aboutsummaryrefslogtreecommitdiff
diff options
context:
space:
mode:
Diffstat
-rw-r--r--bfd/ChangeLog6
-rw-r--r--bfd/elf32-m32r.c96
2 files changed, 59 insertions, 43 deletions
diff --git a/bfd/ChangeLog b/bfd/ChangeLog
index 6e482bd..58647be 100644
--- a/bfd/ChangeLog
+++ b/bfd/ChangeLog
@@ -1,3 +1,9 @@
+Mon Jun 1 11:12:02 1998 Nick Clifton <nickc@cygnus.com>
+
+ * elf32-m32r.c (m32r_elf_print_private_bfd_data): Also call
+ _bfd_elf_print_private_bfd_data() so that the program header will
+ be displayed.
+
Mon Jun 1 12:14:28 1998 Ian Lance Taylor <ian@cygnus.com>
* peicode.h (coff_swap_sym_in): Check for C_SECTION rather than
diff --git a/bfd/elf32-m32r.c b/bfd/elf32-m32r.c
index 39decd2..4e043ab 100644
--- a/bfd/elf32-m32r.c
+++ b/bfd/elf32-m32r.c
@@ -1,5 +1,5 @@
/* M32R-specific support for 32-bit ELF.
- Copyright (C) 1996, 1997 Free Software Foundation, Inc.
+ Copyright (C) 1996, 1997, 1998 Free Software Foundation, Inc.
This file is part of BFD, the Binary File Descriptor library.
@@ -56,6 +56,9 @@ static boolean m32r_elf_relax_delete_bytes
PARAMS ((bfd *, asection *, bfd_vma, int));
#endif
+#define NOP_INSN 0x7000
+#define MAKE_PARALLEL(insn) ((insn) | 0x8000)
+
/* Use REL instead of RELA to save space.
This only saves space in libraries and object files, but perhaps
relocs will be put in ROM? All in all though, REL relocs are a pain
@@ -246,13 +249,13 @@ static reloc_howto_type m32r_elf_howto_table[] =
static bfd_reloc_status_type
m32r_elf_10_pcrel_reloc (abfd, reloc_entry, symbol, data,
input_section, output_bfd, error_message)
- bfd *abfd;
- arelent *reloc_entry;
- asymbol *symbol;
+ bfd * abfd;
+ arelent * reloc_entry;
+ asymbol * symbol;
PTR data;
- asection *input_section;
- bfd *output_bfd;
- char **error_message;
+ asection * input_section;
+ bfd * output_bfd;
+ char ** error_message;
{
/* This part is from bfd_elf_generic_reloc. */
if (output_bfd != (bfd *) NULL
@@ -517,10 +520,6 @@ m32r_elf_sda16_reloc (abfd, reloc_entry, symbol, data,
bfd *output_bfd;
char **error_message;
{
- bfd_vma sda_base;
- unsigned long x;
- reloc_howto_type *howto;
-
/* This part is from bfd_elf_generic_reloc. */
if (output_bfd != (bfd *) NULL
&& (symbol->flags & BSF_SECTION_SYM) == 0
@@ -758,7 +757,7 @@ m32r_elf_final_sda_base (output_bfd, info, error_message, psb)
/* Only get the error once. */
*psb = elf_gp (output_bfd) = 4;
*error_message =
- (const char *) "SDA relocation when _SDA_BASE_ not defined";
+ (const char *) _("SDA relocation when _SDA_BASE_ not defined");
return bfd_reloc_dangerous;
}
}
@@ -815,7 +814,6 @@ m32r_elf_relocate_section (output_bfd, info, input_bfd, input_section,
Elf_Internal_Shdr *symtab_hdr = &elf_tdata (input_bfd)->symtab_hdr;
struct elf_link_hash_entry **sym_hashes = elf_sym_hashes (input_bfd);
Elf_Internal_Rela *rel, *relend;
- bfd *dynobj = elf_hash_table (info)->dynobj;
/* Assume success. */
boolean ret = true;
@@ -839,10 +837,11 @@ m32r_elf_relocate_section (output_bfd, info, input_bfd, input_section,
bfd_reloc_status_type r;
const char *errmsg = NULL;
+ h = NULL;
r_type = ELF32_R_TYPE (rel->r_info);
if (r_type < 0 || r_type >= (int) R_M32R_max)
{
- (*_bfd_error_handler) ("%s: unknown relocation type %d",
+ (*_bfd_error_handler) (_("%s: unknown relocation type %d"),
bfd_get_filename (input_bfd),
(int) r_type);
bfd_set_error (bfd_error_bad_value);
@@ -928,7 +927,6 @@ m32r_elf_relocate_section (output_bfd, info, input_bfd, input_section,
bfd_vma relocation;
/* This is a final link. */
- h = NULL;
sym = NULL;
sec = NULL;
@@ -1047,7 +1045,7 @@ m32r_elf_relocate_section (output_bfd, info, input_bfd, input_section,
}
else
{
- (*_bfd_error_handler) ("%s: The target (%s) of an %s relocation is in the wrong section (%s)",
+ (*_bfd_error_handler) (_("%s: The target (%s) of an %s relocation is in the wrong section (%s)"),
bfd_get_filename (input_bfd),
sym_name,
m32r_elf_howto_table[(int) r_type].name,
@@ -1104,19 +1102,19 @@ m32r_elf_relocate_section (output_bfd, info, input_bfd, input_section,
break;
case bfd_reloc_outofrange:
- errmsg = "internal error: out of range error";
+ errmsg = _("internal error: out of range error");
goto common_error;
case bfd_reloc_notsupported:
- errmsg = "internal error: unsupported relocation error";
+ errmsg = _("internal error: unsupported relocation error");
goto common_error;
case bfd_reloc_dangerous:
- errmsg = "internal error: dangerous error";
+ errmsg = _("internal error: dangerous error");
goto common_error;
default:
- errmsg = "internal error: unknown error";
+ errmsg = _("internal error: unknown error");
/* fall through */
common_error:
@@ -1373,7 +1371,7 @@ m32r_elf_relax_section (abfd, sec, link_info, again)
/* See if there's a nop following the jl.
Also see if we can use a bl8 insn. */
code = bfd_get_16 (abfd, contents + irel->r_offset + 10);
- nop_p = (code & 0x7fff) == 7000;
+ nop_p = (code & 0x7fff) == NOP_INSN;
bl8_p = pcrel_value >= -0x200 && pcrel_value < 0x200;
if (bl8_p)
@@ -1383,9 +1381,9 @@ m32r_elf_relax_section (abfd, sec, link_info, again)
CODE currently must be a nop, but for cleanness we
allow it to be anything). */
#ifndef USE_REL /* put in for learning purposes */
- code = 0x7e000000 | code;
+ code = 0x7e000000 | MAKE_PARALLEL (code);
#else
- code = (0x7e000000 + (((addend >> 2) & 0xff) << 16)) | code;
+ code = (0x7e000000 + (((addend >> 2) & 0xff) << 16)) | MAKE_PARALLEL (code);
#endif
to_delete = 8;
}
@@ -1451,7 +1449,7 @@ m32r_elf_relax_section (abfd, sec, link_info, again)
We don't need to do this in the case of relaxing to ld24,
and the above code sets nop_p so this isn't done. */
if (! nop_p && to_delete == 4)
- bfd_put_16 (abfd, 0x7000, contents + irel->r_offset + 4);
+ bfd_put_16 (abfd, NOP_INSN, contents + irel->r_offset + 4);
/* That will change things, so we should relax again.
Note that this is not required, and it may be slow. */
@@ -1743,8 +1741,11 @@ m32r_elf_object_p (abfd)
{
default:
case E_M32R_ARCH: (void) bfd_default_set_arch_mach (abfd, bfd_arch_m32r, bfd_mach_m32r); break;
+/* start-sanitize-m32rx */
case E_M32RX_ARCH: (void) bfd_default_set_arch_mach (abfd, bfd_arch_m32r, bfd_mach_m32rx); break;
+/* end-sanitize-m32rx */
}
+ return true;
}
/* Store the machine number in the flags field. */
@@ -1759,7 +1760,9 @@ m32r_elf_final_write_processing (abfd, linker)
{
default:
case bfd_mach_m32r: val = E_M32R_ARCH; break;
+/* start-sanitize-m32rx */
case bfd_mach_m32rx: val = E_M32RX_ARCH; break;
+/* end-sanitize-m32rx */
}
elf_elfheader (abfd)->e_flags &=~ EF_M32R_ARCH;
@@ -1807,20 +1810,29 @@ m32r_elf_merge_private_bfd_data (ibfd, obfd)
bfd * ibfd;
bfd * obfd;
{
- flagword old_flags;
- flagword new_flags;
+ flagword out_flags;
+ flagword in_flags;
if ( bfd_get_flavour (ibfd) != bfd_target_elf_flavour
|| bfd_get_flavour (obfd) != bfd_target_elf_flavour)
return true;
- new_flags = elf_elfheader (ibfd)->e_flags;
- old_flags = elf_elfheader (obfd)->e_flags;
+ in_flags = elf_elfheader (ibfd)->e_flags;
+ out_flags = elf_elfheader (obfd)->e_flags;
if (! elf_flags_init (obfd))
{
+ /* If the input is the default architecture then do not
+ bother setting the flags for the output architecture,
+ instead allow future merges to do this. If no future
+ merges ever set these flags then they will retain their
+ unitialised values, which surprise surprise, correspond
+ to the default values. */
+ if (bfd_get_arch_info (ibfd)->the_default)
+ return true;
+
elf_flags_init (obfd) = true;
- elf_elfheader (obfd)->e_flags = new_flags;
+ elf_elfheader (obfd)->e_flags = in_flags;
if (bfd_get_arch (obfd) == bfd_get_arch (ibfd)
&& bfd_get_arch_info (obfd)->the_default)
@@ -1832,24 +1844,18 @@ m32r_elf_merge_private_bfd_data (ibfd, obfd)
}
/* Check flag compatibility. */
- if (new_flags == old_flags)
+ if (in_flags == out_flags)
return true;
- if ((new_flags & EF_M32R_ARCH) != (old_flags & EF_M32R_ARCH))
+ if ((in_flags & EF_M32R_ARCH) != (out_flags & EF_M32R_ARCH))
{
- if ((new_flags & EF_M32R_ARCH) == E_M32RX_ARCH)
+ if ((in_flags & EF_M32R_ARCH) != E_M32R_ARCH)
{
- _bfd_error_handler ("%s: Instruction set mismatch with previous modules",
+ _bfd_error_handler (_("%s: Instruction set mismatch with previous modules"),
bfd_get_filename (ibfd));
-#if 1
+
bfd_set_error (bfd_error_bad_value);
return false;
-#endif
- }
- else
- {
- _bfd_error_handler ("%s: Merging M32R instructions with M32RX instructions",
- bfd_get_filename (ibfd));
}
}
@@ -1866,13 +1872,17 @@ m32r_elf_print_private_bfd_data (abfd, ptr)
BFD_ASSERT (abfd != NULL && ptr != NULL)
- fprintf (file, "private flags = %x", elf_elfheader (abfd)->e_flags);
+ _bfd_elf_print_private_bfd_data (abfd, ptr);
+
+ fprintf (file, _("private flags = %lx"), elf_elfheader (abfd)->e_flags);
switch (elf_elfheader (abfd)->e_flags & EF_M32R_ARCH)
{
default:
- case E_M32R_ARCH: fprintf (file, ": m32r instructions"); break;
- case E_M32RX_ARCH: fprintf (file, ": m32rx instructions"); break;
+ case E_M32R_ARCH: fprintf (file, _(": m32r instructions")); break;
+/* start-sanitize-m32rx */
+ case E_M32RX_ARCH: fprintf (file, _(": m32rx instructions")); break;
+/* end-sanitize-m32rx */
}
fputc ('\n', file);
generated by cgit v1.1 at 2024-12-30 12:26:57 +0000