diff options
| -rw-r--r-- | gas/ChangeLog | 4 | ||||
| -rw-r--r-- | gas/config/tc-ppc.c | 60 | ||||
| -rw-r--r-- | include/opcode/ChangeLog | 4 | ||||
| -rw-r--r-- | include/opcode/ppc.h | 1 | ||||
| -rw-r--r-- | opcodes/ChangeLog | 4 | ||||
| -rw-r--r-- | opcodes/ppc-opc.c | 151 |
6 files changed, 116 insertions, 108 deletions
diff --git a/gas/ChangeLog b/gas/ChangeLog index 095841f..369a1c3 100644 --- a/gas/ChangeLog +++ b/gas/ChangeLog @@ -1,3 +1,7 @@ +2001-08-10 Alan Modra <amodra@bigpond.net.au> + + * config/tc-ppc.c: Revert 2001-08-08. + 2001-08-09 Alan Modra <amodra@bigpond.net.au> * symbols.c: Add missing prototypes. diff --git a/gas/config/tc-ppc.c b/gas/config/tc-ppc.c index 115920f..0710a67 100644 --- a/gas/config/tc-ppc.c +++ b/gas/config/tc-ppc.c @@ -4945,14 +4945,43 @@ md_apply_fix3 (fixp, valuep, seg) /* Determine a BFD reloc value based on the operand information. We are only prepared to turn a few of the operands into relocs. - For other operand types, give an error. */ - if (operand->reloc == 0) + FIXME: We need to handle the DS field at the very least. + FIXME: Selecting the reloc type is a bit haphazard; perhaps + there should be a new field in the operand table. */ + if ((operand->flags & PPC_OPERAND_RELATIVE) != 0 + && operand->bits == 26 + && operand->shift == 0) + fixp->fx_r_type = BFD_RELOC_PPC_B26; + else if ((operand->flags & PPC_OPERAND_RELATIVE) != 0 + && operand->bits == 16 + && operand->shift == 0) + fixp->fx_r_type = BFD_RELOC_PPC_B16; + else if ((operand->flags & PPC_OPERAND_ABSOLUTE) != 0 + && operand->bits == 26 + && operand->shift == 0) + fixp->fx_r_type = BFD_RELOC_PPC_BA26; + else if ((operand->flags & PPC_OPERAND_ABSOLUTE) != 0 + && operand->bits == 16 + && operand->shift == 0) + fixp->fx_r_type = BFD_RELOC_PPC_BA16; + else if ((operand->flags & PPC_OPERAND_PARENS) != 0 + && operand->bits == 16 + && operand->shift == 0 + && fixp->fx_addsy != NULL + && ppc_is_toc_sym (fixp->fx_addsy)) + { + fixp->fx_size = 2; + if (target_big_endian) + fixp->fx_where += 2; + fixp->fx_r_type = BFD_RELOC_PPC_TOC16; + } + else { char *sfile; unsigned int sline; /* Use expr_symbol_where to see if this is an expression - symbol. */ + symbol. */ if (expr_symbol_where (fixp->fx_addsy, &sfile, &sline)) as_bad_where (fixp->fx_file, fixp->fx_line, _("unresolved expression that must be resolved")); @@ -4962,28 +4991,6 @@ md_apply_fix3 (fixp, valuep, seg) fixp->fx_done = 1; return 1; } - - fixp->fx_r_type = operand->reloc; - - if ((operand->flags & PPC_OPERAND_PARENS) != 0 && fixp->fx_addsy != NULL) - { - /* For ld/st/la reloc types (`la' == load address). - Instruction with D or DS field. */ - if (ppc_is_toc_sym (fixp->fx_addsy)) - { - fixp->fx_size = 2; - if (target_big_endian) - fixp->fx_where += 2; - } - else - { - as_bad_where (fixp->fx_file, fixp->fx_line, - _("unsupported relocation against %s"), - S_GET_NAME (fixp->fx_addsy)); - fixp->fx_done = 1; - return 1; - } - } } else { @@ -5010,12 +5017,10 @@ md_apply_fix3 (fixp, valuep, seg) if (fixp->fx_pcrel) fixp->fx_r_type = BFD_RELOC_64_PCREL; /* fall through */ - case BFD_RELOC_64_PCREL: md_number_to_chars (fixp->fx_frag->fr_literal + fixp->fx_where, value, 8); break; - case BFD_RELOC_LO16: case BFD_RELOC_16: case BFD_RELOC_GPREL16: @@ -5066,7 +5071,6 @@ md_apply_fix3 (fixp, valuep, seg) md_number_to_chars (fixp->fx_frag->fr_literal + fixp->fx_where, value >> 16, 2); break; - case BFD_RELOC_HI16_S: if (fixp->fx_pcrel) abort (); diff --git a/include/opcode/ChangeLog b/include/opcode/ChangeLog index 67e9f73..b95cf1e 100644 --- a/include/opcode/ChangeLog +++ b/include/opcode/ChangeLog @@ -1,3 +1,7 @@ +2001-08-10 Alan Modra <amodra@one.net.au> + + * ppc.h: Revert 2001-08-08. + 2001-08-08 Alan Modra <amodra@one.net.au> 1999-10-25 Torbjorn Granlund <tege@swox.com> diff --git a/include/opcode/ppc.h b/include/opcode/ppc.h index 2c11fcd..d23e1c6 100644 --- a/include/opcode/ppc.h +++ b/include/opcode/ppc.h @@ -144,7 +144,6 @@ struct powerpc_operand /* One bit syntax flags. */ unsigned long flags; - int reloc; }; /* Elements in the table are retrieved by indexing with values from diff --git a/opcodes/ChangeLog b/opcodes/ChangeLog index 64322ee..46b32c8 100644 --- a/opcodes/ChangeLog +++ b/opcodes/ChangeLog @@ -1,3 +1,7 @@ +2001-08-10 Alan Modra <amodra@bigpond.net.au> + + * ppc-opc.c: Revert 2001-08-08. + 2001-08-09 Alan Modra <amodra@bigpond.net.au> * dis-buf.c (generic_strcat_address): Add missing prototype. diff --git a/opcodes/ppc-opc.c b/opcodes/ppc-opc.c index 44c4cda..311a5ba 100644 --- a/opcodes/ppc-opc.c +++ b/opcodes/ppc-opc.c @@ -24,7 +24,6 @@ Software Foundation, 59 Temple Place - Suite 330, Boston, MA #include "sysdep.h" #include "opcode/ppc.h" #include "opintl.h" -#include "bfd.h" /* This file holds the PowerPC opcode table. The opcode table includes almost all of the extended instruction mnemonics. This @@ -94,247 +93,241 @@ const struct powerpc_operand powerpc_operands[] = /* The zero index is used to indicate the end of the list of operands. */ #define UNUSED 0 - { 0, 0, 0, 0, 0, 0}, + { 0, 0, 0, 0, 0 }, /* The BA field in an XL form instruction. */ #define BA UNUSED + 1 #define BA_MASK (0x1f << 16) - { 5, 16, 0, 0, PPC_OPERAND_CR, 0 }, + { 5, 16, 0, 0, PPC_OPERAND_CR }, /* The BA field in an XL form instruction when it must be the same as the BT field in the same instruction. */ #define BAT BA + 1 - { 5, 16, insert_bat, extract_bat, PPC_OPERAND_FAKE, 0 }, + { 5, 16, insert_bat, extract_bat, PPC_OPERAND_FAKE }, /* The BB field in an XL form instruction. */ #define BB BAT + 1 #define BB_MASK (0x1f << 11) - { 5, 11, 0, 0, PPC_OPERAND_CR, 0 }, + { 5, 11, 0, 0, PPC_OPERAND_CR }, /* The BB field in an XL form instruction when it must be the same as the BA field in the same instruction. */ #define BBA BB + 1 - { 5, 11, insert_bba, extract_bba, PPC_OPERAND_FAKE, 0 }, + { 5, 11, insert_bba, extract_bba, PPC_OPERAND_FAKE }, /* The BD field in a B form instruction. The lower two bits are forced to zero. */ #define BD BBA + 1 - { 16, 0, insert_bd, extract_bd, PPC_OPERAND_RELATIVE | PPC_OPERAND_SIGNED, - BFD_RELOC_PPC_B16 }, + { 16, 0, insert_bd, extract_bd, PPC_OPERAND_RELATIVE | PPC_OPERAND_SIGNED }, /* The BD field in a B form instruction when absolute addressing is used. */ #define BDA BD + 1 - { 16, 0, insert_bd, extract_bd, PPC_OPERAND_ABSOLUTE | PPC_OPERAND_SIGNED, - BFD_RELOC_PPC_BA16 }, + { 16, 0, insert_bd, extract_bd, PPC_OPERAND_ABSOLUTE | PPC_OPERAND_SIGNED }, /* The BD field in a B form instruction when the - modifier is used. This sets the y bit of the BO field appropriately. */ #define BDM BDA + 1 - { 16, 0, insert_bdm, extract_bdm, PPC_OPERAND_RELATIVE | PPC_OPERAND_SIGNED, - BFD_RELOC_PPC_B16 }, + { 16, 0, insert_bdm, extract_bdm, + PPC_OPERAND_RELATIVE | PPC_OPERAND_SIGNED }, /* The BD field in a B form instruction when the - modifier is used and absolute address is used. */ #define BDMA BDM + 1 - { 16, 0, insert_bdm, extract_bdm, PPC_OPERAND_ABSOLUTE | PPC_OPERAND_SIGNED, - BFD_RELOC_PPC_BA16 }, + { 16, 0, insert_bdm, extract_bdm, + PPC_OPERAND_ABSOLUTE | PPC_OPERAND_SIGNED }, /* The BD field in a B form instruction when the + modifier is used. This sets the y bit of the BO field appropriately. */ #define BDP BDMA + 1 - { 16, 0, insert_bdp, extract_bdp, PPC_OPERAND_RELATIVE | PPC_OPERAND_SIGNED, - BFD_RELOC_PPC_B16 }, + { 16, 0, insert_bdp, extract_bdp, + PPC_OPERAND_RELATIVE | PPC_OPERAND_SIGNED }, /* The BD field in a B form instruction when the + modifier is used and absolute addressing is used. */ #define BDPA BDP + 1 - { 16, 0, insert_bdp, extract_bdp, PPC_OPERAND_ABSOLUTE | PPC_OPERAND_SIGNED, - BFD_RELOC_PPC_BA16 }, + { 16, 0, insert_bdp, extract_bdp, + PPC_OPERAND_ABSOLUTE | PPC_OPERAND_SIGNED }, /* The BF field in an X or XL form instruction. */ #define BF BDPA + 1 - { 3, 23, 0, 0, PPC_OPERAND_CR, 0 }, + { 3, 23, 0, 0, PPC_OPERAND_CR }, /* An optional BF field. This is used for comparison instructions, in which an omitted BF field is taken as zero. */ #define OBF BF + 1 - { 3, 23, 0, 0, PPC_OPERAND_CR | PPC_OPERAND_OPTIONAL, 0 }, + { 3, 23, 0, 0, PPC_OPERAND_CR | PPC_OPERAND_OPTIONAL }, /* The BFA field in an X or XL form instruction. */ #define BFA OBF + 1 - { 3, 18, 0, 0, PPC_OPERAND_CR, 0 }, + { 3, 18, 0, 0, PPC_OPERAND_CR }, /* The BI field in a B form or XL form instruction. */ #define BI BFA + 1 #define BI_MASK (0x1f << 16) - { 5, 16, 0, 0, PPC_OPERAND_CR, 0 }, + { 5, 16, 0, 0, PPC_OPERAND_CR }, /* The BO field in a B form instruction. Certain values are illegal. */ #define BO BI + 1 #define BO_MASK (0x1f << 21) - { 5, 21, insert_bo, extract_bo, 0, 0 }, + { 5, 21, insert_bo, extract_bo, 0 }, /* The BO field in a B form instruction when the + or - modifier is used. This is like the BO field, but it must be even. */ #define BOE BO + 1 - { 5, 21, insert_boe, extract_boe, 0, 0 }, + { 5, 21, insert_boe, extract_boe, 0 }, /* The BT field in an X or XL form instruction. */ #define BT BOE + 1 - { 5, 21, 0, 0, PPC_OPERAND_CR, 0 }, + { 5, 21, 0, 0, PPC_OPERAND_CR }, /* The condition register number portion of the BI field in a B form or XL form instruction. This is used for the extended conditional branch mnemonics, which set the lower two bits of the BI field. This field is optional. */ #define CR BT + 1 - { 3, 18, 0, 0, PPC_OPERAND_CR | PPC_OPERAND_OPTIONAL, 0 }, + { 3, 18, 0, 0, PPC_OPERAND_CR | PPC_OPERAND_OPTIONAL }, /* The D field in a D form instruction. This is a displacement off a register, and implies that the next operand is a register in parentheses. */ #define D CR + 1 - { 16, 0, 0, 0, PPC_OPERAND_PARENS | PPC_OPERAND_SIGNED, - BFD_RELOC_PPC_TOC16 }, + { 16, 0, 0, 0, PPC_OPERAND_PARENS | PPC_OPERAND_SIGNED }, /* The DS field in a DS form instruction. This is like D, but the lower two bits are forced to zero. */ #define DS D + 1 - { 16, 0, insert_ds, extract_ds, PPC_OPERAND_PARENS | PPC_OPERAND_SIGNED, - BFD_RELOC_PPC_TOC16 }, + { 16, 0, insert_ds, extract_ds, PPC_OPERAND_PARENS | PPC_OPERAND_SIGNED }, /* The E field in a wrteei instruction. */ #define E DS + 1 - { 1, 15, 0, 0, 0, 0 }, + { 1, 15, 0, 0, 0 }, /* The FL1 field in a POWER SC form instruction. */ #define FL1 E + 1 - { 4, 12, 0, 0, 0, 0 }, + { 4, 12, 0, 0, 0 }, /* The FL2 field in a POWER SC form instruction. */ #define FL2 FL1 + 1 - { 3, 2, 0, 0, 0, 0 }, + { 3, 2, 0, 0, 0 }, /* The FLM field in an XFL form instruction. */ #define FLM FL2 + 1 - { 8, 17, 0, 0, 0, 0 }, + { 8, 17, 0, 0, 0 }, /* The FRA field in an X or A form instruction. */ #define FRA FLM + 1 #define FRA_MASK (0x1f << 16) - { 5, 16, 0, 0, PPC_OPERAND_FPR, 0 }, + { 5, 16, 0, 0, PPC_OPERAND_FPR }, /* The FRB field in an X or A form instruction. */ #define FRB FRA + 1 #define FRB_MASK (0x1f << 11) - { 5, 11, 0, 0, PPC_OPERAND_FPR, 0 }, + { 5, 11, 0, 0, PPC_OPERAND_FPR }, /* The FRC field in an A form instruction. */ #define FRC FRB + 1 #define FRC_MASK (0x1f << 6) - { 5, 6, 0, 0, PPC_OPERAND_FPR, 0 }, + { 5, 6, 0, 0, PPC_OPERAND_FPR }, /* The FRS field in an X form instruction or the FRT field in a D, X or A form instruction. */ #define FRS FRC + 1 #define FRT FRS - { 5, 21, 0, 0, PPC_OPERAND_FPR, 0 }, + { 5, 21, 0, 0, PPC_OPERAND_FPR }, /* The FXM field in an XFX instruction. */ #define FXM FRS + 1 #define FXM_MASK (0xff << 12) - { 8, 12, 0, 0, 0, 0 }, + { 8, 12, 0, 0, 0 }, /* The L field in a D or X form instruction. */ #define L FXM + 1 - { 1, 21, 0, 0, PPC_OPERAND_OPTIONAL, 0 }, + { 1, 21, 0, 0, PPC_OPERAND_OPTIONAL }, /* The LEV field in a POWER SC form instruction. */ #define LEV L + 1 - { 7, 5, 0, 0, 0, 0 }, + { 7, 5, 0, 0, 0 }, /* The LI field in an I form instruction. The lower two bits are forced to zero. */ #define LI LEV + 1 - { 26, 0, insert_li, extract_li, PPC_OPERAND_RELATIVE | PPC_OPERAND_SIGNED, - BFD_RELOC_PPC_B26 }, + { 26, 0, insert_li, extract_li, PPC_OPERAND_RELATIVE | PPC_OPERAND_SIGNED }, /* The LI field in an I form instruction when used as an absolute address. */ #define LIA LI + 1 - { 26, 0, insert_li, extract_li, PPC_OPERAND_ABSOLUTE | PPC_OPERAND_SIGNED, - BFD_RELOC_PPC_BA26 }, + { 26, 0, insert_li, extract_li, PPC_OPERAND_ABSOLUTE | PPC_OPERAND_SIGNED }, /* The MB field in an M form instruction. */ #define MB LIA + 1 #define MB_MASK (0x1f << 6) - { 5, 6, 0, 0, 0, 0 }, + { 5, 6, 0, 0, 0 }, /* The ME field in an M form instruction. */ #define ME MB + 1 #define ME_MASK (0x1f << 1) - { 5, 1, 0, 0, 0, 0 }, + { 5, 1, 0, 0, 0 }, /* The MB and ME fields in an M form instruction expressed a single operand which is a bitmask indicating which bits to select. This is a two operand form using PPC_OPERAND_NEXT. See the description in opcode/ppc.h for what this means. */ #define MBE ME + 1 - { 5, 6, 0, 0, PPC_OPERAND_OPTIONAL | PPC_OPERAND_NEXT, 0 }, - { 32, 0, insert_mbe, extract_mbe, 0, 0 }, + { 5, 6, 0, 0, PPC_OPERAND_OPTIONAL | PPC_OPERAND_NEXT }, + { 32, 0, insert_mbe, extract_mbe, 0 }, /* The MB or ME field in an MD or MDS form instruction. The high bit is wrapped to the low end. */ #define MB6 MBE + 2 #define ME6 MB6 #define MB6_MASK (0x3f << 5) - { 6, 5, insert_mb6, extract_mb6, 0, 0 }, + { 6, 5, insert_mb6, extract_mb6, 0 }, /* The NB field in an X form instruction. The value 32 is stored as 0. */ #define NB MB6 + 1 - { 6, 11, insert_nb, extract_nb, 0, 0 }, + { 6, 11, insert_nb, extract_nb, 0 }, /* The NSI field in a D form instruction. This is the same as the SI field, only negated. */ #define NSI NB + 1 { 16, 0, insert_nsi, extract_nsi, - PPC_OPERAND_NEGATIVE | PPC_OPERAND_SIGNED, 0 }, + PPC_OPERAND_NEGATIVE | PPC_OPERAND_SIGNED }, /* The RA field in an D, DS, X, XO, M, or MDS form instruction. */ #define RA NSI + 1 #define RA_MASK (0x1f << 16) - { 5, 16, 0, 0, PPC_OPERAND_GPR, 0 }, + { 5, 16, 0, 0, PPC_OPERAND_GPR }, /* The RA field in a D or X form instruction which is an updating load, which means that the RA field may not be zero and may not equal the RT field. */ #define RAL RA + 1 - { 5, 16, insert_ral, 0, PPC_OPERAND_GPR, 0 }, + { 5, 16, insert_ral, 0, PPC_OPERAND_GPR }, /* The RA field in an lmw instruction, which has special value restrictions. */ #define RAM RAL + 1 - { 5, 16, insert_ram, 0, PPC_OPERAND_GPR, 0 }, + { 5, 16, insert_ram, 0, PPC_OPERAND_GPR }, /* The RA field in a D or X form instruction which is an updating store or an updating floating point load, which means that the RA field may not be zero. */ #define RAS RAM + 1 - { 5, 16, insert_ras, 0, PPC_OPERAND_GPR, 0 }, + { 5, 16, insert_ras, 0, PPC_OPERAND_GPR }, /* The RB field in an X, XO, M, or MDS form instruction. */ #define RB RAS + 1 #define RB_MASK (0x1f << 11) - { 5, 11, 0, 0, PPC_OPERAND_GPR, 0 }, + { 5, 11, 0, 0, PPC_OPERAND_GPR }, /* The RB field in an X form instruction when it must be the same as the RS field in the instruction. This is used for extended mnemonics like mr. */ #define RBS RB + 1 - { 5, 1, insert_rbs, extract_rbs, PPC_OPERAND_FAKE, 0 }, + { 5, 1, insert_rbs, extract_rbs, PPC_OPERAND_FAKE }, /* The RS field in a D, DS, X, XFX, XS, M, MD or MDS form instruction or the RT field in a D, DS, X, XFX or XO form @@ -342,101 +335,101 @@ const struct powerpc_operand powerpc_operands[] = #define RS RBS + 1 #define RT RS #define RT_MASK (0x1f << 21) - { 5, 21, 0, 0, PPC_OPERAND_GPR, 0 }, + { 5, 21, 0, 0, PPC_OPERAND_GPR }, /* The SH field in an X or M form instruction. */ #define SH RS + 1 #define SH_MASK (0x1f << 11) - { 5, 11, 0, 0, 0, 0 }, + { 5, 11, 0, 0, 0 }, /* The SH field in an MD form instruction. This is split. */ #define SH6 SH + 1 #define SH6_MASK ((0x1f << 11) | (1 << 1)) - { 6, 1, insert_sh6, extract_sh6, 0, 0 }, + { 6, 1, insert_sh6, extract_sh6, 0 }, /* The SI field in a D form instruction. */ #define SI SH6 + 1 - { 16, 0, 0, 0, PPC_OPERAND_SIGNED, 0 }, + { 16, 0, 0, 0, PPC_OPERAND_SIGNED }, /* The SI field in a D form instruction when we accept a wide range of positive values. */ #define SISIGNOPT SI + 1 - { 16, 0, 0, 0, PPC_OPERAND_SIGNED | PPC_OPERAND_SIGNOPT, 0 }, + { 16, 0, 0, 0, PPC_OPERAND_SIGNED | PPC_OPERAND_SIGNOPT }, /* The SPR field in an XFX form instruction. This is flipped--the lower 5 bits are stored in the upper 5 and vice- versa. */ #define SPR SISIGNOPT + 1 #define SPR_MASK (0x3ff << 11) - { 10, 11, insert_spr, extract_spr, 0, 0 }, + { 10, 11, insert_spr, extract_spr, 0 }, /* The BAT index number in an XFX form m[ft]ibat[lu] instruction. */ #define SPRBAT SPR + 1 #define SPRBAT_MASK (0x3 << 17) - { 2, 17, 0, 0, 0, 0 }, + { 2, 17, 0, 0, 0 }, /* The SPRG register number in an XFX form m[ft]sprg instruction. */ #define SPRG SPRBAT + 1 #define SPRG_MASK (0x3 << 16) - { 2, 16, 0, 0, 0, 0 }, + { 2, 16, 0, 0, 0 }, /* The SR field in an X form instruction. */ #define SR SPRG + 1 - { 4, 16, 0, 0, 0, 0 }, + { 4, 16, 0, 0, 0 }, /* The SV field in a POWER SC form instruction. */ #define SV SR + 1 - { 14, 2, 0, 0, 0, 0 }, + { 14, 2, 0, 0, 0 }, /* The TBR field in an XFX form instruction. This is like the SPR field, but it is optional. */ #define TBR SV + 1 - { 10, 11, insert_tbr, extract_tbr, PPC_OPERAND_OPTIONAL, 0 }, + { 10, 11, insert_tbr, extract_tbr, PPC_OPERAND_OPTIONAL }, /* The TO field in a D or X form instruction. */ #define TO TBR + 1 #define TO_MASK (0x1f << 21) - { 5, 21, 0, 0, 0, 0 }, + { 5, 21, 0, 0, 0 }, /* The U field in an X form instruction. */ #define U TO + 1 - { 4, 12, 0, 0, 0, 0 }, + { 4, 12, 0, 0, 0 }, /* The UI field in a D form instruction. */ #define UI U + 1 - { 16, 0, 0, 0, 0, 0 }, + { 16, 0, 0, 0, 0 }, /* The VA field in a VA, VX or VXR form instruction. */ #define VA UI + 1 #define VA_MASK (0x1f << 16) - {5, 16, 0, 0, PPC_OPERAND_VR, 0}, + {5, 16, 0, 0, PPC_OPERAND_VR}, /* The VB field in a VA, VX or VXR form instruction. */ #define VB VA + 1 #define VB_MASK (0x1f << 11) - {5, 11, 0, 0, PPC_OPERAND_VR, 0}, + {5, 11, 0, 0, PPC_OPERAND_VR}, /* The VC field in a VA form instruction. */ #define VC VB + 1 #define VC_MASK (0x1f << 6) - {5, 6, 0, 0, PPC_OPERAND_VR, 0}, + {5, 6, 0, 0, PPC_OPERAND_VR}, /* The VD or VS field in a VA, VX, VXR or X form instruction. */ #define VD VC + 1 #define VS VD #define VD_MASK (0x1f << 21) - {5, 21, 0, 0, PPC_OPERAND_VR, 0}, + {5, 21, 0, 0, PPC_OPERAND_VR}, /* The SIMM field in a VX form instruction. */ #define SIMM VD + 1 - { 5, 16, 0, 0, PPC_OPERAND_SIGNED, 0}, + { 5, 16, 0, 0, PPC_OPERAND_SIGNED}, /* The UIMM field in a VX form instruction. */ #define UIMM SIMM + 1 - { 5, 16, 0, 0, 0, 0 }, + { 5, 16, 0, 0, 0 }, /* The SHB field in a VA form instruction. */ #define SHB UIMM + 1 - { 4, 6, 0, 0, 0, 0 }, + { 4, 6, 0, 0, 0 }, }; /* The functions used to insert and extract complicated operands. */ |