diff options
36 files changed, 172 insertions, 337 deletions
diff --git a/gdb/testsuite/ChangeLog b/gdb/testsuite/ChangeLog index c022aec..f4d180e 100644 --- a/gdb/testsuite/ChangeLog +++ b/gdb/testsuite/ChangeLog @@ -1,5 +1,18 @@ 2013-06-27 Tom Tromey <tromey@redhat.com> + * call-ar-st.exp, call-rt-st.exp, call-sc.exp, + call-signal-resume.exp, call-strs.exp, callexit.exp, + callfuncs.exp, catch-load.exp, catch-syscall.exp, charset.exp, + checkpoint.exp, chng-syms.exp, code-expr.exp, code_elim.exp, + commands.exp, completion.exp, complex.exp, cond-expr.exp, + condbreak.exp, consecutive.exp, constvars.exp, corefile.exp, + ctxobj.exp, cursal.exp, cvexpr.exp, dbx.exp, default.exp, + define.exp, del.exp, detach.exp, dfp-test.exp, display.exp, + dmsym.exp, dump.exp, dup-sect.exp: Use standard_testfile, + standard_output_file, prepare_for_testing, clean_restart. + +2013-06-27 Tom Tromey <tromey@redhat.com> + * a2-run.exp, all-bin.exp, annota1.exp, annota3.exp, anon.exp, args.exp, arithmet.exp, arrayidx.exp, assign.exp, async-shell.exp, async.exp, attach-pie-misread.exp, attach-pie-noexec.exp, diff --git a/gdb/testsuite/gdb.base/call-ar-st.exp b/gdb/testsuite/gdb.base/call-ar-st.exp index 925d2af..21df59d 100644 --- a/gdb/testsuite/gdb.base/call-ar-st.exp +++ b/gdb/testsuite/gdb.base/call-ar-st.exp @@ -17,21 +17,21 @@ -set testfile "call-ar-st" -set srcfile ${testfile}.c -set binfile ${objdir}/${subdir}/${testfile} +standard_testfile # Test depends on printf, which the sparclet stub doesn't support. if { [istarget "sparclet-*-*"] } { return 0 } -if { [gdb_compile "${srcdir}/${subdir}/${srcfile}" "${binfile}" executable {debug}] != "" } { - untested "couldn't compile ${srcdir}/${subdir}/${srcfile}" - return -1 +# Some targets can't call functions, so don't even bother with this +# test. +if [target_info exists gdb,cannot_call_functions] { + setup_xfail "*-*-*" 2416 + fail "This target can not call functions" + continue } - # Create and source the file that provides information about the compiler # used to compile the test case. @@ -39,23 +39,15 @@ if [get_compiler_info] { return -1 } -# Some targets can't call functions, so don't even bother with this -# test. -if [target_info exists gdb,cannot_call_functions] { - setup_xfail "*-*-*" 2416 - fail "This target can not call functions" - continue +if {[prepare_for_testing $testfile.exp $testfile $srcfile debug]} { + untested $testfile.exp + return -1 } + set oldtimeout $timeout set timeout [expr "$timeout + 60"] -# Start with a fresh gdb. - -gdb_exit -gdb_start -gdb_reinitialize_dir $srcdir/$subdir -gdb_load ${binfile} gdb_test_no_output "set print sevenbit-strings" gdb_test_no_output "set print address off" gdb_test_no_output "set width 0" diff --git a/gdb/testsuite/gdb.base/call-rt-st.exp b/gdb/testsuite/gdb.base/call-rt-st.exp index d71824c..f01a18f 100644 --- a/gdb/testsuite/gdb.base/call-rt-st.exp +++ b/gdb/testsuite/gdb.base/call-rt-st.exp @@ -21,10 +21,7 @@ -set testfile "call-rt-st" -set srcfile ${testfile}.c -set binfile ${objdir}/${subdir}/${testfile} - +standard_testfile .c # Test depends on printf, which the sparclet stub doesn't support. if { [istarget "sparclet-*-*"] } { @@ -55,10 +52,7 @@ if [target_info exists gdb,cannot_call_functions] { # Start with a fresh gdb. -gdb_exit -gdb_start -gdb_reinitialize_dir $srcdir/$subdir -gdb_load ${binfile} +clean_restart ${binfile} gdb_test_no_output "set print sevenbit-strings" gdb_test_no_output "set print address off" gdb_test_no_output "set width 0" diff --git a/gdb/testsuite/gdb.base/call-sc.exp b/gdb/testsuite/gdb.base/call-sc.exp index e62021b..d3bd8ad 100644 --- a/gdb/testsuite/gdb.base/call-sc.exp +++ b/gdb/testsuite/gdb.base/call-sc.exp @@ -28,9 +28,7 @@ if [target_info exists gdb,cannot_call_functions] { continue } -set testfile "call-sc" -set srcfile ${testfile}.c -set binfile ${objdir}/${subdir}/${testfile} +standard_testfile .c # Create and source the file that provides information about the # compiler used to compile the test case. @@ -47,7 +45,6 @@ proc start_scalars_test { type } { global testfile global srcfile global binfile - global objdir global subdir global srcdir global gdb_prompt @@ -57,7 +54,7 @@ proc start_scalars_test { type } { set flags "debug additional_flags=-DT=${type}" set testfile "call-sc-${type}" - set binfile ${objdir}/${subdir}/${testfile} + set binfile [standard_output_file ${testfile}] if { [gdb_compile "${srcdir}/${subdir}/${srcfile}" "${binfile}" executable "${flags}"] != "" } { # built the second test case since we can't use prototypes warning "Prototypes not supported, rebuilding with -DNO_PROTOTYPES" diff --git a/gdb/testsuite/gdb.base/call-signal-resume.exp b/gdb/testsuite/gdb.base/call-signal-resume.exp index b7c4c0b..656e8dc 100644 --- a/gdb/testsuite/gdb.base/call-signal-resume.exp +++ b/gdb/testsuite/gdb.base/call-signal-resume.exp @@ -31,9 +31,7 @@ if [target_info exists gdb,nosignals] { } -set testfile "call-signals" -set srcfile ${testfile}.c -set binfile ${objdir}/${subdir}/${testfile} +standard_testfile call-signals.c if { [gdb_compile "${srcdir}/${subdir}/${srcfile}" "${binfile}" executable {debug}] != "" } { untested call-signal-resume.exp @@ -61,10 +59,7 @@ proc get_dummy_frame_number { } { # Start with a fresh gdb. -gdb_exit -gdb_start -gdb_reinitialize_dir $srcdir/$subdir -gdb_load ${binfile} +clean_restart ${binfile} if { ![runto_main] } { fail "Can't run to main" diff --git a/gdb/testsuite/gdb.base/call-strs.exp b/gdb/testsuite/gdb.base/call-strs.exp index 37a2828..764912a 100644 --- a/gdb/testsuite/gdb.base/call-strs.exp +++ b/gdb/testsuite/gdb.base/call-strs.exp @@ -23,22 +23,13 @@ #debug strarg -set testfile "call-strs" -set srcfile ${testfile}.c -set binfile ${objdir}/${subdir}/${testfile} +standard_testfile # Test depends on printf, which the sparclet stub doesn't support. if { [istarget "sparclet-*-*"] } { return 0 } -if { [gdb_compile "${srcdir}/${subdir}/${srcfile}" "${binfile}" executable {debug}] != "" } { - untested call-strs.exp - return -1 -} - - - # Some targets can't call functions, so don't even bother with this # test. if [target_info exists gdb,cannot_call_functions] { @@ -48,12 +39,11 @@ if [target_info exists gdb,cannot_call_functions] { } -# Start with a fresh gdb. +if {[prepare_for_testing $testfile.exp $testfile $srcfile debug]} { + untested $testfile.exp + return -1 +} -gdb_exit -gdb_start -gdb_reinitialize_dir $srcdir/$subdir -gdb_load ${binfile} gdb_test_no_output "set print sevenbit-strings" gdb_test_no_output "set print address off" gdb_test_no_output "set print symbol off" diff --git a/gdb/testsuite/gdb.base/callexit.exp b/gdb/testsuite/gdb.base/callexit.exp index 87d2d91..e33d5f7 100644 --- a/gdb/testsuite/gdb.base/callexit.exp +++ b/gdb/testsuite/gdb.base/callexit.exp @@ -14,9 +14,7 @@ # along with this program. If not, see <http://www.gnu.org/licenses/>. -set testfile "callexit" -set srcfile ${testfile}.c -set binfile ${objdir}/${subdir}/${testfile} +standard_testfile .c if { [gdb_compile "${srcdir}/${subdir}/${srcfile}" "${binfile}" executable {debug}] != "" } { untested callexit.exp @@ -33,10 +31,7 @@ if [target_info exists gdb,cannot_call_functions] { # Start with a fresh gdb. -gdb_exit -gdb_start -gdb_reinitialize_dir $srcdir/$subdir -gdb_load ${binfile} +clean_restart ${binfile} if { ![runto_main] } { fail "Can't run to main" diff --git a/gdb/testsuite/gdb.base/callfuncs.exp b/gdb/testsuite/gdb.base/callfuncs.exp index 6e1ebab..e3f49f9 100644 --- a/gdb/testsuite/gdb.base/callfuncs.exp +++ b/gdb/testsuite/gdb.base/callfuncs.exp @@ -16,9 +16,7 @@ # This file was written by Fred Fish. (fnf@cygnus.com) # and modified by Bob Manson. (manson@cygnus.com) -set testfile "callfuncs" -set srcfile ${testfile}.c -set binfile ${objdir}/${subdir}/${testfile} +standard_testfile set compile_flags {debug} if [support_complex_tests] { diff --git a/gdb/testsuite/gdb.base/catch-load.exp b/gdb/testsuite/gdb.base/catch-load.exp index c66318e..4bcaa44 100644 --- a/gdb/testsuite/gdb.base/catch-load.exp +++ b/gdb/testsuite/gdb.base/catch-load.exp @@ -24,9 +24,7 @@ if {[get_compiler_info]} { return -1 } -set testfile catch-load -set srcfile ${testfile}.c -set binfile ${objdir}/${subdir}/${testfile} +standard_testfile .c if { [gdb_compile "${srcdir}/${subdir}/${srcfile}" "${binfile}" executable {debug shlib_load}] != "" } { untested catch-load.exp return -1 @@ -34,7 +32,7 @@ if { [gdb_compile "${srcdir}/${subdir}/${srcfile}" "${binfile}" executable {deb set testfile2 catch-load-so set srcfile2 ${testfile2}.c -set binfile2 ${objdir}/${subdir}/${testfile2}.so +set binfile2 [standard_output_file ${testfile2}.so] set binfile2_dlopen [shlib_target_file ${testfile2}.so] if { [gdb_compile_shlib "${srcdir}/${subdir}/${srcfile2}" ${binfile2} {debug}] != "" } { untested catch-load.exp diff --git a/gdb/testsuite/gdb.base/catch-syscall.exp b/gdb/testsuite/gdb.base/catch-syscall.exp index 4a05292..395fcd4 100644 --- a/gdb/testsuite/gdb.base/catch-syscall.exp +++ b/gdb/testsuite/gdb.base/catch-syscall.exp @@ -38,10 +38,7 @@ if { ![istarget "x86_64-*-linux*"] && ![istarget "i\[34567\]86-*-linux*"] continue } -global srcfile -set testfile "catch-syscall" -set srcfile ${testfile}.c -set binfile ${objdir}/${subdir}/${testfile} +standard_testfile # All (but the last) syscalls from the example code # They are ordered according to the file, so do not change this. diff --git a/gdb/testsuite/gdb.base/charset.exp b/gdb/testsuite/gdb.base/charset.exp index d8d471e..a5dbb28 100644 --- a/gdb/testsuite/gdb.base/charset.exp +++ b/gdb/testsuite/gdb.base/charset.exp @@ -21,10 +21,9 @@ # Test GDB's character set support. -set testfile "charset" -set srcfile ${testfile}.c -set srcmallocfile ${testfile}-malloc.c -if { [prepare_for_testing ${testfile}.exp ${testfile} [list $srcfile $srcmallocfile]] } { +standard_testfile .c charset-malloc.c + +if { [prepare_for_testing ${testfile}.exp ${testfile} [list $srcfile $srcfile2]] } { return -1 } diff --git a/gdb/testsuite/gdb.base/checkpoint.exp b/gdb/testsuite/gdb.base/checkpoint.exp index d9c28e06..b86fead 100644 --- a/gdb/testsuite/gdb.base/checkpoint.exp +++ b/gdb/testsuite/gdb.base/checkpoint.exp @@ -25,9 +25,7 @@ if {![istarget "*-*-linux*"]} then { } -set testfile "checkpoint" -set srcfile ${testfile}.c -set binfile ${objdir}/${subdir}/${testfile} +standard_testfile .c if { [gdb_compile "${srcdir}/${subdir}/${srcfile}" "${binfile}" executable {debug}] != "" } { untested checkpoint.exp @@ -36,10 +34,7 @@ if { [gdb_compile "${srcdir}/${subdir}/${srcfile}" "${binfile}" executable {deb # Start with a fresh gdb -gdb_exit -gdb_start -gdb_reinitialize_dir $srcdir/$subdir -gdb_load ${binfile} +clean_restart ${binfile} global gdb_prompt diff --git a/gdb/testsuite/gdb.base/chng-syms.exp b/gdb/testsuite/gdb.base/chng-syms.exp index 8ae0390..d729f1a 100644 --- a/gdb/testsuite/gdb.base/chng-syms.exp +++ b/gdb/testsuite/gdb.base/chng-syms.exp @@ -18,9 +18,7 @@ # Test that GDB cleans up properly after errors that result when a # breakpoint is reset. -set testfile "chng-syms" -set srcfile ${testfile}.c -set binfile ${objdir}/${subdir}/${testfile} +standard_testfile .c if { [gdb_compile "${srcdir}/${subdir}/${srcfile}" "${binfile}" executable {debug additional_flags=-DVARIABLE=var1}] != "" } { untested chng-syms.exp @@ -53,10 +51,7 @@ proc expect_to_stop_here { ident } { return 1 } -gdb_exit -gdb_start -gdb_reinitialize_dir $srcdir/$subdir -gdb_load ${binfile} +clean_restart ${binfile} gdb_test "break stop_here if (var1 == 42)" \ "Breakpoint.*at.* file .*$srcfile, line.*" \ diff --git a/gdb/testsuite/gdb.base/code-expr.exp b/gdb/testsuite/gdb.base/code-expr.exp index 529a699..de2f03a 100644 --- a/gdb/testsuite/gdb.base/code-expr.exp +++ b/gdb/testsuite/gdb.base/code-expr.exp @@ -22,19 +22,14 @@ # test running programs # -set testfile "cvexpr" -set srcfile ${testfile}.c -set binfile ${objdir}/${subdir}/${testfile} +standard_testfile cvexpr.c if { [gdb_compile "${srcdir}/${subdir}/${srcfile}" "${binfile}" executable {debug}] != "" } { untested code-expr.exp return -1 } -gdb_exit -gdb_start -gdb_reinitialize_dir $srcdir/$subdir -gdb_load ${binfile} +clean_restart ${binfile} gdb_test_no_output "set print sevenbit-strings" gdb_test_no_output "set print address off" diff --git a/gdb/testsuite/gdb.base/code_elim.exp b/gdb/testsuite/gdb.base/code_elim.exp index 4be9200..c603077 100644 --- a/gdb/testsuite/gdb.base/code_elim.exp +++ b/gdb/testsuite/gdb.base/code_elim.exp @@ -20,8 +20,8 @@ set testfile1 code_elim1 set testfile2 code_elim2 set srcfile1 ${testfile1}.c set srcfile2 ${testfile2}.c -set binfile1 ${objdir}/${subdir}/${testfile1} -set binfile2 ${objdir}/${subdir}/${testfile2} +set binfile1 [standard_output_file ${testfile1}] +set binfile2 [standard_output_file ${testfile2}] set opts [list debug] lappend opts "additional_flags=-ffunction-sections" lappend opts "additional_flags=-fdata-sections" diff --git a/gdb/testsuite/gdb.base/commands.exp b/gdb/testsuite/gdb.base/commands.exp index 39ad3f3..b608e0c 100644 --- a/gdb/testsuite/gdb.base/commands.exp +++ b/gdb/testsuite/gdb.base/commands.exp @@ -17,6 +17,8 @@ # test special commands (if, while, etc) # +standard_testfile + if { [prepare_for_testing commands.exp commands run.c {debug additional_flags=-DFAKEARGV}] } { return -1 } @@ -555,7 +557,9 @@ proc stray_arg0_test { } { # Test that GDB is able to source a file with an indented comment. proc source_file_with_indented_comment {} { - set fd [open "file1" w] + set file1 [standard_output_file file1] + + set fd [open "$file1" w] puts $fd \ {define my_fun #indented comment @@ -563,40 +567,44 @@ end echo Done!\n} close $fd - gdb_test "source file1" "Done!" "source file with indented comment" + gdb_test "source $file1" "Done!" "source file with indented comment" } # Test that GDB can handle arguments when sourcing files recursively. # If the arguments are overwritten with ####### then the test has failed. proc recursive_source_test {} { - set fd [open "file1" w] + set file1 [standard_output_file file1] + set file2 [standard_output_file file2] + set file3 [standard_output_file file3] + + set fd [open "$file1" w] puts $fd \ -{source file2 -abcdef qwerty} +"source $file2 +abcdef qwerty" close $fd - set fd [open "file2" w] + set fd [open "$file2" w] puts $fd \ -{define abcdef - echo 1: <<<$arg0>>>\n - source file3 - echo 2: <<<$arg0>>>\n -end} +"define abcdef + echo 1: <<<\$arg0>>>\\n + source $file3 + echo 2: <<<\$arg0>>>\\n +end" close $fd - set fd [open "file3" w] + set fd [open "$file3" w] puts $fd \ "echo in file3\\n #################################################################" close $fd - gdb_test "source file1" \ + gdb_test "source $file1" \ "1: <<<qwerty>>>\[\r\n]+in file3\[\r\n]+2: <<<qwerty>>>" \ "recursive source test" - file delete file1 - file delete file2 - file delete file3 + file delete $file1 + file delete $file2 + file delete $file3 } proc gdb_test_no_prompt { command result msg } { diff --git a/gdb/testsuite/gdb.base/completion.exp b/gdb/testsuite/gdb.base/completion.exp index 80cfbff..b3147da 100644 --- a/gdb/testsuite/gdb.base/completion.exp +++ b/gdb/testsuite/gdb.base/completion.exp @@ -50,35 +50,17 @@ # test running programs # -set testfile "break" -set srcfile ${testfile}.c -set srcfile1 ${testfile}1.c -set binfile ${objdir}/${subdir}/${testfile} - -if { [gdb_compile "${srcdir}/${subdir}/${srcfile}" "${binfile}0.o" object {debug nowarnings}] != "" } { - untested completion.exp - return -1 -} - -if { [gdb_compile "${srcdir}/${subdir}/${srcfile1}" "${binfile}1.o" object {debug nowarnings}] != "" } { - untested completion.exp - return -1 -} - -if { [gdb_compile "${binfile}0.o ${binfile}1.o" "${binfile}" executable {debug nowarnings}] != "" } { - untested completion.exp - return -1 -} +standard_testfile break.c break1.c if [get_compiler_info] { return -1 } -gdb_exit - -gdb_start -gdb_reinitialize_dir $srcdir/$subdir -gdb_load ${binfile} +if {[prepare_for_testing $testfile.exp $testfile \ + [list $srcfile $srcfile2] {debug nowarnings}]} { + untested $testfile.exp + return -1 +} if ![runto_main] then { perror "tests suppressed" diff --git a/gdb/testsuite/gdb.base/complex.exp b/gdb/testsuite/gdb.base/complex.exp index 5cf4845..f29b405 100644 --- a/gdb/testsuite/gdb.base/complex.exp +++ b/gdb/testsuite/gdb.base/complex.exp @@ -14,28 +14,16 @@ # along with this program. If not, see <http://www.gnu.org/licenses/>. -set testfile complex -set srcfile ${testfile}.c -set binfile ${objdir}/${subdir}/${testfile} -set options debug - -if { [gdb_compile "${srcdir}/${subdir}/${srcfile}" "${binfile}" executable $options] != "" } { - # No support for __complex__, presumably. - unsupported "print complex packed value in C" - unsupported "print complex value in C" - return 0 -} - -# Start with a fresh gdb. +standard_testfile if [get_compiler_info] { return -1 } -gdb_exit -gdb_start -gdb_reinitialize_dir $srcdir/$subdir -gdb_load $binfile +if {[prepare_for_testing $testfile.exp $testfile $srcfile debug]} { + untested $testfile.exp + return -1 +} if [runto f2] then { get_debug_format diff --git a/gdb/testsuite/gdb.base/cond-expr.exp b/gdb/testsuite/gdb.base/cond-expr.exp index 95dbe03..4358844 100644 --- a/gdb/testsuite/gdb.base/cond-expr.exp +++ b/gdb/testsuite/gdb.base/cond-expr.exp @@ -31,19 +31,15 @@ # haven't tried to compile one, or the compilation failed for some reason. # In either case, just notify the user and skip the tests in this file. -set testfile "int-type" -set srcfile ${testfile}.c -set binfile ${objdir}/${subdir}/${testfile} +standard_testfile int-type.c + if { [gdb_compile "${srcdir}/${subdir}/${srcfile}" "${binfile}" executable {debug nowarnings}] != "" } { untested cond-expr.exp return -1 } -gdb_exit -gdb_start -gdb_reinitialize_dir $srcdir/$subdir -gdb_load ${binfile} +clean_restart ${binfile} if ![runto_main] then { diff --git a/gdb/testsuite/gdb.base/condbreak.exp b/gdb/testsuite/gdb.base/condbreak.exp index c09228c..faccb5b 100644 --- a/gdb/testsuite/gdb.base/condbreak.exp +++ b/gdb/testsuite/gdb.base/condbreak.exp @@ -21,46 +21,30 @@ # test running programs # -set testfile "break" -set srcfile ${testfile}.c -set srcfile1 ${testfile}1.c -set binfile ${objdir}/${subdir}/${testfile} - -if { [gdb_compile "${srcdir}/${subdir}/${srcfile}" "${binfile}0.o" object {debug nowarnings}] != "" } { - untested condbreak.exp - return -1 -} - -if { [gdb_compile "${srcdir}/${subdir}/${srcfile1}" "${binfile}1.o" object {debug nowarnings}] != "" } { - untested condbreak.exp - return -1 -} +standard_testfile break.c break1.c -if { [gdb_compile "${binfile}0.o ${binfile}1.o" "${binfile}" executable {debug nowarnings}] != "" } { - untested condbreak.exp - return -1 +if {[prepare_for_testing ${testfile}.exp $testfile [list $srcfile $srcfile2] \ + {debug nowarnings}]} { + return -1 } if [get_compiler_info] { return -1 } -gdb_exit -gdb_start -gdb_reinitialize_dir $srcdir/$subdir -gdb_load ${binfile} +clean_restart ${binfile} set bp_location1 [gdb_get_line_number "set breakpoint 1 here"] set bp_location6 [gdb_get_line_number "set breakpoint 6 here"] -set bp_location8 [gdb_get_line_number "set breakpoint 8 here" $srcfile1] -set bp_location9 [gdb_get_line_number "set breakpoint 9 here" $srcfile1] -set bp_location13 [gdb_get_line_number "set breakpoint 13 here" $srcfile1] -set bp_location14 [gdb_get_line_number "set breakpoint 14 here" $srcfile1] -set bp_location15 [gdb_get_line_number "set breakpoint 15 here" $srcfile1] -set bp_location16 [gdb_get_line_number "set breakpoint 16 here" $srcfile1] -set bp_location17 [gdb_get_line_number "set breakpoint 17 here" $srcfile1] -set bp_location18 [gdb_get_line_number "set breakpoint 18 here" $srcfile1] +set bp_location8 [gdb_get_line_number "set breakpoint 8 here" $srcfile2] +set bp_location9 [gdb_get_line_number "set breakpoint 9 here" $srcfile2] +set bp_location13 [gdb_get_line_number "set breakpoint 13 here" $srcfile2] +set bp_location14 [gdb_get_line_number "set breakpoint 14 here" $srcfile2] +set bp_location15 [gdb_get_line_number "set breakpoint 15 here" $srcfile2] +set bp_location16 [gdb_get_line_number "set breakpoint 16 here" $srcfile2] +set bp_location17 [gdb_get_line_number "set breakpoint 17 here" $srcfile2] +set bp_location18 [gdb_get_line_number "set breakpoint 18 here" $srcfile2] # # test break at function @@ -73,7 +57,7 @@ gdb_test "break main" \ # test conditional break at function # gdb_test "break marker1 if 1==1" \ - "Breakpoint.*at.* file .*$srcfile1, line.*" + "Breakpoint.*at.* file .*$srcfile2, line.*" gdb_test_no_output "delete 2" @@ -89,7 +73,7 @@ gdb_test_no_output "delete 3" # test conditional break at function # gdb_test "break marker1 if (1==1)" \ - "Breakpoint.*at.* file .*$srcfile1, line.*" + "Breakpoint.*at.* file .*$srcfile2, line.*" # # test conditional break at line number @@ -98,16 +82,16 @@ gdb_test "break $srcfile:$bp_location1 if (1==1)" \ "Breakpoint.*at.* file .*$srcfile, line $bp_location1\\." gdb_test "break marker2 if (a==43)" \ - "Breakpoint.*at.* file .*$srcfile1, line.*" + "Breakpoint.*at.* file .*$srcfile2, line.*" # # Check break involving inferior function call. # Ensure there is at least one additional breakpoint with higher VMA. # gdb_test "break marker3 if (multi_line_if_conditional(1,1,1)==0)" \ - "Breakpoint.*at.* file .*$srcfile1, line.*" + "Breakpoint.*at.* file .*$srcfile2, line.*" gdb_test "break marker4" \ - "Breakpoint.*at.* file .*$srcfile1, line.*" + "Breakpoint.*at.* file .*$srcfile2, line.*" # # check to see what breakpoints are set @@ -129,15 +113,15 @@ if {$hp_aCC_compiler} { gdb_test "info break" \ "Num Type\[ \]+Disp Enb Address\[ \]+What.* \[0-9\]+\[\t \]+breakpoint keep y.* in main at .*$srcfile:$bp_location6.* -\[0-9\]+\[\t \]+breakpoint keep y.* in marker1$marker1_proto at .*$srcfile1:($bp_location15|$bp_location16).* +\[0-9\]+\[\t \]+breakpoint keep y.* in marker1$marker1_proto at .*$srcfile2:($bp_location15|$bp_location16).* \[\t \]+stop only if \\(1==1\\).* \[0-9\]+\[\t \]+breakpoint keep y.* in main at .*$srcfile:$bp_location1.* \[\t \]+stop only if \\(1==1\\).* -\[0-9\]+\[\t \]+breakpoint keep y.* in marker2$marker2_proto at .*$srcfile1:($bp_location8|$bp_location9).* +\[0-9\]+\[\t \]+breakpoint keep y.* in marker2$marker2_proto at .*$srcfile2:($bp_location8|$bp_location9).* \[\t \]+stop only if \\(a==43\\).* -\[0-9\]+\[\t \]+breakpoint keep y.* in marker3$marker3_proto at .*$srcfile1:($bp_location17|$bp_location18).* +\[0-9\]+\[\t \]+breakpoint keep y.* in marker3$marker3_proto at .*$srcfile2:($bp_location17|$bp_location18).* \[\t \]+stop only if \\(multi_line_if_conditional\\(1,1,1\\)==0\\).* -\[0-9\]+\[\t \]+breakpoint keep y.* in marker4$marker4_proto at .*$srcfile1:($bp_location13|$bp_location14).*" \ +\[0-9\]+\[\t \]+breakpoint keep y.* in marker4$marker4_proto at .*$srcfile2:($bp_location13|$bp_location14).*" \ "breakpoint info" @@ -195,10 +179,10 @@ gdb_test "continue" "Continuing\\..*Breakpoint \[0-9\]+, main \\(argc=.*, argv=. # # Until the Dwarf2 writer gets fixed, I'm going to XFAIL its behavior. gdb_test_multiple "continue" "run until breakpoint at marker1" { - -re "Continuing\\..*Breakpoint \[0-9\]+, marker1 \\(\\) at .*$srcfile1:($bp_location15|$bp_location16).*($bp_location15|$bp_location16)\[\t \]+.*$gdb_prompt $" { + -re "Continuing\\..*Breakpoint \[0-9\]+, marker1 \\(\\) at .*$srcfile2:($bp_location15|$bp_location16).*($bp_location15|$bp_location16)\[\t \]+.*$gdb_prompt $" { pass "run until breakpoint at marker1" } - -re "Continuing\\..*Breakpoint \[0-9\]+, $hex in marker1 \\(\\) at .*$srcfile1:($bp_location15|$bp_location16).*($bp_location15|$bp_location16)\[\t \]+.*$gdb_prompt $" { + -re "Continuing\\..*Breakpoint \[0-9\]+, $hex in marker1 \\(\\) at .*$srcfile2:($bp_location15|$bp_location16).*($bp_location15|$bp_location16)\[\t \]+.*$gdb_prompt $" { xfail "run until breakpoint at marker1" } } @@ -207,10 +191,10 @@ gdb_test_multiple "continue" "run until breakpoint at marker1" { # Same issues here as above. setup_xfail hppa2.0w-*-* 11512CLLbs gdb_test_multiple "continue" "run until breakpoint at marker2" { - -re "Continuing\\..*Breakpoint \[0-9\]+, marker2 \\(a=43\\) at .*$srcfile1:($bp_location8|$bp_location9).*($bp_location8|$bp_location9)\[\t \]+.*$gdb_prompt $" { + -re "Continuing\\..*Breakpoint \[0-9\]+, marker2 \\(a=43\\) at .*$srcfile2:($bp_location8|$bp_location9).*($bp_location8|$bp_location9)\[\t \]+.*$gdb_prompt $" { pass "run until breakpoint at marker2" } - -re "Continuing\\..*Breakpoint \[0-9\]+, $hex in marker2 \\(a=43\\) at .*$srcfile1:($bp_location8|$bp_location9).*($bp_location8|$bp_location9)\[\t \]+.*$gdb_prompt $" { + -re "Continuing\\..*Breakpoint \[0-9\]+, $hex in marker2 \\(a=43\\) at .*$srcfile2:($bp_location8|$bp_location9).*($bp_location8|$bp_location9)\[\t \]+.*$gdb_prompt $" { xfail "run until breakpoint at marker2" } } @@ -244,20 +228,20 @@ gdb_test "break *main if (1==1) ta 999" \ set test "run until breakpoint at marker3" gdb_test_multiple "continue" $test { - -re "Continuing\\..*Breakpoint \[0-9\]+, marker3 \\(a=$hex \"stack\", b=$hex \"trace\"\\) at .*$srcfile1:($bp_location17|$bp_location18).*($bp_location17|$bp_location18)\[\t \]+.*$gdb_prompt $" { + -re "Continuing\\..*Breakpoint \[0-9\]+, marker3 \\(a=$hex \"stack\", b=$hex \"trace\"\\) at .*$srcfile2:($bp_location17|$bp_location18).*($bp_location17|$bp_location18)\[\t \]+.*$gdb_prompt $" { pass $test } - -re "Continuing\\..*Breakpoint \[0-9\]+, $hex in marker3 \\(a=$hex \"stack\", b=$hex \"trace\"\\) at .*$srcfile1:($bp_location17|$bp_location18).*($bp_location17|$bp_location18)\[\t \]+.*$gdb_prompt $" { + -re "Continuing\\..*Breakpoint \[0-9\]+, $hex in marker3 \\(a=$hex \"stack\", b=$hex \"trace\"\\) at .*$srcfile2:($bp_location17|$bp_location18).*($bp_location17|$bp_location18)\[\t \]+.*$gdb_prompt $" { xfail $test } } set test "run until breakpoint at marker4" gdb_test_multiple "continue" $test { - -re "Continuing\\..*Breakpoint \[0-9\]+, marker4 \\(d=177601976\\) at .*$srcfile1:($bp_location13|$bp_location14).*($bp_location13|$bp_location14)\[\t \]+.*$gdb_prompt $" { + -re "Continuing\\..*Breakpoint \[0-9\]+, marker4 \\(d=177601976\\) at .*$srcfile2:($bp_location13|$bp_location14).*($bp_location13|$bp_location14)\[\t \]+.*$gdb_prompt $" { pass $test } - -re "Continuing\\..*Breakpoint \[0-9\]+, $hex in marker4 \\(d=177601976\\) at .*$srcfile1:($bp_location13|$bp_location14).*($bp_location13|$bp_location14)\[\t \]+.*$gdb_prompt $" { + -re "Continuing\\..*Breakpoint \[0-9\]+, $hex in marker4 \\(d=177601976\\) at .*$srcfile2:($bp_location13|$bp_location14).*($bp_location13|$bp_location14)\[\t \]+.*$gdb_prompt $" { xfail $test } } diff --git a/gdb/testsuite/gdb.base/consecutive.exp b/gdb/testsuite/gdb.base/consecutive.exp index dd29431..be70e9f 100644 --- a/gdb/testsuite/gdb.base/consecutive.exp +++ b/gdb/testsuite/gdb.base/consecutive.exp @@ -20,24 +20,17 @@ # -set testfile "consecutive" -set srcfile ${testfile}.c -set binfile ${objdir}/${subdir}/${testfile} +standard_testfile -if { [gdb_compile "${srcdir}/${subdir}/${srcfile}" "${binfile}" executable {debug nowarnings}] != "" } { - untested consecutive.exp +if [get_compiler_info] { return -1 } -if [get_compiler_info] { +if {[prepare_for_testing $testfile.exp $testfile $srcfile {debug nowarnings}]} { + untested $testfile.exp return -1 } -gdb_exit -gdb_start -gdb_reinitialize_dir $srcdir/$subdir -gdb_load ${binfile} - if ![runto_main] then { perror "couldn't run to breakpoint" continue diff --git a/gdb/testsuite/gdb.base/constvars.exp b/gdb/testsuite/gdb.base/constvars.exp index 0e07349..554e265 100644 --- a/gdb/testsuite/gdb.base/constvars.exp +++ b/gdb/testsuite/gdb.base/constvars.exp @@ -27,9 +27,7 @@ # test running programs # -set testfile "constvars" -set srcfile ${testfile}.c -set binfile ${objdir}/${subdir}/${testfile} +standard_testfile .c # Create and source the file that provides information about the compiler # used to compile the test case. @@ -42,10 +40,7 @@ if { [gdb_compile "${srcdir}/${subdir}/${srcfile}" "${binfile}" executable debug return -1 } -gdb_exit -gdb_start -gdb_reinitialize_dir $srcdir/$subdir -gdb_load ${binfile} +clean_restart ${binfile} # diff --git a/gdb/testsuite/gdb.base/corefile.exp b/gdb/testsuite/gdb.base/corefile.exp index 054ed3e..24a33a3 100644 --- a/gdb/testsuite/gdb.base/corefile.exp +++ b/gdb/testsuite/gdb.base/corefile.exp @@ -21,13 +21,7 @@ if ![isnative] then { return } -set testfile "coremaker" -set srcfile ${testfile}.c -set binfile ${objdir}/${subdir}/${testfile} -if { [gdb_compile "${srcdir}/${subdir}/${srcfile}" "${binfile}" executable {debug}] != "" } { - untested corefile.exp - return -1 -} +standard_testfile coremaker.c # Create and source the file that provides information about the compiler # used to compile the test case. @@ -35,6 +29,11 @@ if [get_compiler_info] { return -1 } +if {[build_executable $testfile.exp $testfile $srcfile debug] == -1} { + untested $testfile.exp + return -1 +} + set corefile [core_find $binfile {coremmap.data}] if {$corefile == ""} { return 0 @@ -49,7 +48,7 @@ if {$corefile == ""} { # # Another problem is that on some systems (solaris for example), there # is apparently a limit on the length of a fully specified path to -# the coremaker executable, at about 80 chars. For this case, consider +# the corefile executable, at about 80 chars. For this case, consider # it a pass, but note that the program name is bad. gdb_exit @@ -65,7 +64,7 @@ expect { -re "Couldn't find .* registers in core file.*$gdb_prompt $" { fail "args: -core=[file tail $corefile] (couldn't find regs)" } - -re "Core was generated by .*coremaker.*\r\n\#0 .*\(\).*\r\n$gdb_prompt $" { + -re "Core was generated by .*corefile.*\r\n\#0 .*\(\).*\r\n$gdb_prompt $" { pass "args: -core=[file tail $corefile]" } -re "Core was generated by .*\r\n\#0 .*\(\).*\r\n$gdb_prompt $" { @@ -93,7 +92,7 @@ if $verbose>1 then { eval "spawn $GDB $INTERNAL_GDBFLAGS $GDBFLAGS $binfile -core=$corefile" expect { - -re "Core was generated by .*coremaker.*\r\n\#0 .*\(\).*\r\n$gdb_prompt $" { + -re "Core was generated by .*corefile.*\r\n\#0 .*\(\).*\r\n$gdb_prompt $" { pass "args: execfile -core=[file tail $corefile]" } -re "Core was generated by .*\r\n\#0 .*\(\).*\r\n$gdb_prompt $" { @@ -124,7 +123,7 @@ gdb_test_multiple "core-file $corefile" "core-file command" { send_gdb "y\n" exp_continue } - -re "Core was generated by .*coremaker.*\r\n\#0 .*\(\).*\r\n$gdb_prompt $" { + -re "Core was generated by .*corefile.*\r\n\#0 .*\(\).*\r\n$gdb_prompt $" { pass "core-file command" } -re "Core was generated by .*\r\n\#0 .*\(\).*\r\n$gdb_prompt $" { diff --git a/gdb/testsuite/gdb.base/ctxobj.exp b/gdb/testsuite/gdb.base/ctxobj.exp index cd68dfc..f803a12 100644 --- a/gdb/testsuite/gdb.base/ctxobj.exp +++ b/gdb/testsuite/gdb.base/ctxobj.exp @@ -30,8 +30,8 @@ set executable ctxobj-m set libsrc [list "${srcdir}/${subdir}/ctxobj-v.c" \ "${srcdir}/${subdir}/ctxobj-f.c"] -set libobj1 "${objdir}/${subdir}/libctxobj1.so" -set libobj2 "${objdir}/${subdir}/libctxobj2.so" +set libobj1 [standard_output_file libctxobj1.so] +set libobj2 [standard_output_file libctxobj2.so] set libobj1_opts { debug additional_flags=-fPIC additional_flags=-DVERSION=104 @@ -47,7 +47,7 @@ if { [gdb_compile_shlib $libsrc $libobj2 $libobj2_opts ] != "" } { return -1 } if { [gdb_compile "${srcdir}/${subdir}/${executable}.c" \ - "${objdir}/${subdir}/${executable}" \ + [standard_output_file ${executable}] \ executable \ [list debug shlib=${libobj1} shlib=${libobj2}]] != ""} { diff --git a/gdb/testsuite/gdb.base/cursal.exp b/gdb/testsuite/gdb.base/cursal.exp index a5840cb..fb58dd4 100644 --- a/gdb/testsuite/gdb.base/cursal.exp +++ b/gdb/testsuite/gdb.base/cursal.exp @@ -14,9 +14,7 @@ # along with this program. If not, see <http://www.gnu.org/licenses/>. -set testfile "cursal" -set srcfile ${testfile}.c -set binfile ${objdir}/${subdir}/${testfile} +standard_testfile if {[gdb_compile "${srcdir}/${subdir}/${srcfile}" "${binfile}" executable {debug}] != ""} { untested "Couldn't compile $srcfile" diff --git a/gdb/testsuite/gdb.base/cvexpr.exp b/gdb/testsuite/gdb.base/cvexpr.exp index 7ae8548..c5e4faf 100644 --- a/gdb/testsuite/gdb.base/cvexpr.exp +++ b/gdb/testsuite/gdb.base/cvexpr.exp @@ -22,19 +22,14 @@ # test running programs # -set testfile "cvexpr" -set srcfile ${testfile}.c -set binfile ${objdir}/${subdir}/${testfile} +standard_testfile .c if { [gdb_compile "${srcdir}/${subdir}/${srcfile}" "${binfile}" executable {debug}] != "" } { untested cvexpr.exp return -1 } -gdb_exit -gdb_start -gdb_reinitialize_dir $srcdir/$subdir -gdb_load ${binfile} +clean_restart ${binfile} gdb_test_no_output "set print sevenbit-strings" gdb_test_no_output "set print address off" diff --git a/gdb/testsuite/gdb.base/dbx.exp b/gdb/testsuite/gdb.base/dbx.exp index 31bda5d..7d89b81 100644 --- a/gdb/testsuite/gdb.base/dbx.exp +++ b/gdb/testsuite/gdb.base/dbx.exp @@ -14,28 +14,12 @@ # along with this program. If not, see <http://www.gnu.org/licenses/>. */ -set testfile1 "average" -set testfile2 "sum" -set testfile "dbx-test" -set binfile1 ${objdir}/${subdir}/${testfile1} -set binfile2 ${objdir}/${subdir}/${testfile2} -set binfile ${objdir}/${subdir}/${testfile} +standard_testfile average.c sum.c - - -if { [gdb_compile "${srcdir}/${subdir}/average.c" "${binfile1}.o" object {debug}] != "" } { - untested dbx.exp - return -1 -} - -if { [gdb_compile "${srcdir}/${subdir}/sum.c" "${binfile2}.o" object {debug}] != "" } { - untested dbx.exp - return -1 -} - -if { [gdb_compile "${binfile1}.o ${binfile2}.o" ${binfile} executable {debug}] != "" } { - untested dbx.exp - return -1 +if {[build_executable $testfile.exp $testfile \ + [list $srcfile $srcfile2] debug] == -1} { + untested $testfile.exp + return -1 } # diff --git a/gdb/testsuite/gdb.base/default.exp b/gdb/testsuite/gdb.base/default.exp index 9230ee8..e6fef15 100644 --- a/gdb/testsuite/gdb.base/default.exp +++ b/gdb/testsuite/gdb.base/default.exp @@ -521,6 +521,9 @@ gdb_test "set height" "Argument required .integer to set it to.*" "set height" gdb_test_no_output "set history expansion" "set history expansion" #test set history filename gdb_test "set history filename" "Argument required .filename to set it to.*" "set history filename" +# Make sure the history ends up in the right place. +gdb_test_no_output "set history filename [standard_output_file .gdb_history]" \ + "set the history filename" #test set history save gdb_test_no_output "set history save" "set history save" #test set history size diff --git a/gdb/testsuite/gdb.base/define.exp b/gdb/testsuite/gdb.base/define.exp index 9b7eef9..6b647f2 100644 --- a/gdb/testsuite/gdb.base/define.exp +++ b/gdb/testsuite/gdb.base/define.exp @@ -20,31 +20,13 @@ # test running programs # -set testfile "break" -set srcfile ${testfile}.c -set srcfile1 ${testfile}1.c -set binfile ${objdir}/${subdir}/${testfile} - -if { [gdb_compile "${srcdir}/${subdir}/${srcfile}" "${binfile}0.o" object {debug nowarnings}] != "" } { - untested define.exp - return -1 -} - -if { [gdb_compile "${srcdir}/${subdir}/${srcfile1}" "${binfile}1.o" object {debug nowarnings}] != "" } { - untested define.exp - return -1 -} +standard_testfile break.c break1.c -if { [gdb_compile "${binfile}0.o ${binfile}1.o" "${binfile}" executable {debug nowarnings}] != "" } { - untested define.exp - return -1 +if {[prepare_for_testing ${testfile}.exp ${testfile} \ + [list $srcfile $srcfile2] {debug nowarnings}]} { + return -1 } -gdb_exit -gdb_start -gdb_reinitialize_dir $srcdir/$subdir -gdb_load ${binfile} - set bp_location1 [gdb_get_line_number "set breakpoint 1 here"] set bp_location11 [gdb_get_line_number "set breakpoint 11 here"] diff --git a/gdb/testsuite/gdb.base/del.exp b/gdb/testsuite/gdb.base/del.exp index febcfc6..958d491 100644 --- a/gdb/testsuite/gdb.base/del.exp +++ b/gdb/testsuite/gdb.base/del.exp @@ -17,21 +17,13 @@ # shortcuts of the "delete" command never stop working. -set testfile del -set srcfile ${testfile}.c -set binfile ${objdir}/${subdir}/${testfile} -if { [gdb_compile "${srcdir}/${subdir}/${srcfile}" "${binfile}" executable {debug}] != "" } { - untested "Couldn't compile test program" +standard_testfile + +if {[prepare_for_testing $testfile.exp $testfile $srcfile debug]} { + untested $testfile.exp return -1 } -# Get things started. - -gdb_exit -gdb_start -gdb_reinitialize_dir $srcdir/$subdir -gdb_load ${binfile} - # A function to test that ALIAS is working as a shortcut of the "delete" # command. diff --git a/gdb/testsuite/gdb.base/detach.exp b/gdb/testsuite/gdb.base/detach.exp index 3d2e90c..0a61d11 100644 --- a/gdb/testsuite/gdb.base/detach.exp +++ b/gdb/testsuite/gdb.base/detach.exp @@ -27,10 +27,8 @@ if [is_remote target] then { return 0 } -set testfile "attach" -set srcfile ${testfile}.c -set binfile ${objdir}/${subdir}/${testfile} -set escapedbinfile [string_to_regexp ${objdir}/${subdir}/${testfile}] +standard_testfile attach.c +set escapedbinfile [string_to_regexp ${binfile}] if { [gdb_compile "${srcdir}/${subdir}/${srcfile}" "${binfile}" executable {debug}] != "" } { untested detach.exp diff --git a/gdb/testsuite/gdb.base/dfp-test.exp b/gdb/testsuite/gdb.base/dfp-test.exp index f121808..ce402df 100644 --- a/gdb/testsuite/gdb.base/dfp-test.exp +++ b/gdb/testsuite/gdb.base/dfp-test.exp @@ -18,9 +18,7 @@ # This file is part of the gdb testsuite. It is intended to test that # gdb could correctly handle decimal floating point introduced in IEEE 754R. -set testfile "dfp-test" -set srcfile ${testfile}.c -set binfile ${objdir}/${subdir}/${testfile} +standard_testfile .c # Try to compile the test case. If we can't, assume the # toolchain does not yet provide DFP support and bail out. @@ -29,10 +27,7 @@ if { [gdb_compile "${srcdir}/${subdir}/${srcfile}" "${binfile}" executable {quie return -1 } -gdb_exit -gdb_start -gdb_reinitialize_dir $srcdir/$subdir -gdb_load ${binfile} +clean_restart ${binfile} if ![runto_main] then { perror "couldn't run to breakpoint" diff --git a/gdb/testsuite/gdb.base/display.exp b/gdb/testsuite/gdb.base/display.exp index fa44003..5db84cc 100644 --- a/gdb/testsuite/gdb.base/display.exp +++ b/gdb/testsuite/gdb.base/display.exp @@ -16,13 +16,10 @@ # display.exp Test display commands # Also do some printing stuff for coverage's sake. # -set testfile display -set srcfile ${testfile}.c -set binfile ${objdir}/${subdir}/${testfile} +standard_testfile - - -if { [gdb_compile "${srcdir}/${subdir}/${srcfile}" "${binfile}" executable {debug nowarnings}] != "" } { +if {[prepare_for_testing $testfile.exp $testfile $srcfile \ + {debug nowarnings}]} { untested display.exp return -1 } @@ -36,11 +33,6 @@ verbose "Timeout is now $timeout seconds" 2 # use this to debug: #log_user 1 -gdb_exit -gdb_start -gdb_reinitialize_dir $srcdir/$subdir -gdb_load ${binfile} - # Some coverage stuff # if !$use_gdb_stub { diff --git a/gdb/testsuite/gdb.base/dmsym.exp b/gdb/testsuite/gdb.base/dmsym.exp index 02b1a9c..822eed7 100644 --- a/gdb/testsuite/gdb.base/dmsym.exp +++ b/gdb/testsuite/gdb.base/dmsym.exp @@ -21,16 +21,18 @@ set testfile dmsym_main # This is why we use gdb_compile instead of relying on the usual # call to prepare_for_testing. +set dmsym_o [standard_output_file dmsym.o] + if {[gdb_compile "${srcdir}/${subdir}/dmsym.c" \ - ${objdir}/${subdir}/dmsym.o \ + $dmsym_o \ object {}] != ""} { untested dmsym.exp return -1 } if {[gdb_compile \ - [list ${srcdir}/${subdir}/dmsym_main.c ${objdir}/${subdir}/dmsym.o] \ - ${objdir}/${subdir}/${testfile} \ + [list ${srcdir}/${subdir}/dmsym_main.c $dmsym_o] \ + [standard_output_file ${testfile}] \ executable {debug}] != ""} { untested dmsym.exp return -1 diff --git a/gdb/testsuite/gdb.base/dump.exp b/gdb/testsuite/gdb.base/dump.exp index b2d0b3a..ea93b89 100644 --- a/gdb/testsuite/gdb.base/dump.exp +++ b/gdb/testsuite/gdb.base/dump.exp @@ -17,10 +17,8 @@ # This is a test for the gdb command "dump". -set testfile "dump" +standard_testfile -set srcfile ${testfile}.c -set binfile ${objdir}/${subdir}/${testfile} set options {debug} set is64bitonly "no" diff --git a/gdb/testsuite/gdb.base/dup-sect.exp b/gdb/testsuite/gdb.base/dup-sect.exp index 6076801..fcc762e 100644 --- a/gdb/testsuite/gdb.base/dup-sect.exp +++ b/gdb/testsuite/gdb.base/dup-sect.exp @@ -33,11 +33,9 @@ if {![istarget *-*-linux*] return 0 } -set testfile dup-sect -set srcfile ${testfile}.S +standard_testfile .S set srcmainfile start.c set executable ${testfile} -set binfile ${objdir}/${subdir}/${executable} if {[build_executable ${testfile}.exp $executable [list ${srcfile} ${srcmainfile}] {}] == -1} { return -1 |