diff options
| -rw-r--r-- | ChangeLog | 22 | ||||
| -rw-r--r-- | Makefile.in | 25000 | ||||
| -rw-r--r-- | Makefile.tpl | 213 | ||||
| -rwxr-xr-x | configure | 4 | ||||
| -rw-r--r-- | configure.in | 4 |
5 files changed, 12746 insertions, 12497 deletions
@@ -1,3 +1,25 @@ +2004-03-22 Nathanael Nerode <neroden@gcc.gnu.org> + + * Makefile.tpl: Rearrange by moving recursive_targets rules + into their proper sections. + * Makefile.tpl (top level bootstrap support): Move disabling + of coverage flags from 'make' to 'configure'; improve comments. + * Makefile.in: Regenerate. + + * Makefile.tpl (experimental top level bootstrap) Move stage1 + language setting from all- target to configure- target; disable + intermodule optimization in stage 1; prevent gratuitous rebuilds + of stage 1. + * Makefile.in: Regenerate. + * configure.in: Comma-separate stage 1 language list for top + level bootstrap. + * configure: Regenerate. + + * Makefile.tpl: Clean up experimental top level bootstrap support: + note known problems; set CONFIG_SHELL; don't set BUILD_CC; relocate + prev-gcc in configure- targets as well as all- targets. + * Makefile.in: Regenerate. + 2004-03-17 Paolo Bonzini <bonzini@gnu.org> * configure.in: Remove symbolic link section. diff --git a/Makefile.in b/Makefile.in index 5e7cd6f..68f43e6 100644 --- a/Makefile.in +++ b/Makefile.in @@ -798,28 +798,1246 @@ info-target: \ maybe-info-target-rda \ maybe-info-target-libada -# GCC, the eternal special case -.PHONY: maybe-info-gcc info-gcc -maybe-info-gcc: -info-gcc: \ - configure-gcc - @[ -f ./gcc/Makefile ] || exit 0; \ +.PHONY: do-dvi +do-dvi: dvi-host dvi-target + +.PHONY: dvi-host +dvi-host: maybe-dvi-gcc \ + maybe-dvi-ash \ + maybe-dvi-autoconf \ + maybe-dvi-automake \ + maybe-dvi-bash \ + maybe-dvi-bfd \ + maybe-dvi-opcodes \ + maybe-dvi-binutils \ + maybe-dvi-bison \ + maybe-dvi-byacc \ + maybe-dvi-bzip2 \ + maybe-dvi-dejagnu \ + maybe-dvi-diff \ + maybe-dvi-dosutils \ + maybe-dvi-etc \ + maybe-dvi-fastjar \ + maybe-dvi-fileutils \ + maybe-dvi-findutils \ + maybe-dvi-find \ + maybe-dvi-flex \ + maybe-dvi-gas \ + maybe-dvi-gawk \ + maybe-dvi-gettext \ + maybe-dvi-gnuserv \ + maybe-dvi-gprof \ + maybe-dvi-gzip \ + maybe-dvi-hello \ + maybe-dvi-indent \ + maybe-dvi-intl \ + maybe-dvi-tcl \ + maybe-dvi-itcl \ + maybe-dvi-ld \ + maybe-dvi-libgui \ + maybe-dvi-libiberty \ + maybe-dvi-libtool \ + maybe-dvi-m4 \ + maybe-dvi-make \ + maybe-dvi-mmalloc \ + maybe-dvi-patch \ + maybe-dvi-perl \ + maybe-dvi-prms \ + maybe-dvi-rcs \ + maybe-dvi-readline \ + maybe-dvi-release \ + maybe-dvi-recode \ + maybe-dvi-sed \ + maybe-dvi-send-pr \ + maybe-dvi-shellutils \ + maybe-dvi-sid \ + maybe-dvi-sim \ + maybe-dvi-tar \ + maybe-dvi-texinfo \ + maybe-dvi-textutils \ + maybe-dvi-time \ + maybe-dvi-uudecode \ + maybe-dvi-wdiff \ + maybe-dvi-zip \ + maybe-dvi-zlib \ + maybe-dvi-gdb \ + maybe-dvi-expect \ + maybe-dvi-guile \ + maybe-dvi-tk \ + maybe-dvi-tix \ + maybe-dvi-libtermcap \ + maybe-dvi-utils + +.PHONY: dvi-target +dvi-target: \ + maybe-dvi-target-libstdc++-v3 \ + maybe-dvi-target-newlib \ + maybe-dvi-target-libf2c \ + maybe-dvi-target-libobjc \ + maybe-dvi-target-libtermcap \ + maybe-dvi-target-winsup \ + maybe-dvi-target-libgloss \ + maybe-dvi-target-libiberty \ + maybe-dvi-target-gperf \ + maybe-dvi-target-examples \ + maybe-dvi-target-libffi \ + maybe-dvi-target-libjava \ + maybe-dvi-target-zlib \ + maybe-dvi-target-boehm-gc \ + maybe-dvi-target-qthreads \ + maybe-dvi-target-rda \ + maybe-dvi-target-libada + +.PHONY: do-TAGS +do-TAGS: TAGS-host TAGS-target + +.PHONY: TAGS-host +TAGS-host: maybe-TAGS-gcc \ + maybe-TAGS-ash \ + maybe-TAGS-autoconf \ + maybe-TAGS-automake \ + maybe-TAGS-bash \ + maybe-TAGS-bfd \ + maybe-TAGS-opcodes \ + maybe-TAGS-binutils \ + maybe-TAGS-bison \ + maybe-TAGS-byacc \ + maybe-TAGS-bzip2 \ + maybe-TAGS-dejagnu \ + maybe-TAGS-diff \ + maybe-TAGS-dosutils \ + maybe-TAGS-etc \ + maybe-TAGS-fastjar \ + maybe-TAGS-fileutils \ + maybe-TAGS-findutils \ + maybe-TAGS-find \ + maybe-TAGS-flex \ + maybe-TAGS-gas \ + maybe-TAGS-gawk \ + maybe-TAGS-gettext \ + maybe-TAGS-gnuserv \ + maybe-TAGS-gprof \ + maybe-TAGS-gzip \ + maybe-TAGS-hello \ + maybe-TAGS-indent \ + maybe-TAGS-intl \ + maybe-TAGS-tcl \ + maybe-TAGS-itcl \ + maybe-TAGS-ld \ + maybe-TAGS-libgui \ + maybe-TAGS-libiberty \ + maybe-TAGS-libtool \ + maybe-TAGS-m4 \ + maybe-TAGS-make \ + maybe-TAGS-mmalloc \ + maybe-TAGS-patch \ + maybe-TAGS-perl \ + maybe-TAGS-prms \ + maybe-TAGS-rcs \ + maybe-TAGS-readline \ + maybe-TAGS-release \ + maybe-TAGS-recode \ + maybe-TAGS-sed \ + maybe-TAGS-send-pr \ + maybe-TAGS-shellutils \ + maybe-TAGS-sid \ + maybe-TAGS-sim \ + maybe-TAGS-tar \ + maybe-TAGS-texinfo \ + maybe-TAGS-textutils \ + maybe-TAGS-time \ + maybe-TAGS-uudecode \ + maybe-TAGS-wdiff \ + maybe-TAGS-zip \ + maybe-TAGS-zlib \ + maybe-TAGS-gdb \ + maybe-TAGS-expect \ + maybe-TAGS-guile \ + maybe-TAGS-tk \ + maybe-TAGS-tix \ + maybe-TAGS-libtermcap \ + maybe-TAGS-utils + +.PHONY: TAGS-target +TAGS-target: \ + maybe-TAGS-target-libstdc++-v3 \ + maybe-TAGS-target-newlib \ + maybe-TAGS-target-libf2c \ + maybe-TAGS-target-libobjc \ + maybe-TAGS-target-libtermcap \ + maybe-TAGS-target-winsup \ + maybe-TAGS-target-libgloss \ + maybe-TAGS-target-libiberty \ + maybe-TAGS-target-gperf \ + maybe-TAGS-target-examples \ + maybe-TAGS-target-libffi \ + maybe-TAGS-target-libjava \ + maybe-TAGS-target-zlib \ + maybe-TAGS-target-boehm-gc \ + maybe-TAGS-target-qthreads \ + maybe-TAGS-target-rda \ + maybe-TAGS-target-libada + +.PHONY: do-install-info +do-install-info: install-info-host install-info-target + +.PHONY: install-info-host +install-info-host: maybe-install-info-gcc \ + maybe-install-info-ash \ + maybe-install-info-autoconf \ + maybe-install-info-automake \ + maybe-install-info-bash \ + maybe-install-info-bfd \ + maybe-install-info-opcodes \ + maybe-install-info-binutils \ + maybe-install-info-bison \ + maybe-install-info-byacc \ + maybe-install-info-bzip2 \ + maybe-install-info-dejagnu \ + maybe-install-info-diff \ + maybe-install-info-dosutils \ + maybe-install-info-etc \ + maybe-install-info-fastjar \ + maybe-install-info-fileutils \ + maybe-install-info-findutils \ + maybe-install-info-find \ + maybe-install-info-flex \ + maybe-install-info-gas \ + maybe-install-info-gawk \ + maybe-install-info-gettext \ + maybe-install-info-gnuserv \ + maybe-install-info-gprof \ + maybe-install-info-gzip \ + maybe-install-info-hello \ + maybe-install-info-indent \ + maybe-install-info-intl \ + maybe-install-info-tcl \ + maybe-install-info-itcl \ + maybe-install-info-ld \ + maybe-install-info-libgui \ + maybe-install-info-libiberty \ + maybe-install-info-libtool \ + maybe-install-info-m4 \ + maybe-install-info-make \ + maybe-install-info-mmalloc \ + maybe-install-info-patch \ + maybe-install-info-perl \ + maybe-install-info-prms \ + maybe-install-info-rcs \ + maybe-install-info-readline \ + maybe-install-info-release \ + maybe-install-info-recode \ + maybe-install-info-sed \ + maybe-install-info-send-pr \ + maybe-install-info-shellutils \ + maybe-install-info-sid \ + maybe-install-info-sim \ + maybe-install-info-tar \ + maybe-install-info-texinfo \ + maybe-install-info-textutils \ + maybe-install-info-time \ + maybe-install-info-uudecode \ + maybe-install-info-wdiff \ + maybe-install-info-zip \ + maybe-install-info-zlib \ + maybe-install-info-gdb \ + maybe-install-info-expect \ + maybe-install-info-guile \ + maybe-install-info-tk \ + maybe-install-info-tix \ + maybe-install-info-libtermcap \ + maybe-install-info-utils + +.PHONY: install-info-target +install-info-target: \ + maybe-install-info-target-libstdc++-v3 \ + maybe-install-info-target-newlib \ + maybe-install-info-target-libf2c \ + maybe-install-info-target-libobjc \ + maybe-install-info-target-libtermcap \ + maybe-install-info-target-winsup \ + maybe-install-info-target-libgloss \ + maybe-install-info-target-libiberty \ + maybe-install-info-target-gperf \ + maybe-install-info-target-examples \ + maybe-install-info-target-libffi \ + maybe-install-info-target-libjava \ + maybe-install-info-target-zlib \ + maybe-install-info-target-boehm-gc \ + maybe-install-info-target-qthreads \ + maybe-install-info-target-rda \ + maybe-install-info-target-libada + +.PHONY: do-installcheck +do-installcheck: installcheck-host installcheck-target + +.PHONY: installcheck-host +installcheck-host: maybe-installcheck-gcc \ + maybe-installcheck-ash \ + maybe-installcheck-autoconf \ + maybe-installcheck-automake \ + maybe-installcheck-bash \ + maybe-installcheck-bfd \ + maybe-installcheck-opcodes \ + maybe-installcheck-binutils \ + maybe-installcheck-bison \ + maybe-installcheck-byacc \ + maybe-installcheck-bzip2 \ + maybe-installcheck-dejagnu \ + maybe-installcheck-diff \ + maybe-installcheck-dosutils \ + maybe-installcheck-etc \ + maybe-installcheck-fastjar \ + maybe-installcheck-fileutils \ + maybe-installcheck-findutils \ + maybe-installcheck-find \ + maybe-installcheck-flex \ + maybe-installcheck-gas \ + maybe-installcheck-gawk \ + maybe-installcheck-gettext \ + maybe-installcheck-gnuserv \ + maybe-installcheck-gprof \ + maybe-installcheck-gzip \ + maybe-installcheck-hello \ + maybe-installcheck-indent \ + maybe-installcheck-intl \ + maybe-installcheck-tcl \ + maybe-installcheck-itcl \ + maybe-installcheck-ld \ + maybe-installcheck-libgui \ + maybe-installcheck-libiberty \ + maybe-installcheck-libtool \ + maybe-installcheck-m4 \ + maybe-installcheck-make \ + maybe-installcheck-mmalloc \ + maybe-installcheck-patch \ + maybe-installcheck-perl \ + maybe-installcheck-prms \ + maybe-installcheck-rcs \ + maybe-installcheck-readline \ + maybe-installcheck-release \ + maybe-installcheck-recode \ + maybe-installcheck-sed \ + maybe-installcheck-send-pr \ + maybe-installcheck-shellutils \ + maybe-installcheck-sid \ + maybe-installcheck-sim \ + maybe-installcheck-tar \ + maybe-installcheck-texinfo \ + maybe-installcheck-textutils \ + maybe-installcheck-time \ + maybe-installcheck-uudecode \ + maybe-installcheck-wdiff \ + maybe-installcheck-zip \ + maybe-installcheck-zlib \ + maybe-installcheck-gdb \ + maybe-installcheck-expect \ + maybe-installcheck-guile \ + maybe-installcheck-tk \ + maybe-installcheck-tix \ + maybe-installcheck-libtermcap \ + maybe-installcheck-utils + +.PHONY: installcheck-target +installcheck-target: \ + maybe-installcheck-target-libstdc++-v3 \ + maybe-installcheck-target-newlib \ + maybe-installcheck-target-libf2c \ + maybe-installcheck-target-libobjc \ + maybe-installcheck-target-libtermcap \ + maybe-installcheck-target-winsup \ + maybe-installcheck-target-libgloss \ + maybe-installcheck-target-libiberty \ + maybe-installcheck-target-gperf \ + maybe-installcheck-target-examples \ + maybe-installcheck-target-libffi \ + maybe-installcheck-target-libjava \ + maybe-installcheck-target-zlib \ + maybe-installcheck-target-boehm-gc \ + maybe-installcheck-target-qthreads \ + maybe-installcheck-target-rda \ + maybe-installcheck-target-libada + +.PHONY: do-mostlyclean +do-mostlyclean: mostlyclean-host mostlyclean-target + +.PHONY: mostlyclean-host +mostlyclean-host: maybe-mostlyclean-gcc \ + maybe-mostlyclean-ash \ + maybe-mostlyclean-autoconf \ + maybe-mostlyclean-automake \ + maybe-mostlyclean-bash \ + maybe-mostlyclean-bfd \ + maybe-mostlyclean-opcodes \ + maybe-mostlyclean-binutils \ + maybe-mostlyclean-bison \ + maybe-mostlyclean-byacc \ + maybe-mostlyclean-bzip2 \ + maybe-mostlyclean-dejagnu \ + maybe-mostlyclean-diff \ + maybe-mostlyclean-dosutils \ + maybe-mostlyclean-etc \ + maybe-mostlyclean-fastjar \ + maybe-mostlyclean-fileutils \ + maybe-mostlyclean-findutils \ + maybe-mostlyclean-find \ + maybe-mostlyclean-flex \ + maybe-mostlyclean-gas \ + maybe-mostlyclean-gawk \ + maybe-mostlyclean-gettext \ + maybe-mostlyclean-gnuserv \ + maybe-mostlyclean-gprof \ + maybe-mostlyclean-gzip \ + maybe-mostlyclean-hello \ + maybe-mostlyclean-indent \ + maybe-mostlyclean-intl \ + maybe-mostlyclean-tcl \ + maybe-mostlyclean-itcl \ + maybe-mostlyclean-ld \ + maybe-mostlyclean-libgui \ + maybe-mostlyclean-libiberty \ + maybe-mostlyclean-libtool \ + maybe-mostlyclean-m4 \ + maybe-mostlyclean-make \ + maybe-mostlyclean-mmalloc \ + maybe-mostlyclean-patch \ + maybe-mostlyclean-perl \ + maybe-mostlyclean-prms \ + maybe-mostlyclean-rcs \ + maybe-mostlyclean-readline \ + maybe-mostlyclean-release \ + maybe-mostlyclean-recode \ + maybe-mostlyclean-sed \ + maybe-mostlyclean-send-pr \ + maybe-mostlyclean-shellutils \ + maybe-mostlyclean-sid \ + maybe-mostlyclean-sim \ + maybe-mostlyclean-tar \ + maybe-mostlyclean-texinfo \ + maybe-mostlyclean-textutils \ + maybe-mostlyclean-time \ + maybe-mostlyclean-uudecode \ + maybe-mostlyclean-wdiff \ + maybe-mostlyclean-zip \ + maybe-mostlyclean-zlib \ + maybe-mostlyclean-gdb \ + maybe-mostlyclean-expect \ + maybe-mostlyclean-guile \ + maybe-mostlyclean-tk \ + maybe-mostlyclean-tix \ + maybe-mostlyclean-libtermcap \ + maybe-mostlyclean-utils + +.PHONY: mostlyclean-target +mostlyclean-target: \ + maybe-mostlyclean-target-libstdc++-v3 \ + maybe-mostlyclean-target-newlib \ + maybe-mostlyclean-target-libf2c \ + maybe-mostlyclean-target-libobjc \ + maybe-mostlyclean-target-libtermcap \ + maybe-mostlyclean-target-winsup \ + maybe-mostlyclean-target-libgloss \ + maybe-mostlyclean-target-libiberty \ + maybe-mostlyclean-target-gperf \ + maybe-mostlyclean-target-examples \ + maybe-mostlyclean-target-libffi \ + maybe-mostlyclean-target-libjava \ + maybe-mostlyclean-target-zlib \ + maybe-mostlyclean-target-boehm-gc \ + maybe-mostlyclean-target-qthreads \ + maybe-mostlyclean-target-rda \ + maybe-mostlyclean-target-libada + +.PHONY: do-clean +do-clean: clean-host clean-target + +.PHONY: clean-host +clean-host: maybe-clean-gcc \ + maybe-clean-ash \ + maybe-clean-autoconf \ + maybe-clean-automake \ + maybe-clean-bash \ + maybe-clean-bfd \ + maybe-clean-opcodes \ + maybe-clean-binutils \ + maybe-clean-bison \ + maybe-clean-byacc \ + maybe-clean-bzip2 \ + maybe-clean-dejagnu \ + maybe-clean-diff \ + maybe-clean-dosutils \ + maybe-clean-etc \ + maybe-clean-fastjar \ + maybe-clean-fileutils \ + maybe-clean-findutils \ + maybe-clean-find \ + maybe-clean-flex \ + maybe-clean-gas \ + maybe-clean-gawk \ + maybe-clean-gettext \ + maybe-clean-gnuserv \ + maybe-clean-gprof \ + maybe-clean-gzip \ + maybe-clean-hello \ + maybe-clean-indent \ + maybe-clean-intl \ + maybe-clean-tcl \ + maybe-clean-itcl \ + maybe-clean-ld \ + maybe-clean-libgui \ + maybe-clean-libiberty \ + maybe-clean-libtool \ + maybe-clean-m4 \ + maybe-clean-make \ + maybe-clean-mmalloc \ + maybe-clean-patch \ + maybe-clean-perl \ + maybe-clean-prms \ + maybe-clean-rcs \ + maybe-clean-readline \ + maybe-clean-release \ + maybe-clean-recode \ + maybe-clean-sed \ + maybe-clean-send-pr \ + maybe-clean-shellutils \ + maybe-clean-sid \ + maybe-clean-sim \ + maybe-clean-tar \ + maybe-clean-texinfo \ + maybe-clean-textutils \ + maybe-clean-time \ + maybe-clean-uudecode \ + maybe-clean-wdiff \ + maybe-clean-zip \ + maybe-clean-zlib \ + maybe-clean-gdb \ + maybe-clean-expect \ + maybe-clean-guile \ + maybe-clean-tk \ + maybe-clean-tix \ + maybe-clean-libtermcap \ + maybe-clean-utils + +.PHONY: clean-target +clean-target: \ + maybe-clean-target-libstdc++-v3 \ + maybe-clean-target-newlib \ + maybe-clean-target-libf2c \ + maybe-clean-target-libobjc \ + maybe-clean-target-libtermcap \ + maybe-clean-target-winsup \ + maybe-clean-target-libgloss \ + maybe-clean-target-libiberty \ + maybe-clean-target-gperf \ + maybe-clean-target-examples \ + maybe-clean-target-libffi \ + maybe-clean-target-libjava \ + maybe-clean-target-zlib \ + maybe-clean-target-boehm-gc \ + maybe-clean-target-qthreads \ + maybe-clean-target-rda \ + maybe-clean-target-libada + +.PHONY: do-distclean +do-distclean: distclean-host distclean-target + +.PHONY: distclean-host +distclean-host: maybe-distclean-gcc \ + maybe-distclean-ash \ + maybe-distclean-autoconf \ + maybe-distclean-automake \ + maybe-distclean-bash \ + maybe-distclean-bfd \ + maybe-distclean-opcodes \ + maybe-distclean-binutils \ + maybe-distclean-bison \ + maybe-distclean-byacc \ + maybe-distclean-bzip2 \ + maybe-distclean-dejagnu \ + maybe-distclean-diff \ + maybe-distclean-dosutils \ + maybe-distclean-etc \ + maybe-distclean-fastjar \ + maybe-distclean-fileutils \ + maybe-distclean-findutils \ + maybe-distclean-find \ + maybe-distclean-flex \ + maybe-distclean-gas \ + maybe-distclean-gawk \ + maybe-distclean-gettext \ + maybe-distclean-gnuserv \ + maybe-distclean-gprof \ + maybe-distclean-gzip \ + maybe-distclean-hello \ + maybe-distclean-indent \ + maybe-distclean-intl \ + maybe-distclean-tcl \ + maybe-distclean-itcl \ + maybe-distclean-ld \ + maybe-distclean-libgui \ + maybe-distclean-libiberty \ + maybe-distclean-libtool \ + maybe-distclean-m4 \ + maybe-distclean-make \ + maybe-distclean-mmalloc \ + maybe-distclean-patch \ + maybe-distclean-perl \ + maybe-distclean-prms \ + maybe-distclean-rcs \ + maybe-distclean-readline \ + maybe-distclean-release \ + maybe-distclean-recode \ + maybe-distclean-sed \ + maybe-distclean-send-pr \ + maybe-distclean-shellutils \ + maybe-distclean-sid \ + maybe-distclean-sim \ + maybe-distclean-tar \ + maybe-distclean-texinfo \ + maybe-distclean-textutils \ + maybe-distclean-time \ + maybe-distclean-uudecode \ + maybe-distclean-wdiff \ + maybe-distclean-zip \ + maybe-distclean-zlib \ + maybe-distclean-gdb \ + maybe-distclean-expect \ + maybe-distclean-guile \ + maybe-distclean-tk \ + maybe-distclean-tix \ + maybe-distclean-libtermcap \ + maybe-distclean-utils + +.PHONY: distclean-target +distclean-target: \ + maybe-distclean-target-libstdc++-v3 \ + maybe-distclean-target-newlib \ + maybe-distclean-target-libf2c \ + maybe-distclean-target-libobjc \ + maybe-distclean-target-libtermcap \ + maybe-distclean-target-winsup \ + maybe-distclean-target-libgloss \ + maybe-distclean-target-libiberty \ + maybe-distclean-target-gperf \ + maybe-distclean-target-examples \ + maybe-distclean-target-libffi \ + maybe-distclean-target-libjava \ + maybe-distclean-target-zlib \ + maybe-distclean-target-boehm-gc \ + maybe-distclean-target-qthreads \ + maybe-distclean-target-rda \ + maybe-distclean-target-libada + +.PHONY: do-maintainer-clean +do-maintainer-clean: maintainer-clean-host maintainer-clean-target + +.PHONY: maintainer-clean-host +maintainer-clean-host: maybe-maintainer-clean-gcc \ + maybe-maintainer-clean-ash \ + maybe-maintainer-clean-autoconf \ + maybe-maintainer-clean-automake \ + maybe-maintainer-clean-bash \ + maybe-maintainer-clean-bfd \ + maybe-maintainer-clean-opcodes \ + maybe-maintainer-clean-binutils \ + maybe-maintainer-clean-bison \ + maybe-maintainer-clean-byacc \ + maybe-maintainer-clean-bzip2 \ + maybe-maintainer-clean-dejagnu \ + maybe-maintainer-clean-diff \ + maybe-maintainer-clean-dosutils \ + maybe-maintainer-clean-etc \ + maybe-maintainer-clean-fastjar \ + maybe-maintainer-clean-fileutils \ + maybe-maintainer-clean-findutils \ + maybe-maintainer-clean-find \ + maybe-maintainer-clean-flex \ + maybe-maintainer-clean-gas \ + maybe-maintainer-clean-gawk \ + maybe-maintainer-clean-gettext \ + maybe-maintainer-clean-gnuserv \ + maybe-maintainer-clean-gprof \ + maybe-maintainer-clean-gzip \ + maybe-maintainer-clean-hello \ + maybe-maintainer-clean-indent \ + maybe-maintainer-clean-intl \ + maybe-maintainer-clean-tcl \ + maybe-maintainer-clean-itcl \ + maybe-maintainer-clean-ld \ + maybe-maintainer-clean-libgui \ + maybe-maintainer-clean-libiberty \ + maybe-maintainer-clean-libtool \ + maybe-maintainer-clean-m4 \ + maybe-maintainer-clean-make \ + maybe-maintainer-clean-mmalloc \ + maybe-maintainer-clean-patch \ + maybe-maintainer-clean-perl \ + maybe-maintainer-clean-prms \ + maybe-maintainer-clean-rcs \ + maybe-maintainer-clean-readline \ + maybe-maintainer-clean-release \ + maybe-maintainer-clean-recode \ + maybe-maintainer-clean-sed \ + maybe-maintainer-clean-send-pr \ + maybe-maintainer-clean-shellutils \ + maybe-maintainer-clean-sid \ + maybe-maintainer-clean-sim \ + maybe-maintainer-clean-tar \ + maybe-maintainer-clean-texinfo \ + maybe-maintainer-clean-textutils \ + maybe-maintainer-clean-time \ + maybe-maintainer-clean-uudecode \ + maybe-maintainer-clean-wdiff \ + maybe-maintainer-clean-zip \ + maybe-maintainer-clean-zlib \ + maybe-maintainer-clean-gdb \ + maybe-maintainer-clean-expect \ + maybe-maintainer-clean-guile \ + maybe-maintainer-clean-tk \ + maybe-maintainer-clean-tix \ + maybe-maintainer-clean-libtermcap \ + maybe-maintainer-clean-utils + +.PHONY: maintainer-clean-target +maintainer-clean-target: \ + maybe-maintainer-clean-target-libstdc++-v3 \ + maybe-maintainer-clean-target-newlib \ + maybe-maintainer-clean-target-libf2c \ + maybe-maintainer-clean-target-libobjc \ + maybe-maintainer-clean-target-libtermcap \ + maybe-maintainer-clean-target-winsup \ + maybe-maintainer-clean-target-libgloss \ + maybe-maintainer-clean-target-libiberty \ + maybe-maintainer-clean-target-gperf \ + maybe-maintainer-clean-target-examples \ + maybe-maintainer-clean-target-libffi \ + maybe-maintainer-clean-target-libjava \ + maybe-maintainer-clean-target-zlib \ + maybe-maintainer-clean-target-boehm-gc \ + maybe-maintainer-clean-target-qthreads \ + maybe-maintainer-clean-target-rda \ + maybe-maintainer-clean-target-libada + + +# Here are the targets which correspond to the do-X targets. + +.PHONY: info installcheck dvi install-info +.PHONY: clean distclean mostlyclean maintainer-clean realclean +.PHONY: local-clean local-distclean local-maintainer-clean +info: do-info +installcheck: do-installcheck +dvi: do-dvi + +# Make sure makeinfo is built before we do a `make info', if we're +# in fact building texinfo. +do-info: maybe-all-texinfo + +install-info: do-install-info dir.info + s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ + if [ -f dir.info ] ; then \ + $(INSTALL_DATA) dir.info $(DESTDIR)$(infodir)/dir.info ; \ + else true ; fi + +local-clean: + -rm -f *.a TEMP errs core *.o *~ \#* TAGS *.E *.log + +local-distclean: + -rm -f Makefile config.status config.cache mh-frag mt-frag + -rm -f multilib.out multilib.tmp maybedep.tmp serdep.tmp + -if [ "$(TARGET_SUBDIR)" != "." ]; then \ + rm -rf $(TARGET_SUBDIR); \ + else true; fi + -rm -rf $(BUILD_SUBDIR) + -rm -f texinfo/po/Makefile texinfo/po/Makefile.in texinfo/info/Makefile + -rm -f texinfo/doc/Makefile texinfo/po/POTFILES + -rmdir texinfo/doc texinfo/info texinfo/intl texinfo/lib 2>/dev/null + -rmdir texinfo/makeinfo texinfo/po texinfo/util 2>/dev/null + -rmdir fastjar gcc libiberty texinfo zlib 2>/dev/null + +local-maintainer-clean: + @echo "This command is intended for maintainers to use;" + @echo "it deletes files that may require special tools to rebuild." + +clean: do-clean local-clean +mostlyclean: do-mostlyclean local-clean +distclean: do-distclean local-clean local-distclean +maintainer-clean: local-maintainer-clean do-maintainer-clean local-clean +maintainer-clean: local-distclean +realclean: maintainer-clean + +# Extra dependency for clean-target, owing to the mixed nature of gcc +clean-target: clean-target-libgcc +clean-target-libgcc: + test ! -d gcc/libgcc || \ + (cd gcc/libgcc && find . -type d -print) | \ + while read d; do rm -f gcc/$$d/libgcc.a || : ; done + -rm -rf gcc/libgcc + +# Check target. + +.PHONY: check do-check +check: do-check + +# Only include modules actually being configured and built. +do-check: maybe-check-gcc \ + maybe-check-ash \ + maybe-check-autoconf \ + maybe-check-automake \ + maybe-check-bash \ + maybe-check-bfd \ + maybe-check-opcodes \ + maybe-check-binutils \ + maybe-check-bison \ + maybe-check-byacc \ + maybe-check-bzip2 \ + maybe-check-dejagnu \ + maybe-check-diff \ + maybe-check-dosutils \ + maybe-check-etc \ + maybe-check-fastjar \ + maybe-check-fileutils \ + maybe-check-findutils \ + maybe-check-find \ + maybe-check-flex \ + maybe-check-gas \ + maybe-check-gawk \ + maybe-check-gettext \ + maybe-check-gnuserv \ + maybe-check-gprof \ + maybe-check-gzip \ + maybe-check-hello \ + maybe-check-indent \ + maybe-check-intl \ + maybe-check-tcl \ + maybe-check-itcl \ + maybe-check-ld \ + maybe-check-libgui \ + maybe-check-libiberty \ + maybe-check-libtool \ + maybe-check-m4 \ + maybe-check-make \ + maybe-check-mmalloc \ + maybe-check-patch \ + maybe-check-perl \ + maybe-check-prms \ + maybe-check-rcs \ + maybe-check-readline \ + maybe-check-release \ + maybe-check-recode \ + maybe-check-sed \ + maybe-check-send-pr \ + maybe-check-shellutils \ + maybe-check-sid \ + maybe-check-sim \ + maybe-check-tar \ + maybe-check-texinfo \ + maybe-check-textutils \ + maybe-check-time \ + maybe-check-uudecode \ + maybe-check-wdiff \ + maybe-check-zip \ + maybe-check-zlib \ + maybe-check-gdb \ + maybe-check-expect \ + maybe-check-guile \ + maybe-check-tk \ + maybe-check-tix \ + maybe-check-libtermcap \ + maybe-check-utils \ + maybe-check-target-libstdc++-v3 \ + maybe-check-target-newlib \ + maybe-check-target-libf2c \ + maybe-check-target-libobjc \ + maybe-check-target-libtermcap \ + maybe-check-target-winsup \ + maybe-check-target-libgloss \ + maybe-check-target-libiberty \ + maybe-check-target-gperf \ + maybe-check-target-examples \ + maybe-check-target-libffi \ + maybe-check-target-libjava \ + maybe-check-target-zlib \ + maybe-check-target-boehm-gc \ + maybe-check-target-qthreads \ + maybe-check-target-rda \ + maybe-check-target-libada + +# Automated reporting of test results. + +warning.log: build.log + $(srcdir)/contrib/warn_summary build.log > $@ + +mail-report.log: + if test x'$(BOOT_CFLAGS)' != x''; then \ + BOOT_CFLAGS='$(BOOT_CFLAGS)'; export BOOT_CFLAGS; \ + fi; \ + $(srcdir)/contrib/test_summary -t >$@ + chmod +x $@ + echo If you really want to send e-mail, run ./$@ now + +mail-report-with-warnings.log: warning.log + if test x'$(BOOT_CFLAGS)' != x''; then \ + BOOT_CFLAGS='$(BOOT_CFLAGS)'; export BOOT_CFLAGS; \ + fi; \ + $(srcdir)/contrib/test_summary -t -i warning.log >$@ + chmod +x $@ + echo If you really want to send e-mail, run ./$@ now + +# Installation targets. + +.PHONY: install uninstall +install: installdirs install-host install-target + +.PHONY: install-host-nogcc +install-host-nogcc: \ + maybe-install-ash \ + maybe-install-autoconf \ + maybe-install-automake \ + maybe-install-bash \ + maybe-install-bfd \ + maybe-install-opcodes \ + maybe-install-binutils \ + maybe-install-bison \ + maybe-install-byacc \ + maybe-install-bzip2 \ + maybe-install-dejagnu \ + maybe-install-diff \ + maybe-install-dosutils \ + maybe-install-etc \ + maybe-install-fastjar \ + maybe-install-fileutils \ + maybe-install-findutils \ + maybe-install-find \ + maybe-install-flex \ + maybe-install-gas \ + maybe-install-gawk \ + maybe-install-gettext \ + maybe-install-gnuserv \ + maybe-install-gprof \ + maybe-install-gzip \ + maybe-install-hello \ + maybe-install-indent \ + maybe-install-intl \ + maybe-install-tcl \ + maybe-install-itcl \ + maybe-install-ld \ + maybe-install-libgui \ + maybe-install-libiberty \ + maybe-install-libtool \ + maybe-install-m4 \ + maybe-install-make \ + maybe-install-mmalloc \ + maybe-install-patch \ + maybe-install-perl \ + maybe-install-prms \ + maybe-install-rcs \ + maybe-install-readline \ + maybe-install-release \ + maybe-install-recode \ + maybe-install-sed \ + maybe-install-send-pr \ + maybe-install-shellutils \ + maybe-install-sid \ + maybe-install-sim \ + maybe-install-tar \ + maybe-install-texinfo \ + maybe-install-textutils \ + maybe-install-time \ + maybe-install-uudecode \ + maybe-install-wdiff \ + maybe-install-zip \ + maybe-install-zlib \ + maybe-install-gdb \ + maybe-install-expect \ + maybe-install-guile \ + maybe-install-tk \ + maybe-install-tix \ + maybe-install-libtermcap \ + maybe-install-utils + +.PHONY: install-host +install-host: maybe-install-gcc \ + maybe-install-ash \ + maybe-install-autoconf \ + maybe-install-automake \ + maybe-install-bash \ + maybe-install-bfd \ + maybe-install-opcodes \ + maybe-install-binutils \ + maybe-install-bison \ + maybe-install-byacc \ + maybe-install-bzip2 \ + maybe-install-dejagnu \ + maybe-install-diff \ + maybe-install-dosutils \ + maybe-install-etc \ + maybe-install-fastjar \ + maybe-install-fileutils \ + maybe-install-findutils \ + maybe-install-find \ + maybe-install-flex \ + maybe-install-gas \ + maybe-install-gawk \ + maybe-install-gettext \ + maybe-install-gnuserv \ + maybe-install-gprof \ + maybe-install-gzip \ + maybe-install-hello \ + maybe-install-indent \ + maybe-install-intl \ + maybe-install-tcl \ + maybe-install-itcl \ + maybe-install-ld \ + maybe-install-libgui \ + maybe-install-libiberty \ + maybe-install-libtool \ + maybe-install-m4 \ + maybe-install-make \ + maybe-install-mmalloc \ + maybe-install-patch \ + maybe-install-perl \ + maybe-install-prms \ + maybe-install-rcs \ + maybe-install-readline \ + maybe-install-release \ + maybe-install-recode \ + maybe-install-sed \ + maybe-install-send-pr \ + maybe-install-shellutils \ + maybe-install-sid \ + maybe-install-sim \ + maybe-install-tar \ + maybe-install-texinfo \ + maybe-install-textutils \ + maybe-install-time \ + maybe-install-uudecode \ + maybe-install-wdiff \ + maybe-install-zip \ + maybe-install-zlib \ + maybe-install-gdb \ + maybe-install-expect \ + maybe-install-guile \ + maybe-install-tk \ + maybe-install-tix \ + maybe-install-libtermcap \ + maybe-install-utils + +.PHONY: install-target +install-target: \ + maybe-install-target-libstdc++-v3 \ + maybe-install-target-newlib \ + maybe-install-target-libf2c \ + maybe-install-target-libobjc \ + maybe-install-target-libtermcap \ + maybe-install-target-winsup \ + maybe-install-target-libgloss \ + maybe-install-target-libiberty \ + maybe-install-target-gperf \ + maybe-install-target-examples \ + maybe-install-target-libffi \ + maybe-install-target-libjava \ + maybe-install-target-zlib \ + maybe-install-target-boehm-gc \ + maybe-install-target-qthreads \ + maybe-install-target-rda \ + maybe-install-target-libada + +uninstall: + @echo "the uninstall target is not supported in this tree" + +.PHONY: install.all +install.all: install-no-fixedincludes + @if [ -f ./gcc/Makefile ] ; then \ + r=`${PWD_COMMAND}` ; export r ; \ + $(SET_LIB_PATH) \ + (cd ./gcc && \ + $(MAKE) $(FLAGS_TO_PASS) install-headers) ; \ + else \ + true ; \ + fi + +# install-no-fixedincludes is used because Cygnus can not distribute +# the fixed header files. +.PHONY: install-no-fixedincludes +install-no-fixedincludes: installdirs install-host-nogcc \ + install-target gcc-no-fixedincludes + +### other supporting targets + +MAKEDIRS= \ + $(DESTDIR)$(prefix) \ + $(DESTDIR)$(exec_prefix) +.PHONY: installdirs +installdirs: mkinstalldirs + $(SHELL) $(srcdir)/mkinstalldirs $(MAKEDIRS) + +dir.info: do-install-info + if [ -f $(srcdir)/texinfo/gen-info-dir ] ; then \ + $(srcdir)/texinfo/gen-info-dir $(DESTDIR)$(infodir) $(srcdir)/texinfo/dir.info-template > dir.info.new ; \ + mv -f dir.info.new dir.info ; \ + else true ; \ + fi + +dist: + @echo "Building a full distribution of this tree isn't done" + @echo "via 'make dist'. Check out the etc/ subdirectory" + +etags tags: TAGS + +# Right now this just builds TAGS in each subdirectory. emacs19 has the +# ability to use several tags files at once, so there is probably no need +# to combine them into one big TAGS file (like CVS 1.3 does). We could +# (if we felt like it) have this Makefile write a piece of elisp which +# the user could load to tell emacs19 where all the TAGS files we just +# built are. +TAGS: do-TAGS + +# -------------------------------------- +# Modules which run on the build machine +# -------------------------------------- + +.PHONY: configure-build-libiberty maybe-configure-build-libiberty +maybe-configure-build-libiberty: +configure-build-libiberty: + @test ! -f $(BUILD_SUBDIR)/libiberty/Makefile || exit 0; \ + $(SHELL) $(srcdir)/mkinstalldirs $(BUILD_SUBDIR)/libiberty ; \ r=`${PWD_COMMAND}`; export r; \ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ - $(SET_LIB_PATH) \ - for flag in $(EXTRA_GCC_FLAGS); do \ - eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \ - done; \ - echo "Doing info in gcc" ; \ - (cd gcc && \ - $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \ - "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \ - "RANLIB=$${RANLIB}" \ - "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" \ - info) \ + AR="$(AR_FOR_BUILD)"; export AR; \ + AS="$(AS_FOR_BUILD)"; export AS; \ + CC="$(CC_FOR_BUILD)"; export CC; \ + CFLAGS="$(CFLAGS_FOR_BUILD)"; export CFLAGS; \ + CONFIG_SHELL="$(SHELL)"; export CONFIG_SHELL; \ + CXX="$(CXX_FOR_BUILD)"; export CXX; \ + CXXFLAGS="$(CXXFLAGS_FOR_BUILD)"; export CXXFLAGS; \ + GCJ="$(GCJ_FOR_BUILD)"; export GCJ; \ + DLLTOOL="$(DLLTOOL_FOR_BUILD)"; export DLLTOOL; \ + LD="$(LD_FOR_BUILD)"; export LD; \ + LDFLAGS="$(LDFLAGS_FOR_BUILD)"; export LDFLAGS; \ + NM="$(NM_FOR_BUILD)"; export NM; \ + RANLIB="$(RANLIB_FOR_BUILD)"; export RANLIB; \ + WINDRES="$(WINDRES_FOR_BUILD)"; export WINDRES; \ + echo Configuring in $(BUILD_SUBDIR)/libiberty; \ + cd "$(BUILD_SUBDIR)/libiberty" || exit 1; \ + case $(srcdir) in \ + /* | [A-Za-z]:[\\/]*) \ + topdir=$(srcdir) ;; \ + *) \ + case "$(BUILD_SUBDIR)" in \ + .) topdir="../$(srcdir)" ;; \ + *) topdir="../../$(srcdir)" ;; \ + esac ;; \ + esac; \ + if [ "$(srcdir)" = "." ] ; then \ + if [ "$(BUILD_SUBDIR)" != "." ] ; then \ + if $(SHELL) $$s/symlink-tree $${topdir}/libiberty "no-such-file" ; then \ + if [ -f Makefile ]; then \ + if $(MAKE) distclean; then \ + true; \ + else \ + exit 1; \ + fi; \ + else \ + true; \ + fi; \ + else \ + exit 1; \ + fi; \ + else \ + true; \ + fi; \ + srcdiroption="--srcdir=."; \ + libsrcdir="."; \ + else \ + srcdiroption="--srcdir=$${topdir}/libiberty"; \ + libsrcdir="$$s/libiberty"; \ + fi; \ + rm -f no-such-file || : ; \ + CONFIG_SITE=no-such-file $(SHELL) $${libsrcdir}/configure \ + $(BUILD_CONFIGARGS) $${srcdiroption} \ + --with-build-subdir="$(BUILD_SUBDIR)" \ || exit 1 -# Host modules. +.PHONY: all-build-libiberty maybe-all-build-libiberty +maybe-all-build-libiberty: +all-build-libiberty: configure-build-libiberty + @r=`${PWD_COMMAND}`; export r; \ + s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ + (cd $(BUILD_SUBDIR)/libiberty && $(MAKE) all) + + +# -------------------------------------- +# Modules which run on the host machine +# -------------------------------------- + +.PHONY: configure-ash maybe-configure-ash +maybe-configure-ash: +configure-ash: + @test ! -f ash/Makefile || exit 0; \ + [ -d ash ] || mkdir ash; \ + r=`${PWD_COMMAND}`; export r; \ + s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ + CC="$(CC)"; export CC; \ + CFLAGS="$(CFLAGS)"; export CFLAGS; \ + CONFIG_SHELL="$(SHELL)"; export CONFIG_SHELL; \ + CXX="$(CXX)"; export CXX; \ + CXXFLAGS="$(CXXFLAGS)"; export CXXFLAGS; \ + AR="$(AR)"; export AR; \ + AS="$(AS)"; export AS; \ + CC_FOR_BUILD="$(CC_FOR_BUILD)"; export CC_FOR_BUILD; \ + DLLTOOL="$(DLLTOOL)"; export DLLTOOL; \ + LD="$(LD)"; export LD; \ + NM="$(NM)"; export NM; \ + RANLIB="$(RANLIB)"; export RANLIB; \ + WINDRES="$(WINDRES)"; export WINDRES; \ + OBJCOPY="$(OBJCOPY)"; export OBJCOPY; \ + OBJDUMP="$(OBJDUMP)"; export OBJDUMP; \ + echo Configuring in ash; \ + cd ash || exit 1; \ + case $(srcdir) in \ + \.) \ + srcdiroption="--srcdir=."; \ + libsrcdir=".";; \ + /* | [A-Za-z]:[\\/]*) \ + srcdiroption="--srcdir=$(srcdir)/ash"; \ + libsrcdir="$$s/ash";; \ + *) \ + srcdiroption="--srcdir=../$(srcdir)/ash"; \ + libsrcdir="$$s/ash";; \ + esac; \ + $(SHELL) $${libsrcdir}/configure \ + $(HOST_CONFIGARGS) $${srcdiroption} \ + || exit 1 + +.PHONY: all-ash maybe-all-ash +maybe-all-ash: +all-ash: configure-ash + @r=`${PWD_COMMAND}`; export r; \ + s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ + $(SET_LIB_PATH) \ + (cd ash && $(MAKE) $(FLAGS_TO_PASS) all) + +.PHONY: check-ash maybe-check-ash +maybe-check-ash: + +check-ash: + @r=`${PWD_COMMAND}`; export r; \ + s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ + $(SET_LIB_PATH) \ + (cd ash && $(MAKE) $(FLAGS_TO_PASS) check) + + +.PHONY: install-ash maybe-install-ash +maybe-install-ash: + +install-ash: installdirs + @r=`${PWD_COMMAND}`; export r; \ + s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ + $(SET_LIB_PATH) \ + (cd ash && $(MAKE) $(FLAGS_TO_PASS) install) + + +# Other targets (info, dvi, etc.) .PHONY: maybe-info-ash info-ash maybe-info-ash: @@ -843,262 +2061,263 @@ info-ash: \ || exit 1 -.PHONY: maybe-info-autoconf info-autoconf -maybe-info-autoconf: +.PHONY: maybe-dvi-ash dvi-ash +maybe-dvi-ash: -info-autoconf: \ - configure-autoconf - @[ -f ./autoconf/Makefile ] || exit 0; \ +dvi-ash: \ + configure-ash + @[ -f ./ash/Makefile ] || exit 0; \ r=`${PWD_COMMAND}`; export r; \ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ $(SET_LIB_PATH) \ for flag in $(EXTRA_HOST_FLAGS); do \ eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \ done; \ - echo "Doing info in autoconf" ; \ - (cd autoconf && \ + echo "Doing dvi in ash" ; \ + (cd ash && \ $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \ "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \ "RANLIB=$${RANLIB}" \ "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" \ - info) \ + dvi) \ || exit 1 -.PHONY: maybe-info-automake info-automake -maybe-info-automake: +.PHONY: maybe-TAGS-ash TAGS-ash +maybe-TAGS-ash: -info-automake: \ - configure-automake - @[ -f ./automake/Makefile ] || exit 0; \ +TAGS-ash: \ + configure-ash + @[ -f ./ash/Makefile ] || exit 0; \ r=`${PWD_COMMAND}`; export r; \ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ $(SET_LIB_PATH) \ for flag in $(EXTRA_HOST_FLAGS); do \ eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \ done; \ - echo "Doing info in automake" ; \ - (cd automake && \ + echo "Doing TAGS in ash" ; \ + (cd ash && \ $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \ "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \ "RANLIB=$${RANLIB}" \ "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" \ - info) \ + TAGS) \ || exit 1 -.PHONY: maybe-info-bash info-bash -maybe-info-bash: +.PHONY: maybe-install-info-ash install-info-ash +maybe-install-info-ash: -info-bash: \ - configure-bash - @[ -f ./bash/Makefile ] || exit 0; \ +install-info-ash: \ + configure-ash \ + info-ash + @[ -f ./ash/Makefile ] || exit 0; \ r=`${PWD_COMMAND}`; export r; \ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ $(SET_LIB_PATH) \ for flag in $(EXTRA_HOST_FLAGS); do \ eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \ done; \ - echo "Doing info in bash" ; \ - (cd bash && \ + echo "Doing install-info in ash" ; \ + (cd ash && \ $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \ "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \ "RANLIB=$${RANLIB}" \ "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" \ - info) \ + install-info) \ || exit 1 -.PHONY: maybe-info-bfd info-bfd -maybe-info-bfd: +.PHONY: maybe-installcheck-ash installcheck-ash +maybe-installcheck-ash: -info-bfd: \ - configure-bfd - @[ -f ./bfd/Makefile ] || exit 0; \ +installcheck-ash: \ + configure-ash + @[ -f ./ash/Makefile ] || exit 0; \ r=`${PWD_COMMAND}`; export r; \ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ $(SET_LIB_PATH) \ for flag in $(EXTRA_HOST_FLAGS); do \ eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \ done; \ - echo "Doing info in bfd" ; \ - (cd bfd && \ + echo "Doing installcheck in ash" ; \ + (cd ash && \ $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \ "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \ "RANLIB=$${RANLIB}" \ "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" \ - info) \ + installcheck) \ || exit 1 -.PHONY: maybe-info-opcodes info-opcodes -maybe-info-opcodes: +.PHONY: maybe-mostlyclean-ash mostlyclean-ash +maybe-mostlyclean-ash: -info-opcodes: \ - configure-opcodes - @[ -f ./opcodes/Makefile ] || exit 0; \ +mostlyclean-ash: + @[ -f ./ash/Makefile ] || exit 0; \ r=`${PWD_COMMAND}`; export r; \ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ $(SET_LIB_PATH) \ for flag in $(EXTRA_HOST_FLAGS); do \ eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \ done; \ - echo "Doing info in opcodes" ; \ - (cd opcodes && \ + echo "Doing mostlyclean in ash" ; \ + (cd ash && \ $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \ "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \ "RANLIB=$${RANLIB}" \ "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" \ - info) \ + mostlyclean) \ || exit 1 -.PHONY: maybe-info-binutils info-binutils -maybe-info-binutils: +.PHONY: maybe-clean-ash clean-ash +maybe-clean-ash: -info-binutils: \ - configure-binutils - @[ -f ./binutils/Makefile ] || exit 0; \ +clean-ash: + @[ -f ./ash/Makefile ] || exit 0; \ r=`${PWD_COMMAND}`; export r; \ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ $(SET_LIB_PATH) \ for flag in $(EXTRA_HOST_FLAGS); do \ eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \ done; \ - echo "Doing info in binutils" ; \ - (cd binutils && \ + echo "Doing clean in ash" ; \ + (cd ash && \ $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \ "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \ "RANLIB=$${RANLIB}" \ "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" \ - info) \ + clean) \ || exit 1 -.PHONY: maybe-info-bison info-bison -maybe-info-bison: +.PHONY: maybe-distclean-ash distclean-ash +maybe-distclean-ash: -info-bison: \ - configure-bison - @[ -f ./bison/Makefile ] || exit 0; \ +distclean-ash: + @[ -f ./ash/Makefile ] || exit 0; \ r=`${PWD_COMMAND}`; export r; \ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ $(SET_LIB_PATH) \ for flag in $(EXTRA_HOST_FLAGS); do \ eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \ done; \ - echo "Doing info in bison" ; \ - (cd bison && \ + echo "Doing distclean in ash" ; \ + (cd ash && \ $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \ "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \ "RANLIB=$${RANLIB}" \ "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" \ - info) \ + distclean) \ || exit 1 -.PHONY: maybe-info-byacc info-byacc -maybe-info-byacc: +.PHONY: maybe-maintainer-clean-ash maintainer-clean-ash +maybe-maintainer-clean-ash: -info-byacc: \ - configure-byacc - @[ -f ./byacc/Makefile ] || exit 0; \ +maintainer-clean-ash: + @[ -f ./ash/Makefile ] || exit 0; \ r=`${PWD_COMMAND}`; export r; \ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ $(SET_LIB_PATH) \ for flag in $(EXTRA_HOST_FLAGS); do \ eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \ done; \ - echo "Doing info in byacc" ; \ - (cd byacc && \ + echo "Doing maintainer-clean in ash" ; \ + (cd ash && \ $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \ "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \ "RANLIB=$${RANLIB}" \ "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" \ - info) \ + maintainer-clean) \ || exit 1 -.PHONY: maybe-info-bzip2 info-bzip2 -maybe-info-bzip2: -info-bzip2: \ - configure-bzip2 - @[ -f ./bzip2/Makefile ] || exit 0; \ +.PHONY: configure-autoconf maybe-configure-autoconf +maybe-configure-autoconf: +configure-autoconf: + @test ! -f autoconf/Makefile || exit 0; \ + [ -d autoconf ] || mkdir autoconf; \ r=`${PWD_COMMAND}`; export r; \ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ - $(SET_LIB_PATH) \ - for flag in $(EXTRA_HOST_FLAGS); do \ - eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \ - done; \ - echo "Doing info in bzip2" ; \ - (cd bzip2 && \ - $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \ - "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \ - "RANLIB=$${RANLIB}" \ - "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" \ - info) \ + CC="$(CC)"; export CC; \ + CFLAGS="$(CFLAGS)"; export CFLAGS; \ + CONFIG_SHELL="$(SHELL)"; export CONFIG_SHELL; \ + CXX="$(CXX)"; export CXX; \ + CXXFLAGS="$(CXXFLAGS)"; export CXXFLAGS; \ + AR="$(AR)"; export AR; \ + AS="$(AS)"; export AS; \ + CC_FOR_BUILD="$(CC_FOR_BUILD)"; export CC_FOR_BUILD; \ + DLLTOOL="$(DLLTOOL)"; export DLLTOOL; \ + LD="$(LD)"; export LD; \ + NM="$(NM)"; export NM; \ + RANLIB="$(RANLIB)"; export RANLIB; \ + WINDRES="$(WINDRES)"; export WINDRES; \ + OBJCOPY="$(OBJCOPY)"; export OBJCOPY; \ + OBJDUMP="$(OBJDUMP)"; export OBJDUMP; \ + echo Configuring in autoconf; \ + cd autoconf || exit 1; \ + case $(srcdir) in \ + \.) \ + srcdiroption="--srcdir=."; \ + libsrcdir=".";; \ + /* | [A-Za-z]:[\\/]*) \ + srcdiroption="--srcdir=$(srcdir)/autoconf"; \ + libsrcdir="$$s/autoconf";; \ + *) \ + srcdiroption="--srcdir=../$(srcdir)/autoconf"; \ + libsrcdir="$$s/autoconf";; \ + esac; \ + $(SHELL) $${libsrcdir}/configure \ + $(HOST_CONFIGARGS) $${srcdiroption} \ || exit 1 +.PHONY: all-autoconf maybe-all-autoconf +maybe-all-autoconf: +all-autoconf: configure-autoconf + @r=`${PWD_COMMAND}`; export r; \ + s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ + $(SET_LIB_PATH) \ + (cd autoconf && $(MAKE) $(FLAGS_TO_PASS) all) -.PHONY: maybe-info-dejagnu info-dejagnu -maybe-info-dejagnu: +.PHONY: check-autoconf maybe-check-autoconf +maybe-check-autoconf: -info-dejagnu: \ - configure-dejagnu - @[ -f ./dejagnu/Makefile ] || exit 0; \ - r=`${PWD_COMMAND}`; export r; \ +check-autoconf: + @r=`${PWD_COMMAND}`; export r; \ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ $(SET_LIB_PATH) \ - for flag in $(EXTRA_HOST_FLAGS); do \ - eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \ - done; \ - echo "Doing info in dejagnu" ; \ - (cd dejagnu && \ - $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \ - "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \ - "RANLIB=$${RANLIB}" \ - "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" \ - info) \ - || exit 1 + (cd autoconf && $(MAKE) $(FLAGS_TO_PASS) check) -.PHONY: maybe-info-diff info-diff -maybe-info-diff: +.PHONY: install-autoconf maybe-install-autoconf +maybe-install-autoconf: -info-diff: \ - configure-diff - @[ -f ./diff/Makefile ] || exit 0; \ - r=`${PWD_COMMAND}`; export r; \ +install-autoconf: installdirs + @r=`${PWD_COMMAND}`; export r; \ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ $(SET_LIB_PATH) \ - for flag in $(EXTRA_HOST_FLAGS); do \ - eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \ - done; \ - echo "Doing info in diff" ; \ - (cd diff && \ - $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \ - "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \ - "RANLIB=$${RANLIB}" \ - "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" \ - info) \ - || exit 1 + (cd autoconf && $(MAKE) $(FLAGS_TO_PASS) install) -.PHONY: maybe-info-dosutils info-dosutils -maybe-info-dosutils: +# Other targets (info, dvi, etc.) -info-dosutils: \ - configure-dosutils - @[ -f ./dosutils/Makefile ] || exit 0; \ +.PHONY: maybe-info-autoconf info-autoconf +maybe-info-autoconf: + +info-autoconf: \ + configure-autoconf + @[ -f ./autoconf/Makefile ] || exit 0; \ r=`${PWD_COMMAND}`; export r; \ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ $(SET_LIB_PATH) \ for flag in $(EXTRA_HOST_FLAGS); do \ eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \ done; \ - echo "Doing info in dosutils" ; \ - (cd dosutils && \ + echo "Doing info in autoconf" ; \ + (cd autoconf && \ $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \ "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \ "RANLIB=$${RANLIB}" \ @@ -1107,262 +2326,263 @@ info-dosutils: \ || exit 1 -.PHONY: maybe-info-etc info-etc -maybe-info-etc: +.PHONY: maybe-dvi-autoconf dvi-autoconf +maybe-dvi-autoconf: -info-etc: \ - configure-etc - @[ -f ./etc/Makefile ] || exit 0; \ +dvi-autoconf: \ + configure-autoconf + @[ -f ./autoconf/Makefile ] || exit 0; \ r=`${PWD_COMMAND}`; export r; \ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ $(SET_LIB_PATH) \ for flag in $(EXTRA_HOST_FLAGS); do \ eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \ done; \ - echo "Doing info in etc" ; \ - (cd etc && \ + echo "Doing dvi in autoconf" ; \ + (cd autoconf && \ $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \ "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \ "RANLIB=$${RANLIB}" \ "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" \ - info) \ + dvi) \ || exit 1 -.PHONY: maybe-info-fastjar info-fastjar -maybe-info-fastjar: +.PHONY: maybe-TAGS-autoconf TAGS-autoconf +maybe-TAGS-autoconf: -info-fastjar: \ - configure-fastjar - @[ -f ./fastjar/Makefile ] || exit 0; \ +TAGS-autoconf: \ + configure-autoconf + @[ -f ./autoconf/Makefile ] || exit 0; \ r=`${PWD_COMMAND}`; export r; \ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ $(SET_LIB_PATH) \ for flag in $(EXTRA_HOST_FLAGS); do \ eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \ done; \ - echo "Doing info in fastjar" ; \ - (cd fastjar && \ + echo "Doing TAGS in autoconf" ; \ + (cd autoconf && \ $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \ "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \ "RANLIB=$${RANLIB}" \ "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" \ - info) \ + TAGS) \ || exit 1 -.PHONY: maybe-info-fileutils info-fileutils -maybe-info-fileutils: +.PHONY: maybe-install-info-autoconf install-info-autoconf +maybe-install-info-autoconf: -info-fileutils: \ - configure-fileutils - @[ -f ./fileutils/Makefile ] || exit 0; \ +install-info-autoconf: \ + configure-autoconf \ + info-autoconf + @[ -f ./autoconf/Makefile ] || exit 0; \ r=`${PWD_COMMAND}`; export r; \ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ $(SET_LIB_PATH) \ for flag in $(EXTRA_HOST_FLAGS); do \ eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \ done; \ - echo "Doing info in fileutils" ; \ - (cd fileutils && \ + echo "Doing install-info in autoconf" ; \ + (cd autoconf && \ $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \ "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \ "RANLIB=$${RANLIB}" \ "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" \ - info) \ + install-info) \ || exit 1 -.PHONY: maybe-info-findutils info-findutils -maybe-info-findutils: +.PHONY: maybe-installcheck-autoconf installcheck-autoconf +maybe-installcheck-autoconf: -info-findutils: \ - configure-findutils - @[ -f ./findutils/Makefile ] || exit 0; \ +installcheck-autoconf: \ + configure-autoconf + @[ -f ./autoconf/Makefile ] || exit 0; \ r=`${PWD_COMMAND}`; export r; \ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ $(SET_LIB_PATH) \ for flag in $(EXTRA_HOST_FLAGS); do \ eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \ done; \ - echo "Doing info in findutils" ; \ - (cd findutils && \ + echo "Doing installcheck in autoconf" ; \ + (cd autoconf && \ $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \ "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \ "RANLIB=$${RANLIB}" \ "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" \ - info) \ + installcheck) \ || exit 1 -.PHONY: maybe-info-find info-find -maybe-info-find: +.PHONY: maybe-mostlyclean-autoconf mostlyclean-autoconf +maybe-mostlyclean-autoconf: -info-find: \ - configure-find - @[ -f ./find/Makefile ] || exit 0; \ +mostlyclean-autoconf: + @[ -f ./autoconf/Makefile ] || exit 0; \ r=`${PWD_COMMAND}`; export r; \ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ $(SET_LIB_PATH) \ for flag in $(EXTRA_HOST_FLAGS); do \ eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \ done; \ - echo "Doing info in find" ; \ - (cd find && \ + echo "Doing mostlyclean in autoconf" ; \ + (cd autoconf && \ $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \ "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \ "RANLIB=$${RANLIB}" \ "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" \ - info) \ + mostlyclean) \ || exit 1 -.PHONY: maybe-info-flex info-flex -maybe-info-flex: +.PHONY: maybe-clean-autoconf clean-autoconf +maybe-clean-autoconf: -info-flex: \ - configure-flex - @[ -f ./flex/Makefile ] || exit 0; \ +clean-autoconf: + @[ -f ./autoconf/Makefile ] || exit 0; \ r=`${PWD_COMMAND}`; export r; \ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ $(SET_LIB_PATH) \ for flag in $(EXTRA_HOST_FLAGS); do \ eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \ done; \ - echo "Doing info in flex" ; \ - (cd flex && \ + echo "Doing clean in autoconf" ; \ + (cd autoconf && \ $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \ "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \ "RANLIB=$${RANLIB}" \ "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" \ - info) \ + clean) \ || exit 1 -.PHONY: maybe-info-gas info-gas -maybe-info-gas: +.PHONY: maybe-distclean-autoconf distclean-autoconf +maybe-distclean-autoconf: -info-gas: \ - configure-gas - @[ -f ./gas/Makefile ] || exit 0; \ +distclean-autoconf: + @[ -f ./autoconf/Makefile ] || exit 0; \ r=`${PWD_COMMAND}`; export r; \ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ $(SET_LIB_PATH) \ for flag in $(EXTRA_HOST_FLAGS); do \ eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \ done; \ - echo "Doing info in gas" ; \ - (cd gas && \ + echo "Doing distclean in autoconf" ; \ + (cd autoconf && \ $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \ "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \ "RANLIB=$${RANLIB}" \ "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" \ - info) \ + distclean) \ || exit 1 -.PHONY: maybe-info-gawk info-gawk -maybe-info-gawk: +.PHONY: maybe-maintainer-clean-autoconf maintainer-clean-autoconf +maybe-maintainer-clean-autoconf: -info-gawk: \ - configure-gawk - @[ -f ./gawk/Makefile ] || exit 0; \ +maintainer-clean-autoconf: + @[ -f ./autoconf/Makefile ] || exit 0; \ r=`${PWD_COMMAND}`; export r; \ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ $(SET_LIB_PATH) \ for flag in $(EXTRA_HOST_FLAGS); do \ eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \ done; \ - echo "Doing info in gawk" ; \ - (cd gawk && \ + echo "Doing maintainer-clean in autoconf" ; \ + (cd autoconf && \ $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \ "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \ "RANLIB=$${RANLIB}" \ "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" \ - info) \ + maintainer-clean) \ || exit 1 -.PHONY: maybe-info-gettext info-gettext -maybe-info-gettext: -info-gettext: \ - configure-gettext - @[ -f ./gettext/Makefile ] || exit 0; \ +.PHONY: configure-automake maybe-configure-automake +maybe-configure-automake: +configure-automake: + @test ! -f automake/Makefile || exit 0; \ + [ -d automake ] || mkdir automake; \ r=`${PWD_COMMAND}`; export r; \ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ - $(SET_LIB_PATH) \ - for flag in $(EXTRA_HOST_FLAGS); do \ - eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \ - done; \ - echo "Doing info in gettext" ; \ - (cd gettext && \ - $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \ - "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \ - "RANLIB=$${RANLIB}" \ - "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" \ - info) \ + CC="$(CC)"; export CC; \ + CFLAGS="$(CFLAGS)"; export CFLAGS; \ + CONFIG_SHELL="$(SHELL)"; export CONFIG_SHELL; \ + CXX="$(CXX)"; export CXX; \ + CXXFLAGS="$(CXXFLAGS)"; export CXXFLAGS; \ + AR="$(AR)"; export AR; \ + AS="$(AS)"; export AS; \ + CC_FOR_BUILD="$(CC_FOR_BUILD)"; export CC_FOR_BUILD; \ + DLLTOOL="$(DLLTOOL)"; export DLLTOOL; \ + LD="$(LD)"; export LD; \ + NM="$(NM)"; export NM; \ + RANLIB="$(RANLIB)"; export RANLIB; \ + WINDRES="$(WINDRES)"; export WINDRES; \ + OBJCOPY="$(OBJCOPY)"; export OBJCOPY; \ + OBJDUMP="$(OBJDUMP)"; export OBJDUMP; \ + echo Configuring in automake; \ + cd automake || exit 1; \ + case $(srcdir) in \ + \.) \ + srcdiroption="--srcdir=."; \ + libsrcdir=".";; \ + /* | [A-Za-z]:[\\/]*) \ + srcdiroption="--srcdir=$(srcdir)/automake"; \ + libsrcdir="$$s/automake";; \ + *) \ + srcdiroption="--srcdir=../$(srcdir)/automake"; \ + libsrcdir="$$s/automake";; \ + esac; \ + $(SHELL) $${libsrcdir}/configure \ + $(HOST_CONFIGARGS) $${srcdiroption} \ || exit 1 +.PHONY: all-automake maybe-all-automake +maybe-all-automake: +all-automake: configure-automake + @r=`${PWD_COMMAND}`; export r; \ + s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ + $(SET_LIB_PATH) \ + (cd automake && $(MAKE) $(FLAGS_TO_PASS) all) -.PHONY: maybe-info-gnuserv info-gnuserv -maybe-info-gnuserv: +.PHONY: check-automake maybe-check-automake +maybe-check-automake: -info-gnuserv: \ - configure-gnuserv - @[ -f ./gnuserv/Makefile ] || exit 0; \ - r=`${PWD_COMMAND}`; export r; \ +check-automake: + @r=`${PWD_COMMAND}`; export r; \ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ $(SET_LIB_PATH) \ - for flag in $(EXTRA_HOST_FLAGS); do \ - eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \ - done; \ - echo "Doing info in gnuserv" ; \ - (cd gnuserv && \ - $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \ - "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \ - "RANLIB=$${RANLIB}" \ - "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" \ - info) \ - || exit 1 + (cd automake && $(MAKE) $(FLAGS_TO_PASS) check) -.PHONY: maybe-info-gprof info-gprof -maybe-info-gprof: +.PHONY: install-automake maybe-install-automake +maybe-install-automake: -info-gprof: \ - configure-gprof - @[ -f ./gprof/Makefile ] || exit 0; \ - r=`${PWD_COMMAND}`; export r; \ +install-automake: installdirs + @r=`${PWD_COMMAND}`; export r; \ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ $(SET_LIB_PATH) \ - for flag in $(EXTRA_HOST_FLAGS); do \ - eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \ - done; \ - echo "Doing info in gprof" ; \ - (cd gprof && \ - $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \ - "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \ - "RANLIB=$${RANLIB}" \ - "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" \ - info) \ - || exit 1 + (cd automake && $(MAKE) $(FLAGS_TO_PASS) install) -.PHONY: maybe-info-gzip info-gzip -maybe-info-gzip: +# Other targets (info, dvi, etc.) -info-gzip: \ - configure-gzip - @[ -f ./gzip/Makefile ] || exit 0; \ +.PHONY: maybe-info-automake info-automake +maybe-info-automake: + +info-automake: \ + configure-automake + @[ -f ./automake/Makefile ] || exit 0; \ r=`${PWD_COMMAND}`; export r; \ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ $(SET_LIB_PATH) \ for flag in $(EXTRA_HOST_FLAGS); do \ eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \ done; \ - echo "Doing info in gzip" ; \ - (cd gzip && \ + echo "Doing info in automake" ; \ + (cd automake && \ $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \ "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \ "RANLIB=$${RANLIB}" \ @@ -1371,262 +2591,263 @@ info-gzip: \ || exit 1 -.PHONY: maybe-info-hello info-hello -maybe-info-hello: +.PHONY: maybe-dvi-automake dvi-automake +maybe-dvi-automake: -info-hello: \ - configure-hello - @[ -f ./hello/Makefile ] || exit 0; \ +dvi-automake: \ + configure-automake + @[ -f ./automake/Makefile ] || exit 0; \ r=`${PWD_COMMAND}`; export r; \ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ $(SET_LIB_PATH) \ for flag in $(EXTRA_HOST_FLAGS); do \ eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \ done; \ - echo "Doing info in hello" ; \ - (cd hello && \ + echo "Doing dvi in automake" ; \ + (cd automake && \ $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \ "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \ "RANLIB=$${RANLIB}" \ "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" \ - info) \ + dvi) \ || exit 1 -.PHONY: maybe-info-indent info-indent -maybe-info-indent: +.PHONY: maybe-TAGS-automake TAGS-automake +maybe-TAGS-automake: -info-indent: \ - configure-indent - @[ -f ./indent/Makefile ] || exit 0; \ +TAGS-automake: \ + configure-automake + @[ -f ./automake/Makefile ] || exit 0; \ r=`${PWD_COMMAND}`; export r; \ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ $(SET_LIB_PATH) \ for flag in $(EXTRA_HOST_FLAGS); do \ eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \ done; \ - echo "Doing info in indent" ; \ - (cd indent && \ + echo "Doing TAGS in automake" ; \ + (cd automake && \ $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \ "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \ "RANLIB=$${RANLIB}" \ "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" \ - info) \ + TAGS) \ || exit 1 -.PHONY: maybe-info-intl info-intl -maybe-info-intl: +.PHONY: maybe-install-info-automake install-info-automake +maybe-install-info-automake: -info-intl: \ - configure-intl - @[ -f ./intl/Makefile ] || exit 0; \ +install-info-automake: \ + configure-automake \ + info-automake + @[ -f ./automake/Makefile ] || exit 0; \ r=`${PWD_COMMAND}`; export r; \ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ $(SET_LIB_PATH) \ for flag in $(EXTRA_HOST_FLAGS); do \ eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \ done; \ - echo "Doing info in intl" ; \ - (cd intl && \ + echo "Doing install-info in automake" ; \ + (cd automake && \ $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \ "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \ "RANLIB=$${RANLIB}" \ "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" \ - info) \ + install-info) \ || exit 1 -.PHONY: maybe-info-tcl info-tcl -maybe-info-tcl: +.PHONY: maybe-installcheck-automake installcheck-automake +maybe-installcheck-automake: -info-tcl: \ - configure-tcl - @[ -f ./tcl/Makefile ] || exit 0; \ +installcheck-automake: \ + configure-automake + @[ -f ./automake/Makefile ] || exit 0; \ r=`${PWD_COMMAND}`; export r; \ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ $(SET_LIB_PATH) \ for flag in $(EXTRA_HOST_FLAGS); do \ eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \ done; \ - echo "Doing info in tcl" ; \ - (cd tcl && \ + echo "Doing installcheck in automake" ; \ + (cd automake && \ $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \ "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \ "RANLIB=$${RANLIB}" \ "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" \ - info) \ + installcheck) \ || exit 1 -.PHONY: maybe-info-itcl info-itcl -maybe-info-itcl: +.PHONY: maybe-mostlyclean-automake mostlyclean-automake +maybe-mostlyclean-automake: -info-itcl: \ - configure-itcl - @[ -f ./itcl/Makefile ] || exit 0; \ +mostlyclean-automake: + @[ -f ./automake/Makefile ] || exit 0; \ r=`${PWD_COMMAND}`; export r; \ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ $(SET_LIB_PATH) \ for flag in $(EXTRA_HOST_FLAGS); do \ eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \ done; \ - echo "Doing info in itcl" ; \ - (cd itcl && \ + echo "Doing mostlyclean in automake" ; \ + (cd automake && \ $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \ "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \ "RANLIB=$${RANLIB}" \ "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" \ - info) \ + mostlyclean) \ || exit 1 -.PHONY: maybe-info-ld info-ld -maybe-info-ld: +.PHONY: maybe-clean-automake clean-automake +maybe-clean-automake: -info-ld: \ - configure-ld - @[ -f ./ld/Makefile ] || exit 0; \ +clean-automake: + @[ -f ./automake/Makefile ] || exit 0; \ r=`${PWD_COMMAND}`; export r; \ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ $(SET_LIB_PATH) \ for flag in $(EXTRA_HOST_FLAGS); do \ eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \ done; \ - echo "Doing info in ld" ; \ - (cd ld && \ + echo "Doing clean in automake" ; \ + (cd automake && \ $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \ "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \ "RANLIB=$${RANLIB}" \ "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" \ - info) \ + clean) \ || exit 1 -.PHONY: maybe-info-libgui info-libgui -maybe-info-libgui: +.PHONY: maybe-distclean-automake distclean-automake +maybe-distclean-automake: -info-libgui: \ - configure-libgui - @[ -f ./libgui/Makefile ] || exit 0; \ +distclean-automake: + @[ -f ./automake/Makefile ] || exit 0; \ r=`${PWD_COMMAND}`; export r; \ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ $(SET_LIB_PATH) \ for flag in $(EXTRA_HOST_FLAGS); do \ eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \ done; \ - echo "Doing info in libgui" ; \ - (cd libgui && \ + echo "Doing distclean in automake" ; \ + (cd automake && \ $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \ "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \ "RANLIB=$${RANLIB}" \ "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" \ - info) \ + distclean) \ || exit 1 -.PHONY: maybe-info-libiberty info-libiberty -maybe-info-libiberty: +.PHONY: maybe-maintainer-clean-automake maintainer-clean-automake +maybe-maintainer-clean-automake: -info-libiberty: \ - configure-libiberty - @[ -f ./libiberty/Makefile ] || exit 0; \ +maintainer-clean-automake: + @[ -f ./automake/Makefile ] || exit 0; \ r=`${PWD_COMMAND}`; export r; \ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ $(SET_LIB_PATH) \ for flag in $(EXTRA_HOST_FLAGS); do \ eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \ done; \ - echo "Doing info in libiberty" ; \ - (cd libiberty && \ + echo "Doing maintainer-clean in automake" ; \ + (cd automake && \ $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \ "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \ "RANLIB=$${RANLIB}" \ "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" \ - info) \ + maintainer-clean) \ || exit 1 -.PHONY: maybe-info-libtool info-libtool -maybe-info-libtool: -info-libtool: \ - configure-libtool - @[ -f ./libtool/Makefile ] || exit 0; \ +.PHONY: configure-bash maybe-configure-bash +maybe-configure-bash: +configure-bash: + @test ! -f bash/Makefile || exit 0; \ + [ -d bash ] || mkdir bash; \ r=`${PWD_COMMAND}`; export r; \ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ - $(SET_LIB_PATH) \ - for flag in $(EXTRA_HOST_FLAGS); do \ - eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \ - done; \ - echo "Doing info in libtool" ; \ - (cd libtool && \ - $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \ - "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \ - "RANLIB=$${RANLIB}" \ - "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" \ - info) \ + CC="$(CC)"; export CC; \ + CFLAGS="$(CFLAGS)"; export CFLAGS; \ + CONFIG_SHELL="$(SHELL)"; export CONFIG_SHELL; \ + CXX="$(CXX)"; export CXX; \ + CXXFLAGS="$(CXXFLAGS)"; export CXXFLAGS; \ + AR="$(AR)"; export AR; \ + AS="$(AS)"; export AS; \ + CC_FOR_BUILD="$(CC_FOR_BUILD)"; export CC_FOR_BUILD; \ + DLLTOOL="$(DLLTOOL)"; export DLLTOOL; \ + LD="$(LD)"; export LD; \ + NM="$(NM)"; export NM; \ + RANLIB="$(RANLIB)"; export RANLIB; \ + WINDRES="$(WINDRES)"; export WINDRES; \ + OBJCOPY="$(OBJCOPY)"; export OBJCOPY; \ + OBJDUMP="$(OBJDUMP)"; export OBJDUMP; \ + echo Configuring in bash; \ + cd bash || exit 1; \ + case $(srcdir) in \ + \.) \ + srcdiroption="--srcdir=."; \ + libsrcdir=".";; \ + /* | [A-Za-z]:[\\/]*) \ + srcdiroption="--srcdir=$(srcdir)/bash"; \ + libsrcdir="$$s/bash";; \ + *) \ + srcdiroption="--srcdir=../$(srcdir)/bash"; \ + libsrcdir="$$s/bash";; \ + esac; \ + $(SHELL) $${libsrcdir}/configure \ + $(HOST_CONFIGARGS) $${srcdiroption} \ || exit 1 +.PHONY: all-bash maybe-all-bash +maybe-all-bash: +all-bash: configure-bash + @r=`${PWD_COMMAND}`; export r; \ + s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ + $(SET_LIB_PATH) \ + (cd bash && $(MAKE) $(FLAGS_TO_PASS) all) -.PHONY: maybe-info-m4 info-m4 -maybe-info-m4: +.PHONY: check-bash maybe-check-bash +maybe-check-bash: -info-m4: \ - configure-m4 - @[ -f ./m4/Makefile ] || exit 0; \ - r=`${PWD_COMMAND}`; export r; \ +check-bash: + @r=`${PWD_COMMAND}`; export r; \ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ $(SET_LIB_PATH) \ - for flag in $(EXTRA_HOST_FLAGS); do \ - eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \ - done; \ - echo "Doing info in m4" ; \ - (cd m4 && \ - $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \ - "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \ - "RANLIB=$${RANLIB}" \ - "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" \ - info) \ - || exit 1 + (cd bash && $(MAKE) $(FLAGS_TO_PASS) check) -.PHONY: maybe-info-make info-make -maybe-info-make: +.PHONY: install-bash maybe-install-bash +maybe-install-bash: -info-make: \ - configure-make - @[ -f ./make/Makefile ] || exit 0; \ - r=`${PWD_COMMAND}`; export r; \ +install-bash: installdirs + @r=`${PWD_COMMAND}`; export r; \ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ $(SET_LIB_PATH) \ - for flag in $(EXTRA_HOST_FLAGS); do \ - eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \ - done; \ - echo "Doing info in make" ; \ - (cd make && \ - $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \ - "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \ - "RANLIB=$${RANLIB}" \ - "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" \ - info) \ - || exit 1 + (cd bash && $(MAKE) $(FLAGS_TO_PASS) install) -.PHONY: maybe-info-mmalloc info-mmalloc -maybe-info-mmalloc: +# Other targets (info, dvi, etc.) -info-mmalloc: \ - configure-mmalloc - @[ -f ./mmalloc/Makefile ] || exit 0; \ +.PHONY: maybe-info-bash info-bash +maybe-info-bash: + +info-bash: \ + configure-bash + @[ -f ./bash/Makefile ] || exit 0; \ r=`${PWD_COMMAND}`; export r; \ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ $(SET_LIB_PATH) \ for flag in $(EXTRA_HOST_FLAGS); do \ eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \ done; \ - echo "Doing info in mmalloc" ; \ - (cd mmalloc && \ + echo "Doing info in bash" ; \ + (cd bash && \ $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \ "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \ "RANLIB=$${RANLIB}" \ @@ -1635,240 +2856,263 @@ info-mmalloc: \ || exit 1 -.PHONY: maybe-info-patch info-patch -maybe-info-patch: +.PHONY: maybe-dvi-bash dvi-bash +maybe-dvi-bash: -info-patch: \ - configure-patch - @[ -f ./patch/Makefile ] || exit 0; \ +dvi-bash: \ + configure-bash + @[ -f ./bash/Makefile ] || exit 0; \ r=`${PWD_COMMAND}`; export r; \ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ $(SET_LIB_PATH) \ for flag in $(EXTRA_HOST_FLAGS); do \ eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \ done; \ - echo "Doing info in patch" ; \ - (cd patch && \ + echo "Doing dvi in bash" ; \ + (cd bash && \ $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \ "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \ "RANLIB=$${RANLIB}" \ "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" \ - info) \ + dvi) \ || exit 1 -.PHONY: maybe-info-perl info-perl -maybe-info-perl: +.PHONY: maybe-TAGS-bash TAGS-bash +maybe-TAGS-bash: -info-perl: \ - configure-perl - @[ -f ./perl/Makefile ] || exit 0; \ +TAGS-bash: \ + configure-bash + @[ -f ./bash/Makefile ] || exit 0; \ r=`${PWD_COMMAND}`; export r; \ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ $(SET_LIB_PATH) \ for flag in $(EXTRA_HOST_FLAGS); do \ eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \ done; \ - echo "Doing info in perl" ; \ - (cd perl && \ + echo "Doing TAGS in bash" ; \ + (cd bash && \ $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \ "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \ "RANLIB=$${RANLIB}" \ "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" \ - info) \ + TAGS) \ || exit 1 -.PHONY: maybe-info-prms info-prms -maybe-info-prms: +.PHONY: maybe-install-info-bash install-info-bash +maybe-install-info-bash: -info-prms: \ - configure-prms - @[ -f ./prms/Makefile ] || exit 0; \ +install-info-bash: \ + configure-bash \ + info-bash + @[ -f ./bash/Makefile ] || exit 0; \ r=`${PWD_COMMAND}`; export r; \ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ $(SET_LIB_PATH) \ for flag in $(EXTRA_HOST_FLAGS); do \ eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \ done; \ - echo "Doing info in prms" ; \ - (cd prms && \ + echo "Doing install-info in bash" ; \ + (cd bash && \ $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \ "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \ "RANLIB=$${RANLIB}" \ "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" \ - info) \ + install-info) \ || exit 1 -.PHONY: maybe-info-rcs info-rcs -maybe-info-rcs: +.PHONY: maybe-installcheck-bash installcheck-bash +maybe-installcheck-bash: -info-rcs: \ - configure-rcs - @[ -f ./rcs/Makefile ] || exit 0; \ +installcheck-bash: \ + configure-bash + @[ -f ./bash/Makefile ] || exit 0; \ r=`${PWD_COMMAND}`; export r; \ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ $(SET_LIB_PATH) \ for flag in $(EXTRA_HOST_FLAGS); do \ eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \ done; \ - echo "Doing info in rcs" ; \ - (cd rcs && \ + echo "Doing installcheck in bash" ; \ + (cd bash && \ $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \ "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \ "RANLIB=$${RANLIB}" \ "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" \ - info) \ + installcheck) \ || exit 1 -.PHONY: maybe-info-readline info-readline -maybe-info-readline: +.PHONY: maybe-mostlyclean-bash mostlyclean-bash +maybe-mostlyclean-bash: -info-readline: \ - configure-readline - @[ -f ./readline/Makefile ] || exit 0; \ +mostlyclean-bash: + @[ -f ./bash/Makefile ] || exit 0; \ r=`${PWD_COMMAND}`; export r; \ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ $(SET_LIB_PATH) \ for flag in $(EXTRA_HOST_FLAGS); do \ eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \ done; \ - echo "Doing info in readline" ; \ - (cd readline && \ + echo "Doing mostlyclean in bash" ; \ + (cd bash && \ $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \ "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \ "RANLIB=$${RANLIB}" \ "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" \ - info) \ + mostlyclean) \ || exit 1 -.PHONY: maybe-info-release info-release -maybe-info-release: +.PHONY: maybe-clean-bash clean-bash +maybe-clean-bash: -info-release: \ - configure-release - @[ -f ./release/Makefile ] || exit 0; \ +clean-bash: + @[ -f ./bash/Makefile ] || exit 0; \ r=`${PWD_COMMAND}`; export r; \ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ $(SET_LIB_PATH) \ for flag in $(EXTRA_HOST_FLAGS); do \ eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \ done; \ - echo "Doing info in release" ; \ - (cd release && \ + echo "Doing clean in bash" ; \ + (cd bash && \ $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \ "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \ "RANLIB=$${RANLIB}" \ "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" \ - info) \ + clean) \ || exit 1 -.PHONY: maybe-info-recode info-recode -maybe-info-recode: +.PHONY: maybe-distclean-bash distclean-bash +maybe-distclean-bash: -info-recode: \ - configure-recode - @[ -f ./recode/Makefile ] || exit 0; \ +distclean-bash: + @[ -f ./bash/Makefile ] || exit 0; \ r=`${PWD_COMMAND}`; export r; \ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ $(SET_LIB_PATH) \ for flag in $(EXTRA_HOST_FLAGS); do \ eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \ done; \ - echo "Doing info in recode" ; \ - (cd recode && \ + echo "Doing distclean in bash" ; \ + (cd bash && \ $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \ "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \ "RANLIB=$${RANLIB}" \ "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" \ - info) \ + distclean) \ || exit 1 -.PHONY: maybe-info-sed info-sed -maybe-info-sed: +.PHONY: maybe-maintainer-clean-bash maintainer-clean-bash +maybe-maintainer-clean-bash: -info-sed: \ - configure-sed - @[ -f ./sed/Makefile ] || exit 0; \ +maintainer-clean-bash: + @[ -f ./bash/Makefile ] || exit 0; \ r=`${PWD_COMMAND}`; export r; \ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ $(SET_LIB_PATH) \ for flag in $(EXTRA_HOST_FLAGS); do \ eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \ done; \ - echo "Doing info in sed" ; \ - (cd sed && \ + echo "Doing maintainer-clean in bash" ; \ + (cd bash && \ $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \ "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \ "RANLIB=$${RANLIB}" \ "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" \ - info) \ + maintainer-clean) \ || exit 1 -.PHONY: maybe-info-send-pr info-send-pr -maybe-info-send-pr: -info-send-pr: \ - configure-send-pr - @[ -f ./send-pr/Makefile ] || exit 0; \ +.PHONY: configure-bfd maybe-configure-bfd +maybe-configure-bfd: +configure-bfd: + @test ! -f bfd/Makefile || exit 0; \ + [ -d bfd ] || mkdir bfd; \ r=`${PWD_COMMAND}`; export r; \ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ - $(SET_LIB_PATH) \ - for flag in $(EXTRA_HOST_FLAGS); do \ - eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \ - done; \ - echo "Doing info in send-pr" ; \ - (cd send-pr && \ - $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \ - "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \ - "RANLIB=$${RANLIB}" \ - "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" \ - info) \ + CC="$(CC)"; export CC; \ + CFLAGS="$(CFLAGS)"; export CFLAGS; \ + CONFIG_SHELL="$(SHELL)"; export CONFIG_SHELL; \ + CXX="$(CXX)"; export CXX; \ + CXXFLAGS="$(CXXFLAGS)"; export CXXFLAGS; \ + AR="$(AR)"; export AR; \ + AS="$(AS)"; export AS; \ + CC_FOR_BUILD="$(CC_FOR_BUILD)"; export CC_FOR_BUILD; \ + DLLTOOL="$(DLLTOOL)"; export DLLTOOL; \ + LD="$(LD)"; export LD; \ + NM="$(NM)"; export NM; \ + RANLIB="$(RANLIB)"; export RANLIB; \ + WINDRES="$(WINDRES)"; export WINDRES; \ + OBJCOPY="$(OBJCOPY)"; export OBJCOPY; \ + OBJDUMP="$(OBJDUMP)"; export OBJDUMP; \ + echo Configuring in bfd; \ + cd bfd || exit 1; \ + case $(srcdir) in \ + \.) \ + srcdiroption="--srcdir=."; \ + libsrcdir=".";; \ + /* | [A-Za-z]:[\\/]*) \ + srcdiroption="--srcdir=$(srcdir)/bfd"; \ + libsrcdir="$$s/bfd";; \ + *) \ + srcdiroption="--srcdir=../$(srcdir)/bfd"; \ + libsrcdir="$$s/bfd";; \ + esac; \ + $(SHELL) $${libsrcdir}/configure \ + $(HOST_CONFIGARGS) $${srcdiroption} \ || exit 1 +.PHONY: all-bfd maybe-all-bfd +maybe-all-bfd: +all-bfd: configure-bfd + @r=`${PWD_COMMAND}`; export r; \ + s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ + $(SET_LIB_PATH) \ + (cd bfd && $(MAKE) $(FLAGS_TO_PASS) all) -.PHONY: maybe-info-shellutils info-shellutils -maybe-info-shellutils: +.PHONY: check-bfd maybe-check-bfd +maybe-check-bfd: -info-shellutils: \ - configure-shellutils - @[ -f ./shellutils/Makefile ] || exit 0; \ - r=`${PWD_COMMAND}`; export r; \ +check-bfd: + @r=`${PWD_COMMAND}`; export r; \ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ $(SET_LIB_PATH) \ - for flag in $(EXTRA_HOST_FLAGS); do \ - eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \ - done; \ - echo "Doing info in shellutils" ; \ - (cd shellutils && \ - $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \ - "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \ - "RANLIB=$${RANLIB}" \ - "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" \ - info) \ - || exit 1 + (cd bfd && $(MAKE) $(FLAGS_TO_PASS) check) -.PHONY: maybe-info-sid info-sid -maybe-info-sid: +.PHONY: install-bfd maybe-install-bfd +maybe-install-bfd: -info-sid: \ - configure-sid - @[ -f ./sid/Makefile ] || exit 0; \ +install-bfd: installdirs + @r=`${PWD_COMMAND}`; export r; \ + s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ + $(SET_LIB_PATH) \ + (cd bfd && $(MAKE) $(FLAGS_TO_PASS) install) + + +# Other targets (info, dvi, etc.) + +.PHONY: maybe-info-bfd info-bfd +maybe-info-bfd: + +info-bfd: \ + configure-bfd + @[ -f ./bfd/Makefile ] || exit 0; \ r=`${PWD_COMMAND}`; export r; \ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ $(SET_LIB_PATH) \ for flag in $(EXTRA_HOST_FLAGS); do \ eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \ done; \ - echo "Doing info in sid" ; \ - (cd sid && \ + echo "Doing info in bfd" ; \ + (cd bfd && \ $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \ "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \ "RANLIB=$${RANLIB}" \ @@ -1877,218 +3121,263 @@ info-sid: \ || exit 1 -.PHONY: maybe-info-sim info-sim -maybe-info-sim: +.PHONY: maybe-dvi-bfd dvi-bfd +maybe-dvi-bfd: -info-sim: \ - configure-sim - @[ -f ./sim/Makefile ] || exit 0; \ +dvi-bfd: \ + configure-bfd + @[ -f ./bfd/Makefile ] || exit 0; \ r=`${PWD_COMMAND}`; export r; \ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ $(SET_LIB_PATH) \ for flag in $(EXTRA_HOST_FLAGS); do \ eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \ done; \ - echo "Doing info in sim" ; \ - (cd sim && \ + echo "Doing dvi in bfd" ; \ + (cd bfd && \ $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \ "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \ "RANLIB=$${RANLIB}" \ "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" \ - info) \ + dvi) \ || exit 1 -.PHONY: maybe-info-tar info-tar -maybe-info-tar: +.PHONY: maybe-TAGS-bfd TAGS-bfd +maybe-TAGS-bfd: -info-tar: \ - configure-tar - @[ -f ./tar/Makefile ] || exit 0; \ +TAGS-bfd: \ + configure-bfd + @[ -f ./bfd/Makefile ] || exit 0; \ r=`${PWD_COMMAND}`; export r; \ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ $(SET_LIB_PATH) \ for flag in $(EXTRA_HOST_FLAGS); do \ eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \ done; \ - echo "Doing info in tar" ; \ - (cd tar && \ + echo "Doing TAGS in bfd" ; \ + (cd bfd && \ $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \ "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \ "RANLIB=$${RANLIB}" \ "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" \ - info) \ + TAGS) \ || exit 1 -.PHONY: maybe-info-texinfo info-texinfo -maybe-info-texinfo: +.PHONY: maybe-install-info-bfd install-info-bfd +maybe-install-info-bfd: -info-texinfo: \ - configure-texinfo - @[ -f ./texinfo/Makefile ] || exit 0; \ +install-info-bfd: \ + configure-bfd \ + info-bfd + @[ -f ./bfd/Makefile ] || exit 0; \ r=`${PWD_COMMAND}`; export r; \ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ $(SET_LIB_PATH) \ for flag in $(EXTRA_HOST_FLAGS); do \ eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \ done; \ - echo "Doing info in texinfo" ; \ - (cd texinfo && \ + echo "Doing install-info in bfd" ; \ + (cd bfd && \ $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \ "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \ "RANLIB=$${RANLIB}" \ "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" \ - info) \ + install-info) \ || exit 1 -.PHONY: maybe-info-textutils info-textutils -maybe-info-textutils: +.PHONY: maybe-installcheck-bfd installcheck-bfd +maybe-installcheck-bfd: -info-textutils: \ - configure-textutils - @[ -f ./textutils/Makefile ] || exit 0; \ +installcheck-bfd: \ + configure-bfd + @[ -f ./bfd/Makefile ] || exit 0; \ r=`${PWD_COMMAND}`; export r; \ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ $(SET_LIB_PATH) \ for flag in $(EXTRA_HOST_FLAGS); do \ eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \ done; \ - echo "Doing info in textutils" ; \ - (cd textutils && \ + echo "Doing installcheck in bfd" ; \ + (cd bfd && \ $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \ "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \ "RANLIB=$${RANLIB}" \ "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" \ - info) \ + installcheck) \ || exit 1 -.PHONY: maybe-info-time info-time -maybe-info-time: +.PHONY: maybe-mostlyclean-bfd mostlyclean-bfd +maybe-mostlyclean-bfd: -info-time: \ - configure-time - @[ -f ./time/Makefile ] || exit 0; \ +mostlyclean-bfd: + @[ -f ./bfd/Makefile ] || exit 0; \ r=`${PWD_COMMAND}`; export r; \ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ $(SET_LIB_PATH) \ for flag in $(EXTRA_HOST_FLAGS); do \ eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \ done; \ - echo "Doing info in time" ; \ - (cd time && \ + echo "Doing mostlyclean in bfd" ; \ + (cd bfd && \ $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \ "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \ "RANLIB=$${RANLIB}" \ "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" \ - info) \ + mostlyclean) \ || exit 1 -.PHONY: maybe-info-uudecode info-uudecode -maybe-info-uudecode: +.PHONY: maybe-clean-bfd clean-bfd +maybe-clean-bfd: -info-uudecode: \ - configure-uudecode - @[ -f ./uudecode/Makefile ] || exit 0; \ +clean-bfd: + @[ -f ./bfd/Makefile ] || exit 0; \ r=`${PWD_COMMAND}`; export r; \ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ $(SET_LIB_PATH) \ for flag in $(EXTRA_HOST_FLAGS); do \ eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \ done; \ - echo "Doing info in uudecode" ; \ - (cd uudecode && \ + echo "Doing clean in bfd" ; \ + (cd bfd && \ $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \ "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \ "RANLIB=$${RANLIB}" \ "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" \ - info) \ + clean) \ || exit 1 -.PHONY: maybe-info-wdiff info-wdiff -maybe-info-wdiff: +.PHONY: maybe-distclean-bfd distclean-bfd +maybe-distclean-bfd: -info-wdiff: \ - configure-wdiff - @[ -f ./wdiff/Makefile ] || exit 0; \ +distclean-bfd: + @[ -f ./bfd/Makefile ] || exit 0; \ r=`${PWD_COMMAND}`; export r; \ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ $(SET_LIB_PATH) \ for flag in $(EXTRA_HOST_FLAGS); do \ eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \ done; \ - echo "Doing info in wdiff" ; \ - (cd wdiff && \ + echo "Doing distclean in bfd" ; \ + (cd bfd && \ $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \ "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \ "RANLIB=$${RANLIB}" \ "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" \ - info) \ + distclean) \ || exit 1 -.PHONY: maybe-info-zip info-zip -maybe-info-zip: +.PHONY: maybe-maintainer-clean-bfd maintainer-clean-bfd +maybe-maintainer-clean-bfd: -info-zip: \ - configure-zip - @[ -f ./zip/Makefile ] || exit 0; \ +maintainer-clean-bfd: + @[ -f ./bfd/Makefile ] || exit 0; \ r=`${PWD_COMMAND}`; export r; \ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ $(SET_LIB_PATH) \ for flag in $(EXTRA_HOST_FLAGS); do \ eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \ done; \ - echo "Doing info in zip" ; \ - (cd zip && \ + echo "Doing maintainer-clean in bfd" ; \ + (cd bfd && \ $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \ "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \ "RANLIB=$${RANLIB}" \ "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" \ - info) \ + maintainer-clean) \ || exit 1 -.PHONY: maybe-info-zlib info-zlib -maybe-info-zlib: -info-zlib: \ - configure-zlib - @[ -f ./zlib/Makefile ] || exit 0; \ +.PHONY: configure-opcodes maybe-configure-opcodes +maybe-configure-opcodes: +configure-opcodes: + @test ! -f opcodes/Makefile || exit 0; \ + [ -d opcodes ] || mkdir opcodes; \ r=`${PWD_COMMAND}`; export r; \ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ - $(SET_LIB_PATH) \ - for flag in $(EXTRA_HOST_FLAGS); do \ - eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \ - done; \ - echo "Doing info in zlib" ; \ - (cd zlib && \ - $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \ - "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \ - "RANLIB=$${RANLIB}" \ - "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" \ - info) \ + CC="$(CC)"; export CC; \ + CFLAGS="$(CFLAGS)"; export CFLAGS; \ + CONFIG_SHELL="$(SHELL)"; export CONFIG_SHELL; \ + CXX="$(CXX)"; export CXX; \ + CXXFLAGS="$(CXXFLAGS)"; export CXXFLAGS; \ + AR="$(AR)"; export AR; \ + AS="$(AS)"; export AS; \ + CC_FOR_BUILD="$(CC_FOR_BUILD)"; export CC_FOR_BUILD; \ + DLLTOOL="$(DLLTOOL)"; export DLLTOOL; \ + LD="$(LD)"; export LD; \ + NM="$(NM)"; export NM; \ + RANLIB="$(RANLIB)"; export RANLIB; \ + WINDRES="$(WINDRES)"; export WINDRES; \ + OBJCOPY="$(OBJCOPY)"; export OBJCOPY; \ + OBJDUMP="$(OBJDUMP)"; export OBJDUMP; \ + echo Configuring in opcodes; \ + cd opcodes || exit 1; \ + case $(srcdir) in \ + \.) \ + srcdiroption="--srcdir=."; \ + libsrcdir=".";; \ + /* | [A-Za-z]:[\\/]*) \ + srcdiroption="--srcdir=$(srcdir)/opcodes"; \ + libsrcdir="$$s/opcodes";; \ + *) \ + srcdiroption="--srcdir=../$(srcdir)/opcodes"; \ + libsrcdir="$$s/opcodes";; \ + esac; \ + $(SHELL) $${libsrcdir}/configure \ + $(HOST_CONFIGARGS) $${srcdiroption} \ || exit 1 +.PHONY: all-opcodes maybe-all-opcodes +maybe-all-opcodes: +all-opcodes: configure-opcodes + @r=`${PWD_COMMAND}`; export r; \ + s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ + $(SET_LIB_PATH) \ + (cd opcodes && $(MAKE) $(FLAGS_TO_PASS) all) -.PHONY: maybe-info-gdb info-gdb -maybe-info-gdb: +.PHONY: check-opcodes maybe-check-opcodes +maybe-check-opcodes: -info-gdb: \ - configure-gdb - @[ -f ./gdb/Makefile ] || exit 0; \ +check-opcodes: + @r=`${PWD_COMMAND}`; export r; \ + s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ + $(SET_LIB_PATH) \ + (cd opcodes && $(MAKE) $(FLAGS_TO_PASS) check) + + +.PHONY: install-opcodes maybe-install-opcodes +maybe-install-opcodes: + +install-opcodes: installdirs + @r=`${PWD_COMMAND}`; export r; \ + s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ + $(SET_LIB_PATH) \ + (cd opcodes && $(MAKE) $(FLAGS_TO_PASS) install) + + +# Other targets (info, dvi, etc.) + +.PHONY: maybe-info-opcodes info-opcodes +maybe-info-opcodes: + +info-opcodes: \ + configure-opcodes + @[ -f ./opcodes/Makefile ] || exit 0; \ r=`${PWD_COMMAND}`; export r; \ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ $(SET_LIB_PATH) \ for flag in $(EXTRA_HOST_FLAGS); do \ eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \ done; \ - echo "Doing info in gdb" ; \ - (cd gdb && \ + echo "Doing info in opcodes" ; \ + (cd opcodes && \ $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \ "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \ "RANLIB=$${RANLIB}" \ @@ -2097,265 +3386,263 @@ info-gdb: \ || exit 1 -.PHONY: maybe-info-expect info-expect -maybe-info-expect: +.PHONY: maybe-dvi-opcodes dvi-opcodes +maybe-dvi-opcodes: -info-expect: \ - configure-expect - @[ -f ./expect/Makefile ] || exit 0; \ +dvi-opcodes: \ + configure-opcodes + @[ -f ./opcodes/Makefile ] || exit 0; \ r=`${PWD_COMMAND}`; export r; \ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ $(SET_LIB_PATH) \ for flag in $(EXTRA_HOST_FLAGS); do \ eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \ done; \ - echo "Doing info in expect" ; \ - (cd expect && \ + echo "Doing dvi in opcodes" ; \ + (cd opcodes && \ $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \ "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \ "RANLIB=$${RANLIB}" \ "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" \ - info) \ + dvi) \ || exit 1 -.PHONY: maybe-info-guile info-guile -maybe-info-guile: +.PHONY: maybe-TAGS-opcodes TAGS-opcodes +maybe-TAGS-opcodes: -info-guile: \ - configure-guile - @[ -f ./guile/Makefile ] || exit 0; \ +TAGS-opcodes: \ + configure-opcodes + @[ -f ./opcodes/Makefile ] || exit 0; \ r=`${PWD_COMMAND}`; export r; \ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ $(SET_LIB_PATH) \ for flag in $(EXTRA_HOST_FLAGS); do \ eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \ done; \ - echo "Doing info in guile" ; \ - (cd guile && \ + echo "Doing TAGS in opcodes" ; \ + (cd opcodes && \ $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \ "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \ "RANLIB=$${RANLIB}" \ "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" \ - info) \ + TAGS) \ || exit 1 -.PHONY: maybe-info-tk info-tk -maybe-info-tk: +.PHONY: maybe-install-info-opcodes install-info-opcodes +maybe-install-info-opcodes: -info-tk: \ - configure-tk - @[ -f ./tk/Makefile ] || exit 0; \ +install-info-opcodes: \ + configure-opcodes \ + info-opcodes + @[ -f ./opcodes/Makefile ] || exit 0; \ r=`${PWD_COMMAND}`; export r; \ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ $(SET_LIB_PATH) \ for flag in $(EXTRA_HOST_FLAGS); do \ eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \ done; \ - echo "Doing info in tk" ; \ - (cd tk && \ + echo "Doing install-info in opcodes" ; \ + (cd opcodes && \ $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \ "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \ "RANLIB=$${RANLIB}" \ "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" \ - info) \ + install-info) \ || exit 1 -.PHONY: maybe-info-tix info-tix -maybe-info-tix: +.PHONY: maybe-installcheck-opcodes installcheck-opcodes +maybe-installcheck-opcodes: -info-tix: \ - configure-tix - @[ -f ./tix/Makefile ] || exit 0; \ +installcheck-opcodes: \ + configure-opcodes + @[ -f ./opcodes/Makefile ] || exit 0; \ r=`${PWD_COMMAND}`; export r; \ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ $(SET_LIB_PATH) \ for flag in $(EXTRA_HOST_FLAGS); do \ eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \ done; \ - echo "Doing info in tix" ; \ - (cd tix && \ + echo "Doing installcheck in opcodes" ; \ + (cd opcodes && \ $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \ "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \ "RANLIB=$${RANLIB}" \ "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" \ - info) \ + installcheck) \ || exit 1 -.PHONY: maybe-info-libtermcap info-libtermcap -maybe-info-libtermcap: +.PHONY: maybe-mostlyclean-opcodes mostlyclean-opcodes +maybe-mostlyclean-opcodes: -info-libtermcap: \ - configure-libtermcap - @[ -f ./libtermcap/Makefile ] || exit 0; \ +mostlyclean-opcodes: + @[ -f ./opcodes/Makefile ] || exit 0; \ r=`${PWD_COMMAND}`; export r; \ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ $(SET_LIB_PATH) \ for flag in $(EXTRA_HOST_FLAGS); do \ eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \ done; \ - echo "Doing info in libtermcap" ; \ - (cd libtermcap && \ + echo "Doing mostlyclean in opcodes" ; \ + (cd opcodes && \ $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \ "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \ "RANLIB=$${RANLIB}" \ "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" \ - info) \ + mostlyclean) \ || exit 1 -.PHONY: maybe-info-utils info-utils -maybe-info-utils: +.PHONY: maybe-clean-opcodes clean-opcodes +maybe-clean-opcodes: -info-utils: \ - configure-utils - @[ -f ./utils/Makefile ] || exit 0; \ +clean-opcodes: + @[ -f ./opcodes/Makefile ] || exit 0; \ r=`${PWD_COMMAND}`; export r; \ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ $(SET_LIB_PATH) \ for flag in $(EXTRA_HOST_FLAGS); do \ eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \ done; \ - echo "Doing info in utils" ; \ - (cd utils && \ + echo "Doing clean in opcodes" ; \ + (cd opcodes && \ $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \ "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \ "RANLIB=$${RANLIB}" \ "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" \ - info) \ + clean) \ || exit 1 +.PHONY: maybe-distclean-opcodes distclean-opcodes +maybe-distclean-opcodes: -# Target modules. - -.PHONY: maybe-info-target-libstdc++-v3 info-target-libstdc++-v3 -maybe-info-target-libstdc++-v3: - -info-target-libstdc++-v3: \ - configure-target-libstdc++-v3 - @[ -f $(TARGET_SUBDIR)/libstdc++-v3/Makefile ] || exit 0 ; \ +distclean-opcodes: + @[ -f ./opcodes/Makefile ] || exit 0; \ r=`${PWD_COMMAND}`; export r; \ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ $(SET_LIB_PATH) \ - echo "Doing info in $(TARGET_SUBDIR)/libstdc++-v3" ; \ - for flag in $(EXTRA_TARGET_FLAGS); do \ + for flag in $(EXTRA_HOST_FLAGS); do \ eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \ done; \ - (cd $(TARGET_SUBDIR)/libstdc++-v3 && \ + echo "Doing distclean in opcodes" ; \ + (cd opcodes && \ $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \ "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \ "RANLIB=$${RANLIB}" \ "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" \ - info) \ + distclean) \ || exit 1 -.PHONY: maybe-info-target-newlib info-target-newlib -maybe-info-target-newlib: +.PHONY: maybe-maintainer-clean-opcodes maintainer-clean-opcodes +maybe-maintainer-clean-opcodes: -info-target-newlib: \ - configure-target-newlib - @[ -f $(TARGET_SUBDIR)/newlib/Makefile ] || exit 0 ; \ +maintainer-clean-opcodes: + @[ -f ./opcodes/Makefile ] || exit 0; \ r=`${PWD_COMMAND}`; export r; \ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ $(SET_LIB_PATH) \ - echo "Doing info in $(TARGET_SUBDIR)/newlib" ; \ - for flag in $(EXTRA_TARGET_FLAGS); do \ + for flag in $(EXTRA_HOST_FLAGS); do \ eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \ done; \ - (cd $(TARGET_SUBDIR)/newlib && \ + echo "Doing maintainer-clean in opcodes" ; \ + (cd opcodes && \ $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \ "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \ "RANLIB=$${RANLIB}" \ "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" \ - info) \ + maintainer-clean) \ || exit 1 -.PHONY: maybe-info-target-libf2c info-target-libf2c -maybe-info-target-libf2c: -info-target-libf2c: \ - configure-target-libf2c - @[ -f $(TARGET_SUBDIR)/libf2c/Makefile ] || exit 0 ; \ +.PHONY: configure-binutils maybe-configure-binutils +maybe-configure-binutils: +configure-binutils: + @test ! -f binutils/Makefile || exit 0; \ + [ -d binutils ] || mkdir binutils; \ r=`${PWD_COMMAND}`; export r; \ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ - $(SET_LIB_PATH) \ - echo "Doing info in $(TARGET_SUBDIR)/libf2c" ; \ - for flag in $(EXTRA_TARGET_FLAGS); do \ - eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \ - done; \ - (cd $(TARGET_SUBDIR)/libf2c && \ - $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \ - "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \ - "RANLIB=$${RANLIB}" \ - "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" \ - info) \ + CC="$(CC)"; export CC; \ + CFLAGS="$(CFLAGS)"; export CFLAGS; \ + CONFIG_SHELL="$(SHELL)"; export CONFIG_SHELL; \ + CXX="$(CXX)"; export CXX; \ + CXXFLAGS="$(CXXFLAGS)"; export CXXFLAGS; \ + AR="$(AR)"; export AR; \ + AS="$(AS)"; export AS; \ + CC_FOR_BUILD="$(CC_FOR_BUILD)"; export CC_FOR_BUILD; \ + DLLTOOL="$(DLLTOOL)"; export DLLTOOL; \ + LD="$(LD)"; export LD; \ + NM="$(NM)"; export NM; \ + RANLIB="$(RANLIB)"; export RANLIB; \ + WINDRES="$(WINDRES)"; export WINDRES; \ + OBJCOPY="$(OBJCOPY)"; export OBJCOPY; \ + OBJDUMP="$(OBJDUMP)"; export OBJDUMP; \ + echo Configuring in binutils; \ + cd binutils || exit 1; \ + case $(srcdir) in \ + \.) \ + srcdiroption="--srcdir=."; \ + libsrcdir=".";; \ + /* | [A-Za-z]:[\\/]*) \ + srcdiroption="--srcdir=$(srcdir)/binutils"; \ + libsrcdir="$$s/binutils";; \ + *) \ + srcdiroption="--srcdir=../$(srcdir)/binutils"; \ + libsrcdir="$$s/binutils";; \ + esac; \ + $(SHELL) $${libsrcdir}/configure \ + $(HOST_CONFIGARGS) $${srcdiroption} \ || exit 1 +.PHONY: all-binutils maybe-all-binutils +maybe-all-binutils: +all-binutils: configure-binutils + @r=`${PWD_COMMAND}`; export r; \ + s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ + $(SET_LIB_PATH) \ + (cd binutils && $(MAKE) $(FLAGS_TO_PASS) all) -.PHONY: maybe-info-target-libobjc info-target-libobjc -maybe-info-target-libobjc: +.PHONY: check-binutils maybe-check-binutils +maybe-check-binutils: -info-target-libobjc: \ - configure-target-libobjc - @[ -f $(TARGET_SUBDIR)/libobjc/Makefile ] || exit 0 ; \ - r=`${PWD_COMMAND}`; export r; \ +check-binutils: + @r=`${PWD_COMMAND}`; export r; \ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ $(SET_LIB_PATH) \ - echo "Doing info in $(TARGET_SUBDIR)/libobjc" ; \ - for flag in $(EXTRA_TARGET_FLAGS); do \ - eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \ - done; \ - (cd $(TARGET_SUBDIR)/libobjc && \ - $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \ - "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \ - "RANLIB=$${RANLIB}" \ - "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" \ - info) \ - || exit 1 + (cd binutils && $(MAKE) $(FLAGS_TO_PASS) check) -.PHONY: maybe-info-target-libtermcap info-target-libtermcap -maybe-info-target-libtermcap: +.PHONY: install-binutils maybe-install-binutils +maybe-install-binutils: -info-target-libtermcap: \ - configure-target-libtermcap - @[ -f $(TARGET_SUBDIR)/libtermcap/Makefile ] || exit 0 ; \ - r=`${PWD_COMMAND}`; export r; \ +install-binutils: installdirs + @r=`${PWD_COMMAND}`; export r; \ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ $(SET_LIB_PATH) \ - echo "Doing info in $(TARGET_SUBDIR)/libtermcap" ; \ - for flag in $(EXTRA_TARGET_FLAGS); do \ - eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \ - done; \ - (cd $(TARGET_SUBDIR)/libtermcap && \ - $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \ - "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \ - "RANLIB=$${RANLIB}" \ - "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" \ - info) \ - || exit 1 + (cd binutils && $(MAKE) $(FLAGS_TO_PASS) install) -.PHONY: maybe-info-target-winsup info-target-winsup -maybe-info-target-winsup: +# Other targets (info, dvi, etc.) -info-target-winsup: \ - configure-target-winsup - @[ -f $(TARGET_SUBDIR)/winsup/Makefile ] || exit 0 ; \ +.PHONY: maybe-info-binutils info-binutils +maybe-info-binutils: + +info-binutils: \ + configure-binutils + @[ -f ./binutils/Makefile ] || exit 0; \ r=`${PWD_COMMAND}`; export r; \ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ $(SET_LIB_PATH) \ - echo "Doing info in $(TARGET_SUBDIR)/winsup" ; \ - for flag in $(EXTRA_TARGET_FLAGS); do \ + for flag in $(EXTRA_HOST_FLAGS); do \ eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \ done; \ - (cd $(TARGET_SUBDIR)/winsup && \ + echo "Doing info in binutils" ; \ + (cd binutils && \ $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \ "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \ "RANLIB=$${RANLIB}" \ @@ -2364,240 +3651,266 @@ info-target-winsup: \ || exit 1 -.PHONY: maybe-info-target-libgloss info-target-libgloss -maybe-info-target-libgloss: +.PHONY: maybe-dvi-binutils dvi-binutils +maybe-dvi-binutils: -info-target-libgloss: \ - configure-target-libgloss - @[ -f $(TARGET_SUBDIR)/libgloss/Makefile ] || exit 0 ; \ +dvi-binutils: \ + configure-binutils + @[ -f ./binutils/Makefile ] || exit 0; \ r=`${PWD_COMMAND}`; export r; \ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ $(SET_LIB_PATH) \ - echo "Doing info in $(TARGET_SUBDIR)/libgloss" ; \ - for flag in $(EXTRA_TARGET_FLAGS); do \ + for flag in $(EXTRA_HOST_FLAGS); do \ eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \ done; \ - (cd $(TARGET_SUBDIR)/libgloss && \ + echo "Doing dvi in binutils" ; \ + (cd binutils && \ $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \ "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \ "RANLIB=$${RANLIB}" \ "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" \ - info) \ + dvi) \ || exit 1 -.PHONY: maybe-info-target-libiberty info-target-libiberty -maybe-info-target-libiberty: +.PHONY: maybe-TAGS-binutils TAGS-binutils +maybe-TAGS-binutils: -info-target-libiberty: \ - configure-target-libiberty - @[ -f $(TARGET_SUBDIR)/libiberty/Makefile ] || exit 0 ; \ +TAGS-binutils: \ + configure-binutils + @[ -f ./binutils/Makefile ] || exit 0; \ r=`${PWD_COMMAND}`; export r; \ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ $(SET_LIB_PATH) \ - echo "Doing info in $(TARGET_SUBDIR)/libiberty" ; \ - for flag in $(EXTRA_TARGET_FLAGS); do \ + for flag in $(EXTRA_HOST_FLAGS); do \ eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \ done; \ - (cd $(TARGET_SUBDIR)/libiberty && \ + echo "Doing TAGS in binutils" ; \ + (cd binutils && \ $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \ "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \ "RANLIB=$${RANLIB}" \ "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" \ - info) \ + TAGS) \ || exit 1 -.PHONY: maybe-info-target-gperf info-target-gperf -maybe-info-target-gperf: +.PHONY: maybe-install-info-binutils install-info-binutils +maybe-install-info-binutils: -info-target-gperf: \ - configure-target-gperf - @[ -f $(TARGET_SUBDIR)/gperf/Makefile ] || exit 0 ; \ +install-info-binutils: \ + configure-binutils \ + info-binutils + @[ -f ./binutils/Makefile ] || exit 0; \ r=`${PWD_COMMAND}`; export r; \ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ $(SET_LIB_PATH) \ - echo "Doing info in $(TARGET_SUBDIR)/gperf" ; \ - for flag in $(EXTRA_TARGET_FLAGS); do \ + for flag in $(EXTRA_HOST_FLAGS); do \ eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \ done; \ - (cd $(TARGET_SUBDIR)/gperf && \ + echo "Doing install-info in binutils" ; \ + (cd binutils && \ $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \ "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \ "RANLIB=$${RANLIB}" \ "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" \ - info) \ + install-info) \ || exit 1 -.PHONY: maybe-info-target-examples info-target-examples -maybe-info-target-examples: +.PHONY: maybe-installcheck-binutils installcheck-binutils +maybe-installcheck-binutils: -info-target-examples: \ - configure-target-examples - @[ -f $(TARGET_SUBDIR)/examples/Makefile ] || exit 0 ; \ +installcheck-binutils: \ + configure-binutils + @[ -f ./binutils/Makefile ] || exit 0; \ r=`${PWD_COMMAND}`; export r; \ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ $(SET_LIB_PATH) \ - echo "Doing info in $(TARGET_SUBDIR)/examples" ; \ - for flag in $(EXTRA_TARGET_FLAGS); do \ + for flag in $(EXTRA_HOST_FLAGS); do \ eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \ done; \ - (cd $(TARGET_SUBDIR)/examples && \ + echo "Doing installcheck in binutils" ; \ + (cd binutils && \ $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \ "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \ "RANLIB=$${RANLIB}" \ "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" \ - info) \ + installcheck) \ || exit 1 -.PHONY: maybe-info-target-libffi info-target-libffi -maybe-info-target-libffi: +.PHONY: maybe-mostlyclean-binutils mostlyclean-binutils +maybe-mostlyclean-binutils: -info-target-libffi: \ - configure-target-libffi - @[ -f $(TARGET_SUBDIR)/libffi/Makefile ] || exit 0 ; \ +mostlyclean-binutils: + @[ -f ./binutils/Makefile ] || exit 0; \ r=`${PWD_COMMAND}`; export r; \ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ $(SET_LIB_PATH) \ - echo "Doing info in $(TARGET_SUBDIR)/libffi" ; \ - for flag in $(EXTRA_TARGET_FLAGS); do \ + for flag in $(EXTRA_HOST_FLAGS); do \ eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \ done; \ - (cd $(TARGET_SUBDIR)/libffi && \ + echo "Doing mostlyclean in binutils" ; \ + (cd binutils && \ $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \ "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \ "RANLIB=$${RANLIB}" \ "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" \ - info) \ + mostlyclean) \ || exit 1 -.PHONY: maybe-info-target-libjava info-target-libjava -maybe-info-target-libjava: +.PHONY: maybe-clean-binutils clean-binutils +maybe-clean-binutils: -info-target-libjava: \ - configure-target-libjava - @[ -f $(TARGET_SUBDIR)/libjava/Makefile ] || exit 0 ; \ +clean-binutils: + @[ -f ./binutils/Makefile ] || exit 0; \ r=`${PWD_COMMAND}`; export r; \ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ $(SET_LIB_PATH) \ - echo "Doing info in $(TARGET_SUBDIR)/libjava" ; \ - for flag in $(EXTRA_TARGET_FLAGS); do \ + for flag in $(EXTRA_HOST_FLAGS); do \ eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \ done; \ - (cd $(TARGET_SUBDIR)/libjava && \ + echo "Doing clean in binutils" ; \ + (cd binutils && \ $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \ "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \ "RANLIB=$${RANLIB}" \ "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" \ - info) \ + clean) \ || exit 1 -.PHONY: maybe-info-target-zlib info-target-zlib -maybe-info-target-zlib: +.PHONY: maybe-distclean-binutils distclean-binutils +maybe-distclean-binutils: -info-target-zlib: \ - configure-target-zlib - @[ -f $(TARGET_SUBDIR)/zlib/Makefile ] || exit 0 ; \ +distclean-binutils: + @[ -f ./binutils/Makefile ] || exit 0; \ r=`${PWD_COMMAND}`; export r; \ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ $(SET_LIB_PATH) \ - echo "Doing info in $(TARGET_SUBDIR)/zlib" ; \ - for flag in $(EXTRA_TARGET_FLAGS); do \ + for flag in $(EXTRA_HOST_FLAGS); do \ eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \ done; \ - (cd $(TARGET_SUBDIR)/zlib && \ + echo "Doing distclean in binutils" ; \ + (cd binutils && \ $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \ "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \ "RANLIB=$${RANLIB}" \ "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" \ - info) \ + distclean) \ || exit 1 -.PHONY: maybe-info-target-boehm-gc info-target-boehm-gc -maybe-info-target-boehm-gc: +.PHONY: maybe-maintainer-clean-binutils maintainer-clean-binutils +maybe-maintainer-clean-binutils: -info-target-boehm-gc: \ - configure-target-boehm-gc - @[ -f $(TARGET_SUBDIR)/boehm-gc/Makefile ] || exit 0 ; \ +maintainer-clean-binutils: + @[ -f ./binutils/Makefile ] || exit 0; \ r=`${PWD_COMMAND}`; export r; \ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ $(SET_LIB_PATH) \ - echo "Doing info in $(TARGET_SUBDIR)/boehm-gc" ; \ - for flag in $(EXTRA_TARGET_FLAGS); do \ + for flag in $(EXTRA_HOST_FLAGS); do \ eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \ done; \ - (cd $(TARGET_SUBDIR)/boehm-gc && \ + echo "Doing maintainer-clean in binutils" ; \ + (cd binutils && \ $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \ "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \ "RANLIB=$${RANLIB}" \ "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" \ - info) \ + maintainer-clean) \ || exit 1 -.PHONY: maybe-info-target-qthreads info-target-qthreads -maybe-info-target-qthreads: -info-target-qthreads: \ - configure-target-qthreads - @[ -f $(TARGET_SUBDIR)/qthreads/Makefile ] || exit 0 ; \ +.PHONY: configure-bison maybe-configure-bison +maybe-configure-bison: +configure-bison: + @test ! -f bison/Makefile || exit 0; \ + [ -d bison ] || mkdir bison; \ r=`${PWD_COMMAND}`; export r; \ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ - $(SET_LIB_PATH) \ - echo "Doing info in $(TARGET_SUBDIR)/qthreads" ; \ - for flag in $(EXTRA_TARGET_FLAGS); do \ - eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \ - done; \ - (cd $(TARGET_SUBDIR)/qthreads && \ - $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \ - "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \ - "RANLIB=$${RANLIB}" \ - "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" \ - info) \ + CC="$(CC)"; export CC; \ + CFLAGS="$(CFLAGS)"; export CFLAGS; \ + CONFIG_SHELL="$(SHELL)"; export CONFIG_SHELL; \ + CXX="$(CXX)"; export CXX; \ + CXXFLAGS="$(CXXFLAGS)"; export CXXFLAGS; \ + AR="$(AR)"; export AR; \ + AS="$(AS)"; export AS; \ + CC_FOR_BUILD="$(CC_FOR_BUILD)"; export CC_FOR_BUILD; \ + DLLTOOL="$(DLLTOOL)"; export DLLTOOL; \ + LD="$(LD)"; export LD; \ + NM="$(NM)"; export NM; \ + RANLIB="$(RANLIB)"; export RANLIB; \ + WINDRES="$(WINDRES)"; export WINDRES; \ + OBJCOPY="$(OBJCOPY)"; export OBJCOPY; \ + OBJDUMP="$(OBJDUMP)"; export OBJDUMP; \ + echo Configuring in bison; \ + cd bison || exit 1; \ + case $(srcdir) in \ + \.) \ + srcdiroption="--srcdir=."; \ + libsrcdir=".";; \ + /* | [A-Za-z]:[\\/]*) \ + srcdiroption="--srcdir=$(srcdir)/bison"; \ + libsrcdir="$$s/bison";; \ + *) \ + srcdiroption="--srcdir=../$(srcdir)/bison"; \ + libsrcdir="$$s/bison";; \ + esac; \ + $(SHELL) $${libsrcdir}/configure \ + $(HOST_CONFIGARGS) $${srcdiroption} \ || exit 1 +.PHONY: all-bison maybe-all-bison +maybe-all-bison: +all-bison: configure-bison + @r=`${PWD_COMMAND}`; export r; \ + s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ + $(SET_LIB_PATH) \ + (cd bison && $(MAKE) $(FLAGS_TO_PASS) all) -.PHONY: maybe-info-target-rda info-target-rda -maybe-info-target-rda: +.PHONY: check-bison maybe-check-bison +maybe-check-bison: -info-target-rda: \ - configure-target-rda - @[ -f $(TARGET_SUBDIR)/rda/Makefile ] || exit 0 ; \ - r=`${PWD_COMMAND}`; export r; \ +# This module is only tested in a native toolchain. +check-bison: + @if [ '$(host)' = '$(target)' ] ; then \ + r=`${PWD_COMMAND}`; export r; \ + s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ + $(SET_LIB_PATH) \ + (cd bison && $(MAKE) $(FLAGS_TO_PASS) check); \ + fi + + +.PHONY: install-bison maybe-install-bison +maybe-install-bison: + +install-bison: installdirs + @r=`${PWD_COMMAND}`; export r; \ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ $(SET_LIB_PATH) \ - echo "Doing info in $(TARGET_SUBDIR)/rda" ; \ - for flag in $(EXTRA_TARGET_FLAGS); do \ - eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \ - done; \ - (cd $(TARGET_SUBDIR)/rda && \ - $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \ - "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \ - "RANLIB=$${RANLIB}" \ - "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" \ - info) \ - || exit 1 + (cd bison && $(MAKE) $(FLAGS_TO_PASS) install) -.PHONY: maybe-info-target-libada info-target-libada -maybe-info-target-libada: +# Other targets (info, dvi, etc.) -info-target-libada: \ - configure-target-libada - @[ -f $(TARGET_SUBDIR)/libada/Makefile ] || exit 0 ; \ +.PHONY: maybe-info-bison info-bison +maybe-info-bison: + +info-bison: \ + configure-bison + @[ -f ./bison/Makefile ] || exit 0; \ r=`${PWD_COMMAND}`; export r; \ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ $(SET_LIB_PATH) \ - echo "Doing info in $(TARGET_SUBDIR)/libada" ; \ - for flag in $(EXTRA_TARGET_FLAGS); do \ + for flag in $(EXTRA_HOST_FLAGS); do \ eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \ done; \ - (cd $(TARGET_SUBDIR)/libada && \ + echo "Doing info in bison" ; \ + (cd bison && \ $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \ "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \ "RANLIB=$${RANLIB}" \ @@ -2606,111 +3919,20 @@ info-target-libada: \ || exit 1 +.PHONY: maybe-dvi-bison dvi-bison +maybe-dvi-bison: -.PHONY: do-dvi -do-dvi: dvi-host dvi-target - -.PHONY: dvi-host -dvi-host: maybe-dvi-gcc \ - maybe-dvi-ash \ - maybe-dvi-autoconf \ - maybe-dvi-automake \ - maybe-dvi-bash \ - maybe-dvi-bfd \ - maybe-dvi-opcodes \ - maybe-dvi-binutils \ - maybe-dvi-bison \ - maybe-dvi-byacc \ - maybe-dvi-bzip2 \ - maybe-dvi-dejagnu \ - maybe-dvi-diff \ - maybe-dvi-dosutils \ - maybe-dvi-etc \ - maybe-dvi-fastjar \ - maybe-dvi-fileutils \ - maybe-dvi-findutils \ - maybe-dvi-find \ - maybe-dvi-flex \ - maybe-dvi-gas \ - maybe-dvi-gawk \ - maybe-dvi-gettext \ - maybe-dvi-gnuserv \ - maybe-dvi-gprof \ - maybe-dvi-gzip \ - maybe-dvi-hello \ - maybe-dvi-indent \ - maybe-dvi-intl \ - maybe-dvi-tcl \ - maybe-dvi-itcl \ - maybe-dvi-ld \ - maybe-dvi-libgui \ - maybe-dvi-libiberty \ - maybe-dvi-libtool \ - maybe-dvi-m4 \ - maybe-dvi-make \ - maybe-dvi-mmalloc \ - maybe-dvi-patch \ - maybe-dvi-perl \ - maybe-dvi-prms \ - maybe-dvi-rcs \ - maybe-dvi-readline \ - maybe-dvi-release \ - maybe-dvi-recode \ - maybe-dvi-sed \ - maybe-dvi-send-pr \ - maybe-dvi-shellutils \ - maybe-dvi-sid \ - maybe-dvi-sim \ - maybe-dvi-tar \ - maybe-dvi-texinfo \ - maybe-dvi-textutils \ - maybe-dvi-time \ - maybe-dvi-uudecode \ - maybe-dvi-wdiff \ - maybe-dvi-zip \ - maybe-dvi-zlib \ - maybe-dvi-gdb \ - maybe-dvi-expect \ - maybe-dvi-guile \ - maybe-dvi-tk \ - maybe-dvi-tix \ - maybe-dvi-libtermcap \ - maybe-dvi-utils - -.PHONY: dvi-target -dvi-target: \ - maybe-dvi-target-libstdc++-v3 \ - maybe-dvi-target-newlib \ - maybe-dvi-target-libf2c \ - maybe-dvi-target-libobjc \ - maybe-dvi-target-libtermcap \ - maybe-dvi-target-winsup \ - maybe-dvi-target-libgloss \ - maybe-dvi-target-libiberty \ - maybe-dvi-target-gperf \ - maybe-dvi-target-examples \ - maybe-dvi-target-libffi \ - maybe-dvi-target-libjava \ - maybe-dvi-target-zlib \ - maybe-dvi-target-boehm-gc \ - maybe-dvi-target-qthreads \ - maybe-dvi-target-rda \ - maybe-dvi-target-libada - -# GCC, the eternal special case -.PHONY: maybe-dvi-gcc dvi-gcc -maybe-dvi-gcc: -dvi-gcc: \ - configure-gcc - @[ -f ./gcc/Makefile ] || exit 0; \ +dvi-bison: \ + configure-bison + @[ -f ./bison/Makefile ] || exit 0; \ r=`${PWD_COMMAND}`; export r; \ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ $(SET_LIB_PATH) \ - for flag in $(EXTRA_GCC_FLAGS); do \ + for flag in $(EXTRA_HOST_FLAGS); do \ eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \ done; \ - echo "Doing dvi in gcc" ; \ - (cd gcc && \ + echo "Doing dvi in bison" ; \ + (cd bison && \ $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \ "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \ "RANLIB=$${RANLIB}" \ @@ -2718,181 +3940,250 @@ dvi-gcc: \ dvi) \ || exit 1 -# Host modules. -.PHONY: maybe-dvi-ash dvi-ash -maybe-dvi-ash: +.PHONY: maybe-TAGS-bison TAGS-bison +maybe-TAGS-bison: -dvi-ash: \ - configure-ash - @[ -f ./ash/Makefile ] || exit 0; \ +TAGS-bison: \ + configure-bison + @[ -f ./bison/Makefile ] || exit 0; \ r=`${PWD_COMMAND}`; export r; \ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ $(SET_LIB_PATH) \ for flag in $(EXTRA_HOST_FLAGS); do \ eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \ done; \ - echo "Doing dvi in ash" ; \ - (cd ash && \ + echo "Doing TAGS in bison" ; \ + (cd bison && \ $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \ "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \ "RANLIB=$${RANLIB}" \ "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" \ - dvi) \ + TAGS) \ || exit 1 -.PHONY: maybe-dvi-autoconf dvi-autoconf -maybe-dvi-autoconf: +.PHONY: maybe-install-info-bison install-info-bison +maybe-install-info-bison: -dvi-autoconf: \ - configure-autoconf - @[ -f ./autoconf/Makefile ] || exit 0; \ +install-info-bison: \ + configure-bison \ + info-bison + @[ -f ./bison/Makefile ] || exit 0; \ r=`${PWD_COMMAND}`; export r; \ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ $(SET_LIB_PATH) \ for flag in $(EXTRA_HOST_FLAGS); do \ eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \ done; \ - echo "Doing dvi in autoconf" ; \ - (cd autoconf && \ + echo "Doing install-info in bison" ; \ + (cd bison && \ $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \ "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \ "RANLIB=$${RANLIB}" \ "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" \ - dvi) \ + install-info) \ || exit 1 -.PHONY: maybe-dvi-automake dvi-automake -maybe-dvi-automake: +.PHONY: maybe-installcheck-bison installcheck-bison +maybe-installcheck-bison: -dvi-automake: \ - configure-automake - @[ -f ./automake/Makefile ] || exit 0; \ +installcheck-bison: \ + configure-bison + @[ -f ./bison/Makefile ] || exit 0; \ r=`${PWD_COMMAND}`; export r; \ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ $(SET_LIB_PATH) \ for flag in $(EXTRA_HOST_FLAGS); do \ eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \ done; \ - echo "Doing dvi in automake" ; \ - (cd automake && \ + echo "Doing installcheck in bison" ; \ + (cd bison && \ $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \ "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \ "RANLIB=$${RANLIB}" \ "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" \ - dvi) \ + installcheck) \ || exit 1 -.PHONY: maybe-dvi-bash dvi-bash -maybe-dvi-bash: +.PHONY: maybe-mostlyclean-bison mostlyclean-bison +maybe-mostlyclean-bison: -dvi-bash: \ - configure-bash - @[ -f ./bash/Makefile ] || exit 0; \ +mostlyclean-bison: + @[ -f ./bison/Makefile ] || exit 0; \ r=`${PWD_COMMAND}`; export r; \ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ $(SET_LIB_PATH) \ for flag in $(EXTRA_HOST_FLAGS); do \ eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \ done; \ - echo "Doing dvi in bash" ; \ - (cd bash && \ + echo "Doing mostlyclean in bison" ; \ + (cd bison && \ $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \ "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \ "RANLIB=$${RANLIB}" \ "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" \ - dvi) \ + mostlyclean) \ || exit 1 -.PHONY: maybe-dvi-bfd dvi-bfd -maybe-dvi-bfd: +.PHONY: maybe-clean-bison clean-bison +maybe-clean-bison: -dvi-bfd: \ - configure-bfd - @[ -f ./bfd/Makefile ] || exit 0; \ +clean-bison: + @[ -f ./bison/Makefile ] || exit 0; \ r=`${PWD_COMMAND}`; export r; \ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ $(SET_LIB_PATH) \ for flag in $(EXTRA_HOST_FLAGS); do \ eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \ done; \ - echo "Doing dvi in bfd" ; \ - (cd bfd && \ + echo "Doing clean in bison" ; \ + (cd bison && \ $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \ "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \ "RANLIB=$${RANLIB}" \ "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" \ - dvi) \ + clean) \ || exit 1 -.PHONY: maybe-dvi-opcodes dvi-opcodes -maybe-dvi-opcodes: +.PHONY: maybe-distclean-bison distclean-bison +maybe-distclean-bison: -dvi-opcodes: \ - configure-opcodes - @[ -f ./opcodes/Makefile ] || exit 0; \ +distclean-bison: + @[ -f ./bison/Makefile ] || exit 0; \ r=`${PWD_COMMAND}`; export r; \ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ $(SET_LIB_PATH) \ for flag in $(EXTRA_HOST_FLAGS); do \ eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \ done; \ - echo "Doing dvi in opcodes" ; \ - (cd opcodes && \ + echo "Doing distclean in bison" ; \ + (cd bison && \ $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \ "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \ "RANLIB=$${RANLIB}" \ "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" \ - dvi) \ + distclean) \ || exit 1 -.PHONY: maybe-dvi-binutils dvi-binutils -maybe-dvi-binutils: +.PHONY: maybe-maintainer-clean-bison maintainer-clean-bison +maybe-maintainer-clean-bison: -dvi-binutils: \ - configure-binutils - @[ -f ./binutils/Makefile ] || exit 0; \ +maintainer-clean-bison: + @[ -f ./bison/Makefile ] || exit 0; \ r=`${PWD_COMMAND}`; export r; \ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ $(SET_LIB_PATH) \ for flag in $(EXTRA_HOST_FLAGS); do \ eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \ done; \ - echo "Doing dvi in binutils" ; \ - (cd binutils && \ + echo "Doing maintainer-clean in bison" ; \ + (cd bison && \ $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \ "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \ "RANLIB=$${RANLIB}" \ "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" \ - dvi) \ + maintainer-clean) \ || exit 1 -.PHONY: maybe-dvi-bison dvi-bison -maybe-dvi-bison: -dvi-bison: \ - configure-bison - @[ -f ./bison/Makefile ] || exit 0; \ +.PHONY: configure-byacc maybe-configure-byacc +maybe-configure-byacc: +configure-byacc: + @test ! -f byacc/Makefile || exit 0; \ + [ -d byacc ] || mkdir byacc; \ + r=`${PWD_COMMAND}`; export r; \ + s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ + CC="$(CC)"; export CC; \ + CFLAGS="$(CFLAGS)"; export CFLAGS; \ + CONFIG_SHELL="$(SHELL)"; export CONFIG_SHELL; \ + CXX="$(CXX)"; export CXX; \ + CXXFLAGS="$(CXXFLAGS)"; export CXXFLAGS; \ + AR="$(AR)"; export AR; \ + AS="$(AS)"; export AS; \ + CC_FOR_BUILD="$(CC_FOR_BUILD)"; export CC_FOR_BUILD; \ + DLLTOOL="$(DLLTOOL)"; export DLLTOOL; \ + LD="$(LD)"; export LD; \ + NM="$(NM)"; export NM; \ + RANLIB="$(RANLIB)"; export RANLIB; \ + WINDRES="$(WINDRES)"; export WINDRES; \ + OBJCOPY="$(OBJCOPY)"; export OBJCOPY; \ + OBJDUMP="$(OBJDUMP)"; export OBJDUMP; \ + echo Configuring in byacc; \ + cd byacc || exit 1; \ + case $(srcdir) in \ + \.) \ + srcdiroption="--srcdir=."; \ + libsrcdir=".";; \ + /* | [A-Za-z]:[\\/]*) \ + srcdiroption="--srcdir=$(srcdir)/byacc"; \ + libsrcdir="$$s/byacc";; \ + *) \ + srcdiroption="--srcdir=../$(srcdir)/byacc"; \ + libsrcdir="$$s/byacc";; \ + esac; \ + $(SHELL) $${libsrcdir}/configure \ + $(HOST_CONFIGARGS) $${srcdiroption} \ + || exit 1 + +.PHONY: all-byacc maybe-all-byacc +maybe-all-byacc: +all-byacc: configure-byacc + @r=`${PWD_COMMAND}`; export r; \ + s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ + $(SET_LIB_PATH) \ + (cd byacc && $(MAKE) $(FLAGS_TO_PASS) all) + +.PHONY: check-byacc maybe-check-byacc +maybe-check-byacc: + +# This module is only tested in a native toolchain. +check-byacc: + @if [ '$(host)' = '$(target)' ] ; then \ + r=`${PWD_COMMAND}`; export r; \ + s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ + $(SET_LIB_PATH) \ + (cd byacc && $(MAKE) $(FLAGS_TO_PASS) check); \ + fi + + +.PHONY: install-byacc maybe-install-byacc +maybe-install-byacc: + +install-byacc: installdirs + @r=`${PWD_COMMAND}`; export r; \ + s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ + $(SET_LIB_PATH) \ + (cd byacc && $(MAKE) $(FLAGS_TO_PASS) install) + + +# Other targets (info, dvi, etc.) + +.PHONY: maybe-info-byacc info-byacc +maybe-info-byacc: + +info-byacc: \ + configure-byacc + @[ -f ./byacc/Makefile ] || exit 0; \ r=`${PWD_COMMAND}`; export r; \ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ $(SET_LIB_PATH) \ for flag in $(EXTRA_HOST_FLAGS); do \ eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \ done; \ - echo "Doing dvi in bison" ; \ - (cd bison && \ + echo "Doing info in byacc" ; \ + (cd byacc && \ $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \ "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \ "RANLIB=$${RANLIB}" \ "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" \ - dvi) \ + info) \ || exit 1 @@ -2918,262 +4209,263 @@ dvi-byacc: \ || exit 1 -.PHONY: maybe-dvi-bzip2 dvi-bzip2 -maybe-dvi-bzip2: +.PHONY: maybe-TAGS-byacc TAGS-byacc +maybe-TAGS-byacc: -dvi-bzip2: \ - configure-bzip2 - @[ -f ./bzip2/Makefile ] || exit 0; \ +TAGS-byacc: \ + configure-byacc + @[ -f ./byacc/Makefile ] || exit 0; \ r=`${PWD_COMMAND}`; export r; \ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ $(SET_LIB_PATH) \ for flag in $(EXTRA_HOST_FLAGS); do \ eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \ done; \ - echo "Doing dvi in bzip2" ; \ - (cd bzip2 && \ + echo "Doing TAGS in byacc" ; \ + (cd byacc && \ $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \ "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \ "RANLIB=$${RANLIB}" \ "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" \ - dvi) \ + TAGS) \ || exit 1 -.PHONY: maybe-dvi-dejagnu dvi-dejagnu -maybe-dvi-dejagnu: +.PHONY: maybe-install-info-byacc install-info-byacc +maybe-install-info-byacc: -dvi-dejagnu: \ - configure-dejagnu - @[ -f ./dejagnu/Makefile ] || exit 0; \ +install-info-byacc: \ + configure-byacc \ + info-byacc + @[ -f ./byacc/Makefile ] || exit 0; \ r=`${PWD_COMMAND}`; export r; \ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ $(SET_LIB_PATH) \ for flag in $(EXTRA_HOST_FLAGS); do \ eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \ done; \ - echo "Doing dvi in dejagnu" ; \ - (cd dejagnu && \ + echo "Doing install-info in byacc" ; \ + (cd byacc && \ $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \ "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \ "RANLIB=$${RANLIB}" \ "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" \ - dvi) \ + install-info) \ || exit 1 -.PHONY: maybe-dvi-diff dvi-diff -maybe-dvi-diff: +.PHONY: maybe-installcheck-byacc installcheck-byacc +maybe-installcheck-byacc: -dvi-diff: \ - configure-diff - @[ -f ./diff/Makefile ] || exit 0; \ +installcheck-byacc: \ + configure-byacc + @[ -f ./byacc/Makefile ] || exit 0; \ r=`${PWD_COMMAND}`; export r; \ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ $(SET_LIB_PATH) \ for flag in $(EXTRA_HOST_FLAGS); do \ eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \ done; \ - echo "Doing dvi in diff" ; \ - (cd diff && \ + echo "Doing installcheck in byacc" ; \ + (cd byacc && \ $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \ "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \ "RANLIB=$${RANLIB}" \ "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" \ - dvi) \ + installcheck) \ || exit 1 -.PHONY: maybe-dvi-dosutils dvi-dosutils -maybe-dvi-dosutils: +.PHONY: maybe-mostlyclean-byacc mostlyclean-byacc +maybe-mostlyclean-byacc: -dvi-dosutils: \ - configure-dosutils - @[ -f ./dosutils/Makefile ] || exit 0; \ +mostlyclean-byacc: + @[ -f ./byacc/Makefile ] || exit 0; \ r=`${PWD_COMMAND}`; export r; \ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ $(SET_LIB_PATH) \ for flag in $(EXTRA_HOST_FLAGS); do \ eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \ done; \ - echo "Doing dvi in dosutils" ; \ - (cd dosutils && \ + echo "Doing mostlyclean in byacc" ; \ + (cd byacc && \ $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \ "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \ "RANLIB=$${RANLIB}" \ "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" \ - dvi) \ + mostlyclean) \ || exit 1 -.PHONY: maybe-dvi-etc dvi-etc -maybe-dvi-etc: +.PHONY: maybe-clean-byacc clean-byacc +maybe-clean-byacc: -dvi-etc: \ - configure-etc - @[ -f ./etc/Makefile ] || exit 0; \ +clean-byacc: + @[ -f ./byacc/Makefile ] || exit 0; \ r=`${PWD_COMMAND}`; export r; \ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ $(SET_LIB_PATH) \ for flag in $(EXTRA_HOST_FLAGS); do \ eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \ done; \ - echo "Doing dvi in etc" ; \ - (cd etc && \ + echo "Doing clean in byacc" ; \ + (cd byacc && \ $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \ "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \ "RANLIB=$${RANLIB}" \ "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" \ - dvi) \ + clean) \ || exit 1 -.PHONY: maybe-dvi-fastjar dvi-fastjar -maybe-dvi-fastjar: +.PHONY: maybe-distclean-byacc distclean-byacc +maybe-distclean-byacc: -dvi-fastjar: \ - configure-fastjar - @[ -f ./fastjar/Makefile ] || exit 0; \ +distclean-byacc: + @[ -f ./byacc/Makefile ] || exit 0; \ r=`${PWD_COMMAND}`; export r; \ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ $(SET_LIB_PATH) \ for flag in $(EXTRA_HOST_FLAGS); do \ eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \ done; \ - echo "Doing dvi in fastjar" ; \ - (cd fastjar && \ + echo "Doing distclean in byacc" ; \ + (cd byacc && \ $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \ "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \ "RANLIB=$${RANLIB}" \ "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" \ - dvi) \ + distclean) \ || exit 1 -.PHONY: maybe-dvi-fileutils dvi-fileutils -maybe-dvi-fileutils: +.PHONY: maybe-maintainer-clean-byacc maintainer-clean-byacc +maybe-maintainer-clean-byacc: -dvi-fileutils: \ - configure-fileutils - @[ -f ./fileutils/Makefile ] || exit 0; \ +maintainer-clean-byacc: + @[ -f ./byacc/Makefile ] || exit 0; \ r=`${PWD_COMMAND}`; export r; \ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ $(SET_LIB_PATH) \ for flag in $(EXTRA_HOST_FLAGS); do \ eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \ done; \ - echo "Doing dvi in fileutils" ; \ - (cd fileutils && \ + echo "Doing maintainer-clean in byacc" ; \ + (cd byacc && \ $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \ "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \ "RANLIB=$${RANLIB}" \ "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" \ - dvi) \ + maintainer-clean) \ || exit 1 -.PHONY: maybe-dvi-findutils dvi-findutils -maybe-dvi-findutils: -dvi-findutils: \ - configure-findutils - @[ -f ./findutils/Makefile ] || exit 0; \ +.PHONY: configure-bzip2 maybe-configure-bzip2 +maybe-configure-bzip2: +configure-bzip2: + @test ! -f bzip2/Makefile || exit 0; \ + [ -d bzip2 ] || mkdir bzip2; \ r=`${PWD_COMMAND}`; export r; \ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ - $(SET_LIB_PATH) \ - for flag in $(EXTRA_HOST_FLAGS); do \ - eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \ - done; \ - echo "Doing dvi in findutils" ; \ - (cd findutils && \ - $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \ - "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \ - "RANLIB=$${RANLIB}" \ - "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" \ - dvi) \ + CC="$(CC)"; export CC; \ + CFLAGS="$(CFLAGS)"; export CFLAGS; \ + CONFIG_SHELL="$(SHELL)"; export CONFIG_SHELL; \ + CXX="$(CXX)"; export CXX; \ + CXXFLAGS="$(CXXFLAGS)"; export CXXFLAGS; \ + AR="$(AR)"; export AR; \ + AS="$(AS)"; export AS; \ + CC_FOR_BUILD="$(CC_FOR_BUILD)"; export CC_FOR_BUILD; \ + DLLTOOL="$(DLLTOOL)"; export DLLTOOL; \ + LD="$(LD)"; export LD; \ + NM="$(NM)"; export NM; \ + RANLIB="$(RANLIB)"; export RANLIB; \ + WINDRES="$(WINDRES)"; export WINDRES; \ + OBJCOPY="$(OBJCOPY)"; export OBJCOPY; \ + OBJDUMP="$(OBJDUMP)"; export OBJDUMP; \ + echo Configuring in bzip2; \ + cd bzip2 || exit 1; \ + case $(srcdir) in \ + \.) \ + srcdiroption="--srcdir=."; \ + libsrcdir=".";; \ + /* | [A-Za-z]:[\\/]*) \ + srcdiroption="--srcdir=$(srcdir)/bzip2"; \ + libsrcdir="$$s/bzip2";; \ + *) \ + srcdiroption="--srcdir=../$(srcdir)/bzip2"; \ + libsrcdir="$$s/bzip2";; \ + esac; \ + $(SHELL) $${libsrcdir}/configure \ + $(HOST_CONFIGARGS) $${srcdiroption} \ || exit 1 +.PHONY: all-bzip2 maybe-all-bzip2 +maybe-all-bzip2: +all-bzip2: configure-bzip2 + @r=`${PWD_COMMAND}`; export r; \ + s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ + $(SET_LIB_PATH) \ + (cd bzip2 && $(MAKE) $(FLAGS_TO_PASS) all) -.PHONY: maybe-dvi-find dvi-find -maybe-dvi-find: +.PHONY: check-bzip2 maybe-check-bzip2 +maybe-check-bzip2: -dvi-find: \ - configure-find - @[ -f ./find/Makefile ] || exit 0; \ - r=`${PWD_COMMAND}`; export r; \ +check-bzip2: + @r=`${PWD_COMMAND}`; export r; \ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ $(SET_LIB_PATH) \ - for flag in $(EXTRA_HOST_FLAGS); do \ - eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \ - done; \ - echo "Doing dvi in find" ; \ - (cd find && \ - $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \ - "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \ - "RANLIB=$${RANLIB}" \ - "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" \ - dvi) \ - || exit 1 + (cd bzip2 && $(MAKE) $(FLAGS_TO_PASS) check) -.PHONY: maybe-dvi-flex dvi-flex -maybe-dvi-flex: +.PHONY: install-bzip2 maybe-install-bzip2 +maybe-install-bzip2: -dvi-flex: \ - configure-flex - @[ -f ./flex/Makefile ] || exit 0; \ - r=`${PWD_COMMAND}`; export r; \ +install-bzip2: installdirs + @r=`${PWD_COMMAND}`; export r; \ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ $(SET_LIB_PATH) \ - for flag in $(EXTRA_HOST_FLAGS); do \ - eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \ - done; \ - echo "Doing dvi in flex" ; \ - (cd flex && \ - $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \ - "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \ - "RANLIB=$${RANLIB}" \ - "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" \ - dvi) \ - || exit 1 + (cd bzip2 && $(MAKE) $(FLAGS_TO_PASS) install) -.PHONY: maybe-dvi-gas dvi-gas -maybe-dvi-gas: +# Other targets (info, dvi, etc.) -dvi-gas: \ - configure-gas - @[ -f ./gas/Makefile ] || exit 0; \ +.PHONY: maybe-info-bzip2 info-bzip2 +maybe-info-bzip2: + +info-bzip2: \ + configure-bzip2 + @[ -f ./bzip2/Makefile ] || exit 0; \ r=`${PWD_COMMAND}`; export r; \ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ $(SET_LIB_PATH) \ for flag in $(EXTRA_HOST_FLAGS); do \ eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \ done; \ - echo "Doing dvi in gas" ; \ - (cd gas && \ + echo "Doing info in bzip2" ; \ + (cd bzip2 && \ $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \ "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \ "RANLIB=$${RANLIB}" \ "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" \ - dvi) \ + info) \ || exit 1 -.PHONY: maybe-dvi-gawk dvi-gawk -maybe-dvi-gawk: +.PHONY: maybe-dvi-bzip2 dvi-bzip2 +maybe-dvi-bzip2: -dvi-gawk: \ - configure-gawk - @[ -f ./gawk/Makefile ] || exit 0; \ +dvi-bzip2: \ + configure-bzip2 + @[ -f ./bzip2/Makefile ] || exit 0; \ r=`${PWD_COMMAND}`; export r; \ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ $(SET_LIB_PATH) \ for flag in $(EXTRA_HOST_FLAGS); do \ eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \ done; \ - echo "Doing dvi in gawk" ; \ - (cd gawk && \ + echo "Doing dvi in bzip2" ; \ + (cd bzip2 && \ $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \ "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \ "RANLIB=$${RANLIB}" \ @@ -3182,262 +4474,263 @@ dvi-gawk: \ || exit 1 -.PHONY: maybe-dvi-gettext dvi-gettext -maybe-dvi-gettext: +.PHONY: maybe-TAGS-bzip2 TAGS-bzip2 +maybe-TAGS-bzip2: -dvi-gettext: \ - configure-gettext - @[ -f ./gettext/Makefile ] || exit 0; \ +TAGS-bzip2: \ + configure-bzip2 + @[ -f ./bzip2/Makefile ] || exit 0; \ r=`${PWD_COMMAND}`; export r; \ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ $(SET_LIB_PATH) \ for flag in $(EXTRA_HOST_FLAGS); do \ eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \ done; \ - echo "Doing dvi in gettext" ; \ - (cd gettext && \ + echo "Doing TAGS in bzip2" ; \ + (cd bzip2 && \ $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \ "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \ "RANLIB=$${RANLIB}" \ "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" \ - dvi) \ + TAGS) \ || exit 1 -.PHONY: maybe-dvi-gnuserv dvi-gnuserv -maybe-dvi-gnuserv: +.PHONY: maybe-install-info-bzip2 install-info-bzip2 +maybe-install-info-bzip2: -dvi-gnuserv: \ - configure-gnuserv - @[ -f ./gnuserv/Makefile ] || exit 0; \ +install-info-bzip2: \ + configure-bzip2 \ + info-bzip2 + @[ -f ./bzip2/Makefile ] || exit 0; \ r=`${PWD_COMMAND}`; export r; \ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ $(SET_LIB_PATH) \ for flag in $(EXTRA_HOST_FLAGS); do \ eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \ done; \ - echo "Doing dvi in gnuserv" ; \ - (cd gnuserv && \ + echo "Doing install-info in bzip2" ; \ + (cd bzip2 && \ $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \ "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \ "RANLIB=$${RANLIB}" \ "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" \ - dvi) \ + install-info) \ || exit 1 -.PHONY: maybe-dvi-gprof dvi-gprof -maybe-dvi-gprof: +.PHONY: maybe-installcheck-bzip2 installcheck-bzip2 +maybe-installcheck-bzip2: -dvi-gprof: \ - configure-gprof - @[ -f ./gprof/Makefile ] || exit 0; \ +installcheck-bzip2: \ + configure-bzip2 + @[ -f ./bzip2/Makefile ] || exit 0; \ r=`${PWD_COMMAND}`; export r; \ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ $(SET_LIB_PATH) \ for flag in $(EXTRA_HOST_FLAGS); do \ eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \ done; \ - echo "Doing dvi in gprof" ; \ - (cd gprof && \ + echo "Doing installcheck in bzip2" ; \ + (cd bzip2 && \ $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \ "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \ "RANLIB=$${RANLIB}" \ "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" \ - dvi) \ + installcheck) \ || exit 1 -.PHONY: maybe-dvi-gzip dvi-gzip -maybe-dvi-gzip: +.PHONY: maybe-mostlyclean-bzip2 mostlyclean-bzip2 +maybe-mostlyclean-bzip2: -dvi-gzip: \ - configure-gzip - @[ -f ./gzip/Makefile ] || exit 0; \ +mostlyclean-bzip2: + @[ -f ./bzip2/Makefile ] || exit 0; \ r=`${PWD_COMMAND}`; export r; \ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ $(SET_LIB_PATH) \ for flag in $(EXTRA_HOST_FLAGS); do \ eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \ done; \ - echo "Doing dvi in gzip" ; \ - (cd gzip && \ + echo "Doing mostlyclean in bzip2" ; \ + (cd bzip2 && \ $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \ "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \ "RANLIB=$${RANLIB}" \ "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" \ - dvi) \ + mostlyclean) \ || exit 1 -.PHONY: maybe-dvi-hello dvi-hello -maybe-dvi-hello: +.PHONY: maybe-clean-bzip2 clean-bzip2 +maybe-clean-bzip2: -dvi-hello: \ - configure-hello - @[ -f ./hello/Makefile ] || exit 0; \ +clean-bzip2: + @[ -f ./bzip2/Makefile ] || exit 0; \ r=`${PWD_COMMAND}`; export r; \ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ $(SET_LIB_PATH) \ for flag in $(EXTRA_HOST_FLAGS); do \ eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \ done; \ - echo "Doing dvi in hello" ; \ - (cd hello && \ + echo "Doing clean in bzip2" ; \ + (cd bzip2 && \ $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \ "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \ "RANLIB=$${RANLIB}" \ "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" \ - dvi) \ + clean) \ || exit 1 -.PHONY: maybe-dvi-indent dvi-indent -maybe-dvi-indent: +.PHONY: maybe-distclean-bzip2 distclean-bzip2 +maybe-distclean-bzip2: -dvi-indent: \ - configure-indent - @[ -f ./indent/Makefile ] || exit 0; \ +distclean-bzip2: + @[ -f ./bzip2/Makefile ] || exit 0; \ r=`${PWD_COMMAND}`; export r; \ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ $(SET_LIB_PATH) \ for flag in $(EXTRA_HOST_FLAGS); do \ eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \ done; \ - echo "Doing dvi in indent" ; \ - (cd indent && \ + echo "Doing distclean in bzip2" ; \ + (cd bzip2 && \ $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \ "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \ "RANLIB=$${RANLIB}" \ "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" \ - dvi) \ + distclean) \ || exit 1 -.PHONY: maybe-dvi-intl dvi-intl -maybe-dvi-intl: +.PHONY: maybe-maintainer-clean-bzip2 maintainer-clean-bzip2 +maybe-maintainer-clean-bzip2: -dvi-intl: \ - configure-intl - @[ -f ./intl/Makefile ] || exit 0; \ +maintainer-clean-bzip2: + @[ -f ./bzip2/Makefile ] || exit 0; \ r=`${PWD_COMMAND}`; export r; \ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ $(SET_LIB_PATH) \ for flag in $(EXTRA_HOST_FLAGS); do \ eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \ done; \ - echo "Doing dvi in intl" ; \ - (cd intl && \ + echo "Doing maintainer-clean in bzip2" ; \ + (cd bzip2 && \ $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \ "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \ "RANLIB=$${RANLIB}" \ "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" \ - dvi) \ + maintainer-clean) \ || exit 1 -.PHONY: maybe-dvi-tcl dvi-tcl -maybe-dvi-tcl: -dvi-tcl: \ - configure-tcl - @[ -f ./tcl/Makefile ] || exit 0; \ +.PHONY: configure-dejagnu maybe-configure-dejagnu +maybe-configure-dejagnu: +configure-dejagnu: + @test ! -f dejagnu/Makefile || exit 0; \ + [ -d dejagnu ] || mkdir dejagnu; \ r=`${PWD_COMMAND}`; export r; \ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ - $(SET_LIB_PATH) \ - for flag in $(EXTRA_HOST_FLAGS); do \ - eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \ - done; \ - echo "Doing dvi in tcl" ; \ - (cd tcl && \ - $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \ - "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \ - "RANLIB=$${RANLIB}" \ - "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" \ - dvi) \ + CC="$(CC)"; export CC; \ + CFLAGS="$(CFLAGS)"; export CFLAGS; \ + CONFIG_SHELL="$(SHELL)"; export CONFIG_SHELL; \ + CXX="$(CXX)"; export CXX; \ + CXXFLAGS="$(CXXFLAGS)"; export CXXFLAGS; \ + AR="$(AR)"; export AR; \ + AS="$(AS)"; export AS; \ + CC_FOR_BUILD="$(CC_FOR_BUILD)"; export CC_FOR_BUILD; \ + DLLTOOL="$(DLLTOOL)"; export DLLTOOL; \ + LD="$(LD)"; export LD; \ + NM="$(NM)"; export NM; \ + RANLIB="$(RANLIB)"; export RANLIB; \ + WINDRES="$(WINDRES)"; export WINDRES; \ + OBJCOPY="$(OBJCOPY)"; export OBJCOPY; \ + OBJDUMP="$(OBJDUMP)"; export OBJDUMP; \ + echo Configuring in dejagnu; \ + cd dejagnu || exit 1; \ + case $(srcdir) in \ + \.) \ + srcdiroption="--srcdir=."; \ + libsrcdir=".";; \ + /* | [A-Za-z]:[\\/]*) \ + srcdiroption="--srcdir=$(srcdir)/dejagnu"; \ + libsrcdir="$$s/dejagnu";; \ + *) \ + srcdiroption="--srcdir=../$(srcdir)/dejagnu"; \ + libsrcdir="$$s/dejagnu";; \ + esac; \ + $(SHELL) $${libsrcdir}/configure \ + $(HOST_CONFIGARGS) $${srcdiroption} \ || exit 1 +.PHONY: all-dejagnu maybe-all-dejagnu +maybe-all-dejagnu: +all-dejagnu: configure-dejagnu + @r=`${PWD_COMMAND}`; export r; \ + s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ + $(SET_LIB_PATH) \ + (cd dejagnu && $(MAKE) $(FLAGS_TO_PASS) all) -.PHONY: maybe-dvi-itcl dvi-itcl -maybe-dvi-itcl: +.PHONY: check-dejagnu maybe-check-dejagnu +maybe-check-dejagnu: -dvi-itcl: \ - configure-itcl - @[ -f ./itcl/Makefile ] || exit 0; \ - r=`${PWD_COMMAND}`; export r; \ +check-dejagnu: + @r=`${PWD_COMMAND}`; export r; \ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ $(SET_LIB_PATH) \ - for flag in $(EXTRA_HOST_FLAGS); do \ - eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \ - done; \ - echo "Doing dvi in itcl" ; \ - (cd itcl && \ - $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \ - "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \ - "RANLIB=$${RANLIB}" \ - "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" \ - dvi) \ - || exit 1 + (cd dejagnu && $(MAKE) $(FLAGS_TO_PASS) check) -.PHONY: maybe-dvi-ld dvi-ld -maybe-dvi-ld: +.PHONY: install-dejagnu maybe-install-dejagnu +maybe-install-dejagnu: -dvi-ld: \ - configure-ld - @[ -f ./ld/Makefile ] || exit 0; \ - r=`${PWD_COMMAND}`; export r; \ +install-dejagnu: installdirs + @r=`${PWD_COMMAND}`; export r; \ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ $(SET_LIB_PATH) \ - for flag in $(EXTRA_HOST_FLAGS); do \ - eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \ - done; \ - echo "Doing dvi in ld" ; \ - (cd ld && \ - $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \ - "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \ - "RANLIB=$${RANLIB}" \ - "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" \ - dvi) \ - || exit 1 + (cd dejagnu && $(MAKE) $(FLAGS_TO_PASS) install) -.PHONY: maybe-dvi-libgui dvi-libgui -maybe-dvi-libgui: +# Other targets (info, dvi, etc.) -dvi-libgui: \ - configure-libgui - @[ -f ./libgui/Makefile ] || exit 0; \ +.PHONY: maybe-info-dejagnu info-dejagnu +maybe-info-dejagnu: + +info-dejagnu: \ + configure-dejagnu + @[ -f ./dejagnu/Makefile ] || exit 0; \ r=`${PWD_COMMAND}`; export r; \ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ $(SET_LIB_PATH) \ for flag in $(EXTRA_HOST_FLAGS); do \ eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \ done; \ - echo "Doing dvi in libgui" ; \ - (cd libgui && \ + echo "Doing info in dejagnu" ; \ + (cd dejagnu && \ $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \ "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \ "RANLIB=$${RANLIB}" \ "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" \ - dvi) \ + info) \ || exit 1 -.PHONY: maybe-dvi-libiberty dvi-libiberty -maybe-dvi-libiberty: +.PHONY: maybe-dvi-dejagnu dvi-dejagnu +maybe-dvi-dejagnu: -dvi-libiberty: \ - configure-libiberty - @[ -f ./libiberty/Makefile ] || exit 0; \ +dvi-dejagnu: \ + configure-dejagnu + @[ -f ./dejagnu/Makefile ] || exit 0; \ r=`${PWD_COMMAND}`; export r; \ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ $(SET_LIB_PATH) \ for flag in $(EXTRA_HOST_FLAGS); do \ eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \ done; \ - echo "Doing dvi in libiberty" ; \ - (cd libiberty && \ + echo "Doing dvi in dejagnu" ; \ + (cd dejagnu && \ $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \ "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \ "RANLIB=$${RANLIB}" \ @@ -3446,262 +4739,263 @@ dvi-libiberty: \ || exit 1 -.PHONY: maybe-dvi-libtool dvi-libtool -maybe-dvi-libtool: +.PHONY: maybe-TAGS-dejagnu TAGS-dejagnu +maybe-TAGS-dejagnu: -dvi-libtool: \ - configure-libtool - @[ -f ./libtool/Makefile ] || exit 0; \ +TAGS-dejagnu: \ + configure-dejagnu + @[ -f ./dejagnu/Makefile ] || exit 0; \ r=`${PWD_COMMAND}`; export r; \ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ $(SET_LIB_PATH) \ for flag in $(EXTRA_HOST_FLAGS); do \ eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \ done; \ - echo "Doing dvi in libtool" ; \ - (cd libtool && \ + echo "Doing TAGS in dejagnu" ; \ + (cd dejagnu && \ $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \ "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \ "RANLIB=$${RANLIB}" \ "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" \ - dvi) \ + TAGS) \ || exit 1 -.PHONY: maybe-dvi-m4 dvi-m4 -maybe-dvi-m4: +.PHONY: maybe-install-info-dejagnu install-info-dejagnu +maybe-install-info-dejagnu: -dvi-m4: \ - configure-m4 - @[ -f ./m4/Makefile ] || exit 0; \ +install-info-dejagnu: \ + configure-dejagnu \ + info-dejagnu + @[ -f ./dejagnu/Makefile ] || exit 0; \ r=`${PWD_COMMAND}`; export r; \ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ $(SET_LIB_PATH) \ for flag in $(EXTRA_HOST_FLAGS); do \ eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \ done; \ - echo "Doing dvi in m4" ; \ - (cd m4 && \ + echo "Doing install-info in dejagnu" ; \ + (cd dejagnu && \ $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \ "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \ "RANLIB=$${RANLIB}" \ "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" \ - dvi) \ + install-info) \ || exit 1 -.PHONY: maybe-dvi-make dvi-make -maybe-dvi-make: +.PHONY: maybe-installcheck-dejagnu installcheck-dejagnu +maybe-installcheck-dejagnu: -dvi-make: \ - configure-make - @[ -f ./make/Makefile ] || exit 0; \ +installcheck-dejagnu: \ + configure-dejagnu + @[ -f ./dejagnu/Makefile ] || exit 0; \ r=`${PWD_COMMAND}`; export r; \ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ $(SET_LIB_PATH) \ for flag in $(EXTRA_HOST_FLAGS); do \ eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \ done; \ - echo "Doing dvi in make" ; \ - (cd make && \ + echo "Doing installcheck in dejagnu" ; \ + (cd dejagnu && \ $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \ "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \ "RANLIB=$${RANLIB}" \ "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" \ - dvi) \ + installcheck) \ || exit 1 -.PHONY: maybe-dvi-mmalloc dvi-mmalloc -maybe-dvi-mmalloc: +.PHONY: maybe-mostlyclean-dejagnu mostlyclean-dejagnu +maybe-mostlyclean-dejagnu: -dvi-mmalloc: \ - configure-mmalloc - @[ -f ./mmalloc/Makefile ] || exit 0; \ +mostlyclean-dejagnu: + @[ -f ./dejagnu/Makefile ] || exit 0; \ r=`${PWD_COMMAND}`; export r; \ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ $(SET_LIB_PATH) \ for flag in $(EXTRA_HOST_FLAGS); do \ eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \ done; \ - echo "Doing dvi in mmalloc" ; \ - (cd mmalloc && \ + echo "Doing mostlyclean in dejagnu" ; \ + (cd dejagnu && \ $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \ "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \ "RANLIB=$${RANLIB}" \ "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" \ - dvi) \ + mostlyclean) \ || exit 1 -.PHONY: maybe-dvi-patch dvi-patch -maybe-dvi-patch: +.PHONY: maybe-clean-dejagnu clean-dejagnu +maybe-clean-dejagnu: -dvi-patch: \ - configure-patch - @[ -f ./patch/Makefile ] || exit 0; \ +clean-dejagnu: + @[ -f ./dejagnu/Makefile ] || exit 0; \ r=`${PWD_COMMAND}`; export r; \ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ $(SET_LIB_PATH) \ for flag in $(EXTRA_HOST_FLAGS); do \ eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \ done; \ - echo "Doing dvi in patch" ; \ - (cd patch && \ + echo "Doing clean in dejagnu" ; \ + (cd dejagnu && \ $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \ "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \ "RANLIB=$${RANLIB}" \ "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" \ - dvi) \ + clean) \ || exit 1 -.PHONY: maybe-dvi-perl dvi-perl -maybe-dvi-perl: +.PHONY: maybe-distclean-dejagnu distclean-dejagnu +maybe-distclean-dejagnu: -dvi-perl: \ - configure-perl - @[ -f ./perl/Makefile ] || exit 0; \ +distclean-dejagnu: + @[ -f ./dejagnu/Makefile ] || exit 0; \ r=`${PWD_COMMAND}`; export r; \ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ $(SET_LIB_PATH) \ for flag in $(EXTRA_HOST_FLAGS); do \ eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \ done; \ - echo "Doing dvi in perl" ; \ - (cd perl && \ + echo "Doing distclean in dejagnu" ; \ + (cd dejagnu && \ $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \ "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \ "RANLIB=$${RANLIB}" \ "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" \ - dvi) \ + distclean) \ || exit 1 -.PHONY: maybe-dvi-prms dvi-prms -maybe-dvi-prms: +.PHONY: maybe-maintainer-clean-dejagnu maintainer-clean-dejagnu +maybe-maintainer-clean-dejagnu: -dvi-prms: \ - configure-prms - @[ -f ./prms/Makefile ] || exit 0; \ +maintainer-clean-dejagnu: + @[ -f ./dejagnu/Makefile ] || exit 0; \ r=`${PWD_COMMAND}`; export r; \ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ $(SET_LIB_PATH) \ for flag in $(EXTRA_HOST_FLAGS); do \ eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \ done; \ - echo "Doing dvi in prms" ; \ - (cd prms && \ + echo "Doing maintainer-clean in dejagnu" ; \ + (cd dejagnu && \ $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \ "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \ "RANLIB=$${RANLIB}" \ "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" \ - dvi) \ + maintainer-clean) \ || exit 1 -.PHONY: maybe-dvi-rcs dvi-rcs -maybe-dvi-rcs: -dvi-rcs: \ - configure-rcs - @[ -f ./rcs/Makefile ] || exit 0; \ +.PHONY: configure-diff maybe-configure-diff +maybe-configure-diff: +configure-diff: + @test ! -f diff/Makefile || exit 0; \ + [ -d diff ] || mkdir diff; \ r=`${PWD_COMMAND}`; export r; \ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ - $(SET_LIB_PATH) \ - for flag in $(EXTRA_HOST_FLAGS); do \ - eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \ - done; \ - echo "Doing dvi in rcs" ; \ - (cd rcs && \ - $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \ - "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \ - "RANLIB=$${RANLIB}" \ - "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" \ - dvi) \ + CC="$(CC)"; export CC; \ + CFLAGS="$(CFLAGS)"; export CFLAGS; \ + CONFIG_SHELL="$(SHELL)"; export CONFIG_SHELL; \ + CXX="$(CXX)"; export CXX; \ + CXXFLAGS="$(CXXFLAGS)"; export CXXFLAGS; \ + AR="$(AR)"; export AR; \ + AS="$(AS)"; export AS; \ + CC_FOR_BUILD="$(CC_FOR_BUILD)"; export CC_FOR_BUILD; \ + DLLTOOL="$(DLLTOOL)"; export DLLTOOL; \ + LD="$(LD)"; export LD; \ + NM="$(NM)"; export NM; \ + RANLIB="$(RANLIB)"; export RANLIB; \ + WINDRES="$(WINDRES)"; export WINDRES; \ + OBJCOPY="$(OBJCOPY)"; export OBJCOPY; \ + OBJDUMP="$(OBJDUMP)"; export OBJDUMP; \ + echo Configuring in diff; \ + cd diff || exit 1; \ + case $(srcdir) in \ + \.) \ + srcdiroption="--srcdir=."; \ + libsrcdir=".";; \ + /* | [A-Za-z]:[\\/]*) \ + srcdiroption="--srcdir=$(srcdir)/diff"; \ + libsrcdir="$$s/diff";; \ + *) \ + srcdiroption="--srcdir=../$(srcdir)/diff"; \ + libsrcdir="$$s/diff";; \ + esac; \ + $(SHELL) $${libsrcdir}/configure \ + $(HOST_CONFIGARGS) $${srcdiroption} \ || exit 1 +.PHONY: all-diff maybe-all-diff +maybe-all-diff: +all-diff: configure-diff + @r=`${PWD_COMMAND}`; export r; \ + s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ + $(SET_LIB_PATH) \ + (cd diff && $(MAKE) $(FLAGS_TO_PASS) all) -.PHONY: maybe-dvi-readline dvi-readline -maybe-dvi-readline: +.PHONY: check-diff maybe-check-diff +maybe-check-diff: -dvi-readline: \ - configure-readline - @[ -f ./readline/Makefile ] || exit 0; \ - r=`${PWD_COMMAND}`; export r; \ +check-diff: + @r=`${PWD_COMMAND}`; export r; \ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ $(SET_LIB_PATH) \ - for flag in $(EXTRA_HOST_FLAGS); do \ - eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \ - done; \ - echo "Doing dvi in readline" ; \ - (cd readline && \ - $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \ - "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \ - "RANLIB=$${RANLIB}" \ - "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" \ - dvi) \ - || exit 1 + (cd diff && $(MAKE) $(FLAGS_TO_PASS) check) -.PHONY: maybe-dvi-release dvi-release -maybe-dvi-release: +.PHONY: install-diff maybe-install-diff +maybe-install-diff: -dvi-release: \ - configure-release - @[ -f ./release/Makefile ] || exit 0; \ - r=`${PWD_COMMAND}`; export r; \ +install-diff: installdirs + @r=`${PWD_COMMAND}`; export r; \ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ $(SET_LIB_PATH) \ - for flag in $(EXTRA_HOST_FLAGS); do \ - eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \ - done; \ - echo "Doing dvi in release" ; \ - (cd release && \ - $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \ - "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \ - "RANLIB=$${RANLIB}" \ - "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" \ - dvi) \ - || exit 1 + (cd diff && $(MAKE) $(FLAGS_TO_PASS) install) -.PHONY: maybe-dvi-recode dvi-recode -maybe-dvi-recode: +# Other targets (info, dvi, etc.) -dvi-recode: \ - configure-recode - @[ -f ./recode/Makefile ] || exit 0; \ +.PHONY: maybe-info-diff info-diff +maybe-info-diff: + +info-diff: \ + configure-diff + @[ -f ./diff/Makefile ] || exit 0; \ r=`${PWD_COMMAND}`; export r; \ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ $(SET_LIB_PATH) \ for flag in $(EXTRA_HOST_FLAGS); do \ eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \ done; \ - echo "Doing dvi in recode" ; \ - (cd recode && \ + echo "Doing info in diff" ; \ + (cd diff && \ $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \ "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \ "RANLIB=$${RANLIB}" \ "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" \ - dvi) \ + info) \ || exit 1 -.PHONY: maybe-dvi-sed dvi-sed -maybe-dvi-sed: +.PHONY: maybe-dvi-diff dvi-diff +maybe-dvi-diff: -dvi-sed: \ - configure-sed - @[ -f ./sed/Makefile ] || exit 0; \ +dvi-diff: \ + configure-diff + @[ -f ./diff/Makefile ] || exit 0; \ r=`${PWD_COMMAND}`; export r; \ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ $(SET_LIB_PATH) \ for flag in $(EXTRA_HOST_FLAGS); do \ eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \ done; \ - echo "Doing dvi in sed" ; \ - (cd sed && \ + echo "Doing dvi in diff" ; \ + (cd diff && \ $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \ "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \ "RANLIB=$${RANLIB}" \ @@ -3710,240 +5004,259 @@ dvi-sed: \ || exit 1 -.PHONY: maybe-dvi-send-pr dvi-send-pr -maybe-dvi-send-pr: +.PHONY: maybe-TAGS-diff TAGS-diff +maybe-TAGS-diff: -dvi-send-pr: \ - configure-send-pr - @[ -f ./send-pr/Makefile ] || exit 0; \ +TAGS-diff: \ + configure-diff + @[ -f ./diff/Makefile ] || exit 0; \ r=`${PWD_COMMAND}`; export r; \ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ $(SET_LIB_PATH) \ for flag in $(EXTRA_HOST_FLAGS); do \ eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \ done; \ - echo "Doing dvi in send-pr" ; \ - (cd send-pr && \ + echo "Doing TAGS in diff" ; \ + (cd diff && \ $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \ "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \ "RANLIB=$${RANLIB}" \ "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" \ - dvi) \ + TAGS) \ || exit 1 -.PHONY: maybe-dvi-shellutils dvi-shellutils -maybe-dvi-shellutils: +.PHONY: maybe-install-info-diff install-info-diff +maybe-install-info-diff: -dvi-shellutils: \ - configure-shellutils - @[ -f ./shellutils/Makefile ] || exit 0; \ +install-info-diff: \ + configure-diff \ + info-diff + @[ -f ./diff/Makefile ] || exit 0; \ r=`${PWD_COMMAND}`; export r; \ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ $(SET_LIB_PATH) \ for flag in $(EXTRA_HOST_FLAGS); do \ eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \ done; \ - echo "Doing dvi in shellutils" ; \ - (cd shellutils && \ + echo "Doing install-info in diff" ; \ + (cd diff && \ $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \ "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \ "RANLIB=$${RANLIB}" \ "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" \ - dvi) \ + install-info) \ || exit 1 -.PHONY: maybe-dvi-sid dvi-sid -maybe-dvi-sid: +.PHONY: maybe-installcheck-diff installcheck-diff +maybe-installcheck-diff: -dvi-sid: \ - configure-sid - @[ -f ./sid/Makefile ] || exit 0; \ +installcheck-diff: \ + configure-diff + @[ -f ./diff/Makefile ] || exit 0; \ r=`${PWD_COMMAND}`; export r; \ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ $(SET_LIB_PATH) \ for flag in $(EXTRA_HOST_FLAGS); do \ eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \ done; \ - echo "Doing dvi in sid" ; \ - (cd sid && \ + echo "Doing installcheck in diff" ; \ + (cd diff && \ $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \ "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \ "RANLIB=$${RANLIB}" \ "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" \ - dvi) \ + installcheck) \ || exit 1 -.PHONY: maybe-dvi-sim dvi-sim -maybe-dvi-sim: +.PHONY: maybe-mostlyclean-diff mostlyclean-diff +maybe-mostlyclean-diff: -dvi-sim: \ - configure-sim - @[ -f ./sim/Makefile ] || exit 0; \ +mostlyclean-diff: + @[ -f ./diff/Makefile ] || exit 0; \ r=`${PWD_COMMAND}`; export r; \ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ $(SET_LIB_PATH) \ for flag in $(EXTRA_HOST_FLAGS); do \ eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \ done; \ - echo "Doing dvi in sim" ; \ - (cd sim && \ + echo "Doing mostlyclean in diff" ; \ + (cd diff && \ $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \ "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \ "RANLIB=$${RANLIB}" \ "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" \ - dvi) \ + mostlyclean) \ || exit 1 -.PHONY: maybe-dvi-tar dvi-tar -maybe-dvi-tar: +.PHONY: maybe-clean-diff clean-diff +maybe-clean-diff: -dvi-tar: \ - configure-tar - @[ -f ./tar/Makefile ] || exit 0; \ +clean-diff: + @[ -f ./diff/Makefile ] || exit 0; \ r=`${PWD_COMMAND}`; export r; \ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ $(SET_LIB_PATH) \ for flag in $(EXTRA_HOST_FLAGS); do \ eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \ done; \ - echo "Doing dvi in tar" ; \ - (cd tar && \ + echo "Doing clean in diff" ; \ + (cd diff && \ $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \ "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \ "RANLIB=$${RANLIB}" \ "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" \ - dvi) \ + clean) \ || exit 1 -.PHONY: maybe-dvi-texinfo dvi-texinfo -maybe-dvi-texinfo: +.PHONY: maybe-distclean-diff distclean-diff +maybe-distclean-diff: -dvi-texinfo: \ - configure-texinfo - @[ -f ./texinfo/Makefile ] || exit 0; \ +distclean-diff: + @[ -f ./diff/Makefile ] || exit 0; \ r=`${PWD_COMMAND}`; export r; \ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ $(SET_LIB_PATH) \ for flag in $(EXTRA_HOST_FLAGS); do \ eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \ done; \ - echo "Doing dvi in texinfo" ; \ - (cd texinfo && \ + echo "Doing distclean in diff" ; \ + (cd diff && \ $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \ "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \ "RANLIB=$${RANLIB}" \ "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" \ - dvi) \ + distclean) \ || exit 1 -.PHONY: maybe-dvi-textutils dvi-textutils -maybe-dvi-textutils: +.PHONY: maybe-maintainer-clean-diff maintainer-clean-diff +maybe-maintainer-clean-diff: -dvi-textutils: \ - configure-textutils - @[ -f ./textutils/Makefile ] || exit 0; \ +maintainer-clean-diff: + @[ -f ./diff/Makefile ] || exit 0; \ r=`${PWD_COMMAND}`; export r; \ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ $(SET_LIB_PATH) \ for flag in $(EXTRA_HOST_FLAGS); do \ eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \ done; \ - echo "Doing dvi in textutils" ; \ - (cd textutils && \ + echo "Doing maintainer-clean in diff" ; \ + (cd diff && \ $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \ "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \ "RANLIB=$${RANLIB}" \ "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" \ - dvi) \ + maintainer-clean) \ || exit 1 -.PHONY: maybe-dvi-time dvi-time -maybe-dvi-time: -dvi-time: \ - configure-time - @[ -f ./time/Makefile ] || exit 0; \ +.PHONY: configure-dosutils maybe-configure-dosutils +maybe-configure-dosutils: +configure-dosutils: + @test ! -f dosutils/Makefile || exit 0; \ + [ -d dosutils ] || mkdir dosutils; \ r=`${PWD_COMMAND}`; export r; \ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ - $(SET_LIB_PATH) \ - for flag in $(EXTRA_HOST_FLAGS); do \ - eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \ - done; \ - echo "Doing dvi in time" ; \ - (cd time && \ - $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \ - "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \ - "RANLIB=$${RANLIB}" \ - "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" \ - dvi) \ + CC="$(CC)"; export CC; \ + CFLAGS="$(CFLAGS)"; export CFLAGS; \ + CONFIG_SHELL="$(SHELL)"; export CONFIG_SHELL; \ + CXX="$(CXX)"; export CXX; \ + CXXFLAGS="$(CXXFLAGS)"; export CXXFLAGS; \ + AR="$(AR)"; export AR; \ + AS="$(AS)"; export AS; \ + CC_FOR_BUILD="$(CC_FOR_BUILD)"; export CC_FOR_BUILD; \ + DLLTOOL="$(DLLTOOL)"; export DLLTOOL; \ + LD="$(LD)"; export LD; \ + NM="$(NM)"; export NM; \ + RANLIB="$(RANLIB)"; export RANLIB; \ + WINDRES="$(WINDRES)"; export WINDRES; \ + OBJCOPY="$(OBJCOPY)"; export OBJCOPY; \ + OBJDUMP="$(OBJDUMP)"; export OBJDUMP; \ + echo Configuring in dosutils; \ + cd dosutils || exit 1; \ + case $(srcdir) in \ + \.) \ + srcdiroption="--srcdir=."; \ + libsrcdir=".";; \ + /* | [A-Za-z]:[\\/]*) \ + srcdiroption="--srcdir=$(srcdir)/dosutils"; \ + libsrcdir="$$s/dosutils";; \ + *) \ + srcdiroption="--srcdir=../$(srcdir)/dosutils"; \ + libsrcdir="$$s/dosutils";; \ + esac; \ + $(SHELL) $${libsrcdir}/configure \ + $(HOST_CONFIGARGS) $${srcdiroption} \ || exit 1 +.PHONY: all-dosutils maybe-all-dosutils +maybe-all-dosutils: +all-dosutils: configure-dosutils + @r=`${PWD_COMMAND}`; export r; \ + s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ + $(SET_LIB_PATH) \ + (cd dosutils && $(MAKE) $(FLAGS_TO_PASS) all) -.PHONY: maybe-dvi-uudecode dvi-uudecode -maybe-dvi-uudecode: +.PHONY: check-dosutils maybe-check-dosutils +maybe-check-dosutils: -dvi-uudecode: \ - configure-uudecode - @[ -f ./uudecode/Makefile ] || exit 0; \ - r=`${PWD_COMMAND}`; export r; \ +check-dosutils: + + +.PHONY: install-dosutils maybe-install-dosutils +maybe-install-dosutils: + +install-dosutils: installdirs + @r=`${PWD_COMMAND}`; export r; \ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ $(SET_LIB_PATH) \ - for flag in $(EXTRA_HOST_FLAGS); do \ - eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \ - done; \ - echo "Doing dvi in uudecode" ; \ - (cd uudecode && \ - $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \ - "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \ - "RANLIB=$${RANLIB}" \ - "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" \ - dvi) \ - || exit 1 + (cd dosutils && $(MAKE) $(FLAGS_TO_PASS) install) -.PHONY: maybe-dvi-wdiff dvi-wdiff -maybe-dvi-wdiff: +# Other targets (info, dvi, etc.) -dvi-wdiff: \ - configure-wdiff - @[ -f ./wdiff/Makefile ] || exit 0; \ +.PHONY: maybe-info-dosutils info-dosutils +maybe-info-dosutils: + +info-dosutils: \ + configure-dosutils + @[ -f ./dosutils/Makefile ] || exit 0; \ r=`${PWD_COMMAND}`; export r; \ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ $(SET_LIB_PATH) \ for flag in $(EXTRA_HOST_FLAGS); do \ eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \ done; \ - echo "Doing dvi in wdiff" ; \ - (cd wdiff && \ + echo "Doing info in dosutils" ; \ + (cd dosutils && \ $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \ "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \ "RANLIB=$${RANLIB}" \ "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" \ - dvi) \ + info) \ || exit 1 -.PHONY: maybe-dvi-zip dvi-zip -maybe-dvi-zip: +.PHONY: maybe-dvi-dosutils dvi-dosutils +maybe-dvi-dosutils: -dvi-zip: \ - configure-zip - @[ -f ./zip/Makefile ] || exit 0; \ +dvi-dosutils: \ + configure-dosutils + @[ -f ./dosutils/Makefile ] || exit 0; \ r=`${PWD_COMMAND}`; export r; \ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ $(SET_LIB_PATH) \ for flag in $(EXTRA_HOST_FLAGS); do \ eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \ done; \ - echo "Doing dvi in zip" ; \ - (cd zip && \ + echo "Doing dvi in dosutils" ; \ + (cd dosutils && \ $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \ "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \ "RANLIB=$${RANLIB}" \ @@ -3952,243 +5265,263 @@ dvi-zip: \ || exit 1 -.PHONY: maybe-dvi-zlib dvi-zlib -maybe-dvi-zlib: +.PHONY: maybe-TAGS-dosutils TAGS-dosutils +maybe-TAGS-dosutils: -dvi-zlib: \ - configure-zlib - @[ -f ./zlib/Makefile ] || exit 0; \ +TAGS-dosutils: \ + configure-dosutils + @[ -f ./dosutils/Makefile ] || exit 0; \ r=`${PWD_COMMAND}`; export r; \ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ $(SET_LIB_PATH) \ for flag in $(EXTRA_HOST_FLAGS); do \ eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \ done; \ - echo "Doing dvi in zlib" ; \ - (cd zlib && \ + echo "Doing TAGS in dosutils" ; \ + (cd dosutils && \ $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \ "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \ "RANLIB=$${RANLIB}" \ "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" \ - dvi) \ + TAGS) \ || exit 1 -.PHONY: maybe-dvi-gdb dvi-gdb -maybe-dvi-gdb: +.PHONY: maybe-install-info-dosutils install-info-dosutils +maybe-install-info-dosutils: -dvi-gdb: \ - configure-gdb - @[ -f ./gdb/Makefile ] || exit 0; \ +install-info-dosutils: \ + configure-dosutils \ + info-dosutils + @[ -f ./dosutils/Makefile ] || exit 0; \ r=`${PWD_COMMAND}`; export r; \ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ $(SET_LIB_PATH) \ for flag in $(EXTRA_HOST_FLAGS); do \ eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \ done; \ - echo "Doing dvi in gdb" ; \ - (cd gdb && \ + echo "Doing install-info in dosutils" ; \ + (cd dosutils && \ $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \ "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \ "RANLIB=$${RANLIB}" \ "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" \ - dvi) \ + install-info) \ || exit 1 -.PHONY: maybe-dvi-expect dvi-expect -maybe-dvi-expect: +.PHONY: maybe-installcheck-dosutils installcheck-dosutils +maybe-installcheck-dosutils: -dvi-expect: \ - configure-expect - @[ -f ./expect/Makefile ] || exit 0; \ +installcheck-dosutils: \ + configure-dosutils + @[ -f ./dosutils/Makefile ] || exit 0; \ r=`${PWD_COMMAND}`; export r; \ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ $(SET_LIB_PATH) \ for flag in $(EXTRA_HOST_FLAGS); do \ eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \ done; \ - echo "Doing dvi in expect" ; \ - (cd expect && \ + echo "Doing installcheck in dosutils" ; \ + (cd dosutils && \ $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \ "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \ "RANLIB=$${RANLIB}" \ "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" \ - dvi) \ + installcheck) \ || exit 1 -.PHONY: maybe-dvi-guile dvi-guile -maybe-dvi-guile: +.PHONY: maybe-mostlyclean-dosutils mostlyclean-dosutils +maybe-mostlyclean-dosutils: -dvi-guile: \ - configure-guile - @[ -f ./guile/Makefile ] || exit 0; \ +mostlyclean-dosutils: + @[ -f ./dosutils/Makefile ] || exit 0; \ r=`${PWD_COMMAND}`; export r; \ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ $(SET_LIB_PATH) \ for flag in $(EXTRA_HOST_FLAGS); do \ eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \ done; \ - echo "Doing dvi in guile" ; \ - (cd guile && \ + echo "Doing mostlyclean in dosutils" ; \ + (cd dosutils && \ $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \ "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \ "RANLIB=$${RANLIB}" \ "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" \ - dvi) \ + mostlyclean) \ || exit 1 -.PHONY: maybe-dvi-tk dvi-tk -maybe-dvi-tk: +.PHONY: maybe-clean-dosutils clean-dosutils +maybe-clean-dosutils: -dvi-tk: \ - configure-tk - @[ -f ./tk/Makefile ] || exit 0; \ +clean-dosutils: + @[ -f ./dosutils/Makefile ] || exit 0; \ r=`${PWD_COMMAND}`; export r; \ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ $(SET_LIB_PATH) \ for flag in $(EXTRA_HOST_FLAGS); do \ eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \ done; \ - echo "Doing dvi in tk" ; \ - (cd tk && \ + echo "Doing clean in dosutils" ; \ + (cd dosutils && \ $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \ "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \ "RANLIB=$${RANLIB}" \ "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" \ - dvi) \ + clean) \ || exit 1 -.PHONY: maybe-dvi-tix dvi-tix -maybe-dvi-tix: +.PHONY: maybe-distclean-dosutils distclean-dosutils +maybe-distclean-dosutils: -dvi-tix: \ - configure-tix - @[ -f ./tix/Makefile ] || exit 0; \ +distclean-dosutils: + @[ -f ./dosutils/Makefile ] || exit 0; \ r=`${PWD_COMMAND}`; export r; \ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ $(SET_LIB_PATH) \ for flag in $(EXTRA_HOST_FLAGS); do \ eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \ done; \ - echo "Doing dvi in tix" ; \ - (cd tix && \ + echo "Doing distclean in dosutils" ; \ + (cd dosutils && \ $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \ "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \ "RANLIB=$${RANLIB}" \ "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" \ - dvi) \ + distclean) \ || exit 1 -.PHONY: maybe-dvi-libtermcap dvi-libtermcap -maybe-dvi-libtermcap: +.PHONY: maybe-maintainer-clean-dosutils maintainer-clean-dosutils +maybe-maintainer-clean-dosutils: -dvi-libtermcap: \ - configure-libtermcap - @[ -f ./libtermcap/Makefile ] || exit 0; \ +maintainer-clean-dosutils: + @[ -f ./dosutils/Makefile ] || exit 0; \ r=`${PWD_COMMAND}`; export r; \ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ $(SET_LIB_PATH) \ for flag in $(EXTRA_HOST_FLAGS); do \ eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \ done; \ - echo "Doing dvi in libtermcap" ; \ - (cd libtermcap && \ + echo "Doing maintainer-clean in dosutils" ; \ + (cd dosutils && \ $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \ "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \ "RANLIB=$${RANLIB}" \ "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" \ - dvi) \ + maintainer-clean) \ || exit 1 -.PHONY: maybe-dvi-utils dvi-utils -maybe-dvi-utils: -dvi-utils: \ - configure-utils - @[ -f ./utils/Makefile ] || exit 0; \ +.PHONY: configure-etc maybe-configure-etc +maybe-configure-etc: +configure-etc: + @test ! -f etc/Makefile || exit 0; \ + [ -d etc ] || mkdir etc; \ r=`${PWD_COMMAND}`; export r; \ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ - $(SET_LIB_PATH) \ - for flag in $(EXTRA_HOST_FLAGS); do \ - eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \ - done; \ - echo "Doing dvi in utils" ; \ - (cd utils && \ - $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \ - "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \ - "RANLIB=$${RANLIB}" \ - "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" \ - dvi) \ + CC="$(CC)"; export CC; \ + CFLAGS="$(CFLAGS)"; export CFLAGS; \ + CONFIG_SHELL="$(SHELL)"; export CONFIG_SHELL; \ + CXX="$(CXX)"; export CXX; \ + CXXFLAGS="$(CXXFLAGS)"; export CXXFLAGS; \ + AR="$(AR)"; export AR; \ + AS="$(AS)"; export AS; \ + CC_FOR_BUILD="$(CC_FOR_BUILD)"; export CC_FOR_BUILD; \ + DLLTOOL="$(DLLTOOL)"; export DLLTOOL; \ + LD="$(LD)"; export LD; \ + NM="$(NM)"; export NM; \ + RANLIB="$(RANLIB)"; export RANLIB; \ + WINDRES="$(WINDRES)"; export WINDRES; \ + OBJCOPY="$(OBJCOPY)"; export OBJCOPY; \ + OBJDUMP="$(OBJDUMP)"; export OBJDUMP; \ + echo Configuring in etc; \ + cd etc || exit 1; \ + case $(srcdir) in \ + \.) \ + srcdiroption="--srcdir=."; \ + libsrcdir=".";; \ + /* | [A-Za-z]:[\\/]*) \ + srcdiroption="--srcdir=$(srcdir)/etc"; \ + libsrcdir="$$s/etc";; \ + *) \ + srcdiroption="--srcdir=../$(srcdir)/etc"; \ + libsrcdir="$$s/etc";; \ + esac; \ + $(SHELL) $${libsrcdir}/configure \ + $(HOST_CONFIGARGS) $${srcdiroption} \ || exit 1 +.PHONY: all-etc maybe-all-etc +maybe-all-etc: +all-etc: configure-etc + @r=`${PWD_COMMAND}`; export r; \ + s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ + $(SET_LIB_PATH) \ + (cd etc && $(MAKE) $(FLAGS_TO_PASS) all) + +.PHONY: check-etc maybe-check-etc +maybe-check-etc: +check-etc: + @r=`${PWD_COMMAND}`; export r; \ + s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ + $(SET_LIB_PATH) \ + (cd etc && $(MAKE) $(FLAGS_TO_PASS) check) -# Target modules. -.PHONY: maybe-dvi-target-libstdc++-v3 dvi-target-libstdc++-v3 -maybe-dvi-target-libstdc++-v3: +.PHONY: install-etc maybe-install-etc +maybe-install-etc: -dvi-target-libstdc++-v3: \ - configure-target-libstdc++-v3 - @[ -f $(TARGET_SUBDIR)/libstdc++-v3/Makefile ] || exit 0 ; \ - r=`${PWD_COMMAND}`; export r; \ +install-etc: installdirs + @r=`${PWD_COMMAND}`; export r; \ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ $(SET_LIB_PATH) \ - echo "Doing dvi in $(TARGET_SUBDIR)/libstdc++-v3" ; \ - for flag in $(EXTRA_TARGET_FLAGS); do \ - eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \ - done; \ - (cd $(TARGET_SUBDIR)/libstdc++-v3 && \ - $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \ - "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \ - "RANLIB=$${RANLIB}" \ - "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" \ - dvi) \ - || exit 1 + (cd etc && $(MAKE) $(FLAGS_TO_PASS) install) -.PHONY: maybe-dvi-target-newlib dvi-target-newlib -maybe-dvi-target-newlib: +# Other targets (info, dvi, etc.) -dvi-target-newlib: \ - configure-target-newlib - @[ -f $(TARGET_SUBDIR)/newlib/Makefile ] || exit 0 ; \ +.PHONY: maybe-info-etc info-etc +maybe-info-etc: + +info-etc: \ + configure-etc + @[ -f ./etc/Makefile ] || exit 0; \ r=`${PWD_COMMAND}`; export r; \ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ $(SET_LIB_PATH) \ - echo "Doing dvi in $(TARGET_SUBDIR)/newlib" ; \ - for flag in $(EXTRA_TARGET_FLAGS); do \ + for flag in $(EXTRA_HOST_FLAGS); do \ eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \ done; \ - (cd $(TARGET_SUBDIR)/newlib && \ + echo "Doing info in etc" ; \ + (cd etc && \ $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \ "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \ "RANLIB=$${RANLIB}" \ "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" \ - dvi) \ + info) \ || exit 1 -.PHONY: maybe-dvi-target-libf2c dvi-target-libf2c -maybe-dvi-target-libf2c: +.PHONY: maybe-dvi-etc dvi-etc +maybe-dvi-etc: -dvi-target-libf2c: \ - configure-target-libf2c - @[ -f $(TARGET_SUBDIR)/libf2c/Makefile ] || exit 0 ; \ +dvi-etc: \ + configure-etc + @[ -f ./etc/Makefile ] || exit 0; \ r=`${PWD_COMMAND}`; export r; \ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ $(SET_LIB_PATH) \ - echo "Doing dvi in $(TARGET_SUBDIR)/libf2c" ; \ - for flag in $(EXTRA_TARGET_FLAGS); do \ + for flag in $(EXTRA_HOST_FLAGS); do \ eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \ done; \ - (cd $(TARGET_SUBDIR)/libf2c && \ + echo "Doing dvi in etc" ; \ + (cd etc && \ $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \ "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \ "RANLIB=$${RANLIB}" \ @@ -4197,240 +5530,266 @@ dvi-target-libf2c: \ || exit 1 -.PHONY: maybe-dvi-target-libobjc dvi-target-libobjc -maybe-dvi-target-libobjc: +.PHONY: maybe-TAGS-etc TAGS-etc +maybe-TAGS-etc: -dvi-target-libobjc: \ - configure-target-libobjc - @[ -f $(TARGET_SUBDIR)/libobjc/Makefile ] || exit 0 ; \ +TAGS-etc: \ + configure-etc + @[ -f ./etc/Makefile ] || exit 0; \ r=`${PWD_COMMAND}`; export r; \ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ $(SET_LIB_PATH) \ - echo "Doing dvi in $(TARGET_SUBDIR)/libobjc" ; \ - for flag in $(EXTRA_TARGET_FLAGS); do \ + for flag in $(EXTRA_HOST_FLAGS); do \ eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \ done; \ - (cd $(TARGET_SUBDIR)/libobjc && \ + echo "Doing TAGS in etc" ; \ + (cd etc && \ $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \ "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \ "RANLIB=$${RANLIB}" \ "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" \ - dvi) \ + TAGS) \ || exit 1 -.PHONY: maybe-dvi-target-libtermcap dvi-target-libtermcap -maybe-dvi-target-libtermcap: +.PHONY: maybe-install-info-etc install-info-etc +maybe-install-info-etc: -dvi-target-libtermcap: \ - configure-target-libtermcap - @[ -f $(TARGET_SUBDIR)/libtermcap/Makefile ] || exit 0 ; \ +install-info-etc: \ + configure-etc \ + info-etc + @[ -f ./etc/Makefile ] || exit 0; \ r=`${PWD_COMMAND}`; export r; \ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ $(SET_LIB_PATH) \ - echo "Doing dvi in $(TARGET_SUBDIR)/libtermcap" ; \ - for flag in $(EXTRA_TARGET_FLAGS); do \ + for flag in $(EXTRA_HOST_FLAGS); do \ eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \ done; \ - (cd $(TARGET_SUBDIR)/libtermcap && \ + echo "Doing install-info in etc" ; \ + (cd etc && \ $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \ "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \ "RANLIB=$${RANLIB}" \ "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" \ - dvi) \ + install-info) \ || exit 1 -.PHONY: maybe-dvi-target-winsup dvi-target-winsup -maybe-dvi-target-winsup: +.PHONY: maybe-installcheck-etc installcheck-etc +maybe-installcheck-etc: -dvi-target-winsup: \ - configure-target-winsup - @[ -f $(TARGET_SUBDIR)/winsup/Makefile ] || exit 0 ; \ +installcheck-etc: \ + configure-etc + @[ -f ./etc/Makefile ] || exit 0; \ r=`${PWD_COMMAND}`; export r; \ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ $(SET_LIB_PATH) \ - echo "Doing dvi in $(TARGET_SUBDIR)/winsup" ; \ - for flag in $(EXTRA_TARGET_FLAGS); do \ + for flag in $(EXTRA_HOST_FLAGS); do \ eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \ done; \ - (cd $(TARGET_SUBDIR)/winsup && \ + echo "Doing installcheck in etc" ; \ + (cd etc && \ $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \ "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \ "RANLIB=$${RANLIB}" \ "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" \ - dvi) \ + installcheck) \ || exit 1 -.PHONY: maybe-dvi-target-libgloss dvi-target-libgloss -maybe-dvi-target-libgloss: +.PHONY: maybe-mostlyclean-etc mostlyclean-etc +maybe-mostlyclean-etc: -dvi-target-libgloss: \ - configure-target-libgloss - @[ -f $(TARGET_SUBDIR)/libgloss/Makefile ] || exit 0 ; \ +mostlyclean-etc: + @[ -f ./etc/Makefile ] || exit 0; \ r=`${PWD_COMMAND}`; export r; \ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ $(SET_LIB_PATH) \ - echo "Doing dvi in $(TARGET_SUBDIR)/libgloss" ; \ - for flag in $(EXTRA_TARGET_FLAGS); do \ + for flag in $(EXTRA_HOST_FLAGS); do \ eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \ done; \ - (cd $(TARGET_SUBDIR)/libgloss && \ + echo "Doing mostlyclean in etc" ; \ + (cd etc && \ $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \ "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \ "RANLIB=$${RANLIB}" \ "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" \ - dvi) \ + mostlyclean) \ || exit 1 -.PHONY: maybe-dvi-target-libiberty dvi-target-libiberty -maybe-dvi-target-libiberty: +.PHONY: maybe-clean-etc clean-etc +maybe-clean-etc: -dvi-target-libiberty: \ - configure-target-libiberty - @[ -f $(TARGET_SUBDIR)/libiberty/Makefile ] || exit 0 ; \ +clean-etc: + @[ -f ./etc/Makefile ] || exit 0; \ r=`${PWD_COMMAND}`; export r; \ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ $(SET_LIB_PATH) \ - echo "Doing dvi in $(TARGET_SUBDIR)/libiberty" ; \ - for flag in $(EXTRA_TARGET_FLAGS); do \ + for flag in $(EXTRA_HOST_FLAGS); do \ eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \ done; \ - (cd $(TARGET_SUBDIR)/libiberty && \ + echo "Doing clean in etc" ; \ + (cd etc && \ $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \ "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \ "RANLIB=$${RANLIB}" \ "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" \ - dvi) \ + clean) \ || exit 1 -.PHONY: maybe-dvi-target-gperf dvi-target-gperf -maybe-dvi-target-gperf: +.PHONY: maybe-distclean-etc distclean-etc +maybe-distclean-etc: -dvi-target-gperf: \ - configure-target-gperf - @[ -f $(TARGET_SUBDIR)/gperf/Makefile ] || exit 0 ; \ +distclean-etc: + @[ -f ./etc/Makefile ] || exit 0; \ r=`${PWD_COMMAND}`; export r; \ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ $(SET_LIB_PATH) \ - echo "Doing dvi in $(TARGET_SUBDIR)/gperf" ; \ - for flag in $(EXTRA_TARGET_FLAGS); do \ + for flag in $(EXTRA_HOST_FLAGS); do \ eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \ done; \ - (cd $(TARGET_SUBDIR)/gperf && \ + echo "Doing distclean in etc" ; \ + (cd etc && \ $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \ "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \ "RANLIB=$${RANLIB}" \ "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" \ - dvi) \ + distclean) \ || exit 1 -.PHONY: maybe-dvi-target-examples dvi-target-examples -maybe-dvi-target-examples: +.PHONY: maybe-maintainer-clean-etc maintainer-clean-etc +maybe-maintainer-clean-etc: -dvi-target-examples: \ - configure-target-examples - @[ -f $(TARGET_SUBDIR)/examples/Makefile ] || exit 0 ; \ +maintainer-clean-etc: + @[ -f ./etc/Makefile ] || exit 0; \ r=`${PWD_COMMAND}`; export r; \ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ $(SET_LIB_PATH) \ - echo "Doing dvi in $(TARGET_SUBDIR)/examples" ; \ - for flag in $(EXTRA_TARGET_FLAGS); do \ + for flag in $(EXTRA_HOST_FLAGS); do \ eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \ done; \ - (cd $(TARGET_SUBDIR)/examples && \ + echo "Doing maintainer-clean in etc" ; \ + (cd etc && \ $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \ "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \ "RANLIB=$${RANLIB}" \ "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" \ - dvi) \ + maintainer-clean) \ || exit 1 -.PHONY: maybe-dvi-target-libffi dvi-target-libffi -maybe-dvi-target-libffi: -dvi-target-libffi: \ - configure-target-libffi - @[ -f $(TARGET_SUBDIR)/libffi/Makefile ] || exit 0 ; \ +.PHONY: configure-fastjar maybe-configure-fastjar +maybe-configure-fastjar: +configure-fastjar: + @test ! -f fastjar/Makefile || exit 0; \ + [ -d fastjar ] || mkdir fastjar; \ r=`${PWD_COMMAND}`; export r; \ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ - $(SET_LIB_PATH) \ - echo "Doing dvi in $(TARGET_SUBDIR)/libffi" ; \ - for flag in $(EXTRA_TARGET_FLAGS); do \ - eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \ - done; \ - (cd $(TARGET_SUBDIR)/libffi && \ - $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \ - "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \ - "RANLIB=$${RANLIB}" \ - "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" \ - dvi) \ + CC="$(CC)"; export CC; \ + CFLAGS="$(CFLAGS)"; export CFLAGS; \ + CONFIG_SHELL="$(SHELL)"; export CONFIG_SHELL; \ + CXX="$(CXX)"; export CXX; \ + CXXFLAGS="$(CXXFLAGS)"; export CXXFLAGS; \ + AR="$(AR)"; export AR; \ + AS="$(AS)"; export AS; \ + CC_FOR_BUILD="$(CC_FOR_BUILD)"; export CC_FOR_BUILD; \ + DLLTOOL="$(DLLTOOL)"; export DLLTOOL; \ + LD="$(LD)"; export LD; \ + NM="$(NM)"; export NM; \ + RANLIB="$(RANLIB)"; export RANLIB; \ + WINDRES="$(WINDRES)"; export WINDRES; \ + OBJCOPY="$(OBJCOPY)"; export OBJCOPY; \ + OBJDUMP="$(OBJDUMP)"; export OBJDUMP; \ + echo Configuring in fastjar; \ + cd fastjar || exit 1; \ + case $(srcdir) in \ + \.) \ + srcdiroption="--srcdir=."; \ + libsrcdir=".";; \ + /* | [A-Za-z]:[\\/]*) \ + srcdiroption="--srcdir=$(srcdir)/fastjar"; \ + libsrcdir="$$s/fastjar";; \ + *) \ + srcdiroption="--srcdir=../$(srcdir)/fastjar"; \ + libsrcdir="$$s/fastjar";; \ + esac; \ + $(SHELL) $${libsrcdir}/configure \ + $(HOST_CONFIGARGS) $${srcdiroption} \ || exit 1 +.PHONY: all-fastjar maybe-all-fastjar +maybe-all-fastjar: +all-fastjar: configure-fastjar + @r=`${PWD_COMMAND}`; export r; \ + s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ + $(SET_LIB_PATH) \ + (cd fastjar && $(MAKE) $(FLAGS_TO_PASS) all) -.PHONY: maybe-dvi-target-libjava dvi-target-libjava -maybe-dvi-target-libjava: +.PHONY: check-fastjar maybe-check-fastjar +maybe-check-fastjar: -dvi-target-libjava: \ - configure-target-libjava - @[ -f $(TARGET_SUBDIR)/libjava/Makefile ] || exit 0 ; \ - r=`${PWD_COMMAND}`; export r; \ +# This module is only tested in a native toolchain. +check-fastjar: + @if [ '$(host)' = '$(target)' ] ; then \ + r=`${PWD_COMMAND}`; export r; \ + s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ + $(SET_LIB_PATH) \ + (cd fastjar && $(MAKE) $(FLAGS_TO_PASS) check); \ + fi + + +.PHONY: install-fastjar maybe-install-fastjar +maybe-install-fastjar: + +install-fastjar: installdirs + @r=`${PWD_COMMAND}`; export r; \ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ $(SET_LIB_PATH) \ - echo "Doing dvi in $(TARGET_SUBDIR)/libjava" ; \ - for flag in $(EXTRA_TARGET_FLAGS); do \ - eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \ - done; \ - (cd $(TARGET_SUBDIR)/libjava && \ - $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \ - "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \ - "RANLIB=$${RANLIB}" \ - "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" \ - dvi) \ - || exit 1 + (cd fastjar && $(MAKE) $(FLAGS_TO_PASS) install) -.PHONY: maybe-dvi-target-zlib dvi-target-zlib -maybe-dvi-target-zlib: +# Other targets (info, dvi, etc.) -dvi-target-zlib: \ - configure-target-zlib - @[ -f $(TARGET_SUBDIR)/zlib/Makefile ] || exit 0 ; \ +.PHONY: maybe-info-fastjar info-fastjar +maybe-info-fastjar: + +info-fastjar: \ + configure-fastjar + @[ -f ./fastjar/Makefile ] || exit 0; \ r=`${PWD_COMMAND}`; export r; \ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ $(SET_LIB_PATH) \ - echo "Doing dvi in $(TARGET_SUBDIR)/zlib" ; \ - for flag in $(EXTRA_TARGET_FLAGS); do \ + for flag in $(EXTRA_HOST_FLAGS); do \ eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \ done; \ - (cd $(TARGET_SUBDIR)/zlib && \ + echo "Doing info in fastjar" ; \ + (cd fastjar && \ $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \ "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \ "RANLIB=$${RANLIB}" \ "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" \ - dvi) \ + info) \ || exit 1 -.PHONY: maybe-dvi-target-boehm-gc dvi-target-boehm-gc -maybe-dvi-target-boehm-gc: +.PHONY: maybe-dvi-fastjar dvi-fastjar +maybe-dvi-fastjar: -dvi-target-boehm-gc: \ - configure-target-boehm-gc - @[ -f $(TARGET_SUBDIR)/boehm-gc/Makefile ] || exit 0 ; \ +dvi-fastjar: \ + configure-fastjar + @[ -f ./fastjar/Makefile ] || exit 0; \ r=`${PWD_COMMAND}`; export r; \ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ $(SET_LIB_PATH) \ - echo "Doing dvi in $(TARGET_SUBDIR)/boehm-gc" ; \ - for flag in $(EXTRA_TARGET_FLAGS); do \ + for flag in $(EXTRA_HOST_FLAGS); do \ eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \ done; \ - (cd $(TARGET_SUBDIR)/boehm-gc && \ + echo "Doing dvi in fastjar" ; \ + (cd fastjar && \ $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \ "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \ "RANLIB=$${RANLIB}" \ @@ -4439,332 +5798,285 @@ dvi-target-boehm-gc: \ || exit 1 -.PHONY: maybe-dvi-target-qthreads dvi-target-qthreads -maybe-dvi-target-qthreads: +.PHONY: maybe-TAGS-fastjar TAGS-fastjar +maybe-TAGS-fastjar: -dvi-target-qthreads: \ - configure-target-qthreads - @[ -f $(TARGET_SUBDIR)/qthreads/Makefile ] || exit 0 ; \ +TAGS-fastjar: \ + configure-fastjar + @[ -f ./fastjar/Makefile ] || exit 0; \ r=`${PWD_COMMAND}`; export r; \ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ $(SET_LIB_PATH) \ - echo "Doing dvi in $(TARGET_SUBDIR)/qthreads" ; \ - for flag in $(EXTRA_TARGET_FLAGS); do \ + for flag in $(EXTRA_HOST_FLAGS); do \ eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \ done; \ - (cd $(TARGET_SUBDIR)/qthreads && \ + echo "Doing TAGS in fastjar" ; \ + (cd fastjar && \ $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \ "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \ "RANLIB=$${RANLIB}" \ "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" \ - dvi) \ + TAGS) \ || exit 1 -.PHONY: maybe-dvi-target-rda dvi-target-rda -maybe-dvi-target-rda: +.PHONY: maybe-install-info-fastjar install-info-fastjar +maybe-install-info-fastjar: -dvi-target-rda: \ - configure-target-rda - @[ -f $(TARGET_SUBDIR)/rda/Makefile ] || exit 0 ; \ +install-info-fastjar: \ + configure-fastjar \ + info-fastjar + @[ -f ./fastjar/Makefile ] || exit 0; \ r=`${PWD_COMMAND}`; export r; \ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ $(SET_LIB_PATH) \ - echo "Doing dvi in $(TARGET_SUBDIR)/rda" ; \ - for flag in $(EXTRA_TARGET_FLAGS); do \ + for flag in $(EXTRA_HOST_FLAGS); do \ eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \ done; \ - (cd $(TARGET_SUBDIR)/rda && \ + echo "Doing install-info in fastjar" ; \ + (cd fastjar && \ $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \ "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \ "RANLIB=$${RANLIB}" \ "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" \ - dvi) \ + install-info) \ || exit 1 -.PHONY: maybe-dvi-target-libada dvi-target-libada -maybe-dvi-target-libada: +.PHONY: maybe-installcheck-fastjar installcheck-fastjar +maybe-installcheck-fastjar: -dvi-target-libada: \ - configure-target-libada - @[ -f $(TARGET_SUBDIR)/libada/Makefile ] || exit 0 ; \ +installcheck-fastjar: \ + configure-fastjar + @[ -f ./fastjar/Makefile ] || exit 0; \ r=`${PWD_COMMAND}`; export r; \ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ $(SET_LIB_PATH) \ - echo "Doing dvi in $(TARGET_SUBDIR)/libada" ; \ - for flag in $(EXTRA_TARGET_FLAGS); do \ + for flag in $(EXTRA_HOST_FLAGS); do \ eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \ done; \ - (cd $(TARGET_SUBDIR)/libada && \ + echo "Doing installcheck in fastjar" ; \ + (cd fastjar && \ $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \ "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \ "RANLIB=$${RANLIB}" \ "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" \ - dvi) \ + installcheck) \ || exit 1 +.PHONY: maybe-mostlyclean-fastjar mostlyclean-fastjar +maybe-mostlyclean-fastjar: -.PHONY: do-TAGS -do-TAGS: TAGS-host TAGS-target - -.PHONY: TAGS-host -TAGS-host: maybe-TAGS-gcc \ - maybe-TAGS-ash \ - maybe-TAGS-autoconf \ - maybe-TAGS-automake \ - maybe-TAGS-bash \ - maybe-TAGS-bfd \ - maybe-TAGS-opcodes \ - maybe-TAGS-binutils \ - maybe-TAGS-bison \ - maybe-TAGS-byacc \ - maybe-TAGS-bzip2 \ - maybe-TAGS-dejagnu \ - maybe-TAGS-diff \ - maybe-TAGS-dosutils \ - maybe-TAGS-etc \ - maybe-TAGS-fastjar \ - maybe-TAGS-fileutils \ - maybe-TAGS-findutils \ - maybe-TAGS-find \ - maybe-TAGS-flex \ - maybe-TAGS-gas \ - maybe-TAGS-gawk \ - maybe-TAGS-gettext \ - maybe-TAGS-gnuserv \ - maybe-TAGS-gprof \ - maybe-TAGS-gzip \ - maybe-TAGS-hello \ - maybe-TAGS-indent \ - maybe-TAGS-intl \ - maybe-TAGS-tcl \ - maybe-TAGS-itcl \ - maybe-TAGS-ld \ - maybe-TAGS-libgui \ - maybe-TAGS-libiberty \ - maybe-TAGS-libtool \ - maybe-TAGS-m4 \ - maybe-TAGS-make \ - maybe-TAGS-mmalloc \ - maybe-TAGS-patch \ - maybe-TAGS-perl \ - maybe-TAGS-prms \ - maybe-TAGS-rcs \ - maybe-TAGS-readline \ - maybe-TAGS-release \ - maybe-TAGS-recode \ - maybe-TAGS-sed \ - maybe-TAGS-send-pr \ - maybe-TAGS-shellutils \ - maybe-TAGS-sid \ - maybe-TAGS-sim \ - maybe-TAGS-tar \ - maybe-TAGS-texinfo \ - maybe-TAGS-textutils \ - maybe-TAGS-time \ - maybe-TAGS-uudecode \ - maybe-TAGS-wdiff \ - maybe-TAGS-zip \ - maybe-TAGS-zlib \ - maybe-TAGS-gdb \ - maybe-TAGS-expect \ - maybe-TAGS-guile \ - maybe-TAGS-tk \ - maybe-TAGS-tix \ - maybe-TAGS-libtermcap \ - maybe-TAGS-utils - -.PHONY: TAGS-target -TAGS-target: \ - maybe-TAGS-target-libstdc++-v3 \ - maybe-TAGS-target-newlib \ - maybe-TAGS-target-libf2c \ - maybe-TAGS-target-libobjc \ - maybe-TAGS-target-libtermcap \ - maybe-TAGS-target-winsup \ - maybe-TAGS-target-libgloss \ - maybe-TAGS-target-libiberty \ - maybe-TAGS-target-gperf \ - maybe-TAGS-target-examples \ - maybe-TAGS-target-libffi \ - maybe-TAGS-target-libjava \ - maybe-TAGS-target-zlib \ - maybe-TAGS-target-boehm-gc \ - maybe-TAGS-target-qthreads \ - maybe-TAGS-target-rda \ - maybe-TAGS-target-libada - -# GCC, the eternal special case -.PHONY: maybe-TAGS-gcc TAGS-gcc -maybe-TAGS-gcc: -TAGS-gcc: \ - configure-gcc - @[ -f ./gcc/Makefile ] || exit 0; \ +mostlyclean-fastjar: + @[ -f ./fastjar/Makefile ] || exit 0; \ r=`${PWD_COMMAND}`; export r; \ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ $(SET_LIB_PATH) \ - for flag in $(EXTRA_GCC_FLAGS); do \ + for flag in $(EXTRA_HOST_FLAGS); do \ eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \ done; \ - echo "Doing TAGS in gcc" ; \ - (cd gcc && \ + echo "Doing mostlyclean in fastjar" ; \ + (cd fastjar && \ $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \ "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \ "RANLIB=$${RANLIB}" \ "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" \ - TAGS) \ + mostlyclean) \ || exit 1 -# Host modules. -.PHONY: maybe-TAGS-ash TAGS-ash -maybe-TAGS-ash: +.PHONY: maybe-clean-fastjar clean-fastjar +maybe-clean-fastjar: -TAGS-ash: \ - configure-ash - @[ -f ./ash/Makefile ] || exit 0; \ +clean-fastjar: + @[ -f ./fastjar/Makefile ] || exit 0; \ r=`${PWD_COMMAND}`; export r; \ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ $(SET_LIB_PATH) \ for flag in $(EXTRA_HOST_FLAGS); do \ eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \ done; \ - echo "Doing TAGS in ash" ; \ - (cd ash && \ + echo "Doing clean in fastjar" ; \ + (cd fastjar && \ $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \ "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \ "RANLIB=$${RANLIB}" \ "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" \ - TAGS) \ + clean) \ || exit 1 -.PHONY: maybe-TAGS-autoconf TAGS-autoconf -maybe-TAGS-autoconf: +.PHONY: maybe-distclean-fastjar distclean-fastjar +maybe-distclean-fastjar: -TAGS-autoconf: \ - configure-autoconf - @[ -f ./autoconf/Makefile ] || exit 0; \ +distclean-fastjar: + @[ -f ./fastjar/Makefile ] || exit 0; \ r=`${PWD_COMMAND}`; export r; \ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ $(SET_LIB_PATH) \ for flag in $(EXTRA_HOST_FLAGS); do \ eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \ done; \ - echo "Doing TAGS in autoconf" ; \ - (cd autoconf && \ + echo "Doing distclean in fastjar" ; \ + (cd fastjar && \ $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \ "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \ "RANLIB=$${RANLIB}" \ "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" \ - TAGS) \ + distclean) \ || exit 1 -.PHONY: maybe-TAGS-automake TAGS-automake -maybe-TAGS-automake: +.PHONY: maybe-maintainer-clean-fastjar maintainer-clean-fastjar +maybe-maintainer-clean-fastjar: -TAGS-automake: \ - configure-automake - @[ -f ./automake/Makefile ] || exit 0; \ +maintainer-clean-fastjar: + @[ -f ./fastjar/Makefile ] || exit 0; \ r=`${PWD_COMMAND}`; export r; \ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ $(SET_LIB_PATH) \ for flag in $(EXTRA_HOST_FLAGS); do \ eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \ done; \ - echo "Doing TAGS in automake" ; \ - (cd automake && \ + echo "Doing maintainer-clean in fastjar" ; \ + (cd fastjar && \ $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \ "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \ "RANLIB=$${RANLIB}" \ "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" \ - TAGS) \ + maintainer-clean) \ || exit 1 -.PHONY: maybe-TAGS-bash TAGS-bash -maybe-TAGS-bash: -TAGS-bash: \ - configure-bash - @[ -f ./bash/Makefile ] || exit 0; \ +.PHONY: configure-fileutils maybe-configure-fileutils +maybe-configure-fileutils: +configure-fileutils: + @test ! -f fileutils/Makefile || exit 0; \ + [ -d fileutils ] || mkdir fileutils; \ r=`${PWD_COMMAND}`; export r; \ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ - $(SET_LIB_PATH) \ - for flag in $(EXTRA_HOST_FLAGS); do \ - eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \ - done; \ - echo "Doing TAGS in bash" ; \ - (cd bash && \ - $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \ - "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \ - "RANLIB=$${RANLIB}" \ - "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" \ - TAGS) \ + CC="$(CC)"; export CC; \ + CFLAGS="$(CFLAGS)"; export CFLAGS; \ + CONFIG_SHELL="$(SHELL)"; export CONFIG_SHELL; \ + CXX="$(CXX)"; export CXX; \ + CXXFLAGS="$(CXXFLAGS)"; export CXXFLAGS; \ + AR="$(AR)"; export AR; \ + AS="$(AS)"; export AS; \ + CC_FOR_BUILD="$(CC_FOR_BUILD)"; export CC_FOR_BUILD; \ + DLLTOOL="$(DLLTOOL)"; export DLLTOOL; \ + LD="$(LD)"; export LD; \ + NM="$(NM)"; export NM; \ + RANLIB="$(RANLIB)"; export RANLIB; \ + WINDRES="$(WINDRES)"; export WINDRES; \ + OBJCOPY="$(OBJCOPY)"; export OBJCOPY; \ + OBJDUMP="$(OBJDUMP)"; export OBJDUMP; \ + echo Configuring in fileutils; \ + cd fileutils || exit 1; \ + case $(srcdir) in \ + \.) \ + srcdiroption="--srcdir=."; \ + libsrcdir=".";; \ + /* | [A-Za-z]:[\\/]*) \ + srcdiroption="--srcdir=$(srcdir)/fileutils"; \ + libsrcdir="$$s/fileutils";; \ + *) \ + srcdiroption="--srcdir=../$(srcdir)/fileutils"; \ + libsrcdir="$$s/fileutils";; \ + esac; \ + $(SHELL) $${libsrcdir}/configure \ + $(HOST_CONFIGARGS) $${srcdiroption} \ || exit 1 +.PHONY: all-fileutils maybe-all-fileutils +maybe-all-fileutils: +all-fileutils: configure-fileutils + @r=`${PWD_COMMAND}`; export r; \ + s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ + $(SET_LIB_PATH) \ + (cd fileutils && $(MAKE) $(FLAGS_TO_PASS) all) -.PHONY: maybe-TAGS-bfd TAGS-bfd -maybe-TAGS-bfd: +.PHONY: check-fileutils maybe-check-fileutils +maybe-check-fileutils: -TAGS-bfd: \ - configure-bfd - @[ -f ./bfd/Makefile ] || exit 0; \ +check-fileutils: + @r=`${PWD_COMMAND}`; export r; \ + s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ + $(SET_LIB_PATH) \ + (cd fileutils && $(MAKE) $(FLAGS_TO_PASS) check) + + +.PHONY: install-fileutils maybe-install-fileutils +maybe-install-fileutils: + +install-fileutils: installdirs + @r=`${PWD_COMMAND}`; export r; \ + s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ + $(SET_LIB_PATH) \ + (cd fileutils && $(MAKE) $(FLAGS_TO_PASS) install) + + +# Other targets (info, dvi, etc.) + +.PHONY: maybe-info-fileutils info-fileutils +maybe-info-fileutils: + +info-fileutils: \ + configure-fileutils + @[ -f ./fileutils/Makefile ] || exit 0; \ r=`${PWD_COMMAND}`; export r; \ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ $(SET_LIB_PATH) \ for flag in $(EXTRA_HOST_FLAGS); do \ eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \ done; \ - echo "Doing TAGS in bfd" ; \ - (cd bfd && \ + echo "Doing info in fileutils" ; \ + (cd fileutils && \ $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \ "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \ "RANLIB=$${RANLIB}" \ "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" \ - TAGS) \ + info) \ || exit 1 -.PHONY: maybe-TAGS-opcodes TAGS-opcodes -maybe-TAGS-opcodes: +.PHONY: maybe-dvi-fileutils dvi-fileutils +maybe-dvi-fileutils: -TAGS-opcodes: \ - configure-opcodes - @[ -f ./opcodes/Makefile ] || exit 0; \ +dvi-fileutils: \ + configure-fileutils + @[ -f ./fileutils/Makefile ] || exit 0; \ r=`${PWD_COMMAND}`; export r; \ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ $(SET_LIB_PATH) \ for flag in $(EXTRA_HOST_FLAGS); do \ eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \ done; \ - echo "Doing TAGS in opcodes" ; \ - (cd opcodes && \ + echo "Doing dvi in fileutils" ; \ + (cd fileutils && \ $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \ "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \ "RANLIB=$${RANLIB}" \ "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" \ - TAGS) \ + dvi) \ || exit 1 -.PHONY: maybe-TAGS-binutils TAGS-binutils -maybe-TAGS-binutils: +.PHONY: maybe-TAGS-fileutils TAGS-fileutils +maybe-TAGS-fileutils: -TAGS-binutils: \ - configure-binutils - @[ -f ./binutils/Makefile ] || exit 0; \ +TAGS-fileutils: \ + configure-fileutils + @[ -f ./fileutils/Makefile ] || exit 0; \ r=`${PWD_COMMAND}`; export r; \ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ $(SET_LIB_PATH) \ for flag in $(EXTRA_HOST_FLAGS); do \ eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \ done; \ - echo "Doing TAGS in binutils" ; \ - (cd binutils && \ + echo "Doing TAGS in fileutils" ; \ + (cd fileutils && \ $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \ "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \ "RANLIB=$${RANLIB}" \ @@ -4773,201 +6085,246 @@ TAGS-binutils: \ || exit 1 -.PHONY: maybe-TAGS-bison TAGS-bison -maybe-TAGS-bison: +.PHONY: maybe-install-info-fileutils install-info-fileutils +maybe-install-info-fileutils: -TAGS-bison: \ - configure-bison - @[ -f ./bison/Makefile ] || exit 0; \ +install-info-fileutils: \ + configure-fileutils \ + info-fileutils + @[ -f ./fileutils/Makefile ] || exit 0; \ r=`${PWD_COMMAND}`; export r; \ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ $(SET_LIB_PATH) \ for flag in $(EXTRA_HOST_FLAGS); do \ eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \ done; \ - echo "Doing TAGS in bison" ; \ - (cd bison && \ + echo "Doing install-info in fileutils" ; \ + (cd fileutils && \ $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \ "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \ "RANLIB=$${RANLIB}" \ "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" \ - TAGS) \ + install-info) \ || exit 1 -.PHONY: maybe-TAGS-byacc TAGS-byacc -maybe-TAGS-byacc: +.PHONY: maybe-installcheck-fileutils installcheck-fileutils +maybe-installcheck-fileutils: -TAGS-byacc: \ - configure-byacc - @[ -f ./byacc/Makefile ] || exit 0; \ +installcheck-fileutils: \ + configure-fileutils + @[ -f ./fileutils/Makefile ] || exit 0; \ r=`${PWD_COMMAND}`; export r; \ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ $(SET_LIB_PATH) \ for flag in $(EXTRA_HOST_FLAGS); do \ eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \ done; \ - echo "Doing TAGS in byacc" ; \ - (cd byacc && \ + echo "Doing installcheck in fileutils" ; \ + (cd fileutils && \ $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \ "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \ "RANLIB=$${RANLIB}" \ "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" \ - TAGS) \ + installcheck) \ || exit 1 -.PHONY: maybe-TAGS-bzip2 TAGS-bzip2 -maybe-TAGS-bzip2: +.PHONY: maybe-mostlyclean-fileutils mostlyclean-fileutils +maybe-mostlyclean-fileutils: -TAGS-bzip2: \ - configure-bzip2 - @[ -f ./bzip2/Makefile ] || exit 0; \ +mostlyclean-fileutils: + @[ -f ./fileutils/Makefile ] || exit 0; \ r=`${PWD_COMMAND}`; export r; \ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ $(SET_LIB_PATH) \ for flag in $(EXTRA_HOST_FLAGS); do \ eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \ done; \ - echo "Doing TAGS in bzip2" ; \ - (cd bzip2 && \ + echo "Doing mostlyclean in fileutils" ; \ + (cd fileutils && \ $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \ "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \ "RANLIB=$${RANLIB}" \ "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" \ - TAGS) \ + mostlyclean) \ || exit 1 -.PHONY: maybe-TAGS-dejagnu TAGS-dejagnu -maybe-TAGS-dejagnu: +.PHONY: maybe-clean-fileutils clean-fileutils +maybe-clean-fileutils: -TAGS-dejagnu: \ - configure-dejagnu - @[ -f ./dejagnu/Makefile ] || exit 0; \ +clean-fileutils: + @[ -f ./fileutils/Makefile ] || exit 0; \ r=`${PWD_COMMAND}`; export r; \ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ $(SET_LIB_PATH) \ for flag in $(EXTRA_HOST_FLAGS); do \ eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \ done; \ - echo "Doing TAGS in dejagnu" ; \ - (cd dejagnu && \ + echo "Doing clean in fileutils" ; \ + (cd fileutils && \ $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \ "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \ "RANLIB=$${RANLIB}" \ "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" \ - TAGS) \ + clean) \ || exit 1 -.PHONY: maybe-TAGS-diff TAGS-diff -maybe-TAGS-diff: +.PHONY: maybe-distclean-fileutils distclean-fileutils +maybe-distclean-fileutils: -TAGS-diff: \ - configure-diff - @[ -f ./diff/Makefile ] || exit 0; \ +distclean-fileutils: + @[ -f ./fileutils/Makefile ] || exit 0; \ r=`${PWD_COMMAND}`; export r; \ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ $(SET_LIB_PATH) \ for flag in $(EXTRA_HOST_FLAGS); do \ eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \ done; \ - echo "Doing TAGS in diff" ; \ - (cd diff && \ + echo "Doing distclean in fileutils" ; \ + (cd fileutils && \ $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \ "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \ "RANLIB=$${RANLIB}" \ "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" \ - TAGS) \ + distclean) \ || exit 1 -.PHONY: maybe-TAGS-dosutils TAGS-dosutils -maybe-TAGS-dosutils: +.PHONY: maybe-maintainer-clean-fileutils maintainer-clean-fileutils +maybe-maintainer-clean-fileutils: -TAGS-dosutils: \ - configure-dosutils - @[ -f ./dosutils/Makefile ] || exit 0; \ +maintainer-clean-fileutils: + @[ -f ./fileutils/Makefile ] || exit 0; \ r=`${PWD_COMMAND}`; export r; \ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ $(SET_LIB_PATH) \ for flag in $(EXTRA_HOST_FLAGS); do \ eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \ done; \ - echo "Doing TAGS in dosutils" ; \ - (cd dosutils && \ + echo "Doing maintainer-clean in fileutils" ; \ + (cd fileutils && \ $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \ "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \ "RANLIB=$${RANLIB}" \ "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" \ - TAGS) \ + maintainer-clean) \ || exit 1 -.PHONY: maybe-TAGS-etc TAGS-etc -maybe-TAGS-etc: -TAGS-etc: \ - configure-etc - @[ -f ./etc/Makefile ] || exit 0; \ +.PHONY: configure-findutils maybe-configure-findutils +maybe-configure-findutils: +configure-findutils: + @test ! -f findutils/Makefile || exit 0; \ + [ -d findutils ] || mkdir findutils; \ r=`${PWD_COMMAND}`; export r; \ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ - $(SET_LIB_PATH) \ - for flag in $(EXTRA_HOST_FLAGS); do \ - eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \ - done; \ - echo "Doing TAGS in etc" ; \ - (cd etc && \ - $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \ - "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \ - "RANLIB=$${RANLIB}" \ - "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" \ - TAGS) \ + CC="$(CC)"; export CC; \ + CFLAGS="$(CFLAGS)"; export CFLAGS; \ + CONFIG_SHELL="$(SHELL)"; export CONFIG_SHELL; \ + CXX="$(CXX)"; export CXX; \ + CXXFLAGS="$(CXXFLAGS)"; export CXXFLAGS; \ + AR="$(AR)"; export AR; \ + AS="$(AS)"; export AS; \ + CC_FOR_BUILD="$(CC_FOR_BUILD)"; export CC_FOR_BUILD; \ + DLLTOOL="$(DLLTOOL)"; export DLLTOOL; \ + LD="$(LD)"; export LD; \ + NM="$(NM)"; export NM; \ + RANLIB="$(RANLIB)"; export RANLIB; \ + WINDRES="$(WINDRES)"; export WINDRES; \ + OBJCOPY="$(OBJCOPY)"; export OBJCOPY; \ + OBJDUMP="$(OBJDUMP)"; export OBJDUMP; \ + echo Configuring in findutils; \ + cd findutils || exit 1; \ + case $(srcdir) in \ + \.) \ + srcdiroption="--srcdir=."; \ + libsrcdir=".";; \ + /* | [A-Za-z]:[\\/]*) \ + srcdiroption="--srcdir=$(srcdir)/findutils"; \ + libsrcdir="$$s/findutils";; \ + *) \ + srcdiroption="--srcdir=../$(srcdir)/findutils"; \ + libsrcdir="$$s/findutils";; \ + esac; \ + $(SHELL) $${libsrcdir}/configure \ + $(HOST_CONFIGARGS) $${srcdiroption} \ || exit 1 +.PHONY: all-findutils maybe-all-findutils +maybe-all-findutils: +all-findutils: configure-findutils + @r=`${PWD_COMMAND}`; export r; \ + s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ + $(SET_LIB_PATH) \ + (cd findutils && $(MAKE) $(FLAGS_TO_PASS) all) -.PHONY: maybe-TAGS-fastjar TAGS-fastjar -maybe-TAGS-fastjar: +.PHONY: check-findutils maybe-check-findutils +maybe-check-findutils: -TAGS-fastjar: \ - configure-fastjar - @[ -f ./fastjar/Makefile ] || exit 0; \ +check-findutils: + @r=`${PWD_COMMAND}`; export r; \ + s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ + $(SET_LIB_PATH) \ + (cd findutils && $(MAKE) $(FLAGS_TO_PASS) check) + + +.PHONY: install-findutils maybe-install-findutils +maybe-install-findutils: + +install-findutils: installdirs + @r=`${PWD_COMMAND}`; export r; \ + s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ + $(SET_LIB_PATH) \ + (cd findutils && $(MAKE) $(FLAGS_TO_PASS) install) + + +# Other targets (info, dvi, etc.) + +.PHONY: maybe-info-findutils info-findutils +maybe-info-findutils: + +info-findutils: \ + configure-findutils + @[ -f ./findutils/Makefile ] || exit 0; \ r=`${PWD_COMMAND}`; export r; \ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ $(SET_LIB_PATH) \ for flag in $(EXTRA_HOST_FLAGS); do \ eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \ done; \ - echo "Doing TAGS in fastjar" ; \ - (cd fastjar && \ + echo "Doing info in findutils" ; \ + (cd findutils && \ $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \ "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \ "RANLIB=$${RANLIB}" \ "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" \ - TAGS) \ + info) \ || exit 1 -.PHONY: maybe-TAGS-fileutils TAGS-fileutils -maybe-TAGS-fileutils: +.PHONY: maybe-dvi-findutils dvi-findutils +maybe-dvi-findutils: -TAGS-fileutils: \ - configure-fileutils - @[ -f ./fileutils/Makefile ] || exit 0; \ +dvi-findutils: \ + configure-findutils + @[ -f ./findutils/Makefile ] || exit 0; \ r=`${PWD_COMMAND}`; export r; \ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ $(SET_LIB_PATH) \ for flag in $(EXTRA_HOST_FLAGS); do \ eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \ done; \ - echo "Doing TAGS in fileutils" ; \ - (cd fileutils && \ + echo "Doing dvi in findutils" ; \ + (cd findutils && \ $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \ "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \ "RANLIB=$${RANLIB}" \ "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" \ - TAGS) \ + dvi) \ || exit 1 @@ -4993,262 +6350,263 @@ TAGS-findutils: \ || exit 1 -.PHONY: maybe-TAGS-find TAGS-find -maybe-TAGS-find: +.PHONY: maybe-install-info-findutils install-info-findutils +maybe-install-info-findutils: -TAGS-find: \ - configure-find - @[ -f ./find/Makefile ] || exit 0; \ +install-info-findutils: \ + configure-findutils \ + info-findutils + @[ -f ./findutils/Makefile ] || exit 0; \ r=`${PWD_COMMAND}`; export r; \ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ $(SET_LIB_PATH) \ for flag in $(EXTRA_HOST_FLAGS); do \ eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \ done; \ - echo "Doing TAGS in find" ; \ - (cd find && \ + echo "Doing install-info in findutils" ; \ + (cd findutils && \ $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \ "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \ "RANLIB=$${RANLIB}" \ "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" \ - TAGS) \ + install-info) \ || exit 1 -.PHONY: maybe-TAGS-flex TAGS-flex -maybe-TAGS-flex: +.PHONY: maybe-installcheck-findutils installcheck-findutils +maybe-installcheck-findutils: -TAGS-flex: \ - configure-flex - @[ -f ./flex/Makefile ] || exit 0; \ +installcheck-findutils: \ + configure-findutils + @[ -f ./findutils/Makefile ] || exit 0; \ r=`${PWD_COMMAND}`; export r; \ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ $(SET_LIB_PATH) \ for flag in $(EXTRA_HOST_FLAGS); do \ eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \ done; \ - echo "Doing TAGS in flex" ; \ - (cd flex && \ + echo "Doing installcheck in findutils" ; \ + (cd findutils && \ $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \ "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \ "RANLIB=$${RANLIB}" \ "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" \ - TAGS) \ + installcheck) \ || exit 1 -.PHONY: maybe-TAGS-gas TAGS-gas -maybe-TAGS-gas: +.PHONY: maybe-mostlyclean-findutils mostlyclean-findutils +maybe-mostlyclean-findutils: -TAGS-gas: \ - configure-gas - @[ -f ./gas/Makefile ] || exit 0; \ +mostlyclean-findutils: + @[ -f ./findutils/Makefile ] || exit 0; \ r=`${PWD_COMMAND}`; export r; \ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ $(SET_LIB_PATH) \ for flag in $(EXTRA_HOST_FLAGS); do \ eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \ done; \ - echo "Doing TAGS in gas" ; \ - (cd gas && \ + echo "Doing mostlyclean in findutils" ; \ + (cd findutils && \ $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \ "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \ "RANLIB=$${RANLIB}" \ "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" \ - TAGS) \ + mostlyclean) \ || exit 1 -.PHONY: maybe-TAGS-gawk TAGS-gawk -maybe-TAGS-gawk: +.PHONY: maybe-clean-findutils clean-findutils +maybe-clean-findutils: -TAGS-gawk: \ - configure-gawk - @[ -f ./gawk/Makefile ] || exit 0; \ +clean-findutils: + @[ -f ./findutils/Makefile ] || exit 0; \ r=`${PWD_COMMAND}`; export r; \ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ $(SET_LIB_PATH) \ for flag in $(EXTRA_HOST_FLAGS); do \ eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \ done; \ - echo "Doing TAGS in gawk" ; \ - (cd gawk && \ + echo "Doing clean in findutils" ; \ + (cd findutils && \ $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \ "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \ "RANLIB=$${RANLIB}" \ "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" \ - TAGS) \ + clean) \ || exit 1 -.PHONY: maybe-TAGS-gettext TAGS-gettext -maybe-TAGS-gettext: +.PHONY: maybe-distclean-findutils distclean-findutils +maybe-distclean-findutils: -TAGS-gettext: \ - configure-gettext - @[ -f ./gettext/Makefile ] || exit 0; \ +distclean-findutils: + @[ -f ./findutils/Makefile ] || exit 0; \ r=`${PWD_COMMAND}`; export r; \ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ $(SET_LIB_PATH) \ for flag in $(EXTRA_HOST_FLAGS); do \ eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \ done; \ - echo "Doing TAGS in gettext" ; \ - (cd gettext && \ + echo "Doing distclean in findutils" ; \ + (cd findutils && \ $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \ "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \ "RANLIB=$${RANLIB}" \ "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" \ - TAGS) \ + distclean) \ || exit 1 -.PHONY: maybe-TAGS-gnuserv TAGS-gnuserv -maybe-TAGS-gnuserv: +.PHONY: maybe-maintainer-clean-findutils maintainer-clean-findutils +maybe-maintainer-clean-findutils: -TAGS-gnuserv: \ - configure-gnuserv - @[ -f ./gnuserv/Makefile ] || exit 0; \ +maintainer-clean-findutils: + @[ -f ./findutils/Makefile ] || exit 0; \ r=`${PWD_COMMAND}`; export r; \ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ $(SET_LIB_PATH) \ for flag in $(EXTRA_HOST_FLAGS); do \ eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \ done; \ - echo "Doing TAGS in gnuserv" ; \ - (cd gnuserv && \ + echo "Doing maintainer-clean in findutils" ; \ + (cd findutils && \ $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \ "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \ "RANLIB=$${RANLIB}" \ "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" \ - TAGS) \ + maintainer-clean) \ || exit 1 -.PHONY: maybe-TAGS-gprof TAGS-gprof -maybe-TAGS-gprof: -TAGS-gprof: \ - configure-gprof - @[ -f ./gprof/Makefile ] || exit 0; \ +.PHONY: configure-find maybe-configure-find +maybe-configure-find: +configure-find: + @test ! -f find/Makefile || exit 0; \ + [ -d find ] || mkdir find; \ r=`${PWD_COMMAND}`; export r; \ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ - $(SET_LIB_PATH) \ - for flag in $(EXTRA_HOST_FLAGS); do \ - eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \ - done; \ - echo "Doing TAGS in gprof" ; \ - (cd gprof && \ - $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \ - "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \ - "RANLIB=$${RANLIB}" \ - "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" \ - TAGS) \ + CC="$(CC)"; export CC; \ + CFLAGS="$(CFLAGS)"; export CFLAGS; \ + CONFIG_SHELL="$(SHELL)"; export CONFIG_SHELL; \ + CXX="$(CXX)"; export CXX; \ + CXXFLAGS="$(CXXFLAGS)"; export CXXFLAGS; \ + AR="$(AR)"; export AR; \ + AS="$(AS)"; export AS; \ + CC_FOR_BUILD="$(CC_FOR_BUILD)"; export CC_FOR_BUILD; \ + DLLTOOL="$(DLLTOOL)"; export DLLTOOL; \ + LD="$(LD)"; export LD; \ + NM="$(NM)"; export NM; \ + RANLIB="$(RANLIB)"; export RANLIB; \ + WINDRES="$(WINDRES)"; export WINDRES; \ + OBJCOPY="$(OBJCOPY)"; export OBJCOPY; \ + OBJDUMP="$(OBJDUMP)"; export OBJDUMP; \ + echo Configuring in find; \ + cd find || exit 1; \ + case $(srcdir) in \ + \.) \ + srcdiroption="--srcdir=."; \ + libsrcdir=".";; \ + /* | [A-Za-z]:[\\/]*) \ + srcdiroption="--srcdir=$(srcdir)/find"; \ + libsrcdir="$$s/find";; \ + *) \ + srcdiroption="--srcdir=../$(srcdir)/find"; \ + libsrcdir="$$s/find";; \ + esac; \ + $(SHELL) $${libsrcdir}/configure \ + $(HOST_CONFIGARGS) $${srcdiroption} \ || exit 1 +.PHONY: all-find maybe-all-find +maybe-all-find: +all-find: configure-find + @r=`${PWD_COMMAND}`; export r; \ + s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ + $(SET_LIB_PATH) \ + (cd find && $(MAKE) $(FLAGS_TO_PASS) all) -.PHONY: maybe-TAGS-gzip TAGS-gzip -maybe-TAGS-gzip: +.PHONY: check-find maybe-check-find +maybe-check-find: -TAGS-gzip: \ - configure-gzip - @[ -f ./gzip/Makefile ] || exit 0; \ - r=`${PWD_COMMAND}`; export r; \ +check-find: + @r=`${PWD_COMMAND}`; export r; \ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ $(SET_LIB_PATH) \ - for flag in $(EXTRA_HOST_FLAGS); do \ - eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \ - done; \ - echo "Doing TAGS in gzip" ; \ - (cd gzip && \ - $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \ - "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \ - "RANLIB=$${RANLIB}" \ - "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" \ - TAGS) \ - || exit 1 + (cd find && $(MAKE) $(FLAGS_TO_PASS) check) -.PHONY: maybe-TAGS-hello TAGS-hello -maybe-TAGS-hello: +.PHONY: install-find maybe-install-find +maybe-install-find: -TAGS-hello: \ - configure-hello - @[ -f ./hello/Makefile ] || exit 0; \ - r=`${PWD_COMMAND}`; export r; \ +install-find: installdirs + @r=`${PWD_COMMAND}`; export r; \ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ $(SET_LIB_PATH) \ - for flag in $(EXTRA_HOST_FLAGS); do \ - eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \ - done; \ - echo "Doing TAGS in hello" ; \ - (cd hello && \ - $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \ - "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \ - "RANLIB=$${RANLIB}" \ - "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" \ - TAGS) \ - || exit 1 + (cd find && $(MAKE) $(FLAGS_TO_PASS) install) -.PHONY: maybe-TAGS-indent TAGS-indent -maybe-TAGS-indent: +# Other targets (info, dvi, etc.) -TAGS-indent: \ - configure-indent - @[ -f ./indent/Makefile ] || exit 0; \ +.PHONY: maybe-info-find info-find +maybe-info-find: + +info-find: \ + configure-find + @[ -f ./find/Makefile ] || exit 0; \ r=`${PWD_COMMAND}`; export r; \ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ $(SET_LIB_PATH) \ for flag in $(EXTRA_HOST_FLAGS); do \ eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \ done; \ - echo "Doing TAGS in indent" ; \ - (cd indent && \ + echo "Doing info in find" ; \ + (cd find && \ $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \ "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \ "RANLIB=$${RANLIB}" \ "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" \ - TAGS) \ + info) \ || exit 1 -.PHONY: maybe-TAGS-intl TAGS-intl -maybe-TAGS-intl: +.PHONY: maybe-dvi-find dvi-find +maybe-dvi-find: -TAGS-intl: \ - configure-intl - @[ -f ./intl/Makefile ] || exit 0; \ +dvi-find: \ + configure-find + @[ -f ./find/Makefile ] || exit 0; \ r=`${PWD_COMMAND}`; export r; \ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ $(SET_LIB_PATH) \ for flag in $(EXTRA_HOST_FLAGS); do \ eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \ done; \ - echo "Doing TAGS in intl" ; \ - (cd intl && \ + echo "Doing dvi in find" ; \ + (cd find && \ $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \ "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \ "RANLIB=$${RANLIB}" \ "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" \ - TAGS) \ + dvi) \ || exit 1 -.PHONY: maybe-TAGS-tcl TAGS-tcl -maybe-TAGS-tcl: +.PHONY: maybe-TAGS-find TAGS-find +maybe-TAGS-find: -TAGS-tcl: \ - configure-tcl - @[ -f ./tcl/Makefile ] || exit 0; \ +TAGS-find: \ + configure-find + @[ -f ./find/Makefile ] || exit 0; \ r=`${PWD_COMMAND}`; export r; \ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ $(SET_LIB_PATH) \ for flag in $(EXTRA_HOST_FLAGS); do \ eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \ done; \ - echo "Doing TAGS in tcl" ; \ - (cd tcl && \ + echo "Doing TAGS in find" ; \ + (cd find && \ $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \ "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \ "RANLIB=$${RANLIB}" \ @@ -5257,240 +6615,266 @@ TAGS-tcl: \ || exit 1 -.PHONY: maybe-TAGS-itcl TAGS-itcl -maybe-TAGS-itcl: +.PHONY: maybe-install-info-find install-info-find +maybe-install-info-find: -TAGS-itcl: \ - configure-itcl - @[ -f ./itcl/Makefile ] || exit 0; \ +install-info-find: \ + configure-find \ + info-find + @[ -f ./find/Makefile ] || exit 0; \ r=`${PWD_COMMAND}`; export r; \ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ $(SET_LIB_PATH) \ for flag in $(EXTRA_HOST_FLAGS); do \ eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \ done; \ - echo "Doing TAGS in itcl" ; \ - (cd itcl && \ + echo "Doing install-info in find" ; \ + (cd find && \ $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \ "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \ "RANLIB=$${RANLIB}" \ "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" \ - TAGS) \ + install-info) \ || exit 1 -.PHONY: maybe-TAGS-ld TAGS-ld -maybe-TAGS-ld: +.PHONY: maybe-installcheck-find installcheck-find +maybe-installcheck-find: -TAGS-ld: \ - configure-ld - @[ -f ./ld/Makefile ] || exit 0; \ +installcheck-find: \ + configure-find + @[ -f ./find/Makefile ] || exit 0; \ r=`${PWD_COMMAND}`; export r; \ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ $(SET_LIB_PATH) \ for flag in $(EXTRA_HOST_FLAGS); do \ eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \ done; \ - echo "Doing TAGS in ld" ; \ - (cd ld && \ + echo "Doing installcheck in find" ; \ + (cd find && \ $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \ "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \ "RANLIB=$${RANLIB}" \ "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" \ - TAGS) \ + installcheck) \ || exit 1 -.PHONY: maybe-TAGS-libgui TAGS-libgui -maybe-TAGS-libgui: +.PHONY: maybe-mostlyclean-find mostlyclean-find +maybe-mostlyclean-find: -TAGS-libgui: \ - configure-libgui - @[ -f ./libgui/Makefile ] || exit 0; \ +mostlyclean-find: + @[ -f ./find/Makefile ] || exit 0; \ r=`${PWD_COMMAND}`; export r; \ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ $(SET_LIB_PATH) \ for flag in $(EXTRA_HOST_FLAGS); do \ eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \ done; \ - echo "Doing TAGS in libgui" ; \ - (cd libgui && \ + echo "Doing mostlyclean in find" ; \ + (cd find && \ $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \ "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \ "RANLIB=$${RANLIB}" \ "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" \ - TAGS) \ + mostlyclean) \ || exit 1 -.PHONY: maybe-TAGS-libiberty TAGS-libiberty -maybe-TAGS-libiberty: +.PHONY: maybe-clean-find clean-find +maybe-clean-find: -TAGS-libiberty: \ - configure-libiberty - @[ -f ./libiberty/Makefile ] || exit 0; \ +clean-find: + @[ -f ./find/Makefile ] || exit 0; \ r=`${PWD_COMMAND}`; export r; \ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ $(SET_LIB_PATH) \ for flag in $(EXTRA_HOST_FLAGS); do \ eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \ done; \ - echo "Doing TAGS in libiberty" ; \ - (cd libiberty && \ + echo "Doing clean in find" ; \ + (cd find && \ $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \ "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \ "RANLIB=$${RANLIB}" \ "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" \ - TAGS) \ + clean) \ || exit 1 -.PHONY: maybe-TAGS-libtool TAGS-libtool -maybe-TAGS-libtool: +.PHONY: maybe-distclean-find distclean-find +maybe-distclean-find: -TAGS-libtool: \ - configure-libtool - @[ -f ./libtool/Makefile ] || exit 0; \ +distclean-find: + @[ -f ./find/Makefile ] || exit 0; \ r=`${PWD_COMMAND}`; export r; \ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ $(SET_LIB_PATH) \ for flag in $(EXTRA_HOST_FLAGS); do \ eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \ done; \ - echo "Doing TAGS in libtool" ; \ - (cd libtool && \ + echo "Doing distclean in find" ; \ + (cd find && \ $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \ "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \ "RANLIB=$${RANLIB}" \ "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" \ - TAGS) \ + distclean) \ || exit 1 -.PHONY: maybe-TAGS-m4 TAGS-m4 -maybe-TAGS-m4: +.PHONY: maybe-maintainer-clean-find maintainer-clean-find +maybe-maintainer-clean-find: -TAGS-m4: \ - configure-m4 - @[ -f ./m4/Makefile ] || exit 0; \ +maintainer-clean-find: + @[ -f ./find/Makefile ] || exit 0; \ r=`${PWD_COMMAND}`; export r; \ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ $(SET_LIB_PATH) \ for flag in $(EXTRA_HOST_FLAGS); do \ eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \ done; \ - echo "Doing TAGS in m4" ; \ - (cd m4 && \ + echo "Doing maintainer-clean in find" ; \ + (cd find && \ $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \ "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \ "RANLIB=$${RANLIB}" \ "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" \ - TAGS) \ + maintainer-clean) \ || exit 1 -.PHONY: maybe-TAGS-make TAGS-make -maybe-TAGS-make: -TAGS-make: \ - configure-make - @[ -f ./make/Makefile ] || exit 0; \ +.PHONY: configure-flex maybe-configure-flex +maybe-configure-flex: +configure-flex: + @test ! -f flex/Makefile || exit 0; \ + [ -d flex ] || mkdir flex; \ r=`${PWD_COMMAND}`; export r; \ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ - $(SET_LIB_PATH) \ - for flag in $(EXTRA_HOST_FLAGS); do \ - eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \ - done; \ - echo "Doing TAGS in make" ; \ - (cd make && \ - $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \ - "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \ - "RANLIB=$${RANLIB}" \ - "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" \ - TAGS) \ + CC="$(CC)"; export CC; \ + CFLAGS="$(CFLAGS)"; export CFLAGS; \ + CONFIG_SHELL="$(SHELL)"; export CONFIG_SHELL; \ + CXX="$(CXX)"; export CXX; \ + CXXFLAGS="$(CXXFLAGS)"; export CXXFLAGS; \ + AR="$(AR)"; export AR; \ + AS="$(AS)"; export AS; \ + CC_FOR_BUILD="$(CC_FOR_BUILD)"; export CC_FOR_BUILD; \ + DLLTOOL="$(DLLTOOL)"; export DLLTOOL; \ + LD="$(LD)"; export LD; \ + NM="$(NM)"; export NM; \ + RANLIB="$(RANLIB)"; export RANLIB; \ + WINDRES="$(WINDRES)"; export WINDRES; \ + OBJCOPY="$(OBJCOPY)"; export OBJCOPY; \ + OBJDUMP="$(OBJDUMP)"; export OBJDUMP; \ + echo Configuring in flex; \ + cd flex || exit 1; \ + case $(srcdir) in \ + \.) \ + srcdiroption="--srcdir=."; \ + libsrcdir=".";; \ + /* | [A-Za-z]:[\\/]*) \ + srcdiroption="--srcdir=$(srcdir)/flex"; \ + libsrcdir="$$s/flex";; \ + *) \ + srcdiroption="--srcdir=../$(srcdir)/flex"; \ + libsrcdir="$$s/flex";; \ + esac; \ + $(SHELL) $${libsrcdir}/configure \ + $(HOST_CONFIGARGS) $${srcdiroption} \ || exit 1 +.PHONY: all-flex maybe-all-flex +maybe-all-flex: +all-flex: configure-flex + @r=`${PWD_COMMAND}`; export r; \ + s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ + $(SET_LIB_PATH) \ + (cd flex && $(MAKE) $(FLAGS_TO_PASS) all) -.PHONY: maybe-TAGS-mmalloc TAGS-mmalloc -maybe-TAGS-mmalloc: +.PHONY: check-flex maybe-check-flex +maybe-check-flex: -TAGS-mmalloc: \ - configure-mmalloc - @[ -f ./mmalloc/Makefile ] || exit 0; \ - r=`${PWD_COMMAND}`; export r; \ +# This module is only tested in a native toolchain. +check-flex: + @if [ '$(host)' = '$(target)' ] ; then \ + r=`${PWD_COMMAND}`; export r; \ + s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ + $(SET_LIB_PATH) \ + (cd flex && $(MAKE) $(FLAGS_TO_PASS) check); \ + fi + + +.PHONY: install-flex maybe-install-flex +maybe-install-flex: + +install-flex: installdirs + @r=`${PWD_COMMAND}`; export r; \ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ $(SET_LIB_PATH) \ - for flag in $(EXTRA_HOST_FLAGS); do \ - eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \ - done; \ - echo "Doing TAGS in mmalloc" ; \ - (cd mmalloc && \ - $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \ - "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \ - "RANLIB=$${RANLIB}" \ - "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" \ - TAGS) \ - || exit 1 + (cd flex && $(MAKE) $(FLAGS_TO_PASS) install) -.PHONY: maybe-TAGS-patch TAGS-patch -maybe-TAGS-patch: +# Other targets (info, dvi, etc.) -TAGS-patch: \ - configure-patch - @[ -f ./patch/Makefile ] || exit 0; \ +.PHONY: maybe-info-flex info-flex +maybe-info-flex: + +info-flex: \ + configure-flex + @[ -f ./flex/Makefile ] || exit 0; \ r=`${PWD_COMMAND}`; export r; \ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ $(SET_LIB_PATH) \ for flag in $(EXTRA_HOST_FLAGS); do \ eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \ done; \ - echo "Doing TAGS in patch" ; \ - (cd patch && \ + echo "Doing info in flex" ; \ + (cd flex && \ $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \ "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \ "RANLIB=$${RANLIB}" \ "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" \ - TAGS) \ + info) \ || exit 1 -.PHONY: maybe-TAGS-perl TAGS-perl -maybe-TAGS-perl: +.PHONY: maybe-dvi-flex dvi-flex +maybe-dvi-flex: -TAGS-perl: \ - configure-perl - @[ -f ./perl/Makefile ] || exit 0; \ +dvi-flex: \ + configure-flex + @[ -f ./flex/Makefile ] || exit 0; \ r=`${PWD_COMMAND}`; export r; \ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ $(SET_LIB_PATH) \ for flag in $(EXTRA_HOST_FLAGS); do \ eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \ done; \ - echo "Doing TAGS in perl" ; \ - (cd perl && \ + echo "Doing dvi in flex" ; \ + (cd flex && \ $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \ "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \ "RANLIB=$${RANLIB}" \ "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" \ - TAGS) \ + dvi) \ || exit 1 -.PHONY: maybe-TAGS-prms TAGS-prms -maybe-TAGS-prms: +.PHONY: maybe-TAGS-flex TAGS-flex +maybe-TAGS-flex: -TAGS-prms: \ - configure-prms - @[ -f ./prms/Makefile ] || exit 0; \ +TAGS-flex: \ + configure-flex + @[ -f ./flex/Makefile ] || exit 0; \ r=`${PWD_COMMAND}`; export r; \ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ $(SET_LIB_PATH) \ for flag in $(EXTRA_HOST_FLAGS); do \ eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \ done; \ - echo "Doing TAGS in prms" ; \ - (cd prms && \ + echo "Doing TAGS in flex" ; \ + (cd flex && \ $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \ "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \ "RANLIB=$${RANLIB}" \ @@ -5499,262 +6883,263 @@ TAGS-prms: \ || exit 1 -.PHONY: maybe-TAGS-rcs TAGS-rcs -maybe-TAGS-rcs: +.PHONY: maybe-install-info-flex install-info-flex +maybe-install-info-flex: -TAGS-rcs: \ - configure-rcs - @[ -f ./rcs/Makefile ] || exit 0; \ +install-info-flex: \ + configure-flex \ + info-flex + @[ -f ./flex/Makefile ] || exit 0; \ r=`${PWD_COMMAND}`; export r; \ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ $(SET_LIB_PATH) \ for flag in $(EXTRA_HOST_FLAGS); do \ eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \ done; \ - echo "Doing TAGS in rcs" ; \ - (cd rcs && \ + echo "Doing install-info in flex" ; \ + (cd flex && \ $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \ "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \ "RANLIB=$${RANLIB}" \ "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" \ - TAGS) \ + install-info) \ || exit 1 -.PHONY: maybe-TAGS-readline TAGS-readline -maybe-TAGS-readline: +.PHONY: maybe-installcheck-flex installcheck-flex +maybe-installcheck-flex: -TAGS-readline: \ - configure-readline - @[ -f ./readline/Makefile ] || exit 0; \ +installcheck-flex: \ + configure-flex + @[ -f ./flex/Makefile ] || exit 0; \ r=`${PWD_COMMAND}`; export r; \ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ $(SET_LIB_PATH) \ for flag in $(EXTRA_HOST_FLAGS); do \ eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \ done; \ - echo "Doing TAGS in readline" ; \ - (cd readline && \ + echo "Doing installcheck in flex" ; \ + (cd flex && \ $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \ "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \ "RANLIB=$${RANLIB}" \ "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" \ - TAGS) \ + installcheck) \ || exit 1 -.PHONY: maybe-TAGS-release TAGS-release -maybe-TAGS-release: +.PHONY: maybe-mostlyclean-flex mostlyclean-flex +maybe-mostlyclean-flex: -TAGS-release: \ - configure-release - @[ -f ./release/Makefile ] || exit 0; \ +mostlyclean-flex: + @[ -f ./flex/Makefile ] || exit 0; \ r=`${PWD_COMMAND}`; export r; \ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ $(SET_LIB_PATH) \ for flag in $(EXTRA_HOST_FLAGS); do \ eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \ done; \ - echo "Doing TAGS in release" ; \ - (cd release && \ + echo "Doing mostlyclean in flex" ; \ + (cd flex && \ $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \ "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \ "RANLIB=$${RANLIB}" \ "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" \ - TAGS) \ + mostlyclean) \ || exit 1 -.PHONY: maybe-TAGS-recode TAGS-recode -maybe-TAGS-recode: +.PHONY: maybe-clean-flex clean-flex +maybe-clean-flex: -TAGS-recode: \ - configure-recode - @[ -f ./recode/Makefile ] || exit 0; \ +clean-flex: + @[ -f ./flex/Makefile ] || exit 0; \ r=`${PWD_COMMAND}`; export r; \ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ $(SET_LIB_PATH) \ for flag in $(EXTRA_HOST_FLAGS); do \ eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \ done; \ - echo "Doing TAGS in recode" ; \ - (cd recode && \ + echo "Doing clean in flex" ; \ + (cd flex && \ $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \ "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \ "RANLIB=$${RANLIB}" \ "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" \ - TAGS) \ + clean) \ || exit 1 -.PHONY: maybe-TAGS-sed TAGS-sed -maybe-TAGS-sed: +.PHONY: maybe-distclean-flex distclean-flex +maybe-distclean-flex: -TAGS-sed: \ - configure-sed - @[ -f ./sed/Makefile ] || exit 0; \ +distclean-flex: + @[ -f ./flex/Makefile ] || exit 0; \ r=`${PWD_COMMAND}`; export r; \ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ $(SET_LIB_PATH) \ for flag in $(EXTRA_HOST_FLAGS); do \ eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \ done; \ - echo "Doing TAGS in sed" ; \ - (cd sed && \ + echo "Doing distclean in flex" ; \ + (cd flex && \ $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \ "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \ "RANLIB=$${RANLIB}" \ "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" \ - TAGS) \ + distclean) \ || exit 1 -.PHONY: maybe-TAGS-send-pr TAGS-send-pr -maybe-TAGS-send-pr: +.PHONY: maybe-maintainer-clean-flex maintainer-clean-flex +maybe-maintainer-clean-flex: -TAGS-send-pr: \ - configure-send-pr - @[ -f ./send-pr/Makefile ] || exit 0; \ +maintainer-clean-flex: + @[ -f ./flex/Makefile ] || exit 0; \ r=`${PWD_COMMAND}`; export r; \ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ $(SET_LIB_PATH) \ for flag in $(EXTRA_HOST_FLAGS); do \ eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \ done; \ - echo "Doing TAGS in send-pr" ; \ - (cd send-pr && \ + echo "Doing maintainer-clean in flex" ; \ + (cd flex && \ $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \ "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \ "RANLIB=$${RANLIB}" \ "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" \ - TAGS) \ + maintainer-clean) \ || exit 1 -.PHONY: maybe-TAGS-shellutils TAGS-shellutils -maybe-TAGS-shellutils: -TAGS-shellutils: \ - configure-shellutils - @[ -f ./shellutils/Makefile ] || exit 0; \ +.PHONY: configure-gas maybe-configure-gas +maybe-configure-gas: +configure-gas: + @test ! -f gas/Makefile || exit 0; \ + [ -d gas ] || mkdir gas; \ r=`${PWD_COMMAND}`; export r; \ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ - $(SET_LIB_PATH) \ - for flag in $(EXTRA_HOST_FLAGS); do \ - eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \ - done; \ - echo "Doing TAGS in shellutils" ; \ - (cd shellutils && \ - $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \ - "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \ - "RANLIB=$${RANLIB}" \ - "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" \ - TAGS) \ + CC="$(CC)"; export CC; \ + CFLAGS="$(CFLAGS)"; export CFLAGS; \ + CONFIG_SHELL="$(SHELL)"; export CONFIG_SHELL; \ + CXX="$(CXX)"; export CXX; \ + CXXFLAGS="$(CXXFLAGS)"; export CXXFLAGS; \ + AR="$(AR)"; export AR; \ + AS="$(AS)"; export AS; \ + CC_FOR_BUILD="$(CC_FOR_BUILD)"; export CC_FOR_BUILD; \ + DLLTOOL="$(DLLTOOL)"; export DLLTOOL; \ + LD="$(LD)"; export LD; \ + NM="$(NM)"; export NM; \ + RANLIB="$(RANLIB)"; export RANLIB; \ + WINDRES="$(WINDRES)"; export WINDRES; \ + OBJCOPY="$(OBJCOPY)"; export OBJCOPY; \ + OBJDUMP="$(OBJDUMP)"; export OBJDUMP; \ + echo Configuring in gas; \ + cd gas || exit 1; \ + case $(srcdir) in \ + \.) \ + srcdiroption="--srcdir=."; \ + libsrcdir=".";; \ + /* | [A-Za-z]:[\\/]*) \ + srcdiroption="--srcdir=$(srcdir)/gas"; \ + libsrcdir="$$s/gas";; \ + *) \ + srcdiroption="--srcdir=../$(srcdir)/gas"; \ + libsrcdir="$$s/gas";; \ + esac; \ + $(SHELL) $${libsrcdir}/configure \ + $(HOST_CONFIGARGS) $${srcdiroption} \ || exit 1 +.PHONY: all-gas maybe-all-gas +maybe-all-gas: +all-gas: configure-gas + @r=`${PWD_COMMAND}`; export r; \ + s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ + $(SET_LIB_PATH) \ + (cd gas && $(MAKE) $(FLAGS_TO_PASS) all) -.PHONY: maybe-TAGS-sid TAGS-sid -maybe-TAGS-sid: +.PHONY: check-gas maybe-check-gas +maybe-check-gas: -TAGS-sid: \ - configure-sid - @[ -f ./sid/Makefile ] || exit 0; \ - r=`${PWD_COMMAND}`; export r; \ +check-gas: + @r=`${PWD_COMMAND}`; export r; \ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ $(SET_LIB_PATH) \ - for flag in $(EXTRA_HOST_FLAGS); do \ - eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \ - done; \ - echo "Doing TAGS in sid" ; \ - (cd sid && \ - $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \ - "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \ - "RANLIB=$${RANLIB}" \ - "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" \ - TAGS) \ - || exit 1 + (cd gas && $(MAKE) $(FLAGS_TO_PASS) check) -.PHONY: maybe-TAGS-sim TAGS-sim -maybe-TAGS-sim: +.PHONY: install-gas maybe-install-gas +maybe-install-gas: -TAGS-sim: \ - configure-sim - @[ -f ./sim/Makefile ] || exit 0; \ - r=`${PWD_COMMAND}`; export r; \ +install-gas: installdirs + @r=`${PWD_COMMAND}`; export r; \ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ $(SET_LIB_PATH) \ - for flag in $(EXTRA_HOST_FLAGS); do \ - eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \ - done; \ - echo "Doing TAGS in sim" ; \ - (cd sim && \ - $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \ - "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \ - "RANLIB=$${RANLIB}" \ - "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" \ - TAGS) \ - || exit 1 + (cd gas && $(MAKE) $(FLAGS_TO_PASS) install) -.PHONY: maybe-TAGS-tar TAGS-tar -maybe-TAGS-tar: +# Other targets (info, dvi, etc.) -TAGS-tar: \ - configure-tar - @[ -f ./tar/Makefile ] || exit 0; \ +.PHONY: maybe-info-gas info-gas +maybe-info-gas: + +info-gas: \ + configure-gas + @[ -f ./gas/Makefile ] || exit 0; \ r=`${PWD_COMMAND}`; export r; \ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ $(SET_LIB_PATH) \ for flag in $(EXTRA_HOST_FLAGS); do \ eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \ done; \ - echo "Doing TAGS in tar" ; \ - (cd tar && \ + echo "Doing info in gas" ; \ + (cd gas && \ $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \ "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \ "RANLIB=$${RANLIB}" \ "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" \ - TAGS) \ + info) \ || exit 1 -.PHONY: maybe-TAGS-texinfo TAGS-texinfo -maybe-TAGS-texinfo: +.PHONY: maybe-dvi-gas dvi-gas +maybe-dvi-gas: -TAGS-texinfo: \ - configure-texinfo - @[ -f ./texinfo/Makefile ] || exit 0; \ +dvi-gas: \ + configure-gas + @[ -f ./gas/Makefile ] || exit 0; \ r=`${PWD_COMMAND}`; export r; \ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ $(SET_LIB_PATH) \ for flag in $(EXTRA_HOST_FLAGS); do \ eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \ done; \ - echo "Doing TAGS in texinfo" ; \ - (cd texinfo && \ + echo "Doing dvi in gas" ; \ + (cd gas && \ $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \ "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \ "RANLIB=$${RANLIB}" \ "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" \ - TAGS) \ + dvi) \ || exit 1 -.PHONY: maybe-TAGS-textutils TAGS-textutils -maybe-TAGS-textutils: +.PHONY: maybe-TAGS-gas TAGS-gas +maybe-TAGS-gas: -TAGS-textutils: \ - configure-textutils - @[ -f ./textutils/Makefile ] || exit 0; \ +TAGS-gas: \ + configure-gas + @[ -f ./gas/Makefile ] || exit 0; \ r=`${PWD_COMMAND}`; export r; \ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ $(SET_LIB_PATH) \ for flag in $(EXTRA_HOST_FLAGS); do \ eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \ done; \ - echo "Doing TAGS in textutils" ; \ - (cd textutils && \ + echo "Doing TAGS in gas" ; \ + (cd gas && \ $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \ "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \ "RANLIB=$${RANLIB}" \ @@ -5763,218 +7148,263 @@ TAGS-textutils: \ || exit 1 -.PHONY: maybe-TAGS-time TAGS-time -maybe-TAGS-time: +.PHONY: maybe-install-info-gas install-info-gas +maybe-install-info-gas: -TAGS-time: \ - configure-time - @[ -f ./time/Makefile ] || exit 0; \ +install-info-gas: \ + configure-gas \ + info-gas + @[ -f ./gas/Makefile ] || exit 0; \ r=`${PWD_COMMAND}`; export r; \ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ $(SET_LIB_PATH) \ for flag in $(EXTRA_HOST_FLAGS); do \ eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \ done; \ - echo "Doing TAGS in time" ; \ - (cd time && \ + echo "Doing install-info in gas" ; \ + (cd gas && \ $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \ "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \ "RANLIB=$${RANLIB}" \ "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" \ - TAGS) \ + install-info) \ || exit 1 -.PHONY: maybe-TAGS-uudecode TAGS-uudecode -maybe-TAGS-uudecode: +.PHONY: maybe-installcheck-gas installcheck-gas +maybe-installcheck-gas: -TAGS-uudecode: \ - configure-uudecode - @[ -f ./uudecode/Makefile ] || exit 0; \ +installcheck-gas: \ + configure-gas + @[ -f ./gas/Makefile ] || exit 0; \ r=`${PWD_COMMAND}`; export r; \ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ $(SET_LIB_PATH) \ for flag in $(EXTRA_HOST_FLAGS); do \ eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \ done; \ - echo "Doing TAGS in uudecode" ; \ - (cd uudecode && \ + echo "Doing installcheck in gas" ; \ + (cd gas && \ $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \ "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \ "RANLIB=$${RANLIB}" \ "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" \ - TAGS) \ + installcheck) \ || exit 1 -.PHONY: maybe-TAGS-wdiff TAGS-wdiff -maybe-TAGS-wdiff: +.PHONY: maybe-mostlyclean-gas mostlyclean-gas +maybe-mostlyclean-gas: -TAGS-wdiff: \ - configure-wdiff - @[ -f ./wdiff/Makefile ] || exit 0; \ +mostlyclean-gas: + @[ -f ./gas/Makefile ] || exit 0; \ r=`${PWD_COMMAND}`; export r; \ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ $(SET_LIB_PATH) \ for flag in $(EXTRA_HOST_FLAGS); do \ eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \ done; \ - echo "Doing TAGS in wdiff" ; \ - (cd wdiff && \ + echo "Doing mostlyclean in gas" ; \ + (cd gas && \ $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \ "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \ "RANLIB=$${RANLIB}" \ "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" \ - TAGS) \ + mostlyclean) \ || exit 1 -.PHONY: maybe-TAGS-zip TAGS-zip -maybe-TAGS-zip: +.PHONY: maybe-clean-gas clean-gas +maybe-clean-gas: -TAGS-zip: \ - configure-zip - @[ -f ./zip/Makefile ] || exit 0; \ +clean-gas: + @[ -f ./gas/Makefile ] || exit 0; \ r=`${PWD_COMMAND}`; export r; \ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ $(SET_LIB_PATH) \ for flag in $(EXTRA_HOST_FLAGS); do \ eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \ done; \ - echo "Doing TAGS in zip" ; \ - (cd zip && \ + echo "Doing clean in gas" ; \ + (cd gas && \ $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \ "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \ "RANLIB=$${RANLIB}" \ "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" \ - TAGS) \ + clean) \ || exit 1 -.PHONY: maybe-TAGS-zlib TAGS-zlib -maybe-TAGS-zlib: +.PHONY: maybe-distclean-gas distclean-gas +maybe-distclean-gas: -TAGS-zlib: \ - configure-zlib - @[ -f ./zlib/Makefile ] || exit 0; \ +distclean-gas: + @[ -f ./gas/Makefile ] || exit 0; \ r=`${PWD_COMMAND}`; export r; \ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ $(SET_LIB_PATH) \ for flag in $(EXTRA_HOST_FLAGS); do \ eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \ done; \ - echo "Doing TAGS in zlib" ; \ - (cd zlib && \ + echo "Doing distclean in gas" ; \ + (cd gas && \ $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \ "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \ "RANLIB=$${RANLIB}" \ "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" \ - TAGS) \ + distclean) \ || exit 1 -.PHONY: maybe-TAGS-gdb TAGS-gdb -maybe-TAGS-gdb: +.PHONY: maybe-maintainer-clean-gas maintainer-clean-gas +maybe-maintainer-clean-gas: -TAGS-gdb: \ - configure-gdb - @[ -f ./gdb/Makefile ] || exit 0; \ +maintainer-clean-gas: + @[ -f ./gas/Makefile ] || exit 0; \ r=`${PWD_COMMAND}`; export r; \ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ $(SET_LIB_PATH) \ for flag in $(EXTRA_HOST_FLAGS); do \ eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \ done; \ - echo "Doing TAGS in gdb" ; \ - (cd gdb && \ + echo "Doing maintainer-clean in gas" ; \ + (cd gas && \ $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \ "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \ "RANLIB=$${RANLIB}" \ "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" \ - TAGS) \ + maintainer-clean) \ || exit 1 -.PHONY: maybe-TAGS-expect TAGS-expect -maybe-TAGS-expect: -TAGS-expect: \ - configure-expect - @[ -f ./expect/Makefile ] || exit 0; \ +.PHONY: configure-gawk maybe-configure-gawk +maybe-configure-gawk: +configure-gawk: + @test ! -f gawk/Makefile || exit 0; \ + [ -d gawk ] || mkdir gawk; \ r=`${PWD_COMMAND}`; export r; \ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ - $(SET_LIB_PATH) \ - for flag in $(EXTRA_HOST_FLAGS); do \ - eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \ - done; \ - echo "Doing TAGS in expect" ; \ - (cd expect && \ - $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \ - "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \ - "RANLIB=$${RANLIB}" \ - "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" \ - TAGS) \ + CC="$(CC)"; export CC; \ + CFLAGS="$(CFLAGS)"; export CFLAGS; \ + CONFIG_SHELL="$(SHELL)"; export CONFIG_SHELL; \ + CXX="$(CXX)"; export CXX; \ + CXXFLAGS="$(CXXFLAGS)"; export CXXFLAGS; \ + AR="$(AR)"; export AR; \ + AS="$(AS)"; export AS; \ + CC_FOR_BUILD="$(CC_FOR_BUILD)"; export CC_FOR_BUILD; \ + DLLTOOL="$(DLLTOOL)"; export DLLTOOL; \ + LD="$(LD)"; export LD; \ + NM="$(NM)"; export NM; \ + RANLIB="$(RANLIB)"; export RANLIB; \ + WINDRES="$(WINDRES)"; export WINDRES; \ + OBJCOPY="$(OBJCOPY)"; export OBJCOPY; \ + OBJDUMP="$(OBJDUMP)"; export OBJDUMP; \ + echo Configuring in gawk; \ + cd gawk || exit 1; \ + case $(srcdir) in \ + \.) \ + srcdiroption="--srcdir=."; \ + libsrcdir=".";; \ + /* | [A-Za-z]:[\\/]*) \ + srcdiroption="--srcdir=$(srcdir)/gawk"; \ + libsrcdir="$$s/gawk";; \ + *) \ + srcdiroption="--srcdir=../$(srcdir)/gawk"; \ + libsrcdir="$$s/gawk";; \ + esac; \ + $(SHELL) $${libsrcdir}/configure \ + $(HOST_CONFIGARGS) $${srcdiroption} \ || exit 1 +.PHONY: all-gawk maybe-all-gawk +maybe-all-gawk: +all-gawk: configure-gawk + @r=`${PWD_COMMAND}`; export r; \ + s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ + $(SET_LIB_PATH) \ + (cd gawk && $(MAKE) $(FLAGS_TO_PASS) all) -.PHONY: maybe-TAGS-guile TAGS-guile -maybe-TAGS-guile: +.PHONY: check-gawk maybe-check-gawk +maybe-check-gawk: -TAGS-guile: \ - configure-guile - @[ -f ./guile/Makefile ] || exit 0; \ +check-gawk: + @r=`${PWD_COMMAND}`; export r; \ + s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ + $(SET_LIB_PATH) \ + (cd gawk && $(MAKE) $(FLAGS_TO_PASS) check) + + +.PHONY: install-gawk maybe-install-gawk +maybe-install-gawk: + +install-gawk: installdirs + @r=`${PWD_COMMAND}`; export r; \ + s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ + $(SET_LIB_PATH) \ + (cd gawk && $(MAKE) $(FLAGS_TO_PASS) install) + + +# Other targets (info, dvi, etc.) + +.PHONY: maybe-info-gawk info-gawk +maybe-info-gawk: + +info-gawk: \ + configure-gawk + @[ -f ./gawk/Makefile ] || exit 0; \ r=`${PWD_COMMAND}`; export r; \ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ $(SET_LIB_PATH) \ for flag in $(EXTRA_HOST_FLAGS); do \ eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \ done; \ - echo "Doing TAGS in guile" ; \ - (cd guile && \ + echo "Doing info in gawk" ; \ + (cd gawk && \ $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \ "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \ "RANLIB=$${RANLIB}" \ "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" \ - TAGS) \ + info) \ || exit 1 -.PHONY: maybe-TAGS-tk TAGS-tk -maybe-TAGS-tk: +.PHONY: maybe-dvi-gawk dvi-gawk +maybe-dvi-gawk: -TAGS-tk: \ - configure-tk - @[ -f ./tk/Makefile ] || exit 0; \ +dvi-gawk: \ + configure-gawk + @[ -f ./gawk/Makefile ] || exit 0; \ r=`${PWD_COMMAND}`; export r; \ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ $(SET_LIB_PATH) \ for flag in $(EXTRA_HOST_FLAGS); do \ eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \ done; \ - echo "Doing TAGS in tk" ; \ - (cd tk && \ + echo "Doing dvi in gawk" ; \ + (cd gawk && \ $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \ "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \ "RANLIB=$${RANLIB}" \ "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" \ - TAGS) \ + dvi) \ || exit 1 -.PHONY: maybe-TAGS-tix TAGS-tix -maybe-TAGS-tix: +.PHONY: maybe-TAGS-gawk TAGS-gawk +maybe-TAGS-gawk: -TAGS-tix: \ - configure-tix - @[ -f ./tix/Makefile ] || exit 0; \ +TAGS-gawk: \ + configure-gawk + @[ -f ./gawk/Makefile ] || exit 0; \ r=`${PWD_COMMAND}`; export r; \ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ $(SET_LIB_PATH) \ for flag in $(EXTRA_HOST_FLAGS); do \ eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \ done; \ - echo "Doing TAGS in tix" ; \ - (cd tix && \ + echo "Doing TAGS in gawk" ; \ + (cd gawk && \ $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \ "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \ "RANLIB=$${RANLIB}" \ @@ -5983,265 +7413,263 @@ TAGS-tix: \ || exit 1 -.PHONY: maybe-TAGS-libtermcap TAGS-libtermcap -maybe-TAGS-libtermcap: +.PHONY: maybe-install-info-gawk install-info-gawk +maybe-install-info-gawk: -TAGS-libtermcap: \ - configure-libtermcap - @[ -f ./libtermcap/Makefile ] || exit 0; \ +install-info-gawk: \ + configure-gawk \ + info-gawk + @[ -f ./gawk/Makefile ] || exit 0; \ r=`${PWD_COMMAND}`; export r; \ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ $(SET_LIB_PATH) \ for flag in $(EXTRA_HOST_FLAGS); do \ eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \ done; \ - echo "Doing TAGS in libtermcap" ; \ - (cd libtermcap && \ + echo "Doing install-info in gawk" ; \ + (cd gawk && \ $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \ "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \ "RANLIB=$${RANLIB}" \ "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" \ - TAGS) \ + install-info) \ || exit 1 -.PHONY: maybe-TAGS-utils TAGS-utils -maybe-TAGS-utils: +.PHONY: maybe-installcheck-gawk installcheck-gawk +maybe-installcheck-gawk: -TAGS-utils: \ - configure-utils - @[ -f ./utils/Makefile ] || exit 0; \ +installcheck-gawk: \ + configure-gawk + @[ -f ./gawk/Makefile ] || exit 0; \ r=`${PWD_COMMAND}`; export r; \ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ $(SET_LIB_PATH) \ for flag in $(EXTRA_HOST_FLAGS); do \ eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \ done; \ - echo "Doing TAGS in utils" ; \ - (cd utils && \ + echo "Doing installcheck in gawk" ; \ + (cd gawk && \ $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \ "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \ "RANLIB=$${RANLIB}" \ "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" \ - TAGS) \ + installcheck) \ || exit 1 +.PHONY: maybe-mostlyclean-gawk mostlyclean-gawk +maybe-mostlyclean-gawk: -# Target modules. - -.PHONY: maybe-TAGS-target-libstdc++-v3 TAGS-target-libstdc++-v3 -maybe-TAGS-target-libstdc++-v3: - -TAGS-target-libstdc++-v3: \ - configure-target-libstdc++-v3 - @[ -f $(TARGET_SUBDIR)/libstdc++-v3/Makefile ] || exit 0 ; \ +mostlyclean-gawk: + @[ -f ./gawk/Makefile ] || exit 0; \ r=`${PWD_COMMAND}`; export r; \ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ $(SET_LIB_PATH) \ - echo "Doing TAGS in $(TARGET_SUBDIR)/libstdc++-v3" ; \ - for flag in $(EXTRA_TARGET_FLAGS); do \ + for flag in $(EXTRA_HOST_FLAGS); do \ eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \ done; \ - (cd $(TARGET_SUBDIR)/libstdc++-v3 && \ + echo "Doing mostlyclean in gawk" ; \ + (cd gawk && \ $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \ "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \ "RANLIB=$${RANLIB}" \ "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" \ - TAGS) \ + mostlyclean) \ || exit 1 -.PHONY: maybe-TAGS-target-newlib TAGS-target-newlib -maybe-TAGS-target-newlib: +.PHONY: maybe-clean-gawk clean-gawk +maybe-clean-gawk: -TAGS-target-newlib: \ - configure-target-newlib - @[ -f $(TARGET_SUBDIR)/newlib/Makefile ] || exit 0 ; \ +clean-gawk: + @[ -f ./gawk/Makefile ] || exit 0; \ r=`${PWD_COMMAND}`; export r; \ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ $(SET_LIB_PATH) \ - echo "Doing TAGS in $(TARGET_SUBDIR)/newlib" ; \ - for flag in $(EXTRA_TARGET_FLAGS); do \ + for flag in $(EXTRA_HOST_FLAGS); do \ eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \ done; \ - (cd $(TARGET_SUBDIR)/newlib && \ + echo "Doing clean in gawk" ; \ + (cd gawk && \ $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \ "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \ "RANLIB=$${RANLIB}" \ "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" \ - TAGS) \ + clean) \ || exit 1 -.PHONY: maybe-TAGS-target-libf2c TAGS-target-libf2c -maybe-TAGS-target-libf2c: +.PHONY: maybe-distclean-gawk distclean-gawk +maybe-distclean-gawk: -TAGS-target-libf2c: \ - configure-target-libf2c - @[ -f $(TARGET_SUBDIR)/libf2c/Makefile ] || exit 0 ; \ +distclean-gawk: + @[ -f ./gawk/Makefile ] || exit 0; \ r=`${PWD_COMMAND}`; export r; \ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ $(SET_LIB_PATH) \ - echo "Doing TAGS in $(TARGET_SUBDIR)/libf2c" ; \ - for flag in $(EXTRA_TARGET_FLAGS); do \ + for flag in $(EXTRA_HOST_FLAGS); do \ eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \ done; \ - (cd $(TARGET_SUBDIR)/libf2c && \ + echo "Doing distclean in gawk" ; \ + (cd gawk && \ $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \ "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \ "RANLIB=$${RANLIB}" \ "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" \ - TAGS) \ + distclean) \ || exit 1 -.PHONY: maybe-TAGS-target-libobjc TAGS-target-libobjc -maybe-TAGS-target-libobjc: +.PHONY: maybe-maintainer-clean-gawk maintainer-clean-gawk +maybe-maintainer-clean-gawk: -TAGS-target-libobjc: \ - configure-target-libobjc - @[ -f $(TARGET_SUBDIR)/libobjc/Makefile ] || exit 0 ; \ +maintainer-clean-gawk: + @[ -f ./gawk/Makefile ] || exit 0; \ r=`${PWD_COMMAND}`; export r; \ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ $(SET_LIB_PATH) \ - echo "Doing TAGS in $(TARGET_SUBDIR)/libobjc" ; \ - for flag in $(EXTRA_TARGET_FLAGS); do \ + for flag in $(EXTRA_HOST_FLAGS); do \ eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \ done; \ - (cd $(TARGET_SUBDIR)/libobjc && \ + echo "Doing maintainer-clean in gawk" ; \ + (cd gawk && \ $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \ "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \ "RANLIB=$${RANLIB}" \ "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" \ - TAGS) \ + maintainer-clean) \ || exit 1 -.PHONY: maybe-TAGS-target-libtermcap TAGS-target-libtermcap -maybe-TAGS-target-libtermcap: -TAGS-target-libtermcap: \ - configure-target-libtermcap - @[ -f $(TARGET_SUBDIR)/libtermcap/Makefile ] || exit 0 ; \ +.PHONY: configure-gettext maybe-configure-gettext +maybe-configure-gettext: +configure-gettext: + @test ! -f gettext/Makefile || exit 0; \ + [ -d gettext ] || mkdir gettext; \ r=`${PWD_COMMAND}`; export r; \ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ - $(SET_LIB_PATH) \ - echo "Doing TAGS in $(TARGET_SUBDIR)/libtermcap" ; \ - for flag in $(EXTRA_TARGET_FLAGS); do \ - eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \ - done; \ - (cd $(TARGET_SUBDIR)/libtermcap && \ - $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \ - "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \ - "RANLIB=$${RANLIB}" \ - "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" \ - TAGS) \ + CC="$(CC)"; export CC; \ + CFLAGS="$(CFLAGS)"; export CFLAGS; \ + CONFIG_SHELL="$(SHELL)"; export CONFIG_SHELL; \ + CXX="$(CXX)"; export CXX; \ + CXXFLAGS="$(CXXFLAGS)"; export CXXFLAGS; \ + AR="$(AR)"; export AR; \ + AS="$(AS)"; export AS; \ + CC_FOR_BUILD="$(CC_FOR_BUILD)"; export CC_FOR_BUILD; \ + DLLTOOL="$(DLLTOOL)"; export DLLTOOL; \ + LD="$(LD)"; export LD; \ + NM="$(NM)"; export NM; \ + RANLIB="$(RANLIB)"; export RANLIB; \ + WINDRES="$(WINDRES)"; export WINDRES; \ + OBJCOPY="$(OBJCOPY)"; export OBJCOPY; \ + OBJDUMP="$(OBJDUMP)"; export OBJDUMP; \ + echo Configuring in gettext; \ + cd gettext || exit 1; \ + case $(srcdir) in \ + \.) \ + srcdiroption="--srcdir=."; \ + libsrcdir=".";; \ + /* | [A-Za-z]:[\\/]*) \ + srcdiroption="--srcdir=$(srcdir)/gettext"; \ + libsrcdir="$$s/gettext";; \ + *) \ + srcdiroption="--srcdir=../$(srcdir)/gettext"; \ + libsrcdir="$$s/gettext";; \ + esac; \ + $(SHELL) $${libsrcdir}/configure \ + $(HOST_CONFIGARGS) $${srcdiroption} \ || exit 1 +.PHONY: all-gettext maybe-all-gettext +maybe-all-gettext: +all-gettext: configure-gettext + @r=`${PWD_COMMAND}`; export r; \ + s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ + $(SET_LIB_PATH) \ + (cd gettext && $(MAKE) $(FLAGS_TO_PASS) all) -.PHONY: maybe-TAGS-target-winsup TAGS-target-winsup -maybe-TAGS-target-winsup: +.PHONY: check-gettext maybe-check-gettext +maybe-check-gettext: -TAGS-target-winsup: \ - configure-target-winsup - @[ -f $(TARGET_SUBDIR)/winsup/Makefile ] || exit 0 ; \ - r=`${PWD_COMMAND}`; export r; \ +check-gettext: + @r=`${PWD_COMMAND}`; export r; \ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ $(SET_LIB_PATH) \ - echo "Doing TAGS in $(TARGET_SUBDIR)/winsup" ; \ - for flag in $(EXTRA_TARGET_FLAGS); do \ - eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \ - done; \ - (cd $(TARGET_SUBDIR)/winsup && \ - $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \ - "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \ - "RANLIB=$${RANLIB}" \ - "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" \ - TAGS) \ - || exit 1 + (cd gettext && $(MAKE) $(FLAGS_TO_PASS) check) -.PHONY: maybe-TAGS-target-libgloss TAGS-target-libgloss -maybe-TAGS-target-libgloss: +.PHONY: install-gettext maybe-install-gettext +maybe-install-gettext: -TAGS-target-libgloss: \ - configure-target-libgloss - @[ -f $(TARGET_SUBDIR)/libgloss/Makefile ] || exit 0 ; \ - r=`${PWD_COMMAND}`; export r; \ +install-gettext: installdirs + @r=`${PWD_COMMAND}`; export r; \ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ $(SET_LIB_PATH) \ - echo "Doing TAGS in $(TARGET_SUBDIR)/libgloss" ; \ - for flag in $(EXTRA_TARGET_FLAGS); do \ - eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \ - done; \ - (cd $(TARGET_SUBDIR)/libgloss && \ - $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \ - "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \ - "RANLIB=$${RANLIB}" \ - "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" \ - TAGS) \ - || exit 1 + (cd gettext && $(MAKE) $(FLAGS_TO_PASS) install) -.PHONY: maybe-TAGS-target-libiberty TAGS-target-libiberty -maybe-TAGS-target-libiberty: +# Other targets (info, dvi, etc.) -TAGS-target-libiberty: \ - configure-target-libiberty - @[ -f $(TARGET_SUBDIR)/libiberty/Makefile ] || exit 0 ; \ +.PHONY: maybe-info-gettext info-gettext +maybe-info-gettext: + +info-gettext: \ + configure-gettext + @[ -f ./gettext/Makefile ] || exit 0; \ r=`${PWD_COMMAND}`; export r; \ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ $(SET_LIB_PATH) \ - echo "Doing TAGS in $(TARGET_SUBDIR)/libiberty" ; \ - for flag in $(EXTRA_TARGET_FLAGS); do \ + for flag in $(EXTRA_HOST_FLAGS); do \ eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \ done; \ - (cd $(TARGET_SUBDIR)/libiberty && \ + echo "Doing info in gettext" ; \ + (cd gettext && \ $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \ "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \ "RANLIB=$${RANLIB}" \ "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" \ - TAGS) \ + info) \ || exit 1 -.PHONY: maybe-TAGS-target-gperf TAGS-target-gperf -maybe-TAGS-target-gperf: +.PHONY: maybe-dvi-gettext dvi-gettext +maybe-dvi-gettext: -TAGS-target-gperf: \ - configure-target-gperf - @[ -f $(TARGET_SUBDIR)/gperf/Makefile ] || exit 0 ; \ +dvi-gettext: \ + configure-gettext + @[ -f ./gettext/Makefile ] || exit 0; \ r=`${PWD_COMMAND}`; export r; \ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ $(SET_LIB_PATH) \ - echo "Doing TAGS in $(TARGET_SUBDIR)/gperf" ; \ - for flag in $(EXTRA_TARGET_FLAGS); do \ + for flag in $(EXTRA_HOST_FLAGS); do \ eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \ done; \ - (cd $(TARGET_SUBDIR)/gperf && \ + echo "Doing dvi in gettext" ; \ + (cd gettext && \ $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \ "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \ "RANLIB=$${RANLIB}" \ "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" \ - TAGS) \ + dvi) \ || exit 1 -.PHONY: maybe-TAGS-target-examples TAGS-target-examples -maybe-TAGS-target-examples: +.PHONY: maybe-TAGS-gettext TAGS-gettext +maybe-TAGS-gettext: -TAGS-target-examples: \ - configure-target-examples - @[ -f $(TARGET_SUBDIR)/examples/Makefile ] || exit 0 ; \ +TAGS-gettext: \ + configure-gettext + @[ -f ./gettext/Makefile ] || exit 0; \ r=`${PWD_COMMAND}`; export r; \ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ $(SET_LIB_PATH) \ - echo "Doing TAGS in $(TARGET_SUBDIR)/examples" ; \ - for flag in $(EXTRA_TARGET_FLAGS); do \ + for flag in $(EXTRA_HOST_FLAGS); do \ eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \ done; \ - (cd $(TARGET_SUBDIR)/examples && \ + echo "Doing TAGS in gettext" ; \ + (cd gettext && \ $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \ "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \ "RANLIB=$${RANLIB}" \ @@ -6250,359 +7678,286 @@ TAGS-target-examples: \ || exit 1 -.PHONY: maybe-TAGS-target-libffi TAGS-target-libffi -maybe-TAGS-target-libffi: +.PHONY: maybe-install-info-gettext install-info-gettext +maybe-install-info-gettext: -TAGS-target-libffi: \ - configure-target-libffi - @[ -f $(TARGET_SUBDIR)/libffi/Makefile ] || exit 0 ; \ +install-info-gettext: \ + configure-gettext \ + info-gettext + @[ -f ./gettext/Makefile ] || exit 0; \ r=`${PWD_COMMAND}`; export r; \ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ $(SET_LIB_PATH) \ - echo "Doing TAGS in $(TARGET_SUBDIR)/libffi" ; \ - for flag in $(EXTRA_TARGET_FLAGS); do \ + for flag in $(EXTRA_HOST_FLAGS); do \ eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \ done; \ - (cd $(TARGET_SUBDIR)/libffi && \ + echo "Doing install-info in gettext" ; \ + (cd gettext && \ $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \ "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \ "RANLIB=$${RANLIB}" \ "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" \ - TAGS) \ + install-info) \ || exit 1 -.PHONY: maybe-TAGS-target-libjava TAGS-target-libjava -maybe-TAGS-target-libjava: +.PHONY: maybe-installcheck-gettext installcheck-gettext +maybe-installcheck-gettext: -TAGS-target-libjava: \ - configure-target-libjava - @[ -f $(TARGET_SUBDIR)/libjava/Makefile ] || exit 0 ; \ +installcheck-gettext: \ + configure-gettext + @[ -f ./gettext/Makefile ] || exit 0; \ r=`${PWD_COMMAND}`; export r; \ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ $(SET_LIB_PATH) \ - echo "Doing TAGS in $(TARGET_SUBDIR)/libjava" ; \ - for flag in $(EXTRA_TARGET_FLAGS); do \ + for flag in $(EXTRA_HOST_FLAGS); do \ eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \ done; \ - (cd $(TARGET_SUBDIR)/libjava && \ + echo "Doing installcheck in gettext" ; \ + (cd gettext && \ $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \ "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \ "RANLIB=$${RANLIB}" \ "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" \ - TAGS) \ + installcheck) \ || exit 1 -.PHONY: maybe-TAGS-target-zlib TAGS-target-zlib -maybe-TAGS-target-zlib: +.PHONY: maybe-mostlyclean-gettext mostlyclean-gettext +maybe-mostlyclean-gettext: -TAGS-target-zlib: \ - configure-target-zlib - @[ -f $(TARGET_SUBDIR)/zlib/Makefile ] || exit 0 ; \ +mostlyclean-gettext: + @[ -f ./gettext/Makefile ] || exit 0; \ r=`${PWD_COMMAND}`; export r; \ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ $(SET_LIB_PATH) \ - echo "Doing TAGS in $(TARGET_SUBDIR)/zlib" ; \ - for flag in $(EXTRA_TARGET_FLAGS); do \ + for flag in $(EXTRA_HOST_FLAGS); do \ eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \ done; \ - (cd $(TARGET_SUBDIR)/zlib && \ + echo "Doing mostlyclean in gettext" ; \ + (cd gettext && \ $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \ "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \ "RANLIB=$${RANLIB}" \ "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" \ - TAGS) \ + mostlyclean) \ || exit 1 -.PHONY: maybe-TAGS-target-boehm-gc TAGS-target-boehm-gc -maybe-TAGS-target-boehm-gc: +.PHONY: maybe-clean-gettext clean-gettext +maybe-clean-gettext: -TAGS-target-boehm-gc: \ - configure-target-boehm-gc - @[ -f $(TARGET_SUBDIR)/boehm-gc/Makefile ] || exit 0 ; \ +clean-gettext: + @[ -f ./gettext/Makefile ] || exit 0; \ r=`${PWD_COMMAND}`; export r; \ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ $(SET_LIB_PATH) \ - echo "Doing TAGS in $(TARGET_SUBDIR)/boehm-gc" ; \ - for flag in $(EXTRA_TARGET_FLAGS); do \ + for flag in $(EXTRA_HOST_FLAGS); do \ eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \ done; \ - (cd $(TARGET_SUBDIR)/boehm-gc && \ + echo "Doing clean in gettext" ; \ + (cd gettext && \ $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \ "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \ "RANLIB=$${RANLIB}" \ "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" \ - TAGS) \ + clean) \ || exit 1 -.PHONY: maybe-TAGS-target-qthreads TAGS-target-qthreads -maybe-TAGS-target-qthreads: +.PHONY: maybe-distclean-gettext distclean-gettext +maybe-distclean-gettext: -TAGS-target-qthreads: \ - configure-target-qthreads - @[ -f $(TARGET_SUBDIR)/qthreads/Makefile ] || exit 0 ; \ +distclean-gettext: + @[ -f ./gettext/Makefile ] || exit 0; \ r=`${PWD_COMMAND}`; export r; \ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ $(SET_LIB_PATH) \ - echo "Doing TAGS in $(TARGET_SUBDIR)/qthreads" ; \ - for flag in $(EXTRA_TARGET_FLAGS); do \ + for flag in $(EXTRA_HOST_FLAGS); do \ eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \ done; \ - (cd $(TARGET_SUBDIR)/qthreads && \ + echo "Doing distclean in gettext" ; \ + (cd gettext && \ $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \ "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \ "RANLIB=$${RANLIB}" \ "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" \ - TAGS) \ + distclean) \ || exit 1 -.PHONY: maybe-TAGS-target-rda TAGS-target-rda -maybe-TAGS-target-rda: +.PHONY: maybe-maintainer-clean-gettext maintainer-clean-gettext +maybe-maintainer-clean-gettext: -TAGS-target-rda: \ - configure-target-rda - @[ -f $(TARGET_SUBDIR)/rda/Makefile ] || exit 0 ; \ +maintainer-clean-gettext: + @[ -f ./gettext/Makefile ] || exit 0; \ r=`${PWD_COMMAND}`; export r; \ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ $(SET_LIB_PATH) \ - echo "Doing TAGS in $(TARGET_SUBDIR)/rda" ; \ - for flag in $(EXTRA_TARGET_FLAGS); do \ + for flag in $(EXTRA_HOST_FLAGS); do \ eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \ done; \ - (cd $(TARGET_SUBDIR)/rda && \ + echo "Doing maintainer-clean in gettext" ; \ + (cd gettext && \ $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \ "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \ "RANLIB=$${RANLIB}" \ "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" \ - TAGS) \ + maintainer-clean) \ || exit 1 -.PHONY: maybe-TAGS-target-libada TAGS-target-libada -maybe-TAGS-target-libada: -TAGS-target-libada: \ - configure-target-libada - @[ -f $(TARGET_SUBDIR)/libada/Makefile ] || exit 0 ; \ +.PHONY: configure-gnuserv maybe-configure-gnuserv +maybe-configure-gnuserv: +configure-gnuserv: + @test ! -f gnuserv/Makefile || exit 0; \ + [ -d gnuserv ] || mkdir gnuserv; \ r=`${PWD_COMMAND}`; export r; \ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ - $(SET_LIB_PATH) \ - echo "Doing TAGS in $(TARGET_SUBDIR)/libada" ; \ - for flag in $(EXTRA_TARGET_FLAGS); do \ - eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \ - done; \ - (cd $(TARGET_SUBDIR)/libada && \ - $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \ - "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \ - "RANLIB=$${RANLIB}" \ - "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" \ - TAGS) \ + CC="$(CC)"; export CC; \ + CFLAGS="$(CFLAGS)"; export CFLAGS; \ + CONFIG_SHELL="$(SHELL)"; export CONFIG_SHELL; \ + CXX="$(CXX)"; export CXX; \ + CXXFLAGS="$(CXXFLAGS)"; export CXXFLAGS; \ + AR="$(AR)"; export AR; \ + AS="$(AS)"; export AS; \ + CC_FOR_BUILD="$(CC_FOR_BUILD)"; export CC_FOR_BUILD; \ + DLLTOOL="$(DLLTOOL)"; export DLLTOOL; \ + LD="$(LD)"; export LD; \ + NM="$(NM)"; export NM; \ + RANLIB="$(RANLIB)"; export RANLIB; \ + WINDRES="$(WINDRES)"; export WINDRES; \ + OBJCOPY="$(OBJCOPY)"; export OBJCOPY; \ + OBJDUMP="$(OBJDUMP)"; export OBJDUMP; \ + echo Configuring in gnuserv; \ + cd gnuserv || exit 1; \ + case $(srcdir) in \ + \.) \ + srcdiroption="--srcdir=."; \ + libsrcdir=".";; \ + /* | [A-Za-z]:[\\/]*) \ + srcdiroption="--srcdir=$(srcdir)/gnuserv"; \ + libsrcdir="$$s/gnuserv";; \ + *) \ + srcdiroption="--srcdir=../$(srcdir)/gnuserv"; \ + libsrcdir="$$s/gnuserv";; \ + esac; \ + $(SHELL) $${libsrcdir}/configure \ + $(HOST_CONFIGARGS) $${srcdiroption} \ || exit 1 +.PHONY: all-gnuserv maybe-all-gnuserv +maybe-all-gnuserv: +all-gnuserv: configure-gnuserv + @r=`${PWD_COMMAND}`; export r; \ + s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ + $(SET_LIB_PATH) \ + (cd gnuserv && $(MAKE) $(FLAGS_TO_PASS) all) +.PHONY: check-gnuserv maybe-check-gnuserv +maybe-check-gnuserv: -.PHONY: do-install-info -do-install-info: install-info-host install-info-target +check-gnuserv: + @r=`${PWD_COMMAND}`; export r; \ + s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ + $(SET_LIB_PATH) \ + (cd gnuserv && $(MAKE) $(FLAGS_TO_PASS) check) -.PHONY: install-info-host -install-info-host: maybe-install-info-gcc \ - maybe-install-info-ash \ - maybe-install-info-autoconf \ - maybe-install-info-automake \ - maybe-install-info-bash \ - maybe-install-info-bfd \ - maybe-install-info-opcodes \ - maybe-install-info-binutils \ - maybe-install-info-bison \ - maybe-install-info-byacc \ - maybe-install-info-bzip2 \ - maybe-install-info-dejagnu \ - maybe-install-info-diff \ - maybe-install-info-dosutils \ - maybe-install-info-etc \ - maybe-install-info-fastjar \ - maybe-install-info-fileutils \ - maybe-install-info-findutils \ - maybe-install-info-find \ - maybe-install-info-flex \ - maybe-install-info-gas \ - maybe-install-info-gawk \ - maybe-install-info-gettext \ - maybe-install-info-gnuserv \ - maybe-install-info-gprof \ - maybe-install-info-gzip \ - maybe-install-info-hello \ - maybe-install-info-indent \ - maybe-install-info-intl \ - maybe-install-info-tcl \ - maybe-install-info-itcl \ - maybe-install-info-ld \ - maybe-install-info-libgui \ - maybe-install-info-libiberty \ - maybe-install-info-libtool \ - maybe-install-info-m4 \ - maybe-install-info-make \ - maybe-install-info-mmalloc \ - maybe-install-info-patch \ - maybe-install-info-perl \ - maybe-install-info-prms \ - maybe-install-info-rcs \ - maybe-install-info-readline \ - maybe-install-info-release \ - maybe-install-info-recode \ - maybe-install-info-sed \ - maybe-install-info-send-pr \ - maybe-install-info-shellutils \ - maybe-install-info-sid \ - maybe-install-info-sim \ - maybe-install-info-tar \ - maybe-install-info-texinfo \ - maybe-install-info-textutils \ - maybe-install-info-time \ - maybe-install-info-uudecode \ - maybe-install-info-wdiff \ - maybe-install-info-zip \ - maybe-install-info-zlib \ - maybe-install-info-gdb \ - maybe-install-info-expect \ - maybe-install-info-guile \ - maybe-install-info-tk \ - maybe-install-info-tix \ - maybe-install-info-libtermcap \ - maybe-install-info-utils -.PHONY: install-info-target -install-info-target: \ - maybe-install-info-target-libstdc++-v3 \ - maybe-install-info-target-newlib \ - maybe-install-info-target-libf2c \ - maybe-install-info-target-libobjc \ - maybe-install-info-target-libtermcap \ - maybe-install-info-target-winsup \ - maybe-install-info-target-libgloss \ - maybe-install-info-target-libiberty \ - maybe-install-info-target-gperf \ - maybe-install-info-target-examples \ - maybe-install-info-target-libffi \ - maybe-install-info-target-libjava \ - maybe-install-info-target-zlib \ - maybe-install-info-target-boehm-gc \ - maybe-install-info-target-qthreads \ - maybe-install-info-target-rda \ - maybe-install-info-target-libada +.PHONY: install-gnuserv maybe-install-gnuserv +maybe-install-gnuserv: -# GCC, the eternal special case -.PHONY: maybe-install-info-gcc install-info-gcc -maybe-install-info-gcc: -install-info-gcc: \ - configure-gcc \ - info-gcc - @[ -f ./gcc/Makefile ] || exit 0; \ - r=`${PWD_COMMAND}`; export r; \ +install-gnuserv: installdirs + @r=`${PWD_COMMAND}`; export r; \ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ $(SET_LIB_PATH) \ - for flag in $(EXTRA_GCC_FLAGS); do \ - eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \ - done; \ - echo "Doing install-info in gcc" ; \ - (cd gcc && \ - $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \ - "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \ - "RANLIB=$${RANLIB}" \ - "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" \ - install-info) \ - || exit 1 + (cd gnuserv && $(MAKE) $(FLAGS_TO_PASS) install) -# Host modules. -.PHONY: maybe-install-info-ash install-info-ash -maybe-install-info-ash: +# Other targets (info, dvi, etc.) -install-info-ash: \ - configure-ash \ - info-ash - @[ -f ./ash/Makefile ] || exit 0; \ +.PHONY: maybe-info-gnuserv info-gnuserv +maybe-info-gnuserv: + +info-gnuserv: \ + configure-gnuserv + @[ -f ./gnuserv/Makefile ] || exit 0; \ r=`${PWD_COMMAND}`; export r; \ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ $(SET_LIB_PATH) \ for flag in $(EXTRA_HOST_FLAGS); do \ eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \ done; \ - echo "Doing install-info in ash" ; \ - (cd ash && \ + echo "Doing info in gnuserv" ; \ + (cd gnuserv && \ $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \ "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \ "RANLIB=$${RANLIB}" \ "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" \ - install-info) \ + info) \ || exit 1 -.PHONY: maybe-install-info-autoconf install-info-autoconf -maybe-install-info-autoconf: +.PHONY: maybe-dvi-gnuserv dvi-gnuserv +maybe-dvi-gnuserv: -install-info-autoconf: \ - configure-autoconf \ - info-autoconf - @[ -f ./autoconf/Makefile ] || exit 0; \ +dvi-gnuserv: \ + configure-gnuserv + @[ -f ./gnuserv/Makefile ] || exit 0; \ r=`${PWD_COMMAND}`; export r; \ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ $(SET_LIB_PATH) \ for flag in $(EXTRA_HOST_FLAGS); do \ eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \ done; \ - echo "Doing install-info in autoconf" ; \ - (cd autoconf && \ + echo "Doing dvi in gnuserv" ; \ + (cd gnuserv && \ $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \ "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \ "RANLIB=$${RANLIB}" \ "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" \ - install-info) \ + dvi) \ || exit 1 -.PHONY: maybe-install-info-automake install-info-automake -maybe-install-info-automake: +.PHONY: maybe-TAGS-gnuserv TAGS-gnuserv +maybe-TAGS-gnuserv: -install-info-automake: \ - configure-automake \ - info-automake - @[ -f ./automake/Makefile ] || exit 0; \ +TAGS-gnuserv: \ + configure-gnuserv + @[ -f ./gnuserv/Makefile ] || exit 0; \ r=`${PWD_COMMAND}`; export r; \ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ $(SET_LIB_PATH) \ for flag in $(EXTRA_HOST_FLAGS); do \ eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \ done; \ - echo "Doing install-info in automake" ; \ - (cd automake && \ + echo "Doing TAGS in gnuserv" ; \ + (cd gnuserv && \ $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \ "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \ "RANLIB=$${RANLIB}" \ "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" \ - install-info) \ + TAGS) \ || exit 1 -.PHONY: maybe-install-info-bash install-info-bash -maybe-install-info-bash: +.PHONY: maybe-install-info-gnuserv install-info-gnuserv +maybe-install-info-gnuserv: -install-info-bash: \ - configure-bash \ - info-bash - @[ -f ./bash/Makefile ] || exit 0; \ +install-info-gnuserv: \ + configure-gnuserv \ + info-gnuserv + @[ -f ./gnuserv/Makefile ] || exit 0; \ r=`${PWD_COMMAND}`; export r; \ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ $(SET_LIB_PATH) \ for flag in $(EXTRA_HOST_FLAGS); do \ eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \ done; \ - echo "Doing install-info in bash" ; \ - (cd bash && \ + echo "Doing install-info in gnuserv" ; \ + (cd gnuserv && \ $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \ "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \ "RANLIB=$${RANLIB}" \ @@ -6611,251 +7966,263 @@ install-info-bash: \ || exit 1 -.PHONY: maybe-install-info-bfd install-info-bfd -maybe-install-info-bfd: +.PHONY: maybe-installcheck-gnuserv installcheck-gnuserv +maybe-installcheck-gnuserv: -install-info-bfd: \ - configure-bfd \ - info-bfd - @[ -f ./bfd/Makefile ] || exit 0; \ +installcheck-gnuserv: \ + configure-gnuserv + @[ -f ./gnuserv/Makefile ] || exit 0; \ r=`${PWD_COMMAND}`; export r; \ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ $(SET_LIB_PATH) \ for flag in $(EXTRA_HOST_FLAGS); do \ eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \ done; \ - echo "Doing install-info in bfd" ; \ - (cd bfd && \ + echo "Doing installcheck in gnuserv" ; \ + (cd gnuserv && \ $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \ "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \ "RANLIB=$${RANLIB}" \ "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" \ - install-info) \ + installcheck) \ || exit 1 -.PHONY: maybe-install-info-opcodes install-info-opcodes -maybe-install-info-opcodes: +.PHONY: maybe-mostlyclean-gnuserv mostlyclean-gnuserv +maybe-mostlyclean-gnuserv: -install-info-opcodes: \ - configure-opcodes \ - info-opcodes - @[ -f ./opcodes/Makefile ] || exit 0; \ +mostlyclean-gnuserv: + @[ -f ./gnuserv/Makefile ] || exit 0; \ r=`${PWD_COMMAND}`; export r; \ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ $(SET_LIB_PATH) \ for flag in $(EXTRA_HOST_FLAGS); do \ eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \ done; \ - echo "Doing install-info in opcodes" ; \ - (cd opcodes && \ + echo "Doing mostlyclean in gnuserv" ; \ + (cd gnuserv && \ $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \ "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \ "RANLIB=$${RANLIB}" \ "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" \ - install-info) \ + mostlyclean) \ || exit 1 -.PHONY: maybe-install-info-binutils install-info-binutils -maybe-install-info-binutils: +.PHONY: maybe-clean-gnuserv clean-gnuserv +maybe-clean-gnuserv: -install-info-binutils: \ - configure-binutils \ - info-binutils - @[ -f ./binutils/Makefile ] || exit 0; \ +clean-gnuserv: + @[ -f ./gnuserv/Makefile ] || exit 0; \ r=`${PWD_COMMAND}`; export r; \ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ $(SET_LIB_PATH) \ for flag in $(EXTRA_HOST_FLAGS); do \ eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \ done; \ - echo "Doing install-info in binutils" ; \ - (cd binutils && \ + echo "Doing clean in gnuserv" ; \ + (cd gnuserv && \ $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \ "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \ "RANLIB=$${RANLIB}" \ "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" \ - install-info) \ + clean) \ || exit 1 -.PHONY: maybe-install-info-bison install-info-bison -maybe-install-info-bison: +.PHONY: maybe-distclean-gnuserv distclean-gnuserv +maybe-distclean-gnuserv: -install-info-bison: \ - configure-bison \ - info-bison - @[ -f ./bison/Makefile ] || exit 0; \ +distclean-gnuserv: + @[ -f ./gnuserv/Makefile ] || exit 0; \ r=`${PWD_COMMAND}`; export r; \ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ $(SET_LIB_PATH) \ for flag in $(EXTRA_HOST_FLAGS); do \ eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \ done; \ - echo "Doing install-info in bison" ; \ - (cd bison && \ + echo "Doing distclean in gnuserv" ; \ + (cd gnuserv && \ $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \ "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \ "RANLIB=$${RANLIB}" \ "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" \ - install-info) \ + distclean) \ || exit 1 -.PHONY: maybe-install-info-byacc install-info-byacc -maybe-install-info-byacc: +.PHONY: maybe-maintainer-clean-gnuserv maintainer-clean-gnuserv +maybe-maintainer-clean-gnuserv: -install-info-byacc: \ - configure-byacc \ - info-byacc - @[ -f ./byacc/Makefile ] || exit 0; \ +maintainer-clean-gnuserv: + @[ -f ./gnuserv/Makefile ] || exit 0; \ r=`${PWD_COMMAND}`; export r; \ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ $(SET_LIB_PATH) \ for flag in $(EXTRA_HOST_FLAGS); do \ eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \ done; \ - echo "Doing install-info in byacc" ; \ - (cd byacc && \ + echo "Doing maintainer-clean in gnuserv" ; \ + (cd gnuserv && \ $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \ "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \ "RANLIB=$${RANLIB}" \ "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" \ - install-info) \ + maintainer-clean) \ || exit 1 -.PHONY: maybe-install-info-bzip2 install-info-bzip2 -maybe-install-info-bzip2: -install-info-bzip2: \ - configure-bzip2 \ - info-bzip2 - @[ -f ./bzip2/Makefile ] || exit 0; \ +.PHONY: configure-gprof maybe-configure-gprof +maybe-configure-gprof: +configure-gprof: + @test ! -f gprof/Makefile || exit 0; \ + [ -d gprof ] || mkdir gprof; \ r=`${PWD_COMMAND}`; export r; \ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ - $(SET_LIB_PATH) \ - for flag in $(EXTRA_HOST_FLAGS); do \ - eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \ - done; \ - echo "Doing install-info in bzip2" ; \ - (cd bzip2 && \ - $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \ - "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \ - "RANLIB=$${RANLIB}" \ - "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" \ - install-info) \ + CC="$(CC)"; export CC; \ + CFLAGS="$(CFLAGS)"; export CFLAGS; \ + CONFIG_SHELL="$(SHELL)"; export CONFIG_SHELL; \ + CXX="$(CXX)"; export CXX; \ + CXXFLAGS="$(CXXFLAGS)"; export CXXFLAGS; \ + AR="$(AR)"; export AR; \ + AS="$(AS)"; export AS; \ + CC_FOR_BUILD="$(CC_FOR_BUILD)"; export CC_FOR_BUILD; \ + DLLTOOL="$(DLLTOOL)"; export DLLTOOL; \ + LD="$(LD)"; export LD; \ + NM="$(NM)"; export NM; \ + RANLIB="$(RANLIB)"; export RANLIB; \ + WINDRES="$(WINDRES)"; export WINDRES; \ + OBJCOPY="$(OBJCOPY)"; export OBJCOPY; \ + OBJDUMP="$(OBJDUMP)"; export OBJDUMP; \ + echo Configuring in gprof; \ + cd gprof || exit 1; \ + case $(srcdir) in \ + \.) \ + srcdiroption="--srcdir=."; \ + libsrcdir=".";; \ + /* | [A-Za-z]:[\\/]*) \ + srcdiroption="--srcdir=$(srcdir)/gprof"; \ + libsrcdir="$$s/gprof";; \ + *) \ + srcdiroption="--srcdir=../$(srcdir)/gprof"; \ + libsrcdir="$$s/gprof";; \ + esac; \ + $(SHELL) $${libsrcdir}/configure \ + $(HOST_CONFIGARGS) $${srcdiroption} \ || exit 1 +.PHONY: all-gprof maybe-all-gprof +maybe-all-gprof: +all-gprof: configure-gprof + @r=`${PWD_COMMAND}`; export r; \ + s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ + $(SET_LIB_PATH) \ + (cd gprof && $(MAKE) $(FLAGS_TO_PASS) all) -.PHONY: maybe-install-info-dejagnu install-info-dejagnu -maybe-install-info-dejagnu: +.PHONY: check-gprof maybe-check-gprof +maybe-check-gprof: -install-info-dejagnu: \ - configure-dejagnu \ - info-dejagnu - @[ -f ./dejagnu/Makefile ] || exit 0; \ - r=`${PWD_COMMAND}`; export r; \ +check-gprof: + @r=`${PWD_COMMAND}`; export r; \ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ $(SET_LIB_PATH) \ - for flag in $(EXTRA_HOST_FLAGS); do \ - eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \ - done; \ - echo "Doing install-info in dejagnu" ; \ - (cd dejagnu && \ - $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \ - "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \ - "RANLIB=$${RANLIB}" \ - "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" \ - install-info) \ - || exit 1 + (cd gprof && $(MAKE) $(FLAGS_TO_PASS) check) -.PHONY: maybe-install-info-diff install-info-diff -maybe-install-info-diff: +.PHONY: install-gprof maybe-install-gprof +maybe-install-gprof: -install-info-diff: \ - configure-diff \ - info-diff - @[ -f ./diff/Makefile ] || exit 0; \ +install-gprof: installdirs + @r=`${PWD_COMMAND}`; export r; \ + s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ + $(SET_LIB_PATH) \ + (cd gprof && $(MAKE) $(FLAGS_TO_PASS) install) + + +# Other targets (info, dvi, etc.) + +.PHONY: maybe-info-gprof info-gprof +maybe-info-gprof: + +info-gprof: \ + configure-gprof + @[ -f ./gprof/Makefile ] || exit 0; \ r=`${PWD_COMMAND}`; export r; \ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ $(SET_LIB_PATH) \ for flag in $(EXTRA_HOST_FLAGS); do \ eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \ done; \ - echo "Doing install-info in diff" ; \ - (cd diff && \ + echo "Doing info in gprof" ; \ + (cd gprof && \ $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \ "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \ "RANLIB=$${RANLIB}" \ "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" \ - install-info) \ + info) \ || exit 1 -.PHONY: maybe-install-info-dosutils install-info-dosutils -maybe-install-info-dosutils: +.PHONY: maybe-dvi-gprof dvi-gprof +maybe-dvi-gprof: -install-info-dosutils: \ - configure-dosutils \ - info-dosutils - @[ -f ./dosutils/Makefile ] || exit 0; \ +dvi-gprof: \ + configure-gprof + @[ -f ./gprof/Makefile ] || exit 0; \ r=`${PWD_COMMAND}`; export r; \ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ $(SET_LIB_PATH) \ for flag in $(EXTRA_HOST_FLAGS); do \ eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \ done; \ - echo "Doing install-info in dosutils" ; \ - (cd dosutils && \ + echo "Doing dvi in gprof" ; \ + (cd gprof && \ $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \ "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \ "RANLIB=$${RANLIB}" \ "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" \ - install-info) \ + dvi) \ || exit 1 -.PHONY: maybe-install-info-etc install-info-etc -maybe-install-info-etc: +.PHONY: maybe-TAGS-gprof TAGS-gprof +maybe-TAGS-gprof: -install-info-etc: \ - configure-etc \ - info-etc - @[ -f ./etc/Makefile ] || exit 0; \ +TAGS-gprof: \ + configure-gprof + @[ -f ./gprof/Makefile ] || exit 0; \ r=`${PWD_COMMAND}`; export r; \ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ $(SET_LIB_PATH) \ for flag in $(EXTRA_HOST_FLAGS); do \ eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \ done; \ - echo "Doing install-info in etc" ; \ - (cd etc && \ + echo "Doing TAGS in gprof" ; \ + (cd gprof && \ $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \ "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \ "RANLIB=$${RANLIB}" \ "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" \ - install-info) \ + TAGS) \ || exit 1 -.PHONY: maybe-install-info-fastjar install-info-fastjar -maybe-install-info-fastjar: +.PHONY: maybe-install-info-gprof install-info-gprof +maybe-install-info-gprof: -install-info-fastjar: \ - configure-fastjar \ - info-fastjar - @[ -f ./fastjar/Makefile ] || exit 0; \ +install-info-gprof: \ + configure-gprof \ + info-gprof + @[ -f ./gprof/Makefile ] || exit 0; \ r=`${PWD_COMMAND}`; export r; \ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ $(SET_LIB_PATH) \ for flag in $(EXTRA_HOST_FLAGS); do \ eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \ done; \ - echo "Doing install-info in fastjar" ; \ - (cd fastjar && \ + echo "Doing install-info in gprof" ; \ + (cd gprof && \ $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \ "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \ "RANLIB=$${RANLIB}" \ @@ -6864,210 +8231,245 @@ install-info-fastjar: \ || exit 1 -.PHONY: maybe-install-info-fileutils install-info-fileutils -maybe-install-info-fileutils: +.PHONY: maybe-installcheck-gprof installcheck-gprof +maybe-installcheck-gprof: -install-info-fileutils: \ - configure-fileutils \ - info-fileutils - @[ -f ./fileutils/Makefile ] || exit 0; \ +installcheck-gprof: \ + configure-gprof + @[ -f ./gprof/Makefile ] || exit 0; \ r=`${PWD_COMMAND}`; export r; \ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ $(SET_LIB_PATH) \ for flag in $(EXTRA_HOST_FLAGS); do \ eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \ done; \ - echo "Doing install-info in fileutils" ; \ - (cd fileutils && \ + echo "Doing installcheck in gprof" ; \ + (cd gprof && \ $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \ "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \ "RANLIB=$${RANLIB}" \ "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" \ - install-info) \ + installcheck) \ || exit 1 -.PHONY: maybe-install-info-findutils install-info-findutils -maybe-install-info-findutils: +.PHONY: maybe-mostlyclean-gprof mostlyclean-gprof +maybe-mostlyclean-gprof: -install-info-findutils: \ - configure-findutils \ - info-findutils - @[ -f ./findutils/Makefile ] || exit 0; \ +mostlyclean-gprof: + @[ -f ./gprof/Makefile ] || exit 0; \ r=`${PWD_COMMAND}`; export r; \ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ $(SET_LIB_PATH) \ for flag in $(EXTRA_HOST_FLAGS); do \ eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \ done; \ - echo "Doing install-info in findutils" ; \ - (cd findutils && \ + echo "Doing mostlyclean in gprof" ; \ + (cd gprof && \ $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \ "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \ "RANLIB=$${RANLIB}" \ "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" \ - install-info) \ + mostlyclean) \ || exit 1 -.PHONY: maybe-install-info-find install-info-find -maybe-install-info-find: +.PHONY: maybe-clean-gprof clean-gprof +maybe-clean-gprof: -install-info-find: \ - configure-find \ - info-find - @[ -f ./find/Makefile ] || exit 0; \ +clean-gprof: + @[ -f ./gprof/Makefile ] || exit 0; \ r=`${PWD_COMMAND}`; export r; \ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ $(SET_LIB_PATH) \ for flag in $(EXTRA_HOST_FLAGS); do \ eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \ done; \ - echo "Doing install-info in find" ; \ - (cd find && \ + echo "Doing clean in gprof" ; \ + (cd gprof && \ $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \ "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \ "RANLIB=$${RANLIB}" \ "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" \ - install-info) \ + clean) \ || exit 1 -.PHONY: maybe-install-info-flex install-info-flex -maybe-install-info-flex: +.PHONY: maybe-distclean-gprof distclean-gprof +maybe-distclean-gprof: -install-info-flex: \ - configure-flex \ - info-flex - @[ -f ./flex/Makefile ] || exit 0; \ +distclean-gprof: + @[ -f ./gprof/Makefile ] || exit 0; \ r=`${PWD_COMMAND}`; export r; \ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ $(SET_LIB_PATH) \ for flag in $(EXTRA_HOST_FLAGS); do \ eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \ done; \ - echo "Doing install-info in flex" ; \ - (cd flex && \ + echo "Doing distclean in gprof" ; \ + (cd gprof && \ $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \ "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \ "RANLIB=$${RANLIB}" \ "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" \ - install-info) \ + distclean) \ || exit 1 -.PHONY: maybe-install-info-gas install-info-gas -maybe-install-info-gas: +.PHONY: maybe-maintainer-clean-gprof maintainer-clean-gprof +maybe-maintainer-clean-gprof: -install-info-gas: \ - configure-gas \ - info-gas - @[ -f ./gas/Makefile ] || exit 0; \ +maintainer-clean-gprof: + @[ -f ./gprof/Makefile ] || exit 0; \ r=`${PWD_COMMAND}`; export r; \ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ $(SET_LIB_PATH) \ for flag in $(EXTRA_HOST_FLAGS); do \ eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \ done; \ - echo "Doing install-info in gas" ; \ - (cd gas && \ + echo "Doing maintainer-clean in gprof" ; \ + (cd gprof && \ $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \ "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \ "RANLIB=$${RANLIB}" \ "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" \ - install-info) \ + maintainer-clean) \ || exit 1 -.PHONY: maybe-install-info-gawk install-info-gawk -maybe-install-info-gawk: -install-info-gawk: \ - configure-gawk \ - info-gawk - @[ -f ./gawk/Makefile ] || exit 0; \ +.PHONY: configure-gzip maybe-configure-gzip +maybe-configure-gzip: +configure-gzip: + @test ! -f gzip/Makefile || exit 0; \ + [ -d gzip ] || mkdir gzip; \ r=`${PWD_COMMAND}`; export r; \ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ - $(SET_LIB_PATH) \ - for flag in $(EXTRA_HOST_FLAGS); do \ - eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \ - done; \ - echo "Doing install-info in gawk" ; \ - (cd gawk && \ - $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \ - "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \ - "RANLIB=$${RANLIB}" \ - "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" \ - install-info) \ + CC="$(CC)"; export CC; \ + CFLAGS="$(CFLAGS)"; export CFLAGS; \ + CONFIG_SHELL="$(SHELL)"; export CONFIG_SHELL; \ + CXX="$(CXX)"; export CXX; \ + CXXFLAGS="$(CXXFLAGS)"; export CXXFLAGS; \ + AR="$(AR)"; export AR; \ + AS="$(AS)"; export AS; \ + CC_FOR_BUILD="$(CC_FOR_BUILD)"; export CC_FOR_BUILD; \ + DLLTOOL="$(DLLTOOL)"; export DLLTOOL; \ + LD="$(LD)"; export LD; \ + NM="$(NM)"; export NM; \ + RANLIB="$(RANLIB)"; export RANLIB; \ + WINDRES="$(WINDRES)"; export WINDRES; \ + OBJCOPY="$(OBJCOPY)"; export OBJCOPY; \ + OBJDUMP="$(OBJDUMP)"; export OBJDUMP; \ + echo Configuring in gzip; \ + cd gzip || exit 1; \ + case $(srcdir) in \ + \.) \ + srcdiroption="--srcdir=."; \ + libsrcdir=".";; \ + /* | [A-Za-z]:[\\/]*) \ + srcdiroption="--srcdir=$(srcdir)/gzip"; \ + libsrcdir="$$s/gzip";; \ + *) \ + srcdiroption="--srcdir=../$(srcdir)/gzip"; \ + libsrcdir="$$s/gzip";; \ + esac; \ + $(SHELL) $${libsrcdir}/configure \ + $(HOST_CONFIGARGS) $${srcdiroption} \ || exit 1 +.PHONY: all-gzip maybe-all-gzip +maybe-all-gzip: +all-gzip: configure-gzip + @r=`${PWD_COMMAND}`; export r; \ + s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ + $(SET_LIB_PATH) \ + (cd gzip && $(MAKE) $(FLAGS_TO_PASS) all) -.PHONY: maybe-install-info-gettext install-info-gettext -maybe-install-info-gettext: +.PHONY: check-gzip maybe-check-gzip +maybe-check-gzip: -install-info-gettext: \ - configure-gettext \ - info-gettext - @[ -f ./gettext/Makefile ] || exit 0; \ +check-gzip: + @r=`${PWD_COMMAND}`; export r; \ + s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ + $(SET_LIB_PATH) \ + (cd gzip && $(MAKE) $(FLAGS_TO_PASS) check) + + +.PHONY: install-gzip maybe-install-gzip +maybe-install-gzip: + +install-gzip: installdirs + @r=`${PWD_COMMAND}`; export r; \ + s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ + $(SET_LIB_PATH) \ + (cd gzip && $(MAKE) $(FLAGS_TO_PASS) install) + + +# Other targets (info, dvi, etc.) + +.PHONY: maybe-info-gzip info-gzip +maybe-info-gzip: + +info-gzip: \ + configure-gzip + @[ -f ./gzip/Makefile ] || exit 0; \ r=`${PWD_COMMAND}`; export r; \ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ $(SET_LIB_PATH) \ for flag in $(EXTRA_HOST_FLAGS); do \ eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \ done; \ - echo "Doing install-info in gettext" ; \ - (cd gettext && \ + echo "Doing info in gzip" ; \ + (cd gzip && \ $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \ "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \ "RANLIB=$${RANLIB}" \ "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" \ - install-info) \ + info) \ || exit 1 -.PHONY: maybe-install-info-gnuserv install-info-gnuserv -maybe-install-info-gnuserv: +.PHONY: maybe-dvi-gzip dvi-gzip +maybe-dvi-gzip: -install-info-gnuserv: \ - configure-gnuserv \ - info-gnuserv - @[ -f ./gnuserv/Makefile ] || exit 0; \ +dvi-gzip: \ + configure-gzip + @[ -f ./gzip/Makefile ] || exit 0; \ r=`${PWD_COMMAND}`; export r; \ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ $(SET_LIB_PATH) \ for flag in $(EXTRA_HOST_FLAGS); do \ eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \ done; \ - echo "Doing install-info in gnuserv" ; \ - (cd gnuserv && \ + echo "Doing dvi in gzip" ; \ + (cd gzip && \ $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \ "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \ "RANLIB=$${RANLIB}" \ "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" \ - install-info) \ + dvi) \ || exit 1 -.PHONY: maybe-install-info-gprof install-info-gprof -maybe-install-info-gprof: +.PHONY: maybe-TAGS-gzip TAGS-gzip +maybe-TAGS-gzip: -install-info-gprof: \ - configure-gprof \ - info-gprof - @[ -f ./gprof/Makefile ] || exit 0; \ +TAGS-gzip: \ + configure-gzip + @[ -f ./gzip/Makefile ] || exit 0; \ r=`${PWD_COMMAND}`; export r; \ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ $(SET_LIB_PATH) \ for flag in $(EXTRA_HOST_FLAGS); do \ eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \ done; \ - echo "Doing install-info in gprof" ; \ - (cd gprof && \ + echo "Doing TAGS in gzip" ; \ + (cd gzip && \ $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \ "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \ "RANLIB=$${RANLIB}" \ "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" \ - install-info) \ + TAGS) \ || exit 1 @@ -7094,228 +8496,263 @@ install-info-gzip: \ || exit 1 -.PHONY: maybe-install-info-hello install-info-hello -maybe-install-info-hello: +.PHONY: maybe-installcheck-gzip installcheck-gzip +maybe-installcheck-gzip: -install-info-hello: \ - configure-hello \ - info-hello - @[ -f ./hello/Makefile ] || exit 0; \ +installcheck-gzip: \ + configure-gzip + @[ -f ./gzip/Makefile ] || exit 0; \ r=`${PWD_COMMAND}`; export r; \ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ $(SET_LIB_PATH) \ for flag in $(EXTRA_HOST_FLAGS); do \ eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \ done; \ - echo "Doing install-info in hello" ; \ - (cd hello && \ + echo "Doing installcheck in gzip" ; \ + (cd gzip && \ $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \ "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \ "RANLIB=$${RANLIB}" \ "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" \ - install-info) \ + installcheck) \ || exit 1 -.PHONY: maybe-install-info-indent install-info-indent -maybe-install-info-indent: +.PHONY: maybe-mostlyclean-gzip mostlyclean-gzip +maybe-mostlyclean-gzip: -install-info-indent: \ - configure-indent \ - info-indent - @[ -f ./indent/Makefile ] || exit 0; \ +mostlyclean-gzip: + @[ -f ./gzip/Makefile ] || exit 0; \ r=`${PWD_COMMAND}`; export r; \ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ $(SET_LIB_PATH) \ for flag in $(EXTRA_HOST_FLAGS); do \ eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \ done; \ - echo "Doing install-info in indent" ; \ - (cd indent && \ + echo "Doing mostlyclean in gzip" ; \ + (cd gzip && \ $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \ "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \ "RANLIB=$${RANLIB}" \ "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" \ - install-info) \ + mostlyclean) \ || exit 1 -.PHONY: maybe-install-info-intl install-info-intl -maybe-install-info-intl: +.PHONY: maybe-clean-gzip clean-gzip +maybe-clean-gzip: -install-info-intl: \ - configure-intl \ - info-intl - @[ -f ./intl/Makefile ] || exit 0; \ +clean-gzip: + @[ -f ./gzip/Makefile ] || exit 0; \ r=`${PWD_COMMAND}`; export r; \ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ $(SET_LIB_PATH) \ for flag in $(EXTRA_HOST_FLAGS); do \ eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \ done; \ - echo "Doing install-info in intl" ; \ - (cd intl && \ + echo "Doing clean in gzip" ; \ + (cd gzip && \ $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \ "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \ "RANLIB=$${RANLIB}" \ "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" \ - install-info) \ + clean) \ || exit 1 -.PHONY: maybe-install-info-tcl install-info-tcl -maybe-install-info-tcl: +.PHONY: maybe-distclean-gzip distclean-gzip +maybe-distclean-gzip: -install-info-tcl: \ - configure-tcl \ - info-tcl - @[ -f ./tcl/Makefile ] || exit 0; \ +distclean-gzip: + @[ -f ./gzip/Makefile ] || exit 0; \ r=`${PWD_COMMAND}`; export r; \ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ $(SET_LIB_PATH) \ for flag in $(EXTRA_HOST_FLAGS); do \ eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \ done; \ - echo "Doing install-info in tcl" ; \ - (cd tcl && \ + echo "Doing distclean in gzip" ; \ + (cd gzip && \ $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \ "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \ "RANLIB=$${RANLIB}" \ "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" \ - install-info) \ + distclean) \ || exit 1 -.PHONY: maybe-install-info-itcl install-info-itcl -maybe-install-info-itcl: +.PHONY: maybe-maintainer-clean-gzip maintainer-clean-gzip +maybe-maintainer-clean-gzip: -install-info-itcl: \ - configure-itcl \ - info-itcl - @[ -f ./itcl/Makefile ] || exit 0; \ +maintainer-clean-gzip: + @[ -f ./gzip/Makefile ] || exit 0; \ r=`${PWD_COMMAND}`; export r; \ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ $(SET_LIB_PATH) \ for flag in $(EXTRA_HOST_FLAGS); do \ eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \ done; \ - echo "Doing install-info in itcl" ; \ - (cd itcl && \ + echo "Doing maintainer-clean in gzip" ; \ + (cd gzip && \ $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \ "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \ "RANLIB=$${RANLIB}" \ "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" \ - install-info) \ + maintainer-clean) \ || exit 1 -.PHONY: maybe-install-info-ld install-info-ld -maybe-install-info-ld: -install-info-ld: \ - configure-ld \ - info-ld - @[ -f ./ld/Makefile ] || exit 0; \ +.PHONY: configure-hello maybe-configure-hello +maybe-configure-hello: +configure-hello: + @test ! -f hello/Makefile || exit 0; \ + [ -d hello ] || mkdir hello; \ r=`${PWD_COMMAND}`; export r; \ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ - $(SET_LIB_PATH) \ - for flag in $(EXTRA_HOST_FLAGS); do \ - eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \ - done; \ - echo "Doing install-info in ld" ; \ - (cd ld && \ - $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \ - "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \ - "RANLIB=$${RANLIB}" \ - "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" \ - install-info) \ + CC="$(CC)"; export CC; \ + CFLAGS="$(CFLAGS)"; export CFLAGS; \ + CONFIG_SHELL="$(SHELL)"; export CONFIG_SHELL; \ + CXX="$(CXX)"; export CXX; \ + CXXFLAGS="$(CXXFLAGS)"; export CXXFLAGS; \ + AR="$(AR)"; export AR; \ + AS="$(AS)"; export AS; \ + CC_FOR_BUILD="$(CC_FOR_BUILD)"; export CC_FOR_BUILD; \ + DLLTOOL="$(DLLTOOL)"; export DLLTOOL; \ + LD="$(LD)"; export LD; \ + NM="$(NM)"; export NM; \ + RANLIB="$(RANLIB)"; export RANLIB; \ + WINDRES="$(WINDRES)"; export WINDRES; \ + OBJCOPY="$(OBJCOPY)"; export OBJCOPY; \ + OBJDUMP="$(OBJDUMP)"; export OBJDUMP; \ + echo Configuring in hello; \ + cd hello || exit 1; \ + case $(srcdir) in \ + \.) \ + srcdiroption="--srcdir=."; \ + libsrcdir=".";; \ + /* | [A-Za-z]:[\\/]*) \ + srcdiroption="--srcdir=$(srcdir)/hello"; \ + libsrcdir="$$s/hello";; \ + *) \ + srcdiroption="--srcdir=../$(srcdir)/hello"; \ + libsrcdir="$$s/hello";; \ + esac; \ + $(SHELL) $${libsrcdir}/configure \ + $(HOST_CONFIGARGS) $${srcdiroption} \ || exit 1 +.PHONY: all-hello maybe-all-hello +maybe-all-hello: +all-hello: configure-hello + @r=`${PWD_COMMAND}`; export r; \ + s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ + $(SET_LIB_PATH) \ + (cd hello && $(MAKE) $(FLAGS_TO_PASS) all) -.PHONY: maybe-install-info-libgui install-info-libgui -maybe-install-info-libgui: +.PHONY: check-hello maybe-check-hello +maybe-check-hello: -install-info-libgui: \ - configure-libgui \ - info-libgui - @[ -f ./libgui/Makefile ] || exit 0; \ +check-hello: + @r=`${PWD_COMMAND}`; export r; \ + s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ + $(SET_LIB_PATH) \ + (cd hello && $(MAKE) $(FLAGS_TO_PASS) check) + + +.PHONY: install-hello maybe-install-hello +maybe-install-hello: + +install-hello: installdirs + @r=`${PWD_COMMAND}`; export r; \ + s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ + $(SET_LIB_PATH) \ + (cd hello && $(MAKE) $(FLAGS_TO_PASS) install) + + +# Other targets (info, dvi, etc.) + +.PHONY: maybe-info-hello info-hello +maybe-info-hello: + +info-hello: \ + configure-hello + @[ -f ./hello/Makefile ] || exit 0; \ r=`${PWD_COMMAND}`; export r; \ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ $(SET_LIB_PATH) \ for flag in $(EXTRA_HOST_FLAGS); do \ eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \ done; \ - echo "Doing install-info in libgui" ; \ - (cd libgui && \ + echo "Doing info in hello" ; \ + (cd hello && \ $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \ "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \ "RANLIB=$${RANLIB}" \ "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" \ - install-info) \ + info) \ || exit 1 -.PHONY: maybe-install-info-libiberty install-info-libiberty -maybe-install-info-libiberty: +.PHONY: maybe-dvi-hello dvi-hello +maybe-dvi-hello: -install-info-libiberty: \ - configure-libiberty \ - info-libiberty - @[ -f ./libiberty/Makefile ] || exit 0; \ +dvi-hello: \ + configure-hello + @[ -f ./hello/Makefile ] || exit 0; \ r=`${PWD_COMMAND}`; export r; \ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ $(SET_LIB_PATH) \ for flag in $(EXTRA_HOST_FLAGS); do \ eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \ done; \ - echo "Doing install-info in libiberty" ; \ - (cd libiberty && \ + echo "Doing dvi in hello" ; \ + (cd hello && \ $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \ "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \ "RANLIB=$${RANLIB}" \ "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" \ - install-info) \ + dvi) \ || exit 1 -.PHONY: maybe-install-info-libtool install-info-libtool -maybe-install-info-libtool: +.PHONY: maybe-TAGS-hello TAGS-hello +maybe-TAGS-hello: -install-info-libtool: \ - configure-libtool \ - info-libtool - @[ -f ./libtool/Makefile ] || exit 0; \ +TAGS-hello: \ + configure-hello + @[ -f ./hello/Makefile ] || exit 0; \ r=`${PWD_COMMAND}`; export r; \ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ $(SET_LIB_PATH) \ for flag in $(EXTRA_HOST_FLAGS); do \ eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \ done; \ - echo "Doing install-info in libtool" ; \ - (cd libtool && \ + echo "Doing TAGS in hello" ; \ + (cd hello && \ $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \ "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \ "RANLIB=$${RANLIB}" \ "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" \ - install-info) \ + TAGS) \ || exit 1 -.PHONY: maybe-install-info-m4 install-info-m4 -maybe-install-info-m4: +.PHONY: maybe-install-info-hello install-info-hello +maybe-install-info-hello: -install-info-m4: \ - configure-m4 \ - info-m4 - @[ -f ./m4/Makefile ] || exit 0; \ +install-info-hello: \ + configure-hello \ + info-hello + @[ -f ./hello/Makefile ] || exit 0; \ r=`${PWD_COMMAND}`; export r; \ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ $(SET_LIB_PATH) \ for flag in $(EXTRA_HOST_FLAGS); do \ eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \ done; \ - echo "Doing install-info in m4" ; \ - (cd m4 && \ + echo "Doing install-info in hello" ; \ + (cd hello && \ $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \ "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \ "RANLIB=$${RANLIB}" \ @@ -7324,228 +8761,263 @@ install-info-m4: \ || exit 1 -.PHONY: maybe-install-info-make install-info-make -maybe-install-info-make: +.PHONY: maybe-installcheck-hello installcheck-hello +maybe-installcheck-hello: -install-info-make: \ - configure-make \ - info-make - @[ -f ./make/Makefile ] || exit 0; \ +installcheck-hello: \ + configure-hello + @[ -f ./hello/Makefile ] || exit 0; \ r=`${PWD_COMMAND}`; export r; \ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ $(SET_LIB_PATH) \ for flag in $(EXTRA_HOST_FLAGS); do \ eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \ done; \ - echo "Doing install-info in make" ; \ - (cd make && \ + echo "Doing installcheck in hello" ; \ + (cd hello && \ $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \ "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \ "RANLIB=$${RANLIB}" \ "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" \ - install-info) \ + installcheck) \ || exit 1 -.PHONY: maybe-install-info-mmalloc install-info-mmalloc -maybe-install-info-mmalloc: +.PHONY: maybe-mostlyclean-hello mostlyclean-hello +maybe-mostlyclean-hello: -install-info-mmalloc: \ - configure-mmalloc \ - info-mmalloc - @[ -f ./mmalloc/Makefile ] || exit 0; \ +mostlyclean-hello: + @[ -f ./hello/Makefile ] || exit 0; \ r=`${PWD_COMMAND}`; export r; \ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ $(SET_LIB_PATH) \ for flag in $(EXTRA_HOST_FLAGS); do \ eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \ done; \ - echo "Doing install-info in mmalloc" ; \ - (cd mmalloc && \ + echo "Doing mostlyclean in hello" ; \ + (cd hello && \ $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \ "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \ "RANLIB=$${RANLIB}" \ "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" \ - install-info) \ + mostlyclean) \ || exit 1 -.PHONY: maybe-install-info-patch install-info-patch -maybe-install-info-patch: +.PHONY: maybe-clean-hello clean-hello +maybe-clean-hello: -install-info-patch: \ - configure-patch \ - info-patch - @[ -f ./patch/Makefile ] || exit 0; \ +clean-hello: + @[ -f ./hello/Makefile ] || exit 0; \ r=`${PWD_COMMAND}`; export r; \ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ $(SET_LIB_PATH) \ for flag in $(EXTRA_HOST_FLAGS); do \ eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \ done; \ - echo "Doing install-info in patch" ; \ - (cd patch && \ + echo "Doing clean in hello" ; \ + (cd hello && \ $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \ "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \ "RANLIB=$${RANLIB}" \ "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" \ - install-info) \ + clean) \ || exit 1 -.PHONY: maybe-install-info-perl install-info-perl -maybe-install-info-perl: +.PHONY: maybe-distclean-hello distclean-hello +maybe-distclean-hello: -install-info-perl: \ - configure-perl \ - info-perl - @[ -f ./perl/Makefile ] || exit 0; \ +distclean-hello: + @[ -f ./hello/Makefile ] || exit 0; \ r=`${PWD_COMMAND}`; export r; \ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ $(SET_LIB_PATH) \ for flag in $(EXTRA_HOST_FLAGS); do \ eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \ done; \ - echo "Doing install-info in perl" ; \ - (cd perl && \ + echo "Doing distclean in hello" ; \ + (cd hello && \ $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \ "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \ "RANLIB=$${RANLIB}" \ "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" \ - install-info) \ + distclean) \ || exit 1 -.PHONY: maybe-install-info-prms install-info-prms -maybe-install-info-prms: +.PHONY: maybe-maintainer-clean-hello maintainer-clean-hello +maybe-maintainer-clean-hello: -install-info-prms: \ - configure-prms \ - info-prms - @[ -f ./prms/Makefile ] || exit 0; \ +maintainer-clean-hello: + @[ -f ./hello/Makefile ] || exit 0; \ r=`${PWD_COMMAND}`; export r; \ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ $(SET_LIB_PATH) \ for flag in $(EXTRA_HOST_FLAGS); do \ eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \ done; \ - echo "Doing install-info in prms" ; \ - (cd prms && \ + echo "Doing maintainer-clean in hello" ; \ + (cd hello && \ $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \ "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \ "RANLIB=$${RANLIB}" \ "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" \ - install-info) \ + maintainer-clean) \ || exit 1 -.PHONY: maybe-install-info-rcs install-info-rcs -maybe-install-info-rcs: -install-info-rcs: \ - configure-rcs \ - info-rcs - @[ -f ./rcs/Makefile ] || exit 0; \ +.PHONY: configure-indent maybe-configure-indent +maybe-configure-indent: +configure-indent: + @test ! -f indent/Makefile || exit 0; \ + [ -d indent ] || mkdir indent; \ r=`${PWD_COMMAND}`; export r; \ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ - $(SET_LIB_PATH) \ - for flag in $(EXTRA_HOST_FLAGS); do \ - eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \ - done; \ - echo "Doing install-info in rcs" ; \ - (cd rcs && \ - $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \ - "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \ - "RANLIB=$${RANLIB}" \ - "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" \ - install-info) \ + CC="$(CC)"; export CC; \ + CFLAGS="$(CFLAGS)"; export CFLAGS; \ + CONFIG_SHELL="$(SHELL)"; export CONFIG_SHELL; \ + CXX="$(CXX)"; export CXX; \ + CXXFLAGS="$(CXXFLAGS)"; export CXXFLAGS; \ + AR="$(AR)"; export AR; \ + AS="$(AS)"; export AS; \ + CC_FOR_BUILD="$(CC_FOR_BUILD)"; export CC_FOR_BUILD; \ + DLLTOOL="$(DLLTOOL)"; export DLLTOOL; \ + LD="$(LD)"; export LD; \ + NM="$(NM)"; export NM; \ + RANLIB="$(RANLIB)"; export RANLIB; \ + WINDRES="$(WINDRES)"; export WINDRES; \ + OBJCOPY="$(OBJCOPY)"; export OBJCOPY; \ + OBJDUMP="$(OBJDUMP)"; export OBJDUMP; \ + echo Configuring in indent; \ + cd indent || exit 1; \ + case $(srcdir) in \ + \.) \ + srcdiroption="--srcdir=."; \ + libsrcdir=".";; \ + /* | [A-Za-z]:[\\/]*) \ + srcdiroption="--srcdir=$(srcdir)/indent"; \ + libsrcdir="$$s/indent";; \ + *) \ + srcdiroption="--srcdir=../$(srcdir)/indent"; \ + libsrcdir="$$s/indent";; \ + esac; \ + $(SHELL) $${libsrcdir}/configure \ + $(HOST_CONFIGARGS) $${srcdiroption} \ || exit 1 +.PHONY: all-indent maybe-all-indent +maybe-all-indent: +all-indent: configure-indent + @r=`${PWD_COMMAND}`; export r; \ + s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ + $(SET_LIB_PATH) \ + (cd indent && $(MAKE) $(FLAGS_TO_PASS) all) -.PHONY: maybe-install-info-readline install-info-readline -maybe-install-info-readline: +.PHONY: check-indent maybe-check-indent +maybe-check-indent: -install-info-readline: \ - configure-readline \ - info-readline - @[ -f ./readline/Makefile ] || exit 0; \ +check-indent: + @r=`${PWD_COMMAND}`; export r; \ + s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ + $(SET_LIB_PATH) \ + (cd indent && $(MAKE) $(FLAGS_TO_PASS) check) + + +.PHONY: install-indent maybe-install-indent +maybe-install-indent: + +install-indent: installdirs + @r=`${PWD_COMMAND}`; export r; \ + s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ + $(SET_LIB_PATH) \ + (cd indent && $(MAKE) $(FLAGS_TO_PASS) install) + + +# Other targets (info, dvi, etc.) + +.PHONY: maybe-info-indent info-indent +maybe-info-indent: + +info-indent: \ + configure-indent + @[ -f ./indent/Makefile ] || exit 0; \ r=`${PWD_COMMAND}`; export r; \ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ $(SET_LIB_PATH) \ for flag in $(EXTRA_HOST_FLAGS); do \ eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \ done; \ - echo "Doing install-info in readline" ; \ - (cd readline && \ + echo "Doing info in indent" ; \ + (cd indent && \ $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \ "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \ "RANLIB=$${RANLIB}" \ "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" \ - install-info) \ + info) \ || exit 1 -.PHONY: maybe-install-info-release install-info-release -maybe-install-info-release: +.PHONY: maybe-dvi-indent dvi-indent +maybe-dvi-indent: -install-info-release: \ - configure-release \ - info-release - @[ -f ./release/Makefile ] || exit 0; \ +dvi-indent: \ + configure-indent + @[ -f ./indent/Makefile ] || exit 0; \ r=`${PWD_COMMAND}`; export r; \ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ $(SET_LIB_PATH) \ for flag in $(EXTRA_HOST_FLAGS); do \ eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \ done; \ - echo "Doing install-info in release" ; \ - (cd release && \ + echo "Doing dvi in indent" ; \ + (cd indent && \ $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \ "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \ "RANLIB=$${RANLIB}" \ "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" \ - install-info) \ + dvi) \ || exit 1 -.PHONY: maybe-install-info-recode install-info-recode -maybe-install-info-recode: +.PHONY: maybe-TAGS-indent TAGS-indent +maybe-TAGS-indent: -install-info-recode: \ - configure-recode \ - info-recode - @[ -f ./recode/Makefile ] || exit 0; \ +TAGS-indent: \ + configure-indent + @[ -f ./indent/Makefile ] || exit 0; \ r=`${PWD_COMMAND}`; export r; \ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ $(SET_LIB_PATH) \ for flag in $(EXTRA_HOST_FLAGS); do \ eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \ done; \ - echo "Doing install-info in recode" ; \ - (cd recode && \ + echo "Doing TAGS in indent" ; \ + (cd indent && \ $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \ "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \ "RANLIB=$${RANLIB}" \ "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" \ - install-info) \ + TAGS) \ || exit 1 -.PHONY: maybe-install-info-sed install-info-sed -maybe-install-info-sed: +.PHONY: maybe-install-info-indent install-info-indent +maybe-install-info-indent: -install-info-sed: \ - configure-sed \ - info-sed - @[ -f ./sed/Makefile ] || exit 0; \ +install-info-indent: \ + configure-indent \ + info-indent + @[ -f ./indent/Makefile ] || exit 0; \ r=`${PWD_COMMAND}`; export r; \ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ $(SET_LIB_PATH) \ for flag in $(EXTRA_HOST_FLAGS); do \ eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \ done; \ - echo "Doing install-info in sed" ; \ - (cd sed && \ + echo "Doing install-info in indent" ; \ + (cd indent && \ $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \ "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \ "RANLIB=$${RANLIB}" \ @@ -7554,205 +9026,263 @@ install-info-sed: \ || exit 1 -.PHONY: maybe-install-info-send-pr install-info-send-pr -maybe-install-info-send-pr: +.PHONY: maybe-installcheck-indent installcheck-indent +maybe-installcheck-indent: -install-info-send-pr: \ - configure-send-pr \ - info-send-pr - @[ -f ./send-pr/Makefile ] || exit 0; \ +installcheck-indent: \ + configure-indent + @[ -f ./indent/Makefile ] || exit 0; \ r=`${PWD_COMMAND}`; export r; \ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ $(SET_LIB_PATH) \ for flag in $(EXTRA_HOST_FLAGS); do \ eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \ done; \ - echo "Doing install-info in send-pr" ; \ - (cd send-pr && \ + echo "Doing installcheck in indent" ; \ + (cd indent && \ $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \ "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \ "RANLIB=$${RANLIB}" \ "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" \ - install-info) \ + installcheck) \ || exit 1 -.PHONY: maybe-install-info-shellutils install-info-shellutils -maybe-install-info-shellutils: +.PHONY: maybe-mostlyclean-indent mostlyclean-indent +maybe-mostlyclean-indent: -install-info-shellutils: \ - configure-shellutils \ - info-shellutils - @[ -f ./shellutils/Makefile ] || exit 0; \ +mostlyclean-indent: + @[ -f ./indent/Makefile ] || exit 0; \ r=`${PWD_COMMAND}`; export r; \ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ $(SET_LIB_PATH) \ for flag in $(EXTRA_HOST_FLAGS); do \ eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \ done; \ - echo "Doing install-info in shellutils" ; \ - (cd shellutils && \ + echo "Doing mostlyclean in indent" ; \ + (cd indent && \ $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \ "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \ "RANLIB=$${RANLIB}" \ "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" \ - install-info) \ + mostlyclean) \ || exit 1 -.PHONY: maybe-install-info-sid install-info-sid -maybe-install-info-sid: +.PHONY: maybe-clean-indent clean-indent +maybe-clean-indent: -install-info-sid: \ - configure-sid \ - info-sid - @[ -f ./sid/Makefile ] || exit 0; \ +clean-indent: + @[ -f ./indent/Makefile ] || exit 0; \ r=`${PWD_COMMAND}`; export r; \ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ $(SET_LIB_PATH) \ for flag in $(EXTRA_HOST_FLAGS); do \ eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \ done; \ - echo "Doing install-info in sid" ; \ - (cd sid && \ + echo "Doing clean in indent" ; \ + (cd indent && \ $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \ "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \ "RANLIB=$${RANLIB}" \ "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" \ - install-info) \ + clean) \ || exit 1 -.PHONY: maybe-install-info-sim install-info-sim -maybe-install-info-sim: +.PHONY: maybe-distclean-indent distclean-indent +maybe-distclean-indent: -install-info-sim: \ - configure-sim \ - info-sim - @[ -f ./sim/Makefile ] || exit 0; \ +distclean-indent: + @[ -f ./indent/Makefile ] || exit 0; \ r=`${PWD_COMMAND}`; export r; \ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ $(SET_LIB_PATH) \ for flag in $(EXTRA_HOST_FLAGS); do \ eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \ done; \ - echo "Doing install-info in sim" ; \ - (cd sim && \ + echo "Doing distclean in indent" ; \ + (cd indent && \ $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \ "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \ "RANLIB=$${RANLIB}" \ "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" \ - install-info) \ + distclean) \ || exit 1 -.PHONY: maybe-install-info-tar install-info-tar -maybe-install-info-tar: +.PHONY: maybe-maintainer-clean-indent maintainer-clean-indent +maybe-maintainer-clean-indent: -install-info-tar: \ - configure-tar \ - info-tar - @[ -f ./tar/Makefile ] || exit 0; \ +maintainer-clean-indent: + @[ -f ./indent/Makefile ] || exit 0; \ r=`${PWD_COMMAND}`; export r; \ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ $(SET_LIB_PATH) \ for flag in $(EXTRA_HOST_FLAGS); do \ eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \ done; \ - echo "Doing install-info in tar" ; \ - (cd tar && \ + echo "Doing maintainer-clean in indent" ; \ + (cd indent && \ $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \ "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \ "RANLIB=$${RANLIB}" \ "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" \ - install-info) \ + maintainer-clean) \ || exit 1 -.PHONY: maybe-install-info-texinfo install-info-texinfo -maybe-install-info-texinfo: -install-info-texinfo: \ - configure-texinfo \ - info-texinfo - @[ -f ./texinfo/Makefile ] || exit 0; \ +.PHONY: configure-intl maybe-configure-intl +maybe-configure-intl: +configure-intl: + @test ! -f intl/Makefile || exit 0; \ + [ -d intl ] || mkdir intl; \ + r=`${PWD_COMMAND}`; export r; \ + s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ + CC="$(CC)"; export CC; \ + CFLAGS="$(CFLAGS)"; export CFLAGS; \ + CONFIG_SHELL="$(SHELL)"; export CONFIG_SHELL; \ + CXX="$(CXX)"; export CXX; \ + CXXFLAGS="$(CXXFLAGS)"; export CXXFLAGS; \ + AR="$(AR)"; export AR; \ + AS="$(AS)"; export AS; \ + CC_FOR_BUILD="$(CC_FOR_BUILD)"; export CC_FOR_BUILD; \ + DLLTOOL="$(DLLTOOL)"; export DLLTOOL; \ + LD="$(LD)"; export LD; \ + NM="$(NM)"; export NM; \ + RANLIB="$(RANLIB)"; export RANLIB; \ + WINDRES="$(WINDRES)"; export WINDRES; \ + OBJCOPY="$(OBJCOPY)"; export OBJCOPY; \ + OBJDUMP="$(OBJDUMP)"; export OBJDUMP; \ + echo Configuring in intl; \ + cd intl || exit 1; \ + case $(srcdir) in \ + \.) \ + srcdiroption="--srcdir=."; \ + libsrcdir=".";; \ + /* | [A-Za-z]:[\\/]*) \ + srcdiroption="--srcdir=$(srcdir)/intl"; \ + libsrcdir="$$s/intl";; \ + *) \ + srcdiroption="--srcdir=../$(srcdir)/intl"; \ + libsrcdir="$$s/intl";; \ + esac; \ + $(SHELL) $${libsrcdir}/configure \ + $(HOST_CONFIGARGS) $${srcdiroption} \ + || exit 1 + +.PHONY: all-intl maybe-all-intl +maybe-all-intl: +all-intl: configure-intl + @r=`${PWD_COMMAND}`; export r; \ + s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ + $(SET_LIB_PATH) \ + (cd intl && $(MAKE) $(FLAGS_TO_PASS) all) + +.PHONY: check-intl maybe-check-intl +maybe-check-intl: + +check-intl: + @r=`${PWD_COMMAND}`; export r; \ + s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ + $(SET_LIB_PATH) \ + (cd intl && $(MAKE) $(FLAGS_TO_PASS) check) + + +.PHONY: install-intl maybe-install-intl +maybe-install-intl: + +install-intl: installdirs + @r=`${PWD_COMMAND}`; export r; \ + s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ + $(SET_LIB_PATH) \ + (cd intl && $(MAKE) $(FLAGS_TO_PASS) install) + + +# Other targets (info, dvi, etc.) + +.PHONY: maybe-info-intl info-intl +maybe-info-intl: + +info-intl: \ + configure-intl + @[ -f ./intl/Makefile ] || exit 0; \ r=`${PWD_COMMAND}`; export r; \ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ $(SET_LIB_PATH) \ for flag in $(EXTRA_HOST_FLAGS); do \ eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \ done; \ - echo "Doing install-info in texinfo" ; \ - (cd texinfo && \ + echo "Doing info in intl" ; \ + (cd intl && \ $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \ "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \ "RANLIB=$${RANLIB}" \ "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" \ - install-info) \ + info) \ || exit 1 -.PHONY: maybe-install-info-textutils install-info-textutils -maybe-install-info-textutils: +.PHONY: maybe-dvi-intl dvi-intl +maybe-dvi-intl: -install-info-textutils: \ - configure-textutils \ - info-textutils - @[ -f ./textutils/Makefile ] || exit 0; \ +dvi-intl: \ + configure-intl + @[ -f ./intl/Makefile ] || exit 0; \ r=`${PWD_COMMAND}`; export r; \ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ $(SET_LIB_PATH) \ for flag in $(EXTRA_HOST_FLAGS); do \ eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \ done; \ - echo "Doing install-info in textutils" ; \ - (cd textutils && \ + echo "Doing dvi in intl" ; \ + (cd intl && \ $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \ "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \ "RANLIB=$${RANLIB}" \ "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" \ - install-info) \ + dvi) \ || exit 1 -.PHONY: maybe-install-info-time install-info-time -maybe-install-info-time: +.PHONY: maybe-TAGS-intl TAGS-intl +maybe-TAGS-intl: -install-info-time: \ - configure-time \ - info-time - @[ -f ./time/Makefile ] || exit 0; \ +TAGS-intl: \ + configure-intl + @[ -f ./intl/Makefile ] || exit 0; \ r=`${PWD_COMMAND}`; export r; \ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ $(SET_LIB_PATH) \ for flag in $(EXTRA_HOST_FLAGS); do \ eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \ done; \ - echo "Doing install-info in time" ; \ - (cd time && \ + echo "Doing TAGS in intl" ; \ + (cd intl && \ $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \ "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \ "RANLIB=$${RANLIB}" \ "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" \ - install-info) \ + TAGS) \ || exit 1 -.PHONY: maybe-install-info-uudecode install-info-uudecode -maybe-install-info-uudecode: +.PHONY: maybe-install-info-intl install-info-intl +maybe-install-info-intl: -install-info-uudecode: \ - configure-uudecode \ - info-uudecode - @[ -f ./uudecode/Makefile ] || exit 0; \ +install-info-intl: \ + configure-intl \ + info-intl + @[ -f ./intl/Makefile ] || exit 0; \ r=`${PWD_COMMAND}`; export r; \ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ $(SET_LIB_PATH) \ for flag in $(EXTRA_HOST_FLAGS); do \ eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \ done; \ - echo "Doing install-info in uudecode" ; \ - (cd uudecode && \ + echo "Doing install-info in intl" ; \ + (cd intl && \ $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \ "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \ "RANLIB=$${RANLIB}" \ @@ -7761,205 +9291,263 @@ install-info-uudecode: \ || exit 1 -.PHONY: maybe-install-info-wdiff install-info-wdiff -maybe-install-info-wdiff: +.PHONY: maybe-installcheck-intl installcheck-intl +maybe-installcheck-intl: -install-info-wdiff: \ - configure-wdiff \ - info-wdiff - @[ -f ./wdiff/Makefile ] || exit 0; \ +installcheck-intl: \ + configure-intl + @[ -f ./intl/Makefile ] || exit 0; \ r=`${PWD_COMMAND}`; export r; \ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ $(SET_LIB_PATH) \ for flag in $(EXTRA_HOST_FLAGS); do \ eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \ done; \ - echo "Doing install-info in wdiff" ; \ - (cd wdiff && \ + echo "Doing installcheck in intl" ; \ + (cd intl && \ $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \ "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \ "RANLIB=$${RANLIB}" \ "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" \ - install-info) \ + installcheck) \ || exit 1 -.PHONY: maybe-install-info-zip install-info-zip -maybe-install-info-zip: +.PHONY: maybe-mostlyclean-intl mostlyclean-intl +maybe-mostlyclean-intl: -install-info-zip: \ - configure-zip \ - info-zip - @[ -f ./zip/Makefile ] || exit 0; \ +mostlyclean-intl: + @[ -f ./intl/Makefile ] || exit 0; \ r=`${PWD_COMMAND}`; export r; \ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ $(SET_LIB_PATH) \ for flag in $(EXTRA_HOST_FLAGS); do \ eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \ done; \ - echo "Doing install-info in zip" ; \ - (cd zip && \ + echo "Doing mostlyclean in intl" ; \ + (cd intl && \ $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \ "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \ "RANLIB=$${RANLIB}" \ "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" \ - install-info) \ + mostlyclean) \ || exit 1 -.PHONY: maybe-install-info-zlib install-info-zlib -maybe-install-info-zlib: +.PHONY: maybe-clean-intl clean-intl +maybe-clean-intl: -install-info-zlib: \ - configure-zlib \ - info-zlib - @[ -f ./zlib/Makefile ] || exit 0; \ +clean-intl: + @[ -f ./intl/Makefile ] || exit 0; \ r=`${PWD_COMMAND}`; export r; \ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ $(SET_LIB_PATH) \ for flag in $(EXTRA_HOST_FLAGS); do \ eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \ done; \ - echo "Doing install-info in zlib" ; \ - (cd zlib && \ + echo "Doing clean in intl" ; \ + (cd intl && \ $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \ "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \ "RANLIB=$${RANLIB}" \ "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" \ - install-info) \ + clean) \ || exit 1 -.PHONY: maybe-install-info-gdb install-info-gdb -maybe-install-info-gdb: +.PHONY: maybe-distclean-intl distclean-intl +maybe-distclean-intl: -install-info-gdb: \ - configure-gdb \ - info-gdb - @[ -f ./gdb/Makefile ] || exit 0; \ +distclean-intl: + @[ -f ./intl/Makefile ] || exit 0; \ r=`${PWD_COMMAND}`; export r; \ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ $(SET_LIB_PATH) \ for flag in $(EXTRA_HOST_FLAGS); do \ eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \ done; \ - echo "Doing install-info in gdb" ; \ - (cd gdb && \ + echo "Doing distclean in intl" ; \ + (cd intl && \ $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \ "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \ "RANLIB=$${RANLIB}" \ "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" \ - install-info) \ + distclean) \ || exit 1 -.PHONY: maybe-install-info-expect install-info-expect -maybe-install-info-expect: +.PHONY: maybe-maintainer-clean-intl maintainer-clean-intl +maybe-maintainer-clean-intl: -install-info-expect: \ - configure-expect \ - info-expect - @[ -f ./expect/Makefile ] || exit 0; \ +maintainer-clean-intl: + @[ -f ./intl/Makefile ] || exit 0; \ r=`${PWD_COMMAND}`; export r; \ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ $(SET_LIB_PATH) \ for flag in $(EXTRA_HOST_FLAGS); do \ eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \ done; \ - echo "Doing install-info in expect" ; \ - (cd expect && \ + echo "Doing maintainer-clean in intl" ; \ + (cd intl && \ $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \ "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \ "RANLIB=$${RANLIB}" \ "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" \ - install-info) \ + maintainer-clean) \ || exit 1 -.PHONY: maybe-install-info-guile install-info-guile -maybe-install-info-guile: -install-info-guile: \ - configure-guile \ - info-guile - @[ -f ./guile/Makefile ] || exit 0; \ +.PHONY: configure-tcl maybe-configure-tcl +maybe-configure-tcl: +configure-tcl: + @test ! -f tcl/Makefile || exit 0; \ + [ -d tcl ] || mkdir tcl; \ + r=`${PWD_COMMAND}`; export r; \ + s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ + CC="$(CC)"; export CC; \ + CFLAGS="$(CFLAGS)"; export CFLAGS; \ + CONFIG_SHELL="$(SHELL)"; export CONFIG_SHELL; \ + CXX="$(CXX)"; export CXX; \ + CXXFLAGS="$(CXXFLAGS)"; export CXXFLAGS; \ + AR="$(AR)"; export AR; \ + AS="$(AS)"; export AS; \ + CC_FOR_BUILD="$(CC_FOR_BUILD)"; export CC_FOR_BUILD; \ + DLLTOOL="$(DLLTOOL)"; export DLLTOOL; \ + LD="$(LD)"; export LD; \ + NM="$(NM)"; export NM; \ + RANLIB="$(RANLIB)"; export RANLIB; \ + WINDRES="$(WINDRES)"; export WINDRES; \ + OBJCOPY="$(OBJCOPY)"; export OBJCOPY; \ + OBJDUMP="$(OBJDUMP)"; export OBJDUMP; \ + echo Configuring in tcl; \ + cd tcl || exit 1; \ + case $(srcdir) in \ + \.) \ + srcdiroption="--srcdir=."; \ + libsrcdir=".";; \ + /* | [A-Za-z]:[\\/]*) \ + srcdiroption="--srcdir=$(srcdir)/tcl"; \ + libsrcdir="$$s/tcl";; \ + *) \ + srcdiroption="--srcdir=../$(srcdir)/tcl"; \ + libsrcdir="$$s/tcl";; \ + esac; \ + $(SHELL) $${libsrcdir}/configure \ + $(HOST_CONFIGARGS) $${srcdiroption} \ + || exit 1 + +.PHONY: all-tcl maybe-all-tcl +maybe-all-tcl: +all-tcl: configure-tcl + @r=`${PWD_COMMAND}`; export r; \ + s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ + $(SET_LIB_PATH) \ + (cd tcl && $(MAKE) $(FLAGS_TO_PASS) all) + +.PHONY: check-tcl maybe-check-tcl +maybe-check-tcl: + +check-tcl: + @r=`${PWD_COMMAND}`; export r; \ + s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ + $(SET_LIB_PATH) \ + (cd tcl && $(MAKE) $(FLAGS_TO_PASS) check) + + +.PHONY: install-tcl maybe-install-tcl +maybe-install-tcl: + +install-tcl: installdirs + @r=`${PWD_COMMAND}`; export r; \ + s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ + $(SET_LIB_PATH) \ + (cd tcl && $(MAKE) $(FLAGS_TO_PASS) install) + + +# Other targets (info, dvi, etc.) + +.PHONY: maybe-info-tcl info-tcl +maybe-info-tcl: + +info-tcl: \ + configure-tcl + @[ -f ./tcl/Makefile ] || exit 0; \ r=`${PWD_COMMAND}`; export r; \ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ $(SET_LIB_PATH) \ for flag in $(EXTRA_HOST_FLAGS); do \ eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \ done; \ - echo "Doing install-info in guile" ; \ - (cd guile && \ + echo "Doing info in tcl" ; \ + (cd tcl && \ $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \ "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \ "RANLIB=$${RANLIB}" \ "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" \ - install-info) \ + info) \ || exit 1 -.PHONY: maybe-install-info-tk install-info-tk -maybe-install-info-tk: +.PHONY: maybe-dvi-tcl dvi-tcl +maybe-dvi-tcl: -install-info-tk: \ - configure-tk \ - info-tk - @[ -f ./tk/Makefile ] || exit 0; \ +dvi-tcl: \ + configure-tcl + @[ -f ./tcl/Makefile ] || exit 0; \ r=`${PWD_COMMAND}`; export r; \ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ $(SET_LIB_PATH) \ for flag in $(EXTRA_HOST_FLAGS); do \ eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \ done; \ - echo "Doing install-info in tk" ; \ - (cd tk && \ + echo "Doing dvi in tcl" ; \ + (cd tcl && \ $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \ "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \ "RANLIB=$${RANLIB}" \ "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" \ - install-info) \ + dvi) \ || exit 1 -.PHONY: maybe-install-info-tix install-info-tix -maybe-install-info-tix: +.PHONY: maybe-TAGS-tcl TAGS-tcl +maybe-TAGS-tcl: -install-info-tix: \ - configure-tix \ - info-tix - @[ -f ./tix/Makefile ] || exit 0; \ +TAGS-tcl: \ + configure-tcl + @[ -f ./tcl/Makefile ] || exit 0; \ r=`${PWD_COMMAND}`; export r; \ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ $(SET_LIB_PATH) \ for flag in $(EXTRA_HOST_FLAGS); do \ eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \ done; \ - echo "Doing install-info in tix" ; \ - (cd tix && \ + echo "Doing TAGS in tcl" ; \ + (cd tcl && \ $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \ "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \ "RANLIB=$${RANLIB}" \ "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" \ - install-info) \ + TAGS) \ || exit 1 -.PHONY: maybe-install-info-libtermcap install-info-libtermcap -maybe-install-info-libtermcap: +.PHONY: maybe-install-info-tcl install-info-tcl +maybe-install-info-tcl: -install-info-libtermcap: \ - configure-libtermcap \ - info-libtermcap - @[ -f ./libtermcap/Makefile ] || exit 0; \ +install-info-tcl: \ + configure-tcl \ + info-tcl + @[ -f ./tcl/Makefile ] || exit 0; \ r=`${PWD_COMMAND}`; export r; \ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ $(SET_LIB_PATH) \ for flag in $(EXTRA_HOST_FLAGS); do \ eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \ done; \ - echo "Doing install-info in libtermcap" ; \ - (cd libtermcap && \ + echo "Doing install-info in tcl" ; \ + (cd tcl && \ $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \ "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \ "RANLIB=$${RANLIB}" \ @@ -7968,254 +9556,249 @@ install-info-libtermcap: \ || exit 1 -.PHONY: maybe-install-info-utils install-info-utils -maybe-install-info-utils: +.PHONY: maybe-installcheck-tcl installcheck-tcl +maybe-installcheck-tcl: -install-info-utils: \ - configure-utils \ - info-utils - @[ -f ./utils/Makefile ] || exit 0; \ +installcheck-tcl: \ + configure-tcl + @[ -f ./tcl/Makefile ] || exit 0; \ r=`${PWD_COMMAND}`; export r; \ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ $(SET_LIB_PATH) \ for flag in $(EXTRA_HOST_FLAGS); do \ eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \ done; \ - echo "Doing install-info in utils" ; \ - (cd utils && \ + echo "Doing installcheck in tcl" ; \ + (cd tcl && \ $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \ "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \ "RANLIB=$${RANLIB}" \ "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" \ - install-info) \ + installcheck) \ || exit 1 +.PHONY: maybe-mostlyclean-tcl mostlyclean-tcl +maybe-mostlyclean-tcl: -# Target modules. +# tcl doesn't support mostlyclean. +mostlyclean-tcl: -.PHONY: maybe-install-info-target-libstdc++-v3 install-info-target-libstdc++-v3 -maybe-install-info-target-libstdc++-v3: -install-info-target-libstdc++-v3: \ - configure-target-libstdc++-v3 \ - info-target-libstdc++-v3 - @[ -f $(TARGET_SUBDIR)/libstdc++-v3/Makefile ] || exit 0 ; \ +.PHONY: maybe-clean-tcl clean-tcl +maybe-clean-tcl: + +clean-tcl: + @[ -f ./tcl/Makefile ] || exit 0; \ r=`${PWD_COMMAND}`; export r; \ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ $(SET_LIB_PATH) \ - echo "Doing install-info in $(TARGET_SUBDIR)/libstdc++-v3" ; \ - for flag in $(EXTRA_TARGET_FLAGS); do \ + for flag in $(EXTRA_HOST_FLAGS); do \ eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \ done; \ - (cd $(TARGET_SUBDIR)/libstdc++-v3 && \ + echo "Doing clean in tcl" ; \ + (cd tcl && \ $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \ "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \ "RANLIB=$${RANLIB}" \ "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" \ - install-info) \ + clean) \ || exit 1 -.PHONY: maybe-install-info-target-newlib install-info-target-newlib -maybe-install-info-target-newlib: +.PHONY: maybe-distclean-tcl distclean-tcl +maybe-distclean-tcl: -install-info-target-newlib: \ - configure-target-newlib \ - info-target-newlib - @[ -f $(TARGET_SUBDIR)/newlib/Makefile ] || exit 0 ; \ +distclean-tcl: + @[ -f ./tcl/Makefile ] || exit 0; \ r=`${PWD_COMMAND}`; export r; \ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ $(SET_LIB_PATH) \ - echo "Doing install-info in $(TARGET_SUBDIR)/newlib" ; \ - for flag in $(EXTRA_TARGET_FLAGS); do \ + for flag in $(EXTRA_HOST_FLAGS); do \ eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \ done; \ - (cd $(TARGET_SUBDIR)/newlib && \ + echo "Doing distclean in tcl" ; \ + (cd tcl && \ $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \ "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \ "RANLIB=$${RANLIB}" \ "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" \ - install-info) \ + distclean) \ || exit 1 -.PHONY: maybe-install-info-target-libf2c install-info-target-libf2c -maybe-install-info-target-libf2c: +.PHONY: maybe-maintainer-clean-tcl maintainer-clean-tcl +maybe-maintainer-clean-tcl: -install-info-target-libf2c: \ - configure-target-libf2c \ - info-target-libf2c - @[ -f $(TARGET_SUBDIR)/libf2c/Makefile ] || exit 0 ; \ +maintainer-clean-tcl: + @[ -f ./tcl/Makefile ] || exit 0; \ r=`${PWD_COMMAND}`; export r; \ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ $(SET_LIB_PATH) \ - echo "Doing install-info in $(TARGET_SUBDIR)/libf2c" ; \ - for flag in $(EXTRA_TARGET_FLAGS); do \ + for flag in $(EXTRA_HOST_FLAGS); do \ eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \ done; \ - (cd $(TARGET_SUBDIR)/libf2c && \ + echo "Doing maintainer-clean in tcl" ; \ + (cd tcl && \ $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \ "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \ "RANLIB=$${RANLIB}" \ "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" \ - install-info) \ + maintainer-clean) \ || exit 1 -.PHONY: maybe-install-info-target-libobjc install-info-target-libobjc -maybe-install-info-target-libobjc: -install-info-target-libobjc: \ - configure-target-libobjc \ - info-target-libobjc - @[ -f $(TARGET_SUBDIR)/libobjc/Makefile ] || exit 0 ; \ +.PHONY: configure-itcl maybe-configure-itcl +maybe-configure-itcl: +configure-itcl: + @test ! -f itcl/Makefile || exit 0; \ + [ -d itcl ] || mkdir itcl; \ r=`${PWD_COMMAND}`; export r; \ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ - $(SET_LIB_PATH) \ - echo "Doing install-info in $(TARGET_SUBDIR)/libobjc" ; \ - for flag in $(EXTRA_TARGET_FLAGS); do \ - eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \ - done; \ - (cd $(TARGET_SUBDIR)/libobjc && \ - $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \ - "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \ - "RANLIB=$${RANLIB}" \ - "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" \ - install-info) \ + CC="$(CC)"; export CC; \ + CFLAGS="$(CFLAGS)"; export CFLAGS; \ + CONFIG_SHELL="$(SHELL)"; export CONFIG_SHELL; \ + CXX="$(CXX)"; export CXX; \ + CXXFLAGS="$(CXXFLAGS)"; export CXXFLAGS; \ + AR="$(AR)"; export AR; \ + AS="$(AS)"; export AS; \ + CC_FOR_BUILD="$(CC_FOR_BUILD)"; export CC_FOR_BUILD; \ + DLLTOOL="$(DLLTOOL)"; export DLLTOOL; \ + LD="$(LD)"; export LD; \ + NM="$(NM)"; export NM; \ + RANLIB="$(RANLIB)"; export RANLIB; \ + WINDRES="$(WINDRES)"; export WINDRES; \ + OBJCOPY="$(OBJCOPY)"; export OBJCOPY; \ + OBJDUMP="$(OBJDUMP)"; export OBJDUMP; \ + echo Configuring in itcl; \ + cd itcl || exit 1; \ + case $(srcdir) in \ + \.) \ + srcdiroption="--srcdir=."; \ + libsrcdir=".";; \ + /* | [A-Za-z]:[\\/]*) \ + srcdiroption="--srcdir=$(srcdir)/itcl"; \ + libsrcdir="$$s/itcl";; \ + *) \ + srcdiroption="--srcdir=../$(srcdir)/itcl"; \ + libsrcdir="$$s/itcl";; \ + esac; \ + $(SHELL) $${libsrcdir}/configure \ + $(HOST_CONFIGARGS) $${srcdiroption} \ || exit 1 +.PHONY: all-itcl maybe-all-itcl +maybe-all-itcl: +all-itcl: configure-itcl + @r=`${PWD_COMMAND}`; export r; \ + s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ + $(SET_LIB_PATH) \ + (cd itcl && $(MAKE) $(FLAGS_TO_PASS) all) -.PHONY: maybe-install-info-target-libtermcap install-info-target-libtermcap -maybe-install-info-target-libtermcap: +.PHONY: check-itcl maybe-check-itcl +maybe-check-itcl: -install-info-target-libtermcap: \ - configure-target-libtermcap \ - info-target-libtermcap - @[ -f $(TARGET_SUBDIR)/libtermcap/Makefile ] || exit 0 ; \ - r=`${PWD_COMMAND}`; export r; \ +check-itcl: + @r=`${PWD_COMMAND}`; export r; \ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ $(SET_LIB_PATH) \ - echo "Doing install-info in $(TARGET_SUBDIR)/libtermcap" ; \ - for flag in $(EXTRA_TARGET_FLAGS); do \ - eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \ - done; \ - (cd $(TARGET_SUBDIR)/libtermcap && \ - $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \ - "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \ - "RANLIB=$${RANLIB}" \ - "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" \ - install-info) \ - || exit 1 + (cd itcl && $(MAKE) $(FLAGS_TO_PASS) check) -.PHONY: maybe-install-info-target-winsup install-info-target-winsup -maybe-install-info-target-winsup: +.PHONY: install-itcl maybe-install-itcl +maybe-install-itcl: -install-info-target-winsup: \ - configure-target-winsup \ - info-target-winsup - @[ -f $(TARGET_SUBDIR)/winsup/Makefile ] || exit 0 ; \ - r=`${PWD_COMMAND}`; export r; \ +install-itcl: installdirs + @r=`${PWD_COMMAND}`; export r; \ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ $(SET_LIB_PATH) \ - echo "Doing install-info in $(TARGET_SUBDIR)/winsup" ; \ - for flag in $(EXTRA_TARGET_FLAGS); do \ - eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \ - done; \ - (cd $(TARGET_SUBDIR)/winsup && \ - $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \ - "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \ - "RANLIB=$${RANLIB}" \ - "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" \ - install-info) \ - || exit 1 + (cd itcl && $(MAKE) $(FLAGS_TO_PASS) install) -.PHONY: maybe-install-info-target-libgloss install-info-target-libgloss -maybe-install-info-target-libgloss: +# Other targets (info, dvi, etc.) -install-info-target-libgloss: \ - configure-target-libgloss \ - info-target-libgloss - @[ -f $(TARGET_SUBDIR)/libgloss/Makefile ] || exit 0 ; \ +.PHONY: maybe-info-itcl info-itcl +maybe-info-itcl: + +info-itcl: \ + configure-itcl + @[ -f ./itcl/Makefile ] || exit 0; \ r=`${PWD_COMMAND}`; export r; \ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ $(SET_LIB_PATH) \ - echo "Doing install-info in $(TARGET_SUBDIR)/libgloss" ; \ - for flag in $(EXTRA_TARGET_FLAGS); do \ + for flag in $(EXTRA_HOST_FLAGS); do \ eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \ done; \ - (cd $(TARGET_SUBDIR)/libgloss && \ + echo "Doing info in itcl" ; \ + (cd itcl && \ $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \ "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \ "RANLIB=$${RANLIB}" \ "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" \ - install-info) \ + info) \ || exit 1 -.PHONY: maybe-install-info-target-libiberty install-info-target-libiberty -maybe-install-info-target-libiberty: +.PHONY: maybe-dvi-itcl dvi-itcl +maybe-dvi-itcl: -install-info-target-libiberty: \ - configure-target-libiberty \ - info-target-libiberty - @[ -f $(TARGET_SUBDIR)/libiberty/Makefile ] || exit 0 ; \ +dvi-itcl: \ + configure-itcl + @[ -f ./itcl/Makefile ] || exit 0; \ r=`${PWD_COMMAND}`; export r; \ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ $(SET_LIB_PATH) \ - echo "Doing install-info in $(TARGET_SUBDIR)/libiberty" ; \ - for flag in $(EXTRA_TARGET_FLAGS); do \ + for flag in $(EXTRA_HOST_FLAGS); do \ eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \ done; \ - (cd $(TARGET_SUBDIR)/libiberty && \ + echo "Doing dvi in itcl" ; \ + (cd itcl && \ $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \ "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \ "RANLIB=$${RANLIB}" \ "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" \ - install-info) \ + dvi) \ || exit 1 -.PHONY: maybe-install-info-target-gperf install-info-target-gperf -maybe-install-info-target-gperf: +.PHONY: maybe-TAGS-itcl TAGS-itcl +maybe-TAGS-itcl: -install-info-target-gperf: \ - configure-target-gperf \ - info-target-gperf - @[ -f $(TARGET_SUBDIR)/gperf/Makefile ] || exit 0 ; \ +TAGS-itcl: \ + configure-itcl + @[ -f ./itcl/Makefile ] || exit 0; \ r=`${PWD_COMMAND}`; export r; \ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ $(SET_LIB_PATH) \ - echo "Doing install-info in $(TARGET_SUBDIR)/gperf" ; \ - for flag in $(EXTRA_TARGET_FLAGS); do \ + for flag in $(EXTRA_HOST_FLAGS); do \ eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \ done; \ - (cd $(TARGET_SUBDIR)/gperf && \ + echo "Doing TAGS in itcl" ; \ + (cd itcl && \ $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \ "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \ "RANLIB=$${RANLIB}" \ "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" \ - install-info) \ + TAGS) \ || exit 1 -.PHONY: maybe-install-info-target-examples install-info-target-examples -maybe-install-info-target-examples: +.PHONY: maybe-install-info-itcl install-info-itcl +maybe-install-info-itcl: -install-info-target-examples: \ - configure-target-examples \ - info-target-examples - @[ -f $(TARGET_SUBDIR)/examples/Makefile ] || exit 0 ; \ +install-info-itcl: \ + configure-itcl \ + info-itcl + @[ -f ./itcl/Makefile ] || exit 0; \ r=`${PWD_COMMAND}`; export r; \ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ $(SET_LIB_PATH) \ - echo "Doing install-info in $(TARGET_SUBDIR)/examples" ; \ - for flag in $(EXTRA_TARGET_FLAGS); do \ + for flag in $(EXTRA_HOST_FLAGS); do \ eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \ done; \ - (cd $(TARGET_SUBDIR)/examples && \ + echo "Doing install-info in itcl" ; \ + (cd itcl && \ $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \ "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \ "RANLIB=$${RANLIB}" \ @@ -8224,361 +9807,285 @@ install-info-target-examples: \ || exit 1 -.PHONY: maybe-install-info-target-libffi install-info-target-libffi -maybe-install-info-target-libffi: +.PHONY: maybe-installcheck-itcl installcheck-itcl +maybe-installcheck-itcl: -install-info-target-libffi: \ - configure-target-libffi \ - info-target-libffi - @[ -f $(TARGET_SUBDIR)/libffi/Makefile ] || exit 0 ; \ +installcheck-itcl: \ + configure-itcl + @[ -f ./itcl/Makefile ] || exit 0; \ r=`${PWD_COMMAND}`; export r; \ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ $(SET_LIB_PATH) \ - echo "Doing install-info in $(TARGET_SUBDIR)/libffi" ; \ - for flag in $(EXTRA_TARGET_FLAGS); do \ + for flag in $(EXTRA_HOST_FLAGS); do \ eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \ done; \ - (cd $(TARGET_SUBDIR)/libffi && \ + echo "Doing installcheck in itcl" ; \ + (cd itcl && \ $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \ "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \ "RANLIB=$${RANLIB}" \ "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" \ - install-info) \ + installcheck) \ || exit 1 -.PHONY: maybe-install-info-target-libjava install-info-target-libjava -maybe-install-info-target-libjava: +.PHONY: maybe-mostlyclean-itcl mostlyclean-itcl +maybe-mostlyclean-itcl: -install-info-target-libjava: \ - configure-target-libjava \ - info-target-libjava - @[ -f $(TARGET_SUBDIR)/libjava/Makefile ] || exit 0 ; \ +mostlyclean-itcl: + @[ -f ./itcl/Makefile ] || exit 0; \ r=`${PWD_COMMAND}`; export r; \ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ $(SET_LIB_PATH) \ - echo "Doing install-info in $(TARGET_SUBDIR)/libjava" ; \ - for flag in $(EXTRA_TARGET_FLAGS); do \ + for flag in $(EXTRA_HOST_FLAGS); do \ eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \ done; \ - (cd $(TARGET_SUBDIR)/libjava && \ + echo "Doing mostlyclean in itcl" ; \ + (cd itcl && \ $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \ "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \ "RANLIB=$${RANLIB}" \ "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" \ - install-info) \ + mostlyclean) \ || exit 1 -.PHONY: maybe-install-info-target-zlib install-info-target-zlib -maybe-install-info-target-zlib: +.PHONY: maybe-clean-itcl clean-itcl +maybe-clean-itcl: -install-info-target-zlib: \ - configure-target-zlib \ - info-target-zlib - @[ -f $(TARGET_SUBDIR)/zlib/Makefile ] || exit 0 ; \ +clean-itcl: + @[ -f ./itcl/Makefile ] || exit 0; \ r=`${PWD_COMMAND}`; export r; \ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ $(SET_LIB_PATH) \ - echo "Doing install-info in $(TARGET_SUBDIR)/zlib" ; \ - for flag in $(EXTRA_TARGET_FLAGS); do \ + for flag in $(EXTRA_HOST_FLAGS); do \ eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \ done; \ - (cd $(TARGET_SUBDIR)/zlib && \ + echo "Doing clean in itcl" ; \ + (cd itcl && \ $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \ "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \ "RANLIB=$${RANLIB}" \ "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" \ - install-info) \ + clean) \ || exit 1 -.PHONY: maybe-install-info-target-boehm-gc install-info-target-boehm-gc -maybe-install-info-target-boehm-gc: +.PHONY: maybe-distclean-itcl distclean-itcl +maybe-distclean-itcl: -install-info-target-boehm-gc: \ - configure-target-boehm-gc \ - info-target-boehm-gc - @[ -f $(TARGET_SUBDIR)/boehm-gc/Makefile ] || exit 0 ; \ +distclean-itcl: + @[ -f ./itcl/Makefile ] || exit 0; \ r=`${PWD_COMMAND}`; export r; \ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ $(SET_LIB_PATH) \ - echo "Doing install-info in $(TARGET_SUBDIR)/boehm-gc" ; \ - for flag in $(EXTRA_TARGET_FLAGS); do \ + for flag in $(EXTRA_HOST_FLAGS); do \ eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \ done; \ - (cd $(TARGET_SUBDIR)/boehm-gc && \ + echo "Doing distclean in itcl" ; \ + (cd itcl && \ $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \ "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \ "RANLIB=$${RANLIB}" \ "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" \ - install-info) \ + distclean) \ || exit 1 -.PHONY: maybe-install-info-target-qthreads install-info-target-qthreads -maybe-install-info-target-qthreads: +.PHONY: maybe-maintainer-clean-itcl maintainer-clean-itcl +maybe-maintainer-clean-itcl: -install-info-target-qthreads: \ - configure-target-qthreads \ - info-target-qthreads - @[ -f $(TARGET_SUBDIR)/qthreads/Makefile ] || exit 0 ; \ +maintainer-clean-itcl: + @[ -f ./itcl/Makefile ] || exit 0; \ r=`${PWD_COMMAND}`; export r; \ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ $(SET_LIB_PATH) \ - echo "Doing install-info in $(TARGET_SUBDIR)/qthreads" ; \ - for flag in $(EXTRA_TARGET_FLAGS); do \ + for flag in $(EXTRA_HOST_FLAGS); do \ eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \ done; \ - (cd $(TARGET_SUBDIR)/qthreads && \ + echo "Doing maintainer-clean in itcl" ; \ + (cd itcl && \ $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \ "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \ "RANLIB=$${RANLIB}" \ "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" \ - install-info) \ + maintainer-clean) \ || exit 1 -.PHONY: maybe-install-info-target-rda install-info-target-rda -maybe-install-info-target-rda: -install-info-target-rda: \ - configure-target-rda \ - info-target-rda - @[ -f $(TARGET_SUBDIR)/rda/Makefile ] || exit 0 ; \ +.PHONY: configure-ld maybe-configure-ld +maybe-configure-ld: +configure-ld: + @test ! -f ld/Makefile || exit 0; \ + [ -d ld ] || mkdir ld; \ r=`${PWD_COMMAND}`; export r; \ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ - $(SET_LIB_PATH) \ - echo "Doing install-info in $(TARGET_SUBDIR)/rda" ; \ - for flag in $(EXTRA_TARGET_FLAGS); do \ - eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \ - done; \ - (cd $(TARGET_SUBDIR)/rda && \ - $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \ - "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \ - "RANLIB=$${RANLIB}" \ - "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" \ - install-info) \ + CC="$(CC)"; export CC; \ + CFLAGS="$(CFLAGS)"; export CFLAGS; \ + CONFIG_SHELL="$(SHELL)"; export CONFIG_SHELL; \ + CXX="$(CXX)"; export CXX; \ + CXXFLAGS="$(CXXFLAGS)"; export CXXFLAGS; \ + AR="$(AR)"; export AR; \ + AS="$(AS)"; export AS; \ + CC_FOR_BUILD="$(CC_FOR_BUILD)"; export CC_FOR_BUILD; \ + DLLTOOL="$(DLLTOOL)"; export DLLTOOL; \ + LD="$(LD)"; export LD; \ + NM="$(NM)"; export NM; \ + RANLIB="$(RANLIB)"; export RANLIB; \ + WINDRES="$(WINDRES)"; export WINDRES; \ + OBJCOPY="$(OBJCOPY)"; export OBJCOPY; \ + OBJDUMP="$(OBJDUMP)"; export OBJDUMP; \ + echo Configuring in ld; \ + cd ld || exit 1; \ + case $(srcdir) in \ + \.) \ + srcdiroption="--srcdir=."; \ + libsrcdir=".";; \ + /* | [A-Za-z]:[\\/]*) \ + srcdiroption="--srcdir=$(srcdir)/ld"; \ + libsrcdir="$$s/ld";; \ + *) \ + srcdiroption="--srcdir=../$(srcdir)/ld"; \ + libsrcdir="$$s/ld";; \ + esac; \ + $(SHELL) $${libsrcdir}/configure \ + $(HOST_CONFIGARGS) $${srcdiroption} \ || exit 1 +.PHONY: all-ld maybe-all-ld +maybe-all-ld: +all-ld: configure-ld + @r=`${PWD_COMMAND}`; export r; \ + s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ + $(SET_LIB_PATH) \ + (cd ld && $(MAKE) $(FLAGS_TO_PASS) all) -.PHONY: maybe-install-info-target-libada install-info-target-libada -maybe-install-info-target-libada: +.PHONY: check-ld maybe-check-ld +maybe-check-ld: -install-info-target-libada: \ - configure-target-libada \ - info-target-libada - @[ -f $(TARGET_SUBDIR)/libada/Makefile ] || exit 0 ; \ - r=`${PWD_COMMAND}`; export r; \ +check-ld: + @r=`${PWD_COMMAND}`; export r; \ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ $(SET_LIB_PATH) \ - echo "Doing install-info in $(TARGET_SUBDIR)/libada" ; \ - for flag in $(EXTRA_TARGET_FLAGS); do \ - eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \ - done; \ - (cd $(TARGET_SUBDIR)/libada && \ - $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \ - "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \ - "RANLIB=$${RANLIB}" \ - "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" \ - install-info) \ - || exit 1 + (cd ld && $(MAKE) $(FLAGS_TO_PASS) check) +.PHONY: install-ld maybe-install-ld +maybe-install-ld: -.PHONY: do-installcheck -do-installcheck: installcheck-host installcheck-target +install-ld: installdirs + @r=`${PWD_COMMAND}`; export r; \ + s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ + $(SET_LIB_PATH) \ + (cd ld && $(MAKE) $(FLAGS_TO_PASS) install) -.PHONY: installcheck-host -installcheck-host: maybe-installcheck-gcc \ - maybe-installcheck-ash \ - maybe-installcheck-autoconf \ - maybe-installcheck-automake \ - maybe-installcheck-bash \ - maybe-installcheck-bfd \ - maybe-installcheck-opcodes \ - maybe-installcheck-binutils \ - maybe-installcheck-bison \ - maybe-installcheck-byacc \ - maybe-installcheck-bzip2 \ - maybe-installcheck-dejagnu \ - maybe-installcheck-diff \ - maybe-installcheck-dosutils \ - maybe-installcheck-etc \ - maybe-installcheck-fastjar \ - maybe-installcheck-fileutils \ - maybe-installcheck-findutils \ - maybe-installcheck-find \ - maybe-installcheck-flex \ - maybe-installcheck-gas \ - maybe-installcheck-gawk \ - maybe-installcheck-gettext \ - maybe-installcheck-gnuserv \ - maybe-installcheck-gprof \ - maybe-installcheck-gzip \ - maybe-installcheck-hello \ - maybe-installcheck-indent \ - maybe-installcheck-intl \ - maybe-installcheck-tcl \ - maybe-installcheck-itcl \ - maybe-installcheck-ld \ - maybe-installcheck-libgui \ - maybe-installcheck-libiberty \ - maybe-installcheck-libtool \ - maybe-installcheck-m4 \ - maybe-installcheck-make \ - maybe-installcheck-mmalloc \ - maybe-installcheck-patch \ - maybe-installcheck-perl \ - maybe-installcheck-prms \ - maybe-installcheck-rcs \ - maybe-installcheck-readline \ - maybe-installcheck-release \ - maybe-installcheck-recode \ - maybe-installcheck-sed \ - maybe-installcheck-send-pr \ - maybe-installcheck-shellutils \ - maybe-installcheck-sid \ - maybe-installcheck-sim \ - maybe-installcheck-tar \ - maybe-installcheck-texinfo \ - maybe-installcheck-textutils \ - maybe-installcheck-time \ - maybe-installcheck-uudecode \ - maybe-installcheck-wdiff \ - maybe-installcheck-zip \ - maybe-installcheck-zlib \ - maybe-installcheck-gdb \ - maybe-installcheck-expect \ - maybe-installcheck-guile \ - maybe-installcheck-tk \ - maybe-installcheck-tix \ - maybe-installcheck-libtermcap \ - maybe-installcheck-utils -.PHONY: installcheck-target -installcheck-target: \ - maybe-installcheck-target-libstdc++-v3 \ - maybe-installcheck-target-newlib \ - maybe-installcheck-target-libf2c \ - maybe-installcheck-target-libobjc \ - maybe-installcheck-target-libtermcap \ - maybe-installcheck-target-winsup \ - maybe-installcheck-target-libgloss \ - maybe-installcheck-target-libiberty \ - maybe-installcheck-target-gperf \ - maybe-installcheck-target-examples \ - maybe-installcheck-target-libffi \ - maybe-installcheck-target-libjava \ - maybe-installcheck-target-zlib \ - maybe-installcheck-target-boehm-gc \ - maybe-installcheck-target-qthreads \ - maybe-installcheck-target-rda \ - maybe-installcheck-target-libada +# Other targets (info, dvi, etc.) -# GCC, the eternal special case -.PHONY: maybe-installcheck-gcc installcheck-gcc -maybe-installcheck-gcc: -installcheck-gcc: \ - configure-gcc - @[ -f ./gcc/Makefile ] || exit 0; \ +.PHONY: maybe-info-ld info-ld +maybe-info-ld: + +info-ld: \ + configure-ld + @[ -f ./ld/Makefile ] || exit 0; \ r=`${PWD_COMMAND}`; export r; \ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ $(SET_LIB_PATH) \ - for flag in $(EXTRA_GCC_FLAGS); do \ + for flag in $(EXTRA_HOST_FLAGS); do \ eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \ done; \ - echo "Doing installcheck in gcc" ; \ - (cd gcc && \ + echo "Doing info in ld" ; \ + (cd ld && \ $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \ "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \ "RANLIB=$${RANLIB}" \ "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" \ - installcheck) \ + info) \ || exit 1 -# Host modules. -.PHONY: maybe-installcheck-ash installcheck-ash -maybe-installcheck-ash: +.PHONY: maybe-dvi-ld dvi-ld +maybe-dvi-ld: -installcheck-ash: \ - configure-ash - @[ -f ./ash/Makefile ] || exit 0; \ +dvi-ld: \ + configure-ld + @[ -f ./ld/Makefile ] || exit 0; \ r=`${PWD_COMMAND}`; export r; \ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ $(SET_LIB_PATH) \ for flag in $(EXTRA_HOST_FLAGS); do \ eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \ done; \ - echo "Doing installcheck in ash" ; \ - (cd ash && \ + echo "Doing dvi in ld" ; \ + (cd ld && \ $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \ "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \ "RANLIB=$${RANLIB}" \ "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" \ - installcheck) \ + dvi) \ || exit 1 -.PHONY: maybe-installcheck-autoconf installcheck-autoconf -maybe-installcheck-autoconf: +.PHONY: maybe-TAGS-ld TAGS-ld +maybe-TAGS-ld: -installcheck-autoconf: \ - configure-autoconf - @[ -f ./autoconf/Makefile ] || exit 0; \ +TAGS-ld: \ + configure-ld + @[ -f ./ld/Makefile ] || exit 0; \ r=`${PWD_COMMAND}`; export r; \ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ $(SET_LIB_PATH) \ for flag in $(EXTRA_HOST_FLAGS); do \ eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \ done; \ - echo "Doing installcheck in autoconf" ; \ - (cd autoconf && \ + echo "Doing TAGS in ld" ; \ + (cd ld && \ $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \ "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \ "RANLIB=$${RANLIB}" \ "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" \ - installcheck) \ + TAGS) \ || exit 1 -.PHONY: maybe-installcheck-automake installcheck-automake -maybe-installcheck-automake: +.PHONY: maybe-install-info-ld install-info-ld +maybe-install-info-ld: -installcheck-automake: \ - configure-automake - @[ -f ./automake/Makefile ] || exit 0; \ +install-info-ld: \ + configure-ld \ + info-ld + @[ -f ./ld/Makefile ] || exit 0; \ r=`${PWD_COMMAND}`; export r; \ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ $(SET_LIB_PATH) \ for flag in $(EXTRA_HOST_FLAGS); do \ eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \ done; \ - echo "Doing installcheck in automake" ; \ - (cd automake && \ + echo "Doing install-info in ld" ; \ + (cd ld && \ $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \ "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \ "RANLIB=$${RANLIB}" \ "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" \ - installcheck) \ + install-info) \ || exit 1 -.PHONY: maybe-installcheck-bash installcheck-bash -maybe-installcheck-bash: +.PHONY: maybe-installcheck-ld installcheck-ld +maybe-installcheck-ld: -installcheck-bash: \ - configure-bash - @[ -f ./bash/Makefile ] || exit 0; \ +installcheck-ld: \ + configure-ld + @[ -f ./ld/Makefile ] || exit 0; \ r=`${PWD_COMMAND}`; export r; \ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ $(SET_LIB_PATH) \ for flag in $(EXTRA_HOST_FLAGS); do \ eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \ done; \ - echo "Doing installcheck in bash" ; \ - (cd bash && \ + echo "Doing installcheck in ld" ; \ + (cd ld && \ $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \ "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \ "RANLIB=$${RANLIB}" \ @@ -8587,218 +10094,263 @@ installcheck-bash: \ || exit 1 -.PHONY: maybe-installcheck-bfd installcheck-bfd -maybe-installcheck-bfd: +.PHONY: maybe-mostlyclean-ld mostlyclean-ld +maybe-mostlyclean-ld: -installcheck-bfd: \ - configure-bfd - @[ -f ./bfd/Makefile ] || exit 0; \ +mostlyclean-ld: + @[ -f ./ld/Makefile ] || exit 0; \ r=`${PWD_COMMAND}`; export r; \ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ $(SET_LIB_PATH) \ for flag in $(EXTRA_HOST_FLAGS); do \ eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \ done; \ - echo "Doing installcheck in bfd" ; \ - (cd bfd && \ + echo "Doing mostlyclean in ld" ; \ + (cd ld && \ $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \ "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \ "RANLIB=$${RANLIB}" \ "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" \ - installcheck) \ + mostlyclean) \ || exit 1 -.PHONY: maybe-installcheck-opcodes installcheck-opcodes -maybe-installcheck-opcodes: +.PHONY: maybe-clean-ld clean-ld +maybe-clean-ld: -installcheck-opcodes: \ - configure-opcodes - @[ -f ./opcodes/Makefile ] || exit 0; \ +clean-ld: + @[ -f ./ld/Makefile ] || exit 0; \ r=`${PWD_COMMAND}`; export r; \ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ $(SET_LIB_PATH) \ for flag in $(EXTRA_HOST_FLAGS); do \ eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \ done; \ - echo "Doing installcheck in opcodes" ; \ - (cd opcodes && \ + echo "Doing clean in ld" ; \ + (cd ld && \ $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \ "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \ "RANLIB=$${RANLIB}" \ "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" \ - installcheck) \ + clean) \ || exit 1 -.PHONY: maybe-installcheck-binutils installcheck-binutils -maybe-installcheck-binutils: +.PHONY: maybe-distclean-ld distclean-ld +maybe-distclean-ld: -installcheck-binutils: \ - configure-binutils - @[ -f ./binutils/Makefile ] || exit 0; \ +distclean-ld: + @[ -f ./ld/Makefile ] || exit 0; \ r=`${PWD_COMMAND}`; export r; \ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ $(SET_LIB_PATH) \ for flag in $(EXTRA_HOST_FLAGS); do \ eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \ done; \ - echo "Doing installcheck in binutils" ; \ - (cd binutils && \ + echo "Doing distclean in ld" ; \ + (cd ld && \ $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \ "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \ "RANLIB=$${RANLIB}" \ "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" \ - installcheck) \ + distclean) \ || exit 1 -.PHONY: maybe-installcheck-bison installcheck-bison -maybe-installcheck-bison: +.PHONY: maybe-maintainer-clean-ld maintainer-clean-ld +maybe-maintainer-clean-ld: -installcheck-bison: \ - configure-bison - @[ -f ./bison/Makefile ] || exit 0; \ +maintainer-clean-ld: + @[ -f ./ld/Makefile ] || exit 0; \ r=`${PWD_COMMAND}`; export r; \ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ $(SET_LIB_PATH) \ for flag in $(EXTRA_HOST_FLAGS); do \ eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \ done; \ - echo "Doing installcheck in bison" ; \ - (cd bison && \ + echo "Doing maintainer-clean in ld" ; \ + (cd ld && \ $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \ "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \ "RANLIB=$${RANLIB}" \ "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" \ - installcheck) \ + maintainer-clean) \ || exit 1 -.PHONY: maybe-installcheck-byacc installcheck-byacc -maybe-installcheck-byacc: -installcheck-byacc: \ - configure-byacc - @[ -f ./byacc/Makefile ] || exit 0; \ +.PHONY: configure-libgui maybe-configure-libgui +maybe-configure-libgui: +configure-libgui: + @test ! -f libgui/Makefile || exit 0; \ + [ -d libgui ] || mkdir libgui; \ r=`${PWD_COMMAND}`; export r; \ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ - $(SET_LIB_PATH) \ - for flag in $(EXTRA_HOST_FLAGS); do \ - eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \ - done; \ - echo "Doing installcheck in byacc" ; \ - (cd byacc && \ - $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \ - "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \ - "RANLIB=$${RANLIB}" \ - "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" \ - installcheck) \ + CC="$(CC)"; export CC; \ + CFLAGS="$(CFLAGS)"; export CFLAGS; \ + CONFIG_SHELL="$(SHELL)"; export CONFIG_SHELL; \ + CXX="$(CXX)"; export CXX; \ + CXXFLAGS="$(CXXFLAGS)"; export CXXFLAGS; \ + AR="$(AR)"; export AR; \ + AS="$(AS)"; export AS; \ + CC_FOR_BUILD="$(CC_FOR_BUILD)"; export CC_FOR_BUILD; \ + DLLTOOL="$(DLLTOOL)"; export DLLTOOL; \ + LD="$(LD)"; export LD; \ + NM="$(NM)"; export NM; \ + RANLIB="$(RANLIB)"; export RANLIB; \ + WINDRES="$(WINDRES)"; export WINDRES; \ + OBJCOPY="$(OBJCOPY)"; export OBJCOPY; \ + OBJDUMP="$(OBJDUMP)"; export OBJDUMP; \ + echo Configuring in libgui; \ + cd libgui || exit 1; \ + case $(srcdir) in \ + \.) \ + srcdiroption="--srcdir=."; \ + libsrcdir=".";; \ + /* | [A-Za-z]:[\\/]*) \ + srcdiroption="--srcdir=$(srcdir)/libgui"; \ + libsrcdir="$$s/libgui";; \ + *) \ + srcdiroption="--srcdir=../$(srcdir)/libgui"; \ + libsrcdir="$$s/libgui";; \ + esac; \ + $(SHELL) $${libsrcdir}/configure \ + $(HOST_CONFIGARGS) $${srcdiroption} \ || exit 1 +.PHONY: all-libgui maybe-all-libgui +maybe-all-libgui: +all-libgui: configure-libgui + @r=`${PWD_COMMAND}`; export r; \ + s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ + $(SET_LIB_PATH) \ + (cd libgui && $(MAKE) $(FLAGS_TO_PASS) all) -.PHONY: maybe-installcheck-bzip2 installcheck-bzip2 -maybe-installcheck-bzip2: +.PHONY: check-libgui maybe-check-libgui +maybe-check-libgui: -installcheck-bzip2: \ - configure-bzip2 - @[ -f ./bzip2/Makefile ] || exit 0; \ +check-libgui: + @r=`${PWD_COMMAND}`; export r; \ + s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ + $(SET_LIB_PATH) \ + (cd libgui && $(MAKE) $(FLAGS_TO_PASS) check) + + +.PHONY: install-libgui maybe-install-libgui +maybe-install-libgui: + +install-libgui: installdirs + @r=`${PWD_COMMAND}`; export r; \ + s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ + $(SET_LIB_PATH) \ + (cd libgui && $(MAKE) $(FLAGS_TO_PASS) install) + + +# Other targets (info, dvi, etc.) + +.PHONY: maybe-info-libgui info-libgui +maybe-info-libgui: + +info-libgui: \ + configure-libgui + @[ -f ./libgui/Makefile ] || exit 0; \ r=`${PWD_COMMAND}`; export r; \ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ $(SET_LIB_PATH) \ for flag in $(EXTRA_HOST_FLAGS); do \ eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \ done; \ - echo "Doing installcheck in bzip2" ; \ - (cd bzip2 && \ + echo "Doing info in libgui" ; \ + (cd libgui && \ $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \ "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \ "RANLIB=$${RANLIB}" \ "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" \ - installcheck) \ + info) \ || exit 1 -.PHONY: maybe-installcheck-dejagnu installcheck-dejagnu -maybe-installcheck-dejagnu: +.PHONY: maybe-dvi-libgui dvi-libgui +maybe-dvi-libgui: -installcheck-dejagnu: \ - configure-dejagnu - @[ -f ./dejagnu/Makefile ] || exit 0; \ +dvi-libgui: \ + configure-libgui + @[ -f ./libgui/Makefile ] || exit 0; \ r=`${PWD_COMMAND}`; export r; \ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ $(SET_LIB_PATH) \ for flag in $(EXTRA_HOST_FLAGS); do \ eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \ done; \ - echo "Doing installcheck in dejagnu" ; \ - (cd dejagnu && \ + echo "Doing dvi in libgui" ; \ + (cd libgui && \ $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \ "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \ "RANLIB=$${RANLIB}" \ "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" \ - installcheck) \ + dvi) \ || exit 1 -.PHONY: maybe-installcheck-diff installcheck-diff -maybe-installcheck-diff: +.PHONY: maybe-TAGS-libgui TAGS-libgui +maybe-TAGS-libgui: -installcheck-diff: \ - configure-diff - @[ -f ./diff/Makefile ] || exit 0; \ +TAGS-libgui: \ + configure-libgui + @[ -f ./libgui/Makefile ] || exit 0; \ r=`${PWD_COMMAND}`; export r; \ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ $(SET_LIB_PATH) \ for flag in $(EXTRA_HOST_FLAGS); do \ eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \ done; \ - echo "Doing installcheck in diff" ; \ - (cd diff && \ + echo "Doing TAGS in libgui" ; \ + (cd libgui && \ $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \ "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \ "RANLIB=$${RANLIB}" \ "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" \ - installcheck) \ + TAGS) \ || exit 1 -.PHONY: maybe-installcheck-dosutils installcheck-dosutils -maybe-installcheck-dosutils: +.PHONY: maybe-install-info-libgui install-info-libgui +maybe-install-info-libgui: -installcheck-dosutils: \ - configure-dosutils - @[ -f ./dosutils/Makefile ] || exit 0; \ +install-info-libgui: \ + configure-libgui \ + info-libgui + @[ -f ./libgui/Makefile ] || exit 0; \ r=`${PWD_COMMAND}`; export r; \ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ $(SET_LIB_PATH) \ for flag in $(EXTRA_HOST_FLAGS); do \ eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \ done; \ - echo "Doing installcheck in dosutils" ; \ - (cd dosutils && \ + echo "Doing install-info in libgui" ; \ + (cd libgui && \ $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \ "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \ "RANLIB=$${RANLIB}" \ "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" \ - installcheck) \ + install-info) \ || exit 1 -.PHONY: maybe-installcheck-etc installcheck-etc -maybe-installcheck-etc: +.PHONY: maybe-installcheck-libgui installcheck-libgui +maybe-installcheck-libgui: -installcheck-etc: \ - configure-etc - @[ -f ./etc/Makefile ] || exit 0; \ +installcheck-libgui: \ + configure-libgui + @[ -f ./libgui/Makefile ] || exit 0; \ r=`${PWD_COMMAND}`; export r; \ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ $(SET_LIB_PATH) \ for flag in $(EXTRA_HOST_FLAGS); do \ eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \ done; \ - echo "Doing installcheck in etc" ; \ - (cd etc && \ + echo "Doing installcheck in libgui" ; \ + (cd libgui && \ $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \ "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \ "RANLIB=$${RANLIB}" \ @@ -8807,218 +10359,263 @@ installcheck-etc: \ || exit 1 -.PHONY: maybe-installcheck-fastjar installcheck-fastjar -maybe-installcheck-fastjar: +.PHONY: maybe-mostlyclean-libgui mostlyclean-libgui +maybe-mostlyclean-libgui: -installcheck-fastjar: \ - configure-fastjar - @[ -f ./fastjar/Makefile ] || exit 0; \ +mostlyclean-libgui: + @[ -f ./libgui/Makefile ] || exit 0; \ r=`${PWD_COMMAND}`; export r; \ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ $(SET_LIB_PATH) \ for flag in $(EXTRA_HOST_FLAGS); do \ eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \ done; \ - echo "Doing installcheck in fastjar" ; \ - (cd fastjar && \ + echo "Doing mostlyclean in libgui" ; \ + (cd libgui && \ $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \ "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \ "RANLIB=$${RANLIB}" \ "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" \ - installcheck) \ + mostlyclean) \ || exit 1 -.PHONY: maybe-installcheck-fileutils installcheck-fileutils -maybe-installcheck-fileutils: +.PHONY: maybe-clean-libgui clean-libgui +maybe-clean-libgui: -installcheck-fileutils: \ - configure-fileutils - @[ -f ./fileutils/Makefile ] || exit 0; \ +clean-libgui: + @[ -f ./libgui/Makefile ] || exit 0; \ r=`${PWD_COMMAND}`; export r; \ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ $(SET_LIB_PATH) \ for flag in $(EXTRA_HOST_FLAGS); do \ eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \ done; \ - echo "Doing installcheck in fileutils" ; \ - (cd fileutils && \ + echo "Doing clean in libgui" ; \ + (cd libgui && \ $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \ "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \ "RANLIB=$${RANLIB}" \ "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" \ - installcheck) \ + clean) \ || exit 1 -.PHONY: maybe-installcheck-findutils installcheck-findutils -maybe-installcheck-findutils: +.PHONY: maybe-distclean-libgui distclean-libgui +maybe-distclean-libgui: -installcheck-findutils: \ - configure-findutils - @[ -f ./findutils/Makefile ] || exit 0; \ +distclean-libgui: + @[ -f ./libgui/Makefile ] || exit 0; \ r=`${PWD_COMMAND}`; export r; \ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ $(SET_LIB_PATH) \ for flag in $(EXTRA_HOST_FLAGS); do \ eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \ done; \ - echo "Doing installcheck in findutils" ; \ - (cd findutils && \ + echo "Doing distclean in libgui" ; \ + (cd libgui && \ $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \ "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \ "RANLIB=$${RANLIB}" \ "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" \ - installcheck) \ + distclean) \ || exit 1 -.PHONY: maybe-installcheck-find installcheck-find -maybe-installcheck-find: +.PHONY: maybe-maintainer-clean-libgui maintainer-clean-libgui +maybe-maintainer-clean-libgui: -installcheck-find: \ - configure-find - @[ -f ./find/Makefile ] || exit 0; \ +maintainer-clean-libgui: + @[ -f ./libgui/Makefile ] || exit 0; \ r=`${PWD_COMMAND}`; export r; \ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ $(SET_LIB_PATH) \ for flag in $(EXTRA_HOST_FLAGS); do \ eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \ done; \ - echo "Doing installcheck in find" ; \ - (cd find && \ + echo "Doing maintainer-clean in libgui" ; \ + (cd libgui && \ $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \ "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \ "RANLIB=$${RANLIB}" \ "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" \ - installcheck) \ + maintainer-clean) \ || exit 1 -.PHONY: maybe-installcheck-flex installcheck-flex -maybe-installcheck-flex: -installcheck-flex: \ - configure-flex - @[ -f ./flex/Makefile ] || exit 0; \ +.PHONY: configure-libiberty maybe-configure-libiberty +maybe-configure-libiberty: +configure-libiberty: + @test ! -f libiberty/Makefile || exit 0; \ + [ -d libiberty ] || mkdir libiberty; \ r=`${PWD_COMMAND}`; export r; \ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ - $(SET_LIB_PATH) \ - for flag in $(EXTRA_HOST_FLAGS); do \ - eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \ - done; \ - echo "Doing installcheck in flex" ; \ - (cd flex && \ - $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \ - "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \ - "RANLIB=$${RANLIB}" \ - "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" \ - installcheck) \ + CC="$(CC)"; export CC; \ + CFLAGS="$(CFLAGS)"; export CFLAGS; \ + CONFIG_SHELL="$(SHELL)"; export CONFIG_SHELL; \ + CXX="$(CXX)"; export CXX; \ + CXXFLAGS="$(CXXFLAGS)"; export CXXFLAGS; \ + AR="$(AR)"; export AR; \ + AS="$(AS)"; export AS; \ + CC_FOR_BUILD="$(CC_FOR_BUILD)"; export CC_FOR_BUILD; \ + DLLTOOL="$(DLLTOOL)"; export DLLTOOL; \ + LD="$(LD)"; export LD; \ + NM="$(NM)"; export NM; \ + RANLIB="$(RANLIB)"; export RANLIB; \ + WINDRES="$(WINDRES)"; export WINDRES; \ + OBJCOPY="$(OBJCOPY)"; export OBJCOPY; \ + OBJDUMP="$(OBJDUMP)"; export OBJDUMP; \ + echo Configuring in libiberty; \ + cd libiberty || exit 1; \ + case $(srcdir) in \ + \.) \ + srcdiroption="--srcdir=."; \ + libsrcdir=".";; \ + /* | [A-Za-z]:[\\/]*) \ + srcdiroption="--srcdir=$(srcdir)/libiberty"; \ + libsrcdir="$$s/libiberty";; \ + *) \ + srcdiroption="--srcdir=../$(srcdir)/libiberty"; \ + libsrcdir="$$s/libiberty";; \ + esac; \ + $(SHELL) $${libsrcdir}/configure \ + $(HOST_CONFIGARGS) $${srcdiroption} \ || exit 1 +.PHONY: all-libiberty maybe-all-libiberty +maybe-all-libiberty: +all-libiberty: configure-libiberty + @r=`${PWD_COMMAND}`; export r; \ + s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ + $(SET_LIB_PATH) \ + (cd libiberty && $(MAKE) $(FLAGS_TO_PASS) all) -.PHONY: maybe-installcheck-gas installcheck-gas -maybe-installcheck-gas: +.PHONY: check-libiberty maybe-check-libiberty +maybe-check-libiberty: -installcheck-gas: \ - configure-gas - @[ -f ./gas/Makefile ] || exit 0; \ +check-libiberty: + @r=`${PWD_COMMAND}`; export r; \ + s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ + $(SET_LIB_PATH) \ + (cd libiberty && $(MAKE) $(FLAGS_TO_PASS) check) + + +.PHONY: install-libiberty maybe-install-libiberty +maybe-install-libiberty: + +install-libiberty: installdirs + @r=`${PWD_COMMAND}`; export r; \ + s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ + $(SET_LIB_PATH) \ + (cd libiberty && $(MAKE) $(FLAGS_TO_PASS) install) + + +# Other targets (info, dvi, etc.) + +.PHONY: maybe-info-libiberty info-libiberty +maybe-info-libiberty: + +info-libiberty: \ + configure-libiberty + @[ -f ./libiberty/Makefile ] || exit 0; \ r=`${PWD_COMMAND}`; export r; \ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ $(SET_LIB_PATH) \ for flag in $(EXTRA_HOST_FLAGS); do \ eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \ done; \ - echo "Doing installcheck in gas" ; \ - (cd gas && \ + echo "Doing info in libiberty" ; \ + (cd libiberty && \ $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \ "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \ "RANLIB=$${RANLIB}" \ "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" \ - installcheck) \ + info) \ || exit 1 -.PHONY: maybe-installcheck-gawk installcheck-gawk -maybe-installcheck-gawk: +.PHONY: maybe-dvi-libiberty dvi-libiberty +maybe-dvi-libiberty: -installcheck-gawk: \ - configure-gawk - @[ -f ./gawk/Makefile ] || exit 0; \ +dvi-libiberty: \ + configure-libiberty + @[ -f ./libiberty/Makefile ] || exit 0; \ r=`${PWD_COMMAND}`; export r; \ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ $(SET_LIB_PATH) \ for flag in $(EXTRA_HOST_FLAGS); do \ eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \ done; \ - echo "Doing installcheck in gawk" ; \ - (cd gawk && \ + echo "Doing dvi in libiberty" ; \ + (cd libiberty && \ $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \ "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \ "RANLIB=$${RANLIB}" \ "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" \ - installcheck) \ + dvi) \ || exit 1 -.PHONY: maybe-installcheck-gettext installcheck-gettext -maybe-installcheck-gettext: +.PHONY: maybe-TAGS-libiberty TAGS-libiberty +maybe-TAGS-libiberty: -installcheck-gettext: \ - configure-gettext - @[ -f ./gettext/Makefile ] || exit 0; \ +TAGS-libiberty: \ + configure-libiberty + @[ -f ./libiberty/Makefile ] || exit 0; \ r=`${PWD_COMMAND}`; export r; \ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ $(SET_LIB_PATH) \ for flag in $(EXTRA_HOST_FLAGS); do \ eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \ done; \ - echo "Doing installcheck in gettext" ; \ - (cd gettext && \ + echo "Doing TAGS in libiberty" ; \ + (cd libiberty && \ $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \ "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \ "RANLIB=$${RANLIB}" \ "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" \ - installcheck) \ + TAGS) \ || exit 1 -.PHONY: maybe-installcheck-gnuserv installcheck-gnuserv -maybe-installcheck-gnuserv: +.PHONY: maybe-install-info-libiberty install-info-libiberty +maybe-install-info-libiberty: -installcheck-gnuserv: \ - configure-gnuserv - @[ -f ./gnuserv/Makefile ] || exit 0; \ +install-info-libiberty: \ + configure-libiberty \ + info-libiberty + @[ -f ./libiberty/Makefile ] || exit 0; \ r=`${PWD_COMMAND}`; export r; \ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ $(SET_LIB_PATH) \ for flag in $(EXTRA_HOST_FLAGS); do \ eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \ done; \ - echo "Doing installcheck in gnuserv" ; \ - (cd gnuserv && \ + echo "Doing install-info in libiberty" ; \ + (cd libiberty && \ $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \ "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \ "RANLIB=$${RANLIB}" \ "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" \ - installcheck) \ + install-info) \ || exit 1 -.PHONY: maybe-installcheck-gprof installcheck-gprof -maybe-installcheck-gprof: +.PHONY: maybe-installcheck-libiberty installcheck-libiberty +maybe-installcheck-libiberty: -installcheck-gprof: \ - configure-gprof - @[ -f ./gprof/Makefile ] || exit 0; \ +installcheck-libiberty: \ + configure-libiberty + @[ -f ./libiberty/Makefile ] || exit 0; \ r=`${PWD_COMMAND}`; export r; \ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ $(SET_LIB_PATH) \ for flag in $(EXTRA_HOST_FLAGS); do \ eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \ done; \ - echo "Doing installcheck in gprof" ; \ - (cd gprof && \ + echo "Doing installcheck in libiberty" ; \ + (cd libiberty && \ $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \ "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \ "RANLIB=$${RANLIB}" \ @@ -9027,201 +10624,246 @@ installcheck-gprof: \ || exit 1 -.PHONY: maybe-installcheck-gzip installcheck-gzip -maybe-installcheck-gzip: +.PHONY: maybe-mostlyclean-libiberty mostlyclean-libiberty +maybe-mostlyclean-libiberty: -installcheck-gzip: \ - configure-gzip - @[ -f ./gzip/Makefile ] || exit 0; \ +mostlyclean-libiberty: + @[ -f ./libiberty/Makefile ] || exit 0; \ r=`${PWD_COMMAND}`; export r; \ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ $(SET_LIB_PATH) \ for flag in $(EXTRA_HOST_FLAGS); do \ eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \ done; \ - echo "Doing installcheck in gzip" ; \ - (cd gzip && \ + echo "Doing mostlyclean in libiberty" ; \ + (cd libiberty && \ $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \ "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \ "RANLIB=$${RANLIB}" \ "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" \ - installcheck) \ + mostlyclean) \ || exit 1 -.PHONY: maybe-installcheck-hello installcheck-hello -maybe-installcheck-hello: +.PHONY: maybe-clean-libiberty clean-libiberty +maybe-clean-libiberty: -installcheck-hello: \ - configure-hello - @[ -f ./hello/Makefile ] || exit 0; \ +clean-libiberty: + @[ -f ./libiberty/Makefile ] || exit 0; \ r=`${PWD_COMMAND}`; export r; \ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ $(SET_LIB_PATH) \ for flag in $(EXTRA_HOST_FLAGS); do \ eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \ done; \ - echo "Doing installcheck in hello" ; \ - (cd hello && \ + echo "Doing clean in libiberty" ; \ + (cd libiberty && \ $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \ "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \ "RANLIB=$${RANLIB}" \ "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" \ - installcheck) \ + clean) \ || exit 1 -.PHONY: maybe-installcheck-indent installcheck-indent -maybe-installcheck-indent: +.PHONY: maybe-distclean-libiberty distclean-libiberty +maybe-distclean-libiberty: -installcheck-indent: \ - configure-indent - @[ -f ./indent/Makefile ] || exit 0; \ +distclean-libiberty: + @[ -f ./libiberty/Makefile ] || exit 0; \ r=`${PWD_COMMAND}`; export r; \ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ $(SET_LIB_PATH) \ for flag in $(EXTRA_HOST_FLAGS); do \ eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \ done; \ - echo "Doing installcheck in indent" ; \ - (cd indent && \ + echo "Doing distclean in libiberty" ; \ + (cd libiberty && \ $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \ "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \ "RANLIB=$${RANLIB}" \ "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" \ - installcheck) \ + distclean) \ || exit 1 -.PHONY: maybe-installcheck-intl installcheck-intl -maybe-installcheck-intl: +.PHONY: maybe-maintainer-clean-libiberty maintainer-clean-libiberty +maybe-maintainer-clean-libiberty: -installcheck-intl: \ - configure-intl - @[ -f ./intl/Makefile ] || exit 0; \ +maintainer-clean-libiberty: + @[ -f ./libiberty/Makefile ] || exit 0; \ r=`${PWD_COMMAND}`; export r; \ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ $(SET_LIB_PATH) \ for flag in $(EXTRA_HOST_FLAGS); do \ eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \ done; \ - echo "Doing installcheck in intl" ; \ - (cd intl && \ + echo "Doing maintainer-clean in libiberty" ; \ + (cd libiberty && \ $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \ "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \ "RANLIB=$${RANLIB}" \ "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" \ - installcheck) \ + maintainer-clean) \ || exit 1 -.PHONY: maybe-installcheck-tcl installcheck-tcl -maybe-installcheck-tcl: -installcheck-tcl: \ - configure-tcl - @[ -f ./tcl/Makefile ] || exit 0; \ +.PHONY: configure-libtool maybe-configure-libtool +maybe-configure-libtool: +configure-libtool: + @test ! -f libtool/Makefile || exit 0; \ + [ -d libtool ] || mkdir libtool; \ r=`${PWD_COMMAND}`; export r; \ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ - $(SET_LIB_PATH) \ - for flag in $(EXTRA_HOST_FLAGS); do \ - eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \ - done; \ - echo "Doing installcheck in tcl" ; \ - (cd tcl && \ - $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \ - "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \ - "RANLIB=$${RANLIB}" \ - "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" \ - installcheck) \ + CC="$(CC)"; export CC; \ + CFLAGS="$(CFLAGS)"; export CFLAGS; \ + CONFIG_SHELL="$(SHELL)"; export CONFIG_SHELL; \ + CXX="$(CXX)"; export CXX; \ + CXXFLAGS="$(CXXFLAGS)"; export CXXFLAGS; \ + AR="$(AR)"; export AR; \ + AS="$(AS)"; export AS; \ + CC_FOR_BUILD="$(CC_FOR_BUILD)"; export CC_FOR_BUILD; \ + DLLTOOL="$(DLLTOOL)"; export DLLTOOL; \ + LD="$(LD)"; export LD; \ + NM="$(NM)"; export NM; \ + RANLIB="$(RANLIB)"; export RANLIB; \ + WINDRES="$(WINDRES)"; export WINDRES; \ + OBJCOPY="$(OBJCOPY)"; export OBJCOPY; \ + OBJDUMP="$(OBJDUMP)"; export OBJDUMP; \ + echo Configuring in libtool; \ + cd libtool || exit 1; \ + case $(srcdir) in \ + \.) \ + srcdiroption="--srcdir=."; \ + libsrcdir=".";; \ + /* | [A-Za-z]:[\\/]*) \ + srcdiroption="--srcdir=$(srcdir)/libtool"; \ + libsrcdir="$$s/libtool";; \ + *) \ + srcdiroption="--srcdir=../$(srcdir)/libtool"; \ + libsrcdir="$$s/libtool";; \ + esac; \ + $(SHELL) $${libsrcdir}/configure \ + $(HOST_CONFIGARGS) $${srcdiroption} \ || exit 1 +.PHONY: all-libtool maybe-all-libtool +maybe-all-libtool: +all-libtool: configure-libtool + @r=`${PWD_COMMAND}`; export r; \ + s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ + $(SET_LIB_PATH) \ + (cd libtool && $(MAKE) $(FLAGS_TO_PASS) all) -.PHONY: maybe-installcheck-itcl installcheck-itcl -maybe-installcheck-itcl: +.PHONY: check-libtool maybe-check-libtool +maybe-check-libtool: -installcheck-itcl: \ - configure-itcl - @[ -f ./itcl/Makefile ] || exit 0; \ +check-libtool: + @r=`${PWD_COMMAND}`; export r; \ + s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ + $(SET_LIB_PATH) \ + (cd libtool && $(MAKE) $(FLAGS_TO_PASS) check) + + +.PHONY: install-libtool maybe-install-libtool +maybe-install-libtool: + +install-libtool: installdirs + @r=`${PWD_COMMAND}`; export r; \ + s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ + $(SET_LIB_PATH) \ + (cd libtool && $(MAKE) $(FLAGS_TO_PASS) install) + + +# Other targets (info, dvi, etc.) + +.PHONY: maybe-info-libtool info-libtool +maybe-info-libtool: + +info-libtool: \ + configure-libtool + @[ -f ./libtool/Makefile ] || exit 0; \ r=`${PWD_COMMAND}`; export r; \ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ $(SET_LIB_PATH) \ for flag in $(EXTRA_HOST_FLAGS); do \ eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \ done; \ - echo "Doing installcheck in itcl" ; \ - (cd itcl && \ + echo "Doing info in libtool" ; \ + (cd libtool && \ $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \ "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \ "RANLIB=$${RANLIB}" \ "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" \ - installcheck) \ + info) \ || exit 1 -.PHONY: maybe-installcheck-ld installcheck-ld -maybe-installcheck-ld: +.PHONY: maybe-dvi-libtool dvi-libtool +maybe-dvi-libtool: -installcheck-ld: \ - configure-ld - @[ -f ./ld/Makefile ] || exit 0; \ +dvi-libtool: \ + configure-libtool + @[ -f ./libtool/Makefile ] || exit 0; \ r=`${PWD_COMMAND}`; export r; \ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ $(SET_LIB_PATH) \ for flag in $(EXTRA_HOST_FLAGS); do \ eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \ done; \ - echo "Doing installcheck in ld" ; \ - (cd ld && \ + echo "Doing dvi in libtool" ; \ + (cd libtool && \ $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \ "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \ "RANLIB=$${RANLIB}" \ "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" \ - installcheck) \ + dvi) \ || exit 1 -.PHONY: maybe-installcheck-libgui installcheck-libgui -maybe-installcheck-libgui: +.PHONY: maybe-TAGS-libtool TAGS-libtool +maybe-TAGS-libtool: -installcheck-libgui: \ - configure-libgui - @[ -f ./libgui/Makefile ] || exit 0; \ +TAGS-libtool: \ + configure-libtool + @[ -f ./libtool/Makefile ] || exit 0; \ r=`${PWD_COMMAND}`; export r; \ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ $(SET_LIB_PATH) \ for flag in $(EXTRA_HOST_FLAGS); do \ eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \ done; \ - echo "Doing installcheck in libgui" ; \ - (cd libgui && \ + echo "Doing TAGS in libtool" ; \ + (cd libtool && \ $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \ "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \ "RANLIB=$${RANLIB}" \ "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" \ - installcheck) \ + TAGS) \ || exit 1 -.PHONY: maybe-installcheck-libiberty installcheck-libiberty -maybe-installcheck-libiberty: +.PHONY: maybe-install-info-libtool install-info-libtool +maybe-install-info-libtool: -installcheck-libiberty: \ - configure-libiberty - @[ -f ./libiberty/Makefile ] || exit 0; \ +install-info-libtool: \ + configure-libtool \ + info-libtool + @[ -f ./libtool/Makefile ] || exit 0; \ r=`${PWD_COMMAND}`; export r; \ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ $(SET_LIB_PATH) \ for flag in $(EXTRA_HOST_FLAGS); do \ eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \ done; \ - echo "Doing installcheck in libiberty" ; \ - (cd libiberty && \ + echo "Doing install-info in libtool" ; \ + (cd libtool && \ $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \ "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \ "RANLIB=$${RANLIB}" \ "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" \ - installcheck) \ + install-info) \ || exit 1 @@ -9247,218 +10889,263 @@ installcheck-libtool: \ || exit 1 -.PHONY: maybe-installcheck-m4 installcheck-m4 -maybe-installcheck-m4: +.PHONY: maybe-mostlyclean-libtool mostlyclean-libtool +maybe-mostlyclean-libtool: -installcheck-m4: \ - configure-m4 - @[ -f ./m4/Makefile ] || exit 0; \ +mostlyclean-libtool: + @[ -f ./libtool/Makefile ] || exit 0; \ r=`${PWD_COMMAND}`; export r; \ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ $(SET_LIB_PATH) \ for flag in $(EXTRA_HOST_FLAGS); do \ eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \ done; \ - echo "Doing installcheck in m4" ; \ - (cd m4 && \ + echo "Doing mostlyclean in libtool" ; \ + (cd libtool && \ $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \ "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \ "RANLIB=$${RANLIB}" \ "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" \ - installcheck) \ + mostlyclean) \ || exit 1 -.PHONY: maybe-installcheck-make installcheck-make -maybe-installcheck-make: +.PHONY: maybe-clean-libtool clean-libtool +maybe-clean-libtool: -installcheck-make: \ - configure-make - @[ -f ./make/Makefile ] || exit 0; \ +clean-libtool: + @[ -f ./libtool/Makefile ] || exit 0; \ r=`${PWD_COMMAND}`; export r; \ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ $(SET_LIB_PATH) \ for flag in $(EXTRA_HOST_FLAGS); do \ eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \ done; \ - echo "Doing installcheck in make" ; \ - (cd make && \ + echo "Doing clean in libtool" ; \ + (cd libtool && \ $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \ "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \ "RANLIB=$${RANLIB}" \ "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" \ - installcheck) \ + clean) \ || exit 1 -.PHONY: maybe-installcheck-mmalloc installcheck-mmalloc -maybe-installcheck-mmalloc: +.PHONY: maybe-distclean-libtool distclean-libtool +maybe-distclean-libtool: -installcheck-mmalloc: \ - configure-mmalloc - @[ -f ./mmalloc/Makefile ] || exit 0; \ +distclean-libtool: + @[ -f ./libtool/Makefile ] || exit 0; \ r=`${PWD_COMMAND}`; export r; \ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ $(SET_LIB_PATH) \ for flag in $(EXTRA_HOST_FLAGS); do \ eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \ done; \ - echo "Doing installcheck in mmalloc" ; \ - (cd mmalloc && \ + echo "Doing distclean in libtool" ; \ + (cd libtool && \ $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \ "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \ "RANLIB=$${RANLIB}" \ "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" \ - installcheck) \ + distclean) \ || exit 1 -.PHONY: maybe-installcheck-patch installcheck-patch -maybe-installcheck-patch: +.PHONY: maybe-maintainer-clean-libtool maintainer-clean-libtool +maybe-maintainer-clean-libtool: -installcheck-patch: \ - configure-patch - @[ -f ./patch/Makefile ] || exit 0; \ +maintainer-clean-libtool: + @[ -f ./libtool/Makefile ] || exit 0; \ r=`${PWD_COMMAND}`; export r; \ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ $(SET_LIB_PATH) \ for flag in $(EXTRA_HOST_FLAGS); do \ eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \ done; \ - echo "Doing installcheck in patch" ; \ - (cd patch && \ + echo "Doing maintainer-clean in libtool" ; \ + (cd libtool && \ $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \ "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \ "RANLIB=$${RANLIB}" \ "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" \ - installcheck) \ + maintainer-clean) \ || exit 1 -.PHONY: maybe-installcheck-perl installcheck-perl -maybe-installcheck-perl: -installcheck-perl: \ - configure-perl - @[ -f ./perl/Makefile ] || exit 0; \ +.PHONY: configure-m4 maybe-configure-m4 +maybe-configure-m4: +configure-m4: + @test ! -f m4/Makefile || exit 0; \ + [ -d m4 ] || mkdir m4; \ r=`${PWD_COMMAND}`; export r; \ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ - $(SET_LIB_PATH) \ - for flag in $(EXTRA_HOST_FLAGS); do \ - eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \ - done; \ - echo "Doing installcheck in perl" ; \ - (cd perl && \ - $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \ - "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \ - "RANLIB=$${RANLIB}" \ - "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" \ - installcheck) \ + CC="$(CC)"; export CC; \ + CFLAGS="$(CFLAGS)"; export CFLAGS; \ + CONFIG_SHELL="$(SHELL)"; export CONFIG_SHELL; \ + CXX="$(CXX)"; export CXX; \ + CXXFLAGS="$(CXXFLAGS)"; export CXXFLAGS; \ + AR="$(AR)"; export AR; \ + AS="$(AS)"; export AS; \ + CC_FOR_BUILD="$(CC_FOR_BUILD)"; export CC_FOR_BUILD; \ + DLLTOOL="$(DLLTOOL)"; export DLLTOOL; \ + LD="$(LD)"; export LD; \ + NM="$(NM)"; export NM; \ + RANLIB="$(RANLIB)"; export RANLIB; \ + WINDRES="$(WINDRES)"; export WINDRES; \ + OBJCOPY="$(OBJCOPY)"; export OBJCOPY; \ + OBJDUMP="$(OBJDUMP)"; export OBJDUMP; \ + echo Configuring in m4; \ + cd m4 || exit 1; \ + case $(srcdir) in \ + \.) \ + srcdiroption="--srcdir=."; \ + libsrcdir=".";; \ + /* | [A-Za-z]:[\\/]*) \ + srcdiroption="--srcdir=$(srcdir)/m4"; \ + libsrcdir="$$s/m4";; \ + *) \ + srcdiroption="--srcdir=../$(srcdir)/m4"; \ + libsrcdir="$$s/m4";; \ + esac; \ + $(SHELL) $${libsrcdir}/configure \ + $(HOST_CONFIGARGS) $${srcdiroption} \ || exit 1 +.PHONY: all-m4 maybe-all-m4 +maybe-all-m4: +all-m4: configure-m4 + @r=`${PWD_COMMAND}`; export r; \ + s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ + $(SET_LIB_PATH) \ + (cd m4 && $(MAKE) $(FLAGS_TO_PASS) all) -.PHONY: maybe-installcheck-prms installcheck-prms -maybe-installcheck-prms: +.PHONY: check-m4 maybe-check-m4 +maybe-check-m4: -installcheck-prms: \ - configure-prms - @[ -f ./prms/Makefile ] || exit 0; \ +check-m4: + @r=`${PWD_COMMAND}`; export r; \ + s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ + $(SET_LIB_PATH) \ + (cd m4 && $(MAKE) $(FLAGS_TO_PASS) check) + + +.PHONY: install-m4 maybe-install-m4 +maybe-install-m4: + +install-m4: installdirs + @r=`${PWD_COMMAND}`; export r; \ + s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ + $(SET_LIB_PATH) \ + (cd m4 && $(MAKE) $(FLAGS_TO_PASS) install) + + +# Other targets (info, dvi, etc.) + +.PHONY: maybe-info-m4 info-m4 +maybe-info-m4: + +info-m4: \ + configure-m4 + @[ -f ./m4/Makefile ] || exit 0; \ r=`${PWD_COMMAND}`; export r; \ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ $(SET_LIB_PATH) \ for flag in $(EXTRA_HOST_FLAGS); do \ eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \ done; \ - echo "Doing installcheck in prms" ; \ - (cd prms && \ + echo "Doing info in m4" ; \ + (cd m4 && \ $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \ "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \ "RANLIB=$${RANLIB}" \ "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" \ - installcheck) \ + info) \ || exit 1 -.PHONY: maybe-installcheck-rcs installcheck-rcs -maybe-installcheck-rcs: +.PHONY: maybe-dvi-m4 dvi-m4 +maybe-dvi-m4: -installcheck-rcs: \ - configure-rcs - @[ -f ./rcs/Makefile ] || exit 0; \ +dvi-m4: \ + configure-m4 + @[ -f ./m4/Makefile ] || exit 0; \ r=`${PWD_COMMAND}`; export r; \ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ $(SET_LIB_PATH) \ for flag in $(EXTRA_HOST_FLAGS); do \ eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \ done; \ - echo "Doing installcheck in rcs" ; \ - (cd rcs && \ + echo "Doing dvi in m4" ; \ + (cd m4 && \ $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \ "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \ "RANLIB=$${RANLIB}" \ "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" \ - installcheck) \ + dvi) \ || exit 1 -.PHONY: maybe-installcheck-readline installcheck-readline -maybe-installcheck-readline: +.PHONY: maybe-TAGS-m4 TAGS-m4 +maybe-TAGS-m4: -installcheck-readline: \ - configure-readline - @[ -f ./readline/Makefile ] || exit 0; \ +TAGS-m4: \ + configure-m4 + @[ -f ./m4/Makefile ] || exit 0; \ r=`${PWD_COMMAND}`; export r; \ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ $(SET_LIB_PATH) \ for flag in $(EXTRA_HOST_FLAGS); do \ eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \ done; \ - echo "Doing installcheck in readline" ; \ - (cd readline && \ + echo "Doing TAGS in m4" ; \ + (cd m4 && \ $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \ "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \ "RANLIB=$${RANLIB}" \ "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" \ - installcheck) \ + TAGS) \ || exit 1 -.PHONY: maybe-installcheck-release installcheck-release -maybe-installcheck-release: +.PHONY: maybe-install-info-m4 install-info-m4 +maybe-install-info-m4: -installcheck-release: \ - configure-release - @[ -f ./release/Makefile ] || exit 0; \ +install-info-m4: \ + configure-m4 \ + info-m4 + @[ -f ./m4/Makefile ] || exit 0; \ r=`${PWD_COMMAND}`; export r; \ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ $(SET_LIB_PATH) \ for flag in $(EXTRA_HOST_FLAGS); do \ eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \ done; \ - echo "Doing installcheck in release" ; \ - (cd release && \ + echo "Doing install-info in m4" ; \ + (cd m4 && \ $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \ "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \ "RANLIB=$${RANLIB}" \ "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" \ - installcheck) \ + install-info) \ || exit 1 -.PHONY: maybe-installcheck-recode installcheck-recode -maybe-installcheck-recode: +.PHONY: maybe-installcheck-m4 installcheck-m4 +maybe-installcheck-m4: -installcheck-recode: \ - configure-recode - @[ -f ./recode/Makefile ] || exit 0; \ +installcheck-m4: \ + configure-m4 + @[ -f ./m4/Makefile ] || exit 0; \ r=`${PWD_COMMAND}`; export r; \ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ $(SET_LIB_PATH) \ for flag in $(EXTRA_HOST_FLAGS); do \ eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \ done; \ - echo "Doing installcheck in recode" ; \ - (cd recode && \ + echo "Doing installcheck in m4" ; \ + (cd m4 && \ $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \ "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \ "RANLIB=$${RANLIB}" \ @@ -9467,218 +11154,263 @@ installcheck-recode: \ || exit 1 -.PHONY: maybe-installcheck-sed installcheck-sed -maybe-installcheck-sed: +.PHONY: maybe-mostlyclean-m4 mostlyclean-m4 +maybe-mostlyclean-m4: -installcheck-sed: \ - configure-sed - @[ -f ./sed/Makefile ] || exit 0; \ +mostlyclean-m4: + @[ -f ./m4/Makefile ] || exit 0; \ r=`${PWD_COMMAND}`; export r; \ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ $(SET_LIB_PATH) \ for flag in $(EXTRA_HOST_FLAGS); do \ eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \ done; \ - echo "Doing installcheck in sed" ; \ - (cd sed && \ + echo "Doing mostlyclean in m4" ; \ + (cd m4 && \ $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \ "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \ "RANLIB=$${RANLIB}" \ "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" \ - installcheck) \ + mostlyclean) \ || exit 1 -.PHONY: maybe-installcheck-send-pr installcheck-send-pr -maybe-installcheck-send-pr: +.PHONY: maybe-clean-m4 clean-m4 +maybe-clean-m4: -installcheck-send-pr: \ - configure-send-pr - @[ -f ./send-pr/Makefile ] || exit 0; \ +clean-m4: + @[ -f ./m4/Makefile ] || exit 0; \ r=`${PWD_COMMAND}`; export r; \ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ $(SET_LIB_PATH) \ for flag in $(EXTRA_HOST_FLAGS); do \ eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \ done; \ - echo "Doing installcheck in send-pr" ; \ - (cd send-pr && \ + echo "Doing clean in m4" ; \ + (cd m4 && \ $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \ "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \ "RANLIB=$${RANLIB}" \ "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" \ - installcheck) \ + clean) \ || exit 1 -.PHONY: maybe-installcheck-shellutils installcheck-shellutils -maybe-installcheck-shellutils: +.PHONY: maybe-distclean-m4 distclean-m4 +maybe-distclean-m4: -installcheck-shellutils: \ - configure-shellutils - @[ -f ./shellutils/Makefile ] || exit 0; \ +distclean-m4: + @[ -f ./m4/Makefile ] || exit 0; \ r=`${PWD_COMMAND}`; export r; \ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ $(SET_LIB_PATH) \ for flag in $(EXTRA_HOST_FLAGS); do \ eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \ done; \ - echo "Doing installcheck in shellutils" ; \ - (cd shellutils && \ + echo "Doing distclean in m4" ; \ + (cd m4 && \ $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \ "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \ "RANLIB=$${RANLIB}" \ "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" \ - installcheck) \ + distclean) \ || exit 1 -.PHONY: maybe-installcheck-sid installcheck-sid -maybe-installcheck-sid: +.PHONY: maybe-maintainer-clean-m4 maintainer-clean-m4 +maybe-maintainer-clean-m4: -installcheck-sid: \ - configure-sid - @[ -f ./sid/Makefile ] || exit 0; \ +maintainer-clean-m4: + @[ -f ./m4/Makefile ] || exit 0; \ r=`${PWD_COMMAND}`; export r; \ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ $(SET_LIB_PATH) \ for flag in $(EXTRA_HOST_FLAGS); do \ eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \ done; \ - echo "Doing installcheck in sid" ; \ - (cd sid && \ + echo "Doing maintainer-clean in m4" ; \ + (cd m4 && \ $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \ "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \ "RANLIB=$${RANLIB}" \ "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" \ - installcheck) \ + maintainer-clean) \ || exit 1 -.PHONY: maybe-installcheck-sim installcheck-sim -maybe-installcheck-sim: -installcheck-sim: \ - configure-sim - @[ -f ./sim/Makefile ] || exit 0; \ +.PHONY: configure-make maybe-configure-make +maybe-configure-make: +configure-make: + @test ! -f make/Makefile || exit 0; \ + [ -d make ] || mkdir make; \ r=`${PWD_COMMAND}`; export r; \ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ - $(SET_LIB_PATH) \ - for flag in $(EXTRA_HOST_FLAGS); do \ - eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \ - done; \ - echo "Doing installcheck in sim" ; \ - (cd sim && \ - $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \ - "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \ - "RANLIB=$${RANLIB}" \ - "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" \ - installcheck) \ + CC="$(CC)"; export CC; \ + CFLAGS="$(CFLAGS)"; export CFLAGS; \ + CONFIG_SHELL="$(SHELL)"; export CONFIG_SHELL; \ + CXX="$(CXX)"; export CXX; \ + CXXFLAGS="$(CXXFLAGS)"; export CXXFLAGS; \ + AR="$(AR)"; export AR; \ + AS="$(AS)"; export AS; \ + CC_FOR_BUILD="$(CC_FOR_BUILD)"; export CC_FOR_BUILD; \ + DLLTOOL="$(DLLTOOL)"; export DLLTOOL; \ + LD="$(LD)"; export LD; \ + NM="$(NM)"; export NM; \ + RANLIB="$(RANLIB)"; export RANLIB; \ + WINDRES="$(WINDRES)"; export WINDRES; \ + OBJCOPY="$(OBJCOPY)"; export OBJCOPY; \ + OBJDUMP="$(OBJDUMP)"; export OBJDUMP; \ + echo Configuring in make; \ + cd make || exit 1; \ + case $(srcdir) in \ + \.) \ + srcdiroption="--srcdir=."; \ + libsrcdir=".";; \ + /* | [A-Za-z]:[\\/]*) \ + srcdiroption="--srcdir=$(srcdir)/make"; \ + libsrcdir="$$s/make";; \ + *) \ + srcdiroption="--srcdir=../$(srcdir)/make"; \ + libsrcdir="$$s/make";; \ + esac; \ + $(SHELL) $${libsrcdir}/configure \ + $(HOST_CONFIGARGS) $${srcdiroption} \ || exit 1 +.PHONY: all-make maybe-all-make +maybe-all-make: +all-make: configure-make + @r=`${PWD_COMMAND}`; export r; \ + s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ + $(SET_LIB_PATH) \ + (cd make && $(MAKE) $(FLAGS_TO_PASS) all) -.PHONY: maybe-installcheck-tar installcheck-tar -maybe-installcheck-tar: +.PHONY: check-make maybe-check-make +maybe-check-make: -installcheck-tar: \ - configure-tar - @[ -f ./tar/Makefile ] || exit 0; \ +check-make: + @r=`${PWD_COMMAND}`; export r; \ + s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ + $(SET_LIB_PATH) \ + (cd make && $(MAKE) $(FLAGS_TO_PASS) check) + + +.PHONY: install-make maybe-install-make +maybe-install-make: + +install-make: installdirs + @r=`${PWD_COMMAND}`; export r; \ + s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ + $(SET_LIB_PATH) \ + (cd make && $(MAKE) $(FLAGS_TO_PASS) install) + + +# Other targets (info, dvi, etc.) + +.PHONY: maybe-info-make info-make +maybe-info-make: + +info-make: \ + configure-make + @[ -f ./make/Makefile ] || exit 0; \ r=`${PWD_COMMAND}`; export r; \ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ $(SET_LIB_PATH) \ for flag in $(EXTRA_HOST_FLAGS); do \ eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \ done; \ - echo "Doing installcheck in tar" ; \ - (cd tar && \ + echo "Doing info in make" ; \ + (cd make && \ $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \ "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \ "RANLIB=$${RANLIB}" \ "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" \ - installcheck) \ + info) \ || exit 1 -.PHONY: maybe-installcheck-texinfo installcheck-texinfo -maybe-installcheck-texinfo: +.PHONY: maybe-dvi-make dvi-make +maybe-dvi-make: -installcheck-texinfo: \ - configure-texinfo - @[ -f ./texinfo/Makefile ] || exit 0; \ +dvi-make: \ + configure-make + @[ -f ./make/Makefile ] || exit 0; \ r=`${PWD_COMMAND}`; export r; \ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ $(SET_LIB_PATH) \ for flag in $(EXTRA_HOST_FLAGS); do \ eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \ done; \ - echo "Doing installcheck in texinfo" ; \ - (cd texinfo && \ + echo "Doing dvi in make" ; \ + (cd make && \ $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \ "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \ "RANLIB=$${RANLIB}" \ "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" \ - installcheck) \ + dvi) \ || exit 1 -.PHONY: maybe-installcheck-textutils installcheck-textutils -maybe-installcheck-textutils: +.PHONY: maybe-TAGS-make TAGS-make +maybe-TAGS-make: -installcheck-textutils: \ - configure-textutils - @[ -f ./textutils/Makefile ] || exit 0; \ +TAGS-make: \ + configure-make + @[ -f ./make/Makefile ] || exit 0; \ r=`${PWD_COMMAND}`; export r; \ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ $(SET_LIB_PATH) \ for flag in $(EXTRA_HOST_FLAGS); do \ eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \ done; \ - echo "Doing installcheck in textutils" ; \ - (cd textutils && \ + echo "Doing TAGS in make" ; \ + (cd make && \ $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \ "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \ "RANLIB=$${RANLIB}" \ "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" \ - installcheck) \ + TAGS) \ || exit 1 -.PHONY: maybe-installcheck-time installcheck-time -maybe-installcheck-time: +.PHONY: maybe-install-info-make install-info-make +maybe-install-info-make: -installcheck-time: \ - configure-time - @[ -f ./time/Makefile ] || exit 0; \ +install-info-make: \ + configure-make \ + info-make + @[ -f ./make/Makefile ] || exit 0; \ r=`${PWD_COMMAND}`; export r; \ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ $(SET_LIB_PATH) \ for flag in $(EXTRA_HOST_FLAGS); do \ eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \ done; \ - echo "Doing installcheck in time" ; \ - (cd time && \ + echo "Doing install-info in make" ; \ + (cd make && \ $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \ "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \ "RANLIB=$${RANLIB}" \ "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" \ - installcheck) \ + install-info) \ || exit 1 -.PHONY: maybe-installcheck-uudecode installcheck-uudecode -maybe-installcheck-uudecode: +.PHONY: maybe-installcheck-make installcheck-make +maybe-installcheck-make: -installcheck-uudecode: \ - configure-uudecode - @[ -f ./uudecode/Makefile ] || exit 0; \ +installcheck-make: \ + configure-make + @[ -f ./make/Makefile ] || exit 0; \ r=`${PWD_COMMAND}`; export r; \ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ $(SET_LIB_PATH) \ for flag in $(EXTRA_HOST_FLAGS); do \ eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \ done; \ - echo "Doing installcheck in uudecode" ; \ - (cd uudecode && \ + echo "Doing installcheck in make" ; \ + (cd make && \ $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \ "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \ "RANLIB=$${RANLIB}" \ @@ -9687,218 +11419,259 @@ installcheck-uudecode: \ || exit 1 -.PHONY: maybe-installcheck-wdiff installcheck-wdiff -maybe-installcheck-wdiff: +.PHONY: maybe-mostlyclean-make mostlyclean-make +maybe-mostlyclean-make: -installcheck-wdiff: \ - configure-wdiff - @[ -f ./wdiff/Makefile ] || exit 0; \ +mostlyclean-make: + @[ -f ./make/Makefile ] || exit 0; \ r=`${PWD_COMMAND}`; export r; \ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ $(SET_LIB_PATH) \ for flag in $(EXTRA_HOST_FLAGS); do \ eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \ done; \ - echo "Doing installcheck in wdiff" ; \ - (cd wdiff && \ + echo "Doing mostlyclean in make" ; \ + (cd make && \ $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \ "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \ "RANLIB=$${RANLIB}" \ "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" \ - installcheck) \ + mostlyclean) \ || exit 1 -.PHONY: maybe-installcheck-zip installcheck-zip -maybe-installcheck-zip: +.PHONY: maybe-clean-make clean-make +maybe-clean-make: -installcheck-zip: \ - configure-zip - @[ -f ./zip/Makefile ] || exit 0; \ +clean-make: + @[ -f ./make/Makefile ] || exit 0; \ r=`${PWD_COMMAND}`; export r; \ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ $(SET_LIB_PATH) \ for flag in $(EXTRA_HOST_FLAGS); do \ eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \ done; \ - echo "Doing installcheck in zip" ; \ - (cd zip && \ + echo "Doing clean in make" ; \ + (cd make && \ $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \ "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \ "RANLIB=$${RANLIB}" \ "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" \ - installcheck) \ + clean) \ || exit 1 -.PHONY: maybe-installcheck-zlib installcheck-zlib -maybe-installcheck-zlib: +.PHONY: maybe-distclean-make distclean-make +maybe-distclean-make: -installcheck-zlib: \ - configure-zlib - @[ -f ./zlib/Makefile ] || exit 0; \ +distclean-make: + @[ -f ./make/Makefile ] || exit 0; \ r=`${PWD_COMMAND}`; export r; \ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ $(SET_LIB_PATH) \ for flag in $(EXTRA_HOST_FLAGS); do \ eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \ done; \ - echo "Doing installcheck in zlib" ; \ - (cd zlib && \ + echo "Doing distclean in make" ; \ + (cd make && \ $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \ "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \ "RANLIB=$${RANLIB}" \ "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" \ - installcheck) \ + distclean) \ || exit 1 -.PHONY: maybe-installcheck-gdb installcheck-gdb -maybe-installcheck-gdb: +.PHONY: maybe-maintainer-clean-make maintainer-clean-make +maybe-maintainer-clean-make: -installcheck-gdb: \ - configure-gdb - @[ -f ./gdb/Makefile ] || exit 0; \ +maintainer-clean-make: + @[ -f ./make/Makefile ] || exit 0; \ r=`${PWD_COMMAND}`; export r; \ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ $(SET_LIB_PATH) \ for flag in $(EXTRA_HOST_FLAGS); do \ eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \ done; \ - echo "Doing installcheck in gdb" ; \ - (cd gdb && \ + echo "Doing maintainer-clean in make" ; \ + (cd make && \ $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \ "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \ "RANLIB=$${RANLIB}" \ "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" \ - installcheck) \ + maintainer-clean) \ || exit 1 -.PHONY: maybe-installcheck-expect installcheck-expect -maybe-installcheck-expect: -installcheck-expect: \ - configure-expect - @[ -f ./expect/Makefile ] || exit 0; \ +.PHONY: configure-mmalloc maybe-configure-mmalloc +maybe-configure-mmalloc: +configure-mmalloc: + @test ! -f mmalloc/Makefile || exit 0; \ + [ -d mmalloc ] || mkdir mmalloc; \ r=`${PWD_COMMAND}`; export r; \ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ - $(SET_LIB_PATH) \ - for flag in $(EXTRA_HOST_FLAGS); do \ - eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \ - done; \ - echo "Doing installcheck in expect" ; \ - (cd expect && \ - $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \ - "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \ - "RANLIB=$${RANLIB}" \ - "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" \ - installcheck) \ + CC="$(CC)"; export CC; \ + CFLAGS="$(CFLAGS)"; export CFLAGS; \ + CONFIG_SHELL="$(SHELL)"; export CONFIG_SHELL; \ + CXX="$(CXX)"; export CXX; \ + CXXFLAGS="$(CXXFLAGS)"; export CXXFLAGS; \ + AR="$(AR)"; export AR; \ + AS="$(AS)"; export AS; \ + CC_FOR_BUILD="$(CC_FOR_BUILD)"; export CC_FOR_BUILD; \ + DLLTOOL="$(DLLTOOL)"; export DLLTOOL; \ + LD="$(LD)"; export LD; \ + NM="$(NM)"; export NM; \ + RANLIB="$(RANLIB)"; export RANLIB; \ + WINDRES="$(WINDRES)"; export WINDRES; \ + OBJCOPY="$(OBJCOPY)"; export OBJCOPY; \ + OBJDUMP="$(OBJDUMP)"; export OBJDUMP; \ + echo Configuring in mmalloc; \ + cd mmalloc || exit 1; \ + case $(srcdir) in \ + \.) \ + srcdiroption="--srcdir=."; \ + libsrcdir=".";; \ + /* | [A-Za-z]:[\\/]*) \ + srcdiroption="--srcdir=$(srcdir)/mmalloc"; \ + libsrcdir="$$s/mmalloc";; \ + *) \ + srcdiroption="--srcdir=../$(srcdir)/mmalloc"; \ + libsrcdir="$$s/mmalloc";; \ + esac; \ + $(SHELL) $${libsrcdir}/configure \ + $(HOST_CONFIGARGS) $${srcdiroption} \ || exit 1 +.PHONY: all-mmalloc maybe-all-mmalloc +maybe-all-mmalloc: +all-mmalloc: configure-mmalloc + @r=`${PWD_COMMAND}`; export r; \ + s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ + $(SET_LIB_PATH) \ + (cd mmalloc && $(MAKE) $(FLAGS_TO_PASS) all) + +.PHONY: check-mmalloc maybe-check-mmalloc +maybe-check-mmalloc: -.PHONY: maybe-installcheck-guile installcheck-guile -maybe-installcheck-guile: +check-mmalloc: -installcheck-guile: \ - configure-guile - @[ -f ./guile/Makefile ] || exit 0; \ + +.PHONY: install-mmalloc maybe-install-mmalloc +maybe-install-mmalloc: + +install-mmalloc: installdirs + @r=`${PWD_COMMAND}`; export r; \ + s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ + $(SET_LIB_PATH) \ + (cd mmalloc && $(MAKE) $(FLAGS_TO_PASS) install) + + +# Other targets (info, dvi, etc.) + +.PHONY: maybe-info-mmalloc info-mmalloc +maybe-info-mmalloc: + +info-mmalloc: \ + configure-mmalloc + @[ -f ./mmalloc/Makefile ] || exit 0; \ r=`${PWD_COMMAND}`; export r; \ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ $(SET_LIB_PATH) \ for flag in $(EXTRA_HOST_FLAGS); do \ eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \ done; \ - echo "Doing installcheck in guile" ; \ - (cd guile && \ + echo "Doing info in mmalloc" ; \ + (cd mmalloc && \ $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \ "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \ "RANLIB=$${RANLIB}" \ "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" \ - installcheck) \ + info) \ || exit 1 -.PHONY: maybe-installcheck-tk installcheck-tk -maybe-installcheck-tk: +.PHONY: maybe-dvi-mmalloc dvi-mmalloc +maybe-dvi-mmalloc: -installcheck-tk: \ - configure-tk - @[ -f ./tk/Makefile ] || exit 0; \ +dvi-mmalloc: \ + configure-mmalloc + @[ -f ./mmalloc/Makefile ] || exit 0; \ r=`${PWD_COMMAND}`; export r; \ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ $(SET_LIB_PATH) \ for flag in $(EXTRA_HOST_FLAGS); do \ eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \ done; \ - echo "Doing installcheck in tk" ; \ - (cd tk && \ + echo "Doing dvi in mmalloc" ; \ + (cd mmalloc && \ $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \ "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \ "RANLIB=$${RANLIB}" \ "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" \ - installcheck) \ + dvi) \ || exit 1 -.PHONY: maybe-installcheck-tix installcheck-tix -maybe-installcheck-tix: +.PHONY: maybe-TAGS-mmalloc TAGS-mmalloc +maybe-TAGS-mmalloc: -installcheck-tix: \ - configure-tix - @[ -f ./tix/Makefile ] || exit 0; \ +TAGS-mmalloc: \ + configure-mmalloc + @[ -f ./mmalloc/Makefile ] || exit 0; \ r=`${PWD_COMMAND}`; export r; \ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ $(SET_LIB_PATH) \ for flag in $(EXTRA_HOST_FLAGS); do \ eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \ done; \ - echo "Doing installcheck in tix" ; \ - (cd tix && \ + echo "Doing TAGS in mmalloc" ; \ + (cd mmalloc && \ $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \ "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \ "RANLIB=$${RANLIB}" \ "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" \ - installcheck) \ + TAGS) \ || exit 1 -.PHONY: maybe-installcheck-libtermcap installcheck-libtermcap -maybe-installcheck-libtermcap: +.PHONY: maybe-install-info-mmalloc install-info-mmalloc +maybe-install-info-mmalloc: -installcheck-libtermcap: \ - configure-libtermcap - @[ -f ./libtermcap/Makefile ] || exit 0; \ +install-info-mmalloc: \ + configure-mmalloc \ + info-mmalloc + @[ -f ./mmalloc/Makefile ] || exit 0; \ r=`${PWD_COMMAND}`; export r; \ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ $(SET_LIB_PATH) \ for flag in $(EXTRA_HOST_FLAGS); do \ eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \ done; \ - echo "Doing installcheck in libtermcap" ; \ - (cd libtermcap && \ + echo "Doing install-info in mmalloc" ; \ + (cd mmalloc && \ $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \ "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \ "RANLIB=$${RANLIB}" \ "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" \ - installcheck) \ + install-info) \ || exit 1 -.PHONY: maybe-installcheck-utils installcheck-utils -maybe-installcheck-utils: +.PHONY: maybe-installcheck-mmalloc installcheck-mmalloc +maybe-installcheck-mmalloc: -installcheck-utils: \ - configure-utils - @[ -f ./utils/Makefile ] || exit 0; \ +installcheck-mmalloc: \ + configure-mmalloc + @[ -f ./mmalloc/Makefile ] || exit 0; \ r=`${PWD_COMMAND}`; export r; \ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ $(SET_LIB_PATH) \ for flag in $(EXTRA_HOST_FLAGS); do \ eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \ done; \ - echo "Doing installcheck in utils" ; \ - (cd utils && \ + echo "Doing installcheck in mmalloc" ; \ + (cd mmalloc && \ $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \ "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \ "RANLIB=$${RANLIB}" \ @@ -9907,265 +11680,263 @@ installcheck-utils: \ || exit 1 +.PHONY: maybe-mostlyclean-mmalloc mostlyclean-mmalloc +maybe-mostlyclean-mmalloc: -# Target modules. - -.PHONY: maybe-installcheck-target-libstdc++-v3 installcheck-target-libstdc++-v3 -maybe-installcheck-target-libstdc++-v3: - -installcheck-target-libstdc++-v3: \ - configure-target-libstdc++-v3 - @[ -f $(TARGET_SUBDIR)/libstdc++-v3/Makefile ] || exit 0 ; \ +mostlyclean-mmalloc: + @[ -f ./mmalloc/Makefile ] || exit 0; \ r=`${PWD_COMMAND}`; export r; \ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ $(SET_LIB_PATH) \ - echo "Doing installcheck in $(TARGET_SUBDIR)/libstdc++-v3" ; \ - for flag in $(EXTRA_TARGET_FLAGS); do \ + for flag in $(EXTRA_HOST_FLAGS); do \ eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \ done; \ - (cd $(TARGET_SUBDIR)/libstdc++-v3 && \ + echo "Doing mostlyclean in mmalloc" ; \ + (cd mmalloc && \ $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \ "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \ "RANLIB=$${RANLIB}" \ "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" \ - installcheck) \ + mostlyclean) \ || exit 1 -.PHONY: maybe-installcheck-target-newlib installcheck-target-newlib -maybe-installcheck-target-newlib: +.PHONY: maybe-clean-mmalloc clean-mmalloc +maybe-clean-mmalloc: -installcheck-target-newlib: \ - configure-target-newlib - @[ -f $(TARGET_SUBDIR)/newlib/Makefile ] || exit 0 ; \ +clean-mmalloc: + @[ -f ./mmalloc/Makefile ] || exit 0; \ r=`${PWD_COMMAND}`; export r; \ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ $(SET_LIB_PATH) \ - echo "Doing installcheck in $(TARGET_SUBDIR)/newlib" ; \ - for flag in $(EXTRA_TARGET_FLAGS); do \ + for flag in $(EXTRA_HOST_FLAGS); do \ eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \ done; \ - (cd $(TARGET_SUBDIR)/newlib && \ + echo "Doing clean in mmalloc" ; \ + (cd mmalloc && \ $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \ "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \ "RANLIB=$${RANLIB}" \ "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" \ - installcheck) \ + clean) \ || exit 1 -.PHONY: maybe-installcheck-target-libf2c installcheck-target-libf2c -maybe-installcheck-target-libf2c: +.PHONY: maybe-distclean-mmalloc distclean-mmalloc +maybe-distclean-mmalloc: -installcheck-target-libf2c: \ - configure-target-libf2c - @[ -f $(TARGET_SUBDIR)/libf2c/Makefile ] || exit 0 ; \ +distclean-mmalloc: + @[ -f ./mmalloc/Makefile ] || exit 0; \ r=`${PWD_COMMAND}`; export r; \ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ $(SET_LIB_PATH) \ - echo "Doing installcheck in $(TARGET_SUBDIR)/libf2c" ; \ - for flag in $(EXTRA_TARGET_FLAGS); do \ + for flag in $(EXTRA_HOST_FLAGS); do \ eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \ done; \ - (cd $(TARGET_SUBDIR)/libf2c && \ + echo "Doing distclean in mmalloc" ; \ + (cd mmalloc && \ $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \ "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \ "RANLIB=$${RANLIB}" \ "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" \ - installcheck) \ + distclean) \ || exit 1 -.PHONY: maybe-installcheck-target-libobjc installcheck-target-libobjc -maybe-installcheck-target-libobjc: +.PHONY: maybe-maintainer-clean-mmalloc maintainer-clean-mmalloc +maybe-maintainer-clean-mmalloc: -installcheck-target-libobjc: \ - configure-target-libobjc - @[ -f $(TARGET_SUBDIR)/libobjc/Makefile ] || exit 0 ; \ +maintainer-clean-mmalloc: + @[ -f ./mmalloc/Makefile ] || exit 0; \ r=`${PWD_COMMAND}`; export r; \ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ $(SET_LIB_PATH) \ - echo "Doing installcheck in $(TARGET_SUBDIR)/libobjc" ; \ - for flag in $(EXTRA_TARGET_FLAGS); do \ + for flag in $(EXTRA_HOST_FLAGS); do \ eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \ done; \ - (cd $(TARGET_SUBDIR)/libobjc && \ + echo "Doing maintainer-clean in mmalloc" ; \ + (cd mmalloc && \ $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \ "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \ "RANLIB=$${RANLIB}" \ "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" \ - installcheck) \ + maintainer-clean) \ || exit 1 -.PHONY: maybe-installcheck-target-libtermcap installcheck-target-libtermcap -maybe-installcheck-target-libtermcap: -installcheck-target-libtermcap: \ - configure-target-libtermcap - @[ -f $(TARGET_SUBDIR)/libtermcap/Makefile ] || exit 0 ; \ +.PHONY: configure-patch maybe-configure-patch +maybe-configure-patch: +configure-patch: + @test ! -f patch/Makefile || exit 0; \ + [ -d patch ] || mkdir patch; \ r=`${PWD_COMMAND}`; export r; \ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ - $(SET_LIB_PATH) \ - echo "Doing installcheck in $(TARGET_SUBDIR)/libtermcap" ; \ - for flag in $(EXTRA_TARGET_FLAGS); do \ - eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \ - done; \ - (cd $(TARGET_SUBDIR)/libtermcap && \ - $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \ - "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \ - "RANLIB=$${RANLIB}" \ - "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" \ - installcheck) \ + CC="$(CC)"; export CC; \ + CFLAGS="$(CFLAGS)"; export CFLAGS; \ + CONFIG_SHELL="$(SHELL)"; export CONFIG_SHELL; \ + CXX="$(CXX)"; export CXX; \ + CXXFLAGS="$(CXXFLAGS)"; export CXXFLAGS; \ + AR="$(AR)"; export AR; \ + AS="$(AS)"; export AS; \ + CC_FOR_BUILD="$(CC_FOR_BUILD)"; export CC_FOR_BUILD; \ + DLLTOOL="$(DLLTOOL)"; export DLLTOOL; \ + LD="$(LD)"; export LD; \ + NM="$(NM)"; export NM; \ + RANLIB="$(RANLIB)"; export RANLIB; \ + WINDRES="$(WINDRES)"; export WINDRES; \ + OBJCOPY="$(OBJCOPY)"; export OBJCOPY; \ + OBJDUMP="$(OBJDUMP)"; export OBJDUMP; \ + echo Configuring in patch; \ + cd patch || exit 1; \ + case $(srcdir) in \ + \.) \ + srcdiroption="--srcdir=."; \ + libsrcdir=".";; \ + /* | [A-Za-z]:[\\/]*) \ + srcdiroption="--srcdir=$(srcdir)/patch"; \ + libsrcdir="$$s/patch";; \ + *) \ + srcdiroption="--srcdir=../$(srcdir)/patch"; \ + libsrcdir="$$s/patch";; \ + esac; \ + $(SHELL) $${libsrcdir}/configure \ + $(HOST_CONFIGARGS) $${srcdiroption} \ || exit 1 +.PHONY: all-patch maybe-all-patch +maybe-all-patch: +all-patch: configure-patch + @r=`${PWD_COMMAND}`; export r; \ + s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ + $(SET_LIB_PATH) \ + (cd patch && $(MAKE) $(FLAGS_TO_PASS) all) -.PHONY: maybe-installcheck-target-winsup installcheck-target-winsup -maybe-installcheck-target-winsup: +.PHONY: check-patch maybe-check-patch +maybe-check-patch: -installcheck-target-winsup: \ - configure-target-winsup - @[ -f $(TARGET_SUBDIR)/winsup/Makefile ] || exit 0 ; \ - r=`${PWD_COMMAND}`; export r; \ +check-patch: + @r=`${PWD_COMMAND}`; export r; \ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ $(SET_LIB_PATH) \ - echo "Doing installcheck in $(TARGET_SUBDIR)/winsup" ; \ - for flag in $(EXTRA_TARGET_FLAGS); do \ - eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \ - done; \ - (cd $(TARGET_SUBDIR)/winsup && \ - $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \ - "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \ - "RANLIB=$${RANLIB}" \ - "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" \ - installcheck) \ - || exit 1 + (cd patch && $(MAKE) $(FLAGS_TO_PASS) check) -.PHONY: maybe-installcheck-target-libgloss installcheck-target-libgloss -maybe-installcheck-target-libgloss: +.PHONY: install-patch maybe-install-patch +maybe-install-patch: -installcheck-target-libgloss: \ - configure-target-libgloss - @[ -f $(TARGET_SUBDIR)/libgloss/Makefile ] || exit 0 ; \ - r=`${PWD_COMMAND}`; export r; \ +install-patch: installdirs + @r=`${PWD_COMMAND}`; export r; \ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ $(SET_LIB_PATH) \ - echo "Doing installcheck in $(TARGET_SUBDIR)/libgloss" ; \ - for flag in $(EXTRA_TARGET_FLAGS); do \ - eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \ - done; \ - (cd $(TARGET_SUBDIR)/libgloss && \ - $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \ - "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \ - "RANLIB=$${RANLIB}" \ - "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" \ - installcheck) \ - || exit 1 + (cd patch && $(MAKE) $(FLAGS_TO_PASS) install) -.PHONY: maybe-installcheck-target-libiberty installcheck-target-libiberty -maybe-installcheck-target-libiberty: +# Other targets (info, dvi, etc.) -installcheck-target-libiberty: \ - configure-target-libiberty - @[ -f $(TARGET_SUBDIR)/libiberty/Makefile ] || exit 0 ; \ +.PHONY: maybe-info-patch info-patch +maybe-info-patch: + +info-patch: \ + configure-patch + @[ -f ./patch/Makefile ] || exit 0; \ r=`${PWD_COMMAND}`; export r; \ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ $(SET_LIB_PATH) \ - echo "Doing installcheck in $(TARGET_SUBDIR)/libiberty" ; \ - for flag in $(EXTRA_TARGET_FLAGS); do \ + for flag in $(EXTRA_HOST_FLAGS); do \ eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \ done; \ - (cd $(TARGET_SUBDIR)/libiberty && \ + echo "Doing info in patch" ; \ + (cd patch && \ $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \ "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \ "RANLIB=$${RANLIB}" \ "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" \ - installcheck) \ + info) \ || exit 1 -.PHONY: maybe-installcheck-target-gperf installcheck-target-gperf -maybe-installcheck-target-gperf: +.PHONY: maybe-dvi-patch dvi-patch +maybe-dvi-patch: -installcheck-target-gperf: \ - configure-target-gperf - @[ -f $(TARGET_SUBDIR)/gperf/Makefile ] || exit 0 ; \ +dvi-patch: \ + configure-patch + @[ -f ./patch/Makefile ] || exit 0; \ r=`${PWD_COMMAND}`; export r; \ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ $(SET_LIB_PATH) \ - echo "Doing installcheck in $(TARGET_SUBDIR)/gperf" ; \ - for flag in $(EXTRA_TARGET_FLAGS); do \ + for flag in $(EXTRA_HOST_FLAGS); do \ eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \ done; \ - (cd $(TARGET_SUBDIR)/gperf && \ + echo "Doing dvi in patch" ; \ + (cd patch && \ $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \ "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \ "RANLIB=$${RANLIB}" \ "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" \ - installcheck) \ + dvi) \ || exit 1 -.PHONY: maybe-installcheck-target-examples installcheck-target-examples -maybe-installcheck-target-examples: +.PHONY: maybe-TAGS-patch TAGS-patch +maybe-TAGS-patch: -installcheck-target-examples: \ - configure-target-examples - @[ -f $(TARGET_SUBDIR)/examples/Makefile ] || exit 0 ; \ +TAGS-patch: \ + configure-patch + @[ -f ./patch/Makefile ] || exit 0; \ r=`${PWD_COMMAND}`; export r; \ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ $(SET_LIB_PATH) \ - echo "Doing installcheck in $(TARGET_SUBDIR)/examples" ; \ - for flag in $(EXTRA_TARGET_FLAGS); do \ + for flag in $(EXTRA_HOST_FLAGS); do \ eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \ done; \ - (cd $(TARGET_SUBDIR)/examples && \ + echo "Doing TAGS in patch" ; \ + (cd patch && \ $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \ "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \ "RANLIB=$${RANLIB}" \ "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" \ - installcheck) \ + TAGS) \ || exit 1 -.PHONY: maybe-installcheck-target-libffi installcheck-target-libffi -maybe-installcheck-target-libffi: +.PHONY: maybe-install-info-patch install-info-patch +maybe-install-info-patch: -installcheck-target-libffi: \ - configure-target-libffi - @[ -f $(TARGET_SUBDIR)/libffi/Makefile ] || exit 0 ; \ +install-info-patch: \ + configure-patch \ + info-patch + @[ -f ./patch/Makefile ] || exit 0; \ r=`${PWD_COMMAND}`; export r; \ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ $(SET_LIB_PATH) \ - echo "Doing installcheck in $(TARGET_SUBDIR)/libffi" ; \ - for flag in $(EXTRA_TARGET_FLAGS); do \ + for flag in $(EXTRA_HOST_FLAGS); do \ eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \ done; \ - (cd $(TARGET_SUBDIR)/libffi && \ + echo "Doing install-info in patch" ; \ + (cd patch && \ $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \ "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \ "RANLIB=$${RANLIB}" \ "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" \ - installcheck) \ + install-info) \ || exit 1 -.PHONY: maybe-installcheck-target-libjava installcheck-target-libjava -maybe-installcheck-target-libjava: +.PHONY: maybe-installcheck-patch installcheck-patch +maybe-installcheck-patch: -installcheck-target-libjava: \ - configure-target-libjava - @[ -f $(TARGET_SUBDIR)/libjava/Makefile ] || exit 0 ; \ +installcheck-patch: \ + configure-patch + @[ -f ./patch/Makefile ] || exit 0; \ r=`${PWD_COMMAND}`; export r; \ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ $(SET_LIB_PATH) \ - echo "Doing installcheck in $(TARGET_SUBDIR)/libjava" ; \ - for flag in $(EXTRA_TARGET_FLAGS); do \ + for flag in $(EXTRA_HOST_FLAGS); do \ eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \ done; \ - (cd $(TARGET_SUBDIR)/libjava && \ + echo "Doing installcheck in patch" ; \ + (cd patch && \ $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \ "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \ "RANLIB=$${RANLIB}" \ @@ -10174,347 +11945,284 @@ installcheck-target-libjava: \ || exit 1 -.PHONY: maybe-installcheck-target-zlib installcheck-target-zlib -maybe-installcheck-target-zlib: +.PHONY: maybe-mostlyclean-patch mostlyclean-patch +maybe-mostlyclean-patch: -installcheck-target-zlib: \ - configure-target-zlib - @[ -f $(TARGET_SUBDIR)/zlib/Makefile ] || exit 0 ; \ +mostlyclean-patch: + @[ -f ./patch/Makefile ] || exit 0; \ r=`${PWD_COMMAND}`; export r; \ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ $(SET_LIB_PATH) \ - echo "Doing installcheck in $(TARGET_SUBDIR)/zlib" ; \ - for flag in $(EXTRA_TARGET_FLAGS); do \ + for flag in $(EXTRA_HOST_FLAGS); do \ eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \ done; \ - (cd $(TARGET_SUBDIR)/zlib && \ + echo "Doing mostlyclean in patch" ; \ + (cd patch && \ $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \ "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \ "RANLIB=$${RANLIB}" \ "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" \ - installcheck) \ + mostlyclean) \ || exit 1 -.PHONY: maybe-installcheck-target-boehm-gc installcheck-target-boehm-gc -maybe-installcheck-target-boehm-gc: +.PHONY: maybe-clean-patch clean-patch +maybe-clean-patch: -installcheck-target-boehm-gc: \ - configure-target-boehm-gc - @[ -f $(TARGET_SUBDIR)/boehm-gc/Makefile ] || exit 0 ; \ +clean-patch: + @[ -f ./patch/Makefile ] || exit 0; \ r=`${PWD_COMMAND}`; export r; \ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ $(SET_LIB_PATH) \ - echo "Doing installcheck in $(TARGET_SUBDIR)/boehm-gc" ; \ - for flag in $(EXTRA_TARGET_FLAGS); do \ + for flag in $(EXTRA_HOST_FLAGS); do \ eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \ done; \ - (cd $(TARGET_SUBDIR)/boehm-gc && \ + echo "Doing clean in patch" ; \ + (cd patch && \ $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \ "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \ "RANLIB=$${RANLIB}" \ "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" \ - installcheck) \ + clean) \ || exit 1 -.PHONY: maybe-installcheck-target-qthreads installcheck-target-qthreads -maybe-installcheck-target-qthreads: +.PHONY: maybe-distclean-patch distclean-patch +maybe-distclean-patch: -installcheck-target-qthreads: \ - configure-target-qthreads - @[ -f $(TARGET_SUBDIR)/qthreads/Makefile ] || exit 0 ; \ +distclean-patch: + @[ -f ./patch/Makefile ] || exit 0; \ r=`${PWD_COMMAND}`; export r; \ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ $(SET_LIB_PATH) \ - echo "Doing installcheck in $(TARGET_SUBDIR)/qthreads" ; \ - for flag in $(EXTRA_TARGET_FLAGS); do \ + for flag in $(EXTRA_HOST_FLAGS); do \ eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \ done; \ - (cd $(TARGET_SUBDIR)/qthreads && \ + echo "Doing distclean in patch" ; \ + (cd patch && \ $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \ "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \ "RANLIB=$${RANLIB}" \ "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" \ - installcheck) \ + distclean) \ || exit 1 -.PHONY: maybe-installcheck-target-rda installcheck-target-rda -maybe-installcheck-target-rda: +.PHONY: maybe-maintainer-clean-patch maintainer-clean-patch +maybe-maintainer-clean-patch: -installcheck-target-rda: \ - configure-target-rda - @[ -f $(TARGET_SUBDIR)/rda/Makefile ] || exit 0 ; \ +maintainer-clean-patch: + @[ -f ./patch/Makefile ] || exit 0; \ r=`${PWD_COMMAND}`; export r; \ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ $(SET_LIB_PATH) \ - echo "Doing installcheck in $(TARGET_SUBDIR)/rda" ; \ - for flag in $(EXTRA_TARGET_FLAGS); do \ + for flag in $(EXTRA_HOST_FLAGS); do \ eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \ done; \ - (cd $(TARGET_SUBDIR)/rda && \ + echo "Doing maintainer-clean in patch" ; \ + (cd patch && \ $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \ "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \ "RANLIB=$${RANLIB}" \ "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" \ - installcheck) \ + maintainer-clean) \ || exit 1 -.PHONY: maybe-installcheck-target-libada installcheck-target-libada -maybe-installcheck-target-libada: -installcheck-target-libada: \ - configure-target-libada - @[ -f $(TARGET_SUBDIR)/libada/Makefile ] || exit 0 ; \ +.PHONY: configure-perl maybe-configure-perl +maybe-configure-perl: +configure-perl: + @test ! -f perl/Makefile || exit 0; \ + [ -d perl ] || mkdir perl; \ r=`${PWD_COMMAND}`; export r; \ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ - $(SET_LIB_PATH) \ - echo "Doing installcheck in $(TARGET_SUBDIR)/libada" ; \ - for flag in $(EXTRA_TARGET_FLAGS); do \ - eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \ - done; \ - (cd $(TARGET_SUBDIR)/libada && \ - $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \ - "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \ - "RANLIB=$${RANLIB}" \ - "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" \ - installcheck) \ + CC="$(CC)"; export CC; \ + CFLAGS="$(CFLAGS)"; export CFLAGS; \ + CONFIG_SHELL="$(SHELL)"; export CONFIG_SHELL; \ + CXX="$(CXX)"; export CXX; \ + CXXFLAGS="$(CXXFLAGS)"; export CXXFLAGS; \ + AR="$(AR)"; export AR; \ + AS="$(AS)"; export AS; \ + CC_FOR_BUILD="$(CC_FOR_BUILD)"; export CC_FOR_BUILD; \ + DLLTOOL="$(DLLTOOL)"; export DLLTOOL; \ + LD="$(LD)"; export LD; \ + NM="$(NM)"; export NM; \ + RANLIB="$(RANLIB)"; export RANLIB; \ + WINDRES="$(WINDRES)"; export WINDRES; \ + OBJCOPY="$(OBJCOPY)"; export OBJCOPY; \ + OBJDUMP="$(OBJDUMP)"; export OBJDUMP; \ + echo Configuring in perl; \ + cd perl || exit 1; \ + case $(srcdir) in \ + \.) \ + srcdiroption="--srcdir=."; \ + libsrcdir=".";; \ + /* | [A-Za-z]:[\\/]*) \ + srcdiroption="--srcdir=$(srcdir)/perl"; \ + libsrcdir="$$s/perl";; \ + *) \ + srcdiroption="--srcdir=../$(srcdir)/perl"; \ + libsrcdir="$$s/perl";; \ + esac; \ + $(SHELL) $${libsrcdir}/configure \ + $(HOST_CONFIGARGS) $${srcdiroption} \ || exit 1 +.PHONY: all-perl maybe-all-perl +maybe-all-perl: +all-perl: configure-perl + @r=`${PWD_COMMAND}`; export r; \ + s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ + $(SET_LIB_PATH) \ + (cd perl && $(MAKE) $(FLAGS_TO_PASS) all) +.PHONY: check-perl maybe-check-perl +maybe-check-perl: -.PHONY: do-mostlyclean -do-mostlyclean: mostlyclean-host mostlyclean-target +check-perl: + @r=`${PWD_COMMAND}`; export r; \ + s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ + $(SET_LIB_PATH) \ + (cd perl && $(MAKE) $(FLAGS_TO_PASS) check) -.PHONY: mostlyclean-host -mostlyclean-host: maybe-mostlyclean-gcc \ - maybe-mostlyclean-ash \ - maybe-mostlyclean-autoconf \ - maybe-mostlyclean-automake \ - maybe-mostlyclean-bash \ - maybe-mostlyclean-bfd \ - maybe-mostlyclean-opcodes \ - maybe-mostlyclean-binutils \ - maybe-mostlyclean-bison \ - maybe-mostlyclean-byacc \ - maybe-mostlyclean-bzip2 \ - maybe-mostlyclean-dejagnu \ - maybe-mostlyclean-diff \ - maybe-mostlyclean-dosutils \ - maybe-mostlyclean-etc \ - maybe-mostlyclean-fastjar \ - maybe-mostlyclean-fileutils \ - maybe-mostlyclean-findutils \ - maybe-mostlyclean-find \ - maybe-mostlyclean-flex \ - maybe-mostlyclean-gas \ - maybe-mostlyclean-gawk \ - maybe-mostlyclean-gettext \ - maybe-mostlyclean-gnuserv \ - maybe-mostlyclean-gprof \ - maybe-mostlyclean-gzip \ - maybe-mostlyclean-hello \ - maybe-mostlyclean-indent \ - maybe-mostlyclean-intl \ - maybe-mostlyclean-tcl \ - maybe-mostlyclean-itcl \ - maybe-mostlyclean-ld \ - maybe-mostlyclean-libgui \ - maybe-mostlyclean-libiberty \ - maybe-mostlyclean-libtool \ - maybe-mostlyclean-m4 \ - maybe-mostlyclean-make \ - maybe-mostlyclean-mmalloc \ - maybe-mostlyclean-patch \ - maybe-mostlyclean-perl \ - maybe-mostlyclean-prms \ - maybe-mostlyclean-rcs \ - maybe-mostlyclean-readline \ - maybe-mostlyclean-release \ - maybe-mostlyclean-recode \ - maybe-mostlyclean-sed \ - maybe-mostlyclean-send-pr \ - maybe-mostlyclean-shellutils \ - maybe-mostlyclean-sid \ - maybe-mostlyclean-sim \ - maybe-mostlyclean-tar \ - maybe-mostlyclean-texinfo \ - maybe-mostlyclean-textutils \ - maybe-mostlyclean-time \ - maybe-mostlyclean-uudecode \ - maybe-mostlyclean-wdiff \ - maybe-mostlyclean-zip \ - maybe-mostlyclean-zlib \ - maybe-mostlyclean-gdb \ - maybe-mostlyclean-expect \ - maybe-mostlyclean-guile \ - maybe-mostlyclean-tk \ - maybe-mostlyclean-tix \ - maybe-mostlyclean-libtermcap \ - maybe-mostlyclean-utils -.PHONY: mostlyclean-target -mostlyclean-target: \ - maybe-mostlyclean-target-libstdc++-v3 \ - maybe-mostlyclean-target-newlib \ - maybe-mostlyclean-target-libf2c \ - maybe-mostlyclean-target-libobjc \ - maybe-mostlyclean-target-libtermcap \ - maybe-mostlyclean-target-winsup \ - maybe-mostlyclean-target-libgloss \ - maybe-mostlyclean-target-libiberty \ - maybe-mostlyclean-target-gperf \ - maybe-mostlyclean-target-examples \ - maybe-mostlyclean-target-libffi \ - maybe-mostlyclean-target-libjava \ - maybe-mostlyclean-target-zlib \ - maybe-mostlyclean-target-boehm-gc \ - maybe-mostlyclean-target-qthreads \ - maybe-mostlyclean-target-rda \ - maybe-mostlyclean-target-libada +.PHONY: install-perl maybe-install-perl +maybe-install-perl: -# GCC, the eternal special case -.PHONY: maybe-mostlyclean-gcc mostlyclean-gcc -maybe-mostlyclean-gcc: -mostlyclean-gcc: - @[ -f ./gcc/Makefile ] || exit 0; \ - r=`${PWD_COMMAND}`; export r; \ +install-perl: installdirs + @r=`${PWD_COMMAND}`; export r; \ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ $(SET_LIB_PATH) \ - for flag in $(EXTRA_GCC_FLAGS); do \ - eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \ - done; \ - echo "Doing mostlyclean in gcc" ; \ - (cd gcc && \ - $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \ - "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \ - "RANLIB=$${RANLIB}" \ - "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" \ - mostlyclean) \ - || exit 1 + (cd perl && $(MAKE) $(FLAGS_TO_PASS) install) -# Host modules. -.PHONY: maybe-mostlyclean-ash mostlyclean-ash -maybe-mostlyclean-ash: +# Other targets (info, dvi, etc.) -mostlyclean-ash: - @[ -f ./ash/Makefile ] || exit 0; \ +.PHONY: maybe-info-perl info-perl +maybe-info-perl: + +info-perl: \ + configure-perl + @[ -f ./perl/Makefile ] || exit 0; \ r=`${PWD_COMMAND}`; export r; \ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ $(SET_LIB_PATH) \ for flag in $(EXTRA_HOST_FLAGS); do \ eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \ done; \ - echo "Doing mostlyclean in ash" ; \ - (cd ash && \ + echo "Doing info in perl" ; \ + (cd perl && \ $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \ "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \ "RANLIB=$${RANLIB}" \ "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" \ - mostlyclean) \ + info) \ || exit 1 -.PHONY: maybe-mostlyclean-autoconf mostlyclean-autoconf -maybe-mostlyclean-autoconf: +.PHONY: maybe-dvi-perl dvi-perl +maybe-dvi-perl: -mostlyclean-autoconf: - @[ -f ./autoconf/Makefile ] || exit 0; \ +dvi-perl: \ + configure-perl + @[ -f ./perl/Makefile ] || exit 0; \ r=`${PWD_COMMAND}`; export r; \ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ $(SET_LIB_PATH) \ for flag in $(EXTRA_HOST_FLAGS); do \ eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \ done; \ - echo "Doing mostlyclean in autoconf" ; \ - (cd autoconf && \ + echo "Doing dvi in perl" ; \ + (cd perl && \ $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \ "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \ "RANLIB=$${RANLIB}" \ "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" \ - mostlyclean) \ + dvi) \ || exit 1 -.PHONY: maybe-mostlyclean-automake mostlyclean-automake -maybe-mostlyclean-automake: +.PHONY: maybe-TAGS-perl TAGS-perl +maybe-TAGS-perl: -mostlyclean-automake: - @[ -f ./automake/Makefile ] || exit 0; \ +TAGS-perl: \ + configure-perl + @[ -f ./perl/Makefile ] || exit 0; \ r=`${PWD_COMMAND}`; export r; \ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ $(SET_LIB_PATH) \ for flag in $(EXTRA_HOST_FLAGS); do \ eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \ done; \ - echo "Doing mostlyclean in automake" ; \ - (cd automake && \ + echo "Doing TAGS in perl" ; \ + (cd perl && \ $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \ "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \ "RANLIB=$${RANLIB}" \ "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" \ - mostlyclean) \ + TAGS) \ || exit 1 -.PHONY: maybe-mostlyclean-bash mostlyclean-bash -maybe-mostlyclean-bash: +.PHONY: maybe-install-info-perl install-info-perl +maybe-install-info-perl: -mostlyclean-bash: - @[ -f ./bash/Makefile ] || exit 0; \ +install-info-perl: \ + configure-perl \ + info-perl + @[ -f ./perl/Makefile ] || exit 0; \ r=`${PWD_COMMAND}`; export r; \ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ $(SET_LIB_PATH) \ for flag in $(EXTRA_HOST_FLAGS); do \ eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \ done; \ - echo "Doing mostlyclean in bash" ; \ - (cd bash && \ + echo "Doing install-info in perl" ; \ + (cd perl && \ $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \ "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \ "RANLIB=$${RANLIB}" \ "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" \ - mostlyclean) \ + install-info) \ || exit 1 -.PHONY: maybe-mostlyclean-bfd mostlyclean-bfd -maybe-mostlyclean-bfd: +.PHONY: maybe-installcheck-perl installcheck-perl +maybe-installcheck-perl: -mostlyclean-bfd: - @[ -f ./bfd/Makefile ] || exit 0; \ +installcheck-perl: \ + configure-perl + @[ -f ./perl/Makefile ] || exit 0; \ r=`${PWD_COMMAND}`; export r; \ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ $(SET_LIB_PATH) \ for flag in $(EXTRA_HOST_FLAGS); do \ eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \ done; \ - echo "Doing mostlyclean in bfd" ; \ - (cd bfd && \ + echo "Doing installcheck in perl" ; \ + (cd perl && \ $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \ "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \ "RANLIB=$${RANLIB}" \ "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" \ - mostlyclean) \ + installcheck) \ || exit 1 -.PHONY: maybe-mostlyclean-opcodes mostlyclean-opcodes -maybe-mostlyclean-opcodes: +.PHONY: maybe-mostlyclean-perl mostlyclean-perl +maybe-mostlyclean-perl: -mostlyclean-opcodes: - @[ -f ./opcodes/Makefile ] || exit 0; \ +mostlyclean-perl: + @[ -f ./perl/Makefile ] || exit 0; \ r=`${PWD_COMMAND}`; export r; \ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ $(SET_LIB_PATH) \ for flag in $(EXTRA_HOST_FLAGS); do \ eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \ done; \ - echo "Doing mostlyclean in opcodes" ; \ - (cd opcodes && \ + echo "Doing mostlyclean in perl" ; \ + (cd perl && \ $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \ "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \ "RANLIB=$${RANLIB}" \ @@ -10523,250 +12231,263 @@ mostlyclean-opcodes: || exit 1 -.PHONY: maybe-mostlyclean-binutils mostlyclean-binutils -maybe-mostlyclean-binutils: +.PHONY: maybe-clean-perl clean-perl +maybe-clean-perl: -mostlyclean-binutils: - @[ -f ./binutils/Makefile ] || exit 0; \ +clean-perl: + @[ -f ./perl/Makefile ] || exit 0; \ r=`${PWD_COMMAND}`; export r; \ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ $(SET_LIB_PATH) \ for flag in $(EXTRA_HOST_FLAGS); do \ eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \ done; \ - echo "Doing mostlyclean in binutils" ; \ - (cd binutils && \ + echo "Doing clean in perl" ; \ + (cd perl && \ $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \ "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \ "RANLIB=$${RANLIB}" \ "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" \ - mostlyclean) \ + clean) \ || exit 1 -.PHONY: maybe-mostlyclean-bison mostlyclean-bison -maybe-mostlyclean-bison: +.PHONY: maybe-distclean-perl distclean-perl +maybe-distclean-perl: -mostlyclean-bison: - @[ -f ./bison/Makefile ] || exit 0; \ +distclean-perl: + @[ -f ./perl/Makefile ] || exit 0; \ r=`${PWD_COMMAND}`; export r; \ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ $(SET_LIB_PATH) \ for flag in $(EXTRA_HOST_FLAGS); do \ eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \ done; \ - echo "Doing mostlyclean in bison" ; \ - (cd bison && \ + echo "Doing distclean in perl" ; \ + (cd perl && \ $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \ "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \ "RANLIB=$${RANLIB}" \ "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" \ - mostlyclean) \ + distclean) \ || exit 1 -.PHONY: maybe-mostlyclean-byacc mostlyclean-byacc -maybe-mostlyclean-byacc: +.PHONY: maybe-maintainer-clean-perl maintainer-clean-perl +maybe-maintainer-clean-perl: -mostlyclean-byacc: - @[ -f ./byacc/Makefile ] || exit 0; \ +maintainer-clean-perl: + @[ -f ./perl/Makefile ] || exit 0; \ r=`${PWD_COMMAND}`; export r; \ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ $(SET_LIB_PATH) \ for flag in $(EXTRA_HOST_FLAGS); do \ eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \ done; \ - echo "Doing mostlyclean in byacc" ; \ - (cd byacc && \ + echo "Doing maintainer-clean in perl" ; \ + (cd perl && \ $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \ "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \ "RANLIB=$${RANLIB}" \ "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" \ - mostlyclean) \ + maintainer-clean) \ || exit 1 -.PHONY: maybe-mostlyclean-bzip2 mostlyclean-bzip2 -maybe-mostlyclean-bzip2: -mostlyclean-bzip2: - @[ -f ./bzip2/Makefile ] || exit 0; \ +.PHONY: configure-prms maybe-configure-prms +maybe-configure-prms: +configure-prms: + @test ! -f prms/Makefile || exit 0; \ + [ -d prms ] || mkdir prms; \ r=`${PWD_COMMAND}`; export r; \ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ - $(SET_LIB_PATH) \ - for flag in $(EXTRA_HOST_FLAGS); do \ - eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \ - done; \ - echo "Doing mostlyclean in bzip2" ; \ - (cd bzip2 && \ - $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \ - "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \ - "RANLIB=$${RANLIB}" \ - "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" \ - mostlyclean) \ + CC="$(CC)"; export CC; \ + CFLAGS="$(CFLAGS)"; export CFLAGS; \ + CONFIG_SHELL="$(SHELL)"; export CONFIG_SHELL; \ + CXX="$(CXX)"; export CXX; \ + CXXFLAGS="$(CXXFLAGS)"; export CXXFLAGS; \ + AR="$(AR)"; export AR; \ + AS="$(AS)"; export AS; \ + CC_FOR_BUILD="$(CC_FOR_BUILD)"; export CC_FOR_BUILD; \ + DLLTOOL="$(DLLTOOL)"; export DLLTOOL; \ + LD="$(LD)"; export LD; \ + NM="$(NM)"; export NM; \ + RANLIB="$(RANLIB)"; export RANLIB; \ + WINDRES="$(WINDRES)"; export WINDRES; \ + OBJCOPY="$(OBJCOPY)"; export OBJCOPY; \ + OBJDUMP="$(OBJDUMP)"; export OBJDUMP; \ + echo Configuring in prms; \ + cd prms || exit 1; \ + case $(srcdir) in \ + \.) \ + srcdiroption="--srcdir=."; \ + libsrcdir=".";; \ + /* | [A-Za-z]:[\\/]*) \ + srcdiroption="--srcdir=$(srcdir)/prms"; \ + libsrcdir="$$s/prms";; \ + *) \ + srcdiroption="--srcdir=../$(srcdir)/prms"; \ + libsrcdir="$$s/prms";; \ + esac; \ + $(SHELL) $${libsrcdir}/configure \ + $(HOST_CONFIGARGS) $${srcdiroption} \ || exit 1 +.PHONY: all-prms maybe-all-prms +maybe-all-prms: +all-prms: configure-prms + @r=`${PWD_COMMAND}`; export r; \ + s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ + $(SET_LIB_PATH) \ + (cd prms && $(MAKE) $(FLAGS_TO_PASS) all) -.PHONY: maybe-mostlyclean-dejagnu mostlyclean-dejagnu -maybe-mostlyclean-dejagnu: +.PHONY: check-prms maybe-check-prms +maybe-check-prms: -mostlyclean-dejagnu: - @[ -f ./dejagnu/Makefile ] || exit 0; \ - r=`${PWD_COMMAND}`; export r; \ +check-prms: + @r=`${PWD_COMMAND}`; export r; \ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ $(SET_LIB_PATH) \ - for flag in $(EXTRA_HOST_FLAGS); do \ - eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \ - done; \ - echo "Doing mostlyclean in dejagnu" ; \ - (cd dejagnu && \ - $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \ - "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \ - "RANLIB=$${RANLIB}" \ - "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" \ - mostlyclean) \ - || exit 1 + (cd prms && $(MAKE) $(FLAGS_TO_PASS) check) -.PHONY: maybe-mostlyclean-diff mostlyclean-diff -maybe-mostlyclean-diff: +.PHONY: install-prms maybe-install-prms +maybe-install-prms: -mostlyclean-diff: - @[ -f ./diff/Makefile ] || exit 0; \ - r=`${PWD_COMMAND}`; export r; \ +install-prms: installdirs + @r=`${PWD_COMMAND}`; export r; \ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ $(SET_LIB_PATH) \ - for flag in $(EXTRA_HOST_FLAGS); do \ - eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \ - done; \ - echo "Doing mostlyclean in diff" ; \ - (cd diff && \ - $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \ - "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \ - "RANLIB=$${RANLIB}" \ - "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" \ - mostlyclean) \ - || exit 1 + (cd prms && $(MAKE) $(FLAGS_TO_PASS) install) -.PHONY: maybe-mostlyclean-dosutils mostlyclean-dosutils -maybe-mostlyclean-dosutils: +# Other targets (info, dvi, etc.) -mostlyclean-dosutils: - @[ -f ./dosutils/Makefile ] || exit 0; \ +.PHONY: maybe-info-prms info-prms +maybe-info-prms: + +info-prms: \ + configure-prms + @[ -f ./prms/Makefile ] || exit 0; \ r=`${PWD_COMMAND}`; export r; \ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ $(SET_LIB_PATH) \ for flag in $(EXTRA_HOST_FLAGS); do \ eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \ done; \ - echo "Doing mostlyclean in dosutils" ; \ - (cd dosutils && \ + echo "Doing info in prms" ; \ + (cd prms && \ $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \ "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \ "RANLIB=$${RANLIB}" \ "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" \ - mostlyclean) \ + info) \ || exit 1 -.PHONY: maybe-mostlyclean-etc mostlyclean-etc -maybe-mostlyclean-etc: +.PHONY: maybe-dvi-prms dvi-prms +maybe-dvi-prms: -mostlyclean-etc: - @[ -f ./etc/Makefile ] || exit 0; \ +dvi-prms: \ + configure-prms + @[ -f ./prms/Makefile ] || exit 0; \ r=`${PWD_COMMAND}`; export r; \ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ $(SET_LIB_PATH) \ for flag in $(EXTRA_HOST_FLAGS); do \ eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \ done; \ - echo "Doing mostlyclean in etc" ; \ - (cd etc && \ + echo "Doing dvi in prms" ; \ + (cd prms && \ $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \ "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \ "RANLIB=$${RANLIB}" \ "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" \ - mostlyclean) \ + dvi) \ || exit 1 -.PHONY: maybe-mostlyclean-fastjar mostlyclean-fastjar -maybe-mostlyclean-fastjar: +.PHONY: maybe-TAGS-prms TAGS-prms +maybe-TAGS-prms: -mostlyclean-fastjar: - @[ -f ./fastjar/Makefile ] || exit 0; \ +TAGS-prms: \ + configure-prms + @[ -f ./prms/Makefile ] || exit 0; \ r=`${PWD_COMMAND}`; export r; \ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ $(SET_LIB_PATH) \ for flag in $(EXTRA_HOST_FLAGS); do \ eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \ done; \ - echo "Doing mostlyclean in fastjar" ; \ - (cd fastjar && \ + echo "Doing TAGS in prms" ; \ + (cd prms && \ $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \ "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \ "RANLIB=$${RANLIB}" \ "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" \ - mostlyclean) \ + TAGS) \ || exit 1 -.PHONY: maybe-mostlyclean-fileutils mostlyclean-fileutils -maybe-mostlyclean-fileutils: +.PHONY: maybe-install-info-prms install-info-prms +maybe-install-info-prms: -mostlyclean-fileutils: - @[ -f ./fileutils/Makefile ] || exit 0; \ +install-info-prms: \ + configure-prms \ + info-prms + @[ -f ./prms/Makefile ] || exit 0; \ r=`${PWD_COMMAND}`; export r; \ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ $(SET_LIB_PATH) \ for flag in $(EXTRA_HOST_FLAGS); do \ eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \ done; \ - echo "Doing mostlyclean in fileutils" ; \ - (cd fileutils && \ + echo "Doing install-info in prms" ; \ + (cd prms && \ $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \ "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \ "RANLIB=$${RANLIB}" \ "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" \ - mostlyclean) \ + install-info) \ || exit 1 -.PHONY: maybe-mostlyclean-findutils mostlyclean-findutils -maybe-mostlyclean-findutils: +.PHONY: maybe-installcheck-prms installcheck-prms +maybe-installcheck-prms: -mostlyclean-findutils: - @[ -f ./findutils/Makefile ] || exit 0; \ +installcheck-prms: \ + configure-prms + @[ -f ./prms/Makefile ] || exit 0; \ r=`${PWD_COMMAND}`; export r; \ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ $(SET_LIB_PATH) \ for flag in $(EXTRA_HOST_FLAGS); do \ eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \ done; \ - echo "Doing mostlyclean in findutils" ; \ - (cd findutils && \ + echo "Doing installcheck in prms" ; \ + (cd prms && \ $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \ "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \ "RANLIB=$${RANLIB}" \ "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" \ - mostlyclean) \ + installcheck) \ || exit 1 -.PHONY: maybe-mostlyclean-find mostlyclean-find -maybe-mostlyclean-find: +.PHONY: maybe-mostlyclean-prms mostlyclean-prms +maybe-mostlyclean-prms: -mostlyclean-find: - @[ -f ./find/Makefile ] || exit 0; \ +mostlyclean-prms: + @[ -f ./prms/Makefile ] || exit 0; \ r=`${PWD_COMMAND}`; export r; \ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ $(SET_LIB_PATH) \ for flag in $(EXTRA_HOST_FLAGS); do \ eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \ done; \ - echo "Doing mostlyclean in find" ; \ - (cd find && \ + echo "Doing mostlyclean in prms" ; \ + (cd prms && \ $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \ "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \ "RANLIB=$${RANLIB}" \ @@ -10775,257 +12496,263 @@ mostlyclean-find: || exit 1 -.PHONY: maybe-mostlyclean-flex mostlyclean-flex -maybe-mostlyclean-flex: +.PHONY: maybe-clean-prms clean-prms +maybe-clean-prms: -mostlyclean-flex: - @[ -f ./flex/Makefile ] || exit 0; \ +clean-prms: + @[ -f ./prms/Makefile ] || exit 0; \ r=`${PWD_COMMAND}`; export r; \ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ $(SET_LIB_PATH) \ for flag in $(EXTRA_HOST_FLAGS); do \ eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \ done; \ - echo "Doing mostlyclean in flex" ; \ - (cd flex && \ + echo "Doing clean in prms" ; \ + (cd prms && \ $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \ "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \ "RANLIB=$${RANLIB}" \ "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" \ - mostlyclean) \ + clean) \ || exit 1 -.PHONY: maybe-mostlyclean-gas mostlyclean-gas -maybe-mostlyclean-gas: +.PHONY: maybe-distclean-prms distclean-prms +maybe-distclean-prms: -mostlyclean-gas: - @[ -f ./gas/Makefile ] || exit 0; \ +distclean-prms: + @[ -f ./prms/Makefile ] || exit 0; \ r=`${PWD_COMMAND}`; export r; \ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ $(SET_LIB_PATH) \ for flag in $(EXTRA_HOST_FLAGS); do \ eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \ done; \ - echo "Doing mostlyclean in gas" ; \ - (cd gas && \ + echo "Doing distclean in prms" ; \ + (cd prms && \ $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \ "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \ "RANLIB=$${RANLIB}" \ "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" \ - mostlyclean) \ + distclean) \ || exit 1 -.PHONY: maybe-mostlyclean-gawk mostlyclean-gawk -maybe-mostlyclean-gawk: +.PHONY: maybe-maintainer-clean-prms maintainer-clean-prms +maybe-maintainer-clean-prms: -mostlyclean-gawk: - @[ -f ./gawk/Makefile ] || exit 0; \ +maintainer-clean-prms: + @[ -f ./prms/Makefile ] || exit 0; \ r=`${PWD_COMMAND}`; export r; \ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ $(SET_LIB_PATH) \ for flag in $(EXTRA_HOST_FLAGS); do \ eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \ done; \ - echo "Doing mostlyclean in gawk" ; \ - (cd gawk && \ + echo "Doing maintainer-clean in prms" ; \ + (cd prms && \ $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \ "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \ "RANLIB=$${RANLIB}" \ "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" \ - mostlyclean) \ + maintainer-clean) \ || exit 1 -.PHONY: maybe-mostlyclean-gettext mostlyclean-gettext -maybe-mostlyclean-gettext: -mostlyclean-gettext: - @[ -f ./gettext/Makefile ] || exit 0; \ +.PHONY: configure-rcs maybe-configure-rcs +maybe-configure-rcs: +configure-rcs: + @test ! -f rcs/Makefile || exit 0; \ + [ -d rcs ] || mkdir rcs; \ r=`${PWD_COMMAND}`; export r; \ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ - $(SET_LIB_PATH) \ - for flag in $(EXTRA_HOST_FLAGS); do \ - eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \ - done; \ - echo "Doing mostlyclean in gettext" ; \ - (cd gettext && \ - $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \ - "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \ - "RANLIB=$${RANLIB}" \ - "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" \ - mostlyclean) \ + CC="$(CC)"; export CC; \ + CFLAGS="$(CFLAGS)"; export CFLAGS; \ + CONFIG_SHELL="$(SHELL)"; export CONFIG_SHELL; \ + CXX="$(CXX)"; export CXX; \ + CXXFLAGS="$(CXXFLAGS)"; export CXXFLAGS; \ + AR="$(AR)"; export AR; \ + AS="$(AS)"; export AS; \ + CC_FOR_BUILD="$(CC_FOR_BUILD)"; export CC_FOR_BUILD; \ + DLLTOOL="$(DLLTOOL)"; export DLLTOOL; \ + LD="$(LD)"; export LD; \ + NM="$(NM)"; export NM; \ + RANLIB="$(RANLIB)"; export RANLIB; \ + WINDRES="$(WINDRES)"; export WINDRES; \ + OBJCOPY="$(OBJCOPY)"; export OBJCOPY; \ + OBJDUMP="$(OBJDUMP)"; export OBJDUMP; \ + echo Configuring in rcs; \ + cd rcs || exit 1; \ + case $(srcdir) in \ + \.) \ + srcdiroption="--srcdir=."; \ + libsrcdir=".";; \ + /* | [A-Za-z]:[\\/]*) \ + srcdiroption="--srcdir=$(srcdir)/rcs"; \ + libsrcdir="$$s/rcs";; \ + *) \ + srcdiroption="--srcdir=../$(srcdir)/rcs"; \ + libsrcdir="$$s/rcs";; \ + esac; \ + $(SHELL) $${libsrcdir}/configure \ + $(HOST_CONFIGARGS) $${srcdiroption} \ || exit 1 +.PHONY: all-rcs maybe-all-rcs +maybe-all-rcs: +all-rcs: configure-rcs + @r=`${PWD_COMMAND}`; export r; \ + s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ + $(SET_LIB_PATH) \ + (cd rcs && $(MAKE) $(FLAGS_TO_PASS) all) -.PHONY: maybe-mostlyclean-gnuserv mostlyclean-gnuserv -maybe-mostlyclean-gnuserv: +.PHONY: check-rcs maybe-check-rcs +maybe-check-rcs: -mostlyclean-gnuserv: - @[ -f ./gnuserv/Makefile ] || exit 0; \ - r=`${PWD_COMMAND}`; export r; \ +check-rcs: + @r=`${PWD_COMMAND}`; export r; \ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ $(SET_LIB_PATH) \ - for flag in $(EXTRA_HOST_FLAGS); do \ - eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \ - done; \ - echo "Doing mostlyclean in gnuserv" ; \ - (cd gnuserv && \ - $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \ - "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \ - "RANLIB=$${RANLIB}" \ - "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" \ - mostlyclean) \ - || exit 1 + (cd rcs && $(MAKE) $(FLAGS_TO_PASS) check) -.PHONY: maybe-mostlyclean-gprof mostlyclean-gprof -maybe-mostlyclean-gprof: +.PHONY: install-rcs maybe-install-rcs +maybe-install-rcs: -mostlyclean-gprof: - @[ -f ./gprof/Makefile ] || exit 0; \ - r=`${PWD_COMMAND}`; export r; \ +install-rcs: installdirs + @r=`${PWD_COMMAND}`; export r; \ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ $(SET_LIB_PATH) \ - for flag in $(EXTRA_HOST_FLAGS); do \ - eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \ - done; \ - echo "Doing mostlyclean in gprof" ; \ - (cd gprof && \ - $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \ - "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \ - "RANLIB=$${RANLIB}" \ - "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" \ - mostlyclean) \ - || exit 1 + (cd rcs && $(MAKE) $(FLAGS_TO_PASS) install) -.PHONY: maybe-mostlyclean-gzip mostlyclean-gzip -maybe-mostlyclean-gzip: +# Other targets (info, dvi, etc.) -mostlyclean-gzip: - @[ -f ./gzip/Makefile ] || exit 0; \ +.PHONY: maybe-info-rcs info-rcs +maybe-info-rcs: + +info-rcs: \ + configure-rcs + @[ -f ./rcs/Makefile ] || exit 0; \ r=`${PWD_COMMAND}`; export r; \ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ $(SET_LIB_PATH) \ for flag in $(EXTRA_HOST_FLAGS); do \ eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \ done; \ - echo "Doing mostlyclean in gzip" ; \ - (cd gzip && \ + echo "Doing info in rcs" ; \ + (cd rcs && \ $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \ "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \ "RANLIB=$${RANLIB}" \ "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" \ - mostlyclean) \ + info) \ || exit 1 -.PHONY: maybe-mostlyclean-hello mostlyclean-hello -maybe-mostlyclean-hello: +.PHONY: maybe-dvi-rcs dvi-rcs +maybe-dvi-rcs: -mostlyclean-hello: - @[ -f ./hello/Makefile ] || exit 0; \ +dvi-rcs: \ + configure-rcs + @[ -f ./rcs/Makefile ] || exit 0; \ r=`${PWD_COMMAND}`; export r; \ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ $(SET_LIB_PATH) \ for flag in $(EXTRA_HOST_FLAGS); do \ eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \ done; \ - echo "Doing mostlyclean in hello" ; \ - (cd hello && \ + echo "Doing dvi in rcs" ; \ + (cd rcs && \ $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \ "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \ "RANLIB=$${RANLIB}" \ "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" \ - mostlyclean) \ + dvi) \ || exit 1 -.PHONY: maybe-mostlyclean-indent mostlyclean-indent -maybe-mostlyclean-indent: +.PHONY: maybe-TAGS-rcs TAGS-rcs +maybe-TAGS-rcs: -mostlyclean-indent: - @[ -f ./indent/Makefile ] || exit 0; \ +TAGS-rcs: \ + configure-rcs + @[ -f ./rcs/Makefile ] || exit 0; \ r=`${PWD_COMMAND}`; export r; \ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ $(SET_LIB_PATH) \ for flag in $(EXTRA_HOST_FLAGS); do \ eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \ done; \ - echo "Doing mostlyclean in indent" ; \ - (cd indent && \ + echo "Doing TAGS in rcs" ; \ + (cd rcs && \ $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \ "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \ "RANLIB=$${RANLIB}" \ "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" \ - mostlyclean) \ + TAGS) \ || exit 1 -.PHONY: maybe-mostlyclean-intl mostlyclean-intl -maybe-mostlyclean-intl: +.PHONY: maybe-install-info-rcs install-info-rcs +maybe-install-info-rcs: -mostlyclean-intl: - @[ -f ./intl/Makefile ] || exit 0; \ +install-info-rcs: \ + configure-rcs \ + info-rcs + @[ -f ./rcs/Makefile ] || exit 0; \ r=`${PWD_COMMAND}`; export r; \ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ $(SET_LIB_PATH) \ for flag in $(EXTRA_HOST_FLAGS); do \ eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \ done; \ - echo "Doing mostlyclean in intl" ; \ - (cd intl && \ + echo "Doing install-info in rcs" ; \ + (cd rcs && \ $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \ "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \ "RANLIB=$${RANLIB}" \ "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" \ - mostlyclean) \ + install-info) \ || exit 1 -.PHONY: maybe-mostlyclean-tcl mostlyclean-tcl -maybe-mostlyclean-tcl: - -# tcl doesn't support mostlyclean. -mostlyclean-tcl: - - -.PHONY: maybe-mostlyclean-itcl mostlyclean-itcl -maybe-mostlyclean-itcl: +.PHONY: maybe-installcheck-rcs installcheck-rcs +maybe-installcheck-rcs: -mostlyclean-itcl: - @[ -f ./itcl/Makefile ] || exit 0; \ +installcheck-rcs: \ + configure-rcs + @[ -f ./rcs/Makefile ] || exit 0; \ r=`${PWD_COMMAND}`; export r; \ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ $(SET_LIB_PATH) \ for flag in $(EXTRA_HOST_FLAGS); do \ eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \ done; \ - echo "Doing mostlyclean in itcl" ; \ - (cd itcl && \ + echo "Doing installcheck in rcs" ; \ + (cd rcs && \ $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \ "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \ "RANLIB=$${RANLIB}" \ "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" \ - mostlyclean) \ + installcheck) \ || exit 1 -.PHONY: maybe-mostlyclean-ld mostlyclean-ld -maybe-mostlyclean-ld: +.PHONY: maybe-mostlyclean-rcs mostlyclean-rcs +maybe-mostlyclean-rcs: -mostlyclean-ld: - @[ -f ./ld/Makefile ] || exit 0; \ +mostlyclean-rcs: + @[ -f ./rcs/Makefile ] || exit 0; \ r=`${PWD_COMMAND}`; export r; \ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ $(SET_LIB_PATH) \ for flag in $(EXTRA_HOST_FLAGS); do \ eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \ done; \ - echo "Doing mostlyclean in ld" ; \ - (cd ld && \ + echo "Doing mostlyclean in rcs" ; \ + (cd rcs && \ $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \ "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \ "RANLIB=$${RANLIB}" \ @@ -11034,213 +12761,247 @@ mostlyclean-ld: || exit 1 -.PHONY: maybe-mostlyclean-libgui mostlyclean-libgui -maybe-mostlyclean-libgui: +.PHONY: maybe-clean-rcs clean-rcs +maybe-clean-rcs: -mostlyclean-libgui: - @[ -f ./libgui/Makefile ] || exit 0; \ +clean-rcs: + @[ -f ./rcs/Makefile ] || exit 0; \ r=`${PWD_COMMAND}`; export r; \ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ $(SET_LIB_PATH) \ for flag in $(EXTRA_HOST_FLAGS); do \ eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \ done; \ - echo "Doing mostlyclean in libgui" ; \ - (cd libgui && \ + echo "Doing clean in rcs" ; \ + (cd rcs && \ $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \ "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \ "RANLIB=$${RANLIB}" \ "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" \ - mostlyclean) \ + clean) \ || exit 1 -.PHONY: maybe-mostlyclean-libiberty mostlyclean-libiberty -maybe-mostlyclean-libiberty: +.PHONY: maybe-distclean-rcs distclean-rcs +maybe-distclean-rcs: -mostlyclean-libiberty: - @[ -f ./libiberty/Makefile ] || exit 0; \ +distclean-rcs: + @[ -f ./rcs/Makefile ] || exit 0; \ r=`${PWD_COMMAND}`; export r; \ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ $(SET_LIB_PATH) \ for flag in $(EXTRA_HOST_FLAGS); do \ eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \ done; \ - echo "Doing mostlyclean in libiberty" ; \ - (cd libiberty && \ + echo "Doing distclean in rcs" ; \ + (cd rcs && \ $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \ "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \ "RANLIB=$${RANLIB}" \ "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" \ - mostlyclean) \ + distclean) \ || exit 1 -.PHONY: maybe-mostlyclean-libtool mostlyclean-libtool -maybe-mostlyclean-libtool: +.PHONY: maybe-maintainer-clean-rcs maintainer-clean-rcs +maybe-maintainer-clean-rcs: -mostlyclean-libtool: - @[ -f ./libtool/Makefile ] || exit 0; \ +maintainer-clean-rcs: + @[ -f ./rcs/Makefile ] || exit 0; \ r=`${PWD_COMMAND}`; export r; \ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ $(SET_LIB_PATH) \ for flag in $(EXTRA_HOST_FLAGS); do \ eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \ done; \ - echo "Doing mostlyclean in libtool" ; \ - (cd libtool && \ + echo "Doing maintainer-clean in rcs" ; \ + (cd rcs && \ $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \ "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \ "RANLIB=$${RANLIB}" \ "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" \ - mostlyclean) \ + maintainer-clean) \ || exit 1 -.PHONY: maybe-mostlyclean-m4 mostlyclean-m4 -maybe-mostlyclean-m4: -mostlyclean-m4: - @[ -f ./m4/Makefile ] || exit 0; \ +.PHONY: configure-readline maybe-configure-readline +maybe-configure-readline: +configure-readline: + @test ! -f readline/Makefile || exit 0; \ + [ -d readline ] || mkdir readline; \ r=`${PWD_COMMAND}`; export r; \ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ - $(SET_LIB_PATH) \ - for flag in $(EXTRA_HOST_FLAGS); do \ - eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \ - done; \ - echo "Doing mostlyclean in m4" ; \ - (cd m4 && \ - $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \ - "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \ - "RANLIB=$${RANLIB}" \ - "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" \ - mostlyclean) \ + CC="$(CC)"; export CC; \ + CFLAGS="$(CFLAGS)"; export CFLAGS; \ + CONFIG_SHELL="$(SHELL)"; export CONFIG_SHELL; \ + CXX="$(CXX)"; export CXX; \ + CXXFLAGS="$(CXXFLAGS)"; export CXXFLAGS; \ + AR="$(AR)"; export AR; \ + AS="$(AS)"; export AS; \ + CC_FOR_BUILD="$(CC_FOR_BUILD)"; export CC_FOR_BUILD; \ + DLLTOOL="$(DLLTOOL)"; export DLLTOOL; \ + LD="$(LD)"; export LD; \ + NM="$(NM)"; export NM; \ + RANLIB="$(RANLIB)"; export RANLIB; \ + WINDRES="$(WINDRES)"; export WINDRES; \ + OBJCOPY="$(OBJCOPY)"; export OBJCOPY; \ + OBJDUMP="$(OBJDUMP)"; export OBJDUMP; \ + echo Configuring in readline; \ + cd readline || exit 1; \ + case $(srcdir) in \ + \.) \ + srcdiroption="--srcdir=."; \ + libsrcdir=".";; \ + /* | [A-Za-z]:[\\/]*) \ + srcdiroption="--srcdir=$(srcdir)/readline"; \ + libsrcdir="$$s/readline";; \ + *) \ + srcdiroption="--srcdir=../$(srcdir)/readline"; \ + libsrcdir="$$s/readline";; \ + esac; \ + $(SHELL) $${libsrcdir}/configure \ + $(HOST_CONFIGARGS) $${srcdiroption} \ || exit 1 +.PHONY: all-readline maybe-all-readline +maybe-all-readline: +all-readline: configure-readline + @r=`${PWD_COMMAND}`; export r; \ + s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ + $(SET_LIB_PATH) \ + (cd readline && $(MAKE) $(FLAGS_TO_PASS) all) -.PHONY: maybe-mostlyclean-make mostlyclean-make -maybe-mostlyclean-make: +.PHONY: check-readline maybe-check-readline +maybe-check-readline: -mostlyclean-make: - @[ -f ./make/Makefile ] || exit 0; \ - r=`${PWD_COMMAND}`; export r; \ +check-readline: + @r=`${PWD_COMMAND}`; export r; \ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ $(SET_LIB_PATH) \ - for flag in $(EXTRA_HOST_FLAGS); do \ - eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \ - done; \ - echo "Doing mostlyclean in make" ; \ - (cd make && \ - $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \ - "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \ - "RANLIB=$${RANLIB}" \ - "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" \ - mostlyclean) \ - || exit 1 + (cd readline && $(MAKE) $(FLAGS_TO_PASS) check) -.PHONY: maybe-mostlyclean-mmalloc mostlyclean-mmalloc -maybe-mostlyclean-mmalloc: +.PHONY: install-readline maybe-install-readline +maybe-install-readline: -mostlyclean-mmalloc: - @[ -f ./mmalloc/Makefile ] || exit 0; \ +install-readline: installdirs + @r=`${PWD_COMMAND}`; export r; \ + s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ + $(SET_LIB_PATH) \ + (cd readline && $(MAKE) $(FLAGS_TO_PASS) install) + + +# Other targets (info, dvi, etc.) + +.PHONY: maybe-info-readline info-readline +maybe-info-readline: + +info-readline: \ + configure-readline + @[ -f ./readline/Makefile ] || exit 0; \ r=`${PWD_COMMAND}`; export r; \ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ $(SET_LIB_PATH) \ for flag in $(EXTRA_HOST_FLAGS); do \ eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \ done; \ - echo "Doing mostlyclean in mmalloc" ; \ - (cd mmalloc && \ + echo "Doing info in readline" ; \ + (cd readline && \ $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \ "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \ "RANLIB=$${RANLIB}" \ "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" \ - mostlyclean) \ + info) \ || exit 1 -.PHONY: maybe-mostlyclean-patch mostlyclean-patch -maybe-mostlyclean-patch: +.PHONY: maybe-dvi-readline dvi-readline +maybe-dvi-readline: -mostlyclean-patch: - @[ -f ./patch/Makefile ] || exit 0; \ +dvi-readline: \ + configure-readline + @[ -f ./readline/Makefile ] || exit 0; \ r=`${PWD_COMMAND}`; export r; \ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ $(SET_LIB_PATH) \ for flag in $(EXTRA_HOST_FLAGS); do \ eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \ done; \ - echo "Doing mostlyclean in patch" ; \ - (cd patch && \ + echo "Doing dvi in readline" ; \ + (cd readline && \ $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \ "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \ "RANLIB=$${RANLIB}" \ "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" \ - mostlyclean) \ + dvi) \ || exit 1 -.PHONY: maybe-mostlyclean-perl mostlyclean-perl -maybe-mostlyclean-perl: +.PHONY: maybe-TAGS-readline TAGS-readline +maybe-TAGS-readline: -mostlyclean-perl: - @[ -f ./perl/Makefile ] || exit 0; \ +TAGS-readline: \ + configure-readline + @[ -f ./readline/Makefile ] || exit 0; \ r=`${PWD_COMMAND}`; export r; \ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ $(SET_LIB_PATH) \ for flag in $(EXTRA_HOST_FLAGS); do \ eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \ done; \ - echo "Doing mostlyclean in perl" ; \ - (cd perl && \ + echo "Doing TAGS in readline" ; \ + (cd readline && \ $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \ "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \ "RANLIB=$${RANLIB}" \ "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" \ - mostlyclean) \ + TAGS) \ || exit 1 -.PHONY: maybe-mostlyclean-prms mostlyclean-prms -maybe-mostlyclean-prms: +.PHONY: maybe-install-info-readline install-info-readline +maybe-install-info-readline: -mostlyclean-prms: - @[ -f ./prms/Makefile ] || exit 0; \ +install-info-readline: \ + configure-readline \ + info-readline + @[ -f ./readline/Makefile ] || exit 0; \ r=`${PWD_COMMAND}`; export r; \ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ $(SET_LIB_PATH) \ for flag in $(EXTRA_HOST_FLAGS); do \ eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \ done; \ - echo "Doing mostlyclean in prms" ; \ - (cd prms && \ + echo "Doing install-info in readline" ; \ + (cd readline && \ $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \ "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \ "RANLIB=$${RANLIB}" \ "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" \ - mostlyclean) \ + install-info) \ || exit 1 -.PHONY: maybe-mostlyclean-rcs mostlyclean-rcs -maybe-mostlyclean-rcs: +.PHONY: maybe-installcheck-readline installcheck-readline +maybe-installcheck-readline: -mostlyclean-rcs: - @[ -f ./rcs/Makefile ] || exit 0; \ +installcheck-readline: \ + configure-readline + @[ -f ./readline/Makefile ] || exit 0; \ r=`${PWD_COMMAND}`; export r; \ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ $(SET_LIB_PATH) \ for flag in $(EXTRA_HOST_FLAGS); do \ eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \ done; \ - echo "Doing mostlyclean in rcs" ; \ - (cd rcs && \ + echo "Doing installcheck in readline" ; \ + (cd readline && \ $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \ "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \ "RANLIB=$${RANLIB}" \ "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" \ - mostlyclean) \ + installcheck) \ || exit 1 @@ -11265,208 +13026,255 @@ mostlyclean-readline: || exit 1 -.PHONY: maybe-mostlyclean-release mostlyclean-release -maybe-mostlyclean-release: +.PHONY: maybe-clean-readline clean-readline +maybe-clean-readline: -mostlyclean-release: - @[ -f ./release/Makefile ] || exit 0; \ +clean-readline: + @[ -f ./readline/Makefile ] || exit 0; \ r=`${PWD_COMMAND}`; export r; \ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ $(SET_LIB_PATH) \ for flag in $(EXTRA_HOST_FLAGS); do \ eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \ done; \ - echo "Doing mostlyclean in release" ; \ - (cd release && \ + echo "Doing clean in readline" ; \ + (cd readline && \ $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \ "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \ "RANLIB=$${RANLIB}" \ "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" \ - mostlyclean) \ + clean) \ || exit 1 -.PHONY: maybe-mostlyclean-recode mostlyclean-recode -maybe-mostlyclean-recode: +.PHONY: maybe-distclean-readline distclean-readline +maybe-distclean-readline: -mostlyclean-recode: - @[ -f ./recode/Makefile ] || exit 0; \ +distclean-readline: + @[ -f ./readline/Makefile ] || exit 0; \ r=`${PWD_COMMAND}`; export r; \ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ $(SET_LIB_PATH) \ for flag in $(EXTRA_HOST_FLAGS); do \ eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \ done; \ - echo "Doing mostlyclean in recode" ; \ - (cd recode && \ + echo "Doing distclean in readline" ; \ + (cd readline && \ $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \ "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \ "RANLIB=$${RANLIB}" \ "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" \ - mostlyclean) \ + distclean) \ || exit 1 -.PHONY: maybe-mostlyclean-sed mostlyclean-sed -maybe-mostlyclean-sed: +.PHONY: maybe-maintainer-clean-readline maintainer-clean-readline +maybe-maintainer-clean-readline: -mostlyclean-sed: - @[ -f ./sed/Makefile ] || exit 0; \ +maintainer-clean-readline: + @[ -f ./readline/Makefile ] || exit 0; \ r=`${PWD_COMMAND}`; export r; \ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ $(SET_LIB_PATH) \ for flag in $(EXTRA_HOST_FLAGS); do \ eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \ done; \ - echo "Doing mostlyclean in sed" ; \ - (cd sed && \ + echo "Doing maintainer-clean in readline" ; \ + (cd readline && \ $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \ "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \ "RANLIB=$${RANLIB}" \ "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" \ - mostlyclean) \ + maintainer-clean) \ || exit 1 -.PHONY: maybe-mostlyclean-send-pr mostlyclean-send-pr -maybe-mostlyclean-send-pr: -mostlyclean-send-pr: - @[ -f ./send-pr/Makefile ] || exit 0; \ +.PHONY: configure-release maybe-configure-release +maybe-configure-release: +configure-release: + @test ! -f release/Makefile || exit 0; \ + [ -d release ] || mkdir release; \ r=`${PWD_COMMAND}`; export r; \ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ - $(SET_LIB_PATH) \ - for flag in $(EXTRA_HOST_FLAGS); do \ - eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \ - done; \ - echo "Doing mostlyclean in send-pr" ; \ - (cd send-pr && \ - $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \ - "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \ - "RANLIB=$${RANLIB}" \ - "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" \ - mostlyclean) \ + CC="$(CC)"; export CC; \ + CFLAGS="$(CFLAGS)"; export CFLAGS; \ + CONFIG_SHELL="$(SHELL)"; export CONFIG_SHELL; \ + CXX="$(CXX)"; export CXX; \ + CXXFLAGS="$(CXXFLAGS)"; export CXXFLAGS; \ + AR="$(AR)"; export AR; \ + AS="$(AS)"; export AS; \ + CC_FOR_BUILD="$(CC_FOR_BUILD)"; export CC_FOR_BUILD; \ + DLLTOOL="$(DLLTOOL)"; export DLLTOOL; \ + LD="$(LD)"; export LD; \ + NM="$(NM)"; export NM; \ + RANLIB="$(RANLIB)"; export RANLIB; \ + WINDRES="$(WINDRES)"; export WINDRES; \ + OBJCOPY="$(OBJCOPY)"; export OBJCOPY; \ + OBJDUMP="$(OBJDUMP)"; export OBJDUMP; \ + echo Configuring in release; \ + cd release || exit 1; \ + case $(srcdir) in \ + \.) \ + srcdiroption="--srcdir=."; \ + libsrcdir=".";; \ + /* | [A-Za-z]:[\\/]*) \ + srcdiroption="--srcdir=$(srcdir)/release"; \ + libsrcdir="$$s/release";; \ + *) \ + srcdiroption="--srcdir=../$(srcdir)/release"; \ + libsrcdir="$$s/release";; \ + esac; \ + $(SHELL) $${libsrcdir}/configure \ + $(HOST_CONFIGARGS) $${srcdiroption} \ || exit 1 +.PHONY: all-release maybe-all-release +maybe-all-release: +all-release: configure-release + @r=`${PWD_COMMAND}`; export r; \ + s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ + $(SET_LIB_PATH) \ + (cd release && $(MAKE) $(FLAGS_TO_PASS) all) + +.PHONY: check-release maybe-check-release +maybe-check-release: -.PHONY: maybe-mostlyclean-shellutils mostlyclean-shellutils -maybe-mostlyclean-shellutils: +check-release: -mostlyclean-shellutils: - @[ -f ./shellutils/Makefile ] || exit 0; \ + +.PHONY: install-release maybe-install-release +maybe-install-release: + +install-release: + + +# Other targets (info, dvi, etc.) + +.PHONY: maybe-info-release info-release +maybe-info-release: + +info-release: \ + configure-release + @[ -f ./release/Makefile ] || exit 0; \ r=`${PWD_COMMAND}`; export r; \ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ $(SET_LIB_PATH) \ for flag in $(EXTRA_HOST_FLAGS); do \ eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \ done; \ - echo "Doing mostlyclean in shellutils" ; \ - (cd shellutils && \ + echo "Doing info in release" ; \ + (cd release && \ $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \ "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \ "RANLIB=$${RANLIB}" \ "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" \ - mostlyclean) \ + info) \ || exit 1 -.PHONY: maybe-mostlyclean-sid mostlyclean-sid -maybe-mostlyclean-sid: +.PHONY: maybe-dvi-release dvi-release +maybe-dvi-release: -mostlyclean-sid: - @[ -f ./sid/Makefile ] || exit 0; \ +dvi-release: \ + configure-release + @[ -f ./release/Makefile ] || exit 0; \ r=`${PWD_COMMAND}`; export r; \ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ $(SET_LIB_PATH) \ for flag in $(EXTRA_HOST_FLAGS); do \ eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \ done; \ - echo "Doing mostlyclean in sid" ; \ - (cd sid && \ + echo "Doing dvi in release" ; \ + (cd release && \ $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \ "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \ "RANLIB=$${RANLIB}" \ "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" \ - mostlyclean) \ + dvi) \ || exit 1 -.PHONY: maybe-mostlyclean-sim mostlyclean-sim -maybe-mostlyclean-sim: +.PHONY: maybe-TAGS-release TAGS-release +maybe-TAGS-release: -mostlyclean-sim: - @[ -f ./sim/Makefile ] || exit 0; \ +TAGS-release: \ + configure-release + @[ -f ./release/Makefile ] || exit 0; \ r=`${PWD_COMMAND}`; export r; \ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ $(SET_LIB_PATH) \ for flag in $(EXTRA_HOST_FLAGS); do \ eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \ done; \ - echo "Doing mostlyclean in sim" ; \ - (cd sim && \ + echo "Doing TAGS in release" ; \ + (cd release && \ $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \ "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \ "RANLIB=$${RANLIB}" \ "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" \ - mostlyclean) \ + TAGS) \ || exit 1 -.PHONY: maybe-mostlyclean-tar mostlyclean-tar -maybe-mostlyclean-tar: +.PHONY: maybe-install-info-release install-info-release +maybe-install-info-release: -mostlyclean-tar: - @[ -f ./tar/Makefile ] || exit 0; \ +install-info-release: \ + configure-release \ + info-release + @[ -f ./release/Makefile ] || exit 0; \ r=`${PWD_COMMAND}`; export r; \ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ $(SET_LIB_PATH) \ for flag in $(EXTRA_HOST_FLAGS); do \ eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \ done; \ - echo "Doing mostlyclean in tar" ; \ - (cd tar && \ + echo "Doing install-info in release" ; \ + (cd release && \ $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \ "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \ "RANLIB=$${RANLIB}" \ "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" \ - mostlyclean) \ + install-info) \ || exit 1 -.PHONY: maybe-mostlyclean-texinfo mostlyclean-texinfo -maybe-mostlyclean-texinfo: +.PHONY: maybe-installcheck-release installcheck-release +maybe-installcheck-release: -mostlyclean-texinfo: - @[ -f ./texinfo/Makefile ] || exit 0; \ +installcheck-release: \ + configure-release + @[ -f ./release/Makefile ] || exit 0; \ r=`${PWD_COMMAND}`; export r; \ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ $(SET_LIB_PATH) \ for flag in $(EXTRA_HOST_FLAGS); do \ eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \ done; \ - echo "Doing mostlyclean in texinfo" ; \ - (cd texinfo && \ + echo "Doing installcheck in release" ; \ + (cd release && \ $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \ "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \ "RANLIB=$${RANLIB}" \ "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" \ - mostlyclean) \ + installcheck) \ || exit 1 -.PHONY: maybe-mostlyclean-textutils mostlyclean-textutils -maybe-mostlyclean-textutils: +.PHONY: maybe-mostlyclean-release mostlyclean-release +maybe-mostlyclean-release: -mostlyclean-textutils: - @[ -f ./textutils/Makefile ] || exit 0; \ +mostlyclean-release: + @[ -f ./release/Makefile ] || exit 0; \ r=`${PWD_COMMAND}`; export r; \ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ $(SET_LIB_PATH) \ for flag in $(EXTRA_HOST_FLAGS); do \ eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \ done; \ - echo "Doing mostlyclean in textutils" ; \ - (cd textutils && \ + echo "Doing mostlyclean in release" ; \ + (cd release && \ $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \ "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \ "RANLIB=$${RANLIB}" \ @@ -11475,236 +13283,263 @@ mostlyclean-textutils: || exit 1 -.PHONY: maybe-mostlyclean-time mostlyclean-time -maybe-mostlyclean-time: +.PHONY: maybe-clean-release clean-release +maybe-clean-release: -mostlyclean-time: - @[ -f ./time/Makefile ] || exit 0; \ +clean-release: + @[ -f ./release/Makefile ] || exit 0; \ r=`${PWD_COMMAND}`; export r; \ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ $(SET_LIB_PATH) \ for flag in $(EXTRA_HOST_FLAGS); do \ eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \ done; \ - echo "Doing mostlyclean in time" ; \ - (cd time && \ + echo "Doing clean in release" ; \ + (cd release && \ $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \ "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \ "RANLIB=$${RANLIB}" \ "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" \ - mostlyclean) \ + clean) \ || exit 1 -.PHONY: maybe-mostlyclean-uudecode mostlyclean-uudecode -maybe-mostlyclean-uudecode: +.PHONY: maybe-distclean-release distclean-release +maybe-distclean-release: -mostlyclean-uudecode: - @[ -f ./uudecode/Makefile ] || exit 0; \ +distclean-release: + @[ -f ./release/Makefile ] || exit 0; \ r=`${PWD_COMMAND}`; export r; \ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ $(SET_LIB_PATH) \ for flag in $(EXTRA_HOST_FLAGS); do \ eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \ done; \ - echo "Doing mostlyclean in uudecode" ; \ - (cd uudecode && \ + echo "Doing distclean in release" ; \ + (cd release && \ $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \ "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \ "RANLIB=$${RANLIB}" \ "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" \ - mostlyclean) \ + distclean) \ || exit 1 -.PHONY: maybe-mostlyclean-wdiff mostlyclean-wdiff -maybe-mostlyclean-wdiff: +.PHONY: maybe-maintainer-clean-release maintainer-clean-release +maybe-maintainer-clean-release: -mostlyclean-wdiff: - @[ -f ./wdiff/Makefile ] || exit 0; \ +maintainer-clean-release: + @[ -f ./release/Makefile ] || exit 0; \ r=`${PWD_COMMAND}`; export r; \ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ $(SET_LIB_PATH) \ for flag in $(EXTRA_HOST_FLAGS); do \ eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \ done; \ - echo "Doing mostlyclean in wdiff" ; \ - (cd wdiff && \ + echo "Doing maintainer-clean in release" ; \ + (cd release && \ $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \ "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \ "RANLIB=$${RANLIB}" \ "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" \ - mostlyclean) \ + maintainer-clean) \ || exit 1 -.PHONY: maybe-mostlyclean-zip mostlyclean-zip -maybe-mostlyclean-zip: -mostlyclean-zip: - @[ -f ./zip/Makefile ] || exit 0; \ +.PHONY: configure-recode maybe-configure-recode +maybe-configure-recode: +configure-recode: + @test ! -f recode/Makefile || exit 0; \ + [ -d recode ] || mkdir recode; \ r=`${PWD_COMMAND}`; export r; \ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ - $(SET_LIB_PATH) \ - for flag in $(EXTRA_HOST_FLAGS); do \ - eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \ - done; \ - echo "Doing mostlyclean in zip" ; \ - (cd zip && \ - $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \ - "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \ - "RANLIB=$${RANLIB}" \ - "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" \ - mostlyclean) \ + CC="$(CC)"; export CC; \ + CFLAGS="$(CFLAGS)"; export CFLAGS; \ + CONFIG_SHELL="$(SHELL)"; export CONFIG_SHELL; \ + CXX="$(CXX)"; export CXX; \ + CXXFLAGS="$(CXXFLAGS)"; export CXXFLAGS; \ + AR="$(AR)"; export AR; \ + AS="$(AS)"; export AS; \ + CC_FOR_BUILD="$(CC_FOR_BUILD)"; export CC_FOR_BUILD; \ + DLLTOOL="$(DLLTOOL)"; export DLLTOOL; \ + LD="$(LD)"; export LD; \ + NM="$(NM)"; export NM; \ + RANLIB="$(RANLIB)"; export RANLIB; \ + WINDRES="$(WINDRES)"; export WINDRES; \ + OBJCOPY="$(OBJCOPY)"; export OBJCOPY; \ + OBJDUMP="$(OBJDUMP)"; export OBJDUMP; \ + echo Configuring in recode; \ + cd recode || exit 1; \ + case $(srcdir) in \ + \.) \ + srcdiroption="--srcdir=."; \ + libsrcdir=".";; \ + /* | [A-Za-z]:[\\/]*) \ + srcdiroption="--srcdir=$(srcdir)/recode"; \ + libsrcdir="$$s/recode";; \ + *) \ + srcdiroption="--srcdir=../$(srcdir)/recode"; \ + libsrcdir="$$s/recode";; \ + esac; \ + $(SHELL) $${libsrcdir}/configure \ + $(HOST_CONFIGARGS) $${srcdiroption} \ || exit 1 +.PHONY: all-recode maybe-all-recode +maybe-all-recode: +all-recode: configure-recode + @r=`${PWD_COMMAND}`; export r; \ + s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ + $(SET_LIB_PATH) \ + (cd recode && $(MAKE) $(FLAGS_TO_PASS) all) -.PHONY: maybe-mostlyclean-zlib mostlyclean-zlib -maybe-mostlyclean-zlib: +.PHONY: check-recode maybe-check-recode +maybe-check-recode: -mostlyclean-zlib: - @[ -f ./zlib/Makefile ] || exit 0; \ - r=`${PWD_COMMAND}`; export r; \ +check-recode: + @r=`${PWD_COMMAND}`; export r; \ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ $(SET_LIB_PATH) \ - for flag in $(EXTRA_HOST_FLAGS); do \ - eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \ - done; \ - echo "Doing mostlyclean in zlib" ; \ - (cd zlib && \ - $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \ - "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \ - "RANLIB=$${RANLIB}" \ - "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" \ - mostlyclean) \ - || exit 1 + (cd recode && $(MAKE) $(FLAGS_TO_PASS) check) -.PHONY: maybe-mostlyclean-gdb mostlyclean-gdb -maybe-mostlyclean-gdb: +.PHONY: install-recode maybe-install-recode +maybe-install-recode: -mostlyclean-gdb: - @[ -f ./gdb/Makefile ] || exit 0; \ +install-recode: installdirs + @r=`${PWD_COMMAND}`; export r; \ + s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ + $(SET_LIB_PATH) \ + (cd recode && $(MAKE) $(FLAGS_TO_PASS) install) + + +# Other targets (info, dvi, etc.) + +.PHONY: maybe-info-recode info-recode +maybe-info-recode: + +info-recode: \ + configure-recode + @[ -f ./recode/Makefile ] || exit 0; \ r=`${PWD_COMMAND}`; export r; \ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ $(SET_LIB_PATH) \ for flag in $(EXTRA_HOST_FLAGS); do \ eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \ done; \ - echo "Doing mostlyclean in gdb" ; \ - (cd gdb && \ + echo "Doing info in recode" ; \ + (cd recode && \ $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \ "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \ "RANLIB=$${RANLIB}" \ "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" \ - mostlyclean) \ + info) \ || exit 1 -.PHONY: maybe-mostlyclean-expect mostlyclean-expect -maybe-mostlyclean-expect: +.PHONY: maybe-dvi-recode dvi-recode +maybe-dvi-recode: -mostlyclean-expect: - @[ -f ./expect/Makefile ] || exit 0; \ +dvi-recode: \ + configure-recode + @[ -f ./recode/Makefile ] || exit 0; \ r=`${PWD_COMMAND}`; export r; \ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ $(SET_LIB_PATH) \ for flag in $(EXTRA_HOST_FLAGS); do \ eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \ done; \ - echo "Doing mostlyclean in expect" ; \ - (cd expect && \ + echo "Doing dvi in recode" ; \ + (cd recode && \ $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \ "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \ "RANLIB=$${RANLIB}" \ "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" \ - mostlyclean) \ + dvi) \ || exit 1 -.PHONY: maybe-mostlyclean-guile mostlyclean-guile -maybe-mostlyclean-guile: +.PHONY: maybe-TAGS-recode TAGS-recode +maybe-TAGS-recode: -mostlyclean-guile: - @[ -f ./guile/Makefile ] || exit 0; \ +TAGS-recode: \ + configure-recode + @[ -f ./recode/Makefile ] || exit 0; \ r=`${PWD_COMMAND}`; export r; \ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ $(SET_LIB_PATH) \ for flag in $(EXTRA_HOST_FLAGS); do \ eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \ done; \ - echo "Doing mostlyclean in guile" ; \ - (cd guile && \ + echo "Doing TAGS in recode" ; \ + (cd recode && \ $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \ "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \ "RANLIB=$${RANLIB}" \ "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" \ - mostlyclean) \ + TAGS) \ || exit 1 -.PHONY: maybe-mostlyclean-tk mostlyclean-tk -maybe-mostlyclean-tk: +.PHONY: maybe-install-info-recode install-info-recode +maybe-install-info-recode: -mostlyclean-tk: - @[ -f ./tk/Makefile ] || exit 0; \ +install-info-recode: \ + configure-recode \ + info-recode + @[ -f ./recode/Makefile ] || exit 0; \ r=`${PWD_COMMAND}`; export r; \ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ $(SET_LIB_PATH) \ for flag in $(EXTRA_HOST_FLAGS); do \ eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \ done; \ - echo "Doing mostlyclean in tk" ; \ - (cd tk && \ + echo "Doing install-info in recode" ; \ + (cd recode && \ $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \ "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \ "RANLIB=$${RANLIB}" \ "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" \ - mostlyclean) \ + install-info) \ || exit 1 -.PHONY: maybe-mostlyclean-tix mostlyclean-tix -maybe-mostlyclean-tix: +.PHONY: maybe-installcheck-recode installcheck-recode +maybe-installcheck-recode: -mostlyclean-tix: - @[ -f ./tix/Makefile ] || exit 0; \ +installcheck-recode: \ + configure-recode + @[ -f ./recode/Makefile ] || exit 0; \ r=`${PWD_COMMAND}`; export r; \ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ $(SET_LIB_PATH) \ for flag in $(EXTRA_HOST_FLAGS); do \ eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \ done; \ - echo "Doing mostlyclean in tix" ; \ - (cd tix && \ + echo "Doing installcheck in recode" ; \ + (cd recode && \ $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \ "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \ "RANLIB=$${RANLIB}" \ "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" \ - mostlyclean) \ + installcheck) \ || exit 1 -.PHONY: maybe-mostlyclean-libtermcap mostlyclean-libtermcap -maybe-mostlyclean-libtermcap: - -# libtermcap doesn't support mostlyclean. -mostlyclean-libtermcap: - - -.PHONY: maybe-mostlyclean-utils mostlyclean-utils -maybe-mostlyclean-utils: +.PHONY: maybe-mostlyclean-recode mostlyclean-recode +maybe-mostlyclean-recode: -mostlyclean-utils: - @[ -f ./utils/Makefile ] || exit 0; \ +mostlyclean-recode: + @[ -f ./recode/Makefile ] || exit 0; \ r=`${PWD_COMMAND}`; export r; \ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ $(SET_LIB_PATH) \ for flag in $(EXTRA_HOST_FLAGS); do \ eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \ done; \ - echo "Doing mostlyclean in utils" ; \ - (cd utils && \ + echo "Doing mostlyclean in recode" ; \ + (cd recode && \ $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \ "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \ "RANLIB=$${RANLIB}" \ @@ -11713,239 +13548,263 @@ mostlyclean-utils: || exit 1 +.PHONY: maybe-clean-recode clean-recode +maybe-clean-recode: -# Target modules. - -.PHONY: maybe-mostlyclean-target-libstdc++-v3 mostlyclean-target-libstdc++-v3 -maybe-mostlyclean-target-libstdc++-v3: - -mostlyclean-target-libstdc++-v3: - @[ -f $(TARGET_SUBDIR)/libstdc++-v3/Makefile ] || exit 0 ; \ +clean-recode: + @[ -f ./recode/Makefile ] || exit 0; \ r=`${PWD_COMMAND}`; export r; \ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ $(SET_LIB_PATH) \ - echo "Doing mostlyclean in $(TARGET_SUBDIR)/libstdc++-v3" ; \ - for flag in $(EXTRA_TARGET_FLAGS); do \ + for flag in $(EXTRA_HOST_FLAGS); do \ eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \ done; \ - (cd $(TARGET_SUBDIR)/libstdc++-v3 && \ + echo "Doing clean in recode" ; \ + (cd recode && \ $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \ "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \ "RANLIB=$${RANLIB}" \ "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" \ - mostlyclean) \ + clean) \ || exit 1 -.PHONY: maybe-mostlyclean-target-newlib mostlyclean-target-newlib -maybe-mostlyclean-target-newlib: +.PHONY: maybe-distclean-recode distclean-recode +maybe-distclean-recode: -mostlyclean-target-newlib: - @[ -f $(TARGET_SUBDIR)/newlib/Makefile ] || exit 0 ; \ +distclean-recode: + @[ -f ./recode/Makefile ] || exit 0; \ r=`${PWD_COMMAND}`; export r; \ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ $(SET_LIB_PATH) \ - echo "Doing mostlyclean in $(TARGET_SUBDIR)/newlib" ; \ - for flag in $(EXTRA_TARGET_FLAGS); do \ + for flag in $(EXTRA_HOST_FLAGS); do \ eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \ done; \ - (cd $(TARGET_SUBDIR)/newlib && \ + echo "Doing distclean in recode" ; \ + (cd recode && \ $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \ "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \ "RANLIB=$${RANLIB}" \ "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" \ - mostlyclean) \ + distclean) \ || exit 1 -.PHONY: maybe-mostlyclean-target-libf2c mostlyclean-target-libf2c -maybe-mostlyclean-target-libf2c: +.PHONY: maybe-maintainer-clean-recode maintainer-clean-recode +maybe-maintainer-clean-recode: -mostlyclean-target-libf2c: - @[ -f $(TARGET_SUBDIR)/libf2c/Makefile ] || exit 0 ; \ +maintainer-clean-recode: + @[ -f ./recode/Makefile ] || exit 0; \ r=`${PWD_COMMAND}`; export r; \ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ $(SET_LIB_PATH) \ - echo "Doing mostlyclean in $(TARGET_SUBDIR)/libf2c" ; \ - for flag in $(EXTRA_TARGET_FLAGS); do \ + for flag in $(EXTRA_HOST_FLAGS); do \ eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \ done; \ - (cd $(TARGET_SUBDIR)/libf2c && \ + echo "Doing maintainer-clean in recode" ; \ + (cd recode && \ $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \ "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \ "RANLIB=$${RANLIB}" \ "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" \ - mostlyclean) \ + maintainer-clean) \ || exit 1 -.PHONY: maybe-mostlyclean-target-libobjc mostlyclean-target-libobjc -maybe-mostlyclean-target-libobjc: -mostlyclean-target-libobjc: - @[ -f $(TARGET_SUBDIR)/libobjc/Makefile ] || exit 0 ; \ +.PHONY: configure-sed maybe-configure-sed +maybe-configure-sed: +configure-sed: + @test ! -f sed/Makefile || exit 0; \ + [ -d sed ] || mkdir sed; \ r=`${PWD_COMMAND}`; export r; \ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ - $(SET_LIB_PATH) \ - echo "Doing mostlyclean in $(TARGET_SUBDIR)/libobjc" ; \ - for flag in $(EXTRA_TARGET_FLAGS); do \ - eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \ - done; \ - (cd $(TARGET_SUBDIR)/libobjc && \ - $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \ - "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \ - "RANLIB=$${RANLIB}" \ - "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" \ - mostlyclean) \ + CC="$(CC)"; export CC; \ + CFLAGS="$(CFLAGS)"; export CFLAGS; \ + CONFIG_SHELL="$(SHELL)"; export CONFIG_SHELL; \ + CXX="$(CXX)"; export CXX; \ + CXXFLAGS="$(CXXFLAGS)"; export CXXFLAGS; \ + AR="$(AR)"; export AR; \ + AS="$(AS)"; export AS; \ + CC_FOR_BUILD="$(CC_FOR_BUILD)"; export CC_FOR_BUILD; \ + DLLTOOL="$(DLLTOOL)"; export DLLTOOL; \ + LD="$(LD)"; export LD; \ + NM="$(NM)"; export NM; \ + RANLIB="$(RANLIB)"; export RANLIB; \ + WINDRES="$(WINDRES)"; export WINDRES; \ + OBJCOPY="$(OBJCOPY)"; export OBJCOPY; \ + OBJDUMP="$(OBJDUMP)"; export OBJDUMP; \ + echo Configuring in sed; \ + cd sed || exit 1; \ + case $(srcdir) in \ + \.) \ + srcdiroption="--srcdir=."; \ + libsrcdir=".";; \ + /* | [A-Za-z]:[\\/]*) \ + srcdiroption="--srcdir=$(srcdir)/sed"; \ + libsrcdir="$$s/sed";; \ + *) \ + srcdiroption="--srcdir=../$(srcdir)/sed"; \ + libsrcdir="$$s/sed";; \ + esac; \ + $(SHELL) $${libsrcdir}/configure \ + $(HOST_CONFIGARGS) $${srcdiroption} \ || exit 1 +.PHONY: all-sed maybe-all-sed +maybe-all-sed: +all-sed: configure-sed + @r=`${PWD_COMMAND}`; export r; \ + s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ + $(SET_LIB_PATH) \ + (cd sed && $(MAKE) $(FLAGS_TO_PASS) all) -.PHONY: maybe-mostlyclean-target-libtermcap mostlyclean-target-libtermcap -maybe-mostlyclean-target-libtermcap: +.PHONY: check-sed maybe-check-sed +maybe-check-sed: -# libtermcap doesn't support mostlyclean. -mostlyclean-target-libtermcap: +check-sed: + @r=`${PWD_COMMAND}`; export r; \ + s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ + $(SET_LIB_PATH) \ + (cd sed && $(MAKE) $(FLAGS_TO_PASS) check) -.PHONY: maybe-mostlyclean-target-winsup mostlyclean-target-winsup -maybe-mostlyclean-target-winsup: +.PHONY: install-sed maybe-install-sed +maybe-install-sed: -mostlyclean-target-winsup: - @[ -f $(TARGET_SUBDIR)/winsup/Makefile ] || exit 0 ; \ - r=`${PWD_COMMAND}`; export r; \ +install-sed: installdirs + @r=`${PWD_COMMAND}`; export r; \ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ $(SET_LIB_PATH) \ - echo "Doing mostlyclean in $(TARGET_SUBDIR)/winsup" ; \ - for flag in $(EXTRA_TARGET_FLAGS); do \ - eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \ - done; \ - (cd $(TARGET_SUBDIR)/winsup && \ - $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \ - "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \ - "RANLIB=$${RANLIB}" \ - "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" \ - mostlyclean) \ - || exit 1 + (cd sed && $(MAKE) $(FLAGS_TO_PASS) install) -.PHONY: maybe-mostlyclean-target-libgloss mostlyclean-target-libgloss -maybe-mostlyclean-target-libgloss: +# Other targets (info, dvi, etc.) -mostlyclean-target-libgloss: - @[ -f $(TARGET_SUBDIR)/libgloss/Makefile ] || exit 0 ; \ +.PHONY: maybe-info-sed info-sed +maybe-info-sed: + +info-sed: \ + configure-sed + @[ -f ./sed/Makefile ] || exit 0; \ r=`${PWD_COMMAND}`; export r; \ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ $(SET_LIB_PATH) \ - echo "Doing mostlyclean in $(TARGET_SUBDIR)/libgloss" ; \ - for flag in $(EXTRA_TARGET_FLAGS); do \ + for flag in $(EXTRA_HOST_FLAGS); do \ eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \ done; \ - (cd $(TARGET_SUBDIR)/libgloss && \ + echo "Doing info in sed" ; \ + (cd sed && \ $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \ "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \ "RANLIB=$${RANLIB}" \ "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" \ - mostlyclean) \ + info) \ || exit 1 -.PHONY: maybe-mostlyclean-target-libiberty mostlyclean-target-libiberty -maybe-mostlyclean-target-libiberty: +.PHONY: maybe-dvi-sed dvi-sed +maybe-dvi-sed: -mostlyclean-target-libiberty: - @[ -f $(TARGET_SUBDIR)/libiberty/Makefile ] || exit 0 ; \ +dvi-sed: \ + configure-sed + @[ -f ./sed/Makefile ] || exit 0; \ r=`${PWD_COMMAND}`; export r; \ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ $(SET_LIB_PATH) \ - echo "Doing mostlyclean in $(TARGET_SUBDIR)/libiberty" ; \ - for flag in $(EXTRA_TARGET_FLAGS); do \ + for flag in $(EXTRA_HOST_FLAGS); do \ eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \ done; \ - (cd $(TARGET_SUBDIR)/libiberty && \ + echo "Doing dvi in sed" ; \ + (cd sed && \ $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \ "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \ "RANLIB=$${RANLIB}" \ "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" \ - mostlyclean) \ + dvi) \ || exit 1 -.PHONY: maybe-mostlyclean-target-gperf mostlyclean-target-gperf -maybe-mostlyclean-target-gperf: +.PHONY: maybe-TAGS-sed TAGS-sed +maybe-TAGS-sed: -mostlyclean-target-gperf: - @[ -f $(TARGET_SUBDIR)/gperf/Makefile ] || exit 0 ; \ +TAGS-sed: \ + configure-sed + @[ -f ./sed/Makefile ] || exit 0; \ r=`${PWD_COMMAND}`; export r; \ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ $(SET_LIB_PATH) \ - echo "Doing mostlyclean in $(TARGET_SUBDIR)/gperf" ; \ - for flag in $(EXTRA_TARGET_FLAGS); do \ + for flag in $(EXTRA_HOST_FLAGS); do \ eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \ done; \ - (cd $(TARGET_SUBDIR)/gperf && \ + echo "Doing TAGS in sed" ; \ + (cd sed && \ $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \ "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \ "RANLIB=$${RANLIB}" \ "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" \ - mostlyclean) \ + TAGS) \ || exit 1 -.PHONY: maybe-mostlyclean-target-examples mostlyclean-target-examples -maybe-mostlyclean-target-examples: +.PHONY: maybe-install-info-sed install-info-sed +maybe-install-info-sed: -mostlyclean-target-examples: - @[ -f $(TARGET_SUBDIR)/examples/Makefile ] || exit 0 ; \ +install-info-sed: \ + configure-sed \ + info-sed + @[ -f ./sed/Makefile ] || exit 0; \ r=`${PWD_COMMAND}`; export r; \ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ $(SET_LIB_PATH) \ - echo "Doing mostlyclean in $(TARGET_SUBDIR)/examples" ; \ - for flag in $(EXTRA_TARGET_FLAGS); do \ + for flag in $(EXTRA_HOST_FLAGS); do \ eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \ done; \ - (cd $(TARGET_SUBDIR)/examples && \ + echo "Doing install-info in sed" ; \ + (cd sed && \ $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \ "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \ "RANLIB=$${RANLIB}" \ "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" \ - mostlyclean) \ + install-info) \ || exit 1 -.PHONY: maybe-mostlyclean-target-libffi mostlyclean-target-libffi -maybe-mostlyclean-target-libffi: +.PHONY: maybe-installcheck-sed installcheck-sed +maybe-installcheck-sed: -mostlyclean-target-libffi: - @[ -f $(TARGET_SUBDIR)/libffi/Makefile ] || exit 0 ; \ +installcheck-sed: \ + configure-sed + @[ -f ./sed/Makefile ] || exit 0; \ r=`${PWD_COMMAND}`; export r; \ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ $(SET_LIB_PATH) \ - echo "Doing mostlyclean in $(TARGET_SUBDIR)/libffi" ; \ - for flag in $(EXTRA_TARGET_FLAGS); do \ + for flag in $(EXTRA_HOST_FLAGS); do \ eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \ done; \ - (cd $(TARGET_SUBDIR)/libffi && \ + echo "Doing installcheck in sed" ; \ + (cd sed && \ $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \ "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \ "RANLIB=$${RANLIB}" \ "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" \ - mostlyclean) \ + installcheck) \ || exit 1 -.PHONY: maybe-mostlyclean-target-libjava mostlyclean-target-libjava -maybe-mostlyclean-target-libjava: +.PHONY: maybe-mostlyclean-sed mostlyclean-sed +maybe-mostlyclean-sed: -mostlyclean-target-libjava: - @[ -f $(TARGET_SUBDIR)/libjava/Makefile ] || exit 0 ; \ +mostlyclean-sed: + @[ -f ./sed/Makefile ] || exit 0; \ r=`${PWD_COMMAND}`; export r; \ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ $(SET_LIB_PATH) \ - echo "Doing mostlyclean in $(TARGET_SUBDIR)/libjava" ; \ - for flag in $(EXTRA_TARGET_FLAGS); do \ + for flag in $(EXTRA_HOST_FLAGS); do \ eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \ done; \ - (cd $(TARGET_SUBDIR)/libjava && \ + echo "Doing mostlyclean in sed" ; \ + (cd sed && \ $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \ "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \ "RANLIB=$${RANLIB}" \ @@ -11954,342 +13813,284 @@ mostlyclean-target-libjava: || exit 1 -.PHONY: maybe-mostlyclean-target-zlib mostlyclean-target-zlib -maybe-mostlyclean-target-zlib: +.PHONY: maybe-clean-sed clean-sed +maybe-clean-sed: -mostlyclean-target-zlib: - @[ -f $(TARGET_SUBDIR)/zlib/Makefile ] || exit 0 ; \ +clean-sed: + @[ -f ./sed/Makefile ] || exit 0; \ r=`${PWD_COMMAND}`; export r; \ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ $(SET_LIB_PATH) \ - echo "Doing mostlyclean in $(TARGET_SUBDIR)/zlib" ; \ - for flag in $(EXTRA_TARGET_FLAGS); do \ + for flag in $(EXTRA_HOST_FLAGS); do \ eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \ done; \ - (cd $(TARGET_SUBDIR)/zlib && \ + echo "Doing clean in sed" ; \ + (cd sed && \ $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \ "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \ "RANLIB=$${RANLIB}" \ "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" \ - mostlyclean) \ + clean) \ || exit 1 -.PHONY: maybe-mostlyclean-target-boehm-gc mostlyclean-target-boehm-gc -maybe-mostlyclean-target-boehm-gc: +.PHONY: maybe-distclean-sed distclean-sed +maybe-distclean-sed: -mostlyclean-target-boehm-gc: - @[ -f $(TARGET_SUBDIR)/boehm-gc/Makefile ] || exit 0 ; \ +distclean-sed: + @[ -f ./sed/Makefile ] || exit 0; \ r=`${PWD_COMMAND}`; export r; \ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ $(SET_LIB_PATH) \ - echo "Doing mostlyclean in $(TARGET_SUBDIR)/boehm-gc" ; \ - for flag in $(EXTRA_TARGET_FLAGS); do \ + for flag in $(EXTRA_HOST_FLAGS); do \ eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \ done; \ - (cd $(TARGET_SUBDIR)/boehm-gc && \ + echo "Doing distclean in sed" ; \ + (cd sed && \ $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \ "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \ "RANLIB=$${RANLIB}" \ "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" \ - mostlyclean) \ + distclean) \ || exit 1 -.PHONY: maybe-mostlyclean-target-qthreads mostlyclean-target-qthreads -maybe-mostlyclean-target-qthreads: +.PHONY: maybe-maintainer-clean-sed maintainer-clean-sed +maybe-maintainer-clean-sed: -mostlyclean-target-qthreads: - @[ -f $(TARGET_SUBDIR)/qthreads/Makefile ] || exit 0 ; \ +maintainer-clean-sed: + @[ -f ./sed/Makefile ] || exit 0; \ r=`${PWD_COMMAND}`; export r; \ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ $(SET_LIB_PATH) \ - echo "Doing mostlyclean in $(TARGET_SUBDIR)/qthreads" ; \ - for flag in $(EXTRA_TARGET_FLAGS); do \ + for flag in $(EXTRA_HOST_FLAGS); do \ eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \ done; \ - (cd $(TARGET_SUBDIR)/qthreads && \ + echo "Doing maintainer-clean in sed" ; \ + (cd sed && \ $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \ "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \ "RANLIB=$${RANLIB}" \ "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" \ - mostlyclean) \ + maintainer-clean) \ || exit 1 -.PHONY: maybe-mostlyclean-target-rda mostlyclean-target-rda -maybe-mostlyclean-target-rda: -mostlyclean-target-rda: - @[ -f $(TARGET_SUBDIR)/rda/Makefile ] || exit 0 ; \ +.PHONY: configure-send-pr maybe-configure-send-pr +maybe-configure-send-pr: +configure-send-pr: + @test ! -f send-pr/Makefile || exit 0; \ + [ -d send-pr ] || mkdir send-pr; \ r=`${PWD_COMMAND}`; export r; \ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ - $(SET_LIB_PATH) \ - echo "Doing mostlyclean in $(TARGET_SUBDIR)/rda" ; \ - for flag in $(EXTRA_TARGET_FLAGS); do \ - eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \ - done; \ - (cd $(TARGET_SUBDIR)/rda && \ - $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \ - "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \ - "RANLIB=$${RANLIB}" \ - "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" \ - mostlyclean) \ + CC="$(CC)"; export CC; \ + CFLAGS="$(CFLAGS)"; export CFLAGS; \ + CONFIG_SHELL="$(SHELL)"; export CONFIG_SHELL; \ + CXX="$(CXX)"; export CXX; \ + CXXFLAGS="$(CXXFLAGS)"; export CXXFLAGS; \ + AR="$(AR)"; export AR; \ + AS="$(AS)"; export AS; \ + CC_FOR_BUILD="$(CC_FOR_BUILD)"; export CC_FOR_BUILD; \ + DLLTOOL="$(DLLTOOL)"; export DLLTOOL; \ + LD="$(LD)"; export LD; \ + NM="$(NM)"; export NM; \ + RANLIB="$(RANLIB)"; export RANLIB; \ + WINDRES="$(WINDRES)"; export WINDRES; \ + OBJCOPY="$(OBJCOPY)"; export OBJCOPY; \ + OBJDUMP="$(OBJDUMP)"; export OBJDUMP; \ + echo Configuring in send-pr; \ + cd send-pr || exit 1; \ + case $(srcdir) in \ + \.) \ + srcdiroption="--srcdir=."; \ + libsrcdir=".";; \ + /* | [A-Za-z]:[\\/]*) \ + srcdiroption="--srcdir=$(srcdir)/send-pr"; \ + libsrcdir="$$s/send-pr";; \ + *) \ + srcdiroption="--srcdir=../$(srcdir)/send-pr"; \ + libsrcdir="$$s/send-pr";; \ + esac; \ + $(SHELL) $${libsrcdir}/configure \ + $(HOST_CONFIGARGS) $${srcdiroption} \ || exit 1 +.PHONY: all-send-pr maybe-all-send-pr +maybe-all-send-pr: +all-send-pr: configure-send-pr + @r=`${PWD_COMMAND}`; export r; \ + s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ + $(SET_LIB_PATH) \ + (cd send-pr && $(MAKE) $(FLAGS_TO_PASS) all) -.PHONY: maybe-mostlyclean-target-libada mostlyclean-target-libada -maybe-mostlyclean-target-libada: +.PHONY: check-send-pr maybe-check-send-pr +maybe-check-send-pr: -mostlyclean-target-libada: - @[ -f $(TARGET_SUBDIR)/libada/Makefile ] || exit 0 ; \ - r=`${PWD_COMMAND}`; export r; \ +check-send-pr: + @r=`${PWD_COMMAND}`; export r; \ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ $(SET_LIB_PATH) \ - echo "Doing mostlyclean in $(TARGET_SUBDIR)/libada" ; \ - for flag in $(EXTRA_TARGET_FLAGS); do \ - eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \ - done; \ - (cd $(TARGET_SUBDIR)/libada && \ - $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \ - "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \ - "RANLIB=$${RANLIB}" \ - "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" \ - mostlyclean) \ - || exit 1 + (cd send-pr && $(MAKE) $(FLAGS_TO_PASS) check) +.PHONY: install-send-pr maybe-install-send-pr +maybe-install-send-pr: -.PHONY: do-clean -do-clean: clean-host clean-target +install-send-pr: installdirs + @r=`${PWD_COMMAND}`; export r; \ + s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ + $(SET_LIB_PATH) \ + (cd send-pr && $(MAKE) $(FLAGS_TO_PASS) install) -.PHONY: clean-host -clean-host: maybe-clean-gcc \ - maybe-clean-ash \ - maybe-clean-autoconf \ - maybe-clean-automake \ - maybe-clean-bash \ - maybe-clean-bfd \ - maybe-clean-opcodes \ - maybe-clean-binutils \ - maybe-clean-bison \ - maybe-clean-byacc \ - maybe-clean-bzip2 \ - maybe-clean-dejagnu \ - maybe-clean-diff \ - maybe-clean-dosutils \ - maybe-clean-etc \ - maybe-clean-fastjar \ - maybe-clean-fileutils \ - maybe-clean-findutils \ - maybe-clean-find \ - maybe-clean-flex \ - maybe-clean-gas \ - maybe-clean-gawk \ - maybe-clean-gettext \ - maybe-clean-gnuserv \ - maybe-clean-gprof \ - maybe-clean-gzip \ - maybe-clean-hello \ - maybe-clean-indent \ - maybe-clean-intl \ - maybe-clean-tcl \ - maybe-clean-itcl \ - maybe-clean-ld \ - maybe-clean-libgui \ - maybe-clean-libiberty \ - maybe-clean-libtool \ - maybe-clean-m4 \ - maybe-clean-make \ - maybe-clean-mmalloc \ - maybe-clean-patch \ - maybe-clean-perl \ - maybe-clean-prms \ - maybe-clean-rcs \ - maybe-clean-readline \ - maybe-clean-release \ - maybe-clean-recode \ - maybe-clean-sed \ - maybe-clean-send-pr \ - maybe-clean-shellutils \ - maybe-clean-sid \ - maybe-clean-sim \ - maybe-clean-tar \ - maybe-clean-texinfo \ - maybe-clean-textutils \ - maybe-clean-time \ - maybe-clean-uudecode \ - maybe-clean-wdiff \ - maybe-clean-zip \ - maybe-clean-zlib \ - maybe-clean-gdb \ - maybe-clean-expect \ - maybe-clean-guile \ - maybe-clean-tk \ - maybe-clean-tix \ - maybe-clean-libtermcap \ - maybe-clean-utils -.PHONY: clean-target -clean-target: \ - maybe-clean-target-libstdc++-v3 \ - maybe-clean-target-newlib \ - maybe-clean-target-libf2c \ - maybe-clean-target-libobjc \ - maybe-clean-target-libtermcap \ - maybe-clean-target-winsup \ - maybe-clean-target-libgloss \ - maybe-clean-target-libiberty \ - maybe-clean-target-gperf \ - maybe-clean-target-examples \ - maybe-clean-target-libffi \ - maybe-clean-target-libjava \ - maybe-clean-target-zlib \ - maybe-clean-target-boehm-gc \ - maybe-clean-target-qthreads \ - maybe-clean-target-rda \ - maybe-clean-target-libada +# Other targets (info, dvi, etc.) -# GCC, the eternal special case -.PHONY: maybe-clean-gcc clean-gcc -maybe-clean-gcc: -clean-gcc: - @[ -f ./gcc/Makefile ] || exit 0; \ +.PHONY: maybe-info-send-pr info-send-pr +maybe-info-send-pr: + +info-send-pr: \ + configure-send-pr + @[ -f ./send-pr/Makefile ] || exit 0; \ r=`${PWD_COMMAND}`; export r; \ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ $(SET_LIB_PATH) \ - for flag in $(EXTRA_GCC_FLAGS); do \ + for flag in $(EXTRA_HOST_FLAGS); do \ eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \ done; \ - echo "Doing clean in gcc" ; \ - (cd gcc && \ + echo "Doing info in send-pr" ; \ + (cd send-pr && \ $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \ "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \ "RANLIB=$${RANLIB}" \ "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" \ - clean) \ + info) \ || exit 1 -# Host modules. -.PHONY: maybe-clean-ash clean-ash -maybe-clean-ash: +.PHONY: maybe-dvi-send-pr dvi-send-pr +maybe-dvi-send-pr: -clean-ash: - @[ -f ./ash/Makefile ] || exit 0; \ +dvi-send-pr: \ + configure-send-pr + @[ -f ./send-pr/Makefile ] || exit 0; \ r=`${PWD_COMMAND}`; export r; \ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ $(SET_LIB_PATH) \ for flag in $(EXTRA_HOST_FLAGS); do \ eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \ done; \ - echo "Doing clean in ash" ; \ - (cd ash && \ + echo "Doing dvi in send-pr" ; \ + (cd send-pr && \ $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \ "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \ "RANLIB=$${RANLIB}" \ "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" \ - clean) \ + dvi) \ || exit 1 -.PHONY: maybe-clean-autoconf clean-autoconf -maybe-clean-autoconf: +.PHONY: maybe-TAGS-send-pr TAGS-send-pr +maybe-TAGS-send-pr: -clean-autoconf: - @[ -f ./autoconf/Makefile ] || exit 0; \ +TAGS-send-pr: \ + configure-send-pr + @[ -f ./send-pr/Makefile ] || exit 0; \ r=`${PWD_COMMAND}`; export r; \ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ $(SET_LIB_PATH) \ for flag in $(EXTRA_HOST_FLAGS); do \ eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \ done; \ - echo "Doing clean in autoconf" ; \ - (cd autoconf && \ + echo "Doing TAGS in send-pr" ; \ + (cd send-pr && \ $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \ "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \ "RANLIB=$${RANLIB}" \ "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" \ - clean) \ + TAGS) \ || exit 1 -.PHONY: maybe-clean-automake clean-automake -maybe-clean-automake: +.PHONY: maybe-install-info-send-pr install-info-send-pr +maybe-install-info-send-pr: -clean-automake: - @[ -f ./automake/Makefile ] || exit 0; \ +install-info-send-pr: \ + configure-send-pr \ + info-send-pr + @[ -f ./send-pr/Makefile ] || exit 0; \ r=`${PWD_COMMAND}`; export r; \ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ $(SET_LIB_PATH) \ for flag in $(EXTRA_HOST_FLAGS); do \ eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \ done; \ - echo "Doing clean in automake" ; \ - (cd automake && \ + echo "Doing install-info in send-pr" ; \ + (cd send-pr && \ $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \ "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \ "RANLIB=$${RANLIB}" \ "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" \ - clean) \ + install-info) \ || exit 1 -.PHONY: maybe-clean-bash clean-bash -maybe-clean-bash: +.PHONY: maybe-installcheck-send-pr installcheck-send-pr +maybe-installcheck-send-pr: -clean-bash: - @[ -f ./bash/Makefile ] || exit 0; \ +installcheck-send-pr: \ + configure-send-pr + @[ -f ./send-pr/Makefile ] || exit 0; \ r=`${PWD_COMMAND}`; export r; \ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ $(SET_LIB_PATH) \ for flag in $(EXTRA_HOST_FLAGS); do \ eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \ done; \ - echo "Doing clean in bash" ; \ - (cd bash && \ + echo "Doing installcheck in send-pr" ; \ + (cd send-pr && \ $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \ "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \ "RANLIB=$${RANLIB}" \ "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" \ - clean) \ + installcheck) \ || exit 1 -.PHONY: maybe-clean-bfd clean-bfd -maybe-clean-bfd: +.PHONY: maybe-mostlyclean-send-pr mostlyclean-send-pr +maybe-mostlyclean-send-pr: -clean-bfd: - @[ -f ./bfd/Makefile ] || exit 0; \ +mostlyclean-send-pr: + @[ -f ./send-pr/Makefile ] || exit 0; \ r=`${PWD_COMMAND}`; export r; \ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ $(SET_LIB_PATH) \ for flag in $(EXTRA_HOST_FLAGS); do \ eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \ done; \ - echo "Doing clean in bfd" ; \ - (cd bfd && \ + echo "Doing mostlyclean in send-pr" ; \ + (cd send-pr && \ $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \ "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \ "RANLIB=$${RANLIB}" \ "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" \ - clean) \ + mostlyclean) \ || exit 1 -.PHONY: maybe-clean-opcodes clean-opcodes -maybe-clean-opcodes: +.PHONY: maybe-clean-send-pr clean-send-pr +maybe-clean-send-pr: -clean-opcodes: - @[ -f ./opcodes/Makefile ] || exit 0; \ +clean-send-pr: + @[ -f ./send-pr/Makefile ] || exit 0; \ r=`${PWD_COMMAND}`; export r; \ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ $(SET_LIB_PATH) \ for flag in $(EXTRA_HOST_FLAGS); do \ eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \ done; \ - echo "Doing clean in opcodes" ; \ - (cd opcodes && \ + echo "Doing clean in send-pr" ; \ + (cd send-pr && \ $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \ "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \ "RANLIB=$${RANLIB}" \ @@ -12298,250 +14099,263 @@ clean-opcodes: || exit 1 -.PHONY: maybe-clean-binutils clean-binutils -maybe-clean-binutils: +.PHONY: maybe-distclean-send-pr distclean-send-pr +maybe-distclean-send-pr: -clean-binutils: - @[ -f ./binutils/Makefile ] || exit 0; \ +distclean-send-pr: + @[ -f ./send-pr/Makefile ] || exit 0; \ r=`${PWD_COMMAND}`; export r; \ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ $(SET_LIB_PATH) \ for flag in $(EXTRA_HOST_FLAGS); do \ eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \ done; \ - echo "Doing clean in binutils" ; \ - (cd binutils && \ + echo "Doing distclean in send-pr" ; \ + (cd send-pr && \ $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \ "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \ "RANLIB=$${RANLIB}" \ "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" \ - clean) \ + distclean) \ || exit 1 -.PHONY: maybe-clean-bison clean-bison -maybe-clean-bison: +.PHONY: maybe-maintainer-clean-send-pr maintainer-clean-send-pr +maybe-maintainer-clean-send-pr: -clean-bison: - @[ -f ./bison/Makefile ] || exit 0; \ +maintainer-clean-send-pr: + @[ -f ./send-pr/Makefile ] || exit 0; \ r=`${PWD_COMMAND}`; export r; \ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ $(SET_LIB_PATH) \ for flag in $(EXTRA_HOST_FLAGS); do \ eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \ done; \ - echo "Doing clean in bison" ; \ - (cd bison && \ + echo "Doing maintainer-clean in send-pr" ; \ + (cd send-pr && \ $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \ "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \ "RANLIB=$${RANLIB}" \ "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" \ - clean) \ + maintainer-clean) \ || exit 1 -.PHONY: maybe-clean-byacc clean-byacc -maybe-clean-byacc: -clean-byacc: - @[ -f ./byacc/Makefile ] || exit 0; \ +.PHONY: configure-shellutils maybe-configure-shellutils +maybe-configure-shellutils: +configure-shellutils: + @test ! -f shellutils/Makefile || exit 0; \ + [ -d shellutils ] || mkdir shellutils; \ r=`${PWD_COMMAND}`; export r; \ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ - $(SET_LIB_PATH) \ - for flag in $(EXTRA_HOST_FLAGS); do \ - eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \ - done; \ - echo "Doing clean in byacc" ; \ - (cd byacc && \ - $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \ - "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \ - "RANLIB=$${RANLIB}" \ - "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" \ - clean) \ + CC="$(CC)"; export CC; \ + CFLAGS="$(CFLAGS)"; export CFLAGS; \ + CONFIG_SHELL="$(SHELL)"; export CONFIG_SHELL; \ + CXX="$(CXX)"; export CXX; \ + CXXFLAGS="$(CXXFLAGS)"; export CXXFLAGS; \ + AR="$(AR)"; export AR; \ + AS="$(AS)"; export AS; \ + CC_FOR_BUILD="$(CC_FOR_BUILD)"; export CC_FOR_BUILD; \ + DLLTOOL="$(DLLTOOL)"; export DLLTOOL; \ + LD="$(LD)"; export LD; \ + NM="$(NM)"; export NM; \ + RANLIB="$(RANLIB)"; export RANLIB; \ + WINDRES="$(WINDRES)"; export WINDRES; \ + OBJCOPY="$(OBJCOPY)"; export OBJCOPY; \ + OBJDUMP="$(OBJDUMP)"; export OBJDUMP; \ + echo Configuring in shellutils; \ + cd shellutils || exit 1; \ + case $(srcdir) in \ + \.) \ + srcdiroption="--srcdir=."; \ + libsrcdir=".";; \ + /* | [A-Za-z]:[\\/]*) \ + srcdiroption="--srcdir=$(srcdir)/shellutils"; \ + libsrcdir="$$s/shellutils";; \ + *) \ + srcdiroption="--srcdir=../$(srcdir)/shellutils"; \ + libsrcdir="$$s/shellutils";; \ + esac; \ + $(SHELL) $${libsrcdir}/configure \ + $(HOST_CONFIGARGS) $${srcdiroption} \ || exit 1 +.PHONY: all-shellutils maybe-all-shellutils +maybe-all-shellutils: +all-shellutils: configure-shellutils + @r=`${PWD_COMMAND}`; export r; \ + s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ + $(SET_LIB_PATH) \ + (cd shellutils && $(MAKE) $(FLAGS_TO_PASS) all) -.PHONY: maybe-clean-bzip2 clean-bzip2 -maybe-clean-bzip2: +.PHONY: check-shellutils maybe-check-shellutils +maybe-check-shellutils: -clean-bzip2: - @[ -f ./bzip2/Makefile ] || exit 0; \ - r=`${PWD_COMMAND}`; export r; \ +check-shellutils: + @r=`${PWD_COMMAND}`; export r; \ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ $(SET_LIB_PATH) \ - for flag in $(EXTRA_HOST_FLAGS); do \ - eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \ - done; \ - echo "Doing clean in bzip2" ; \ - (cd bzip2 && \ - $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \ - "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \ - "RANLIB=$${RANLIB}" \ - "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" \ - clean) \ - || exit 1 + (cd shellutils && $(MAKE) $(FLAGS_TO_PASS) check) -.PHONY: maybe-clean-dejagnu clean-dejagnu -maybe-clean-dejagnu: +.PHONY: install-shellutils maybe-install-shellutils +maybe-install-shellutils: -clean-dejagnu: - @[ -f ./dejagnu/Makefile ] || exit 0; \ - r=`${PWD_COMMAND}`; export r; \ +install-shellutils: installdirs + @r=`${PWD_COMMAND}`; export r; \ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ $(SET_LIB_PATH) \ - for flag in $(EXTRA_HOST_FLAGS); do \ - eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \ - done; \ - echo "Doing clean in dejagnu" ; \ - (cd dejagnu && \ - $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \ - "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \ - "RANLIB=$${RANLIB}" \ - "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" \ - clean) \ - || exit 1 + (cd shellutils && $(MAKE) $(FLAGS_TO_PASS) install) -.PHONY: maybe-clean-diff clean-diff -maybe-clean-diff: +# Other targets (info, dvi, etc.) -clean-diff: - @[ -f ./diff/Makefile ] || exit 0; \ +.PHONY: maybe-info-shellutils info-shellutils +maybe-info-shellutils: + +info-shellutils: \ + configure-shellutils + @[ -f ./shellutils/Makefile ] || exit 0; \ r=`${PWD_COMMAND}`; export r; \ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ $(SET_LIB_PATH) \ for flag in $(EXTRA_HOST_FLAGS); do \ eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \ done; \ - echo "Doing clean in diff" ; \ - (cd diff && \ + echo "Doing info in shellutils" ; \ + (cd shellutils && \ $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \ "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \ "RANLIB=$${RANLIB}" \ "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" \ - clean) \ + info) \ || exit 1 -.PHONY: maybe-clean-dosutils clean-dosutils -maybe-clean-dosutils: +.PHONY: maybe-dvi-shellutils dvi-shellutils +maybe-dvi-shellutils: -clean-dosutils: - @[ -f ./dosutils/Makefile ] || exit 0; \ +dvi-shellutils: \ + configure-shellutils + @[ -f ./shellutils/Makefile ] || exit 0; \ r=`${PWD_COMMAND}`; export r; \ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ $(SET_LIB_PATH) \ for flag in $(EXTRA_HOST_FLAGS); do \ eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \ done; \ - echo "Doing clean in dosutils" ; \ - (cd dosutils && \ + echo "Doing dvi in shellutils" ; \ + (cd shellutils && \ $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \ "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \ "RANLIB=$${RANLIB}" \ "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" \ - clean) \ + dvi) \ || exit 1 -.PHONY: maybe-clean-etc clean-etc -maybe-clean-etc: +.PHONY: maybe-TAGS-shellutils TAGS-shellutils +maybe-TAGS-shellutils: -clean-etc: - @[ -f ./etc/Makefile ] || exit 0; \ +TAGS-shellutils: \ + configure-shellutils + @[ -f ./shellutils/Makefile ] || exit 0; \ r=`${PWD_COMMAND}`; export r; \ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ $(SET_LIB_PATH) \ for flag in $(EXTRA_HOST_FLAGS); do \ eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \ done; \ - echo "Doing clean in etc" ; \ - (cd etc && \ + echo "Doing TAGS in shellutils" ; \ + (cd shellutils && \ $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \ "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \ "RANLIB=$${RANLIB}" \ "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" \ - clean) \ + TAGS) \ || exit 1 -.PHONY: maybe-clean-fastjar clean-fastjar -maybe-clean-fastjar: +.PHONY: maybe-install-info-shellutils install-info-shellutils +maybe-install-info-shellutils: -clean-fastjar: - @[ -f ./fastjar/Makefile ] || exit 0; \ +install-info-shellutils: \ + configure-shellutils \ + info-shellutils + @[ -f ./shellutils/Makefile ] || exit 0; \ r=`${PWD_COMMAND}`; export r; \ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ $(SET_LIB_PATH) \ for flag in $(EXTRA_HOST_FLAGS); do \ eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \ done; \ - echo "Doing clean in fastjar" ; \ - (cd fastjar && \ + echo "Doing install-info in shellutils" ; \ + (cd shellutils && \ $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \ "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \ "RANLIB=$${RANLIB}" \ "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" \ - clean) \ + install-info) \ || exit 1 -.PHONY: maybe-clean-fileutils clean-fileutils -maybe-clean-fileutils: +.PHONY: maybe-installcheck-shellutils installcheck-shellutils +maybe-installcheck-shellutils: -clean-fileutils: - @[ -f ./fileutils/Makefile ] || exit 0; \ +installcheck-shellutils: \ + configure-shellutils + @[ -f ./shellutils/Makefile ] || exit 0; \ r=`${PWD_COMMAND}`; export r; \ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ $(SET_LIB_PATH) \ for flag in $(EXTRA_HOST_FLAGS); do \ eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \ done; \ - echo "Doing clean in fileutils" ; \ - (cd fileutils && \ + echo "Doing installcheck in shellutils" ; \ + (cd shellutils && \ $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \ "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \ "RANLIB=$${RANLIB}" \ "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" \ - clean) \ + installcheck) \ || exit 1 -.PHONY: maybe-clean-findutils clean-findutils -maybe-clean-findutils: +.PHONY: maybe-mostlyclean-shellutils mostlyclean-shellutils +maybe-mostlyclean-shellutils: -clean-findutils: - @[ -f ./findutils/Makefile ] || exit 0; \ +mostlyclean-shellutils: + @[ -f ./shellutils/Makefile ] || exit 0; \ r=`${PWD_COMMAND}`; export r; \ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ $(SET_LIB_PATH) \ for flag in $(EXTRA_HOST_FLAGS); do \ eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \ done; \ - echo "Doing clean in findutils" ; \ - (cd findutils && \ + echo "Doing mostlyclean in shellutils" ; \ + (cd shellutils && \ $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \ "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \ "RANLIB=$${RANLIB}" \ "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" \ - clean) \ + mostlyclean) \ || exit 1 -.PHONY: maybe-clean-find clean-find -maybe-clean-find: +.PHONY: maybe-clean-shellutils clean-shellutils +maybe-clean-shellutils: -clean-find: - @[ -f ./find/Makefile ] || exit 0; \ +clean-shellutils: + @[ -f ./shellutils/Makefile ] || exit 0; \ r=`${PWD_COMMAND}`; export r; \ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ $(SET_LIB_PATH) \ for flag in $(EXTRA_HOST_FLAGS); do \ eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \ done; \ - echo "Doing clean in find" ; \ - (cd find && \ + echo "Doing clean in shellutils" ; \ + (cd shellutils && \ $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \ "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \ "RANLIB=$${RANLIB}" \ @@ -12550,250 +14364,263 @@ clean-find: || exit 1 -.PHONY: maybe-clean-flex clean-flex -maybe-clean-flex: +.PHONY: maybe-distclean-shellutils distclean-shellutils +maybe-distclean-shellutils: -clean-flex: - @[ -f ./flex/Makefile ] || exit 0; \ +distclean-shellutils: + @[ -f ./shellutils/Makefile ] || exit 0; \ r=`${PWD_COMMAND}`; export r; \ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ $(SET_LIB_PATH) \ for flag in $(EXTRA_HOST_FLAGS); do \ eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \ done; \ - echo "Doing clean in flex" ; \ - (cd flex && \ + echo "Doing distclean in shellutils" ; \ + (cd shellutils && \ $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \ "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \ "RANLIB=$${RANLIB}" \ "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" \ - clean) \ + distclean) \ || exit 1 -.PHONY: maybe-clean-gas clean-gas -maybe-clean-gas: +.PHONY: maybe-maintainer-clean-shellutils maintainer-clean-shellutils +maybe-maintainer-clean-shellutils: -clean-gas: - @[ -f ./gas/Makefile ] || exit 0; \ +maintainer-clean-shellutils: + @[ -f ./shellutils/Makefile ] || exit 0; \ r=`${PWD_COMMAND}`; export r; \ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ $(SET_LIB_PATH) \ for flag in $(EXTRA_HOST_FLAGS); do \ eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \ done; \ - echo "Doing clean in gas" ; \ - (cd gas && \ + echo "Doing maintainer-clean in shellutils" ; \ + (cd shellutils && \ $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \ "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \ "RANLIB=$${RANLIB}" \ "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" \ - clean) \ + maintainer-clean) \ || exit 1 -.PHONY: maybe-clean-gawk clean-gawk -maybe-clean-gawk: -clean-gawk: - @[ -f ./gawk/Makefile ] || exit 0; \ +.PHONY: configure-sid maybe-configure-sid +maybe-configure-sid: +configure-sid: + @test ! -f sid/Makefile || exit 0; \ + [ -d sid ] || mkdir sid; \ r=`${PWD_COMMAND}`; export r; \ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ - $(SET_LIB_PATH) \ - for flag in $(EXTRA_HOST_FLAGS); do \ - eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \ - done; \ - echo "Doing clean in gawk" ; \ - (cd gawk && \ - $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \ - "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \ - "RANLIB=$${RANLIB}" \ - "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" \ - clean) \ + CC="$(CC)"; export CC; \ + CFLAGS="$(CFLAGS)"; export CFLAGS; \ + CONFIG_SHELL="$(SHELL)"; export CONFIG_SHELL; \ + CXX="$(CXX)"; export CXX; \ + CXXFLAGS="$(CXXFLAGS)"; export CXXFLAGS; \ + AR="$(AR)"; export AR; \ + AS="$(AS)"; export AS; \ + CC_FOR_BUILD="$(CC_FOR_BUILD)"; export CC_FOR_BUILD; \ + DLLTOOL="$(DLLTOOL)"; export DLLTOOL; \ + LD="$(LD)"; export LD; \ + NM="$(NM)"; export NM; \ + RANLIB="$(RANLIB)"; export RANLIB; \ + WINDRES="$(WINDRES)"; export WINDRES; \ + OBJCOPY="$(OBJCOPY)"; export OBJCOPY; \ + OBJDUMP="$(OBJDUMP)"; export OBJDUMP; \ + echo Configuring in sid; \ + cd sid || exit 1; \ + case $(srcdir) in \ + \.) \ + srcdiroption="--srcdir=."; \ + libsrcdir=".";; \ + /* | [A-Za-z]:[\\/]*) \ + srcdiroption="--srcdir=$(srcdir)/sid"; \ + libsrcdir="$$s/sid";; \ + *) \ + srcdiroption="--srcdir=../$(srcdir)/sid"; \ + libsrcdir="$$s/sid";; \ + esac; \ + $(SHELL) $${libsrcdir}/configure \ + $(HOST_CONFIGARGS) $${srcdiroption} \ || exit 1 +.PHONY: all-sid maybe-all-sid +maybe-all-sid: +all-sid: configure-sid + @r=`${PWD_COMMAND}`; export r; \ + s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ + $(SET_LIB_PATH) \ + (cd sid && $(MAKE) $(FLAGS_TO_PASS) all) -.PHONY: maybe-clean-gettext clean-gettext -maybe-clean-gettext: +.PHONY: check-sid maybe-check-sid +maybe-check-sid: -clean-gettext: - @[ -f ./gettext/Makefile ] || exit 0; \ - r=`${PWD_COMMAND}`; export r; \ +check-sid: + @r=`${PWD_COMMAND}`; export r; \ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ $(SET_LIB_PATH) \ - for flag in $(EXTRA_HOST_FLAGS); do \ - eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \ - done; \ - echo "Doing clean in gettext" ; \ - (cd gettext && \ - $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \ - "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \ - "RANLIB=$${RANLIB}" \ - "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" \ - clean) \ - || exit 1 + (cd sid && $(MAKE) $(FLAGS_TO_PASS) check) -.PHONY: maybe-clean-gnuserv clean-gnuserv -maybe-clean-gnuserv: +.PHONY: install-sid maybe-install-sid +maybe-install-sid: -clean-gnuserv: - @[ -f ./gnuserv/Makefile ] || exit 0; \ - r=`${PWD_COMMAND}`; export r; \ +install-sid: installdirs + @r=`${PWD_COMMAND}`; export r; \ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ $(SET_LIB_PATH) \ - for flag in $(EXTRA_HOST_FLAGS); do \ - eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \ - done; \ - echo "Doing clean in gnuserv" ; \ - (cd gnuserv && \ - $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \ - "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \ - "RANLIB=$${RANLIB}" \ - "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" \ - clean) \ - || exit 1 + (cd sid && $(MAKE) $(FLAGS_TO_PASS) install) -.PHONY: maybe-clean-gprof clean-gprof -maybe-clean-gprof: +# Other targets (info, dvi, etc.) -clean-gprof: - @[ -f ./gprof/Makefile ] || exit 0; \ +.PHONY: maybe-info-sid info-sid +maybe-info-sid: + +info-sid: \ + configure-sid + @[ -f ./sid/Makefile ] || exit 0; \ r=`${PWD_COMMAND}`; export r; \ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ $(SET_LIB_PATH) \ for flag in $(EXTRA_HOST_FLAGS); do \ eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \ done; \ - echo "Doing clean in gprof" ; \ - (cd gprof && \ + echo "Doing info in sid" ; \ + (cd sid && \ $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \ "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \ "RANLIB=$${RANLIB}" \ "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" \ - clean) \ + info) \ || exit 1 -.PHONY: maybe-clean-gzip clean-gzip -maybe-clean-gzip: +.PHONY: maybe-dvi-sid dvi-sid +maybe-dvi-sid: -clean-gzip: - @[ -f ./gzip/Makefile ] || exit 0; \ +dvi-sid: \ + configure-sid + @[ -f ./sid/Makefile ] || exit 0; \ r=`${PWD_COMMAND}`; export r; \ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ $(SET_LIB_PATH) \ for flag in $(EXTRA_HOST_FLAGS); do \ eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \ done; \ - echo "Doing clean in gzip" ; \ - (cd gzip && \ + echo "Doing dvi in sid" ; \ + (cd sid && \ $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \ "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \ "RANLIB=$${RANLIB}" \ "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" \ - clean) \ + dvi) \ || exit 1 -.PHONY: maybe-clean-hello clean-hello -maybe-clean-hello: +.PHONY: maybe-TAGS-sid TAGS-sid +maybe-TAGS-sid: -clean-hello: - @[ -f ./hello/Makefile ] || exit 0; \ +TAGS-sid: \ + configure-sid + @[ -f ./sid/Makefile ] || exit 0; \ r=`${PWD_COMMAND}`; export r; \ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ $(SET_LIB_PATH) \ for flag in $(EXTRA_HOST_FLAGS); do \ eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \ done; \ - echo "Doing clean in hello" ; \ - (cd hello && \ + echo "Doing TAGS in sid" ; \ + (cd sid && \ $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \ "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \ "RANLIB=$${RANLIB}" \ "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" \ - clean) \ + TAGS) \ || exit 1 -.PHONY: maybe-clean-indent clean-indent -maybe-clean-indent: +.PHONY: maybe-install-info-sid install-info-sid +maybe-install-info-sid: -clean-indent: - @[ -f ./indent/Makefile ] || exit 0; \ +install-info-sid: \ + configure-sid \ + info-sid + @[ -f ./sid/Makefile ] || exit 0; \ r=`${PWD_COMMAND}`; export r; \ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ $(SET_LIB_PATH) \ for flag in $(EXTRA_HOST_FLAGS); do \ eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \ done; \ - echo "Doing clean in indent" ; \ - (cd indent && \ + echo "Doing install-info in sid" ; \ + (cd sid && \ $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \ "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \ "RANLIB=$${RANLIB}" \ "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" \ - clean) \ + install-info) \ || exit 1 -.PHONY: maybe-clean-intl clean-intl -maybe-clean-intl: +.PHONY: maybe-installcheck-sid installcheck-sid +maybe-installcheck-sid: -clean-intl: - @[ -f ./intl/Makefile ] || exit 0; \ +installcheck-sid: \ + configure-sid + @[ -f ./sid/Makefile ] || exit 0; \ r=`${PWD_COMMAND}`; export r; \ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ $(SET_LIB_PATH) \ for flag in $(EXTRA_HOST_FLAGS); do \ eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \ done; \ - echo "Doing clean in intl" ; \ - (cd intl && \ + echo "Doing installcheck in sid" ; \ + (cd sid && \ $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \ "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \ "RANLIB=$${RANLIB}" \ "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" \ - clean) \ + installcheck) \ || exit 1 -.PHONY: maybe-clean-tcl clean-tcl -maybe-clean-tcl: +.PHONY: maybe-mostlyclean-sid mostlyclean-sid +maybe-mostlyclean-sid: -clean-tcl: - @[ -f ./tcl/Makefile ] || exit 0; \ +mostlyclean-sid: + @[ -f ./sid/Makefile ] || exit 0; \ r=`${PWD_COMMAND}`; export r; \ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ $(SET_LIB_PATH) \ for flag in $(EXTRA_HOST_FLAGS); do \ eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \ done; \ - echo "Doing clean in tcl" ; \ - (cd tcl && \ + echo "Doing mostlyclean in sid" ; \ + (cd sid && \ $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \ "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \ "RANLIB=$${RANLIB}" \ "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" \ - clean) \ + mostlyclean) \ || exit 1 -.PHONY: maybe-clean-itcl clean-itcl -maybe-clean-itcl: +.PHONY: maybe-clean-sid clean-sid +maybe-clean-sid: -clean-itcl: - @[ -f ./itcl/Makefile ] || exit 0; \ +clean-sid: + @[ -f ./sid/Makefile ] || exit 0; \ r=`${PWD_COMMAND}`; export r; \ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ $(SET_LIB_PATH) \ for flag in $(EXTRA_HOST_FLAGS); do \ eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \ done; \ - echo "Doing clean in itcl" ; \ - (cd itcl && \ + echo "Doing clean in sid" ; \ + (cd sid && \ $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \ "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \ "RANLIB=$${RANLIB}" \ @@ -12802,208 +14629,263 @@ clean-itcl: || exit 1 -.PHONY: maybe-clean-ld clean-ld -maybe-clean-ld: +.PHONY: maybe-distclean-sid distclean-sid +maybe-distclean-sid: -clean-ld: - @[ -f ./ld/Makefile ] || exit 0; \ +distclean-sid: + @[ -f ./sid/Makefile ] || exit 0; \ r=`${PWD_COMMAND}`; export r; \ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ $(SET_LIB_PATH) \ for flag in $(EXTRA_HOST_FLAGS); do \ eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \ done; \ - echo "Doing clean in ld" ; \ - (cd ld && \ + echo "Doing distclean in sid" ; \ + (cd sid && \ $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \ "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \ "RANLIB=$${RANLIB}" \ "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" \ - clean) \ + distclean) \ || exit 1 -.PHONY: maybe-clean-libgui clean-libgui -maybe-clean-libgui: +.PHONY: maybe-maintainer-clean-sid maintainer-clean-sid +maybe-maintainer-clean-sid: -clean-libgui: - @[ -f ./libgui/Makefile ] || exit 0; \ +maintainer-clean-sid: + @[ -f ./sid/Makefile ] || exit 0; \ r=`${PWD_COMMAND}`; export r; \ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ $(SET_LIB_PATH) \ for flag in $(EXTRA_HOST_FLAGS); do \ eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \ done; \ - echo "Doing clean in libgui" ; \ - (cd libgui && \ + echo "Doing maintainer-clean in sid" ; \ + (cd sid && \ $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \ "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \ "RANLIB=$${RANLIB}" \ "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" \ - clean) \ + maintainer-clean) \ || exit 1 -.PHONY: maybe-clean-libiberty clean-libiberty -maybe-clean-libiberty: -clean-libiberty: - @[ -f ./libiberty/Makefile ] || exit 0; \ +.PHONY: configure-sim maybe-configure-sim +maybe-configure-sim: +configure-sim: + @test ! -f sim/Makefile || exit 0; \ + [ -d sim ] || mkdir sim; \ r=`${PWD_COMMAND}`; export r; \ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ - $(SET_LIB_PATH) \ - for flag in $(EXTRA_HOST_FLAGS); do \ - eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \ - done; \ - echo "Doing clean in libiberty" ; \ - (cd libiberty && \ - $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \ - "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \ - "RANLIB=$${RANLIB}" \ - "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" \ - clean) \ + CC="$(CC)"; export CC; \ + CFLAGS="$(CFLAGS)"; export CFLAGS; \ + CONFIG_SHELL="$(SHELL)"; export CONFIG_SHELL; \ + CXX="$(CXX)"; export CXX; \ + CXXFLAGS="$(CXXFLAGS)"; export CXXFLAGS; \ + AR="$(AR)"; export AR; \ + AS="$(AS)"; export AS; \ + CC_FOR_BUILD="$(CC_FOR_BUILD)"; export CC_FOR_BUILD; \ + DLLTOOL="$(DLLTOOL)"; export DLLTOOL; \ + LD="$(LD)"; export LD; \ + NM="$(NM)"; export NM; \ + RANLIB="$(RANLIB)"; export RANLIB; \ + WINDRES="$(WINDRES)"; export WINDRES; \ + OBJCOPY="$(OBJCOPY)"; export OBJCOPY; \ + OBJDUMP="$(OBJDUMP)"; export OBJDUMP; \ + echo Configuring in sim; \ + cd sim || exit 1; \ + case $(srcdir) in \ + \.) \ + srcdiroption="--srcdir=."; \ + libsrcdir=".";; \ + /* | [A-Za-z]:[\\/]*) \ + srcdiroption="--srcdir=$(srcdir)/sim"; \ + libsrcdir="$$s/sim";; \ + *) \ + srcdiroption="--srcdir=../$(srcdir)/sim"; \ + libsrcdir="$$s/sim";; \ + esac; \ + $(SHELL) $${libsrcdir}/configure \ + $(HOST_CONFIGARGS) $${srcdiroption} \ || exit 1 +.PHONY: all-sim maybe-all-sim +maybe-all-sim: +all-sim: configure-sim + @r=`${PWD_COMMAND}`; export r; \ + s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ + $(SET_LIB_PATH) \ + (cd sim && $(MAKE) $(FLAGS_TO_PASS) all) -.PHONY: maybe-clean-libtool clean-libtool -maybe-clean-libtool: +.PHONY: check-sim maybe-check-sim +maybe-check-sim: -clean-libtool: - @[ -f ./libtool/Makefile ] || exit 0; \ +check-sim: + @r=`${PWD_COMMAND}`; export r; \ + s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ + $(SET_LIB_PATH) \ + (cd sim && $(MAKE) $(FLAGS_TO_PASS) check) + + +.PHONY: install-sim maybe-install-sim +maybe-install-sim: + +install-sim: installdirs + @r=`${PWD_COMMAND}`; export r; \ + s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ + $(SET_LIB_PATH) \ + (cd sim && $(MAKE) $(FLAGS_TO_PASS) install) + + +# Other targets (info, dvi, etc.) + +.PHONY: maybe-info-sim info-sim +maybe-info-sim: + +info-sim: \ + configure-sim + @[ -f ./sim/Makefile ] || exit 0; \ r=`${PWD_COMMAND}`; export r; \ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ $(SET_LIB_PATH) \ for flag in $(EXTRA_HOST_FLAGS); do \ eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \ done; \ - echo "Doing clean in libtool" ; \ - (cd libtool && \ + echo "Doing info in sim" ; \ + (cd sim && \ $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \ "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \ "RANLIB=$${RANLIB}" \ "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" \ - clean) \ + info) \ || exit 1 -.PHONY: maybe-clean-m4 clean-m4 -maybe-clean-m4: +.PHONY: maybe-dvi-sim dvi-sim +maybe-dvi-sim: -clean-m4: - @[ -f ./m4/Makefile ] || exit 0; \ +dvi-sim: \ + configure-sim + @[ -f ./sim/Makefile ] || exit 0; \ r=`${PWD_COMMAND}`; export r; \ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ $(SET_LIB_PATH) \ for flag in $(EXTRA_HOST_FLAGS); do \ eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \ done; \ - echo "Doing clean in m4" ; \ - (cd m4 && \ + echo "Doing dvi in sim" ; \ + (cd sim && \ $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \ "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \ "RANLIB=$${RANLIB}" \ "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" \ - clean) \ + dvi) \ || exit 1 -.PHONY: maybe-clean-make clean-make -maybe-clean-make: +.PHONY: maybe-TAGS-sim TAGS-sim +maybe-TAGS-sim: -clean-make: - @[ -f ./make/Makefile ] || exit 0; \ +TAGS-sim: \ + configure-sim + @[ -f ./sim/Makefile ] || exit 0; \ r=`${PWD_COMMAND}`; export r; \ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ $(SET_LIB_PATH) \ for flag in $(EXTRA_HOST_FLAGS); do \ eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \ done; \ - echo "Doing clean in make" ; \ - (cd make && \ + echo "Doing TAGS in sim" ; \ + (cd sim && \ $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \ "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \ "RANLIB=$${RANLIB}" \ "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" \ - clean) \ + TAGS) \ || exit 1 -.PHONY: maybe-clean-mmalloc clean-mmalloc -maybe-clean-mmalloc: +.PHONY: maybe-install-info-sim install-info-sim +maybe-install-info-sim: -clean-mmalloc: - @[ -f ./mmalloc/Makefile ] || exit 0; \ +install-info-sim: \ + configure-sim \ + info-sim + @[ -f ./sim/Makefile ] || exit 0; \ r=`${PWD_COMMAND}`; export r; \ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ $(SET_LIB_PATH) \ for flag in $(EXTRA_HOST_FLAGS); do \ eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \ done; \ - echo "Doing clean in mmalloc" ; \ - (cd mmalloc && \ + echo "Doing install-info in sim" ; \ + (cd sim && \ $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \ "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \ "RANLIB=$${RANLIB}" \ "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" \ - clean) \ + install-info) \ || exit 1 -.PHONY: maybe-clean-patch clean-patch -maybe-clean-patch: +.PHONY: maybe-installcheck-sim installcheck-sim +maybe-installcheck-sim: -clean-patch: - @[ -f ./patch/Makefile ] || exit 0; \ +installcheck-sim: \ + configure-sim + @[ -f ./sim/Makefile ] || exit 0; \ r=`${PWD_COMMAND}`; export r; \ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ $(SET_LIB_PATH) \ for flag in $(EXTRA_HOST_FLAGS); do \ eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \ done; \ - echo "Doing clean in patch" ; \ - (cd patch && \ + echo "Doing installcheck in sim" ; \ + (cd sim && \ $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \ "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \ "RANLIB=$${RANLIB}" \ "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" \ - clean) \ + installcheck) \ || exit 1 -.PHONY: maybe-clean-perl clean-perl -maybe-clean-perl: +.PHONY: maybe-mostlyclean-sim mostlyclean-sim +maybe-mostlyclean-sim: -clean-perl: - @[ -f ./perl/Makefile ] || exit 0; \ +mostlyclean-sim: + @[ -f ./sim/Makefile ] || exit 0; \ r=`${PWD_COMMAND}`; export r; \ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ $(SET_LIB_PATH) \ for flag in $(EXTRA_HOST_FLAGS); do \ eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \ done; \ - echo "Doing clean in perl" ; \ - (cd perl && \ + echo "Doing mostlyclean in sim" ; \ + (cd sim && \ $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \ "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \ "RANLIB=$${RANLIB}" \ "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" \ - clean) \ + mostlyclean) \ || exit 1 -.PHONY: maybe-clean-prms clean-prms -maybe-clean-prms: +.PHONY: maybe-clean-sim clean-sim +maybe-clean-sim: -clean-prms: - @[ -f ./prms/Makefile ] || exit 0; \ +clean-sim: + @[ -f ./sim/Makefile ] || exit 0; \ r=`${PWD_COMMAND}`; export r; \ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ $(SET_LIB_PATH) \ for flag in $(EXTRA_HOST_FLAGS); do \ eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \ done; \ - echo "Doing clean in prms" ; \ - (cd prms && \ + echo "Doing clean in sim" ; \ + (cd sim && \ $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \ "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \ "RANLIB=$${RANLIB}" \ @@ -13012,192 +14894,247 @@ clean-prms: || exit 1 -.PHONY: maybe-clean-rcs clean-rcs -maybe-clean-rcs: +.PHONY: maybe-distclean-sim distclean-sim +maybe-distclean-sim: -clean-rcs: - @[ -f ./rcs/Makefile ] || exit 0; \ +distclean-sim: + @[ -f ./sim/Makefile ] || exit 0; \ r=`${PWD_COMMAND}`; export r; \ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ $(SET_LIB_PATH) \ for flag in $(EXTRA_HOST_FLAGS); do \ eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \ done; \ - echo "Doing clean in rcs" ; \ - (cd rcs && \ + echo "Doing distclean in sim" ; \ + (cd sim && \ $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \ "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \ "RANLIB=$${RANLIB}" \ "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" \ - clean) \ + distclean) \ || exit 1 -.PHONY: maybe-clean-readline clean-readline -maybe-clean-readline: +.PHONY: maybe-maintainer-clean-sim maintainer-clean-sim +maybe-maintainer-clean-sim: -clean-readline: - @[ -f ./readline/Makefile ] || exit 0; \ +maintainer-clean-sim: + @[ -f ./sim/Makefile ] || exit 0; \ r=`${PWD_COMMAND}`; export r; \ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ $(SET_LIB_PATH) \ for flag in $(EXTRA_HOST_FLAGS); do \ eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \ done; \ - echo "Doing clean in readline" ; \ - (cd readline && \ + echo "Doing maintainer-clean in sim" ; \ + (cd sim && \ $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \ "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \ "RANLIB=$${RANLIB}" \ "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" \ - clean) \ + maintainer-clean) \ || exit 1 -.PHONY: maybe-clean-release clean-release -maybe-clean-release: -clean-release: - @[ -f ./release/Makefile ] || exit 0; \ +.PHONY: configure-tar maybe-configure-tar +maybe-configure-tar: +configure-tar: + @test ! -f tar/Makefile || exit 0; \ + [ -d tar ] || mkdir tar; \ r=`${PWD_COMMAND}`; export r; \ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ - $(SET_LIB_PATH) \ - for flag in $(EXTRA_HOST_FLAGS); do \ - eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \ - done; \ - echo "Doing clean in release" ; \ - (cd release && \ - $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \ - "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \ - "RANLIB=$${RANLIB}" \ - "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" \ - clean) \ + CC="$(CC)"; export CC; \ + CFLAGS="$(CFLAGS)"; export CFLAGS; \ + CONFIG_SHELL="$(SHELL)"; export CONFIG_SHELL; \ + CXX="$(CXX)"; export CXX; \ + CXXFLAGS="$(CXXFLAGS)"; export CXXFLAGS; \ + AR="$(AR)"; export AR; \ + AS="$(AS)"; export AS; \ + CC_FOR_BUILD="$(CC_FOR_BUILD)"; export CC_FOR_BUILD; \ + DLLTOOL="$(DLLTOOL)"; export DLLTOOL; \ + LD="$(LD)"; export LD; \ + NM="$(NM)"; export NM; \ + RANLIB="$(RANLIB)"; export RANLIB; \ + WINDRES="$(WINDRES)"; export WINDRES; \ + OBJCOPY="$(OBJCOPY)"; export OBJCOPY; \ + OBJDUMP="$(OBJDUMP)"; export OBJDUMP; \ + echo Configuring in tar; \ + cd tar || exit 1; \ + case $(srcdir) in \ + \.) \ + srcdiroption="--srcdir=."; \ + libsrcdir=".";; \ + /* | [A-Za-z]:[\\/]*) \ + srcdiroption="--srcdir=$(srcdir)/tar"; \ + libsrcdir="$$s/tar";; \ + *) \ + srcdiroption="--srcdir=../$(srcdir)/tar"; \ + libsrcdir="$$s/tar";; \ + esac; \ + $(SHELL) $${libsrcdir}/configure \ + $(HOST_CONFIGARGS) $${srcdiroption} \ || exit 1 +.PHONY: all-tar maybe-all-tar +maybe-all-tar: +all-tar: configure-tar + @r=`${PWD_COMMAND}`; export r; \ + s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ + $(SET_LIB_PATH) \ + (cd tar && $(MAKE) $(FLAGS_TO_PASS) all) -.PHONY: maybe-clean-recode clean-recode -maybe-clean-recode: +.PHONY: check-tar maybe-check-tar +maybe-check-tar: -clean-recode: - @[ -f ./recode/Makefile ] || exit 0; \ +check-tar: + @r=`${PWD_COMMAND}`; export r; \ + s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ + $(SET_LIB_PATH) \ + (cd tar && $(MAKE) $(FLAGS_TO_PASS) check) + + +.PHONY: install-tar maybe-install-tar +maybe-install-tar: + +install-tar: installdirs + @r=`${PWD_COMMAND}`; export r; \ + s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ + $(SET_LIB_PATH) \ + (cd tar && $(MAKE) $(FLAGS_TO_PASS) install) + + +# Other targets (info, dvi, etc.) + +.PHONY: maybe-info-tar info-tar +maybe-info-tar: + +info-tar: \ + configure-tar + @[ -f ./tar/Makefile ] || exit 0; \ r=`${PWD_COMMAND}`; export r; \ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ $(SET_LIB_PATH) \ for flag in $(EXTRA_HOST_FLAGS); do \ eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \ done; \ - echo "Doing clean in recode" ; \ - (cd recode && \ + echo "Doing info in tar" ; \ + (cd tar && \ $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \ "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \ "RANLIB=$${RANLIB}" \ "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" \ - clean) \ + info) \ || exit 1 -.PHONY: maybe-clean-sed clean-sed -maybe-clean-sed: +.PHONY: maybe-dvi-tar dvi-tar +maybe-dvi-tar: -clean-sed: - @[ -f ./sed/Makefile ] || exit 0; \ +dvi-tar: \ + configure-tar + @[ -f ./tar/Makefile ] || exit 0; \ r=`${PWD_COMMAND}`; export r; \ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ $(SET_LIB_PATH) \ for flag in $(EXTRA_HOST_FLAGS); do \ eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \ done; \ - echo "Doing clean in sed" ; \ - (cd sed && \ + echo "Doing dvi in tar" ; \ + (cd tar && \ $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \ "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \ "RANLIB=$${RANLIB}" \ "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" \ - clean) \ + dvi) \ || exit 1 -.PHONY: maybe-clean-send-pr clean-send-pr -maybe-clean-send-pr: +.PHONY: maybe-TAGS-tar TAGS-tar +maybe-TAGS-tar: -clean-send-pr: - @[ -f ./send-pr/Makefile ] || exit 0; \ +TAGS-tar: \ + configure-tar + @[ -f ./tar/Makefile ] || exit 0; \ r=`${PWD_COMMAND}`; export r; \ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ $(SET_LIB_PATH) \ for flag in $(EXTRA_HOST_FLAGS); do \ eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \ done; \ - echo "Doing clean in send-pr" ; \ - (cd send-pr && \ + echo "Doing TAGS in tar" ; \ + (cd tar && \ $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \ "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \ "RANLIB=$${RANLIB}" \ "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" \ - clean) \ + TAGS) \ || exit 1 -.PHONY: maybe-clean-shellutils clean-shellutils -maybe-clean-shellutils: +.PHONY: maybe-install-info-tar install-info-tar +maybe-install-info-tar: -clean-shellutils: - @[ -f ./shellutils/Makefile ] || exit 0; \ +install-info-tar: \ + configure-tar \ + info-tar + @[ -f ./tar/Makefile ] || exit 0; \ r=`${PWD_COMMAND}`; export r; \ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ $(SET_LIB_PATH) \ for flag in $(EXTRA_HOST_FLAGS); do \ eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \ done; \ - echo "Doing clean in shellutils" ; \ - (cd shellutils && \ + echo "Doing install-info in tar" ; \ + (cd tar && \ $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \ "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \ "RANLIB=$${RANLIB}" \ "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" \ - clean) \ + install-info) \ || exit 1 -.PHONY: maybe-clean-sid clean-sid -maybe-clean-sid: +.PHONY: maybe-installcheck-tar installcheck-tar +maybe-installcheck-tar: -clean-sid: - @[ -f ./sid/Makefile ] || exit 0; \ +installcheck-tar: \ + configure-tar + @[ -f ./tar/Makefile ] || exit 0; \ r=`${PWD_COMMAND}`; export r; \ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ $(SET_LIB_PATH) \ for flag in $(EXTRA_HOST_FLAGS); do \ eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \ done; \ - echo "Doing clean in sid" ; \ - (cd sid && \ + echo "Doing installcheck in tar" ; \ + (cd tar && \ $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \ "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \ "RANLIB=$${RANLIB}" \ "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" \ - clean) \ + installcheck) \ || exit 1 -.PHONY: maybe-clean-sim clean-sim -maybe-clean-sim: +.PHONY: maybe-mostlyclean-tar mostlyclean-tar +maybe-mostlyclean-tar: -clean-sim: - @[ -f ./sim/Makefile ] || exit 0; \ +mostlyclean-tar: + @[ -f ./tar/Makefile ] || exit 0; \ r=`${PWD_COMMAND}`; export r; \ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ $(SET_LIB_PATH) \ for flag in $(EXTRA_HOST_FLAGS); do \ eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \ done; \ - echo "Doing clean in sim" ; \ - (cd sim && \ + echo "Doing mostlyclean in tar" ; \ + (cd tar && \ $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \ "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \ "RANLIB=$${RANLIB}" \ "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" \ - clean) \ + mostlyclean) \ || exit 1 @@ -13222,208 +15159,259 @@ clean-tar: || exit 1 -.PHONY: maybe-clean-texinfo clean-texinfo -maybe-clean-texinfo: +.PHONY: maybe-distclean-tar distclean-tar +maybe-distclean-tar: -clean-texinfo: - @[ -f ./texinfo/Makefile ] || exit 0; \ +distclean-tar: + @[ -f ./tar/Makefile ] || exit 0; \ r=`${PWD_COMMAND}`; export r; \ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ $(SET_LIB_PATH) \ for flag in $(EXTRA_HOST_FLAGS); do \ eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \ done; \ - echo "Doing clean in texinfo" ; \ - (cd texinfo && \ + echo "Doing distclean in tar" ; \ + (cd tar && \ $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \ "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \ "RANLIB=$${RANLIB}" \ "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" \ - clean) \ + distclean) \ || exit 1 -.PHONY: maybe-clean-textutils clean-textutils -maybe-clean-textutils: +.PHONY: maybe-maintainer-clean-tar maintainer-clean-tar +maybe-maintainer-clean-tar: -clean-textutils: - @[ -f ./textutils/Makefile ] || exit 0; \ +maintainer-clean-tar: + @[ -f ./tar/Makefile ] || exit 0; \ r=`${PWD_COMMAND}`; export r; \ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ $(SET_LIB_PATH) \ for flag in $(EXTRA_HOST_FLAGS); do \ eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \ done; \ - echo "Doing clean in textutils" ; \ - (cd textutils && \ + echo "Doing maintainer-clean in tar" ; \ + (cd tar && \ $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \ "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \ "RANLIB=$${RANLIB}" \ "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" \ - clean) \ + maintainer-clean) \ || exit 1 -.PHONY: maybe-clean-time clean-time -maybe-clean-time: -clean-time: - @[ -f ./time/Makefile ] || exit 0; \ +.PHONY: configure-texinfo maybe-configure-texinfo +maybe-configure-texinfo: +configure-texinfo: + @test ! -f texinfo/Makefile || exit 0; \ + [ -d texinfo ] || mkdir texinfo; \ r=`${PWD_COMMAND}`; export r; \ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ - $(SET_LIB_PATH) \ - for flag in $(EXTRA_HOST_FLAGS); do \ - eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \ - done; \ - echo "Doing clean in time" ; \ - (cd time && \ - $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \ - "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \ - "RANLIB=$${RANLIB}" \ - "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" \ - clean) \ + CC="$(CC)"; export CC; \ + CFLAGS="$(CFLAGS)"; export CFLAGS; \ + CONFIG_SHELL="$(SHELL)"; export CONFIG_SHELL; \ + CXX="$(CXX)"; export CXX; \ + CXXFLAGS="$(CXXFLAGS)"; export CXXFLAGS; \ + AR="$(AR)"; export AR; \ + AS="$(AS)"; export AS; \ + CC_FOR_BUILD="$(CC_FOR_BUILD)"; export CC_FOR_BUILD; \ + DLLTOOL="$(DLLTOOL)"; export DLLTOOL; \ + LD="$(LD)"; export LD; \ + NM="$(NM)"; export NM; \ + RANLIB="$(RANLIB)"; export RANLIB; \ + WINDRES="$(WINDRES)"; export WINDRES; \ + OBJCOPY="$(OBJCOPY)"; export OBJCOPY; \ + OBJDUMP="$(OBJDUMP)"; export OBJDUMP; \ + echo Configuring in texinfo; \ + cd texinfo || exit 1; \ + case $(srcdir) in \ + \.) \ + srcdiroption="--srcdir=."; \ + libsrcdir=".";; \ + /* | [A-Za-z]:[\\/]*) \ + srcdiroption="--srcdir=$(srcdir)/texinfo"; \ + libsrcdir="$$s/texinfo";; \ + *) \ + srcdiroption="--srcdir=../$(srcdir)/texinfo"; \ + libsrcdir="$$s/texinfo";; \ + esac; \ + $(SHELL) $${libsrcdir}/configure \ + $(HOST_CONFIGARGS) $${srcdiroption} \ || exit 1 +.PHONY: all-texinfo maybe-all-texinfo +maybe-all-texinfo: +all-texinfo: configure-texinfo + @r=`${PWD_COMMAND}`; export r; \ + s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ + $(SET_LIB_PATH) \ + (cd texinfo && $(MAKE) $(FLAGS_TO_PASS) all) + +.PHONY: check-texinfo maybe-check-texinfo +maybe-check-texinfo: -.PHONY: maybe-clean-uudecode clean-uudecode -maybe-clean-uudecode: +check-texinfo: + @r=`${PWD_COMMAND}`; export r; \ + s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ + $(SET_LIB_PATH) \ + (cd texinfo && $(MAKE) $(FLAGS_TO_PASS) check) -clean-uudecode: - @[ -f ./uudecode/Makefile ] || exit 0; \ + +.PHONY: install-texinfo maybe-install-texinfo +maybe-install-texinfo: + +install-texinfo: + + +# Other targets (info, dvi, etc.) + +.PHONY: maybe-info-texinfo info-texinfo +maybe-info-texinfo: + +info-texinfo: \ + configure-texinfo + @[ -f ./texinfo/Makefile ] || exit 0; \ r=`${PWD_COMMAND}`; export r; \ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ $(SET_LIB_PATH) \ for flag in $(EXTRA_HOST_FLAGS); do \ eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \ done; \ - echo "Doing clean in uudecode" ; \ - (cd uudecode && \ + echo "Doing info in texinfo" ; \ + (cd texinfo && \ $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \ "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \ "RANLIB=$${RANLIB}" \ "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" \ - clean) \ + info) \ || exit 1 -.PHONY: maybe-clean-wdiff clean-wdiff -maybe-clean-wdiff: +.PHONY: maybe-dvi-texinfo dvi-texinfo +maybe-dvi-texinfo: -clean-wdiff: - @[ -f ./wdiff/Makefile ] || exit 0; \ +dvi-texinfo: \ + configure-texinfo + @[ -f ./texinfo/Makefile ] || exit 0; \ r=`${PWD_COMMAND}`; export r; \ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ $(SET_LIB_PATH) \ for flag in $(EXTRA_HOST_FLAGS); do \ eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \ done; \ - echo "Doing clean in wdiff" ; \ - (cd wdiff && \ + echo "Doing dvi in texinfo" ; \ + (cd texinfo && \ $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \ "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \ "RANLIB=$${RANLIB}" \ "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" \ - clean) \ + dvi) \ || exit 1 -.PHONY: maybe-clean-zip clean-zip -maybe-clean-zip: +.PHONY: maybe-TAGS-texinfo TAGS-texinfo +maybe-TAGS-texinfo: -clean-zip: - @[ -f ./zip/Makefile ] || exit 0; \ +TAGS-texinfo: \ + configure-texinfo + @[ -f ./texinfo/Makefile ] || exit 0; \ r=`${PWD_COMMAND}`; export r; \ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ $(SET_LIB_PATH) \ for flag in $(EXTRA_HOST_FLAGS); do \ eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \ done; \ - echo "Doing clean in zip" ; \ - (cd zip && \ + echo "Doing TAGS in texinfo" ; \ + (cd texinfo && \ $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \ "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \ "RANLIB=$${RANLIB}" \ "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" \ - clean) \ + TAGS) \ || exit 1 -.PHONY: maybe-clean-zlib clean-zlib -maybe-clean-zlib: +.PHONY: maybe-install-info-texinfo install-info-texinfo +maybe-install-info-texinfo: -clean-zlib: - @[ -f ./zlib/Makefile ] || exit 0; \ +install-info-texinfo: \ + configure-texinfo \ + info-texinfo + @[ -f ./texinfo/Makefile ] || exit 0; \ r=`${PWD_COMMAND}`; export r; \ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ $(SET_LIB_PATH) \ for flag in $(EXTRA_HOST_FLAGS); do \ eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \ done; \ - echo "Doing clean in zlib" ; \ - (cd zlib && \ + echo "Doing install-info in texinfo" ; \ + (cd texinfo && \ $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \ "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \ "RANLIB=$${RANLIB}" \ "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" \ - clean) \ + install-info) \ || exit 1 -.PHONY: maybe-clean-gdb clean-gdb -maybe-clean-gdb: +.PHONY: maybe-installcheck-texinfo installcheck-texinfo +maybe-installcheck-texinfo: -clean-gdb: - @[ -f ./gdb/Makefile ] || exit 0; \ +installcheck-texinfo: \ + configure-texinfo + @[ -f ./texinfo/Makefile ] || exit 0; \ r=`${PWD_COMMAND}`; export r; \ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ $(SET_LIB_PATH) \ for flag in $(EXTRA_HOST_FLAGS); do \ eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \ done; \ - echo "Doing clean in gdb" ; \ - (cd gdb && \ + echo "Doing installcheck in texinfo" ; \ + (cd texinfo && \ $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \ "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \ "RANLIB=$${RANLIB}" \ "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" \ - clean) \ + installcheck) \ || exit 1 -.PHONY: maybe-clean-expect clean-expect -maybe-clean-expect: +.PHONY: maybe-mostlyclean-texinfo mostlyclean-texinfo +maybe-mostlyclean-texinfo: -clean-expect: - @[ -f ./expect/Makefile ] || exit 0; \ +mostlyclean-texinfo: + @[ -f ./texinfo/Makefile ] || exit 0; \ r=`${PWD_COMMAND}`; export r; \ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ $(SET_LIB_PATH) \ for flag in $(EXTRA_HOST_FLAGS); do \ eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \ done; \ - echo "Doing clean in expect" ; \ - (cd expect && \ + echo "Doing mostlyclean in texinfo" ; \ + (cd texinfo && \ $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \ "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \ "RANLIB=$${RANLIB}" \ "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" \ - clean) \ + mostlyclean) \ || exit 1 -.PHONY: maybe-clean-guile clean-guile -maybe-clean-guile: +.PHONY: maybe-clean-texinfo clean-texinfo +maybe-clean-texinfo: -clean-guile: - @[ -f ./guile/Makefile ] || exit 0; \ +clean-texinfo: + @[ -f ./texinfo/Makefile ] || exit 0; \ r=`${PWD_COMMAND}`; export r; \ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ $(SET_LIB_PATH) \ for flag in $(EXTRA_HOST_FLAGS); do \ eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \ done; \ - echo "Doing clean in guile" ; \ - (cd guile && \ + echo "Doing clean in texinfo" ; \ + (cd texinfo && \ $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \ "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \ "RANLIB=$${RANLIB}" \ @@ -13432,225 +15420,263 @@ clean-guile: || exit 1 -.PHONY: maybe-clean-tk clean-tk -maybe-clean-tk: +.PHONY: maybe-distclean-texinfo distclean-texinfo +maybe-distclean-texinfo: -clean-tk: - @[ -f ./tk/Makefile ] || exit 0; \ +distclean-texinfo: + @[ -f ./texinfo/Makefile ] || exit 0; \ r=`${PWD_COMMAND}`; export r; \ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ $(SET_LIB_PATH) \ for flag in $(EXTRA_HOST_FLAGS); do \ eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \ done; \ - echo "Doing clean in tk" ; \ - (cd tk && \ + echo "Doing distclean in texinfo" ; \ + (cd texinfo && \ $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \ "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \ "RANLIB=$${RANLIB}" \ "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" \ - clean) \ + distclean) \ || exit 1 -.PHONY: maybe-clean-tix clean-tix -maybe-clean-tix: +.PHONY: maybe-maintainer-clean-texinfo maintainer-clean-texinfo +maybe-maintainer-clean-texinfo: -clean-tix: - @[ -f ./tix/Makefile ] || exit 0; \ +maintainer-clean-texinfo: + @[ -f ./texinfo/Makefile ] || exit 0; \ r=`${PWD_COMMAND}`; export r; \ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ $(SET_LIB_PATH) \ for flag in $(EXTRA_HOST_FLAGS); do \ eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \ done; \ - echo "Doing clean in tix" ; \ - (cd tix && \ + echo "Doing maintainer-clean in texinfo" ; \ + (cd texinfo && \ $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \ "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \ "RANLIB=$${RANLIB}" \ "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" \ - clean) \ + maintainer-clean) \ || exit 1 -.PHONY: maybe-clean-libtermcap clean-libtermcap -maybe-clean-libtermcap: -# libtermcap doesn't support clean. -clean-libtermcap: +.PHONY: configure-textutils maybe-configure-textutils +maybe-configure-textutils: +configure-textutils: + @test ! -f textutils/Makefile || exit 0; \ + [ -d textutils ] || mkdir textutils; \ + r=`${PWD_COMMAND}`; export r; \ + s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ + CC="$(CC)"; export CC; \ + CFLAGS="$(CFLAGS)"; export CFLAGS; \ + CONFIG_SHELL="$(SHELL)"; export CONFIG_SHELL; \ + CXX="$(CXX)"; export CXX; \ + CXXFLAGS="$(CXXFLAGS)"; export CXXFLAGS; \ + AR="$(AR)"; export AR; \ + AS="$(AS)"; export AS; \ + CC_FOR_BUILD="$(CC_FOR_BUILD)"; export CC_FOR_BUILD; \ + DLLTOOL="$(DLLTOOL)"; export DLLTOOL; \ + LD="$(LD)"; export LD; \ + NM="$(NM)"; export NM; \ + RANLIB="$(RANLIB)"; export RANLIB; \ + WINDRES="$(WINDRES)"; export WINDRES; \ + OBJCOPY="$(OBJCOPY)"; export OBJCOPY; \ + OBJDUMP="$(OBJDUMP)"; export OBJDUMP; \ + echo Configuring in textutils; \ + cd textutils || exit 1; \ + case $(srcdir) in \ + \.) \ + srcdiroption="--srcdir=."; \ + libsrcdir=".";; \ + /* | [A-Za-z]:[\\/]*) \ + srcdiroption="--srcdir=$(srcdir)/textutils"; \ + libsrcdir="$$s/textutils";; \ + *) \ + srcdiroption="--srcdir=../$(srcdir)/textutils"; \ + libsrcdir="$$s/textutils";; \ + esac; \ + $(SHELL) $${libsrcdir}/configure \ + $(HOST_CONFIGARGS) $${srcdiroption} \ + || exit 1 +.PHONY: all-textutils maybe-all-textutils +maybe-all-textutils: +all-textutils: configure-textutils + @r=`${PWD_COMMAND}`; export r; \ + s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ + $(SET_LIB_PATH) \ + (cd textutils && $(MAKE) $(FLAGS_TO_PASS) all) -.PHONY: maybe-clean-utils clean-utils -maybe-clean-utils: +.PHONY: check-textutils maybe-check-textutils +maybe-check-textutils: -clean-utils: - @[ -f ./utils/Makefile ] || exit 0; \ - r=`${PWD_COMMAND}`; export r; \ +check-textutils: + @r=`${PWD_COMMAND}`; export r; \ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ $(SET_LIB_PATH) \ - for flag in $(EXTRA_HOST_FLAGS); do \ - eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \ - done; \ - echo "Doing clean in utils" ; \ - (cd utils && \ - $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \ - "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \ - "RANLIB=$${RANLIB}" \ - "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" \ - clean) \ - || exit 1 + (cd textutils && $(MAKE) $(FLAGS_TO_PASS) check) +.PHONY: install-textutils maybe-install-textutils +maybe-install-textutils: -# Target modules. +install-textutils: installdirs + @r=`${PWD_COMMAND}`; export r; \ + s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ + $(SET_LIB_PATH) \ + (cd textutils && $(MAKE) $(FLAGS_TO_PASS) install) -.PHONY: maybe-clean-target-libstdc++-v3 clean-target-libstdc++-v3 -maybe-clean-target-libstdc++-v3: -clean-target-libstdc++-v3: - @[ -f $(TARGET_SUBDIR)/libstdc++-v3/Makefile ] || exit 0 ; \ +# Other targets (info, dvi, etc.) + +.PHONY: maybe-info-textutils info-textutils +maybe-info-textutils: + +info-textutils: \ + configure-textutils + @[ -f ./textutils/Makefile ] || exit 0; \ r=`${PWD_COMMAND}`; export r; \ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ $(SET_LIB_PATH) \ - echo "Doing clean in $(TARGET_SUBDIR)/libstdc++-v3" ; \ - for flag in $(EXTRA_TARGET_FLAGS); do \ + for flag in $(EXTRA_HOST_FLAGS); do \ eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \ done; \ - (cd $(TARGET_SUBDIR)/libstdc++-v3 && \ + echo "Doing info in textutils" ; \ + (cd textutils && \ $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \ "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \ "RANLIB=$${RANLIB}" \ "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" \ - clean) \ + info) \ || exit 1 -.PHONY: maybe-clean-target-newlib clean-target-newlib -maybe-clean-target-newlib: +.PHONY: maybe-dvi-textutils dvi-textutils +maybe-dvi-textutils: -clean-target-newlib: - @[ -f $(TARGET_SUBDIR)/newlib/Makefile ] || exit 0 ; \ +dvi-textutils: \ + configure-textutils + @[ -f ./textutils/Makefile ] || exit 0; \ r=`${PWD_COMMAND}`; export r; \ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ $(SET_LIB_PATH) \ - echo "Doing clean in $(TARGET_SUBDIR)/newlib" ; \ - for flag in $(EXTRA_TARGET_FLAGS); do \ + for flag in $(EXTRA_HOST_FLAGS); do \ eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \ done; \ - (cd $(TARGET_SUBDIR)/newlib && \ + echo "Doing dvi in textutils" ; \ + (cd textutils && \ $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \ "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \ "RANLIB=$${RANLIB}" \ "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" \ - clean) \ + dvi) \ || exit 1 -.PHONY: maybe-clean-target-libf2c clean-target-libf2c -maybe-clean-target-libf2c: +.PHONY: maybe-TAGS-textutils TAGS-textutils +maybe-TAGS-textutils: -clean-target-libf2c: - @[ -f $(TARGET_SUBDIR)/libf2c/Makefile ] || exit 0 ; \ +TAGS-textutils: \ + configure-textutils + @[ -f ./textutils/Makefile ] || exit 0; \ r=`${PWD_COMMAND}`; export r; \ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ $(SET_LIB_PATH) \ - echo "Doing clean in $(TARGET_SUBDIR)/libf2c" ; \ - for flag in $(EXTRA_TARGET_FLAGS); do \ + for flag in $(EXTRA_HOST_FLAGS); do \ eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \ done; \ - (cd $(TARGET_SUBDIR)/libf2c && \ + echo "Doing TAGS in textutils" ; \ + (cd textutils && \ $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \ "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \ "RANLIB=$${RANLIB}" \ "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" \ - clean) \ + TAGS) \ || exit 1 -.PHONY: maybe-clean-target-libobjc clean-target-libobjc -maybe-clean-target-libobjc: +.PHONY: maybe-install-info-textutils install-info-textutils +maybe-install-info-textutils: -clean-target-libobjc: - @[ -f $(TARGET_SUBDIR)/libobjc/Makefile ] || exit 0 ; \ +install-info-textutils: \ + configure-textutils \ + info-textutils + @[ -f ./textutils/Makefile ] || exit 0; \ r=`${PWD_COMMAND}`; export r; \ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ $(SET_LIB_PATH) \ - echo "Doing clean in $(TARGET_SUBDIR)/libobjc" ; \ - for flag in $(EXTRA_TARGET_FLAGS); do \ + for flag in $(EXTRA_HOST_FLAGS); do \ eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \ done; \ - (cd $(TARGET_SUBDIR)/libobjc && \ + echo "Doing install-info in textutils" ; \ + (cd textutils && \ $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \ "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \ "RANLIB=$${RANLIB}" \ "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" \ - clean) \ + install-info) \ || exit 1 -.PHONY: maybe-clean-target-libtermcap clean-target-libtermcap -maybe-clean-target-libtermcap: - -# libtermcap doesn't support clean. -clean-target-libtermcap: - - -.PHONY: maybe-clean-target-winsup clean-target-winsup -maybe-clean-target-winsup: +.PHONY: maybe-installcheck-textutils installcheck-textutils +maybe-installcheck-textutils: -clean-target-winsup: - @[ -f $(TARGET_SUBDIR)/winsup/Makefile ] || exit 0 ; \ +installcheck-textutils: \ + configure-textutils + @[ -f ./textutils/Makefile ] || exit 0; \ r=`${PWD_COMMAND}`; export r; \ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ $(SET_LIB_PATH) \ - echo "Doing clean in $(TARGET_SUBDIR)/winsup" ; \ - for flag in $(EXTRA_TARGET_FLAGS); do \ + for flag in $(EXTRA_HOST_FLAGS); do \ eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \ done; \ - (cd $(TARGET_SUBDIR)/winsup && \ + echo "Doing installcheck in textutils" ; \ + (cd textutils && \ $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \ "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \ "RANLIB=$${RANLIB}" \ "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" \ - clean) \ + installcheck) \ || exit 1 -.PHONY: maybe-clean-target-libgloss clean-target-libgloss -maybe-clean-target-libgloss: +.PHONY: maybe-mostlyclean-textutils mostlyclean-textutils +maybe-mostlyclean-textutils: -clean-target-libgloss: - @[ -f $(TARGET_SUBDIR)/libgloss/Makefile ] || exit 0 ; \ +mostlyclean-textutils: + @[ -f ./textutils/Makefile ] || exit 0; \ r=`${PWD_COMMAND}`; export r; \ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ $(SET_LIB_PATH) \ - echo "Doing clean in $(TARGET_SUBDIR)/libgloss" ; \ - for flag in $(EXTRA_TARGET_FLAGS); do \ + for flag in $(EXTRA_HOST_FLAGS); do \ eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \ done; \ - (cd $(TARGET_SUBDIR)/libgloss && \ + echo "Doing mostlyclean in textutils" ; \ + (cd textutils && \ $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \ "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \ "RANLIB=$${RANLIB}" \ "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" \ - clean) \ + mostlyclean) \ || exit 1 -.PHONY: maybe-clean-target-libiberty clean-target-libiberty -maybe-clean-target-libiberty: +.PHONY: maybe-clean-textutils clean-textutils +maybe-clean-textutils: -clean-target-libiberty: - @[ -f $(TARGET_SUBDIR)/libiberty/Makefile ] || exit 0 ; \ +clean-textutils: + @[ -f ./textutils/Makefile ] || exit 0; \ r=`${PWD_COMMAND}`; export r; \ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ $(SET_LIB_PATH) \ - echo "Doing clean in $(TARGET_SUBDIR)/libiberty" ; \ - for flag in $(EXTRA_TARGET_FLAGS); do \ + for flag in $(EXTRA_HOST_FLAGS); do \ eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \ done; \ - (cd $(TARGET_SUBDIR)/libiberty && \ + echo "Doing clean in textutils" ; \ + (cd textutils && \ $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \ "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \ "RANLIB=$${RANLIB}" \ @@ -13659,363 +15685,284 @@ clean-target-libiberty: || exit 1 -.PHONY: maybe-clean-target-gperf clean-target-gperf -maybe-clean-target-gperf: +.PHONY: maybe-distclean-textutils distclean-textutils +maybe-distclean-textutils: -clean-target-gperf: - @[ -f $(TARGET_SUBDIR)/gperf/Makefile ] || exit 0 ; \ +distclean-textutils: + @[ -f ./textutils/Makefile ] || exit 0; \ r=`${PWD_COMMAND}`; export r; \ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ $(SET_LIB_PATH) \ - echo "Doing clean in $(TARGET_SUBDIR)/gperf" ; \ - for flag in $(EXTRA_TARGET_FLAGS); do \ + for flag in $(EXTRA_HOST_FLAGS); do \ eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \ done; \ - (cd $(TARGET_SUBDIR)/gperf && \ + echo "Doing distclean in textutils" ; \ + (cd textutils && \ $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \ "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \ "RANLIB=$${RANLIB}" \ "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" \ - clean) \ + distclean) \ || exit 1 -.PHONY: maybe-clean-target-examples clean-target-examples -maybe-clean-target-examples: +.PHONY: maybe-maintainer-clean-textutils maintainer-clean-textutils +maybe-maintainer-clean-textutils: -clean-target-examples: - @[ -f $(TARGET_SUBDIR)/examples/Makefile ] || exit 0 ; \ +maintainer-clean-textutils: + @[ -f ./textutils/Makefile ] || exit 0; \ r=`${PWD_COMMAND}`; export r; \ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ $(SET_LIB_PATH) \ - echo "Doing clean in $(TARGET_SUBDIR)/examples" ; \ - for flag in $(EXTRA_TARGET_FLAGS); do \ + for flag in $(EXTRA_HOST_FLAGS); do \ eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \ done; \ - (cd $(TARGET_SUBDIR)/examples && \ + echo "Doing maintainer-clean in textutils" ; \ + (cd textutils && \ $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \ "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \ "RANLIB=$${RANLIB}" \ "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" \ - clean) \ + maintainer-clean) \ || exit 1 -.PHONY: maybe-clean-target-libffi clean-target-libffi -maybe-clean-target-libffi: -clean-target-libffi: - @[ -f $(TARGET_SUBDIR)/libffi/Makefile ] || exit 0 ; \ +.PHONY: configure-time maybe-configure-time +maybe-configure-time: +configure-time: + @test ! -f time/Makefile || exit 0; \ + [ -d time ] || mkdir time; \ r=`${PWD_COMMAND}`; export r; \ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ - $(SET_LIB_PATH) \ - echo "Doing clean in $(TARGET_SUBDIR)/libffi" ; \ - for flag in $(EXTRA_TARGET_FLAGS); do \ - eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \ - done; \ - (cd $(TARGET_SUBDIR)/libffi && \ - $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \ - "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \ - "RANLIB=$${RANLIB}" \ - "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" \ - clean) \ + CC="$(CC)"; export CC; \ + CFLAGS="$(CFLAGS)"; export CFLAGS; \ + CONFIG_SHELL="$(SHELL)"; export CONFIG_SHELL; \ + CXX="$(CXX)"; export CXX; \ + CXXFLAGS="$(CXXFLAGS)"; export CXXFLAGS; \ + AR="$(AR)"; export AR; \ + AS="$(AS)"; export AS; \ + CC_FOR_BUILD="$(CC_FOR_BUILD)"; export CC_FOR_BUILD; \ + DLLTOOL="$(DLLTOOL)"; export DLLTOOL; \ + LD="$(LD)"; export LD; \ + NM="$(NM)"; export NM; \ + RANLIB="$(RANLIB)"; export RANLIB; \ + WINDRES="$(WINDRES)"; export WINDRES; \ + OBJCOPY="$(OBJCOPY)"; export OBJCOPY; \ + OBJDUMP="$(OBJDUMP)"; export OBJDUMP; \ + echo Configuring in time; \ + cd time || exit 1; \ + case $(srcdir) in \ + \.) \ + srcdiroption="--srcdir=."; \ + libsrcdir=".";; \ + /* | [A-Za-z]:[\\/]*) \ + srcdiroption="--srcdir=$(srcdir)/time"; \ + libsrcdir="$$s/time";; \ + *) \ + srcdiroption="--srcdir=../$(srcdir)/time"; \ + libsrcdir="$$s/time";; \ + esac; \ + $(SHELL) $${libsrcdir}/configure \ + $(HOST_CONFIGARGS) $${srcdiroption} \ || exit 1 +.PHONY: all-time maybe-all-time +maybe-all-time: +all-time: configure-time + @r=`${PWD_COMMAND}`; export r; \ + s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ + $(SET_LIB_PATH) \ + (cd time && $(MAKE) $(FLAGS_TO_PASS) all) -.PHONY: maybe-clean-target-libjava clean-target-libjava -maybe-clean-target-libjava: +.PHONY: check-time maybe-check-time +maybe-check-time: -clean-target-libjava: - @[ -f $(TARGET_SUBDIR)/libjava/Makefile ] || exit 0 ; \ - r=`${PWD_COMMAND}`; export r; \ +check-time: + @r=`${PWD_COMMAND}`; export r; \ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ $(SET_LIB_PATH) \ - echo "Doing clean in $(TARGET_SUBDIR)/libjava" ; \ - for flag in $(EXTRA_TARGET_FLAGS); do \ - eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \ - done; \ - (cd $(TARGET_SUBDIR)/libjava && \ - $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \ - "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \ - "RANLIB=$${RANLIB}" \ - "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" \ - clean) \ - || exit 1 + (cd time && $(MAKE) $(FLAGS_TO_PASS) check) -.PHONY: maybe-clean-target-zlib clean-target-zlib -maybe-clean-target-zlib: +.PHONY: install-time maybe-install-time +maybe-install-time: -clean-target-zlib: - @[ -f $(TARGET_SUBDIR)/zlib/Makefile ] || exit 0 ; \ - r=`${PWD_COMMAND}`; export r; \ +install-time: installdirs + @r=`${PWD_COMMAND}`; export r; \ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ $(SET_LIB_PATH) \ - echo "Doing clean in $(TARGET_SUBDIR)/zlib" ; \ - for flag in $(EXTRA_TARGET_FLAGS); do \ - eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \ - done; \ - (cd $(TARGET_SUBDIR)/zlib && \ - $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \ - "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \ - "RANLIB=$${RANLIB}" \ - "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" \ - clean) \ - || exit 1 + (cd time && $(MAKE) $(FLAGS_TO_PASS) install) -.PHONY: maybe-clean-target-boehm-gc clean-target-boehm-gc -maybe-clean-target-boehm-gc: +# Other targets (info, dvi, etc.) -clean-target-boehm-gc: - @[ -f $(TARGET_SUBDIR)/boehm-gc/Makefile ] || exit 0 ; \ +.PHONY: maybe-info-time info-time +maybe-info-time: + +info-time: \ + configure-time + @[ -f ./time/Makefile ] || exit 0; \ r=`${PWD_COMMAND}`; export r; \ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ $(SET_LIB_PATH) \ - echo "Doing clean in $(TARGET_SUBDIR)/boehm-gc" ; \ - for flag in $(EXTRA_TARGET_FLAGS); do \ + for flag in $(EXTRA_HOST_FLAGS); do \ eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \ done; \ - (cd $(TARGET_SUBDIR)/boehm-gc && \ + echo "Doing info in time" ; \ + (cd time && \ $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \ "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \ "RANLIB=$${RANLIB}" \ "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" \ - clean) \ + info) \ || exit 1 -.PHONY: maybe-clean-target-qthreads clean-target-qthreads -maybe-clean-target-qthreads: +.PHONY: maybe-dvi-time dvi-time +maybe-dvi-time: -clean-target-qthreads: - @[ -f $(TARGET_SUBDIR)/qthreads/Makefile ] || exit 0 ; \ +dvi-time: \ + configure-time + @[ -f ./time/Makefile ] || exit 0; \ r=`${PWD_COMMAND}`; export r; \ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ $(SET_LIB_PATH) \ - echo "Doing clean in $(TARGET_SUBDIR)/qthreads" ; \ - for flag in $(EXTRA_TARGET_FLAGS); do \ + for flag in $(EXTRA_HOST_FLAGS); do \ eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \ done; \ - (cd $(TARGET_SUBDIR)/qthreads && \ + echo "Doing dvi in time" ; \ + (cd time && \ $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \ "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \ "RANLIB=$${RANLIB}" \ "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" \ - clean) \ + dvi) \ || exit 1 -.PHONY: maybe-clean-target-rda clean-target-rda -maybe-clean-target-rda: +.PHONY: maybe-TAGS-time TAGS-time +maybe-TAGS-time: -clean-target-rda: - @[ -f $(TARGET_SUBDIR)/rda/Makefile ] || exit 0 ; \ +TAGS-time: \ + configure-time + @[ -f ./time/Makefile ] || exit 0; \ r=`${PWD_COMMAND}`; export r; \ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ $(SET_LIB_PATH) \ - echo "Doing clean in $(TARGET_SUBDIR)/rda" ; \ - for flag in $(EXTRA_TARGET_FLAGS); do \ + for flag in $(EXTRA_HOST_FLAGS); do \ eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \ done; \ - (cd $(TARGET_SUBDIR)/rda && \ + echo "Doing TAGS in time" ; \ + (cd time && \ $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \ "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \ "RANLIB=$${RANLIB}" \ "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" \ - clean) \ + TAGS) \ || exit 1 -.PHONY: maybe-clean-target-libada clean-target-libada -maybe-clean-target-libada: +.PHONY: maybe-install-info-time install-info-time +maybe-install-info-time: -clean-target-libada: - @[ -f $(TARGET_SUBDIR)/libada/Makefile ] || exit 0 ; \ +install-info-time: \ + configure-time \ + info-time + @[ -f ./time/Makefile ] || exit 0; \ r=`${PWD_COMMAND}`; export r; \ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ $(SET_LIB_PATH) \ - echo "Doing clean in $(TARGET_SUBDIR)/libada" ; \ - for flag in $(EXTRA_TARGET_FLAGS); do \ + for flag in $(EXTRA_HOST_FLAGS); do \ eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \ done; \ - (cd $(TARGET_SUBDIR)/libada && \ + echo "Doing install-info in time" ; \ + (cd time && \ $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \ "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \ "RANLIB=$${RANLIB}" \ "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" \ - clean) \ + install-info) \ || exit 1 +.PHONY: maybe-installcheck-time installcheck-time +maybe-installcheck-time: -.PHONY: do-distclean -do-distclean: distclean-host distclean-target - -.PHONY: distclean-host -distclean-host: maybe-distclean-gcc \ - maybe-distclean-ash \ - maybe-distclean-autoconf \ - maybe-distclean-automake \ - maybe-distclean-bash \ - maybe-distclean-bfd \ - maybe-distclean-opcodes \ - maybe-distclean-binutils \ - maybe-distclean-bison \ - maybe-distclean-byacc \ - maybe-distclean-bzip2 \ - maybe-distclean-dejagnu \ - maybe-distclean-diff \ - maybe-distclean-dosutils \ - maybe-distclean-etc \ - maybe-distclean-fastjar \ - maybe-distclean-fileutils \ - maybe-distclean-findutils \ - maybe-distclean-find \ - maybe-distclean-flex \ - maybe-distclean-gas \ - maybe-distclean-gawk \ - maybe-distclean-gettext \ - maybe-distclean-gnuserv \ - maybe-distclean-gprof \ - maybe-distclean-gzip \ - maybe-distclean-hello \ - maybe-distclean-indent \ - maybe-distclean-intl \ - maybe-distclean-tcl \ - maybe-distclean-itcl \ - maybe-distclean-ld \ - maybe-distclean-libgui \ - maybe-distclean-libiberty \ - maybe-distclean-libtool \ - maybe-distclean-m4 \ - maybe-distclean-make \ - maybe-distclean-mmalloc \ - maybe-distclean-patch \ - maybe-distclean-perl \ - maybe-distclean-prms \ - maybe-distclean-rcs \ - maybe-distclean-readline \ - maybe-distclean-release \ - maybe-distclean-recode \ - maybe-distclean-sed \ - maybe-distclean-send-pr \ - maybe-distclean-shellutils \ - maybe-distclean-sid \ - maybe-distclean-sim \ - maybe-distclean-tar \ - maybe-distclean-texinfo \ - maybe-distclean-textutils \ - maybe-distclean-time \ - maybe-distclean-uudecode \ - maybe-distclean-wdiff \ - maybe-distclean-zip \ - maybe-distclean-zlib \ - maybe-distclean-gdb \ - maybe-distclean-expect \ - maybe-distclean-guile \ - maybe-distclean-tk \ - maybe-distclean-tix \ - maybe-distclean-libtermcap \ - maybe-distclean-utils - -.PHONY: distclean-target -distclean-target: \ - maybe-distclean-target-libstdc++-v3 \ - maybe-distclean-target-newlib \ - maybe-distclean-target-libf2c \ - maybe-distclean-target-libobjc \ - maybe-distclean-target-libtermcap \ - maybe-distclean-target-winsup \ - maybe-distclean-target-libgloss \ - maybe-distclean-target-libiberty \ - maybe-distclean-target-gperf \ - maybe-distclean-target-examples \ - maybe-distclean-target-libffi \ - maybe-distclean-target-libjava \ - maybe-distclean-target-zlib \ - maybe-distclean-target-boehm-gc \ - maybe-distclean-target-qthreads \ - maybe-distclean-target-rda \ - maybe-distclean-target-libada - -# GCC, the eternal special case -.PHONY: maybe-distclean-gcc distclean-gcc -maybe-distclean-gcc: -distclean-gcc: - @[ -f ./gcc/Makefile ] || exit 0; \ +installcheck-time: \ + configure-time + @[ -f ./time/Makefile ] || exit 0; \ r=`${PWD_COMMAND}`; export r; \ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ $(SET_LIB_PATH) \ - for flag in $(EXTRA_GCC_FLAGS); do \ + for flag in $(EXTRA_HOST_FLAGS); do \ eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \ done; \ - echo "Doing distclean in gcc" ; \ - (cd gcc && \ + echo "Doing installcheck in time" ; \ + (cd time && \ $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \ "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \ "RANLIB=$${RANLIB}" \ "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" \ - distclean) \ + installcheck) \ || exit 1 -# Host modules. -.PHONY: maybe-distclean-ash distclean-ash -maybe-distclean-ash: +.PHONY: maybe-mostlyclean-time mostlyclean-time +maybe-mostlyclean-time: -distclean-ash: - @[ -f ./ash/Makefile ] || exit 0; \ +mostlyclean-time: + @[ -f ./time/Makefile ] || exit 0; \ r=`${PWD_COMMAND}`; export r; \ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ $(SET_LIB_PATH) \ for flag in $(EXTRA_HOST_FLAGS); do \ eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \ done; \ - echo "Doing distclean in ash" ; \ - (cd ash && \ + echo "Doing mostlyclean in time" ; \ + (cd time && \ $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \ "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \ "RANLIB=$${RANLIB}" \ "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" \ - distclean) \ + mostlyclean) \ || exit 1 -.PHONY: maybe-distclean-autoconf distclean-autoconf -maybe-distclean-autoconf: +.PHONY: maybe-clean-time clean-time +maybe-clean-time: -distclean-autoconf: - @[ -f ./autoconf/Makefile ] || exit 0; \ +clean-time: + @[ -f ./time/Makefile ] || exit 0; \ r=`${PWD_COMMAND}`; export r; \ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ $(SET_LIB_PATH) \ for flag in $(EXTRA_HOST_FLAGS); do \ eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \ done; \ - echo "Doing distclean in autoconf" ; \ - (cd autoconf && \ + echo "Doing clean in time" ; \ + (cd time && \ $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \ "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \ "RANLIB=$${RANLIB}" \ "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" \ - distclean) \ + clean) \ || exit 1 -.PHONY: maybe-distclean-automake distclean-automake -maybe-distclean-automake: +.PHONY: maybe-distclean-time distclean-time +maybe-distclean-time: -distclean-automake: - @[ -f ./automake/Makefile ] || exit 0; \ +distclean-time: + @[ -f ./time/Makefile ] || exit 0; \ r=`${PWD_COMMAND}`; export r; \ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ $(SET_LIB_PATH) \ for flag in $(EXTRA_HOST_FLAGS); do \ eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \ done; \ - echo "Doing distclean in automake" ; \ - (cd automake && \ + echo "Doing distclean in time" ; \ + (cd time && \ $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \ "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \ "RANLIB=$${RANLIB}" \ @@ -14024,250 +15971,263 @@ distclean-automake: || exit 1 -.PHONY: maybe-distclean-bash distclean-bash -maybe-distclean-bash: +.PHONY: maybe-maintainer-clean-time maintainer-clean-time +maybe-maintainer-clean-time: -distclean-bash: - @[ -f ./bash/Makefile ] || exit 0; \ +maintainer-clean-time: + @[ -f ./time/Makefile ] || exit 0; \ r=`${PWD_COMMAND}`; export r; \ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ $(SET_LIB_PATH) \ for flag in $(EXTRA_HOST_FLAGS); do \ eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \ done; \ - echo "Doing distclean in bash" ; \ - (cd bash && \ + echo "Doing maintainer-clean in time" ; \ + (cd time && \ $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \ "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \ "RANLIB=$${RANLIB}" \ "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" \ - distclean) \ + maintainer-clean) \ || exit 1 -.PHONY: maybe-distclean-bfd distclean-bfd -maybe-distclean-bfd: -distclean-bfd: - @[ -f ./bfd/Makefile ] || exit 0; \ +.PHONY: configure-uudecode maybe-configure-uudecode +maybe-configure-uudecode: +configure-uudecode: + @test ! -f uudecode/Makefile || exit 0; \ + [ -d uudecode ] || mkdir uudecode; \ r=`${PWD_COMMAND}`; export r; \ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ - $(SET_LIB_PATH) \ - for flag in $(EXTRA_HOST_FLAGS); do \ - eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \ - done; \ - echo "Doing distclean in bfd" ; \ - (cd bfd && \ - $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \ - "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \ - "RANLIB=$${RANLIB}" \ - "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" \ - distclean) \ + CC="$(CC)"; export CC; \ + CFLAGS="$(CFLAGS)"; export CFLAGS; \ + CONFIG_SHELL="$(SHELL)"; export CONFIG_SHELL; \ + CXX="$(CXX)"; export CXX; \ + CXXFLAGS="$(CXXFLAGS)"; export CXXFLAGS; \ + AR="$(AR)"; export AR; \ + AS="$(AS)"; export AS; \ + CC_FOR_BUILD="$(CC_FOR_BUILD)"; export CC_FOR_BUILD; \ + DLLTOOL="$(DLLTOOL)"; export DLLTOOL; \ + LD="$(LD)"; export LD; \ + NM="$(NM)"; export NM; \ + RANLIB="$(RANLIB)"; export RANLIB; \ + WINDRES="$(WINDRES)"; export WINDRES; \ + OBJCOPY="$(OBJCOPY)"; export OBJCOPY; \ + OBJDUMP="$(OBJDUMP)"; export OBJDUMP; \ + echo Configuring in uudecode; \ + cd uudecode || exit 1; \ + case $(srcdir) in \ + \.) \ + srcdiroption="--srcdir=."; \ + libsrcdir=".";; \ + /* | [A-Za-z]:[\\/]*) \ + srcdiroption="--srcdir=$(srcdir)/uudecode"; \ + libsrcdir="$$s/uudecode";; \ + *) \ + srcdiroption="--srcdir=../$(srcdir)/uudecode"; \ + libsrcdir="$$s/uudecode";; \ + esac; \ + $(SHELL) $${libsrcdir}/configure \ + $(HOST_CONFIGARGS) $${srcdiroption} \ || exit 1 +.PHONY: all-uudecode maybe-all-uudecode +maybe-all-uudecode: +all-uudecode: configure-uudecode + @r=`${PWD_COMMAND}`; export r; \ + s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ + $(SET_LIB_PATH) \ + (cd uudecode && $(MAKE) $(FLAGS_TO_PASS) all) -.PHONY: maybe-distclean-opcodes distclean-opcodes -maybe-distclean-opcodes: +.PHONY: check-uudecode maybe-check-uudecode +maybe-check-uudecode: -distclean-opcodes: - @[ -f ./opcodes/Makefile ] || exit 0; \ - r=`${PWD_COMMAND}`; export r; \ +check-uudecode: + @r=`${PWD_COMMAND}`; export r; \ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ $(SET_LIB_PATH) \ - for flag in $(EXTRA_HOST_FLAGS); do \ - eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \ - done; \ - echo "Doing distclean in opcodes" ; \ - (cd opcodes && \ - $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \ - "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \ - "RANLIB=$${RANLIB}" \ - "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" \ - distclean) \ - || exit 1 + (cd uudecode && $(MAKE) $(FLAGS_TO_PASS) check) -.PHONY: maybe-distclean-binutils distclean-binutils -maybe-distclean-binutils: +.PHONY: install-uudecode maybe-install-uudecode +maybe-install-uudecode: -distclean-binutils: - @[ -f ./binutils/Makefile ] || exit 0; \ - r=`${PWD_COMMAND}`; export r; \ +install-uudecode: installdirs + @r=`${PWD_COMMAND}`; export r; \ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ $(SET_LIB_PATH) \ - for flag in $(EXTRA_HOST_FLAGS); do \ - eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \ - done; \ - echo "Doing distclean in binutils" ; \ - (cd binutils && \ - $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \ - "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \ - "RANLIB=$${RANLIB}" \ - "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" \ - distclean) \ - || exit 1 + (cd uudecode && $(MAKE) $(FLAGS_TO_PASS) install) -.PHONY: maybe-distclean-bison distclean-bison -maybe-distclean-bison: +# Other targets (info, dvi, etc.) -distclean-bison: - @[ -f ./bison/Makefile ] || exit 0; \ +.PHONY: maybe-info-uudecode info-uudecode +maybe-info-uudecode: + +info-uudecode: \ + configure-uudecode + @[ -f ./uudecode/Makefile ] || exit 0; \ r=`${PWD_COMMAND}`; export r; \ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ $(SET_LIB_PATH) \ for flag in $(EXTRA_HOST_FLAGS); do \ eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \ done; \ - echo "Doing distclean in bison" ; \ - (cd bison && \ + echo "Doing info in uudecode" ; \ + (cd uudecode && \ $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \ "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \ "RANLIB=$${RANLIB}" \ "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" \ - distclean) \ + info) \ || exit 1 -.PHONY: maybe-distclean-byacc distclean-byacc -maybe-distclean-byacc: +.PHONY: maybe-dvi-uudecode dvi-uudecode +maybe-dvi-uudecode: -distclean-byacc: - @[ -f ./byacc/Makefile ] || exit 0; \ +dvi-uudecode: \ + configure-uudecode + @[ -f ./uudecode/Makefile ] || exit 0; \ r=`${PWD_COMMAND}`; export r; \ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ $(SET_LIB_PATH) \ for flag in $(EXTRA_HOST_FLAGS); do \ eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \ done; \ - echo "Doing distclean in byacc" ; \ - (cd byacc && \ + echo "Doing dvi in uudecode" ; \ + (cd uudecode && \ $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \ "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \ "RANLIB=$${RANLIB}" \ "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" \ - distclean) \ + dvi) \ || exit 1 -.PHONY: maybe-distclean-bzip2 distclean-bzip2 -maybe-distclean-bzip2: +.PHONY: maybe-TAGS-uudecode TAGS-uudecode +maybe-TAGS-uudecode: -distclean-bzip2: - @[ -f ./bzip2/Makefile ] || exit 0; \ +TAGS-uudecode: \ + configure-uudecode + @[ -f ./uudecode/Makefile ] || exit 0; \ r=`${PWD_COMMAND}`; export r; \ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ $(SET_LIB_PATH) \ for flag in $(EXTRA_HOST_FLAGS); do \ eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \ done; \ - echo "Doing distclean in bzip2" ; \ - (cd bzip2 && \ + echo "Doing TAGS in uudecode" ; \ + (cd uudecode && \ $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \ "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \ "RANLIB=$${RANLIB}" \ "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" \ - distclean) \ + TAGS) \ || exit 1 -.PHONY: maybe-distclean-dejagnu distclean-dejagnu -maybe-distclean-dejagnu: +.PHONY: maybe-install-info-uudecode install-info-uudecode +maybe-install-info-uudecode: -distclean-dejagnu: - @[ -f ./dejagnu/Makefile ] || exit 0; \ +install-info-uudecode: \ + configure-uudecode \ + info-uudecode + @[ -f ./uudecode/Makefile ] || exit 0; \ r=`${PWD_COMMAND}`; export r; \ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ $(SET_LIB_PATH) \ for flag in $(EXTRA_HOST_FLAGS); do \ eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \ done; \ - echo "Doing distclean in dejagnu" ; \ - (cd dejagnu && \ + echo "Doing install-info in uudecode" ; \ + (cd uudecode && \ $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \ "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \ "RANLIB=$${RANLIB}" \ "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" \ - distclean) \ + install-info) \ || exit 1 -.PHONY: maybe-distclean-diff distclean-diff -maybe-distclean-diff: +.PHONY: maybe-installcheck-uudecode installcheck-uudecode +maybe-installcheck-uudecode: -distclean-diff: - @[ -f ./diff/Makefile ] || exit 0; \ +installcheck-uudecode: \ + configure-uudecode + @[ -f ./uudecode/Makefile ] || exit 0; \ r=`${PWD_COMMAND}`; export r; \ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ $(SET_LIB_PATH) \ for flag in $(EXTRA_HOST_FLAGS); do \ eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \ done; \ - echo "Doing distclean in diff" ; \ - (cd diff && \ + echo "Doing installcheck in uudecode" ; \ + (cd uudecode && \ $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \ "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \ "RANLIB=$${RANLIB}" \ "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" \ - distclean) \ + installcheck) \ || exit 1 -.PHONY: maybe-distclean-dosutils distclean-dosutils -maybe-distclean-dosutils: +.PHONY: maybe-mostlyclean-uudecode mostlyclean-uudecode +maybe-mostlyclean-uudecode: -distclean-dosutils: - @[ -f ./dosutils/Makefile ] || exit 0; \ +mostlyclean-uudecode: + @[ -f ./uudecode/Makefile ] || exit 0; \ r=`${PWD_COMMAND}`; export r; \ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ $(SET_LIB_PATH) \ for flag in $(EXTRA_HOST_FLAGS); do \ eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \ done; \ - echo "Doing distclean in dosutils" ; \ - (cd dosutils && \ + echo "Doing mostlyclean in uudecode" ; \ + (cd uudecode && \ $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \ "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \ "RANLIB=$${RANLIB}" \ "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" \ - distclean) \ + mostlyclean) \ || exit 1 -.PHONY: maybe-distclean-etc distclean-etc -maybe-distclean-etc: +.PHONY: maybe-clean-uudecode clean-uudecode +maybe-clean-uudecode: -distclean-etc: - @[ -f ./etc/Makefile ] || exit 0; \ +clean-uudecode: + @[ -f ./uudecode/Makefile ] || exit 0; \ r=`${PWD_COMMAND}`; export r; \ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ $(SET_LIB_PATH) \ for flag in $(EXTRA_HOST_FLAGS); do \ eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \ done; \ - echo "Doing distclean in etc" ; \ - (cd etc && \ + echo "Doing clean in uudecode" ; \ + (cd uudecode && \ $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \ "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \ "RANLIB=$${RANLIB}" \ "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" \ - distclean) \ + clean) \ || exit 1 -.PHONY: maybe-distclean-fastjar distclean-fastjar -maybe-distclean-fastjar: +.PHONY: maybe-distclean-uudecode distclean-uudecode +maybe-distclean-uudecode: -distclean-fastjar: - @[ -f ./fastjar/Makefile ] || exit 0; \ +distclean-uudecode: + @[ -f ./uudecode/Makefile ] || exit 0; \ r=`${PWD_COMMAND}`; export r; \ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ $(SET_LIB_PATH) \ for flag in $(EXTRA_HOST_FLAGS); do \ eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \ done; \ - echo "Doing distclean in fastjar" ; \ - (cd fastjar && \ + echo "Doing distclean in uudecode" ; \ + (cd uudecode && \ $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \ "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \ "RANLIB=$${RANLIB}" \ @@ -14276,250 +16236,263 @@ distclean-fastjar: || exit 1 -.PHONY: maybe-distclean-fileutils distclean-fileutils -maybe-distclean-fileutils: +.PHONY: maybe-maintainer-clean-uudecode maintainer-clean-uudecode +maybe-maintainer-clean-uudecode: -distclean-fileutils: - @[ -f ./fileutils/Makefile ] || exit 0; \ +maintainer-clean-uudecode: + @[ -f ./uudecode/Makefile ] || exit 0; \ r=`${PWD_COMMAND}`; export r; \ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ $(SET_LIB_PATH) \ for flag in $(EXTRA_HOST_FLAGS); do \ eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \ done; \ - echo "Doing distclean in fileutils" ; \ - (cd fileutils && \ + echo "Doing maintainer-clean in uudecode" ; \ + (cd uudecode && \ $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \ "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \ "RANLIB=$${RANLIB}" \ "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" \ - distclean) \ + maintainer-clean) \ || exit 1 -.PHONY: maybe-distclean-findutils distclean-findutils -maybe-distclean-findutils: -distclean-findutils: - @[ -f ./findutils/Makefile ] || exit 0; \ +.PHONY: configure-wdiff maybe-configure-wdiff +maybe-configure-wdiff: +configure-wdiff: + @test ! -f wdiff/Makefile || exit 0; \ + [ -d wdiff ] || mkdir wdiff; \ r=`${PWD_COMMAND}`; export r; \ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ - $(SET_LIB_PATH) \ - for flag in $(EXTRA_HOST_FLAGS); do \ - eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \ - done; \ - echo "Doing distclean in findutils" ; \ - (cd findutils && \ - $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \ - "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \ - "RANLIB=$${RANLIB}" \ - "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" \ - distclean) \ + CC="$(CC)"; export CC; \ + CFLAGS="$(CFLAGS)"; export CFLAGS; \ + CONFIG_SHELL="$(SHELL)"; export CONFIG_SHELL; \ + CXX="$(CXX)"; export CXX; \ + CXXFLAGS="$(CXXFLAGS)"; export CXXFLAGS; \ + AR="$(AR)"; export AR; \ + AS="$(AS)"; export AS; \ + CC_FOR_BUILD="$(CC_FOR_BUILD)"; export CC_FOR_BUILD; \ + DLLTOOL="$(DLLTOOL)"; export DLLTOOL; \ + LD="$(LD)"; export LD; \ + NM="$(NM)"; export NM; \ + RANLIB="$(RANLIB)"; export RANLIB; \ + WINDRES="$(WINDRES)"; export WINDRES; \ + OBJCOPY="$(OBJCOPY)"; export OBJCOPY; \ + OBJDUMP="$(OBJDUMP)"; export OBJDUMP; \ + echo Configuring in wdiff; \ + cd wdiff || exit 1; \ + case $(srcdir) in \ + \.) \ + srcdiroption="--srcdir=."; \ + libsrcdir=".";; \ + /* | [A-Za-z]:[\\/]*) \ + srcdiroption="--srcdir=$(srcdir)/wdiff"; \ + libsrcdir="$$s/wdiff";; \ + *) \ + srcdiroption="--srcdir=../$(srcdir)/wdiff"; \ + libsrcdir="$$s/wdiff";; \ + esac; \ + $(SHELL) $${libsrcdir}/configure \ + $(HOST_CONFIGARGS) $${srcdiroption} \ || exit 1 +.PHONY: all-wdiff maybe-all-wdiff +maybe-all-wdiff: +all-wdiff: configure-wdiff + @r=`${PWD_COMMAND}`; export r; \ + s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ + $(SET_LIB_PATH) \ + (cd wdiff && $(MAKE) $(FLAGS_TO_PASS) all) -.PHONY: maybe-distclean-find distclean-find -maybe-distclean-find: +.PHONY: check-wdiff maybe-check-wdiff +maybe-check-wdiff: -distclean-find: - @[ -f ./find/Makefile ] || exit 0; \ - r=`${PWD_COMMAND}`; export r; \ +check-wdiff: + @r=`${PWD_COMMAND}`; export r; \ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ $(SET_LIB_PATH) \ - for flag in $(EXTRA_HOST_FLAGS); do \ - eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \ - done; \ - echo "Doing distclean in find" ; \ - (cd find && \ - $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \ - "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \ - "RANLIB=$${RANLIB}" \ - "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" \ - distclean) \ - || exit 1 + (cd wdiff && $(MAKE) $(FLAGS_TO_PASS) check) -.PHONY: maybe-distclean-flex distclean-flex -maybe-distclean-flex: +.PHONY: install-wdiff maybe-install-wdiff +maybe-install-wdiff: -distclean-flex: - @[ -f ./flex/Makefile ] || exit 0; \ - r=`${PWD_COMMAND}`; export r; \ +install-wdiff: installdirs + @r=`${PWD_COMMAND}`; export r; \ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ $(SET_LIB_PATH) \ - for flag in $(EXTRA_HOST_FLAGS); do \ - eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \ - done; \ - echo "Doing distclean in flex" ; \ - (cd flex && \ - $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \ - "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \ - "RANLIB=$${RANLIB}" \ - "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" \ - distclean) \ - || exit 1 + (cd wdiff && $(MAKE) $(FLAGS_TO_PASS) install) -.PHONY: maybe-distclean-gas distclean-gas -maybe-distclean-gas: +# Other targets (info, dvi, etc.) -distclean-gas: - @[ -f ./gas/Makefile ] || exit 0; \ +.PHONY: maybe-info-wdiff info-wdiff +maybe-info-wdiff: + +info-wdiff: \ + configure-wdiff + @[ -f ./wdiff/Makefile ] || exit 0; \ r=`${PWD_COMMAND}`; export r; \ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ $(SET_LIB_PATH) \ for flag in $(EXTRA_HOST_FLAGS); do \ eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \ done; \ - echo "Doing distclean in gas" ; \ - (cd gas && \ + echo "Doing info in wdiff" ; \ + (cd wdiff && \ $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \ "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \ "RANLIB=$${RANLIB}" \ "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" \ - distclean) \ + info) \ || exit 1 -.PHONY: maybe-distclean-gawk distclean-gawk -maybe-distclean-gawk: +.PHONY: maybe-dvi-wdiff dvi-wdiff +maybe-dvi-wdiff: -distclean-gawk: - @[ -f ./gawk/Makefile ] || exit 0; \ +dvi-wdiff: \ + configure-wdiff + @[ -f ./wdiff/Makefile ] || exit 0; \ r=`${PWD_COMMAND}`; export r; \ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ $(SET_LIB_PATH) \ for flag in $(EXTRA_HOST_FLAGS); do \ eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \ done; \ - echo "Doing distclean in gawk" ; \ - (cd gawk && \ + echo "Doing dvi in wdiff" ; \ + (cd wdiff && \ $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \ "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \ "RANLIB=$${RANLIB}" \ "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" \ - distclean) \ + dvi) \ || exit 1 -.PHONY: maybe-distclean-gettext distclean-gettext -maybe-distclean-gettext: +.PHONY: maybe-TAGS-wdiff TAGS-wdiff +maybe-TAGS-wdiff: -distclean-gettext: - @[ -f ./gettext/Makefile ] || exit 0; \ +TAGS-wdiff: \ + configure-wdiff + @[ -f ./wdiff/Makefile ] || exit 0; \ r=`${PWD_COMMAND}`; export r; \ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ $(SET_LIB_PATH) \ for flag in $(EXTRA_HOST_FLAGS); do \ eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \ done; \ - echo "Doing distclean in gettext" ; \ - (cd gettext && \ + echo "Doing TAGS in wdiff" ; \ + (cd wdiff && \ $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \ "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \ "RANLIB=$${RANLIB}" \ "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" \ - distclean) \ + TAGS) \ || exit 1 -.PHONY: maybe-distclean-gnuserv distclean-gnuserv -maybe-distclean-gnuserv: +.PHONY: maybe-install-info-wdiff install-info-wdiff +maybe-install-info-wdiff: -distclean-gnuserv: - @[ -f ./gnuserv/Makefile ] || exit 0; \ +install-info-wdiff: \ + configure-wdiff \ + info-wdiff + @[ -f ./wdiff/Makefile ] || exit 0; \ r=`${PWD_COMMAND}`; export r; \ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ $(SET_LIB_PATH) \ for flag in $(EXTRA_HOST_FLAGS); do \ eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \ done; \ - echo "Doing distclean in gnuserv" ; \ - (cd gnuserv && \ + echo "Doing install-info in wdiff" ; \ + (cd wdiff && \ $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \ "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \ "RANLIB=$${RANLIB}" \ "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" \ - distclean) \ + install-info) \ || exit 1 -.PHONY: maybe-distclean-gprof distclean-gprof -maybe-distclean-gprof: +.PHONY: maybe-installcheck-wdiff installcheck-wdiff +maybe-installcheck-wdiff: -distclean-gprof: - @[ -f ./gprof/Makefile ] || exit 0; \ +installcheck-wdiff: \ + configure-wdiff + @[ -f ./wdiff/Makefile ] || exit 0; \ r=`${PWD_COMMAND}`; export r; \ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ $(SET_LIB_PATH) \ for flag in $(EXTRA_HOST_FLAGS); do \ eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \ done; \ - echo "Doing distclean in gprof" ; \ - (cd gprof && \ + echo "Doing installcheck in wdiff" ; \ + (cd wdiff && \ $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \ "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \ "RANLIB=$${RANLIB}" \ "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" \ - distclean) \ + installcheck) \ || exit 1 -.PHONY: maybe-distclean-gzip distclean-gzip -maybe-distclean-gzip: +.PHONY: maybe-mostlyclean-wdiff mostlyclean-wdiff +maybe-mostlyclean-wdiff: -distclean-gzip: - @[ -f ./gzip/Makefile ] || exit 0; \ +mostlyclean-wdiff: + @[ -f ./wdiff/Makefile ] || exit 0; \ r=`${PWD_COMMAND}`; export r; \ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ $(SET_LIB_PATH) \ for flag in $(EXTRA_HOST_FLAGS); do \ eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \ done; \ - echo "Doing distclean in gzip" ; \ - (cd gzip && \ + echo "Doing mostlyclean in wdiff" ; \ + (cd wdiff && \ $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \ "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \ "RANLIB=$${RANLIB}" \ "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" \ - distclean) \ + mostlyclean) \ || exit 1 -.PHONY: maybe-distclean-hello distclean-hello -maybe-distclean-hello: +.PHONY: maybe-clean-wdiff clean-wdiff +maybe-clean-wdiff: -distclean-hello: - @[ -f ./hello/Makefile ] || exit 0; \ +clean-wdiff: + @[ -f ./wdiff/Makefile ] || exit 0; \ r=`${PWD_COMMAND}`; export r; \ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ $(SET_LIB_PATH) \ for flag in $(EXTRA_HOST_FLAGS); do \ eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \ done; \ - echo "Doing distclean in hello" ; \ - (cd hello && \ + echo "Doing clean in wdiff" ; \ + (cd wdiff && \ $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \ "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \ "RANLIB=$${RANLIB}" \ "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" \ - distclean) \ + clean) \ || exit 1 -.PHONY: maybe-distclean-indent distclean-indent -maybe-distclean-indent: +.PHONY: maybe-distclean-wdiff distclean-wdiff +maybe-distclean-wdiff: -distclean-indent: - @[ -f ./indent/Makefile ] || exit 0; \ +distclean-wdiff: + @[ -f ./wdiff/Makefile ] || exit 0; \ r=`${PWD_COMMAND}`; export r; \ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ $(SET_LIB_PATH) \ for flag in $(EXTRA_HOST_FLAGS); do \ eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \ done; \ - echo "Doing distclean in indent" ; \ - (cd indent && \ + echo "Doing distclean in wdiff" ; \ + (cd wdiff && \ $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \ "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \ "RANLIB=$${RANLIB}" \ @@ -14528,208 +16501,266 @@ distclean-indent: || exit 1 -.PHONY: maybe-distclean-intl distclean-intl -maybe-distclean-intl: +.PHONY: maybe-maintainer-clean-wdiff maintainer-clean-wdiff +maybe-maintainer-clean-wdiff: -distclean-intl: - @[ -f ./intl/Makefile ] || exit 0; \ +maintainer-clean-wdiff: + @[ -f ./wdiff/Makefile ] || exit 0; \ r=`${PWD_COMMAND}`; export r; \ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ $(SET_LIB_PATH) \ for flag in $(EXTRA_HOST_FLAGS); do \ eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \ done; \ - echo "Doing distclean in intl" ; \ - (cd intl && \ + echo "Doing maintainer-clean in wdiff" ; \ + (cd wdiff && \ $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \ "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \ "RANLIB=$${RANLIB}" \ "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" \ - distclean) \ + maintainer-clean) \ || exit 1 -.PHONY: maybe-distclean-tcl distclean-tcl -maybe-distclean-tcl: -distclean-tcl: - @[ -f ./tcl/Makefile ] || exit 0; \ +.PHONY: configure-zip maybe-configure-zip +maybe-configure-zip: +configure-zip: + @test ! -f zip/Makefile || exit 0; \ + [ -d zip ] || mkdir zip; \ r=`${PWD_COMMAND}`; export r; \ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ - $(SET_LIB_PATH) \ - for flag in $(EXTRA_HOST_FLAGS); do \ - eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \ - done; \ - echo "Doing distclean in tcl" ; \ - (cd tcl && \ - $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \ - "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \ - "RANLIB=$${RANLIB}" \ - "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" \ - distclean) \ + CC="$(CC)"; export CC; \ + CFLAGS="$(CFLAGS)"; export CFLAGS; \ + CONFIG_SHELL="$(SHELL)"; export CONFIG_SHELL; \ + CXX="$(CXX)"; export CXX; \ + CXXFLAGS="$(CXXFLAGS)"; export CXXFLAGS; \ + AR="$(AR)"; export AR; \ + AS="$(AS)"; export AS; \ + CC_FOR_BUILD="$(CC_FOR_BUILD)"; export CC_FOR_BUILD; \ + DLLTOOL="$(DLLTOOL)"; export DLLTOOL; \ + LD="$(LD)"; export LD; \ + NM="$(NM)"; export NM; \ + RANLIB="$(RANLIB)"; export RANLIB; \ + WINDRES="$(WINDRES)"; export WINDRES; \ + OBJCOPY="$(OBJCOPY)"; export OBJCOPY; \ + OBJDUMP="$(OBJDUMP)"; export OBJDUMP; \ + echo Configuring in zip; \ + cd zip || exit 1; \ + case $(srcdir) in \ + \.) \ + srcdiroption="--srcdir=."; \ + libsrcdir=".";; \ + /* | [A-Za-z]:[\\/]*) \ + srcdiroption="--srcdir=$(srcdir)/zip"; \ + libsrcdir="$$s/zip";; \ + *) \ + srcdiroption="--srcdir=../$(srcdir)/zip"; \ + libsrcdir="$$s/zip";; \ + esac; \ + $(SHELL) $${libsrcdir}/configure \ + $(HOST_CONFIGARGS) $${srcdiroption} \ || exit 1 +.PHONY: all-zip maybe-all-zip +maybe-all-zip: +all-zip: configure-zip + @r=`${PWD_COMMAND}`; export r; \ + s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ + $(SET_LIB_PATH) \ + (cd zip && $(MAKE) $(FLAGS_TO_PASS) all) -.PHONY: maybe-distclean-itcl distclean-itcl -maybe-distclean-itcl: +.PHONY: check-zip maybe-check-zip +maybe-check-zip: -distclean-itcl: - @[ -f ./itcl/Makefile ] || exit 0; \ +# This module is only tested in a native toolchain. +check-zip: + @if [ '$(host)' = '$(target)' ] ; then \ + r=`${PWD_COMMAND}`; export r; \ + s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ + $(SET_LIB_PATH) \ + (cd zip && $(MAKE) $(FLAGS_TO_PASS) check); \ + fi + + +.PHONY: install-zip maybe-install-zip +maybe-install-zip: + +install-zip: installdirs + @r=`${PWD_COMMAND}`; export r; \ + s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ + $(SET_LIB_PATH) \ + (cd zip && $(MAKE) $(FLAGS_TO_PASS) install) + + +# Other targets (info, dvi, etc.) + +.PHONY: maybe-info-zip info-zip +maybe-info-zip: + +info-zip: \ + configure-zip + @[ -f ./zip/Makefile ] || exit 0; \ r=`${PWD_COMMAND}`; export r; \ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ $(SET_LIB_PATH) \ for flag in $(EXTRA_HOST_FLAGS); do \ eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \ done; \ - echo "Doing distclean in itcl" ; \ - (cd itcl && \ + echo "Doing info in zip" ; \ + (cd zip && \ $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \ "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \ "RANLIB=$${RANLIB}" \ "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" \ - distclean) \ + info) \ || exit 1 -.PHONY: maybe-distclean-ld distclean-ld -maybe-distclean-ld: +.PHONY: maybe-dvi-zip dvi-zip +maybe-dvi-zip: -distclean-ld: - @[ -f ./ld/Makefile ] || exit 0; \ +dvi-zip: \ + configure-zip + @[ -f ./zip/Makefile ] || exit 0; \ r=`${PWD_COMMAND}`; export r; \ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ $(SET_LIB_PATH) \ for flag in $(EXTRA_HOST_FLAGS); do \ eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \ done; \ - echo "Doing distclean in ld" ; \ - (cd ld && \ + echo "Doing dvi in zip" ; \ + (cd zip && \ $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \ "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \ "RANLIB=$${RANLIB}" \ "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" \ - distclean) \ + dvi) \ || exit 1 -.PHONY: maybe-distclean-libgui distclean-libgui -maybe-distclean-libgui: +.PHONY: maybe-TAGS-zip TAGS-zip +maybe-TAGS-zip: -distclean-libgui: - @[ -f ./libgui/Makefile ] || exit 0; \ +TAGS-zip: \ + configure-zip + @[ -f ./zip/Makefile ] || exit 0; \ r=`${PWD_COMMAND}`; export r; \ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ $(SET_LIB_PATH) \ for flag in $(EXTRA_HOST_FLAGS); do \ eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \ done; \ - echo "Doing distclean in libgui" ; \ - (cd libgui && \ + echo "Doing TAGS in zip" ; \ + (cd zip && \ $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \ "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \ "RANLIB=$${RANLIB}" \ "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" \ - distclean) \ + TAGS) \ || exit 1 -.PHONY: maybe-distclean-libiberty distclean-libiberty -maybe-distclean-libiberty: +.PHONY: maybe-install-info-zip install-info-zip +maybe-install-info-zip: -distclean-libiberty: - @[ -f ./libiberty/Makefile ] || exit 0; \ +install-info-zip: \ + configure-zip \ + info-zip + @[ -f ./zip/Makefile ] || exit 0; \ r=`${PWD_COMMAND}`; export r; \ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ $(SET_LIB_PATH) \ for flag in $(EXTRA_HOST_FLAGS); do \ eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \ done; \ - echo "Doing distclean in libiberty" ; \ - (cd libiberty && \ + echo "Doing install-info in zip" ; \ + (cd zip && \ $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \ "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \ "RANLIB=$${RANLIB}" \ "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" \ - distclean) \ + install-info) \ || exit 1 -.PHONY: maybe-distclean-libtool distclean-libtool -maybe-distclean-libtool: +.PHONY: maybe-installcheck-zip installcheck-zip +maybe-installcheck-zip: -distclean-libtool: - @[ -f ./libtool/Makefile ] || exit 0; \ +installcheck-zip: \ + configure-zip + @[ -f ./zip/Makefile ] || exit 0; \ r=`${PWD_COMMAND}`; export r; \ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ $(SET_LIB_PATH) \ for flag in $(EXTRA_HOST_FLAGS); do \ eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \ done; \ - echo "Doing distclean in libtool" ; \ - (cd libtool && \ + echo "Doing installcheck in zip" ; \ + (cd zip && \ $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \ "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \ "RANLIB=$${RANLIB}" \ "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" \ - distclean) \ + installcheck) \ || exit 1 -.PHONY: maybe-distclean-m4 distclean-m4 -maybe-distclean-m4: +.PHONY: maybe-mostlyclean-zip mostlyclean-zip +maybe-mostlyclean-zip: -distclean-m4: - @[ -f ./m4/Makefile ] || exit 0; \ +mostlyclean-zip: + @[ -f ./zip/Makefile ] || exit 0; \ r=`${PWD_COMMAND}`; export r; \ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ $(SET_LIB_PATH) \ for flag in $(EXTRA_HOST_FLAGS); do \ eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \ done; \ - echo "Doing distclean in m4" ; \ - (cd m4 && \ + echo "Doing mostlyclean in zip" ; \ + (cd zip && \ $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \ "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \ "RANLIB=$${RANLIB}" \ "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" \ - distclean) \ + mostlyclean) \ || exit 1 -.PHONY: maybe-distclean-make distclean-make -maybe-distclean-make: +.PHONY: maybe-clean-zip clean-zip +maybe-clean-zip: -distclean-make: - @[ -f ./make/Makefile ] || exit 0; \ +clean-zip: + @[ -f ./zip/Makefile ] || exit 0; \ r=`${PWD_COMMAND}`; export r; \ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ $(SET_LIB_PATH) \ for flag in $(EXTRA_HOST_FLAGS); do \ eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \ done; \ - echo "Doing distclean in make" ; \ - (cd make && \ + echo "Doing clean in zip" ; \ + (cd zip && \ $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \ "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \ "RANLIB=$${RANLIB}" \ "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" \ - distclean) \ + clean) \ || exit 1 -.PHONY: maybe-distclean-mmalloc distclean-mmalloc -maybe-distclean-mmalloc: +.PHONY: maybe-distclean-zip distclean-zip +maybe-distclean-zip: -distclean-mmalloc: - @[ -f ./mmalloc/Makefile ] || exit 0; \ +distclean-zip: + @[ -f ./zip/Makefile ] || exit 0; \ r=`${PWD_COMMAND}`; export r; \ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ $(SET_LIB_PATH) \ for flag in $(EXTRA_HOST_FLAGS); do \ eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \ done; \ - echo "Doing distclean in mmalloc" ; \ - (cd mmalloc && \ + echo "Doing distclean in zip" ; \ + (cd zip && \ $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \ "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \ "RANLIB=$${RANLIB}" \ @@ -14738,208 +16769,255 @@ distclean-mmalloc: || exit 1 -.PHONY: maybe-distclean-patch distclean-patch -maybe-distclean-patch: +.PHONY: maybe-maintainer-clean-zip maintainer-clean-zip +maybe-maintainer-clean-zip: -distclean-patch: - @[ -f ./patch/Makefile ] || exit 0; \ +maintainer-clean-zip: + @[ -f ./zip/Makefile ] || exit 0; \ r=`${PWD_COMMAND}`; export r; \ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ $(SET_LIB_PATH) \ for flag in $(EXTRA_HOST_FLAGS); do \ eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \ done; \ - echo "Doing distclean in patch" ; \ - (cd patch && \ + echo "Doing maintainer-clean in zip" ; \ + (cd zip && \ $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \ "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \ "RANLIB=$${RANLIB}" \ "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" \ - distclean) \ + maintainer-clean) \ || exit 1 -.PHONY: maybe-distclean-perl distclean-perl -maybe-distclean-perl: -distclean-perl: - @[ -f ./perl/Makefile ] || exit 0; \ +.PHONY: configure-zlib maybe-configure-zlib +maybe-configure-zlib: +configure-zlib: + @test ! -f zlib/Makefile || exit 0; \ + [ -d zlib ] || mkdir zlib; \ r=`${PWD_COMMAND}`; export r; \ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ - $(SET_LIB_PATH) \ - for flag in $(EXTRA_HOST_FLAGS); do \ - eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \ - done; \ - echo "Doing distclean in perl" ; \ - (cd perl && \ - $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \ - "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \ - "RANLIB=$${RANLIB}" \ - "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" \ - distclean) \ + CC="$(CC)"; export CC; \ + CFLAGS="$(CFLAGS)"; export CFLAGS; \ + CONFIG_SHELL="$(SHELL)"; export CONFIG_SHELL; \ + CXX="$(CXX)"; export CXX; \ + CXXFLAGS="$(CXXFLAGS)"; export CXXFLAGS; \ + AR="$(AR)"; export AR; \ + AS="$(AS)"; export AS; \ + CC_FOR_BUILD="$(CC_FOR_BUILD)"; export CC_FOR_BUILD; \ + DLLTOOL="$(DLLTOOL)"; export DLLTOOL; \ + LD="$(LD)"; export LD; \ + NM="$(NM)"; export NM; \ + RANLIB="$(RANLIB)"; export RANLIB; \ + WINDRES="$(WINDRES)"; export WINDRES; \ + OBJCOPY="$(OBJCOPY)"; export OBJCOPY; \ + OBJDUMP="$(OBJDUMP)"; export OBJDUMP; \ + echo Configuring in zlib; \ + cd zlib || exit 1; \ + case $(srcdir) in \ + \.) \ + srcdiroption="--srcdir=."; \ + libsrcdir=".";; \ + /* | [A-Za-z]:[\\/]*) \ + srcdiroption="--srcdir=$(srcdir)/zlib"; \ + libsrcdir="$$s/zlib";; \ + *) \ + srcdiroption="--srcdir=../$(srcdir)/zlib"; \ + libsrcdir="$$s/zlib";; \ + esac; \ + $(SHELL) $${libsrcdir}/configure \ + $(HOST_CONFIGARGS) $${srcdiroption} \ || exit 1 +.PHONY: all-zlib maybe-all-zlib +maybe-all-zlib: +all-zlib: configure-zlib + @r=`${PWD_COMMAND}`; export r; \ + s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ + $(SET_LIB_PATH) \ + (cd zlib && $(MAKE) $(FLAGS_TO_PASS) all) -.PHONY: maybe-distclean-prms distclean-prms -maybe-distclean-prms: +.PHONY: check-zlib maybe-check-zlib +maybe-check-zlib: -distclean-prms: - @[ -f ./prms/Makefile ] || exit 0; \ +check-zlib: + + +.PHONY: install-zlib maybe-install-zlib +maybe-install-zlib: + +install-zlib: + + +# Other targets (info, dvi, etc.) + +.PHONY: maybe-info-zlib info-zlib +maybe-info-zlib: + +info-zlib: \ + configure-zlib + @[ -f ./zlib/Makefile ] || exit 0; \ r=`${PWD_COMMAND}`; export r; \ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ $(SET_LIB_PATH) \ for flag in $(EXTRA_HOST_FLAGS); do \ eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \ done; \ - echo "Doing distclean in prms" ; \ - (cd prms && \ + echo "Doing info in zlib" ; \ + (cd zlib && \ $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \ "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \ "RANLIB=$${RANLIB}" \ "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" \ - distclean) \ + info) \ || exit 1 -.PHONY: maybe-distclean-rcs distclean-rcs -maybe-distclean-rcs: +.PHONY: maybe-dvi-zlib dvi-zlib +maybe-dvi-zlib: -distclean-rcs: - @[ -f ./rcs/Makefile ] || exit 0; \ +dvi-zlib: \ + configure-zlib + @[ -f ./zlib/Makefile ] || exit 0; \ r=`${PWD_COMMAND}`; export r; \ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ $(SET_LIB_PATH) \ for flag in $(EXTRA_HOST_FLAGS); do \ eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \ done; \ - echo "Doing distclean in rcs" ; \ - (cd rcs && \ + echo "Doing dvi in zlib" ; \ + (cd zlib && \ $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \ "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \ "RANLIB=$${RANLIB}" \ "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" \ - distclean) \ + dvi) \ || exit 1 -.PHONY: maybe-distclean-readline distclean-readline -maybe-distclean-readline: +.PHONY: maybe-TAGS-zlib TAGS-zlib +maybe-TAGS-zlib: -distclean-readline: - @[ -f ./readline/Makefile ] || exit 0; \ +TAGS-zlib: \ + configure-zlib + @[ -f ./zlib/Makefile ] || exit 0; \ r=`${PWD_COMMAND}`; export r; \ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ $(SET_LIB_PATH) \ for flag in $(EXTRA_HOST_FLAGS); do \ eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \ done; \ - echo "Doing distclean in readline" ; \ - (cd readline && \ + echo "Doing TAGS in zlib" ; \ + (cd zlib && \ $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \ "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \ "RANLIB=$${RANLIB}" \ "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" \ - distclean) \ + TAGS) \ || exit 1 -.PHONY: maybe-distclean-release distclean-release -maybe-distclean-release: +.PHONY: maybe-install-info-zlib install-info-zlib +maybe-install-info-zlib: -distclean-release: - @[ -f ./release/Makefile ] || exit 0; \ +install-info-zlib: \ + configure-zlib \ + info-zlib + @[ -f ./zlib/Makefile ] || exit 0; \ r=`${PWD_COMMAND}`; export r; \ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ $(SET_LIB_PATH) \ for flag in $(EXTRA_HOST_FLAGS); do \ eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \ done; \ - echo "Doing distclean in release" ; \ - (cd release && \ + echo "Doing install-info in zlib" ; \ + (cd zlib && \ $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \ "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \ "RANLIB=$${RANLIB}" \ "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" \ - distclean) \ + install-info) \ || exit 1 -.PHONY: maybe-distclean-recode distclean-recode -maybe-distclean-recode: +.PHONY: maybe-installcheck-zlib installcheck-zlib +maybe-installcheck-zlib: -distclean-recode: - @[ -f ./recode/Makefile ] || exit 0; \ +installcheck-zlib: \ + configure-zlib + @[ -f ./zlib/Makefile ] || exit 0; \ r=`${PWD_COMMAND}`; export r; \ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ $(SET_LIB_PATH) \ for flag in $(EXTRA_HOST_FLAGS); do \ eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \ done; \ - echo "Doing distclean in recode" ; \ - (cd recode && \ + echo "Doing installcheck in zlib" ; \ + (cd zlib && \ $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \ "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \ "RANLIB=$${RANLIB}" \ "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" \ - distclean) \ + installcheck) \ || exit 1 -.PHONY: maybe-distclean-sed distclean-sed -maybe-distclean-sed: +.PHONY: maybe-mostlyclean-zlib mostlyclean-zlib +maybe-mostlyclean-zlib: -distclean-sed: - @[ -f ./sed/Makefile ] || exit 0; \ +mostlyclean-zlib: + @[ -f ./zlib/Makefile ] || exit 0; \ r=`${PWD_COMMAND}`; export r; \ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ $(SET_LIB_PATH) \ for flag in $(EXTRA_HOST_FLAGS); do \ eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \ done; \ - echo "Doing distclean in sed" ; \ - (cd sed && \ + echo "Doing mostlyclean in zlib" ; \ + (cd zlib && \ $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \ "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \ "RANLIB=$${RANLIB}" \ "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" \ - distclean) \ + mostlyclean) \ || exit 1 -.PHONY: maybe-distclean-send-pr distclean-send-pr -maybe-distclean-send-pr: +.PHONY: maybe-clean-zlib clean-zlib +maybe-clean-zlib: -distclean-send-pr: - @[ -f ./send-pr/Makefile ] || exit 0; \ +clean-zlib: + @[ -f ./zlib/Makefile ] || exit 0; \ r=`${PWD_COMMAND}`; export r; \ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ $(SET_LIB_PATH) \ for flag in $(EXTRA_HOST_FLAGS); do \ eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \ done; \ - echo "Doing distclean in send-pr" ; \ - (cd send-pr && \ + echo "Doing clean in zlib" ; \ + (cd zlib && \ $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \ "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \ "RANLIB=$${RANLIB}" \ "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" \ - distclean) \ + clean) \ || exit 1 -.PHONY: maybe-distclean-shellutils distclean-shellutils -maybe-distclean-shellutils: +.PHONY: maybe-distclean-zlib distclean-zlib +maybe-distclean-zlib: -distclean-shellutils: - @[ -f ./shellutils/Makefile ] || exit 0; \ +distclean-zlib: + @[ -f ./zlib/Makefile ] || exit 0; \ r=`${PWD_COMMAND}`; export r; \ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ $(SET_LIB_PATH) \ for flag in $(EXTRA_HOST_FLAGS); do \ eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \ done; \ - echo "Doing distclean in shellutils" ; \ - (cd shellutils && \ + echo "Doing distclean in zlib" ; \ + (cd zlib && \ $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \ "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \ "RANLIB=$${RANLIB}" \ @@ -14948,208 +17026,263 @@ distclean-shellutils: || exit 1 -.PHONY: maybe-distclean-sid distclean-sid -maybe-distclean-sid: +.PHONY: maybe-maintainer-clean-zlib maintainer-clean-zlib +maybe-maintainer-clean-zlib: -distclean-sid: - @[ -f ./sid/Makefile ] || exit 0; \ +maintainer-clean-zlib: + @[ -f ./zlib/Makefile ] || exit 0; \ r=`${PWD_COMMAND}`; export r; \ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ $(SET_LIB_PATH) \ for flag in $(EXTRA_HOST_FLAGS); do \ eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \ done; \ - echo "Doing distclean in sid" ; \ - (cd sid && \ + echo "Doing maintainer-clean in zlib" ; \ + (cd zlib && \ $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \ "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \ "RANLIB=$${RANLIB}" \ "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" \ - distclean) \ + maintainer-clean) \ || exit 1 -.PHONY: maybe-distclean-sim distclean-sim -maybe-distclean-sim: -distclean-sim: - @[ -f ./sim/Makefile ] || exit 0; \ +.PHONY: configure-gdb maybe-configure-gdb +maybe-configure-gdb: +configure-gdb: + @test ! -f gdb/Makefile || exit 0; \ + [ -d gdb ] || mkdir gdb; \ r=`${PWD_COMMAND}`; export r; \ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ - $(SET_LIB_PATH) \ - for flag in $(EXTRA_HOST_FLAGS); do \ - eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \ - done; \ - echo "Doing distclean in sim" ; \ - (cd sim && \ - $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \ - "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \ - "RANLIB=$${RANLIB}" \ - "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" \ - distclean) \ + CC="$(CC)"; export CC; \ + CFLAGS="$(CFLAGS)"; export CFLAGS; \ + CONFIG_SHELL="$(SHELL)"; export CONFIG_SHELL; \ + CXX="$(CXX)"; export CXX; \ + CXXFLAGS="$(CXXFLAGS)"; export CXXFLAGS; \ + AR="$(AR)"; export AR; \ + AS="$(AS)"; export AS; \ + CC_FOR_BUILD="$(CC_FOR_BUILD)"; export CC_FOR_BUILD; \ + DLLTOOL="$(DLLTOOL)"; export DLLTOOL; \ + LD="$(LD)"; export LD; \ + NM="$(NM)"; export NM; \ + RANLIB="$(RANLIB)"; export RANLIB; \ + WINDRES="$(WINDRES)"; export WINDRES; \ + OBJCOPY="$(OBJCOPY)"; export OBJCOPY; \ + OBJDUMP="$(OBJDUMP)"; export OBJDUMP; \ + echo Configuring in gdb; \ + cd gdb || exit 1; \ + case $(srcdir) in \ + \.) \ + srcdiroption="--srcdir=."; \ + libsrcdir=".";; \ + /* | [A-Za-z]:[\\/]*) \ + srcdiroption="--srcdir=$(srcdir)/gdb"; \ + libsrcdir="$$s/gdb";; \ + *) \ + srcdiroption="--srcdir=../$(srcdir)/gdb"; \ + libsrcdir="$$s/gdb";; \ + esac; \ + $(SHELL) $${libsrcdir}/configure \ + $(HOST_CONFIGARGS) $${srcdiroption} \ || exit 1 +.PHONY: all-gdb maybe-all-gdb +maybe-all-gdb: +all-gdb: configure-gdb + @r=`${PWD_COMMAND}`; export r; \ + s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ + $(SET_LIB_PATH) \ + (cd gdb && $(MAKE) $(FLAGS_TO_PASS) $(X11_FLAGS_TO_PASS) all) -.PHONY: maybe-distclean-tar distclean-tar -maybe-distclean-tar: +.PHONY: check-gdb maybe-check-gdb +maybe-check-gdb: -distclean-tar: - @[ -f ./tar/Makefile ] || exit 0; \ +check-gdb: + @r=`${PWD_COMMAND}`; export r; \ + s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ + $(SET_LIB_PATH) \ + (cd gdb && $(MAKE) $(FLAGS_TO_PASS) $(X11_FLAGS_TO_PASS) check) + + +.PHONY: install-gdb maybe-install-gdb +maybe-install-gdb: + +install-gdb: installdirs + @r=`${PWD_COMMAND}`; export r; \ + s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ + $(SET_LIB_PATH) \ + (cd gdb && $(MAKE) $(FLAGS_TO_PASS) $(X11_FLAGS_TO_PASS) install) + + +# Other targets (info, dvi, etc.) + +.PHONY: maybe-info-gdb info-gdb +maybe-info-gdb: + +info-gdb: \ + configure-gdb + @[ -f ./gdb/Makefile ] || exit 0; \ r=`${PWD_COMMAND}`; export r; \ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ $(SET_LIB_PATH) \ for flag in $(EXTRA_HOST_FLAGS); do \ eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \ done; \ - echo "Doing distclean in tar" ; \ - (cd tar && \ + echo "Doing info in gdb" ; \ + (cd gdb && \ $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \ "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \ "RANLIB=$${RANLIB}" \ "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" \ - distclean) \ + info) \ || exit 1 -.PHONY: maybe-distclean-texinfo distclean-texinfo -maybe-distclean-texinfo: +.PHONY: maybe-dvi-gdb dvi-gdb +maybe-dvi-gdb: -distclean-texinfo: - @[ -f ./texinfo/Makefile ] || exit 0; \ +dvi-gdb: \ + configure-gdb + @[ -f ./gdb/Makefile ] || exit 0; \ r=`${PWD_COMMAND}`; export r; \ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ $(SET_LIB_PATH) \ for flag in $(EXTRA_HOST_FLAGS); do \ eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \ done; \ - echo "Doing distclean in texinfo" ; \ - (cd texinfo && \ + echo "Doing dvi in gdb" ; \ + (cd gdb && \ $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \ "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \ "RANLIB=$${RANLIB}" \ "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" \ - distclean) \ + dvi) \ || exit 1 -.PHONY: maybe-distclean-textutils distclean-textutils -maybe-distclean-textutils: +.PHONY: maybe-TAGS-gdb TAGS-gdb +maybe-TAGS-gdb: -distclean-textutils: - @[ -f ./textutils/Makefile ] || exit 0; \ +TAGS-gdb: \ + configure-gdb + @[ -f ./gdb/Makefile ] || exit 0; \ r=`${PWD_COMMAND}`; export r; \ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ $(SET_LIB_PATH) \ for flag in $(EXTRA_HOST_FLAGS); do \ eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \ done; \ - echo "Doing distclean in textutils" ; \ - (cd textutils && \ + echo "Doing TAGS in gdb" ; \ + (cd gdb && \ $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \ "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \ "RANLIB=$${RANLIB}" \ "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" \ - distclean) \ + TAGS) \ || exit 1 -.PHONY: maybe-distclean-time distclean-time -maybe-distclean-time: +.PHONY: maybe-install-info-gdb install-info-gdb +maybe-install-info-gdb: -distclean-time: - @[ -f ./time/Makefile ] || exit 0; \ +install-info-gdb: \ + configure-gdb \ + info-gdb + @[ -f ./gdb/Makefile ] || exit 0; \ r=`${PWD_COMMAND}`; export r; \ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ $(SET_LIB_PATH) \ for flag in $(EXTRA_HOST_FLAGS); do \ eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \ done; \ - echo "Doing distclean in time" ; \ - (cd time && \ + echo "Doing install-info in gdb" ; \ + (cd gdb && \ $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \ "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \ "RANLIB=$${RANLIB}" \ "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" \ - distclean) \ + install-info) \ || exit 1 -.PHONY: maybe-distclean-uudecode distclean-uudecode -maybe-distclean-uudecode: +.PHONY: maybe-installcheck-gdb installcheck-gdb +maybe-installcheck-gdb: -distclean-uudecode: - @[ -f ./uudecode/Makefile ] || exit 0; \ +installcheck-gdb: \ + configure-gdb + @[ -f ./gdb/Makefile ] || exit 0; \ r=`${PWD_COMMAND}`; export r; \ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ $(SET_LIB_PATH) \ for flag in $(EXTRA_HOST_FLAGS); do \ eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \ done; \ - echo "Doing distclean in uudecode" ; \ - (cd uudecode && \ + echo "Doing installcheck in gdb" ; \ + (cd gdb && \ $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \ "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \ "RANLIB=$${RANLIB}" \ "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" \ - distclean) \ + installcheck) \ || exit 1 -.PHONY: maybe-distclean-wdiff distclean-wdiff -maybe-distclean-wdiff: +.PHONY: maybe-mostlyclean-gdb mostlyclean-gdb +maybe-mostlyclean-gdb: -distclean-wdiff: - @[ -f ./wdiff/Makefile ] || exit 0; \ +mostlyclean-gdb: + @[ -f ./gdb/Makefile ] || exit 0; \ r=`${PWD_COMMAND}`; export r; \ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ $(SET_LIB_PATH) \ for flag in $(EXTRA_HOST_FLAGS); do \ eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \ done; \ - echo "Doing distclean in wdiff" ; \ - (cd wdiff && \ + echo "Doing mostlyclean in gdb" ; \ + (cd gdb && \ $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \ "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \ "RANLIB=$${RANLIB}" \ "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" \ - distclean) \ + mostlyclean) \ || exit 1 -.PHONY: maybe-distclean-zip distclean-zip -maybe-distclean-zip: +.PHONY: maybe-clean-gdb clean-gdb +maybe-clean-gdb: -distclean-zip: - @[ -f ./zip/Makefile ] || exit 0; \ +clean-gdb: + @[ -f ./gdb/Makefile ] || exit 0; \ r=`${PWD_COMMAND}`; export r; \ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ $(SET_LIB_PATH) \ for flag in $(EXTRA_HOST_FLAGS); do \ eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \ done; \ - echo "Doing distclean in zip" ; \ - (cd zip && \ + echo "Doing clean in gdb" ; \ + (cd gdb && \ $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \ "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \ "RANLIB=$${RANLIB}" \ "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" \ - distclean) \ + clean) \ || exit 1 -.PHONY: maybe-distclean-zlib distclean-zlib -maybe-distclean-zlib: +.PHONY: maybe-distclean-gdb distclean-gdb +maybe-distclean-gdb: -distclean-zlib: - @[ -f ./zlib/Makefile ] || exit 0; \ +distclean-gdb: + @[ -f ./gdb/Makefile ] || exit 0; \ r=`${PWD_COMMAND}`; export r; \ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ $(SET_LIB_PATH) \ for flag in $(EXTRA_HOST_FLAGS); do \ eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \ done; \ - echo "Doing distclean in zlib" ; \ - (cd zlib && \ + echo "Doing distclean in gdb" ; \ + (cd gdb && \ $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \ "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \ "RANLIB=$${RANLIB}" \ @@ -15158,10 +17291,10 @@ distclean-zlib: || exit 1 -.PHONY: maybe-distclean-gdb distclean-gdb -maybe-distclean-gdb: +.PHONY: maybe-maintainer-clean-gdb maintainer-clean-gdb +maybe-maintainer-clean-gdb: -distclean-gdb: +maintainer-clean-gdb: @[ -f ./gdb/Makefile ] || exit 0; \ r=`${PWD_COMMAND}`; export r; \ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ @@ -15169,20 +17302,91 @@ distclean-gdb: for flag in $(EXTRA_HOST_FLAGS); do \ eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \ done; \ - echo "Doing distclean in gdb" ; \ + echo "Doing maintainer-clean in gdb" ; \ (cd gdb && \ $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \ "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \ "RANLIB=$${RANLIB}" \ "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" \ - distclean) \ + maintainer-clean) \ || exit 1 -.PHONY: maybe-distclean-expect distclean-expect -maybe-distclean-expect: -distclean-expect: +.PHONY: configure-expect maybe-configure-expect +maybe-configure-expect: +configure-expect: + @test ! -f expect/Makefile || exit 0; \ + [ -d expect ] || mkdir expect; \ + r=`${PWD_COMMAND}`; export r; \ + s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ + CC="$(CC)"; export CC; \ + CFLAGS="$(CFLAGS)"; export CFLAGS; \ + CONFIG_SHELL="$(SHELL)"; export CONFIG_SHELL; \ + CXX="$(CXX)"; export CXX; \ + CXXFLAGS="$(CXXFLAGS)"; export CXXFLAGS; \ + AR="$(AR)"; export AR; \ + AS="$(AS)"; export AS; \ + CC_FOR_BUILD="$(CC_FOR_BUILD)"; export CC_FOR_BUILD; \ + DLLTOOL="$(DLLTOOL)"; export DLLTOOL; \ + LD="$(LD)"; export LD; \ + NM="$(NM)"; export NM; \ + RANLIB="$(RANLIB)"; export RANLIB; \ + WINDRES="$(WINDRES)"; export WINDRES; \ + OBJCOPY="$(OBJCOPY)"; export OBJCOPY; \ + OBJDUMP="$(OBJDUMP)"; export OBJDUMP; \ + echo Configuring in expect; \ + cd expect || exit 1; \ + case $(srcdir) in \ + \.) \ + srcdiroption="--srcdir=."; \ + libsrcdir=".";; \ + /* | [A-Za-z]:[\\/]*) \ + srcdiroption="--srcdir=$(srcdir)/expect"; \ + libsrcdir="$$s/expect";; \ + *) \ + srcdiroption="--srcdir=../$(srcdir)/expect"; \ + libsrcdir="$$s/expect";; \ + esac; \ + $(SHELL) $${libsrcdir}/configure \ + $(HOST_CONFIGARGS) $${srcdiroption} \ + || exit 1 + +.PHONY: all-expect maybe-all-expect +maybe-all-expect: +all-expect: configure-expect + @r=`${PWD_COMMAND}`; export r; \ + s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ + $(SET_LIB_PATH) \ + (cd expect && $(MAKE) $(FLAGS_TO_PASS) $(X11_FLAGS_TO_PASS) all) + +.PHONY: check-expect maybe-check-expect +maybe-check-expect: + +check-expect: + @r=`${PWD_COMMAND}`; export r; \ + s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ + $(SET_LIB_PATH) \ + (cd expect && $(MAKE) $(FLAGS_TO_PASS) $(X11_FLAGS_TO_PASS) check) + + +.PHONY: install-expect maybe-install-expect +maybe-install-expect: + +install-expect: installdirs + @r=`${PWD_COMMAND}`; export r; \ + s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ + $(SET_LIB_PATH) \ + (cd expect && $(MAKE) $(FLAGS_TO_PASS) $(X11_FLAGS_TO_PASS) install) + + +# Other targets (info, dvi, etc.) + +.PHONY: maybe-info-expect info-expect +maybe-info-expect: + +info-expect: \ + configure-expect @[ -f ./expect/Makefile ] || exit 0; \ r=`${PWD_COMMAND}`; export r; \ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ @@ -15190,165 +17394,160 @@ distclean-expect: for flag in $(EXTRA_HOST_FLAGS); do \ eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \ done; \ - echo "Doing distclean in expect" ; \ + echo "Doing info in expect" ; \ (cd expect && \ $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \ "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \ "RANLIB=$${RANLIB}" \ "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" \ - distclean) \ + info) \ || exit 1 -.PHONY: maybe-distclean-guile distclean-guile -maybe-distclean-guile: +.PHONY: maybe-dvi-expect dvi-expect +maybe-dvi-expect: -distclean-guile: - @[ -f ./guile/Makefile ] || exit 0; \ +dvi-expect: \ + configure-expect + @[ -f ./expect/Makefile ] || exit 0; \ r=`${PWD_COMMAND}`; export r; \ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ $(SET_LIB_PATH) \ for flag in $(EXTRA_HOST_FLAGS); do \ eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \ done; \ - echo "Doing distclean in guile" ; \ - (cd guile && \ + echo "Doing dvi in expect" ; \ + (cd expect && \ $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \ "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \ "RANLIB=$${RANLIB}" \ "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" \ - distclean) \ + dvi) \ || exit 1 -.PHONY: maybe-distclean-tk distclean-tk -maybe-distclean-tk: +.PHONY: maybe-TAGS-expect TAGS-expect +maybe-TAGS-expect: -distclean-tk: - @[ -f ./tk/Makefile ] || exit 0; \ +TAGS-expect: \ + configure-expect + @[ -f ./expect/Makefile ] || exit 0; \ r=`${PWD_COMMAND}`; export r; \ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ $(SET_LIB_PATH) \ for flag in $(EXTRA_HOST_FLAGS); do \ eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \ done; \ - echo "Doing distclean in tk" ; \ - (cd tk && \ + echo "Doing TAGS in expect" ; \ + (cd expect && \ $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \ "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \ "RANLIB=$${RANLIB}" \ "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" \ - distclean) \ + TAGS) \ || exit 1 -.PHONY: maybe-distclean-tix distclean-tix -maybe-distclean-tix: +.PHONY: maybe-install-info-expect install-info-expect +maybe-install-info-expect: -distclean-tix: - @[ -f ./tix/Makefile ] || exit 0; \ +install-info-expect: \ + configure-expect \ + info-expect + @[ -f ./expect/Makefile ] || exit 0; \ r=`${PWD_COMMAND}`; export r; \ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ $(SET_LIB_PATH) \ for flag in $(EXTRA_HOST_FLAGS); do \ eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \ done; \ - echo "Doing distclean in tix" ; \ - (cd tix && \ + echo "Doing install-info in expect" ; \ + (cd expect && \ $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \ "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \ "RANLIB=$${RANLIB}" \ "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" \ - distclean) \ + install-info) \ || exit 1 -.PHONY: maybe-distclean-libtermcap distclean-libtermcap -maybe-distclean-libtermcap: - -# libtermcap doesn't support distclean. -distclean-libtermcap: - - -.PHONY: maybe-distclean-utils distclean-utils -maybe-distclean-utils: +.PHONY: maybe-installcheck-expect installcheck-expect +maybe-installcheck-expect: -distclean-utils: - @[ -f ./utils/Makefile ] || exit 0; \ +installcheck-expect: \ + configure-expect + @[ -f ./expect/Makefile ] || exit 0; \ r=`${PWD_COMMAND}`; export r; \ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ $(SET_LIB_PATH) \ for flag in $(EXTRA_HOST_FLAGS); do \ eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \ done; \ - echo "Doing distclean in utils" ; \ - (cd utils && \ + echo "Doing installcheck in expect" ; \ + (cd expect && \ $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \ "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \ "RANLIB=$${RANLIB}" \ "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" \ - distclean) \ + installcheck) \ || exit 1 +.PHONY: maybe-mostlyclean-expect mostlyclean-expect +maybe-mostlyclean-expect: -# Target modules. - -.PHONY: maybe-distclean-target-libstdc++-v3 distclean-target-libstdc++-v3 -maybe-distclean-target-libstdc++-v3: - -distclean-target-libstdc++-v3: - @[ -f $(TARGET_SUBDIR)/libstdc++-v3/Makefile ] || exit 0 ; \ +mostlyclean-expect: + @[ -f ./expect/Makefile ] || exit 0; \ r=`${PWD_COMMAND}`; export r; \ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ $(SET_LIB_PATH) \ - echo "Doing distclean in $(TARGET_SUBDIR)/libstdc++-v3" ; \ - for flag in $(EXTRA_TARGET_FLAGS); do \ + for flag in $(EXTRA_HOST_FLAGS); do \ eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \ done; \ - (cd $(TARGET_SUBDIR)/libstdc++-v3 && \ + echo "Doing mostlyclean in expect" ; \ + (cd expect && \ $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \ "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \ "RANLIB=$${RANLIB}" \ "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" \ - distclean) \ + mostlyclean) \ || exit 1 -.PHONY: maybe-distclean-target-newlib distclean-target-newlib -maybe-distclean-target-newlib: +.PHONY: maybe-clean-expect clean-expect +maybe-clean-expect: -distclean-target-newlib: - @[ -f $(TARGET_SUBDIR)/newlib/Makefile ] || exit 0 ; \ +clean-expect: + @[ -f ./expect/Makefile ] || exit 0; \ r=`${PWD_COMMAND}`; export r; \ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ $(SET_LIB_PATH) \ - echo "Doing distclean in $(TARGET_SUBDIR)/newlib" ; \ - for flag in $(EXTRA_TARGET_FLAGS); do \ + for flag in $(EXTRA_HOST_FLAGS); do \ eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \ done; \ - (cd $(TARGET_SUBDIR)/newlib && \ + echo "Doing clean in expect" ; \ + (cd expect && \ $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \ "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \ "RANLIB=$${RANLIB}" \ "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" \ - distclean) \ + clean) \ || exit 1 -.PHONY: maybe-distclean-target-libf2c distclean-target-libf2c -maybe-distclean-target-libf2c: +.PHONY: maybe-distclean-expect distclean-expect +maybe-distclean-expect: -distclean-target-libf2c: - @[ -f $(TARGET_SUBDIR)/libf2c/Makefile ] || exit 0 ; \ +distclean-expect: + @[ -f ./expect/Makefile ] || exit 0; \ r=`${PWD_COMMAND}`; export r; \ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ $(SET_LIB_PATH) \ - echo "Doing distclean in $(TARGET_SUBDIR)/libf2c" ; \ - for flag in $(EXTRA_TARGET_FLAGS); do \ + for flag in $(EXTRA_HOST_FLAGS); do \ eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \ done; \ - (cd $(TARGET_SUBDIR)/libf2c && \ + echo "Doing distclean in expect" ; \ + (cd expect && \ $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \ "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \ "RANLIB=$${RANLIB}" \ @@ -15357,236 +17556,263 @@ distclean-target-libf2c: || exit 1 -.PHONY: maybe-distclean-target-libobjc distclean-target-libobjc -maybe-distclean-target-libobjc: +.PHONY: maybe-maintainer-clean-expect maintainer-clean-expect +maybe-maintainer-clean-expect: -distclean-target-libobjc: - @[ -f $(TARGET_SUBDIR)/libobjc/Makefile ] || exit 0 ; \ +maintainer-clean-expect: + @[ -f ./expect/Makefile ] || exit 0; \ r=`${PWD_COMMAND}`; export r; \ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ $(SET_LIB_PATH) \ - echo "Doing distclean in $(TARGET_SUBDIR)/libobjc" ; \ - for flag in $(EXTRA_TARGET_FLAGS); do \ + for flag in $(EXTRA_HOST_FLAGS); do \ eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \ done; \ - (cd $(TARGET_SUBDIR)/libobjc && \ + echo "Doing maintainer-clean in expect" ; \ + (cd expect && \ $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \ "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \ "RANLIB=$${RANLIB}" \ "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" \ - distclean) \ + maintainer-clean) \ || exit 1 -.PHONY: maybe-distclean-target-libtermcap distclean-target-libtermcap -maybe-distclean-target-libtermcap: -# libtermcap doesn't support distclean. -distclean-target-libtermcap: +.PHONY: configure-guile maybe-configure-guile +maybe-configure-guile: +configure-guile: + @test ! -f guile/Makefile || exit 0; \ + [ -d guile ] || mkdir guile; \ + r=`${PWD_COMMAND}`; export r; \ + s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ + CC="$(CC)"; export CC; \ + CFLAGS="$(CFLAGS)"; export CFLAGS; \ + CONFIG_SHELL="$(SHELL)"; export CONFIG_SHELL; \ + CXX="$(CXX)"; export CXX; \ + CXXFLAGS="$(CXXFLAGS)"; export CXXFLAGS; \ + AR="$(AR)"; export AR; \ + AS="$(AS)"; export AS; \ + CC_FOR_BUILD="$(CC_FOR_BUILD)"; export CC_FOR_BUILD; \ + DLLTOOL="$(DLLTOOL)"; export DLLTOOL; \ + LD="$(LD)"; export LD; \ + NM="$(NM)"; export NM; \ + RANLIB="$(RANLIB)"; export RANLIB; \ + WINDRES="$(WINDRES)"; export WINDRES; \ + OBJCOPY="$(OBJCOPY)"; export OBJCOPY; \ + OBJDUMP="$(OBJDUMP)"; export OBJDUMP; \ + echo Configuring in guile; \ + cd guile || exit 1; \ + case $(srcdir) in \ + \.) \ + srcdiroption="--srcdir=."; \ + libsrcdir=".";; \ + /* | [A-Za-z]:[\\/]*) \ + srcdiroption="--srcdir=$(srcdir)/guile"; \ + libsrcdir="$$s/guile";; \ + *) \ + srcdiroption="--srcdir=../$(srcdir)/guile"; \ + libsrcdir="$$s/guile";; \ + esac; \ + $(SHELL) $${libsrcdir}/configure \ + $(HOST_CONFIGARGS) $${srcdiroption} \ + || exit 1 +.PHONY: all-guile maybe-all-guile +maybe-all-guile: +all-guile: configure-guile + @r=`${PWD_COMMAND}`; export r; \ + s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ + $(SET_LIB_PATH) \ + (cd guile && $(MAKE) $(FLAGS_TO_PASS) $(X11_FLAGS_TO_PASS) all) -.PHONY: maybe-distclean-target-winsup distclean-target-winsup -maybe-distclean-target-winsup: +.PHONY: check-guile maybe-check-guile +maybe-check-guile: -distclean-target-winsup: - @[ -f $(TARGET_SUBDIR)/winsup/Makefile ] || exit 0 ; \ - r=`${PWD_COMMAND}`; export r; \ +check-guile: + @r=`${PWD_COMMAND}`; export r; \ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ $(SET_LIB_PATH) \ - echo "Doing distclean in $(TARGET_SUBDIR)/winsup" ; \ - for flag in $(EXTRA_TARGET_FLAGS); do \ - eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \ - done; \ - (cd $(TARGET_SUBDIR)/winsup && \ - $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \ - "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \ - "RANLIB=$${RANLIB}" \ - "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" \ - distclean) \ - || exit 1 + (cd guile && $(MAKE) $(FLAGS_TO_PASS) $(X11_FLAGS_TO_PASS) check) -.PHONY: maybe-distclean-target-libgloss distclean-target-libgloss -maybe-distclean-target-libgloss: +.PHONY: install-guile maybe-install-guile +maybe-install-guile: -distclean-target-libgloss: - @[ -f $(TARGET_SUBDIR)/libgloss/Makefile ] || exit 0 ; \ - r=`${PWD_COMMAND}`; export r; \ +install-guile: installdirs + @r=`${PWD_COMMAND}`; export r; \ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ $(SET_LIB_PATH) \ - echo "Doing distclean in $(TARGET_SUBDIR)/libgloss" ; \ - for flag in $(EXTRA_TARGET_FLAGS); do \ - eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \ - done; \ - (cd $(TARGET_SUBDIR)/libgloss && \ - $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \ - "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \ - "RANLIB=$${RANLIB}" \ - "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" \ - distclean) \ - || exit 1 + (cd guile && $(MAKE) $(FLAGS_TO_PASS) $(X11_FLAGS_TO_PASS) install) -.PHONY: maybe-distclean-target-libiberty distclean-target-libiberty -maybe-distclean-target-libiberty: +# Other targets (info, dvi, etc.) -distclean-target-libiberty: - @[ -f $(TARGET_SUBDIR)/libiberty/Makefile ] || exit 0 ; \ +.PHONY: maybe-info-guile info-guile +maybe-info-guile: + +info-guile: \ + configure-guile + @[ -f ./guile/Makefile ] || exit 0; \ r=`${PWD_COMMAND}`; export r; \ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ $(SET_LIB_PATH) \ - echo "Doing distclean in $(TARGET_SUBDIR)/libiberty" ; \ - for flag in $(EXTRA_TARGET_FLAGS); do \ + for flag in $(EXTRA_HOST_FLAGS); do \ eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \ done; \ - (cd $(TARGET_SUBDIR)/libiberty && \ + echo "Doing info in guile" ; \ + (cd guile && \ $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \ "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \ "RANLIB=$${RANLIB}" \ "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" \ - distclean) \ + info) \ || exit 1 -.PHONY: maybe-distclean-target-gperf distclean-target-gperf -maybe-distclean-target-gperf: +.PHONY: maybe-dvi-guile dvi-guile +maybe-dvi-guile: -distclean-target-gperf: - @[ -f $(TARGET_SUBDIR)/gperf/Makefile ] || exit 0 ; \ +dvi-guile: \ + configure-guile + @[ -f ./guile/Makefile ] || exit 0; \ r=`${PWD_COMMAND}`; export r; \ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ $(SET_LIB_PATH) \ - echo "Doing distclean in $(TARGET_SUBDIR)/gperf" ; \ - for flag in $(EXTRA_TARGET_FLAGS); do \ + for flag in $(EXTRA_HOST_FLAGS); do \ eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \ done; \ - (cd $(TARGET_SUBDIR)/gperf && \ + echo "Doing dvi in guile" ; \ + (cd guile && \ $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \ "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \ "RANLIB=$${RANLIB}" \ "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" \ - distclean) \ + dvi) \ || exit 1 -.PHONY: maybe-distclean-target-examples distclean-target-examples -maybe-distclean-target-examples: +.PHONY: maybe-TAGS-guile TAGS-guile +maybe-TAGS-guile: -distclean-target-examples: - @[ -f $(TARGET_SUBDIR)/examples/Makefile ] || exit 0 ; \ +TAGS-guile: \ + configure-guile + @[ -f ./guile/Makefile ] || exit 0; \ r=`${PWD_COMMAND}`; export r; \ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ $(SET_LIB_PATH) \ - echo "Doing distclean in $(TARGET_SUBDIR)/examples" ; \ - for flag in $(EXTRA_TARGET_FLAGS); do \ + for flag in $(EXTRA_HOST_FLAGS); do \ eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \ done; \ - (cd $(TARGET_SUBDIR)/examples && \ + echo "Doing TAGS in guile" ; \ + (cd guile && \ $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \ "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \ "RANLIB=$${RANLIB}" \ "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" \ - distclean) \ + TAGS) \ || exit 1 -.PHONY: maybe-distclean-target-libffi distclean-target-libffi -maybe-distclean-target-libffi: +.PHONY: maybe-install-info-guile install-info-guile +maybe-install-info-guile: -distclean-target-libffi: - @[ -f $(TARGET_SUBDIR)/libffi/Makefile ] || exit 0 ; \ +install-info-guile: \ + configure-guile \ + info-guile + @[ -f ./guile/Makefile ] || exit 0; \ r=`${PWD_COMMAND}`; export r; \ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ $(SET_LIB_PATH) \ - echo "Doing distclean in $(TARGET_SUBDIR)/libffi" ; \ - for flag in $(EXTRA_TARGET_FLAGS); do \ + for flag in $(EXTRA_HOST_FLAGS); do \ eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \ done; \ - (cd $(TARGET_SUBDIR)/libffi && \ + echo "Doing install-info in guile" ; \ + (cd guile && \ $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \ "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \ "RANLIB=$${RANLIB}" \ "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" \ - distclean) \ + install-info) \ || exit 1 -.PHONY: maybe-distclean-target-libjava distclean-target-libjava -maybe-distclean-target-libjava: +.PHONY: maybe-installcheck-guile installcheck-guile +maybe-installcheck-guile: -distclean-target-libjava: - @[ -f $(TARGET_SUBDIR)/libjava/Makefile ] || exit 0 ; \ +installcheck-guile: \ + configure-guile + @[ -f ./guile/Makefile ] || exit 0; \ r=`${PWD_COMMAND}`; export r; \ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ $(SET_LIB_PATH) \ - echo "Doing distclean in $(TARGET_SUBDIR)/libjava" ; \ - for flag in $(EXTRA_TARGET_FLAGS); do \ + for flag in $(EXTRA_HOST_FLAGS); do \ eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \ done; \ - (cd $(TARGET_SUBDIR)/libjava && \ + echo "Doing installcheck in guile" ; \ + (cd guile && \ $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \ "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \ "RANLIB=$${RANLIB}" \ "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" \ - distclean) \ + installcheck) \ || exit 1 -.PHONY: maybe-distclean-target-zlib distclean-target-zlib -maybe-distclean-target-zlib: +.PHONY: maybe-mostlyclean-guile mostlyclean-guile +maybe-mostlyclean-guile: -distclean-target-zlib: - @[ -f $(TARGET_SUBDIR)/zlib/Makefile ] || exit 0 ; \ +mostlyclean-guile: + @[ -f ./guile/Makefile ] || exit 0; \ r=`${PWD_COMMAND}`; export r; \ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ $(SET_LIB_PATH) \ - echo "Doing distclean in $(TARGET_SUBDIR)/zlib" ; \ - for flag in $(EXTRA_TARGET_FLAGS); do \ + for flag in $(EXTRA_HOST_FLAGS); do \ eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \ done; \ - (cd $(TARGET_SUBDIR)/zlib && \ + echo "Doing mostlyclean in guile" ; \ + (cd guile && \ $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \ "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \ "RANLIB=$${RANLIB}" \ "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" \ - distclean) \ + mostlyclean) \ || exit 1 -.PHONY: maybe-distclean-target-boehm-gc distclean-target-boehm-gc -maybe-distclean-target-boehm-gc: +.PHONY: maybe-clean-guile clean-guile +maybe-clean-guile: -distclean-target-boehm-gc: - @[ -f $(TARGET_SUBDIR)/boehm-gc/Makefile ] || exit 0 ; \ +clean-guile: + @[ -f ./guile/Makefile ] || exit 0; \ r=`${PWD_COMMAND}`; export r; \ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ $(SET_LIB_PATH) \ - echo "Doing distclean in $(TARGET_SUBDIR)/boehm-gc" ; \ - for flag in $(EXTRA_TARGET_FLAGS); do \ + for flag in $(EXTRA_HOST_FLAGS); do \ eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \ done; \ - (cd $(TARGET_SUBDIR)/boehm-gc && \ + echo "Doing clean in guile" ; \ + (cd guile && \ $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \ "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \ "RANLIB=$${RANLIB}" \ "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" \ - distclean) \ + clean) \ || exit 1 -.PHONY: maybe-distclean-target-qthreads distclean-target-qthreads -maybe-distclean-target-qthreads: +.PHONY: maybe-distclean-guile distclean-guile +maybe-distclean-guile: -distclean-target-qthreads: - @[ -f $(TARGET_SUBDIR)/qthreads/Makefile ] || exit 0 ; \ +distclean-guile: + @[ -f ./guile/Makefile ] || exit 0; \ r=`${PWD_COMMAND}`; export r; \ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ $(SET_LIB_PATH) \ - echo "Doing distclean in $(TARGET_SUBDIR)/qthreads" ; \ - for flag in $(EXTRA_TARGET_FLAGS); do \ + for flag in $(EXTRA_HOST_FLAGS); do \ eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \ done; \ - (cd $(TARGET_SUBDIR)/qthreads && \ + echo "Doing distclean in guile" ; \ + (cd guile && \ $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \ "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \ "RANLIB=$${RANLIB}" \ @@ -15595,342 +17821,284 @@ distclean-target-qthreads: || exit 1 -.PHONY: maybe-distclean-target-rda distclean-target-rda -maybe-distclean-target-rda: +.PHONY: maybe-maintainer-clean-guile maintainer-clean-guile +maybe-maintainer-clean-guile: -distclean-target-rda: - @[ -f $(TARGET_SUBDIR)/rda/Makefile ] || exit 0 ; \ +maintainer-clean-guile: + @[ -f ./guile/Makefile ] || exit 0; \ r=`${PWD_COMMAND}`; export r; \ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ $(SET_LIB_PATH) \ - echo "Doing distclean in $(TARGET_SUBDIR)/rda" ; \ - for flag in $(EXTRA_TARGET_FLAGS); do \ + for flag in $(EXTRA_HOST_FLAGS); do \ eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \ done; \ - (cd $(TARGET_SUBDIR)/rda && \ + echo "Doing maintainer-clean in guile" ; \ + (cd guile && \ $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \ "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \ "RANLIB=$${RANLIB}" \ "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" \ - distclean) \ + maintainer-clean) \ || exit 1 -.PHONY: maybe-distclean-target-libada distclean-target-libada -maybe-distclean-target-libada: -distclean-target-libada: - @[ -f $(TARGET_SUBDIR)/libada/Makefile ] || exit 0 ; \ +.PHONY: configure-tk maybe-configure-tk +maybe-configure-tk: +configure-tk: + @test ! -f tk/Makefile || exit 0; \ + [ -d tk ] || mkdir tk; \ r=`${PWD_COMMAND}`; export r; \ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ - $(SET_LIB_PATH) \ - echo "Doing distclean in $(TARGET_SUBDIR)/libada" ; \ - for flag in $(EXTRA_TARGET_FLAGS); do \ - eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \ - done; \ - (cd $(TARGET_SUBDIR)/libada && \ - $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \ - "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \ - "RANLIB=$${RANLIB}" \ - "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" \ - distclean) \ + CC="$(CC)"; export CC; \ + CFLAGS="$(CFLAGS)"; export CFLAGS; \ + CONFIG_SHELL="$(SHELL)"; export CONFIG_SHELL; \ + CXX="$(CXX)"; export CXX; \ + CXXFLAGS="$(CXXFLAGS)"; export CXXFLAGS; \ + AR="$(AR)"; export AR; \ + AS="$(AS)"; export AS; \ + CC_FOR_BUILD="$(CC_FOR_BUILD)"; export CC_FOR_BUILD; \ + DLLTOOL="$(DLLTOOL)"; export DLLTOOL; \ + LD="$(LD)"; export LD; \ + NM="$(NM)"; export NM; \ + RANLIB="$(RANLIB)"; export RANLIB; \ + WINDRES="$(WINDRES)"; export WINDRES; \ + OBJCOPY="$(OBJCOPY)"; export OBJCOPY; \ + OBJDUMP="$(OBJDUMP)"; export OBJDUMP; \ + echo Configuring in tk; \ + cd tk || exit 1; \ + case $(srcdir) in \ + \.) \ + srcdiroption="--srcdir=."; \ + libsrcdir=".";; \ + /* | [A-Za-z]:[\\/]*) \ + srcdiroption="--srcdir=$(srcdir)/tk"; \ + libsrcdir="$$s/tk";; \ + *) \ + srcdiroption="--srcdir=../$(srcdir)/tk"; \ + libsrcdir="$$s/tk";; \ + esac; \ + $(SHELL) $${libsrcdir}/configure \ + $(HOST_CONFIGARGS) $${srcdiroption} \ || exit 1 +.PHONY: all-tk maybe-all-tk +maybe-all-tk: +all-tk: configure-tk + @r=`${PWD_COMMAND}`; export r; \ + s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ + $(SET_LIB_PATH) \ + (cd tk && $(MAKE) $(FLAGS_TO_PASS) $(X11_FLAGS_TO_PASS) all) +.PHONY: check-tk maybe-check-tk +maybe-check-tk: -.PHONY: do-maintainer-clean -do-maintainer-clean: maintainer-clean-host maintainer-clean-target +check-tk: + @r=`${PWD_COMMAND}`; export r; \ + s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ + $(SET_LIB_PATH) \ + (cd tk && $(MAKE) $(FLAGS_TO_PASS) $(X11_FLAGS_TO_PASS) check) -.PHONY: maintainer-clean-host -maintainer-clean-host: maybe-maintainer-clean-gcc \ - maybe-maintainer-clean-ash \ - maybe-maintainer-clean-autoconf \ - maybe-maintainer-clean-automake \ - maybe-maintainer-clean-bash \ - maybe-maintainer-clean-bfd \ - maybe-maintainer-clean-opcodes \ - maybe-maintainer-clean-binutils \ - maybe-maintainer-clean-bison \ - maybe-maintainer-clean-byacc \ - maybe-maintainer-clean-bzip2 \ - maybe-maintainer-clean-dejagnu \ - maybe-maintainer-clean-diff \ - maybe-maintainer-clean-dosutils \ - maybe-maintainer-clean-etc \ - maybe-maintainer-clean-fastjar \ - maybe-maintainer-clean-fileutils \ - maybe-maintainer-clean-findutils \ - maybe-maintainer-clean-find \ - maybe-maintainer-clean-flex \ - maybe-maintainer-clean-gas \ - maybe-maintainer-clean-gawk \ - maybe-maintainer-clean-gettext \ - maybe-maintainer-clean-gnuserv \ - maybe-maintainer-clean-gprof \ - maybe-maintainer-clean-gzip \ - maybe-maintainer-clean-hello \ - maybe-maintainer-clean-indent \ - maybe-maintainer-clean-intl \ - maybe-maintainer-clean-tcl \ - maybe-maintainer-clean-itcl \ - maybe-maintainer-clean-ld \ - maybe-maintainer-clean-libgui \ - maybe-maintainer-clean-libiberty \ - maybe-maintainer-clean-libtool \ - maybe-maintainer-clean-m4 \ - maybe-maintainer-clean-make \ - maybe-maintainer-clean-mmalloc \ - maybe-maintainer-clean-patch \ - maybe-maintainer-clean-perl \ - maybe-maintainer-clean-prms \ - maybe-maintainer-clean-rcs \ - maybe-maintainer-clean-readline \ - maybe-maintainer-clean-release \ - maybe-maintainer-clean-recode \ - maybe-maintainer-clean-sed \ - maybe-maintainer-clean-send-pr \ - maybe-maintainer-clean-shellutils \ - maybe-maintainer-clean-sid \ - maybe-maintainer-clean-sim \ - maybe-maintainer-clean-tar \ - maybe-maintainer-clean-texinfo \ - maybe-maintainer-clean-textutils \ - maybe-maintainer-clean-time \ - maybe-maintainer-clean-uudecode \ - maybe-maintainer-clean-wdiff \ - maybe-maintainer-clean-zip \ - maybe-maintainer-clean-zlib \ - maybe-maintainer-clean-gdb \ - maybe-maintainer-clean-expect \ - maybe-maintainer-clean-guile \ - maybe-maintainer-clean-tk \ - maybe-maintainer-clean-tix \ - maybe-maintainer-clean-libtermcap \ - maybe-maintainer-clean-utils -.PHONY: maintainer-clean-target -maintainer-clean-target: \ - maybe-maintainer-clean-target-libstdc++-v3 \ - maybe-maintainer-clean-target-newlib \ - maybe-maintainer-clean-target-libf2c \ - maybe-maintainer-clean-target-libobjc \ - maybe-maintainer-clean-target-libtermcap \ - maybe-maintainer-clean-target-winsup \ - maybe-maintainer-clean-target-libgloss \ - maybe-maintainer-clean-target-libiberty \ - maybe-maintainer-clean-target-gperf \ - maybe-maintainer-clean-target-examples \ - maybe-maintainer-clean-target-libffi \ - maybe-maintainer-clean-target-libjava \ - maybe-maintainer-clean-target-zlib \ - maybe-maintainer-clean-target-boehm-gc \ - maybe-maintainer-clean-target-qthreads \ - maybe-maintainer-clean-target-rda \ - maybe-maintainer-clean-target-libada +.PHONY: install-tk maybe-install-tk +maybe-install-tk: -# GCC, the eternal special case -.PHONY: maybe-maintainer-clean-gcc maintainer-clean-gcc -maybe-maintainer-clean-gcc: -maintainer-clean-gcc: - @[ -f ./gcc/Makefile ] || exit 0; \ - r=`${PWD_COMMAND}`; export r; \ +install-tk: installdirs + @r=`${PWD_COMMAND}`; export r; \ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ $(SET_LIB_PATH) \ - for flag in $(EXTRA_GCC_FLAGS); do \ - eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \ - done; \ - echo "Doing maintainer-clean in gcc" ; \ - (cd gcc && \ - $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \ - "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \ - "RANLIB=$${RANLIB}" \ - "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" \ - maintainer-clean) \ - || exit 1 + (cd tk && $(MAKE) $(FLAGS_TO_PASS) $(X11_FLAGS_TO_PASS) install) -# Host modules. -.PHONY: maybe-maintainer-clean-ash maintainer-clean-ash -maybe-maintainer-clean-ash: +# Other targets (info, dvi, etc.) -maintainer-clean-ash: - @[ -f ./ash/Makefile ] || exit 0; \ +.PHONY: maybe-info-tk info-tk +maybe-info-tk: + +info-tk: \ + configure-tk + @[ -f ./tk/Makefile ] || exit 0; \ r=`${PWD_COMMAND}`; export r; \ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ $(SET_LIB_PATH) \ for flag in $(EXTRA_HOST_FLAGS); do \ eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \ done; \ - echo "Doing maintainer-clean in ash" ; \ - (cd ash && \ + echo "Doing info in tk" ; \ + (cd tk && \ $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \ "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \ "RANLIB=$${RANLIB}" \ "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" \ - maintainer-clean) \ + info) \ || exit 1 -.PHONY: maybe-maintainer-clean-autoconf maintainer-clean-autoconf -maybe-maintainer-clean-autoconf: +.PHONY: maybe-dvi-tk dvi-tk +maybe-dvi-tk: -maintainer-clean-autoconf: - @[ -f ./autoconf/Makefile ] || exit 0; \ +dvi-tk: \ + configure-tk + @[ -f ./tk/Makefile ] || exit 0; \ r=`${PWD_COMMAND}`; export r; \ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ $(SET_LIB_PATH) \ for flag in $(EXTRA_HOST_FLAGS); do \ eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \ done; \ - echo "Doing maintainer-clean in autoconf" ; \ - (cd autoconf && \ + echo "Doing dvi in tk" ; \ + (cd tk && \ $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \ "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \ "RANLIB=$${RANLIB}" \ "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" \ - maintainer-clean) \ + dvi) \ || exit 1 -.PHONY: maybe-maintainer-clean-automake maintainer-clean-automake -maybe-maintainer-clean-automake: +.PHONY: maybe-TAGS-tk TAGS-tk +maybe-TAGS-tk: -maintainer-clean-automake: - @[ -f ./automake/Makefile ] || exit 0; \ +TAGS-tk: \ + configure-tk + @[ -f ./tk/Makefile ] || exit 0; \ r=`${PWD_COMMAND}`; export r; \ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ $(SET_LIB_PATH) \ for flag in $(EXTRA_HOST_FLAGS); do \ eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \ done; \ - echo "Doing maintainer-clean in automake" ; \ - (cd automake && \ + echo "Doing TAGS in tk" ; \ + (cd tk && \ $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \ "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \ "RANLIB=$${RANLIB}" \ "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" \ - maintainer-clean) \ + TAGS) \ || exit 1 -.PHONY: maybe-maintainer-clean-bash maintainer-clean-bash -maybe-maintainer-clean-bash: +.PHONY: maybe-install-info-tk install-info-tk +maybe-install-info-tk: -maintainer-clean-bash: - @[ -f ./bash/Makefile ] || exit 0; \ +install-info-tk: \ + configure-tk \ + info-tk + @[ -f ./tk/Makefile ] || exit 0; \ r=`${PWD_COMMAND}`; export r; \ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ $(SET_LIB_PATH) \ for flag in $(EXTRA_HOST_FLAGS); do \ eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \ done; \ - echo "Doing maintainer-clean in bash" ; \ - (cd bash && \ + echo "Doing install-info in tk" ; \ + (cd tk && \ $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \ "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \ "RANLIB=$${RANLIB}" \ "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" \ - maintainer-clean) \ + install-info) \ || exit 1 -.PHONY: maybe-maintainer-clean-bfd maintainer-clean-bfd -maybe-maintainer-clean-bfd: +.PHONY: maybe-installcheck-tk installcheck-tk +maybe-installcheck-tk: -maintainer-clean-bfd: - @[ -f ./bfd/Makefile ] || exit 0; \ +installcheck-tk: \ + configure-tk + @[ -f ./tk/Makefile ] || exit 0; \ r=`${PWD_COMMAND}`; export r; \ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ $(SET_LIB_PATH) \ for flag in $(EXTRA_HOST_FLAGS); do \ eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \ done; \ - echo "Doing maintainer-clean in bfd" ; \ - (cd bfd && \ + echo "Doing installcheck in tk" ; \ + (cd tk && \ $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \ "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \ "RANLIB=$${RANLIB}" \ "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" \ - maintainer-clean) \ + installcheck) \ || exit 1 -.PHONY: maybe-maintainer-clean-opcodes maintainer-clean-opcodes -maybe-maintainer-clean-opcodes: +.PHONY: maybe-mostlyclean-tk mostlyclean-tk +maybe-mostlyclean-tk: -maintainer-clean-opcodes: - @[ -f ./opcodes/Makefile ] || exit 0; \ +mostlyclean-tk: + @[ -f ./tk/Makefile ] || exit 0; \ r=`${PWD_COMMAND}`; export r; \ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ $(SET_LIB_PATH) \ for flag in $(EXTRA_HOST_FLAGS); do \ eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \ done; \ - echo "Doing maintainer-clean in opcodes" ; \ - (cd opcodes && \ + echo "Doing mostlyclean in tk" ; \ + (cd tk && \ $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \ "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \ "RANLIB=$${RANLIB}" \ "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" \ - maintainer-clean) \ + mostlyclean) \ || exit 1 -.PHONY: maybe-maintainer-clean-binutils maintainer-clean-binutils -maybe-maintainer-clean-binutils: +.PHONY: maybe-clean-tk clean-tk +maybe-clean-tk: -maintainer-clean-binutils: - @[ -f ./binutils/Makefile ] || exit 0; \ +clean-tk: + @[ -f ./tk/Makefile ] || exit 0; \ r=`${PWD_COMMAND}`; export r; \ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ $(SET_LIB_PATH) \ for flag in $(EXTRA_HOST_FLAGS); do \ eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \ done; \ - echo "Doing maintainer-clean in binutils" ; \ - (cd binutils && \ + echo "Doing clean in tk" ; \ + (cd tk && \ $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \ "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \ "RANLIB=$${RANLIB}" \ "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" \ - maintainer-clean) \ + clean) \ || exit 1 -.PHONY: maybe-maintainer-clean-bison maintainer-clean-bison -maybe-maintainer-clean-bison: +.PHONY: maybe-distclean-tk distclean-tk +maybe-distclean-tk: -maintainer-clean-bison: - @[ -f ./bison/Makefile ] || exit 0; \ +distclean-tk: + @[ -f ./tk/Makefile ] || exit 0; \ r=`${PWD_COMMAND}`; export r; \ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ $(SET_LIB_PATH) \ for flag in $(EXTRA_HOST_FLAGS); do \ eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \ done; \ - echo "Doing maintainer-clean in bison" ; \ - (cd bison && \ + echo "Doing distclean in tk" ; \ + (cd tk && \ $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \ "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \ "RANLIB=$${RANLIB}" \ "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" \ - maintainer-clean) \ + distclean) \ || exit 1 -.PHONY: maybe-maintainer-clean-byacc maintainer-clean-byacc -maybe-maintainer-clean-byacc: +.PHONY: maybe-maintainer-clean-tk maintainer-clean-tk +maybe-maintainer-clean-tk: -maintainer-clean-byacc: - @[ -f ./byacc/Makefile ] || exit 0; \ +maintainer-clean-tk: + @[ -f ./tk/Makefile ] || exit 0; \ r=`${PWD_COMMAND}`; export r; \ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ $(SET_LIB_PATH) \ for flag in $(EXTRA_HOST_FLAGS); do \ eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \ done; \ - echo "Doing maintainer-clean in byacc" ; \ - (cd byacc && \ + echo "Doing maintainer-clean in tk" ; \ + (cd tk && \ $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \ "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \ "RANLIB=$${RANLIB}" \ @@ -15939,250 +18107,263 @@ maintainer-clean-byacc: || exit 1 -.PHONY: maybe-maintainer-clean-bzip2 maintainer-clean-bzip2 -maybe-maintainer-clean-bzip2: -maintainer-clean-bzip2: - @[ -f ./bzip2/Makefile ] || exit 0; \ +.PHONY: configure-tix maybe-configure-tix +maybe-configure-tix: +configure-tix: + @test ! -f tix/Makefile || exit 0; \ + [ -d tix ] || mkdir tix; \ r=`${PWD_COMMAND}`; export r; \ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ - $(SET_LIB_PATH) \ - for flag in $(EXTRA_HOST_FLAGS); do \ - eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \ - done; \ - echo "Doing maintainer-clean in bzip2" ; \ - (cd bzip2 && \ - $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \ - "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \ - "RANLIB=$${RANLIB}" \ - "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" \ - maintainer-clean) \ + CC="$(CC)"; export CC; \ + CFLAGS="$(CFLAGS)"; export CFLAGS; \ + CONFIG_SHELL="$(SHELL)"; export CONFIG_SHELL; \ + CXX="$(CXX)"; export CXX; \ + CXXFLAGS="$(CXXFLAGS)"; export CXXFLAGS; \ + AR="$(AR)"; export AR; \ + AS="$(AS)"; export AS; \ + CC_FOR_BUILD="$(CC_FOR_BUILD)"; export CC_FOR_BUILD; \ + DLLTOOL="$(DLLTOOL)"; export DLLTOOL; \ + LD="$(LD)"; export LD; \ + NM="$(NM)"; export NM; \ + RANLIB="$(RANLIB)"; export RANLIB; \ + WINDRES="$(WINDRES)"; export WINDRES; \ + OBJCOPY="$(OBJCOPY)"; export OBJCOPY; \ + OBJDUMP="$(OBJDUMP)"; export OBJDUMP; \ + echo Configuring in tix; \ + cd tix || exit 1; \ + case $(srcdir) in \ + \.) \ + srcdiroption="--srcdir=."; \ + libsrcdir=".";; \ + /* | [A-Za-z]:[\\/]*) \ + srcdiroption="--srcdir=$(srcdir)/tix"; \ + libsrcdir="$$s/tix";; \ + *) \ + srcdiroption="--srcdir=../$(srcdir)/tix"; \ + libsrcdir="$$s/tix";; \ + esac; \ + $(SHELL) $${libsrcdir}/configure \ + $(HOST_CONFIGARGS) $${srcdiroption} \ || exit 1 +.PHONY: all-tix maybe-all-tix +maybe-all-tix: +all-tix: configure-tix + @r=`${PWD_COMMAND}`; export r; \ + s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ + $(SET_LIB_PATH) \ + (cd tix && $(MAKE) $(FLAGS_TO_PASS) $(X11_FLAGS_TO_PASS) all) -.PHONY: maybe-maintainer-clean-dejagnu maintainer-clean-dejagnu -maybe-maintainer-clean-dejagnu: +.PHONY: check-tix maybe-check-tix +maybe-check-tix: -maintainer-clean-dejagnu: - @[ -f ./dejagnu/Makefile ] || exit 0; \ - r=`${PWD_COMMAND}`; export r; \ +check-tix: + @r=`${PWD_COMMAND}`; export r; \ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ $(SET_LIB_PATH) \ - for flag in $(EXTRA_HOST_FLAGS); do \ - eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \ - done; \ - echo "Doing maintainer-clean in dejagnu" ; \ - (cd dejagnu && \ - $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \ - "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \ - "RANLIB=$${RANLIB}" \ - "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" \ - maintainer-clean) \ - || exit 1 + (cd tix && $(MAKE) $(FLAGS_TO_PASS) $(X11_FLAGS_TO_PASS) check) -.PHONY: maybe-maintainer-clean-diff maintainer-clean-diff -maybe-maintainer-clean-diff: +.PHONY: install-tix maybe-install-tix +maybe-install-tix: -maintainer-clean-diff: - @[ -f ./diff/Makefile ] || exit 0; \ - r=`${PWD_COMMAND}`; export r; \ +install-tix: installdirs + @r=`${PWD_COMMAND}`; export r; \ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ $(SET_LIB_PATH) \ - for flag in $(EXTRA_HOST_FLAGS); do \ - eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \ - done; \ - echo "Doing maintainer-clean in diff" ; \ - (cd diff && \ - $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \ - "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \ - "RANLIB=$${RANLIB}" \ - "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" \ - maintainer-clean) \ - || exit 1 + (cd tix && $(MAKE) $(FLAGS_TO_PASS) $(X11_FLAGS_TO_PASS) install) -.PHONY: maybe-maintainer-clean-dosutils maintainer-clean-dosutils -maybe-maintainer-clean-dosutils: +# Other targets (info, dvi, etc.) -maintainer-clean-dosutils: - @[ -f ./dosutils/Makefile ] || exit 0; \ +.PHONY: maybe-info-tix info-tix +maybe-info-tix: + +info-tix: \ + configure-tix + @[ -f ./tix/Makefile ] || exit 0; \ r=`${PWD_COMMAND}`; export r; \ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ $(SET_LIB_PATH) \ for flag in $(EXTRA_HOST_FLAGS); do \ eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \ done; \ - echo "Doing maintainer-clean in dosutils" ; \ - (cd dosutils && \ + echo "Doing info in tix" ; \ + (cd tix && \ $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \ "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \ "RANLIB=$${RANLIB}" \ "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" \ - maintainer-clean) \ + info) \ || exit 1 -.PHONY: maybe-maintainer-clean-etc maintainer-clean-etc -maybe-maintainer-clean-etc: +.PHONY: maybe-dvi-tix dvi-tix +maybe-dvi-tix: -maintainer-clean-etc: - @[ -f ./etc/Makefile ] || exit 0; \ +dvi-tix: \ + configure-tix + @[ -f ./tix/Makefile ] || exit 0; \ r=`${PWD_COMMAND}`; export r; \ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ $(SET_LIB_PATH) \ for flag in $(EXTRA_HOST_FLAGS); do \ eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \ done; \ - echo "Doing maintainer-clean in etc" ; \ - (cd etc && \ + echo "Doing dvi in tix" ; \ + (cd tix && \ $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \ "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \ "RANLIB=$${RANLIB}" \ "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" \ - maintainer-clean) \ + dvi) \ || exit 1 -.PHONY: maybe-maintainer-clean-fastjar maintainer-clean-fastjar -maybe-maintainer-clean-fastjar: +.PHONY: maybe-TAGS-tix TAGS-tix +maybe-TAGS-tix: -maintainer-clean-fastjar: - @[ -f ./fastjar/Makefile ] || exit 0; \ +TAGS-tix: \ + configure-tix + @[ -f ./tix/Makefile ] || exit 0; \ r=`${PWD_COMMAND}`; export r; \ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ $(SET_LIB_PATH) \ for flag in $(EXTRA_HOST_FLAGS); do \ eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \ done; \ - echo "Doing maintainer-clean in fastjar" ; \ - (cd fastjar && \ + echo "Doing TAGS in tix" ; \ + (cd tix && \ $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \ "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \ "RANLIB=$${RANLIB}" \ "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" \ - maintainer-clean) \ + TAGS) \ || exit 1 -.PHONY: maybe-maintainer-clean-fileutils maintainer-clean-fileutils -maybe-maintainer-clean-fileutils: +.PHONY: maybe-install-info-tix install-info-tix +maybe-install-info-tix: -maintainer-clean-fileutils: - @[ -f ./fileutils/Makefile ] || exit 0; \ +install-info-tix: \ + configure-tix \ + info-tix + @[ -f ./tix/Makefile ] || exit 0; \ r=`${PWD_COMMAND}`; export r; \ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ $(SET_LIB_PATH) \ for flag in $(EXTRA_HOST_FLAGS); do \ eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \ done; \ - echo "Doing maintainer-clean in fileutils" ; \ - (cd fileutils && \ + echo "Doing install-info in tix" ; \ + (cd tix && \ $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \ "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \ "RANLIB=$${RANLIB}" \ "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" \ - maintainer-clean) \ + install-info) \ || exit 1 -.PHONY: maybe-maintainer-clean-findutils maintainer-clean-findutils -maybe-maintainer-clean-findutils: +.PHONY: maybe-installcheck-tix installcheck-tix +maybe-installcheck-tix: -maintainer-clean-findutils: - @[ -f ./findutils/Makefile ] || exit 0; \ +installcheck-tix: \ + configure-tix + @[ -f ./tix/Makefile ] || exit 0; \ r=`${PWD_COMMAND}`; export r; \ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ $(SET_LIB_PATH) \ for flag in $(EXTRA_HOST_FLAGS); do \ eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \ done; \ - echo "Doing maintainer-clean in findutils" ; \ - (cd findutils && \ + echo "Doing installcheck in tix" ; \ + (cd tix && \ $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \ "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \ "RANLIB=$${RANLIB}" \ "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" \ - maintainer-clean) \ + installcheck) \ || exit 1 -.PHONY: maybe-maintainer-clean-find maintainer-clean-find -maybe-maintainer-clean-find: +.PHONY: maybe-mostlyclean-tix mostlyclean-tix +maybe-mostlyclean-tix: -maintainer-clean-find: - @[ -f ./find/Makefile ] || exit 0; \ +mostlyclean-tix: + @[ -f ./tix/Makefile ] || exit 0; \ r=`${PWD_COMMAND}`; export r; \ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ $(SET_LIB_PATH) \ for flag in $(EXTRA_HOST_FLAGS); do \ eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \ done; \ - echo "Doing maintainer-clean in find" ; \ - (cd find && \ + echo "Doing mostlyclean in tix" ; \ + (cd tix && \ $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \ "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \ "RANLIB=$${RANLIB}" \ "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" \ - maintainer-clean) \ + mostlyclean) \ || exit 1 -.PHONY: maybe-maintainer-clean-flex maintainer-clean-flex -maybe-maintainer-clean-flex: +.PHONY: maybe-clean-tix clean-tix +maybe-clean-tix: -maintainer-clean-flex: - @[ -f ./flex/Makefile ] || exit 0; \ +clean-tix: + @[ -f ./tix/Makefile ] || exit 0; \ r=`${PWD_COMMAND}`; export r; \ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ $(SET_LIB_PATH) \ for flag in $(EXTRA_HOST_FLAGS); do \ eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \ done; \ - echo "Doing maintainer-clean in flex" ; \ - (cd flex && \ + echo "Doing clean in tix" ; \ + (cd tix && \ $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \ "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \ "RANLIB=$${RANLIB}" \ "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" \ - maintainer-clean) \ + clean) \ || exit 1 -.PHONY: maybe-maintainer-clean-gas maintainer-clean-gas -maybe-maintainer-clean-gas: +.PHONY: maybe-distclean-tix distclean-tix +maybe-distclean-tix: -maintainer-clean-gas: - @[ -f ./gas/Makefile ] || exit 0; \ +distclean-tix: + @[ -f ./tix/Makefile ] || exit 0; \ r=`${PWD_COMMAND}`; export r; \ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ $(SET_LIB_PATH) \ for flag in $(EXTRA_HOST_FLAGS); do \ eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \ done; \ - echo "Doing maintainer-clean in gas" ; \ - (cd gas && \ + echo "Doing distclean in tix" ; \ + (cd tix && \ $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \ "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \ "RANLIB=$${RANLIB}" \ "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" \ - maintainer-clean) \ + distclean) \ || exit 1 -.PHONY: maybe-maintainer-clean-gawk maintainer-clean-gawk -maybe-maintainer-clean-gawk: +.PHONY: maybe-maintainer-clean-tix maintainer-clean-tix +maybe-maintainer-clean-tix: -maintainer-clean-gawk: - @[ -f ./gawk/Makefile ] || exit 0; \ +maintainer-clean-tix: + @[ -f ./tix/Makefile ] || exit 0; \ r=`${PWD_COMMAND}`; export r; \ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ $(SET_LIB_PATH) \ for flag in $(EXTRA_HOST_FLAGS); do \ eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \ done; \ - echo "Doing maintainer-clean in gawk" ; \ - (cd gawk && \ + echo "Doing maintainer-clean in tix" ; \ + (cd tix && \ $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \ "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \ "RANLIB=$${RANLIB}" \ @@ -16191,376 +18372,464 @@ maintainer-clean-gawk: || exit 1 -.PHONY: maybe-maintainer-clean-gettext maintainer-clean-gettext -maybe-maintainer-clean-gettext: -maintainer-clean-gettext: - @[ -f ./gettext/Makefile ] || exit 0; \ +.PHONY: configure-libtermcap maybe-configure-libtermcap +maybe-configure-libtermcap: +configure-libtermcap: + @test ! -f libtermcap/Makefile || exit 0; \ + [ -d libtermcap ] || mkdir libtermcap; \ r=`${PWD_COMMAND}`; export r; \ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ - $(SET_LIB_PATH) \ - for flag in $(EXTRA_HOST_FLAGS); do \ - eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \ - done; \ - echo "Doing maintainer-clean in gettext" ; \ - (cd gettext && \ - $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \ - "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \ - "RANLIB=$${RANLIB}" \ - "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" \ - maintainer-clean) \ + CC="$(CC)"; export CC; \ + CFLAGS="$(CFLAGS)"; export CFLAGS; \ + CONFIG_SHELL="$(SHELL)"; export CONFIG_SHELL; \ + CXX="$(CXX)"; export CXX; \ + CXXFLAGS="$(CXXFLAGS)"; export CXXFLAGS; \ + AR="$(AR)"; export AR; \ + AS="$(AS)"; export AS; \ + CC_FOR_BUILD="$(CC_FOR_BUILD)"; export CC_FOR_BUILD; \ + DLLTOOL="$(DLLTOOL)"; export DLLTOOL; \ + LD="$(LD)"; export LD; \ + NM="$(NM)"; export NM; \ + RANLIB="$(RANLIB)"; export RANLIB; \ + WINDRES="$(WINDRES)"; export WINDRES; \ + OBJCOPY="$(OBJCOPY)"; export OBJCOPY; \ + OBJDUMP="$(OBJDUMP)"; export OBJDUMP; \ + echo Configuring in libtermcap; \ + cd libtermcap || exit 1; \ + case $(srcdir) in \ + \.) \ + srcdiroption="--srcdir=."; \ + libsrcdir=".";; \ + /* | [A-Za-z]:[\\/]*) \ + srcdiroption="--srcdir=$(srcdir)/libtermcap"; \ + libsrcdir="$$s/libtermcap";; \ + *) \ + srcdiroption="--srcdir=../$(srcdir)/libtermcap"; \ + libsrcdir="$$s/libtermcap";; \ + esac; \ + $(SHELL) $${libsrcdir}/configure \ + $(HOST_CONFIGARGS) $${srcdiroption} \ || exit 1 +.PHONY: all-libtermcap maybe-all-libtermcap +maybe-all-libtermcap: +all-libtermcap: configure-libtermcap + @r=`${PWD_COMMAND}`; export r; \ + s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ + $(SET_LIB_PATH) \ + (cd libtermcap && $(MAKE) $(FLAGS_TO_PASS) all) + +.PHONY: check-libtermcap maybe-check-libtermcap +maybe-check-libtermcap: -.PHONY: maybe-maintainer-clean-gnuserv maintainer-clean-gnuserv -maybe-maintainer-clean-gnuserv: +check-libtermcap: -maintainer-clean-gnuserv: - @[ -f ./gnuserv/Makefile ] || exit 0; \ - r=`${PWD_COMMAND}`; export r; \ + +.PHONY: install-libtermcap maybe-install-libtermcap +maybe-install-libtermcap: + +install-libtermcap: installdirs + @r=`${PWD_COMMAND}`; export r; \ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ $(SET_LIB_PATH) \ - for flag in $(EXTRA_HOST_FLAGS); do \ - eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \ - done; \ - echo "Doing maintainer-clean in gnuserv" ; \ - (cd gnuserv && \ - $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \ - "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \ - "RANLIB=$${RANLIB}" \ - "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" \ - maintainer-clean) \ - || exit 1 + (cd libtermcap && $(MAKE) $(FLAGS_TO_PASS) install) -.PHONY: maybe-maintainer-clean-gprof maintainer-clean-gprof -maybe-maintainer-clean-gprof: +# Other targets (info, dvi, etc.) -maintainer-clean-gprof: - @[ -f ./gprof/Makefile ] || exit 0; \ +.PHONY: maybe-info-libtermcap info-libtermcap +maybe-info-libtermcap: + +info-libtermcap: \ + configure-libtermcap + @[ -f ./libtermcap/Makefile ] || exit 0; \ r=`${PWD_COMMAND}`; export r; \ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ $(SET_LIB_PATH) \ for flag in $(EXTRA_HOST_FLAGS); do \ eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \ done; \ - echo "Doing maintainer-clean in gprof" ; \ - (cd gprof && \ + echo "Doing info in libtermcap" ; \ + (cd libtermcap && \ $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \ "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \ "RANLIB=$${RANLIB}" \ "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" \ - maintainer-clean) \ + info) \ || exit 1 -.PHONY: maybe-maintainer-clean-gzip maintainer-clean-gzip -maybe-maintainer-clean-gzip: +.PHONY: maybe-dvi-libtermcap dvi-libtermcap +maybe-dvi-libtermcap: -maintainer-clean-gzip: - @[ -f ./gzip/Makefile ] || exit 0; \ +dvi-libtermcap: \ + configure-libtermcap + @[ -f ./libtermcap/Makefile ] || exit 0; \ r=`${PWD_COMMAND}`; export r; \ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ $(SET_LIB_PATH) \ for flag in $(EXTRA_HOST_FLAGS); do \ eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \ done; \ - echo "Doing maintainer-clean in gzip" ; \ - (cd gzip && \ + echo "Doing dvi in libtermcap" ; \ + (cd libtermcap && \ $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \ "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \ "RANLIB=$${RANLIB}" \ "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" \ - maintainer-clean) \ + dvi) \ || exit 1 -.PHONY: maybe-maintainer-clean-hello maintainer-clean-hello -maybe-maintainer-clean-hello: +.PHONY: maybe-TAGS-libtermcap TAGS-libtermcap +maybe-TAGS-libtermcap: -maintainer-clean-hello: - @[ -f ./hello/Makefile ] || exit 0; \ +TAGS-libtermcap: \ + configure-libtermcap + @[ -f ./libtermcap/Makefile ] || exit 0; \ r=`${PWD_COMMAND}`; export r; \ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ $(SET_LIB_PATH) \ for flag in $(EXTRA_HOST_FLAGS); do \ eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \ done; \ - echo "Doing maintainer-clean in hello" ; \ - (cd hello && \ + echo "Doing TAGS in libtermcap" ; \ + (cd libtermcap && \ $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \ "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \ "RANLIB=$${RANLIB}" \ "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" \ - maintainer-clean) \ + TAGS) \ || exit 1 -.PHONY: maybe-maintainer-clean-indent maintainer-clean-indent -maybe-maintainer-clean-indent: +.PHONY: maybe-install-info-libtermcap install-info-libtermcap +maybe-install-info-libtermcap: -maintainer-clean-indent: - @[ -f ./indent/Makefile ] || exit 0; \ +install-info-libtermcap: \ + configure-libtermcap \ + info-libtermcap + @[ -f ./libtermcap/Makefile ] || exit 0; \ r=`${PWD_COMMAND}`; export r; \ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ $(SET_LIB_PATH) \ for flag in $(EXTRA_HOST_FLAGS); do \ eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \ done; \ - echo "Doing maintainer-clean in indent" ; \ - (cd indent && \ + echo "Doing install-info in libtermcap" ; \ + (cd libtermcap && \ $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \ "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \ "RANLIB=$${RANLIB}" \ "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" \ - maintainer-clean) \ + install-info) \ || exit 1 -.PHONY: maybe-maintainer-clean-intl maintainer-clean-intl -maybe-maintainer-clean-intl: +.PHONY: maybe-installcheck-libtermcap installcheck-libtermcap +maybe-installcheck-libtermcap: -maintainer-clean-intl: - @[ -f ./intl/Makefile ] || exit 0; \ +installcheck-libtermcap: \ + configure-libtermcap + @[ -f ./libtermcap/Makefile ] || exit 0; \ r=`${PWD_COMMAND}`; export r; \ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ $(SET_LIB_PATH) \ for flag in $(EXTRA_HOST_FLAGS); do \ eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \ done; \ - echo "Doing maintainer-clean in intl" ; \ - (cd intl && \ + echo "Doing installcheck in libtermcap" ; \ + (cd libtermcap && \ $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \ "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \ "RANLIB=$${RANLIB}" \ "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" \ - maintainer-clean) \ + installcheck) \ || exit 1 -.PHONY: maybe-maintainer-clean-tcl maintainer-clean-tcl -maybe-maintainer-clean-tcl: +.PHONY: maybe-mostlyclean-libtermcap mostlyclean-libtermcap +maybe-mostlyclean-libtermcap: -maintainer-clean-tcl: - @[ -f ./tcl/Makefile ] || exit 0; \ +# libtermcap doesn't support mostlyclean. +mostlyclean-libtermcap: + + +.PHONY: maybe-clean-libtermcap clean-libtermcap +maybe-clean-libtermcap: + +# libtermcap doesn't support clean. +clean-libtermcap: + + +.PHONY: maybe-distclean-libtermcap distclean-libtermcap +maybe-distclean-libtermcap: + +# libtermcap doesn't support distclean. +distclean-libtermcap: + + +.PHONY: maybe-maintainer-clean-libtermcap maintainer-clean-libtermcap +maybe-maintainer-clean-libtermcap: + +# libtermcap doesn't support maintainer-clean. +maintainer-clean-libtermcap: + + + +.PHONY: configure-utils maybe-configure-utils +maybe-configure-utils: +configure-utils: + @test ! -f utils/Makefile || exit 0; \ + [ -d utils ] || mkdir utils; \ r=`${PWD_COMMAND}`; export r; \ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ - $(SET_LIB_PATH) \ - for flag in $(EXTRA_HOST_FLAGS); do \ - eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \ - done; \ - echo "Doing maintainer-clean in tcl" ; \ - (cd tcl && \ - $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \ - "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \ - "RANLIB=$${RANLIB}" \ - "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" \ - maintainer-clean) \ + CC="$(CC)"; export CC; \ + CFLAGS="$(CFLAGS)"; export CFLAGS; \ + CONFIG_SHELL="$(SHELL)"; export CONFIG_SHELL; \ + CXX="$(CXX)"; export CXX; \ + CXXFLAGS="$(CXXFLAGS)"; export CXXFLAGS; \ + AR="$(AR)"; export AR; \ + AS="$(AS)"; export AS; \ + CC_FOR_BUILD="$(CC_FOR_BUILD)"; export CC_FOR_BUILD; \ + DLLTOOL="$(DLLTOOL)"; export DLLTOOL; \ + LD="$(LD)"; export LD; \ + NM="$(NM)"; export NM; \ + RANLIB="$(RANLIB)"; export RANLIB; \ + WINDRES="$(WINDRES)"; export WINDRES; \ + OBJCOPY="$(OBJCOPY)"; export OBJCOPY; \ + OBJDUMP="$(OBJDUMP)"; export OBJDUMP; \ + echo Configuring in utils; \ + cd utils || exit 1; \ + case $(srcdir) in \ + \.) \ + srcdiroption="--srcdir=."; \ + libsrcdir=".";; \ + /* | [A-Za-z]:[\\/]*) \ + srcdiroption="--srcdir=$(srcdir)/utils"; \ + libsrcdir="$$s/utils";; \ + *) \ + srcdiroption="--srcdir=../$(srcdir)/utils"; \ + libsrcdir="$$s/utils";; \ + esac; \ + $(SHELL) $${libsrcdir}/configure \ + $(HOST_CONFIGARGS) $${srcdiroption} \ || exit 1 +.PHONY: all-utils maybe-all-utils +maybe-all-utils: +all-utils: configure-utils + @r=`${PWD_COMMAND}`; export r; \ + s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ + $(SET_LIB_PATH) \ + (cd utils && $(MAKE) $(FLAGS_TO_PASS) all) -.PHONY: maybe-maintainer-clean-itcl maintainer-clean-itcl -maybe-maintainer-clean-itcl: +.PHONY: check-utils maybe-check-utils +maybe-check-utils: -maintainer-clean-itcl: - @[ -f ./itcl/Makefile ] || exit 0; \ - r=`${PWD_COMMAND}`; export r; \ +check-utils: + + +.PHONY: install-utils maybe-install-utils +maybe-install-utils: + +install-utils: installdirs + @r=`${PWD_COMMAND}`; export r; \ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ $(SET_LIB_PATH) \ - for flag in $(EXTRA_HOST_FLAGS); do \ - eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \ - done; \ - echo "Doing maintainer-clean in itcl" ; \ - (cd itcl && \ - $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \ - "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \ - "RANLIB=$${RANLIB}" \ - "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" \ - maintainer-clean) \ - || exit 1 + (cd utils && $(MAKE) $(FLAGS_TO_PASS) install) -.PHONY: maybe-maintainer-clean-ld maintainer-clean-ld -maybe-maintainer-clean-ld: +# Other targets (info, dvi, etc.) -maintainer-clean-ld: - @[ -f ./ld/Makefile ] || exit 0; \ +.PHONY: maybe-info-utils info-utils +maybe-info-utils: + +info-utils: \ + configure-utils + @[ -f ./utils/Makefile ] || exit 0; \ r=`${PWD_COMMAND}`; export r; \ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ $(SET_LIB_PATH) \ for flag in $(EXTRA_HOST_FLAGS); do \ eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \ done; \ - echo "Doing maintainer-clean in ld" ; \ - (cd ld && \ + echo "Doing info in utils" ; \ + (cd utils && \ $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \ "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \ "RANLIB=$${RANLIB}" \ "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" \ - maintainer-clean) \ + info) \ || exit 1 -.PHONY: maybe-maintainer-clean-libgui maintainer-clean-libgui -maybe-maintainer-clean-libgui: +.PHONY: maybe-dvi-utils dvi-utils +maybe-dvi-utils: -maintainer-clean-libgui: - @[ -f ./libgui/Makefile ] || exit 0; \ +dvi-utils: \ + configure-utils + @[ -f ./utils/Makefile ] || exit 0; \ r=`${PWD_COMMAND}`; export r; \ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ $(SET_LIB_PATH) \ for flag in $(EXTRA_HOST_FLAGS); do \ eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \ done; \ - echo "Doing maintainer-clean in libgui" ; \ - (cd libgui && \ + echo "Doing dvi in utils" ; \ + (cd utils && \ $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \ "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \ "RANLIB=$${RANLIB}" \ "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" \ - maintainer-clean) \ + dvi) \ || exit 1 -.PHONY: maybe-maintainer-clean-libiberty maintainer-clean-libiberty -maybe-maintainer-clean-libiberty: +.PHONY: maybe-TAGS-utils TAGS-utils +maybe-TAGS-utils: -maintainer-clean-libiberty: - @[ -f ./libiberty/Makefile ] || exit 0; \ +TAGS-utils: \ + configure-utils + @[ -f ./utils/Makefile ] || exit 0; \ r=`${PWD_COMMAND}`; export r; \ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ $(SET_LIB_PATH) \ for flag in $(EXTRA_HOST_FLAGS); do \ eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \ done; \ - echo "Doing maintainer-clean in libiberty" ; \ - (cd libiberty && \ + echo "Doing TAGS in utils" ; \ + (cd utils && \ $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \ "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \ "RANLIB=$${RANLIB}" \ "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" \ - maintainer-clean) \ + TAGS) \ || exit 1 -.PHONY: maybe-maintainer-clean-libtool maintainer-clean-libtool -maybe-maintainer-clean-libtool: +.PHONY: maybe-install-info-utils install-info-utils +maybe-install-info-utils: -maintainer-clean-libtool: - @[ -f ./libtool/Makefile ] || exit 0; \ +install-info-utils: \ + configure-utils \ + info-utils + @[ -f ./utils/Makefile ] || exit 0; \ r=`${PWD_COMMAND}`; export r; \ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ $(SET_LIB_PATH) \ for flag in $(EXTRA_HOST_FLAGS); do \ eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \ done; \ - echo "Doing maintainer-clean in libtool" ; \ - (cd libtool && \ + echo "Doing install-info in utils" ; \ + (cd utils && \ $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \ "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \ "RANLIB=$${RANLIB}" \ "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" \ - maintainer-clean) \ + install-info) \ || exit 1 -.PHONY: maybe-maintainer-clean-m4 maintainer-clean-m4 -maybe-maintainer-clean-m4: +.PHONY: maybe-installcheck-utils installcheck-utils +maybe-installcheck-utils: -maintainer-clean-m4: - @[ -f ./m4/Makefile ] || exit 0; \ +installcheck-utils: \ + configure-utils + @[ -f ./utils/Makefile ] || exit 0; \ r=`${PWD_COMMAND}`; export r; \ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ $(SET_LIB_PATH) \ for flag in $(EXTRA_HOST_FLAGS); do \ eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \ done; \ - echo "Doing maintainer-clean in m4" ; \ - (cd m4 && \ + echo "Doing installcheck in utils" ; \ + (cd utils && \ $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \ "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \ "RANLIB=$${RANLIB}" \ "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" \ - maintainer-clean) \ + installcheck) \ || exit 1 -.PHONY: maybe-maintainer-clean-make maintainer-clean-make -maybe-maintainer-clean-make: +.PHONY: maybe-mostlyclean-utils mostlyclean-utils +maybe-mostlyclean-utils: -maintainer-clean-make: - @[ -f ./make/Makefile ] || exit 0; \ +mostlyclean-utils: + @[ -f ./utils/Makefile ] || exit 0; \ r=`${PWD_COMMAND}`; export r; \ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ $(SET_LIB_PATH) \ for flag in $(EXTRA_HOST_FLAGS); do \ eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \ done; \ - echo "Doing maintainer-clean in make" ; \ - (cd make && \ + echo "Doing mostlyclean in utils" ; \ + (cd utils && \ $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \ "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \ "RANLIB=$${RANLIB}" \ "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" \ - maintainer-clean) \ + mostlyclean) \ || exit 1 -.PHONY: maybe-maintainer-clean-mmalloc maintainer-clean-mmalloc -maybe-maintainer-clean-mmalloc: +.PHONY: maybe-clean-utils clean-utils +maybe-clean-utils: -maintainer-clean-mmalloc: - @[ -f ./mmalloc/Makefile ] || exit 0; \ +clean-utils: + @[ -f ./utils/Makefile ] || exit 0; \ r=`${PWD_COMMAND}`; export r; \ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ $(SET_LIB_PATH) \ for flag in $(EXTRA_HOST_FLAGS); do \ eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \ done; \ - echo "Doing maintainer-clean in mmalloc" ; \ - (cd mmalloc && \ + echo "Doing clean in utils" ; \ + (cd utils && \ $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \ "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \ "RANLIB=$${RANLIB}" \ "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" \ - maintainer-clean) \ + clean) \ || exit 1 -.PHONY: maybe-maintainer-clean-patch maintainer-clean-patch -maybe-maintainer-clean-patch: +.PHONY: maybe-distclean-utils distclean-utils +maybe-distclean-utils: -maintainer-clean-patch: - @[ -f ./patch/Makefile ] || exit 0; \ +distclean-utils: + @[ -f ./utils/Makefile ] || exit 0; \ r=`${PWD_COMMAND}`; export r; \ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ $(SET_LIB_PATH) \ for flag in $(EXTRA_HOST_FLAGS); do \ eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \ done; \ - echo "Doing maintainer-clean in patch" ; \ - (cd patch && \ + echo "Doing distclean in utils" ; \ + (cd utils && \ $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \ "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \ "RANLIB=$${RANLIB}" \ "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" \ - maintainer-clean) \ + distclean) \ || exit 1 -.PHONY: maybe-maintainer-clean-perl maintainer-clean-perl -maybe-maintainer-clean-perl: +.PHONY: maybe-maintainer-clean-utils maintainer-clean-utils +maybe-maintainer-clean-utils: -maintainer-clean-perl: - @[ -f ./perl/Makefile ] || exit 0; \ +maintainer-clean-utils: + @[ -f ./utils/Makefile ] || exit 0; \ r=`${PWD_COMMAND}`; export r; \ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ $(SET_LIB_PATH) \ for flag in $(EXTRA_HOST_FLAGS); do \ eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \ done; \ - echo "Doing maintainer-clean in perl" ; \ - (cd perl && \ + echo "Doing maintainer-clean in utils" ; \ + (cd utils && \ $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \ "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \ "RANLIB=$${RANLIB}" \ @@ -16569,208 +18838,282 @@ maintainer-clean-perl: || exit 1 -.PHONY: maybe-maintainer-clean-prms maintainer-clean-prms -maybe-maintainer-clean-prms: -maintainer-clean-prms: - @[ -f ./prms/Makefile ] || exit 0; \ + +# --------------------------------------- +# Modules which run on the target machine +# --------------------------------------- + +.PHONY: configure-target-libstdc++-v3 maybe-configure-target-libstdc++-v3 +maybe-configure-target-libstdc++-v3: + +# There's only one multilib.out. Cleverer subdirs shouldn't need it copied. +$(TARGET_SUBDIR)/libstdc++-v3/multilib.out: multilib.out + $(SHELL) $(srcdir)/mkinstalldirs $(TARGET_SUBDIR)/libstdc++-v3 ; \ + rm -f $(TARGET_SUBDIR)/libstdc++-v3/Makefile || : ; \ + cp multilib.out $(TARGET_SUBDIR)/libstdc++-v3/multilib.out + +configure-target-libstdc++-v3: $(TARGET_SUBDIR)/libstdc++-v3/multilib.out + @test ! -f $(TARGET_SUBDIR)/libstdc++-v3/Makefile || exit 0; \ + $(SHELL) $(srcdir)/mkinstalldirs $(TARGET_SUBDIR)/libstdc++-v3 ; \ r=`${PWD_COMMAND}`; export r; \ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ $(SET_LIB_PATH) \ - for flag in $(EXTRA_HOST_FLAGS); do \ - eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \ - done; \ - echo "Doing maintainer-clean in prms" ; \ - (cd prms && \ - $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \ - "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \ - "RANLIB=$${RANLIB}" \ - "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" \ - maintainer-clean) \ + AR="$(AR_FOR_TARGET)"; export AR; \ + AS="$(AS_FOR_TARGET)"; export AS; \ + CC="$(CC_FOR_TARGET)"; export CC; \ + CFLAGS="$(CFLAGS_FOR_TARGET)"; export CFLAGS; \ + CONFIG_SHELL="$(SHELL)"; export CONFIG_SHELL; \ + CPPFLAGS="$(CFLAGS_FOR_TARGET)"; export CPPFLAGS; \ + CXX_FOR_TARGET="$(RAW_CXX_FOR_TARGET)"; export CXX_FOR_TARGET; \ + CXX="$(RAW_CXX_FOR_TARGET)"; export CXX; \ + CXXFLAGS="$(CXXFLAGS_FOR_TARGET)"; export CXXFLAGS; \ + GCJ="$(GCJ_FOR_TARGET)"; export GCJ; \ + DLLTOOL="$(DLLTOOL_FOR_TARGET)"; export DLLTOOL; \ + LD="$(LD_FOR_TARGET)"; export LD; \ + LDFLAGS="$(LDFLAGS_FOR_TARGET)"; export LDFLAGS; \ + NM="$(NM_FOR_TARGET)"; export NM; \ + RANLIB="$(RANLIB_FOR_TARGET)"; export RANLIB; \ + WINDRES="$(WINDRES_FOR_TARGET)"; export WINDRES; \ + echo Configuring in $(TARGET_SUBDIR)/libstdc++-v3; \ + cd "$(TARGET_SUBDIR)/libstdc++-v3" || exit 1; \ + case $(srcdir) in \ + /* | [A-Za-z]:[\\/]*) \ + topdir=$(srcdir) ;; \ + *) \ + case "$(TARGET_SUBDIR)" in \ + .) topdir="../$(srcdir)" ;; \ + *) topdir="../../$(srcdir)" ;; \ + esac ;; \ + esac; \ + srcdiroption="--srcdir=$${topdir}/libstdc++-v3"; \ + libsrcdir="$$s/libstdc++-v3"; \ + rm -f no-such-file || : ; \ + CONFIG_SITE=no-such-file $(SHELL) $${libsrcdir}/configure \ + $(TARGET_CONFIGARGS) $${srcdiroption} \ + --with-target-subdir="$(TARGET_SUBDIR)" \ || exit 1 +.PHONY: all-target-libstdc++-v3 maybe-all-target-libstdc++-v3 +maybe-all-target-libstdc++-v3: +all-target-libstdc++-v3: configure-target-libstdc++-v3 + @r=`${PWD_COMMAND}`; export r; \ + s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ + $(SET_LIB_PATH) \ + (cd $(TARGET_SUBDIR)/libstdc++-v3 && \ + $(MAKE) $(TARGET_FLAGS_TO_PASS) 'CXX=$$(RAW_CXX_FOR_TARGET)' 'CXX_FOR_TARGET=$$(RAW_CXX_FOR_TARGET)' all) -.PHONY: maybe-maintainer-clean-rcs maintainer-clean-rcs -maybe-maintainer-clean-rcs: +.PHONY: check-target-libstdc++-v3 maybe-check-target-libstdc++-v3 +maybe-check-target-libstdc++-v3: -maintainer-clean-rcs: - @[ -f ./rcs/Makefile ] || exit 0; \ +check-target-libstdc++-v3: + @r=`${PWD_COMMAND}`; export r; \ + s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ + $(SET_LIB_PATH) \ + (cd $(TARGET_SUBDIR)/libstdc++-v3 && \ + $(MAKE) $(TARGET_FLAGS_TO_PASS) 'CXX=$$(RAW_CXX_FOR_TARGET)' 'CXX_FOR_TARGET=$$(RAW_CXX_FOR_TARGET)' check) + + +.PHONY: install-target-libstdc++-v3 maybe-install-target-libstdc++-v3 +maybe-install-target-libstdc++-v3: + +install-target-libstdc++-v3: installdirs + @r=`${PWD_COMMAND}`; export r; \ + s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ + $(SET_LIB_PATH) \ + (cd $(TARGET_SUBDIR)/libstdc++-v3 && \ + $(MAKE) $(TARGET_FLAGS_TO_PASS) install) + + +# Other targets (info, dvi, etc.) + +.PHONY: maybe-info-target-libstdc++-v3 info-target-libstdc++-v3 +maybe-info-target-libstdc++-v3: + +info-target-libstdc++-v3: \ + configure-target-libstdc++-v3 + @[ -f $(TARGET_SUBDIR)/libstdc++-v3/Makefile ] || exit 0 ; \ r=`${PWD_COMMAND}`; export r; \ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ $(SET_LIB_PATH) \ - for flag in $(EXTRA_HOST_FLAGS); do \ + echo "Doing info in $(TARGET_SUBDIR)/libstdc++-v3" ; \ + for flag in $(EXTRA_TARGET_FLAGS); do \ eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \ done; \ - echo "Doing maintainer-clean in rcs" ; \ - (cd rcs && \ + (cd $(TARGET_SUBDIR)/libstdc++-v3 && \ $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \ "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \ "RANLIB=$${RANLIB}" \ "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" \ - maintainer-clean) \ + info) \ || exit 1 -.PHONY: maybe-maintainer-clean-readline maintainer-clean-readline -maybe-maintainer-clean-readline: +.PHONY: maybe-dvi-target-libstdc++-v3 dvi-target-libstdc++-v3 +maybe-dvi-target-libstdc++-v3: -maintainer-clean-readline: - @[ -f ./readline/Makefile ] || exit 0; \ +dvi-target-libstdc++-v3: \ + configure-target-libstdc++-v3 + @[ -f $(TARGET_SUBDIR)/libstdc++-v3/Makefile ] || exit 0 ; \ r=`${PWD_COMMAND}`; export r; \ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ $(SET_LIB_PATH) \ - for flag in $(EXTRA_HOST_FLAGS); do \ + echo "Doing dvi in $(TARGET_SUBDIR)/libstdc++-v3" ; \ + for flag in $(EXTRA_TARGET_FLAGS); do \ eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \ done; \ - echo "Doing maintainer-clean in readline" ; \ - (cd readline && \ + (cd $(TARGET_SUBDIR)/libstdc++-v3 && \ $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \ "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \ "RANLIB=$${RANLIB}" \ "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" \ - maintainer-clean) \ + dvi) \ || exit 1 -.PHONY: maybe-maintainer-clean-release maintainer-clean-release -maybe-maintainer-clean-release: +.PHONY: maybe-TAGS-target-libstdc++-v3 TAGS-target-libstdc++-v3 +maybe-TAGS-target-libstdc++-v3: -maintainer-clean-release: - @[ -f ./release/Makefile ] || exit 0; \ +TAGS-target-libstdc++-v3: \ + configure-target-libstdc++-v3 + @[ -f $(TARGET_SUBDIR)/libstdc++-v3/Makefile ] || exit 0 ; \ r=`${PWD_COMMAND}`; export r; \ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ $(SET_LIB_PATH) \ - for flag in $(EXTRA_HOST_FLAGS); do \ + echo "Doing TAGS in $(TARGET_SUBDIR)/libstdc++-v3" ; \ + for flag in $(EXTRA_TARGET_FLAGS); do \ eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \ done; \ - echo "Doing maintainer-clean in release" ; \ - (cd release && \ + (cd $(TARGET_SUBDIR)/libstdc++-v3 && \ $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \ "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \ "RANLIB=$${RANLIB}" \ "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" \ - maintainer-clean) \ + TAGS) \ || exit 1 -.PHONY: maybe-maintainer-clean-recode maintainer-clean-recode -maybe-maintainer-clean-recode: +.PHONY: maybe-install-info-target-libstdc++-v3 install-info-target-libstdc++-v3 +maybe-install-info-target-libstdc++-v3: -maintainer-clean-recode: - @[ -f ./recode/Makefile ] || exit 0; \ +install-info-target-libstdc++-v3: \ + configure-target-libstdc++-v3 \ + info-target-libstdc++-v3 + @[ -f $(TARGET_SUBDIR)/libstdc++-v3/Makefile ] || exit 0 ; \ r=`${PWD_COMMAND}`; export r; \ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ $(SET_LIB_PATH) \ - for flag in $(EXTRA_HOST_FLAGS); do \ + echo "Doing install-info in $(TARGET_SUBDIR)/libstdc++-v3" ; \ + for flag in $(EXTRA_TARGET_FLAGS); do \ eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \ done; \ - echo "Doing maintainer-clean in recode" ; \ - (cd recode && \ + (cd $(TARGET_SUBDIR)/libstdc++-v3 && \ $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \ "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \ "RANLIB=$${RANLIB}" \ "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" \ - maintainer-clean) \ + install-info) \ || exit 1 -.PHONY: maybe-maintainer-clean-sed maintainer-clean-sed -maybe-maintainer-clean-sed: +.PHONY: maybe-installcheck-target-libstdc++-v3 installcheck-target-libstdc++-v3 +maybe-installcheck-target-libstdc++-v3: -maintainer-clean-sed: - @[ -f ./sed/Makefile ] || exit 0; \ +installcheck-target-libstdc++-v3: \ + configure-target-libstdc++-v3 + @[ -f $(TARGET_SUBDIR)/libstdc++-v3/Makefile ] || exit 0 ; \ r=`${PWD_COMMAND}`; export r; \ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ $(SET_LIB_PATH) \ - for flag in $(EXTRA_HOST_FLAGS); do \ + echo "Doing installcheck in $(TARGET_SUBDIR)/libstdc++-v3" ; \ + for flag in $(EXTRA_TARGET_FLAGS); do \ eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \ done; \ - echo "Doing maintainer-clean in sed" ; \ - (cd sed && \ + (cd $(TARGET_SUBDIR)/libstdc++-v3 && \ $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \ "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \ "RANLIB=$${RANLIB}" \ "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" \ - maintainer-clean) \ + installcheck) \ || exit 1 -.PHONY: maybe-maintainer-clean-send-pr maintainer-clean-send-pr -maybe-maintainer-clean-send-pr: +.PHONY: maybe-mostlyclean-target-libstdc++-v3 mostlyclean-target-libstdc++-v3 +maybe-mostlyclean-target-libstdc++-v3: -maintainer-clean-send-pr: - @[ -f ./send-pr/Makefile ] || exit 0; \ +mostlyclean-target-libstdc++-v3: + @[ -f $(TARGET_SUBDIR)/libstdc++-v3/Makefile ] || exit 0 ; \ r=`${PWD_COMMAND}`; export r; \ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ $(SET_LIB_PATH) \ - for flag in $(EXTRA_HOST_FLAGS); do \ + echo "Doing mostlyclean in $(TARGET_SUBDIR)/libstdc++-v3" ; \ + for flag in $(EXTRA_TARGET_FLAGS); do \ eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \ done; \ - echo "Doing maintainer-clean in send-pr" ; \ - (cd send-pr && \ + (cd $(TARGET_SUBDIR)/libstdc++-v3 && \ $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \ "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \ "RANLIB=$${RANLIB}" \ "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" \ - maintainer-clean) \ + mostlyclean) \ || exit 1 -.PHONY: maybe-maintainer-clean-shellutils maintainer-clean-shellutils -maybe-maintainer-clean-shellutils: +.PHONY: maybe-clean-target-libstdc++-v3 clean-target-libstdc++-v3 +maybe-clean-target-libstdc++-v3: -maintainer-clean-shellutils: - @[ -f ./shellutils/Makefile ] || exit 0; \ +clean-target-libstdc++-v3: + @[ -f $(TARGET_SUBDIR)/libstdc++-v3/Makefile ] || exit 0 ; \ r=`${PWD_COMMAND}`; export r; \ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ $(SET_LIB_PATH) \ - for flag in $(EXTRA_HOST_FLAGS); do \ + echo "Doing clean in $(TARGET_SUBDIR)/libstdc++-v3" ; \ + for flag in $(EXTRA_TARGET_FLAGS); do \ eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \ done; \ - echo "Doing maintainer-clean in shellutils" ; \ - (cd shellutils && \ + (cd $(TARGET_SUBDIR)/libstdc++-v3 && \ $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \ "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \ "RANLIB=$${RANLIB}" \ "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" \ - maintainer-clean) \ + clean) \ || exit 1 -.PHONY: maybe-maintainer-clean-sid maintainer-clean-sid -maybe-maintainer-clean-sid: +.PHONY: maybe-distclean-target-libstdc++-v3 distclean-target-libstdc++-v3 +maybe-distclean-target-libstdc++-v3: -maintainer-clean-sid: - @[ -f ./sid/Makefile ] || exit 0; \ +distclean-target-libstdc++-v3: + @[ -f $(TARGET_SUBDIR)/libstdc++-v3/Makefile ] || exit 0 ; \ r=`${PWD_COMMAND}`; export r; \ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ $(SET_LIB_PATH) \ - for flag in $(EXTRA_HOST_FLAGS); do \ + echo "Doing distclean in $(TARGET_SUBDIR)/libstdc++-v3" ; \ + for flag in $(EXTRA_TARGET_FLAGS); do \ eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \ done; \ - echo "Doing maintainer-clean in sid" ; \ - (cd sid && \ + (cd $(TARGET_SUBDIR)/libstdc++-v3 && \ $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \ "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \ "RANLIB=$${RANLIB}" \ "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" \ - maintainer-clean) \ + distclean) \ || exit 1 -.PHONY: maybe-maintainer-clean-sim maintainer-clean-sim -maybe-maintainer-clean-sim: +.PHONY: maybe-maintainer-clean-target-libstdc++-v3 maintainer-clean-target-libstdc++-v3 +maybe-maintainer-clean-target-libstdc++-v3: -maintainer-clean-sim: - @[ -f ./sim/Makefile ] || exit 0; \ +maintainer-clean-target-libstdc++-v3: + @[ -f $(TARGET_SUBDIR)/libstdc++-v3/Makefile ] || exit 0 ; \ r=`${PWD_COMMAND}`; export r; \ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ $(SET_LIB_PATH) \ - for flag in $(EXTRA_HOST_FLAGS); do \ + echo "Doing maintainer-clean in $(TARGET_SUBDIR)/libstdc++-v3" ; \ + for flag in $(EXTRA_TARGET_FLAGS); do \ eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \ done; \ - echo "Doing maintainer-clean in sim" ; \ - (cd sim && \ + (cd $(TARGET_SUBDIR)/libstdc++-v3 && \ $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \ "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \ "RANLIB=$${RANLIB}" \ @@ -16779,208 +19122,276 @@ maintainer-clean-sim: || exit 1 -.PHONY: maybe-maintainer-clean-tar maintainer-clean-tar -maybe-maintainer-clean-tar: -maintainer-clean-tar: - @[ -f ./tar/Makefile ] || exit 0; \ +.PHONY: configure-target-newlib maybe-configure-target-newlib +maybe-configure-target-newlib: + +# There's only one multilib.out. Cleverer subdirs shouldn't need it copied. +$(TARGET_SUBDIR)/newlib/multilib.out: multilib.out + $(SHELL) $(srcdir)/mkinstalldirs $(TARGET_SUBDIR)/newlib ; \ + rm -f $(TARGET_SUBDIR)/newlib/Makefile || : ; \ + cp multilib.out $(TARGET_SUBDIR)/newlib/multilib.out + +configure-target-newlib: $(TARGET_SUBDIR)/newlib/multilib.out + @test ! -f $(TARGET_SUBDIR)/newlib/Makefile || exit 0; \ + $(SHELL) $(srcdir)/mkinstalldirs $(TARGET_SUBDIR)/newlib ; \ r=`${PWD_COMMAND}`; export r; \ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ $(SET_LIB_PATH) \ - for flag in $(EXTRA_HOST_FLAGS); do \ - eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \ - done; \ - echo "Doing maintainer-clean in tar" ; \ - (cd tar && \ - $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \ - "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \ - "RANLIB=$${RANLIB}" \ - "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" \ - maintainer-clean) \ + AR="$(AR_FOR_TARGET)"; export AR; \ + AS="$(AS_FOR_TARGET)"; export AS; \ + CC="$(CC_FOR_TARGET)"; export CC; \ + CFLAGS="$(CFLAGS_FOR_TARGET)"; export CFLAGS; \ + CONFIG_SHELL="$(SHELL)"; export CONFIG_SHELL; \ + CPPFLAGS="$(CFLAGS_FOR_TARGET)"; export CPPFLAGS; \ + CXX="$(CXX_FOR_TARGET)"; export CXX; \ + CXXFLAGS="$(CXXFLAGS_FOR_TARGET)"; export CXXFLAGS; \ + GCJ="$(GCJ_FOR_TARGET)"; export GCJ; \ + DLLTOOL="$(DLLTOOL_FOR_TARGET)"; export DLLTOOL; \ + LD="$(LD_FOR_TARGET)"; export LD; \ + LDFLAGS="$(LDFLAGS_FOR_TARGET)"; export LDFLAGS; \ + NM="$(NM_FOR_TARGET)"; export NM; \ + RANLIB="$(RANLIB_FOR_TARGET)"; export RANLIB; \ + WINDRES="$(WINDRES_FOR_TARGET)"; export WINDRES; \ + echo Configuring in $(TARGET_SUBDIR)/newlib; \ + cd "$(TARGET_SUBDIR)/newlib" || exit 1; \ + case $(srcdir) in \ + /* | [A-Za-z]:[\\/]*) \ + topdir=$(srcdir) ;; \ + *) \ + case "$(TARGET_SUBDIR)" in \ + .) topdir="../$(srcdir)" ;; \ + *) topdir="../../$(srcdir)" ;; \ + esac ;; \ + esac; \ + srcdiroption="--srcdir=$${topdir}/newlib"; \ + libsrcdir="$$s/newlib"; \ + rm -f no-such-file || : ; \ + CONFIG_SITE=no-such-file $(SHELL) $${libsrcdir}/configure \ + $(TARGET_CONFIGARGS) $${srcdiroption} \ + --with-target-subdir="$(TARGET_SUBDIR)" \ || exit 1 +.PHONY: all-target-newlib maybe-all-target-newlib +maybe-all-target-newlib: +all-target-newlib: configure-target-newlib + @r=`${PWD_COMMAND}`; export r; \ + s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ + $(SET_LIB_PATH) \ + (cd $(TARGET_SUBDIR)/newlib && \ + $(MAKE) $(TARGET_FLAGS_TO_PASS) all) -.PHONY: maybe-maintainer-clean-texinfo maintainer-clean-texinfo -maybe-maintainer-clean-texinfo: +.PHONY: check-target-newlib maybe-check-target-newlib +maybe-check-target-newlib: -maintainer-clean-texinfo: - @[ -f ./texinfo/Makefile ] || exit 0; \ +check-target-newlib: + @r=`${PWD_COMMAND}`; export r; \ + s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ + $(SET_LIB_PATH) \ + (cd $(TARGET_SUBDIR)/newlib && \ + $(MAKE) $(TARGET_FLAGS_TO_PASS) check) + + +.PHONY: install-target-newlib maybe-install-target-newlib +maybe-install-target-newlib: + +install-target-newlib: installdirs + @r=`${PWD_COMMAND}`; export r; \ + s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ + $(SET_LIB_PATH) \ + (cd $(TARGET_SUBDIR)/newlib && \ + $(MAKE) $(TARGET_FLAGS_TO_PASS) install) + + +# Other targets (info, dvi, etc.) + +.PHONY: maybe-info-target-newlib info-target-newlib +maybe-info-target-newlib: + +info-target-newlib: \ + configure-target-newlib + @[ -f $(TARGET_SUBDIR)/newlib/Makefile ] || exit 0 ; \ r=`${PWD_COMMAND}`; export r; \ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ $(SET_LIB_PATH) \ - for flag in $(EXTRA_HOST_FLAGS); do \ + echo "Doing info in $(TARGET_SUBDIR)/newlib" ; \ + for flag in $(EXTRA_TARGET_FLAGS); do \ eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \ done; \ - echo "Doing maintainer-clean in texinfo" ; \ - (cd texinfo && \ + (cd $(TARGET_SUBDIR)/newlib && \ $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \ "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \ "RANLIB=$${RANLIB}" \ "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" \ - maintainer-clean) \ + info) \ || exit 1 -.PHONY: maybe-maintainer-clean-textutils maintainer-clean-textutils -maybe-maintainer-clean-textutils: +.PHONY: maybe-dvi-target-newlib dvi-target-newlib +maybe-dvi-target-newlib: -maintainer-clean-textutils: - @[ -f ./textutils/Makefile ] || exit 0; \ +dvi-target-newlib: \ + configure-target-newlib + @[ -f $(TARGET_SUBDIR)/newlib/Makefile ] || exit 0 ; \ r=`${PWD_COMMAND}`; export r; \ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ $(SET_LIB_PATH) \ - for flag in $(EXTRA_HOST_FLAGS); do \ + echo "Doing dvi in $(TARGET_SUBDIR)/newlib" ; \ + for flag in $(EXTRA_TARGET_FLAGS); do \ eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \ done; \ - echo "Doing maintainer-clean in textutils" ; \ - (cd textutils && \ + (cd $(TARGET_SUBDIR)/newlib && \ $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \ "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \ "RANLIB=$${RANLIB}" \ "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" \ - maintainer-clean) \ + dvi) \ || exit 1 -.PHONY: maybe-maintainer-clean-time maintainer-clean-time -maybe-maintainer-clean-time: +.PHONY: maybe-TAGS-target-newlib TAGS-target-newlib +maybe-TAGS-target-newlib: -maintainer-clean-time: - @[ -f ./time/Makefile ] || exit 0; \ +TAGS-target-newlib: \ + configure-target-newlib + @[ -f $(TARGET_SUBDIR)/newlib/Makefile ] || exit 0 ; \ r=`${PWD_COMMAND}`; export r; \ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ $(SET_LIB_PATH) \ - for flag in $(EXTRA_HOST_FLAGS); do \ + echo "Doing TAGS in $(TARGET_SUBDIR)/newlib" ; \ + for flag in $(EXTRA_TARGET_FLAGS); do \ eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \ done; \ - echo "Doing maintainer-clean in time" ; \ - (cd time && \ + (cd $(TARGET_SUBDIR)/newlib && \ $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \ "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \ "RANLIB=$${RANLIB}" \ "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" \ - maintainer-clean) \ + TAGS) \ || exit 1 -.PHONY: maybe-maintainer-clean-uudecode maintainer-clean-uudecode -maybe-maintainer-clean-uudecode: +.PHONY: maybe-install-info-target-newlib install-info-target-newlib +maybe-install-info-target-newlib: -maintainer-clean-uudecode: - @[ -f ./uudecode/Makefile ] || exit 0; \ +install-info-target-newlib: \ + configure-target-newlib \ + info-target-newlib + @[ -f $(TARGET_SUBDIR)/newlib/Makefile ] || exit 0 ; \ r=`${PWD_COMMAND}`; export r; \ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ $(SET_LIB_PATH) \ - for flag in $(EXTRA_HOST_FLAGS); do \ + echo "Doing install-info in $(TARGET_SUBDIR)/newlib" ; \ + for flag in $(EXTRA_TARGET_FLAGS); do \ eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \ done; \ - echo "Doing maintainer-clean in uudecode" ; \ - (cd uudecode && \ + (cd $(TARGET_SUBDIR)/newlib && \ $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \ "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \ "RANLIB=$${RANLIB}" \ "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" \ - maintainer-clean) \ + install-info) \ || exit 1 -.PHONY: maybe-maintainer-clean-wdiff maintainer-clean-wdiff -maybe-maintainer-clean-wdiff: +.PHONY: maybe-installcheck-target-newlib installcheck-target-newlib +maybe-installcheck-target-newlib: -maintainer-clean-wdiff: - @[ -f ./wdiff/Makefile ] || exit 0; \ +installcheck-target-newlib: \ + configure-target-newlib + @[ -f $(TARGET_SUBDIR)/newlib/Makefile ] || exit 0 ; \ r=`${PWD_COMMAND}`; export r; \ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ $(SET_LIB_PATH) \ - for flag in $(EXTRA_HOST_FLAGS); do \ + echo "Doing installcheck in $(TARGET_SUBDIR)/newlib" ; \ + for flag in $(EXTRA_TARGET_FLAGS); do \ eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \ done; \ - echo "Doing maintainer-clean in wdiff" ; \ - (cd wdiff && \ + (cd $(TARGET_SUBDIR)/newlib && \ $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \ "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \ "RANLIB=$${RANLIB}" \ "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" \ - maintainer-clean) \ + installcheck) \ || exit 1 -.PHONY: maybe-maintainer-clean-zip maintainer-clean-zip -maybe-maintainer-clean-zip: +.PHONY: maybe-mostlyclean-target-newlib mostlyclean-target-newlib +maybe-mostlyclean-target-newlib: -maintainer-clean-zip: - @[ -f ./zip/Makefile ] || exit 0; \ +mostlyclean-target-newlib: + @[ -f $(TARGET_SUBDIR)/newlib/Makefile ] || exit 0 ; \ r=`${PWD_COMMAND}`; export r; \ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ $(SET_LIB_PATH) \ - for flag in $(EXTRA_HOST_FLAGS); do \ + echo "Doing mostlyclean in $(TARGET_SUBDIR)/newlib" ; \ + for flag in $(EXTRA_TARGET_FLAGS); do \ eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \ done; \ - echo "Doing maintainer-clean in zip" ; \ - (cd zip && \ + (cd $(TARGET_SUBDIR)/newlib && \ $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \ "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \ "RANLIB=$${RANLIB}" \ "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" \ - maintainer-clean) \ + mostlyclean) \ || exit 1 -.PHONY: maybe-maintainer-clean-zlib maintainer-clean-zlib -maybe-maintainer-clean-zlib: +.PHONY: maybe-clean-target-newlib clean-target-newlib +maybe-clean-target-newlib: -maintainer-clean-zlib: - @[ -f ./zlib/Makefile ] || exit 0; \ +clean-target-newlib: + @[ -f $(TARGET_SUBDIR)/newlib/Makefile ] || exit 0 ; \ r=`${PWD_COMMAND}`; export r; \ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ $(SET_LIB_PATH) \ - for flag in $(EXTRA_HOST_FLAGS); do \ + echo "Doing clean in $(TARGET_SUBDIR)/newlib" ; \ + for flag in $(EXTRA_TARGET_FLAGS); do \ eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \ done; \ - echo "Doing maintainer-clean in zlib" ; \ - (cd zlib && \ + (cd $(TARGET_SUBDIR)/newlib && \ $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \ "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \ "RANLIB=$${RANLIB}" \ "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" \ - maintainer-clean) \ + clean) \ || exit 1 -.PHONY: maybe-maintainer-clean-gdb maintainer-clean-gdb -maybe-maintainer-clean-gdb: +.PHONY: maybe-distclean-target-newlib distclean-target-newlib +maybe-distclean-target-newlib: -maintainer-clean-gdb: - @[ -f ./gdb/Makefile ] || exit 0; \ +distclean-target-newlib: + @[ -f $(TARGET_SUBDIR)/newlib/Makefile ] || exit 0 ; \ r=`${PWD_COMMAND}`; export r; \ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ $(SET_LIB_PATH) \ - for flag in $(EXTRA_HOST_FLAGS); do \ + echo "Doing distclean in $(TARGET_SUBDIR)/newlib" ; \ + for flag in $(EXTRA_TARGET_FLAGS); do \ eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \ done; \ - echo "Doing maintainer-clean in gdb" ; \ - (cd gdb && \ + (cd $(TARGET_SUBDIR)/newlib && \ $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \ "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \ "RANLIB=$${RANLIB}" \ "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" \ - maintainer-clean) \ + distclean) \ || exit 1 -.PHONY: maybe-maintainer-clean-expect maintainer-clean-expect -maybe-maintainer-clean-expect: +.PHONY: maybe-maintainer-clean-target-newlib maintainer-clean-target-newlib +maybe-maintainer-clean-target-newlib: -maintainer-clean-expect: - @[ -f ./expect/Makefile ] || exit 0; \ +maintainer-clean-target-newlib: + @[ -f $(TARGET_SUBDIR)/newlib/Makefile ] || exit 0 ; \ r=`${PWD_COMMAND}`; export r; \ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ $(SET_LIB_PATH) \ - for flag in $(EXTRA_HOST_FLAGS); do \ + echo "Doing maintainer-clean in $(TARGET_SUBDIR)/newlib" ; \ + for flag in $(EXTRA_TARGET_FLAGS); do \ eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \ done; \ - echo "Doing maintainer-clean in expect" ; \ - (cd expect && \ + (cd $(TARGET_SUBDIR)/newlib && \ $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \ "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \ "RANLIB=$${RANLIB}" \ @@ -16989,151 +19400,209 @@ maintainer-clean-expect: || exit 1 -.PHONY: maybe-maintainer-clean-guile maintainer-clean-guile -maybe-maintainer-clean-guile: -maintainer-clean-guile: - @[ -f ./guile/Makefile ] || exit 0; \ +.PHONY: configure-target-libf2c maybe-configure-target-libf2c +maybe-configure-target-libf2c: + +# There's only one multilib.out. Cleverer subdirs shouldn't need it copied. +$(TARGET_SUBDIR)/libf2c/multilib.out: multilib.out + $(SHELL) $(srcdir)/mkinstalldirs $(TARGET_SUBDIR)/libf2c ; \ + rm -f $(TARGET_SUBDIR)/libf2c/Makefile || : ; \ + cp multilib.out $(TARGET_SUBDIR)/libf2c/multilib.out + +configure-target-libf2c: $(TARGET_SUBDIR)/libf2c/multilib.out + @test ! -f $(TARGET_SUBDIR)/libf2c/Makefile || exit 0; \ + $(SHELL) $(srcdir)/mkinstalldirs $(TARGET_SUBDIR)/libf2c ; \ r=`${PWD_COMMAND}`; export r; \ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ $(SET_LIB_PATH) \ - for flag in $(EXTRA_HOST_FLAGS); do \ - eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \ - done; \ - echo "Doing maintainer-clean in guile" ; \ - (cd guile && \ - $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \ - "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \ - "RANLIB=$${RANLIB}" \ - "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" \ - maintainer-clean) \ + AR="$(AR_FOR_TARGET)"; export AR; \ + AS="$(AS_FOR_TARGET)"; export AS; \ + CC="$(CC_FOR_TARGET)"; export CC; \ + CFLAGS="$(CFLAGS_FOR_TARGET)"; export CFLAGS; \ + CONFIG_SHELL="$(SHELL)"; export CONFIG_SHELL; \ + CPPFLAGS="$(CFLAGS_FOR_TARGET)"; export CPPFLAGS; \ + CXX="$(CXX_FOR_TARGET)"; export CXX; \ + CXXFLAGS="$(CXXFLAGS_FOR_TARGET)"; export CXXFLAGS; \ + GCJ="$(GCJ_FOR_TARGET)"; export GCJ; \ + DLLTOOL="$(DLLTOOL_FOR_TARGET)"; export DLLTOOL; \ + LD="$(LD_FOR_TARGET)"; export LD; \ + LDFLAGS="$(LDFLAGS_FOR_TARGET)"; export LDFLAGS; \ + NM="$(NM_FOR_TARGET)"; export NM; \ + RANLIB="$(RANLIB_FOR_TARGET)"; export RANLIB; \ + WINDRES="$(WINDRES_FOR_TARGET)"; export WINDRES; \ + echo Configuring in $(TARGET_SUBDIR)/libf2c; \ + cd "$(TARGET_SUBDIR)/libf2c" || exit 1; \ + case $(srcdir) in \ + /* | [A-Za-z]:[\\/]*) \ + topdir=$(srcdir) ;; \ + *) \ + case "$(TARGET_SUBDIR)" in \ + .) topdir="../$(srcdir)" ;; \ + *) topdir="../../$(srcdir)" ;; \ + esac ;; \ + esac; \ + srcdiroption="--srcdir=$${topdir}/libf2c"; \ + libsrcdir="$$s/libf2c"; \ + rm -f no-such-file || : ; \ + CONFIG_SITE=no-such-file $(SHELL) $${libsrcdir}/configure \ + $(TARGET_CONFIGARGS) $${srcdiroption} \ + --with-target-subdir="$(TARGET_SUBDIR)" \ || exit 1 +.PHONY: all-target-libf2c maybe-all-target-libf2c +maybe-all-target-libf2c: +all-target-libf2c: configure-target-libf2c + @r=`${PWD_COMMAND}`; export r; \ + s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ + $(SET_LIB_PATH) \ + (cd $(TARGET_SUBDIR)/libf2c && \ + $(MAKE) $(TARGET_FLAGS_TO_PASS) all) + +.PHONY: check-target-libf2c maybe-check-target-libf2c +maybe-check-target-libf2c: -.PHONY: maybe-maintainer-clean-tk maintainer-clean-tk -maybe-maintainer-clean-tk: +check-target-libf2c: + @r=`${PWD_COMMAND}`; export r; \ + s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ + $(SET_LIB_PATH) \ + (cd $(TARGET_SUBDIR)/libf2c && \ + $(MAKE) $(TARGET_FLAGS_TO_PASS) check) -maintainer-clean-tk: - @[ -f ./tk/Makefile ] || exit 0; \ + +.PHONY: install-target-libf2c maybe-install-target-libf2c +maybe-install-target-libf2c: + +install-target-libf2c: installdirs + @r=`${PWD_COMMAND}`; export r; \ + s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ + $(SET_LIB_PATH) \ + (cd $(TARGET_SUBDIR)/libf2c && \ + $(MAKE) $(TARGET_FLAGS_TO_PASS) install) + + +# Other targets (info, dvi, etc.) + +.PHONY: maybe-info-target-libf2c info-target-libf2c +maybe-info-target-libf2c: + +info-target-libf2c: \ + configure-target-libf2c + @[ -f $(TARGET_SUBDIR)/libf2c/Makefile ] || exit 0 ; \ r=`${PWD_COMMAND}`; export r; \ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ $(SET_LIB_PATH) \ - for flag in $(EXTRA_HOST_FLAGS); do \ + echo "Doing info in $(TARGET_SUBDIR)/libf2c" ; \ + for flag in $(EXTRA_TARGET_FLAGS); do \ eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \ done; \ - echo "Doing maintainer-clean in tk" ; \ - (cd tk && \ + (cd $(TARGET_SUBDIR)/libf2c && \ $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \ "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \ "RANLIB=$${RANLIB}" \ "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" \ - maintainer-clean) \ + info) \ || exit 1 -.PHONY: maybe-maintainer-clean-tix maintainer-clean-tix -maybe-maintainer-clean-tix: +.PHONY: maybe-dvi-target-libf2c dvi-target-libf2c +maybe-dvi-target-libf2c: -maintainer-clean-tix: - @[ -f ./tix/Makefile ] || exit 0; \ +dvi-target-libf2c: \ + configure-target-libf2c + @[ -f $(TARGET_SUBDIR)/libf2c/Makefile ] || exit 0 ; \ r=`${PWD_COMMAND}`; export r; \ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ $(SET_LIB_PATH) \ - for flag in $(EXTRA_HOST_FLAGS); do \ + echo "Doing dvi in $(TARGET_SUBDIR)/libf2c" ; \ + for flag in $(EXTRA_TARGET_FLAGS); do \ eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \ done; \ - echo "Doing maintainer-clean in tix" ; \ - (cd tix && \ + (cd $(TARGET_SUBDIR)/libf2c && \ $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \ "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \ "RANLIB=$${RANLIB}" \ "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" \ - maintainer-clean) \ + dvi) \ || exit 1 -.PHONY: maybe-maintainer-clean-libtermcap maintainer-clean-libtermcap -maybe-maintainer-clean-libtermcap: - -# libtermcap doesn't support maintainer-clean. -maintainer-clean-libtermcap: - - -.PHONY: maybe-maintainer-clean-utils maintainer-clean-utils -maybe-maintainer-clean-utils: +.PHONY: maybe-TAGS-target-libf2c TAGS-target-libf2c +maybe-TAGS-target-libf2c: -maintainer-clean-utils: - @[ -f ./utils/Makefile ] || exit 0; \ +TAGS-target-libf2c: \ + configure-target-libf2c + @[ -f $(TARGET_SUBDIR)/libf2c/Makefile ] || exit 0 ; \ r=`${PWD_COMMAND}`; export r; \ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ $(SET_LIB_PATH) \ - for flag in $(EXTRA_HOST_FLAGS); do \ + echo "Doing TAGS in $(TARGET_SUBDIR)/libf2c" ; \ + for flag in $(EXTRA_TARGET_FLAGS); do \ eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \ done; \ - echo "Doing maintainer-clean in utils" ; \ - (cd utils && \ + (cd $(TARGET_SUBDIR)/libf2c && \ $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \ "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \ "RANLIB=$${RANLIB}" \ "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" \ - maintainer-clean) \ + TAGS) \ || exit 1 +.PHONY: maybe-install-info-target-libf2c install-info-target-libf2c +maybe-install-info-target-libf2c: -# Target modules. - -.PHONY: maybe-maintainer-clean-target-libstdc++-v3 maintainer-clean-target-libstdc++-v3 -maybe-maintainer-clean-target-libstdc++-v3: - -maintainer-clean-target-libstdc++-v3: - @[ -f $(TARGET_SUBDIR)/libstdc++-v3/Makefile ] || exit 0 ; \ +install-info-target-libf2c: \ + configure-target-libf2c \ + info-target-libf2c + @[ -f $(TARGET_SUBDIR)/libf2c/Makefile ] || exit 0 ; \ r=`${PWD_COMMAND}`; export r; \ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ $(SET_LIB_PATH) \ - echo "Doing maintainer-clean in $(TARGET_SUBDIR)/libstdc++-v3" ; \ + echo "Doing install-info in $(TARGET_SUBDIR)/libf2c" ; \ for flag in $(EXTRA_TARGET_FLAGS); do \ eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \ done; \ - (cd $(TARGET_SUBDIR)/libstdc++-v3 && \ + (cd $(TARGET_SUBDIR)/libf2c && \ $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \ "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \ "RANLIB=$${RANLIB}" \ "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" \ - maintainer-clean) \ + install-info) \ || exit 1 -.PHONY: maybe-maintainer-clean-target-newlib maintainer-clean-target-newlib -maybe-maintainer-clean-target-newlib: +.PHONY: maybe-installcheck-target-libf2c installcheck-target-libf2c +maybe-installcheck-target-libf2c: -maintainer-clean-target-newlib: - @[ -f $(TARGET_SUBDIR)/newlib/Makefile ] || exit 0 ; \ +installcheck-target-libf2c: \ + configure-target-libf2c + @[ -f $(TARGET_SUBDIR)/libf2c/Makefile ] || exit 0 ; \ r=`${PWD_COMMAND}`; export r; \ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ $(SET_LIB_PATH) \ - echo "Doing maintainer-clean in $(TARGET_SUBDIR)/newlib" ; \ + echo "Doing installcheck in $(TARGET_SUBDIR)/libf2c" ; \ for flag in $(EXTRA_TARGET_FLAGS); do \ eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \ done; \ - (cd $(TARGET_SUBDIR)/newlib && \ + (cd $(TARGET_SUBDIR)/libf2c && \ $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \ "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \ "RANLIB=$${RANLIB}" \ "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" \ - maintainer-clean) \ + installcheck) \ || exit 1 -.PHONY: maybe-maintainer-clean-target-libf2c maintainer-clean-target-libf2c -maybe-maintainer-clean-target-libf2c: +.PHONY: maybe-mostlyclean-target-libf2c mostlyclean-target-libf2c +maybe-mostlyclean-target-libf2c: -maintainer-clean-target-libf2c: +mostlyclean-target-libf2c: @[ -f $(TARGET_SUBDIR)/libf2c/Makefile ] || exit 0 ; \ r=`${PWD_COMMAND}`; export r; \ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ $(SET_LIB_PATH) \ - echo "Doing maintainer-clean in $(TARGET_SUBDIR)/libf2c" ; \ + echo "Doing mostlyclean in $(TARGET_SUBDIR)/libf2c" ; \ for flag in $(EXTRA_TARGET_FLAGS); do \ eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \ done; \ @@ -17142,72 +19611,65 @@ maintainer-clean-target-libf2c: "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \ "RANLIB=$${RANLIB}" \ "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" \ - maintainer-clean) \ + mostlyclean) \ || exit 1 -.PHONY: maybe-maintainer-clean-target-libobjc maintainer-clean-target-libobjc -maybe-maintainer-clean-target-libobjc: +.PHONY: maybe-clean-target-libf2c clean-target-libf2c +maybe-clean-target-libf2c: -maintainer-clean-target-libobjc: - @[ -f $(TARGET_SUBDIR)/libobjc/Makefile ] || exit 0 ; \ +clean-target-libf2c: + @[ -f $(TARGET_SUBDIR)/libf2c/Makefile ] || exit 0 ; \ r=`${PWD_COMMAND}`; export r; \ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ $(SET_LIB_PATH) \ - echo "Doing maintainer-clean in $(TARGET_SUBDIR)/libobjc" ; \ + echo "Doing clean in $(TARGET_SUBDIR)/libf2c" ; \ for flag in $(EXTRA_TARGET_FLAGS); do \ eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \ done; \ - (cd $(TARGET_SUBDIR)/libobjc && \ + (cd $(TARGET_SUBDIR)/libf2c && \ $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \ "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \ "RANLIB=$${RANLIB}" \ "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" \ - maintainer-clean) \ + clean) \ || exit 1 -.PHONY: maybe-maintainer-clean-target-libtermcap maintainer-clean-target-libtermcap -maybe-maintainer-clean-target-libtermcap: - -# libtermcap doesn't support maintainer-clean. -maintainer-clean-target-libtermcap: - - -.PHONY: maybe-maintainer-clean-target-winsup maintainer-clean-target-winsup -maybe-maintainer-clean-target-winsup: +.PHONY: maybe-distclean-target-libf2c distclean-target-libf2c +maybe-distclean-target-libf2c: -maintainer-clean-target-winsup: - @[ -f $(TARGET_SUBDIR)/winsup/Makefile ] || exit 0 ; \ +distclean-target-libf2c: + @[ -f $(TARGET_SUBDIR)/libf2c/Makefile ] || exit 0 ; \ r=`${PWD_COMMAND}`; export r; \ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ $(SET_LIB_PATH) \ - echo "Doing maintainer-clean in $(TARGET_SUBDIR)/winsup" ; \ + echo "Doing distclean in $(TARGET_SUBDIR)/libf2c" ; \ for flag in $(EXTRA_TARGET_FLAGS); do \ eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \ done; \ - (cd $(TARGET_SUBDIR)/winsup && \ + (cd $(TARGET_SUBDIR)/libf2c && \ $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \ "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \ "RANLIB=$${RANLIB}" \ "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" \ - maintainer-clean) \ + distclean) \ || exit 1 -.PHONY: maybe-maintainer-clean-target-libgloss maintainer-clean-target-libgloss -maybe-maintainer-clean-target-libgloss: +.PHONY: maybe-maintainer-clean-target-libf2c maintainer-clean-target-libf2c +maybe-maintainer-clean-target-libf2c: -maintainer-clean-target-libgloss: - @[ -f $(TARGET_SUBDIR)/libgloss/Makefile ] || exit 0 ; \ +maintainer-clean-target-libf2c: + @[ -f $(TARGET_SUBDIR)/libf2c/Makefile ] || exit 0 ; \ r=`${PWD_COMMAND}`; export r; \ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ $(SET_LIB_PATH) \ - echo "Doing maintainer-clean in $(TARGET_SUBDIR)/libgloss" ; \ + echo "Doing maintainer-clean in $(TARGET_SUBDIR)/libf2c" ; \ for flag in $(EXTRA_TARGET_FLAGS); do \ eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \ done; \ - (cd $(TARGET_SUBDIR)/libgloss && \ + (cd $(TARGET_SUBDIR)/libf2c && \ $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \ "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \ "RANLIB=$${RANLIB}" \ @@ -17216,208 +19678,276 @@ maintainer-clean-target-libgloss: || exit 1 -.PHONY: maybe-maintainer-clean-target-libiberty maintainer-clean-target-libiberty -maybe-maintainer-clean-target-libiberty: -maintainer-clean-target-libiberty: - @[ -f $(TARGET_SUBDIR)/libiberty/Makefile ] || exit 0 ; \ +.PHONY: configure-target-libobjc maybe-configure-target-libobjc +maybe-configure-target-libobjc: + +# There's only one multilib.out. Cleverer subdirs shouldn't need it copied. +$(TARGET_SUBDIR)/libobjc/multilib.out: multilib.out + $(SHELL) $(srcdir)/mkinstalldirs $(TARGET_SUBDIR)/libobjc ; \ + rm -f $(TARGET_SUBDIR)/libobjc/Makefile || : ; \ + cp multilib.out $(TARGET_SUBDIR)/libobjc/multilib.out + +configure-target-libobjc: $(TARGET_SUBDIR)/libobjc/multilib.out + @test ! -f $(TARGET_SUBDIR)/libobjc/Makefile || exit 0; \ + $(SHELL) $(srcdir)/mkinstalldirs $(TARGET_SUBDIR)/libobjc ; \ r=`${PWD_COMMAND}`; export r; \ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ $(SET_LIB_PATH) \ - echo "Doing maintainer-clean in $(TARGET_SUBDIR)/libiberty" ; \ - for flag in $(EXTRA_TARGET_FLAGS); do \ - eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \ - done; \ - (cd $(TARGET_SUBDIR)/libiberty && \ - $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \ - "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \ - "RANLIB=$${RANLIB}" \ - "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" \ - maintainer-clean) \ + AR="$(AR_FOR_TARGET)"; export AR; \ + AS="$(AS_FOR_TARGET)"; export AS; \ + CC="$(CC_FOR_TARGET)"; export CC; \ + CFLAGS="$(CFLAGS_FOR_TARGET)"; export CFLAGS; \ + CONFIG_SHELL="$(SHELL)"; export CONFIG_SHELL; \ + CPPFLAGS="$(CFLAGS_FOR_TARGET)"; export CPPFLAGS; \ + CXX="$(CXX_FOR_TARGET)"; export CXX; \ + CXXFLAGS="$(CXXFLAGS_FOR_TARGET)"; export CXXFLAGS; \ + GCJ="$(GCJ_FOR_TARGET)"; export GCJ; \ + DLLTOOL="$(DLLTOOL_FOR_TARGET)"; export DLLTOOL; \ + LD="$(LD_FOR_TARGET)"; export LD; \ + LDFLAGS="$(LDFLAGS_FOR_TARGET)"; export LDFLAGS; \ + NM="$(NM_FOR_TARGET)"; export NM; \ + RANLIB="$(RANLIB_FOR_TARGET)"; export RANLIB; \ + WINDRES="$(WINDRES_FOR_TARGET)"; export WINDRES; \ + echo Configuring in $(TARGET_SUBDIR)/libobjc; \ + cd "$(TARGET_SUBDIR)/libobjc" || exit 1; \ + case $(srcdir) in \ + /* | [A-Za-z]:[\\/]*) \ + topdir=$(srcdir) ;; \ + *) \ + case "$(TARGET_SUBDIR)" in \ + .) topdir="../$(srcdir)" ;; \ + *) topdir="../../$(srcdir)" ;; \ + esac ;; \ + esac; \ + srcdiroption="--srcdir=$${topdir}/libobjc"; \ + libsrcdir="$$s/libobjc"; \ + rm -f no-such-file || : ; \ + CONFIG_SITE=no-such-file $(SHELL) $${libsrcdir}/configure \ + $(TARGET_CONFIGARGS) $${srcdiroption} \ + --with-target-subdir="$(TARGET_SUBDIR)" \ || exit 1 +.PHONY: all-target-libobjc maybe-all-target-libobjc +maybe-all-target-libobjc: +all-target-libobjc: configure-target-libobjc + @r=`${PWD_COMMAND}`; export r; \ + s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ + $(SET_LIB_PATH) \ + (cd $(TARGET_SUBDIR)/libobjc && \ + $(MAKE) $(TARGET_FLAGS_TO_PASS) all) + +.PHONY: check-target-libobjc maybe-check-target-libobjc +maybe-check-target-libobjc: -.PHONY: maybe-maintainer-clean-target-gperf maintainer-clean-target-gperf -maybe-maintainer-clean-target-gperf: +check-target-libobjc: + @r=`${PWD_COMMAND}`; export r; \ + s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ + $(SET_LIB_PATH) \ + (cd $(TARGET_SUBDIR)/libobjc && \ + $(MAKE) $(TARGET_FLAGS_TO_PASS) check) -maintainer-clean-target-gperf: - @[ -f $(TARGET_SUBDIR)/gperf/Makefile ] || exit 0 ; \ + +.PHONY: install-target-libobjc maybe-install-target-libobjc +maybe-install-target-libobjc: + +install-target-libobjc: installdirs + @r=`${PWD_COMMAND}`; export r; \ + s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ + $(SET_LIB_PATH) \ + (cd $(TARGET_SUBDIR)/libobjc && \ + $(MAKE) $(TARGET_FLAGS_TO_PASS) install) + + +# Other targets (info, dvi, etc.) + +.PHONY: maybe-info-target-libobjc info-target-libobjc +maybe-info-target-libobjc: + +info-target-libobjc: \ + configure-target-libobjc + @[ -f $(TARGET_SUBDIR)/libobjc/Makefile ] || exit 0 ; \ r=`${PWD_COMMAND}`; export r; \ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ $(SET_LIB_PATH) \ - echo "Doing maintainer-clean in $(TARGET_SUBDIR)/gperf" ; \ + echo "Doing info in $(TARGET_SUBDIR)/libobjc" ; \ for flag in $(EXTRA_TARGET_FLAGS); do \ eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \ done; \ - (cd $(TARGET_SUBDIR)/gperf && \ + (cd $(TARGET_SUBDIR)/libobjc && \ $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \ "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \ "RANLIB=$${RANLIB}" \ "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" \ - maintainer-clean) \ + info) \ || exit 1 -.PHONY: maybe-maintainer-clean-target-examples maintainer-clean-target-examples -maybe-maintainer-clean-target-examples: +.PHONY: maybe-dvi-target-libobjc dvi-target-libobjc +maybe-dvi-target-libobjc: -maintainer-clean-target-examples: - @[ -f $(TARGET_SUBDIR)/examples/Makefile ] || exit 0 ; \ +dvi-target-libobjc: \ + configure-target-libobjc + @[ -f $(TARGET_SUBDIR)/libobjc/Makefile ] || exit 0 ; \ r=`${PWD_COMMAND}`; export r; \ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ $(SET_LIB_PATH) \ - echo "Doing maintainer-clean in $(TARGET_SUBDIR)/examples" ; \ + echo "Doing dvi in $(TARGET_SUBDIR)/libobjc" ; \ for flag in $(EXTRA_TARGET_FLAGS); do \ eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \ done; \ - (cd $(TARGET_SUBDIR)/examples && \ + (cd $(TARGET_SUBDIR)/libobjc && \ $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \ "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \ "RANLIB=$${RANLIB}" \ "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" \ - maintainer-clean) \ + dvi) \ || exit 1 -.PHONY: maybe-maintainer-clean-target-libffi maintainer-clean-target-libffi -maybe-maintainer-clean-target-libffi: +.PHONY: maybe-TAGS-target-libobjc TAGS-target-libobjc +maybe-TAGS-target-libobjc: -maintainer-clean-target-libffi: - @[ -f $(TARGET_SUBDIR)/libffi/Makefile ] || exit 0 ; \ +TAGS-target-libobjc: \ + configure-target-libobjc + @[ -f $(TARGET_SUBDIR)/libobjc/Makefile ] || exit 0 ; \ r=`${PWD_COMMAND}`; export r; \ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ $(SET_LIB_PATH) \ - echo "Doing maintainer-clean in $(TARGET_SUBDIR)/libffi" ; \ + echo "Doing TAGS in $(TARGET_SUBDIR)/libobjc" ; \ for flag in $(EXTRA_TARGET_FLAGS); do \ eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \ done; \ - (cd $(TARGET_SUBDIR)/libffi && \ + (cd $(TARGET_SUBDIR)/libobjc && \ $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \ "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \ "RANLIB=$${RANLIB}" \ "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" \ - maintainer-clean) \ + TAGS) \ || exit 1 -.PHONY: maybe-maintainer-clean-target-libjava maintainer-clean-target-libjava -maybe-maintainer-clean-target-libjava: +.PHONY: maybe-install-info-target-libobjc install-info-target-libobjc +maybe-install-info-target-libobjc: -maintainer-clean-target-libjava: - @[ -f $(TARGET_SUBDIR)/libjava/Makefile ] || exit 0 ; \ +install-info-target-libobjc: \ + configure-target-libobjc \ + info-target-libobjc + @[ -f $(TARGET_SUBDIR)/libobjc/Makefile ] || exit 0 ; \ r=`${PWD_COMMAND}`; export r; \ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ $(SET_LIB_PATH) \ - echo "Doing maintainer-clean in $(TARGET_SUBDIR)/libjava" ; \ + echo "Doing install-info in $(TARGET_SUBDIR)/libobjc" ; \ for flag in $(EXTRA_TARGET_FLAGS); do \ eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \ done; \ - (cd $(TARGET_SUBDIR)/libjava && \ + (cd $(TARGET_SUBDIR)/libobjc && \ $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \ "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \ "RANLIB=$${RANLIB}" \ "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" \ - maintainer-clean) \ + install-info) \ || exit 1 -.PHONY: maybe-maintainer-clean-target-zlib maintainer-clean-target-zlib -maybe-maintainer-clean-target-zlib: +.PHONY: maybe-installcheck-target-libobjc installcheck-target-libobjc +maybe-installcheck-target-libobjc: -maintainer-clean-target-zlib: - @[ -f $(TARGET_SUBDIR)/zlib/Makefile ] || exit 0 ; \ +installcheck-target-libobjc: \ + configure-target-libobjc + @[ -f $(TARGET_SUBDIR)/libobjc/Makefile ] || exit 0 ; \ r=`${PWD_COMMAND}`; export r; \ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ $(SET_LIB_PATH) \ - echo "Doing maintainer-clean in $(TARGET_SUBDIR)/zlib" ; \ + echo "Doing installcheck in $(TARGET_SUBDIR)/libobjc" ; \ for flag in $(EXTRA_TARGET_FLAGS); do \ eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \ done; \ - (cd $(TARGET_SUBDIR)/zlib && \ + (cd $(TARGET_SUBDIR)/libobjc && \ $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \ "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \ "RANLIB=$${RANLIB}" \ "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" \ - maintainer-clean) \ + installcheck) \ || exit 1 -.PHONY: maybe-maintainer-clean-target-boehm-gc maintainer-clean-target-boehm-gc -maybe-maintainer-clean-target-boehm-gc: +.PHONY: maybe-mostlyclean-target-libobjc mostlyclean-target-libobjc +maybe-mostlyclean-target-libobjc: -maintainer-clean-target-boehm-gc: - @[ -f $(TARGET_SUBDIR)/boehm-gc/Makefile ] || exit 0 ; \ +mostlyclean-target-libobjc: + @[ -f $(TARGET_SUBDIR)/libobjc/Makefile ] || exit 0 ; \ r=`${PWD_COMMAND}`; export r; \ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ $(SET_LIB_PATH) \ - echo "Doing maintainer-clean in $(TARGET_SUBDIR)/boehm-gc" ; \ + echo "Doing mostlyclean in $(TARGET_SUBDIR)/libobjc" ; \ for flag in $(EXTRA_TARGET_FLAGS); do \ eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \ done; \ - (cd $(TARGET_SUBDIR)/boehm-gc && \ + (cd $(TARGET_SUBDIR)/libobjc && \ $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \ "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \ "RANLIB=$${RANLIB}" \ "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" \ - maintainer-clean) \ + mostlyclean) \ || exit 1 -.PHONY: maybe-maintainer-clean-target-qthreads maintainer-clean-target-qthreads -maybe-maintainer-clean-target-qthreads: +.PHONY: maybe-clean-target-libobjc clean-target-libobjc +maybe-clean-target-libobjc: -maintainer-clean-target-qthreads: - @[ -f $(TARGET_SUBDIR)/qthreads/Makefile ] || exit 0 ; \ +clean-target-libobjc: + @[ -f $(TARGET_SUBDIR)/libobjc/Makefile ] || exit 0 ; \ r=`${PWD_COMMAND}`; export r; \ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ $(SET_LIB_PATH) \ - echo "Doing maintainer-clean in $(TARGET_SUBDIR)/qthreads" ; \ + echo "Doing clean in $(TARGET_SUBDIR)/libobjc" ; \ for flag in $(EXTRA_TARGET_FLAGS); do \ eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \ done; \ - (cd $(TARGET_SUBDIR)/qthreads && \ + (cd $(TARGET_SUBDIR)/libobjc && \ $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \ "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \ "RANLIB=$${RANLIB}" \ "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" \ - maintainer-clean) \ + clean) \ || exit 1 -.PHONY: maybe-maintainer-clean-target-rda maintainer-clean-target-rda -maybe-maintainer-clean-target-rda: +.PHONY: maybe-distclean-target-libobjc distclean-target-libobjc +maybe-distclean-target-libobjc: -maintainer-clean-target-rda: - @[ -f $(TARGET_SUBDIR)/rda/Makefile ] || exit 0 ; \ +distclean-target-libobjc: + @[ -f $(TARGET_SUBDIR)/libobjc/Makefile ] || exit 0 ; \ r=`${PWD_COMMAND}`; export r; \ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ $(SET_LIB_PATH) \ - echo "Doing maintainer-clean in $(TARGET_SUBDIR)/rda" ; \ + echo "Doing distclean in $(TARGET_SUBDIR)/libobjc" ; \ for flag in $(EXTRA_TARGET_FLAGS); do \ eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \ done; \ - (cd $(TARGET_SUBDIR)/rda && \ + (cd $(TARGET_SUBDIR)/libobjc && \ $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \ "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \ "RANLIB=$${RANLIB}" \ "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" \ - maintainer-clean) \ + distclean) \ || exit 1 -.PHONY: maybe-maintainer-clean-target-libada maintainer-clean-target-libada -maybe-maintainer-clean-target-libada: +.PHONY: maybe-maintainer-clean-target-libobjc maintainer-clean-target-libobjc +maybe-maintainer-clean-target-libobjc: -maintainer-clean-target-libada: - @[ -f $(TARGET_SUBDIR)/libada/Makefile ] || exit 0 ; \ +maintainer-clean-target-libobjc: + @[ -f $(TARGET_SUBDIR)/libobjc/Makefile ] || exit 0 ; \ r=`${PWD_COMMAND}`; export r; \ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ $(SET_LIB_PATH) \ - echo "Doing maintainer-clean in $(TARGET_SUBDIR)/libada" ; \ + echo "Doing maintainer-clean in $(TARGET_SUBDIR)/libobjc" ; \ for flag in $(EXTRA_TARGET_FLAGS); do \ eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \ done; \ - (cd $(TARGET_SUBDIR)/libada && \ + (cd $(TARGET_SUBDIR)/libobjc && \ $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \ "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \ "RANLIB=$${RANLIB}" \ @@ -17427,419 +19957,50 @@ maintainer-clean-target-libada: +.PHONY: configure-target-libtermcap maybe-configure-target-libtermcap +maybe-configure-target-libtermcap: -# Here are the targets which correspond to the do-X targets. - -.PHONY: info installcheck dvi install-info -.PHONY: clean distclean mostlyclean maintainer-clean realclean -.PHONY: local-clean local-distclean local-maintainer-clean -info: do-info -installcheck: do-installcheck -dvi: do-dvi - -# Make sure makeinfo is built before we do a `make info', if we're -# in fact building texinfo. -do-info: maybe-all-texinfo - -install-info: do-install-info dir.info - s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ - if [ -f dir.info ] ; then \ - $(INSTALL_DATA) dir.info $(DESTDIR)$(infodir)/dir.info ; \ - else true ; fi - -local-clean: - -rm -f *.a TEMP errs core *.o *~ \#* TAGS *.E *.log - -local-distclean: - -rm -f Makefile config.status config.cache mh-frag mt-frag - -rm -f multilib.out multilib.tmp maybedep.tmp serdep.tmp - -if [ "$(TARGET_SUBDIR)" != "." ]; then \ - rm -rf $(TARGET_SUBDIR); \ - else true; fi - -rm -rf $(BUILD_SUBDIR) - -rm -f texinfo/po/Makefile texinfo/po/Makefile.in texinfo/info/Makefile - -rm -f texinfo/doc/Makefile texinfo/po/POTFILES - -rmdir texinfo/doc texinfo/info texinfo/intl texinfo/lib 2>/dev/null - -rmdir texinfo/makeinfo texinfo/po texinfo/util 2>/dev/null - -rmdir fastjar gcc libiberty texinfo zlib 2>/dev/null - -local-maintainer-clean: - @echo "This command is intended for maintainers to use;" - @echo "it deletes files that may require special tools to rebuild." - -clean: do-clean local-clean -mostlyclean: do-mostlyclean local-clean -distclean: do-distclean local-clean local-distclean -maintainer-clean: local-maintainer-clean do-maintainer-clean local-clean -maintainer-clean: local-distclean -realclean: maintainer-clean - -# Extra dependency for clean-target, owing to the mixed nature of gcc -clean-target: clean-target-libgcc -clean-target-libgcc: - test ! -d gcc/libgcc || \ - (cd gcc/libgcc && find . -type d -print) | \ - while read d; do rm -f gcc/$$d/libgcc.a || : ; done - -rm -rf gcc/libgcc - -# Check target. - -.PHONY: check do-check -check: do-check - -# Only include modules actually being configured and built. -do-check: maybe-check-gcc \ - maybe-check-ash \ - maybe-check-autoconf \ - maybe-check-automake \ - maybe-check-bash \ - maybe-check-bfd \ - maybe-check-opcodes \ - maybe-check-binutils \ - maybe-check-bison \ - maybe-check-byacc \ - maybe-check-bzip2 \ - maybe-check-dejagnu \ - maybe-check-diff \ - maybe-check-dosutils \ - maybe-check-etc \ - maybe-check-fastjar \ - maybe-check-fileutils \ - maybe-check-findutils \ - maybe-check-find \ - maybe-check-flex \ - maybe-check-gas \ - maybe-check-gawk \ - maybe-check-gettext \ - maybe-check-gnuserv \ - maybe-check-gprof \ - maybe-check-gzip \ - maybe-check-hello \ - maybe-check-indent \ - maybe-check-intl \ - maybe-check-tcl \ - maybe-check-itcl \ - maybe-check-ld \ - maybe-check-libgui \ - maybe-check-libiberty \ - maybe-check-libtool \ - maybe-check-m4 \ - maybe-check-make \ - maybe-check-mmalloc \ - maybe-check-patch \ - maybe-check-perl \ - maybe-check-prms \ - maybe-check-rcs \ - maybe-check-readline \ - maybe-check-release \ - maybe-check-recode \ - maybe-check-sed \ - maybe-check-send-pr \ - maybe-check-shellutils \ - maybe-check-sid \ - maybe-check-sim \ - maybe-check-tar \ - maybe-check-texinfo \ - maybe-check-textutils \ - maybe-check-time \ - maybe-check-uudecode \ - maybe-check-wdiff \ - maybe-check-zip \ - maybe-check-zlib \ - maybe-check-gdb \ - maybe-check-expect \ - maybe-check-guile \ - maybe-check-tk \ - maybe-check-tix \ - maybe-check-libtermcap \ - maybe-check-utils \ - maybe-check-target-libstdc++-v3 \ - maybe-check-target-newlib \ - maybe-check-target-libf2c \ - maybe-check-target-libobjc \ - maybe-check-target-libtermcap \ - maybe-check-target-winsup \ - maybe-check-target-libgloss \ - maybe-check-target-libiberty \ - maybe-check-target-gperf \ - maybe-check-target-examples \ - maybe-check-target-libffi \ - maybe-check-target-libjava \ - maybe-check-target-zlib \ - maybe-check-target-boehm-gc \ - maybe-check-target-qthreads \ - maybe-check-target-rda \ - maybe-check-target-libada - -# Automated reporting of test results. - -warning.log: build.log - $(srcdir)/contrib/warn_summary build.log > $@ - -mail-report.log: - if test x'$(BOOT_CFLAGS)' != x''; then \ - BOOT_CFLAGS='$(BOOT_CFLAGS)'; export BOOT_CFLAGS; \ - fi; \ - $(srcdir)/contrib/test_summary -t >$@ - chmod +x $@ - echo If you really want to send e-mail, run ./$@ now - -mail-report-with-warnings.log: warning.log - if test x'$(BOOT_CFLAGS)' != x''; then \ - BOOT_CFLAGS='$(BOOT_CFLAGS)'; export BOOT_CFLAGS; \ - fi; \ - $(srcdir)/contrib/test_summary -t -i warning.log >$@ - chmod +x $@ - echo If you really want to send e-mail, run ./$@ now - -# Installation targets. - -.PHONY: install uninstall -install: installdirs install-host install-target - -.PHONY: install-host-nogcc -install-host-nogcc: \ - maybe-install-ash \ - maybe-install-autoconf \ - maybe-install-automake \ - maybe-install-bash \ - maybe-install-bfd \ - maybe-install-opcodes \ - maybe-install-binutils \ - maybe-install-bison \ - maybe-install-byacc \ - maybe-install-bzip2 \ - maybe-install-dejagnu \ - maybe-install-diff \ - maybe-install-dosutils \ - maybe-install-etc \ - maybe-install-fastjar \ - maybe-install-fileutils \ - maybe-install-findutils \ - maybe-install-find \ - maybe-install-flex \ - maybe-install-gas \ - maybe-install-gawk \ - maybe-install-gettext \ - maybe-install-gnuserv \ - maybe-install-gprof \ - maybe-install-gzip \ - maybe-install-hello \ - maybe-install-indent \ - maybe-install-intl \ - maybe-install-tcl \ - maybe-install-itcl \ - maybe-install-ld \ - maybe-install-libgui \ - maybe-install-libiberty \ - maybe-install-libtool \ - maybe-install-m4 \ - maybe-install-make \ - maybe-install-mmalloc \ - maybe-install-patch \ - maybe-install-perl \ - maybe-install-prms \ - maybe-install-rcs \ - maybe-install-readline \ - maybe-install-release \ - maybe-install-recode \ - maybe-install-sed \ - maybe-install-send-pr \ - maybe-install-shellutils \ - maybe-install-sid \ - maybe-install-sim \ - maybe-install-tar \ - maybe-install-texinfo \ - maybe-install-textutils \ - maybe-install-time \ - maybe-install-uudecode \ - maybe-install-wdiff \ - maybe-install-zip \ - maybe-install-zlib \ - maybe-install-gdb \ - maybe-install-expect \ - maybe-install-guile \ - maybe-install-tk \ - maybe-install-tix \ - maybe-install-libtermcap \ - maybe-install-utils - -.PHONY: install-host -install-host: maybe-install-gcc \ - maybe-install-ash \ - maybe-install-autoconf \ - maybe-install-automake \ - maybe-install-bash \ - maybe-install-bfd \ - maybe-install-opcodes \ - maybe-install-binutils \ - maybe-install-bison \ - maybe-install-byacc \ - maybe-install-bzip2 \ - maybe-install-dejagnu \ - maybe-install-diff \ - maybe-install-dosutils \ - maybe-install-etc \ - maybe-install-fastjar \ - maybe-install-fileutils \ - maybe-install-findutils \ - maybe-install-find \ - maybe-install-flex \ - maybe-install-gas \ - maybe-install-gawk \ - maybe-install-gettext \ - maybe-install-gnuserv \ - maybe-install-gprof \ - maybe-install-gzip \ - maybe-install-hello \ - maybe-install-indent \ - maybe-install-intl \ - maybe-install-tcl \ - maybe-install-itcl \ - maybe-install-ld \ - maybe-install-libgui \ - maybe-install-libiberty \ - maybe-install-libtool \ - maybe-install-m4 \ - maybe-install-make \ - maybe-install-mmalloc \ - maybe-install-patch \ - maybe-install-perl \ - maybe-install-prms \ - maybe-install-rcs \ - maybe-install-readline \ - maybe-install-release \ - maybe-install-recode \ - maybe-install-sed \ - maybe-install-send-pr \ - maybe-install-shellutils \ - maybe-install-sid \ - maybe-install-sim \ - maybe-install-tar \ - maybe-install-texinfo \ - maybe-install-textutils \ - maybe-install-time \ - maybe-install-uudecode \ - maybe-install-wdiff \ - maybe-install-zip \ - maybe-install-zlib \ - maybe-install-gdb \ - maybe-install-expect \ - maybe-install-guile \ - maybe-install-tk \ - maybe-install-tix \ - maybe-install-libtermcap \ - maybe-install-utils - -.PHONY: install-target -install-target: \ - maybe-install-target-libstdc++-v3 \ - maybe-install-target-newlib \ - maybe-install-target-libf2c \ - maybe-install-target-libobjc \ - maybe-install-target-libtermcap \ - maybe-install-target-winsup \ - maybe-install-target-libgloss \ - maybe-install-target-libiberty \ - maybe-install-target-gperf \ - maybe-install-target-examples \ - maybe-install-target-libffi \ - maybe-install-target-libjava \ - maybe-install-target-zlib \ - maybe-install-target-boehm-gc \ - maybe-install-target-qthreads \ - maybe-install-target-rda \ - maybe-install-target-libada - -uninstall: - @echo "the uninstall target is not supported in this tree" - -.PHONY: install.all -install.all: install-no-fixedincludes - @if [ -f ./gcc/Makefile ] ; then \ - r=`${PWD_COMMAND}` ; export r ; \ - $(SET_LIB_PATH) \ - (cd ./gcc && \ - $(MAKE) $(FLAGS_TO_PASS) install-headers) ; \ - else \ - true ; \ - fi - -# install-no-fixedincludes is used because Cygnus can not distribute -# the fixed header files. -.PHONY: install-no-fixedincludes -install-no-fixedincludes: installdirs install-host-nogcc \ - install-target gcc-no-fixedincludes - -### other supporting targets - -MAKEDIRS= \ - $(DESTDIR)$(prefix) \ - $(DESTDIR)$(exec_prefix) -.PHONY: installdirs -installdirs: mkinstalldirs - $(SHELL) $(srcdir)/mkinstalldirs $(MAKEDIRS) - -dir.info: do-install-info - if [ -f $(srcdir)/texinfo/gen-info-dir ] ; then \ - $(srcdir)/texinfo/gen-info-dir $(DESTDIR)$(infodir) $(srcdir)/texinfo/dir.info-template > dir.info.new ; \ - mv -f dir.info.new dir.info ; \ - else true ; \ - fi - -dist: - @echo "Building a full distribution of this tree isn't done" - @echo "via 'make dist'. Check out the etc/ subdirectory" - -etags tags: TAGS - -# Right now this just builds TAGS in each subdirectory. emacs19 has the -# ability to use several tags files at once, so there is probably no need -# to combine them into one big TAGS file (like CVS 1.3 does). We could -# (if we felt like it) have this Makefile write a piece of elisp which -# the user could load to tell emacs19 where all the TAGS files we just -# built are. -TAGS: do-TAGS - -# -------------------------------------- -# Modules which run on the build machine -# -------------------------------------- +# There's only one multilib.out. Cleverer subdirs shouldn't need it copied. +$(TARGET_SUBDIR)/libtermcap/multilib.out: multilib.out + $(SHELL) $(srcdir)/mkinstalldirs $(TARGET_SUBDIR)/libtermcap ; \ + rm -f $(TARGET_SUBDIR)/libtermcap/Makefile || : ; \ + cp multilib.out $(TARGET_SUBDIR)/libtermcap/multilib.out -.PHONY: configure-build-libiberty maybe-configure-build-libiberty -maybe-configure-build-libiberty: -configure-build-libiberty: - @test ! -f $(BUILD_SUBDIR)/libiberty/Makefile || exit 0; \ - $(SHELL) $(srcdir)/mkinstalldirs $(BUILD_SUBDIR)/libiberty ; \ +configure-target-libtermcap: $(TARGET_SUBDIR)/libtermcap/multilib.out + @test ! -f $(TARGET_SUBDIR)/libtermcap/Makefile || exit 0; \ + $(SHELL) $(srcdir)/mkinstalldirs $(TARGET_SUBDIR)/libtermcap ; \ r=`${PWD_COMMAND}`; export r; \ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ - AR="$(AR_FOR_BUILD)"; export AR; \ - AS="$(AS_FOR_BUILD)"; export AS; \ - CC="$(CC_FOR_BUILD)"; export CC; \ - CFLAGS="$(CFLAGS_FOR_BUILD)"; export CFLAGS; \ + $(SET_LIB_PATH) \ + AR="$(AR_FOR_TARGET)"; export AR; \ + AS="$(AS_FOR_TARGET)"; export AS; \ + CC="$(CC_FOR_TARGET)"; export CC; \ + CFLAGS="$(CFLAGS_FOR_TARGET)"; export CFLAGS; \ CONFIG_SHELL="$(SHELL)"; export CONFIG_SHELL; \ - CXX="$(CXX_FOR_BUILD)"; export CXX; \ - CXXFLAGS="$(CXXFLAGS_FOR_BUILD)"; export CXXFLAGS; \ - GCJ="$(GCJ_FOR_BUILD)"; export GCJ; \ - DLLTOOL="$(DLLTOOL_FOR_BUILD)"; export DLLTOOL; \ - LD="$(LD_FOR_BUILD)"; export LD; \ - LDFLAGS="$(LDFLAGS_FOR_BUILD)"; export LDFLAGS; \ - NM="$(NM_FOR_BUILD)"; export NM; \ - RANLIB="$(RANLIB_FOR_BUILD)"; export RANLIB; \ - WINDRES="$(WINDRES_FOR_BUILD)"; export WINDRES; \ - echo Configuring in $(BUILD_SUBDIR)/libiberty; \ - cd "$(BUILD_SUBDIR)/libiberty" || exit 1; \ + CPPFLAGS="$(CFLAGS_FOR_TARGET)"; export CPPFLAGS; \ + CXX="$(CXX_FOR_TARGET)"; export CXX; \ + CXXFLAGS="$(CXXFLAGS_FOR_TARGET)"; export CXXFLAGS; \ + GCJ="$(GCJ_FOR_TARGET)"; export GCJ; \ + DLLTOOL="$(DLLTOOL_FOR_TARGET)"; export DLLTOOL; \ + LD="$(LD_FOR_TARGET)"; export LD; \ + LDFLAGS="$(LDFLAGS_FOR_TARGET)"; export LDFLAGS; \ + NM="$(NM_FOR_TARGET)"; export NM; \ + RANLIB="$(RANLIB_FOR_TARGET)"; export RANLIB; \ + WINDRES="$(WINDRES_FOR_TARGET)"; export WINDRES; \ + echo Configuring in $(TARGET_SUBDIR)/libtermcap; \ + cd "$(TARGET_SUBDIR)/libtermcap" || exit 1; \ case $(srcdir) in \ /* | [A-Za-z]:[\\/]*) \ topdir=$(srcdir) ;; \ *) \ - case "$(BUILD_SUBDIR)" in \ + case "$(TARGET_SUBDIR)" in \ .) topdir="../$(srcdir)" ;; \ *) topdir="../../$(srcdir)" ;; \ esac ;; \ esac; \ if [ "$(srcdir)" = "." ] ; then \ - if [ "$(BUILD_SUBDIR)" != "." ] ; then \ - if $(SHELL) $$s/symlink-tree $${topdir}/libiberty "no-such-file" ; then \ + if [ "$(TARGET_SUBDIR)" != "." ] ; then \ + if $(SHELL) $$s/symlink-tree $${topdir}/libtermcap "no-such-file" ; then \ if [ -f Makefile ]; then \ if $(MAKE) distclean; then \ true; \ @@ -17858,4311 +20019,1852 @@ configure-build-libiberty: srcdiroption="--srcdir=."; \ libsrcdir="."; \ else \ - srcdiroption="--srcdir=$${topdir}/libiberty"; \ - libsrcdir="$$s/libiberty"; \ + srcdiroption="--srcdir=$${topdir}/libtermcap"; \ + libsrcdir="$$s/libtermcap"; \ fi; \ rm -f no-such-file || : ; \ CONFIG_SITE=no-such-file $(SHELL) $${libsrcdir}/configure \ - $(BUILD_CONFIGARGS) $${srcdiroption} \ - --with-build-subdir="$(BUILD_SUBDIR)" \ - || exit 1 - -.PHONY: all-build-libiberty maybe-all-build-libiberty -maybe-all-build-libiberty: -all-build-libiberty: configure-build-libiberty - @r=`${PWD_COMMAND}`; export r; \ - s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ - (cd $(BUILD_SUBDIR)/libiberty && $(MAKE) all) - - -# -------------------------------------- -# Modules which run on the host machine -# -------------------------------------- - -.PHONY: configure-ash maybe-configure-ash -maybe-configure-ash: -configure-ash: - @test ! -f ash/Makefile || exit 0; \ - [ -d ash ] || mkdir ash; \ - r=`${PWD_COMMAND}`; export r; \ - s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ - CC="$(CC)"; export CC; \ - CFLAGS="$(CFLAGS)"; export CFLAGS; \ - CONFIG_SHELL="$(SHELL)"; export CONFIG_SHELL; \ - CXX="$(CXX)"; export CXX; \ - CXXFLAGS="$(CXXFLAGS)"; export CXXFLAGS; \ - AR="$(AR)"; export AR; \ - AS="$(AS)"; export AS; \ - CC_FOR_BUILD="$(CC_FOR_BUILD)"; export CC_FOR_BUILD; \ - DLLTOOL="$(DLLTOOL)"; export DLLTOOL; \ - LD="$(LD)"; export LD; \ - NM="$(NM)"; export NM; \ - RANLIB="$(RANLIB)"; export RANLIB; \ - WINDRES="$(WINDRES)"; export WINDRES; \ - OBJCOPY="$(OBJCOPY)"; export OBJCOPY; \ - OBJDUMP="$(OBJDUMP)"; export OBJDUMP; \ - echo Configuring in ash; \ - cd ash || exit 1; \ - case $(srcdir) in \ - \.) \ - srcdiroption="--srcdir=."; \ - libsrcdir=".";; \ - /* | [A-Za-z]:[\\/]*) \ - srcdiroption="--srcdir=$(srcdir)/ash"; \ - libsrcdir="$$s/ash";; \ - *) \ - srcdiroption="--srcdir=../$(srcdir)/ash"; \ - libsrcdir="$$s/ash";; \ - esac; \ - $(SHELL) $${libsrcdir}/configure \ - $(HOST_CONFIGARGS) $${srcdiroption} \ + $(TARGET_CONFIGARGS) $${srcdiroption} \ + --with-target-subdir="$(TARGET_SUBDIR)" \ || exit 1 -.PHONY: all-ash maybe-all-ash -maybe-all-ash: -all-ash: configure-ash - @r=`${PWD_COMMAND}`; export r; \ - s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ - $(SET_LIB_PATH) \ - (cd ash && $(MAKE) $(FLAGS_TO_PASS) all) - -.PHONY: check-ash maybe-check-ash -maybe-check-ash: - -check-ash: - @r=`${PWD_COMMAND}`; export r; \ - s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ - $(SET_LIB_PATH) \ - (cd ash && $(MAKE) $(FLAGS_TO_PASS) check) - - -.PHONY: install-ash maybe-install-ash -maybe-install-ash: - -install-ash: installdirs +.PHONY: all-target-libtermcap maybe-all-target-libtermcap +maybe-all-target-libtermcap: +all-target-libtermcap: configure-target-libtermcap @r=`${PWD_COMMAND}`; export r; \ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ $(SET_LIB_PATH) \ - (cd ash && $(MAKE) $(FLAGS_TO_PASS) install) + (cd $(TARGET_SUBDIR)/libtermcap && \ + $(MAKE) $(TARGET_FLAGS_TO_PASS) all) +.PHONY: check-target-libtermcap maybe-check-target-libtermcap +maybe-check-target-libtermcap: -.PHONY: configure-autoconf maybe-configure-autoconf -maybe-configure-autoconf: -configure-autoconf: - @test ! -f autoconf/Makefile || exit 0; \ - [ -d autoconf ] || mkdir autoconf; \ - r=`${PWD_COMMAND}`; export r; \ - s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ - CC="$(CC)"; export CC; \ - CFLAGS="$(CFLAGS)"; export CFLAGS; \ - CONFIG_SHELL="$(SHELL)"; export CONFIG_SHELL; \ - CXX="$(CXX)"; export CXX; \ - CXXFLAGS="$(CXXFLAGS)"; export CXXFLAGS; \ - AR="$(AR)"; export AR; \ - AS="$(AS)"; export AS; \ - CC_FOR_BUILD="$(CC_FOR_BUILD)"; export CC_FOR_BUILD; \ - DLLTOOL="$(DLLTOOL)"; export DLLTOOL; \ - LD="$(LD)"; export LD; \ - NM="$(NM)"; export NM; \ - RANLIB="$(RANLIB)"; export RANLIB; \ - WINDRES="$(WINDRES)"; export WINDRES; \ - OBJCOPY="$(OBJCOPY)"; export OBJCOPY; \ - OBJDUMP="$(OBJDUMP)"; export OBJDUMP; \ - echo Configuring in autoconf; \ - cd autoconf || exit 1; \ - case $(srcdir) in \ - \.) \ - srcdiroption="--srcdir=."; \ - libsrcdir=".";; \ - /* | [A-Za-z]:[\\/]*) \ - srcdiroption="--srcdir=$(srcdir)/autoconf"; \ - libsrcdir="$$s/autoconf";; \ - *) \ - srcdiroption="--srcdir=../$(srcdir)/autoconf"; \ - libsrcdir="$$s/autoconf";; \ - esac; \ - $(SHELL) $${libsrcdir}/configure \ - $(HOST_CONFIGARGS) $${srcdiroption} \ - || exit 1 +# Dummy target for uncheckable module. +check-target-libtermcap: -.PHONY: all-autoconf maybe-all-autoconf -maybe-all-autoconf: -all-autoconf: configure-autoconf - @r=`${PWD_COMMAND}`; export r; \ - s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ - $(SET_LIB_PATH) \ - (cd autoconf && $(MAKE) $(FLAGS_TO_PASS) all) -.PHONY: check-autoconf maybe-check-autoconf -maybe-check-autoconf: +.PHONY: install-target-libtermcap maybe-install-target-libtermcap +maybe-install-target-libtermcap: -check-autoconf: +install-target-libtermcap: installdirs @r=`${PWD_COMMAND}`; export r; \ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ $(SET_LIB_PATH) \ - (cd autoconf && $(MAKE) $(FLAGS_TO_PASS) check) - + (cd $(TARGET_SUBDIR)/libtermcap && \ + $(MAKE) $(TARGET_FLAGS_TO_PASS) install) -.PHONY: install-autoconf maybe-install-autoconf -maybe-install-autoconf: -install-autoconf: installdirs - @r=`${PWD_COMMAND}`; export r; \ - s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ - $(SET_LIB_PATH) \ - (cd autoconf && $(MAKE) $(FLAGS_TO_PASS) install) +# Other targets (info, dvi, etc.) +.PHONY: maybe-info-target-libtermcap info-target-libtermcap +maybe-info-target-libtermcap: -.PHONY: configure-automake maybe-configure-automake -maybe-configure-automake: -configure-automake: - @test ! -f automake/Makefile || exit 0; \ - [ -d automake ] || mkdir automake; \ +info-target-libtermcap: \ + configure-target-libtermcap + @[ -f $(TARGET_SUBDIR)/libtermcap/Makefile ] || exit 0 ; \ r=`${PWD_COMMAND}`; export r; \ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ - CC="$(CC)"; export CC; \ - CFLAGS="$(CFLAGS)"; export CFLAGS; \ - CONFIG_SHELL="$(SHELL)"; export CONFIG_SHELL; \ - CXX="$(CXX)"; export CXX; \ - CXXFLAGS="$(CXXFLAGS)"; export CXXFLAGS; \ - AR="$(AR)"; export AR; \ - AS="$(AS)"; export AS; \ - CC_FOR_BUILD="$(CC_FOR_BUILD)"; export CC_FOR_BUILD; \ - DLLTOOL="$(DLLTOOL)"; export DLLTOOL; \ - LD="$(LD)"; export LD; \ - NM="$(NM)"; export NM; \ - RANLIB="$(RANLIB)"; export RANLIB; \ - WINDRES="$(WINDRES)"; export WINDRES; \ - OBJCOPY="$(OBJCOPY)"; export OBJCOPY; \ - OBJDUMP="$(OBJDUMP)"; export OBJDUMP; \ - echo Configuring in automake; \ - cd automake || exit 1; \ - case $(srcdir) in \ - \.) \ - srcdiroption="--srcdir=."; \ - libsrcdir=".";; \ - /* | [A-Za-z]:[\\/]*) \ - srcdiroption="--srcdir=$(srcdir)/automake"; \ - libsrcdir="$$s/automake";; \ - *) \ - srcdiroption="--srcdir=../$(srcdir)/automake"; \ - libsrcdir="$$s/automake";; \ - esac; \ - $(SHELL) $${libsrcdir}/configure \ - $(HOST_CONFIGARGS) $${srcdiroption} \ - || exit 1 - -.PHONY: all-automake maybe-all-automake -maybe-all-automake: -all-automake: configure-automake - @r=`${PWD_COMMAND}`; export r; \ - s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ - $(SET_LIB_PATH) \ - (cd automake && $(MAKE) $(FLAGS_TO_PASS) all) - -.PHONY: check-automake maybe-check-automake -maybe-check-automake: - -check-automake: - @r=`${PWD_COMMAND}`; export r; \ - s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ - $(SET_LIB_PATH) \ - (cd automake && $(MAKE) $(FLAGS_TO_PASS) check) - - -.PHONY: install-automake maybe-install-automake -maybe-install-automake: - -install-automake: installdirs - @r=`${PWD_COMMAND}`; export r; \ - s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ $(SET_LIB_PATH) \ - (cd automake && $(MAKE) $(FLAGS_TO_PASS) install) - - -.PHONY: configure-bash maybe-configure-bash -maybe-configure-bash: -configure-bash: - @test ! -f bash/Makefile || exit 0; \ - [ -d bash ] || mkdir bash; \ - r=`${PWD_COMMAND}`; export r; \ - s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ - CC="$(CC)"; export CC; \ - CFLAGS="$(CFLAGS)"; export CFLAGS; \ - CONFIG_SHELL="$(SHELL)"; export CONFIG_SHELL; \ - CXX="$(CXX)"; export CXX; \ - CXXFLAGS="$(CXXFLAGS)"; export CXXFLAGS; \ - AR="$(AR)"; export AR; \ - AS="$(AS)"; export AS; \ - CC_FOR_BUILD="$(CC_FOR_BUILD)"; export CC_FOR_BUILD; \ - DLLTOOL="$(DLLTOOL)"; export DLLTOOL; \ - LD="$(LD)"; export LD; \ - NM="$(NM)"; export NM; \ - RANLIB="$(RANLIB)"; export RANLIB; \ - WINDRES="$(WINDRES)"; export WINDRES; \ - OBJCOPY="$(OBJCOPY)"; export OBJCOPY; \ - OBJDUMP="$(OBJDUMP)"; export OBJDUMP; \ - echo Configuring in bash; \ - cd bash || exit 1; \ - case $(srcdir) in \ - \.) \ - srcdiroption="--srcdir=."; \ - libsrcdir=".";; \ - /* | [A-Za-z]:[\\/]*) \ - srcdiroption="--srcdir=$(srcdir)/bash"; \ - libsrcdir="$$s/bash";; \ - *) \ - srcdiroption="--srcdir=../$(srcdir)/bash"; \ - libsrcdir="$$s/bash";; \ - esac; \ - $(SHELL) $${libsrcdir}/configure \ - $(HOST_CONFIGARGS) $${srcdiroption} \ + echo "Doing info in $(TARGET_SUBDIR)/libtermcap" ; \ + for flag in $(EXTRA_TARGET_FLAGS); do \ + eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \ + done; \ + (cd $(TARGET_SUBDIR)/libtermcap && \ + $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \ + "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \ + "RANLIB=$${RANLIB}" \ + "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" \ + info) \ || exit 1 -.PHONY: all-bash maybe-all-bash -maybe-all-bash: -all-bash: configure-bash - @r=`${PWD_COMMAND}`; export r; \ - s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ - $(SET_LIB_PATH) \ - (cd bash && $(MAKE) $(FLAGS_TO_PASS) all) - -.PHONY: check-bash maybe-check-bash -maybe-check-bash: - -check-bash: - @r=`${PWD_COMMAND}`; export r; \ - s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ - $(SET_LIB_PATH) \ - (cd bash && $(MAKE) $(FLAGS_TO_PASS) check) - - -.PHONY: install-bash maybe-install-bash -maybe-install-bash: - -install-bash: installdirs - @r=`${PWD_COMMAND}`; export r; \ - s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ - $(SET_LIB_PATH) \ - (cd bash && $(MAKE) $(FLAGS_TO_PASS) install) +.PHONY: maybe-dvi-target-libtermcap dvi-target-libtermcap +maybe-dvi-target-libtermcap: -.PHONY: configure-bfd maybe-configure-bfd -maybe-configure-bfd: -configure-bfd: - @test ! -f bfd/Makefile || exit 0; \ - [ -d bfd ] || mkdir bfd; \ +dvi-target-libtermcap: \ + configure-target-libtermcap + @[ -f $(TARGET_SUBDIR)/libtermcap/Makefile ] || exit 0 ; \ r=`${PWD_COMMAND}`; export r; \ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ - CC="$(CC)"; export CC; \ - CFLAGS="$(CFLAGS)"; export CFLAGS; \ - CONFIG_SHELL="$(SHELL)"; export CONFIG_SHELL; \ - CXX="$(CXX)"; export CXX; \ - CXXFLAGS="$(CXXFLAGS)"; export CXXFLAGS; \ - AR="$(AR)"; export AR; \ - AS="$(AS)"; export AS; \ - CC_FOR_BUILD="$(CC_FOR_BUILD)"; export CC_FOR_BUILD; \ - DLLTOOL="$(DLLTOOL)"; export DLLTOOL; \ - LD="$(LD)"; export LD; \ - NM="$(NM)"; export NM; \ - RANLIB="$(RANLIB)"; export RANLIB; \ - WINDRES="$(WINDRES)"; export WINDRES; \ - OBJCOPY="$(OBJCOPY)"; export OBJCOPY; \ - OBJDUMP="$(OBJDUMP)"; export OBJDUMP; \ - echo Configuring in bfd; \ - cd bfd || exit 1; \ - case $(srcdir) in \ - \.) \ - srcdiroption="--srcdir=."; \ - libsrcdir=".";; \ - /* | [A-Za-z]:[\\/]*) \ - srcdiroption="--srcdir=$(srcdir)/bfd"; \ - libsrcdir="$$s/bfd";; \ - *) \ - srcdiroption="--srcdir=../$(srcdir)/bfd"; \ - libsrcdir="$$s/bfd";; \ - esac; \ - $(SHELL) $${libsrcdir}/configure \ - $(HOST_CONFIGARGS) $${srcdiroption} \ - || exit 1 - -.PHONY: all-bfd maybe-all-bfd -maybe-all-bfd: -all-bfd: configure-bfd - @r=`${PWD_COMMAND}`; export r; \ - s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ $(SET_LIB_PATH) \ - (cd bfd && $(MAKE) $(FLAGS_TO_PASS) all) - -.PHONY: check-bfd maybe-check-bfd -maybe-check-bfd: - -check-bfd: - @r=`${PWD_COMMAND}`; export r; \ - s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ - $(SET_LIB_PATH) \ - (cd bfd && $(MAKE) $(FLAGS_TO_PASS) check) - - -.PHONY: install-bfd maybe-install-bfd -maybe-install-bfd: - -install-bfd: installdirs - @r=`${PWD_COMMAND}`; export r; \ - s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ - $(SET_LIB_PATH) \ - (cd bfd && $(MAKE) $(FLAGS_TO_PASS) install) - - -.PHONY: configure-opcodes maybe-configure-opcodes -maybe-configure-opcodes: -configure-opcodes: - @test ! -f opcodes/Makefile || exit 0; \ - [ -d opcodes ] || mkdir opcodes; \ - r=`${PWD_COMMAND}`; export r; \ - s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ - CC="$(CC)"; export CC; \ - CFLAGS="$(CFLAGS)"; export CFLAGS; \ - CONFIG_SHELL="$(SHELL)"; export CONFIG_SHELL; \ - CXX="$(CXX)"; export CXX; \ - CXXFLAGS="$(CXXFLAGS)"; export CXXFLAGS; \ - AR="$(AR)"; export AR; \ - AS="$(AS)"; export AS; \ - CC_FOR_BUILD="$(CC_FOR_BUILD)"; export CC_FOR_BUILD; \ - DLLTOOL="$(DLLTOOL)"; export DLLTOOL; \ - LD="$(LD)"; export LD; \ - NM="$(NM)"; export NM; \ - RANLIB="$(RANLIB)"; export RANLIB; \ - WINDRES="$(WINDRES)"; export WINDRES; \ - OBJCOPY="$(OBJCOPY)"; export OBJCOPY; \ - OBJDUMP="$(OBJDUMP)"; export OBJDUMP; \ - echo Configuring in opcodes; \ - cd opcodes || exit 1; \ - case $(srcdir) in \ - \.) \ - srcdiroption="--srcdir=."; \ - libsrcdir=".";; \ - /* | [A-Za-z]:[\\/]*) \ - srcdiroption="--srcdir=$(srcdir)/opcodes"; \ - libsrcdir="$$s/opcodes";; \ - *) \ - srcdiroption="--srcdir=../$(srcdir)/opcodes"; \ - libsrcdir="$$s/opcodes";; \ - esac; \ - $(SHELL) $${libsrcdir}/configure \ - $(HOST_CONFIGARGS) $${srcdiroption} \ + echo "Doing dvi in $(TARGET_SUBDIR)/libtermcap" ; \ + for flag in $(EXTRA_TARGET_FLAGS); do \ + eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \ + done; \ + (cd $(TARGET_SUBDIR)/libtermcap && \ + $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \ + "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \ + "RANLIB=$${RANLIB}" \ + "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" \ + dvi) \ || exit 1 -.PHONY: all-opcodes maybe-all-opcodes -maybe-all-opcodes: -all-opcodes: configure-opcodes - @r=`${PWD_COMMAND}`; export r; \ - s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ - $(SET_LIB_PATH) \ - (cd opcodes && $(MAKE) $(FLAGS_TO_PASS) all) - -.PHONY: check-opcodes maybe-check-opcodes -maybe-check-opcodes: - -check-opcodes: - @r=`${PWD_COMMAND}`; export r; \ - s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ - $(SET_LIB_PATH) \ - (cd opcodes && $(MAKE) $(FLAGS_TO_PASS) check) - - -.PHONY: install-opcodes maybe-install-opcodes -maybe-install-opcodes: - -install-opcodes: installdirs - @r=`${PWD_COMMAND}`; export r; \ - s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ - $(SET_LIB_PATH) \ - (cd opcodes && $(MAKE) $(FLAGS_TO_PASS) install) +.PHONY: maybe-TAGS-target-libtermcap TAGS-target-libtermcap +maybe-TAGS-target-libtermcap: -.PHONY: configure-binutils maybe-configure-binutils -maybe-configure-binutils: -configure-binutils: - @test ! -f binutils/Makefile || exit 0; \ - [ -d binutils ] || mkdir binutils; \ +TAGS-target-libtermcap: \ + configure-target-libtermcap + @[ -f $(TARGET_SUBDIR)/libtermcap/Makefile ] || exit 0 ; \ r=`${PWD_COMMAND}`; export r; \ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ - CC="$(CC)"; export CC; \ - CFLAGS="$(CFLAGS)"; export CFLAGS; \ - CONFIG_SHELL="$(SHELL)"; export CONFIG_SHELL; \ - CXX="$(CXX)"; export CXX; \ - CXXFLAGS="$(CXXFLAGS)"; export CXXFLAGS; \ - AR="$(AR)"; export AR; \ - AS="$(AS)"; export AS; \ - CC_FOR_BUILD="$(CC_FOR_BUILD)"; export CC_FOR_BUILD; \ - DLLTOOL="$(DLLTOOL)"; export DLLTOOL; \ - LD="$(LD)"; export LD; \ - NM="$(NM)"; export NM; \ - RANLIB="$(RANLIB)"; export RANLIB; \ - WINDRES="$(WINDRES)"; export WINDRES; \ - OBJCOPY="$(OBJCOPY)"; export OBJCOPY; \ - OBJDUMP="$(OBJDUMP)"; export OBJDUMP; \ - echo Configuring in binutils; \ - cd binutils || exit 1; \ - case $(srcdir) in \ - \.) \ - srcdiroption="--srcdir=."; \ - libsrcdir=".";; \ - /* | [A-Za-z]:[\\/]*) \ - srcdiroption="--srcdir=$(srcdir)/binutils"; \ - libsrcdir="$$s/binutils";; \ - *) \ - srcdiroption="--srcdir=../$(srcdir)/binutils"; \ - libsrcdir="$$s/binutils";; \ - esac; \ - $(SHELL) $${libsrcdir}/configure \ - $(HOST_CONFIGARGS) $${srcdiroption} \ - || exit 1 - -.PHONY: all-binutils maybe-all-binutils -maybe-all-binutils: -all-binutils: configure-binutils - @r=`${PWD_COMMAND}`; export r; \ - s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ $(SET_LIB_PATH) \ - (cd binutils && $(MAKE) $(FLAGS_TO_PASS) all) - -.PHONY: check-binutils maybe-check-binutils -maybe-check-binutils: - -check-binutils: - @r=`${PWD_COMMAND}`; export r; \ - s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ - $(SET_LIB_PATH) \ - (cd binutils && $(MAKE) $(FLAGS_TO_PASS) check) - - -.PHONY: install-binutils maybe-install-binutils -maybe-install-binutils: - -install-binutils: installdirs - @r=`${PWD_COMMAND}`; export r; \ - s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ - $(SET_LIB_PATH) \ - (cd binutils && $(MAKE) $(FLAGS_TO_PASS) install) - - -.PHONY: configure-bison maybe-configure-bison -maybe-configure-bison: -configure-bison: - @test ! -f bison/Makefile || exit 0; \ - [ -d bison ] || mkdir bison; \ - r=`${PWD_COMMAND}`; export r; \ - s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ - CC="$(CC)"; export CC; \ - CFLAGS="$(CFLAGS)"; export CFLAGS; \ - CONFIG_SHELL="$(SHELL)"; export CONFIG_SHELL; \ - CXX="$(CXX)"; export CXX; \ - CXXFLAGS="$(CXXFLAGS)"; export CXXFLAGS; \ - AR="$(AR)"; export AR; \ - AS="$(AS)"; export AS; \ - CC_FOR_BUILD="$(CC_FOR_BUILD)"; export CC_FOR_BUILD; \ - DLLTOOL="$(DLLTOOL)"; export DLLTOOL; \ - LD="$(LD)"; export LD; \ - NM="$(NM)"; export NM; \ - RANLIB="$(RANLIB)"; export RANLIB; \ - WINDRES="$(WINDRES)"; export WINDRES; \ - OBJCOPY="$(OBJCOPY)"; export OBJCOPY; \ - OBJDUMP="$(OBJDUMP)"; export OBJDUMP; \ - echo Configuring in bison; \ - cd bison || exit 1; \ - case $(srcdir) in \ - \.) \ - srcdiroption="--srcdir=."; \ - libsrcdir=".";; \ - /* | [A-Za-z]:[\\/]*) \ - srcdiroption="--srcdir=$(srcdir)/bison"; \ - libsrcdir="$$s/bison";; \ - *) \ - srcdiroption="--srcdir=../$(srcdir)/bison"; \ - libsrcdir="$$s/bison";; \ - esac; \ - $(SHELL) $${libsrcdir}/configure \ - $(HOST_CONFIGARGS) $${srcdiroption} \ + echo "Doing TAGS in $(TARGET_SUBDIR)/libtermcap" ; \ + for flag in $(EXTRA_TARGET_FLAGS); do \ + eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \ + done; \ + (cd $(TARGET_SUBDIR)/libtermcap && \ + $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \ + "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \ + "RANLIB=$${RANLIB}" \ + "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" \ + TAGS) \ || exit 1 -.PHONY: all-bison maybe-all-bison -maybe-all-bison: -all-bison: configure-bison - @r=`${PWD_COMMAND}`; export r; \ - s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ - $(SET_LIB_PATH) \ - (cd bison && $(MAKE) $(FLAGS_TO_PASS) all) - -.PHONY: check-bison maybe-check-bison -maybe-check-bison: - -# This module is only tested in a native toolchain. -check-bison: - @if [ '$(host)' = '$(target)' ] ; then \ - r=`${PWD_COMMAND}`; export r; \ - s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ - $(SET_LIB_PATH) \ - (cd bison && $(MAKE) $(FLAGS_TO_PASS) check); \ - fi - - -.PHONY: install-bison maybe-install-bison -maybe-install-bison: - -install-bison: installdirs - @r=`${PWD_COMMAND}`; export r; \ - s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ - $(SET_LIB_PATH) \ - (cd bison && $(MAKE) $(FLAGS_TO_PASS) install) +.PHONY: maybe-install-info-target-libtermcap install-info-target-libtermcap +maybe-install-info-target-libtermcap: -.PHONY: configure-byacc maybe-configure-byacc -maybe-configure-byacc: -configure-byacc: - @test ! -f byacc/Makefile || exit 0; \ - [ -d byacc ] || mkdir byacc; \ +install-info-target-libtermcap: \ + configure-target-libtermcap \ + info-target-libtermcap + @[ -f $(TARGET_SUBDIR)/libtermcap/Makefile ] || exit 0 ; \ r=`${PWD_COMMAND}`; export r; \ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ - CC="$(CC)"; export CC; \ - CFLAGS="$(CFLAGS)"; export CFLAGS; \ - CONFIG_SHELL="$(SHELL)"; export CONFIG_SHELL; \ - CXX="$(CXX)"; export CXX; \ - CXXFLAGS="$(CXXFLAGS)"; export CXXFLAGS; \ - AR="$(AR)"; export AR; \ - AS="$(AS)"; export AS; \ - CC_FOR_BUILD="$(CC_FOR_BUILD)"; export CC_FOR_BUILD; \ - DLLTOOL="$(DLLTOOL)"; export DLLTOOL; \ - LD="$(LD)"; export LD; \ - NM="$(NM)"; export NM; \ - RANLIB="$(RANLIB)"; export RANLIB; \ - WINDRES="$(WINDRES)"; export WINDRES; \ - OBJCOPY="$(OBJCOPY)"; export OBJCOPY; \ - OBJDUMP="$(OBJDUMP)"; export OBJDUMP; \ - echo Configuring in byacc; \ - cd byacc || exit 1; \ - case $(srcdir) in \ - \.) \ - srcdiroption="--srcdir=."; \ - libsrcdir=".";; \ - /* | [A-Za-z]:[\\/]*) \ - srcdiroption="--srcdir=$(srcdir)/byacc"; \ - libsrcdir="$$s/byacc";; \ - *) \ - srcdiroption="--srcdir=../$(srcdir)/byacc"; \ - libsrcdir="$$s/byacc";; \ - esac; \ - $(SHELL) $${libsrcdir}/configure \ - $(HOST_CONFIGARGS) $${srcdiroption} \ - || exit 1 - -.PHONY: all-byacc maybe-all-byacc -maybe-all-byacc: -all-byacc: configure-byacc - @r=`${PWD_COMMAND}`; export r; \ - s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ - $(SET_LIB_PATH) \ - (cd byacc && $(MAKE) $(FLAGS_TO_PASS) all) - -.PHONY: check-byacc maybe-check-byacc -maybe-check-byacc: - -# This module is only tested in a native toolchain. -check-byacc: - @if [ '$(host)' = '$(target)' ] ; then \ - r=`${PWD_COMMAND}`; export r; \ - s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ - $(SET_LIB_PATH) \ - (cd byacc && $(MAKE) $(FLAGS_TO_PASS) check); \ - fi - - -.PHONY: install-byacc maybe-install-byacc -maybe-install-byacc: - -install-byacc: installdirs - @r=`${PWD_COMMAND}`; export r; \ - s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ $(SET_LIB_PATH) \ - (cd byacc && $(MAKE) $(FLAGS_TO_PASS) install) - - -.PHONY: configure-bzip2 maybe-configure-bzip2 -maybe-configure-bzip2: -configure-bzip2: - @test ! -f bzip2/Makefile || exit 0; \ - [ -d bzip2 ] || mkdir bzip2; \ - r=`${PWD_COMMAND}`; export r; \ - s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ - CC="$(CC)"; export CC; \ - CFLAGS="$(CFLAGS)"; export CFLAGS; \ - CONFIG_SHELL="$(SHELL)"; export CONFIG_SHELL; \ - CXX="$(CXX)"; export CXX; \ - CXXFLAGS="$(CXXFLAGS)"; export CXXFLAGS; \ - AR="$(AR)"; export AR; \ - AS="$(AS)"; export AS; \ - CC_FOR_BUILD="$(CC_FOR_BUILD)"; export CC_FOR_BUILD; \ - DLLTOOL="$(DLLTOOL)"; export DLLTOOL; \ - LD="$(LD)"; export LD; \ - NM="$(NM)"; export NM; \ - RANLIB="$(RANLIB)"; export RANLIB; \ - WINDRES="$(WINDRES)"; export WINDRES; \ - OBJCOPY="$(OBJCOPY)"; export OBJCOPY; \ - OBJDUMP="$(OBJDUMP)"; export OBJDUMP; \ - echo Configuring in bzip2; \ - cd bzip2 || exit 1; \ - case $(srcdir) in \ - \.) \ - srcdiroption="--srcdir=."; \ - libsrcdir=".";; \ - /* | [A-Za-z]:[\\/]*) \ - srcdiroption="--srcdir=$(srcdir)/bzip2"; \ - libsrcdir="$$s/bzip2";; \ - *) \ - srcdiroption="--srcdir=../$(srcdir)/bzip2"; \ - libsrcdir="$$s/bzip2";; \ - esac; \ - $(SHELL) $${libsrcdir}/configure \ - $(HOST_CONFIGARGS) $${srcdiroption} \ + echo "Doing install-info in $(TARGET_SUBDIR)/libtermcap" ; \ + for flag in $(EXTRA_TARGET_FLAGS); do \ + eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \ + done; \ + (cd $(TARGET_SUBDIR)/libtermcap && \ + $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \ + "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \ + "RANLIB=$${RANLIB}" \ + "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" \ + install-info) \ || exit 1 -.PHONY: all-bzip2 maybe-all-bzip2 -maybe-all-bzip2: -all-bzip2: configure-bzip2 - @r=`${PWD_COMMAND}`; export r; \ - s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ - $(SET_LIB_PATH) \ - (cd bzip2 && $(MAKE) $(FLAGS_TO_PASS) all) - -.PHONY: check-bzip2 maybe-check-bzip2 -maybe-check-bzip2: - -check-bzip2: - @r=`${PWD_COMMAND}`; export r; \ - s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ - $(SET_LIB_PATH) \ - (cd bzip2 && $(MAKE) $(FLAGS_TO_PASS) check) - - -.PHONY: install-bzip2 maybe-install-bzip2 -maybe-install-bzip2: - -install-bzip2: installdirs - @r=`${PWD_COMMAND}`; export r; \ - s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ - $(SET_LIB_PATH) \ - (cd bzip2 && $(MAKE) $(FLAGS_TO_PASS) install) +.PHONY: maybe-installcheck-target-libtermcap installcheck-target-libtermcap +maybe-installcheck-target-libtermcap: -.PHONY: configure-dejagnu maybe-configure-dejagnu -maybe-configure-dejagnu: -configure-dejagnu: - @test ! -f dejagnu/Makefile || exit 0; \ - [ -d dejagnu ] || mkdir dejagnu; \ +installcheck-target-libtermcap: \ + configure-target-libtermcap + @[ -f $(TARGET_SUBDIR)/libtermcap/Makefile ] || exit 0 ; \ r=`${PWD_COMMAND}`; export r; \ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ - CC="$(CC)"; export CC; \ - CFLAGS="$(CFLAGS)"; export CFLAGS; \ - CONFIG_SHELL="$(SHELL)"; export CONFIG_SHELL; \ - CXX="$(CXX)"; export CXX; \ - CXXFLAGS="$(CXXFLAGS)"; export CXXFLAGS; \ - AR="$(AR)"; export AR; \ - AS="$(AS)"; export AS; \ - CC_FOR_BUILD="$(CC_FOR_BUILD)"; export CC_FOR_BUILD; \ - DLLTOOL="$(DLLTOOL)"; export DLLTOOL; \ - LD="$(LD)"; export LD; \ - NM="$(NM)"; export NM; \ - RANLIB="$(RANLIB)"; export RANLIB; \ - WINDRES="$(WINDRES)"; export WINDRES; \ - OBJCOPY="$(OBJCOPY)"; export OBJCOPY; \ - OBJDUMP="$(OBJDUMP)"; export OBJDUMP; \ - echo Configuring in dejagnu; \ - cd dejagnu || exit 1; \ - case $(srcdir) in \ - \.) \ - srcdiroption="--srcdir=."; \ - libsrcdir=".";; \ - /* | [A-Za-z]:[\\/]*) \ - srcdiroption="--srcdir=$(srcdir)/dejagnu"; \ - libsrcdir="$$s/dejagnu";; \ - *) \ - srcdiroption="--srcdir=../$(srcdir)/dejagnu"; \ - libsrcdir="$$s/dejagnu";; \ - esac; \ - $(SHELL) $${libsrcdir}/configure \ - $(HOST_CONFIGARGS) $${srcdiroption} \ - || exit 1 - -.PHONY: all-dejagnu maybe-all-dejagnu -maybe-all-dejagnu: -all-dejagnu: configure-dejagnu - @r=`${PWD_COMMAND}`; export r; \ - s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ $(SET_LIB_PATH) \ - (cd dejagnu && $(MAKE) $(FLAGS_TO_PASS) all) - -.PHONY: check-dejagnu maybe-check-dejagnu -maybe-check-dejagnu: - -check-dejagnu: - @r=`${PWD_COMMAND}`; export r; \ - s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ - $(SET_LIB_PATH) \ - (cd dejagnu && $(MAKE) $(FLAGS_TO_PASS) check) - - -.PHONY: install-dejagnu maybe-install-dejagnu -maybe-install-dejagnu: - -install-dejagnu: installdirs - @r=`${PWD_COMMAND}`; export r; \ - s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ - $(SET_LIB_PATH) \ - (cd dejagnu && $(MAKE) $(FLAGS_TO_PASS) install) - - -.PHONY: configure-diff maybe-configure-diff -maybe-configure-diff: -configure-diff: - @test ! -f diff/Makefile || exit 0; \ - [ -d diff ] || mkdir diff; \ - r=`${PWD_COMMAND}`; export r; \ - s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ - CC="$(CC)"; export CC; \ - CFLAGS="$(CFLAGS)"; export CFLAGS; \ - CONFIG_SHELL="$(SHELL)"; export CONFIG_SHELL; \ - CXX="$(CXX)"; export CXX; \ - CXXFLAGS="$(CXXFLAGS)"; export CXXFLAGS; \ - AR="$(AR)"; export AR; \ - AS="$(AS)"; export AS; \ - CC_FOR_BUILD="$(CC_FOR_BUILD)"; export CC_FOR_BUILD; \ - DLLTOOL="$(DLLTOOL)"; export DLLTOOL; \ - LD="$(LD)"; export LD; \ - NM="$(NM)"; export NM; \ - RANLIB="$(RANLIB)"; export RANLIB; \ - WINDRES="$(WINDRES)"; export WINDRES; \ - OBJCOPY="$(OBJCOPY)"; export OBJCOPY; \ - OBJDUMP="$(OBJDUMP)"; export OBJDUMP; \ - echo Configuring in diff; \ - cd diff || exit 1; \ - case $(srcdir) in \ - \.) \ - srcdiroption="--srcdir=."; \ - libsrcdir=".";; \ - /* | [A-Za-z]:[\\/]*) \ - srcdiroption="--srcdir=$(srcdir)/diff"; \ - libsrcdir="$$s/diff";; \ - *) \ - srcdiroption="--srcdir=../$(srcdir)/diff"; \ - libsrcdir="$$s/diff";; \ - esac; \ - $(SHELL) $${libsrcdir}/configure \ - $(HOST_CONFIGARGS) $${srcdiroption} \ + echo "Doing installcheck in $(TARGET_SUBDIR)/libtermcap" ; \ + for flag in $(EXTRA_TARGET_FLAGS); do \ + eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \ + done; \ + (cd $(TARGET_SUBDIR)/libtermcap && \ + $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \ + "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \ + "RANLIB=$${RANLIB}" \ + "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" \ + installcheck) \ || exit 1 -.PHONY: all-diff maybe-all-diff -maybe-all-diff: -all-diff: configure-diff - @r=`${PWD_COMMAND}`; export r; \ - s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ - $(SET_LIB_PATH) \ - (cd diff && $(MAKE) $(FLAGS_TO_PASS) all) - -.PHONY: check-diff maybe-check-diff -maybe-check-diff: - -check-diff: - @r=`${PWD_COMMAND}`; export r; \ - s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ - $(SET_LIB_PATH) \ - (cd diff && $(MAKE) $(FLAGS_TO_PASS) check) - - -.PHONY: install-diff maybe-install-diff -maybe-install-diff: - -install-diff: installdirs - @r=`${PWD_COMMAND}`; export r; \ - s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ - $(SET_LIB_PATH) \ - (cd diff && $(MAKE) $(FLAGS_TO_PASS) install) - -.PHONY: configure-dosutils maybe-configure-dosutils -maybe-configure-dosutils: -configure-dosutils: - @test ! -f dosutils/Makefile || exit 0; \ - [ -d dosutils ] || mkdir dosutils; \ - r=`${PWD_COMMAND}`; export r; \ - s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ - CC="$(CC)"; export CC; \ - CFLAGS="$(CFLAGS)"; export CFLAGS; \ - CONFIG_SHELL="$(SHELL)"; export CONFIG_SHELL; \ - CXX="$(CXX)"; export CXX; \ - CXXFLAGS="$(CXXFLAGS)"; export CXXFLAGS; \ - AR="$(AR)"; export AR; \ - AS="$(AS)"; export AS; \ - CC_FOR_BUILD="$(CC_FOR_BUILD)"; export CC_FOR_BUILD; \ - DLLTOOL="$(DLLTOOL)"; export DLLTOOL; \ - LD="$(LD)"; export LD; \ - NM="$(NM)"; export NM; \ - RANLIB="$(RANLIB)"; export RANLIB; \ - WINDRES="$(WINDRES)"; export WINDRES; \ - OBJCOPY="$(OBJCOPY)"; export OBJCOPY; \ - OBJDUMP="$(OBJDUMP)"; export OBJDUMP; \ - echo Configuring in dosutils; \ - cd dosutils || exit 1; \ - case $(srcdir) in \ - \.) \ - srcdiroption="--srcdir=."; \ - libsrcdir=".";; \ - /* | [A-Za-z]:[\\/]*) \ - srcdiroption="--srcdir=$(srcdir)/dosutils"; \ - libsrcdir="$$s/dosutils";; \ - *) \ - srcdiroption="--srcdir=../$(srcdir)/dosutils"; \ - libsrcdir="$$s/dosutils";; \ - esac; \ - $(SHELL) $${libsrcdir}/configure \ - $(HOST_CONFIGARGS) $${srcdiroption} \ - || exit 1 - -.PHONY: all-dosutils maybe-all-dosutils -maybe-all-dosutils: -all-dosutils: configure-dosutils - @r=`${PWD_COMMAND}`; export r; \ - s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ - $(SET_LIB_PATH) \ - (cd dosutils && $(MAKE) $(FLAGS_TO_PASS) all) +.PHONY: maybe-mostlyclean-target-libtermcap mostlyclean-target-libtermcap +maybe-mostlyclean-target-libtermcap: -.PHONY: check-dosutils maybe-check-dosutils -maybe-check-dosutils: +# libtermcap doesn't support mostlyclean. +mostlyclean-target-libtermcap: -check-dosutils: +.PHONY: maybe-clean-target-libtermcap clean-target-libtermcap +maybe-clean-target-libtermcap: -.PHONY: install-dosutils maybe-install-dosutils -maybe-install-dosutils: +# libtermcap doesn't support clean. +clean-target-libtermcap: -install-dosutils: installdirs - @r=`${PWD_COMMAND}`; export r; \ - s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ - $(SET_LIB_PATH) \ - (cd dosutils && $(MAKE) $(FLAGS_TO_PASS) install) +.PHONY: maybe-distclean-target-libtermcap distclean-target-libtermcap +maybe-distclean-target-libtermcap: -.PHONY: configure-etc maybe-configure-etc -maybe-configure-etc: -configure-etc: - @test ! -f etc/Makefile || exit 0; \ - [ -d etc ] || mkdir etc; \ - r=`${PWD_COMMAND}`; export r; \ - s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ - CC="$(CC)"; export CC; \ - CFLAGS="$(CFLAGS)"; export CFLAGS; \ - CONFIG_SHELL="$(SHELL)"; export CONFIG_SHELL; \ - CXX="$(CXX)"; export CXX; \ - CXXFLAGS="$(CXXFLAGS)"; export CXXFLAGS; \ - AR="$(AR)"; export AR; \ - AS="$(AS)"; export AS; \ - CC_FOR_BUILD="$(CC_FOR_BUILD)"; export CC_FOR_BUILD; \ - DLLTOOL="$(DLLTOOL)"; export DLLTOOL; \ - LD="$(LD)"; export LD; \ - NM="$(NM)"; export NM; \ - RANLIB="$(RANLIB)"; export RANLIB; \ - WINDRES="$(WINDRES)"; export WINDRES; \ - OBJCOPY="$(OBJCOPY)"; export OBJCOPY; \ - OBJDUMP="$(OBJDUMP)"; export OBJDUMP; \ - echo Configuring in etc; \ - cd etc || exit 1; \ - case $(srcdir) in \ - \.) \ - srcdiroption="--srcdir=."; \ - libsrcdir=".";; \ - /* | [A-Za-z]:[\\/]*) \ - srcdiroption="--srcdir=$(srcdir)/etc"; \ - libsrcdir="$$s/etc";; \ - *) \ - srcdiroption="--srcdir=../$(srcdir)/etc"; \ - libsrcdir="$$s/etc";; \ - esac; \ - $(SHELL) $${libsrcdir}/configure \ - $(HOST_CONFIGARGS) $${srcdiroption} \ - || exit 1 +# libtermcap doesn't support distclean. +distclean-target-libtermcap: -.PHONY: all-etc maybe-all-etc -maybe-all-etc: -all-etc: configure-etc - @r=`${PWD_COMMAND}`; export r; \ - s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ - $(SET_LIB_PATH) \ - (cd etc && $(MAKE) $(FLAGS_TO_PASS) all) -.PHONY: check-etc maybe-check-etc -maybe-check-etc: +.PHONY: maybe-maintainer-clean-target-libtermcap maintainer-clean-target-libtermcap +maybe-maintainer-clean-target-libtermcap: -check-etc: - @r=`${PWD_COMMAND}`; export r; \ - s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ - $(SET_LIB_PATH) \ - (cd etc && $(MAKE) $(FLAGS_TO_PASS) check) +# libtermcap doesn't support maintainer-clean. +maintainer-clean-target-libtermcap: -.PHONY: install-etc maybe-install-etc -maybe-install-etc: -install-etc: installdirs - @r=`${PWD_COMMAND}`; export r; \ - s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ - $(SET_LIB_PATH) \ - (cd etc && $(MAKE) $(FLAGS_TO_PASS) install) +.PHONY: configure-target-winsup maybe-configure-target-winsup +maybe-configure-target-winsup: +# There's only one multilib.out. Cleverer subdirs shouldn't need it copied. +$(TARGET_SUBDIR)/winsup/multilib.out: multilib.out + $(SHELL) $(srcdir)/mkinstalldirs $(TARGET_SUBDIR)/winsup ; \ + rm -f $(TARGET_SUBDIR)/winsup/Makefile || : ; \ + cp multilib.out $(TARGET_SUBDIR)/winsup/multilib.out -.PHONY: configure-fastjar maybe-configure-fastjar -maybe-configure-fastjar: -configure-fastjar: - @test ! -f fastjar/Makefile || exit 0; \ - [ -d fastjar ] || mkdir fastjar; \ +configure-target-winsup: $(TARGET_SUBDIR)/winsup/multilib.out + @test ! -f $(TARGET_SUBDIR)/winsup/Makefile || exit 0; \ + $(SHELL) $(srcdir)/mkinstalldirs $(TARGET_SUBDIR)/winsup ; \ r=`${PWD_COMMAND}`; export r; \ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ - CC="$(CC)"; export CC; \ - CFLAGS="$(CFLAGS)"; export CFLAGS; \ - CONFIG_SHELL="$(SHELL)"; export CONFIG_SHELL; \ - CXX="$(CXX)"; export CXX; \ - CXXFLAGS="$(CXXFLAGS)"; export CXXFLAGS; \ - AR="$(AR)"; export AR; \ - AS="$(AS)"; export AS; \ - CC_FOR_BUILD="$(CC_FOR_BUILD)"; export CC_FOR_BUILD; \ - DLLTOOL="$(DLLTOOL)"; export DLLTOOL; \ - LD="$(LD)"; export LD; \ - NM="$(NM)"; export NM; \ - RANLIB="$(RANLIB)"; export RANLIB; \ - WINDRES="$(WINDRES)"; export WINDRES; \ - OBJCOPY="$(OBJCOPY)"; export OBJCOPY; \ - OBJDUMP="$(OBJDUMP)"; export OBJDUMP; \ - echo Configuring in fastjar; \ - cd fastjar || exit 1; \ - case $(srcdir) in \ - \.) \ - srcdiroption="--srcdir=."; \ - libsrcdir=".";; \ - /* | [A-Za-z]:[\\/]*) \ - srcdiroption="--srcdir=$(srcdir)/fastjar"; \ - libsrcdir="$$s/fastjar";; \ - *) \ - srcdiroption="--srcdir=../$(srcdir)/fastjar"; \ - libsrcdir="$$s/fastjar";; \ - esac; \ - $(SHELL) $${libsrcdir}/configure \ - $(HOST_CONFIGARGS) $${srcdiroption} \ - || exit 1 - -.PHONY: all-fastjar maybe-all-fastjar -maybe-all-fastjar: -all-fastjar: configure-fastjar - @r=`${PWD_COMMAND}`; export r; \ - s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ $(SET_LIB_PATH) \ - (cd fastjar && $(MAKE) $(FLAGS_TO_PASS) all) - -.PHONY: check-fastjar maybe-check-fastjar -maybe-check-fastjar: - -# This module is only tested in a native toolchain. -check-fastjar: - @if [ '$(host)' = '$(target)' ] ; then \ - r=`${PWD_COMMAND}`; export r; \ - s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ - $(SET_LIB_PATH) \ - (cd fastjar && $(MAKE) $(FLAGS_TO_PASS) check); \ - fi - - -.PHONY: install-fastjar maybe-install-fastjar -maybe-install-fastjar: - -install-fastjar: installdirs - @r=`${PWD_COMMAND}`; export r; \ - s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ - $(SET_LIB_PATH) \ - (cd fastjar && $(MAKE) $(FLAGS_TO_PASS) install) - - -.PHONY: configure-fileutils maybe-configure-fileutils -maybe-configure-fileutils: -configure-fileutils: - @test ! -f fileutils/Makefile || exit 0; \ - [ -d fileutils ] || mkdir fileutils; \ - r=`${PWD_COMMAND}`; export r; \ - s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ - CC="$(CC)"; export CC; \ - CFLAGS="$(CFLAGS)"; export CFLAGS; \ + AR="$(AR_FOR_TARGET)"; export AR; \ + AS="$(AS_FOR_TARGET)"; export AS; \ + CC="$(CC_FOR_TARGET)"; export CC; \ + CFLAGS="$(CFLAGS_FOR_TARGET)"; export CFLAGS; \ CONFIG_SHELL="$(SHELL)"; export CONFIG_SHELL; \ - CXX="$(CXX)"; export CXX; \ - CXXFLAGS="$(CXXFLAGS)"; export CXXFLAGS; \ - AR="$(AR)"; export AR; \ - AS="$(AS)"; export AS; \ - CC_FOR_BUILD="$(CC_FOR_BUILD)"; export CC_FOR_BUILD; \ - DLLTOOL="$(DLLTOOL)"; export DLLTOOL; \ - LD="$(LD)"; export LD; \ - NM="$(NM)"; export NM; \ - RANLIB="$(RANLIB)"; export RANLIB; \ - WINDRES="$(WINDRES)"; export WINDRES; \ - OBJCOPY="$(OBJCOPY)"; export OBJCOPY; \ - OBJDUMP="$(OBJDUMP)"; export OBJDUMP; \ - echo Configuring in fileutils; \ - cd fileutils || exit 1; \ + CPPFLAGS="$(CFLAGS_FOR_TARGET)"; export CPPFLAGS; \ + CXX="$(CXX_FOR_TARGET)"; export CXX; \ + CXXFLAGS="$(CXXFLAGS_FOR_TARGET)"; export CXXFLAGS; \ + GCJ="$(GCJ_FOR_TARGET)"; export GCJ; \ + DLLTOOL="$(DLLTOOL_FOR_TARGET)"; export DLLTOOL; \ + LD="$(LD_FOR_TARGET)"; export LD; \ + LDFLAGS="$(LDFLAGS_FOR_TARGET)"; export LDFLAGS; \ + NM="$(NM_FOR_TARGET)"; export NM; \ + RANLIB="$(RANLIB_FOR_TARGET)"; export RANLIB; \ + WINDRES="$(WINDRES_FOR_TARGET)"; export WINDRES; \ + echo Configuring in $(TARGET_SUBDIR)/winsup; \ + cd "$(TARGET_SUBDIR)/winsup" || exit 1; \ case $(srcdir) in \ - \.) \ - srcdiroption="--srcdir=."; \ - libsrcdir=".";; \ /* | [A-Za-z]:[\\/]*) \ - srcdiroption="--srcdir=$(srcdir)/fileutils"; \ - libsrcdir="$$s/fileutils";; \ + topdir=$(srcdir) ;; \ *) \ - srcdiroption="--srcdir=../$(srcdir)/fileutils"; \ - libsrcdir="$$s/fileutils";; \ + case "$(TARGET_SUBDIR)" in \ + .) topdir="../$(srcdir)" ;; \ + *) topdir="../../$(srcdir)" ;; \ + esac ;; \ esac; \ - $(SHELL) $${libsrcdir}/configure \ - $(HOST_CONFIGARGS) $${srcdiroption} \ + srcdiroption="--srcdir=$${topdir}/winsup"; \ + libsrcdir="$$s/winsup"; \ + rm -f no-such-file || : ; \ + CONFIG_SITE=no-such-file $(SHELL) $${libsrcdir}/configure \ + $(TARGET_CONFIGARGS) $${srcdiroption} \ + --with-target-subdir="$(TARGET_SUBDIR)" \ || exit 1 -.PHONY: all-fileutils maybe-all-fileutils -maybe-all-fileutils: -all-fileutils: configure-fileutils - @r=`${PWD_COMMAND}`; export r; \ - s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ - $(SET_LIB_PATH) \ - (cd fileutils && $(MAKE) $(FLAGS_TO_PASS) all) - -.PHONY: check-fileutils maybe-check-fileutils -maybe-check-fileutils: - -check-fileutils: +.PHONY: all-target-winsup maybe-all-target-winsup +maybe-all-target-winsup: +all-target-winsup: configure-target-winsup @r=`${PWD_COMMAND}`; export r; \ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ $(SET_LIB_PATH) \ - (cd fileutils && $(MAKE) $(FLAGS_TO_PASS) check) - + (cd $(TARGET_SUBDIR)/winsup && \ + $(MAKE) $(TARGET_FLAGS_TO_PASS) all) -.PHONY: install-fileutils maybe-install-fileutils -maybe-install-fileutils: +.PHONY: check-target-winsup maybe-check-target-winsup +maybe-check-target-winsup: -install-fileutils: installdirs +check-target-winsup: @r=`${PWD_COMMAND}`; export r; \ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ $(SET_LIB_PATH) \ - (cd fileutils && $(MAKE) $(FLAGS_TO_PASS) install) - - -.PHONY: configure-findutils maybe-configure-findutils -maybe-configure-findutils: -configure-findutils: - @test ! -f findutils/Makefile || exit 0; \ - [ -d findutils ] || mkdir findutils; \ - r=`${PWD_COMMAND}`; export r; \ - s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ - CC="$(CC)"; export CC; \ - CFLAGS="$(CFLAGS)"; export CFLAGS; \ - CONFIG_SHELL="$(SHELL)"; export CONFIG_SHELL; \ - CXX="$(CXX)"; export CXX; \ - CXXFLAGS="$(CXXFLAGS)"; export CXXFLAGS; \ - AR="$(AR)"; export AR; \ - AS="$(AS)"; export AS; \ - CC_FOR_BUILD="$(CC_FOR_BUILD)"; export CC_FOR_BUILD; \ - DLLTOOL="$(DLLTOOL)"; export DLLTOOL; \ - LD="$(LD)"; export LD; \ - NM="$(NM)"; export NM; \ - RANLIB="$(RANLIB)"; export RANLIB; \ - WINDRES="$(WINDRES)"; export WINDRES; \ - OBJCOPY="$(OBJCOPY)"; export OBJCOPY; \ - OBJDUMP="$(OBJDUMP)"; export OBJDUMP; \ - echo Configuring in findutils; \ - cd findutils || exit 1; \ - case $(srcdir) in \ - \.) \ - srcdiroption="--srcdir=."; \ - libsrcdir=".";; \ - /* | [A-Za-z]:[\\/]*) \ - srcdiroption="--srcdir=$(srcdir)/findutils"; \ - libsrcdir="$$s/findutils";; \ - *) \ - srcdiroption="--srcdir=../$(srcdir)/findutils"; \ - libsrcdir="$$s/findutils";; \ - esac; \ - $(SHELL) $${libsrcdir}/configure \ - $(HOST_CONFIGARGS) $${srcdiroption} \ - || exit 1 + (cd $(TARGET_SUBDIR)/winsup && \ + $(MAKE) $(TARGET_FLAGS_TO_PASS) check) -.PHONY: all-findutils maybe-all-findutils -maybe-all-findutils: -all-findutils: configure-findutils - @r=`${PWD_COMMAND}`; export r; \ - s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ - $(SET_LIB_PATH) \ - (cd findutils && $(MAKE) $(FLAGS_TO_PASS) all) -.PHONY: check-findutils maybe-check-findutils -maybe-check-findutils: +.PHONY: install-target-winsup maybe-install-target-winsup +maybe-install-target-winsup: -check-findutils: +install-target-winsup: installdirs @r=`${PWD_COMMAND}`; export r; \ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ $(SET_LIB_PATH) \ - (cd findutils && $(MAKE) $(FLAGS_TO_PASS) check) + (cd $(TARGET_SUBDIR)/winsup && \ + $(MAKE) $(TARGET_FLAGS_TO_PASS) install) -.PHONY: install-findutils maybe-install-findutils -maybe-install-findutils: - -install-findutils: installdirs - @r=`${PWD_COMMAND}`; export r; \ - s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ - $(SET_LIB_PATH) \ - (cd findutils && $(MAKE) $(FLAGS_TO_PASS) install) +# Other targets (info, dvi, etc.) +.PHONY: maybe-info-target-winsup info-target-winsup +maybe-info-target-winsup: -.PHONY: configure-find maybe-configure-find -maybe-configure-find: -configure-find: - @test ! -f find/Makefile || exit 0; \ - [ -d find ] || mkdir find; \ +info-target-winsup: \ + configure-target-winsup + @[ -f $(TARGET_SUBDIR)/winsup/Makefile ] || exit 0 ; \ r=`${PWD_COMMAND}`; export r; \ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ - CC="$(CC)"; export CC; \ - CFLAGS="$(CFLAGS)"; export CFLAGS; \ - CONFIG_SHELL="$(SHELL)"; export CONFIG_SHELL; \ - CXX="$(CXX)"; export CXX; \ - CXXFLAGS="$(CXXFLAGS)"; export CXXFLAGS; \ - AR="$(AR)"; export AR; \ - AS="$(AS)"; export AS; \ - CC_FOR_BUILD="$(CC_FOR_BUILD)"; export CC_FOR_BUILD; \ - DLLTOOL="$(DLLTOOL)"; export DLLTOOL; \ - LD="$(LD)"; export LD; \ - NM="$(NM)"; export NM; \ - RANLIB="$(RANLIB)"; export RANLIB; \ - WINDRES="$(WINDRES)"; export WINDRES; \ - OBJCOPY="$(OBJCOPY)"; export OBJCOPY; \ - OBJDUMP="$(OBJDUMP)"; export OBJDUMP; \ - echo Configuring in find; \ - cd find || exit 1; \ - case $(srcdir) in \ - \.) \ - srcdiroption="--srcdir=."; \ - libsrcdir=".";; \ - /* | [A-Za-z]:[\\/]*) \ - srcdiroption="--srcdir=$(srcdir)/find"; \ - libsrcdir="$$s/find";; \ - *) \ - srcdiroption="--srcdir=../$(srcdir)/find"; \ - libsrcdir="$$s/find";; \ - esac; \ - $(SHELL) $${libsrcdir}/configure \ - $(HOST_CONFIGARGS) $${srcdiroption} \ - || exit 1 - -.PHONY: all-find maybe-all-find -maybe-all-find: -all-find: configure-find - @r=`${PWD_COMMAND}`; export r; \ - s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ - $(SET_LIB_PATH) \ - (cd find && $(MAKE) $(FLAGS_TO_PASS) all) - -.PHONY: check-find maybe-check-find -maybe-check-find: - -check-find: - @r=`${PWD_COMMAND}`; export r; \ - s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ - $(SET_LIB_PATH) \ - (cd find && $(MAKE) $(FLAGS_TO_PASS) check) - - -.PHONY: install-find maybe-install-find -maybe-install-find: - -install-find: installdirs - @r=`${PWD_COMMAND}`; export r; \ - s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ $(SET_LIB_PATH) \ - (cd find && $(MAKE) $(FLAGS_TO_PASS) install) - - -.PHONY: configure-flex maybe-configure-flex -maybe-configure-flex: -configure-flex: - @test ! -f flex/Makefile || exit 0; \ - [ -d flex ] || mkdir flex; \ - r=`${PWD_COMMAND}`; export r; \ - s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ - CC="$(CC)"; export CC; \ - CFLAGS="$(CFLAGS)"; export CFLAGS; \ - CONFIG_SHELL="$(SHELL)"; export CONFIG_SHELL; \ - CXX="$(CXX)"; export CXX; \ - CXXFLAGS="$(CXXFLAGS)"; export CXXFLAGS; \ - AR="$(AR)"; export AR; \ - AS="$(AS)"; export AS; \ - CC_FOR_BUILD="$(CC_FOR_BUILD)"; export CC_FOR_BUILD; \ - DLLTOOL="$(DLLTOOL)"; export DLLTOOL; \ - LD="$(LD)"; export LD; \ - NM="$(NM)"; export NM; \ - RANLIB="$(RANLIB)"; export RANLIB; \ - WINDRES="$(WINDRES)"; export WINDRES; \ - OBJCOPY="$(OBJCOPY)"; export OBJCOPY; \ - OBJDUMP="$(OBJDUMP)"; export OBJDUMP; \ - echo Configuring in flex; \ - cd flex || exit 1; \ - case $(srcdir) in \ - \.) \ - srcdiroption="--srcdir=."; \ - libsrcdir=".";; \ - /* | [A-Za-z]:[\\/]*) \ - srcdiroption="--srcdir=$(srcdir)/flex"; \ - libsrcdir="$$s/flex";; \ - *) \ - srcdiroption="--srcdir=../$(srcdir)/flex"; \ - libsrcdir="$$s/flex";; \ - esac; \ - $(SHELL) $${libsrcdir}/configure \ - $(HOST_CONFIGARGS) $${srcdiroption} \ + echo "Doing info in $(TARGET_SUBDIR)/winsup" ; \ + for flag in $(EXTRA_TARGET_FLAGS); do \ + eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \ + done; \ + (cd $(TARGET_SUBDIR)/winsup && \ + $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \ + "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \ + "RANLIB=$${RANLIB}" \ + "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" \ + info) \ || exit 1 -.PHONY: all-flex maybe-all-flex -maybe-all-flex: -all-flex: configure-flex - @r=`${PWD_COMMAND}`; export r; \ - s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ - $(SET_LIB_PATH) \ - (cd flex && $(MAKE) $(FLAGS_TO_PASS) all) - -.PHONY: check-flex maybe-check-flex -maybe-check-flex: - -# This module is only tested in a native toolchain. -check-flex: - @if [ '$(host)' = '$(target)' ] ; then \ - r=`${PWD_COMMAND}`; export r; \ - s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ - $(SET_LIB_PATH) \ - (cd flex && $(MAKE) $(FLAGS_TO_PASS) check); \ - fi - - -.PHONY: install-flex maybe-install-flex -maybe-install-flex: - -install-flex: installdirs - @r=`${PWD_COMMAND}`; export r; \ - s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ - $(SET_LIB_PATH) \ - (cd flex && $(MAKE) $(FLAGS_TO_PASS) install) +.PHONY: maybe-dvi-target-winsup dvi-target-winsup +maybe-dvi-target-winsup: -.PHONY: configure-gas maybe-configure-gas -maybe-configure-gas: -configure-gas: - @test ! -f gas/Makefile || exit 0; \ - [ -d gas ] || mkdir gas; \ +dvi-target-winsup: \ + configure-target-winsup + @[ -f $(TARGET_SUBDIR)/winsup/Makefile ] || exit 0 ; \ r=`${PWD_COMMAND}`; export r; \ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ - CC="$(CC)"; export CC; \ - CFLAGS="$(CFLAGS)"; export CFLAGS; \ - CONFIG_SHELL="$(SHELL)"; export CONFIG_SHELL; \ - CXX="$(CXX)"; export CXX; \ - CXXFLAGS="$(CXXFLAGS)"; export CXXFLAGS; \ - AR="$(AR)"; export AR; \ - AS="$(AS)"; export AS; \ - CC_FOR_BUILD="$(CC_FOR_BUILD)"; export CC_FOR_BUILD; \ - DLLTOOL="$(DLLTOOL)"; export DLLTOOL; \ - LD="$(LD)"; export LD; \ - NM="$(NM)"; export NM; \ - RANLIB="$(RANLIB)"; export RANLIB; \ - WINDRES="$(WINDRES)"; export WINDRES; \ - OBJCOPY="$(OBJCOPY)"; export OBJCOPY; \ - OBJDUMP="$(OBJDUMP)"; export OBJDUMP; \ - echo Configuring in gas; \ - cd gas || exit 1; \ - case $(srcdir) in \ - \.) \ - srcdiroption="--srcdir=."; \ - libsrcdir=".";; \ - /* | [A-Za-z]:[\\/]*) \ - srcdiroption="--srcdir=$(srcdir)/gas"; \ - libsrcdir="$$s/gas";; \ - *) \ - srcdiroption="--srcdir=../$(srcdir)/gas"; \ - libsrcdir="$$s/gas";; \ - esac; \ - $(SHELL) $${libsrcdir}/configure \ - $(HOST_CONFIGARGS) $${srcdiroption} \ - || exit 1 - -.PHONY: all-gas maybe-all-gas -maybe-all-gas: -all-gas: configure-gas - @r=`${PWD_COMMAND}`; export r; \ - s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ - $(SET_LIB_PATH) \ - (cd gas && $(MAKE) $(FLAGS_TO_PASS) all) - -.PHONY: check-gas maybe-check-gas -maybe-check-gas: - -check-gas: - @r=`${PWD_COMMAND}`; export r; \ - s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ $(SET_LIB_PATH) \ - (cd gas && $(MAKE) $(FLAGS_TO_PASS) check) - - -.PHONY: install-gas maybe-install-gas -maybe-install-gas: - -install-gas: installdirs - @r=`${PWD_COMMAND}`; export r; \ - s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ - $(SET_LIB_PATH) \ - (cd gas && $(MAKE) $(FLAGS_TO_PASS) install) - - -.PHONY: configure-gawk maybe-configure-gawk -maybe-configure-gawk: -configure-gawk: - @test ! -f gawk/Makefile || exit 0; \ - [ -d gawk ] || mkdir gawk; \ - r=`${PWD_COMMAND}`; export r; \ - s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ - CC="$(CC)"; export CC; \ - CFLAGS="$(CFLAGS)"; export CFLAGS; \ - CONFIG_SHELL="$(SHELL)"; export CONFIG_SHELL; \ - CXX="$(CXX)"; export CXX; \ - CXXFLAGS="$(CXXFLAGS)"; export CXXFLAGS; \ - AR="$(AR)"; export AR; \ - AS="$(AS)"; export AS; \ - CC_FOR_BUILD="$(CC_FOR_BUILD)"; export CC_FOR_BUILD; \ - DLLTOOL="$(DLLTOOL)"; export DLLTOOL; \ - LD="$(LD)"; export LD; \ - NM="$(NM)"; export NM; \ - RANLIB="$(RANLIB)"; export RANLIB; \ - WINDRES="$(WINDRES)"; export WINDRES; \ - OBJCOPY="$(OBJCOPY)"; export OBJCOPY; \ - OBJDUMP="$(OBJDUMP)"; export OBJDUMP; \ - echo Configuring in gawk; \ - cd gawk || exit 1; \ - case $(srcdir) in \ - \.) \ - srcdiroption="--srcdir=."; \ - libsrcdir=".";; \ - /* | [A-Za-z]:[\\/]*) \ - srcdiroption="--srcdir=$(srcdir)/gawk"; \ - libsrcdir="$$s/gawk";; \ - *) \ - srcdiroption="--srcdir=../$(srcdir)/gawk"; \ - libsrcdir="$$s/gawk";; \ - esac; \ - $(SHELL) $${libsrcdir}/configure \ - $(HOST_CONFIGARGS) $${srcdiroption} \ + echo "Doing dvi in $(TARGET_SUBDIR)/winsup" ; \ + for flag in $(EXTRA_TARGET_FLAGS); do \ + eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \ + done; \ + (cd $(TARGET_SUBDIR)/winsup && \ + $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \ + "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \ + "RANLIB=$${RANLIB}" \ + "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" \ + dvi) \ || exit 1 -.PHONY: all-gawk maybe-all-gawk -maybe-all-gawk: -all-gawk: configure-gawk - @r=`${PWD_COMMAND}`; export r; \ - s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ - $(SET_LIB_PATH) \ - (cd gawk && $(MAKE) $(FLAGS_TO_PASS) all) - -.PHONY: check-gawk maybe-check-gawk -maybe-check-gawk: - -check-gawk: - @r=`${PWD_COMMAND}`; export r; \ - s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ - $(SET_LIB_PATH) \ - (cd gawk && $(MAKE) $(FLAGS_TO_PASS) check) - - -.PHONY: install-gawk maybe-install-gawk -maybe-install-gawk: - -install-gawk: installdirs - @r=`${PWD_COMMAND}`; export r; \ - s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ - $(SET_LIB_PATH) \ - (cd gawk && $(MAKE) $(FLAGS_TO_PASS) install) +.PHONY: maybe-TAGS-target-winsup TAGS-target-winsup +maybe-TAGS-target-winsup: -.PHONY: configure-gettext maybe-configure-gettext -maybe-configure-gettext: -configure-gettext: - @test ! -f gettext/Makefile || exit 0; \ - [ -d gettext ] || mkdir gettext; \ +TAGS-target-winsup: \ + configure-target-winsup + @[ -f $(TARGET_SUBDIR)/winsup/Makefile ] || exit 0 ; \ r=`${PWD_COMMAND}`; export r; \ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ - CC="$(CC)"; export CC; \ - CFLAGS="$(CFLAGS)"; export CFLAGS; \ - CONFIG_SHELL="$(SHELL)"; export CONFIG_SHELL; \ - CXX="$(CXX)"; export CXX; \ - CXXFLAGS="$(CXXFLAGS)"; export CXXFLAGS; \ - AR="$(AR)"; export AR; \ - AS="$(AS)"; export AS; \ - CC_FOR_BUILD="$(CC_FOR_BUILD)"; export CC_FOR_BUILD; \ - DLLTOOL="$(DLLTOOL)"; export DLLTOOL; \ - LD="$(LD)"; export LD; \ - NM="$(NM)"; export NM; \ - RANLIB="$(RANLIB)"; export RANLIB; \ - WINDRES="$(WINDRES)"; export WINDRES; \ - OBJCOPY="$(OBJCOPY)"; export OBJCOPY; \ - OBJDUMP="$(OBJDUMP)"; export OBJDUMP; \ - echo Configuring in gettext; \ - cd gettext || exit 1; \ - case $(srcdir) in \ - \.) \ - srcdiroption="--srcdir=."; \ - libsrcdir=".";; \ - /* | [A-Za-z]:[\\/]*) \ - srcdiroption="--srcdir=$(srcdir)/gettext"; \ - libsrcdir="$$s/gettext";; \ - *) \ - srcdiroption="--srcdir=../$(srcdir)/gettext"; \ - libsrcdir="$$s/gettext";; \ - esac; \ - $(SHELL) $${libsrcdir}/configure \ - $(HOST_CONFIGARGS) $${srcdiroption} \ - || exit 1 - -.PHONY: all-gettext maybe-all-gettext -maybe-all-gettext: -all-gettext: configure-gettext - @r=`${PWD_COMMAND}`; export r; \ - s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ - $(SET_LIB_PATH) \ - (cd gettext && $(MAKE) $(FLAGS_TO_PASS) all) - -.PHONY: check-gettext maybe-check-gettext -maybe-check-gettext: - -check-gettext: - @r=`${PWD_COMMAND}`; export r; \ - s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ - $(SET_LIB_PATH) \ - (cd gettext && $(MAKE) $(FLAGS_TO_PASS) check) - - -.PHONY: install-gettext maybe-install-gettext -maybe-install-gettext: - -install-gettext: installdirs - @r=`${PWD_COMMAND}`; export r; \ - s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ $(SET_LIB_PATH) \ - (cd gettext && $(MAKE) $(FLAGS_TO_PASS) install) - - -.PHONY: configure-gnuserv maybe-configure-gnuserv -maybe-configure-gnuserv: -configure-gnuserv: - @test ! -f gnuserv/Makefile || exit 0; \ - [ -d gnuserv ] || mkdir gnuserv; \ - r=`${PWD_COMMAND}`; export r; \ - s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ - CC="$(CC)"; export CC; \ - CFLAGS="$(CFLAGS)"; export CFLAGS; \ - CONFIG_SHELL="$(SHELL)"; export CONFIG_SHELL; \ - CXX="$(CXX)"; export CXX; \ - CXXFLAGS="$(CXXFLAGS)"; export CXXFLAGS; \ - AR="$(AR)"; export AR; \ - AS="$(AS)"; export AS; \ - CC_FOR_BUILD="$(CC_FOR_BUILD)"; export CC_FOR_BUILD; \ - DLLTOOL="$(DLLTOOL)"; export DLLTOOL; \ - LD="$(LD)"; export LD; \ - NM="$(NM)"; export NM; \ - RANLIB="$(RANLIB)"; export RANLIB; \ - WINDRES="$(WINDRES)"; export WINDRES; \ - OBJCOPY="$(OBJCOPY)"; export OBJCOPY; \ - OBJDUMP="$(OBJDUMP)"; export OBJDUMP; \ - echo Configuring in gnuserv; \ - cd gnuserv || exit 1; \ - case $(srcdir) in \ - \.) \ - srcdiroption="--srcdir=."; \ - libsrcdir=".";; \ - /* | [A-Za-z]:[\\/]*) \ - srcdiroption="--srcdir=$(srcdir)/gnuserv"; \ - libsrcdir="$$s/gnuserv";; \ - *) \ - srcdiroption="--srcdir=../$(srcdir)/gnuserv"; \ - libsrcdir="$$s/gnuserv";; \ - esac; \ - $(SHELL) $${libsrcdir}/configure \ - $(HOST_CONFIGARGS) $${srcdiroption} \ + echo "Doing TAGS in $(TARGET_SUBDIR)/winsup" ; \ + for flag in $(EXTRA_TARGET_FLAGS); do \ + eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \ + done; \ + (cd $(TARGET_SUBDIR)/winsup && \ + $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \ + "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \ + "RANLIB=$${RANLIB}" \ + "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" \ + TAGS) \ || exit 1 -.PHONY: all-gnuserv maybe-all-gnuserv -maybe-all-gnuserv: -all-gnuserv: configure-gnuserv - @r=`${PWD_COMMAND}`; export r; \ - s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ - $(SET_LIB_PATH) \ - (cd gnuserv && $(MAKE) $(FLAGS_TO_PASS) all) - -.PHONY: check-gnuserv maybe-check-gnuserv -maybe-check-gnuserv: - -check-gnuserv: - @r=`${PWD_COMMAND}`; export r; \ - s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ - $(SET_LIB_PATH) \ - (cd gnuserv && $(MAKE) $(FLAGS_TO_PASS) check) - - -.PHONY: install-gnuserv maybe-install-gnuserv -maybe-install-gnuserv: - -install-gnuserv: installdirs - @r=`${PWD_COMMAND}`; export r; \ - s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ - $(SET_LIB_PATH) \ - (cd gnuserv && $(MAKE) $(FLAGS_TO_PASS) install) +.PHONY: maybe-install-info-target-winsup install-info-target-winsup +maybe-install-info-target-winsup: -.PHONY: configure-gprof maybe-configure-gprof -maybe-configure-gprof: -configure-gprof: - @test ! -f gprof/Makefile || exit 0; \ - [ -d gprof ] || mkdir gprof; \ +install-info-target-winsup: \ + configure-target-winsup \ + info-target-winsup + @[ -f $(TARGET_SUBDIR)/winsup/Makefile ] || exit 0 ; \ r=`${PWD_COMMAND}`; export r; \ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ - CC="$(CC)"; export CC; \ - CFLAGS="$(CFLAGS)"; export CFLAGS; \ - CONFIG_SHELL="$(SHELL)"; export CONFIG_SHELL; \ - CXX="$(CXX)"; export CXX; \ - CXXFLAGS="$(CXXFLAGS)"; export CXXFLAGS; \ - AR="$(AR)"; export AR; \ - AS="$(AS)"; export AS; \ - CC_FOR_BUILD="$(CC_FOR_BUILD)"; export CC_FOR_BUILD; \ - DLLTOOL="$(DLLTOOL)"; export DLLTOOL; \ - LD="$(LD)"; export LD; \ - NM="$(NM)"; export NM; \ - RANLIB="$(RANLIB)"; export RANLIB; \ - WINDRES="$(WINDRES)"; export WINDRES; \ - OBJCOPY="$(OBJCOPY)"; export OBJCOPY; \ - OBJDUMP="$(OBJDUMP)"; export OBJDUMP; \ - echo Configuring in gprof; \ - cd gprof || exit 1; \ - case $(srcdir) in \ - \.) \ - srcdiroption="--srcdir=."; \ - libsrcdir=".";; \ - /* | [A-Za-z]:[\\/]*) \ - srcdiroption="--srcdir=$(srcdir)/gprof"; \ - libsrcdir="$$s/gprof";; \ - *) \ - srcdiroption="--srcdir=../$(srcdir)/gprof"; \ - libsrcdir="$$s/gprof";; \ - esac; \ - $(SHELL) $${libsrcdir}/configure \ - $(HOST_CONFIGARGS) $${srcdiroption} \ - || exit 1 - -.PHONY: all-gprof maybe-all-gprof -maybe-all-gprof: -all-gprof: configure-gprof - @r=`${PWD_COMMAND}`; export r; \ - s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ $(SET_LIB_PATH) \ - (cd gprof && $(MAKE) $(FLAGS_TO_PASS) all) - -.PHONY: check-gprof maybe-check-gprof -maybe-check-gprof: - -check-gprof: - @r=`${PWD_COMMAND}`; export r; \ - s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ - $(SET_LIB_PATH) \ - (cd gprof && $(MAKE) $(FLAGS_TO_PASS) check) - - -.PHONY: install-gprof maybe-install-gprof -maybe-install-gprof: - -install-gprof: installdirs - @r=`${PWD_COMMAND}`; export r; \ - s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ - $(SET_LIB_PATH) \ - (cd gprof && $(MAKE) $(FLAGS_TO_PASS) install) - - -.PHONY: configure-gzip maybe-configure-gzip -maybe-configure-gzip: -configure-gzip: - @test ! -f gzip/Makefile || exit 0; \ - [ -d gzip ] || mkdir gzip; \ - r=`${PWD_COMMAND}`; export r; \ - s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ - CC="$(CC)"; export CC; \ - CFLAGS="$(CFLAGS)"; export CFLAGS; \ - CONFIG_SHELL="$(SHELL)"; export CONFIG_SHELL; \ - CXX="$(CXX)"; export CXX; \ - CXXFLAGS="$(CXXFLAGS)"; export CXXFLAGS; \ - AR="$(AR)"; export AR; \ - AS="$(AS)"; export AS; \ - CC_FOR_BUILD="$(CC_FOR_BUILD)"; export CC_FOR_BUILD; \ - DLLTOOL="$(DLLTOOL)"; export DLLTOOL; \ - LD="$(LD)"; export LD; \ - NM="$(NM)"; export NM; \ - RANLIB="$(RANLIB)"; export RANLIB; \ - WINDRES="$(WINDRES)"; export WINDRES; \ - OBJCOPY="$(OBJCOPY)"; export OBJCOPY; \ - OBJDUMP="$(OBJDUMP)"; export OBJDUMP; \ - echo Configuring in gzip; \ - cd gzip || exit 1; \ - case $(srcdir) in \ - \.) \ - srcdiroption="--srcdir=."; \ - libsrcdir=".";; \ - /* | [A-Za-z]:[\\/]*) \ - srcdiroption="--srcdir=$(srcdir)/gzip"; \ - libsrcdir="$$s/gzip";; \ - *) \ - srcdiroption="--srcdir=../$(srcdir)/gzip"; \ - libsrcdir="$$s/gzip";; \ - esac; \ - $(SHELL) $${libsrcdir}/configure \ - $(HOST_CONFIGARGS) $${srcdiroption} \ + echo "Doing install-info in $(TARGET_SUBDIR)/winsup" ; \ + for flag in $(EXTRA_TARGET_FLAGS); do \ + eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \ + done; \ + (cd $(TARGET_SUBDIR)/winsup && \ + $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \ + "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \ + "RANLIB=$${RANLIB}" \ + "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" \ + install-info) \ || exit 1 -.PHONY: all-gzip maybe-all-gzip -maybe-all-gzip: -all-gzip: configure-gzip - @r=`${PWD_COMMAND}`; export r; \ - s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ - $(SET_LIB_PATH) \ - (cd gzip && $(MAKE) $(FLAGS_TO_PASS) all) - -.PHONY: check-gzip maybe-check-gzip -maybe-check-gzip: - -check-gzip: - @r=`${PWD_COMMAND}`; export r; \ - s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ - $(SET_LIB_PATH) \ - (cd gzip && $(MAKE) $(FLAGS_TO_PASS) check) - - -.PHONY: install-gzip maybe-install-gzip -maybe-install-gzip: - -install-gzip: installdirs - @r=`${PWD_COMMAND}`; export r; \ - s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ - $(SET_LIB_PATH) \ - (cd gzip && $(MAKE) $(FLAGS_TO_PASS) install) +.PHONY: maybe-installcheck-target-winsup installcheck-target-winsup +maybe-installcheck-target-winsup: -.PHONY: configure-hello maybe-configure-hello -maybe-configure-hello: -configure-hello: - @test ! -f hello/Makefile || exit 0; \ - [ -d hello ] || mkdir hello; \ +installcheck-target-winsup: \ + configure-target-winsup + @[ -f $(TARGET_SUBDIR)/winsup/Makefile ] || exit 0 ; \ r=`${PWD_COMMAND}`; export r; \ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ - CC="$(CC)"; export CC; \ - CFLAGS="$(CFLAGS)"; export CFLAGS; \ - CONFIG_SHELL="$(SHELL)"; export CONFIG_SHELL; \ - CXX="$(CXX)"; export CXX; \ - CXXFLAGS="$(CXXFLAGS)"; export CXXFLAGS; \ - AR="$(AR)"; export AR; \ - AS="$(AS)"; export AS; \ - CC_FOR_BUILD="$(CC_FOR_BUILD)"; export CC_FOR_BUILD; \ - DLLTOOL="$(DLLTOOL)"; export DLLTOOL; \ - LD="$(LD)"; export LD; \ - NM="$(NM)"; export NM; \ - RANLIB="$(RANLIB)"; export RANLIB; \ - WINDRES="$(WINDRES)"; export WINDRES; \ - OBJCOPY="$(OBJCOPY)"; export OBJCOPY; \ - OBJDUMP="$(OBJDUMP)"; export OBJDUMP; \ - echo Configuring in hello; \ - cd hello || exit 1; \ - case $(srcdir) in \ - \.) \ - srcdiroption="--srcdir=."; \ - libsrcdir=".";; \ - /* | [A-Za-z]:[\\/]*) \ - srcdiroption="--srcdir=$(srcdir)/hello"; \ - libsrcdir="$$s/hello";; \ - *) \ - srcdiroption="--srcdir=../$(srcdir)/hello"; \ - libsrcdir="$$s/hello";; \ - esac; \ - $(SHELL) $${libsrcdir}/configure \ - $(HOST_CONFIGARGS) $${srcdiroption} \ - || exit 1 - -.PHONY: all-hello maybe-all-hello -maybe-all-hello: -all-hello: configure-hello - @r=`${PWD_COMMAND}`; export r; \ - s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ - $(SET_LIB_PATH) \ - (cd hello && $(MAKE) $(FLAGS_TO_PASS) all) - -.PHONY: check-hello maybe-check-hello -maybe-check-hello: - -check-hello: - @r=`${PWD_COMMAND}`; export r; \ - s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ $(SET_LIB_PATH) \ - (cd hello && $(MAKE) $(FLAGS_TO_PASS) check) - - -.PHONY: install-hello maybe-install-hello -maybe-install-hello: - -install-hello: installdirs - @r=`${PWD_COMMAND}`; export r; \ - s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ - $(SET_LIB_PATH) \ - (cd hello && $(MAKE) $(FLAGS_TO_PASS) install) - - -.PHONY: configure-indent maybe-configure-indent -maybe-configure-indent: -configure-indent: - @test ! -f indent/Makefile || exit 0; \ - [ -d indent ] || mkdir indent; \ - r=`${PWD_COMMAND}`; export r; \ - s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ - CC="$(CC)"; export CC; \ - CFLAGS="$(CFLAGS)"; export CFLAGS; \ - CONFIG_SHELL="$(SHELL)"; export CONFIG_SHELL; \ - CXX="$(CXX)"; export CXX; \ - CXXFLAGS="$(CXXFLAGS)"; export CXXFLAGS; \ - AR="$(AR)"; export AR; \ - AS="$(AS)"; export AS; \ - CC_FOR_BUILD="$(CC_FOR_BUILD)"; export CC_FOR_BUILD; \ - DLLTOOL="$(DLLTOOL)"; export DLLTOOL; \ - LD="$(LD)"; export LD; \ - NM="$(NM)"; export NM; \ - RANLIB="$(RANLIB)"; export RANLIB; \ - WINDRES="$(WINDRES)"; export WINDRES; \ - OBJCOPY="$(OBJCOPY)"; export OBJCOPY; \ - OBJDUMP="$(OBJDUMP)"; export OBJDUMP; \ - echo Configuring in indent; \ - cd indent || exit 1; \ - case $(srcdir) in \ - \.) \ - srcdiroption="--srcdir=."; \ - libsrcdir=".";; \ - /* | [A-Za-z]:[\\/]*) \ - srcdiroption="--srcdir=$(srcdir)/indent"; \ - libsrcdir="$$s/indent";; \ - *) \ - srcdiroption="--srcdir=../$(srcdir)/indent"; \ - libsrcdir="$$s/indent";; \ - esac; \ - $(SHELL) $${libsrcdir}/configure \ - $(HOST_CONFIGARGS) $${srcdiroption} \ + echo "Doing installcheck in $(TARGET_SUBDIR)/winsup" ; \ + for flag in $(EXTRA_TARGET_FLAGS); do \ + eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \ + done; \ + (cd $(TARGET_SUBDIR)/winsup && \ + $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \ + "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \ + "RANLIB=$${RANLIB}" \ + "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" \ + installcheck) \ || exit 1 -.PHONY: all-indent maybe-all-indent -maybe-all-indent: -all-indent: configure-indent - @r=`${PWD_COMMAND}`; export r; \ - s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ - $(SET_LIB_PATH) \ - (cd indent && $(MAKE) $(FLAGS_TO_PASS) all) - -.PHONY: check-indent maybe-check-indent -maybe-check-indent: - -check-indent: - @r=`${PWD_COMMAND}`; export r; \ - s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ - $(SET_LIB_PATH) \ - (cd indent && $(MAKE) $(FLAGS_TO_PASS) check) - - -.PHONY: install-indent maybe-install-indent -maybe-install-indent: - -install-indent: installdirs - @r=`${PWD_COMMAND}`; export r; \ - s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ - $(SET_LIB_PATH) \ - (cd indent && $(MAKE) $(FLAGS_TO_PASS) install) +.PHONY: maybe-mostlyclean-target-winsup mostlyclean-target-winsup +maybe-mostlyclean-target-winsup: -.PHONY: configure-intl maybe-configure-intl -maybe-configure-intl: -configure-intl: - @test ! -f intl/Makefile || exit 0; \ - [ -d intl ] || mkdir intl; \ +mostlyclean-target-winsup: + @[ -f $(TARGET_SUBDIR)/winsup/Makefile ] || exit 0 ; \ r=`${PWD_COMMAND}`; export r; \ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ - CC="$(CC)"; export CC; \ - CFLAGS="$(CFLAGS)"; export CFLAGS; \ - CONFIG_SHELL="$(SHELL)"; export CONFIG_SHELL; \ - CXX="$(CXX)"; export CXX; \ - CXXFLAGS="$(CXXFLAGS)"; export CXXFLAGS; \ - AR="$(AR)"; export AR; \ - AS="$(AS)"; export AS; \ - CC_FOR_BUILD="$(CC_FOR_BUILD)"; export CC_FOR_BUILD; \ - DLLTOOL="$(DLLTOOL)"; export DLLTOOL; \ - LD="$(LD)"; export LD; \ - NM="$(NM)"; export NM; \ - RANLIB="$(RANLIB)"; export RANLIB; \ - WINDRES="$(WINDRES)"; export WINDRES; \ - OBJCOPY="$(OBJCOPY)"; export OBJCOPY; \ - OBJDUMP="$(OBJDUMP)"; export OBJDUMP; \ - echo Configuring in intl; \ - cd intl || exit 1; \ - case $(srcdir) in \ - \.) \ - srcdiroption="--srcdir=."; \ - libsrcdir=".";; \ - /* | [A-Za-z]:[\\/]*) \ - srcdiroption="--srcdir=$(srcdir)/intl"; \ - libsrcdir="$$s/intl";; \ - *) \ - srcdiroption="--srcdir=../$(srcdir)/intl"; \ - libsrcdir="$$s/intl";; \ - esac; \ - $(SHELL) $${libsrcdir}/configure \ - $(HOST_CONFIGARGS) $${srcdiroption} \ - || exit 1 - -.PHONY: all-intl maybe-all-intl -maybe-all-intl: -all-intl: configure-intl - @r=`${PWD_COMMAND}`; export r; \ - s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ - $(SET_LIB_PATH) \ - (cd intl && $(MAKE) $(FLAGS_TO_PASS) all) - -.PHONY: check-intl maybe-check-intl -maybe-check-intl: - -check-intl: - @r=`${PWD_COMMAND}`; export r; \ - s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ $(SET_LIB_PATH) \ - (cd intl && $(MAKE) $(FLAGS_TO_PASS) check) - - -.PHONY: install-intl maybe-install-intl -maybe-install-intl: - -install-intl: installdirs - @r=`${PWD_COMMAND}`; export r; \ - s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ - $(SET_LIB_PATH) \ - (cd intl && $(MAKE) $(FLAGS_TO_PASS) install) - - -.PHONY: configure-tcl maybe-configure-tcl -maybe-configure-tcl: -configure-tcl: - @test ! -f tcl/Makefile || exit 0; \ - [ -d tcl ] || mkdir tcl; \ - r=`${PWD_COMMAND}`; export r; \ - s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ - CC="$(CC)"; export CC; \ - CFLAGS="$(CFLAGS)"; export CFLAGS; \ - CONFIG_SHELL="$(SHELL)"; export CONFIG_SHELL; \ - CXX="$(CXX)"; export CXX; \ - CXXFLAGS="$(CXXFLAGS)"; export CXXFLAGS; \ - AR="$(AR)"; export AR; \ - AS="$(AS)"; export AS; \ - CC_FOR_BUILD="$(CC_FOR_BUILD)"; export CC_FOR_BUILD; \ - DLLTOOL="$(DLLTOOL)"; export DLLTOOL; \ - LD="$(LD)"; export LD; \ - NM="$(NM)"; export NM; \ - RANLIB="$(RANLIB)"; export RANLIB; \ - WINDRES="$(WINDRES)"; export WINDRES; \ - OBJCOPY="$(OBJCOPY)"; export OBJCOPY; \ - OBJDUMP="$(OBJDUMP)"; export OBJDUMP; \ - echo Configuring in tcl; \ - cd tcl || exit 1; \ - case $(srcdir) in \ - \.) \ - srcdiroption="--srcdir=."; \ - libsrcdir=".";; \ - /* | [A-Za-z]:[\\/]*) \ - srcdiroption="--srcdir=$(srcdir)/tcl"; \ - libsrcdir="$$s/tcl";; \ - *) \ - srcdiroption="--srcdir=../$(srcdir)/tcl"; \ - libsrcdir="$$s/tcl";; \ - esac; \ - $(SHELL) $${libsrcdir}/configure \ - $(HOST_CONFIGARGS) $${srcdiroption} \ + echo "Doing mostlyclean in $(TARGET_SUBDIR)/winsup" ; \ + for flag in $(EXTRA_TARGET_FLAGS); do \ + eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \ + done; \ + (cd $(TARGET_SUBDIR)/winsup && \ + $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \ + "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \ + "RANLIB=$${RANLIB}" \ + "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" \ + mostlyclean) \ || exit 1 -.PHONY: all-tcl maybe-all-tcl -maybe-all-tcl: -all-tcl: configure-tcl - @r=`${PWD_COMMAND}`; export r; \ - s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ - $(SET_LIB_PATH) \ - (cd tcl && $(MAKE) $(FLAGS_TO_PASS) all) -.PHONY: check-tcl maybe-check-tcl -maybe-check-tcl: +.PHONY: maybe-clean-target-winsup clean-target-winsup +maybe-clean-target-winsup: -check-tcl: - @r=`${PWD_COMMAND}`; export r; \ +clean-target-winsup: + @[ -f $(TARGET_SUBDIR)/winsup/Makefile ] || exit 0 ; \ + r=`${PWD_COMMAND}`; export r; \ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ $(SET_LIB_PATH) \ - (cd tcl && $(MAKE) $(FLAGS_TO_PASS) check) - - -.PHONY: install-tcl maybe-install-tcl -maybe-install-tcl: + echo "Doing clean in $(TARGET_SUBDIR)/winsup" ; \ + for flag in $(EXTRA_TARGET_FLAGS); do \ + eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \ + done; \ + (cd $(TARGET_SUBDIR)/winsup && \ + $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \ + "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \ + "RANLIB=$${RANLIB}" \ + "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" \ + clean) \ + || exit 1 -install-tcl: installdirs - @r=`${PWD_COMMAND}`; export r; \ - s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ - $(SET_LIB_PATH) \ - (cd tcl && $(MAKE) $(FLAGS_TO_PASS) install) +.PHONY: maybe-distclean-target-winsup distclean-target-winsup +maybe-distclean-target-winsup: -.PHONY: configure-itcl maybe-configure-itcl -maybe-configure-itcl: -configure-itcl: - @test ! -f itcl/Makefile || exit 0; \ - [ -d itcl ] || mkdir itcl; \ +distclean-target-winsup: + @[ -f $(TARGET_SUBDIR)/winsup/Makefile ] || exit 0 ; \ r=`${PWD_COMMAND}`; export r; \ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ - CC="$(CC)"; export CC; \ - CFLAGS="$(CFLAGS)"; export CFLAGS; \ - CONFIG_SHELL="$(SHELL)"; export CONFIG_SHELL; \ - CXX="$(CXX)"; export CXX; \ - CXXFLAGS="$(CXXFLAGS)"; export CXXFLAGS; \ - AR="$(AR)"; export AR; \ - AS="$(AS)"; export AS; \ - CC_FOR_BUILD="$(CC_FOR_BUILD)"; export CC_FOR_BUILD; \ - DLLTOOL="$(DLLTOOL)"; export DLLTOOL; \ - LD="$(LD)"; export LD; \ - NM="$(NM)"; export NM; \ - RANLIB="$(RANLIB)"; export RANLIB; \ - WINDRES="$(WINDRES)"; export WINDRES; \ - OBJCOPY="$(OBJCOPY)"; export OBJCOPY; \ - OBJDUMP="$(OBJDUMP)"; export OBJDUMP; \ - echo Configuring in itcl; \ - cd itcl || exit 1; \ - case $(srcdir) in \ - \.) \ - srcdiroption="--srcdir=."; \ - libsrcdir=".";; \ - /* | [A-Za-z]:[\\/]*) \ - srcdiroption="--srcdir=$(srcdir)/itcl"; \ - libsrcdir="$$s/itcl";; \ - *) \ - srcdiroption="--srcdir=../$(srcdir)/itcl"; \ - libsrcdir="$$s/itcl";; \ - esac; \ - $(SHELL) $${libsrcdir}/configure \ - $(HOST_CONFIGARGS) $${srcdiroption} \ + $(SET_LIB_PATH) \ + echo "Doing distclean in $(TARGET_SUBDIR)/winsup" ; \ + for flag in $(EXTRA_TARGET_FLAGS); do \ + eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \ + done; \ + (cd $(TARGET_SUBDIR)/winsup && \ + $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \ + "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \ + "RANLIB=$${RANLIB}" \ + "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" \ + distclean) \ || exit 1 -.PHONY: all-itcl maybe-all-itcl -maybe-all-itcl: -all-itcl: configure-itcl - @r=`${PWD_COMMAND}`; export r; \ - s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ - $(SET_LIB_PATH) \ - (cd itcl && $(MAKE) $(FLAGS_TO_PASS) all) -.PHONY: check-itcl maybe-check-itcl -maybe-check-itcl: +.PHONY: maybe-maintainer-clean-target-winsup maintainer-clean-target-winsup +maybe-maintainer-clean-target-winsup: -check-itcl: - @r=`${PWD_COMMAND}`; export r; \ +maintainer-clean-target-winsup: + @[ -f $(TARGET_SUBDIR)/winsup/Makefile ] || exit 0 ; \ + r=`${PWD_COMMAND}`; export r; \ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ $(SET_LIB_PATH) \ - (cd itcl && $(MAKE) $(FLAGS_TO_PASS) check) + echo "Doing maintainer-clean in $(TARGET_SUBDIR)/winsup" ; \ + for flag in $(EXTRA_TARGET_FLAGS); do \ + eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \ + done; \ + (cd $(TARGET_SUBDIR)/winsup && \ + $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \ + "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \ + "RANLIB=$${RANLIB}" \ + "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" \ + maintainer-clean) \ + || exit 1 -.PHONY: install-itcl maybe-install-itcl -maybe-install-itcl: -install-itcl: installdirs - @r=`${PWD_COMMAND}`; export r; \ - s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ - $(SET_LIB_PATH) \ - (cd itcl && $(MAKE) $(FLAGS_TO_PASS) install) +.PHONY: configure-target-libgloss maybe-configure-target-libgloss +maybe-configure-target-libgloss: +# There's only one multilib.out. Cleverer subdirs shouldn't need it copied. +$(TARGET_SUBDIR)/libgloss/multilib.out: multilib.out + $(SHELL) $(srcdir)/mkinstalldirs $(TARGET_SUBDIR)/libgloss ; \ + rm -f $(TARGET_SUBDIR)/libgloss/Makefile || : ; \ + cp multilib.out $(TARGET_SUBDIR)/libgloss/multilib.out -.PHONY: configure-ld maybe-configure-ld -maybe-configure-ld: -configure-ld: - @test ! -f ld/Makefile || exit 0; \ - [ -d ld ] || mkdir ld; \ +configure-target-libgloss: $(TARGET_SUBDIR)/libgloss/multilib.out + @test ! -f $(TARGET_SUBDIR)/libgloss/Makefile || exit 0; \ + $(SHELL) $(srcdir)/mkinstalldirs $(TARGET_SUBDIR)/libgloss ; \ r=`${PWD_COMMAND}`; export r; \ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ - CC="$(CC)"; export CC; \ - CFLAGS="$(CFLAGS)"; export CFLAGS; \ + $(SET_LIB_PATH) \ + AR="$(AR_FOR_TARGET)"; export AR; \ + AS="$(AS_FOR_TARGET)"; export AS; \ + CC="$(CC_FOR_TARGET)"; export CC; \ + CFLAGS="$(CFLAGS_FOR_TARGET)"; export CFLAGS; \ CONFIG_SHELL="$(SHELL)"; export CONFIG_SHELL; \ - CXX="$(CXX)"; export CXX; \ - CXXFLAGS="$(CXXFLAGS)"; export CXXFLAGS; \ - AR="$(AR)"; export AR; \ - AS="$(AS)"; export AS; \ - CC_FOR_BUILD="$(CC_FOR_BUILD)"; export CC_FOR_BUILD; \ - DLLTOOL="$(DLLTOOL)"; export DLLTOOL; \ - LD="$(LD)"; export LD; \ - NM="$(NM)"; export NM; \ - RANLIB="$(RANLIB)"; export RANLIB; \ - WINDRES="$(WINDRES)"; export WINDRES; \ - OBJCOPY="$(OBJCOPY)"; export OBJCOPY; \ - OBJDUMP="$(OBJDUMP)"; export OBJDUMP; \ - echo Configuring in ld; \ - cd ld || exit 1; \ + CPPFLAGS="$(CFLAGS_FOR_TARGET)"; export CPPFLAGS; \ + CXX="$(CXX_FOR_TARGET)"; export CXX; \ + CXXFLAGS="$(CXXFLAGS_FOR_TARGET)"; export CXXFLAGS; \ + GCJ="$(GCJ_FOR_TARGET)"; export GCJ; \ + DLLTOOL="$(DLLTOOL_FOR_TARGET)"; export DLLTOOL; \ + LD="$(LD_FOR_TARGET)"; export LD; \ + LDFLAGS="$(LDFLAGS_FOR_TARGET)"; export LDFLAGS; \ + NM="$(NM_FOR_TARGET)"; export NM; \ + RANLIB="$(RANLIB_FOR_TARGET)"; export RANLIB; \ + WINDRES="$(WINDRES_FOR_TARGET)"; export WINDRES; \ + echo Configuring in $(TARGET_SUBDIR)/libgloss; \ + cd "$(TARGET_SUBDIR)/libgloss" || exit 1; \ case $(srcdir) in \ - \.) \ - srcdiroption="--srcdir=."; \ - libsrcdir=".";; \ /* | [A-Za-z]:[\\/]*) \ - srcdiroption="--srcdir=$(srcdir)/ld"; \ - libsrcdir="$$s/ld";; \ + topdir=$(srcdir) ;; \ *) \ - srcdiroption="--srcdir=../$(srcdir)/ld"; \ - libsrcdir="$$s/ld";; \ + case "$(TARGET_SUBDIR)" in \ + .) topdir="../$(srcdir)" ;; \ + *) topdir="../../$(srcdir)" ;; \ + esac ;; \ esac; \ - $(SHELL) $${libsrcdir}/configure \ - $(HOST_CONFIGARGS) $${srcdiroption} \ + srcdiroption="--srcdir=$${topdir}/libgloss"; \ + libsrcdir="$$s/libgloss"; \ + rm -f no-such-file || : ; \ + CONFIG_SITE=no-such-file $(SHELL) $${libsrcdir}/configure \ + $(TARGET_CONFIGARGS) $${srcdiroption} \ + --with-target-subdir="$(TARGET_SUBDIR)" \ || exit 1 -.PHONY: all-ld maybe-all-ld -maybe-all-ld: -all-ld: configure-ld - @r=`${PWD_COMMAND}`; export r; \ - s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ - $(SET_LIB_PATH) \ - (cd ld && $(MAKE) $(FLAGS_TO_PASS) all) - -.PHONY: check-ld maybe-check-ld -maybe-check-ld: - -check-ld: - @r=`${PWD_COMMAND}`; export r; \ - s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ - $(SET_LIB_PATH) \ - (cd ld && $(MAKE) $(FLAGS_TO_PASS) check) - - -.PHONY: install-ld maybe-install-ld -maybe-install-ld: - -install-ld: installdirs +.PHONY: all-target-libgloss maybe-all-target-libgloss +maybe-all-target-libgloss: +all-target-libgloss: configure-target-libgloss @r=`${PWD_COMMAND}`; export r; \ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ $(SET_LIB_PATH) \ - (cd ld && $(MAKE) $(FLAGS_TO_PASS) install) + (cd $(TARGET_SUBDIR)/libgloss && \ + $(MAKE) $(TARGET_FLAGS_TO_PASS) all) +.PHONY: check-target-libgloss maybe-check-target-libgloss +maybe-check-target-libgloss: -.PHONY: configure-libgui maybe-configure-libgui -maybe-configure-libgui: -configure-libgui: - @test ! -f libgui/Makefile || exit 0; \ - [ -d libgui ] || mkdir libgui; \ - r=`${PWD_COMMAND}`; export r; \ - s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ - CC="$(CC)"; export CC; \ - CFLAGS="$(CFLAGS)"; export CFLAGS; \ - CONFIG_SHELL="$(SHELL)"; export CONFIG_SHELL; \ - CXX="$(CXX)"; export CXX; \ - CXXFLAGS="$(CXXFLAGS)"; export CXXFLAGS; \ - AR="$(AR)"; export AR; \ - AS="$(AS)"; export AS; \ - CC_FOR_BUILD="$(CC_FOR_BUILD)"; export CC_FOR_BUILD; \ - DLLTOOL="$(DLLTOOL)"; export DLLTOOL; \ - LD="$(LD)"; export LD; \ - NM="$(NM)"; export NM; \ - RANLIB="$(RANLIB)"; export RANLIB; \ - WINDRES="$(WINDRES)"; export WINDRES; \ - OBJCOPY="$(OBJCOPY)"; export OBJCOPY; \ - OBJDUMP="$(OBJDUMP)"; export OBJDUMP; \ - echo Configuring in libgui; \ - cd libgui || exit 1; \ - case $(srcdir) in \ - \.) \ - srcdiroption="--srcdir=."; \ - libsrcdir=".";; \ - /* | [A-Za-z]:[\\/]*) \ - srcdiroption="--srcdir=$(srcdir)/libgui"; \ - libsrcdir="$$s/libgui";; \ - *) \ - srcdiroption="--srcdir=../$(srcdir)/libgui"; \ - libsrcdir="$$s/libgui";; \ - esac; \ - $(SHELL) $${libsrcdir}/configure \ - $(HOST_CONFIGARGS) $${srcdiroption} \ - || exit 1 +# Dummy target for uncheckable module. +check-target-libgloss: -.PHONY: all-libgui maybe-all-libgui -maybe-all-libgui: -all-libgui: configure-libgui - @r=`${PWD_COMMAND}`; export r; \ - s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ - $(SET_LIB_PATH) \ - (cd libgui && $(MAKE) $(FLAGS_TO_PASS) all) -.PHONY: check-libgui maybe-check-libgui -maybe-check-libgui: +.PHONY: install-target-libgloss maybe-install-target-libgloss +maybe-install-target-libgloss: -check-libgui: +install-target-libgloss: installdirs @r=`${PWD_COMMAND}`; export r; \ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ $(SET_LIB_PATH) \ - (cd libgui && $(MAKE) $(FLAGS_TO_PASS) check) - + (cd $(TARGET_SUBDIR)/libgloss && \ + $(MAKE) $(TARGET_FLAGS_TO_PASS) install) -.PHONY: install-libgui maybe-install-libgui -maybe-install-libgui: -install-libgui: installdirs - @r=`${PWD_COMMAND}`; export r; \ - s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ - $(SET_LIB_PATH) \ - (cd libgui && $(MAKE) $(FLAGS_TO_PASS) install) +# Other targets (info, dvi, etc.) +.PHONY: maybe-info-target-libgloss info-target-libgloss +maybe-info-target-libgloss: -.PHONY: configure-libiberty maybe-configure-libiberty -maybe-configure-libiberty: -configure-libiberty: - @test ! -f libiberty/Makefile || exit 0; \ - [ -d libiberty ] || mkdir libiberty; \ +info-target-libgloss: \ + configure-target-libgloss + @[ -f $(TARGET_SUBDIR)/libgloss/Makefile ] || exit 0 ; \ r=`${PWD_COMMAND}`; export r; \ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ - CC="$(CC)"; export CC; \ - CFLAGS="$(CFLAGS)"; export CFLAGS; \ - CONFIG_SHELL="$(SHELL)"; export CONFIG_SHELL; \ - CXX="$(CXX)"; export CXX; \ - CXXFLAGS="$(CXXFLAGS)"; export CXXFLAGS; \ - AR="$(AR)"; export AR; \ - AS="$(AS)"; export AS; \ - CC_FOR_BUILD="$(CC_FOR_BUILD)"; export CC_FOR_BUILD; \ - DLLTOOL="$(DLLTOOL)"; export DLLTOOL; \ - LD="$(LD)"; export LD; \ - NM="$(NM)"; export NM; \ - RANLIB="$(RANLIB)"; export RANLIB; \ - WINDRES="$(WINDRES)"; export WINDRES; \ - OBJCOPY="$(OBJCOPY)"; export OBJCOPY; \ - OBJDUMP="$(OBJDUMP)"; export OBJDUMP; \ - echo Configuring in libiberty; \ - cd libiberty || exit 1; \ - case $(srcdir) in \ - \.) \ - srcdiroption="--srcdir=."; \ - libsrcdir=".";; \ - /* | [A-Za-z]:[\\/]*) \ - srcdiroption="--srcdir=$(srcdir)/libiberty"; \ - libsrcdir="$$s/libiberty";; \ - *) \ - srcdiroption="--srcdir=../$(srcdir)/libiberty"; \ - libsrcdir="$$s/libiberty";; \ - esac; \ - $(SHELL) $${libsrcdir}/configure \ - $(HOST_CONFIGARGS) $${srcdiroption} \ + $(SET_LIB_PATH) \ + echo "Doing info in $(TARGET_SUBDIR)/libgloss" ; \ + for flag in $(EXTRA_TARGET_FLAGS); do \ + eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \ + done; \ + (cd $(TARGET_SUBDIR)/libgloss && \ + $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \ + "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \ + "RANLIB=$${RANLIB}" \ + "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" \ + info) \ || exit 1 -.PHONY: all-libiberty maybe-all-libiberty -maybe-all-libiberty: -all-libiberty: configure-libiberty - @r=`${PWD_COMMAND}`; export r; \ - s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ - $(SET_LIB_PATH) \ - (cd libiberty && $(MAKE) $(FLAGS_TO_PASS) all) -.PHONY: check-libiberty maybe-check-libiberty -maybe-check-libiberty: +.PHONY: maybe-dvi-target-libgloss dvi-target-libgloss +maybe-dvi-target-libgloss: -check-libiberty: - @r=`${PWD_COMMAND}`; export r; \ +dvi-target-libgloss: \ + configure-target-libgloss + @[ -f $(TARGET_SUBDIR)/libgloss/Makefile ] || exit 0 ; \ + r=`${PWD_COMMAND}`; export r; \ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ $(SET_LIB_PATH) \ - (cd libiberty && $(MAKE) $(FLAGS_TO_PASS) check) - + echo "Doing dvi in $(TARGET_SUBDIR)/libgloss" ; \ + for flag in $(EXTRA_TARGET_FLAGS); do \ + eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \ + done; \ + (cd $(TARGET_SUBDIR)/libgloss && \ + $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \ + "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \ + "RANLIB=$${RANLIB}" \ + "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" \ + dvi) \ + || exit 1 -.PHONY: install-libiberty maybe-install-libiberty -maybe-install-libiberty: - -install-libiberty: installdirs - @r=`${PWD_COMMAND}`; export r; \ - s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ - $(SET_LIB_PATH) \ - (cd libiberty && $(MAKE) $(FLAGS_TO_PASS) install) +.PHONY: maybe-TAGS-target-libgloss TAGS-target-libgloss +maybe-TAGS-target-libgloss: -.PHONY: configure-libtool maybe-configure-libtool -maybe-configure-libtool: -configure-libtool: - @test ! -f libtool/Makefile || exit 0; \ - [ -d libtool ] || mkdir libtool; \ +TAGS-target-libgloss: \ + configure-target-libgloss + @[ -f $(TARGET_SUBDIR)/libgloss/Makefile ] || exit 0 ; \ r=`${PWD_COMMAND}`; export r; \ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ - CC="$(CC)"; export CC; \ - CFLAGS="$(CFLAGS)"; export CFLAGS; \ - CONFIG_SHELL="$(SHELL)"; export CONFIG_SHELL; \ - CXX="$(CXX)"; export CXX; \ - CXXFLAGS="$(CXXFLAGS)"; export CXXFLAGS; \ - AR="$(AR)"; export AR; \ - AS="$(AS)"; export AS; \ - CC_FOR_BUILD="$(CC_FOR_BUILD)"; export CC_FOR_BUILD; \ - DLLTOOL="$(DLLTOOL)"; export DLLTOOL; \ - LD="$(LD)"; export LD; \ - NM="$(NM)"; export NM; \ - RANLIB="$(RANLIB)"; export RANLIB; \ - WINDRES="$(WINDRES)"; export WINDRES; \ - OBJCOPY="$(OBJCOPY)"; export OBJCOPY; \ - OBJDUMP="$(OBJDUMP)"; export OBJDUMP; \ - echo Configuring in libtool; \ - cd libtool || exit 1; \ - case $(srcdir) in \ - \.) \ - srcdiroption="--srcdir=."; \ - libsrcdir=".";; \ - /* | [A-Za-z]:[\\/]*) \ - srcdiroption="--srcdir=$(srcdir)/libtool"; \ - libsrcdir="$$s/libtool";; \ - *) \ - srcdiroption="--srcdir=../$(srcdir)/libtool"; \ - libsrcdir="$$s/libtool";; \ - esac; \ - $(SHELL) $${libsrcdir}/configure \ - $(HOST_CONFIGARGS) $${srcdiroption} \ + $(SET_LIB_PATH) \ + echo "Doing TAGS in $(TARGET_SUBDIR)/libgloss" ; \ + for flag in $(EXTRA_TARGET_FLAGS); do \ + eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \ + done; \ + (cd $(TARGET_SUBDIR)/libgloss && \ + $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \ + "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \ + "RANLIB=$${RANLIB}" \ + "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" \ + TAGS) \ || exit 1 -.PHONY: all-libtool maybe-all-libtool -maybe-all-libtool: -all-libtool: configure-libtool - @r=`${PWD_COMMAND}`; export r; \ - s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ - $(SET_LIB_PATH) \ - (cd libtool && $(MAKE) $(FLAGS_TO_PASS) all) -.PHONY: check-libtool maybe-check-libtool -maybe-check-libtool: +.PHONY: maybe-install-info-target-libgloss install-info-target-libgloss +maybe-install-info-target-libgloss: -check-libtool: - @r=`${PWD_COMMAND}`; export r; \ +install-info-target-libgloss: \ + configure-target-libgloss \ + info-target-libgloss + @[ -f $(TARGET_SUBDIR)/libgloss/Makefile ] || exit 0 ; \ + r=`${PWD_COMMAND}`; export r; \ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ $(SET_LIB_PATH) \ - (cd libtool && $(MAKE) $(FLAGS_TO_PASS) check) - - -.PHONY: install-libtool maybe-install-libtool -maybe-install-libtool: + echo "Doing install-info in $(TARGET_SUBDIR)/libgloss" ; \ + for flag in $(EXTRA_TARGET_FLAGS); do \ + eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \ + done; \ + (cd $(TARGET_SUBDIR)/libgloss && \ + $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \ + "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \ + "RANLIB=$${RANLIB}" \ + "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" \ + install-info) \ + || exit 1 -install-libtool: installdirs - @r=`${PWD_COMMAND}`; export r; \ - s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ - $(SET_LIB_PATH) \ - (cd libtool && $(MAKE) $(FLAGS_TO_PASS) install) +.PHONY: maybe-installcheck-target-libgloss installcheck-target-libgloss +maybe-installcheck-target-libgloss: -.PHONY: configure-m4 maybe-configure-m4 -maybe-configure-m4: -configure-m4: - @test ! -f m4/Makefile || exit 0; \ - [ -d m4 ] || mkdir m4; \ +installcheck-target-libgloss: \ + configure-target-libgloss + @[ -f $(TARGET_SUBDIR)/libgloss/Makefile ] || exit 0 ; \ r=`${PWD_COMMAND}`; export r; \ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ - CC="$(CC)"; export CC; \ - CFLAGS="$(CFLAGS)"; export CFLAGS; \ - CONFIG_SHELL="$(SHELL)"; export CONFIG_SHELL; \ - CXX="$(CXX)"; export CXX; \ - CXXFLAGS="$(CXXFLAGS)"; export CXXFLAGS; \ - AR="$(AR)"; export AR; \ - AS="$(AS)"; export AS; \ - CC_FOR_BUILD="$(CC_FOR_BUILD)"; export CC_FOR_BUILD; \ - DLLTOOL="$(DLLTOOL)"; export DLLTOOL; \ - LD="$(LD)"; export LD; \ - NM="$(NM)"; export NM; \ - RANLIB="$(RANLIB)"; export RANLIB; \ - WINDRES="$(WINDRES)"; export WINDRES; \ - OBJCOPY="$(OBJCOPY)"; export OBJCOPY; \ - OBJDUMP="$(OBJDUMP)"; export OBJDUMP; \ - echo Configuring in m4; \ - cd m4 || exit 1; \ - case $(srcdir) in \ - \.) \ - srcdiroption="--srcdir=."; \ - libsrcdir=".";; \ - /* | [A-Za-z]:[\\/]*) \ - srcdiroption="--srcdir=$(srcdir)/m4"; \ - libsrcdir="$$s/m4";; \ - *) \ - srcdiroption="--srcdir=../$(srcdir)/m4"; \ - libsrcdir="$$s/m4";; \ - esac; \ - $(SHELL) $${libsrcdir}/configure \ - $(HOST_CONFIGARGS) $${srcdiroption} \ + $(SET_LIB_PATH) \ + echo "Doing installcheck in $(TARGET_SUBDIR)/libgloss" ; \ + for flag in $(EXTRA_TARGET_FLAGS); do \ + eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \ + done; \ + (cd $(TARGET_SUBDIR)/libgloss && \ + $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \ + "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \ + "RANLIB=$${RANLIB}" \ + "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" \ + installcheck) \ || exit 1 -.PHONY: all-m4 maybe-all-m4 -maybe-all-m4: -all-m4: configure-m4 - @r=`${PWD_COMMAND}`; export r; \ - s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ - $(SET_LIB_PATH) \ - (cd m4 && $(MAKE) $(FLAGS_TO_PASS) all) -.PHONY: check-m4 maybe-check-m4 -maybe-check-m4: +.PHONY: maybe-mostlyclean-target-libgloss mostlyclean-target-libgloss +maybe-mostlyclean-target-libgloss: -check-m4: - @r=`${PWD_COMMAND}`; export r; \ +mostlyclean-target-libgloss: + @[ -f $(TARGET_SUBDIR)/libgloss/Makefile ] || exit 0 ; \ + r=`${PWD_COMMAND}`; export r; \ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ $(SET_LIB_PATH) \ - (cd m4 && $(MAKE) $(FLAGS_TO_PASS) check) - - -.PHONY: install-m4 maybe-install-m4 -maybe-install-m4: + echo "Doing mostlyclean in $(TARGET_SUBDIR)/libgloss" ; \ + for flag in $(EXTRA_TARGET_FLAGS); do \ + eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \ + done; \ + (cd $(TARGET_SUBDIR)/libgloss && \ + $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \ + "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \ + "RANLIB=$${RANLIB}" \ + "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" \ + mostlyclean) \ + || exit 1 -install-m4: installdirs - @r=`${PWD_COMMAND}`; export r; \ - s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ - $(SET_LIB_PATH) \ - (cd m4 && $(MAKE) $(FLAGS_TO_PASS) install) +.PHONY: maybe-clean-target-libgloss clean-target-libgloss +maybe-clean-target-libgloss: -.PHONY: configure-make maybe-configure-make -maybe-configure-make: -configure-make: - @test ! -f make/Makefile || exit 0; \ - [ -d make ] || mkdir make; \ +clean-target-libgloss: + @[ -f $(TARGET_SUBDIR)/libgloss/Makefile ] || exit 0 ; \ r=`${PWD_COMMAND}`; export r; \ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ - CC="$(CC)"; export CC; \ - CFLAGS="$(CFLAGS)"; export CFLAGS; \ - CONFIG_SHELL="$(SHELL)"; export CONFIG_SHELL; \ - CXX="$(CXX)"; export CXX; \ - CXXFLAGS="$(CXXFLAGS)"; export CXXFLAGS; \ - AR="$(AR)"; export AR; \ - AS="$(AS)"; export AS; \ - CC_FOR_BUILD="$(CC_FOR_BUILD)"; export CC_FOR_BUILD; \ - DLLTOOL="$(DLLTOOL)"; export DLLTOOL; \ - LD="$(LD)"; export LD; \ - NM="$(NM)"; export NM; \ - RANLIB="$(RANLIB)"; export RANLIB; \ - WINDRES="$(WINDRES)"; export WINDRES; \ - OBJCOPY="$(OBJCOPY)"; export OBJCOPY; \ - OBJDUMP="$(OBJDUMP)"; export OBJDUMP; \ - echo Configuring in make; \ - cd make || exit 1; \ - case $(srcdir) in \ - \.) \ - srcdiroption="--srcdir=."; \ - libsrcdir=".";; \ - /* | [A-Za-z]:[\\/]*) \ - srcdiroption="--srcdir=$(srcdir)/make"; \ - libsrcdir="$$s/make";; \ - *) \ - srcdiroption="--srcdir=../$(srcdir)/make"; \ - libsrcdir="$$s/make";; \ - esac; \ - $(SHELL) $${libsrcdir}/configure \ - $(HOST_CONFIGARGS) $${srcdiroption} \ + $(SET_LIB_PATH) \ + echo "Doing clean in $(TARGET_SUBDIR)/libgloss" ; \ + for flag in $(EXTRA_TARGET_FLAGS); do \ + eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \ + done; \ + (cd $(TARGET_SUBDIR)/libgloss && \ + $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \ + "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \ + "RANLIB=$${RANLIB}" \ + "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" \ + clean) \ || exit 1 -.PHONY: all-make maybe-all-make -maybe-all-make: -all-make: configure-make - @r=`${PWD_COMMAND}`; export r; \ - s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ - $(SET_LIB_PATH) \ - (cd make && $(MAKE) $(FLAGS_TO_PASS) all) -.PHONY: check-make maybe-check-make -maybe-check-make: +.PHONY: maybe-distclean-target-libgloss distclean-target-libgloss +maybe-distclean-target-libgloss: -check-make: - @r=`${PWD_COMMAND}`; export r; \ +distclean-target-libgloss: + @[ -f $(TARGET_SUBDIR)/libgloss/Makefile ] || exit 0 ; \ + r=`${PWD_COMMAND}`; export r; \ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ $(SET_LIB_PATH) \ - (cd make && $(MAKE) $(FLAGS_TO_PASS) check) - + echo "Doing distclean in $(TARGET_SUBDIR)/libgloss" ; \ + for flag in $(EXTRA_TARGET_FLAGS); do \ + eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \ + done; \ + (cd $(TARGET_SUBDIR)/libgloss && \ + $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \ + "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \ + "RANLIB=$${RANLIB}" \ + "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" \ + distclean) \ + || exit 1 -.PHONY: install-make maybe-install-make -maybe-install-make: - -install-make: installdirs - @r=`${PWD_COMMAND}`; export r; \ - s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ - $(SET_LIB_PATH) \ - (cd make && $(MAKE) $(FLAGS_TO_PASS) install) +.PHONY: maybe-maintainer-clean-target-libgloss maintainer-clean-target-libgloss +maybe-maintainer-clean-target-libgloss: -.PHONY: configure-mmalloc maybe-configure-mmalloc -maybe-configure-mmalloc: -configure-mmalloc: - @test ! -f mmalloc/Makefile || exit 0; \ - [ -d mmalloc ] || mkdir mmalloc; \ +maintainer-clean-target-libgloss: + @[ -f $(TARGET_SUBDIR)/libgloss/Makefile ] || exit 0 ; \ r=`${PWD_COMMAND}`; export r; \ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ - CC="$(CC)"; export CC; \ - CFLAGS="$(CFLAGS)"; export CFLAGS; \ - CONFIG_SHELL="$(SHELL)"; export CONFIG_SHELL; \ - CXX="$(CXX)"; export CXX; \ - CXXFLAGS="$(CXXFLAGS)"; export CXXFLAGS; \ - AR="$(AR)"; export AR; \ - AS="$(AS)"; export AS; \ - CC_FOR_BUILD="$(CC_FOR_BUILD)"; export CC_FOR_BUILD; \ - DLLTOOL="$(DLLTOOL)"; export DLLTOOL; \ - LD="$(LD)"; export LD; \ - NM="$(NM)"; export NM; \ - RANLIB="$(RANLIB)"; export RANLIB; \ - WINDRES="$(WINDRES)"; export WINDRES; \ - OBJCOPY="$(OBJCOPY)"; export OBJCOPY; \ - OBJDUMP="$(OBJDUMP)"; export OBJDUMP; \ - echo Configuring in mmalloc; \ - cd mmalloc || exit 1; \ - case $(srcdir) in \ - \.) \ - srcdiroption="--srcdir=."; \ - libsrcdir=".";; \ - /* | [A-Za-z]:[\\/]*) \ - srcdiroption="--srcdir=$(srcdir)/mmalloc"; \ - libsrcdir="$$s/mmalloc";; \ - *) \ - srcdiroption="--srcdir=../$(srcdir)/mmalloc"; \ - libsrcdir="$$s/mmalloc";; \ - esac; \ - $(SHELL) $${libsrcdir}/configure \ - $(HOST_CONFIGARGS) $${srcdiroption} \ - || exit 1 - -.PHONY: all-mmalloc maybe-all-mmalloc -maybe-all-mmalloc: -all-mmalloc: configure-mmalloc - @r=`${PWD_COMMAND}`; export r; \ - s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ $(SET_LIB_PATH) \ - (cd mmalloc && $(MAKE) $(FLAGS_TO_PASS) all) - -.PHONY: check-mmalloc maybe-check-mmalloc -maybe-check-mmalloc: - -check-mmalloc: + echo "Doing maintainer-clean in $(TARGET_SUBDIR)/libgloss" ; \ + for flag in $(EXTRA_TARGET_FLAGS); do \ + eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \ + done; \ + (cd $(TARGET_SUBDIR)/libgloss && \ + $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \ + "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \ + "RANLIB=$${RANLIB}" \ + "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" \ + maintainer-clean) \ + || exit 1 -.PHONY: install-mmalloc maybe-install-mmalloc -maybe-install-mmalloc: -install-mmalloc: installdirs - @r=`${PWD_COMMAND}`; export r; \ - s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ - $(SET_LIB_PATH) \ - (cd mmalloc && $(MAKE) $(FLAGS_TO_PASS) install) +.PHONY: configure-target-libiberty maybe-configure-target-libiberty +maybe-configure-target-libiberty: +# There's only one multilib.out. Cleverer subdirs shouldn't need it copied. +$(TARGET_SUBDIR)/libiberty/multilib.out: multilib.out + $(SHELL) $(srcdir)/mkinstalldirs $(TARGET_SUBDIR)/libiberty ; \ + rm -f $(TARGET_SUBDIR)/libiberty/Makefile || : ; \ + cp multilib.out $(TARGET_SUBDIR)/libiberty/multilib.out -.PHONY: configure-patch maybe-configure-patch -maybe-configure-patch: -configure-patch: - @test ! -f patch/Makefile || exit 0; \ - [ -d patch ] || mkdir patch; \ +configure-target-libiberty: $(TARGET_SUBDIR)/libiberty/multilib.out + @test ! -f $(TARGET_SUBDIR)/libiberty/Makefile || exit 0; \ + $(SHELL) $(srcdir)/mkinstalldirs $(TARGET_SUBDIR)/libiberty ; \ r=`${PWD_COMMAND}`; export r; \ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ - CC="$(CC)"; export CC; \ - CFLAGS="$(CFLAGS)"; export CFLAGS; \ + $(SET_LIB_PATH) \ + AR="$(AR_FOR_TARGET)"; export AR; \ + AS="$(AS_FOR_TARGET)"; export AS; \ + CC="$(CC_FOR_TARGET)"; export CC; \ + CFLAGS="$(CFLAGS_FOR_TARGET)"; export CFLAGS; \ CONFIG_SHELL="$(SHELL)"; export CONFIG_SHELL; \ - CXX="$(CXX)"; export CXX; \ - CXXFLAGS="$(CXXFLAGS)"; export CXXFLAGS; \ - AR="$(AR)"; export AR; \ - AS="$(AS)"; export AS; \ - CC_FOR_BUILD="$(CC_FOR_BUILD)"; export CC_FOR_BUILD; \ - DLLTOOL="$(DLLTOOL)"; export DLLTOOL; \ - LD="$(LD)"; export LD; \ - NM="$(NM)"; export NM; \ - RANLIB="$(RANLIB)"; export RANLIB; \ - WINDRES="$(WINDRES)"; export WINDRES; \ - OBJCOPY="$(OBJCOPY)"; export OBJCOPY; \ - OBJDUMP="$(OBJDUMP)"; export OBJDUMP; \ - echo Configuring in patch; \ - cd patch || exit 1; \ + CPPFLAGS="$(CFLAGS_FOR_TARGET)"; export CPPFLAGS; \ + CXX="$(CXX_FOR_TARGET)"; export CXX; \ + CXXFLAGS="$(CXXFLAGS_FOR_TARGET)"; export CXXFLAGS; \ + GCJ="$(GCJ_FOR_TARGET)"; export GCJ; \ + DLLTOOL="$(DLLTOOL_FOR_TARGET)"; export DLLTOOL; \ + LD="$(LD_FOR_TARGET)"; export LD; \ + LDFLAGS="$(LDFLAGS_FOR_TARGET)"; export LDFLAGS; \ + NM="$(NM_FOR_TARGET)"; export NM; \ + RANLIB="$(RANLIB_FOR_TARGET)"; export RANLIB; \ + WINDRES="$(WINDRES_FOR_TARGET)"; export WINDRES; \ + echo Configuring in $(TARGET_SUBDIR)/libiberty; \ + cd "$(TARGET_SUBDIR)/libiberty" || exit 1; \ case $(srcdir) in \ - \.) \ - srcdiroption="--srcdir=."; \ - libsrcdir=".";; \ /* | [A-Za-z]:[\\/]*) \ - srcdiroption="--srcdir=$(srcdir)/patch"; \ - libsrcdir="$$s/patch";; \ + topdir=$(srcdir) ;; \ *) \ - srcdiroption="--srcdir=../$(srcdir)/patch"; \ - libsrcdir="$$s/patch";; \ + case "$(TARGET_SUBDIR)" in \ + .) topdir="../$(srcdir)" ;; \ + *) topdir="../../$(srcdir)" ;; \ + esac ;; \ esac; \ - $(SHELL) $${libsrcdir}/configure \ - $(HOST_CONFIGARGS) $${srcdiroption} \ + srcdiroption="--srcdir=$${topdir}/libiberty"; \ + libsrcdir="$$s/libiberty"; \ + rm -f no-such-file || : ; \ + CONFIG_SITE=no-such-file $(SHELL) $${libsrcdir}/configure \ + $(TARGET_CONFIGARGS) $${srcdiroption} \ + --with-target-subdir="$(TARGET_SUBDIR)" \ || exit 1 -.PHONY: all-patch maybe-all-patch -maybe-all-patch: -all-patch: configure-patch - @r=`${PWD_COMMAND}`; export r; \ - s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ - $(SET_LIB_PATH) \ - (cd patch && $(MAKE) $(FLAGS_TO_PASS) all) - -.PHONY: check-patch maybe-check-patch -maybe-check-patch: - -check-patch: +.PHONY: all-target-libiberty maybe-all-target-libiberty +maybe-all-target-libiberty: +all-target-libiberty: configure-target-libiberty @r=`${PWD_COMMAND}`; export r; \ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ $(SET_LIB_PATH) \ - (cd patch && $(MAKE) $(FLAGS_TO_PASS) check) - + (cd $(TARGET_SUBDIR)/libiberty && \ + $(MAKE) $(TARGET_FLAGS_TO_PASS) all) -.PHONY: install-patch maybe-install-patch -maybe-install-patch: +.PHONY: check-target-libiberty maybe-check-target-libiberty +maybe-check-target-libiberty: -install-patch: installdirs +check-target-libiberty: @r=`${PWD_COMMAND}`; export r; \ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ $(SET_LIB_PATH) \ - (cd patch && $(MAKE) $(FLAGS_TO_PASS) install) - - -.PHONY: configure-perl maybe-configure-perl -maybe-configure-perl: -configure-perl: - @test ! -f perl/Makefile || exit 0; \ - [ -d perl ] || mkdir perl; \ - r=`${PWD_COMMAND}`; export r; \ - s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ - CC="$(CC)"; export CC; \ - CFLAGS="$(CFLAGS)"; export CFLAGS; \ - CONFIG_SHELL="$(SHELL)"; export CONFIG_SHELL; \ - CXX="$(CXX)"; export CXX; \ - CXXFLAGS="$(CXXFLAGS)"; export CXXFLAGS; \ - AR="$(AR)"; export AR; \ - AS="$(AS)"; export AS; \ - CC_FOR_BUILD="$(CC_FOR_BUILD)"; export CC_FOR_BUILD; \ - DLLTOOL="$(DLLTOOL)"; export DLLTOOL; \ - LD="$(LD)"; export LD; \ - NM="$(NM)"; export NM; \ - RANLIB="$(RANLIB)"; export RANLIB; \ - WINDRES="$(WINDRES)"; export WINDRES; \ - OBJCOPY="$(OBJCOPY)"; export OBJCOPY; \ - OBJDUMP="$(OBJDUMP)"; export OBJDUMP; \ - echo Configuring in perl; \ - cd perl || exit 1; \ - case $(srcdir) in \ - \.) \ - srcdiroption="--srcdir=."; \ - libsrcdir=".";; \ - /* | [A-Za-z]:[\\/]*) \ - srcdiroption="--srcdir=$(srcdir)/perl"; \ - libsrcdir="$$s/perl";; \ - *) \ - srcdiroption="--srcdir=../$(srcdir)/perl"; \ - libsrcdir="$$s/perl";; \ - esac; \ - $(SHELL) $${libsrcdir}/configure \ - $(HOST_CONFIGARGS) $${srcdiroption} \ - || exit 1 + (cd $(TARGET_SUBDIR)/libiberty && \ + $(MAKE) $(TARGET_FLAGS_TO_PASS) check) -.PHONY: all-perl maybe-all-perl -maybe-all-perl: -all-perl: configure-perl - @r=`${PWD_COMMAND}`; export r; \ - s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ - $(SET_LIB_PATH) \ - (cd perl && $(MAKE) $(FLAGS_TO_PASS) all) -.PHONY: check-perl maybe-check-perl -maybe-check-perl: +.PHONY: install-target-libiberty maybe-install-target-libiberty +maybe-install-target-libiberty: -check-perl: +install-target-libiberty: installdirs @r=`${PWD_COMMAND}`; export r; \ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ $(SET_LIB_PATH) \ - (cd perl && $(MAKE) $(FLAGS_TO_PASS) check) - + (cd $(TARGET_SUBDIR)/libiberty && \ + $(MAKE) $(TARGET_FLAGS_TO_PASS) install) -.PHONY: install-perl maybe-install-perl -maybe-install-perl: -install-perl: installdirs - @r=`${PWD_COMMAND}`; export r; \ - s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ - $(SET_LIB_PATH) \ - (cd perl && $(MAKE) $(FLAGS_TO_PASS) install) +# Other targets (info, dvi, etc.) +.PHONY: maybe-info-target-libiberty info-target-libiberty +maybe-info-target-libiberty: -.PHONY: configure-prms maybe-configure-prms -maybe-configure-prms: -configure-prms: - @test ! -f prms/Makefile || exit 0; \ - [ -d prms ] || mkdir prms; \ +info-target-libiberty: \ + configure-target-libiberty + @[ -f $(TARGET_SUBDIR)/libiberty/Makefile ] || exit 0 ; \ r=`${PWD_COMMAND}`; export r; \ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ - CC="$(CC)"; export CC; \ - CFLAGS="$(CFLAGS)"; export CFLAGS; \ - CONFIG_SHELL="$(SHELL)"; export CONFIG_SHELL; \ - CXX="$(CXX)"; export CXX; \ - CXXFLAGS="$(CXXFLAGS)"; export CXXFLAGS; \ - AR="$(AR)"; export AR; \ - AS="$(AS)"; export AS; \ - CC_FOR_BUILD="$(CC_FOR_BUILD)"; export CC_FOR_BUILD; \ - DLLTOOL="$(DLLTOOL)"; export DLLTOOL; \ - LD="$(LD)"; export LD; \ - NM="$(NM)"; export NM; \ - RANLIB="$(RANLIB)"; export RANLIB; \ - WINDRES="$(WINDRES)"; export WINDRES; \ - OBJCOPY="$(OBJCOPY)"; export OBJCOPY; \ - OBJDUMP="$(OBJDUMP)"; export OBJDUMP; \ - echo Configuring in prms; \ - cd prms || exit 1; \ - case $(srcdir) in \ - \.) \ - srcdiroption="--srcdir=."; \ - libsrcdir=".";; \ - /* | [A-Za-z]:[\\/]*) \ - srcdiroption="--srcdir=$(srcdir)/prms"; \ - libsrcdir="$$s/prms";; \ - *) \ - srcdiroption="--srcdir=../$(srcdir)/prms"; \ - libsrcdir="$$s/prms";; \ - esac; \ - $(SHELL) $${libsrcdir}/configure \ - $(HOST_CONFIGARGS) $${srcdiroption} \ + $(SET_LIB_PATH) \ + echo "Doing info in $(TARGET_SUBDIR)/libiberty" ; \ + for flag in $(EXTRA_TARGET_FLAGS); do \ + eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \ + done; \ + (cd $(TARGET_SUBDIR)/libiberty && \ + $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \ + "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \ + "RANLIB=$${RANLIB}" \ + "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" \ + info) \ || exit 1 -.PHONY: all-prms maybe-all-prms -maybe-all-prms: -all-prms: configure-prms - @r=`${PWD_COMMAND}`; export r; \ - s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ - $(SET_LIB_PATH) \ - (cd prms && $(MAKE) $(FLAGS_TO_PASS) all) -.PHONY: check-prms maybe-check-prms -maybe-check-prms: +.PHONY: maybe-dvi-target-libiberty dvi-target-libiberty +maybe-dvi-target-libiberty: -check-prms: - @r=`${PWD_COMMAND}`; export r; \ +dvi-target-libiberty: \ + configure-target-libiberty + @[ -f $(TARGET_SUBDIR)/libiberty/Makefile ] || exit 0 ; \ + r=`${PWD_COMMAND}`; export r; \ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ $(SET_LIB_PATH) \ - (cd prms && $(MAKE) $(FLAGS_TO_PASS) check) - + echo "Doing dvi in $(TARGET_SUBDIR)/libiberty" ; \ + for flag in $(EXTRA_TARGET_FLAGS); do \ + eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \ + done; \ + (cd $(TARGET_SUBDIR)/libiberty && \ + $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \ + "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \ + "RANLIB=$${RANLIB}" \ + "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" \ + dvi) \ + || exit 1 -.PHONY: install-prms maybe-install-prms -maybe-install-prms: - -install-prms: installdirs - @r=`${PWD_COMMAND}`; export r; \ - s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ - $(SET_LIB_PATH) \ - (cd prms && $(MAKE) $(FLAGS_TO_PASS) install) +.PHONY: maybe-TAGS-target-libiberty TAGS-target-libiberty +maybe-TAGS-target-libiberty: -.PHONY: configure-rcs maybe-configure-rcs -maybe-configure-rcs: -configure-rcs: - @test ! -f rcs/Makefile || exit 0; \ - [ -d rcs ] || mkdir rcs; \ +TAGS-target-libiberty: \ + configure-target-libiberty + @[ -f $(TARGET_SUBDIR)/libiberty/Makefile ] || exit 0 ; \ r=`${PWD_COMMAND}`; export r; \ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ - CC="$(CC)"; export CC; \ - CFLAGS="$(CFLAGS)"; export CFLAGS; \ - CONFIG_SHELL="$(SHELL)"; export CONFIG_SHELL; \ - CXX="$(CXX)"; export CXX; \ - CXXFLAGS="$(CXXFLAGS)"; export CXXFLAGS; \ - AR="$(AR)"; export AR; \ - AS="$(AS)"; export AS; \ - CC_FOR_BUILD="$(CC_FOR_BUILD)"; export CC_FOR_BUILD; \ - DLLTOOL="$(DLLTOOL)"; export DLLTOOL; \ - LD="$(LD)"; export LD; \ - NM="$(NM)"; export NM; \ - RANLIB="$(RANLIB)"; export RANLIB; \ - WINDRES="$(WINDRES)"; export WINDRES; \ - OBJCOPY="$(OBJCOPY)"; export OBJCOPY; \ - OBJDUMP="$(OBJDUMP)"; export OBJDUMP; \ - echo Configuring in rcs; \ - cd rcs || exit 1; \ - case $(srcdir) in \ - \.) \ - srcdiroption="--srcdir=."; \ - libsrcdir=".";; \ - /* | [A-Za-z]:[\\/]*) \ - srcdiroption="--srcdir=$(srcdir)/rcs"; \ - libsrcdir="$$s/rcs";; \ - *) \ - srcdiroption="--srcdir=../$(srcdir)/rcs"; \ - libsrcdir="$$s/rcs";; \ - esac; \ - $(SHELL) $${libsrcdir}/configure \ - $(HOST_CONFIGARGS) $${srcdiroption} \ + $(SET_LIB_PATH) \ + echo "Doing TAGS in $(TARGET_SUBDIR)/libiberty" ; \ + for flag in $(EXTRA_TARGET_FLAGS); do \ + eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \ + done; \ + (cd $(TARGET_SUBDIR)/libiberty && \ + $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \ + "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \ + "RANLIB=$${RANLIB}" \ + "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" \ + TAGS) \ || exit 1 -.PHONY: all-rcs maybe-all-rcs -maybe-all-rcs: -all-rcs: configure-rcs - @r=`${PWD_COMMAND}`; export r; \ - s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ - $(SET_LIB_PATH) \ - (cd rcs && $(MAKE) $(FLAGS_TO_PASS) all) -.PHONY: check-rcs maybe-check-rcs -maybe-check-rcs: +.PHONY: maybe-install-info-target-libiberty install-info-target-libiberty +maybe-install-info-target-libiberty: -check-rcs: - @r=`${PWD_COMMAND}`; export r; \ +install-info-target-libiberty: \ + configure-target-libiberty \ + info-target-libiberty + @[ -f $(TARGET_SUBDIR)/libiberty/Makefile ] || exit 0 ; \ + r=`${PWD_COMMAND}`; export r; \ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ $(SET_LIB_PATH) \ - (cd rcs && $(MAKE) $(FLAGS_TO_PASS) check) - - -.PHONY: install-rcs maybe-install-rcs -maybe-install-rcs: + echo "Doing install-info in $(TARGET_SUBDIR)/libiberty" ; \ + for flag in $(EXTRA_TARGET_FLAGS); do \ + eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \ + done; \ + (cd $(TARGET_SUBDIR)/libiberty && \ + $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \ + "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \ + "RANLIB=$${RANLIB}" \ + "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" \ + install-info) \ + || exit 1 -install-rcs: installdirs - @r=`${PWD_COMMAND}`; export r; \ - s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ - $(SET_LIB_PATH) \ - (cd rcs && $(MAKE) $(FLAGS_TO_PASS) install) +.PHONY: maybe-installcheck-target-libiberty installcheck-target-libiberty +maybe-installcheck-target-libiberty: -.PHONY: configure-readline maybe-configure-readline -maybe-configure-readline: -configure-readline: - @test ! -f readline/Makefile || exit 0; \ - [ -d readline ] || mkdir readline; \ +installcheck-target-libiberty: \ + configure-target-libiberty + @[ -f $(TARGET_SUBDIR)/libiberty/Makefile ] || exit 0 ; \ r=`${PWD_COMMAND}`; export r; \ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ - CC="$(CC)"; export CC; \ - CFLAGS="$(CFLAGS)"; export CFLAGS; \ - CONFIG_SHELL="$(SHELL)"; export CONFIG_SHELL; \ - CXX="$(CXX)"; export CXX; \ - CXXFLAGS="$(CXXFLAGS)"; export CXXFLAGS; \ - AR="$(AR)"; export AR; \ - AS="$(AS)"; export AS; \ - CC_FOR_BUILD="$(CC_FOR_BUILD)"; export CC_FOR_BUILD; \ - DLLTOOL="$(DLLTOOL)"; export DLLTOOL; \ - LD="$(LD)"; export LD; \ - NM="$(NM)"; export NM; \ - RANLIB="$(RANLIB)"; export RANLIB; \ - WINDRES="$(WINDRES)"; export WINDRES; \ - OBJCOPY="$(OBJCOPY)"; export OBJCOPY; \ - OBJDUMP="$(OBJDUMP)"; export OBJDUMP; \ - echo Configuring in readline; \ - cd readline || exit 1; \ - case $(srcdir) in \ - \.) \ - srcdiroption="--srcdir=."; \ - libsrcdir=".";; \ - /* | [A-Za-z]:[\\/]*) \ - srcdiroption="--srcdir=$(srcdir)/readline"; \ - libsrcdir="$$s/readline";; \ - *) \ - srcdiroption="--srcdir=../$(srcdir)/readline"; \ - libsrcdir="$$s/readline";; \ - esac; \ - $(SHELL) $${libsrcdir}/configure \ - $(HOST_CONFIGARGS) $${srcdiroption} \ + $(SET_LIB_PATH) \ + echo "Doing installcheck in $(TARGET_SUBDIR)/libiberty" ; \ + for flag in $(EXTRA_TARGET_FLAGS); do \ + eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \ + done; \ + (cd $(TARGET_SUBDIR)/libiberty && \ + $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \ + "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \ + "RANLIB=$${RANLIB}" \ + "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" \ + installcheck) \ || exit 1 -.PHONY: all-readline maybe-all-readline -maybe-all-readline: -all-readline: configure-readline - @r=`${PWD_COMMAND}`; export r; \ - s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ - $(SET_LIB_PATH) \ - (cd readline && $(MAKE) $(FLAGS_TO_PASS) all) -.PHONY: check-readline maybe-check-readline -maybe-check-readline: +.PHONY: maybe-mostlyclean-target-libiberty mostlyclean-target-libiberty +maybe-mostlyclean-target-libiberty: -check-readline: - @r=`${PWD_COMMAND}`; export r; \ +mostlyclean-target-libiberty: + @[ -f $(TARGET_SUBDIR)/libiberty/Makefile ] || exit 0 ; \ + r=`${PWD_COMMAND}`; export r; \ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ $(SET_LIB_PATH) \ - (cd readline && $(MAKE) $(FLAGS_TO_PASS) check) - - -.PHONY: install-readline maybe-install-readline -maybe-install-readline: + echo "Doing mostlyclean in $(TARGET_SUBDIR)/libiberty" ; \ + for flag in $(EXTRA_TARGET_FLAGS); do \ + eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \ + done; \ + (cd $(TARGET_SUBDIR)/libiberty && \ + $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \ + "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \ + "RANLIB=$${RANLIB}" \ + "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" \ + mostlyclean) \ + || exit 1 -install-readline: installdirs - @r=`${PWD_COMMAND}`; export r; \ - s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ - $(SET_LIB_PATH) \ - (cd readline && $(MAKE) $(FLAGS_TO_PASS) install) +.PHONY: maybe-clean-target-libiberty clean-target-libiberty +maybe-clean-target-libiberty: -.PHONY: configure-release maybe-configure-release -maybe-configure-release: -configure-release: - @test ! -f release/Makefile || exit 0; \ - [ -d release ] || mkdir release; \ +clean-target-libiberty: + @[ -f $(TARGET_SUBDIR)/libiberty/Makefile ] || exit 0 ; \ r=`${PWD_COMMAND}`; export r; \ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ - CC="$(CC)"; export CC; \ - CFLAGS="$(CFLAGS)"; export CFLAGS; \ - CONFIG_SHELL="$(SHELL)"; export CONFIG_SHELL; \ - CXX="$(CXX)"; export CXX; \ - CXXFLAGS="$(CXXFLAGS)"; export CXXFLAGS; \ - AR="$(AR)"; export AR; \ - AS="$(AS)"; export AS; \ - CC_FOR_BUILD="$(CC_FOR_BUILD)"; export CC_FOR_BUILD; \ - DLLTOOL="$(DLLTOOL)"; export DLLTOOL; \ - LD="$(LD)"; export LD; \ - NM="$(NM)"; export NM; \ - RANLIB="$(RANLIB)"; export RANLIB; \ - WINDRES="$(WINDRES)"; export WINDRES; \ - OBJCOPY="$(OBJCOPY)"; export OBJCOPY; \ - OBJDUMP="$(OBJDUMP)"; export OBJDUMP; \ - echo Configuring in release; \ - cd release || exit 1; \ - case $(srcdir) in \ - \.) \ - srcdiroption="--srcdir=."; \ - libsrcdir=".";; \ - /* | [A-Za-z]:[\\/]*) \ - srcdiroption="--srcdir=$(srcdir)/release"; \ - libsrcdir="$$s/release";; \ - *) \ - srcdiroption="--srcdir=../$(srcdir)/release"; \ - libsrcdir="$$s/release";; \ - esac; \ - $(SHELL) $${libsrcdir}/configure \ - $(HOST_CONFIGARGS) $${srcdiroption} \ - || exit 1 - -.PHONY: all-release maybe-all-release -maybe-all-release: -all-release: configure-release - @r=`${PWD_COMMAND}`; export r; \ - s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ $(SET_LIB_PATH) \ - (cd release && $(MAKE) $(FLAGS_TO_PASS) all) - -.PHONY: check-release maybe-check-release -maybe-check-release: - -check-release: - - -.PHONY: install-release maybe-install-release -maybe-install-release: + echo "Doing clean in $(TARGET_SUBDIR)/libiberty" ; \ + for flag in $(EXTRA_TARGET_FLAGS); do \ + eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \ + done; \ + (cd $(TARGET_SUBDIR)/libiberty && \ + $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \ + "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \ + "RANLIB=$${RANLIB}" \ + "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" \ + clean) \ + || exit 1 -install-release: +.PHONY: maybe-distclean-target-libiberty distclean-target-libiberty +maybe-distclean-target-libiberty: -.PHONY: configure-recode maybe-configure-recode -maybe-configure-recode: -configure-recode: - @test ! -f recode/Makefile || exit 0; \ - [ -d recode ] || mkdir recode; \ +distclean-target-libiberty: + @[ -f $(TARGET_SUBDIR)/libiberty/Makefile ] || exit 0 ; \ r=`${PWD_COMMAND}`; export r; \ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ - CC="$(CC)"; export CC; \ - CFLAGS="$(CFLAGS)"; export CFLAGS; \ - CONFIG_SHELL="$(SHELL)"; export CONFIG_SHELL; \ - CXX="$(CXX)"; export CXX; \ - CXXFLAGS="$(CXXFLAGS)"; export CXXFLAGS; \ - AR="$(AR)"; export AR; \ - AS="$(AS)"; export AS; \ - CC_FOR_BUILD="$(CC_FOR_BUILD)"; export CC_FOR_BUILD; \ - DLLTOOL="$(DLLTOOL)"; export DLLTOOL; \ - LD="$(LD)"; export LD; \ - NM="$(NM)"; export NM; \ - RANLIB="$(RANLIB)"; export RANLIB; \ - WINDRES="$(WINDRES)"; export WINDRES; \ - OBJCOPY="$(OBJCOPY)"; export OBJCOPY; \ - OBJDUMP="$(OBJDUMP)"; export OBJDUMP; \ - echo Configuring in recode; \ - cd recode || exit 1; \ - case $(srcdir) in \ - \.) \ - srcdiroption="--srcdir=."; \ - libsrcdir=".";; \ - /* | [A-Za-z]:[\\/]*) \ - srcdiroption="--srcdir=$(srcdir)/recode"; \ - libsrcdir="$$s/recode";; \ - *) \ - srcdiroption="--srcdir=../$(srcdir)/recode"; \ - libsrcdir="$$s/recode";; \ - esac; \ - $(SHELL) $${libsrcdir}/configure \ - $(HOST_CONFIGARGS) $${srcdiroption} \ + $(SET_LIB_PATH) \ + echo "Doing distclean in $(TARGET_SUBDIR)/libiberty" ; \ + for flag in $(EXTRA_TARGET_FLAGS); do \ + eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \ + done; \ + (cd $(TARGET_SUBDIR)/libiberty && \ + $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \ + "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \ + "RANLIB=$${RANLIB}" \ + "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" \ + distclean) \ || exit 1 -.PHONY: all-recode maybe-all-recode -maybe-all-recode: -all-recode: configure-recode - @r=`${PWD_COMMAND}`; export r; \ - s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ - $(SET_LIB_PATH) \ - (cd recode && $(MAKE) $(FLAGS_TO_PASS) all) -.PHONY: check-recode maybe-check-recode -maybe-check-recode: +.PHONY: maybe-maintainer-clean-target-libiberty maintainer-clean-target-libiberty +maybe-maintainer-clean-target-libiberty: -check-recode: - @r=`${PWD_COMMAND}`; export r; \ +maintainer-clean-target-libiberty: + @[ -f $(TARGET_SUBDIR)/libiberty/Makefile ] || exit 0 ; \ + r=`${PWD_COMMAND}`; export r; \ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ $(SET_LIB_PATH) \ - (cd recode && $(MAKE) $(FLAGS_TO_PASS) check) + echo "Doing maintainer-clean in $(TARGET_SUBDIR)/libiberty" ; \ + for flag in $(EXTRA_TARGET_FLAGS); do \ + eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \ + done; \ + (cd $(TARGET_SUBDIR)/libiberty && \ + $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \ + "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \ + "RANLIB=$${RANLIB}" \ + "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" \ + maintainer-clean) \ + || exit 1 -.PHONY: install-recode maybe-install-recode -maybe-install-recode: -install-recode: installdirs - @r=`${PWD_COMMAND}`; export r; \ - s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ - $(SET_LIB_PATH) \ - (cd recode && $(MAKE) $(FLAGS_TO_PASS) install) +.PHONY: configure-target-gperf maybe-configure-target-gperf +maybe-configure-target-gperf: +# There's only one multilib.out. Cleverer subdirs shouldn't need it copied. +$(TARGET_SUBDIR)/gperf/multilib.out: multilib.out + $(SHELL) $(srcdir)/mkinstalldirs $(TARGET_SUBDIR)/gperf ; \ + rm -f $(TARGET_SUBDIR)/gperf/Makefile || : ; \ + cp multilib.out $(TARGET_SUBDIR)/gperf/multilib.out -.PHONY: configure-sed maybe-configure-sed -maybe-configure-sed: -configure-sed: - @test ! -f sed/Makefile || exit 0; \ - [ -d sed ] || mkdir sed; \ +configure-target-gperf: $(TARGET_SUBDIR)/gperf/multilib.out + @test ! -f $(TARGET_SUBDIR)/gperf/Makefile || exit 0; \ + $(SHELL) $(srcdir)/mkinstalldirs $(TARGET_SUBDIR)/gperf ; \ r=`${PWD_COMMAND}`; export r; \ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ - CC="$(CC)"; export CC; \ - CFLAGS="$(CFLAGS)"; export CFLAGS; \ + $(SET_LIB_PATH) \ + AR="$(AR_FOR_TARGET)"; export AR; \ + AS="$(AS_FOR_TARGET)"; export AS; \ + CC="$(CC_FOR_TARGET)"; export CC; \ + CFLAGS="$(CFLAGS_FOR_TARGET)"; export CFLAGS; \ CONFIG_SHELL="$(SHELL)"; export CONFIG_SHELL; \ - CXX="$(CXX)"; export CXX; \ - CXXFLAGS="$(CXXFLAGS)"; export CXXFLAGS; \ - AR="$(AR)"; export AR; \ - AS="$(AS)"; export AS; \ - CC_FOR_BUILD="$(CC_FOR_BUILD)"; export CC_FOR_BUILD; \ - DLLTOOL="$(DLLTOOL)"; export DLLTOOL; \ - LD="$(LD)"; export LD; \ - NM="$(NM)"; export NM; \ - RANLIB="$(RANLIB)"; export RANLIB; \ - WINDRES="$(WINDRES)"; export WINDRES; \ - OBJCOPY="$(OBJCOPY)"; export OBJCOPY; \ - OBJDUMP="$(OBJDUMP)"; export OBJDUMP; \ - echo Configuring in sed; \ - cd sed || exit 1; \ + CPPFLAGS="$(CFLAGS_FOR_TARGET)"; export CPPFLAGS; \ + CXX="$(CXX_FOR_TARGET)"; export CXX; \ + CXXFLAGS="$(CXXFLAGS_FOR_TARGET)"; export CXXFLAGS; \ + GCJ="$(GCJ_FOR_TARGET)"; export GCJ; \ + DLLTOOL="$(DLLTOOL_FOR_TARGET)"; export DLLTOOL; \ + LD="$(LD_FOR_TARGET)"; export LD; \ + LDFLAGS="$(LDFLAGS_FOR_TARGET)"; export LDFLAGS; \ + NM="$(NM_FOR_TARGET)"; export NM; \ + RANLIB="$(RANLIB_FOR_TARGET)"; export RANLIB; \ + WINDRES="$(WINDRES_FOR_TARGET)"; export WINDRES; \ + echo Configuring in $(TARGET_SUBDIR)/gperf; \ + cd "$(TARGET_SUBDIR)/gperf" || exit 1; \ case $(srcdir) in \ - \.) \ - srcdiroption="--srcdir=."; \ - libsrcdir=".";; \ /* | [A-Za-z]:[\\/]*) \ - srcdiroption="--srcdir=$(srcdir)/sed"; \ - libsrcdir="$$s/sed";; \ + topdir=$(srcdir) ;; \ *) \ - srcdiroption="--srcdir=../$(srcdir)/sed"; \ - libsrcdir="$$s/sed";; \ + case "$(TARGET_SUBDIR)" in \ + .) topdir="../$(srcdir)" ;; \ + *) topdir="../../$(srcdir)" ;; \ + esac ;; \ esac; \ - $(SHELL) $${libsrcdir}/configure \ - $(HOST_CONFIGARGS) $${srcdiroption} \ + srcdiroption="--srcdir=$${topdir}/gperf"; \ + libsrcdir="$$s/gperf"; \ + rm -f no-such-file || : ; \ + CONFIG_SITE=no-such-file $(SHELL) $${libsrcdir}/configure \ + $(TARGET_CONFIGARGS) $${srcdiroption} \ + --with-target-subdir="$(TARGET_SUBDIR)" \ || exit 1 -.PHONY: all-sed maybe-all-sed -maybe-all-sed: -all-sed: configure-sed +.PHONY: all-target-gperf maybe-all-target-gperf +maybe-all-target-gperf: +all-target-gperf: configure-target-gperf @r=`${PWD_COMMAND}`; export r; \ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ $(SET_LIB_PATH) \ - (cd sed && $(MAKE) $(FLAGS_TO_PASS) all) + (cd $(TARGET_SUBDIR)/gperf && \ + $(MAKE) $(TARGET_FLAGS_TO_PASS) all) -.PHONY: check-sed maybe-check-sed -maybe-check-sed: +.PHONY: check-target-gperf maybe-check-target-gperf +maybe-check-target-gperf: -check-sed: +check-target-gperf: @r=`${PWD_COMMAND}`; export r; \ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ $(SET_LIB_PATH) \ - (cd sed && $(MAKE) $(FLAGS_TO_PASS) check) + (cd $(TARGET_SUBDIR)/gperf && \ + $(MAKE) $(TARGET_FLAGS_TO_PASS) check) -.PHONY: install-sed maybe-install-sed -maybe-install-sed: +.PHONY: install-target-gperf maybe-install-target-gperf +maybe-install-target-gperf: -install-sed: installdirs +install-target-gperf: installdirs @r=`${PWD_COMMAND}`; export r; \ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ $(SET_LIB_PATH) \ - (cd sed && $(MAKE) $(FLAGS_TO_PASS) install) + (cd $(TARGET_SUBDIR)/gperf && \ + $(MAKE) $(TARGET_FLAGS_TO_PASS) install) -.PHONY: configure-send-pr maybe-configure-send-pr -maybe-configure-send-pr: -configure-send-pr: - @test ! -f send-pr/Makefile || exit 0; \ - [ -d send-pr ] || mkdir send-pr; \ - r=`${PWD_COMMAND}`; export r; \ - s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ - CC="$(CC)"; export CC; \ - CFLAGS="$(CFLAGS)"; export CFLAGS; \ - CONFIG_SHELL="$(SHELL)"; export CONFIG_SHELL; \ - CXX="$(CXX)"; export CXX; \ - CXXFLAGS="$(CXXFLAGS)"; export CXXFLAGS; \ - AR="$(AR)"; export AR; \ - AS="$(AS)"; export AS; \ - CC_FOR_BUILD="$(CC_FOR_BUILD)"; export CC_FOR_BUILD; \ - DLLTOOL="$(DLLTOOL)"; export DLLTOOL; \ - LD="$(LD)"; export LD; \ - NM="$(NM)"; export NM; \ - RANLIB="$(RANLIB)"; export RANLIB; \ - WINDRES="$(WINDRES)"; export WINDRES; \ - OBJCOPY="$(OBJCOPY)"; export OBJCOPY; \ - OBJDUMP="$(OBJDUMP)"; export OBJDUMP; \ - echo Configuring in send-pr; \ - cd send-pr || exit 1; \ - case $(srcdir) in \ - \.) \ - srcdiroption="--srcdir=."; \ - libsrcdir=".";; \ - /* | [A-Za-z]:[\\/]*) \ - srcdiroption="--srcdir=$(srcdir)/send-pr"; \ - libsrcdir="$$s/send-pr";; \ - *) \ - srcdiroption="--srcdir=../$(srcdir)/send-pr"; \ - libsrcdir="$$s/send-pr";; \ - esac; \ - $(SHELL) $${libsrcdir}/configure \ - $(HOST_CONFIGARGS) $${srcdiroption} \ - || exit 1 - -.PHONY: all-send-pr maybe-all-send-pr -maybe-all-send-pr: -all-send-pr: configure-send-pr - @r=`${PWD_COMMAND}`; export r; \ - s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ - $(SET_LIB_PATH) \ - (cd send-pr && $(MAKE) $(FLAGS_TO_PASS) all) +# Other targets (info, dvi, etc.) -.PHONY: check-send-pr maybe-check-send-pr -maybe-check-send-pr: +.PHONY: maybe-info-target-gperf info-target-gperf +maybe-info-target-gperf: -check-send-pr: - @r=`${PWD_COMMAND}`; export r; \ +info-target-gperf: \ + configure-target-gperf + @[ -f $(TARGET_SUBDIR)/gperf/Makefile ] || exit 0 ; \ + r=`${PWD_COMMAND}`; export r; \ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ $(SET_LIB_PATH) \ - (cd send-pr && $(MAKE) $(FLAGS_TO_PASS) check) - - -.PHONY: install-send-pr maybe-install-send-pr -maybe-install-send-pr: + echo "Doing info in $(TARGET_SUBDIR)/gperf" ; \ + for flag in $(EXTRA_TARGET_FLAGS); do \ + eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \ + done; \ + (cd $(TARGET_SUBDIR)/gperf && \ + $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \ + "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \ + "RANLIB=$${RANLIB}" \ + "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" \ + info) \ + || exit 1 -install-send-pr: installdirs - @r=`${PWD_COMMAND}`; export r; \ - s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ - $(SET_LIB_PATH) \ - (cd send-pr && $(MAKE) $(FLAGS_TO_PASS) install) +.PHONY: maybe-dvi-target-gperf dvi-target-gperf +maybe-dvi-target-gperf: -.PHONY: configure-shellutils maybe-configure-shellutils -maybe-configure-shellutils: -configure-shellutils: - @test ! -f shellutils/Makefile || exit 0; \ - [ -d shellutils ] || mkdir shellutils; \ +dvi-target-gperf: \ + configure-target-gperf + @[ -f $(TARGET_SUBDIR)/gperf/Makefile ] || exit 0 ; \ r=`${PWD_COMMAND}`; export r; \ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ - CC="$(CC)"; export CC; \ - CFLAGS="$(CFLAGS)"; export CFLAGS; \ - CONFIG_SHELL="$(SHELL)"; export CONFIG_SHELL; \ - CXX="$(CXX)"; export CXX; \ - CXXFLAGS="$(CXXFLAGS)"; export CXXFLAGS; \ - AR="$(AR)"; export AR; \ - AS="$(AS)"; export AS; \ - CC_FOR_BUILD="$(CC_FOR_BUILD)"; export CC_FOR_BUILD; \ - DLLTOOL="$(DLLTOOL)"; export DLLTOOL; \ - LD="$(LD)"; export LD; \ - NM="$(NM)"; export NM; \ - RANLIB="$(RANLIB)"; export RANLIB; \ - WINDRES="$(WINDRES)"; export WINDRES; \ - OBJCOPY="$(OBJCOPY)"; export OBJCOPY; \ - OBJDUMP="$(OBJDUMP)"; export OBJDUMP; \ - echo Configuring in shellutils; \ - cd shellutils || exit 1; \ - case $(srcdir) in \ - \.) \ - srcdiroption="--srcdir=."; \ - libsrcdir=".";; \ - /* | [A-Za-z]:[\\/]*) \ - srcdiroption="--srcdir=$(srcdir)/shellutils"; \ - libsrcdir="$$s/shellutils";; \ - *) \ - srcdiroption="--srcdir=../$(srcdir)/shellutils"; \ - libsrcdir="$$s/shellutils";; \ - esac; \ - $(SHELL) $${libsrcdir}/configure \ - $(HOST_CONFIGARGS) $${srcdiroption} \ + $(SET_LIB_PATH) \ + echo "Doing dvi in $(TARGET_SUBDIR)/gperf" ; \ + for flag in $(EXTRA_TARGET_FLAGS); do \ + eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \ + done; \ + (cd $(TARGET_SUBDIR)/gperf && \ + $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \ + "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \ + "RANLIB=$${RANLIB}" \ + "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" \ + dvi) \ || exit 1 -.PHONY: all-shellutils maybe-all-shellutils -maybe-all-shellutils: -all-shellutils: configure-shellutils - @r=`${PWD_COMMAND}`; export r; \ - s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ - $(SET_LIB_PATH) \ - (cd shellutils && $(MAKE) $(FLAGS_TO_PASS) all) -.PHONY: check-shellutils maybe-check-shellutils -maybe-check-shellutils: +.PHONY: maybe-TAGS-target-gperf TAGS-target-gperf +maybe-TAGS-target-gperf: -check-shellutils: - @r=`${PWD_COMMAND}`; export r; \ +TAGS-target-gperf: \ + configure-target-gperf + @[ -f $(TARGET_SUBDIR)/gperf/Makefile ] || exit 0 ; \ + r=`${PWD_COMMAND}`; export r; \ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ $(SET_LIB_PATH) \ - (cd shellutils && $(MAKE) $(FLAGS_TO_PASS) check) - - -.PHONY: install-shellutils maybe-install-shellutils -maybe-install-shellutils: + echo "Doing TAGS in $(TARGET_SUBDIR)/gperf" ; \ + for flag in $(EXTRA_TARGET_FLAGS); do \ + eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \ + done; \ + (cd $(TARGET_SUBDIR)/gperf && \ + $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \ + "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \ + "RANLIB=$${RANLIB}" \ + "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" \ + TAGS) \ + || exit 1 -install-shellutils: installdirs - @r=`${PWD_COMMAND}`; export r; \ - s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ - $(SET_LIB_PATH) \ - (cd shellutils && $(MAKE) $(FLAGS_TO_PASS) install) +.PHONY: maybe-install-info-target-gperf install-info-target-gperf +maybe-install-info-target-gperf: -.PHONY: configure-sid maybe-configure-sid -maybe-configure-sid: -configure-sid: - @test ! -f sid/Makefile || exit 0; \ - [ -d sid ] || mkdir sid; \ +install-info-target-gperf: \ + configure-target-gperf \ + info-target-gperf + @[ -f $(TARGET_SUBDIR)/gperf/Makefile ] || exit 0 ; \ r=`${PWD_COMMAND}`; export r; \ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ - CC="$(CC)"; export CC; \ - CFLAGS="$(CFLAGS)"; export CFLAGS; \ - CONFIG_SHELL="$(SHELL)"; export CONFIG_SHELL; \ - CXX="$(CXX)"; export CXX; \ - CXXFLAGS="$(CXXFLAGS)"; export CXXFLAGS; \ - AR="$(AR)"; export AR; \ - AS="$(AS)"; export AS; \ - CC_FOR_BUILD="$(CC_FOR_BUILD)"; export CC_FOR_BUILD; \ - DLLTOOL="$(DLLTOOL)"; export DLLTOOL; \ - LD="$(LD)"; export LD; \ - NM="$(NM)"; export NM; \ - RANLIB="$(RANLIB)"; export RANLIB; \ - WINDRES="$(WINDRES)"; export WINDRES; \ - OBJCOPY="$(OBJCOPY)"; export OBJCOPY; \ - OBJDUMP="$(OBJDUMP)"; export OBJDUMP; \ - echo Configuring in sid; \ - cd sid || exit 1; \ - case $(srcdir) in \ - \.) \ - srcdiroption="--srcdir=."; \ - libsrcdir=".";; \ - /* | [A-Za-z]:[\\/]*) \ - srcdiroption="--srcdir=$(srcdir)/sid"; \ - libsrcdir="$$s/sid";; \ - *) \ - srcdiroption="--srcdir=../$(srcdir)/sid"; \ - libsrcdir="$$s/sid";; \ - esac; \ - $(SHELL) $${libsrcdir}/configure \ - $(HOST_CONFIGARGS) $${srcdiroption} \ + $(SET_LIB_PATH) \ + echo "Doing install-info in $(TARGET_SUBDIR)/gperf" ; \ + for flag in $(EXTRA_TARGET_FLAGS); do \ + eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \ + done; \ + (cd $(TARGET_SUBDIR)/gperf && \ + $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \ + "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \ + "RANLIB=$${RANLIB}" \ + "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" \ + install-info) \ || exit 1 -.PHONY: all-sid maybe-all-sid -maybe-all-sid: -all-sid: configure-sid - @r=`${PWD_COMMAND}`; export r; \ - s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ - $(SET_LIB_PATH) \ - (cd sid && $(MAKE) $(FLAGS_TO_PASS) all) -.PHONY: check-sid maybe-check-sid -maybe-check-sid: +.PHONY: maybe-installcheck-target-gperf installcheck-target-gperf +maybe-installcheck-target-gperf: -check-sid: - @r=`${PWD_COMMAND}`; export r; \ +installcheck-target-gperf: \ + configure-target-gperf + @[ -f $(TARGET_SUBDIR)/gperf/Makefile ] || exit 0 ; \ + r=`${PWD_COMMAND}`; export r; \ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ $(SET_LIB_PATH) \ - (cd sid && $(MAKE) $(FLAGS_TO_PASS) check) - - -.PHONY: install-sid maybe-install-sid -maybe-install-sid: + echo "Doing installcheck in $(TARGET_SUBDIR)/gperf" ; \ + for flag in $(EXTRA_TARGET_FLAGS); do \ + eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \ + done; \ + (cd $(TARGET_SUBDIR)/gperf && \ + $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \ + "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \ + "RANLIB=$${RANLIB}" \ + "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" \ + installcheck) \ + || exit 1 -install-sid: installdirs - @r=`${PWD_COMMAND}`; export r; \ - s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ - $(SET_LIB_PATH) \ - (cd sid && $(MAKE) $(FLAGS_TO_PASS) install) +.PHONY: maybe-mostlyclean-target-gperf mostlyclean-target-gperf +maybe-mostlyclean-target-gperf: -.PHONY: configure-sim maybe-configure-sim -maybe-configure-sim: -configure-sim: - @test ! -f sim/Makefile || exit 0; \ - [ -d sim ] || mkdir sim; \ +mostlyclean-target-gperf: + @[ -f $(TARGET_SUBDIR)/gperf/Makefile ] || exit 0 ; \ r=`${PWD_COMMAND}`; export r; \ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ - CC="$(CC)"; export CC; \ - CFLAGS="$(CFLAGS)"; export CFLAGS; \ - CONFIG_SHELL="$(SHELL)"; export CONFIG_SHELL; \ - CXX="$(CXX)"; export CXX; \ - CXXFLAGS="$(CXXFLAGS)"; export CXXFLAGS; \ - AR="$(AR)"; export AR; \ - AS="$(AS)"; export AS; \ - CC_FOR_BUILD="$(CC_FOR_BUILD)"; export CC_FOR_BUILD; \ - DLLTOOL="$(DLLTOOL)"; export DLLTOOL; \ - LD="$(LD)"; export LD; \ - NM="$(NM)"; export NM; \ - RANLIB="$(RANLIB)"; export RANLIB; \ - WINDRES="$(WINDRES)"; export WINDRES; \ - OBJCOPY="$(OBJCOPY)"; export OBJCOPY; \ - OBJDUMP="$(OBJDUMP)"; export OBJDUMP; \ - echo Configuring in sim; \ - cd sim || exit 1; \ - case $(srcdir) in \ - \.) \ - srcdiroption="--srcdir=."; \ - libsrcdir=".";; \ - /* | [A-Za-z]:[\\/]*) \ - srcdiroption="--srcdir=$(srcdir)/sim"; \ - libsrcdir="$$s/sim";; \ - *) \ - srcdiroption="--srcdir=../$(srcdir)/sim"; \ - libsrcdir="$$s/sim";; \ - esac; \ - $(SHELL) $${libsrcdir}/configure \ - $(HOST_CONFIGARGS) $${srcdiroption} \ + $(SET_LIB_PATH) \ + echo "Doing mostlyclean in $(TARGET_SUBDIR)/gperf" ; \ + for flag in $(EXTRA_TARGET_FLAGS); do \ + eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \ + done; \ + (cd $(TARGET_SUBDIR)/gperf && \ + $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \ + "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \ + "RANLIB=$${RANLIB}" \ + "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" \ + mostlyclean) \ || exit 1 -.PHONY: all-sim maybe-all-sim -maybe-all-sim: -all-sim: configure-sim - @r=`${PWD_COMMAND}`; export r; \ - s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ - $(SET_LIB_PATH) \ - (cd sim && $(MAKE) $(FLAGS_TO_PASS) all) -.PHONY: check-sim maybe-check-sim -maybe-check-sim: +.PHONY: maybe-clean-target-gperf clean-target-gperf +maybe-clean-target-gperf: -check-sim: - @r=`${PWD_COMMAND}`; export r; \ +clean-target-gperf: + @[ -f $(TARGET_SUBDIR)/gperf/Makefile ] || exit 0 ; \ + r=`${PWD_COMMAND}`; export r; \ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ $(SET_LIB_PATH) \ - (cd sim && $(MAKE) $(FLAGS_TO_PASS) check) - - -.PHONY: install-sim maybe-install-sim -maybe-install-sim: + echo "Doing clean in $(TARGET_SUBDIR)/gperf" ; \ + for flag in $(EXTRA_TARGET_FLAGS); do \ + eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \ + done; \ + (cd $(TARGET_SUBDIR)/gperf && \ + $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \ + "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \ + "RANLIB=$${RANLIB}" \ + "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" \ + clean) \ + || exit 1 -install-sim: installdirs - @r=`${PWD_COMMAND}`; export r; \ - s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ - $(SET_LIB_PATH) \ - (cd sim && $(MAKE) $(FLAGS_TO_PASS) install) +.PHONY: maybe-distclean-target-gperf distclean-target-gperf +maybe-distclean-target-gperf: -.PHONY: configure-tar maybe-configure-tar -maybe-configure-tar: -configure-tar: - @test ! -f tar/Makefile || exit 0; \ - [ -d tar ] || mkdir tar; \ +distclean-target-gperf: + @[ -f $(TARGET_SUBDIR)/gperf/Makefile ] || exit 0 ; \ r=`${PWD_COMMAND}`; export r; \ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ - CC="$(CC)"; export CC; \ - CFLAGS="$(CFLAGS)"; export CFLAGS; \ - CONFIG_SHELL="$(SHELL)"; export CONFIG_SHELL; \ - CXX="$(CXX)"; export CXX; \ - CXXFLAGS="$(CXXFLAGS)"; export CXXFLAGS; \ - AR="$(AR)"; export AR; \ - AS="$(AS)"; export AS; \ - CC_FOR_BUILD="$(CC_FOR_BUILD)"; export CC_FOR_BUILD; \ - DLLTOOL="$(DLLTOOL)"; export DLLTOOL; \ - LD="$(LD)"; export LD; \ - NM="$(NM)"; export NM; \ - RANLIB="$(RANLIB)"; export RANLIB; \ - WINDRES="$(WINDRES)"; export WINDRES; \ - OBJCOPY="$(OBJCOPY)"; export OBJCOPY; \ - OBJDUMP="$(OBJDUMP)"; export OBJDUMP; \ - echo Configuring in tar; \ - cd tar || exit 1; \ - case $(srcdir) in \ - \.) \ - srcdiroption="--srcdir=."; \ - libsrcdir=".";; \ - /* | [A-Za-z]:[\\/]*) \ - srcdiroption="--srcdir=$(srcdir)/tar"; \ - libsrcdir="$$s/tar";; \ - *) \ - srcdiroption="--srcdir=../$(srcdir)/tar"; \ - libsrcdir="$$s/tar";; \ - esac; \ - $(SHELL) $${libsrcdir}/configure \ - $(HOST_CONFIGARGS) $${srcdiroption} \ + $(SET_LIB_PATH) \ + echo "Doing distclean in $(TARGET_SUBDIR)/gperf" ; \ + for flag in $(EXTRA_TARGET_FLAGS); do \ + eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \ + done; \ + (cd $(TARGET_SUBDIR)/gperf && \ + $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \ + "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \ + "RANLIB=$${RANLIB}" \ + "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" \ + distclean) \ || exit 1 -.PHONY: all-tar maybe-all-tar -maybe-all-tar: -all-tar: configure-tar - @r=`${PWD_COMMAND}`; export r; \ - s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ - $(SET_LIB_PATH) \ - (cd tar && $(MAKE) $(FLAGS_TO_PASS) all) -.PHONY: check-tar maybe-check-tar -maybe-check-tar: +.PHONY: maybe-maintainer-clean-target-gperf maintainer-clean-target-gperf +maybe-maintainer-clean-target-gperf: -check-tar: - @r=`${PWD_COMMAND}`; export r; \ +maintainer-clean-target-gperf: + @[ -f $(TARGET_SUBDIR)/gperf/Makefile ] || exit 0 ; \ + r=`${PWD_COMMAND}`; export r; \ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ $(SET_LIB_PATH) \ - (cd tar && $(MAKE) $(FLAGS_TO_PASS) check) + echo "Doing maintainer-clean in $(TARGET_SUBDIR)/gperf" ; \ + for flag in $(EXTRA_TARGET_FLAGS); do \ + eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \ + done; \ + (cd $(TARGET_SUBDIR)/gperf && \ + $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \ + "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \ + "RANLIB=$${RANLIB}" \ + "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" \ + maintainer-clean) \ + || exit 1 -.PHONY: install-tar maybe-install-tar -maybe-install-tar: -install-tar: installdirs - @r=`${PWD_COMMAND}`; export r; \ - s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ - $(SET_LIB_PATH) \ - (cd tar && $(MAKE) $(FLAGS_TO_PASS) install) +.PHONY: configure-target-examples maybe-configure-target-examples +maybe-configure-target-examples: +# There's only one multilib.out. Cleverer subdirs shouldn't need it copied. +$(TARGET_SUBDIR)/examples/multilib.out: multilib.out + $(SHELL) $(srcdir)/mkinstalldirs $(TARGET_SUBDIR)/examples ; \ + rm -f $(TARGET_SUBDIR)/examples/Makefile || : ; \ + cp multilib.out $(TARGET_SUBDIR)/examples/multilib.out -.PHONY: configure-texinfo maybe-configure-texinfo -maybe-configure-texinfo: -configure-texinfo: - @test ! -f texinfo/Makefile || exit 0; \ - [ -d texinfo ] || mkdir texinfo; \ +configure-target-examples: $(TARGET_SUBDIR)/examples/multilib.out + @test ! -f $(TARGET_SUBDIR)/examples/Makefile || exit 0; \ + $(SHELL) $(srcdir)/mkinstalldirs $(TARGET_SUBDIR)/examples ; \ r=`${PWD_COMMAND}`; export r; \ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ - CC="$(CC)"; export CC; \ - CFLAGS="$(CFLAGS)"; export CFLAGS; \ + $(SET_LIB_PATH) \ + AR="$(AR_FOR_TARGET)"; export AR; \ + AS="$(AS_FOR_TARGET)"; export AS; \ + CC="$(CC_FOR_TARGET)"; export CC; \ + CFLAGS="$(CFLAGS_FOR_TARGET)"; export CFLAGS; \ CONFIG_SHELL="$(SHELL)"; export CONFIG_SHELL; \ - CXX="$(CXX)"; export CXX; \ - CXXFLAGS="$(CXXFLAGS)"; export CXXFLAGS; \ - AR="$(AR)"; export AR; \ - AS="$(AS)"; export AS; \ - CC_FOR_BUILD="$(CC_FOR_BUILD)"; export CC_FOR_BUILD; \ - DLLTOOL="$(DLLTOOL)"; export DLLTOOL; \ - LD="$(LD)"; export LD; \ - NM="$(NM)"; export NM; \ - RANLIB="$(RANLIB)"; export RANLIB; \ - WINDRES="$(WINDRES)"; export WINDRES; \ - OBJCOPY="$(OBJCOPY)"; export OBJCOPY; \ - OBJDUMP="$(OBJDUMP)"; export OBJDUMP; \ - echo Configuring in texinfo; \ - cd texinfo || exit 1; \ + CPPFLAGS="$(CFLAGS_FOR_TARGET)"; export CPPFLAGS; \ + CXX="$(CXX_FOR_TARGET)"; export CXX; \ + CXXFLAGS="$(CXXFLAGS_FOR_TARGET)"; export CXXFLAGS; \ + GCJ="$(GCJ_FOR_TARGET)"; export GCJ; \ + DLLTOOL="$(DLLTOOL_FOR_TARGET)"; export DLLTOOL; \ + LD="$(LD_FOR_TARGET)"; export LD; \ + LDFLAGS="$(LDFLAGS_FOR_TARGET)"; export LDFLAGS; \ + NM="$(NM_FOR_TARGET)"; export NM; \ + RANLIB="$(RANLIB_FOR_TARGET)"; export RANLIB; \ + WINDRES="$(WINDRES_FOR_TARGET)"; export WINDRES; \ + echo Configuring in $(TARGET_SUBDIR)/examples; \ + cd "$(TARGET_SUBDIR)/examples" || exit 1; \ case $(srcdir) in \ - \.) \ - srcdiroption="--srcdir=."; \ - libsrcdir=".";; \ /* | [A-Za-z]:[\\/]*) \ - srcdiroption="--srcdir=$(srcdir)/texinfo"; \ - libsrcdir="$$s/texinfo";; \ + topdir=$(srcdir) ;; \ *) \ - srcdiroption="--srcdir=../$(srcdir)/texinfo"; \ - libsrcdir="$$s/texinfo";; \ + case "$(TARGET_SUBDIR)" in \ + .) topdir="../$(srcdir)" ;; \ + *) topdir="../../$(srcdir)" ;; \ + esac ;; \ esac; \ - $(SHELL) $${libsrcdir}/configure \ - $(HOST_CONFIGARGS) $${srcdiroption} \ + srcdiroption="--srcdir=$${topdir}/examples"; \ + libsrcdir="$$s/examples"; \ + rm -f no-such-file || : ; \ + CONFIG_SITE=no-such-file $(SHELL) $${libsrcdir}/configure \ + $(TARGET_CONFIGARGS) $${srcdiroption} \ + --with-target-subdir="$(TARGET_SUBDIR)" \ || exit 1 -.PHONY: all-texinfo maybe-all-texinfo -maybe-all-texinfo: -all-texinfo: configure-texinfo +.PHONY: all-target-examples maybe-all-target-examples +maybe-all-target-examples: +all-target-examples: configure-target-examples @r=`${PWD_COMMAND}`; export r; \ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ $(SET_LIB_PATH) \ - (cd texinfo && $(MAKE) $(FLAGS_TO_PASS) all) + (cd $(TARGET_SUBDIR)/examples && \ + $(MAKE) $(TARGET_FLAGS_TO_PASS) all) -.PHONY: check-texinfo maybe-check-texinfo -maybe-check-texinfo: +.PHONY: check-target-examples maybe-check-target-examples +maybe-check-target-examples: -check-texinfo: - @r=`${PWD_COMMAND}`; export r; \ - s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ - $(SET_LIB_PATH) \ - (cd texinfo && $(MAKE) $(FLAGS_TO_PASS) check) +# Dummy target for uncheckable module. +check-target-examples: -.PHONY: install-texinfo maybe-install-texinfo -maybe-install-texinfo: +.PHONY: install-target-examples maybe-install-target-examples +maybe-install-target-examples: -install-texinfo: +# Dummy target for uninstallable. +install-target-examples: -.PHONY: configure-textutils maybe-configure-textutils -maybe-configure-textutils: -configure-textutils: - @test ! -f textutils/Makefile || exit 0; \ - [ -d textutils ] || mkdir textutils; \ - r=`${PWD_COMMAND}`; export r; \ - s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ - CC="$(CC)"; export CC; \ - CFLAGS="$(CFLAGS)"; export CFLAGS; \ - CONFIG_SHELL="$(SHELL)"; export CONFIG_SHELL; \ - CXX="$(CXX)"; export CXX; \ - CXXFLAGS="$(CXXFLAGS)"; export CXXFLAGS; \ - AR="$(AR)"; export AR; \ - AS="$(AS)"; export AS; \ - CC_FOR_BUILD="$(CC_FOR_BUILD)"; export CC_FOR_BUILD; \ - DLLTOOL="$(DLLTOOL)"; export DLLTOOL; \ - LD="$(LD)"; export LD; \ - NM="$(NM)"; export NM; \ - RANLIB="$(RANLIB)"; export RANLIB; \ - WINDRES="$(WINDRES)"; export WINDRES; \ - OBJCOPY="$(OBJCOPY)"; export OBJCOPY; \ - OBJDUMP="$(OBJDUMP)"; export OBJDUMP; \ - echo Configuring in textutils; \ - cd textutils || exit 1; \ - case $(srcdir) in \ - \.) \ - srcdiroption="--srcdir=."; \ - libsrcdir=".";; \ - /* | [A-Za-z]:[\\/]*) \ - srcdiroption="--srcdir=$(srcdir)/textutils"; \ - libsrcdir="$$s/textutils";; \ - *) \ - srcdiroption="--srcdir=../$(srcdir)/textutils"; \ - libsrcdir="$$s/textutils";; \ - esac; \ - $(SHELL) $${libsrcdir}/configure \ - $(HOST_CONFIGARGS) $${srcdiroption} \ - || exit 1 - -.PHONY: all-textutils maybe-all-textutils -maybe-all-textutils: -all-textutils: configure-textutils - @r=`${PWD_COMMAND}`; export r; \ - s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ - $(SET_LIB_PATH) \ - (cd textutils && $(MAKE) $(FLAGS_TO_PASS) all) +# Other targets (info, dvi, etc.) -.PHONY: check-textutils maybe-check-textutils -maybe-check-textutils: +.PHONY: maybe-info-target-examples info-target-examples +maybe-info-target-examples: -check-textutils: - @r=`${PWD_COMMAND}`; export r; \ +info-target-examples: \ + configure-target-examples + @[ -f $(TARGET_SUBDIR)/examples/Makefile ] || exit 0 ; \ + r=`${PWD_COMMAND}`; export r; \ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ $(SET_LIB_PATH) \ - (cd textutils && $(MAKE) $(FLAGS_TO_PASS) check) - - -.PHONY: install-textutils maybe-install-textutils -maybe-install-textutils: + echo "Doing info in $(TARGET_SUBDIR)/examples" ; \ + for flag in $(EXTRA_TARGET_FLAGS); do \ + eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \ + done; \ + (cd $(TARGET_SUBDIR)/examples && \ + $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \ + "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \ + "RANLIB=$${RANLIB}" \ + "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" \ + info) \ + || exit 1 -install-textutils: installdirs - @r=`${PWD_COMMAND}`; export r; \ - s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ - $(SET_LIB_PATH) \ - (cd textutils && $(MAKE) $(FLAGS_TO_PASS) install) +.PHONY: maybe-dvi-target-examples dvi-target-examples +maybe-dvi-target-examples: -.PHONY: configure-time maybe-configure-time -maybe-configure-time: -configure-time: - @test ! -f time/Makefile || exit 0; \ - [ -d time ] || mkdir time; \ +dvi-target-examples: \ + configure-target-examples + @[ -f $(TARGET_SUBDIR)/examples/Makefile ] || exit 0 ; \ r=`${PWD_COMMAND}`; export r; \ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ - CC="$(CC)"; export CC; \ - CFLAGS="$(CFLAGS)"; export CFLAGS; \ - CONFIG_SHELL="$(SHELL)"; export CONFIG_SHELL; \ - CXX="$(CXX)"; export CXX; \ - CXXFLAGS="$(CXXFLAGS)"; export CXXFLAGS; \ - AR="$(AR)"; export AR; \ - AS="$(AS)"; export AS; \ - CC_FOR_BUILD="$(CC_FOR_BUILD)"; export CC_FOR_BUILD; \ - DLLTOOL="$(DLLTOOL)"; export DLLTOOL; \ - LD="$(LD)"; export LD; \ - NM="$(NM)"; export NM; \ - RANLIB="$(RANLIB)"; export RANLIB; \ - WINDRES="$(WINDRES)"; export WINDRES; \ - OBJCOPY="$(OBJCOPY)"; export OBJCOPY; \ - OBJDUMP="$(OBJDUMP)"; export OBJDUMP; \ - echo Configuring in time; \ - cd time || exit 1; \ - case $(srcdir) in \ - \.) \ - srcdiroption="--srcdir=."; \ - libsrcdir=".";; \ - /* | [A-Za-z]:[\\/]*) \ - srcdiroption="--srcdir=$(srcdir)/time"; \ - libsrcdir="$$s/time";; \ - *) \ - srcdiroption="--srcdir=../$(srcdir)/time"; \ - libsrcdir="$$s/time";; \ - esac; \ - $(SHELL) $${libsrcdir}/configure \ - $(HOST_CONFIGARGS) $${srcdiroption} \ + $(SET_LIB_PATH) \ + echo "Doing dvi in $(TARGET_SUBDIR)/examples" ; \ + for flag in $(EXTRA_TARGET_FLAGS); do \ + eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \ + done; \ + (cd $(TARGET_SUBDIR)/examples && \ + $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \ + "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \ + "RANLIB=$${RANLIB}" \ + "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" \ + dvi) \ || exit 1 -.PHONY: all-time maybe-all-time -maybe-all-time: -all-time: configure-time - @r=`${PWD_COMMAND}`; export r; \ - s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ - $(SET_LIB_PATH) \ - (cd time && $(MAKE) $(FLAGS_TO_PASS) all) -.PHONY: check-time maybe-check-time -maybe-check-time: +.PHONY: maybe-TAGS-target-examples TAGS-target-examples +maybe-TAGS-target-examples: -check-time: - @r=`${PWD_COMMAND}`; export r; \ +TAGS-target-examples: \ + configure-target-examples + @[ -f $(TARGET_SUBDIR)/examples/Makefile ] || exit 0 ; \ + r=`${PWD_COMMAND}`; export r; \ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ $(SET_LIB_PATH) \ - (cd time && $(MAKE) $(FLAGS_TO_PASS) check) - + echo "Doing TAGS in $(TARGET_SUBDIR)/examples" ; \ + for flag in $(EXTRA_TARGET_FLAGS); do \ + eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \ + done; \ + (cd $(TARGET_SUBDIR)/examples && \ + $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \ + "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \ + "RANLIB=$${RANLIB}" \ + "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" \ + TAGS) \ + || exit 1 -.PHONY: install-time maybe-install-time -maybe-install-time: - -install-time: installdirs - @r=`${PWD_COMMAND}`; export r; \ - s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ - $(SET_LIB_PATH) \ - (cd time && $(MAKE) $(FLAGS_TO_PASS) install) +.PHONY: maybe-install-info-target-examples install-info-target-examples +maybe-install-info-target-examples: -.PHONY: configure-uudecode maybe-configure-uudecode -maybe-configure-uudecode: -configure-uudecode: - @test ! -f uudecode/Makefile || exit 0; \ - [ -d uudecode ] || mkdir uudecode; \ +install-info-target-examples: \ + configure-target-examples \ + info-target-examples + @[ -f $(TARGET_SUBDIR)/examples/Makefile ] || exit 0 ; \ r=`${PWD_COMMAND}`; export r; \ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ - CC="$(CC)"; export CC; \ - CFLAGS="$(CFLAGS)"; export CFLAGS; \ - CONFIG_SHELL="$(SHELL)"; export CONFIG_SHELL; \ - CXX="$(CXX)"; export CXX; \ - CXXFLAGS="$(CXXFLAGS)"; export CXXFLAGS; \ - AR="$(AR)"; export AR; \ - AS="$(AS)"; export AS; \ - CC_FOR_BUILD="$(CC_FOR_BUILD)"; export CC_FOR_BUILD; \ - DLLTOOL="$(DLLTOOL)"; export DLLTOOL; \ - LD="$(LD)"; export LD; \ - NM="$(NM)"; export NM; \ - RANLIB="$(RANLIB)"; export RANLIB; \ - WINDRES="$(WINDRES)"; export WINDRES; \ - OBJCOPY="$(OBJCOPY)"; export OBJCOPY; \ - OBJDUMP="$(OBJDUMP)"; export OBJDUMP; \ - echo Configuring in uudecode; \ - cd uudecode || exit 1; \ - case $(srcdir) in \ - \.) \ - srcdiroption="--srcdir=."; \ - libsrcdir=".";; \ - /* | [A-Za-z]:[\\/]*) \ - srcdiroption="--srcdir=$(srcdir)/uudecode"; \ - libsrcdir="$$s/uudecode";; \ - *) \ - srcdiroption="--srcdir=../$(srcdir)/uudecode"; \ - libsrcdir="$$s/uudecode";; \ - esac; \ - $(SHELL) $${libsrcdir}/configure \ - $(HOST_CONFIGARGS) $${srcdiroption} \ + $(SET_LIB_PATH) \ + echo "Doing install-info in $(TARGET_SUBDIR)/examples" ; \ + for flag in $(EXTRA_TARGET_FLAGS); do \ + eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \ + done; \ + (cd $(TARGET_SUBDIR)/examples && \ + $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \ + "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \ + "RANLIB=$${RANLIB}" \ + "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" \ + install-info) \ || exit 1 -.PHONY: all-uudecode maybe-all-uudecode -maybe-all-uudecode: -all-uudecode: configure-uudecode - @r=`${PWD_COMMAND}`; export r; \ - s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ - $(SET_LIB_PATH) \ - (cd uudecode && $(MAKE) $(FLAGS_TO_PASS) all) -.PHONY: check-uudecode maybe-check-uudecode -maybe-check-uudecode: +.PHONY: maybe-installcheck-target-examples installcheck-target-examples +maybe-installcheck-target-examples: -check-uudecode: - @r=`${PWD_COMMAND}`; export r; \ +installcheck-target-examples: \ + configure-target-examples + @[ -f $(TARGET_SUBDIR)/examples/Makefile ] || exit 0 ; \ + r=`${PWD_COMMAND}`; export r; \ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ $(SET_LIB_PATH) \ - (cd uudecode && $(MAKE) $(FLAGS_TO_PASS) check) - - -.PHONY: install-uudecode maybe-install-uudecode -maybe-install-uudecode: + echo "Doing installcheck in $(TARGET_SUBDIR)/examples" ; \ + for flag in $(EXTRA_TARGET_FLAGS); do \ + eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \ + done; \ + (cd $(TARGET_SUBDIR)/examples && \ + $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \ + "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \ + "RANLIB=$${RANLIB}" \ + "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" \ + installcheck) \ + || exit 1 -install-uudecode: installdirs - @r=`${PWD_COMMAND}`; export r; \ - s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ - $(SET_LIB_PATH) \ - (cd uudecode && $(MAKE) $(FLAGS_TO_PASS) install) +.PHONY: maybe-mostlyclean-target-examples mostlyclean-target-examples +maybe-mostlyclean-target-examples: -.PHONY: configure-wdiff maybe-configure-wdiff -maybe-configure-wdiff: -configure-wdiff: - @test ! -f wdiff/Makefile || exit 0; \ - [ -d wdiff ] || mkdir wdiff; \ +mostlyclean-target-examples: + @[ -f $(TARGET_SUBDIR)/examples/Makefile ] || exit 0 ; \ r=`${PWD_COMMAND}`; export r; \ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ - CC="$(CC)"; export CC; \ - CFLAGS="$(CFLAGS)"; export CFLAGS; \ - CONFIG_SHELL="$(SHELL)"; export CONFIG_SHELL; \ - CXX="$(CXX)"; export CXX; \ - CXXFLAGS="$(CXXFLAGS)"; export CXXFLAGS; \ - AR="$(AR)"; export AR; \ - AS="$(AS)"; export AS; \ - CC_FOR_BUILD="$(CC_FOR_BUILD)"; export CC_FOR_BUILD; \ - DLLTOOL="$(DLLTOOL)"; export DLLTOOL; \ - LD="$(LD)"; export LD; \ - NM="$(NM)"; export NM; \ - RANLIB="$(RANLIB)"; export RANLIB; \ - WINDRES="$(WINDRES)"; export WINDRES; \ - OBJCOPY="$(OBJCOPY)"; export OBJCOPY; \ - OBJDUMP="$(OBJDUMP)"; export OBJDUMP; \ - echo Configuring in wdiff; \ - cd wdiff || exit 1; \ - case $(srcdir) in \ - \.) \ - srcdiroption="--srcdir=."; \ - libsrcdir=".";; \ - /* | [A-Za-z]:[\\/]*) \ - srcdiroption="--srcdir=$(srcdir)/wdiff"; \ - libsrcdir="$$s/wdiff";; \ - *) \ - srcdiroption="--srcdir=../$(srcdir)/wdiff"; \ - libsrcdir="$$s/wdiff";; \ - esac; \ - $(SHELL) $${libsrcdir}/configure \ - $(HOST_CONFIGARGS) $${srcdiroption} \ + $(SET_LIB_PATH) \ + echo "Doing mostlyclean in $(TARGET_SUBDIR)/examples" ; \ + for flag in $(EXTRA_TARGET_FLAGS); do \ + eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \ + done; \ + (cd $(TARGET_SUBDIR)/examples && \ + $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \ + "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \ + "RANLIB=$${RANLIB}" \ + "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" \ + mostlyclean) \ || exit 1 -.PHONY: all-wdiff maybe-all-wdiff -maybe-all-wdiff: -all-wdiff: configure-wdiff - @r=`${PWD_COMMAND}`; export r; \ - s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ - $(SET_LIB_PATH) \ - (cd wdiff && $(MAKE) $(FLAGS_TO_PASS) all) -.PHONY: check-wdiff maybe-check-wdiff -maybe-check-wdiff: +.PHONY: maybe-clean-target-examples clean-target-examples +maybe-clean-target-examples: -check-wdiff: - @r=`${PWD_COMMAND}`; export r; \ +clean-target-examples: + @[ -f $(TARGET_SUBDIR)/examples/Makefile ] || exit 0 ; \ + r=`${PWD_COMMAND}`; export r; \ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ $(SET_LIB_PATH) \ - (cd wdiff && $(MAKE) $(FLAGS_TO_PASS) check) - - -.PHONY: install-wdiff maybe-install-wdiff -maybe-install-wdiff: + echo "Doing clean in $(TARGET_SUBDIR)/examples" ; \ + for flag in $(EXTRA_TARGET_FLAGS); do \ + eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \ + done; \ + (cd $(TARGET_SUBDIR)/examples && \ + $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \ + "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \ + "RANLIB=$${RANLIB}" \ + "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" \ + clean) \ + || exit 1 -install-wdiff: installdirs - @r=`${PWD_COMMAND}`; export r; \ - s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ - $(SET_LIB_PATH) \ - (cd wdiff && $(MAKE) $(FLAGS_TO_PASS) install) +.PHONY: maybe-distclean-target-examples distclean-target-examples +maybe-distclean-target-examples: -.PHONY: configure-zip maybe-configure-zip -maybe-configure-zip: -configure-zip: - @test ! -f zip/Makefile || exit 0; \ - [ -d zip ] || mkdir zip; \ +distclean-target-examples: + @[ -f $(TARGET_SUBDIR)/examples/Makefile ] || exit 0 ; \ r=`${PWD_COMMAND}`; export r; \ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ - CC="$(CC)"; export CC; \ - CFLAGS="$(CFLAGS)"; export CFLAGS; \ - CONFIG_SHELL="$(SHELL)"; export CONFIG_SHELL; \ - CXX="$(CXX)"; export CXX; \ - CXXFLAGS="$(CXXFLAGS)"; export CXXFLAGS; \ - AR="$(AR)"; export AR; \ - AS="$(AS)"; export AS; \ - CC_FOR_BUILD="$(CC_FOR_BUILD)"; export CC_FOR_BUILD; \ - DLLTOOL="$(DLLTOOL)"; export DLLTOOL; \ - LD="$(LD)"; export LD; \ - NM="$(NM)"; export NM; \ - RANLIB="$(RANLIB)"; export RANLIB; \ - WINDRES="$(WINDRES)"; export WINDRES; \ - OBJCOPY="$(OBJCOPY)"; export OBJCOPY; \ - OBJDUMP="$(OBJDUMP)"; export OBJDUMP; \ - echo Configuring in zip; \ - cd zip || exit 1; \ - case $(srcdir) in \ - \.) \ - srcdiroption="--srcdir=."; \ - libsrcdir=".";; \ - /* | [A-Za-z]:[\\/]*) \ - srcdiroption="--srcdir=$(srcdir)/zip"; \ - libsrcdir="$$s/zip";; \ - *) \ - srcdiroption="--srcdir=../$(srcdir)/zip"; \ - libsrcdir="$$s/zip";; \ - esac; \ - $(SHELL) $${libsrcdir}/configure \ - $(HOST_CONFIGARGS) $${srcdiroption} \ - || exit 1 - -.PHONY: all-zip maybe-all-zip -maybe-all-zip: -all-zip: configure-zip - @r=`${PWD_COMMAND}`; export r; \ - s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ $(SET_LIB_PATH) \ - (cd zip && $(MAKE) $(FLAGS_TO_PASS) all) - -.PHONY: check-zip maybe-check-zip -maybe-check-zip: - -# This module is only tested in a native toolchain. -check-zip: - @if [ '$(host)' = '$(target)' ] ; then \ - r=`${PWD_COMMAND}`; export r; \ - s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ - $(SET_LIB_PATH) \ - (cd zip && $(MAKE) $(FLAGS_TO_PASS) check); \ - fi - - -.PHONY: install-zip maybe-install-zip -maybe-install-zip: + echo "Doing distclean in $(TARGET_SUBDIR)/examples" ; \ + for flag in $(EXTRA_TARGET_FLAGS); do \ + eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \ + done; \ + (cd $(TARGET_SUBDIR)/examples && \ + $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \ + "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \ + "RANLIB=$${RANLIB}" \ + "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" \ + distclean) \ + || exit 1 -install-zip: installdirs - @r=`${PWD_COMMAND}`; export r; \ - s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ - $(SET_LIB_PATH) \ - (cd zip && $(MAKE) $(FLAGS_TO_PASS) install) +.PHONY: maybe-maintainer-clean-target-examples maintainer-clean-target-examples +maybe-maintainer-clean-target-examples: -.PHONY: configure-zlib maybe-configure-zlib -maybe-configure-zlib: -configure-zlib: - @test ! -f zlib/Makefile || exit 0; \ - [ -d zlib ] || mkdir zlib; \ +maintainer-clean-target-examples: + @[ -f $(TARGET_SUBDIR)/examples/Makefile ] || exit 0 ; \ r=`${PWD_COMMAND}`; export r; \ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ - CC="$(CC)"; export CC; \ - CFLAGS="$(CFLAGS)"; export CFLAGS; \ - CONFIG_SHELL="$(SHELL)"; export CONFIG_SHELL; \ - CXX="$(CXX)"; export CXX; \ - CXXFLAGS="$(CXXFLAGS)"; export CXXFLAGS; \ - AR="$(AR)"; export AR; \ - AS="$(AS)"; export AS; \ - CC_FOR_BUILD="$(CC_FOR_BUILD)"; export CC_FOR_BUILD; \ - DLLTOOL="$(DLLTOOL)"; export DLLTOOL; \ - LD="$(LD)"; export LD; \ - NM="$(NM)"; export NM; \ - RANLIB="$(RANLIB)"; export RANLIB; \ - WINDRES="$(WINDRES)"; export WINDRES; \ - OBJCOPY="$(OBJCOPY)"; export OBJCOPY; \ - OBJDUMP="$(OBJDUMP)"; export OBJDUMP; \ - echo Configuring in zlib; \ - cd zlib || exit 1; \ - case $(srcdir) in \ - \.) \ - srcdiroption="--srcdir=."; \ - libsrcdir=".";; \ - /* | [A-Za-z]:[\\/]*) \ - srcdiroption="--srcdir=$(srcdir)/zlib"; \ - libsrcdir="$$s/zlib";; \ - *) \ - srcdiroption="--srcdir=../$(srcdir)/zlib"; \ - libsrcdir="$$s/zlib";; \ - esac; \ - $(SHELL) $${libsrcdir}/configure \ - $(HOST_CONFIGARGS) $${srcdiroption} \ - || exit 1 - -.PHONY: all-zlib maybe-all-zlib -maybe-all-zlib: -all-zlib: configure-zlib - @r=`${PWD_COMMAND}`; export r; \ - s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ $(SET_LIB_PATH) \ - (cd zlib && $(MAKE) $(FLAGS_TO_PASS) all) - -.PHONY: check-zlib maybe-check-zlib -maybe-check-zlib: - -check-zlib: + echo "Doing maintainer-clean in $(TARGET_SUBDIR)/examples" ; \ + for flag in $(EXTRA_TARGET_FLAGS); do \ + eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \ + done; \ + (cd $(TARGET_SUBDIR)/examples && \ + $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \ + "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \ + "RANLIB=$${RANLIB}" \ + "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" \ + maintainer-clean) \ + || exit 1 -.PHONY: install-zlib maybe-install-zlib -maybe-install-zlib: -install-zlib: +.PHONY: configure-target-libffi maybe-configure-target-libffi +maybe-configure-target-libffi: +# There's only one multilib.out. Cleverer subdirs shouldn't need it copied. +$(TARGET_SUBDIR)/libffi/multilib.out: multilib.out + $(SHELL) $(srcdir)/mkinstalldirs $(TARGET_SUBDIR)/libffi ; \ + rm -f $(TARGET_SUBDIR)/libffi/Makefile || : ; \ + cp multilib.out $(TARGET_SUBDIR)/libffi/multilib.out -.PHONY: configure-gdb maybe-configure-gdb -maybe-configure-gdb: -configure-gdb: - @test ! -f gdb/Makefile || exit 0; \ - [ -d gdb ] || mkdir gdb; \ +configure-target-libffi: $(TARGET_SUBDIR)/libffi/multilib.out + @test ! -f $(TARGET_SUBDIR)/libffi/Makefile || exit 0; \ + $(SHELL) $(srcdir)/mkinstalldirs $(TARGET_SUBDIR)/libffi ; \ r=`${PWD_COMMAND}`; export r; \ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ - CC="$(CC)"; export CC; \ - CFLAGS="$(CFLAGS)"; export CFLAGS; \ + $(SET_LIB_PATH) \ + AR="$(AR_FOR_TARGET)"; export AR; \ + AS="$(AS_FOR_TARGET)"; export AS; \ + CC="$(CC_FOR_TARGET)"; export CC; \ + CFLAGS="$(CFLAGS_FOR_TARGET)"; export CFLAGS; \ CONFIG_SHELL="$(SHELL)"; export CONFIG_SHELL; \ - CXX="$(CXX)"; export CXX; \ - CXXFLAGS="$(CXXFLAGS)"; export CXXFLAGS; \ - AR="$(AR)"; export AR; \ - AS="$(AS)"; export AS; \ - CC_FOR_BUILD="$(CC_FOR_BUILD)"; export CC_FOR_BUILD; \ - DLLTOOL="$(DLLTOOL)"; export DLLTOOL; \ - LD="$(LD)"; export LD; \ - NM="$(NM)"; export NM; \ - RANLIB="$(RANLIB)"; export RANLIB; \ - WINDRES="$(WINDRES)"; export WINDRES; \ - OBJCOPY="$(OBJCOPY)"; export OBJCOPY; \ - OBJDUMP="$(OBJDUMP)"; export OBJDUMP; \ - echo Configuring in gdb; \ - cd gdb || exit 1; \ + CPPFLAGS="$(CFLAGS_FOR_TARGET)"; export CPPFLAGS; \ + CXX="$(CXX_FOR_TARGET)"; export CXX; \ + CXXFLAGS="$(CXXFLAGS_FOR_TARGET)"; export CXXFLAGS; \ + GCJ="$(GCJ_FOR_TARGET)"; export GCJ; \ + DLLTOOL="$(DLLTOOL_FOR_TARGET)"; export DLLTOOL; \ + LD="$(LD_FOR_TARGET)"; export LD; \ + LDFLAGS="$(LDFLAGS_FOR_TARGET)"; export LDFLAGS; \ + NM="$(NM_FOR_TARGET)"; export NM; \ + RANLIB="$(RANLIB_FOR_TARGET)"; export RANLIB; \ + WINDRES="$(WINDRES_FOR_TARGET)"; export WINDRES; \ + echo Configuring in $(TARGET_SUBDIR)/libffi; \ + cd "$(TARGET_SUBDIR)/libffi" || exit 1; \ case $(srcdir) in \ - \.) \ - srcdiroption="--srcdir=."; \ - libsrcdir=".";; \ /* | [A-Za-z]:[\\/]*) \ - srcdiroption="--srcdir=$(srcdir)/gdb"; \ - libsrcdir="$$s/gdb";; \ + topdir=$(srcdir) ;; \ *) \ - srcdiroption="--srcdir=../$(srcdir)/gdb"; \ - libsrcdir="$$s/gdb";; \ + case "$(TARGET_SUBDIR)" in \ + .) topdir="../$(srcdir)" ;; \ + *) topdir="../../$(srcdir)" ;; \ + esac ;; \ esac; \ - $(SHELL) $${libsrcdir}/configure \ - $(HOST_CONFIGARGS) $${srcdiroption} \ + srcdiroption="--srcdir=$${topdir}/libffi"; \ + libsrcdir="$$s/libffi"; \ + rm -f no-such-file || : ; \ + CONFIG_SITE=no-such-file $(SHELL) $${libsrcdir}/configure \ + $(TARGET_CONFIGARGS) $${srcdiroption} \ + --with-target-subdir="$(TARGET_SUBDIR)" \ || exit 1 -.PHONY: all-gdb maybe-all-gdb -maybe-all-gdb: -all-gdb: configure-gdb - @r=`${PWD_COMMAND}`; export r; \ - s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ - $(SET_LIB_PATH) \ - (cd gdb && $(MAKE) $(FLAGS_TO_PASS) $(X11_FLAGS_TO_PASS) all) - -.PHONY: check-gdb maybe-check-gdb -maybe-check-gdb: - -check-gdb: +.PHONY: all-target-libffi maybe-all-target-libffi +maybe-all-target-libffi: +all-target-libffi: configure-target-libffi @r=`${PWD_COMMAND}`; export r; \ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ $(SET_LIB_PATH) \ - (cd gdb && $(MAKE) $(FLAGS_TO_PASS) $(X11_FLAGS_TO_PASS) check) - + (cd $(TARGET_SUBDIR)/libffi && \ + $(MAKE) $(TARGET_FLAGS_TO_PASS) all) -.PHONY: install-gdb maybe-install-gdb -maybe-install-gdb: +.PHONY: check-target-libffi maybe-check-target-libffi +maybe-check-target-libffi: -install-gdb: installdirs +check-target-libffi: @r=`${PWD_COMMAND}`; export r; \ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ $(SET_LIB_PATH) \ - (cd gdb && $(MAKE) $(FLAGS_TO_PASS) $(X11_FLAGS_TO_PASS) install) - - -.PHONY: configure-expect maybe-configure-expect -maybe-configure-expect: -configure-expect: - @test ! -f expect/Makefile || exit 0; \ - [ -d expect ] || mkdir expect; \ - r=`${PWD_COMMAND}`; export r; \ - s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ - CC="$(CC)"; export CC; \ - CFLAGS="$(CFLAGS)"; export CFLAGS; \ - CONFIG_SHELL="$(SHELL)"; export CONFIG_SHELL; \ - CXX="$(CXX)"; export CXX; \ - CXXFLAGS="$(CXXFLAGS)"; export CXXFLAGS; \ - AR="$(AR)"; export AR; \ - AS="$(AS)"; export AS; \ - CC_FOR_BUILD="$(CC_FOR_BUILD)"; export CC_FOR_BUILD; \ - DLLTOOL="$(DLLTOOL)"; export DLLTOOL; \ - LD="$(LD)"; export LD; \ - NM="$(NM)"; export NM; \ - RANLIB="$(RANLIB)"; export RANLIB; \ - WINDRES="$(WINDRES)"; export WINDRES; \ - OBJCOPY="$(OBJCOPY)"; export OBJCOPY; \ - OBJDUMP="$(OBJDUMP)"; export OBJDUMP; \ - echo Configuring in expect; \ - cd expect || exit 1; \ - case $(srcdir) in \ - \.) \ - srcdiroption="--srcdir=."; \ - libsrcdir=".";; \ - /* | [A-Za-z]:[\\/]*) \ - srcdiroption="--srcdir=$(srcdir)/expect"; \ - libsrcdir="$$s/expect";; \ - *) \ - srcdiroption="--srcdir=../$(srcdir)/expect"; \ - libsrcdir="$$s/expect";; \ - esac; \ - $(SHELL) $${libsrcdir}/configure \ - $(HOST_CONFIGARGS) $${srcdiroption} \ - || exit 1 + (cd $(TARGET_SUBDIR)/libffi && \ + $(MAKE) $(TARGET_FLAGS_TO_PASS) check) -.PHONY: all-expect maybe-all-expect -maybe-all-expect: -all-expect: configure-expect - @r=`${PWD_COMMAND}`; export r; \ - s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ - $(SET_LIB_PATH) \ - (cd expect && $(MAKE) $(FLAGS_TO_PASS) $(X11_FLAGS_TO_PASS) all) -.PHONY: check-expect maybe-check-expect -maybe-check-expect: +.PHONY: install-target-libffi maybe-install-target-libffi +maybe-install-target-libffi: -check-expect: +install-target-libffi: installdirs @r=`${PWD_COMMAND}`; export r; \ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ $(SET_LIB_PATH) \ - (cd expect && $(MAKE) $(FLAGS_TO_PASS) $(X11_FLAGS_TO_PASS) check) - + (cd $(TARGET_SUBDIR)/libffi && \ + $(MAKE) $(TARGET_FLAGS_TO_PASS) install) -.PHONY: install-expect maybe-install-expect -maybe-install-expect: -install-expect: installdirs - @r=`${PWD_COMMAND}`; export r; \ - s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ - $(SET_LIB_PATH) \ - (cd expect && $(MAKE) $(FLAGS_TO_PASS) $(X11_FLAGS_TO_PASS) install) +# Other targets (info, dvi, etc.) +.PHONY: maybe-info-target-libffi info-target-libffi +maybe-info-target-libffi: -.PHONY: configure-guile maybe-configure-guile -maybe-configure-guile: -configure-guile: - @test ! -f guile/Makefile || exit 0; \ - [ -d guile ] || mkdir guile; \ +info-target-libffi: \ + configure-target-libffi + @[ -f $(TARGET_SUBDIR)/libffi/Makefile ] || exit 0 ; \ r=`${PWD_COMMAND}`; export r; \ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ - CC="$(CC)"; export CC; \ - CFLAGS="$(CFLAGS)"; export CFLAGS; \ - CONFIG_SHELL="$(SHELL)"; export CONFIG_SHELL; \ - CXX="$(CXX)"; export CXX; \ - CXXFLAGS="$(CXXFLAGS)"; export CXXFLAGS; \ - AR="$(AR)"; export AR; \ - AS="$(AS)"; export AS; \ - CC_FOR_BUILD="$(CC_FOR_BUILD)"; export CC_FOR_BUILD; \ - DLLTOOL="$(DLLTOOL)"; export DLLTOOL; \ - LD="$(LD)"; export LD; \ - NM="$(NM)"; export NM; \ - RANLIB="$(RANLIB)"; export RANLIB; \ - WINDRES="$(WINDRES)"; export WINDRES; \ - OBJCOPY="$(OBJCOPY)"; export OBJCOPY; \ - OBJDUMP="$(OBJDUMP)"; export OBJDUMP; \ - echo Configuring in guile; \ - cd guile || exit 1; \ - case $(srcdir) in \ - \.) \ - srcdiroption="--srcdir=."; \ - libsrcdir=".";; \ - /* | [A-Za-z]:[\\/]*) \ - srcdiroption="--srcdir=$(srcdir)/guile"; \ - libsrcdir="$$s/guile";; \ - *) \ - srcdiroption="--srcdir=../$(srcdir)/guile"; \ - libsrcdir="$$s/guile";; \ - esac; \ - $(SHELL) $${libsrcdir}/configure \ - $(HOST_CONFIGARGS) $${srcdiroption} \ + $(SET_LIB_PATH) \ + echo "Doing info in $(TARGET_SUBDIR)/libffi" ; \ + for flag in $(EXTRA_TARGET_FLAGS); do \ + eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \ + done; \ + (cd $(TARGET_SUBDIR)/libffi && \ + $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \ + "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \ + "RANLIB=$${RANLIB}" \ + "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" \ + info) \ || exit 1 -.PHONY: all-guile maybe-all-guile -maybe-all-guile: -all-guile: configure-guile - @r=`${PWD_COMMAND}`; export r; \ - s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ - $(SET_LIB_PATH) \ - (cd guile && $(MAKE) $(FLAGS_TO_PASS) $(X11_FLAGS_TO_PASS) all) -.PHONY: check-guile maybe-check-guile -maybe-check-guile: +.PHONY: maybe-dvi-target-libffi dvi-target-libffi +maybe-dvi-target-libffi: -check-guile: - @r=`${PWD_COMMAND}`; export r; \ +dvi-target-libffi: \ + configure-target-libffi + @[ -f $(TARGET_SUBDIR)/libffi/Makefile ] || exit 0 ; \ + r=`${PWD_COMMAND}`; export r; \ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ $(SET_LIB_PATH) \ - (cd guile && $(MAKE) $(FLAGS_TO_PASS) $(X11_FLAGS_TO_PASS) check) - - -.PHONY: install-guile maybe-install-guile -maybe-install-guile: + echo "Doing dvi in $(TARGET_SUBDIR)/libffi" ; \ + for flag in $(EXTRA_TARGET_FLAGS); do \ + eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \ + done; \ + (cd $(TARGET_SUBDIR)/libffi && \ + $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \ + "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \ + "RANLIB=$${RANLIB}" \ + "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" \ + dvi) \ + || exit 1 -install-guile: installdirs - @r=`${PWD_COMMAND}`; export r; \ - s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ - $(SET_LIB_PATH) \ - (cd guile && $(MAKE) $(FLAGS_TO_PASS) $(X11_FLAGS_TO_PASS) install) +.PHONY: maybe-TAGS-target-libffi TAGS-target-libffi +maybe-TAGS-target-libffi: -.PHONY: configure-tk maybe-configure-tk -maybe-configure-tk: -configure-tk: - @test ! -f tk/Makefile || exit 0; \ - [ -d tk ] || mkdir tk; \ +TAGS-target-libffi: \ + configure-target-libffi + @[ -f $(TARGET_SUBDIR)/libffi/Makefile ] || exit 0 ; \ r=`${PWD_COMMAND}`; export r; \ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ - CC="$(CC)"; export CC; \ - CFLAGS="$(CFLAGS)"; export CFLAGS; \ - CONFIG_SHELL="$(SHELL)"; export CONFIG_SHELL; \ - CXX="$(CXX)"; export CXX; \ - CXXFLAGS="$(CXXFLAGS)"; export CXXFLAGS; \ - AR="$(AR)"; export AR; \ - AS="$(AS)"; export AS; \ - CC_FOR_BUILD="$(CC_FOR_BUILD)"; export CC_FOR_BUILD; \ - DLLTOOL="$(DLLTOOL)"; export DLLTOOL; \ - LD="$(LD)"; export LD; \ - NM="$(NM)"; export NM; \ - RANLIB="$(RANLIB)"; export RANLIB; \ - WINDRES="$(WINDRES)"; export WINDRES; \ - OBJCOPY="$(OBJCOPY)"; export OBJCOPY; \ - OBJDUMP="$(OBJDUMP)"; export OBJDUMP; \ - echo Configuring in tk; \ - cd tk || exit 1; \ - case $(srcdir) in \ - \.) \ - srcdiroption="--srcdir=."; \ - libsrcdir=".";; \ - /* | [A-Za-z]:[\\/]*) \ - srcdiroption="--srcdir=$(srcdir)/tk"; \ - libsrcdir="$$s/tk";; \ - *) \ - srcdiroption="--srcdir=../$(srcdir)/tk"; \ - libsrcdir="$$s/tk";; \ - esac; \ - $(SHELL) $${libsrcdir}/configure \ - $(HOST_CONFIGARGS) $${srcdiroption} \ + $(SET_LIB_PATH) \ + echo "Doing TAGS in $(TARGET_SUBDIR)/libffi" ; \ + for flag in $(EXTRA_TARGET_FLAGS); do \ + eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \ + done; \ + (cd $(TARGET_SUBDIR)/libffi && \ + $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \ + "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \ + "RANLIB=$${RANLIB}" \ + "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" \ + TAGS) \ || exit 1 -.PHONY: all-tk maybe-all-tk -maybe-all-tk: -all-tk: configure-tk - @r=`${PWD_COMMAND}`; export r; \ - s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ - $(SET_LIB_PATH) \ - (cd tk && $(MAKE) $(FLAGS_TO_PASS) $(X11_FLAGS_TO_PASS) all) -.PHONY: check-tk maybe-check-tk -maybe-check-tk: +.PHONY: maybe-install-info-target-libffi install-info-target-libffi +maybe-install-info-target-libffi: -check-tk: - @r=`${PWD_COMMAND}`; export r; \ +install-info-target-libffi: \ + configure-target-libffi \ + info-target-libffi + @[ -f $(TARGET_SUBDIR)/libffi/Makefile ] || exit 0 ; \ + r=`${PWD_COMMAND}`; export r; \ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ $(SET_LIB_PATH) \ - (cd tk && $(MAKE) $(FLAGS_TO_PASS) $(X11_FLAGS_TO_PASS) check) - - -.PHONY: install-tk maybe-install-tk -maybe-install-tk: + echo "Doing install-info in $(TARGET_SUBDIR)/libffi" ; \ + for flag in $(EXTRA_TARGET_FLAGS); do \ + eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \ + done; \ + (cd $(TARGET_SUBDIR)/libffi && \ + $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \ + "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \ + "RANLIB=$${RANLIB}" \ + "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" \ + install-info) \ + || exit 1 -install-tk: installdirs - @r=`${PWD_COMMAND}`; export r; \ - s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ - $(SET_LIB_PATH) \ - (cd tk && $(MAKE) $(FLAGS_TO_PASS) $(X11_FLAGS_TO_PASS) install) +.PHONY: maybe-installcheck-target-libffi installcheck-target-libffi +maybe-installcheck-target-libffi: -.PHONY: configure-tix maybe-configure-tix -maybe-configure-tix: -configure-tix: - @test ! -f tix/Makefile || exit 0; \ - [ -d tix ] || mkdir tix; \ +installcheck-target-libffi: \ + configure-target-libffi + @[ -f $(TARGET_SUBDIR)/libffi/Makefile ] || exit 0 ; \ r=`${PWD_COMMAND}`; export r; \ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ - CC="$(CC)"; export CC; \ - CFLAGS="$(CFLAGS)"; export CFLAGS; \ - CONFIG_SHELL="$(SHELL)"; export CONFIG_SHELL; \ - CXX="$(CXX)"; export CXX; \ - CXXFLAGS="$(CXXFLAGS)"; export CXXFLAGS; \ - AR="$(AR)"; export AR; \ - AS="$(AS)"; export AS; \ - CC_FOR_BUILD="$(CC_FOR_BUILD)"; export CC_FOR_BUILD; \ - DLLTOOL="$(DLLTOOL)"; export DLLTOOL; \ - LD="$(LD)"; export LD; \ - NM="$(NM)"; export NM; \ - RANLIB="$(RANLIB)"; export RANLIB; \ - WINDRES="$(WINDRES)"; export WINDRES; \ - OBJCOPY="$(OBJCOPY)"; export OBJCOPY; \ - OBJDUMP="$(OBJDUMP)"; export OBJDUMP; \ - echo Configuring in tix; \ - cd tix || exit 1; \ - case $(srcdir) in \ - \.) \ - srcdiroption="--srcdir=."; \ - libsrcdir=".";; \ - /* | [A-Za-z]:[\\/]*) \ - srcdiroption="--srcdir=$(srcdir)/tix"; \ - libsrcdir="$$s/tix";; \ - *) \ - srcdiroption="--srcdir=../$(srcdir)/tix"; \ - libsrcdir="$$s/tix";; \ - esac; \ - $(SHELL) $${libsrcdir}/configure \ - $(HOST_CONFIGARGS) $${srcdiroption} \ + $(SET_LIB_PATH) \ + echo "Doing installcheck in $(TARGET_SUBDIR)/libffi" ; \ + for flag in $(EXTRA_TARGET_FLAGS); do \ + eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \ + done; \ + (cd $(TARGET_SUBDIR)/libffi && \ + $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \ + "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \ + "RANLIB=$${RANLIB}" \ + "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" \ + installcheck) \ || exit 1 -.PHONY: all-tix maybe-all-tix -maybe-all-tix: -all-tix: configure-tix - @r=`${PWD_COMMAND}`; export r; \ - s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ - $(SET_LIB_PATH) \ - (cd tix && $(MAKE) $(FLAGS_TO_PASS) $(X11_FLAGS_TO_PASS) all) -.PHONY: check-tix maybe-check-tix -maybe-check-tix: +.PHONY: maybe-mostlyclean-target-libffi mostlyclean-target-libffi +maybe-mostlyclean-target-libffi: -check-tix: - @r=`${PWD_COMMAND}`; export r; \ +mostlyclean-target-libffi: + @[ -f $(TARGET_SUBDIR)/libffi/Makefile ] || exit 0 ; \ + r=`${PWD_COMMAND}`; export r; \ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ $(SET_LIB_PATH) \ - (cd tix && $(MAKE) $(FLAGS_TO_PASS) $(X11_FLAGS_TO_PASS) check) - - -.PHONY: install-tix maybe-install-tix -maybe-install-tix: + echo "Doing mostlyclean in $(TARGET_SUBDIR)/libffi" ; \ + for flag in $(EXTRA_TARGET_FLAGS); do \ + eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \ + done; \ + (cd $(TARGET_SUBDIR)/libffi && \ + $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \ + "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \ + "RANLIB=$${RANLIB}" \ + "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" \ + mostlyclean) \ + || exit 1 -install-tix: installdirs - @r=`${PWD_COMMAND}`; export r; \ - s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ - $(SET_LIB_PATH) \ - (cd tix && $(MAKE) $(FLAGS_TO_PASS) $(X11_FLAGS_TO_PASS) install) +.PHONY: maybe-clean-target-libffi clean-target-libffi +maybe-clean-target-libffi: -.PHONY: configure-libtermcap maybe-configure-libtermcap -maybe-configure-libtermcap: -configure-libtermcap: - @test ! -f libtermcap/Makefile || exit 0; \ - [ -d libtermcap ] || mkdir libtermcap; \ +clean-target-libffi: + @[ -f $(TARGET_SUBDIR)/libffi/Makefile ] || exit 0 ; \ r=`${PWD_COMMAND}`; export r; \ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ - CC="$(CC)"; export CC; \ - CFLAGS="$(CFLAGS)"; export CFLAGS; \ - CONFIG_SHELL="$(SHELL)"; export CONFIG_SHELL; \ - CXX="$(CXX)"; export CXX; \ - CXXFLAGS="$(CXXFLAGS)"; export CXXFLAGS; \ - AR="$(AR)"; export AR; \ - AS="$(AS)"; export AS; \ - CC_FOR_BUILD="$(CC_FOR_BUILD)"; export CC_FOR_BUILD; \ - DLLTOOL="$(DLLTOOL)"; export DLLTOOL; \ - LD="$(LD)"; export LD; \ - NM="$(NM)"; export NM; \ - RANLIB="$(RANLIB)"; export RANLIB; \ - WINDRES="$(WINDRES)"; export WINDRES; \ - OBJCOPY="$(OBJCOPY)"; export OBJCOPY; \ - OBJDUMP="$(OBJDUMP)"; export OBJDUMP; \ - echo Configuring in libtermcap; \ - cd libtermcap || exit 1; \ - case $(srcdir) in \ - \.) \ - srcdiroption="--srcdir=."; \ - libsrcdir=".";; \ - /* | [A-Za-z]:[\\/]*) \ - srcdiroption="--srcdir=$(srcdir)/libtermcap"; \ - libsrcdir="$$s/libtermcap";; \ - *) \ - srcdiroption="--srcdir=../$(srcdir)/libtermcap"; \ - libsrcdir="$$s/libtermcap";; \ - esac; \ - $(SHELL) $${libsrcdir}/configure \ - $(HOST_CONFIGARGS) $${srcdiroption} \ - || exit 1 - -.PHONY: all-libtermcap maybe-all-libtermcap -maybe-all-libtermcap: -all-libtermcap: configure-libtermcap - @r=`${PWD_COMMAND}`; export r; \ - s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ $(SET_LIB_PATH) \ - (cd libtermcap && $(MAKE) $(FLAGS_TO_PASS) all) - -.PHONY: check-libtermcap maybe-check-libtermcap -maybe-check-libtermcap: - -check-libtermcap: - - -.PHONY: install-libtermcap maybe-install-libtermcap -maybe-install-libtermcap: + echo "Doing clean in $(TARGET_SUBDIR)/libffi" ; \ + for flag in $(EXTRA_TARGET_FLAGS); do \ + eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \ + done; \ + (cd $(TARGET_SUBDIR)/libffi && \ + $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \ + "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \ + "RANLIB=$${RANLIB}" \ + "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" \ + clean) \ + || exit 1 -install-libtermcap: installdirs - @r=`${PWD_COMMAND}`; export r; \ - s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ - $(SET_LIB_PATH) \ - (cd libtermcap && $(MAKE) $(FLAGS_TO_PASS) install) +.PHONY: maybe-distclean-target-libffi distclean-target-libffi +maybe-distclean-target-libffi: -.PHONY: configure-utils maybe-configure-utils -maybe-configure-utils: -configure-utils: - @test ! -f utils/Makefile || exit 0; \ - [ -d utils ] || mkdir utils; \ +distclean-target-libffi: + @[ -f $(TARGET_SUBDIR)/libffi/Makefile ] || exit 0 ; \ r=`${PWD_COMMAND}`; export r; \ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ - CC="$(CC)"; export CC; \ - CFLAGS="$(CFLAGS)"; export CFLAGS; \ - CONFIG_SHELL="$(SHELL)"; export CONFIG_SHELL; \ - CXX="$(CXX)"; export CXX; \ - CXXFLAGS="$(CXXFLAGS)"; export CXXFLAGS; \ - AR="$(AR)"; export AR; \ - AS="$(AS)"; export AS; \ - CC_FOR_BUILD="$(CC_FOR_BUILD)"; export CC_FOR_BUILD; \ - DLLTOOL="$(DLLTOOL)"; export DLLTOOL; \ - LD="$(LD)"; export LD; \ - NM="$(NM)"; export NM; \ - RANLIB="$(RANLIB)"; export RANLIB; \ - WINDRES="$(WINDRES)"; export WINDRES; \ - OBJCOPY="$(OBJCOPY)"; export OBJCOPY; \ - OBJDUMP="$(OBJDUMP)"; export OBJDUMP; \ - echo Configuring in utils; \ - cd utils || exit 1; \ - case $(srcdir) in \ - \.) \ - srcdiroption="--srcdir=."; \ - libsrcdir=".";; \ - /* | [A-Za-z]:[\\/]*) \ - srcdiroption="--srcdir=$(srcdir)/utils"; \ - libsrcdir="$$s/utils";; \ - *) \ - srcdiroption="--srcdir=../$(srcdir)/utils"; \ - libsrcdir="$$s/utils";; \ - esac; \ - $(SHELL) $${libsrcdir}/configure \ - $(HOST_CONFIGARGS) $${srcdiroption} \ - || exit 1 - -.PHONY: all-utils maybe-all-utils -maybe-all-utils: -all-utils: configure-utils - @r=`${PWD_COMMAND}`; export r; \ - s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ $(SET_LIB_PATH) \ - (cd utils && $(MAKE) $(FLAGS_TO_PASS) all) - -.PHONY: check-utils maybe-check-utils -maybe-check-utils: - -check-utils: + echo "Doing distclean in $(TARGET_SUBDIR)/libffi" ; \ + for flag in $(EXTRA_TARGET_FLAGS); do \ + eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \ + done; \ + (cd $(TARGET_SUBDIR)/libffi && \ + $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \ + "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \ + "RANLIB=$${RANLIB}" \ + "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" \ + distclean) \ + || exit 1 -.PHONY: install-utils maybe-install-utils -maybe-install-utils: +.PHONY: maybe-maintainer-clean-target-libffi maintainer-clean-target-libffi +maybe-maintainer-clean-target-libffi: -install-utils: installdirs - @r=`${PWD_COMMAND}`; export r; \ +maintainer-clean-target-libffi: + @[ -f $(TARGET_SUBDIR)/libffi/Makefile ] || exit 0 ; \ + r=`${PWD_COMMAND}`; export r; \ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ $(SET_LIB_PATH) \ - (cd utils && $(MAKE) $(FLAGS_TO_PASS) install) - + echo "Doing maintainer-clean in $(TARGET_SUBDIR)/libffi" ; \ + for flag in $(EXTRA_TARGET_FLAGS); do \ + eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \ + done; \ + (cd $(TARGET_SUBDIR)/libffi && \ + $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \ + "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \ + "RANLIB=$${RANLIB}" \ + "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" \ + maintainer-clean) \ + || exit 1 -# --------------------------------------- -# Modules which run on the target machine -# --------------------------------------- -.PHONY: configure-target-libstdc++-v3 maybe-configure-target-libstdc++-v3 -maybe-configure-target-libstdc++-v3: +.PHONY: configure-target-libjava maybe-configure-target-libjava +maybe-configure-target-libjava: # There's only one multilib.out. Cleverer subdirs shouldn't need it copied. -$(TARGET_SUBDIR)/libstdc++-v3/multilib.out: multilib.out - $(SHELL) $(srcdir)/mkinstalldirs $(TARGET_SUBDIR)/libstdc++-v3 ; \ - rm -f $(TARGET_SUBDIR)/libstdc++-v3/Makefile || : ; \ - cp multilib.out $(TARGET_SUBDIR)/libstdc++-v3/multilib.out +$(TARGET_SUBDIR)/libjava/multilib.out: multilib.out + $(SHELL) $(srcdir)/mkinstalldirs $(TARGET_SUBDIR)/libjava ; \ + rm -f $(TARGET_SUBDIR)/libjava/Makefile || : ; \ + cp multilib.out $(TARGET_SUBDIR)/libjava/multilib.out -configure-target-libstdc++-v3: $(TARGET_SUBDIR)/libstdc++-v3/multilib.out - @test ! -f $(TARGET_SUBDIR)/libstdc++-v3/Makefile || exit 0; \ - $(SHELL) $(srcdir)/mkinstalldirs $(TARGET_SUBDIR)/libstdc++-v3 ; \ +configure-target-libjava: $(TARGET_SUBDIR)/libjava/multilib.out + @test ! -f $(TARGET_SUBDIR)/libjava/Makefile || exit 0; \ + $(SHELL) $(srcdir)/mkinstalldirs $(TARGET_SUBDIR)/libjava ; \ r=`${PWD_COMMAND}`; export r; \ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ $(SET_LIB_PATH) \ @@ -22182,8 +21884,8 @@ configure-target-libstdc++-v3: $(TARGET_SUBDIR)/libstdc++-v3/multilib.out NM="$(NM_FOR_TARGET)"; export NM; \ RANLIB="$(RANLIB_FOR_TARGET)"; export RANLIB; \ WINDRES="$(WINDRES_FOR_TARGET)"; export WINDRES; \ - echo Configuring in $(TARGET_SUBDIR)/libstdc++-v3; \ - cd "$(TARGET_SUBDIR)/libstdc++-v3" || exit 1; \ + echo Configuring in $(TARGET_SUBDIR)/libjava; \ + cd "$(TARGET_SUBDIR)/libjava" || exit 1; \ case $(srcdir) in \ /* | [A-Za-z]:[\\/]*) \ topdir=$(srcdir) ;; \ @@ -22193,297 +21895,255 @@ configure-target-libstdc++-v3: $(TARGET_SUBDIR)/libstdc++-v3/multilib.out *) topdir="../../$(srcdir)" ;; \ esac ;; \ esac; \ - srcdiroption="--srcdir=$${topdir}/libstdc++-v3"; \ - libsrcdir="$$s/libstdc++-v3"; \ + srcdiroption="--srcdir=$${topdir}/libjava"; \ + libsrcdir="$$s/libjava"; \ rm -f no-such-file || : ; \ CONFIG_SITE=no-such-file $(SHELL) $${libsrcdir}/configure \ $(TARGET_CONFIGARGS) $${srcdiroption} \ --with-target-subdir="$(TARGET_SUBDIR)" \ || exit 1 -.PHONY: all-target-libstdc++-v3 maybe-all-target-libstdc++-v3 -maybe-all-target-libstdc++-v3: -all-target-libstdc++-v3: configure-target-libstdc++-v3 +.PHONY: all-target-libjava maybe-all-target-libjava +maybe-all-target-libjava: +all-target-libjava: configure-target-libjava @r=`${PWD_COMMAND}`; export r; \ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ $(SET_LIB_PATH) \ - (cd $(TARGET_SUBDIR)/libstdc++-v3 && \ + (cd $(TARGET_SUBDIR)/libjava && \ $(MAKE) $(TARGET_FLAGS_TO_PASS) 'CXX=$$(RAW_CXX_FOR_TARGET)' 'CXX_FOR_TARGET=$$(RAW_CXX_FOR_TARGET)' all) -.PHONY: check-target-libstdc++-v3 maybe-check-target-libstdc++-v3 -maybe-check-target-libstdc++-v3: +.PHONY: check-target-libjava maybe-check-target-libjava +maybe-check-target-libjava: -check-target-libstdc++-v3: +check-target-libjava: @r=`${PWD_COMMAND}`; export r; \ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ $(SET_LIB_PATH) \ - (cd $(TARGET_SUBDIR)/libstdc++-v3 && \ + (cd $(TARGET_SUBDIR)/libjava && \ $(MAKE) $(TARGET_FLAGS_TO_PASS) 'CXX=$$(RAW_CXX_FOR_TARGET)' 'CXX_FOR_TARGET=$$(RAW_CXX_FOR_TARGET)' check) -.PHONY: install-target-libstdc++-v3 maybe-install-target-libstdc++-v3 -maybe-install-target-libstdc++-v3: +.PHONY: install-target-libjava maybe-install-target-libjava +maybe-install-target-libjava: -install-target-libstdc++-v3: installdirs +install-target-libjava: installdirs @r=`${PWD_COMMAND}`; export r; \ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ $(SET_LIB_PATH) \ - (cd $(TARGET_SUBDIR)/libstdc++-v3 && \ + (cd $(TARGET_SUBDIR)/libjava && \ $(MAKE) $(TARGET_FLAGS_TO_PASS) install) -.PHONY: configure-target-newlib maybe-configure-target-newlib -maybe-configure-target-newlib: +# Other targets (info, dvi, etc.) -# There's only one multilib.out. Cleverer subdirs shouldn't need it copied. -$(TARGET_SUBDIR)/newlib/multilib.out: multilib.out - $(SHELL) $(srcdir)/mkinstalldirs $(TARGET_SUBDIR)/newlib ; \ - rm -f $(TARGET_SUBDIR)/newlib/Makefile || : ; \ - cp multilib.out $(TARGET_SUBDIR)/newlib/multilib.out +.PHONY: maybe-info-target-libjava info-target-libjava +maybe-info-target-libjava: -configure-target-newlib: $(TARGET_SUBDIR)/newlib/multilib.out - @test ! -f $(TARGET_SUBDIR)/newlib/Makefile || exit 0; \ - $(SHELL) $(srcdir)/mkinstalldirs $(TARGET_SUBDIR)/newlib ; \ +info-target-libjava: \ + configure-target-libjava + @[ -f $(TARGET_SUBDIR)/libjava/Makefile ] || exit 0 ; \ r=`${PWD_COMMAND}`; export r; \ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ $(SET_LIB_PATH) \ - AR="$(AR_FOR_TARGET)"; export AR; \ - AS="$(AS_FOR_TARGET)"; export AS; \ - CC="$(CC_FOR_TARGET)"; export CC; \ - CFLAGS="$(CFLAGS_FOR_TARGET)"; export CFLAGS; \ - CONFIG_SHELL="$(SHELL)"; export CONFIG_SHELL; \ - CPPFLAGS="$(CFLAGS_FOR_TARGET)"; export CPPFLAGS; \ - CXX="$(CXX_FOR_TARGET)"; export CXX; \ - CXXFLAGS="$(CXXFLAGS_FOR_TARGET)"; export CXXFLAGS; \ - GCJ="$(GCJ_FOR_TARGET)"; export GCJ; \ - DLLTOOL="$(DLLTOOL_FOR_TARGET)"; export DLLTOOL; \ - LD="$(LD_FOR_TARGET)"; export LD; \ - LDFLAGS="$(LDFLAGS_FOR_TARGET)"; export LDFLAGS; \ - NM="$(NM_FOR_TARGET)"; export NM; \ - RANLIB="$(RANLIB_FOR_TARGET)"; export RANLIB; \ - WINDRES="$(WINDRES_FOR_TARGET)"; export WINDRES; \ - echo Configuring in $(TARGET_SUBDIR)/newlib; \ - cd "$(TARGET_SUBDIR)/newlib" || exit 1; \ - case $(srcdir) in \ - /* | [A-Za-z]:[\\/]*) \ - topdir=$(srcdir) ;; \ - *) \ - case "$(TARGET_SUBDIR)" in \ - .) topdir="../$(srcdir)" ;; \ - *) topdir="../../$(srcdir)" ;; \ - esac ;; \ - esac; \ - srcdiroption="--srcdir=$${topdir}/newlib"; \ - libsrcdir="$$s/newlib"; \ - rm -f no-such-file || : ; \ - CONFIG_SITE=no-such-file $(SHELL) $${libsrcdir}/configure \ - $(TARGET_CONFIGARGS) $${srcdiroption} \ - --with-target-subdir="$(TARGET_SUBDIR)" \ + echo "Doing info in $(TARGET_SUBDIR)/libjava" ; \ + for flag in $(EXTRA_TARGET_FLAGS); do \ + eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \ + done; \ + (cd $(TARGET_SUBDIR)/libjava && \ + $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \ + "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \ + "RANLIB=$${RANLIB}" \ + "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" \ + info) \ || exit 1 -.PHONY: all-target-newlib maybe-all-target-newlib -maybe-all-target-newlib: -all-target-newlib: configure-target-newlib - @r=`${PWD_COMMAND}`; export r; \ - s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ - $(SET_LIB_PATH) \ - (cd $(TARGET_SUBDIR)/newlib && \ - $(MAKE) $(TARGET_FLAGS_TO_PASS) all) -.PHONY: check-target-newlib maybe-check-target-newlib -maybe-check-target-newlib: +.PHONY: maybe-dvi-target-libjava dvi-target-libjava +maybe-dvi-target-libjava: -check-target-newlib: - @r=`${PWD_COMMAND}`; export r; \ +dvi-target-libjava: \ + configure-target-libjava + @[ -f $(TARGET_SUBDIR)/libjava/Makefile ] || exit 0 ; \ + r=`${PWD_COMMAND}`; export r; \ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ $(SET_LIB_PATH) \ - (cd $(TARGET_SUBDIR)/newlib && \ - $(MAKE) $(TARGET_FLAGS_TO_PASS) check) + echo "Doing dvi in $(TARGET_SUBDIR)/libjava" ; \ + for flag in $(EXTRA_TARGET_FLAGS); do \ + eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \ + done; \ + (cd $(TARGET_SUBDIR)/libjava && \ + $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \ + "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \ + "RANLIB=$${RANLIB}" \ + "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" \ + dvi) \ + || exit 1 -.PHONY: install-target-newlib maybe-install-target-newlib -maybe-install-target-newlib: +.PHONY: maybe-TAGS-target-libjava TAGS-target-libjava +maybe-TAGS-target-libjava: -install-target-newlib: installdirs - @r=`${PWD_COMMAND}`; export r; \ +TAGS-target-libjava: \ + configure-target-libjava + @[ -f $(TARGET_SUBDIR)/libjava/Makefile ] || exit 0 ; \ + r=`${PWD_COMMAND}`; export r; \ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ $(SET_LIB_PATH) \ - (cd $(TARGET_SUBDIR)/newlib && \ - $(MAKE) $(TARGET_FLAGS_TO_PASS) install) - + echo "Doing TAGS in $(TARGET_SUBDIR)/libjava" ; \ + for flag in $(EXTRA_TARGET_FLAGS); do \ + eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \ + done; \ + (cd $(TARGET_SUBDIR)/libjava && \ + $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \ + "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \ + "RANLIB=$${RANLIB}" \ + "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" \ + TAGS) \ + || exit 1 -.PHONY: configure-target-libf2c maybe-configure-target-libf2c -maybe-configure-target-libf2c: -# There's only one multilib.out. Cleverer subdirs shouldn't need it copied. -$(TARGET_SUBDIR)/libf2c/multilib.out: multilib.out - $(SHELL) $(srcdir)/mkinstalldirs $(TARGET_SUBDIR)/libf2c ; \ - rm -f $(TARGET_SUBDIR)/libf2c/Makefile || : ; \ - cp multilib.out $(TARGET_SUBDIR)/libf2c/multilib.out +.PHONY: maybe-install-info-target-libjava install-info-target-libjava +maybe-install-info-target-libjava: -configure-target-libf2c: $(TARGET_SUBDIR)/libf2c/multilib.out - @test ! -f $(TARGET_SUBDIR)/libf2c/Makefile || exit 0; \ - $(SHELL) $(srcdir)/mkinstalldirs $(TARGET_SUBDIR)/libf2c ; \ +install-info-target-libjava: \ + configure-target-libjava \ + info-target-libjava + @[ -f $(TARGET_SUBDIR)/libjava/Makefile ] || exit 0 ; \ r=`${PWD_COMMAND}`; export r; \ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ $(SET_LIB_PATH) \ - AR="$(AR_FOR_TARGET)"; export AR; \ - AS="$(AS_FOR_TARGET)"; export AS; \ - CC="$(CC_FOR_TARGET)"; export CC; \ - CFLAGS="$(CFLAGS_FOR_TARGET)"; export CFLAGS; \ - CONFIG_SHELL="$(SHELL)"; export CONFIG_SHELL; \ - CPPFLAGS="$(CFLAGS_FOR_TARGET)"; export CPPFLAGS; \ - CXX="$(CXX_FOR_TARGET)"; export CXX; \ - CXXFLAGS="$(CXXFLAGS_FOR_TARGET)"; export CXXFLAGS; \ - GCJ="$(GCJ_FOR_TARGET)"; export GCJ; \ - DLLTOOL="$(DLLTOOL_FOR_TARGET)"; export DLLTOOL; \ - LD="$(LD_FOR_TARGET)"; export LD; \ - LDFLAGS="$(LDFLAGS_FOR_TARGET)"; export LDFLAGS; \ - NM="$(NM_FOR_TARGET)"; export NM; \ - RANLIB="$(RANLIB_FOR_TARGET)"; export RANLIB; \ - WINDRES="$(WINDRES_FOR_TARGET)"; export WINDRES; \ - echo Configuring in $(TARGET_SUBDIR)/libf2c; \ - cd "$(TARGET_SUBDIR)/libf2c" || exit 1; \ - case $(srcdir) in \ - /* | [A-Za-z]:[\\/]*) \ - topdir=$(srcdir) ;; \ - *) \ - case "$(TARGET_SUBDIR)" in \ - .) topdir="../$(srcdir)" ;; \ - *) topdir="../../$(srcdir)" ;; \ - esac ;; \ - esac; \ - srcdiroption="--srcdir=$${topdir}/libf2c"; \ - libsrcdir="$$s/libf2c"; \ - rm -f no-such-file || : ; \ - CONFIG_SITE=no-such-file $(SHELL) $${libsrcdir}/configure \ - $(TARGET_CONFIGARGS) $${srcdiroption} \ - --with-target-subdir="$(TARGET_SUBDIR)" \ + echo "Doing install-info in $(TARGET_SUBDIR)/libjava" ; \ + for flag in $(EXTRA_TARGET_FLAGS); do \ + eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \ + done; \ + (cd $(TARGET_SUBDIR)/libjava && \ + $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \ + "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \ + "RANLIB=$${RANLIB}" \ + "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" \ + install-info) \ || exit 1 -.PHONY: all-target-libf2c maybe-all-target-libf2c -maybe-all-target-libf2c: -all-target-libf2c: configure-target-libf2c - @r=`${PWD_COMMAND}`; export r; \ - s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ - $(SET_LIB_PATH) \ - (cd $(TARGET_SUBDIR)/libf2c && \ - $(MAKE) $(TARGET_FLAGS_TO_PASS) all) -.PHONY: check-target-libf2c maybe-check-target-libf2c -maybe-check-target-libf2c: +.PHONY: maybe-installcheck-target-libjava installcheck-target-libjava +maybe-installcheck-target-libjava: -check-target-libf2c: - @r=`${PWD_COMMAND}`; export r; \ +installcheck-target-libjava: \ + configure-target-libjava + @[ -f $(TARGET_SUBDIR)/libjava/Makefile ] || exit 0 ; \ + r=`${PWD_COMMAND}`; export r; \ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ $(SET_LIB_PATH) \ - (cd $(TARGET_SUBDIR)/libf2c && \ - $(MAKE) $(TARGET_FLAGS_TO_PASS) check) + echo "Doing installcheck in $(TARGET_SUBDIR)/libjava" ; \ + for flag in $(EXTRA_TARGET_FLAGS); do \ + eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \ + done; \ + (cd $(TARGET_SUBDIR)/libjava && \ + $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \ + "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \ + "RANLIB=$${RANLIB}" \ + "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" \ + installcheck) \ + || exit 1 -.PHONY: install-target-libf2c maybe-install-target-libf2c -maybe-install-target-libf2c: +.PHONY: maybe-mostlyclean-target-libjava mostlyclean-target-libjava +maybe-mostlyclean-target-libjava: -install-target-libf2c: installdirs - @r=`${PWD_COMMAND}`; export r; \ +mostlyclean-target-libjava: + @[ -f $(TARGET_SUBDIR)/libjava/Makefile ] || exit 0 ; \ + r=`${PWD_COMMAND}`; export r; \ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ $(SET_LIB_PATH) \ - (cd $(TARGET_SUBDIR)/libf2c && \ - $(MAKE) $(TARGET_FLAGS_TO_PASS) install) - + echo "Doing mostlyclean in $(TARGET_SUBDIR)/libjava" ; \ + for flag in $(EXTRA_TARGET_FLAGS); do \ + eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \ + done; \ + (cd $(TARGET_SUBDIR)/libjava && \ + $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \ + "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \ + "RANLIB=$${RANLIB}" \ + "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" \ + mostlyclean) \ + || exit 1 -.PHONY: configure-target-libobjc maybe-configure-target-libobjc -maybe-configure-target-libobjc: -# There's only one multilib.out. Cleverer subdirs shouldn't need it copied. -$(TARGET_SUBDIR)/libobjc/multilib.out: multilib.out - $(SHELL) $(srcdir)/mkinstalldirs $(TARGET_SUBDIR)/libobjc ; \ - rm -f $(TARGET_SUBDIR)/libobjc/Makefile || : ; \ - cp multilib.out $(TARGET_SUBDIR)/libobjc/multilib.out +.PHONY: maybe-clean-target-libjava clean-target-libjava +maybe-clean-target-libjava: -configure-target-libobjc: $(TARGET_SUBDIR)/libobjc/multilib.out - @test ! -f $(TARGET_SUBDIR)/libobjc/Makefile || exit 0; \ - $(SHELL) $(srcdir)/mkinstalldirs $(TARGET_SUBDIR)/libobjc ; \ +clean-target-libjava: + @[ -f $(TARGET_SUBDIR)/libjava/Makefile ] || exit 0 ; \ r=`${PWD_COMMAND}`; export r; \ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ $(SET_LIB_PATH) \ - AR="$(AR_FOR_TARGET)"; export AR; \ - AS="$(AS_FOR_TARGET)"; export AS; \ - CC="$(CC_FOR_TARGET)"; export CC; \ - CFLAGS="$(CFLAGS_FOR_TARGET)"; export CFLAGS; \ - CONFIG_SHELL="$(SHELL)"; export CONFIG_SHELL; \ - CPPFLAGS="$(CFLAGS_FOR_TARGET)"; export CPPFLAGS; \ - CXX="$(CXX_FOR_TARGET)"; export CXX; \ - CXXFLAGS="$(CXXFLAGS_FOR_TARGET)"; export CXXFLAGS; \ - GCJ="$(GCJ_FOR_TARGET)"; export GCJ; \ - DLLTOOL="$(DLLTOOL_FOR_TARGET)"; export DLLTOOL; \ - LD="$(LD_FOR_TARGET)"; export LD; \ - LDFLAGS="$(LDFLAGS_FOR_TARGET)"; export LDFLAGS; \ - NM="$(NM_FOR_TARGET)"; export NM; \ - RANLIB="$(RANLIB_FOR_TARGET)"; export RANLIB; \ - WINDRES="$(WINDRES_FOR_TARGET)"; export WINDRES; \ - echo Configuring in $(TARGET_SUBDIR)/libobjc; \ - cd "$(TARGET_SUBDIR)/libobjc" || exit 1; \ - case $(srcdir) in \ - /* | [A-Za-z]:[\\/]*) \ - topdir=$(srcdir) ;; \ - *) \ - case "$(TARGET_SUBDIR)" in \ - .) topdir="../$(srcdir)" ;; \ - *) topdir="../../$(srcdir)" ;; \ - esac ;; \ - esac; \ - srcdiroption="--srcdir=$${topdir}/libobjc"; \ - libsrcdir="$$s/libobjc"; \ - rm -f no-such-file || : ; \ - CONFIG_SITE=no-such-file $(SHELL) $${libsrcdir}/configure \ - $(TARGET_CONFIGARGS) $${srcdiroption} \ - --with-target-subdir="$(TARGET_SUBDIR)" \ + echo "Doing clean in $(TARGET_SUBDIR)/libjava" ; \ + for flag in $(EXTRA_TARGET_FLAGS); do \ + eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \ + done; \ + (cd $(TARGET_SUBDIR)/libjava && \ + $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \ + "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \ + "RANLIB=$${RANLIB}" \ + "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" \ + clean) \ || exit 1 -.PHONY: all-target-libobjc maybe-all-target-libobjc -maybe-all-target-libobjc: -all-target-libobjc: configure-target-libobjc - @r=`${PWD_COMMAND}`; export r; \ - s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ - $(SET_LIB_PATH) \ - (cd $(TARGET_SUBDIR)/libobjc && \ - $(MAKE) $(TARGET_FLAGS_TO_PASS) all) -.PHONY: check-target-libobjc maybe-check-target-libobjc -maybe-check-target-libobjc: +.PHONY: maybe-distclean-target-libjava distclean-target-libjava +maybe-distclean-target-libjava: -check-target-libobjc: - @r=`${PWD_COMMAND}`; export r; \ +distclean-target-libjava: + @[ -f $(TARGET_SUBDIR)/libjava/Makefile ] || exit 0 ; \ + r=`${PWD_COMMAND}`; export r; \ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ $(SET_LIB_PATH) \ - (cd $(TARGET_SUBDIR)/libobjc && \ - $(MAKE) $(TARGET_FLAGS_TO_PASS) check) + echo "Doing distclean in $(TARGET_SUBDIR)/libjava" ; \ + for flag in $(EXTRA_TARGET_FLAGS); do \ + eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \ + done; \ + (cd $(TARGET_SUBDIR)/libjava && \ + $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \ + "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \ + "RANLIB=$${RANLIB}" \ + "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" \ + distclean) \ + || exit 1 -.PHONY: install-target-libobjc maybe-install-target-libobjc -maybe-install-target-libobjc: +.PHONY: maybe-maintainer-clean-target-libjava maintainer-clean-target-libjava +maybe-maintainer-clean-target-libjava: -install-target-libobjc: installdirs - @r=`${PWD_COMMAND}`; export r; \ +maintainer-clean-target-libjava: + @[ -f $(TARGET_SUBDIR)/libjava/Makefile ] || exit 0 ; \ + r=`${PWD_COMMAND}`; export r; \ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ $(SET_LIB_PATH) \ - (cd $(TARGET_SUBDIR)/libobjc && \ - $(MAKE) $(TARGET_FLAGS_TO_PASS) install) + echo "Doing maintainer-clean in $(TARGET_SUBDIR)/libjava" ; \ + for flag in $(EXTRA_TARGET_FLAGS); do \ + eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \ + done; \ + (cd $(TARGET_SUBDIR)/libjava && \ + $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \ + "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \ + "RANLIB=$${RANLIB}" \ + "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" \ + maintainer-clean) \ + || exit 1 -.PHONY: configure-target-libtermcap maybe-configure-target-libtermcap -maybe-configure-target-libtermcap: + +.PHONY: configure-target-zlib maybe-configure-target-zlib +maybe-configure-target-zlib: # There's only one multilib.out. Cleverer subdirs shouldn't need it copied. -$(TARGET_SUBDIR)/libtermcap/multilib.out: multilib.out - $(SHELL) $(srcdir)/mkinstalldirs $(TARGET_SUBDIR)/libtermcap ; \ - rm -f $(TARGET_SUBDIR)/libtermcap/Makefile || : ; \ - cp multilib.out $(TARGET_SUBDIR)/libtermcap/multilib.out +$(TARGET_SUBDIR)/zlib/multilib.out: multilib.out + $(SHELL) $(srcdir)/mkinstalldirs $(TARGET_SUBDIR)/zlib ; \ + rm -f $(TARGET_SUBDIR)/zlib/Makefile || : ; \ + cp multilib.out $(TARGET_SUBDIR)/zlib/multilib.out -configure-target-libtermcap: $(TARGET_SUBDIR)/libtermcap/multilib.out - @test ! -f $(TARGET_SUBDIR)/libtermcap/Makefile || exit 0; \ - $(SHELL) $(srcdir)/mkinstalldirs $(TARGET_SUBDIR)/libtermcap ; \ +configure-target-zlib: $(TARGET_SUBDIR)/zlib/multilib.out + @test ! -f $(TARGET_SUBDIR)/zlib/Makefile || exit 0; \ + $(SHELL) $(srcdir)/mkinstalldirs $(TARGET_SUBDIR)/zlib ; \ r=`${PWD_COMMAND}`; export r; \ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ $(SET_LIB_PATH) \ @@ -22502,8 +22162,8 @@ configure-target-libtermcap: $(TARGET_SUBDIR)/libtermcap/multilib.out NM="$(NM_FOR_TARGET)"; export NM; \ RANLIB="$(RANLIB_FOR_TARGET)"; export RANLIB; \ WINDRES="$(WINDRES_FOR_TARGET)"; export WINDRES; \ - echo Configuring in $(TARGET_SUBDIR)/libtermcap; \ - cd "$(TARGET_SUBDIR)/libtermcap" || exit 1; \ + echo Configuring in $(TARGET_SUBDIR)/zlib; \ + cd "$(TARGET_SUBDIR)/zlib" || exit 1; \ case $(srcdir) in \ /* | [A-Za-z]:[\\/]*) \ topdir=$(srcdir) ;; \ @@ -22515,7 +22175,7 @@ configure-target-libtermcap: $(TARGET_SUBDIR)/libtermcap/multilib.out esac; \ if [ "$(srcdir)" = "." ] ; then \ if [ "$(TARGET_SUBDIR)" != "." ] ; then \ - if $(SHELL) $$s/symlink-tree $${topdir}/libtermcap "no-such-file" ; then \ + if $(SHELL) $$s/symlink-tree $${topdir}/zlib "no-such-file" ; then \ if [ -f Makefile ]; then \ if $(MAKE) distclean; then \ true; \ @@ -22534,8 +22194,8 @@ configure-target-libtermcap: $(TARGET_SUBDIR)/libtermcap/multilib.out srcdiroption="--srcdir=."; \ libsrcdir="."; \ else \ - srcdiroption="--srcdir=$${topdir}/libtermcap"; \ - libsrcdir="$$s/libtermcap"; \ + srcdiroption="--srcdir=$${topdir}/zlib"; \ + libsrcdir="$$s/zlib"; \ fi; \ rm -f no-such-file || : ; \ CONFIG_SITE=no-such-file $(SHELL) $${libsrcdir}/configure \ @@ -22543,281 +22203,247 @@ configure-target-libtermcap: $(TARGET_SUBDIR)/libtermcap/multilib.out --with-target-subdir="$(TARGET_SUBDIR)" \ || exit 1 -.PHONY: all-target-libtermcap maybe-all-target-libtermcap -maybe-all-target-libtermcap: -all-target-libtermcap: configure-target-libtermcap +.PHONY: all-target-zlib maybe-all-target-zlib +maybe-all-target-zlib: +all-target-zlib: configure-target-zlib @r=`${PWD_COMMAND}`; export r; \ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ $(SET_LIB_PATH) \ - (cd $(TARGET_SUBDIR)/libtermcap && \ + (cd $(TARGET_SUBDIR)/zlib && \ $(MAKE) $(TARGET_FLAGS_TO_PASS) all) -.PHONY: check-target-libtermcap maybe-check-target-libtermcap -maybe-check-target-libtermcap: +.PHONY: check-target-zlib maybe-check-target-zlib +maybe-check-target-zlib: -# Dummy target for uncheckable module. -check-target-libtermcap: +check-target-zlib: + @r=`${PWD_COMMAND}`; export r; \ + s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ + $(SET_LIB_PATH) \ + (cd $(TARGET_SUBDIR)/zlib && \ + $(MAKE) $(TARGET_FLAGS_TO_PASS) check) -.PHONY: install-target-libtermcap maybe-install-target-libtermcap -maybe-install-target-libtermcap: +.PHONY: install-target-zlib maybe-install-target-zlib +maybe-install-target-zlib: -install-target-libtermcap: installdirs +install-target-zlib: installdirs @r=`${PWD_COMMAND}`; export r; \ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ $(SET_LIB_PATH) \ - (cd $(TARGET_SUBDIR)/libtermcap && \ + (cd $(TARGET_SUBDIR)/zlib && \ $(MAKE) $(TARGET_FLAGS_TO_PASS) install) -.PHONY: configure-target-winsup maybe-configure-target-winsup -maybe-configure-target-winsup: +# Other targets (info, dvi, etc.) -# There's only one multilib.out. Cleverer subdirs shouldn't need it copied. -$(TARGET_SUBDIR)/winsup/multilib.out: multilib.out - $(SHELL) $(srcdir)/mkinstalldirs $(TARGET_SUBDIR)/winsup ; \ - rm -f $(TARGET_SUBDIR)/winsup/Makefile || : ; \ - cp multilib.out $(TARGET_SUBDIR)/winsup/multilib.out +.PHONY: maybe-info-target-zlib info-target-zlib +maybe-info-target-zlib: -configure-target-winsup: $(TARGET_SUBDIR)/winsup/multilib.out - @test ! -f $(TARGET_SUBDIR)/winsup/Makefile || exit 0; \ - $(SHELL) $(srcdir)/mkinstalldirs $(TARGET_SUBDIR)/winsup ; \ +info-target-zlib: \ + configure-target-zlib + @[ -f $(TARGET_SUBDIR)/zlib/Makefile ] || exit 0 ; \ r=`${PWD_COMMAND}`; export r; \ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ $(SET_LIB_PATH) \ - AR="$(AR_FOR_TARGET)"; export AR; \ - AS="$(AS_FOR_TARGET)"; export AS; \ - CC="$(CC_FOR_TARGET)"; export CC; \ - CFLAGS="$(CFLAGS_FOR_TARGET)"; export CFLAGS; \ - CONFIG_SHELL="$(SHELL)"; export CONFIG_SHELL; \ - CPPFLAGS="$(CFLAGS_FOR_TARGET)"; export CPPFLAGS; \ - CXX="$(CXX_FOR_TARGET)"; export CXX; \ - CXXFLAGS="$(CXXFLAGS_FOR_TARGET)"; export CXXFLAGS; \ - GCJ="$(GCJ_FOR_TARGET)"; export GCJ; \ - DLLTOOL="$(DLLTOOL_FOR_TARGET)"; export DLLTOOL; \ - LD="$(LD_FOR_TARGET)"; export LD; \ - LDFLAGS="$(LDFLAGS_FOR_TARGET)"; export LDFLAGS; \ - NM="$(NM_FOR_TARGET)"; export NM; \ - RANLIB="$(RANLIB_FOR_TARGET)"; export RANLIB; \ - WINDRES="$(WINDRES_FOR_TARGET)"; export WINDRES; \ - echo Configuring in $(TARGET_SUBDIR)/winsup; \ - cd "$(TARGET_SUBDIR)/winsup" || exit 1; \ - case $(srcdir) in \ - /* | [A-Za-z]:[\\/]*) \ - topdir=$(srcdir) ;; \ - *) \ - case "$(TARGET_SUBDIR)" in \ - .) topdir="../$(srcdir)" ;; \ - *) topdir="../../$(srcdir)" ;; \ - esac ;; \ - esac; \ - srcdiroption="--srcdir=$${topdir}/winsup"; \ - libsrcdir="$$s/winsup"; \ - rm -f no-such-file || : ; \ - CONFIG_SITE=no-such-file $(SHELL) $${libsrcdir}/configure \ - $(TARGET_CONFIGARGS) $${srcdiroption} \ - --with-target-subdir="$(TARGET_SUBDIR)" \ + echo "Doing info in $(TARGET_SUBDIR)/zlib" ; \ + for flag in $(EXTRA_TARGET_FLAGS); do \ + eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \ + done; \ + (cd $(TARGET_SUBDIR)/zlib && \ + $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \ + "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \ + "RANLIB=$${RANLIB}" \ + "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" \ + info) \ || exit 1 -.PHONY: all-target-winsup maybe-all-target-winsup -maybe-all-target-winsup: -all-target-winsup: configure-target-winsup - @r=`${PWD_COMMAND}`; export r; \ - s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ - $(SET_LIB_PATH) \ - (cd $(TARGET_SUBDIR)/winsup && \ - $(MAKE) $(TARGET_FLAGS_TO_PASS) all) -.PHONY: check-target-winsup maybe-check-target-winsup -maybe-check-target-winsup: +.PHONY: maybe-dvi-target-zlib dvi-target-zlib +maybe-dvi-target-zlib: -check-target-winsup: - @r=`${PWD_COMMAND}`; export r; \ +dvi-target-zlib: \ + configure-target-zlib + @[ -f $(TARGET_SUBDIR)/zlib/Makefile ] || exit 0 ; \ + r=`${PWD_COMMAND}`; export r; \ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ $(SET_LIB_PATH) \ - (cd $(TARGET_SUBDIR)/winsup && \ - $(MAKE) $(TARGET_FLAGS_TO_PASS) check) + echo "Doing dvi in $(TARGET_SUBDIR)/zlib" ; \ + for flag in $(EXTRA_TARGET_FLAGS); do \ + eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \ + done; \ + (cd $(TARGET_SUBDIR)/zlib && \ + $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \ + "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \ + "RANLIB=$${RANLIB}" \ + "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" \ + dvi) \ + || exit 1 -.PHONY: install-target-winsup maybe-install-target-winsup -maybe-install-target-winsup: +.PHONY: maybe-TAGS-target-zlib TAGS-target-zlib +maybe-TAGS-target-zlib: -install-target-winsup: installdirs - @r=`${PWD_COMMAND}`; export r; \ +TAGS-target-zlib: \ + configure-target-zlib + @[ -f $(TARGET_SUBDIR)/zlib/Makefile ] || exit 0 ; \ + r=`${PWD_COMMAND}`; export r; \ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ $(SET_LIB_PATH) \ - (cd $(TARGET_SUBDIR)/winsup && \ - $(MAKE) $(TARGET_FLAGS_TO_PASS) install) - + echo "Doing TAGS in $(TARGET_SUBDIR)/zlib" ; \ + for flag in $(EXTRA_TARGET_FLAGS); do \ + eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \ + done; \ + (cd $(TARGET_SUBDIR)/zlib && \ + $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \ + "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \ + "RANLIB=$${RANLIB}" \ + "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" \ + TAGS) \ + || exit 1 -.PHONY: configure-target-libgloss maybe-configure-target-libgloss -maybe-configure-target-libgloss: -# There's only one multilib.out. Cleverer subdirs shouldn't need it copied. -$(TARGET_SUBDIR)/libgloss/multilib.out: multilib.out - $(SHELL) $(srcdir)/mkinstalldirs $(TARGET_SUBDIR)/libgloss ; \ - rm -f $(TARGET_SUBDIR)/libgloss/Makefile || : ; \ - cp multilib.out $(TARGET_SUBDIR)/libgloss/multilib.out +.PHONY: maybe-install-info-target-zlib install-info-target-zlib +maybe-install-info-target-zlib: -configure-target-libgloss: $(TARGET_SUBDIR)/libgloss/multilib.out - @test ! -f $(TARGET_SUBDIR)/libgloss/Makefile || exit 0; \ - $(SHELL) $(srcdir)/mkinstalldirs $(TARGET_SUBDIR)/libgloss ; \ +install-info-target-zlib: \ + configure-target-zlib \ + info-target-zlib + @[ -f $(TARGET_SUBDIR)/zlib/Makefile ] || exit 0 ; \ r=`${PWD_COMMAND}`; export r; \ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ $(SET_LIB_PATH) \ - AR="$(AR_FOR_TARGET)"; export AR; \ - AS="$(AS_FOR_TARGET)"; export AS; \ - CC="$(CC_FOR_TARGET)"; export CC; \ - CFLAGS="$(CFLAGS_FOR_TARGET)"; export CFLAGS; \ - CONFIG_SHELL="$(SHELL)"; export CONFIG_SHELL; \ - CPPFLAGS="$(CFLAGS_FOR_TARGET)"; export CPPFLAGS; \ - CXX="$(CXX_FOR_TARGET)"; export CXX; \ - CXXFLAGS="$(CXXFLAGS_FOR_TARGET)"; export CXXFLAGS; \ - GCJ="$(GCJ_FOR_TARGET)"; export GCJ; \ - DLLTOOL="$(DLLTOOL_FOR_TARGET)"; export DLLTOOL; \ - LD="$(LD_FOR_TARGET)"; export LD; \ - LDFLAGS="$(LDFLAGS_FOR_TARGET)"; export LDFLAGS; \ - NM="$(NM_FOR_TARGET)"; export NM; \ - RANLIB="$(RANLIB_FOR_TARGET)"; export RANLIB; \ - WINDRES="$(WINDRES_FOR_TARGET)"; export WINDRES; \ - echo Configuring in $(TARGET_SUBDIR)/libgloss; \ - cd "$(TARGET_SUBDIR)/libgloss" || exit 1; \ - case $(srcdir) in \ - /* | [A-Za-z]:[\\/]*) \ - topdir=$(srcdir) ;; \ - *) \ - case "$(TARGET_SUBDIR)" in \ - .) topdir="../$(srcdir)" ;; \ - *) topdir="../../$(srcdir)" ;; \ - esac ;; \ - esac; \ - srcdiroption="--srcdir=$${topdir}/libgloss"; \ - libsrcdir="$$s/libgloss"; \ - rm -f no-such-file || : ; \ - CONFIG_SITE=no-such-file $(SHELL) $${libsrcdir}/configure \ - $(TARGET_CONFIGARGS) $${srcdiroption} \ - --with-target-subdir="$(TARGET_SUBDIR)" \ + echo "Doing install-info in $(TARGET_SUBDIR)/zlib" ; \ + for flag in $(EXTRA_TARGET_FLAGS); do \ + eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \ + done; \ + (cd $(TARGET_SUBDIR)/zlib && \ + $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \ + "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \ + "RANLIB=$${RANLIB}" \ + "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" \ + install-info) \ || exit 1 -.PHONY: all-target-libgloss maybe-all-target-libgloss -maybe-all-target-libgloss: -all-target-libgloss: configure-target-libgloss - @r=`${PWD_COMMAND}`; export r; \ - s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ - $(SET_LIB_PATH) \ - (cd $(TARGET_SUBDIR)/libgloss && \ - $(MAKE) $(TARGET_FLAGS_TO_PASS) all) -.PHONY: check-target-libgloss maybe-check-target-libgloss -maybe-check-target-libgloss: +.PHONY: maybe-installcheck-target-zlib installcheck-target-zlib +maybe-installcheck-target-zlib: -# Dummy target for uncheckable module. -check-target-libgloss: +installcheck-target-zlib: \ + configure-target-zlib + @[ -f $(TARGET_SUBDIR)/zlib/Makefile ] || exit 0 ; \ + r=`${PWD_COMMAND}`; export r; \ + s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ + $(SET_LIB_PATH) \ + echo "Doing installcheck in $(TARGET_SUBDIR)/zlib" ; \ + for flag in $(EXTRA_TARGET_FLAGS); do \ + eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \ + done; \ + (cd $(TARGET_SUBDIR)/zlib && \ + $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \ + "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \ + "RANLIB=$${RANLIB}" \ + "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" \ + installcheck) \ + || exit 1 -.PHONY: install-target-libgloss maybe-install-target-libgloss -maybe-install-target-libgloss: +.PHONY: maybe-mostlyclean-target-zlib mostlyclean-target-zlib +maybe-mostlyclean-target-zlib: -install-target-libgloss: installdirs - @r=`${PWD_COMMAND}`; export r; \ +mostlyclean-target-zlib: + @[ -f $(TARGET_SUBDIR)/zlib/Makefile ] || exit 0 ; \ + r=`${PWD_COMMAND}`; export r; \ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ $(SET_LIB_PATH) \ - (cd $(TARGET_SUBDIR)/libgloss && \ - $(MAKE) $(TARGET_FLAGS_TO_PASS) install) - + echo "Doing mostlyclean in $(TARGET_SUBDIR)/zlib" ; \ + for flag in $(EXTRA_TARGET_FLAGS); do \ + eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \ + done; \ + (cd $(TARGET_SUBDIR)/zlib && \ + $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \ + "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \ + "RANLIB=$${RANLIB}" \ + "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" \ + mostlyclean) \ + || exit 1 -.PHONY: configure-target-libiberty maybe-configure-target-libiberty -maybe-configure-target-libiberty: -# There's only one multilib.out. Cleverer subdirs shouldn't need it copied. -$(TARGET_SUBDIR)/libiberty/multilib.out: multilib.out - $(SHELL) $(srcdir)/mkinstalldirs $(TARGET_SUBDIR)/libiberty ; \ - rm -f $(TARGET_SUBDIR)/libiberty/Makefile || : ; \ - cp multilib.out $(TARGET_SUBDIR)/libiberty/multilib.out +.PHONY: maybe-clean-target-zlib clean-target-zlib +maybe-clean-target-zlib: -configure-target-libiberty: $(TARGET_SUBDIR)/libiberty/multilib.out - @test ! -f $(TARGET_SUBDIR)/libiberty/Makefile || exit 0; \ - $(SHELL) $(srcdir)/mkinstalldirs $(TARGET_SUBDIR)/libiberty ; \ +clean-target-zlib: + @[ -f $(TARGET_SUBDIR)/zlib/Makefile ] || exit 0 ; \ r=`${PWD_COMMAND}`; export r; \ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ $(SET_LIB_PATH) \ - AR="$(AR_FOR_TARGET)"; export AR; \ - AS="$(AS_FOR_TARGET)"; export AS; \ - CC="$(CC_FOR_TARGET)"; export CC; \ - CFLAGS="$(CFLAGS_FOR_TARGET)"; export CFLAGS; \ - CONFIG_SHELL="$(SHELL)"; export CONFIG_SHELL; \ - CPPFLAGS="$(CFLAGS_FOR_TARGET)"; export CPPFLAGS; \ - CXX="$(CXX_FOR_TARGET)"; export CXX; \ - CXXFLAGS="$(CXXFLAGS_FOR_TARGET)"; export CXXFLAGS; \ - GCJ="$(GCJ_FOR_TARGET)"; export GCJ; \ - DLLTOOL="$(DLLTOOL_FOR_TARGET)"; export DLLTOOL; \ - LD="$(LD_FOR_TARGET)"; export LD; \ - LDFLAGS="$(LDFLAGS_FOR_TARGET)"; export LDFLAGS; \ - NM="$(NM_FOR_TARGET)"; export NM; \ - RANLIB="$(RANLIB_FOR_TARGET)"; export RANLIB; \ - WINDRES="$(WINDRES_FOR_TARGET)"; export WINDRES; \ - echo Configuring in $(TARGET_SUBDIR)/libiberty; \ - cd "$(TARGET_SUBDIR)/libiberty" || exit 1; \ - case $(srcdir) in \ - /* | [A-Za-z]:[\\/]*) \ - topdir=$(srcdir) ;; \ - *) \ - case "$(TARGET_SUBDIR)" in \ - .) topdir="../$(srcdir)" ;; \ - *) topdir="../../$(srcdir)" ;; \ - esac ;; \ - esac; \ - srcdiroption="--srcdir=$${topdir}/libiberty"; \ - libsrcdir="$$s/libiberty"; \ - rm -f no-such-file || : ; \ - CONFIG_SITE=no-such-file $(SHELL) $${libsrcdir}/configure \ - $(TARGET_CONFIGARGS) $${srcdiroption} \ - --with-target-subdir="$(TARGET_SUBDIR)" \ + echo "Doing clean in $(TARGET_SUBDIR)/zlib" ; \ + for flag in $(EXTRA_TARGET_FLAGS); do \ + eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \ + done; \ + (cd $(TARGET_SUBDIR)/zlib && \ + $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \ + "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \ + "RANLIB=$${RANLIB}" \ + "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" \ + clean) \ || exit 1 -.PHONY: all-target-libiberty maybe-all-target-libiberty -maybe-all-target-libiberty: -all-target-libiberty: configure-target-libiberty - @r=`${PWD_COMMAND}`; export r; \ - s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ - $(SET_LIB_PATH) \ - (cd $(TARGET_SUBDIR)/libiberty && \ - $(MAKE) $(TARGET_FLAGS_TO_PASS) all) -.PHONY: check-target-libiberty maybe-check-target-libiberty -maybe-check-target-libiberty: +.PHONY: maybe-distclean-target-zlib distclean-target-zlib +maybe-distclean-target-zlib: -check-target-libiberty: - @r=`${PWD_COMMAND}`; export r; \ +distclean-target-zlib: + @[ -f $(TARGET_SUBDIR)/zlib/Makefile ] || exit 0 ; \ + r=`${PWD_COMMAND}`; export r; \ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ $(SET_LIB_PATH) \ - (cd $(TARGET_SUBDIR)/libiberty && \ - $(MAKE) $(TARGET_FLAGS_TO_PASS) check) + echo "Doing distclean in $(TARGET_SUBDIR)/zlib" ; \ + for flag in $(EXTRA_TARGET_FLAGS); do \ + eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \ + done; \ + (cd $(TARGET_SUBDIR)/zlib && \ + $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \ + "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \ + "RANLIB=$${RANLIB}" \ + "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" \ + distclean) \ + || exit 1 -.PHONY: install-target-libiberty maybe-install-target-libiberty -maybe-install-target-libiberty: +.PHONY: maybe-maintainer-clean-target-zlib maintainer-clean-target-zlib +maybe-maintainer-clean-target-zlib: -install-target-libiberty: installdirs - @r=`${PWD_COMMAND}`; export r; \ +maintainer-clean-target-zlib: + @[ -f $(TARGET_SUBDIR)/zlib/Makefile ] || exit 0 ; \ + r=`${PWD_COMMAND}`; export r; \ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ $(SET_LIB_PATH) \ - (cd $(TARGET_SUBDIR)/libiberty && \ - $(MAKE) $(TARGET_FLAGS_TO_PASS) install) + echo "Doing maintainer-clean in $(TARGET_SUBDIR)/zlib" ; \ + for flag in $(EXTRA_TARGET_FLAGS); do \ + eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \ + done; \ + (cd $(TARGET_SUBDIR)/zlib && \ + $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \ + "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \ + "RANLIB=$${RANLIB}" \ + "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" \ + maintainer-clean) \ + || exit 1 -.PHONY: configure-target-gperf maybe-configure-target-gperf -maybe-configure-target-gperf: + +.PHONY: configure-target-boehm-gc maybe-configure-target-boehm-gc +maybe-configure-target-boehm-gc: # There's only one multilib.out. Cleverer subdirs shouldn't need it copied. -$(TARGET_SUBDIR)/gperf/multilib.out: multilib.out - $(SHELL) $(srcdir)/mkinstalldirs $(TARGET_SUBDIR)/gperf ; \ - rm -f $(TARGET_SUBDIR)/gperf/Makefile || : ; \ - cp multilib.out $(TARGET_SUBDIR)/gperf/multilib.out +$(TARGET_SUBDIR)/boehm-gc/multilib.out: multilib.out + $(SHELL) $(srcdir)/mkinstalldirs $(TARGET_SUBDIR)/boehm-gc ; \ + rm -f $(TARGET_SUBDIR)/boehm-gc/Makefile || : ; \ + cp multilib.out $(TARGET_SUBDIR)/boehm-gc/multilib.out -configure-target-gperf: $(TARGET_SUBDIR)/gperf/multilib.out - @test ! -f $(TARGET_SUBDIR)/gperf/Makefile || exit 0; \ - $(SHELL) $(srcdir)/mkinstalldirs $(TARGET_SUBDIR)/gperf ; \ +configure-target-boehm-gc: $(TARGET_SUBDIR)/boehm-gc/multilib.out + @test ! -f $(TARGET_SUBDIR)/boehm-gc/Makefile || exit 0; \ + $(SHELL) $(srcdir)/mkinstalldirs $(TARGET_SUBDIR)/boehm-gc ; \ r=`${PWD_COMMAND}`; export r; \ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ $(SET_LIB_PATH) \ @@ -22836,8 +22462,8 @@ configure-target-gperf: $(TARGET_SUBDIR)/gperf/multilib.out NM="$(NM_FOR_TARGET)"; export NM; \ RANLIB="$(RANLIB_FOR_TARGET)"; export RANLIB; \ WINDRES="$(WINDRES_FOR_TARGET)"; export WINDRES; \ - echo Configuring in $(TARGET_SUBDIR)/gperf; \ - cd "$(TARGET_SUBDIR)/gperf" || exit 1; \ + echo Configuring in $(TARGET_SUBDIR)/boehm-gc; \ + cd "$(TARGET_SUBDIR)/boehm-gc" || exit 1; \ case $(srcdir) in \ /* | [A-Za-z]:[\\/]*) \ topdir=$(srcdir) ;; \ @@ -22847,290 +22473,255 @@ configure-target-gperf: $(TARGET_SUBDIR)/gperf/multilib.out *) topdir="../../$(srcdir)" ;; \ esac ;; \ esac; \ - srcdiroption="--srcdir=$${topdir}/gperf"; \ - libsrcdir="$$s/gperf"; \ + srcdiroption="--srcdir=$${topdir}/boehm-gc"; \ + libsrcdir="$$s/boehm-gc"; \ rm -f no-such-file || : ; \ CONFIG_SITE=no-such-file $(SHELL) $${libsrcdir}/configure \ $(TARGET_CONFIGARGS) $${srcdiroption} \ --with-target-subdir="$(TARGET_SUBDIR)" \ || exit 1 -.PHONY: all-target-gperf maybe-all-target-gperf -maybe-all-target-gperf: -all-target-gperf: configure-target-gperf +.PHONY: all-target-boehm-gc maybe-all-target-boehm-gc +maybe-all-target-boehm-gc: +all-target-boehm-gc: configure-target-boehm-gc @r=`${PWD_COMMAND}`; export r; \ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ $(SET_LIB_PATH) \ - (cd $(TARGET_SUBDIR)/gperf && \ + (cd $(TARGET_SUBDIR)/boehm-gc && \ $(MAKE) $(TARGET_FLAGS_TO_PASS) all) -.PHONY: check-target-gperf maybe-check-target-gperf -maybe-check-target-gperf: +.PHONY: check-target-boehm-gc maybe-check-target-boehm-gc +maybe-check-target-boehm-gc: -check-target-gperf: +check-target-boehm-gc: @r=`${PWD_COMMAND}`; export r; \ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ $(SET_LIB_PATH) \ - (cd $(TARGET_SUBDIR)/gperf && \ + (cd $(TARGET_SUBDIR)/boehm-gc && \ $(MAKE) $(TARGET_FLAGS_TO_PASS) check) -.PHONY: install-target-gperf maybe-install-target-gperf -maybe-install-target-gperf: +.PHONY: install-target-boehm-gc maybe-install-target-boehm-gc +maybe-install-target-boehm-gc: -install-target-gperf: installdirs +install-target-boehm-gc: installdirs @r=`${PWD_COMMAND}`; export r; \ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ $(SET_LIB_PATH) \ - (cd $(TARGET_SUBDIR)/gperf && \ + (cd $(TARGET_SUBDIR)/boehm-gc && \ $(MAKE) $(TARGET_FLAGS_TO_PASS) install) -.PHONY: configure-target-examples maybe-configure-target-examples -maybe-configure-target-examples: +# Other targets (info, dvi, etc.) -# There's only one multilib.out. Cleverer subdirs shouldn't need it copied. -$(TARGET_SUBDIR)/examples/multilib.out: multilib.out - $(SHELL) $(srcdir)/mkinstalldirs $(TARGET_SUBDIR)/examples ; \ - rm -f $(TARGET_SUBDIR)/examples/Makefile || : ; \ - cp multilib.out $(TARGET_SUBDIR)/examples/multilib.out +.PHONY: maybe-info-target-boehm-gc info-target-boehm-gc +maybe-info-target-boehm-gc: -configure-target-examples: $(TARGET_SUBDIR)/examples/multilib.out - @test ! -f $(TARGET_SUBDIR)/examples/Makefile || exit 0; \ - $(SHELL) $(srcdir)/mkinstalldirs $(TARGET_SUBDIR)/examples ; \ +info-target-boehm-gc: \ + configure-target-boehm-gc + @[ -f $(TARGET_SUBDIR)/boehm-gc/Makefile ] || exit 0 ; \ r=`${PWD_COMMAND}`; export r; \ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ $(SET_LIB_PATH) \ - AR="$(AR_FOR_TARGET)"; export AR; \ - AS="$(AS_FOR_TARGET)"; export AS; \ - CC="$(CC_FOR_TARGET)"; export CC; \ - CFLAGS="$(CFLAGS_FOR_TARGET)"; export CFLAGS; \ - CONFIG_SHELL="$(SHELL)"; export CONFIG_SHELL; \ - CPPFLAGS="$(CFLAGS_FOR_TARGET)"; export CPPFLAGS; \ - CXX="$(CXX_FOR_TARGET)"; export CXX; \ - CXXFLAGS="$(CXXFLAGS_FOR_TARGET)"; export CXXFLAGS; \ - GCJ="$(GCJ_FOR_TARGET)"; export GCJ; \ - DLLTOOL="$(DLLTOOL_FOR_TARGET)"; export DLLTOOL; \ - LD="$(LD_FOR_TARGET)"; export LD; \ - LDFLAGS="$(LDFLAGS_FOR_TARGET)"; export LDFLAGS; \ - NM="$(NM_FOR_TARGET)"; export NM; \ - RANLIB="$(RANLIB_FOR_TARGET)"; export RANLIB; \ - WINDRES="$(WINDRES_FOR_TARGET)"; export WINDRES; \ - echo Configuring in $(TARGET_SUBDIR)/examples; \ - cd "$(TARGET_SUBDIR)/examples" || exit 1; \ - case $(srcdir) in \ - /* | [A-Za-z]:[\\/]*) \ - topdir=$(srcdir) ;; \ - *) \ - case "$(TARGET_SUBDIR)" in \ - .) topdir="../$(srcdir)" ;; \ - *) topdir="../../$(srcdir)" ;; \ - esac ;; \ - esac; \ - srcdiroption="--srcdir=$${topdir}/examples"; \ - libsrcdir="$$s/examples"; \ - rm -f no-such-file || : ; \ - CONFIG_SITE=no-such-file $(SHELL) $${libsrcdir}/configure \ - $(TARGET_CONFIGARGS) $${srcdiroption} \ - --with-target-subdir="$(TARGET_SUBDIR)" \ + echo "Doing info in $(TARGET_SUBDIR)/boehm-gc" ; \ + for flag in $(EXTRA_TARGET_FLAGS); do \ + eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \ + done; \ + (cd $(TARGET_SUBDIR)/boehm-gc && \ + $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \ + "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \ + "RANLIB=$${RANLIB}" \ + "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" \ + info) \ || exit 1 -.PHONY: all-target-examples maybe-all-target-examples -maybe-all-target-examples: -all-target-examples: configure-target-examples - @r=`${PWD_COMMAND}`; export r; \ - s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ - $(SET_LIB_PATH) \ - (cd $(TARGET_SUBDIR)/examples && \ - $(MAKE) $(TARGET_FLAGS_TO_PASS) all) - -.PHONY: check-target-examples maybe-check-target-examples -maybe-check-target-examples: -# Dummy target for uncheckable module. -check-target-examples: +.PHONY: maybe-dvi-target-boehm-gc dvi-target-boehm-gc +maybe-dvi-target-boehm-gc: +dvi-target-boehm-gc: \ + configure-target-boehm-gc + @[ -f $(TARGET_SUBDIR)/boehm-gc/Makefile ] || exit 0 ; \ + r=`${PWD_COMMAND}`; export r; \ + s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ + $(SET_LIB_PATH) \ + echo "Doing dvi in $(TARGET_SUBDIR)/boehm-gc" ; \ + for flag in $(EXTRA_TARGET_FLAGS); do \ + eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \ + done; \ + (cd $(TARGET_SUBDIR)/boehm-gc && \ + $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \ + "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \ + "RANLIB=$${RANLIB}" \ + "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" \ + dvi) \ + || exit 1 -.PHONY: install-target-examples maybe-install-target-examples -maybe-install-target-examples: -# Dummy target for uninstallable. -install-target-examples: +.PHONY: maybe-TAGS-target-boehm-gc TAGS-target-boehm-gc +maybe-TAGS-target-boehm-gc: +TAGS-target-boehm-gc: \ + configure-target-boehm-gc + @[ -f $(TARGET_SUBDIR)/boehm-gc/Makefile ] || exit 0 ; \ + r=`${PWD_COMMAND}`; export r; \ + s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ + $(SET_LIB_PATH) \ + echo "Doing TAGS in $(TARGET_SUBDIR)/boehm-gc" ; \ + for flag in $(EXTRA_TARGET_FLAGS); do \ + eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \ + done; \ + (cd $(TARGET_SUBDIR)/boehm-gc && \ + $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \ + "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \ + "RANLIB=$${RANLIB}" \ + "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" \ + TAGS) \ + || exit 1 -.PHONY: configure-target-libffi maybe-configure-target-libffi -maybe-configure-target-libffi: -# There's only one multilib.out. Cleverer subdirs shouldn't need it copied. -$(TARGET_SUBDIR)/libffi/multilib.out: multilib.out - $(SHELL) $(srcdir)/mkinstalldirs $(TARGET_SUBDIR)/libffi ; \ - rm -f $(TARGET_SUBDIR)/libffi/Makefile || : ; \ - cp multilib.out $(TARGET_SUBDIR)/libffi/multilib.out +.PHONY: maybe-install-info-target-boehm-gc install-info-target-boehm-gc +maybe-install-info-target-boehm-gc: -configure-target-libffi: $(TARGET_SUBDIR)/libffi/multilib.out - @test ! -f $(TARGET_SUBDIR)/libffi/Makefile || exit 0; \ - $(SHELL) $(srcdir)/mkinstalldirs $(TARGET_SUBDIR)/libffi ; \ +install-info-target-boehm-gc: \ + configure-target-boehm-gc \ + info-target-boehm-gc + @[ -f $(TARGET_SUBDIR)/boehm-gc/Makefile ] || exit 0 ; \ r=`${PWD_COMMAND}`; export r; \ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ $(SET_LIB_PATH) \ - AR="$(AR_FOR_TARGET)"; export AR; \ - AS="$(AS_FOR_TARGET)"; export AS; \ - CC="$(CC_FOR_TARGET)"; export CC; \ - CFLAGS="$(CFLAGS_FOR_TARGET)"; export CFLAGS; \ - CONFIG_SHELL="$(SHELL)"; export CONFIG_SHELL; \ - CPPFLAGS="$(CFLAGS_FOR_TARGET)"; export CPPFLAGS; \ - CXX="$(CXX_FOR_TARGET)"; export CXX; \ - CXXFLAGS="$(CXXFLAGS_FOR_TARGET)"; export CXXFLAGS; \ - GCJ="$(GCJ_FOR_TARGET)"; export GCJ; \ - DLLTOOL="$(DLLTOOL_FOR_TARGET)"; export DLLTOOL; \ - LD="$(LD_FOR_TARGET)"; export LD; \ - LDFLAGS="$(LDFLAGS_FOR_TARGET)"; export LDFLAGS; \ - NM="$(NM_FOR_TARGET)"; export NM; \ - RANLIB="$(RANLIB_FOR_TARGET)"; export RANLIB; \ - WINDRES="$(WINDRES_FOR_TARGET)"; export WINDRES; \ - echo Configuring in $(TARGET_SUBDIR)/libffi; \ - cd "$(TARGET_SUBDIR)/libffi" || exit 1; \ - case $(srcdir) in \ - /* | [A-Za-z]:[\\/]*) \ - topdir=$(srcdir) ;; \ - *) \ - case "$(TARGET_SUBDIR)" in \ - .) topdir="../$(srcdir)" ;; \ - *) topdir="../../$(srcdir)" ;; \ - esac ;; \ - esac; \ - srcdiroption="--srcdir=$${topdir}/libffi"; \ - libsrcdir="$$s/libffi"; \ - rm -f no-such-file || : ; \ - CONFIG_SITE=no-such-file $(SHELL) $${libsrcdir}/configure \ - $(TARGET_CONFIGARGS) $${srcdiroption} \ - --with-target-subdir="$(TARGET_SUBDIR)" \ + echo "Doing install-info in $(TARGET_SUBDIR)/boehm-gc" ; \ + for flag in $(EXTRA_TARGET_FLAGS); do \ + eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \ + done; \ + (cd $(TARGET_SUBDIR)/boehm-gc && \ + $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \ + "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \ + "RANLIB=$${RANLIB}" \ + "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" \ + install-info) \ || exit 1 -.PHONY: all-target-libffi maybe-all-target-libffi -maybe-all-target-libffi: -all-target-libffi: configure-target-libffi - @r=`${PWD_COMMAND}`; export r; \ - s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ - $(SET_LIB_PATH) \ - (cd $(TARGET_SUBDIR)/libffi && \ - $(MAKE) $(TARGET_FLAGS_TO_PASS) all) -.PHONY: check-target-libffi maybe-check-target-libffi -maybe-check-target-libffi: +.PHONY: maybe-installcheck-target-boehm-gc installcheck-target-boehm-gc +maybe-installcheck-target-boehm-gc: -check-target-libffi: - @r=`${PWD_COMMAND}`; export r; \ +installcheck-target-boehm-gc: \ + configure-target-boehm-gc + @[ -f $(TARGET_SUBDIR)/boehm-gc/Makefile ] || exit 0 ; \ + r=`${PWD_COMMAND}`; export r; \ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ $(SET_LIB_PATH) \ - (cd $(TARGET_SUBDIR)/libffi && \ - $(MAKE) $(TARGET_FLAGS_TO_PASS) check) + echo "Doing installcheck in $(TARGET_SUBDIR)/boehm-gc" ; \ + for flag in $(EXTRA_TARGET_FLAGS); do \ + eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \ + done; \ + (cd $(TARGET_SUBDIR)/boehm-gc && \ + $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \ + "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \ + "RANLIB=$${RANLIB}" \ + "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" \ + installcheck) \ + || exit 1 -.PHONY: install-target-libffi maybe-install-target-libffi -maybe-install-target-libffi: +.PHONY: maybe-mostlyclean-target-boehm-gc mostlyclean-target-boehm-gc +maybe-mostlyclean-target-boehm-gc: -install-target-libffi: installdirs - @r=`${PWD_COMMAND}`; export r; \ +mostlyclean-target-boehm-gc: + @[ -f $(TARGET_SUBDIR)/boehm-gc/Makefile ] || exit 0 ; \ + r=`${PWD_COMMAND}`; export r; \ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ $(SET_LIB_PATH) \ - (cd $(TARGET_SUBDIR)/libffi && \ - $(MAKE) $(TARGET_FLAGS_TO_PASS) install) - + echo "Doing mostlyclean in $(TARGET_SUBDIR)/boehm-gc" ; \ + for flag in $(EXTRA_TARGET_FLAGS); do \ + eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \ + done; \ + (cd $(TARGET_SUBDIR)/boehm-gc && \ + $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \ + "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \ + "RANLIB=$${RANLIB}" \ + "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" \ + mostlyclean) \ + || exit 1 -.PHONY: configure-target-libjava maybe-configure-target-libjava -maybe-configure-target-libjava: -# There's only one multilib.out. Cleverer subdirs shouldn't need it copied. -$(TARGET_SUBDIR)/libjava/multilib.out: multilib.out - $(SHELL) $(srcdir)/mkinstalldirs $(TARGET_SUBDIR)/libjava ; \ - rm -f $(TARGET_SUBDIR)/libjava/Makefile || : ; \ - cp multilib.out $(TARGET_SUBDIR)/libjava/multilib.out +.PHONY: maybe-clean-target-boehm-gc clean-target-boehm-gc +maybe-clean-target-boehm-gc: -configure-target-libjava: $(TARGET_SUBDIR)/libjava/multilib.out - @test ! -f $(TARGET_SUBDIR)/libjava/Makefile || exit 0; \ - $(SHELL) $(srcdir)/mkinstalldirs $(TARGET_SUBDIR)/libjava ; \ +clean-target-boehm-gc: + @[ -f $(TARGET_SUBDIR)/boehm-gc/Makefile ] || exit 0 ; \ r=`${PWD_COMMAND}`; export r; \ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ $(SET_LIB_PATH) \ - AR="$(AR_FOR_TARGET)"; export AR; \ - AS="$(AS_FOR_TARGET)"; export AS; \ - CC="$(CC_FOR_TARGET)"; export CC; \ - CFLAGS="$(CFLAGS_FOR_TARGET)"; export CFLAGS; \ - CONFIG_SHELL="$(SHELL)"; export CONFIG_SHELL; \ - CPPFLAGS="$(CFLAGS_FOR_TARGET)"; export CPPFLAGS; \ - CXX_FOR_TARGET="$(RAW_CXX_FOR_TARGET)"; export CXX_FOR_TARGET; \ - CXX="$(RAW_CXX_FOR_TARGET)"; export CXX; \ - CXXFLAGS="$(CXXFLAGS_FOR_TARGET)"; export CXXFLAGS; \ - GCJ="$(GCJ_FOR_TARGET)"; export GCJ; \ - DLLTOOL="$(DLLTOOL_FOR_TARGET)"; export DLLTOOL; \ - LD="$(LD_FOR_TARGET)"; export LD; \ - LDFLAGS="$(LDFLAGS_FOR_TARGET)"; export LDFLAGS; \ - NM="$(NM_FOR_TARGET)"; export NM; \ - RANLIB="$(RANLIB_FOR_TARGET)"; export RANLIB; \ - WINDRES="$(WINDRES_FOR_TARGET)"; export WINDRES; \ - echo Configuring in $(TARGET_SUBDIR)/libjava; \ - cd "$(TARGET_SUBDIR)/libjava" || exit 1; \ - case $(srcdir) in \ - /* | [A-Za-z]:[\\/]*) \ - topdir=$(srcdir) ;; \ - *) \ - case "$(TARGET_SUBDIR)" in \ - .) topdir="../$(srcdir)" ;; \ - *) topdir="../../$(srcdir)" ;; \ - esac ;; \ - esac; \ - srcdiroption="--srcdir=$${topdir}/libjava"; \ - libsrcdir="$$s/libjava"; \ - rm -f no-such-file || : ; \ - CONFIG_SITE=no-such-file $(SHELL) $${libsrcdir}/configure \ - $(TARGET_CONFIGARGS) $${srcdiroption} \ - --with-target-subdir="$(TARGET_SUBDIR)" \ + echo "Doing clean in $(TARGET_SUBDIR)/boehm-gc" ; \ + for flag in $(EXTRA_TARGET_FLAGS); do \ + eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \ + done; \ + (cd $(TARGET_SUBDIR)/boehm-gc && \ + $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \ + "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \ + "RANLIB=$${RANLIB}" \ + "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" \ + clean) \ || exit 1 -.PHONY: all-target-libjava maybe-all-target-libjava -maybe-all-target-libjava: -all-target-libjava: configure-target-libjava - @r=`${PWD_COMMAND}`; export r; \ - s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ - $(SET_LIB_PATH) \ - (cd $(TARGET_SUBDIR)/libjava && \ - $(MAKE) $(TARGET_FLAGS_TO_PASS) 'CXX=$$(RAW_CXX_FOR_TARGET)' 'CXX_FOR_TARGET=$$(RAW_CXX_FOR_TARGET)' all) -.PHONY: check-target-libjava maybe-check-target-libjava -maybe-check-target-libjava: +.PHONY: maybe-distclean-target-boehm-gc distclean-target-boehm-gc +maybe-distclean-target-boehm-gc: -check-target-libjava: - @r=`${PWD_COMMAND}`; export r; \ +distclean-target-boehm-gc: + @[ -f $(TARGET_SUBDIR)/boehm-gc/Makefile ] || exit 0 ; \ + r=`${PWD_COMMAND}`; export r; \ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ $(SET_LIB_PATH) \ - (cd $(TARGET_SUBDIR)/libjava && \ - $(MAKE) $(TARGET_FLAGS_TO_PASS) 'CXX=$$(RAW_CXX_FOR_TARGET)' 'CXX_FOR_TARGET=$$(RAW_CXX_FOR_TARGET)' check) + echo "Doing distclean in $(TARGET_SUBDIR)/boehm-gc" ; \ + for flag in $(EXTRA_TARGET_FLAGS); do \ + eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \ + done; \ + (cd $(TARGET_SUBDIR)/boehm-gc && \ + $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \ + "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \ + "RANLIB=$${RANLIB}" \ + "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" \ + distclean) \ + || exit 1 -.PHONY: install-target-libjava maybe-install-target-libjava -maybe-install-target-libjava: +.PHONY: maybe-maintainer-clean-target-boehm-gc maintainer-clean-target-boehm-gc +maybe-maintainer-clean-target-boehm-gc: -install-target-libjava: installdirs - @r=`${PWD_COMMAND}`; export r; \ +maintainer-clean-target-boehm-gc: + @[ -f $(TARGET_SUBDIR)/boehm-gc/Makefile ] || exit 0 ; \ + r=`${PWD_COMMAND}`; export r; \ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ $(SET_LIB_PATH) \ - (cd $(TARGET_SUBDIR)/libjava && \ - $(MAKE) $(TARGET_FLAGS_TO_PASS) install) + echo "Doing maintainer-clean in $(TARGET_SUBDIR)/boehm-gc" ; \ + for flag in $(EXTRA_TARGET_FLAGS); do \ + eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \ + done; \ + (cd $(TARGET_SUBDIR)/boehm-gc && \ + $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \ + "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \ + "RANLIB=$${RANLIB}" \ + "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" \ + maintainer-clean) \ + || exit 1 -.PHONY: configure-target-zlib maybe-configure-target-zlib -maybe-configure-target-zlib: + +.PHONY: configure-target-qthreads maybe-configure-target-qthreads +maybe-configure-target-qthreads: # There's only one multilib.out. Cleverer subdirs shouldn't need it copied. -$(TARGET_SUBDIR)/zlib/multilib.out: multilib.out - $(SHELL) $(srcdir)/mkinstalldirs $(TARGET_SUBDIR)/zlib ; \ - rm -f $(TARGET_SUBDIR)/zlib/Makefile || : ; \ - cp multilib.out $(TARGET_SUBDIR)/zlib/multilib.out +$(TARGET_SUBDIR)/qthreads/multilib.out: multilib.out + $(SHELL) $(srcdir)/mkinstalldirs $(TARGET_SUBDIR)/qthreads ; \ + rm -f $(TARGET_SUBDIR)/qthreads/Makefile || : ; \ + cp multilib.out $(TARGET_SUBDIR)/qthreads/multilib.out -configure-target-zlib: $(TARGET_SUBDIR)/zlib/multilib.out - @test ! -f $(TARGET_SUBDIR)/zlib/Makefile || exit 0; \ - $(SHELL) $(srcdir)/mkinstalldirs $(TARGET_SUBDIR)/zlib ; \ +configure-target-qthreads: $(TARGET_SUBDIR)/qthreads/multilib.out + @test ! -f $(TARGET_SUBDIR)/qthreads/Makefile || exit 0; \ + $(SHELL) $(srcdir)/mkinstalldirs $(TARGET_SUBDIR)/qthreads ; \ r=`${PWD_COMMAND}`; export r; \ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ $(SET_LIB_PATH) \ @@ -23149,8 +22740,8 @@ configure-target-zlib: $(TARGET_SUBDIR)/zlib/multilib.out NM="$(NM_FOR_TARGET)"; export NM; \ RANLIB="$(RANLIB_FOR_TARGET)"; export RANLIB; \ WINDRES="$(WINDRES_FOR_TARGET)"; export WINDRES; \ - echo Configuring in $(TARGET_SUBDIR)/zlib; \ - cd "$(TARGET_SUBDIR)/zlib" || exit 1; \ + echo Configuring in $(TARGET_SUBDIR)/qthreads; \ + cd "$(TARGET_SUBDIR)/qthreads" || exit 1; \ case $(srcdir) in \ /* | [A-Za-z]:[\\/]*) \ topdir=$(srcdir) ;; \ @@ -23160,225 +22751,241 @@ configure-target-zlib: $(TARGET_SUBDIR)/zlib/multilib.out *) topdir="../../$(srcdir)" ;; \ esac ;; \ esac; \ - if [ "$(srcdir)" = "." ] ; then \ - if [ "$(TARGET_SUBDIR)" != "." ] ; then \ - if $(SHELL) $$s/symlink-tree $${topdir}/zlib "no-such-file" ; then \ - if [ -f Makefile ]; then \ - if $(MAKE) distclean; then \ - true; \ - else \ - exit 1; \ - fi; \ - else \ - true; \ - fi; \ - else \ - exit 1; \ - fi; \ - else \ - true; \ - fi; \ - srcdiroption="--srcdir=."; \ - libsrcdir="."; \ - else \ - srcdiroption="--srcdir=$${topdir}/zlib"; \ - libsrcdir="$$s/zlib"; \ - fi; \ + srcdiroption="--srcdir=$${topdir}/qthreads"; \ + libsrcdir="$$s/qthreads"; \ rm -f no-such-file || : ; \ CONFIG_SITE=no-such-file $(SHELL) $${libsrcdir}/configure \ $(TARGET_CONFIGARGS) $${srcdiroption} \ --with-target-subdir="$(TARGET_SUBDIR)" \ || exit 1 -.PHONY: all-target-zlib maybe-all-target-zlib -maybe-all-target-zlib: -all-target-zlib: configure-target-zlib +.PHONY: all-target-qthreads maybe-all-target-qthreads +maybe-all-target-qthreads: +all-target-qthreads: configure-target-qthreads @r=`${PWD_COMMAND}`; export r; \ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ $(SET_LIB_PATH) \ - (cd $(TARGET_SUBDIR)/zlib && \ + (cd $(TARGET_SUBDIR)/qthreads && \ $(MAKE) $(TARGET_FLAGS_TO_PASS) all) -.PHONY: check-target-zlib maybe-check-target-zlib -maybe-check-target-zlib: +.PHONY: check-target-qthreads maybe-check-target-qthreads +maybe-check-target-qthreads: -check-target-zlib: +check-target-qthreads: @r=`${PWD_COMMAND}`; export r; \ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ $(SET_LIB_PATH) \ - (cd $(TARGET_SUBDIR)/zlib && \ + (cd $(TARGET_SUBDIR)/qthreads && \ $(MAKE) $(TARGET_FLAGS_TO_PASS) check) -.PHONY: install-target-zlib maybe-install-target-zlib -maybe-install-target-zlib: +.PHONY: install-target-qthreads maybe-install-target-qthreads +maybe-install-target-qthreads: -install-target-zlib: installdirs +install-target-qthreads: installdirs @r=`${PWD_COMMAND}`; export r; \ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ $(SET_LIB_PATH) \ - (cd $(TARGET_SUBDIR)/zlib && \ + (cd $(TARGET_SUBDIR)/qthreads && \ $(MAKE) $(TARGET_FLAGS_TO_PASS) install) -.PHONY: configure-target-boehm-gc maybe-configure-target-boehm-gc -maybe-configure-target-boehm-gc: +# Other targets (info, dvi, etc.) -# There's only one multilib.out. Cleverer subdirs shouldn't need it copied. -$(TARGET_SUBDIR)/boehm-gc/multilib.out: multilib.out - $(SHELL) $(srcdir)/mkinstalldirs $(TARGET_SUBDIR)/boehm-gc ; \ - rm -f $(TARGET_SUBDIR)/boehm-gc/Makefile || : ; \ - cp multilib.out $(TARGET_SUBDIR)/boehm-gc/multilib.out +.PHONY: maybe-info-target-qthreads info-target-qthreads +maybe-info-target-qthreads: -configure-target-boehm-gc: $(TARGET_SUBDIR)/boehm-gc/multilib.out - @test ! -f $(TARGET_SUBDIR)/boehm-gc/Makefile || exit 0; \ - $(SHELL) $(srcdir)/mkinstalldirs $(TARGET_SUBDIR)/boehm-gc ; \ +info-target-qthreads: \ + configure-target-qthreads + @[ -f $(TARGET_SUBDIR)/qthreads/Makefile ] || exit 0 ; \ r=`${PWD_COMMAND}`; export r; \ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ $(SET_LIB_PATH) \ - AR="$(AR_FOR_TARGET)"; export AR; \ - AS="$(AS_FOR_TARGET)"; export AS; \ - CC="$(CC_FOR_TARGET)"; export CC; \ - CFLAGS="$(CFLAGS_FOR_TARGET)"; export CFLAGS; \ - CONFIG_SHELL="$(SHELL)"; export CONFIG_SHELL; \ - CPPFLAGS="$(CFLAGS_FOR_TARGET)"; export CPPFLAGS; \ - CXX="$(CXX_FOR_TARGET)"; export CXX; \ - CXXFLAGS="$(CXXFLAGS_FOR_TARGET)"; export CXXFLAGS; \ - GCJ="$(GCJ_FOR_TARGET)"; export GCJ; \ - DLLTOOL="$(DLLTOOL_FOR_TARGET)"; export DLLTOOL; \ - LD="$(LD_FOR_TARGET)"; export LD; \ - LDFLAGS="$(LDFLAGS_FOR_TARGET)"; export LDFLAGS; \ - NM="$(NM_FOR_TARGET)"; export NM; \ - RANLIB="$(RANLIB_FOR_TARGET)"; export RANLIB; \ - WINDRES="$(WINDRES_FOR_TARGET)"; export WINDRES; \ - echo Configuring in $(TARGET_SUBDIR)/boehm-gc; \ - cd "$(TARGET_SUBDIR)/boehm-gc" || exit 1; \ - case $(srcdir) in \ - /* | [A-Za-z]:[\\/]*) \ - topdir=$(srcdir) ;; \ - *) \ - case "$(TARGET_SUBDIR)" in \ - .) topdir="../$(srcdir)" ;; \ - *) topdir="../../$(srcdir)" ;; \ - esac ;; \ - esac; \ - srcdiroption="--srcdir=$${topdir}/boehm-gc"; \ - libsrcdir="$$s/boehm-gc"; \ - rm -f no-such-file || : ; \ - CONFIG_SITE=no-such-file $(SHELL) $${libsrcdir}/configure \ - $(TARGET_CONFIGARGS) $${srcdiroption} \ - --with-target-subdir="$(TARGET_SUBDIR)" \ + echo "Doing info in $(TARGET_SUBDIR)/qthreads" ; \ + for flag in $(EXTRA_TARGET_FLAGS); do \ + eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \ + done; \ + (cd $(TARGET_SUBDIR)/qthreads && \ + $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \ + "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \ + "RANLIB=$${RANLIB}" \ + "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" \ + info) \ || exit 1 -.PHONY: all-target-boehm-gc maybe-all-target-boehm-gc -maybe-all-target-boehm-gc: -all-target-boehm-gc: configure-target-boehm-gc - @r=`${PWD_COMMAND}`; export r; \ + +.PHONY: maybe-dvi-target-qthreads dvi-target-qthreads +maybe-dvi-target-qthreads: + +dvi-target-qthreads: \ + configure-target-qthreads + @[ -f $(TARGET_SUBDIR)/qthreads/Makefile ] || exit 0 ; \ + r=`${PWD_COMMAND}`; export r; \ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ $(SET_LIB_PATH) \ - (cd $(TARGET_SUBDIR)/boehm-gc && \ - $(MAKE) $(TARGET_FLAGS_TO_PASS) all) + echo "Doing dvi in $(TARGET_SUBDIR)/qthreads" ; \ + for flag in $(EXTRA_TARGET_FLAGS); do \ + eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \ + done; \ + (cd $(TARGET_SUBDIR)/qthreads && \ + $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \ + "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \ + "RANLIB=$${RANLIB}" \ + "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" \ + dvi) \ + || exit 1 -.PHONY: check-target-boehm-gc maybe-check-target-boehm-gc -maybe-check-target-boehm-gc: -check-target-boehm-gc: - @r=`${PWD_COMMAND}`; export r; \ +.PHONY: maybe-TAGS-target-qthreads TAGS-target-qthreads +maybe-TAGS-target-qthreads: + +TAGS-target-qthreads: \ + configure-target-qthreads + @[ -f $(TARGET_SUBDIR)/qthreads/Makefile ] || exit 0 ; \ + r=`${PWD_COMMAND}`; export r; \ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ $(SET_LIB_PATH) \ - (cd $(TARGET_SUBDIR)/boehm-gc && \ - $(MAKE) $(TARGET_FLAGS_TO_PASS) check) + echo "Doing TAGS in $(TARGET_SUBDIR)/qthreads" ; \ + for flag in $(EXTRA_TARGET_FLAGS); do \ + eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \ + done; \ + (cd $(TARGET_SUBDIR)/qthreads && \ + $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \ + "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \ + "RANLIB=$${RANLIB}" \ + "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" \ + TAGS) \ + || exit 1 -.PHONY: install-target-boehm-gc maybe-install-target-boehm-gc -maybe-install-target-boehm-gc: +.PHONY: maybe-install-info-target-qthreads install-info-target-qthreads +maybe-install-info-target-qthreads: -install-target-boehm-gc: installdirs - @r=`${PWD_COMMAND}`; export r; \ +install-info-target-qthreads: \ + configure-target-qthreads \ + info-target-qthreads + @[ -f $(TARGET_SUBDIR)/qthreads/Makefile ] || exit 0 ; \ + r=`${PWD_COMMAND}`; export r; \ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ $(SET_LIB_PATH) \ - (cd $(TARGET_SUBDIR)/boehm-gc && \ - $(MAKE) $(TARGET_FLAGS_TO_PASS) install) + echo "Doing install-info in $(TARGET_SUBDIR)/qthreads" ; \ + for flag in $(EXTRA_TARGET_FLAGS); do \ + eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \ + done; \ + (cd $(TARGET_SUBDIR)/qthreads && \ + $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \ + "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \ + "RANLIB=$${RANLIB}" \ + "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" \ + install-info) \ + || exit 1 -.PHONY: configure-target-qthreads maybe-configure-target-qthreads -maybe-configure-target-qthreads: +.PHONY: maybe-installcheck-target-qthreads installcheck-target-qthreads +maybe-installcheck-target-qthreads: -# There's only one multilib.out. Cleverer subdirs shouldn't need it copied. -$(TARGET_SUBDIR)/qthreads/multilib.out: multilib.out - $(SHELL) $(srcdir)/mkinstalldirs $(TARGET_SUBDIR)/qthreads ; \ - rm -f $(TARGET_SUBDIR)/qthreads/Makefile || : ; \ - cp multilib.out $(TARGET_SUBDIR)/qthreads/multilib.out +installcheck-target-qthreads: \ + configure-target-qthreads + @[ -f $(TARGET_SUBDIR)/qthreads/Makefile ] || exit 0 ; \ + r=`${PWD_COMMAND}`; export r; \ + s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ + $(SET_LIB_PATH) \ + echo "Doing installcheck in $(TARGET_SUBDIR)/qthreads" ; \ + for flag in $(EXTRA_TARGET_FLAGS); do \ + eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \ + done; \ + (cd $(TARGET_SUBDIR)/qthreads && \ + $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \ + "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \ + "RANLIB=$${RANLIB}" \ + "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" \ + installcheck) \ + || exit 1 -configure-target-qthreads: $(TARGET_SUBDIR)/qthreads/multilib.out - @test ! -f $(TARGET_SUBDIR)/qthreads/Makefile || exit 0; \ - $(SHELL) $(srcdir)/mkinstalldirs $(TARGET_SUBDIR)/qthreads ; \ + +.PHONY: maybe-mostlyclean-target-qthreads mostlyclean-target-qthreads +maybe-mostlyclean-target-qthreads: + +mostlyclean-target-qthreads: + @[ -f $(TARGET_SUBDIR)/qthreads/Makefile ] || exit 0 ; \ r=`${PWD_COMMAND}`; export r; \ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ $(SET_LIB_PATH) \ - AR="$(AR_FOR_TARGET)"; export AR; \ - AS="$(AS_FOR_TARGET)"; export AS; \ - CC="$(CC_FOR_TARGET)"; export CC; \ - CFLAGS="$(CFLAGS_FOR_TARGET)"; export CFLAGS; \ - CONFIG_SHELL="$(SHELL)"; export CONFIG_SHELL; \ - CPPFLAGS="$(CFLAGS_FOR_TARGET)"; export CPPFLAGS; \ - CXX="$(CXX_FOR_TARGET)"; export CXX; \ - CXXFLAGS="$(CXXFLAGS_FOR_TARGET)"; export CXXFLAGS; \ - GCJ="$(GCJ_FOR_TARGET)"; export GCJ; \ - DLLTOOL="$(DLLTOOL_FOR_TARGET)"; export DLLTOOL; \ - LD="$(LD_FOR_TARGET)"; export LD; \ - LDFLAGS="$(LDFLAGS_FOR_TARGET)"; export LDFLAGS; \ - NM="$(NM_FOR_TARGET)"; export NM; \ - RANLIB="$(RANLIB_FOR_TARGET)"; export RANLIB; \ - WINDRES="$(WINDRES_FOR_TARGET)"; export WINDRES; \ - echo Configuring in $(TARGET_SUBDIR)/qthreads; \ - cd "$(TARGET_SUBDIR)/qthreads" || exit 1; \ - case $(srcdir) in \ - /* | [A-Za-z]:[\\/]*) \ - topdir=$(srcdir) ;; \ - *) \ - case "$(TARGET_SUBDIR)" in \ - .) topdir="../$(srcdir)" ;; \ - *) topdir="../../$(srcdir)" ;; \ - esac ;; \ - esac; \ - srcdiroption="--srcdir=$${topdir}/qthreads"; \ - libsrcdir="$$s/qthreads"; \ - rm -f no-such-file || : ; \ - CONFIG_SITE=no-such-file $(SHELL) $${libsrcdir}/configure \ - $(TARGET_CONFIGARGS) $${srcdiroption} \ - --with-target-subdir="$(TARGET_SUBDIR)" \ + echo "Doing mostlyclean in $(TARGET_SUBDIR)/qthreads" ; \ + for flag in $(EXTRA_TARGET_FLAGS); do \ + eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \ + done; \ + (cd $(TARGET_SUBDIR)/qthreads && \ + $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \ + "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \ + "RANLIB=$${RANLIB}" \ + "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" \ + mostlyclean) \ || exit 1 -.PHONY: all-target-qthreads maybe-all-target-qthreads -maybe-all-target-qthreads: -all-target-qthreads: configure-target-qthreads - @r=`${PWD_COMMAND}`; export r; \ + +.PHONY: maybe-clean-target-qthreads clean-target-qthreads +maybe-clean-target-qthreads: + +clean-target-qthreads: + @[ -f $(TARGET_SUBDIR)/qthreads/Makefile ] || exit 0 ; \ + r=`${PWD_COMMAND}`; export r; \ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ $(SET_LIB_PATH) \ + echo "Doing clean in $(TARGET_SUBDIR)/qthreads" ; \ + for flag in $(EXTRA_TARGET_FLAGS); do \ + eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \ + done; \ (cd $(TARGET_SUBDIR)/qthreads && \ - $(MAKE) $(TARGET_FLAGS_TO_PASS) all) + $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \ + "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \ + "RANLIB=$${RANLIB}" \ + "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" \ + clean) \ + || exit 1 -.PHONY: check-target-qthreads maybe-check-target-qthreads -maybe-check-target-qthreads: -check-target-qthreads: - @r=`${PWD_COMMAND}`; export r; \ +.PHONY: maybe-distclean-target-qthreads distclean-target-qthreads +maybe-distclean-target-qthreads: + +distclean-target-qthreads: + @[ -f $(TARGET_SUBDIR)/qthreads/Makefile ] || exit 0 ; \ + r=`${PWD_COMMAND}`; export r; \ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ $(SET_LIB_PATH) \ + echo "Doing distclean in $(TARGET_SUBDIR)/qthreads" ; \ + for flag in $(EXTRA_TARGET_FLAGS); do \ + eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \ + done; \ (cd $(TARGET_SUBDIR)/qthreads && \ - $(MAKE) $(TARGET_FLAGS_TO_PASS) check) + $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \ + "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \ + "RANLIB=$${RANLIB}" \ + "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" \ + distclean) \ + || exit 1 -.PHONY: install-target-qthreads maybe-install-target-qthreads -maybe-install-target-qthreads: +.PHONY: maybe-maintainer-clean-target-qthreads maintainer-clean-target-qthreads +maybe-maintainer-clean-target-qthreads: -install-target-qthreads: installdirs - @r=`${PWD_COMMAND}`; export r; \ +maintainer-clean-target-qthreads: + @[ -f $(TARGET_SUBDIR)/qthreads/Makefile ] || exit 0 ; \ + r=`${PWD_COMMAND}`; export r; \ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ $(SET_LIB_PATH) \ + echo "Doing maintainer-clean in $(TARGET_SUBDIR)/qthreads" ; \ + for flag in $(EXTRA_TARGET_FLAGS); do \ + eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \ + done; \ (cd $(TARGET_SUBDIR)/qthreads && \ - $(MAKE) $(TARGET_FLAGS_TO_PASS) install) + $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \ + "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \ + "RANLIB=$${RANLIB}" \ + "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" \ + maintainer-clean) \ + || exit 1 + .PHONY: configure-target-rda maybe-configure-target-rda @@ -23461,6 +23068,204 @@ install-target-rda: installdirs $(MAKE) $(TARGET_FLAGS_TO_PASS) install) +# Other targets (info, dvi, etc.) + +.PHONY: maybe-info-target-rda info-target-rda +maybe-info-target-rda: + +info-target-rda: \ + configure-target-rda + @[ -f $(TARGET_SUBDIR)/rda/Makefile ] || exit 0 ; \ + r=`${PWD_COMMAND}`; export r; \ + s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ + $(SET_LIB_PATH) \ + echo "Doing info in $(TARGET_SUBDIR)/rda" ; \ + for flag in $(EXTRA_TARGET_FLAGS); do \ + eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \ + done; \ + (cd $(TARGET_SUBDIR)/rda && \ + $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \ + "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \ + "RANLIB=$${RANLIB}" \ + "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" \ + info) \ + || exit 1 + + +.PHONY: maybe-dvi-target-rda dvi-target-rda +maybe-dvi-target-rda: + +dvi-target-rda: \ + configure-target-rda + @[ -f $(TARGET_SUBDIR)/rda/Makefile ] || exit 0 ; \ + r=`${PWD_COMMAND}`; export r; \ + s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ + $(SET_LIB_PATH) \ + echo "Doing dvi in $(TARGET_SUBDIR)/rda" ; \ + for flag in $(EXTRA_TARGET_FLAGS); do \ + eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \ + done; \ + (cd $(TARGET_SUBDIR)/rda && \ + $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \ + "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \ + "RANLIB=$${RANLIB}" \ + "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" \ + dvi) \ + || exit 1 + + +.PHONY: maybe-TAGS-target-rda TAGS-target-rda +maybe-TAGS-target-rda: + +TAGS-target-rda: \ + configure-target-rda + @[ -f $(TARGET_SUBDIR)/rda/Makefile ] || exit 0 ; \ + r=`${PWD_COMMAND}`; export r; \ + s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ + $(SET_LIB_PATH) \ + echo "Doing TAGS in $(TARGET_SUBDIR)/rda" ; \ + for flag in $(EXTRA_TARGET_FLAGS); do \ + eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \ + done; \ + (cd $(TARGET_SUBDIR)/rda && \ + $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \ + "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \ + "RANLIB=$${RANLIB}" \ + "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" \ + TAGS) \ + || exit 1 + + +.PHONY: maybe-install-info-target-rda install-info-target-rda +maybe-install-info-target-rda: + +install-info-target-rda: \ + configure-target-rda \ + info-target-rda + @[ -f $(TARGET_SUBDIR)/rda/Makefile ] || exit 0 ; \ + r=`${PWD_COMMAND}`; export r; \ + s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ + $(SET_LIB_PATH) \ + echo "Doing install-info in $(TARGET_SUBDIR)/rda" ; \ + for flag in $(EXTRA_TARGET_FLAGS); do \ + eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \ + done; \ + (cd $(TARGET_SUBDIR)/rda && \ + $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \ + "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \ + "RANLIB=$${RANLIB}" \ + "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" \ + install-info) \ + || exit 1 + + +.PHONY: maybe-installcheck-target-rda installcheck-target-rda +maybe-installcheck-target-rda: + +installcheck-target-rda: \ + configure-target-rda + @[ -f $(TARGET_SUBDIR)/rda/Makefile ] || exit 0 ; \ + r=`${PWD_COMMAND}`; export r; \ + s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ + $(SET_LIB_PATH) \ + echo "Doing installcheck in $(TARGET_SUBDIR)/rda" ; \ + for flag in $(EXTRA_TARGET_FLAGS); do \ + eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \ + done; \ + (cd $(TARGET_SUBDIR)/rda && \ + $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \ + "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \ + "RANLIB=$${RANLIB}" \ + "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" \ + installcheck) \ + || exit 1 + + +.PHONY: maybe-mostlyclean-target-rda mostlyclean-target-rda +maybe-mostlyclean-target-rda: + +mostlyclean-target-rda: + @[ -f $(TARGET_SUBDIR)/rda/Makefile ] || exit 0 ; \ + r=`${PWD_COMMAND}`; export r; \ + s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ + $(SET_LIB_PATH) \ + echo "Doing mostlyclean in $(TARGET_SUBDIR)/rda" ; \ + for flag in $(EXTRA_TARGET_FLAGS); do \ + eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \ + done; \ + (cd $(TARGET_SUBDIR)/rda && \ + $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \ + "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \ + "RANLIB=$${RANLIB}" \ + "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" \ + mostlyclean) \ + || exit 1 + + +.PHONY: maybe-clean-target-rda clean-target-rda +maybe-clean-target-rda: + +clean-target-rda: + @[ -f $(TARGET_SUBDIR)/rda/Makefile ] || exit 0 ; \ + r=`${PWD_COMMAND}`; export r; \ + s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ + $(SET_LIB_PATH) \ + echo "Doing clean in $(TARGET_SUBDIR)/rda" ; \ + for flag in $(EXTRA_TARGET_FLAGS); do \ + eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \ + done; \ + (cd $(TARGET_SUBDIR)/rda && \ + $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \ + "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \ + "RANLIB=$${RANLIB}" \ + "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" \ + clean) \ + || exit 1 + + +.PHONY: maybe-distclean-target-rda distclean-target-rda +maybe-distclean-target-rda: + +distclean-target-rda: + @[ -f $(TARGET_SUBDIR)/rda/Makefile ] || exit 0 ; \ + r=`${PWD_COMMAND}`; export r; \ + s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ + $(SET_LIB_PATH) \ + echo "Doing distclean in $(TARGET_SUBDIR)/rda" ; \ + for flag in $(EXTRA_TARGET_FLAGS); do \ + eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \ + done; \ + (cd $(TARGET_SUBDIR)/rda && \ + $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \ + "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \ + "RANLIB=$${RANLIB}" \ + "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" \ + distclean) \ + || exit 1 + + +.PHONY: maybe-maintainer-clean-target-rda maintainer-clean-target-rda +maybe-maintainer-clean-target-rda: + +maintainer-clean-target-rda: + @[ -f $(TARGET_SUBDIR)/rda/Makefile ] || exit 0 ; \ + r=`${PWD_COMMAND}`; export r; \ + s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ + $(SET_LIB_PATH) \ + echo "Doing maintainer-clean in $(TARGET_SUBDIR)/rda" ; \ + for flag in $(EXTRA_TARGET_FLAGS); do \ + eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \ + done; \ + (cd $(TARGET_SUBDIR)/rda && \ + $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \ + "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \ + "RANLIB=$${RANLIB}" \ + "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" \ + maintainer-clean) \ + || exit 1 + + + .PHONY: configure-target-libada maybe-configure-target-libada maybe-configure-target-libada: @@ -23541,6 +23346,204 @@ install-target-libada: installdirs $(MAKE) $(TARGET_FLAGS_TO_PASS) install) +# Other targets (info, dvi, etc.) + +.PHONY: maybe-info-target-libada info-target-libada +maybe-info-target-libada: + +info-target-libada: \ + configure-target-libada + @[ -f $(TARGET_SUBDIR)/libada/Makefile ] || exit 0 ; \ + r=`${PWD_COMMAND}`; export r; \ + s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ + $(SET_LIB_PATH) \ + echo "Doing info in $(TARGET_SUBDIR)/libada" ; \ + for flag in $(EXTRA_TARGET_FLAGS); do \ + eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \ + done; \ + (cd $(TARGET_SUBDIR)/libada && \ + $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \ + "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \ + "RANLIB=$${RANLIB}" \ + "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" \ + info) \ + || exit 1 + + +.PHONY: maybe-dvi-target-libada dvi-target-libada +maybe-dvi-target-libada: + +dvi-target-libada: \ + configure-target-libada + @[ -f $(TARGET_SUBDIR)/libada/Makefile ] || exit 0 ; \ + r=`${PWD_COMMAND}`; export r; \ + s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ + $(SET_LIB_PATH) \ + echo "Doing dvi in $(TARGET_SUBDIR)/libada" ; \ + for flag in $(EXTRA_TARGET_FLAGS); do \ + eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \ + done; \ + (cd $(TARGET_SUBDIR)/libada && \ + $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \ + "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \ + "RANLIB=$${RANLIB}" \ + "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" \ + dvi) \ + || exit 1 + + +.PHONY: maybe-TAGS-target-libada TAGS-target-libada +maybe-TAGS-target-libada: + +TAGS-target-libada: \ + configure-target-libada + @[ -f $(TARGET_SUBDIR)/libada/Makefile ] || exit 0 ; \ + r=`${PWD_COMMAND}`; export r; \ + s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ + $(SET_LIB_PATH) \ + echo "Doing TAGS in $(TARGET_SUBDIR)/libada" ; \ + for flag in $(EXTRA_TARGET_FLAGS); do \ + eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \ + done; \ + (cd $(TARGET_SUBDIR)/libada && \ + $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \ + "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \ + "RANLIB=$${RANLIB}" \ + "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" \ + TAGS) \ + || exit 1 + + +.PHONY: maybe-install-info-target-libada install-info-target-libada +maybe-install-info-target-libada: + +install-info-target-libada: \ + configure-target-libada \ + info-target-libada + @[ -f $(TARGET_SUBDIR)/libada/Makefile ] || exit 0 ; \ + r=`${PWD_COMMAND}`; export r; \ + s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ + $(SET_LIB_PATH) \ + echo "Doing install-info in $(TARGET_SUBDIR)/libada" ; \ + for flag in $(EXTRA_TARGET_FLAGS); do \ + eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \ + done; \ + (cd $(TARGET_SUBDIR)/libada && \ + $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \ + "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \ + "RANLIB=$${RANLIB}" \ + "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" \ + install-info) \ + || exit 1 + + +.PHONY: maybe-installcheck-target-libada installcheck-target-libada +maybe-installcheck-target-libada: + +installcheck-target-libada: \ + configure-target-libada + @[ -f $(TARGET_SUBDIR)/libada/Makefile ] || exit 0 ; \ + r=`${PWD_COMMAND}`; export r; \ + s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ + $(SET_LIB_PATH) \ + echo "Doing installcheck in $(TARGET_SUBDIR)/libada" ; \ + for flag in $(EXTRA_TARGET_FLAGS); do \ + eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \ + done; \ + (cd $(TARGET_SUBDIR)/libada && \ + $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \ + "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \ + "RANLIB=$${RANLIB}" \ + "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" \ + installcheck) \ + || exit 1 + + +.PHONY: maybe-mostlyclean-target-libada mostlyclean-target-libada +maybe-mostlyclean-target-libada: + +mostlyclean-target-libada: + @[ -f $(TARGET_SUBDIR)/libada/Makefile ] || exit 0 ; \ + r=`${PWD_COMMAND}`; export r; \ + s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ + $(SET_LIB_PATH) \ + echo "Doing mostlyclean in $(TARGET_SUBDIR)/libada" ; \ + for flag in $(EXTRA_TARGET_FLAGS); do \ + eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \ + done; \ + (cd $(TARGET_SUBDIR)/libada && \ + $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \ + "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \ + "RANLIB=$${RANLIB}" \ + "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" \ + mostlyclean) \ + || exit 1 + + +.PHONY: maybe-clean-target-libada clean-target-libada +maybe-clean-target-libada: + +clean-target-libada: + @[ -f $(TARGET_SUBDIR)/libada/Makefile ] || exit 0 ; \ + r=`${PWD_COMMAND}`; export r; \ + s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ + $(SET_LIB_PATH) \ + echo "Doing clean in $(TARGET_SUBDIR)/libada" ; \ + for flag in $(EXTRA_TARGET_FLAGS); do \ + eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \ + done; \ + (cd $(TARGET_SUBDIR)/libada && \ + $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \ + "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \ + "RANLIB=$${RANLIB}" \ + "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" \ + clean) \ + || exit 1 + + +.PHONY: maybe-distclean-target-libada distclean-target-libada +maybe-distclean-target-libada: + +distclean-target-libada: + @[ -f $(TARGET_SUBDIR)/libada/Makefile ] || exit 0 ; \ + r=`${PWD_COMMAND}`; export r; \ + s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ + $(SET_LIB_PATH) \ + echo "Doing distclean in $(TARGET_SUBDIR)/libada" ; \ + for flag in $(EXTRA_TARGET_FLAGS); do \ + eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \ + done; \ + (cd $(TARGET_SUBDIR)/libada && \ + $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \ + "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \ + "RANLIB=$${RANLIB}" \ + "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" \ + distclean) \ + || exit 1 + + +.PHONY: maybe-maintainer-clean-target-libada maintainer-clean-target-libada +maybe-maintainer-clean-target-libada: + +maintainer-clean-target-libada: + @[ -f $(TARGET_SUBDIR)/libada/Makefile ] || exit 0 ; \ + r=`${PWD_COMMAND}`; export r; \ + s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ + $(SET_LIB_PATH) \ + echo "Doing maintainer-clean in $(TARGET_SUBDIR)/libada" ; \ + for flag in $(EXTRA_TARGET_FLAGS); do \ + eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \ + done; \ + (cd $(TARGET_SUBDIR)/libada && \ + $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \ + "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \ + "RANLIB=$${RANLIB}" \ + "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" \ + maintainer-clean) \ + || exit 1 + + + # ---------- # GCC module @@ -23748,6 +23751,195 @@ gcc-no-fixedincludes: mv gcc/tmp-include gcc/include 2>/dev/null; \ else true; fi +# Other targets (dvi, info, etc.) + +.PHONY: maybe-info-gcc info-gcc +maybe-info-gcc: +info-gcc: \ + configure-gcc + @[ -f ./gcc/Makefile ] || exit 0; \ + r=`${PWD_COMMAND}`; export r; \ + s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ + $(SET_LIB_PATH) \ + for flag in $(EXTRA_GCC_FLAGS); do \ + eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \ + done; \ + echo "Doing info in gcc" ; \ + (cd gcc && \ + $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \ + "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \ + "RANLIB=$${RANLIB}" \ + "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" \ + info) \ + || exit 1 + + +.PHONY: maybe-dvi-gcc dvi-gcc +maybe-dvi-gcc: +dvi-gcc: \ + configure-gcc + @[ -f ./gcc/Makefile ] || exit 0; \ + r=`${PWD_COMMAND}`; export r; \ + s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ + $(SET_LIB_PATH) \ + for flag in $(EXTRA_GCC_FLAGS); do \ + eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \ + done; \ + echo "Doing dvi in gcc" ; \ + (cd gcc && \ + $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \ + "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \ + "RANLIB=$${RANLIB}" \ + "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" \ + dvi) \ + || exit 1 + + +.PHONY: maybe-TAGS-gcc TAGS-gcc +maybe-TAGS-gcc: +TAGS-gcc: \ + configure-gcc + @[ -f ./gcc/Makefile ] || exit 0; \ + r=`${PWD_COMMAND}`; export r; \ + s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ + $(SET_LIB_PATH) \ + for flag in $(EXTRA_GCC_FLAGS); do \ + eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \ + done; \ + echo "Doing TAGS in gcc" ; \ + (cd gcc && \ + $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \ + "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \ + "RANLIB=$${RANLIB}" \ + "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" \ + TAGS) \ + || exit 1 + + +.PHONY: maybe-install-info-gcc install-info-gcc +maybe-install-info-gcc: +install-info-gcc: \ + configure-gcc \ + info-gcc + @[ -f ./gcc/Makefile ] || exit 0; \ + r=`${PWD_COMMAND}`; export r; \ + s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ + $(SET_LIB_PATH) \ + for flag in $(EXTRA_GCC_FLAGS); do \ + eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \ + done; \ + echo "Doing install-info in gcc" ; \ + (cd gcc && \ + $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \ + "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \ + "RANLIB=$${RANLIB}" \ + "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" \ + install-info) \ + || exit 1 + + +.PHONY: maybe-installcheck-gcc installcheck-gcc +maybe-installcheck-gcc: +installcheck-gcc: \ + configure-gcc + @[ -f ./gcc/Makefile ] || exit 0; \ + r=`${PWD_COMMAND}`; export r; \ + s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ + $(SET_LIB_PATH) \ + for flag in $(EXTRA_GCC_FLAGS); do \ + eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \ + done; \ + echo "Doing installcheck in gcc" ; \ + (cd gcc && \ + $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \ + "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \ + "RANLIB=$${RANLIB}" \ + "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" \ + installcheck) \ + || exit 1 + + +.PHONY: maybe-mostlyclean-gcc mostlyclean-gcc +maybe-mostlyclean-gcc: +mostlyclean-gcc: + @[ -f ./gcc/Makefile ] || exit 0; \ + r=`${PWD_COMMAND}`; export r; \ + s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ + $(SET_LIB_PATH) \ + for flag in $(EXTRA_GCC_FLAGS); do \ + eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \ + done; \ + echo "Doing mostlyclean in gcc" ; \ + (cd gcc && \ + $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \ + "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \ + "RANLIB=$${RANLIB}" \ + "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" \ + mostlyclean) \ + || exit 1 + + +.PHONY: maybe-clean-gcc clean-gcc +maybe-clean-gcc: +clean-gcc: + @[ -f ./gcc/Makefile ] || exit 0; \ + r=`${PWD_COMMAND}`; export r; \ + s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ + $(SET_LIB_PATH) \ + for flag in $(EXTRA_GCC_FLAGS); do \ + eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \ + done; \ + echo "Doing clean in gcc" ; \ + (cd gcc && \ + $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \ + "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \ + "RANLIB=$${RANLIB}" \ + "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" \ + clean) \ + || exit 1 + + +.PHONY: maybe-distclean-gcc distclean-gcc +maybe-distclean-gcc: +distclean-gcc: + @[ -f ./gcc/Makefile ] || exit 0; \ + r=`${PWD_COMMAND}`; export r; \ + s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ + $(SET_LIB_PATH) \ + for flag in $(EXTRA_GCC_FLAGS); do \ + eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \ + done; \ + echo "Doing distclean in gcc" ; \ + (cd gcc && \ + $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \ + "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \ + "RANLIB=$${RANLIB}" \ + "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" \ + distclean) \ + || exit 1 + + +.PHONY: maybe-maintainer-clean-gcc maintainer-clean-gcc +maybe-maintainer-clean-gcc: +maintainer-clean-gcc: + @[ -f ./gcc/Makefile ] || exit 0; \ + r=`${PWD_COMMAND}`; export r; \ + s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ + $(SET_LIB_PATH) \ + for flag in $(EXTRA_GCC_FLAGS); do \ + eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \ + done; \ + echo "Doing maintainer-clean in gcc" ; \ + (cd gcc && \ + $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \ + "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \ + "RANLIB=$${RANLIB}" \ + "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" \ + maintainer-clean) \ + || exit 1 + + + # --------------------- # GCC bootstrap support # --------------------- @@ -23777,6 +23969,14 @@ STAMP = echo timestamp > STAGE1_CFLAGS=@stage1_cflags@ STAGE1_LANGUAGES=@stage1_languages@ +# For stage 1: +# * We force-disable intermodule optimizations, even if +# --enable-intermodule was passed, since the installed compiler probably +# can't handle them. Luckily, autoconf always respects +# the last argument when conflicting --enable arguments are passed. +# * Likewise, we force-disable coverage flags, since the installed compiler +# probably has never heard of them. +# * We build only C (and possibly Ada). configure-stage1-gcc: echo configure-stage1-gcc > stage_last ; \ if [ -f stage1-gcc/Makefile ] ; then \ @@ -23789,11 +23989,12 @@ configure-stage1-gcc: mv stage1-gcc gcc ; \ r=`${PWD_COMMAND}`; export r; \ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ + CONFIG_SHELL="$(SHELL)"; export CONFIG_SHELL; \ + TOPLEVEL_CONFIGURE_ARGUMENTS="$(TOPLEVEL_CONFIGURE_ARGUMENTS)"; export TOPLEVEL_CONFIGURE_ARGUMENTS; \ CC="$(CC)"; export CC; \ CFLAGS="$(CFLAGS)"; export CFLAGS; \ CXX="$(CXX)"; export CXX; \ CXXFLAGS="$(CXXFLAGS)"; export CXXFLAGS; \ - TOPLEVEL_CONFIGURE_ARGUMENTS="$(TOPLEVEL_CONFIGURE_ARGUMENTS)"; export TOPLEVEL_CONFIGURE_ARGUMENTS; \ AR="$(AR)"; export AR; \ AS="$(AS)"; export AS; \ CC_FOR_BUILD="$(CC_FOR_BUILD)"; export CC_FOR_BUILD; \ @@ -23818,25 +24019,33 @@ configure-stage1-gcc: libsrcdir="$$s/gcc";; \ esac; \ $(SHELL) $${libsrcdir}/configure \ - $(HOST_CONFIGARGS) $${srcdiroption} ; \ + $(HOST_CONFIGARGS) $${srcdiroption} \ + --disable-intermodule --disable-coverage \ + --enable-languages="$(STAGE1_LANGUAGES)"; \ cd .. ; \ mv gcc stage1-gcc ; \ $(STAMP) configure-stage1-gcc -all-stage1-gcc: configure-stage1-gcc all-bootstrap +# Real targets act phony if they depend on phony targets; this hack +# prevents gratuitous rebuilding of stage 1. +prebootstrap: + $(MAKE) all-bootstrap + $(STAMP) prebootstrap + +all-stage1-gcc: configure-stage1-gcc prebootstrap echo all-stage1-gcc > stage_last ; \ r=`${PWD_COMMAND}`; export r; \ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ mv stage1-gcc gcc ; \ cd gcc && \ $(MAKE) $(GCC_FLAGS_TO_PASS) \ - LANGUAGES="$(STAGE1_LANGUAGES)" \ CFLAGS="$(STAGE1_CFLAGS)" \ - COVERAGE_FLAGS= || exit 1 ; \ + || exit 1 ; \ cd .. ; \ mv gcc stage1-gcc ; \ $(STAMP) all-stage1-gcc +# TODO: Deal with STAGE_PREFIX (which is only for ada, incidentally) configure-stage2-gcc: all-stage1-gcc echo configure-stage2-gcc > stage_last ; \ if [ -f stage2-gcc/Makefile ] ; then \ @@ -23847,13 +24056,15 @@ configure-stage2-gcc: all-stage1-gcc fi ; \ [ -d stage2-gcc ] || mkdir stage2-gcc; \ mv stage2-gcc gcc ; \ + mv stage1-gcc prev-gcc ; \ r=`${PWD_COMMAND}`; export r; \ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ + CONFIG_SHELL="$(SHELL)"; export CONFIG_SHELL; \ + TOPLEVEL_CONFIGURE_ARGUMENTS="$(TOPLEVEL_CONFIGURE_ARGUMENTS)"; export TOPLEVEL_CONFIGURE_ARGUMENTS; \ CC="$(CC)"; export CC; \ CFLAGS="$(CFLAGS)"; export CFLAGS; \ CXX="$(CXX)"; export CXX; \ CXXFLAGS="$(CXXFLAGS)"; export CXXFLAGS; \ - TOPLEVEL_CONFIGURE_ARGUMENTS="$(TOPLEVEL_CONFIGURE_ARGUMENTS)"; export TOPLEVEL_CONFIGURE_ARGUMENTS; \ AR="$(AR)"; export AR; \ AS="$(AS)"; export AS; \ CC_FOR_BUILD="$(CC_FOR_BUILD)"; export CC_FOR_BUILD; \ @@ -23881,6 +24092,7 @@ configure-stage2-gcc: all-stage1-gcc $(HOST_CONFIGARGS) $${srcdiroption} ; \ cd .. ; \ mv gcc stage2-gcc ; \ + mv prev-gcc stage1-gcc ; \ $(STAMP) configure-stage2-gcc # Flags to pass to stage2 and later makes. @@ -23901,7 +24113,6 @@ all-stage2-gcc: all-stage1-gcc configure-stage2-gcc cd gcc && \ $(MAKE) $(GCC_FLAGS_TO_PASS) \ CC="$(STAGE_CC_WRAPPER) $$r/prev-gcc/xgcc$(exeext) -B$$r/prev-gcc/ -B$(build_tooldir)/bin/" \ - BUILD_CC="$(STAGE_CC_WRAPPER) $$r/prev-gcc/xgcc$(exeext) -B$$r/prev-gcc/ -B$(build_tooldir)/bin/" \ CC_FOR_BUILD="$(STAGE_CC_WRAPPER) $$r/prev-gcc/xgcc$(exeext) -B$$r/prev-gcc/ -B$(build_tooldir)/bin/" \ STAGE_PREFIX=$$r/prev-gcc/ \ $(POSTSTAGE1_FLAGS_TO_PASS) || exit 1 ; \ @@ -23920,13 +24131,15 @@ configure-stage3-gcc: all-stage2-gcc fi ; \ [ -d stage3-gcc ] || mkdir stage3-gcc; \ mv stage3-gcc gcc ; \ + mv stage1-gcc prev-gcc ; \ r=`${PWD_COMMAND}`; export r; \ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ + CONFIG_SHELL="$(SHELL)"; export CONFIG_SHELL; \ + TOPLEVEL_CONFIGURE_ARGUMENTS="$(TOPLEVEL_CONFIGURE_ARGUMENTS)"; export TOPLEVEL_CONFIGURE_ARGUMENTS; \ CC="$(CC)"; export CC; \ CFLAGS="$(CFLAGS)"; export CFLAGS; \ CXX="$(CXX)"; export CXX; \ CXXFLAGS="$(CXXFLAGS)"; export CXXFLAGS; \ - TOPLEVEL_CONFIGURE_ARGUMENTS="$(TOPLEVEL_CONFIGURE_ARGUMENTS)"; export TOPLEVEL_CONFIGURE_ARGUMENTS; \ AR="$(AR)"; export AR; \ AS="$(AS)"; export AS; \ CC_FOR_BUILD="$(CC_FOR_BUILD)"; export CC_FOR_BUILD; \ @@ -23954,13 +24167,9 @@ configure-stage3-gcc: all-stage2-gcc $(HOST_CONFIGARGS) $${srcdiroption} ; \ cd .. ; \ mv gcc stage3-gcc ; \ + mv prev-gcc stage2-gcc ; \ $(STAMP) configure-stage3-gcc -# Some files might not exist. This is disabled 'cause it don't work. -# cp prev-gcc/objc/objc-parse.c gcc/objc/objc-parse.c || true ; \ -# cp prev-gcc/java/parse.c gcc/java/parse.c || true ; \ -# cp prev-gcc/java/parse-scan.c gcc/java/parse-scan.c || true ; \ - all-stage3-gcc: all-stage2-gcc configure-stage3-gcc echo all-stage3-gcc > stage_last ; \ r=`${PWD_COMMAND}`; export r; \ @@ -23970,7 +24179,6 @@ all-stage3-gcc: all-stage2-gcc configure-stage3-gcc cd gcc && \ $(MAKE) $(GCC_FLAGS_TO_PASS) \ CC="$(STAGE_CC_WRAPPER) $$r/prev-gcc/xgcc$(exeext) -B$$r/prev-gcc/ -B$(build_tooldir)/bin/" \ - BUILD_CC="$(STAGE_CC_WRAPPER) $$r/prev-gcc/xgcc$(exeext) -B$$r/prev-gcc/ -B$(build_tooldir)/bin/" \ CC_FOR_BUILD="$(STAGE_CC_WRAPPER) $$r/prev-gcc/xgcc$(exeext) -B$$r/prev-gcc/ -B$(build_tooldir)/bin/" \ STAGE_PREFIX=$$r/prev-gcc/ \ $(POSTSTAGE1_FLAGS_TO_PASS) || exit 1 ; \ diff --git a/Makefile.tpl b/Makefile.tpl index 0dcad30..91fdae2 100644 --- a/Makefile.tpl +++ b/Makefile.tpl @@ -515,89 +515,6 @@ do-[+make_target+]: [+make_target+]-host [+make_target+]-target FOR target_modules +] \ maybe-[+make_target+]-target-[+module+][+ ENDFOR target_modules +] - -# GCC, the eternal special case -.PHONY: maybe-[+make_target+]-gcc [+make_target+]-gcc -maybe-[+make_target+]-gcc: -[+make_target+]-gcc: [+ - FOR depend +]\ - [+depend+]-gcc [+ - ENDFOR depend +] - @[ -f ./gcc/Makefile ] || exit 0; \ - r=`${PWD_COMMAND}`; export r; \ - s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ - $(SET_LIB_PATH) \ - for flag in $(EXTRA_GCC_FLAGS); do \ - eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \ - done; \ - echo "Doing [+make_target+] in gcc" ; \ - (cd gcc && \ - $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \ - "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \ - "RANLIB=$${RANLIB}" \ - "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" \ - [+make_target+]) \ - || exit 1 - -# Host modules. -[+ FOR host_modules +] -.PHONY: maybe-[+make_target+]-[+module+] [+make_target+]-[+module+] -maybe-[+make_target+]-[+module+]: -[+ IF (match-value? = "missing" (get "make_target") ) +] -# [+module+] doesn't support [+make_target+]. -[+make_target+]-[+module+]: -[+ ELSE +] -[+make_target+]-[+module+]: [+ - FOR depend +]\ - [+depend+]-[+module+] [+ - ENDFOR depend +] - @[ -f ./[+module+]/Makefile ] || exit 0; \ - r=`${PWD_COMMAND}`; export r; \ - s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ - $(SET_LIB_PATH) \ - for flag in $(EXTRA_HOST_FLAGS); do \ - eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \ - done; \ - echo "Doing [+make_target+] in [+module+]" ; \ - (cd [+module+] && \ - $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \ - "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \ - "RANLIB=$${RANLIB}" \ - "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" \ - [+make_target+]) \ - || exit 1 -[+ ENDIF +] -[+ ENDFOR host_modules +] - -# Target modules. -[+ FOR target_modules +] -.PHONY: maybe-[+make_target+]-target-[+module+] [+make_target+]-target-[+module+] -maybe-[+make_target+]-target-[+module+]: -[+ IF (match-value? = "missing" (get "make_target") ) +] -# [+module+] doesn't support [+make_target+]. -[+make_target+]-target-[+module+]: -[+ ELSE +] -[+make_target+]-target-[+module+]: [+ - FOR depend +]\ - [+depend+]-target-[+module+] [+ - ENDFOR depend +] - @[ -f $(TARGET_SUBDIR)/[+module+]/Makefile ] || exit 0 ; \ - r=`${PWD_COMMAND}`; export r; \ - s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ - $(SET_LIB_PATH) \ - echo "Doing [+make_target+] in $(TARGET_SUBDIR)/[+module+]" ; \ - for flag in $(EXTRA_TARGET_FLAGS); do \ - eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \ - done; \ - (cd $(TARGET_SUBDIR)/[+module+] && \ - $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \ - "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \ - "RANLIB=$${RANLIB}" \ - "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" \ - [+make_target+]) \ - || exit 1 -[+ ENDIF +] -[+ ENDFOR target_modules +] [+ ENDFOR recursive_targets +] # Here are the targets which correspond to the do-X targets. @@ -931,6 +848,36 @@ install-[+module+]: installdirs +] $(X11_FLAGS_TO_PASS)[+ ENDIF with_x +] install) [+ ENDIF no_install +] + +# Other targets (info, dvi, etc.) +[+ FOR recursive_targets +] +.PHONY: maybe-[+make_target+]-[+module+] [+make_target+]-[+module+] +maybe-[+make_target+]-[+module+]: +[+ IF (match-value? = "missing" (get "make_target") ) +] +# [+module+] doesn't support [+make_target+]. +[+make_target+]-[+module+]: +[+ ELSE +] +[+make_target+]-[+module+]: [+ + FOR depend +]\ + [+depend+]-[+module+] [+ + ENDFOR depend +] + @[ -f ./[+module+]/Makefile ] || exit 0; \ + r=`${PWD_COMMAND}`; export r; \ + s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ + $(SET_LIB_PATH) \ + for flag in $(EXTRA_HOST_FLAGS); do \ + eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \ + done; \ + echo "Doing [+make_target+] in [+module+]" ; \ + (cd [+module+] && \ + $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \ + "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \ + "RANLIB=$${RANLIB}" \ + "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" \ + [+make_target+]) \ + || exit 1 +[+ ENDIF +] +[+ ENDFOR recursive_targets +] [+ ENDFOR host_modules +] # --------------------------------------- @@ -1057,6 +1004,36 @@ install-target-[+module+]: installdirs (cd $(TARGET_SUBDIR)/[+module+] && \ $(MAKE) $(TARGET_FLAGS_TO_PASS) install) [+ ENDIF no_install +] + +# Other targets (info, dvi, etc.) +[+ FOR recursive_targets +] +.PHONY: maybe-[+make_target+]-target-[+module+] [+make_target+]-target-[+module+] +maybe-[+make_target+]-target-[+module+]: +[+ IF (match-value? = "missing" (get "make_target") ) +] +# [+module+] doesn't support [+make_target+]. +[+make_target+]-target-[+module+]: +[+ ELSE +] +[+make_target+]-target-[+module+]: [+ + FOR depend +]\ + [+depend+]-target-[+module+] [+ + ENDFOR depend +] + @[ -f $(TARGET_SUBDIR)/[+module+]/Makefile ] || exit 0 ; \ + r=`${PWD_COMMAND}`; export r; \ + s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ + $(SET_LIB_PATH) \ + echo "Doing [+make_target+] in $(TARGET_SUBDIR)/[+module+]" ; \ + for flag in $(EXTRA_TARGET_FLAGS); do \ + eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \ + done; \ + (cd $(TARGET_SUBDIR)/[+module+] && \ + $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \ + "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \ + "RANLIB=$${RANLIB}" \ + "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" \ + [+make_target+]) \ + || exit 1 +[+ ENDIF +] +[+ ENDFOR recursive_targets +] [+ ENDFOR target_modules +] # ---------- @@ -1265,6 +1242,32 @@ gcc-no-fixedincludes: mv gcc/tmp-include gcc/include 2>/dev/null; \ else true; fi +# Other targets (dvi, info, etc.) +[+ FOR recursive_targets +] +.PHONY: maybe-[+make_target+]-gcc [+make_target+]-gcc +maybe-[+make_target+]-gcc: +[+make_target+]-gcc: [+ + FOR depend +]\ + [+depend+]-gcc [+ + ENDFOR depend +] + @[ -f ./gcc/Makefile ] || exit 0; \ + r=`${PWD_COMMAND}`; export r; \ + s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ + $(SET_LIB_PATH) \ + for flag in $(EXTRA_GCC_FLAGS); do \ + eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \ + done; \ + echo "Doing [+make_target+] in gcc" ; \ + (cd gcc && \ + $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \ + "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \ + "RANLIB=$${RANLIB}" \ + "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" \ + [+make_target+]) \ + || exit 1 + +[+ ENDFOR recursive_targets +] + # --------------------- # GCC bootstrap support # --------------------- @@ -1294,6 +1297,14 @@ STAMP = echo timestamp > STAGE1_CFLAGS=@stage1_cflags@ STAGE1_LANGUAGES=@stage1_languages@ +# For stage 1: +# * We force-disable intermodule optimizations, even if +# --enable-intermodule was passed, since the installed compiler probably +# can't handle them. Luckily, autoconf always respects +# the last argument when conflicting --enable arguments are passed. +# * Likewise, we force-disable coverage flags, since the installed compiler +# probably has never heard of them. +# * We build only C (and possibly Ada). configure-stage1-gcc: echo configure-stage1-gcc > stage_last ; \ if [ -f stage1-gcc/Makefile ] ; then \ @@ -1306,11 +1317,12 @@ configure-stage1-gcc: mv stage1-gcc gcc ; \ r=`${PWD_COMMAND}`; export r; \ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ + CONFIG_SHELL="$(SHELL)"; export CONFIG_SHELL; \ + TOPLEVEL_CONFIGURE_ARGUMENTS="$(TOPLEVEL_CONFIGURE_ARGUMENTS)"; export TOPLEVEL_CONFIGURE_ARGUMENTS; \ CC="$(CC)"; export CC; \ CFLAGS="$(CFLAGS)"; export CFLAGS; \ CXX="$(CXX)"; export CXX; \ CXXFLAGS="$(CXXFLAGS)"; export CXXFLAGS; \ - TOPLEVEL_CONFIGURE_ARGUMENTS="$(TOPLEVEL_CONFIGURE_ARGUMENTS)"; export TOPLEVEL_CONFIGURE_ARGUMENTS; \ AR="$(AR)"; export AR; \ AS="$(AS)"; export AS; \ CC_FOR_BUILD="$(CC_FOR_BUILD)"; export CC_FOR_BUILD; \ @@ -1335,25 +1347,33 @@ configure-stage1-gcc: libsrcdir="$$s/gcc";; \ esac; \ $(SHELL) $${libsrcdir}/configure \ - $(HOST_CONFIGARGS) $${srcdiroption} ; \ + $(HOST_CONFIGARGS) $${srcdiroption} \ + --disable-intermodule --disable-coverage \ + --enable-languages="$(STAGE1_LANGUAGES)"; \ cd .. ; \ mv gcc stage1-gcc ; \ $(STAMP) configure-stage1-gcc -all-stage1-gcc: configure-stage1-gcc all-bootstrap +# Real targets act phony if they depend on phony targets; this hack +# prevents gratuitous rebuilding of stage 1. +prebootstrap: + $(MAKE) all-bootstrap + $(STAMP) prebootstrap + +all-stage1-gcc: configure-stage1-gcc prebootstrap echo all-stage1-gcc > stage_last ; \ r=`${PWD_COMMAND}`; export r; \ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ mv stage1-gcc gcc ; \ cd gcc && \ $(MAKE) $(GCC_FLAGS_TO_PASS) \ - LANGUAGES="$(STAGE1_LANGUAGES)" \ CFLAGS="$(STAGE1_CFLAGS)" \ - COVERAGE_FLAGS= || exit 1 ; \ + || exit 1 ; \ cd .. ; \ mv gcc stage1-gcc ; \ $(STAMP) all-stage1-gcc +# TODO: Deal with STAGE_PREFIX (which is only for ada, incidentally) configure-stage2-gcc: all-stage1-gcc echo configure-stage2-gcc > stage_last ; \ if [ -f stage2-gcc/Makefile ] ; then \ @@ -1364,13 +1384,15 @@ configure-stage2-gcc: all-stage1-gcc fi ; \ [ -d stage2-gcc ] || mkdir stage2-gcc; \ mv stage2-gcc gcc ; \ + mv stage1-gcc prev-gcc ; \ r=`${PWD_COMMAND}`; export r; \ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ + CONFIG_SHELL="$(SHELL)"; export CONFIG_SHELL; \ + TOPLEVEL_CONFIGURE_ARGUMENTS="$(TOPLEVEL_CONFIGURE_ARGUMENTS)"; export TOPLEVEL_CONFIGURE_ARGUMENTS; \ CC="$(CC)"; export CC; \ CFLAGS="$(CFLAGS)"; export CFLAGS; \ CXX="$(CXX)"; export CXX; \ CXXFLAGS="$(CXXFLAGS)"; export CXXFLAGS; \ - TOPLEVEL_CONFIGURE_ARGUMENTS="$(TOPLEVEL_CONFIGURE_ARGUMENTS)"; export TOPLEVEL_CONFIGURE_ARGUMENTS; \ AR="$(AR)"; export AR; \ AS="$(AS)"; export AS; \ CC_FOR_BUILD="$(CC_FOR_BUILD)"; export CC_FOR_BUILD; \ @@ -1398,6 +1420,7 @@ configure-stage2-gcc: all-stage1-gcc $(HOST_CONFIGARGS) $${srcdiroption} ; \ cd .. ; \ mv gcc stage2-gcc ; \ + mv prev-gcc stage1-gcc ; \ $(STAMP) configure-stage2-gcc # Flags to pass to stage2 and later makes. @@ -1418,7 +1441,6 @@ all-stage2-gcc: all-stage1-gcc configure-stage2-gcc cd gcc && \ $(MAKE) $(GCC_FLAGS_TO_PASS) \ CC="$(STAGE_CC_WRAPPER) $$r/prev-gcc/xgcc$(exeext) -B$$r/prev-gcc/ -B$(build_tooldir)/bin/" \ - BUILD_CC="$(STAGE_CC_WRAPPER) $$r/prev-gcc/xgcc$(exeext) -B$$r/prev-gcc/ -B$(build_tooldir)/bin/" \ CC_FOR_BUILD="$(STAGE_CC_WRAPPER) $$r/prev-gcc/xgcc$(exeext) -B$$r/prev-gcc/ -B$(build_tooldir)/bin/" \ STAGE_PREFIX=$$r/prev-gcc/ \ $(POSTSTAGE1_FLAGS_TO_PASS) || exit 1 ; \ @@ -1437,13 +1459,15 @@ configure-stage3-gcc: all-stage2-gcc fi ; \ [ -d stage3-gcc ] || mkdir stage3-gcc; \ mv stage3-gcc gcc ; \ + mv stage1-gcc prev-gcc ; \ r=`${PWD_COMMAND}`; export r; \ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ + CONFIG_SHELL="$(SHELL)"; export CONFIG_SHELL; \ + TOPLEVEL_CONFIGURE_ARGUMENTS="$(TOPLEVEL_CONFIGURE_ARGUMENTS)"; export TOPLEVEL_CONFIGURE_ARGUMENTS; \ CC="$(CC)"; export CC; \ CFLAGS="$(CFLAGS)"; export CFLAGS; \ CXX="$(CXX)"; export CXX; \ CXXFLAGS="$(CXXFLAGS)"; export CXXFLAGS; \ - TOPLEVEL_CONFIGURE_ARGUMENTS="$(TOPLEVEL_CONFIGURE_ARGUMENTS)"; export TOPLEVEL_CONFIGURE_ARGUMENTS; \ AR="$(AR)"; export AR; \ AS="$(AS)"; export AS; \ CC_FOR_BUILD="$(CC_FOR_BUILD)"; export CC_FOR_BUILD; \ @@ -1471,13 +1495,9 @@ configure-stage3-gcc: all-stage2-gcc $(HOST_CONFIGARGS) $${srcdiroption} ; \ cd .. ; \ mv gcc stage3-gcc ; \ + mv prev-gcc stage2-gcc ; \ $(STAMP) configure-stage3-gcc -# Some files might not exist. This is disabled 'cause it don't work. -# cp prev-gcc/objc/objc-parse.c gcc/objc/objc-parse.c || true ; \ -# cp prev-gcc/java/parse.c gcc/java/parse.c || true ; \ -# cp prev-gcc/java/parse-scan.c gcc/java/parse-scan.c || true ; \ - all-stage3-gcc: all-stage2-gcc configure-stage3-gcc echo all-stage3-gcc > stage_last ; \ r=`${PWD_COMMAND}`; export r; \ @@ -1487,7 +1507,6 @@ all-stage3-gcc: all-stage2-gcc configure-stage3-gcc cd gcc && \ $(MAKE) $(GCC_FLAGS_TO_PASS) \ CC="$(STAGE_CC_WRAPPER) $$r/prev-gcc/xgcc$(exeext) -B$$r/prev-gcc/ -B$(build_tooldir)/bin/" \ - BUILD_CC="$(STAGE_CC_WRAPPER) $$r/prev-gcc/xgcc$(exeext) -B$$r/prev-gcc/ -B$(build_tooldir)/bin/" \ CC_FOR_BUILD="$(STAGE_CC_WRAPPER) $$r/prev-gcc/xgcc$(exeext) -B$$r/prev-gcc/ -B$(build_tooldir)/bin/" \ STAGE_PREFIX=$$r/prev-gcc/ \ $(POSTSTAGE1_FLAGS_TO_PASS) || exit 1 ; \ @@ -2283,8 +2283,8 @@ if test -d ${srcdir}/gcc; then missing_languages=`echo "$missing_languages" | sed "s/,$language,/,/"` case ${boot_language} in yes) - # Add to (space-separated) list of stage 1 languages. - stage1_languages="${stage1_languages} ${language}" + # Add to (comma-separated) list of stage 1 languages. + stage1_languages="${stage1_languages},${language}" ;; esac ;; diff --git a/configure.in b/configure.in index d94a11d..0a9f05f 100644 --- a/configure.in +++ b/configure.in @@ -1180,8 +1180,8 @@ if test -d ${srcdir}/gcc; then missing_languages=`echo "$missing_languages" | sed "s/,$language,/,/"` case ${boot_language} in yes) - # Add to (space-separated) list of stage 1 languages. - stage1_languages="${stage1_languages} ${language}" + # Add to (comma-separated) list of stage 1 languages. + stage1_languages="${stage1_languages},${language}" ;; esac ;; |