diff options
| -rw-r--r-- | gdb/ChangeLog | 9 | ||||
| -rw-r--r-- | gdb/config/m68hc11/m68hc11.mt | 6 | ||||
| -rw-r--r-- | gdb/configure.tgt | 9 | ||||
| -rw-r--r-- | gdb/m68hc11-tdep.c | 754 |
4 files changed, 778 insertions, 0 deletions
diff --git a/gdb/ChangeLog b/gdb/ChangeLog index b0e4540..522ddff 100644 --- a/gdb/ChangeLog +++ b/gdb/ChangeLog @@ -1,3 +1,12 @@ +Thu Jul 27 14:06:27 2000 Andrew Cagney <cagney@b1.cygnus.com> + + From 2000-06-25 Stephane Carrez <Stephane.Carrez@worldnet.fr>: + * configure.tgt: Recognize the 68hc11. + * m68hc11-tdep.c: New file for 68hc11 target. + * config/m68hc11/m68hc11.mt: New file for 68hc11 port. + + * configure.tgt: When 68hc11, set gdb_multi_arch. + Wed Jul 26 17:22:53 2000 Andrew Cagney <cagney@b1.cygnus.com> * configure.in (GDB_MULTI_ARCH): Define from configure.tgt diff --git a/gdb/config/m68hc11/m68hc11.mt b/gdb/config/m68hc11/m68hc11.mt new file mode 100644 index 0000000..5e25eee --- /dev/null +++ b/gdb/config/m68hc11/m68hc11.mt @@ -0,0 +1,6 @@ +# Target: Motorola 68HC11 processor +TDEPFILES= m68hc11-tdep.o +TM_FILE= tm-m68hc11.h +SIM_OBS= remote-sim.o +SIM= ../sim/m68hc11/libsim.a -lm + diff --git a/gdb/configure.tgt b/gdb/configure.tgt index 5d4395a..9277e1e 100644 --- a/gdb/configure.tgt +++ b/gdb/configure.tgt @@ -17,6 +17,7 @@ arm*) gdb_target_cpu=arm ;; # OBSOLETE c[12]) gdb_target_cpu=convex ;; hppa*) gdb_target_cpu=pa ;; i[3456]86*) gdb_target_cpu=i386 ;; +m68hc11*|m6811*) gdb_target_cpu=m68hc11 ;; m68*) gdb_target_cpu=m68k ;; m88*) gdb_target_cpu=m88k ;; mips*) gdb_target_cpu=mips ;; @@ -133,6 +134,8 @@ ia64-*-linux*) gdb_target=linux ;; m32r-*-elf*) gdb_target=m32r ;; +m68hc11*-*-*|m6811*-*-*) gdb_target=m68hc11 ;; + m68000-*-sunos3*) gdb_target=sun2os3 ;; m68000-*-sunos4*) gdb_target=sun2os4 ;; @@ -299,3 +302,9 @@ z8k-*-coff*) gdb_target=z8k ;; esac + +# map GDB target onto multi-arch support + +case "${gdb_target}" in +m68hc11) gdb_multi_arch=yes ;; +esac diff --git a/gdb/m68hc11-tdep.c b/gdb/m68hc11-tdep.c new file mode 100644 index 0000000..82d71b2 --- /dev/null +++ b/gdb/m68hc11-tdep.c @@ -0,0 +1,754 @@ +/* Target-dependent code for Motorola 68HC11 + Copyright (C) 1999, 2000 Free Software Foundation, Inc. + Contributed by Stephane Carrez, stcarrez@worldnet.fr + +This file is part of GDB. + +This program is free software; you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation; either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program; if not, write to the Free Software +Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. */ + +#if 0 +/* FIXME: This is from tm-m68hc1.h */ + +#define GDB_TARGET_IS_M6811 + +/* Define the bit, byte, and word ordering of the machine. */ + +#define TARGET_BYTE_ORDER BIG_ENDIAN + +/* Offset from address of function to start of its code. + Zero on most machines. */ + +#define FUNCTION_START_OFFSET 0 + +#ifdef __STDC__ /* Forward decls for prototypes */ +struct frame_info; +struct frame_saved_regs; +struct type; +struct value; +#endif + +/* Advance PC across any function entry prologue instructions + to reach some "real" code. */ + +extern CORE_ADDR m68hc11_skip_prologue (); +#define SKIP_PROLOGUE(ip) \ + m68hc11_skip_prologue (ip) + + +/* Stack grows downward. */ + +#define INNER_THAN(lhs,rhs) ((lhs) < (rhs)) + +/* For a breakpoint, use "test". This is also the breakpoint + instruction on the 68HC12. */ +#define BREAKPOINT {0x0} + +/* If your kernel resets the pc after the trap happens you may need to + define this before including this file. */ +#define DECR_PC_AFTER_BREAK 0 + +extern char *m68hc11_register_names[]; +#define REGISTER_NAME(i) m68hc11_register_names[i] + +#define REGISTER_SIZE 2 + +/* Register numbers of various important registers. + Note that some of these values are "real" register numbers, + and correspond to the general registers of the machine, + and some are "phony" register numbers which are too large + to be actual register numbers as far as the user is concerned + but do serve to get the desired values when passed to read_register. */ + +#define X_REGNUM 0 +#define D_REGNUM 1 +#define Y_REGNUM 2 +#define SP_REGNUM 3 +#define PC_REGNUM 4 +#define A_REGNUM 5 +#define B_REGNUM 6 +#define PSW_REGNUM 7 +#define Z_REGNUM 8 +#define FP_REGNUM 9 +#define TMP_REGNUM 10 +#define ZS_REGNUM 11 +#define XY_REGNUM 12 +#define ZD1_REGNUM 13 +#define ZD32_REGNUM (ZD1_REGNUM+31) + +#define NUM_REGS (ZD32_REGNUM+1) + +#include "opcode/m68hc11.h" + +/* Say how much memory is needed to store a copy of the register set */ +#define REGISTER_BYTES ((NUM_REGS)*2) + +/* Index within `registers' of the first byte of the space for + register N. */ + +#define REGISTER_BYTE(N) ((N) * 2) + +/* Number of bytes of storage in the actual machine representation + for register N. */ + +#define REGISTER_RAW_SIZE(N) (2) + +/* Number of bytes of storage in the program's representation + for register N. */ + +#define REGISTER_VIRTUAL_SIZE(N) (2) + +/* Largest value REGISTER_RAW_SIZE can have. */ + +#define MAX_REGISTER_RAW_SIZE 8 + +/* Largest value REGISTER_VIRTUAL_SIZE can have. */ + +#define MAX_REGISTER_VIRTUAL_SIZE 8 + +/* Return the GDB type object for the "standard" data type + of data in register N. */ + +#define REGISTER_VIRTUAL_TYPE(N) builtin_type_uint16 + +/* Store the address of the place in which to copy the structure the + subroutine will return. This is called from call_function. + + We store structs through a pointer passed in D */ + +#define STORE_STRUCT_RETURN(ADDR, SP) \ + { write_register (D_REGNUM, (ADDR)); } + + +/* Write into appropriate registers a function return value + of type TYPE, given in virtual format. + + Things always get returned in D/X */ + +#define STORE_RETURN_VALUE(TYPE,VALBUF) \ + write_register_bytes (REGISTER_BYTE (D_REGNUM), VALBUF, TYPE_LENGTH (TYPE)) + + +/* Extract from an array REGBUF containing the (raw) register state + the address in which a function should return its structure value, + as a CORE_ADDR (or an expression that can be used as one). */ + +#define EXTRACT_STRUCT_VALUE_ADDRESS(REGBUF) (*(CORE_ADDR *)(REGBUF)) + + +/* Define other aspects of the stack frame. + we keep a copy of the worked out return pc lying around, since it + is a useful bit of info */ + +#define EXTRA_FRAME_INFO \ + int frame_reg; \ + CORE_ADDR return_pc; \ + CORE_ADDR dummy; \ + int frameless; \ + int size; + +/* There's a mess in stack frame creation. See comments in blockframe.c + near reference to INIT_FRAME_PC_FIRST. */ + +#define INIT_FRAME_PC(fromleaf, prev) /* nada */ + +#define INIT_FRAME_PC_FIRST(fromleaf, prev) \ + (prev)->pc = ((fromleaf) ? SAVED_PC_AFTER_CALL ((prev)->next) : \ + (prev)->next ? FRAME_SAVED_PC ((prev)->next) : read_pc ()); + +#define INIT_EXTRA_FRAME_INFO(fromleaf, fi) \ + m68hc11_init_extra_frame_info (fromleaf, fi) + +extern void m68hc11_init_extra_frame_info (int fromleaf, + struct frame_info * fi); + +/* A macro that tells us whether the function invocation represented + by FI does not have a frame on the stack associated with it. If it + does not, FRAMELESS is set to 1, else 0. */ + +#define FRAMELESS_FUNCTION_INVOCATION(FI) \ + frameless_look_for_prologue (FI) + +#define FRAME_CHAIN(FRAME) m68hc11_frame_chain (FRAME) +#define FRAME_CHAIN_VALID(chain,frame) \ + ((chain) != 0 && (frame) != 0) +#define FRAME_SAVED_PC(FRAME) ((FRAME)->return_pc) +#define FRAME_ARGS_ADDRESS(fi) (fi)->frame +#define FRAME_LOCALS_ADDRESS(fi) (fi)->frame + +#define SAVED_PC_AFTER_CALL(frame) m68hc11_saved_pc_after_call (frame) + +/* Set VAL to the number of args passed to frame described by FI. + Can set VAL to -1, meaning no way to tell. */ +/* We can't tell how many args there are */ + +#define FRAME_NUM_ARGS(fi) (-1) + +/* Return number of bytes at start of arglist that are not really args. */ + +#define FRAME_ARGS_SKIP 0 + + +/* Put here the code to store, into a struct frame_saved_regs, + the addresses of the saved registers of frame described by FRAME_INFO. + This includes special registers such as pc and fp saved in special + ways in the stack frame. sp is even more special: + the address we return for it IS the sp for the next frame. */ + +#define FRAME_FIND_SAVED_REGS(frame_info, frame_saved_regs) \ + m68hc11_frame_find_saved_regs (frame_info, &(frame_saved_regs)) + +extern void m68hc11_frame_find_saved_regs (struct frame_info *, + struct frame_saved_regs *); + +#define CALL_DUMMY { 0 } +#define PUSH_DUMMY_FRAME +#define CALL_DUMMY_START_OFFSET 0 +#define CALL_DUMMY_BREAKPOINT_OFFSET (0) + +extern CORE_ADDR m68hc11_call_dummy_address (void); +#define CALL_DUMMY_ADDRESS() m68hc11_call_dummy_address () + +#define FIX_CALL_DUMMY(dummyname, pc, fun, nargs, args, type, gcc_p) \ +sp = m68hc11_fix_call_dummy (dummyname, pc, fun, nargs, args, type, gcc_p) + +extern CORE_ADDR m68hc11_fix_call_dummy (char *, CORE_ADDR, CORE_ADDR, + int, struct value **, + struct type *, int); +#define PUSH_ARGUMENTS(nargs, args, sp, struct_return, struct_addr) \ + sp = m68hc11_push_arguments ((nargs), (args), (sp), \ + (struct_return), (struct_addr)) +extern CORE_ADDR m68hc11_push_arguments (int, struct value **, + CORE_ADDR, int, CORE_ADDR); + + +/* Extract from an array REGBUF containing the (raw) register state + a function return value of type TYPE, and copy that, in virtual format, + into VALBUF. */ + +#define EXTRACT_RETURN_VALUE(TYPE,REGBUF,VALBUF) \ +m68hc11_extract_return_value(TYPE, REGBUF, VALBUF) +extern void m68hc11_extract_return_value (struct type *, char *, char *); + + +/* Discard from the stack the innermost frame, + restoring all saved registers. */ +#define POP_FRAME m68hc11_pop_frame(); +extern void m68hc11_pop_frame (void); + + +/* Number of bits in the appropriate type. */ + +#define TARGET_INT_BIT (2 * TARGET_CHAR_BIT) +#define TARGET_PTR_BIT (2 * TARGET_CHAR_BIT) +#define TARGET_DOUBLE_BIT (4 * TARGET_CHAR_BIT) +#define TARGET_LONG_DOUBLE_BIT (8 * TARGET_CHAR_BIT) + +#endif + +#include "defs.h" +#include "frame.h" +#include "obstack.h" +#include "symtab.h" +#include "gdbtypes.h" +#include "gdbcmd.h" +#include "gdbcore.h" +#include "gdb_string.h" +#include "value.h" +#include "inferior.h" +#include "dis-asm.h" +#include "symfile.h" +#include "objfiles.h" + +/* NOTE: This port is not finished. Several operations are not implemented + and will raise an error. Most of these functions concern the calling + of a function by GDB itself (command 'call') and retrieving data pushed + on the stack. */ + +void m68hc11_frame_find_saved_regs (struct frame_info *fi, + struct frame_saved_regs *fsr); +static void m68hc11_pop_dummy_frame (struct frame_info *fi); + +/* Table of registers for 68HC11. This includes the hard registers + and the pseudo hard registers used by GCC. */ +char* +m68hc11_register_names[] = +{ + "x", "d", "y", "sp", "pc", "a", "b", + "ccr", "z", "frame","tmp", "zs", "xy", + "ZD1", "ZD2", "ZD3", "ZD4", "ZD5", "ZD6", "ZD7", + "ZD8", "ZD9", "ZD10", "ZD11", "ZD12", "ZD13", "ZD14", + "ZD15", "ZD16", "ZD17", "ZD18", "ZD19", "ZD20", "ZD21", + "ZD22", "ZD23", "ZD24", "ZD25", "ZD26", "ZD27", "ZD28", + "ZD29", "ZD30", "ZD31", "ZD32" +}; + +static int reg_last = 32 * 2 + 6; +static int frame_index = 6; + +/* Raise an error for operations which are not yet provided. */ +static void +m68hc11_not_yet (const char *operation) +{ + error ("Operation '%s' is not yet implemented\n", operation); +} + +/* Immediately after a function call, return the saved pc before the frame + is setup. For sun3's, we check for the common case of being inside of a + system call, and if so, we know that Sun pushes the call # on the stack + prior to doing the trap. */ + +CORE_ADDR +m68hc11_saved_pc_after_call (struct frame_info *frame) +{ + unsigned addr = frame->frame + 1 + 2; + + addr = read_register (SP_REGNUM) + 1; + addr &= 0x0ffff; + return read_memory_integer (addr, 2) & 0x0FFFF; +} + +/* Discard from the stack the innermost frame, restoring all saved + registers. */ + +void +m68hc11_pop_frame () +{ + m68hc11_not_yet ("m68hc11_pop_frame"); +} + +/* Analyze the function prologue to find some information + about the function: + - the PC of the first line (for m68hc11_skip_prologue) + - the offset of the previous frame saved address (from current frame) + - the soft registers which are pushed. */ +static void +m68hc11_guess_from_prologue (CORE_ADDR pc, CORE_ADDR* first_line, + int* frame_offset, int* pushed_regs) +{ + CORE_ADDR func_end; + unsigned char op0, op1, op2; + int add_sp_mode; + int sp_adjust; + int size; + int found_frame_point; + int found_load; + CORE_ADDR first_pc; + int reg_saved; + + first_pc = get_pc_function_start (pc); + size = 0; + + if (first_pc == 0) + { + *frame_offset = 0; + *pushed_regs = 0; + *first_line = pc; + return; + } + +#define OP_PAGE2 (0x18) +#define OP_LDX (0xde) +#define OP_LDY (0xde) +#define OP_PSHX (0x3c) +#define OP_PSHY (0x3c) +#define OP_STS (0x9f) +#define OP_TSX (0x30) +#define OP_TSY (0x30) +#define OP_XGDX (0x8f) +#define OP_XGDY (0x8f) +#define OP_ADDD (0xc3) +#define OP_TXS (0x35) +#define OP_TYS (0x35) + + /* The 68hc11 stack is as follows: + + + | | + +-----------+ + | | + | args | + | | + +-----------+ + | PC-return | + +-----------+ + | Old frame | + +-----------+ + | | + | Locals | + | | + +-----------+ <--- current frame + | | + + With most processors (like 68K) the previous frame can be computed + easily because it is always at a fixed offset (see link/unlink). + That is, locals are accessed with negative offsets, arguments are + accessed with positive ones. Since 68hc11 only supports offsets + in the range [0..255], the frame is defined at the bottom of + locals (see picture). + + The purpose of the analysis made here is to find out the size + of locals in this function. An alternative to this is to use + DWARF2 info. This would be better but I don't know how to + access dwarf2 debug from this function. + + Walk from the function entry point to the point where we save + the frame. While walking instructions, compute the size of bytes + which are pushed. This gives us the index to access the previous + frame. + + We limit the search to 128 bytes so that the algorithm is bounded + in case of random and wrong code. We also stop and abort if + we find an instruction which is not supposed to appear in the + prologue (as generated by gcc 2.95, 2.96). + */ + pc = first_pc; + func_end = pc + 128; + add_sp_mode = 0; + found_frame_point = 0; + while (pc + 2 < func_end) + { + op0 = read_memory_unsigned_integer (pc, 1); + op1 = read_memory_unsigned_integer (pc + 1, 1); + op2 = read_memory_unsigned_integer (pc + 2, 1); + + /* ldx *frame */ + if (op0 == OP_LDX && op1 == frame_index) + { + pc += 2; + } + + /* ldy *frame */ + else if (op0 == OP_PAGE2 && op1 == OP_LDY && op2 == frame_index) + { + pc += 3; + } + + /* pshx */ + else if (op0 == OP_PSHX) + { + pc += 1; + size += 2; + } + + /* pshy */ + else if (op0 == OP_PAGE2 && op1 == OP_PSHX) + { + pc += 2; + size += 2; + } + + /* sts *frame */ + else if (op0 == OP_STS && op1 == frame_index) + { + found_frame_point = 1; + pc += 2; + break; + } + else if (op0 == OP_TSX && op1 == OP_XGDX) + { + add_sp_mode = 1; + pc += 2; + } + else if (op0 == OP_PAGE2 && op1 == OP_TSY && op2 == OP_PAGE2) + { + op0 = read_memory_unsigned_integer (pc + 3, 1); + if (op0 != OP_XGDY) + break; + + add_sp_mode = 2; + pc += 4; + } + else if (add_sp_mode && op0 == OP_ADDD) + { + sp_adjust = read_memory_unsigned_integer (pc + 1, 2); + if (sp_adjust & 0x8000) + sp_adjust |= 0xffff0000L; + + sp_adjust = -sp_adjust; + add_sp_mode |= 4; + pc += 3; + } + else if (add_sp_mode == (1 | 4) && op0 == OP_XGDX + && op1 == OP_TXS) + { + size += sp_adjust; + pc += 2; + add_sp_mode = 0; + } + else if (add_sp_mode == (2 | 4) && op0 == OP_PAGE2 + && op1 == OP_XGDY && op2 == OP_PAGE2) + { + op0 = read_memory_unsigned_integer (pc + 3, 1); + if (op0 != OP_TYS) + break; + + size += sp_adjust; + pc += 4; + add_sp_mode = 0; + } + else + { + break; + } + } + + if (found_frame_point == 0) + { + *frame_offset = 0; + } + else + { + *frame_offset = size; + } + + /* Now, look forward to see how many registers are pushed on the stack. + We look only for soft registers so there must be a first LDX *REG + before a PSHX. */ + reg_saved = 0; + found_load = 0; + while (pc + 2 < func_end) + { + op0 = read_memory_unsigned_integer (pc, 1); + op1 = read_memory_unsigned_integer (pc + 1, 1); + op2 = read_memory_unsigned_integer (pc + 2, 1); + if (op0 == OP_LDX && op1 > frame_index && op1 <= reg_last) + { + found_load = 1; + pc += 2; + } + else if (op0 == OP_PAGE2 && op1 == OP_LDY + && op2 > frame_index && op2 < reg_last) + { + found_load = 1; + pc += 3; + } + else if (op0 == OP_PSHX) + { + /* If there was no load, this is a push for a function call. */ + if (found_load == 0) + break; + + reg_saved += 2; + pc += 1; + found_load = 0; + } + else if (op0 == OP_PAGE2 && op1 == OP_PSHY) + { + if (found_load == 0) + break; + + reg_saved += 2; + pc += 2; + found_load = 0; + } + else + { + break; + } + } + *pushed_regs = reg_saved; + *first_line = pc; +} + + +CORE_ADDR +m68hc11_skip_prologue (CORE_ADDR pc) +{ + CORE_ADDR func_addr, func_end; + struct symtab_and_line sal; + int frame_offset; + int pushed_args; + + /* If we have line debugging information, then the end of the. */ + /* prologue should be the first assembly instruction of the + first source line. */ + if (find_pc_partial_function (pc, NULL, &func_addr, &func_end)) + { + sal = find_pc_line (func_addr, 0); + if (sal.end && sal.end < func_end) + return sal.end; + } + + m68hc11_guess_from_prologue (pc, &pc, &frame_offset, &pushed_args); + return pc; +} + +/* Given a GDB frame, determine the address of the calling function's frame. + This will be used to create a new GDB frame struct, and then + INIT_EXTRA_FRAME_INFO and INIT_FRAME_PC will be called for the new frame. +*/ + +CORE_ADDR +m68hc11_frame_chain (struct frame_info *frame) +{ + unsigned addr; + + if (frame->return_pc == 0 || inside_entry_file(frame->return_pc)) + return (CORE_ADDR)0; + + if (frame->frame == 0) + { + return (CORE_ADDR) 0; + } + + addr = frame->frame + frame->size + 1 - 2; + addr = read_memory_unsigned_integer (addr, 2) & 0x0FFFF; + if (addr == 0) + { + return (CORE_ADDR)0; + } + + return addr; +} + +/* Put here the code to store, into a struct frame_saved_regs, the + addresses of the saved registers of frame described by FRAME_INFO. + This includes special registers such as pc and fp saved in special + ways in the stack frame. sp is even more special: the address we + return for it IS the sp for the next frame. */ +void +m68hc11_frame_find_saved_regs (struct frame_info *fi, + struct frame_saved_regs *fsr) +{ + CORE_ADDR pc; + int saved; + + pc = fi->pc; + memset (fsr, 0, sizeof (*fsr)); + m68hc11_guess_from_prologue (pc, &pc, &fi->size, &saved); +} + +void +m68hc11_init_extra_frame_info (int fromleaf, struct frame_info *fi) +{ + unsigned addr; + struct frame_saved_regs dummy; + + m68hc11_frame_find_saved_regs (fi, &dummy); + + if (fromleaf) + { + fi->return_pc = m68hc11_saved_pc_after_call (fi); + } + else + { + addr = fi->frame + fi->size + 1; + fi->return_pc = read_memory_unsigned_integer (addr, 2) & 0x0ffff; + +#if 0 + printf ("Pc@0x%04x, FR 0x%04x, size %d, read ret @0x%04x -> 0x%04x\n", + fi->pc, + fi->frame, fi->size, + addr & 0x0ffff, + fi->return_pc); +#endif + } +} + +/* Same as 'info reg' but prints the registers in a different way. */ +static void +show_regs (char *args, int from_tty) +{ + int ccr = read_register (PSW_REGNUM); + int i; + + printf_filtered ("PC=%04x SP=%04x FP=%04x CCR=%02x %c%c%c%c%c%c%c%c\n", + read_register (PC_REGNUM), + read_register (SP_REGNUM), + read_register (FP_REGNUM), + ccr, + ccr & M6811_S_BIT ? 'S' : '-', + ccr & M6811_X_BIT ? 'X' : '-', + ccr & M6811_H_BIT ? 'H' : '-', + ccr & M6811_I_BIT ? 'I' : '-', + ccr & M6811_N_BIT ? 'N' : '-', + ccr & M6811_Z_BIT ? 'Z' : '-', + ccr & M6811_V_BIT ? 'V' : '-', + ccr & M6811_C_BIT ? 'C' : '-'); + + printf_filtered ("D=%04x IX=%04x IY=%04x\n", + read_register (D_REGNUM), + read_register (X_REGNUM), + read_register (Y_REGNUM)); + for (i = ZD1_REGNUM; i <= ZD32_REGNUM; i++) + { + printf_filtered ("ZD%d=%04x", + i - ZD1_REGNUM + 1, + read_register (i)); + if (((i - ZD1_REGNUM) % 8) == 7) + printf_filtered ("\n"); + else + printf_filtered (" "); + } +} + +CORE_ADDR +m68hc11_fix_call_dummy (char *dummyname, + CORE_ADDR start_sp, + CORE_ADDR fun, + int nargs, + value_ptr *args, + struct type *type, + int gcc_p) +{ + m68hc11_not_yet ("m68hc11_fix_call_dummy"); + return 0; +} + +static void +m68hc11_pop_dummy_frame (struct frame_info *fi) +{ + m68hc11_not_yet ("m68hc11_pop_dummy_frame"); +} + + +CORE_ADDR +m68hc11_push_arguments (int nargs, + value_ptr *args, + CORE_ADDR sp, + int struct_return, + CORE_ADDR struct_addr) +{ + m68hc11_not_yet ("m68hc11_push_arguments"); + return 0; +} + + +CORE_ADDR +m68hc11_call_dummy_address () +{ + m68hc11_not_yet ("m68hc11_call_dummy_address"); + return 0; +} + +/* Given a return value in `regbuf' with a type `valtype', + extract and copy its value into `valbuf'. */ + +void +m68hc11_extract_return_value (struct type *valtype, + char *regbuf, + char *valbuf) +{ + m68hc11_not_yet ("m68hc11_extract_return_value"); +} + +void +_initialize_m68hc11_tdep () +{ + tm_print_insn = print_insn_m68hc11; + + add_com ("regs", class_vars, show_regs, "Print all registers"); +} + |