diff options
| -rw-r--r-- | ChangeLog | 4 | ||||
| -rw-r--r-- | texinfo/texinfo.tex | 4288 |
2 files changed, 3328 insertions, 964 deletions
@@ -1,3 +1,7 @@ +2009-04-21 Joseph Myers <joseph@codesourcery.com> + + * texinfo/texinfo.tex: Update to version 2009-03-28.05. + 2009-04-17 Ben Elliston <bje@au.ibm.com> * config.sub, config.guess: Update from upstream sources. diff --git a/texinfo/texinfo.tex b/texinfo/texinfo.tex index 6f322ea..23a30bc 100644 --- a/texinfo/texinfo.tex +++ b/texinfo/texinfo.tex @@ -3,16 +3,16 @@ % Load plain if necessary, i.e., if running under initex. \expandafter\ifx\csname fmtname\endcsname\relax\input plain\fi % -\def\texinfoversion{2004-02-19.09} +\def\texinfoversion{2009-03-28.05} % -% Copyright (C) 1985, 1986, 1988, 1990, 1991, 1992, 1993, 1994, 1995, -% 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004 Free Software -% Foundation, Inc. +% Copyright 1985, 1986, 1988, 1990, 1991, 1992, 1993, 1994, 1995, +% 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, +% 2007, 2008, 2009 Free Software Foundation, Inc. % -% This texinfo.tex file is free software; you can redistribute it and/or +% This texinfo.tex file is free software: you can redistribute it and/or % modify it under the terms of the GNU General Public License as -% published by the Free Software Foundation; either version 2, or (at -% your option) any later version. +% published by the Free Software Foundation, either version 3 of the +% License, or (at your option) any later version. % % This texinfo.tex file is distributed in the hope that it will be % useful, but WITHOUT ANY WARRANTY; without even the implied warranty @@ -20,14 +20,12 @@ % General Public License for more details. % % You should have received a copy of the GNU General Public License -% along with this texinfo.tex file; see the file COPYING. If not, write -% to the Free Software Foundation, Inc., 59 Temple Place - Suite 330, -% Boston, MA 02111-1307, USA. +% along with this program. If not, see <http://www.gnu.org/licenses/>. % % As a special exception, when this file is read by TeX when processing % a Texinfo source document, you may use the result without % restriction. (This has been our intent since Texinfo was invented.) -% +% % Please try the latest version of texinfo.tex before submitting bug % reports; you can get the latest version from: % http://www.gnu.org/software/texinfo/ (the Texinfo home page), or @@ -55,7 +53,7 @@ % It is possible to adapt texinfo.tex for other languages, to some % extent. You can get the existing language-specific files from the % full Texinfo distribution. -% +% % The GNU Texinfo home page is http://www.gnu.org/software/texinfo. @@ -67,7 +65,7 @@ \everyjob{\message{[Texinfo version \texinfoversion]}% \catcode`+=\active \catcode`\_=\active} -\message{Basics,} + \chardef\other=12 % We never want plain's \outer definition of \+ in Texinfo. @@ -89,15 +87,20 @@ \let\ptexhat=^ \let\ptexi=\i \let\ptexindent=\indent -\let\ptexnoindent=\noindent \let\ptexinsert=\insert \let\ptexlbrace=\{ \let\ptexless=< +\let\ptexnewwrite\newwrite +\let\ptexnoindent=\noindent \let\ptexplus=+ \let\ptexrbrace=\} \let\ptexslash=\/ \let\ptexstar=\* \let\ptext=\t +\let\ptextop=\top +{\catcode`\'=\active +\global\let\ptexquoteright'}% Math-mode def from plain.tex. +\let\ptexraggedright=\raggedright % If this character appears in an error message or help string, it % starts a new line in the output. @@ -152,20 +155,22 @@ \ifx\putwordDefopt\undefined \gdef\putwordDefopt{User Option}\fi \ifx\putwordDeffunc\undefined \gdef\putwordDeffunc{Function}\fi -% In some macros, we cannot use the `\? notation---the left quote is -% in some cases the escape char. +% Since the category of space is not known, we have to be careful. +\chardef\spacecat = 10 +\def\spaceisspace{\catcode`\ =\spacecat} + +% sometimes characters are active, so we need control sequences. \chardef\colonChar = `\: \chardef\commaChar = `\, +\chardef\dashChar = `\- \chardef\dotChar = `\. \chardef\exclamChar= `\! +\chardef\lquoteChar= `\` \chardef\questChar = `\? +\chardef\rquoteChar= `\' \chardef\semiChar = `\; \chardef\underChar = `\_ -\chardef\spaceChar = `\ % -\chardef\spacecat = 10 -\def\spaceisspace{\catcode\spaceChar=\spacecat} - % Ignore a token. % \def\gobble#1{} @@ -175,10 +180,12 @@ % Hyphenation fixes. \hyphenation{ - Flor-i-da Ghost-script Ghost-view Mac-OS ap-pen-dix bit-map bit-maps + Flor-i-da Ghost-script Ghost-view Mac-OS Post-Script + ap-pen-dix bit-map bit-maps data-base data-bases eshell fall-ing half-way long-est man-u-script man-u-scripts mini-buf-fer mini-buf-fers over-view par-a-digm - par-a-digms rec-tan-gu-lar ro-bot-ics se-vere-ly set-up spa-ces + par-a-digms rath-er rec-tan-gu-lar ro-bot-ics se-vere-ly set-up spa-ces + spell-ing spell-ings stand-alone strong-est time-stamp time-stamps which-ever white-space wide-spread wrap-around } @@ -274,6 +281,50 @@ \newdimen\cornerthick \cornerthick=.3pt \newdimen\topandbottommargin \topandbottommargin=.75in +% Output a mark which sets \thischapter, \thissection and \thiscolor. +% We dump everything together because we only have one kind of mark. +% This works because we only use \botmark / \topmark, not \firstmark. +% +% A mark contains a subexpression of the \ifcase ... \fi construct. +% \get*marks macros below extract the needed part using \ifcase. +% +% Another complication is to let the user choose whether \thischapter +% (\thissection) refers to the chapter (section) in effect at the top +% of a page, or that at the bottom of a page. The solution is +% described on page 260 of The TeXbook. It involves outputting two +% marks for the sectioning macros, one before the section break, and +% one after. I won't pretend I can describe this better than DEK... +\def\domark{% + \toks0=\expandafter{\lastchapterdefs}% + \toks2=\expandafter{\lastsectiondefs}% + \toks4=\expandafter{\prevchapterdefs}% + \toks6=\expandafter{\prevsectiondefs}% + \toks8=\expandafter{\lastcolordefs}% + \mark{% + \the\toks0 \the\toks2 + \noexpand\or \the\toks4 \the\toks6 + \noexpand\else \the\toks8 + }% +} +% \topmark doesn't work for the very first chapter (after the title +% page or the contents), so we use \firstmark there -- this gets us +% the mark with the chapter defs, unless the user sneaks in, e.g., +% @setcolor (or @url, or @link, etc.) between @contents and the very +% first @chapter. +\def\gettopheadingmarks{% + \ifcase0\topmark\fi + \ifx\thischapter\empty \ifcase0\firstmark\fi \fi +} +\def\getbottomheadingmarks{\ifcase1\botmark\fi} +\def\getcolormarks{\ifcase2\topmark\fi} + +% Avoid "undefined control sequence" errors. +\def\lastchapterdefs{} +\def\lastsectiondefs{} +\def\prevchapterdefs{} +\def\prevsectiondefs{} +\def\lastcolordefs{} + % Main output routine. \chardef\PAGE = 255 \output = {\onepageout{\pagecontents\PAGE}} @@ -291,7 +342,9 @@ % % Do this outside of the \shipout so @code etc. will be expanded in % the headline as they should be, not taken literally (outputting ''code). + \ifodd\pageno \getoddheadingmarks \else \getevenheadingmarks \fi \setbox\headlinebox = \vbox{\let\hsize=\pagewidth \makeheadline}% + \ifodd\pageno \getoddfootingmarks \else \getevenfootingmarks \fi \setbox\footlinebox = \vbox{\let\hsize=\pagewidth \makefootline}% % {% @@ -299,10 +352,14 @@ % take effect in \write's, yet the group defined by the \vbox ends % before the \shipout runs. % - \escapechar = `\\ % use backslash in output files. \indexdummies % don't expand commands in the output. \normalturnoffactive % \ in index entries must not stay \, e.g., if - % the page break happens to be in the middle of an example. + % the page break happens to be in the middle of an example. + % We don't want .vr (or whatever) entries like this: + % \entry{{\tt \indexbackslash }acronym}{32}{\code {\acronym}} + % "\acronym" won't work when it's read back in; + % it needs to be + % {\code {{\tt \backslashcurfont }acronym} \shipout\vbox{% % Do this early so pdf references go to the beginning of the page. \ifpdfmakepagedest \pdfdest name{\the\pageno} xyz\fi @@ -330,9 +387,9 @@ \pagebody{#1}% \ifdim\ht\footlinebox > 0pt % Only leave this space if the footline is nonempty. - % (We lessened \vsize for it in \oddfootingxxx.) + % (We lessened \vsize for it in \oddfootingyyy.) % The \baselineskip=24pt in plain's \makefootline has no effect. - \vskip 2\baselineskip + \vskip 24pt \unvbox\footlinebox \fi % @@ -353,7 +410,7 @@ \egroup % \vbox from first cropmarks clause \fi }% end of \shipout\vbox - }% end of group with \normalturnoffactive + }% end of group with \indexdummies \advancepageno \ifnum\outputpenalty>-20000 \else\dosupereject\fi } @@ -366,7 +423,7 @@ % marginal hacks, juha@viisa.uucp (Juha Takala) \ifvoid\margin\else % marginal info is present \rlap{\kern\hsize\vbox to\z@{\kern1pt\box\margin \vss}}\fi -\dimen@=\dp#1 \unvbox#1 +\dimen@=\dp#1\relax \unvbox#1\relax \ifvoid\footins\else\vskip\skip\footins\footnoterule \unvbox\footins\fi \ifr@ggedbottom \kern-\dimen@ \vfil \fi} } @@ -388,7 +445,7 @@ % \def\parsearg{\parseargusing{}} \def\parseargusing#1#2{% - \def\next{#2}% + \def\argtorun{#2}% \begingroup \obeylines \spaceisspace @@ -407,7 +464,7 @@ \def\argremovecomment#1\comment#2\ArgTerm{\argremovec #1\c\ArgTerm} \def\argremovec#1\c#2\ArgTerm{\argcheckspaces#1\^^M\ArgTerm} -% Each occurence of `\^^M' or `<space>\^^M' is replaced by a single space. +% Each occurrence of `\^^M' or `<space>\^^M' is replaced by a single space. % % \argremovec might leave us with trailing space, e.g., % @end itemize @c foo @@ -419,8 +476,7 @@ \def\argcheckspacesY#1\^^M#2\^^M#3\ArgTerm{% \def\temp{#3}% \ifx\temp\empty - % We cannot use \next here, as it holds the macro to run; - % thus we reuse \temp. + % Do not use \next, perhaps the caller of \parsearg uses it; reuse \temp: \let\temp\finishparsearg \else \let\temp\argcheckspaces @@ -432,14 +488,14 @@ % If a _delimited_ argument is enclosed in braces, they get stripped; so % to get _exactly_ the rest of the line, we had to prevent such situation. % We prepended an \empty token at the very beginning and we expand it now, -% just before passing the control to \next. -% (Similarily, we have to think about #3 of \argcheckspacesY above: it is +% just before passing the control to \argtorun. +% (Similarly, we have to think about #3 of \argcheckspacesY above: it is % either the null string, or it ends with \^^M---thus there is no danger % that a pair of braces would be stripped. % % But first, we have to remove the trailing space token. % -\def\finishparsearg#1 \ArgTerm{\expandafter\next\expandafter{#1}} +\def\finishparsearg#1 \ArgTerm{\expandafter\argtorun\expandafter{#1}} % \parseargdef\foo{...} % is roughly equivalent to @@ -479,23 +535,23 @@ \def\flushcr{\ifx\par\lisppar \def\next##1{}\else \let\next=\relax \fi \next} % Define the framework for environments in texinfo.tex. It's used like this: -% +% % \envdef\foo{...} % \def\Efoo{...} -% +% % It's the responsibility of \envdef to insert \begingroup before the % actual body; @end closes the group after calling \Efoo. \envdef also % defines \thisenv, so the current environment is known; @end checks % whether the environment name matches. The \checkenv macro can also be % used to check whether the current environment is the one expected. -% +% % Non-false conditionals (@iftex, @ifset) don't fit into this, so they -% are not treated as enviroments; they don't open a group. (The +% are not treated as environments; they don't open a group. (The % implementation of @end takes care not to call \endgroup in this % special case.) -% At runtime, environments start with this: +% At run-time, environments start with this: \def\startenvironment#1{\begingroup\def\thisenv{#1}} % initialize \let\thisenv\empty @@ -513,7 +569,7 @@ \fi } -% Evironment mismatch, #1 expected: +% Environment mismatch, #1 expected: \def\badenverr{% \errhelp = \EMsimple \errmessage{This command can appear only \inenvironment\temp, @@ -563,7 +619,7 @@ \let\}=\myrbrace \begingroup % Definitions to produce \{ and \} commands for indices, - % and @{ and @} for the aux file. + % and @{ and @} for the aux/toc files. \catcode`\{ = \other \catcode`\} = \other \catcode`\[ = 1 \catcode`\] = 2 \catcode`\! = 0 \catcode`\\ = \other @@ -597,23 +653,23 @@ \def\jmacro{j} \def\dotless#1{% \def\temp{#1}% - \ifx\temp\imacro \ptexi - \else\ifx\temp\jmacro \j + \ifx\temp\imacro \ifmmode\imath \else\ptexi \fi + \else\ifx\temp\jmacro \ifmmode\jmath \else\j \fi \else \errmessage{@dotless can be used only with i or j}% \fi\fi } % The \TeX{} logo, as in plain, but resetting the spacing so that a % period following counts as ending a sentence. (Idea found in latex.) -% -\edef\TeX{\TeX \spacefactor=3000 } +% +\edef\TeX{\TeX \spacefactor=1000 } % @LaTeX{} logo. Not quite the same results as the definition in % latex.ltx, since we use a different font for the raised A; it's most % convenient for us to use an explicitly smaller font, rather than using % the \scriptstyle font (since we don't reset \scriptstyle and % \scriptscriptstyle). -% +% \def\LaTeX{% L\kern-.36em {\setbox0=\hbox{T}% @@ -644,13 +700,28 @@ \let\/=\allowbreak % @. is an end-of-sentence period. -\def\.{.\spacefactor=3000 } +\def\.{.\spacefactor=\endofsentencespacefactor\space} % @! is an end-of-sentence bang. -\def\!{!\spacefactor=3000 } +\def\!{!\spacefactor=\endofsentencespacefactor\space} % @? is an end-of-sentence query. -\def\?{?\spacefactor=3000 } +\def\?{?\spacefactor=\endofsentencespacefactor\space} + +% @frenchspacing on|off says whether to put extra space after punctuation. +% +\def\onword{on} +\def\offword{off} +% +\parseargdef\frenchspacing{% + \def\temp{#1}% + \ifx\temp\onword \plainfrenchspacing + \else\ifx\temp\offword \plainnonfrenchspacing + \else + \errhelp = \EMsimple + \errmessage{Unknown @frenchspacing option `\temp', must be on/off}% + \fi\fi +} % @w prevents a word break. Without the \leavevmode, @w at the % beginning of a paragraph, when TeX is still in vertical mode, would @@ -849,15 +920,20 @@ where each line of input produces a line of output.} \temp } -% @include file insert text of that file as input. +% @include FILE -- \input text of FILE. % \def\include{\parseargusing\filenamecatcodes\includezzz} \def\includezzz#1{% \pushthisfilestack \def\thisfile{#1}% {% - \makevalueexpandable - \def\temp{\input #1 }% + \makevalueexpandable % we want to expand any @value in FILE. + \turnoffactive % and allow special characters in the expansion + \indexnofonts % Allow `@@' and other weird things in file names. + \edef\temp{\noexpand\input #1 }% + % + % This trickery is to read FILE outside of a group, in case it makes + % definitions, etc. \expandafter }\temp \popthisfilestack @@ -872,6 +948,8 @@ where each line of input produces a line of output.} \catcode`>=\other \catcode`+=\other \catcode`-=\other + \catcode`\`=\other + \catcode`\'=\other } \def\pushthisfilestack{% @@ -1028,9 +1106,9 @@ where each line of input produces a line of output.} % _ active, and distinguish by seeing if the current family is \slfam, % which is what @var uses. { - \catcode\underChar = \active + \catcode`\_ = \active \gdef\mathunderscore{% - \catcode\underChar=\active + \catcode`\_=\active \def_{\ifnum\fam=\slfam \_\else\sb\fi}% } } @@ -1047,6 +1125,16 @@ where each line of input produces a line of output.} \mathunderscore \let\\ = \mathbackslash \mathactive + % make the texinfo accent commands work in math mode + \let\"=\ddot + \let\'=\acute + \let\==\bar + \let\^=\hat + \let\`=\grave + \let\u=\breve + \let\v=\check + \let\~=\tilde + \let\dotaccent=\dot $\finishmath } \def\finishmath#1{#1$\endgroup} % Close the group opened by \tex. @@ -1060,28 +1148,41 @@ where each line of input produces a line of output.} \catcode`< = \active \catcode`> = \active \catcode`+ = \active + \catcode`' = \active \gdef\mathactive{% \let^ = \ptexhat \let< = \ptexless \let> = \ptexgtr \let+ = \ptexplus + \let' = \ptexquoteright } } -% @bullet and @minus need the same treatment as @math, just above. +% Some math mode symbols. \def\bullet{$\ptexbullet$} -\def\minus{$-$} +\def\geq{\ifmmode \ge\else $\ge$\fi} +\def\leq{\ifmmode \le\else $\le$\fi} +\def\minus{\ifmmode -\else $-$\fi} % @dots{} outputs an ellipsis using the current font. -% We do .5em per period so that it has the same spacing in a typewriter -% font as three actual period characters. +% We do .5em per period so that it has the same spacing in the cm +% typewriter fonts as three actual period characters; on the other hand, +% in other typewriter fonts three periods are wider than 1.5em. So do +% whichever is larger. % \def\dots{% \leavevmode - \hbox to 1.5em{% - \hskip 0pt plus 0.25fil - .\hfil.\hfil.% - \hskip 0pt plus 0.5fil + \setbox0=\hbox{...}% get width of three periods + \ifdim\wd0 > 1.5em + \dimen0 = \wd0 + \else + \dimen0 = 1.5em + \fi + \hbox to \dimen0{% + \hskip 0pt plus.25fil + .\hskip 0pt plus1fil + .\hskip 0pt plus1fil + .\hskip 0pt plus.5fil }% } @@ -1089,12 +1190,12 @@ where each line of input produces a line of output.} % \def\enddots{% \dots - \spacefactor=3000 + \spacefactor=\endofsentencespacefactor } % @comma{} is so commas can be inserted into text without messing up % Texinfo's parsing. -% +% \let\comma = , % @refill is a no-op. @@ -1160,48 +1261,192 @@ where each line of input produces a line of output.} \newif\ifpdf \newif\ifpdfmakepagedest +% when pdftex is run in dvi mode, \pdfoutput is defined (so \pdfoutput=1 +% can be set). So we test for \relax and 0 as well as \undefined, +% borrowed from ifpdf.sty. \ifx\pdfoutput\undefined - \pdffalse - \let\pdfmkdest = \gobble - \let\pdfurl = \gobble - \let\endlink = \relax - \let\linkcolor = \relax - \let\pdfmakeoutlines = \relax \else - \pdftrue - \pdfoutput = 1 - \input pdfcolor - \pdfcatalog{/PageMode /UseOutlines}% + \ifx\pdfoutput\relax + \else + \ifcase\pdfoutput + \else + \pdftrue + \fi + \fi +\fi + +% PDF uses PostScript string constants for the names of xref targets, +% for display in the outlines, and in other places. Thus, we have to +% double any backslashes. Otherwise, a name like "\node" will be +% interpreted as a newline (\n), followed by o, d, e. Not good. +% http://www.ntg.nl/pipermail/ntg-pdftex/2004-July/000654.html +% (and related messages, the final outcome is that it is up to the TeX +% user to double the backslashes and otherwise make the string valid, so +% that's what we do). + +% double active backslashes. +% +{\catcode`\@=0 \catcode`\\=\active + @gdef@activebackslashdouble{% + @catcode`@\=@active + @let\=@doublebackslash} +} + +% To handle parens, we must adopt a different approach, since parens are +% not active characters. hyperref.dtx (which has the same problem as +% us) handles it with this amazing macro to replace tokens, with minor +% changes for Texinfo. It is included here under the GPL by permission +% from the author, Heiko Oberdiek. +% +% #1 is the tokens to replace. +% #2 is the replacement. +% #3 is the control sequence with the string. +% +\def\HyPsdSubst#1#2#3{% + \def\HyPsdReplace##1#1##2\END{% + ##1% + \ifx\\##2\\% + \else + #2% + \HyReturnAfterFi{% + \HyPsdReplace##2\END + }% + \fi + }% + \xdef#3{\expandafter\HyPsdReplace#3#1\END}% +} +\long\def\HyReturnAfterFi#1\fi{\fi#1} + +% #1 is a control sequence in which to do the replacements. +\def\backslashparens#1{% + \xdef#1{#1}% redefine it as its expansion; the definition is simply + % \lastnode when called from \setref -> \pdfmkdest. + \HyPsdSubst{(}{\realbackslash(}{#1}% + \HyPsdSubst{)}{\realbackslash)}{#1}% +} + +\newhelp\nopdfimagehelp{Texinfo supports .png, .jpg, .jpeg, and .pdf images +with PDF output, and none of those formats could be found. (.eps cannot +be supported due to the design of the PDF format; use regular TeX (DVI +output) for that.)} + +\ifpdf + % + % Color manipulation macros based on pdfcolor.tex. + \def\cmykDarkRed{0.28 1 1 0.35} + \def\cmykBlack{0 0 0 1} + % + % k sets the color for filling (usual text, etc.); + % K sets the color for stroking (thin rules, e.g., normal _'s). + \def\pdfsetcolor#1{\pdfliteral{#1 k #1 K}} + % + % Set color, and create a mark which defines \thiscolor accordingly, + % so that \makeheadline knows which color to restore. + \def\setcolor#1{% + \xdef\lastcolordefs{\gdef\noexpand\thiscolor{#1}}% + \domark + \pdfsetcolor{#1}% + } + % + \def\maincolor{\cmykBlack} + \pdfsetcolor{\maincolor} + \edef\thiscolor{\maincolor} + \def\lastcolordefs{} + % + \def\makefootline{% + \baselineskip24pt + \line{\pdfsetcolor{\maincolor}\the\footline}% + } + % + \def\makeheadline{% + \vbox to 0pt{% + \vskip-22.5pt + \line{% + \vbox to8.5pt{}% + % Extract \thiscolor definition from the marks. + \getcolormarks + % Typeset the headline with \maincolor, then restore the color. + \pdfsetcolor{\maincolor}\the\headline\pdfsetcolor{\thiscolor}% + }% + \vss + }% + \nointerlineskip + } + % + % + \pdfcatalog{/PageMode /UseOutlines} + % + % #1 is image name, #2 width (might be empty/whitespace), #3 height (ditto). \def\dopdfimage#1#2#3{% - \def\imagewidth{#2}% - \def\imageheight{#3}% - % without \immediate, pdftex seg faults when the same image is + \def\imagewidth{#2}\setbox0 = \hbox{\ignorespaces #2}% + \def\imageheight{#3}\setbox2 = \hbox{\ignorespaces #3}% + % + % pdftex (and the PDF format) support .png, .jpg, .pdf (among + % others). Let's try in that order. + \let\pdfimgext=\empty + \begingroup + \openin 1 #1.png \ifeof 1 + \openin 1 #1.jpg \ifeof 1 + \openin 1 #1.jpeg \ifeof 1 + \openin 1 #1.JPG \ifeof 1 + \openin 1 #1.pdf \ifeof 1 + \openin 1 #1.PDF \ifeof 1 + \errhelp = \nopdfimagehelp + \errmessage{Could not find image file #1 for pdf}% + \else \gdef\pdfimgext{PDF}% + \fi + \else \gdef\pdfimgext{pdf}% + \fi + \else \gdef\pdfimgext{JPG}% + \fi + \else \gdef\pdfimgext{jpeg}% + \fi + \else \gdef\pdfimgext{jpg}% + \fi + \else \gdef\pdfimgext{png}% + \fi + \closein 1 + \endgroup + % + % without \immediate, ancient pdftex seg faults when the same image is % included twice. (Version 3.14159-pre-1.0-unofficial-20010704.) \ifnum\pdftexversion < 14 \immediate\pdfimage \else \immediate\pdfximage \fi - \ifx\empty\imagewidth\else width \imagewidth \fi - \ifx\empty\imageheight\else height \imageheight \fi + \ifdim \wd0 >0pt width \imagewidth \fi + \ifdim \wd2 >0pt height \imageheight \fi \ifnum\pdftexversion<13 - #1.pdf% + #1.\pdfimgext \else - {#1.pdf}% + {#1.\pdfimgext}% \fi \ifnum\pdftexversion < 14 \else \pdfrefximage \pdflastximage \fi} + % \def\pdfmkdest#1{{% - % We have to set dummies so commands such as @code in a section title - % aren't expanded. - \atdummies - \normalturnoffactive - \pdfdest name{#1} xyz% + % We have to set dummies so commands such as @code, and characters + % such as \, aren't expanded when present in a section title. + \indexnofonts + \turnoffactive + \activebackslashdouble + \makevalueexpandable + \def\pdfdestname{#1}% + \backslashparens\pdfdestname + \safewhatsit{\pdfdest name{\pdfdestname} xyz}% }} + % + % used to mark target names; must be expandable. \def\pdfmkpgn#1{#1} - \let\linkcolor = \Blue % was Cyan, but that seems light? - \def\endlink{\Black\pdfendlink} + % + % by default, use a color that is dark enough to print on paper as + % nearly black, but still distinguishable for online viewing. + \def\urlcolor{\cmykDarkRed} + \def\linkcolor{\cmykDarkRed} + \def\endlink{\setcolor{\maincolor}\pdfendlink} + % % Adding outlines to PDF; macros for calculating structure of outlines % come from Petr Olsak \def\expnumber#1{\expandafter\ifx\csname#1\endcsname\relax 0% @@ -1210,20 +1455,31 @@ where each line of input produces a line of output.} \advance\tempnum by 1 \expandafter\xdef\csname#1\endcsname{\the\tempnum}} % - % #1 is the section text. #2 is the pdf expression for the number - % of subentries (or empty, for subsubsections). #3 is the node - % text, which might be empty if this toc entry had no - % corresponding node. #4 is the page number. - % + % #1 is the section text, which is what will be displayed in the + % outline by the pdf viewer. #2 is the pdf expression for the number + % of subentries (or empty, for subsubsections). #3 is the node text, + % which might be empty if this toc entry had no corresponding node. + % #4 is the page number + % \def\dopdfoutline#1#2#3#4{% % Generate a link to the node text if that exists; else, use the % page number. We could generate a destination for the section % text in the case where a section has no node, but it doesn't - % seem worthwhile, since most documents are normally structured. + % seem worth the trouble, since most documents are normally structured. \def\pdfoutlinedest{#3}% - \ifx\pdfoutlinedest\empty \def\pdfoutlinedest{#4}\fi + \ifx\pdfoutlinedest\empty + \def\pdfoutlinedest{#4}% + \else + % Doubled backslashes in the name. + {\activebackslashdouble \xdef\pdfoutlinedest{#3}% + \backslashparens\pdfoutlinedest}% + \fi + % + % Also double the backslashes in the display string. + {\activebackslashdouble \xdef\pdfoutlinetext{#1}% + \backslashparens\pdfoutlinetext}% % - \pdfoutline goto name{\pdfmkpgn{\pdfoutlinedest}}#2{#1}% + \pdfoutline goto name{\pdfmkpgn{\pdfoutlinedest}}#2{\pdfoutlinetext}% } % \def\pdfmakeoutlines{% @@ -1235,13 +1491,13 @@ where each line of input produces a line of output.} % Read toc silently, to get counts of subentries for \pdfoutline. \def\numchapentry##1##2##3##4{% \def\thischapnum{##2}% - \let\thissecnum\empty - \let\thissubsecnum\empty + \def\thissecnum{0}% + \def\thissubsecnum{0}% }% \def\numsecentry##1##2##3##4{% \advancenumber{chap\thischapnum}% \def\thissecnum{##2}% - \let\thissubsecnum\empty + \def\thissubsecnum{0}% }% \def\numsubsecentry##1##2##3##4{% \advancenumber{sec\thissecnum}% @@ -1250,9 +1506,9 @@ where each line of input produces a line of output.} \def\numsubsubsecentry##1##2##3##4{% \advancenumber{subsec\thissubsecnum}% }% - \let\thischapnum\empty - \let\thissecnum\empty - \let\thissubsecnum\empty + \def\thischapnum{0}% + \def\thissecnum{0}% + \def\thissubsecnum{0}% % % use \def rather than \let here because we redefine \chapentry et % al. a second time, below. @@ -1264,12 +1520,12 @@ where each line of input produces a line of output.} \def\unnsecentry{\numsecentry}% \def\unnsubsecentry{\numsubsecentry}% \def\unnsubsubsecentry{\numsubsubsecentry}% - \input \jobname.toc + \readdatafile{toc}% % % Read toc second time, this time actually producing the outlines. % The `-' means take the \expnumber as the absolute number of % subentries, which we calculated on our first read of the .toc above. - % + % % We use the node names as the destinations. \def\numchapentry##1##2##3##4{% \dopdfoutline{##1}{count-\expnumber{chap##2}}{##3}{##4}}% @@ -1285,46 +1541,17 @@ where each line of input produces a line of output.} % since the encoding is unknown. For example, the eogonek from % Latin 2 (0xea) gets translated to a | character. Info from % Staszek Wawrykiewicz, 19 Jan 2004 04:09:24 +0100. - % + % % xx to do this right, we have to translate 8-bit characters to % their "best" equivalent, based on the @documentencoding. Right % now, I guess we'll just let the pdf reader have its way. \indexnofonts - \turnoffactive - \input \jobname.toc + \setupdatafile + \catcode`\\=\active \otherbackslash + \input \tocreadfilename \endgroup } % - \def\makelinks #1,{% - \def\params{#1}\def\E{END}% - \ifx\params\E - \let\nextmakelinks=\relax - \else - \let\nextmakelinks=\makelinks - \ifnum\lnkcount>0,\fi - \picknum{#1}% - \startlink attr{/Border [0 0 0]} - goto name{\pdfmkpgn{\the\pgn}}% - \linkcolor #1% - \advance\lnkcount by 1% - \endlink - \fi - \nextmakelinks - } - \def\picknum#1{\expandafter\pn#1} - \def\pn#1{% - \def\p{#1}% - \ifx\p\lbrace - \let\nextpn=\ppn - \else - \let\nextpn=\ppnn - \def\first{#1} - \fi - \nextpn - } - \def\ppn#1{\pgn=#1\gobble} - \def\ppnn{\pgn=\first} - \def\pdfmklnk#1{\lnkcount=0\makelinks #1,END,} \def\skipspaces#1{\def\PP{#1}\def\D{|}% \ifx\PP\D\let\nextsp\relax \else\let\nextsp\skipspaces @@ -1339,11 +1566,23 @@ where each line of input produces a line of output.} \else \let \startlink \pdfstartlink \fi + % make a live url in pdf output. \def\pdfurl#1{% \begingroup - \normalturnoffactive\def\@{@}% + % it seems we really need yet another set of dummies; have not + % tried to figure out what each command should do in the context + % of @url. for now, just make @/ a no-op, that's the only one + % people have actually reported a problem with. + % + \normalturnoffactive + \def\@{@}% + \let\/=\empty \makevalueexpandable - \leavevmode\Red + % do we want to go so far as to use \indexnofonts instead of just + % special-casing \var here? + \def\var##1{##1}% + % + \leavevmode\setcolor{\urlcolor}% \startlink attr{/Border [0 0 0]}% user{/Subtype /Link /A << /S /URI /URI (#1) >>}% \endgroup} @@ -1370,9 +1609,17 @@ where each line of input produces a line of output.} {\noexpand\pdflink{\the\toksC}}\toksC={}\global\countA=0} \def\pdflink#1{% \startlink attr{/Border [0 0 0]} goto name{\pdfmkpgn{#1}} - \linkcolor #1\endlink} + \setcolor{\linkcolor}#1\endlink} \def\done{\edef\st{\global\noexpand\toksA={\the\toksB}}\st} -\fi % \ifx\pdfoutput +\else + % non-pdf mode + \let\pdfmkdest = \gobble + \let\pdfurl = \gobble + \let\endlink = \relax + \let\setcolor = \gobble + \let\pdfsetcolor = \gobble + \let\pdfmakeoutlines = \relax +\fi % \ifx\pdfoutput \message{fonts,} @@ -1380,22 +1627,26 @@ where each line of input produces a line of output.} % Change the current font style to #1, remembering it in \curfontstyle. % For now, we do not accumulate font styles: @b{@i{foo}} prints foo in % italics, not bold italics. -% +% \def\setfontstyle#1{% \def\curfontstyle{#1}% not as a control sequence, because we are \edef'd. \csname ten#1\endcsname % change the current font } % Select #1 fonts with the current style. -% +% \def\selectfonts#1{\csname #1fonts\endcsname \csname\curfontstyle\endcsname} \def\rm{\fam=0 \setfontstyle{rm}} \def\it{\fam=\itfam \setfontstyle{it}} \def\sl{\fam=\slfam \setfontstyle{sl}} -\def\bf{\fam=\bffam \setfontstyle{bf}} +\def\bf{\fam=\bffam \setfontstyle{bf}}\def\bfstylename{bf} \def\tt{\fam=\ttfam \setfontstyle{tt}} +% Unfortunately, we have to override this for titles and the like, since +% in those cases "rm" is bold. Sigh. +\def\rmisbold{\rm\def\curfontstyle{bf}} + % Texinfo sort of supports the sans serif font style, which plain TeX does not. % So we set up a \sf. \newfam\sffam @@ -1405,6 +1656,7 @@ where each line of input produces a line of output.} % We don't need math for this font style. \def\ttsl{\setfontstyle{ttsl}} + % Default leading. \newdimen\textleading \textleading = 13.2pt @@ -1416,8 +1668,12 @@ where each line of input produces a line of output.} \def\strutheightpercent{.70833} \def\strutdepthpercent {.29167} % +% can get a sort of poor man's double spacing by redefining this. +\def\baselinefactor{1} +% \def\setleading#1{% - \normalbaselineskip = #1\relax + \dimen0 = #1\relax + \normalbaselineskip = \baselinefactor\dimen0 \normallineskip = \lineskipfactor\normalbaselineskip \normalbaselines \setbox\strutbox =\hbox{% @@ -1426,10 +1682,279 @@ where each line of input produces a line of output.} }% } +% PDF CMaps. See also LaTeX's t1.cmap. +% +% do nothing with this by default. +\expandafter\let\csname cmapOT1\endcsname\gobble +\expandafter\let\csname cmapOT1IT\endcsname\gobble +\expandafter\let\csname cmapOT1TT\endcsname\gobble + +% if we are producing pdf, and we have \pdffontattr, then define cmaps. +% (\pdffontattr was introduced many years ago, but people still run +% older pdftex's; it's easy to conditionalize, so we do.) +\ifpdf \ifx\pdffontattr\undefined \else + \begingroup + \catcode`\^^M=\active \def^^M{^^J}% Output line endings as the ^^J char. + \catcode`\%=12 \immediate\pdfobj stream {%!PS-Adobe-3.0 Resource-CMap +%%DocumentNeededResources: ProcSet (CIDInit) +%%IncludeResource: ProcSet (CIDInit) +%%BeginResource: CMap (TeX-OT1-0) +%%Title: (TeX-OT1-0 TeX OT1 0) +%%Version: 1.000 +%%EndComments +/CIDInit /ProcSet findresource begin +12 dict begin +begincmap +/CIDSystemInfo +<< /Registry (TeX) +/Ordering (OT1) +/Supplement 0 +>> def +/CMapName /TeX-OT1-0 def +/CMapType 2 def +1 begincodespacerange +<00> <7F> +endcodespacerange +8 beginbfrange +<00> <01> <0393> +<09> <0A> <03A8> +<23> <26> <0023> +<28> <3B> <0028> +<3F> <5B> <003F> +<5D> <5E> <005D> +<61> <7A> <0061> +<7B> <7C> <2013> +endbfrange +40 beginbfchar +<02> <0398> +<03> <039B> +<04> <039E> +<05> <03A0> +<06> <03A3> +<07> <03D2> +<08> <03A6> +<0B> <00660066> +<0C> <00660069> +<0D> <0066006C> +<0E> <006600660069> +<0F> <00660066006C> +<10> <0131> +<11> <0237> +<12> <0060> +<13> <00B4> +<14> <02C7> +<15> <02D8> +<16> <00AF> +<17> <02DA> +<18> <00B8> +<19> <00DF> +<1A> <00E6> +<1B> <0153> +<1C> <00F8> +<1D> <00C6> +<1E> <0152> +<1F> <00D8> +<21> <0021> +<22> <201D> +<27> <2019> +<3C> <00A1> +<3D> <003D> +<3E> <00BF> +<5C> <201C> +<5F> <02D9> +<60> <2018> +<7D> <02DD> +<7E> <007E> +<7F> <00A8> +endbfchar +endcmap +CMapName currentdict /CMap defineresource pop +end +end +%%EndResource +%%EOF + }\endgroup + \expandafter\edef\csname cmapOT1\endcsname#1{% + \pdffontattr#1{/ToUnicode \the\pdflastobj\space 0 R}% + }% +% +% \cmapOT1IT + \begingroup + \catcode`\^^M=\active \def^^M{^^J}% Output line endings as the ^^J char. + \catcode`\%=12 \immediate\pdfobj stream {%!PS-Adobe-3.0 Resource-CMap +%%DocumentNeededResources: ProcSet (CIDInit) +%%IncludeResource: ProcSet (CIDInit) +%%BeginResource: CMap (TeX-OT1IT-0) +%%Title: (TeX-OT1IT-0 TeX OT1IT 0) +%%Version: 1.000 +%%EndComments +/CIDInit /ProcSet findresource begin +12 dict begin +begincmap +/CIDSystemInfo +<< /Registry (TeX) +/Ordering (OT1IT) +/Supplement 0 +>> def +/CMapName /TeX-OT1IT-0 def +/CMapType 2 def +1 begincodespacerange +<00> <7F> +endcodespacerange +8 beginbfrange +<00> <01> <0393> +<09> <0A> <03A8> +<25> <26> <0025> +<28> <3B> <0028> +<3F> <5B> <003F> +<5D> <5E> <005D> +<61> <7A> <0061> +<7B> <7C> <2013> +endbfrange +42 beginbfchar +<02> <0398> +<03> <039B> +<04> <039E> +<05> <03A0> +<06> <03A3> +<07> <03D2> +<08> <03A6> +<0B> <00660066> +<0C> <00660069> +<0D> <0066006C> +<0E> <006600660069> +<0F> <00660066006C> +<10> <0131> +<11> <0237> +<12> <0060> +<13> <00B4> +<14> <02C7> +<15> <02D8> +<16> <00AF> +<17> <02DA> +<18> <00B8> +<19> <00DF> +<1A> <00E6> +<1B> <0153> +<1C> <00F8> +<1D> <00C6> +<1E> <0152> +<1F> <00D8> +<21> <0021> +<22> <201D> +<23> <0023> +<24> <00A3> +<27> <2019> +<3C> <00A1> +<3D> <003D> +<3E> <00BF> +<5C> <201C> +<5F> <02D9> +<60> <2018> +<7D> <02DD> +<7E> <007E> +<7F> <00A8> +endbfchar +endcmap +CMapName currentdict /CMap defineresource pop +end +end +%%EndResource +%%EOF + }\endgroup + \expandafter\edef\csname cmapOT1IT\endcsname#1{% + \pdffontattr#1{/ToUnicode \the\pdflastobj\space 0 R}% + }% +% +% \cmapOT1TT + \begingroup + \catcode`\^^M=\active \def^^M{^^J}% Output line endings as the ^^J char. + \catcode`\%=12 \immediate\pdfobj stream {%!PS-Adobe-3.0 Resource-CMap +%%DocumentNeededResources: ProcSet (CIDInit) +%%IncludeResource: ProcSet (CIDInit) +%%BeginResource: CMap (TeX-OT1TT-0) +%%Title: (TeX-OT1TT-0 TeX OT1TT 0) +%%Version: 1.000 +%%EndComments +/CIDInit /ProcSet findresource begin +12 dict begin +begincmap +/CIDSystemInfo +<< /Registry (TeX) +/Ordering (OT1TT) +/Supplement 0 +>> def +/CMapName /TeX-OT1TT-0 def +/CMapType 2 def +1 begincodespacerange +<00> <7F> +endcodespacerange +5 beginbfrange +<00> <01> <0393> +<09> <0A> <03A8> +<21> <26> <0021> +<28> <5F> <0028> +<61> <7E> <0061> +endbfrange +32 beginbfchar +<02> <0398> +<03> <039B> +<04> <039E> +<05> <03A0> +<06> <03A3> +<07> <03D2> +<08> <03A6> +<0B> <2191> +<0C> <2193> +<0D> <0027> +<0E> <00A1> +<0F> <00BF> +<10> <0131> +<11> <0237> +<12> <0060> +<13> <00B4> +<14> <02C7> +<15> <02D8> +<16> <00AF> +<17> <02DA> +<18> <00B8> +<19> <00DF> +<1A> <00E6> +<1B> <0153> +<1C> <00F8> +<1D> <00C6> +<1E> <0152> +<1F> <00D8> +<20> <2423> +<27> <2019> +<60> <2018> +<7F> <00A8> +endbfchar +endcmap +CMapName currentdict /CMap defineresource pop +end +end +%%EndResource +%%EOF + }\endgroup + \expandafter\edef\csname cmapOT1TT\endcsname#1{% + \pdffontattr#1{/ToUnicode \the\pdflastobj\space 0 R}% + }% +\fi\fi + + % Set the font macro #1 to the font named #2, adding on the % specified font prefix (normally `cm'). -% #3 is the font's design size, #4 is a scale factor -\def\setfont#1#2#3#4{\font#1=\fontprefix#2#3 scaled #4} +% #3 is the font's design size, #4 is a scale factor, #5 is the CMap +% encoding (currently only OT1, OT1IT and OT1TT are allowed, pass +% empty to omit). +\def\setfont#1#2#3#4#5{% + \font#1=\fontprefix#2#3 scaled #4 + \csname cmap#5\endcsname#1% +} +% This is what gets called when #5 of \setfont is empty. +\let\cmap\gobble +% emacs-page end of cmaps % Use cm as the default font prefix. % To specify the font prefix, you must define \fontprefix @@ -1454,118 +1979,293 @@ where each line of input produces a line of output.} \def\scshape{csc} \def\scbshape{csc} +% Definitions for a main text size of 11pt. This is the default in +% Texinfo. +% +\def\definetextfontsizexi{% % Text fonts (11.2pt, magstep1). -\newcount\mainmagstep -\ifx\bigger\relax - % not really supported. - \mainmagstep=\magstep1 - \setfont\textrm\rmshape{12}{1000} - \setfont\texttt\ttshape{12}{1000} -\else - \mainmagstep=\magstephalf - \setfont\textrm\rmshape{10}{\mainmagstep} - \setfont\texttt\ttshape{10}{\mainmagstep} -\fi -\setfont\textbf\bfshape{10}{\mainmagstep} -\setfont\textit\itshape{10}{\mainmagstep} -\setfont\textsl\slshape{10}{\mainmagstep} -\setfont\textsf\sfshape{10}{\mainmagstep} -\setfont\textsc\scshape{10}{\mainmagstep} -\setfont\textttsl\ttslshape{10}{\mainmagstep} +\def\textnominalsize{11pt} +\edef\mainmagstep{\magstephalf} +\setfont\textrm\rmshape{10}{\mainmagstep}{OT1} +\setfont\texttt\ttshape{10}{\mainmagstep}{OT1TT} +\setfont\textbf\bfshape{10}{\mainmagstep}{OT1} +\setfont\textit\itshape{10}{\mainmagstep}{OT1IT} +\setfont\textsl\slshape{10}{\mainmagstep}{OT1} +\setfont\textsf\sfshape{10}{\mainmagstep}{OT1} +\setfont\textsc\scshape{10}{\mainmagstep}{OT1} +\setfont\textttsl\ttslshape{10}{\mainmagstep}{OT1TT} \font\texti=cmmi10 scaled \mainmagstep \font\textsy=cmsy10 scaled \mainmagstep +\def\textecsize{1095} % A few fonts for @defun names and args. -\setfont\defbf\bfshape{10}{\magstep1} -\setfont\deftt\ttshape{10}{\magstep1} -\setfont\defttsl\ttslshape{10}{\magstep1} +\setfont\defbf\bfshape{10}{\magstep1}{OT1} +\setfont\deftt\ttshape{10}{\magstep1}{OT1TT} +\setfont\defttsl\ttslshape{10}{\magstep1}{OT1TT} \def\df{\let\tentt=\deftt \let\tenbf = \defbf \let\tenttsl=\defttsl \bf} % Fonts for indices, footnotes, small examples (9pt). -\setfont\smallrm\rmshape{9}{1000} -\setfont\smalltt\ttshape{9}{1000} -\setfont\smallbf\bfshape{10}{900} -\setfont\smallit\itshape{9}{1000} -\setfont\smallsl\slshape{9}{1000} -\setfont\smallsf\sfshape{9}{1000} -\setfont\smallsc\scshape{10}{900} -\setfont\smallttsl\ttslshape{10}{900} +\def\smallnominalsize{9pt} +\setfont\smallrm\rmshape{9}{1000}{OT1} +\setfont\smalltt\ttshape{9}{1000}{OT1TT} +\setfont\smallbf\bfshape{10}{900}{OT1} +\setfont\smallit\itshape{9}{1000}{OT1IT} +\setfont\smallsl\slshape{9}{1000}{OT1} +\setfont\smallsf\sfshape{9}{1000}{OT1} +\setfont\smallsc\scshape{10}{900}{OT1} +\setfont\smallttsl\ttslshape{10}{900}{OT1TT} \font\smalli=cmmi9 \font\smallsy=cmsy9 +\def\smallecsize{0900} % Fonts for small examples (8pt). -\setfont\smallerrm\rmshape{8}{1000} -\setfont\smallertt\ttshape{8}{1000} -\setfont\smallerbf\bfshape{10}{800} -\setfont\smallerit\itshape{8}{1000} -\setfont\smallersl\slshape{8}{1000} -\setfont\smallersf\sfshape{8}{1000} -\setfont\smallersc\scshape{10}{800} -\setfont\smallerttsl\ttslshape{10}{800} +\def\smallernominalsize{8pt} +\setfont\smallerrm\rmshape{8}{1000}{OT1} +\setfont\smallertt\ttshape{8}{1000}{OT1TT} +\setfont\smallerbf\bfshape{10}{800}{OT1} +\setfont\smallerit\itshape{8}{1000}{OT1IT} +\setfont\smallersl\slshape{8}{1000}{OT1} +\setfont\smallersf\sfshape{8}{1000}{OT1} +\setfont\smallersc\scshape{10}{800}{OT1} +\setfont\smallerttsl\ttslshape{10}{800}{OT1TT} \font\smalleri=cmmi8 \font\smallersy=cmsy8 +\def\smallerecsize{0800} % Fonts for title page (20.4pt): -\setfont\titlerm\rmbshape{12}{\magstep3} -\setfont\titleit\itbshape{10}{\magstep4} -\setfont\titlesl\slbshape{10}{\magstep4} -\setfont\titlett\ttbshape{12}{\magstep3} -\setfont\titlettsl\ttslshape{10}{\magstep4} -\setfont\titlesf\sfbshape{17}{\magstep1} +\def\titlenominalsize{20pt} +\setfont\titlerm\rmbshape{12}{\magstep3}{OT1} +\setfont\titleit\itbshape{10}{\magstep4}{OT1IT} +\setfont\titlesl\slbshape{10}{\magstep4}{OT1} +\setfont\titlett\ttbshape{12}{\magstep3}{OT1TT} +\setfont\titlettsl\ttslshape{10}{\magstep4}{OT1TT} +\setfont\titlesf\sfbshape{17}{\magstep1}{OT1} \let\titlebf=\titlerm -\setfont\titlesc\scbshape{10}{\magstep4} +\setfont\titlesc\scbshape{10}{\magstep4}{OT1} \font\titlei=cmmi12 scaled \magstep3 \font\titlesy=cmsy10 scaled \magstep4 -\def\authorrm{\secrm} -\def\authortt{\sectt} +\def\titleecsize{2074} % Chapter (and unnumbered) fonts (17.28pt). -\setfont\chaprm\rmbshape{12}{\magstep2} -\setfont\chapit\itbshape{10}{\magstep3} -\setfont\chapsl\slbshape{10}{\magstep3} -\setfont\chaptt\ttbshape{12}{\magstep2} -\setfont\chapttsl\ttslshape{10}{\magstep3} -\setfont\chapsf\sfbshape{17}{1000} +\def\chapnominalsize{17pt} +\setfont\chaprm\rmbshape{12}{\magstep2}{OT1} +\setfont\chapit\itbshape{10}{\magstep3}{OT1IT} +\setfont\chapsl\slbshape{10}{\magstep3}{OT1} +\setfont\chaptt\ttbshape{12}{\magstep2}{OT1TT} +\setfont\chapttsl\ttslshape{10}{\magstep3}{OT1TT} +\setfont\chapsf\sfbshape{17}{1000}{OT1} \let\chapbf=\chaprm -\setfont\chapsc\scbshape{10}{\magstep3} +\setfont\chapsc\scbshape{10}{\magstep3}{OT1} \font\chapi=cmmi12 scaled \magstep2 \font\chapsy=cmsy10 scaled \magstep3 +\def\chapecsize{1728} % Section fonts (14.4pt). -\setfont\secrm\rmbshape{12}{\magstep1} -\setfont\secit\itbshape{10}{\magstep2} -\setfont\secsl\slbshape{10}{\magstep2} -\setfont\sectt\ttbshape{12}{\magstep1} -\setfont\secttsl\ttslshape{10}{\magstep2} -\setfont\secsf\sfbshape{12}{\magstep1} +\def\secnominalsize{14pt} +\setfont\secrm\rmbshape{12}{\magstep1}{OT1} +\setfont\secit\itbshape{10}{\magstep2}{OT1IT} +\setfont\secsl\slbshape{10}{\magstep2}{OT1} +\setfont\sectt\ttbshape{12}{\magstep1}{OT1TT} +\setfont\secttsl\ttslshape{10}{\magstep2}{OT1TT} +\setfont\secsf\sfbshape{12}{\magstep1}{OT1} \let\secbf\secrm -\setfont\secsc\scbshape{10}{\magstep2} +\setfont\secsc\scbshape{10}{\magstep2}{OT1} \font\seci=cmmi12 scaled \magstep1 \font\secsy=cmsy10 scaled \magstep2 +\def\sececsize{1440} % Subsection fonts (13.15pt). -\setfont\ssecrm\rmbshape{12}{\magstephalf} -\setfont\ssecit\itbshape{10}{1315} -\setfont\ssecsl\slbshape{10}{1315} -\setfont\ssectt\ttbshape{12}{\magstephalf} -\setfont\ssecttsl\ttslshape{10}{1315} -\setfont\ssecsf\sfbshape{12}{\magstephalf} +\def\ssecnominalsize{13pt} +\setfont\ssecrm\rmbshape{12}{\magstephalf}{OT1} +\setfont\ssecit\itbshape{10}{1315}{OT1IT} +\setfont\ssecsl\slbshape{10}{1315}{OT1} +\setfont\ssectt\ttbshape{12}{\magstephalf}{OT1TT} +\setfont\ssecttsl\ttslshape{10}{1315}{OT1TT} +\setfont\ssecsf\sfbshape{12}{\magstephalf}{OT1} \let\ssecbf\ssecrm -\setfont\ssecsc\scbshape{10}{1315} +\setfont\ssecsc\scbshape{10}{1315}{OT1} \font\sseci=cmmi12 scaled \magstephalf \font\ssecsy=cmsy10 scaled 1315 +\def\ssececsize{1200} % Reduced fonts for @acro in text (10pt). -\setfont\reducedrm\rmshape{10}{1000} -\setfont\reducedtt\ttshape{10}{1000} -\setfont\reducedbf\bfshape{10}{1000} -\setfont\reducedit\itshape{10}{1000} -\setfont\reducedsl\slshape{10}{1000} -\setfont\reducedsf\sfshape{10}{1000} -\setfont\reducedsc\scshape{10}{1000} -\setfont\reducedttsl\ttslshape{10}{1000} +\def\reducednominalsize{10pt} +\setfont\reducedrm\rmshape{10}{1000}{OT1} +\setfont\reducedtt\ttshape{10}{1000}{OT1TT} +\setfont\reducedbf\bfshape{10}{1000}{OT1} +\setfont\reducedit\itshape{10}{1000}{OT1IT} +\setfont\reducedsl\slshape{10}{1000}{OT1} +\setfont\reducedsf\sfshape{10}{1000}{OT1} +\setfont\reducedsc\scshape{10}{1000}{OT1} +\setfont\reducedttsl\ttslshape{10}{1000}{OT1TT} \font\reducedi=cmmi10 \font\reducedsy=cmsy10 +\def\reducedecsize{1000} + +% reset the current fonts +\textfonts +\rm +} % end of 11pt text font size definitions + + +% Definitions to make the main text be 10pt Computer Modern, with +% section, chapter, etc., sizes following suit. This is for the GNU +% Press printing of the Emacs 22 manual. Maybe other manuals in the +% future. Used with @smallbook, which sets the leading to 12pt. +% +\def\definetextfontsizex{% +% Text fonts (10pt). +\def\textnominalsize{10pt} +\edef\mainmagstep{1000} +\setfont\textrm\rmshape{10}{\mainmagstep}{OT1} +\setfont\texttt\ttshape{10}{\mainmagstep}{OT1TT} +\setfont\textbf\bfshape{10}{\mainmagstep}{OT1} +\setfont\textit\itshape{10}{\mainmagstep}{OT1IT} +\setfont\textsl\slshape{10}{\mainmagstep}{OT1} +\setfont\textsf\sfshape{10}{\mainmagstep}{OT1} +\setfont\textsc\scshape{10}{\mainmagstep}{OT1} +\setfont\textttsl\ttslshape{10}{\mainmagstep}{OT1TT} +\font\texti=cmmi10 scaled \mainmagstep +\font\textsy=cmsy10 scaled \mainmagstep +\def\textecsize{1000} + +% A few fonts for @defun names and args. +\setfont\defbf\bfshape{10}{\magstephalf}{OT1} +\setfont\deftt\ttshape{10}{\magstephalf}{OT1TT} +\setfont\defttsl\ttslshape{10}{\magstephalf}{OT1TT} +\def\df{\let\tentt=\deftt \let\tenbf = \defbf \let\tenttsl=\defttsl \bf} + +% Fonts for indices, footnotes, small examples (9pt). +\def\smallnominalsize{9pt} +\setfont\smallrm\rmshape{9}{1000}{OT1} +\setfont\smalltt\ttshape{9}{1000}{OT1TT} +\setfont\smallbf\bfshape{10}{900}{OT1} +\setfont\smallit\itshape{9}{1000}{OT1IT} +\setfont\smallsl\slshape{9}{1000}{OT1} +\setfont\smallsf\sfshape{9}{1000}{OT1} +\setfont\smallsc\scshape{10}{900}{OT1} +\setfont\smallttsl\ttslshape{10}{900}{OT1TT} +\font\smalli=cmmi9 +\font\smallsy=cmsy9 +\def\smallecsize{0900} + +% Fonts for small examples (8pt). +\def\smallernominalsize{8pt} +\setfont\smallerrm\rmshape{8}{1000}{OT1} +\setfont\smallertt\ttshape{8}{1000}{OT1TT} +\setfont\smallerbf\bfshape{10}{800}{OT1} +\setfont\smallerit\itshape{8}{1000}{OT1IT} +\setfont\smallersl\slshape{8}{1000}{OT1} +\setfont\smallersf\sfshape{8}{1000}{OT1} +\setfont\smallersc\scshape{10}{800}{OT1} +\setfont\smallerttsl\ttslshape{10}{800}{OT1TT} +\font\smalleri=cmmi8 +\font\smallersy=cmsy8 +\def\smallerecsize{0800} + +% Fonts for title page (20.4pt): +\def\titlenominalsize{20pt} +\setfont\titlerm\rmbshape{12}{\magstep3}{OT1} +\setfont\titleit\itbshape{10}{\magstep4}{OT1IT} +\setfont\titlesl\slbshape{10}{\magstep4}{OT1} +\setfont\titlett\ttbshape{12}{\magstep3}{OT1TT} +\setfont\titlettsl\ttslshape{10}{\magstep4}{OT1TT} +\setfont\titlesf\sfbshape{17}{\magstep1}{OT1} +\let\titlebf=\titlerm +\setfont\titlesc\scbshape{10}{\magstep4}{OT1} +\font\titlei=cmmi12 scaled \magstep3 +\font\titlesy=cmsy10 scaled \magstep4 +\def\titleecsize{2074} + +% Chapter fonts (14.4pt). +\def\chapnominalsize{14pt} +\setfont\chaprm\rmbshape{12}{\magstep1}{OT1} +\setfont\chapit\itbshape{10}{\magstep2}{OT1IT} +\setfont\chapsl\slbshape{10}{\magstep2}{OT1} +\setfont\chaptt\ttbshape{12}{\magstep1}{OT1TT} +\setfont\chapttsl\ttslshape{10}{\magstep2}{OT1TT} +\setfont\chapsf\sfbshape{12}{\magstep1}{OT1} +\let\chapbf\chaprm +\setfont\chapsc\scbshape{10}{\magstep2}{OT1} +\font\chapi=cmmi12 scaled \magstep1 +\font\chapsy=cmsy10 scaled \magstep2 +\def\chapecsize{1440} + +% Section fonts (12pt). +\def\secnominalsize{12pt} +\setfont\secrm\rmbshape{12}{1000}{OT1} +\setfont\secit\itbshape{10}{\magstep1}{OT1IT} +\setfont\secsl\slbshape{10}{\magstep1}{OT1} +\setfont\sectt\ttbshape{12}{1000}{OT1TT} +\setfont\secttsl\ttslshape{10}{\magstep1}{OT1TT} +\setfont\secsf\sfbshape{12}{1000}{OT1} +\let\secbf\secrm +\setfont\secsc\scbshape{10}{\magstep1}{OT1} +\font\seci=cmmi12 +\font\secsy=cmsy10 scaled \magstep1 +\def\sececsize{1200} + +% Subsection fonts (10pt). +\def\ssecnominalsize{10pt} +\setfont\ssecrm\rmbshape{10}{1000}{OT1} +\setfont\ssecit\itbshape{10}{1000}{OT1IT} +\setfont\ssecsl\slbshape{10}{1000}{OT1} +\setfont\ssectt\ttbshape{10}{1000}{OT1TT} +\setfont\ssecttsl\ttslshape{10}{1000}{OT1TT} +\setfont\ssecsf\sfbshape{10}{1000}{OT1} +\let\ssecbf\ssecrm +\setfont\ssecsc\scbshape{10}{1000}{OT1} +\font\sseci=cmmi10 +\font\ssecsy=cmsy10 +\def\ssececsize{1000} + +% Reduced fonts for @acro in text (9pt). +\def\reducednominalsize{9pt} +\setfont\reducedrm\rmshape{9}{1000}{OT1} +\setfont\reducedtt\ttshape{9}{1000}{OT1TT} +\setfont\reducedbf\bfshape{10}{900}{OT1} +\setfont\reducedit\itshape{9}{1000}{OT1IT} +\setfont\reducedsl\slshape{9}{1000}{OT1} +\setfont\reducedsf\sfshape{9}{1000}{OT1} +\setfont\reducedsc\scshape{10}{900}{OT1} +\setfont\reducedttsl\ttslshape{10}{900}{OT1TT} +\font\reducedi=cmmi9 +\font\reducedsy=cmsy9 +\def\reducedecsize{0900} + +% reduce space between paragraphs +\divide\parskip by 2 + +% reset the current fonts +\textfonts +\rm +} % end of 10pt text font size definitions + + +% We provide the user-level command +% @fonttextsize 10 +% (or 11) to redefine the text font size. pt is assumed. +% +\def\xword{10} +\def\xiword{11} +% +\parseargdef\fonttextsize{% + \def\textsizearg{#1}% + \wlog{doing @fonttextsize \textsizearg}% + % + % Set \globaldefs so that documents can use this inside @tex, since + % makeinfo 4.8 does not support it, but we need it nonetheless. + % + \begingroup \globaldefs=1 + \ifx\textsizearg\xword \definetextfontsizex + \else \ifx\textsizearg\xiword \definetextfontsizexi + \else + \errhelp=\EMsimple + \errmessage{@fonttextsize only supports `10' or `11', not `\textsizearg'} + \fi\fi + \endgroup +} + % In order for the font changes to affect most math symbols and letters, % we have to define the \textfont of the standard families. Since @@ -1583,18 +2283,19 @@ where each line of input produces a line of output.} % of just \STYLE. We do this because \STYLE needs to also set the % current \fam for math mode. Our \STYLE (e.g., \rm) commands hardwire % \tenSTYLE to set the current font. -% +% % Each font-changing command also sets the names \lsize (one size lower) % and \lllsize (three sizes lower). These relative commands are used in % the LaTeX logo and acronyms. -% +% % This all needs generalizing, badly. -% +% \def\textfonts{% \let\tenrm=\textrm \let\tenit=\textit \let\tensl=\textsl \let\tenbf=\textbf \let\tentt=\texttt \let\smallcaps=\textsc \let\tensf=\textsf \let\teni=\texti \let\tensy=\textsy \let\tenttsl=\textttsl + \def\curfontsize{text}% \def\lsize{reduced}\def\lllsize{smaller}% \resetmathfonts \setleading{\textleading}} \def\titlefonts{% @@ -1602,13 +2303,16 @@ where each line of input produces a line of output.} \let\tenbf=\titlebf \let\tentt=\titlett \let\smallcaps=\titlesc \let\tensf=\titlesf \let\teni=\titlei \let\tensy=\titlesy \let\tenttsl=\titlettsl + \def\curfontsize{title}% \def\lsize{chap}\def\lllsize{subsec}% \resetmathfonts \setleading{25pt}} -\def\titlefont#1{{\titlefonts\rm #1}} +\def\titlefont#1{{\titlefonts\rmisbold #1}} \def\chapfonts{% \let\tenrm=\chaprm \let\tenit=\chapit \let\tensl=\chapsl \let\tenbf=\chapbf \let\tentt=\chaptt \let\smallcaps=\chapsc - \let\tensf=\chapsf \let\teni=\chapi \let\tensy=\chapsy \let\tenttsl=\chapttsl + \let\tensf=\chapsf \let\teni=\chapi \let\tensy=\chapsy + \let\tenttsl=\chapttsl + \def\curfontsize{chap}% \def\lsize{sec}\def\lllsize{text}% \resetmathfonts \setleading{19pt}} \def\secfonts{% @@ -1616,6 +2320,7 @@ where each line of input produces a line of output.} \let\tenbf=\secbf \let\tentt=\sectt \let\smallcaps=\secsc \let\tensf=\secsf \let\teni=\seci \let\tensy=\secsy \let\tenttsl=\secttsl + \def\curfontsize{sec}% \def\lsize{subsec}\def\lllsize{reduced}% \resetmathfonts \setleading{16pt}} \def\subsecfonts{% @@ -1623,6 +2328,7 @@ where each line of input produces a line of output.} \let\tenbf=\ssecbf \let\tentt=\ssectt \let\smallcaps=\ssecsc \let\tensf=\ssecsf \let\teni=\sseci \let\tensy=\ssecsy \let\tenttsl=\ssecttsl + \def\curfontsize{ssec}% \def\lsize{text}\def\lllsize{small}% \resetmathfonts \setleading{15pt}} \let\subsubsecfonts = \subsecfonts @@ -1631,6 +2337,7 @@ where each line of input produces a line of output.} \let\tenbf=\reducedbf \let\tentt=\reducedtt \let\reducedcaps=\reducedsc \let\tensf=\reducedsf \let\teni=\reducedi \let\tensy=\reducedsy \let\tenttsl=\reducedttsl + \def\curfontsize{reduced}% \def\lsize{small}\def\lllsize{smaller}% \resetmathfonts \setleading{10.5pt}} \def\smallfonts{% @@ -1638,6 +2345,7 @@ where each line of input produces a line of output.} \let\tenbf=\smallbf \let\tentt=\smalltt \let\smallcaps=\smallsc \let\tensf=\smallsf \let\teni=\smalli \let\tensy=\smallsy \let\tenttsl=\smallttsl + \def\curfontsize{small}% \def\lsize{smaller}\def\lllsize{smaller}% \resetmathfonts \setleading{10.5pt}} \def\smallerfonts{% @@ -1645,9 +2353,20 @@ where each line of input produces a line of output.} \let\tenbf=\smallerbf \let\tentt=\smallertt \let\smallcaps=\smallersc \let\tensf=\smallersf \let\teni=\smalleri \let\tensy=\smallersy \let\tenttsl=\smallerttsl + \def\curfontsize{smaller}% \def\lsize{smaller}\def\lllsize{smaller}% \resetmathfonts \setleading{9.5pt}} +% Fonts for short table of contents. +\setfont\shortcontrm\rmshape{12}{1000}{OT1} +\setfont\shortcontbf\bfshape{10}{\magstep1}{OT1} % no cmb12 +\setfont\shortcontsl\slshape{12}{1000}{OT1} +\setfont\shortconttt\ttshape{12}{1000}{OT1TT} + +% Define these just so they can be easily changed for other fonts. +\def\angleleft{$\langle$} +\def\angleright{$\rangle$} + % Set the fonts to use with the @small... environments. \let\smallexamplefonts = \smallfonts @@ -1661,28 +2380,128 @@ where each line of input produces a line of output.} % % By the way, for comparison, here's what fits with @example (10pt): % 8.5x11=71 smallbook=60 a4=75 a5=58 -% -% I wish the USA used A4 paper. % --karl, 24jan03. - % Set up the default fonts, so we can use them for creating boxes. % -\textfonts \rm +\definetextfontsizexi -% Define these so they can be easily changed for other fonts. -\def\angleleft{$\langle$} -\def\angleright{$\rangle$} + +\message{markup,} + +% Check if we are currently using a typewriter font. Since all the +% Computer Modern typewriter fonts have zero interword stretch (and +% shrink), and it is reasonable to expect all typewriter fonts to have +% this property, we can check that font parameter. +% +\def\ifmonospace{\ifdim\fontdimen3\font=0pt } + +% Markup style infrastructure. \defmarkupstylesetup\INITMACRO will +% define and register \INITMACRO to be called on markup style changes. +% \INITMACRO can check \currentmarkupstyle for the innermost +% style and the set of \ifmarkupSTYLE switches for all styles +% currently in effect. +\newif\ifmarkupvar +\newif\ifmarkupsamp +\newif\ifmarkupkey +%\newif\ifmarkupfile % @file == @samp. +%\newif\ifmarkupoption % @option == @samp. +\newif\ifmarkupcode +\newif\ifmarkupkbd +%\newif\ifmarkupenv % @env == @code. +%\newif\ifmarkupcommand % @command == @code. +\newif\ifmarkuptex % @tex (and part of @math, for now). +\newif\ifmarkupexample +\newif\ifmarkupverb +\newif\ifmarkupverbatim + +\let\currentmarkupstyle\empty + +\def\setupmarkupstyle#1{% + \csname markup#1true\endcsname + \def\currentmarkupstyle{#1}% + \markupstylesetup +} + +\let\markupstylesetup\empty + +\def\defmarkupstylesetup#1{% + \expandafter\def\expandafter\markupstylesetup + \expandafter{\markupstylesetup #1}% + \def#1% +} + +% Markup style setup for left and right quotes. +\defmarkupstylesetup\markupsetuplq{% + \expandafter\let\expandafter \temp \csname markupsetuplq\currentmarkupstyle\endcsname + \ifx\temp\relax \markupsetuplqdefault \else \temp \fi +} + +\defmarkupstylesetup\markupsetuprq{% + \expandafter\let\expandafter \temp \csname markupsetuprq\currentmarkupstyle\endcsname + \ifx\temp\relax \markupsetuprqdefault \else \temp \fi +} + +{ +\catcode`\'=\active +\catcode`\`=\active + +\gdef\markupsetuplqdefault{\let`\lq} +\gdef\markupsetuprqdefault{\let'\rq} + +\gdef\markupsetcodequoteleft{\let`\codequoteleft} +\gdef\markupsetcodequoteright{\let'\codequoteright} + +\gdef\markupsetnoligaturesquoteleft{\let`\noligaturesquoteleft} +} + +\let\markupsetuplqcode \markupsetcodequoteleft +\let\markupsetuprqcode \markupsetcodequoteright +\let\markupsetuplqexample \markupsetcodequoteleft +\let\markupsetuprqexample \markupsetcodequoteright +\let\markupsetuplqverb \markupsetcodequoteleft +\let\markupsetuprqverb \markupsetcodequoteright +\let\markupsetuplqverbatim \markupsetcodequoteleft +\let\markupsetuprqverbatim \markupsetcodequoteright + +\let\markupsetuplqsamp \markupsetnoligaturesquoteleft +\let\markupsetuplqkbd \markupsetnoligaturesquoteleft + +% Allow an option to not replace quotes with a regular directed right +% quote/apostrophe (char 0x27), but instead use the undirected quote +% from cmtt (char 0x0d). The undirected quote is ugly, so don't make it +% the default, but it works for pasting with more pdf viewers (at least +% evince), the lilypond developers report. xpdf does work with the +% regular 0x27. +% +\def\codequoteright{% + \expandafter\ifx\csname SETtxicodequoteundirected\endcsname\relax + \expandafter\ifx\csname SETcodequoteundirected\endcsname\relax + '% + \else \char'15 \fi + \else \char'15 \fi +} +% +% and a similar option for the left quote char vs. a grave accent. +% Modern fonts display ASCII 0x60 as a grave accent, so some people like +% the code environments to do likewise. +% +\def\codequoteleft{% + \expandafter\ifx\csname SETtxicodequotebacktick\endcsname\relax + \expandafter\ifx\csname SETcodequotebacktick\endcsname\relax + % [Knuth] pp. 380,381,391 + % \relax disables Spanish ligatures ?` and !` of \tt font. + \relax`% + \else \char'22 \fi + \else \char'22 \fi +} + +% [Knuth] pp. 380,381,391, disable Spanish ligatures ?` and !` of \tt font. +\def\noligaturesquoteleft{\relax\lq} % Count depth in font-changes, for error checks \newcount\fontdepth \fontdepth=0 -% Fonts for short table of contents. -\setfont\shortcontrm\rmshape{12}{1000} -\setfont\shortcontbf\bfshape{10}{\magstep1} % no cmb12 -\setfont\shortcontsl\slshape{12}{1000} -\setfont\shortconttt\ttshape{12}{1000} - %% Add scribe-like font environments, plus @l for inline lisp (usually sans %% serif) and @ii for TeX italic @@ -1697,18 +2516,28 @@ where each line of input produces a line of output.} % @var is set to this for defun arguments. \def\ttslanted#1{{\ttsl #1}\futurelet\next\smartitalicx} -% like \smartslanted except unconditionally use \sl. We never want +% @cite is like \smartslanted except unconditionally use \sl. We never want % ttsl for book titles, do we? \def\cite#1{{\sl #1}\futurelet\next\smartitalicx} \let\i=\smartitalic -\let\var=\smartslanted +\let\slanted=\smartslanted +\def\var#1{{\setupmarkupstyle{var}\smartslanted{#1}}} \let\dfn=\smartslanted \let\emph=\smartitalic +% Explicit font changes: @r, @sc, undocumented @ii. +\def\r#1{{\rm #1}} % roman font +\def\sc#1{{\smallcaps#1}} % smallcaps font +\def\ii#1{{\it #1}} % italic font + +% @b, explicit bold. Also @strong. \def\b#1{{\bf #1}} \let\strong=\b +% @sansserif, explicit sans. +\def\sansserif#1{{\sf #1}} + % We can't just use \exhyphenpenalty, because that only has effect at % the end of a paragraph. Restore normal hyphenation at the end of the % group within which \nohyphenation is presumably called. @@ -1721,27 +2550,48 @@ where each line of input produces a line of output.} % sometimes \x has an active definition that messes things up. % \catcode`@=11 - \def\frenchspacing{% + \def\plainfrenchspacing{% \sfcode\dotChar =\@m \sfcode\questChar=\@m \sfcode\exclamChar=\@m \sfcode\colonChar=\@m \sfcode\semiChar =\@m \sfcode\commaChar =\@m + \def\endofsentencespacefactor{1000}% for @. and friends + } + \def\plainnonfrenchspacing{% + \sfcode`\.3000\sfcode`\?3000\sfcode`\!3000 + \sfcode`\:2000\sfcode`\;1500\sfcode`\,1250 + \def\endofsentencespacefactor{3000}% for @. and friends } \catcode`@=\other +\def\endofsentencespacefactor{3000}% default +% @t, explicit typewriter. \def\t#1{% - {\tt \rawbackslash \frenchspacing #1}% + {\tt \rawbackslash \plainfrenchspacing #1}% \null } -\def\samp#1{`\tclose{#1}'\null} -\setfont\keyrm\rmshape{8}{1000} -\font\keysy=cmsy9 -\def\key#1{{\keyrm\textfont2=\keysy \leavevmode\hbox{% - \raise0.4pt\hbox{\angleleft}\kern-.08em\vtop{% - \vbox{\hrule\kern-0.4pt - \hbox{\raise0.4pt\hbox{\vphantom{\angleleft}}#1}}% - \kern-0.4pt\hrule}% - \kern-.06em\raise0.4pt\hbox{\angleright}}}} -% The old definition, with no lozenge: -%\def\key #1{{\ttsl \nohyphenation \uppercase{#1}}\null} + +% @samp. +\def\samp#1{{\setupmarkupstyle{samp}\lq\tclose{#1}\rq\null}} + +% definition of @key that produces a lozenge. Doesn't adjust to text size. +%\setfont\keyrm\rmshape{8}{1000}{OT1} +%\font\keysy=cmsy9 +%\def\key#1{{\keyrm\textfont2=\keysy \leavevmode\hbox{% +% \raise0.4pt\hbox{\angleleft}\kern-.08em\vtop{% +% \vbox{\hrule\kern-0.4pt +% \hbox{\raise0.4pt\hbox{\vphantom{\angleleft}}#1}}% +% \kern-0.4pt\hrule}% +% \kern-.06em\raise0.4pt\hbox{\angleright}}}} + +% definition of @key with no lozenge. If the current font is already +% monospace, don't change it; that way, we respect @kbdinputstyle. But +% if it isn't monospace, then use \tt. +% +\def\key#1{{\setupmarkupstyle{key}% + \nohyphenation + \ifmonospace\else\tt\fi + #1}\null} + +% ctrl is no longer a Texinfo command. \def\ctrl #1{{\tt \rawbackslash \hat}#1} % @file, @option are the same as @samp. @@ -1765,7 +2615,7 @@ where each line of input produces a line of output.} \nohyphenation % \rawbackslash - \frenchspacing + \plainfrenchspacing #1% }% \null @@ -1781,12 +2631,21 @@ where each line of input produces a line of output.} % and arrange explicitly to hyphenate at a dash. % -- rms. { - \catcode`\-=\active - \catcode`\_=\active + \catcode`\-=\active \catcode`\_=\active + \catcode`\'=\active \catcode`\`=\active + \global\let'=\rq \global\let`=\lq % default definitions % \global\def\code{\begingroup - \catcode`\-=\active \let-\codedash - \catcode`\_=\active \let_\codeunder + \setupmarkupstyle{code}% + % The following should really be moved into \setupmarkupstyle handlers. + \catcode\dashChar=\active \catcode\underChar=\active + \ifallowcodebreaks + \let-\codedash + \let_\codeunder + \else + \let-\realdash + \let_\realunder + \fi \codex } } @@ -1806,43 +2665,73 @@ where each line of input produces a line of output.} } \def\codex #1{\tclose{#1}\endgroup} +% An additional complication: the above will allow breaks after, e.g., +% each of the four underscores in __typeof__. This is undesirable in +% some manuals, especially if they don't have long identifiers in +% general. @allowcodebreaks provides a way to control this. +% +\newif\ifallowcodebreaks \allowcodebreakstrue + +\def\keywordtrue{true} +\def\keywordfalse{false} + +\parseargdef\allowcodebreaks{% + \def\txiarg{#1}% + \ifx\txiarg\keywordtrue + \allowcodebreakstrue + \else\ifx\txiarg\keywordfalse + \allowcodebreaksfalse + \else + \errhelp = \EMsimple + \errmessage{Unknown @allowcodebreaks option `\txiarg'}% + \fi\fi +} + % @kbd is like @code, except that if the argument is just one @key command, % then @kbd has no effect. +\def\kbd#1{{\setupmarkupstyle{kbd}\def\look{#1}\expandafter\kbdfoo\look??\par}} % @kbdinputstyle -- arg is `distinct' (@kbd uses slanted tty font always), % `example' (@kbd uses ttsl only inside of @example and friends), % or `code' (@kbd uses normal tty font always). \parseargdef\kbdinputstyle{% - \def\arg{#1}% - \ifx\arg\worddistinct + \def\txiarg{#1}% + \ifx\txiarg\worddistinct \gdef\kbdexamplefont{\ttsl}\gdef\kbdfont{\ttsl}% - \else\ifx\arg\wordexample + \else\ifx\txiarg\wordexample \gdef\kbdexamplefont{\ttsl}\gdef\kbdfont{\tt}% - \else\ifx\arg\wordcode + \else\ifx\txiarg\wordcode \gdef\kbdexamplefont{\tt}\gdef\kbdfont{\tt}% \else \errhelp = \EMsimple - \errmessage{Unknown @kbdinputstyle option `\arg'}% + \errmessage{Unknown @kbdinputstyle option `\txiarg'}% \fi\fi\fi } \def\worddistinct{distinct} \def\wordexample{example} \def\wordcode{code} -% Default is `distinct.' +% Default is `distinct'. \kbdinputstyle distinct \def\xkey{\key} \def\kbdfoo#1#2#3\par{\def\one{#1}\def\three{#3}\def\threex{??}% \ifx\one\xkey\ifx\threex\three \key{#2}% -\else{\tclose{\kbdfont\look}}\fi -\else{\tclose{\kbdfont\look}}\fi} +\else{\tclose{\kbdfont\setupmarkupstyle{kbd}\look}}\fi +\else{\tclose{\kbdfont\setupmarkupstyle{kbd}\look}}\fi} -% For @url, @env, @command quotes seem unnecessary, so use \code. -\let\url=\code +% For @indicateurl, @env, @command quotes seem unnecessary, so use \code. +\let\indicateurl=\code \let\env=\code \let\command=\code +% @clicksequence{File @click{} Open ...} +\def\clicksequence#1{\begingroup #1\endgroup} + +% @clickstyle @arrow (by default) +\parseargdef\clickstyle{\def\click{#1}} +\def\click{\arrow} + % @uref (abbreviation for `urlref') takes an optional (comma-separated) % second argument specifying the text to display and an optional third % arg as text to display instead of (rather than in addition to) the url @@ -1871,6 +2760,10 @@ where each line of input produces a line of output.} \endlink \endgroup} +% @url synonym for @uref, since that's how everyone uses it. +% +\let\url=\uref + % rms does not like angle brackets --karl, 17may97. % So now @email is just like @uref, unless we are pdf. % @@ -1888,30 +2781,20 @@ where each line of input produces a line of output.} \let\email=\uref \fi -% Check if we are currently using a typewriter font. Since all the -% Computer Modern typewriter fonts have zero interword stretch (and -% shrink), and it is reasonable to expect all typewriter fonts to have -% this property, we can check that font parameter. -% -\def\ifmonospace{\ifdim\fontdimen3\font=0pt } - % Typeset a dimension, e.g., `in' or `pt'. The only reason for the % argument is to make the input look right: @dmn{pt} instead of @dmn{}pt. % \def\dmn#1{\thinspace #1} -\def\kbd#1{\def\look{#1}\expandafter\kbdfoo\look??\par} - % @l was never documented to mean ``switch to the Lisp font'', % and it is not used as such in any manual I can find. We need it for % Polish suppressed-l. --karl, 22sep96. %\def\l#1{{\li #1}\null} -% Explicit font changes: @r, @sc, undocumented @ii. -\def\r#1{{\rm #1}} % roman font -\def\sc#1{{\smallcaps#1}} % smallcaps font -\def\ii#1{{\it #1}} % italic font - +% @acronym for "FBI", "NATO", and the like. +% We print this one point size smaller, since it's intended for +% all-uppercase. +% \def\acronym#1{\doacronym #1,,\finish} \def\doacronym#1,#2,#3\finish{% {\selectfonts\lsize #1}% @@ -1921,10 +2804,172 @@ where each line of input produces a line of output.} \fi } -% @pounds{} is a sterling sign, which is in the CM italic font. -% +% @abbr for "Comput. J." and the like. +% No font change, but don't do end-of-sentence spacing. +% +\def\abbr#1{\doabbr #1,,\finish} +\def\doabbr#1,#2,#3\finish{% + {\plainfrenchspacing #1}% + \def\temp{#2}% + \ifx\temp\empty \else + \space ({\unsepspaces \ignorespaces \temp \unskip})% + \fi +} + + +\message{glyphs,} + +% @point{}, @result{}, @expansion{}, @print{}, @equiv{}. +% +% Since these characters are used in examples, they should be an even number of +% \tt widths. Each \tt character is 1en, so two makes it 1em. +% +\def\point{$\star$} +\def\arrow{\leavevmode\raise.05ex\hbox to 1em{\hfil$\rightarrow$\hfil}} +\def\result{\leavevmode\raise.05ex\hbox to 1em{\hfil$\Rightarrow$\hfil}} +\def\expansion{\leavevmode\hbox to 1em{\hfil$\mapsto$\hfil}} +\def\print{\leavevmode\lower.1ex\hbox to 1em{\hfil$\dashv$\hfil}} +\def\equiv{\leavevmode\hbox to 1em{\hfil$\ptexequiv$\hfil}} + +% The @error{} command. +% Adapted from the TeXbook's \boxit. +% +\newbox\errorbox +% +{\tentt \global\dimen0 = 3em}% Width of the box. +\dimen2 = .55pt % Thickness of rules +% The text. (`r' is open on the right, `e' somewhat less so on the left.) +\setbox0 = \hbox{\kern-.75pt \reducedsf error\kern-1.5pt} +% +\setbox\errorbox=\hbox to \dimen0{\hfil + \hsize = \dimen0 \advance\hsize by -5.8pt % Space to left+right. + \advance\hsize by -2\dimen2 % Rules. + \vbox{% + \hrule height\dimen2 + \hbox{\vrule width\dimen2 \kern3pt % Space to left of text. + \vtop{\kern2.4pt \box0 \kern2.4pt}% Space above/below. + \kern3pt\vrule width\dimen2}% Space to right. + \hrule height\dimen2} + \hfil} +% +\def\error{\leavevmode\lower.7ex\copy\errorbox} + +% @pounds{} is a sterling sign, which Knuth put in the CM italic font. +% \def\pounds{{\it\$}} +% @euro{} comes from a separate font, depending on the current style. +% We use the free feym* fonts from the eurosym package by Henrik +% Theiling, which support regular, slanted, bold and bold slanted (and +% "outlined" (blackboard board, sort of) versions, which we don't need). +% It is available from http://www.ctan.org/tex-archive/fonts/eurosym. +% +% Although only regular is the truly official Euro symbol, we ignore +% that. The Euro is designed to be slightly taller than the regular +% font height. +% +% feymr - regular +% feymo - slanted +% feybr - bold +% feybo - bold slanted +% +% There is no good (free) typewriter version, to my knowledge. +% A feymr10 euro is ~7.3pt wide, while a normal cmtt10 char is ~5.25pt wide. +% Hmm. +% +% Also doesn't work in math. Do we need to do math with euro symbols? +% Hope not. +% +% +\def\euro{{\eurofont e}} +\def\eurofont{% + % We set the font at each command, rather than predefining it in + % \textfonts and the other font-switching commands, so that + % installations which never need the symbol don't have to have the + % font installed. + % + % There is only one designed size (nominal 10pt), so we always scale + % that to the current nominal size. + % + % By the way, simply using "at 1em" works for cmr10 and the like, but + % does not work for cmbx10 and other extended/shrunken fonts. + % + \def\eurosize{\csname\curfontsize nominalsize\endcsname}% + % + \ifx\curfontstyle\bfstylename + % bold: + \font\thiseurofont = \ifusingit{feybo10}{feybr10} at \eurosize + \else + % regular: + \font\thiseurofont = \ifusingit{feymo10}{feymr10} at \eurosize + \fi + \thiseurofont +} + +% Glyphs from the EC fonts. We don't use \let for the aliases, because +% sometimes we redefine the original macro, and the alias should reflect +% the redefinition. +% +% Use LaTeX names for the Icelandic letters. +\def\DH{{\ecfont \char"D0}} % Eth +\def\dh{{\ecfont \char"F0}} % eth +\def\TH{{\ecfont \char"DE}} % Thorn +\def\th{{\ecfont \char"FE}} % thorn +% +\def\guillemetleft{{\ecfont \char"13}} +\def\guillemotleft{\guillemetleft} +\def\guillemetright{{\ecfont \char"14}} +\def\guillemotright{\guillemetright} +\def\guilsinglleft{{\ecfont \char"0E}} +\def\guilsinglright{{\ecfont \char"0F}} +\def\quotedblbase{{\ecfont \char"12}} +\def\quotesinglbase{{\ecfont \char"0D}} +% +% This positioning is not perfect (see the ogonek LaTeX package), but +% we have the precomposed glyphs for the most common cases. We put the +% tests to use those glyphs in the single \ogonek macro so we have fewer +% dummy definitions to worry about for index entries, etc. +% +% ogonek is also used with other letters in Lithuanian (IOU), but using +% the precomposed glyphs for those is not so easy since they aren't in +% the same EC font. +\def\ogonek#1{{% + \def\temp{#1}% + \ifx\temp\macrocharA\Aogonek + \else\ifx\temp\macrochara\aogonek + \else\ifx\temp\macrocharE\Eogonek + \else\ifx\temp\macrochare\eogonek + \else + \ecfont \setbox0=\hbox{#1}% + \ifdim\ht0=1ex\accent"0C #1% + \else\ooalign{\unhbox0\crcr\hidewidth\char"0C \hidewidth}% + \fi + \fi\fi\fi\fi + }% +} +\def\Aogonek{{\ecfont \char"81}}\def\macrocharA{A} +\def\aogonek{{\ecfont \char"A1}}\def\macrochara{a} +\def\Eogonek{{\ecfont \char"86}}\def\macrocharE{E} +\def\eogonek{{\ecfont \char"A6}}\def\macrochare{e} +% +% Use the ec* fonts (cm-super in outline format) for non-CM glyphs. +\def\ecfont{% + % We can't distinguish serif/sans and italic/slanted, but this + % is used for crude hacks anyway (like adding French and German + % quotes to documents typeset with CM, where we lose kerning), so + % hopefully nobody will notice/care. + \edef\ecsize{\csname\curfontsize ecsize\endcsname}% + \edef\nominalsize{\csname\curfontsize nominalsize\endcsname}% + \ifx\curfontstyle\bfstylename + % bold: + \font\thisecfont = ecb\ifusingit{i}{x}\ecsize \space at \nominalsize + \else + % regular: + \font\thisecfont = ec\ifusingit{ti}{rm}\ecsize \space at \nominalsize + \fi + \thisecfont +} + % @registeredsymbol - R in a circle. The font for the R should really % be smaller yet, but lllsize is the best we can do for now. % Adapted from the plain.tex definition of \copyright. @@ -1935,6 +2980,24 @@ where each line of input produces a line of output.} }$% } +% @textdegree - the normal degrees sign. +% +\def\textdegree{$^\circ$} + +% Laurent Siebenmann reports \Orb undefined with: +% Textures 1.7.7 (preloaded format=plain 93.10.14) (68K) 16 APR 2004 02:38 +% so we'll define it if necessary. +% +\ifx\Orb\undefined +\def\Orb{\mathhexbox20D} +\fi + +% Quotes. +\chardef\quotedblleft="5C +\chardef\quotedblright=`\" +\chardef\quoteleft=`\` +\chardef\quoteright=`\' + \message{page headings,} @@ -2019,12 +3082,9 @@ where each line of input produces a line of output.} \let\subtitlerm=\tenrm \def\subtitlefont{\subtitlerm \normalbaselineskip = 13pt \normalbaselines} -\def\authorfont{\authorrm \normalbaselineskip = 16pt \normalbaselines - \let\tt=\authortt} - \parseargdef\title{% \checkenv\titlepage - \leftline{\titlefonts\rm #1} + \leftline{\titlefonts\rmisbold #1} % print a rule at the page bottom also. \finishedtitlepagefalse \vskip4pt \hrule height 4pt width \hsize \vskip4pt @@ -2037,7 +3097,7 @@ where each line of input produces a line of output.} % @author should come last, but may come many times. % It can also be used inside @quotation. -% +% \parseargdef\author{% \def\temp{\quotation}% \ifx\thisenv\temp @@ -2045,7 +3105,7 @@ where each line of input produces a line of output.} \else \checkenv\titlepage \ifseenauthor\else \vskip 0pt plus 1filll \seenauthortrue \fi - {\authorfont \leftline{#1}}% + {\secfonts\rmisbold \leftline{#1}}% \fi } @@ -2098,12 +3158,39 @@ where each line of input produces a line of output.} % % Leave some space for the footline. Hopefully ok to assume % @evenfooting will not be used by itself. - \global\advance\pageheight by -\baselineskip - \global\advance\vsize by -\baselineskip + \global\advance\pageheight by -12pt + \global\advance\vsize by -12pt } \parseargdef\everyfooting{\oddfootingxxx{#1}\evenfootingxxx{#1}} +% @evenheadingmarks top \thischapter <- chapter at the top of a page +% @evenheadingmarks bottom \thischapter <- chapter at the bottom of a page +% +% The same set of arguments for: +% +% @oddheadingmarks +% @evenfootingmarks +% @oddfootingmarks +% @everyheadingmarks +% @everyfootingmarks + +\def\evenheadingmarks{\headingmarks{even}{heading}} +\def\oddheadingmarks{\headingmarks{odd}{heading}} +\def\evenfootingmarks{\headingmarks{even}{footing}} +\def\oddfootingmarks{\headingmarks{odd}{footing}} +\def\everyheadingmarks#1 {\headingmarks{even}{heading}{#1} + \headingmarks{odd}{heading}{#1} } +\def\everyfootingmarks#1 {\headingmarks{even}{footing}{#1} + \headingmarks{odd}{footing}{#1} } +% #1 = even/odd, #2 = heading/footing, #3 = top/bottom. +\def\headingmarks#1#2#3 {% + \expandafter\let\expandafter\temp \csname get#3headingmarks\endcsname + \global\expandafter\let\csname get#1#2marks\endcsname \temp +} + +\everyheadingmarks bottom +\everyfootingmarks bottom % @headings double turns headings on for double-sided printing. % @headings single turns headings on for single-sided printing. @@ -2240,17 +3327,13 @@ where each line of input produces a line of output.} % \parskip glue -- logically it's part of the @item we just started. \nobreak \vskip-\parskip % - % Stop a page break at the \parskip glue coming up. (Unfortunately - % we can't prevent a possible page break at the following - % \baselineskip glue.) However, if what follows is an environment - % such as @example, there will be no \parskip glue; then - % the negative vskip we just would cause the example and the item to - % crash together. So we use this bizarre value of 10001 as a signal - % to \aboveenvbreak to insert \parskip glue after all. - % (Possibly there are other commands that could be followed by - % @example which need the same treatment, but not section titles; or - % maybe section titles are the only special case and they should be - % penalty 10001...) + % Stop a page break at the \parskip glue coming up. However, if + % what follows is an environment such as @example, there will be no + % \parskip glue; then the negative vskip we just inserted would + % cause the example and the item to crash together. So we use this + % bizarre value of 10001 as a signal to \aboveenvbreak to insert + % \parskip glue after all. Section titles are handled this way also. + % \penalty 10001 \endgroup \itemxneedsnegativevskipfalse @@ -2276,15 +3359,26 @@ where each line of input produces a line of output.} % @table, @ftable, @vtable. \envdef\table{% \let\itemindex\gobble - \tablex + \tablecheck{table}% } \envdef\ftable{% \def\itemindex ##1{\doind {fn}{\code{##1}}}% - \tablex + \tablecheck{ftable}% } \envdef\vtable{% \def\itemindex ##1{\doind {vr}{\code{##1}}}% - \tablex + \tablecheck{vtable}% +} +\def\tablecheck#1{% + \ifnum \the\catcode`\^^M=\active + \endgroup + \errmessage{This command won't work in this context; perhaps the problem is + that we are \inenvironment\thisenv}% + \def\next{\doignore{#1}}% + \else + \let\next\tablex + \fi + \next } \def\tablex#1{% \def\itemindicate{#1}% @@ -2333,9 +3427,18 @@ where each line of input produces a line of output.} \parindent=0pt \parskip=\smallskipamount \ifdim\parskip=0pt \parskip=2pt \fi + % + % Try typesetting the item mark that if the document erroneously says + % something like @itemize @samp (intending @table), there's an error + % right away at the @itemize. It's not the best error message in the + % world, but it's better than leaving it to the @item. This means if + % the user wants an empty mark, they have to say @w{} not just @w. \def\itemcontents{#1}% + \setbox0 = \hbox{\itemcontents}% + % % @itemize with no arg is equivalent to @itemize @bullet. \ifx\itemcontents\empty\def\itemcontents{\bullet}\fi + % \let\item=\itemizeitem } @@ -2356,6 +3459,7 @@ where each line of input produces a line of output.} \ifnum\lastpenalty<10000 \parskip=0in \fi \noindent \hbox to 0pt{\hss \itemcontents \kern\itemmargin}% + % \vadjust{\penalty 1200}}% not good to break after first line of item. \flushcr } @@ -2537,7 +3641,7 @@ where each line of input produces a line of output.} % #1 is the @columnfraction, usually a decimal number like .5, but might % be just 1. We just use it, whatever it is. -% +% \def\pickupwholefraction#1 {% \global\advance\colcount by 1 \expandafter\xdef\csname col\the\colcount\endcsname{#1\hsize}% @@ -2577,12 +3681,19 @@ where each line of input produces a line of output.} % % @headitem starts a heading row, which we typeset in bold. % Assignments have to be global since we are inside the implicit group -% of an alignment entry. Note that \everycr resets \everytab. -\def\headitem{\checkenv\multitable \crcr \global\everytab={\bf}\the\everytab}% +% of an alignment entry. \everycr resets \everytab so we don't have to +% undo it ourselves. +\def\headitemfont{\b}% for people to use in the template row; not changeable +\def\headitem{% + \checkenv\multitable + \crcr + \global\everytab={\bf}% can't use \headitemfont since the parsing differs + \the\everytab % for the first item +}% % % A \tab used to include \hskip1sp. But then the space in a template % line is not enough. That is bad. So let's go back to just `&' until -% we encounter the problem it was intended to solve again. +% we again encounter the problem the 1sp was intended to solve. % --karl, nathan@acm.org, 20apr99. \def\tab{\checkenv\multitable &\the\everytab}% @@ -2595,7 +3706,10 @@ where each line of input produces a line of output.} \startsavinginserts % % @item within a multitable starts a normal row. - \let\item\crcr + % We use \def instead of \let so that if one of the multitable entries + % contains an @itemize, we don't choke on the \item (seen as \crcr aka + % \endtemplate) expanding \doitemize. + \def\item{\crcr}% % \tolerance=9500 \hbadness=9500 @@ -2680,19 +3794,17 @@ where each line of input produces a line of output.} \global\setpercentfalse } -\def\setmultitablespacing{% test to see if user has set \multitablelinespace. -% If so, do nothing. If not, give it an appropriate dimension based on -% current baselineskip. +\def\setmultitablespacing{% + \def\multistrut{\strut}% just use the standard line spacing + % + % Compute \multitablelinespace (if not defined by user) for use in + % \multitableparskip calculation. We used define \multistrut based on + % this, but (ironically) that caused the spacing to be off. + % See bug-texinfo report from Werner Lemberg, 31 Oct 2004 12:52:20 +0100. \ifdim\multitablelinespace=0pt \setbox0=\vbox{X}\global\multitablelinespace=\the\baselineskip \global\advance\multitablelinespace by-\ht0 -%% strut to put in table in case some entry doesn't have descenders, -%% to keep lines equally spaced -\let\multistrut = \strut -\else -%% FIXME: what is \box0 supposed to be? -\gdef\multistrut{\vrule height\multitablelinespace depth\dp0 -width0pt\relax} \fi +\fi %% Test to see if parskip is larger than space between lines of %% table. If not, do nothing. %% If so, set to same dimension as multitablelinespace. @@ -2750,6 +3862,7 @@ width0pt\relax} \fi \def\doignore#1{\begingroup % Scan in ``verbatim'' mode: + \obeylines \catcode`\@ = \other \catcode`\{ = \other \catcode`\} = \other @@ -2761,25 +3874,25 @@ width0pt\relax} \fi \doignorecount = 0 % % Swallow text until we reach the matching `@end #1'. - \dodoignore {#1}% + \dodoignore{#1}% } { \catcode`_=11 % We want to use \_STOP_ which cannot appear in texinfo source. \obeylines % % \gdef\dodoignore#1{% - % #1 contains the string `ifinfo'. + % #1 contains the command name as a string, e.g., `ifinfo'. + % + % Define a command to find the next `@end #1'. + \long\def\doignoretext##1^^M@end #1{% + \doignoretextyyy##1^^M@#1\_STOP_}% % - % Define a command to find the next `@end #1', which must be on a line - % by itself. - \long\def\doignoretext##1^^M@end #1{\doignoretextyyy##1^^M@#1\_STOP_}% % And this command to find another #1 command, at the beginning of a % line. (Otherwise, we would consider a line `@c @ifset', for % example, to count as an @ifset for nesting.) \long\def\doignoretextyyy##1^^M@#1##2\_STOP_{\doignoreyyy{##2}\_STOP_}% % % And now expand that command. - \obeylines % \doignoretext ^^M% }% } @@ -2797,7 +3910,7 @@ width0pt\relax} \fi } % We have to swallow the remaining "\_STOP_". -% +% \def\doignoretextzzz#1{% \ifnum\doignorecount = 0 % We have just found the outermost @end. \let\next\enddoignore @@ -2809,7 +3922,12 @@ width0pt\relax} \fi } % Finish off ignored text. -\def\enddoignore{\endgroup\ignorespaces} +{ \obeylines% + % Ignore anything after the last `@end #1'; this matters in verbatim + % environments, where otherwise the newline after an ignored conditional + % would result in a blank line in the output. + \gdef\enddoignore#1^^M{\endgroup\ignorespaces}% +} % @set VAR sets the variable VAR to an empty value. @@ -2922,9 +4040,8 @@ width0pt\relax} \fi % Index generation facilities % Define \newwrite to be identical to plain tex's \newwrite -% except not \outer, so it can be used within \newindex. -{\catcode`\@=11 -\gdef\newwrite{\alloc@7\write\chardef\sixt@@n}} +% except not \outer, so it can be used within macros and \if's. +\edef\newwrite{\makecsname{ptexnewwrite}} % \newindex {foo} defines an index named foo. % It automatically defines \fooindex such that @@ -2975,11 +4092,11 @@ width0pt\relax} \fi \def\dosynindex#1#2#3{% % Only do \closeout if we haven't already done it, else we'll end up % closing the target index. - \expandafter \ifx\csname donesynindex#2\endcsname \undefined + \expandafter \ifx\csname donesynindex#2\endcsname \relax % The \closeout helps reduce unnecessary open files; the limit on the % Acorn RISC OS is a mere 16 files. \expandafter\closeout\csname#2indfile\endcsname - \expandafter\let\csname\donesynindex#2\endcsname = 1 + \expandafter\let\csname donesynindex#2\endcsname = 1 \fi % redefine \fooindfile: \expandafter\let\expandafter\temp\expandafter=\csname#3indfile\endcsname @@ -3010,41 +4127,50 @@ width0pt\relax} \fi % we have to laboriously prevent expansion for those that we don't. % \def\indexdummies{% + \escapechar = `\\ % use backslash in output files. \def\@{@}% change to @@ when we switch to @ as escape char in index files. \def\ {\realbackslash\space }% + % % Need these in case \tex is in effect and \{ is a \delimiter again. % But can't use \lbracecmd and \rbracecmd because texindex assumes % braces and backslashes are used only as delimiters. \let\{ = \mylbrace \let\} = \myrbrace % - % \definedummyword defines \#1 as \realbackslash #1\space, thus - % effectively preventing its expansion. This is used only for control - % words, not control letters, because the \space would be incorrect - % for control characters, but is needed to separate the control word - % from whatever follows. + % I don't entirely understand this, but when an index entry is + % generated from a macro call, the \endinput which \scanmacro inserts + % causes processing to be prematurely terminated. This is, + % apparently, because \indexsorttmp is fully expanded, and \endinput + % is an expandable command. The redefinition below makes \endinput + % disappear altogether for that purpose -- although logging shows that + % processing continues to some further point. On the other hand, it + % seems \endinput does not hurt in the printed index arg, since that + % is still getting written without apparent harm. % - % For control letters, we have \definedummyletter, which omits the - % space. + % Sample source (mac-idx3.tex, reported by Graham Percival to + % help-texinfo, 22may06): + % @macro funindex {WORD} + % @findex xyz + % @end macro + % ... + % @funindex commtest % - % These can be used both for control words that take an argument and - % those that do not. If it is followed by {arg} in the input, then - % that will dutifully get written to the index (or wherever). + % The above is not enough to reproduce the bug, but it gives the flavor. % - \def\definedummyword##1{% - \expandafter\def\csname ##1\endcsname{\realbackslash ##1\space}% - }% - \def\definedummyletter##1{% - \expandafter\def\csname ##1\endcsname{\realbackslash ##1}% - }% + % Sample whatsit resulting: + % .@write3{\entry{xyz}{@folio }{@code {xyz@endinput }}} + % + % So: + \let\endinput = \empty % % Do the redefinitions. \commondummies } -% For the aux file, @ is the escape character. So we want to redefine -% everything using @ instead of \realbackslash. When everything uses -% @, this will be simpler. +% For the aux and toc files, @ is the escape character. So we want to +% redefine everything using @ as the escape character (instead of +% \realbackslash, still used for index files). When everything uses @, +% this will be simpler. % \def\atdummies{% \def\@{@@}% @@ -3052,144 +4178,168 @@ width0pt\relax} \fi \let\{ = \lbraceatcmd \let\} = \rbraceatcmd % - % (See comments in \indexdummies.) - \def\definedummyword##1{% - \expandafter\def\csname ##1\endcsname{@##1\space}% - }% - \def\definedummyletter##1{% - \expandafter\def\csname ##1\endcsname{@##1}% - }% - % % Do the redefinitions. \commondummies + \otherbackslash } -% Called from \indexdummies and \atdummies. \definedummyword and -% \definedummyletter must be defined first. +% Called from \indexdummies and \atdummies. % \def\commondummies{% % - \normalturnoffactive + % \definedummyword defines \#1 as \string\#1\space, thus effectively + % preventing its expansion. This is used only for control% words, + % not control letters, because the \space would be incorrect for + % control characters, but is needed to separate the control word + % from whatever follows. + % + % For control letters, we have \definedummyletter, which omits the + % space. + % + % These can be used both for control words that take an argument and + % those that do not. If it is followed by {arg} in the input, then + % that will dutifully get written to the index (or wherever). + % + \def\definedummyword ##1{\def##1{\string##1\space}}% + \def\definedummyletter##1{\def##1{\string##1}}% + \let\definedummyaccent\definedummyletter % \commondummiesnofonts % - \definedummyletter{_}% + \definedummyletter\_% % % Non-English letters. - \definedummyword{AA}% - \definedummyword{AE}% - \definedummyword{L}% - \definedummyword{OE}% - \definedummyword{O}% - \definedummyword{aa}% - \definedummyword{ae}% - \definedummyword{l}% - \definedummyword{oe}% - \definedummyword{o}% - \definedummyword{ss}% - \definedummyword{exclamdown}% - \definedummyword{questiondown}% - \definedummyword{ordf}% - \definedummyword{ordm}% + \definedummyword\AA + \definedummyword\AE + \definedummyword\DH + \definedummyword\L + \definedummyword\O + \definedummyword\OE + \definedummyword\TH + \definedummyword\aa + \definedummyword\ae + \definedummyword\dh + \definedummyword\exclamdown + \definedummyword\l + \definedummyword\o + \definedummyword\oe + \definedummyword\ordf + \definedummyword\ordm + \definedummyword\questiondown + \definedummyword\ss + \definedummyword\th % % Although these internal commands shouldn't show up, sometimes they do. - \definedummyword{bf}% - \definedummyword{gtr}% - \definedummyword{hat}% - \definedummyword{less}% - \definedummyword{sf}% - \definedummyword{sl}% - \definedummyword{tclose}% - \definedummyword{tt}% - % - \definedummyword{LaTeX}% - \definedummyword{TeX}% + \definedummyword\bf + \definedummyword\gtr + \definedummyword\hat + \definedummyword\less + \definedummyword\sf + \definedummyword\sl + \definedummyword\tclose + \definedummyword\tt + % + \definedummyword\LaTeX + \definedummyword\TeX % % Assorted special characters. - \definedummyword{bullet}% - \definedummyword{copyright}% - \definedummyword{registeredsymbol}% - \definedummyword{dots}% - \definedummyword{enddots}% - \definedummyword{equiv}% - \definedummyword{error}% - \definedummyword{expansion}% - \definedummyword{minus}% - \definedummyword{pounds}% - \definedummyword{point}% - \definedummyword{print}% - \definedummyword{result}% + \definedummyword\bullet + \definedummyword\comma + \definedummyword\copyright + \definedummyword\registeredsymbol + \definedummyword\dots + \definedummyword\enddots + \definedummyword\equiv + \definedummyword\error + \definedummyword\euro + \definedummyword\guillemetleft + \definedummyword\guillemetright + \definedummyword\guilsinglleft + \definedummyword\guilsinglright + \definedummyword\expansion + \definedummyword\minus + \definedummyword\ogonek + \definedummyword\pounds + \definedummyword\point + \definedummyword\print + \definedummyword\quotedblbase + \definedummyword\quotedblleft + \definedummyword\quotedblright + \definedummyword\quoteleft + \definedummyword\quoteright + \definedummyword\quotesinglbase + \definedummyword\result + \definedummyword\textdegree + % + % We want to disable all macros so that they are not expanded by \write. + \macrolist + % + \normalturnoffactive % % Handle some cases of @value -- where it does not contain any % (non-fully-expandable) commands. \makevalueexpandable - % - % Normal spaces, not active ones. - \unsepspaces - % - % No macro expansion. - \turnoffmacros } % \commondummiesnofonts: common to \commondummies and \indexnofonts. % -% Better have this without active chars. -{ - \catcode`\~=\other - \gdef\commondummiesnofonts{% - % Control letters and accents. - \definedummyletter{!}% - \definedummyletter{"}% - \definedummyletter{'}% - \definedummyletter{*}% - \definedummyletter{,}% - \definedummyletter{.}% - \definedummyletter{/}% - \definedummyletter{:}% - \definedummyletter{=}% - \definedummyletter{?}% - \definedummyletter{^}% - \definedummyletter{`}% - \definedummyletter{~}% - \definedummyword{u}% - \definedummyword{v}% - \definedummyword{H}% - \definedummyword{dotaccent}% - \definedummyword{ringaccent}% - \definedummyword{tieaccent}% - \definedummyword{ubaraccent}% - \definedummyword{udotaccent}% - \definedummyword{dotless}% - % - % Texinfo font commands. - \definedummyword{b}% - \definedummyword{i}% - \definedummyword{r}% - \definedummyword{sc}% - \definedummyword{t}% - % - % Commands that take arguments. - \definedummyword{acronym}% - \definedummyword{cite}% - \definedummyword{code}% - \definedummyword{command}% - \definedummyword{dfn}% - \definedummyword{emph}% - \definedummyword{env}% - \definedummyword{file}% - \definedummyword{kbd}% - \definedummyword{key}% - \definedummyword{math}% - \definedummyword{option}% - \definedummyword{samp}% - \definedummyword{strong}% - \definedummyword{tie}% - \definedummyword{uref}% - \definedummyword{url}% - \definedummyword{var}% - \definedummyword{verb}% - \definedummyword{w}% - } +\def\commondummiesnofonts{% + % Control letters and accents. + \definedummyletter\!% + \definedummyaccent\"% + \definedummyaccent\'% + \definedummyletter\*% + \definedummyaccent\,% + \definedummyletter\.% + \definedummyletter\/% + \definedummyletter\:% + \definedummyaccent\=% + \definedummyletter\?% + \definedummyaccent\^% + \definedummyaccent\`% + \definedummyaccent\~% + \definedummyword\u + \definedummyword\v + \definedummyword\H + \definedummyword\dotaccent + \definedummyword\ogonek + \definedummyword\ringaccent + \definedummyword\tieaccent + \definedummyword\ubaraccent + \definedummyword\udotaccent + \definedummyword\dotless + % + % Texinfo font commands. + \definedummyword\b + \definedummyword\i + \definedummyword\r + \definedummyword\sc + \definedummyword\t + % + % Commands that take arguments. + \definedummyword\acronym + \definedummyword\cite + \definedummyword\code + \definedummyword\command + \definedummyword\dfn + \definedummyword\emph + \definedummyword\env + \definedummyword\file + \definedummyword\kbd + \definedummyword\key + \definedummyword\math + \definedummyword\option + \definedummyword\pxref + \definedummyword\ref + \definedummyword\samp + \definedummyword\strong + \definedummyword\tie + \definedummyword\uref + \definedummyword\url + \definedummyword\var + \definedummyword\verb + \definedummyword\w + \definedummyword\xref } % \indexnofonts is used when outputting the strings to sort the index @@ -3198,10 +4348,12 @@ width0pt\relax} \fi % would be for a given command (usually its argument). % \def\indexnofonts{% - \def\definedummyword##1{% - \expandafter\let\csname ##1\endcsname\asis - }% - \let\definedummyletter=\definedummyword + % Accent commands should become @asis. + \def\definedummyaccent##1{\let##1\asis}% + % We can just ignore other control letters. + \def\definedummyletter##1{\let##1\empty}% + % Hopefully, all control words can become @asis. + \let\definedummyword\definedummyaccent % \commondummiesnofonts % @@ -3218,19 +4370,23 @@ width0pt\relax} \fi % Non-English letters. \def\AA{AA}% \def\AE{AE}% + \def\DH{DZZ}% \def\L{L}% \def\OE{OE}% \def\O{O}% + \def\TH{ZZZ}% \def\aa{aa}% \def\ae{ae}% + \def\dh{dzz}% + \def\exclamdown{!}% \def\l{l}% \def\oe{oe}% - \def\o{o}% - \def\ss{ss}% - \def\exclamdown{!}% - \def\questiondown{?}% \def\ordf{a}% \def\ordm{o}% + \def\o{o}% + \def\questiondown{?}% + \def\ss{ss}% + \def\th{zzz}% % \def\LaTeX{LaTeX}% \def\TeX{TeX}% @@ -3238,18 +4394,43 @@ width0pt\relax} \fi % Assorted special characters. % (The following {} will end up in the sort string, but that's ok.) \def\bullet{bullet}% + \def\comma{,}% \def\copyright{copyright}% \def\registeredsymbol{R}% \def\dots{...}% \def\enddots{...}% \def\equiv{==}% \def\error{error}% + \def\euro{euro}% + \def\guillemetleft{<<}% + \def\guillemetright{>>}% + \def\guilsinglleft{<}% + \def\guilsinglright{>}% \def\expansion{==>}% \def\minus{-}% \def\pounds{pounds}% \def\point{.}% \def\print{-|}% + \def\quotedblbase{"}% + \def\quotedblleft{"}% + \def\quotedblright{"}% + \def\quoteleft{`}% + \def\quoteright{'}% + \def\quotesinglbase{,}% \def\result{=>}% + \def\textdegree{degrees}% + % + % We need to get rid of all macros, leaving only the arguments (if present). + % Of course this is not nearly correct, but it is the best we can do for now. + % makeinfo does not expand macros in the argument to @deffn, which ends up + % writing an index entry, and texindex isn't prepared for an index sort entry + % that starts with \. + % + % Since macro invocations are followed by braces, we can just redefine them + % to take a single TeX argument. The case of a macro invocation that + % goes to end-of-line is not handled. + % + \macrolist } \let\indexbackslash=0 %overridden during \printindex. @@ -3277,11 +4458,7 @@ width0pt\relax} \fi % \edef\writeto{\csname#1indfile\endcsname}% % - \ifvmode - \dosubindsanitize - \else - \dosubindwrite - \fi + \safewhatsit\dosubindwrite }% \fi } @@ -3296,7 +4473,6 @@ width0pt\relax} \fi % % Remember, we are within a group. \indexdummies % Must do this here, since \bf, etc expand at this stage - \escapechar=`\\ \def\backslashcurfont{\indexbackslash}% \indexbackslash isn't defined now % so it will be output as is; and it will print as backslash. % @@ -3319,13 +4495,13 @@ width0pt\relax} \fi \temp } -% Take care of unwanted page breaks: +% Take care of unwanted page breaks/skips around a whatsit: % % If a skip is the last thing on the list now, preserve it % by backing up by \lastskip, doing the \write, then inserting % the skip again. Otherwise, the whatsit generated by the -% \write will make \lastskip zero. The result is that sequences -% like this: +% \write or \pdfdest will make \lastskip zero. The result is that +% sequences like this: % @end defun % @tindex whatever % @defun ... @@ -3349,44 +4525,52 @@ width0pt\relax} \fi % \edef\zeroskipmacro{\expandafter\the\csname z@skip\endcsname} % +\newskip\whatsitskip +\newcount\whatsitpenalty +% % ..., ready, GO: % -\def\dosubindsanitize{% +\def\safewhatsit#1{% +\ifhmode + #1% +\else % \lastskip and \lastpenalty cannot both be nonzero simultaneously. - \skip0 = \lastskip + \whatsitskip = \lastskip \edef\lastskipmacro{\the\lastskip}% - \count255 = \lastpenalty + \whatsitpenalty = \lastpenalty % % If \lastskip is nonzero, that means the last item was a % skip. And since a skip is discardable, that means this - % -\skip0 glue we're inserting is preceded by a + % -\whatsitskip glue we're inserting is preceded by a % non-discardable item, therefore it is not a potential % breakpoint, therefore no \nobreak needed. \ifx\lastskipmacro\zeroskipmacro \else - \vskip-\skip0 + \vskip-\whatsitskip \fi % - \dosubindwrite + #1% % \ifx\lastskipmacro\zeroskipmacro - % if \lastskip was zero, perhaps the last item was a - % penalty, and perhaps it was >=10000, e.g., a \nobreak. - % In that case, we want to re-insert the penalty; since we - % just inserted a non-discardable item, any following glue - % (such as a \parskip) would be a breakpoint. For example: + % If \lastskip was zero, perhaps the last item was a penalty, and + % perhaps it was >=10000, e.g., a \nobreak. In that case, we want + % to re-insert the same penalty (values >10000 are used for various + % signals); since we just inserted a non-discardable item, any + % following glue (such as a \parskip) would be a breakpoint. For example: + % % @deffn deffn-whatever % @vindex index-whatever % Description. % would allow a break between the index-whatever whatsit % and the "Description." paragraph. - \ifnum\count255>9999 \nobreak \fi + \ifnum\whatsitpenalty>9999 \penalty\whatsitpenalty \fi \else % On the other hand, if we had a nonzero \lastskip, % this make-up glue would be preceded by a non-discardable item % (the whatsit from the \write), so we must insert a \nobreak. - \nobreak\vskip\skip0 + \nobreak\vskip\whatsitskip \fi +\fi } % The index entry written in the file actually looks like @@ -3429,6 +4613,7 @@ width0pt\relax} \fi % \smallfonts \rm \tolerance = 9500 + \plainfrenchspacing \everypar = {}% don't want the \kern\-parindent from indentation suppression. % % See if the index file exists and is nonempty. @@ -3478,7 +4663,10 @@ width0pt\relax} \fi \removelastskip % % We like breaks before the index initials, so insert a bonus. - \penalty -300 + \nobreak + \vskip 0pt plus 3\baselineskip + \penalty 0 + \vskip 0pt plus -3\baselineskip % % Typeset the initial. Making this add up to a whole number of % baselineskips increases the chance of the dots lining up from column @@ -3488,10 +4676,9 @@ width0pt\relax} \fi % No shrink because it confuses \balancecolumns. \vskip 1.67\baselineskip plus .5\baselineskip \leftline{\secbf #1}% - \vskip .33\baselineskip plus .1\baselineskip - % % Do our best not to break after the initial. \nobreak + \vskip .33\baselineskip plus .1\baselineskip }} % \entry typesets a paragraph consisting of the text (#1), dot leaders, and @@ -3500,10 +4687,10 @@ width0pt\relax} \fi % % A straightforward implementation would start like this: % \def\entry#1#2{... -% But this frozes the catcodes in the argument, and can cause problems to +% But this freezes the catcodes in the argument, and can cause problems to % @code, which sets - active. This problem was fixed by a kludge--- % ``-'' was active throughout whole index, but this isn't really right. -% +% % The right solution is to prevent \entry from swallowing the whole text. % --kasal, 21nov03 \def\entry{% @@ -3556,11 +4743,8 @@ width0pt\relax} \fi % The following is kludged to not output a line of dots in the index if % there are no page numbers. The next person who breaks this will be % cursed by a Unix daemon. - \def\tempa{{\rm }}% - \def\tempb{#1}% - \edef\tempc{\tempa}% - \edef\tempd{\tempb}% - \ifx\tempc\tempd + \setbox\boxA = \hbox{#1}% + \ifdim\wd\boxA = 0pt \ % \else % @@ -3584,9 +4768,9 @@ width0pt\relax} \fi \endgroup } -% Like \dotfill except takes at least 1 em. +% Like plain.tex's \dotfill, except uses up at least 1 em. \def\indexdotfill{\cleaders - \hbox{$\mathsurround=0pt \mkern1.5mu ${\it .}$ \mkern1.5mu$}\hskip 1em plus 1fill} + \hbox{$\mathsurround=0pt \mkern1.5mu.\mkern1.5mu$}\hskip 1em plus 1fill} \def\primary #1{\line{#1\hfil}} @@ -3696,6 +4880,34 @@ width0pt\relax} \fi % % All done with double columns. \def\enddoublecolumns{% + % The following penalty ensures that the page builder is exercised + % _before_ we change the output routine. This is necessary in the + % following situation: + % + % The last section of the index consists only of a single entry. + % Before this section, \pagetotal is less than \pagegoal, so no + % break occurs before the last section starts. However, the last + % section, consisting of \initial and the single \entry, does not + % fit on the page and has to be broken off. Without the following + % penalty the page builder will not be exercised until \eject + % below, and by that time we'll already have changed the output + % routine to the \balancecolumns version, so the next-to-last + % double-column page will be processed with \balancecolumns, which + % is wrong: The two columns will go to the main vertical list, with + % the broken-off section in the recent contributions. As soon as + % the output routine finishes, TeX starts reconsidering the page + % break. The two columns and the broken-off section both fit on the + % page, because the two columns now take up only half of the page + % goal. When TeX sees \eject from below which follows the final + % section, it invokes the new output routine that we've set after + % \balancecolumns below; \onepageout will try to fit the two columns + % and the final section into the vbox of \pageheight (see + % \pagebody), causing an overfull box. + % + % Note that glue won't work here, because glue does not exercise the + % page builder, unlike penalties (see The TeXbook, pp. 280-281). + \penalty0 + % \output = {% % Split the last of the double-column material. Leave it on the % current page, no automatic page break. @@ -3769,7 +4981,7 @@ width0pt\relax} \fi % We do the following ugly conditional instead of the above simple % construct for the sake of pdftex, which needs the actual % letter in the expansion, not just typeset. -% +% \def\appendixletter{% \ifnum\appendixno=`A A% \else\ifnum\appendixno=`B B% @@ -3805,11 +5017,15 @@ width0pt\relax} \fi \fi\fi\fi\fi\fi\fi\fi\fi\fi\fi\fi\fi\fi \fi\fi\fi\fi\fi\fi\fi\fi\fi\fi\fi\fi\fi} -% Each @chapter defines this as the name of the chapter. -% page headings and footings can use it. @section does likewise. -% However, they are not reliable, because we don't use marks. +% Each @chapter defines these (using marks) as the number+name, number +% and name of the chapter. Page headings and footings can use +% these. @section does likewise. \def\thischapter{} +\def\thischapternum{} +\def\thischaptername{} \def\thissection{} +\def\thissectionnum{} +\def\thissectionname{} \newcount\absseclevel % used to calculate proper heading level \newcount\secbase\secbase=0 % @raisesections/@lowersections modify this count @@ -3822,60 +5038,95 @@ width0pt\relax} \fi \def\lowersections{\global\advance\secbase by 1} \let\down=\lowersections % original BFox name -% Choose a numbered-heading macro -% #1 is heading level if unmodified by @raisesections or @lowersections -% #2 is text for heading -\def\numhead#1#2{\absseclevel=\secbase\advance\absseclevel by #1 -\ifcase\absseclevel - \chapterzzz{#2}% - \or \seczzz{#2}% - \or \numberedsubseczzz{#2}% - \or \numberedsubsubseczzz{#2}% +% we only have subsub. +\chardef\maxseclevel = 3 +% +% A numbered section within an unnumbered changes to unnumbered too. +% To achive this, remember the "biggest" unnum. sec. we are currently in: +\chardef\unmlevel = \maxseclevel +% +% Trace whether the current chapter is an appendix or not: +% \chapheadtype is "N" or "A", unnumbered chapters are ignored. +\def\chapheadtype{N} + +% Choose a heading macro +% #1 is heading type +% #2 is heading level +% #3 is text for heading +\def\genhead#1#2#3{% + % Compute the abs. sec. level: + \absseclevel=#2 + \advance\absseclevel by \secbase + % Make sure \absseclevel doesn't fall outside the range: + \ifnum \absseclevel < 0 + \absseclevel = 0 \else - \ifnum \absseclevel<0 \chapterzzz{#2}% - \else \numberedsubsubseczzz{#2}% + \ifnum \absseclevel > 3 + \absseclevel = 3 \fi \fi - \suppressfirstparagraphindent -} - -% like \numhead, but chooses appendix heading levels -\def\apphead#1#2{\absseclevel=\secbase\advance\absseclevel by #1 -\ifcase\absseclevel - \appendixzzz{#2}% - \or \appendixsectionzzz{#2}% - \or \appendixsubseczzz{#2}% - \or \appendixsubsubseczzz{#2}% + % The heading type: + \def\headtype{#1}% + \if \headtype U% + \ifnum \absseclevel < \unmlevel + \chardef\unmlevel = \absseclevel + \fi \else - \ifnum \absseclevel<0 \appendixzzz{#2}% - \else \appendixsubsubseczzz{#2}% + % Check for appendix sections: + \ifnum \absseclevel = 0 + \edef\chapheadtype{\headtype}% + \else + \if \headtype A\if \chapheadtype N% + \errmessage{@appendix... within a non-appendix chapter}% + \fi\fi + \fi + % Check for numbered within unnumbered: + \ifnum \absseclevel > \unmlevel + \def\headtype{U}% + \else + \chardef\unmlevel = 3 \fi \fi - \suppressfirstparagraphindent -} - -% like \numhead, but chooses numberless heading levels -\def\unnmhead#1#2{\absseclevel=\secbase\advance\absseclevel by #1 - \ifcase\absseclevel - \unnumberedzzz{#2}% - \or \unnumberedseczzz{#2}% - \or \unnumberedsubseczzz{#2}% - \or \unnumberedsubsubseczzz{#2}% + % Now print the heading: + \if \headtype U% + \ifcase\absseclevel + \unnumberedzzz{#3}% + \or \unnumberedseczzz{#3}% + \or \unnumberedsubseczzz{#3}% + \or \unnumberedsubsubseczzz{#3}% + \fi \else - \ifnum \absseclevel<0 \unnumberedzzz{#2}% - \else \unnumberedsubsubseczzz{#2}% + \if \headtype A% + \ifcase\absseclevel + \appendixzzz{#3}% + \or \appendixsectionzzz{#3}% + \or \appendixsubseczzz{#3}% + \or \appendixsubsubseczzz{#3}% + \fi + \else + \ifcase\absseclevel + \chapterzzz{#3}% + \or \seczzz{#3}% + \or \numberedsubseczzz{#3}% + \or \numberedsubsubseczzz{#3}% + \fi \fi \fi \suppressfirstparagraphindent } +% an interface: +\def\numhead{\genhead N} +\def\apphead{\genhead A} +\def\unnmhead{\genhead U} + % @chapter, @appendix, @unnumbered. Increment top-level counter, reset % all lower-level sectioning counters to zero. -% +% % Also set \chaplevelprefix, which we prepend to @float sequence numbers % (e.g., figures), q.v. By default (before any chapter), that is empty. \let\chaplevelprefix = \empty -% +% \outer\parseargdef\chapter{\numhead0{#1}} % normally numhead0 calls chapterzzz \def\chapterzzz#1{% % section resetting is \global in case the chapter is in a group, such @@ -3887,7 +5138,9 @@ width0pt\relax} \fi \gdef\chaplevelprefix{\the\chapno.}% \resetallfloatnos % - \message{\putwordChapter\space \the\chapno}% + % \putwordChapter can contain complex things in translations. + \toks0=\expandafter{\putwordChapter}% + \message{\the\toks0 \space \the\chapno}% % % Write the actual heading. \chapmacro{#1}{Ynumbered}{\the\chapno}% @@ -3898,15 +5151,17 @@ width0pt\relax} \fi \global\let\subsubsection = \numberedsubsubsec } -\outer\parseargdef\appendix{\apphead0{#1}} % normally apphead0 calls appendixzzz +\outer\parseargdef\appendix{\apphead0{#1}} % normally calls appendixzzz +% \def\appendixzzz#1{% \global\secno=0 \global\subsecno=0 \global\subsubsecno=0 \global\advance\appendixno by 1 \gdef\chaplevelprefix{\appendixletter.}% \resetallfloatnos % - \def\appendixnum{\putwordAppendix\space \appendixletter}% - \message{\appendixnum}% + % \putwordAppendix can contain complex things in translations. + \toks0=\expandafter{\putwordAppendix}% + \message{\the\toks0 \space \appendixletter}% % \chapmacro{#1}{Yappendix}{\appendixletter}% % @@ -3915,9 +5170,6 @@ width0pt\relax} \fi \global\let\subsubsection = \appendixsubsubsec } -% @centerchap is like @unnumbered, but the heading is centered. -\outer\parseargdef\centerchap{{\unnumberedyyy{#1}}} - \outer\parseargdef\unnumbered{\unnmhead0{#1}} % normally unnmhead0 calls unnumberedzzz \def\unnumberedzzz#1{% \global\secno=0 \global\subsecno=0 \global\subsubsecno=0 @@ -3948,6 +5200,16 @@ width0pt\relax} \fi \global\let\subsubsection = \unnumberedsubsubsec } +% @centerchap is like @unnumbered, but the heading is centered. +\outer\parseargdef\centerchap{% + % Well, we could do the following in a group, but that would break + % an assumption that \chapmacro is called at the outermost level. + % Thus we are safer this way: --kasal, 24feb04 + \let\centerparametersmaybe = \centerparameters + \unnmhead0{#1}% + \let\centerparametersmaybe = \relax +} + % @top is like @unnumbered. \let\top\unnumbered @@ -4014,24 +5276,6 @@ width0pt\relax} \fi {\the\unnumberedno.\the\secno.\the\subsecno.\the\subsubsecno}% } -% These are variants which are not "outer", so they can appear in @ifinfo. -% Actually, they are now be obsolete; ordinary section commands should work. -\def\infotop{\parsearg\unnumberedzzz} -\def\infounnumbered{\parsearg\unnumberedzzz} -\def\infounnumberedsec{\parsearg\unnumberedseczzz} -\def\infounnumberedsubsec{\parsearg\unnumberedsubseczzz} -\def\infounnumberedsubsubsec{\parsearg\unnumberedsubsubseczzz} - -\def\infoappendix{\parsearg\appendixzzz} -\def\infoappendixsec{\parsearg\appendixseczzz} -\def\infoappendixsubsec{\parsearg\appendixsubseczzz} -\def\infoappendixsubsubsec{\parsearg\appendixsubsubseczzz} - -\def\infochapter{\parsearg\chapterzzz} -\def\infosection{\parsearg\sectionzzz} -\def\infosubsection{\parsearg\subsectionzzz} -\def\infosubsubsection{\parsearg\subsubsectionzzz} - % These macros control what the section commands do, according % to what kind of chapter we are in (ordinary, appendix, or unnumbered). % Define them by default for a numbered chapter. @@ -4049,7 +5293,6 @@ width0pt\relax} \fi % 3) Likewise, headings look best if no \parindent is used, and % if justification is not attempted. Hence \raggedright. - \def\majorheading{% {\advance\chapheadingskip by 10pt \chapbreak }% \parsearg\chapheadingzzz @@ -4058,8 +5301,8 @@ width0pt\relax} \fi \def\chapheading{\chapbreak \parsearg\chapheadingzzz} \def\chapheadingzzz#1{% {\chapfonts \vbox{\hyphenpenalty=10000\tolerance=5000 - \parindent=0pt\raggedright - \rm #1\hfill}}% + \parindent=0pt\ptexraggedright + \rmisbold #1\hfill}}% \bigskip \par\penalty 200\relax \suppressfirstparagraphindent } @@ -4079,8 +5322,6 @@ width0pt\relax} \fi %%% Args are the skip and penalty (usually negative) \def\dobreak#1#2{\par\ifdim\lastskip<#1\removelastskip\penalty#2\vskip#1\fi} -\def\setchapterstyle #1 {\csname CHAPF#1\endcsname} - %%% Define plain chapter starts, and page on/off switching for it % Parameter controlling skip before chapter headings (if needed) @@ -4088,7 +5329,20 @@ width0pt\relax} \fi \def\chapbreak{\dobreak \chapheadingskip {-4000}} \def\chappager{\par\vfill\supereject} -\def\chapoddpage{\chappager \ifodd\pageno \else \hbox to 0pt{} \chappager\fi} +% Because \domark is called before \chapoddpage, the filler page will +% get the headings for the next chapter, which is wrong. But we don't +% care -- we just disable all headings on the filler page. +\def\chapoddpage{% + \chappager + \ifodd\pageno \else + \begingroup + \evenheadline={\hfil}\evenfootline={\hfil}% + \oddheadline={\hfil}\oddfootline={\hfil}% + \hbox to 0pt{}% + \chappager + \endgroup + \fi +} \def\setchapternewpage #1 {\csname CHAPPAG#1\endcsname} @@ -4111,56 +5365,89 @@ width0pt\relax} \fi \CHAPPAGon -\def\CHAPFplain{% -\global\let\chapmacro=\chfplain -\global\let\centerchapmacro=\centerchfplain} - -% Normal chapter opening. -% +% Chapter opening. +% % #1 is the text, #2 is the section type (Ynumbered, Ynothing, % Yappendix, Yomitfromtoc), #3 the chapter number. -% +% % To test against our argument. \def\Ynothingkeyword{Ynothing} \def\Yomitfromtockeyword{Yomitfromtoc} \def\Yappendixkeyword{Yappendix} % -\def\chfplain#1#2#3{% +\def\chapmacro#1#2#3{% + % Insert the first mark before the heading break (see notes for \domark). + \let\prevchapterdefs=\lastchapterdefs + \let\prevsectiondefs=\lastsectiondefs + \gdef\lastsectiondefs{\gdef\thissectionname{}\gdef\thissectionnum{}% + \gdef\thissection{}}% + % + \def\temptype{#2}% + \ifx\temptype\Ynothingkeyword + \gdef\lastchapterdefs{\gdef\thischaptername{#1}\gdef\thischapternum{}% + \gdef\thischapter{\thischaptername}}% + \else\ifx\temptype\Yomitfromtockeyword + \gdef\lastchapterdefs{\gdef\thischaptername{#1}\gdef\thischapternum{}% + \gdef\thischapter{}}% + \else\ifx\temptype\Yappendixkeyword + \toks0={#1}% + \xdef\lastchapterdefs{% + \gdef\noexpand\thischaptername{\the\toks0}% + \gdef\noexpand\thischapternum{\appendixletter}% + % \noexpand\putwordAppendix avoids expanding indigestible + % commands in some of the translations. + \gdef\noexpand\thischapter{\noexpand\putwordAppendix{} + \noexpand\thischapternum: + \noexpand\thischaptername}% + }% + \else + \toks0={#1}% + \xdef\lastchapterdefs{% + \gdef\noexpand\thischaptername{\the\toks0}% + \gdef\noexpand\thischapternum{\the\chapno}% + % \noexpand\putwordChapter avoids expanding indigestible + % commands in some of the translations. + \gdef\noexpand\thischapter{\noexpand\putwordChapter{} + \noexpand\thischapternum: + \noexpand\thischaptername}% + }% + \fi\fi\fi + % + % Output the mark. Pass it through \safewhatsit, to take care of + % the preceding space. + \safewhatsit\domark + % + % Insert the chapter heading break. \pchapsepmacro + % + % Now the second mark, after the heading break. No break points + % between here and the heading. + \let\prevchapterdefs=\lastchapterdefs + \let\prevsectiondefs=\lastsectiondefs + \domark + % {% - \chapfonts \rm + \chapfonts \rmisbold % - % Have to define \thissection before calling \donoderef, because the + % Have to define \lastsection before calling \donoderef, because the % xref code eventually uses it. On the other hand, it has to be called % after \pchapsepmacro, or the headline will change too soon. - \gdef\thissection{#1}% - \gdef\thischaptername{#1}% + \gdef\lastsection{#1}% % % Only insert the separating space if we have a chapter/appendix % number, and don't print the unnumbered ``number''. - \def\temptype{#2}% \ifx\temptype\Ynothingkeyword \setbox0 = \hbox{}% \def\toctype{unnchap}% - \def\thischapter{#1}% \else\ifx\temptype\Yomitfromtockeyword \setbox0 = \hbox{}% contents like unnumbered, but no toc entry \def\toctype{omit}% - \xdef\thischapter{}% \else\ifx\temptype\Yappendixkeyword \setbox0 = \hbox{\putwordAppendix{} #3\enspace}% \def\toctype{app}% - % We don't substitute the actual chapter name into \thischapter - % because we don't want its macros evaluated now. And we don't - % use \thissection because that changes with each section. - % - \xdef\thischapter{\putwordAppendix{} \appendixletter: - \noexpand\thischaptername}% \else \setbox0 = \hbox{#3\enspace}% \def\toctype{numchap}% - \xdef\thischapter{\putwordChapter{} \the\chapno: - \noexpand\thischaptername}% \fi\fi\fi % % Write the toc entry for this chapter. Must come before the @@ -4176,7 +5463,8 @@ width0pt\relax} \fi \donoderef{#2}% % % Typeset the actual heading. - \vbox{\hyphenpenalty=10000 \tolerance=5000 \parindent=0pt \raggedright + \nobreak % Avoid page breaks at the interline glue. + \vbox{\hyphenpenalty=10000 \tolerance=5000 \parindent=0pt \ptexraggedright \hangindent=\wd0 \centerparametersmaybe \unhbox0 #1\par}% }% @@ -4186,45 +5474,40 @@ width0pt\relax} \fi % @centerchap -- centered and unnumbered. \let\centerparametersmaybe = \relax -\def\centerchfplain#1{{% - \def\centerparametersmaybe{% - \advance\rightskip by 3\rightskip - \leftskip = \rightskip - \parfillskip = 0pt - }% - \chfplain{#1}{Ynothing}{}% -}} +\def\centerparameters{% + \advance\rightskip by 3\rightskip + \leftskip = \rightskip + \parfillskip = 0pt +} -\CHAPFplain % The default % I don't think this chapter style is supported any more, so I'm not % updating it with the new noderef stuff. We'll see. --karl, 11aug03. -% +% +\def\setchapterstyle #1 {\csname CHAPF#1\endcsname} +% \def\unnchfopen #1{% \chapoddpage {\chapfonts \vbox{\hyphenpenalty=10000\tolerance=5000 - \parindent=0pt\raggedright - \rm #1\hfill}}\bigskip \par\nobreak + \parindent=0pt\ptexraggedright + \rmisbold #1\hfill}}\bigskip \par\nobreak } - \def\chfopen #1#2{\chapoddpage {\chapfonts \vbox to 3in{\vfil \hbox to\hsize{\hfil #2} \hbox to\hsize{\hfil #1} \vfil}}% \par\penalty 5000 % } - \def\centerchfopen #1{% \chapoddpage {\chapfonts \vbox{\hyphenpenalty=10000\tolerance=5000 \parindent=0pt - \hfill {\rm #1}\hfill}}\bigskip \par\nobreak + \hfill {\rmisbold #1}\hfill}}\bigskip \par\nobreak } - \def\CHAPFopen{% -\global\let\chapmacro=\chfopen -\global\let\centerchapmacro=\centerchfopen} + \global\let\chapmacro=\chfopen + \global\let\centerchapmacro=\centerchfopen} % Section titles. These macros combine the section number parts and % call the generic \sectionheading to do the printing. -% +% \newskip\secheadingskip \def\secheadingbreak{\dobreak \secheadingskip{-1000}} @@ -4238,52 +5521,113 @@ width0pt\relax} \fi % Print any size, any type, section title. -% +% % #1 is the text, #2 is the section level (sec/subsec/subsubsec), #3 is % the section type for xrefs (Ynumbered, Ynothing, Yappendix), #4 is the % section number. -% +% +\def\seckeyword{sec} +% \def\sectionheading#1#2#3#4{% {% % Switch to the right set of fonts. - \csname #2fonts\endcsname \rm + \csname #2fonts\endcsname \rmisbold + % + \def\sectionlevel{#2}% + \def\temptype{#3}% + % + % Insert first mark before the heading break (see notes for \domark). + \let\prevsectiondefs=\lastsectiondefs + \ifx\temptype\Ynothingkeyword + \ifx\sectionlevel\seckeyword + \gdef\lastsectiondefs{\gdef\thissectionname{#1}\gdef\thissectionnum{}% + \gdef\thissection{\thissectionname}}% + \fi + \else\ifx\temptype\Yomitfromtockeyword + % Don't redefine \thissection. + \else\ifx\temptype\Yappendixkeyword + \ifx\sectionlevel\seckeyword + \toks0={#1}% + \xdef\lastsectiondefs{% + \gdef\noexpand\thissectionname{\the\toks0}% + \gdef\noexpand\thissectionnum{#4}% + % \noexpand\putwordSection avoids expanding indigestible + % commands in some of the translations. + \gdef\noexpand\thissection{\noexpand\putwordSection{} + \noexpand\thissectionnum: + \noexpand\thissectionname}% + }% + \fi + \else + \ifx\sectionlevel\seckeyword + \toks0={#1}% + \xdef\lastsectiondefs{% + \gdef\noexpand\thissectionname{\the\toks0}% + \gdef\noexpand\thissectionnum{#4}% + % \noexpand\putwordSection avoids expanding indigestible + % commands in some of the translations. + \gdef\noexpand\thissection{\noexpand\putwordSection{} + \noexpand\thissectionnum: + \noexpand\thissectionname}% + }% + \fi + \fi\fi\fi + % + % Go into vertical mode. Usually we'll already be there, but we + % don't want the following whatsit to end up in a preceding paragraph + % if the document didn't happen to have a blank line. + \par + % + % Output the mark. Pass it through \safewhatsit, to take care of + % the preceding space. + \safewhatsit\domark % % Insert space above the heading. \csname #2headingbreak\endcsname % - % Only insert the space after the number if we have a section number. - \def\sectionlevel{#2}% - \def\temptype{#3}% + % Now the second mark, after the heading break. No break points + % between here and the heading. + \let\prevsectiondefs=\lastsectiondefs + \domark % + % Only insert the space after the number if we have a section number. \ifx\temptype\Ynothingkeyword \setbox0 = \hbox{}% \def\toctype{unn}% - \gdef\thissection{#1}% + \gdef\lastsection{#1}% \else\ifx\temptype\Yomitfromtockeyword % for @headings -- no section number, don't include in toc, - % and don't redefine \thissection. + % and don't redefine \lastsection. \setbox0 = \hbox{}% \def\toctype{omit}% \let\sectionlevel=\empty \else\ifx\temptype\Yappendixkeyword \setbox0 = \hbox{#4\enspace}% \def\toctype{app}% - \gdef\thissection{#1}% + \gdef\lastsection{#1}% \else \setbox0 = \hbox{#4\enspace}% \def\toctype{num}% - \gdef\thissection{#1}% + \gdef\lastsection{#1}% \fi\fi\fi % - % Write the toc entry (before \donoderef). See comments in \chfplain. + % Write the toc entry (before \donoderef). See comments in \chapmacro. \writetocentry{\toctype\sectionlevel}{#1}{#4}% % % Write the node reference (= pdf destination for pdftex). - % Again, see comments in \chfplain. + % Again, see comments in \chapmacro. \donoderef{#3}% % + % Interline glue will be inserted when the vbox is completed. + % That glue will be a valid breakpoint for the page, since it'll be + % preceded by a whatsit (usually from the \donoderef, or from the + % \writetocentry if there was no node). We don't want to allow that + % break, since then the whatsits could end up on page n while the + % section is on page n+1, thus toc/etc. are wrong. Debian bug 276000. + \nobreak + % % Output the actual section heading. - \vbox{\hyphenpenalty=10000 \tolerance=5000 \parindent=0pt \raggedright + \vbox{\hyphenpenalty=10000 \tolerance=5000 \parindent=0pt \ptexraggedright \hangindent=\wd0 % zero if no section number \unhbox0 #1}% }% @@ -4300,13 +5644,13 @@ width0pt\relax} \fi % discardable item.) \vskip-\parskip % - % This \nobreak is purely so the last item on the list is a \penalty - % of 10000. This is so other code, for instance \parsebodycommon, can - % check for and avoid allowing breakpoints. Otherwise, it would - % insert a valid breakpoint between: + % This is purely so the last item on the list is a known \penalty > + % 10000. This is so \startdefun can avoid allowing breakpoints after + % section headings. Otherwise, it would insert a valid breakpoint between: + % % @section sec-whatever % @deffn def-whatever - \nobreak + \penalty 10001 } @@ -4315,14 +5659,14 @@ width0pt\relax} \fi \newwrite\tocfile % Write an entry to the toc file, opening it if necessary. -% Called from @chapter, etc. -% +% Called from @chapter, etc. +% % Example usage: \writetocentry{sec}{Section Name}{\the\chapno.\the\secno} % We append the current node name (if any) and page number as additional % arguments for the \{chap,sec,...}entry macros which will eventually % read this. The node name is used in the pdf outlines as the % destination to jump to. -% +% % We open the .toc file for writing here instead of at @setfilename (or % any other fixed time) so that @contents can be anywhere in the document. % But if #1 is `omit', then we don't do anything. This is used for the @@ -4340,11 +5684,11 @@ width0pt\relax} \fi \fi % \iflinks - \toks0 = {#2}% - \toks2 = \expandafter{\lastnode}% - \edef\temp{\write\tocfile{\realbackslash #1entry{\the\toks0}{#3}% - {\the\toks2}{\noexpand\folio}}}% - \temp + {\atdummies + \edef\temp{% + \write\tocfile{@#1entry{#2}{#3}{\lastnode}{\noexpand\folio}}}% + \temp + }% \fi \fi % @@ -4357,6 +5701,31 @@ width0pt\relax} \fi \ifpdf \global\pdfmakepagedesttrue \fi } + +% These characters do not print properly in the Computer Modern roman +% fonts, so we must take special care. This is more or less redundant +% with the Texinfo input format setup at the end of this file. +% +\def\activecatcodes{% + \catcode`\"=\active + \catcode`\$=\active + \catcode`\<=\active + \catcode`\>=\active + \catcode`\\=\active + \catcode`\^=\active + \catcode`\_=\active + \catcode`\|=\active + \catcode`\~=\active +} + + +% Read the toc file, which is essentially Texinfo input. +\def\readtocfile{% + \setupdatafile + \activecatcodes + \input \tocreadfilename +} + \newskip\contentsrightmargin \contentsrightmargin=1in \newcount\savepageno \newcount\lastnegativepageno \lastnegativepageno = -1 @@ -4373,29 +5742,29 @@ width0pt\relax} \fi % % Don't need to put `Contents' or `Short Contents' in the headline. % It is abundantly clear what they are. - \def\thischapter{}% \chapmacro{#1}{Yomitfromtoc}{}% % \savepageno = \pageno \begingroup % Set up to handle contents files properly. - \catcode`\\=0 \catcode`\{=1 \catcode`\}=2 \catcode`\@=11 - % We can't do this, because then an actual ^ in a section - % title fails, e.g., @chapter ^ -- exponentiation. --karl, 9jul97. - %\catcode`\^=7 % to see ^^e4 as \"a etc. juha@piuha.ydi.vtt.fi - \raggedbottom % Worry more about breakpoints than the bottom. + \raggedbottom % Worry more about breakpoints than the bottom. \advance\hsize by -\contentsrightmargin % Don't use the full line length. % % Roman numerals for page numbers. \ifnum \pageno>0 \global\pageno = \lastnegativepageno \fi } +% redefined for the two-volume lispref. We always output on +% \jobname.toc even if this is redefined. +% +\def\tocreadfilename{\jobname.toc} % Normal (long) toc. +% \def\contents{% \startcontents{\putwordTOC}% - \openin 1 \jobname.toc + \openin 1 \tocreadfilename\space \ifeof 1 \else - \input \jobname.toc + \readtocfile \fi \vfill \eject \contentsalignmacro % in case @setchapternewpage odd is in effect @@ -4431,9 +5800,9 @@ width0pt\relax} \fi \let\numsubsubsecentry = \numsecentry \let\appsubsubsecentry = \numsecentry \let\unnsubsubsecentry = \numsecentry - \openin 1 \jobname.toc + \openin 1 \tocreadfilename\space \ifeof 1 \else - \input \jobname.toc + \readtocfile \fi \closein 1 \vfill \eject @@ -4453,7 +5822,7 @@ width0pt\relax} \fi % But use \hss just in case. % (This space doesn't include the extra space that gets added after % the label; that gets put in by \shortchapentry above.) - % + % % We'd like to right-justify chapter numbers, but that looks strange % with appendix letters. And right-justifying numbers and % left-justifying letters looks strange when there is less than 10 @@ -4478,7 +5847,7 @@ width0pt\relax} \fi % Appendices, in the main contents. % Need the word Appendix, and a fixed-size box. -% +% \def\appendixbox#1{% % We use M since it's probably the widest letter. \setbox0 = \hbox{\putwordAppendix{} M}% @@ -4556,45 +5925,12 @@ width0pt\relax} \fi \message{environments,} % @foo ... @end foo. -% @point{}, @result{}, @expansion{}, @print{}, @equiv{}. -% -% Since these characters are used in examples, it should be an even number of -% \tt widths. Each \tt character is 1en, so two makes it 1em. -% -\def\point{$\star$} -\def\result{\leavevmode\raise.15ex\hbox to 1em{\hfil$\Rightarrow$\hfil}} -\def\expansion{\leavevmode\raise.1ex\hbox to 1em{\hfil$\mapsto$\hfil}} -\def\print{\leavevmode\lower.1ex\hbox to 1em{\hfil$\dashv$\hfil}} -\def\equiv{\leavevmode\lower.1ex\hbox to 1em{\hfil$\ptexequiv$\hfil}} - -% The @error{} command. -% Adapted from the TeXbook's \boxit. -% -\newbox\errorbox -% -{\tentt \global\dimen0 = 3em}% Width of the box. -\dimen2 = .55pt % Thickness of rules -% The text. (`r' is open on the right, `e' somewhat less so on the left.) -\setbox0 = \hbox{\kern-.75pt \tensf error\kern-1.5pt} -% -\setbox\errorbox=\hbox to \dimen0{\hfil - \hsize = \dimen0 \advance\hsize by -5.8pt % Space to left+right. - \advance\hsize by -2\dimen2 % Rules. - \vbox{% - \hrule height\dimen2 - \hbox{\vrule width\dimen2 \kern3pt % Space to left of text. - \vtop{\kern2.4pt \box0 \kern2.4pt}% Space above/below. - \kern3pt\vrule width\dimen2}% Space to right. - \hrule height\dimen2} - \hfil} -% -\def\error{\leavevmode\lower.7ex\copy\errorbox} - % @tex ... @end tex escapes into raw Tex temporarily. % One exception: @ is still an escape character, so that @end tex works. % But \@ or @@ will get a plain tex @ character. \envdef\tex{% + \setupmarkupstyle{tex}% \catcode `\\=0 \catcode `\{=1 \catcode `\}=2 \catcode `\$=3 \catcode `\&=4 \catcode `\#=6 \catcode `\^=7 \catcode `\_=8 \catcode `\~=\active \let~=\tie @@ -4604,6 +5940,8 @@ width0pt\relax} \fi \catcode `\|=\other \catcode `\<=\other \catcode `\>=\other + \catcode`\`=\other + \catcode`\'=\other \escapechar=`\\ % \let\b=\ptexb @@ -4623,6 +5961,8 @@ width0pt\relax} \fi \let\/=\ptexslash \let\*=\ptexstar \let\t=\ptext + \expandafter \let\csname top\endcsname=\ptextop % outer + \let\frenchspacing=\plainfrenchspacing % \def\endldots{\mathinner{\ldots\ldots\ldots\ldots}}% \def\enddots{\relax\ifmmode\endldots\else$\mathsurround=0pt \endldots\,$\fi}% @@ -4651,7 +5991,8 @@ width0pt\relax} \fi % start of the next paragraph will insert \parskip. % \def\aboveenvbreak{{% - % =10000 instead of <10000 because of a special case in \itemzzz, q.v. + % =10000 instead of <10000 because of a special case in \itemzzz and + % \sectionheading, q.v. \ifnum \lastpenalty=10000 \else \advance\envskipamount by \parskip \endgraf @@ -4667,7 +6008,8 @@ width0pt\relax} \fi \let\afterenvbreak = \aboveenvbreak -% \nonarrowing is a flag. If "set", @lisp etc don't narrow margins. +% \nonarrowing is a flag. If "set", @lisp etc don't narrow margins; it will +% also clear it, so that its embedded environments do the narrowing again. \let\nonarrowing=\relax % @cartouche ... @end cartouche: draw rectangle w/rounded corners around @@ -4704,7 +6046,7 @@ width0pt\relax} \fi % each corner char, and rule thickness \normbskip=\baselineskip \normpskip=\parskip \normlskip=\lineskip % Flag to tell @lisp, etc., not to narrow margin. - \let\nonarrowing=\comment + \let\nonarrowing = t% \vbox\bgroup \baselineskip=0pt\parskip=0pt\lineskip=0pt \carttop @@ -4735,6 +6077,7 @@ width0pt\relax} \fi % This macro is called at the beginning of all the @example variants, % inside a group. +\newdimen\nonfillparindent \def\nonfillstart{% \aboveenvbreak \hfuzz = 12pt % Don't be fussy @@ -4742,17 +6085,40 @@ width0pt\relax} \fi \let\par = \lisppar % don't ignore blank lines \obeylines % each line of input is a line of output \parskip = 0pt + % Turn off paragraph indentation but redefine \indent to emulate + % the normal \indent. + \nonfillparindent=\parindent \parindent = 0pt + \let\indent\nonfillindent + % \emergencystretch = 0pt % don't try to avoid overfull boxes - % @cartouche defines \nonarrowing to inhibit narrowing - % at next level down. \ifx\nonarrowing\relax \advance \leftskip by \lispnarrowing \exdentamount=\lispnarrowing + \else + \let\nonarrowing = \relax \fi \let\exdent=\nofillexdent } +\begingroup +\obeyspaces +% We want to swallow spaces (but not other tokens) after the fake +% @indent in our nonfill-environments, where spaces are normally +% active and set to @tie, resulting in them not being ignored after +% @indent. +\gdef\nonfillindent{\futurelet\temp\nonfillindentcheck}% +\gdef\nonfillindentcheck{% +\ifx\temp % +\expandafter\nonfillindentgobble% +\else% +\leavevmode\nonfillindentbox% +\fi% +}% +\endgroup +\def\nonfillindentgobble#1{\nonfillindent} +\def\nonfillindentbox{\hbox to \nonfillparindent{\hss}} + % If you want all examples etc. small: @set dispenvsize small. % If you want even small examples the full size: @set dispenvsize nosmall. % This affects the following displayed environments: @@ -4763,12 +6129,18 @@ width0pt\relax} \fi \let\SETdispenvsize\relax \def\setnormaldispenv{% \ifx\SETdispenvsize\smallword + % end paragraph for sake of leading, in case document has no blank + % line. This is redundant with what happens in \aboveenvbreak, but + % we need to do it before changing the fonts, and it's inconvenient + % to change the fonts afterward. + \ifnum \lastpenalty=10000 \else \endgraf \fi \smallexamplefonts \rm \fi } \def\setsmalldispenv{% \ifx\SETdispenvsize\nosmallword \else + \ifnum \lastpenalty=10000 \else \endgraf \fi \smallexamplefonts \rm \fi } @@ -4795,11 +6167,10 @@ width0pt\relax} \fi % \maketwodispenvs {lisp}{example}{% \nonfillstart - \tt + \tt\setupmarkupstyle{example}% \let\kbdfont = \kbdexamplefont % Allow @kbd to do something special. \gobble % eat return } - % @display/@smalldisplay: same as @lisp except keep current font. % \makedispenv {display}{% @@ -4834,12 +6205,36 @@ width0pt\relax} \fi \let\Eflushright = \afterenvbreak +% @raggedright does more-or-less normal line breaking but no right +% justification. From plain.tex. +\envdef\raggedright{% + \rightskip0pt plus2em \spaceskip.3333em \xspaceskip.5em\relax +} +\let\Eraggedright\par + +\envdef\raggedleft{% + \parindent=0pt \leftskip0pt plus2em + \spaceskip.3333em \xspaceskip.5em \parfillskip=0pt + \hbadness=10000 % Last line will usually be underfull, so turn off + % badness reporting. +} +\let\Eraggedleft\par + +\envdef\raggedcenter{% + \parindent=0pt \rightskip0pt plus1em \leftskip0pt plus1em + \spaceskip.3333em \xspaceskip.5em \parfillskip=0pt + \hbadness=10000 % Last line will usually be underfull, so turn off + % badness reporting. +} +\let\Eraggedcenter\par + + % @quotation does normal linebreaking (hence we can't use \nonfillstart) % and narrows the margins. We keep \parskip nonzero in general, since % we're doing normal filling. So, when using \aboveenvbreak and % \afterenvbreak, temporarily make \parskip 0. % -\envdef\quotation{% +\def\quotationstart{% {\parskip=0pt \aboveenvbreak}% because \aboveenvbreak inserts \parskip \parindent=0pt % @@ -4848,14 +6243,26 @@ width0pt\relax} \fi \advance\leftskip by \lispnarrowing \advance\rightskip by \lispnarrowing \exdentamount = \lispnarrowing + \else \let\nonarrowing = \relax \fi \parsearg\quotationlabel } +\envdef\quotation{% + \setnormaldispenv + \quotationstart +} + +\envdef\smallquotation{% + \setsmalldispenv + \quotationstart +} +\let\Esmallquotation = \Equotation + % We have retained a nonzero parskip for the environment, since we're % doing normal filling. -% +% \def\Equotation{% \par \ifx\quotationauthor\undefined\else @@ -4888,18 +6295,16 @@ width0pt\relax} \fi \do\ \do\\\do\{\do\}\do\$\do\&% \do\#\do\^\do\^^K\do\_\do\^^A\do\%\do\~% \do\<\do\>\do\|\do\@\do+\do\"% + % Don't do the quotes -- if we do, @set txicodequoteundirected and + % @set txicodequotebacktick will not have effect on @verb and + % @verbatim, and ?` and !` ligatures won't get disabled. + %\do\`\do\'% } % % [Knuth] p. 380 \def\uncatcodespecials{% \def\do##1{\catcode`##1=\other}\dospecials} % -% [Knuth] pp. 380,381,391 -% Disable Spanish ligatures ?` and !` of \tt font -\begingroup - \catcode`\`=\active\gdef`{\relax\lq} -\endgroup -% % Setup for the @verb command. % % Eight spaces for a tab @@ -4911,7 +6316,7 @@ width0pt\relax} \fi \def\setupverb{% \tt % easiest (and conventionally used) font for verbatim \def\par{\leavevmode\endgraf}% - \catcode`\`=\active + \setupmarkupstyle{verb}% \tabeightspaces % Respect line breaks, % print special symbols as themselves, and @@ -4926,6 +6331,7 @@ width0pt\relax} \fi \newdimen\tabw \setbox0=\hbox{\tt\space} \tabw=8\wd0 % tab amount % \def\starttabbox{\setbox0=\hbox\bgroup} +% \begingroup \catcode`\^^I=\active \gdef\tabexpand{% @@ -4939,14 +6345,16 @@ width0pt\relax} \fi }% } \endgroup + +% start the verbatim environment. \def\setupverbatim{% + \let\nonarrowing = t% \nonfillstart - \advance\leftskip by -\defbodyindent % Easiest (and conventionally used) font for verbatim \tt \def\par{\leavevmode\egroup\box0\endgraf}% - \catcode`\`=\active \tabexpand + \setupmarkupstyle{verbatim}% % Respect line breaks, % print special symbols as themselves, and % make each space count @@ -5006,14 +6414,14 @@ width0pt\relax} \fi {% \makevalueexpandable \setupverbatim + \indexnofonts % Allow `@@' and other weird things in file names. \input #1 \afterenvbreak }% } % @copying ... @end copying. -% Save the text away for @insertcopying later. Many commands won't be -% allowed in this context, but that's ok. +% Save the text away for @insertcopying later. % % We save the uninterpreted tokens, rather than creating a box. % Saving the text in a box would be much easier, but then all the @@ -5022,84 +6430,45 @@ width0pt\relax} \fi % file; b) letting users define the frontmatter in as flexible order as % possible is very desirable. % -\def\copying{\begingroup - % Define a command to swallow text until we reach `@end copying'. - % \ is the escape char in this texinfo.tex file, so it is the - % delimiter for the command; @ will be the escape char when we read - % it, but that doesn't matter. - \long\def\docopying##1\end copying{\gdef\copyingtext{##1}\enddocopying}% - % - % We must preserve ^^M's in the input file; see \insertcopying below. - \catcode`\^^M = \active - \docopying -} - -% What we do to finish off the copying text. -% -\def\enddocopying{\endgroup\ignorespaces} - -% @insertcopying. Here we must play games with ^^M's. On the one hand, -% we need them to delimit commands such as `@end quotation', so they -% must be active. On the other hand, we certainly don't want every -% end-of-line to be a \par, as would happen with the normal active -% definition of ^^M. On the third hand, two ^^M's in a row should still -% generate a \par. -% -% Our approach is to make ^^M insert a space and a penalty1 normally; -% then it can also check if \lastpenalty=1. If it does, then manually -% do \par. -% -% This messes up the normal definitions of @c[omment], so we redefine -% it. Similarly for @ignore. (These commands are used in the gcc -% manual for man page generation.) -% -% Seems pretty fragile, most line-oriented commands will presumably -% fail, but for the limited use of getting the copying text (which -% should be quite simple) inserted, we can hope it's ok. -% -{\catcode`\^^M=\active % -\gdef\insertcopying{\begingroup % - \parindent = 0pt % looks wrong on title page - \def^^M{% - \ifnum \lastpenalty=1 % - \par % - \else % - \space \penalty 1 % - \fi % - }% - % - % Fix @c[omment] for catcode 13 ^^M's. - \def\c##1^^M{\ignorespaces}% - \let\comment = \c % - % - % Don't bother jumping through all the hoops that \doignore does, it - % would be very hard since the catcodes are already set. - \long\def\ignore##1\end ignore{\ignorespaces}% - % - \copyingtext % -\endgroup}% +\def\copying{\checkenv{}\begingroup\scanargctxt\docopying} +\def\docopying#1@end copying{\endgroup\def\copyingtext{#1}} +% +\def\insertcopying{% + \begingroup + \parindent = 0pt % paragraph indentation looks wrong on title page + \scanexp\copyingtext + \endgroup } + \message{defuns,} % @defun etc. \newskip\defbodyindent \defbodyindent=.4in \newskip\defargsindent \defargsindent=50pt \newskip\deflastargmargin \deflastargmargin=18pt +\newcount\defunpenalty % Start the processing of @deffn: \def\startdefun{% \ifnum\lastpenalty<10000 \medbreak + \defunpenalty=10003 % Will keep this @deffn together with the + % following @def command, see below. \else % If there are two @def commands in a row, we'll have a \nobreak, % which is there to keep the function description together with its % header. But if there's nothing but headers, we need to allow a - % break somewhere. Check for penalty 10002 (inserted by - % \defargscommonending) instead of 10000, since the sectioning - % commands insert a \penalty10000, and we don't want to allow a break - % between a section heading and a defun. - \ifnum\lastpenalty=10002 \penalty2000 \fi + % break somewhere. Check specifically for penalty 10002, inserted + % by \printdefunline, instead of 10000, since the sectioning + % commands also insert a nobreak penalty, and we don't want to allow + % a break between a section heading and a defun. + % + % As a minor refinement, we avoid "club" headers by signalling + % with penalty of 10003 after the very first @deffn in the + % sequence (see above), and penalty of 10002 after any following + % @def command. + \ifnum\lastpenalty=10002 \penalty2000 \else \defunpenalty=10002 \fi % % Similarly, after a section heading, do not allow a break. % But do insert the glue. @@ -5117,7 +6486,7 @@ width0pt\relax} \fi % % As above, allow line break if we have multiple x headers in a row. % It's not a great place, though. - \ifnum\lastpenalty=10002 \penalty3000 \fi + \ifnum\lastpenalty=10002 \penalty3000 \else \defunpenalty=10002 \fi % % And now, it's time to reuse the body of the original defun: \expandafter\gobbledefun#1% @@ -5135,7 +6504,7 @@ width0pt\relax} \fi \advance\rightskip by 0pt plus 1fil \endgraf \nobreak\vskip -\parskip - \penalty 10002 % signal to \startdefun and \dodefunx + \penalty\defunpenalty % signal to \startdefun and \dodefunx % Some of the @defun-type tags do not enable magic parentheses, % rendering the following check redundant. But we don't optimize. \checkparencounts @@ -5145,7 +6514,7 @@ width0pt\relax} \fi \def\Edefun{\endgraf\medbreak} % \makedefun{deffn} creates \deffn, \deffnx and \Edeffn; -% the only thing remainnig is to define \deffnheader. +% the only thing remaining is to define \deffnheader. % \def\makedefun#1{% \expandafter\let\csname E#1\endcsname = \Edefun @@ -5258,7 +6627,7 @@ width0pt\relax} \fi % #1 is the category, such as "Function". % #2 is the return type, if any. % #3 is the function name. -% +% % We are followed by (but not passed) the arguments, if any. % \def\defname#1#2#3{% @@ -5316,15 +6685,15 @@ width0pt\relax} \fi % tt for the name. This is because literal text is sometimes needed in % the argument list (groff manual), and ttsl and tt are not very % distinguishable. Prevent hyphenation at `-' chars. -% +% \def\defunargs#1{% - % use sl by default (not ttsl), + % use sl by default (not ttsl), % tt for the names. \df \sl \hyphenchar\font=0 % % On the other hand, if an argument has two dashes (for instance), we % want a way to get ttsl. Let's try @var for that. - \let\var=\ttslanted + \def\var##1{{\setupmarkupstyle{var}\ttslanted{##1}}}% #1% \sl\hyphenchar\font=45 } @@ -5404,12 +6773,14 @@ width0pt\relax} \fi \ifnum\parencount=0 \else \badparencount \fi \ifnum\brackcount=0 \else \badbrackcount \fi } +% these should not use \errmessage; the glibc manual, at least, actually +% has such constructs (when documenting function pointers). \def\badparencount{% - \errmessage{Unbalanced parentheses in @def}% + \message{Warning: unbalanced parentheses in @def...}% \global\parencount=0 } \def\badbrackcount{% - \errmessage{Unbalanced square braces in @def}% + \message{Warning: unbalanced square brackets in @def...}% \global\brackcount=0 } @@ -5422,7 +6793,7 @@ width0pt\relax} \fi \ifx\eTeXversion\undefined \newwrite\macscribble \def\scantokens#1{% - \toks0={#1\endinput}% + \toks0={#1}% \immediate\openout\macscribble=\jobname.tmp \immediate\write\macscribble{\the\toks0}% \immediate\closeout\macscribble @@ -5435,32 +6806,53 @@ width0pt\relax} \fi \newlinechar`\^^M \let\xeatspaces\eatspaces % Undo catcode changes of \startcontents and \doprintindex - \catcode`\@=0 \catcode`\\=\other \escapechar=`\@ + % When called from @insertcopying or (short)caption, we need active + % backslash to get it printed correctly. Previously, we had + % \catcode`\\=\other instead. We'll see whether a problem appears + % with macro expansion. --kasal, 19aug04 + \catcode`\@=0 \catcode`\\=\active \escapechar=`\@ % ... and \example \spaceisspace % % Append \endinput to make sure that TeX does not see the ending newline. - % % I've verified that it is necessary both for e-TeX and for ordinary TeX % --kasal, 29nov03 \scantokens{#1\endinput}% \endgroup } +\def\scanexp#1{% + \edef\temp{\noexpand\scanmacro{#1}}% + \temp +} + \newcount\paramno % Count of parameters \newtoks\macname % Macro name \newif\ifrecursive % Is it recursive? -\def\macrolist{} % List of all defined macros in the form - % \do\macro1\do\macro2... + +% List of all defined macros in the form +% \definedummyword\macro1\definedummyword\macro2... +% Currently is also contains all @aliases; the list can be split +% if there is a need. +\def\macrolist{} + +% Add the macro to \macrolist +\def\addtomacrolist#1{\expandafter \addtomacrolistxxx \csname#1\endcsname} +\def\addtomacrolistxxx#1{% + \toks0 = \expandafter{\macrolist\definedummyword#1}% + \xdef\macrolist{\the\toks0}% +} % Utility routines. -% This does \let #1 = #2, except with \csnames. +% This does \let #1 = #2, with \csnames; that is, +% \let \csname#1\endcsname = \csname#2\endcsname +% (except of course we have to play expansion games). +% \def\cslet#1#2{% -\expandafter\expandafter -\expandafter\let -\expandafter\expandafter -\csname#1\endcsname -\csname#2\endcsname} + \expandafter\let + \csname#1\expandafter\endcsname + \csname#2\endcsname +} % Trim leading and trailing spaces off a string. % Concepts from aro-bend problem 15 (see CTAN). @@ -5483,34 +6875,45 @@ width0pt\relax} \fi % all characters are catcode 10, 11 or 12, except \ which is active % (as in normal texinfo). It is necessary to change the definition of \. +% Non-ASCII encodings make 8-bit characters active, so un-activate +% them to avoid their expansion. Must do this non-globally, to +% confine the change to the current group. + % It's necessary to have hard CRs when the macro is executed. This is % done by making ^^M (\endlinechar) catcode 12 when reading the macro % body, and then making it the \newlinechar in \scanmacro. -\def\macrobodyctxt{% - \catcode`\~=\other +\def\scanctxt{% + \catcode`\"=\other + \catcode`\+=\other + \catcode`\<=\other + \catcode`\>=\other + \catcode`\@=\other \catcode`\^=\other \catcode`\_=\other \catcode`\|=\other - \catcode`\<=\other - \catcode`\>=\other - \catcode`\+=\other + \catcode`\~=\other + \ifx\declaredencoding\ascii \else \setnonasciicharscatcodenonglobal\other \fi +} + +\def\scanargctxt{% + \scanctxt + \catcode`\\=\other + \catcode`\^^M=\other +} + +\def\macrobodyctxt{% + \scanctxt \catcode`\{=\other \catcode`\}=\other - \catcode`\@=\other \catcode`\^^M=\other - \usembodybackslash} + \usembodybackslash +} \def\macroargctxt{% - \catcode`\~=\other - \catcode`\^=\other - \catcode`\_=\other - \catcode`\|=\other - \catcode`\<=\other - \catcode`\>=\other - \catcode`\+=\other - \catcode`\@=\other - \catcode`\\=\other} + \scanctxt + \catcode`\\=\other +} % \mbodybackslash is the definition of \ in @macro bodies. % It maps \foo\ => \csname macarg.foo\endcsname => #N @@ -5541,10 +6944,7 @@ width0pt\relax} \fi \else \errmessage{Macro name \the\macname\space already defined}\fi \global\cslet{macsave.\the\macname}{\the\macname}% \global\expandafter\let\csname ismacro.\the\macname\endcsname=1% - % Add the macroname to \macrolist - \toks0 = \expandafter{\macrolist\do}% - \xdef\macrolist{\the\toks0 - \expandafter\noexpand\csname\the\macname\endcsname}% + \addtomacrolist{\the\macname}% \fi \begingroup \macrobodyctxt \ifrecursive \expandafter\parsermacbody @@ -5558,7 +6958,7 @@ width0pt\relax} \fi % Remove the macro name from \macrolist: \begingroup \expandafter\let\csname#1\endcsname \relax - \let\do\unmacrodo + \let\definedummyword\unmacrodo \xdef\macrolist{\macrolist}% \endgroup \else @@ -5570,10 +6970,10 @@ width0pt\relax} \fi % macro definitions that have been changed to \relax. % \def\unmacrodo#1{% - \ifx#1\relax + \ifx #1\relax % remove this \else - \noexpand\do \noexpand #1% + \noexpand\definedummyword \noexpand#1% \fi } @@ -5686,16 +7086,11 @@ width0pt\relax} \fi % {. If so it reads up to the closing }, if not, it reads the whole % line. Whatever was read is then fed to the next control sequence % as an argument (by \parsebrace or \parsearg) -\def\braceorline#1{\let\next=#1\futurelet\nchar\braceorlinexxx} +\def\braceorline#1{\let\macnamexxx=#1\futurelet\nchar\braceorlinexxx} \def\braceorlinexxx{% \ifx\nchar\bgroup\else \expandafter\parsearg - \fi \next} - -% We mant to disable all macros during \shipout so that they are not -% expanded by \write. -\def\turnoffmacros{\begingroup \def\do##1{\let\noexpand##1=\relax}% - \edef\next{\macrolist}\expandafter\endgroup\next} + \fi \macnamexxx} % @alias. @@ -5706,6 +7101,7 @@ width0pt\relax} \fi \def\aliasyyy #1=#2\relax{% {% \expandafter\let\obeyedspace=\empty + \addtomacrolist{#1}% \xdef\next{\global\let\makecsname{#1}=\makecsname{#2}}% }% \next @@ -5715,7 +7111,6 @@ width0pt\relax} \fi \message{cross references,} \newwrite\auxfile - \newif\ifhavexrefs % True if xref values are known. \newif\ifwarnedxrefs % True if we warned once that they aren't known. @@ -5725,15 +7120,24 @@ width0pt\relax} \fi node \samp{\ignorespaces#1{}}} % @node's only job in TeX is to define \lastnode, which is used in -% cross-references. -\parseargdef\node{\checkenv{}\nodexxx #1,\finishnodeparse} -\def\nodexxx#1,#2\finishnodeparse{\gdef\lastnode{#1}} +% cross-references. The @node line might or might not have commas, and +% might or might not have spaces before the first comma, like: +% @node foo , bar , ... +% We don't want such trailing spaces in the node name. +% +\parseargdef\node{\checkenv{}\donode #1 ,\finishnodeparse} +% +% also remove a trailing comma, in case of something like this: +% @node Help-Cross, , , Cross-refs +\def\donode#1 ,#2\finishnodeparse{\dodonode #1,\finishnodeparse} +\def\dodonode#1,#2\finishnodeparse{\gdef\lastnode{#1}} + \let\nwnode=\node \let\lastnode=\empty % Write a cross-reference definition for the current node. #1 is the % type (Ynumbered, Yappendix, Ynothing). -% +% \def\donoderef#1{% \ifx\lastnode\empty\else \setref{\lastnode}{#1}% @@ -5751,31 +7155,29 @@ width0pt\relax} \fi % \setref{NAME}{SNT} defines a cross-reference point NAME (a node or an % anchor), which consists of three parts: -% 1) NAME-title - the current sectioning name taken from \thissection, +% 1) NAME-title - the current sectioning name taken from \lastsection, % or the anchor name. % 2) NAME-snt - section number and type, passed as the SNT arg, or % empty for anchors. % 3) NAME-pg - the page number. -% +% % This is called from \donoderef, \anchor, and \dofloat. In the case of % floats, there is an additional part, which is not written here: % 4) NAME-lof - the text as it should appear in a @listoffloats. -% +% \def\setref#1#2{% \pdfmkdest{#1}% \iflinks {% \atdummies % preserve commands, but don't expand them - \turnoffactive - \otherbackslash \edef\writexrdef##1##2{% \write\auxfile{@xrdef{#1-% #1 of \setref, expanded by the \edef ##1}{##2}}% these are parameters of \writexrdef }% - \toks0 = \expandafter{\thissection}% + \toks0 = \expandafter{\lastsection}% \immediate \writexrdef{title}{\the\toks0 }% \immediate \writexrdef{snt}{\csname #2\endcsname}% \Ynumbered etc. - \writexrdef{pg}{\folio}% will be written later, during \shipout + \safewhatsit{\writexrdef{pg}{\folio}}% will be written later, during \shipout }% \fi } @@ -5819,18 +7221,25 @@ width0pt\relax} \fi % % Make link in pdf output. \ifpdf - \leavevmode - \getfilename{#4}% - {\turnoffactive \otherbackslash + {\indexnofonts + \turnoffactive + % This expands tokens, so do it after making catcode changes, so _ + % etc. don't get their TeX definitions. + \getfilename{#4}% + % + % See comments at \activebackslashdouble. + {\activebackslashdouble \xdef\pdfxrefdest{#1}% + \backslashparens\pdfxrefdest}% + % + \leavevmode + \startlink attr{/Border [0 0 0]}% \ifnum\filenamelength>0 - \startlink attr{/Border [0 0 0]}% - goto file{\the\filename.pdf} name{#1}% + goto file{\the\filename.pdf} name{\pdfxrefdest}% \else - \startlink attr{/Border [0 0 0]}% - goto name{\pdfmkpgn{#1}}% + goto name{\pdfmkpgn{\pdfxrefdest}}% \fi }% - \linkcolor + \setcolor{\linkcolor}% \fi % % Float references are printed completely differently: "Figure 1.2" @@ -5841,7 +7250,6 @@ width0pt\relax} \fi % include an _ in the xref name, etc. \indexnofonts \turnoffactive - \otherbackslash \expandafter\global\expandafter\let\expandafter\Xthisreftitle \csname XR#1-title\endcsname }% @@ -5849,19 +7257,19 @@ width0pt\relax} \fi % If the user specified the print name (third arg) to the ref, % print it instead of our usual "Figure 1.2". \ifdim\wd0 = 0pt - \refx{#1-snt}% + \refx{#1-snt}{}% \else \printedrefname \fi % % if the user also gave the printed manual name (fifth arg), append - % "in MANUALNAME". + % "in MANUALNAME". \ifdim \wd1 > 0pt \space \putwordin{} \cite{\printedmanual}% \fi \else % node/anchor (non-float) references. - % + % % If we use \unhbox0 and \unhbox1 to print the node names, TeX does not % insert empty discretionaries after hyphens, which means that it will % not find a line break at a hyphen in a node names. Since some manuals @@ -5869,14 +7277,14 @@ width0pt\relax} \fi % is a loss. Therefore, we give the text of the node name again, so it % is as if TeX is seeing it for the first time. \ifdim \wd1 > 0pt - \putwordsection{} ``\printedrefname'' \putwordin{} \cite{\printedmanual}% + \putwordSection{} ``\printedrefname'' \putwordin{} \cite{\printedmanual}% \else % _ (for example) has to be the character _ for the purposes of the % control sequence corresponding to the node, but it has to expand % into the usual \leavevmode...\vrule stuff for purposes of % printing. So we \turnoffactive for the \refx-snt, back on for the % printing, back off for the \refx-pg. - {\turnoffactive \otherbackslash + {\turnoffactive % Only output a following space if the -snt ref is nonempty; for % @unnumbered and @anchor, it won't be. \setbox2 = \hbox{\ignorespaces \refx{#1-snt}{}}% @@ -5889,7 +7297,7 @@ width0pt\relax} \fi ,\space % % output the `page 3'. - \turnoffactive \otherbackslash \putwordpage\tie\refx{#1-pg}{}% + \turnoffactive \putwordpage\tie\refx{#1-pg}{}% \fi \fi \endlink @@ -5965,14 +7373,22 @@ width0pt\relax} \fi % collisions). But if this is a float type, we have more work to do. % \def\xrdef#1#2{% - \expandafter\gdef\csname XR#1\endcsname{#2}% remember this xref value. + {% The node name might contain 8-bit characters, which in our current + % implementation are changed to commands like @'e. Don't let these + % mess up the control sequence name. + \indexnofonts + \turnoffactive + \xdef\safexrefname{#1}% + }% + % + \expandafter\gdef\csname XR\safexrefname\endcsname{#2}% remember this xref % % Was that xref control sequence that we just defined for a float? - \expandafter\iffloat\csname XR#1\endcsname + \expandafter\iffloat\csname XR\safexrefname\endcsname % it was a float, and we have the (safe) float type in \iffloattype. \expandafter\let\expandafter\floatlist \csname floatlist\iffloattype\endcsname - % + % % Is this the first time we've seen this float type? \expandafter\ifx\floatlist\relax \toks0 = {\do}% yes, so just \do @@ -5983,22 +7399,23 @@ width0pt\relax} \fi % % Remember this xref in the control sequence \floatlistFLOATTYPE, % for later use in \listoffloats. - \expandafter\xdef\csname floatlist\iffloattype\endcsname{\the\toks0{#1}}% + \expandafter\xdef\csname floatlist\iffloattype\endcsname{\the\toks0 + {\safexrefname}}% \fi } % Read the last existing aux file, if any. No error if none exists. -% +% \def\tryauxfile{% \openin 1 \jobname.aux \ifeof 1 \else - \readauxfile + \readdatafile{aux}% \global\havexrefstrue \fi \closein 1 } -\def\readauxfile{\begingroup +\def\setupdatafile{% \catcode`\^^@=\other \catcode`\^^A=\other \catcode`\^^B=\other @@ -6067,11 +7484,11 @@ width0pt\relax} \fi % % Make the characters 128-255 be printing characters. {% - \count 1=128 + \count1=128 \def\loop{% - \catcode\count 1=\other - \advance\count 1 by 1 - \ifnum \count 1<256 \loop \fi + \catcode\count1=\other + \advance\count1 by 1 + \ifnum \count1<256 \loop \fi }% }% % @@ -6079,8 +7496,12 @@ width0pt\relax} \fi \catcode`\{=1 \catcode`\}=2 \catcode`\@=0 - % - \input \jobname.aux +} + +\def\readdatafile#1{% +\begingroup + \setupdatafile + \input\jobname.#1 \endgroup} @@ -6166,7 +7587,7 @@ width0pt\relax} \fi % In case a @footnote appears in a vbox, save the footnote text and create % the real \insert just after the vbox finished. Otherwise, the insertion % would be lost. -% Similarily, if a @footnote appears inside an alignment, save the footnote +% Similarly, if a @footnote appears inside an alignment, save the footnote % text to a box and make the \insert when a row of the table is finished. % And the same can be done for other insert classes. --kasal, 16nov03. @@ -6270,15 +7691,19 @@ width0pt\relax} \fi % If the image is by itself, center it. \ifvmode \imagevmodetrue - \nobreak\bigskip + \nobreak\medskip % Usually we'll have text after the image which will insert % \parskip glue, so insert it here too to equalize the space % above and below. \nobreak\vskip\parskip \nobreak - \line\bgroup\hss \fi % + % Leave vertical mode so that indentation from an enclosing + % environment such as @quotation is respected. On the other hand, if + % it's at the top level, we don't want the normal paragraph indentation. + \noindent + % % Output the image. \ifpdf \dopdfimage{#1}{#2}{#3}% @@ -6289,26 +7714,29 @@ width0pt\relax} \fi \epsfbox{#1.eps}% \fi % - \ifimagevmode \hss \egroup \bigbreak \fi % space after the image + \ifimagevmode \medskip \fi % space after the standalone image \endgroup} -% @float FLOATTYPE,LOC ... @end float for displayed figures, tables, etc. -% We don't actually implement floating yet, we just plop the float "here". -% But it seemed the best name for the future. -% -\envparseargdef\float{\dofloat #1,,,\finish} +% @float FLOATTYPE,LABEL,LOC ... @end float for displayed figures, tables, +% etc. We don't actually implement floating yet, we always include the +% float "here". But it seemed the best name for the future. +% +\envparseargdef\float{\eatcommaspace\eatcommaspace\dofloat#1, , ,\finish} + +% There may be a space before second and/or third parameter; delete it. +\def\eatcommaspace#1, {#1,} % #1 is the optional FLOATTYPE, the text label for this float, typically % "Figure", "Table", "Example", etc. Can't contain commas. If omitted, % this float will not be numbered and cannot be referred to. -% +% % #2 is the optional xref label. Also must be present for the float to % be referable. -% +% % #3 is the optional positioning argument; for now, it is ignored. It % will somehow specify the positions allowed to float to (here, top, bottom). -% +% % We keep a separate counter for each FLOATTYPE, which we reset at each % chapter-level command. \let\resetallfloatnos=\empty @@ -6318,8 +7746,15 @@ width0pt\relax} \fi \let\thisshortcaption=\empty % % don't lose footnotes inside @float. + % + % BEWARE: when the floats start float, we have to issue warning whenever an + % insert appears inside a float which could possibly float. --kasal, 26may04 + % \startsavinginserts % + % We can't be used inside a paragraph. + \par + % \vtop\bgroup \def\floattype{#1}% \def\floatlabel{#2}% @@ -6341,18 +7776,18 @@ width0pt\relax} \fi \ifx\floatlabel\empty \else % We want each FLOATTYPE to be numbered separately (Figure 1, % Table 1, Figure 2, ...). (And if no label, no number.) - % + % \expandafter\getfloatno\csname\safefloattype floatno\endcsname \global\advance\floatno by 1 % {% - % This magic value for \thissection is output by \setref as the + % This magic value for \lastsection is output by \setref as the % XREFLABEL-title value. \xrefX uses it to distinguish float % labels (which have a completely different output format) from % node and anchor labels. And \xrdef uses it to construct the % lists of floats. - % - \edef\thissection{\floatmagic=\safefloattype}% + % + \edef\lastsection{\floatmagic=\safefloattype}% \setref{\floatlabel}{Yfloat}% }% \fi @@ -6399,7 +7834,7 @@ width0pt\relax} \fi \fi % % caption text. - \appendtomacro\captionline\thiscaption + \appendtomacro\captionline{\scanexp\thiscaption}% \fi % % If we have anything to print, print it, with space before. @@ -6407,6 +7842,9 @@ width0pt\relax} \fi \ifx\captionline\empty \else \vskip.5\parskip \captionline + % + % Space below caption. + \vskip\parskip \fi % % If have an xref label, write the list of floats info. Do this @@ -6416,38 +7854,47 @@ width0pt\relax} \fi % \floatlabel-lof. Besides \floatident, we include the short % caption if specified, else the full caption if specified, else nothing. {% - \atdummies \turnoffactive \otherbackslash - \immediate\write\auxfile{@xrdef{\floatlabel-lof}{% - \floatident - \ifx\thisshortcaption\empty - \ifx\thiscaption\empty \else : \thiscaption \fi - \else - : \thisshortcaption - \fi - }}% + \atdummies + % + % since we read the caption text in the macro world, where ^^M + % is turned into a normal character, we have to scan it back, so + % we don't write the literal three characters "^^M" into the aux file. + \scanexp{% + \xdef\noexpand\gtemp{% + \ifx\thisshortcaption\empty + \thiscaption + \else + \thisshortcaption + \fi + }% + }% + \immediate\write\auxfile{@xrdef{\floatlabel-lof}{\floatident + \ifx\gtemp\empty \else : \gtemp \fi}}% }% \fi - % - % Space below caption, if we printed anything. - \ifx\printedsomething\empty \else \vskip\parskip \fi \egroup % end of \vtop + % + % place the captured inserts + % + % BEWARE: when the floats start floating, we have to issue warning + % whenever an insert appears inside a float which could possibly + % float. --kasal, 26may04 + % \checkinserts } % Append the tokens #2 to the definition of macro #1, not expanding either. -% -\newtoks\appendtomacroAtoks -\newtoks\appendtomacroBtoks +% \def\appendtomacro#1#2{% - \appendtomacroAtoks = \expandafter{#1}% - \appendtomacroBtoks = {#2}% - \edef#1{\the\appendtomacroAtoks \the\appendtomacroBtoks}% + \expandafter\def\expandafter#1\expandafter{#1#2}% } -% @caption, @shortcaption are easy. -% -\long\def\caption#1{\checkenv\float \def\thiscaption{#1}} -\def\shortcaption#1{\checkenv\float \def\thisshortcaption{#1}} +% @caption, @shortcaption +% +\def\caption{\docaption\thiscaption} +\def\shortcaption{\docaption\thisshortcaption} +\def\docaption{\checkenv\float \bgroup\scanargctxt\defcaption} +\def\defcaption#1#2{\egroup \def#1{#2}} % The parameter is the control sequence identifying the counter we are % going to use. Create it if it doesn't exist and assign it to \floatno. @@ -6466,7 +7913,7 @@ width0pt\relax} \fi % \setref calls this to get the XREFLABEL-snt value. We want an @xref % to the FLOATLABEL to expand to "Figure 3.1". We call \setref when we % first read the @float command. -% +% \def\Yfloat{\floattype@tie \chaplevelprefix\the\floatno}% % Magic string used for the XREFLABEL-title value, so \xrefX can @@ -6475,13 +7922,13 @@ width0pt\relax} \fi % #1 is the control sequence we are passed; we expand into a conditional % which is true if #1 represents a float ref. That is, the magic -% \thissection value which we \setref above. -% +% \lastsection value which we \setref above. +% \def\iffloat#1{\expandafter\doiffloat#1==\finish} % % #1 is (maybe) the \floatmagic string. If so, #2 will be the % (safe) float type for this float. We set \iffloattype to #2. -% +% \def\doiffloat#1=#2=#3\finish{% \def\temp{#1}% \def\iffloattype{#2}% @@ -6489,7 +7936,7 @@ width0pt\relax} \fi } % @listoffloats FLOATTYPE - print a list of floats like a table of contents. -% +% \parseargdef\listoffloats{% \def\floattype{#1}% floattype {% @@ -6519,10 +7966,10 @@ width0pt\relax} \fi % xref label, in the form LABEL-title, which is how we save it in the % aux file. We strip off the -title and look up \XRLABEL-lof, which % has the text we're supposed to typeset here. -% +% % Figures without xref labels will not be included in the list (since % they won't appear in the aux file). -% +% \def\listoffloatsdo#1{\listoffloatsdoentry#1\finish} \def\listoffloatsdoentry#1-title\finish{{% % Can't fully expand XR#1-lof because it can contain anything. Just @@ -6536,39 +7983,909 @@ width0pt\relax} \fi \writeentry }} + \message{localization,} -% and i18n. -% @documentlanguage is usually given very early, just after -% @setfilename. If done too late, it may not override everything -% properly. Single argument is the language abbreviation. -% It would be nice if we could set up a hyphenation file here. +% For single-language documents, @documentlanguage is usually given very +% early, just after @documentencoding. Single argument is the language +% (de) or locale (de_DE) abbreviation. % -\parseargdef\documentlanguage{% +{ + \catcode`\_ = \active + \globaldefs=1 +\parseargdef\documentlanguage{\begingroup + \let_=\normalunderscore % normal _ character for filenames \tex % read txi-??.tex file in plain TeX. - % Read the file if it exists. + % Read the file by the name they passed if it exists. \openin 1 txi-#1.tex \ifeof 1 - \errhelp = \nolanghelp - \errmessage{Cannot read language file txi-#1.tex}% + \documentlanguagetrywithoutunderscore{#1_\finish}% \else + \globaldefs = 1 % everything in the txi-LL files needs to persist \input txi-#1.tex \fi \closein 1 - \endgroup + \endgroup % end raw TeX +\endgroup} +% +% If they passed de_DE, and txi-de_DE.tex doesn't exist, +% try txi-de.tex. +% +\gdef\documentlanguagetrywithoutunderscore#1_#2\finish{% + \openin 1 txi-#1.tex + \ifeof 1 + \errhelp = \nolanghelp + \errmessage{Cannot read language file txi-#1.tex}% + \else + \globaldefs = 1 % everything in the txi-LL files needs to persist + \input txi-#1.tex + \fi + \closein 1 } +}% end of special _ catcode +% \newhelp\nolanghelp{The given language definition file cannot be found or -is empty. Maybe you need to install it? In the current directory -should work if nowhere else does.} +is empty. Maybe you need to install it? Putting it in the current +directory should work if nowhere else does.} +% This macro is called from txi-??.tex files; the first argument is the +% \language name to set (without the "\lang@" prefix), the second and +% third args are \{left,right}hyphenmin. +% +% The language names to pass are determined when the format is built. +% See the etex.log file created at that time, e.g., +% /usr/local/texlive/2008/texmf-var/web2c/pdftex/etex.log. +% +% With TeX Live 2008, etex now includes hyphenation patterns for all +% available languages. This means we can support hyphenation in +% Texinfo, at least to some extent. (This still doesn't solve the +% accented characters problem.) +% +\catcode`@=11 +\def\txisetlanguage#1#2#3{% + % do not set the language if the name is undefined in the current TeX. + \expandafter\ifx\csname lang@#1\endcsname \relax + \message{no patterns for #1}% + \else + \global\language = \csname lang@#1\endcsname + \fi + % but there is no harm in adjusting the hyphenmin values regardless. + \global\lefthyphenmin = #2\relax + \global\righthyphenmin = #3\relax +} -% @documentencoding should change something in TeX eventually, most -% likely, but for now just recognize it. -\let\documentencoding = \comment +% Helpers for encodings. +% Set the catcode of characters 128 through 255 to the specified number. +% +\def\setnonasciicharscatcode#1{% + \count255=128 + \loop\ifnum\count255<256 + \global\catcode\count255=#1\relax + \advance\count255 by 1 + \repeat +} +\def\setnonasciicharscatcodenonglobal#1{% + \count255=128 + \loop\ifnum\count255<256 + \catcode\count255=#1\relax + \advance\count255 by 1 + \repeat +} -% Page size parameters. +% @documentencoding sets the definition of non-ASCII characters +% according to the specified encoding. % +\parseargdef\documentencoding{% + % Encoding being declared for the document. + \def\declaredencoding{\csname #1.enc\endcsname}% + % + % Supported encodings: names converted to tokens in order to be able + % to compare them with \ifx. + \def\ascii{\csname US-ASCII.enc\endcsname}% + \def\latnine{\csname ISO-8859-15.enc\endcsname}% + \def\latone{\csname ISO-8859-1.enc\endcsname}% + \def\lattwo{\csname ISO-8859-2.enc\endcsname}% + \def\utfeight{\csname UTF-8.enc\endcsname}% + % + \ifx \declaredencoding \ascii + \asciichardefs + % + \else \ifx \declaredencoding \lattwo + \setnonasciicharscatcode\active + \lattwochardefs + % + \else \ifx \declaredencoding \latone + \setnonasciicharscatcode\active + \latonechardefs + % + \else \ifx \declaredencoding \latnine + \setnonasciicharscatcode\active + \latninechardefs + % + \else \ifx \declaredencoding \utfeight + \setnonasciicharscatcode\active + \utfeightchardefs + % + \else + \message{Unknown document encoding #1, ignoring.}% + % + \fi % utfeight + \fi % latnine + \fi % latone + \fi % lattwo + \fi % ascii +} + +% A message to be logged when using a character that isn't available +% the default font encoding (OT1). +% +\def\missingcharmsg#1{\message{Character missing in OT1 encoding: #1.}} + +% Take account of \c (plain) vs. \, (Texinfo) difference. +\def\cedilla#1{\ifx\c\ptexc\c{#1}\else\,{#1}\fi} + +% First, make active non-ASCII characters in order for them to be +% correctly categorized when TeX reads the replacement text of +% macros containing the character definitions. +\setnonasciicharscatcode\active +% +% Latin1 (ISO-8859-1) character definitions. +\def\latonechardefs{% + \gdef^^a0{~} + \gdef^^a1{\exclamdown} + \gdef^^a2{\missingcharmsg{CENT SIGN}} + \gdef^^a3{{\pounds}} + \gdef^^a4{\missingcharmsg{CURRENCY SIGN}} + \gdef^^a5{\missingcharmsg{YEN SIGN}} + \gdef^^a6{\missingcharmsg{BROKEN BAR}} + \gdef^^a7{\S} + \gdef^^a8{\"{}} + \gdef^^a9{\copyright} + \gdef^^aa{\ordf} + \gdef^^ab{\guillemetleft} + \gdef^^ac{$\lnot$} + \gdef^^ad{\-} + \gdef^^ae{\registeredsymbol} + \gdef^^af{\={}} + % + \gdef^^b0{\textdegree} + \gdef^^b1{$\pm$} + \gdef^^b2{$^2$} + \gdef^^b3{$^3$} + \gdef^^b4{\'{}} + \gdef^^b5{$\mu$} + \gdef^^b6{\P} + % + \gdef^^b7{$^.$} + \gdef^^b8{\cedilla\ } + \gdef^^b9{$^1$} + \gdef^^ba{\ordm} + % + \gdef^^bb{\guilletright} + \gdef^^bc{$1\over4$} + \gdef^^bd{$1\over2$} + \gdef^^be{$3\over4$} + \gdef^^bf{\questiondown} + % + \gdef^^c0{\`A} + \gdef^^c1{\'A} + \gdef^^c2{\^A} + \gdef^^c3{\~A} + \gdef^^c4{\"A} + \gdef^^c5{\ringaccent A} + \gdef^^c6{\AE} + \gdef^^c7{\cedilla C} + \gdef^^c8{\`E} + \gdef^^c9{\'E} + \gdef^^ca{\^E} + \gdef^^cb{\"E} + \gdef^^cc{\`I} + \gdef^^cd{\'I} + \gdef^^ce{\^I} + \gdef^^cf{\"I} + % + \gdef^^d0{\DH} + \gdef^^d1{\~N} + \gdef^^d2{\`O} + \gdef^^d3{\'O} + \gdef^^d4{\^O} + \gdef^^d5{\~O} + \gdef^^d6{\"O} + \gdef^^d7{$\times$} + \gdef^^d8{\O} + \gdef^^d9{\`U} + \gdef^^da{\'U} + \gdef^^db{\^U} + \gdef^^dc{\"U} + \gdef^^dd{\'Y} + \gdef^^de{\TH} + \gdef^^df{\ss} + % + \gdef^^e0{\`a} + \gdef^^e1{\'a} + \gdef^^e2{\^a} + \gdef^^e3{\~a} + \gdef^^e4{\"a} + \gdef^^e5{\ringaccent a} + \gdef^^e6{\ae} + \gdef^^e7{\cedilla c} + \gdef^^e8{\`e} + \gdef^^e9{\'e} + \gdef^^ea{\^e} + \gdef^^eb{\"e} + \gdef^^ec{\`{\dotless i}} + \gdef^^ed{\'{\dotless i}} + \gdef^^ee{\^{\dotless i}} + \gdef^^ef{\"{\dotless i}} + % + \gdef^^f0{\dh} + \gdef^^f1{\~n} + \gdef^^f2{\`o} + \gdef^^f3{\'o} + \gdef^^f4{\^o} + \gdef^^f5{\~o} + \gdef^^f6{\"o} + \gdef^^f7{$\div$} + \gdef^^f8{\o} + \gdef^^f9{\`u} + \gdef^^fa{\'u} + \gdef^^fb{\^u} + \gdef^^fc{\"u} + \gdef^^fd{\'y} + \gdef^^fe{\th} + \gdef^^ff{\"y} +} + +% Latin9 (ISO-8859-15) encoding character definitions. +\def\latninechardefs{% + % Encoding is almost identical to Latin1. + \latonechardefs + % + \gdef^^a4{\euro} + \gdef^^a6{\v S} + \gdef^^a8{\v s} + \gdef^^b4{\v Z} + \gdef^^b8{\v z} + \gdef^^bc{\OE} + \gdef^^bd{\oe} + \gdef^^be{\"Y} +} + +% Latin2 (ISO-8859-2) character definitions. +\def\lattwochardefs{% + \gdef^^a0{~} + \gdef^^a1{\ogonek{A}} + \gdef^^a2{\u{}} + \gdef^^a3{\L} + \gdef^^a4{\missingcharmsg{CURRENCY SIGN}} + \gdef^^a5{\v L} + \gdef^^a6{\'S} + \gdef^^a7{\S} + \gdef^^a8{\"{}} + \gdef^^a9{\v S} + \gdef^^aa{\cedilla S} + \gdef^^ab{\v T} + \gdef^^ac{\'Z} + \gdef^^ad{\-} + \gdef^^ae{\v Z} + \gdef^^af{\dotaccent Z} + % + \gdef^^b0{\textdegree} + \gdef^^b1{\ogonek{a}} + \gdef^^b2{\ogonek{ }} + \gdef^^b3{\l} + \gdef^^b4{\'{}} + \gdef^^b5{\v l} + \gdef^^b6{\'s} + \gdef^^b7{\v{}} + \gdef^^b8{\cedilla\ } + \gdef^^b9{\v s} + \gdef^^ba{\cedilla s} + \gdef^^bb{\v t} + \gdef^^bc{\'z} + \gdef^^bd{\H{}} + \gdef^^be{\v z} + \gdef^^bf{\dotaccent z} + % + \gdef^^c0{\'R} + \gdef^^c1{\'A} + \gdef^^c2{\^A} + \gdef^^c3{\u A} + \gdef^^c4{\"A} + \gdef^^c5{\'L} + \gdef^^c6{\'C} + \gdef^^c7{\cedilla C} + \gdef^^c8{\v C} + \gdef^^c9{\'E} + \gdef^^ca{\ogonek{E}} + \gdef^^cb{\"E} + \gdef^^cc{\v E} + \gdef^^cd{\'I} + \gdef^^ce{\^I} + \gdef^^cf{\v D} + % + \gdef^^d0{\DH} + \gdef^^d1{\'N} + \gdef^^d2{\v N} + \gdef^^d3{\'O} + \gdef^^d4{\^O} + \gdef^^d5{\H O} + \gdef^^d6{\"O} + \gdef^^d7{$\times$} + \gdef^^d8{\v R} + \gdef^^d9{\ringaccent U} + \gdef^^da{\'U} + \gdef^^db{\H U} + \gdef^^dc{\"U} + \gdef^^dd{\'Y} + \gdef^^de{\cedilla T} + \gdef^^df{\ss} + % + \gdef^^e0{\'r} + \gdef^^e1{\'a} + \gdef^^e2{\^a} + \gdef^^e3{\u a} + \gdef^^e4{\"a} + \gdef^^e5{\'l} + \gdef^^e6{\'c} + \gdef^^e7{\cedilla c} + \gdef^^e8{\v c} + \gdef^^e9{\'e} + \gdef^^ea{\ogonek{e}} + \gdef^^eb{\"e} + \gdef^^ec{\v e} + \gdef^^ed{\'\i} + \gdef^^ee{\^\i} + \gdef^^ef{\v d} + % + \gdef^^f0{\dh} + \gdef^^f1{\'n} + \gdef^^f2{\v n} + \gdef^^f3{\'o} + \gdef^^f4{\^o} + \gdef^^f5{\H o} + \gdef^^f6{\"o} + \gdef^^f7{$\div$} + \gdef^^f8{\v r} + \gdef^^f9{\ringaccent u} + \gdef^^fa{\'u} + \gdef^^fb{\H u} + \gdef^^fc{\"u} + \gdef^^fd{\'y} + \gdef^^fe{\cedilla t} + \gdef^^ff{\dotaccent{}} +} + +% UTF-8 character definitions. +% +% This code to support UTF-8 is based on LaTeX's utf8.def, with some +% changes for Texinfo conventions. It is included here under the GPL by +% permission from Frank Mittelbach and the LaTeX team. +% +\newcount\countUTFx +\newcount\countUTFy +\newcount\countUTFz + +\gdef\UTFviiiTwoOctets#1#2{\expandafter + \UTFviiiDefined\csname u8:#1\string #2\endcsname} +% +\gdef\UTFviiiThreeOctets#1#2#3{\expandafter + \UTFviiiDefined\csname u8:#1\string #2\string #3\endcsname} +% +\gdef\UTFviiiFourOctets#1#2#3#4{\expandafter + \UTFviiiDefined\csname u8:#1\string #2\string #3\string #4\endcsname} + +\gdef\UTFviiiDefined#1{% + \ifx #1\relax + \message{\linenumber Unicode char \string #1 not defined for Texinfo}% + \else + \expandafter #1% + \fi +} + +\begingroup + \catcode`\~13 + \catcode`\"12 + + \def\UTFviiiLoop{% + \global\catcode\countUTFx\active + \uccode`\~\countUTFx + \uppercase\expandafter{\UTFviiiTmp}% + \advance\countUTFx by 1 + \ifnum\countUTFx < \countUTFy + \expandafter\UTFviiiLoop + \fi} + + \countUTFx = "C2 + \countUTFy = "E0 + \def\UTFviiiTmp{% + \xdef~{\noexpand\UTFviiiTwoOctets\string~}} + \UTFviiiLoop + + \countUTFx = "E0 + \countUTFy = "F0 + \def\UTFviiiTmp{% + \xdef~{\noexpand\UTFviiiThreeOctets\string~}} + \UTFviiiLoop + + \countUTFx = "F0 + \countUTFy = "F4 + \def\UTFviiiTmp{% + \xdef~{\noexpand\UTFviiiFourOctets\string~}} + \UTFviiiLoop +\endgroup + +\begingroup + \catcode`\"=12 + \catcode`\<=12 + \catcode`\.=12 + \catcode`\,=12 + \catcode`\;=12 + \catcode`\!=12 + \catcode`\~=13 + + \gdef\DeclareUnicodeCharacter#1#2{% + \countUTFz = "#1\relax + \wlog{\space\space defining Unicode char U+#1 (decimal \the\countUTFz)}% + \begingroup + \parseXMLCharref + \def\UTFviiiTwoOctets##1##2{% + \csname u8:##1\string ##2\endcsname}% + \def\UTFviiiThreeOctets##1##2##3{% + \csname u8:##1\string ##2\string ##3\endcsname}% + \def\UTFviiiFourOctets##1##2##3##4{% + \csname u8:##1\string ##2\string ##3\string ##4\endcsname}% + \expandafter\expandafter\expandafter\expandafter + \expandafter\expandafter\expandafter + \gdef\UTFviiiTmp{#2}% + \endgroup} + + \gdef\parseXMLCharref{% + \ifnum\countUTFz < "A0\relax + \errhelp = \EMsimple + \errmessage{Cannot define Unicode char value < 00A0}% + \else\ifnum\countUTFz < "800\relax + \parseUTFviiiA,% + \parseUTFviiiB C\UTFviiiTwoOctets.,% + \else\ifnum\countUTFz < "10000\relax + \parseUTFviiiA;% + \parseUTFviiiA,% + \parseUTFviiiB E\UTFviiiThreeOctets.{,;}% + \else + \parseUTFviiiA;% + \parseUTFviiiA,% + \parseUTFviiiA!% + \parseUTFviiiB F\UTFviiiFourOctets.{!,;}% + \fi\fi\fi + } + + \gdef\parseUTFviiiA#1{% + \countUTFx = \countUTFz + \divide\countUTFz by 64 + \countUTFy = \countUTFz + \multiply\countUTFz by 64 + \advance\countUTFx by -\countUTFz + \advance\countUTFx by 128 + \uccode `#1\countUTFx + \countUTFz = \countUTFy} + + \gdef\parseUTFviiiB#1#2#3#4{% + \advance\countUTFz by "#10\relax + \uccode `#3\countUTFz + \uppercase{\gdef\UTFviiiTmp{#2#3#4}}} +\endgroup + +\def\utfeightchardefs{% + \DeclareUnicodeCharacter{00A0}{\tie} + \DeclareUnicodeCharacter{00A1}{\exclamdown} + \DeclareUnicodeCharacter{00A3}{\pounds} + \DeclareUnicodeCharacter{00A8}{\"{ }} + \DeclareUnicodeCharacter{00A9}{\copyright} + \DeclareUnicodeCharacter{00AA}{\ordf} + \DeclareUnicodeCharacter{00AB}{\guillemetleft} + \DeclareUnicodeCharacter{00AD}{\-} + \DeclareUnicodeCharacter{00AE}{\registeredsymbol} + \DeclareUnicodeCharacter{00AF}{\={ }} + + \DeclareUnicodeCharacter{00B0}{\ringaccent{ }} + \DeclareUnicodeCharacter{00B4}{\'{ }} + \DeclareUnicodeCharacter{00B8}{\cedilla{ }} + \DeclareUnicodeCharacter{00BA}{\ordm} + \DeclareUnicodeCharacter{00BB}{\guillemetright} + \DeclareUnicodeCharacter{00BF}{\questiondown} + + \DeclareUnicodeCharacter{00C0}{\`A} + \DeclareUnicodeCharacter{00C1}{\'A} + \DeclareUnicodeCharacter{00C2}{\^A} + \DeclareUnicodeCharacter{00C3}{\~A} + \DeclareUnicodeCharacter{00C4}{\"A} + \DeclareUnicodeCharacter{00C5}{\AA} + \DeclareUnicodeCharacter{00C6}{\AE} + \DeclareUnicodeCharacter{00C7}{\cedilla{C}} + \DeclareUnicodeCharacter{00C8}{\`E} + \DeclareUnicodeCharacter{00C9}{\'E} + \DeclareUnicodeCharacter{00CA}{\^E} + \DeclareUnicodeCharacter{00CB}{\"E} + \DeclareUnicodeCharacter{00CC}{\`I} + \DeclareUnicodeCharacter{00CD}{\'I} + \DeclareUnicodeCharacter{00CE}{\^I} + \DeclareUnicodeCharacter{00CF}{\"I} + + \DeclareUnicodeCharacter{00D0}{\DH} + \DeclareUnicodeCharacter{00D1}{\~N} + \DeclareUnicodeCharacter{00D2}{\`O} + \DeclareUnicodeCharacter{00D3}{\'O} + \DeclareUnicodeCharacter{00D4}{\^O} + \DeclareUnicodeCharacter{00D5}{\~O} + \DeclareUnicodeCharacter{00D6}{\"O} + \DeclareUnicodeCharacter{00D8}{\O} + \DeclareUnicodeCharacter{00D9}{\`U} + \DeclareUnicodeCharacter{00DA}{\'U} + \DeclareUnicodeCharacter{00DB}{\^U} + \DeclareUnicodeCharacter{00DC}{\"U} + \DeclareUnicodeCharacter{00DD}{\'Y} + \DeclareUnicodeCharacter{00DE}{\TH} + \DeclareUnicodeCharacter{00DF}{\ss} + + \DeclareUnicodeCharacter{00E0}{\`a} + \DeclareUnicodeCharacter{00E1}{\'a} + \DeclareUnicodeCharacter{00E2}{\^a} + \DeclareUnicodeCharacter{00E3}{\~a} + \DeclareUnicodeCharacter{00E4}{\"a} + \DeclareUnicodeCharacter{00E5}{\aa} + \DeclareUnicodeCharacter{00E6}{\ae} + \DeclareUnicodeCharacter{00E7}{\cedilla{c}} + \DeclareUnicodeCharacter{00E8}{\`e} + \DeclareUnicodeCharacter{00E9}{\'e} + \DeclareUnicodeCharacter{00EA}{\^e} + \DeclareUnicodeCharacter{00EB}{\"e} + \DeclareUnicodeCharacter{00EC}{\`{\dotless{i}}} + \DeclareUnicodeCharacter{00ED}{\'{\dotless{i}}} + \DeclareUnicodeCharacter{00EE}{\^{\dotless{i}}} + \DeclareUnicodeCharacter{00EF}{\"{\dotless{i}}} + + \DeclareUnicodeCharacter{00F0}{\dh} + \DeclareUnicodeCharacter{00F1}{\~n} + \DeclareUnicodeCharacter{00F2}{\`o} + \DeclareUnicodeCharacter{00F3}{\'o} + \DeclareUnicodeCharacter{00F4}{\^o} + \DeclareUnicodeCharacter{00F5}{\~o} + \DeclareUnicodeCharacter{00F6}{\"o} + \DeclareUnicodeCharacter{00F8}{\o} + \DeclareUnicodeCharacter{00F9}{\`u} + \DeclareUnicodeCharacter{00FA}{\'u} + \DeclareUnicodeCharacter{00FB}{\^u} + \DeclareUnicodeCharacter{00FC}{\"u} + \DeclareUnicodeCharacter{00FD}{\'y} + \DeclareUnicodeCharacter{00FE}{\th} + \DeclareUnicodeCharacter{00FF}{\"y} + + \DeclareUnicodeCharacter{0100}{\=A} + \DeclareUnicodeCharacter{0101}{\=a} + \DeclareUnicodeCharacter{0102}{\u{A}} + \DeclareUnicodeCharacter{0103}{\u{a}} + \DeclareUnicodeCharacter{0104}{\ogonek{A}} + \DeclareUnicodeCharacter{0105}{\ogonek{a}} + \DeclareUnicodeCharacter{0106}{\'C} + \DeclareUnicodeCharacter{0107}{\'c} + \DeclareUnicodeCharacter{0108}{\^C} + \DeclareUnicodeCharacter{0109}{\^c} + \DeclareUnicodeCharacter{0118}{\ogonek{E}} + \DeclareUnicodeCharacter{0119}{\ogonek{e}} + \DeclareUnicodeCharacter{010A}{\dotaccent{C}} + \DeclareUnicodeCharacter{010B}{\dotaccent{c}} + \DeclareUnicodeCharacter{010C}{\v{C}} + \DeclareUnicodeCharacter{010D}{\v{c}} + \DeclareUnicodeCharacter{010E}{\v{D}} + + \DeclareUnicodeCharacter{0112}{\=E} + \DeclareUnicodeCharacter{0113}{\=e} + \DeclareUnicodeCharacter{0114}{\u{E}} + \DeclareUnicodeCharacter{0115}{\u{e}} + \DeclareUnicodeCharacter{0116}{\dotaccent{E}} + \DeclareUnicodeCharacter{0117}{\dotaccent{e}} + \DeclareUnicodeCharacter{011A}{\v{E}} + \DeclareUnicodeCharacter{011B}{\v{e}} + \DeclareUnicodeCharacter{011C}{\^G} + \DeclareUnicodeCharacter{011D}{\^g} + \DeclareUnicodeCharacter{011E}{\u{G}} + \DeclareUnicodeCharacter{011F}{\u{g}} + + \DeclareUnicodeCharacter{0120}{\dotaccent{G}} + \DeclareUnicodeCharacter{0121}{\dotaccent{g}} + \DeclareUnicodeCharacter{0124}{\^H} + \DeclareUnicodeCharacter{0125}{\^h} + \DeclareUnicodeCharacter{0128}{\~I} + \DeclareUnicodeCharacter{0129}{\~{\dotless{i}}} + \DeclareUnicodeCharacter{012A}{\=I} + \DeclareUnicodeCharacter{012B}{\={\dotless{i}}} + \DeclareUnicodeCharacter{012C}{\u{I}} + \DeclareUnicodeCharacter{012D}{\u{\dotless{i}}} + + \DeclareUnicodeCharacter{0130}{\dotaccent{I}} + \DeclareUnicodeCharacter{0131}{\dotless{i}} + \DeclareUnicodeCharacter{0132}{IJ} + \DeclareUnicodeCharacter{0133}{ij} + \DeclareUnicodeCharacter{0134}{\^J} + \DeclareUnicodeCharacter{0135}{\^{\dotless{j}}} + \DeclareUnicodeCharacter{0139}{\'L} + \DeclareUnicodeCharacter{013A}{\'l} + + \DeclareUnicodeCharacter{0141}{\L} + \DeclareUnicodeCharacter{0142}{\l} + \DeclareUnicodeCharacter{0143}{\'N} + \DeclareUnicodeCharacter{0144}{\'n} + \DeclareUnicodeCharacter{0147}{\v{N}} + \DeclareUnicodeCharacter{0148}{\v{n}} + \DeclareUnicodeCharacter{014C}{\=O} + \DeclareUnicodeCharacter{014D}{\=o} + \DeclareUnicodeCharacter{014E}{\u{O}} + \DeclareUnicodeCharacter{014F}{\u{o}} + + \DeclareUnicodeCharacter{0150}{\H{O}} + \DeclareUnicodeCharacter{0151}{\H{o}} + \DeclareUnicodeCharacter{0152}{\OE} + \DeclareUnicodeCharacter{0153}{\oe} + \DeclareUnicodeCharacter{0154}{\'R} + \DeclareUnicodeCharacter{0155}{\'r} + \DeclareUnicodeCharacter{0158}{\v{R}} + \DeclareUnicodeCharacter{0159}{\v{r}} + \DeclareUnicodeCharacter{015A}{\'S} + \DeclareUnicodeCharacter{015B}{\'s} + \DeclareUnicodeCharacter{015C}{\^S} + \DeclareUnicodeCharacter{015D}{\^s} + \DeclareUnicodeCharacter{015E}{\cedilla{S}} + \DeclareUnicodeCharacter{015F}{\cedilla{s}} + + \DeclareUnicodeCharacter{0160}{\v{S}} + \DeclareUnicodeCharacter{0161}{\v{s}} + \DeclareUnicodeCharacter{0162}{\cedilla{t}} + \DeclareUnicodeCharacter{0163}{\cedilla{T}} + \DeclareUnicodeCharacter{0164}{\v{T}} + + \DeclareUnicodeCharacter{0168}{\~U} + \DeclareUnicodeCharacter{0169}{\~u} + \DeclareUnicodeCharacter{016A}{\=U} + \DeclareUnicodeCharacter{016B}{\=u} + \DeclareUnicodeCharacter{016C}{\u{U}} + \DeclareUnicodeCharacter{016D}{\u{u}} + \DeclareUnicodeCharacter{016E}{\ringaccent{U}} + \DeclareUnicodeCharacter{016F}{\ringaccent{u}} + + \DeclareUnicodeCharacter{0170}{\H{U}} + \DeclareUnicodeCharacter{0171}{\H{u}} + \DeclareUnicodeCharacter{0174}{\^W} + \DeclareUnicodeCharacter{0175}{\^w} + \DeclareUnicodeCharacter{0176}{\^Y} + \DeclareUnicodeCharacter{0177}{\^y} + \DeclareUnicodeCharacter{0178}{\"Y} + \DeclareUnicodeCharacter{0179}{\'Z} + \DeclareUnicodeCharacter{017A}{\'z} + \DeclareUnicodeCharacter{017B}{\dotaccent{Z}} + \DeclareUnicodeCharacter{017C}{\dotaccent{z}} + \DeclareUnicodeCharacter{017D}{\v{Z}} + \DeclareUnicodeCharacter{017E}{\v{z}} + + \DeclareUnicodeCharacter{01C4}{D\v{Z}} + \DeclareUnicodeCharacter{01C5}{D\v{z}} + \DeclareUnicodeCharacter{01C6}{d\v{z}} + \DeclareUnicodeCharacter{01C7}{LJ} + \DeclareUnicodeCharacter{01C8}{Lj} + \DeclareUnicodeCharacter{01C9}{lj} + \DeclareUnicodeCharacter{01CA}{NJ} + \DeclareUnicodeCharacter{01CB}{Nj} + \DeclareUnicodeCharacter{01CC}{nj} + \DeclareUnicodeCharacter{01CD}{\v{A}} + \DeclareUnicodeCharacter{01CE}{\v{a}} + \DeclareUnicodeCharacter{01CF}{\v{I}} + + \DeclareUnicodeCharacter{01D0}{\v{\dotless{i}}} + \DeclareUnicodeCharacter{01D1}{\v{O}} + \DeclareUnicodeCharacter{01D2}{\v{o}} + \DeclareUnicodeCharacter{01D3}{\v{U}} + \DeclareUnicodeCharacter{01D4}{\v{u}} + + \DeclareUnicodeCharacter{01E2}{\={\AE}} + \DeclareUnicodeCharacter{01E3}{\={\ae}} + \DeclareUnicodeCharacter{01E6}{\v{G}} + \DeclareUnicodeCharacter{01E7}{\v{g}} + \DeclareUnicodeCharacter{01E8}{\v{K}} + \DeclareUnicodeCharacter{01E9}{\v{k}} + + \DeclareUnicodeCharacter{01F0}{\v{\dotless{j}}} + \DeclareUnicodeCharacter{01F1}{DZ} + \DeclareUnicodeCharacter{01F2}{Dz} + \DeclareUnicodeCharacter{01F3}{dz} + \DeclareUnicodeCharacter{01F4}{\'G} + \DeclareUnicodeCharacter{01F5}{\'g} + \DeclareUnicodeCharacter{01F8}{\`N} + \DeclareUnicodeCharacter{01F9}{\`n} + \DeclareUnicodeCharacter{01FC}{\'{\AE}} + \DeclareUnicodeCharacter{01FD}{\'{\ae}} + \DeclareUnicodeCharacter{01FE}{\'{\O}} + \DeclareUnicodeCharacter{01FF}{\'{\o}} + + \DeclareUnicodeCharacter{021E}{\v{H}} + \DeclareUnicodeCharacter{021F}{\v{h}} + + \DeclareUnicodeCharacter{0226}{\dotaccent{A}} + \DeclareUnicodeCharacter{0227}{\dotaccent{a}} + \DeclareUnicodeCharacter{0228}{\cedilla{E}} + \DeclareUnicodeCharacter{0229}{\cedilla{e}} + \DeclareUnicodeCharacter{022E}{\dotaccent{O}} + \DeclareUnicodeCharacter{022F}{\dotaccent{o}} + + \DeclareUnicodeCharacter{0232}{\=Y} + \DeclareUnicodeCharacter{0233}{\=y} + \DeclareUnicodeCharacter{0237}{\dotless{j}} + + \DeclareUnicodeCharacter{02DB}{\ogonek{ }} + + \DeclareUnicodeCharacter{1E02}{\dotaccent{B}} + \DeclareUnicodeCharacter{1E03}{\dotaccent{b}} + \DeclareUnicodeCharacter{1E04}{\udotaccent{B}} + \DeclareUnicodeCharacter{1E05}{\udotaccent{b}} + \DeclareUnicodeCharacter{1E06}{\ubaraccent{B}} + \DeclareUnicodeCharacter{1E07}{\ubaraccent{b}} + \DeclareUnicodeCharacter{1E0A}{\dotaccent{D}} + \DeclareUnicodeCharacter{1E0B}{\dotaccent{d}} + \DeclareUnicodeCharacter{1E0C}{\udotaccent{D}} + \DeclareUnicodeCharacter{1E0D}{\udotaccent{d}} + \DeclareUnicodeCharacter{1E0E}{\ubaraccent{D}} + \DeclareUnicodeCharacter{1E0F}{\ubaraccent{d}} + + \DeclareUnicodeCharacter{1E1E}{\dotaccent{F}} + \DeclareUnicodeCharacter{1E1F}{\dotaccent{f}} + + \DeclareUnicodeCharacter{1E20}{\=G} + \DeclareUnicodeCharacter{1E21}{\=g} + \DeclareUnicodeCharacter{1E22}{\dotaccent{H}} + \DeclareUnicodeCharacter{1E23}{\dotaccent{h}} + \DeclareUnicodeCharacter{1E24}{\udotaccent{H}} + \DeclareUnicodeCharacter{1E25}{\udotaccent{h}} + \DeclareUnicodeCharacter{1E26}{\"H} + \DeclareUnicodeCharacter{1E27}{\"h} + + \DeclareUnicodeCharacter{1E30}{\'K} + \DeclareUnicodeCharacter{1E31}{\'k} + \DeclareUnicodeCharacter{1E32}{\udotaccent{K}} + \DeclareUnicodeCharacter{1E33}{\udotaccent{k}} + \DeclareUnicodeCharacter{1E34}{\ubaraccent{K}} + \DeclareUnicodeCharacter{1E35}{\ubaraccent{k}} + \DeclareUnicodeCharacter{1E36}{\udotaccent{L}} + \DeclareUnicodeCharacter{1E37}{\udotaccent{l}} + \DeclareUnicodeCharacter{1E3A}{\ubaraccent{L}} + \DeclareUnicodeCharacter{1E3B}{\ubaraccent{l}} + \DeclareUnicodeCharacter{1E3E}{\'M} + \DeclareUnicodeCharacter{1E3F}{\'m} + + \DeclareUnicodeCharacter{1E40}{\dotaccent{M}} + \DeclareUnicodeCharacter{1E41}{\dotaccent{m}} + \DeclareUnicodeCharacter{1E42}{\udotaccent{M}} + \DeclareUnicodeCharacter{1E43}{\udotaccent{m}} + \DeclareUnicodeCharacter{1E44}{\dotaccent{N}} + \DeclareUnicodeCharacter{1E45}{\dotaccent{n}} + \DeclareUnicodeCharacter{1E46}{\udotaccent{N}} + \DeclareUnicodeCharacter{1E47}{\udotaccent{n}} + \DeclareUnicodeCharacter{1E48}{\ubaraccent{N}} + \DeclareUnicodeCharacter{1E49}{\ubaraccent{n}} + + \DeclareUnicodeCharacter{1E54}{\'P} + \DeclareUnicodeCharacter{1E55}{\'p} + \DeclareUnicodeCharacter{1E56}{\dotaccent{P}} + \DeclareUnicodeCharacter{1E57}{\dotaccent{p}} + \DeclareUnicodeCharacter{1E58}{\dotaccent{R}} + \DeclareUnicodeCharacter{1E59}{\dotaccent{r}} + \DeclareUnicodeCharacter{1E5A}{\udotaccent{R}} + \DeclareUnicodeCharacter{1E5B}{\udotaccent{r}} + \DeclareUnicodeCharacter{1E5E}{\ubaraccent{R}} + \DeclareUnicodeCharacter{1E5F}{\ubaraccent{r}} + + \DeclareUnicodeCharacter{1E60}{\dotaccent{S}} + \DeclareUnicodeCharacter{1E61}{\dotaccent{s}} + \DeclareUnicodeCharacter{1E62}{\udotaccent{S}} + \DeclareUnicodeCharacter{1E63}{\udotaccent{s}} + \DeclareUnicodeCharacter{1E6A}{\dotaccent{T}} + \DeclareUnicodeCharacter{1E6B}{\dotaccent{t}} + \DeclareUnicodeCharacter{1E6C}{\udotaccent{T}} + \DeclareUnicodeCharacter{1E6D}{\udotaccent{t}} + \DeclareUnicodeCharacter{1E6E}{\ubaraccent{T}} + \DeclareUnicodeCharacter{1E6F}{\ubaraccent{t}} + + \DeclareUnicodeCharacter{1E7C}{\~V} + \DeclareUnicodeCharacter{1E7D}{\~v} + \DeclareUnicodeCharacter{1E7E}{\udotaccent{V}} + \DeclareUnicodeCharacter{1E7F}{\udotaccent{v}} + + \DeclareUnicodeCharacter{1E80}{\`W} + \DeclareUnicodeCharacter{1E81}{\`w} + \DeclareUnicodeCharacter{1E82}{\'W} + \DeclareUnicodeCharacter{1E83}{\'w} + \DeclareUnicodeCharacter{1E84}{\"W} + \DeclareUnicodeCharacter{1E85}{\"w} + \DeclareUnicodeCharacter{1E86}{\dotaccent{W}} + \DeclareUnicodeCharacter{1E87}{\dotaccent{w}} + \DeclareUnicodeCharacter{1E88}{\udotaccent{W}} + \DeclareUnicodeCharacter{1E89}{\udotaccent{w}} + \DeclareUnicodeCharacter{1E8A}{\dotaccent{X}} + \DeclareUnicodeCharacter{1E8B}{\dotaccent{x}} + \DeclareUnicodeCharacter{1E8C}{\"X} + \DeclareUnicodeCharacter{1E8D}{\"x} + \DeclareUnicodeCharacter{1E8E}{\dotaccent{Y}} + \DeclareUnicodeCharacter{1E8F}{\dotaccent{y}} + + \DeclareUnicodeCharacter{1E90}{\^Z} + \DeclareUnicodeCharacter{1E91}{\^z} + \DeclareUnicodeCharacter{1E92}{\udotaccent{Z}} + \DeclareUnicodeCharacter{1E93}{\udotaccent{z}} + \DeclareUnicodeCharacter{1E94}{\ubaraccent{Z}} + \DeclareUnicodeCharacter{1E95}{\ubaraccent{z}} + \DeclareUnicodeCharacter{1E96}{\ubaraccent{h}} + \DeclareUnicodeCharacter{1E97}{\"t} + \DeclareUnicodeCharacter{1E98}{\ringaccent{w}} + \DeclareUnicodeCharacter{1E99}{\ringaccent{y}} + + \DeclareUnicodeCharacter{1EA0}{\udotaccent{A}} + \DeclareUnicodeCharacter{1EA1}{\udotaccent{a}} + + \DeclareUnicodeCharacter{1EB8}{\udotaccent{E}} + \DeclareUnicodeCharacter{1EB9}{\udotaccent{e}} + \DeclareUnicodeCharacter{1EBC}{\~E} + \DeclareUnicodeCharacter{1EBD}{\~e} + + \DeclareUnicodeCharacter{1ECA}{\udotaccent{I}} + \DeclareUnicodeCharacter{1ECB}{\udotaccent{i}} + \DeclareUnicodeCharacter{1ECC}{\udotaccent{O}} + \DeclareUnicodeCharacter{1ECD}{\udotaccent{o}} + + \DeclareUnicodeCharacter{1EE4}{\udotaccent{U}} + \DeclareUnicodeCharacter{1EE5}{\udotaccent{u}} + + \DeclareUnicodeCharacter{1EF2}{\`Y} + \DeclareUnicodeCharacter{1EF3}{\`y} + \DeclareUnicodeCharacter{1EF4}{\udotaccent{Y}} + + \DeclareUnicodeCharacter{1EF8}{\~Y} + \DeclareUnicodeCharacter{1EF9}{\~y} + + \DeclareUnicodeCharacter{2013}{--} + \DeclareUnicodeCharacter{2014}{---} + \DeclareUnicodeCharacter{2018}{\quoteleft} + \DeclareUnicodeCharacter{2019}{\quoteright} + \DeclareUnicodeCharacter{201A}{\quotesinglbase} + \DeclareUnicodeCharacter{201C}{\quotedblleft} + \DeclareUnicodeCharacter{201D}{\quotedblright} + \DeclareUnicodeCharacter{201E}{\quotedblbase} + \DeclareUnicodeCharacter{2022}{\bullet} + \DeclareUnicodeCharacter{2026}{\dots} + \DeclareUnicodeCharacter{2039}{\guilsinglleft} + \DeclareUnicodeCharacter{203A}{\guilsinglright} + \DeclareUnicodeCharacter{20AC}{\euro} + + \DeclareUnicodeCharacter{2192}{\expansion} + \DeclareUnicodeCharacter{21D2}{\result} + + \DeclareUnicodeCharacter{2212}{\minus} + \DeclareUnicodeCharacter{2217}{\point} + \DeclareUnicodeCharacter{2261}{\equiv} +}% end of \utfeightchardefs + + +% US-ASCII character definitions. +\def\asciichardefs{% nothing need be done + \relax +} + +% Make non-ASCII characters printable again for compatibility with +% existing Texinfo documents that may use them, even without declaring a +% document encoding. +% +\setnonasciicharscatcode \other + + +\message{formatting,} + \newdimen\defaultparindent \defaultparindent = 15pt \chapheadingskip = 15pt plus 4pt minus 2pt @@ -6581,7 +8898,7 @@ should work if nowhere else does.} % Don't be so finicky about underfull hboxes, either. \hbadness = 2000 -% Following George Bush, just get rid of widows and orphans. +% Following George Bush, get rid of widows and orphans. \widowpenalty=10000 \clubpenalty=10000 @@ -6599,9 +8916,9 @@ should work if nowhere else does.} \fi } -% Parameters in order: 1) textheight; 2) textwidth; 3) voffset; -% 4) hoffset; 5) binding offset; 6) topskip; 7) physical page height; 8) -% physical page width. +% Parameters in order: 1) textheight; 2) textwidth; +% 3) voffset; 4) hoffset; 5) binding offset; 6) topskip; +% 7) physical page height; 8) physical page width. % % We also call \setleading{\textleading}, so the caller should define % \textleading. The caller should also set \parskip. @@ -6628,6 +8945,10 @@ should work if nowhere else does.} \ifpdf \pdfpageheight #7\relax \pdfpagewidth #8\relax + % if we don't reset these, they will remain at "1 true in" of + % whatever layout pdftex was dumped with. + \pdfhorigin = 1 true in + \pdfvorigin = 1 true in \fi % \setleading{\textleading} @@ -6642,19 +8963,19 @@ should work if nowhere else does.} \textleading = 13.2pt % % If page is nothing but text, make it come out even. - \internalpagesizes{46\baselineskip}{6in}% + \internalpagesizes{607.2pt}{6in}% that's 46 lines {\voffset}{.25in}% {\bindingoffset}{36pt}% {11in}{8.5in}% }} -% Use @smallbook to reset parameters for 7x9.5 (or so) format. +% Use @smallbook to reset parameters for 7x9.25 trim size. \def\smallbook{{\globaldefs = 1 \parskip = 2pt plus 1pt \textleading = 12pt % \internalpagesizes{7.5in}{5in}% - {\voffset}{.25in}% + {-.2in}{0in}% {\bindingoffset}{16pt}% {9.25in}{7in}% % @@ -6665,6 +8986,24 @@ should work if nowhere else does.} \defbodyindent = .5cm }} +% Use @smallerbook to reset parameters for 6x9 trim size. +% (Just testing, parameters still in flux.) +\def\smallerbook{{\globaldefs = 1 + \parskip = 1.5pt plus 1pt + \textleading = 12pt + % + \internalpagesizes{7.4in}{4.8in}% + {-.2in}{-.4in}% + {0pt}{14pt}% + {9in}{6in}% + % + \lispnarrowing = 0.25in + \tolerance = 700 + \hfuzz = 1pt + \contentsrightmargin = 0pt + \defbodyindent = .4cm +}} + % Use @afourpaper to print on European A4 paper. \def\afourpaper{{\globaldefs = 1 \parskip = 3pt plus 2pt minus 1pt @@ -6680,7 +9019,7 @@ should work if nowhere else does.} % \global\normaloffset = -6mm % \global\bindingoffset = 10mm % @end tex - \internalpagesizes{51\baselineskip}{160mm} + \internalpagesizes{673.2pt}{160mm}% that's 51 lines {\voffset}{\hoffset}% {\bindingoffset}{44pt}% {297mm}{210mm}% @@ -6745,7 +9084,7 @@ should work if nowhere else does.} \parskip = 3pt plus 2pt minus 1pt \setleading{\textleading}% % - \dimen0 = #1 + \dimen0 = #1\relax \advance\dimen0 by \voffset % \dimen2 = \hsize @@ -6764,6 +9103,9 @@ should work if nowhere else does.} \message{and turning on texinfo input format.} +% DEL is a comment character, in case @c does not suffice. +\catcode`\^^? = 14 + % Define macros to output various characters with catcode for normal text. \catcode`\"=\other \catcode`\~=\other @@ -6817,6 +9159,7 @@ should work if nowhere else does.} \catcode`\_=\active \def_{\ifusingtt\normalunderscore\_} +\let\realunder=_ % Subroutine for the previous macro. \def\_{\leavevmode \kern.07em \vbox{\hrule width.3em height.1ex}\kern .07em } @@ -6839,6 +9182,13 @@ should work if nowhere else does.} % \otherifyactive is called near the end of this file. \def\otherifyactive{\catcode`+=\other \catcode`\_=\other} +% Used sometimes to turn off (effectively) the active characters even after +% parsing them. +\def\turnoffactive{% + \normalturnoffactive + \otherbackslash +} + \catcode`\@=0 % \backslashcurfont outputs one backslash character in current font, @@ -6846,27 +9196,29 @@ should work if nowhere else does.} \global\chardef\backslashcurfont=`\\ \global\let\rawbackslashxx=\backslashcurfont % let existing .??s files work +% \realbackslash is an actual character `\' with catcode other, and +% \doublebackslash is two of them (for the pdf outlines). +{\catcode`\\=\other @gdef@realbackslash{\} @gdef@doublebackslash{\\}} + +% In texinfo, backslash is an active character; it prints the backslash +% in fixed width font. +\catcode`\\=\active +@def@normalbackslash{{@tt@backslashcurfont}} +% On startup, @fixbackslash assigns: +% @let \ = @normalbackslash + % \rawbackslash defines an active \ to do \backslashcurfont. % \otherbackslash defines an active \ to be a literal `\' character with % catcode other. -{\catcode`\\=\active - @gdef@rawbackslash{@let\=@backslashcurfont} - @gdef@otherbackslash{@let\=@realbackslash} -} - -% \realbackslash is an actual character `\' with catcode other. -{\catcode`\\=\other @gdef@realbackslash{\}} - -% \normalbackslash outputs one backslash in fixed width font. -\def\normalbackslash{{\tt\backslashcurfont}} +@gdef@rawbackslash{@let\=@backslashcurfont} +@gdef@otherbackslash{@let\=@realbackslash} -\catcode`\\=\active - -% Used sometimes to turn off (effectively) the active characters -% even after parsing them. -@def@turnoffactive{% +% Same as @turnoffactive except outputs \ as {\tt\char`\\} instead of +% the literal character `\'. +% +@def@normalturnoffactive{% + @let\=@normalbackslash @let"=@normaldoublequote - @let\=@realbackslash @let~=@normaltilde @let^=@normalcaret @let_=@normalunderscore @@ -6875,15 +9227,11 @@ should work if nowhere else does.} @let>=@normalgreater @let+=@normalplus @let$=@normaldollar %$ font-lock fix + @markupsetuplqdefault + @markupsetuprqdefault @unsepspaces } -% Same as @turnoffactive except outputs \ as {\tt\char`\\} instead of -% the literal character `\'. (Thus, \ is not expandable when this is in -% effect.) -% -@def@normalturnoffactive{@turnoffactive @let\=@normalbackslash} - % Make _ and + \other characters, temporarily. % This is canceled by @fixbackslash. @otherifyactive @@ -6896,9 +9244,9 @@ should work if nowhere else does.} @global@let\ = @eatinput % On the other hand, perhaps the file did not have a `\input texinfo'. Then -% the first `\{ in the file would cause an error. This macro tries to fix +% the first `\' in the file would cause an error. This macro tries to fix % that, assuming it is called before the first `\' could plausibly occur. -% Also back turn on active characters that might appear in the input +% Also turn back on active characters that might appear in the input % file name, in case not using a pre-dumped format. % @gdef@fixbackslash{% @@ -6915,9 +9263,21 @@ should work if nowhere else does.} @catcode`@# = @other @catcode`@% = @other +@c Finally, make ` and ' active, so that txicodequoteundirected and +@c txicodequotebacktick work right in, e.g., @w{@code{`foo'}}. If we +@c don't make ` and ' active, @code will not get them as active chars. +@c Do this last of all since we use ` in the previous @catcode assignments. +@catcode`@'=@active +@catcode`@`=@active +@markupsetuplqdefault +@markupsetuprqdefault + +@c Gnulib now utterly and painfully insists on no trailing whitespace. +@c So we have to nuke it. @c Local variables: @c eval: (add-hook 'write-file-hooks 'time-stamp) +@c eval: (add-hook 'write-file-hooks 'nuke-trailing-whitespace) @c page-delimiter: "^\\\\message" @c time-stamp-start: "def\\\\texinfoversion{" @c time-stamp-format: "%:y-%02m-%02d.%02H" |