diff options
| -rw-r--r-- | binutils/.Sanitize | 3 | ||||
| -rw-r--r-- | binutils/ChangeLog | 14 | ||||
| -rw-r--r-- | binutils/Makefile.am | 433 | ||||
| -rw-r--r-- | binutils/Makefile.in | 1279 | ||||
| -rw-r--r-- | binutils/acconfig.h | 6 | ||||
| -rw-r--r-- | binutils/acinclude.m4 | 1 | ||||
| -rw-r--r-- | binutils/aclocal.m4 | 295 | ||||
| -rw-r--r-- | binutils/config.in | 61 | ||||
| -rwxr-xr-x | binutils/configure | 1199 | ||||
| -rw-r--r-- | binutils/configure.in | 92 | ||||
| -rw-r--r-- | binutils/stamp-h.in | 1 |
11 files changed, 2604 insertions, 780 deletions
diff --git a/binutils/.Sanitize b/binutils/.Sanitize index c66a8ff..fef08a1 100644 --- a/binutils/.Sanitize +++ b/binutils/.Sanitize @@ -24,10 +24,12 @@ Do-first: Things-to-keep: ChangeLog +Makefile.am Makefile.in NEWS README acconfig.h +acinclude.m4 aclocal.m4 addr2line.1 addr2line.c @@ -94,6 +96,7 @@ size.1 size.c srconv.c stabs.c +stamp-h.in strings.1 strings.c strip.1 diff --git a/binutils/ChangeLog b/binutils/ChangeLog index 2d28676..f616ed4 100644 --- a/binutils/ChangeLog +++ b/binutils/ChangeLog @@ -1,5 +1,19 @@ Thu Jul 31 11:51:35 1997 Ian Lance Taylor <ian@cygnus.com> + * Makefile.am: New file, based on old Makefile.in. + * acinclude.m4: New file, from old aclocal.m4. + * configure.in: Call AM_INIT_AUTOMAKE and AM_PROG_LIBTOOL. Remove + shared library handling; now handled by libtool. Replace + AC_CONFIG_HEADER with AM_CONFIG_HEADER. Call AC_PROG_YACC, + AC_PROG_LEX, AC_DECL_YYTEST, AM_MAINTAINER_MODE, AM_CYGWIN32, and + AM_EXEEXT. Replace AC_PROG_INSTALL with AM_PROG_INSTALL. Remove + stamp-h handling in AC_OUTPUT. + * acconfig.h: Mention PACKAGE and VERSION. + * stamp-h.in: New file. + * Makefile.in: Now built with automake. + * aclocal.m4: Now built with aclocal. + * config.in, configure: Rebuild. + From Ton van Overbeek <tvoverbe@wk.estec.esa.nl>: * rcparse.y (dialog): Default menu and class to be named. (styles): If FONT is seen, set DS_SETFONT in dialog style. diff --git a/binutils/Makefile.am b/binutils/Makefile.am new file mode 100644 index 0000000..6f3809c --- /dev/null +++ b/binutils/Makefile.am @@ -0,0 +1,433 @@ +## Process this file with automake to generate Makefile.in + +AUTOMAKE_OPTIONS = dejagnu + +tooldir = $(exec_prefix)/$(target_alias) + +CC_FOR_BUILD = @CC_FOR_BUILD@ + +YACC = `if [ -f ../bison/bison ] ; then echo ../bison/bison -y -L../bison/bison ; else echo bison -y ; fi` +YFLAGS = -d +LEX = `if [ -f ../flex/flex ] ; then echo ../flex/flex ; else echo flex ; fi` + +# these two are almost the same program +AR_PROG=ar +RANLIB_PROG=ranlib + +# objcopy and strip should be the same program +OBJCOPY_PROG=objcopy +STRIP_PROG=strip.new + +STRINGS_PROG=strings + +# These should all be the same program too. +SIZE_PROG=size +NM_PROG=nm.new +OBJDUMP_PROG=objdump + +# This is the demangler, as a standalone program. +# Note: This one is used as the installed name too, unlike the above. +DEMANGLER_PROG=c++filt + +ADDR2LINE_PROG=addr2line + +NLMCONV_PROG=nlmconv +DLLTOOL_PROG=dlltool +WINDRES_PROG=windres + +SRCONV_PROG=srconv sysdump coffdump + +man_MANS = ar.1 nm.1 objdump.1 ranlib.1 size.1 strings.1 strip.1 objcopy.1 \ + addr2line.1 nlmconv.1 $(DEMANGLER_PROG).1 + +PROGS = $(SIZE_PROG) $(OBJDUMP_PROG) $(NM_PROG) $(AR_PROG) $(STRINGS_PROG) $(STRIP_PROG) $(RANLIB_PROG) $(DEMANGLER_PROG) $(OBJCOPY_PROG) $(ADDR2LINE_PROG) @BUILD_NLMCONV@ @BUILD_SRCONV@ @BUILD_DLLTOOL@ @BUILD_WINDRES@ + +bin_PROGRAMS = $(SIZE_PROG) $(OBJDUMP_PROG) $(AR_PROG) $(STRINGS_PROG) \ + $(RANLIB_PROG) $(DEMANGLER_PROG) $(OBJCOPY_PROG) $(ADDR2LINE_PROG) \ + @BUILD_NLMCONV@ @BUILD_SRCONV@ @BUILD_DLLTOOL@ @BUILD_WINDRES@ + +## We need a special rule to install the programs which are built with .new +noinst_PROGRAMS = $(NM_PROG) $(STRIP_PROG) + +EXTRA_PROGRAMS = $(NLMCONV_PROG) $(SRCONV_PROG) $(DLLTOOL_PROG) $(WINDRES_PROG) + +# Stuff that goes in tooldir/ if appropriate +TOOL_PROGS = nm.new strip.new ar ranlib $(DLLTOOL_PROG) + +BASEDIR = $(srcdir)/.. +BFDDIR = $(BASEDIR)/bfd +INCDIR = $(BASEDIR)/include + +DEP = mkdep + +INCLUDES = -D_GNU_SOURCE -I. -I$(srcdir) -I../bfd -I$(BFDDIR) -I$(INCDIR) @HDEFINES@ + +HFILES = arsup.h bucomm.h budbg.h coffgrok.h debug.h nlmconv.h dlltool.h \ + windres.h + +GENERATED_HFILES = arparse.h sysroff.h sysinfo.h defparse.h + +CFILES = addr2line.c ar.c arsup.c bucomm.c coffdump.c coffgrok.c debug.c \ + dlltool.c filemode.c ieee.c is-ranlib.c is-strip.c maybe-ranlib.c \ + maybe-strip.c nlmconv.c nm.c not-ranlib.c not-strip.c \ + objcopy.c objdump.c prdbg.c rdcoff.c rddbg.c size.c srconv.c \ + stabs.c strings.c sysdump.c version.c wrstabs.c \ + windres.c resrc.c rescoff.c resbin.c + +GENERATED_CFILES = \ + underscore.c arparse.c arlex.c sysroff.c sysinfo.c syslex.c \ + defparse.c deflex.c nlmheader.c rcparse.c rclex.c + +DEBUG_SRCS = rddbg.c debug.c stabs.c ieee.c rdcoff.c +WRITE_DEBUG_SRCS = $(DEBUG_SRCS) wrstabs.c + +# Code shared by all the binutils. +BULIBS = bucomm.c version.c filemode.c + +BFDLIB = ../bfd/libbfd.la + +OPCODES = ../opcodes/libopcodes.la + +LIBIBERTY = ../libiberty/libiberty.a + +EXPECT = `if [ -f $$r/../expect/expect ] ; then \ + echo $$r/../expect/expect ; \ + else echo expect ; fi` +RUNTEST = `if [ -f ${srcdir}/../dejagnu/runtest ] ; then \ + echo ${srcdir}/../dejagnu/runtest ; \ + else echo runtest ; fi` + +CC_FOR_TARGET = ` \ + if [ -f $$r/../gcc/xgcc ] ; then \ + if [ -f $$r/../newlib/Makefile ] ; then \ + echo $$r/../gcc/xgcc -B$$r/../gcc/ -idirafter $$r/../newlib/targ-include -idirafter $${srcroot}/../newlib/libc/include -nostdinc; \ + else \ + echo $$r/../gcc/xgcc -B$$r/../gcc/; \ + fi; \ + else \ + if [ "@host@" = "@target@" ] ; then \ + echo $(CC); \ + else \ + echo gcc | sed '$(program_transform_name)'; \ + fi; \ + fi` + +check-DEJAGNU: site.exp + srcdir=`cd $(srcdir) && pwd`; export srcdir; \ + EXPECT=$(EXPECT); export EXPECT; \ + if [ -f $(top_builddir)/../expect/expect ]; then \ + TCL_LIBRARY=`cd $(top_srcdir)/../tcl/library && pwd`; \ + export TCL_LIBRARY; \ + fi; \ + runtest=$(RUNTEST); \ + if $(SHELL) -c "$$runtest --version" > /dev/null 2>&1; then \ + $$runtest --tool $(DEJATOOL) --srcdir $${srcdir}/testsuite \ + CC_FOR_TARGET="$(CC_FOR_TARGET)" \ + CFLAGS_FOR_TARGET="$(CFLAGS)" $(RUNTESTFLAGS); \ + else echo "WARNING: could not find \`runtest'" 1>&2; :;\ + fi + +installcheck: + /bin/sh $(srcdir)/sanity.sh $(bindir) + +info_TEXINFOS = binutils.texi + +LDADD = $(BFDLIB) $(LIBIBERTY) + +size_SOURCES = size.c $(BULIBS) + +objcopy_SOURCES = objcopy.c not-strip.c $(WRITE_DEBUG_SRCS) $(BULIBS) + +strings_SOURCES = strings.c $(BULIBS) + +strip_new_SOURCES = objcopy.c is-strip.c $(WRITE_DEBUG_SRCS) $(BULIBS) + +nm_new_SOURCES = nm.c $(BULIBS) + +objdump_SOURCES = objdump.c prdbg.c $(DEBUG_SRCS) $(BULIBS) +objdump_LDADD = $(OPCODES) $(BFDLIB) $(LIBIBERTY) + +underscore.c: stamp-under ; @true + +stamp-under: Makefile + echo '/*WARNING: This file is automatically generated!*/' >underscore.t + echo "int prepends_underscore = @UNDERSCORE@;" >>underscore.t + $(SHELL) $(srcdir)/../move-if-change underscore.t underscore.c + touch stamp-under + +version.o: version.c Makefile + $(COMPILE) -c -DVERSION='"$(VERSION)"' $(srcdir)/version.c + +bucomm.o: bucomm.c Makefile + $(COMPILE) -c -DTARGET='"@target@"' $(srcdir)/bucomm.c + +cplus-dem.o: $(BASEDIR)/libiberty/cplus-dem.c $(INCDIR)/getopt.h + $(COMPILE) -c -DMAIN -DVERSION='"$(VERSION)"' $(BASEDIR)/libiberty/cplus-dem.c + +c__filt_SOURCES = +c__filt_LDADD = cplus-dem.o underscore.o $(LIBIBERTY) + +ar_SOURCES = arparse.y arlex.l ar.c not-ranlib.c arsup.c $(BULIBS) +ar_LDADD = $(BFDLIB) $(LIBIBERTY) @LEXLIB@ + +ranlib_SOURCES = ar.c is-ranlib.c arparse.y arlex.l arsup.c $(BULIBS) +ranlib_LDADD = $(BFDLIB) $(LIBIBERTY) @LEXLIB@ + +addr2line_SOURCES = addr2line.c $(BULIBS) + +# The following is commented out for the convertion to automake. +# This rule creates a single binary that switches between ar and ranlib +# by looking at argv[0]. Use this kludge to save some disk space. +# However, you have to install things by hand. +# (That is after 'make install', replace the installed ranlib by a link to ar.) +# Alternatively, you can install ranlib.sh as ranlib. +# ar_with_ranlib: $(ADDL_DEPS) ar.o maybe-ranlib.o +# $(HLDENV) $(CC) $(HLDFLAGS) $(CFLAGS) $(LDFLAGS) -o $(AR_PROG) ar.o maybe-ranlib.o $(ADDL_LIBS) $(EXTRALIBS) +# -rm -f $(RANLIB_PROG) +# -ln $(AR_PROG) $(RANLIB_PROG) +# +# objcopy and strip in one binary that uses argv[0] to decide its action. +# +#objcopy_with_strip: $(ADDL_DEPS) objcopy.o maybe-strip.o +# $(HLDENV) $(CC) $(HLDFLAGS) $(CFLAGS) $(LDFLAGS) -o $(OBJCOPY_PROG) objcopy.o maybe-strip.o $(ADDL_LIBS) $(EXTRALIBS) +# -rm -f $(STRIP_PROG) +# -ln $(OBJCOPY_PROG) $(STRIP_PROG) + +sysroff.c: sysinfo sysroff.info + ./sysinfo -c <$(srcdir)/sysroff.info >sysroff.c + ./sysinfo -i <$(srcdir)/sysroff.info >>sysroff.c + ./sysinfo -g <$(srcdir)/sysroff.info >>sysroff.c + +sysroff.h: sysinfo sysroff.info + ./sysinfo -d <$(srcdir)/sysroff.info >sysroff.h + +sysinfo: sysinfo.o syslex.o + $(CC_FOR_BUILD) $(CFLAGS) $(LDFLAGS) -o $@ sysinfo.o syslex.o + +syslex.o: syslex.c sysinfo.h + if [ -r syslex.c ]; then \ + $(CC_FOR_BUILD) -c -I. $(CFLAGS) syslex.c ; \ + else \ + $(CC_FOR_BUILD) -c -I. -I$(srcdir) $(CFLAGS) $(srcdir)/syslex.c ;\ + fi + +sysinfo.o: sysinfo.c + if [ -r sysinfo.c ]; then \ + $(CC_FOR_BUILD) -c -I. $(CFLAGS) sysinfo.c ; \ + else \ + $(CC_FOR_BUILD) -c -I. $(CFLAGS) $(srcdir)/sysinfo.c ; \ + fi + +srconv_SOURCES = srconv.c coffgrok.c $(BULIBS) + +dlltool_SOURCES = dlltool.c defparse.y deflex.l $(BULIBS) +dlltool_LDADD = $(BFDLIB) $(LIBIBERTY) @LEXLIB@ + +dlltool.o:dlltool.c + $(COMPILE) -c $(DLLTOOL_DEFS) $(srcdir)/dlltool.c + +coffdump_SOURCES = coffdump.c coffgrok.c $(BULIBS) + +sysdump_SOURCES = sysdump.c $(BULIBS) + +# coff/sym.h and coff/ecoff.h won't be found by the automatic dependency +# scripts, since they are only included conditionally. +nlmconv.o: nlmconv.c $(INCDIR)/coff/sym.h $(INCDIR)/coff/ecoff.h + ldname=`echo ld | sed '$(program_transform_name)'`; \ + $(COMPILE) -c -DLD_NAME="\"$${ldname}\"" @NLMCONV_DEFS@ $(srcdir)/nlmconv.c + +nlmconv_SOURCES = nlmconv.c nlmheader.y $(BULIBS) + +windres_SOURCES = windres.c resrc.c rescoff.c resbin.c rcparse.y rclex.l +windres_LDADD = $(BFDLIB) $(LIBIBERTY) @LEXLIB@ + +# Targets to rebuild dependencies in this Makefile. +# Have to get rid of .dep1 here so that "$?" later includes all of $(CFILES). +.dep: dep.sed $(CFILES) $(HFILES) $(GENERATED_CFILES) $(GENERATED_HFILES) config.h + rm -f .dep1 + $(MAKE) DEP=$(DEP) .dep1 + sed -f dep.sed <.dep1 >.dep + +# This rule really wants a mkdep that runs "gcc -MM". +.dep1: $(CFILES) $(GENERATED_CFILES) + rm -f .dep2 + echo '# DO NOT DELETE THIS LINE -- mkdep uses it.' > .dep2 + $(DEP) -f .dep2 $(ALL_CFLAGS) $? + $(SHELL) $(srcdir)/../move-if-change .dep2 .dep1 + +dep.sed: dep-in.sed config.status + sed <$(srcdir)/dep-in.sed >dep.sed \ + -e 's!@INCDIR@!$(INCDIR)!' \ + -e 's!@BFDDIR@!$(BFDDIR)!' \ + -e 's!@SRCDIR@!$(srcdir)!' + +dep: .dep + sed -e '/^..DO NOT DELETE THIS LINE/,$$d' < Makefile > tmp-Makefile + cat .dep >> tmp-Makefile + $(SHELL) $(srcdir)/../move-if-change tmp-Makefile Makefile + +dep-in: .dep + sed -e '/^..DO NOT DELETE THIS LINE/,$$d' < $(srcdir)/Makefile.in > tmp-Makefile.in + cat .dep >> tmp-Makefile.in + $(SHELL) $(srcdir)/../move-if-change tmp-Makefile.in $(srcdir)/Makefile.in + +dep-am: .dep + sed -e '/^..DO NOT DELETE THIS LINE/,$$d' < $(srcdir)/Makefile.am > tmp-Makefile.am + cat .dep >> tmp-Makefile.am + $(SHELL) $(srcdir)/../move-if-change tmp-Makefile.am $(srcdir)/Makefile.am + +.PHONY: dep dep-in dep-am + +### +# DOCUMENTATION TARGETS +config.texi: Makefile + rm -f config.texi + echo '@set VERSION $(VERSION)' > config.texi + +binutils.dvi: $(srcdir)/binutils.texi config.texi + +binutils.info: $(srcdir)/binutils.texi config.texi + +$(DEMANGLER_PROG).1: cxxfilt.man Makefile + sed -e 's/@PROGRAM@/$(DEMANGLER_PROG)/' < $(srcdir)/cxxfilt.man \ + > $(DEMANGLER_PROG).1 + +CLEANFILES = dep.sed .dep .dep1 + +.PHONY: install-exec-local + +install-exec-local: $(bin_PROGRAMS) $(noinst_PROGRAMS) + @list='$(noinst_PROGRAMS)'; for p in $$list; do \ + if test -f $$p; then \ + echo " $(LIBTOOL) --mode=install $(INSTALL_PROGRAM) $$p$(EXEEXT) $(bindir)/`echo $$p|sed -e 's/.new//'|sed '$(transform)'`$(EXEEXT)"; \ + $(LIBTOOL) --mode=install $(INSTALL_PROGRAM) $$p$(EXEEXT) $(bindir)/`echo $$p|sed -e 's/.new//'|sed '$(transform)'`$(EXEEXT); \ + else :; fi; \ + done + for i in $(TOOL_PROGS); do \ + if [ -f $$i ]; then \ + j=`echo $$i | sed -e 's/.new//'`; \ + rm -f $(tooldir)/bin/$$j; \ + k=`echo $$j | sed '$(transform)'`; \ + ln $(bindir)/$$k $(tooldir)/bin/$$j >/dev/null 2>/dev/null \ + || $(INSTALL_PROGRAM) $$i $(tooldir)/bin/$$j; \ + else true; \ + fi; \ + done + +# What appears below is generated by a hacked mkdep using gcc -MM. + +# DO NOT DELETE THIS LINE -- mkdep uses it. +# DO NOT PUT ANYTHING AFTER THIS LINE, IT WILL GO AWAY. + +addr2line.o: addr2line.c ../bfd/bfd.h $(INCDIR)/ansidecl.h \ + $(INCDIR)/getopt.h $(INCDIR)/libiberty.h $(INCDIR)/demangle.h \ + bucomm.h config.h $(INCDIR)/fopen-same.h +ar.o: ar.c ../bfd/bfd.h $(INCDIR)/ansidecl.h $(INCDIR)/libiberty.h \ + $(INCDIR)/progress.h bucomm.h config.h $(INCDIR)/fopen-same.h \ + $(INCDIR)/aout/ar.h $(BFDDIR)/libbfd.h arsup.h +arsup.o: arsup.c ../bfd/bfd.h $(INCDIR)/ansidecl.h \ + arsup.h $(INCDIR)/libiberty.h bucomm.h config.h $(INCDIR)/fopen-same.h +bucomm.o: bucomm.c ../bfd/bfd.h $(INCDIR)/ansidecl.h \ + $(INCDIR)/libiberty.h bucomm.h config.h $(INCDIR)/fopen-same.h +coffdump.o: coffdump.c coffgrok.h bucomm.h config.h \ + $(INCDIR)/fopen-same.h +coffgrok.o: coffgrok.c bucomm.h config.h $(INCDIR)/fopen-same.h \ + $(INCDIR)/coff/internal.h $(BFDDIR)/libcoff.h $(INCDIR)/bfdlink.h \ + coffgrok.h +debug.o: debug.c ../bfd/bfd.h $(INCDIR)/ansidecl.h \ + bucomm.h config.h $(INCDIR)/fopen-same.h $(INCDIR)/libiberty.h \ + debug.h +dlltool.o: dlltool.c ../bfd/bfd.h $(INCDIR)/ansidecl.h \ + $(INCDIR)/libiberty.h bucomm.h config.h $(INCDIR)/fopen-same.h \ + $(INCDIR)/getopt.h $(INCDIR)/demangle.h dlltool.h +filemode.o: filemode.c ../bfd/bfd.h $(INCDIR)/ansidecl.h \ + bucomm.h config.h $(INCDIR)/fopen-same.h +ieee.o: ieee.c ../bfd/bfd.h $(INCDIR)/ansidecl.h $(INCDIR)/ieee.h \ + bucomm.h config.h $(INCDIR)/fopen-same.h $(INCDIR)/libiberty.h \ + debug.h budbg.h +is-ranlib.o: is-ranlib.c +is-strip.o: is-strip.c +maybe-ranlib.o: maybe-ranlib.c +maybe-strip.o: maybe-strip.c +nlmconv.o: nlmconv.c ../bfd/bfd.h $(INCDIR)/ansidecl.h \ + $(INCDIR)/libiberty.h bucomm.h config.h $(INCDIR)/fopen-same.h \ + $(BFDDIR)/libnlm.h $(INCDIR)/nlm/common.h $(INCDIR)/nlm/internal.h \ + $(INCDIR)/nlm/external.h nlmconv.h +nm.o: nm.c ../bfd/bfd.h $(INCDIR)/ansidecl.h $(INCDIR)/progress.h \ + bucomm.h config.h $(INCDIR)/fopen-same.h $(INCDIR)/getopt.h \ + $(INCDIR)/aout/stab_gnu.h $(INCDIR)/aout/stab.def $(INCDIR)/aout/ranlib.h \ + $(INCDIR)/demangle.h $(INCDIR)/libiberty.h +not-ranlib.o: not-ranlib.c +not-strip.o: not-strip.c +objcopy.o: objcopy.c ../bfd/bfd.h $(INCDIR)/ansidecl.h \ + $(INCDIR)/progress.h bucomm.h config.h $(INCDIR)/fopen-same.h \ + $(INCDIR)/getopt.h $(INCDIR)/libiberty.h budbg.h +objdump.o: objdump.c ../bfd/bfd.h $(INCDIR)/ansidecl.h \ + $(INCDIR)/getopt.h $(INCDIR)/progress.h bucomm.h config.h \ + $(INCDIR)/fopen-same.h $(INCDIR)/dis-asm.h $(INCDIR)/libiberty.h \ + $(INCDIR)/demangle.h debug.h budbg.h $(INCDIR)/aout/aout64.h +prdbg.o: prdbg.c ../bfd/bfd.h $(INCDIR)/ansidecl.h \ + bucomm.h config.h $(INCDIR)/fopen-same.h $(INCDIR)/libiberty.h \ + debug.h budbg.h +rdcoff.o: rdcoff.c ../bfd/bfd.h $(INCDIR)/ansidecl.h \ + $(INCDIR)/coff/internal.h bucomm.h config.h $(INCDIR)/fopen-same.h \ + $(INCDIR)/libiberty.h $(INCDIR)/demangle.h debug.h \ + budbg.h $(BFDDIR)/libcoff.h $(INCDIR)/bfdlink.h +rddbg.o: rddbg.c ../bfd/bfd.h $(INCDIR)/ansidecl.h \ + bucomm.h config.h $(INCDIR)/fopen-same.h $(INCDIR)/libiberty.h \ + debug.h budbg.h +size.o: size.c ../bfd/bfd.h $(INCDIR)/ansidecl.h $(INCDIR)/getopt.h \ + bucomm.h config.h $(INCDIR)/fopen-same.h $(INCDIR)/libiberty.h +srconv.o: srconv.c bucomm.h config.h $(INCDIR)/fopen-same.h \ + sysroff.h coffgrok.h $(INCDIR)/coff/internal.h $(BFDDIR)/libcoff.h \ + $(INCDIR)/bfdlink.h sysroff.c +stabs.o: stabs.c ../bfd/bfd.h $(INCDIR)/ansidecl.h \ + bucomm.h config.h $(INCDIR)/fopen-same.h $(INCDIR)/libiberty.h \ + $(INCDIR)/demangle.h debug.h budbg.h $(INCDIR)/aout/aout64.h \ + $(INCDIR)/aout/stab_gnu.h $(INCDIR)/aout/stab.def +strings.o: strings.c ../bfd/bfd.h $(INCDIR)/ansidecl.h \ + bucomm.h config.h $(INCDIR)/fopen-same.h $(INCDIR)/libiberty.h +sysdump.o: sysdump.c ../bfd/bfd.h $(INCDIR)/ansidecl.h \ + bucomm.h config.h $(INCDIR)/fopen-same.h sysroff.h \ + sysroff.c +version.o: version.c ../bfd/bfd.h $(INCDIR)/ansidecl.h \ + bucomm.h config.h $(INCDIR)/fopen-same.h +wrstabs.o: wrstabs.c ../bfd/bfd.h $(INCDIR)/ansidecl.h \ + bucomm.h config.h $(INCDIR)/fopen-same.h $(INCDIR)/libiberty.h \ + debug.h budbg.h $(INCDIR)/aout/aout64.h $(INCDIR)/aout/stab_gnu.h \ + $(INCDIR)/aout/stab.def +windres.o: windres.c ../bfd/bfd.h $(INCDIR)/ansidecl.h \ + $(INCDIR)/getopt.h bucomm.h config.h $(INCDIR)/fopen-same.h \ + $(INCDIR)/libiberty.h $(INCDIR)/obstack.h windres.h +resrc.o: resrc.c ../bfd/bfd.h $(INCDIR)/ansidecl.h \ + bucomm.h config.h $(INCDIR)/fopen-same.h $(INCDIR)/libiberty.h \ + windres.h +rescoff.o: rescoff.c ../bfd/bfd.h $(INCDIR)/ansidecl.h \ + bucomm.h config.h $(INCDIR)/fopen-same.h $(INCDIR)/libiberty.h \ + windres.h $(INCDIR)/coff/internal.h $(BFDDIR)/libcoff.h \ + $(INCDIR)/bfdlink.h +resbin.o: resbin.c ../bfd/bfd.h $(INCDIR)/ansidecl.h \ + bucomm.h config.h $(INCDIR)/fopen-same.h $(INCDIR)/libiberty.h \ + windres.h +underscore.o: underscore.c +arparse.o: arparse.c ../bfd/bfd.h $(INCDIR)/ansidecl.h \ + bucomm.h config.h $(INCDIR)/fopen-same.h arsup.h +arlex.o: arlex.c $(INCDIR)/libiberty.h arparse.h +sysroff.o: sysroff.c +sysinfo.o: sysinfo.c +syslex.o: syslex.c sysinfo.h +defparse.o: defparse.c ../bfd/bfd.h $(INCDIR)/ansidecl.h \ + bucomm.h config.h $(INCDIR)/fopen-same.h dlltool.h +deflex.o: deflex.c $(INCDIR)/libiberty.h $(INCDIR)/ansidecl.h \ + defparse.h dlltool.h +nlmheader.o: nlmheader.c ../bfd/bfd.h bucomm.h config.h \ + $(INCDIR)/fopen-same.h $(INCDIR)/nlm/common.h $(INCDIR)/nlm/internal.h \ + nlmconv.h +rcparse.o: rcparse.c ../bfd/bfd.h $(INCDIR)/ansidecl.h \ + bucomm.h config.h $(INCDIR)/fopen-same.h $(INCDIR)/libiberty.h \ + windres.h +rclex.o: rclex.c ../bfd/bfd.h $(INCDIR)/ansidecl.h \ + bucomm.h config.h $(INCDIR)/fopen-same.h $(INCDIR)/libiberty.h \ + windres.h rcparse.h + +# IF YOU PUT ANYTHING HERE IT WILL GO AWAY diff --git a/binutils/Makefile.in b/binutils/Makefile.in index 15e1c8d..75a32b4 100644 --- a/binutils/Makefile.in +++ b/binutils/Makefile.in @@ -1,84 +1,89 @@ -# Makefile for GNU binary-file utilities -# Copyright (C) 1992, 93, 94, 95, 96, 1997 Free Software Foundation, Inc. - -# This file is part of GNU binutils. - -# This program is free software; you can redistribute it and/or modify -# it under the terms of the GNU General Public License as published by -# the Free Software Foundation; either version 2 of the License, or -# (at your option) any later version. -# -# This program is distributed in the hope that it will be useful, -# but WITHOUT ANY WARRANTY; without even the implied warranty of -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -# GNU General Public License for more details. -# -# You should have received a copy of the GNU General Public License -# along with this program; if not, write to the Free Software -# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. +# Makefile.in generated automatically by automake 1.2 from Makefile.am -VPATH = @srcdir@ -srcdir = @srcdir@ +# Copyright (C) 1994, 1995, 1996, 1997 Free Software Foundation, Inc. +# This Makefile.in is free software; the Free Software Foundation +# gives unlimited permission to copy, distribute and modify it. -target_alias = @target_alias@ -prefix = @prefix@ -program_transform_name = @program_transform_name@ +SHELL = /bin/sh + +srcdir = @srcdir@ +top_srcdir = @top_srcdir@ +VPATH = @srcdir@ +prefix = @prefix@ exec_prefix = @exec_prefix@ -bindir = @bindir@ -libdir = @libdir@ -tooldir = $(exec_prefix)/$(target_alias) +bindir = @bindir@ +sbindir = @sbindir@ +libexecdir = @libexecdir@ datadir = @datadir@ -mandir = @mandir@ -man1dir = $(mandir)/man1 -man2dir = $(mandir)/man2 -man3dir = $(mandir)/man3 -man4dir = $(mandir)/man4 -man5dir = $(mandir)/man5 -man6dir = $(mandir)/man6 -man7dir = $(mandir)/man7 -man8dir = $(mandir)/man8 -man9dir = $(mandir)/man9 +sysconfdir = @sysconfdir@ +sharedstatedir = @sharedstatedir@ +localstatedir = @localstatedir@ +libdir = @libdir@ infodir = @infodir@ +mandir = @mandir@ includedir = @includedir@ +oldincludedir = /usr/include -SHELL = /bin/sh +pkgdatadir = $(datadir)/@PACKAGE@ +pkglibdir = $(libdir)/@PACKAGE@ +pkgincludedir = $(includedir)/@PACKAGE@ + +top_builddir = . + +ACLOCAL = @ACLOCAL@ +AUTOCONF = @AUTOCONF@ +AUTOMAKE = @AUTOMAKE@ +AUTOHEADER = @AUTOHEADER@ INSTALL = @INSTALL@ INSTALL_PROGRAM = @INSTALL_PROGRAM@ INSTALL_DATA = @INSTALL_DATA@ - -AR = ar -AR_FLAGS = rc +INSTALL_SCRIPT = @INSTALL_SCRIPT@ +transform = @program_transform_name@ + +NORMAL_INSTALL = true +PRE_INSTALL = true +POST_INSTALL = true +NORMAL_UNINSTALL = true +PRE_UNINSTALL = true +POST_UNINSTALL = true +build_alias = @build_alias@ +build_triplet = @build@ +host_alias = @host_alias@ +host_triplet = @host@ +target_alias = @target_alias@ +target_triplet = @target@ +AR = @AR@ +BUILD_DLLTOOL = @BUILD_DLLTOOL@ +BUILD_NLMCONV = @BUILD_NLMCONV@ +BUILD_SRCONV = @BUILD_SRCONV@ +BUILD_WINDRES = @BUILD_WINDRES@ CC = @CC@ -CFLAGS = @CFLAGS@ -LDFLAGS = @LDFLAGS@ -HLDFLAGS = @HLDFLAGS@ -HLDENV = @HLDENV@ -RPATH_ENVVAR = @RPATH_ENVVAR@ -MAKEINFO = makeinfo -TEXI2DVI = texi2dvi -RANLIB = ranlib -BISONFLAGS = -d -TEXI2ROFF=texi2roff -MAKEOVERRIDES= -CC_FOR_BUILD = @CC_FOR_BUILD@ -NM_FOR_TARGET = nm -NM = $(NM_FOR_TARGET) -SYMLINK = ln -s +DLLTOOL_DEFS = @DLLTOOL_DEFS@ +EXEEXT = @EXEEXT@ +HDEFINES = @HDEFINES@ +LD = @LD@ +LIBTOOL = @LIBTOOL@ +LN_S = @LN_S@ +MAINT = @MAINT@ +MAKEINFO = @MAKEINFO@ +NLMCONV_DEFS = @NLMCONV_DEFS@ +PACKAGE = @PACKAGE@ +RANLIB = @RANLIB@ +UNDERSCORE = @UNDERSCORE@ +VERSION = @VERSION@ + +AUTOMAKE_OPTIONS = dejagnu -BISON = `if [ -f ../bison/bison ] ; then echo ../bison/bison -y -L../bison/bison ; else echo bison -y ; fi` -LEX_OPTIONS = -LEX = `if [ -f ../flex/flex ] ; then echo ../flex/flex ; else echo flex ; fi` +tooldir = $(exec_prefix)/$(target_alias) -# Distribution version -VERSION=cygnus-2.8.1 -# Distribution name -DIST_NAME=binutils-${VERSION} +CC_FOR_BUILD = @CC_FOR_BUILD@ -# Where to find texinfo.tex to format docn with TeX -TEXIDIR = $(srcdir)/../texinfo +YACC = `if [ -f ../bison/bison ] ; then echo ../bison/bison -y -L../bison/bison ; else echo bison -y ; fi` +YFLAGS = -d +LEX = `if [ -f ../flex/flex ] ; then echo ../flex/flex ; else echo flex ; fi` # these two are almost the same program AR_PROG=ar @@ -107,15 +112,18 @@ WINDRES_PROG=windres SRCONV_PROG=srconv sysdump coffdump -MANPAGES= ar nm objdump ranlib size strings strip objcopy addr2line nlmconv +man_MANS = ar.1 nm.1 objdump.1 ranlib.1 size.1 strings.1 strip.1 objcopy.1 \ + addr2line.1 nlmconv.1 $(DEMANGLER_PROG).1 PROGS = $(SIZE_PROG) $(OBJDUMP_PROG) $(NM_PROG) $(AR_PROG) $(STRINGS_PROG) $(STRIP_PROG) $(RANLIB_PROG) $(DEMANGLER_PROG) $(OBJCOPY_PROG) $(ADDR2LINE_PROG) @BUILD_NLMCONV@ @BUILD_SRCONV@ @BUILD_DLLTOOL@ @BUILD_WINDRES@ -STAGESTUFF = $(PROGS) *.o -# Files that can be generated, but should be in the distribution. -# Don't build $(DEMANGLER_PROG).1, since its name may vary with the -# configuration. -DISTSTUFF=arparse.c arparse.h arlex.c nlmheader.c sysinfo.c sysinfo.h \ - syslex.c deflex.c + +bin_PROGRAMS = $(SIZE_PROG) $(OBJDUMP_PROG) $(AR_PROG) $(STRINGS_PROG) \ + $(RANLIB_PROG) $(DEMANGLER_PROG) $(OBJCOPY_PROG) $(ADDR2LINE_PROG) \ + @BUILD_NLMCONV@ @BUILD_SRCONV@ @BUILD_DLLTOOL@ @BUILD_WINDRES@ + +noinst_PROGRAMS = $(NM_PROG) $(STRIP_PROG) + +EXTRA_PROGRAMS = $(NLMCONV_PROG) $(SRCONV_PROG) $(DLLTOOL_PROG) $(WINDRES_PROG) # Stuff that goes in tooldir/ if appropriate TOOL_PROGS = nm.new strip.new ar ranlib $(DLLTOOL_PROG) @@ -123,10 +131,10 @@ TOOL_PROGS = nm.new strip.new ar ranlib $(DLLTOOL_PROG) BASEDIR = $(srcdir)/.. BFDDIR = $(BASEDIR)/bfd INCDIR = $(BASEDIR)/include -INCLUDES = -I. -I$(srcdir) -I../bfd -I$(BFDDIR) -I$(INCDIR) + DEP = mkdep -ALL_CFLAGS = -D_GNU_SOURCE $(INCLUDES) @HDEFINES@ $(CFLAGS) +INCLUDES = -D_GNU_SOURCE -I. -I$(srcdir) -I../bfd -I$(BFDDIR) -I$(INCDIR) @HDEFINES@ HFILES = arsup.h bucomm.h budbg.h coffgrok.h debug.h nlmconv.h dlltool.h \ windres.h @@ -144,25 +152,17 @@ GENERATED_CFILES = \ underscore.c arparse.c arlex.c sysroff.c sysinfo.c syslex.c \ defparse.c deflex.c nlmheader.c rcparse.c rclex.c -.c.o: - $(CC) -c $(ALL_CFLAGS) $< - -DEBUG_OBJS = rddbg.o debug.o stabs.o ieee.o rdcoff.o -WRITE_DEBUG_OBJS = $(DEBUG_OBJS) wrstabs.o - -LIBIBERTY = ../libiberty/libiberty.a +DEBUG_SRCS = rddbg.c debug.c stabs.c ieee.c rdcoff.c +WRITE_DEBUG_SRCS = $(DEBUG_SRCS) wrstabs.c # Code shared by all the binutils. -BULIBS = bucomm.o version.o filemode.o +BULIBS = bucomm.c version.c filemode.c -BFDLIB_DEP = ../bfd/libbfd.a -BFDLIB = @BFDLIB@ +BFDLIB = ../bfd/libbfd.la -OPCODES_DEP = ../opcodes/libopcodes.a -OPCODES = @OPCODES@ +OPCODES = ../opcodes/libopcodes.la -ADDL_DEPS = $(BULIBS) $(BFDLIB_DEP) $(LIBIBERTY) -ADDL_LIBS = $(BULIBS) $(BFDLIB) $(LIBIBERTY) +LIBIBERTY = ../libiberty/libiberty.a EXPECT = `if [ -f $$r/../expect/expect ] ; then \ echo $$r/../expect/expect ; \ @@ -170,7 +170,6 @@ EXPECT = `if [ -f $$r/../expect/expect ] ; then \ RUNTEST = `if [ -f ${srcdir}/../dejagnu/runtest ] ; then \ echo ${srcdir}/../dejagnu/runtest ; \ else echo runtest ; fi` -RUNTESTFLAGS = CC_FOR_TARGET = ` \ if [ -f $$r/../gcc/xgcc ] ; then \ @@ -187,83 +186,712 @@ CC_FOR_TARGET = ` \ fi; \ fi` -FLAGS_TO_PASS = \ - "CC=$(CC)" \ - "CFLAGS=$(CFLAGS)" \ - "RUNTEST=$(RUNTEST)" \ - "RUNTESTFLAGS=$(RUNTESTFLAGS)" -# -## The rules - -all: $(ADDL_DEPS) $(PROGS) - -# These targets are for the dejagnu testsuites. The file site.exp -# contains global variables that all the testsuites will use. - -site.exp: ./config.status Makefile - @echo "Making a new config file..." - @rm -f ./tmp? - @touch site.exp - @mv site.exp site.bak - @echo "## variables are automatically generated by make ##" > ./tmp0 - @echo "# Do not edit here. If you wish to override these" >> ./tmp0 - @echo "# values, add them to the last section" >> ./tmp0 - @echo "# HOST AND TARGET INFO" >> ./tmp0 - @echo "set host_os @host_os@" >> ./tmp0 - @echo "set host_alias @host_alias@" >> ./tmp0 - @echo "set host_cpu @host_cpu@" >> ./tmp0 - @echo "set host_vendor @host_vendor@" >> ./tmp0 - @echo "set target_os @target_os@" >> ./tmp0 - @echo "set target_alias @target_alias@" >> ./tmp0 - @echo "set target_cpu @target_cpu@" >> ./tmp0 - @echo "set target_vendor @target_vendor@" >> ./tmp0 - @echo "set host_triplet @host@" >> ./tmp0 - @echo "set target_triplet @target@" >> ./tmp0 - @echo "# DIRECTORY INFO" >> ./tmp0 - @echo "set objdir `pwd`" >> ./tmp0 - @echo "" >> ./tmp0 - @echo "## Variables generated by configure. Do Not Edit ##" >> ./tmp0 - @cat ./tmp0 > site.exp - @cat site.bak | sed \ - -e '1,/^## Variables generated by.*##/ d' >> site.exp - -@rm -f ./tmp? - -check: site.exp - r=`pwd`; export r ; \ - srcroot=`cd ${srcdir}; pwd` ; export srcroot ; \ - EXPECT=${EXPECT} ; export EXPECT ; \ - $(RPATH_ENVVAR)=$$r/../bfd:$$r/../opcodes:$$$(RPATH_ENVVAR); \ - export $(RPATH_ENVVAR); \ - if [ -f $$r/../expect/expect ] ; then \ - TCL_LIBRARY=$${srcroot}/../tcl/library ; \ - export TCL_LIBRARY ; else true; fi ; \ - $(RUNTEST) --tool binutils --srcdir $(srcdir)/testsuite \ - $(RUNTESTFLAGS) CC_FOR_TARGET="$(CC_FOR_TARGET)" CFLAGS_FOR_TARGET="$(CFLAGS)" +info_TEXINFOS = binutils.texi -installcheck: - /bin/sh $(srcdir)/sanity.sh $(bindir) +LDADD = $(BFDLIB) $(LIBIBERTY) + +size_SOURCES = size.c $(BULIBS) + +objcopy_SOURCES = objcopy.c not-strip.c $(WRITE_DEBUG_SRCS) $(BULIBS) + +strings_SOURCES = strings.c $(BULIBS) + +strip_new_SOURCES = objcopy.c is-strip.c $(WRITE_DEBUG_SRCS) $(BULIBS) + +nm_new_SOURCES = nm.c $(BULIBS) + +objdump_SOURCES = objdump.c prdbg.c $(DEBUG_SRCS) $(BULIBS) +objdump_LDADD = $(OPCODES) $(BFDLIB) $(LIBIBERTY) + +c__filt_SOURCES = +c__filt_LDADD = cplus-dem.o underscore.o $(LIBIBERTY) + +ar_SOURCES = arparse.y arlex.l ar.c not-ranlib.c arsup.c $(BULIBS) +ar_LDADD = $(BFDLIB) $(LIBIBERTY) @LEXLIB@ + +ranlib_SOURCES = ar.c is-ranlib.c arparse.y arlex.l arsup.c $(BULIBS) +ranlib_LDADD = $(BFDLIB) $(LIBIBERTY) @LEXLIB@ + +addr2line_SOURCES = addr2line.c $(BULIBS) + +srconv_SOURCES = srconv.c coffgrok.c $(BULIBS) + +dlltool_SOURCES = dlltool.c defparse.y deflex.l $(BULIBS) +dlltool_LDADD = $(BFDLIB) $(LIBIBERTY) @LEXLIB@ + +coffdump_SOURCES = coffdump.c coffgrok.c $(BULIBS) + +sysdump_SOURCES = sysdump.c $(BULIBS) + +nlmconv_SOURCES = nlmconv.c nlmheader.y $(BULIBS) + +windres_SOURCES = windres.c resrc.c rescoff.c resbin.c rcparse.y rclex.l +windres_LDADD = $(BFDLIB) $(LIBIBERTY) @LEXLIB@ + +CLEANFILES = dep.sed .dep .dep1 +ACLOCAL_M4 = $(top_srcdir)/aclocal.m4 +mkinstalldirs = $(SHELL) $(top_srcdir)/../mkinstalldirs +CONFIG_HEADER = config.h +CONFIG_CLEAN_FILES = +PROGRAMS = $(bin_PROGRAMS) $(noinst_PROGRAMS) + + +DEFS = @DEFS@ -I. -I$(srcdir) -I. +CPPFLAGS = @CPPFLAGS@ +LDFLAGS = @LDFLAGS@ +LIBS = @LIBS@ +nlmconv_OBJECTS = nlmconv.o nlmheader.o bucomm.o version.o filemode.o +nlmconv_LDADD = $(LDADD) +nlmconv_DEPENDENCIES = ../bfd/libbfd.la ../libiberty/libiberty.a +nlmconv_LDFLAGS = +srconv_OBJECTS = srconv.o coffgrok.o bucomm.o version.o filemode.o +srconv_LDADD = $(LDADD) +srconv_DEPENDENCIES = ../bfd/libbfd.la ../libiberty/libiberty.a +srconv_LDFLAGS = +sysdump_OBJECTS = sysdump.o bucomm.o version.o filemode.o +sysdump_LDADD = $(LDADD) +sysdump_DEPENDENCIES = ../bfd/libbfd.la ../libiberty/libiberty.a +sysdump_LDFLAGS = +coffdump_OBJECTS = coffdump.o coffgrok.o bucomm.o version.o filemode.o +coffdump_LDADD = $(LDADD) +coffdump_DEPENDENCIES = ../bfd/libbfd.la ../libiberty/libiberty.a +coffdump_LDFLAGS = +dlltool_OBJECTS = dlltool.o defparse.o deflex.o bucomm.o version.o \ +filemode.o +dlltool_DEPENDENCIES = ../bfd/libbfd.la ../libiberty/libiberty.a +dlltool_LDFLAGS = +windres_OBJECTS = windres.o resrc.o rescoff.o resbin.o rcparse.o \ +rclex.o +windres_DEPENDENCIES = ../bfd/libbfd.la ../libiberty/libiberty.a +windres_LDFLAGS = +size_OBJECTS = size.o bucomm.o version.o filemode.o +size_LDADD = $(LDADD) +size_DEPENDENCIES = ../bfd/libbfd.la ../libiberty/libiberty.a +size_LDFLAGS = +objdump_OBJECTS = objdump.o prdbg.o rddbg.o debug.o stabs.o ieee.o \ +rdcoff.o bucomm.o version.o filemode.o +objdump_DEPENDENCIES = ../opcodes/libopcodes.la ../bfd/libbfd.la \ +../libiberty/libiberty.a +objdump_LDFLAGS = +ar_OBJECTS = arparse.o arlex.o ar.o not-ranlib.o arsup.o bucomm.o \ +version.o filemode.o +ar_DEPENDENCIES = ../bfd/libbfd.la ../libiberty/libiberty.a +ar_LDFLAGS = +strings_OBJECTS = strings.o bucomm.o version.o filemode.o +strings_LDADD = $(LDADD) +strings_DEPENDENCIES = ../bfd/libbfd.la ../libiberty/libiberty.a +strings_LDFLAGS = +ranlib_OBJECTS = ar.o is-ranlib.o arparse.o arlex.o arsup.o bucomm.o \ +version.o filemode.o +ranlib_DEPENDENCIES = ../bfd/libbfd.la ../libiberty/libiberty.a +ranlib_LDFLAGS = +c__filt_OBJECTS = +c__filt_DEPENDENCIES = cplus-dem.o underscore.o \ +../libiberty/libiberty.a +c__filt_LDFLAGS = +objcopy_OBJECTS = objcopy.o not-strip.o rddbg.o debug.o stabs.o ieee.o \ +rdcoff.o wrstabs.o bucomm.o version.o filemode.o +objcopy_LDADD = $(LDADD) +objcopy_DEPENDENCIES = ../bfd/libbfd.la ../libiberty/libiberty.a +objcopy_LDFLAGS = +addr2line_OBJECTS = addr2line.o bucomm.o version.o filemode.o +addr2line_LDADD = $(LDADD) +addr2line_DEPENDENCIES = ../bfd/libbfd.la ../libiberty/libiberty.a +addr2line_LDFLAGS = +nm_new_OBJECTS = nm.o bucomm.o version.o filemode.o +nm_new_LDADD = $(LDADD) +nm_new_DEPENDENCIES = ../bfd/libbfd.la ../libiberty/libiberty.a +nm_new_LDFLAGS = +strip_new_OBJECTS = objcopy.o is-strip.o rddbg.o debug.o stabs.o ieee.o \ +rdcoff.o wrstabs.o bucomm.o version.o filemode.o +strip_new_LDADD = $(LDADD) +strip_new_DEPENDENCIES = ../bfd/libbfd.la ../libiberty/libiberty.a +strip_new_LDFLAGS = +LEX_OUTPUT_ROOT = @LEX_OUTPUT_ROOT@ +LEXLIB = @LEXLIB@ +YLWRAP = $(top_srcdir)/../ylwrap +CFLAGS = @CFLAGS@ +COMPILE = $(CC) $(DEFS) $(INCLUDES) $(CPPFLAGS) $(CFLAGS) +LTCOMPILE = $(LIBTOOL) --mode=compile $(CC) $(DEFS) $(INCLUDES) $(CPPFLAGS) $(CFLAGS) +LINK = $(LIBTOOL) --mode=link $(CC) $(CFLAGS) $(LDFLAGS) -o $@ +TEXI2DVI = `if test -f $(top_srcdir)/../texinfo/util/texi2dvi; then echo $(top_srcdir)/../texinfo/util/texi2dvi; else echo texi2dvi; fi` +TEXINFO_TEX = $(top_srcdir)/../texinfo/texinfo.tex +INFO_DEPS = binutils.info +DVIS = binutils.dvi +TEXINFOS = binutils.texi +MANS = ar.1 nm.1 objdump.1 ranlib.1 size.1 strings.1 strip.1 objcopy.1 addr2line.1 nlmconv.1 $(DEMANGLER_PROG).1 + + +NROFF = nroff +DIST_COMMON = README ChangeLog Makefile.am Makefile.in NEWS acconfig.h \ +acinclude.m4 aclocal.m4 arlex.c arparse.c config.in configure \ +configure.in deflex.c defparse.c nlmheader.c rclex.c rcparse.c \ +stamp-h.in + + +DISTFILES = $(DIST_COMMON) $(SOURCES) $(HEADERS) $(TEXINFOS) $(EXTRA_DIST) + +TAR = tar +GZIP = --best +SOURCES = $(nlmconv_SOURCES) $(srconv_SOURCES) $(sysdump_SOURCES) $(coffdump_SOURCES) $(dlltool_SOURCES) $(windres_SOURCES) $(size_SOURCES) $(objdump_SOURCES) $(ar_SOURCES) $(strings_SOURCES) $(ranlib_SOURCES) $(c__filt_SOURCES) $(objcopy_SOURCES) $(addr2line_SOURCES) $(nm_new_SOURCES) $(strip_new_SOURCES) +OBJECTS = $(nlmconv_OBJECTS) $(srconv_OBJECTS) $(sysdump_OBJECTS) $(coffdump_OBJECTS) $(dlltool_OBJECTS) $(windres_OBJECTS) $(size_OBJECTS) $(objdump_OBJECTS) $(ar_OBJECTS) $(strings_OBJECTS) $(ranlib_OBJECTS) $(c__filt_OBJECTS) $(objcopy_OBJECTS) $(addr2line_OBJECTS) $(nm_new_OBJECTS) $(strip_new_OBJECTS) + +default: all + +.SUFFIXES: +.SUFFIXES: .c .dvi .h .info .l .lo .o .ps .texi .texinfo .y +$(srcdir)/Makefile.in: @MAINT@ Makefile.am $(top_srcdir)/configure.in $(ACLOCAL_M4) + cd $(top_srcdir) && $(AUTOMAKE) --cygnus Makefile + +Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status + cd $(top_builddir) \ + && CONFIG_FILES=$@ CONFIG_HEADERS= $(SHELL) ./config.status + +$(ACLOCAL_M4): @MAINT@ configure.in acinclude.m4 + cd $(srcdir) && $(ACLOCAL) + +config.status: $(srcdir)/configure + $(SHELL) ./config.status --recheck +$(srcdir)/configure: @MAINT@$(srcdir)/configure.in $(ACLOCAL_M4) $(CONFIGURE_DEPENDENCIES) + cd $(srcdir) && $(AUTOCONF) + +config.h: stamp-h +stamp-h: $(srcdir)/config.in $(top_builddir)/config.status + cd $(top_builddir) \ + && CONFIG_FILES= CONFIG_HEADERS=config.h:config.in \ + $(SHELL) ./config.status + @echo timestamp > stamp-h +$(srcdir)/config.in: @MAINT@$(srcdir)/stamp-h.in +$(srcdir)/stamp-h.in: $(top_srcdir)/configure.in $(ACLOCAL_M4) acconfig.h + cd $(top_srcdir) && $(AUTOHEADER) + @echo timestamp > $(srcdir)/stamp-h.in + +mostlyclean-hdr: + +clean-hdr: + +distclean-hdr: + rm -f config.h + +maintainer-clean-hdr: + +mostlyclean-binPROGRAMS: + +clean-binPROGRAMS: + @list='$(bin_PROGRAMS)'; for p in $$list; do \ + rm -f $$p $$p$(EXEEXT); \ + done + +distclean-binPROGRAMS: + +maintainer-clean-binPROGRAMS: + +install-binPROGRAMS: $(bin_PROGRAMS) + @$(NORMAL_INSTALL) + $(mkinstalldirs) $(bindir) + @list='$(bin_PROGRAMS)'; for p in $$list; do \ + if test -f $$p; then \ + echo " $(LIBTOOL) --mode=install $(INSTALL_PROGRAM) $$p$(EXEEXT) $(bindir)/`echo $$p|sed '$(transform)'`$(EXEEXT)"; \ + $(LIBTOOL) --mode=install $(INSTALL_PROGRAM) $$p$(EXEEXT) $(bindir)/`echo $$p|sed '$(transform)'`$(EXEEXT); \ + else :; fi; \ + done + +uninstall-binPROGRAMS: + $(NORMAL_UNINSTALL) + list='$(bin_PROGRAMS)'; for p in $$list; do \ + rm -f $(bindir)/`echo $$p|sed '$(transform)'`$(EXEEXT); \ + done + +mostlyclean-noinstPROGRAMS: -info: binutils.info +clean-noinstPROGRAMS: + @list='$(noinst_PROGRAMS)'; for p in $$list; do \ + rm -f $$p $$p$(EXEEXT); \ + done + +distclean-noinstPROGRAMS: + +maintainer-clean-noinstPROGRAMS: + +.c.o: + $(COMPILE) -c $< + +mostlyclean-compile: + rm -f *.o core + +clean-compile: + +distclean-compile: + rm -f *.tab.c + +maintainer-clean-compile: + +.c.lo: + $(LIBTOOL) --mode=compile $(COMPILE) -c $< + +mostlyclean-libtool: + rm -f *.lo + +clean-libtool: + rm -rf .libs + +distclean-libtool: + +maintainer-clean-libtool: + +nlmconv: $(nlmconv_OBJECTS) $(nlmconv_DEPENDENCIES) + @rm -f nlmconv$(EXEEXT) + $(LINK) $(nlmconv_LDFLAGS) $(nlmconv_OBJECTS) $(nlmconv_LDADD) $(LIBS) + @test -z "$(EXEEXT)" || echo timestamp > nlmconv + +srconv: $(srconv_OBJECTS) $(srconv_DEPENDENCIES) + @rm -f srconv$(EXEEXT) + $(LINK) $(srconv_LDFLAGS) $(srconv_OBJECTS) $(srconv_LDADD) $(LIBS) + @test -z "$(EXEEXT)" || echo timestamp > srconv + +sysdump: $(sysdump_OBJECTS) $(sysdump_DEPENDENCIES) + @rm -f sysdump$(EXEEXT) + $(LINK) $(sysdump_LDFLAGS) $(sysdump_OBJECTS) $(sysdump_LDADD) $(LIBS) + @test -z "$(EXEEXT)" || echo timestamp > sysdump + +coffdump: $(coffdump_OBJECTS) $(coffdump_DEPENDENCIES) + @rm -f coffdump$(EXEEXT) + $(LINK) $(coffdump_LDFLAGS) $(coffdump_OBJECTS) $(coffdump_LDADD) $(LIBS) + @test -z "$(EXEEXT)" || echo timestamp > coffdump + +dlltool: $(dlltool_OBJECTS) $(dlltool_DEPENDENCIES) + @rm -f dlltool$(EXEEXT) + $(LINK) $(dlltool_LDFLAGS) $(dlltool_OBJECTS) $(dlltool_LDADD) $(LIBS) + @test -z "$(EXEEXT)" || echo timestamp > dlltool + +windres: $(windres_OBJECTS) $(windres_DEPENDENCIES) + @rm -f windres$(EXEEXT) + $(LINK) $(windres_LDFLAGS) $(windres_OBJECTS) $(windres_LDADD) $(LIBS) + @test -z "$(EXEEXT)" || echo timestamp > windres + +size: $(size_OBJECTS) $(size_DEPENDENCIES) + @rm -f size$(EXEEXT) + $(LINK) $(size_LDFLAGS) $(size_OBJECTS) $(size_LDADD) $(LIBS) + @test -z "$(EXEEXT)" || echo timestamp > size + +objdump: $(objdump_OBJECTS) $(objdump_DEPENDENCIES) + @rm -f objdump$(EXEEXT) + $(LINK) $(objdump_LDFLAGS) $(objdump_OBJECTS) $(objdump_LDADD) $(LIBS) + @test -z "$(EXEEXT)" || echo timestamp > objdump + +ar: $(ar_OBJECTS) $(ar_DEPENDENCIES) + @rm -f ar$(EXEEXT) + $(LINK) $(ar_LDFLAGS) $(ar_OBJECTS) $(ar_LDADD) $(LIBS) + @test -z "$(EXEEXT)" || echo timestamp > ar + +strings: $(strings_OBJECTS) $(strings_DEPENDENCIES) + @rm -f strings$(EXEEXT) + $(LINK) $(strings_LDFLAGS) $(strings_OBJECTS) $(strings_LDADD) $(LIBS) + @test -z "$(EXEEXT)" || echo timestamp > strings + +ranlib: $(ranlib_OBJECTS) $(ranlib_DEPENDENCIES) + @rm -f ranlib$(EXEEXT) + $(LINK) $(ranlib_LDFLAGS) $(ranlib_OBJECTS) $(ranlib_LDADD) $(LIBS) + @test -z "$(EXEEXT)" || echo timestamp > ranlib + +c++filt: $(c__filt_OBJECTS) $(c__filt_DEPENDENCIES) + @rm -f c++filt$(EXEEXT) + $(LINK) $(c__filt_LDFLAGS) $(c__filt_OBJECTS) $(c__filt_LDADD) $(LIBS) + @test -z "$(EXEEXT)" || echo timestamp > c++filt + +objcopy: $(objcopy_OBJECTS) $(objcopy_DEPENDENCIES) + @rm -f objcopy$(EXEEXT) + $(LINK) $(objcopy_LDFLAGS) $(objcopy_OBJECTS) $(objcopy_LDADD) $(LIBS) + @test -z "$(EXEEXT)" || echo timestamp > objcopy + +addr2line: $(addr2line_OBJECTS) $(addr2line_DEPENDENCIES) + @rm -f addr2line$(EXEEXT) + $(LINK) $(addr2line_LDFLAGS) $(addr2line_OBJECTS) $(addr2line_LDADD) $(LIBS) + @test -z "$(EXEEXT)" || echo timestamp > addr2line + +nm.new: $(nm_new_OBJECTS) $(nm_new_DEPENDENCIES) + @rm -f nm.new$(EXEEXT) + $(LINK) $(nm_new_LDFLAGS) $(nm_new_OBJECTS) $(nm_new_LDADD) $(LIBS) + @test -z "$(EXEEXT)" || echo timestamp > nm.new + +strip.new: $(strip_new_OBJECTS) $(strip_new_DEPENDENCIES) + @rm -f strip.new$(EXEEXT) + $(LINK) $(strip_new_LDFLAGS) $(strip_new_OBJECTS) $(strip_new_LDADD) $(LIBS) + @test -z "$(EXEEXT)" || echo timestamp > strip.new +.y.c: + $(SHELL) $(YLWRAP) "$(YACC)" $< y.tab.c $*.c y.tab.h $*.h -- $(YFLAGS) +.y.h: + $(SHELL) $(YLWRAP) "$(YACC)" $< y.tab.c $*.c y.tab.h $*.h -- $(YFLAGS) +.l.c: + $(SHELL) $(YLWRAP) "$(LEX)" $< $(LEX_OUTPUT_ROOT).c $@ -- $(LFLAGS) + +binutils.info: binutils.texi +binutils.dvi: binutils.texi + + +DVIPS = dvips + +.texi.info: + @rm -f $@ $@-[0-9] $@-[0-9][0-9] + $(MAKEINFO) -I $(srcdir) $< + +.texi.dvi: + TEXINPUTS=$(top_srcdir)/../texinfo:$$TEXINPUTS \ + MAKEINFO='$(MAKEINFO) -I $(srcdir)' $(TEXI2DVI) $< + +.texi: + @rm -f $@ $@-[0-9] $@-[0-9][0-9] + $(MAKEINFO) -I $(srcdir) $< + +.texinfo.info: + @rm -f $@ $@-[0-9] $@-[0-9][0-9] + $(MAKEINFO) -I $(srcdir) $< + +.texinfo: + @rm -f $@ $@-[0-9] $@-[0-9][0-9] + $(MAKEINFO) -I $(srcdir) $< + +.texinfo.dvi: + TEXINPUTS=$(top_srcdir)/../texinfo:$$TEXINPUTS \ + MAKEINFO='$(MAKEINFO) -I $(srcdir)' $(TEXI2DVI) $< +.dvi.ps: + $(DVIPS) $< -o $@ + +install-info-am: $(INFO_DEPS) + @$(NORMAL_INSTALL) + $(mkinstalldirs) $(infodir) + @for file in $(INFO_DEPS); do \ + if test -f $$file; then d=.; else d=$(srcdir); fi; \ + for ifile in `cd $$d && echo $$file $$file-[0-9] $$file-[0-9][0-9]`; do \ + if test -f $$d/$$ifile; then \ + echo " $(INSTALL_DATA) $$d/$$ifile $(infodir)/$$ifile"; \ + $(INSTALL_DATA) $$d/$$ifile $(infodir)/$$ifile; \ + else : ; fi; \ + done; \ + done + @$(POST_INSTALL) + @if $(SHELL) -c 'install-info --version | sed 1q | fgrep -s -v -i debian' >/dev/null 2>&1; then \ + for file in $(INFO_DEPS); do \ + echo " install-info --info-dir=$(infodir) $(infodir)/$$file";\ + install-info --info-dir=$(infodir) $(infodir)/$$file || :;\ + done; \ + else : ; fi + +uninstall-info: + $(PRE_UNINSTALL) + @if $(SHELL) -c 'install-info --version | sed 1q | fgrep -s -v -i debian' >/dev/null 2>&1; then \ + ii=yes; \ + else ii=; fi; \ + for file in $(INFO_DEPS); do \ + test -z $ii || install-info --info-dir=$(infodir) --remove $$file; \ + done + $(NORMAL_UNINSTALL) + for file in $(INFO_DEPS); do \ + (cd $(infodir) && rm -f $$file $$file-[0-9] $$file-[0-9][0-9]); \ + done + +dist-info: $(INFO_DEPS) + for base in $(INFO_DEPS); do \ + if test -f $$base; then d=.; else d=$(srcdir); fi; \ + for file in `cd $$d && eval echo $$base*`; do \ + test -f $(distdir)/$$file \ + || ln $$d/$$file $(distdir)/$$file 2> /dev/null \ + || cp -p $$d/$$file $(distdir)/$$file; \ + done; \ + done + +mostlyclean-aminfo: + rm -f binutils.aux binutils.cp binutils.cps binutils.dvi binutils.fn \ + binutils.fns binutils.ky binutils.log binutils.pg \ + binutils.toc binutils.tp binutils.tps binutils.vr \ + binutils.vrs binutils.op binutils.tr binutils.cv + +clean-aminfo: + +distclean-aminfo: + +maintainer-clean-aminfo: + for i in $(INFO_DEPS); do rm -f `eval echo $$i*`; done +clean-info: mostlyclean-aminfo +install-man: $(MANS) + $(NORMAL_INSTALL) + $(mkinstalldirs) $(mandir)/man1 + @sect=1; \ + inst=`echo "ar" | sed '$(transform)'`.1; \ + if test -f $(srcdir)/ar.1; then file=$(srcdir)/ar.1; \ + else file=ar.1; fi; \ + echo " $(INSTALL_DATA) $$file $(mandir)/man$$sect/$$inst"; \ + $(INSTALL_DATA) $$file $(mandir)/man$$sect/$$inst + @sect=1; \ + inst=`echo "nlmconv" | sed '$(transform)'`.1; \ + if test -f $(srcdir)/nlmconv.1; then file=$(srcdir)/nlmconv.1; \ + else file=nlmconv.1; fi; \ + echo " $(INSTALL_DATA) $$file $(mandir)/man$$sect/$$inst"; \ + $(INSTALL_DATA) $$file $(mandir)/man$$sect/$$inst + @sect=1; \ + inst=`echo "$(DEMANGLER_PROG)" | sed '$(transform)'`.1; \ + if test -f $(srcdir)/$(DEMANGLER_PROG).1; then file=$(srcdir)/$(DEMANGLER_PROG).1; \ + else file=$(DEMANGLER_PROG).1; fi; \ + echo " $(INSTALL_DATA) $$file $(mandir)/man$$sect/$$inst"; \ + $(INSTALL_DATA) $$file $(mandir)/man$$sect/$$inst + @sect=1; \ + inst=`echo "nm" | sed '$(transform)'`.1; \ + if test -f $(srcdir)/nm.1; then file=$(srcdir)/nm.1; \ + else file=nm.1; fi; \ + echo " $(INSTALL_DATA) $$file $(mandir)/man$$sect/$$inst"; \ + $(INSTALL_DATA) $$file $(mandir)/man$$sect/$$inst + @sect=1; \ + inst=`echo "objdump" | sed '$(transform)'`.1; \ + if test -f $(srcdir)/objdump.1; then file=$(srcdir)/objdump.1; \ + else file=objdump.1; fi; \ + echo " $(INSTALL_DATA) $$file $(mandir)/man$$sect/$$inst"; \ + $(INSTALL_DATA) $$file $(mandir)/man$$sect/$$inst + @sect=1; \ + inst=`echo "ranlib" | sed '$(transform)'`.1; \ + if test -f $(srcdir)/ranlib.1; then file=$(srcdir)/ranlib.1; \ + else file=ranlib.1; fi; \ + echo " $(INSTALL_DATA) $$file $(mandir)/man$$sect/$$inst"; \ + $(INSTALL_DATA) $$file $(mandir)/man$$sect/$$inst + @sect=1; \ + inst=`echo "size" | sed '$(transform)'`.1; \ + if test -f $(srcdir)/size.1; then file=$(srcdir)/size.1; \ + else file=size.1; fi; \ + echo " $(INSTALL_DATA) $$file $(mandir)/man$$sect/$$inst"; \ + $(INSTALL_DATA) $$file $(mandir)/man$$sect/$$inst + @sect=1; \ + inst=`echo "strings" | sed '$(transform)'`.1; \ + if test -f $(srcdir)/strings.1; then file=$(srcdir)/strings.1; \ + else file=strings.1; fi; \ + echo " $(INSTALL_DATA) $$file $(mandir)/man$$sect/$$inst"; \ + $(INSTALL_DATA) $$file $(mandir)/man$$sect/$$inst + @sect=1; \ + inst=`echo "strip" | sed '$(transform)'`.1; \ + if test -f $(srcdir)/strip.1; then file=$(srcdir)/strip.1; \ + else file=strip.1; fi; \ + echo " $(INSTALL_DATA) $$file $(mandir)/man$$sect/$$inst"; \ + $(INSTALL_DATA) $$file $(mandir)/man$$sect/$$inst + @sect=1; \ + inst=`echo "objcopy" | sed '$(transform)'`.1; \ + if test -f $(srcdir)/objcopy.1; then file=$(srcdir)/objcopy.1; \ + else file=objcopy.1; fi; \ + echo " $(INSTALL_DATA) $$file $(mandir)/man$$sect/$$inst"; \ + $(INSTALL_DATA) $$file $(mandir)/man$$sect/$$inst + @sect=1; \ + inst=`echo "addr2line" | sed '$(transform)'`.1; \ + if test -f $(srcdir)/addr2line.1; then file=$(srcdir)/addr2line.1; \ + else file=addr2line.1; fi; \ + echo " $(INSTALL_DATA) $$file $(mandir)/man$$sect/$$inst"; \ + $(INSTALL_DATA) $$file $(mandir)/man$$sect/$$inst + +uninstall-man: + $(NORMAL_UNINSTALL) + inst=`echo "ar" | sed '$(transform)'`.1; \ + rm -f $(mandir)/man1/$$inst + inst=`echo "nlmconv" | sed '$(transform)'`.1; \ + rm -f $(mandir)/man1/$$inst + inst=`echo "$(DEMANGLER_PROG)" | sed '$(transform)'`.1; \ + rm -f $(mandir)/man1/$$inst + inst=`echo "nm" | sed '$(transform)'`.1; \ + rm -f $(mandir)/man1/$$inst + inst=`echo "objdump" | sed '$(transform)'`.1; \ + rm -f $(mandir)/man1/$$inst + inst=`echo "ranlib" | sed '$(transform)'`.1; \ + rm -f $(mandir)/man1/$$inst + inst=`echo "size" | sed '$(transform)'`.1; \ + rm -f $(mandir)/man1/$$inst + inst=`echo "strings" | sed '$(transform)'`.1; \ + rm -f $(mandir)/man1/$$inst + inst=`echo "strip" | sed '$(transform)'`.1; \ + rm -f $(mandir)/man1/$$inst + inst=`echo "objcopy" | sed '$(transform)'`.1; \ + rm -f $(mandir)/man1/$$inst + inst=`echo "addr2line" | sed '$(transform)'`.1; \ + rm -f $(mandir)/man1/$$inst + + +tags: TAGS + +ID: $(HEADERS) $(SOURCES) + here=`pwd` && cd $(srcdir) && mkid -f$$here/ID $(SOURCES) $(HEADERS) + +TAGS: $(HEADERS) $(SOURCES) config.in $(TAGS_DEPENDENCIES) + tags=; \ + here=`pwd`; \ + test -z "$(ETAGS_ARGS)config.in$(SOURCES)$(HEADERS)$$tags" \ + || (cd $(srcdir) && etags $(ETAGS_ARGS) $$tags config.in $(SOURCES) $(HEADERS) -o $$here/TAGS) + +mostlyclean-tags: + +clean-tags: + +distclean-tags: + rm -f TAGS ID + +maintainer-clean-tags: + +distdir = $(PACKAGE)-$(VERSION) +top_distdir = $(distdir) + +# This target untars the dist file and tries a VPATH configuration. Then +# it guarantees that the distribution is self-contained by making another +# tarfile. +distcheck: dist + rm -rf $(distdir) + GZIP=$(GZIP) $(TAR) zxf $(distdir).tar.gz + mkdir $(distdir)/=build + mkdir $(distdir)/=inst + dc_install_base=`cd $(distdir)/=inst && pwd`; \ + cd $(distdir)/=build \ + && ../configure --srcdir=.. --prefix=$$dc_install_base \ + && $(MAKE) \ + && $(MAKE) dvi \ + && $(MAKE) check \ + && $(MAKE) install \ + && $(MAKE) installcheck \ + && $(MAKE) dist + rm -rf $(distdir) + @echo "========================"; \ + echo "$(distdir).tar.gz is ready for distribution"; \ + echo "========================" +dist: distdir + -chmod -R a+r $(distdir) + GZIP=$(GZIP) $(TAR) chozf $(distdir).tar.gz $(distdir) + rm -rf $(distdir) +dist-all: distdir + -chmod -R a+r $(distdir) + GZIP=$(GZIP) $(TAR) chozf $(distdir).tar.gz $(distdir) + rm -rf $(distdir) +distdir: $(DISTFILES) + rm -rf $(distdir) + mkdir $(distdir) + -chmod 777 $(distdir) + @for file in $(DISTFILES); do \ + if test -f $$file; then d=.; else d=$(srcdir); fi; \ + test -f $(distdir)/$$file \ + || ln $$d/$$file $(distdir)/$$file 2> /dev/null \ + || cp -p $$d/$$file $(distdir)/$$file; \ + done + $(MAKE) top_distdir="$(top_distdir)" distdir="$(distdir)" dist-info + +RUNTESTFLAGS = -dvi: binutils.dvi +DEJATOOL = $(PACKAGE) +site.exp: Makefile + @echo 'Making a new site.exp file...' + -@rm -f site.bak + @echo '## these variables are automatically generated by make ##' > $@-t + @echo '# Do not edit here. If you wish to override these values' >> $@-t + @echo '# edit the last section' >> $@-t + @echo 'set tool $(DEJATOOL)' >> $@-t + @echo 'set srcdir $(srcdir)' >> $@-t + @echo 'set objdir' `pwd` >> $@-t + @echo 'set host_alias $(host_alias)' >> $@-t + @echo 'set host_triplet $(host_triplet)' >> $@-t + @echo 'set target_alias $(target_alias)' >> $@-t + @echo 'set target_triplet $(target_triplet)' >> $@-t + @echo 'set build_alias $(build_alias)' >> $@-t + @echo 'set build_triplet $(build_triplet)' >> $@-t + @echo '## All variables above are generated by configure. Do Not Edit ##' >> $@-t + -@sed '1,/^## All variables above are.*##/ d' site.bak >> $@-t + -@mv site.exp site.bak + @mv $@-t site.exp +info: $(INFO_DEPS) +dvi: $(DVIS) +check: all + $(MAKE) check-DEJAGNU +installcheck: +install-info: install-info-am +install-exec: install-binPROGRAMS install-exec-local + @$(NORMAL_INSTALL) -$(SIZE_PROG): $(ADDL_DEPS) size.o - $(HLDENV) $(CC) $(HLDFLAGS) $(CFLAGS) $(LDFLAGS) -o $(SIZE_PROG) size.o $(ADDL_LIBS) $(EXTRALIBS) +install-data: install-man + @$(NORMAL_INSTALL) -$(OBJCOPY_PROG): $(ADDL_DEPS) objcopy.o not-strip.o $(WRITE_DEBUG_OBJS) - $(HLDENV) $(CC) $(HLDFLAGS) $(CFLAGS) $(LDFLAGS) -o $(OBJCOPY_PROG) objcopy.o not-strip.o $(WRITE_DEBUG_OBJS) $(ADDL_LIBS) $(EXTRALIBS) +install: install-exec install-data all + @: -$(STRINGS_PROG): $(ADDL_DEPS) strings.o - $(HLDENV) $(CC) $(HLDFLAGS) $(CFLAGS) $(LDFLAGS) -o $(STRINGS_PROG) strings.o $(ADDL_LIBS) $(EXTRALIBS) +uninstall: uninstall-binPROGRAMS uninstall-man -$(STRIP_PROG): $(ADDL_DEPS) objcopy.o is-strip.o $(WRITE_DEBUG_OBJS) - $(HLDENV) $(CC) $(HLDFLAGS) $(CFLAGS) $(LDFLAGS) -o $(STRIP_PROG) objcopy.o is-strip.o $(WRITE_DEBUG_OBJS) $(ADDL_LIBS) $(EXTRALIBS) +all: Makefile $(PROGRAMS) $(MANS) config.h -$(NM_PROG): $(ADDL_DEPS) nm.o - $(HLDENV) $(CC) $(HLDFLAGS) $(CFLAGS) $(LDFLAGS) -o $(NM_PROG) nm.o $(ADDL_LIBS) $(EXTRALIBS) +install-strip: + $(MAKE) INSTALL_PROGRAM='$(INSTALL_PROGRAM) -s' INSTALL_SCRIPT='$(INSTALL_PROGRAM)' install +installdirs: + $(mkinstalldirs) $(bindir) $(mandir)/man1 + + +mostlyclean-generic: + test -z "$(MOSTLYCLEANFILES)" || rm -f $(MOSTLYCLEANFILES) + +clean-generic: + test -z "$(CLEANFILES)" || rm -f $(CLEANFILES) + +distclean-generic: + rm -f Makefile $(DISTCLEANFILES) + rm -f config.cache config.log stamp-h stamp-h[0-9]* + test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES) + +maintainer-clean-generic: + test -z "$(MAINTAINERCLEANFILES)" || rm -f $(MAINTAINERCLEANFILES) + test -z "$(BUILT_SOURCES)" || rm -f $(BUILT_SOURCES) +mostlyclean: mostlyclean-hdr mostlyclean-binPROGRAMS \ + mostlyclean-noinstPROGRAMS mostlyclean-compile \ + mostlyclean-libtool mostlyclean-aminfo mostlyclean-tags \ + mostlyclean-generic + +clean: clean-hdr clean-binPROGRAMS clean-noinstPROGRAMS clean-compile \ + clean-libtool clean-aminfo clean-tags clean-generic \ + mostlyclean + +distclean: distclean-hdr distclean-binPROGRAMS distclean-noinstPROGRAMS \ + distclean-compile distclean-libtool distclean-aminfo \ + distclean-tags distclean-generic clean + rm -f config.status + rm -f libtool + +maintainer-clean: maintainer-clean-hdr maintainer-clean-binPROGRAMS \ + maintainer-clean-noinstPROGRAMS \ + maintainer-clean-compile maintainer-clean-libtool \ + maintainer-clean-aminfo maintainer-clean-tags \ + maintainer-clean-generic distclean + @echo "This command is intended for maintainers to use;" + @echo "it deletes files that may require special tools to rebuild." + rm -f config.status + +.PHONY: default mostlyclean-hdr distclean-hdr clean-hdr \ +maintainer-clean-hdr mostlyclean-binPROGRAMS distclean-binPROGRAMS \ +clean-binPROGRAMS maintainer-clean-binPROGRAMS uninstall-binPROGRAMS \ +install-binPROGRAMS mostlyclean-noinstPROGRAMS distclean-noinstPROGRAMS \ +clean-noinstPROGRAMS maintainer-clean-noinstPROGRAMS \ +mostlyclean-compile distclean-compile clean-compile \ +maintainer-clean-compile mostlyclean-libtool distclean-libtool \ +clean-libtool maintainer-clean-libtool install-info-am uninstall-info \ +mostlyclean-aminfo distclean-aminfo clean-aminfo \ +maintainer-clean-aminfo install-man uninstall-man tags mostlyclean-tags \ +distclean-tags clean-tags maintainer-clean-tags distdir check-DEJAGNU \ +info dvi installcheck install-info install-exec install-data install \ +uninstall all installdirs mostlyclean-generic distclean-generic \ +clean-generic maintainer-clean-generic clean mostlyclean distclean \ +maintainer-clean + + +check-DEJAGNU: site.exp + srcdir=`cd $(srcdir) && pwd`; export srcdir; \ + EXPECT=$(EXPECT); export EXPECT; \ + if [ -f $(top_builddir)/../expect/expect ]; then \ + TCL_LIBRARY=`cd $(top_srcdir)/../tcl/library && pwd`; \ + export TCL_LIBRARY; \ + fi; \ + runtest=$(RUNTEST); \ + if $(SHELL) -c "$$runtest --version" > /dev/null 2>&1; then \ + $$runtest --tool $(DEJATOOL) --srcdir $${srcdir}/testsuite \ + CC_FOR_TARGET="$(CC_FOR_TARGET)" \ + CFLAGS_FOR_TARGET="$(CFLAGS)" $(RUNTESTFLAGS); \ + else echo "WARNING: could not find \`runtest'" 1>&2; :;\ + fi -$(OBJDUMP_PROG): $(ADDL_DEPS) objdump.o prdbg.o $(DEBUG_OBJS) $(OPCODES_DEP) - $(HLDENV) $(CC) $(HLDFLAGS) $(CFLAGS) $(LDFLAGS) -o $(OBJDUMP_PROG) objdump.o prdbg.o $(DEBUG_OBJS) $(OPCODES) $(ADDL_LIBS) $(EXTRALIBS) +installcheck: + /bin/sh $(srcdir)/sanity.sh $(bindir) underscore.c: stamp-under ; @true @@ -274,57 +902,31 @@ stamp-under: Makefile touch stamp-under version.o: version.c Makefile - $(CC) -DVERSION='"$(VERSION)"' $(ALL_CFLAGS) -c $(srcdir)/version.c + $(COMPILE) -c -DVERSION='"$(VERSION)"' $(srcdir)/version.c bucomm.o: bucomm.c Makefile - $(CC) -DTARGET='"@target@"' $(ALL_CFLAGS) -c $(srcdir)/bucomm.c + $(COMPILE) -c -DTARGET='"@target@"' $(srcdir)/bucomm.c cplus-dem.o: $(BASEDIR)/libiberty/cplus-dem.c $(INCDIR)/getopt.h - $(CC) -c -DMAIN -DVERSION='"$(VERSION)"' $(ALL_CFLAGS) $(BASEDIR)/libiberty/cplus-dem.c - -$(DEMANGLER_PROG): cplus-dem.o $(LIBIBERTY) underscore.o $(DEMANGLER_PROG).1 - $(HLDENV) $(CC) $(HLDFLAGS) $(CFLAGS) $(LDFLAGS) -o $(DEMANGLER_PROG) cplus-dem.o $(LIBIBERTY) $(EXTRALIBS) underscore.o - -arparse.c: arparse.y - $(BISON) $(BISONFLAGS) $(srcdir)/arparse.y - mv -f y.tab.c arparse.c - mv -f y.tab.h arparse.h - -# Separate from arparse.c so that a parallel make doesn't try to build -# both arparse.c and arparse.h simultaneously. -arparse.h: arparse.c - -arlex.c: arlex.l - $(LEX) $(LEX_OPTIONS) $(srcdir)/arlex.l - mv lex.yy.c arlex.c - -$(AR_PROG): $(ADDL_DEPS) ar.o arparse.o arlex.o not-ranlib.o arsup.o - $(HLDENV) $(CC) $(HLDFLAGS) $(CFLAGS) $(LDFLAGS) -o $(AR_PROG) ar.o arparse.o arlex.o arsup.o not-ranlib.o $(ADDL_LIBS) $(EXTRALIBS) - -$(RANLIB_PROG): $(ADDL_DEPS) ar.o is-ranlib.o arparse.o arlex.o arsup.o - $(HLDENV) $(CC) $(HLDFLAGS) $(CFLAGS) $(LDFLAGS) -o $(RANLIB_PROG) ar.o arparse.o arlex.o arsup.o is-ranlib.o $(ADDL_LIBS) $(EXTRALIBS) - -$(ADDR2LINE_PROG): $(ADDL_DEPS) addr2line.o - $(HLDENV) $(CC) $(HLDFLAGS) $(CFLAGS) $(LDFLAGS) -o $(ADDR2LINE_PROG) addr2line.o $(ADDL_LIBS) $(EXTRALIBS) + $(COMPILE) -c -DMAIN -DVERSION='"$(VERSION)"' $(BASEDIR)/libiberty/cplus-dem.c +# The following is commented out for the convertion to automake. # This rule creates a single binary that switches between ar and ranlib # by looking at argv[0]. Use this kludge to save some disk space. # However, you have to install things by hand. # (That is after 'make install', replace the installed ranlib by a link to ar.) - # Alternatively, you can install ranlib.sh as ranlib. - -ar_with_ranlib: $(ADDL_DEPS) ar.o maybe-ranlib.o - $(HLDENV) $(CC) $(HLDFLAGS) $(CFLAGS) $(LDFLAGS) -o $(AR_PROG) ar.o maybe-ranlib.o $(ADDL_LIBS) $(EXTRALIBS) - -rm -f $(RANLIB_PROG) - -ln $(AR_PROG) $(RANLIB_PROG) - +# ar_with_ranlib: $(ADDL_DEPS) ar.o maybe-ranlib.o +# $(HLDENV) $(CC) $(HLDFLAGS) $(CFLAGS) $(LDFLAGS) -o $(AR_PROG) ar.o maybe-ranlib.o $(ADDL_LIBS) $(EXTRALIBS) +# -rm -f $(RANLIB_PROG) +# -ln $(AR_PROG) $(RANLIB_PROG) +# # objcopy and strip in one binary that uses argv[0] to decide its action. - -objcopy_with_strip: $(ADDL_DEPS) objcopy.o maybe-strip.o - $(HLDENV) $(CC) $(HLDFLAGS) $(CFLAGS) $(LDFLAGS) -o $(OBJCOPY_PROG) objcopy.o maybe-strip.o $(ADDL_LIBS) $(EXTRALIBS) - -rm -f $(STRIP_PROG) - -ln $(OBJCOPY_PROG) $(STRIP_PROG) +# +#objcopy_with_strip: $(ADDL_DEPS) objcopy.o maybe-strip.o +# $(HLDENV) $(CC) $(HLDFLAGS) $(CFLAGS) $(LDFLAGS) -o $(OBJCOPY_PROG) objcopy.o maybe-strip.o $(ADDL_LIBS) $(EXTRALIBS) +# -rm -f $(STRIP_PROG) +# -ln $(OBJCOPY_PROG) $(STRIP_PROG) sysroff.c: sysinfo sysroff.info ./sysinfo -c <$(srcdir)/sysroff.info >sysroff.c @@ -334,22 +936,6 @@ sysroff.c: sysinfo sysroff.info sysroff.h: sysinfo sysroff.info ./sysinfo -d <$(srcdir)/sysroff.info >sysroff.h -# Depend upon arparse.c to avoid building both arparse.c and sysinfo.c -# simultaneously. -sysinfo.c: sysinfo.y arparse.c - $(BISON) -tvd $(srcdir)/sysinfo.y - rm -f sysinfo.c - mv -f y.tab.c sysinfo.c - mv -f y.tab.h sysinfo.h - -# Separate from sysinfo.c so that a parallel make doesn't try to build -# both sysinfo.c and sysinfo.h simultaneously. -sysinfo.h: sysinfo.c - -syslex.c : syslex.l - $(LEX) $(LEX_OPTIONS) $(srcdir)/syslex.l - mv lex.yy.c syslex.c - sysinfo: sysinfo.o syslex.o $(CC_FOR_BUILD) $(CFLAGS) $(LDFLAGS) -o $@ sysinfo.o syslex.o @@ -367,67 +953,14 @@ sysinfo.o: sysinfo.c $(CC_FOR_BUILD) -c -I. $(CFLAGS) $(srcdir)/sysinfo.c ; \ fi -srconv: srconv.o coffgrok.o $(ADDL_DEPS) - $(HLDENV) $(CC) $(HLDFLAGS) $(CFLAGS) $(LDFLAGS) -o $@ srconv.o coffgrok.o $(ADDL_LIBS) $(EXTRALIBS) - -dlltool: dlltool.o defparse.o deflex.o cplus-dem.o $(ADDL_DEPS) - $(HLDENV) $(CC) $(HLDFLAGS) $(CFLAGS) $(LDFLAGS) -o $@ dlltool.o defparse.o deflex.o $(ADDL_LIBS) $(EXTRALIBS) - -defparse.c:defparse.y - $(BISON) $(BISONFLAGS) $(srcdir)/defparse.y - mv -f y.tab.c defparse.c - mv -f y.tab.h defparse.h - -defparse.h: defparse.c - -deflex.c:deflex.l - $(LEX) $(LEX_OPTIONS) $(srcdir)/deflex.l - mv lex.yy.c deflex.c - dlltool.o:dlltool.c - $(CC) -c @DLLTOOL_DEFS@ $(ALL_CFLAGS) $(srcdir)/dlltool.c - -coffdump: coffdump.o coffgrok.o $(ADDL_DEPS) - $(HLDENV) $(CC) $(HLDFLAGS) $(CFLAGS) $(LDFLAGS) -o $@ coffdump.o coffgrok.o $(ADDL_LIBS) $(EXTRALIBS) - -sysdump: sysdump.o $(ADDL_DEPS) - $(HLDENV) $(CC) $(HLDFLAGS) $(CFLAGS) $(LDFLAGS) -o $@ sysdump.o $(ADDL_LIBS) $(EXTRALIBS) - -# Depend upon sysinfo.c to avoid building both nlmheader.c and sysinfo.c -# simultaneously. -nlmheader.c: nlmheader.y sysinfo.c - $(BISON) $(srcdir)/nlmheader.y - rm -f nlmheader.c - mv -f y.tab.c nlmheader.c + $(COMPILE) -c $(DLLTOOL_DEFS) $(srcdir)/dlltool.c # coff/sym.h and coff/ecoff.h won't be found by the automatic dependency # scripts, since they are only included conditionally. nlmconv.o: nlmconv.c $(INCDIR)/coff/sym.h $(INCDIR)/coff/ecoff.h ldname=`echo ld | sed '$(program_transform_name)'`; \ - $(CC) -c -DLD_NAME="\"$${ldname}\"" @NLMCONV_DEFS@ $(ALL_CFLAGS) $(srcdir)/nlmconv.c - -$(NLMCONV_PROG): nlmconv.o nlmheader.o $(ADDL_DEPS) - $(HLDENV) $(CC) $(HLDFLAGS) $(CFLAGS) $(LDFLAGS) -o $@ nlmconv.o nlmheader.o $(ADDL_LIBS) $(EXTRALIBS) - -WINDRES_OBJS = windres.o resrc.o rescoff.o resbin.o rcparse.o rclex.o - -$(WINDRES_PROG): $(WINDRES_OBJS) $(ADDL_DEPS) - $(HLDENV) $(CC) $(HLDFLAGS) $(CFLAGS) $(LDFLAGS) -o $@ $(WINDRES_OBJS) $(ADDL_LIBS) $(EXTRALIBS) - -# Depend upon defparse.c to avoid building both defparse.c and -# rcparse.c simultaneously. -rcparse.c: rcparse.y defparse.c - $(BISON) $(BISONFLAGS) $(srcdir)/rcparse.y - mv -f y.tab.c rcparse.c - mv -f y.tab.h rcparse.h - -rcparse.h: rcparse.c - -# Depend upon deflex.c to avoid building both deflex.c and rclex.c -# simultaneously. -rclex.c: rclex.l deflex.c - $(LEX) $(LEX_OPTIONS) $(srcdir)/rclex.l - mv lex.yy.c rclex.c + $(COMPILE) -c -DLD_NAME="\"$${ldname}\"" @NLMCONV_DEFS@ $(srcdir)/nlmconv.c # Targets to rebuild dependencies in this Makefile. # Have to get rid of .dep1 here so that "$?" later includes all of $(CFILES). @@ -459,225 +992,47 @@ dep-in: .dep cat .dep >> tmp-Makefile.in $(SHELL) $(srcdir)/../move-if-change tmp-Makefile.in $(srcdir)/Makefile.in -.PHONY: dep dep-in +dep-am: .dep + sed -e '/^..DO NOT DELETE THIS LINE/,$$d' < $(srcdir)/Makefile.am > tmp-Makefile.am + cat .dep >> tmp-Makefile.am + $(SHELL) $(srcdir)/../move-if-change tmp-Makefile.am $(srcdir)/Makefile.am + +.PHONY: dep dep-in dep-am ### # DOCUMENTATION TARGETS config.texi: Makefile rm -f config.texi echo '@set VERSION $(VERSION)' > config.texi -# TeX output + binutils.dvi: $(srcdir)/binutils.texi config.texi - TEXINPUTS=$(TEXIDIR):$$TEXINPUTS $(TEXI2DVI) $(srcdir)/binutils.texi -# info file for online browsing binutils.info: $(srcdir)/binutils.texi config.texi - $(MAKEINFO) -o binutils.info $(srcdir)/binutils.texi $(DEMANGLER_PROG).1: cxxfilt.man Makefile sed -e 's/@PROGRAM@/$(DEMANGLER_PROG)/' < $(srcdir)/cxxfilt.man \ > $(DEMANGLER_PROG).1 -# different targets for -ms, -mm, -me -# Try to use a recent texi2roff. v2 was put on prep in jan91. -# If you want an index, see texi2roff doc for postprocessing -# and add -i to texi2roff invocations below. -# Workarounds for texi2roff-2 (probably fixed in later texi2roff's, delete -# corresponding -e lines when later texi2roff's are current) -# + @ifinfo's deleted explicitly due to texi2roff-2 bug w nested constructs. -# + @c's deleted explicitly because texi2roff sees texinfo commands in them -# + @ (that's at-BLANK) not recognized by texi2roff, turned into blank -# + @alphaenumerate is ridiculously new, turned into @enumerate - -# roff output (-ms) -binutils.ms: $(srcdir)/binutils.texi - sed -e '/\\input texinfo/d' \ - -e '/@c TEXI2ROFF-KILL/,/@c END TEXI2ROFF-KILL/d' \ - -e '/^@ifinfo/,/^@end ifinfo/d' \ - -e '/^@c/d' \ - -e 's/{.*,,/{/' \ - -e 's/@ / /g' \ - -e 's/^@alphaenumerate/@enumerate/g' \ - -e 's/^@end alphaenumerate/@end enumerate/g' \ - $(srcdir)/binutils.texi | \ - $(TEXI2ROFF) -ms | \ - sed -e 's/---/\\(em/g' \ - >binutils.ms - -# roff output (-mm) -# '@noindent's removed due to texi2roff-2 mm bug; if yours is newer, -# try leaving them in -binutils.mm: $(srcdir)/binutils.texi - sed -e '/\\input texinfo/d' \ - -e '/@c TEXI2ROFF-KILL/,/@c END TEXI2ROFF-KILL/d' \ - -e '/^@ifinfo/,/^@end ifinfo/d' \ - -e '/^@c/d' \ - -e 's/{.*,,/{/' \ - -e '/@noindent/d' \ - -e 's/@ / /g' \ - -e 's/^@alphaenumerate/@enumerate/g' \ - -e 's/^@end alphaenumerate/@end enumerate/g' \ - $(srcdir)/binutils.texi | \ - $(TEXI2ROFF) -mm | \ - sed -e 's/---/\\(em/g' \ - >binutils.mm - -# roff output (-me) -binutils.me: $(srcdir)/binutils.texi - sed -e '/\\input texinfo/d' \ - -e '/@c TEXI2ROFF-KILL/,/@c END TEXI2ROFF-KILL/d' \ - -e '/^@ifinfo/,/^@end ifinfo/d' \ - -e '/^@c/d' \ - -e 's/{.*,,/{/' \ - -e 's/@ / /g' \ - -e 's/^@alphaenumerate/@enumerate/g' \ - -e 's/^@end alphaenumerate/@end enumerate/g' \ - $(srcdir)/binutils.texi | \ - $(TEXI2ROFF) -me | \ - sed -e 's/---/\\(em/g' \ - >binutils.me +.PHONY: install-exec-local - -### - -mostlyclean: - -rm -f *.o *~ \#* core binutils.?? binutils.??? y.output - -rm -rf tmpdir -clean: mostlyclean - -rm -f $(PROGS) $(DEMANGLER_PROG).1 stamp-under - -rm -f underscore.c sysroff sysroff.c sysroff.h sysinfo dep.sed -distclean: - -rm -f Makefile config.status *.o *~ \#* core y.* - -rm -f binutils.?? binutils.??? binutils.aux binutils.log binutils.toc - -rm -f $(PROGS) underscore.c config.h stamp-h config.cache config.log - -rm -f dep.sed stamp-under $(DEMANGLER_PROG).1 site.bak site.exp - -rm -f sysroff sysroff.c sysroff.h sysinfo - -rm -rf tmpdir -maintainer-clean realclean: clean distclean - @echo "This command is intended for maintainers to use;" - @echo "it deletes files that may require special tools to rebuild." - -rm -f $(DISTSTUFF) binutils.info* TAGS - -etags tags: TAGS - -TAGS: force - etags $(INCDIR)/*.h $(srcdir)/*.[hc] - -.PHONY: install installdirs - -install: all installdirs - for i in $(PROGS) ; do \ - n=`echo $$i | sed -e 's/.new//' | sed '$(program_transform_name)'`; \ - $(INSTALL_PROGRAM) $$i $(bindir)/$$n; \ - done - for i in $(MANPAGES) ; do \ - n=`echo $$i | sed '$(program_transform_name)'`; \ - $(INSTALL_DATA) $(srcdir)/$$i.1 $(man1dir)/$$n.1; \ +install-exec-local: $(bin_PROGRAMS) $(noinst_PROGRAMS) + @list='$(noinst_PROGRAMS)'; for p in $$list; do \ + if test -f $$p; then \ + echo " $(LIBTOOL) --mode=install $(INSTALL_PROGRAM) $$p$(EXEEXT) $(bindir)/`echo $$p|sed -e 's/.new//'|sed '$(transform)'`$(EXEEXT)"; \ + $(LIBTOOL) --mode=install $(INSTALL_PROGRAM) $$p$(EXEEXT) $(bindir)/`echo $$p|sed -e 's/.new//'|sed '$(transform)'`$(EXEEXT); \ + else :; fi; \ done - if [ x$(DEMANGLER_PROG) != x ]; then \ - n=`echo $(DEMANGLER_PROG) | sed '$(program_transform_name)'`; \ - $(INSTALL_DATA) $(DEMANGLER_PROG).1 $(man1dir)/$$n.1; \ - fi for i in $(TOOL_PROGS); do \ if [ -f $$i ]; then \ j=`echo $$i | sed -e 's/.new//'`; \ rm -f $(tooldir)/bin/$$j; \ - k=`echo $$j | sed '$(program_transform_name)'`; \ + k=`echo $$j | sed '$(transform)'`; \ ln $(bindir)/$$k $(tooldir)/bin/$$j >/dev/null 2>/dev/null \ || $(INSTALL_PROGRAM) $$i $(tooldir)/bin/$$j; \ else true; \ fi; \ done -installdirs: - $(SHELL) $(srcdir)/../mkinstalldirs $(bindir) $(man1dir) $(tooldir)/bin - -# This little path search is required because in the FSF net releases, -# the info files are included in the source tree, and that may not be -# the same as the build directory. -install-info: binutils.info - $(SHELL) $(srcdir)/../mkinstalldirs $(infodir) - if [ -r binutils.info ]; then \ - dir=. ; \ - else \ - dir=$(srcdir) ; \ - fi ; \ - for i in `cd $$dir; echo binutils.info*` ; do \ - $(INSTALL_DATA) $$dir/$$i $(infodir)/$$i ; \ - done - -clean-info: - -rm -rf *.info* - -# Making a dist: -# cvs rtag binutils-x-yy ld+utils -# cvs co -r binutils-x-yy ld+utils -# cd {HERE}; make dist [-f Makefile.in] - -dist: $(DIST_NAME).tar.z - -diststuff: $(DISTSTUFF) info - -$(DIST_NAME).tar.z: - cd ../..; rm -f $(DIST_NAME); ln -s devo $(DIST_NAME) - make diststuff -f Makefile.in - cd ../ld; make diststuff -f Makefile.in - cd ../gprof; make diststuff -f Makefile.in - cd ../texinfo; mv texinfo.tex ..; rm -rf *; mv ../texinfo.tex . - # Take out texinfo from configurable dirs - mv ../configure.in tmp; \ - sed -e '/^host_tools=/s/texinfo //' <tmp >../configure.in; rm tmp - cd ..; chmod og=u `find . -print` - cd ../..; tar chf - $(DIST_NAME) | gzip >$(DIST_NAME).tar.z - rm -rf ../../$(DIST_NAME) - -#----------------------------------------------------------------------------- -# 'STANDARD' GNU/960 TARGETS BELOW THIS POINT -# -# 'VERSION' file must be present and contain a string of the form "x.y" -#----------------------------------------------------------------------------- - -ver960.c: FORCE - rm -f ver960.c - echo "char ${TARG}_ver[]= \"${TARG} `cat VERSION`, `date`\";" > ver960.c - - -# Dummy target to force execution of dependent targets. -# -force: - -# Target to uncomment host-specific lines in this makefile. Such lines must -# have the following string beginning in column 1: #__<hostname>__# -# Original Makefile is backed up as 'Makefile.old'. -# -# Invoke with: make make HOST=xxx -# -make: - -@if test $(HOST)x = x ; then \ - echo 'Specify "make make HOST=???"'; \ - exit 1; \ - fi ; \ - grep -s "^#The next line was generated by 'make make'" Makefile; \ - if test $$? = 0 ; then \ - echo "Makefile has already been processed with 'make make'";\ - exit 1; \ - fi ; \ - mv -f Makefile Makefile.old; \ - echo "#The next line was generated by 'make make'" >Makefile ; \ - echo "HOST=$(HOST)" >>Makefile ; \ - echo >>Makefile ; \ - sed "s/^#__$(HOST)__#//" < Makefile.old >>Makefile - -Makefile: Makefile.in config.status - CONFIG_FILES=Makefile CONFIG_HEADERS= $(SHELL) ./config.status - -config.h: stamp-h ; @true -stamp-h: config.in config.status - CONFIG_FILES= CONFIG_HEADERS=config.h:config.in $(SHELL) ./config.status - -config.status: configure $(srcdir)/../bfd/configure.host $(srcdir)/../bfd/config.bfd - $(SHELL) ./config.status --recheck - # What appears below is generated by a hacked mkdep using gcc -MM. # DO NOT DELETE THIS LINE -- mkdep uses it. @@ -795,3 +1150,7 @@ rclex.o: rclex.c ../bfd/bfd.h $(INCDIR)/ansidecl.h \ windres.h rcparse.h # IF YOU PUT ANYTHING HERE IT WILL GO AWAY + +# Tell versions [3.59,3.63) of GNU make to not export all variables. +# Otherwise a system limit (for SysV at least) may be exceeded. +.NOEXPORT: diff --git a/binutils/acconfig.h b/binutils/acconfig.h index 6ae3d76..4a84764 100644 --- a/binutils/acconfig.h +++ b/binutils/acconfig.h @@ -1,4 +1,10 @@ +/* Name of package. */ +#undef PACKAGE + +/* Version of package. */ +#undef VERSION + /* Whether strstr must be declared even if <string.h> is included. */ #undef NEED_DECLARATION_STRSTR diff --git a/binutils/acinclude.m4 b/binutils/acinclude.m4 new file mode 100644 index 0000000..109c97c --- /dev/null +++ b/binutils/acinclude.m4 @@ -0,0 +1 @@ +sinclude(../bfd/acmacros.m4) diff --git a/binutils/aclocal.m4 b/binutils/aclocal.m4 new file mode 100644 index 0000000..29a3745 --- /dev/null +++ b/binutils/aclocal.m4 @@ -0,0 +1,295 @@ +dnl aclocal.m4 generated automatically by aclocal 1.2 + +sinclude(../bfd/acmacros.m4) + +# Do all the work for Automake. This macro actually does too much -- +# some checks are only needed if your package does certain things. +# But this isn't really a big deal. + +# serial 1 + +dnl Usage: +dnl AM_INIT_AUTOMAKE(package,version, [no-define]) + +AC_DEFUN(AM_INIT_AUTOMAKE, +[AC_REQUIRE([AM_PROG_INSTALL]) +PACKAGE=[$1] +AC_SUBST(PACKAGE) +VERSION=[$2] +AC_SUBST(VERSION) +dnl test to see if srcdir already configured +if test "`cd $srcdir && pwd`" != "`pwd`" && test -f $srcdir/config.status; then + AC_MSG_ERROR([source directory already configured; run "make distclean" there first]) +fi +ifelse([$3],, +AC_DEFINE_UNQUOTED(PACKAGE, "$PACKAGE") +AC_DEFINE_UNQUOTED(VERSION, "$VERSION")) +AM_SANITY_CHECK +AC_ARG_PROGRAM +dnl FIXME This is truly gross. +missing_dir=`cd $ac_aux_dir && pwd` +AM_MISSING_PROG(ACLOCAL, aclocal, $missing_dir) +AM_MISSING_PROG(AUTOCONF, autoconf, $missing_dir) +AM_MISSING_PROG(AUTOMAKE, automake, $missing_dir) +AM_MISSING_PROG(AUTOHEADER, autoheader, $missing_dir) +AM_MISSING_PROG(MAKEINFO, makeinfo, $missing_dir) +AC_PROG_MAKE_SET]) + + +# serial 1 + +AC_DEFUN(AM_PROG_INSTALL, +[AC_REQUIRE([AC_PROG_INSTALL]) +test -z "$INSTALL_SCRIPT" && INSTALL_SCRIPT='${INSTALL_PROGRAM}' +AC_SUBST(INSTALL_SCRIPT)dnl +]) + +# +# Check to make sure that the build environment is sane. +# + +AC_DEFUN(AM_SANITY_CHECK, +[AC_MSG_CHECKING([whether build environment is sane]) +# Just in case +sleep 1 +echo timestamp > conftestfile +# Do `set' in a subshell so we don't clobber the current shell's +# arguments. Must try -L first in case configure is actually a +# symlink; some systems play weird games with the mod time of symlinks +# (eg FreeBSD returns the mod time of the symlink's containing +# directory). +if ( + set X `ls -Lt $srcdir/configure conftestfile 2> /dev/null` + if test "$@" = "X"; then + # -L didn't work. + set X `ls -t $srcdir/configure conftestfile` + fi + test "[$]2" = conftestfile + ) +then + # Ok. + : +else + AC_MSG_ERROR([newly created file is older than distributed files! +Check your system clock]) +fi +rm -f conftest* +AC_MSG_RESULT(yes)]) + +dnl AM_MISSING_PROG(NAME, PROGRAM, DIRECTORY) +dnl The program must properly implement --version. +AC_DEFUN(AM_MISSING_PROG, +[AC_MSG_CHECKING(for working $2) +# Run test in a subshell; some versions of sh will print an error if +# an executable is not found, even if stderr is redirected. +# Redirect stdin to placate older versions of autoconf. Sigh. +if ($2 --version) < /dev/null > /dev/null 2>&1; then + $1=$2 + AC_MSG_RESULT(found) +else + $1="$3/missing $2" + AC_MSG_RESULT(missing) +fi +AC_SUBST($1)]) + + +# serial 9 AM_PROG_LIBTOOL +AC_DEFUN(AM_PROG_LIBTOOL, +[AC_REQUIRE([AC_CANONICAL_HOST]) +AC_REQUIRE([AC_PROG_CC]) +AC_REQUIRE([AC_PROG_RANLIB]) +AC_REQUIRE([AM_PROG_LD]) +AC_REQUIRE([AC_PROG_LN_S]) + +# Always use our own libtool. +LIBTOOL='$(top_builddir)/libtool' +AC_SUBST(LIBTOOL) + +dnl Allow the --disable-shared flag to stop us from building shared libs. +AC_ARG_ENABLE(shared, +[ --enable-shared build shared libraries [default=yes]], +test "$enableval" = no && libtool_shared=" --disable-shared", +libtool_shared=) + +dnl Allow the --disable-static flag to stop us from building static libs. +AC_ARG_ENABLE(static, +[ --enable-static build static libraries [default=yes]], +test "$enableval" = no && libtool_static=" --disable-static", +libtool_static=) + +libtool_flags="$libtool_shared$libtool_static" +test "$silent" = yes && libtool_flags="$libtool_flags --silent" +test "$ac_cv_prog_gcc" = yes && libtool_flags="$libtool_flags --with-gcc" +test "$ac_cv_prog_gnu_ld" = yes && libtool_flags="$libtool_flags --with-gnu-ld" + +# Some flags need to be propagated to the compiler or linker for good +# libtool support. +[case "$host" in +*-*-irix6*) + for f in '-32' '-64' '-cckr' '-n32' '-mips1' '-mips2' '-mips3' '-mips4'; do + if echo " $CC $CFLAGS " | egrep -e "[ ]$f[ ]" > /dev/null; then + LD="${LD-ld} $f" + fi + done + ;; + +*-*-sco3.2v5*) + # On SCO OpenServer 5, we need -belf to get full-featured binaries. + CFLAGS="$CFLAGS -belf" + ;; +esac] + +# Actually configure libtool. ac_aux_dir is where install-sh is found. +CC="$CC" CFLAGS="$CFLAGS" CPPFLAGS="$CPPFLAGS" \ +LD="$LD" RANLIB="$RANLIB" LN_S="$LN_S" \ +${CONFIG_SHELL-/bin/sh} $ac_aux_dir/ltconfig \ +$libtool_flags --no-verify $ac_aux_dir/ltmain.sh $host \ +|| AC_MSG_ERROR([libtool configure failed]) +]) + +# AM_PROG_LD - find the path to the GNU or non-GNU linker +AC_DEFUN(AM_PROG_LD, +[AC_ARG_WITH(gnu-ld, +[ --with-gnu-ld assume the C compiler uses GNU ld [default=no]], +test "$withval" = no || with_gnu_ld=yes, with_gnu_ld=no) +if test "$with_gnu_ld" = yes; then + AC_MSG_CHECKING([for GNU ld]) +else + AC_MSG_CHECKING([for non-GNU ld]) +fi +AC_CACHE_VAL(ac_cv_path_LD, +[case "$LD" in + /*) + ac_cv_path_LD="$LD" # Let the user override the test with a path. + ;; + *) + IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}:" + for ac_dir in $PATH; do + test -z "$ac_dir" && ac_dir=. + if test -f "$ac_dir/ld"; then + ac_cv_path_LD="$ac_dir/ld" + # Check to see if the program is GNU ld. I'd rather use --version, + # but apparently some GNU ld's only accept -v. + # Break only if it was the GNU/non-GNU ld that we prefer. + if "$ac_cv_path_LD" -v 2>&1 < /dev/null | egrep '(GNU ld|with BFD)' > /dev/null; then + test "$with_gnu_ld" = yes && break + else + test "$with_gnu_ld" != yes && break + fi + fi + done + IFS="$ac_save_ifs" + ;; +esac]) +LD="$ac_cv_path_LD" +if test -n "$LD"; then + AC_MSG_RESULT($LD) +else + AC_MSG_RESULT(no) +fi +test -z "$LD" && AC_MSG_ERROR([no acceptable ld found in \$PATH]) +AC_SUBST(LD) +AM_PROG_LD_GNU +]) + +AC_DEFUN(AM_PROG_LD_GNU, +[AC_CACHE_CHECK([whether we are using GNU ld], ac_cv_prog_gnu_ld, +[# I'd rather use --version here, but apparently some GNU ld's only accept -v. +if $LD -v 2>&1 </dev/null | egrep '(GNU ld|with BFD)' > /dev/null; then + ac_cv_prog_gnu_ld=yes +else + ac_cv_prog_gnu_ld=no +fi]) +]) + +# Like AC_CONFIG_HEADER, but automatically create stamp file. + +AC_DEFUN(AM_CONFIG_HEADER, +[AC_PREREQ([2.12]) +AC_CONFIG_HEADER([$1]) +dnl When config.status generates a header, we must update the stamp-h file. +dnl This file resides in the same directory as the config header +dnl that is generated. We must strip everything past the first ":", +dnl and everything past the last "/". +AC_OUTPUT_COMMANDS(changequote(<<,>>)dnl +ifelse(patsubst(<<$1>>, <<[^ ]>>, <<>>), <<>>, +<<test -z "<<$>>CONFIG_HEADERS" || echo timestamp > patsubst(<<$1>>, <<^\([^:]*/\)?.*>>, <<\1>>)stamp-h<<>>dnl>>, +<<am_indx=1 +for am_file in <<$1>>; do + case " <<$>>CONFIG_HEADERS " in + *" <<$>>am_file "*<<)>> + echo timestamp > `echo <<$>>am_file | sed -e 's%:.*%%' -e 's%[^/]*$%%'`stamp-h$am_indx + ;; + esac + am_indx=`expr "<<$>>am_indx" + 1` +done<<>>dnl>>) +changequote([,]))]) + +# Add --enable-maintainer-mode option to configure. +# From Jim Meyering + +# serial 1 + +AC_DEFUN(AM_MAINTAINER_MODE, +[AC_MSG_CHECKING([whether to enable maintainer-specific portions of Makefiles]) + dnl maintainer-mode is disabled by default + AC_ARG_ENABLE(maintainer-mode, +[ --enable-maintainer-mode enable make rules and dependencies not useful + (and sometimes confusing) to the casual installer], + USE_MAINTAINER_MODE=$enableval, + USE_MAINTAINER_MODE=no) + AC_MSG_RESULT($USE_MAINTAINER_MODE) + if test $USE_MAINTAINER_MODE = yes; then + MAINT= + else + MAINT='#M#' + fi + AC_SUBST(MAINT)dnl +] +) + +# Check to see if we're running under Cygwin32, without using +# AC_CANONICAL_*. If so, set output variable CYGWIN32 to "yes". +# Otherwise set it to "no". + +dnl AM_CYGWIN32() +dnl You might think we can do this by checking for a cygwin32-specific +dnl cpp define. +AC_DEFUN(AM_CYGWIN32, +[AC_CACHE_CHECK(for Cygwin32 environment, am_cv_cygwin32, +[AC_TRY_COMPILE(,[int main () { return __CYGWIN32__; }], +am_cv_cygwin32=yes, am_cv_cygwin32=no) +rm -f conftest*]) +CYGWIN32= +test "$am_cv_cygwin32" = yes && CYGWIN32=yes]) + +# Check to see if we're running under Win32, without using +# AC_CANONICAL_*. If so, set output variable EXEEXT to ".exe". +# Otherwise set it to "". + +dnl AM_EXEEXT() +dnl This knows we add .exe if we're building in the Cygwin32 +dnl environment. But if we're not, then it compiles a test program +dnl to see if there is a suffix for executables. +AC_DEFUN(AM_EXEEXT, +dnl AC_REQUIRE([AC_PROG_CC])AC_REQUIRE([AM_CYGWIN32]) +AC_MSG_CHECKING([for executable suffix]) +[AC_CACHE_VAL(am_cv_exeext, +[if test "$CYGWIN32" = yes; then +am_cv_exeext=.exe +else +cat > am_c_test.c << 'EOF' +int main() { +/* Nothing needed here */ +} +EOF +${CC-cc} -o am_c_test $CFLAGS $CPPFLAGS $LDFLAGS am_c_test.c $LIBS 1>&5 +am_cv_exeext=`ls am_c_test.* | grep -v am_c_test.c | sed -e s/am_c_test//` +rm -f am_c_test*]) +test x"${am_cv_exeext}" = x && am_cv_exeext=no +fi +EXEEXT="" +test x"${am_cv_exeext}" != xno && EXEEXT=${am_cv_exeext} +AC_MSG_RESULT(${am_cv_exeext}) +AC_SUBST(EXEEXT)]) + diff --git a/binutils/config.in b/binutils/config.in index 1ff3760..f22d34d 100644 --- a/binutils/config.in +++ b/binutils/config.in @@ -1,5 +1,63 @@ /* config.in. Generated automatically from configure.in by autoheader. */ +/* Name of package. */ +#undef PACKAGE + +/* Version of package. */ +#undef VERSION + +/* Whether strstr must be declared even if <string.h> is included. */ +#undef NEED_DECLARATION_STRSTR + +/* Whether fprintf must be declared even if <stdio.h> is included. */ +#undef NEED_DECLARATION_FPRINTF + +/* Whether sbrk must be declared even if <unistd.h> is included. */ +#undef NEED_DECLARATION_SBRK + +/* Whether getenv must be declared even if <stdlib.h> is included. */ +#undef NEED_DECLARATION_GETENV + +/* Define if using alloca.c. */ +#undef C_ALLOCA + +/* Define to one of _getb67, GETB67, getb67 for Cray-2 and Cray-YMP systems. + This function is required for alloca.c support on those systems. */ +#undef CRAY_STACKSEG_END + +/* Define if you have alloca, as a function or macro. */ +#undef HAVE_ALLOCA + +/* Define if you have <alloca.h> and it should be used (not on Ultrix). */ +#undef HAVE_ALLOCA_H + +/* Define if you have <sys/wait.h> that is POSIX.1 compatible. */ +#undef HAVE_SYS_WAIT_H + +/* Define if you have <vfork.h>. */ +#undef HAVE_VFORK_H + +/* Define to `int' if <sys/types.h> doesn't define. */ +#undef pid_t + +/* If using the C implementation of alloca, define if you know the + direction of stack growth for your system; otherwise it will be + automatically deduced at run-time. + STACK_DIRECTION > 0 => grows toward higher addresses + STACK_DIRECTION < 0 => grows toward lower addresses + STACK_DIRECTION = 0 => direction of growth unknown + */ +#undef STACK_DIRECTION + +/* Define if you have the ANSI C header files. */ +#undef STDC_HEADERS + +/* Define vfork as fork if vfork does not work. */ +#undef vfork + +/* Define if lex declares yytext as a char * by default, not a char[]. */ +#undef YYTEXT_POINTER + /* Is the type time_t defined in <time.h>? */ #undef HAVE_TIME_T_IN_TIME_H @@ -9,9 +67,6 @@ /* Does <utime.h> define struct utimbuf? */ #undef HAVE_GOOD_UTIME_H -/* Whether fprintf must be declared even if <stdio.h> is included. */ -#undef NEED_DECLARATION_FPRINTF - /* Do we need to use the b modifier when opening binary files? */ #undef USE_BINARY_FOPEN diff --git a/binutils/configure b/binutils/configure index 57ba36e..638c903 100755 --- a/binutils/configure +++ b/binutils/configure @@ -12,11 +12,18 @@ ac_help= ac_default_prefix=/usr/local # Any additions from configure.in: ac_help="$ac_help - --enable-targets alternative target configurations" + --with-gnu-ld assume the C compiler uses GNU ld [default=no]" +ac_help="$ac_help + --enable-shared build shared libraries [default=yes]" +ac_help="$ac_help + --enable-static build static libraries [default=yes]" ac_help="$ac_help - --enable-shared build shared BFD library" + --enable-targets alternative target configurations" ac_help="$ac_help --enable-commonbfdlib build shared BFD/opcodes/libiberty library" +ac_help="$ac_help + --enable-maintainer-mode enable make rules and dependencies not useful + (and sometimes confusing) to the casual installer" # Initialize some variables set by options. # The variables have the same names as the options, with @@ -525,43 +532,8 @@ fi -# Check whether --enable-targets or --disable-targets was given. -if test "${enable_targets+set}" = set; then - enableval="$enable_targets" - case "${enableval}" in - yes | "") { echo "configure: error: enable-targets option must specify target names or 'all'" 1>&2; exit 1; } - ;; - no) enable_targets= ;; - *) enable_targets=$enableval ;; -esac -fi -# Check whether --enable-shared or --disable-shared was given. -if test "${enable_shared+set}" = set; then - enableval="$enable_shared" - case "${enableval}" in - yes) shared=true shared_bfd=true shared_opcodes=true ;; - no) shared=false ;; - *bfd*opcodes*) shared=true shared_bfd=true shared_opcodes=true ;; - *opcodes*bfd*) shared=true shared_bfd=true shared_opcodes=true ;; - *bfd*) shared=true shared_bfd=true ;; - *opcodes*) shared=true shared_opcodes=true ;; - *) shared=false ;; -esac -fi -# Check whether --enable-commonbfdlib or --disable-commonbfdlib was given. -if test "${enable_commonbfdlib+set}" = set; then - enableval="$enable_commonbfdlib" - case "${enableval}" in - yes) commonbfdlib=true ;; - no) commonbfdlib=false ;; - *) { echo "configure: error: bad value ${enableval} for BFD commonbfdlib option" 1>&2; exit 1; } ;; -esac -fi - - - ac_aux_dir= -for ac_dir in `cd $srcdir/..; pwd` $srcdir/`cd $srcdir/..; pwd`; do +for ac_dir in $srcdir $srcdir/.. $srcdir/../..; do if test -f $ac_dir/install-sh; then ac_aux_dir=$ac_dir ac_install_sh="$ac_aux_dir/install-sh -c" @@ -573,7 +545,7 @@ for ac_dir in `cd $srcdir/..; pwd` $srcdir/`cd $srcdir/..; pwd`; do fi done if test -z "$ac_aux_dir"; then - { echo "configure: error: can not find install-sh or install.sh in `cd $srcdir/..; pwd` $srcdir/`cd $srcdir/..; pwd`" 1>&2; exit 1; } + { echo "configure: error: can not find install-sh or install.sh in $srcdir $srcdir/.. $srcdir/../.." 1>&2; exit 1; } fi ac_config_guess=$ac_aux_dir/config.guess ac_config_sub=$ac_aux_dir/config.sub @@ -607,7 +579,7 @@ else { echo "configure: error: can not run $ac_config_sub" 1>&2; exit 1; } fi echo $ac_n "checking host system type""... $ac_c" 1>&6 -echo "configure:611: checking host system type" >&5 +echo "configure:583: checking host system type" >&5 host_alias=$host case "$host_alias" in @@ -628,7 +600,7 @@ host_os=`echo $host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'` echo "$ac_t""$host" 1>&6 echo $ac_n "checking target system type""... $ac_c" 1>&6 -echo "configure:632: checking target system type" >&5 +echo "configure:604: checking target system type" >&5 target_alias=$target case "$target_alias" in @@ -646,7 +618,7 @@ target_os=`echo $target | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'` echo "$ac_t""$target" 1>&6 echo $ac_n "checking build system type""... $ac_c" 1>&6 -echo "configure:650: checking build system type" >&5 +echo "configure:622: checking build system type" >&5 build_alias=$build case "$build_alias" in @@ -668,12 +640,113 @@ test "$host_alias" != "$target_alias" && NONENONEs,x,x, && program_prefix=${target_alias}- -if test -z "$target" ; then - { echo "configure: error: Unrecognized target system type; please check config.sub." 1>&2; exit 1; } + +# Find a good install program. We prefer a C program (faster), +# so one script is as good as another. But avoid the broken or +# incompatible versions: +# SysV /etc/install, /usr/sbin/install +# SunOS /usr/etc/install +# IRIX /sbin/install +# AIX /bin/install +# AFS /usr/afsws/bin/install, which mishandles nonexistent args +# SVR4 /usr/ucb/install, which tries to use the nonexistent group "staff" +# ./install, which can be erroneously created by make from ./install.sh. +echo $ac_n "checking for a BSD compatible install""... $ac_c" 1>&6 +echo "configure:656: checking for a BSD compatible install" >&5 +if test -z "$INSTALL"; then +if eval "test \"`echo '$''{'ac_cv_path_install'+set}'`\" = set"; then + echo $ac_n "(cached) $ac_c" 1>&6 +else + IFS="${IFS= }"; ac_save_IFS="$IFS"; IFS="${IFS}:" + for ac_dir in $PATH; do + # Account for people who put trailing slashes in PATH elements. + case "$ac_dir/" in + /|./|.//|/etc/*|/usr/sbin/*|/usr/etc/*|/sbin/*|/usr/afsws/bin/*|/usr/ucb/*) ;; + *) + # OSF1 and SCO ODT 3.0 have their own names for install. + for ac_prog in ginstall installbsd scoinst install; do + if test -f $ac_dir/$ac_prog; then + if test $ac_prog = install && + grep dspmsg $ac_dir/$ac_prog >/dev/null 2>&1; then + # AIX install. It has an incompatible calling convention. + # OSF/1 installbsd also uses dspmsg, but is usable. + : + else + ac_cv_path_install="$ac_dir/$ac_prog -c" + break 2 + fi + fi + done + ;; + esac + done + IFS="$ac_save_IFS" + fi -if test -z "$host" ; then - { echo "configure: error: Unrecognized host system type; please check config.sub." 1>&2; exit 1; } + if test "${ac_cv_path_install+set}" = set; then + INSTALL="$ac_cv_path_install" + else + # As a last resort, use the slow shell script. We don't cache a + # path for INSTALL within a source directory, because that will + # break other packages using the cache if that directory is + # removed, or if the path is relative. + INSTALL="$ac_install_sh" + fi fi +echo "$ac_t""$INSTALL" 1>&6 + +# Use test -z because SunOS4 sh mishandles braces in ${var-val}. +# It thinks the first close brace ends the variable substitution. +test -z "$INSTALL_PROGRAM" && INSTALL_PROGRAM='${INSTALL}' + +test -z "$INSTALL_DATA" && INSTALL_DATA='${INSTALL} -m 644' + + +test -z "$INSTALL_SCRIPT" && INSTALL_SCRIPT='${INSTALL_PROGRAM}' + + +PACKAGE=binutils + +VERSION=2.8.2 + +if test "`cd $srcdir && pwd`" != "`pwd`" && test -f $srcdir/config.status; then + { echo "configure: error: source directory already configured; run "make distclean" there first" 1>&2; exit 1; } +fi +cat >> confdefs.h <<EOF +#define PACKAGE "$PACKAGE" +EOF + +cat >> confdefs.h <<EOF +#define VERSION "$VERSION" +EOF + +echo $ac_n "checking whether build environment is sane""... $ac_c" 1>&6 +echo "configure:725: checking whether build environment is sane" >&5 +# Just in case +sleep 1 +echo timestamp > conftestfile +# Do `set' in a subshell so we don't clobber the current shell's +# arguments. Must try -L first in case configure is actually a +# symlink; some systems play weird games with the mod time of symlinks +# (eg FreeBSD returns the mod time of the symlink's containing +# directory). +if ( + set X `ls -Lt $srcdir/configure conftestfile 2> /dev/null` + if test "" = "X"; then + # -L didn't work. + set X `ls -t $srcdir/configure conftestfile` + fi + test "$2" = conftestfile + ) +then + # Ok. + : +else + { echo "configure: error: newly created file is older than distributed files! +Check your system clock" 1>&2; exit 1; } +fi +rm -f conftest* +echo "$ac_t""yes" 1>&6 if test "$program_transform_name" = s,x,x,; then program_transform_name= else @@ -693,18 +766,104 @@ test "$program_suffix" != NONE && # sed with no file args requires a program. test "$program_transform_name" = "" && program_transform_name="s,x,x," +missing_dir=`cd $ac_aux_dir && pwd` +echo $ac_n "checking for working aclocal""... $ac_c" 1>&6 +echo "configure:772: checking for working aclocal" >&5 +# Run test in a subshell; some versions of sh will print an error if +# an executable is not found, even if stderr is redirected. +# Redirect stdin to placate older versions of autoconf. Sigh. +if (aclocal --version) < /dev/null > /dev/null 2>&1; then + ACLOCAL=aclocal + echo "$ac_t""found" 1>&6 +else + ACLOCAL="$missing_dir/missing aclocal" + echo "$ac_t""missing" 1>&6 +fi + +echo $ac_n "checking for working autoconf""... $ac_c" 1>&6 +echo "configure:785: checking for working autoconf" >&5 +# Run test in a subshell; some versions of sh will print an error if +# an executable is not found, even if stderr is redirected. +# Redirect stdin to placate older versions of autoconf. Sigh. +if (autoconf --version) < /dev/null > /dev/null 2>&1; then + AUTOCONF=autoconf + echo "$ac_t""found" 1>&6 +else + AUTOCONF="$missing_dir/missing autoconf" + echo "$ac_t""missing" 1>&6 +fi + +echo $ac_n "checking for working automake""... $ac_c" 1>&6 +echo "configure:798: checking for working automake" >&5 +# Run test in a subshell; some versions of sh will print an error if +# an executable is not found, even if stderr is redirected. +# Redirect stdin to placate older versions of autoconf. Sigh. +if (automake --version) < /dev/null > /dev/null 2>&1; then + AUTOMAKE=automake + echo "$ac_t""found" 1>&6 +else + AUTOMAKE="$missing_dir/missing automake" + echo "$ac_t""missing" 1>&6 +fi + +echo $ac_n "checking for working autoheader""... $ac_c" 1>&6 +echo "configure:811: checking for working autoheader" >&5 +# Run test in a subshell; some versions of sh will print an error if +# an executable is not found, even if stderr is redirected. +# Redirect stdin to placate older versions of autoconf. Sigh. +if (autoheader --version) < /dev/null > /dev/null 2>&1; then + AUTOHEADER=autoheader + echo "$ac_t""found" 1>&6 +else + AUTOHEADER="$missing_dir/missing autoheader" + echo "$ac_t""missing" 1>&6 +fi + +echo $ac_n "checking for working makeinfo""... $ac_c" 1>&6 +echo "configure:824: checking for working makeinfo" >&5 +# Run test in a subshell; some versions of sh will print an error if +# an executable is not found, even if stderr is redirected. +# Redirect stdin to placate older versions of autoconf. Sigh. +if (makeinfo --version) < /dev/null > /dev/null 2>&1; then + MAKEINFO=makeinfo + echo "$ac_t""found" 1>&6 +else + MAKEINFO="$missing_dir/missing makeinfo" + echo "$ac_t""missing" 1>&6 +fi + +echo $ac_n "checking whether ${MAKE-make} sets \${MAKE}""... $ac_c" 1>&6 +echo "configure:837: checking whether ${MAKE-make} sets \${MAKE}" >&5 +set dummy ${MAKE-make}; ac_make=`echo "$2" | sed 'y%./+-%__p_%'` +if eval "test \"`echo '$''{'ac_cv_prog_make_${ac_make}_set'+set}'`\" = set"; then + echo $ac_n "(cached) $ac_c" 1>&6 +else + cat > conftestmake <<\EOF +all: + @echo 'ac_maketemp="${MAKE}"' +EOF +# GNU make sometimes prints "make[1]: Entering...", which would confuse us. +eval `${MAKE-make} -f conftestmake 2>/dev/null | grep temp=` +if test -n "$ac_maketemp"; then + eval ac_cv_prog_make_${ac_make}_set=yes +else + eval ac_cv_prog_make_${ac_make}_set=no +fi +rm -f conftestmake +fi +if eval "test \"`echo '$ac_cv_prog_make_'${ac_make}_set`\" = yes"; then + echo "$ac_t""yes" 1>&6 + SET_MAKE= +else + echo "$ac_t""no" 1>&6 + SET_MAKE="MAKE=${MAKE-make}" +fi -# host-specific stuff: - -HDEFINES= -HLDFLAGS= -HLDENV= -RPATH_ENVVAR=LD_LIBRARY_PATH # Extract the first word of "gcc", so it can be a program name with args. set dummy gcc; ac_word=$2 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 -echo "configure:708: checking for $ac_word" >&5 +echo "configure:867: checking for $ac_word" >&5 if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -733,7 +892,7 @@ if test -z "$CC"; then # Extract the first word of "cc", so it can be a program name with args. set dummy cc; ac_word=$2 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 -echo "configure:737: checking for $ac_word" >&5 +echo "configure:896: checking for $ac_word" >&5 if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -781,7 +940,7 @@ fi fi echo $ac_n "checking whether the C compiler ($CC $CFLAGS $LDFLAGS) works""... $ac_c" 1>&6 -echo "configure:785: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) works" >&5 +echo "configure:944: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) works" >&5 ac_ext=c # CFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options. @@ -791,11 +950,11 @@ ac_link='${CC-cc} -o conftest $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS cross_compiling=$ac_cv_prog_cc_cross cat > conftest.$ac_ext <<EOF -#line 795 "configure" +#line 954 "configure" #include "confdefs.h" main(){return(0);} EOF -if { (eval echo configure:799: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then +if { (eval echo configure:958: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then ac_cv_prog_cc_works=yes # If we can't run a trivial program, we are probably using a cross compiler. if (./conftest; exit) 2>/dev/null; then @@ -815,12 +974,12 @@ if test $ac_cv_prog_cc_works = no; then { echo "configure: error: installation or configuration problem: C compiler cannot create executables." 1>&2; exit 1; } fi echo $ac_n "checking whether the C compiler ($CC $CFLAGS $LDFLAGS) is a cross-compiler""... $ac_c" 1>&6 -echo "configure:819: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) is a cross-compiler" >&5 +echo "configure:978: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) is a cross-compiler" >&5 echo "$ac_t""$ac_cv_prog_cc_cross" 1>&6 cross_compiling=$ac_cv_prog_cc_cross echo $ac_n "checking whether we are using GNU C""... $ac_c" 1>&6 -echo "configure:824: checking whether we are using GNU C" >&5 +echo "configure:983: checking whether we are using GNU C" >&5 if eval "test \"`echo '$''{'ac_cv_prog_gcc'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -829,7 +988,7 @@ else yes; #endif EOF -if { ac_try='${CC-cc} -E conftest.c'; { (eval echo configure:833: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }; } | egrep yes >/dev/null 2>&1; then +if { ac_try='${CC-cc} -E conftest.c'; { (eval echo configure:992: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }; } | egrep yes >/dev/null 2>&1; then ac_cv_prog_gcc=yes else ac_cv_prog_gcc=no @@ -844,7 +1003,7 @@ if test $ac_cv_prog_gcc = yes; then ac_save_CFLAGS="$CFLAGS" CFLAGS= echo $ac_n "checking whether ${CC-cc} accepts -g""... $ac_c" 1>&6 -echo "configure:848: checking whether ${CC-cc} accepts -g" >&5 +echo "configure:1007: checking whether ${CC-cc} accepts -g" >&5 if eval "test \"`echo '$''{'ac_cv_prog_cc_g'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -871,19 +1030,10 @@ else test "${CFLAGS+set}" = set || CFLAGS="-g" fi - -. ${srcdir}/../bfd/configure.host - - - - - -AR=${AR-ar} - # Extract the first word of "ranlib", so it can be a program name with args. set dummy ranlib; ac_word=$2 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 -echo "configure:887: checking for $ac_word" >&5 +echo "configure:1037: checking for $ac_word" >&5 if eval "test \"`echo '$''{'ac_cv_prog_RANLIB'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -909,127 +1059,486 @@ else echo "$ac_t""no" 1>&6 fi -# Find a good install program. We prefer a C program (faster), -# so one script is as good as another. But avoid the broken or -# incompatible versions: -# SysV /etc/install, /usr/sbin/install -# SunOS /usr/etc/install -# IRIX /sbin/install -# AIX /bin/install -# AFS /usr/afsws/bin/install, which mishandles nonexistent args -# SVR4 /usr/ucb/install, which tries to use the nonexistent group "staff" -# ./install, which can be erroneously created by make from ./install.sh. -echo $ac_n "checking for a BSD compatible install""... $ac_c" 1>&6 -echo "configure:924: checking for a BSD compatible install" >&5 -if test -z "$INSTALL"; then -if eval "test \"`echo '$''{'ac_cv_path_install'+set}'`\" = set"; then +# Check whether --with-gnu-ld or --without-gnu-ld was given. +if test "${with_gnu_ld+set}" = set; then + withval="$with_gnu_ld" + test "$withval" = no || with_gnu_ld=yes +else + with_gnu_ld=no +fi + +if test "$with_gnu_ld" = yes; then + echo $ac_n "checking for GNU ld""... $ac_c" 1>&6 +echo "configure:1073: checking for GNU ld" >&5 +else + echo $ac_n "checking for non-GNU ld""... $ac_c" 1>&6 +echo "configure:1076: checking for non-GNU ld" >&5 +fi +if eval "test \"`echo '$''{'ac_cv_path_LD'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else - IFS="${IFS= }"; ac_save_IFS="$IFS"; IFS="${IFS}:" + case "$LD" in + /*) + ac_cv_path_LD="$LD" # Let the user override the test with a path. + ;; + *) + IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}:" for ac_dir in $PATH; do - # Account for people who put trailing slashes in PATH elements. - case "$ac_dir/" in - /|./|.//|/etc/*|/usr/sbin/*|/usr/etc/*|/sbin/*|/usr/afsws/bin/*|/usr/ucb/*) ;; - *) - # OSF1 and SCO ODT 3.0 have their own names for install. - for ac_prog in ginstall installbsd scoinst install; do - if test -f $ac_dir/$ac_prog; then - if test $ac_prog = install && - grep dspmsg $ac_dir/$ac_prog >/dev/null 2>&1; then - # AIX install. It has an incompatible calling convention. - # OSF/1 installbsd also uses dspmsg, but is usable. - : - else - ac_cv_path_install="$ac_dir/$ac_prog -c" - break 2 - fi - fi - done - ;; - esac + test -z "$ac_dir" && ac_dir=. + if test -f "$ac_dir/ld"; then + ac_cv_path_LD="$ac_dir/ld" + # Check to see if the program is GNU ld. I'd rather use --version, + # but apparently some GNU ld's only accept -v. + # Break only if it was the GNU/non-GNU ld that we prefer. + if "$ac_cv_path_LD" -v 2>&1 < /dev/null | egrep '(GNU ld|with BFD)' > /dev/null; then + test "$with_gnu_ld" = yes && break + else + test "$with_gnu_ld" != yes && break + fi + fi done - IFS="$ac_save_IFS" + IFS="$ac_save_ifs" + ;; +esac +fi +LD="$ac_cv_path_LD" +if test -n "$LD"; then + echo "$ac_t""$LD" 1>&6 +else + echo "$ac_t""no" 1>&6 +fi +test -z "$LD" && { echo "configure: error: no acceptable ld found in \$PATH" 1>&2; exit 1; } + +echo $ac_n "checking whether we are using GNU ld""... $ac_c" 1>&6 +echo "configure:1115: checking whether we are using GNU ld" >&5 +if eval "test \"`echo '$''{'ac_cv_prog_gnu_ld'+set}'`\" = set"; then + echo $ac_n "(cached) $ac_c" 1>&6 +else + # I'd rather use --version here, but apparently some GNU ld's only accept -v. +if $LD -v 2>&1 </dev/null | egrep '(GNU ld|with BFD)' > /dev/null; then + ac_cv_prog_gnu_ld=yes +else + ac_cv_prog_gnu_ld=no fi - if test "${ac_cv_path_install+set}" = set; then - INSTALL="$ac_cv_path_install" - else - # As a last resort, use the slow shell script. We don't cache a - # path for INSTALL within a source directory, because that will - # break other packages using the cache if that directory is - # removed, or if the path is relative. - INSTALL="$ac_install_sh" - fi fi -echo "$ac_t""$INSTALL" 1>&6 -# Use test -z because SunOS4 sh mishandles braces in ${var-val}. -# It thinks the first close brace ends the variable substitution. -test -z "$INSTALL_PROGRAM" && INSTALL_PROGRAM='${INSTALL}' +echo "$ac_t""$ac_cv_prog_gnu_ld" 1>&6 -test -z "$INSTALL_DATA" && INSTALL_DATA='${INSTALL} -m 644' +echo $ac_n "checking whether ln -s works""... $ac_c" 1>&6 +echo "configure:1131: checking whether ln -s works" >&5 +if eval "test \"`echo '$''{'ac_cv_prog_LN_S'+set}'`\" = set"; then + echo $ac_n "(cached) $ac_c" 1>&6 +else + rm -f conftestdata +if ln -s X conftestdata 2>/dev/null +then + rm -f conftestdata + ac_cv_prog_LN_S="ln -s" +else + ac_cv_prog_LN_S=ln +fi +fi +LN_S="$ac_cv_prog_LN_S" +if test "$ac_cv_prog_LN_S" = "ln -s"; then + echo "$ac_t""yes" 1>&6 +else + echo "$ac_t""no" 1>&6 +fi -# For most hosts we can use a simple definition to pick up the BFD and -# opcodes libraries. However, if we are building shared libraries, we -# need to handle some hosts specially. -BFDLIB='-L../bfd -lbfd' -OPCODES='-L../opcodes -lopcodes' -case "${host}" in -*-*-sunos*) - # On SunOS, we must link against the name we are going to install, - # not -lbfd, since SunOS does not support SONAME. - if test "${shared_bfd}" = "true"; then - BFDLIB='-L../bfd -l`echo bfd | sed '"'"'$(program_transform_name)'"'"'`' - fi - if test "${shared_opcodes}" = "true"; then - OPCODES='-L../opcodes -l`echo opcodes | sed '"'"'$(program_transform_name)'"'"'`' - fi + + + + + +# Always use our own libtool. +LIBTOOL='$(top_builddir)/libtool' + + +# Check whether --enable-shared or --disable-shared was given. +if test "${enable_shared+set}" = set; then + enableval="$enable_shared" + test "$enableval" = no && libtool_shared=" --disable-shared" +else + libtool_shared= +fi + + +# Check whether --enable-static or --disable-static was given. +if test "${enable_static+set}" = set; then + enableval="$enable_static" + test "$enableval" = no && libtool_static=" --disable-static" +else + libtool_static= +fi + + +libtool_flags="$libtool_shared$libtool_static" +test "$silent" = yes && libtool_flags="$libtool_flags --silent" +test "$ac_cv_prog_gcc" = yes && libtool_flags="$libtool_flags --with-gcc" +test "$ac_cv_prog_gnu_ld" = yes && libtool_flags="$libtool_flags --with-gnu-ld" + +# Some flags need to be propagated to the compiler or linker for good +# libtool support. +case "$host" in +*-*-irix6*) + for f in '-32' '-64' '-cckr' '-n32' '-mips1' '-mips2' '-mips3' '-mips4'; do + if echo " $CC $CFLAGS " | egrep -e "[ ]$f[ ]" > /dev/null; then + LD="${LD-ld} $f" + fi + done ;; -alpha*-*-osf*) - # On Alpha OSF/1, the native linker searches all the -L - # directories for any LIB.so files, and only then searches for any - # LIB.a files. That means that if there is an installed - # libbfd.so, but this build is not done with --enable-shared, the - # link will wind up being against the install libbfd.so rather - # than the newly built libbfd. To avoid this, we must explicitly - # link against libbfd.a when --enable-shared is not used. - if test "${shared_bfd}" != "true"; then - BFDLIB='../bfd/libbfd.a' - fi - if test "${shared_opcodes}" != "true"; then - OPCODES='../opcodes/libopcodes.a' - fi + +*-*-sco3.2v5*) + # On SCO OpenServer 5, we need -belf to get full-featured binaries. + CFLAGS="$CFLAGS -belf" ;; esac -if test "${commonbfdlib}" = "true"; then - # when a shared libbfd is built with --enable-commonbfdlib, - # all of libopcodes is available in libbfd.so. Unfortunately, on - # HP/UX, when using gcc -g, the linker does a static link, so we - # need to continue linking against opcodes on that platform. - case "${host}" in - *-*-hpux*) ;; - *) OPCODES= ;; - esac +# Actually configure libtool. ac_aux_dir is where install-sh is found. +CC="$CC" CFLAGS="$CFLAGS" CPPFLAGS="$CPPFLAGS" \ +LD="$LD" RANLIB="$RANLIB" LN_S="$LN_S" \ +${CONFIG_SHELL-/bin/sh} $ac_aux_dir/ltconfig \ +$libtool_flags --no-verify $ac_aux_dir/ltmain.sh $host \ +|| { echo "configure: error: libtool configure failed" 1>&2; exit 1; } + + +# Check whether --enable-targets or --disable-targets was given. +if test "${enable_targets+set}" = set; then + enableval="$enable_targets" + case "${enableval}" in + yes | "") { echo "configure: error: enable-targets option must specify target names or 'all'" 1>&2; exit 1; } + ;; + no) enable_targets= ;; + *) enable_targets=$enableval ;; +esac +fi +# Check whether --enable-commonbfdlib or --disable-commonbfdlib was given. +if test "${enable_commonbfdlib+set}" = set; then + enableval="$enable_commonbfdlib" + case "${enableval}" in + yes) commonbfdlib=true ;; + no) commonbfdlib=false ;; + *) { echo "configure: error: bad value ${enableval} for BFD commonbfdlib option" 1>&2; exit 1; } ;; +esac fi -# Put a plausible default for CC_FOR_BUILD in Makefile. -if test -z "$CC_FOR_BUILD"; then - if test "x$cross_compiling" = "xno"; then - CC_FOR_BUILD='$(CC)' + +if test -z "$target" ; then + { echo "configure: error: Unrecognized target system type; please check config.sub." 1>&2; exit 1; } +fi +if test -z "$host" ; then + { echo "configure: error: Unrecognized host system type; please check config.sub." 1>&2; exit 1; } +fi +if test "$program_transform_name" = s,x,x,; then + program_transform_name= +else + # Double any \ or $. echo might interpret backslashes. + cat <<\EOF_SED > conftestsed +s,\\,\\\\,g; s,\$,$$,g +EOF_SED + program_transform_name="`echo $program_transform_name|sed -f conftestsed`" + rm -f conftestsed +fi +test "$program_prefix" != NONE && + program_transform_name="s,^,${program_prefix},; $program_transform_name" +# Use a double $ so make ignores it. +test "$program_suffix" != NONE && + program_transform_name="s,\$\$,${program_suffix},; $program_transform_name" + +# sed with no file args requires a program. +test "$program_transform_name" = "" && program_transform_name="s,x,x," + + +# Extract the first word of "gcc", so it can be a program name with args. +set dummy gcc; ac_word=$2 +echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 +echo "configure:1262: checking for $ac_word" >&5 +if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then + echo $ac_n "(cached) $ac_c" 1>&6 +else + if test -n "$CC"; then + ac_cv_prog_CC="$CC" # Let the user override the test. +else + IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}:" + for ac_dir in $PATH; do + test -z "$ac_dir" && ac_dir=. + if test -f $ac_dir/$ac_word; then + ac_cv_prog_CC="gcc" + break + fi + done + IFS="$ac_save_ifs" +fi +fi +CC="$ac_cv_prog_CC" +if test -n "$CC"; then + echo "$ac_t""$CC" 1>&6 +else + echo "$ac_t""no" 1>&6 +fi + +if test -z "$CC"; then + # Extract the first word of "cc", so it can be a program name with args. +set dummy cc; ac_word=$2 +echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 +echo "configure:1291: checking for $ac_word" >&5 +if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then + echo $ac_n "(cached) $ac_c" 1>&6 +else + if test -n "$CC"; then + ac_cv_prog_CC="$CC" # Let the user override the test. +else + IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}:" + ac_prog_rejected=no + for ac_dir in $PATH; do + test -z "$ac_dir" && ac_dir=. + if test -f $ac_dir/$ac_word; then + if test "$ac_dir/$ac_word" = "/usr/ucb/cc"; then + ac_prog_rejected=yes + continue + fi + ac_cv_prog_CC="cc" + break + fi + done + IFS="$ac_save_ifs" +if test $ac_prog_rejected = yes; then + # We found a bogon in the path, so make sure we never use it. + set dummy $ac_cv_prog_CC + shift + if test $# -gt 0; then + # We chose a different compiler from the bogus one. + # However, it has the same basename, so the bogon will be chosen + # first if we set CC to just the basename; use the full file name. + shift + set dummy "$ac_dir/$ac_word" "$@" + shift + ac_cv_prog_CC="$@" + fi +fi +fi +fi +CC="$ac_cv_prog_CC" +if test -n "$CC"; then + echo "$ac_t""$CC" 1>&6 +else + echo "$ac_t""no" 1>&6 +fi + + test -z "$CC" && { echo "configure: error: no acceptable cc found in \$PATH" 1>&2; exit 1; } +fi + +echo $ac_n "checking whether the C compiler ($CC $CFLAGS $LDFLAGS) works""... $ac_c" 1>&6 +echo "configure:1339: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) works" >&5 + +ac_ext=c +# CFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options. +ac_cpp='$CPP $CPPFLAGS' +ac_compile='${CC-cc} -c $CFLAGS $CPPFLAGS conftest.$ac_ext 1>&5' +ac_link='${CC-cc} -o conftest $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5' +cross_compiling=$ac_cv_prog_cc_cross + +cat > conftest.$ac_ext <<EOF +#line 1349 "configure" +#include "confdefs.h" +main(){return(0);} +EOF +if { (eval echo configure:1353: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then + ac_cv_prog_cc_works=yes + # If we can't run a trivial program, we are probably using a cross compiler. + if (./conftest; exit) 2>/dev/null; then + ac_cv_prog_cc_cross=no else - CC_FOR_BUILD=gcc + ac_cv_prog_cc_cross=yes + fi +else + echo "configure: failed program was:" >&5 + cat conftest.$ac_ext >&5 + ac_cv_prog_cc_works=no +fi +rm -fr conftest* + +echo "$ac_t""$ac_cv_prog_cc_works" 1>&6 +if test $ac_cv_prog_cc_works = no; then + { echo "configure: error: installation or configuration problem: C compiler cannot create executables." 1>&2; exit 1; } +fi +echo $ac_n "checking whether the C compiler ($CC $CFLAGS $LDFLAGS) is a cross-compiler""... $ac_c" 1>&6 +echo "configure:1373: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) is a cross-compiler" >&5 +echo "$ac_t""$ac_cv_prog_cc_cross" 1>&6 +cross_compiling=$ac_cv_prog_cc_cross + +echo $ac_n "checking whether we are using GNU C""... $ac_c" 1>&6 +echo "configure:1378: checking whether we are using GNU C" >&5 +if eval "test \"`echo '$''{'ac_cv_prog_gcc'+set}'`\" = set"; then + echo $ac_n "(cached) $ac_c" 1>&6 +else + cat > conftest.c <<EOF +#ifdef __GNUC__ + yes; +#endif +EOF +if { ac_try='${CC-cc} -E conftest.c'; { (eval echo configure:1387: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }; } | egrep yes >/dev/null 2>&1; then + ac_cv_prog_gcc=yes +else + ac_cv_prog_gcc=no +fi +fi + +echo "$ac_t""$ac_cv_prog_gcc" 1>&6 + +if test $ac_cv_prog_gcc = yes; then + GCC=yes + ac_test_CFLAGS="${CFLAGS+set}" + ac_save_CFLAGS="$CFLAGS" + CFLAGS= + echo $ac_n "checking whether ${CC-cc} accepts -g""... $ac_c" 1>&6 +echo "configure:1402: checking whether ${CC-cc} accepts -g" >&5 +if eval "test \"`echo '$''{'ac_cv_prog_cc_g'+set}'`\" = set"; then + echo $ac_n "(cached) $ac_c" 1>&6 +else + echo 'void f(){}' > conftest.c +if test -z "`${CC-cc} -g -c conftest.c 2>&1`"; then + ac_cv_prog_cc_g=yes +else + ac_cv_prog_cc_g=no +fi +rm -f conftest* + +fi + +echo "$ac_t""$ac_cv_prog_cc_g" 1>&6 + if test "$ac_test_CFLAGS" = set; then + CFLAGS="$ac_save_CFLAGS" + elif test $ac_cv_prog_cc_g = yes; then + CFLAGS="-g -O2" + else + CFLAGS="-O2" fi +else + GCC= + test "${CFLAGS+set}" = set || CFLAGS="-g" +fi + + +for ac_prog in 'bison -y' byacc +do +# Extract the first word of "$ac_prog", so it can be a program name with args. +set dummy $ac_prog; ac_word=$2 +echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 +echo "configure:1435: checking for $ac_word" >&5 +if eval "test \"`echo '$''{'ac_cv_prog_YACC'+set}'`\" = set"; then + echo $ac_n "(cached) $ac_c" 1>&6 +else + if test -n "$YACC"; then + ac_cv_prog_YACC="$YACC" # Let the user override the test. +else + IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}:" + for ac_dir in $PATH; do + test -z "$ac_dir" && ac_dir=. + if test -f $ac_dir/$ac_word; then + ac_cv_prog_YACC="$ac_prog" + break + fi + done + IFS="$ac_save_ifs" +fi +fi +YACC="$ac_cv_prog_YACC" +if test -n "$YACC"; then + echo "$ac_t""$YACC" 1>&6 +else + echo "$ac_t""no" 1>&6 fi +test -n "$YACC" && break +done +test -n "$YACC" || YACC="yacc" + +# Extract the first word of "flex", so it can be a program name with args. +set dummy flex; ac_word=$2 +echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 +echo "configure:1467: checking for $ac_word" >&5 +if eval "test \"`echo '$''{'ac_cv_prog_LEX'+set}'`\" = set"; then + echo $ac_n "(cached) $ac_c" 1>&6 +else + if test -n "$LEX"; then + ac_cv_prog_LEX="$LEX" # Let the user override the test. +else + IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}:" + for ac_dir in $PATH; do + test -z "$ac_dir" && ac_dir=. + if test -f $ac_dir/$ac_word; then + ac_cv_prog_LEX="flex" + break + fi + done + IFS="$ac_save_ifs" + test -z "$ac_cv_prog_LEX" && ac_cv_prog_LEX="lex" +fi +fi +LEX="$ac_cv_prog_LEX" +if test -n "$LEX"; then + echo "$ac_t""$LEX" 1>&6 +else + echo "$ac_t""no" 1>&6 +fi + +if test -z "$LEXLIB" +then + case "$LEX" in + flex*) ac_lib=fl ;; + *) ac_lib=l ;; + esac + echo $ac_n "checking for yywrap in -l$ac_lib""... $ac_c" 1>&6 +echo "configure:1500: checking for yywrap in -l$ac_lib" >&5 +ac_lib_var=`echo $ac_lib'_'yywrap | sed 'y%./+-%__p_%'` +if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then + echo $ac_n "(cached) $ac_c" 1>&6 +else + ac_save_LIBS="$LIBS" +LIBS="-l$ac_lib $LIBS" +cat > conftest.$ac_ext <<EOF +#line 1508 "configure" +#include "confdefs.h" +/* Override any gcc2 internal prototype to avoid an error. */ +/* We use char because int might match the return type of a gcc2 + builtin and then its argument prototype would still apply. */ +char yywrap(); + +int main() { +yywrap() +; return 0; } +EOF +if { (eval echo configure:1519: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then + rm -rf conftest* + eval "ac_cv_lib_$ac_lib_var=yes" +else + echo "configure: failed program was:" >&5 + cat conftest.$ac_ext >&5 + rm -rf conftest* + eval "ac_cv_lib_$ac_lib_var=no" +fi +rm -f conftest* +LIBS="$ac_save_LIBS" + +fi +if eval "test \"`echo '$ac_cv_lib_'$ac_lib_var`\" = yes"; then + echo "$ac_t""yes" 1>&6 + LEXLIB="-l$ac_lib" +else + echo "$ac_t""no" 1>&6 +fi + +fi echo $ac_n "checking how to run the C preprocessor""... $ac_c" 1>&6 -echo "configure:1033: checking how to run the C preprocessor" >&5 +echo "configure:1542: checking how to run the C preprocessor" >&5 # On Suns, sometimes $CPP names a directory. if test -n "$CPP" && test -d "$CPP"; then CPP= @@ -1044,13 +1553,13 @@ else # On the NeXT, cc -E runs the code through the compiler's parser, # not just through cpp. cat > conftest.$ac_ext <<EOF -#line 1048 "configure" +#line 1557 "configure" #include "confdefs.h" #include <assert.h> Syntax Error EOF ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out" -{ (eval echo configure:1054: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } +{ (eval echo configure:1563: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } ac_err=`grep -v '^ *+' conftest.out` if test -z "$ac_err"; then : @@ -1061,13 +1570,13 @@ else rm -rf conftest* CPP="${CC-cc} -E -traditional-cpp" cat > conftest.$ac_ext <<EOF -#line 1065 "configure" +#line 1574 "configure" #include "confdefs.h" #include <assert.h> Syntax Error EOF ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out" -{ (eval echo configure:1071: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } +{ (eval echo configure:1580: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } ac_err=`grep -v '^ *+' conftest.out` if test -z "$ac_err"; then : @@ -1089,21 +1598,208 @@ else fi echo "$ac_t""$CPP" 1>&6 +echo $ac_n "checking lex output file root""... $ac_c" 1>&6 +echo "configure:1603: checking lex output file root" >&5 +if eval "test \"`echo '$''{'ac_cv_prog_lex_root'+set}'`\" = set"; then + echo $ac_n "(cached) $ac_c" 1>&6 +else + # The minimal lex program is just a single line: %%. But some broken lexes +# (Solaris, I think it was) want two %% lines, so accommodate them. +echo '%% +%%' | $LEX +if test -f lex.yy.c; then + ac_cv_prog_lex_root=lex.yy +elif test -f lexyy.c; then + ac_cv_prog_lex_root=lexyy +else + { echo "configure: error: cannot find output from $LEX; giving up" 1>&2; exit 1; } +fi +fi + +echo "$ac_t""$ac_cv_prog_lex_root" 1>&6 +LEX_OUTPUT_ROOT=$ac_cv_prog_lex_root + +echo $ac_n "checking whether yytext is a pointer""... $ac_c" 1>&6 +echo "configure:1624: checking whether yytext is a pointer" >&5 +if eval "test \"`echo '$''{'ac_cv_prog_lex_yytext_pointer'+set}'`\" = set"; then + echo $ac_n "(cached) $ac_c" 1>&6 +else + # POSIX says lex can declare yytext either as a pointer or an array; the +# default is implementation-dependent. Figure out which it is, since +# not all implementations provide the %pointer and %array declarations. +ac_cv_prog_lex_yytext_pointer=no +echo 'extern char *yytext;' >>$LEX_OUTPUT_ROOT.c +ac_save_LIBS="$LIBS" +LIBS="$LIBS $LEXLIB" +cat > conftest.$ac_ext <<EOF +#line 1636 "configure" +#include "confdefs.h" +`cat $LEX_OUTPUT_ROOT.c` +int main() { + +; return 0; } +EOF +if { (eval echo configure:1643: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then + rm -rf conftest* + ac_cv_prog_lex_yytext_pointer=yes +else + echo "configure: failed program was:" >&5 + cat conftest.$ac_ext >&5 +fi +rm -f conftest* +LIBS="$ac_save_LIBS" +rm -f "${LEX_OUTPUT_ROOT}.c" + +fi + +echo "$ac_t""$ac_cv_prog_lex_yytext_pointer" 1>&6 +if test $ac_cv_prog_lex_yytext_pointer = yes; then + cat >> confdefs.h <<\EOF +#define YYTEXT_POINTER 1 +EOF + +fi + + +echo $ac_n "checking whether to enable maintainer-specific portions of Makefiles""... $ac_c" 1>&6 +echo "configure:1666: checking whether to enable maintainer-specific portions of Makefiles" >&5 + # Check whether --enable-maintainer-mode or --disable-maintainer-mode was given. +if test "${enable_maintainer_mode+set}" = set; then + enableval="$enable_maintainer_mode" + USE_MAINTAINER_MODE=$enableval +else + USE_MAINTAINER_MODE=no +fi + + echo "$ac_t""$USE_MAINTAINER_MODE" 1>&6 + if test $USE_MAINTAINER_MODE = yes; then + MAINT= + else + MAINT='#M#' + fi + + +echo $ac_n "checking for Cygwin32 environment""... $ac_c" 1>&6 +echo "configure:1684: checking for Cygwin32 environment" >&5 +if eval "test \"`echo '$''{'am_cv_cygwin32'+set}'`\" = set"; then + echo $ac_n "(cached) $ac_c" 1>&6 +else + cat > conftest.$ac_ext <<EOF +#line 1689 "configure" +#include "confdefs.h" + +int main() { +int main () { return __CYGWIN32__; } +; return 0; } +EOF +if { (eval echo configure:1696: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then + rm -rf conftest* + am_cv_cygwin32=yes +else + echo "configure: failed program was:" >&5 + cat conftest.$ac_ext >&5 + rm -rf conftest* + am_cv_cygwin32=no +fi +rm -f conftest* +rm -f conftest* +fi + +echo "$ac_t""$am_cv_cygwin32" 1>&6 +CYGWIN32= +test "$am_cv_cygwin32" = yes && CYGWIN32=yes +echo $ac_n "checking for executable suffix""... $ac_c" 1>&6 +echo "configure:1713: checking for executable suffix" >&5 +if eval "test \"`echo '$''{'am_cv_exeext'+set}'`\" = set"; then + echo $ac_n "(cached) $ac_c" 1>&6 +else + if test "$CYGWIN32" = yes; then +am_cv_exeext=.exe +else +cat > am_c_test.c << 'EOF' +int main() { +/* Nothing needed here */ +} +EOF +${CC-cc} -o am_c_test $CFLAGS $CPPFLAGS $LDFLAGS am_c_test.c $LIBS 1>&5 +am_cv_exeext=`ls am_c_test.* | grep -v am_c_test.c | sed -e s/am_c_test//` +rm -f am_c_test* +fi + +test x"${am_cv_exeext}" = x && am_cv_exeext=no +fi +EXEEXT="" +test x"${am_cv_exeext}" != xno && EXEEXT=${am_cv_exeext} +echo "$ac_t""${am_cv_exeext}" 1>&6 + + +# host-specific stuff: + +HDEFINES= + +. ${srcdir}/../bfd/configure.host + + +AR=${AR-ar} + +# Extract the first word of "ranlib", so it can be a program name with args. +set dummy ranlib; ac_word=$2 +echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 +echo "configure:1749: checking for $ac_word" >&5 +if eval "test \"`echo '$''{'ac_cv_prog_RANLIB'+set}'`\" = set"; then + echo $ac_n "(cached) $ac_c" 1>&6 +else + if test -n "$RANLIB"; then + ac_cv_prog_RANLIB="$RANLIB" # Let the user override the test. +else + IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}:" + for ac_dir in $PATH; do + test -z "$ac_dir" && ac_dir=. + if test -f $ac_dir/$ac_word; then + ac_cv_prog_RANLIB="ranlib" + break + fi + done + IFS="$ac_save_ifs" + test -z "$ac_cv_prog_RANLIB" && ac_cv_prog_RANLIB=":" +fi +fi +RANLIB="$ac_cv_prog_RANLIB" +if test -n "$RANLIB"; then + echo "$ac_t""$RANLIB" 1>&6 +else + echo "$ac_t""no" 1>&6 +fi + + +test -z "$INSTALL_SCRIPT" && INSTALL_SCRIPT='${INSTALL_PROGRAM}' + + +# Put a plausible default for CC_FOR_BUILD in Makefile. +if test -z "$CC_FOR_BUILD"; then + if test "x$cross_compiling" = "xno"; then + CC_FOR_BUILD='$(CC)' + else + CC_FOR_BUILD=gcc + fi +fi + + for ac_hdr in string.h strings.h stdlib.h unistd.h fcntl.h sys/file.h do ac_safe=`echo "$ac_hdr" | sed 'y%./+-%__p_%'` echo $ac_n "checking for $ac_hdr""... $ac_c" 1>&6 -echo "configure:1097: checking for $ac_hdr" >&5 +echo "configure:1793: checking for $ac_hdr" >&5 if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext <<EOF -#line 1102 "configure" +#line 1798 "configure" #include "confdefs.h" #include <$ac_hdr> EOF ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out" -{ (eval echo configure:1107: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } +{ (eval echo configure:1803: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } ac_err=`grep -v '^ *+' conftest.out` if test -z "$ac_err"; then rm -rf conftest* @@ -1130,12 +1826,12 @@ fi done echo $ac_n "checking for sys/wait.h that is POSIX.1 compatible""... $ac_c" 1>&6 -echo "configure:1134: checking for sys/wait.h that is POSIX.1 compatible" >&5 +echo "configure:1830: checking for sys/wait.h that is POSIX.1 compatible" >&5 if eval "test \"`echo '$''{'ac_cv_header_sys_wait_h'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext <<EOF -#line 1139 "configure" +#line 1835 "configure" #include "confdefs.h" #include <sys/types.h> #include <sys/wait.h> @@ -1151,7 +1847,7 @@ wait (&s); s = WIFEXITED (s) ? WEXITSTATUS (s) : 1; ; return 0; } EOF -if { (eval echo configure:1155: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then +if { (eval echo configure:1851: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then rm -rf conftest* ac_cv_header_sys_wait_h=yes else @@ -1174,19 +1870,19 @@ fi # The Ultrix 4.2 mips builtin alloca declared by alloca.h only works # for constant arguments. Useless! echo $ac_n "checking for working alloca.h""... $ac_c" 1>&6 -echo "configure:1178: checking for working alloca.h" >&5 +echo "configure:1874: checking for working alloca.h" >&5 if eval "test \"`echo '$''{'ac_cv_header_alloca_h'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext <<EOF -#line 1183 "configure" +#line 1879 "configure" #include "confdefs.h" #include <alloca.h> int main() { char *p = alloca(2 * sizeof(int)); ; return 0; } EOF -if { (eval echo configure:1190: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then +if { (eval echo configure:1886: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then rm -rf conftest* ac_cv_header_alloca_h=yes else @@ -1207,12 +1903,12 @@ EOF fi echo $ac_n "checking for alloca""... $ac_c" 1>&6 -echo "configure:1211: checking for alloca" >&5 +echo "configure:1907: checking for alloca" >&5 if eval "test \"`echo '$''{'ac_cv_func_alloca_works'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext <<EOF -#line 1216 "configure" +#line 1912 "configure" #include "confdefs.h" #ifdef __GNUC__ @@ -1235,7 +1931,7 @@ int main() { char *p = (char *) alloca(1); ; return 0; } EOF -if { (eval echo configure:1239: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then +if { (eval echo configure:1935: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then rm -rf conftest* ac_cv_func_alloca_works=yes else @@ -1267,12 +1963,12 @@ EOF echo $ac_n "checking whether alloca needs Cray hooks""... $ac_c" 1>&6 -echo "configure:1271: checking whether alloca needs Cray hooks" >&5 +echo "configure:1967: checking whether alloca needs Cray hooks" >&5 if eval "test \"`echo '$''{'ac_cv_os_cray'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext <<EOF -#line 1276 "configure" +#line 1972 "configure" #include "confdefs.h" #if defined(CRAY) && ! defined(CRAY2) webecray @@ -1297,12 +1993,12 @@ echo "$ac_t""$ac_cv_os_cray" 1>&6 if test $ac_cv_os_cray = yes; then for ac_func in _getb67 GETB67 getb67; do echo $ac_n "checking for $ac_func""... $ac_c" 1>&6 -echo "configure:1301: checking for $ac_func" >&5 +echo "configure:1997: checking for $ac_func" >&5 if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext <<EOF -#line 1306 "configure" +#line 2002 "configure" #include "confdefs.h" /* System header to define __stub macros and hopefully few prototypes, which can conflict with char $ac_func(); below. */ @@ -1325,7 +2021,7 @@ $ac_func(); ; return 0; } EOF -if { (eval echo configure:1329: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then +if { (eval echo configure:2025: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then rm -rf conftest* eval "ac_cv_func_$ac_func=yes" else @@ -1352,7 +2048,7 @@ done fi echo $ac_n "checking stack direction for C alloca""... $ac_c" 1>&6 -echo "configure:1356: checking stack direction for C alloca" >&5 +echo "configure:2052: checking stack direction for C alloca" >&5 if eval "test \"`echo '$''{'ac_cv_c_stack_direction'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -1360,7 +2056,7 @@ else ac_cv_c_stack_direction=0 else cat > conftest.$ac_ext <<EOF -#line 1364 "configure" +#line 2060 "configure" #include "confdefs.h" find_stack_direction () { @@ -1379,7 +2075,7 @@ main () exit (find_stack_direction() < 0); } EOF -if { (eval echo configure:1383: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest && (./conftest; exit) 2>/dev/null +if { (eval echo configure:2079: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest && (./conftest; exit) 2>/dev/null then ac_cv_c_stack_direction=1 else @@ -1403,12 +2099,12 @@ fi for ac_func in sbrk utimes do echo $ac_n "checking for $ac_func""... $ac_c" 1>&6 -echo "configure:1407: checking for $ac_func" >&5 +echo "configure:2103: checking for $ac_func" >&5 if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext <<EOF -#line 1412 "configure" +#line 2108 "configure" #include "confdefs.h" /* System header to define __stub macros and hopefully few prototypes, which can conflict with char $ac_func(); below. */ @@ -1431,7 +2127,7 @@ $ac_func(); ; return 0; } EOF -if { (eval echo configure:1435: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then +if { (eval echo configure:2131: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then rm -rf conftest* eval "ac_cv_func_$ac_func=yes" else @@ -1457,12 +2153,12 @@ done if test "x$cross_compiling" = "xno"; then echo $ac_n "checking for ANSI C header files""... $ac_c" 1>&6 -echo "configure:1461: checking for ANSI C header files" >&5 +echo "configure:2157: checking for ANSI C header files" >&5 if eval "test \"`echo '$''{'ac_cv_header_stdc'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext <<EOF -#line 1466 "configure" +#line 2162 "configure" #include "confdefs.h" #include <stdlib.h> #include <stdarg.h> @@ -1470,7 +2166,7 @@ else #include <float.h> EOF ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out" -{ (eval echo configure:1474: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } +{ (eval echo configure:2170: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } ac_err=`grep -v '^ *+' conftest.out` if test -z "$ac_err"; then rm -rf conftest* @@ -1487,7 +2183,7 @@ rm -f conftest* if test $ac_cv_header_stdc = yes; then # SunOS 4.x string.h does not declare mem*, contrary to ANSI. cat > conftest.$ac_ext <<EOF -#line 1491 "configure" +#line 2187 "configure" #include "confdefs.h" #include <string.h> EOF @@ -1505,7 +2201,7 @@ fi if test $ac_cv_header_stdc = yes; then # ISC 2.0.2 stdlib.h does not declare free, contrary to ANSI. cat > conftest.$ac_ext <<EOF -#line 1509 "configure" +#line 2205 "configure" #include "confdefs.h" #include <stdlib.h> EOF @@ -1526,7 +2222,7 @@ if test "$cross_compiling" = yes; then : else cat > conftest.$ac_ext <<EOF -#line 1530 "configure" +#line 2226 "configure" #include "confdefs.h" #include <ctype.h> #define ISLOWER(c) ('a' <= (c) && (c) <= 'z') @@ -1537,7 +2233,7 @@ if (XOR (islower (i), ISLOWER (i)) || toupper (i) != TOUPPER (i)) exit(2); exit (0); } EOF -if { (eval echo configure:1541: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest && (./conftest; exit) 2>/dev/null +if { (eval echo configure:2237: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest && (./conftest; exit) 2>/dev/null then : else @@ -1561,12 +2257,12 @@ EOF fi echo $ac_n "checking for pid_t""... $ac_c" 1>&6 -echo "configure:1565: checking for pid_t" >&5 +echo "configure:2261: checking for pid_t" >&5 if eval "test \"`echo '$''{'ac_cv_type_pid_t'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext <<EOF -#line 1570 "configure" +#line 2266 "configure" #include "confdefs.h" #include <sys/types.h> #if STDC_HEADERS @@ -1595,17 +2291,17 @@ fi ac_safe=`echo "vfork.h" | sed 'y%./+-%__p_%'` echo $ac_n "checking for vfork.h""... $ac_c" 1>&6 -echo "configure:1599: checking for vfork.h" >&5 +echo "configure:2295: checking for vfork.h" >&5 if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext <<EOF -#line 1604 "configure" +#line 2300 "configure" #include "confdefs.h" #include <vfork.h> EOF ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out" -{ (eval echo configure:1609: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } +{ (eval echo configure:2305: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } ac_err=`grep -v '^ *+' conftest.out` if test -z "$ac_err"; then rm -rf conftest* @@ -1630,18 +2326,18 @@ else fi echo $ac_n "checking for working vfork""... $ac_c" 1>&6 -echo "configure:1634: checking for working vfork" >&5 +echo "configure:2330: checking for working vfork" >&5 if eval "test \"`echo '$''{'ac_cv_func_vfork_works'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else if test "$cross_compiling" = yes; then echo $ac_n "checking for vfork""... $ac_c" 1>&6 -echo "configure:1640: checking for vfork" >&5 +echo "configure:2336: checking for vfork" >&5 if eval "test \"`echo '$''{'ac_cv_func_vfork'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext <<EOF -#line 1645 "configure" +#line 2341 "configure" #include "confdefs.h" /* System header to define __stub macros and hopefully few prototypes, which can conflict with char vfork(); below. */ @@ -1664,7 +2360,7 @@ vfork(); ; return 0; } EOF -if { (eval echo configure:1668: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then +if { (eval echo configure:2364: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then rm -rf conftest* eval "ac_cv_func_vfork=yes" else @@ -1685,7 +2381,7 @@ fi else cat > conftest.$ac_ext <<EOF -#line 1689 "configure" +#line 2385 "configure" #include "confdefs.h" /* Thanks to Paul Eggert for this test. */ #include <stdio.h> @@ -1780,7 +2476,7 @@ main() { } } EOF -if { (eval echo configure:1784: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest && (./conftest; exit) 2>/dev/null +if { (eval echo configure:2480: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest && (./conftest; exit) 2>/dev/null then ac_cv_func_vfork_works=yes else @@ -1804,12 +2500,12 @@ fi else echo $ac_n "checking for vfork""... $ac_c" 1>&6 -echo "configure:1808: checking for vfork" >&5 +echo "configure:2504: checking for vfork" >&5 if eval "test \"`echo '$''{'ac_cv_func_vfork'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext <<EOF -#line 1813 "configure" +#line 2509 "configure" #include "confdefs.h" /* System header to define __stub macros and hopefully few prototypes, which can conflict with char vfork(); below. */ @@ -1832,7 +2528,7 @@ vfork(); ; return 0; } EOF -if { (eval echo configure:1836: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then +if { (eval echo configure:2532: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then rm -rf conftest* eval "ac_cv_func_vfork=yes" else @@ -1858,19 +2554,19 @@ fi fi echo $ac_n "checking for time_t in time.h""... $ac_c" 1>&6 -echo "configure:1862: checking for time_t in time.h" >&5 +echo "configure:2558: checking for time_t in time.h" >&5 if eval "test \"`echo '$''{'bu_cv_decl_time_t_time_h'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext <<EOF -#line 1867 "configure" +#line 2563 "configure" #include "confdefs.h" #include <time.h> int main() { time_t i; ; return 0; } EOF -if { (eval echo configure:1874: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then +if { (eval echo configure:2570: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then rm -rf conftest* bu_cv_decl_time_t_time_h=yes else @@ -1891,19 +2587,19 @@ EOF fi echo $ac_n "checking for time_t in sys/types.h""... $ac_c" 1>&6 -echo "configure:1895: checking for time_t in sys/types.h" >&5 +echo "configure:2591: checking for time_t in sys/types.h" >&5 if eval "test \"`echo '$''{'bu_cv_decl_time_t_types_h'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext <<EOF -#line 1900 "configure" +#line 2596 "configure" #include "confdefs.h" #include <sys/types.h> int main() { time_t i; ; return 0; } EOF -if { (eval echo configure:1907: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then +if { (eval echo configure:2603: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then rm -rf conftest* bu_cv_decl_time_t_types_h=yes else @@ -1926,12 +2622,12 @@ fi # Under Next 3.2 <utime.h> apparently does not define struct utimbuf # by default. echo $ac_n "checking for utime.h""... $ac_c" 1>&6 -echo "configure:1930: checking for utime.h" >&5 +echo "configure:2626: checking for utime.h" >&5 if eval "test \"`echo '$''{'bu_cv_header_utime_h'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext <<EOF -#line 1935 "configure" +#line 2631 "configure" #include "confdefs.h" #include <sys/types.h> #ifdef HAVE_TIME_H @@ -1942,7 +2638,7 @@ int main() { struct utimbuf s; ; return 0; } EOF -if { (eval echo configure:1946: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then +if { (eval echo configure:2642: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then rm -rf conftest* bu_cv_header_utime_h=yes else @@ -1963,12 +2659,12 @@ EOF fi echo $ac_n "checking whether fprintf must be declared""... $ac_c" 1>&6 -echo "configure:1967: checking whether fprintf must be declared" >&5 +echo "configure:2663: checking whether fprintf must be declared" >&5 if eval "test \"`echo '$''{'bfd_cv_decl_needed_fprintf'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext <<EOF -#line 1972 "configure" +#line 2668 "configure" #include "confdefs.h" #include <stdio.h> @@ -1989,7 +2685,7 @@ int main() { char *(*pfn) = (char *(*)) fprintf ; return 0; } EOF -if { (eval echo configure:1993: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then +if { (eval echo configure:2689: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then rm -rf conftest* bfd_cv_decl_needed_fprintf=no else @@ -2011,12 +2707,12 @@ EOF fi echo $ac_n "checking whether strstr must be declared""... $ac_c" 1>&6 -echo "configure:2015: checking whether strstr must be declared" >&5 +echo "configure:2711: checking whether strstr must be declared" >&5 if eval "test \"`echo '$''{'bfd_cv_decl_needed_strstr'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext <<EOF -#line 2020 "configure" +#line 2716 "configure" #include "confdefs.h" #include <stdio.h> @@ -2037,7 +2733,7 @@ int main() { char *(*pfn) = (char *(*)) strstr ; return 0; } EOF -if { (eval echo configure:2041: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then +if { (eval echo configure:2737: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then rm -rf conftest* bfd_cv_decl_needed_strstr=no else @@ -2059,12 +2755,12 @@ EOF fi echo $ac_n "checking whether sbrk must be declared""... $ac_c" 1>&6 -echo "configure:2063: checking whether sbrk must be declared" >&5 +echo "configure:2759: checking whether sbrk must be declared" >&5 if eval "test \"`echo '$''{'bfd_cv_decl_needed_sbrk'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext <<EOF -#line 2068 "configure" +#line 2764 "configure" #include "confdefs.h" #include <stdio.h> @@ -2085,7 +2781,7 @@ int main() { char *(*pfn) = (char *(*)) sbrk ; return 0; } EOF -if { (eval echo configure:2089: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then +if { (eval echo configure:2785: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then rm -rf conftest* bfd_cv_decl_needed_sbrk=no else @@ -2107,12 +2803,12 @@ EOF fi echo $ac_n "checking whether getenv must be declared""... $ac_c" 1>&6 -echo "configure:2111: checking whether getenv must be declared" >&5 +echo "configure:2807: checking whether getenv must be declared" >&5 if eval "test \"`echo '$''{'bfd_cv_decl_needed_getenv'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext <<EOF -#line 2116 "configure" +#line 2812 "configure" #include "confdefs.h" #include <stdio.h> @@ -2133,7 +2829,7 @@ int main() { char *(*pfn) = (char *(*)) getenv ; return 0; } EOF -if { (eval echo configure:2137: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then +if { (eval echo configure:2833: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then rm -rf conftest* bfd_cv_decl_needed_getenv=no else @@ -2399,19 +3095,32 @@ s%@build_alias@%$build_alias%g s%@build_cpu@%$build_cpu%g s%@build_vendor@%$build_vendor%g s%@build_os@%$build_os%g +s%@INSTALL_PROGRAM@%$INSTALL_PROGRAM%g +s%@INSTALL_DATA@%$INSTALL_DATA%g +s%@INSTALL_SCRIPT@%$INSTALL_SCRIPT%g +s%@PACKAGE@%$PACKAGE%g +s%@VERSION@%$VERSION%g +s%@ACLOCAL@%$ACLOCAL%g +s%@AUTOCONF@%$AUTOCONF%g +s%@AUTOMAKE@%$AUTOMAKE%g +s%@AUTOHEADER@%$AUTOHEADER%g +s%@MAKEINFO@%$MAKEINFO%g +s%@SET_MAKE@%$SET_MAKE%g s%@CC@%$CC%g +s%@RANLIB@%$RANLIB%g +s%@LD@%$LD%g +s%@LN_S@%$LN_S%g +s%@LIBTOOL@%$LIBTOOL%g +s%@YACC@%$YACC%g +s%@LEX@%$LEX%g +s%@LEXLIB@%$LEXLIB%g +s%@CPP@%$CPP%g +s%@LEX_OUTPUT_ROOT@%$LEX_OUTPUT_ROOT%g +s%@MAINT@%$MAINT%g +s%@EXEEXT@%$EXEEXT%g s%@HDEFINES@%$HDEFINES%g -s%@HLDFLAGS@%$HLDFLAGS%g -s%@HLDENV@%$HLDENV%g -s%@RPATH_ENVVAR@%$RPATH_ENVVAR%g s%@AR@%$AR%g -s%@RANLIB@%$RANLIB%g -s%@INSTALL_PROGRAM@%$INSTALL_PROGRAM%g -s%@INSTALL_DATA@%$INSTALL_DATA%g -s%@BFDLIB@%$BFDLIB%g -s%@OPCODES@%$OPCODES%g s%@CC_FOR_BUILD@%$CC_FOR_BUILD%g -s%@CPP@%$CPP%g s%@ALLOCA@%$ALLOCA%g s%@NLMCONV_DEFS@%$NLMCONV_DEFS%g s%@BUILD_NLMCONV@%$BUILD_NLMCONV%g @@ -2630,9 +3339,11 @@ fi; done EOF cat >> $CONFIG_STATUS <<EOF + EOF cat >> $CONFIG_STATUS <<\EOF -case x$CONFIG_HEADERS in xconfig.h:config.in) echo > stamp-h ;; esac +test -z "$CONFIG_HEADERS" || echo timestamp > stamp-h + exit 0 EOF chmod +x $CONFIG_STATUS diff --git a/binutils/configure.in b/binutils/configure.in index 67fdb06..db82531 100644 --- a/binutils/configure.in +++ b/binutils/configure.in @@ -3,6 +3,12 @@ dnl AC_PREREQ(2.5) AC_INIT(ar.c) +AC_CANONICAL_SYSTEM + +AM_INIT_AUTOMAKE(binutils, 2.8.2) + +AM_PROG_LIBTOOL + AC_ARG_ENABLE(targets, [ --enable-targets alternative target configurations], [case "${enableval}" in @@ -11,17 +17,6 @@ AC_ARG_ENABLE(targets, no) enable_targets= ;; *) enable_targets=$enableval ;; esac])dnl -AC_ARG_ENABLE(shared, -[ --enable-shared build shared BFD library], -[case "${enableval}" in - yes) shared=true shared_bfd=true shared_opcodes=true ;; - no) shared=false ;; - *bfd*opcodes*) shared=true shared_bfd=true shared_opcodes=true ;; - *opcodes*bfd*) shared=true shared_bfd=true shared_opcodes=true ;; - *bfd*) shared=true shared_bfd=true ;; - *opcodes*) shared=true shared_opcodes=true ;; - *) shared=false ;; -esac])dnl AC_ARG_ENABLE(commonbfdlib, [ --enable-commonbfdlib build shared BFD/opcodes/libiberty library], [case "${enableval}" in @@ -30,10 +25,8 @@ AC_ARG_ENABLE(commonbfdlib, *) AC_MSG_ERROR([bad value ${enableval} for BFD commonbfdlib option]) ;; esac])dnl -AC_CONFIG_HEADER(config.h:config.in) +AM_CONFIG_HEADER(config.h:config.in) -AC_CONFIG_AUX_DIR(`cd $srcdir/..; pwd`) -AC_CANONICAL_SYSTEM if test -z "$target" ; then AC_MSG_ERROR(Unrecognized target system type; please check config.sub.) fi @@ -42,73 +35,27 @@ if test -z "$host" ; then fi AC_ARG_PROGRAM +AC_PROG_CC + +AC_PROG_YACC +AC_PROG_LEX +AC_DECL_YYTEXT + +AM_MAINTAINER_MODE +AM_CYGWIN32 +AM_EXEEXT + # host-specific stuff: HDEFINES= -HLDFLAGS= -HLDENV= -RPATH_ENVVAR=LD_LIBRARY_PATH - -AC_PROG_CC . ${srcdir}/../bfd/configure.host AC_SUBST(HDEFINES) -AC_SUBST(HLDFLAGS) -AC_SUBST(HLDENV) -AC_SUBST(RPATH_ENVVAR) AR=${AR-ar} AC_SUBST(AR) AC_PROG_RANLIB -AC_PROG_INSTALL - -# For most hosts we can use a simple definition to pick up the BFD and -# opcodes libraries. However, if we are building shared libraries, we -# need to handle some hosts specially. -BFDLIB='-L../bfd -lbfd' -OPCODES='-L../opcodes -lopcodes' - -case "${host}" in -*-*-sunos*) - # On SunOS, we must link against the name we are going to install, - # not -lbfd, since SunOS does not support SONAME. - if test "${shared_bfd}" = "true"; then - BFDLIB='-L../bfd -l`echo bfd | sed '"'"'$(program_transform_name)'"'"'`' - fi - if test "${shared_opcodes}" = "true"; then - OPCODES='-L../opcodes -l`echo opcodes | sed '"'"'$(program_transform_name)'"'"'`' - fi - ;; -alpha*-*-osf*) - # On Alpha OSF/1, the native linker searches all the -L - # directories for any LIB.so files, and only then searches for any - # LIB.a files. That means that if there is an installed - # libbfd.so, but this build is not done with --enable-shared, the - # link will wind up being against the install libbfd.so rather - # than the newly built libbfd. To avoid this, we must explicitly - # link against libbfd.a when --enable-shared is not used. - if test "${shared_bfd}" != "true"; then - BFDLIB='../bfd/libbfd.a' - fi - if test "${shared_opcodes}" != "true"; then - OPCODES='../opcodes/libopcodes.a' - fi - ;; -esac - -if test "${commonbfdlib}" = "true"; then - # when a shared libbfd is built with --enable-commonbfdlib, - # all of libopcodes is available in libbfd.so. Unfortunately, on - # HP/UX, when using gcc -g, the linker does a static link, so we - # need to continue linking against opcodes on that platform. - case "${host}" in - *-*-hpux*) ;; - *) OPCODES= ;; - esac -fi - -AC_SUBST(BFDLIB) -AC_SUBST(OPCODES) +AM_PROG_INSTALL BFD_CC_FOR_BUILD @@ -258,5 +205,4 @@ else fi AC_SUBST(UNDERSCORE) -AC_OUTPUT(Makefile, -[case x$CONFIG_HEADERS in xconfig.h:config.in) echo > stamp-h ;; esac]) +AC_OUTPUT(Makefile) diff --git a/binutils/stamp-h.in b/binutils/stamp-h.in new file mode 100644 index 0000000..9788f70 --- /dev/null +++ b/binutils/stamp-h.in @@ -0,0 +1 @@ +timestamp |