */
+ encode&=~(0x3ff<<(uoff-10)); /* clear the 10 bits ready for replace */
+ encode|=canon<<(uoff-10); /* insert the canonical form */
+ DFWORD(result, inword)=encode; /* .. and save */
+ continue;
+ }
+ /* straddled words */
+ precode=DFWORD(result, inword+1); /* get previous */
+ precode&=0xffffffff>>(10-uoff); /* clear top bits */
+ DFWORD(result, inword+1)=precode|(canon<<(32-(10-uoff)));
+ encode&=0xffffffff<<uoff; /* clear bottom bits */
+ encode|=canon>>(10-uoff); /* insert canonical */
+ DFWORD(result, inword)=encode; /* .. and save */
+ } /* n */
+ return result;
+ } /* decCanonical */
+
+/* ------------------------------------------------------------------ */
+/* decDivide -- divide operations */
+/* */
+/* result gets the result of dividing dfl by dfr: */
+/* dfl is the first decFloat (lhs) */
+/* dfr is the second decFloat (rhs) */
+/* set is the context */
+/* op is the operation selector */
+/* returns result */
+/* */
+/* op is one of DIVIDE, REMAINDER, DIVIDEINT, or REMNEAR. */
+/* ------------------------------------------------------------------ */
+#define DIVCOUNT 0 /* 1 to instrument subtractions counter */
+#define DIVBASE BILLION /* the base used for divide */
+#define DIVOPLEN DECPMAX9 /* operand length ('digits' base 10**9) */
+#define DIVACCLEN (DIVOPLEN*3) /* accumulator length (ditto) */
+static decFloat * decDivide(decFloat *result, const decFloat *dfl,
+ const decFloat *dfr, decContext *set, uInt op) {
+ decFloat quotient; /* for remainders */
+ bcdnum num; /* for final conversion */
+ uInt acc[DIVACCLEN]; /* coefficent in base-billion .. */
+ uInt div[DIVOPLEN]; /* divisor in base-billion .. */
+ uInt quo[DIVOPLEN+1]; /* quotient in base-billion .. */
+ uByte bcdacc[(DIVOPLEN+1)*9+2]; /* for quotient in BCD, +1, +1 */
+ uInt *msua, *msud, *msuq; /* -> msu of acc, div, and quo */
+ Int divunits, accunits; /* lengths */
+ Int quodigits; /* digits in quotient */
+ uInt *lsua, *lsuq; /* -> current acc and quo lsus */
+ Int length, multiplier; /* work */
+ uInt carry, sign; /* .. */
+ uInt *ua, *ud, *uq; /* .. */
+ uByte *ub; /* .. */
+ uInt divtop; /* top unit of div adjusted for estimating */
+ #if DIVCOUNT
+ static uInt maxcount=0; /* worst-seen subtractions count */
+ uInt divcount=0; /* subtractions count [this divide] */
+ #endif
+
+ /* calculate sign */
+ num.sign=(DFWORD(dfl, 0)^DFWORD(dfr, 0)) & DECFLOAT_Sign;
+
+ if (DFISSPECIAL(dfl) || DFISSPECIAL(dfr)) { /* either is special? */
+ /* NaNs are handled as usual */
+ if (DFISNAN(dfl) || DFISNAN(dfr)) return decNaNs(result, dfl, dfr, set);
+ /* one or two infinities */
+ if (DFISINF(dfl)) {
+ if (DFISINF(dfr)) return decInvalid(result, set); /* Two infinities bad */
+ if (op&(REMAINDER|REMNEAR)) return decInvalid(result, set); /* as is rem */
+ /* Infinity/x is infinite and quiet, even if x=0 */
+ DFWORD(result, 0)=num.sign;
+ return decInfinity(result, result);
+ }
+ /* must be x/Infinity -- remainders are lhs */
+ if (op&(REMAINDER|REMNEAR)) return decCanonical(result, dfl);
+ /* divides: return zero with correct sign and exponent depending */
+ /* on op (Etiny for divide, 0 for divideInt) */
+ decFloatZero(result);
+ if (op==DIVIDEINT) DFWORD(result, 0)|=num.sign; /* add sign */
+ else DFWORD(result, 0)=num.sign; /* zeros the exponent, too */
+ return result;
+ }
+ /* next, handle zero operands (x/0 and 0/x) */
+ if (DFISZERO(dfr)) { /* x/0 */
+ if (DFISZERO(dfl)) { /* 0/0 is undefined */
+ decFloatZero(result);
+ DFWORD(result, 0)=DECFLOAT_qNaN;
+ set->status|=DEC_Division_undefined;
+ return result;
+ }
+ if (op&(REMAINDER|REMNEAR)) return decInvalid(result, set); /* bad rem */
+ set->status|=DEC_Division_by_zero;
+ DFWORD(result, 0)=num.sign;
+ return decInfinity(result, result); /* x/0 -> signed Infinity */
+ }
+ num.exponent=GETEXPUN(dfl)-GETEXPUN(dfr); /* ideal exponent */
+ if (DFISZERO(dfl)) { /* 0/x (x!=0) */
+ /* if divide, result is 0 with ideal exponent; divideInt has */
+ /* exponent=0, remainders give zero with lower exponent */
+ if (op&DIVIDEINT) {
+ decFloatZero(result);
+ DFWORD(result, 0)|=num.sign; /* add sign */
+ return result;
+ }
+ if (!(op&DIVIDE)) { /* a remainder */
+ /* exponent is the minimum of the operands */
+ num.exponent=MINI(GETEXPUN(dfl), GETEXPUN(dfr));
+ /* if the result is zero the sign shall be sign of dfl */
+ num.sign=DFWORD(dfl, 0)&DECFLOAT_Sign;
+ }
+ bcdacc[0]=0;
+ num.msd=bcdacc; /* -> 0 */
+ num.lsd=bcdacc; /* .. */
+ return decFinalize(result, &num, set); /* [divide may clamp exponent] */
+ } /* 0/x */
+ /* [here, both operands are known to be finite and non-zero] */
+
+ /* extract the operand coefficents into 'units' which are */
+ /* base-billion; the lhs is high-aligned in acc and the msu of both */
+ /* acc and div is at the right-hand end of array (offset length-1); */
+ /* the quotient can need one more unit than the operands as digits */
+ /* in it are not necessarily aligned neatly; further, the quotient */
+ /* may not start accumulating until after the end of the initial */
+ /* operand in acc if that is small (e.g., 1) so the accumulator */
+ /* must have at least that number of units extra (at the ls end) */
+ GETCOEFFBILL(dfl, acc+DIVACCLEN-DIVOPLEN);
+ GETCOEFFBILL(dfr, div);
+ /* zero the low uInts of acc */
+ acc[0]=0;
+ acc[1]=0;
+ acc[2]=0;
+ acc[3]=0;
+ #if DOUBLE
+ #if DIVOPLEN!=2
+ #error Unexpected Double DIVOPLEN
+ #endif
+ #elif QUAD
+ acc[4]=0;
+ acc[5]=0;
+ acc[6]=0;
+ acc[7]=0;
+ #if DIVOPLEN!=4
+ #error Unexpected Quad DIVOPLEN
+ #endif
+ #endif
+
+ /* set msu and lsu pointers */
+ msua=acc+DIVACCLEN-1; /* [leading zeros removed below] */
+ msuq=quo+DIVOPLEN;
+ /*[loop for div will terminate because operands are non-zero] */
+ for (msud=div+DIVOPLEN-1; *msud==0;) msud--;
+ /* the initial least-significant unit of acc is set so acc appears */
+ /* to have the same length as div. */
+ /* This moves one position towards the least possible for each */
+ /* iteration */
+ divunits=(Int)(msud-div+1); /* precalculate */
+ lsua=msua-divunits+1; /* initial working lsu of acc */
+ lsuq=msuq; /* and of quo */
+
+ /* set up the estimator for the multiplier; this is the msu of div, */
+ /* plus two bits from the unit below (if any) rounded up by one if */
+ /* there are any non-zero bits or units below that [the extra two */
+ /* bits makes for a much better estimate when the top unit is small] */
+ divtop=*msud<<2;
+ if (divunits>1) {
+ uInt *um=msud-1;
+ uInt d=*um;
+ if (d>=750000000) {divtop+=3; d-=750000000;}
+ else if (d>=500000000) {divtop+=2; d-=500000000;}
+ else if (d>=250000000) {divtop++; d-=250000000;}
+ if (d) divtop++;
+ else for (um--; um>=div; um--) if (*um) {
+ divtop++;
+ break;
+ }
+ } /* >1 unit */
+
+ #if DECTRACE
+ {Int i;
+ printf("----- div=");
+ for (i=divunits-1; i>=0; i--) printf("%09ld ", (LI)div[i]);
+ printf("\n");}
+ #endif
+
+ /* now collect up to DECPMAX+1 digits in the quotient (this may */
+ /* need OPLEN+1 uInts if unaligned) */
+ quodigits=0; /* no digits yet */
+ for (;; lsua--) { /* outer loop -- each input position */
+ #if DECCHECK
+ if (lsua<acc) {
+ printf("Acc underrun...\n");
+ break;
+ }
+ #endif
+ #if DECTRACE
+ printf("Outer: quodigits=%ld acc=", (LI)quodigits);
+ for (ua=msua; ua>=lsua; ua--) printf("%09ld ", (LI)*ua);
+ printf("\n");
+ #endif
+ *lsuq=0; /* default unit result is 0 */
+ for (;;) { /* inner loop -- calculate quotient unit */
+ /* strip leading zero units from acc (either there initially or */
+ /* from subtraction below); this may strip all if exactly 0 */
+ for (; *msua==0 && msua>=lsua;) msua--;
+ accunits=(Int)(msua-lsua+1); /* [maybe 0] */
+ /* subtraction is only necessary and possible if there are as */
+ /* least as many units remaining in acc for this iteration as */
+ /* there are in div */
+ if (accunits<divunits) {
+ if (accunits==0) msua++; /* restore */
+ break;
+ }
+
+ /* If acc is longer than div then subtraction is definitely */
+ /* possible (as msu of both is non-zero), but if they are the */
+ /* same length a comparison is needed. */
+ /* If a subtraction is needed then a good estimate of the */
+ /* multiplier for the subtraction is also needed in order to */
+ /* minimise the iterations of this inner loop because the */
+ /* subtractions needed dominate division performance. */
+ if (accunits==divunits) {
+ /* compare the high divunits of acc and div: */
+ /* acc<div: this quotient unit is unchanged; subtraction */
+ /* will be possible on the next iteration */
+ /* acc==div: quotient gains 1, set acc=0 */
+ /* acc>div: subtraction necessary at this position */
+ for (ud=msud, ua=msua; ud>div; ud--, ua--) if (*ud!=*ua) break;
+ /* [now at first mismatch or lsu] */
+ if (*ud>*ua) break; /* next time... */
+ if (*ud==*ua) { /* all compared equal */
+ *lsuq+=1; /* increment result */
+ msua=lsua; /* collapse acc units */
+ *msua=0; /* .. to a zero */
+ break;
+ }
+
+ /* subtraction necessary; estimate multiplier [see above] */
+ /* if both *msud and *msua are small it is cost-effective to */
+ /* bring in part of the following units (if any) to get a */
+ /* better estimate (assume some other non-zero in div) */
+ #define DIVLO 1000000U
+ #define DIVHI (DIVBASE/DIVLO)
+ #if DECUSE64
+ if (divunits>1) {
+ /* there cannot be a *(msud-2) for DECDOUBLE so next is */
+ /* an exact calculation unless DECQUAD (which needs to */
+ /* assume bits out there if divunits>2) */
+ uLong mul=(uLong)*msua * DIVBASE + *(msua-1);
+ uLong div=(uLong)*msud * DIVBASE + *(msud-1);
+ #if QUAD
+ if (divunits>2) div++;
+ #endif
+ mul/=div;
+ multiplier=(Int)mul;
+ }
+ else multiplier=*msua/(*msud);
+ #else
+ if (divunits>1 && *msua<DIVLO && *msud<DIVLO) {
+ multiplier=(*msua*DIVHI + *(msua-1)/DIVLO)
+ /(*msud*DIVHI + *(msud-1)/DIVLO +1);
+ }
+ else multiplier=(*msua<<2)/divtop;
+ #endif
+ }
+ else { /* accunits>divunits */
+ /* msud is one unit 'lower' than msua, so estimate differently */
+ #if DECUSE64
+ uLong mul;
+ /* as before, bring in extra digits if possible */
+ if (divunits>1 && *msua<DIVLO && *msud<DIVLO) {
+ mul=((uLong)*msua * DIVHI * DIVBASE) + *(msua-1) * DIVHI
+ + *(msua-2)/DIVLO;
+ mul/=(*msud*DIVHI + *(msud-1)/DIVLO +1);
+ }
+ else if (divunits==1) {
+ mul=(uLong)*msua * DIVBASE + *(msua-1);
+ mul/=*msud; /* no more to the right */
+ }
+ else {
+ mul=(uLong)(*msua) * (uInt)(DIVBASE<<2) + (*(msua-1)<<2);
+ mul/=divtop; /* [divtop already allows for sticky bits] */
+ }
+ multiplier=(Int)mul;
+ #else
+ multiplier=*msua * ((DIVBASE<<2)/divtop);
+ #endif
+ }
+ if (multiplier==0) multiplier=1; /* marginal case */
+ *lsuq+=multiplier;
+
+ #if DIVCOUNT
+ /* printf("Multiplier: %ld\n", (LI)multiplier); */
+ divcount++;
+ #endif
+
+ /* Carry out the subtraction acc-(div*multiplier); for each */
+ /* unit in div, do the multiply, split to units (see */
+ /* decFloatMultiply for the algorithm), and subtract from acc */
+ #define DIVMAGIC 2305843009U /* 2**61/10**9 */
+ #define DIVSHIFTA 29
+ #define DIVSHIFTB 32
+ carry=0;
+ for (ud=div, ua=lsua; ud<=msud; ud++, ua++) {
+ uInt lo, hop;
+ #if DECUSE64
+ uLong sub=(uLong)multiplier*(*ud)+carry;
+ if (sub<DIVBASE) {
+ carry=0;
+ lo=(uInt)sub;
+ }
+ else {
+ hop=(uInt)(sub>>DIVSHIFTA);
+ carry=(uInt)(((uLong)hop*DIVMAGIC)>>DIVSHIFTB);
+ /* the estimate is now in hi; now calculate sub-hi*10**9 */
+ /* to get the remainder (which will be <DIVBASE)) */
+ lo=(uInt)sub;
+ lo-=carry*DIVBASE; /* low word of result */
+ if (lo>=DIVBASE) {
+ lo-=DIVBASE; /* correct by +1 */
+ carry++;
+ }
+ }
+ #else /* 32-bit */
+ uInt hi;
+ /* calculate multiplier*(*ud) into hi and lo */
+ LONGMUL32HI(hi, *ud, multiplier); /* get the high word */
+ lo=multiplier*(*ud); /* .. and the low */
+ lo+=carry; /* add the old hi */
+ carry=hi+(lo<carry); /* .. with any carry */
+ if (carry || lo>=DIVBASE) { /* split is needed */
+ hop=(carry<<3)+(lo>>DIVSHIFTA); /* hi:lo/2**29 */
+ LONGMUL32HI(carry, hop, DIVMAGIC); /* only need the high word */
+ /* [DIVSHIFTB is 32, so carry can be used directly] */
+ /* the estimate is now in carry; now calculate hi:lo-est*10**9; */
+ /* happily the top word of the result is irrelevant because it */
+ /* will always be zero so this needs only one multiplication */
+ lo-=(carry*DIVBASE);
+ /* the correction here will be at most +1; do it */
+ if (lo>=DIVBASE) {
+ lo-=DIVBASE;
+ carry++;
+ }
+ }
+ #endif
+ if (lo>*ua) { /* borrow needed */
+ *ua+=DIVBASE;
+ carry++;
+ }
+ *ua-=lo;
+ } /* ud loop */
+ if (carry) *ua-=carry; /* accdigits>divdigits [cannot borrow] */
+ } /* inner loop */
+
+ /* the outer loop terminates when there is either an exact result */
+ /* or enough digits; first update the quotient digit count and */
+ /* pointer (if any significant digits) */
+ #if DECTRACE
+ if (*lsuq || quodigits) printf("*lsuq=%09ld\n", (LI)*lsuq);
+ #endif
+ if (quodigits) {
+ quodigits+=9; /* had leading unit earlier */
+ lsuq--;
+ if (quodigits>DECPMAX+1) break; /* have enough */
+ }
+ else if (*lsuq) { /* first quotient digits */
+ const uInt *pow;
+ for (pow=DECPOWERS; *lsuq>=*pow; pow++) quodigits++;
+ lsuq--;
+ /* [cannot have >DECPMAX+1 on first unit] */
+ }
+
+ if (*msua!=0) continue; /* not an exact result */
+ /* acc is zero iff used all of original units and zero down to lsua */
+ /* (must also continue to original lsu for correct quotient length) */
+ if (lsua>acc+DIVACCLEN-DIVOPLEN) continue;
+ for (; msua>lsua && *msua==0;) msua--;
+ if (*msua==0 && msua==lsua) break;
+ } /* outer loop */
+
+ /* all of the original operand in acc has been covered at this point */
+ /* quotient now has at least DECPMAX+2 digits */
+ /* *msua is now non-0 if inexact and sticky bits */
+ /* lsuq is one below the last uint of the quotient */
+ lsuq++; /* set -> true lsu of quo */
+ if (*msua) *lsuq|=1; /* apply sticky bit */
+
+ /* quo now holds the (unrounded) quotient in base-billion; one */
+ /* base-billion 'digit' per uInt. */
+ #if DECTRACE
+ printf("DivQuo:");
+ for (uq=msuq; uq>=lsuq; uq--) printf(" %09ld", (LI)*uq);
+ printf("\n");
+ #endif
+
+ /* Now convert to BCD for rounding and cleanup, starting from the */
+ /* most significant end [offset by one into bcdacc to leave room */
+ /* for a possible carry digit if rounding for REMNEAR is needed] */
+ for (uq=msuq, ub=bcdacc+1; uq>=lsuq; uq--, ub+=9) {
+ uInt top, mid, rem; /* work */
+ if (*uq==0) { /* no split needed */
+ UINTAT(ub)=0; /* clear 9 BCD8s */
+ UINTAT(ub+4)=0; /* .. */
+ *(ub+8)=0; /* .. */
+ continue;
+ }
+ /* *uq is non-zero -- split the base-billion digit into */
+ /* hi, mid, and low three-digits */
+ #define divsplit9 1000000 /* divisor */
+ #define divsplit6 1000 /* divisor */
+ /* The splitting is done by simple divides and remainders, */
+ /* assuming the compiler will optimize these [GCC does] */
+ top=*uq/divsplit9;
+ rem=*uq%divsplit9;
+ mid=rem/divsplit6;
+ rem=rem%divsplit6;
+ /* lay out the nine BCD digits (plus one unwanted byte) */
+ UINTAT(ub) =UINTAT(&BIN2BCD8[top*4]);
+ UINTAT(ub+3)=UINTAT(&BIN2BCD8[mid*4]);
+ UINTAT(ub+6)=UINTAT(&BIN2BCD8[rem*4]);
+ } /* BCD conversion loop */
+ ub--; /* -> lsu */
+
+ /* complete the bcdnum; quodigits is correct, so the position of */
+ /* the first non-zero is known */
+ num.msd=bcdacc+1+(msuq-lsuq+1)*9-quodigits;
+ num.lsd=ub;
+
+ /* make exponent adjustments, etc */
+ if (lsua<acc+DIVACCLEN-DIVOPLEN) { /* used extra digits */
+ num.exponent-=(Int)((acc+DIVACCLEN-DIVOPLEN-lsua)*9);
+ /* if the result was exact then there may be up to 8 extra */
+ /* trailing zeros in the overflowed quotient final unit */
+ if (*msua==0) {
+ for (; *ub==0;) ub--; /* drop zeros */
+ num.exponent+=(Int)(num.lsd-ub); /* and adjust exponent */
+ num.lsd=ub;
+ }
+ } /* adjustment needed */
+
+ #if DIVCOUNT
+ if (divcount>maxcount) { /* new high-water nark */
+ maxcount=divcount;
+ printf("DivNewMaxCount: %ld\n", (LI)maxcount);
+ }
+ #endif
+
+ if (op&DIVIDE) return decFinalize(result, &num, set); /* all done */
+
+ /* Is DIVIDEINT or a remainder; there is more to do -- first form */
+ /* the integer (this is done 'after the fact', unlike as in */
+ /* decNumber, so as not to tax DIVIDE) */
+
+ /* The first non-zero digit will be in the first 9 digits, known */
+ /* from quodigits and num.msd, so there is always space for DECPMAX */
+ /* digits */
+
+ length=(Int)(num.lsd-num.msd+1);
+ /*printf("Length exp: %ld %ld\n", (LI)length, (LI)num.exponent); */
+
+ if (length+num.exponent>DECPMAX) { /* cannot fit */
+ decFloatZero(result);
+ DFWORD(result, 0)=DECFLOAT_qNaN;
+ set->status|=DEC_Division_impossible;
+ return result;
+ }
+
+ if (num.exponent>=0) { /* already an int, or need pad zeros */
+ for (ub=num.lsd+1; ub<=num.lsd+num.exponent; ub++) *ub=0;
+ num.lsd+=num.exponent;
+ }
+ else { /* too long: round or truncate needed */
+ Int drop=-num.exponent;
+ if (!(op&REMNEAR)) { /* simple truncate */
+ num.lsd-=drop;
+ if (num.lsd<num.msd) { /* truncated all */
+ num.lsd=num.msd; /* make 0 */
+ *num.lsd=0; /* .. [sign still relevant] */
+ }
+ }
+ else { /* round to nearest even [sigh] */
+ /* round-to-nearest, in-place; msd is at or to right of bcdacc+1 */
+ /* (this is a special case of Quantize -- q.v. for commentary) */
+ uByte *roundat; /* -> re-round digit */
+ uByte reround; /* reround value */
+ *(num.msd-1)=0; /* in case of left carry, or make 0 */
+ if (drop<length) roundat=num.lsd-drop+1;
+ else if (drop==length) roundat=num.msd;
+ else roundat=num.msd-1; /* [-> 0] */
+ reround=*roundat;
+ for (ub=roundat+1; ub<=num.lsd; ub++) {
+ if (*ub!=0) {
+ reround=DECSTICKYTAB[reround];
+ break;
+ }
+ } /* check stickies */
+ if (roundat>num.msd) num.lsd=roundat-1;
+ else {
+ num.msd--; /* use the 0 .. */
+ num.lsd=num.msd; /* .. at the new MSD place */
+ }
+ if (reround!=0) { /* discarding non-zero */
+ uInt bump=0;
+ /* rounding is DEC_ROUND_HALF_EVEN always */
+ if (reround>5) bump=1; /* >0.5 goes up */
+ else if (reround==5) /* exactly 0.5000 .. */
+ bump=*(num.lsd) & 0x01; /* .. up iff [new] lsd is odd */
+ if (bump!=0) { /* need increment */
+ /* increment the coefficient; this might end up with 1000... */
+ ub=num.lsd;
+ for (; UINTAT(ub-3)==0x09090909; ub-=4) UINTAT(ub-3)=0;
+ for (; *ub==9; ub--) *ub=0; /* at most 3 more */
+ *ub+=1;
+ if (ub<num.msd) num.msd--; /* carried */
+ } /* bump needed */
+ } /* reround!=0 */
+ } /* remnear */
+ } /* round or truncate needed */
+ num.exponent=0; /* all paths */
+ /*decShowNum(&num, "int"); */
+
+ if (op&DIVIDEINT) return decFinalize(result, &num, set); /* all done */
+
+ /* Have a remainder to calculate */
+ decFinalize(&quotient, &num, set); /* lay out the integer so far */
+ DFWORD(&quotient, 0)^=DECFLOAT_Sign; /* negate it */
+ sign=DFWORD(dfl, 0); /* save sign of dfl */
+ decFloatFMA(result, &quotient, dfr, dfl, set);
+ if (!DFISZERO(result)) return result;
+ /* if the result is zero the sign shall be sign of dfl */
+ DFWORD(&quotient, 0)=sign; /* construct decFloat of sign */
+ return decFloatCopySign(result, result, &quotient);
+ } /* decDivide */
+
+/* ------------------------------------------------------------------ */
+/* decFiniteMultiply -- multiply two finite decFloats */
+/* */
+/* num gets the result of multiplying dfl and dfr */
+/* bcdacc .. with the coefficient in this array */
+/* dfl is the first decFloat (lhs) */
+/* dfr is the second decFloat (rhs) */
+/* */
+/* This effects the multiplication of two decFloats, both known to be */
+/* finite, leaving the result in a bcdnum ready for decFinalize (for */
+/* use in Multiply) or in a following addition (FMA). */
+/* */
+/* bcdacc must have space for at least DECPMAX9*18+1 bytes. */
+/* No error is possible and no status is set. */
+/* ------------------------------------------------------------------ */
+/* This routine has two separate implementations of the core */
+/* multiplication; both using base-billion. One uses only 32-bit */
+/* variables (Ints and uInts) or smaller; the other uses uLongs (for */
+/* multiplication and addition only). Both implementations cover */
+/* both arithmetic sizes (DOUBLE and QUAD) in order to allow timing */
+/* comparisons. In any one compilation only one implementation for */
+/* each size can be used, and if DECUSE64 is 0 then use of the 32-bit */
+/* version is forced. */
+/* */
+/* Historical note: an earlier version of this code also supported the */
+/* 256-bit format and has been preserved. That is somewhat trickier */
+/* during lazy carry splitting because the initial quotient estimate */
+/* (est) can exceed 32 bits. */
+
+#define MULTBASE BILLION /* the base used for multiply */
+#define MULOPLEN DECPMAX9 /* operand length ('digits' base 10**9) */
+#define MULACCLEN (MULOPLEN*2) /* accumulator length (ditto) */
+#define LEADZEROS (MULACCLEN*9 - DECPMAX*2) /* leading zeros always */
+
+/* Assertions: exponent not too large and MULACCLEN is a multiple of 4 */
+#if DECEMAXD>9
+ #error Exponent may overflow when doubled for Multiply
+#endif
+#if MULACCLEN!=(MULACCLEN/4)*4
+ /* This assumption is used below only for initialization */
+ #error MULACCLEN is not a multiple of 4
+#endif
+
+static void decFiniteMultiply(bcdnum *num, uByte *bcdacc,
+ const decFloat *dfl, const decFloat *dfr) {
+ uInt bufl[MULOPLEN]; /* left coefficient (base-billion) */
+ uInt bufr[MULOPLEN]; /* right coefficient (base-billion) */
+ uInt *ui, *uj; /* work */
+ uByte *ub; /* .. */
+
+ #if DECUSE64
+ uLong accl[MULACCLEN]; /* lazy accumulator (base-billion+) */
+ uLong *pl; /* work -> lazy accumulator */
+ uInt acc[MULACCLEN]; /* coefficent in base-billion .. */
+ #else
+ uInt acc[MULACCLEN*2]; /* accumulator in base-billion .. */
+ #endif
+ uInt *pa; /* work -> accumulator */
+ /*printf("Base10**9: OpLen=%d MulAcclen=%d\n", OPLEN, MULACCLEN); */
+
+ /* Calculate sign and exponent */
+ num->sign=(DFWORD(dfl, 0)^DFWORD(dfr, 0)) & DECFLOAT_Sign;
+ num->exponent=GETEXPUN(dfl)+GETEXPUN(dfr); /* [see assertion above] */
+
+ /* Extract the coefficients and prepare the accumulator */
+ /* the coefficients of the operands are decoded into base-billion */
+ /* numbers in uInt arrays (bufl and bufr, LSD at offset 0) of the */
+ /* appropriate size. */
+ GETCOEFFBILL(dfl, bufl);
+ GETCOEFFBILL(dfr, bufr);
+ #if DECTRACE && 0
+ printf("CoeffbL:");
+ for (ui=bufl+MULOPLEN-1; ui>=bufl; ui--) printf(" %08lx", (LI)*ui);
+ printf("\n");
+ printf("CoeffbR:");
+ for (uj=bufr+MULOPLEN-1; uj>=bufr; uj--) printf(" %08lx", (LI)*uj);
+ printf("\n");
+ #endif
+
+ /* start the 64-bit/32-bit differing paths... */
+#if DECUSE64
+
+ /* zero the accumulator */
+ #if MULACCLEN==4
+ accl[0]=0; accl[1]=0; accl[2]=0; accl[3]=0;
+ #else /* use a loop */
+ /* MULACCLEN is a multiple of four, asserted above */
+ for (pl=accl; pl<accl+MULACCLEN; pl+=4) {
+ *pl=0; *(pl+1)=0; *(pl+2)=0; *(pl+3)=0;/* [reduce overhead] */
+ } /* pl */
+ #endif
+
+ /* Effect the multiplication */
+ /* The multiplcation proceeds using MFC's lazy-carry resolution */
+ /* algorithm from decNumber. First, the multiplication is */
+ /* effected, allowing accumulation of the partial products (which */
+ /* are in base-billion at each column position) into 64 bits */
+ /* without resolving back to base=billion after each addition. */
+ /* These 64-bit numbers (which may contain up to 19 decimal digits) */
+ /* are then split using the Clark & Cowlishaw algorithm (see below). */
+ /* [Testing for 0 in the inner loop is not really a 'win'] */
+ for (ui=bufr; ui<bufr+MULOPLEN; ui++) { /* over each item in rhs */
+ if (*ui==0) continue; /* product cannot affect result */
+ pl=accl+(ui-bufr); /* where to add the lhs */
+ for (uj=bufl; uj<bufl+MULOPLEN; uj++, pl++) { /* over each item in lhs */
+ /* if (*uj==0) continue; // product cannot affect result */
+ *pl+=((uLong)*ui)*(*uj);
+ } /* uj */
+ } /* ui */
+
+ /* The 64-bit carries must now be resolved; this means that a */
+ /* quotient/remainder has to be calculated for base-billion (1E+9). */
+ /* For this, Clark & Cowlishaw's quotient estimation approach (also */
+ /* used in decNumber) is needed, because 64-bit divide is generally */
+ /* extremely slow on 32-bit machines, and may be slower than this */
+ /* approach even on 64-bit machines. This algorithm splits X */
+ /* using: */
+ /* */
+ /* magic=2**(A+B)/1E+9; // 'magic number' */
+ /* hop=X/2**A; // high order part of X (by shift) */
+ /* est=magic*hop/2**B // quotient estimate (may be low by 1) */
+ /* */
+ /* A and B are quite constrained; hop and magic must fit in 32 bits, */
+ /* and 2**(A+B) must be as large as possible (which is 2**61 if */
+ /* magic is to fit). Further, maxX increases with the length of */
+ /* the operands (and hence the number of partial products */
+ /* accumulated); maxX is OPLEN*(10**18), which is up to 19 digits. */
+ /* */
+ /* It can be shown that when OPLEN is 2 then the maximum error in */
+ /* the estimated quotient is <1, but for larger maximum x the */
+ /* maximum error is above 1 so a correction that is >1 may be */
+ /* needed. Values of A and B are chosen to satisfy the constraints */
+ /* just mentioned while minimizing the maximum error (and hence the */
+ /* maximum correction), as shown in the following table: */
+ /* */
+ /* Type OPLEN A B maxX maxError maxCorrection */
+ /* --------------------------------------------------------- */
+ /* DOUBLE 2 29 32 <2*10**18 0.63 1 */
+ /* QUAD 4 30 31 <4*10**18 1.17 2 */
+ /* */
+ /* In the OPLEN==2 case there is most choice, but the value for B */
+ /* of 32 has a big advantage as then the calculation of the */
+ /* estimate requires no shifting; the compiler can extract the high */
+ /* word directly after multiplying magic*hop. */
+ #define MULMAGIC 2305843009U /* 2**61/10**9 [both cases] */
+ #if DOUBLE
+ #define MULSHIFTA 29
+ #define MULSHIFTB 32
+ #elif QUAD
+ #define MULSHIFTA 30
+ #define MULSHIFTB 31
+ #else
+ #error Unexpected type
+ #endif
+
+ #if DECTRACE
+ printf("MulAccl:");
+ for (pl=accl+MULACCLEN-1; pl>=accl; pl--)
+ printf(" %08lx:%08lx", (LI)(*pl>>32), (LI)(*pl&0xffffffff));
+ printf("\n");
+ #endif
+
+ for (pl=accl, pa=acc; pl<accl+MULACCLEN; pl++, pa++) { /* each column position */
+ uInt lo, hop; /* work */
+ uInt est; /* cannot exceed 4E+9 */
+ if (*pl>MULTBASE) {
+ /* *pl holds a binary number which needs to be split */
+ hop=(uInt)(*pl>>MULSHIFTA);
+ est=(uInt)(((uLong)hop*MULMAGIC)>>MULSHIFTB);
+ /* the estimate is now in est; now calculate hi:lo-est*10**9; */
+ /* happily the top word of the result is irrelevant because it */
+ /* will always be zero so this needs only one multiplication */
+ lo=(uInt)(*pl-((uLong)est*MULTBASE)); /* low word of result */
+ /* If QUAD, the correction here could be +2 */
+ if (lo>=MULTBASE) {
+ lo-=MULTBASE; /* correct by +1 */
+ est++;
+ #if QUAD
+ /* may need to correct by +2 */
+ if (lo>=MULTBASE) {
+ lo-=MULTBASE;
+ est++;
+ }
+ #endif
+ }
+ /* finally place lo as the new coefficient 'digit' and add est to */
+ /* the next place up [this is safe because this path is never */
+ /* taken on the final iteration as *pl will fit] */
+ *pa=lo;
+ *(pl+1)+=est;
+ } /* *pl needed split */
+ else { /* *pl<MULTBASE */
+ *pa=(uInt)*pl; /* just copy across */
+ }
+ } /* pl loop */
+
+#else /* 32-bit */
+ for (pa=acc;; pa+=4) { /* zero the accumulator */
+ *pa=0; *(pa+1)=0; *(pa+2)=0; *(pa+3)=0; /* [reduce overhead] */
+ if (pa==acc+MULACCLEN*2-4) break; /* multiple of 4 asserted */
+ } /* pa */
+
+ /* Effect the multiplication */
+ /* uLongs are not available (and in particular, there is no uLong */
+ /* divide) but it is still possible to use MFC's lazy-carry */
+ /* resolution algorithm from decNumber. First, the multiplication */
+ /* is effected, allowing accumulation of the partial products */
+ /* (which are in base-billion at each column position) into 64 bits */
+ /* [with the high-order 32 bits in each position being held at */
+ /* offset +ACCLEN from the low-order 32 bits in the accumulator]. */
+ /* These 64-bit numbers (which may contain up to 19 decimal digits) */
+ /* are then split using the Clark & Cowlishaw algorithm (see */
+ /* below). */
+ for (ui=bufr;; ui++) { /* over each item in rhs */
+ uInt hi, lo; /* words of exact multiply result */
+ pa=acc+(ui-bufr); /* where to add the lhs */
+ for (uj=bufl;; uj++, pa++) { /* over each item in lhs */
+ LONGMUL32HI(hi, *ui, *uj); /* calculate product of digits */
+ lo=(*ui)*(*uj); /* .. */
+ *pa+=lo; /* accumulate low bits and .. */
+ *(pa+MULACCLEN)+=hi+(*pa<lo); /* .. high bits with any carry */
+ if (uj==bufl+MULOPLEN-1) break;
+ }
+ if (ui==bufr+MULOPLEN-1) break;
+ }
+
+ /* The 64-bit carries must now be resolved; this means that a */
+ /* quotient/remainder has to be calculated for base-billion (1E+9). */
+ /* For this, Clark & Cowlishaw's quotient estimation approach (also */
+ /* used in decNumber) is needed, because 64-bit divide is generally */
+ /* extremely slow on 32-bit machines. This algorithm splits X */
+ /* using: */
+ /* */
+ /* magic=2**(A+B)/1E+9; // 'magic number' */
+ /* hop=X/2**A; // high order part of X (by shift) */
+ /* est=magic*hop/2**B // quotient estimate (may be low by 1) */
+ /* */
+ /* A and B are quite constrained; hop and magic must fit in 32 bits, */
+ /* and 2**(A+B) must be as large as possible (which is 2**61 if */
+ /* magic is to fit). Further, maxX increases with the length of */
+ /* the operands (and hence the number of partial products */
+ /* accumulated); maxX is OPLEN*(10**18), which is up to 19 digits. */
+ /* */
+ /* It can be shown that when OPLEN is 2 then the maximum error in */
+ /* the estimated quotient is <1, but for larger maximum x the */
+ /* maximum error is above 1 so a correction that is >1 may be */
+ /* needed. Values of A and B are chosen to satisfy the constraints */
+ /* just mentioned while minimizing the maximum error (and hence the */
+ /* maximum correction), as shown in the following table: */
+ /* */
+ /* Type OPLEN A B maxX maxError maxCorrection */
+ /* --------------------------------------------------------- */
+ /* DOUBLE 2 29 32 <2*10**18 0.63 1 */
+ /* QUAD 4 30 31 <4*10**18 1.17 2 */
+ /* */
+ /* In the OPLEN==2 case there is most choice, but the value for B */
+ /* of 32 has a big advantage as then the calculation of the */
+ /* estimate requires no shifting; the high word is simply */
+ /* calculated from multiplying magic*hop. */
+ #define MULMAGIC 2305843009U /* 2**61/10**9 [both cases] */
+ #if DOUBLE
+ #define MULSHIFTA 29
+ #define MULSHIFTB 32
+ #elif QUAD
+ #define MULSHIFTA 30
+ #define MULSHIFTB 31
+ #else
+ #error Unexpected type
+ #endif
+
+ #if DECTRACE
+ printf("MulHiLo:");
+ for (pa=acc+MULACCLEN-1; pa>=acc; pa--)
+ printf(" %08lx:%08lx", (LI)*(pa+MULACCLEN), (LI)*pa);
+ printf("\n");
+ #endif
+
+ for (pa=acc;; pa++) { /* each low uInt */
+ uInt hi, lo; /* words of exact multiply result */
+ uInt hop, estlo; /* work */
+ #if QUAD
+ uInt esthi; /* .. */
+ #endif
+
+ lo=*pa;
+ hi=*(pa+MULACCLEN); /* top 32 bits */
+ /* hi and lo now hold a binary number which needs to be split */
+
+ #if DOUBLE
+ hop=(hi<<3)+(lo>>MULSHIFTA); /* hi:lo/2**29 */
+ LONGMUL32HI(estlo, hop, MULMAGIC);/* only need the high word */
+ /* [MULSHIFTB is 32, so estlo can be used directly] */
+ /* the estimate is now in estlo; now calculate hi:lo-est*10**9; */
+ /* happily the top word of the result is irrelevant because it */
+ /* will always be zero so this needs only one multiplication */
+ lo-=(estlo*MULTBASE);
+ /* esthi=0; // high word is ignored below */
+ /* the correction here will be at most +1; do it */
+ if (lo>=MULTBASE) {
+ lo-=MULTBASE;
+ estlo++;
+ }
+ #elif QUAD
+ hop=(hi<<2)+(lo>>MULSHIFTA); /* hi:lo/2**30 */
+ LONGMUL32HI(esthi, hop, MULMAGIC);/* shift will be 31 .. */
+ estlo=hop*MULMAGIC; /* .. so low word needed */
+ estlo=(esthi<<1)+(estlo>>MULSHIFTB); /* [just the top bit] */
+ /* esthi=0; // high word is ignored below */
+ lo-=(estlo*MULTBASE); /* as above */
+ /* the correction here could be +1 or +2 */
+ if (lo>=MULTBASE) {
+ lo-=MULTBASE;
+ estlo++;
+ }
+ if (lo>=MULTBASE) {
+ lo-=MULTBASE;
+ estlo++;
+ }
+ #else
+ #error Unexpected type
+ #endif
+
+ /* finally place lo as the new accumulator digit and add est to */
+ /* the next place up; this latter add could cause a carry of 1 */
+ /* to the high word of the next place */
+ *pa=lo;
+ *(pa+1)+=estlo;
+ /* esthi is always 0 for DOUBLE and QUAD so this is skipped */
+ /* *(pa+1+MULACCLEN)+=esthi; */
+ if (*(pa+1)<estlo) *(pa+1+MULACCLEN)+=1; /* carry */
+ if (pa==acc+MULACCLEN-2) break; /* [MULACCLEN-1 will never need split] */
+ } /* pa loop */
+#endif
+
+ /* At this point, whether using the 64-bit or the 32-bit paths, the */
+ /* accumulator now holds the (unrounded) result in base-billion; */
+ /* one base-billion 'digit' per uInt. */
+ #if DECTRACE
+ printf("MultAcc:");
+ for (pa=acc+MULACCLEN-1; pa>=acc; pa--) printf(" %09ld", (LI)*pa);
+ printf("\n");
+ #endif
+
+ /* Now convert to BCD for rounding and cleanup, starting from the */
+ /* most significant end */
+ pa=acc+MULACCLEN-1;
+ if (*pa!=0) num->msd=bcdacc+LEADZEROS;/* drop known lead zeros */
+ else { /* >=1 word of leading zeros */
+ num->msd=bcdacc; /* known leading zeros are gone */
+ pa--; /* skip first word .. */
+ for (; *pa==0; pa--) if (pa==acc) break; /* .. and any more leading 0s */
+ }
+ for (ub=bcdacc;; pa--, ub+=9) {
+ if (*pa!=0) { /* split(s) needed */
+ uInt top, mid, rem; /* work */
+ /* *pa is non-zero -- split the base-billion acc digit into */
+ /* hi, mid, and low three-digits */
+ #define mulsplit9 1000000 /* divisor */
+ #define mulsplit6 1000 /* divisor */
+ /* The splitting is done by simple divides and remainders, */
+ /* assuming the compiler will optimize these where useful */
+ /* [GCC does] */
+ top=*pa/mulsplit9;
+ rem=*pa%mulsplit9;
+ mid=rem/mulsplit6;
+ rem=rem%mulsplit6;
+ /* lay out the nine BCD digits (plus one unwanted byte) */
+ UINTAT(ub) =UINTAT(&BIN2BCD8[top*4]);
+ UINTAT(ub+3)=UINTAT(&BIN2BCD8[mid*4]);
+ UINTAT(ub+6)=UINTAT(&BIN2BCD8[rem*4]);
+ }
+ else { /* *pa==0 */
+ UINTAT(ub)=0; /* clear 9 BCD8s */
+ UINTAT(ub+4)=0; /* .. */
+ *(ub+8)=0; /* .. */
+ }
+ if (pa==acc) break;
+ } /* BCD conversion loop */
+
+ num->lsd=ub+8; /* complete the bcdnum .. */
+
+ #if DECTRACE
+ decShowNum(num, "postmult");
+ decFloatShow(dfl, "dfl");
+ decFloatShow(dfr, "dfr");
+ #endif
+ return;
+ } /* decFiniteMultiply */
+
+/* ------------------------------------------------------------------ */
+/* decFloatAbs -- absolute value, heeding NaNs, etc. */
+/* */
+/* result gets the canonicalized df with sign 0 */
+/* df is the decFloat to abs */
+/* set is the context */
+/* returns result */
+/* */
+/* This has the same effect as decFloatPlus unless df is negative, */
+/* in which case it has the same effect as decFloatMinus. The */
+/* effect is also the same as decFloatCopyAbs except that NaNs are */
+/* handled normally (the sign of a NaN is not affected, and an sNaN */
+/* will signal) and the result will be canonical. */
+/* ------------------------------------------------------------------ */
+decFloat * decFloatAbs(decFloat *result, const decFloat *df,
+ decContext *set) {
+ if (DFISNAN(df)) return decNaNs(result, df, NULL, set);
+ decCanonical(result, df); /* copy and check */
+ DFBYTE(result, 0)&=~0x80; /* zero sign bit */
+ return result;
+ } /* decFloatAbs */
+
+/* ------------------------------------------------------------------ */
+/* decFloatAdd -- add two decFloats */
+/* */
+/* result gets the result of adding dfl and dfr: */
+/* dfl is the first decFloat (lhs) */
+/* dfr is the second decFloat (rhs) */
+/* set is the context */
+/* returns result */
+/* */
+/* ------------------------------------------------------------------ */
+decFloat * decFloatAdd(decFloat *result,
+ const decFloat *dfl, const decFloat *dfr,
+ decContext *set) {
+ bcdnum num; /* for final conversion */
+ Int expl, expr; /* left and right exponents */
+ uInt *ui, *uj; /* work */
+ uByte *ub; /* .. */
+
+ uInt sourhil, sourhir; /* top words from source decFloats */
+ /* [valid only until specials */
+ /* handled or exponents decoded] */
+ uInt diffsign; /* non-zero if signs differ */
+ uInt carry; /* carry: 0 or 1 before add loop */
+ Int overlap; /* coefficient overlap (if full) */
+ /* the following buffers hold coefficients with various alignments */
+ /* (see commentary and diagrams below) */
+ uByte acc[4+2+DECPMAX*3+8];
+ uByte buf[4+2+DECPMAX*2];
+ uByte *umsd, *ulsd; /* local MSD and LSD pointers */
+
+ #if DECLITEND
+ #define CARRYPAT 0x01000000 /* carry=1 pattern */
+ #else
+ #define CARRYPAT 0x00000001 /* carry=1 pattern */
+ #endif
+
+ /* Start decoding the arguments */
+ /* the initial exponents are placed into the opposite Ints to */
+ /* that which might be expected; there are two sets of data to */
+ /* keep track of (each decFloat and the corresponding exponent), */
+ /* and this scheme means that at the swap point (after comparing */
+ /* exponents) only one pair of words needs to be swapped */
+ /* whichever path is taken (thereby minimising worst-case path) */
+ sourhil=DFWORD(dfl, 0); /* LHS top word */
+ expr=DECCOMBEXP[sourhil>>26]; /* get exponent high bits (in place) */
+ sourhir=DFWORD(dfr, 0); /* RHS top word */
+ expl=DECCOMBEXP[sourhir>>26];
+
+ diffsign=(sourhil^sourhir)&DECFLOAT_Sign;
+
+ if (EXPISSPECIAL(expl | expr)) { /* either is special? */
+ if (DFISNAN(dfl) || DFISNAN(dfr)) return decNaNs(result, dfl, dfr, set);
+ /* one or two infinities */
+ /* two infinities with different signs is invalid */
+ if (diffsign && DFISINF(dfl) && DFISINF(dfr))
+ return decInvalid(result, set);
+ if (DFISINF(dfl)) return decInfinity(result, dfl); /* LHS is infinite */
+ return decInfinity(result, dfr); /* RHS must be Infinite */
+ }
+
+ /* Here when both arguments are finite */
+
+ /* complete exponent gathering (keeping swapped) */
+ expr+=GETECON(dfl)-DECBIAS; /* .. + continuation and unbias */
+ expl+=GETECON(dfr)-DECBIAS;
+ /* here expr has exponent from lhs, and vice versa */
+
+ /* now swap either exponents or argument pointers */
+ if (expl<=expr) {
+ /* original left is bigger */
+ Int expswap=expl;
+ expl=expr;
+ expr=expswap;
+ /* printf("left bigger\n"); */
+ }
+ else {
+ const decFloat *dfswap=dfl;
+ dfl=dfr;
+ dfr=dfswap;
+ /* printf("right bigger\n"); */
+ }
+ /* [here dfl and expl refer to the datum with the larger exponent, */
+ /* of if the exponents are equal then the original LHS argument] */
+
+ /* if lhs is zero then result will be the rhs (now known to have */
+ /* the smaller exponent), which also may need to be tested for zero */
+ /* for the weird IEEE 754 sign rules */
+ if (DFISZERO(dfl)) {
+ decCanonical(result, dfr); /* clean copy */
+ /* "When the sum of two operands with opposite signs is */
+ /* exactly zero, the sign of that sum shall be '+' in all */
+ /* rounding modes except round toward -Infinity, in which */
+ /* mode that sign shall be '-'." */
+ if (diffsign && DFISZERO(result)) {
+ DFWORD(result, 0)&=~DECFLOAT_Sign; /* assume sign 0 */
+ if (set->round==DEC_ROUND_FLOOR) DFWORD(result, 0)|=DECFLOAT_Sign;
+ }
+ return result;
+ } /* numfl is zero */
+ /* [here, LHS is non-zero; code below assumes that] */
+
+ /* Coefficients layout during the calculations to follow: */
+ /* */
+ /* Overlap case: */
+ /* +------------------------------------------------+ */
+ /* acc: |0000| coeffa | tail B | | */
+ /* +------------------------------------------------+ */
+ /* buf: |0000| pad0s | coeffb | | */
+ /* +------------------------------------------------+ */
+ /* */
+ /* Touching coefficients or gap: */
+ /* +------------------------------------------------+ */
+ /* acc: |0000| coeffa | gap | coeffb | */
+ /* +------------------------------------------------+ */
+ /* [buf not used or needed; gap clamped to Pmax] */
+
+ /* lay out lhs coefficient into accumulator; this starts at acc+4 */
+ /* for decDouble or acc+6 for decQuad so the LSD is word- */
+ /* aligned; the top word gap is there only in case a carry digit */
+ /* is prefixed after the add -- it does not need to be zeroed */
+ #if DOUBLE
+ #define COFF 4 /* offset into acc */
+ #elif QUAD
+ USHORTAT(acc+4)=0; /* prefix 00 */
+ #define COFF 6 /* offset into acc */
+ #endif
+
+ GETCOEFF(dfl, acc+COFF); /* decode from decFloat */
+ ulsd=acc+COFF+DECPMAX-1;
+ umsd=acc+4; /* [having this here avoids */
+ /* weird GCC optimizer failure] */
+ #if DECTRACE
+ {bcdnum tum;
+ tum.msd=umsd;
+ tum.lsd=ulsd;
+ tum.exponent=expl;
+ tum.sign=DFWORD(dfl, 0) & DECFLOAT_Sign;
+ decShowNum(&tum, "dflx");}
+ #endif
+
+ /* if signs differ, take ten's complement of lhs (here the */
+ /* coefficient is subtracted from all-nines; the 1 is added during */
+ /* the later add cycle -- zeros to the right do not matter because */
+ /* the complement of zero is zero); these are fixed-length inverts */
+ /* where the lsd is known to be at a 4-byte boundary (so no borrow */
+ /* possible) */
+ carry=0; /* assume no carry */
+ if (diffsign) {
+ carry=CARRYPAT; /* for +1 during add */
+ UINTAT(acc+ 4)=0x09090909-UINTAT(acc+ 4);
+ UINTAT(acc+ 8)=0x09090909-UINTAT(acc+ 8);
+ UINTAT(acc+12)=0x09090909-UINTAT(acc+12);
+ UINTAT(acc+16)=0x09090909-UINTAT(acc+16);
+ #if QUAD
+ UINTAT(acc+20)=0x09090909-UINTAT(acc+20);
+ UINTAT(acc+24)=0x09090909-UINTAT(acc+24);
+ UINTAT(acc+28)=0x09090909-UINTAT(acc+28);
+ UINTAT(acc+32)=0x09090909-UINTAT(acc+32);
+ UINTAT(acc+36)=0x09090909-UINTAT(acc+36);
+ #endif
+ } /* diffsign */
+
+ /* now process the rhs coefficient; if it cannot overlap lhs then */
+ /* it can be put straight into acc (with an appropriate gap, if */
+ /* needed) because no actual addition will be needed (except */
+ /* possibly to complete ten's complement) */
+ overlap=DECPMAX-(expl-expr);
+ #if DECTRACE
+ printf("exps: %ld %ld\n", (LI)expl, (LI)expr);
+ printf("Overlap=%ld carry=%08lx\n", (LI)overlap, (LI)carry);
+ #endif
+
+ if (overlap<=0) { /* no overlap possible */
+ uInt gap; /* local work */
+ /* since a full addition is not needed, a ten's complement */
+ /* calculation started above may need to be completed */
+ if (carry) {
+ for (ub=ulsd; *ub==9; ub--) *ub=0;
+ *ub+=1;
+ carry=0; /* taken care of */
+ }
+ /* up to DECPMAX-1 digits of the final result can extend down */
+ /* below the LSD of the lhs, so if the gap is >DECPMAX then the */
+ /* rhs will be simply sticky bits. In this case the gap is */
+ /* clamped to DECPMAX and the exponent adjusted to suit [this is */
+ /* safe because the lhs is non-zero]. */
+ gap=-overlap;
+ if (gap>DECPMAX) {
+ expr+=gap-1;
+ gap=DECPMAX;
+ }
+ ub=ulsd+gap+1; /* where MSD will go */
+ /* Fill the gap with 0s; note that there is no addition to do */
+ ui=&UINTAT(acc+COFF+DECPMAX); /* start of gap */
+ for (; ui<&UINTAT(ub); ui++) *ui=0; /* mind the gap */
+ if (overlap<-DECPMAX) { /* gap was > DECPMAX */
+ *ub=(uByte)(!DFISZERO(dfr)); /* make sticky digit */
+ }
+ else { /* need full coefficient */
+ GETCOEFF(dfr, ub); /* decode from decFloat */
+ ub+=DECPMAX-1; /* new LSD... */
+ }
+ ulsd=ub; /* save new LSD */
+ } /* no overlap possible */
+
+ else { /* overlap>0 */
+ /* coefficients overlap (perhaps completely, although also */
+ /* perhaps only where zeros) */
+ ub=buf+COFF+DECPMAX-overlap; /* where MSD will go */
+ /* Fill the prefix gap with 0s; 8 will cover most common */
+ /* unalignments, so start with direct assignments (a loop is */
+ /* then used for any remaining -- the loop (and the one in a */
+ /* moment) is not then on the critical path because the number */
+ /* of additions is reduced by (at least) two in this case) */
+ UINTAT(buf+4)=0; /* [clears decQuad 00 too] */
+ UINTAT(buf+8)=0;
+ if (ub>buf+12) {
+ ui=&UINTAT(buf+12); /* start of any remaining */
+ for (; ui<&UINTAT(ub); ui++) *ui=0; /* fill them */
+ }
+ GETCOEFF(dfr, ub); /* decode from decFloat */
+
+ /* now move tail of rhs across to main acc; again use direct */
+ /* assignment for 8 digits-worth */
+ UINTAT(acc+COFF+DECPMAX)=UINTAT(buf+COFF+DECPMAX);
+ UINTAT(acc+COFF+DECPMAX+4)=UINTAT(buf+COFF+DECPMAX+4);
+ if (buf+COFF+DECPMAX+8<ub+DECPMAX) {
+ uj=&UINTAT(buf+COFF+DECPMAX+8); /* source */
+ ui=&UINTAT(acc+COFF+DECPMAX+8); /* target */
+ for (; uj<&UINTAT(ub+DECPMAX); ui++, uj++) *ui=*uj;
+ }
+
+ ulsd=acc+(ub-buf+DECPMAX-1); /* update LSD pointer */
+
+ /* now do the add of the non-tail; this is all nicely aligned, */
+ /* and is over a multiple of four digits (because for Quad two */
+ /* two 0 digits were added on the left); words in both acc and */
+ /* buf (buf especially) will often be zero */
+ /* [byte-by-byte add, here, is about 15% slower than the by-fours] */
+
+ /* Now effect the add; this is harder on a little-endian */
+ /* machine as the inter-digit carry cannot use the usual BCD */
+ /* addition trick because the bytes are loaded in the wrong order */
+ /* [this loop could be unrolled, but probably scarcely worth it] */
+
+ ui=&UINTAT(acc+COFF+DECPMAX-4); /* target LSW (acc) */
+ uj=&UINTAT(buf+COFF+DECPMAX-4); /* source LSW (buf, to add to acc) */
+
+ #if !DECLITEND
+ for (; ui>=&UINTAT(acc+4); ui--, uj--) {
+ /* bcd8 add */
+ carry+=*uj; /* rhs + carry */
+ if (carry==0) continue; /* no-op */
+ carry+=*ui; /* lhs */
+ /* Big-endian BCD adjust (uses internal carry) */
+ carry+=0x76f6f6f6; /* note top nibble not all bits */
+ *ui=(carry & 0x0f0f0f0f) - ((carry & 0x60606060)>>4); /* BCD adjust */
+ carry>>=31; /* true carry was at far left */
+ } /* add loop */
+ #else
+ for (; ui>=&UINTAT(acc+4); ui--, uj--) {
+ /* bcd8 add */
+ carry+=*uj; /* rhs + carry */
+ if (carry==0) continue; /* no-op [common if unaligned] */
+ carry+=*ui; /* lhs */
+ /* Little-endian BCD adjust; inter-digit carry must be manual */
+ /* because the lsb from the array will be in the most-significant */
+ /* byte of carry */
+ carry+=0x76767676; /* note no inter-byte carries */
+ carry+=(carry & 0x80000000)>>15;
+ carry+=(carry & 0x00800000)>>15;
+ carry+=(carry & 0x00008000)>>15;
+ carry-=(carry & 0x60606060)>>4; /* BCD adjust back */
+ *ui=carry & 0x0f0f0f0f; /* clear debris and save */
+ /* here, final carry-out bit is at 0x00000080; move it ready */
+ /* for next word-add (i.e., to 0x01000000) */
+ carry=(carry & 0x00000080)<<17;
+ } /* add loop */
+ #endif
+ #if DECTRACE
+ {bcdnum tum;
+ printf("Add done, carry=%08lx, diffsign=%ld\n", (LI)carry, (LI)diffsign);
+ tum.msd=umsd; /* acc+4; */
+ tum.lsd=ulsd;
+ tum.exponent=0;
+ tum.sign=0;
+ decShowNum(&tum, "dfadd");}
+ #endif
+ } /* overlap possible */
+
+ /* ordering here is a little strange in order to have slowest path */
+ /* first in GCC asm listing */
+ if (diffsign) { /* subtraction */
+ if (!carry) { /* no carry out means RHS<LHS */
+ /* borrowed -- take ten's complement */
+ /* sign is lhs sign */
+ num.sign=DFWORD(dfl, 0) & DECFLOAT_Sign;
+
+ /* invert the coefficient first by fours, then add one; space */
+ /* at the end of the buffer ensures the by-fours is always */
+ /* safe, but lsd+1 must be cleared to prevent a borrow */
+ /* if big-endian */
+ #if !DECLITEND
+ *(ulsd+1)=0;
+ #endif
+ /* there are always at least four coefficient words */
+ UINTAT(umsd) =0x09090909-UINTAT(umsd);
+ UINTAT(umsd+4) =0x09090909-UINTAT(umsd+4);
+ UINTAT(umsd+8) =0x09090909-UINTAT(umsd+8);
+ UINTAT(umsd+12)=0x09090909-UINTAT(umsd+12);
+ #if DOUBLE
+ #define BNEXT 16
+ #elif QUAD
+ UINTAT(umsd+16)=0x09090909-UINTAT(umsd+16);
+ UINTAT(umsd+20)=0x09090909-UINTAT(umsd+20);
+ UINTAT(umsd+24)=0x09090909-UINTAT(umsd+24);
+ UINTAT(umsd+28)=0x09090909-UINTAT(umsd+28);
+ UINTAT(umsd+32)=0x09090909-UINTAT(umsd+32);
+ #define BNEXT 36
+ #endif
+ if (ulsd>=umsd+BNEXT) { /* unaligned */
+ /* eight will handle most unaligments for Double; 16 for Quad */
+ UINTAT(umsd+BNEXT)=0x09090909-UINTAT(umsd+BNEXT);
+ UINTAT(umsd+BNEXT+4)=0x09090909-UINTAT(umsd+BNEXT+4);
+ #if DOUBLE
+ #define BNEXTY (BNEXT+8)
+ #elif QUAD
+ UINTAT(umsd+BNEXT+8)=0x09090909-UINTAT(umsd+BNEXT+8);
+ UINTAT(umsd+BNEXT+12)=0x09090909-UINTAT(umsd+BNEXT+12);
+ #define BNEXTY (BNEXT+16)
+ #endif
+ if (ulsd>=umsd+BNEXTY) { /* very unaligned */
+ ui=&UINTAT(umsd+BNEXTY); /* -> continue */
+ for (;;ui++) {
+ *ui=0x09090909-*ui; /* invert four digits */
+ if (ui>=&UINTAT(ulsd-3)) break; /* all done */
+ }
+ }
+ }
+ /* complete the ten's complement by adding 1 */
+ for (ub=ulsd; *ub==9; ub--) *ub=0;
+ *ub+=1;
+ } /* borrowed */
+
+ else { /* carry out means RHS>=LHS */
+ num.sign=DFWORD(dfr, 0) & DECFLOAT_Sign;
+ /* all done except for the special IEEE 754 exact-zero-result */
+ /* rule (see above); while testing for zero, strip leading */
+ /* zeros (which will save decFinalize doing it) (this is in */
+ /* diffsign path, so carry impossible and true umsd is */
+ /* acc+COFF) */
+
+ /* Check the initial coefficient area using the fast macro; */
+ /* this will often be all that needs to be done (as on the */
+ /* worst-case path when the subtraction was aligned and */
+ /* full-length) */
+ if (ISCOEFFZERO(acc+COFF)) {
+ umsd=acc+COFF+DECPMAX-1; /* so far, so zero */
+ if (ulsd>umsd) { /* more to check */
+ umsd++; /* to align after checked area */
+ for (; UINTAT(umsd)==0 && umsd+3<ulsd;) umsd+=4;
+ for (; *umsd==0 && umsd<ulsd;) umsd++;
+ }
+ if (*umsd==0) { /* must be true zero (and diffsign) */
+ num.sign=0; /* assume + */
+ if (set->round==DEC_ROUND_FLOOR) num.sign=DECFLOAT_Sign;
+ }
+ }
+ /* [else was not zero, might still have leading zeros] */
+ } /* subtraction gave positive result */
+ } /* diffsign */
+
+ else { /* same-sign addition */
+ num.sign=DFWORD(dfl, 0)&DECFLOAT_Sign;
+ #if DOUBLE
+ if (carry) { /* only possible with decDouble */
+ *(acc+3)=1; /* [Quad has leading 00] */
+ umsd=acc+3;
+ }
+ #endif
+ } /* same sign */
+
+ num.msd=umsd; /* set MSD .. */
+ num.lsd=ulsd; /* .. and LSD */
+ num.exponent=expr; /* set exponent to smaller */
+
+ #if DECTRACE
+ decFloatShow(dfl, "dfl");
+ decFloatShow(dfr, "dfr");
+ decShowNum(&num, "postadd");
+ #endif
+ return decFinalize(result, &num, set); /* round, check, and lay out */
+ } /* decFloatAdd */
+
+/* ------------------------------------------------------------------ */
+/* decFloatAnd -- logical digitwise AND of two decFloats */
+/* */
+/* result gets the result of ANDing dfl and dfr */
+/* dfl is the first decFloat (lhs) */
+/* dfr is the second decFloat (rhs) */
+/* set is the context */
+/* returns result, which will be canonical with sign=0 */
+/* */
+/* The operands must be positive, finite with exponent q=0, and */
+/* comprise just zeros and ones; if not, Invalid operation results. */
+/* ------------------------------------------------------------------ */
+decFloat * decFloatAnd(decFloat *result,
+ const decFloat *dfl, const decFloat *dfr,
+ decContext *set) {
+ if (!DFISUINT01(dfl) || !DFISUINT01(dfr)
+ || !DFISCC01(dfl) || !DFISCC01(dfr)) return decInvalid(result, set);
+ /* the operands are positive finite integers (q=0) with just 0s and 1s */
+ #if DOUBLE
+ DFWORD(result, 0)=ZEROWORD
+ |((DFWORD(dfl, 0) & DFWORD(dfr, 0))&0x04009124);
+ DFWORD(result, 1)=(DFWORD(dfl, 1) & DFWORD(dfr, 1))&0x49124491;
+ #elif QUAD
+ DFWORD(result, 0)=ZEROWORD
+ |((DFWORD(dfl, 0) & DFWORD(dfr, 0))&0x04000912);
+ DFWORD(result, 1)=(DFWORD(dfl, 1) & DFWORD(dfr, 1))&0x44912449;
+ DFWORD(result, 2)=(DFWORD(dfl, 2) & DFWORD(dfr, 2))&0x12449124;
+ DFWORD(result, 3)=(DFWORD(dfl, 3) & DFWORD(dfr, 3))&0x49124491;
+ #endif
+ return result;
+ } /* decFloatAnd */
+
+/* ------------------------------------------------------------------ */
+/* decFloatCanonical -- copy a decFloat, making canonical */
+/* */
+/* result gets the canonicalized df */
+/* df is the decFloat to copy and make canonical */
+/* returns result */
+/* */
+/* This works on specials, too; no error or exception is possible. */
+/* ------------------------------------------------------------------ */
+decFloat * decFloatCanonical(decFloat *result, const decFloat *df) {
+ return decCanonical(result, df);
+ } /* decFloatCanonical */
+
+/* ------------------------------------------------------------------ */
+/* decFloatClass -- return the class of a decFloat */
+/* */
+/* df is the decFloat to test */
+/* returns the decClass that df falls into */
+/* ------------------------------------------------------------------ */
+enum decClass decFloatClass(const decFloat *df) {
+ Int exp; /* exponent */
+ if (DFISSPECIAL(df)) {
+ if (DFISQNAN(df)) return DEC_CLASS_QNAN;
+ if (DFISSNAN(df)) return DEC_CLASS_SNAN;
+ /* must be an infinity */
+ if (DFISSIGNED(df)) return DEC_CLASS_NEG_INF;
+ return DEC_CLASS_POS_INF;
+ }
+ if (DFISZERO(df)) { /* quite common */
+ if (DFISSIGNED(df)) return DEC_CLASS_NEG_ZERO;
+ return DEC_CLASS_POS_ZERO;
+ }
+ /* is finite and non-zero; similar code to decFloatIsNormal, here */
+ /* [this could be speeded up slightly by in-lining decFloatDigits] */
+ exp=GETEXPUN(df) /* get unbiased exponent .. */
+ +decFloatDigits(df)-1; /* .. and make adjusted exponent */
+ if (exp>=DECEMIN) { /* is normal */
+ if (DFISSIGNED(df)) return DEC_CLASS_NEG_NORMAL;
+ return DEC_CLASS_POS_NORMAL;
+ }
+ /* is subnormal */
+ if (DFISSIGNED(df)) return DEC_CLASS_NEG_SUBNORMAL;
+ return DEC_CLASS_POS_SUBNORMAL;
+ } /* decFloatClass */
+
+/* ------------------------------------------------------------------ */
+/* decFloatClassString -- return the class of a decFloat as a string */
+/* */
+/* df is the decFloat to test */
+/* returns a constant string describing the class df falls into */
+/* ------------------------------------------------------------------ */
+const char *decFloatClassString(const decFloat *df) {
+ enum decClass eclass=decFloatClass(df);
+ if (eclass==DEC_CLASS_POS_NORMAL) return DEC_ClassString_PN;
+ if (eclass==DEC_CLASS_NEG_NORMAL) return DEC_ClassString_NN;
+ if (eclass==DEC_CLASS_POS_ZERO) return DEC_ClassString_PZ;
+ if (eclass==DEC_CLASS_NEG_ZERO) return DEC_ClassString_NZ;
+ if (eclass==DEC_CLASS_POS_SUBNORMAL) return DEC_ClassString_PS;
+ if (eclass==DEC_CLASS_NEG_SUBNORMAL) return DEC_ClassString_NS;
+ if (eclass==DEC_CLASS_POS_INF) return DEC_ClassString_PI;
+ if (eclass==DEC_CLASS_NEG_INF) return DEC_ClassString_NI;
+ if (eclass==DEC_CLASS_QNAN) return DEC_ClassString_QN;
+ if (eclass==DEC_CLASS_SNAN) return DEC_ClassString_SN;
+ return DEC_ClassString_UN; /* Unknown */
+ } /* decFloatClassString */
+
+/* ------------------------------------------------------------------ */
+/* decFloatCompare -- compare two decFloats; quiet NaNs allowed */
+/* */
+/* result gets the result of comparing dfl and dfr */
+/* dfl is the first decFloat (lhs) */
+/* dfr is the second decFloat (rhs) */
+/* set is the context */
+/* returns result, which may be -1, 0, 1, or NaN (Unordered) */
+/* ------------------------------------------------------------------ */
+decFloat * decFloatCompare(decFloat *result,
+ const decFloat *dfl, const decFloat *dfr,
+ decContext *set) {
+ Int comp; /* work */
+ /* NaNs are handled as usual */
+ if (DFISNAN(dfl) || DFISNAN(dfr)) return decNaNs(result, dfl, dfr, set);
+ /* numeric comparison needed */
+ comp=decNumCompare(dfl, dfr, 0);
+ decFloatZero(result);
+ if (comp==0) return result;
+ DFBYTE(result, DECBYTES-1)=0x01; /* LSD=1 */
+ if (comp<0) DFBYTE(result, 0)|=0x80; /* set sign bit */
+ return result;
+ } /* decFloatCompare */
+
+/* ------------------------------------------------------------------ */
+/* decFloatCompareSignal -- compare two decFloats; all NaNs signal */
+/* */
+/* result gets the result of comparing dfl and dfr */
+/* dfl is the first decFloat (lhs) */
+/* dfr is the second decFloat (rhs) */
+/* set is the context */
+/* returns result, which may be -1, 0, 1, or NaN (Unordered) */
+/* ------------------------------------------------------------------ */
+decFloat * decFloatCompareSignal(decFloat *result,
+ const decFloat *dfl, const decFloat *dfr,
+ decContext *set) {
+ Int comp; /* work */
+ /* NaNs are handled as usual, except that all NaNs signal */
+ if (DFISNAN(dfl) || DFISNAN(dfr)) {
+ set->status|=DEC_Invalid_operation;
+ return decNaNs(result, dfl, dfr, set);
+ }
+ /* numeric comparison needed */
+ comp=decNumCompare(dfl, dfr, 0);
+ decFloatZero(result);
+ if (comp==0) return result;
+ DFBYTE(result, DECBYTES-1)=0x01; /* LSD=1 */
+ if (comp<0) DFBYTE(result, 0)|=0x80; /* set sign bit */
+ return result;
+ } /* decFloatCompareSignal */
+
+/* ------------------------------------------------------------------ */
+/* decFloatCompareTotal -- compare two decFloats with total ordering */
+/* */
+/* result gets the result of comparing dfl and dfr */
+/* dfl is the first decFloat (lhs) */
+/* dfr is the second decFloat (rhs) */
+/* returns result, which may be -1, 0, or 1 */
+/* ------------------------------------------------------------------ */
+decFloat * decFloatCompareTotal(decFloat *result,
+ const decFloat *dfl, const decFloat *dfr) {
+ Int comp; /* work */
+ if (DFISNAN(dfl) || DFISNAN(dfr)) {
+ Int nanl, nanr; /* work */
+ /* morph NaNs to +/- 1 or 2, leave numbers as 0 */
+ nanl=DFISSNAN(dfl)+DFISQNAN(dfl)*2; /* quiet > signalling */
+ if (DFISSIGNED(dfl)) nanl=-nanl;
+ nanr=DFISSNAN(dfr)+DFISQNAN(dfr)*2;
+ if (DFISSIGNED(dfr)) nanr=-nanr;
+ if (nanl>nanr) comp=+1;
+ else if (nanl<nanr) comp=-1;
+ else { /* NaNs are the same type and sign .. must compare payload */
+ /* buffers need +2 for QUAD */
+ uByte bufl[DECPMAX+4]; /* for LHS coefficient + foot */
+ uByte bufr[DECPMAX+4]; /* for RHS coefficient + foot */
+ uByte *ub, *uc; /* work */
+ Int sigl; /* signum of LHS */
+ sigl=(DFISSIGNED(dfl) ? -1 : +1);
+
+ /* decode the coefficients */
+ /* (shift both right two if Quad to make a multiple of four) */
+ #if QUAD
+ USHORTAT(bufl)=0;
+ USHORTAT(bufr)=0;
+ #endif
+ GETCOEFF(dfl, bufl+QUAD*2); /* decode from decFloat */
+ GETCOEFF(dfr, bufr+QUAD*2); /* .. */
+ /* all multiples of four, here */
+ comp=0; /* assume equal */
+ for (ub=bufl, uc=bufr; ub<bufl+DECPMAX+QUAD*2; ub+=4, uc+=4) {
+ if (UINTAT(ub)==UINTAT(uc)) continue; /* so far so same */
+ /* about to find a winner; go by bytes in case little-endian */
+ for (;; ub++, uc++) {
+ if (*ub==*uc) continue;
+ if (*ub>*uc) comp=sigl; /* difference found */
+ else comp=-sigl; /* .. */
+ break;
+ }
+ }
+ } /* same NaN type and sign */
+ }
+ else {
+ /* numeric comparison needed */
+ comp=decNumCompare(dfl, dfr, 1); /* total ordering */
+ }
+ decFloatZero(result);
+ if (comp==0) return result;
+ DFBYTE(result, DECBYTES-1)=0x01; /* LSD=1 */
+ if (comp<0) DFBYTE(result, 0)|=0x80; /* set sign bit */
+ return result;
+ } /* decFloatCompareTotal */
+
+/* ------------------------------------------------------------------ */
+/* decFloatCompareTotalMag -- compare magnitudes with total ordering */
+/* */
+/* result gets the result of comparing abs(dfl) and abs(dfr) */
+/* dfl is the first decFloat (lhs) */
+/* dfr is the second decFloat (rhs) */
+/* returns result, which may be -1, 0, or 1 */
+/* ------------------------------------------------------------------ */
+decFloat * decFloatCompareTotalMag(decFloat *result,
+ const decFloat *dfl, const decFloat *dfr) {
+ decFloat a, b; /* for copy if needed */
+ /* copy and redirect signed operand(s) */
+ if (DFISSIGNED(dfl)) {
+ decFloatCopyAbs(&a, dfl);
+ dfl=&a;
+ }
+ if (DFISSIGNED(dfr)) {
+ decFloatCopyAbs(&b, dfr);
+ dfr=&b;
+ }
+ return decFloatCompareTotal(result, dfl, dfr);
+ } /* decFloatCompareTotalMag */
+
+/* ------------------------------------------------------------------ */
+/* decFloatCopy -- copy a decFloat as-is */
+/* */
+/* result gets the copy of dfl */
+/* dfl is the decFloat to copy */
+/* returns result */
+/* */
+/* This is a bitwise operation; no errors or exceptions are possible. */
+/* ------------------------------------------------------------------ */
+decFloat * decFloatCopy(decFloat *result, const decFloat *dfl) {
+ if (dfl!=result) *result=*dfl; /* copy needed */
+ return result;
+ } /* decFloatCopy */
+
+/* ------------------------------------------------------------------ */
+/* decFloatCopyAbs -- copy a decFloat as-is and set sign bit to 0 */
+/* */
+/* result gets the copy of dfl with sign bit 0 */
+/* dfl is the decFloat to copy */
+/* returns result */
+/* */
+/* This is a bitwise operation; no errors or exceptions are possible. */
+/* ------------------------------------------------------------------ */
+decFloat * decFloatCopyAbs(decFloat *result, const decFloat *dfl) {
+ if (dfl!=result) *result=*dfl; /* copy needed */
+ DFBYTE(result, 0)&=~0x80; /* zero sign bit */
+ return result;
+ } /* decFloatCopyAbs */
+
+/* ------------------------------------------------------------------ */
+/* decFloatCopyNegate -- copy a decFloat as-is with inverted sign bit */
+/* */
+/* result gets the copy of dfl with sign bit inverted */
+/* dfl is the decFloat to copy */
+/* returns result */
+/* */
+/* This is a bitwise operation; no errors or exceptions are possible. */
+/* ------------------------------------------------------------------ */
+decFloat * decFloatCopyNegate(decFloat *result, const decFloat *dfl) {
+ if (dfl!=result) *result=*dfl; /* copy needed */
+ DFBYTE(result, 0)^=0x80; /* invert sign bit */
+ return result;
+ } /* decFloatCopyNegate */
+
+/* ------------------------------------------------------------------ */
+/* decFloatCopySign -- copy a decFloat with the sign of another */
+/* */
+/* result gets the result of copying dfl with the sign of dfr */
+/* dfl is the first decFloat (lhs) */
+/* dfr is the second decFloat (rhs) */
+/* returns result */
+/* */
+/* This is a bitwise operation; no errors or exceptions are possible. */
+/* ------------------------------------------------------------------ */
+decFloat * decFloatCopySign(decFloat *result,
+ const decFloat *dfl, const decFloat *dfr) {
+ uByte sign=(uByte)(DFBYTE(dfr, 0)&0x80); /* save sign bit */
+ if (dfl!=result) *result=*dfl; /* copy needed */
+ DFBYTE(result, 0)&=~0x80; /* clear sign .. */
+ DFBYTE(result, 0)=(uByte)(DFBYTE(result, 0)|sign); /* .. and set saved */
+ return result;
+ } /* decFloatCopySign */
+
+/* ------------------------------------------------------------------ */
+/* decFloatDigits -- return the number of digits in a decFloat */
+/* */
+/* df is the decFloat to investigate */
+/* returns the number of significant digits in the decFloat; a */
+/* zero coefficient returns 1 as does an infinity (a NaN returns */
+/* the number of digits in the payload) */
+/* ------------------------------------------------------------------ */
+/* private macro to extract a declet according to provided formula */
+/* (form), and if it is non-zero then return the calculated digits */
+/* depending on the declet number (n), where n=0 for the most */
+/* significant declet; uses uInt dpd for work */
+#define dpdlenchk(n, form) {dpd=(form)&0x3ff; \
+ if (dpd) return (DECPMAX-1-3*(n))-(3-DPD2BCD8[dpd*4+3]);}
+/* next one is used when it is known that the declet must be */
+/* non-zero, or is the final zero declet */
+#define dpdlendun(n, form) {dpd=(form)&0x3ff; \
+ if (dpd==0) return 1; \
+ return (DECPMAX-1-3*(n))-(3-DPD2BCD8[dpd*4+3]);}
+
+uInt decFloatDigits(const decFloat *df) {
+ uInt dpd; /* work */
+ uInt sourhi=DFWORD(df, 0); /* top word from source decFloat */
+ #if QUAD
+ uInt sourmh, sourml;
+ #endif
+ uInt sourlo;
+
+ if (DFISINF(df)) return 1;
+ /* A NaN effectively has an MSD of 0; otherwise if non-zero MSD */
+ /* then the coefficient is full-length */
+ if (!DFISNAN(df) && DECCOMBMSD[sourhi>>26]) return DECPMAX;
+
+ #if DOUBLE
+ if (sourhi&0x0003ffff) { /* ends in first */
+ dpdlenchk(0, sourhi>>8);
+ sourlo=DFWORD(df, 1);
+ dpdlendun(1, (sourhi<<2) | (sourlo>>30));
+ } /* [cannot drop through] */
+ sourlo=DFWORD(df, 1); /* sourhi not involved now */
+ if (sourlo&0xfff00000) { /* in one of first two */
+ dpdlenchk(1, sourlo>>30); /* very rare */
+ dpdlendun(2, sourlo>>20);
+ } /* [cannot drop through] */
+ dpdlenchk(3, sourlo>>10);
+ dpdlendun(4, sourlo);
+ /* [cannot drop through] */
+
+ #elif QUAD
+ if (sourhi&0x00003fff) { /* ends in first */
+ dpdlenchk(0, sourhi>>4);
+ sourmh=DFWORD(df, 1);
+ dpdlendun(1, ((sourhi)<<6) | (sourmh>>26));
+ } /* [cannot drop through] */
+ sourmh=DFWORD(df, 1);
+ if (sourmh) {
+ dpdlenchk(1, sourmh>>26);
+ dpdlenchk(2, sourmh>>16);
+ dpdlenchk(3, sourmh>>6);
+ sourml=DFWORD(df, 2);
+ dpdlendun(4, ((sourmh)<<4) | (sourml>>28));
+ } /* [cannot drop through] */
+ sourml=DFWORD(df, 2);
+ if (sourml) {
+ dpdlenchk(4, sourml>>28);
+ dpdlenchk(5, sourml>>18);
+ dpdlenchk(6, sourml>>8);
+ sourlo=DFWORD(df, 3);
+ dpdlendun(7, ((sourml)<<2) | (sourlo>>30));
+ } /* [cannot drop through] */
+ sourlo=DFWORD(df, 3);
+ if (sourlo&0xfff00000) { /* in one of first two */
+ dpdlenchk(7, sourlo>>30); /* very rare */
+ dpdlendun(8, sourlo>>20);
+ } /* [cannot drop through] */
+ dpdlenchk(9, sourlo>>10);
+ dpdlendun(10, sourlo);
+ /* [cannot drop through] */
+ #endif
+ } /* decFloatDigits */
+
+/* ------------------------------------------------------------------ */
+/* decFloatDivide -- divide a decFloat by another */
+/* */
+/* result gets the result of dividing dfl by dfr: */
+/* dfl is the first decFloat (lhs) */
+/* dfr is the second decFloat (rhs) */
+/* set is the context */
+/* returns result */
+/* */
+/* ------------------------------------------------------------------ */
+/* This is just a wrapper. */
+decFloat * decFloatDivide(decFloat *result,
+ const decFloat *dfl, const decFloat *dfr,
+ decContext *set) {
+ return decDivide(result, dfl, dfr, set, DIVIDE);
+ } /* decFloatDivide */
+
+/* ------------------------------------------------------------------ */
+/* decFloatDivideInteger -- integer divide a decFloat by another */
+/* */
+/* result gets the result of dividing dfl by dfr: */
+/* dfl is the first decFloat (lhs) */
+/* dfr is the second decFloat (rhs) */
+/* set is the context */
+/* returns result */
+/* */
+/* ------------------------------------------------------------------ */
+decFloat * decFloatDivideInteger(decFloat *result,
+ const decFloat *dfl, const decFloat *dfr,
+ decContext *set) {
+ return decDivide(result, dfl, dfr, set, DIVIDEINT);
+ } /* decFloatDivideInteger */
+
+/* ------------------------------------------------------------------ */
+/* decFloatFMA -- multiply and add three decFloats, fused */
+/* */
+/* result gets the result of (dfl*dfr)+dff with a single rounding */
+/* dfl is the first decFloat (lhs) */
+/* dfr is the second decFloat (rhs) */
+/* dff is the final decFloat (fhs) */
+/* set is the context */
+/* returns result */
+/* */
+/* ------------------------------------------------------------------ */
+decFloat * decFloatFMA(decFloat *result, const decFloat *dfl,
+ const decFloat *dfr, const decFloat *dff,
+ decContext *set) {
+ /* The accumulator has the bytes needed for FiniteMultiply, plus */
+ /* one byte to the left in case of carry, plus DECPMAX+2 to the */
+ /* right for the final addition (up to full fhs + round & sticky) */
+ #define FMALEN (1+ (DECPMAX9*18) +DECPMAX+2)
+ uByte acc[FMALEN]; /* for multiplied coefficient in BCD */
+ /* .. and for final result */
+ bcdnum mul; /* for multiplication result */
+ bcdnum fin; /* for final operand, expanded */
+ uByte coe[DECPMAX]; /* dff coefficient in BCD */
+ bcdnum *hi, *lo; /* bcdnum with higher/lower exponent */
+ uInt diffsign; /* non-zero if signs differ */
+ uInt hipad; /* pad digit for hi if needed */
+ Int padding; /* excess exponent */
+ uInt carry; /* +1 for ten's complement and during add */
+ uByte *ub, *uh, *ul; /* work */
+
+ /* handle all the special values [any special operand leads to a */
+ /* special result] */
+ if (DFISSPECIAL(dfl) || DFISSPECIAL(dfr) || DFISSPECIAL(dff)) {
+ decFloat proxy; /* multiplication result proxy */
+ /* NaNs are handled as usual, giving priority to sNaNs */
+ if (DFISSNAN(dfl) || DFISSNAN(dfr)) return decNaNs(result, dfl, dfr, set);
+ if (DFISSNAN(dff)) return decNaNs(result, dff, NULL, set);
+ if (DFISNAN(dfl) || DFISNAN(dfr)) return decNaNs(result, dfl, dfr, set);
+ if (DFISNAN(dff)) return decNaNs(result, dff, NULL, set);
+ /* One or more of the three is infinite */
+ /* infinity times zero is bad */
+ decFloatZero(&proxy);
+ if (DFISINF(dfl)) {
+ if (DFISZERO(dfr)) return decInvalid(result, set);
+ decInfinity(&proxy, &proxy);
+ }
+ else if (DFISINF(dfr)) {
+ if (DFISZERO(dfl)) return decInvalid(result, set);
+ decInfinity(&proxy, &proxy);
+ }
+ /* compute sign of multiplication and place in proxy */
+ DFWORD(&proxy, 0)|=(DFWORD(dfl, 0)^DFWORD(dfr, 0))&DECFLOAT_Sign;
+ if (!DFISINF(dff)) return decFloatCopy(result, &proxy);
+ /* dff is Infinite */
+ if (!DFISINF(&proxy)) return decInfinity(result, dff);
+ /* both sides of addition are infinite; different sign is bad */
+ if ((DFWORD(dff, 0)&DECFLOAT_Sign)!=(DFWORD(&proxy, 0)&DECFLOAT_Sign))
+ return decInvalid(result, set);
+ return decFloatCopy(result, &proxy);
+ }
+
+ /* Here when all operands are finite */
+
+ /* First multiply dfl*dfr */
+ decFiniteMultiply(&mul, acc+1, dfl, dfr);
+ /* The multiply is complete, exact and unbounded, and described in */
+ /* mul with the coefficient held in acc[1...] */
+
+ /* now add in dff; the algorithm is essentially the same as */
+ /* decFloatAdd, but the code is different because the code there */
+ /* is highly optimized for adding two numbers of the same size */
+ fin.exponent=GETEXPUN(dff); /* get dff exponent and sign */
+ fin.sign=DFWORD(dff, 0)&DECFLOAT_Sign;
+ diffsign=mul.sign^fin.sign; /* note if signs differ */
+ fin.msd=coe;
+ fin.lsd=coe+DECPMAX-1;
+ GETCOEFF(dff, coe); /* extract the coefficient */
+
+ /* now set hi and lo so that hi points to whichever of mul and fin */
+ /* has the higher exponent and lo point to the other [don't care if */
+ /* the same] */
+ if (mul.exponent>=fin.exponent) {
+ hi=&mul;
+ lo=&fin;
+ }
+ else {
+ hi=&fin;
+ lo=&mul;
+ }
+
+ /* remove leading zeros on both operands; this will save time later */
+ /* and make testing for zero trivial */
+ for (; UINTAT(hi->msd)==0 && hi->msd+3<hi->lsd;) hi->msd+=4;
+ for (; *hi->msd==0 && hi->msd<hi->lsd;) hi->msd++;
+ for (; UINTAT(lo->msd)==0 && lo->msd+3<lo->lsd;) lo->msd+=4;
+ for (; *lo->msd==0 && lo->msd<lo->lsd;) lo->msd++;
+
+ /* if hi is zero then result will be lo (which has the smaller */
+ /* exponent), which also may need to be tested for zero for the */
+ /* weird IEEE 754 sign rules */
+ if (*hi->msd==0 && hi->msd==hi->lsd) { /* hi is zero */
+ /* "When the sum of two operands with opposite signs is */
+ /* exactly zero, the sign of that sum shall be '+' in all */
+ /* rounding modes except round toward -Infinity, in which */
+ /* mode that sign shall be '-'." */
+ if (diffsign) {
+ if (*lo->msd==0 && lo->msd==lo->lsd) { /* lo is zero */
+ lo->sign=0;
+ if (set->round==DEC_ROUND_FLOOR) lo->sign=DECFLOAT_Sign;
+ } /* diffsign && lo=0 */
+ } /* diffsign */
+ return decFinalize(result, lo, set); /* may need clamping */
+ } /* numfl is zero */
+ /* [here, both are minimal length and hi is non-zero] */
+
+ /* if signs differ, take the ten's complement of hi (zeros to the */
+ /* right do not matter because the complement of zero is zero); */
+ /* the +1 is done later, as part of the addition, inserted at the */
+ /* correct digit */
+ hipad=0;
+ carry=0;
+ if (diffsign) {
+ hipad=9;
+ carry=1;
+ /* exactly the correct number of digits must be inverted */
+ for (uh=hi->msd; uh<hi->lsd-3; uh+=4) UINTAT(uh)=0x09090909-UINTAT(uh);
+ for (; uh<=hi->lsd; uh++) *uh=(uByte)(0x09-*uh);
+ }
+
+ /* ready to add; note that hi has no leading zeros so gap */
+ /* calculation does not have to be as pessimistic as in decFloatAdd */
+ /* (this is much more like the arbitrary-precision algorithm in */
+ /* Rexx and decNumber) */
+
+ /* padding is the number of zeros that would need to be added to hi */
+ /* for its lsd to be aligned with the lsd of lo */
+ padding=hi->exponent-lo->exponent;
+ /* printf("FMA pad %ld\n", (LI)padding); */
+
+ /* the result of the addition will be built into the accumulator, */
+ /* starting from the far right; this could be either hi or lo */
+ ub=acc+FMALEN-1; /* where lsd of result will go */
+ ul=lo->lsd; /* lsd of rhs */
+
+ if (padding!=0) { /* unaligned */
+ /* if the msd of lo is more than DECPMAX+2 digits to the right of */
+ /* the original msd of hi then it can be reduced to a single */
+ /* digit at the right place, as it stays clear of hi digits */
+ /* [it must be DECPMAX+2 because during a subtraction the msd */
+ /* could become 0 after a borrow from 1.000 to 0.9999...] */
+ Int hilen=(Int)(hi->lsd-hi->msd+1); /* lengths */
+ Int lolen=(Int)(lo->lsd-lo->msd+1); /* .. */
+ Int newexp=MINI(hi->exponent, hi->exponent+hilen-DECPMAX)-3;
+ Int reduce=newexp-lo->exponent;
+ if (reduce>0) { /* [= case gives reduce=0 nop] */
+ /* printf("FMA reduce: %ld\n", (LI)reduce); */
+ if (reduce>=lolen) { /* eating all */
+ lo->lsd=lo->msd; /* reduce to single digit */
+ lo->exponent=newexp; /* [known to be non-zero] */
+ }
+ else { /* < */
+ uByte *up=lo->lsd;
+ lo->lsd=lo->lsd-reduce;
+ if (*lo->lsd==0) /* could need sticky bit */
+ for (; up>lo->lsd; up--) { /* search discarded digits */
+ if (*up!=0) { /* found one... */
+ *lo->lsd=1; /* set sticky bit */
+ break;
+ }
+ }
+ lo->exponent+=reduce;
+ }
+ padding=hi->exponent-lo->exponent; /* recalculate */
+ ul=lo->lsd; /* .. */
+ } /* maybe reduce */
+ /* padding is now <= DECPMAX+2 but still > 0; tricky DOUBLE case */
+ /* is when hi is a 1 that will become a 0.9999... by subtraction: */
+ /* hi: 1 E+16 */
+ /* lo: .................1000000000000000 E-16 */
+ /* which for the addition pads and reduces to: */
+ /* hi: 1000000000000000000 E-2 */
+ /* lo: .................1 E-2 */
+ #if DECCHECK
+ if (padding>DECPMAX+2) printf("FMA excess padding: %ld\n", (LI)padding);
+ if (padding<=0) printf("FMA low padding: %ld\n", (LI)padding);
+ /* printf("FMA padding: %ld\n", (LI)padding); */
+ #endif
+ /* padding digits can now be set in the result; one or more of */
+ /* these will come from lo; others will be zeros in the gap */
+ for (; ul>=lo->msd && padding>0; padding--, ul--, ub--) *ub=*ul;
+ for (;padding>0; padding--, ub--) *ub=0; /* mind the gap */
+ }
+
+ /* addition now complete to the right of the rightmost digit of hi */
+ uh=hi->lsd;
+
+ /* carry was set up depending on ten's complement above; do the add... */
+ for (;; ub--) {
+ uInt hid, lod;
+ if (uh<hi->msd) {
+ if (ul<lo->msd) break;
+ hid=hipad;
+ }
+ else hid=*uh--;
+ if (ul<lo->msd) lod=0;
+ else lod=*ul--;
+ *ub=(uByte)(carry+hid+lod);
+ if (*ub<10) carry=0;
+ else {
+ *ub-=10;
+ carry=1;
+ }
+ } /* addition loop */
+
+ /* addition complete -- now handle carry, borrow, etc. */
+ /* use lo to set up the num (its exponent is already correct, and */
+ /* sign usually is) */
+ lo->msd=ub+1;
+ lo->lsd=acc+FMALEN-1;
+ /* decShowNum(lo, "lo"); */
+ if (!diffsign) { /* same-sign addition */
+ if (carry) { /* carry out */
+ *ub=1; /* place the 1 .. */
+ lo->msd--; /* .. and update */
+ }
+ } /* same sign */
+ else { /* signs differed (subtraction) */
+ if (!carry) { /* no carry out means hi<lo */
+ /* borrowed -- take ten's complement of the right digits */
+ lo->sign=hi->sign; /* sign is lhs sign */
+ for (ul=lo->msd; ul<lo->lsd-3; ul+=4) UINTAT(ul)=0x09090909-UINTAT(ul);
+ for (; ul<=lo->lsd; ul++) *ul=(uByte)(0x09-*ul); /* [leaves ul at lsd+1] */
+ /* complete the ten's complement by adding 1 [cannot overrun] */
+ for (ul--; *ul==9; ul--) *ul=0;
+ *ul+=1;
+ } /* borrowed */
+ else { /* carry out means hi>=lo */
+ /* sign to use is lo->sign */
+ /* all done except for the special IEEE 754 exact-zero-result */
+ /* rule (see above); while testing for zero, strip leading */
+ /* zeros (which will save decFinalize doing it) */
+ for (; UINTAT(lo->msd)==0 && lo->msd+3<lo->lsd;) lo->msd+=4;
+ for (; *lo->msd==0 && lo->msd<lo->lsd;) lo->msd++;
+ if (*lo->msd==0) { /* must be true zero (and diffsign) */
+ lo->sign=0; /* assume + */
+ if (set->round==DEC_ROUND_FLOOR) lo->sign=DECFLOAT_Sign;
+ }
+ /* [else was not zero, might still have leading zeros] */
+ } /* subtraction gave positive result */
+ } /* diffsign */
+
+ return decFinalize(result, lo, set); /* round, check, and lay out */
+ } /* decFloatFMA */
+
+/* ------------------------------------------------------------------ */
+/* decFloatFromInt -- initialise a decFloat from an Int */
+/* */
+/* result gets the converted Int */
+/* n is the Int to convert */
+/* returns result */
+/* */
+/* The result is Exact; no errors or exceptions are possible. */
+/* ------------------------------------------------------------------ */
+decFloat * decFloatFromInt32(decFloat *result, Int n) {
+ uInt u=(uInt)n; /* copy as bits */
+ uInt encode; /* work */
+ DFWORD(result, 0)=ZEROWORD; /* always */
+ #if QUAD
+ DFWORD(result, 1)=0;
+ DFWORD(result, 2)=0;
+ #endif
+ if (n<0) { /* handle -n with care */
+ /* [This can be done without the test, but is then slightly slower] */
+ u=(~u)+1;
+ DFWORD(result, 0)|=DECFLOAT_Sign;
+ }
+ /* Since the maximum value of u now is 2**31, only the low word of */
+ /* result is affected */
+ encode=BIN2DPD[u%1000];
+ u/=1000;
+ encode|=BIN2DPD[u%1000]<<10;
+ u/=1000;
+ encode|=BIN2DPD[u%1000]<<20;
+ u/=1000; /* now 0, 1, or 2 */
+ encode|=u<<30;
+ DFWORD(result, DECWORDS-1)=encode;
+ return result;
+ } /* decFloatFromInt32 */
+
+/* ------------------------------------------------------------------ */
+/* decFloatFromUInt -- initialise a decFloat from a uInt */
+/* */
+/* result gets the converted uInt */
+/* n is the uInt to convert */
+/* returns result */
+/* */
+/* The result is Exact; no errors or exceptions are possible. */
+/* ------------------------------------------------------------------ */
+decFloat * decFloatFromUInt32(decFloat *result, uInt u) {
+ uInt encode; /* work */
+ DFWORD(result, 0)=ZEROWORD; /* always */
+ #if QUAD
+ DFWORD(result, 1)=0;
+ DFWORD(result, 2)=0;
+ #endif
+ encode=BIN2DPD[u%1000];
+ u/=1000;
+ encode|=BIN2DPD[u%1000]<<10;
+ u/=1000;
+ encode|=BIN2DPD[u%1000]<<20;
+ u/=1000; /* now 0 -> 4 */
+ encode|=u<<30;
+ DFWORD(result, DECWORDS-1)=encode;
+ DFWORD(result, DECWORDS-2)|=u>>2; /* rarely non-zero */
+ return result;
+ } /* decFloatFromUInt32 */
+
+/* ------------------------------------------------------------------ */
+/* decFloatInvert -- logical digitwise INVERT of a decFloat */
+/* */
+/* result gets the result of INVERTing df */
+/* df is the decFloat to invert */
+/* set is the context */
+/* returns result, which will be canonical with sign=0 */
+/* */
+/* The operand must be positive, finite with exponent q=0, and */
+/* comprise just zeros and ones; if not, Invalid operation results. */
+/* ------------------------------------------------------------------ */
+decFloat * decFloatInvert(decFloat *result, const decFloat *df,
+ decContext *set) {
+ uInt sourhi=DFWORD(df, 0); /* top word of dfs */
+
+ if (!DFISUINT01(df) || !DFISCC01(df)) return decInvalid(result, set);
+ /* the operand is a finite integer (q=0) */
+ #if DOUBLE
+ DFWORD(result, 0)=ZEROWORD|((~sourhi)&0x04009124);
+ DFWORD(result, 1)=(~DFWORD(df, 1)) &0x49124491;
+ #elif QUAD
+ DFWORD(result, 0)=ZEROWORD|((~sourhi)&0x04000912);
+ DFWORD(result, 1)=(~DFWORD(df, 1)) &0x44912449;
+ DFWORD(result, 2)=(~DFWORD(df, 2)) &0x12449124;
+ DFWORD(result, 3)=(~DFWORD(df, 3)) &0x49124491;
+ #endif
+ return result;
+ } /* decFloatInvert */
+
+/* ------------------------------------------------------------------ */
+/* decFloatIs -- decFloat tests (IsSigned, etc.) */
+/* */
+/* df is the decFloat to test */
+/* returns 0 or 1 in an int32_t */
+/* */
+/* Many of these could be macros, but having them as real functions */
+/* is a bit cleaner (and they can be referred to here by the generic */
+/* names) */
+/* ------------------------------------------------------------------ */
+uInt decFloatIsCanonical(const decFloat *df) {
+ if (DFISSPECIAL(df)) {
+ if (DFISINF(df)) {
+ if (DFWORD(df, 0)&ECONMASK) return 0; /* exponent continuation */
+ if (!DFISCCZERO(df)) return 0; /* coefficient continuation */
+ return 1;
+ }
+ /* is a NaN */
+ if (DFWORD(df, 0)&ECONNANMASK) return 0; /* exponent continuation */
+ if (DFISCCZERO(df)) return 1; /* coefficient continuation */
+ /* drop through to check payload */
+ }
+ { /* declare block */
+ #if DOUBLE
+ uInt sourhi=DFWORD(df, 0);
+ uInt sourlo=DFWORD(df, 1);
+ if (CANONDPDOFF(sourhi, 8)
+ && CANONDPDTWO(sourhi, sourlo, 30)
+ && CANONDPDOFF(sourlo, 20)
+ && CANONDPDOFF(sourlo, 10)
+ && CANONDPDOFF(sourlo, 0)) return 1;
+ #elif QUAD
+ uInt sourhi=DFWORD(df, 0);
+ uInt sourmh=DFWORD(df, 1);
+ uInt sourml=DFWORD(df, 2);
+ uInt sourlo=DFWORD(df, 3);
+ if (CANONDPDOFF(sourhi, 4)
+ && CANONDPDTWO(sourhi, sourmh, 26)
+ && CANONDPDOFF(sourmh, 16)
+ && CANONDPDOFF(sourmh, 6)
+ && CANONDPDTWO(sourmh, sourml, 28)
+ && CANONDPDOFF(sourml, 18)
+ && CANONDPDOFF(sourml, 8)
+ && CANONDPDTWO(sourml, sourlo, 30)
+ && CANONDPDOFF(sourlo, 20)
+ && CANONDPDOFF(sourlo, 10)
+ && CANONDPDOFF(sourlo, 0)) return 1;
+ #endif
+ } /* block */
+ return 0; /* a declet is non-canonical */
+ }
+
+uInt decFloatIsFinite(const decFloat *df) {
+ return !DFISSPECIAL(df);
+ }
+uInt decFloatIsInfinite(const decFloat *df) {
+ return DFISINF(df);
+ }
+uInt decFloatIsInteger(const decFloat *df) {
+ return DFISINT(df);
+ }
+uInt decFloatIsNaN(const decFloat *df) {
+ return DFISNAN(df);
+ }
+uInt decFloatIsNormal(const decFloat *df) {
+ Int exp; /* exponent */
+ if (DFISSPECIAL(df)) return 0;
+ if (DFISZERO(df)) return 0;
+ /* is finite and non-zero */
+ exp=GETEXPUN(df) /* get unbiased exponent .. */
+ +decFloatDigits(df)-1; /* .. and make adjusted exponent */
+ return (exp>=DECEMIN); /* < DECEMIN is subnormal */
+ }
+uInt decFloatIsSignaling(const decFloat *df) {
+ return DFISSNAN(df);
+ }
+uInt decFloatIsSignalling(const decFloat *df) {
+ return DFISSNAN(df);
+ }
+uInt decFloatIsSigned(const decFloat *df) {
+ return DFISSIGNED(df);
+ }
+uInt decFloatIsSubnormal(const decFloat *df) {
+ if (DFISSPECIAL(df)) return 0;
+ /* is finite */
+ if (decFloatIsNormal(df)) return 0;
+ /* it is <Nmin, but could be zero */
+ if (DFISZERO(df)) return 0;
+ return 1; /* is subnormal */
+ }
+uInt decFloatIsZero(const decFloat *df) {
+ return DFISZERO(df);
+ } /* decFloatIs... */
+
+/* ------------------------------------------------------------------ */
+/* decFloatLogB -- return adjusted exponent, by 754r rules */
+/* */
+/* result gets the adjusted exponent as an integer, or a NaN etc. */
+/* df is the decFloat to be examined */
+/* set is the context */
+/* returns result */
+/* */
+/* Notable cases: */
+/* A<0 -> Use |A| */
+/* A=0 -> -Infinity (Division by zero) */
+/* A=Infinite -> +Infinity (Exact) */
+/* A=1 exactly -> 0 (Exact) */
+/* NaNs are propagated as usual */
+/* ------------------------------------------------------------------ */
+decFloat * decFloatLogB(decFloat *result, const decFloat *df,
+ decContext *set) {
+ Int ae; /* adjusted exponent */
+ if (DFISNAN(df)) return decNaNs(result, df, NULL, set);
+ if (DFISINF(df)) {
+ DFWORD(result, 0)=0; /* need +ve */
+ return decInfinity(result, result); /* canonical +Infinity */
+ }
+ if (DFISZERO(df)) {
+ set->status|=DEC_Division_by_zero; /* as per 754r */
+ DFWORD(result, 0)=DECFLOAT_Sign; /* make negative */
+ return decInfinity(result, result); /* canonical -Infinity */
+ }
+ ae=GETEXPUN(df) /* get unbiased exponent .. */
+ +decFloatDigits(df)-1; /* .. and make adjusted exponent */
+ /* ae has limited range (3 digits for DOUBLE and 4 for QUAD), so */
+ /* it is worth using a special case of decFloatFromInt32 */
+ DFWORD(result, 0)=ZEROWORD; /* always */
+ if (ae<0) {
+ DFWORD(result, 0)|=DECFLOAT_Sign; /* -0 so far */
+ ae=-ae;
+ }
+ #if DOUBLE
+ DFWORD(result, 1)=BIN2DPD[ae]; /* a single declet */
+ #elif QUAD
+ DFWORD(result, 1)=0;
+ DFWORD(result, 2)=0;
+ DFWORD(result, 3)=(ae/1000)<<10; /* is <10, so need no DPD encode */
+ DFWORD(result, 3)|=BIN2DPD[ae%1000];
+ #endif
+ return result;
+ } /* decFloatLogB */
+
+/* ------------------------------------------------------------------ */
+/* decFloatMax -- return maxnum of two operands */
+/* */
+/* result gets the chosen decFloat */
+/* dfl is the first decFloat (lhs) */
+/* dfr is the second decFloat (rhs) */
+/* set is the context */
+/* returns result */
+/* */
+/* If just one operand is a quiet NaN it is ignored. */
+/* ------------------------------------------------------------------ */
+decFloat * decFloatMax(decFloat *result,
+ const decFloat *dfl, const decFloat *dfr,
+ decContext *set) {
+ Int comp;
+ if (DFISNAN(dfl)) {
+ /* sNaN or both NaNs leads to normal NaN processing */
+ if (DFISNAN(dfr) || DFISSNAN(dfl)) return decNaNs(result, dfl, dfr, set);
+ return decCanonical(result, dfr); /* RHS is numeric */
+ }
+ if (DFISNAN(dfr)) {
+ /* sNaN leads to normal NaN processing (both NaN handled above) */
+ if (DFISSNAN(dfr)) return decNaNs(result, dfl, dfr, set);
+ return decCanonical(result, dfl); /* LHS is numeric */
+ }
+ /* Both operands are numeric; numeric comparison needed -- use */
+ /* total order for a well-defined choice (and +0 > -0) */
+ comp=decNumCompare(dfl, dfr, 1);
+ if (comp>=0) return decCanonical(result, dfl);
+ return decCanonical(result, dfr);
+ } /* decFloatMax */
+
+/* ------------------------------------------------------------------ */
+/* decFloatMaxMag -- return maxnummag of two operands */
+/* */
+/* result gets the chosen decFloat */
+/* dfl is the first decFloat (lhs) */
+/* dfr is the second decFloat (rhs) */
+/* set is the context */
+/* returns result */
+/* */
+/* Returns according to the magnitude comparisons if both numeric and */
+/* unequal, otherwise returns maxnum */
+/* ------------------------------------------------------------------ */
+decFloat * decFloatMaxMag(decFloat *result,
+ const decFloat *dfl, const decFloat *dfr,
+ decContext *set) {
+ Int comp;
+ decFloat absl, absr;
+ if (DFISNAN(dfl) || DFISNAN(dfr)) return decFloatMax(result, dfl, dfr, set);
+
+ decFloatCopyAbs(&absl, dfl);
+ decFloatCopyAbs(&absr, dfr);
+ comp=decNumCompare(&absl, &absr, 0);
+ if (comp>0) return decCanonical(result, dfl);
+ if (comp<0) return decCanonical(result, dfr);
+ return decFloatMax(result, dfl, dfr, set);
+ } /* decFloatMaxMag */
+
+/* ------------------------------------------------------------------ */
+/* decFloatMin -- return minnum of two operands */
+/* */
+/* result gets the chosen decFloat */
+/* dfl is the first decFloat (lhs) */
+/* dfr is the second decFloat (rhs) */
+/* set is the context */
+/* returns result */
+/* */
+/* If just one operand is a quiet NaN it is ignored. */
+/* ------------------------------------------------------------------ */
+decFloat * decFloatMin(decFloat *result,
+ const decFloat *dfl, const decFloat *dfr,
+ decContext *set) {
+ Int comp;
+ if (DFISNAN(dfl)) {
+ /* sNaN or both NaNs leads to normal NaN processing */
+ if (DFISNAN(dfr) || DFISSNAN(dfl)) return decNaNs(result, dfl, dfr, set);
+ return decCanonical(result, dfr); /* RHS is numeric */
+ }
+ if (DFISNAN(dfr)) {
+ /* sNaN leads to normal NaN processing (both NaN handled above) */
+ if (DFISSNAN(dfr)) return decNaNs(result, dfl, dfr, set);
+ return decCanonical(result, dfl); /* LHS is numeric */
+ }
+ /* Both operands are numeric; numeric comparison needed -- use */
+ /* total order for a well-defined choice (and +0 > -0) */
+ comp=decNumCompare(dfl, dfr, 1);
+ if (comp<=0) return decCanonical(result, dfl);
+ return decCanonical(result, dfr);
+ } /* decFloatMin */
+
+/* ------------------------------------------------------------------ */
+/* decFloatMinMag -- return minnummag of two operands */
+/* */
+/* result gets the chosen decFloat */
+/* dfl is the first decFloat (lhs) */
+/* dfr is the second decFloat (rhs) */
+/* set is the context */
+/* returns result */
+/* */
+/* Returns according to the magnitude comparisons if both numeric and */
+/* unequal, otherwise returns minnum */
+/* ------------------------------------------------------------------ */
+decFloat * decFloatMinMag(decFloat *result,
+ const decFloat *dfl, const decFloat *dfr,
+ decContext *set) {
+ Int comp;
+ decFloat absl, absr;
+ if (DFISNAN(dfl) || DFISNAN(dfr)) return decFloatMin(result, dfl, dfr, set);
+
+ decFloatCopyAbs(&absl, dfl);
+ decFloatCopyAbs(&absr, dfr);
+ comp=decNumCompare(&absl, &absr, 0);
+ if (comp<0) return decCanonical(result, dfl);
+ if (comp>0) return decCanonical(result, dfr);
+ return decFloatMin(result, dfl, dfr, set);
+ } /* decFloatMinMag */
+
+/* ------------------------------------------------------------------ */
+/* decFloatMinus -- negate value, heeding NaNs, etc. */
+/* */
+/* result gets the canonicalized 0-df */
+/* df is the decFloat to minus */
+/* set is the context */
+/* returns result */
+/* */
+/* This has the same effect as 0-df where the exponent of the zero is */
+/* the same as that of df (if df is finite). */
+/* The effect is also the same as decFloatCopyNegate except that NaNs */
+/* are handled normally (the sign of a NaN is not affected, and an */
+/* sNaN will signal), the result is canonical, and zero gets sign 0. */
+/* ------------------------------------------------------------------ */
+decFloat * decFloatMinus(decFloat *result, const decFloat *df,
+ decContext *set) {
+ if (DFISNAN(df)) return decNaNs(result, df, NULL, set);
+ decCanonical(result, df); /* copy and check */
+ if (DFISZERO(df)) DFBYTE(result, 0)&=~0x80; /* turn off sign bit */
+ else DFBYTE(result, 0)^=0x80; /* flip sign bit */
+ return result;
+ } /* decFloatMinus */
+
+/* ------------------------------------------------------------------ */
+/* decFloatMultiply -- multiply two decFloats */
+/* */
+/* result gets the result of multiplying dfl and dfr: */
+/* dfl is the first decFloat (lhs) */
+/* dfr is the second decFloat (rhs) */
+/* set is the context */
+/* returns result */
+/* */
+/* ------------------------------------------------------------------ */
+decFloat * decFloatMultiply(decFloat *result,
+ const decFloat *dfl, const decFloat *dfr,
+ decContext *set) {
+ bcdnum num; /* for final conversion */
+ uByte bcdacc[DECPMAX9*18+1]; /* for coefficent in BCD */
+
+ if (DFISSPECIAL(dfl) || DFISSPECIAL(dfr)) { /* either is special? */
+ /* NaNs are handled as usual */
+ if (DFISNAN(dfl) || DFISNAN(dfr)) return decNaNs(result, dfl, dfr, set);
+ /* infinity times zero is bad */
+ if (DFISINF(dfl) && DFISZERO(dfr)) return decInvalid(result, set);
+ if (DFISINF(dfr) && DFISZERO(dfl)) return decInvalid(result, set);
+ /* both infinite; return canonical infinity with computed sign */
+ DFWORD(result, 0)=DFWORD(dfl, 0)^DFWORD(dfr, 0); /* compute sign */
+ return decInfinity(result, result);
+ }
+
+ /* Here when both operands are finite */
+ decFiniteMultiply(&num, bcdacc, dfl, dfr);
+ return decFinalize(result, &num, set); /* round, check, and lay out */
+ } /* decFloatMultiply */
+
+/* ------------------------------------------------------------------ */
+/* decFloatNextMinus -- next towards -Infinity */
+/* */
+/* result gets the next lesser decFloat */
+/* dfl is the decFloat to start with */
+/* set is the context */
+/* returns result */
+/* */
+/* This is 754r nextdown; Invalid is the only status possible (from */
+/* an sNaN). */
+/* ------------------------------------------------------------------ */
+decFloat * decFloatNextMinus(decFloat *result, const decFloat *dfl,
+ decContext *set) {
+ decFloat delta; /* tiny increment */
+ uInt savestat; /* saves status */
+ enum rounding saveround; /* .. and mode */
+
+ /* +Infinity is the special case */
+ if (DFISINF(dfl) && !DFISSIGNED(dfl)) {
+ DFSETNMAX(result);
+ return result; /* [no status to set] */
+ }
+ /* other cases are effected by sutracting a tiny delta -- this */
+ /* should be done in a wider format as the delta is unrepresentable */
+ /* here (but can be done with normal add if the sign of zero is */
+ /* treated carefully, because no Inexactitude is interesting); */
+ /* rounding to -Infinity then pushes the result to next below */
+ decFloatZero(&delta); /* set up tiny delta */
+ DFWORD(&delta, DECWORDS-1)=1; /* coefficient=1 */
+ DFWORD(&delta, 0)=DECFLOAT_Sign; /* Sign=1 + biased exponent=0 */
+ /* set up for the directional round */
+ saveround=set->round; /* save mode */
+ set->round=DEC_ROUND_FLOOR; /* .. round towards -Infinity */
+ savestat=set->status; /* save status */
+ decFloatAdd(result, dfl, &delta, set);
+ /* Add rules mess up the sign when going from +Ntiny to 0 */
+ if (DFISZERO(result)) DFWORD(result, 0)^=DECFLOAT_Sign; /* correct */
+ set->status&=DEC_Invalid_operation; /* preserve only sNaN status */
+ set->status|=savestat; /* restore pending flags */
+ set->round=saveround; /* .. and mode */
+ return result;
+ } /* decFloatNextMinus */
+
+/* ------------------------------------------------------------------ */
+/* decFloatNextPlus -- next towards +Infinity */
+/* */
+/* result gets the next larger decFloat */
+/* dfl is the decFloat to start with */
+/* set is the context */
+/* returns result */
+/* */
+/* This is 754r nextup; Invalid is the only status possible (from */
+/* an sNaN). */
+/* ------------------------------------------------------------------ */
+decFloat * decFloatNextPlus(decFloat *result, const decFloat *dfl,
+ decContext *set) {
+ uInt savestat; /* saves status */
+ enum rounding saveround; /* .. and mode */
+ decFloat delta; /* tiny increment */
+
+ /* -Infinity is the special case */
+ if (DFISINF(dfl) && DFISSIGNED(dfl)) {
+ DFSETNMAX(result);
+ DFWORD(result, 0)|=DECFLOAT_Sign; /* make negative */
+ return result; /* [no status to set] */
+ }
+ /* other cases are effected by sutracting a tiny delta -- this */
+ /* should be done in a wider format as the delta is unrepresentable */
+ /* here (but can be done with normal add if the sign of zero is */
+ /* treated carefully, because no Inexactitude is interesting); */
+ /* rounding to +Infinity then pushes the result to next above */
+ decFloatZero(&delta); /* set up tiny delta */
+ DFWORD(&delta, DECWORDS-1)=1; /* coefficient=1 */
+ DFWORD(&delta, 0)=0; /* Sign=0 + biased exponent=0 */
+ /* set up for the directional round */
+ saveround=set->round; /* save mode */
+ set->round=DEC_ROUND_CEILING; /* .. round towards +Infinity */
+ savestat=set->status; /* save status */
+ decFloatAdd(result, dfl, &delta, set);
+ /* Add rules mess up the sign when going from -Ntiny to -0 */
+ if (DFISZERO(result)) DFWORD(result, 0)^=DECFLOAT_Sign; /* correct */
+ set->status&=DEC_Invalid_operation; /* preserve only sNaN status */
+ set->status|=savestat; /* restore pending flags */
+ set->round=saveround; /* .. and mode */
+ return result;
+ } /* decFloatNextPlus */
+
+/* ------------------------------------------------------------------ */
+/* decFloatNextToward -- next towards a decFloat */
+/* */
+/* result gets the next decFloat */
+/* dfl is the decFloat to start with */
+/* dfr is the decFloat to move toward */
+/* set is the context */
+/* returns result */
+/* */
+/* This is 754r nextafter; status may be set unless the result is a */
+/* normal number. */
+/* ------------------------------------------------------------------ */
+decFloat * decFloatNextToward(decFloat *result,
+ const decFloat *dfl, const decFloat *dfr,
+ decContext *set) {
+ decFloat delta; /* tiny increment or decrement */
+ decFloat pointone; /* 1e-1 */
+ uInt savestat; /* saves status */
+ enum rounding saveround; /* .. and mode */
+ uInt deltatop; /* top word for delta */
+ Int comp; /* work */
+
+ if (DFISNAN(dfl) || DFISNAN(dfr)) return decNaNs(result, dfl, dfr, set);
+ /* Both are numeric, so Invalid no longer a possibility */
+ comp=decNumCompare(dfl, dfr, 0);
+ if (comp==0) return decFloatCopySign(result, dfl, dfr); /* equal */
+ /* unequal; do NextPlus or NextMinus but with different status rules */
+
+ if (comp<0) { /* lhs<rhs, do NextPlus, see above for commentary */
+ if (DFISINF(dfl) && DFISSIGNED(dfl)) { /* -Infinity special case */
+ DFSETNMAX(result);
+ DFWORD(result, 0)|=DECFLOAT_Sign;
+ return result;
+ }
+ saveround=set->round; /* save mode */
+ set->round=DEC_ROUND_CEILING; /* .. round towards +Infinity */
+ deltatop=0; /* positive delta */
+ }
+ else { /* lhs>rhs, do NextMinus, see above for commentary */
+ if (DFISINF(dfl) && !DFISSIGNED(dfl)) { /* +Infinity special case */
+ DFSETNMAX(result);
+ return result;
+ }
+ saveround=set->round; /* save mode */
+ set->round=DEC_ROUND_FLOOR; /* .. round towards -Infinity */
+ deltatop=DECFLOAT_Sign; /* negative delta */
+ }
+ savestat=set->status; /* save status */
+ /* Here, Inexact is needed where appropriate (and hence Underflow, */
+ /* etc.). Therefore the tiny delta which is otherwise */
+ /* unrepresentable (see NextPlus and NextMinus) is constructed */
+ /* using the multiplication of FMA. */
+ decFloatZero(&delta); /* set up tiny delta */
+ DFWORD(&delta, DECWORDS-1)=1; /* coefficient=1 */
+ DFWORD(&delta, 0)=deltatop; /* Sign + biased exponent=0 */
+ decFloatFromString(&pointone, "1E-1", set); /* set up multiplier */
+ decFloatFMA(result, &delta, &pointone, dfl, set);
+ /* [Delta is truly tiny, so no need to correct sign of zero] */
+ /* use new status unless the result is normal */
+ if (decFloatIsNormal(result)) set->status=savestat; /* else goes forward */
+ set->round=saveround; /* restore mode */
+ return result;
+ } /* decFloatNextToward */
+
+/* ------------------------------------------------------------------ */
+/* decFloatOr -- logical digitwise OR of two decFloats */
+/* */
+/* result gets the result of ORing dfl and dfr */
+/* dfl is the first decFloat (lhs) */
+/* dfr is the second decFloat (rhs) */
+/* set is the context */
+/* returns result, which will be canonical with sign=0 */
+/* */
+/* The operands must be positive, finite with exponent q=0, and */
+/* comprise just zeros and ones; if not, Invalid operation results. */
+/* ------------------------------------------------------------------ */
+decFloat * decFloatOr(decFloat *result,
+ const decFloat *dfl, const decFloat *dfr,
+ decContext *set) {
+ if (!DFISUINT01(dfl) || !DFISUINT01(dfr)
+ || !DFISCC01(dfl) || !DFISCC01(dfr)) return decInvalid(result, set);
+ /* the operands are positive finite integers (q=0) with just 0s and 1s */
+ #if DOUBLE
+ DFWORD(result, 0)=ZEROWORD
+ |((DFWORD(dfl, 0) | DFWORD(dfr, 0))&0x04009124);
+ DFWORD(result, 1)=(DFWORD(dfl, 1) | DFWORD(dfr, 1))&0x49124491;
+ #elif QUAD
+ DFWORD(result, 0)=ZEROWORD
+ |((DFWORD(dfl, 0) | DFWORD(dfr, 0))&0x04000912);
+ DFWORD(result, 1)=(DFWORD(dfl, 1) | DFWORD(dfr, 1))&0x44912449;
+ DFWORD(result, 2)=(DFWORD(dfl, 2) | DFWORD(dfr, 2))&0x12449124;
+ DFWORD(result, 3)=(DFWORD(dfl, 3) | DFWORD(dfr, 3))&0x49124491;
+ #endif
+ return result;
+ } /* decFloatOr */
+
+/* ------------------------------------------------------------------ */
+/* decFloatPlus -- add value to 0, heeding NaNs, etc. */
+/* */
+/* result gets the canonicalized 0+df */
+/* df is the decFloat to plus */
+/* set is the context */
+/* returns result */
+/* */
+/* This has the same effect as 0+df where the exponent of the zero is */
+/* the same as that of df (if df is finite). */
+/* The effect is also the same as decFloatCopy except that NaNs */
+/* are handled normally (the sign of a NaN is not affected, and an */
+/* sNaN will signal), the result is canonical, and zero gets sign 0. */
+/* ------------------------------------------------------------------ */
+decFloat * decFloatPlus(decFloat *result, const decFloat *df,
+ decContext *set) {
+ if (DFISNAN(df)) return decNaNs(result, df, NULL, set);
+ decCanonical(result, df); /* copy and check */
+ if (DFISZERO(df)) DFBYTE(result, 0)&=~0x80; /* turn off sign bit */
+ return result;
+ } /* decFloatPlus */
+
+/* ------------------------------------------------------------------ */
+/* decFloatQuantize -- quantize a decFloat */
+/* */
+/* result gets the result of quantizing dfl to match dfr */
+/* dfl is the first decFloat (lhs) */
+/* dfr is the second decFloat (rhs), which sets the exponent */
+/* set is the context */
+/* returns result */
+/* */
+/* Unless there is an error or the result is infinite, the exponent */
+/* of result is guaranteed to be the same as that of dfr. */
+/* ------------------------------------------------------------------ */
+decFloat * decFloatQuantize(decFloat *result,
+ const decFloat *dfl, const decFloat *dfr,
+ decContext *set) {
+ Int explb, exprb; /* left and right biased exponents */
+ uByte *ulsd; /* local LSD pointer */
+ uInt *ui; /* work */
+ uByte *ub; /* .. */
+ Int drop; /* .. */
+ uInt dpd; /* .. */
+ uInt encode; /* encoding accumulator */
+ uInt sourhil, sourhir; /* top words from source decFloats */
+ /* the following buffer holds the coefficient for manipulation */
+ uByte buf[4+DECPMAX*3]; /* + space for zeros to left or right */
+ #if DECTRACE
+ bcdnum num; /* for trace displays */
+ #endif
+
+ /* Start decoding the arguments */
+ sourhil=DFWORD(dfl, 0); /* LHS top word */
+ explb=DECCOMBEXP[sourhil>>26]; /* get exponent high bits (in place) */
+ sourhir=DFWORD(dfr, 0); /* RHS top word */
+ exprb=DECCOMBEXP[sourhir>>26];
+
+ if (EXPISSPECIAL(explb | exprb)) { /* either is special? */
+ /* NaNs are handled as usual */
+ if (DFISNAN(dfl) || DFISNAN(dfr)) return decNaNs(result, dfl, dfr, set);
+ /* one infinity but not both is bad */
+ if (DFISINF(dfl)!=DFISINF(dfr)) return decInvalid(result, set);
+ /* both infinite; return canonical infinity with sign of LHS */
+ return decInfinity(result, dfl);
+ }
+
+ /* Here when both arguments are finite */
+ /* complete extraction of the exponents [no need to unbias] */
+ explb+=GETECON(dfl); /* + continuation */
+ exprb+=GETECON(dfr); /* .. */
+
+ /* calculate the number of digits to drop from the coefficient */
+ drop=exprb-explb; /* 0 if nothing to do */
+ if (drop==0) return decCanonical(result, dfl); /* return canonical */
+
+ /* the coefficient is needed; lay it out into buf, offset so zeros */
+ /* can be added before or after as needed -- an extra heading is */
+ /* added so can safely pad Quad DECPMAX-1 zeros to the left by */
+ /* fours */
+ #define BUFOFF (buf+4+DECPMAX)
+ GETCOEFF(dfl, BUFOFF); /* decode from decFloat */
+ /* [now the msd is at BUFOFF and the lsd is at BUFOFF+DECPMAX-1] */
+
+ #if DECTRACE
+ num.msd=BUFOFF;
+ num.lsd=BUFOFF+DECPMAX-1;
+ num.exponent=explb-DECBIAS;
+ num.sign=sourhil & DECFLOAT_Sign;
+ decShowNum(&num, "dfl");
+ #endif
+
+ if (drop>0) { /* [most common case] */
+ /* (this code is very similar to that in decFloatFinalize, but */
+ /* has many differences so is duplicated here -- so any changes */
+ /* may need to be made there, too) */
+ uByte *roundat; /* -> re-round digit */
+ uByte reround; /* reround value */
+ /* printf("Rounding; drop=%ld\n", (LI)drop); */
+
+ /* there is at least one zero needed to the left, in all but one */
+ /* exceptional (all-nines) case, so place four zeros now; this is */
+ /* needed almost always and makes rounding all-nines by fours safe */
+ UINTAT(BUFOFF-4)=0;
+
+ /* Three cases here: */
+ /* 1. new LSD is in coefficient (almost always) */
+ /* 2. new LSD is digit to left of coefficient (so MSD is */
+ /* round-for-reround digit) */
+ /* 3. new LSD is to left of case 2 (whole coefficient is sticky) */
+ /* Note that leading zeros can safely be treated as useful digits */
+
+ /* [duplicate check-stickies code to save a test] */
+ /* [by-digit check for stickies as runs of zeros are rare] */
+ if (drop<DECPMAX) { /* NB lengths not addresses */
+ roundat=BUFOFF+DECPMAX-drop;
+ reround=*roundat;
+ for (ub=roundat+1; ub<BUFOFF+DECPMAX; ub++) {
+ if (*ub!=0) { /* non-zero to be discarded */
+ reround=DECSTICKYTAB[reround]; /* apply sticky bit */
+ break; /* [remainder don't-care] */
+ }
+ } /* check stickies */
+ ulsd=roundat-1; /* set LSD */
+ }
+ else { /* edge case */
+ if (drop==DECPMAX) {
+ roundat=BUFOFF;
+ reround=*roundat;
+ }
+ else {
+ roundat=BUFOFF-1;
+ reround=0;
+ }
+ for (ub=roundat+1; ub<BUFOFF+DECPMAX; ub++) {
+ if (*ub!=0) { /* non-zero to be discarded */
+ reround=DECSTICKYTAB[reround]; /* apply sticky bit */
+ break; /* [remainder don't-care] */
+ }
+ } /* check stickies */
+ *BUFOFF=0; /* make a coefficient of 0 */
+ ulsd=BUFOFF; /* .. at the MSD place */
+ }
+
+ if (reround!=0) { /* discarding non-zero */
+ uInt bump=0;
+ set->status|=DEC_Inexact;
+
+ /* next decide whether to increment the coefficient */
+ if (set->round==DEC_ROUND_HALF_EVEN) { /* fastpath slowest case */
+ if (reround>5) bump=1; /* >0.5 goes up */
+ else if (reround==5) /* exactly 0.5000 .. */
+ bump=*ulsd & 0x01; /* .. up iff [new] lsd is odd */
+ } /* r-h-e */
+ else switch (set->round) {
+ case DEC_ROUND_DOWN: {
+ /* no change */
+ break;} /* r-d */
+ case DEC_ROUND_HALF_DOWN: {
+ if (reround>5) bump=1;
+ break;} /* r-h-d */
+ case DEC_ROUND_HALF_UP: {
+ if (reround>=5) bump=1;
+ break;} /* r-h-u */
+ case DEC_ROUND_UP: {
+ if (reround>0) bump=1;
+ break;} /* r-u */
+ case DEC_ROUND_CEILING: {
+ /* same as _UP for positive numbers, and as _DOWN for negatives */
+ if (!(sourhil&DECFLOAT_Sign) && reround>0) bump=1;
+ break;} /* r-c */
+ case DEC_ROUND_FLOOR: {
+ /* same as _UP for negative numbers, and as _DOWN for positive */
+ /* [negative reround cannot occur on 0] */
+ if (sourhil&DECFLOAT_Sign && reround>0) bump=1;
+ break;} /* r-f */
+ case DEC_ROUND_05UP: {
+ if (reround>0) { /* anything out there is 'sticky' */
+ /* bump iff lsd=0 or 5; this cannot carry so it could be */
+ /* effected immediately with no bump -- but the code */
+ /* is clearer if this is done the same way as the others */
+ if (*ulsd==0 || *ulsd==5) bump=1;
+ }
+ break;} /* r-r */
+ default: { /* e.g., DEC_ROUND_MAX */
+ set->status|=DEC_Invalid_context;
+ #if DECCHECK
+ printf("Unknown rounding mode: %ld\n", (LI)set->round);
+ #endif
+ break;}
+ } /* switch (not r-h-e) */
+ /* printf("ReRound: %ld bump: %ld\n", (LI)reround, (LI)bump); */
+
+ if (bump!=0) { /* need increment */
+ /* increment the coefficient; this could give 1000... (after */
+ /* the all nines case) */
+ ub=ulsd;
+ for (; UINTAT(ub-3)==0x09090909; ub-=4) UINTAT(ub-3)=0;
+ /* now at most 3 digits left to non-9 (usually just the one) */
+ for (; *ub==9; ub--) *ub=0;
+ *ub+=1;
+ /* [the all-nines case will have carried one digit to the */
+ /* left of the original MSD -- just where it is needed] */
+ } /* bump needed */
+ } /* inexact rounding */
+
+ /* now clear zeros to the left so exactly DECPMAX digits will be */
+ /* available in the coefficent -- the first word to the left was */
+ /* cleared earlier for safe carry; now add any more needed */
+ if (drop>4) {
+ UINTAT(BUFOFF-8)=0; /* must be at least 5 */
+ for (ui=&UINTAT(BUFOFF-12); ui>&UINTAT(ulsd-DECPMAX-3); ui--) *ui=0;
+ }
+ } /* need round (drop>0) */
+
+ else { /* drop<0; padding with -drop digits is needed */
+ /* This is the case where an error can occur if the padded */
+ /* coefficient will not fit; checking for this can be done in the */
+ /* same loop as padding for zeros if the no-hope and zero cases */
+ /* are checked first */
+ if (-drop>DECPMAX-1) { /* cannot fit unless 0 */
+ if (!ISCOEFFZERO(BUFOFF)) return decInvalid(result, set);
+ /* a zero can have any exponent; just drop through and use it */
+ ulsd=BUFOFF+DECPMAX-1;
+ }
+ else { /* padding will fit (but may still be too long) */
+ /* final-word mask depends on endianess */
+ #if DECLITEND
+ static const uInt dmask[]={0, 0x000000ff, 0x0000ffff, 0x00ffffff};
+ #else
+ static const uInt dmask[]={0, 0xff000000, 0xffff0000, 0xffffff00};
+ #endif
+ for (ui=&UINTAT(BUFOFF+DECPMAX);; ui++) {
+ *ui=0;
+ if (UINTAT(&UBYTEAT(ui)-DECPMAX)!=0) { /* could be bad */
+ /* if all four digits should be zero, definitely bad */
+ if (ui<=&UINTAT(BUFOFF+DECPMAX+(-drop)-4))
+ return decInvalid(result, set);
+ /* must be a 1- to 3-digit sequence; check more carefully */
+ if ((UINTAT(&UBYTEAT(ui)-DECPMAX)&dmask[(-drop)%4])!=0)
+ return decInvalid(result, set);
+ break; /* no need for loop end test */
+ }
+ if (ui>=&UINTAT(BUFOFF+DECPMAX+(-drop)-4)) break; /* done */
+ }
+ ulsd=BUFOFF+DECPMAX+(-drop)-1;
+ } /* pad and check leading zeros */
+ } /* drop<0 */
+
+ #if DECTRACE
+ num.msd=ulsd-DECPMAX+1;
+ num.lsd=ulsd;
+ num.exponent=explb-DECBIAS;
+ num.sign=sourhil & DECFLOAT_Sign;
+ decShowNum(&num, "res");
+ #endif
+
+ /*------------------------------------------------------------------*/
+ /* At this point the result is DECPMAX digits, ending at ulsd, so */
+ /* fits the encoding exactly; there is no possibility of error */
+ /*------------------------------------------------------------------*/
+ encode=((exprb>>DECECONL)<<4) + *(ulsd-DECPMAX+1); /* make index */
+ encode=DECCOMBFROM[encode]; /* indexed by (0-2)*16+msd */
+ /* the exponent continuation can be extracted from the original RHS */
+ encode|=sourhir & ECONMASK;
+ encode|=sourhil&DECFLOAT_Sign; /* add the sign from LHS */
+
+ /* finally encode the coefficient */
+ /* private macro to encode a declet; this version can be used */
+ /* because all coefficient digits exist */
+ #define getDPD3q(dpd, n) ub=ulsd-(3*(n))-2; \
+ dpd=BCD2DPD[(*ub*256)+(*(ub+1)*16)+*(ub+2)];
+
+ #if DOUBLE
+ getDPD3q(dpd, 4); encode|=dpd<<8;
+ getDPD3q(dpd, 3); encode|=dpd>>2;
+ DFWORD(result, 0)=encode;
+ encode=dpd<<30;
+ getDPD3q(dpd, 2); encode|=dpd<<20;
+ getDPD3q(dpd, 1); encode|=dpd<<10;
+ getDPD3q(dpd, 0); encode|=dpd;
+ DFWORD(result, 1)=encode;
+
+ #elif QUAD
+ getDPD3q(dpd,10); encode|=dpd<<4;
+ getDPD3q(dpd, 9); encode|=dpd>>6;
+ DFWORD(result, 0)=encode;
+ encode=dpd<<26;
+ getDPD3q(dpd, 8); encode|=dpd<<16;
+ getDPD3q(dpd, 7); encode|=dpd<<6;
+ getDPD3q(dpd, 6); encode|=dpd>>4;
+ DFWORD(result, 1)=encode;
+ encode=dpd<<28;
+ getDPD3q(dpd, 5); encode|=dpd<<18;
+ getDPD3q(dpd, 4); encode|=dpd<<8;
+ getDPD3q(dpd, 3); encode|=dpd>>2;
+ DFWORD(result, 2)=encode;
+ encode=dpd<<30;
+ getDPD3q(dpd, 2); encode|=dpd<<20;
+ getDPD3q(dpd, 1); encode|=dpd<<10;
+ getDPD3q(dpd, 0); encode|=dpd;
+ DFWORD(result, 3)=encode;
+ #endif
+ return result;
+ } /* decFloatQuantize */
+
+/* ------------------------------------------------------------------ */
+/* decFloatReduce -- reduce finite coefficient to minimum length */
+/* */
+/* result gets the reduced decFloat */
+/* df is the source decFloat */
+/* set is the context */
+/* returns result, which will be canonical */
+/* */
+/* This removes all possible trailing zeros from the coefficient; */
+/* some may remain when the number is very close to Nmax. */
+/* Special values are unchanged and no status is set unless df=sNaN. */
+/* Reduced zero has an exponent q=0. */
+/* ------------------------------------------------------------------ */
+decFloat * decFloatReduce(decFloat *result, const decFloat *df,
+ decContext *set) {
+ bcdnum num; /* work */
+ uByte buf[DECPMAX], *ub; /* coefficient and pointer */
+ if (df!=result) *result=*df; /* copy, if needed */
+ if (DFISNAN(df)) return decNaNs(result, df, NULL, set); /* sNaN */
+ /* zeros and infinites propagate too */
+ if (DFISINF(df)) return decInfinity(result, df); /* canonical */
+ if (DFISZERO(df)) {
+ uInt sign=DFWORD(df, 0)&DECFLOAT_Sign;
+ decFloatZero(result);
+ DFWORD(result, 0)|=sign;
+ return result; /* exponent dropped, sign OK */
+ }
+ /* non-zero finite */
+ GETCOEFF(df, buf);
+ ub=buf+DECPMAX-1; /* -> lsd */
+ if (*ub) return result; /* no trailing zeros */
+ for (ub--; *ub==0;) ub--; /* terminates because non-zero */
+ /* *ub is the first non-zero from the right */
+ num.sign=DFWORD(df, 0)&DECFLOAT_Sign; /* set up number... */
+ num.exponent=GETEXPUN(df)+(Int)(buf+DECPMAX-1-ub); /* adjusted exponent */
+ num.msd=buf;
+ num.lsd=ub;
+ return decFinalize(result, &num, set);
+ } /* decFloatReduce */
+
+/* ------------------------------------------------------------------ */
+/* decFloatRemainder -- integer divide and return remainder */
+/* */
+/* result gets the remainder of dividing dfl by dfr: */
+/* dfl is the first decFloat (lhs) */
+/* dfr is the second decFloat (rhs) */
+/* set is the context */
+/* returns result */
+/* */
+/* ------------------------------------------------------------------ */
+decFloat * decFloatRemainder(decFloat *result,
+ const decFloat *dfl, const decFloat *dfr,
+ decContext *set) {
+ return decDivide(result, dfl, dfr, set, REMAINDER);
+ } /* decFloatRemainder */
+
+/* ------------------------------------------------------------------ */
+/* decFloatRemainderNear -- integer divide to nearest and remainder */
+/* */
+/* result gets the remainder of dividing dfl by dfr: */
+/* dfl is the first decFloat (lhs) */
+/* dfr is the second decFloat (rhs) */
+/* set is the context */
+/* returns result */
+/* */
+/* This is the IEEE remainder, where the nearest integer is used. */
+/* ------------------------------------------------------------------ */
+decFloat * decFloatRemainderNear(decFloat *result,
+ const decFloat *dfl, const decFloat *dfr,
+ decContext *set) {
+ return decDivide(result, dfl, dfr, set, REMNEAR);
+ } /* decFloatRemainderNear */
+
+/* ------------------------------------------------------------------ */
+/* decFloatRotate -- rotate the coefficient of a decFloat left/right */
+/* */
+/* result gets the result of rotating dfl */
+/* dfl is the source decFloat to rotate */
+/* dfr is the count of digits to rotate, an integer (with q=0) */
+/* set is the context */
+/* returns result */
+/* */
+/* The digits of the coefficient of dfl are rotated to the left (if */
+/* dfr is positive) or to the right (if dfr is negative) without */
+/* adjusting the exponent or the sign of dfl. */
+/* */
+/* dfr must be in the range -DECPMAX through +DECPMAX. */
+/* NaNs are propagated as usual. An infinite dfl is unaffected (but */
+/* dfr must be valid). No status is set unless dfr is invalid or an */
+/* operand is an sNaN. The result is canonical. */
+/* ------------------------------------------------------------------ */
+#define PHALF (ROUNDUP(DECPMAX/2, 4)) /* half length, rounded up */
+decFloat * decFloatRotate(decFloat *result,
+ const decFloat *dfl, const decFloat *dfr,
+ decContext *set) {
+ Int rotate; /* dfr as an Int */
+ uByte buf[DECPMAX+PHALF]; /* coefficient + half */
+ uInt digits, savestat; /* work */
+ bcdnum num; /* .. */
+ uByte *ub; /* .. */
+
+ if (DFISNAN(dfl)||DFISNAN(dfr)) return decNaNs(result, dfl, dfr, set);
+ if (!DFISINT(dfr)) return decInvalid(result, set);
+ digits=decFloatDigits(dfr); /* calculate digits */
+ if (digits>2) return decInvalid(result, set); /* definitely out of range */
+ rotate=DPD2BIN[DFWORD(dfr, DECWORDS-1)&0x3ff]; /* is in bottom declet */
+ if (rotate>DECPMAX) return decInvalid(result, set); /* too big */
+ /* [from here on no error or status change is possible] */
+ if (DFISINF(dfl)) return decInfinity(result, dfl); /* canonical */
+ /* handle no-rotate cases */
+ if (rotate==0 || rotate==DECPMAX) return decCanonical(result, dfl);
+ /* a real rotate is needed: 0 < rotate < DECPMAX */
+ /* reduce the rotation to no more than half to reduce copying later */
+ /* (for QUAD in fact half + 2 digits) */
+ if (DFISSIGNED(dfr)) rotate=-rotate;
+ if (abs(rotate)>PHALF) {
+ if (rotate<0) rotate=DECPMAX+rotate;
+ else rotate=rotate-DECPMAX;
+ }
+ /* now lay out the coefficient, leaving room to the right or the */
+ /* left depending on the direction of rotation */
+ ub=buf;
+ if (rotate<0) ub+=PHALF; /* rotate right, so space to left */
+ GETCOEFF(dfl, ub);
+ /* copy half the digits to left or right, and set num.msd */
+ if (rotate<0) {
+ memcpy(buf, buf+DECPMAX, PHALF);
+ num.msd=buf+PHALF+rotate;
+ }
+ else {
+ memcpy(buf+DECPMAX, buf, PHALF);
+ num.msd=buf+rotate;
+ }
+ /* fill in rest of num */
+ num.lsd=num.msd+DECPMAX-1;
+ num.sign=DFWORD(dfl, 0)&DECFLOAT_Sign;
+ num.exponent=GETEXPUN(dfl);
+ savestat=set->status; /* record */
+ decFinalize(result, &num, set);
+ set->status=savestat; /* restore */
+ return result;
+ } /* decFloatRotate */
+
+/* ------------------------------------------------------------------ */
+/* decFloatSameQuantum -- test decFloats for same quantum */
+/* */
+/* dfl is the first decFloat (lhs) */
+/* dfr is the second decFloat (rhs) */
+/* returns 1 if the operands have the same quantum, 0 otherwise */
+/* */
+/* No error is possible and no status results. */
+/* ------------------------------------------------------------------ */
+uInt decFloatSameQuantum(const decFloat *dfl, const decFloat *dfr) {
+ if (DFISSPECIAL(dfl) || DFISSPECIAL(dfr)) {
+ if (DFISNAN(dfl) && DFISNAN(dfr)) return 1;
+ if (DFISINF(dfl) && DFISINF(dfr)) return 1;
+ return 0; /* any other special mixture gives false */
+ }
+ if (GETEXP(dfl)==GETEXP(dfr)) return 1; /* biased exponents match */
+ return 0;
+ } /* decFloatSameQuantum */
+
+/* ------------------------------------------------------------------ */
+/* decFloatScaleB -- multiply by a power of 10, as per 754r */
+/* */
+/* result gets the result of the operation */
+/* dfl is the first decFloat (lhs) */
+/* dfr is the second decFloat (rhs), am integer (with q=0) */
+/* set is the context */
+/* returns result */
+/* */
+/* This computes result=dfl x 10**dfr where dfr is an integer in the */
+/* range +/-2*(emax+pmax), typically resulting from LogB. */
+/* Underflow and Overflow (with Inexact) may occur. NaNs propagate */
+/* as usual. */
+/* ------------------------------------------------------------------ */
+#define SCALEBMAX 2*(DECEMAX+DECPMAX) /* D=800, Q=12356 */
+decFloat * decFloatScaleB(decFloat *result,
+ const decFloat *dfl, const decFloat *dfr,
+ decContext *set) {
+ uInt digits; /* work */
+ Int expr; /* dfr as an Int */
+
+ if (DFISNAN(dfl)||DFISNAN(dfr)) return decNaNs(result, dfl, dfr, set);
+ if (!DFISINT(dfr)) return decInvalid(result, set);
+ digits=decFloatDigits(dfr); /* calculate digits */
+
+ #if DOUBLE
+ if (digits>3) return decInvalid(result, set); /* definitely out of range */
+ expr=DPD2BIN[DFWORD(dfr, 1)&0x3ff]; /* must be in bottom declet */
+ #elif QUAD
+ if (digits>5) return decInvalid(result, set); /* definitely out of range */
+ expr=DPD2BIN[DFWORD(dfr, 3)&0x3ff] /* in bottom 2 declets .. */
+ +DPD2BIN[(DFWORD(dfr, 3)>>10)&0x3ff]*1000; /* .. */
+ #endif
+ if (expr>SCALEBMAX) return decInvalid(result, set); /* oops */
+ /* [from now on no error possible] */
+ if (DFISINF(dfl)) return decInfinity(result, dfl); /* canonical */
+ if (DFISSIGNED(dfr)) expr=-expr;
+ /* dfl is finite and expr is valid */
+ *result=*dfl; /* copy to target */
+ return decFloatSetExponent(result, set, GETEXPUN(result)+expr);
+ } /* decFloatScaleB */
+
+/* ------------------------------------------------------------------ */
+/* decFloatShift -- shift the coefficient of a decFloat left or right */
+/* */
+/* result gets the result of shifting dfl */
+/* dfl is the source decFloat to shift */
+/* dfr is the count of digits to shift, an integer (with q=0) */
+/* set is the context */
+/* returns result */
+/* */
+/* The digits of the coefficient of dfl are shifted to the left (if */
+/* dfr is positive) or to the right (if dfr is negative) without */
+/* adjusting the exponent or the sign of dfl. */
+/* */
+/* dfr must be in the range -DECPMAX through +DECPMAX. */
+/* NaNs are propagated as usual. An infinite dfl is unaffected (but */
+/* dfr must be valid). No status is set unless dfr is invalid or an */
+/* operand is an sNaN. The result is canonical. */
+/* ------------------------------------------------------------------ */
+decFloat * decFloatShift(decFloat *result,
+ const decFloat *dfl, const decFloat *dfr,
+ decContext *set) {
+ Int shift; /* dfr as an Int */
+ uByte buf[DECPMAX*2]; /* coefficient + padding */
+ uInt digits, savestat; /* work */
+ bcdnum num; /* .. */
+
+ if (DFISNAN(dfl)||DFISNAN(dfr)) return decNaNs(result, dfl, dfr, set);
+ if (!DFISINT(dfr)) return decInvalid(result, set);
+ digits=decFloatDigits(dfr); /* calculate digits */
+ if (digits>2) return decInvalid(result, set); /* definitely out of range */
+ shift=DPD2BIN[DFWORD(dfr, DECWORDS-1)&0x3ff]; /* is in bottom declet */
+ if (shift>DECPMAX) return decInvalid(result, set); /* too big */
+ /* [from here on no error or status change is possible] */
+
+ if (DFISINF(dfl)) return decInfinity(result, dfl); /* canonical */
+ /* handle no-shift and all-shift (clear to zero) cases */
+ if (shift==0) return decCanonical(result, dfl);
+ if (shift==DECPMAX) { /* zero with sign */
+ uByte sign=(uByte)(DFBYTE(dfl, 0)&0x80); /* save sign bit */
+ decFloatZero(result); /* make +0 */
+ DFBYTE(result, 0)=(uByte)(DFBYTE(result, 0)|sign); /* and set sign */
+ /* [cannot safely use CopySign] */
+ return result;
+ }
+ /* a real shift is needed: 0 < shift < DECPMAX */
+ num.sign=DFWORD(dfl, 0)&DECFLOAT_Sign;
+ num.exponent=GETEXPUN(dfl);
+ num.msd=buf;
+ GETCOEFF(dfl, buf);
+ if (DFISSIGNED(dfr)) { /* shift right */
+ /* edge cases are taken care of, so this is easy */
+ num.lsd=buf+DECPMAX-shift-1;
+ }
+ else { /* shift left -- zero padding needed to right */
+ UINTAT(buf+DECPMAX)=0; /* 8 will handle most cases */
+ UINTAT(buf+DECPMAX+4)=0; /* .. */
+ if (shift>8) memset(buf+DECPMAX+8, 0, 8+QUAD*18); /* all other cases */
+ num.msd+=shift;
+ num.lsd=num.msd+DECPMAX-1;
+ }
+ savestat=set->status; /* record */
+ decFinalize(result, &num, set);
+ set->status=savestat; /* restore */
+ return result;
+ } /* decFloatShift */
+
+/* ------------------------------------------------------------------ */
+/* decFloatSubtract -- subtract a decFloat from another */
+/* */
+/* result gets the result of subtracting dfr from dfl: */
+/* dfl is the first decFloat (lhs) */
+/* dfr is the second decFloat (rhs) */
+/* set is the context */
+/* returns result */
+/* */
+/* ------------------------------------------------------------------ */
+decFloat * decFloatSubtract(decFloat *result,
+ const decFloat *dfl, const decFloat *dfr,
+ decContext *set) {
+ decFloat temp;
+ /* NaNs must propagate without sign change */
+ if (DFISNAN(dfr)) return decFloatAdd(result, dfl, dfr, set);
+ temp=*dfr; /* make a copy */
+ DFBYTE(&temp, 0)^=0x80; /* flip sign */
+ return decFloatAdd(result, dfl, &temp, set); /* and add to the lhs */
+ } /* decFloatSubtract */
+
+/* ------------------------------------------------------------------ */
+/* decFloatToInt -- round to 32-bit binary integer (4 flavours) */
+/* */
+/* df is the decFloat to round */
+/* set is the context */
+/* round is the rounding mode to use */
+/* returns a uInt or an Int, rounded according to the name */
+/* */
+/* Invalid will always be signaled if df is a NaN, is Infinite, or is */
+/* outside the range of the target; Inexact will not be signaled for */
+/* simple rounding unless 'Exact' appears in the name. */
+/* ------------------------------------------------------------------ */
+uInt decFloatToUInt32(const decFloat *df, decContext *set,
+ enum rounding round) {
+ return decToInt32(df, set, round, 0, 1);}
+
+uInt decFloatToUInt32Exact(const decFloat *df, decContext *set,
+ enum rounding round) {
+ return decToInt32(df, set, round, 1, 1);}
+
+Int decFloatToInt32(const decFloat *df, decContext *set,
+ enum rounding round) {
+ return (Int)decToInt32(df, set, round, 0, 0);}
+
+Int decFloatToInt32Exact(const decFloat *df, decContext *set,
+ enum rounding round) {
+ return (Int)decToInt32(df, set, round, 1, 0);}
+
+/* ------------------------------------------------------------------ */
+/* decFloatToIntegral -- round to integral value (two flavours) */
+/* */
+/* result gets the result */
+/* df is the decFloat to round */
+/* set is the context */
+/* round is the rounding mode to use */
+/* returns result */
+/* */
+/* No exceptions, even Inexact, are raised except for sNaN input, or */
+/* if 'Exact' appears in the name. */
+/* ------------------------------------------------------------------ */
+decFloat * decFloatToIntegralValue(decFloat *result, const decFloat *df,
+ decContext *set, enum rounding round) {
+ return decToIntegral(result, df, set, round, 0);}
+
+decFloat * decFloatToIntegralExact(decFloat *result, const decFloat *df,
+ decContext *set) {
+ return decToIntegral(result, df, set, set->round, 1);}
+
+/* ------------------------------------------------------------------ */
+/* decFloatXor -- logical digitwise XOR of two decFloats */
+/* */
+/* result gets the result of XORing dfl and dfr */
+/* dfl is the first decFloat (lhs) */
+/* dfr is the second decFloat (rhs) */
+/* set is the context */
+/* returns result, which will be canonical with sign=0 */
+/* */
+/* The operands must be positive, finite with exponent q=0, and */
+/* comprise just zeros and ones; if not, Invalid operation results. */
+/* ------------------------------------------------------------------ */
+decFloat * decFloatXor(decFloat *result,
+ const decFloat *dfl, const decFloat *dfr,
+ decContext *set) {
+ if (!DFISUINT01(dfl) || !DFISUINT01(dfr)
+ || !DFISCC01(dfl) || !DFISCC01(dfr)) return decInvalid(result, set);
+ /* the operands are positive finite integers (q=0) with just 0s and 1s */
+ #if DOUBLE
+ DFWORD(result, 0)=ZEROWORD
+ |((DFWORD(dfl, 0) ^ DFWORD(dfr, 0))&0x04009124);
+ DFWORD(result, 1)=(DFWORD(dfl, 1) ^ DFWORD(dfr, 1))&0x49124491;
+ #elif QUAD
+ DFWORD(result, 0)=ZEROWORD
+ |((DFWORD(dfl, 0) ^ DFWORD(dfr, 0))&0x04000912);
+ DFWORD(result, 1)=(DFWORD(dfl, 1) ^ DFWORD(dfr, 1))&0x44912449;
+ DFWORD(result, 2)=(DFWORD(dfl, 2) ^ DFWORD(dfr, 2))&0x12449124;
+ DFWORD(result, 3)=(DFWORD(dfl, 3) ^ DFWORD(dfr, 3))&0x49124491;
+ #endif
+ return result;
+ } /* decFloatXor */
+
+/* ------------------------------------------------------------------ */
+/* decInvalid -- set Invalid_operation result */
+/* */
+/* result gets a canonical NaN */
+/* set is the context */
+/* returns result */
+/* */
+/* status has Invalid_operation added */
+/* ------------------------------------------------------------------ */
+static decFloat *decInvalid(decFloat *result, decContext *set) {
+ decFloatZero(result);
+ DFWORD(result, 0)=DECFLOAT_qNaN;
+ set->status|=DEC_Invalid_operation;
+ return result;
+ } /* decInvalid */
+
+/* ------------------------------------------------------------------ */
+/* decInfinity -- set canonical Infinity with sign from a decFloat */
+/* */
+/* result gets a canonical Infinity */
+/* df is source decFloat (only the sign is used) */
+/* returns result */
+/* */
+/* df may be the same as result */
+/* ------------------------------------------------------------------ */
+static decFloat *decInfinity(decFloat *result, const decFloat *df) {
+ uInt sign=DFWORD(df, 0); /* save source signword */
+ decFloatZero(result); /* clear everything */
+ DFWORD(result, 0)=DECFLOAT_Inf | (sign & DECFLOAT_Sign);
+ return result;
+ } /* decInfinity */
+
+/* ------------------------------------------------------------------ */
+/* decNaNs -- handle NaN argument(s) */
+/* */
+/* result gets the result of handling dfl and dfr, one or both of */
+/* which is a NaN */
+/* dfl is the first decFloat (lhs) */
+/* dfr is the second decFloat (rhs) -- may be NULL for a single- */
+/* operand operation */
+/* set is the context */
+/* returns result */
+/* */
+/* Called when one or both operands is a NaN, and propagates the */
+/* appropriate result to res. When an sNaN is found, it is changed */
+/* to a qNaN and Invalid operation is set. */
+/* ------------------------------------------------------------------ */
+static decFloat *decNaNs(decFloat *result,
+ const decFloat *dfl, const decFloat *dfr,
+ decContext *set) {
+ /* handle sNaNs first */
+ if (dfr!=NULL && DFISSNAN(dfr) && !DFISSNAN(dfl)) dfl=dfr; /* use RHS */
+ if (DFISSNAN(dfl)) {
+ decCanonical(result, dfl); /* propagate canonical sNaN */
+ DFWORD(result, 0)&=~(DECFLOAT_qNaN ^ DECFLOAT_sNaN); /* quiet */
+ set->status|=DEC_Invalid_operation;
+ return result;
+ }
+ /* one or both is a quiet NaN */
+ if (!DFISNAN(dfl)) dfl=dfr; /* RHS must be NaN, use it */
+ return decCanonical(result, dfl); /* propagate canonical qNaN */
+ } /* decNaNs */
+
+/* ------------------------------------------------------------------ */
+/* decNumCompare -- numeric comparison of two decFloats */
+/* */
+/* dfl is the left-hand decFloat, which is not a NaN */
+/* dfr is the right-hand decFloat, which is not a NaN */
+/* tot is 1 for total order compare, 0 for simple numeric */
+/* returns -1, 0, or +1 for dfl<dfr, dfl=dfr, dfl>dfr */
+/* */
+/* No error is possible; status and mode are unchanged. */
+/* ------------------------------------------------------------------ */
+static Int decNumCompare(const decFloat *dfl, const decFloat *dfr, Flag tot) {
+ Int sigl, sigr; /* LHS and RHS non-0 signums */
+ Int shift; /* shift needed to align operands */
+ uByte *ub, *uc; /* work */
+ /* buffers +2 if Quad (36 digits), need double plus 4 for safe padding */
+ uByte bufl[DECPMAX*2+QUAD*2+4]; /* for LHS coefficient + padding */
+ uByte bufr[DECPMAX*2+QUAD*2+4]; /* for RHS coefficient + padding */
+
+ sigl=1;
+ if (DFISSIGNED(dfl)) {
+ if (!DFISSIGNED(dfr)) { /* -LHS +RHS */
+ if (DFISZERO(dfl) && DFISZERO(dfr) && !tot) return 0;
+ return -1; /* RHS wins */
+ }
+ sigl=-1;
+ }
+ if (DFISSIGNED(dfr)) {
+ if (!DFISSIGNED(dfl)) { /* +LHS -RHS */
+ if (DFISZERO(dfl) && DFISZERO(dfr) && !tot) return 0;
+ return +1; /* LHS wins */
+ }
+ }
+
+ /* signs are the same; operand(s) could be zero */
+ sigr=-sigl; /* sign to return if abs(RHS) wins */
+
+ if (DFISINF(dfl)) {
+ if (DFISINF(dfr)) return 0; /* both infinite & same sign */
+ return sigl; /* inf > n */
+ }
+ if (DFISINF(dfr)) return sigr; /* n < inf [dfl is finite] */
+
+ /* here, both are same sign and finite; calculate their offset */
+ shift=GETEXP(dfl)-GETEXP(dfr); /* [0 means aligned] */
+ /* [bias can be ignored -- the absolute exponent is not relevant] */
+
+ if (DFISZERO(dfl)) {
+ if (!DFISZERO(dfr)) return sigr; /* LHS=0, RHS!=0 */
+ /* both are zero, return 0 if both same exponent or numeric compare */
+ if (shift==0 || !tot) return 0;
+ if (shift>0) return sigl;
+ return sigr; /* [shift<0] */
+ }
+ else { /* LHS!=0 */
+ if (DFISZERO(dfr)) return sigl; /* LHS!=0, RHS=0 */
+ }
+ /* both are known to be non-zero at this point */
+
+ /* if the exponents are so different that the coefficients do not */
+ /* overlap (by even one digit) then a full comparison is not needed */
+ if (abs(shift)>=DECPMAX) { /* no overlap */
+ /* coefficients are known to be non-zero */
+ if (shift>0) return sigl;
+ return sigr; /* [shift<0] */
+ }
+
+ /* decode the coefficients */
+ /* (shift both right two if Quad to make a multiple of four) */
+ #if QUAD
+ UINTAT(bufl)=0;
+ UINTAT(bufr)=0;
+ #endif
+ GETCOEFF(dfl, bufl+QUAD*2); /* decode from decFloat */
+ GETCOEFF(dfr, bufr+QUAD*2); /* .. */
+ if (shift==0) { /* aligned; common and easy */
+ /* all multiples of four, here */
+ for (ub=bufl, uc=bufr; ub<bufl+DECPMAX+QUAD*2; ub+=4, uc+=4) {
+ if (UINTAT(ub)==UINTAT(uc)) continue; /* so far so same */
+ /* about to find a winner; go by bytes in case little-endian */
+ for (;; ub++, uc++) {
+ if (*ub>*uc) return sigl; /* difference found */
+ if (*ub<*uc) return sigr; /* .. */
+ }
+ }
+ } /* aligned */
+ else if (shift>0) { /* lhs to left */
+ ub=bufl; /* RHS pointer */
+ /* pad bufl so right-aligned; most shifts will fit in 8 */
+ UINTAT(bufl+DECPMAX+QUAD*2)=0; /* add eight zeros */
+ UINTAT(bufl+DECPMAX+QUAD*2+4)=0; /* .. */
+ if (shift>8) {
+ /* more than eight; fill the rest, and also worth doing the */
+ /* lead-in by fours */
+ uByte *up; /* work */
+ uByte *upend=bufl+DECPMAX+QUAD*2+shift;
+ for (up=bufl+DECPMAX+QUAD*2+8; up<upend; up+=4) UINTAT(up)=0;
+ /* [pads up to 36 in all for Quad] */
+ for (;; ub+=4) {
+ if (UINTAT(ub)!=0) return sigl;
+ if (ub+4>bufl+shift-4) break;
+ }
+ }
+ /* check remaining leading digits */
+ for (; ub<bufl+shift; ub++) if (*ub!=0) return sigl;
+ /* now start the overlapped part; bufl has been padded, so the */
+ /* comparison can go for the full length of bufr, which is a */
+ /* multiple of 4 bytes */
+ for (uc=bufr; ; uc+=4, ub+=4) {
+ if (UINTAT(uc)!=UINTAT(ub)) { /* mismatch found */
+ for (;; uc++, ub++) { /* check from left [little-endian?] */
+ if (*ub>*uc) return sigl; /* difference found */
+ if (*ub<*uc) return sigr; /* .. */
+ }
+ } /* mismatch */
+ if (uc==bufr+QUAD*2+DECPMAX-4) break; /* all checked */
+ }
+ } /* shift>0 */
+
+ else { /* shift<0) .. RHS is to left of LHS; mirror shift>0 */
+ uc=bufr; /* RHS pointer */
+ /* pad bufr so right-aligned; most shifts will fit in 8 */
+ UINTAT(bufr+DECPMAX+QUAD*2)=0; /* add eight zeros */
+ UINTAT(bufr+DECPMAX+QUAD*2+4)=0; /* .. */
+ if (shift<-8) {
+ /* more than eight; fill the rest, and also worth doing the */
+ /* lead-in by fours */
+ uByte *up; /* work */
+ uByte *upend=bufr+DECPMAX+QUAD*2-shift;
+ for (up=bufr+DECPMAX+QUAD*2+8; up<upend; up+=4) UINTAT(up)=0;
+ /* [pads up to 36 in all for Quad] */
+ for (;; uc+=4) {
+ if (UINTAT(uc)!=0) return sigr;
+ if (uc+4>bufr-shift-4) break;
+ }
+ }
+ /* check remaining leading digits */
+ for (; uc<bufr-shift; uc++) if (*uc!=0) return sigr;
+ /* now start the overlapped part; bufr has been padded, so the */
+ /* comparison can go for the full length of bufl, which is a */
+ /* multiple of 4 bytes */
+ for (ub=bufl; ; ub+=4, uc+=4) {
+ if (UINTAT(ub)!=UINTAT(uc)) { /* mismatch found */
+ for (;; ub++, uc++) { /* check from left [little-endian?] */
+ if (*ub>*uc) return sigl; /* difference found */
+ if (*ub<*uc) return sigr; /* .. */
+ }
+ } /* mismatch */
+ if (ub==bufl+QUAD*2+DECPMAX-4) break; /* all checked */
+ }
+ } /* shift<0 */
+
+ /* Here when compare equal */
+ if (!tot) return 0; /* numerically equal */
+ /* total ordering .. exponent matters */
+ if (shift>0) return sigl; /* total order by exponent */
+ if (shift<0) return sigr; /* .. */
+ return 0;
+ } /* decNumCompare */
+
+/* ------------------------------------------------------------------ */
+/* decToInt32 -- local routine to effect ToInteger conversions */
+/* */
+/* df is the decFloat to convert */
+/* set is the context */
+/* rmode is the rounding mode to use */
+/* exact is 1 if Inexact should be signalled */
+/* unsign is 1 if the result a uInt, 0 if an Int (cast to uInt) */
+/* returns 32-bit result as a uInt */
+/* */
+/* Invalid is set is df is a NaN, is infinite, or is out-of-range; in */
+/* these cases 0 is returned. */
+/* ------------------------------------------------------------------ */
+static uInt decToInt32(const decFloat *df, decContext *set,
+ enum rounding rmode, Flag exact, Flag unsign) {
+ Int exp; /* exponent */
+ uInt sourhi, sourpen, sourlo; /* top word from source decFloat .. */
+ uInt hi, lo; /* .. penultimate, least, etc. */
+ decFloat zero, result; /* work */
+ Int i; /* .. */
+
+ /* Start decoding the argument */
+ sourhi=DFWORD(df, 0); /* top word */
+ exp=DECCOMBEXP[sourhi>>26]; /* get exponent high bits (in place) */
+ if (EXPISSPECIAL(exp)) { /* is special? */
+ set->status|=DEC_Invalid_operation; /* signal */
+ return 0;
+ }
+
+ /* Here when the argument is finite */
+ if (GETEXPUN(df)==0) result=*df; /* already a true integer */
+ else { /* need to round to integer */
+ enum rounding saveround; /* saver */
+ uInt savestatus; /* .. */
+ saveround=set->round; /* save rounding mode .. */
+ savestatus=set->status; /* .. and status */
+ set->round=rmode; /* set mode */
+ decFloatZero(&zero); /* make 0E+0 */
+ set->status=0; /* clear */
+ decFloatQuantize(&result, df, &zero, set); /* [this may fail] */
+ set->round=saveround; /* restore rounding mode .. */
+ if (exact) set->status|=savestatus; /* include Inexact */
+ else set->status=savestatus; /* .. or just original status */
+ }
+
+ /* only the last four declets of the coefficient can contain */
+ /* non-zero; check for others (and also NaN or Infinity from the */
+ /* Quantize) first (see DFISZERO for explanation): */
+ /* decFloatShow(&result, "sofar"); */
+ #if DOUBLE
+ if ((DFWORD(&result, 0)&0x1c03ff00)!=0
+ || (DFWORD(&result, 0)&0x60000000)==0x60000000) {
+ #elif QUAD
+ if ((DFWORD(&result, 2)&0xffffff00)!=0
+ || DFWORD(&result, 1)!=0
+ || (DFWORD(&result, 0)&0x1c003fff)!=0
+ || (DFWORD(&result, 0)&0x60000000)==0x60000000) {
+ #endif
+ set->status|=DEC_Invalid_operation; /* Invalid or out of range */
+ return 0;
+ }
+ /* get last twelve digits of the coefficent into hi & ho, base */
+ /* 10**9 (see GETCOEFFBILL): */
+ sourlo=DFWORD(&result, DECWORDS-1);
+ lo=DPD2BIN0[sourlo&0x3ff]
+ +DPD2BINK[(sourlo>>10)&0x3ff]
+ +DPD2BINM[(sourlo>>20)&0x3ff];
+ sourpen=DFWORD(&result, DECWORDS-2);
+ hi=DPD2BIN0[((sourpen<<2) | (sourlo>>30))&0x3ff];
+
+ /* according to request, check range carefully */
+ if (unsign) {
+ if (hi>4 || (hi==4 && lo>294967295) || (hi+lo!=0 && DFISSIGNED(&result))) {
+ set->status|=DEC_Invalid_operation; /* out of range */
+ return 0;
+ }
+ return hi*BILLION+lo;
+ }
+ /* signed */
+ if (hi>2 || (hi==2 && lo>147483647)) {
+ /* handle the usual edge case */
+ if (lo==147483648 && hi==2 && DFISSIGNED(&result)) return 0x80000000;
+ set->status|=DEC_Invalid_operation; /* truly out of range */
+ return 0;
+ }
+ i=hi*BILLION+lo;
+ if (DFISSIGNED(&result)) i=-i;
+ return (uInt)i;
+ } /* decToInt32 */
+
+/* ------------------------------------------------------------------ */
+/* decToIntegral -- local routine to effect ToIntegral value */
+/* */
+/* result gets the result */
+/* df is the decFloat to round */
+/* set is the context */
+/* rmode is the rounding mode to use */
+/* exact is 1 if Inexact should be signalled */
+/* returns result */
+/* ------------------------------------------------------------------ */
+static decFloat * decToIntegral(decFloat *result, const decFloat *df,
+ decContext *set, enum rounding rmode,
+ Flag exact) {
+ Int exp; /* exponent */
+ uInt sourhi; /* top word from source decFloat */
+ enum rounding saveround; /* saver */
+ uInt savestatus; /* .. */
+ decFloat zero; /* work */
+
+ /* Start decoding the argument */
+ sourhi=DFWORD(df, 0); /* top word */
+ exp=DECCOMBEXP[sourhi>>26]; /* get exponent high bits (in place) */
+
+ if (EXPISSPECIAL(exp)) { /* is special? */
+ /* NaNs are handled as usual */
+ if (DFISNAN(df)) return decNaNs(result, df, NULL, set);
+ /* must be infinite; return canonical infinity with sign of df */
+ return decInfinity(result, df);
+ }
+
+ /* Here when the argument is finite */
+ /* complete extraction of the exponent */
+ exp+=GETECON(df)-DECBIAS; /* .. + continuation and unbias */
+
+ if (exp>=0) return decCanonical(result, df); /* already integral */
+
+ saveround=set->round; /* save rounding mode .. */
+ savestatus=set->status; /* .. and status */
+ set->round=rmode; /* set mode */
+ decFloatZero(&zero); /* make 0E+0 */
+ decFloatQuantize(result, df, &zero, set); /* 'integrate'; cannot fail */
+ set->round=saveround; /* restore rounding mode .. */
+ if (!exact) set->status=savestatus; /* .. and status, unless exact */
+ return result;
+ } /* decToIntegral */
diff --git a/libdecnumber/decCommon.c b/libdecnumber/decCommon.c
new file mode 100644
index 0000000..84e1b2a
--- /dev/null
+++ b/libdecnumber/decCommon.c
@@ -0,0 +1,1771 @@
+/* Common code for fixed-size types in the decNumber C Library.
+ Copyright (C) 2007 Free Software Foundation, Inc.
+ Contributed by IBM Corporation. Author Mike Cowlishaw.
+
+ This file is part of GCC.
+
+ GCC is free software; you can redistribute it and/or modify it under
+ the terms of the GNU General Public License as published by the Free
+ Software Foundation; either version 2, or (at your option) any later
+ version.
+
+ In addition to the permissions in the GNU General Public License,
+ the Free Software Foundation gives you unlimited permission to link
+ the compiled version of this file into combinations with other
+ programs, and to distribute those combinations without any
+ restriction coming from the use of this file. (The General Public
+ License restrictions do apply in other respects; for example, they
+ cover modification of the file, and distribution when not linked
+ into a combine executable.)
+
+ GCC is distributed in the hope that it will be useful, but WITHOUT ANY
+ WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
+ for more details.
+
+ You should have received a copy of the GNU General Public License
+ along with GCC; see the file COPYING. If not, write to the Free
+ Software Foundation, 51 Franklin Street, Fifth Floor, Boston, MA
+ 02110-1301, USA. */
+
+/* ------------------------------------------------------------------ */
+/* decCommon.c -- common code for all three fixed-size types */
+/* ------------------------------------------------------------------ */
+/* This module comprises code that is shared between all the formats */
+/* (decSingle, decDouble, and decQuad); it includes set and extract */
+/* of format components, widening, narrowing, and string conversions. */
+/* */
+/* Unlike decNumber, parameterization takes place at compile time */
+/* rather than at runtime. The parameters are set in the decDouble.c */
+/* (etc.) files, which then include this one to produce the compiled */
+/* code. The functions here, therefore, are code shared between */
+/* multiple formats. */
+/* ------------------------------------------------------------------ */
+/* Names here refer to decFloat rather than to decDouble, etc., and */
+/* the functions are in strict alphabetical order. */
+/* Constants, tables, and debug function(s) are included only for QUAD */
+/* (which will always be compiled if DOUBLE or SINGLE are used). */
+/* */
+/* Whenever a decContext is used, only the status may be set (using */
+/* OR) or the rounding mode read; all other fields are ignored and */
+/* untouched. */
+
+/* names for simpler testing and default context */
+#if DECPMAX==7
+ #define SINGLE 1
+ #define DOUBLE 0
+ #define QUAD 0
+ #define DEFCONTEXT DEC_INIT_DECIMAL32
+#elif DECPMAX==16
+ #define SINGLE 0
+ #define DOUBLE 1
+ #define QUAD 0
+ #define DEFCONTEXT DEC_INIT_DECIMAL64
+#elif DECPMAX==34
+ #define SINGLE 0
+ #define DOUBLE 0
+ #define QUAD 1
+ #define DEFCONTEXT DEC_INIT_DECIMAL128
+#else
+ #error Unexpected DECPMAX value
+#endif
+
+/* Assertions */
+
+#if DECPMAX!=7 && DECPMAX!=16 && DECPMAX!=34
+ #error Unexpected Pmax (DECPMAX) value for this module
+#endif
+
+/* Assert facts about digit characters, etc. */
+#if ('9'&0x0f)!=9
+ #error This module assumes characters are of the form 0b....nnnn
+ /* where .... are don't care 4 bits and nnnn is 0000 through 1001 */
+#endif
+#if ('9'&0xf0)==('.'&0xf0)
+ #error This module assumes '.' has a different mask than a digit
+#endif
+
+/* Assert ToString lay-out conditions */
+#if DECSTRING<DECPMAX+9
+ #error ToString needs at least 8 characters for lead-in and dot
+#endif
+#if DECPMAX+DECEMAXD+5 > DECSTRING
+ #error Exponent form can be too long for ToString to lay out safely
+#endif
+#if DECEMAXD > 4
+ #error Exponent form is too long for ToString to lay out
+ /* Note: code for up to 9 digits exists in archives [decOct] */
+#endif
+
+/* Private functions used here and possibly in decBasic.c, etc. */
+static decFloat * decFinalize(decFloat *, bcdnum *, decContext *);
+static Flag decBiStr(const char *, const char *, const char *);
+
+/* Macros and private tables; those which are not format-dependent */
+/* are only included if decQuad is being built. */
+
+/* ------------------------------------------------------------------ */
+/* Combination field lookup tables (uInts to save measurable work) */
+/* */
+/* DECCOMBEXP - 2 most-significant-bits of exponent (00, 01, or */
+/* 10), shifted left for format, or DECFLOAT_Inf/NaN */
+/* DECCOMBWEXP - The same, for the next-wider format (unless QUAD) */
+/* DECCOMBMSD - 4-bit most-significant-digit */
+/* [0 if the index is a special (Infinity or NaN)] */
+/* DECCOMBFROM - 5-bit combination field from EXP top bits and MSD */
+/* (placed in uInt so no shift is needed) */
+/* */
+/* DECCOMBEXP, DECCOMBWEXP, and DECCOMBMSD are indexed by the sign */
+/* and 5-bit combination field (0-63, the second half of the table */
+/* identical to the first half) */
+/* DECCOMBFROM is indexed by expTopTwoBits*16 + msd */
+/* */
+/* DECCOMBMSD and DECCOMBFROM are not format-dependent and so are */
+/* only included once, when QUAD is being built */
+/* ------------------------------------------------------------------ */
+static const uInt DECCOMBEXP[64]={
+ 0, 0, 0, 0, 0, 0, 0, 0,
+ 1<<DECECONL, 1<<DECECONL, 1<<DECECONL, 1<<DECECONL,
+ 1<<DECECONL, 1<<DECECONL, 1<<DECECONL, 1<<DECECONL,
+ 2<<DECECONL, 2<<DECECONL, 2<<DECECONL, 2<<DECECONL,
+ 2<<DECECONL, 2<<DECECONL, 2<<DECECONL, 2<<DECECONL,
+ 0, 0, 1<<DECECONL, 1<<DECECONL,
+ 2<<DECECONL, 2<<DECECONL, DECFLOAT_Inf, DECFLOAT_NaN,
+ 0, 0, 0, 0, 0, 0, 0, 0,
+ 1<<DECECONL, 1<<DECECONL, 1<<DECECONL, 1<<DECECONL,
+ 1<<DECECONL, 1<<DECECONL, 1<<DECECONL, 1<<DECECONL,
+ 2<<DECECONL, 2<<DECECONL, 2<<DECECONL, 2<<DECECONL,
+ 2<<DECECONL, 2<<DECECONL, 2<<DECECONL, 2<<DECECONL,
+ 0, 0, 1<<DECECONL, 1<<DECECONL,
+ 2<<DECECONL, 2<<DECECONL, DECFLOAT_Inf, DECFLOAT_NaN};
+#if !QUAD
+static const uInt DECCOMBWEXP[64]={
+ 0, 0, 0, 0, 0, 0, 0, 0,
+ 1<<DECWECONL, 1<<DECWECONL, 1<<DECWECONL, 1<<DECWECONL,
+ 1<<DECWECONL, 1<<DECWECONL, 1<<DECWECONL, 1<<DECWECONL,
+ 2<<DECWECONL, 2<<DECWECONL, 2<<DECWECONL, 2<<DECWECONL,
+ 2<<DECWECONL, 2<<DECWECONL, 2<<DECWECONL, 2<<DECWECONL,
+ 0, 0, 1<<DECWECONL, 1<<DECWECONL,
+ 2<<DECWECONL, 2<<DECWECONL, DECFLOAT_Inf, DECFLOAT_NaN,
+ 0, 0, 0, 0, 0, 0, 0, 0,
+ 1<<DECWECONL, 1<<DECWECONL, 1<<DECWECONL, 1<<DECWECONL,
+ 1<<DECWECONL, 1<<DECWECONL, 1<<DECWECONL, 1<<DECWECONL,
+ 2<<DECWECONL, 2<<DECWECONL, 2<<DECWECONL, 2<<DECWECONL,
+ 2<<DECWECONL, 2<<DECWECONL, 2<<DECWECONL, 2<<DECWECONL,
+ 0, 0, 1<<DECWECONL, 1<<DECWECONL,
+ 2<<DECWECONL, 2<<DECWECONL, DECFLOAT_Inf, DECFLOAT_NaN};
+#endif
+
+#if QUAD
+const uInt DECCOMBMSD[64]={
+ 0, 1, 2, 3, 4, 5, 6, 7, 0, 1, 2, 3, 4, 5, 6, 7,
+ 0, 1, 2, 3, 4, 5, 6, 7, 8, 9, 8, 9, 8, 9, 0, 1,
+ 0, 1, 2, 3, 4, 5, 6, 7, 0, 1, 2, 3, 4, 5, 6, 7,
+ 0, 1, 2, 3, 4, 5, 6, 7, 8, 9, 8, 9, 8, 9, 0, 0};
+
+const uInt DECCOMBFROM[48]={
+ 0x00000000, 0x04000000, 0x08000000, 0x0C000000, 0x10000000, 0x14000000,
+ 0x18000000, 0x1C000000, 0x60000000, 0x64000000, 0x00000000, 0x00000000,
+ 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x20000000, 0x24000000,
+ 0x28000000, 0x2C000000, 0x30000000, 0x34000000, 0x38000000, 0x3C000000,
+ 0x68000000, 0x6C000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000,
+ 0x00000000, 0x00000000, 0x40000000, 0x44000000, 0x48000000, 0x4C000000,
+ 0x50000000, 0x54000000, 0x58000000, 0x5C000000, 0x70000000, 0x74000000,
+ 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000};
+
+/* ------------------------------------------------------------------ */
+/* Request and include the tables to use for conversions */
+/* ------------------------------------------------------------------ */
+#define DEC_BCD2DPD 1 /* 0-0x999 -> DPD */
+#define DEC_BIN2DPD 1 /* 0-999 -> DPD */
+#define DEC_BIN2BCD8 1 /* 0-999 -> ddd, len */
+#define DEC_DPD2BCD8 1 /* DPD -> ddd, len */
+#define DEC_DPD2BIN 1 /* DPD -> 0-999 */
+#define DEC_DPD2BINK 1 /* DPD -> 0-999000 */
+#define DEC_DPD2BINM 1 /* DPD -> 0-999000000 */
+#include "decDPD.h" /* source of the lookup tables */
+
+#endif
+
+/* ----------------------------------------------------------------- */
+/* decBiStr -- compare string with pairwise options */
+/* */
+/* targ is the string to compare */
+/* str1 is one of the strings to compare against (length may be 0) */
+/* str2 is the other; it must be the same length as str1 */
+/* */
+/* returns 1 if strings compare equal, (that is, targ is the same */
+/* length as str1 and str2, and each character of targ is in one */
+/* of str1 or str2 in the corresponding position), or 0 otherwise */
+/* */
+/* This is used for generic caseless compare, including the awkward */
+/* case of the Turkish dotted and dotless Is. Use as (for example): */
+/* if (decBiStr(test, "mike", "MIKE")) ... */
+/* ----------------------------------------------------------------- */
+static Flag decBiStr(const char *targ, const char *str1, const char *str2) {
+ for (;;targ++, str1++, str2++) {
+ if (*targ!=*str1 && *targ!=*str2) return 0;
+ /* *targ has a match in one (or both, if terminator) */
+ if (*targ=='\0') break;
+ } /* forever */
+ return 1;
+ } /* decBiStr */
+
+/* ------------------------------------------------------------------ */
+/* decFinalize -- adjust and store a final result */
+/* */
+/* df is the decFloat format number which gets the final result */
+/* num is the descriptor of the number to be checked and encoded */
+/* [its values, including the coefficient, may be modified] */
+/* set is the context to use */
+/* returns df */
+/* */
+/* The num descriptor may point to a bcd8 string of any length; this */
+/* string may have leading insignificant zeros. If it has more than */
+/* DECPMAX digits then the final digit can be a round-for-reround */
+/* digit (i.e., it may include a sticky bit residue). */
+/* */
+/* The exponent (q) may be one of the codes for a special value and */
+/* can be up to 999999999 for conversion from string. */
+/* */
+/* No error is possible, but Inexact, Underflow, and/or Overflow may */
+/* be set. */
+/* ------------------------------------------------------------------ */
+/* Constant whose size varies with format; also the check for surprises */
+static uByte allnines[DECPMAX]=
+#if SINGLE
+ {9, 9, 9, 9, 9, 9, 9};
+#elif DOUBLE
+ {9, 9, 9, 9, 9, 9, 9, 9, 9, 9, 9, 9, 9, 9, 9, 9};
+#elif QUAD
+ {9, 9, 9, 9, 9, 9, 9, 9, 9, 9, 9, 9, 9, 9, 9, 9,
+ 9, 9, 9, 9, 9, 9, 9, 9, 9, 9, 9, 9, 9, 9, 9, 9, 9, 9};
+#endif
+
+static decFloat * decFinalize(decFloat *df, bcdnum *num,
+ decContext *set) {
+ uByte *ub; /* work */
+ uInt dpd; /* .. */
+ uByte *umsd=num->msd; /* local copy */
+ uByte *ulsd=num->lsd; /* .. */
+ uInt encode; /* encoding accumulator */
+ Int length; /* coefficient length */
+
+ #if DECCHECK
+ Int clen=ulsd-umsd+1;
+ #if QUAD
+ #define COEXTRA 2 /* extra-long coefficent */
+ #else
+ #define COEXTRA 0
+ #endif
+ if (clen<1 || clen>DECPMAX*3+2+COEXTRA)
+ printf("decFinalize: suspect coefficient [length=%ld]\n", (LI)clen);
+ if (num->sign!=0 && num->sign!=DECFLOAT_Sign)
+ printf("decFinalize: bad sign [%08lx]\n", (LI)num->sign);
+ if (!EXPISSPECIAL(num->exponent)
+ && (num->exponent>1999999999 || num->exponent<-1999999999))
+ printf("decFinalize: improbable exponent [%ld]\n", (LI)num->exponent);
+ /* decShowNum(num, "final"); */
+ #endif
+
+ /* A special will have an 'exponent' which is very positive and a */
+ /* coefficient < DECPMAX */
+ length=(uInt)(ulsd-umsd+1); /* coefficient length */
+
+ if (!NUMISSPECIAL(num)) {
+ Int drop; /* digits to be dropped */
+ /* skip leading insignificant zeros to calculate an exact length */
+ /* [this is quite expensive] */
+ if (*umsd==0) {
+ for (; UINTAT(umsd)==0 && umsd+3<ulsd;) umsd+=4;
+ for (; *umsd==0 && umsd<ulsd;) umsd++;
+ length=ulsd-umsd+1; /* recalculate */
+ }
+ drop=MAXI(length-DECPMAX, DECQTINY-num->exponent);
+ /* drop can now be > digits for bottom-clamp (subnormal) cases */
+ if (drop>0) { /* rounding needed */
+ /* (decFloatQuantize has very similar code to this, so any */
+ /* changes may need to be made there, too) */
+ uByte *roundat; /* -> re-round digit */
+ uByte reround; /* reround value */
+ /* printf("Rounding; drop=%ld\n", (LI)drop); */
+
+ num->exponent+=drop; /* always update exponent */
+
+ /* Three cases here: */
+ /* 1. new LSD is in coefficient (almost always) */
+ /* 2. new LSD is digit to left of coefficient (so MSD is */
+ /* round-for-reround digit) */
+ /* 3. new LSD is to left of case 2 (whole coefficient is sticky) */
+ /* [duplicate check-stickies code to save a test] */
+ /* [by-digit check for stickies as runs of zeros are rare] */
+ if (drop<length) { /* NB lengths not addresses */
+ roundat=umsd+length-drop;
+ reround=*roundat;
+ for (ub=roundat+1; ub<=ulsd; ub++) {
+ if (*ub!=0) { /* non-zero to be discarded */
+ reround=DECSTICKYTAB[reround]; /* apply sticky bit */
+ break; /* [remainder don't-care] */
+ }
+ } /* check stickies */
+ ulsd=roundat-1; /* new LSD */
+ }
+ else { /* edge case */
+ if (drop==length) {
+ roundat=umsd;
+ reround=*roundat;
+ }
+ else {
+ roundat=umsd-1;
+ reround=0;
+ }
+ for (ub=roundat+1; ub<=ulsd; ub++) {
+ if (*ub!=0) { /* non-zero to be discarded */
+ reround=DECSTICKYTAB[reround]; /* apply sticky bit */
+ break; /* [remainder don't-care] */
+ }
+ } /* check stickies */
+ *umsd=0; /* coefficient is a 0 */
+ ulsd=umsd; /* .. */
+ }
+
+ if (reround!=0) { /* discarding non-zero */
+ uInt bump=0;
+ set->status|=DEC_Inexact;
+ /* if adjusted exponent [exp+digits-1] is < EMIN then num is */
+ /* subnormal -- so raise Underflow */
+ if (num->exponent<DECEMIN && (num->exponent+(ulsd-umsd+1)-1)<DECEMIN)
+ set->status|=DEC_Underflow;
+
+ /* next decide whether increment of the coefficient is needed */
+ if (set->round==DEC_ROUND_HALF_EVEN) { /* fastpath slowest case */
+ if (reround>5) bump=1; /* >0.5 goes up */
+ else if (reround==5) /* exactly 0.5000 .. */
+ bump=*ulsd & 0x01; /* .. up iff [new] lsd is odd */
+ } /* r-h-e */
+ else switch (set->round) {
+ case DEC_ROUND_DOWN: {
+ /* no change */
+ break;} /* r-d */
+ case DEC_ROUND_HALF_DOWN: {
+ if (reround>5) bump=1;
+ break;} /* r-h-d */
+ case DEC_ROUND_HALF_UP: {
+ if (reround>=5) bump=1;
+ break;} /* r-h-u */
+ case DEC_ROUND_UP: {
+ if (reround>0) bump=1;
+ break;} /* r-u */
+ case DEC_ROUND_CEILING: {
+ /* same as _UP for positive numbers, and as _DOWN for negatives */
+ if (!num->sign && reround>0) bump=1;
+ break;} /* r-c */
+ case DEC_ROUND_FLOOR: {
+ /* same as _UP for negative numbers, and as _DOWN for positive */
+ /* [negative reround cannot occur on 0] */
+ if (num->sign && reround>0) bump=1;
+ break;} /* r-f */
+ case DEC_ROUND_05UP: {
+ if (reround>0) { /* anything out there is 'sticky' */
+ /* bump iff lsd=0 or 5; this cannot carry so it could be */
+ /* effected immediately with no bump -- but the code */
+ /* is clearer if this is done the same way as the others */
+ if (*ulsd==0 || *ulsd==5) bump=1;
+ }
+ break;} /* r-r */
+ default: { /* e.g., DEC_ROUND_MAX */
+ set->status|=DEC_Invalid_context;
+ #if DECCHECK
+ printf("Unknown rounding mode: %ld\n", (LI)set->round);
+ #endif
+ break;}
+ } /* switch (not r-h-e) */
+ /* printf("ReRound: %ld bump: %ld\n", (LI)reround, (LI)bump); */
+
+ if (bump!=0) { /* need increment */
+ /* increment the coefficient; this might end up with 1000... */
+ /* (after the all nines case) */
+ ub=ulsd;
+ for(; ub-3>=umsd && UINTAT(ub-3)==0x09090909; ub-=4) UINTAT(ub-3)=0;
+ /* [note ub could now be to left of msd, and it is not safe */
+ /* to write to the the left of the msd] */
+ /* now at most 3 digits left to non-9 (usually just the one) */
+ for (; ub>=umsd; *ub=0, ub--) {
+ if (*ub==9) continue; /* carry */
+ *ub+=1;
+ break;
+ }
+ if (ub<umsd) { /* had all-nines */
+ *umsd=1; /* coefficient to 1000... */
+ /* usually the 1000... coefficient can be used as-is */
+ if ((ulsd-umsd+1)==DECPMAX) {
+ num->exponent++;
+ }
+ else {
+ /* if coefficient is shorter than Pmax then num is */
+ /* subnormal, so extend it; this is safe as drop>0 */
+ /* (or, if the coefficient was supplied above, it could */
+ /* not be 9); this may make the result normal. */
+ ulsd++;
+ *ulsd=0;
+ /* [exponent unchanged] */
+ #if DECCHECK
+ if (num->exponent!=DECQTINY) /* sanity check */
+ printf("decFinalize: bad all-nines extend [^%ld, %ld]\n",
+ (LI)num->exponent, (LI)(ulsd-umsd+1));
+ #endif
+ } /* subnormal extend */
+ } /* had all-nines */
+ } /* bump needed */
+ } /* inexact rounding */
+
+ length=ulsd-umsd+1; /* recalculate (may be <DECPMAX) */
+ } /* need round (drop>0) */
+
+ /* The coefficient will now fit and has final length unless overflow */
+ /* decShowNum(num, "rounded"); */
+
+ /* if exponent is >=emax may have to clamp, overflow, or fold-down */
+ if (num->exponent>DECEMAX-(DECPMAX-1)) { /* is edge case */
+ /* printf("overflow checks...\n"); */
+ if (*ulsd==0 && ulsd==umsd) { /* have zero */
+ num->exponent=DECEMAX-(DECPMAX-1); /* clamp to max */
+ }
+ else if ((num->exponent+length-1)>DECEMAX) { /* > Nmax */
+ /* Overflow -- these could go straight to encoding, here, but */
+ /* instead num is adjusted to keep the code cleaner */
+ Flag needmax=0; /* 1 for finite result */
+ set->status|=(DEC_Overflow | DEC_Inexact);
+ switch (set->round) {
+ case DEC_ROUND_DOWN: {
+ needmax=1; /* never Infinity */
+ break;} /* r-d */
+ case DEC_ROUND_05UP: {
+ needmax=1; /* never Infinity */
+ break;} /* r-05 */
+ case DEC_ROUND_CEILING: {
+ if (num->sign) needmax=1; /* Infinity iff non-negative */
+ break;} /* r-c */
+ case DEC_ROUND_FLOOR: {
+ if (!num->sign) needmax=1; /* Infinity iff negative */
+ break;} /* r-f */
+ default: break; /* Infinity in all other cases */
+ }
+ if (!needmax) { /* easy .. set Infinity */
+ num->exponent=DECFLOAT_Inf;
+ *umsd=0; /* be clean: coefficient to 0 */
+ ulsd=umsd; /* .. */
+ }
+ else { /* return Nmax */
+ umsd=allnines; /* use constant array */
+ ulsd=allnines+DECPMAX-1;
+ num->exponent=DECEMAX-(DECPMAX-1);
+ }
+ }
+ else { /* no overflow but non-zero and may have to fold-down */
+ Int shift=num->exponent-(DECEMAX-(DECPMAX-1));
+ if (shift>0) { /* fold-down needed */
+ /* fold down needed; must copy to buffer in order to pad */
+ /* with zeros safely; fortunately this is not the worst case */
+ /* path because cannot have had a round */
+ uByte buffer[ROUNDUP(DECPMAX+3, 4)]; /* [+3 allows uInt padding] */
+ uByte *s=umsd; /* source */
+ uByte *t=buffer; /* safe target */
+ uByte *tlsd=buffer+(ulsd-umsd)+shift; /* target LSD */
+ /* printf("folddown shift=%ld\n", (LI)shift); */
+ for (; s<=ulsd; s+=4, t+=4) UINTAT(t)=UINTAT(s);
+ for (t=tlsd-shift+1; t<=tlsd; t+=4) UINTAT(t)=0; /* pad */
+ num->exponent-=shift;
+ umsd=buffer;
+ ulsd=tlsd;
+ }
+ } /* fold-down? */
+ length=ulsd-umsd+1; /* recalculate length */
+ } /* high-end edge case */
+ } /* finite number */
+
+ /*------------------------------------------------------------------*/
+ /* At this point the result will properly fit the decFloat */
+ /* encoding, and it can be encoded with no possibility of error */
+ /*------------------------------------------------------------------*/
+ /* Following code does not alter coefficient (could be allnines array) */
+
+ if (length==DECPMAX) {
+ return decFloatFromBCD(df, num->exponent, umsd, num->sign);
+ }
+
+ /* Here when length is short */
+ if (!NUMISSPECIAL(num)) { /* is still finite */
+ /* encode the combination field and exponent continuation */
+ uInt uexp=(uInt)(num->exponent+DECBIAS); /* biased exponent */
+ uInt code=(uexp>>DECECONL)<<4; /* top two bits of exp */
+ /* [msd=0] */
+ /* look up the combination field and make high word */
+ encode=DECCOMBFROM[code]; /* indexed by (0-2)*16+msd */
+ encode|=(uexp<<(32-6-DECECONL)) & 0x03ffffff; /* exponent continuation */
+ }
+ else encode=num->exponent; /* special [already in word] */
+ /* [coefficient length here will be < DECPMAX] */
+
+ encode|=num->sign; /* add sign */
+
+ /* private macro to extract a declet, n (where 0<=n<DECLETS and 0 */
+ /* refers to the declet from the least significant three digits) */
+ /* and put the corresponding DPD code into dpd. Access to umsd and */
+ /* ulsd (pointers to the most and least significant digit of the */
+ /* variable-length coefficient) is assumed, along with use of a */
+ /* working pointer, uInt *ub. */
+ /* As not full-length then chances are there are many leading zeros */
+ /* [and there may be a partial triad] */
+ #define getDPD(dpd, n) ub=ulsd-(3*(n))-2; \
+ if (ub<umsd-2) dpd=0; \
+ else if (ub>=umsd) dpd=BCD2DPD[(*ub*256)+(*(ub+1)*16)+*(ub+2)]; \
+ else {dpd=*(ub+2); if (ub+1==umsd) dpd+=*(ub+1)*16; dpd=BCD2DPD[dpd];}
+
+ /* place the declets in the encoding words and copy to result (df), */
+ /* according to endianness; in all cases complete the sign word */
+ /* first */
+ #if DECPMAX==7
+ getDPD(dpd, 1);
+ encode|=dpd<<10;
+ getDPD(dpd, 0);
+ encode|=dpd;
+ DFWORD(df, 0)=encode; /* just the one word */
+
+ #elif DECPMAX==16
+ getDPD(dpd, 4); encode|=dpd<<8;
+ getDPD(dpd, 3); encode|=dpd>>2;
+ DFWORD(df, 0)=encode;
+ encode=dpd<<30;
+ getDPD(dpd, 2); encode|=dpd<<20;
+ getDPD(dpd, 1); encode|=dpd<<10;
+ getDPD(dpd, 0); encode|=dpd;
+ DFWORD(df, 1)=encode;
+
+ #elif DECPMAX==34
+ getDPD(dpd,10); encode|=dpd<<4;
+ getDPD(dpd, 9); encode|=dpd>>6;
+ DFWORD(df, 0)=encode;
+
+ encode=dpd<<26;
+ getDPD(dpd, 8); encode|=dpd<<16;
+ getDPD(dpd, 7); encode|=dpd<<6;
+ getDPD(dpd, 6); encode|=dpd>>4;
+ DFWORD(df, 1)=encode;
+
+ encode=dpd<<28;
+ getDPD(dpd, 5); encode|=dpd<<18;
+ getDPD(dpd, 4); encode|=dpd<<8;
+ getDPD(dpd, 3); encode|=dpd>>2;
+ DFWORD(df, 2)=encode;
+
+ encode=dpd<<30;
+ getDPD(dpd, 2); encode|=dpd<<20;
+ getDPD(dpd, 1); encode|=dpd<<10;
+ getDPD(dpd, 0); encode|=dpd;
+ DFWORD(df, 3)=encode;
+ #endif
+
+ /* printf("Status: %08lx\n", (LI)set->status); */
+ /* decFloatShow(df, "final"); */
+ return df;
+ } /* decFinalize */
+
+/* ------------------------------------------------------------------ */
+/* decFloatFromBCD -- set decFloat from exponent, BCD8, and sign */
+/* */
+/* df is the target decFloat */
+/* exp is the in-range unbiased exponent, q, or a special value in */
+/* the form returned by decFloatGetExponent */
+/* bcdar holds DECPMAX digits to set the coefficient from, one */
+/* digit in each byte (BCD8 encoding); the first (MSD) is ignored */
+/* if df is a NaN; all are ignored if df is infinite. */
+/* All bytes must be in 0-9; results undefined otherwise. */
+/* sig is DECFLOAT_Sign to set the sign bit, 0 otherwise */
+/* returns df, which will be canonical */
+/* */
+/* No error is possible, and no status will be set. */
+/* ------------------------------------------------------------------ */
+decFloat * decFloatFromBCD(decFloat *df, Int exp, const uByte *bcdar,
+ Int sig) {
+ uInt encode, dpd; /* work */
+ const uByte *ub; /* .. */
+
+ if (EXPISSPECIAL(exp)) encode=exp|sig;/* specials already encoded */
+ else { /* is finite */
+ /* encode the combination field and exponent continuation */
+ uInt uexp=(uInt)(exp+DECBIAS); /* biased exponent */
+ uInt code=(uexp>>DECECONL)<<4; /* top two bits of exp */
+ code+=bcdar[0]; /* add msd */
+ /* look up the combination field and make high word */
+ encode=DECCOMBFROM[code]|sig; /* indexed by (0-2)*16+msd */
+ encode|=(uexp<<(32-6-DECECONL)) & 0x03ffffff; /* exponent continuation */
+ }
+
+ /* private macro to extract a declet, n (where 0<=n<DECLETS and 0 */
+ /* refers to the declet from the least significant three digits) */
+ /* and put the corresponding DPD code into dpd. */
+ /* Use of a working pointer, uInt *ub, is assumed. */
+
+ #define getDPDf(dpd, n) ub=bcdar+DECPMAX-1-(3*(n))-2; \
+ dpd=BCD2DPD[(*ub*256)+(*(ub+1)*16)+*(ub+2)];
+
+ /* place the declets in the encoding words and copy to result (df), */
+ /* according to endianness; in all cases complete the sign word */
+ /* first */
+ #if DECPMAX==7
+ getDPDf(dpd, 1);
+ encode|=dpd<<10;
+ getDPDf(dpd, 0);
+ encode|=dpd;
+ DFWORD(df, 0)=encode; /* just the one word */
+
+ #elif DECPMAX==16
+ getDPDf(dpd, 4); encode|=dpd<<8;
+ getDPDf(dpd, 3); encode|=dpd>>2;
+ DFWORD(df, 0)=encode;
+ encode=dpd<<30;
+ getDPDf(dpd, 2); encode|=dpd<<20;
+ getDPDf(dpd, 1); encode|=dpd<<10;
+ getDPDf(dpd, 0); encode|=dpd;
+ DFWORD(df, 1)=encode;
+
+ #elif DECPMAX==34
+ getDPDf(dpd,10); encode|=dpd<<4;
+ getDPDf(dpd, 9); encode|=dpd>>6;
+ DFWORD(df, 0)=encode;
+
+ encode=dpd<<26;
+ getDPDf(dpd, 8); encode|=dpd<<16;
+ getDPDf(dpd, 7); encode|=dpd<<6;
+ getDPDf(dpd, 6); encode|=dpd>>4;
+ DFWORD(df, 1)=encode;
+
+ encode=dpd<<28;
+ getDPDf(dpd, 5); encode|=dpd<<18;
+ getDPDf(dpd, 4); encode|=dpd<<8;
+ getDPDf(dpd, 3); encode|=dpd>>2;
+ DFWORD(df, 2)=encode;
+
+ encode=dpd<<30;
+ getDPDf(dpd, 2); encode|=dpd<<20;
+ getDPDf(dpd, 1); encode|=dpd<<10;
+ getDPDf(dpd, 0); encode|=dpd;
+ DFWORD(df, 3)=encode;
+ #endif
+ /* decFloatShow(df, "final"); */
+ return df;
+ } /* decFloatFromBCD */
+
+/* ------------------------------------------------------------------ */
+/* decFloatFromPacked -- set decFloat from exponent and packed BCD */
+/* */
+/* df is the target decFloat */
+/* exp is the in-range unbiased exponent, q, or a special value in */
+/* the form returned by decFloatGetExponent */
+/* packed holds DECPMAX packed decimal digits plus a sign nibble */
+/* (all 6 codes are OK); the first (MSD) is ignored if df is a NaN */
+/* and all except sign are ignored if df is infinite. For DOUBLE */
+/* and QUAD the first (pad) nibble is also ignored in all cases. */
+/* All coefficient nibbles must be in 0-9 and sign in A-F; results */
+/* are undefined otherwise. */
+/* returns df, which will be canonical */
+/* */
+/* No error is possible, and no status will be set. */
+/* ------------------------------------------------------------------ */
+decFloat * decFloatFromPacked(decFloat *df, Int exp, const uByte *packed) {
+ uByte bcdar[DECPMAX+2]; /* work [+1 for pad, +1 for sign] */
+ const uByte *ip; /* .. */
+ uByte *op; /* .. */
+ Int sig=0; /* sign */
+
+ /* expand coefficient and sign to BCDAR */
+ #if SINGLE
+ op=bcdar+1; /* no pad digit */
+ #else
+ op=bcdar; /* first (pad) digit ignored */
+ #endif
+ for (ip=packed; ip<packed+((DECPMAX+2)/2); ip++) {
+ *op++=*ip>>4;
+ *op++=(uByte)(*ip&0x0f); /* [final nibble is sign] */
+ }
+ op--; /* -> sign byte */
+ if (*op==DECPMINUS || *op==DECPMINUSALT) sig=DECFLOAT_Sign;
+
+ if (EXPISSPECIAL(exp)) { /* Infinity or NaN */
+ if (!EXPISINF(exp)) bcdar[1]=0; /* a NaN: ignore MSD */
+ else memset(bcdar+1, 0, DECPMAX); /* Infinite: coefficient to 0 */
+ }
+ return decFloatFromBCD(df, exp, bcdar+1, sig);
+ } /* decFloatFromPacked */
+
+/* ------------------------------------------------------------------ */
+/* decFloatFromString -- conversion from numeric string */
+/* */
+/* result is the decFloat format number which gets the result of */
+/* the conversion */
+/* *string is the character string which should contain a valid */
+/* number (which may be a special value), \0-terminated */
+/* If there are too many significant digits in the */
+/* coefficient it will be rounded. */
+/* set is the context */
+/* returns result */
+/* */
+/* The length of the coefficient and the size of the exponent are */
+/* checked by this routine, so the correct error (Underflow or */
+/* Overflow) can be reported or rounding applied, as necessary. */
+/* */
+/* There is no limit to the coefficient length for finite inputs; */
+/* NaN payloads must be integers with no more than DECPMAX-1 digits. */
+/* Exponents may have up to nine significant digits. */
+/* */
+/* If bad syntax is detected, the result will be a quiet NaN. */
+/* ------------------------------------------------------------------ */
+decFloat * decFloatFromString(decFloat *result, const char *string,
+ decContext *set) {
+ Int digits; /* count of digits in coefficient */
+ const char *dotchar=NULL; /* where dot was found [NULL if none] */
+ const char *cfirst=string; /* -> first character of decimal part */
+ const char *c; /* work */
+ uByte *ub; /* .. */
+ bcdnum num; /* collects data for finishing */
+ uInt error=DEC_Conversion_syntax; /* assume the worst */
+ uByte buffer[ROUNDUP(DECSTRING+11, 8)]; /* room for most coefficents, */
+ /* some common rounding, +3, & pad */
+ #if DECTRACE
+ /* printf("FromString %s ...\n", string); */
+ #endif
+
+ for(;;) { /* once-only 'loop' */
+ num.sign=0; /* assume non-negative */
+ num.msd=buffer; /* MSD is here always */
+
+ /* detect and validate the coefficient, including any leading, */
+ /* trailing, or embedded '.' */
+ /* [could test four-at-a-time here (saving 10% for decQuads), */
+ /* but that risks storage violation because the position of the */
+ /* terminator is unknown] */
+ for (c=string;; c++) { /* -> input character */
+ if (((unsigned)(*c-'0'))<=9) continue; /* '0' through '9' is good */
+ if (*c=='\0') break; /* most common non-digit */
+ if (*c=='.') {
+ if (dotchar!=NULL) break; /* not first '.' */
+ dotchar=c; /* record offset into decimal part */
+ continue;}
+ if (c==string) { /* first in string... */
+ if (*c=='-') { /* valid - sign */
+ cfirst++;
+ num.sign=DECFLOAT_Sign;
+ continue;}
+ if (*c=='+') { /* valid + sign */
+ cfirst++;
+ continue;}
+ }
+ /* *c is not a digit, terminator, or a valid +, -, or '.' */
+ break;
+ } /* c loop */
+
+ digits=(uInt)(c-cfirst); /* digits (+1 if a dot) */
+
+ if (digits>0) { /* had digits and/or dot */
+ const char *clast=c-1; /* note last coefficient char position */
+ Int exp=0; /* exponent accumulator */
+ if (*c!='\0') { /* something follows the coefficient */
+ uInt edig; /* unsigned work */
+ /* had some digits and more to come; expect E[+|-]nnn now */
+ const char *firstexp; /* exponent first non-zero */
+ if (*c!='E' && *c!='e') break;
+ c++; /* to (optional) sign */
+ if (*c=='-' || *c=='+') c++; /* step over sign (c=clast+2) */
+ if (*c=='\0') break; /* no digits! (e.g., '1.2E') */
+ for (; *c=='0';) c++; /* skip leading zeros [even last] */
+ firstexp=c; /* remember start [maybe '\0'] */
+ /* gather exponent digits */
+ edig=(uInt)*c-(uInt)'0';
+ if (edig<=9) { /* [check not bad or terminator] */
+ exp+=edig; /* avoid initial X10 */
+ c++;
+ for (;; c++) {
+ edig=(uInt)*c-(uInt)'0';
+ if (edig>9) break;
+ exp=exp*10+edig;
+ }
+ }
+ /* if not now on the '\0', *c must not be a digit */
+ if (*c!='\0') break;
+
+ /* (this next test must be after the syntax checks) */
+ /* if definitely more than the possible digits for format then */
+ /* the exponent may have wrapped, so simply set it to a certain */
+ /* over/underflow value */
+ if (c>firstexp+DECEMAXD) exp=DECEMAX*2;
+ if (*(clast+2)=='-') exp=-exp; /* was negative */
+ } /* digits>0 */
+
+ if (dotchar!=NULL) { /* had a '.' */
+ digits--; /* remove from digits count */
+ if (digits==0) break; /* was dot alone: bad syntax */
+ exp-=(Int)(clast-dotchar); /* adjust exponent */
+ /* [the '.' can now be ignored] */
+ }
+ num.exponent=exp; /* exponent is good; store it */
+
+ /* Here when whole string has been inspected and syntax is good */
+ /* cfirst->first digit or dot, clast->last digit or dot */
+ error=0; /* no error possible now */
+
+ /* if the number of digits in the coefficient will fit in buffer */
+ /* then it can simply be converted to bcd8 and copied -- decFinalize */
+ /* will take care of leading zeros and rounding; the buffer is big */
+ /* enough for all canonical coefficients, including 0.00000nn... */
+ ub=buffer;
+ if (digits<=(Int)(sizeof(buffer)-3)) { /* [-3 allows by-4s copy] */
+ c=cfirst;
+ if (dotchar!=NULL) { /* a dot to worry about */
+ if (*(c+1)=='.') { /* common canonical case */
+ *ub++=(uByte)(*c-'0'); /* copy leading digit */
+ c+=2; /* prepare to handle rest */
+ }
+ else for (; c<=clast;) { /* '.' could be anywhere */
+ /* as usual, go by fours when safe; NB it has been asserted */
+ /* that a '.' does not have the same mask as a digit */
+ if (c<=clast-3 /* safe for four */
+ && (UINTAT(c)&0xf0f0f0f0)==CHARMASK) { /* test four */
+ UINTAT(ub)=UINTAT(c)&0x0f0f0f0f; /* to BCD8 */
+ ub+=4;
+ c+=4;
+ continue;
+ }
+ if (*c=='.') { /* found the dot */
+ c++; /* step over it .. */
+ break; /* .. and handle the rest */
+ }
+ *ub++=(uByte)(*c++-'0');
+ }
+ } /* had dot */
+ /* Now no dot; do this by fours (where safe) */
+ for (; c<=clast-3; c+=4, ub+=4) UINTAT(ub)=UINTAT(c)&0x0f0f0f0f;
+ for (; c<=clast; c++, ub++) *ub=(uByte)(*c-'0');
+ num.lsd=buffer+digits-1; /* record new LSD */
+ } /* fits */
+
+ else { /* too long for buffer */
+ /* [This is a rare and unusual case; arbitrary-length input] */
+ /* strip leading zeros [but leave final 0 if all 0's] */
+ if (*cfirst=='.') cfirst++; /* step past dot at start */
+ if (*cfirst=='0') { /* [cfirst always -> digit] */
+ for (; cfirst<clast; cfirst++) {
+ if (*cfirst!='0') { /* non-zero found */
+ if (*cfirst=='.') continue; /* [ignore] */
+ break; /* done */
+ }
+ digits--; /* 0 stripped */
+ } /* cfirst */
+ } /* at least one leading 0 */
+
+ /* the coefficient is now as short as possible, but may still */
+ /* be too long; copy up to Pmax+1 digits to the buffer, then */
+ /* just record any non-zeros (set round-for-reround digit) */
+ for (c=cfirst; c<=clast && ub<=buffer+DECPMAX; c++) {
+ /* (see commentary just above) */
+ if (c<=clast-3 /* safe for four */
+ && (UINTAT(c)&0xf0f0f0f0)==CHARMASK) { /* four digits */
+ UINTAT(ub)=UINTAT(c)&0x0f0f0f0f; /* to BCD8 */
+ ub+=4;
+ c+=3; /* [will become 4] */
+ continue;
+ }
+ if (*c=='.') continue; /* [ignore] */
+ *ub++=(uByte)(*c-'0');
+ }
+ ub--; /* -> LSD */
+ for (; c<=clast; c++) { /* inspect remaining chars */
+ if (*c!='0') { /* sticky bit needed */
+ if (*c=='.') continue; /* [ignore] */
+ *ub=DECSTICKYTAB[*ub]; /* update round-for-reround */
+ break; /* no need to look at more */
+ }
+ }
+ num.lsd=ub; /* record LSD */
+ /* adjust exponent for dropped digits */
+ num.exponent+=digits-(Int)(ub-buffer+1);
+ } /* too long for buffer */
+ } /* digits or dot */
+
+ else { /* no digits or dot were found */
+ if (*c=='\0') break; /* nothing to come is bad */
+ /* only Infinities and NaNs are allowed, here */
+ buffer[0]=0; /* default a coefficient of 0 */
+ num.lsd=buffer; /* .. */
+ if (decBiStr(c, "infinity", "INFINITY")
+ || decBiStr(c, "inf", "INF")) num.exponent=DECFLOAT_Inf;
+ else { /* should be a NaN */
+ num.exponent=DECFLOAT_qNaN; /* assume quiet NaN */
+ if (*c=='s' || *c=='S') { /* probably an sNaN */
+ c++;
+ num.exponent=DECFLOAT_sNaN; /* assume is in fact sNaN */
+ }
+ if (*c!='N' && *c!='n') break; /* check caseless "NaN" */
+ c++;
+ if (*c!='a' && *c!='A') break; /* .. */
+ c++;
+ if (*c!='N' && *c!='n') break; /* .. */
+ c++;
+ /* now either nothing, or nnnn payload (no dots), expected */
+ /* -> start of integer, and skip leading 0s [including plain 0] */
+ for (cfirst=c; *cfirst=='0';) cfirst++;
+ if (*cfirst!='\0') { /* not empty or all-0, payload */
+ /* payload found; check all valid digits and copy to buffer as bcd8 */
+ ub=buffer;
+ for (c=cfirst;; c++, ub++) {
+ if ((unsigned)(*c-'0')>9) break; /* quit if not 0-9 */
+ if (c-cfirst==DECPMAX-1) break; /* too many digits */
+ *ub=(uByte)(*c-'0'); /* good bcd8 */
+ }
+ if (*c!='\0') break; /* not all digits, or too many */
+ num.lsd=ub-1; /* record new LSD */
+ }
+ } /* NaN or sNaN */
+ error=0; /* syntax is OK */
+ break; /* done with specials */
+ } /* digits=0 (special expected) */
+ break;
+ } /* [for(;;) break] */
+
+ /* decShowNum(&num, "fromStr"); */
+
+ if (error!=0) {
+ set->status|=error;
+ num.exponent=DECFLOAT_qNaN; /* set up quiet NaN */
+ num.sign=0; /* .. with 0 sign */
+ buffer[0]=0; /* .. and coefficient */
+ num.lsd=buffer; /* .. */
+ /* decShowNum(&num, "oops"); */
+ }
+
+ /* decShowNum(&num, "dffs"); */
+ decFinalize(result, &num, set); /* round, check, and lay out */
+ /* decFloatShow(result, "fromString"); */
+ return result;
+ } /* decFloatFromString */
+
+/* ------------------------------------------------------------------ */
+/* decFloatFromWider -- conversion from next-wider format */
+/* */
+/* result is the decFloat format number which gets the result of */
+/* the conversion */
+/* wider is the decFloatWider format number which will be narrowed */
+/* set is the context */
+/* returns result */
+/* */
+/* Narrowing can cause rounding, overflow, etc., but not Invalid */
+/* operation (sNaNs are copied and do not signal). */
+/* ------------------------------------------------------------------ */
+/* narrow-to is not possible for decQuad format numbers; simply omit */
+#if !QUAD
+decFloat * decFloatFromWider(decFloat *result, const decFloatWider *wider,
+ decContext *set) {
+ bcdnum num; /* collects data for finishing */
+ uByte bcdar[DECWPMAX]; /* room for wider coefficient */
+ uInt widerhi=DFWWORD(wider, 0); /* top word */
+ Int exp;
+
+ GETWCOEFF(wider, bcdar);
+
+ num.msd=bcdar; /* MSD is here always */
+ num.lsd=bcdar+DECWPMAX-1; /* LSD is here always */
+ num.sign=widerhi&0x80000000; /* extract sign [DECFLOAT_Sign=Neg] */
+
+ /* decode the wider combination field to exponent */
+ exp=DECCOMBWEXP[widerhi>>26]; /* decode from wider combination field */
+ /* if it is a special there's nothing to do unless sNaN; if it's */
+ /* finite then add the (wider) exponent continuation and unbias */
+ if (EXPISSPECIAL(exp)) exp=widerhi&0x7e000000; /* include sNaN selector */
+ else exp+=GETWECON(wider)-DECWBIAS;
+ num.exponent=exp;
+
+ /* decShowNum(&num, "dffw"); */
+ return decFinalize(result, &num, set);/* round, check, and lay out */
+ } /* decFloatFromWider */
+#endif
+
+/* ------------------------------------------------------------------ */
+/* decFloatGetCoefficient -- get coefficient as BCD8 */
+/* */
+/* df is the decFloat from which to extract the coefficient */
+/* bcdar is where DECPMAX bytes will be written, one BCD digit in */
+/* each byte (BCD8 encoding); if df is a NaN the first byte will */
+/* be zero, and if it is infinite they will all be zero */
+/* returns the sign of the coefficient (DECFLOAT_Sign if negative, */
+/* 0 otherwise) */
+/* */
+/* No error is possible, and no status will be set. If df is a */
+/* special value the array is set to zeros (for Infinity) or to the */
+/* payload of a qNaN or sNaN. */
+/* ------------------------------------------------------------------ */
+Int decFloatGetCoefficient(const decFloat *df, uByte *bcdar) {
+ if (DFISINF(df)) memset(bcdar, 0, DECPMAX);
+ else {
+ GETCOEFF(df, bcdar); /* use macro */
+ if (DFISNAN(df)) bcdar[0]=0; /* MSD needs correcting */
+ }
+ return DFISSIGNED(df);
+ } /* decFloatGetCoefficient */
+
+/* ------------------------------------------------------------------ */
+/* decFloatGetExponent -- get unbiased exponent */
+/* */
+/* df is the decFloat from which to extract the exponent */
+/* returns the exponent, q. */
+/* */
+/* No error is possible, and no status will be set. If df is a */
+/* special value the first seven bits of the decFloat are returned, */
+/* left adjusted and with the first (sign) bit set to 0 (followed by */
+/* 25 0 bits). e.g., -sNaN would return 0x7e000000 (DECFLOAT_sNaN). */
+/* ------------------------------------------------------------------ */
+Int decFloatGetExponent(const decFloat *df) {
+ if (DFISSPECIAL(df)) return DFWORD(df, 0)&0x7e000000;
+ return GETEXPUN(df);
+ } /* decFloatGetExponent */
+
+/* ------------------------------------------------------------------ */
+/* decFloatSetCoefficient -- set coefficient from BCD8 */
+/* */
+/* df is the target decFloat (and source of exponent/special value) */
+/* bcdar holds DECPMAX digits to set the coefficient from, one */
+/* digit in each byte (BCD8 encoding); the first (MSD) is ignored */
+/* if df is a NaN; all are ignored if df is infinite. */
+/* sig is DECFLOAT_Sign to set the sign bit, 0 otherwise */
+/* returns df, which will be canonical */
+/* */
+/* No error is possible, and no status will be set. */
+/* ------------------------------------------------------------------ */
+decFloat * decFloatSetCoefficient(decFloat *df, const uByte *bcdar,
+ Int sig) {
+ uInt exp; /* for exponent */
+ uByte bcdzero[DECPMAX]; /* for infinities */
+
+ /* Exponent/special code is extracted from df */
+ if (DFISSPECIAL(df)) {
+ exp=DFWORD(df, 0)&0x7e000000;
+ if (DFISINF(df)) {
+ memset(bcdzero, 0, DECPMAX);
+ return decFloatFromBCD(df, exp, bcdzero, sig);
+ }
+ }
+ else exp=GETEXPUN(df);
+ return decFloatFromBCD(df, exp, bcdar, sig);
+ } /* decFloatSetCoefficient */
+
+/* ------------------------------------------------------------------ */
+/* decFloatSetExponent -- set exponent or special value */
+/* */
+/* df is the target decFloat (and source of coefficient/payload) */
+/* set is the context for reporting status */
+/* exp is the unbiased exponent, q, or a special value in the form */
+/* returned by decFloatGetExponent */
+/* returns df, which will be canonical */
+/* */
+/* No error is possible, but Overflow or Underflow might occur. */
+/* ------------------------------------------------------------------ */
+decFloat * decFloatSetExponent(decFloat *df, decContext *set, Int exp) {
+ uByte bcdcopy[DECPMAX]; /* for coefficient */
+ bcdnum num; /* work */
+ num.exponent=exp;
+ num.sign=decFloatGetCoefficient(df, bcdcopy); /* extract coefficient */
+ if (DFISSPECIAL(df)) { /* MSD or more needs correcting */
+ if (DFISINF(df)) memset(bcdcopy, 0, DECPMAX);
+ bcdcopy[0]=0;
+ }
+ num.msd=bcdcopy;
+ num.lsd=bcdcopy+DECPMAX-1;
+ return decFinalize(df, &num, set);
+ } /* decFloatSetExponent */
+
+/* ------------------------------------------------------------------ */
+/* decFloatRadix -- returns the base (10) */
+/* */
+/* df is any decFloat of this format */
+/* ------------------------------------------------------------------ */
+uInt decFloatRadix(const decFloat *df) {
+ if (df) return 10; /* to placate compiler */
+ return 10;
+ } /* decFloatRadix */
+
+/* ------------------------------------------------------------------ */
+/* decFloatShow -- printf a decFloat in hexadecimal and decimal */
+/* df is the decFloat to show */
+/* tag is a tag string displayed with the number */
+/* */
+/* This is a debug aid; the precise format of the string may change. */
+/* ------------------------------------------------------------------ */
+void decFloatShow(const decFloat *df, const char *tag) {
+ char hexbuf[DECBYTES*2+DECBYTES/4+1]; /* NB blank after every fourth */
+ char buff[DECSTRING]; /* for value in decimal */
+ Int i, j=0;
+
+ for (i=0; i<DECBYTES; i++) {
+ #if DECLITEND
+ sprintf(&hexbuf[j], "%02x", df->bytes[DECBYTES-1-i]);
+ #else
+ sprintf(&hexbuf[j], "%02x", df->bytes[i]);
+ #endif
+ j+=2;
+ /* the next line adds blank (and terminator) after final pair, too */
+ if ((i+1)%4==0) {strcpy(&hexbuf[j], " "); j++;}
+ }
+ decFloatToString(df, buff);
+ printf(">%s> %s [big-endian] %s\n", tag, hexbuf, buff);
+ return;
+ } /* decFloatShow */
+
+/* ------------------------------------------------------------------ */
+/* decFloatToBCD -- get sign, exponent, and BCD8 from a decFloat */
+/* */
+/* df is the source decFloat */
+/* exp will be set to the unbiased exponent, q, or to a special */
+/* value in the form returned by decFloatGetExponent */
+/* bcdar is where DECPMAX bytes will be written, one BCD digit in */
+/* each byte (BCD8 encoding); if df is a NaN the first byte will */
+/* be zero, and if it is infinite they will all be zero */
+/* returns the sign of the coefficient (DECFLOAT_Sign if negative, */
+/* 0 otherwise) */
+/* */
+/* No error is possible, and no status will be set. */
+/* ------------------------------------------------------------------ */
+Int decFloatToBCD(const decFloat *df, Int *exp, uByte *bcdar) {
+ if (DFISINF(df)) {
+ memset(bcdar, 0, DECPMAX);
+ *exp=DFWORD(df, 0)&0x7e000000;
+ }
+ else {
+ GETCOEFF(df, bcdar); /* use macro */
+ if (DFISNAN(df)) {
+ bcdar[0]=0; /* MSD needs correcting */
+ *exp=DFWORD(df, 0)&0x7e000000;
+ }
+ else { /* finite */
+ *exp=GETEXPUN(df);
+ }
+ }
+ return DFISSIGNED(df);
+ } /* decFloatToBCD */
+
+/* ------------------------------------------------------------------ */
+/* decFloatToEngString -- conversion to numeric string, engineering */
+/* */
+/* df is the decFloat format number to convert */
+/* string is the string where the result will be laid out */
+/* */
+/* string must be at least DECPMAX+9 characters (the worst case is */
+/* "-0.00000nnn...nnn\0", which is as long as the exponent form when */
+/* DECEMAXD<=4); this condition is asserted above */
+/* */
+/* No error is possible, and no status will be set */
+/* ------------------------------------------------------------------ */
+char * decFloatToEngString(const decFloat *df, char *string){
+ uInt msd; /* coefficient MSD */
+ Int exp; /* exponent top two bits or full */
+ uInt comb; /* combination field */
+ char *cstart; /* coefficient start */
+ char *c; /* output pointer in string */
+ char *s, *t; /* .. (source, target) */
+ Int pre, e; /* work */
+ const uByte *u; /* .. */
+
+ /* Source words; macro handles endianness */
+ uInt sourhi=DFWORD(df, 0); /* word with sign */
+ #if DECPMAX==16
+ uInt sourlo=DFWORD(df, 1);
+ #elif DECPMAX==34
+ uInt sourmh=DFWORD(df, 1);
+ uInt sourml=DFWORD(df, 2);
+ uInt sourlo=DFWORD(df, 3);
+ #endif
+
+ c=string; /* where result will go */
+ if (((Int)sourhi)<0) *c++='-'; /* handle sign */
+ comb=sourhi>>26; /* sign+combination field */
+ msd=DECCOMBMSD[comb]; /* decode the combination field */
+ exp=DECCOMBEXP[comb]; /* .. */
+
+ if (EXPISSPECIAL(exp)) { /* special */
+ if (exp==DECFLOAT_Inf) { /* infinity */
+ strcpy(c, "Inf");
+ strcpy(c+3, "inity");
+ return string; /* easy */
+ }
+ if (sourhi&0x02000000) *c++='s'; /* sNaN */
+ strcpy(c, "NaN"); /* complete word */
+ c+=3; /* step past */
+ /* quick exit if the payload is zero */
+ #if DECPMAX==7
+ if ((sourhi&0x000fffff)==0) return string;
+ #elif DECPMAX==16
+ if (sourlo==0 && (sourhi&0x0003ffff)==0) return string;
+ #elif DECPMAX==34
+ if (sourlo==0 && sourml==0 && sourmh==0
+ && (sourhi&0x00003fff)==0) return string;
+ #endif
+ /* otherwise drop through to add integer; set correct exp etc. */
+ exp=0; msd=0; /* setup for following code */
+ }
+ else { /* complete exponent; top two bits are in place */
+ exp+=GETECON(df)-DECBIAS; /* .. + continuation and unbias */
+ }
+
+ /* convert the digits of the significand to characters */
+ cstart=c; /* save start of coefficient */
+ if (msd) *c++=(char)('0'+(char)msd); /* non-zero most significant digit */
+
+ /* Decode the declets. After extracting each declet, it is */
+ /* decoded to a 4-uByte sequence by table lookup; the four uBytes */
+ /* are the three encoded BCD8 digits followed by a 1-byte length */
+ /* (significant digits, except that 000 has length 0). This allows */
+ /* us to left-align the first declet with non-zero content, then */
+ /* the remaining ones are full 3-char length. Fixed-length copies */
+ /* are used because variable-length memcpy causes a subroutine call */
+ /* in at least two compilers. (The copies are length 4 for speed */
+ /* and are safe because the last item in the array is of length */
+ /* three and has the length byte following.) */
+ #define dpd2char(dpdin) u=&DPD2BCD8[((dpdin)&0x3ff)*4]; \
+ if (c!=cstart) {UINTAT(c)=UINTAT(u)|CHARMASK; c+=3;} \
+ else if (*(u+3)) { \
+ UINTAT(c)=UINTAT(u+3-*(u+3))|CHARMASK; c+=*(u+3);}
+
+ #if DECPMAX==7
+ dpd2char(sourhi>>10); /* declet 1 */
+ dpd2char(sourhi); /* declet 2 */
+
+ #elif DECPMAX==16
+ dpd2char(sourhi>>8); /* declet 1 */
+ dpd2char((sourhi<<2) | (sourlo>>30)); /* declet 2 */
+ dpd2char(sourlo>>20); /* declet 3 */
+ dpd2char(sourlo>>10); /* declet 4 */
+ dpd2char(sourlo); /* declet 5 */
+
+ #elif DECPMAX==34
+ dpd2char(sourhi>>4); /* declet 1 */
+ dpd2char((sourhi<<6) | (sourmh>>26)); /* declet 2 */
+ dpd2char(sourmh>>16); /* declet 3 */
+ dpd2char(sourmh>>6); /* declet 4 */
+ dpd2char((sourmh<<4) | (sourml>>28)); /* declet 5 */
+ dpd2char(sourml>>18); /* declet 6 */
+ dpd2char(sourml>>8); /* declet 7 */
+ dpd2char((sourml<<2) | (sourlo>>30)); /* declet 8 */
+ dpd2char(sourlo>>20); /* declet 9 */
+ dpd2char(sourlo>>10); /* declet 10 */
+ dpd2char(sourlo); /* declet 11 */
+ #endif
+
+ if (c==cstart) *c++='0'; /* all zeros, empty -- make "0" */
+
+ if (exp==0) { /* integer or NaN case -- easy */
+ *c='\0'; /* terminate */
+ return string;
+ }
+ /* non-0 exponent */
+
+ e=0; /* assume no E */
+ pre=(Int)(c-cstart)+exp; /* length+exp [c->LSD+1] */
+ /* [here, pre-exp is the digits count (==1 for zero)] */
+
+ if (exp>0 || pre<-5) { /* need exponential form */
+ e=pre-1; /* calculate E value */
+ pre=1; /* assume one digit before '.' */
+ if (e!=0) { /* engineering: may need to adjust */
+ Int adj; /* adjustment */
+ /* The C remainder operator is undefined for negative numbers, so */
+ /* a positive remainder calculation must be used here */
+ if (e<0) {
+ adj=(-e)%3;
+ if (adj!=0) adj=3-adj;
+ }
+ else { /* e>0 */
+ adj=e%3;
+ }
+ e=e-adj;
+ /* if dealing with zero still produce an exponent which is a */
+ /* multiple of three, as expected, but there will only be the */
+ /* one zero before the E, still. Otherwise note the padding. */
+ if (!DFISZERO(df)) pre+=adj;
+ else { /* is zero */
+ if (adj!=0) { /* 0.00Esnn needed */
+ e=e+3;
+ pre=-(2-adj);
+ }
+ } /* zero */
+ } /* engineering adjustment */
+ } /* exponential form */
+ /* printf("e=%ld pre=%ld exp=%ld\n", (LI)e, (LI)pre, (LI)exp); */
+
+ /* modify the coefficient, adding 0s, '.', and E+nn as needed */
+ if (pre>0) { /* ddd.ddd (plain), perhaps with E */
+ /* or dd00 padding for engineering */
+ char *dotat=cstart+pre;
+ if (dotat<c) { /* if embedded dot needed... */
+ /* move by fours; there must be space for junk at the end */
+ /* because there is still space for exponent */
+ s=dotat+ROUNDDOWN4(c-dotat); /* source */
+ t=s+1; /* target */
+ /* open the gap */
+ for (; s>=dotat; s-=4, t-=4) UINTAT(t)=UINTAT(s);
+ *dotat='.';
+ c++; /* length increased by one */
+ } /* need dot? */
+ else for (; c<dotat; c++) *c='0'; /* pad for engineering */
+ } /* pre>0 */
+ else {
+ /* -5<=pre<=0: here for plain 0.ddd or 0.000ddd forms (may have
+ E, but only for 0.00E+3 kind of case -- with plenty of spare
+ space in this case */
+ pre=-pre+2; /* gap width, including "0." */
+ t=cstart+ROUNDDOWN4(c-cstart)+pre; /* preferred first target point */
+ /* backoff if too far to the right */
+ if (t>string+DECSTRING-5) t=string+DECSTRING-5; /* adjust to fit */
+ /* now shift the entire coefficient to the right, being careful not */
+ /* to access to the left of string */
+ for (s=t-pre; s>=string; s-=4, t-=4) UINTAT(t)=UINTAT(s);
+ /* for Quads and Singles there may be a character or two left... */
+ s+=3; /* where next would come from */
+ for(; s>=cstart; s--, t--) *(t+3)=*(s);
+ /* now have fill 0. through 0.00000; use overlaps to avoid tests */
+ if (pre>=4) {
+ UINTAT(cstart+pre-4)=UINTAT("0000");
+ UINTAT(cstart)=UINTAT("0.00");
+ }
+ else { /* 2 or 3 */
+ *(cstart+pre-1)='0';
+ USHORTAT(cstart)=USHORTAT("0.");
+ }
+ c+=pre; /* to end */
+ }
+
+ /* finally add the E-part, if needed; it will never be 0, and has */
+ /* a maximum length of 3 or 4 digits (asserted above) */
+ if (e!=0) {
+ USHORTAT(c)=USHORTAT("E+"); /* starts with E, assume + */
+ c++;
+ if (e<0) {
+ *c='-'; /* oops, need '-' */
+ e=-e; /* uInt, please */
+ }
+ c++;
+ /* Three-character exponents are easy; 4-character a little trickier */
+ #if DECEMAXD<=3
+ u=&BIN2BCD8[e*4]; /* -> 3 digits + length byte */
+ /* copy fixed 4 characters [is safe], starting at non-zero */
+ /* and with character mask to convert BCD to char */
+ UINTAT(c)=UINTAT(u+3-*(u+3))|CHARMASK;
+ c+=*(u+3); /* bump pointer appropriately */
+ #elif DECEMAXD==4
+ if (e<1000) { /* 3 (or fewer) digits case */
+ u=&BIN2BCD8[e*4]; /* -> 3 digits + length byte */
+ UINTAT(c)=UINTAT(u+3-*(u+3))|CHARMASK; /* [as above] */
+ c+=*(u+3); /* bump pointer appropriately */
+ }
+ else { /* 4-digits */
+ Int thou=((e>>3)*1049)>>17; /* e/1000 */
+ Int rem=e-(1000*thou); /* e%1000 */
+ *c++=(char)('0'+(char)thou); /* the thousands digit */
+ u=&BIN2BCD8[rem*4]; /* -> 3 digits + length byte */
+ UINTAT(c)=UINTAT(u)|CHARMASK; /* copy fixed 3+1 characters [is safe] */
+ c+=3; /* bump pointer, always 3 digits */
+ }
+ #endif
+ }
+ *c='\0'; /* terminate */
+ /*printf("res %s\n", string); */
+ return string;
+ } /* decFloatToEngString */
+
+/* ------------------------------------------------------------------ */
+/* decFloatToPacked -- convert decFloat to Packed decimal + exponent */
+/* */
+/* df is the source decFloat */
+/* exp will be set to the unbiased exponent, q, or to a special */
+/* value in the form returned by decFloatGetExponent */
+/* packed is where DECPMAX nibbles will be written with the sign as */
+/* final nibble (0x0c for +, 0x0d for -); a NaN has a first nibble */
+/* of zero, and an infinity is all zeros. decDouble and decQuad */
+/* have a additional leading zero nibble, leading to result */
+/* lengths of 4, 9, and 18 bytes. */
+/* returns the sign of the coefficient (DECFLOAT_Sign if negative, */
+/* 0 otherwise) */
+/* */
+/* No error is possible, and no status will be set. */
+/* ------------------------------------------------------------------ */
+Int decFloatToPacked(const decFloat *df, Int *exp, uByte *packed) {
+ uByte bcdar[DECPMAX+2]; /* work buffer */
+ uByte *ip=bcdar, *op=packed; /* work pointers */
+ if (DFISINF(df)) {
+ memset(bcdar, 0, DECPMAX+2);
+ *exp=DECFLOAT_Inf;
+ }
+ else {
+ GETCOEFF(df, bcdar+1); /* use macro */
+ if (DFISNAN(df)) {
+ bcdar[1]=0; /* MSD needs clearing */
+ *exp=DFWORD(df, 0)&0x7e000000;
+ }
+ else { /* finite */
+ *exp=GETEXPUN(df);
+ }
+ }
+ /* now pack; coefficient currently at bcdar+1 */
+ #if SINGLE
+ ip++; /* ignore first byte */
+ #else
+ *ip=0; /* need leading zero */
+ #endif
+ /* set final byte to Packed BCD sign value */
+ bcdar[DECPMAX+1]=(DFISSIGNED(df) ? DECPMINUS : DECPPLUS);
+ /* pack an even number of bytes... */
+ for (; op<packed+((DECPMAX+2)/2); op++, ip+=2) {
+ *op=(uByte)((*ip<<4)+*(ip+1));
+ }
+ return (bcdar[DECPMAX+1]==DECPMINUS ? DECFLOAT_Sign : 0);
+ } /* decFloatToPacked */
+
+/* ------------------------------------------------------------------ */
+/* decFloatToString -- conversion to numeric string */
+/* */
+/* df is the decFloat format number to convert */
+/* string is the string where the result will be laid out */
+/* */
+/* string must be at least DECPMAX+9 characters (the worst case is */
+/* "-0.00000nnn...nnn\0", which is as long as the exponent form when */
+/* DECEMAXD<=4); this condition is asserted above */
+/* */
+/* No error is possible, and no status will be set */
+/* ------------------------------------------------------------------ */
+char * decFloatToString(const decFloat *df, char *string){
+ uInt msd; /* coefficient MSD */
+ Int exp; /* exponent top two bits or full */
+ uInt comb; /* combination field */
+ char *cstart; /* coefficient start */
+ char *c; /* output pointer in string */
+ char *s, *t; /* .. (source, target) */
+ Int pre, e; /* work */
+ const uByte *u; /* .. */
+
+ /* Source words; macro handles endianness */
+ uInt sourhi=DFWORD(df, 0); /* word with sign */
+ #if DECPMAX==16
+ uInt sourlo=DFWORD(df, 1);
+ #elif DECPMAX==34
+ uInt sourmh=DFWORD(df, 1);
+ uInt sourml=DFWORD(df, 2);
+ uInt sourlo=DFWORD(df, 3);
+ #endif
+
+ c=string; /* where result will go */
+ if (((Int)sourhi)<0) *c++='-'; /* handle sign */
+ comb=sourhi>>26; /* sign+combination field */
+ msd=DECCOMBMSD[comb]; /* decode the combination field */
+ exp=DECCOMBEXP[comb]; /* .. */
+
+ if (EXPISSPECIAL(exp)) { /* special */
+ if (exp==DECFLOAT_Inf) { /* infinity */
+ strcpy(c, "Infinity");
+ return string; /* easy */
+ }
+ if (sourhi&0x02000000) *c++='s'; /* sNaN */
+ strcpy(c, "NaN"); /* complete word */
+ c+=3; /* step past */
+ /* quick exit if the payload is zero */
+ #if DECPMAX==7
+ if ((sourhi&0x000fffff)==0) return string;
+ #elif DECPMAX==16
+ if (sourlo==0 && (sourhi&0x0003ffff)==0) return string;
+ #elif DECPMAX==34
+ if (sourlo==0 && sourml==0 && sourmh==0
+ && (sourhi&0x00003fff)==0) return string;
+ #endif
+ /* otherwise drop through to add integer; set correct exp etc. */
+ exp=0; msd=0; /* setup for following code */
+ }
+ else { /* complete exponent; top two bits are in place */
+ exp+=GETECON(df)-DECBIAS; /* .. + continuation and unbias */
+ }
+
+ /* convert the digits of the significand to characters */
+ cstart=c; /* save start of coefficient */
+ if (msd) *c++=(char)('0'+(char)msd); /* non-zero most significant digit */
+
+ /* Decode the declets. After extracting each declet, it is */
+ /* decoded to a 4-uByte sequence by table lookup; the four uBytes */
+ /* are the three encoded BCD8 digits followed by a 1-byte length */
+ /* (significant digits, except that 000 has length 0). This allows */
+ /* us to left-align the first declet with non-zero content, then */
+ /* the remaining ones are full 3-char length. Fixed-length copies */
+ /* are used because variable-length memcpy causes a subroutine call */
+ /* in at least two compilers. (The copies are length 4 for speed */
+ /* and are safe because the last item in the array is of length */
+ /* three and has the length byte following.) */
+ #define dpd2char(dpdin) u=&DPD2BCD8[((dpdin)&0x3ff)*4]; \
+ if (c!=cstart) {UINTAT(c)=UINTAT(u)|CHARMASK; c+=3;} \
+ else if (*(u+3)) { \
+ UINTAT(c)=UINTAT(u+3-*(u+3))|CHARMASK; c+=*(u+3);}
+
+ #if DECPMAX==7
+ dpd2char(sourhi>>10); /* declet 1 */
+ dpd2char(sourhi); /* declet 2 */
+
+ #elif DECPMAX==16
+ dpd2char(sourhi>>8); /* declet 1 */
+ dpd2char((sourhi<<2) | (sourlo>>30)); /* declet 2 */
+ dpd2char(sourlo>>20); /* declet 3 */
+ dpd2char(sourlo>>10); /* declet 4 */
+ dpd2char(sourlo); /* declet 5 */
+
+ #elif DECPMAX==34
+ dpd2char(sourhi>>4); /* declet 1 */
+ dpd2char((sourhi<<6) | (sourmh>>26)); /* declet 2 */
+ dpd2char(sourmh>>16); /* declet 3 */
+ dpd2char(sourmh>>6); /* declet 4 */
+ dpd2char((sourmh<<4) | (sourml>>28)); /* declet 5 */
+ dpd2char(sourml>>18); /* declet 6 */
+ dpd2char(sourml>>8); /* declet 7 */
+ dpd2char((sourml<<2) | (sourlo>>30)); /* declet 8 */
+ dpd2char(sourlo>>20); /* declet 9 */
+ dpd2char(sourlo>>10); /* declet 10 */
+ dpd2char(sourlo); /* declet 11 */
+ #endif
+
+ if (c==cstart) *c++='0'; /* all zeros, empty -- make "0" */
+
+ /*[This fast path is valid but adds 3-5 cycles to worst case length] */
+ /*if (exp==0) { // integer or NaN case -- easy */
+ /* *c='\0'; // terminate */
+ /* return string; */
+ /* } */
+
+ e=0; /* assume no E */
+ pre=(Int)(c-cstart)+exp; /* length+exp [c->LSD+1] */
+ /* [here, pre-exp is the digits count (==1 for zero)] */
+
+ if (exp>0 || pre<-5) { /* need exponential form */
+ e=pre-1; /* calculate E value */
+ pre=1; /* assume one digit before '.' */
+ } /* exponential form */
+
+ /* modify the coefficient, adding 0s, '.', and E+nn as needed */
+ if (pre>0) { /* ddd.ddd (plain), perhaps with E */
+ char *dotat=cstart+pre;
+ if (dotat<c) { /* if embedded dot needed... */
+ /* move by fours; there must be space for junk at the end */
+ /* because there is still space for exponent */
+ s=dotat+ROUNDDOWN4(c-dotat); /* source */
+ t=s+1; /* target */
+ /* open the gap */
+ for (; s>=dotat; s-=4, t-=4) UINTAT(t)=UINTAT(s);
+ *dotat='.';
+ c++; /* length increased by one */
+ } /* need dot? */
+
+ /* finally add the E-part, if needed; it will never be 0, and has */
+ /* a maximum length of 3 or 4 digits (asserted above) */
+ if (e!=0) {
+ USHORTAT(c)=USHORTAT("E+"); /* starts with E, assume + */
+ c++;
+ if (e<0) {
+ *c='-'; /* oops, need '-' */
+ e=-e; /* uInt, please */
+ }
+ c++;
+ /* Three-character exponents are easy; 4-character a little trickier */
+ #if DECEMAXD<=3
+ u=&BIN2BCD8[e*4]; /* -> 3 digits + length byte */
+ /* copy fixed 4 characters [is safe], starting at non-zero */
+ /* and with character mask to convert BCD to char */
+ UINTAT(c)=UINTAT(u+3-*(u+3))|CHARMASK;
+ c+=*(u+3); /* bump pointer appropriately */
+ #elif DECEMAXD==4
+ if (e<1000) { /* 3 (or fewer) digits case */
+ u=&BIN2BCD8[e*4]; /* -> 3 digits + length byte */
+ UINTAT(c)=UINTAT(u+3-*(u+3))|CHARMASK; /* [as above] */
+ c+=*(u+3); /* bump pointer appropriately */
+ }
+ else { /* 4-digits */
+ Int thou=((e>>3)*1049)>>17; /* e/1000 */
+ Int rem=e-(1000*thou); /* e%1000 */
+ *c++=(char)('0'+(char)thou); /* the thousands digit */
+ u=&BIN2BCD8[rem*4]; /* -> 3 digits + length byte */
+ UINTAT(c)=UINTAT(u)|CHARMASK; /* copy fixed 3+1 characters [is safe] */
+ c+=3; /* bump pointer, always 3 digits */
+ }
+ #endif
+ }
+ *c='\0'; /* add terminator */
+ /*printf("res %s\n", string); */
+ return string;
+ } /* pre>0 */
+
+ /* -5<=pre<=0: here for plain 0.ddd or 0.000ddd forms (can never have E) */
+ /* Surprisingly, this is close to being the worst-case path, so the */
+ /* shift is done by fours; this is a little tricky because the */
+ /* rightmost character to be written must not be beyond where the */
+ /* rightmost terminator could be -- so backoff to not touch */
+ /* terminator position if need be (this can make exact alignments */
+ /* for full Doubles, but in some cases needs care not to access too */
+ /* far to the left) */
+
+ pre=-pre+2; /* gap width, including "0." */
+ t=cstart+ROUNDDOWN4(c-cstart)+pre; /* preferred first target point */
+ /* backoff if too far to the right */
+ if (t>string+DECSTRING-5) t=string+DECSTRING-5; /* adjust to fit */
+ /* now shift the entire coefficient to the right, being careful not */
+ /* to access to the left of string */
+ for (s=t-pre; s>=string; s-=4, t-=4) UINTAT(t)=UINTAT(s);
+ /* for Quads and Singles there may be a character or two left... */
+ s+=3; /* where next would come from */
+ for(; s>=cstart; s--, t--) *(t+3)=*(s);
+ /* now have fill 0. through 0.00000; use overlaps to avoid tests */
+ if (pre>=4) {
+ UINTAT(cstart+pre-4)=UINTAT("0000");
+ UINTAT(cstart)=UINTAT("0.00");
+ }
+ else { /* 2 or 3 */
+ *(cstart+pre-1)='0';
+ USHORTAT(cstart)=USHORTAT("0.");
+ }
+ *(c+pre)='\0'; /* terminate */
+ return string;
+ } /* decFloatToString */
+
+/* ------------------------------------------------------------------ */
+/* decFloatToWider -- conversion to next-wider format */
+/* */
+/* source is the decFloat format number which gets the result of */
+/* the conversion */
+/* wider is the decFloatWider format number which will be narrowed */
+/* returns wider */
+/* */
+/* Widening is always exact; no status is set (sNaNs are copied and */
+/* do not signal). The result will be canonical if the source is, */
+/* and may or may not be if the source is not. */
+/* ------------------------------------------------------------------ */
+/* widening is not possible for decQuad format numbers; simply omit */
+#if !QUAD
+decFloatWider * decFloatToWider(const decFloat *source, decFloatWider *wider) {
+ uInt msd;
+
+ /* Construct and copy the sign word */
+ if (DFISSPECIAL(source)) {
+ /* copy sign, combination, and first bit of exponent (sNaN selector) */
+ DFWWORD(wider, 0)=DFWORD(source, 0)&0xfe000000;
+ msd=0;
+ }
+ else { /* is finite number */
+ uInt exp=GETEXPUN(source)+DECWBIAS; /* get unbiased exponent and rebias */
+ uInt code=(exp>>DECWECONL)<<29; /* set two bits of exp [msd=0] */
+ code|=(exp<<(32-6-DECWECONL)) & 0x03ffffff; /* add exponent continuation */
+ code|=DFWORD(source, 0)&0x80000000; /* add sign */
+ DFWWORD(wider, 0)=code; /* .. and place top word in wider */
+ msd=GETMSD(source); /* get source coefficient MSD [0-9] */
+ }
+ /* Copy the coefficient and clear any 'unused' words to left */
+ #if SINGLE
+ DFWWORD(wider, 1)=(DFWORD(source, 0)&0x000fffff)|(msd<<20);
+ #elif DOUBLE
+ DFWWORD(wider, 2)=(DFWORD(source, 0)&0x0003ffff)|(msd<<18);
+ DFWWORD(wider, 3)=DFWORD(source, 1);
+ DFWWORD(wider, 1)=0;
+ #endif
+ return wider;
+ } /* decFloatToWider */
+#endif
+
+/* ------------------------------------------------------------------ */
+/* decFloatVersion -- return package version string */
+/* */
+/* returns a constant string describing this package */
+/* ------------------------------------------------------------------ */
+const char *decFloatVersion(void) {
+ return DECVERSION;
+ } /* decFloatVersion */
+
+/* ------------------------------------------------------------------ */
+/* decFloatZero -- set to canonical (integer) zero */
+/* */
+/* df is the decFloat format number to integer +0 (q=0, c=+0) */
+/* returns df */
+/* */
+/* No error is possible, and no status can be set. */
+/* ------------------------------------------------------------------ */
+decFloat * decFloatZero(decFloat *df){
+ DFWORD(df, 0)=ZEROWORD; /* set appropriate top word */
+ #if DOUBLE || QUAD
+ DFWORD(df, 1)=0;
+ #if QUAD
+ DFWORD(df, 2)=0;
+ DFWORD(df, 3)=0;
+ #endif
+ #endif
+ /* decFloatShow(df, "zero"); */
+ return df;
+ } /* decFloatZero */
+
+/* ------------------------------------------------------------------ */
+/* Private generic function (not format-specific) for development use */
+/* ------------------------------------------------------------------ */
+/* This is included once only, for all to use */
+#if QUAD && (DECCHECK || DECTRACE)
+ /* ---------------------------------------------------------------- */
+ /* decShowNum -- display bcd8 number in debug form */
+ /* */
+ /* num is the bcdnum to display */
+ /* tag is a string to label the display */
+ /* ---------------------------------------------------------------- */
+ void decShowNum(const bcdnum *num, const char *tag) {
+ const char *csign="+"; /* sign character */
+ uByte *ub; /* work */
+ if (num->sign==DECFLOAT_Sign) csign="-";
+
+ printf(">%s> ", tag);
+ if (num->exponent==DECFLOAT_Inf) printf("%sInfinity", csign);
+ else if (num->exponent==DECFLOAT_qNaN) printf("%sqNaN", csign);
+ else if (num->exponent==DECFLOAT_sNaN) printf("%ssNaN", csign);
+ else { /* finite */
+ char qbuf[10]; /* for right-aligned q */
+ char *c; /* work */
+ const uByte *u; /* .. */
+ Int e=num->exponent; /* .. exponent */
+ strcpy(qbuf, "q=");
+ c=&qbuf[2]; /* where exponent will go */
+ /* lay out the exponent */
+ if (e<0) {
+ *c++='-'; /* add '-' */
+ e=-e; /* uInt, please */
+ }
+ #if DECEMAXD>4
+ #error Exponent form is too long for ShowNum to lay out
+ #endif
+ if (e==0) *c++='0'; /* 0-length case */
+ else if (e<1000) { /* 3 (or fewer) digits case */
+ u=&BIN2BCD8[e*4]; /* -> 3 digits + length byte */
+ UINTAT(c)=UINTAT(u+3-*(u+3))|CHARMASK; /* [as above] */
+ c+=*(u+3); /* bump pointer appropriately */
+ }
+ else { /* 4-digits */
+ Int thou=((e>>3)*1049)>>17; /* e/1000 */
+ Int rem=e-(1000*thou); /* e%1000 */
+ *c++=(char)('0'+(char)thou); /* the thousands digit */
+ u=&BIN2BCD8[rem*4]; /* -> 3 digits + length byte */
+ UINTAT(c)=UINTAT(u)|CHARMASK; /* copy fixed 3+1 characters [is safe] */
+ c+=3; /* bump pointer, always 3 digits */
+ }
+ *c='\0'; /* add terminator */
+ printf("%7s c=%s", qbuf, csign);
+ }
+
+ if (!EXPISSPECIAL(num->exponent) || num->msd!=num->lsd || *num->lsd!=0) {
+ for (ub=num->msd; ub<=num->lsd; ub++) { /* coefficient... */
+ printf("%1x", *ub);
+ if ((num->lsd-ub)%3==0 && ub!=num->lsd) printf(" "); /* 4-space */
+ }
+ }
+ printf("\n");
+ } /* decShowNum */
+#endif
diff --git a/libdecnumber/decContext.c b/libdecnumber/decContext.c
new file mode 100644
index 0000000..0774193
--- /dev/null
+++ b/libdecnumber/decContext.c
@@ -0,0 +1,432 @@
+/* Decimal context module for the decNumber C Library.
+ Copyright (C) 2005, 2007 Free Software Foundation, Inc.
+ Contributed by IBM Corporation. Author Mike Cowlishaw.
+
+ This file is part of GCC.
+
+ GCC is free software; you can redistribute it and/or modify it under
+ the terms of the GNU General Public License as published by the Free
+ Software Foundation; either version 2, or (at your option) any later
+ version.
+
+ In addition to the permissions in the GNU General Public License,
+ the Free Software Foundation gives you unlimited permission to link
+ the compiled version of this file into combinations with other
+ programs, and to distribute those combinations without any
+ restriction coming from the use of this file. (The General Public
+ License restrictions do apply in other respects; for example, they
+ cover modification of the file, and distribution when not linked
+ into a combine executable.)
+
+ GCC is distributed in the hope that it will be useful, but WITHOUT ANY
+ WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
+ for more details.
+
+ You should have received a copy of the GNU General Public License
+ along with GCC; see the file COPYING. If not, write to the Free
+ Software Foundation, 51 Franklin Street, Fifth Floor, Boston, MA
+ 02110-1301, USA. */
+
+/* ------------------------------------------------------------------ */
+/* Decimal Context module */
+/* ------------------------------------------------------------------ */
+/* This module comprises the routines for handling arithmetic */
+/* context structures. */
+/* ------------------------------------------------------------------ */
+
+#include <string.h> /* for strcmp */
+#include <stdio.h> /* for printf if DECCHECK */
+#include "config.h" /* for GCC definitions */
+#include "decContext.h" /* context and base types */
+#include "decNumberLocal.h" /* decNumber local types, etc. */
+
+#if DECCHECK
+/* compile-time endian tester [assumes sizeof(Int)>1] */
+static const Int mfcone=1; /* constant 1 */
+static const Flag *mfctop=(Flag *)&mfcone; /* -> top byte */
+#define LITEND *mfctop /* named flag; 1=little-endian */
+#endif
+
+/* ------------------------------------------------------------------ */
+/* round-for-reround digits */
+/* ------------------------------------------------------------------ */
+const uByte DECSTICKYTAB[10]={1,1,2,3,4,6,6,7,8,9}; /* used if sticky */
+
+/* ------------------------------------------------------------------ */
+/* Powers of ten (powers[n]==10**n, 0<=n<=9) */
+/* ------------------------------------------------------------------ */
+const uInt DECPOWERS[10]={1, 10, 100, 1000, 10000, 100000, 1000000,
+ 10000000, 100000000, 1000000000};
+
+/* ------------------------------------------------------------------ */
+/* decContextClearStatus -- clear bits in current status */
+/* */
+/* context is the context structure to be queried */
+/* mask indicates the bits to be cleared (the status bit that */
+/* corresponds to each 1 bit in the mask is cleared) */
+/* returns context */
+/* */
+/* No error is possible. */
+/* ------------------------------------------------------------------ */
+decContext *decContextClearStatus(decContext *context, uInt mask) {
+ context->status&=~mask;
+ return context;
+ } /* decContextClearStatus */
+
+/* ------------------------------------------------------------------ */
+/* decContextDefault -- initialize a context structure */
+/* */
+/* context is the structure to be initialized */
+/* kind selects the required set of default values, one of: */
+/* DEC_INIT_BASE -- select ANSI X3-274 defaults */
+/* DEC_INIT_DECIMAL32 -- select IEEE 754r defaults, 32-bit */
+/* DEC_INIT_DECIMAL64 -- select IEEE 754r defaults, 64-bit */
+/* DEC_INIT_DECIMAL128 -- select IEEE 754r defaults, 128-bit */
+/* For any other value a valid context is returned, but with */
+/* Invalid_operation set in the status field. */
+/* returns a context structure with the appropriate initial values. */
+/* ------------------------------------------------------------------ */
+decContext * decContextDefault(decContext *context, Int kind) {
+ /* set defaults... */
+ context->digits=9; /* 9 digits */
+ context->emax=DEC_MAX_EMAX; /* 9-digit exponents */
+ context->emin=DEC_MIN_EMIN; /* .. balanced */
+ context->round=DEC_ROUND_HALF_UP; /* 0.5 rises */
+ context->traps=DEC_Errors; /* all but informational */
+ context->status=0; /* cleared */
+ context->clamp=0; /* no clamping */
+ #if DECSUBSET
+ context->extended=0; /* cleared */
+ #endif
+ switch (kind) {
+ case DEC_INIT_BASE:
+ /* [use defaults] */
+ break;
+ case DEC_INIT_DECIMAL32:
+ context->digits=7; /* digits */
+ context->emax=96; /* Emax */
+ context->emin=-95; /* Emin */
+ context->round=DEC_ROUND_HALF_EVEN; /* 0.5 to nearest even */
+ context->traps=0; /* no traps set */
+ context->clamp=1; /* clamp exponents */
+ #if DECSUBSET
+ context->extended=1; /* set */
+ #endif
+ break;
+ case DEC_INIT_DECIMAL64:
+ context->digits=16; /* digits */
+ context->emax=384; /* Emax */
+ context->emin=-383; /* Emin */
+ context->round=DEC_ROUND_HALF_EVEN; /* 0.5 to nearest even */
+ context->traps=0; /* no traps set */
+ context->clamp=1; /* clamp exponents */
+ #if DECSUBSET
+ context->extended=1; /* set */
+ #endif
+ break;
+ case DEC_INIT_DECIMAL128:
+ context->digits=34; /* digits */
+ context->emax=6144; /* Emax */
+ context->emin=-6143; /* Emin */
+ context->round=DEC_ROUND_HALF_EVEN; /* 0.5 to nearest even */
+ context->traps=0; /* no traps set */
+ context->clamp=1; /* clamp exponents */
+ #if DECSUBSET
+ context->extended=1; /* set */
+ #endif
+ break;
+
+ default: /* invalid Kind */
+ /* use defaults, and .. */
+ decContextSetStatus(context, DEC_Invalid_operation); /* trap */
+ }
+
+ #if DECCHECK
+ if (LITEND!=DECLITEND) {
+ const char *adj;
+ if (LITEND) adj="little";
+ else adj="big";
+ printf("Warning: DECLITEND is set to %d, but this computer appears to be %s-endian\n",
+ DECLITEND, adj);
+ }
+ #endif
+ return context;} /* decContextDefault */
+
+/* ------------------------------------------------------------------ */
+/* decContextGetRounding -- return current rounding mode */
+/* */
+/* context is the context structure to be queried */
+/* returns the rounding mode */
+/* */
+/* No error is possible. */
+/* ------------------------------------------------------------------ */
+enum rounding decContextGetRounding(decContext *context) {
+ return context->round;
+ } /* decContextGetRounding */
+
+/* ------------------------------------------------------------------ */
+/* decContextGetStatus -- return current status */
+/* */
+/* context is the context structure to be queried */
+/* returns status */
+/* */
+/* No error is possible. */
+/* ------------------------------------------------------------------ */
+uInt decContextGetStatus(decContext *context) {
+ return context->status;
+ } /* decContextGetStatus */
+
+/* ------------------------------------------------------------------ */
+/* decContextRestoreStatus -- restore bits in current status */
+/* */
+/* context is the context structure to be updated */
+/* newstatus is the source for the bits to be restored */
+/* mask indicates the bits to be restored (the status bit that */
+/* corresponds to each 1 bit in the mask is set to the value of */
+/* the correspnding bit in newstatus) */
+/* returns context */
+/* */
+/* No error is possible. */
+/* ------------------------------------------------------------------ */
+decContext *decContextRestoreStatus(decContext *context,
+ uInt newstatus, uInt mask) {
+ context->status&=~mask; /* clear the selected bits */
+ context->status|=(mask&newstatus); /* or in the new bits */
+ return context;
+ } /* decContextRestoreStatus */
+
+/* ------------------------------------------------------------------ */
+/* decContextSaveStatus -- save bits in current status */
+/* */
+/* context is the context structure to be queried */
+/* mask indicates the bits to be saved (the status bits that */
+/* correspond to each 1 bit in the mask are saved) */
+/* returns the AND of the mask and the current status */
+/* */
+/* No error is possible. */
+/* ------------------------------------------------------------------ */
+uInt decContextSaveStatus(decContext *context, uInt mask) {
+ return context->status&mask;
+ } /* decContextSaveStatus */
+
+/* ------------------------------------------------------------------ */
+/* decContextSetRounding -- set current rounding mode */
+/* */
+/* context is the context structure to be updated */
+/* newround is the value which will replace the current mode */
+/* returns context */
+/* */
+/* No error is possible. */
+/* ------------------------------------------------------------------ */
+decContext *decContextSetRounding(decContext *context,
+ enum rounding newround) {
+ context->round=newround;
+ return context;
+ } /* decContextSetRounding */
+
+/* ------------------------------------------------------------------ */
+/* decContextSetStatus -- set status and raise trap if appropriate */
+/* */
+/* context is the context structure to be updated */
+/* status is the DEC_ exception code */
+/* returns the context structure */
+/* */
+/* Control may never return from this routine, if there is a signal */
+/* handler and it takes a long jump. */
+/* ------------------------------------------------------------------ */
+decContext * decContextSetStatus(decContext *context, uInt status) {
+ context->status|=status;
+ if (status & context->traps) raise(SIGFPE);
+ return context;} /* decContextSetStatus */
+
+/* ------------------------------------------------------------------ */
+/* decContextSetStatusFromString -- set status from a string + trap */
+/* */
+/* context is the context structure to be updated */
+/* string is a string exactly equal to one that might be returned */
+/* by decContextStatusToString */
+/* */
+/* The status bit corresponding to the string is set, and a trap */
+/* is raised if appropriate. */
+/* */
+/* returns the context structure, unless the string is equal to */
+/* DEC_Condition_MU or is not recognized. In these cases NULL is */
+/* returned. */
+/* ------------------------------------------------------------------ */
+decContext * decContextSetStatusFromString(decContext *context,
+ const char *string) {
+ if (strcmp(string, DEC_Condition_CS)==0)
+ return decContextSetStatus(context, DEC_Conversion_syntax);
+ if (strcmp(string, DEC_Condition_DZ)==0)
+ return decContextSetStatus(context, DEC_Division_by_zero);
+ if (strcmp(string, DEC_Condition_DI)==0)
+ return decContextSetStatus(context, DEC_Division_impossible);
+ if (strcmp(string, DEC_Condition_DU)==0)
+ return decContextSetStatus(context, DEC_Division_undefined);
+ if (strcmp(string, DEC_Condition_IE)==0)
+ return decContextSetStatus(context, DEC_Inexact);
+ if (strcmp(string, DEC_Condition_IS)==0)
+ return decContextSetStatus(context, DEC_Insufficient_storage);
+ if (strcmp(string, DEC_Condition_IC)==0)
+ return decContextSetStatus(context, DEC_Invalid_context);
+ if (strcmp(string, DEC_Condition_IO)==0)
+ return decContextSetStatus(context, DEC_Invalid_operation);
+ #if DECSUBSET
+ if (strcmp(string, DEC_Condition_LD)==0)
+ return decContextSetStatus(context, DEC_Lost_digits);
+ #endif
+ if (strcmp(string, DEC_Condition_OV)==0)
+ return decContextSetStatus(context, DEC_Overflow);
+ if (strcmp(string, DEC_Condition_PA)==0)
+ return decContextSetStatus(context, DEC_Clamped);
+ if (strcmp(string, DEC_Condition_RO)==0)
+ return decContextSetStatus(context, DEC_Rounded);
+ if (strcmp(string, DEC_Condition_SU)==0)
+ return decContextSetStatus(context, DEC_Subnormal);
+ if (strcmp(string, DEC_Condition_UN)==0)
+ return decContextSetStatus(context, DEC_Underflow);
+ if (strcmp(string, DEC_Condition_ZE)==0)
+ return context;
+ return NULL; /* Multiple status, or unknown */
+ } /* decContextSetStatusFromString */
+
+/* ------------------------------------------------------------------ */
+/* decContextSetStatusFromStringQuiet -- set status from a string */
+/* */
+/* context is the context structure to be updated */
+/* string is a string exactly equal to one that might be returned */
+/* by decContextStatusToString */
+/* */
+/* The status bit corresponding to the string is set; no trap is */
+/* raised. */
+/* */
+/* returns the context structure, unless the string is equal to */
+/* DEC_Condition_MU or is not recognized. In these cases NULL is */
+/* returned. */
+/* ------------------------------------------------------------------ */
+decContext * decContextSetStatusFromStringQuiet(decContext *context,
+ const char *string) {
+ if (strcmp(string, DEC_Condition_CS)==0)
+ return decContextSetStatusQuiet(context, DEC_Conversion_syntax);
+ if (strcmp(string, DEC_Condition_DZ)==0)
+ return decContextSetStatusQuiet(context, DEC_Division_by_zero);
+ if (strcmp(string, DEC_Condition_DI)==0)
+ return decContextSetStatusQuiet(context, DEC_Division_impossible);
+ if (strcmp(string, DEC_Condition_DU)==0)
+ return decContextSetStatusQuiet(context, DEC_Division_undefined);
+ if (strcmp(string, DEC_Condition_IE)==0)
+ return decContextSetStatusQuiet(context, DEC_Inexact);
+ if (strcmp(string, DEC_Condition_IS)==0)
+ return decContextSetStatusQuiet(context, DEC_Insufficient_storage);
+ if (strcmp(string, DEC_Condition_IC)==0)
+ return decContextSetStatusQuiet(context, DEC_Invalid_context);
+ if (strcmp(string, DEC_Condition_IO)==0)
+ return decContextSetStatusQuiet(context, DEC_Invalid_operation);
+ #if DECSUBSET
+ if (strcmp(string, DEC_Condition_LD)==0)
+ return decContextSetStatusQuiet(context, DEC_Lost_digits);
+ #endif
+ if (strcmp(string, DEC_Condition_OV)==0)
+ return decContextSetStatusQuiet(context, DEC_Overflow);
+ if (strcmp(string, DEC_Condition_PA)==0)
+ return decContextSetStatusQuiet(context, DEC_Clamped);
+ if (strcmp(string, DEC_Condition_RO)==0)
+ return decContextSetStatusQuiet(context, DEC_Rounded);
+ if (strcmp(string, DEC_Condition_SU)==0)
+ return decContextSetStatusQuiet(context, DEC_Subnormal);
+ if (strcmp(string, DEC_Condition_UN)==0)
+ return decContextSetStatusQuiet(context, DEC_Underflow);
+ if (strcmp(string, DEC_Condition_ZE)==0)
+ return context;
+ return NULL; /* Multiple status, or unknown */
+ } /* decContextSetStatusFromStringQuiet */
+
+/* ------------------------------------------------------------------ */
+/* decContextSetStatusQuiet -- set status without trap */
+/* */
+/* context is the context structure to be updated */
+/* status is the DEC_ exception code */
+/* returns the context structure */
+/* */
+/* No error is possible. */
+/* ------------------------------------------------------------------ */
+decContext * decContextSetStatusQuiet(decContext *context, uInt status) {
+ context->status|=status;
+ return context;} /* decContextSetStatusQuiet */
+
+/* ------------------------------------------------------------------ */
+/* decContextStatusToString -- convert status flags to a string */
+/* */
+/* context is a context with valid status field */
+/* */
+/* returns a constant string describing the condition. If multiple */
+/* (or no) flags are set, a generic constant message is returned. */
+/* ------------------------------------------------------------------ */
+const char *decContextStatusToString(const decContext *context) {
+ Int status=context->status;
+
+ /* test the five IEEE first, as some of the others are ambiguous when */
+ /* DECEXTFLAG=0 */
+ if (status==DEC_Invalid_operation ) return DEC_Condition_IO;
+ if (status==DEC_Division_by_zero ) return DEC_Condition_DZ;
+ if (status==DEC_Overflow ) return DEC_Condition_OV;
+ if (status==DEC_Underflow ) return DEC_Condition_UN;
+ if (status==DEC_Inexact ) return DEC_Condition_IE;
+
+ if (status==DEC_Division_impossible ) return DEC_Condition_DI;
+ if (status==DEC_Division_undefined ) return DEC_Condition_DU;
+ if (status==DEC_Rounded ) return DEC_Condition_RO;
+ if (status==DEC_Clamped ) return DEC_Condition_PA;
+ if (status==DEC_Subnormal ) return DEC_Condition_SU;
+ if (status==DEC_Conversion_syntax ) return DEC_Condition_CS;
+ if (status==DEC_Insufficient_storage ) return DEC_Condition_IS;
+ if (status==DEC_Invalid_context ) return DEC_Condition_IC;
+ #if DECSUBSET
+ if (status==DEC_Lost_digits ) return DEC_Condition_LD;
+ #endif
+ if (status==0 ) return DEC_Condition_ZE;
+ return DEC_Condition_MU; /* Multiple errors */
+ } /* decContextStatusToString */
+
+/* ------------------------------------------------------------------ */
+/* decContextTestSavedStatus -- test bits in saved status */
+/* */
+/* oldstatus is the status word to be tested */
+/* mask indicates the bits to be tested (the oldstatus bits that */
+/* correspond to each 1 bit in the mask are tested) */
+/* returns 1 if any of the tested bits are 1, or 0 otherwise */
+/* */
+/* No error is possible. */
+/* ------------------------------------------------------------------ */
+uInt decContextTestSavedStatus(uInt oldstatus, uInt mask) {
+ return (oldstatus&mask)!=0;
+ } /* decContextTestSavedStatus */
+
+/* ------------------------------------------------------------------ */
+/* decContextTestStatus -- test bits in current status */
+/* */
+/* context is the context structure to be updated */
+/* mask indicates the bits to be tested (the status bits that */
+/* correspond to each 1 bit in the mask are tested) */
+/* returns 1 if any of the tested bits are 1, or 0 otherwise */
+/* */
+/* No error is possible. */
+/* ------------------------------------------------------------------ */
+uInt decContextTestStatus(decContext *context, uInt mask) {
+ return (context->status&mask)!=0;
+ } /* decContextTestStatus */
+
+/* ------------------------------------------------------------------ */
+/* decContextZeroStatus -- clear all status bits */
+/* */
+/* context is the context structure to be updated */
+/* returns context */
+/* */
+/* No error is possible. */
+/* ------------------------------------------------------------------ */
+decContext *decContextZeroStatus(decContext *context) {
+ context->status=0;
+ return context;
+ } /* decContextZeroStatus */
+
diff --git a/libdecnumber/decContext.h b/libdecnumber/decContext.h
new file mode 100644
index 0000000..f80d03c
--- /dev/null
+++ b/libdecnumber/decContext.h
@@ -0,0 +1,258 @@
+/* Decimal context header module for the decNumber C Library.
+ Copyright (C) 2005, 2007 Free Software Foundation, Inc.
+ Contributed by IBM Corporation. Author Mike Cowlishaw.
+
+ This file is part of GCC.
+
+ GCC is free software; you can redistribute it and/or modify it under
+ the terms of the GNU General Public License as published by the Free
+ Software Foundation; either version 2, or (at your option) any later
+ version.
+
+ In addition to the permissions in the GNU General Public License,
+ the Free Software Foundation gives you unlimited permission to link
+ the compiled version of this file into combinations with other
+ programs, and to distribute those combinations without any
+ restriction coming from the use of this file. (The General Public
+ License restrictions do apply in other respects; for example, they
+ cover modification of the file, and distribution when not linked
+ into a combine executable.)
+
+ GCC is distributed in the hope that it will be useful, but WITHOUT ANY
+ WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
+ for more details.
+
+ You should have received a copy of the GNU General Public License
+ along with GCC; see the file COPYING. If not, write to the Free
+ Software Foundation, 51 Franklin Street, Fifth Floor, Boston, MA
+ 02110-1301, USA. */
+
+/* ------------------------------------------------------------------ */
+/* Decimal Context module header */
+/* ------------------------------------------------------------------ */
+/* */
+/* Context variables must always have valid values: */
+/* */
+/* status -- [any bits may be cleared, but not set, by user] */
+/* round -- must be one of the enumerated rounding modes */
+/* */
+/* The following variables are implied for fixed size formats (i.e., */
+/* they are ignored) but should still be set correctly in case used */
+/* with decNumber functions: */
+/* */
+/* clamp -- must be either 0 or 1 */
+/* digits -- must be in the range 1 through 999999999 */
+/* emax -- must be in the range 0 through 999999999 */
+/* emin -- must be in the range 0 through -999999999 */
+/* extended -- must be either 0 or 1 [present only if DECSUBSET] */
+/* traps -- only defined bits may be set */
+/* */
+/* ------------------------------------------------------------------ */
+
+#if !defined(DECCONTEXT)
+ #define DECCONTEXT
+ #define DECCNAME "decContext" /* Short name */
+ #define DECCFULLNAME "Decimal Context Descriptor" /* Verbose name */
+ #define DECCAUTHOR "Mike Cowlishaw" /* Who to blame */
+
+ #include "gstdint.h" /* C99 standard integers */
+ #include <stdio.h> /* for printf, etc. */
+ #include <signal.h> /* for traps */
+
+ /* Extended flags setting -- set this to 0 to use only IEEE flags */
+ #define DECEXTFLAG 1 /* 1=enable extended flags */
+
+ /* Conditional code flag -- set this to 0 for best performance */
+ #define DECSUBSET 0 /* 1=enable subset arithmetic */
+
+ /* Context for operations, with associated constants */
+ enum rounding {
+ DEC_ROUND_CEILING, /* round towards +infinity */
+ DEC_ROUND_UP, /* round away from 0 */
+ DEC_ROUND_HALF_UP, /* 0.5 rounds up */
+ DEC_ROUND_HALF_EVEN, /* 0.5 rounds to nearest even */
+ DEC_ROUND_HALF_DOWN, /* 0.5 rounds down */
+ DEC_ROUND_DOWN, /* round towards 0 (truncate) */
+ DEC_ROUND_FLOOR, /* round towards -infinity */
+ DEC_ROUND_05UP, /* round for reround */
+ DEC_ROUND_MAX /* enum must be less than this */
+ };
+ #define DEC_ROUND_DEFAULT DEC_ROUND_HALF_EVEN;
+
+ typedef struct {
+ int32_t digits; /* working precision */
+ int32_t emax; /* maximum positive exponent */
+ int32_t emin; /* minimum negative exponent */
+ enum rounding round; /* rounding mode */
+ uint32_t traps; /* trap-enabler flags */
+ uint32_t status; /* status flags */
+ uint8_t clamp; /* flag: apply IEEE exponent clamp */
+ #if DECSUBSET
+ uint8_t extended; /* flag: special-values allowed */
+ #endif
+ } decContext;
+
+ /* Maxima and Minima for context settings */
+ #define DEC_MAX_DIGITS 999999999
+ #define DEC_MIN_DIGITS 1
+ #define DEC_MAX_EMAX 999999999
+ #define DEC_MIN_EMAX 0
+ #define DEC_MAX_EMIN 0
+ #define DEC_MIN_EMIN -999999999
+ #define DEC_MAX_MATH 999999 /* max emax, etc., for math funcs. */
+
+ /* Classifications for decimal numbers, aligned with 754r (note */
+ /* that 'normal' and 'subnormal' are meaningful only with a */
+ /* decContext or a fixed size format). */
+ enum decClass {
+ DEC_CLASS_SNAN,
+ DEC_CLASS_QNAN,
+ DEC_CLASS_NEG_INF,
+ DEC_CLASS_NEG_NORMAL,
+ DEC_CLASS_NEG_SUBNORMAL,
+ DEC_CLASS_NEG_ZERO,
+ DEC_CLASS_POS_ZERO,
+ DEC_CLASS_POS_SUBNORMAL,
+ DEC_CLASS_POS_NORMAL,
+ DEC_CLASS_POS_INF
+ };
+ /* Strings for the decClasses */
+ #define DEC_ClassString_SN "sNaN"
+ #define DEC_ClassString_QN "NaN"
+ #define DEC_ClassString_NI "-Infinity"
+ #define DEC_ClassString_NN "-Normal"
+ #define DEC_ClassString_NS "-Subnormal"
+ #define DEC_ClassString_NZ "-Zero"
+ #define DEC_ClassString_PZ "+Zero"
+ #define DEC_ClassString_PS "+Subnormal"
+ #define DEC_ClassString_PN "+Normal"
+ #define DEC_ClassString_PI "+Infinity"
+ #define DEC_ClassString_UN "Invalid"
+
+ /* Trap-enabler and Status flags (exceptional conditions), and */
+ /* their names. The top byte is reserved for internal use */
+ #if DECEXTFLAG
+ /* Extended flags */
+ #define DEC_Conversion_syntax 0x00000001
+ #define DEC_Division_by_zero 0x00000002
+ #define DEC_Division_impossible 0x00000004
+ #define DEC_Division_undefined 0x00000008
+ #define DEC_Insufficient_storage 0x00000010 /* [when malloc fails] */
+ #define DEC_Inexact 0x00000020
+ #define DEC_Invalid_context 0x00000040
+ #define DEC_Invalid_operation 0x00000080
+ #if DECSUBSET
+ #define DEC_Lost_digits 0x00000100
+ #endif
+ #define DEC_Overflow 0x00000200
+ #define DEC_Clamped 0x00000400
+ #define DEC_Rounded 0x00000800
+ #define DEC_Subnormal 0x00001000
+ #define DEC_Underflow 0x00002000
+ #else
+ /* IEEE flags only */
+ #define DEC_Conversion_syntax 0x00000010
+ #define DEC_Division_by_zero 0x00000002
+ #define DEC_Division_impossible 0x00000010
+ #define DEC_Division_undefined 0x00000010
+ #define DEC_Insufficient_storage 0x00000010 /* [when malloc fails] */
+ #define DEC_Inexact 0x00000001
+ #define DEC_Invalid_context 0x00000010
+ #define DEC_Invalid_operation 0x00000010
+ #if DECSUBSET
+ #define DEC_Lost_digits 0x00000000
+ #endif
+ #define DEC_Overflow 0x00000008
+ #define DEC_Clamped 0x00000000
+ #define DEC_Rounded 0x00000000
+ #define DEC_Subnormal 0x00000000
+ #define DEC_Underflow 0x00000004
+ #endif
+
+ /* IEEE 854 groupings for the flags */
+ /* [DEC_Clamped, DEC_Lost_digits, DEC_Rounded, and DEC_Subnormal */
+ /* are not in IEEE 854] */
+ #define DEC_IEEE_854_Division_by_zero (DEC_Division_by_zero)
+ #if DECSUBSET
+ #define DEC_IEEE_854_Inexact (DEC_Inexact | DEC_Lost_digits)
+ #else
+ #define DEC_IEEE_854_Inexact (DEC_Inexact)
+ #endif
+ #define DEC_IEEE_854_Invalid_operation (DEC_Conversion_syntax | \
+ DEC_Division_impossible | \
+ DEC_Division_undefined | \
+ DEC_Insufficient_storage | \
+ DEC_Invalid_context | \
+ DEC_Invalid_operation)
+ #define DEC_IEEE_854_Overflow (DEC_Overflow)
+ #define DEC_IEEE_854_Underflow (DEC_Underflow)
+
+ /* flags which are normally errors (result is qNaN, infinite, or 0) */
+ #define DEC_Errors (DEC_IEEE_854_Division_by_zero | \
+ DEC_IEEE_854_Invalid_operation | \
+ DEC_IEEE_854_Overflow | DEC_IEEE_854_Underflow)
+ /* flags which cause a result to become qNaN */
+ #define DEC_NaNs DEC_IEEE_854_Invalid_operation
+
+ /* flags which are normally for information only (finite results) */
+ #if DECSUBSET
+ #define DEC_Information (DEC_Clamped | DEC_Rounded | DEC_Inexact \
+ | DEC_Lost_digits)
+ #else
+ #define DEC_Information (DEC_Clamped | DEC_Rounded | DEC_Inexact)
+ #endif
+
+ /* Name strings for the exceptional conditions */
+ #define DEC_Condition_CS "Conversion syntax"
+ #define DEC_Condition_DZ "Division by zero"
+ #define DEC_Condition_DI "Division impossible"
+ #define DEC_Condition_DU "Division undefined"
+ #define DEC_Condition_IE "Inexact"
+ #define DEC_Condition_IS "Insufficient storage"
+ #define DEC_Condition_IC "Invalid context"
+ #define DEC_Condition_IO "Invalid operation"
+ #if DECSUBSET
+ #define DEC_Condition_LD "Lost digits"
+ #endif
+ #define DEC_Condition_OV "Overflow"
+ #define DEC_Condition_PA "Clamped"
+ #define DEC_Condition_RO "Rounded"
+ #define DEC_Condition_SU "Subnormal"
+ #define DEC_Condition_UN "Underflow"
+ #define DEC_Condition_ZE "No status"
+ #define DEC_Condition_MU "Multiple status"
+ #define DEC_Condition_Length 21 /* length of the longest string, */
+ /* including terminator */
+
+ /* Initialization descriptors, used by decContextDefault */
+ #define DEC_INIT_BASE 0
+ #define DEC_INIT_DECIMAL32 32
+ #define DEC_INIT_DECIMAL64 64
+ #define DEC_INIT_DECIMAL128 128
+ /* Synonyms */
+ #define DEC_INIT_DECSINGLE DEC_INIT_DECIMAL32
+ #define DEC_INIT_DECDOUBLE DEC_INIT_DECIMAL64
+ #define DEC_INIT_DECQUAD DEC_INIT_DECIMAL128
+
+ /* decContext routines */
+
+ #include "decContextSymbols.h"
+
+ extern decContext * decContextClearStatus(decContext *, uint32_t);
+ extern decContext * decContextDefault(decContext *, int32_t);
+ extern enum rounding decContextGetRounding(decContext *);
+ extern uint32_t decContextGetStatus(decContext *);
+ extern decContext * decContextRestoreStatus(decContext *, uint32_t, uint32_t);
+ extern uint32_t decContextSaveStatus(decContext *, uint32_t);
+ extern decContext * decContextSetRounding(decContext *, enum rounding);
+ extern decContext * decContextSetStatus(decContext *, uint32_t);
+ extern decContext * decContextSetStatusFromString(decContext *, const char *);
+ extern decContext * decContextSetStatusFromStringQuiet(decContext *, const char *);
+ extern decContext * decContextSetStatusQuiet(decContext *, uint32_t);
+ extern const char * decContextStatusToString(const decContext *);
+ extern uint32_t decContextTestSavedStatus(uint32_t, uint32_t);
+ extern uint32_t decContextTestStatus(decContext *, uint32_t);
+ extern decContext * decContextZeroStatus(decContext *);
+
+#endif
diff --git a/libdecnumber/decContextSymbols.h b/libdecnumber/decContextSymbols.h
new file mode 100644
index 0000000..38830a9
--- /dev/null
+++ b/libdecnumber/decContextSymbols.h
@@ -0,0 +1,22 @@
+#if !defined(DECCONTEXTSYMBOLS)
+#define DECCONTEXTSYMBOLS
+
+#ifdef IN_LIBGCC2
+#define decContextClearStatus __decContextClearStatus
+#define decContextDefault __decContextDefault
+#define decContextGetRounding __decContextGetRounding
+#define decContextGetStatus __decContextGetStatus
+#define decContextRestoreStatus __decContextRestoreStatus
+#define decContextSaveStatus __decContextSaveStatus
+#define decContextSetRounding __decContextSetRounding
+#define decContextSetStatus __decContextSetStatus
+#define decContextSetStatusFromString __decContextSetStatusFromString
+#define decContextSetStatusFromStringQuiet __decContextSetStatusFromStringQuiet
+#define decContextSetStatusQuiet __decContextSetStatusQuiet
+#define decContextStatusToString __decContextStatusToString
+#define decContextTestSavedStatus __decContextTestSavedStatus
+#define decContextTestStatus __decContextTestStatus
+#define decContextZeroStatus __decContextZeroStatus
+#endif
+
+#endif
diff --git a/libdecnumber/decDPD.h b/libdecnumber/decDPD.h
new file mode 100644
index 0000000..8e0347c
--- /dev/null
+++ b/libdecnumber/decDPD.h
@@ -0,0 +1,1214 @@
+/* Conversion lookup tables for the decNumber C Library.
+ Copyright (C) 2007 Free Software Foundation, Inc.
+ Contributed by IBM Corporation. Author Mike Cowlishaw.
+
+ This file is part of GCC.
+
+ GCC is free software; you can redistribute it and/or modify it under
+ the terms of the GNU General Public License as published by the Free
+ Software Foundation; either version 2, or (at your option) any later
+ version.
+
+ In addition to the permissions in the GNU General Public License,
+ the Free Software Foundation gives you unlimited permission to link
+ the compiled version of this file into combinations with other
+ programs, and to distribute those combinations without any
+ restriction coming from the use of this file. (The General Public
+ License restrictions do apply in other respects; for example, they
+ cover modification of the file, and distribution when not linked
+ into a combine executable.)
+
+ GCC is distributed in the hope that it will be useful, but WITHOUT ANY
+ WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
+ for more details.
+
+ You should have received a copy of the GNU General Public License
+ along with GCC; see the file COPYING. If not, write to the Free
+ Software Foundation, 51 Franklin Street, Fifth Floor, Boston, MA
+ 02110-1301, USA. */
+
+/* ------------------------------------------------------------------------ */
+/* Binary Coded Decimal and Densely Packed Decimal conversion lookup tables */
+/* [Automatically generated -- do not edit. 2007.05.05] */
+/* ------------------------------------------------------------------------ */
+/* ------------------------------------------------------------------------ */
+/* For details, see: http://www2.hursley.ibm.com/decimal/DPDecimal.html */
+/* */
+/* This include file defines several DPD and BCD conversion tables: */
+/* */
+/* uint16_t BCD2DPD[2458]; -- BCD -> DPD (0x999 => 2457) */
+/* uint16_t BIN2DPD[1000]; -- Bin -> DPD (999 => 2457) */
+/* uint8_t BIN2CHAR[4001]; -- Bin -> CHAR (999 => '\3' '9' '9' '9') */
+/* uint8_t BIN2BCD8[4000]; -- Bin -> bytes (999 => 9 9 9 3) */
+/* uint16_t DPD2BCD[1024]; -- DPD -> BCD (0x3FF => 0x999) */
+/* uint16_t DPD2BIN[1024]; -- DPD -> BIN (0x3FF => 999) */
+/* uint32_t DPD2BINK[1024]; -- DPD -> BIN * 1000 (0x3FF => 999000) */
+/* uint32_t DPD2BINM[1024]; -- DPD -> BIN * 1E+6 (0x3FF => 999000000) */
+/* uint8_t DPD2BCD8[4096]; -- DPD -> bytes (x3FF => 9 9 9 3) */
+/* */
+/* In all cases the result (10 bits or 12 bits, or binary) is right-aligned */
+/* in the table entry. BIN2CHAR entries are a single byte length (0 for */
+/* value 0) followed by three digit characters; a trailing terminator is */
+/* included to allow 4-char moves always. BIN2BCD8 and DPD2BCD8 entries */
+/* are similar with the three BCD8 digits followed by a one-byte length */
+/* (again, length=0 for value 0). */
+/* */
+/* To use a table, its name, prefixed with DEC_, must be defined with a */
+/* value of 1 before this header file is included. For example: */
+/* #define DEC_BCD2DPD 1 */
+/* This mechanism allows software to only include tables that are needed. */
+/* ------------------------------------------------------------------------ */
+
+#if defined(DEC_BCD2DPD) && DEC_BCD2DPD==1 && !defined(DECBCD2DPD)
+#define DECBCD2DPD
+
+const uint16_t BCD2DPD[2458]={ 0, 1, 2, 3, 4, 5, 6, 7,
+ 8, 9, 0, 0, 0, 0, 0, 0, 16, 17, 18, 19, 20,
+ 21, 22, 23, 24, 25, 0, 0, 0, 0, 0, 0, 32, 33,
+ 34, 35, 36, 37, 38, 39, 40, 41, 0, 0, 0, 0, 0,
+ 0, 48, 49, 50, 51, 52, 53, 54, 55, 56, 57, 0, 0,
+ 0, 0, 0, 0, 64, 65, 66, 67, 68, 69, 70, 71, 72,
+ 73, 0, 0, 0, 0, 0, 0, 80, 81, 82, 83, 84, 85,
+ 86, 87, 88, 89, 0, 0, 0, 0, 0, 0, 96, 97, 98,
+ 99, 100, 101, 102, 103, 104, 105, 0, 0, 0, 0, 0, 0,
+ 112, 113, 114, 115, 116, 117, 118, 119, 120, 121, 0, 0, 0,
+ 0, 0, 0, 10, 11, 42, 43, 74, 75, 106, 107, 78, 79,
+ 0, 0, 0, 0, 0, 0, 26, 27, 58, 59, 90, 91, 122,
+ 123, 94, 95, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
+ 0, 128, 129, 130, 131, 132, 133, 134, 135, 136, 137, 0, 0,
+ 0, 0, 0, 0, 144, 145, 146, 147, 148, 149, 150, 151, 152,
+ 153, 0, 0, 0, 0, 0, 0, 160, 161, 162, 163, 164, 165,
+ 166, 167, 168, 169, 0, 0, 0, 0, 0, 0, 176, 177, 178,
+ 179, 180, 181, 182, 183, 184, 185, 0, 0, 0, 0, 0, 0,
+ 192, 193, 194, 195, 196, 197, 198, 199, 200, 201, 0, 0, 0,
+ 0, 0, 0, 208, 209, 210, 211, 212, 213, 214, 215, 216, 217,
+ 0, 0, 0, 0, 0, 0, 224, 225, 226, 227, 228, 229, 230,
+ 231, 232, 233, 0, 0, 0, 0, 0, 0, 240, 241, 242, 243,
+ 244, 245, 246, 247, 248, 249, 0, 0, 0, 0, 0, 0, 138,
+ 139, 170, 171, 202, 203, 234, 235, 206, 207, 0, 0, 0, 0,
+ 0, 0, 154, 155, 186, 187, 218, 219, 250, 251, 222, 223, 0,
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 256, 257, 258,
+ 259, 260, 261, 262, 263, 264, 265, 0, 0, 0, 0, 0, 0,
+ 272, 273, 274, 275, 276, 277, 278, 279, 280, 281, 0, 0, 0,
+ 0, 0, 0, 288, 289, 290, 291, 292, 293, 294, 295, 296, 297,
+ 0, 0, 0, 0, 0, 0, 304, 305, 306, 307, 308, 309, 310,
+ 311, 312, 313, 0, 0, 0, 0, 0, 0, 320, 321, 322, 323,
+ 324, 325, 326, 327, 328, 329, 0, 0, 0, 0, 0, 0, 336,
+ 337, 338, 339, 340, 341, 342, 343, 344, 345, 0, 0, 0, 0,
+ 0, 0, 352, 353, 354, 355, 356, 357, 358, 359, 360, 361, 0,
+ 0, 0, 0, 0, 0, 368, 369, 370, 371, 372, 373, 374, 375,
+ 376, 377, 0, 0, 0, 0, 0, 0, 266, 267, 298, 299, 330,
+ 331, 362, 363, 334, 335, 0, 0, 0, 0, 0, 0, 282, 283,
+ 314, 315, 346, 347, 378, 379, 350, 351, 0, 0, 0, 0, 0,
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
+ 0, 0, 0, 0, 0, 0, 384, 385, 386, 387, 388, 389, 390,
+ 391, 392, 393, 0, 0, 0, 0, 0, 0, 400, 401, 402, 403,
+ 404, 405, 406, 407, 408, 409, 0, 0, 0, 0, 0, 0, 416,
+ 417, 418, 419, 420, 421, 422, 423, 424, 425, 0, 0, 0, 0,
+ 0, 0, 432, 433, 434, 435, 436, 437, 438, 439, 440, 441, 0,
+ 0, 0, 0, 0, 0, 448, 449, 450, 451, 452, 453, 454, 455,
+ 456, 457, 0, 0, 0, 0, 0, 0, 464, 465, 466, 467, 468,
+ 469, 470, 471, 472, 473, 0, 0, 0, 0, 0, 0, 480, 481,
+ 482, 483, 484, 485, 486, 487, 488, 489, 0, 0, 0, 0, 0,
+ 0, 496, 497, 498, 499, 500, 501, 502, 503, 504, 505, 0, 0,
+ 0, 0, 0, 0, 394, 395, 426, 427, 458, 459, 490, 491, 462,
+ 463, 0, 0, 0, 0, 0, 0, 410, 411, 442, 443, 474, 475,
+ 506, 507, 478, 479, 0, 0, 0, 0, 0, 0, 0, 0, 0,
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
+ 0, 0, 512, 513, 514, 515, 516, 517, 518, 519, 520, 521, 0,
+ 0, 0, 0, 0, 0, 528, 529, 530, 531, 532, 533, 534, 535,
+ 536, 537, 0, 0, 0, 0, 0, 0, 544, 545, 546, 547, 548,
+ 549, 550, 551, 552, 553, 0, 0, 0, 0, 0, 0, 560, 561,
+ 562, 563, 564, 565, 566, 567, 568, 569, 0, 0, 0, 0, 0,
+ 0, 576, 577, 578, 579, 580, 581, 582, 583, 584, 585, 0, 0,
+ 0, 0, 0, 0, 592, 593, 594, 595, 596, 597, 598, 599, 600,
+ 601, 0, 0, 0, 0, 0, 0, 608, 609, 610, 611, 612, 613,
+ 614, 615, 616, 617, 0, 0, 0, 0, 0, 0, 624, 625, 626,
+ 627, 628, 629, 630, 631, 632, 633, 0, 0, 0, 0, 0, 0,
+ 522, 523, 554, 555, 586, 587, 618, 619, 590, 591, 0, 0, 0,
+ 0, 0, 0, 538, 539, 570, 571, 602, 603, 634, 635, 606, 607,
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 640, 641,
+ 642, 643, 644, 645, 646, 647, 648, 649, 0, 0, 0, 0, 0,
+ 0, 656, 657, 658, 659, 660, 661, 662, 663, 664, 665, 0, 0,
+ 0, 0, 0, 0, 672, 673, 674, 675, 676, 677, 678, 679, 680,
+ 681, 0, 0, 0, 0, 0, 0, 688, 689, 690, 691, 692, 693,
+ 694, 695, 696, 697, 0, 0, 0, 0, 0, 0, 704, 705, 706,
+ 707, 708, 709, 710, 711, 712, 713, 0, 0, 0, 0, 0, 0,
+ 720, 721, 722, 723, 724, 725, 726, 727, 728, 729, 0, 0, 0,
+ 0, 0, 0, 736, 737, 738, 739, 740, 741, 742, 743, 744, 745,
+ 0, 0, 0, 0, 0, 0, 752, 753, 754, 755, 756, 757, 758,
+ 759, 760, 761, 0, 0, 0, 0, 0, 0, 650, 651, 682, 683,
+ 714, 715, 746, 747, 718, 719, 0, 0, 0, 0, 0, 0, 666,
+ 667, 698, 699, 730, 731, 762, 763, 734, 735, 0, 0, 0, 0,
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
+ 0, 0, 0, 0, 0, 0, 0, 768, 769, 770, 771, 772, 773,
+ 774, 775, 776, 777, 0, 0, 0, 0, 0, 0, 784, 785, 786,
+ 787, 788, 789, 790, 791, 792, 793, 0, 0, 0, 0, 0, 0,
+ 800, 801, 802, 803, 804, 805, 806, 807, 808, 809, 0, 0, 0,
+ 0, 0, 0, 816, 817, 818, 819, 820, 821, 822, 823, 824, 825,
+ 0, 0, 0, 0, 0, 0, 832, 833, 834, 835, 836, 837, 838,
+ 839, 840, 841, 0, 0, 0, 0, 0, 0, 848, 849, 850, 851,
+ 852, 853, 854, 855, 856, 857, 0, 0, 0, 0, 0, 0, 864,
+ 865, 866, 867, 868, 869, 870, 871, 872, 873, 0, 0, 0, 0,
+ 0, 0, 880, 881, 882, 883, 884, 885, 886, 887, 888, 889, 0,
+ 0, 0, 0, 0, 0, 778, 779, 810, 811, 842, 843, 874, 875,
+ 846, 847, 0, 0, 0, 0, 0, 0, 794, 795, 826, 827, 858,
+ 859, 890, 891, 862, 863, 0, 0, 0, 0, 0, 0, 0, 0,
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
+ 0, 0, 0, 896, 897, 898, 899, 900, 901, 902, 903, 904, 905,
+ 0, 0, 0, 0, 0, 0, 912, 913, 914, 915, 916, 917, 918,
+ 919, 920, 921, 0, 0, 0, 0, 0, 0, 928, 929, 930, 931,
+ 932, 933, 934, 935, 936, 937, 0, 0, 0, 0, 0, 0, 944,
+ 945, 946, 947, 948, 949, 950, 951, 952, 953, 0, 0, 0, 0,
+ 0, 0, 960, 961, 962, 963, 964, 965, 966, 967, 968, 969, 0,
+ 0, 0, 0, 0, 0, 976, 977, 978, 979, 980, 981, 982, 983,
+ 984, 985, 0, 0, 0, 0, 0, 0, 992, 993, 994, 995, 996,
+ 997, 998, 999, 1000, 1001, 0, 0, 0, 0, 0, 0, 1008, 1009,
+ 1010, 1011, 1012, 1013, 1014, 1015, 1016, 1017, 0, 0, 0, 0, 0,
+ 0, 906, 907, 938, 939, 970, 971, 1002, 1003, 974, 975, 0, 0,
+ 0, 0, 0, 0, 922, 923, 954, 955, 986, 987, 1018, 1019, 990,
+ 991, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 12,
+ 13, 268, 269, 524, 525, 780, 781, 46, 47, 0, 0, 0, 0,
+ 0, 0, 28, 29, 284, 285, 540, 541, 796, 797, 62, 63, 0,
+ 0, 0, 0, 0, 0, 44, 45, 300, 301, 556, 557, 812, 813,
+ 302, 303, 0, 0, 0, 0, 0, 0, 60, 61, 316, 317, 572,
+ 573, 828, 829, 318, 319, 0, 0, 0, 0, 0, 0, 76, 77,
+ 332, 333, 588, 589, 844, 845, 558, 559, 0, 0, 0, 0, 0,
+ 0, 92, 93, 348, 349, 604, 605, 860, 861, 574, 575, 0, 0,
+ 0, 0, 0, 0, 108, 109, 364, 365, 620, 621, 876, 877, 814,
+ 815, 0, 0, 0, 0, 0, 0, 124, 125, 380, 381, 636, 637,
+ 892, 893, 830, 831, 0, 0, 0, 0, 0, 0, 14, 15, 270,
+ 271, 526, 527, 782, 783, 110, 111, 0, 0, 0, 0, 0, 0,
+ 30, 31, 286, 287, 542, 543, 798, 799, 126, 127, 0, 0, 0,
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
+ 0, 0, 0, 0, 0, 0, 0, 0, 140, 141, 396, 397, 652,
+ 653, 908, 909, 174, 175, 0, 0, 0, 0, 0, 0, 156, 157,
+ 412, 413, 668, 669, 924, 925, 190, 191, 0, 0, 0, 0, 0,
+ 0, 172, 173, 428, 429, 684, 685, 940, 941, 430, 431, 0, 0,
+ 0, 0, 0, 0, 188, 189, 444, 445, 700, 701, 956, 957, 446,
+ 447, 0, 0, 0, 0, 0, 0, 204, 205, 460, 461, 716, 717,
+ 972, 973, 686, 687, 0, 0, 0, 0, 0, 0, 220, 221, 476,
+ 477, 732, 733, 988, 989, 702, 703, 0, 0, 0, 0, 0, 0,
+ 236, 237, 492, 493, 748, 749, 1004, 1005, 942, 943, 0, 0, 0,
+ 0, 0, 0, 252, 253, 508, 509, 764, 765, 1020, 1021, 958, 959,
+ 0, 0, 0, 0, 0, 0, 142, 143, 398, 399, 654, 655, 910,
+ 911, 238, 239, 0, 0, 0, 0, 0, 0, 158, 159, 414, 415,
+ 670, 671, 926, 927, 254, 255};
+#endif
+
+#if defined(DEC_DPD2BCD) && DEC_DPD2BCD==1 && !defined(DECDPD2BCD)
+#define DECDPD2BCD
+
+const uint16_t DPD2BCD[1024]={ 0, 1, 2, 3, 4, 5, 6, 7,
+ 8, 9, 128, 129, 2048, 2049, 2176, 2177, 16, 17, 18, 19, 20,
+ 21, 22, 23, 24, 25, 144, 145, 2064, 2065, 2192, 2193, 32, 33,
+ 34, 35, 36, 37, 38, 39, 40, 41, 130, 131, 2080, 2081, 2056,
+ 2057, 48, 49, 50, 51, 52, 53, 54, 55, 56, 57, 146, 147,
+ 2096, 2097, 2072, 2073, 64, 65, 66, 67, 68, 69, 70, 71, 72,
+ 73, 132, 133, 2112, 2113, 136, 137, 80, 81, 82, 83, 84, 85,
+ 86, 87, 88, 89, 148, 149, 2128, 2129, 152, 153, 96, 97, 98,
+ 99, 100, 101, 102, 103, 104, 105, 134, 135, 2144, 2145, 2184, 2185,
+ 112, 113, 114, 115, 116, 117, 118, 119, 120, 121, 150, 151, 2160,
+ 2161, 2200, 2201, 256, 257, 258, 259, 260, 261, 262, 263, 264, 265,
+ 384, 385, 2304, 2305, 2432, 2433, 272, 273, 274, 275, 276, 277, 278,
+ 279, 280, 281, 400, 401, 2320, 2321, 2448, 2449, 288, 289, 290, 291,
+ 292, 293, 294, 295, 296, 297, 386, 387, 2336, 2337, 2312, 2313, 304,
+ 305, 306, 307, 308, 309, 310, 311, 312, 313, 402, 403, 2352, 2353,
+ 2328, 2329, 320, 321, 322, 323, 324, 325, 326, 327, 328, 329, 388,
+ 389, 2368, 2369, 392, 393, 336, 337, 338, 339, 340, 341, 342, 343,
+ 344, 345, 404, 405, 2384, 2385, 408, 409, 352, 353, 354, 355, 356,
+ 357, 358, 359, 360, 361, 390, 391, 2400, 2401, 2440, 2441, 368, 369,
+ 370, 371, 372, 373, 374, 375, 376, 377, 406, 407, 2416, 2417, 2456,
+ 2457, 512, 513, 514, 515, 516, 517, 518, 519, 520, 521, 640, 641,
+ 2050, 2051, 2178, 2179, 528, 529, 530, 531, 532, 533, 534, 535, 536,
+ 537, 656, 657, 2066, 2067, 2194, 2195, 544, 545, 546, 547, 548, 549,
+ 550, 551, 552, 553, 642, 643, 2082, 2083, 2088, 2089, 560, 561, 562,
+ 563, 564, 565, 566, 567, 568, 569, 658, 659, 2098, 2099, 2104, 2105,
+ 576, 577, 578, 579, 580, 581, 582, 583, 584, 585, 644, 645, 2114,
+ 2115, 648, 649, 592, 593, 594, 595, 596, 597, 598, 599, 600, 601,
+ 660, 661, 2130, 2131, 664, 665, 608, 609, 610, 611, 612, 613, 614,
+ 615, 616, 617, 646, 647, 2146, 2147, 2184, 2185, 624, 625, 626, 627,
+ 628, 629, 630, 631, 632, 633, 662, 663, 2162, 2163, 2200, 2201, 768,
+ 769, 770, 771, 772, 773, 774, 775, 776, 777, 896, 897, 2306, 2307,
+ 2434, 2435, 784, 785, 786, 787, 788, 789, 790, 791, 792, 793, 912,
+ 913, 2322, 2323, 2450, 2451, 800, 801, 802, 803, 804, 805, 806, 807,
+ 808, 809, 898, 899, 2338, 2339, 2344, 2345, 816, 817, 818, 819, 820,
+ 821, 822, 823, 824, 825, 914, 915, 2354, 2355, 2360, 2361, 832, 833,
+ 834, 835, 836, 837, 838, 839, 840, 841, 900, 901, 2370, 2371, 904,
+ 905, 848, 849, 850, 851, 852, 853, 854, 855, 856, 857, 916, 917,
+ 2386, 2387, 920, 921, 864, 865, 866, 867, 868, 869, 870, 871, 872,
+ 873, 902, 903, 2402, 2403, 2440, 2441, 880, 881, 882, 883, 884, 885,
+ 886, 887, 888, 889, 918, 919, 2418, 2419, 2456, 2457, 1024, 1025, 1026,
+ 1027, 1028, 1029, 1030, 1031, 1032, 1033, 1152, 1153, 2052, 2053, 2180, 2181,
+ 1040, 1041, 1042, 1043, 1044, 1045, 1046, 1047, 1048, 1049, 1168, 1169, 2068,
+ 2069, 2196, 2197, 1056, 1057, 1058, 1059, 1060, 1061, 1062, 1063, 1064, 1065,
+ 1154, 1155, 2084, 2085, 2120, 2121, 1072, 1073, 1074, 1075, 1076, 1077, 1078,
+ 1079, 1080, 1081, 1170, 1171, 2100, 2101, 2136, 2137, 1088, 1089, 1090, 1091,
+ 1092, 1093, 1094, 1095, 1096, 1097, 1156, 1157, 2116, 2117, 1160, 1161, 1104,
+ 1105, 1106, 1107, 1108, 1109, 1110, 1111, 1112, 1113, 1172, 1173, 2132, 2133,
+ 1176, 1177, 1120, 1121, 1122, 1123, 1124, 1125, 1126, 1127, 1128, 1129, 1158,
+ 1159, 2148, 2149, 2184, 2185, 1136, 1137, 1138, 1139, 1140, 1141, 1142, 1143,
+ 1144, 1145, 1174, 1175, 2164, 2165, 2200, 2201, 1280, 1281, 1282, 1283, 1284,
+ 1285, 1286, 1287, 1288, 1289, 1408, 1409, 2308, 2309, 2436, 2437, 1296, 1297,
+ 1298, 1299, 1300, 1301, 1302, 1303, 1304, 1305, 1424, 1425, 2324, 2325, 2452,
+ 2453, 1312, 1313, 1314, 1315, 1316, 1317, 1318, 1319, 1320, 1321, 1410, 1411,
+ 2340, 2341, 2376, 2377, 1328, 1329, 1330, 1331, 1332, 1333, 1334, 1335, 1336,
+ 1337, 1426, 1427, 2356, 2357, 2392, 2393, 1344, 1345, 1346, 1347, 1348, 1349,
+ 1350, 1351, 1352, 1353, 1412, 1413, 2372, 2373, 1416, 1417, 1360, 1361, 1362,
+ 1363, 1364, 1365, 1366, 1367, 1368, 1369, 1428, 1429, 2388, 2389, 1432, 1433,
+ 1376, 1377, 1378, 1379, 1380, 1381, 1382, 1383, 1384, 1385, 1414, 1415, 2404,
+ 2405, 2440, 2441, 1392, 1393, 1394, 1395, 1396, 1397, 1398, 1399, 1400, 1401,
+ 1430, 1431, 2420, 2421, 2456, 2457, 1536, 1537, 1538, 1539, 1540, 1541, 1542,
+ 1543, 1544, 1545, 1664, 1665, 2054, 2055, 2182, 2183, 1552, 1553, 1554, 1555,
+ 1556, 1557, 1558, 1559, 1560, 1561, 1680, 1681, 2070, 2071, 2198, 2199, 1568,
+ 1569, 1570, 1571, 1572, 1573, 1574, 1575, 1576, 1577, 1666, 1667, 2086, 2087,
+ 2152, 2153, 1584, 1585, 1586, 1587, 1588, 1589, 1590, 1591, 1592, 1593, 1682,
+ 1683, 2102, 2103, 2168, 2169, 1600, 1601, 1602, 1603, 1604, 1605, 1606, 1607,
+ 1608, 1609, 1668, 1669, 2118, 2119, 1672, 1673, 1616, 1617, 1618, 1619, 1620,
+ 1621, 1622, 1623, 1624, 1625, 1684, 1685, 2134, 2135, 1688, 1689, 1632, 1633,
+ 1634, 1635, 1636, 1637, 1638, 1639, 1640, 1641, 1670, 1671, 2150, 2151, 2184,
+ 2185, 1648, 1649, 1650, 1651, 1652, 1653, 1654, 1655, 1656, 1657, 1686, 1687,
+ 2166, 2167, 2200, 2201, 1792, 1793, 1794, 1795, 1796, 1797, 1798, 1799, 1800,
+ 1801, 1920, 1921, 2310, 2311, 2438, 2439, 1808, 1809, 1810, 1811, 1812, 1813,
+ 1814, 1815, 1816, 1817, 1936, 1937, 2326, 2327, 2454, 2455, 1824, 1825, 1826,
+ 1827, 1828, 1829, 1830, 1831, 1832, 1833, 1922, 1923, 2342, 2343, 2408, 2409,
+ 1840, 1841, 1842, 1843, 1844, 1845, 1846, 1847, 1848, 1849, 1938, 1939, 2358,
+ 2359, 2424, 2425, 1856, 1857, 1858, 1859, 1860, 1861, 1862, 1863, 1864, 1865,
+ 1924, 1925, 2374, 2375, 1928, 1929, 1872, 1873, 1874, 1875, 1876, 1877, 1878,
+ 1879, 1880, 1881, 1940, 1941, 2390, 2391, 1944, 1945, 1888, 1889, 1890, 1891,
+ 1892, 1893, 1894, 1895, 1896, 1897, 1926, 1927, 2406, 2407, 2440, 2441, 1904,
+ 1905, 1906, 1907, 1908, 1909, 1910, 1911, 1912, 1913, 1942, 1943, 2422, 2423,
+ 2456, 2457};
+#endif
+
+#if defined(DEC_BIN2DPD) && DEC_BIN2DPD==1 && !defined(DECBIN2DPD)
+#define DECBIN2DPD
+
+const uint16_t BIN2DPD[1000]={ 0, 1, 2, 3, 4, 5, 6, 7,
+ 8, 9, 16, 17, 18, 19, 20, 21, 22, 23, 24, 25, 32,
+ 33, 34, 35, 36, 37, 38, 39, 40, 41, 48, 49, 50, 51,
+ 52, 53, 54, 55, 56, 57, 64, 65, 66, 67, 68, 69, 70,
+ 71, 72, 73, 80, 81, 82, 83, 84, 85, 86, 87, 88, 89,
+ 96, 97, 98, 99, 100, 101, 102, 103, 104, 105, 112, 113, 114,
+ 115, 116, 117, 118, 119, 120, 121, 10, 11, 42, 43, 74, 75,
+ 106, 107, 78, 79, 26, 27, 58, 59, 90, 91, 122, 123, 94,
+ 95, 128, 129, 130, 131, 132, 133, 134, 135, 136, 137, 144, 145,
+ 146, 147, 148, 149, 150, 151, 152, 153, 160, 161, 162, 163, 164,
+ 165, 166, 167, 168, 169, 176, 177, 178, 179, 180, 181, 182, 183,
+ 184, 185, 192, 193, 194, 195, 196, 197, 198, 199, 200, 201, 208,
+ 209, 210, 211, 212, 213, 214, 215, 216, 217, 224, 225, 226, 227,
+ 228, 229, 230, 231, 232, 233, 240, 241, 242, 243, 244, 245, 246,
+ 247, 248, 249, 138, 139, 170, 171, 202, 203, 234, 235, 206, 207,
+ 154, 155, 186, 187, 218, 219, 250, 251, 222, 223, 256, 257, 258,
+ 259, 260, 261, 262, 263, 264, 265, 272, 273, 274, 275, 276, 277,
+ 278, 279, 280, 281, 288, 289, 290, 291, 292, 293, 294, 295, 296,
+ 297, 304, 305, 306, 307, 308, 309, 310, 311, 312, 313, 320, 321,
+ 322, 323, 324, 325, 326, 327, 328, 329, 336, 337, 338, 339, 340,
+ 341, 342, 343, 344, 345, 352, 353, 354, 355, 356, 357, 358, 359,
+ 360, 361, 368, 369, 370, 371, 372, 373, 374, 375, 376, 377, 266,
+ 267, 298, 299, 330, 331, 362, 363, 334, 335, 282, 283, 314, 315,
+ 346, 347, 378, 379, 350, 351, 384, 385, 386, 387, 388, 389, 390,
+ 391, 392, 393, 400, 401, 402, 403, 404, 405, 406, 407, 408, 409,
+ 416, 417, 418, 419, 420, 421, 422, 423, 424, 425, 432, 433, 434,
+ 435, 436, 437, 438, 439, 440, 441, 448, 449, 450, 451, 452, 453,
+ 454, 455, 456, 457, 464, 465, 466, 467, 468, 469, 470, 471, 472,
+ 473, 480, 481, 482, 483, 484, 485, 486, 487, 488, 489, 496, 497,
+ 498, 499, 500, 501, 502, 503, 504, 505, 394, 395, 426, 427, 458,
+ 459, 490, 491, 462, 463, 410, 411, 442, 443, 474, 475, 506, 507,
+ 478, 479, 512, 513, 514, 515, 516, 517, 518, 519, 520, 521, 528,
+ 529, 530, 531, 532, 533, 534, 535, 536, 537, 544, 545, 546, 547,
+ 548, 549, 550, 551, 552, 553, 560, 561, 562, 563, 564, 565, 566,
+ 567, 568, 569, 576, 577, 578, 579, 580, 581, 582, 583, 584, 585,
+ 592, 593, 594, 595, 596, 597, 598, 599, 600, 601, 608, 609, 610,
+ 611, 612, 613, 614, 615, 616, 617, 624, 625, 626, 627, 628, 629,
+ 630, 631, 632, 633, 522, 523, 554, 555, 586, 587, 618, 619, 590,
+ 591, 538, 539, 570, 571, 602, 603, 634, 635, 606, 607, 640, 641,
+ 642, 643, 644, 645, 646, 647, 648, 649, 656, 657, 658, 659, 660,
+ 661, 662, 663, 664, 665, 672, 673, 674, 675, 676, 677, 678, 679,
+ 680, 681, 688, 689, 690, 691, 692, 693, 694, 695, 696, 697, 704,
+ 705, 706, 707, 708, 709, 710, 711, 712, 713, 720, 721, 722, 723,
+ 724, 725, 726, 727, 728, 729, 736, 737, 738, 739, 740, 741, 742,
+ 743, 744, 745, 752, 753, 754, 755, 756, 757, 758, 759, 760, 761,
+ 650, 651, 682, 683, 714, 715, 746, 747, 718, 719, 666, 667, 698,
+ 699, 730, 731, 762, 763, 734, 735, 768, 769, 770, 771, 772, 773,
+ 774, 775, 776, 777, 784, 785, 786, 787, 788, 789, 790, 791, 792,
+ 793, 800, 801, 802, 803, 804, 805, 806, 807, 808, 809, 816, 817,
+ 818, 819, 820, 821, 822, 823, 824, 825, 832, 833, 834, 835, 836,
+ 837, 838, 839, 840, 841, 848, 849, 850, 851, 852, 853, 854, 855,
+ 856, 857, 864, 865, 866, 867, 868, 869, 870, 871, 872, 873, 880,
+ 881, 882, 883, 884, 885, 886, 887, 888, 889, 778, 779, 810, 811,
+ 842, 843, 874, 875, 846, 847, 794, 795, 826, 827, 858, 859, 890,
+ 891, 862, 863, 896, 897, 898, 899, 900, 901, 902, 903, 904, 905,
+ 912, 913, 914, 915, 916, 917, 918, 919, 920, 921, 928, 929, 930,
+ 931, 932, 933, 934, 935, 936, 937, 944, 945, 946, 947, 948, 949,
+ 950, 951, 952, 953, 960, 961, 962, 963, 964, 965, 966, 967, 968,
+ 969, 976, 977, 978, 979, 980, 981, 982, 983, 984, 985, 992, 993,
+ 994, 995, 996, 997, 998, 999, 1000, 1001, 1008, 1009, 1010, 1011, 1012,
+ 1013, 1014, 1015, 1016, 1017, 906, 907, 938, 939, 970, 971, 1002, 1003,
+ 974, 975, 922, 923, 954, 955, 986, 987, 1018, 1019, 990, 991, 12,
+ 13, 268, 269, 524, 525, 780, 781, 46, 47, 28, 29, 284, 285,
+ 540, 541, 796, 797, 62, 63, 44, 45, 300, 301, 556, 557, 812,
+ 813, 302, 303, 60, 61, 316, 317, 572, 573, 828, 829, 318, 319,
+ 76, 77, 332, 333, 588, 589, 844, 845, 558, 559, 92, 93, 348,
+ 349, 604, 605, 860, 861, 574, 575, 108, 109, 364, 365, 620, 621,
+ 876, 877, 814, 815, 124, 125, 380, 381, 636, 637, 892, 893, 830,
+ 831, 14, 15, 270, 271, 526, 527, 782, 783, 110, 111, 30, 31,
+ 286, 287, 542, 543, 798, 799, 126, 127, 140, 141, 396, 397, 652,
+ 653, 908, 909, 174, 175, 156, 157, 412, 413, 668, 669, 924, 925,
+ 190, 191, 172, 173, 428, 429, 684, 685, 940, 941, 430, 431, 188,
+ 189, 444, 445, 700, 701, 956, 957, 446, 447, 204, 205, 460, 461,
+ 716, 717, 972, 973, 686, 687, 220, 221, 476, 477, 732, 733, 988,
+ 989, 702, 703, 236, 237, 492, 493, 748, 749, 1004, 1005, 942, 943,
+ 252, 253, 508, 509, 764, 765, 1020, 1021, 958, 959, 142, 143, 398,
+ 399, 654, 655, 910, 911, 238, 239, 158, 159, 414, 415, 670, 671,
+ 926, 927, 254, 255};
+#endif
+
+#if defined(DEC_DPD2BIN) && DEC_DPD2BIN==1 && !defined(DECDPD2BIN)
+#define DECDPD2BIN
+
+const uint16_t DPD2BIN[1024]={ 0, 1, 2, 3, 4, 5, 6, 7,
+ 8, 9, 80, 81, 800, 801, 880, 881, 10, 11, 12, 13, 14,
+ 15, 16, 17, 18, 19, 90, 91, 810, 811, 890, 891, 20, 21,
+ 22, 23, 24, 25, 26, 27, 28, 29, 82, 83, 820, 821, 808,
+ 809, 30, 31, 32, 33, 34, 35, 36, 37, 38, 39, 92, 93,
+ 830, 831, 818, 819, 40, 41, 42, 43, 44, 45, 46, 47, 48,
+ 49, 84, 85, 840, 841, 88, 89, 50, 51, 52, 53, 54, 55,
+ 56, 57, 58, 59, 94, 95, 850, 851, 98, 99, 60, 61, 62,
+ 63, 64, 65, 66, 67, 68, 69, 86, 87, 860, 861, 888, 889,
+ 70, 71, 72, 73, 74, 75, 76, 77, 78, 79, 96, 97, 870,
+ 871, 898, 899, 100, 101, 102, 103, 104, 105, 106, 107, 108, 109,
+ 180, 181, 900, 901, 980, 981, 110, 111, 112, 113, 114, 115, 116,
+ 117, 118, 119, 190, 191, 910, 911, 990, 991, 120, 121, 122, 123,
+ 124, 125, 126, 127, 128, 129, 182, 183, 920, 921, 908, 909, 130,
+ 131, 132, 133, 134, 135, 136, 137, 138, 139, 192, 193, 930, 931,
+ 918, 919, 140, 141, 142, 143, 144, 145, 146, 147, 148, 149, 184,
+ 185, 940, 941, 188, 189, 150, 151, 152, 153, 154, 155, 156, 157,
+ 158, 159, 194, 195, 950, 951, 198, 199, 160, 161, 162, 163, 164,
+ 165, 166, 167, 168, 169, 186, 187, 960, 961, 988, 989, 170, 171,
+ 172, 173, 174, 175, 176, 177, 178, 179, 196, 197, 970, 971, 998,
+ 999, 200, 201, 202, 203, 204, 205, 206, 207, 208, 209, 280, 281,
+ 802, 803, 882, 883, 210, 211, 212, 213, 214, 215, 216, 217, 218,
+ 219, 290, 291, 812, 813, 892, 893, 220, 221, 222, 223, 224, 225,
+ 226, 227, 228, 229, 282, 283, 822, 823, 828, 829, 230, 231, 232,
+ 233, 234, 235, 236, 237, 238, 239, 292, 293, 832, 833, 838, 839,
+ 240, 241, 242, 243, 244, 245, 246, 247, 248, 249, 284, 285, 842,
+ 843, 288, 289, 250, 251, 252, 253, 254, 255, 256, 257, 258, 259,
+ 294, 295, 852, 853, 298, 299, 260, 261, 262, 263, 264, 265, 266,
+ 267, 268, 269, 286, 287, 862, 863, 888, 889, 270, 271, 272, 273,
+ 274, 275, 276, 277, 278, 279, 296, 297, 872, 873, 898, 899, 300,
+ 301, 302, 303, 304, 305, 306, 307, 308, 309, 380, 381, 902, 903,
+ 982, 983, 310, 311, 312, 313, 314, 315, 316, 317, 318, 319, 390,
+ 391, 912, 913, 992, 993, 320, 321, 322, 323, 324, 325, 326, 327,
+ 328, 329, 382, 383, 922, 923, 928, 929, 330, 331, 332, 333, 334,
+ 335, 336, 337, 338, 339, 392, 393, 932, 933, 938, 939, 340, 341,
+ 342, 343, 344, 345, 346, 347, 348, 349, 384, 385, 942, 943, 388,
+ 389, 350, 351, 352, 353, 354, 355, 356, 357, 358, 359, 394, 395,
+ 952, 953, 398, 399, 360, 361, 362, 363, 364, 365, 366, 367, 368,
+ 369, 386, 387, 962, 963, 988, 989, 370, 371, 372, 373, 374, 375,
+ 376, 377, 378, 379, 396, 397, 972, 973, 998, 999, 400, 401, 402,
+ 403, 404, 405, 406, 407, 408, 409, 480, 481, 804, 805, 884, 885,
+ 410, 411, 412, 413, 414, 415, 416, 417, 418, 419, 490, 491, 814,
+ 815, 894, 895, 420, 421, 422, 423, 424, 425, 426, 427, 428, 429,
+ 482, 483, 824, 825, 848, 849, 430, 431, 432, 433, 434, 435, 436,
+ 437, 438, 439, 492, 493, 834, 835, 858, 859, 440, 441, 442, 443,
+ 444, 445, 446, 447, 448, 449, 484, 485, 844, 845, 488, 489, 450,
+ 451, 452, 453, 454, 455, 456, 457, 458, 459, 494, 495, 854, 855,
+ 498, 499, 460, 461, 462, 463, 464, 465, 466, 467, 468, 469, 486,
+ 487, 864, 865, 888, 889, 470, 471, 472, 473, 474, 475, 476, 477,
+ 478, 479, 496, 497, 874, 875, 898, 899, 500, 501, 502, 503, 504,
+ 505, 506, 507, 508, 509, 580, 581, 904, 905, 984, 985, 510, 511,
+ 512, 513, 514, 515, 516, 517, 518, 519, 590, 591, 914, 915, 994,
+ 995, 520, 521, 522, 523, 524, 525, 526, 527, 528, 529, 582, 583,
+ 924, 925, 948, 949, 530, 531, 532, 533, 534, 535, 536, 537, 538,
+ 539, 592, 593, 934, 935, 958, 959, 540, 541, 542, 543, 544, 545,
+ 546, 547, 548, 549, 584, 585, 944, 945, 588, 589, 550, 551, 552,
+ 553, 554, 555, 556, 557, 558, 559, 594, 595, 954, 955, 598, 599,
+ 560, 561, 562, 563, 564, 565, 566, 567, 568, 569, 586, 587, 964,
+ 965, 988, 989, 570, 571, 572, 573, 574, 575, 576, 577, 578, 579,
+ 596, 597, 974, 975, 998, 999, 600, 601, 602, 603, 604, 605, 606,
+ 607, 608, 609, 680, 681, 806, 807, 886, 887, 610, 611, 612, 613,
+ 614, 615, 616, 617, 618, 619, 690, 691, 816, 817, 896, 897, 620,
+ 621, 622, 623, 624, 625, 626, 627, 628, 629, 682, 683, 826, 827,
+ 868, 869, 630, 631, 632, 633, 634, 635, 636, 637, 638, 639, 692,
+ 693, 836, 837, 878, 879, 640, 641, 642, 643, 644, 645, 646, 647,
+ 648, 649, 684, 685, 846, 847, 688, 689, 650, 651, 652, 653, 654,
+ 655, 656, 657, 658, 659, 694, 695, 856, 857, 698, 699, 660, 661,
+ 662, 663, 664, 665, 666, 667, 668, 669, 686, 687, 866, 867, 888,
+ 889, 670, 671, 672, 673, 674, 675, 676, 677, 678, 679, 696, 697,
+ 876, 877, 898, 899, 700, 701, 702, 703, 704, 705, 706, 707, 708,
+ 709, 780, 781, 906, 907, 986, 987, 710, 711, 712, 713, 714, 715,
+ 716, 717, 718, 719, 790, 791, 916, 917, 996, 997, 720, 721, 722,
+ 723, 724, 725, 726, 727, 728, 729, 782, 783, 926, 927, 968, 969,
+ 730, 731, 732, 733, 734, 735, 736, 737, 738, 739, 792, 793, 936,
+ 937, 978, 979, 740, 741, 742, 743, 744, 745, 746, 747, 748, 749,
+ 784, 785, 946, 947, 788, 789, 750, 751, 752, 753, 754, 755, 756,
+ 757, 758, 759, 794, 795, 956, 957, 798, 799, 760, 761, 762, 763,
+ 764, 765, 766, 767, 768, 769, 786, 787, 966, 967, 988, 989, 770,
+ 771, 772, 773, 774, 775, 776, 777, 778, 779, 796, 797, 976, 977,
+ 998, 999};
+#endif
+
+#if defined(DEC_DPD2BINK) && DEC_DPD2BINK==1 && !defined(DECDPD2BINK)
+#define DECDPD2BINK
+
+const uint32_t DPD2BINK[1024]={ 0, 1000, 2000, 3000, 4000, 5000,
+ 6000, 7000, 8000, 9000, 80000, 81000, 800000, 801000, 880000, 881000,
+ 10000, 11000, 12000, 13000, 14000, 15000, 16000, 17000, 18000, 19000,
+ 90000, 91000, 810000, 811000, 890000, 891000, 20000, 21000, 22000, 23000,
+ 24000, 25000, 26000, 27000, 28000, 29000, 82000, 83000, 820000, 821000,
+ 808000, 809000, 30000, 31000, 32000, 33000, 34000, 35000, 36000, 37000,
+ 38000, 39000, 92000, 93000, 830000, 831000, 818000, 819000, 40000, 41000,
+ 42000, 43000, 44000, 45000, 46000, 47000, 48000, 49000, 84000, 85000,
+ 840000, 841000, 88000, 89000, 50000, 51000, 52000, 53000, 54000, 55000,
+ 56000, 57000, 58000, 59000, 94000, 95000, 850000, 851000, 98000, 99000,
+ 60000, 61000, 62000, 63000, 64000, 65000, 66000, 67000, 68000, 69000,
+ 86000, 87000, 860000, 861000, 888000, 889000, 70000, 71000, 72000, 73000,
+ 74000, 75000, 76000, 77000, 78000, 79000, 96000, 97000, 870000, 871000,
+ 898000, 899000, 100000, 101000, 102000, 103000, 104000, 105000, 106000, 107000,
+ 108000, 109000, 180000, 181000, 900000, 901000, 980000, 981000, 110000, 111000,
+ 112000, 113000, 114000, 115000, 116000, 117000, 118000, 119000, 190000, 191000,
+ 910000, 911000, 990000, 991000, 120000, 121000, 122000, 123000, 124000, 125000,
+ 126000, 127000, 128000, 129000, 182000, 183000, 920000, 921000, 908000, 909000,
+ 130000, 131000, 132000, 133000, 134000, 135000, 136000, 137000, 138000, 139000,
+ 192000, 193000, 930000, 931000, 918000, 919000, 140000, 141000, 142000, 143000,
+ 144000, 145000, 146000, 147000, 148000, 149000, 184000, 185000, 940000, 941000,
+ 188000, 189000, 150000, 151000, 152000, 153000, 154000, 155000, 156000, 157000,
+ 158000, 159000, 194000, 195000, 950000, 951000, 198000, 199000, 160000, 161000,
+ 162000, 163000, 164000, 165000, 166000, 167000, 168000, 169000, 186000, 187000,
+ 960000, 961000, 988000, 989000, 170000, 171000, 172000, 173000, 174000, 175000,
+ 176000, 177000, 178000, 179000, 196000, 197000, 970000, 971000, 998000, 999000,
+ 200000, 201000, 202000, 203000, 204000, 205000, 206000, 207000, 208000, 209000,
+ 280000, 281000, 802000, 803000, 882000, 883000, 210000, 211000, 212000, 213000,
+ 214000, 215000, 216000, 217000, 218000, 219000, 290000, 291000, 812000, 813000,
+ 892000, 893000, 220000, 221000, 222000, 223000, 224000, 225000, 226000, 227000,
+ 228000, 229000, 282000, 283000, 822000, 823000, 828000, 829000, 230000, 231000,
+ 232000, 233000, 234000, 235000, 236000, 237000, 238000, 239000, 292000, 293000,
+ 832000, 833000, 838000, 839000, 240000, 241000, 242000, 243000, 244000, 245000,
+ 246000, 247000, 248000, 249000, 284000, 285000, 842000, 843000, 288000, 289000,
+ 250000, 251000, 252000, 253000, 254000, 255000, 256000, 257000, 258000, 259000,
+ 294000, 295000, 852000, 853000, 298000, 299000, 260000, 261000, 262000, 263000,
+ 264000, 265000, 266000, 267000, 268000, 269000, 286000, 287000, 862000, 863000,
+ 888000, 889000, 270000, 271000, 272000, 273000, 274000, 275000, 276000, 277000,
+ 278000, 279000, 296000, 297000, 872000, 873000, 898000, 899000, 300000, 301000,
+ 302000, 303000, 304000, 305000, 306000, 307000, 308000, 309000, 380000, 381000,
+ 902000, 903000, 982000, 983000, 310000, 311000, 312000, 313000, 314000, 315000,
+ 316000, 317000, 318000, 319000, 390000, 391000, 912000, 913000, 992000, 993000,
+ 320000, 321000, 322000, 323000, 324000, 325000, 326000, 327000, 328000, 329000,
+ 382000, 383000, 922000, 923000, 928000, 929000, 330000, 331000, 332000, 333000,
+ 334000, 335000, 336000, 337000, 338000, 339000, 392000, 393000, 932000, 933000,
+ 938000, 939000, 340000, 341000, 342000, 343000, 344000, 345000, 346000, 347000,
+ 348000, 349000, 384000, 385000, 942000, 943000, 388000, 389000, 350000, 351000,
+ 352000, 353000, 354000, 355000, 356000, 357000, 358000, 359000, 394000, 395000,
+ 952000, 953000, 398000, 399000, 360000, 361000, 362000, 363000, 364000, 365000,
+ 366000, 367000, 368000, 369000, 386000, 387000, 962000, 963000, 988000, 989000,
+ 370000, 371000, 372000, 373000, 374000, 375000, 376000, 377000, 378000, 379000,
+ 396000, 397000, 972000, 973000, 998000, 999000, 400000, 401000, 402000, 403000,
+ 404000, 405000, 406000, 407000, 408000, 409000, 480000, 481000, 804000, 805000,
+ 884000, 885000, 410000, 411000, 412000, 413000, 414000, 415000, 416000, 417000,
+ 418000, 419000, 490000, 491000, 814000, 815000, 894000, 895000, 420000, 421000,
+ 422000, 423000, 424000, 425000, 426000, 427000, 428000, 429000, 482000, 483000,
+ 824000, 825000, 848000, 849000, 430000, 431000, 432000, 433000, 434000, 435000,
+ 436000, 437000, 438000, 439000, 492000, 493000, 834000, 835000, 858000, 859000,
+ 440000, 441000, 442000, 443000, 444000, 445000, 446000, 447000, 448000, 449000,
+ 484000, 485000, 844000, 845000, 488000, 489000, 450000, 451000, 452000, 453000,
+ 454000, 455000, 456000, 457000, 458000, 459000, 494000, 495000, 854000, 855000,
+ 498000, 499000, 460000, 461000, 462000, 463000, 464000, 465000, 466000, 467000,
+ 468000, 469000, 486000, 487000, 864000, 865000, 888000, 889000, 470000, 471000,
+ 472000, 473000, 474000, 475000, 476000, 477000, 478000, 479000, 496000, 497000,
+ 874000, 875000, 898000, 899000, 500000, 501000, 502000, 503000, 504000, 505000,
+ 506000, 507000, 508000, 509000, 580000, 581000, 904000, 905000, 984000, 985000,
+ 510000, 511000, 512000, 513000, 514000, 515000, 516000, 517000, 518000, 519000,
+ 590000, 591000, 914000, 915000, 994000, 995000, 520000, 521000, 522000, 523000,
+ 524000, 525000, 526000, 527000, 528000, 529000, 582000, 583000, 924000, 925000,
+ 948000, 949000, 530000, 531000, 532000, 533000, 534000, 535000, 536000, 537000,
+ 538000, 539000, 592000, 593000, 934000, 935000, 958000, 959000, 540000, 541000,
+ 542000, 543000, 544000, 545000, 546000, 547000, 548000, 549000, 584000, 585000,
+ 944000, 945000, 588000, 589000, 550000, 551000, 552000, 553000, 554000, 555000,
+ 556000, 557000, 558000, 559000, 594000, 595000, 954000, 955000, 598000, 599000,
+ 560000, 561000, 562000, 563000, 564000, 565000, 566000, 567000, 568000, 569000,
+ 586000, 587000, 964000, 965000, 988000, 989000, 570000, 571000, 572000, 573000,
+ 574000, 575000, 576000, 577000, 578000, 579000, 596000, 597000, 974000, 975000,
+ 998000, 999000, 600000, 601000, 602000, 603000, 604000, 605000, 606000, 607000,
+ 608000, 609000, 680000, 681000, 806000, 807000, 886000, 887000, 610000, 611000,
+ 612000, 613000, 614000, 615000, 616000, 617000, 618000, 619000, 690000, 691000,
+ 816000, 817000, 896000, 897000, 620000, 621000, 622000, 623000, 624000, 625000,
+ 626000, 627000, 628000, 629000, 682000, 683000, 826000, 827000, 868000, 869000,
+ 630000, 631000, 632000, 633000, 634000, 635000, 636000, 637000, 638000, 639000,
+ 692000, 693000, 836000, 837000, 878000, 879000, 640000, 641000, 642000, 643000,
+ 644000, 645000, 646000, 647000, 648000, 649000, 684000, 685000, 846000, 847000,
+ 688000, 689000, 650000, 651000, 652000, 653000, 654000, 655000, 656000, 657000,
+ 658000, 659000, 694000, 695000, 856000, 857000, 698000, 699000, 660000, 661000,
+ 662000, 663000, 664000, 665000, 666000, 667000, 668000, 669000, 686000, 687000,
+ 866000, 867000, 888000, 889000, 670000, 671000, 672000, 673000, 674000, 675000,
+ 676000, 677000, 678000, 679000, 696000, 697000, 876000, 877000, 898000, 899000,
+ 700000, 701000, 702000, 703000, 704000, 705000, 706000, 707000, 708000, 709000,
+ 780000, 781000, 906000, 907000, 986000, 987000, 710000, 711000, 712000, 713000,
+ 714000, 715000, 716000, 717000, 718000, 719000, 790000, 791000, 916000, 917000,
+ 996000, 997000, 720000, 721000, 722000, 723000, 724000, 725000, 726000, 727000,
+ 728000, 729000, 782000, 783000, 926000, 927000, 968000, 969000, 730000, 731000,
+ 732000, 733000, 734000, 735000, 736000, 737000, 738000, 739000, 792000, 793000,
+ 936000, 937000, 978000, 979000, 740000, 741000, 742000, 743000, 744000, 745000,
+ 746000, 747000, 748000, 749000, 784000, 785000, 946000, 947000, 788000, 789000,
+ 750000, 751000, 752000, 753000, 754000, 755000, 756000, 757000, 758000, 759000,
+ 794000, 795000, 956000, 957000, 798000, 799000, 760000, 761000, 762000, 763000,
+ 764000, 765000, 766000, 767000, 768000, 769000, 786000, 787000, 966000, 967000,
+ 988000, 989000, 770000, 771000, 772000, 773000, 774000, 775000, 776000, 777000,
+ 778000, 779000, 796000, 797000, 976000, 977000, 998000, 999000};
+#endif
+
+#if defined(DEC_DPD2BINM) && DEC_DPD2BINM==1 && !defined(DECDPD2BINM)
+#define DECDPD2BINM
+
+const uint32_t DPD2BINM[1024]={0, 1000000, 2000000, 3000000, 4000000,
+ 5000000, 6000000, 7000000, 8000000, 9000000, 80000000, 81000000,
+ 800000000, 801000000, 880000000, 881000000, 10000000, 11000000, 12000000,
+ 13000000, 14000000, 15000000, 16000000, 17000000, 18000000, 19000000,
+ 90000000, 91000000, 810000000, 811000000, 890000000, 891000000, 20000000,
+ 21000000, 22000000, 23000000, 24000000, 25000000, 26000000, 27000000,
+ 28000000, 29000000, 82000000, 83000000, 820000000, 821000000, 808000000,
+ 809000000, 30000000, 31000000, 32000000, 33000000, 34000000, 35000000,
+ 36000000, 37000000, 38000000, 39000000, 92000000, 93000000, 830000000,
+ 831000000, 818000000, 819000000, 40000000, 41000000, 42000000, 43000000,
+ 44000000, 45000000, 46000000, 47000000, 48000000, 49000000, 84000000,
+ 85000000, 840000000, 841000000, 88000000, 89000000, 50000000, 51000000,
+ 52000000, 53000000, 54000000, 55000000, 56000000, 57000000, 58000000,
+ 59000000, 94000000, 95000000, 850000000, 851000000, 98000000, 99000000,
+ 60000000, 61000000, 62000000, 63000000, 64000000, 65000000, 66000000,
+ 67000000, 68000000, 69000000, 86000000, 87000000, 860000000, 861000000,
+ 888000000, 889000000, 70000000, 71000000, 72000000, 73000000, 74000000,
+ 75000000, 76000000, 77000000, 78000000, 79000000, 96000000, 97000000,
+ 870000000, 871000000, 898000000, 899000000, 100000000, 101000000, 102000000,
+ 103000000, 104000000, 105000000, 106000000, 107000000, 108000000, 109000000,
+ 180000000, 181000000, 900000000, 901000000, 980000000, 981000000, 110000000,
+ 111000000, 112000000, 113000000, 114000000, 115000000, 116000000, 117000000,
+ 118000000, 119000000, 190000000, 191000000, 910000000, 911000000, 990000000,
+ 991000000, 120000000, 121000000, 122000000, 123000000, 124000000, 125000000,
+ 126000000, 127000000, 128000000, 129000000, 182000000, 183000000, 920000000,
+ 921000000, 908000000, 909000000, 130000000, 131000000, 132000000, 133000000,
+ 134000000, 135000000, 136000000, 137000000, 138000000, 139000000, 192000000,
+ 193000000, 930000000, 931000000, 918000000, 919000000, 140000000, 141000000,
+ 142000000, 143000000, 144000000, 145000000, 146000000, 147000000, 148000000,
+ 149000000, 184000000, 185000000, 940000000, 941000000, 188000000, 189000000,
+ 150000000, 151000000, 152000000, 153000000, 154000000, 155000000, 156000000,
+ 157000000, 158000000, 159000000, 194000000, 195000000, 950000000, 951000000,
+ 198000000, 199000000, 160000000, 161000000, 162000000, 163000000, 164000000,
+ 165000000, 166000000, 167000000, 168000000, 169000000, 186000000, 187000000,
+ 960000000, 961000000, 988000000, 989000000, 170000000, 171000000, 172000000,
+ 173000000, 174000000, 175000000, 176000000, 177000000, 178000000, 179000000,
+ 196000000, 197000000, 970000000, 971000000, 998000000, 999000000, 200000000,
+ 201000000, 202000000, 203000000, 204000000, 205000000, 206000000, 207000000,
+ 208000000, 209000000, 280000000, 281000000, 802000000, 803000000, 882000000,
+ 883000000, 210000000, 211000000, 212000000, 213000000, 214000000, 215000000,
+ 216000000, 217000000, 218000000, 219000000, 290000000, 291000000, 812000000,
+ 813000000, 892000000, 893000000, 220000000, 221000000, 222000000, 223000000,
+ 224000000, 225000000, 226000000, 227000000, 228000000, 229000000, 282000000,
+ 283000000, 822000000, 823000000, 828000000, 829000000, 230000000, 231000000,
+ 232000000, 233000000, 234000000, 235000000, 236000000, 237000000, 238000000,
+ 239000000, 292000000, 293000000, 832000000, 833000000, 838000000, 839000000,
+ 240000000, 241000000, 242000000, 243000000, 244000000, 245000000, 246000000,
+ 247000000, 248000000, 249000000, 284000000, 285000000, 842000000, 843000000,
+ 288000000, 289000000, 250000000, 251000000, 252000000, 253000000, 254000000,
+ 255000000, 256000000, 257000000, 258000000, 259000000, 294000000, 295000000,
+ 852000000, 853000000, 298000000, 299000000, 260000000, 261000000, 262000000,
+ 263000000, 264000000, 265000000, 266000000, 267000000, 268000000, 269000000,
+ 286000000, 287000000, 862000000, 863000000, 888000000, 889000000, 270000000,
+ 271000000, 272000000, 273000000, 274000000, 275000000, 276000000, 277000000,
+ 278000000, 279000000, 296000000, 297000000, 872000000, 873000000, 898000000,
+ 899000000, 300000000, 301000000, 302000000, 303000000, 304000000, 305000000,
+ 306000000, 307000000, 308000000, 309000000, 380000000, 381000000, 902000000,
+ 903000000, 982000000, 983000000, 310000000, 311000000, 312000000, 313000000,
+ 314000000, 315000000, 316000000, 317000000, 318000000, 319000000, 390000000,
+ 391000000, 912000000, 913000000, 992000000, 993000000, 320000000, 321000000,
+ 322000000, 323000000, 324000000, 325000000, 326000000, 327000000, 328000000,
+ 329000000, 382000000, 383000000, 922000000, 923000000, 928000000, 929000000,
+ 330000000, 331000000, 332000000, 333000000, 334000000, 335000000, 336000000,
+ 337000000, 338000000, 339000000, 392000000, 393000000, 932000000, 933000000,
+ 938000000, 939000000, 340000000, 341000000, 342000000, 343000000, 344000000,
+ 345000000, 346000000, 347000000, 348000000, 349000000, 384000000, 385000000,
+ 942000000, 943000000, 388000000, 389000000, 350000000, 351000000, 352000000,
+ 353000000, 354000000, 355000000, 356000000, 357000000, 358000000, 359000000,
+ 394000000, 395000000, 952000000, 953000000, 398000000, 399000000, 360000000,
+ 361000000, 362000000, 363000000, 364000000, 365000000, 366000000, 367000000,
+ 368000000, 369000000, 386000000, 387000000, 962000000, 963000000, 988000000,
+ 989000000, 370000000, 371000000, 372000000, 373000000, 374000000, 375000000,
+ 376000000, 377000000, 378000000, 379000000, 396000000, 397000000, 972000000,
+ 973000000, 998000000, 999000000, 400000000, 401000000, 402000000, 403000000,
+ 404000000, 405000000, 406000000, 407000000, 408000000, 409000000, 480000000,
+ 481000000, 804000000, 805000000, 884000000, 885000000, 410000000, 411000000,
+ 412000000, 413000000, 414000000, 415000000, 416000000, 417000000, 418000000,
+ 419000000, 490000000, 491000000, 814000000, 815000000, 894000000, 895000000,
+ 420000000, 421000000, 422000000, 423000000, 424000000, 425000000, 426000000,
+ 427000000, 428000000, 429000000, 482000000, 483000000, 824000000, 825000000,
+ 848000000, 849000000, 430000000, 431000000, 432000000, 433000000, 434000000,
+ 435000000, 436000000, 437000000, 438000000, 439000000, 492000000, 493000000,
+ 834000000, 835000000, 858000000, 859000000, 440000000, 441000000, 442000000,
+ 443000000, 444000000, 445000000, 446000000, 447000000, 448000000, 449000000,
+ 484000000, 485000000, 844000000, 845000000, 488000000, 489000000, 450000000,
+ 451000000, 452000000, 453000000, 454000000, 455000000, 456000000, 457000000,
+ 458000000, 459000000, 494000000, 495000000, 854000000, 855000000, 498000000,
+ 499000000, 460000000, 461000000, 462000000, 463000000, 464000000, 465000000,
+ 466000000, 467000000, 468000000, 469000000, 486000000, 487000000, 864000000,
+ 865000000, 888000000, 889000000, 470000000, 471000000, 472000000, 473000000,
+ 474000000, 475000000, 476000000, 477000000, 478000000, 479000000, 496000000,
+ 497000000, 874000000, 875000000, 898000000, 899000000, 500000000, 501000000,
+ 502000000, 503000000, 504000000, 505000000, 506000000, 507000000, 508000000,
+ 509000000, 580000000, 581000000, 904000000, 905000000, 984000000, 985000000,
+ 510000000, 511000000, 512000000, 513000000, 514000000, 515000000, 516000000,
+ 517000000, 518000000, 519000000, 590000000, 591000000, 914000000, 915000000,
+ 994000000, 995000000, 520000000, 521000000, 522000000, 523000000, 524000000,
+ 525000000, 526000000, 527000000, 528000000, 529000000, 582000000, 583000000,
+ 924000000, 925000000, 948000000, 949000000, 530000000, 531000000, 532000000,
+ 533000000, 534000000, 535000000, 536000000, 537000000, 538000000, 539000000,
+ 592000000, 593000000, 934000000, 935000000, 958000000, 959000000, 540000000,
+ 541000000, 542000000, 543000000, 544000000, 545000000, 546000000, 547000000,
+ 548000000, 549000000, 584000000, 585000000, 944000000, 945000000, 588000000,
+ 589000000, 550000000, 551000000, 552000000, 553000000, 554000000, 555000000,
+ 556000000, 557000000, 558000000, 559000000, 594000000, 595000000, 954000000,
+ 955000000, 598000000, 599000000, 560000000, 561000000, 562000000, 563000000,
+ 564000000, 565000000, 566000000, 567000000, 568000000, 569000000, 586000000,
+ 587000000, 964000000, 965000000, 988000000, 989000000, 570000000, 571000000,
+ 572000000, 573000000, 574000000, 575000000, 576000000, 577000000, 578000000,
+ 579000000, 596000000, 597000000, 974000000, 975000000, 998000000, 999000000,
+ 600000000, 601000000, 602000000, 603000000, 604000000, 605000000, 606000000,
+ 607000000, 608000000, 609000000, 680000000, 681000000, 806000000, 807000000,
+ 886000000, 887000000, 610000000, 611000000, 612000000, 613000000, 614000000,
+ 615000000, 616000000, 617000000, 618000000, 619000000, 690000000, 691000000,
+ 816000000, 817000000, 896000000, 897000000, 620000000, 621000000, 622000000,
+ 623000000, 624000000, 625000000, 626000000, 627000000, 628000000, 629000000,
+ 682000000, 683000000, 826000000, 827000000, 868000000, 869000000, 630000000,
+ 631000000, 632000000, 633000000, 634000000, 635000000, 636000000, 637000000,
+ 638000000, 639000000, 692000000, 693000000, 836000000, 837000000, 878000000,
+ 879000000, 640000000, 641000000, 642000000, 643000000, 644000000, 645000000,
+ 646000000, 647000000, 648000000, 649000000, 684000000, 685000000, 846000000,
+ 847000000, 688000000, 689000000, 650000000, 651000000, 652000000, 653000000,
+ 654000000, 655000000, 656000000, 657000000, 658000000, 659000000, 694000000,
+ 695000000, 856000000, 857000000, 698000000, 699000000, 660000000, 661000000,
+ 662000000, 663000000, 664000000, 665000000, 666000000, 667000000, 668000000,
+ 669000000, 686000000, 687000000, 866000000, 867000000, 888000000, 889000000,
+ 670000000, 671000000, 672000000, 673000000, 674000000, 675000000, 676000000,
+ 677000000, 678000000, 679000000, 696000000, 697000000, 876000000, 877000000,
+ 898000000, 899000000, 700000000, 701000000, 702000000, 703000000, 704000000,
+ 705000000, 706000000, 707000000, 708000000, 709000000, 780000000, 781000000,
+ 906000000, 907000000, 986000000, 987000000, 710000000, 711000000, 712000000,
+ 713000000, 714000000, 715000000, 716000000, 717000000, 718000000, 719000000,
+ 790000000, 791000000, 916000000, 917000000, 996000000, 997000000, 720000000,
+ 721000000, 722000000, 723000000, 724000000, 725000000, 726000000, 727000000,
+ 728000000, 729000000, 782000000, 783000000, 926000000, 927000000, 968000000,
+ 969000000, 730000000, 731000000, 732000000, 733000000, 734000000, 735000000,
+ 736000000, 737000000, 738000000, 739000000, 792000000, 793000000, 936000000,
+ 937000000, 978000000, 979000000, 740000000, 741000000, 742000000, 743000000,
+ 744000000, 745000000, 746000000, 747000000, 748000000, 749000000, 784000000,
+ 785000000, 946000000, 947000000, 788000000, 789000000, 750000000, 751000000,
+ 752000000, 753000000, 754000000, 755000000, 756000000, 757000000, 758000000,
+ 759000000, 794000000, 795000000, 956000000, 957000000, 798000000, 799000000,
+ 760000000, 761000000, 762000000, 763000000, 764000000, 765000000, 766000000,
+ 767000000, 768000000, 769000000, 786000000, 787000000, 966000000, 967000000,
+ 988000000, 989000000, 770000000, 771000000, 772000000, 773000000, 774000000,
+ 775000000, 776000000, 777000000, 778000000, 779000000, 796000000, 797000000,
+ 976000000, 977000000, 998000000, 999000000};
+#endif
+
+#if defined(DEC_BIN2CHAR) && DEC_BIN2CHAR==1 && !defined(DECBIN2CHAR)
+#define DECBIN2CHAR
+
+const uint8_t BIN2CHAR[4001]={
+ '\0','0','0','0', '\1','0','0','1', '\1','0','0','2', '\1','0','0','3', '\1','0','0','4',
+ '\1','0','0','5', '\1','0','0','6', '\1','0','0','7', '\1','0','0','8', '\1','0','0','9',
+ '\2','0','1','0', '\2','0','1','1', '\2','0','1','2', '\2','0','1','3', '\2','0','1','4',
+ '\2','0','1','5', '\2','0','1','6', '\2','0','1','7', '\2','0','1','8', '\2','0','1','9',
+ '\2','0','2','0', '\2','0','2','1', '\2','0','2','2', '\2','0','2','3', '\2','0','2','4',
+ '\2','0','2','5', '\2','0','2','6', '\2','0','2','7', '\2','0','2','8', '\2','0','2','9',
+ '\2','0','3','0', '\2','0','3','1', '\2','0','3','2', '\2','0','3','3', '\2','0','3','4',
+ '\2','0','3','5', '\2','0','3','6', '\2','0','3','7', '\2','0','3','8', '\2','0','3','9',
+ '\2','0','4','0', '\2','0','4','1', '\2','0','4','2', '\2','0','4','3', '\2','0','4','4',
+ '\2','0','4','5', '\2','0','4','6', '\2','0','4','7', '\2','0','4','8', '\2','0','4','9',
+ '\2','0','5','0', '\2','0','5','1', '\2','0','5','2', '\2','0','5','3', '\2','0','5','4',
+ '\2','0','5','5', '\2','0','5','6', '\2','0','5','7', '\2','0','5','8', '\2','0','5','9',
+ '\2','0','6','0', '\2','0','6','1', '\2','0','6','2', '\2','0','6','3', '\2','0','6','4',
+ '\2','0','6','5', '\2','0','6','6', '\2','0','6','7', '\2','0','6','8', '\2','0','6','9',
+ '\2','0','7','0', '\2','0','7','1', '\2','0','7','2', '\2','0','7','3', '\2','0','7','4',
+ '\2','0','7','5', '\2','0','7','6', '\2','0','7','7', '\2','0','7','8', '\2','0','7','9',
+ '\2','0','8','0', '\2','0','8','1', '\2','0','8','2', '\2','0','8','3', '\2','0','8','4',
+ '\2','0','8','5', '\2','0','8','6', '\2','0','8','7', '\2','0','8','8', '\2','0','8','9',
+ '\2','0','9','0', '\2','0','9','1', '\2','0','9','2', '\2','0','9','3', '\2','0','9','4',
+ '\2','0','9','5', '\2','0','9','6', '\2','0','9','7', '\2','0','9','8', '\2','0','9','9',
+ '\3','1','0','0', '\3','1','0','1', '\3','1','0','2', '\3','1','0','3', '\3','1','0','4',
+ '\3','1','0','5', '\3','1','0','6', '\3','1','0','7', '\3','1','0','8', '\3','1','0','9',
+ '\3','1','1','0', '\3','1','1','1', '\3','1','1','2', '\3','1','1','3', '\3','1','1','4',
+ '\3','1','1','5', '\3','1','1','6', '\3','1','1','7', '\3','1','1','8', '\3','1','1','9',
+ '\3','1','2','0', '\3','1','2','1', '\3','1','2','2', '\3','1','2','3', '\3','1','2','4',
+ '\3','1','2','5', '\3','1','2','6', '\3','1','2','7', '\3','1','2','8', '\3','1','2','9',
+ '\3','1','3','0', '\3','1','3','1', '\3','1','3','2', '\3','1','3','3', '\3','1','3','4',
+ '\3','1','3','5', '\3','1','3','6', '\3','1','3','7', '\3','1','3','8', '\3','1','3','9',
+ '\3','1','4','0', '\3','1','4','1', '\3','1','4','2', '\3','1','4','3', '\3','1','4','4',
+ '\3','1','4','5', '\3','1','4','6', '\3','1','4','7', '\3','1','4','8', '\3','1','4','9',
+ '\3','1','5','0', '\3','1','5','1', '\3','1','5','2', '\3','1','5','3', '\3','1','5','4',
+ '\3','1','5','5', '\3','1','5','6', '\3','1','5','7', '\3','1','5','8', '\3','1','5','9',
+ '\3','1','6','0', '\3','1','6','1', '\3','1','6','2', '\3','1','6','3', '\3','1','6','4',
+ '\3','1','6','5', '\3','1','6','6', '\3','1','6','7', '\3','1','6','8', '\3','1','6','9',
+ '\3','1','7','0', '\3','1','7','1', '\3','1','7','2', '\3','1','7','3', '\3','1','7','4',
+ '\3','1','7','5', '\3','1','7','6', '\3','1','7','7', '\3','1','7','8', '\3','1','7','9',
+ '\3','1','8','0', '\3','1','8','1', '\3','1','8','2', '\3','1','8','3', '\3','1','8','4',
+ '\3','1','8','5', '\3','1','8','6', '\3','1','8','7', '\3','1','8','8', '\3','1','8','9',
+ '\3','1','9','0', '\3','1','9','1', '\3','1','9','2', '\3','1','9','3', '\3','1','9','4',
+ '\3','1','9','5', '\3','1','9','6', '\3','1','9','7', '\3','1','9','8', '\3','1','9','9',
+ '\3','2','0','0', '\3','2','0','1', '\3','2','0','2', '\3','2','0','3', '\3','2','0','4',
+ '\3','2','0','5', '\3','2','0','6', '\3','2','0','7', '\3','2','0','8', '\3','2','0','9',
+ '\3','2','1','0', '\3','2','1','1', '\3','2','1','2', '\3','2','1','3', '\3','2','1','4',
+ '\3','2','1','5', '\3','2','1','6', '\3','2','1','7', '\3','2','1','8', '\3','2','1','9',
+ '\3','2','2','0', '\3','2','2','1', '\3','2','2','2', '\3','2','2','3', '\3','2','2','4',
+ '\3','2','2','5', '\3','2','2','6', '\3','2','2','7', '\3','2','2','8', '\3','2','2','9',
+ '\3','2','3','0', '\3','2','3','1', '\3','2','3','2', '\3','2','3','3', '\3','2','3','4',
+ '\3','2','3','5', '\3','2','3','6', '\3','2','3','7', '\3','2','3','8', '\3','2','3','9',
+ '\3','2','4','0', '\3','2','4','1', '\3','2','4','2', '\3','2','4','3', '\3','2','4','4',
+ '\3','2','4','5', '\3','2','4','6', '\3','2','4','7', '\3','2','4','8', '\3','2','4','9',
+ '\3','2','5','0', '\3','2','5','1', '\3','2','5','2', '\3','2','5','3', '\3','2','5','4',
+ '\3','2','5','5', '\3','2','5','6', '\3','2','5','7', '\3','2','5','8', '\3','2','5','9',
+ '\3','2','6','0', '\3','2','6','1', '\3','2','6','2', '\3','2','6','3', '\3','2','6','4',
+ '\3','2','6','5', '\3','2','6','6', '\3','2','6','7', '\3','2','6','8', '\3','2','6','9',
+ '\3','2','7','0', '\3','2','7','1', '\3','2','7','2', '\3','2','7','3', '\3','2','7','4',
+ '\3','2','7','5', '\3','2','7','6', '\3','2','7','7', '\3','2','7','8', '\3','2','7','9',
+ '\3','2','8','0', '\3','2','8','1', '\3','2','8','2', '\3','2','8','3', '\3','2','8','4',
+ '\3','2','8','5', '\3','2','8','6', '\3','2','8','7', '\3','2','8','8', '\3','2','8','9',
+ '\3','2','9','0', '\3','2','9','1', '\3','2','9','2', '\3','2','9','3', '\3','2','9','4',
+ '\3','2','9','5', '\3','2','9','6', '\3','2','9','7', '\3','2','9','8', '\3','2','9','9',
+ '\3','3','0','0', '\3','3','0','1', '\3','3','0','2', '\3','3','0','3', '\3','3','0','4',
+ '\3','3','0','5', '\3','3','0','6', '\3','3','0','7', '\3','3','0','8', '\3','3','0','9',
+ '\3','3','1','0', '\3','3','1','1', '\3','3','1','2', '\3','3','1','3', '\3','3','1','4',
+ '\3','3','1','5', '\3','3','1','6', '\3','3','1','7', '\3','3','1','8', '\3','3','1','9',
+ '\3','3','2','0', '\3','3','2','1', '\3','3','2','2', '\3','3','2','3', '\3','3','2','4',
+ '\3','3','2','5', '\3','3','2','6', '\3','3','2','7', '\3','3','2','8', '\3','3','2','9',
+ '\3','3','3','0', '\3','3','3','1', '\3','3','3','2', '\3','3','3','3', '\3','3','3','4',
+ '\3','3','3','5', '\3','3','3','6', '\3','3','3','7', '\3','3','3','8', '\3','3','3','9',
+ '\3','3','4','0', '\3','3','4','1', '\3','3','4','2', '\3','3','4','3', '\3','3','4','4',
+ '\3','3','4','5', '\3','3','4','6', '\3','3','4','7', '\3','3','4','8', '\3','3','4','9',
+ '\3','3','5','0', '\3','3','5','1', '\3','3','5','2', '\3','3','5','3', '\3','3','5','4',
+ '\3','3','5','5', '\3','3','5','6', '\3','3','5','7', '\3','3','5','8', '\3','3','5','9',
+ '\3','3','6','0', '\3','3','6','1', '\3','3','6','2', '\3','3','6','3', '\3','3','6','4',
+ '\3','3','6','5', '\3','3','6','6', '\3','3','6','7', '\3','3','6','8', '\3','3','6','9',
+ '\3','3','7','0', '\3','3','7','1', '\3','3','7','2', '\3','3','7','3', '\3','3','7','4',
+ '\3','3','7','5', '\3','3','7','6', '\3','3','7','7', '\3','3','7','8', '\3','3','7','9',
+ '\3','3','8','0', '\3','3','8','1', '\3','3','8','2', '\3','3','8','3', '\3','3','8','4',
+ '\3','3','8','5', '\3','3','8','6', '\3','3','8','7', '\3','3','8','8', '\3','3','8','9',
+ '\3','3','9','0', '\3','3','9','1', '\3','3','9','2', '\3','3','9','3', '\3','3','9','4',
+ '\3','3','9','5', '\3','3','9','6', '\3','3','9','7', '\3','3','9','8', '\3','3','9','9',
+ '\3','4','0','0', '\3','4','0','1', '\3','4','0','2', '\3','4','0','3', '\3','4','0','4',
+ '\3','4','0','5', '\3','4','0','6', '\3','4','0','7', '\3','4','0','8', '\3','4','0','9',
+ '\3','4','1','0', '\3','4','1','1', '\3','4','1','2', '\3','4','1','3', '\3','4','1','4',
+ '\3','4','1','5', '\3','4','1','6', '\3','4','1','7', '\3','4','1','8', '\3','4','1','9',
+ '\3','4','2','0', '\3','4','2','1', '\3','4','2','2', '\3','4','2','3', '\3','4','2','4',
+ '\3','4','2','5', '\3','4','2','6', '\3','4','2','7', '\3','4','2','8', '\3','4','2','9',
+ '\3','4','3','0', '\3','4','3','1', '\3','4','3','2', '\3','4','3','3', '\3','4','3','4',
+ '\3','4','3','5', '\3','4','3','6', '\3','4','3','7', '\3','4','3','8', '\3','4','3','9',
+ '\3','4','4','0', '\3','4','4','1', '\3','4','4','2', '\3','4','4','3', '\3','4','4','4',
+ '\3','4','4','5', '\3','4','4','6', '\3','4','4','7', '\3','4','4','8', '\3','4','4','9',
+ '\3','4','5','0', '\3','4','5','1', '\3','4','5','2', '\3','4','5','3', '\3','4','5','4',
+ '\3','4','5','5', '\3','4','5','6', '\3','4','5','7', '\3','4','5','8', '\3','4','5','9',
+ '\3','4','6','0', '\3','4','6','1', '\3','4','6','2', '\3','4','6','3', '\3','4','6','4',
+ '\3','4','6','5', '\3','4','6','6', '\3','4','6','7', '\3','4','6','8', '\3','4','6','9',
+ '\3','4','7','0', '\3','4','7','1', '\3','4','7','2', '\3','4','7','3', '\3','4','7','4',
+ '\3','4','7','5', '\3','4','7','6', '\3','4','7','7', '\3','4','7','8', '\3','4','7','9',
+ '\3','4','8','0', '\3','4','8','1', '\3','4','8','2', '\3','4','8','3', '\3','4','8','4',
+ '\3','4','8','5', '\3','4','8','6', '\3','4','8','7', '\3','4','8','8', '\3','4','8','9',
+ '\3','4','9','0', '\3','4','9','1', '\3','4','9','2', '\3','4','9','3', '\3','4','9','4',
+ '\3','4','9','5', '\3','4','9','6', '\3','4','9','7', '\3','4','9','8', '\3','4','9','9',
+ '\3','5','0','0', '\3','5','0','1', '\3','5','0','2', '\3','5','0','3', '\3','5','0','4',
+ '\3','5','0','5', '\3','5','0','6', '\3','5','0','7', '\3','5','0','8', '\3','5','0','9',
+ '\3','5','1','0', '\3','5','1','1', '\3','5','1','2', '\3','5','1','3', '\3','5','1','4',
+ '\3','5','1','5', '\3','5','1','6', '\3','5','1','7', '\3','5','1','8', '\3','5','1','9',
+ '\3','5','2','0', '\3','5','2','1', '\3','5','2','2', '\3','5','2','3', '\3','5','2','4',
+ '\3','5','2','5', '\3','5','2','6', '\3','5','2','7', '\3','5','2','8', '\3','5','2','9',
+ '\3','5','3','0', '\3','5','3','1', '\3','5','3','2', '\3','5','3','3', '\3','5','3','4',
+ '\3','5','3','5', '\3','5','3','6', '\3','5','3','7', '\3','5','3','8', '\3','5','3','9',
+ '\3','5','4','0', '\3','5','4','1', '\3','5','4','2', '\3','5','4','3', '\3','5','4','4',
+ '\3','5','4','5', '\3','5','4','6', '\3','5','4','7', '\3','5','4','8', '\3','5','4','9',
+ '\3','5','5','0', '\3','5','5','1', '\3','5','5','2', '\3','5','5','3', '\3','5','5','4',
+ '\3','5','5','5', '\3','5','5','6', '\3','5','5','7', '\3','5','5','8', '\3','5','5','9',
+ '\3','5','6','0', '\3','5','6','1', '\3','5','6','2', '\3','5','6','3', '\3','5','6','4',
+ '\3','5','6','5', '\3','5','6','6', '\3','5','6','7', '\3','5','6','8', '\3','5','6','9',
+ '\3','5','7','0', '\3','5','7','1', '\3','5','7','2', '\3','5','7','3', '\3','5','7','4',
+ '\3','5','7','5', '\3','5','7','6', '\3','5','7','7', '\3','5','7','8', '\3','5','7','9',
+ '\3','5','8','0', '\3','5','8','1', '\3','5','8','2', '\3','5','8','3', '\3','5','8','4',
+ '\3','5','8','5', '\3','5','8','6', '\3','5','8','7', '\3','5','8','8', '\3','5','8','9',
+ '\3','5','9','0', '\3','5','9','1', '\3','5','9','2', '\3','5','9','3', '\3','5','9','4',
+ '\3','5','9','5', '\3','5','9','6', '\3','5','9','7', '\3','5','9','8', '\3','5','9','9',
+ '\3','6','0','0', '\3','6','0','1', '\3','6','0','2', '\3','6','0','3', '\3','6','0','4',
+ '\3','6','0','5', '\3','6','0','6', '\3','6','0','7', '\3','6','0','8', '\3','6','0','9',
+ '\3','6','1','0', '\3','6','1','1', '\3','6','1','2', '\3','6','1','3', '\3','6','1','4',
+ '\3','6','1','5', '\3','6','1','6', '\3','6','1','7', '\3','6','1','8', '\3','6','1','9',
+ '\3','6','2','0', '\3','6','2','1', '\3','6','2','2', '\3','6','2','3', '\3','6','2','4',
+ '\3','6','2','5', '\3','6','2','6', '\3','6','2','7', '\3','6','2','8', '\3','6','2','9',
+ '\3','6','3','0', '\3','6','3','1', '\3','6','3','2', '\3','6','3','3', '\3','6','3','4',
+ '\3','6','3','5', '\3','6','3','6', '\3','6','3','7', '\3','6','3','8', '\3','6','3','9',
+ '\3','6','4','0', '\3','6','4','1', '\3','6','4','2', '\3','6','4','3', '\3','6','4','4',
+ '\3','6','4','5', '\3','6','4','6', '\3','6','4','7', '\3','6','4','8', '\3','6','4','9',
+ '\3','6','5','0', '\3','6','5','1', '\3','6','5','2', '\3','6','5','3', '\3','6','5','4',
+ '\3','6','5','5', '\3','6','5','6', '\3','6','5','7', '\3','6','5','8', '\3','6','5','9',
+ '\3','6','6','0', '\3','6','6','1', '\3','6','6','2', '\3','6','6','3', '\3','6','6','4',
+ '\3','6','6','5', '\3','6','6','6', '\3','6','6','7', '\3','6','6','8', '\3','6','6','9',
+ '\3','6','7','0', '\3','6','7','1', '\3','6','7','2', '\3','6','7','3', '\3','6','7','4',
+ '\3','6','7','5', '\3','6','7','6', '\3','6','7','7', '\3','6','7','8', '\3','6','7','9',
+ '\3','6','8','0', '\3','6','8','1', '\3','6','8','2', '\3','6','8','3', '\3','6','8','4',
+ '\3','6','8','5', '\3','6','8','6', '\3','6','8','7', '\3','6','8','8', '\3','6','8','9',
+ '\3','6','9','0', '\3','6','9','1', '\3','6','9','2', '\3','6','9','3', '\3','6','9','4',
+ '\3','6','9','5', '\3','6','9','6', '\3','6','9','7', '\3','6','9','8', '\3','6','9','9',
+ '\3','7','0','0', '\3','7','0','1', '\3','7','0','2', '\3','7','0','3', '\3','7','0','4',
+ '\3','7','0','5', '\3','7','0','6', '\3','7','0','7', '\3','7','0','8', '\3','7','0','9',
+ '\3','7','1','0', '\3','7','1','1', '\3','7','1','2', '\3','7','1','3', '\3','7','1','4',
+ '\3','7','1','5', '\3','7','1','6', '\3','7','1','7', '\3','7','1','8', '\3','7','1','9',
+ '\3','7','2','0', '\3','7','2','1', '\3','7','2','2', '\3','7','2','3', '\3','7','2','4',
+ '\3','7','2','5', '\3','7','2','6', '\3','7','2','7', '\3','7','2','8', '\3','7','2','9',
+ '\3','7','3','0', '\3','7','3','1', '\3','7','3','2', '\3','7','3','3', '\3','7','3','4',
+ '\3','7','3','5', '\3','7','3','6', '\3','7','3','7', '\3','7','3','8', '\3','7','3','9',
+ '\3','7','4','0', '\3','7','4','1', '\3','7','4','2', '\3','7','4','3', '\3','7','4','4',
+ '\3','7','4','5', '\3','7','4','6', '\3','7','4','7', '\3','7','4','8', '\3','7','4','9',
+ '\3','7','5','0', '\3','7','5','1', '\3','7','5','2', '\3','7','5','3', '\3','7','5','4',
+ '\3','7','5','5', '\3','7','5','6', '\3','7','5','7', '\3','7','5','8', '\3','7','5','9',
+ '\3','7','6','0', '\3','7','6','1', '\3','7','6','2', '\3','7','6','3', '\3','7','6','4',
+ '\3','7','6','5', '\3','7','6','6', '\3','7','6','7', '\3','7','6','8', '\3','7','6','9',
+ '\3','7','7','0', '\3','7','7','1', '\3','7','7','2', '\3','7','7','3', '\3','7','7','4',
+ '\3','7','7','5', '\3','7','7','6', '\3','7','7','7', '\3','7','7','8', '\3','7','7','9',
+ '\3','7','8','0', '\3','7','8','1', '\3','7','8','2', '\3','7','8','3', '\3','7','8','4',
+ '\3','7','8','5', '\3','7','8','6', '\3','7','8','7', '\3','7','8','8', '\3','7','8','9',
+ '\3','7','9','0', '\3','7','9','1', '\3','7','9','2', '\3','7','9','3', '\3','7','9','4',
+ '\3','7','9','5', '\3','7','9','6', '\3','7','9','7', '\3','7','9','8', '\3','7','9','9',
+ '\3','8','0','0', '\3','8','0','1', '\3','8','0','2', '\3','8','0','3', '\3','8','0','4',
+ '\3','8','0','5', '\3','8','0','6', '\3','8','0','7', '\3','8','0','8', '\3','8','0','9',
+ '\3','8','1','0', '\3','8','1','1', '\3','8','1','2', '\3','8','1','3', '\3','8','1','4',
+ '\3','8','1','5', '\3','8','1','6', '\3','8','1','7', '\3','8','1','8', '\3','8','1','9',
+ '\3','8','2','0', '\3','8','2','1', '\3','8','2','2', '\3','8','2','3', '\3','8','2','4',
+ '\3','8','2','5', '\3','8','2','6', '\3','8','2','7', '\3','8','2','8', '\3','8','2','9',
+ '\3','8','3','0', '\3','8','3','1', '\3','8','3','2', '\3','8','3','3', '\3','8','3','4',
+ '\3','8','3','5', '\3','8','3','6', '\3','8','3','7', '\3','8','3','8', '\3','8','3','9',
+ '\3','8','4','0', '\3','8','4','1', '\3','8','4','2', '\3','8','4','3', '\3','8','4','4',
+ '\3','8','4','5', '\3','8','4','6', '\3','8','4','7', '\3','8','4','8', '\3','8','4','9',
+ '\3','8','5','0', '\3','8','5','1', '\3','8','5','2', '\3','8','5','3', '\3','8','5','4',
+ '\3','8','5','5', '\3','8','5','6', '\3','8','5','7', '\3','8','5','8', '\3','8','5','9',
+ '\3','8','6','0', '\3','8','6','1', '\3','8','6','2', '\3','8','6','3', '\3','8','6','4',
+ '\3','8','6','5', '\3','8','6','6', '\3','8','6','7', '\3','8','6','8', '\3','8','6','9',
+ '\3','8','7','0', '\3','8','7','1', '\3','8','7','2', '\3','8','7','3', '\3','8','7','4',
+ '\3','8','7','5', '\3','8','7','6', '\3','8','7','7', '\3','8','7','8', '\3','8','7','9',
+ '\3','8','8','0', '\3','8','8','1', '\3','8','8','2', '\3','8','8','3', '\3','8','8','4',
+ '\3','8','8','5', '\3','8','8','6', '\3','8','8','7', '\3','8','8','8', '\3','8','8','9',
+ '\3','8','9','0', '\3','8','9','1', '\3','8','9','2', '\3','8','9','3', '\3','8','9','4',
+ '\3','8','9','5', '\3','8','9','6', '\3','8','9','7', '\3','8','9','8', '\3','8','9','9',
+ '\3','9','0','0', '\3','9','0','1', '\3','9','0','2', '\3','9','0','3', '\3','9','0','4',
+ '\3','9','0','5', '\3','9','0','6', '\3','9','0','7', '\3','9','0','8', '\3','9','0','9',
+ '\3','9','1','0', '\3','9','1','1', '\3','9','1','2', '\3','9','1','3', '\3','9','1','4',
+ '\3','9','1','5', '\3','9','1','6', '\3','9','1','7', '\3','9','1','8', '\3','9','1','9',
+ '\3','9','2','0', '\3','9','2','1', '\3','9','2','2', '\3','9','2','3', '\3','9','2','4',
+ '\3','9','2','5', '\3','9','2','6', '\3','9','2','7', '\3','9','2','8', '\3','9','2','9',
+ '\3','9','3','0', '\3','9','3','1', '\3','9','3','2', '\3','9','3','3', '\3','9','3','4',
+ '\3','9','3','5', '\3','9','3','6', '\3','9','3','7', '\3','9','3','8', '\3','9','3','9',
+ '\3','9','4','0', '\3','9','4','1', '\3','9','4','2', '\3','9','4','3', '\3','9','4','4',
+ '\3','9','4','5', '\3','9','4','6', '\3','9','4','7', '\3','9','4','8', '\3','9','4','9',
+ '\3','9','5','0', '\3','9','5','1', '\3','9','5','2', '\3','9','5','3', '\3','9','5','4',
+ '\3','9','5','5', '\3','9','5','6', '\3','9','5','7', '\3','9','5','8', '\3','9','5','9',
+ '\3','9','6','0', '\3','9','6','1', '\3','9','6','2', '\3','9','6','3', '\3','9','6','4',
+ '\3','9','6','5', '\3','9','6','6', '\3','9','6','7', '\3','9','6','8', '\3','9','6','9',
+ '\3','9','7','0', '\3','9','7','1', '\3','9','7','2', '\3','9','7','3', '\3','9','7','4',
+ '\3','9','7','5', '\3','9','7','6', '\3','9','7','7', '\3','9','7','8', '\3','9','7','9',
+ '\3','9','8','0', '\3','9','8','1', '\3','9','8','2', '\3','9','8','3', '\3','9','8','4',
+ '\3','9','8','5', '\3','9','8','6', '\3','9','8','7', '\3','9','8','8', '\3','9','8','9',
+ '\3','9','9','0', '\3','9','9','1', '\3','9','9','2', '\3','9','9','3', '\3','9','9','4',
+ '\3','9','9','5', '\3','9','9','6', '\3','9','9','7', '\3','9','9','8', '\3','9','9','9', '\0'};
+#endif
+
+#if defined(DEC_DPD2BCD8) && DEC_DPD2BCD8==1 && !defined(DECDPD2BCD8)
+#define DECDPD2BCD8
+
+const uint8_t DPD2BCD8[4096]={
+ 0,0,0,0, 0,0,1,1, 0,0,2,1, 0,0,3,1, 0,0,4,1, 0,0,5,1, 0,0,6,1, 0,0,7,1, 0,0,8,1,
+ 0,0,9,1, 0,8,0,2, 0,8,1,2, 8,0,0,3, 8,0,1,3, 8,8,0,3, 8,8,1,3, 0,1,0,2, 0,1,1,2,
+ 0,1,2,2, 0,1,3,2, 0,1,4,2, 0,1,5,2, 0,1,6,2, 0,1,7,2, 0,1,8,2, 0,1,9,2, 0,9,0,2,
+ 0,9,1,2, 8,1,0,3, 8,1,1,3, 8,9,0,3, 8,9,1,3, 0,2,0,2, 0,2,1,2, 0,2,2,2, 0,2,3,2,
+ 0,2,4,2, 0,2,5,2, 0,2,6,2, 0,2,7,2, 0,2,8,2, 0,2,9,2, 0,8,2,2, 0,8,3,2, 8,2,0,3,
+ 8,2,1,3, 8,0,8,3, 8,0,9,3, 0,3,0,2, 0,3,1,2, 0,3,2,2, 0,3,3,2, 0,3,4,2, 0,3,5,2,
+ 0,3,6,2, 0,3,7,2, 0,3,8,2, 0,3,9,2, 0,9,2,2, 0,9,3,2, 8,3,0,3, 8,3,1,3, 8,1,8,3,
+ 8,1,9,3, 0,4,0,2, 0,4,1,2, 0,4,2,2, 0,4,3,2, 0,4,4,2, 0,4,5,2, 0,4,6,2, 0,4,7,2,
+ 0,4,8,2, 0,4,9,2, 0,8,4,2, 0,8,5,2, 8,4,0,3, 8,4,1,3, 0,8,8,2, 0,8,9,2, 0,5,0,2,
+ 0,5,1,2, 0,5,2,2, 0,5,3,2, 0,5,4,2, 0,5,5,2, 0,5,6,2, 0,5,7,2, 0,5,8,2, 0,5,9,2,
+ 0,9,4,2, 0,9,5,2, 8,5,0,3, 8,5,1,3, 0,9,8,2, 0,9,9,2, 0,6,0,2, 0,6,1,2, 0,6,2,2,
+ 0,6,3,2, 0,6,4,2, 0,6,5,2, 0,6,6,2, 0,6,7,2, 0,6,8,2, 0,6,9,2, 0,8,6,2, 0,8,7,2,
+ 8,6,0,3, 8,6,1,3, 8,8,8,3, 8,8,9,3, 0,7,0,2, 0,7,1,2, 0,7,2,2, 0,7,3,2, 0,7,4,2,
+ 0,7,5,2, 0,7,6,2, 0,7,7,2, 0,7,8,2, 0,7,9,2, 0,9,6,2, 0,9,7,2, 8,7,0,3, 8,7,1,3,
+ 8,9,8,3, 8,9,9,3, 1,0,0,3, 1,0,1,3, 1,0,2,3, 1,0,3,3, 1,0,4,3, 1,0,5,3, 1,0,6,3,
+ 1,0,7,3, 1,0,8,3, 1,0,9,3, 1,8,0,3, 1,8,1,3, 9,0,0,3, 9,0,1,3, 9,8,0,3, 9,8,1,3,
+ 1,1,0,3, 1,1,1,3, 1,1,2,3, 1,1,3,3, 1,1,4,3, 1,1,5,3, 1,1,6,3, 1,1,7,3, 1,1,8,3,
+ 1,1,9,3, 1,9,0,3, 1,9,1,3, 9,1,0,3, 9,1,1,3, 9,9,0,3, 9,9,1,3, 1,2,0,3, 1,2,1,3,
+ 1,2,2,3, 1,2,3,3, 1,2,4,3, 1,2,5,3, 1,2,6,3, 1,2,7,3, 1,2,8,3, 1,2,9,3, 1,8,2,3,
+ 1,8,3,3, 9,2,0,3, 9,2,1,3, 9,0,8,3, 9,0,9,3, 1,3,0,3, 1,3,1,3, 1,3,2,3, 1,3,3,3,
+ 1,3,4,3, 1,3,5,3, 1,3,6,3, 1,3,7,3, 1,3,8,3, 1,3,9,3, 1,9,2,3, 1,9,3,3, 9,3,0,3,
+ 9,3,1,3, 9,1,8,3, 9,1,9,3, 1,4,0,3, 1,4,1,3, 1,4,2,3, 1,4,3,3, 1,4,4,3, 1,4,5,3,
+ 1,4,6,3, 1,4,7,3, 1,4,8,3, 1,4,9,3, 1,8,4,3, 1,8,5,3, 9,4,0,3, 9,4,1,3, 1,8,8,3,
+ 1,8,9,3, 1,5,0,3, 1,5,1,3, 1,5,2,3, 1,5,3,3, 1,5,4,3, 1,5,5,3, 1,5,6,3, 1,5,7,3,
+ 1,5,8,3, 1,5,9,3, 1,9,4,3, 1,9,5,3, 9,5,0,3, 9,5,1,3, 1,9,8,3, 1,9,9,3, 1,6,0,3,
+ 1,6,1,3, 1,6,2,3, 1,6,3,3, 1,6,4,3, 1,6,5,3, 1,6,6,3, 1,6,7,3, 1,6,8,3, 1,6,9,3,
+ 1,8,6,3, 1,8,7,3, 9,6,0,3, 9,6,1,3, 9,8,8,3, 9,8,9,3, 1,7,0,3, 1,7,1,3, 1,7,2,3,
+ 1,7,3,3, 1,7,4,3, 1,7,5,3, 1,7,6,3, 1,7,7,3, 1,7,8,3, 1,7,9,3, 1,9,6,3, 1,9,7,3,
+ 9,7,0,3, 9,7,1,3, 9,9,8,3, 9,9,9,3, 2,0,0,3, 2,0,1,3, 2,0,2,3, 2,0,3,3, 2,0,4,3,
+ 2,0,5,3, 2,0,6,3, 2,0,7,3, 2,0,8,3, 2,0,9,3, 2,8,0,3, 2,8,1,3, 8,0,2,3, 8,0,3,3,
+ 8,8,2,3, 8,8,3,3, 2,1,0,3, 2,1,1,3, 2,1,2,3, 2,1,3,3, 2,1,4,3, 2,1,5,3, 2,1,6,3,
+ 2,1,7,3, 2,1,8,3, 2,1,9,3, 2,9,0,3, 2,9,1,3, 8,1,2,3, 8,1,3,3, 8,9,2,3, 8,9,3,3,
+ 2,2,0,3, 2,2,1,3, 2,2,2,3, 2,2,3,3, 2,2,4,3, 2,2,5,3, 2,2,6,3, 2,2,7,3, 2,2,8,3,
+ 2,2,9,3, 2,8,2,3, 2,8,3,3, 8,2,2,3, 8,2,3,3, 8,2,8,3, 8,2,9,3, 2,3,0,3, 2,3,1,3,
+ 2,3,2,3, 2,3,3,3, 2,3,4,3, 2,3,5,3, 2,3,6,3, 2,3,7,3, 2,3,8,3, 2,3,9,3, 2,9,2,3,
+ 2,9,3,3, 8,3,2,3, 8,3,3,3, 8,3,8,3, 8,3,9,3, 2,4,0,3, 2,4,1,3, 2,4,2,3, 2,4,3,3,
+ 2,4,4,3, 2,4,5,3, 2,4,6,3, 2,4,7,3, 2,4,8,3, 2,4,9,3, 2,8,4,3, 2,8,5,3, 8,4,2,3,
+ 8,4,3,3, 2,8,8,3, 2,8,9,3, 2,5,0,3, 2,5,1,3, 2,5,2,3, 2,5,3,3, 2,5,4,3, 2,5,5,3,
+ 2,5,6,3, 2,5,7,3, 2,5,8,3, 2,5,9,3, 2,9,4,3, 2,9,5,3, 8,5,2,3, 8,5,3,3, 2,9,8,3,
+ 2,9,9,3, 2,6,0,3, 2,6,1,3, 2,6,2,3, 2,6,3,3, 2,6,4,3, 2,6,5,3, 2,6,6,3, 2,6,7,3,
+ 2,6,8,3, 2,6,9,3, 2,8,6,3, 2,8,7,3, 8,6,2,3, 8,6,3,3, 8,8,8,3, 8,8,9,3, 2,7,0,3,
+ 2,7,1,3, 2,7,2,3, 2,7,3,3, 2,7,4,3, 2,7,5,3, 2,7,6,3, 2,7,7,3, 2,7,8,3, 2,7,9,3,
+ 2,9,6,3, 2,9,7,3, 8,7,2,3, 8,7,3,3, 8,9,8,3, 8,9,9,3, 3,0,0,3, 3,0,1,3, 3,0,2,3,
+ 3,0,3,3, 3,0,4,3, 3,0,5,3, 3,0,6,3, 3,0,7,3, 3,0,8,3, 3,0,9,3, 3,8,0,3, 3,8,1,3,
+ 9,0,2,3, 9,0,3,3, 9,8,2,3, 9,8,3,3, 3,1,0,3, 3,1,1,3, 3,1,2,3, 3,1,3,3, 3,1,4,3,
+ 3,1,5,3, 3,1,6,3, 3,1,7,3, 3,1,8,3, 3,1,9,3, 3,9,0,3, 3,9,1,3, 9,1,2,3, 9,1,3,3,
+ 9,9,2,3, 9,9,3,3, 3,2,0,3, 3,2,1,3, 3,2,2,3, 3,2,3,3, 3,2,4,3, 3,2,5,3, 3,2,6,3,
+ 3,2,7,3, 3,2,8,3, 3,2,9,3, 3,8,2,3, 3,8,3,3, 9,2,2,3, 9,2,3,3, 9,2,8,3, 9,2,9,3,
+ 3,3,0,3, 3,3,1,3, 3,3,2,3, 3,3,3,3, 3,3,4,3, 3,3,5,3, 3,3,6,3, 3,3,7,3, 3,3,8,3,
+ 3,3,9,3, 3,9,2,3, 3,9,3,3, 9,3,2,3, 9,3,3,3, 9,3,8,3, 9,3,9,3, 3,4,0,3, 3,4,1,3,
+ 3,4,2,3, 3,4,3,3, 3,4,4,3, 3,4,5,3, 3,4,6,3, 3,4,7,3, 3,4,8,3, 3,4,9,3, 3,8,4,3,
+ 3,8,5,3, 9,4,2,3, 9,4,3,3, 3,8,8,3, 3,8,9,3, 3,5,0,3, 3,5,1,3, 3,5,2,3, 3,5,3,3,
+ 3,5,4,3, 3,5,5,3, 3,5,6,3, 3,5,7,3, 3,5,8,3, 3,5,9,3, 3,9,4,3, 3,9,5,3, 9,5,2,3,
+ 9,5,3,3, 3,9,8,3, 3,9,9,3, 3,6,0,3, 3,6,1,3, 3,6,2,3, 3,6,3,3, 3,6,4,3, 3,6,5,3,
+ 3,6,6,3, 3,6,7,3, 3,6,8,3, 3,6,9,3, 3,8,6,3, 3,8,7,3, 9,6,2,3, 9,6,3,3, 9,8,8,3,
+ 9,8,9,3, 3,7,0,3, 3,7,1,3, 3,7,2,3, 3,7,3,3, 3,7,4,3, 3,7,5,3, 3,7,6,3, 3,7,7,3,
+ 3,7,8,3, 3,7,9,3, 3,9,6,3, 3,9,7,3, 9,7,2,3, 9,7,3,3, 9,9,8,3, 9,9,9,3, 4,0,0,3,
+ 4,0,1,3, 4,0,2,3, 4,0,3,3, 4,0,4,3, 4,0,5,3, 4,0,6,3, 4,0,7,3, 4,0,8,3, 4,0,9,3,
+ 4,8,0,3, 4,8,1,3, 8,0,4,3, 8,0,5,3, 8,8,4,3, 8,8,5,3, 4,1,0,3, 4,1,1,3, 4,1,2,3,
+ 4,1,3,3, 4,1,4,3, 4,1,5,3, 4,1,6,3, 4,1,7,3, 4,1,8,3, 4,1,9,3, 4,9,0,3, 4,9,1,3,
+ 8,1,4,3, 8,1,5,3, 8,9,4,3, 8,9,5,3, 4,2,0,3, 4,2,1,3, 4,2,2,3, 4,2,3,3, 4,2,4,3,
+ 4,2,5,3, 4,2,6,3, 4,2,7,3, 4,2,8,3, 4,2,9,3, 4,8,2,3, 4,8,3,3, 8,2,4,3, 8,2,5,3,
+ 8,4,8,3, 8,4,9,3, 4,3,0,3, 4,3,1,3, 4,3,2,3, 4,3,3,3, 4,3,4,3, 4,3,5,3, 4,3,6,3,
+ 4,3,7,3, 4,3,8,3, 4,3,9,3, 4,9,2,3, 4,9,3,3, 8,3,4,3, 8,3,5,3, 8,5,8,3, 8,5,9,3,
+ 4,4,0,3, 4,4,1,3, 4,4,2,3, 4,4,3,3, 4,4,4,3, 4,4,5,3, 4,4,6,3, 4,4,7,3, 4,4,8,3,
+ 4,4,9,3, 4,8,4,3, 4,8,5,3, 8,4,4,3, 8,4,5,3, 4,8,8,3, 4,8,9,3, 4,5,0,3, 4,5,1,3,
+ 4,5,2,3, 4,5,3,3, 4,5,4,3, 4,5,5,3, 4,5,6,3, 4,5,7,3, 4,5,8,3, 4,5,9,3, 4,9,4,3,
+ 4,9,5,3, 8,5,4,3, 8,5,5,3, 4,9,8,3, 4,9,9,3, 4,6,0,3, 4,6,1,3, 4,6,2,3, 4,6,3,3,
+ 4,6,4,3, 4,6,5,3, 4,6,6,3, 4,6,7,3, 4,6,8,3, 4,6,9,3, 4,8,6,3, 4,8,7,3, 8,6,4,3,
+ 8,6,5,3, 8,8,8,3, 8,8,9,3, 4,7,0,3, 4,7,1,3, 4,7,2,3, 4,7,3,3, 4,7,4,3, 4,7,5,3,
+ 4,7,6,3, 4,7,7,3, 4,7,8,3, 4,7,9,3, 4,9,6,3, 4,9,7,3, 8,7,4,3, 8,7,5,3, 8,9,8,3,
+ 8,9,9,3, 5,0,0,3, 5,0,1,3, 5,0,2,3, 5,0,3,3, 5,0,4,3, 5,0,5,3, 5,0,6,3, 5,0,7,3,
+ 5,0,8,3, 5,0,9,3, 5,8,0,3, 5,8,1,3, 9,0,4,3, 9,0,5,3, 9,8,4,3, 9,8,5,3, 5,1,0,3,
+ 5,1,1,3, 5,1,2,3, 5,1,3,3, 5,1,4,3, 5,1,5,3, 5,1,6,3, 5,1,7,3, 5,1,8,3, 5,1,9,3,
+ 5,9,0,3, 5,9,1,3, 9,1,4,3, 9,1,5,3, 9,9,4,3, 9,9,5,3, 5,2,0,3, 5,2,1,3, 5,2,2,3,
+ 5,2,3,3, 5,2,4,3, 5,2,5,3, 5,2,6,3, 5,2,7,3, 5,2,8,3, 5,2,9,3, 5,8,2,3, 5,8,3,3,
+ 9,2,4,3, 9,2,5,3, 9,4,8,3, 9,4,9,3, 5,3,0,3, 5,3,1,3, 5,3,2,3, 5,3,3,3, 5,3,4,3,
+ 5,3,5,3, 5,3,6,3, 5,3,7,3, 5,3,8,3, 5,3,9,3, 5,9,2,3, 5,9,3,3, 9,3,4,3, 9,3,5,3,
+ 9,5,8,3, 9,5,9,3, 5,4,0,3, 5,4,1,3, 5,4,2,3, 5,4,3,3, 5,4,4,3, 5,4,5,3, 5,4,6,3,
+ 5,4,7,3, 5,4,8,3, 5,4,9,3, 5,8,4,3, 5,8,5,3, 9,4,4,3, 9,4,5,3, 5,8,8,3, 5,8,9,3,
+ 5,5,0,3, 5,5,1,3, 5,5,2,3, 5,5,3,3, 5,5,4,3, 5,5,5,3, 5,5,6,3, 5,5,7,3, 5,5,8,3,
+ 5,5,9,3, 5,9,4,3, 5,9,5,3, 9,5,4,3, 9,5,5,3, 5,9,8,3, 5,9,9,3, 5,6,0,3, 5,6,1,3,
+ 5,6,2,3, 5,6,3,3, 5,6,4,3, 5,6,5,3, 5,6,6,3, 5,6,7,3, 5,6,8,3, 5,6,9,3, 5,8,6,3,
+ 5,8,7,3, 9,6,4,3, 9,6,5,3, 9,8,8,3, 9,8,9,3, 5,7,0,3, 5,7,1,3, 5,7,2,3, 5,7,3,3,
+ 5,7,4,3, 5,7,5,3, 5,7,6,3, 5,7,7,3, 5,7,8,3, 5,7,9,3, 5,9,6,3, 5,9,7,3, 9,7,4,3,
+ 9,7,5,3, 9,9,8,3, 9,9,9,3, 6,0,0,3, 6,0,1,3, 6,0,2,3, 6,0,3,3, 6,0,4,3, 6,0,5,3,
+ 6,0,6,3, 6,0,7,3, 6,0,8,3, 6,0,9,3, 6,8,0,3, 6,8,1,3, 8,0,6,3, 8,0,7,3, 8,8,6,3,
+ 8,8,7,3, 6,1,0,3, 6,1,1,3, 6,1,2,3, 6,1,3,3, 6,1,4,3, 6,1,5,3, 6,1,6,3, 6,1,7,3,
+ 6,1,8,3, 6,1,9,3, 6,9,0,3, 6,9,1,3, 8,1,6,3, 8,1,7,3, 8,9,6,3, 8,9,7,3, 6,2,0,3,
+ 6,2,1,3, 6,2,2,3, 6,2,3,3, 6,2,4,3, 6,2,5,3, 6,2,6,3, 6,2,7,3, 6,2,8,3, 6,2,9,3,
+ 6,8,2,3, 6,8,3,3, 8,2,6,3, 8,2,7,3, 8,6,8,3, 8,6,9,3, 6,3,0,3, 6,3,1,3, 6,3,2,3,
+ 6,3,3,3, 6,3,4,3, 6,3,5,3, 6,3,6,3, 6,3,7,3, 6,3,8,3, 6,3,9,3, 6,9,2,3, 6,9,3,3,
+ 8,3,6,3, 8,3,7,3, 8,7,8,3, 8,7,9,3, 6,4,0,3, 6,4,1,3, 6,4,2,3, 6,4,3,3, 6,4,4,3,
+ 6,4,5,3, 6,4,6,3, 6,4,7,3, 6,4,8,3, 6,4,9,3, 6,8,4,3, 6,8,5,3, 8,4,6,3, 8,4,7,3,
+ 6,8,8,3, 6,8,9,3, 6,5,0,3, 6,5,1,3, 6,5,2,3, 6,5,3,3, 6,5,4,3, 6,5,5,3, 6,5,6,3,
+ 6,5,7,3, 6,5,8,3, 6,5,9,3, 6,9,4,3, 6,9,5,3, 8,5,6,3, 8,5,7,3, 6,9,8,3, 6,9,9,3,
+ 6,6,0,3, 6,6,1,3, 6,6,2,3, 6,6,3,3, 6,6,4,3, 6,6,5,3, 6,6,6,3, 6,6,7,3, 6,6,8,3,
+ 6,6,9,3, 6,8,6,3, 6,8,7,3, 8,6,6,3, 8,6,7,3, 8,8,8,3, 8,8,9,3, 6,7,0,3, 6,7,1,3,
+ 6,7,2,3, 6,7,3,3, 6,7,4,3, 6,7,5,3, 6,7,6,3, 6,7,7,3, 6,7,8,3, 6,7,9,3, 6,9,6,3,
+ 6,9,7,3, 8,7,6,3, 8,7,7,3, 8,9,8,3, 8,9,9,3, 7,0,0,3, 7,0,1,3, 7,0,2,3, 7,0,3,3,
+ 7,0,4,3, 7,0,5,3, 7,0,6,3, 7,0,7,3, 7,0,8,3, 7,0,9,3, 7,8,0,3, 7,8,1,3, 9,0,6,3,
+ 9,0,7,3, 9,8,6,3, 9,8,7,3, 7,1,0,3, 7,1,1,3, 7,1,2,3, 7,1,3,3, 7,1,4,3, 7,1,5,3,
+ 7,1,6,3, 7,1,7,3, 7,1,8,3, 7,1,9,3, 7,9,0,3, 7,9,1,3, 9,1,6,3, 9,1,7,3, 9,9,6,3,
+ 9,9,7,3, 7,2,0,3, 7,2,1,3, 7,2,2,3, 7,2,3,3, 7,2,4,3, 7,2,5,3, 7,2,6,3, 7,2,7,3,
+ 7,2,8,3, 7,2,9,3, 7,8,2,3, 7,8,3,3, 9,2,6,3, 9,2,7,3, 9,6,8,3, 9,6,9,3, 7,3,0,3,
+ 7,3,1,3, 7,3,2,3, 7,3,3,3, 7,3,4,3, 7,3,5,3, 7,3,6,3, 7,3,7,3, 7,3,8,3, 7,3,9,3,
+ 7,9,2,3, 7,9,3,3, 9,3,6,3, 9,3,7,3, 9,7,8,3, 9,7,9,3, 7,4,0,3, 7,4,1,3, 7,4,2,3,
+ 7,4,3,3, 7,4,4,3, 7,4,5,3, 7,4,6,3, 7,4,7,3, 7,4,8,3, 7,4,9,3, 7,8,4,3, 7,8,5,3,
+ 9,4,6,3, 9,4,7,3, 7,8,8,3, 7,8,9,3, 7,5,0,3, 7,5,1,3, 7,5,2,3, 7,5,3,3, 7,5,4,3,
+ 7,5,5,3, 7,5,6,3, 7,5,7,3, 7,5,8,3, 7,5,9,3, 7,9,4,3, 7,9,5,3, 9,5,6,3, 9,5,7,3,
+ 7,9,8,3, 7,9,9,3, 7,6,0,3, 7,6,1,3, 7,6,2,3, 7,6,3,3, 7,6,4,3, 7,6,5,3, 7,6,6,3,
+ 7,6,7,3, 7,6,8,3, 7,6,9,3, 7,8,6,3, 7,8,7,3, 9,6,6,3, 9,6,7,3, 9,8,8,3, 9,8,9,3,
+ 7,7,0,3, 7,7,1,3, 7,7,2,3, 7,7,3,3, 7,7,4,3, 7,7,5,3, 7,7,6,3, 7,7,7,3, 7,7,8,3,
+ 7,7,9,3, 7,9,6,3, 7,9,7,3, 9,7,6,3, 9,7,7,3, 9,9,8,3, 9,9,9,3};
+#endif
+
+#if defined(DEC_BIN2BCD8) && DEC_BIN2BCD8==1 && !defined(DECBIN2BCD8)
+#define DECBIN2BCD8
+
+const uint8_t BIN2BCD8[4000]={
+ 0,0,0,0, 0,0,1,1, 0,0,2,1, 0,0,3,1, 0,0,4,1, 0,0,5,1, 0,0,6,1, 0,0,7,1, 0,0,8,1,
+ 0,0,9,1, 0,1,0,2, 0,1,1,2, 0,1,2,2, 0,1,3,2, 0,1,4,2, 0,1,5,2, 0,1,6,2, 0,1,7,2,
+ 0,1,8,2, 0,1,9,2, 0,2,0,2, 0,2,1,2, 0,2,2,2, 0,2,3,2, 0,2,4,2, 0,2,5,2, 0,2,6,2,
+ 0,2,7,2, 0,2,8,2, 0,2,9,2, 0,3,0,2, 0,3,1,2, 0,3,2,2, 0,3,3,2, 0,3,4,2, 0,3,5,2,
+ 0,3,6,2, 0,3,7,2, 0,3,8,2, 0,3,9,2, 0,4,0,2, 0,4,1,2, 0,4,2,2, 0,4,3,2, 0,4,4,2,
+ 0,4,5,2, 0,4,6,2, 0,4,7,2, 0,4,8,2, 0,4,9,2, 0,5,0,2, 0,5,1,2, 0,5,2,2, 0,5,3,2,
+ 0,5,4,2, 0,5,5,2, 0,5,6,2, 0,5,7,2, 0,5,8,2, 0,5,9,2, 0,6,0,2, 0,6,1,2, 0,6,2,2,
+ 0,6,3,2, 0,6,4,2, 0,6,5,2, 0,6,6,2, 0,6,7,2, 0,6,8,2, 0,6,9,2, 0,7,0,2, 0,7,1,2,
+ 0,7,2,2, 0,7,3,2, 0,7,4,2, 0,7,5,2, 0,7,6,2, 0,7,7,2, 0,7,8,2, 0,7,9,2, 0,8,0,2,
+ 0,8,1,2, 0,8,2,2, 0,8,3,2, 0,8,4,2, 0,8,5,2, 0,8,6,2, 0,8,7,2, 0,8,8,2, 0,8,9,2,
+ 0,9,0,2, 0,9,1,2, 0,9,2,2, 0,9,3,2, 0,9,4,2, 0,9,5,2, 0,9,6,2, 0,9,7,2, 0,9,8,2,
+ 0,9,9,2, 1,0,0,3, 1,0,1,3, 1,0,2,3, 1,0,3,3, 1,0,4,3, 1,0,5,3, 1,0,6,3, 1,0,7,3,
+ 1,0,8,3, 1,0,9,3, 1,1,0,3, 1,1,1,3, 1,1,2,3, 1,1,3,3, 1,1,4,3, 1,1,5,3, 1,1,6,3,
+ 1,1,7,3, 1,1,8,3, 1,1,9,3, 1,2,0,3, 1,2,1,3, 1,2,2,3, 1,2,3,3, 1,2,4,3, 1,2,5,3,
+ 1,2,6,3, 1,2,7,3, 1,2,8,3, 1,2,9,3, 1,3,0,3, 1,3,1,3, 1,3,2,3, 1,3,3,3, 1,3,4,3,
+ 1,3,5,3, 1,3,6,3, 1,3,7,3, 1,3,8,3, 1,3,9,3, 1,4,0,3, 1,4,1,3, 1,4,2,3, 1,4,3,3,
+ 1,4,4,3, 1,4,5,3, 1,4,6,3, 1,4,7,3, 1,4,8,3, 1,4,9,3, 1,5,0,3, 1,5,1,3, 1,5,2,3,
+ 1,5,3,3, 1,5,4,3, 1,5,5,3, 1,5,6,3, 1,5,7,3, 1,5,8,3, 1,5,9,3, 1,6,0,3, 1,6,1,3,
+ 1,6,2,3, 1,6,3,3, 1,6,4,3, 1,6,5,3, 1,6,6,3, 1,6,7,3, 1,6,8,3, 1,6,9,3, 1,7,0,3,
+ 1,7,1,3, 1,7,2,3, 1,7,3,3, 1,7,4,3, 1,7,5,3, 1,7,6,3, 1,7,7,3, 1,7,8,3, 1,7,9,3,
+ 1,8,0,3, 1,8,1,3, 1,8,2,3, 1,8,3,3, 1,8,4,3, 1,8,5,3, 1,8,6,3, 1,8,7,3, 1,8,8,3,
+ 1,8,9,3, 1,9,0,3, 1,9,1,3, 1,9,2,3, 1,9,3,3, 1,9,4,3, 1,9,5,3, 1,9,6,3, 1,9,7,3,
+ 1,9,8,3, 1,9,9,3, 2,0,0,3, 2,0,1,3, 2,0,2,3, 2,0,3,3, 2,0,4,3, 2,0,5,3, 2,0,6,3,
+ 2,0,7,3, 2,0,8,3, 2,0,9,3, 2,1,0,3, 2,1,1,3, 2,1,2,3, 2,1,3,3, 2,1,4,3, 2,1,5,3,
+ 2,1,6,3, 2,1,7,3, 2,1,8,3, 2,1,9,3, 2,2,0,3, 2,2,1,3, 2,2,2,3, 2,2,3,3, 2,2,4,3,
+ 2,2,5,3, 2,2,6,3, 2,2,7,3, 2,2,8,3, 2,2,9,3, 2,3,0,3, 2,3,1,3, 2,3,2,3, 2,3,3,3,
+ 2,3,4,3, 2,3,5,3, 2,3,6,3, 2,3,7,3, 2,3,8,3, 2,3,9,3, 2,4,0,3, 2,4,1,3, 2,4,2,3,
+ 2,4,3,3, 2,4,4,3, 2,4,5,3, 2,4,6,3, 2,4,7,3, 2,4,8,3, 2,4,9,3, 2,5,0,3, 2,5,1,3,
+ 2,5,2,3, 2,5,3,3, 2,5,4,3, 2,5,5,3, 2,5,6,3, 2,5,7,3, 2,5,8,3, 2,5,9,3, 2,6,0,3,
+ 2,6,1,3, 2,6,2,3, 2,6,3,3, 2,6,4,3, 2,6,5,3, 2,6,6,3, 2,6,7,3, 2,6,8,3, 2,6,9,3,
+ 2,7,0,3, 2,7,1,3, 2,7,2,3, 2,7,3,3, 2,7,4,3, 2,7,5,3, 2,7,6,3, 2,7,7,3, 2,7,8,3,
+ 2,7,9,3, 2,8,0,3, 2,8,1,3, 2,8,2,3, 2,8,3,3, 2,8,4,3, 2,8,5,3, 2,8,6,3, 2,8,7,3,
+ 2,8,8,3, 2,8,9,3, 2,9,0,3, 2,9,1,3, 2,9,2,3, 2,9,3,3, 2,9,4,3, 2,9,5,3, 2,9,6,3,
+ 2,9,7,3, 2,9,8,3, 2,9,9,3, 3,0,0,3, 3,0,1,3, 3,0,2,3, 3,0,3,3, 3,0,4,3, 3,0,5,3,
+ 3,0,6,3, 3,0,7,3, 3,0,8,3, 3,0,9,3, 3,1,0,3, 3,1,1,3, 3,1,2,3, 3,1,3,3, 3,1,4,3,
+ 3,1,5,3, 3,1,6,3, 3,1,7,3, 3,1,8,3, 3,1,9,3, 3,2,0,3, 3,2,1,3, 3,2,2,3, 3,2,3,3,
+ 3,2,4,3, 3,2,5,3, 3,2,6,3, 3,2,7,3, 3,2,8,3, 3,2,9,3, 3,3,0,3, 3,3,1,3, 3,3,2,3,
+ 3,3,3,3, 3,3,4,3, 3,3,5,3, 3,3,6,3, 3,3,7,3, 3,3,8,3, 3,3,9,3, 3,4,0,3, 3,4,1,3,
+ 3,4,2,3, 3,4,3,3, 3,4,4,3, 3,4,5,3, 3,4,6,3, 3,4,7,3, 3,4,8,3, 3,4,9,3, 3,5,0,3,
+ 3,5,1,3, 3,5,2,3, 3,5,3,3, 3,5,4,3, 3,5,5,3, 3,5,6,3, 3,5,7,3, 3,5,8,3, 3,5,9,3,
+ 3,6,0,3, 3,6,1,3, 3,6,2,3, 3,6,3,3, 3,6,4,3, 3,6,5,3, 3,6,6,3, 3,6,7,3, 3,6,8,3,
+ 3,6,9,3, 3,7,0,3, 3,7,1,3, 3,7,2,3, 3,7,3,3, 3,7,4,3, 3,7,5,3, 3,7,6,3, 3,7,7,3,
+ 3,7,8,3, 3,7,9,3, 3,8,0,3, 3,8,1,3, 3,8,2,3, 3,8,3,3, 3,8,4,3, 3,8,5,3, 3,8,6,3,
+ 3,8,7,3, 3,8,8,3, 3,8,9,3, 3,9,0,3, 3,9,1,3, 3,9,2,3, 3,9,3,3, 3,9,4,3, 3,9,5,3,
+ 3,9,6,3, 3,9,7,3, 3,9,8,3, 3,9,9,3, 4,0,0,3, 4,0,1,3, 4,0,2,3, 4,0,3,3, 4,0,4,3,
+ 4,0,5,3, 4,0,6,3, 4,0,7,3, 4,0,8,3, 4,0,9,3, 4,1,0,3, 4,1,1,3, 4,1,2,3, 4,1,3,3,
+ 4,1,4,3, 4,1,5,3, 4,1,6,3, 4,1,7,3, 4,1,8,3, 4,1,9,3, 4,2,0,3, 4,2,1,3, 4,2,2,3,
+ 4,2,3,3, 4,2,4,3, 4,2,5,3, 4,2,6,3, 4,2,7,3, 4,2,8,3, 4,2,9,3, 4,3,0,3, 4,3,1,3,
+ 4,3,2,3, 4,3,3,3, 4,3,4,3, 4,3,5,3, 4,3,6,3, 4,3,7,3, 4,3,8,3, 4,3,9,3, 4,4,0,3,
+ 4,4,1,3, 4,4,2,3, 4,4,3,3, 4,4,4,3, 4,4,5,3, 4,4,6,3, 4,4,7,3, 4,4,8,3, 4,4,9,3,
+ 4,5,0,3, 4,5,1,3, 4,5,2,3, 4,5,3,3, 4,5,4,3, 4,5,5,3, 4,5,6,3, 4,5,7,3, 4,5,8,3,
+ 4,5,9,3, 4,6,0,3, 4,6,1,3, 4,6,2,3, 4,6,3,3, 4,6,4,3, 4,6,5,3, 4,6,6,3, 4,6,7,3,
+ 4,6,8,3, 4,6,9,3, 4,7,0,3, 4,7,1,3, 4,7,2,3, 4,7,3,3, 4,7,4,3, 4,7,5,3, 4,7,6,3,
+ 4,7,7,3, 4,7,8,3, 4,7,9,3, 4,8,0,3, 4,8,1,3, 4,8,2,3, 4,8,3,3, 4,8,4,3, 4,8,5,3,
+ 4,8,6,3, 4,8,7,3, 4,8,8,3, 4,8,9,3, 4,9,0,3, 4,9,1,3, 4,9,2,3, 4,9,3,3, 4,9,4,3,
+ 4,9,5,3, 4,9,6,3, 4,9,7,3, 4,9,8,3, 4,9,9,3, 5,0,0,3, 5,0,1,3, 5,0,2,3, 5,0,3,3,
+ 5,0,4,3, 5,0,5,3, 5,0,6,3, 5,0,7,3, 5,0,8,3, 5,0,9,3, 5,1,0,3, 5,1,1,3, 5,1,2,3,
+ 5,1,3,3, 5,1,4,3, 5,1,5,3, 5,1,6,3, 5,1,7,3, 5,1,8,3, 5,1,9,3, 5,2,0,3, 5,2,1,3,
+ 5,2,2,3, 5,2,3,3, 5,2,4,3, 5,2,5,3, 5,2,6,3, 5,2,7,3, 5,2,8,3, 5,2,9,3, 5,3,0,3,
+ 5,3,1,3, 5,3,2,3, 5,3,3,3, 5,3,4,3, 5,3,5,3, 5,3,6,3, 5,3,7,3, 5,3,8,3, 5,3,9,3,
+ 5,4,0,3, 5,4,1,3, 5,4,2,3, 5,4,3,3, 5,4,4,3, 5,4,5,3, 5,4,6,3, 5,4,7,3, 5,4,8,3,
+ 5,4,9,3, 5,5,0,3, 5,5,1,3, 5,5,2,3, 5,5,3,3, 5,5,4,3, 5,5,5,3, 5,5,6,3, 5,5,7,3,
+ 5,5,8,3, 5,5,9,3, 5,6,0,3, 5,6,1,3, 5,6,2,3, 5,6,3,3, 5,6,4,3, 5,6,5,3, 5,6,6,3,
+ 5,6,7,3, 5,6,8,3, 5,6,9,3, 5,7,0,3, 5,7,1,3, 5,7,2,3, 5,7,3,3, 5,7,4,3, 5,7,5,3,
+ 5,7,6,3, 5,7,7,3, 5,7,8,3, 5,7,9,3, 5,8,0,3, 5,8,1,3, 5,8,2,3, 5,8,3,3, 5,8,4,3,
+ 5,8,5,3, 5,8,6,3, 5,8,7,3, 5,8,8,3, 5,8,9,3, 5,9,0,3, 5,9,1,3, 5,9,2,3, 5,9,3,3,
+ 5,9,4,3, 5,9,5,3, 5,9,6,3, 5,9,7,3, 5,9,8,3, 5,9,9,3, 6,0,0,3, 6,0,1,3, 6,0,2,3,
+ 6,0,3,3, 6,0,4,3, 6,0,5,3, 6,0,6,3, 6,0,7,3, 6,0,8,3, 6,0,9,3, 6,1,0,3, 6,1,1,3,
+ 6,1,2,3, 6,1,3,3, 6,1,4,3, 6,1,5,3, 6,1,6,3, 6,1,7,3, 6,1,8,3, 6,1,9,3, 6,2,0,3,
+ 6,2,1,3, 6,2,2,3, 6,2,3,3, 6,2,4,3, 6,2,5,3, 6,2,6,3, 6,2,7,3, 6,2,8,3, 6,2,9,3,
+ 6,3,0,3, 6,3,1,3, 6,3,2,3, 6,3,3,3, 6,3,4,3, 6,3,5,3, 6,3,6,3, 6,3,7,3, 6,3,8,3,
+ 6,3,9,3, 6,4,0,3, 6,4,1,3, 6,4,2,3, 6,4,3,3, 6,4,4,3, 6,4,5,3, 6,4,6,3, 6,4,7,3,
+ 6,4,8,3, 6,4,9,3, 6,5,0,3, 6,5,1,3, 6,5,2,3, 6,5,3,3, 6,5,4,3, 6,5,5,3, 6,5,6,3,
+ 6,5,7,3, 6,5,8,3, 6,5,9,3, 6,6,0,3, 6,6,1,3, 6,6,2,3, 6,6,3,3, 6,6,4,3, 6,6,5,3,
+ 6,6,6,3, 6,6,7,3, 6,6,8,3, 6,6,9,3, 6,7,0,3, 6,7,1,3, 6,7,2,3, 6,7,3,3, 6,7,4,3,
+ 6,7,5,3, 6,7,6,3, 6,7,7,3, 6,7,8,3, 6,7,9,3, 6,8,0,3, 6,8,1,3, 6,8,2,3, 6,8,3,3,
+ 6,8,4,3, 6,8,5,3, 6,8,6,3, 6,8,7,3, 6,8,8,3, 6,8,9,3, 6,9,0,3, 6,9,1,3, 6,9,2,3,
+ 6,9,3,3, 6,9,4,3, 6,9,5,3, 6,9,6,3, 6,9,7,3, 6,9,8,3, 6,9,9,3, 7,0,0,3, 7,0,1,3,
+ 7,0,2,3, 7,0,3,3, 7,0,4,3, 7,0,5,3, 7,0,6,3, 7,0,7,3, 7,0,8,3, 7,0,9,3, 7,1,0,3,
+ 7,1,1,3, 7,1,2,3, 7,1,3,3, 7,1,4,3, 7,1,5,3, 7,1,6,3, 7,1,7,3, 7,1,8,3, 7,1,9,3,
+ 7,2,0,3, 7,2,1,3, 7,2,2,3, 7,2,3,3, 7,2,4,3, 7,2,5,3, 7,2,6,3, 7,2,7,3, 7,2,8,3,
+ 7,2,9,3, 7,3,0,3, 7,3,1,3, 7,3,2,3, 7,3,3,3, 7,3,4,3, 7,3,5,3, 7,3,6,3, 7,3,7,3,
+ 7,3,8,3, 7,3,9,3, 7,4,0,3, 7,4,1,3, 7,4,2,3, 7,4,3,3, 7,4,4,3, 7,4,5,3, 7,4,6,3,
+ 7,4,7,3, 7,4,8,3, 7,4,9,3, 7,5,0,3, 7,5,1,3, 7,5,2,3, 7,5,3,3, 7,5,4,3, 7,5,5,3,
+ 7,5,6,3, 7,5,7,3, 7,5,8,3, 7,5,9,3, 7,6,0,3, 7,6,1,3, 7,6,2,3, 7,6,3,3, 7,6,4,3,
+ 7,6,5,3, 7,6,6,3, 7,6,7,3, 7,6,8,3, 7,6,9,3, 7,7,0,3, 7,7,1,3, 7,7,2,3, 7,7,3,3,
+ 7,7,4,3, 7,7,5,3, 7,7,6,3, 7,7,7,3, 7,7,8,3, 7,7,9,3, 7,8,0,3, 7,8,1,3, 7,8,2,3,
+ 7,8,3,3, 7,8,4,3, 7,8,5,3, 7,8,6,3, 7,8,7,3, 7,8,8,3, 7,8,9,3, 7,9,0,3, 7,9,1,3,
+ 7,9,2,3, 7,9,3,3, 7,9,4,3, 7,9,5,3, 7,9,6,3, 7,9,7,3, 7,9,8,3, 7,9,9,3, 8,0,0,3,
+ 8,0,1,3, 8,0,2,3, 8,0,3,3, 8,0,4,3, 8,0,5,3, 8,0,6,3, 8,0,7,3, 8,0,8,3, 8,0,9,3,
+ 8,1,0,3, 8,1,1,3, 8,1,2,3, 8,1,3,3, 8,1,4,3, 8,1,5,3, 8,1,6,3, 8,1,7,3, 8,1,8,3,
+ 8,1,9,3, 8,2,0,3, 8,2,1,3, 8,2,2,3, 8,2,3,3, 8,2,4,3, 8,2,5,3, 8,2,6,3, 8,2,7,3,
+ 8,2,8,3, 8,2,9,3, 8,3,0,3, 8,3,1,3, 8,3,2,3, 8,3,3,3, 8,3,4,3, 8,3,5,3, 8,3,6,3,
+ 8,3,7,3, 8,3,8,3, 8,3,9,3, 8,4,0,3, 8,4,1,3, 8,4,2,3, 8,4,3,3, 8,4,4,3, 8,4,5,3,
+ 8,4,6,3, 8,4,7,3, 8,4,8,3, 8,4,9,3, 8,5,0,3, 8,5,1,3, 8,5,2,3, 8,5,3,3, 8,5,4,3,
+ 8,5,5,3, 8,5,6,3, 8,5,7,3, 8,5,8,3, 8,5,9,3, 8,6,0,3, 8,6,1,3, 8,6,2,3, 8,6,3,3,
+ 8,6,4,3, 8,6,5,3, 8,6,6,3, 8,6,7,3, 8,6,8,3, 8,6,9,3, 8,7,0,3, 8,7,1,3, 8,7,2,3,
+ 8,7,3,3, 8,7,4,3, 8,7,5,3, 8,7,6,3, 8,7,7,3, 8,7,8,3, 8,7,9,3, 8,8,0,3, 8,8,1,3,
+ 8,8,2,3, 8,8,3,3, 8,8,4,3, 8,8,5,3, 8,8,6,3, 8,8,7,3, 8,8,8,3, 8,8,9,3, 8,9,0,3,
+ 8,9,1,3, 8,9,2,3, 8,9,3,3, 8,9,4,3, 8,9,5,3, 8,9,6,3, 8,9,7,3, 8,9,8,3, 8,9,9,3,
+ 9,0,0,3, 9,0,1,3, 9,0,2,3, 9,0,3,3, 9,0,4,3, 9,0,5,3, 9,0,6,3, 9,0,7,3, 9,0,8,3,
+ 9,0,9,3, 9,1,0,3, 9,1,1,3, 9,1,2,3, 9,1,3,3, 9,1,4,3, 9,1,5,3, 9,1,6,3, 9,1,7,3,
+ 9,1,8,3, 9,1,9,3, 9,2,0,3, 9,2,1,3, 9,2,2,3, 9,2,3,3, 9,2,4,3, 9,2,5,3, 9,2,6,3,
+ 9,2,7,3, 9,2,8,3, 9,2,9,3, 9,3,0,3, 9,3,1,3, 9,3,2,3, 9,3,3,3, 9,3,4,3, 9,3,5,3,
+ 9,3,6,3, 9,3,7,3, 9,3,8,3, 9,3,9,3, 9,4,0,3, 9,4,1,3, 9,4,2,3, 9,4,3,3, 9,4,4,3,
+ 9,4,5,3, 9,4,6,3, 9,4,7,3, 9,4,8,3, 9,4,9,3, 9,5,0,3, 9,5,1,3, 9,5,2,3, 9,5,3,3,
+ 9,5,4,3, 9,5,5,3, 9,5,6,3, 9,5,7,3, 9,5,8,3, 9,5,9,3, 9,6,0,3, 9,6,1,3, 9,6,2,3,
+ 9,6,3,3, 9,6,4,3, 9,6,5,3, 9,6,6,3, 9,6,7,3, 9,6,8,3, 9,6,9,3, 9,7,0,3, 9,7,1,3,
+ 9,7,2,3, 9,7,3,3, 9,7,4,3, 9,7,5,3, 9,7,6,3, 9,7,7,3, 9,7,8,3, 9,7,9,3, 9,8,0,3,
+ 9,8,1,3, 9,8,2,3, 9,8,3,3, 9,8,4,3, 9,8,5,3, 9,8,6,3, 9,8,7,3, 9,8,8,3, 9,8,9,3,
+ 9,9,0,3, 9,9,1,3, 9,9,2,3, 9,9,3,3, 9,9,4,3, 9,9,5,3, 9,9,6,3, 9,9,7,3, 9,9,8,3,
+ 9,9,9,3};
+#endif
+
diff --git a/libdecnumber/decDouble.c b/libdecnumber/decDouble.c
new file mode 100644
index 0000000..ba6a0af
--- /dev/null
+++ b/libdecnumber/decDouble.c
@@ -0,0 +1,154 @@
+/* decDouble module for the decNumber C Library.
+ Copyright (C) 2007 Free Software Foundation, Inc.
+ Contributed by IBM Corporation. Author Mike Cowlishaw.
+
+ This file is part of GCC.
+
+ GCC is free software; you can redistribute it and/or modify it under
+ the terms of the GNU General Public License as published by the Free
+ Software Foundation; either version 2, or (at your option) any later
+ version.
+
+ In addition to the permissions in the GNU General Public License,
+ the Free Software Foundation gives you unlimited permission to link
+ the compiled version of this file into combinations with other
+ programs, and to distribute those combinations without any
+ restriction coming from the use of this file. (The General Public
+ License restrictions do apply in other respects; for example, they
+ cover modification of the file, and distribution when not linked
+ into a combine executable.)
+
+ GCC is distributed in the hope that it will be useful, but WITHOUT ANY
+ WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
+ for more details.
+
+ You should have received a copy of the GNU General Public License
+ along with GCC; see the file COPYING. If not, write to the Free
+ Software Foundation, 51 Franklin Street, Fifth Floor, Boston, MA
+ 02110-1301, USA. */
+
+/* ------------------------------------------------------------------ */
+/* decDouble.c -- decDouble operations module */
+/* ------------------------------------------------------------------ */
+/* This module comprises decDouble operations (including conversions) */
+/* ------------------------------------------------------------------ */
+
+#include "decContext.h" /* public includes */
+#include "decDouble.h" /* .. */
+
+/* Constant mappings for shared code */
+#define DECPMAX DECDOUBLE_Pmax
+#define DECEMIN DECDOUBLE_Emin
+#define DECEMAX DECDOUBLE_Emax
+#define DECEMAXD DECDOUBLE_EmaxD
+#define DECBYTES DECDOUBLE_Bytes
+#define DECSTRING DECDOUBLE_String
+#define DECECONL DECDOUBLE_EconL
+#define DECBIAS DECDOUBLE_Bias
+#define DECLETS DECDOUBLE_Declets
+#define DECQTINY (-DECDOUBLE_Bias)
+/* parameters of next-wider format */
+#define DECWBYTES DECQUAD_Bytes
+#define DECWPMAX DECQUAD_Pmax
+#define DECWECONL DECQUAD_EconL
+#define DECWBIAS DECQUAD_Bias
+
+/* Type and function mappings for shared code */
+#define decFloat decDouble /* Type name */
+#define decFloatWider decQuad /* Type name */
+
+/* Utilities and conversions (binary results, extractors, etc.) */
+#define decFloatFromBCD decDoubleFromBCD
+#define decFloatFromInt32 decDoubleFromInt32
+#define decFloatFromPacked decDoubleFromPacked
+#define decFloatFromString decDoubleFromString
+#define decFloatFromUInt32 decDoubleFromUInt32
+#define decFloatFromWider decDoubleFromWider
+#define decFloatGetCoefficient decDoubleGetCoefficient
+#define decFloatGetExponent decDoubleGetExponent
+#define decFloatSetCoefficient decDoubleSetCoefficient
+#define decFloatSetExponent decDoubleSetExponent
+#define decFloatShow decDoubleShow
+#define decFloatToBCD decDoubleToBCD
+#define decFloatToEngString decDoubleToEngString
+#define decFloatToInt32 decDoubleToInt32
+#define decFloatToInt32Exact decDoubleToInt32Exact
+#define decFloatToPacked decDoubleToPacked
+#define decFloatToString decDoubleToString
+#define decFloatToUInt32 decDoubleToUInt32
+#define decFloatToUInt32Exact decDoubleToUInt32Exact
+#define decFloatToWider decDoubleToWider
+#define decFloatZero decDoubleZero
+
+/* Computational (result is a decFloat) */
+#define decFloatAbs decDoubleAbs
+#define decFloatAdd decDoubleAdd
+#define decFloatAnd decDoubleAnd
+#define decFloatDivide decDoubleDivide
+#define decFloatDivideInteger decDoubleDivideInteger
+#define decFloatFMA decDoubleFMA
+#define decFloatInvert decDoubleInvert
+#define decFloatLogB decDoubleLogB
+#define decFloatMax decDoubleMax
+#define decFloatMaxMag decDoubleMaxMag
+#define decFloatMin decDoubleMin
+#define decFloatMinMag decDoubleMinMag
+#define decFloatMinus decDoubleMinus
+#define decFloatMultiply decDoubleMultiply
+#define decFloatNextMinus decDoubleNextMinus
+#define decFloatNextPlus decDoubleNextPlus
+#define decFloatNextToward decDoubleNextToward
+#define decFloatOr decDoubleOr
+#define decFloatPlus decDoublePlus
+#define decFloatQuantize decDoubleQuantize
+#define decFloatReduce decDoubleReduce
+#define decFloatRemainder decDoubleRemainder
+#define decFloatRemainderNear decDoubleRemainderNear
+#define decFloatRotate decDoubleRotate
+#define decFloatScaleB decDoubleScaleB
+#define decFloatShift decDoubleShift
+#define decFloatSubtract decDoubleSubtract
+#define decFloatToIntegralValue decDoubleToIntegralValue
+#define decFloatToIntegralExact decDoubleToIntegralExact
+#define decFloatXor decDoubleXor
+
+/* Comparisons */
+#define decFloatCompare decDoubleCompare
+#define decFloatCompareSignal decDoubleCompareSignal
+#define decFloatCompareTotal decDoubleCompareTotal
+#define decFloatCompareTotalMag decDoubleCompareTotalMag
+
+/* Copies */
+#define decFloatCanonical decDoubleCanonical
+#define decFloatCopy decDoubleCopy
+#define decFloatCopyAbs decDoubleCopyAbs
+#define decFloatCopyNegate decDoubleCopyNegate
+#define decFloatCopySign decDoubleCopySign
+
+/* Non-computational */
+#define decFloatClass decDoubleClass
+#define decFloatClassString decDoubleClassString
+#define decFloatDigits decDoubleDigits
+#define decFloatIsCanonical decDoubleIsCanonical
+#define decFloatIsFinite decDoubleIsFinite
+#define decFloatIsInfinite decDoubleIsInfinite
+#define decFloatIsInteger decDoubleIsInteger
+#define decFloatIsNaN decDoubleIsNaN
+#define decFloatIsNormal decDoubleIsNormal
+#define decFloatIsSignaling decDoubleIsSignaling
+#define decFloatIsSignalling decDoubleIsSignalling
+#define decFloatIsSigned decDoubleIsSigned
+#define decFloatIsSubnormal decDoubleIsSubnormal
+#define decFloatIsZero decDoubleIsZero
+#define decFloatRadix decDoubleRadix
+#define decFloatSameQuantum decDoubleSameQuantum
+#define decFloatVersion decDoubleVersion
+
+
+#include "decNumberLocal.h" /* local includes (need DECPMAX) */
+#include "decCommon.c" /* non-arithmetic decFloat routines */
+#include "decBasic.c" /* basic formats routines */
+
+/* Below here will move to shared file as completed */
+
diff --git a/libdecnumber/decDouble.h b/libdecnumber/decDouble.h
new file mode 100644
index 0000000..32eba39
--- /dev/null
+++ b/libdecnumber/decDouble.h
@@ -0,0 +1,164 @@
+/* decDouble module header for the decNumber C Library.
+ Copyright (C) 2007 Free Software Foundation, Inc.
+ Contributed by IBM Corporation. Author Mike Cowlishaw.
+
+ This file is part of GCC.
+
+ GCC is free software; you can redistribute it and/or modify it under
+ the terms of the GNU General Public License as published by the Free
+ Software Foundation; either version 2, or (at your option) any later
+ version.
+
+ In addition to the permissions in the GNU General Public License,
+ the Free Software Foundation gives you unlimited permission to link
+ the compiled version of this file into combinations with other
+ programs, and to distribute those combinations without any
+ restriction coming from the use of this file. (The General Public
+ License restrictions do apply in other respects; for example, they
+ cover modification of the file, and distribution when not linked
+ into a combine executable.)
+
+ GCC is distributed in the hope that it will be useful, but WITHOUT ANY
+ WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
+ for more details.
+
+ You should have received a copy of the GNU General Public License
+ along with GCC; see the file COPYING. If not, write to the Free
+ Software Foundation, 51 Franklin Street, Fifth Floor, Boston, MA
+ 02110-1301, USA. */
+
+/* ------------------------------------------------------------------ */
+/* decDouble.h -- Decimal 64-bit format module header */
+/* ------------------------------------------------------------------ */
+/* Please see decFloats.h for an overview and documentation details. */
+/* ------------------------------------------------------------------ */
+
+#if !defined(DECDOUBLE)
+ #define DECDOUBLE
+
+ #define DECDOUBLENAME "decimalDouble" /* Short name */
+ #define DECDOUBLETITLE "Decimal 64-bit datum" /* Verbose name */
+ #define DECDOUBLEAUTHOR "Mike Cowlishaw" /* Who to blame */
+
+ /* parameters for decDoubles */
+ #define DECDOUBLE_Bytes 8 /* length */
+ #define DECDOUBLE_Pmax 16 /* maximum precision (digits) */
+ #define DECDOUBLE_Emin -383 /* minimum adjusted exponent */
+ #define DECDOUBLE_Emax 384 /* maximum adjusted exponent */
+ #define DECDOUBLE_EmaxD 3 /* maximum exponent digits */
+ #define DECDOUBLE_Bias 398 /* bias for the exponent */
+ #define DECDOUBLE_String 25 /* maximum string length, +1 */
+ #define DECDOUBLE_EconL 8 /* exponent continuation length */
+ #define DECDOUBLE_Declets 5 /* count of declets */
+ /* highest biased exponent (Elimit-1) */
+ #define DECDOUBLE_Ehigh (DECDOUBLE_Emax + DECDOUBLE_Bias - (DECDOUBLE_Pmax-1))
+
+ /* Required includes */
+ #include "decContext.h"
+ #include "decQuad.h"
+
+ /* The decDouble decimal 64-bit type, accessible by bytes */
+ typedef struct {
+ uint8_t bytes[DECDOUBLE_Bytes]; /* fields: 1, 5, 8, 50 bits */
+ } decDouble;
+
+ /* ---------------------------------------------------------------- */
+ /* Routines -- implemented as decFloat routines in common files */
+ /* ---------------------------------------------------------------- */
+
+ #include "decDoubleSymbols.h"
+
+ /* Utilities and conversions, extractors, etc.) */
+ extern decDouble * decDoubleFromBCD(decDouble *, int32_t, const uint8_t *, int32_t);
+ extern decDouble * decDoubleFromInt32(decDouble *, int32_t);
+ extern decDouble * decDoubleFromPacked(decDouble *, int32_t, const uint8_t *);
+ extern decDouble * decDoubleFromString(decDouble *, const char *, decContext *);
+ extern decDouble * decDoubleFromUInt32(decDouble *, uint32_t);
+ extern decDouble * decDoubleFromWider(decDouble *, const decQuad *, decContext *);
+ extern int32_t decDoubleGetCoefficient(const decDouble *, uint8_t *);
+ extern int32_t decDoubleGetExponent(const decDouble *);
+ extern decDouble * decDoubleSetCoefficient(decDouble *, const uint8_t *, int32_t);
+ extern decDouble * decDoubleSetExponent(decDouble *, decContext *, int32_t);
+ extern void decDoubleShow(const decDouble *, const char *);
+ extern int32_t decDoubleToBCD(const decDouble *, int32_t *, uint8_t *);
+ extern char * decDoubleToEngString(const decDouble *, char *);
+ extern int32_t decDoubleToInt32(const decDouble *, decContext *, enum rounding);
+ extern int32_t decDoubleToInt32Exact(const decDouble *, decContext *, enum rounding);
+ extern int32_t decDoubleToPacked(const decDouble *, int32_t *, uint8_t *);
+ extern char * decDoubleToString(const decDouble *, char *);
+ extern uint32_t decDoubleToUInt32(const decDouble *, decContext *, enum rounding);
+ extern uint32_t decDoubleToUInt32Exact(const decDouble *, decContext *, enum rounding);
+ extern decQuad * decDoubleToWider(const decDouble *, decQuad *);
+ extern decDouble * decDoubleZero(decDouble *);
+
+ /* Computational (result is a decDouble) */
+ extern decDouble * decDoubleAbs(decDouble *, const decDouble *, decContext *);
+ extern decDouble * decDoubleAdd(decDouble *, const decDouble *, const decDouble *, decContext *);
+ extern decDouble * decDoubleAnd(decDouble *, const decDouble *, const decDouble *, decContext *);
+ extern decDouble * decDoubleDivide(decDouble *, const decDouble *, const decDouble *, decContext *);
+ extern decDouble * decDoubleDivideInteger(decDouble *, const decDouble *, const decDouble *, decContext *);
+ extern decDouble * decDoubleFMA(decDouble *, const decDouble *, const decDouble *, const decDouble *, decContext *);
+ extern decDouble * decDoubleInvert(decDouble *, const decDouble *, decContext *);
+ extern decDouble * decDoubleLogB(decDouble *, const decDouble *, decContext *);
+ extern decDouble * decDoubleMax(decDouble *, const decDouble *, const decDouble *, decContext *);
+ extern decDouble * decDoubleMaxMag(decDouble *, const decDouble *, const decDouble *, decContext *);
+ extern decDouble * decDoubleMin(decDouble *, const decDouble *, const decDouble *, decContext *);
+ extern decDouble * decDoubleMinMag(decDouble *, const decDouble *, const decDouble *, decContext *);
+ extern decDouble * decDoubleMinus(decDouble *, const decDouble *, decContext *);
+ extern decDouble * decDoubleMultiply(decDouble *, const decDouble *, const decDouble *, decContext *);
+ extern decDouble * decDoubleNextMinus(decDouble *, const decDouble *, decContext *);
+ extern decDouble * decDoubleNextPlus(decDouble *, const decDouble *, decContext *);
+ extern decDouble * decDoubleNextToward(decDouble *, const decDouble *, const decDouble *, decContext *);
+ extern decDouble * decDoubleOr(decDouble *, const decDouble *, const decDouble *, decContext *);
+ extern decDouble * decDoublePlus(decDouble *, const decDouble *, decContext *);
+ extern decDouble * decDoubleQuantize(decDouble *, const decDouble *, const decDouble *, decContext *);
+ extern decDouble * decDoubleReduce(decDouble *, const decDouble *, decContext *);
+ extern decDouble * decDoubleRemainder(decDouble *, const decDouble *, const decDouble *, decContext *);
+ extern decDouble * decDoubleRemainderNear(decDouble *, const decDouble *, const decDouble *, decContext *);
+ extern decDouble * decDoubleRotate(decDouble *, const decDouble *, const decDouble *, decContext *);
+ extern decDouble * decDoubleScaleB(decDouble *, const decDouble *, const decDouble *, decContext *);
+ extern decDouble * decDoubleShift(decDouble *, const decDouble *, const decDouble *, decContext *);
+ extern decDouble * decDoubleSubtract(decDouble *, const decDouble *, const decDouble *, decContext *);
+ extern decDouble * decDoubleToIntegralValue(decDouble *, const decDouble *, decContext *, enum rounding);
+ extern decDouble * decDoubleToIntegralExact(decDouble *, const decDouble *, decContext *);
+ extern decDouble * decDoubleXor(decDouble *, const decDouble *, const decDouble *, decContext *);
+
+ /* Comparisons */
+ extern decDouble * decDoubleCompare(decDouble *, const decDouble *, const decDouble *, decContext *);
+ extern decDouble * decDoubleCompareSignal(decDouble *, const decDouble *, const decDouble *, decContext *);
+ extern decDouble * decDoubleCompareTotal(decDouble *, const decDouble *, const decDouble *);
+ extern decDouble * decDoubleCompareTotalMag(decDouble *, const decDouble *, const decDouble *);
+
+ /* Copies */
+ extern decDouble * decDoubleCanonical(decDouble *, const decDouble *);
+ extern decDouble * decDoubleCopy(decDouble *, const decDouble *);
+ extern decDouble * decDoubleCopyAbs(decDouble *, const decDouble *);
+ extern decDouble * decDoubleCopyNegate(decDouble *, const decDouble *);
+ extern decDouble * decDoubleCopySign(decDouble *, const decDouble *, const decDouble *);
+
+ /* Non-computational */
+ extern enum decClass decDoubleClass(const decDouble *);
+ extern const char * decDoubleClassString(const decDouble *);
+ extern uint32_t decDoubleDigits(const decDouble *);
+ extern uint32_t decDoubleIsCanonical(const decDouble *);
+ extern uint32_t decDoubleIsFinite(const decDouble *);
+ extern uint32_t decDoubleIsInfinite(const decDouble *);
+ extern uint32_t decDoubleIsInteger(const decDouble *);
+ extern uint32_t decDoubleIsNaN(const decDouble *);
+ extern uint32_t decDoubleIsNormal(const decDouble *);
+ extern uint32_t decDoubleIsSignaling(const decDouble *);
+ extern uint32_t decDoubleIsSignalling(const decDouble *);
+ extern uint32_t decDoubleIsSigned(const decDouble *);
+ extern uint32_t decDoubleIsSubnormal(const decDouble *);
+ extern uint32_t decDoubleIsZero(const decDouble *);
+ extern uint32_t decDoubleRadix(const decDouble *);
+ extern uint32_t decDoubleSameQuantum(const decDouble *, const decDouble *);
+ extern const char * decDoubleVersion(void);
+
+ /* decNumber conversions; these are implemented as macros so as not */
+ /* to force a dependency on decimal64 and decNumber in decDouble. */
+ #define decDoubleToNumber(dq, dn) decimal64ToNumber((decimal64 *)(dq), dn)
+ #define decDoubleFromNumber(dq, dn, set) (decDouble *)decimal64FromNumber((decimal64 *)(dq), dn, set)
+
+#endif
diff --git a/libdecnumber/decDoubleSymbols.h b/libdecnumber/decDoubleSymbols.h
new file mode 100644
index 0000000..add1248
--- /dev/null
+++ b/libdecnumber/decDoubleSymbols.h
@@ -0,0 +1,84 @@
+#if !defined(DECDOUBLESYMBOLS)
+#define DECDOUBLESYMBOLS
+
+#ifdef IN_LIBGCC2
+#define decDoubleAbs __decDoubleAbs
+#define decDoubleAdd __decDoubleAdd
+#define decDoubleAnd __decDoubleAnd
+#define decDoubleCanonical __decDoubleCanonical
+#define decDoubleClass __decDoubleClass
+#define decDoubleClassString __decDoubleClassString
+#define decDoubleCompare __decDoubleCompare
+#define decDoubleCompareSignal __decDoubleCompareSignal
+#define decDoubleCompareTotal __decDoubleCompareTotal
+#define decDoubleCompareTotalMag __decDoubleCompareTotalMag
+#define decDoubleCopy __decDoubleCopy
+#define decDoubleCopyAbs __decDoubleCopyAbs
+#define decDoubleCopyNegate __decDoubleCopyNegate
+#define decDoubleCopySign __decDoubleCopySign
+#define decDoubleDigits __decDoubleDigits
+#define decDoubleDivide __decDoubleDivide
+#define decDoubleDivideInteger __decDoubleDivideInteger
+#define decDoubleFMA __decDoubleFMA
+#define decDoubleFromBCD __decDoubleFromBCD
+#define decDoubleFromInt32 __decDoubleFromInt32
+#define decDoubleFromPacked __decDoubleFromPacked
+#define decDoubleFromString __decDoubleFromString
+#define decDoubleFromUInt32 __decDoubleFromUInt32
+#define decDoubleFromWider __decDoubleFromWider
+#define decDoubleGetCoefficient __decDoubleGetCoefficient
+#define decDoubleGetExponent __decDoubleGetExponent
+#define decDoubleInvert __decDoubleInvert
+#define decDoubleIsCanonical __decDoubleIsCanonical
+#define decDoubleIsFinite __decDoubleIsFinite
+#define decDoubleIsInfinite __decDoubleIsInfinite
+#define decDoubleIsInteger __decDoubleIsInteger
+#define decDoubleIsNaN __decDoubleIsNaN
+#define decDoubleIsNormal __decDoubleIsNormal
+#define decDoubleIsSignaling __decDoubleIsSignaling
+#define decDoubleIsSignalling __decDoubleIsSignalling
+#define decDoubleIsSigned __decDoubleIsSigned
+#define decDoubleIsSubnormal __decDoubleIsSubnormal
+#define decDoubleIsZero __decDoubleIsZero
+#define decDoubleLogB __decDoubleLogB
+#define decDoubleMax __decDoubleMax
+#define decDoubleMaxMag __decDoubleMaxMag
+#define decDoubleMin __decDoubleMin
+#define decDoubleMinMag __decDoubleMinMag
+#define decDoubleMinus __decDoubleMinus
+#define decDoubleMultiply __decDoubleMultiply
+#define decDoubleNextMinus __decDoubleNextMinus
+#define decDoubleNextPlus __decDoubleNextPlus
+#define decDoubleNextToward __decDoubleNextToward
+#define decDoubleOr __decDoubleOr
+#define decDoublePlus __decDoublePlus
+#define decDoubleQuantize __decDoubleQuantize
+#define decDoubleRadix __decDoubleRadix
+#define decDoubleReduce __decDoubleReduce
+#define decDoubleRemainder __decDoubleRemainder
+#define decDoubleRemainderNear __decDoubleRemainderNear
+#define decDoubleRotate __decDoubleRotate
+#define decDoubleSameQuantum __decDoubleSameQuantum
+#define decDoubleScaleB __decDoubleScaleB
+#define decDoubleSetCoefficient __decDoubleSetCoefficient
+#define decDoubleSetExponent __decDoubleSetExponent
+#define decDoubleShift __decDoubleShift
+#define decDoubleShow __decDoubleShow
+#define decDoubleSubtract __decDoubleSubtract
+#define decDoubleToBCD __decDoubleToBCD
+#define decDoubleToEngString __decDoubleToEngString
+#define decDoubleToInt32 __decDoubleToInt32
+#define decDoubleToInt32Exact __decDoubleToInt32Exact
+#define decDoubleToIntegralExact __decDoubleToIntegralExact
+#define decDoubleToIntegralValue __decDoubleToIntegralValue
+#define decDoubleToPacked __decDoubleToPacked
+#define decDoubleToString __decDoubleToString
+#define decDoubleToUInt32 __decDoubleToUInt32
+#define decDoubleToUInt32Exact __decDoubleToUInt32Exact
+#define decDoubleToWider __decDoubleToWider
+#define decDoubleVersion __decDoubleVersion
+#define decDoubleXor __decDoubleXor
+#define decDoubleZero __decDoubleZero
+#endif
+
+#endif
diff --git a/libdecnumber/decExcept.c b/libdecnumber/decExcept.c
new file mode 100644
index 0000000..6821702
--- /dev/null
+++ b/libdecnumber/decExcept.c
@@ -0,0 +1,59 @@
+/* Temporary library support for decimal floating point.
+ Copyright (C) 2005, 2006 Free Software Foundation, Inc.
+
+ This file is part of GCC.
+
+ GCC is free software; you can redistribute it and/or modify it
+ under the terms of the GNU General Public License as published by
+ the Free Software Foundation; either version 2, or (at your option)
+ any later version.
+
+ In addition to the permissions in the GNU General Public License, the
+ Free Software Foundation gives you unlimited permission to link the
+ compiled version of this file into combinations with other programs,
+ and to distribute those combinations without any restriction coming
+ from the use of this file. (The General Public License restrictions
+ do apply in other respects; for example, they cover modification of
+ the file, and distribution when not linked into a combine
+ executable.)
+
+ GCC is distributed in the hope that it will be useful, but WITHOUT
+ ANY WARRANTY; without even the implied warranty of MERCHANTABILITY
+ or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public
+ License for more details.
+
+ You should have received a copy of the GNU General Public License
+ along with GCC; see the file COPYING. If not, write to the Free
+ Software Foundation, 51 Franklin Street, Fifth Floor, Boston, MA
+ 02110-1301, USA. */
+
+#include <fenv.h>
+#include "config.h"
+#include "decContext.h"
+#include "decExcept.h"
+
+/* Internal, non-documented functions for testing libgcc functions.
+ This support is not sufficient for real use. */
+
+static int __dfp_except_flags = 0;
+
+/* Clear the dummy exception flags. */
+void
+__dfp_clear_except (void)
+{
+ __dfp_except_flags = 0;
+}
+
+/* Return the dummy exception flags corresponding to the mask. */
+int
+__dfp_test_except (int mask)
+{
+ return __dfp_except_flags & mask;
+}
+
+/* Set dummy exception flags. */
+void
+__dfp_raise_except (int flags)
+{
+ __dfp_except_flags |= flags;
+}
diff --git a/libdecnumber/decExcept.h b/libdecnumber/decExcept.h
new file mode 100644
index 0000000..12ba87d
--- /dev/null
+++ b/libdecnumber/decExcept.h
@@ -0,0 +1,39 @@
+/* Temporary library support for decimal floating point.
+ Copyright (C) 2006 Free Software Foundation, Inc.
+
+ This file is part of GCC.
+
+ GCC is free software; you can redistribute it and/or modify it
+ under the terms of the GNU General Public License as published by
+ the Free Software Foundation; either version 2, or (at your option)
+ any later version.
+
+ In addition to the permissions in the GNU General Public License, the
+ Free Software Foundation gives you unlimited permission to link the
+ compiled version of this file into combinations with other programs,
+ and to distribute those combinations without any restriction coming
+ from the use of this file. (The General Public License restrictions
+ do apply in other respects; for example, they cover modification of
+ the file, and distribution when not linked into a combine
+ executable.)
+
+ GCC is distributed in the hope that it will be useful, but WITHOUT
+ ANY WARRANTY; without even the implied warranty of MERCHANTABILITY
+ or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public
+ License for more details.
+
+ You should have received a copy of the GNU General Public License
+ along with GCC; see the file COPYING. If not, write to the Free
+ Software Foundation, 51 Franklin Street, Fifth Floor, Boston, MA
+ 02110-1301, USA. */
+
+#include <fenv.h>
+#include "config.h"
+#include "decContext.h"
+
+#define DFP_EXCEPTIONS_ENABLED 1
+#define DFP_HANDLE_EXCEPTIONS(A) __dfp_raise_except(A)
+
+void __dfp_clear_except (void);
+int __dfp_test_except (int);
+void __dfp_raise_except (int);
diff --git a/libdecnumber/decLibrary.c b/libdecnumber/decLibrary.c
new file mode 100644
index 0000000..7e5e928
--- /dev/null
+++ b/libdecnumber/decLibrary.c
@@ -0,0 +1,76 @@
+/* Temporary library support for decimal floating point.
+ Copyright (C) 2005, 2006 Free Software Foundation, Inc.
+
+ This file is part of GCC.
+
+ GCC is free software; you can redistribute it and/or modify it
+ under the terms of the GNU General Public License as published by
+ the Free Software Foundation; either version 2, or (at your option)
+ any later version.
+
+ In addition to the permissions in the GNU General Public License,
+ the Free Software Foundation gives you unlimited permission to link
+ the compiled version of this file into combinations with other
+ programs, and to distribute those combinations without any
+ restriction coming from the use of this file. (The General Public
+ License restrictions do apply in other respects; for example, they
+ cover modification of the file, and distribution when not linked
+ into a combine executable.)
+
+ GCC is distributed in the hope that it will be useful, but WITHOUT
+ ANY WARRANTY; without even the implied warranty of MERCHANTABILITY
+ or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public
+ License for more details.
+
+ You should have received a copy of the GNU General Public License
+ along with GCC; see the file COPYING. If not, write to the Free
+ Software Foundation, 51 Franklin Street, Fifth Floor, Boston, MA
+ 02110-1301, USA. */
+
+#include "config.h"
+#include "decContext.h"
+#include "decimal128.h"
+#include "decimal64.h"
+#include "decimal32.h"
+
+void __host_to_ieee_32 (_Decimal32, decimal32 *);
+void __host_to_ieee_64 (_Decimal64, decimal64 *);
+void __host_to_ieee_128 (_Decimal128, decimal128 *);
+
+extern int isinfd32 (_Decimal32);
+extern int isinfd64 (_Decimal64);
+extern int isinfd128 (_Decimal128);
+uint32_t __dec_byte_swap (uint32_t);
+
+int
+isinfd32 (_Decimal32 arg)
+{
+ decNumber dn;
+ decimal32 d32;
+
+ __host_to_ieee_32 (arg, &d32);
+ decimal32ToNumber (&d32, &dn);
+ return (decNumberIsInfinite (&dn));
+}
+
+int
+isinfd64 (_Decimal64 arg)
+{
+ decNumber dn;
+ decimal64 d64;
+
+ __host_to_ieee_64 (arg, &d64);
+ decimal64ToNumber (&d64, &dn);
+ return (decNumberIsInfinite (&dn));
+}
+
+int
+isinfd128 (_Decimal128 arg)
+{
+ decNumber dn;
+ decimal128 d128;
+
+ __host_to_ieee_128 (arg, &d128);
+ decimal128ToNumber (&d128, &dn);
+ return (decNumberIsInfinite (&dn));
+}
diff --git a/libdecnumber/decNumber.c b/libdecnumber/decNumber.c
new file mode 100644
index 0000000..c5e223c
--- /dev/null
+++ b/libdecnumber/decNumber.c
@@ -0,0 +1,8122 @@
+/* Decimal number arithmetic module for the decNumber C Library.
+ Copyright (C) 2005, 2007 Free Software Foundation, Inc.
+ Contributed by IBM Corporation. Author Mike Cowlishaw.
+
+ This file is part of GCC.
+
+ GCC is free software; you can redistribute it and/or modify it under
+ the terms of the GNU General Public License as published by the Free
+ Software Foundation; either version 2, or (at your option) any later
+ version.
+
+ In addition to the permissions in the GNU General Public License,
+ the Free Software Foundation gives you unlimited permission to link
+ the compiled version of this file into combinations with other
+ programs, and to distribute those combinations without any
+ restriction coming from the use of this file. (The General Public
+ License restrictions do apply in other respects; for example, they
+ cover modification of the file, and distribution when not linked
+ into a combine executable.)
+
+ GCC is distributed in the hope that it will be useful, but WITHOUT ANY
+ WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
+ for more details.
+
+ You should have received a copy of the GNU General Public License
+ along with GCC; see the file COPYING. If not, write to the Free
+ Software Foundation, 51 Franklin Street, Fifth Floor, Boston, MA
+ 02110-1301, USA. */
+
+/* ------------------------------------------------------------------ */
+/* Decimal Number arithmetic module */
+/* ------------------------------------------------------------------ */
+/* This module comprises the routines for General Decimal Arithmetic */
+/* as defined in the specification which may be found on the */
+/* http://www2.hursley.ibm.com/decimal web pages. It implements both */
+/* the full ('extended') arithmetic and the simpler ('subset') */
+/* arithmetic. */
+/* */
+/* Usage notes: */
+/* */
+/* 1. This code is ANSI C89 except: */
+/* */
+/* If DECDPUN>4 or DECUSE64=1, the C99 64-bit int64_t and */
+/* uint64_t types may be used. To avoid these, set DECUSE64=0 */
+/* and DECDPUN<=4 (see documentation). */
+/* */
+/* 2. The decNumber format which this library uses is optimized for */
+/* efficient processing of relatively short numbers; in particular */
+/* it allows the use of fixed sized structures and minimizes copy */
+/* and move operations. It does, however, support arbitrary */
+/* precision (up to 999,999,999 digits) and arbitrary exponent */
+/* range (Emax in the range 0 through 999,999,999 and Emin in the */
+/* range -999,999,999 through 0). Mathematical functions (for */
+/* example decNumberExp) as identified below are restricted more */
+/* tightly: digits, emax, and -emin in the context must be <= */
+/* DEC_MAX_MATH (999999), and their operand(s) must be within */
+/* these bounds. */
+/* */
+/* 3. Logical functions are further restricted; their operands must */
+/* be finite, positive, have an exponent of zero, and all digits */
+/* must be either 0 or 1. The result will only contain digits */
+/* which are 0 or 1 (and will have exponent=0 and a sign of 0). */
+/* */
+/* 4. Operands to operator functions are never modified unless they */
+/* are also specified to be the result number (which is always */
+/* permitted). Other than that case, operands must not overlap. */
+/* */
+/* 5. Error handling: the type of the error is ORed into the status */
+/* flags in the current context (decContext structure). The */
+/* SIGFPE signal is then raised if the corresponding trap-enabler */
+/* flag in the decContext is set (is 1). */
+/* */
+/* It is the responsibility of the caller to clear the status */
+/* flags as required. */
+/* */
+/* The result of any routine which returns a number will always */
+/* be a valid number (which may be a special value, such as an */
+/* Infinity or NaN). */
+/* */
+/* 6. The decNumber format is not an exchangeable concrete */
+/* representation as it comprises fields which may be machine- */
+/* dependent (packed or unpacked, or special length, for example). */
+/* Canonical conversions to and from strings are provided; other */
+/* conversions are available in separate modules. */
+/* */
+/* 7. Normally, input operands are assumed to be valid. Set DECCHECK */
+/* to 1 for extended operand checking (including NULL operands). */
+/* Results are undefined if a badly-formed structure (or a NULL */
+/* pointer to a structure) is provided, though with DECCHECK */
+/* enabled the operator routines are protected against exceptions. */
+/* (Except if the result pointer is NULL, which is unrecoverable.) */
+/* */
+/* However, the routines will never cause exceptions if they are */
+/* given well-formed operands, even if the value of the operands */
+/* is inappropriate for the operation and DECCHECK is not set. */
+/* (Except for SIGFPE, as and where documented.) */
+/* */
+/* 8. Subset arithmetic is available only if DECSUBSET is set to 1. */
+/* ------------------------------------------------------------------ */
+/* Implementation notes for maintenance of this module: */
+/* */
+/* 1. Storage leak protection: Routines which use malloc are not */
+/* permitted to use return for fastpath or error exits (i.e., */
+/* they follow strict structured programming conventions). */
+/* Instead they have a do{}while(0); construct surrounding the */
+/* code which is protected -- break may be used to exit this. */
+/* Other routines can safely use the return statement inline. */
+/* */
+/* Storage leak accounting can be enabled using DECALLOC. */
+/* */
+/* 2. All loops use the for(;;) construct. Any do construct does */
+/* not loop; it is for allocation protection as just described. */
+/* */
+/* 3. Setting status in the context must always be the very last */
+/* action in a routine, as non-0 status may raise a trap and hence */
+/* the call to set status may not return (if the handler uses long */
+/* jump). Therefore all cleanup must be done first. In general, */
+/* to achieve this status is accumulated and is only applied just */
+/* before return by calling decContextSetStatus (via decStatus). */
+/* */
+/* Routines which allocate storage cannot, in general, use the */
+/* 'top level' routines which could cause a non-returning */
+/* transfer of control. The decXxxxOp routines are safe (do not */
+/* call decStatus even if traps are set in the context) and should */
+/* be used instead (they are also a little faster). */
+/* */
+/* 4. Exponent checking is minimized by allowing the exponent to */
+/* grow outside its limits during calculations, provided that */
+/* the decFinalize function is called later. Multiplication and */
+/* division, and intermediate calculations in exponentiation, */
+/* require more careful checks because of the risk of 31-bit */
+/* overflow (the most negative valid exponent is -1999999997, for */
+/* a 999999999-digit number with adjusted exponent of -999999999). */
+/* */
+/* 5. Rounding is deferred until finalization of results, with any */
+/* 'off to the right' data being represented as a single digit */
+/* residue (in the range -1 through 9). This avoids any double- */
+/* rounding when more than one shortening takes place (for */
+/* example, when a result is subnormal). */
+/* */
+/* 6. The digits count is allowed to rise to a multiple of DECDPUN */
+/* during many operations, so whole Units are handled and exact */
+/* accounting of digits is not needed. The correct digits value */
+/* is found by decGetDigits, which accounts for leading zeros. */
+/* This must be called before any rounding if the number of digits */
+/* is not known exactly. */
+/* */
+/* 7. The multiply-by-reciprocal 'trick' is used for partitioning */
+/* numbers up to four digits, using appropriate constants. This */
+/* is not useful for longer numbers because overflow of 32 bits */
+/* would lead to 4 multiplies, which is almost as expensive as */
+/* a divide (unless a floating-point or 64-bit multiply is */
+/* assumed to be available). */
+/* */
+/* 8. Unusual abbreviations that may be used in the commentary: */
+/* lhs -- left hand side (operand, of an operation) */
+/* lsd -- least significant digit (of coefficient) */
+/* lsu -- least significant Unit (of coefficient) */
+/* msd -- most significant digit (of coefficient) */
+/* msi -- most significant item (in an array) */
+/* msu -- most significant Unit (of coefficient) */
+/* rhs -- right hand side (operand, of an operation) */
+/* +ve -- positive */
+/* -ve -- negative */
+/* ** -- raise to the power */
+/* ------------------------------------------------------------------ */
+
+#include <stdlib.h> /* for malloc, free, etc. */
+#include <stdio.h> /* for printf [if needed] */
+#include <string.h> /* for strcpy */
+#include <ctype.h> /* for lower */
+#include "config.h" /* for GCC definitions */
+#include "decNumber.h" /* base number library */
+#include "decNumberLocal.h" /* decNumber local types, etc. */
+
+/* Constants */
+/* Public lookup table used by the D2U macro */
+const uByte d2utable[DECMAXD2U+1]=D2UTABLE;
+
+#define DECVERB 1 /* set to 1 for verbose DECCHECK */
+#define powers DECPOWERS /* old internal name */
+
+/* Local constants */
+#define DIVIDE 0x80 /* Divide operators */
+#define REMAINDER 0x40 /* .. */
+#define DIVIDEINT 0x20 /* .. */
+#define REMNEAR 0x10 /* .. */
+#define COMPARE 0x01 /* Compare operators */
+#define COMPMAX 0x02 /* .. */
+#define COMPMIN 0x03 /* .. */
+#define COMPTOTAL 0x04 /* .. */
+#define COMPNAN 0x05 /* .. [NaN processing] */
+#define COMPSIG 0x06 /* .. [signaling COMPARE] */
+#define COMPMAXMAG 0x07 /* .. */
+#define COMPMINMAG 0x08 /* .. */
+
+#define DEC_sNaN 0x40000000 /* local status: sNaN signal */
+#define BADINT (Int)0x80000000 /* most-negative Int; error indicator */
+/* Next two indicate an integer >= 10**6, and its parity (bottom bit) */
+#define BIGEVEN (Int)0x80000002
+#define BIGODD (Int)0x80000003
+
+static Unit uarrone[1]={1}; /* Unit array of 1, used for incrementing */
+
+/* Granularity-dependent code */
+#if DECDPUN<=4
+ #define eInt Int /* extended integer */
+ #define ueInt uInt /* unsigned extended integer */
+ /* Constant multipliers for divide-by-power-of five using reciprocal */
+ /* multiply, after removing powers of 2 by shifting, and final shift */
+ /* of 17 [we only need up to **4] */
+ static const uInt multies[]={131073, 26215, 5243, 1049, 210};
+ /* QUOT10 -- macro to return the quotient of unit u divided by 10**n */
+ #define QUOT10(u, n) ((((uInt)(u)>>(n))*multies[n])>>17)
+#else
+ /* For DECDPUN>4 non-ANSI-89 64-bit types are needed. */
+ #if !DECUSE64
+ #error decNumber.c: DECUSE64 must be 1 when DECDPUN>4
+ #endif
+ #define eInt Long /* extended integer */
+ #define ueInt uLong /* unsigned extended integer */
+#endif
+
+/* Local routines */
+static decNumber * decAddOp(decNumber *, const decNumber *, const decNumber *,
+ decContext *, uByte, uInt *);
+static Flag decBiStr(const char *, const char *, const char *);
+static uInt decCheckMath(const decNumber *, decContext *, uInt *);
+static void decApplyRound(decNumber *, decContext *, Int, uInt *);
+static Int decCompare(const decNumber *lhs, const decNumber *rhs, Flag);
+static decNumber * decCompareOp(decNumber *, const decNumber *,
+ const decNumber *, decContext *,
+ Flag, uInt *);
+static void decCopyFit(decNumber *, const decNumber *, decContext *,
+ Int *, uInt *);
+static decNumber * decDecap(decNumber *, Int);
+static decNumber * decDivideOp(decNumber *, const decNumber *,
+ const decNumber *, decContext *, Flag, uInt *);
+static decNumber * decExpOp(decNumber *, const decNumber *,
+ decContext *, uInt *);
+static void decFinalize(decNumber *, decContext *, Int *, uInt *);
+static Int decGetDigits(Unit *, Int);
+static Int decGetInt(const decNumber *);
+static decNumber * decLnOp(decNumber *, const decNumber *,
+ decContext *, uInt *);
+static decNumber * decMultiplyOp(decNumber *, const decNumber *,
+ const decNumber *, decContext *,
+ uInt *);
+static decNumber * decNaNs(decNumber *, const decNumber *,
+ const decNumber *, decContext *, uInt *);
+static decNumber * decQuantizeOp(decNumber *, const decNumber *,
+ const decNumber *, decContext *, Flag,
+ uInt *);
+static void decReverse(Unit *, Unit *);
+static void decSetCoeff(decNumber *, decContext *, const Unit *,
+ Int, Int *, uInt *);
+static void decSetMaxValue(decNumber *, decContext *);
+static void decSetOverflow(decNumber *, decContext *, uInt *);
+static void decSetSubnormal(decNumber *, decContext *, Int *, uInt *);
+static Int decShiftToLeast(Unit *, Int, Int);
+static Int decShiftToMost(Unit *, Int, Int);
+static void decStatus(decNumber *, uInt, decContext *);
+static void decToString(const decNumber *, char[], Flag);
+static decNumber * decTrim(decNumber *, decContext *, Flag, Int *);
+static Int decUnitAddSub(const Unit *, Int, const Unit *, Int, Int,
+ Unit *, Int);
+static Int decUnitCompare(const Unit *, Int, const Unit *, Int, Int);
+
+#if !DECSUBSET
+/* decFinish == decFinalize when no subset arithmetic needed */
+#define decFinish(a,b,c,d) decFinalize(a,b,c,d)
+#else
+static void decFinish(decNumber *, decContext *, Int *, uInt *);
+static decNumber * decRoundOperand(const decNumber *, decContext *, uInt *);
+#endif
+
+/* Local macros */
+/* masked special-values bits */
+#define SPECIALARG (rhs->bits & DECSPECIAL)
+#define SPECIALARGS ((lhs->bits | rhs->bits) & DECSPECIAL)
+
+/* Diagnostic macros, etc. */
+#if DECALLOC
+/* Handle malloc/free accounting. If enabled, our accountable routines */
+/* are used; otherwise the code just goes straight to the system malloc */
+/* and free routines. */
+#define malloc(a) decMalloc(a)
+#define free(a) decFree(a)
+#define DECFENCE 0x5a /* corruption detector */
+/* 'Our' malloc and free: */
+static void *decMalloc(size_t);
+static void decFree(void *);
+uInt decAllocBytes=0; /* count of bytes allocated */
+/* Note that DECALLOC code only checks for storage buffer overflow. */
+/* To check for memory leaks, the decAllocBytes variable must be */
+/* checked to be 0 at appropriate times (e.g., after the test */
+/* harness completes a set of tests). This checking may be unreliable */
+/* if the testing is done in a multi-thread environment. */
+#endif
+
+#if DECCHECK
+/* Optional checking routines. Enabling these means that decNumber */
+/* and decContext operands to operator routines are checked for */
+/* correctness. This roughly doubles the execution time of the */
+/* fastest routines (and adds 600+ bytes), so should not normally be */
+/* used in 'production'. */
+/* decCheckInexact is used to check that inexact results have a full */
+/* complement of digits (where appropriate -- this is not the case */
+/* for Quantize, for example) */
+#define DECUNRESU ((decNumber *)(void *)0xffffffff)
+#define DECUNUSED ((const decNumber *)(void *)0xffffffff)
+#define DECUNCONT ((decContext *)(void *)(0xffffffff))
+static Flag decCheckOperands(decNumber *, const decNumber *,
+ const decNumber *, decContext *);
+static Flag decCheckNumber(const decNumber *);
+static void decCheckInexact(const decNumber *, decContext *);
+#endif
+
+#if DECTRACE || DECCHECK
+/* Optional trace/debugging routines (may or may not be used) */
+void decNumberShow(const decNumber *); /* displays the components of a number */
+static void decDumpAr(char, const Unit *, Int);
+#endif
+
+/* ================================================================== */
+/* Conversions */
+/* ================================================================== */
+
+/* ------------------------------------------------------------------ */
+/* from-int32 -- conversion from Int or uInt */
+/* */
+/* dn is the decNumber to receive the integer */
+/* in or uin is the integer to be converted */
+/* returns dn */
+/* */
+/* No error is possible. */
+/* ------------------------------------------------------------------ */
+decNumber * decNumberFromInt32(decNumber *dn, Int in) {
+ uInt unsig;
+ if (in>=0) unsig=in;
+ else { /* negative (possibly BADINT) */
+ if (in==BADINT) unsig=(uInt)1073741824*2; /* special case */
+ else unsig=-in; /* invert */
+ }
+ /* in is now positive */
+ decNumberFromUInt32(dn, unsig);
+ if (in<0) dn->bits=DECNEG; /* sign needed */
+ return dn;
+ } /* decNumberFromInt32 */
+
+decNumber * decNumberFromUInt32(decNumber *dn, uInt uin) {
+ Unit *up; /* work pointer */
+ decNumberZero(dn); /* clean */
+ if (uin==0) return dn; /* [or decGetDigits bad call] */
+ for (up=dn->lsu; uin>0; up++) {
+ *up=(Unit)(uin%(DECDPUNMAX+1));
+ uin=uin/(DECDPUNMAX+1);
+ }
+ dn->digits=decGetDigits(dn->lsu, up-dn->lsu);
+ return dn;
+ } /* decNumberFromUInt32 */
+
+/* ------------------------------------------------------------------ */
+/* to-int32 -- conversion to Int or uInt */
+/* */
+/* dn is the decNumber to convert */
+/* set is the context for reporting errors */
+/* returns the converted decNumber, or 0 if Invalid is set */
+/* */
+/* Invalid is set if the decNumber does not have exponent==0 or if */
+/* it is a NaN, Infinite, or out-of-range. */
+/* ------------------------------------------------------------------ */
+Int decNumberToInt32(const decNumber *dn, decContext *set) {
+ #if DECCHECK
+ if (decCheckOperands(DECUNRESU, DECUNUSED, dn, set)) return 0;
+ #endif
+
+ /* special or too many digits, or bad exponent */
+ if (dn->bits&DECSPECIAL || dn->digits>10 || dn->exponent!=0) ; /* bad */
+ else { /* is a finite integer with 10 or fewer digits */
+ Int d; /* work */
+ const Unit *up; /* .. */
+ uInt hi=0, lo; /* .. */
+ up=dn->lsu; /* -> lsu */
+ lo=*up; /* get 1 to 9 digits */
+ #if DECDPUN>1 /* split to higher */
+ hi=lo/10;
+ lo=lo%10;
+ #endif
+ up++;
+ /* collect remaining Units, if any, into hi */
+ for (d=DECDPUN; d<dn->digits; up++, d+=DECDPUN) hi+=*up*powers[d-1];
+ /* now low has the lsd, hi the remainder */
+ if (hi>214748364 || (hi==214748364 && lo>7)) { /* out of range? */
+ /* most-negative is a reprieve */
+ if (dn->bits&DECNEG && hi==214748364 && lo==8) return 0x80000000;
+ /* bad -- drop through */
+ }
+ else { /* in-range always */
+ Int i=X10(hi)+lo;
+ if (dn->bits&DECNEG) return -i;
+ return i;
+ }
+ } /* integer */
+ decContextSetStatus(set, DEC_Invalid_operation); /* [may not return] */
+ return 0;
+ } /* decNumberToInt32 */
+
+uInt decNumberToUInt32(const decNumber *dn, decContext *set) {
+ #if DECCHECK
+ if (decCheckOperands(DECUNRESU, DECUNUSED, dn, set)) return 0;
+ #endif
+ /* special or too many digits, or bad exponent, or negative (<0) */
+ if (dn->bits&DECSPECIAL || dn->digits>10 || dn->exponent!=0
+ || (dn->bits&DECNEG && !ISZERO(dn))); /* bad */
+ else { /* is a finite integer with 10 or fewer digits */
+ Int d; /* work */
+ const Unit *up; /* .. */
+ uInt hi=0, lo; /* .. */
+ up=dn->lsu; /* -> lsu */
+ lo=*up; /* get 1 to 9 digits */
+ #if DECDPUN>1 /* split to higher */
+ hi=lo/10;
+ lo=lo%10;
+ #endif
+ up++;
+ /* collect remaining Units, if any, into hi */
+ for (d=DECDPUN; d<dn->digits; up++, d+=DECDPUN) hi+=*up*powers[d-1];
+
+ /* now low has the lsd, hi the remainder */
+ if (hi>429496729 || (hi==429496729 && lo>5)) ; /* no reprieve possible */
+ else return X10(hi)+lo;
+ } /* integer */
+ decContextSetStatus(set, DEC_Invalid_operation); /* [may not return] */
+ return 0;
+ } /* decNumberToUInt32 */
+
+/* ------------------------------------------------------------------ */
+/* to-scientific-string -- conversion to numeric string */
+/* to-engineering-string -- conversion to numeric string */
+/* */
+/* decNumberToString(dn, string); */
+/* decNumberToEngString(dn, string); */
+/* */
+/* dn is the decNumber to convert */
+/* string is the string where the result will be laid out */
+/* */
+/* string must be at least dn->digits+14 characters long */
+/* */
+/* No error is possible, and no status can be set. */
+/* ------------------------------------------------------------------ */
+char * decNumberToString(const decNumber *dn, char *string){
+ decToString(dn, string, 0);
+ return string;
+ } /* DecNumberToString */
+
+char * decNumberToEngString(const decNumber *dn, char *string){
+ decToString(dn, string, 1);
+ return string;
+ } /* DecNumberToEngString */
+
+/* ------------------------------------------------------------------ */
+/* to-number -- conversion from numeric string */
+/* */
+/* decNumberFromString -- convert string to decNumber */
+/* dn -- the number structure to fill */
+/* chars[] -- the string to convert ('\0' terminated) */
+/* set -- the context used for processing any error, */
+/* determining the maximum precision available */
+/* (set.digits), determining the maximum and minimum */
+/* exponent (set.emax and set.emin), determining if */
+/* extended values are allowed, and checking the */
+/* rounding mode if overflow occurs or rounding is */
+/* needed. */
+/* */
+/* The length of the coefficient and the size of the exponent are */
+/* checked by this routine, so the correct error (Underflow or */
+/* Overflow) can be reported or rounding applied, as necessary. */
+/* */
+/* If bad syntax is detected, the result will be a quiet NaN. */
+/* ------------------------------------------------------------------ */
+decNumber * decNumberFromString(decNumber *dn, const char chars[],
+ decContext *set) {
+ Int exponent=0; /* working exponent [assume 0] */
+ uByte bits=0; /* working flags [assume +ve] */
+ Unit *res; /* where result will be built */
+ Unit resbuff[SD2U(DECBUFFER+9)];/* local buffer in case need temporary */
+ /* [+9 allows for ln() constants] */
+ Unit *allocres=NULL; /* -> allocated result, iff allocated */
+ Int d=0; /* count of digits found in decimal part */
+ const char *dotchar=NULL; /* where dot was found */
+ const char *cfirst=chars; /* -> first character of decimal part */
+ const char *last=NULL; /* -> last digit of decimal part */
+ const char *c; /* work */
+ Unit *up; /* .. */
+ #if DECDPUN>1
+ Int cut, out; /* .. */
+ #endif
+ Int residue; /* rounding residue */
+ uInt status=0; /* error code */
+
+ #if DECCHECK
+ if (decCheckOperands(DECUNRESU, DECUNUSED, DECUNUSED, set))
+ return decNumberZero(dn);
+ #endif
+
+ do { /* status & malloc protection */
+ for (c=chars;; c++) { /* -> input character */
+ if (*c>='0' && *c<='9') { /* test for Arabic digit */
+ last=c;
+ d++; /* count of real digits */
+ continue; /* still in decimal part */
+ }
+ if (*c=='.' && dotchar==NULL) { /* first '.' */
+ dotchar=c; /* record offset into decimal part */
+ if (c==cfirst) cfirst++; /* first digit must follow */
+ continue;}
+ if (c==chars) { /* first in string... */
+ if (*c=='-') { /* valid - sign */
+ cfirst++;
+ bits=DECNEG;
+ continue;}
+ if (*c=='+') { /* valid + sign */
+ cfirst++;
+ continue;}
+ }
+ /* *c is not a digit, or a valid +, -, or '.' */
+ break;
+ } /* c */
+
+ if (last==NULL) { /* no digits yet */
+ status=DEC_Conversion_syntax;/* assume the worst */
+ if (*c=='\0') break; /* and no more to come... */
+ #if DECSUBSET
+ /* if subset then infinities and NaNs are not allowed */
+ if (!set->extended) break; /* hopeless */
+ #endif
+ /* Infinities and NaNs are possible, here */
+ if (dotchar!=NULL) break; /* .. unless had a dot */
+ decNumberZero(dn); /* be optimistic */
+ if (decBiStr(c, "infinity", "INFINITY")
+ || decBiStr(c, "inf", "INF")) {
+ dn->bits=bits | DECINF;
+ status=0; /* is OK */
+ break; /* all done */
+ }
+ /* a NaN expected */
+ /* 2003.09.10 NaNs are now permitted to have a sign */
+ dn->bits=bits | DECNAN; /* assume simple NaN */
+ if (*c=='s' || *c=='S') { /* looks like an sNaN */
+ c++;
+ dn->bits=bits | DECSNAN;
+ }
+ if (*c!='n' && *c!='N') break; /* check caseless "NaN" */
+ c++;
+ if (*c!='a' && *c!='A') break; /* .. */
+ c++;
+ if (*c!='n' && *c!='N') break; /* .. */
+ c++;
+ /* now either nothing, or nnnn payload, expected */
+ /* -> start of integer and skip leading 0s [including plain 0] */
+ for (cfirst=c; *cfirst=='0';) cfirst++;
+ if (*cfirst=='\0') { /* "NaN" or "sNaN", maybe with all 0s */
+ status=0; /* it's good */
+ break; /* .. */
+ }
+ /* something other than 0s; setup last and d as usual [no dots] */
+ for (c=cfirst;; c++, d++) {
+ if (*c<'0' || *c>'9') break; /* test for Arabic digit */
+ last=c;
+ }
+ if (*c!='\0') break; /* not all digits */
+ if (d>set->digits-1) {
+ /* [NB: payload in a decNumber can be full length unless */
+ /* clamped, in which case can only be digits-1] */
+ if (set->clamp) break;
+ if (d>set->digits) break;
+ } /* too many digits? */
+ /* good; drop through to convert the integer to coefficient */
+ status=0; /* syntax is OK */
+ bits=dn->bits; /* for copy-back */
+ } /* last==NULL */
+
+ else if (*c!='\0') { /* more to process... */
+ /* had some digits; exponent is only valid sequence now */
+ Flag nege; /* 1=negative exponent */
+ const char *firstexp; /* -> first significant exponent digit */
+ status=DEC_Conversion_syntax;/* assume the worst */
+ if (*c!='e' && *c!='E') break;
+ /* Found 'e' or 'E' -- now process explicit exponent */
+ /* 1998.07.11: sign no longer required */
+ nege=0;
+ c++; /* to (possible) sign */
+ if (*c=='-') {nege=1; c++;}
+ else if (*c=='+') c++;
+ if (*c=='\0') break;
+
+ for (; *c=='0' && *(c+1)!='\0';) c++; /* strip insignificant zeros */
+ firstexp=c; /* save exponent digit place */
+ for (; ;c++) {
+ if (*c<'0' || *c>'9') break; /* not a digit */
+ exponent=X10(exponent)+(Int)*c-(Int)'0';
+ } /* c */
+ /* if not now on a '\0', *c must not be a digit */
+ if (*c!='\0') break;
+
+ /* (this next test must be after the syntax checks) */
+ /* if it was too long the exponent may have wrapped, so check */
+ /* carefully and set it to a certain overflow if wrap possible */
+ if (c>=firstexp+9+1) {
+ if (c>firstexp+9+1 || *firstexp>'1') exponent=DECNUMMAXE*2;
+ /* [up to 1999999999 is OK, for example 1E-1000000998] */
+ }
+ if (nege) exponent=-exponent; /* was negative */
+ status=0; /* is OK */
+ } /* stuff after digits */
+
+ /* Here when whole string has been inspected; syntax is good */
+ /* cfirst->first digit (never dot), last->last digit (ditto) */
+
+ /* strip leading zeros/dot [leave final 0 if all 0's] */
+ if (*cfirst=='0') { /* [cfirst has stepped over .] */
+ for (c=cfirst; c<last; c++, cfirst++) {
+ if (*c=='.') continue; /* ignore dots */
+ if (*c!='0') break; /* non-zero found */
+ d--; /* 0 stripped */
+ } /* c */
+ #if DECSUBSET
+ /* make a rapid exit for easy zeros if !extended */
+ if (*cfirst=='0' && !set->extended) {
+ decNumberZero(dn); /* clean result */
+ break; /* [could be return] */
+ }
+ #endif
+ } /* at least one leading 0 */
+
+ /* Handle decimal point... */
+ if (dotchar!=NULL && dotchar<last) /* non-trailing '.' found? */
+ exponent-=(last-dotchar); /* adjust exponent */
+ /* [we can now ignore the .] */
+
+ /* OK, the digits string is good. Assemble in the decNumber, or in */
+ /* a temporary units array if rounding is needed */
+ if (d<=set->digits) res=dn->lsu; /* fits into supplied decNumber */
+ else { /* rounding needed */
+ Int needbytes=D2U(d)*sizeof(Unit);/* bytes needed */
+ res=resbuff; /* assume use local buffer */
+ if (needbytes>(Int)sizeof(resbuff)) { /* too big for local */
+ allocres=(Unit *)malloc(needbytes);
+ if (allocres==NULL) {status|=DEC_Insufficient_storage; break;}
+ res=allocres;
+ }
+ }
+ /* res now -> number lsu, buffer, or allocated storage for Unit array */
+
+ /* Place the coefficient into the selected Unit array */
+ /* [this is often 70% of the cost of this function when DECDPUN>1] */
+ #if DECDPUN>1
+ out=0; /* accumulator */
+ up=res+D2U(d)-1; /* -> msu */
+ cut=d-(up-res)*DECDPUN; /* digits in top unit */
+ for (c=cfirst;; c++) { /* along the digits */
+ if (*c=='.') continue; /* ignore '.' [don't decrement cut] */
+ out=X10(out)+(Int)*c-(Int)'0';
+ if (c==last) break; /* done [never get to trailing '.'] */
+ cut--;
+ if (cut>0) continue; /* more for this unit */
+ *up=(Unit)out; /* write unit */
+ up--; /* prepare for unit below.. */
+ cut=DECDPUN; /* .. */
+ out=0; /* .. */
+ } /* c */
+ *up=(Unit)out; /* write lsu */
+
+ #else
+ /* DECDPUN==1 */
+ up=res; /* -> lsu */
+ for (c=last; c>=cfirst; c--) { /* over each character, from least */
+ if (*c=='.') continue; /* ignore . [don't step up] */
+ *up=(Unit)((Int)*c-(Int)'0');
+ up++;
+ } /* c */
+ #endif
+
+ dn->bits=bits;
+ dn->exponent=exponent;
+ dn->digits=d;
+
+ /* if not in number (too long) shorten into the number */
+ if (d>set->digits) {
+ residue=0;
+ decSetCoeff(dn, set, res, d, &residue, &status);
+ /* always check for overflow or subnormal and round as needed */
+ decFinalize(dn, set, &residue, &status);
+ }
+ else { /* no rounding, but may still have overflow or subnormal */
+ /* [these tests are just for performance; finalize repeats them] */
+ if ((dn->exponent-1<set->emin-dn->digits)
+ || (dn->exponent-1>set->emax-set->digits)) {
+ residue=0;
+ decFinalize(dn, set, &residue, &status);
+ }
+ }
+ /* decNumberShow(dn); */
+ } while(0); /* [for break] */
+
+ if (allocres!=NULL) free(allocres); /* drop any storage used */
+ if (status!=0) decStatus(dn, status, set);
+ return dn;
+ } /* decNumberFromString */
+
+/* ================================================================== */
+/* Operators */
+/* ================================================================== */
+
+/* ------------------------------------------------------------------ */
+/* decNumberAbs -- absolute value operator */
+/* */
+/* This computes C = abs(A) */
+/* */
+/* res is C, the result. C may be A */
+/* rhs is A */
+/* set is the context */
+/* */
+/* See also decNumberCopyAbs for a quiet bitwise version of this. */
+/* C must have space for set->digits digits. */
+/* ------------------------------------------------------------------ */
+/* This has the same effect as decNumberPlus unless A is negative, */
+/* in which case it has the same effect as decNumberMinus. */
+/* ------------------------------------------------------------------ */
+decNumber * decNumberAbs(decNumber *res, const decNumber *rhs,
+ decContext *set) {
+ decNumber dzero; /* for 0 */
+ uInt status=0; /* accumulator */
+
+ #if DECCHECK
+ if (decCheckOperands(res, DECUNUSED, rhs, set)) return res;
+ #endif
+
+ decNumberZero(&dzero); /* set 0 */
+ dzero.exponent=rhs->exponent; /* [no coefficient expansion] */
+ decAddOp(res, &dzero, rhs, set, (uByte)(rhs->bits & DECNEG), &status);
+ if (status!=0) decStatus(res, status, set);
+ #if DECCHECK
+ decCheckInexact(res, set);
+ #endif
+ return res;
+ } /* decNumberAbs */
+
+/* ------------------------------------------------------------------ */
+/* decNumberAdd -- add two Numbers */
+/* */
+/* This computes C = A + B */
+/* */
+/* res is C, the result. C may be A and/or B (e.g., X=X+X) */
+/* lhs is A */
+/* rhs is B */
+/* set is the context */
+/* */
+/* C must have space for set->digits digits. */
+/* ------------------------------------------------------------------ */
+/* This just calls the routine shared with Subtract */
+decNumber * decNumberAdd(decNumber *res, const decNumber *lhs,
+ const decNumber *rhs, decContext *set) {
+ uInt status=0; /* accumulator */
+ decAddOp(res, lhs, rhs, set, 0, &status);
+ if (status!=0) decStatus(res, status, set);
+ #if DECCHECK
+ decCheckInexact(res, set);
+ #endif
+ return res;
+ } /* decNumberAdd */
+
+/* ------------------------------------------------------------------ */
+/* decNumberAnd -- AND two Numbers, digitwise */
+/* */
+/* This computes C = A & B */
+/* */
+/* res is C, the result. C may be A and/or B (e.g., X=X&X) */
+/* lhs is A */
+/* rhs is B */
+/* set is the context (used for result length and error report) */
+/* */
+/* C must have space for set->digits digits. */
+/* */
+/* Logical function restrictions apply (see above); a NaN is */
+/* returned with Invalid_operation if a restriction is violated. */
+/* ------------------------------------------------------------------ */
+decNumber * decNumberAnd(decNumber *res, const decNumber *lhs,
+ const decNumber *rhs, decContext *set) {
+ const Unit *ua, *ub; /* -> operands */
+ const Unit *msua, *msub; /* -> operand msus */
+ Unit *uc, *msuc; /* -> result and its msu */
+ Int msudigs; /* digits in res msu */
+ #if DECCHECK
+ if (decCheckOperands(res, lhs, rhs, set)) return res;
+ #endif
+
+ if (lhs->exponent!=0 || decNumberIsSpecial(lhs) || decNumberIsNegative(lhs)
+ || rhs->exponent!=0 || decNumberIsSpecial(rhs) || decNumberIsNegative(rhs)) {
+ decStatus(res, DEC_Invalid_operation, set);
+ return res;
+ }
+
+ /* operands are valid */
+ ua=lhs->lsu; /* bottom-up */
+ ub=rhs->lsu; /* .. */
+ uc=res->lsu; /* .. */
+ msua=ua+D2U(lhs->digits)-1; /* -> msu of lhs */
+ msub=ub+D2U(rhs->digits)-1; /* -> msu of rhs */
+ msuc=uc+D2U(set->digits)-1; /* -> msu of result */
+ msudigs=MSUDIGITS(set->digits); /* [faster than remainder] */
+ for (; uc<=msuc; ua++, ub++, uc++) { /* Unit loop */
+ Unit a, b; /* extract units */
+ if (ua>msua) a=0;
+ else a=*ua;
+ if (ub>msub) b=0;
+ else b=*ub;
+ *uc=0; /* can now write back */
+ if (a|b) { /* maybe 1 bits to examine */
+ Int i, j;
+ *uc=0; /* can now write back */
+ /* This loop could be unrolled and/or use BIN2BCD tables */
+ for (i=0; i<DECDPUN; i++) {
+ if (a&b&1) *uc=*uc+(Unit)powers[i]; /* effect AND */
+ j=a%10;
+ a=a/10;
+ j|=b%10;
+ b=b/10;
+ if (j>1) {
+ decStatus(res, DEC_Invalid_operation, set);
+ return res;
+ }
+ if (uc==msuc && i==msudigs-1) break; /* just did final digit */
+ } /* each digit */
+ } /* both OK */
+ } /* each unit */
+ /* [here uc-1 is the msu of the result] */
+ res->digits=decGetDigits(res->lsu, uc-res->lsu);
+ res->exponent=0; /* integer */
+ res->bits=0; /* sign=0 */
+ return res; /* [no status to set] */
+ } /* decNumberAnd */
+
+/* ------------------------------------------------------------------ */
+/* decNumberCompare -- compare two Numbers */
+/* */
+/* This computes C = A ? B */
+/* */
+/* res is C, the result. C may be A and/or B (e.g., X=X?X) */
+/* lhs is A */
+/* rhs is B */
+/* set is the context */
+/* */
+/* C must have space for one digit (or NaN). */
+/* ------------------------------------------------------------------ */
+decNumber * decNumberCompare(decNumber *res, const decNumber *lhs,
+ const decNumber *rhs, decContext *set) {
+ uInt status=0; /* accumulator */
+ decCompareOp(res, lhs, rhs, set, COMPARE, &status);
+ if (status!=0) decStatus(res, status, set);
+ return res;
+ } /* decNumberCompare */
+
+/* ------------------------------------------------------------------ */
+/* decNumberCompareSignal -- compare, signalling on all NaNs */
+/* */
+/* This computes C = A ? B */
+/* */
+/* res is C, the result. C may be A and/or B (e.g., X=X?X) */
+/* lhs is A */
+/* rhs is B */
+/* set is the context */
+/* */
+/* C must have space for one digit (or NaN). */
+/* ------------------------------------------------------------------ */
+decNumber * decNumberCompareSignal(decNumber *res, const decNumber *lhs,
+ const decNumber *rhs, decContext *set) {
+ uInt status=0; /* accumulator */
+ decCompareOp(res, lhs, rhs, set, COMPSIG, &status);
+ if (status!=0) decStatus(res, status, set);
+ return res;
+ } /* decNumberCompareSignal */
+
+/* ------------------------------------------------------------------ */
+/* decNumberCompareTotal -- compare two Numbers, using total ordering */
+/* */
+/* This computes C = A ? B, under total ordering */
+/* */
+/* res is C, the result. C may be A and/or B (e.g., X=X?X) */
+/* lhs is A */
+/* rhs is B */
+/* set is the context */
+/* */
+/* C must have space for one digit; the result will always be one of */
+/* -1, 0, or 1. */
+/* ------------------------------------------------------------------ */
+decNumber * decNumberCompareTotal(decNumber *res, const decNumber *lhs,
+ const decNumber *rhs, decContext *set) {
+ uInt status=0; /* accumulator */
+ decCompareOp(res, lhs, rhs, set, COMPTOTAL, &status);
+ if (status!=0) decStatus(res, status, set);
+ return res;
+ } /* decNumberCompareTotal */
+
+/* ------------------------------------------------------------------ */
+/* decNumberCompareTotalMag -- compare, total ordering of magnitudes */
+/* */
+/* This computes C = |A| ? |B|, under total ordering */
+/* */
+/* res is C, the result. C may be A and/or B (e.g., X=X?X) */
+/* lhs is A */
+/* rhs is B */
+/* set is the context */
+/* */
+/* C must have space for one digit; the result will always be one of */
+/* -1, 0, or 1. */
+/* ------------------------------------------------------------------ */
+decNumber * decNumberCompareTotalMag(decNumber *res, const decNumber *lhs,
+ const decNumber *rhs, decContext *set) {
+ uInt status=0; /* accumulator */
+ uInt needbytes; /* for space calculations */
+ decNumber bufa[D2N(DECBUFFER+1)];/* +1 in case DECBUFFER=0 */
+ decNumber *allocbufa=NULL; /* -> allocated bufa, iff allocated */
+ decNumber bufb[D2N(DECBUFFER+1)];
+ decNumber *allocbufb=NULL; /* -> allocated bufb, iff allocated */
+ decNumber *a, *b; /* temporary pointers */
+
+ #if DECCHECK
+ if (decCheckOperands(res, lhs, rhs, set)) return res;
+ #endif
+
+ do { /* protect allocated storage */
+ /* if either is negative, take a copy and absolute */
+ if (decNumberIsNegative(lhs)) { /* lhs<0 */
+ a=bufa;
+ needbytes=sizeof(decNumber)+(D2U(lhs->digits)-1)*sizeof(Unit);
+ if (needbytes>sizeof(bufa)) { /* need malloc space */
+ allocbufa=(decNumber *)malloc(needbytes);
+ if (allocbufa==NULL) { /* hopeless -- abandon */
+ status|=DEC_Insufficient_storage;
+ break;}
+ a=allocbufa; /* use the allocated space */
+ }
+ decNumberCopy(a, lhs); /* copy content */
+ a->bits&=~DECNEG; /* .. and clear the sign */
+ lhs=a; /* use copy from here on */
+ }
+ if (decNumberIsNegative(rhs)) { /* rhs<0 */
+ b=bufb;
+ needbytes=sizeof(decNumber)+(D2U(rhs->digits)-1)*sizeof(Unit);
+ if (needbytes>sizeof(bufb)) { /* need malloc space */
+ allocbufb=(decNumber *)malloc(needbytes);
+ if (allocbufb==NULL) { /* hopeless -- abandon */
+ status|=DEC_Insufficient_storage;
+ break;}
+ b=allocbufb; /* use the allocated space */
+ }
+ decNumberCopy(b, rhs); /* copy content */
+ b->bits&=~DECNEG; /* .. and clear the sign */
+ rhs=b; /* use copy from here on */
+ }
+ decCompareOp(res, lhs, rhs, set, COMPTOTAL, &status);
+ } while(0); /* end protected */
+
+ if (allocbufa!=NULL) free(allocbufa); /* drop any storage used */
+ if (allocbufb!=NULL) free(allocbufb); /* .. */
+ if (status!=0) decStatus(res, status, set);
+ return res;
+ } /* decNumberCompareTotalMag */
+
+/* ------------------------------------------------------------------ */
+/* decNumberDivide -- divide one number by another */
+/* */
+/* This computes C = A / B */
+/* */
+/* res is C, the result. C may be A and/or B (e.g., X=X/X) */
+/* lhs is A */
+/* rhs is B */
+/* set is the context */
+/* */
+/* C must have space for set->digits digits. */
+/* ------------------------------------------------------------------ */
+decNumber * decNumberDivide(decNumber *res, const decNumber *lhs,
+ const decNumber *rhs, decContext *set) {
+ uInt status=0; /* accumulator */
+ decDivideOp(res, lhs, rhs, set, DIVIDE, &status);
+ if (status!=0) decStatus(res, status, set);
+ #if DECCHECK
+ decCheckInexact(res, set);
+ #endif
+ return res;
+ } /* decNumberDivide */
+
+/* ------------------------------------------------------------------ */
+/* decNumberDivideInteger -- divide and return integer quotient */
+/* */
+/* This computes C = A # B, where # is the integer divide operator */
+/* */
+/* res is C, the result. C may be A and/or B (e.g., X=X#X) */
+/* lhs is A */
+/* rhs is B */
+/* set is the context */
+/* */
+/* C must have space for set->digits digits. */
+/* ------------------------------------------------------------------ */
+decNumber * decNumberDivideInteger(decNumber *res, const decNumber *lhs,
+ const decNumber *rhs, decContext *set) {
+ uInt status=0; /* accumulator */
+ decDivideOp(res, lhs, rhs, set, DIVIDEINT, &status);
+ if (status!=0) decStatus(res, status, set);
+ return res;
+ } /* decNumberDivideInteger */
+
+/* ------------------------------------------------------------------ */
+/* decNumberExp -- exponentiation */
+/* */
+/* This computes C = exp(A) */
+/* */
+/* res is C, the result. C may be A */
+/* rhs is A */
+/* set is the context; note that rounding mode has no effect */
+/* */
+/* C must have space for set->digits digits. */
+/* */
+/* Mathematical function restrictions apply (see above); a NaN is */
+/* returned with Invalid_operation if a restriction is violated. */
+/* */
+/* Finite results will always be full precision and Inexact, except */
+/* when A is a zero or -Infinity (giving 1 or 0 respectively). */
+/* */
+/* An Inexact result is rounded using DEC_ROUND_HALF_EVEN; it will */
+/* almost always be correctly rounded, but may be up to 1 ulp in */
+/* error in rare cases. */
+/* ------------------------------------------------------------------ */
+/* This is a wrapper for decExpOp which can handle the slightly wider */
+/* (double) range needed by Ln (which has to be able to calculate */
+/* exp(-a) where a can be the tiniest number (Ntiny). */
+/* ------------------------------------------------------------------ */
+decNumber * decNumberExp(decNumber *res, const decNumber *rhs,
+ decContext *set) {
+ uInt status=0; /* accumulator */
+ #if DECSUBSET
+ decNumber *allocrhs=NULL; /* non-NULL if rounded rhs allocated */
+ #endif
+
+ #if DECCHECK
+ if (decCheckOperands(res, DECUNUSED, rhs, set)) return res;
+ #endif
+
+ /* Check restrictions; these restrictions ensure that if h=8 (see */
+ /* decExpOp) then the result will either overflow or underflow to 0. */
+ /* Other math functions restrict the input range, too, for inverses. */
+ /* If not violated then carry out the operation. */
+ if (!decCheckMath(rhs, set, &status)) do { /* protect allocation */
+ #if DECSUBSET
+ if (!set->extended) {
+ /* reduce operand and set lostDigits status, as needed */
+ if (rhs->digits>set->digits) {
+ allocrhs=decRoundOperand(rhs, set, &status);
+ if (allocrhs==NULL) break;
+ rhs=allocrhs;
+ }
+ }
+ #endif
+ decExpOp(res, rhs, set, &status);
+ } while(0); /* end protected */
+
+ #if DECSUBSET
+ if (allocrhs !=NULL) free(allocrhs); /* drop any storage used */
+ #endif
+ /* apply significant status */
+ if (status!=0) decStatus(res, status, set);
+ #if DECCHECK
+ decCheckInexact(res, set);
+ #endif
+ return res;
+ } /* decNumberExp */
+
+/* ------------------------------------------------------------------ */
+/* decNumberFMA -- fused multiply add */
+/* */
+/* This computes D = (A * B) + C with only one rounding */
+/* */
+/* res is D, the result. D may be A or B or C (e.g., X=FMA(X,X,X)) */
+/* lhs is A */
+/* rhs is B */
+/* fhs is C [far hand side] */
+/* set is the context */
+/* */
+/* Mathematical function restrictions apply (see above); a NaN is */
+/* returned with Invalid_operation if a restriction is violated. */
+/* */
+/* C must have space for set->digits digits. */
+/* ------------------------------------------------------------------ */
+decNumber * decNumberFMA(decNumber *res, const decNumber *lhs,
+ const decNumber *rhs, const decNumber *fhs,
+ decContext *set) {
+ uInt status=0; /* accumulator */
+ decContext dcmul; /* context for the multiplication */
+ uInt needbytes; /* for space calculations */
+ decNumber bufa[D2N(DECBUFFER*2+1)];
+ decNumber *allocbufa=NULL; /* -> allocated bufa, iff allocated */
+ decNumber *acc; /* accumulator pointer */
+ decNumber dzero; /* work */
+
+ #if DECCHECK
+ if (decCheckOperands(res, lhs, rhs, set)) return res;
+ if (decCheckOperands(res, fhs, DECUNUSED, set)) return res;
+ #endif
+
+ do { /* protect allocated storage */
+ #if DECSUBSET
+ if (!set->extended) { /* [undefined if subset] */
+ status|=DEC_Invalid_operation;
+ break;}
+ #endif
+ /* Check math restrictions [these ensure no overflow or underflow] */
+ if ((!decNumberIsSpecial(lhs) && decCheckMath(lhs, set, &status))
+ || (!decNumberIsSpecial(rhs) && decCheckMath(rhs, set, &status))
+ || (!decNumberIsSpecial(fhs) && decCheckMath(fhs, set, &status))) break;
+ /* set up context for multiply */
+ dcmul=*set;
+ dcmul.digits=lhs->digits+rhs->digits; /* just enough */
+ /* [The above may be an over-estimate for subset arithmetic, but that's OK] */
+ dcmul.emax=DEC_MAX_EMAX; /* effectively unbounded .. */
+ dcmul.emin=DEC_MIN_EMIN; /* [thanks to Math restrictions] */
+ /* set up decNumber space to receive the result of the multiply */
+ acc=bufa; /* may fit */
+ needbytes=sizeof(decNumber)+(D2U(dcmul.digits)-1)*sizeof(Unit);
+ if (needbytes>sizeof(bufa)) { /* need malloc space */
+ allocbufa=(decNumber *)malloc(needbytes);
+ if (allocbufa==NULL) { /* hopeless -- abandon */
+ status|=DEC_Insufficient_storage;
+ break;}
+ acc=allocbufa; /* use the allocated space */
+ }
+ /* multiply with extended range and necessary precision */
+ /*printf("emin=%ld\n", dcmul.emin); */
+ decMultiplyOp(acc, lhs, rhs, &dcmul, &status);
+ /* Only Invalid operation (from sNaN or Inf * 0) is possible in */
+ /* status; if either is seen than ignore fhs (in case it is */
+ /* another sNaN) and set acc to NaN unless we had an sNaN */
+ /* [decMultiplyOp leaves that to caller] */
+ /* Note sNaN has to go through addOp to shorten payload if */
+ /* necessary */
+ if ((status&DEC_Invalid_operation)!=0) {
+ if (!(status&DEC_sNaN)) { /* but be true invalid */
+ decNumberZero(res); /* acc not yet set */
+ res->bits=DECNAN;
+ break;
+ }
+ decNumberZero(&dzero); /* make 0 (any non-NaN would do) */
+ fhs=&dzero; /* use that */
+ }
+ #if DECCHECK
+ else { /* multiply was OK */
+ if (status!=0) printf("Status=%08lx after FMA multiply\n", status);
+ }
+ #endif
+ /* add the third operand and result -> res, and all is done */
+ decAddOp(res, acc, fhs, set, 0, &status);
+ } while(0); /* end protected */
+
+ if (allocbufa!=NULL) free(allocbufa); /* drop any storage used */
+ if (status!=0) decStatus(res, status, set);
+ #if DECCHECK
+ decCheckInexact(res, set);
+ #endif
+ return res;
+ } /* decNumberFMA */
+
+/* ------------------------------------------------------------------ */
+/* decNumberInvert -- invert a Number, digitwise */
+/* */
+/* This computes C = ~A */
+/* */
+/* res is C, the result. C may be A (e.g., X=~X) */
+/* rhs is A */
+/* set is the context (used for result length and error report) */
+/* */
+/* C must have space for set->digits digits. */
+/* */
+/* Logical function restrictions apply (see above); a NaN is */
+/* returned with Invalid_operation if a restriction is violated. */
+/* ------------------------------------------------------------------ */
+decNumber * decNumberInvert(decNumber *res, const decNumber *rhs,
+ decContext *set) {
+ const Unit *ua, *msua; /* -> operand and its msu */
+ Unit *uc, *msuc; /* -> result and its msu */
+ Int msudigs; /* digits in res msu */
+ #if DECCHECK
+ if (decCheckOperands(res, DECUNUSED, rhs, set)) return res;
+ #endif
+
+ if (rhs->exponent!=0 || decNumberIsSpecial(rhs) || decNumberIsNegative(rhs)) {
+ decStatus(res, DEC_Invalid_operation, set);
+ return res;
+ }
+ /* operand is valid */
+ ua=rhs->lsu; /* bottom-up */
+ uc=res->lsu; /* .. */
+ msua=ua+D2U(rhs->digits)-1; /* -> msu of rhs */
+ msuc=uc+D2U(set->digits)-1; /* -> msu of result */
+ msudigs=MSUDIGITS(set->digits); /* [faster than remainder] */
+ for (; uc<=msuc; ua++, uc++) { /* Unit loop */
+ Unit a; /* extract unit */
+ Int i, j; /* work */
+ if (ua>msua) a=0;
+ else a=*ua;
+ *uc=0; /* can now write back */
+ /* always need to examine all bits in rhs */
+ /* This loop could be unrolled and/or use BIN2BCD tables */
+ for (i=0; i<DECDPUN; i++) {
+ if ((~a)&1) *uc=*uc+(Unit)powers[i]; /* effect INVERT */
+ j=a%10;
+ a=a/10;
+ if (j>1) {
+ decStatus(res, DEC_Invalid_operation, set);
+ return res;
+ }
+ if (uc==msuc && i==msudigs-1) break; /* just did final digit */
+ } /* each digit */
+ } /* each unit */
+ /* [here uc-1 is the msu of the result] */
+ res->digits=decGetDigits(res->lsu, uc-res->lsu);
+ res->exponent=0; /* integer */
+ res->bits=0; /* sign=0 */
+ return res; /* [no status to set] */
+ } /* decNumberInvert */
+
+/* ------------------------------------------------------------------ */
+/* decNumberLn -- natural logarithm */
+/* */
+/* This computes C = ln(A) */
+/* */
+/* res is C, the result. C may be A */
+/* rhs is A */
+/* set is the context; note that rounding mode has no effect */
+/* */
+/* C must have space for set->digits digits. */
+/* */
+/* Notable cases: */
+/* A<0 -> Invalid */
+/* A=0 -> -Infinity (Exact) */
+/* A=+Infinity -> +Infinity (Exact) */
+/* A=1 exactly -> 0 (Exact) */
+/* */
+/* Mathematical function restrictions apply (see above); a NaN is */
+/* returned with Invalid_operation if a restriction is violated. */
+/* */
+/* An Inexact result is rounded using DEC_ROUND_HALF_EVEN; it will */
+/* almost always be correctly rounded, but may be up to 1 ulp in */
+/* error in rare cases. */
+/* ------------------------------------------------------------------ */
+/* This is a wrapper for decLnOp which can handle the slightly wider */
+/* (+11) range needed by Ln, Log10, etc. (which may have to be able */
+/* to calculate at p+e+2). */
+/* ------------------------------------------------------------------ */
+decNumber * decNumberLn(decNumber *res, const decNumber *rhs,
+ decContext *set) {
+ uInt status=0; /* accumulator */
+ #if DECSUBSET
+ decNumber *allocrhs=NULL; /* non-NULL if rounded rhs allocated */
+ #endif
+
+ #if DECCHECK
+ if (decCheckOperands(res, DECUNUSED, rhs, set)) return res;
+ #endif
+
+ /* Check restrictions; this is a math function; if not violated */
+ /* then carry out the operation. */
+ if (!decCheckMath(rhs, set, &status)) do { /* protect allocation */
+ #if DECSUBSET
+ if (!set->extended) {
+ /* reduce operand and set lostDigits status, as needed */
+ if (rhs->digits>set->digits) {
+ allocrhs=decRoundOperand(rhs, set, &status);
+ if (allocrhs==NULL) break;
+ rhs=allocrhs;
+ }
+ /* special check in subset for rhs=0 */
+ if (ISZERO(rhs)) { /* +/- zeros -> error */
+ status|=DEC_Invalid_operation;
+ break;}
+ } /* extended=0 */
+ #endif
+ decLnOp(res, rhs, set, &status);
+ } while(0); /* end protected */
+
+ #if DECSUBSET
+ if (allocrhs !=NULL) free(allocrhs); /* drop any storage used */
+ #endif
+ /* apply significant status */
+ if (status!=0) decStatus(res, status, set);
+ #if DECCHECK
+ decCheckInexact(res, set);
+ #endif
+ return res;
+ } /* decNumberLn */
+
+/* ------------------------------------------------------------------ */
+/* decNumberLogB - get adjusted exponent, by 754r rules */
+/* */
+/* This computes C = adjustedexponent(A) */
+/* */
+/* res is C, the result. C may be A */
+/* rhs is A */
+/* set is the context, used only for digits and status */
+/* */
+/* C must have space for 10 digits (A might have 10**9 digits and */
+/* an exponent of +999999999, or one digit and an exponent of */
+/* -1999999999). */
+/* */
+/* This returns the adjusted exponent of A after (in theory) padding */
+/* with zeros on the right to set->digits digits while keeping the */
+/* same value. The exponent is not limited by emin/emax. */
+/* */
+/* Notable cases: */
+/* A<0 -> Use |A| */
+/* A=0 -> -Infinity (Division by zero) */
+/* A=Infinite -> +Infinity (Exact) */
+/* A=1 exactly -> 0 (Exact) */
+/* NaNs are propagated as usual */
+/* ------------------------------------------------------------------ */
+decNumber * decNumberLogB(decNumber *res, const decNumber *rhs,
+ decContext *set) {
+ uInt status=0; /* accumulator */
+
+ #if DECCHECK
+ if (decCheckOperands(res, DECUNUSED, rhs, set)) return res;
+ #endif
+
+ /* NaNs as usual; Infinities return +Infinity; 0->oops */
+ if (decNumberIsNaN(rhs)) decNaNs(res, rhs, NULL, set, &status);
+ else if (decNumberIsInfinite(rhs)) decNumberCopyAbs(res, rhs);
+ else if (decNumberIsZero(rhs)) {
+ decNumberZero(res); /* prepare for Infinity */
+ res->bits=DECNEG|DECINF; /* -Infinity */
+ status|=DEC_Division_by_zero; /* as per 754r */
+ }
+ else { /* finite non-zero */
+ Int ae=rhs->exponent+rhs->digits-1; /* adjusted exponent */
+ decNumberFromInt32(res, ae); /* lay it out */
+ }
+
+ if (status!=0) decStatus(res, status, set);
+ return res;
+ } /* decNumberLogB */
+
+/* ------------------------------------------------------------------ */
+/* decNumberLog10 -- logarithm in base 10 */
+/* */
+/* This computes C = log10(A) */
+/* */
+/* res is C, the result. C may be A */
+/* rhs is A */
+/* set is the context; note that rounding mode has no effect */
+/* */
+/* C must have space for set->digits digits. */
+/* */
+/* Notable cases: */
+/* A<0 -> Invalid */
+/* A=0 -> -Infinity (Exact) */
+/* A=+Infinity -> +Infinity (Exact) */
+/* A=10**n (if n is an integer) -> n (Exact) */
+/* */
+/* Mathematical function restrictions apply (see above); a NaN is */
+/* returned with Invalid_operation if a restriction is violated. */
+/* */
+/* An Inexact result is rounded using DEC_ROUND_HALF_EVEN; it will */
+/* almost always be correctly rounded, but may be up to 1 ulp in */
+/* error in rare cases. */
+/* ------------------------------------------------------------------ */
+/* This calculates ln(A)/ln(10) using appropriate precision. For */
+/* ln(A) this is the max(p, rhs->digits + t) + 3, where p is the */
+/* requested digits and t is the number of digits in the exponent */
+/* (maximum 6). For ln(10) it is p + 3; this is often handled by the */
+/* fastpath in decLnOp. The final division is done to the requested */
+/* precision. */
+/* ------------------------------------------------------------------ */
+decNumber * decNumberLog10(decNumber *res, const decNumber *rhs,
+ decContext *set) {
+ uInt status=0, ignore=0; /* status accumulators */
+ uInt needbytes; /* for space calculations */
+ Int p; /* working precision */
+ Int t; /* digits in exponent of A */
+
+ /* buffers for a and b working decimals */
+ /* (adjustment calculator, same size) */
+ decNumber bufa[D2N(DECBUFFER+2)];
+ decNumber *allocbufa=NULL; /* -> allocated bufa, iff allocated */
+ decNumber *a=bufa; /* temporary a */
+ decNumber bufb[D2N(DECBUFFER+2)];
+ decNumber *allocbufb=NULL; /* -> allocated bufb, iff allocated */
+ decNumber *b=bufb; /* temporary b */
+ decNumber bufw[D2N(10)]; /* working 2-10 digit number */
+ decNumber *w=bufw; /* .. */
+ #if DECSUBSET
+ decNumber *allocrhs=NULL; /* non-NULL if rounded rhs allocated */
+ #endif
+
+ decContext aset; /* working context */
+
+ #if DECCHECK
+ if (decCheckOperands(res, DECUNUSED, rhs, set)) return res;
+ #endif
+
+ /* Check restrictions; this is a math function; if not violated */
+ /* then carry out the operation. */
+ if (!decCheckMath(rhs, set, &status)) do { /* protect malloc */
+ #if DECSUBSET
+ if (!set->extended) {
+ /* reduce operand and set lostDigits status, as needed */
+ if (rhs->digits>set->digits) {
+ allocrhs=decRoundOperand(rhs, set, &status);
+ if (allocrhs==NULL) break;
+ rhs=allocrhs;
+ }
+ /* special check in subset for rhs=0 */
+ if (ISZERO(rhs)) { /* +/- zeros -> error */
+ status|=DEC_Invalid_operation;
+ break;}
+ } /* extended=0 */
+ #endif
+
+ decContextDefault(&aset, DEC_INIT_DECIMAL64); /* clean context */
+
+ /* handle exact powers of 10; only check if +ve finite */
+ if (!(rhs->bits&(DECNEG|DECSPECIAL)) && !ISZERO(rhs)) {
+ Int residue=0; /* (no residue) */
+ uInt copystat=0; /* clean status */
+
+ /* round to a single digit... */
+ aset.digits=1;
+ decCopyFit(w, rhs, &aset, &residue, &copystat); /* copy & shorten */
+ /* if exact and the digit is 1, rhs is a power of 10 */
+ if (!(copystat&DEC_Inexact) && w->lsu[0]==1) {
+ /* the exponent, conveniently, is the power of 10; making */
+ /* this the result needs a little care as it might not fit, */
+ /* so first convert it into the working number, and then move */
+ /* to res */
+ decNumberFromInt32(w, w->exponent);
+ residue=0;
+ decCopyFit(res, w, set, &residue, &status); /* copy & round */
+ decFinish(res, set, &residue, &status); /* cleanup/set flags */
+ break;
+ } /* not a power of 10 */
+ } /* not a candidate for exact */
+
+ /* simplify the information-content calculation to use 'total */
+ /* number of digits in a, including exponent' as compared to the */
+ /* requested digits, as increasing this will only rarely cost an */
+ /* iteration in ln(a) anyway */
+ t=6; /* it can never be >6 */
+
+ /* allocate space when needed... */
+ p=(rhs->digits+t>set->digits?rhs->digits+t:set->digits)+3;
+ needbytes=sizeof(decNumber)+(D2U(p)-1)*sizeof(Unit);
+ if (needbytes>sizeof(bufa)) { /* need malloc space */
+ allocbufa=(decNumber *)malloc(needbytes);
+ if (allocbufa==NULL) { /* hopeless -- abandon */
+ status|=DEC_Insufficient_storage;
+ break;}
+ a=allocbufa; /* use the allocated space */
+ }
+ aset.digits=p; /* as calculated */
+ aset.emax=DEC_MAX_MATH; /* usual bounds */
+ aset.emin=-DEC_MAX_MATH; /* .. */
+ aset.clamp=0; /* and no concrete format */
+ decLnOp(a, rhs, &aset, &status); /* a=ln(rhs) */
+
+ /* skip the division if the result so far is infinite, NaN, or */
+ /* zero, or there was an error; note NaN from sNaN needs copy */
+ if (status&DEC_NaNs && !(status&DEC_sNaN)) break;
+ if (a->bits&DECSPECIAL || ISZERO(a)) {
+ decNumberCopy(res, a); /* [will fit] */
+ break;}
+
+ /* for ln(10) an extra 3 digits of precision are needed */
+ p=set->digits+3;
+ needbytes=sizeof(decNumber)+(D2U(p)-1)*sizeof(Unit);
+ if (needbytes>sizeof(bufb)) { /* need malloc space */
+ allocbufb=(decNumber *)malloc(needbytes);
+ if (allocbufb==NULL) { /* hopeless -- abandon */
+ status|=DEC_Insufficient_storage;
+ break;}
+ b=allocbufb; /* use the allocated space */
+ }
+ decNumberZero(w); /* set up 10... */
+ #if DECDPUN==1
+ w->lsu[1]=1; w->lsu[0]=0; /* .. */
+ #else
+ w->lsu[0]=10; /* .. */
+ #endif
+ w->digits=2; /* .. */
+
+ aset.digits=p;
+ decLnOp(b, w, &aset, &ignore); /* b=ln(10) */
+
+ aset.digits=set->digits; /* for final divide */
+ decDivideOp(res, a, b, &aset, DIVIDE, &status); /* into result */
+ } while(0); /* [for break] */
+
+ if (allocbufa!=NULL) free(allocbufa); /* drop any storage used */
+ if (allocbufb!=NULL) free(allocbufb); /* .. */
+ #if DECSUBSET
+ if (allocrhs !=NULL) free(allocrhs); /* .. */
+ #endif
+ /* apply significant status */
+ if (status!=0) decStatus(res, status, set);
+ #if DECCHECK
+ decCheckInexact(res, set);
+ #endif
+ return res;
+ } /* decNumberLog10 */
+
+/* ------------------------------------------------------------------ */
+/* decNumberMax -- compare two Numbers and return the maximum */
+/* */
+/* This computes C = A ? B, returning the maximum by 754R rules */
+/* */
+/* res is C, the result. C may be A and/or B (e.g., X=X?X) */
+/* lhs is A */
+/* rhs is B */
+/* set is the context */
+/* */
+/* C must have space for set->digits digits. */
+/* ------------------------------------------------------------------ */
+decNumber * decNumberMax(decNumber *res, const decNumber *lhs,
+ const decNumber *rhs, decContext *set) {
+ uInt status=0; /* accumulator */
+ decCompareOp(res, lhs, rhs, set, COMPMAX, &status);
+ if (status!=0) decStatus(res, status, set);
+ #if DECCHECK
+ decCheckInexact(res, set);
+ #endif
+ return res;
+ } /* decNumberMax */
+
+/* ------------------------------------------------------------------ */
+/* decNumberMaxMag -- compare and return the maximum by magnitude */
+/* */
+/* This computes C = A ? B, returning the maximum by 754R rules */
+/* */
+/* res is C, the result. C may be A and/or B (e.g., X=X?X) */
+/* lhs is A */
+/* rhs is B */
+/* set is the context */
+/* */
+/* C must have space for set->digits digits. */
+/* ------------------------------------------------------------------ */
+decNumber * decNumberMaxMag(decNumber *res, const decNumber *lhs,
+ const decNumber *rhs, decContext *set) {
+ uInt status=0; /* accumulator */
+ decCompareOp(res, lhs, rhs, set, COMPMAXMAG, &status);
+ if (status!=0) decStatus(res, status, set);
+ #if DECCHECK
+ decCheckInexact(res, set);
+ #endif
+ return res;
+ } /* decNumberMaxMag */
+
+/* ------------------------------------------------------------------ */
+/* decNumberMin -- compare two Numbers and return the minimum */
+/* */
+/* This computes C = A ? B, returning the minimum by 754R rules */
+/* */
+/* res is C, the result. C may be A and/or B (e.g., X=X?X) */
+/* lhs is A */
+/* rhs is B */
+/* set is the context */
+/* */
+/* C must have space for set->digits digits. */
+/* ------------------------------------------------------------------ */
+decNumber * decNumberMin(decNumber *res, const decNumber *lhs,
+ const decNumber *rhs, decContext *set) {
+ uInt status=0; /* accumulator */
+ decCompareOp(res, lhs, rhs, set, COMPMIN, &status);
+ if (status!=0) decStatus(res, status, set);
+ #if DECCHECK
+ decCheckInexact(res, set);
+ #endif
+ return res;
+ } /* decNumberMin */
+
+/* ------------------------------------------------------------------ */
+/* decNumberMinMag -- compare and return the minimum by magnitude */
+/* */
+/* This computes C = A ? B, returning the minimum by 754R rules */
+/* */
+/* res is C, the result. C may be A and/or B (e.g., X=X?X) */
+/* lhs is A */
+/* rhs is B */
+/* set is the context */
+/* */
+/* C must have space for set->digits digits. */
+/* ------------------------------------------------------------------ */
+decNumber * decNumberMinMag(decNumber *res, const decNumber *lhs,
+ const decNumber *rhs, decContext *set) {
+ uInt status=0; /* accumulator */
+ decCompareOp(res, lhs, rhs, set, COMPMINMAG, &status);
+ if (status!=0) decStatus(res, status, set);
+ #if DECCHECK
+ decCheckInexact(res, set);
+ #endif
+ return res;
+ } /* decNumberMinMag */
+
+/* ------------------------------------------------------------------ */
+/* decNumberMinus -- prefix minus operator */
+/* */
+/* This computes C = 0 - A */
+/* */
+/* res is C, the result. C may be A */
+/* rhs is A */
+/* set is the context */
+/* */
+/* See also decNumberCopyNegate for a quiet bitwise version of this. */
+/* C must have space for set->digits digits. */
+/* ------------------------------------------------------------------ */
+/* Simply use AddOp for the subtract, which will do the necessary. */
+/* ------------------------------------------------------------------ */
+decNumber * decNumberMinus(decNumber *res, const decNumber *rhs,
+ decContext *set) {
+ decNumber dzero;
+ uInt status=0; /* accumulator */
+
+ #if DECCHECK
+ if (decCheckOperands(res, DECUNUSED, rhs, set)) return res;
+ #endif
+
+ decNumberZero(&dzero); /* make 0 */
+ dzero.exponent=rhs->exponent; /* [no coefficient expansion] */
+ decAddOp(res, &dzero, rhs, set, DECNEG, &status);
+ if (status!=0) decStatus(res, status, set);
+ #if DECCHECK
+ decCheckInexact(res, set);
+ #endif
+ return res;
+ } /* decNumberMinus */
+
+/* ------------------------------------------------------------------ */
+/* decNumberNextMinus -- next towards -Infinity */
+/* */
+/* This computes C = A - infinitesimal, rounded towards -Infinity */
+/* */
+/* res is C, the result. C may be A */
+/* rhs is A */
+/* set is the context */
+/* */
+/* This is a generalization of 754r NextDown. */
+/* ------------------------------------------------------------------ */
+decNumber * decNumberNextMinus(decNumber *res, const decNumber *rhs,
+ decContext *set) {
+ decNumber dtiny; /* constant */
+ decContext workset=*set; /* work */
+ uInt status=0; /* accumulator */
+ #if DECCHECK
+ if (decCheckOperands(res, DECUNUSED, rhs, set)) return res;
+ #endif
+
+ /* +Infinity is the special case */
+ if ((rhs->bits&(DECINF|DECNEG))==DECINF) {
+ decSetMaxValue(res, set); /* is +ve */
+ /* there is no status to set */
+ return res;
+ }
+ decNumberZero(&dtiny); /* start with 0 */
+ dtiny.lsu[0]=1; /* make number that is .. */
+ dtiny.exponent=DEC_MIN_EMIN-1; /* .. smaller than tiniest */
+ workset.round=DEC_ROUND_FLOOR;
+ decAddOp(res, rhs, &dtiny, &workset, DECNEG, &status);
+ status&=DEC_Invalid_operation|DEC_sNaN; /* only sNaN Invalid please */
+ if (status!=0) decStatus(res, status, set);
+ return res;
+ } /* decNumberNextMinus */
+
+/* ------------------------------------------------------------------ */
+/* decNumberNextPlus -- next towards +Infinity */
+/* */
+/* This computes C = A + infinitesimal, rounded towards +Infinity */
+/* */
+/* res is C, the result. C may be A */
+/* rhs is A */
+/* set is the context */
+/* */
+/* This is a generalization of 754r NextUp. */
+/* ------------------------------------------------------------------ */
+decNumber * decNumberNextPlus(decNumber *res, const decNumber *rhs,
+ decContext *set) {
+ decNumber dtiny; /* constant */
+ decContext workset=*set; /* work */
+ uInt status=0; /* accumulator */
+ #if DECCHECK
+ if (decCheckOperands(res, DECUNUSED, rhs, set)) return res;
+ #endif
+
+ /* -Infinity is the special case */
+ if ((rhs->bits&(DECINF|DECNEG))==(DECINF|DECNEG)) {
+ decSetMaxValue(res, set);
+ res->bits=DECNEG; /* negative */
+ /* there is no status to set */
+ return res;
+ }
+ decNumberZero(&dtiny); /* start with 0 */
+ dtiny.lsu[0]=1; /* make number that is .. */
+ dtiny.exponent=DEC_MIN_EMIN-1; /* .. smaller than tiniest */
+ workset.round=DEC_ROUND_CEILING;
+ decAddOp(res, rhs, &dtiny, &workset, 0, &status);
+ status&=DEC_Invalid_operation|DEC_sNaN; /* only sNaN Invalid please */
+ if (status!=0) decStatus(res, status, set);
+ return res;
+ } /* decNumberNextPlus */
+
+/* ------------------------------------------------------------------ */
+/* decNumberNextToward -- next towards rhs */
+/* */
+/* This computes C = A +/- infinitesimal, rounded towards */
+/* +/-Infinity in the direction of B, as per 754r nextafter rules */
+/* */
+/* res is C, the result. C may be A or B. */
+/* lhs is A */
+/* rhs is B */
+/* set is the context */
+/* */
+/* This is a generalization of 754r NextAfter. */
+/* ------------------------------------------------------------------ */
+decNumber * decNumberNextToward(decNumber *res, const decNumber *lhs,
+ const decNumber *rhs, decContext *set) {
+ decNumber dtiny; /* constant */
+ decContext workset=*set; /* work */
+ Int result; /* .. */
+ uInt status=0; /* accumulator */
+ #if DECCHECK
+ if (decCheckOperands(res, lhs, rhs, set)) return res;
+ #endif
+
+ if (decNumberIsNaN(lhs) || decNumberIsNaN(rhs)) {
+ decNaNs(res, lhs, rhs, set, &status);
+ }
+ else { /* Is numeric, so no chance of sNaN Invalid, etc. */
+ result=decCompare(lhs, rhs, 0); /* sign matters */
+ if (result==BADINT) status|=DEC_Insufficient_storage; /* rare */
+ else { /* valid compare */
+ if (result==0) decNumberCopySign(res, lhs, rhs); /* easy */
+ else { /* differ: need NextPlus or NextMinus */
+ uByte sub; /* add or subtract */
+ if (result<0) { /* lhs<rhs, do nextplus */
+ /* -Infinity is the special case */
+ if ((lhs->bits&(DECINF|DECNEG))==(DECINF|DECNEG)) {
+ decSetMaxValue(res, set);
+ res->bits=DECNEG; /* negative */
+ return res; /* there is no status to set */
+ }
+ workset.round=DEC_ROUND_CEILING;
+ sub=0; /* add, please */
+ } /* plus */
+ else { /* lhs>rhs, do nextminus */
+ /* +Infinity is the special case */
+ if ((lhs->bits&(DECINF|DECNEG))==DECINF) {
+ decSetMaxValue(res, set);
+ return res; /* there is no status to set */
+ }
+ workset.round=DEC_ROUND_FLOOR;
+ sub=DECNEG; /* subtract, please */
+ } /* minus */
+ decNumberZero(&dtiny); /* start with 0 */
+ dtiny.lsu[0]=1; /* make number that is .. */
+ dtiny.exponent=DEC_MIN_EMIN-1; /* .. smaller than tiniest */
+ decAddOp(res, lhs, &dtiny, &workset, sub, &status); /* + or - */
+ /* turn off exceptions if the result is a normal number */
+ /* (including Nmin), otherwise let all status through */
+ if (decNumberIsNormal(res, set)) status=0;
+ } /* unequal */
+ } /* compare OK */
+ } /* numeric */
+ if (status!=0) decStatus(res, status, set);
+ return res;
+ } /* decNumberNextToward */
+
+/* ------------------------------------------------------------------ */
+/* decNumberOr -- OR two Numbers, digitwise */
+/* */
+/* This computes C = A | B */
+/* */
+/* res is C, the result. C may be A and/or B (e.g., X=X|X) */
+/* lhs is A */
+/* rhs is B */
+/* set is the context (used for result length and error report) */
+/* */
+/* C must have space for set->digits digits. */
+/* */
+/* Logical function restrictions apply (see above); a NaN is */
+/* returned with Invalid_operation if a restriction is violated. */
+/* ------------------------------------------------------------------ */
+decNumber * decNumberOr(decNumber *res, const decNumber *lhs,
+ const decNumber *rhs, decContext *set) {
+ const Unit *ua, *ub; /* -> operands */
+ const Unit *msua, *msub; /* -> operand msus */
+ Unit *uc, *msuc; /* -> result and its msu */
+ Int msudigs; /* digits in res msu */
+ #if DECCHECK
+ if (decCheckOperands(res, lhs, rhs, set)) return res;
+ #endif
+
+ if (lhs->exponent!=0 || decNumberIsSpecial(lhs) || decNumberIsNegative(lhs)
+ || rhs->exponent!=0 || decNumberIsSpecial(rhs) || decNumberIsNegative(rhs)) {
+ decStatus(res, DEC_Invalid_operation, set);
+ return res;
+ }
+ /* operands are valid */
+ ua=lhs->lsu; /* bottom-up */
+ ub=rhs->lsu; /* .. */
+ uc=res->lsu; /* .. */
+ msua=ua+D2U(lhs->digits)-1; /* -> msu of lhs */
+ msub=ub+D2U(rhs->digits)-1; /* -> msu of rhs */
+ msuc=uc+D2U(set->digits)-1; /* -> msu of result */
+ msudigs=MSUDIGITS(set->digits); /* [faster than remainder] */
+ for (; uc<=msuc; ua++, ub++, uc++) { /* Unit loop */
+ Unit a, b; /* extract units */
+ if (ua>msua) a=0;
+ else a=*ua;
+ if (ub>msub) b=0;
+ else b=*ub;
+ *uc=0; /* can now write back */
+ if (a|b) { /* maybe 1 bits to examine */
+ Int i, j;
+ /* This loop could be unrolled and/or use BIN2BCD tables */
+ for (i=0; i<DECDPUN; i++) {
+ if ((a|b)&1) *uc=*uc+(Unit)powers[i]; /* effect OR */
+ j=a%10;
+ a=a/10;
+ j|=b%10;
+ b=b/10;
+ if (j>1) {
+ decStatus(res, DEC_Invalid_operation, set);
+ return res;
+ }
+ if (uc==msuc && i==msudigs-1) break; /* just did final digit */
+ } /* each digit */
+ } /* non-zero */
+ } /* each unit */
+ /* [here uc-1 is the msu of the result] */
+ res->digits=decGetDigits(res->lsu, uc-res->lsu);
+ res->exponent=0; /* integer */
+ res->bits=0; /* sign=0 */
+ return res; /* [no status to set] */
+ } /* decNumberOr */
+
+/* ------------------------------------------------------------------ */
+/* decNumberPlus -- prefix plus operator */
+/* */
+/* This computes C = 0 + A */
+/* */
+/* res is C, the result. C may be A */
+/* rhs is A */
+/* set is the context */
+/* */
+/* See also decNumberCopy for a quiet bitwise version of this. */
+/* C must have space for set->digits digits. */
+/* ------------------------------------------------------------------ */
+/* This simply uses AddOp; Add will take fast path after preparing A. */
+/* Performance is a concern here, as this routine is often used to */
+/* check operands and apply rounding and overflow/underflow testing. */
+/* ------------------------------------------------------------------ */
+decNumber * decNumberPlus(decNumber *res, const decNumber *rhs,
+ decContext *set) {
+ decNumber dzero;
+ uInt status=0; /* accumulator */
+ #if DECCHECK
+ if (decCheckOperands(res, DECUNUSED, rhs, set)) return res;
+ #endif
+
+ decNumberZero(&dzero); /* make 0 */
+ dzero.exponent=rhs->exponent; /* [no coefficient expansion] */
+ decAddOp(res, &dzero, rhs, set, 0, &status);
+ if (status!=0) decStatus(res, status, set);
+ #if DECCHECK
+ decCheckInexact(res, set);
+ #endif
+ return res;
+ } /* decNumberPlus */
+
+/* ------------------------------------------------------------------ */
+/* decNumberMultiply -- multiply two Numbers */
+/* */
+/* This computes C = A x B */
+/* */
+/* res is C, the result. C may be A and/or B (e.g., X=X+X) */
+/* lhs is A */
+/* rhs is B */
+/* set is the context */
+/* */
+/* C must have space for set->digits digits. */
+/* ------------------------------------------------------------------ */
+decNumber * decNumberMultiply(decNumber *res, const decNumber *lhs,
+ const decNumber *rhs, decContext *set) {
+ uInt status=0; /* accumulator */
+ decMultiplyOp(res, lhs, rhs, set, &status);
+ if (status!=0) decStatus(res, status, set);
+ #if DECCHECK
+ decCheckInexact(res, set);
+ #endif
+ return res;
+ } /* decNumberMultiply */
+
+/* ------------------------------------------------------------------ */
+/* decNumberPower -- raise a number to a power */
+/* */
+/* This computes C = A ** B */
+/* */
+/* res is C, the result. C may be A and/or B (e.g., X=X**X) */
+/* lhs is A */
+/* rhs is B */
+/* set is the context */
+/* */
+/* C must have space for set->digits digits. */
+/* */
+/* Mathematical function restrictions apply (see above); a NaN is */
+/* returned with Invalid_operation if a restriction is violated. */
+/* */
+/* However, if 1999999997<=B<=999999999 and B is an integer then the */
+/* restrictions on A and the context are relaxed to the usual bounds, */
+/* for compatibility with the earlier (integer power only) version */
+/* of this function. */
+/* */
+/* When B is an integer, the result may be exact, even if rounded. */
+/* */
+/* The final result is rounded according to the context; it will */
+/* almost always be correctly rounded, but may be up to 1 ulp in */
+/* error in rare cases. */
+/* ------------------------------------------------------------------ */
+decNumber * decNumberPower(decNumber *res, const decNumber *lhs,
+ const decNumber *rhs, decContext *set) {
+ #if DECSUBSET
+ decNumber *alloclhs=NULL; /* non-NULL if rounded lhs allocated */
+ decNumber *allocrhs=NULL; /* .., rhs */
+ #endif
+ decNumber *allocdac=NULL; /* -> allocated acc buffer, iff used */
+ decNumber *allocinv=NULL; /* -> allocated 1/x buffer, iff used */
+ Int reqdigits=set->digits; /* requested DIGITS */
+ Int n; /* rhs in binary */
+ Flag rhsint=0; /* 1 if rhs is an integer */
+ Flag useint=0; /* 1 if can use integer calculation */
+ Flag isoddint=0; /* 1 if rhs is an integer and odd */
+ Int i; /* work */
+ #if DECSUBSET
+ Int dropped; /* .. */
+ #endif
+ uInt needbytes; /* buffer size needed */
+ Flag seenbit; /* seen a bit while powering */
+ Int residue=0; /* rounding residue */
+ uInt status=0; /* accumulators */
+ uByte bits=0; /* result sign if errors */
+ decContext aset; /* working context */
+ decNumber dnOne; /* work value 1... */
+ /* local accumulator buffer [a decNumber, with digits+elength+1 digits] */
+ decNumber dacbuff[D2N(DECBUFFER+9)];
+ decNumber *dac=dacbuff; /* -> result accumulator */
+ /* same again for possible 1/lhs calculation */
+ decNumber invbuff[D2N(DECBUFFER+9)];
+
+ #if DECCHECK
+ if (decCheckOperands(res, lhs, rhs, set)) return res;
+ #endif
+
+ do { /* protect allocated storage */
+ #if DECSUBSET
+ if (!set->extended) { /* reduce operands and set status, as needed */
+ if (lhs->digits>reqdigits) {
+ alloclhs=decRoundOperand(lhs, set, &status);
+ if (alloclhs==NULL) break;
+ lhs=alloclhs;
+ }
+ if (rhs->digits>reqdigits) {
+ allocrhs=decRoundOperand(rhs, set, &status);
+ if (allocrhs==NULL) break;
+ rhs=allocrhs;
+ }
+ }
+ #endif
+ /* [following code does not require input rounding] */
+
+ /* handle NaNs and rhs Infinity (lhs infinity is harder) */
+ if (SPECIALARGS) {
+ if (decNumberIsNaN(lhs) || decNumberIsNaN(rhs)) { /* NaNs */
+ decNaNs(res, lhs, rhs, set, &status);
+ break;}
+ if (decNumberIsInfinite(rhs)) { /* rhs Infinity */
+ Flag rhsneg=rhs->bits&DECNEG; /* save rhs sign */
+ if (decNumberIsNegative(lhs) /* lhs<0 */
+ && !decNumberIsZero(lhs)) /* .. */
+ status|=DEC_Invalid_operation;
+ else { /* lhs >=0 */
+ decNumberZero(&dnOne); /* set up 1 */
+ dnOne.lsu[0]=1;
+ decNumberCompare(dac, lhs, &dnOne, set); /* lhs ? 1 */
+ decNumberZero(res); /* prepare for 0/1/Infinity */
+ if (decNumberIsNegative(dac)) { /* lhs<1 */
+ if (rhsneg) res->bits|=DECINF; /* +Infinity [else is +0] */
+ }
+ else if (dac->lsu[0]==0) { /* lhs=1 */
+ /* 1**Infinity is inexact, so return fully-padded 1.0000 */
+ Int shift=set->digits-1;
+ *res->lsu=1; /* was 0, make int 1 */
+ res->digits=decShiftToMost(res->lsu, 1, shift);
+ res->exponent=-shift; /* make 1.0000... */
+ status|=DEC_Inexact|DEC_Rounded; /* deemed inexact */
+ }
+ else { /* lhs>1 */
+ if (!rhsneg) res->bits|=DECINF; /* +Infinity [else is +0] */
+ }
+ } /* lhs>=0 */
+ break;}
+ /* [lhs infinity drops through] */
+ } /* specials */
+
+ /* Original rhs may be an integer that fits and is in range */
+ n=decGetInt(rhs);
+ if (n!=BADINT) { /* it is an integer */
+ rhsint=1; /* record the fact for 1**n */
+ isoddint=(Flag)n&1; /* [works even if big] */
+ if (n!=BIGEVEN && n!=BIGODD) /* can use integer path? */
+ useint=1; /* looks good */
+ }
+
+ if (decNumberIsNegative(lhs) /* -x .. */
+ && isoddint) bits=DECNEG; /* .. to an odd power */
+
+ /* handle LHS infinity */
+ if (decNumberIsInfinite(lhs)) { /* [NaNs already handled] */
+ uByte rbits=rhs->bits; /* save */
+ decNumberZero(res); /* prepare */
+ if (n==0) *res->lsu=1; /* [-]Inf**0 => 1 */
+ else {
+ /* -Inf**nonint -> error */
+ if (!rhsint && decNumberIsNegative(lhs)) {
+ status|=DEC_Invalid_operation; /* -Inf**nonint is error */
+ break;}
+ if (!(rbits & DECNEG)) bits|=DECINF; /* was not a **-n */
+ /* [otherwise will be 0 or -0] */
+ res->bits=bits;
+ }
+ break;}
+
+ /* similarly handle LHS zero */
+ if (decNumberIsZero(lhs)) {
+ if (n==0) { /* 0**0 => Error */
+ #if DECSUBSET
+ if (!set->extended) { /* [unless subset] */
+ decNumberZero(res);
+ *res->lsu=1; /* return 1 */
+ break;}
+ #endif
+ status|=DEC_Invalid_operation;
+ }
+ else { /* 0**x */
+ uByte rbits=rhs->bits; /* save */
+ if (rbits & DECNEG) { /* was a 0**(-n) */
+ #if DECSUBSET
+ if (!set->extended) { /* [bad if subset] */
+ status|=DEC_Invalid_operation;
+ break;}
+ #endif
+ bits|=DECINF;
+ }
+ decNumberZero(res); /* prepare */
+ /* [otherwise will be 0 or -0] */
+ res->bits=bits;
+ }
+ break;}
+
+ /* here both lhs and rhs are finite; rhs==0 is handled in the */
+ /* integer path. Next handle the non-integer cases */
+ if (!useint) { /* non-integral rhs */
+ /* any -ve lhs is bad, as is either operand or context out of */
+ /* bounds */
+ if (decNumberIsNegative(lhs)) {
+ status|=DEC_Invalid_operation;
+ break;}
+ if (decCheckMath(lhs, set, &status)
+ || decCheckMath(rhs, set, &status)) break; /* variable status */
+
+ decContextDefault(&aset, DEC_INIT_DECIMAL64); /* clean context */
+ aset.emax=DEC_MAX_MATH; /* usual bounds */
+ aset.emin=-DEC_MAX_MATH; /* .. */
+ aset.clamp=0; /* and no concrete format */
+
+ /* calculate the result using exp(ln(lhs)*rhs), which can */
+ /* all be done into the accumulator, dac. The precision needed */
+ /* is enough to contain the full information in the lhs (which */
+ /* is the total digits, including exponent), or the requested */
+ /* precision, if larger, + 4; 6 is used for the exponent */
+ /* maximum length, and this is also used when it is shorter */
+ /* than the requested digits as it greatly reduces the >0.5 ulp */
+ /* cases at little cost (because Ln doubles digits each */
+ /* iteration so a few extra digits rarely causes an extra */
+ /* iteration) */
+ aset.digits=MAXI(lhs->digits, set->digits)+6+4;
+ } /* non-integer rhs */
+
+ else { /* rhs is in-range integer */
+ if (n==0) { /* x**0 = 1 */
+ /* (0**0 was handled above) */
+ decNumberZero(res); /* result=1 */
+ *res->lsu=1; /* .. */
+ break;}
+ /* rhs is a non-zero integer */
+ if (n<0) n=-n; /* use abs(n) */
+
+ aset=*set; /* clone the context */
+ aset.round=DEC_ROUND_HALF_EVEN; /* internally use balanced */
+ /* calculate the working DIGITS */
+ aset.digits=reqdigits+(rhs->digits+rhs->exponent)+2;
+ #if DECSUBSET
+ if (!set->extended) aset.digits--; /* use classic precision */
+ #endif
+ /* it's an error if this is more than can be handled */
+ if (aset.digits>DECNUMMAXP) {status|=DEC_Invalid_operation; break;}
+ } /* integer path */
+
+ /* aset.digits is the count of digits for the accumulator needed */
+ /* if accumulator is too long for local storage, then allocate */
+ needbytes=sizeof(decNumber)+(D2U(aset.digits)-1)*sizeof(Unit);
+ /* [needbytes also used below if 1/lhs needed] */
+ if (needbytes>sizeof(dacbuff)) {
+ allocdac=(decNumber *)malloc(needbytes);
+ if (allocdac==NULL) { /* hopeless -- abandon */
+ status|=DEC_Insufficient_storage;
+ break;}
+ dac=allocdac; /* use the allocated space */
+ }
+ /* here, aset is set up and accumulator is ready for use */
+
+ if (!useint) { /* non-integral rhs */
+ /* x ** y; special-case x=1 here as it will otherwise always */
+ /* reduce to integer 1; decLnOp has a fastpath which detects */
+ /* the case of x=1 */
+ decLnOp(dac, lhs, &aset, &status); /* dac=ln(lhs) */
+ /* [no error possible, as lhs 0 already handled] */
+ if (ISZERO(dac)) { /* x==1, 1.0, etc. */
+ /* need to return fully-padded 1.0000 etc., but rhsint->1 */
+ *dac->lsu=1; /* was 0, make int 1 */
+ if (!rhsint) { /* add padding */
+ Int shift=set->digits-1;
+ dac->digits=decShiftToMost(dac->lsu, 1, shift);
+ dac->exponent=-shift; /* make 1.0000... */
+ status|=DEC_Inexact|DEC_Rounded; /* deemed inexact */
+ }
+ }
+ else {
+ decMultiplyOp(dac, dac, rhs, &aset, &status); /* dac=dac*rhs */
+ decExpOp(dac, dac, &aset, &status); /* dac=exp(dac) */
+ }
+ /* and drop through for final rounding */
+ } /* non-integer rhs */
+
+ else { /* carry on with integer */
+ decNumberZero(dac); /* acc=1 */
+ *dac->lsu=1; /* .. */
+
+ /* if a negative power the constant 1 is needed, and if not subset */
+ /* invert the lhs now rather than inverting the result later */
+ if (decNumberIsNegative(rhs)) { /* was a **-n [hence digits>0] */
+ decNumber *inv=invbuff; /* asssume use fixed buffer */
+ decNumberCopy(&dnOne, dac); /* dnOne=1; [needed now or later] */
+ #if DECSUBSET
+ if (set->extended) { /* need to calculate 1/lhs */
+ #endif
+ /* divide lhs into 1, putting result in dac [dac=1/dac] */
+ decDivideOp(dac, &dnOne, lhs, &aset, DIVIDE, &status);
+ /* now locate or allocate space for the inverted lhs */
+ if (needbytes>sizeof(invbuff)) {
+ allocinv=(decNumber *)malloc(needbytes);
+ if (allocinv==NULL) { /* hopeless -- abandon */
+ status|=DEC_Insufficient_storage;
+ break;}
+ inv=allocinv; /* use the allocated space */
+ }
+ /* [inv now points to big-enough buffer or allocated storage] */
+ decNumberCopy(inv, dac); /* copy the 1/lhs */
+ decNumberCopy(dac, &dnOne); /* restore acc=1 */
+ lhs=inv; /* .. and go forward with new lhs */
+ #if DECSUBSET
+ }
+ #endif
+ }
+
+ /* Raise-to-the-power loop... */
+ seenbit=0; /* set once a 1-bit is encountered */
+ for (i=1;;i++){ /* for each bit [top bit ignored] */
+ /* abandon if had overflow or terminal underflow */
+ if (status & (DEC_Overflow|DEC_Underflow)) { /* interesting? */
+ if (status&DEC_Overflow || ISZERO(dac)) break;
+ }
+ /* [the following two lines revealed an optimizer bug in a C++ */
+ /* compiler, with symptom: 5**3 -> 25, when n=n+n was used] */
+ n=n<<1; /* move next bit to testable position */
+ if (n<0) { /* top bit is set */
+ seenbit=1; /* OK, significant bit seen */
+ decMultiplyOp(dac, dac, lhs, &aset, &status); /* dac=dac*x */
+ }
+ if (i==31) break; /* that was the last bit */
+ if (!seenbit) continue; /* no need to square 1 */
+ decMultiplyOp(dac, dac, dac, &aset, &status); /* dac=dac*dac [square] */
+ } /*i*/ /* 32 bits */
+
+ /* complete internal overflow or underflow processing */
+ if (status & (DEC_Overflow|DEC_Underflow)) {
+ #if DECSUBSET
+ /* If subset, and power was negative, reverse the kind of -erflow */
+ /* [1/x not yet done] */
+ if (!set->extended && decNumberIsNegative(rhs)) {
+ if (status & DEC_Overflow)
+ status^=DEC_Overflow | DEC_Underflow | DEC_Subnormal;
+ else { /* trickier -- Underflow may or may not be set */
+ status&=~(DEC_Underflow | DEC_Subnormal); /* [one or both] */
+ status|=DEC_Overflow;
+ }
+ }
+ #endif
+ dac->bits=(dac->bits & ~DECNEG) | bits; /* force correct sign */
+ /* round subnormals [to set.digits rather than aset.digits] */
+ /* or set overflow result similarly as required */
+ decFinalize(dac, set, &residue, &status);
+ decNumberCopy(res, dac); /* copy to result (is now OK length) */
+ break;
+ }
+
+ #if DECSUBSET
+ if (!set->extended && /* subset math */
+ decNumberIsNegative(rhs)) { /* was a **-n [hence digits>0] */
+ /* so divide result into 1 [dac=1/dac] */
+ decDivideOp(dac, &dnOne, dac, &aset, DIVIDE, &status);
+ }
+ #endif
+ } /* rhs integer path */
+
+ /* reduce result to the requested length and copy to result */
+ decCopyFit(res, dac, set, &residue, &status);
+ decFinish(res, set, &residue, &status); /* final cleanup */
+ #if DECSUBSET
+ if (!set->extended) decTrim(res, set, 0, &dropped); /* trailing zeros */
+ #endif
+ } while(0); /* end protected */
+
+ if (allocdac!=NULL) free(allocdac); /* drop any storage used */
+ if (allocinv!=NULL) free(allocinv); /* .. */
+ #if DECSUBSET
+ if (alloclhs!=NULL) free(alloclhs); /* .. */
+ if (allocrhs!=NULL) free(allocrhs); /* .. */
+ #endif
+ if (status!=0) decStatus(res, status, set);
+ #if DECCHECK
+ decCheckInexact(res, set);
+ #endif
+ return res;
+ } /* decNumberPower */
+
+/* ------------------------------------------------------------------ */
+/* decNumberQuantize -- force exponent to requested value */
+/* */
+/* This computes C = op(A, B), where op adjusts the coefficient */
+/* of C (by rounding or shifting) such that the exponent (-scale) */
+/* of C has exponent of B. The numerical value of C will equal A, */
+/* except for the effects of any rounding that occurred. */
+/* */
+/* res is C, the result. C may be A or B */
+/* lhs is A, the number to adjust */
+/* rhs is B, the number with exponent to match */
+/* set is the context */
+/* */
+/* C must have space for set->digits digits. */
+/* */
+/* Unless there is an error or the result is infinite, the exponent */
+/* after the operation is guaranteed to be equal to that of B. */
+/* ------------------------------------------------------------------ */
+decNumber * decNumberQuantize(decNumber *res, const decNumber *lhs,
+ const decNumber *rhs, decContext *set) {
+ uInt status=0; /* accumulator */
+ decQuantizeOp(res, lhs, rhs, set, 1, &status);
+ if (status!=0) decStatus(res, status, set);
+ return res;
+ } /* decNumberQuantize */
+
+/* ------------------------------------------------------------------ */
+/* decNumberReduce -- remove trailing zeros */
+/* */
+/* This computes C = 0 + A, and normalizes the result */
+/* */
+/* res is C, the result. C may be A */
+/* rhs is A */
+/* set is the context */
+/* */
+/* C must have space for set->digits digits. */
+/* ------------------------------------------------------------------ */
+/* Previously known as Normalize */
+decNumber * decNumberNormalize(decNumber *res, const decNumber *rhs,
+ decContext *set) {
+ return decNumberReduce(res, rhs, set);
+ } /* decNumberNormalize */
+
+decNumber * decNumberReduce(decNumber *res, const decNumber *rhs,
+ decContext *set) {
+ #if DECSUBSET
+ decNumber *allocrhs=NULL; /* non-NULL if rounded rhs allocated */
+ #endif
+ uInt status=0; /* as usual */
+ Int residue=0; /* as usual */
+ Int dropped; /* work */
+
+ #if DECCHECK
+ if (decCheckOperands(res, DECUNUSED, rhs, set)) return res;
+ #endif
+
+ do { /* protect allocated storage */
+ #if DECSUBSET
+ if (!set->extended) {
+ /* reduce operand and set lostDigits status, as needed */
+ if (rhs->digits>set->digits) {
+ allocrhs=decRoundOperand(rhs, set, &status);
+ if (allocrhs==NULL) break;
+ rhs=allocrhs;
+ }
+ }
+ #endif
+ /* [following code does not require input rounding] */
+
+ /* Infinities copy through; NaNs need usual treatment */
+ if (decNumberIsNaN(rhs)) {
+ decNaNs(res, rhs, NULL, set, &status);
+ break;
+ }
+
+ /* reduce result to the requested length and copy to result */
+ decCopyFit(res, rhs, set, &residue, &status); /* copy & round */
+ decFinish(res, set, &residue, &status); /* cleanup/set flags */
+ decTrim(res, set, 1, &dropped); /* normalize in place */
+ } while(0); /* end protected */
+
+ #if DECSUBSET
+ if (allocrhs !=NULL) free(allocrhs); /* .. */
+ #endif
+ if (status!=0) decStatus(res, status, set);/* then report status */
+ return res;
+ } /* decNumberReduce */
+
+/* ------------------------------------------------------------------ */
+/* decNumberRescale -- force exponent to requested value */
+/* */
+/* This computes C = op(A, B), where op adjusts the coefficient */
+/* of C (by rounding or shifting) such that the exponent (-scale) */
+/* of C has the value B. The numerical value of C will equal A, */
+/* except for the effects of any rounding that occurred. */
+/* */
+/* res is C, the result. C may be A or B */
+/* lhs is A, the number to adjust */
+/* rhs is B, the requested exponent */
+/* set is the context */
+/* */
+/* C must have space for set->digits digits. */
+/* */
+/* Unless there is an error or the result is infinite, the exponent */
+/* after the operation is guaranteed to be equal to B. */
+/* ------------------------------------------------------------------ */
+decNumber * decNumberRescale(decNumber *res, const decNumber *lhs,
+ const decNumber *rhs, decContext *set) {
+ uInt status=0; /* accumulator */
+ decQuantizeOp(res, lhs, rhs, set, 0, &status);
+ if (status!=0) decStatus(res, status, set);
+ return res;
+ } /* decNumberRescale */
+
+/* ------------------------------------------------------------------ */
+/* decNumberRemainder -- divide and return remainder */
+/* */
+/* This computes C = A % B */
+/* */
+/* res is C, the result. C may be A and/or B (e.g., X=X%X) */
+/* lhs is A */
+/* rhs is B */
+/* set is the context */
+/* */
+/* C must have space for set->digits digits. */
+/* ------------------------------------------------------------------ */
+decNumber * decNumberRemainder(decNumber *res, const decNumber *lhs,
+ const decNumber *rhs, decContext *set) {
+ uInt status=0; /* accumulator */
+ decDivideOp(res, lhs, rhs, set, REMAINDER, &status);
+ if (status!=0) decStatus(res, status, set);
+ #if DECCHECK
+ decCheckInexact(res, set);
+ #endif
+ return res;
+ } /* decNumberRemainder */
+
+/* ------------------------------------------------------------------ */
+/* decNumberRemainderNear -- divide and return remainder from nearest */
+/* */
+/* This computes C = A % B, where % is the IEEE remainder operator */
+/* */
+/* res is C, the result. C may be A and/or B (e.g., X=X%X) */
+/* lhs is A */
+/* rhs is B */
+/* set is the context */
+/* */
+/* C must have space for set->digits digits. */
+/* ------------------------------------------------------------------ */
+decNumber * decNumberRemainderNear(decNumber *res, const decNumber *lhs,
+ const decNumber *rhs, decContext *set) {
+ uInt status=0; /* accumulator */
+ decDivideOp(res, lhs, rhs, set, REMNEAR, &status);
+ if (status!=0) decStatus(res, status, set);
+ #if DECCHECK
+ decCheckInexact(res, set);
+ #endif
+ return res;
+ } /* decNumberRemainderNear */
+
+/* ------------------------------------------------------------------ */
+/* decNumberRotate -- rotate the coefficient of a Number left/right */
+/* */
+/* This computes C = A rot B (in base ten and rotating set->digits */
+/* digits). */
+/* */
+/* res is C, the result. C may be A and/or B (e.g., X=XrotX) */
+/* lhs is A */
+/* rhs is B, the number of digits to rotate (-ve to right) */
+/* set is the context */
+/* */
+/* The digits of the coefficient of A are rotated to the left (if B */
+/* is positive) or to the right (if B is negative) without adjusting */
+/* the exponent or the sign of A. If lhs->digits is less than */
+/* set->digits the coefficient is padded with zeros on the left */
+/* before the rotate. Any leading zeros in the result are removed */
+/* as usual. */
+/* */
+/* B must be an integer (q=0) and in the range -set->digits through */
+/* +set->digits. */
+/* C must have space for set->digits digits. */
+/* NaNs are propagated as usual. Infinities are unaffected (but */
+/* B must be valid). No status is set unless B is invalid or an */
+/* operand is an sNaN. */
+/* ------------------------------------------------------------------ */
+decNumber * decNumberRotate(decNumber *res, const decNumber *lhs,
+ const decNumber *rhs, decContext *set) {
+ uInt status=0; /* accumulator */
+ Int rotate; /* rhs as an Int */
+
+ #if DECCHECK
+ if (decCheckOperands(res, lhs, rhs, set)) return res;
+ #endif
+
+ /* NaNs propagate as normal */
+ if (decNumberIsNaN(lhs) || decNumberIsNaN(rhs))
+ decNaNs(res, lhs, rhs, set, &status);
+ /* rhs must be an integer */
+ else if (decNumberIsInfinite(rhs) || rhs->exponent!=0)
+ status=DEC_Invalid_operation;
+ else { /* both numeric, rhs is an integer */
+ rotate=decGetInt(rhs); /* [cannot fail] */
+ if (rotate==BADINT /* something bad .. */
+ || rotate==BIGODD || rotate==BIGEVEN /* .. very big .. */
+ || abs(rotate)>set->digits) /* .. or out of range */
+ status=DEC_Invalid_operation;
+ else { /* rhs is OK */
+ decNumberCopy(res, lhs);
+ /* convert -ve rotate to equivalent positive rotation */
+ if (rotate<0) rotate=set->digits+rotate;
+ if (rotate!=0 && rotate!=set->digits /* zero or full rotation */
+ && !decNumberIsInfinite(res)) { /* lhs was infinite */
+ /* left-rotate to do; 0 < rotate < set->digits */
+ uInt units, shift; /* work */
+ uInt msudigits; /* digits in result msu */
+ Unit *msu=res->lsu+D2U(res->digits)-1; /* current msu */
+ Unit *msumax=res->lsu+D2U(set->digits)-1; /* rotation msu */
+ for (msu++; msu<=msumax; msu++) *msu=0; /* ensure high units=0 */
+ res->digits=set->digits; /* now full-length */
+ msudigits=MSUDIGITS(res->digits); /* actual digits in msu */
+
+ /* rotation here is done in-place, in three steps */
+ /* 1. shift all to least up to one unit to unit-align final */
+ /* lsd [any digits shifted out are rotated to the left, */
+ /* abutted to the original msd (which may require split)] */
+ /* */
+ /* [if there are no whole units left to rotate, the */
+ /* rotation is now complete] */
+ /* */
+ /* 2. shift to least, from below the split point only, so that */
+ /* the final msd is in the right place in its Unit [any */
+ /* digits shifted out will fit exactly in the current msu, */
+ /* left aligned, no split required] */
+ /* */
+ /* 3. rotate all the units by reversing left part, right */
+ /* part, and then whole */
+ /* */
+ /* example: rotate right 8 digits (2 units + 2), DECDPUN=3. */
+ /* */
+ /* start: 00a bcd efg hij klm npq */
+ /* */
+ /* 1a 000 0ab cde fgh|ijk lmn [pq saved] */
+ /* 1b 00p qab cde fgh|ijk lmn */
+ /* */
+ /* 2a 00p qab cde fgh|00i jkl [mn saved] */
+ /* 2b mnp qab cde fgh|00i jkl */
+ /* */
+ /* 3a fgh cde qab mnp|00i jkl */
+ /* 3b fgh cde qab mnp|jkl 00i */
+ /* 3c 00i jkl mnp qab cde fgh */
+
+ /* Step 1: amount to shift is the partial right-rotate count */
+ rotate=set->digits-rotate; /* make it right-rotate */
+ units=rotate/DECDPUN; /* whole units to rotate */
+ shift=rotate%DECDPUN; /* left-over digits count */
+ if (shift>0) { /* not an exact number of units */
+ uInt save=res->lsu[0]%powers[shift]; /* save low digit(s) */
+ decShiftToLeast(res->lsu, D2U(res->digits), shift);
+ if (shift>msudigits) { /* msumax-1 needs >0 digits */
+ uInt rem=save%powers[shift-msudigits];/* split save */
+ *msumax=(Unit)(save/powers[shift-msudigits]); /* and insert */
+ *(msumax-1)=*(msumax-1)
+ +(Unit)(rem*powers[DECDPUN-(shift-msudigits)]); /* .. */
+ }
+ else { /* all fits in msumax */
+ *msumax=*msumax+(Unit)(save*powers[msudigits-shift]); /* [maybe *1] */
+ }
+ } /* digits shift needed */
+
+ /* If whole units to rotate... */
+ if (units>0) { /* some to do */
+ /* Step 2: the units to touch are the whole ones in rotate, */
+ /* if any, and the shift is DECDPUN-msudigits (which may be */
+ /* 0, again) */
+ shift=DECDPUN-msudigits;
+ if (shift>0) { /* not an exact number of units */
+ uInt save=res->lsu[0]%powers[shift]; /* save low digit(s) */
+ decShiftToLeast(res->lsu, units, shift);
+ *msumax=*msumax+(Unit)(save*powers[msudigits]);
+ } /* partial shift needed */
+
+ /* Step 3: rotate the units array using triple reverse */
+ /* (reversing is easy and fast) */
+ decReverse(res->lsu+units, msumax); /* left part */
+ decReverse(res->lsu, res->lsu+units-1); /* right part */
+ decReverse(res->lsu, msumax); /* whole */
+ } /* whole units to rotate */
+ /* the rotation may have left an undetermined number of zeros */
+ /* on the left, so true length needs to be calculated */
+ res->digits=decGetDigits(res->lsu, msumax-res->lsu+1);
+ } /* rotate needed */
+ } /* rhs OK */
+ } /* numerics */
+ if (status!=0) decStatus(res, status, set);
+ return res;
+ } /* decNumberRotate */
+
+/* ------------------------------------------------------------------ */
+/* decNumberSameQuantum -- test for equal exponents */
+/* */
+/* res is the result number, which will contain either 0 or 1 */
+/* lhs is a number to test */
+/* rhs is the second (usually a pattern) */
+/* */
+/* No errors are possible and no context is needed. */
+/* ------------------------------------------------------------------ */
+decNumber * decNumberSameQuantum(decNumber *res, const decNumber *lhs,
+ const decNumber *rhs) {
+ Unit ret=0; /* return value */
+
+ #if DECCHECK
+ if (decCheckOperands(res, lhs, rhs, DECUNCONT)) return res;
+ #endif
+
+ if (SPECIALARGS) {
+ if (decNumberIsNaN(lhs) && decNumberIsNaN(rhs)) ret=1;
+ else if (decNumberIsInfinite(lhs) && decNumberIsInfinite(rhs)) ret=1;
+ /* [anything else with a special gives 0] */
+ }
+ else if (lhs->exponent==rhs->exponent) ret=1;
+
+ decNumberZero(res); /* OK to overwrite an operand now */
+ *res->lsu=ret;
+ return res;
+ } /* decNumberSameQuantum */
+
+/* ------------------------------------------------------------------ */
+/* decNumberScaleB -- multiply by a power of 10 */
+/* */
+/* This computes C = A x 10**B where B is an integer (q=0) with */
+/* maximum magnitude 2*(emax+digits) */
+/* */
+/* res is C, the result. C may be A or B */
+/* lhs is A, the number to adjust */
+/* rhs is B, the requested power of ten to use */
+/* set is the context */
+/* */
+/* C must have space for set->digits digits. */
+/* */
+/* The result may underflow or overflow. */
+/* ------------------------------------------------------------------ */
+decNumber * decNumberScaleB(decNumber *res, const decNumber *lhs,
+ const decNumber *rhs, decContext *set) {
+ Int reqexp; /* requested exponent change [B] */
+ uInt status=0; /* accumulator */
+ Int residue; /* work */
+
+ #if DECCHECK
+ if (decCheckOperands(res, lhs, rhs, set)) return res;
+ #endif
+
+ /* Handle special values except lhs infinite */
+ if (decNumberIsNaN(lhs) || decNumberIsNaN(rhs))
+ decNaNs(res, lhs, rhs, set, &status);
+ /* rhs must be an integer */
+ else if (decNumberIsInfinite(rhs) || rhs->exponent!=0)
+ status=DEC_Invalid_operation;
+ else {
+ /* lhs is a number; rhs is a finite with q==0 */
+ reqexp=decGetInt(rhs); /* [cannot fail] */
+ if (reqexp==BADINT /* something bad .. */
+ || reqexp==BIGODD || reqexp==BIGEVEN /* .. very big .. */
+ || abs(reqexp)>(2*(set->digits+set->emax))) /* .. or out of range */
+ status=DEC_Invalid_operation;
+ else { /* rhs is OK */
+ decNumberCopy(res, lhs); /* all done if infinite lhs */
+ if (!decNumberIsInfinite(res)) { /* prepare to scale */
+ res->exponent+=reqexp; /* adjust the exponent */
+ residue=0;
+ decFinalize(res, set, &residue, &status); /* .. and check */
+ } /* finite LHS */
+ } /* rhs OK */
+ } /* rhs finite */
+ if (status!=0) decStatus(res, status, set);
+ return res;
+ } /* decNumberScaleB */
+
+/* ------------------------------------------------------------------ */
+/* decNumberShift -- shift the coefficient of a Number left or right */
+/* */
+/* This computes C = A << B or C = A >> -B (in base ten). */
+/* */
+/* res is C, the result. C may be A and/or B (e.g., X=X<<X) */
+/* lhs is A */
+/* rhs is B, the number of digits to shift (-ve to right) */
+/* set is the context */
+/* */
+/* The digits of the coefficient of A are shifted to the left (if B */
+/* is positive) or to the right (if B is negative) without adjusting */
+/* the exponent or the sign of A. */
+/* */
+/* B must be an integer (q=0) and in the range -set->digits through */
+/* +set->digits. */
+/* C must have space for set->digits digits. */
+/* NaNs are propagated as usual. Infinities are unaffected (but */
+/* B must be valid). No status is set unless B is invalid or an */
+/* operand is an sNaN. */
+/* ------------------------------------------------------------------ */
+decNumber * decNumberShift(decNumber *res, const decNumber *lhs,
+ const decNumber *rhs, decContext *set) {
+ uInt status=0; /* accumulator */
+ Int shift; /* rhs as an Int */
+
+ #if DECCHECK
+ if (decCheckOperands(res, lhs, rhs, set)) return res;
+ #endif
+
+ /* NaNs propagate as normal */
+ if (decNumberIsNaN(lhs) || decNumberIsNaN(rhs))
+ decNaNs(res, lhs, rhs, set, &status);
+ /* rhs must be an integer */
+ else if (decNumberIsInfinite(rhs) || rhs->exponent!=0)
+ status=DEC_Invalid_operation;
+ else { /* both numeric, rhs is an integer */
+ shift=decGetInt(rhs); /* [cannot fail] */
+ if (shift==BADINT /* something bad .. */
+ || shift==BIGODD || shift==BIGEVEN /* .. very big .. */
+ || abs(shift)>set->digits) /* .. or out of range */
+ status=DEC_Invalid_operation;
+ else { /* rhs is OK */
+ decNumberCopy(res, lhs);
+ if (shift!=0 && !decNumberIsInfinite(res)) { /* something to do */
+ if (shift>0) { /* to left */
+ if (shift==set->digits) { /* removing all */
+ *res->lsu=0; /* so place 0 */
+ res->digits=1; /* .. */
+ }
+ else { /* */
+ /* first remove leading digits if necessary */
+ if (res->digits+shift>set->digits) {
+ decDecap(res, res->digits+shift-set->digits);
+ /* that updated res->digits; may have gone to 1 (for a */
+ /* single digit or for zero */
+ }
+ if (res->digits>1 || *res->lsu) /* if non-zero.. */
+ res->digits=decShiftToMost(res->lsu, res->digits, shift);
+ } /* partial left */
+ } /* left */
+ else { /* to right */
+ if (-shift>=res->digits) { /* discarding all */
+ *res->lsu=0; /* so place 0 */
+ res->digits=1; /* .. */
+ }
+ else {
+ decShiftToLeast(res->lsu, D2U(res->digits), -shift);
+ res->digits-=(-shift);
+ }
+ } /* to right */
+ } /* non-0 non-Inf shift */
+ } /* rhs OK */
+ } /* numerics */
+ if (status!=0) decStatus(res, status, set);
+ return res;
+ } /* decNumberShift */
+
+/* ------------------------------------------------------------------ */
+/* decNumberSquareRoot -- square root operator */
+/* */
+/* This computes C = squareroot(A) */
+/* */
+/* res is C, the result. C may be A */
+/* rhs is A */
+/* set is the context; note that rounding mode has no effect */
+/* */
+/* C must have space for set->digits digits. */
+/* ------------------------------------------------------------------ */
+/* This uses the following varying-precision algorithm in: */
+/* */
+/* Properly Rounded Variable Precision Square Root, T. E. Hull and */
+/* A. Abrham, ACM Transactions on Mathematical Software, Vol 11 #3, */
+/* pp229-237, ACM, September 1985. */
+/* */
+/* The square-root is calculated using Newton's method, after which */
+/* a check is made to ensure the result is correctly rounded. */
+/* */
+/* % [Reformatted original Numerical Turing source code follows.] */
+/* function sqrt(x : real) : real */
+/* % sqrt(x) returns the properly rounded approximation to the square */
+/* % root of x, in the precision of the calling environment, or it */
+/* % fails if x < 0. */
+/* % t e hull and a abrham, august, 1984 */
+/* if x <= 0 then */
+/* if x < 0 then */
+/* assert false */
+/* else */
+/* result 0 */
+/* end if */
+/* end if */
+/* var f := setexp(x, 0) % fraction part of x [0.1 <= x < 1] */
+/* var e := getexp(x) % exponent part of x */
+/* var approx : real */
+/* if e mod 2 = 0 then */
+/* approx := .259 + .819 * f % approx to root of f */
+/* else */
+/* f := f/l0 % adjustments */
+/* e := e + 1 % for odd */
+/* approx := .0819 + 2.59 * f % exponent */
+/* end if */
+/* */
+/* var p:= 3 */
+/* const maxp := currentprecision + 2 */
+/* loop */
+/* p := min(2*p - 2, maxp) % p = 4,6,10, . . . , maxp */
+/* precision p */
+/* approx := .5 * (approx + f/approx) */
+/* exit when p = maxp */
+/* end loop */
+/* */
+/* % approx is now within 1 ulp of the properly rounded square root */
+/* % of f; to ensure proper rounding, compare squares of (approx - */
+/* % l/2 ulp) and (approx + l/2 ulp) with f. */
+/* p := currentprecision */
+/* begin */
+/* precision p + 2 */
+/* const approxsubhalf := approx - setexp(.5, -p) */
+/* if mulru(approxsubhalf, approxsubhalf) > f then */
+/* approx := approx - setexp(.l, -p + 1) */
+/* else */
+/* const approxaddhalf := approx + setexp(.5, -p) */
+/* if mulrd(approxaddhalf, approxaddhalf) < f then */
+/* approx := approx + setexp(.l, -p + 1) */
+/* end if */
+/* end if */
+/* end */
+/* result setexp(approx, e div 2) % fix exponent */
+/* end sqrt */
+/* ------------------------------------------------------------------ */
+decNumber * decNumberSquareRoot(decNumber *res, const decNumber *rhs,
+ decContext *set) {
+ decContext workset, approxset; /* work contexts */
+ decNumber dzero; /* used for constant zero */
+ Int maxp; /* largest working precision */
+ Int workp; /* working precision */
+ Int residue=0; /* rounding residue */
+ uInt status=0, ignore=0; /* status accumulators */
+ uInt rstatus; /* .. */
+ Int exp; /* working exponent */
+ Int ideal; /* ideal (preferred) exponent */
+ Int needbytes; /* work */
+ Int dropped; /* .. */
+
+ #if DECSUBSET
+ decNumber *allocrhs=NULL; /* non-NULL if rounded rhs allocated */
+ #endif
+ /* buffer for f [needs +1 in case DECBUFFER 0] */
+ decNumber buff[D2N(DECBUFFER+1)];
+ /* buffer for a [needs +2 to match likely maxp] */
+ decNumber bufa[D2N(DECBUFFER+2)];
+ /* buffer for temporary, b [must be same size as a] */
+ decNumber bufb[D2N(DECBUFFER+2)];
+ decNumber *allocbuff=NULL; /* -> allocated buff, iff allocated */
+ decNumber *allocbufa=NULL; /* -> allocated bufa, iff allocated */
+ decNumber *allocbufb=NULL; /* -> allocated bufb, iff allocated */
+ decNumber *f=buff; /* reduced fraction */
+ decNumber *a=bufa; /* approximation to result */
+ decNumber *b=bufb; /* intermediate result */
+ /* buffer for temporary variable, up to 3 digits */
+ decNumber buft[D2N(3)];
+ decNumber *t=buft; /* up-to-3-digit constant or work */
+
+ #if DECCHECK
+ if (decCheckOperands(res, DECUNUSED, rhs, set)) return res;
+ #endif
+
+ do { /* protect allocated storage */
+ #if DECSUBSET
+ if (!set->extended) {
+ /* reduce operand and set lostDigits status, as needed */
+ if (rhs->digits>set->digits) {
+ allocrhs=decRoundOperand(rhs, set, &status);
+ if (allocrhs==NULL) break;
+ /* [Note: 'f' allocation below could reuse this buffer if */
+ /* used, but as this is rare they are kept separate for clarity.] */
+ rhs=allocrhs;
+ }
+ }
+ #endif
+ /* [following code does not require input rounding] */
+
+ /* handle infinities and NaNs */
+ if (SPECIALARG) {
+ if (decNumberIsInfinite(rhs)) { /* an infinity */
+ if (decNumberIsNegative(rhs)) status|=DEC_Invalid_operation;
+ else decNumberCopy(res, rhs); /* +Infinity */
+ }
+ else decNaNs(res, rhs, NULL, set, &status); /* a NaN */
+ break;
+ }
+
+ /* calculate the ideal (preferred) exponent [floor(exp/2)] */
+ /* [We would like to write: ideal=rhs->exponent>>1, but this */
+ /* generates a compiler warning. Generated code is the same.] */
+ ideal=(rhs->exponent&~1)/2; /* target */
+
+ /* handle zeros */
+ if (ISZERO(rhs)) {
+ decNumberCopy(res, rhs); /* could be 0 or -0 */
+ res->exponent=ideal; /* use the ideal [safe] */
+ /* use decFinish to clamp any out-of-range exponent, etc. */
+ decFinish(res, set, &residue, &status);
+ break;
+ }
+
+ /* any other -x is an oops */
+ if (decNumberIsNegative(rhs)) {
+ status|=DEC_Invalid_operation;
+ break;
+ }
+
+ /* space is needed for three working variables */
+ /* f -- the same precision as the RHS, reduced to 0.01->0.99... */
+ /* a -- Hull's approximation -- precision, when assigned, is */
+ /* currentprecision+1 or the input argument precision, */
+ /* whichever is larger (+2 for use as temporary) */
+ /* b -- intermediate temporary result (same size as a) */
+ /* if any is too long for local storage, then allocate */
+ workp=MAXI(set->digits+1, rhs->digits); /* actual rounding precision */
+ maxp=workp+2; /* largest working precision */
+
+ needbytes=sizeof(decNumber)+(D2U(rhs->digits)-1)*sizeof(Unit);
+ if (needbytes>(Int)sizeof(buff)) {
+ allocbuff=(decNumber *)malloc(needbytes);
+ if (allocbuff==NULL) { /* hopeless -- abandon */
+ status|=DEC_Insufficient_storage;
+ break;}
+ f=allocbuff; /* use the allocated space */
+ }
+ /* a and b both need to be able to hold a maxp-length number */
+ needbytes=sizeof(decNumber)+(D2U(maxp)-1)*sizeof(Unit);
+ if (needbytes>(Int)sizeof(bufa)) { /* [same applies to b] */
+ allocbufa=(decNumber *)malloc(needbytes);
+ allocbufb=(decNumber *)malloc(needbytes);
+ if (allocbufa==NULL || allocbufb==NULL) { /* hopeless */
+ status|=DEC_Insufficient_storage;
+ break;}
+ a=allocbufa; /* use the allocated spaces */
+ b=allocbufb; /* .. */
+ }
+
+ /* copy rhs -> f, save exponent, and reduce so 0.1 <= f < 1 */
+ decNumberCopy(f, rhs);
+ exp=f->exponent+f->digits; /* adjusted to Hull rules */
+ f->exponent=-(f->digits); /* to range */
+
+ /* set up working context */
+ decContextDefault(&workset, DEC_INIT_DECIMAL64);
+
+ /* [Until further notice, no error is possible and status bits */
+ /* (Rounded, etc.) should be ignored, not accumulated.] */
+
+ /* Calculate initial approximation, and allow for odd exponent */
+ workset.digits=workp; /* p for initial calculation */
+ t->bits=0; t->digits=3;
+ a->bits=0; a->digits=3;
+ if ((exp & 1)==0) { /* even exponent */
+ /* Set t=0.259, a=0.819 */
+ t->exponent=-3;
+ a->exponent=-3;
+ #if DECDPUN>=3
+ t->lsu[0]=259;
+ a->lsu[0]=819;
+ #elif DECDPUN==2
+ t->lsu[0]=59; t->lsu[1]=2;
+ a->lsu[0]=19; a->lsu[1]=8;
+ #else
+ t->lsu[0]=9; t->lsu[1]=5; t->lsu[2]=2;
+ a->lsu[0]=9; a->lsu[1]=1; a->lsu[2]=8;
+ #endif
+ }
+ else { /* odd exponent */
+ /* Set t=0.0819, a=2.59 */
+ f->exponent--; /* f=f/10 */
+ exp++; /* e=e+1 */
+ t->exponent=-4;
+ a->exponent=-2;
+ #if DECDPUN>=3
+ t->lsu[0]=819;
+ a->lsu[0]=259;
+ #elif DECDPUN==2
+ t->lsu[0]=19; t->lsu[1]=8;
+ a->lsu[0]=59; a->lsu[1]=2;
+ #else
+ t->lsu[0]=9; t->lsu[1]=1; t->lsu[2]=8;
+ a->lsu[0]=9; a->lsu[1]=5; a->lsu[2]=2;
+ #endif
+ }
+ decMultiplyOp(a, a, f, &workset, &ignore); /* a=a*f */
+ decAddOp(a, a, t, &workset, 0, &ignore); /* ..+t */
+ /* [a is now the initial approximation for sqrt(f), calculated with */
+ /* currentprecision, which is also a's precision.] */
+
+ /* the main calculation loop */
+ decNumberZero(&dzero); /* make 0 */
+ decNumberZero(t); /* set t = 0.5 */
+ t->lsu[0]=5; /* .. */
+ t->exponent=-1; /* .. */
+ workset.digits=3; /* initial p */
+ for (;;) {
+ /* set p to min(2*p - 2, maxp) [hence 3; or: 4, 6, 10, ... , maxp] */
+ workset.digits=workset.digits*2-2;
+ if (workset.digits>maxp) workset.digits=maxp;
+ /* a = 0.5 * (a + f/a) */
+ /* [calculated at p then rounded to currentprecision] */
+ decDivideOp(b, f, a, &workset, DIVIDE, &ignore); /* b=f/a */
+ decAddOp(b, b, a, &workset, 0, &ignore); /* b=b+a */
+ decMultiplyOp(a, b, t, &workset, &ignore); /* a=b*0.5 */
+ if (a->digits==maxp) break; /* have required digits */
+ } /* loop */
+
+ /* Here, 0.1 <= a < 1 [Hull], and a has maxp digits */
+ /* now reduce to length, etc.; this needs to be done with a */
+ /* having the correct exponent so as to handle subnormals */
+ /* correctly */
+ approxset=*set; /* get emin, emax, etc. */
+ approxset.round=DEC_ROUND_HALF_EVEN;
+ a->exponent+=exp/2; /* set correct exponent */
+
+ rstatus=0; /* clear status */
+ residue=0; /* .. and accumulator */
+ decCopyFit(a, a, &approxset, &residue, &rstatus); /* reduce (if needed) */
+ decFinish(a, &approxset, &residue, &rstatus); /* clean and finalize */
+
+ /* Overflow was possible if the input exponent was out-of-range, */
+ /* in which case quit */
+ if (rstatus&DEC_Overflow) {
+ status=rstatus; /* use the status as-is */
+ decNumberCopy(res, a); /* copy to result */
+ break;
+ }
+
+ /* Preserve status except Inexact/Rounded */
+ status|=(rstatus & ~(DEC_Rounded|DEC_Inexact));
+
+ /* Carry out the Hull correction */
+ a->exponent-=exp/2; /* back to 0.1->1 */
+
+ /* a is now at final precision and within 1 ulp of the properly */
+ /* rounded square root of f; to ensure proper rounding, compare */
+ /* squares of (a - l/2 ulp) and (a + l/2 ulp) with f. */
+ /* Here workset.digits=maxp and t=0.5, and a->digits determines */
+ /* the ulp */
+ workset.digits--; /* maxp-1 is OK now */
+ t->exponent=-a->digits-1; /* make 0.5 ulp */
+ decAddOp(b, a, t, &workset, DECNEG, &ignore); /* b = a - 0.5 ulp */
+ workset.round=DEC_ROUND_UP;
+ decMultiplyOp(b, b, b, &workset, &ignore); /* b = mulru(b, b) */
+ decCompareOp(b, f, b, &workset, COMPARE, &ignore); /* b ? f, reversed */
+ if (decNumberIsNegative(b)) { /* f < b [i.e., b > f] */
+ /* this is the more common adjustment, though both are rare */
+ t->exponent++; /* make 1.0 ulp */
+ t->lsu[0]=1; /* .. */
+ decAddOp(a, a, t, &workset, DECNEG, &ignore); /* a = a - 1 ulp */
+ /* assign to approx [round to length] */
+ approxset.emin-=exp/2; /* adjust to match a */
+ approxset.emax-=exp/2;
+ decAddOp(a, &dzero, a, &approxset, 0, &ignore);
+ }
+ else {
+ decAddOp(b, a, t, &workset, 0, &ignore); /* b = a + 0.5 ulp */
+ workset.round=DEC_ROUND_DOWN;
+ decMultiplyOp(b, b, b, &workset, &ignore); /* b = mulrd(b, b) */
+ decCompareOp(b, b, f, &workset, COMPARE, &ignore); /* b ? f */
+ if (decNumberIsNegative(b)) { /* b < f */
+ t->exponent++; /* make 1.0 ulp */
+ t->lsu[0]=1; /* .. */
+ decAddOp(a, a, t, &workset, 0, &ignore); /* a = a + 1 ulp */
+ /* assign to approx [round to length] */
+ approxset.emin-=exp/2; /* adjust to match a */
+ approxset.emax-=exp/2;
+ decAddOp(a, &dzero, a, &approxset, 0, &ignore);
+ }
+ }
+ /* [no errors are possible in the above, and rounding/inexact during */
+ /* estimation are irrelevant, so status was not accumulated] */
+
+ /* Here, 0.1 <= a < 1 (still), so adjust back */
+ a->exponent+=exp/2; /* set correct exponent */
+
+ /* count droppable zeros [after any subnormal rounding] by */
+ /* trimming a copy */
+ decNumberCopy(b, a);
+ decTrim(b, set, 1, &dropped); /* [drops trailing zeros] */
+
+ /* Set Inexact and Rounded. The answer can only be exact if */
+ /* it is short enough so that squaring it could fit in workp digits, */
+ /* and it cannot have trailing zeros due to clamping, so these are */
+ /* the only (relatively rare) conditions a careful check is needed */
+ if (b->digits*2-1 > workp && !set->clamp) { /* cannot fit */
+ status|=DEC_Inexact|DEC_Rounded;
+ }
+ else { /* could be exact/unrounded */
+ uInt mstatus=0; /* local status */
+ decMultiplyOp(b, b, b, &workset, &mstatus); /* try the multiply */
+ if (mstatus&DEC_Overflow) { /* result just won't fit */
+ status|=DEC_Inexact|DEC_Rounded;
+ }
+ else { /* plausible */
+ decCompareOp(t, b, rhs, &workset, COMPARE, &mstatus); /* b ? rhs */
+ if (!ISZERO(t)) status|=DEC_Inexact|DEC_Rounded; /* not equal */
+ else { /* is Exact */
+ /* here, dropped is the count of trailing zeros in 'a' */
+ /* use closest exponent to ideal... */
+ Int todrop=ideal-a->exponent; /* most that can be dropped */
+ if (todrop<0) status|=DEC_Rounded; /* ideally would add 0s */
+ else { /* unrounded */
+ if (dropped<todrop) { /* clamp to those available */
+ todrop=dropped;
+ status|=DEC_Clamped;
+ }
+ if (todrop>0) { /* have some to drop */
+ decShiftToLeast(a->lsu, D2U(a->digits), todrop);
+ a->exponent+=todrop; /* maintain numerical value */
+ a->digits-=todrop; /* new length */
+ }
+ }
+ }
+ }
+ }
+
+ /* double-check Underflow, as perhaps the result could not have */
+ /* been subnormal (initial argument too big), or it is now Exact */
+ if (status&DEC_Underflow) {
+ Int ae=rhs->exponent+rhs->digits-1; /* adjusted exponent */
+ /* check if truly subnormal */
+ #if DECEXTFLAG /* DEC_Subnormal too */
+ if (ae>=set->emin*2) status&=~(DEC_Subnormal|DEC_Underflow);
+ #else
+ if (ae>=set->emin*2) status&=~DEC_Underflow;
+ #endif
+ /* check if truly inexact */
+ if (!(status&DEC_Inexact)) status&=~DEC_Underflow;
+ }
+
+ decNumberCopy(res, a); /* a is now the result */
+ } while(0); /* end protected */
+
+ if (allocbuff!=NULL) free(allocbuff); /* drop any storage used */
+ if (allocbufa!=NULL) free(allocbufa); /* .. */
+ if (allocbufb!=NULL) free(allocbufb); /* .. */
+ #if DECSUBSET
+ if (allocrhs !=NULL) free(allocrhs); /* .. */
+ #endif
+ if (status!=0) decStatus(res, status, set);/* then report status */
+ #if DECCHECK
+ decCheckInexact(res, set);
+ #endif
+ return res;
+ } /* decNumberSquareRoot */
+
+/* ------------------------------------------------------------------ */
+/* decNumberSubtract -- subtract two Numbers */
+/* */
+/* This computes C = A - B */
+/* */
+/* res is C, the result. C may be A and/or B (e.g., X=X-X) */
+/* lhs is A */
+/* rhs is B */
+/* set is the context */
+/* */
+/* C must have space for set->digits digits. */
+/* ------------------------------------------------------------------ */
+decNumber * decNumberSubtract(decNumber *res, const decNumber *lhs,
+ const decNumber *rhs, decContext *set) {
+ uInt status=0; /* accumulator */
+
+ decAddOp(res, lhs, rhs, set, DECNEG, &status);
+ if (status!=0) decStatus(res, status, set);
+ #if DECCHECK
+ decCheckInexact(res, set);
+ #endif
+ return res;
+ } /* decNumberSubtract */
+
+/* ------------------------------------------------------------------ */
+/* decNumberToIntegralExact -- round-to-integral-value with InExact */
+/* decNumberToIntegralValue -- round-to-integral-value */
+/* */
+/* res is the result */
+/* rhs is input number */
+/* set is the context */
+/* */
+/* res must have space for any value of rhs. */
+/* */
+/* This implements the IEEE special operators and therefore treats */
+/* special values as valid. For finite numbers it returns */
+/* rescale(rhs, 0) if rhs->exponent is <0. */
+/* Otherwise the result is rhs (so no error is possible, except for */
+/* sNaN). */
+/* */
+/* The context is used for rounding mode and status after sNaN, but */
+/* the digits setting is ignored. The Exact version will signal */
+/* Inexact if the result differs numerically from rhs; the other */
+/* never signals Inexact. */
+/* ------------------------------------------------------------------ */
+decNumber * decNumberToIntegralExact(decNumber *res, const decNumber *rhs,
+ decContext *set) {
+ decNumber dn;
+ decContext workset; /* working context */
+ uInt status=0; /* accumulator */
+
+ #if DECCHECK
+ if (decCheckOperands(res, DECUNUSED, rhs, set)) return res;
+ #endif
+
+ /* handle infinities and NaNs */
+ if (SPECIALARG) {
+ if (decNumberIsInfinite(rhs)) decNumberCopy(res, rhs); /* an Infinity */
+ else decNaNs(res, rhs, NULL, set, &status); /* a NaN */
+ }
+ else { /* finite */
+ /* have a finite number; no error possible (res must be big enough) */
+ if (rhs->exponent>=0) return decNumberCopy(res, rhs);
+ /* that was easy, but if negative exponent there is work to do... */
+ workset=*set; /* clone rounding, etc. */
+ workset.digits=rhs->digits; /* no length rounding */
+ workset.traps=0; /* no traps */
+ decNumberZero(&dn); /* make a number with exponent 0 */
+ decNumberQuantize(res, rhs, &dn, &workset);
+ status|=workset.status;
+ }
+ if (status!=0) decStatus(res, status, set);
+ return res;
+ } /* decNumberToIntegralExact */
+
+decNumber * decNumberToIntegralValue(decNumber *res, const decNumber *rhs,
+ decContext *set) {
+ decContext workset=*set; /* working context */
+ workset.traps=0; /* no traps */
+ decNumberToIntegralExact(res, rhs, &workset);
+ /* this never affects set, except for sNaNs; NaN will have been set */
+ /* or propagated already, so no need to call decStatus */
+ set->status|=workset.status&DEC_Invalid_operation;
+ return res;
+ } /* decNumberToIntegralValue */
+
+/* ------------------------------------------------------------------ */
+/* decNumberXor -- XOR two Numbers, digitwise */
+/* */
+/* This computes C = A ^ B */
+/* */
+/* res is C, the result. C may be A and/or B (e.g., X=X^X) */
+/* lhs is A */
+/* rhs is B */
+/* set is the context (used for result length and error report) */
+/* */
+/* C must have space for set->digits digits. */
+/* */
+/* Logical function restrictions apply (see above); a NaN is */
+/* returned with Invalid_operation if a restriction is violated. */
+/* ------------------------------------------------------------------ */
+decNumber * decNumberXor(decNumber *res, const decNumber *lhs,
+ const decNumber *rhs, decContext *set) {
+ const Unit *ua, *ub; /* -> operands */
+ const Unit *msua, *msub; /* -> operand msus */
+ Unit *uc, *msuc; /* -> result and its msu */
+ Int msudigs; /* digits in res msu */
+ #if DECCHECK
+ if (decCheckOperands(res, lhs, rhs, set)) return res;
+ #endif
+
+ if (lhs->exponent!=0 || decNumberIsSpecial(lhs) || decNumberIsNegative(lhs)
+ || rhs->exponent!=0 || decNumberIsSpecial(rhs) || decNumberIsNegative(rhs)) {
+ decStatus(res, DEC_Invalid_operation, set);
+ return res;
+ }
+ /* operands are valid */
+ ua=lhs->lsu; /* bottom-up */
+ ub=rhs->lsu; /* .. */
+ uc=res->lsu; /* .. */
+ msua=ua+D2U(lhs->digits)-1; /* -> msu of lhs */
+ msub=ub+D2U(rhs->digits)-1; /* -> msu of rhs */
+ msuc=uc+D2U(set->digits)-1; /* -> msu of result */
+ msudigs=MSUDIGITS(set->digits); /* [faster than remainder] */
+ for (; uc<=msuc; ua++, ub++, uc++) { /* Unit loop */
+ Unit a, b; /* extract units */
+ if (ua>msua) a=0;
+ else a=*ua;
+ if (ub>msub) b=0;
+ else b=*ub;
+ *uc=0; /* can now write back */
+ if (a|b) { /* maybe 1 bits to examine */
+ Int i, j;
+ /* This loop could be unrolled and/or use BIN2BCD tables */
+ for (i=0; i<DECDPUN; i++) {
+ if ((a^b)&1) *uc=*uc+(Unit)powers[i]; /* effect XOR */
+ j=a%10;
+ a=a/10;
+ j|=b%10;
+ b=b/10;
+ if (j>1) {
+ decStatus(res, DEC_Invalid_operation, set);
+ return res;
+ }
+ if (uc==msuc && i==msudigs-1) break; /* just did final digit */
+ } /* each digit */
+ } /* non-zero */
+ } /* each unit */
+ /* [here uc-1 is the msu of the result] */
+ res->digits=decGetDigits(res->lsu, uc-res->lsu);
+ res->exponent=0; /* integer */
+ res->bits=0; /* sign=0 */
+ return res; /* [no status to set] */
+ } /* decNumberXor */
+
+
+/* ================================================================== */
+/* Utility routines */
+/* ================================================================== */
+
+/* ------------------------------------------------------------------ */
+/* decNumberClass -- return the decClass of a decNumber */
+/* dn -- the decNumber to test */
+/* set -- the context to use for Emin */
+/* returns the decClass enum */
+/* ------------------------------------------------------------------ */
+enum decClass decNumberClass(const decNumber *dn, decContext *set) {
+ if (decNumberIsSpecial(dn)) {
+ if (decNumberIsQNaN(dn)) return DEC_CLASS_QNAN;
+ if (decNumberIsSNaN(dn)) return DEC_CLASS_SNAN;
+ /* must be an infinity */
+ if (decNumberIsNegative(dn)) return DEC_CLASS_NEG_INF;
+ return DEC_CLASS_POS_INF;
+ }
+ /* is finite */
+ if (decNumberIsNormal(dn, set)) { /* most common */
+ if (decNumberIsNegative(dn)) return DEC_CLASS_NEG_NORMAL;
+ return DEC_CLASS_POS_NORMAL;
+ }
+ /* is subnormal or zero */
+ if (decNumberIsZero(dn)) { /* most common */
+ if (decNumberIsNegative(dn)) return DEC_CLASS_NEG_ZERO;
+ return DEC_CLASS_POS_ZERO;
+ }
+ if (decNumberIsNegative(dn)) return DEC_CLASS_NEG_SUBNORMAL;
+ return DEC_CLASS_POS_SUBNORMAL;
+ } /* decNumberClass */
+
+/* ------------------------------------------------------------------ */
+/* decNumberClassToString -- convert decClass to a string */
+/* */
+/* eclass is a valid decClass */
+/* returns a constant string describing the class (max 13+1 chars) */
+/* ------------------------------------------------------------------ */
+const char *decNumberClassToString(enum decClass eclass) {
+ if (eclass==DEC_CLASS_POS_NORMAL) return DEC_ClassString_PN;
+ if (eclass==DEC_CLASS_NEG_NORMAL) return DEC_ClassString_NN;
+ if (eclass==DEC_CLASS_POS_ZERO) return DEC_ClassString_PZ;
+ if (eclass==DEC_CLASS_NEG_ZERO) return DEC_ClassString_NZ;
+ if (eclass==DEC_CLASS_POS_SUBNORMAL) return DEC_ClassString_PS;
+ if (eclass==DEC_CLASS_NEG_SUBNORMAL) return DEC_ClassString_NS;
+ if (eclass==DEC_CLASS_POS_INF) return DEC_ClassString_PI;
+ if (eclass==DEC_CLASS_NEG_INF) return DEC_ClassString_NI;
+ if (eclass==DEC_CLASS_QNAN) return DEC_ClassString_QN;
+ if (eclass==DEC_CLASS_SNAN) return DEC_ClassString_SN;
+ return DEC_ClassString_UN; /* Unknown */
+ } /* decNumberClassToString */
+
+/* ------------------------------------------------------------------ */
+/* decNumberCopy -- copy a number */
+/* */
+/* dest is the target decNumber */
+/* src is the source decNumber */
+/* returns dest */
+/* */
+/* (dest==src is allowed and is a no-op) */
+/* All fields are updated as required. This is a utility operation, */
+/* so special values are unchanged and no error is possible. */
+/* ------------------------------------------------------------------ */
+decNumber * decNumberCopy(decNumber *dest, const decNumber *src) {
+
+ #if DECCHECK
+ if (src==NULL) return decNumberZero(dest);
+ #endif
+
+ if (dest==src) return dest; /* no copy required */
+
+ /* Use explicit assignments here as structure assignment could copy */
+ /* more than just the lsu (for small DECDPUN). This would not affect */
+ /* the value of the results, but could disturb test harness spill */
+ /* checking. */
+ dest->bits=src->bits;
+ dest->exponent=src->exponent;
+ dest->digits=src->digits;
+ dest->lsu[0]=src->lsu[0];
+ if (src->digits>DECDPUN) { /* more Units to come */
+ const Unit *smsup, *s; /* work */
+ Unit *d; /* .. */
+ /* memcpy for the remaining Units would be safe as they cannot */
+ /* overlap. However, this explicit loop is faster in short cases. */
+ d=dest->lsu+1; /* -> first destination */
+ smsup=src->lsu+D2U(src->digits); /* -> source msu+1 */
+ for (s=src->lsu+1; s<smsup; s++, d++) *d=*s;
+ }
+ return dest;
+ } /* decNumberCopy */
+
+/* ------------------------------------------------------------------ */
+/* decNumberCopyAbs -- quiet absolute value operator */
+/* */
+/* This sets C = abs(A) */
+/* */
+/* res is C, the result. C may be A */
+/* rhs is A */
+/* */
+/* C must have space for set->digits digits. */
+/* No exception or error can occur; this is a quiet bitwise operation.*/
+/* See also decNumberAbs for a checking version of this. */
+/* ------------------------------------------------------------------ */
+decNumber * decNumberCopyAbs(decNumber *res, const decNumber *rhs) {
+ #if DECCHECK
+ if (decCheckOperands(res, DECUNUSED, rhs, DECUNCONT)) return res;
+ #endif
+ decNumberCopy(res, rhs);
+ res->bits&=~DECNEG; /* turn off sign */
+ return res;
+ } /* decNumberCopyAbs */
+
+/* ------------------------------------------------------------------ */
+/* decNumberCopyNegate -- quiet negate value operator */
+/* */
+/* This sets C = negate(A) */
+/* */
+/* res is C, the result. C may be A */
+/* rhs is A */
+/* */
+/* C must have space for set->digits digits. */
+/* No exception or error can occur; this is a quiet bitwise operation.*/
+/* See also decNumberMinus for a checking version of this. */
+/* ------------------------------------------------------------------ */
+decNumber * decNumberCopyNegate(decNumber *res, const decNumber *rhs) {
+ #if DECCHECK
+ if (decCheckOperands(res, DECUNUSED, rhs, DECUNCONT)) return res;
+ #endif
+ decNumberCopy(res, rhs);
+ res->bits^=DECNEG; /* invert the sign */
+ return res;
+ } /* decNumberCopyNegate */
+
+/* ------------------------------------------------------------------ */
+/* decNumberCopySign -- quiet copy and set sign operator */
+/* */
+/* This sets C = A with the sign of B */
+/* */
+/* res is C, the result. C may be A */
+/* lhs is A */
+/* rhs is B */
+/* */
+/* C must have space for set->digits digits. */
+/* No exception or error can occur; this is a quiet bitwise operation.*/
+/* ------------------------------------------------------------------ */
+decNumber * decNumberCopySign(decNumber *res, const decNumber *lhs,
+ const decNumber *rhs) {
+ uByte sign; /* rhs sign */
+ #if DECCHECK
+ if (decCheckOperands(res, DECUNUSED, rhs, DECUNCONT)) return res;
+ #endif
+ sign=rhs->bits & DECNEG; /* save sign bit */
+ decNumberCopy(res, lhs);
+ res->bits&=~DECNEG; /* clear the sign */
+ res->bits|=sign; /* set from rhs */
+ return res;
+ } /* decNumberCopySign */
+
+/* ------------------------------------------------------------------ */
+/* decNumberGetBCD -- get the coefficient in BCD8 */
+/* dn is the source decNumber */
+/* bcd is the uInt array that will receive dn->digits BCD bytes, */
+/* most-significant at offset 0 */
+/* returns bcd */
+/* */
+/* bcd must have at least dn->digits bytes. No error is possible; if */
+/* dn is a NaN or Infinite, digits must be 1 and the coefficient 0. */
+/* ------------------------------------------------------------------ */
+uByte * decNumberGetBCD(const decNumber *dn, uint8_t *bcd) {
+ uByte *ub=bcd+dn->digits-1; /* -> lsd */
+ const Unit *up=dn->lsu; /* Unit pointer, -> lsu */
+
+ #if DECDPUN==1 /* trivial simple copy */
+ for (; ub>=bcd; ub--, up++) *ub=*up;
+ #else /* chopping needed */
+ uInt u=*up; /* work */
+ uInt cut=DECDPUN; /* downcounter through unit */
+ for (; ub>=bcd; ub--) {
+ *ub=(uByte)(u%10); /* [*6554 trick inhibits, here] */
+ u=u/10;
+ cut--;
+ if (cut>0) continue; /* more in this unit */
+ up++;
+ u=*up;
+ cut=DECDPUN;
+ }
+ #endif
+ return bcd;
+ } /* decNumberGetBCD */
+
+/* ------------------------------------------------------------------ */
+/* decNumberSetBCD -- set (replace) the coefficient from BCD8 */
+/* dn is the target decNumber */
+/* bcd is the uInt array that will source n BCD bytes, most- */
+/* significant at offset 0 */
+/* n is the number of digits in the source BCD array (bcd) */
+/* returns dn */
+/* */
+/* dn must have space for at least n digits. No error is possible; */
+/* if dn is a NaN, or Infinite, or is to become a zero, n must be 1 */
+/* and bcd[0] zero. */
+/* ------------------------------------------------------------------ */
+decNumber * decNumberSetBCD(decNumber *dn, const uByte *bcd, uInt n) {
+ Unit *up=dn->lsu+D2U(dn->digits)-1; /* -> msu [target pointer] */
+ const uByte *ub=bcd; /* -> source msd */
+
+ #if DECDPUN==1 /* trivial simple copy */
+ for (; ub<bcd+n; ub++, up--) *up=*ub;
+ #else /* some assembly needed */
+ /* calculate how many digits in msu, and hence first cut */
+ Int cut=MSUDIGITS(n); /* [faster than remainder] */
+ for (;up>=dn->lsu; up--) { /* each Unit from msu */
+ *up=0; /* will take <=DECDPUN digits */
+ for (; cut>0; ub++, cut--) *up=X10(*up)+*ub;
+ cut=DECDPUN; /* next Unit has all digits */
+ }
+ #endif
+ dn->digits=n; /* set digit count */
+ return dn;
+ } /* decNumberSetBCD */
+
+/* ------------------------------------------------------------------ */
+/* decNumberIsNormal -- test normality of a decNumber */
+/* dn is the decNumber to test */
+/* set is the context to use for Emin */
+/* returns 1 if |dn| is finite and >=Nmin, 0 otherwise */
+/* ------------------------------------------------------------------ */
+Int decNumberIsNormal(const decNumber *dn, decContext *set) {
+ Int ae; /* adjusted exponent */
+ #if DECCHECK
+ if (decCheckOperands(DECUNRESU, DECUNUSED, dn, set)) return 0;
+ #endif
+
+ if (decNumberIsSpecial(dn)) return 0; /* not finite */
+ if (decNumberIsZero(dn)) return 0; /* not non-zero */
+
+ ae=dn->exponent+dn->digits-1; /* adjusted exponent */
+ if (ae<set->emin) return 0; /* is subnormal */
+ return 1;
+ } /* decNumberIsNormal */
+
+/* ------------------------------------------------------------------ */
+/* decNumberIsSubnormal -- test subnormality of a decNumber */
+/* dn is the decNumber to test */
+/* set is the context to use for Emin */
+/* returns 1 if |dn| is finite, non-zero, and <Nmin, 0 otherwise */
+/* ------------------------------------------------------------------ */
+Int decNumberIsSubnormal(const decNumber *dn, decContext *set) {
+ Int ae; /* adjusted exponent */
+ #if DECCHECK
+ if (decCheckOperands(DECUNRESU, DECUNUSED, dn, set)) return 0;
+ #endif
+
+ if (decNumberIsSpecial(dn)) return 0; /* not finite */
+ if (decNumberIsZero(dn)) return 0; /* not non-zero */
+
+ ae=dn->exponent+dn->digits-1; /* adjusted exponent */
+ if (ae<set->emin) return 1; /* is subnormal */
+ return 0;
+ } /* decNumberIsSubnormal */
+
+/* ------------------------------------------------------------------ */
+/* decNumberTrim -- remove insignificant zeros */
+/* */
+/* dn is the number to trim */
+/* returns dn */
+/* */
+/* All fields are updated as required. This is a utility operation, */
+/* so special values are unchanged and no error is possible. */
+/* ------------------------------------------------------------------ */
+decNumber * decNumberTrim(decNumber *dn) {
+ Int dropped; /* work */
+ decContext set; /* .. */
+ #if DECCHECK
+ if (decCheckOperands(DECUNRESU, DECUNUSED, dn, DECUNCONT)) return dn;
+ #endif
+ decContextDefault(&set, DEC_INIT_BASE); /* clamp=0 */
+ return decTrim(dn, &set, 0, &dropped);
+ } /* decNumberTrim */
+
+/* ------------------------------------------------------------------ */
+/* decNumberVersion -- return the name and version of this module */
+/* */
+/* No error is possible. */
+/* ------------------------------------------------------------------ */
+const char * decNumberVersion(void) {
+ return DECVERSION;
+ } /* decNumberVersion */
+
+/* ------------------------------------------------------------------ */
+/* decNumberZero -- set a number to 0 */
+/* */
+/* dn is the number to set, with space for one digit */
+/* returns dn */
+/* */
+/* No error is possible. */
+/* ------------------------------------------------------------------ */
+/* Memset is not used as it is much slower in some environments. */
+decNumber * decNumberZero(decNumber *dn) {
+
+ #if DECCHECK
+ if (decCheckOperands(dn, DECUNUSED, DECUNUSED, DECUNCONT)) return dn;
+ #endif
+
+ dn->bits=0;
+ dn->exponent=0;
+ dn->digits=1;
+ dn->lsu[0]=0;
+ return dn;
+ } /* decNumberZero */
+
+/* ================================================================== */
+/* Local routines */
+/* ================================================================== */
+
+/* ------------------------------------------------------------------ */
+/* decToString -- lay out a number into a string */
+/* */
+/* dn is the number to lay out */
+/* string is where to lay out the number */
+/* eng is 1 if Engineering, 0 if Scientific */
+/* */
+/* string must be at least dn->digits+14 characters long */
+/* No error is possible. */
+/* */
+/* Note that this routine can generate a -0 or 0.000. These are */
+/* never generated in subset to-number or arithmetic, but can occur */
+/* in non-subset arithmetic (e.g., -1*0 or 1.234-1.234). */
+/* ------------------------------------------------------------------ */
+/* If DECCHECK is enabled the string "?" is returned if a number is */
+/* invalid. */
+static void decToString(const decNumber *dn, char *string, Flag eng) {
+ Int exp=dn->exponent; /* local copy */
+ Int e; /* E-part value */
+ Int pre; /* digits before the '.' */
+ Int cut; /* for counting digits in a Unit */
+ char *c=string; /* work [output pointer] */
+ const Unit *up=dn->lsu+D2U(dn->digits)-1; /* -> msu [input pointer] */
+ uInt u, pow; /* work */
+
+ #if DECCHECK
+ if (decCheckOperands(DECUNRESU, dn, DECUNUSED, DECUNCONT)) {
+ strcpy(string, "?");
+ return;}
+ #endif
+
+ if (decNumberIsNegative(dn)) { /* Negatives get a minus */
+ *c='-';
+ c++;
+ }
+ if (dn->bits&DECSPECIAL) { /* Is a special value */
+ if (decNumberIsInfinite(dn)) {
+ strcpy(c, "Inf");
+ strcpy(c+3, "inity");
+ return;}
+ /* a NaN */
+ if (dn->bits&DECSNAN) { /* signalling NaN */
+ *c='s';
+ c++;
+ }
+ strcpy(c, "NaN");
+ c+=3; /* step past */
+ /* if not a clean non-zero coefficient, that's all there is in a */
+ /* NaN string */
+ if (exp!=0 || (*dn->lsu==0 && dn->digits==1)) return;
+ /* [drop through to add integer] */
+ }
+
+ /* calculate how many digits in msu, and hence first cut */
+ cut=MSUDIGITS(dn->digits); /* [faster than remainder] */
+ cut--; /* power of ten for digit */
+
+ if (exp==0) { /* simple integer [common fastpath] */
+ for (;up>=dn->lsu; up--) { /* each Unit from msu */
+ u=*up; /* contains DECDPUN digits to lay out */
+ for (; cut>=0; c++, cut--) TODIGIT(u, cut, c, pow);
+ cut=DECDPUN-1; /* next Unit has all digits */
+ }
+ *c='\0'; /* terminate the string */
+ return;}
+
+ /* non-0 exponent -- assume plain form */
+ pre=dn->digits+exp; /* digits before '.' */
+ e=0; /* no E */
+ if ((exp>0) || (pre<-5)) { /* need exponential form */
+ e=exp+dn->digits-1; /* calculate E value */
+ pre=1; /* assume one digit before '.' */
+ if (eng && (e!=0)) { /* engineering: may need to adjust */
+ Int adj; /* adjustment */
+ /* The C remainder operator is undefined for negative numbers, so */
+ /* a positive remainder calculation must be used here */
+ if (e<0) {
+ adj=(-e)%3;
+ if (adj!=0) adj=3-adj;
+ }
+ else { /* e>0 */
+ adj=e%3;
+ }
+ e=e-adj;
+ /* if dealing with zero still produce an exponent which is a */
+ /* multiple of three, as expected, but there will only be the */
+ /* one zero before the E, still. Otherwise note the padding. */
+ if (!ISZERO(dn)) pre+=adj;
+ else { /* is zero */
+ if (adj!=0) { /* 0.00Esnn needed */
+ e=e+3;
+ pre=-(2-adj);
+ }
+ } /* zero */
+ } /* eng */
+ } /* need exponent */
+
+ /* lay out the digits of the coefficient, adding 0s and . as needed */
+ u=*up;
+ if (pre>0) { /* xxx.xxx or xx00 (engineering) form */
+ Int n=pre;
+ for (; pre>0; pre--, c++, cut--) {
+ if (cut<0) { /* need new Unit */
+ if (up==dn->lsu) break; /* out of input digits (pre>digits) */
+ up--;
+ cut=DECDPUN-1;
+ u=*up;
+ }
+ TODIGIT(u, cut, c, pow);
+ }
+ if (n<dn->digits) { /* more to come, after '.' */
+ *c='.'; c++;
+ for (;; c++, cut--) {
+ if (cut<0) { /* need new Unit */
+ if (up==dn->lsu) break; /* out of input digits */
+ up--;
+ cut=DECDPUN-1;
+ u=*up;
+ }
+ TODIGIT(u, cut, c, pow);
+ }
+ }
+ else for (; pre>0; pre--, c++) *c='0'; /* 0 padding (for engineering) needed */
+ }
+ else { /* 0.xxx or 0.000xxx form */
+ *c='0'; c++;
+ *c='.'; c++;
+ for (; pre<0; pre++, c++) *c='0'; /* add any 0's after '.' */
+ for (; ; c++, cut--) {
+ if (cut<0) { /* need new Unit */
+ if (up==dn->lsu) break; /* out of input digits */
+ up--;
+ cut=DECDPUN-1;
+ u=*up;
+ }
+ TODIGIT(u, cut, c, pow);
+ }
+ }
+
+ /* Finally add the E-part, if needed. It will never be 0, has a
+ base maximum and minimum of +999999999 through -999999999, but
+ could range down to -1999999998 for anormal numbers */
+ if (e!=0) {
+ Flag had=0; /* 1=had non-zero */
+ *c='E'; c++;
+ *c='+'; c++; /* assume positive */
+ u=e; /* .. */
+ if (e<0) {
+ *(c-1)='-'; /* oops, need - */
+ u=-e; /* uInt, please */
+ }
+ /* lay out the exponent [_itoa or equivalent is not ANSI C] */
+ for (cut=9; cut>=0; cut--) {
+ TODIGIT(u, cut, c, pow);
+ if (*c=='0' && !had) continue; /* skip leading zeros */
+ had=1; /* had non-0 */
+ c++; /* step for next */
+ } /* cut */
+ }
+ *c='\0'; /* terminate the string (all paths) */
+ return;
+ } /* decToString */
+
+/* ------------------------------------------------------------------ */
+/* decAddOp -- add/subtract operation */
+/* */
+/* This computes C = A + B */
+/* */
+/* res is C, the result. C may be A and/or B (e.g., X=X+X) */
+/* lhs is A */
+/* rhs is B */
+/* set is the context */
+/* negate is DECNEG if rhs should be negated, or 0 otherwise */
+/* status accumulates status for the caller */
+/* */
+/* C must have space for set->digits digits. */
+/* Inexact in status must be 0 for correct Exact zero sign in result */
+/* ------------------------------------------------------------------ */
+/* If possible, the coefficient is calculated directly into C. */
+/* However, if: */
+/* -- a digits+1 calculation is needed because the numbers are */
+/* unaligned and span more than set->digits digits */
+/* -- a carry to digits+1 digits looks possible */
+/* -- C is the same as A or B, and the result would destructively */
+/* overlap the A or B coefficient */
+/* then the result must be calculated into a temporary buffer. In */
+/* this case a local (stack) buffer is used if possible, and only if */
+/* too long for that does malloc become the final resort. */
+/* */
+/* Misalignment is handled as follows: */
+/* Apad: (AExp>BExp) Swap operands and proceed as for BExp>AExp. */
+/* BPad: Apply the padding by a combination of shifting (whole */
+/* units) and multiplication (part units). */
+/* */
+/* Addition, especially x=x+1, is speed-critical. */
+/* The static buffer is larger than might be expected to allow for */
+/* calls from higher-level funtions (notable exp). */
+/* ------------------------------------------------------------------ */
+static decNumber * decAddOp(decNumber *res, const decNumber *lhs,
+ const decNumber *rhs, decContext *set,
+ uByte negate, uInt *status) {
+ #if DECSUBSET
+ decNumber *alloclhs=NULL; /* non-NULL if rounded lhs allocated */
+ decNumber *allocrhs=NULL; /* .., rhs */
+ #endif
+ Int rhsshift; /* working shift (in Units) */
+ Int maxdigits; /* longest logical length */
+ Int mult; /* multiplier */
+ Int residue; /* rounding accumulator */
+ uByte bits; /* result bits */
+ Flag diffsign; /* non-0 if arguments have different sign */
+ Unit *acc; /* accumulator for result */
+ Unit accbuff[SD2U(DECBUFFER*2+20)]; /* local buffer [*2+20 reduces many */
+ /* allocations when called from */
+ /* other operations, notable exp] */
+ Unit *allocacc=NULL; /* -> allocated acc buffer, iff allocated */
+ Int reqdigits=set->digits; /* local copy; requested DIGITS */
+ Int padding; /* work */
+
+ #if DECCHECK
+ if (decCheckOperands(res, lhs, rhs, set)) return res;
+ #endif
+
+ do { /* protect allocated storage */
+ #if DECSUBSET
+ if (!set->extended) {
+ /* reduce operands and set lostDigits status, as needed */
+ if (lhs->digits>reqdigits) {
+ alloclhs=decRoundOperand(lhs, set, status);
+ if (alloclhs==NULL) break;
+ lhs=alloclhs;
+ }
+ if (rhs->digits>reqdigits) {
+ allocrhs=decRoundOperand(rhs, set, status);
+ if (allocrhs==NULL) break;
+ rhs=allocrhs;
+ }
+ }
+ #endif
+ /* [following code does not require input rounding] */
+
+ /* note whether signs differ [used all paths] */
+ diffsign=(Flag)((lhs->bits^rhs->bits^negate)&DECNEG);
+
+ /* handle infinities and NaNs */
+ if (SPECIALARGS) { /* a special bit set */
+ if (SPECIALARGS & (DECSNAN | DECNAN)) /* a NaN */
+ decNaNs(res, lhs, rhs, set, status);
+ else { /* one or two infinities */
+ if (decNumberIsInfinite(lhs)) { /* LHS is infinity */
+ /* two infinities with different signs is invalid */
+ if (decNumberIsInfinite(rhs) && diffsign) {
+ *status|=DEC_Invalid_operation;
+ break;
+ }
+ bits=lhs->bits & DECNEG; /* get sign from LHS */
+ }
+ else bits=(rhs->bits^negate) & DECNEG;/* RHS must be Infinity */
+ bits|=DECINF;
+ decNumberZero(res);
+ res->bits=bits; /* set +/- infinity */
+ } /* an infinity */
+ break;
+ }
+
+ /* Quick exit for add 0s; return the non-0, modified as need be */
+ if (ISZERO(lhs)) {
+ Int adjust; /* work */
+ Int lexp=lhs->exponent; /* save in case LHS==RES */
+ bits=lhs->bits; /* .. */
+ residue=0; /* clear accumulator */
+ decCopyFit(res, rhs, set, &residue, status); /* copy (as needed) */
+ res->bits^=negate; /* flip if rhs was negated */
+ #if DECSUBSET
+ if (set->extended) { /* exponents on zeros count */
+ #endif
+ /* exponent will be the lower of the two */
+ adjust=lexp-res->exponent; /* adjustment needed [if -ve] */
+ if (ISZERO(res)) { /* both 0: special IEEE 854 rules */
+ if (adjust<0) res->exponent=lexp; /* set exponent */
+ /* 0-0 gives +0 unless rounding to -infinity, and -0-0 gives -0 */
+ if (diffsign) {
+ if (set->round!=DEC_ROUND_FLOOR) res->bits=0;
+ else res->bits=DECNEG; /* preserve 0 sign */
+ }
+ }
+ else { /* non-0 res */
+ if (adjust<0) { /* 0-padding needed */
+ if ((res->digits-adjust)>set->digits) {
+ adjust=res->digits-set->digits; /* to fit exactly */
+ *status|=DEC_Rounded; /* [but exact] */
+ }
+ res->digits=decShiftToMost(res->lsu, res->digits, -adjust);
+ res->exponent+=adjust; /* set the exponent. */
+ }
+ } /* non-0 res */
+ #if DECSUBSET
+ } /* extended */
+ #endif
+ decFinish(res, set, &residue, status); /* clean and finalize */
+ break;}
+
+ if (ISZERO(rhs)) { /* [lhs is non-zero] */
+ Int adjust; /* work */
+ Int rexp=rhs->exponent; /* save in case RHS==RES */
+ bits=rhs->bits; /* be clean */
+ residue=0; /* clear accumulator */
+ decCopyFit(res, lhs, set, &residue, status); /* copy (as needed) */
+ #if DECSUBSET
+ if (set->extended) { /* exponents on zeros count */
+ #endif
+ /* exponent will be the lower of the two */
+ /* [0-0 case handled above] */
+ adjust=rexp-res->exponent; /* adjustment needed [if -ve] */
+ if (adjust<0) { /* 0-padding needed */
+ if ((res->digits-adjust)>set->digits) {
+ adjust=res->digits-set->digits; /* to fit exactly */
+ *status|=DEC_Rounded; /* [but exact] */
+ }
+ res->digits=decShiftToMost(res->lsu, res->digits, -adjust);
+ res->exponent+=adjust; /* set the exponent. */
+ }
+ #if DECSUBSET
+ } /* extended */
+ #endif
+ decFinish(res, set, &residue, status); /* clean and finalize */
+ break;}
+
+ /* [NB: both fastpath and mainpath code below assume these cases */
+ /* (notably 0-0) have already been handled] */
+
+ /* calculate the padding needed to align the operands */
+ padding=rhs->exponent-lhs->exponent;
+
+ /* Fastpath cases where the numbers are aligned and normal, the RHS */
+ /* is all in one unit, no operand rounding is needed, and no carry, */
+ /* lengthening, or borrow is needed */
+ if (padding==0
+ && rhs->digits<=DECDPUN
+ && rhs->exponent>=set->emin /* [some normals drop through] */
+ && rhs->exponent<=set->emax-set->digits+1 /* [could clamp] */
+ && rhs->digits<=reqdigits
+ && lhs->digits<=reqdigits) {
+ Int partial=*lhs->lsu;
+ if (!diffsign) { /* adding */
+ partial+=*rhs->lsu;
+ if ((partial<=DECDPUNMAX) /* result fits in unit */
+ && (lhs->digits>=DECDPUN || /* .. and no digits-count change */
+ partial<(Int)powers[lhs->digits])) { /* .. */
+ if (res!=lhs) decNumberCopy(res, lhs); /* not in place */
+ *res->lsu=(Unit)partial; /* [copy could have overwritten RHS] */
+ break;
+ }
+ /* else drop out for careful add */
+ }
+ else { /* signs differ */
+ partial-=*rhs->lsu;
+ if (partial>0) { /* no borrow needed, and non-0 result */
+ if (res!=lhs) decNumberCopy(res, lhs); /* not in place */
+ *res->lsu=(Unit)partial;
+ /* this could have reduced digits [but result>0] */
+ res->digits=decGetDigits(res->lsu, D2U(res->digits));
+ break;
+ }
+ /* else drop out for careful subtract */
+ }
+ }
+
+ /* Now align (pad) the lhs or rhs so they can be added or */
+ /* subtracted, as necessary. If one number is much larger than */
+ /* the other (that is, if in plain form there is a least one */
+ /* digit between the lowest digit of one and the highest of the */
+ /* other) padding with up to DIGITS-1 trailing zeros may be */
+ /* needed; then apply rounding (as exotic rounding modes may be */
+ /* affected by the residue). */
+ rhsshift=0; /* rhs shift to left (padding) in Units */
+ bits=lhs->bits; /* assume sign is that of LHS */
+ mult=1; /* likely multiplier */
+
+ /* [if padding==0 the operands are aligned; no padding is needed] */
+ if (padding!=0) {
+ /* some padding needed; always pad the RHS, as any required */
+ /* padding can then be effected by a simple combination of */
+ /* shifts and a multiply */
+ Flag swapped=0;
+ if (padding<0) { /* LHS needs the padding */
+ const decNumber *t;
+ padding=-padding; /* will be +ve */
+ bits=(uByte)(rhs->bits^negate); /* assumed sign is now that of RHS */
+ t=lhs; lhs=rhs; rhs=t;
+ swapped=1;
+ }
+
+ /* If, after pad, rhs would be longer than lhs by digits+1 or */
+ /* more then lhs cannot affect the answer, except as a residue, */
+ /* so only need to pad up to a length of DIGITS+1. */
+ if (rhs->digits+padding > lhs->digits+reqdigits+1) {
+ /* The RHS is sufficient */
+ /* for residue use the relative sign indication... */
+ Int shift=reqdigits-rhs->digits; /* left shift needed */
+ residue=1; /* residue for rounding */
+ if (diffsign) residue=-residue; /* signs differ */
+ /* copy, shortening if necessary */
+ decCopyFit(res, rhs, set, &residue, status);
+ /* if it was already shorter, then need to pad with zeros */
+ if (shift>0) {
+ res->digits=decShiftToMost(res->lsu, res->digits, shift);
+ res->exponent-=shift; /* adjust the exponent. */
+ }
+ /* flip the result sign if unswapped and rhs was negated */
+ if (!swapped) res->bits^=negate;
+ decFinish(res, set, &residue, status); /* done */
+ break;}
+
+ /* LHS digits may affect result */
+ rhsshift=D2U(padding+1)-1; /* this much by Unit shift .. */
+ mult=powers[padding-(rhsshift*DECDPUN)]; /* .. this by multiplication */
+ } /* padding needed */
+
+ if (diffsign) mult=-mult; /* signs differ */
+
+ /* determine the longer operand */
+ maxdigits=rhs->digits+padding; /* virtual length of RHS */
+ if (lhs->digits>maxdigits) maxdigits=lhs->digits;
+
+ /* Decide on the result buffer to use; if possible place directly */
+ /* into result. */
+ acc=res->lsu; /* assume add direct to result */
+ /* If destructive overlap, or the number is too long, or a carry or */
+ /* borrow to DIGITS+1 might be possible, a buffer must be used. */
+ /* [Might be worth more sophisticated tests when maxdigits==reqdigits] */
+ if ((maxdigits>=reqdigits) /* is, or could be, too large */
+ || (res==rhs && rhsshift>0)) { /* destructive overlap */
+ /* buffer needed, choose it; units for maxdigits digits will be */
+ /* needed, +1 Unit for carry or borrow */
+ Int need=D2U(maxdigits)+1;
+ acc=accbuff; /* assume use local buffer */
+ if (need*sizeof(Unit)>sizeof(accbuff)) {
+ /* printf("malloc add %ld %ld\n", need, sizeof(accbuff)); */
+ allocacc=(Unit *)malloc(need*sizeof(Unit));
+ if (allocacc==NULL) { /* hopeless -- abandon */
+ *status|=DEC_Insufficient_storage;
+ break;}
+ acc=allocacc;
+ }
+ }
+
+ res->bits=(uByte)(bits&DECNEG); /* it's now safe to overwrite.. */
+ res->exponent=lhs->exponent; /* .. operands (even if aliased) */
+
+ #if DECTRACE
+ decDumpAr('A', lhs->lsu, D2U(lhs->digits));
+ decDumpAr('B', rhs->lsu, D2U(rhs->digits));
+ printf(" :h: %ld %ld\n", rhsshift, mult);
+ #endif
+
+ /* add [A+B*m] or subtract [A+B*(-m)] */
+ res->digits=decUnitAddSub(lhs->lsu, D2U(lhs->digits),
+ rhs->lsu, D2U(rhs->digits),
+ rhsshift, acc, mult)
+ *DECDPUN; /* [units -> digits] */
+ if (res->digits<0) { /* borrowed... */
+ res->digits=-res->digits;
+ res->bits^=DECNEG; /* flip the sign */
+ }
+ #if DECTRACE
+ decDumpAr('+', acc, D2U(res->digits));
+ #endif
+
+ /* If a buffer was used the result must be copied back, possibly */
+ /* shortening. (If no buffer was used then the result must have */
+ /* fit, so can't need rounding and residue must be 0.) */
+ residue=0; /* clear accumulator */
+ if (acc!=res->lsu) {
+ #if DECSUBSET
+ if (set->extended) { /* round from first significant digit */
+ #endif
+ /* remove leading zeros that were added due to rounding up to */
+ /* integral Units -- before the test for rounding. */
+ if (res->digits>reqdigits)
+ res->digits=decGetDigits(acc, D2U(res->digits));
+ decSetCoeff(res, set, acc, res->digits, &residue, status);
+ #if DECSUBSET
+ }
+ else { /* subset arithmetic rounds from original significant digit */
+ /* May have an underestimate. This only occurs when both */
+ /* numbers fit in DECDPUN digits and are padding with a */
+ /* negative multiple (-10, -100...) and the top digit(s) become */
+ /* 0. (This only matters when using X3.274 rules where the */
+ /* leading zero could be included in the rounding.) */
+ if (res->digits<maxdigits) {
+ *(acc+D2U(res->digits))=0; /* ensure leading 0 is there */
+ res->digits=maxdigits;
+ }
+ else {
+ /* remove leading zeros that added due to rounding up to */
+ /* integral Units (but only those in excess of the original */
+ /* maxdigits length, unless extended) before test for rounding. */
+ if (res->digits>reqdigits) {
+ res->digits=decGetDigits(acc, D2U(res->digits));
+ if (res->digits<maxdigits) res->digits=maxdigits;
+ }
+ }
+ decSetCoeff(res, set, acc, res->digits, &residue, status);
+ /* Now apply rounding if needed before removing leading zeros. */
+ /* This is safe because subnormals are not a possibility */
+ if (residue!=0) {
+ decApplyRound(res, set, residue, status);
+ residue=0; /* did what needed to be done */
+ }
+ } /* subset */
+ #endif
+ } /* used buffer */
+
+ /* strip leading zeros [these were left on in case of subset subtract] */
+ res->digits=decGetDigits(res->lsu, D2U(res->digits));
+
+ /* apply checks and rounding */
+ decFinish(res, set, &residue, status);
+
+ /* "When the sum of two operands with opposite signs is exactly */
+ /* zero, the sign of that sum shall be '+' in all rounding modes */
+ /* except round toward -Infinity, in which mode that sign shall be */
+ /* '-'." [Subset zeros also never have '-', set by decFinish.] */
+ if (ISZERO(res) && diffsign
+ #if DECSUBSET
+ && set->extended
+ #endif
+ && (*status&DEC_Inexact)==0) {
+ if (set->round==DEC_ROUND_FLOOR) res->bits|=DECNEG; /* sign - */
+ else res->bits&=~DECNEG; /* sign + */
+ }
+ } while(0); /* end protected */
+
+ if (allocacc!=NULL) free(allocacc); /* drop any storage used */
+ #if DECSUBSET
+ if (allocrhs!=NULL) free(allocrhs); /* .. */
+ if (alloclhs!=NULL) free(alloclhs); /* .. */
+ #endif
+ return res;
+ } /* decAddOp */
+
+/* ------------------------------------------------------------------ */
+/* decDivideOp -- division operation */
+/* */
+/* This routine performs the calculations for all four division */
+/* operators (divide, divideInteger, remainder, remainderNear). */
+/* */
+/* C=A op B */
+/* */
+/* res is C, the result. C may be A and/or B (e.g., X=X/X) */
+/* lhs is A */
+/* rhs is B */
+/* set is the context */
+/* op is DIVIDE, DIVIDEINT, REMAINDER, or REMNEAR respectively. */
+/* status is the usual accumulator */
+/* */
+/* C must have space for set->digits digits. */
+/* */
+/* ------------------------------------------------------------------ */
+/* The underlying algorithm of this routine is the same as in the */
+/* 1981 S/370 implementation, that is, non-restoring long division */
+/* with bi-unit (rather than bi-digit) estimation for each unit */
+/* multiplier. In this pseudocode overview, complications for the */
+/* Remainder operators and division residues for exact rounding are */
+/* omitted for clarity. */
+/* */
+/* Prepare operands and handle special values */
+/* Test for x/0 and then 0/x */
+/* Exp =Exp1 - Exp2 */
+/* Exp =Exp +len(var1) -len(var2) */
+/* Sign=Sign1 * Sign2 */
+/* Pad accumulator (Var1) to double-length with 0's (pad1) */
+/* Pad Var2 to same length as Var1 */
+/* msu2pair/plus=1st 2 or 1 units of var2, +1 to allow for round */
+/* have=0 */
+/* Do until (have=digits+1 OR residue=0) */
+/* if exp<0 then if integer divide/residue then leave */
+/* this_unit=0 */
+/* Do forever */
+/* compare numbers */
+/* if <0 then leave inner_loop */
+/* if =0 then (* quick exit without subtract *) do */
+/* this_unit=this_unit+1; output this_unit */
+/* leave outer_loop; end */
+/* Compare lengths of numbers (mantissae): */
+/* If same then tops2=msu2pair -- {units 1&2 of var2} */
+/* else tops2=msu2plus -- {0, unit 1 of var2} */
+/* tops1=first_unit_of_Var1*10**DECDPUN +second_unit_of_var1 */
+/* mult=tops1/tops2 -- Good and safe guess at divisor */
+/* if mult=0 then mult=1 */
+/* this_unit=this_unit+mult */
+/* subtract */
+/* end inner_loop */
+/* if have\=0 | this_unit\=0 then do */
+/* output this_unit */
+/* have=have+1; end */
+/* var2=var2/10 */
+/* exp=exp-1 */
+/* end outer_loop */
+/* exp=exp+1 -- set the proper exponent */
+/* if have=0 then generate answer=0 */
+/* Return (Result is defined by Var1) */
+/* */
+/* ------------------------------------------------------------------ */
+/* Two working buffers are needed during the division; one (digits+ */
+/* 1) to accumulate the result, and the other (up to 2*digits+1) for */
+/* long subtractions. These are acc and var1 respectively. */
+/* var1 is a copy of the lhs coefficient, var2 is the rhs coefficient.*/
+/* The static buffers may be larger than might be expected to allow */
+/* for calls from higher-level funtions (notable exp). */
+/* ------------------------------------------------------------------ */
+static decNumber * decDivideOp(decNumber *res,
+ const decNumber *lhs, const decNumber *rhs,
+ decContext *set, Flag op, uInt *status) {
+ #if DECSUBSET
+ decNumber *alloclhs=NULL; /* non-NULL if rounded lhs allocated */
+ decNumber *allocrhs=NULL; /* .., rhs */
+ #endif
+ Unit accbuff[SD2U(DECBUFFER+DECDPUN+10)]; /* local buffer */
+ Unit *acc=accbuff; /* -> accumulator array for result */
+ Unit *allocacc=NULL; /* -> allocated buffer, iff allocated */
+ Unit *accnext; /* -> where next digit will go */
+ Int acclength; /* length of acc needed [Units] */
+ Int accunits; /* count of units accumulated */
+ Int accdigits; /* count of digits accumulated */
+
+ Unit varbuff[SD2U(DECBUFFER*2+DECDPUN)*sizeof(Unit)]; /* buffer for var1 */
+ Unit *var1=varbuff; /* -> var1 array for long subtraction */
+ Unit *varalloc=NULL; /* -> allocated buffer, iff used */
+ Unit *msu1; /* -> msu of var1 */
+
+ const Unit *var2; /* -> var2 array */
+ const Unit *msu2; /* -> msu of var2 */
+ Int msu2plus; /* msu2 plus one [does not vary] */
+ eInt msu2pair; /* msu2 pair plus one [does not vary] */
+
+ Int var1units, var2units; /* actual lengths */
+ Int var2ulen; /* logical length (units) */
+ Int var1initpad=0; /* var1 initial padding (digits) */
+ Int maxdigits; /* longest LHS or required acc length */
+ Int mult; /* multiplier for subtraction */
+ Unit thisunit; /* current unit being accumulated */
+ Int residue; /* for rounding */
+ Int reqdigits=set->digits; /* requested DIGITS */
+ Int exponent; /* working exponent */
+ Int maxexponent=0; /* DIVIDE maximum exponent if unrounded */
+ uByte bits; /* working sign */
+ Unit *target; /* work */
+ const Unit *source; /* .. */
+ uInt const *pow; /* .. */
+ Int shift, cut; /* .. */
+ #if DECSUBSET
+ Int dropped; /* work */
+ #endif
+
+ #if DECCHECK
+ if (decCheckOperands(res, lhs, rhs, set)) return res;
+ #endif
+
+ do { /* protect allocated storage */
+ #if DECSUBSET
+ if (!set->extended) {
+ /* reduce operands and set lostDigits status, as needed */
+ if (lhs->digits>reqdigits) {
+ alloclhs=decRoundOperand(lhs, set, status);
+ if (alloclhs==NULL) break;
+ lhs=alloclhs;
+ }
+ if (rhs->digits>reqdigits) {
+ allocrhs=decRoundOperand(rhs, set, status);
+ if (allocrhs==NULL) break;
+ rhs=allocrhs;
+ }
+ }
+ #endif
+ /* [following code does not require input rounding] */
+
+ bits=(lhs->bits^rhs->bits)&DECNEG; /* assumed sign for divisions */
+
+ /* handle infinities and NaNs */
+ if (SPECIALARGS) { /* a special bit set */
+ if (SPECIALARGS & (DECSNAN | DECNAN)) { /* one or two NaNs */
+ decNaNs(res, lhs, rhs, set, status);
+ break;
+ }
+ /* one or two infinities */
+ if (decNumberIsInfinite(lhs)) { /* LHS (dividend) is infinite */
+ if (decNumberIsInfinite(rhs) || /* two infinities are invalid .. */
+ op & (REMAINDER | REMNEAR)) { /* as is remainder of infinity */
+ *status|=DEC_Invalid_operation;
+ break;
+ }
+ /* [Note that infinity/0 raises no exceptions] */
+ decNumberZero(res);
+ res->bits=bits|DECINF; /* set +/- infinity */
+ break;
+ }
+ else { /* RHS (divisor) is infinite */
+ residue=0;
+ if (op&(REMAINDER|REMNEAR)) {
+ /* result is [finished clone of] lhs */
+ decCopyFit(res, lhs, set, &residue, status);
+ }
+ else { /* a division */
+ decNumberZero(res);
+ res->bits=bits; /* set +/- zero */
+ /* for DIVIDEINT the exponent is always 0. For DIVIDE, result */
+ /* is a 0 with infinitely negative exponent, clamped to minimum */
+ if (op&DIVIDE) {
+ res->exponent=set->emin-set->digits+1;
+ *status|=DEC_Clamped;
+ }
+ }
+ decFinish(res, set, &residue, status);
+ break;
+ }
+ }
+
+ /* handle 0 rhs (x/0) */
+ if (ISZERO(rhs)) { /* x/0 is always exceptional */
+ if (ISZERO(lhs)) {
+ decNumberZero(res); /* [after lhs test] */
+ *status|=DEC_Division_undefined;/* 0/0 will become NaN */
+ }
+ else {
+ decNumberZero(res);
+ if (op&(REMAINDER|REMNEAR)) *status|=DEC_Invalid_operation;
+ else {
+ *status|=DEC_Division_by_zero; /* x/0 */
+ res->bits=bits|DECINF; /* .. is +/- Infinity */
+ }
+ }
+ break;}
+
+ /* handle 0 lhs (0/x) */
+ if (ISZERO(lhs)) { /* 0/x [x!=0] */
+ #if DECSUBSET
+ if (!set->extended) decNumberZero(res);
+ else {
+ #endif
+ if (op&DIVIDE) {
+ residue=0;
+ exponent=lhs->exponent-rhs->exponent; /* ideal exponent */
+ decNumberCopy(res, lhs); /* [zeros always fit] */
+ res->bits=bits; /* sign as computed */
+ res->exponent=exponent; /* exponent, too */
+ decFinalize(res, set, &residue, status); /* check exponent */
+ }
+ else if (op&DIVIDEINT) {
+ decNumberZero(res); /* integer 0 */
+ res->bits=bits; /* sign as computed */
+ }
+ else { /* a remainder */
+ exponent=rhs->exponent; /* [save in case overwrite] */
+ decNumberCopy(res, lhs); /* [zeros always fit] */
+ if (exponent<res->exponent) res->exponent=exponent; /* use lower */
+ }
+ #if DECSUBSET
+ }
+ #endif
+ break;}
+
+ /* Precalculate exponent. This starts off adjusted (and hence fits */
+ /* in 31 bits) and becomes the usual unadjusted exponent as the */
+ /* division proceeds. The order of evaluation is important, here, */
+ /* to avoid wrap. */
+ exponent=(lhs->exponent+lhs->digits)-(rhs->exponent+rhs->digits);
+
+ /* If the working exponent is -ve, then some quick exits are */
+ /* possible because the quotient is known to be <1 */
+ /* [for REMNEAR, it needs to be < -1, as -0.5 could need work] */
+ if (exponent<0 && !(op==DIVIDE)) {
+ if (op&DIVIDEINT) {
+ decNumberZero(res); /* integer part is 0 */
+ #if DECSUBSET
+ if (set->extended)
+ #endif
+ res->bits=bits; /* set +/- zero */
+ break;}
+ /* fastpath remainders so long as the lhs has the smaller */
+ /* (or equal) exponent */
+ if (lhs->exponent<=rhs->exponent) {
+ if (op&REMAINDER || exponent<-1) {
+ /* It is REMAINDER or safe REMNEAR; result is [finished */
+ /* clone of] lhs (r = x - 0*y) */
+ residue=0;
+ decCopyFit(res, lhs, set, &residue, status);
+ decFinish(res, set, &residue, status);
+ break;
+ }
+ /* [unsafe REMNEAR drops through] */
+ }
+ } /* fastpaths */
+
+ /* Long (slow) division is needed; roll up the sleeves... */
+
+ /* The accumulator will hold the quotient of the division. */
+ /* If it needs to be too long for stack storage, then allocate. */
+ acclength=D2U(reqdigits+DECDPUN); /* in Units */
+ if (acclength*sizeof(Unit)>sizeof(accbuff)) {
+ /* printf("malloc dvacc %ld units\n", acclength); */
+ allocacc=(Unit *)malloc(acclength*sizeof(Unit));
+ if (allocacc==NULL) { /* hopeless -- abandon */
+ *status|=DEC_Insufficient_storage;
+ break;}
+ acc=allocacc; /* use the allocated space */
+ }
+
+ /* var1 is the padded LHS ready for subtractions. */
+ /* If it needs to be too long for stack storage, then allocate. */
+ /* The maximum units needed for var1 (long subtraction) is: */
+ /* Enough for */
+ /* (rhs->digits+reqdigits-1) -- to allow full slide to right */
+ /* or (lhs->digits) -- to allow for long lhs */
+ /* whichever is larger */
+ /* +1 -- for rounding of slide to right */
+ /* +1 -- for leading 0s */
+ /* +1 -- for pre-adjust if a remainder or DIVIDEINT */
+ /* [Note: unused units do not participate in decUnitAddSub data] */
+ maxdigits=rhs->digits+reqdigits-1;
+ if (lhs->digits>maxdigits) maxdigits=lhs->digits;
+ var1units=D2U(maxdigits)+2;
+ /* allocate a guard unit above msu1 for REMAINDERNEAR */
+ if (!(op&DIVIDE)) var1units++;
+ if ((var1units+1)*sizeof(Unit)>sizeof(varbuff)) {
+ /* printf("malloc dvvar %ld units\n", var1units+1); */
+ varalloc=(Unit *)malloc((var1units+1)*sizeof(Unit));
+ if (varalloc==NULL) { /* hopeless -- abandon */
+ *status|=DEC_Insufficient_storage;
+ break;}
+ var1=varalloc; /* use the allocated space */
+ }
+
+ /* Extend the lhs and rhs to full long subtraction length. The lhs */
+ /* is truly extended into the var1 buffer, with 0 padding, so a */
+ /* subtract in place is always possible. The rhs (var2) has */
+ /* virtual padding (implemented by decUnitAddSub). */
+ /* One guard unit was allocated above msu1 for rem=rem+rem in */
+ /* REMAINDERNEAR. */
+ msu1=var1+var1units-1; /* msu of var1 */
+ source=lhs->lsu+D2U(lhs->digits)-1; /* msu of input array */
+ for (target=msu1; source>=lhs->lsu; source--, target--) *target=*source;
+ for (; target>=var1; target--) *target=0;
+
+ /* rhs (var2) is left-aligned with var1 at the start */
+ var2ulen=var1units; /* rhs logical length (units) */
+ var2units=D2U(rhs->digits); /* rhs actual length (units) */
+ var2=rhs->lsu; /* -> rhs array */
+ msu2=var2+var2units-1; /* -> msu of var2 [never changes] */
+ /* now set up the variables which will be used for estimating the */
+ /* multiplication factor. If these variables are not exact, add */
+ /* 1 to make sure that the multiplier is never overestimated. */
+ msu2plus=*msu2; /* it's value .. */
+ if (var2units>1) msu2plus++; /* .. +1 if any more */
+ msu2pair=(eInt)*msu2*(DECDPUNMAX+1);/* top two pair .. */
+ if (var2units>1) { /* .. [else treat 2nd as 0] */
+ msu2pair+=*(msu2-1); /* .. */
+ if (var2units>2) msu2pair++; /* .. +1 if any more */
+ }
+
+ /* The calculation is working in units, which may have leading zeros, */
+ /* but the exponent was calculated on the assumption that they are */
+ /* both left-aligned. Adjust the exponent to compensate: add the */
+ /* number of leading zeros in var1 msu and subtract those in var2 msu. */
+ /* [This is actually done by counting the digits and negating, as */
+ /* lead1=DECDPUN-digits1, and similarly for lead2.] */
+ for (pow=&powers[1]; *msu1>=*pow; pow++) exponent--;
+ for (pow=&powers[1]; *msu2>=*pow; pow++) exponent++;
+
+ /* Now, if doing an integer divide or remainder, ensure that */
+ /* the result will be Unit-aligned. To do this, shift the var1 */
+ /* accumulator towards least if need be. (It's much easier to */
+ /* do this now than to reassemble the residue afterwards, if */
+ /* doing a remainder.) Also ensure the exponent is not negative. */
+ if (!(op&DIVIDE)) {
+ Unit *u; /* work */
+ /* save the initial 'false' padding of var1, in digits */
+ var1initpad=(var1units-D2U(lhs->digits))*DECDPUN;
+ /* Determine the shift to do. */
+ if (exponent<0) cut=-exponent;
+ else cut=DECDPUN-exponent%DECDPUN;
+ decShiftToLeast(var1, var1units, cut);
+ exponent+=cut; /* maintain numerical value */
+ var1initpad-=cut; /* .. and reduce padding */
+ /* clean any most-significant units which were just emptied */
+ for (u=msu1; cut>=DECDPUN; cut-=DECDPUN, u--) *u=0;
+ } /* align */
+ else { /* is DIVIDE */
+ maxexponent=lhs->exponent-rhs->exponent; /* save */
+ /* optimization: if the first iteration will just produce 0, */
+ /* preadjust to skip it [valid for DIVIDE only] */
+ if (*msu1<*msu2) {
+ var2ulen--; /* shift down */
+ exponent-=DECDPUN; /* update the exponent */
+ }
+ }
+
+ /* ---- start the long-division loops ------------------------------ */
+ accunits=0; /* no units accumulated yet */
+ accdigits=0; /* .. or digits */
+ accnext=acc+acclength-1; /* -> msu of acc [NB: allows digits+1] */
+ for (;;) { /* outer forever loop */
+ thisunit=0; /* current unit assumed 0 */
+ /* find the next unit */
+ for (;;) { /* inner forever loop */
+ /* strip leading zero units [from either pre-adjust or from */
+ /* subtract last time around]. Leave at least one unit. */
+ for (; *msu1==0 && msu1>var1; msu1--) var1units--;
+
+ if (var1units<var2ulen) break; /* var1 too low for subtract */
+ if (var1units==var2ulen) { /* unit-by-unit compare needed */
+ /* compare the two numbers, from msu */
+ const Unit *pv1, *pv2;
+ Unit v2; /* units to compare */
+ pv2=msu2; /* -> msu */
+ for (pv1=msu1; ; pv1--, pv2--) {
+ /* v1=*pv1 -- always OK */
+ v2=0; /* assume in padding */
+ if (pv2>=var2) v2=*pv2; /* in range */
+ if (*pv1!=v2) break; /* no longer the same */
+ if (pv1==var1) break; /* done; leave pv1 as is */
+ }
+ /* here when all inspected or a difference seen */
+ if (*pv1<v2) break; /* var1 too low to subtract */
+ if (*pv1==v2) { /* var1 == var2 */
+ /* reach here if var1 and var2 are identical; subtraction */
+ /* would increase digit by one, and the residue will be 0 so */
+ /* the calculation is done; leave the loop with residue=0. */
+ thisunit++; /* as though subtracted */
+ *var1=0; /* set var1 to 0 */
+ var1units=1; /* .. */
+ break; /* from inner */
+ } /* var1 == var2 */
+ /* *pv1>v2. Prepare for real subtraction; the lengths are equal */
+ /* Estimate the multiplier (there's always a msu1-1)... */
+ /* Bring in two units of var2 to provide a good estimate. */
+ mult=(Int)(((eInt)*msu1*(DECDPUNMAX+1)+*(msu1-1))/msu2pair);
+ } /* lengths the same */
+ else { /* var1units > var2ulen, so subtraction is safe */
+ /* The var2 msu is one unit towards the lsu of the var1 msu, */
+ /* so only one unit for var2 can be used. */
+ mult=(Int)(((eInt)*msu1*(DECDPUNMAX+1)+*(msu1-1))/msu2plus);
+ }
+ if (mult==0) mult=1; /* must always be at least 1 */
+ /* subtraction needed; var1 is > var2 */
+ thisunit=(Unit)(thisunit+mult); /* accumulate */
+ /* subtract var1-var2, into var1; only the overlap needs */
+ /* processing, as this is an in-place calculation */
+ shift=var2ulen-var2units;
+ #if DECTRACE
+ decDumpAr('1', &var1[shift], var1units-shift);
+ decDumpAr('2', var2, var2units);
+ printf("m=%ld\n", -mult);
+ #endif
+ decUnitAddSub(&var1[shift], var1units-shift,
+ var2, var2units, 0,
+ &var1[shift], -mult);
+ #if DECTRACE
+ decDumpAr('#', &var1[shift], var1units-shift);
+ #endif
+ /* var1 now probably has leading zeros; these are removed at the */
+ /* top of the inner loop. */
+ } /* inner loop */
+
+ /* The next unit has been calculated in full; unless it's a */
+ /* leading zero, add to acc */
+ if (accunits!=0 || thisunit!=0) { /* is first or non-zero */
+ *accnext=thisunit; /* store in accumulator */
+ /* account exactly for the new digits */
+ if (accunits==0) {
+ accdigits++; /* at least one */
+ for (pow=&powers[1]; thisunit>=*pow; pow++) accdigits++;
+ }
+ else accdigits+=DECDPUN;
+ accunits++; /* update count */
+ accnext--; /* ready for next */
+ if (accdigits>reqdigits) break; /* have enough digits */
+ }
+
+ /* if the residue is zero, the operation is done (unless divide */
+ /* or divideInteger and still not enough digits yet) */
+ if (*var1==0 && var1units==1) { /* residue is 0 */
+ if (op&(REMAINDER|REMNEAR)) break;
+ if ((op&DIVIDE) && (exponent<=maxexponent)) break;
+ /* [drop through if divideInteger] */
+ }
+ /* also done enough if calculating remainder or integer */
+ /* divide and just did the last ('units') unit */
+ if (exponent==0 && !(op&DIVIDE)) break;
+
+ /* to get here, var1 is less than var2, so divide var2 by the per- */
+ /* Unit power of ten and go for the next digit */
+ var2ulen--; /* shift down */
+ exponent-=DECDPUN; /* update the exponent */
+ } /* outer loop */
+
+ /* ---- division is complete --------------------------------------- */
+ /* here: acc has at least reqdigits+1 of good results (or fewer */
+ /* if early stop), starting at accnext+1 (its lsu) */
+ /* var1 has any residue at the stopping point */
+ /* accunits is the number of digits collected in acc */
+ if (accunits==0) { /* acc is 0 */
+ accunits=1; /* show have a unit .. */
+ accdigits=1; /* .. */
+ *accnext=0; /* .. whose value is 0 */
+ }
+ else accnext++; /* back to last placed */
+ /* accnext now -> lowest unit of result */
+
+ residue=0; /* assume no residue */
+ if (op&DIVIDE) {
+ /* record the presence of any residue, for rounding */
+ if (*var1!=0 || var1units>1) residue=1;
+ else { /* no residue */
+ /* Had an exact division; clean up spurious trailing 0s. */
+ /* There will be at most DECDPUN-1, from the final multiply, */
+ /* and then only if the result is non-0 (and even) and the */
+ /* exponent is 'loose'. */
+ #if DECDPUN>1
+ Unit lsu=*accnext;
+ if (!(lsu&0x01) && (lsu!=0)) {
+ /* count the trailing zeros */
+ Int drop=0;
+ for (;; drop++) { /* [will terminate because lsu!=0] */
+ if (exponent>=maxexponent) break; /* don't chop real 0s */
+ #if DECDPUN<=4
+ if ((lsu-QUOT10(lsu, drop+1)
+ *powers[drop+1])!=0) break; /* found non-0 digit */
+ #else
+ if (lsu%powers[drop+1]!=0) break; /* found non-0 digit */
+ #endif
+ exponent++;
+ }
+ if (drop>0) {
+ accunits=decShiftToLeast(accnext, accunits, drop);
+ accdigits=decGetDigits(accnext, accunits);
+ accunits=D2U(accdigits);
+ /* [exponent was adjusted in the loop] */
+ }
+ } /* neither odd nor 0 */
+ #endif
+ } /* exact divide */
+ } /* divide */
+ else /* op!=DIVIDE */ {
+ /* check for coefficient overflow */
+ if (accdigits+exponent>reqdigits) {
+ *status|=DEC_Division_impossible;
+ break;
+ }
+ if (op & (REMAINDER|REMNEAR)) {
+ /* [Here, the exponent will be 0, because var1 was adjusted */
+ /* appropriately.] */
+ Int postshift; /* work */
+ Flag wasodd=0; /* integer was odd */
+ Unit *quotlsu; /* for save */
+ Int quotdigits; /* .. */
+
+ bits=lhs->bits; /* remainder sign is always as lhs */
+
+ /* Fastpath when residue is truly 0 is worthwhile [and */
+ /* simplifies the code below] */
+ if (*var1==0 && var1units==1) { /* residue is 0 */
+ Int exp=lhs->exponent; /* save min(exponents) */
+ if (rhs->exponent<exp) exp=rhs->exponent;
+ decNumberZero(res); /* 0 coefficient */
+ #if DECSUBSET
+ if (set->extended)
+ #endif
+ res->exponent=exp; /* .. with proper exponent */
+ res->bits=(uByte)(bits&DECNEG); /* [cleaned] */
+ decFinish(res, set, &residue, status); /* might clamp */
+ break;
+ }
+ /* note if the quotient was odd */
+ if (*accnext & 0x01) wasodd=1; /* acc is odd */
+ quotlsu=accnext; /* save in case need to reinspect */
+ quotdigits=accdigits; /* .. */
+
+ /* treat the residue, in var1, as the value to return, via acc */
+ /* calculate the unused zero digits. This is the smaller of: */
+ /* var1 initial padding (saved above) */
+ /* var2 residual padding, which happens to be given by: */
+ postshift=var1initpad+exponent-lhs->exponent+rhs->exponent;
+ /* [the 'exponent' term accounts for the shifts during divide] */
+ if (var1initpad<postshift) postshift=var1initpad;
+
+ /* shift var1 the requested amount, and adjust its digits */
+ var1units=decShiftToLeast(var1, var1units, postshift);
+ accnext=var1;
+ accdigits=decGetDigits(var1, var1units);
+ accunits=D2U(accdigits);
+
+ exponent=lhs->exponent; /* exponent is smaller of lhs & rhs */
+ if (rhs->exponent<exponent) exponent=rhs->exponent;
+
+ /* Now correct the result if doing remainderNear; if it */
+ /* (looking just at coefficients) is > rhs/2, or == rhs/2 and */
+ /* the integer was odd then the result should be rem-rhs. */
+ if (op&REMNEAR) {
+ Int compare, tarunits; /* work */
+ Unit *up; /* .. */
+ /* calculate remainder*2 into the var1 buffer (which has */
+ /* 'headroom' of an extra unit and hence enough space) */
+ /* [a dedicated 'double' loop would be faster, here] */
+ tarunits=decUnitAddSub(accnext, accunits, accnext, accunits,
+ 0, accnext, 1);
+ /* decDumpAr('r', accnext, tarunits); */
+
+ /* Here, accnext (var1) holds tarunits Units with twice the */
+ /* remainder's coefficient, which must now be compared to the */
+ /* RHS. The remainder's exponent may be smaller than the RHS's. */
+ compare=decUnitCompare(accnext, tarunits, rhs->lsu, D2U(rhs->digits),
+ rhs->exponent-exponent);
+ if (compare==BADINT) { /* deep trouble */
+ *status|=DEC_Insufficient_storage;
+ break;}
+
+ /* now restore the remainder by dividing by two; the lsu */
+ /* is known to be even. */
+ for (up=accnext; up<accnext+tarunits; up++) {
+ Int half; /* half to add to lower unit */
+ half=*up & 0x01;
+ *up/=2; /* [shift] */
+ if (!half) continue;
+ *(up-1)+=(DECDPUNMAX+1)/2;
+ }
+ /* [accunits still describes the original remainder length] */
+
+ if (compare>0 || (compare==0 && wasodd)) { /* adjustment needed */
+ Int exp, expunits, exprem; /* work */
+ /* This is effectively causing round-up of the quotient, */
+ /* so if it was the rare case where it was full and all */
+ /* nines, it would overflow and hence division-impossible */
+ /* should be raised */
+ Flag allnines=0; /* 1 if quotient all nines */
+ if (quotdigits==reqdigits) { /* could be borderline */
+ for (up=quotlsu; ; up++) {
+ if (quotdigits>DECDPUN) {
+ if (*up!=DECDPUNMAX) break;/* non-nines */
+ }
+ else { /* this is the last Unit */
+ if (*up==powers[quotdigits]-1) allnines=1;
+ break;
+ }
+ quotdigits-=DECDPUN; /* checked those digits */
+ } /* up */
+ } /* borderline check */
+ if (allnines) {
+ *status|=DEC_Division_impossible;
+ break;}
+
+ /* rem-rhs is needed; the sign will invert. Again, var1 */
+ /* can safely be used for the working Units array. */
+ exp=rhs->exponent-exponent; /* RHS padding needed */
+ /* Calculate units and remainder from exponent. */
+ expunits=exp/DECDPUN;
+ exprem=exp%DECDPUN;
+ /* subtract [A+B*(-m)]; the result will always be negative */
+ accunits=-decUnitAddSub(accnext, accunits,
+ rhs->lsu, D2U(rhs->digits),
+ expunits, accnext, -(Int)powers[exprem]);
+ accdigits=decGetDigits(accnext, accunits); /* count digits exactly */
+ accunits=D2U(accdigits); /* and recalculate the units for copy */
+ /* [exponent is as for original remainder] */
+ bits^=DECNEG; /* flip the sign */
+ }
+ } /* REMNEAR */
+ } /* REMAINDER or REMNEAR */
+ } /* not DIVIDE */
+
+ /* Set exponent and bits */
+ res->exponent=exponent;
+ res->bits=(uByte)(bits&DECNEG); /* [cleaned] */
+
+ /* Now the coefficient. */
+ decSetCoeff(res, set, accnext, accdigits, &residue, status);
+
+ decFinish(res, set, &residue, status); /* final cleanup */
+
+ #if DECSUBSET
+ /* If a divide then strip trailing zeros if subset [after round] */
+ if (!set->extended && (op==DIVIDE)) decTrim(res, set, 0, &dropped);
+ #endif
+ } while(0); /* end protected */
+
+ if (varalloc!=NULL) free(varalloc); /* drop any storage used */
+ if (allocacc!=NULL) free(allocacc); /* .. */
+ #if DECSUBSET
+ if (allocrhs!=NULL) free(allocrhs); /* .. */
+ if (alloclhs!=NULL) free(alloclhs); /* .. */
+ #endif
+ return res;
+ } /* decDivideOp */
+
+/* ------------------------------------------------------------------ */
+/* decMultiplyOp -- multiplication operation */
+/* */
+/* This routine performs the multiplication C=A x B. */
+/* */
+/* res is C, the result. C may be A and/or B (e.g., X=X*X) */
+/* lhs is A */
+/* rhs is B */
+/* set is the context */
+/* status is the usual accumulator */
+/* */
+/* C must have space for set->digits digits. */
+/* */
+/* ------------------------------------------------------------------ */
+/* 'Classic' multiplication is used rather than Karatsuba, as the */
+/* latter would give only a minor improvement for the short numbers */
+/* expected to be handled most (and uses much more memory). */
+/* */
+/* There are two major paths here: the general-purpose ('old code') */
+/* path which handles all DECDPUN values, and a fastpath version */
+/* which is used if 64-bit ints are available, DECDPUN<=4, and more */
+/* than two calls to decUnitAddSub would be made. */
+/* */
+/* The fastpath version lumps units together into 8-digit or 9-digit */
+/* chunks, and also uses a lazy carry strategy to minimise expensive */
+/* 64-bit divisions. The chunks are then broken apart again into */
+/* units for continuing processing. Despite this overhead, the */
+/* fastpath can speed up some 16-digit operations by 10x (and much */
+/* more for higher-precision calculations). */
+/* */
+/* A buffer always has to be used for the accumulator; in the */
+/* fastpath, buffers are also always needed for the chunked copies of */
+/* of the operand coefficients. */
+/* Static buffers are larger than needed just for multiply, to allow */
+/* for calls from other operations (notably exp). */
+/* ------------------------------------------------------------------ */
+#define FASTMUL (DECUSE64 && DECDPUN<5)
+static decNumber * decMultiplyOp(decNumber *res, const decNumber *lhs,
+ const decNumber *rhs, decContext *set,
+ uInt *status) {
+ Int accunits; /* Units of accumulator in use */
+ Int exponent; /* work */
+ Int residue=0; /* rounding residue */
+ uByte bits; /* result sign */
+ Unit *acc; /* -> accumulator Unit array */
+ Int needbytes; /* size calculator */
+ void *allocacc=NULL; /* -> allocated accumulator, iff allocated */
+ Unit accbuff[SD2U(DECBUFFER*4+1)]; /* buffer (+1 for DECBUFFER==0, */
+ /* *4 for calls from other operations) */
+ const Unit *mer, *mermsup; /* work */
+ Int madlength; /* Units in multiplicand */
+ Int shift; /* Units to shift multiplicand by */
+
+ #if FASTMUL
+ /* if DECDPUN is 1 or 3 work in base 10**9, otherwise */
+ /* (DECDPUN is 2 or 4) then work in base 10**8 */
+ #if DECDPUN & 1 /* odd */
+ #define FASTBASE 1000000000 /* base */
+ #define FASTDIGS 9 /* digits in base */
+ #define FASTLAZY 18 /* carry resolution point [1->18] */
+ #else
+ #define FASTBASE 100000000
+ #define FASTDIGS 8
+ #define FASTLAZY 1844 /* carry resolution point [1->1844] */
+ #endif
+ /* three buffers are used, two for chunked copies of the operands */
+ /* (base 10**8 or base 10**9) and one base 2**64 accumulator with */
+ /* lazy carry evaluation */
+ uInt zlhibuff[(DECBUFFER*2+1)/8+1]; /* buffer (+1 for DECBUFFER==0) */
+ uInt *zlhi=zlhibuff; /* -> lhs array */
+ uInt *alloclhi=NULL; /* -> allocated buffer, iff allocated */
+ uInt zrhibuff[(DECBUFFER*2+1)/8+1]; /* buffer (+1 for DECBUFFER==0) */
+ uInt *zrhi=zrhibuff; /* -> rhs array */
+ uInt *allocrhi=NULL; /* -> allocated buffer, iff allocated */
+ uLong zaccbuff[(DECBUFFER*2+1)/4+2]; /* buffer (+1 for DECBUFFER==0) */
+ /* [allocacc is shared for both paths, as only one will run] */
+ uLong *zacc=zaccbuff; /* -> accumulator array for exact result */
+ #if DECDPUN==1
+ Int zoff; /* accumulator offset */
+ #endif
+ uInt *lip, *rip; /* item pointers */
+ uInt *lmsi, *rmsi; /* most significant items */
+ Int ilhs, irhs, iacc; /* item counts in the arrays */
+ Int lazy; /* lazy carry counter */
+ uLong lcarry; /* uLong carry */
+ uInt carry; /* carry (NB not uLong) */
+ Int count; /* work */
+ const Unit *cup; /* .. */
+ Unit *up; /* .. */
+ uLong *lp; /* .. */
+ Int p; /* .. */
+ #endif
+
+ #if DECSUBSET
+ decNumber *alloclhs=NULL; /* -> allocated buffer, iff allocated */
+ decNumber *allocrhs=NULL; /* -> allocated buffer, iff allocated */
+ #endif
+
+ #if DECCHECK
+ if (decCheckOperands(res, lhs, rhs, set)) return res;
+ #endif
+
+ /* precalculate result sign */
+ bits=(uByte)((lhs->bits^rhs->bits)&DECNEG);
+
+ /* handle infinities and NaNs */
+ if (SPECIALARGS) { /* a special bit set */
+ if (SPECIALARGS & (DECSNAN | DECNAN)) { /* one or two NaNs */
+ decNaNs(res, lhs, rhs, set, status);
+ return res;}
+ /* one or two infinities; Infinity * 0 is invalid */
+ if (((lhs->bits & DECINF)==0 && ISZERO(lhs))
+ ||((rhs->bits & DECINF)==0 && ISZERO(rhs))) {
+ *status|=DEC_Invalid_operation;
+ return res;}
+ decNumberZero(res);
+ res->bits=bits|DECINF; /* infinity */
+ return res;}
+
+ /* For best speed, as in DMSRCN [the original Rexx numerics */
+ /* module], use the shorter number as the multiplier (rhs) and */
+ /* the longer as the multiplicand (lhs) to minimise the number of */
+ /* adds (partial products) */
+ if (lhs->digits<rhs->digits) { /* swap... */
+ const decNumber *hold=lhs;
+ lhs=rhs;
+ rhs=hold;
+ }
+
+ do { /* protect allocated storage */
+ #if DECSUBSET
+ if (!set->extended) {
+ /* reduce operands and set lostDigits status, as needed */
+ if (lhs->digits>set->digits) {
+ alloclhs=decRoundOperand(lhs, set, status);
+ if (alloclhs==NULL) break;
+ lhs=alloclhs;
+ }
+ if (rhs->digits>set->digits) {
+ allocrhs=decRoundOperand(rhs, set, status);
+ if (allocrhs==NULL) break;
+ rhs=allocrhs;
+ }
+ }
+ #endif
+ /* [following code does not require input rounding] */
+
+ #if FASTMUL /* fastpath can be used */
+ /* use the fast path if there are enough digits in the shorter */
+ /* operand to make the setup and takedown worthwhile */
+ #define NEEDTWO (DECDPUN*2) /* within two decUnitAddSub calls */
+ if (rhs->digits>NEEDTWO) { /* use fastpath... */
+ /* calculate the number of elements in each array */
+ ilhs=(lhs->digits+FASTDIGS-1)/FASTDIGS; /* [ceiling] */
+ irhs=(rhs->digits+FASTDIGS-1)/FASTDIGS; /* .. */
+ iacc=ilhs+irhs;
+
+ /* allocate buffers if required, as usual */
+ needbytes=ilhs*sizeof(uInt);
+ if (needbytes>(Int)sizeof(zlhibuff)) {
+ alloclhi=(uInt *)malloc(needbytes);
+ zlhi=alloclhi;}
+ needbytes=irhs*sizeof(uInt);
+ if (needbytes>(Int)sizeof(zrhibuff)) {
+ allocrhi=(uInt *)malloc(needbytes);
+ zrhi=allocrhi;}
+
+ /* Allocating the accumulator space needs a special case when */
+ /* DECDPUN=1 because when converting the accumulator to Units */
+ /* after the multiplication each 8-byte item becomes 9 1-byte */
+ /* units. Therefore iacc extra bytes are needed at the front */
+ /* (rounded up to a multiple of 8 bytes), and the uLong */
+ /* accumulator starts offset the appropriate number of units */
+ /* to the right to avoid overwrite during the unchunking. */
+ needbytes=iacc*sizeof(uLong);
+ #if DECDPUN==1
+ zoff=(iacc+7)/8; /* items to offset by */
+ needbytes+=zoff*8;
+ #endif
+ if (needbytes>(Int)sizeof(zaccbuff)) {
+ allocacc=(uLong *)malloc(needbytes);
+ zacc=(uLong *)allocacc;}
+ if (zlhi==NULL||zrhi==NULL||zacc==NULL) {
+ *status|=DEC_Insufficient_storage;
+ break;}
+
+ acc=(Unit *)zacc; /* -> target Unit array */
+ #if DECDPUN==1
+ zacc+=zoff; /* start uLong accumulator to right */
+ #endif
+
+ /* assemble the chunked copies of the left and right sides */
+ for (count=lhs->digits, cup=lhs->lsu, lip=zlhi; count>0; lip++)
+ for (p=0, *lip=0; p<FASTDIGS && count>0;
+ p+=DECDPUN, cup++, count-=DECDPUN)
+ *lip+=*cup*powers[p];
+ lmsi=lip-1; /* save -> msi */
+ for (count=rhs->digits, cup=rhs->lsu, rip=zrhi; count>0; rip++)
+ for (p=0, *rip=0; p<FASTDIGS && count>0;
+ p+=DECDPUN, cup++, count-=DECDPUN)
+ *rip+=*cup*powers[p];
+ rmsi=rip-1; /* save -> msi */
+
+ /* zero the accumulator */
+ for (lp=zacc; lp<zacc+iacc; lp++) *lp=0;
+
+ /* Start the multiplication */
+ /* Resolving carries can dominate the cost of accumulating the */
+ /* partial products, so this is only done when necessary. */
+ /* Each uLong item in the accumulator can hold values up to */
+ /* 2**64-1, and each partial product can be as large as */
+ /* (10**FASTDIGS-1)**2. When FASTDIGS=9, this can be added to */
+ /* itself 18.4 times in a uLong without overflowing, so during */
+ /* the main calculation resolution is carried out every 18th */
+ /* add -- every 162 digits. Similarly, when FASTDIGS=8, the */
+ /* partial products can be added to themselves 1844.6 times in */
+ /* a uLong without overflowing, so intermediate carry */
+ /* resolution occurs only every 14752 digits. Hence for common */
+ /* short numbers usually only the one final carry resolution */
+ /* occurs. */
+ /* (The count is set via FASTLAZY to simplify experiments to */
+ /* measure the value of this approach: a 35% improvement on a */
+ /* [34x34] multiply.) */
+ lazy=FASTLAZY; /* carry delay count */
+ for (rip=zrhi; rip<=rmsi; rip++) { /* over each item in rhs */
+ lp=zacc+(rip-zrhi); /* where to add the lhs */
+ for (lip=zlhi; lip<=lmsi; lip++, lp++) { /* over each item in lhs */
+ *lp+=(uLong)(*lip)*(*rip); /* [this should in-line] */
+ } /* lip loop */
+ lazy--;
+ if (lazy>0 && rip!=rmsi) continue;
+ lazy=FASTLAZY; /* reset delay count */
+ /* spin up the accumulator resolving overflows */
+ for (lp=zacc; lp<zacc+iacc; lp++) {
+ if (*lp<FASTBASE) continue; /* it fits */
+ lcarry=*lp/FASTBASE; /* top part [slow divide] */
+ /* lcarry can exceed 2**32-1, so check again; this check */
+ /* and occasional extra divide (slow) is well worth it, as */
+ /* it allows FASTLAZY to be increased to 18 rather than 4 */
+ /* in the FASTDIGS=9 case */
+ if (lcarry<FASTBASE) carry=(uInt)lcarry; /* [usual] */
+ else { /* two-place carry [fairly rare] */
+ uInt carry2=(uInt)(lcarry/FASTBASE); /* top top part */
+ *(lp+2)+=carry2; /* add to item+2 */
+ *lp-=((uLong)FASTBASE*FASTBASE*carry2); /* [slow] */
+ carry=(uInt)(lcarry-((uLong)FASTBASE*carry2)); /* [inline] */
+ }
+ *(lp+1)+=carry; /* add to item above [inline] */
+ *lp-=((uLong)FASTBASE*carry); /* [inline] */
+ } /* carry resolution */
+ } /* rip loop */
+
+ /* The multiplication is complete; time to convert back into */
+ /* units. This can be done in-place in the accumulator and in */
+ /* 32-bit operations, because carries were resolved after the */
+ /* final add. This needs N-1 divides and multiplies for */
+ /* each item in the accumulator (which will become up to N */
+ /* units, where 2<=N<=9). */
+ for (lp=zacc, up=acc; lp<zacc+iacc; lp++) {
+ uInt item=(uInt)*lp; /* decapitate to uInt */
+ for (p=0; p<FASTDIGS-DECDPUN; p+=DECDPUN, up++) {
+ uInt part=item/(DECDPUNMAX+1);
+ *up=(Unit)(item-(part*(DECDPUNMAX+1)));
+ item=part;
+ } /* p */
+ *up=(Unit)item; up++; /* [final needs no division] */
+ } /* lp */
+ accunits=up-acc; /* count of units */
+ }
+ else { /* here to use units directly, without chunking ['old code'] */
+ #endif
+
+ /* if accumulator will be too long for local storage, then allocate */
+ acc=accbuff; /* -> assume buffer for accumulator */
+ needbytes=(D2U(lhs->digits)+D2U(rhs->digits))*sizeof(Unit);
+ if (needbytes>(Int)sizeof(accbuff)) {
+ allocacc=(Unit *)malloc(needbytes);
+ if (allocacc==NULL) {*status|=DEC_Insufficient_storage; break;}
+ acc=(Unit *)allocacc; /* use the allocated space */
+ }
+
+ /* Now the main long multiplication loop */
+ /* Unlike the equivalent in the IBM Java implementation, there */
+ /* is no advantage in calculating from msu to lsu. So, do it */
+ /* by the book, as it were. */
+ /* Each iteration calculates ACC=ACC+MULTAND*MULT */
+ accunits=1; /* accumulator starts at '0' */
+ *acc=0; /* .. (lsu=0) */
+ shift=0; /* no multiplicand shift at first */
+ madlength=D2U(lhs->digits); /* this won't change */
+ mermsup=rhs->lsu+D2U(rhs->digits); /* -> msu+1 of multiplier */
+
+ for (mer=rhs->lsu; mer<mermsup; mer++) {
+ /* Here, *mer is the next Unit in the multiplier to use */
+ /* If non-zero [optimization] add it... */
+ if (*mer!=0) accunits=decUnitAddSub(&acc[shift], accunits-shift,
+ lhs->lsu, madlength, 0,
+ &acc[shift], *mer)
+ + shift;
+ else { /* extend acc with a 0; it will be used shortly */
+ *(acc+accunits)=0; /* [this avoids length of <=0 later] */
+ accunits++;
+ }
+ /* multiply multiplicand by 10**DECDPUN for next Unit to left */
+ shift++; /* add this for 'logical length' */
+ } /* n */
+ #if FASTMUL
+ } /* unchunked units */
+ #endif
+ /* common end-path */
+ #if DECTRACE
+ decDumpAr('*', acc, accunits); /* Show exact result */
+ #endif
+
+ /* acc now contains the exact result of the multiplication, */
+ /* possibly with a leading zero unit; build the decNumber from */
+ /* it, noting if any residue */
+ res->bits=bits; /* set sign */
+ res->digits=decGetDigits(acc, accunits); /* count digits exactly */
+
+ /* There can be a 31-bit wrap in calculating the exponent. */
+ /* This can only happen if both input exponents are negative and */
+ /* both their magnitudes are large. If there was a wrap, set a */
+ /* safe very negative exponent, from which decFinalize() will */
+ /* raise a hard underflow shortly. */
+ exponent=lhs->exponent+rhs->exponent; /* calculate exponent */
+ if (lhs->exponent<0 && rhs->exponent<0 && exponent>0)
+ exponent=-2*DECNUMMAXE; /* force underflow */
+ res->exponent=exponent; /* OK to overwrite now */
+
+
+ /* Set the coefficient. If any rounding, residue records */
+ decSetCoeff(res, set, acc, res->digits, &residue, status);
+ decFinish(res, set, &residue, status); /* final cleanup */
+ } while(0); /* end protected */
+
+ if (allocacc!=NULL) free(allocacc); /* drop any storage used */
+ #if DECSUBSET
+ if (allocrhs!=NULL) free(allocrhs); /* .. */
+ if (alloclhs!=NULL) free(alloclhs); /* .. */
+ #endif
+ #if FASTMUL
+ if (allocrhi!=NULL) free(allocrhi); /* .. */
+ if (alloclhi!=NULL) free(alloclhi); /* .. */
+ #endif
+ return res;
+ } /* decMultiplyOp */
+
+/* ------------------------------------------------------------------ */
+/* decExpOp -- effect exponentiation */
+/* */
+/* This computes C = exp(A) */
+/* */
+/* res is C, the result. C may be A */
+/* rhs is A */
+/* set is the context; note that rounding mode has no effect */
+/* */
+/* C must have space for set->digits digits. status is updated but */
+/* not set. */
+/* */
+/* Restrictions: */
+/* */
+/* digits, emax, and -emin in the context must be less than */
+/* 2*DEC_MAX_MATH (1999998), and the rhs must be within these */
+/* bounds or a zero. This is an internal routine, so these */
+/* restrictions are contractual and not enforced. */
+/* */
+/* A finite result is rounded using DEC_ROUND_HALF_EVEN; it will */
+/* almost always be correctly rounded, but may be up to 1 ulp in */
+/* error in rare cases. */
+/* */
+/* Finite results will always be full precision and Inexact, except */
+/* when A is a zero or -Infinity (giving 1 or 0 respectively). */
+/* ------------------------------------------------------------------ */
+/* This approach used here is similar to the algorithm described in */
+/* */
+/* Variable Precision Exponential Function, T. E. Hull and */
+/* A. Abrham, ACM Transactions on Mathematical Software, Vol 12 #2, */
+/* pp79-91, ACM, June 1986. */
+/* */
+/* with the main difference being that the iterations in the series */
+/* evaluation are terminated dynamically (which does not require the */
+/* extra variable-precision variables which are expensive in this */
+/* context). */
+/* */
+/* The error analysis in Hull & Abrham's paper applies except for the */
+/* round-off error accumulation during the series evaluation. This */
+/* code does not precalculate the number of iterations and so cannot */
+/* use Horner's scheme. Instead, the accumulation is done at double- */
+/* precision, which ensures that the additions of the terms are exact */
+/* and do not accumulate round-off (and any round-off errors in the */
+/* terms themselves move 'to the right' faster than they can */
+/* accumulate). This code also extends the calculation by allowing, */
+/* in the spirit of other decNumber operators, the input to be more */
+/* precise than the result (the precision used is based on the more */
+/* precise of the input or requested result). */
+/* */
+/* Implementation notes: */
+/* */
+/* 1. This is separated out as decExpOp so it can be called from */
+/* other Mathematical functions (notably Ln) with a wider range */
+/* than normal. In particular, it can handle the slightly wider */
+/* (double) range needed by Ln (which has to be able to calculate */
+/* exp(-x) where x can be the tiniest number (Ntiny). */
+/* */
+/* 2. Normalizing x to be <=0.1 (instead of <=1) reduces loop */
+/* iterations by appoximately a third with additional (although */
+/* diminishing) returns as the range is reduced to even smaller */
+/* fractions. However, h (the power of 10 used to correct the */
+/* result at the end, see below) must be kept <=8 as otherwise */
+/* the final result cannot be computed. Hence the leverage is a */
+/* sliding value (8-h), where potentially the range is reduced */
+/* more for smaller values. */
+/* */
+/* The leverage that can be applied in this way is severely */
+/* limited by the cost of the raise-to-the power at the end, */
+/* which dominates when the number of iterations is small (less */
+/* than ten) or when rhs is short. As an example, the adjustment */
+/* x**10,000,000 needs 31 multiplications, all but one full-width. */
+/* */
+/* 3. The restrictions (especially precision) could be raised with */
+/* care, but the full decNumber range seems very hard within the */
+/* 32-bit limits. */
+/* */
+/* 4. The working precisions for the static buffers are twice the */
+/* obvious size to allow for calls from decNumberPower. */
+/* ------------------------------------------------------------------ */
+decNumber * decExpOp(decNumber *res, const decNumber *rhs,
+ decContext *set, uInt *status) {
+ uInt ignore=0; /* working status */
+ Int h; /* adjusted exponent for 0.xxxx */
+ Int p; /* working precision */
+ Int residue; /* rounding residue */
+ uInt needbytes; /* for space calculations */
+ const decNumber *x=rhs; /* (may point to safe copy later) */
+ decContext aset, tset, dset; /* working contexts */
+ Int comp; /* work */
+
+ /* the argument is often copied to normalize it, so (unusually) it */
+ /* is treated like other buffers, using DECBUFFER, +1 in case */
+ /* DECBUFFER is 0 */
+ decNumber bufr[D2N(DECBUFFER*2+1)];
+ decNumber *allocrhs=NULL; /* non-NULL if rhs buffer allocated */
+
+ /* the working precision will be no more than set->digits+8+1 */
+ /* so for on-stack buffers DECBUFFER+9 is used, +1 in case DECBUFFER */
+ /* is 0 (and twice that for the accumulator) */
+
+ /* buffer for t, term (working precision plus) */
+ decNumber buft[D2N(DECBUFFER*2+9+1)];
+ decNumber *allocbuft=NULL; /* -> allocated buft, iff allocated */
+ decNumber *t=buft; /* term */
+ /* buffer for a, accumulator (working precision * 2), at least 9 */
+ decNumber bufa[D2N(DECBUFFER*4+18+1)];
+ decNumber *allocbufa=NULL; /* -> allocated bufa, iff allocated */
+ decNumber *a=bufa; /* accumulator */
+ /* decNumber for the divisor term; this needs at most 9 digits */
+ /* and so can be fixed size [16 so can use standard context] */
+ decNumber bufd[D2N(16)];
+ decNumber *d=bufd; /* divisor */
+ decNumber numone; /* constant 1 */
+
+ #if DECCHECK
+ Int iterations=0; /* for later sanity check */
+ if (decCheckOperands(res, DECUNUSED, rhs, set)) return res;
+ #endif
+
+ do { /* protect allocated storage */
+ if (SPECIALARG) { /* handle infinities and NaNs */
+ if (decNumberIsInfinite(rhs)) { /* an infinity */
+ if (decNumberIsNegative(rhs)) /* -Infinity -> +0 */
+ decNumberZero(res);
+ else decNumberCopy(res, rhs); /* +Infinity -> self */
+ }
+ else decNaNs(res, rhs, NULL, set, status); /* a NaN */
+ break;}
+
+ if (ISZERO(rhs)) { /* zeros -> exact 1 */
+ decNumberZero(res); /* make clean 1 */
+ *res->lsu=1; /* .. */
+ break;} /* [no status to set] */
+
+ /* e**x when 0 < x < 0.66 is < 1+3x/2, hence can fast-path */
+ /* positive and negative tiny cases which will result in inexact */
+ /* 1. This also allows the later add-accumulate to always be */
+ /* exact (because its length will never be more than twice the */
+ /* working precision). */
+ /* The comparator (tiny) needs just one digit, so use the */
+ /* decNumber d for it (reused as the divisor, etc., below); its */
+ /* exponent is such that if x is positive it will have */
+ /* set->digits-1 zeros between the decimal point and the digit, */
+ /* which is 4, and if x is negative one more zero there as the */
+ /* more precise result will be of the form 0.9999999 rather than */
+ /* 1.0000001. Hence, tiny will be 0.0000004 if digits=7 and x>0 */
+ /* or 0.00000004 if digits=7 and x<0. If RHS not larger than */
+ /* this then the result will be 1.000000 */
+ decNumberZero(d); /* clean */
+ *d->lsu=4; /* set 4 .. */
+ d->exponent=-set->digits; /* * 10**(-d) */
+ if (decNumberIsNegative(rhs)) d->exponent--; /* negative case */
+ comp=decCompare(d, rhs, 1); /* signless compare */
+ if (comp==BADINT) {
+ *status|=DEC_Insufficient_storage;
+ break;}
+ if (comp>=0) { /* rhs < d */
+ Int shift=set->digits-1;
+ decNumberZero(res); /* set 1 */
+ *res->lsu=1; /* .. */
+ res->digits=decShiftToMost(res->lsu, 1, shift);
+ res->exponent=-shift; /* make 1.0000... */
+ *status|=DEC_Inexact | DEC_Rounded; /* .. inexactly */
+ break;} /* tiny */
+
+ /* set up the context to be used for calculating a, as this is */
+ /* used on both paths below */
+ decContextDefault(&aset, DEC_INIT_DECIMAL64);
+ /* accumulator bounds are as requested (could underflow) */
+ aset.emax=set->emax; /* usual bounds */
+ aset.emin=set->emin; /* .. */
+ aset.clamp=0; /* and no concrete format */
+
+ /* calculate the adjusted (Hull & Abrham) exponent (where the */
+ /* decimal point is just to the left of the coefficient msd) */
+ h=rhs->exponent+rhs->digits;
+ /* if h>8 then 10**h cannot be calculated safely; however, when */
+ /* h=8 then exp(|rhs|) will be at least exp(1E+7) which is at */
+ /* least 6.59E+4342944, so (due to the restriction on Emax/Emin) */
+ /* overflow (or underflow to 0) is guaranteed -- so this case can */
+ /* be handled by simply forcing the appropriate excess */
+ if (h>8) { /* overflow/underflow */
+ /* set up here so Power call below will over or underflow to */
+ /* zero; set accumulator to either 2 or 0.02 */
+ /* [stack buffer for a is always big enough for this] */
+ decNumberZero(a);
+ *a->lsu=2; /* not 1 but < exp(1) */
+ if (decNumberIsNegative(rhs)) a->exponent=-2; /* make 0.02 */
+ h=8; /* clamp so 10**h computable */
+ p=9; /* set a working precision */
+ }
+ else { /* h<=8 */
+ Int maxlever=(rhs->digits>8?1:0);
+ /* [could/should increase this for precisions >40 or so, too] */
+
+ /* if h is 8, cannot normalize to a lower upper limit because */
+ /* the final result will not be computable (see notes above), */
+ /* but leverage can be applied whenever h is less than 8. */
+ /* Apply as much as possible, up to a MAXLEVER digits, which */
+ /* sets the tradeoff against the cost of the later a**(10**h). */
+ /* As h is increased, the working precision below also */
+ /* increases to compensate for the "constant digits at the */
+ /* front" effect. */
+ Int lever=MINI(8-h, maxlever); /* leverage attainable */
+ Int use=-rhs->digits-lever; /* exponent to use for RHS */
+ h+=lever; /* apply leverage selected */
+ if (h<0) { /* clamp */
+ use+=h; /* [may end up subnormal] */
+ h=0;
+ }
+ /* Take a copy of RHS if it needs normalization (true whenever x>=1) */
+ if (rhs->exponent!=use) {
+ decNumber *newrhs=bufr; /* assume will fit on stack */
+ needbytes=sizeof(decNumber)+(D2U(rhs->digits)-1)*sizeof(Unit);
+ if (needbytes>sizeof(bufr)) { /* need malloc space */
+ allocrhs=(decNumber *)malloc(needbytes);
+ if (allocrhs==NULL) { /* hopeless -- abandon */
+ *status|=DEC_Insufficient_storage;
+ break;}
+ newrhs=allocrhs; /* use the allocated space */
+ }
+ decNumberCopy(newrhs, rhs); /* copy to safe space */
+ newrhs->exponent=use; /* normalize; now <1 */
+ x=newrhs; /* ready for use */
+ /* decNumberShow(x); */
+ }
+
+ /* Now use the usual power series to evaluate exp(x). The */
+ /* series starts as 1 + x + x^2/2 ... so prime ready for the */
+ /* third term by setting the term variable t=x, the accumulator */
+ /* a=1, and the divisor d=2. */
+
+ /* First determine the working precision. From Hull & Abrham */
+ /* this is set->digits+h+2. However, if x is 'over-precise' we */
+ /* need to allow for all its digits to potentially participate */
+ /* (consider an x where all the excess digits are 9s) so in */
+ /* this case use x->digits+h+2 */
+ p=MAXI(x->digits, set->digits)+h+2; /* [h<=8] */
+
+ /* a and t are variable precision, and depend on p, so space */
+ /* must be allocated for them if necessary */
+
+ /* the accumulator needs to be able to hold 2p digits so that */
+ /* the additions on the second and subsequent iterations are */
+ /* sufficiently exact. */
+ needbytes=sizeof(decNumber)+(D2U(p*2)-1)*sizeof(Unit);
+ if (needbytes>sizeof(bufa)) { /* need malloc space */
+ allocbufa=(decNumber *)malloc(needbytes);
+ if (allocbufa==NULL) { /* hopeless -- abandon */
+ *status|=DEC_Insufficient_storage;
+ break;}
+ a=allocbufa; /* use the allocated space */
+ }
+ /* the term needs to be able to hold p digits (which is */
+ /* guaranteed to be larger than x->digits, so the initial copy */
+ /* is safe); it may also be used for the raise-to-power */
+ /* calculation below, which needs an extra two digits */
+ needbytes=sizeof(decNumber)+(D2U(p+2)-1)*sizeof(Unit);
+ if (needbytes>sizeof(buft)) { /* need malloc space */
+ allocbuft=(decNumber *)malloc(needbytes);
+ if (allocbuft==NULL) { /* hopeless -- abandon */
+ *status|=DEC_Insufficient_storage;
+ break;}
+ t=allocbuft; /* use the allocated space */
+ }
+
+ decNumberCopy(t, x); /* term=x */
+ decNumberZero(a); *a->lsu=1; /* accumulator=1 */
+ decNumberZero(d); *d->lsu=2; /* divisor=2 */
+ decNumberZero(&numone); *numone.lsu=1; /* constant 1 for increment */
+
+ /* set up the contexts for calculating a, t, and d */
+ decContextDefault(&tset, DEC_INIT_DECIMAL64);
+ dset=tset;
+ /* accumulator bounds are set above, set precision now */
+ aset.digits=p*2; /* double */
+ /* term bounds avoid any underflow or overflow */
+ tset.digits=p;
+ tset.emin=DEC_MIN_EMIN; /* [emax is plenty] */
+ /* [dset.digits=16, etc., are sufficient] */
+
+ /* finally ready to roll */
+ for (;;) {
+ #if DECCHECK
+ iterations++;
+ #endif
+ /* only the status from the accumulation is interesting */
+ /* [but it should remain unchanged after first add] */
+ decAddOp(a, a, t, &aset, 0, status); /* a=a+t */
+ decMultiplyOp(t, t, x, &tset, &ignore); /* t=t*x */
+ decDivideOp(t, t, d, &tset, DIVIDE, &ignore); /* t=t/d */
+ /* the iteration ends when the term cannot affect the result, */
+ /* if rounded to p digits, which is when its value is smaller */
+ /* than the accumulator by p+1 digits. There must also be */
+ /* full precision in a. */
+ if (((a->digits+a->exponent)>=(t->digits+t->exponent+p+1))
+ && (a->digits>=p)) break;
+ decAddOp(d, d, &numone, &dset, 0, &ignore); /* d=d+1 */
+ } /* iterate */
+
+ #if DECCHECK
+ /* just a sanity check; comment out test to show always */
+ if (iterations>p+3)
+ printf("Exp iterations=%ld, status=%08lx, p=%ld, d=%ld\n",
+ iterations, *status, p, x->digits);
+ #endif
+ } /* h<=8 */
+
+ /* apply postconditioning: a=a**(10**h) -- this is calculated */
+ /* at a slightly higher precision than Hull & Abrham suggest */
+ if (h>0) {
+ Int seenbit=0; /* set once a 1-bit is seen */
+ Int i; /* counter */
+ Int n=powers[h]; /* always positive */
+ aset.digits=p+2; /* sufficient precision */
+ /* avoid the overhead and many extra digits of decNumberPower */
+ /* as all that is needed is the short 'multipliers' loop; here */
+ /* accumulate the answer into t */
+ decNumberZero(t); *t->lsu=1; /* acc=1 */
+ for (i=1;;i++){ /* for each bit [top bit ignored] */
+ /* abandon if have had overflow or terminal underflow */
+ if (*status & (DEC_Overflow|DEC_Underflow)) { /* interesting? */
+ if (*status&DEC_Overflow || ISZERO(t)) break;}
+ n=n<<1; /* move next bit to testable position */
+ if (n<0) { /* top bit is set */
+ seenbit=1; /* OK, have a significant bit */
+ decMultiplyOp(t, t, a, &aset, status); /* acc=acc*x */
+ }
+ if (i==31) break; /* that was the last bit */
+ if (!seenbit) continue; /* no need to square 1 */
+ decMultiplyOp(t, t, t, &aset, status); /* acc=acc*acc [square] */
+ } /*i*/ /* 32 bits */
+ /* decNumberShow(t); */
+ a=t; /* and carry on using t instead of a */
+ }
+
+ /* Copy and round the result to res */
+ residue=1; /* indicate dirt to right .. */
+ if (ISZERO(a)) residue=0; /* .. unless underflowed to 0 */
+ aset.digits=set->digits; /* [use default rounding] */
+ decCopyFit(res, a, &aset, &residue, status); /* copy & shorten */
+ decFinish(res, set, &residue, status); /* cleanup/set flags */
+ } while(0); /* end protected */
+
+ if (allocrhs !=NULL) free(allocrhs); /* drop any storage used */
+ if (allocbufa!=NULL) free(allocbufa); /* .. */
+ if (allocbuft!=NULL) free(allocbuft); /* .. */
+ /* [status is handled by caller] */
+ return res;
+ } /* decExpOp */
+
+/* ------------------------------------------------------------------ */
+/* Initial-estimate natural logarithm table */
+/* */
+/* LNnn -- 90-entry 16-bit table for values from .10 through .99. */
+/* The result is a 4-digit encode of the coefficient (c=the */
+/* top 14 bits encoding 0-9999) and a 2-digit encode of the */
+/* exponent (e=the bottom 2 bits encoding 0-3) */
+/* */
+/* The resulting value is given by: */
+/* */
+/* v = -c * 10**(-e-3) */
+/* */
+/* where e and c are extracted from entry k = LNnn[x-10] */
+/* where x is truncated (NB) into the range 10 through 99, */
+/* and then c = k>>2 and e = k&3. */
+/* ------------------------------------------------------------------ */
+const uShort LNnn[90]={9016, 8652, 8316, 8008, 7724, 7456, 7208,
+ 6972, 6748, 6540, 6340, 6148, 5968, 5792, 5628, 5464, 5312,
+ 5164, 5020, 4884, 4748, 4620, 4496, 4376, 4256, 4144, 4032,
+ 39233, 38181, 37157, 36157, 35181, 34229, 33297, 32389, 31501, 30629,
+ 29777, 28945, 28129, 27329, 26545, 25777, 25021, 24281, 23553, 22837,
+ 22137, 21445, 20769, 20101, 19445, 18801, 18165, 17541, 16925, 16321,
+ 15721, 15133, 14553, 13985, 13421, 12865, 12317, 11777, 11241, 10717,
+ 10197, 9685, 9177, 8677, 8185, 7697, 7213, 6737, 6269, 5801,
+ 5341, 4889, 4437, 39930, 35534, 31186, 26886, 22630, 18418, 14254,
+ 10130, 6046, 20055};
+
+/* ------------------------------------------------------------------ */
+/* decLnOp -- effect natural logarithm */
+/* */
+/* This computes C = ln(A) */
+/* */
+/* res is C, the result. C may be A */
+/* rhs is A */
+/* set is the context; note that rounding mode has no effect */
+/* */
+/* C must have space for set->digits digits. */
+/* */
+/* Notable cases: */
+/* A<0 -> Invalid */
+/* A=0 -> -Infinity (Exact) */
+/* A=+Infinity -> +Infinity (Exact) */
+/* A=1 exactly -> 0 (Exact) */
+/* */
+/* Restrictions (as for Exp): */
+/* */
+/* digits, emax, and -emin in the context must be less than */
+/* DEC_MAX_MATH+11 (1000010), and the rhs must be within these */
+/* bounds or a zero. This is an internal routine, so these */
+/* restrictions are contractual and not enforced. */
+/* */
+/* A finite result is rounded using DEC_ROUND_HALF_EVEN; it will */
+/* almost always be correctly rounded, but may be up to 1 ulp in */
+/* error in rare cases. */
+/* ------------------------------------------------------------------ */
+/* The result is calculated using Newton's method, with each */
+/* iteration calculating a' = a + x * exp(-a) - 1. See, for example, */
+/* Epperson 1989. */
+/* */
+/* The iteration ends when the adjustment x*exp(-a)-1 is tiny enough. */
+/* This has to be calculated at the sum of the precision of x and the */
+/* working precision. */
+/* */
+/* Implementation notes: */
+/* */
+/* 1. This is separated out as decLnOp so it can be called from */
+/* other Mathematical functions (e.g., Log 10) with a wider range */
+/* than normal. In particular, it can handle the slightly wider */
+/* (+9+2) range needed by a power function. */
+/* */
+/* 2. The speed of this function is about 10x slower than exp, as */
+/* it typically needs 4-6 iterations for short numbers, and the */
+/* extra precision needed adds a squaring effect, twice. */
+/* */
+/* 3. Fastpaths are included for ln(10) and ln(2), up to length 40, */
+/* as these are common requests. ln(10) is used by log10(x). */
+/* */
+/* 4. An iteration might be saved by widening the LNnn table, and */
+/* would certainly save at least one if it were made ten times */
+/* bigger, too (for truncated fractions 0.100 through 0.999). */
+/* However, for most practical evaluations, at least four or five */
+/* iterations will be neede -- so this would only speed up by */
+/* 20-25% and that probably does not justify increasing the table */
+/* size. */
+/* */
+/* 5. The static buffers are larger than might be expected to allow */
+/* for calls from decNumberPower. */
+/* ------------------------------------------------------------------ */
+decNumber * decLnOp(decNumber *res, const decNumber *rhs,
+ decContext *set, uInt *status) {
+ uInt ignore=0; /* working status accumulator */
+ uInt needbytes; /* for space calculations */
+ Int residue; /* rounding residue */
+ Int r; /* rhs=f*10**r [see below] */
+ Int p; /* working precision */
+ Int pp; /* precision for iteration */
+ Int t; /* work */
+
+ /* buffers for a (accumulator, typically precision+2) and b */
+ /* (adjustment calculator, same size) */
+ decNumber bufa[D2N(DECBUFFER+12)];
+ decNumber *allocbufa=NULL; /* -> allocated bufa, iff allocated */
+ decNumber *a=bufa; /* accumulator/work */
+ decNumber bufb[D2N(DECBUFFER*2+2)];
+ decNumber *allocbufb=NULL; /* -> allocated bufa, iff allocated */
+ decNumber *b=bufb; /* adjustment/work */
+
+ decNumber numone; /* constant 1 */
+ decNumber cmp; /* work */
+ decContext aset, bset; /* working contexts */
+
+ #if DECCHECK
+ Int iterations=0; /* for later sanity check */
+ if (decCheckOperands(res, DECUNUSED, rhs, set)) return res;
+ #endif
+
+ do { /* protect allocated storage */
+ if (SPECIALARG) { /* handle infinities and NaNs */
+ if (decNumberIsInfinite(rhs)) { /* an infinity */
+ if (decNumberIsNegative(rhs)) /* -Infinity -> error */
+ *status|=DEC_Invalid_operation;
+ else decNumberCopy(res, rhs); /* +Infinity -> self */
+ }
+ else decNaNs(res, rhs, NULL, set, status); /* a NaN */
+ break;}
+
+ if (ISZERO(rhs)) { /* +/- zeros -> -Infinity */
+ decNumberZero(res); /* make clean */
+ res->bits=DECINF|DECNEG; /* set - infinity */
+ break;} /* [no status to set] */
+
+ /* Non-zero negatives are bad... */
+ if (decNumberIsNegative(rhs)) { /* -x -> error */
+ *status|=DEC_Invalid_operation;
+ break;}
+
+ /* Here, rhs is positive, finite, and in range */
+
+ /* lookaside fastpath code for ln(2) and ln(10) at common lengths */
+ if (rhs->exponent==0 && set->digits<=40) {
+ #if DECDPUN==1
+ if (rhs->lsu[0]==0 && rhs->lsu[1]==1 && rhs->digits==2) { /* ln(10) */
+ #else
+ if (rhs->lsu[0]==10 && rhs->digits==2) { /* ln(10) */
+ #endif
+ aset=*set; aset.round=DEC_ROUND_HALF_EVEN;
+ #define LN10 "2.302585092994045684017991454684364207601"
+ decNumberFromString(res, LN10, &aset);
+ *status|=(DEC_Inexact | DEC_Rounded); /* is inexact */
+ break;}
+ if (rhs->lsu[0]==2 && rhs->digits==1) { /* ln(2) */
+ aset=*set; aset.round=DEC_ROUND_HALF_EVEN;
+ #define LN2 "0.6931471805599453094172321214581765680755"
+ decNumberFromString(res, LN2, &aset);
+ *status|=(DEC_Inexact | DEC_Rounded);
+ break;}
+ } /* integer and short */
+
+ /* Determine the working precision. This is normally the */
+ /* requested precision + 2, with a minimum of 9. However, if */
+ /* the rhs is 'over-precise' then allow for all its digits to */
+ /* potentially participate (consider an rhs where all the excess */
+ /* digits are 9s) so in this case use rhs->digits+2. */
+ p=MAXI(rhs->digits, MAXI(set->digits, 7))+2;
+
+ /* Allocate space for the accumulator and the high-precision */
+ /* adjustment calculator, if necessary. The accumulator must */
+ /* be able to hold p digits, and the adjustment up to */
+ /* rhs->digits+p digits. They are also made big enough for 16 */
+ /* digits so that they can be used for calculating the initial */
+ /* estimate. */
+ needbytes=sizeof(decNumber)+(D2U(MAXI(p,16))-1)*sizeof(Unit);
+ if (needbytes>sizeof(bufa)) { /* need malloc space */
+ allocbufa=(decNumber *)malloc(needbytes);
+ if (allocbufa==NULL) { /* hopeless -- abandon */
+ *status|=DEC_Insufficient_storage;
+ break;}
+ a=allocbufa; /* use the allocated space */
+ }
+ pp=p+rhs->digits;
+ needbytes=sizeof(decNumber)+(D2U(MAXI(pp,16))-1)*sizeof(Unit);
+ if (needbytes>sizeof(bufb)) { /* need malloc space */
+ allocbufb=(decNumber *)malloc(needbytes);
+ if (allocbufb==NULL) { /* hopeless -- abandon */
+ *status|=DEC_Insufficient_storage;
+ break;}
+ b=allocbufb; /* use the allocated space */
+ }
+
+ /* Prepare an initial estimate in acc. Calculate this by */
+ /* considering the coefficient of x to be a normalized fraction, */
+ /* f, with the decimal point at far left and multiplied by */
+ /* 10**r. Then, rhs=f*10**r and 0.1<=f<1, and */
+ /* ln(x) = ln(f) + ln(10)*r */
+ /* Get the initial estimate for ln(f) from a small lookup */
+ /* table (see above) indexed by the first two digits of f, */
+ /* truncated. */
+
+ decContextDefault(&aset, DEC_INIT_DECIMAL64); /* 16-digit extended */
+ r=rhs->exponent+rhs->digits; /* 'normalised' exponent */
+ decNumberFromInt32(a, r); /* a=r */
+ decNumberFromInt32(b, 2302585); /* b=ln(10) (2.302585) */
+ b->exponent=-6; /* .. */
+ decMultiplyOp(a, a, b, &aset, &ignore); /* a=a*b */
+ /* now get top two digits of rhs into b by simple truncate and */
+ /* force to integer */
+ residue=0; /* (no residue) */
+ aset.digits=2; aset.round=DEC_ROUND_DOWN;
+ decCopyFit(b, rhs, &aset, &residue, &ignore); /* copy & shorten */
+ b->exponent=0; /* make integer */
+ t=decGetInt(b); /* [cannot fail] */
+ if (t<10) t=X10(t); /* adjust single-digit b */
+ t=LNnn[t-10]; /* look up ln(b) */
+ decNumberFromInt32(b, t>>2); /* b=ln(b) coefficient */
+ b->exponent=-(t&3)-3; /* set exponent */
+ b->bits=DECNEG; /* ln(0.10)->ln(0.99) always -ve */
+ aset.digits=16; aset.round=DEC_ROUND_HALF_EVEN; /* restore */
+ decAddOp(a, a, b, &aset, 0, &ignore); /* acc=a+b */
+ /* the initial estimate is now in a, with up to 4 digits correct. */
+ /* When rhs is at or near Nmax the estimate will be low, so we */
+ /* will approach it from below, avoiding overflow when calling exp. */
+
+ decNumberZero(&numone); *numone.lsu=1; /* constant 1 for adjustment */
+
+ /* accumulator bounds are as requested (could underflow, but */
+ /* cannot overflow) */
+ aset.emax=set->emax;
+ aset.emin=set->emin;
+ aset.clamp=0; /* no concrete format */
+ /* set up a context to be used for the multiply and subtract */
+ bset=aset;
+ bset.emax=DEC_MAX_MATH*2; /* use double bounds for the */
+ bset.emin=-DEC_MAX_MATH*2; /* adjustment calculation */
+ /* [see decExpOp call below] */
+ /* for each iteration double the number of digits to calculate, */
+ /* up to a maximum of p */
+ pp=9; /* initial precision */
+ /* [initially 9 as then the sequence starts 7+2, 16+2, and */
+ /* 34+2, which is ideal for standard-sized numbers] */
+ aset.digits=pp; /* working context */
+ bset.digits=pp+rhs->digits; /* wider context */
+ for (;;) { /* iterate */
+ #if DECCHECK
+ iterations++;
+ if (iterations>24) break; /* consider 9 * 2**24 */
+ #endif
+ /* calculate the adjustment (exp(-a)*x-1) into b. This is a */
+ /* catastrophic subtraction but it really is the difference */
+ /* from 1 that is of interest. */
+ /* Use the internal entry point to Exp as it allows the double */
+ /* range for calculating exp(-a) when a is the tiniest subnormal. */
+ a->bits^=DECNEG; /* make -a */
+ decExpOp(b, a, &bset, &ignore); /* b=exp(-a) */
+ a->bits^=DECNEG; /* restore sign of a */
+ /* now multiply by rhs and subtract 1, at the wider precision */
+ decMultiplyOp(b, b, rhs, &bset, &ignore); /* b=b*rhs */
+ decAddOp(b, b, &numone, &bset, DECNEG, &ignore); /* b=b-1 */
+
+ /* the iteration ends when the adjustment cannot affect the */
+ /* result by >=0.5 ulp (at the requested digits), which */
+ /* is when its value is smaller than the accumulator by */
+ /* set->digits+1 digits (or it is zero) -- this is a looser */
+ /* requirement than for Exp because all that happens to the */
+ /* accumulator after this is the final rounding (but note that */
+ /* there must also be full precision in a, or a=0). */
+
+ if (decNumberIsZero(b) ||
+ (a->digits+a->exponent)>=(b->digits+b->exponent+set->digits+1)) {
+ if (a->digits==p) break;
+ if (decNumberIsZero(a)) {
+ decCompareOp(&cmp, rhs, &numone, &aset, COMPARE, &ignore); /* rhs=1 ? */
+ if (cmp.lsu[0]==0) a->exponent=0; /* yes, exact 0 */
+ else *status|=(DEC_Inexact | DEC_Rounded); /* no, inexact */
+ break;
+ }
+ /* force padding if adjustment has gone to 0 before full length */
+ if (decNumberIsZero(b)) b->exponent=a->exponent-p;
+ }
+
+ /* not done yet ... */
+ decAddOp(a, a, b, &aset, 0, &ignore); /* a=a+b for next estimate */
+ if (pp==p) continue; /* precision is at maximum */
+ /* lengthen the next calculation */
+ pp=pp*2; /* double precision */
+ if (pp>p) pp=p; /* clamp to maximum */
+ aset.digits=pp; /* working context */
+ bset.digits=pp+rhs->digits; /* wider context */
+ } /* Newton's iteration */
+
+ #if DECCHECK
+ /* just a sanity check; remove the test to show always */
+ if (iterations>24)
+ printf("Ln iterations=%ld, status=%08lx, p=%ld, d=%ld\n",
+ iterations, *status, p, rhs->digits);
+ #endif
+
+ /* Copy and round the result to res */
+ residue=1; /* indicate dirt to right */
+ if (ISZERO(a)) residue=0; /* .. unless underflowed to 0 */
+ aset.digits=set->digits; /* [use default rounding] */
+ decCopyFit(res, a, &aset, &residue, status); /* copy & shorten */
+ decFinish(res, set, &residue, status); /* cleanup/set flags */
+ } while(0); /* end protected */
+
+ if (allocbufa!=NULL) free(allocbufa); /* drop any storage used */
+ if (allocbufb!=NULL) free(allocbufb); /* .. */
+ /* [status is handled by caller] */
+ return res;
+ } /* decLnOp */
+
+/* ------------------------------------------------------------------ */
+/* decQuantizeOp -- force exponent to requested value */
+/* */
+/* This computes C = op(A, B), where op adjusts the coefficient */
+/* of C (by rounding or shifting) such that the exponent (-scale) */
+/* of C has the value B or matches the exponent of B. */
+/* The numerical value of C will equal A, except for the effects of */
+/* any rounding that occurred. */
+/* */
+/* res is C, the result. C may be A or B */
+/* lhs is A, the number to adjust */
+/* rhs is B, the requested exponent */
+/* set is the context */
+/* quant is 1 for quantize or 0 for rescale */
+/* status is the status accumulator (this can be called without */
+/* risk of control loss) */
+/* */
+/* C must have space for set->digits digits. */
+/* */
+/* Unless there is an error or the result is infinite, the exponent */
+/* after the operation is guaranteed to be that requested. */
+/* ------------------------------------------------------------------ */
+static decNumber * decQuantizeOp(decNumber *res, const decNumber *lhs,
+ const decNumber *rhs, decContext *set,
+ Flag quant, uInt *status) {
+ #if DECSUBSET
+ decNumber *alloclhs=NULL; /* non-NULL if rounded lhs allocated */
+ decNumber *allocrhs=NULL; /* .., rhs */
+ #endif
+ const decNumber *inrhs=rhs; /* save original rhs */
+ Int reqdigits=set->digits; /* requested DIGITS */
+ Int reqexp; /* requested exponent [-scale] */
+ Int residue=0; /* rounding residue */
+ Int etiny=set->emin-(reqdigits-1);
+
+ #if DECCHECK
+ if (decCheckOperands(res, lhs, rhs, set)) return res;
+ #endif
+
+ do { /* protect allocated storage */
+ #if DECSUBSET
+ if (!set->extended) {
+ /* reduce operands and set lostDigits status, as needed */
+ if (lhs->digits>reqdigits) {
+ alloclhs=decRoundOperand(lhs, set, status);
+ if (alloclhs==NULL) break;
+ lhs=alloclhs;
+ }
+ if (rhs->digits>reqdigits) { /* [this only checks lostDigits] */
+ allocrhs=decRoundOperand(rhs, set, status);
+ if (allocrhs==NULL) break;
+ rhs=allocrhs;
+ }
+ }
+ #endif
+ /* [following code does not require input rounding] */
+
+ /* Handle special values */
+ if (SPECIALARGS) {
+ /* NaNs get usual processing */
+ if (SPECIALARGS & (DECSNAN | DECNAN))
+ decNaNs(res, lhs, rhs, set, status);
+ /* one infinity but not both is bad */
+ else if ((lhs->bits ^ rhs->bits) & DECINF)
+ *status|=DEC_Invalid_operation;
+ /* both infinity: return lhs */
+ else decNumberCopy(res, lhs); /* [nop if in place] */
+ break;
+ }
+
+ /* set requested exponent */
+ if (quant) reqexp=inrhs->exponent; /* quantize -- match exponents */
+ else { /* rescale -- use value of rhs */
+ /* Original rhs must be an integer that fits and is in range, */
+ /* which could be from -1999999997 to +999999999, thanks to */
+ /* subnormals */
+ reqexp=decGetInt(inrhs); /* [cannot fail] */
+ }
+
+ #if DECSUBSET
+ if (!set->extended) etiny=set->emin; /* no subnormals */
+ #endif
+
+ if (reqexp==BADINT /* bad (rescale only) or .. */
+ || reqexp==BIGODD || reqexp==BIGEVEN /* very big (ditto) or .. */
+ || (reqexp<etiny) /* < lowest */
+ || (reqexp>set->emax)) { /* > emax */
+ *status|=DEC_Invalid_operation;
+ break;}
+
+ /* the RHS has been processed, so it can be overwritten now if necessary */
+ if (ISZERO(lhs)) { /* zero coefficient unchanged */
+ decNumberCopy(res, lhs); /* [nop if in place] */
+ res->exponent=reqexp; /* .. just set exponent */
+ #if DECSUBSET
+ if (!set->extended) res->bits=0; /* subset specification; no -0 */
+ #endif
+ }
+ else { /* non-zero lhs */
+ Int adjust=reqexp-lhs->exponent; /* digit adjustment needed */
+ /* if adjusted coefficient will definitely not fit, give up now */
+ if ((lhs->digits-adjust)>reqdigits) {
+ *status|=DEC_Invalid_operation;
+ break;
+ }
+
+ if (adjust>0) { /* increasing exponent */
+ /* this will decrease the length of the coefficient by adjust */
+ /* digits, and must round as it does so */
+ decContext workset; /* work */
+ workset=*set; /* clone rounding, etc. */
+ workset.digits=lhs->digits-adjust; /* set requested length */
+ /* [note that the latter can be <1, here] */
+ decCopyFit(res, lhs, &workset, &residue, status); /* fit to result */
+ decApplyRound(res, &workset, residue, status); /* .. and round */
+ residue=0; /* [used] */
+ /* If just rounded a 999s case, exponent will be off by one; */
+ /* adjust back (after checking space), if so. */
+ if (res->exponent>reqexp) {
+ /* re-check needed, e.g., for quantize(0.9999, 0.001) under */
+ /* set->digits==3 */
+ if (res->digits==reqdigits) { /* cannot shift by 1 */
+ *status&=~(DEC_Inexact | DEC_Rounded); /* [clean these] */
+ *status|=DEC_Invalid_operation;
+ break;
+ }
+ res->digits=decShiftToMost(res->lsu, res->digits, 1); /* shift */
+ res->exponent--; /* (re)adjust the exponent. */
+ }
+ #if DECSUBSET
+ if (ISZERO(res) && !set->extended) res->bits=0; /* subset; no -0 */
+ #endif
+ } /* increase */
+ else /* adjust<=0 */ { /* decreasing or = exponent */
+ /* this will increase the length of the coefficient by -adjust */
+ /* digits, by adding zero or more trailing zeros; this is */
+ /* already checked for fit, above */
+ decNumberCopy(res, lhs); /* [it will fit] */
+ /* if padding needed (adjust<0), add it now... */
+ if (adjust<0) {
+ res->digits=decShiftToMost(res->lsu, res->digits, -adjust);
+ res->exponent+=adjust; /* adjust the exponent */
+ }
+ } /* decrease */
+ } /* non-zero */
+
+ /* Check for overflow [do not use Finalize in this case, as an */
+ /* overflow here is a "don't fit" situation] */
+ if (res->exponent>set->emax-res->digits+1) { /* too big */
+ *status|=DEC_Invalid_operation;
+ break;
+ }
+ else {
+ decFinalize(res, set, &residue, status); /* set subnormal flags */
+ *status&=~DEC_Underflow; /* suppress Underflow [754r] */
+ }
+ } while(0); /* end protected */
+
+ #if DECSUBSET
+ if (allocrhs!=NULL) free(allocrhs); /* drop any storage used */
+ if (alloclhs!=NULL) free(alloclhs); /* .. */
+ #endif
+ return res;
+ } /* decQuantizeOp */
+
+/* ------------------------------------------------------------------ */
+/* decCompareOp -- compare, min, or max two Numbers */
+/* */
+/* This computes C = A ? B and carries out one of four operations: */
+/* COMPARE -- returns the signum (as a number) giving the */
+/* result of a comparison unless one or both */
+/* operands is a NaN (in which case a NaN results) */
+/* COMPSIG -- as COMPARE except that a quiet NaN raises */
+/* Invalid operation. */
+/* COMPMAX -- returns the larger of the operands, using the */
+/* 754r maxnum operation */
+/* COMPMAXMAG -- ditto, comparing absolute values */
+/* COMPMIN -- the 754r minnum operation */
+/* COMPMINMAG -- ditto, comparing absolute values */
+/* COMTOTAL -- returns the signum (as a number) giving the */
+/* result of a comparison using 754r total ordering */
+/* */
+/* res is C, the result. C may be A and/or B (e.g., X=X?X) */
+/* lhs is A */
+/* rhs is B */
+/* set is the context */
+/* op is the operation flag */
+/* status is the usual accumulator */
+/* */
+/* C must have space for one digit for COMPARE or set->digits for */
+/* COMPMAX, COMPMIN, COMPMAXMAG, or COMPMINMAG. */
+/* ------------------------------------------------------------------ */
+/* The emphasis here is on speed for common cases, and avoiding */
+/* coefficient comparison if possible. */
+/* ------------------------------------------------------------------ */
+decNumber * decCompareOp(decNumber *res, const decNumber *lhs,
+ const decNumber *rhs, decContext *set,
+ Flag op, uInt *status) {
+ #if DECSUBSET
+ decNumber *alloclhs=NULL; /* non-NULL if rounded lhs allocated */
+ decNumber *allocrhs=NULL; /* .., rhs */
+ #endif
+ Int result=0; /* default result value */
+ uByte merged; /* work */
+
+ #if DECCHECK
+ if (decCheckOperands(res, lhs, rhs, set)) return res;
+ #endif
+
+ do { /* protect allocated storage */
+ #if DECSUBSET
+ if (!set->extended) {
+ /* reduce operands and set lostDigits status, as needed */
+ if (lhs->digits>set->digits) {
+ alloclhs=decRoundOperand(lhs, set, status);
+ if (alloclhs==NULL) {result=BADINT; break;}
+ lhs=alloclhs;
+ }
+ if (rhs->digits>set->digits) {
+ allocrhs=decRoundOperand(rhs, set, status);
+ if (allocrhs==NULL) {result=BADINT; break;}
+ rhs=allocrhs;
+ }
+ }
+ #endif
+ /* [following code does not require input rounding] */
+
+ /* If total ordering then handle differing signs 'up front' */
+ if (op==COMPTOTAL) { /* total ordering */
+ if (decNumberIsNegative(lhs) & !decNumberIsNegative(rhs)) {
+ result=-1;
+ break;
+ }
+ if (!decNumberIsNegative(lhs) & decNumberIsNegative(rhs)) {
+ result=+1;
+ break;
+ }
+ }
+
+ /* handle NaNs specially; let infinities drop through */
+ /* This assumes sNaN (even just one) leads to NaN. */
+ merged=(lhs->bits | rhs->bits) & (DECSNAN | DECNAN);
+ if (merged) { /* a NaN bit set */
+ if (op==COMPARE); /* result will be NaN */
+ else if (op==COMPSIG) /* treat qNaN as sNaN */
+ *status|=DEC_Invalid_operation | DEC_sNaN;
+ else if (op==COMPTOTAL) { /* total ordering, always finite */
+ /* signs are known to be the same; compute the ordering here */
+ /* as if the signs are both positive, then invert for negatives */
+ if (!decNumberIsNaN(lhs)) result=-1;
+ else if (!decNumberIsNaN(rhs)) result=+1;
+ /* here if both NaNs */
+ else if (decNumberIsSNaN(lhs) && decNumberIsQNaN(rhs)) result=-1;
+ else if (decNumberIsQNaN(lhs) && decNumberIsSNaN(rhs)) result=+1;
+ else { /* both NaN or both sNaN */
+ /* now it just depends on the payload */
+ result=decUnitCompare(lhs->lsu, D2U(lhs->digits),
+ rhs->lsu, D2U(rhs->digits), 0);
+ /* [Error not possible, as these are 'aligned'] */
+ } /* both same NaNs */
+ if (decNumberIsNegative(lhs)) result=-result;
+ break;
+ } /* total order */
+
+ else if (merged & DECSNAN); /* sNaN -> qNaN */
+ else { /* here if MIN or MAX and one or two quiet NaNs */
+ /* min or max -- 754r rules ignore single NaN */
+ if (!decNumberIsNaN(lhs) || !decNumberIsNaN(rhs)) {
+ /* just one NaN; force choice to be the non-NaN operand */
+ op=COMPMAX;
+ if (lhs->bits & DECNAN) result=-1; /* pick rhs */
+ else result=+1; /* pick lhs */
+ break;
+ }
+ } /* max or min */
+ op=COMPNAN; /* use special path */
+ decNaNs(res, lhs, rhs, set, status); /* propagate NaN */
+ break;
+ }
+ /* have numbers */
+ if (op==COMPMAXMAG || op==COMPMINMAG) result=decCompare(lhs, rhs, 1);
+ else result=decCompare(lhs, rhs, 0); /* sign matters */
+ } while(0); /* end protected */
+
+ if (result==BADINT) *status|=DEC_Insufficient_storage; /* rare */
+ else {
+ if (op==COMPARE || op==COMPSIG ||op==COMPTOTAL) { /* returning signum */
+ if (op==COMPTOTAL && result==0) {
+ /* operands are numerically equal or same NaN (and same sign, */
+ /* tested first); if identical, leave result 0 */
+ if (lhs->exponent!=rhs->exponent) {
+ if (lhs->exponent<rhs->exponent) result=-1;
+ else result=+1;
+ if (decNumberIsNegative(lhs)) result=-result;
+ } /* lexp!=rexp */
+ } /* total-order by exponent */
+ decNumberZero(res); /* [always a valid result] */
+ if (result!=0) { /* must be -1 or +1 */
+ *res->lsu=1;
+ if (result<0) res->bits=DECNEG;
+ }
+ }
+ else if (op==COMPNAN); /* special, drop through */
+ else { /* MAX or MIN, non-NaN result */
+ Int residue=0; /* rounding accumulator */
+ /* choose the operand for the result */
+ const decNumber *choice;
+ if (result==0) { /* operands are numerically equal */
+ /* choose according to sign then exponent (see 754r) */
+ uByte slhs=(lhs->bits & DECNEG);
+ uByte srhs=(rhs->bits & DECNEG);
+ #if DECSUBSET
+ if (!set->extended) { /* subset: force left-hand */
+ op=COMPMAX;
+ result=+1;
+ }
+ else
+ #endif
+ if (slhs!=srhs) { /* signs differ */
+ if (slhs) result=-1; /* rhs is max */
+ else result=+1; /* lhs is max */
+ }
+ else if (slhs && srhs) { /* both negative */
+ if (lhs->exponent<rhs->exponent) result=+1;
+ else result=-1;
+ /* [if equal, use lhs, technically identical] */
+ }
+ else { /* both positive */
+ if (lhs->exponent>rhs->exponent) result=+1;
+ else result=-1;
+ /* [ditto] */
+ }
+ } /* numerically equal */
+ /* here result will be non-0; reverse if looking for MIN */
+ if (op==COMPMIN || op==COMPMINMAG) result=-result;
+ choice=(result>0 ? lhs : rhs); /* choose */
+ /* copy chosen to result, rounding if need be */
+ decCopyFit(res, choice, set, &residue, status);
+ decFinish(res, set, &residue, status);
+ }
+ }
+ #if DECSUBSET
+ if (allocrhs!=NULL) free(allocrhs); /* free any storage used */
+ if (alloclhs!=NULL) free(alloclhs); /* .. */
+ #endif
+ return res;
+ } /* decCompareOp */
+
+/* ------------------------------------------------------------------ */
+/* decCompare -- compare two decNumbers by numerical value */
+/* */
+/* This routine compares A ? B without altering them. */
+/* */
+/* Arg1 is A, a decNumber which is not a NaN */
+/* Arg2 is B, a decNumber which is not a NaN */
+/* Arg3 is 1 for a sign-independent compare, 0 otherwise */
+/* */
+/* returns -1, 0, or 1 for A<B, A==B, or A>B, or BADINT if failure */
+/* (the only possible failure is an allocation error) */
+/* ------------------------------------------------------------------ */
+static Int decCompare(const decNumber *lhs, const decNumber *rhs,
+ Flag abs) {
+ Int result; /* result value */
+ Int sigr; /* rhs signum */
+ Int compare; /* work */
+
+ result=1; /* assume signum(lhs) */
+ if (ISZERO(lhs)) result=0;
+ if (abs) {
+ if (ISZERO(rhs)) return result; /* LHS wins or both 0 */
+ /* RHS is non-zero */
+ if (result==0) return -1; /* LHS is 0; RHS wins */
+ /* [here, both non-zero, result=1] */
+ }
+ else { /* signs matter */
+ if (result && decNumberIsNegative(lhs)) result=-1;
+ sigr=1; /* compute signum(rhs) */
+ if (ISZERO(rhs)) sigr=0;
+ else if (decNumberIsNegative(rhs)) sigr=-1;
+ if (result > sigr) return +1; /* L > R, return 1 */
+ if (result < sigr) return -1; /* L < R, return -1 */
+ if (result==0) return 0; /* both 0 */
+ }
+
+ /* signums are the same; both are non-zero */
+ if ((lhs->bits | rhs->bits) & DECINF) { /* one or more infinities */
+ if (decNumberIsInfinite(rhs)) {
+ if (decNumberIsInfinite(lhs)) result=0;/* both infinite */
+ else result=-result; /* only rhs infinite */
+ }
+ return result;
+ }
+ /* must compare the coefficients, allowing for exponents */
+ if (lhs->exponent>rhs->exponent) { /* LHS exponent larger */
+ /* swap sides, and sign */
+ const decNumber *temp=lhs;
+ lhs=rhs;
+ rhs=temp;
+ result=-result;
+ }
+ compare=decUnitCompare(lhs->lsu, D2U(lhs->digits),
+ rhs->lsu, D2U(rhs->digits),
+ rhs->exponent-lhs->exponent);
+ if (compare!=BADINT) compare*=result; /* comparison succeeded */
+ return compare;
+ } /* decCompare */
+
+/* ------------------------------------------------------------------ */
+/* decUnitCompare -- compare two >=0 integers in Unit arrays */
+/* */
+/* This routine compares A ? B*10**E where A and B are unit arrays */
+/* A is a plain integer */
+/* B has an exponent of E (which must be non-negative) */
+/* */
+/* Arg1 is A first Unit (lsu) */
+/* Arg2 is A length in Units */
+/* Arg3 is B first Unit (lsu) */
+/* Arg4 is B length in Units */
+/* Arg5 is E (0 if the units are aligned) */
+/* */
+/* returns -1, 0, or 1 for A<B, A==B, or A>B, or BADINT if failure */
+/* (the only possible failure is an allocation error, which can */
+/* only occur if E!=0) */
+/* ------------------------------------------------------------------ */
+static Int decUnitCompare(const Unit *a, Int alength,
+ const Unit *b, Int blength, Int exp) {
+ Unit *acc; /* accumulator for result */
+ Unit accbuff[SD2U(DECBUFFER*2+1)]; /* local buffer */
+ Unit *allocacc=NULL; /* -> allocated acc buffer, iff allocated */
+ Int accunits, need; /* units in use or needed for acc */
+ const Unit *l, *r, *u; /* work */
+ Int expunits, exprem, result; /* .. */
+
+ if (exp==0) { /* aligned; fastpath */
+ if (alength>blength) return 1;
+ if (alength<blength) return -1;
+ /* same number of units in both -- need unit-by-unit compare */
+ l=a+alength-1;
+ r=b+alength-1;
+ for (;l>=a; l--, r--) {
+ if (*l>*r) return 1;
+ if (*l<*r) return -1;
+ }
+ return 0; /* all units match */
+ } /* aligned */
+
+ /* Unaligned. If one is >1 unit longer than the other, padded */
+ /* approximately, then can return easily */
+ if (alength>blength+(Int)D2U(exp)) return 1;
+ if (alength+1<blength+(Int)D2U(exp)) return -1;
+
+ /* Need to do a real subtract. For this, a result buffer is needed */
+ /* even though only the sign is of interest. Its length needs */
+ /* to be the larger of alength and padded blength, +2 */
+ need=blength+D2U(exp); /* maximum real length of B */
+ if (need<alength) need=alength;
+ need+=2;
+ acc=accbuff; /* assume use local buffer */
+ if (need*sizeof(Unit)>sizeof(accbuff)) {
+ allocacc=(Unit *)malloc(need*sizeof(Unit));
+ if (allocacc==NULL) return BADINT; /* hopeless -- abandon */
+ acc=allocacc;
+ }
+ /* Calculate units and remainder from exponent. */
+ expunits=exp/DECDPUN;
+ exprem=exp%DECDPUN;
+ /* subtract [A+B*(-m)] */
+ accunits=decUnitAddSub(a, alength, b, blength, expunits, acc,
+ -(Int)powers[exprem]);
+ /* [UnitAddSub result may have leading zeros, even on zero] */
+ if (accunits<0) result=-1; /* negative result */
+ else { /* non-negative result */
+ /* check units of the result before freeing any storage */
+ for (u=acc; u<acc+accunits-1 && *u==0;) u++;
+ result=(*u==0 ? 0 : +1);
+ }
+ /* clean up and return the result */
+ if (allocacc!=NULL) free(allocacc); /* drop any storage used */
+ return result;
+ } /* decUnitCompare */
+
+/* ------------------------------------------------------------------ */
+/* decUnitAddSub -- add or subtract two >=0 integers in Unit arrays */
+/* */
+/* This routine performs the calculation: */
+/* */
+/* C=A+(B*M) */
+/* */
+/* Where M is in the range -DECDPUNMAX through +DECDPUNMAX. */
+/* */
+/* A may be shorter or longer than B. */
+/* */
+/* Leading zeros are not removed after a calculation. The result is */
+/* either the same length as the longer of A and B (adding any */
+/* shift), or one Unit longer than that (if a Unit carry occurred). */
+/* */
+/* A and B content are not altered unless C is also A or B. */
+/* C may be the same array as A or B, but only if no zero padding is */
+/* requested (that is, C may be B only if bshift==0). */
+/* C is filled from the lsu; only those units necessary to complete */
+/* the calculation are referenced. */
+/* */
+/* Arg1 is A first Unit (lsu) */
+/* Arg2 is A length in Units */
+/* Arg3 is B first Unit (lsu) */
+/* Arg4 is B length in Units */
+/* Arg5 is B shift in Units (>=0; pads with 0 units if positive) */
+/* Arg6 is C first Unit (lsu) */
+/* Arg7 is M, the multiplier */
+/* */
+/* returns the count of Units written to C, which will be non-zero */
+/* and negated if the result is negative. That is, the sign of the */
+/* returned Int is the sign of the result (positive for zero) and */
+/* the absolute value of the Int is the count of Units. */
+/* */
+/* It is the caller's responsibility to make sure that C size is */
+/* safe, allowing space if necessary for a one-Unit carry. */
+/* */
+/* This routine is severely performance-critical; *any* change here */
+/* must be measured (timed) to assure no performance degradation. */
+/* In particular, trickery here tends to be counter-productive, as */
+/* increased complexity of code hurts register optimizations on */
+/* register-poor architectures. Avoiding divisions is nearly */
+/* always a Good Idea, however. */
+/* */
+/* Special thanks to Rick McGuire (IBM Cambridge, MA) and Dave Clark */
+/* (IBM Warwick, UK) for some of the ideas used in this routine. */
+/* ------------------------------------------------------------------ */
+static Int decUnitAddSub(const Unit *a, Int alength,
+ const Unit *b, Int blength, Int bshift,
+ Unit *c, Int m) {
+ const Unit *alsu=a; /* A lsu [need to remember it] */
+ Unit *clsu=c; /* C ditto */
+ Unit *minC; /* low water mark for C */
+ Unit *maxC; /* high water mark for C */
+ eInt carry=0; /* carry integer (could be Long) */
+ Int add; /* work */
+ #if DECDPUN<=4 /* myriadal, millenary, etc. */
+ Int est; /* estimated quotient */
+ #endif
+
+ #if DECTRACE
+ if (alength<1 || blength<1)
+ printf("decUnitAddSub: alen blen m %ld %ld [%ld]\n", alength, blength, m);
+ #endif
+
+ maxC=c+alength; /* A is usually the longer */
+ minC=c+blength; /* .. and B the shorter */
+ if (bshift!=0) { /* B is shifted; low As copy across */
+ minC+=bshift;
+ /* if in place [common], skip copy unless there's a gap [rare] */
+ if (a==c && bshift<=alength) {
+ c+=bshift;
+ a+=bshift;
+ }
+ else for (; c<clsu+bshift; a++, c++) { /* copy needed */
+ if (a<alsu+alength) *c=*a;
+ else *c=0;
+ }
+ }
+ if (minC>maxC) { /* swap */
+ Unit *hold=minC;
+ minC=maxC;
+ maxC=hold;
+ }
+
+ /* For speed, do the addition as two loops; the first where both A */
+ /* and B contribute, and the second (if necessary) where only one or */
+ /* other of the numbers contribute. */
+ /* Carry handling is the same (i.e., duplicated) in each case. */
+ for (; c<minC; c++) {
+ carry+=*a;
+ a++;
+ carry+=((eInt)*b)*m; /* [special-casing m=1/-1 */
+ b++; /* here is not a win] */
+ /* here carry is new Unit of digits; it could be +ve or -ve */
+ if ((ueInt)carry<=DECDPUNMAX) { /* fastpath 0-DECDPUNMAX */
+ *c=(Unit)carry;
+ carry=0;
+ continue;
+ }
+ #if DECDPUN==4 /* use divide-by-multiply */
+ if (carry>=0) {
+ est=(((ueInt)carry>>11)*53687)>>18;
+ *c=(Unit)(carry-est*(DECDPUNMAX+1)); /* remainder */
+ carry=est; /* likely quotient [89%] */
+ if (*c<DECDPUNMAX+1) continue; /* estimate was correct */
+ carry++;
+ *c-=DECDPUNMAX+1;
+ continue;
+ }
+ /* negative case */
+ carry=carry+(eInt)(DECDPUNMAX+1)*(DECDPUNMAX+1); /* make positive */
+ est=(((ueInt)carry>>11)*53687)>>18;
+ *c=(Unit)(carry-est*(DECDPUNMAX+1));
+ carry=est-(DECDPUNMAX+1); /* correctly negative */
+ if (*c<DECDPUNMAX+1) continue; /* was OK */
+ carry++;
+ *c-=DECDPUNMAX+1;
+ #elif DECDPUN==3
+ if (carry>=0) {
+ est=(((ueInt)carry>>3)*16777)>>21;
+ *c=(Unit)(carry-est*(DECDPUNMAX+1)); /* remainder */
+ carry=est; /* likely quotient [99%] */
+ if (*c<DECDPUNMAX+1) continue; /* estimate was correct */
+ carry++;
+ *c-=DECDPUNMAX+1;
+ continue;
+ }
+ /* negative case */
+ carry=carry+(eInt)(DECDPUNMAX+1)*(DECDPUNMAX+1); /* make positive */
+ est=(((ueInt)carry>>3)*16777)>>21;
+ *c=(Unit)(carry-est*(DECDPUNMAX+1));
+ carry=est-(DECDPUNMAX+1); /* correctly negative */
+ if (*c<DECDPUNMAX+1) continue; /* was OK */
+ carry++;
+ *c-=DECDPUNMAX+1;
+ #elif DECDPUN<=2
+ /* Can use QUOT10 as carry <= 4 digits */
+ if (carry>=0) {
+ est=QUOT10(carry, DECDPUN);
+ *c=(Unit)(carry-est*(DECDPUNMAX+1)); /* remainder */
+ carry=est; /* quotient */
+ continue;
+ }
+ /* negative case */
+ carry=carry+(eInt)(DECDPUNMAX+1)*(DECDPUNMAX+1); /* make positive */
+ est=QUOT10(carry, DECDPUN);
+ *c=(Unit)(carry-est*(DECDPUNMAX+1));
+ carry=est-(DECDPUNMAX+1); /* correctly negative */
+ #else
+ /* remainder operator is undefined if negative, so must test */
+ if ((ueInt)carry<(DECDPUNMAX+1)*2) { /* fastpath carry +1 */
+ *c=(Unit)(carry-(DECDPUNMAX+1)); /* [helps additions] */
+ carry=1;
+ continue;
+ }
+ if (carry>=0) {
+ *c=(Unit)(carry%(DECDPUNMAX+1));
+ carry=carry/(DECDPUNMAX+1);
+ continue;
+ }
+ /* negative case */
+ carry=carry+(eInt)(DECDPUNMAX+1)*(DECDPUNMAX+1); /* make positive */
+ *c=(Unit)(carry%(DECDPUNMAX+1));
+ carry=carry/(DECDPUNMAX+1)-(DECDPUNMAX+1);
+ #endif
+ } /* c */
+
+ /* now may have one or other to complete */
+ /* [pretest to avoid loop setup/shutdown] */
+ if (c<maxC) for (; c<maxC; c++) {
+ if (a<alsu+alength) { /* still in A */
+ carry+=*a;
+ a++;
+ }
+ else { /* inside B */
+ carry+=((eInt)*b)*m;
+ b++;
+ }
+ /* here carry is new Unit of digits; it could be +ve or -ve and */
+ /* magnitude up to DECDPUNMAX squared */
+ if ((ueInt)carry<=DECDPUNMAX) { /* fastpath 0-DECDPUNMAX */
+ *c=(Unit)carry;
+ carry=0;
+ continue;
+ }
+ /* result for this unit is negative or >DECDPUNMAX */
+ #if DECDPUN==4 /* use divide-by-multiply */
+ if (carry>=0) {
+ est=(((ueInt)carry>>11)*53687)>>18;
+ *c=(Unit)(carry-est*(DECDPUNMAX+1)); /* remainder */
+ carry=est; /* likely quotient [79.7%] */
+ if (*c<DECDPUNMAX+1) continue; /* estimate was correct */
+ carry++;
+ *c-=DECDPUNMAX+1;
+ continue;
+ }
+ /* negative case */
+ carry=carry+(eInt)(DECDPUNMAX+1)*(DECDPUNMAX+1); /* make positive */
+ est=(((ueInt)carry>>11)*53687)>>18;
+ *c=(Unit)(carry-est*(DECDPUNMAX+1));
+ carry=est-(DECDPUNMAX+1); /* correctly negative */
+ if (*c<DECDPUNMAX+1) continue; /* was OK */
+ carry++;
+ *c-=DECDPUNMAX+1;
+ #elif DECDPUN==3
+ if (carry>=0) {
+ est=(((ueInt)carry>>3)*16777)>>21;
+ *c=(Unit)(carry-est*(DECDPUNMAX+1)); /* remainder */
+ carry=est; /* likely quotient [99%] */
+ if (*c<DECDPUNMAX+1) continue; /* estimate was correct */
+ carry++;
+ *c-=DECDPUNMAX+1;
+ continue;
+ }
+ /* negative case */
+ carry=carry+(eInt)(DECDPUNMAX+1)*(DECDPUNMAX+1); /* make positive */
+ est=(((ueInt)carry>>3)*16777)>>21;
+ *c=(Unit)(carry-est*(DECDPUNMAX+1));
+ carry=est-(DECDPUNMAX+1); /* correctly negative */
+ if (*c<DECDPUNMAX+1) continue; /* was OK */
+ carry++;
+ *c-=DECDPUNMAX+1;
+ #elif DECDPUN<=2
+ if (carry>=0) {
+ est=QUOT10(carry, DECDPUN);
+ *c=(Unit)(carry-est*(DECDPUNMAX+1)); /* remainder */
+ carry=est; /* quotient */
+ continue;
+ }
+ /* negative case */
+ carry=carry+(eInt)(DECDPUNMAX+1)*(DECDPUNMAX+1); /* make positive */
+ est=QUOT10(carry, DECDPUN);
+ *c=(Unit)(carry-est*(DECDPUNMAX+1));
+ carry=est-(DECDPUNMAX+1); /* correctly negative */
+ #else
+ if ((ueInt)carry<(DECDPUNMAX+1)*2){ /* fastpath carry 1 */
+ *c=(Unit)(carry-(DECDPUNMAX+1));
+ carry=1;
+ continue;
+ }
+ /* remainder operator is undefined if negative, so must test */
+ if (carry>=0) {
+ *c=(Unit)(carry%(DECDPUNMAX+1));
+ carry=carry/(DECDPUNMAX+1);
+ continue;
+ }
+ /* negative case */
+ carry=carry+(eInt)(DECDPUNMAX+1)*(DECDPUNMAX+1); /* make positive */
+ *c=(Unit)(carry%(DECDPUNMAX+1));
+ carry=carry/(DECDPUNMAX+1)-(DECDPUNMAX+1);
+ #endif
+ } /* c */
+
+ /* OK, all A and B processed; might still have carry or borrow */
+ /* return number of Units in the result, negated if a borrow */
+ if (carry==0) return c-clsu; /* no carry, so no more to do */
+ if (carry>0) { /* positive carry */
+ *c=(Unit)carry; /* place as new unit */
+ c++; /* .. */
+ return c-clsu;
+ }
+ /* -ve carry: it's a borrow; complement needed */
+ add=1; /* temporary carry... */
+ for (c=clsu; c<maxC; c++) {
+ add=DECDPUNMAX+add-*c;
+ if (add<=DECDPUNMAX) {
+ *c=(Unit)add;
+ add=0;
+ }
+ else {
+ *c=0;
+ add=1;
+ }
+ }
+ /* add an extra unit iff it would be non-zero */
+ #if DECTRACE
+ printf("UAS borrow: add %ld, carry %ld\n", add, carry);
+ #endif
+ if ((add-carry-1)!=0) {
+ *c=(Unit)(add-carry-1);
+ c++; /* interesting, include it */
+ }
+ return clsu-c; /* -ve result indicates borrowed */
+ } /* decUnitAddSub */
+
+/* ------------------------------------------------------------------ */
+/* decTrim -- trim trailing zeros or normalize */
+/* */
+/* dn is the number to trim or normalize */
+/* set is the context to use to check for clamp */
+/* all is 1 to remove all trailing zeros, 0 for just fraction ones */
+/* dropped returns the number of discarded trailing zeros */
+/* returns dn */
+/* */
+/* If clamp is set in the context then the number of zeros trimmed */
+/* may be limited if the exponent is high. */
+/* All fields are updated as required. This is a utility operation, */
+/* so special values are unchanged and no error is possible. */
+/* ------------------------------------------------------------------ */
+static decNumber * decTrim(decNumber *dn, decContext *set, Flag all,
+ Int *dropped) {
+ Int d, exp; /* work */
+ uInt cut; /* .. */
+ Unit *up; /* -> current Unit */
+
+ #if DECCHECK
+ if (decCheckOperands(dn, DECUNUSED, DECUNUSED, DECUNCONT)) return dn;
+ #endif
+
+ *dropped=0; /* assume no zeros dropped */
+ if ((dn->bits & DECSPECIAL) /* fast exit if special .. */
+ || (*dn->lsu & 0x01)) return dn; /* .. or odd */
+ if (ISZERO(dn)) { /* .. or 0 */
+ dn->exponent=0; /* (sign is preserved) */
+ return dn;
+ }
+
+ /* have a finite number which is even */
+ exp=dn->exponent;
+ cut=1; /* digit (1-DECDPUN) in Unit */
+ up=dn->lsu; /* -> current Unit */
+ for (d=0; d<dn->digits-1; d++) { /* [don't strip the final digit] */
+ /* slice by powers */
+ #if DECDPUN<=4
+ uInt quot=QUOT10(*up, cut);
+ if ((*up-quot*powers[cut])!=0) break; /* found non-0 digit */
+ #else
+ if (*up%powers[cut]!=0) break; /* found non-0 digit */
+ #endif
+ /* have a trailing 0 */
+ if (!all) { /* trimming */
+ /* [if exp>0 then all trailing 0s are significant for trim] */
+ if (exp<=0) { /* if digit might be significant */
+ if (exp==0) break; /* then quit */
+ exp++; /* next digit might be significant */
+ }
+ }
+ cut++; /* next power */
+ if (cut>DECDPUN) { /* need new Unit */
+ up++;
+ cut=1;
+ }
+ } /* d */
+ if (d==0) return dn; /* none to drop */
+
+ /* may need to limit drop if clamping */
+ if (set->clamp) {
+ Int maxd=set->emax-set->digits+1-dn->exponent;
+ if (maxd<=0) return dn; /* nothing possible */
+ if (d>maxd) d=maxd;
+ }
+
+ /* effect the drop */
+ decShiftToLeast(dn->lsu, D2U(dn->digits), d);
+ dn->exponent+=d; /* maintain numerical value */
+ dn->digits-=d; /* new length */
+ *dropped=d; /* report the count */
+ return dn;
+ } /* decTrim */
+
+/* ------------------------------------------------------------------ */
+/* decReverse -- reverse a Unit array in place */
+/* */
+/* ulo is the start of the array */
+/* uhi is the end of the array (highest Unit to include) */
+/* */
+/* The units ulo through uhi are reversed in place (if the number */
+/* of units is odd, the middle one is untouched). Note that the */
+/* digit(s) in each unit are unaffected. */
+/* ------------------------------------------------------------------ */
+static void decReverse(Unit *ulo, Unit *uhi) {
+ Unit temp;
+ for (; ulo<uhi; ulo++, uhi--) {
+ temp=*ulo;
+ *ulo=*uhi;
+ *uhi=temp;
+ }
+ return;
+ } /* decReverse */
+
+/* ------------------------------------------------------------------ */
+/* decShiftToMost -- shift digits in array towards most significant */
+/* */
+/* uar is the array */
+/* digits is the count of digits in use in the array */
+/* shift is the number of zeros to pad with (least significant); */
+/* it must be zero or positive */
+/* */
+/* returns the new length of the integer in the array, in digits */
+/* */
+/* No overflow is permitted (that is, the uar array must be known to */
+/* be large enough to hold the result, after shifting). */
+/* ------------------------------------------------------------------ */
+static Int decShiftToMost(Unit *uar, Int digits, Int shift) {
+ Unit *target, *source, *first; /* work */
+ Int cut; /* odd 0's to add */
+ uInt next; /* work */
+
+ if (shift==0) return digits; /* [fastpath] nothing to do */
+ if ((digits+shift)<=DECDPUN) { /* [fastpath] single-unit case */
+ *uar=(Unit)(*uar*powers[shift]);
+ return digits+shift;
+ }
+
+ next=0; /* all paths */
+ source=uar+D2U(digits)-1; /* where msu comes from */
+ target=source+D2U(shift); /* where upper part of first cut goes */
+ cut=DECDPUN-MSUDIGITS(shift); /* where to slice */
+ if (cut==0) { /* unit-boundary case */
+ for (; source>=uar; source--, target--) *target=*source;
+ }
+ else {
+ first=uar+D2U(digits+shift)-1; /* where msu of source will end up */
+ for (; source>=uar; source--, target--) {
+ /* split the source Unit and accumulate remainder for next */
+ #if DECDPUN<=4
+ uInt quot=QUOT10(*source, cut);
+ uInt rem=*source-quot*powers[cut];
+ next+=quot;
+ #else
+ uInt rem=*source%powers[cut];
+ next+=*source/powers[cut];
+ #endif
+ if (target<=first) *target=(Unit)next; /* write to target iff valid */
+ next=rem*powers[DECDPUN-cut]; /* save remainder for next Unit */
+ }
+ } /* shift-move */
+
+ /* propagate any partial unit to one below and clear the rest */
+ for (; target>=uar; target--) {
+ *target=(Unit)next;
+ next=0;
+ }
+ return digits+shift;
+ } /* decShiftToMost */
+
+/* ------------------------------------------------------------------ */
+/* decShiftToLeast -- shift digits in array towards least significant */
+/* */
+/* uar is the array */
+/* units is length of the array, in units */
+/* shift is the number of digits to remove from the lsu end; it */
+/* must be zero or positive and <= than units*DECDPUN. */
+/* */
+/* returns the new length of the integer in the array, in units */
+/* */
+/* Removed digits are discarded (lost). Units not required to hold */
+/* the final result are unchanged. */
+/* ------------------------------------------------------------------ */
+static Int decShiftToLeast(Unit *uar, Int units, Int shift) {
+ Unit *target, *up; /* work */
+ Int cut, count; /* work */
+ Int quot, rem; /* for division */
+
+ if (shift==0) return units; /* [fastpath] nothing to do */
+ if (shift==units*DECDPUN) { /* [fastpath] little to do */
+ *uar=0; /* all digits cleared gives zero */
+ return 1; /* leaves just the one */
+ }
+
+ target=uar; /* both paths */
+ cut=MSUDIGITS(shift);
+ if (cut==DECDPUN) { /* unit-boundary case; easy */
+ up=uar+D2U(shift);
+ for (; up<uar+units; target++, up++) *target=*up;
+ return target-uar;
+ }
+
+ /* messier */
+ up=uar+D2U(shift-cut); /* source; correct to whole Units */
+ count=units*DECDPUN-shift; /* the maximum new length */
+ #if DECDPUN<=4
+ quot=QUOT10(*up, cut);
+ #else
+ quot=*up/powers[cut];
+ #endif
+ for (; ; target++) {
+ *target=(Unit)quot;
+ count-=(DECDPUN-cut);
+ if (count<=0) break;
+ up++;
+ quot=*up;
+ #if DECDPUN<=4
+ quot=QUOT10(quot, cut);
+ rem=*up-quot*powers[cut];
+ #else
+ rem=quot%powers[cut];
+ quot=quot/powers[cut];
+ #endif
+ *target=(Unit)(*target+rem*powers[DECDPUN-cut]);
+ count-=cut;
+ if (count<=0) break;
+ }
+ return target-uar+1;
+ } /* decShiftToLeast */
+
+#if DECSUBSET
+/* ------------------------------------------------------------------ */
+/* decRoundOperand -- round an operand [used for subset only] */
+/* */
+/* dn is the number to round (dn->digits is > set->digits) */
+/* set is the relevant context */
+/* status is the status accumulator */
+/* */
+/* returns an allocated decNumber with the rounded result. */
+/* */
+/* lostDigits and other status may be set by this. */
+/* */
+/* Since the input is an operand, it must not be modified. */
+/* Instead, return an allocated decNumber, rounded as required. */
+/* It is the caller's responsibility to free the allocated storage. */
+/* */
+/* If no storage is available then the result cannot be used, so NULL */
+/* is returned. */
+/* ------------------------------------------------------------------ */
+static decNumber *decRoundOperand(const decNumber *dn, decContext *set,
+ uInt *status) {
+ decNumber *res; /* result structure */
+ uInt newstatus=0; /* status from round */
+ Int residue=0; /* rounding accumulator */
+
+ /* Allocate storage for the returned decNumber, big enough for the */
+ /* length specified by the context */
+ res=(decNumber *)malloc(sizeof(decNumber)
+ +(D2U(set->digits)-1)*sizeof(Unit));
+ if (res==NULL) {
+ *status|=DEC_Insufficient_storage;
+ return NULL;
+ }
+ decCopyFit(res, dn, set, &residue, &newstatus);
+ decApplyRound(res, set, residue, &newstatus);
+
+ /* If that set Inexact then "lost digits" is raised... */
+ if (newstatus & DEC_Inexact) newstatus|=DEC_Lost_digits;
+ *status|=newstatus;
+ return res;
+ } /* decRoundOperand */
+#endif
+
+/* ------------------------------------------------------------------ */
+/* decCopyFit -- copy a number, truncating the coefficient if needed */
+/* */
+/* dest is the target decNumber */
+/* src is the source decNumber */
+/* set is the context [used for length (digits) and rounding mode] */
+/* residue is the residue accumulator */
+/* status contains the current status to be updated */
+/* */
+/* (dest==src is allowed and will be a no-op if fits) */
+/* All fields are updated as required. */
+/* ------------------------------------------------------------------ */
+static void decCopyFit(decNumber *dest, const decNumber *src,
+ decContext *set, Int *residue, uInt *status) {
+ dest->bits=src->bits;
+ dest->exponent=src->exponent;
+ decSetCoeff(dest, set, src->lsu, src->digits, residue, status);
+ } /* decCopyFit */
+
+/* ------------------------------------------------------------------ */
+/* decSetCoeff -- set the coefficient of a number */
+/* */
+/* dn is the number whose coefficient array is to be set. */
+/* It must have space for set->digits digits */
+/* set is the context [for size] */
+/* lsu -> lsu of the source coefficient [may be dn->lsu] */
+/* len is digits in the source coefficient [may be dn->digits] */
+/* residue is the residue accumulator. This has values as in */
+/* decApplyRound, and will be unchanged unless the */
+/* target size is less than len. In this case, the */
+/* coefficient is truncated and the residue is updated to */
+/* reflect the previous residue and the dropped digits. */
+/* status is the status accumulator, as usual */
+/* */
+/* The coefficient may already be in the number, or it can be an */
+/* external intermediate array. If it is in the number, lsu must == */
+/* dn->lsu and len must == dn->digits. */
+/* */
+/* Note that the coefficient length (len) may be < set->digits, and */
+/* in this case this merely copies the coefficient (or is a no-op */
+/* if dn->lsu==lsu). */
+/* */
+/* Note also that (only internally, from decQuantizeOp and */
+/* decSetSubnormal) the value of set->digits may be less than one, */
+/* indicating a round to left. This routine handles that case */
+/* correctly; caller ensures space. */
+/* */
+/* dn->digits, dn->lsu (and as required), and dn->exponent are */
+/* updated as necessary. dn->bits (sign) is unchanged. */
+/* */
+/* DEC_Rounded status is set if any digits are discarded. */
+/* DEC_Inexact status is set if any non-zero digits are discarded, or */
+/* incoming residue was non-0 (implies rounded) */
+/* ------------------------------------------------------------------ */
+/* mapping array: maps 0-9 to canonical residues, so that a residue */
+/* can be adjusted in the range [-1, +1] and achieve correct rounding */
+/* 0 1 2 3 4 5 6 7 8 9 */
+static const uByte resmap[10]={0, 3, 3, 3, 3, 5, 7, 7, 7, 7};
+static void decSetCoeff(decNumber *dn, decContext *set, const Unit *lsu,
+ Int len, Int *residue, uInt *status) {
+ Int discard; /* number of digits to discard */
+ uInt cut; /* cut point in Unit */
+ const Unit *up; /* work */
+ Unit *target; /* .. */
+ Int count; /* .. */
+ #if DECDPUN<=4
+ uInt temp; /* .. */
+ #endif
+
+ discard=len-set->digits; /* digits to discard */
+ if (discard<=0) { /* no digits are being discarded */
+ if (dn->lsu!=lsu) { /* copy needed */
+ /* copy the coefficient array to the result number; no shift needed */
+ count=len; /* avoids D2U */
+ up=lsu;
+ for (target=dn->lsu; count>0; target++, up++, count-=DECDPUN)
+ *target=*up;
+ dn->digits=len; /* set the new length */
+ }
+ /* dn->exponent and residue are unchanged, record any inexactitude */
+ if (*residue!=0) *status|=(DEC_Inexact | DEC_Rounded);
+ return;
+ }
+
+ /* some digits must be discarded ... */
+ dn->exponent+=discard; /* maintain numerical value */
+ *status|=DEC_Rounded; /* accumulate Rounded status */
+ if (*residue>1) *residue=1; /* previous residue now to right, so reduce */
+
+ if (discard>len) { /* everything, +1, is being discarded */
+ /* guard digit is 0 */
+ /* residue is all the number [NB could be all 0s] */
+ if (*residue<=0) { /* not already positive */
+ count=len; /* avoids D2U */
+ for (up=lsu; count>0; up++, count-=DECDPUN) if (*up!=0) { /* found non-0 */
+ *residue=1;
+ break; /* no need to check any others */
+ }
+ }
+ if (*residue!=0) *status|=DEC_Inexact; /* record inexactitude */
+ *dn->lsu=0; /* coefficient will now be 0 */
+ dn->digits=1; /* .. */
+ return;
+ } /* total discard */
+
+ /* partial discard [most common case] */
+ /* here, at least the first (most significant) discarded digit exists */
+
+ /* spin up the number, noting residue during the spin, until get to */
+ /* the Unit with the first discarded digit. When reach it, extract */
+ /* it and remember its position */
+ count=0;
+ for (up=lsu;; up++) {
+ count+=DECDPUN;
+ if (count>=discard) break; /* full ones all checked */
+ if (*up!=0) *residue=1;
+ } /* up */
+
+ /* here up -> Unit with first discarded digit */
+ cut=discard-(count-DECDPUN)-1;
+ if (cut==DECDPUN-1) { /* unit-boundary case (fast) */
+ Unit half=(Unit)powers[DECDPUN]>>1;
+ /* set residue directly */
+ if (*up>=half) {
+ if (*up>half) *residue=7;
+ else *residue+=5; /* add sticky bit */
+ }
+ else { /* <half */
+ if (*up!=0) *residue=3; /* [else is 0, leave as sticky bit] */
+ }
+ if (set->digits<=0) { /* special for Quantize/Subnormal :-( */
+ *dn->lsu=0; /* .. result is 0 */
+ dn->digits=1; /* .. */
+ }
+ else { /* shift to least */
+ count=set->digits; /* now digits to end up with */
+ dn->digits=count; /* set the new length */
+ up++; /* move to next */
+ /* on unit boundary, so shift-down copy loop is simple */
+ for (target=dn->lsu; count>0; target++, up++, count-=DECDPUN)
+ *target=*up;
+ }
+ } /* unit-boundary case */
+
+ else { /* discard digit is in low digit(s), and not top digit */
+ uInt discard1; /* first discarded digit */
+ uInt quot, rem; /* for divisions */
+ if (cut==0) quot=*up; /* is at bottom of unit */
+ else /* cut>0 */ { /* it's not at bottom of unit */
+ #if DECDPUN<=4
+ quot=QUOT10(*up, cut);
+ rem=*up-quot*powers[cut];
+ #else
+ rem=*up%powers[cut];
+ quot=*up/powers[cut];
+ #endif
+ if (rem!=0) *residue=1;
+ }
+ /* discard digit is now at bottom of quot */
+ #if DECDPUN<=4
+ temp=(quot*6554)>>16; /* fast /10 */
+ /* Vowels algorithm here not a win (9 instructions) */
+ discard1=quot-X10(temp);
+ quot=temp;
+ #else
+ discard1=quot%10;
+ quot=quot/10;
+ #endif
+ /* here, discard1 is the guard digit, and residue is everything */
+ /* else [use mapping array to accumulate residue safely] */
+ *residue+=resmap[discard1];
+ cut++; /* update cut */
+ /* here: up -> Unit of the array with bottom digit */
+ /* cut is the division point for each Unit */
+ /* quot holds the uncut high-order digits for the current unit */
+ if (set->digits<=0) { /* special for Quantize/Subnormal :-( */
+ *dn->lsu=0; /* .. result is 0 */
+ dn->digits=1; /* .. */
+ }
+ else { /* shift to least needed */
+ count=set->digits; /* now digits to end up with */
+ dn->digits=count; /* set the new length */
+ /* shift-copy the coefficient array to the result number */
+ for (target=dn->lsu; ; target++) {
+ *target=(Unit)quot;
+ count-=(DECDPUN-cut);
+ if (count<=0) break;
+ up++;
+ quot=*up;
+ #if DECDPUN<=4
+ quot=QUOT10(quot, cut);
+ rem=*up-quot*powers[cut];
+ #else
+ rem=quot%powers[cut];
+ quot=quot/powers[cut];
+ #endif
+ *target=(Unit)(*target+rem*powers[DECDPUN-cut]);
+ count-=cut;
+ if (count<=0) break;
+ } /* shift-copy loop */
+ } /* shift to least */
+ } /* not unit boundary */
+
+ if (*residue!=0) *status|=DEC_Inexact; /* record inexactitude */
+ return;
+ } /* decSetCoeff */
+
+/* ------------------------------------------------------------------ */
+/* decApplyRound -- apply pending rounding to a number */
+/* */
+/* dn is the number, with space for set->digits digits */
+/* set is the context [for size and rounding mode] */
+/* residue indicates pending rounding, being any accumulated */
+/* guard and sticky information. It may be: */
+/* 6-9: rounding digit is >5 */
+/* 5: rounding digit is exactly half-way */
+/* 1-4: rounding digit is <5 and >0 */
+/* 0: the coefficient is exact */
+/* -1: as 1, but the hidden digits are subtractive, that */
+/* is, of the opposite sign to dn. In this case the */
+/* coefficient must be non-0. This case occurs when */
+/* subtracting a small number (which can be reduced to */
+/* a sticky bit); see decAddOp. */
+/* status is the status accumulator, as usual */
+/* */
+/* This routine applies rounding while keeping the length of the */
+/* coefficient constant. The exponent and status are unchanged */
+/* except if: */
+/* */
+/* -- the coefficient was increased and is all nines (in which */
+/* case Overflow could occur, and is handled directly here so */
+/* the caller does not need to re-test for overflow) */
+/* */
+/* -- the coefficient was decreased and becomes all nines (in which */
+/* case Underflow could occur, and is also handled directly). */
+/* */
+/* All fields in dn are updated as required. */
+/* */
+/* ------------------------------------------------------------------ */
+static void decApplyRound(decNumber *dn, decContext *set, Int residue,
+ uInt *status) {
+ Int bump; /* 1 if coefficient needs to be incremented */
+ /* -1 if coefficient needs to be decremented */
+
+ if (residue==0) return; /* nothing to apply */
+
+ bump=0; /* assume a smooth ride */
+
+ /* now decide whether, and how, to round, depending on mode */
+ switch (set->round) {
+ case DEC_ROUND_05UP: { /* round zero or five up (for reround) */
+ /* This is the same as DEC_ROUND_DOWN unless there is a */
+ /* positive residue and the lsd of dn is 0 or 5, in which case */
+ /* it is bumped; when residue is <0, the number is therefore */
+ /* bumped down unless the final digit was 1 or 6 (in which */
+ /* case it is bumped down and then up -- a no-op) */
+ Int lsd5=*dn->lsu%5; /* get lsd and quintate */
+ if (residue<0 && lsd5!=1) bump=-1;
+ else if (residue>0 && lsd5==0) bump=1;
+ /* [bump==1 could be applied directly; use common path for clarity] */
+ break;} /* r-05 */
+
+ case DEC_ROUND_DOWN: {
+ /* no change, except if negative residue */
+ if (residue<0) bump=-1;
+ break;} /* r-d */
+
+ case DEC_ROUND_HALF_DOWN: {
+ if (residue>5) bump=1;
+ break;} /* r-h-d */
+
+ case DEC_ROUND_HALF_EVEN: {
+ if (residue>5) bump=1; /* >0.5 goes up */
+ else if (residue==5) { /* exactly 0.5000... */
+ /* 0.5 goes up iff [new] lsd is odd */
+ if (*dn->lsu & 0x01) bump=1;
+ }
+ break;} /* r-h-e */
+
+ case DEC_ROUND_HALF_UP: {
+ if (residue>=5) bump=1;
+ break;} /* r-h-u */
+
+ case DEC_ROUND_UP: {
+ if (residue>0) bump=1;
+ break;} /* r-u */
+
+ case DEC_ROUND_CEILING: {
+ /* same as _UP for positive numbers, and as _DOWN for negatives */
+ /* [negative residue cannot occur on 0] */
+ if (decNumberIsNegative(dn)) {
+ if (residue<0) bump=-1;
+ }
+ else {
+ if (residue>0) bump=1;
+ }
+ break;} /* r-c */
+
+ case DEC_ROUND_FLOOR: {
+ /* same as _UP for negative numbers, and as _DOWN for positive */
+ /* [negative residue cannot occur on 0] */
+ if (!decNumberIsNegative(dn)) {
+ if (residue<0) bump=-1;
+ }
+ else {
+ if (residue>0) bump=1;
+ }
+ break;} /* r-f */
+
+ default: { /* e.g., DEC_ROUND_MAX */
+ *status|=DEC_Invalid_context;
+ #if DECTRACE || (DECCHECK && DECVERB)
+ printf("Unknown rounding mode: %d\n", set->round);
+ #endif
+ break;}
+ } /* switch */
+
+ /* now bump the number, up or down, if need be */
+ if (bump==0) return; /* no action required */
+
+ /* Simply use decUnitAddSub unless bumping up and the number is */
+ /* all nines. In this special case set to 100... explicitly */
+ /* and adjust the exponent by one (as otherwise could overflow */
+ /* the array) */
+ /* Similarly handle all-nines result if bumping down. */
+ if (bump>0) {
+ Unit *up; /* work */
+ uInt count=dn->digits; /* digits to be checked */
+ for (up=dn->lsu; ; up++) {
+ if (count<=DECDPUN) {
+ /* this is the last Unit (the msu) */
+ if (*up!=powers[count]-1) break; /* not still 9s */
+ /* here if it, too, is all nines */
+ *up=(Unit)powers[count-1]; /* here 999 -> 100 etc. */
+ for (up=up-1; up>=dn->lsu; up--) *up=0; /* others all to 0 */
+ dn->exponent++; /* and bump exponent */
+ /* [which, very rarely, could cause Overflow...] */
+ if ((dn->exponent+dn->digits)>set->emax+1) {
+ decSetOverflow(dn, set, status);
+ }
+ return; /* done */
+ }
+ /* a full unit to check, with more to come */
+ if (*up!=DECDPUNMAX) break; /* not still 9s */
+ count-=DECDPUN;
+ } /* up */
+ } /* bump>0 */
+ else { /* -1 */
+ /* here checking for a pre-bump of 1000... (leading 1, all */
+ /* other digits zero) */
+ Unit *up, *sup; /* work */
+ uInt count=dn->digits; /* digits to be checked */
+ for (up=dn->lsu; ; up++) {
+ if (count<=DECDPUN) {
+ /* this is the last Unit (the msu) */
+ if (*up!=powers[count-1]) break; /* not 100.. */
+ /* here if have the 1000... case */
+ sup=up; /* save msu pointer */
+ *up=(Unit)powers[count]-1; /* here 100 in msu -> 999 */
+ /* others all to all-nines, too */
+ for (up=up-1; up>=dn->lsu; up--) *up=(Unit)powers[DECDPUN]-1;
+ dn->exponent--; /* and bump exponent */
+
+ /* iff the number was at the subnormal boundary (exponent=etiny) */
+ /* then the exponent is now out of range, so it will in fact get */
+ /* clamped to etiny and the final 9 dropped. */
+ /* printf(">> emin=%d exp=%d sdig=%d\n", set->emin, */
+ /* dn->exponent, set->digits); */
+ if (dn->exponent+1==set->emin-set->digits+1) {
+ if (count==1 && dn->digits==1) *sup=0; /* here 9 -> 0[.9] */
+ else {
+ *sup=(Unit)powers[count-1]-1; /* here 999.. in msu -> 99.. */
+ dn->digits--;
+ }
+ dn->exponent++;
+ *status|=DEC_Underflow | DEC_Subnormal | DEC_Inexact | DEC_Rounded;
+ }
+ return; /* done */
+ }
+
+ /* a full unit to check, with more to come */
+ if (*up!=0) break; /* not still 0s */
+ count-=DECDPUN;
+ } /* up */
+
+ } /* bump<0 */
+
+ /* Actual bump needed. Do it. */
+ decUnitAddSub(dn->lsu, D2U(dn->digits), uarrone, 1, 0, dn->lsu, bump);
+ } /* decApplyRound */
+
+#if DECSUBSET
+/* ------------------------------------------------------------------ */
+/* decFinish -- finish processing a number */
+/* */
+/* dn is the number */
+/* set is the context */
+/* residue is the rounding accumulator (as in decApplyRound) */
+/* status is the accumulator */
+/* */
+/* This finishes off the current number by: */
+/* 1. If not extended: */
+/* a. Converting a zero result to clean '0' */
+/* b. Reducing positive exponents to 0, if would fit in digits */
+/* 2. Checking for overflow and subnormals (always) */
+/* Note this is just Finalize when no subset arithmetic. */
+/* All fields are updated as required. */
+/* ------------------------------------------------------------------ */
+static void decFinish(decNumber *dn, decContext *set, Int *residue,
+ uInt *status) {
+ if (!set->extended) {
+ if ISZERO(dn) { /* value is zero */
+ dn->exponent=0; /* clean exponent .. */
+ dn->bits=0; /* .. and sign */
+ return; /* no error possible */
+ }
+ if (dn->exponent>=0) { /* non-negative exponent */
+ /* >0; reduce to integer if possible */
+ if (set->digits >= (dn->exponent+dn->digits)) {
+ dn->digits=decShiftToMost(dn->lsu, dn->digits, dn->exponent);
+ dn->exponent=0;
+ }
+ }
+ } /* !extended */
+
+ decFinalize(dn, set, residue, status);
+ } /* decFinish */
+#endif
+
+/* ------------------------------------------------------------------ */
+/* decFinalize -- final check, clamp, and round of a number */
+/* */
+/* dn is the number */
+/* set is the context */
+/* residue is the rounding accumulator (as in decApplyRound) */
+/* status is the status accumulator */
+/* */
+/* This finishes off the current number by checking for subnormal */
+/* results, applying any pending rounding, checking for overflow, */
+/* and applying any clamping. */
+/* Underflow and overflow conditions are raised as appropriate. */
+/* All fields are updated as required. */
+/* ------------------------------------------------------------------ */
+static void decFinalize(decNumber *dn, decContext *set, Int *residue,
+ uInt *status) {
+ Int shift; /* shift needed if clamping */
+ Int tinyexp=set->emin-dn->digits+1; /* precalculate subnormal boundary */
+
+ /* Must be careful, here, when checking the exponent as the */
+ /* adjusted exponent could overflow 31 bits [because it may already */
+ /* be up to twice the expected]. */
+
+ /* First test for subnormal. This must be done before any final */
+ /* round as the result could be rounded to Nmin or 0. */
+ if (dn->exponent<=tinyexp) { /* prefilter */
+ Int comp;
+ decNumber nmin;
+ /* A very nasty case here is dn == Nmin and residue<0 */
+ if (dn->exponent<tinyexp) {
+ /* Go handle subnormals; this will apply round if needed. */
+ decSetSubnormal(dn, set, residue, status);
+ return;
+ }
+ /* Equals case: only subnormal if dn=Nmin and negative residue */
+ decNumberZero(&nmin);
+ nmin.lsu[0]=1;
+ nmin.exponent=set->emin;
+ comp=decCompare(dn, &nmin, 1); /* (signless compare) */
+ if (comp==BADINT) { /* oops */
+ *status|=DEC_Insufficient_storage; /* abandon... */
+ return;
+ }
+ if (*residue<0 && comp==0) { /* neg residue and dn==Nmin */
+ decApplyRound(dn, set, *residue, status); /* might force down */
+ decSetSubnormal(dn, set, residue, status);
+ return;
+ }
+ }
+
+ /* now apply any pending round (this could raise overflow). */
+ if (*residue!=0) decApplyRound(dn, set, *residue, status);
+
+ /* Check for overflow [redundant in the 'rare' case] or clamp */
+ if (dn->exponent<=set->emax-set->digits+1) return; /* neither needed */
+
+
+ /* here when might have an overflow or clamp to do */
+ if (dn->exponent>set->emax-dn->digits+1) { /* too big */
+ decSetOverflow(dn, set, status);
+ return;
+ }
+ /* here when the result is normal but in clamp range */
+ if (!set->clamp) return;
+
+ /* here when need to apply the IEEE exponent clamp (fold-down) */
+ shift=dn->exponent-(set->emax-set->digits+1);
+
+ /* shift coefficient (if non-zero) */
+ if (!ISZERO(dn)) {
+ dn->digits=decShiftToMost(dn->lsu, dn->digits, shift);
+ }
+ dn->exponent-=shift; /* adjust the exponent to match */
+ *status|=DEC_Clamped; /* and record the dirty deed */
+ return;
+ } /* decFinalize */
+
+/* ------------------------------------------------------------------ */
+/* decSetOverflow -- set number to proper overflow value */
+/* */
+/* dn is the number (used for sign [only] and result) */
+/* set is the context [used for the rounding mode, etc.] */
+/* status contains the current status to be updated */
+/* */
+/* This sets the sign of a number and sets its value to either */
+/* Infinity or the maximum finite value, depending on the sign of */
+/* dn and the rounding mode, following IEEE 854 rules. */
+/* ------------------------------------------------------------------ */
+static void decSetOverflow(decNumber *dn, decContext *set, uInt *status) {
+ Flag needmax=0; /* result is maximum finite value */
+ uByte sign=dn->bits&DECNEG; /* clean and save sign bit */
+
+ if (ISZERO(dn)) { /* zero does not overflow magnitude */
+ Int emax=set->emax; /* limit value */
+ if (set->clamp) emax-=set->digits-1; /* lower if clamping */
+ if (dn->exponent>emax) { /* clamp required */
+ dn->exponent=emax;
+ *status|=DEC_Clamped;
+ }
+ return;
+ }
+
+ decNumberZero(dn);
+ switch (set->round) {
+ case DEC_ROUND_DOWN: {
+ needmax=1; /* never Infinity */
+ break;} /* r-d */
+ case DEC_ROUND_05UP: {
+ needmax=1; /* never Infinity */
+ break;} /* r-05 */
+ case DEC_ROUND_CEILING: {
+ if (sign) needmax=1; /* Infinity if non-negative */
+ break;} /* r-c */
+ case DEC_ROUND_FLOOR: {
+ if (!sign) needmax=1; /* Infinity if negative */
+ break;} /* r-f */
+ default: break; /* Infinity in all other cases */
+ }
+ if (needmax) {
+ decSetMaxValue(dn, set);
+ dn->bits=sign; /* set sign */
+ }
+ else dn->bits=sign|DECINF; /* Value is +/-Infinity */
+ *status|=DEC_Overflow | DEC_Inexact | DEC_Rounded;
+ } /* decSetOverflow */
+
+/* ------------------------------------------------------------------ */
+/* decSetMaxValue -- set number to +Nmax (maximum normal value) */
+/* */
+/* dn is the number to set */
+/* set is the context [used for digits and emax] */
+/* */
+/* This sets the number to the maximum positive value. */
+/* ------------------------------------------------------------------ */
+static void decSetMaxValue(decNumber *dn, decContext *set) {
+ Unit *up; /* work */
+ Int count=set->digits; /* nines to add */
+ dn->digits=count;
+ /* fill in all nines to set maximum value */
+ for (up=dn->lsu; ; up++) {
+ if (count>DECDPUN) *up=DECDPUNMAX; /* unit full o'nines */
+ else { /* this is the msu */
+ *up=(Unit)(powers[count]-1);
+ break;
+ }
+ count-=DECDPUN; /* filled those digits */
+ } /* up */
+ dn->bits=0; /* + sign */
+ dn->exponent=set->emax-set->digits+1;
+ } /* decSetMaxValue */
+
+/* ------------------------------------------------------------------ */
+/* decSetSubnormal -- process value whose exponent is <Emin */
+/* */
+/* dn is the number (used as input as well as output; it may have */
+/* an allowed subnormal value, which may need to be rounded) */
+/* set is the context [used for the rounding mode] */
+/* residue is any pending residue */
+/* status contains the current status to be updated */
+/* */
+/* If subset mode, set result to zero and set Underflow flags. */
+/* */
+/* Value may be zero with a low exponent; this does not set Subnormal */
+/* but the exponent will be clamped to Etiny. */
+/* */
+/* Otherwise ensure exponent is not out of range, and round as */
+/* necessary. Underflow is set if the result is Inexact. */
+/* ------------------------------------------------------------------ */
+static void decSetSubnormal(decNumber *dn, decContext *set, Int *residue,
+ uInt *status) {
+ Int dnexp; /* saves original exponent */
+ decContext workset; /* work */
+ Int etiny, adjust; /* .. */
+
+ #if DECSUBSET
+ /* simple set to zero and 'hard underflow' for subset */
+ if (!set->extended) {
+ decNumberZero(dn);
+ /* always full overflow */
+ *status|=DEC_Underflow | DEC_Subnormal | DEC_Inexact | DEC_Rounded;
+ return;
+ }
+ #endif
+
+ /* Full arithmetic -- allow subnormals, rounded to minimum exponent */
+ /* (Etiny) if needed */
+ etiny=set->emin-(set->digits-1); /* smallest allowed exponent */
+
+ if ISZERO(dn) { /* value is zero */
+ /* residue can never be non-zero here */
+ #if DECCHECK
+ if (*residue!=0) {
+ printf("++ Subnormal 0 residue %ld\n", (LI)*residue);
+ *status|=DEC_Invalid_operation;
+ }
+ #endif
+ if (dn->exponent<etiny) { /* clamp required */
+ dn->exponent=etiny;
+ *status|=DEC_Clamped;
+ }
+ return;
+ }
+
+ *status|=DEC_Subnormal; /* have a non-zero subnormal */
+ adjust=etiny-dn->exponent; /* calculate digits to remove */
+ if (adjust<=0) { /* not out of range; unrounded */
+ /* residue can never be non-zero here, except in the Nmin-residue */
+ /* case (which is a subnormal result), so can take fast-path here */
+ /* it may already be inexact (from setting the coefficient) */
+ if (*status&DEC_Inexact) *status|=DEC_Underflow;
+ return;
+ }
+
+ /* adjust>0, so need to rescale the result so exponent becomes Etiny */
+ /* [this code is similar to that in rescale] */
+ dnexp=dn->exponent; /* save exponent */
+ workset=*set; /* clone rounding, etc. */
+ workset.digits=dn->digits-adjust; /* set requested length */
+ workset.emin-=adjust; /* and adjust emin to match */
+ /* [note that the latter can be <1, here, similar to Rescale case] */
+ decSetCoeff(dn, &workset, dn->lsu, dn->digits, residue, status);
+ decApplyRound(dn, &workset, *residue, status);
+
+ /* Use 754R/854 default rule: Underflow is set iff Inexact */
+ /* [independent of whether trapped] */
+ if (*status&DEC_Inexact) *status|=DEC_Underflow;
+
+ /* if rounded up a 999s case, exponent will be off by one; adjust */
+ /* back if so [it will fit, because it was shortened earlier] */
+ if (dn->exponent>etiny) {
+ dn->digits=decShiftToMost(dn->lsu, dn->digits, 1);
+ dn->exponent--; /* (re)adjust the exponent. */
+ }
+
+ /* if rounded to zero, it is by definition clamped... */
+ if (ISZERO(dn)) *status|=DEC_Clamped;
+ } /* decSetSubnormal */
+
+/* ------------------------------------------------------------------ */
+/* decCheckMath - check entry conditions for a math function */
+/* */
+/* This checks the context and the operand */
+/* */
+/* rhs is the operand to check */
+/* set is the context to check */
+/* status is unchanged if both are good */
+/* */
+/* returns non-zero if status is changed, 0 otherwise */
+/* */
+/* Restrictions enforced: */
+/* */
+/* digits, emax, and -emin in the context must be less than */
+/* DEC_MAX_MATH (999999), and A must be within these bounds if */
+/* non-zero. Invalid_operation is set in the status if a */
+/* restriction is violated. */
+/* ------------------------------------------------------------------ */
+static uInt decCheckMath(const decNumber *rhs, decContext *set,
+ uInt *status) {
+ uInt save=*status; /* record */
+ if (set->digits>DEC_MAX_MATH
+ || set->emax>DEC_MAX_MATH
+ || -set->emin>DEC_MAX_MATH) *status|=DEC_Invalid_context;
+ else if ((rhs->digits>DEC_MAX_MATH
+ || rhs->exponent+rhs->digits>DEC_MAX_MATH+1
+ || rhs->exponent+rhs->digits<2*(1-DEC_MAX_MATH))
+ && !ISZERO(rhs)) *status|=DEC_Invalid_operation;
+ return (*status!=save);
+ } /* decCheckMath */
+
+/* ------------------------------------------------------------------ */
+/* decGetInt -- get integer from a number */
+/* */
+/* dn is the number [which will not be altered] */
+/* */
+/* returns one of: */
+/* BADINT if there is a non-zero fraction */
+/* the converted integer */
+/* BIGEVEN if the integer is even and magnitude > 2*10**9 */
+/* BIGODD if the integer is odd and magnitude > 2*10**9 */
+/* */
+/* This checks and gets a whole number from the input decNumber. */
+/* The sign can be determined from dn by the caller when BIGEVEN or */
+/* BIGODD is returned. */
+/* ------------------------------------------------------------------ */
+static Int decGetInt(const decNumber *dn) {
+ Int theInt; /* result accumulator */
+ const Unit *up; /* work */
+ Int got; /* digits (real or not) processed */
+ Int ilength=dn->digits+dn->exponent; /* integral length */
+ Flag neg=decNumberIsNegative(dn); /* 1 if -ve */
+
+ /* The number must be an integer that fits in 10 digits */
+ /* Assert, here, that 10 is enough for any rescale Etiny */
+ #if DEC_MAX_EMAX > 999999999
+ #error GetInt may need updating [for Emax]
+ #endif
+ #if DEC_MIN_EMIN < -999999999
+ #error GetInt may need updating [for Emin]
+ #endif
+ if (ISZERO(dn)) return 0; /* zeros are OK, with any exponent */
+
+ up=dn->lsu; /* ready for lsu */
+ theInt=0; /* ready to accumulate */
+ if (dn->exponent>=0) { /* relatively easy */
+ /* no fractional part [usual]; allow for positive exponent */
+ got=dn->exponent;
+ }
+ else { /* -ve exponent; some fractional part to check and discard */
+ Int count=-dn->exponent; /* digits to discard */
+ /* spin up whole units until reach the Unit with the unit digit */
+ for (; count>=DECDPUN; up++) {
+ if (*up!=0) return BADINT; /* non-zero Unit to discard */
+ count-=DECDPUN;
+ }
+ if (count==0) got=0; /* [a multiple of DECDPUN] */
+ else { /* [not multiple of DECDPUN] */
+ Int rem; /* work */
+ /* slice off fraction digits and check for non-zero */
+ #if DECDPUN<=4
+ theInt=QUOT10(*up, count);
+ rem=*up-theInt*powers[count];
+ #else
+ rem=*up%powers[count]; /* slice off discards */
+ theInt=*up/powers[count];
+ #endif
+ if (rem!=0) return BADINT; /* non-zero fraction */
+ /* it looks good */
+ got=DECDPUN-count; /* number of digits so far */
+ up++; /* ready for next */
+ }
+ }
+ /* now it's known there's no fractional part */
+
+ /* tricky code now, to accumulate up to 9.3 digits */
+ if (got==0) {theInt=*up; got+=DECDPUN; up++;} /* ensure lsu is there */
+
+ if (ilength<11) {
+ Int save=theInt;
+ /* collect any remaining unit(s) */
+ for (; got<ilength; up++) {
+ theInt+=*up*powers[got];
+ got+=DECDPUN;
+ }
+ if (ilength==10) { /* need to check for wrap */
+ if (theInt/(Int)powers[got-DECDPUN]!=(Int)*(up-1)) ilength=11;
+ /* [that test also disallows the BADINT result case] */
+ else if (neg && theInt>1999999997) ilength=11;
+ else if (!neg && theInt>999999999) ilength=11;
+ if (ilength==11) theInt=save; /* restore correct low bit */
+ }
+ }
+
+ if (ilength>10) { /* too big */
+ if (theInt&1) return BIGODD; /* bottom bit 1 */
+ return BIGEVEN; /* bottom bit 0 */
+ }
+
+ if (neg) theInt=-theInt; /* apply sign */
+ return theInt;
+ } /* decGetInt */
+
+/* ------------------------------------------------------------------ */
+/* decDecap -- decapitate the coefficient of a number */
+/* */
+/* dn is the number to be decapitated */
+/* drop is the number of digits to be removed from the left of dn; */
+/* this must be <= dn->digits (if equal, the coefficient is */
+/* set to 0) */
+/* */
+/* Returns dn; dn->digits will be <= the initial digits less drop */
+/* (after removing drop digits there may be leading zero digits */
+/* which will also be removed). Only dn->lsu and dn->digits change. */
+/* ------------------------------------------------------------------ */
+static decNumber *decDecap(decNumber *dn, Int drop) {
+ Unit *msu; /* -> target cut point */
+ Int cut; /* work */
+ if (drop>=dn->digits) { /* losing the whole thing */
+ #if DECCHECK
+ if (drop>dn->digits)
+ printf("decDecap called with drop>digits [%ld>%ld]\n",
+ (LI)drop, (LI)dn->digits);
+ #endif
+ dn->lsu[0]=0;
+ dn->digits=1;
+ return dn;
+ }
+ msu=dn->lsu+D2U(dn->digits-drop)-1; /* -> likely msu */
+ cut=MSUDIGITS(dn->digits-drop); /* digits to be in use in msu */
+ if (cut!=DECDPUN) *msu%=powers[cut]; /* clear left digits */
+ /* that may have left leading zero digits, so do a proper count... */
+ dn->digits=decGetDigits(dn->lsu, msu-dn->lsu+1);
+ return dn;
+ } /* decDecap */
+
+/* ------------------------------------------------------------------ */
+/* decBiStr -- compare string with pairwise options */
+/* */
+/* targ is the string to compare */
+/* str1 is one of the strings to compare against (length may be 0) */
+/* str2 is the other; it must be the same length as str1 */
+/* */
+/* returns 1 if strings compare equal, (that is, it is the same */
+/* length as str1 and str2, and each character of targ is in either */
+/* str1 or str2 in the corresponding position), or 0 otherwise */
+/* */
+/* This is used for generic caseless compare, including the awkward */
+/* case of the Turkish dotted and dotless Is. Use as (for example): */
+/* if (decBiStr(test, "mike", "MIKE")) ... */
+/* ------------------------------------------------------------------ */
+static Flag decBiStr(const char *targ, const char *str1, const char *str2) {
+ for (;;targ++, str1++, str2++) {
+ if (*targ!=*str1 && *targ!=*str2) return 0;
+ /* *targ has a match in one (or both, if terminator) */
+ if (*targ=='\0') break;
+ } /* forever */
+ return 1;
+ } /* decBiStr */
+
+/* ------------------------------------------------------------------ */
+/* decNaNs -- handle NaN operand or operands */
+/* */
+/* res is the result number */
+/* lhs is the first operand */
+/* rhs is the second operand, or NULL if none */
+/* context is used to limit payload length */
+/* status contains the current status */
+/* returns res in case convenient */
+/* */
+/* Called when one or both operands is a NaN, and propagates the */
+/* appropriate result to res. When an sNaN is found, it is changed */
+/* to a qNaN and Invalid operation is set. */
+/* ------------------------------------------------------------------ */
+static decNumber * decNaNs(decNumber *res, const decNumber *lhs,
+ const decNumber *rhs, decContext *set,
+ uInt *status) {
+ /* This decision tree ends up with LHS being the source pointer, */
+ /* and status updated if need be */
+ if (lhs->bits & DECSNAN)
+ *status|=DEC_Invalid_operation | DEC_sNaN;
+ else if (rhs==NULL);
+ else if (rhs->bits & DECSNAN) {
+ lhs=rhs;
+ *status|=DEC_Invalid_operation | DEC_sNaN;
+ }
+ else if (lhs->bits & DECNAN);
+ else lhs=rhs;
+
+ /* propagate the payload */
+ if (lhs->digits<=set->digits) decNumberCopy(res, lhs); /* easy */
+ else { /* too long */
+ const Unit *ul;
+ Unit *ur, *uresp1;
+ /* copy safe number of units, then decapitate */
+ res->bits=lhs->bits; /* need sign etc. */
+ uresp1=res->lsu+D2U(set->digits);
+ for (ur=res->lsu, ul=lhs->lsu; ur<uresp1; ur++, ul++) *ur=*ul;
+ res->digits=D2U(set->digits)*DECDPUN;
+ /* maybe still too long */
+ if (res->digits>set->digits) decDecap(res, res->digits-set->digits);
+ }
+
+ res->bits&=~DECSNAN; /* convert any sNaN to NaN, while */
+ res->bits|=DECNAN; /* .. preserving sign */
+ res->exponent=0; /* clean exponent */
+ /* [coefficient was copied/decapitated] */
+ return res;
+ } /* decNaNs */
+
+/* ------------------------------------------------------------------ */
+/* decStatus -- apply non-zero status */
+/* */
+/* dn is the number to set if error */
+/* status contains the current status (not yet in context) */
+/* set is the context */
+/* */
+/* If the status is an error status, the number is set to a NaN, */
+/* unless the error was an overflow, divide-by-zero, or underflow, */
+/* in which case the number will have already been set. */
+/* */
+/* The context status is then updated with the new status. Note that */
+/* this may raise a signal, so control may never return from this */
+/* routine (hence resources must be recovered before it is called). */
+/* ------------------------------------------------------------------ */
+static void decStatus(decNumber *dn, uInt status, decContext *set) {
+ if (status & DEC_NaNs) { /* error status -> NaN */
+ /* if cause was an sNaN, clear and propagate [NaN is already set up] */
+ if (status & DEC_sNaN) status&=~DEC_sNaN;
+ else {
+ decNumberZero(dn); /* other error: clean throughout */
+ dn->bits=DECNAN; /* and make a quiet NaN */
+ }
+ }
+ decContextSetStatus(set, status); /* [may not return] */
+ return;
+ } /* decStatus */
+
+/* ------------------------------------------------------------------ */
+/* decGetDigits -- count digits in a Units array */
+/* */
+/* uar is the Unit array holding the number (this is often an */
+/* accumulator of some sort) */
+/* len is the length of the array in units [>=1] */
+/* */
+/* returns the number of (significant) digits in the array */
+/* */
+/* All leading zeros are excluded, except the last if the array has */
+/* only zero Units. */
+/* ------------------------------------------------------------------ */
+/* This may be called twice during some operations. */
+static Int decGetDigits(Unit *uar, Int len) {
+ Unit *up=uar+(len-1); /* -> msu */
+ Int digits=(len-1)*DECDPUN+1; /* possible digits excluding msu */
+ #if DECDPUN>4
+ uInt const *pow; /* work */
+ #endif
+ /* (at least 1 in final msu) */
+ #if DECCHECK
+ if (len<1) printf("decGetDigits called with len<1 [%ld]\n", (LI)len);
+ #endif
+
+ for (; up>=uar; up--) {
+ if (*up==0) { /* unit is all 0s */
+ if (digits==1) break; /* a zero has one digit */
+ digits-=DECDPUN; /* adjust for 0 unit */
+ continue;}
+ /* found the first (most significant) non-zero Unit */
+ #if DECDPUN>1 /* not done yet */
+ if (*up<10) break; /* is 1-9 */
+ digits++;
+ #if DECDPUN>2 /* not done yet */
+ if (*up<100) break; /* is 10-99 */
+ digits++;
+ #if DECDPUN>3 /* not done yet */
+ if (*up<1000) break; /* is 100-999 */
+ digits++;
+ #if DECDPUN>4 /* count the rest ... */
+ for (pow=&powers[4]; *up>=*pow; pow++) digits++;
+ #endif
+ #endif
+ #endif
+ #endif
+ break;
+ } /* up */
+ return digits;
+ } /* decGetDigits */
+
+#if DECTRACE | DECCHECK
+/* ------------------------------------------------------------------ */
+/* decNumberShow -- display a number [debug aid] */
+/* dn is the number to show */
+/* */
+/* Shows: sign, exponent, coefficient (msu first), digits */
+/* or: sign, special-value */
+/* ------------------------------------------------------------------ */
+/* this is public so other modules can use it */
+void decNumberShow(const decNumber *dn) {
+ const Unit *up; /* work */
+ uInt u, d; /* .. */
+ Int cut; /* .. */
+ char isign='+'; /* main sign */
+ if (dn==NULL) {
+ printf("NULL\n");
+ return;}
+ if (decNumberIsNegative(dn)) isign='-';
+ printf(" >> %c ", isign);
+ if (dn->bits&DECSPECIAL) { /* Is a special value */
+ if (decNumberIsInfinite(dn)) printf("Infinity");
+ else { /* a NaN */
+ if (dn->bits&DECSNAN) printf("sNaN"); /* signalling NaN */
+ else printf("NaN");
+ }
+ /* if coefficient and exponent are 0, no more to do */
+ if (dn->exponent==0 && dn->digits==1 && *dn->lsu==0) {
+ printf("\n");
+ return;}
+ /* drop through to report other information */
+ printf(" ");
+ }
+
+ /* now carefully display the coefficient */
+ up=dn->lsu+D2U(dn->digits)-1; /* msu */
+ printf("%ld", (LI)*up);
+ for (up=up-1; up>=dn->lsu; up--) {
+ u=*up;
+ printf(":");
+ for (cut=DECDPUN-1; cut>=0; cut--) {
+ d=u/powers[cut];
+ u-=d*powers[cut];
+ printf("%ld", (LI)d);
+ } /* cut */
+ } /* up */
+ if (dn->exponent!=0) {
+ char esign='+';
+ if (dn->exponent<0) esign='-';
+ printf(" E%c%ld", esign, (LI)abs(dn->exponent));
+ }
+ printf(" [%ld]\n", (LI)dn->digits);
+ } /* decNumberShow */
+#endif
+
+#if DECTRACE || DECCHECK
+/* ------------------------------------------------------------------ */
+/* decDumpAr -- display a unit array [debug/check aid] */
+/* name is a single-character tag name */
+/* ar is the array to display */
+/* len is the length of the array in Units */
+/* ------------------------------------------------------------------ */
+static void decDumpAr(char name, const Unit *ar, Int len) {
+ Int i;
+ const char *spec;
+ #if DECDPUN==9
+ spec="%09d ";
+ #elif DECDPUN==8
+ spec="%08d ";
+ #elif DECDPUN==7
+ spec="%07d ";
+ #elif DECDPUN==6
+ spec="%06d ";
+ #elif DECDPUN==5
+ spec="%05d ";
+ #elif DECDPUN==4
+ spec="%04d ";
+ #elif DECDPUN==3
+ spec="%03d ";
+ #elif DECDPUN==2
+ spec="%02d ";
+ #else
+ spec="%d ";
+ #endif
+ printf(" :%c: ", name);
+ for (i=len-1; i>=0; i--) {
+ if (i==len-1) printf("%ld ", (LI)ar[i]);
+ else printf(spec, ar[i]);
+ }
+ printf("\n");
+ return;}
+#endif
+
+#if DECCHECK
+/* ------------------------------------------------------------------ */
+/* decCheckOperands -- check operand(s) to a routine */
+/* res is the result structure (not checked; it will be set to */
+/* quiet NaN if error found (and it is not NULL)) */
+/* lhs is the first operand (may be DECUNRESU) */
+/* rhs is the second (may be DECUNUSED) */
+/* set is the context (may be DECUNCONT) */
+/* returns 0 if both operands, and the context are clean, or 1 */
+/* otherwise (in which case the context will show an error, */
+/* unless NULL). Note that res is not cleaned; caller should */
+/* handle this so res=NULL case is safe. */
+/* The caller is expected to abandon immediately if 1 is returned. */
+/* ------------------------------------------------------------------ */
+static Flag decCheckOperands(decNumber *res, const decNumber *lhs,
+ const decNumber *rhs, decContext *set) {
+ Flag bad=0;
+ if (set==NULL) { /* oops; hopeless */
+ #if DECTRACE || DECVERB
+ printf("Reference to context is NULL.\n");
+ #endif
+ bad=1;
+ return 1;}
+ else if (set!=DECUNCONT
+ && (set->digits<1 || set->round>=DEC_ROUND_MAX)) {
+ bad=1;
+ #if DECTRACE || DECVERB
+ printf("Bad context [digits=%ld round=%ld].\n",
+ (LI)set->digits, (LI)set->round);
+ #endif
+ }
+ else {
+ if (res==NULL) {
+ bad=1;
+ #if DECTRACE
+ /* this one not DECVERB as standard tests include NULL */
+ printf("Reference to result is NULL.\n");
+ #endif
+ }
+ if (!bad && lhs!=DECUNUSED) bad=(decCheckNumber(lhs));
+ if (!bad && rhs!=DECUNUSED) bad=(decCheckNumber(rhs));
+ }
+ if (bad) {
+ if (set!=DECUNCONT) decContextSetStatus(set, DEC_Invalid_operation);
+ if (res!=DECUNRESU && res!=NULL) {
+ decNumberZero(res);
+ res->bits=DECNAN; /* qNaN */
+ }
+ }
+ return bad;
+ } /* decCheckOperands */
+
+/* ------------------------------------------------------------------ */
+/* decCheckNumber -- check a number */
+/* dn is the number to check */
+/* returns 0 if the number is clean, or 1 otherwise */
+/* */
+/* The number is considered valid if it could be a result from some */
+/* operation in some valid context. */
+/* ------------------------------------------------------------------ */
+static Flag decCheckNumber(const decNumber *dn) {
+ const Unit *up; /* work */
+ uInt maxuint; /* .. */
+ Int ae, d, digits; /* .. */
+ Int emin, emax; /* .. */
+
+ if (dn==NULL) { /* hopeless */
+ #if DECTRACE
+ /* this one not DECVERB as standard tests include NULL */
+ printf("Reference to decNumber is NULL.\n");
+ #endif
+ return 1;}
+
+ /* check special values */
+ if (dn->bits & DECSPECIAL) {
+ if (dn->exponent!=0) {
+ #if DECTRACE || DECVERB
+ printf("Exponent %ld (not 0) for a special value [%02x].\n",
+ (LI)dn->exponent, dn->bits);
+ #endif
+ return 1;}
+
+ /* 2003.09.08: NaNs may now have coefficients, so next tests Inf only */
+ if (decNumberIsInfinite(dn)) {
+ if (dn->digits!=1) {
+ #if DECTRACE || DECVERB
+ printf("Digits %ld (not 1) for an infinity.\n", (LI)dn->digits);
+ #endif
+ return 1;}
+ if (*dn->lsu!=0) {
+ #if DECTRACE || DECVERB
+ printf("LSU %ld (not 0) for an infinity.\n", (LI)*dn->lsu);
+ #endif
+ decDumpAr('I', dn->lsu, D2U(dn->digits));
+ return 1;}
+ } /* Inf */
+ /* 2002.12.26: negative NaNs can now appear through proposed IEEE */
+ /* concrete formats (decimal64, etc.). */
+ return 0;
+ }
+
+ /* check the coefficient */
+ if (dn->digits<1 || dn->digits>DECNUMMAXP) {
+ #if DECTRACE || DECVERB
+ printf("Digits %ld in number.\n", (LI)dn->digits);
+ #endif
+ return 1;}
+
+ d=dn->digits;
+
+ for (up=dn->lsu; d>0; up++) {
+ if (d>DECDPUN) maxuint=DECDPUNMAX;
+ else { /* reached the msu */
+ maxuint=powers[d]-1;
+ if (dn->digits>1 && *up<powers[d-1]) {
+ #if DECTRACE || DECVERB
+ printf("Leading 0 in number.\n");
+ decNumberShow(dn);
+ #endif
+ return 1;}
+ }
+ if (*up>maxuint) {
+ #if DECTRACE || DECVERB
+ printf("Bad Unit [%08lx] in %ld-digit number at offset %ld [maxuint %ld].\n",
+ (LI)*up, (LI)dn->digits, (LI)(up-dn->lsu), (LI)maxuint);
+ #endif
+ return 1;}
+ d-=DECDPUN;
+ }
+
+ /* check the exponent. Note that input operands can have exponents */
+ /* which are out of the set->emin/set->emax and set->digits range */
+ /* (just as they can have more digits than set->digits). */
+ ae=dn->exponent+dn->digits-1; /* adjusted exponent */
+ emax=DECNUMMAXE;
+ emin=DECNUMMINE;
+ digits=DECNUMMAXP;
+ if (ae<emin-(digits-1)) {
+ #if DECTRACE || DECVERB
+ printf("Adjusted exponent underflow [%ld].\n", (LI)ae);
+ decNumberShow(dn);
+ #endif
+ return 1;}
+ if (ae>+emax) {
+ #if DECTRACE || DECVERB
+ printf("Adjusted exponent overflow [%ld].\n", (LI)ae);
+ decNumberShow(dn);
+ #endif
+ return 1;}
+
+ return 0; /* it's OK */
+ } /* decCheckNumber */
+
+/* ------------------------------------------------------------------ */
+/* decCheckInexact -- check a normal finite inexact result has digits */
+/* dn is the number to check */
+/* set is the context (for status and precision) */
+/* sets Invalid operation, etc., if some digits are missing */
+/* [this check is not made for DECSUBSET compilation or when */
+/* subnormal is not set] */
+/* ------------------------------------------------------------------ */
+static void decCheckInexact(const decNumber *dn, decContext *set) {
+ #if !DECSUBSET && DECEXTFLAG
+ if ((set->status & (DEC_Inexact|DEC_Subnormal))==DEC_Inexact
+ && (set->digits!=dn->digits) && !(dn->bits & DECSPECIAL)) {
+ #if DECTRACE || DECVERB
+ printf("Insufficient digits [%ld] on normal Inexact result.\n",
+ (LI)dn->digits);
+ decNumberShow(dn);
+ #endif
+ decContextSetStatus(set, DEC_Invalid_operation);
+ }
+ #else
+ /* next is a noop for quiet compiler */
+ if (dn!=NULL && dn->digits==0) set->status|=DEC_Invalid_operation;
+ #endif
+ return;
+ } /* decCheckInexact */
+#endif
+
+#if DECALLOC
+#undef malloc
+#undef free
+/* ------------------------------------------------------------------ */
+/* decMalloc -- accountable allocation routine */
+/* n is the number of bytes to allocate */
+/* */
+/* Semantics is the same as the stdlib malloc routine, but bytes */
+/* allocated are accounted for globally, and corruption fences are */
+/* added before and after the 'actual' storage. */
+/* ------------------------------------------------------------------ */
+/* This routine allocates storage with an extra twelve bytes; 8 are */
+/* at the start and hold: */
+/* 0-3 the original length requested */
+/* 4-7 buffer corruption detection fence (DECFENCE, x4) */
+/* The 4 bytes at the end also hold a corruption fence (DECFENCE, x4) */
+/* ------------------------------------------------------------------ */
+static void *decMalloc(size_t n) {
+ uInt size=n+12; /* true size */
+ void *alloc; /* -> allocated storage */
+ uInt *j; /* work */
+ uByte *b, *b0; /* .. */
+
+ alloc=malloc(size); /* -> allocated storage */
+ if (alloc==NULL) return NULL; /* out of strorage */
+ b0=(uByte *)alloc; /* as bytes */
+ decAllocBytes+=n; /* account for storage */
+ j=(uInt *)alloc; /* -> first four bytes */
+ *j=n; /* save n */
+ /* printf(" alloc ++ dAB: %ld (%d)\n", decAllocBytes, n); */
+ for (b=b0+4; b<b0+8; b++) *b=DECFENCE;
+ for (b=b0+n+8; b<b0+n+12; b++) *b=DECFENCE;
+ return b0+8; /* -> play area */
+ } /* decMalloc */
+
+/* ------------------------------------------------------------------ */
+/* decFree -- accountable free routine */
+/* alloc is the storage to free */
+/* */
+/* Semantics is the same as the stdlib malloc routine, except that */
+/* the global storage accounting is updated and the fences are */
+/* checked to ensure that no routine has written 'out of bounds'. */
+/* ------------------------------------------------------------------ */
+/* This routine first checks that the fences have not been corrupted. */
+/* It then frees the storage using the 'truw' storage address (that */
+/* is, offset by 8). */
+/* ------------------------------------------------------------------ */
+static void decFree(void *alloc) {
+ uInt *j, n; /* pointer, original length */
+ uByte *b, *b0; /* work */
+
+ if (alloc==NULL) return; /* allowed; it's a nop */
+ b0=(uByte *)alloc; /* as bytes */
+ b0-=8; /* -> true start of storage */
+ j=(uInt *)b0; /* -> first four bytes */
+ n=*j; /* lift */
+ for (b=b0+4; b<b0+8; b++) if (*b!=DECFENCE)
+ printf("=== Corrupt byte [%02x] at offset %d from %ld ===\n", *b,
+ b-b0-8, (Int)b0);
+ for (b=b0+n+8; b<b0+n+12; b++) if (*b!=DECFENCE)
+ printf("=== Corrupt byte [%02x] at offset +%d from %ld, n=%ld ===\n", *b,
+ b-b0-8, (Int)b0, n);
+ free(b0); /* drop the storage */
+ decAllocBytes-=n; /* account for storage */
+ /* printf(" free -- dAB: %d (%d)\n", decAllocBytes, -n); */
+ } /* decFree */
+#define malloc(a) decMalloc(a)
+#define free(a) decFree(a)
+#endif
diff --git a/libdecnumber/decNumber.h b/libdecnumber/decNumber.h
new file mode 100644
index 0000000..0a9fdce
--- /dev/null
+++ b/libdecnumber/decNumber.h
@@ -0,0 +1,200 @@
+/* Decimal number arithmetic module header for the decNumber C Library.
+ Copyright (C) 2005, 2007 Free Software Foundation, Inc.
+ Contributed by IBM Corporation. Author Mike Cowlishaw.
+
+ This file is part of GCC.
+
+ GCC is free software; you can redistribute it and/or modify it under
+ the terms of the GNU General Public License as published by the Free
+ Software Foundation; either version 2, or (at your option) any later
+ version.
+
+ In addition to the permissions in the GNU General Public License,
+ the Free Software Foundation gives you unlimited permission to link
+ the compiled version of this file into combinations with other
+ programs, and to distribute those combinations without any
+ restriction coming from the use of this file. (The General Public
+ License restrictions do apply in other respects; for example, they
+ cover modification of the file, and distribution when not linked
+ into a combine executable.)
+
+ GCC is distributed in the hope that it will be useful, but WITHOUT ANY
+ WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
+ for more details.
+
+ You should have received a copy of the GNU General Public License
+ along with GCC; see the file COPYING. If not, write to the Free
+ Software Foundation, 51 Franklin Street, Fifth Floor, Boston, MA
+ 02110-1301, USA. */
+
+/* ------------------------------------------------------------------ */
+/* Decimal Number arithmetic module header */
+/* ------------------------------------------------------------------ */
+
+#if !defined(DECNUMBER)
+ #define DECNUMBER
+ #define DECNAME "decNumber" /* Short name */
+ #define DECFULLNAME "Decimal Number Module" /* Verbose name */
+ #define DECAUTHOR "Mike Cowlishaw" /* Who to blame */
+
+ #if !defined(DECCONTEXT)
+ #include "decContext.h"
+ #endif
+
+ /* Bit settings for decNumber.bits */
+ #define DECNEG 0x80 /* Sign; 1=negative, 0=positive or zero */
+ #define DECINF 0x40 /* 1=Infinity */
+ #define DECNAN 0x20 /* 1=NaN */
+ #define DECSNAN 0x10 /* 1=sNaN */
+ /* The remaining bits are reserved; they must be 0 */
+ #define DECSPECIAL (DECINF|DECNAN|DECSNAN) /* any special value */
+
+ /* Define the decNumber data structure. The size and shape of the */
+ /* units array in the structure is determined by the following */
+ /* constant. This must not be changed without recompiling the */
+ /* decNumber library modules. */
+
+ #define DECDPUN 3 /* DECimal Digits Per UNit [must be >0 */
+ /* and <10; 3 or powers of 2 are best]. */
+
+ /* DECNUMDIGITS is the default number of digits that can be held in */
+ /* the structure. If undefined, 1 is assumed and it is assumed */
+ /* that the structure will be immediately followed by extra space, */
+ /* as required. DECNUMDIGITS is always >0. */
+ #if !defined(DECNUMDIGITS)
+ #define DECNUMDIGITS 1
+ #endif
+
+ /* The size (integer data type) of each unit is determined by the */
+ /* number of digits it will hold. */
+ #if DECDPUN<=2
+ #define decNumberUnit uint8_t
+ #elif DECDPUN<=4
+ #define decNumberUnit uint16_t
+ #else
+ #define decNumberUnit uint32_t
+ #endif
+ /* The number of units needed is ceil(DECNUMDIGITS/DECDPUN) */
+ #define DECNUMUNITS ((DECNUMDIGITS+DECDPUN-1)/DECDPUN)
+
+ /* The data structure... */
+ typedef struct {
+ int32_t digits; /* Count of digits in the coefficient; >0 */
+ int32_t exponent; /* Unadjusted exponent, unbiased, in */
+ /* range: -1999999997 through 999999999 */
+ uint8_t bits; /* Indicator bits (see above) */
+ /* Coefficient, from least significant unit */
+ decNumberUnit lsu[DECNUMUNITS];
+ } decNumber;
+
+ /* Notes: */
+ /* 1. If digits is > DECDPUN then there will one or more */
+ /* decNumberUnits immediately following the first element of lsu.*/
+ /* These contain the remaining (more significant) digits of the */
+ /* number, and may be in the lsu array, or may be guaranteed by */
+ /* some other mechanism (such as being contained in another */
+ /* structure, or being overlaid on dynamically allocated */
+ /* storage). */
+ /* */
+ /* Each integer of the coefficient (except potentially the last) */
+ /* contains DECDPUN digits (e.g., a value in the range 0 through */
+ /* 99999999 if DECDPUN is 8, or 0 through 999 if DECDPUN is 3). */
+ /* */
+ /* 2. A decNumber converted to a string may need up to digits+14 */
+ /* characters. The worst cases (non-exponential and exponential */
+ /* formats) are -0.00000{9...}# and -9.{9...}E+999999999# */
+ /* (where # is '\0') */
+
+
+ /* ---------------------------------------------------------------- */
+ /* decNumber public functions and macros */
+ /* ---------------------------------------------------------------- */
+
+ #include "decNumberSymbols.h"
+
+ /* Conversions */
+ decNumber * decNumberFromInt32(decNumber *, int32_t);
+ decNumber * decNumberFromUInt32(decNumber *, uint32_t);
+ decNumber * decNumberFromString(decNumber *, const char *, decContext *);
+ char * decNumberToString(const decNumber *, char *);
+ char * decNumberToEngString(const decNumber *, char *);
+ uint32_t decNumberToUInt32(const decNumber *, decContext *);
+ int32_t decNumberToInt32(const decNumber *, decContext *);
+ uint8_t * decNumberGetBCD(const decNumber *, uint8_t *);
+ decNumber * decNumberSetBCD(decNumber *, const uint8_t *, uint32_t);
+
+ /* Operators and elementary functions */
+ decNumber * decNumberAbs(decNumber *, const decNumber *, decContext *);
+ decNumber * decNumberAdd(decNumber *, const decNumber *, const decNumber *, decContext *);
+ decNumber * decNumberAnd(decNumber *, const decNumber *, const decNumber *, decContext *);
+ decNumber * decNumberCompare(decNumber *, const decNumber *, const decNumber *, decContext *);
+ decNumber * decNumberCompareSignal(decNumber *, const decNumber *, const decNumber *, decContext *);
+ decNumber * decNumberCompareTotal(decNumber *, const decNumber *, const decNumber *, decContext *);
+ decNumber * decNumberCompareTotalMag(decNumber *, const decNumber *, const decNumber *, decContext *);
+ decNumber * decNumberDivide(decNumber *, const decNumber *, const decNumber *, decContext *);
+ decNumber * decNumberDivideInteger(decNumber *, const decNumber *, const decNumber *, decContext *);
+ decNumber * decNumberExp(decNumber *, const decNumber *, decContext *);
+ decNumber * decNumberFMA(decNumber *, const decNumber *, const decNumber *, const decNumber *, decContext *);
+ decNumber * decNumberInvert(decNumber *, const decNumber *, decContext *);
+ decNumber * decNumberLn(decNumber *, const decNumber *, decContext *);
+ decNumber * decNumberLogB(decNumber *, const decNumber *, decContext *);
+ decNumber * decNumberLog10(decNumber *, const decNumber *, decContext *);
+ decNumber * decNumberMax(decNumber *, const decNumber *, const decNumber *, decContext *);
+ decNumber * decNumberMaxMag(decNumber *, const decNumber *, const decNumber *, decContext *);
+ decNumber * decNumberMin(decNumber *, const decNumber *, const decNumber *, decContext *);
+ decNumber * decNumberMinMag(decNumber *, const decNumber *, const decNumber *, decContext *);
+ decNumber * decNumberMinus(decNumber *, const decNumber *, decContext *);
+ decNumber * decNumberMultiply(decNumber *, const decNumber *, const decNumber *, decContext *);
+ decNumber * decNumberNormalize(decNumber *, const decNumber *, decContext *);
+ decNumber * decNumberOr(decNumber *, const decNumber *, const decNumber *, decContext *);
+ decNumber * decNumberPlus(decNumber *, const decNumber *, decContext *);
+ decNumber * decNumberPower(decNumber *, const decNumber *, const decNumber *, decContext *);
+ decNumber * decNumberQuantize(decNumber *, const decNumber *, const decNumber *, decContext *);
+ decNumber * decNumberReduce(decNumber *, const decNumber *, decContext *);
+ decNumber * decNumberRemainder(decNumber *, const decNumber *, const decNumber *, decContext *);
+ decNumber * decNumberRemainderNear(decNumber *, const decNumber *, const decNumber *, decContext *);
+ decNumber * decNumberRescale(decNumber *, const decNumber *, const decNumber *, decContext *);
+ decNumber * decNumberRotate(decNumber *, const decNumber *, const decNumber *, decContext *);
+ decNumber * decNumberSameQuantum(decNumber *, const decNumber *, const decNumber *);
+ decNumber * decNumberScaleB(decNumber *, const decNumber *, const decNumber *, decContext *);
+ decNumber * decNumberShift(decNumber *, const decNumber *, const decNumber *, decContext *);
+ decNumber * decNumberSquareRoot(decNumber *, const decNumber *, decContext *);
+ decNumber * decNumberSubtract(decNumber *, const decNumber *, const decNumber *, decContext *);
+ decNumber * decNumberToIntegralExact(decNumber *, const decNumber *, decContext *);
+ decNumber * decNumberToIntegralValue(decNumber *, const decNumber *, decContext *);
+ decNumber * decNumberXor(decNumber *, const decNumber *, const decNumber *, decContext *);
+
+ /* Utilities */
+ enum decClass decNumberClass(const decNumber *, decContext *);
+ const char * decNumberClassToString(enum decClass);
+ decNumber * decNumberCopy(decNumber *, const decNumber *);
+ decNumber * decNumberCopyAbs(decNumber *, const decNumber *);
+ decNumber * decNumberCopyNegate(decNumber *, const decNumber *);
+ decNumber * decNumberCopySign(decNumber *, const decNumber *, const decNumber *);
+ decNumber * decNumberNextMinus(decNumber *, const decNumber *, decContext *);
+ decNumber * decNumberNextPlus(decNumber *, const decNumber *, decContext *);
+ decNumber * decNumberNextToward(decNumber *, const decNumber *, const decNumber *, decContext *);
+ decNumber * decNumberTrim(decNumber *);
+ const char * decNumberVersion(void);
+ decNumber * decNumberZero(decNumber *);
+
+ /* Functions for testing decNumbers (normality depends on context) */
+ int32_t decNumberIsNormal(const decNumber *, decContext *);
+ int32_t decNumberIsSubnormal(const decNumber *, decContext *);
+
+ /* Macros for testing decNumber *dn */
+ #define decNumberIsCanonical(dn) (1) /* All decNumbers are saintly */
+ #define decNumberIsFinite(dn) (((dn)->bits&DECSPECIAL)==0)
+ #define decNumberIsInfinite(dn) (((dn)->bits&DECINF)!=0)
+ #define decNumberIsNaN(dn) (((dn)->bits&(DECNAN|DECSNAN))!=0)
+ #define decNumberIsNegative(dn) (((dn)->bits&DECNEG)!=0)
+ #define decNumberIsQNaN(dn) (((dn)->bits&(DECNAN))!=0)
+ #define decNumberIsSNaN(dn) (((dn)->bits&(DECSNAN))!=0)
+ #define decNumberIsSpecial(dn) (((dn)->bits&DECSPECIAL)!=0)
+ #define decNumberIsZero(dn) (*(dn)->lsu==0 \
+ && (dn)->digits==1 \
+ && (((dn)->bits&DECSPECIAL)==0))
+ #define decNumberRadix(dn) (10)
+
+#endif
diff --git a/libdecnumber/decNumberLocal.h b/libdecnumber/decNumberLocal.h
new file mode 100644
index 0000000..891a084
--- /dev/null
+++ b/libdecnumber/decNumberLocal.h
@@ -0,0 +1,665 @@
+/* Local definitions for the decNumber C Library.
+ Copyright (C) 2007 Free Software Foundation, Inc.
+ Contributed by IBM Corporation. Author Mike Cowlishaw.
+
+ This file is part of GCC.
+
+ GCC is free software; you can redistribute it and/or modify it under
+ the terms of the GNU General Public License as published by the Free
+ Software Foundation; either version 2, or (at your option) any later
+ version.
+
+ In addition to the permissions in the GNU General Public License,
+ the Free Software Foundation gives you unlimited permission to link
+ the compiled version of this file into combinations with other
+ programs, and to distribute those combinations without any
+ restriction coming from the use of this file. (The General Public
+ License restrictions do apply in other respects; for example, they
+ cover modification of the file, and distribution when not linked
+ into a combine executable.)
+
+ GCC is distributed in the hope that it will be useful, but WITHOUT ANY
+ WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
+ for more details.
+
+ You should have received a copy of the GNU General Public License
+ along with GCC; see the file COPYING. If not, write to the Free
+ Software Foundation, 51 Franklin Street, Fifth Floor, Boston, MA
+ 02110-1301, USA. */
+
+/* ------------------------------------------------------------------ */
+/* decNumber package local type, tuning, and macro definitions */
+/* ------------------------------------------------------------------ */
+/* This header file is included by all modules in the decNumber */
+/* library, and contains local type definitions, tuning parameters, */
+/* etc. It should not need to be used by application programs. */
+/* decNumber.h or one of decDouble (etc.) must be included first. */
+/* ------------------------------------------------------------------ */
+
+#if !defined(DECNUMBERLOC)
+ #define DECNUMBERLOC
+ #define DECVERSION "decNumber 3.53" /* Package Version [16 max.] */
+ #define DECNLAUTHOR "Mike Cowlishaw" /* Who to blame */
+
+ #include <stdlib.h> /* for abs */
+ #include <string.h> /* for memset, strcpy */
+ #include "config.h" /* for WORDS_BIGENDIAN */
+
+ /* Conditional code flag -- set this to match hardware platform */
+ /* 1=little-endian, 0=big-endian */
+ #if WORDS_BIGENDIAN
+ #define DECLITEND 0
+ #else
+ #define DECLITEND 1
+ #endif
+
+ /* Conditional code flag -- set this to 1 for best performance */
+ #define DECUSE64 1 /* 1=use int64s, 0=int32 & smaller only */
+
+ /* Conditional check flags -- set these to 0 for best performance */
+ #define DECCHECK 0 /* 1 to enable robust checking */
+ #define DECALLOC 0 /* 1 to enable memory accounting */
+ #define DECTRACE 0 /* 1 to trace certain internals, etc. */
+
+ /* Tuning parameter for decNumber (arbitrary precision) module */
+ #define DECBUFFER 36 /* Size basis for local buffers. This */
+ /* should be a common maximum precision */
+ /* rounded up to a multiple of 4; must */
+ /* be zero or positive. */
+
+ /* ---------------------------------------------------------------- */
+ /* Definitions for all modules (general-purpose) */
+ /* ---------------------------------------------------------------- */
+
+ /* Local names for common types -- for safety, decNumber modules do */
+ /* not use int or long directly. */
+ #define Flag uint8_t
+ #define Byte int8_t
+ #define uByte uint8_t
+ #define Short int16_t
+ #define uShort uint16_t
+ #define Int int32_t
+ #define uInt uint32_t
+ #define Unit decNumberUnit
+ #if DECUSE64
+ #define Long int64_t
+ #define uLong uint64_t
+ #endif
+
+ /* Development-use definitions */
+ typedef long int LI; /* for printf arguments only */
+ #define DECNOINT 0 /* 1 to check no internal use of 'int' */
+ #if DECNOINT
+ /* if these interfere with your C includes, do not set DECNOINT */
+ #define int ? /* enable to ensure that plain C 'int' */
+ #define long ?? /* .. or 'long' types are not used */
+ #endif
+
+ /* Shared lookup tables */
+ extern const uByte DECSTICKYTAB[10]; /* re-round digits if sticky */
+ extern const uInt DECPOWERS[10]; /* powers of ten table */
+ /* The following are included from decDPD.h */
+ extern const uShort DPD2BIN[1024]; /* DPD -> 0-999 */
+ extern const uShort BIN2DPD[1000]; /* 0-999 -> DPD */
+ extern const uInt DPD2BINK[1024]; /* DPD -> 0-999000 */
+ extern const uInt DPD2BINM[1024]; /* DPD -> 0-999000000 */
+ extern const uByte DPD2BCD8[4096]; /* DPD -> ddd + len */
+ extern const uByte BIN2BCD8[4000]; /* 0-999 -> ddd + len */
+ extern const uShort BCD2DPD[2458]; /* 0-0x999 -> DPD (0x999=2457)*/
+
+ /* LONGMUL32HI -- set w=(u*v)>>32, where w, u, and v are uInts */
+ /* (that is, sets w to be the high-order word of the 64-bit result; */
+ /* the low-order word is simply u*v.) */
+ /* This version is derived from Knuth via Hacker's Delight; */
+ /* it seems to optimize better than some others tried */
+ #define LONGMUL32HI(w, u, v) { \
+ uInt u0, u1, v0, v1, w0, w1, w2, t; \
+ u0=u & 0xffff; u1=u>>16; \
+ v0=v & 0xffff; v1=v>>16; \
+ w0=u0*v0; \
+ t=u1*v0 + (w0>>16); \
+ w1=t & 0xffff; w2=t>>16; \
+ w1=u0*v1 + w1; \
+ (w)=u1*v1 + w2 + (w1>>16);}
+
+ /* ROUNDUP -- round an integer up to a multiple of n */
+ #define ROUNDUP(i, n) ((((i)+(n)-1)/n)*n)
+
+ /* ROUNDDOWN -- round an integer down to a multiple of n */
+ #define ROUNDDOWN(i, n) (((i)/n)*n)
+ #define ROUNDDOWN4(i) ((i)&~3) /* special for n=4 */
+
+ /* References to multi-byte sequences under different sizes */
+ /* Refer to a uInt from four bytes starting at a char* or uByte*, */
+ /* etc. */
+ #define UINTAT(b) (*((uInt *)(b)))
+ #define USHORTAT(b) (*((uShort *)(b)))
+ #define UBYTEAT(b) (*((uByte *)(b)))
+
+ /* X10 and X100 -- multiply integer i by 10 or 100 */
+ /* [shifts are usually faster than multiply; could be conditional] */
+ #define X10(i) (((i)<<1)+((i)<<3))
+ #define X100(i) (((i)<<2)+((i)<<5)+((i)<<6))
+
+ /* MAXI and MINI -- general max & min (not in ANSI) for integers */
+ #define MAXI(x,y) ((x)<(y)?(y):(x))
+ #define MINI(x,y) ((x)>(y)?(y):(x))
+
+ /* Useful constants */
+ #define BILLION 1000000000 /* 10**9 */
+ /* CHARMASK: 0x30303030 for ASCII/UTF8; 0xF0F0F0F0 for EBCDIC */
+ #define CHARMASK ((((((((uInt)'0')<<8)+'0')<<8)+'0')<<8)+'0')
+
+
+ /* ---------------------------------------------------------------- */
+ /* Definitions for arbitary-precision modules (only valid after */
+ /* decNumber.h has been included) */
+ /* ---------------------------------------------------------------- */
+
+ /* Limits and constants */
+ #define DECNUMMAXP 999999999 /* maximum precision code can handle */
+ #define DECNUMMAXE 999999999 /* maximum adjusted exponent ditto */
+ #define DECNUMMINE -999999999 /* minimum adjusted exponent ditto */
+ #if (DECNUMMAXP != DEC_MAX_DIGITS)
+ #error Maximum digits mismatch
+ #endif
+ #if (DECNUMMAXE != DEC_MAX_EMAX)
+ #error Maximum exponent mismatch
+ #endif
+ #if (DECNUMMINE != DEC_MIN_EMIN)
+ #error Minimum exponent mismatch
+ #endif
+
+ /* Set DECDPUNMAX -- the maximum integer that fits in DECDPUN */
+ /* digits, and D2UTABLE -- the initializer for the D2U table */
+ #if DECDPUN==1
+ #define DECDPUNMAX 9
+ #define D2UTABLE {0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17, \
+ 18,19,20,21,22,23,24,25,26,27,28,29,30,31,32, \
+ 33,34,35,36,37,38,39,40,41,42,43,44,45,46,47, \
+ 48,49}
+ #elif DECDPUN==2
+ #define DECDPUNMAX 99
+ #define D2UTABLE {0,1,1,2,2,3,3,4,4,5,5,6,6,7,7,8,8,9,9,10,10, \
+ 11,11,12,12,13,13,14,14,15,15,16,16,17,17,18, \
+ 18,19,19,20,20,21,21,22,22,23,23,24,24,25}
+ #elif DECDPUN==3
+ #define DECDPUNMAX 999
+ #define D2UTABLE {0,1,1,1,2,2,2,3,3,3,4,4,4,5,5,5,6,6,6,7,7,7, \
+ 8,8,8,9,9,9,10,10,10,11,11,11,12,12,12,13,13, \
+ 13,14,14,14,15,15,15,16,16,16,17}
+ #elif DECDPUN==4
+ #define DECDPUNMAX 9999
+ #define D2UTABLE {0,1,1,1,1,2,2,2,2,3,3,3,3,4,4,4,4,5,5,5,5,6, \
+ 6,6,6,7,7,7,7,8,8,8,8,9,9,9,9,10,10,10,10,11, \
+ 11,11,11,12,12,12,12,13}
+ #elif DECDPUN==5
+ #define DECDPUNMAX 99999
+ #define D2UTABLE {0,1,1,1,1,1,2,2,2,2,2,3,3,3,3,3,4,4,4,4,4,5, \
+ 5,5,5,5,6,6,6,6,6,7,7,7,7,7,8,8,8,8,8,9,9,9, \
+ 9,9,10,10,10,10}
+ #elif DECDPUN==6
+ #define DECDPUNMAX 999999
+ #define D2UTABLE {0,1,1,1,1,1,1,2,2,2,2,2,2,3,3,3,3,3,3,4,4,4, \
+ 4,4,4,5,5,5,5,5,5,6,6,6,6,6,6,7,7,7,7,7,7,8, \
+ 8,8,8,8,8,9}
+ #elif DECDPUN==7
+ #define DECDPUNMAX 9999999
+ #define D2UTABLE {0,1,1,1,1,1,1,1,2,2,2,2,2,2,2,3,3,3,3,3,3,3, \
+ 4,4,4,4,4,4,4,5,5,5,5,5,5,5,6,6,6,6,6,6,6,7, \
+ 7,7,7,7,7,7}
+ #elif DECDPUN==8
+ #define DECDPUNMAX 99999999
+ #define D2UTABLE {0,1,1,1,1,1,1,1,1,2,2,2,2,2,2,2,2,3,3,3,3,3, \
+ 3,3,3,4,4,4,4,4,4,4,4,5,5,5,5,5,5,5,5,6,6,6, \
+ 6,6,6,6,6,7}
+ #elif DECDPUN==9
+ #define DECDPUNMAX 999999999
+ #define D2UTABLE {0,1,1,1,1,1,1,1,1,1,2,2,2,2,2,2,2,2,2,3,3,3, \
+ 3,3,3,3,3,3,4,4,4,4,4,4,4,4,4,5,5,5,5,5,5,5, \
+ 5,5,6,6,6,6}
+ #elif defined(DECDPUN)
+ #error DECDPUN must be in the range 1-9
+ #endif
+
+ /* ----- Shared data (in decNumber.c) ----- */
+ /* Public lookup table used by the D2U macro (see below) */
+ #define DECMAXD2U 49
+ extern const uByte d2utable[DECMAXD2U+1];
+
+ /* ----- Macros ----- */
+ /* ISZERO -- return true if decNumber dn is a zero */
+ /* [performance-critical in some situations] */
+ #define ISZERO(dn) decNumberIsZero(dn) /* now just a local name */
+
+ /* D2U -- return the number of Units needed to hold d digits */
+ /* (runtime version, with table lookaside for small d) */
+ #if DECDPUN==8
+ #define D2U(d) ((unsigned)((d)<=DECMAXD2U?d2utable[d]:((d)+7)>>3))
+ #elif DECDPUN==4
+ #define D2U(d) ((unsigned)((d)<=DECMAXD2U?d2utable[d]:((d)+3)>>2))
+ #else
+ #define D2U(d) ((d)<=DECMAXD2U?d2utable[d]:((d)+DECDPUN-1)/DECDPUN)
+ #endif
+ /* SD2U -- static D2U macro (for compile-time calculation) */
+ #define SD2U(d) (((d)+DECDPUN-1)/DECDPUN)
+
+ /* MSUDIGITS -- returns digits in msu, from digits, calculated */
+ /* using D2U */
+ #define MSUDIGITS(d) ((d)-(D2U(d)-1)*DECDPUN)
+
+ /* D2N -- return the number of decNumber structs that would be */
+ /* needed to contain that number of digits (and the initial */
+ /* decNumber struct) safely. Note that one Unit is included in the */
+ /* initial structure. Used for allocating space that is aligned on */
+ /* a decNumber struct boundary. */
+ #define D2N(d) \
+ ((((SD2U(d)-1)*sizeof(Unit))+sizeof(decNumber)*2-1)/sizeof(decNumber))
+
+ /* TODIGIT -- macro to remove the leading digit from the unsigned */
+ /* integer u at column cut (counting from the right, LSD=0) and */
+ /* place it as an ASCII character into the character pointed to by */
+ /* c. Note that cut must be <= 9, and the maximum value for u is */
+ /* 2,000,000,000 (as is needed for negative exponents of */
+ /* subnormals). The unsigned integer pow is used as a temporary */
+ /* variable. */
+ #define TODIGIT(u, cut, c, pow) { \
+ *(c)='0'; \
+ pow=DECPOWERS[cut]*2; \
+ if ((u)>pow) { \
+ pow*=4; \
+ if ((u)>=pow) {(u)-=pow; *(c)+=8;} \
+ pow/=2; \
+ if ((u)>=pow) {(u)-=pow; *(c)+=4;} \
+ pow/=2; \
+ } \
+ if ((u)>=pow) {(u)-=pow; *(c)+=2;} \
+ pow/=2; \
+ if ((u)>=pow) {(u)-=pow; *(c)+=1;} \
+ }
+
+ /* ---------------------------------------------------------------- */
+ /* Definitions for fixed-precision modules (only valid after */
+ /* decSingle.h, decDouble.h, or decQuad.h has been included) */
+ /* ---------------------------------------------------------------- */
+
+ /* bcdnum -- a structure describing a format-independent finite */
+ /* number, whose coefficient is a string of bcd8 uBytes */
+ typedef struct {
+ uByte *msd; /* -> most significant digit */
+ uByte *lsd; /* -> least ditto */
+ uInt sign; /* 0=positive, DECFLOAT_Sign=negative */
+ Int exponent; /* Unadjusted signed exponent (q), or */
+ /* DECFLOAT_NaN etc. for a special */
+ } bcdnum;
+
+ /* Test if exponent or bcdnum exponent must be a special, etc. */
+ #define EXPISSPECIAL(exp) ((exp)>=DECFLOAT_MinSp)
+ #define EXPISINF(exp) (exp==DECFLOAT_Inf)
+ #define EXPISNAN(exp) (exp==DECFLOAT_qNaN || exp==DECFLOAT_sNaN)
+ #define NUMISSPECIAL(num) (EXPISSPECIAL((num)->exponent))
+
+ /* Refer to a 32-bit word or byte in a decFloat (df) by big-endian */
+ /* (array) notation (the 0 word or byte contains the sign bit), */
+ /* automatically adjusting for endianness; similarly address a word */
+ /* in the next-wider format (decFloatWider, or dfw) */
+ #define DECWORDS (DECBYTES/4)
+ #define DECWWORDS (DECWBYTES/4)
+ #if DECLITEND
+ #define DFWORD(df, off) UINTAT((df)->bytes+(DECWORDS-1-(off))*4)
+ #define DFBYTE(df, off) UBYTEAT((df)->bytes+(DECBYTES-1-(off)))
+ #define DFWWORD(dfw, off) UINTAT((dfw)->bytes+(DECWWORDS-1-(off))*4)
+ #else
+ #define DFWORD(df, off) UINTAT((df)->bytes+(off)*4)
+ #define DFBYTE(df, off) UBYTEAT((df)->bytes+(off))
+ #define DFWWORD(dfw, off) UINTAT((dfw)->bytes+(off)*4)
+ #endif
+
+ /* Tests for sign or specials, directly on DECFLOATs */
+ #define DFISSIGNED(df) (DFWORD(df, 0)&0x80000000)
+ #define DFISSPECIAL(df) ((DFWORD(df, 0)&0x78000000)==0x78000000)
+ #define DFISINF(df) ((DFWORD(df, 0)&0x7c000000)==0x78000000)
+ #define DFISNAN(df) ((DFWORD(df, 0)&0x7c000000)==0x7c000000)
+ #define DFISQNAN(df) ((DFWORD(df, 0)&0x7e000000)==0x7c000000)
+ #define DFISSNAN(df) ((DFWORD(df, 0)&0x7e000000)==0x7e000000)
+
+ /* Shared lookup tables */
+ extern const uInt DECCOMBMSD[64]; /* Combination field -> MSD */
+ extern const uInt DECCOMBFROM[48]; /* exp+msd -> Combination */
+
+ /* Private generic (utility) routine */
+ #if DECCHECK || DECTRACE
+ extern void decShowNum(const bcdnum *, const char *);
+ #endif
+
+ /* Format-dependent macros and constants */
+ #if defined(DECPMAX)
+
+ /* Useful constants */
+ #define DECPMAX9 (ROUNDUP(DECPMAX, 9)/9) /* 'Pmax' in 10**9s */
+ /* Top words for a zero */
+ #define SINGLEZERO 0x22500000
+ #define DOUBLEZERO 0x22380000
+ #define QUADZERO 0x22080000
+ /* [ZEROWORD is defined to be one of these in the DFISZERO macro] */
+
+ /* Format-dependent common tests: */
+ /* DFISZERO -- test for (any) zero */
+ /* DFISCCZERO -- test for coefficient continuation being zero */
+ /* DFISCC01 -- test for coefficient contains only 0s and 1s */
+ /* DFISINT -- test for finite and exponent q=0 */
+ /* DFISUINT01 -- test for sign=0, finite, exponent q=0, and */
+ /* MSD=0 or 1 */
+ /* ZEROWORD is also defined here. */
+ /* In DFISZERO the first test checks the least-significant word */
+ /* (most likely to be non-zero); the penultimate tests MSD and */
+ /* DPDs in the signword, and the final test excludes specials and */
+ /* MSD>7. DFISINT similarly has to allow for the two forms of */
+ /* MSD codes. DFISUINT01 only has to allow for one form of MSD */
+ /* code. */
+ #if DECPMAX==7
+ #define ZEROWORD SINGLEZERO
+ /* [test macros not needed except for Zero] */
+ #define DFISZERO(df) ((DFWORD(df, 0)&0x1c0fffff)==0 \
+ && (DFWORD(df, 0)&0x60000000)!=0x60000000)
+ #elif DECPMAX==16
+ #define ZEROWORD DOUBLEZERO
+ #define DFISZERO(df) ((DFWORD(df, 1)==0 \
+ && (DFWORD(df, 0)&0x1c03ffff)==0 \
+ && (DFWORD(df, 0)&0x60000000)!=0x60000000))
+ #define DFISINT(df) ((DFWORD(df, 0)&0x63fc0000)==0x22380000 \
+ ||(DFWORD(df, 0)&0x7bfc0000)==0x6a380000)
+ #define DFISUINT01(df) ((DFWORD(df, 0)&0xfbfc0000)==0x22380000)
+ #define DFISCCZERO(df) (DFWORD(df, 1)==0 \
+ && (DFWORD(df, 0)&0x0003ffff)==0)
+ #define DFISCC01(df) ((DFWORD(df, 0)&~0xfffc9124)==0 \
+ && (DFWORD(df, 1)&~0x49124491)==0)
+ #elif DECPMAX==34
+ #define ZEROWORD QUADZERO
+ #define DFISZERO(df) ((DFWORD(df, 3)==0 \
+ && DFWORD(df, 2)==0 \
+ && DFWORD(df, 1)==0 \
+ && (DFWORD(df, 0)&0x1c003fff)==0 \
+ && (DFWORD(df, 0)&0x60000000)!=0x60000000))
+ #define DFISINT(df) ((DFWORD(df, 0)&0x63ffc000)==0x22080000 \
+ ||(DFWORD(df, 0)&0x7bffc000)==0x6a080000)
+ #define DFISUINT01(df) ((DFWORD(df, 0)&0xfbffc000)==0x22080000)
+ #define DFISCCZERO(df) (DFWORD(df, 3)==0 \
+ && DFWORD(df, 2)==0 \
+ && DFWORD(df, 1)==0 \
+ && (DFWORD(df, 0)&0x00003fff)==0)
+
+ #define DFISCC01(df) ((DFWORD(df, 0)&~0xffffc912)==0 \
+ && (DFWORD(df, 1)&~0x44912449)==0 \
+ && (DFWORD(df, 2)&~0x12449124)==0 \
+ && (DFWORD(df, 3)&~0x49124491)==0)
+ #endif
+
+ /* Macros to test if a certain 10 bits of a uInt or pair of uInts */
+ /* are a canonical declet [higher or lower bits are ignored]. */
+ /* declet is at offset 0 (from the right) in a uInt: */
+ #define CANONDPD(dpd) (((dpd)&0x300)==0 || ((dpd)&0x6e)!=0x6e)
+ /* declet is at offset k (a multiple of 2) in a uInt: */
+ #define CANONDPDOFF(dpd, k) (((dpd)&(0x300<<(k)))==0 \
+ || ((dpd)&(((uInt)0x6e)<<(k)))!=(((uInt)0x6e)<<(k)))
+ /* declet is at offset k (a multiple of 2) in a pair of uInts: */
+ /* [the top 2 bits will always be in the more-significant uInt] */
+ #define CANONDPDTWO(hi, lo, k) (((hi)&(0x300>>(32-(k))))==0 \
+ || ((hi)&(0x6e>>(32-(k))))!=(0x6e>>(32-(k))) \
+ || ((lo)&(((uInt)0x6e)<<(k)))!=(((uInt)0x6e)<<(k)))
+
+ /* Macro to test whether a full-length (length DECPMAX) BCD8 */
+ /* coefficient is zero */
+ /* test just the LSWord first, then the remainder */
+ #if DECPMAX==7
+ #define ISCOEFFZERO(u) (UINTAT((u)+DECPMAX-4)==0 \
+ && UINTAT((u)+DECPMAX-7)==0)
+ #elif DECPMAX==16
+ #define ISCOEFFZERO(u) (UINTAT((u)+DECPMAX-4)==0 \
+ && (UINTAT((u)+DECPMAX-8)+UINTAT((u)+DECPMAX-12) \
+ +UINTAT((u)+DECPMAX-16))==0)
+ #elif DECPMAX==34
+ #define ISCOEFFZERO(u) (UINTAT((u)+DECPMAX-4)==0 \
+ && (UINTAT((u)+DECPMAX-8) +UINTAT((u)+DECPMAX-12) \
+ +UINTAT((u)+DECPMAX-16)+UINTAT((u)+DECPMAX-20) \
+ +UINTAT((u)+DECPMAX-24)+UINTAT((u)+DECPMAX-28) \
+ +UINTAT((u)+DECPMAX-32)+USHORTAT((u)+DECPMAX-34))==0)
+ #endif
+
+ /* Macros and masks for the exponent continuation field and MSD */
+ /* Get the exponent continuation from a decFloat *df as an Int */
+ #define GETECON(df) ((Int)((DFWORD((df), 0)&0x03ffffff)>>(32-6-DECECONL)))
+ /* Ditto, from the next-wider format */
+ #define GETWECON(df) ((Int)((DFWWORD((df), 0)&0x03ffffff)>>(32-6-DECWECONL)))
+ /* Get the biased exponent similarly */
+ #define GETEXP(df) ((Int)(DECCOMBEXP[DFWORD((df), 0)>>26]+GETECON(df)))
+ /* Get the unbiased exponent similarly */
+ #define GETEXPUN(df) ((Int)GETEXP(df)-DECBIAS)
+ /* Get the MSD similarly (as uInt) */
+ #define GETMSD(df) (DECCOMBMSD[DFWORD((df), 0)>>26])
+
+ /* Compile-time computes of the exponent continuation field masks */
+ /* full exponent continuation field: */
+ #define ECONMASK ((0x03ffffff>>(32-6-DECECONL))<<(32-6-DECECONL))
+ /* same, not including its first digit (the qNaN/sNaN selector): */
+ #define ECONNANMASK ((0x01ffffff>>(32-6-DECECONL))<<(32-6-DECECONL))
+
+ /* Macros to decode the coefficient in a finite decFloat *df into */
+ /* a BCD string (uByte *bcdin) of length DECPMAX uBytes */
+
+ /* In-line sequence to convert 10 bits at right end of uInt dpd */
+ /* to three BCD8 digits starting at uByte u. Note that an extra */
+ /* byte is written to the right of the three digits because this */
+ /* moves four at a time for speed; the alternative macro moves */
+ /* exactly three bytes */
+ #define dpd2bcd8(u, dpd) { \
+ UINTAT(u)=UINTAT(&DPD2BCD8[((dpd)&0x3ff)*4]);}
+
+ #define dpd2bcd83(u, dpd) { \
+ *(u)=DPD2BCD8[((dpd)&0x3ff)*4]; \
+ *(u+1)=DPD2BCD8[((dpd)&0x3ff)*4+1]; \
+ *(u+2)=DPD2BCD8[((dpd)&0x3ff)*4+2];}
+
+ /* Decode the declets. After extracting each one, it is decoded */
+ /* to BCD8 using a table lookup (also used for variable-length */
+ /* decode). Each DPD decode is 3 bytes BCD8 plus a one-byte */
+ /* length which is not used, here). Fixed-length 4-byte moves */
+ /* are fast, however, almost everywhere, and so are used except */
+ /* for the final three bytes (to avoid overrun). The code below */
+ /* is 36 instructions for Doubles and about 70 for Quads, even */
+ /* on IA32. */
+
+ /* Two macros are defined for each format: */
+ /* GETCOEFF extracts the coefficient of the current format */
+ /* GETWCOEFF extracts the coefficient of the next-wider format. */
+ /* The latter is a copy of the next-wider GETCOEFF using DFWWORD. */
+
+ #if DECPMAX==7
+ #define GETCOEFF(df, bcd) { \
+ uInt sourhi=DFWORD(df, 0); \
+ *(bcd)=(uByte)DECCOMBMSD[sourhi>>26]; \
+ dpd2bcd8(bcd+1, sourhi>>10); \
+ dpd2bcd83(bcd+4, sourhi);}
+ #define GETWCOEFF(df, bcd) { \
+ uInt sourhi=DFWWORD(df, 0); \
+ uInt sourlo=DFWWORD(df, 1); \
+ *(bcd)=(uByte)DECCOMBMSD[sourhi>>26]; \
+ dpd2bcd8(bcd+1, sourhi>>8); \
+ dpd2bcd8(bcd+4, (sourhi<<2) | (sourlo>>30)); \
+ dpd2bcd8(bcd+7, sourlo>>20); \
+ dpd2bcd8(bcd+10, sourlo>>10); \
+ dpd2bcd83(bcd+13, sourlo);}
+
+ #elif DECPMAX==16
+ #define GETCOEFF(df, bcd) { \
+ uInt sourhi=DFWORD(df, 0); \
+ uInt sourlo=DFWORD(df, 1); \
+ *(bcd)=(uByte)DECCOMBMSD[sourhi>>26]; \
+ dpd2bcd8(bcd+1, sourhi>>8); \
+ dpd2bcd8(bcd+4, (sourhi<<2) | (sourlo>>30)); \
+ dpd2bcd8(bcd+7, sourlo>>20); \
+ dpd2bcd8(bcd+10, sourlo>>10); \
+ dpd2bcd83(bcd+13, sourlo);}
+ #define GETWCOEFF(df, bcd) { \
+ uInt sourhi=DFWWORD(df, 0); \
+ uInt sourmh=DFWWORD(df, 1); \
+ uInt sourml=DFWWORD(df, 2); \
+ uInt sourlo=DFWWORD(df, 3); \
+ *(bcd)=(uByte)DECCOMBMSD[sourhi>>26]; \
+ dpd2bcd8(bcd+1, sourhi>>4); \
+ dpd2bcd8(bcd+4, ((sourhi)<<6) | (sourmh>>26)); \
+ dpd2bcd8(bcd+7, sourmh>>16); \
+ dpd2bcd8(bcd+10, sourmh>>6); \
+ dpd2bcd8(bcd+13, ((sourmh)<<4) | (sourml>>28)); \
+ dpd2bcd8(bcd+16, sourml>>18); \
+ dpd2bcd8(bcd+19, sourml>>8); \
+ dpd2bcd8(bcd+22, ((sourml)<<2) | (sourlo>>30)); \
+ dpd2bcd8(bcd+25, sourlo>>20); \
+ dpd2bcd8(bcd+28, sourlo>>10); \
+ dpd2bcd83(bcd+31, sourlo);}
+
+ #elif DECPMAX==34
+ #define GETCOEFF(df, bcd) { \
+ uInt sourhi=DFWORD(df, 0); \
+ uInt sourmh=DFWORD(df, 1); \
+ uInt sourml=DFWORD(df, 2); \
+ uInt sourlo=DFWORD(df, 3); \
+ *(bcd)=(uByte)DECCOMBMSD[sourhi>>26]; \
+ dpd2bcd8(bcd+1, sourhi>>4); \
+ dpd2bcd8(bcd+4, ((sourhi)<<6) | (sourmh>>26)); \
+ dpd2bcd8(bcd+7, sourmh>>16); \
+ dpd2bcd8(bcd+10, sourmh>>6); \
+ dpd2bcd8(bcd+13, ((sourmh)<<4) | (sourml>>28)); \
+ dpd2bcd8(bcd+16, sourml>>18); \
+ dpd2bcd8(bcd+19, sourml>>8); \
+ dpd2bcd8(bcd+22, ((sourml)<<2) | (sourlo>>30)); \
+ dpd2bcd8(bcd+25, sourlo>>20); \
+ dpd2bcd8(bcd+28, sourlo>>10); \
+ dpd2bcd83(bcd+31, sourlo);}
+
+ #define GETWCOEFF(df, bcd) {??} /* [should never be used] */
+ #endif
+
+ /* Macros to decode the coefficient in a finite decFloat *df into */
+ /* a base-billion uInt array, with the least-significant */
+ /* 0-999999999 'digit' at offset 0. */
+
+ /* Decode the declets. After extracting each one, it is decoded */
+ /* to binary using a table lookup. Three tables are used; one */
+ /* the usual DPD to binary, the other two pre-multiplied by 1000 */
+ /* and 1000000 to avoid multiplication during decode. These */
+ /* tables can also be used for multiplying up the MSD as the DPD */
+ /* code for 0 through 9 is the identity. */
+ #define DPD2BIN0 DPD2BIN /* for prettier code */
+
+ #if DECPMAX==7
+ #define GETCOEFFBILL(df, buf) { \
+ uInt sourhi=DFWORD(df, 0); \
+ (buf)[0]=DPD2BIN0[sourhi&0x3ff] \
+ +DPD2BINK[(sourhi>>10)&0x3ff] \
+ +DPD2BINM[DECCOMBMSD[sourhi>>26]];}
+
+ #elif DECPMAX==16
+ #define GETCOEFFBILL(df, buf) { \
+ uInt sourhi, sourlo; \
+ sourlo=DFWORD(df, 1); \
+ (buf)[0]=DPD2BIN0[sourlo&0x3ff] \
+ +DPD2BINK[(sourlo>>10)&0x3ff] \
+ +DPD2BINM[(sourlo>>20)&0x3ff]; \
+ sourhi=DFWORD(df, 0); \
+ (buf)[1]=DPD2BIN0[((sourhi<<2) | (sourlo>>30))&0x3ff] \
+ +DPD2BINK[(sourhi>>8)&0x3ff] \
+ +DPD2BINM[DECCOMBMSD[sourhi>>26]];}
+
+ #elif DECPMAX==34
+ #define GETCOEFFBILL(df, buf) { \
+ uInt sourhi, sourmh, sourml, sourlo; \
+ sourlo=DFWORD(df, 3); \
+ (buf)[0]=DPD2BIN0[sourlo&0x3ff] \
+ +DPD2BINK[(sourlo>>10)&0x3ff] \
+ +DPD2BINM[(sourlo>>20)&0x3ff]; \
+ sourml=DFWORD(df, 2); \
+ (buf)[1]=DPD2BIN0[((sourml<<2) | (sourlo>>30))&0x3ff] \
+ +DPD2BINK[(sourml>>8)&0x3ff] \
+ +DPD2BINM[(sourml>>18)&0x3ff]; \
+ sourmh=DFWORD(df, 1); \
+ (buf)[2]=DPD2BIN0[((sourmh<<4) | (sourml>>28))&0x3ff] \
+ +DPD2BINK[(sourmh>>6)&0x3ff] \
+ +DPD2BINM[(sourmh>>16)&0x3ff]; \
+ sourhi=DFWORD(df, 0); \
+ (buf)[3]=DPD2BIN0[((sourhi<<6) | (sourmh>>26))&0x3ff] \
+ +DPD2BINK[(sourhi>>4)&0x3ff] \
+ +DPD2BINM[DECCOMBMSD[sourhi>>26]];}
+
+ #endif
+
+ /* Macros to decode the coefficient in a finite decFloat *df into */
+ /* a base-thousand uInt array, with the least-significant 0-999 */
+ /* 'digit' at offset 0. */
+
+ /* Decode the declets. After extracting each one, it is decoded */
+ /* to binary using a table lookup. */
+ #if DECPMAX==7
+ #define GETCOEFFTHOU(df, buf) { \
+ uInt sourhi=DFWORD(df, 0); \
+ (buf)[0]=DPD2BIN[sourhi&0x3ff]; \
+ (buf)[1]=DPD2BIN[(sourhi>>10)&0x3ff]; \
+ (buf)[2]=DECCOMBMSD[sourhi>>26];}
+
+ #elif DECPMAX==16
+ #define GETCOEFFTHOU(df, buf) { \
+ uInt sourhi, sourlo; \
+ sourlo=DFWORD(df, 1); \
+ (buf)[0]=DPD2BIN[sourlo&0x3ff]; \
+ (buf)[1]=DPD2BIN[(sourlo>>10)&0x3ff]; \
+ (buf)[2]=DPD2BIN[(sourlo>>20)&0x3ff]; \
+ sourhi=DFWORD(df, 0); \
+ (buf)[3]=DPD2BIN[((sourhi<<2) | (sourlo>>30))&0x3ff]; \
+ (buf)[4]=DPD2BIN[(sourhi>>8)&0x3ff]; \
+ (buf)[5]=DECCOMBMSD[sourhi>>26];}
+
+ #elif DECPMAX==34
+ #define GETCOEFFTHOU(df, buf) { \
+ uInt sourhi, sourmh, sourml, sourlo; \
+ sourlo=DFWORD(df, 3); \
+ (buf)[0]=DPD2BIN[sourlo&0x3ff]; \
+ (buf)[1]=DPD2BIN[(sourlo>>10)&0x3ff]; \
+ (buf)[2]=DPD2BIN[(sourlo>>20)&0x3ff]; \
+ sourml=DFWORD(df, 2); \
+ (buf)[3]=DPD2BIN[((sourml<<2) | (sourlo>>30))&0x3ff]; \
+ (buf)[4]=DPD2BIN[(sourml>>8)&0x3ff]; \
+ (buf)[5]=DPD2BIN[(sourml>>18)&0x3ff]; \
+ sourmh=DFWORD(df, 1); \
+ (buf)[6]=DPD2BIN[((sourmh<<4) | (sourml>>28))&0x3ff]; \
+ (buf)[7]=DPD2BIN[(sourmh>>6)&0x3ff]; \
+ (buf)[8]=DPD2BIN[(sourmh>>16)&0x3ff]; \
+ sourhi=DFWORD(df, 0); \
+ (buf)[9]=DPD2BIN[((sourhi<<6) | (sourmh>>26))&0x3ff]; \
+ (buf)[10]=DPD2BIN[(sourhi>>4)&0x3ff]; \
+ (buf)[11]=DECCOMBMSD[sourhi>>26];}
+
+ #endif
+
+ /* Set a decFloat to the maximum positive finite number (Nmax) */
+ #if DECPMAX==7
+ #define DFSETNMAX(df) \
+ {DFWORD(df, 0)=0x77f3fcff;}
+ #elif DECPMAX==16
+ #define DFSETNMAX(df) \
+ {DFWORD(df, 0)=0x77fcff3f; \
+ DFWORD(df, 1)=0xcff3fcff;}
+ #elif DECPMAX==34
+ #define DFSETNMAX(df) \
+ {DFWORD(df, 0)=0x77ffcff3; \
+ DFWORD(df, 1)=0xfcff3fcf; \
+ DFWORD(df, 2)=0xf3fcff3f; \
+ DFWORD(df, 3)=0xcff3fcff;}
+ #endif
+
+ /* [end of format-dependent macros and constants] */
+ #endif
+
+#else
+ #error decNumberLocal included more than once
+#endif
diff --git a/libdecnumber/decNumberSymbols.h b/libdecnumber/decNumberSymbols.h
new file mode 100644
index 0000000..e638a07
--- /dev/null
+++ b/libdecnumber/decNumberSymbols.h
@@ -0,0 +1,69 @@
+#if !defined(DECNUMBERSYMBOLS)
+#define DECNUMBERSYMBOLS
+
+#ifdef IN_LIBGCC2
+#define decNumberAbs __decNumberAbs
+#define decNumberAdd __decNumberAdd
+#define decNumberAnd __decNumberAnd
+#define decNumberClass __decNumberClass
+#define decNumberClassToString __decNumberClassToString
+#define decNumberCompare __decNumberCompare
+#define decNumberCompareSignal __decNumberCompareSignal
+#define decNumberCompareTotal __decNumberCompareTotal
+#define decNumberCompareTotalMag __decNumberCompareTotalMag
+#define decNumberCopy __decNumberCopy
+#define decNumberCopyAbs __decNumberCopyAbs
+#define decNumberCopyNegate __decNumberCopyNegate
+#define decNumberCopySign __decNumberCopySign
+#define decNumberDivide __decNumberDivide
+#define decNumberDivideInteger __decNumberDivideInteger
+#define decNumberExp __decNumberExp
+#define decNumberFMA __decNumberFMA
+#define decNumberFromInt32 __decNumberFromInt32
+#define decNumberFromString __decNumberFromString
+#define decNumberFromUInt32 __decNumberFromUInt32
+#define decNumberGetBCD __decNumberGetBCD
+#define decNumberInvert __decNumberInvert
+#define decNumberIsNormal __decNumberIsNormal
+#define decNumberIsSubnormal __decNumberIsSubnormal
+#define decNumberLn __decNumberLn
+#define decNumberLog10 __decNumberLog10
+#define decNumberLogB __decNumberLogB
+#define decNumberMax __decNumberMax
+#define decNumberMaxMag __decNumberMaxMag
+#define decNumberMin __decNumberMin
+#define decNumberMinMag __decNumberMinMag
+#define decNumberMinus __decNumberMinus
+#define decNumberMultiply __decNumberMultiply
+#define decNumberNextMinus __decNumberNextMinus
+#define decNumberNextPlus __decNumberNextPlus
+#define decNumberNextToward __decNumberNextToward
+#define decNumberNormalize __decNumberNormalize
+#define decNumberOr __decNumberOr
+#define decNumberPlus __decNumberPlus
+#define decNumberPower __decNumberPower
+#define decNumberQuantize __decNumberQuantize
+#define decNumberReduce __decNumberReduce
+#define decNumberRemainder __decNumberRemainder
+#define decNumberRemainderNear __decNumberRemainderNear
+#define decNumberRescale __decNumberRescale
+#define decNumberRotate __decNumberRotate
+#define decNumberSameQuantum __decNumberSameQuantum
+#define decNumberScaleB __decNumberScaleB
+#define decNumberSetBCD __decNumberSetBCD
+#define decNumberShift __decNumberShift
+#define decNumberSquareRoot __decNumberSquareRoot
+#define decNumberSubtract __decNumberSubtract
+#define decNumberToEngString __decNumberToEngString
+#define decNumberToInt32 __decNumberToInt32
+#define decNumberToIntegralExact __decNumberToIntegralExact
+#define decNumberToIntegralValue __decNumberToIntegralValue
+#define decNumberToString __decNumberToString
+#define decNumberToUInt32 __decNumberToUInt32
+#define decNumberTrim __decNumberTrim
+#define decNumberVersion __decNumberVersion
+#define decNumberXor __decNumberXor
+#define decNumberZero __decNumberZero
+#endif
+
+#endif
diff --git a/libdecnumber/decPacked.c b/libdecnumber/decPacked.c
new file mode 100644
index 0000000..2b912fe
--- /dev/null
+++ b/libdecnumber/decPacked.c
@@ -0,0 +1,235 @@
+/* Packed decimal conversion module for the decNumber C Library.
+ Copyright (C) 2007 Free Software Foundation, Inc.
+ Contributed by IBM Corporation. Author Mike Cowlishaw.
+
+ This file is part of GCC.
+
+ GCC is free software; you can redistribute it and/or modify it under
+ the terms of the GNU General Public License as published by the Free
+ Software Foundation; either version 2, or (at your option) any later
+ version.
+
+ In addition to the permissions in the GNU General Public License,
+ the Free Software Foundation gives you unlimited permission to link
+ the compiled version of this file into combinations with other
+ programs, and to distribute those combinations without any
+ restriction coming from the use of this file. (The General Public
+ License restrictions do apply in other respects; for example, they
+ cover modification of the file, and distribution when not linked
+ into a combine executable.)
+
+ GCC is distributed in the hope that it will be useful, but WITHOUT ANY
+ WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
+ for more details.
+
+ You should have received a copy of the GNU General Public License
+ along with GCC; see the file COPYING. If not, write to the Free
+ Software Foundation, 51 Franklin Street, Fifth Floor, Boston, MA
+ 02110-1301, USA. */
+
+/* ------------------------------------------------------------------ */
+/* Packed Decimal conversion module */
+/* ------------------------------------------------------------------ */
+/* This module comprises the routines for Packed Decimal format */
+/* numbers. Conversions are supplied to and from decNumber, which in */
+/* turn supports: */
+/* conversions to and from string */
+/* arithmetic routines */
+/* utilities. */
+/* Conversions from decNumber to and from densely packed decimal */
+/* formats are provided by the decimal32 through decimal128 modules. */
+/* ------------------------------------------------------------------ */
+
+#include <string.h> /* for NULL */
+#include "decNumber.h" /* base number library */
+#include "decPacked.h" /* packed decimal */
+#include "decNumberLocal.h" /* decNumber local types, etc. */
+
+/* ------------------------------------------------------------------ */
+/* decPackedFromNumber -- convert decNumber to BCD Packed Decimal */
+/* */
+/* bcd is the BCD bytes */
+/* length is the length of the BCD array */
+/* scale is the scale result */
+/* dn is the decNumber */
+/* returns bcd, or NULL if error */
+/* */
+/* The number is converted to a BCD packed decimal byte array, */
+/* right aligned in the bcd array, whose length is indicated by the */
+/* second parameter. The final 4-bit nibble in the array will be a */
+/* sign nibble, C (1100) for + and D (1101) for -. Unused bytes and */
+/* nibbles to the left of the number are set to 0. */
+/* */
+/* scale is set to the scale of the number (this is the exponent, */
+/* negated). To force the number to a specified scale, first use the */
+/* decNumberRescale routine, which will round and change the exponent */
+/* as necessary. */
+/* */
+/* If there is an error (that is, the decNumber has too many digits */
+/* to fit in length bytes, or it is a NaN or Infinity), NULL is */
+/* returned and the bcd and scale results are unchanged. Otherwise */
+/* bcd is returned. */
+/* ------------------------------------------------------------------ */
+uByte * decPackedFromNumber(uByte *bcd, Int length, Int *scale,
+ const decNumber *dn) {
+ const Unit *up=dn->lsu; /* Unit array pointer */
+ uByte obyte, *out; /* current output byte, and where it goes */
+ Int indigs=dn->digits; /* digits processed */
+ uInt cut=DECDPUN; /* downcounter per Unit */
+ uInt u=*up; /* work */
+ uInt nib; /* .. */
+ #if DECDPUN<=4
+ uInt temp; /* .. */
+ #endif
+
+ if (dn->digits>length*2-1 /* too long .. */
+ ||(dn->bits & DECSPECIAL)) return NULL; /* .. or special -- hopeless */
+
+ if (dn->bits&DECNEG) obyte=DECPMINUS; /* set the sign .. */
+ else obyte=DECPPLUS;
+ *scale=-dn->exponent; /* .. and scale */
+
+ /* loop from lowest (rightmost) byte */
+ out=bcd+length-1; /* -> final byte */
+ for (; out>=bcd; out--) {
+ if (indigs>0) {
+ if (cut==0) {
+ up++;
+ u=*up;
+ cut=DECDPUN;
+ }
+ #if DECDPUN<=4
+ temp=(u*6554)>>16; /* fast /10 */
+ nib=u-X10(temp);
+ u=temp;
+ #else
+ nib=u%10; /* cannot use *6554 trick :-( */
+ u=u/10;
+ #endif
+ obyte|=(nib<<4);
+ indigs--;
+ cut--;
+ }
+ *out=obyte;
+ obyte=0; /* assume 0 */
+ if (indigs>0) {
+ if (cut==0) {
+ up++;
+ u=*up;
+ cut=DECDPUN;
+ }
+ #if DECDPUN<=4
+ temp=(u*6554)>>16; /* as above */
+ obyte=(uByte)(u-X10(temp));
+ u=temp;
+ #else
+ obyte=(uByte)(u%10);
+ u=u/10;
+ #endif
+ indigs--;
+ cut--;
+ }
+ } /* loop */
+
+ return bcd;
+ } /* decPackedFromNumber */
+
+/* ------------------------------------------------------------------ */
+/* decPackedToNumber -- convert BCD Packed Decimal to a decNumber */
+/* */
+/* bcd is the BCD bytes */
+/* length is the length of the BCD array */
+/* scale is the scale associated with the BCD integer */
+/* dn is the decNumber [with space for length*2 digits] */
+/* returns dn, or NULL if error */
+/* */
+/* The BCD packed decimal byte array, together with an associated */
+/* scale, is converted to a decNumber. The BCD array is assumed full */
+/* of digits, and must be ended by a 4-bit sign nibble in the least */
+/* significant four bits of the final byte. */
+/* */
+/* The scale is used (negated) as the exponent of the decNumber. */
+/* Note that zeros may have a sign and/or a scale. */
+/* */
+/* The decNumber structure is assumed to have sufficient space to */
+/* hold the converted number (that is, up to length*2-1 digits), so */
+/* no error is possible unless the adjusted exponent is out of range, */
+/* no sign nibble was found, or a sign nibble was found before the */
+/* final nibble. In these error cases, NULL is returned and the */
+/* decNumber will be 0. */
+/* ------------------------------------------------------------------ */
+decNumber * decPackedToNumber(const uByte *bcd, Int length,
+ const Int *scale, decNumber *dn) {
+ const uByte *last=bcd+length-1; /* -> last byte */
+ const uByte *first; /* -> first non-zero byte */
+ uInt nib; /* work nibble */
+ Unit *up=dn->lsu; /* output pointer */
+ Int digits; /* digits count */
+ Int cut=0; /* phase of output */
+
+ decNumberZero(dn); /* default result */
+ last=&bcd[length-1];
+ nib=*last & 0x0f; /* get the sign */
+ if (nib==DECPMINUS || nib==DECPMINUSALT) dn->bits=DECNEG;
+ else if (nib<=9) return NULL; /* not a sign nibble */
+
+ /* skip leading zero bytes [final byte is always non-zero, due to sign] */
+ for (first=bcd; *first==0;) first++;
+ digits=(last-first)*2+1; /* calculate digits .. */
+ if ((*first & 0xf0)==0) digits--; /* adjust for leading zero nibble */
+ if (digits!=0) dn->digits=digits; /* count of actual digits [if 0, */
+ /* leave as 1] */
+
+ /* check the adjusted exponent; note that scale could be unbounded */
+ dn->exponent=-*scale; /* set the exponent */
+ if (*scale>=0) { /* usual case */
+ if ((dn->digits-*scale-1)<-DECNUMMAXE) { /* underflow */
+ decNumberZero(dn);
+ return NULL;}
+ }
+ else { /* -ve scale; +ve exponent */
+ /* need to be careful to avoid wrap, here, also BADINT case */
+ if ((*scale<-DECNUMMAXE) /* overflow even without digits */
+ || ((dn->digits-*scale-1)>DECNUMMAXE)) { /* overflow */
+ decNumberZero(dn);
+ return NULL;}
+ }
+ if (digits==0) return dn; /* result was zero */
+
+ /* copy the digits to the number's units, starting at the lsu */
+ /* [unrolled] */
+ for (;;) { /* forever */
+ /* left nibble first */
+ nib=(unsigned)(*last & 0xf0)>>4;
+ /* got a digit, in nib */
+ if (nib>9) {decNumberZero(dn); return NULL;}
+
+ if (cut==0) *up=(Unit)nib;
+ else *up=(Unit)(*up+nib*DECPOWERS[cut]);
+ digits--;
+ if (digits==0) break; /* got them all */
+ cut++;
+ if (cut==DECDPUN) {
+ up++;
+ cut=0;
+ }
+ last--; /* ready for next */
+ nib=*last & 0x0f; /* get right nibble */
+ if (nib>9) {decNumberZero(dn); return NULL;}
+
+ /* got a digit, in nib */
+ if (cut==0) *up=(Unit)nib;
+ else *up=(Unit)(*up+nib*DECPOWERS[cut]);
+ digits--;
+ if (digits==0) break; /* got them all */
+ cut++;
+ if (cut==DECDPUN) {
+ up++;
+ cut=0;
+ }
+ } /* forever */
+
+ return dn;
+ } /* decPackedToNumber */
+
diff --git a/libdecnumber/decPacked.h b/libdecnumber/decPacked.h
new file mode 100644
index 0000000..c76aa09
--- /dev/null
+++ b/libdecnumber/decPacked.h
@@ -0,0 +1,70 @@
+/* Packed decimal conversion module header for the decNumber C Library.
+ Copyright (C) 2007 Free Software Foundation, Inc.
+ Contributed by IBM Corporation. Author Mike Cowlishaw.
+
+ This file is part of GCC.
+
+ GCC is free software; you can redistribute it and/or modify it under
+ the terms of the GNU General Public License as published by the Free
+ Software Foundation; either version 2, or (at your option) any later
+ version.
+
+ In addition to the permissions in the GNU General Public License,
+ the Free Software Foundation gives you unlimited permission to link
+ the compiled version of this file into combinations with other
+ programs, and to distribute those combinations without any
+ restriction coming from the use of this file. (The General Public
+ License restrictions do apply in other respects; for example, they
+ cover modification of the file, and distribution when not linked
+ into a combine executable.)
+
+ GCC is distributed in the hope that it will be useful, but WITHOUT ANY
+ WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
+ for more details.
+
+ You should have received a copy of the GNU General Public License
+ along with GCC; see the file COPYING. If not, write to the Free
+ Software Foundation, 51 Franklin Street, Fifth Floor, Boston, MA
+ 02110-1301, USA. */
+
+/* ------------------------------------------------------------------ */
+/* Packed Decimal conversion module header */
+/* ------------------------------------------------------------------ */
+
+#if !defined(DECPACKED)
+ #define DECPACKED
+ #define DECPNAME "decPacked" /* Short name */
+ #define DECPFULLNAME "Packed Decimal conversions" /* Verbose name */
+ #define DECPAUTHOR "Mike Cowlishaw" /* Who to blame */
+
+ #define DECPACKED_DefP 32 /* default precision */
+
+ #ifndef DECNUMDIGITS
+ #define DECNUMDIGITS DECPACKED_DefP /* size if not already defined*/
+ #endif
+ #include "decNumber.h" /* context and number library */
+
+ /* Sign nibble constants */
+ #if !defined(DECPPLUSALT)
+ #define DECPPLUSALT 0x0A /* alternate plus nibble */
+ #define DECPMINUSALT 0x0B /* alternate minus nibble */
+ #define DECPPLUS 0x0C /* preferred plus nibble */
+ #define DECPMINUS 0x0D /* preferred minus nibble */
+ #define DECPPLUSALT2 0x0E /* alternate plus nibble */
+ #define DECPUNSIGNED 0x0F /* alternate plus nibble (unsigned) */
+ #endif
+
+ /* ---------------------------------------------------------------- */
+ /* decPacked public routines */
+ /* ---------------------------------------------------------------- */
+
+ #include "decPackedSymbols.h"
+
+ /* Conversions */
+ uint8_t * decPackedFromNumber(uint8_t *, int32_t, int32_t *,
+ const decNumber *);
+ decNumber * decPackedToNumber(const uint8_t *, int32_t, const int32_t *,
+ decNumber *);
+
+#endif
diff --git a/libdecnumber/decPackedSymbols.h b/libdecnumber/decPackedSymbols.h
new file mode 100644
index 0000000..862db40
--- /dev/null
+++ b/libdecnumber/decPackedSymbols.h
@@ -0,0 +1,9 @@
+#if !defined(DECPACKEDSYMBOLS)
+#define DECPACKEDSYMBOLS
+
+#ifdef IN_LIBGCC2
+#define decPackedFromNumber __decPackedFromNumber
+#define decPackedToNumber __decPackedToNumber
+#endif
+
+#endif
diff --git a/libdecnumber/decQuad.c b/libdecnumber/decQuad.c
new file mode 100644
index 0000000..6ec9b7f
--- /dev/null
+++ b/libdecnumber/decQuad.c
@@ -0,0 +1,146 @@
+/* decQuad module for the decNumber C Library.
+ Copyright (C) 2007 Free Software Foundation, Inc.
+ Contributed by IBM Corporation. Author Mike Cowlishaw.
+
+ This file is part of GCC.
+
+ GCC is free software; you can redistribute it and/or modify it under
+ the terms of the GNU General Public License as published by the Free
+ Software Foundation; either version 2, or (at your option) any later
+ version.
+
+ In addition to the permissions in the GNU General Public License,
+ the Free Software Foundation gives you unlimited permission to link
+ the compiled version of this file into combinations with other
+ programs, and to distribute those combinations without any
+ restriction coming from the use of this file. (The General Public
+ License restrictions do apply in other respects; for example, they
+ cover modification of the file, and distribution when not linked
+ into a combine executable.)
+
+ GCC is distributed in the hope that it will be useful, but WITHOUT ANY
+ WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
+ for more details.
+
+ You should have received a copy of the GNU General Public License
+ along with GCC; see the file COPYING. If not, write to the Free
+ Software Foundation, 51 Franklin Street, Fifth Floor, Boston, MA
+ 02110-1301, USA. */
+
+/* ------------------------------------------------------------------ */
+/* decQuad.c -- decQuad operations module */
+/* ------------------------------------------------------------------ */
+/* This module comprises decQuad operations (including conversions) */
+/* ------------------------------------------------------------------ */
+
+#include "decContext.h" /* public includes */
+#include "decQuad.h" /* .. */
+
+/* Constant mappings for shared code */
+#define DECPMAX DECQUAD_Pmax
+#define DECEMIN DECQUAD_Emin
+#define DECEMAX DECQUAD_Emax
+#define DECEMAXD DECQUAD_EmaxD
+#define DECBYTES DECQUAD_Bytes
+#define DECSTRING DECQUAD_String
+#define DECECONL DECQUAD_EconL
+#define DECBIAS DECQUAD_Bias
+#define DECLETS DECQUAD_Declets
+#define DECQTINY (-DECQUAD_Bias)
+
+/* Type and function mappings for shared code */
+#define decFloat decQuad /* Type name */
+
+/* Utilities and conversions (binary results, extractors, etc.) */
+#define decFloatFromBCD decQuadFromBCD
+#define decFloatFromInt32 decQuadFromInt32
+#define decFloatFromPacked decQuadFromPacked
+#define decFloatFromString decQuadFromString
+#define decFloatFromUInt32 decQuadFromUInt32
+#define decFloatFromWider decQuadFromWider
+#define decFloatGetCoefficient decQuadGetCoefficient
+#define decFloatGetExponent decQuadGetExponent
+#define decFloatSetCoefficient decQuadSetCoefficient
+#define decFloatSetExponent decQuadSetExponent
+#define decFloatShow decQuadShow
+#define decFloatToBCD decQuadToBCD
+#define decFloatToEngString decQuadToEngString
+#define decFloatToInt32 decQuadToInt32
+#define decFloatToInt32Exact decQuadToInt32Exact
+#define decFloatToPacked decQuadToPacked
+#define decFloatToString decQuadToString
+#define decFloatToUInt32 decQuadToUInt32
+#define decFloatToUInt32Exact decQuadToUInt32Exact
+#define decFloatToWider decQuadToWider
+#define decFloatZero decQuadZero
+
+/* Computational (result is a decFloat) */
+#define decFloatAbs decQuadAbs
+#define decFloatAdd decQuadAdd
+#define decFloatAnd decQuadAnd
+#define decFloatDivide decQuadDivide
+#define decFloatDivideInteger decQuadDivideInteger
+#define decFloatFMA decQuadFMA
+#define decFloatInvert decQuadInvert
+#define decFloatLogB decQuadLogB
+#define decFloatMax decQuadMax
+#define decFloatMaxMag decQuadMaxMag
+#define decFloatMin decQuadMin
+#define decFloatMinMag decQuadMinMag
+#define decFloatMinus decQuadMinus
+#define decFloatMultiply decQuadMultiply
+#define decFloatNextMinus decQuadNextMinus
+#define decFloatNextPlus decQuadNextPlus
+#define decFloatNextToward decQuadNextToward
+#define decFloatOr decQuadOr
+#define decFloatPlus decQuadPlus
+#define decFloatQuantize decQuadQuantize
+#define decFloatReduce decQuadReduce
+#define decFloatRemainder decQuadRemainder
+#define decFloatRemainderNear decQuadRemainderNear
+#define decFloatRotate decQuadRotate
+#define decFloatScaleB decQuadScaleB
+#define decFloatShift decQuadShift
+#define decFloatSubtract decQuadSubtract
+#define decFloatToIntegralValue decQuadToIntegralValue
+#define decFloatToIntegralExact decQuadToIntegralExact
+#define decFloatXor decQuadXor
+
+/* Comparisons */
+#define decFloatCompare decQuadCompare
+#define decFloatCompareSignal decQuadCompareSignal
+#define decFloatCompareTotal decQuadCompareTotal
+#define decFloatCompareTotalMag decQuadCompareTotalMag
+
+/* Copies */
+#define decFloatCanonical decQuadCanonical
+#define decFloatCopy decQuadCopy
+#define decFloatCopyAbs decQuadCopyAbs
+#define decFloatCopyNegate decQuadCopyNegate
+#define decFloatCopySign decQuadCopySign
+
+/* Non-computational */
+#define decFloatClass decQuadClass
+#define decFloatClassString decQuadClassString
+#define decFloatDigits decQuadDigits
+#define decFloatIsCanonical decQuadIsCanonical
+#define decFloatIsFinite decQuadIsFinite
+#define decFloatIsInfinite decQuadIsInfinite
+#define decFloatIsInteger decQuadIsInteger
+#define decFloatIsNaN decQuadIsNaN
+#define decFloatIsNormal decQuadIsNormal
+#define decFloatIsSignaling decQuadIsSignaling
+#define decFloatIsSignalling decQuadIsSignalling
+#define decFloatIsSigned decQuadIsSigned
+#define decFloatIsSubnormal decQuadIsSubnormal
+#define decFloatIsZero decQuadIsZero
+#define decFloatRadix decQuadRadix
+#define decFloatSameQuantum decQuadSameQuantum
+#define decFloatVersion decQuadVersion
+
+
+#include "decNumberLocal.h" /* local includes (need DECPMAX) */
+#include "decCommon.c" /* non-arithmetic decFloat routines */
+#include "decBasic.c" /* basic formats routines */
+
diff --git a/libdecnumber/decQuad.h b/libdecnumber/decQuad.h
new file mode 100644
index 0000000..39f75d3
--- /dev/null
+++ b/libdecnumber/decQuad.h
@@ -0,0 +1,186 @@
+/* decQuad module header for the decNumber C Library.
+ Copyright (C) 2007 Free Software Foundation, Inc.
+ Contributed by IBM Corporation. Author Mike Cowlishaw.
+
+ This file is part of GCC.
+
+ GCC is free software; you can redistribute it and/or modify it under
+ the terms of the GNU General Public License as published by the Free
+ Software Foundation; either version 2, or (at your option) any later
+ version.
+
+ In addition to the permissions in the GNU General Public License,
+ the Free Software Foundation gives you unlimited permission to link
+ the compiled version of this file into combinations with other
+ programs, and to distribute those combinations without any
+ restriction coming from the use of this file. (The General Public
+ License restrictions do apply in other respects; for example, they
+ cover modification of the file, and distribution when not linked
+ into a combine executable.)
+
+ GCC is distributed in the hope that it will be useful, but WITHOUT ANY
+ WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
+ for more details.
+
+ You should have received a copy of the GNU General Public License
+ along with GCC; see the file COPYING. If not, write to the Free
+ Software Foundation, 51 Franklin Street, Fifth Floor, Boston, MA
+ 02110-1301, USA. */
+
+/* ------------------------------------------------------------------ */
+/* decQuad.h -- Decimal 128-bit format module header */
+/* ------------------------------------------------------------------ */
+/* Please see decFloats.h for an overview and documentation details. */
+/* ------------------------------------------------------------------ */
+/* This include file is always included by decSingle and decDouble, */
+/* and therefore also holds useful constants used by all three. */
+
+#if !defined(DECQUAD)
+ #define DECQUAD
+
+ #define DECQUADNAME "decimalQuad" /* Short name */
+ #define DECQUADTITLE "Decimal 128-bit datum" /* Verbose name */
+ #define DECQUADAUTHOR "Mike Cowlishaw" /* Who to blame */
+
+ /* parameters for decQuads */
+ #define DECQUAD_Bytes 16 /* length */
+ #define DECQUAD_Pmax 34 /* maximum precision (digits) */
+ #define DECQUAD_Emin -6143 /* minimum adjusted exponent */
+ #define DECQUAD_Emax 6144 /* maximum adjusted exponent */
+ #define DECQUAD_EmaxD 4 /* maximum exponent digits */
+ #define DECQUAD_Bias 6176 /* bias for the exponent */
+ #define DECQUAD_String 43 /* maximum string length, +1 */
+ #define DECQUAD_EconL 12 /* exponent continuation length */
+ #define DECQUAD_Declets 11 /* count of declets */
+ /* highest biased exponent (Elimit-1) */
+ #define DECQUAD_Ehigh (DECQUAD_Emax + DECQUAD_Bias - (DECQUAD_Pmax-1))
+
+ /* Required include */
+ #include "decContext.h"
+
+ /* The decQuad decimal 128-bit type, accessible by bytes */
+ typedef struct {
+ uint8_t bytes[DECQUAD_Bytes]; /* fields: 1, 5, 12, 110 bits */
+ } decQuad;
+
+ /* ---------------------------------------------------------------- */
+ /* Shared constants */
+ /* ---------------------------------------------------------------- */
+
+ /* sign and special values [top 32-bits; last two bits are don't-care
+ for Infinity on input, last bit don't-care for NaNs] */
+ #define DECFLOAT_Sign 0x80000000 /* 1 00000 00 Sign */
+ #define DECFLOAT_NaN 0x7c000000 /* 0 11111 00 NaN generic */
+ #define DECFLOAT_qNaN 0x7c000000 /* 0 11111 00 qNaN */
+ #define DECFLOAT_sNaN 0x7e000000 /* 0 11111 10 sNaN */
+ #define DECFLOAT_Inf 0x78000000 /* 0 11110 00 Infinity */
+ #define DECFLOAT_MinSp 0x78000000 /* minimum special value */
+ /* [specials are all >=MinSp] */
+ /* Sign nibble constants */
+ #if !defined(DECPPLUSALT)
+ #define DECPPLUSALT 0x0A /* alternate plus nibble */
+ #define DECPMINUSALT 0x0B /* alternate minus nibble */
+ #define DECPPLUS 0x0C /* preferred plus nibble */
+ #define DECPMINUS 0x0D /* preferred minus nibble */
+ #define DECPPLUSALT2 0x0E /* alternate plus nibble */
+ #define DECPUNSIGNED 0x0F /* alternate plus nibble (unsigned) */
+ #endif
+
+ /* ---------------------------------------------------------------- */
+ /* Routines -- implemented as decFloat routines in common files */
+ /* ---------------------------------------------------------------- */
+
+ #include "decQuadSymbols.h"
+
+ /* Utilities and conversions, extractors, etc.) */
+ extern decQuad * decQuadFromBCD(decQuad *, int32_t, const uint8_t *, int32_t);
+ extern decQuad * decQuadFromInt32(decQuad *, int32_t);
+ extern decQuad * decQuadFromPacked(decQuad *, int32_t, const uint8_t *);
+ extern decQuad * decQuadFromString(decQuad *, const char *, decContext *);
+ extern decQuad * decQuadFromUInt32(decQuad *, uint32_t);
+ extern int32_t decQuadGetCoefficient(const decQuad *, uint8_t *);
+ extern int32_t decQuadGetExponent(const decQuad *);
+ extern decQuad * decQuadSetCoefficient(decQuad *, const uint8_t *, int32_t);
+ extern decQuad * decQuadSetExponent(decQuad *, decContext *, int32_t);
+ extern void decQuadShow(const decQuad *, const char *);
+ extern int32_t decQuadToBCD(const decQuad *, int32_t *, uint8_t *);
+ extern char * decQuadToEngString(const decQuad *, char *);
+ extern int32_t decQuadToInt32(const decQuad *, decContext *, enum rounding);
+ extern int32_t decQuadToInt32Exact(const decQuad *, decContext *, enum rounding);
+ extern int32_t decQuadToPacked(const decQuad *, int32_t *, uint8_t *);
+ extern char * decQuadToString(const decQuad *, char *);
+ extern uint32_t decQuadToUInt32(const decQuad *, decContext *, enum rounding);
+ extern uint32_t decQuadToUInt32Exact(const decQuad *, decContext *, enum rounding);
+ extern decQuad * decQuadZero(decQuad *);
+
+ /* Computational (result is a decQuad) */
+ extern decQuad * decQuadAbs(decQuad *, const decQuad *, decContext *);
+ extern decQuad * decQuadAdd(decQuad *, const decQuad *, const decQuad *, decContext *);
+ extern decQuad * decQuadAnd(decQuad *, const decQuad *, const decQuad *, decContext *);
+ extern decQuad * decQuadDivide(decQuad *, const decQuad *, const decQuad *, decContext *);
+ extern decQuad * decQuadDivideInteger(decQuad *, const decQuad *, const decQuad *, decContext *);
+ extern decQuad * decQuadFMA(decQuad *, const decQuad *, const decQuad *, const decQuad *, decContext *);
+ extern decQuad * decQuadInvert(decQuad *, const decQuad *, decContext *);
+ extern decQuad * decQuadLogB(decQuad *, const decQuad *, decContext *);
+ extern decQuad * decQuadMax(decQuad *, const decQuad *, const decQuad *, decContext *);
+ extern decQuad * decQuadMaxMag(decQuad *, const decQuad *, const decQuad *, decContext *);
+ extern decQuad * decQuadMin(decQuad *, const decQuad *, const decQuad *, decContext *);
+ extern decQuad * decQuadMinMag(decQuad *, const decQuad *, const decQuad *, decContext *);
+ extern decQuad * decQuadMinus(decQuad *, const decQuad *, decContext *);
+ extern decQuad * decQuadMultiply(decQuad *, const decQuad *, const decQuad *, decContext *);
+ extern decQuad * decQuadNextMinus(decQuad *, const decQuad *, decContext *);
+ extern decQuad * decQuadNextPlus(decQuad *, const decQuad *, decContext *);
+ extern decQuad * decQuadNextToward(decQuad *, const decQuad *, const decQuad *, decContext *);
+ extern decQuad * decQuadOr(decQuad *, const decQuad *, const decQuad *, decContext *);
+ extern decQuad * decQuadPlus(decQuad *, const decQuad *, decContext *);
+ extern decQuad * decQuadQuantize(decQuad *, const decQuad *, const decQuad *, decContext *);
+ extern decQuad * decQuadReduce(decQuad *, const decQuad *, decContext *);
+ extern decQuad * decQuadRemainder(decQuad *, const decQuad *, const decQuad *, decContext *);
+ extern decQuad * decQuadRemainderNear(decQuad *, const decQuad *, const decQuad *, decContext *);
+ extern decQuad * decQuadRotate(decQuad *, const decQuad *, const decQuad *, decContext *);
+ extern decQuad * decQuadScaleB(decQuad *, const decQuad *, const decQuad *, decContext *);
+ extern decQuad * decQuadShift(decQuad *, const decQuad *, const decQuad *, decContext *);
+ extern decQuad * decQuadSubtract(decQuad *, const decQuad *, const decQuad *, decContext *);
+ extern decQuad * decQuadToIntegralValue(decQuad *, const decQuad *, decContext *, enum rounding);
+ extern decQuad * decQuadToIntegralExact(decQuad *, const decQuad *, decContext *);
+ extern decQuad * decQuadXor(decQuad *, const decQuad *, const decQuad *, decContext *);
+
+ /* Comparisons */
+ extern decQuad * decQuadCompare(decQuad *, const decQuad *, const decQuad *, decContext *);
+ extern decQuad * decQuadCompareSignal(decQuad *, const decQuad *, const decQuad *, decContext *);
+ extern decQuad * decQuadCompareTotal(decQuad *, const decQuad *, const decQuad *);
+ extern decQuad * decQuadCompareTotalMag(decQuad *, const decQuad *, const decQuad *);
+
+ /* Copies */
+ extern decQuad * decQuadCanonical(decQuad *, const decQuad *);
+ extern decQuad * decQuadCopy(decQuad *, const decQuad *);
+ extern decQuad * decQuadCopyAbs(decQuad *, const decQuad *);
+ extern decQuad * decQuadCopyNegate(decQuad *, const decQuad *);
+ extern decQuad * decQuadCopySign(decQuad *, const decQuad *, const decQuad *);
+
+ /* Non-computational */
+ extern enum decClass decQuadClass(const decQuad *);
+ extern const char * decQuadClassString(const decQuad *);
+ extern uint32_t decQuadDigits(const decQuad *);
+ extern uint32_t decQuadIsCanonical(const decQuad *);
+ extern uint32_t decQuadIsFinite(const decQuad *);
+ extern uint32_t decQuadIsInteger(const decQuad *);
+ extern uint32_t decQuadIsInfinite(const decQuad *);
+ extern uint32_t decQuadIsNaN(const decQuad *);
+ extern uint32_t decQuadIsNormal(const decQuad *);
+ extern uint32_t decQuadIsSignaling(const decQuad *);
+ extern uint32_t decQuadIsSignalling(const decQuad *);
+ extern uint32_t decQuadIsSigned(const decQuad *);
+ extern uint32_t decQuadIsSubnormal(const decQuad *);
+ extern uint32_t decQuadIsZero(const decQuad *);
+ extern uint32_t decQuadRadix(const decQuad *);
+ extern uint32_t decQuadSameQuantum(const decQuad *, const decQuad *);
+ extern const char * decQuadVersion(void);
+
+ /* decNumber conversions; these are implemented as macros so as not */
+ /* to force a dependency on decimal128 and decNumber in decQuad. */
+ #define decQuadToNumber(dq, dn) decimal128ToNumber((decimal128 *)(dq), dn)
+ #define decQuadFromNumber(dq, dn, set) (decQuad *)decimal128FromNumber((decimal128 *)(dq), dn, set)
+
+#endif
diff --git a/libdecnumber/decQuadSymbols.h b/libdecnumber/decQuadSymbols.h
new file mode 100644
index 0000000..5f614d4
--- /dev/null
+++ b/libdecnumber/decQuadSymbols.h
@@ -0,0 +1,82 @@
+#if !defined(DECQUADSYMBOLS)
+#define DECQUADSYMBOLS
+
+#ifdef IN_LIBGCC2
+#define decQuadAbs __decQuadAbs
+#define decQuadAdd __decQuadAdd
+#define decQuadAnd __decQuadAnd
+#define decQuadCanonical __decQuadCanonical
+#define decQuadClass __decQuadClass
+#define decQuadClassString __decQuadClassString
+#define decQuadCompare __decQuadCompare
+#define decQuadCompareSignal __decQuadCompareSignal
+#define decQuadCompareTotal __decQuadCompareTotal
+#define decQuadCompareTotalMag __decQuadCompareTotalMag
+#define decQuadCopy __decQuadCopy
+#define decQuadCopyAbs __decQuadCopyAbs
+#define decQuadCopyNegate __decQuadCopyNegate
+#define decQuadCopySign __decQuadCopySign
+#define decQuadDigits __decQuadDigits
+#define decQuadDivide __decQuadDivide
+#define decQuadDivideInteger __decQuadDivideInteger
+#define decQuadFMA __decQuadFMA
+#define decQuadFromBCD __decQuadFromBCD
+#define decQuadFromInt32 __decQuadFromInt32
+#define decQuadFromPacked __decQuadFromPacked
+#define decQuadFromString __decQuadFromString
+#define decQuadFromUInt32 __decQuadFromUInt32
+#define decQuadGetCoefficient __decQuadGetCoefficient
+#define decQuadGetExponent __decQuadGetExponent
+#define decQuadInvert __decQuadInvert
+#define decQuadIsCanonical __decQuadIsCanonical
+#define decQuadIsFinite __decQuadIsFinite
+#define decQuadIsInfinite __decQuadIsInfinite
+#define decQuadIsInteger __decQuadIsInteger
+#define decQuadIsNaN __decQuadIsNaN
+#define decQuadIsNormal __decQuadIsNormal
+#define decQuadIsSignaling __decQuadIsSignaling
+#define decQuadIsSignalling __decQuadIsSignalling
+#define decQuadIsSigned __decQuadIsSigned
+#define decQuadIsSubnormal __decQuadIsSubnormal
+#define decQuadIsZero __decQuadIsZero
+#define decQuadLogB __decQuadLogB
+#define decQuadMax __decQuadMax
+#define decQuadMaxMag __decQuadMaxMag
+#define decQuadMin __decQuadMin
+#define decQuadMinMag __decQuadMinMag
+#define decQuadMinus __decQuadMinus
+#define decQuadMultiply __decQuadMultiply
+#define decQuadNextMinus __decQuadNextMinus
+#define decQuadNextPlus __decQuadNextPlus
+#define decQuadNextToward __decQuadNextToward
+#define decQuadOr __decQuadOr
+#define decQuadPlus __decQuadPlus
+#define decQuadQuantize __decQuadQuantize
+#define decQuadRadix __decQuadRadix
+#define decQuadReduce __decQuadReduce
+#define decQuadRemainder __decQuadRemainder
+#define decQuadRemainderNear __decQuadRemainderNear
+#define decQuadRotate __decQuadRotate
+#define decQuadSameQuantum __decQuadSameQuantum
+#define decQuadScaleB __decQuadScaleB
+#define decQuadSetCoefficient __decQuadSetCoefficient
+#define decQuadSetExponent __decQuadSetExponent
+#define decQuadShift __decQuadShift
+#define decQuadShow __decQuadShow
+#define decQuadSubtract __decQuadSubtract
+#define decQuadToBCD __decQuadToBCD
+#define decQuadToEngString __decQuadToEngString
+#define decQuadToInt32 __decQuadToInt32
+#define decQuadToInt32Exact __decQuadToInt32Exact
+#define decQuadToIntegralExact __decQuadToIntegralExact
+#define decQuadToIntegralValue __decQuadToIntegralValue
+#define decQuadToPacked __decQuadToPacked
+#define decQuadToString __decQuadToString
+#define decQuadToUInt32 __decQuadToUInt32
+#define decQuadToUInt32Exact __decQuadToUInt32Exact
+#define decQuadVersion __decQuadVersion
+#define decQuadXor __decQuadXor
+#define decQuadZero __decQuadZero
+#endif
+
+#endif
diff --git a/libdecnumber/decRound.c b/libdecnumber/decRound.c
new file mode 100644
index 0000000..6e51eb6
--- /dev/null
+++ b/libdecnumber/decRound.c
@@ -0,0 +1,102 @@
+/* Internal testing support for rounding for decimal float.
+
+ Copyright (C) 2005, 2006 Free Software Foundation, Inc.
+
+ This file is part of GCC.
+
+ GCC is free software; you can redistribute it and/or modify it
+ under the terms of the GNU General Public License as published by
+ the Free Software Foundation; either version 2, or (at your option)
+ any later version.
+
+ In addition to the permissions in the GNU General Public License,
+ the Free Software Foundation gives you unlimited permission to link
+ the compiled version of this file into combinations with other
+ programs, and to distribute those combinations without any
+ restriction coming from the use of this file. (The General Public
+ License restrictions do apply in other respects; for example, they
+ cover modification of the file, and distribution when not linked
+ into a combine executable.)
+
+ GCC is distributed in the hope that it will be useful, but WITHOUT
+ ANY WARRANTY; without even the implied warranty of MERCHANTABILITY
+ or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public
+ License for more details.
+
+ You should have received a copy of the GNU General Public License
+ along with GCC; see the file COPYING. If not, write to the Free
+ Software Foundation, 51 Franklin Street, Fifth Floor, Boston, MA
+ 02110-1301, USA. */
+
+#include "config.h"
+#include "decContext.h"
+#include "decRound.h"
+
+/* Internal, non-documented functions for testing libgcc functions.
+ This support is not sufficient for application use. */
+
+#define FE_DEC_DOWNWARD 0
+#define FE_DEC_TONEAREST 1
+#define FE_DEC_TONEARESTFROMZERO 2
+#define FE_DEC_TOWARDZERO 3
+#define FE_DEC_UPWARD 4
+#define FE_DEC_MAX 5
+
+static enum rounding __dfp_rounding_mode = DEC_ROUND_HALF_EVEN;
+
+/* Set the decNumber rounding mode from the FE_DEC_* value in MODE. */
+
+void
+__dfp_set_round (int mode)
+{
+ switch (mode)
+ {
+ case FE_DEC_DOWNWARD:
+ __dfp_rounding_mode = DEC_ROUND_FLOOR; break;
+ case FE_DEC_TONEAREST:
+ __dfp_rounding_mode = DEC_ROUND_HALF_EVEN; break;
+ case FE_DEC_TONEARESTFROMZERO:
+ __dfp_rounding_mode = DEC_ROUND_HALF_UP; break;
+ case FE_DEC_TOWARDZERO:
+ __dfp_rounding_mode = DEC_ROUND_DOWN; break;
+ case FE_DEC_UPWARD:
+ __dfp_rounding_mode = DEC_ROUND_CEILING; break;
+ default:
+ /* We can't use assert in libgcc, so just return the default mode. */
+ __dfp_rounding_mode = DEC_ROUND_HALF_EVEN; break;
+ }
+}
+
+/* Return the decNumber rounding mode as an FE_DEC_* value. */
+
+int
+__dfp_get_round (void)
+{
+ int mode;
+
+ switch (__dfp_rounding_mode)
+ {
+ case DEC_ROUND_FLOOR:
+ mode = FE_DEC_DOWNWARD; break;
+ case DEC_ROUND_HALF_EVEN:
+ mode = FE_DEC_TONEAREST; break;
+ case DEC_ROUND_HALF_UP:
+ mode = FE_DEC_TONEARESTFROMZERO; break;
+ case DEC_ROUND_DOWN:
+ mode = FE_DEC_TOWARDZERO; break;
+ case DEC_ROUND_CEILING:
+ mode = FE_DEC_UPWARD; break;
+ default:
+ /* We shouldn't get here, but can't use assert in libgcc. */
+ mode = -1;
+ }
+ return mode;
+}
+
+/* Return the decNumber version of the current rounding mode. */
+
+enum rounding
+__decGetRound (void)
+{
+ return __dfp_rounding_mode;
+}
diff --git a/libdecnumber/decRound.h b/libdecnumber/decRound.h
new file mode 100644
index 0000000..5d2781e
--- /dev/null
+++ b/libdecnumber/decRound.h
@@ -0,0 +1,37 @@
+/* Internal testing support for rounding for decimal float.
+
+ Copyright (C) 2006 Free Software Foundation, Inc.
+
+ This file is part of GCC.
+
+ GCC is free software; you can redistribute it and/or modify it
+ under the terms of the GNU General Public License as published by
+ the Free Software Foundation; either version 2, or (at your option)
+ any later version.
+
+ In addition to the permissions in the GNU General Public License,
+ the Free Software Foundation gives you unlimited permission to link
+ the compiled version of this file into combinations with other
+ programs, and to distribute those combinations without any
+ restriction coming from the use of this file. (The General Public
+ License restrictions do apply in other respects; for example, they
+ cover modification of the file, and distribution when not linked
+ into a combine executable.)
+
+ GCC is distributed in the hope that it will be useful, but WITHOUT
+ ANY WARRANTY; without even the implied warranty of MERCHANTABILITY
+ or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public
+ License for more details.
+
+ You should have received a copy of the GNU General Public License
+ along with GCC; see the file COPYING. If not, write to the Free
+ Software Foundation, 51 Franklin Street, Fifth Floor, Boston, MA
+ 02110-1301, USA. */
+
+#include "decContext.h"
+
+#define DFP_INIT_ROUNDMODE(A) A = __decGetRound()
+
+extern void __dfp_set_round (int);
+extern int __dfp_get_round (void);
+extern enum rounding __decGetRound (void);
diff --git a/libdecnumber/decSingle.c b/libdecnumber/decSingle.c
new file mode 100644
index 0000000..1123959
--- /dev/null
+++ b/libdecnumber/decSingle.c
@@ -0,0 +1,85 @@
+/* decSingle module for the decNumber C Library.
+ Copyright (C) 2007 Free Software Foundation, Inc.
+ Contributed by IBM Corporation. Author Mike Cowlishaw.
+
+ This file is part of GCC.
+
+ GCC is free software; you can redistribute it and/or modify it under
+ the terms of the GNU General Public License as published by the Free
+ Software Foundation; either version 2, or (at your option) any later
+ version.
+
+ In addition to the permissions in the GNU General Public License,
+ the Free Software Foundation gives you unlimited permission to link
+ the compiled version of this file into combinations with other
+ programs, and to distribute those combinations without any
+ restriction coming from the use of this file. (The General Public
+ License restrictions do apply in other respects; for example, they
+ cover modification of the file, and distribution when not linked
+ into a combine executable.)
+
+ GCC is distributed in the hope that it will be useful, but WITHOUT ANY
+ WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
+ for more details.
+
+ You should have received a copy of the GNU General Public License
+ along with GCC; see the file COPYING. If not, write to the Free
+ Software Foundation, 51 Franklin Street, Fifth Floor, Boston, MA
+ 02110-1301, USA. */
+
+/* ------------------------------------------------------------------ */
+/* decSingle.c -- decSingle operations module */
+/* ------------------------------------------------------------------ */
+/* This module comprises decSingle operations (including conversions) */
+/* ------------------------------------------------------------------ */
+
+#include "decContext.h" /* public includes */
+#include "decSingle.h" /* public includes */
+
+/* Constant mappings for shared code */
+#define DECPMAX DECSINGLE_Pmax
+#define DECEMIN DECSINGLE_Emin
+#define DECEMAX DECSINGLE_Emax
+#define DECEMAXD DECSINGLE_EmaxD
+#define DECBYTES DECSINGLE_Bytes
+#define DECSTRING DECSINGLE_String
+#define DECECONL DECSINGLE_EconL
+#define DECBIAS DECSINGLE_Bias
+#define DECLETS DECSINGLE_Declets
+#define DECQTINY (-DECSINGLE_Bias)
+/* parameters of next-wider format */
+#define DECWBYTES DECDOUBLE_Bytes
+#define DECWPMAX DECDOUBLE_Pmax
+#define DECWECONL DECDOUBLE_EconL
+#define DECWBIAS DECDOUBLE_Bias
+
+/* Type and function mappings for shared code */
+#define decFloat decSingle /* Type name */
+#define decFloatWider decDouble /* Type name */
+
+/* Utility (binary results, extractors, etc.) */
+#define decFloatFromBCD decSingleFromBCD
+#define decFloatFromPacked decSingleFromPacked
+#define decFloatFromString decSingleFromString
+#define decFloatFromWider decSingleFromWider
+#define decFloatGetCoefficient decSingleGetCoefficient
+#define decFloatGetExponent decSingleGetExponent
+#define decFloatSetCoefficient decSingleSetCoefficient
+#define decFloatSetExponent decSingleSetExponent
+#define decFloatShow decSingleShow
+#define decFloatToBCD decSingleToBCD
+#define decFloatToEngString decSingleToEngString
+#define decFloatToPacked decSingleToPacked
+#define decFloatToString decSingleToString
+#define decFloatToWider decSingleToWider
+#define decFloatZero decSingleZero
+
+/* Non-computational */
+#define decFloatRadix decSingleRadix
+#define decFloatVersion decSingleVersion
+
+#include "decNumberLocal.h" /* local includes (need DECPMAX) */
+#include "decCommon.c" /* non-basic decFloat routines */
+/* [Do not include decBasic.c for decimal32] */
+
diff --git a/libdecnumber/decSingle.h b/libdecnumber/decSingle.h
new file mode 100644
index 0000000..8dd1bd3
--- /dev/null
+++ b/libdecnumber/decSingle.h
@@ -0,0 +1,101 @@
+/* decSingle module header for the decNumber C Library.
+ Copyright (C) 2005 Free Software Foundation, Inc.
+ Contributed by IBM Corporation. Author Mike Cowlishaw.
+
+ This file is part of GCC.
+
+ GCC is free software; you can redistribute it and/or modify it under
+ the terms of the GNU General Public License as published by the Free
+ Software Foundation; either version 2, or (at your option) any later
+ version.
+
+ In addition to the permissions in the GNU General Public License,
+ the Free Software Foundation gives you unlimited permission to link
+ the compiled version of this file into combinations with other
+ programs, and to distribute those combinations without any
+ restriction coming from the use of this file. (The General Public
+ License restrictions do apply in other respects; for example, they
+ cover modification of the file, and distribution when not linked
+ into a combine executable.)
+
+ GCC is distributed in the hope that it will be useful, but WITHOUT ANY
+ WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
+ for more details.
+
+ You should have received a copy of the GNU General Public License
+ along with GCC; see the file COPYING. If not, write to the Free
+ Software Foundation, 51 Franklin Street, Fifth Floor, Boston, MA
+ 02110-1301, USA. */
+
+/* ------------------------------------------------------------------ */
+/* decSingle.h -- Decimal 32-bit format module header */
+/* ------------------------------------------------------------------ */
+/* Please see decFloats.h for an overview and documentation details. */
+/* ------------------------------------------------------------------ */
+
+#if !defined(DECSINGLE)
+ #define DECSINGLE
+
+ #define DECSINGLENAME "decSingle" /* Short name */
+ #define DECSINGLETITLE "Decimal 32-bit datum" /* Verbose name */
+ #define DECSINGLEAUTHOR "Mike Cowlishaw" /* Who to blame */
+
+ /* parameters for decSingles */
+ #define DECSINGLE_Bytes 4 /* length */
+ #define DECSINGLE_Pmax 7 /* maximum precision (digits) */
+ #define DECSINGLE_Emin -95 /* minimum adjusted exponent */
+ #define DECSINGLE_Emax 96 /* maximum adjusted exponent */
+ #define DECSINGLE_EmaxD 3 /* maximum exponent digits */
+ #define DECSINGLE_Bias 101 /* bias for the exponent */
+ #define DECSINGLE_String 16 /* maximum string length, +1 */
+ #define DECSINGLE_EconL 6 /* exponent continuation length */
+ #define DECSINGLE_Declets 2 /* count of declets */
+ /* highest biased exponent (Elimit-1) */
+ #define DECSINGLE_Ehigh (DECSINGLE_Emax + DECSINGLE_Bias - (DECSINGLE_Pmax-1))
+
+ /* Required includes */
+ #include "decContext.h"
+ #include "decQuad.h"
+ #include "decDouble.h"
+
+ /* The decSingle decimal 32-bit type, accessible by bytes */
+ typedef struct {
+ uint8_t bytes[DECSINGLE_Bytes]; /* fields: 1, 5, 6, 20 bits */
+ } decSingle;
+
+ /* ---------------------------------------------------------------- */
+ /* Routines -- implemented as decFloat routines in common files */
+ /* ---------------------------------------------------------------- */
+
+ #include "decSingleSymbols.h"
+
+ /* Utilities (binary argument(s) or result, extractors, etc.) */
+ extern decSingle * decSingleFromBCD(decSingle *, int32_t, const uint8_t *, int32_t);
+ extern decSingle * decSingleFromPacked(decSingle *, int32_t, const uint8_t *);
+ extern decSingle * decSingleFromString(decSingle *, const char *, decContext *);
+ extern decSingle * decSingleFromWider(decSingle *, const decDouble *, decContext *);
+ extern int32_t decSingleGetCoefficient(const decSingle *, uint8_t *);
+ extern int32_t decSingleGetExponent(const decSingle *);
+ extern decSingle * decSingleSetCoefficient(decSingle *, const uint8_t *, int32_t);
+ extern decSingle * decSingleSetExponent(decSingle *, decContext *, int32_t);
+ extern void decSingleShow(const decSingle *, const char *);
+ extern int32_t decSingleToBCD(const decSingle *, int32_t *, uint8_t *);
+ extern char * decSingleToEngString(const decSingle *, char *);
+ extern int32_t decSingleToPacked(const decSingle *, int32_t *, uint8_t *);
+ extern char * decSingleToString(const decSingle *, char *);
+ extern decDouble * decSingleToWider(const decSingle *, decDouble *);
+ extern decSingle * decSingleZero(decSingle *);
+
+ /* (No Arithmetic routines for decSingle) */
+
+ /* Non-computational */
+ extern uint32_t decSingleRadix(const decSingle *);
+ extern const char * decSingleVersion(void);
+
+ /* decNumber conversions; these are implemented as macros so as not */
+ /* to force a dependency on decimal32 and decNumber in decSingle. */
+ #define decSingleToNumber(dq, dn) decimal32ToNumber((decimal32 *)(dq), dn)
+ #define decSingleFromNumber(dq, dn, set) (decSingle *)decimal32FromNumber((decimal32 *)(dq), dn, set)
+
+#endif
diff --git a/libdecnumber/decSingleSymbols.h b/libdecnumber/decSingleSymbols.h
new file mode 100644
index 0000000..6eee0e5
--- /dev/null
+++ b/libdecnumber/decSingleSymbols.h
@@ -0,0 +1,24 @@
+#if !defined(DECSINGLESYMBOLS)
+#define DECSINGLESYMBOLS
+
+#ifdef IN_LIBGCC2
+#define decSingleFromBCD __decSingleFromBCD
+#define decSingleFromPacked __decSingleFromPacked
+#define decSingleFromString __decSingleFromString
+#define decSingleFromWider __decSingleFromWider
+#define decSingleGetCoefficient __decSingleGetCoefficient
+#define decSingleGetExponent __decSingleGetExponent
+#define decSingleRadix __decSingleRadix
+#define decSingleSetCoefficient __decSingleSetCoefficient
+#define decSingleSetExponent __decSingleSetExponent
+#define decSingleShow __decSingleShow
+#define decSingleToBCD __decSingleToBCD
+#define decSingleToEngString __decSingleToEngString
+#define decSingleToPacked __decSingleToPacked
+#define decSingleToString __decSingleToString
+#define decSingleToWider __decSingleToWider
+#define decSingleVersion __decSingleVersion
+#define decSingleZero __decSingleZero
+#endif
+
+#endif
diff --git a/libdecnumber/dpd/decimal128.c b/libdecnumber/dpd/decimal128.c
new file mode 100644
index 0000000..6aa98b5
--- /dev/null
+++ b/libdecnumber/dpd/decimal128.c
@@ -0,0 +1,570 @@
+/* Decimal 128-bit format module for the decNumber C Library.
+ Copyright (C) 2005, 2007 Free Software Foundation, Inc.
+ Contributed by IBM Corporation. Author Mike Cowlishaw.
+
+ This file is part of GCC.
+
+ GCC is free software; you can redistribute it and/or modify it under
+ the terms of the GNU General Public License as published by the Free
+ Software Foundation; either version 2, or (at your option) any later
+ version.
+
+ In addition to the permissions in the GNU General Public License,
+ the Free Software Foundation gives you unlimited permission to link
+ the compiled version of this file into combinations with other
+ programs, and to distribute those combinations without any
+ restriction coming from the use of this file. (The General Public
+ License restrictions do apply in other respects; for example, they
+ cover modification of the file, and distribution when not linked
+ into a combine executable.)
+
+ GCC is distributed in the hope that it will be useful, but WITHOUT ANY
+ WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
+ for more details.
+
+ You should have received a copy of the GNU General Public License
+ along with GCC; see the file COPYING. If not, write to the Free
+ Software Foundation, 51 Franklin Street, Fifth Floor, Boston, MA
+ 02110-1301, USA. */
+
+/* ------------------------------------------------------------------ */
+/* Decimal 128-bit format module */
+/* ------------------------------------------------------------------ */
+/* This module comprises the routines for decimal128 format numbers. */
+/* Conversions are supplied to and from decNumber and String. */
+/* */
+/* This is used when decNumber provides operations, either for all */
+/* operations or as a proxy between decNumber and decSingle. */
+/* */
+/* Error handling is the same as decNumber (qv.). */
+/* ------------------------------------------------------------------ */
+#include <string.h> /* [for memset/memcpy] */
+#include <stdio.h> /* [for printf] */
+
+#include "config.h" /* GCC definitions */
+#define DECNUMDIGITS 34 /* make decNumbers with space for 34 */
+#include "decNumber.h" /* base number library */
+#include "decNumberLocal.h" /* decNumber local types, etc. */
+#include "decimal128.h" /* our primary include */
+
+/* Utility routines and tables [in decimal64.c] */
+/* DPD2BIN and the reverse are renamed to prevent link-time conflict */
+/* if decQuad is also built in the same executable */
+#define DPD2BIN DPD2BINx
+#define BIN2DPD BIN2DPDx
+extern const uInt COMBEXP[32], COMBMSD[32];
+extern const uShort DPD2BIN[1024];
+extern const uShort BIN2DPD[1000]; /* [not used] */
+extern const uByte BIN2CHAR[4001];
+
+extern void decDigitsFromDPD(decNumber *, const uInt *, Int);
+extern void decDigitsToDPD(const decNumber *, uInt *, Int);
+
+#if DECTRACE || DECCHECK
+void decimal128Show(const decimal128 *); /* for debug */
+extern void decNumberShow(const decNumber *); /* .. */
+#endif
+
+/* Useful macro */
+/* Clear a structure (e.g., a decNumber) */
+#define DEC_clear(d) memset(d, 0, sizeof(*d))
+
+/* ------------------------------------------------------------------ */
+/* decimal128FromNumber -- convert decNumber to decimal128 */
+/* */
+/* ds is the target decimal128 */
+/* dn is the source number (assumed valid) */
+/* set is the context, used only for reporting errors */
+/* */
+/* The set argument is used only for status reporting and for the */
+/* rounding mode (used if the coefficient is more than DECIMAL128_Pmax*/
+/* digits or an overflow is detected). If the exponent is out of the */
+/* valid range then Overflow or Underflow will be raised. */
+/* After Underflow a subnormal result is possible. */
+/* */
+/* DEC_Clamped is set if the number has to be 'folded down' to fit, */
+/* by reducing its exponent and multiplying the coefficient by a */
+/* power of ten, or if the exponent on a zero had to be clamped. */
+/* ------------------------------------------------------------------ */
+decimal128 * decimal128FromNumber(decimal128 *d128, const decNumber *dn,
+ decContext *set) {
+ uInt status=0; /* status accumulator */
+ Int ae; /* adjusted exponent */
+ decNumber dw; /* work */
+ decContext dc; /* .. */
+ uInt *pu; /* .. */
+ uInt comb, exp; /* .. */
+ uInt targar[4]={0,0,0,0}; /* target 128-bit */
+ #define targhi targar[3] /* name the word with the sign */
+ #define targmh targar[2] /* name the words */
+ #define targml targar[1] /* .. */
+ #define targlo targar[0] /* .. */
+
+ /* If the number has too many digits, or the exponent could be */
+ /* out of range then reduce the number under the appropriate */
+ /* constraints. This could push the number to Infinity or zero, */
+ /* so this check and rounding must be done before generating the */
+ /* decimal128] */
+ ae=dn->exponent+dn->digits-1; /* [0 if special] */
+ if (dn->digits>DECIMAL128_Pmax /* too many digits */
+ || ae>DECIMAL128_Emax /* likely overflow */
+ || ae<DECIMAL128_Emin) { /* likely underflow */
+ decContextDefault(&dc, DEC_INIT_DECIMAL128); /* [no traps] */
+ dc.round=set->round; /* use supplied rounding */
+ decNumberPlus(&dw, dn, &dc); /* (round and check) */
+ /* [this changes -0 to 0, so enforce the sign...] */
+ dw.bits|=dn->bits&DECNEG;
+ status=dc.status; /* save status */
+ dn=&dw; /* use the work number */
+ } /* maybe out of range */
+
+ if (dn->bits&DECSPECIAL) { /* a special value */
+ if (dn->bits&DECINF) targhi=DECIMAL_Inf<<24;
+ else { /* sNaN or qNaN */
+ if ((*dn->lsu!=0 || dn->digits>1) /* non-zero coefficient */
+ && (dn->digits<DECIMAL128_Pmax)) { /* coefficient fits */
+ decDigitsToDPD(dn, targar, 0);
+ }
+ if (dn->bits&DECNAN) targhi|=DECIMAL_NaN<<24;
+ else targhi|=DECIMAL_sNaN<<24;
+ } /* a NaN */
+ } /* special */
+
+ else { /* is finite */
+ if (decNumberIsZero(dn)) { /* is a zero */
+ /* set and clamp exponent */
+ if (dn->exponent<-DECIMAL128_Bias) {
+ exp=0; /* low clamp */
+ status|=DEC_Clamped;
+ }
+ else {
+ exp=dn->exponent+DECIMAL128_Bias; /* bias exponent */
+ if (exp>DECIMAL128_Ehigh) { /* top clamp */
+ exp=DECIMAL128_Ehigh;
+ status|=DEC_Clamped;
+ }
+ }
+ comb=(exp>>9) & 0x18; /* msd=0, exp top 2 bits .. */
+ }
+ else { /* non-zero finite number */
+ uInt msd; /* work */
+ Int pad=0; /* coefficient pad digits */
+
+ /* the dn is known to fit, but it may need to be padded */
+ exp=(uInt)(dn->exponent+DECIMAL128_Bias); /* bias exponent */
+ if (exp>DECIMAL128_Ehigh) { /* fold-down case */
+ pad=exp-DECIMAL128_Ehigh;
+ exp=DECIMAL128_Ehigh; /* [to maximum] */
+ status|=DEC_Clamped;
+ }
+
+ /* [fastpath for common case is not a win, here] */
+ decDigitsToDPD(dn, targar, pad);
+ /* save and clear the top digit */
+ msd=targhi>>14;
+ targhi&=0x00003fff;
+
+ /* create the combination field */
+ if (msd>=8) comb=0x18 | ((exp>>11) & 0x06) | (msd & 0x01);
+ else comb=((exp>>9) & 0x18) | msd;
+ }
+ targhi|=comb<<26; /* add combination field .. */
+ targhi|=(exp&0xfff)<<14; /* .. and exponent continuation */
+ } /* finite */
+
+ if (dn->bits&DECNEG) targhi|=0x80000000; /* add sign bit */
+
+ /* now write to storage; this is endian */
+ pu=(uInt *)d128->bytes; /* overlay */
+ if (DECLITEND) {
+ pu[0]=targlo; /* directly store the low int */
+ pu[1]=targml; /* then the mid-low */
+ pu[2]=targmh; /* then the mid-high */
+ pu[3]=targhi; /* then the high int */
+ }
+ else {
+ pu[0]=targhi; /* directly store the high int */
+ pu[1]=targmh; /* then the mid-high */
+ pu[2]=targml; /* then the mid-low */
+ pu[3]=targlo; /* then the low int */
+ }
+
+ if (status!=0) decContextSetStatus(set, status); /* pass on status */
+ /* decimal128Show(d128); */
+ return d128;
+ } /* decimal128FromNumber */
+
+/* ------------------------------------------------------------------ */
+/* decimal128ToNumber -- convert decimal128 to decNumber */
+/* d128 is the source decimal128 */
+/* dn is the target number, with appropriate space */
+/* No error is possible. */
+/* ------------------------------------------------------------------ */
+decNumber * decimal128ToNumber(const decimal128 *d128, decNumber *dn) {
+ uInt msd; /* coefficient MSD */
+ uInt exp; /* exponent top two bits */
+ uInt comb; /* combination field */
+ const uInt *pu; /* work */
+ Int need; /* .. */
+ uInt sourar[4]; /* source 128-bit */
+ #define sourhi sourar[3] /* name the word with the sign */
+ #define sourmh sourar[2] /* and the mid-high word */
+ #define sourml sourar[1] /* and the mod-low word */
+ #define sourlo sourar[0] /* and the lowest word */
+
+ /* load source from storage; this is endian */
+ pu=(const uInt *)d128->bytes; /* overlay */
+ if (DECLITEND) {
+ sourlo=pu[0]; /* directly load the low int */
+ sourml=pu[1]; /* then the mid-low */
+ sourmh=pu[2]; /* then the mid-high */
+ sourhi=pu[3]; /* then the high int */
+ }
+ else {
+ sourhi=pu[0]; /* directly load the high int */
+ sourmh=pu[1]; /* then the mid-high */
+ sourml=pu[2]; /* then the mid-low */
+ sourlo=pu[3]; /* then the low int */
+ }
+
+ comb=(sourhi>>26)&0x1f; /* combination field */
+
+ decNumberZero(dn); /* clean number */
+ if (sourhi&0x80000000) dn->bits=DECNEG; /* set sign if negative */
+
+ msd=COMBMSD[comb]; /* decode the combination field */
+ exp=COMBEXP[comb]; /* .. */
+
+ if (exp==3) { /* is a special */
+ if (msd==0) {
+ dn->bits|=DECINF;
+ return dn; /* no coefficient needed */
+ }
+ else if (sourhi&0x02000000) dn->bits|=DECSNAN;
+ else dn->bits|=DECNAN;
+ msd=0; /* no top digit */
+ }
+ else { /* is a finite number */
+ dn->exponent=(exp<<12)+((sourhi>>14)&0xfff)-DECIMAL128_Bias; /* unbiased */
+ }
+
+ /* get the coefficient */
+ sourhi&=0x00003fff; /* clean coefficient continuation */
+ if (msd) { /* non-zero msd */
+ sourhi|=msd<<14; /* prefix to coefficient */
+ need=12; /* process 12 declets */
+ }
+ else { /* msd=0 */
+ if (sourhi) need=11; /* declets to process */
+ else if (sourmh) need=10;
+ else if (sourml) need=7;
+ else if (sourlo) need=4;
+ else return dn; /* easy: coefficient is 0 */
+ } /*msd=0 */
+
+ decDigitsFromDPD(dn, sourar, need); /* process declets */
+ /* decNumberShow(dn); */
+ return dn;
+ } /* decimal128ToNumber */
+
+/* ------------------------------------------------------------------ */
+/* to-scientific-string -- conversion to numeric string */
+/* to-engineering-string -- conversion to numeric string */
+/* */
+/* decimal128ToString(d128, string); */
+/* decimal128ToEngString(d128, string); */
+/* */
+/* d128 is the decimal128 format number to convert */
+/* string is the string where the result will be laid out */
+/* */
+/* string must be at least 24 characters */
+/* */
+/* No error is possible, and no status can be set. */
+/* ------------------------------------------------------------------ */
+char * decimal128ToEngString(const decimal128 *d128, char *string){
+ decNumber dn; /* work */
+ decimal128ToNumber(d128, &dn);
+ decNumberToEngString(&dn, string);
+ return string;
+ } /* decimal128ToEngString */
+
+char * decimal128ToString(const decimal128 *d128, char *string){
+ uInt msd; /* coefficient MSD */
+ Int exp; /* exponent top two bits or full */
+ uInt comb; /* combination field */
+ char *cstart; /* coefficient start */
+ char *c; /* output pointer in string */
+ const uInt *pu; /* work */
+ char *s, *t; /* .. (source, target) */
+ Int dpd; /* .. */
+ Int pre, e; /* .. */
+ const uByte *u; /* .. */
+
+ uInt sourar[4]; /* source 128-bit */
+ #define sourhi sourar[3] /* name the word with the sign */
+ #define sourmh sourar[2] /* and the mid-high word */
+ #define sourml sourar[1] /* and the mod-low word */
+ #define sourlo sourar[0] /* and the lowest word */
+
+ /* load source from storage; this is endian */
+ pu=(const uInt *)d128->bytes; /* overlay */
+ if (DECLITEND) {
+ sourlo=pu[0]; /* directly load the low int */
+ sourml=pu[1]; /* then the mid-low */
+ sourmh=pu[2]; /* then the mid-high */
+ sourhi=pu[3]; /* then the high int */
+ }
+ else {
+ sourhi=pu[0]; /* directly load the high int */
+ sourmh=pu[1]; /* then the mid-high */
+ sourml=pu[2]; /* then the mid-low */
+ sourlo=pu[3]; /* then the low int */
+ }
+
+ c=string; /* where result will go */
+ if (((Int)sourhi)<0) *c++='-'; /* handle sign */
+
+ comb=(sourhi>>26)&0x1f; /* combination field */
+ msd=COMBMSD[comb]; /* decode the combination field */
+ exp=COMBEXP[comb]; /* .. */
+
+ if (exp==3) {
+ if (msd==0) { /* infinity */
+ strcpy(c, "Inf");
+ strcpy(c+3, "inity");
+ return string; /* easy */
+ }
+ if (sourhi&0x02000000) *c++='s'; /* sNaN */
+ strcpy(c, "NaN"); /* complete word */
+ c+=3; /* step past */
+ if (sourlo==0 && sourml==0 && sourmh==0
+ && (sourhi&0x0003ffff)==0) return string; /* zero payload */
+ /* otherwise drop through to add integer; set correct exp */
+ exp=0; msd=0; /* setup for following code */
+ }
+ else exp=(exp<<12)+((sourhi>>14)&0xfff)-DECIMAL128_Bias; /* unbiased */
+
+ /* convert 34 digits of significand to characters */
+ cstart=c; /* save start of coefficient */
+ if (msd) *c++='0'+(char)msd; /* non-zero most significant digit */
+
+ /* Now decode the declets. After extracting each one, it is */
+ /* decoded to binary and then to a 4-char sequence by table lookup; */
+ /* the 4-chars are a 1-char length (significant digits, except 000 */
+ /* has length 0). This allows us to left-align the first declet */
+ /* with non-zero content, then remaining ones are full 3-char */
+ /* length. We use fixed-length memcpys because variable-length */
+ /* causes a subroutine call in GCC. (These are length 4 for speed */
+ /* and are safe because the array has an extra terminator byte.) */
+ #define dpd2char u=&BIN2CHAR[DPD2BIN[dpd]*4]; \
+ if (c!=cstart) {memcpy(c, u+1, 4); c+=3;} \
+ else if (*u) {memcpy(c, u+4-*u, 4); c+=*u;}
+ dpd=(sourhi>>4)&0x3ff; /* declet 1 */
+ dpd2char;
+ dpd=((sourhi&0xf)<<6) | (sourmh>>26); /* declet 2 */
+ dpd2char;
+ dpd=(sourmh>>16)&0x3ff; /* declet 3 */
+ dpd2char;
+ dpd=(sourmh>>6)&0x3ff; /* declet 4 */
+ dpd2char;
+ dpd=((sourmh&0x3f)<<4) | (sourml>>28); /* declet 5 */
+ dpd2char;
+ dpd=(sourml>>18)&0x3ff; /* declet 6 */
+ dpd2char;
+ dpd=(sourml>>8)&0x3ff; /* declet 7 */
+ dpd2char;
+ dpd=((sourml&0xff)<<2) | (sourlo>>30); /* declet 8 */
+ dpd2char;
+ dpd=(sourlo>>20)&0x3ff; /* declet 9 */
+ dpd2char;
+ dpd=(sourlo>>10)&0x3ff; /* declet 10 */
+ dpd2char;
+ dpd=(sourlo)&0x3ff; /* declet 11 */
+ dpd2char;
+
+ if (c==cstart) *c++='0'; /* all zeros -- make 0 */
+
+ if (exp==0) { /* integer or NaN case -- easy */
+ *c='\0'; /* terminate */
+ return string;
+ }
+
+ /* non-0 exponent */
+ e=0; /* assume no E */
+ pre=c-cstart+exp;
+ /* [here, pre-exp is the digits count (==1 for zero)] */
+ if (exp>0 || pre<-5) { /* need exponential form */
+ e=pre-1; /* calculate E value */
+ pre=1; /* assume one digit before '.' */
+ } /* exponential form */
+
+ /* modify the coefficient, adding 0s, '.', and E+nn as needed */
+ s=c-1; /* source (LSD) */
+ if (pre>0) { /* ddd.ddd (plain), perhaps with E */
+ char *dotat=cstart+pre;
+ if (dotat<c) { /* if embedded dot needed... */
+ t=c; /* target */
+ for (; s>=dotat; s--, t--) *t=*s; /* open the gap; leave t at gap */
+ *t='.'; /* insert the dot */
+ c++; /* length increased by one */
+ }
+
+ /* finally add the E-part, if needed; it will never be 0, and has */
+ /* a maximum length of 4 digits */
+ if (e!=0) {
+ *c++='E'; /* starts with E */
+ *c++='+'; /* assume positive */
+ if (e<0) {
+ *(c-1)='-'; /* oops, need '-' */
+ e=-e; /* uInt, please */
+ }
+ if (e<1000) { /* 3 (or fewer) digits case */
+ u=&BIN2CHAR[e*4]; /* -> length byte */
+ memcpy(c, u+4-*u, 4); /* copy fixed 4 characters [is safe] */
+ c+=*u; /* bump pointer appropriately */
+ }
+ else { /* 4-digits */
+ Int thou=((e>>3)*1049)>>17; /* e/1000 */
+ Int rem=e-(1000*thou); /* e%1000 */
+ *c++='0'+(char)thou;
+ u=&BIN2CHAR[rem*4]; /* -> length byte */
+ memcpy(c, u+1, 4); /* copy fixed 3+1 characters [is safe] */
+ c+=3; /* bump pointer, always 3 digits */
+ }
+ }
+ *c='\0'; /* add terminator */
+ /*printf("res %s\n", string); */
+ return string;
+ } /* pre>0 */
+
+ /* -5<=pre<=0: here for plain 0.ddd or 0.000ddd forms (can never have E) */
+ t=c+1-pre;
+ *(t+1)='\0'; /* can add terminator now */
+ for (; s>=cstart; s--, t--) *t=*s; /* shift whole coefficient right */
+ c=cstart;
+ *c++='0'; /* always starts with 0. */
+ *c++='.';
+ for (; pre<0; pre++) *c++='0'; /* add any 0's after '.' */
+ /*printf("res %s\n", string); */
+ return string;
+ } /* decimal128ToString */
+
+/* ------------------------------------------------------------------ */
+/* to-number -- conversion from numeric string */
+/* */
+/* decimal128FromString(result, string, set); */
+/* */
+/* result is the decimal128 format number which gets the result of */
+/* the conversion */
+/* *string is the character string which should contain a valid */
+/* number (which may be a special value) */
+/* set is the context */
+/* */
+/* The context is supplied to this routine is used for error handling */
+/* (setting of status and traps) and for the rounding mode, only. */
+/* If an error occurs, the result will be a valid decimal128 NaN. */
+/* ------------------------------------------------------------------ */
+decimal128 * decimal128FromString(decimal128 *result, const char *string,
+ decContext *set) {
+ decContext dc; /* work */
+ decNumber dn; /* .. */
+
+ decContextDefault(&dc, DEC_INIT_DECIMAL128); /* no traps, please */
+ dc.round=set->round; /* use supplied rounding */
+
+ decNumberFromString(&dn, string, &dc); /* will round if needed */
+ decimal128FromNumber(result, &dn, &dc);
+ if (dc.status!=0) { /* something happened */
+ decContextSetStatus(set, dc.status); /* .. pass it on */
+ }
+ return result;
+ } /* decimal128FromString */
+
+/* ------------------------------------------------------------------ */
+/* decimal128IsCanonical -- test whether encoding is canonical */
+/* d128 is the source decimal128 */
+/* returns 1 if the encoding of d128 is canonical, 0 otherwise */
+/* No error is possible. */
+/* ------------------------------------------------------------------ */
+uint32_t decimal128IsCanonical(const decimal128 *d128) {
+ decNumber dn; /* work */
+ decimal128 canon; /* .. */
+ decContext dc; /* .. */
+ decContextDefault(&dc, DEC_INIT_DECIMAL128);
+ decimal128ToNumber(d128, &dn);
+ decimal128FromNumber(&canon, &dn, &dc);/* canon will now be canonical */
+ return memcmp(d128, &canon, DECIMAL128_Bytes)==0;
+ } /* decimal128IsCanonical */
+
+/* ------------------------------------------------------------------ */
+/* decimal128Canonical -- copy an encoding, ensuring it is canonical */
+/* d128 is the source decimal128 */
+/* result is the target (may be the same decimal128) */
+/* returns result */
+/* No error is possible. */
+/* ------------------------------------------------------------------ */
+decimal128 * decimal128Canonical(decimal128 *result, const decimal128 *d128) {
+ decNumber dn; /* work */
+ decContext dc; /* .. */
+ decContextDefault(&dc, DEC_INIT_DECIMAL128);
+ decimal128ToNumber(d128, &dn);
+ decimal128FromNumber(result, &dn, &dc);/* result will now be canonical */
+ return result;
+ } /* decimal128Canonical */
+
+#if DECTRACE || DECCHECK
+/* Macros for accessing decimal128 fields. These assume the argument
+ is a reference (pointer) to the decimal128 structure, and the
+ decimal128 is in network byte order (big-endian) */
+/* Get sign */
+#define decimal128Sign(d) ((unsigned)(d)->bytes[0]>>7)
+
+/* Get combination field */
+#define decimal128Comb(d) (((d)->bytes[0] & 0x7c)>>2)
+
+/* Get exponent continuation [does not remove bias] */
+#define decimal128ExpCon(d) ((((d)->bytes[0] & 0x03)<<10) \
+ | ((unsigned)(d)->bytes[1]<<2) \
+ | ((unsigned)(d)->bytes[2]>>6))
+
+/* Set sign [this assumes sign previously 0] */
+#define decimal128SetSign(d, b) { \
+ (d)->bytes[0]|=((unsigned)(b)<<7);}
+
+/* Set exponent continuation [does not apply bias] */
+/* This assumes range has been checked and exponent previously 0; */
+/* type of exponent must be unsigned */
+#define decimal128SetExpCon(d, e) { \
+ (d)->bytes[0]|=(uint8_t)((e)>>10); \
+ (d)->bytes[1] =(uint8_t)(((e)&0x3fc)>>2); \
+ (d)->bytes[2]|=(uint8_t)(((e)&0x03)<<6);}
+
+/* ------------------------------------------------------------------ */
+/* decimal128Show -- display a decimal128 in hexadecimal [debug aid] */
+/* d128 -- the number to show */
+/* ------------------------------------------------------------------ */
+/* Also shows sign/cob/expconfields extracted */
+void decimal128Show(const decimal128 *d128) {
+ char buf[DECIMAL128_Bytes*2+1];
+ Int i, j=0;
+
+ if (DECLITEND) {
+ for (i=0; i<DECIMAL128_Bytes; i++, j+=2) {
+ sprintf(&buf[j], "%02x", d128->bytes[15-i]);
+ }
+ printf(" D128> %s [S:%d Cb:%02x Ec:%02x] LittleEndian\n", buf,
+ d128->bytes[15]>>7, (d128->bytes[15]>>2)&0x1f,
+ ((d128->bytes[15]&0x3)<<10)|(d128->bytes[14]<<2)|
+ (d128->bytes[13]>>6));
+ }
+ else {
+ for (i=0; i<DECIMAL128_Bytes; i++, j+=2) {
+ sprintf(&buf[j], "%02x", d128->bytes[i]);
+ }
+ printf(" D128> %s [S:%d Cb:%02x Ec:%02x] BigEndian\n", buf,
+ decimal128Sign(d128), decimal128Comb(d128),
+ decimal128ExpCon(d128));
+ }
+ } /* decimal128Show */
+#endif
diff --git a/libdecnumber/dpd/decimal128.h b/libdecnumber/dpd/decimal128.h
new file mode 100644
index 0000000..f8f5b5a
--- /dev/null
+++ b/libdecnumber/dpd/decimal128.h
@@ -0,0 +1,101 @@
+/* Decimal 128-bit format module header for the decNumber C Library.
+ Copyright (C) 2005, 2007 Free Software Foundation, Inc.
+ Contributed by IBM Corporation. Author Mike Cowlishaw.
+
+ This file is part of GCC.
+
+ GCC is free software; you can redistribute it and/or modify it under
+ the terms of the GNU General Public License as published by the Free
+ Software Foundation; either version 2, or (at your option) any later
+ version.
+
+ In addition to the permissions in the GNU General Public License,
+ the Free Software Foundation gives you unlimited permission to link
+ the compiled version of this file into combinations with other
+ programs, and to distribute those combinations without any
+ restriction coming from the use of this file. (The General Public
+ License restrictions do apply in other respects; for example, they
+ cover modification of the file, and distribution when not linked
+ into a combine executable.)
+
+ GCC is distributed in the hope that it will be useful, but WITHOUT ANY
+ WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
+ for more details.
+
+ You should have received a copy of the GNU General Public License
+ along with GCC; see the file COPYING. If not, write to the Free
+ Software Foundation, 51 Franklin Street, Fifth Floor, Boston, MA
+ 02110-1301, USA. */
+
+/* ------------------------------------------------------------------ */
+/* Decimal 128-bit format module header */
+/* ------------------------------------------------------------------ */
+
+#if !defined(DECIMAL128)
+ #define DECIMAL128
+ #define DEC128NAME "decimal128" /* Short name */
+ #define DEC128FULLNAME "Decimal 128-bit Number" /* Verbose name */
+ #define DEC128AUTHOR "Mike Cowlishaw" /* Who to blame */
+
+ /* parameters for decimal128s */
+ #define DECIMAL128_Bytes 16 /* length */
+ #define DECIMAL128_Pmax 34 /* maximum precision (digits) */
+ #define DECIMAL128_Emax 6144 /* maximum adjusted exponent */
+ #define DECIMAL128_Emin -6143 /* minimum adjusted exponent */
+ #define DECIMAL128_Bias 6176 /* bias for the exponent */
+ #define DECIMAL128_String 43 /* maximum string length, +1 */
+ #define DECIMAL128_EconL 12 /* exp. continuation length */
+ /* highest biased exponent (Elimit-1) */
+ #define DECIMAL128_Ehigh (DECIMAL128_Emax+DECIMAL128_Bias-DECIMAL128_Pmax+1)
+
+ /* check enough digits, if pre-defined */
+ #if defined(DECNUMDIGITS)
+ #if (DECNUMDIGITS<DECIMAL128_Pmax)
+ #error decimal128.h needs pre-defined DECNUMDIGITS>=34 for safe use
+ #endif
+ #endif
+
+ #ifndef DECNUMDIGITS
+ #define DECNUMDIGITS DECIMAL128_Pmax /* size if not already defined*/
+ #endif
+ #ifndef DECNUMBER
+ #include "decNumber.h" /* context and number library */
+ #endif
+
+ /* Decimal 128-bit type, accessible by bytes */
+ typedef struct {
+ uint8_t bytes[DECIMAL128_Bytes]; /* decimal128: 1, 5, 12, 110 bits*/
+ } decimal128;
+
+ /* special values [top byte excluding sign bit; last two bits are */
+ /* don't-care for Infinity on input, last bit don't-care for NaN] */
+ #if !defined(DECIMAL_NaN)
+ #define DECIMAL_NaN 0x7c /* 0 11111 00 NaN */
+ #define DECIMAL_sNaN 0x7e /* 0 11111 10 sNaN */
+ #define DECIMAL_Inf 0x78 /* 0 11110 00 Infinity */
+ #endif
+
+ #include "decimal128Local.h"
+
+ /* ---------------------------------------------------------------- */
+ /* Routines */
+ /* ---------------------------------------------------------------- */
+
+ #include "decimal128Symbols.h"
+
+ /* String conversions */
+ decimal128 * decimal128FromString(decimal128 *, const char *, decContext *);
+ char * decimal128ToString(const decimal128 *, char *);
+ char * decimal128ToEngString(const decimal128 *, char *);
+
+ /* decNumber conversions */
+ decimal128 * decimal128FromNumber(decimal128 *, const decNumber *,
+ decContext *);
+ decNumber * decimal128ToNumber(const decimal128 *, decNumber *);
+
+ /* Format-dependent utilities */
+ uint32_t decimal128IsCanonical(const decimal128 *);
+ decimal128 * decimal128Canonical(decimal128 *, const decimal128 *);
+
+#endif
diff --git a/libdecnumber/dpd/decimal128Local.h b/libdecnumber/dpd/decimal128Local.h
new file mode 100644
index 0000000..b4130b5
--- /dev/null
+++ b/libdecnumber/dpd/decimal128Local.h
@@ -0,0 +1,47 @@
+/* Local definitions for use with the decNumber C Library.
+ Copyright (C) 2007 Free Software Foundation, Inc.
+
+ This file is part of GCC.
+
+ GCC is free software; you can redistribute it and/or modify it under
+ the terms of the GNU General Public License as published by the Free
+ Software Foundation; either version 2, or (at your option) any later
+ version.
+
+ In addition to the permissions in the GNU General Public License,
+ the Free Software Foundation gives you unlimited permission to link
+ the compiled version of this file into combinations with other
+ programs, and to distribute those combinations without any
+ restriction coming from the use of this file. (The General Public
+ License restrictions do apply in other respects; for example, they
+ cover modification of the file, and distribution when not linked
+ into a combine executable.)
+
+ GCC is distributed in the hope that it will be useful, but WITHOUT ANY
+ WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
+ for more details.
+
+ You should have received a copy of the GNU General Public License
+ along with GCC; see the file COPYING. If not, write to the Free
+ Software Foundation, 51 Franklin Street, Fifth Floor, Boston, MA
+ 02110-1301, USA. */
+
+#if !defined(DECIMAL128LOCAL)
+
+/* The compiler needs sign manipulation functions for decimal128 which
+ are not part of the decNumber package. */
+
+/* Set sign; this assumes the sign was previously zero. */
+#define decimal128SetSign(d,b) \
+ { (d)->bytes[FLOAT_WORDS_BIG_ENDIAN ? 0 : 15] |= ((unsigned) (b) << 7); }
+
+/* Clear sign. */
+#define decimal128ClearSign(d) \
+ { (d)->bytes[FLOAT_WORDS_BIG_ENDIAN ? 0 : 15] &= ~0x80; }
+
+/* Flip sign. */
+#define decimal128FlipSign(d) \
+ { (d)->bytes[FLOAT_WORDS_BIG_ENDIAN ? 0 : 15] ^= 0x80; }
+
+#endif
diff --git a/libdecnumber/dpd/decimal128Symbols.h b/libdecnumber/dpd/decimal128Symbols.h
new file mode 100644
index 0000000..da9d76b
--- /dev/null
+++ b/libdecnumber/dpd/decimal128Symbols.h
@@ -0,0 +1,16 @@
+#if !defined(DECIMAL128SYMBOLS)
+#define DECIMAL128SYMBOLS
+
+#ifdef IN_LIBGCC2
+#define decDigitsFromDPD __decDigitsFromDPD
+#define decDigitsToDPD __decDigitsToDPD
+#define decimal128Canonical __decimal128Canonical
+#define decimal128FromNumber __decimal128FromNumber
+#define decimal128FromString __decimal128FromString
+#define decimal128IsCanonical __decimal128IsCanonical
+#define decimal128ToEngString __decimal128ToEngString
+#define decimal128ToNumber __decimal128ToNumber
+#define decimal128ToString __decimal128ToString
+#endif
+
+#endif
diff --git a/libdecnumber/dpd/decimal32.c b/libdecnumber/dpd/decimal32.c
new file mode 100644
index 0000000..692c2f7
--- /dev/null
+++ b/libdecnumber/dpd/decimal32.c
@@ -0,0 +1,495 @@
+/* Decimal 32-bit format module for the decNumber C Library.
+ Copyright (C) 2005, 2007 Free Software Foundation, Inc.
+ Contributed by IBM Corporation. Author Mike Cowlishaw.
+
+ This file is part of GCC.
+
+ GCC is free software; you can redistribute it and/or modify it under
+ the terms of the GNU General Public License as published by the Free
+ Software Foundation; either version 2, or (at your option) any later
+ version.
+
+ In addition to the permissions in the GNU General Public License,
+ the Free Software Foundation gives you unlimited permission to link
+ the compiled version of this file into combinations with other
+ programs, and to distribute those combinations without any
+ restriction coming from the use of this file. (The General Public
+ License restrictions do apply in other respects; for example, they
+ cover modification of the file, and distribution when not linked
+ into a combine executable.)
+
+ GCC is distributed in the hope that it will be useful, but WITHOUT ANY
+ WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
+ for more details.
+
+ You should have received a copy of the GNU General Public License
+ along with GCC; see the file COPYING. If not, write to the Free
+ Software Foundation, 51 Franklin Street, Fifth Floor, Boston, MA
+ 02110-1301, USA. */
+
+/* ------------------------------------------------------------------ */
+/* Decimal 32-bit format module */
+/* ------------------------------------------------------------------ */
+/* This module comprises the routines for decimal32 format numbers. */
+/* Conversions are supplied to and from decNumber and String. */
+/* */
+/* This is used when decNumber provides operations, either for all */
+/* operations or as a proxy between decNumber and decSingle. */
+/* */
+/* Error handling is the same as decNumber (qv.). */
+/* ------------------------------------------------------------------ */
+#include <string.h> /* [for memset/memcpy] */
+#include <stdio.h> /* [for printf] */
+
+#include "config.h" /* GCC definitions */
+#define DECNUMDIGITS 7 /* make decNumbers with space for 7 */
+#include "decNumber.h" /* base number library */
+#include "decNumberLocal.h" /* decNumber local types, etc. */
+#include "decimal32.h" /* our primary include */
+
+/* Utility tables and routines [in decimal64.c] */
+/* DPD2BIN and the reverse are renamed to prevent link-time conflict */
+/* if decQuad is also built in the same executable */
+#define DPD2BIN DPD2BINx
+#define BIN2DPD BIN2DPDx
+extern const uInt COMBEXP[32], COMBMSD[32];
+extern const uShort DPD2BIN[1024];
+extern const uShort BIN2DPD[1000];
+extern const uByte BIN2CHAR[4001];
+
+extern void decDigitsToDPD(const decNumber *, uInt *, Int);
+extern void decDigitsFromDPD(decNumber *, const uInt *, Int);
+
+#if DECTRACE || DECCHECK
+void decimal32Show(const decimal32 *); /* for debug */
+extern void decNumberShow(const decNumber *); /* .. */
+#endif
+
+/* Useful macro */
+/* Clear a structure (e.g., a decNumber) */
+#define DEC_clear(d) memset(d, 0, sizeof(*d))
+
+/* ------------------------------------------------------------------ */
+/* decimal32FromNumber -- convert decNumber to decimal32 */
+/* */
+/* ds is the target decimal32 */
+/* dn is the source number (assumed valid) */
+/* set is the context, used only for reporting errors */
+/* */
+/* The set argument is used only for status reporting and for the */
+/* rounding mode (used if the coefficient is more than DECIMAL32_Pmax */
+/* digits or an overflow is detected). If the exponent is out of the */
+/* valid range then Overflow or Underflow will be raised. */
+/* After Underflow a subnormal result is possible. */
+/* */
+/* DEC_Clamped is set if the number has to be 'folded down' to fit, */
+/* by reducing its exponent and multiplying the coefficient by a */
+/* power of ten, or if the exponent on a zero had to be clamped. */
+/* ------------------------------------------------------------------ */
+decimal32 * decimal32FromNumber(decimal32 *d32, const decNumber *dn,
+ decContext *set) {
+ uInt status=0; /* status accumulator */
+ Int ae; /* adjusted exponent */
+ decNumber dw; /* work */
+ decContext dc; /* .. */
+ uInt *pu; /* .. */
+ uInt comb, exp; /* .. */
+ uInt targ=0; /* target 32-bit */
+
+ /* If the number has too many digits, or the exponent could be */
+ /* out of range then reduce the number under the appropriate */
+ /* constraints. This could push the number to Infinity or zero, */
+ /* so this check and rounding must be done before generating the */
+ /* decimal32] */
+ ae=dn->exponent+dn->digits-1; /* [0 if special] */
+ if (dn->digits>DECIMAL32_Pmax /* too many digits */
+ || ae>DECIMAL32_Emax /* likely overflow */
+ || ae<DECIMAL32_Emin) { /* likely underflow */
+ decContextDefault(&dc, DEC_INIT_DECIMAL32); /* [no traps] */
+ dc.round=set->round; /* use supplied rounding */
+ decNumberPlus(&dw, dn, &dc); /* (round and check) */
+ /* [this changes -0 to 0, so enforce the sign...] */
+ dw.bits|=dn->bits&DECNEG;
+ status=dc.status; /* save status */
+ dn=&dw; /* use the work number */
+ } /* maybe out of range */
+
+ if (dn->bits&DECSPECIAL) { /* a special value */
+ if (dn->bits&DECINF) targ=DECIMAL_Inf<<24;
+ else { /* sNaN or qNaN */
+ if ((*dn->lsu!=0 || dn->digits>1) /* non-zero coefficient */
+ && (dn->digits<DECIMAL32_Pmax)) { /* coefficient fits */
+ decDigitsToDPD(dn, &targ, 0);
+ }
+ if (dn->bits&DECNAN) targ|=DECIMAL_NaN<<24;
+ else targ|=DECIMAL_sNaN<<24;
+ } /* a NaN */
+ } /* special */
+
+ else { /* is finite */
+ if (decNumberIsZero(dn)) { /* is a zero */
+ /* set and clamp exponent */
+ if (dn->exponent<-DECIMAL32_Bias) {
+ exp=0; /* low clamp */
+ status|=DEC_Clamped;
+ }
+ else {
+ exp=dn->exponent+DECIMAL32_Bias; /* bias exponent */
+ if (exp>DECIMAL32_Ehigh) { /* top clamp */
+ exp=DECIMAL32_Ehigh;
+ status|=DEC_Clamped;
+ }
+ }
+ comb=(exp>>3) & 0x18; /* msd=0, exp top 2 bits .. */
+ }
+ else { /* non-zero finite number */
+ uInt msd; /* work */
+ Int pad=0; /* coefficient pad digits */
+
+ /* the dn is known to fit, but it may need to be padded */
+ exp=(uInt)(dn->exponent+DECIMAL32_Bias); /* bias exponent */
+ if (exp>DECIMAL32_Ehigh) { /* fold-down case */
+ pad=exp-DECIMAL32_Ehigh;
+ exp=DECIMAL32_Ehigh; /* [to maximum] */
+ status|=DEC_Clamped;
+ }
+
+ /* fastpath common case */
+ if (DECDPUN==3 && pad==0) {
+ targ=BIN2DPD[dn->lsu[0]];
+ if (dn->digits>3) targ|=(uInt)(BIN2DPD[dn->lsu[1]])<<10;
+ msd=(dn->digits==7 ? dn->lsu[2] : 0);
+ }
+ else { /* general case */
+ decDigitsToDPD(dn, &targ, pad);
+ /* save and clear the top digit */
+ msd=targ>>20;
+ targ&=0x000fffff;
+ }
+
+ /* create the combination field */
+ if (msd>=8) comb=0x18 | ((exp>>5) & 0x06) | (msd & 0x01);
+ else comb=((exp>>3) & 0x18) | msd;
+ }
+ targ|=comb<<26; /* add combination field .. */
+ targ|=(exp&0x3f)<<20; /* .. and exponent continuation */
+ } /* finite */
+
+ if (dn->bits&DECNEG) targ|=0x80000000; /* add sign bit */
+
+ /* now write to storage; this is endian */
+ pu=(uInt *)d32->bytes; /* overlay */
+ *pu=targ; /* directly store the int */
+
+ if (status!=0) decContextSetStatus(set, status); /* pass on status */
+ /* decimal32Show(d32); */
+ return d32;
+ } /* decimal32FromNumber */
+
+/* ------------------------------------------------------------------ */
+/* decimal32ToNumber -- convert decimal32 to decNumber */
+/* d32 is the source decimal32 */
+/* dn is the target number, with appropriate space */
+/* No error is possible. */
+/* ------------------------------------------------------------------ */
+decNumber * decimal32ToNumber(const decimal32 *d32, decNumber *dn) {
+ uInt msd; /* coefficient MSD */
+ uInt exp; /* exponent top two bits */
+ uInt comb; /* combination field */
+ uInt sour; /* source 32-bit */
+ const uInt *pu; /* work */
+
+ /* load source from storage; this is endian */
+ pu=(const uInt *)d32->bytes; /* overlay */
+ sour=*pu; /* directly load the int */
+
+ comb=(sour>>26)&0x1f; /* combination field */
+
+ decNumberZero(dn); /* clean number */
+ if (sour&0x80000000) dn->bits=DECNEG; /* set sign if negative */
+
+ msd=COMBMSD[comb]; /* decode the combination field */
+ exp=COMBEXP[comb]; /* .. */
+
+ if (exp==3) { /* is a special */
+ if (msd==0) {
+ dn->bits|=DECINF;
+ return dn; /* no coefficient needed */
+ }
+ else if (sour&0x02000000) dn->bits|=DECSNAN;
+ else dn->bits|=DECNAN;
+ msd=0; /* no top digit */
+ }
+ else { /* is a finite number */
+ dn->exponent=(exp<<6)+((sour>>20)&0x3f)-DECIMAL32_Bias; /* unbiased */
+ }
+
+ /* get the coefficient */
+ sour&=0x000fffff; /* clean coefficient continuation */
+ if (msd) { /* non-zero msd */
+ sour|=msd<<20; /* prefix to coefficient */
+ decDigitsFromDPD(dn, &sour, 3); /* process 3 declets */
+ return dn;
+ }
+ /* msd=0 */
+ if (!sour) return dn; /* easy: coefficient is 0 */
+ if (sour&0x000ffc00) /* need 2 declets? */
+ decDigitsFromDPD(dn, &sour, 2); /* process 2 declets */
+ else
+ decDigitsFromDPD(dn, &sour, 1); /* process 1 declet */
+ return dn;
+ } /* decimal32ToNumber */
+
+/* ------------------------------------------------------------------ */
+/* to-scientific-string -- conversion to numeric string */
+/* to-engineering-string -- conversion to numeric string */
+/* */
+/* decimal32ToString(d32, string); */
+/* decimal32ToEngString(d32, string); */
+/* */
+/* d32 is the decimal32 format number to convert */
+/* string is the string where the result will be laid out */
+/* */
+/* string must be at least 24 characters */
+/* */
+/* No error is possible, and no status can be set. */
+/* ------------------------------------------------------------------ */
+char * decimal32ToEngString(const decimal32 *d32, char *string){
+ decNumber dn; /* work */
+ decimal32ToNumber(d32, &dn);
+ decNumberToEngString(&dn, string);
+ return string;
+ } /* decimal32ToEngString */
+
+char * decimal32ToString(const decimal32 *d32, char *string){
+ uInt msd; /* coefficient MSD */
+ Int exp; /* exponent top two bits or full */
+ uInt comb; /* combination field */
+ char *cstart; /* coefficient start */
+ char *c; /* output pointer in string */
+ const uInt *pu; /* work */
+ const uByte *u; /* .. */
+ char *s, *t; /* .. (source, target) */
+ Int dpd; /* .. */
+ Int pre, e; /* .. */
+ uInt sour; /* source 32-bit */
+
+ /* load source from storage; this is endian */
+ pu=(const uInt *)d32->bytes; /* overlay */
+ sour=*pu; /* directly load the int */
+
+ c=string; /* where result will go */
+ if (((Int)sour)<0) *c++='-'; /* handle sign */
+
+ comb=(sour>>26)&0x1f; /* combination field */
+ msd=COMBMSD[comb]; /* decode the combination field */
+ exp=COMBEXP[comb]; /* .. */
+
+ if (exp==3) {
+ if (msd==0) { /* infinity */
+ strcpy(c, "Inf");
+ strcpy(c+3, "inity");
+ return string; /* easy */
+ }
+ if (sour&0x02000000) *c++='s'; /* sNaN */
+ strcpy(c, "NaN"); /* complete word */
+ c+=3; /* step past */
+ if ((sour&0x000fffff)==0) return string; /* zero payload */
+ /* otherwise drop through to add integer; set correct exp */
+ exp=0; msd=0; /* setup for following code */
+ }
+ else exp=(exp<<6)+((sour>>20)&0x3f)-DECIMAL32_Bias; /* unbiased */
+
+ /* convert 7 digits of significand to characters */
+ cstart=c; /* save start of coefficient */
+ if (msd) *c++='0'+(char)msd; /* non-zero most significant digit */
+
+ /* Now decode the declets. After extracting each one, it is */
+ /* decoded to binary and then to a 4-char sequence by table lookup; */
+ /* the 4-chars are a 1-char length (significant digits, except 000 */
+ /* has length 0). This allows us to left-align the first declet */
+ /* with non-zero content, then remaining ones are full 3-char */
+ /* length. We use fixed-length memcpys because variable-length */
+ /* causes a subroutine call in GCC. (These are length 4 for speed */
+ /* and are safe because the array has an extra terminator byte.) */
+ #define dpd2char u=&BIN2CHAR[DPD2BIN[dpd]*4]; \
+ if (c!=cstart) {memcpy(c, u+1, 4); c+=3;} \
+ else if (*u) {memcpy(c, u+4-*u, 4); c+=*u;}
+
+ dpd=(sour>>10)&0x3ff; /* declet 1 */
+ dpd2char;
+ dpd=(sour)&0x3ff; /* declet 2 */
+ dpd2char;
+
+ if (c==cstart) *c++='0'; /* all zeros -- make 0 */
+
+ if (exp==0) { /* integer or NaN case -- easy */
+ *c='\0'; /* terminate */
+ return string;
+ }
+
+ /* non-0 exponent */
+ e=0; /* assume no E */
+ pre=c-cstart+exp;
+ /* [here, pre-exp is the digits count (==1 for zero)] */
+ if (exp>0 || pre<-5) { /* need exponential form */
+ e=pre-1; /* calculate E value */
+ pre=1; /* assume one digit before '.' */
+ } /* exponential form */
+
+ /* modify the coefficient, adding 0s, '.', and E+nn as needed */
+ s=c-1; /* source (LSD) */
+ if (pre>0) { /* ddd.ddd (plain), perhaps with E */
+ char *dotat=cstart+pre;
+ if (dotat<c) { /* if embedded dot needed... */
+ t=c; /* target */
+ for (; s>=dotat; s--, t--) *t=*s; /* open the gap; leave t at gap */
+ *t='.'; /* insert the dot */
+ c++; /* length increased by one */
+ }
+
+ /* finally add the E-part, if needed; it will never be 0, and has */
+ /* a maximum length of 3 digits (E-101 case) */
+ if (e!=0) {
+ *c++='E'; /* starts with E */
+ *c++='+'; /* assume positive */
+ if (e<0) {
+ *(c-1)='-'; /* oops, need '-' */
+ e=-e; /* uInt, please */
+ }
+ u=&BIN2CHAR[e*4]; /* -> length byte */
+ memcpy(c, u+4-*u, 4); /* copy fixed 4 characters [is safe] */
+ c+=*u; /* bump pointer appropriately */
+ }
+ *c='\0'; /* add terminator */
+ /*printf("res %s\n", string); */
+ return string;
+ } /* pre>0 */
+
+ /* -5<=pre<=0: here for plain 0.ddd or 0.000ddd forms (can never have E) */
+ t=c+1-pre;
+ *(t+1)='\0'; /* can add terminator now */
+ for (; s>=cstart; s--, t--) *t=*s; /* shift whole coefficient right */
+ c=cstart;
+ *c++='0'; /* always starts with 0. */
+ *c++='.';
+ for (; pre<0; pre++) *c++='0'; /* add any 0's after '.' */
+ /*printf("res %s\n", string); */
+ return string;
+ } /* decimal32ToString */
+
+/* ------------------------------------------------------------------ */
+/* to-number -- conversion from numeric string */
+/* */
+/* decimal32FromString(result, string, set); */
+/* */
+/* result is the decimal32 format number which gets the result of */
+/* the conversion */
+/* *string is the character string which should contain a valid */
+/* number (which may be a special value) */
+/* set is the context */
+/* */
+/* The context is supplied to this routine is used for error handling */
+/* (setting of status and traps) and for the rounding mode, only. */
+/* If an error occurs, the result will be a valid decimal32 NaN. */
+/* ------------------------------------------------------------------ */
+decimal32 * decimal32FromString(decimal32 *result, const char *string,
+ decContext *set) {
+ decContext dc; /* work */
+ decNumber dn; /* .. */
+
+ decContextDefault(&dc, DEC_INIT_DECIMAL32); /* no traps, please */
+ dc.round=set->round; /* use supplied rounding */
+
+ decNumberFromString(&dn, string, &dc); /* will round if needed */
+ decimal32FromNumber(result, &dn, &dc);
+ if (dc.status!=0) { /* something happened */
+ decContextSetStatus(set, dc.status); /* .. pass it on */
+ }
+ return result;
+ } /* decimal32FromString */
+
+/* ------------------------------------------------------------------ */
+/* decimal32IsCanonical -- test whether encoding is canonical */
+/* d32 is the source decimal32 */
+/* returns 1 if the encoding of d32 is canonical, 0 otherwise */
+/* No error is possible. */
+/* ------------------------------------------------------------------ */
+uint32_t decimal32IsCanonical(const decimal32 *d32) {
+ decNumber dn; /* work */
+ decimal32 canon; /* .. */
+ decContext dc; /* .. */
+ decContextDefault(&dc, DEC_INIT_DECIMAL32);
+ decimal32ToNumber(d32, &dn);
+ decimal32FromNumber(&canon, &dn, &dc);/* canon will now be canonical */
+ return memcmp(d32, &canon, DECIMAL32_Bytes)==0;
+ } /* decimal32IsCanonical */
+
+/* ------------------------------------------------------------------ */
+/* decimal32Canonical -- copy an encoding, ensuring it is canonical */
+/* d32 is the source decimal32 */
+/* result is the target (may be the same decimal32) */
+/* returns result */
+/* No error is possible. */
+/* ------------------------------------------------------------------ */
+decimal32 * decimal32Canonical(decimal32 *result, const decimal32 *d32) {
+ decNumber dn; /* work */
+ decContext dc; /* .. */
+ decContextDefault(&dc, DEC_INIT_DECIMAL32);
+ decimal32ToNumber(d32, &dn);
+ decimal32FromNumber(result, &dn, &dc);/* result will now be canonical */
+ return result;
+ } /* decimal32Canonical */
+
+#if DECTRACE || DECCHECK
+/* Macros for accessing decimal32 fields. These assume the argument
+ is a reference (pointer) to the decimal32 structure, and the
+ decimal32 is in network byte order (big-endian) */
+/* Get sign */
+#define decimal32Sign(d) ((unsigned)(d)->bytes[0]>>7)
+
+/* Get combination field */
+#define decimal32Comb(d) (((d)->bytes[0] & 0x7c)>>2)
+
+/* Get exponent continuation [does not remove bias] */
+#define decimal32ExpCon(d) ((((d)->bytes[0] & 0x03)<<4) \
+ | ((unsigned)(d)->bytes[1]>>4))
+
+/* Set sign [this assumes sign previously 0] */
+#define decimal32SetSign(d, b) { \
+ (d)->bytes[0]|=((unsigned)(b)<<7);}
+
+/* Set exponent continuation [does not apply bias] */
+/* This assumes range has been checked and exponent previously 0; */
+/* type of exponent must be unsigned */
+#define decimal32SetExpCon(d, e) { \
+ (d)->bytes[0]|=(uint8_t)((e)>>4); \
+ (d)->bytes[1]|=(uint8_t)(((e)&0x0F)<<4);}
+
+/* ------------------------------------------------------------------ */
+/* decimal32Show -- display a decimal32 in hexadecimal [debug aid] */
+/* d32 -- the number to show */
+/* ------------------------------------------------------------------ */
+/* Also shows sign/cob/expconfields extracted - valid bigendian only */
+void decimal32Show(const decimal32 *d32) {
+ char buf[DECIMAL32_Bytes*2+1];
+ Int i, j=0;
+
+ if (DECLITEND) {
+ for (i=0; i<DECIMAL32_Bytes; i++, j+=2) {
+ sprintf(&buf[j], "%02x", d32->bytes[3-i]);
+ }
+ printf(" D32> %s [S:%d Cb:%02x Ec:%02x] LittleEndian\n", buf,
+ d32->bytes[3]>>7, (d32->bytes[3]>>2)&0x1f,
+ ((d32->bytes[3]&0x3)<<4)| (d32->bytes[2]>>4));
+ }
+ else {
+ for (i=0; i<DECIMAL32_Bytes; i++, j+=2) {
+ sprintf(&buf[j], "%02x", d32->bytes[i]);
+ }
+ printf(" D32> %s [S:%d Cb:%02x Ec:%02x] BigEndian\n", buf,
+ decimal32Sign(d32), decimal32Comb(d32), decimal32ExpCon(d32));
+ }
+ } /* decimal32Show */
+#endif
diff --git a/libdecnumber/dpd/decimal32.h b/libdecnumber/dpd/decimal32.h
new file mode 100644
index 0000000..0d53046
--- /dev/null
+++ b/libdecnumber/dpd/decimal32.h
@@ -0,0 +1,99 @@
+/* Decimal 32-bit format module header for the decNumber C Library.
+ Copyright (C) 2005, 2007 Free Software Foundation, Inc.
+ Contributed by IBM Corporation. Author Mike Cowlishaw.
+
+ This file is part of GCC.
+
+ GCC is free software; you can redistribute it and/or modify it under
+ the terms of the GNU General Public License as published by the Free
+ Software Foundation; either version 2, or (at your option) any later
+ version.
+
+ In addition to the permissions in the GNU General Public License,
+ the Free Software Foundation gives you unlimited permission to link
+ the compiled version of this file into combinations with other
+ programs, and to distribute those combinations without any
+ restriction coming from the use of this file. (The General Public
+ License restrictions do apply in other respects; for example, they
+ cover modification of the file, and distribution when not linked
+ into a combine executable.)
+
+ GCC is distributed in the hope that it will be useful, but WITHOUT ANY
+ WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
+ for more details.
+
+ You should have received a copy of the GNU General Public License
+ along with GCC; see the file COPYING. If not, write to the Free
+ Software Foundation, 51 Franklin Street, Fifth Floor, Boston, MA
+ 02110-1301, USA. */
+
+/* ------------------------------------------------------------------ */
+/* Decimal 32-bit format module header */
+/* ------------------------------------------------------------------ */
+
+#if !defined(DECIMAL32)
+ #define DECIMAL32
+ #define DEC32NAME "decimal32" /* Short name */
+ #define DEC32FULLNAME "Decimal 32-bit Number" /* Verbose name */
+ #define DEC32AUTHOR "Mike Cowlishaw" /* Who to blame */
+
+ /* parameters for decimal32s */
+ #define DECIMAL32_Bytes 4 /* length */
+ #define DECIMAL32_Pmax 7 /* maximum precision (digits) */
+ #define DECIMAL32_Emax 96 /* maximum adjusted exponent */
+ #define DECIMAL32_Emin -95 /* minimum adjusted exponent */
+ #define DECIMAL32_Bias 101 /* bias for the exponent */
+ #define DECIMAL32_String 15 /* maximum string length, +1 */
+ #define DECIMAL32_EconL 6 /* exp. continuation length */
+ /* highest biased exponent (Elimit-1) */
+ #define DECIMAL32_Ehigh (DECIMAL32_Emax+DECIMAL32_Bias-DECIMAL32_Pmax+1)
+
+ /* check enough digits, if pre-defined */
+ #if defined(DECNUMDIGITS)
+ #if (DECNUMDIGITS<DECIMAL32_Pmax)
+ #error decimal32.h needs pre-defined DECNUMDIGITS>=7 for safe use
+ #endif
+ #endif
+
+ #ifndef DECNUMDIGITS
+ #define DECNUMDIGITS DECIMAL32_Pmax /* size if not already defined*/
+ #endif
+ #ifndef DECNUMBER
+ #include "decNumber.h" /* context and number library */
+ #endif
+
+ /* Decimal 32-bit type, accessible by bytes */
+ typedef struct {
+ uint8_t bytes[DECIMAL32_Bytes]; /* decimal32: 1, 5, 6, 20 bits*/
+ } decimal32;
+
+ /* special values [top byte excluding sign bit; last two bits are */
+ /* don't-care for Infinity on input, last bit don't-care for NaN] */
+ #if !defined(DECIMAL_NaN)
+ #define DECIMAL_NaN 0x7c /* 0 11111 00 NaN */
+ #define DECIMAL_sNaN 0x7e /* 0 11111 10 sNaN */
+ #define DECIMAL_Inf 0x78 /* 0 11110 00 Infinity */
+ #endif
+
+ /* ---------------------------------------------------------------- */
+ /* Routines */
+ /* ---------------------------------------------------------------- */
+
+ #include "decimal32Symbols.h"
+
+ /* String conversions */
+ decimal32 * decimal32FromString(decimal32 *, const char *, decContext *);
+ char * decimal32ToString(const decimal32 *, char *);
+ char * decimal32ToEngString(const decimal32 *, char *);
+
+ /* decNumber conversions */
+ decimal32 * decimal32FromNumber(decimal32 *, const decNumber *,
+ decContext *);
+ decNumber * decimal32ToNumber(const decimal32 *, decNumber *);
+
+ /* Format-dependent utilities */
+ uint32_t decimal32IsCanonical(const decimal32 *);
+ decimal32 * decimal32Canonical(decimal32 *, const decimal32 *);
+
+#endif
diff --git a/libdecnumber/dpd/decimal32Symbols.h b/libdecnumber/dpd/decimal32Symbols.h
new file mode 100644
index 0000000..de11934
--- /dev/null
+++ b/libdecnumber/dpd/decimal32Symbols.h
@@ -0,0 +1,16 @@
+#if !defined(DECIMAL32SYMBOLS)
+#define DECIMAL32SYMBOLS
+
+#ifdef IN_LIBGCC2
+#define decDigitsFromDPD __decDigitsFromDPD
+#define decDigitsToDPD __decDigitsToDPD
+#define decimal32Canonical __decimal32Canonical
+#define decimal32FromNumber __decimal32FromNumber
+#define decimal32FromString __decimal32FromString
+#define decimal32IsCanonical __decimal32IsCanonical
+#define decimal32ToEngString __decimal32ToEngString
+#define decimal32ToNumber __decimal32ToNumber
+#define decimal32ToString __decimal32ToString
+#endif
+
+#endif
diff --git a/libdecnumber/dpd/decimal64.c b/libdecnumber/dpd/decimal64.c
new file mode 100644
index 0000000..359214e
--- /dev/null
+++ b/libdecnumber/dpd/decimal64.c
@@ -0,0 +1,856 @@
+/* Decimal 64-bit format module for the decNumber C Library.
+ Copyright (C) 2005, 2007 Free Software Foundation, Inc.
+ Contributed by IBM Corporation. Author Mike Cowlishaw.
+
+ This file is part of GCC.
+
+ GCC is free software; you can redistribute it and/or modify it under
+ the terms of the GNU General Public License as published by the Free
+ Software Foundation; either version 2, or (at your option) any later
+ version.
+
+ In addition to the permissions in the GNU General Public License,
+ the Free Software Foundation gives you unlimited permission to link
+ the compiled version of this file into combinations with other
+ programs, and to distribute those combinations without any
+ restriction coming from the use of this file. (The General Public
+ License restrictions do apply in other respects; for example, they
+ cover modification of the file, and distribution when not linked
+ into a combine executable.)
+
+ GCC is distributed in the hope that it will be useful, but WITHOUT ANY
+ WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
+ for more details.
+
+ You should have received a copy of the GNU General Public License
+ along with GCC; see the file COPYING. If not, write to the Free
+ Software Foundation, 51 Franklin Street, Fifth Floor, Boston, MA
+ 02110-1301, USA. */
+
+/* ------------------------------------------------------------------ */
+/* Decimal 64-bit format module */
+/* ------------------------------------------------------------------ */
+/* This module comprises the routines for decimal64 format numbers. */
+/* Conversions are supplied to and from decNumber and String. */
+/* */
+/* This is used when decNumber provides operations, either for all */
+/* operations or as a proxy between decNumber and decSingle. */
+/* */
+/* Error handling is the same as decNumber (qv.). */
+/* ------------------------------------------------------------------ */
+#include <string.h> /* [for memset/memcpy] */
+#include <stdio.h> /* [for printf] */
+
+#include "config.h" /* GCC definitions */
+#define DECNUMDIGITS 16 /* make decNumbers with space for 16 */
+#include "decNumber.h" /* base number library */
+#include "decNumberLocal.h" /* decNumber local types, etc. */
+#include "decimal64.h" /* our primary include */
+
+/* Utility routines and tables [in decimal64.c]; externs for C++ */
+/* DPD2BIN and the reverse are renamed to prevent link-time conflict */
+/* if decQuad is also built in the same executable */
+#define DPD2BIN DPD2BINx
+#define BIN2DPD BIN2DPDx
+extern const uInt COMBEXP[32], COMBMSD[32];
+extern const uShort DPD2BIN[1024];
+extern const uShort BIN2DPD[1000];
+extern const uByte BIN2CHAR[4001];
+
+extern void decDigitsFromDPD(decNumber *, const uInt *, Int);
+extern void decDigitsToDPD(const decNumber *, uInt *, Int);
+
+#if DECTRACE || DECCHECK
+void decimal64Show(const decimal64 *); /* for debug */
+extern void decNumberShow(const decNumber *); /* .. */
+#endif
+
+/* Useful macro */
+/* Clear a structure (e.g., a decNumber) */
+#define DEC_clear(d) memset(d, 0, sizeof(*d))
+
+/* define and include the tables to use for conversions */
+#define DEC_BIN2CHAR 1
+#define DEC_DPD2BIN 1
+#define DEC_BIN2DPD 1 /* used for all sizes */
+#include "decDPD.h" /* lookup tables */
+
+/* ------------------------------------------------------------------ */
+/* decimal64FromNumber -- convert decNumber to decimal64 */
+/* */
+/* ds is the target decimal64 */
+/* dn is the source number (assumed valid) */
+/* set is the context, used only for reporting errors */
+/* */
+/* The set argument is used only for status reporting and for the */
+/* rounding mode (used if the coefficient is more than DECIMAL64_Pmax */
+/* digits or an overflow is detected). If the exponent is out of the */
+/* valid range then Overflow or Underflow will be raised. */
+/* After Underflow a subnormal result is possible. */
+/* */
+/* DEC_Clamped is set if the number has to be 'folded down' to fit, */
+/* by reducing its exponent and multiplying the coefficient by a */
+/* power of ten, or if the exponent on a zero had to be clamped. */
+/* ------------------------------------------------------------------ */
+decimal64 * decimal64FromNumber(decimal64 *d64, const decNumber *dn,
+ decContext *set) {
+ uInt status=0; /* status accumulator */
+ Int ae; /* adjusted exponent */
+ decNumber dw; /* work */
+ decContext dc; /* .. */
+ uInt *pu; /* .. */
+ uInt comb, exp; /* .. */
+ uInt targar[2]={0, 0}; /* target 64-bit */
+ #define targhi targar[1] /* name the word with the sign */
+ #define targlo targar[0] /* and the other */
+
+ /* If the number has too many digits, or the exponent could be */
+ /* out of range then reduce the number under the appropriate */
+ /* constraints. This could push the number to Infinity or zero, */
+ /* so this check and rounding must be done before generating the */
+ /* decimal64] */
+ ae=dn->exponent+dn->digits-1; /* [0 if special] */
+ if (dn->digits>DECIMAL64_Pmax /* too many digits */
+ || ae>DECIMAL64_Emax /* likely overflow */
+ || ae<DECIMAL64_Emin) { /* likely underflow */
+ decContextDefault(&dc, DEC_INIT_DECIMAL64); /* [no traps] */
+ dc.round=set->round; /* use supplied rounding */
+ decNumberPlus(&dw, dn, &dc); /* (round and check) */
+ /* [this changes -0 to 0, so enforce the sign...] */
+ dw.bits|=dn->bits&DECNEG;
+ status=dc.status; /* save status */
+ dn=&dw; /* use the work number */
+ } /* maybe out of range */
+
+ if (dn->bits&DECSPECIAL) { /* a special value */
+ if (dn->bits&DECINF) targhi=DECIMAL_Inf<<24;
+ else { /* sNaN or qNaN */
+ if ((*dn->lsu!=0 || dn->digits>1) /* non-zero coefficient */
+ && (dn->digits<DECIMAL64_Pmax)) { /* coefficient fits */
+ decDigitsToDPD(dn, targar, 0);
+ }
+ if (dn->bits&DECNAN) targhi|=DECIMAL_NaN<<24;
+ else targhi|=DECIMAL_sNaN<<24;
+ } /* a NaN */
+ } /* special */
+
+ else { /* is finite */
+ if (decNumberIsZero(dn)) { /* is a zero */
+ /* set and clamp exponent */
+ if (dn->exponent<-DECIMAL64_Bias) {
+ exp=0; /* low clamp */
+ status|=DEC_Clamped;
+ }
+ else {
+ exp=dn->exponent+DECIMAL64_Bias; /* bias exponent */
+ if (exp>DECIMAL64_Ehigh) { /* top clamp */
+ exp=DECIMAL64_Ehigh;
+ status|=DEC_Clamped;
+ }
+ }
+ comb=(exp>>5) & 0x18; /* msd=0, exp top 2 bits .. */
+ }
+ else { /* non-zero finite number */
+ uInt msd; /* work */
+ Int pad=0; /* coefficient pad digits */
+
+ /* the dn is known to fit, but it may need to be padded */
+ exp=(uInt)(dn->exponent+DECIMAL64_Bias); /* bias exponent */
+ if (exp>DECIMAL64_Ehigh) { /* fold-down case */
+ pad=exp-DECIMAL64_Ehigh;
+ exp=DECIMAL64_Ehigh; /* [to maximum] */
+ status|=DEC_Clamped;
+ }
+
+ /* fastpath common case */
+ if (DECDPUN==3 && pad==0) {
+ uInt dpd[6]={0,0,0,0,0,0};
+ uInt i;
+ Int d=dn->digits;
+ for (i=0; d>0; i++, d-=3) dpd[i]=BIN2DPD[dn->lsu[i]];
+ targlo =dpd[0];
+ targlo|=dpd[1]<<10;
+ targlo|=dpd[2]<<20;
+ if (dn->digits>6) {
+ targlo|=dpd[3]<<30;
+ targhi =dpd[3]>>2;
+ targhi|=dpd[4]<<8;
+ }
+ msd=dpd[5]; /* [did not really need conversion] */
+ }
+ else { /* general case */
+ decDigitsToDPD(dn, targar, pad);
+ /* save and clear the top digit */
+ msd=targhi>>18;
+ targhi&=0x0003ffff;
+ }
+
+ /* create the combination field */
+ if (msd>=8) comb=0x18 | ((exp>>7) & 0x06) | (msd & 0x01);
+ else comb=((exp>>5) & 0x18) | msd;
+ }
+ targhi|=comb<<26; /* add combination field .. */
+ targhi|=(exp&0xff)<<18; /* .. and exponent continuation */
+ } /* finite */
+
+ if (dn->bits&DECNEG) targhi|=0x80000000; /* add sign bit */
+
+ /* now write to storage; this is now always endian */
+ pu=(uInt *)d64->bytes; /* overlay */
+ if (DECLITEND) {
+ pu[0]=targar[0]; /* directly store the low int */
+ pu[1]=targar[1]; /* then the high int */
+ }
+ else {
+ pu[0]=targar[1]; /* directly store the high int */
+ pu[1]=targar[0]; /* then the low int */
+ }
+
+ if (status!=0) decContextSetStatus(set, status); /* pass on status */
+ /* decimal64Show(d64); */
+ return d64;
+ } /* decimal64FromNumber */
+
+/* ------------------------------------------------------------------ */
+/* decimal64ToNumber -- convert decimal64 to decNumber */
+/* d64 is the source decimal64 */
+/* dn is the target number, with appropriate space */
+/* No error is possible. */
+/* ------------------------------------------------------------------ */
+decNumber * decimal64ToNumber(const decimal64 *d64, decNumber *dn) {
+ uInt msd; /* coefficient MSD */
+ uInt exp; /* exponent top two bits */
+ uInt comb; /* combination field */
+ const uInt *pu; /* work */
+ Int need; /* .. */
+ uInt sourar[2]; /* source 64-bit */
+ #define sourhi sourar[1] /* name the word with the sign */
+ #define sourlo sourar[0] /* and the lower word */
+
+ /* load source from storage; this is endian */
+ pu=(const uInt *)d64->bytes; /* overlay */
+ if (DECLITEND) {
+ sourlo=pu[0]; /* directly load the low int */
+ sourhi=pu[1]; /* then the high int */
+ }
+ else {
+ sourhi=pu[0]; /* directly load the high int */
+ sourlo=pu[1]; /* then the low int */
+ }
+
+ comb=(sourhi>>26)&0x1f; /* combination field */
+
+ decNumberZero(dn); /* clean number */
+ if (sourhi&0x80000000) dn->bits=DECNEG; /* set sign if negative */
+
+ msd=COMBMSD[comb]; /* decode the combination field */
+ exp=COMBEXP[comb]; /* .. */
+
+ if (exp==3) { /* is a special */
+ if (msd==0) {
+ dn->bits|=DECINF;
+ return dn; /* no coefficient needed */
+ }
+ else if (sourhi&0x02000000) dn->bits|=DECSNAN;
+ else dn->bits|=DECNAN;
+ msd=0; /* no top digit */
+ }
+ else { /* is a finite number */
+ dn->exponent=(exp<<8)+((sourhi>>18)&0xff)-DECIMAL64_Bias; /* unbiased */
+ }
+
+ /* get the coefficient */
+ sourhi&=0x0003ffff; /* clean coefficient continuation */
+ if (msd) { /* non-zero msd */
+ sourhi|=msd<<18; /* prefix to coefficient */
+ need=6; /* process 6 declets */
+ }
+ else { /* msd=0 */
+ if (!sourhi) { /* top word 0 */
+ if (!sourlo) return dn; /* easy: coefficient is 0 */
+ need=3; /* process at least 3 declets */
+ if (sourlo&0xc0000000) need++; /* process 4 declets */
+ /* [could reduce some more, here] */
+ }
+ else { /* some bits in top word, msd=0 */
+ need=4; /* process at least 4 declets */
+ if (sourhi&0x0003ff00) need++; /* top declet!=0, process 5 */
+ }
+ } /*msd=0 */
+
+ decDigitsFromDPD(dn, sourar, need); /* process declets */
+ return dn;
+ } /* decimal64ToNumber */
+
+
+/* ------------------------------------------------------------------ */
+/* to-scientific-string -- conversion to numeric string */
+/* to-engineering-string -- conversion to numeric string */
+/* */
+/* decimal64ToString(d64, string); */
+/* decimal64ToEngString(d64, string); */
+/* */
+/* d64 is the decimal64 format number to convert */
+/* string is the string where the result will be laid out */
+/* */
+/* string must be at least 24 characters */
+/* */
+/* No error is possible, and no status can be set. */
+/* ------------------------------------------------------------------ */
+char * decimal64ToEngString(const decimal64 *d64, char *string){
+ decNumber dn; /* work */
+ decimal64ToNumber(d64, &dn);
+ decNumberToEngString(&dn, string);
+ return string;
+ } /* decimal64ToEngString */
+
+char * decimal64ToString(const decimal64 *d64, char *string){
+ uInt msd; /* coefficient MSD */
+ Int exp; /* exponent top two bits or full */
+ uInt comb; /* combination field */
+ char *cstart; /* coefficient start */
+ char *c; /* output pointer in string */
+ const uInt *pu; /* work */
+ char *s, *t; /* .. (source, target) */
+ Int dpd; /* .. */
+ Int pre, e; /* .. */
+ const uByte *u; /* .. */
+
+ uInt sourar[2]; /* source 64-bit */
+ #define sourhi sourar[1] /* name the word with the sign */
+ #define sourlo sourar[0] /* and the lower word */
+
+ /* load source from storage; this is endian */
+ pu=(const uInt *)d64->bytes; /* overlay */
+ if (DECLITEND) {
+ sourlo=pu[0]; /* directly load the low int */
+ sourhi=pu[1]; /* then the high int */
+ }
+ else {
+ sourhi=pu[0]; /* directly load the high int */
+ sourlo=pu[1]; /* then the low int */
+ }
+
+ c=string; /* where result will go */
+ if (((Int)sourhi)<0) *c++='-'; /* handle sign */
+
+ comb=(sourhi>>26)&0x1f; /* combination field */
+ msd=COMBMSD[comb]; /* decode the combination field */
+ exp=COMBEXP[comb]; /* .. */
+
+ if (exp==3) {
+ if (msd==0) { /* infinity */
+ strcpy(c, "Inf");
+ strcpy(c+3, "inity");
+ return string; /* easy */
+ }
+ if (sourhi&0x02000000) *c++='s'; /* sNaN */
+ strcpy(c, "NaN"); /* complete word */
+ c+=3; /* step past */
+ if (sourlo==0 && (sourhi&0x0003ffff)==0) return string; /* zero payload */
+ /* otherwise drop through to add integer; set correct exp */
+ exp=0; msd=0; /* setup for following code */
+ }
+ else exp=(exp<<8)+((sourhi>>18)&0xff)-DECIMAL64_Bias;
+
+ /* convert 16 digits of significand to characters */
+ cstart=c; /* save start of coefficient */
+ if (msd) *c++='0'+(char)msd; /* non-zero most significant digit */
+
+ /* Now decode the declets. After extracting each one, it is */
+ /* decoded to binary and then to a 4-char sequence by table lookup; */
+ /* the 4-chars are a 1-char length (significant digits, except 000 */
+ /* has length 0). This allows us to left-align the first declet */
+ /* with non-zero content, then remaining ones are full 3-char */
+ /* length. We use fixed-length memcpys because variable-length */
+ /* causes a subroutine call in GCC. (These are length 4 for speed */
+ /* and are safe because the array has an extra terminator byte.) */
+ #define dpd2char u=&BIN2CHAR[DPD2BIN[dpd]*4]; \
+ if (c!=cstart) {memcpy(c, u+1, 4); c+=3;} \
+ else if (*u) {memcpy(c, u+4-*u, 4); c+=*u;}
+
+ dpd=(sourhi>>8)&0x3ff; /* declet 1 */
+ dpd2char;
+ dpd=((sourhi&0xff)<<2) | (sourlo>>30); /* declet 2 */
+ dpd2char;
+ dpd=(sourlo>>20)&0x3ff; /* declet 3 */
+ dpd2char;
+ dpd=(sourlo>>10)&0x3ff; /* declet 4 */
+ dpd2char;
+ dpd=(sourlo)&0x3ff; /* declet 5 */
+ dpd2char;
+
+ if (c==cstart) *c++='0'; /* all zeros -- make 0 */
+
+ if (exp==0) { /* integer or NaN case -- easy */
+ *c='\0'; /* terminate */
+ return string;
+ }
+
+ /* non-0 exponent */
+ e=0; /* assume no E */
+ pre=c-cstart+exp;
+ /* [here, pre-exp is the digits count (==1 for zero)] */
+ if (exp>0 || pre<-5) { /* need exponential form */
+ e=pre-1; /* calculate E value */
+ pre=1; /* assume one digit before '.' */
+ } /* exponential form */
+
+ /* modify the coefficient, adding 0s, '.', and E+nn as needed */
+ s=c-1; /* source (LSD) */
+ if (pre>0) { /* ddd.ddd (plain), perhaps with E */
+ char *dotat=cstart+pre;
+ if (dotat<c) { /* if embedded dot needed... */
+ t=c; /* target */
+ for (; s>=dotat; s--, t--) *t=*s; /* open the gap; leave t at gap */
+ *t='.'; /* insert the dot */
+ c++; /* length increased by one */
+ }
+
+ /* finally add the E-part, if needed; it will never be 0, and has */
+ /* a maximum length of 3 digits */
+ if (e!=0) {
+ *c++='E'; /* starts with E */
+ *c++='+'; /* assume positive */
+ if (e<0) {
+ *(c-1)='-'; /* oops, need '-' */
+ e=-e; /* uInt, please */
+ }
+ u=&BIN2CHAR[e*4]; /* -> length byte */
+ memcpy(c, u+4-*u, 4); /* copy fixed 4 characters [is safe] */
+ c+=*u; /* bump pointer appropriately */
+ }
+ *c='\0'; /* add terminator */
+ /*printf("res %s\n", string); */
+ return string;
+ } /* pre>0 */
+
+ /* -5<=pre<=0: here for plain 0.ddd or 0.000ddd forms (can never have E) */
+ t=c+1-pre;
+ *(t+1)='\0'; /* can add terminator now */
+ for (; s>=cstart; s--, t--) *t=*s; /* shift whole coefficient right */
+ c=cstart;
+ *c++='0'; /* always starts with 0. */
+ *c++='.';
+ for (; pre<0; pre++) *c++='0'; /* add any 0's after '.' */
+ /*printf("res %s\n", string); */
+ return string;
+ } /* decimal64ToString */
+
+/* ------------------------------------------------------------------ */
+/* to-number -- conversion from numeric string */
+/* */
+/* decimal64FromString(result, string, set); */
+/* */
+/* result is the decimal64 format number which gets the result of */
+/* the conversion */
+/* *string is the character string which should contain a valid */
+/* number (which may be a special value) */
+/* set is the context */
+/* */
+/* The context is supplied to this routine is used for error handling */
+/* (setting of status and traps) and for the rounding mode, only. */
+/* If an error occurs, the result will be a valid decimal64 NaN. */
+/* ------------------------------------------------------------------ */
+decimal64 * decimal64FromString(decimal64 *result, const char *string,
+ decContext *set) {
+ decContext dc; /* work */
+ decNumber dn; /* .. */
+
+ decContextDefault(&dc, DEC_INIT_DECIMAL64); /* no traps, please */
+ dc.round=set->round; /* use supplied rounding */
+
+ decNumberFromString(&dn, string, &dc); /* will round if needed */
+
+ decimal64FromNumber(result, &dn, &dc);
+ if (dc.status!=0) { /* something happened */
+ decContextSetStatus(set, dc.status); /* .. pass it on */
+ }
+ return result;
+ } /* decimal64FromString */
+
+/* ------------------------------------------------------------------ */
+/* decimal64IsCanonical -- test whether encoding is canonical */
+/* d64 is the source decimal64 */
+/* returns 1 if the encoding of d64 is canonical, 0 otherwise */
+/* No error is possible. */
+/* ------------------------------------------------------------------ */
+uint32_t decimal64IsCanonical(const decimal64 *d64) {
+ decNumber dn; /* work */
+ decimal64 canon; /* .. */
+ decContext dc; /* .. */
+ decContextDefault(&dc, DEC_INIT_DECIMAL64);
+ decimal64ToNumber(d64, &dn);
+ decimal64FromNumber(&canon, &dn, &dc);/* canon will now be canonical */
+ return memcmp(d64, &canon, DECIMAL64_Bytes)==0;
+ } /* decimal64IsCanonical */
+
+/* ------------------------------------------------------------------ */
+/* decimal64Canonical -- copy an encoding, ensuring it is canonical */
+/* d64 is the source decimal64 */
+/* result is the target (may be the same decimal64) */
+/* returns result */
+/* No error is possible. */
+/* ------------------------------------------------------------------ */
+decimal64 * decimal64Canonical(decimal64 *result, const decimal64 *d64) {
+ decNumber dn; /* work */
+ decContext dc; /* .. */
+ decContextDefault(&dc, DEC_INIT_DECIMAL64);
+ decimal64ToNumber(d64, &dn);
+ decimal64FromNumber(result, &dn, &dc);/* result will now be canonical */
+ return result;
+ } /* decimal64Canonical */
+
+#if DECTRACE || DECCHECK
+/* Macros for accessing decimal64 fields. These assume the
+ argument is a reference (pointer) to the decimal64 structure,
+ and the decimal64 is in network byte order (big-endian) */
+/* Get sign */
+#define decimal64Sign(d) ((unsigned)(d)->bytes[0]>>7)
+
+/* Get combination field */
+#define decimal64Comb(d) (((d)->bytes[0] & 0x7c)>>2)
+
+/* Get exponent continuation [does not remove bias] */
+#define decimal64ExpCon(d) ((((d)->bytes[0] & 0x03)<<6) \
+ | ((unsigned)(d)->bytes[1]>>2))
+
+/* Set sign [this assumes sign previously 0] */
+#define decimal64SetSign(d, b) { \
+ (d)->bytes[0]|=((unsigned)(b)<<7);}
+
+/* Set exponent continuation [does not apply bias] */
+/* This assumes range has been checked and exponent previously 0; */
+/* type of exponent must be unsigned */
+#define decimal64SetExpCon(d, e) { \
+ (d)->bytes[0]|=(uint8_t)((e)>>6); \
+ (d)->bytes[1]|=(uint8_t)(((e)&0x3F)<<2);}
+
+/* ------------------------------------------------------------------ */
+/* decimal64Show -- display a decimal64 in hexadecimal [debug aid] */
+/* d64 -- the number to show */
+/* ------------------------------------------------------------------ */
+/* Also shows sign/cob/expconfields extracted */
+void decimal64Show(const decimal64 *d64) {
+ char buf[DECIMAL64_Bytes*2+1];
+ Int i, j=0;
+
+ if (DECLITEND) {
+ for (i=0; i<DECIMAL64_Bytes; i++, j+=2) {
+ sprintf(&buf[j], "%02x", d64->bytes[7-i]);
+ }
+ printf(" D64> %s [S:%d Cb:%02x Ec:%02x] LittleEndian\n", buf,
+ d64->bytes[7]>>7, (d64->bytes[7]>>2)&0x1f,
+ ((d64->bytes[7]&0x3)<<6)| (d64->bytes[6]>>2));
+ }
+ else { /* big-endian */
+ for (i=0; i<DECIMAL64_Bytes; i++, j+=2) {
+ sprintf(&buf[j], "%02x", d64->bytes[i]);
+ }
+ printf(" D64> %s [S:%d Cb:%02x Ec:%02x] BigEndian\n", buf,
+ decimal64Sign(d64), decimal64Comb(d64), decimal64ExpCon(d64));
+ }
+ } /* decimal64Show */
+#endif
+
+/* ================================================================== */
+/* Shared utility routines and tables */
+/* ================================================================== */
+/* define and include the conversion tables to use for shared code */
+#if DECDPUN==3
+ #define DEC_DPD2BIN 1
+#else
+ #define DEC_DPD2BCD 1
+#endif
+#include "decDPD.h" /* lookup tables */
+
+/* The maximum number of decNumberUnits needed for a working copy of */
+/* the units array is the ceiling of digits/DECDPUN, where digits is */
+/* the maximum number of digits in any of the formats for which this */
+/* is used. decimal128.h must not be included in this module, so, as */
+/* a very special case, that number is defined as a literal here. */
+#define DECMAX754 34
+#define DECMAXUNITS ((DECMAX754+DECDPUN-1)/DECDPUN)
+
+/* ------------------------------------------------------------------ */
+/* Combination field lookup tables (uInts to save measurable work) */
+/* */
+/* COMBEXP - 2-bit most-significant-bits of exponent */
+/* [11 if an Infinity or NaN] */
+/* COMBMSD - 4-bit most-significant-digit */
+/* [0=Infinity, 1=NaN if COMBEXP=11] */
+/* */
+/* Both are indexed by the 5-bit combination field (0-31) */
+/* ------------------------------------------------------------------ */
+const uInt COMBEXP[32]={0, 0, 0, 0, 0, 0, 0, 0,
+ 1, 1, 1, 1, 1, 1, 1, 1,
+ 2, 2, 2, 2, 2, 2, 2, 2,
+ 0, 0, 1, 1, 2, 2, 3, 3};
+const uInt COMBMSD[32]={0, 1, 2, 3, 4, 5, 6, 7,
+ 0, 1, 2, 3, 4, 5, 6, 7,
+ 0, 1, 2, 3, 4, 5, 6, 7,
+ 8, 9, 8, 9, 8, 9, 0, 1};
+
+/* ------------------------------------------------------------------ */
+/* decDigitsToDPD -- pack coefficient into DPD form */
+/* */
+/* dn is the source number (assumed valid, max DECMAX754 digits) */
+/* targ is 1, 2, or 4-element uInt array, which the caller must */
+/* have cleared to zeros */
+/* shift is the number of 0 digits to add on the right (normally 0) */
+/* */
+/* The coefficient must be known small enough to fit. The full */
+/* coefficient is copied, including the leading 'odd' digit. This */
+/* digit is retrieved and packed into the combination field by the */
+/* caller. */
+/* */
+/* The target uInts are altered only as necessary to receive the */
+/* digits of the decNumber. When more than one uInt is needed, they */
+/* are filled from left to right (that is, the uInt at offset 0 will */
+/* end up with the least-significant digits). */
+/* */
+/* shift is used for 'fold-down' padding. */
+/* */
+/* No error is possible. */
+/* ------------------------------------------------------------------ */
+#if DECDPUN<=4
+/* Constant multipliers for divide-by-power-of five using reciprocal */
+/* multiply, after removing powers of 2 by shifting, and final shift */
+/* of 17 [we only need up to **4] */
+static const uInt multies[]={131073, 26215, 5243, 1049, 210};
+/* QUOT10 -- macro to return the quotient of unit u divided by 10**n */
+#define QUOT10(u, n) ((((uInt)(u)>>(n))*multies[n])>>17)
+#endif
+void decDigitsToDPD(const decNumber *dn, uInt *targ, Int shift) {
+ Int cut; /* work */
+ Int n; /* output bunch counter */
+ Int digits=dn->digits; /* digit countdown */
+ uInt dpd; /* densely packed decimal value */
+ uInt bin; /* binary value 0-999 */
+ uInt *uout=targ; /* -> current output uInt */
+ uInt uoff=0; /* -> current output offset [from right] */
+ const Unit *inu=dn->lsu; /* -> current input unit */
+ Unit uar[DECMAXUNITS]; /* working copy of units, iff shifted */
+ #if DECDPUN!=3 /* not fast path */
+ Unit in; /* current unit */
+ #endif
+
+ if (shift!=0) { /* shift towards most significant required */
+ /* shift the units array to the left by pad digits and copy */
+ /* [this code is a special case of decShiftToMost, which could */
+ /* be used instead if exposed and the array were copied first] */
+ const Unit *source; /* .. */
+ Unit *target, *first; /* .. */
+ uInt next=0; /* work */
+
+ source=dn->lsu+D2U(digits)-1; /* where msu comes from */
+ target=uar+D2U(digits)-1+D2U(shift);/* where upper part of first cut goes */
+ cut=DECDPUN-MSUDIGITS(shift); /* where to slice */
+ if (cut==0) { /* unit-boundary case */
+ for (; source>=dn->lsu; source--, target--) *target=*source;
+ }
+ else {
+ first=uar+D2U(digits+shift)-1; /* where msu will end up */
+ for (; source>=dn->lsu; source--, target--) {
+ /* split the source Unit and accumulate remainder for next */
+ #if DECDPUN<=4
+ uInt quot=QUOT10(*source, cut);
+ uInt rem=*source-quot*DECPOWERS[cut];
+ next+=quot;
+ #else
+ uInt rem=*source%DECPOWERS[cut];
+ next+=*source/DECPOWERS[cut];
+ #endif
+ if (target<=first) *target=(Unit)next; /* write to target iff valid */
+ next=rem*DECPOWERS[DECDPUN-cut]; /* save remainder for next Unit */
+ }
+ } /* shift-move */
+ /* propagate remainder to one below and clear the rest */
+ for (; target>=uar; target--) {
+ *target=(Unit)next;
+ next=0;
+ }
+ digits+=shift; /* add count (shift) of zeros added */
+ inu=uar; /* use units in working array */
+ }
+
+ /* now densely pack the coefficient into DPD declets */
+
+ #if DECDPUN!=3 /* not fast path */
+ in=*inu; /* current unit */
+ cut=0; /* at lowest digit */
+ bin=0; /* [keep compiler quiet] */
+ #endif
+
+ for(n=0; digits>0; n++) { /* each output bunch */
+ #if DECDPUN==3 /* fast path, 3-at-a-time */
+ bin=*inu; /* 3 digits ready for convert */
+ digits-=3; /* [may go negative] */
+ inu++; /* may need another */
+
+ #else /* must collect digit-by-digit */
+ Unit dig; /* current digit */
+ Int j; /* digit-in-declet count */
+ for (j=0; j<3; j++) {
+ #if DECDPUN<=4
+ Unit temp=(Unit)((uInt)(in*6554)>>16);
+ dig=(Unit)(in-X10(temp));
+ in=temp;
+ #else
+ dig=in%10;
+ in=in/10;
+ #endif
+ if (j==0) bin=dig;
+ else if (j==1) bin+=X10(dig);
+ else /* j==2 */ bin+=X100(dig);
+ digits--;
+ if (digits==0) break; /* [also protects *inu below] */
+ cut++;
+ if (cut==DECDPUN) {inu++; in=*inu; cut=0;}
+ }
+ #endif
+ /* here there are 3 digits in bin, or have used all input digits */
+
+ dpd=BIN2DPD[bin];
+
+ /* write declet to uInt array */
+ *uout|=dpd<<uoff;
+ uoff+=10;
+ if (uoff<32) continue; /* no uInt boundary cross */
+ uout++;
+ uoff-=32;
+ *uout|=dpd>>(10-uoff); /* collect top bits */
+ } /* n declets */
+ return;
+ } /* decDigitsToDPD */
+
+/* ------------------------------------------------------------------ */
+/* decDigitsFromDPD -- unpack a format's coefficient */
+/* */
+/* dn is the target number, with 7, 16, or 34-digit space. */
+/* sour is a 1, 2, or 4-element uInt array containing only declets */
+/* declets is the number of (right-aligned) declets in sour to */
+/* be processed. This may be 1 more than the obvious number in */
+/* a format, as any top digit is prefixed to the coefficient */
+/* continuation field. It also may be as small as 1, as the */
+/* caller may pre-process leading zero declets. */
+/* */
+/* When doing the 'extra declet' case care is taken to avoid writing */
+/* extra digits when there are leading zeros, as these could overflow */
+/* the units array when DECDPUN is not 3. */
+/* */
+/* The target uInts are used only as necessary to process declets */
+/* declets into the decNumber. When more than one uInt is needed, */
+/* they are used from left to right (that is, the uInt at offset 0 */
+/* provides the least-significant digits). */
+/* */
+/* dn->digits is set, but not the sign or exponent. */
+/* No error is possible [the redundant 888 codes are allowed]. */
+/* ------------------------------------------------------------------ */
+void decDigitsFromDPD(decNumber *dn, const uInt *sour, Int declets) {
+
+ uInt dpd; /* collector for 10 bits */
+ Int n; /* counter */
+ Unit *uout=dn->lsu; /* -> current output unit */
+ Unit *last=uout; /* will be unit containing msd */
+ const uInt *uin=sour; /* -> current input uInt */
+ uInt uoff=0; /* -> current input offset [from right] */
+
+ #if DECDPUN!=3
+ uInt bcd; /* BCD result */
+ uInt nibble; /* work */
+ Unit out=0; /* accumulator */
+ Int cut=0; /* power of ten in current unit */
+ #endif
+ #if DECDPUN>4
+ uInt const *pow; /* work */
+ #endif
+
+ /* Expand the densely-packed integer, right to left */
+ for (n=declets-1; n>=0; n--) { /* count down declets of 10 bits */
+ dpd=*uin>>uoff;
+ uoff+=10;
+ if (uoff>32) { /* crossed uInt boundary */
+ uin++;
+ uoff-=32;
+ dpd|=*uin<<(10-uoff); /* get waiting bits */
+ }
+ dpd&=0x3ff; /* clear uninteresting bits */
+
+ #if DECDPUN==3
+ if (dpd==0) *uout=0;
+ else {
+ *uout=DPD2BIN[dpd]; /* convert 10 bits to binary 0-999 */
+ last=uout; /* record most significant unit */
+ }
+ uout++;
+ } /* n */
+
+ #else /* DECDPUN!=3 */
+ if (dpd==0) { /* fastpath [e.g., leading zeros] */
+ /* write out three 0 digits (nibbles); out may have digit(s) */
+ cut++;
+ if (cut==DECDPUN) {*uout=out; if (out) {last=uout; out=0;} uout++; cut=0;}
+ if (n==0) break; /* [as below, works even if MSD=0] */
+ cut++;
+ if (cut==DECDPUN) {*uout=out; if (out) {last=uout; out=0;} uout++; cut=0;}
+ cut++;
+ if (cut==DECDPUN) {*uout=out; if (out) {last=uout; out=0;} uout++; cut=0;}
+ continue;
+ }
+
+ bcd=DPD2BCD[dpd]; /* convert 10 bits to 12 bits BCD */
+
+ /* now accumulate the 3 BCD nibbles into units */
+ nibble=bcd & 0x00f;
+ if (nibble) out=(Unit)(out+nibble*DECPOWERS[cut]);
+ cut++;
+ if (cut==DECDPUN) {*uout=out; if (out) {last=uout; out=0;} uout++; cut=0;}
+ bcd>>=4;
+
+ /* if this is the last declet and the remaining nibbles in bcd */
+ /* are 00 then process no more nibbles, because this could be */
+ /* the 'odd' MSD declet and writing any more Units would then */
+ /* overflow the unit array */
+ if (n==0 && !bcd) break;
+
+ nibble=bcd & 0x00f;
+ if (nibble) out=(Unit)(out+nibble*DECPOWERS[cut]);
+ cut++;
+ if (cut==DECDPUN) {*uout=out; if (out) {last=uout; out=0;} uout++; cut=0;}
+ bcd>>=4;
+
+ nibble=bcd & 0x00f;
+ if (nibble) out=(Unit)(out+nibble*DECPOWERS[cut]);
+ cut++;
+ if (cut==DECDPUN) {*uout=out; if (out) {last=uout; out=0;} uout++; cut=0;}
+ } /* n */
+ if (cut!=0) { /* some more left over */
+ *uout=out; /* write out final unit */
+ if (out) last=uout; /* and note if non-zero */
+ }
+ #endif
+
+ /* here, last points to the most significant unit with digits; */
+ /* inspect it to get the final digits count -- this is essentially */
+ /* the same code as decGetDigits in decNumber.c */
+ dn->digits=(last-dn->lsu)*DECDPUN+1; /* floor of digits, plus */
+ /* must be at least 1 digit */
+ #if DECDPUN>1
+ if (*last<10) return; /* common odd digit or 0 */
+ dn->digits++; /* must be 2 at least */
+ #if DECDPUN>2
+ if (*last<100) return; /* 10-99 */
+ dn->digits++; /* must be 3 at least */
+ #if DECDPUN>3
+ if (*last<1000) return; /* 100-999 */
+ dn->digits++; /* must be 4 at least */
+ #if DECDPUN>4
+ for (pow=&DECPOWERS[4]; *last>=*pow; pow++) dn->digits++;
+ #endif
+ #endif
+ #endif
+ #endif
+ return;
+ } /*decDigitsFromDPD */
diff --git a/libdecnumber/dpd/decimal64.h b/libdecnumber/dpd/decimal64.h
new file mode 100644
index 0000000..549b626
--- /dev/null
+++ b/libdecnumber/dpd/decimal64.h
@@ -0,0 +1,101 @@
+/* Decimal 64-bit format module header for the decNumber C Library.
+ Copyright (C) 2005, 2007 Free Software Foundation, Inc.
+ Contributed by IBM Corporation. Author Mike Cowlishaw.
+
+ This file is part of GCC.
+
+ GCC is free software; you can redistribute it and/or modify it under
+ the terms of the GNU General Public License as published by the Free
+ Software Foundation; either version 2, or (at your option) any later
+ version.
+
+ In addition to the permissions in the GNU General Public License,
+ the Free Software Foundation gives you unlimited permission to link
+ the compiled version of this file into combinations with other
+ programs, and to distribute those combinations without any
+ restriction coming from the use of this file. (The General Public
+ License restrictions do apply in other respects; for example, they
+ cover modification of the file, and distribution when not linked
+ into a combine executable.)
+
+ GCC is distributed in the hope that it will be useful, but WITHOUT ANY
+ WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
+ for more details.
+
+ You should have received a copy of the GNU General Public License
+ along with GCC; see the file COPYING. If not, write to the Free
+ Software Foundation, 51 Franklin Street, Fifth Floor, Boston, MA
+ 02110-1301, USA. */
+
+/* ------------------------------------------------------------------ */
+/* Decimal 64-bit format module header */
+/* ------------------------------------------------------------------ */
+
+#if !defined(DECIMAL64)
+ #define DECIMAL64
+ #define DEC64NAME "decimal64" /* Short name */
+ #define DEC64FULLNAME "Decimal 64-bit Number" /* Verbose name */
+ #define DEC64AUTHOR "Mike Cowlishaw" /* Who to blame */
+
+
+ /* parameters for decimal64s */
+ #define DECIMAL64_Bytes 8 /* length */
+ #define DECIMAL64_Pmax 16 /* maximum precision (digits) */
+ #define DECIMAL64_Emax 384 /* maximum adjusted exponent */
+ #define DECIMAL64_Emin -383 /* minimum adjusted exponent */
+ #define DECIMAL64_Bias 398 /* bias for the exponent */
+ #define DECIMAL64_String 24 /* maximum string length, +1 */
+ #define DECIMAL64_EconL 8 /* exp. continuation length */
+ /* highest biased exponent (Elimit-1) */
+ #define DECIMAL64_Ehigh (DECIMAL64_Emax+DECIMAL64_Bias-DECIMAL64_Pmax+1)
+
+ /* check enough digits, if pre-defined */
+ #if defined(DECNUMDIGITS)
+ #if (DECNUMDIGITS<DECIMAL64_Pmax)
+ #error decimal64.h needs pre-defined DECNUMDIGITS>=16 for safe use
+ #endif
+ #endif
+
+
+ #ifndef DECNUMDIGITS
+ #define DECNUMDIGITS DECIMAL64_Pmax /* size if not already defined*/
+ #endif
+ #ifndef DECNUMBER
+ #include "decNumber.h" /* context and number library */
+ #endif
+
+ /* Decimal 64-bit type, accessible by bytes */
+ typedef struct {
+ uint8_t bytes[DECIMAL64_Bytes]; /* decimal64: 1, 5, 8, 50 bits*/
+ } decimal64;
+
+ /* special values [top byte excluding sign bit; last two bits are */
+ /* don't-care for Infinity on input, last bit don't-care for NaN] */
+ #if !defined(DECIMAL_NaN)
+ #define DECIMAL_NaN 0x7c /* 0 11111 00 NaN */
+ #define DECIMAL_sNaN 0x7e /* 0 11111 10 sNaN */
+ #define DECIMAL_Inf 0x78 /* 0 11110 00 Infinity */
+ #endif
+
+ /* ---------------------------------------------------------------- */
+ /* Routines */
+ /* ---------------------------------------------------------------- */
+
+ #include "decimal64Symbols.h"
+
+ /* String conversions */
+ decimal64 * decimal64FromString(decimal64 *, const char *, decContext *);
+ char * decimal64ToString(const decimal64 *, char *);
+ char * decimal64ToEngString(const decimal64 *, char *);
+
+ /* decNumber conversions */
+ decimal64 * decimal64FromNumber(decimal64 *, const decNumber *,
+ decContext *);
+ decNumber * decimal64ToNumber(const decimal64 *, decNumber *);
+
+ /* Format-dependent utilities */
+ uint32_t decimal64IsCanonical(const decimal64 *);
+ decimal64 * decimal64Canonical(decimal64 *, const decimal64 *);
+
+#endif
diff --git a/libdecnumber/dpd/decimal64Symbols.h b/libdecnumber/dpd/decimal64Symbols.h
new file mode 100644
index 0000000..cf965bf
--- /dev/null
+++ b/libdecnumber/dpd/decimal64Symbols.h
@@ -0,0 +1,16 @@
+#if !defined(DECIMAL64SYMBOLS)
+#define DECIMAL64SYMBOLS
+
+#ifdef IN_LIBGCC2
+#define decDigitsFromDPD __decDigitsFromDPD
+#define decDigitsToDPD __decDigitsToDPD
+#define decimal64Canonical __decimal64Canonical
+#define decimal64FromNumber __decimal64FromNumber
+#define decimal64FromString __decimal64FromString
+#define decimal64IsCanonical __decimal64IsCanonical
+#define decimal64ToEngString __decimal64ToEngString
+#define decimal64ToNumber __decimal64ToNumber
+#define decimal64ToString __decimal64ToString
+#endif
+
+#endif
diff --git a/src-release b/src-release
index 98fa4f4..8b31442 100644
--- a/src-release
+++ b/src-release
@@ -271,7 +271,7 @@ gnats.tar.bz2: $(DIST_SUPPORT) $(GNATS_SUPPORT_DIRS) gnats
SUPPORT_FILES="$(GNATS_SUPPORT_DIRS)"
.PHONY: gdb.tar.bz2
-GDB_SUPPORT_DIRS= bfd include libiberty opcodes readline sim intl
+GDB_SUPPORT_DIRS= bfd include libiberty opcodes readline sim intl libdecnumber
gdb.tar.bz2: $(DIST_SUPPORT) $(GDB_SUPPORT_DIRS) gdb
$(MAKE) -f $(SELF) gdb-taz TOOL=gdb \
MD5PROG="$(MD5PROG)" \