diff options
25 files changed, 694 insertions, 25 deletions
diff --git a/bfd/ChangeLog b/bfd/ChangeLog index 4fc1bc0..e7a4664 100644 --- a/bfd/ChangeLog +++ b/bfd/ChangeLog @@ -1,3 +1,17 @@ +2017-01-30 Maciej W. Rozycki <macro@imgtec.com> + + * elfxx-mips.h (_bfd_mips_elf_insn32): Rename prototype to... + (_bfd_mips_elf_linker_flags): ... this. Add another parameter. + * elfxx-mips.c (mips_elf_link_hash_table): Add + `ignore_branch_isa' member. + (mips_elf_perform_relocation): Do not treat an ISA mode mismatch + in branch relocation calculation as an error if + `ignore_branch_isa' has been set. + (_bfd_mips_elf_insn32): Rename to... + (_bfd_mips_elf_linker_flags): ... this. Rename the `on' + parameter to `insn32' and add an `ignore_branch_isa' parameter. + Handle the new parameter. + 2017-01-27 Hans-Peter Nilsson <hp@axis.com> * elf32-cris.c (elf_cris_finish_dynamic_symbol): Remove now unused diff --git a/bfd/elfxx-mips.c b/bfd/elfxx-mips.c index ce58c43..bda02b1 100644 --- a/bfd/elfxx-mips.c +++ b/bfd/elfxx-mips.c @@ -443,6 +443,9 @@ struct mips_elf_link_hash_table /* True if we can only use 32-bit microMIPS instructions. */ bfd_boolean insn32; + /* True if we suppress checks for invalid branches between ISA modes. */ + bfd_boolean ignore_branch_isa; + /* True if we're generating code for VxWorks. */ bfd_boolean is_vxworks; @@ -6416,31 +6419,33 @@ mips_elf_perform_relocation (struct bfd_link_info *info, value <<= 2; } - if (bfd_link_pic (info) || !ok) + if (ok && !bfd_link_pic (info)) { - info->callbacks->einfo - (_("%X%H: Unsupported branch between ISA modes\n"), - input_bfd, input_section, relocation->r_offset); - return TRUE; - } + addr = (input_section->output_section->vma + + input_section->output_offset + + relocation->r_offset + + 4); + dest = addr + (((value & 0x3ffff) ^ 0x20000) - 0x20000); - addr = (input_section->output_section->vma - + input_section->output_offset - + relocation->r_offset - + 4); - dest = addr + (((value & 0x3ffff) ^ 0x20000) - 0x20000); + if ((addr >> 28) << 28 != (dest >> 28) << 28) + { + info->callbacks->einfo + (_("%X%H: Cannot convert branch between ISA modes " + "to JALX: relocation out of range\n"), + input_bfd, input_section, relocation->r_offset); + return TRUE; + } - if ((addr >> 28) << 28 != (dest >> 28) << 28) + /* Make this the JALX opcode. */ + x = ((dest >> 2) & 0x3ffffff) | jalx_opcode << 26; + } + else if (!mips_elf_hash_table (info)->ignore_branch_isa) { info->callbacks->einfo - (_("%X%H: Cannot convert branch between ISA modes " - "to JALX: relocation out of range\n"), + (_("%X%H: Unsupported branch between ISA modes\n"), input_bfd, input_section, relocation->r_offset); return TRUE; } - - /* Make this the JALX opcode. */ - x = ((dest >> 2) & 0x3ffffff) | jalx_opcode << 26; } /* Try converting JAL to BAL and J(AL)R to B(AL), if the target is in @@ -14095,12 +14100,15 @@ _bfd_mips_elf_use_plts_and_copy_relocs (struct bfd_link_info *info) } /* A function that the linker calls to select between all or only - 32-bit microMIPS instructions. */ + 32-bit microMIPS instructions, and between making or ignoring + branch relocation checks for invalid transitions between ISA modes. */ void -_bfd_mips_elf_insn32 (struct bfd_link_info *info, bfd_boolean on) +_bfd_mips_elf_linker_flags (struct bfd_link_info *info, bfd_boolean insn32, + bfd_boolean ignore_branch_isa) { - mips_elf_hash_table (info)->insn32 = on; + mips_elf_hash_table (info)->insn32 = insn32; + mips_elf_hash_table (info)->ignore_branch_isa = ignore_branch_isa; } /* Structure for saying that BFD machine EXTENSION extends BASE. */ diff --git a/bfd/elfxx-mips.h b/bfd/elfxx-mips.h index 8f16cc9..fa5b5d2 100644 --- a/bfd/elfxx-mips.h +++ b/bfd/elfxx-mips.h @@ -150,8 +150,8 @@ extern bfd_boolean _bfd_mips_elf_ignore_undef_symbol (struct elf_link_hash_entry *); extern void _bfd_mips_elf_use_plts_and_copy_relocs (struct bfd_link_info *); -extern void _bfd_mips_elf_insn32 - (struct bfd_link_info *, bfd_boolean); +extern void _bfd_mips_elf_linker_flags + (struct bfd_link_info *, bfd_boolean, bfd_boolean); extern bfd_boolean _bfd_mips_elf_init_stubs (struct bfd_link_info *, asection *(*) (const char *, asection *, asection *)); diff --git a/gas/ChangeLog b/gas/ChangeLog index 0f3c73b..69d7c13 100644 --- a/gas/ChangeLog +++ b/gas/ChangeLog @@ -1,5 +1,33 @@ 2017-01-30 Maciej W. Rozycki <macro@imgtec.com> + * config/tc-mips.c (mips_ignore_branch_isa): New variable. + (options): Add OPTION_IGNORE_BRANCH_ISA and + OPTION_NO_IGNORE_BRANCH_ISA enum values. + (md_longopts): Add "mignore-branch-isa" and + "mno-ignore-branch-isa" options. + (md_parse_option): Handle OPTION_IGNORE_BRANCH_ISA and + OPTION_NO_IGNORE_BRANCH_ISA. + (fix_bad_cross_mode_branch_p): Return FALSE if + `mips_ignore_branch_isa' has been set. + (md_show_usage): Add `-mignore-branch-isa' and + `-mno-ignore-branch-isa'. + + * doc/as.texinfo (Target MIPS options): Add + `-mignore-branch-isa' and `-mno-ignore-branch-isa' options. + (-mignore-branch-isa, -mno-ignore-branch-isa): New options. + * doc/c-mips.texi (MIPS Options): Add `-mignore-branch-isa' and + `-mno-ignore-branch-isa' options. + + * testsuite/gas/mips/branch-local-ignore-2.d: New test. + * testsuite/gas/mips/branch-local-ignore-3.d: New test. + * testsuite/gas/mips/branch-local-ignore-n32-2.d: New test. + * testsuite/gas/mips/branch-local-ignore-n32-3.d: New test. + * testsuite/gas/mips/branch-local-ignore-n64-2.d: New test. + * testsuite/gas/mips/branch-local-ignore-n64-3.d: New test. + * testsuite/gas/mips/mips.exp: Run the new tests. + +2017-01-30 Maciej W. Rozycki <macro@imgtec.com> + * testsuite/gas/mips/branch-local-2.d: New test. * testsuite/gas/mips/branch-local-3.d: New test. * testsuite/gas/mips/branch-local-n32-2.d: New test. diff --git a/gas/config/tc-mips.c b/gas/config/tc-mips.c index 02a4e22..d151b01 100644 --- a/gas/config/tc-mips.c +++ b/gas/config/tc-mips.c @@ -943,6 +943,11 @@ static bfd_boolean mips_fix_cn63xxp1; efficient expansion. */ static int mips_relax_branch; + +/* TRUE if checks are suppressed for invalid branches between ISA modes. + Needed for broken assembly produced by some GCC versions and some + sloppy code out there, where branches to data labels are present. */ +static bfd_boolean mips_ignore_branch_isa; /* The expansion of many macros depends on the type of symbol that they refer to. For example, when generating position-dependent code, @@ -1465,6 +1470,8 @@ enum options OPTION_GP64, OPTION_RELAX_BRANCH, OPTION_NO_RELAX_BRANCH, + OPTION_IGNORE_BRANCH_ISA, + OPTION_NO_IGNORE_BRANCH_ISA, OPTION_INSN32, OPTION_NO_INSN32, OPTION_MSHARED, @@ -1591,6 +1598,8 @@ struct option md_longopts[] = {"mgp64", no_argument, NULL, OPTION_GP64}, {"relax-branch", no_argument, NULL, OPTION_RELAX_BRANCH}, {"no-relax-branch", no_argument, NULL, OPTION_NO_RELAX_BRANCH}, + {"mignore-branch-isa", no_argument, NULL, OPTION_IGNORE_BRANCH_ISA}, + {"mno-ignore-branch-isa", no_argument, NULL, OPTION_NO_IGNORE_BRANCH_ISA}, {"minsn32", no_argument, NULL, OPTION_INSN32}, {"mno-insn32", no_argument, NULL, OPTION_NO_INSN32}, {"mshared", no_argument, NULL, OPTION_MSHARED}, @@ -14499,6 +14508,14 @@ md_parse_option (int c, const char *arg) mips_relax_branch = 0; break; + case OPTION_IGNORE_BRANCH_ISA: + mips_ignore_branch_isa = TRUE; + break; + + case OPTION_NO_IGNORE_BRANCH_ISA: + mips_ignore_branch_isa = FALSE; + break; + case OPTION_INSN32: file_mips_opts.insn32 = TRUE; break; @@ -15133,6 +15150,9 @@ fix_bad_cross_mode_branch_p (fixS *fixP) int other; char *buf; + if (mips_ignore_branch_isa) + return FALSE; + if (!fixP->fx_addsy || S_FORCE_RELOC (fixP->fx_addsy, TRUE)) return FALSE; @@ -19662,6 +19682,8 @@ MIPS options:\n\ -mdouble-float allow 32-bit and 64-bit floating-point operations\n\ --[no-]construct-floats [dis]allow floating point values to be constructed\n\ --[no-]relax-branch [dis]allow out-of-range branches to be relaxed\n\ +-mignore-branch-isa accept invalid branches requiring an ISA mode switch\n\ +-mno-ignore-branch-isa reject invalid branches requiring an ISA mode switch\n\ -mnan=ENCODING select an IEEE 754 NaN encoding convention, either of:\n")); first = 1; diff --git a/gas/doc/as.texinfo b/gas/doc/as.texinfo index 5e30fc4..007332e 100644 --- a/gas/doc/as.texinfo +++ b/gas/doc/as.texinfo @@ -416,6 +416,7 @@ gcc(1), ld(1), and the Info entries for @file{binutils} and @file{ld}. [@b{-mips32r3}] [@b{-mips32r5}] [@b{-mips32r6}] [@b{-mips64}] [@b{-mips64r2}] [@b{-mips64r3}] [@b{-mips64r5}] [@b{-mips64r6}] [@b{-construct-floats}] [@b{-no-construct-floats}] + [@b{-mignore-branch-isa}] [@b{-mno-ignore-branch-isa}] [@b{-mnan=@var{encoding}}] [@b{-trap}] [@b{-no-break}] [@b{-break}] [@b{-no-trap}] [@b{-mips16}] [@b{-no-mips16}] @@ -1546,6 +1547,17 @@ The @samp{--relax-branch} option enables the relaxation of out-of-range branches. By default @samp{--no-relax-branch} is selected, causing any out-of-range branches to produce an error. +@item -mignore-branch-isa +@itemx -mno-ignore-branch-isa +Ignore branch checks for invalid transitions between ISA modes. The +semantics of branches does not provide for an ISA mode switch, so in +most cases the ISA mode a branch has been encoded for has to be the +same as the ISA mode of the branch's target label. Therefore GAS has +checks implemented that verify in branch assembly that the two ISA +modes match. @samp{-mignore-branch-isa} disables these checks. By +default @samp{-mno-ignore-branch-isa} is selected, causing any invalid +branch requiring a transition between ISA modes to produce an error. + @item -mnan=@var{encoding} Select between the IEEE 754-2008 (@option{-mnan=2008}) or the legacy (@option{-mnan=legacy}) NaN encoding format. The latter is the default. diff --git a/gas/doc/c-mips.texi b/gas/doc/c-mips.texi index 04666f4..d9a09f1 100644 --- a/gas/doc/c-mips.texi +++ b/gas/doc/c-mips.texi @@ -472,6 +472,37 @@ Also no MIPS16 branches are ever relaxed. By default @samp{--no-relax-branch} is selected, causing any out-of-range branches to produce an error. +@item -mignore-branch-isa +@itemx -mno-ignore-branch-isa +Ignore branch checks for invalid transitions between ISA modes. + +The semantics of branches does not provide for an ISA mode switch, so in +most cases the ISA mode a branch has been encoded for has to be the same +as the ISA mode of the branch's target label. If the ISA modes do not +match, then such a branch, if taken, will cause the ISA mode to remain +unchanged and instructions that follow will be executed in the wrong ISA +mode causing the program to misbehave or crash. + +In the case of the @code{BAL} instruction it may be possible to relax +it to an equivalent @code{JALX} instruction so that the ISA mode is +switched at the run time as required. For other branches no relaxation +is possible and therefore GAS has checks implemented that verify in +branch assembly that the two ISA modes match, and report an error +otherwise so that the problem with code can be diagnosed at the assembly +time rather than at the run time. + +However some assembly code, including generated code produced by some +versions of GCC, may incorrectly include branches to data labels, which +appear to require a mode switch but are either dead or immediately +followed by valid instructions encoded for the same ISA the branch has +been encoded for. While not strictly correct at the source level such +code will execute as intended, so to help with these cases +@samp{-mignore-branch-isa} is supported which disables ISA mode checks +for branches. + +By default @samp{-mno-ignore-branch-isa} is selected, causing any invalid +branch requiring a transition between ISA modes to produce an error. + @cindex @option{-mnan=} command line option, MIPS @item -mnan=@var{encoding} This option indicates whether the source code uses the IEEE 2008 diff --git a/gas/testsuite/gas/mips/branch-local-ignore-2.d b/gas/testsuite/gas/mips/branch-local-ignore-2.d new file mode 100644 index 0000000..ddac741 --- /dev/null +++ b/gas/testsuite/gas/mips/branch-local-ignore-2.d @@ -0,0 +1,29 @@ +#objdump: -dr --prefix-addresses --show-raw-insn +#name: MIPS branch local symbol relocation 2 (ignore branch ISA) +#as: -32 -mignore-branch-isa +#source: branch-local-2.s + +.*: +file format .*mips.* + +Disassembly of section \.text: + \.\.\. +[0-9a-f]+ <[^>]*> 0000 02d0 not zero,zero +[0-9a-f]+ <[^>]*> 001f 0f3c jr ra +[0-9a-f]+ <[^>]*> 0000 02d0 not zero,zero +[0-9a-f]+ <[^>]*> 0000 0000 nop +[0-9a-f]+ <[^>]*> 00000027 nor zero,zero,zero +[0-9a-f]+ <[^>]*> 1000ffff b 00001014 <bar\+0x4> +[ ]*[0-9a-f]+: R_MIPS_PC16 foo +[0-9a-f]+ <[^>]*> 00000027 nor zero,zero,zero +[0-9a-f]+ <[^>]*> 1443ffff bne v0,v1,0000101c <bar\+0xc> +[ ]*[0-9a-f]+: R_MIPS_PC16 foo +[0-9a-f]+ <[^>]*> 00000027 nor zero,zero,zero +[0-9a-f]+ <[^>]*> 0451ffff bgezal v0,00001024 <bar\+0x14> +[ ]*[0-9a-f]+: R_MIPS_PC16 foo +[0-9a-f]+ <[^>]*> 00000027 nor zero,zero,zero +[0-9a-f]+ <[^>]*> 0450ffff bltzal v0,0000102c <bar\+0x1c> +[ ]*[0-9a-f]+: R_MIPS_PC16 foo +[0-9a-f]+ <[^>]*> 00000027 nor zero,zero,zero +[0-9a-f]+ <[^>]*> 03e00009 jalr zero,ra +[0-9a-f]+ <[^>]*> 00000027 nor zero,zero,zero + \.\.\. diff --git a/gas/testsuite/gas/mips/branch-local-ignore-3.d b/gas/testsuite/gas/mips/branch-local-ignore-3.d new file mode 100644 index 0000000..918a2ce --- /dev/null +++ b/gas/testsuite/gas/mips/branch-local-ignore-3.d @@ -0,0 +1,23 @@ +#objdump: -dr --prefix-addresses --show-raw-insn -mmips:isa32r6 +#name: MIPS branch local symbol relocation 3 (ignore branch ISA) +#as: -32 -mignore-branch-isa +#source: branch-local-3.s + +.*: +file format .*mips.* + +Disassembly of section \.text: + \.\.\. +[0-9a-f]+ <[^>]*> 0000 02d0 not zero,zero +[0-9a-f]+ <[^>]*> 001f 0f3c jr ra +[0-9a-f]+ <[^>]*> 0000 02d0 not zero,zero +[0-9a-f]+ <[^>]*> 0000 0000 nop +[0-9a-f]+ <[^>]*> 00000027 nor zero,zero,zero +[0-9a-f]+ <[^>]*> cbffffff bc 00001014 <bar\+0x4> +[ ]*[0-9a-f]+: R_MIPS_PC26_S2 foo +[0-9a-f]+ <[^>]*> 00000027 nor zero,zero,zero +[0-9a-f]+ <[^>]*> d85fffff beqzc v0,0000101c <bar\+0xc> +[ ]*[0-9a-f]+: R_MIPS_PC21_S2 foo +[0-9a-f]+ <[^>]*> 00000027 nor zero,zero,zero +[0-9a-f]+ <[^>]*> 03e00009 jr ra +[0-9a-f]+ <[^>]*> 00000027 nor zero,zero,zero + \.\.\. diff --git a/gas/testsuite/gas/mips/branch-local-ignore-n32-2.d b/gas/testsuite/gas/mips/branch-local-ignore-n32-2.d new file mode 100644 index 0000000..080402c --- /dev/null +++ b/gas/testsuite/gas/mips/branch-local-ignore-n32-2.d @@ -0,0 +1,29 @@ +#objdump: -dr --prefix-addresses --show-raw-insn +#name: MIPS branch local symbol relocation 2 (ignore branch ISA, n32) +#as: -n32 -march=from-abi -mignore-branch-isa +#source: branch-local-2.s + +.*: +file format .*mips.* + +Disassembly of section \.text: + \.\.\. +[0-9a-f]+ <[^>]*> 0000 02d0 not zero,zero +[0-9a-f]+ <[^>]*> 001f 0f3c jr ra +[0-9a-f]+ <[^>]*> 0000 02d0 not zero,zero +[0-9a-f]+ <[^>]*> 0000 0000 nop +[0-9a-f]+ <[^>]*> 00000027 nor zero,zero,zero +[0-9a-f]+ <[^>]*> 10000000 b 00001018 <bar\+0x8> +[ ]*[0-9a-f]+: R_MIPS_PC16 foo-0x4 +[0-9a-f]+ <[^>]*> 00000027 nor zero,zero,zero +[0-9a-f]+ <[^>]*> 14430000 bne v0,v1,00001020 <bar\+0x10> +[ ]*[0-9a-f]+: R_MIPS_PC16 foo-0x4 +[0-9a-f]+ <[^>]*> 00000027 nor zero,zero,zero +[0-9a-f]+ <[^>]*> 04510000 bgezal v0,00001028 <bar\+0x18> +[ ]*[0-9a-f]+: R_MIPS_PC16 foo-0x4 +[0-9a-f]+ <[^>]*> 00000027 nor zero,zero,zero +[0-9a-f]+ <[^>]*> 04500000 bltzal v0,00001030 <bar\+0x20> +[ ]*[0-9a-f]+: R_MIPS_PC16 foo-0x4 +[0-9a-f]+ <[^>]*> 00000027 nor zero,zero,zero +[0-9a-f]+ <[^>]*> 03e00009 jalr zero,ra +[0-9a-f]+ <[^>]*> 00000027 nor zero,zero,zero + \.\.\. diff --git a/gas/testsuite/gas/mips/branch-local-ignore-n32-3.d b/gas/testsuite/gas/mips/branch-local-ignore-n32-3.d new file mode 100644 index 0000000..a4dbc7f --- /dev/null +++ b/gas/testsuite/gas/mips/branch-local-ignore-n32-3.d @@ -0,0 +1,23 @@ +#objdump: -dr --prefix-addresses --show-raw-insn -mmips:isa32r6 +#name: MIPS branch local symbol relocation 3 (ignore branch ISA, n32) +#as: -n32 -march=from-abi -mignore-branch-isa +#source: branch-local-3.s + +.*: +file format .*mips.* + +Disassembly of section \.text: + \.\.\. +[0-9a-f]+ <[^>]*> 0000 02d0 not zero,zero +[0-9a-f]+ <[^>]*> 001f 0f3c jr ra +[0-9a-f]+ <[^>]*> 0000 02d0 not zero,zero +[0-9a-f]+ <[^>]*> 0000 0000 nop +[0-9a-f]+ <[^>]*> 00000027 nor zero,zero,zero +[0-9a-f]+ <[^>]*> c8000000 bc 00001018 <bar\+0x8> +[ ]*[0-9a-f]+: R_MIPS_PC26_S2 foo-0x4 +[0-9a-f]+ <[^>]*> 00000027 nor zero,zero,zero +[0-9a-f]+ <[^>]*> d8400000 beqzc v0,00001020 <bar\+0x10> +[ ]*[0-9a-f]+: R_MIPS_PC21_S2 foo-0x4 +[0-9a-f]+ <[^>]*> 00000027 nor zero,zero,zero +[0-9a-f]+ <[^>]*> 03e00009 jr ra +[0-9a-f]+ <[^>]*> 00000027 nor zero,zero,zero + \.\.\. diff --git a/gas/testsuite/gas/mips/branch-local-ignore-n64-2.d b/gas/testsuite/gas/mips/branch-local-ignore-n64-2.d new file mode 100644 index 0000000..12cd510 --- /dev/null +++ b/gas/testsuite/gas/mips/branch-local-ignore-n64-2.d @@ -0,0 +1,37 @@ +#objdump: -dr --prefix-addresses --show-raw-insn +#name: MIPS branch local symbol relocation 2 (ignore branch ISA, n64) +#as: -64 -march=from-abi -mignore-branch-isa +#source: branch-local-2.s + +.*: +file format .*mips.* + +Disassembly of section \.text: + \.\.\. +[0-9a-f]+ <[^>]*> 0000 02d0 not zero,zero +[0-9a-f]+ <[^>]*> 001f 0f3c jr ra +[0-9a-f]+ <[^>]*> 0000 02d0 not zero,zero +[0-9a-f]+ <[^>]*> 0000 0000 nop +[0-9a-f]+ <[^>]*> 00000027 nor zero,zero,zero +[0-9a-f]+ <[^>]*> 10000000 b 0000000000001018 <bar\+0x8> +[ ]*[0-9a-f]+: R_MIPS_PC16 foo-0x4 +[ ]*[0-9a-f]+: R_MIPS_NONE \*ABS\*-0x4 +[ ]*[0-9a-f]+: R_MIPS_NONE \*ABS\*-0x4 +[0-9a-f]+ <[^>]*> 00000027 nor zero,zero,zero +[0-9a-f]+ <[^>]*> 14430000 bne v0,v1,0000000000001020 <bar\+0x10> +[ ]*[0-9a-f]+: R_MIPS_PC16 foo-0x4 +[ ]*[0-9a-f]+: R_MIPS_NONE \*ABS\*-0x4 +[ ]*[0-9a-f]+: R_MIPS_NONE \*ABS\*-0x4 +[0-9a-f]+ <[^>]*> 00000027 nor zero,zero,zero +[0-9a-f]+ <[^>]*> 04510000 bgezal v0,0000000000001028 <bar\+0x18> +[ ]*[0-9a-f]+: R_MIPS_PC16 foo-0x4 +[ ]*[0-9a-f]+: R_MIPS_NONE \*ABS\*-0x4 +[ ]*[0-9a-f]+: R_MIPS_NONE \*ABS\*-0x4 +[0-9a-f]+ <[^>]*> 00000027 nor zero,zero,zero +[0-9a-f]+ <[^>]*> 04500000 bltzal v0,0000000000001030 <bar\+0x20> +[ ]*[0-9a-f]+: R_MIPS_PC16 foo-0x4 +[ ]*[0-9a-f]+: R_MIPS_NONE \*ABS\*-0x4 +[ ]*[0-9a-f]+: R_MIPS_NONE \*ABS\*-0x4 +[0-9a-f]+ <[^>]*> 00000027 nor zero,zero,zero +[0-9a-f]+ <[^>]*> 03e00009 jalr zero,ra +[0-9a-f]+ <[^>]*> 00000027 nor zero,zero,zero + \.\.\. diff --git a/gas/testsuite/gas/mips/branch-local-ignore-n64-3.d b/gas/testsuite/gas/mips/branch-local-ignore-n64-3.d new file mode 100644 index 0000000..9d6dca9 --- /dev/null +++ b/gas/testsuite/gas/mips/branch-local-ignore-n64-3.d @@ -0,0 +1,27 @@ +#objdump: -dr --prefix-addresses --show-raw-insn -mmips:isa32r6 +#name: MIPS branch local symbol relocation 3 (ignore branch ISA, n64) +#as: -64 -march=from-abi -mignore-branch-isa +#source: branch-local-3.s + +.*: +file format .*mips.* + +Disassembly of section \.text: + \.\.\. +[0-9a-f]+ <[^>]*> 0000 02d0 not zero,zero +[0-9a-f]+ <[^>]*> 001f 0f3c jr ra +[0-9a-f]+ <[^>]*> 0000 02d0 not zero,zero +[0-9a-f]+ <[^>]*> 0000 0000 nop +[0-9a-f]+ <[^>]*> 00000027 nor zero,zero,zero +[0-9a-f]+ <[^>]*> c8000000 bc 0000000000001018 <bar\+0x8> +[ ]*[0-9a-f]+: R_MIPS_PC26_S2 foo-0x4 +[ ]*[0-9a-f]+: R_MIPS_NONE \*ABS\*-0x4 +[ ]*[0-9a-f]+: R_MIPS_NONE \*ABS\*-0x4 +[0-9a-f]+ <[^>]*> 00000027 nor zero,zero,zero +[0-9a-f]+ <[^>]*> d8400000 beqzc v0,0000000000001020 <bar\+0x10> +[ ]*[0-9a-f]+: R_MIPS_PC21_S2 foo-0x4 +[ ]*[0-9a-f]+: R_MIPS_NONE \*ABS\*-0x4 +[ ]*[0-9a-f]+: R_MIPS_NONE \*ABS\*-0x4 +[0-9a-f]+ <[^>]*> 00000027 nor zero,zero,zero +[0-9a-f]+ <[^>]*> 03e00009 jr ra +[0-9a-f]+ <[^>]*> 00000027 nor zero,zero,zero + \.\.\. diff --git a/gas/testsuite/gas/mips/mips.exp b/gas/testsuite/gas/mips/mips.exp index 4580fbf..5a69542 100644 --- a/gas/testsuite/gas/mips/mips.exp +++ b/gas/testsuite/gas/mips/mips.exp @@ -626,16 +626,22 @@ if { [istarget mips*-*-vxworks*] } { run_dump_test "branch-weak-7" run_dump_test "branch-local-1" run_dump_test "branch-local-2" + run_dump_test "branch-local-ignore-2" run_dump_test "branch-local-3" + run_dump_test "branch-local-ignore-3" run_dump_test "branch-local-4" if $has_newabi { run_dump_test "branch-local-n32-1" run_dump_test "branch-local-n32-2" + run_dump_test "branch-local-ignore-n32-2" run_dump_test "branch-local-n32-3" + run_dump_test "branch-local-ignore-n32-3" run_dump_test "branch-local-n32-4" run_dump_test "branch-local-n64-1" run_dump_test "branch-local-n64-2" + run_dump_test "branch-local-ignore-n64-2" run_dump_test "branch-local-n64-3" + run_dump_test "branch-local-ignore-n64-3" run_dump_test "branch-local-n64-4" } run_dump_test "branch-addend" diff --git a/ld/ChangeLog b/ld/ChangeLog index fec48e2..5c5504c 100644 --- a/ld/ChangeLog +++ b/ld/ChangeLog @@ -1,3 +1,33 @@ +2017-01-30 Maciej W. Rozycki <macro@imgtec.com> + + * emultempl/mipself.em (ignore_branch_isa): New variable. + (mips_create_output_section_statements): Rename + `_bfd_mips_elf_insn32' called to `_bfd_mips_elf_linker_flags', + add `ignore_branch_isa' argument. + (PARSE_AND_LIST_PROLOGUE): Add OPTION_IGNORE_BRANCH_ISA and + OPTION_NO_IGNORE_BRANCH_ISA enum values. + (PARSE_AND_LIST_LONGOPTS): Add "ignore-branch-isa" and + "no-ignore-branch-isa" options. + (PARSE_AND_LIST_OPTIONS): Add `--ignore-branch-isa' and + `--no-ignore-branch-isa'. + (PARSE_AND_LIST_ARGS_CASES): Handle OPTION_IGNORE_BRANCH_ISA and + OPTION_NO_IGNORE_BRANCH_ISA. + + * ld.texinfo (Options specific to MIPS targets): Add + `--ignore-branch-isa' and `--no-ignore-branch-isa' options. + (ld and the MIPS family): Likewise. + + * testsuite/ld-mips-elf/bal-jalx-pic-ignore.d: New test. + * testsuite/ld-mips-elf/bal-jalx-pic-ignore-n32.d: New test. + * testsuite/ld-mips-elf/bal-jalx-pic-ignore-n64.d: New test. + * testsuite/ld-mips-elf/unaligned-branch-ignore-2.d: New test. + * testsuite/ld-mips-elf/unaligned-branch-ignore-r6-1: New test. + * testsuite/ld-mips-elf/unaligned-branch-ignore-mips16: New + test. + * testsuite/ld-mips-elf/unaligned-branch-ignore-micromips: New + test. + * testsuite/ld-mips-elf/mips-elf.exp: Run the new tests. + 2017-01-29 Hans-Peter Nilsson <hp@axis.com> PR binutils/19935 diff --git a/ld/emultempl/mipself.em b/ld/emultempl/mipself.em index 74ede87..cd68707 100644 --- a/ld/emultempl/mipself.em +++ b/ld/emultempl/mipself.em @@ -34,6 +34,7 @@ static lang_input_statement_type *stub_file; static bfd *stub_bfd; static bfd_boolean insn32; +static bfd_boolean ignore_branch_isa; static void mips_after_parse (void) @@ -202,7 +203,7 @@ mips_create_output_section_statements (void) htab = elf_hash_table (&link_info); if (is_elf_hash_table (htab) && is_mips_elf (link_info.output_bfd)) - _bfd_mips_elf_insn32 (&link_info, insn32); + _bfd_mips_elf_linker_flags (&link_info, insn32, ignore_branch_isa); if (is_mips_elf (link_info.output_bfd)) _bfd_mips_elf_init_stubs (&link_info, mips_add_stub_section); @@ -253,13 +254,17 @@ PARSE_AND_LIST_PROLOGUE=' enum { OPTION_INSN32 = 301, - OPTION_NO_INSN32 + OPTION_NO_INSN32, + OPTION_IGNORE_BRANCH_ISA, + OPTION_NO_IGNORE_BRANCH_ISA }; ' PARSE_AND_LIST_LONGOPTS=' { "insn32", no_argument, NULL, OPTION_INSN32 }, { "no-insn32", no_argument, NULL, OPTION_NO_INSN32 }, + { "ignore-branch-isa", no_argument, NULL, OPTION_IGNORE_BRANCH_ISA }, + { "no-ignore-branch-isa", no_argument, NULL, OPTION_NO_IGNORE_BRANCH_ISA }, ' PARSE_AND_LIST_OPTIONS=' @@ -269,6 +274,14 @@ PARSE_AND_LIST_OPTIONS=' fprintf (file, _("\ --no-insn32 Generate all microMIPS instructions\n" )); + fprintf (file, _("\ + --ignore-branch-isa Accept invalid branch relocations requiring\n\ + an ISA mode switch\n" + )); + fprintf (file, _("\ + --no-ignore-branch-isa Reject invalid branch relocations requiring\n\ + an ISA mode switch\n" + )); ' PARSE_AND_LIST_ARGS_CASES=' @@ -279,6 +292,14 @@ PARSE_AND_LIST_ARGS_CASES=' case OPTION_NO_INSN32: insn32 = FALSE; break; + + case OPTION_IGNORE_BRANCH_ISA: + ignore_branch_isa = TRUE; + break; + + case OPTION_NO_IGNORE_BRANCH_ISA: + ignore_branch_isa = FALSE; + break; ' LDEMUL_AFTER_PARSE=mips_after_parse diff --git a/ld/ld.texinfo b/ld/ld.texinfo index 2ce7560..8f2dfdb 100644 --- a/ld/ld.texinfo +++ b/ld/ld.texinfo @@ -3001,7 +3001,8 @@ Info entry for @file{ld}. @c man begin OPTIONS The following options are supported to control microMIPS instruction -generation when linking for MIPS targets. +generation and branch relocation checks for ISA mode transitions when +linking for MIPS targets. @table @gcctabopt @@ -3016,6 +3017,20 @@ or in relaxation. If @samp{--insn32} is used, then the linker only uses used, all instruction encodings are used, including 16-bit ones where possible. +@kindex --ignore-branch-isa +@item --ignore-branch-isa +@kindex --no-ignore-branch-isa +@itemx --no-ignore-branch-isa +These options control branch relocation checks for invalid ISA mode +transitions. If @samp{--ignore-branch-isa} is used, then the linker +accepts any branch relocations and any ISA mode transition required +is lost in relocation calculation, except for some cases of @code{BAL} +instructions which meet relaxation conditions and are converted to +equivalent @code{JALX} instructions as the associated relocation is +calculated. By default or if @samp{--no-ignore-branch-isa} is used +a check is made causing the loss of an ISA mode transition to produce +an error. + @end table @c man end @@ -7062,6 +7077,19 @@ used, then the linker only uses 32-bit instruction encodings. By default or if @samp{--no-insn32} is used, all instruction encodings are used, including 16-bit ones where possible. +@cindex MIPS branch relocation check control +@kindex --ignore-branch-isa +@kindex --no-ignore-branch-isa +The @samp{--ignore-branch-isa} and @samp{--no-ignore-branch-isa} options +control branch relocation checks for invalid ISA mode transitions. If +@samp{--ignore-branch-isa} is used, then the linker accepts any branch +relocations and any ISA mode transition required is lost in relocation +calculation, except for some cases of @code{BAL} instructions which meet +relaxation conditions and are converted to equivalent @code{JALX} +instructions as the associated relocation is calculated. By default +or if @samp{--no-ignore-branch-isa} is used a check is made causing +the loss of an ISA mode transition to produce an error. + @ifclear GENERIC @lowersections @end ifclear diff --git a/ld/testsuite/ld-mips-elf/bal-jalx-pic-ignore-n32.d b/ld/testsuite/ld-mips-elf/bal-jalx-pic-ignore-n32.d new file mode 100644 index 0000000..c402ba8 --- /dev/null +++ b/ld/testsuite/ld-mips-elf/bal-jalx-pic-ignore-n32.d @@ -0,0 +1,6 @@ +#name: MIPS BAL/JALX in PIC mode (ignore branch ISA, n32) +#source: ../../../gas/testsuite/gas/mips/branch-addend.s +#as: -EB -n32 -march=from-abi +#ld: -EB -Ttext 0x1c000000 -e 0x1c000000 -shared --ignore-branch-isa +#objdump: -dr --prefix-addresses --show-raw-insn +#dump: bal-jalx-pic-ignore.d diff --git a/ld/testsuite/ld-mips-elf/bal-jalx-pic-ignore-n64.d b/ld/testsuite/ld-mips-elf/bal-jalx-pic-ignore-n64.d new file mode 100644 index 0000000..e1bbb92 --- /dev/null +++ b/ld/testsuite/ld-mips-elf/bal-jalx-pic-ignore-n64.d @@ -0,0 +1,6 @@ +#name: MIPS BAL/JALX in PIC mode (ignore branch ISA, n64) +#source: ../../../gas/testsuite/gas/mips/branch-addend.s +#as: -EB -64 -march=from-abi +#ld: -EB -Ttext 0x1c000000 -e 0x1c000000 -shared --ignore-branch-isa +#objdump: -dr --prefix-addresses --show-raw-insn +#dump: bal-jalx-pic-ignore.d diff --git a/ld/testsuite/ld-mips-elf/bal-jalx-pic-ignore.d b/ld/testsuite/ld-mips-elf/bal-jalx-pic-ignore.d new file mode 100644 index 0000000..279b87a --- /dev/null +++ b/ld/testsuite/ld-mips-elf/bal-jalx-pic-ignore.d @@ -0,0 +1,22 @@ +#name: MIPS BAL/JALX in PIC mode (ignore branch ISA) +#source: ../../../gas/testsuite/gas/mips/branch-addend.s +#as: -EB -32 +#ld: -EB -Ttext 0x1c000000 -e 0x1c000000 -shared --ignore-branch-isa +#objdump: -dr --prefix-addresses --show-raw-insn + +.*: +file format .*mips.* + +Disassembly of section \.text: + \.\.\. +[0-9a-f]+ <[^>]*> 0000 02d0 not zero,zero +[0-9a-f]+ <[^>]*> 001f 0f3c jr ra +[0-9a-f]+ <[^>]*> 0000 02d0 not zero,zero +[0-9a-f]+ <[^>]*> 0000 0000 nop +[0-9a-f]+ <[^>]*> 00000027 nor zero,zero,zero +[0-9a-f]+ <[^>]*> 04117ffa bal 0*1c021000 <.*> +[0-9a-f]+ <[^>]*> 00000027 nor zero,zero,zero +[0-9a-f]+ <[^>]*> 04117ffc bal 0*1c021010 <.*> +[0-9a-f]+ <[^>]*> 00000027 nor zero,zero,zero +[0-9a-f]+ <[^>]*> 03e00009 jalr zero,ra +[0-9a-f]+ <[^>]*> 00000027 nor zero,zero,zero + \.\.\. diff --git a/ld/testsuite/ld-mips-elf/mips-elf.exp b/ld/testsuite/ld-mips-elf/mips-elf.exp index 5639c84..7fa11c5 100644 --- a/ld/testsuite/ld-mips-elf/mips-elf.exp +++ b/ld/testsuite/ld-mips-elf/mips-elf.exp @@ -216,17 +216,20 @@ run_dump_test "jalx-local" [list [list ld $abi_ldflags(o32)]] run_dump_test "bal-jalx-addend" [list [list ld $abi_ldflags(o32)]] run_dump_test "bal-jalx-local" [list [list ld $abi_ldflags(o32)]] run_dump_test "bal-jalx-pic" [list [list ld $abi_ldflags(o32)]] +run_dump_test "bal-jalx-pic-ignore" [list [list ld $abi_ldflags(o32)]] if $has_newabi { run_dump_test "jalx-addend-n32" [list [list ld $abi_ldflags(n32)]] run_dump_test "jalx-local-n32" [list [list ld $abi_ldflags(n32)]] run_dump_test "bal-jalx-addend-n32" [list [list ld $abi_ldflags(n32)]] run_dump_test "bal-jalx-local-n32" [list [list ld $abi_ldflags(n32)]] run_dump_test "bal-jalx-pic-n32" [list [list ld $abi_ldflags(n32)]] + run_dump_test "bal-jalx-pic-ignore-n32" [list [list ld $abi_ldflags(n32)]] run_dump_test "jalx-addend-n64" [list [list ld $abi_ldflags(n64)]] run_dump_test "jalx-local-n64" [list [list ld $abi_ldflags(n64)]] run_dump_test "bal-jalx-addend-n64" [list [list ld $abi_ldflags(n64)]] run_dump_test "bal-jalx-local-n64" [list [list ld $abi_ldflags(n64)]] run_dump_test "bal-jalx-pic-n64" [list [list ld $abi_ldflags(n64)]] + run_dump_test "bal-jalx-pic-ignore-n64" [list [list ld $abi_ldflags(n64)]] } run_dump_test "unaligned-jalx-0" [list [list ld $abi_ldflags(o32)]] @@ -262,14 +265,22 @@ run_dump_test "unaligned-branch" [list [list ld $abi_ldflags(o32)]] if $has_newabi { run_dump_test "unaligned-branch-2" \ [list [list ld $abi_ldflags(n32)]] + run_dump_test "unaligned-branch-ignore-2" \ + [list [list ld $abi_ldflags(n32)]] run_dump_test "unaligned-branch-r6-1" \ [list [list ld $abi_ldflags(n32)]] + run_dump_test "unaligned-branch-ignore-r6-1" \ + [list [list ld $abi_ldflags(n32)]] run_dump_test "unaligned-branch-r6-2" \ [list [list ld $abi_ldflags(n32)]] run_dump_test "unaligned-branch-mips16" \ [list [list ld $abi_ldflags(n32)]] + run_dump_test "unaligned-branch-ignore-mips16" \ + [list [list ld $abi_ldflags(n32)]] run_dump_test "unaligned-branch-micromips" \ [list [list ld $abi_ldflags(n32)]] + run_dump_test "unaligned-branch-ignore-micromips" \ + [list [list ld $abi_ldflags(n32)]] run_dump_test "unaligned-jump" \ [list [list ld $abi_ldflags(n32)]] run_dump_test "unaligned-jump-mips16" \ diff --git a/ld/testsuite/ld-mips-elf/unaligned-branch-ignore-2.d b/ld/testsuite/ld-mips-elf/unaligned-branch-ignore-2.d new file mode 100644 index 0000000..323c43a --- /dev/null +++ b/ld/testsuite/ld-mips-elf/unaligned-branch-ignore-2.d @@ -0,0 +1,64 @@ +#name: MIPS link branch to unaligned symbol 2 (ignore branch ISA) +#as: -EB -n32 -march=from-abi +#ld: -EB -Ttext 0x1c000000 -e 0x1c000000 --ignore-branch-isa +#source: ../../../gas/testsuite/gas/mips/unaligned-branch-2.s +#error: \A[^\n]*: In function `foo':\n +#error: \(\.text\+0x101c\): Branch to a non-instruction-aligned address\n +#error: [^\n]*: In function `foo':\n +#error: \(\.text\+0x1024\): Branch to a non-instruction-aligned address\n +#error: [^\n]*: In function `foo':\n +#error: \(\.text\+0x102c\): Branch to a non-instruction-aligned address\n +#error: [^\n]*: In function `foo':\n +#error: \(\.text\+0x1034\): Branch to a non-instruction-aligned address\n +#error: [^\n]*: In function `foo':\n +#error: \(\.text\+0x103c\): Branch to a non-instruction-aligned address\n +#error: [^\n]*: In function `foo':\n +#error: \(\.text\+0x1044\): Branch to a non-instruction-aligned address\n +#error: [^\n]*: In function `foo':\n +#error: \(\.text\+0x104c\): Branch to a non-instruction-aligned address\n +#error: [^\n]*: In function `foo':\n +#error: \(\.text\+0x1054\): Branch to a non-instruction-aligned address\n +#error: [^\n]*: In function `foo':\n +#error: \(\.text\+0x105c\): Branch to a non-instruction-aligned address\n +#error: [^\n]*: In function `foo':\n +#error: \(\.text\+0x107c\): Branch to a non-instruction-aligned address\n +#error: [^\n]*: In function `foo':\n +#error: \(\.text\+0x1084\): Branch to a non-instruction-aligned address\n +#error: [^\n]*: In function `foo':\n +#error: \(\.text\+0x108c\): Branch to a non-instruction-aligned address\n +#error: [^\n]*: In function `foo':\n +#error: \(\.text\+0x1094\): Branch to a non-instruction-aligned address\n +#error: [^\n]*: In function `foo':\n +#error: \(\.text\+0x109c\): Branch to a non-instruction-aligned address\n +#error: [^\n]*: In function `foo':\n +#error: \(\.text\+0x10a4\): Branch to a non-instruction-aligned address\n +#error: [^\n]*: In function `foo':\n +#error: \(\.text\+0x10ac\): Branch to a non-instruction-aligned address\n +#error: [^\n]*: In function `foo':\n +#error: \(\.text\+0x10b4\): Branch to a non-instruction-aligned address\n +#error: [^\n]*: In function `foo':\n +#error: \(\.text\+0x10bc\): Branch to a non-instruction-aligned address\n +#error: [^\n]*: In function `foo':\n +#error: \(\.text\+0x10f4\): Cannot convert a branch to JALX for a non-word-aligned address\n +#error: [^\n]*: In function `foo':\n +#error: \(\.text\+0x10fc\): Cannot convert a branch to JALX for a non-word-aligned address\n +#error: [^\n]*: In function `foo':\n +#error: \(\.text\+0x1104\): Cannot convert a branch to JALX for a non-word-aligned address\n +#error: [^\n]*: In function `foo':\n +#error: \(\.text\+0x1124\): Cannot convert a branch to JALX for a non-word-aligned address\n +#error: [^\n]*: In function `foo':\n +#error: \(\.text\+0x112c\): Cannot convert a branch to JALX for a non-word-aligned address\n +#error: [^\n]*: In function `foo':\n +#error: \(\.text\+0x1134\): Cannot convert a branch to JALX for a non-word-aligned address\n +#error: [^\n]*: In function `foo':\n +#error: \(\.text\+0x113c\): Cannot convert a branch to JALX for a non-word-aligned address\n +#error: [^\n]*: In function `foo':\n +#error: \(\.text\+0x1144\): Cannot convert a branch to JALX for a non-word-aligned address\n +#error: [^\n]*: In function `foo':\n +#error: \(\.text\+0x114c\): Cannot convert a branch to JALX for a non-word-aligned address\n +#error: [^\n]*: In function `foo':\n +#error: \(\.text\+0x1154\): Cannot convert a branch to JALX for a non-word-aligned address\n +#error: [^\n]*: In function `foo':\n +#error: \(\.text\+0x115c\): Cannot convert a branch to JALX for a non-word-aligned address\n +#error: [^\n]*: In function `foo':\n +#error: \(\.text\+0x1164\): Cannot convert a branch to JALX for a non-word-aligned address\Z diff --git a/ld/testsuite/ld-mips-elf/unaligned-branch-ignore-micromips.d b/ld/testsuite/ld-mips-elf/unaligned-branch-ignore-micromips.d new file mode 100644 index 0000000..6a62fe5 --- /dev/null +++ b/ld/testsuite/ld-mips-elf/unaligned-branch-ignore-micromips.d @@ -0,0 +1,84 @@ +#name: microMIPS link branch to unaligned symbol (ignore branch ISA) +#as: -EB -n32 -march=from-abi +#ld: -EB -Ttext 0x1c000000 -e 0x1c000000 --ignore-branch-isa +#source: ../../../gas/testsuite/gas/mips/unaligned-branch-micromips-2.s +#error: \A[^\n]*: In function `foo':\n +#error: \(\.text\+0x100a\): Cannot convert a branch to JALX for a non-word-aligned address\n +#error: [^\n]*: In function `foo':\n +#error: \(\.text\+0x1012\): Cannot convert a branch to JALX for a non-word-aligned address\n +#error: [^\n]*: In function `foo':\n +#error: \(\.text\+0x101a\): Cannot convert a branch to JALX for a non-word-aligned address\n +#error: [^\n]*: In function `foo':\n +#error: \(\.text\+0x102a\): Cannot convert a branch to JALX for a non-word-aligned address\n +#error: [^\n]*: In function `foo':\n +#error: \(\.text\+0x1032\): Cannot convert a branch to JALX for a non-word-aligned address\n +#error: [^\n]*: In function `foo':\n +#error: \(\.text\+0x103a\): Cannot convert a branch to JALX for a non-word-aligned address\n +#error: [^\n]*: In function `foo':\n +#error: \(\.text\+0x1062\): Branch to a non-instruction-aligned address\n +#error: [^\n]*: In function `foo':\n +#error: \(\.text\+0x1072\): Branch to a non-instruction-aligned address\n +#error: [^\n]*: In function `foo':\n +#error: \(\.text\+0x1088\): Cannot convert a branch to JALX for a non-word-aligned address\n +#error: [^\n]*: In function `foo':\n +#error: \(\.text\+0x108e\): Cannot convert a branch to JALX for a non-word-aligned address\n +#error: [^\n]*: In function `foo':\n +#error: \(\.text\+0x1094\): Cannot convert a branch to JALX for a non-word-aligned address\n +#error: [^\n]*: In function `foo':\n +#error: \(\.text\+0x10a0\): Cannot convert a branch to JALX for a non-word-aligned address\n +#error: [^\n]*: In function `foo':\n +#error: \(\.text\+0x10a6\): Cannot convert a branch to JALX for a non-word-aligned address\n +#error: [^\n]*: In function `foo':\n +#error: \(\.text\+0x10ac\): Cannot convert a branch to JALX for a non-word-aligned address\n +#error: [^\n]*: In function `foo':\n +#error: \(\.text\+0x10ca\): Branch to a non-instruction-aligned address\n +#error: [^\n]*: In function `foo':\n +#error: \(\.text\+0x10d6\): Branch to a non-instruction-aligned address\n +#error: [^\n]*: In function `foo':\n +#error: \(\.text\+0x10e8\): Cannot convert a branch to JALX for a non-word-aligned address\n +#error: [^\n]*: In function `foo':\n +#error: \(\.text\+0x10ee\): Cannot convert a branch to JALX for a non-word-aligned address\n +#error: [^\n]*: In function `foo':\n +#error: \(\.text\+0x10f4\): Cannot convert a branch to JALX for a non-word-aligned address\n +#error: [^\n]*: In function `foo':\n +#error: \(\.text\+0x1100\): Cannot convert a branch to JALX for a non-word-aligned address\n +#error: [^\n]*: In function `foo':\n +#error: \(\.text\+0x1106\): Cannot convert a branch to JALX for a non-word-aligned address\n +#error: [^\n]*: In function `foo':\n +#error: \(\.text\+0x110c\): Cannot convert a branch to JALX for a non-word-aligned address\n +#error: [^\n]*: In function `foo':\n +#error: \(\.text\+0x112a\): Branch to a non-instruction-aligned address\n +#error: [^\n]*: In function `foo':\n +#error: \(\.text\+0x1136\): Branch to a non-instruction-aligned address\n +#error: [^\n]*: In function `foo':\n +#error: \(\.text\+0x1146\): Cannot convert a branch to JALX for a non-word-aligned address\n +#error: [^\n]*: In function `foo':\n +#error: \(\.text\+0x114a\): Cannot convert a branch to JALX for a non-word-aligned address\n +#error: [^\n]*: In function `foo':\n +#error: \(\.text\+0x114e\): Cannot convert a branch to JALX for a non-word-aligned address\n +#error: [^\n]*: In function `foo':\n +#error: \(\.text\+0x1156\): Cannot convert a branch to JALX for a non-word-aligned address\n +#error: [^\n]*: In function `foo':\n +#error: \(\.text\+0x115a\): Cannot convert a branch to JALX for a non-word-aligned address\n +#error: [^\n]*: In function `foo':\n +#error: \(\.text\+0x115e\): Cannot convert a branch to JALX for a non-word-aligned address\n +#error: [^\n]*: In function `foo':\n +#error: \(\.text\+0x1172\): Branch to a non-instruction-aligned address\n +#error: [^\n]*: In function `foo':\n +#error: \(\.text\+0x117a\): Branch to a non-instruction-aligned address\n +#error: [^\n]*: In function `foo':\n +#error: \(\.text\+0x1186\): Cannot convert a branch to JALX for a non-word-aligned address\n +#error: [^\n]*: In function `foo':\n +#error: \(\.text\+0x118a\): Cannot convert a branch to JALX for a non-word-aligned address\n +#error: [^\n]*: In function `foo':\n +#error: \(\.text\+0x118e\): Cannot convert a branch to JALX for a non-word-aligned address\n +#error: [^\n]*: In function `foo':\n +#error: \(\.text\+0x1196\): Cannot convert a branch to JALX for a non-word-aligned address\n +#error: [^\n]*: In function `foo':\n +#error: \(\.text\+0x119a\): Cannot convert a branch to JALX for a non-word-aligned address\n +#error: [^\n]*: In function `foo':\n +#error: \(\.text\+0x119e\): Cannot convert a branch to JALX for a non-word-aligned address\n +#error: [^\n]*: In function `foo':\n +#error: \(\.text\+0x11b2\): Branch to a non-instruction-aligned address\n +#error: [^\n]*: In function `foo':\n +#error: \(\.text\+0x11ba\): Branch to a non-instruction-aligned address\Z diff --git a/ld/testsuite/ld-mips-elf/unaligned-branch-ignore-mips16.d b/ld/testsuite/ld-mips-elf/unaligned-branch-ignore-mips16.d new file mode 100644 index 0000000..f6ace4a --- /dev/null +++ b/ld/testsuite/ld-mips-elf/unaligned-branch-ignore-mips16.d @@ -0,0 +1,36 @@ +#name: MIPS16 link branch to unaligned symbol (ignore branch ISA) +#as: -EB -n32 -march=from-abi +#ld: -EB -Ttext 0x1c000000 -e 0x1c000000 --ignore-branch-isa +#source: ../../../gas/testsuite/gas/mips/unaligned-branch-mips16-2.s +#error: [^\n]*: In function `foo':\n +#error: \(\.text\+0x1008\): Cannot convert a branch to JALX for a non-word-aligned address\n +#error: [^\n]*: In function `foo':\n +#error: \(\.text\+0x100e\): Cannot convert a branch to JALX for a non-word-aligned address\n +#error: [^\n]*: In function `foo':\n +#error: \(\.text\+0x1014\): Cannot convert a branch to JALX for a non-word-aligned address\n +#error: [^\n]*: In function `foo':\n +#error: \(\.text\+0x1020\): Cannot convert a branch to JALX for a non-word-aligned address\n +#error: [^\n]*: In function `foo':\n +#error: \(\.text\+0x1026\): Cannot convert a branch to JALX for a non-word-aligned address\n +#error: [^\n]*: In function `foo':\n +#error: \(\.text\+0x102c\): Cannot convert a branch to JALX for a non-word-aligned address\n +#error: [^\n]*: In function `foo':\n +#error: \(\.text\+0x104a\): Branch to a non-instruction-aligned address\n +#error: [^\n]*: In function `foo':\n +#error: \(\.text\+0x1056\): Branch to a non-instruction-aligned address\n +#error: [^\n]*: In function `foo':\n +#error: \(\.text\+0x1068\): Cannot convert a branch to JALX for a non-word-aligned address\n +#error: [^\n]*: In function `foo':\n +#error: \(\.text\+0x106e\): Cannot convert a branch to JALX for a non-word-aligned address\n +#error: [^\n]*: In function `foo':\n +#error: \(\.text\+0x1074\): Cannot convert a branch to JALX for a non-word-aligned address\n +#error: [^\n]*: In function `foo':\n +#error: \(\.text\+0x1080\): Cannot convert a branch to JALX for a non-word-aligned address\n +#error: [^\n]*: In function `foo':\n +#error: \(\.text\+0x1086\): Cannot convert a branch to JALX for a non-word-aligned address\n +#error: [^\n]*: In function `foo':\n +#error: \(\.text\+0x108c\): Cannot convert a branch to JALX for a non-word-aligned address\n +#error: [^\n]*: In function `foo':\n +#error: \(\.text\+0x10aa\): Branch to a non-instruction-aligned address\n +#error: [^\n]*: In function `foo':\n +#error: \(\.text\+0x10b6\): Branch to a non-instruction-aligned address\Z diff --git a/ld/testsuite/ld-mips-elf/unaligned-branch-ignore-r6-1.d b/ld/testsuite/ld-mips-elf/unaligned-branch-ignore-r6-1.d new file mode 100644 index 0000000..b7a11bd --- /dev/null +++ b/ld/testsuite/ld-mips-elf/unaligned-branch-ignore-r6-1.d @@ -0,0 +1,72 @@ +#name: MIPSr6 link branch to unaligned symbol 1 (ignore branch ISA) +#as: -EB -n32 -march=from-abi +#ld: -EB -Ttext 0x1c000000 -e 0x1c000000 --ignore-branch-isa +#source: ../../../gas/testsuite/gas/mips/unaligned-branch-r6-3.s +#error: \A[^\n]*: In function `foo':\n +#error: \(\.text\+0x101c\): Branch to a non-instruction-aligned address\n +#error: [^\n]*: In function `foo':\n +#error: \(\.text\+0x1024\): Branch to a non-instruction-aligned address\n +#error: [^\n]*: In function `foo':\n +#error: \(\.text\+0x102c\): Branch to a non-instruction-aligned address\n +#error: [^\n]*: In function `foo':\n +#error: \(\.text\+0x1034\): Branch to a non-instruction-aligned address\n +#error: [^\n]*: In function `foo':\n +#error: \(\.text\+0x103c\): Branch to a non-instruction-aligned address\n +#error: [^\n]*: In function `foo':\n +#error: \(\.text\+0x1044\): Branch to a non-instruction-aligned address\n +#error: [^\n]*: In function `foo':\n +#error: \(\.text\+0x104c\): Branch to a non-instruction-aligned address\n +#error: [^\n]*: In function `foo':\n +#error: \(\.text\+0x1054\): Branch to a non-instruction-aligned address\n +#error: [^\n]*: In function `foo':\n +#error: \(\.text\+0x105c\): Branch to a non-instruction-aligned address\n +#error: [^\n]*: In function `foo':\n +#error: \(\.text\+0x107c\): Branch to a non-instruction-aligned address\n +#error: [^\n]*: In function `foo':\n +#error: \(\.text\+0x1084\): Branch to a non-instruction-aligned address\n +#error: [^\n]*: In function `foo':\n +#error: \(\.text\+0x108c\): Branch to a non-instruction-aligned address\n +#error: [^\n]*: In function `foo':\n +#error: \(\.text\+0x1094\): Branch to a non-instruction-aligned address\n +#error: [^\n]*: In function `foo':\n +#error: \(\.text\+0x109c\): Branch to a non-instruction-aligned address\n +#error: [^\n]*: In function `foo':\n +#error: \(\.text\+0x10a4\): Branch to a non-instruction-aligned address\n +#error: [^\n]*: In function `foo':\n +#error: \(\.text\+0x10ac\): Branch to a non-instruction-aligned address\n +#error: [^\n]*: In function `foo':\n +#error: \(\.text\+0x10b4\): Branch to a non-instruction-aligned address\n +#error: [^\n]*: In function `foo':\n +#error: \(\.text\+0x10bc\): Branch to a non-instruction-aligned address\n +#error: [^\n]*: In function `foo':\n +#error: \(\.text\+0x10dc\): Cannot convert a branch to JALX for a non-word-aligned address\n +#error: [^\n]*: In function `foo':\n +#error: \(\.text\+0x10e4\): Cannot convert a branch to JALX for a non-word-aligned address\n +#error: [^\n]*: In function `foo':\n +#error: \(\.text\+0x10f4\): Cannot convert a branch to JALX for a non-word-aligned address\n +#error: [^\n]*: In function `foo':\n +#error: \(\.text\+0x10fc\): Cannot convert a branch to JALX for a non-word-aligned address\n +#error: [^\n]*: In function `foo':\n +#error: \(\.text\+0x1104\): Cannot convert a branch to JALX for a non-word-aligned address\n +#error: [^\n]*: In function `foo':\n +#error: \(\.text\+0x110c\): Cannot convert a branch to JALX for a non-word-aligned address\n +#error: [^\n]*: In function `foo':\n +#error: \(\.text\+0x1114\): Cannot convert a branch to JALX for a non-word-aligned address\n +#error: [^\n]*: In function `foo':\n +#error: \(\.text\+0x1124\): Cannot convert a branch to JALX for a non-word-aligned address\n +#error: [^\n]*: In function `foo':\n +#error: \(\.text\+0x112c\): Cannot convert a branch to JALX for a non-word-aligned address\n +#error: [^\n]*: In function `foo':\n +#error: \(\.text\+0x1134\): Cannot convert a branch to JALX for a non-word-aligned address\n +#error: [^\n]*: In function `foo':\n +#error: \(\.text\+0x113c\): Cannot convert a branch to JALX for a non-word-aligned address\n +#error: [^\n]*: In function `foo':\n +#error: \(\.text\+0x1144\): Cannot convert a branch to JALX for a non-word-aligned address\n +#error: [^\n]*: In function `foo':\n +#error: \(\.text\+0x114c\): Cannot convert a branch to JALX for a non-word-aligned address\n +#error: [^\n]*: In function `foo':\n +#error: \(\.text\+0x1164\): Cannot convert a branch to JALX for a non-word-aligned address\n +#error: [^\n]*: In function `foo':\n +#error: \(\.text\+0x116c\): Cannot convert a branch to JALX for a non-word-aligned address\n +#error: [^\n]*: In function `foo':\n +#error: \(\.text\+0x1174\): Cannot convert a branch to JALX for a non-word-aligned address\Z |