diff options
| -rw-r--r-- | gdb/ChangeLog | 7 | ||||
| -rwxr-xr-x | gdb/configure | 4 | ||||
| -rw-r--r-- | gdb/configure.ac | 4 | ||||
| -rw-r--r-- | gdb/configure.tgt | 4 | ||||
| -rw-r--r-- | gdb/gdbserver/ChangeLog | 7 | ||||
| -rw-r--r-- | gdb/gdbserver/Makefile.in | 7 | ||||
| -rw-r--r-- | gdb/gdbserver/configure.srv | 3 | ||||
| -rw-r--r-- | gdb/gdbserver/spu-low.c | 585 | ||||
| -rw-r--r-- | gdb/regformats/reg-spu.dat | 132 |
9 files changed, 747 insertions, 6 deletions
diff --git a/gdb/ChangeLog b/gdb/ChangeLog index ff40a8b..d818a29 100644 --- a/gdb/ChangeLog +++ b/gdb/ChangeLog @@ -1,3 +1,10 @@ +2006-11-22 Ulrich Weigand <uweigand@de.ibm.com> + + * configure.tgt: Enable gdbserver for SPU target. + * configure.ac: Build gdbserver when gdb_native is yes. + * configure: Regenerate. + * regformats/reg-spu.dat: New file. + 2006-11-22 Daniel Jacobowitz <dan@codesourcery.com> * osabi.c (gdbarch_lookup_osabi): Do not return diff --git a/gdb/configure b/gdb/configure index 5aa226f..0d331c3 100755 --- a/gdb/configure +++ b/gdb/configure @@ -22646,8 +22646,8 @@ subdirs="$subdirs multi-ice" fi -# We only build gdbserver automatically if host and target are the same. -if test "x$target" = "x$host"; then +# We only build gdbserver automatically in a native configuration. +if test "$gdb_native" = "yes"; then echo "$as_me:$LINENO: checking whether gdbserver is supported on this host" >&5 echo $ECHO_N "checking whether gdbserver is supported on this host... $ECHO_C" >&6 if test "x$build_gdbserver" = xyes; then diff --git a/gdb/configure.ac b/gdb/configure.ac index b80f7bd..4deb4f5b 100644 --- a/gdb/configure.ac +++ b/gdb/configure.ac @@ -1481,8 +1481,8 @@ if test "x$enable_multi_ice" = xyes; then AC_CONFIG_SUBDIRS(multi-ice) fi -# We only build gdbserver automatically if host and target are the same. -if test "x$target" = "x$host"; then +# We only build gdbserver automatically in a native configuration. +if test "$gdb_native" = "yes"; then AC_MSG_CHECKING(whether gdbserver is supported on this host) if test "x$build_gdbserver" = xyes; then AC_MSG_RESULT(yes) diff --git a/gdb/configure.tgt b/gdb/configure.tgt index 8c4ccb5..dd2e719 100644 --- a/gdb/configure.tgt +++ b/gdb/configure.tgt @@ -210,7 +210,9 @@ sparc-*-rtems*) gdb_target=embed ;; sparc-*-*) gdb_target=sparc ;; sparc64-*-*) gdb_target=sparc64 ;; -spu*-*-*) gdb_target=spu ;; +spu*-*-*) gdb_target=spu + build_gdbserver=yes + ;; xstormy16-*-*) gdb_target=xstormy16 ;; diff --git a/gdb/gdbserver/ChangeLog b/gdb/gdbserver/ChangeLog index 7d92da2..52c34e9 100644 --- a/gdb/gdbserver/ChangeLog +++ b/gdb/gdbserver/ChangeLog @@ -1,3 +1,10 @@ +2006-11-22 Ulrich Weigand <uweigand@de.ibm.com> + + * configure.srv: Add target "spu*-*-*". + * Makefile.in (clean): Remove reg-spu.c. + (reg-spu.c, reg-spu.o, spu-low.o): Add dependencies. + * spu-low.c: New file. + 2006-11-16 Daniel Jacobowitz <dan@codesourcery.com> * configure.ac: Correct td_thr_tls_get_addr test. diff --git a/gdb/gdbserver/Makefile.in b/gdb/gdbserver/Makefile.in index f443a28..9748c95 100644 --- a/gdb/gdbserver/Makefile.in +++ b/gdb/gdbserver/Makefile.in @@ -205,7 +205,7 @@ clean: rm -f version.c rm -f gdbserver gdbreplay core make.log rm -f reg-arm.c reg-i386.c reg-ia64.c reg-m32r.c reg-m68k.c reg-mips.c - rm -f reg-ppc.c reg-sh.c reg-x86-64.c reg-i386-linux.c + rm -f reg-ppc.c reg-sh.c reg-spu.c reg-x86-64.c reg-i386-linux.c rm -f reg-cris.c reg-crisv32.c reg-x86-64-linux.c maintainer-clean realclean distclean: clean @@ -289,6 +289,8 @@ linux-x86-64-low.o: linux-x86-64-low.c $(linux_low_h) $(server_h) \ win32-i386-low.o: win32-i386-low.c $(server_h) $(regdef_h) $(regcache_h) +spu-low.o: spu-low.c $(server_h) + reg-arm.o : reg-arm.c $(regdef_h) reg-arm.c : $(srcdir)/../regformats/reg-arm.dat $(regdat_sh) sh $(regdat_sh) $(srcdir)/../regformats/reg-arm.dat reg-arm.c @@ -331,6 +333,9 @@ reg-s390x.c : $(srcdir)/../regformats/reg-s390x.dat $(regdat_sh) reg-sh.o : reg-sh.c $(regdef_h) reg-sh.c : $(srcdir)/../regformats/reg-sh.dat $(regdat_sh) sh $(regdat_sh) $(srcdir)/../regformats/reg-sh.dat reg-sh.c +reg-spu.o : reg-spu.c $(regdef_h) +reg-spu.c : $(srcdir)/../regformats/reg-spu.dat $(regdat_sh) + sh $(regdat_sh) $(srcdir)/../regformats/reg-spu.dat reg-spu.c reg-x86-64.o : reg-x86-64.c $(regdef_h) reg-x86-64.c : $(srcdir)/../regformats/reg-x86-64.dat $(regdat_sh) sh $(regdat_sh) $(srcdir)/../regformats/reg-x86-64.dat reg-x86-64.c diff --git a/gdb/gdbserver/configure.srv b/gdb/gdbserver/configure.srv index 3287955..5a4792c 100644 --- a/gdb/gdbserver/configure.srv +++ b/gdb/gdbserver/configure.srv @@ -101,6 +101,9 @@ case "${target}" in srv_linux_usrregs=yes srv_linux_thread_db=yes ;; + spu*-*-*) srv_regobj=reg-spu.o + srv_tgtobj="spu-low.o" + ;; x86_64-*-linux*) srv_regobj=reg-x86-64-linux.o srv_tgtobj="linux-low.o linux-x86-64-low.o i387-fp.o" srv_linux_regsets=yes diff --git a/gdb/gdbserver/spu-low.c b/gdb/gdbserver/spu-low.c new file mode 100644 index 0000000..024a052 --- /dev/null +++ b/gdb/gdbserver/spu-low.c @@ -0,0 +1,585 @@ +/* Low level interface to SPUs, for the remote server for GDB. + Copyright (C) 2006 Free Software Foundation, Inc. + + Contributed by Ulrich Weigand <uweigand@de.ibm.com>. + + This file is part of GDB. + + This program is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 2 of the License, or + (at your option) any later version. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program; if not, write to the Free Software + Foundation, Inc., 51 Franklin Street, Fifth Floor, + Boston, MA 02110-1301, USA. */ + +#include "server.h" + +#include <sys/wait.h> +#include <stdio.h> +#include <sys/ptrace.h> +#include <fcntl.h> +#include <string.h> +#include <stdlib.h> +#include <unistd.h> +#include <errno.h> +#include <sys/syscall.h> + +/* Some older glibc versions do not define this. */ +#ifndef __WNOTHREAD +#define __WNOTHREAD 0x20000000 /* Don't wait on children of other + threads in this group */ +#endif + +#define PTRACE_TYPE_RET long +#define PTRACE_TYPE_ARG3 long + +/* Number of registers. */ +#define SPU_NUM_REGS 130 +#define SPU_NUM_CORE_REGS 128 + +/* Special registers. */ +#define SPU_ID_REGNUM 128 +#define SPU_PC_REGNUM 129 + +/* PPU side system calls. */ +#define INSTR_SC 0x44000002 +#define NR_spu_run 0x0116 + +/* Get current thread ID (Linux task ID). */ +#define current_tid ((struct inferior_list_entry *)current_inferior)->id + +/* These are used in remote-utils.c. */ +int using_threads = 0; +int debug_threads = 0; + + +/* Fetch PPU register REGNO. */ +static CORE_ADDR +fetch_ppc_register (int regno) +{ + PTRACE_TYPE_RET res; + + int tid = current_tid; + +#ifndef __powerpc64__ + /* If running as a 32-bit process on a 64-bit system, we attempt + to get the full 64-bit register content of the target process. + If the PPC special ptrace call fails, we're on a 32-bit system; + just fall through to the regular ptrace call in that case. */ + { + char buf[8]; + + errno = 0; + ptrace (PPC_PTRACE_PEEKUSR_3264, tid, + (PTRACE_TYPE_ARG3) (regno * 8), buf); + if (errno == 0) + ptrace (PPC_PTRACE_PEEKUSR_3264, tid, + (PTRACE_TYPE_ARG3) (regno * 8 + 4), buf + 4); + if (errno == 0) + return (CORE_ADDR) *(unsigned long long *)buf; + } +#endif + + errno = 0; + res = ptrace (PT_READ_U, tid, + (PTRACE_TYPE_ARG3) (regno * sizeof (PTRACE_TYPE_RET)), 0); + if (errno != 0) + { + char mess[128]; + sprintf (mess, "reading PPC register #%d", regno); + perror_with_name (mess); + } + + return (CORE_ADDR) (unsigned long) res; +} + +/* Fetch WORD from PPU memory at (aligned) MEMADDR in thread TID. */ +static int +fetch_ppc_memory_1 (int tid, CORE_ADDR memaddr, PTRACE_TYPE_RET *word) +{ + errno = 0; + +#ifndef __powerpc64__ + if (memaddr >> 32) + { + unsigned long long addr_8 = (unsigned long long) memaddr; + ptrace (PPC_PTRACE_PEEKTEXT_3264, tid, (PTRACE_TYPE_ARG3) &addr_8, word); + } + else +#endif + *word = ptrace (PT_READ_I, tid, (PTRACE_TYPE_ARG3) (size_t) memaddr, 0); + + return errno; +} + +/* Store WORD into PPU memory at (aligned) MEMADDR in thread TID. */ +static int +store_ppc_memory_1 (int tid, CORE_ADDR memaddr, PTRACE_TYPE_RET word) +{ + errno = 0; + +#ifndef __powerpc64__ + if (memaddr >> 32) + { + unsigned long long addr_8 = (unsigned long long) memaddr; + ptrace (PPC_PTRACE_POKEDATA_3264, tid, (PTRACE_TYPE_ARG3) &addr_8, word); + } + else +#endif + ptrace (PT_WRITE_D, tid, (PTRACE_TYPE_ARG3) (size_t) memaddr, word); + + return errno; +} + +/* Fetch LEN bytes of PPU memory at MEMADDR to MYADDR. */ +static int +fetch_ppc_memory (CORE_ADDR memaddr, char *myaddr, int len) +{ + int i, ret; + + CORE_ADDR addr = memaddr & -(CORE_ADDR) sizeof (PTRACE_TYPE_RET); + int count = ((((memaddr + len) - addr) + sizeof (PTRACE_TYPE_RET) - 1) + / sizeof (PTRACE_TYPE_RET)); + PTRACE_TYPE_RET *buffer; + + int tid = current_tid; + + buffer = (PTRACE_TYPE_RET *) alloca (count * sizeof (PTRACE_TYPE_RET)); + for (i = 0; i < count; i++, addr += sizeof (PTRACE_TYPE_RET)) + if ((ret = fetch_ppc_memory_1 (tid, addr, &buffer[i])) != 0) + return ret; + + memcpy (myaddr, + (char *) buffer + (memaddr & (sizeof (PTRACE_TYPE_RET) - 1)), + len); + + return 0; +} + +/* Store LEN bytes from MYADDR to PPU memory at MEMADDR. */ +static int +store_ppc_memory (CORE_ADDR memaddr, char *myaddr, int len) +{ + int i, ret; + + CORE_ADDR addr = memaddr & -(CORE_ADDR) sizeof (PTRACE_TYPE_RET); + int count = ((((memaddr + len) - addr) + sizeof (PTRACE_TYPE_RET) - 1) + / sizeof (PTRACE_TYPE_RET)); + PTRACE_TYPE_RET *buffer; + + int tid = current_tid; + + buffer = (PTRACE_TYPE_RET *) alloca (count * sizeof (PTRACE_TYPE_RET)); + + if (addr != memaddr || len < (int) sizeof (PTRACE_TYPE_RET)) + if ((ret = fetch_ppc_memory_1 (tid, addr, &buffer[0])) != 0) + return ret; + + if (count > 1) + if ((ret = fetch_ppc_memory_1 (tid, addr + (count - 1) + * sizeof (PTRACE_TYPE_RET), + &buffer[count - 1])) != 0) + return ret; + + memcpy ((char *) buffer + (memaddr & (sizeof (PTRACE_TYPE_RET) - 1)), + myaddr, len); + + for (i = 0; i < count; i++, addr += sizeof (PTRACE_TYPE_RET)) + if ((ret = store_ppc_memory_1 (tid, addr, buffer[i])) != 0) + return ret; + + return 0; +} + + +/* If the PPU thread is currently stopped on a spu_run system call, + return to FD and ADDR the file handle and NPC parameter address + used with the system call. Return non-zero if successful. */ +static int +parse_spufs_run (int *fd, CORE_ADDR *addr) +{ + char buf[4]; + CORE_ADDR pc = fetch_ppc_register (32); /* nip */ + + /* Fetch instruction preceding current NIP. */ + if (fetch_ppc_memory (pc-4, buf, 4) != 0) + return 0; + /* It should be a "sc" instruction. */ + if (*(unsigned int *)buf != INSTR_SC) + return 0; + /* System call number should be NR_spu_run. */ + if (fetch_ppc_register (0) != NR_spu_run) + return 0; + + /* Register 3 contains fd, register 4 the NPC param pointer. */ + *fd = fetch_ppc_register (34); /* orig_gpr3 */ + *addr = fetch_ppc_register (4); + return 1; +} + + +/* Copy LEN bytes at OFFSET in spufs file ANNEX into/from READBUF or WRITEBUF, + using the /proc file system. */ +static int +spu_proc_xfer_spu (const char *annex, unsigned char *readbuf, + const unsigned char *writebuf, + CORE_ADDR offset, int len) +{ + char buf[128]; + int fd = 0; + int ret = -1; + + if (!annex) + return 0; + + sprintf (buf, "/proc/%ld/fd/%s", current_tid, annex); + fd = open (buf, writebuf? O_WRONLY : O_RDONLY); + if (fd <= 0) + return -1; + + if (offset != 0 + && lseek (fd, (off_t) offset, SEEK_SET) != (off_t) offset) + { + close (fd); + return -1; + } + + if (writebuf) + ret = write (fd, writebuf, (size_t) len); + else if (readbuf) + ret = read (fd, readbuf, (size_t) len); + + close (fd); + return ret; +} + + +/* Start an inferior process and returns its pid. + ALLARGS is a vector of program-name and args. */ +static int +spu_create_inferior (char *program, char **allargs) +{ + int pid; + + pid = fork (); + if (pid < 0) + perror_with_name ("fork"); + + if (pid == 0) + { + ptrace (PTRACE_TRACEME, 0, 0, 0); + + setpgid (0, 0); + + execv (program, allargs); + + fprintf (stderr, "Cannot exec %s: %s.\n", program, + strerror (errno)); + fflush (stderr); + _exit (0177); + } + + add_thread (pid, NULL, pid); + return pid; +} + +/* Attach to an inferior process. */ +int +spu_attach (unsigned long pid) +{ + if (ptrace (PTRACE_ATTACH, pid, 0, 0) != 0) + { + fprintf (stderr, "Cannot attach to process %ld: %s (%d)\n", pid, + strerror (errno), errno); + fflush (stderr); + _exit (0177); + } + + add_thread (pid, NULL, pid); + return 0; +} + +/* Kill the inferior process. */ +static void +spu_kill (void) +{ + ptrace (PTRACE_KILL, current_tid, 0, 0); +} + +/* Detach from inferior process. */ +static void +spu_detach (void) +{ + ptrace (PTRACE_DETACH, current_tid, 0, 0); +} + +/* Return nonzero if the given thread is still alive. */ +static int +spu_thread_alive (unsigned long tid) +{ + return tid == current_tid; +} + +/* Resume process. */ +static void +spu_resume (struct thread_resume *resume_info) +{ + while (resume_info->thread != -1 + && resume_info->thread != current_tid) + resume_info++; + + block_async_io (); + enable_async_io (); + + if (resume_info->leave_stopped) + return; + + /* We don't support hardware single-stepping right now, assume + GDB knows to use software single-stepping. */ + if (resume_info->step) + fprintf (stderr, "Hardware single-step not supported.\n"); + + regcache_invalidate (); + + errno = 0; + ptrace (PTRACE_CONT, current_tid, 0, resume_info->sig); + if (errno) + perror_with_name ("ptrace"); +} + +/* Wait for process, returns status. */ +static unsigned char +spu_wait (char *status) +{ + int tid = current_tid; + int w; + int ret; + + enable_async_io (); + unblock_async_io (); + + while (1) + { + ret = waitpid (tid, &w, WNOHANG | __WALL | __WNOTHREAD); + + if (ret == -1) + { + if (errno != ECHILD) + perror_with_name ("waitpid"); + } + else if (ret > 0) + break; + + usleep (1000); + } + + /* On the first wait, continue running the inferior until we are + blocked inside an spu_run system call. */ + if (!server_waiting) + { + int fd; + CORE_ADDR addr; + + while (!parse_spufs_run (&fd, &addr)) + { + ptrace (PT_SYSCALL, tid, (PTRACE_TYPE_ARG3) 0, 0); + waitpid (tid, NULL, __WALL | __WNOTHREAD); + } + } + + disable_async_io (); + + if (WIFEXITED (w)) + { + fprintf (stderr, "\nChild exited with retcode = %x \n", WEXITSTATUS (w)); + *status = 'W'; + clear_inferiors (); + return ((unsigned char) WEXITSTATUS (w)); + } + else if (!WIFSTOPPED (w)) + { + fprintf (stderr, "\nChild terminated with signal = %x \n", WTERMSIG (w)); + *status = 'X'; + clear_inferiors (); + return ((unsigned char) WTERMSIG (w)); + } + + /* After attach, we may have received a SIGSTOP. Do not return this + as signal to GDB, or else it will try to continue with SIGSTOP ... */ + if (!server_waiting) + { + *status = 'T'; + return 0; + } + + *status = 'T'; + return ((unsigned char) WSTOPSIG (w)); +} + +/* Fetch inferior registers. */ +static void +spu_fetch_registers (int regno) +{ + int fd; + CORE_ADDR addr; + + /* ??? Some callers use 0 to mean all registers. */ + if (regno == 0) + regno = -1; + + /* We must be stopped on a spu_run system call. */ + if (!parse_spufs_run (&fd, &addr)) + return; + + /* The ID register holds the spufs file handle. */ + if (regno == -1 || regno == SPU_ID_REGNUM) + supply_register (SPU_ID_REGNUM, (char *)&fd); + + /* The NPC register is found at ADDR. */ + if (regno == -1 || regno == SPU_PC_REGNUM) + { + char buf[4]; + if (fetch_ppc_memory (addr, buf, 4) == 0) + supply_register (SPU_PC_REGNUM, buf); + } + + /* The GPRs are found in the "regs" spufs file. */ + if (regno == -1 || (regno >= 0 && regno < SPU_NUM_CORE_REGS)) + { + unsigned char buf[16*SPU_NUM_CORE_REGS]; + char annex[32]; + int i; + + sprintf (annex, "%d/regs", fd); + if (spu_proc_xfer_spu (annex, buf, NULL, 0, sizeof buf) == sizeof buf) + for (i = 0; i < SPU_NUM_CORE_REGS; i++) + supply_register (i, buf + i*16); + } +} + +/* Store inferior registers. */ +static void +spu_store_registers (int regno) +{ + int fd; + CORE_ADDR addr; + + /* ??? Some callers use 0 to mean all registers. */ + if (regno == 0) + regno = -1; + + /* We must be stopped on a spu_run system call. */ + if (!parse_spufs_run (&fd, &addr)) + return; + + /* The NPC register is found at ADDR. */ + if (regno == -1 || regno == SPU_PC_REGNUM) + { + char buf[4]; + collect_register (SPU_PC_REGNUM, buf); + store_ppc_memory (addr, buf, 4); + } + + /* The GPRs are found in the "regs" spufs file. */ + if (regno == -1 || (regno >= 0 && regno < SPU_NUM_CORE_REGS)) + { + unsigned char buf[16*SPU_NUM_CORE_REGS]; + char annex[32]; + int i; + + for (i = 0; i < SPU_NUM_CORE_REGS; i++) + collect_register (i, buf + i*16); + + sprintf (annex, "%d/regs", fd); + spu_proc_xfer_spu (annex, NULL, buf, 0, sizeof buf); + } +} + +/* Copy LEN bytes from inferior's memory starting at MEMADDR + to debugger memory starting at MYADDR. */ +static int +spu_read_memory (CORE_ADDR memaddr, unsigned char *myaddr, int len) +{ + int fd, ret; + CORE_ADDR addr; + char annex[32]; + + /* We must be stopped on a spu_run system call. */ + if (!parse_spufs_run (&fd, &addr)) + return 0; + + /* Use the "mem" spufs file to access SPU local store. */ + sprintf (annex, "%d/mem", fd); + ret = spu_proc_xfer_spu (annex, myaddr, NULL, memaddr, len); + return ret == len ? 0 : EIO; +} + +/* Copy LEN bytes of data from debugger memory at MYADDR + to inferior's memory at MEMADDR. + On failure (cannot write the inferior) + returns the value of errno. */ +static int +spu_write_memory (CORE_ADDR memaddr, const unsigned char *myaddr, int len) +{ + int fd, ret; + CORE_ADDR addr; + char annex[32]; + + /* We must be stopped on a spu_run system call. */ + if (!parse_spufs_run (&fd, &addr)) + return 0; + + /* Use the "mem" spufs file to access SPU local store. */ + sprintf (annex, "%d/mem", fd); + ret = spu_proc_xfer_spu (annex, NULL, myaddr, memaddr, len); + return ret == len ? 0 : EIO; +} + +/* Look up special symbols -- unneded here. */ +static void +spu_look_up_symbols (void) +{ +} + +/* Send signal to inferior. */ +static void +spu_send_signal (int signo) +{ + syscall (SYS_tkill, current_tid, signo); +} + + +static struct target_ops spu_target_ops = { + spu_create_inferior, + spu_attach, + spu_kill, + spu_detach, + spu_thread_alive, + spu_resume, + spu_wait, + spu_fetch_registers, + spu_store_registers, + spu_read_memory, + spu_write_memory, + spu_look_up_symbols, + spu_send_signal, + NULL, +}; + +void +initialize_low (void) +{ + static const unsigned char breakpoint[] = { 0x00, 0x00, 0x3f, 0xff }; + + set_target_ops (&spu_target_ops); + set_breakpoint_data (breakpoint, sizeof breakpoint); + init_registers (); +} diff --git a/gdb/regformats/reg-spu.dat b/gdb/regformats/reg-spu.dat new file mode 100644 index 0000000..6ba92b6 --- /dev/null +++ b/gdb/regformats/reg-spu.dat @@ -0,0 +1,132 @@ +name:spu +expedite:r0,r1,npc +128:r0 +128:r1 +128:r2 +128:r3 +128:r4 +128:r5 +128:r6 +128:r7 +128:r8 +128:r9 +128:r10 +128:r11 +128:r12 +128:r13 +128:r14 +128:r15 +128:r16 +128:r17 +128:r18 +128:r19 +128:r20 +128:r21 +128:r22 +128:r23 +128:r24 +128:r25 +128:r26 +128:r27 +128:r28 +128:r29 +128:r30 +128:r31 +128:r32 +128:r33 +128:r34 +128:r35 +128:r36 +128:r37 +128:r38 +128:r39 +128:r40 +128:r41 +128:r42 +128:r43 +128:r44 +128:r45 +128:r46 +128:r47 +128:r48 +128:r49 +128:r50 +128:r51 +128:r52 +128:r53 +128:r54 +128:r55 +128:r56 +128:r57 +128:r58 +128:r59 +128:r60 +128:r61 +128:r62 +128:r63 +128:r64 +128:r65 +128:r66 +128:r67 +128:r68 +128:r69 +128:r70 +128:r71 +128:r72 +128:r73 +128:r74 +128:r75 +128:r76 +128:r77 +128:r78 +128:r79 +128:r80 +128:r81 +128:r82 +128:r83 +128:r84 +128:r85 +128:r86 +128:r87 +128:r88 +128:r89 +128:r90 +128:r91 +128:r92 +128:r93 +128:r94 +128:r95 +128:r96 +128:r97 +128:r98 +128:r99 +128:r100 +128:r101 +128:r102 +128:r103 +128:r104 +128:r105 +128:r106 +128:r107 +128:r108 +128:r109 +128:r110 +128:r111 +128:r112 +128:r113 +128:r114 +128:r115 +128:r116 +128:r117 +128:r118 +128:r119 +128:r120 +128:r121 +128:r122 +128:r123 +128:r124 +128:r125 +128:r126 +128:r127 +32:npc +32:id |