diff options
-rwxr-xr-x | configure | 129 |
1 files changed, 0 insertions, 129 deletions
@@ -59,19 +59,13 @@ fatal= floating_point=default gas=default hosts= -#hostsubdir= -#namesubdir= next_prefix= next_host= -#next_namesubdir= -#next_objdir= next_site= next_srcdir= next_target= next_tmpdir= norecursion= -#objdir= -#objdiroption= prefix=/usr/local progname= recurring= @@ -80,7 +74,6 @@ srcdir= srctrigger= target= targets= -#targetsubdir= undefinedargs= verbose= version="$Revision$" @@ -116,9 +109,6 @@ do # handle things that might have args following as separate words if [ -n "${next_prefix}" ] ; then prefix=${arg} ; prefixoption="-prefix=${prefix}" ; next_prefix= elif [ -n "${next_datadir}" ] ; then datadir=${arg} ; datadiroption="-datadir=${datadir}" ; next_datadir= -# elif [ -n "${next_namesubdir}" ] ; then \ -# namesubdir=${arg} ; namesubdiroption="--namesubdir=${namesubdir}" ; next_namesubdir= -# elif [ -n "${next_objdir}" ] ; then objdir=${arg} ; objdiroption="--objdir=${objdir}" ; next_objdir= elif [ -n "${next_site}" ] ; then site=${arg} ; next_site= elif [ -n "${next_srcdir}" ] ; then srcdir=${arg} ; next_srcdir= elif [ -n "${next_target}" ] ; then @@ -151,10 +141,6 @@ do fatal=true ;; -host=* | --host=* | --hos=* | --ho=*) -# if [ -n "${hosts}" ] ; then -# subdirs="--subdirs" -# fi - if [ -z "${hosts}" ] ; then newhosts="${hosts} `echo ${arg} | sed 's/^[-a-z]*=//'`" hosts="${newhosts}" @@ -163,26 +149,12 @@ do fatal=yes fi ;; -# -namesubdir | --namesubdir | --namesubdi | --namesubd | --namesub | --namesu | --names | --name | --nam | --na) -# next_namesubdir=yes -# ;; -# -namesubdir=* | --namesubdir=* | --namesubdi=* | --namesubd=* | --namesub=* | --namesu=* | --names=* | --name=* | --nam=* | --na=*) -# namesubdir=`echo ${arg} | sed 's/^[-a-z]*=//'` -# namesubdiroption=${arg} -# ;; -nfp | --nf*) floating_point=no ;; -norecursion | --no*) norecursion=true ;; -# -objdir=* | --objdir=* | --objdi=* | --objd=* | --obj=* | --ob=* | --o=*) -# objdiroption=${arg} -# objdir=`echo ${arg} | sed 's/^[-a-z]*=//'` -# ;; -# -objdir | --objdir | --objdi | --objd | --obj | --ob | --o) -# next_objdir=yes -# ;; -prefix=* | --prefix=* | --prefi=* | --pref=* | --pre=* | --pr=* | --p=*) prefix=`echo ${arg} | sed 's/^[-a-z]*=//'` prefixoption=${arg} @@ -209,14 +181,7 @@ do -srcdir | --srcdir | --srcdi | --srcd | --src | --sr) next_srcdir=yes ;; -# -subdirs | --su*) -# subdirs=${arg} -# ;; -target=* | --target=* | --targe=* | --targ=* | --tar=* | --ta=*) -# if [ -n "${targets}" ] ; then -# subdirs="--subdirs" -# fi - if [ -z "${targets}" ] ; then newtargets="${targets} `echo ${arg} | sed 's/^[-a-z]*=//'`" targets="${newtargets}" @@ -250,10 +215,6 @@ do fatal=true ;; *) -# if [ -n "${hosts}" ] ; then -# subdirs="--subdirs" -# fi - if [ -z "${undefs}" ] ; then newundefs="${undefs} ${arg}" undefs=${newundefs} @@ -315,19 +276,14 @@ if [ -n "${fatal}" -o "${hosts}" = "help" ] ; then echo " -lang=LANG configure to build LANG. [gcc]" ; echo " -nfp configure the compilers default to soft floating point. [hard float]" ; echo " -norecursion configure this directory only. [recurse]" ; -# echo " -objdir=ODIR configure in a parallel tree rooted in ODIR. [rooted in \".\"]" ; echo " -prefix=MYDIR configure for installation of host dependent files into MYDIR. [\"/usr/local\"]" ; echo " -rm remove this configuration. [build a configuration]" ; echo " -site configure with site specific makefile" ; echo " -srcdir=DIR find the sources in DIR. [\".\" or \"..\"]" ; -# This is correctly aligned in the output, even though it isn't here. -# echo " -subdirs configure in subdirectories. [in source directories]" ; echo " -target=TARGET configure for TARGET. [TARGET = HOST]" ; echo " -tmpdir=TMPDIR create temporary files in TMPDIR. [ TMPDIR = \"/tmp\" ]" ; echo ; echo "Where HOST and TARGET are something like \"vax\", \"sun3\", \"encore\", etc." ; -# echo "Asking for more than one \"--target\" implies \"--subdirs\". Any other" ; -# echo "options given will apply to all targets." ) 1>&2 if [ -r config.status ] ; then @@ -446,63 +402,8 @@ for host in ${hosts} ; do fi if [ -n "${removing}" ] ; then -# if [ -n "${objdir}" ] ; then -# echo '***' --rm not supported for --objdir. Just \"rm -rf ${objdir}\" by hand. -# exit 1 -# fi - -# if [ -n "${subdirs}" ] ; then -# if [ -d "${subdirname}" ] ; then -# rm -rf ${hostsubdir} -# else -# echo Warning: no ${PWD}/${hostsubdir} to remove. -# fi -# else rm -f ${Makefile} config.status ${links} -# fi else -# if [ -n "${objdir}" ]; then -# srcdir=${PWD} -# cd ${objdir} -# fi - -# if [ -n "${subdirs}" ] ; then -# # check for existing status before allowing forced subdirs. -# if [ -f ${Makefile} ] ; then -# echo '***' "${Makefile} already exists in source directory. ${PWD} not configured." 1>&2 -# exit 1 -# fi -# -# # use a subdir common to all targets for this host iff: this is a cross AND -# # this tool does not claim to be target dependent AND we have not been asked to name the subdir. -# if [ ${host_alias} != ${target_alias} -a -z "${target_dependent}" -a -z "${namesubdiroption}" ] -# then -# if [ ! -d H-${host_alias} ] ; then mkdir H-${host_alias} ; fi -# -# if ${symbolic_link} ${subdirname} H-${host_alias} 2> /dev/null ; then -# true -# else # just give up. they lose. -# rmdir H-${host_alias} -# if [ ! -d ${subdirname} ] ; then mkdir ${subdirname} ; fi -# fi -# elif [ ! -d ${subdirname} ] ; then -# mkdir ${subdirname} -# fi -# -# cd ${subdirname} -# -# if [ -z "${srcdir}" ] ; then -# srcdir=.. -# fi -# elif [ "`echo H-*`" != "H-*" -a "`echo X-*`" != "X-*" ] ; then -# # if not subdir builds, then make sure none exist. -# # We might miss if there are explicitly named subdirs. -# echo '***' "Configured subdirs exist. ${PWD} not configured." 1>&2 -# exit 1 -# else -# true -# fi - # Find the source files, if location was not specified. if [ -z "${srcdir}" ] ; then srcdirdefaulted=1 @@ -596,15 +497,9 @@ for host in ${hosts} ; do echo "target_vendor = ${target_vendor}" >> ${Makefile} echo "target_os = ${target_os}" >> ${Makefile} -# if [ -n "${subdirs}" ] ; then -# echo "subdir = /${subdirname}" >> ${Makefile} -# echo "unsubdir = .." >> ${Makefile} -# else echo "subdir =" >> ${Makefile} echo "unsubdir = ." >> ${Makefile} -# fi - # echo "workdir = ${PWD}" >> ${Makefile} echo "VPATH = ${srcdir}" >> ${Makefile} # add "Makefile.in" (or whatever it's called) @@ -713,8 +608,6 @@ ${progname}" ${arguments} " # ${using}" > config.status chmod a+x config.status -# originaldir=${PWD} -# cd ${srcdir} fi # If there are subdirectories, then recur. @@ -764,28 +657,6 @@ ${progname}" ${arguments} " done fi done # for each target - - # Now build a Makefile for this host. -# if [ -n "${subdirs}" -a ! -n "${removing}" ] ; then -# push=${PWD} -# -# if [ -n "${objdir}" ] ; then -# cd ${objdir} -# fi -# -# cd ${hostsubdir} -# cat > GNUmakefile << 'E!O!F' -## Makefile generated by configure for host ${host_alias}. -# -#ALL := $(shell ls -d T-*) -# -#%: -# $(foreach subdir,$(ALL),$(MAKE) -C $(subdir) \$@ &&) true -# -#all: -#E!O!F -# cd ${push} -# fi done # for each host ### clean up. |