* Personal prototype "gx" translation-based JIT engine for M32R.

[ChangeLog]
start-sanitize-gxsim
1998-11-13  Frank Ch. Eigler  <fche@elastic.org>
	* configure.in: Added "--enable-sim-gx" option.
	* configure: Regenerated.
end-sanitize-gxsim
[common/ChangeLog]
1998-11-13  Frank Ch. Eigler  <fche@elastic.org>
start-sanitize-gxsim
	* Make-common.im: Build sim-gx.o and sim-gx-run.o.
	* sim-gx.c: New file: target-independent gx routines.
	* sim-gx.h: Declarations for gx structs and routines.
	* sim-gx-run.c: New file: target-independent gx driver.
	* sim-base.h: Add gx block vector to state struct.
end-sanitize-gxsim
	* aclocal.m4: Add tests for dlopen family.

23 files changed, 11603 insertions, 0 deletions

diff --git a/sim/.Sanitize b/sim/.Sanitize
index 763ee7c..6c39ef0 100644
--- a/sim/.Sanitize
+++ b/sim/.Sanitize
@@ -22,6 +22,13 @@ else
         lose_these_too="${tic80_files} ${lose_these_too}"
 fi
 
+gxsim_files="m32r-gx"
+if ( echo $* | grep keep\-gxsim > /dev/null ) ; then
+        keep_these_too="${gxsim_files} ${keep_these_too}"
+else
+        lose_these_too="${gxsim_files} ${lose_these_too}"
+fi
+
 lose_these_too="${lose_these_too}"
 
 # All files listed between the "Things-to-keep:" line and the
@@ -90,6 +97,34 @@ else
         done
 fi
 
+gxsim_files="configure configure.in ChangeLog"
+if ( echo $* | grep keep\-gxsim > /dev/null ) ; then
+        for i in $gxsim_files ; do
+                if test ! -d $i && (grep sanitize-gxsim $i > /dev/null) ; then
+                        if [ -n "${verbose}" ] ; then
+                                echo Keeping gxsim stuff in $i
+                        fi
+                fi
+        done
+else
+        for i in $gxsim_files ; do
+                if test ! -d $i && (grep sanitize-gxsim $i > /dev/null) ; then
+                        if [ -n "${verbose}" ] ; then
+                                echo Removing traces of \"gxsim\" from $i...
+                        fi
+                        cp $i new
+                        sed '/start\-sanitize\-gxsim/,/end-\sanitize\-gxsim/d' < $i > new
+                        if [ -n "${safe}" -a ! -f .Recover/$i ] ; then
+                                if [ -n "${verbose}" ] ; then
+                                        echo Caching $i in .Recover...
+                                fi
+                                mv $i .Recover
+                        fi
+                        mv new $i
+                fi
+        done
+fi
+
 v850_files="configure configure.in ChangeLog"
 if ( echo $* | grep keep\-v850e > /dev/null ) ; then
         for i in $v850_files ; do
diff --git a/sim/common/.Sanitize b/sim/common/.Sanitize
index b468d63..e6b50e3 100644
--- a/sim/common/.Sanitize
+++ b/sim/common/.Sanitize
@@ -22,6 +22,13 @@ else
         lose_these_too="${cygnus_files} ${lose_these_too}"
 fi
 
+gxsim_files="sim-gx-run.c sim-gx.c sim-gx.h"
+if ( echo $* | grep keep\-gxsim > /dev/null ) ; then
+        keep_these_too="${gxsim_files} ${keep_these_too}"
+else
+        lose_these_too="${gxsim_files} ${lose_these_too}"
+fi
+
 # All files listed between the "Things-to-keep:" line and the
 # "Files-to-sed:" line will be kept.  All other files will be removed.
 # Directories listed in this section will have their own Sanitize
@@ -179,4 +186,32 @@ else
         done
 fi
 
+gxsim_files="ChangeLog Make-common.in sim-base.h"
+if ( echo $* | grep keep\-gxsim > /dev/null ) ; then
+        for i in $gxsim_files ; do
+                if test ! -d $i && (grep sanitize-gxsim $i > /dev/null) ; then
+                        if [ -n "${verbose}" ] ; then
+                                echo Keeping gxsim stuff in $i
+                        fi
+                fi
+        done
+else
+        for i in $gxsim_files ; do
+                if test ! -d $i && (grep sanitize-gxsim $i > /dev/null) ; then
+                        if [ -n "${verbose}" ] ; then
+                                echo Removing traces of \"gxsim\" from $i...
+                        fi
+                        cp $i new
+                        sed '/start\-sanitize\-gxsim/,/end-\sanitize\-gxsim/d' < $i > new
+                        if [ -n "${safe}" -a ! -f .Recover/$i ] ; then
+                                if [ -n "${verbose}" ] ; then
+                                        echo Caching $i in .Recover...
+                                fi
+                                mv $i .Recover
+                        fi
+                        mv new $i
+                fi
+        done
+fi
+
 # End of file.
diff --git a/sim/common/ChangeLog b/sim/common/ChangeLog
index b7e6f2e..8a334a2 100644
--- a/sim/common/ChangeLog
+++ b/sim/common/ChangeLog
@@ -1,3 +1,15 @@
+1998-11-13  Frank Ch. Eigler  <fche@elastic.org>
+	
+start-sanitize-gxsim
+	* Make-common.im: Build sim-gx.o and sim-gx-run.o.
+	* sim-gx.c: New file: target-independent gx routines.
+	* sim-gx.h: Declarations for gx structs and routines.
+	* sim-gx-run.c: New file: target-independent gx driver.
+	* sim-base.h: Add gx block vector to state struct.
+end-sanitize-gxsim
+	* aclocal.m4: Add tests for dlopen family.
+	* config.in: Regenerated.
+	
 Wed Nov 11 14:02:25 1998  Doug Evans  <devans@canuck.cygnus.com>
 
 	* sim-hload.c (sim_load): Pass `prog_name' to sim_load_file, not NULL.
diff --git a/sim/common/Make-common.in b/sim/common/Make-common.in
index 809160b..3622bec 100644
--- a/sim/common/Make-common.in
+++ b/sim/common/Make-common.in
@@ -318,6 +318,9 @@ sim-n-core_h = $(srccom)/sim-n-core.h
 sim-engine_h = $(srccom)/sim-engine.h
 sim-events_h = $(srccom)/sim-events.h
 sim-fpu_h = $(srccom)/sim-fpu.h
+# start-sanitize-gxsim
+sim-gx_h = $(srccom)/sim-gx.h
+# end-sanitize-gxsim
 sim-io_h = $(srccom)/sim-io.h
 sim-options_h = $(srccom)/sim-options.h
 sim-break_h = $(srccom)/sim-break.h
@@ -383,6 +386,18 @@ sim-fpu.o: $(srccom)/sim-fpu.c $(sim-fpu_h) \
 	  $(SIM_EXTRA_DEPS)
 	$(CC) -c $(srccom)/sim-fpu.c $(ALL_CFLAGS)
 
+# start-sanitize-gxsim
+sim-gx.o: $(srccom)/sim-gx.c $(sim_main_headers) \
+	  $(sim-gx_h) \
+	  $(SIM_EXTRA_DEPS)
+	$(CC) -c $(srccom)/sim-gx.c $(ALL_CFLAGS)
+
+sim-gx-run.o: $(srccom)/sim-gx-run.c $(sim_main_headers) \
+	  $(sim-gx_h) \
+	  $(SIM_EXTRA_DEPS)
+	$(CC) -c $(srccom)/sim-gx-run.c $(ALL_CFLAGS)
+# end-sanitize-gxsim
+
 sim-hload.o: $(srccom)/sim-hload.c $(sim-assert_h) \
 	  $(srcroot)/include/remote-sim.h \
 	  $(SIM_EXTRA_DEPS)
diff --git a/sim/common/sim-gx-run.c b/sim/common/sim-gx-run.c
new file mode 100644
index 0000000..a4d8865
--- /dev/null
+++ b/sim/common/sim-gx-run.c
@@ -0,0 +1,148 @@
+/* GX generic simulator run.
+   Copyright (C) 1998 Cygnus Solutions.
+*/
+
+#include "sim-main.h"
+#include "sim-assert.h"
+#include "sim-gx.h"
+
+#ifdef HAVE_TIME_H
+#include <time.h>
+#endif
+
+
+/* GX implementation of sim_engine_run that works within the
+   sim_engine setjmp/longjmp framework. */
+
+
+void
+sim_engine_run (SIM_DESC sd,
+		int next_cpu_nr,
+		int nr_cpus, /* ignore */
+		int siggnal) /* ignore */
+{
+  sim_cpu* cpu;
+  int cont = 1;
+  int rc;
+
+  SIM_ASSERT (STATE_MAGIC (sd) == SIM_MAGIC_NUMBER);
+  cpu = STATE_CPU (sd, next_cpu_nr);
+
+  while(cont)
+    {
+      sim_gx_block* block;
+      sim_gx_compiled_block* compiled_block;
+      sim_gx_function f;
+      sim_cia cia = CIA_GET(cpu);
+      int optimized;
+      int pre_checksum, post_checksum;
+
+      /* find optimized gx block that includes this PC */
+      block = sim_gx_block_find(cia);
+      if(block == NULL)
+	{
+	  /* start new learning block */
+	  block = sim_gx_block_create(cia);
+	}
+      ASSERT(block != NULL);
+
+      /* pick preferred compiled block */
+      if(block->optimized_block != NULL)
+	{
+	  compiled_block = block->optimized_block;
+	  /* no stats */
+	}
+      else
+	{
+	  /* test for optimization policy */
+	  if(tgx_optimize_test(block))
+	    {
+	      block->opt_compile_count ++;
+	      sim_gx_block_translate(block, 1 /* optimized */);
+	      compiled_block = block->optimized_block;
+	      optimized = 1;
+	    }
+	  else
+	    {
+	      compiled_block = block->learning_block;
+	      optimized = 0;
+	    }
+	}      
+      ASSERT(compiled_block != NULL);
+      
+      /* load & resolve gx function */
+      f = sim_gx_compiled_block_f(compiled_block);
+
+      /* XXX: debug 
+      printf("calling into gx function %p, pc=%08lx, opt %d\n",
+	     (void*) f, (unsigned long) cpu->regs.h_pc, optimized);
+      */
+
+      /* compute pc_flags checksum */
+      if(! optimized)
+	{
+	  int i;
+	  pre_checksum = 0;
+	  for(i=0; i < block->length / block->divisor; i++)
+	    pre_checksum += block->pc_flags[i];
+	}
+
+      /* call into gx function */
+      rc = (*f)(& cpu->regs, block->pc_flags, block->callbacks);
+
+      /* compute pc_flags checksum */
+      if(! optimized)
+	{
+	  int i;
+	  post_checksum = 0;
+	  for(i=0; i < block->length / block->divisor; i++)
+	    post_checksum += block->pc_flags[i];
+
+	  if(post_checksum != pre_checksum) /* system changing */
+	    {
+	      block->learn_last_change = time(NULL);
+	    }
+	}
+
+      /* XXX: debug
+      printf("returned from gx function %p, rc=%d, pc=%08lx\n",
+	     (void*) f, rc, (unsigned long) cpu->regs.h_pc);
+      */
+
+      switch(rc)
+	{
+	case GX_F_YIELD: /* gx block voluntarily gave up control */
+	case GX_F_RANGE: /* PC travelled outside this block */
+	  ; /* continue block dispatch loop */
+	  break;
+	  
+	case GX_F_NONPC: /* non-instruction PC in this block */
+	  if(compiled_block == block->optimized_block)
+	    {
+	      /*	      sim_io_printf(sd, "NOTE: cancelling premature optimization, GX block %p, PC %08lx\n", 
+			      block, (long) cpu->regs.h_pc); */
+	      sim_gx_compiled_block_dispose(compiled_block);
+	      block->learn_last_change = time(NULL);
+	      block->optimized_block = NULL;
+	    }
+	  else
+	    {
+	      /* learning-mode gx block should not fail this way */
+	      sim_io_error(sd, "Internal error - GX block cia %08lx NONPC\n", (long) cia);
+	    }
+	  break;
+	  
+	case GX_F_HALT: /* gx function returning control */
+	  cont = 0; /* merely exit loop */
+	  break;
+
+	  /* should not happen */
+	default:
+	  sim_io_error(sd, "Translation error (bad rc 0x%d in gx block)", rc);
+	  /* NOTREACHED */
+	}
+      
+      if(sim_events_tick(sd))
+	sim_events_process(sd);
+    }
+}
diff --git a/sim/common/sim-gx.c b/sim/common/sim-gx.c
new file mode 100644
index 0000000..413739d
--- /dev/null
+++ b/sim/common/sim-gx.c
@@ -0,0 +1,807 @@
+/* GX target-independent functions for block translation.
+  Copyright (C) 1998 Cygnus Solutions.  */
+
+
+#include "sim-main.h"
+#include "sim-assert.h"
+#include "sim-gx.h"
+
+#include "config.h"
+#include "cconfig.h"
+
+/* shared object functions */
+#ifdef HAVE_DLFCN_H
+#include <dlfcn.h>
+#else
+#error "need dlfcn.h"
+#endif
+
+#ifdef HAVE_ERRNO_H
+#include <errno.h>
+#else
+#error "need errno.h"
+#endif
+
+#include <stdlib.h>
+#include <string.h>
+#include <limits.h>
+#ifdef HAVE_TIME_H
+#include <time.h>
+#endif
+#ifdef HAVE_UNISTD_H
+#include <unistd.h>
+#endif
+#ifdef HAVE_FCNTL_H
+#include <fcntl.h>
+#endif
+#ifdef HAVE_SYS_STAT_H
+#include <sys/stat.h>
+#endif
+
+#include "bfd.h"
+
+
+
+
+/* Load the object file with given gx block.  Return pointer to GX
+   function or NULL on failure. */
+
+sim_gx_function
+sim_gx_compiled_block_f(sim_gx_compiled_block* gx)
+{
+  sim_gx_function f = gx->function_dlhandle;
+  SIM_DESC sd = current_state;
+  int rc;
+
+  if(f == NULL)
+    {
+      /* compile object */
+      if(gx->object_name == NULL && gx->source_name != NULL)
+	{
+	  char compile_command[2000];
+
+	  gx->object_name = strdup(gx->source_name);
+	  /* turn *.c into *.o */
+	  gx->object_name[strlen(gx->object_name)]='o';
+
+	  /* compute command string to compile object */
+	  sprintf(compile_command,
+		  "make -f %s OBJ=%s SRC=%s gx",
+#define GX_MAKEFILE "--no-makefile-yet--"
+		  GX_MAKEFILE,
+		  gx->object_name,
+		  gx->source_name);
+
+	  rc = system(compile_command);
+	  if(rc != 0)
+	    {
+	      sim_io_error(sd, "Compile error rc %d for GX source %s: %s", 
+			rc,
+			gx->source_name,
+			strerror(errno));
+	    }
+	}
+      
+      /* load object */
+      if(gx->object_dlhandle == NULL && gx->object_name != NULL)
+	{
+	  gx->object_dlhandle = dlopen(gx->object_name, RTLD_NOW);
+	  if(gx->object_dlhandle == NULL)
+	    {
+	      sim_io_error(sd, "Load error for GX object %s: %s", 
+			gx->object_name,
+			dlerror());
+	    }
+	}
+      
+      /* locate function */
+      if(gx->function_dlhandle == NULL && gx->object_dlhandle != NULL && gx->symbol_name != NULL)
+	{
+	  f = gx->function_dlhandle = dlsym(gx->object_dlhandle, gx->symbol_name);
+	  if(f == NULL)
+	    {
+	      sim_io_error(sd, "Resolve error for GX object %s symbol %s: %s", 
+			gx->object_name,
+			gx->symbol_name,
+			dlerror());
+	    }
+	}
+    } /* f == NULL */
+
+  return f;
+}
+
+
+
+/* Forget about given GX block.  Remove its source/object; unload it
+   from memory. */
+void
+sim_gx_compiled_block_dispose(sim_gx_compiled_block* gx)
+{
+  SIM_DESC sd = current_state;
+  int rc;
+
+  /* forget dl information */
+  gx->function_dlhandle = NULL;
+
+  /* unload shared library */
+  if(gx->object_dlhandle != NULL)
+    {
+      rc = dlclose(gx->object_dlhandle);
+      if(rc != 0)
+	{
+	  sim_io_error(sd, "dlclose() error for GX object %s: %s", 
+		    gx->object_name,
+		    dlerror());
+	}
+      gx->object_dlhandle = NULL;
+    }
+
+  /* final gasps */
+  zfree(gx->source_name);
+  zfree(gx->object_name);
+  zfree(gx->symbol_name);
+  zfree(gx);
+}
+
+
+
+/* Translate a piece of the code segment around given PC, in given mode. */
+sim_gx_block*
+sim_gx_block_create(sim_cia cia)
+{
+  sim_gx_block* block;
+
+  /* allocate emtpy block */
+  block = zalloc(sizeof(sim_gx_block));
+
+  /* initialize block bounds, callback struct etc. */ 
+  tgx_block_ctor(block, cia);
+
+  /* create learning mode translation */ 
+  sim_gx_block_translate(block, 0 /* learning mode */);
+
+  /* add block to block list */
+  sim_gx_block_add(block);
+
+  return block;
+}
+
+
+
+/* Write the current block list to the state file */
+void
+sim_gx_write_block_list()
+{
+  int i;
+  SIM_DESC sd = current_state;
+  sim_gx_block_list* blocks = STATE_BLOCKS(sd);
+  FILE* f;
+  char state_file_name[PATH_MAX];
+  char *exec_name;
+
+  /* get base of executable name */
+  exec_name = bfd_get_filename(STATE_PROG_BFD(sd));
+  if(strrchr(exec_name, '/') != NULL)
+    exec_name = strrchr(exec_name, '/') + 1;
+
+  /* generate base name */
+  sprintf(state_file_name, "%s/%s.gx",
+	  GX_DIR,
+	  exec_name);
+
+  f = fopen(state_file_name, "w");
+  if(f == NULL)
+    {
+      sim_io_error(sd, "Error: cannot write to state file %s, errno %d", 
+		   state_file_name, errno);
+    }
+
+  fprintf(f, "# This file was automatically generated.  Do not edit.\n");
+
+  /* write block descriptors into state file */
+  for(i=0; i<blocks->gx_blocks_used; i++)
+    {
+      sim_gx_block* gx = blocks->gx_blocks[i];
+      sim_gx_compiled_block* block;
+      int j;
+      int age;
+
+      age = time(NULL) - gx->learn_last_change; /* store interval */
+      fprintf(f, "BLOCK 0x%lx 0x%lx %u %u\n", gx->origin, gx->length, gx->divisor, age);
+      fprintf(f, "FLAGS ");
+      for(j=0; j<GX_PC_FLAGS_INDEX(gx, gx->origin + gx->length); j++)
+	{
+	  fprintf(f, "%2x ", gx->pc_flags[j]);
+	}
+      fprintf(f, "\n");
+
+      /* write learning mode names */
+      block = gx->learning_block;
+      fprintf(f, "LEARNING %s %s %s %lu %u\n",
+	      block->source_name, block->object_name, block->symbol_name,
+	      gx->compile_time, gx->opt_compile_count);
+
+      /* write optimized mode names */
+      block = gx->optimized_block;
+      if(block)
+	fprintf(f, "OPTIMIZED %s %s %s\n",
+		block->source_name, block->object_name, block->symbol_name);
+
+      /* NB: other fields will be filled in with freshly guessed values */
+    }
+
+  (void) fclose(f);
+}
+
+
+
+void
+print_gx_blocks(sim_gx_block_list* blocks, char* where)
+{
+  printf("print_gx_blocks: %s\n", where);
+
+  if(blocks == NULL)
+    printf("(null)\n");
+  else
+    {
+      int i;
+      printf("size: %d, used: %d\n",
+	     blocks->gx_blocks_size, blocks->gx_blocks_used);
+
+      /* linear search */
+      for(i=0; i<blocks->gx_blocks_used; i++)
+	{
+	  sim_gx_block* gx = blocks->gx_blocks[i];
+	  printf("block %d: %p\n", i, (void*) gx);
+	  if(gx == NULL)
+	    printf("** NULL!\n");
+	  else
+	    printf("  begin 0x%08x length 0x%08x [opt %d%s]\n",
+		   (unsigned)gx->origin, (unsigned)gx->length,
+		   gx->opt_compile_count,
+		   (gx->optimized_block ? " loaded" : " discarded"));
+	}
+      
+    }
+}
+
+
+
+/* Read the current block list from the cache */
+void
+sim_gx_read_block_list()
+{
+  SIM_DESC sd = current_state;
+  FILE* f;
+  char state_file_name[PATH_MAX];
+  char *exec_name;
+
+  /* check for block */
+  if(STATE_PROG_BFD(sd) == NULL)
+    return;
+
+  /* get base of executable name */
+  exec_name = bfd_get_filename(STATE_PROG_BFD(sd));
+  if(strrchr(exec_name, '/') != NULL)
+    exec_name = strrchr(exec_name, '/') + 1;
+
+  /* generate base name */
+  sprintf(state_file_name, "%s/%s.gx",
+	  GX_DIR,
+	  exec_name);
+
+  f = fopen(state_file_name, "r");
+  if(f == NULL)
+    {
+      /* XXX: print warning */
+      return;
+    }
+
+  fscanf(f, "#%*[^\n]\n"); /* swallow # comment line */
+
+  while(1)
+    {
+      unsigned_4 origin, length;
+      unsigned divisor;
+      sim_gx_block* gx;
+      int rc;
+      sim_gx_compiled_block* block;
+      unsigned age;
+      int j;
+
+      rc = fscanf(f, "BLOCK 0x%0lx 0x%lx %u %u\n", & origin, & length, & divisor, & age);
+      if(rc != 4) /* not all fields matched - assume EOF */
+	break;
+
+      gx = zalloc(sizeof(sim_gx_block));
+
+      /* initialize block bounds, callback struct etc. */ 
+      tgx_block_ctor2(gx, origin, length, divisor);
+
+      /* read flags */
+      fscanf(f, "FLAGS");
+      for(j=0; j<GX_PC_FLAGS_INDEX(gx, gx->origin + gx->length); j++)
+	{
+	  unsigned value;
+	  fscanf(f, "%2x ", & value);
+	  gx->pc_flags[j] = (unsigned_1) value;
+	}
+      fscanf(f, "\n");
+
+      /* read learning mode info */
+      block = zalloc(sizeof(sim_gx_compiled_block));
+      gx->learning_block = block;
+      block->source_name = zalloc(PATH_MAX);
+      block->object_name = zalloc(PATH_MAX);
+      block->symbol_name = zalloc(PATH_MAX);
+      fscanf(f, "LEARNING %s %s %s %lu %u\n",
+	     block->source_name, block->object_name, block->symbol_name,
+	     & gx->compile_time, & gx->opt_compile_count);
+
+      /* read optimized mode info */
+      block = zalloc(sizeof(sim_gx_compiled_block));
+      gx->optimized_block = block;
+      block->source_name = zalloc(PATH_MAX);
+      block->object_name = zalloc(PATH_MAX);
+      block->symbol_name = zalloc(PATH_MAX);
+      rc = fscanf(f, "OPTIMIZED %s %s %s\n",
+		  block->source_name, block->object_name, block->symbol_name);
+      if(rc != 3)
+	{
+	  /* oops, not an optimized block */
+	  zfree(block->source_name);
+	  zfree(block->object_name);
+	  zfree(block->symbol_name);
+	  zfree(block);
+	  gx->optimized_block = NULL;
+	}
+
+      /* fill in remaining fields */
+      gx->learn_last_change = time(NULL) - age; /* make absolute */
+
+      /* store it away */
+      sim_gx_block_add(gx);
+    }
+
+  print_gx_blocks(STATE_BLOCKS(sd), "after restoring state");
+}
+
+
+
+
+
+
+/* Add a gx block to list */
+void
+sim_gx_block_add(sim_gx_block* block)
+{
+  SIM_DESC sd = current_state;
+  sim_gx_block_list* blocks = STATE_BLOCKS(sd);
+  int i;
+
+  /* print_gx_blocks(blocks, "pre add"); */
+
+  if(blocks == NULL)
+    blocks = STATE_BLOCKS(sd) = zalloc(sizeof(sim_gx_block_list));
+
+  /* need to enlarge block vector? */
+  if(blocks->gx_blocks_used == blocks->gx_blocks_size)
+    {
+      sim_gx_block** new_blocks;
+      int j;
+
+      blocks->gx_blocks_size += 20;
+      new_blocks = zalloc(blocks->gx_blocks_size * sizeof(sim_gx_block*));
+      for(j=0; j<blocks->gx_blocks_used; j++)
+	new_blocks[j] = blocks->gx_blocks[j];
+      if(blocks->gx_blocks) zfree(blocks->gx_blocks);
+      blocks->gx_blocks = new_blocks;
+    }
+
+  /* insert new block */
+  for(i=0; i<blocks->gx_blocks_used; i++)
+    {
+      ASSERT(blocks->gx_blocks[i] != NULL);
+
+      /* insertion point reached? */
+      if(blocks->gx_blocks[i]->origin > block->origin)
+	{
+	  int j;
+	  for(j=blocks->gx_blocks_used; j>=i; j--)
+	    blocks->gx_blocks[j] = blocks->gx_blocks[j-1];
+	  blocks->gx_blocks[i] = block;
+	  blocks->gx_blocks_used ++;
+	  break;
+	}
+    }
+
+  /* end of block vector */
+  if(i == blocks->gx_blocks_used)
+    {
+      blocks->gx_blocks[blocks->gx_blocks_used ++] = block;
+    }
+
+  /* print_gx_blocks(blocks, "post add"); */
+}
+
+
+
+/* Remove a gx block from list */
+void
+sim_gx_block_remove(sim_gx_block* block)
+{
+  SIM_DESC sd = current_state;
+  sim_gx_block_list* blocks = STATE_BLOCKS(sd);
+  int i;
+
+  /* print_gx_blocks(blocks, "pre remove"); */
+
+  /* linear search */
+  for(i=0; i<blocks->gx_blocks_used; i++)
+    {
+      if(blocks->gx_blocks[i] == block)
+	{
+	  /* found it */
+	  while(i < blocks->gx_blocks_used - 1)
+	    {
+	      blocks->gx_blocks[i] = blocks->gx_blocks[i+1];
+	      i++;
+	    }
+	  blocks->gx_blocks_used --;
+	  break;
+	}
+    }
+
+  /* print_gx_blocks(blocks, "post remove"); */
+}
+
+
+/* Find a gx block from list */
+sim_gx_block*
+sim_gx_block_find(sim_cia cia)
+{
+  SIM_DESC sd = current_state;
+  sim_gx_block_list* blocks = STATE_BLOCKS(sd);
+  int i;
+
+  if(blocks == NULL) return NULL;
+
+  /* print_gx_blocks(blocks, "pre find"); */
+
+  /* linear search */
+  for(i=0; i<blocks->gx_blocks_used; i++)
+    {
+      sim_gx_block* gx = blocks->gx_blocks[i];
+      ASSERT(gx != NULL);
+
+      if(GX_PC_INCLUDES(gx,cia))
+	{
+	  return gx;
+	}
+    }
+
+  return NULL;
+}
+
+
+
+/* generate */
+void
+sim_gx_block_translate(sim_gx_block* gx, int optimized)
+{
+  char pwd_name[PATH_MAX];
+  char dir_name[PATH_MAX];
+  char base_name[PATH_MAX];
+  char compile_command[PATH_MAX*4];
+  char* exec_name;
+  SIM_DESC sd = current_state;
+  int rc;
+  sim_cia gx_cia;
+  sim_gx_compiled_block* block = zalloc(sizeof(sim_gx_compiled_block));
+  unsigned time_begin, time_end;
+
+  time_begin = time(NULL);
+
+  if(optimized) gx->optimized_block = block;
+  else gx->learning_block = block;
+
+  /* get base of executable name */
+  exec_name = bfd_get_filename(STATE_PROG_BFD(sd));
+  if(strrchr(exec_name, '/') != NULL)
+    exec_name = strrchr(exec_name, '/') + 1;
+
+  /* generate base name */
+  sprintf(dir_name, "%s/%s",
+	  GX_DIR,
+	  exec_name);
+
+  /* generate base name */
+  getcwd(pwd_name, sizeof(pwd_name));
+  
+  /* create work directory */
+  rc = mkdir(GX_DIR, 0777);
+  if(rc != 0 &&
+     errno != EEXIST)
+    {
+      sim_io_error(sd, "Error: cannot create directory %s, errno %d", 
+		   GX_DIR, errno);
+    }
+
+  rc = mkdir(dir_name, 0777);
+  if(rc != 0 &&
+     errno != EEXIST)
+    {
+      sim_io_error(sd, "Error: cannot create directory %s, errno %d",
+		   dir_name, errno);
+    }
+
+  /* compute base name */
+  if(optimized)
+    sprintf(base_name, "%08lx_opt%d", gx->origin, gx->opt_compile_count);
+  else
+    sprintf(base_name, "%08lx", gx->origin);
+
+  /* generate source/object file names */ 
+  block->source_name = zalloc(PATH_MAX);
+  block->object_name = zalloc(PATH_MAX);
+  sprintf(block->source_name, "%s/%s.c", dir_name, base_name);
+
+  /* generate symbol name for gx function */
+  block->symbol_name = zalloc(PATH_MAX);
+  sprintf(block->symbol_name, "gx_%s", base_name);
+
+  /* open source file */
+  block->source_file = fopen(block->source_name, "w");
+  if(block->source_file == NULL)
+    {
+      sim_io_error(sd, "Error: cannot open file %s, errno %d",
+		   block->source_name, errno);
+    }
+
+  /* front matter */
+  fprintf(block->source_file, "/* sim-gx version %d */\n", GX_VERSION);
+  fprintf(block->source_file, "/* gx block date stamp %lu */\n\n", time(NULL));
+
+  /* emit head end of source */
+  tgx_emit_pre_function(gx, optimized); 
+
+  /* emit function header */
+  fprintf(block->source_file, "\n\n");
+  fprintf(block->source_file, "extern int\n");
+  fprintf(block->source_file, "%s", block->symbol_name);
+  fprintf(block->source_file, "(struct tgx_cpu_regs* regs, char* pc_flags, struct tgx_callbacks* callbacks)\n");
+  fprintf(block->source_file, "{\n");
+  fprintf(block->source_file, "  int rc = 0;\n");
+  if(! optimized)
+    fprintf(block->source_file, "  unsigned int insn_count = 0;\n");
+
+  /* pre-block gunk: register load */
+  tgx_emit_load_block(gx, optimized);
+
+  /* emit intra-block jump label */
+  fprintf(block->source_file, "\n");
+  fprintf(block->source_file, "shortjump:\n");
+  fprintf(block->source_file, "  pc = npc;\n");
+
+  /* translate jumptarget table */
+  if(! optimized)
+    {
+      fprintf(block->source_file, "  pc_flags[(pc - 0x%08x) / %u] |= %d;\n",
+	      (unsigned)gx->origin, gx->divisor, GX_PCF_JUMPTARGET);
+    }
+
+  /* enforce learning mode run limit */
+  if(! optimized)
+    {
+      fprintf(block->source_file, "  insn_count++;\n");
+      fprintf(block->source_file, "  if (insn_count > %d)\n", GX_LEARN_RUN_LIMIT);
+      fprintf(block->source_file, "    {\n");
+      fprintf(block->source_file, "      rc = %d;\n", GX_F_YIELD);
+      fprintf(block->source_file, "      npc = pc;\n");
+      fprintf(block->source_file, "      goto save;\n");
+      fprintf(block->source_file, "    }\n");
+    }
+
+  /* emit PC switch, use compressed case numbers */
+  fprintf(block->source_file, "\n");
+  fprintf(block->source_file, "  switch((pc - 0x%08x) / %u)\n",
+	  (unsigned)gx->origin, gx->divisor); 
+  fprintf(block->source_file, "    {\n"); 
+
+  /* handle bad-PC event */
+  fprintf(block->source_file, "    /* handle unknown jump target */\n");
+  fprintf(block->source_file, "    default:\n");
+  fprintf(block->source_file, "      rc = %d;\n", GX_F_NONPC);
+  fprintf(block->source_file, "      npc = pc;\n");
+  fprintf(block->source_file, "      goto save;\n");
+  
+  /* start translating at the origin */
+  gx_cia = gx->origin;
+
+  /* translate instructions in block */ 
+  while(GX_PC_INCLUDES(gx,gx_cia))
+    { 
+      sim_cia next_gx_cia;
+
+      /* translate PC case statement */
+      fprintf(block->source_file, "\n");
+      fprintf(block->source_file, "    /* PC: 0x%08x, flags %02x */\n",
+	      gx_cia, (int) GX_PC_FLAGS(gx, gx_cia));
+
+
+      /* skip over this instruction if it is not executed */
+      if(optimized && !(GX_PC_FLAGS(gx, gx_cia) & GX_PCF_INSTRUCTION))
+	{
+	  fprintf(block->source_file, "    /* (not reached) */\n");
+
+	  /* prevent fall-through from previous translated insn */
+	  if(gx_cia > gx->origin &&
+	     GX_PC_FLAGS(gx, (gx_cia - gx->divisor)) & GX_PCF_INSTRUCTION)
+	    {
+	      fprintf(block->source_file, "    /* prevent fall-through */\n");
+	      fprintf(block->source_file, "    npc = 0x%08x;\n", gx_cia);  
+	      fprintf(block->source_file, "    rc = %d;\n", GX_F_NONPC);  
+	      fprintf(block->source_file, "    goto save;\n");
+	    }
+
+	  next_gx_cia = gx_cia + gx->divisor;
+	  goto skip_instruction;
+	}
+
+      /* translate PC case statement */
+      if((! optimized) ||
+	 (GX_PC_FLAGS(gx, gx_cia) & GX_PCF_JUMPTARGET))
+	{
+	  fprintf(block->source_file, "    case %ld:\n",
+		  ((gx_cia - gx->origin) / gx->divisor));
+	}
+
+      /* translate breakpoint check & exit */
+      if(GX_PC_FLAGS(gx, gx_cia) & GX_PCF_COND_HALT)
+	{
+	  fprintf(block->source_file, "      if(pc_flags[%ld] & %d)\n",
+		  GX_PC_FLAGS_INDEX(gx, gx_cia),
+		  GX_PCF_HALT);
+	  fprintf(block->source_file, "        {\n");
+	  fprintf(block->source_file, "          rc = %d;\n", GX_F_HALT);
+	  fprintf(block->source_file, "          npc = pc;\n");
+	  fprintf(block->source_file, "          goto save;\n");
+	  fprintf(block->source_file, "        }\n");
+	}
+
+      /* [don't] emit PC-setting */
+      /* fprintf(block->source_file, "      pc = 0x%08x;\n", gx_cia); */
+
+      /* mark traversed instructions */
+      if(! optimized)
+	{
+	  fprintf(block->source_file, "      pc_flags[%ld] |= %d;\n",
+		  GX_PC_FLAGS_INDEX(gx, gx_cia),
+		  GX_PCF_INSTRUCTION);
+	}
+      
+      
+      /* translate instruction semantics */
+      next_gx_cia = tgx_emit_insn(gx, gx_cia, optimized);
+
+    skip_instruction:
+
+      /* go to next instruction */
+      gx_cia = next_gx_cia;
+    } 
+  fprintf(block->source_file, "    }\n"); 
+
+  /* dropped through last instruction in switch block */
+  fprintf(block->source_file, "\n");
+  fprintf(block->source_file, "  /* dropped through PC switch */\n");
+  fprintf(block->source_file, "  npc = 0x%08x;\n", gx_cia);
+  fprintf(block->source_file, "  rc = %d;\n", GX_F_RANGE);
+  fprintf(block->source_file, "  goto save;\n");
+
+  /* unknown length jump */
+  fprintf(block->source_file, "\n");
+  fprintf(block->source_file, "unknownjump:\n");
+  fprintf(block->source_file, "  if(npc >= 0x%08lx && npc < 0x%08lx)\n",
+	  gx->origin, gx->origin + gx->length);
+  fprintf(block->source_file, "    goto shortjump;\n");
+
+  /* long jump */
+  fprintf(block->source_file, "\n");
+  fprintf(block->source_file, "longjump:\n");
+  fprintf(block->source_file, "  rc = %d;\n", GX_F_RANGE);
+
+  /* post-block gunk: SAVE etc. */
+  fprintf(block->source_file, "\n");
+  fprintf(block->source_file, "save:\n");
+
+  tgx_emit_save_block(gx, optimized); 
+
+  /* emit tail end of function */ 
+  fprintf(block->source_file, "\n");
+  fprintf(block->source_file, "  return rc;\n");
+  fprintf(block->source_file, "}\n"); 
+
+  /* emit tail end of source */
+  tgx_emit_post_function(gx, optimized); 
+
+  /* close source file */ 
+  fclose(block->source_file);
+  block->source_file = NULL;
+
+  /* compile source & produce shared object */
+
+  sprintf(compile_command, 
+	  "gxtool --silent --mode=compile gcc -c -g %s %s",
+	  (optimized ? "-O3" : "-O"), block->source_name);
+
+  rc = system(compile_command);
+  if(rc != 0)
+    {
+      sim_io_error(sd, "Error during compiling: `%s' rc %d",
+		   compile_command, rc);
+    }
+
+  /* link source */
+
+  sprintf(compile_command,
+	  "gxtool --silent --mode=link gcc -export-dynamic -rpath %s -g -o lib%s.la %s.lo",
+	  dir_name, base_name, base_name);
+
+  rc = system(compile_command);
+  if(rc != 0)
+    {
+      sim_io_error(sd, "Error during linking: `%s' rc %d",
+		   compile_command, rc);
+    }
+
+
+  /* install */
+
+  sprintf(compile_command,
+	  "gxtool --silent --mode=install cp lib%s.la %s/%s >/dev/null 2>/dev/null",
+	  base_name, pwd_name, dir_name);
+
+  rc = system(compile_command);
+  if(rc != 0)
+    {
+      sim_io_error(sd, "Error during install: `%s' rc %d",
+		   compile_command, rc);
+    }
+
+
+  /* finish */
+
+  sprintf(compile_command,
+	  "gxtool --silent --mode=finish %s >/dev/null 2>/dev/null",
+	  dir_name);
+
+  rc = system(compile_command);
+  if(rc != 0)
+    {
+      sim_io_error(sd, "Error during finish: `%s' rc %d",
+		   compile_command, rc);
+    }
+
+  /* clean up */
+
+  sprintf(compile_command, "rm -f lib%s.la %s.lo", base_name, base_name);
+  rc = system(compile_command);
+  if(rc != 0)
+    {
+      sim_io_error(sd, "Error during cleanup: `%s' rc %d",
+		   compile_command, rc);
+    }
+
+  /* XXX: FILL IN  block->object_name from .la file */
+  sprintf(block->object_name, "%s/%s/lib%s.so.0",
+	  pwd_name, dir_name, base_name);
+
+  /* measure compile time */
+  time_end = time(NULL);
+
+  if(time_end == time_begin) time_end ++; /* clamp minimum duration to 1 */
+  gx->compile_time += time_end - time_begin;
+  /* fprintf(stderr, "*** compile time: %d\n", gx->compile_time); */
+} 
+
diff --git a/sim/common/sim-gx.h b/sim/common/sim-gx.h
new file mode 100644
index 0000000..b0d0673
--- /dev/null
+++ b/sim/common/sim-gx.h
@@ -0,0 +1,142 @@
+/* GX generic simulator structs.
+   Copyright (C) 1998 Cygnus Solutions.
+*/
+
+#ifndef SIM_GX_H
+#define SIM_GX_H
+
+#include <stdio.h>
+#include "sim-base.h"
+#include "sim-core.h"
+
+
+/*
+#ifndef SIM_GX
+#error "Compile this file only if configured SIM_GX"
+#endif
+*/
+
+
+/* configuration */
+
+#define GX_DIR ".gx"
+#define GX_VERSION 1
+
+
+struct sim_gx_compiled_block;
+
+
+/* record for a particular GX block */
+typedef struct sim_gx_block
+{
+  /* ---- BLOCK EXTENT ---- */
+  address_word origin; /* first code-segment address translated */
+  unsigned_4 length;   /* length of translated code-segment */
+
+#define GX_PC_INCLUDES(gx,pc) ((gx)->origin <= (pc) && (pc) < (gx)->origin + (gx)->length)
+
+  short divisor;       /* minimum instruction word size; address_word -> index divisor */
+  char* pc_flags;      /* see GX_PC_* below */
+
+#define GX_PCF_INSTRUCTION  0x01 /* learned */
+#define GX_PCF_JUMPTARGET   0x02 /* learned */
+#define GX_PCF_COND_HALT    0x10 /* translate-time input */
+#define GX_PCF_HALT         0x20 /* run-time input */
+#define GX_PC_FLAGS_INDEX(gx,pc) ((((pc) - ((gx)->origin)) / (gx)->divisor))
+#define GX_PC_FLAGS(gx,pc)       ((gx)->pc_flags[GX_PC_FLAGS_INDEX((gx),(pc))])
+
+  /* GX callbacks */
+  struct tgx_callbacks* callbacks;
+
+  /* compilation statistics */
+  unsigned_4 compile_time; /* time to compile [s] */
+
+  /* ---- LEARNING MODE STATE ---- */
+  unsigned_4 learn_last_change; /* time of last flag change */
+  struct sim_gx_compiled_block* learning_block;
+
+  /* ---- OPTIMIZED MODE STATE ---- */
+  unsigned opt_compile_count; /* number of optimized compile attempts */
+  struct sim_gx_compiled_block* optimized_block;
+} sim_gx_block;
+
+
+
+
+typedef struct sim_gx_compiled_block
+{
+  /* ---- TRANSLATION OBJECTS ---- */
+  char* source_name;   /* source file for translated object */
+  char* object_name;   /* file name of translated object */
+  char* symbol_name;   /* symbol name of function */
+  /* (all above pointers are zalloc()'d buffers, to be zfree()'d. */
+
+  FILE* source_file;   /* working file pointer during translation */
+  
+  /* ---- LOADED TRANSLATIONS ---- */
+  void* object_dlhandle; /* dlopen() handle to loaded object (if open) */
+  void* function_dlhandle; /* dlsym() pointer to function (if found) */
+} sim_gx_compiled_block;
+
+
+
+/* GX block vector: for quick search of translated blocks */
+typedef struct sim_gx_block_list
+{
+  /* ---- BLOCK VECTOR ---- */
+  sim_gx_block** gx_blocks; /* vector of GX blocks, sorted by origin field */
+  unsigned gx_blocks_size;  /* vector length */
+  unsigned gx_blocks_used;  /* number of elements used in vector */
+  address_word gx_first, gx_last; /* first & last addresses translated by any gx block */
+} sim_gx_block_list;
+
+
+/* actual gx function pointer type */
+struct tgx_cpu_regs;
+typedef int (*sim_gx_function)(struct tgx_cpu_regs* cpu, char* pc_flags, struct tgx_callbacks* callbacks);
+
+
+/* return values from gx function */
+#define GX_F_HALT 0
+#define GX_F_NONPC 1
+#define GX_F_RANGE 2
+#define GX_F_YIELD 3
+
+
+/* Limit on loop cycles within a learning mode gx block */
+#define GX_LEARN_RUN_LIMIT 10000
+
+/* Operations */
+sim_gx_block* sim_gx_block_create(sim_cia cia);
+
+sim_gx_block* sim_gx_block_find(sim_cia cia);
+void sim_gx_block_add(sim_gx_block* block);
+void sim_gx_block_remove(sim_gx_block* block);
+
+/* State save/restore */
+void sim_gx_write_block_list();
+void sim_gx_read_block_list();
+
+sim_gx_function sim_gx_compiled_block_f(sim_gx_compiled_block* gx);
+void sim_gx_compiled_block_dispose(sim_gx_compiled_block* gx);
+void sim_gx_block_translate(sim_gx_block* gx, int optimized);
+
+
+
+/* Target-specific translation operations */
+
+int tgx_optimize_test(sim_gx_block* block);
+
+void tgx_block_ctor(sim_gx_block* block, sim_cia cia);
+void tgx_block_ctor2(sim_gx_block* block, unsigned_4 origin,
+		     unsigned_4 length, unsigned_4 divisor);
+void tgx_block_dtor(sim_gx_block* block);
+
+void tgx_emit_pre_function(sim_gx_block* block, int optimized);
+void tgx_emit_load_block(sim_gx_block* block, int optimized);
+sim_cia tgx_emit_insn(sim_gx_block* block, sim_cia cia, int optimized);
+void tgx_emit_save_block(sim_gx_block* block, int optimized);
+void tgx_emit_post_function(sim_gx_block* block, int optimized);
+
+
+#endif /* SIM_GX_H */
diff --git a/sim/configure.in b/sim/configure.in
index 60e490d..e094487 100644
--- a/sim/configure.in
+++ b/sim/configure.in
@@ -136,6 +136,19 @@ case "${target}" in
 esac
 
 
+# start-sanitize-gxsim
+AC_ARG_ENABLE(sim-gx, [],
+[case "${enableval}" in
+  yes) 
+    if test -d ${srcdir}/${sim_target}-gx ; then
+       extra_subdirs="${sim_target}-gx"
+    else
+	AC_MSG_WARN(GX simulator not available for ${sim_target})
+    fi ;;
+esac])dnl
+# end-sanitize-gxsim
+
+
 # Is there a testsuite directory for the target?
 testdir=`echo ${target} | sed -e 's/-.*-/-/'`
 if test -r ${srcdir}/testsuite/${testdir}/configure ; then
diff --git a/sim/m32r-gx/.Sanitize b/sim/m32r-gx/.Sanitize
new file mode 100644
index 0000000..70e5bcb
--- /dev/null
+++ b/sim/m32r-gx/.Sanitize
@@ -0,0 +1,46 @@
+# Sanitize.in for sim/m32r
+# $Id$
+
+# Each directory to survive it's way into a release will need a file
+# like this one called "./.Sanitize".  All keyword lines must exist,
+# and must exist in the order specified by this file.  Each directory
+# in the tree will be processed, top down, in the following order.
+
+# Hash started lines like this one are comments and will be deleted
+# before anything else is done.  Blank lines will also be squashed
+# out.
+
+# The lines between the "Do-first:" line and the "Things-to-keep:"
+# line are executed as a /bin/sh shell script before anything else is
+# done in this 
+
+Do-first:
+
+# All files listed between the "Things-to-keep:" line and the
+# "Files-to-sed:" line will be kept.  All other files will be removed.
+# Directories listed in this section will have their own Sanitize
+# called.  Directories not listed will be removed in their entirety
+# with rm -rf.
+
+Things-to-keep:
+
+ChangeLog
+Makefile.in
+arch.h
+config.in
+configure
+configure.in
+cpuall.h
+gx-translate.c
+ltconfig
+ltmain.sh
+m32r-sim.h
+sim-if.c
+sim-main.h
+tconfig.in
+
+Things-to-lose:
+
+Do-last:
+
+# End of file.
diff --git a/sim/m32r-gx/ChangeLog b/sim/m32r-gx/ChangeLog
new file mode 100644
index 0000000..9905bf3
--- /dev/null
+++ b/sim/m32r-gx/ChangeLog
@@ -0,0 +1,3 @@
+1998-11-13  Frank Ch. Eigler  <fche@elastic.org>
+
+	* (*): New files: snapshot of gx simulator prototype.
diff --git a/sim/m32r-gx/Makefile.in b/sim/m32r-gx/Makefile.in
new file mode 100644
index 0000000..d3c651e
--- /dev/null
+++ b/sim/m32r-gx/Makefile.in
@@ -0,0 +1,104 @@
+# Makefile template for Configure for the m32r simulator
+# Copyright (C) 1996, 1997, 1998 Free Software Foundation, Inc.
+# Contributed by Cygnus Support.
+#
+# This file is part of GDB, the GNU debugger.
+#
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 2 of the License, or
+# (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License along
+# with this program; if not, write to the Free Software Foundation, Inc.,
+# 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+
+## COMMON_PRE_CONFIG_FRAG
+
+M32R_OBJS = gx-translate.o
+
+CONFIG_DEVICES = dv-sockser.o
+CONFIG_DEVICES =
+
+SIM_OBJS = \
+	sim-bits.o \
+	sim-break.o \
+	sim-config.o \
+	sim-core.o \
+	sim-endian.o \
+	sim-events.o \
+	sim-fpu.o \
+	sim-io.o \
+	sim-if.o \
+	sim-info.o \
+	sim-load.o \
+	sim-memopt.o \
+	sim-module.o \
+	sim-options.o \
+	sim-signal.o \
+	sim-trace.o \
+	sim-utils.o \
+	sim-watch.o \
+	sim-cpu.o \
+	sim-engine.o \
+	sim-core.o \
+	sim-hload.o \
+	sim-hrw.o \
+	sim-reason.o \
+	$(M32R_OBJS) \
+	sim-gx.o \
+	sim-gx-run.o \
+	$(CONFIG_DEVICES)
+
+# Extra headers included by sim-main.h.
+SIM_EXTRA_DEPS = \
+	arch.h cpuall.h m32r-sim.h cpu-opc.h
+
+SIM_EXTRA_CFLAGS = -DSIM_GX=1
+SIM_EXTRA_ALL = gxtool
+SIM_EXTRA_INSTALL = install-gxtool
+SIM_RUN_OBJS = nrun.o
+SIM_EXTRA_CLEAN = m32r-clean
+
+# This selects the m32r newlib/libgloss syscall definitions.
+NL_TARGET = -DNL_TARGET_m32r
+
+## COMMON_POST_CONFIG_FRAG
+
+arch = m32r
+
+MAIN_INCLUDE_DEPS = \
+	sim-main.h \
+	$(srcdir)/../common/sim-config.h \
+	$(srcdir)/../common/sim-base.h \
+	$(srcdir)/../common/sim-basics.h \
+	$(srcdir)/../common/sim-module.h \
+	$(srcdir)/../common/sim-trace.h \
+	tconfig.h
+INCLUDE_DEPS = $(MAIN_INCLUDE_DEPS) $(SIM_EXTRA_DEPS) cpu-sim.h
+OPS_INCLUDE_DEPS = \
+	$(srcdir)/../common/cgen-mem.h \
+	$(srcdir)/../common/cgen-ops.h
+
+sim-if.o: sim-if.c $(INCLUDE_DEPS) $(srcdir)/../common/sim-core.h
+
+arch.o: arch.c $(INCLUDE_DEPS)
+
+# M32R objs
+
+m32r.o: m32r.c $(INCLUDE_DEPS) $(OPS_INCLUDE_DEPS) cpu.h
+
+m32r-clean:
+	rm -f mloop.c stamp-arch stamp-cpu stamp-decode
+	rm -f tmp-*
+
+gxtool: ltconfig ltmain.sh
+	$(SHELL) $(srcdir)/ltconfig --disable-static -o $@ $(srcdir)/ltmain.sh
+
+install-gxtool: gxtool
+	$(INSTALL_PROGRAM) gxtool $(bindir)
diff --git a/sim/m32r-gx/arch.h b/sim/m32r-gx/arch.h
new file mode 100644
index 0000000..f43c0b3
--- /dev/null
+++ b/sim/m32r-gx/arch.h
@@ -0,0 +1,52 @@
+/* Simulator header for m32r.
+
+This file is machine generated with CGEN.
+
+Copyright (C) 1996, 1997, 1998 Free Software Foundation, Inc.
+
+This file is part of the GNU Simulators.
+
+This program is free software; you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation; either version 2, or (at your option)
+any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License along
+with this program; if not, write to the Free Software Foundation, Inc.,
+59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+
+*/
+
+#ifndef M32R_ARCH_H
+#define M32R_ARCH_H
+
+#include "m32r-opc.h"
+
+#define TARGET_BIG_ENDIAN 1
+
+/* Shorthand macro for fetching registers.  */
+#define CPU(x) (CPU_CGEN_HW (current_cpu)->x)
+
+typedef enum model_type {
+  MODEL_M32R_D, MODEL_TEST
+ , MODEL_MAX
+} MODEL_TYPE;
+
+#define MAX_MODELS ((int) MODEL_MAX)
+
+/* Enum declaration for unit types.  */
+typedef enum unit_type {
+  UNIT_NONE, UNIT_M32R_D_U_STORE, UNIT_M32R_D_U_LOAD, UNIT_M32R_D_U_EXEC
+ , UNIT_TEST_U_EXEC
+ , UNIT_MAX
+} UNIT_TYPE;
+
+#define MAX_UNITS (1)
+
+#endif /* M32R_ARCH_H */
+
diff --git a/sim/m32r-gx/config.in b/sim/m32r-gx/config.in
new file mode 100644
index 0000000..f0f9414
--- /dev/null
+++ b/sim/m32r-gx/config.in
@@ -0,0 +1,180 @@
+/* config.in.  Generated automatically from configure.in by autoheader.  */
+
+/* Define if using alloca.c.  */
+#undef C_ALLOCA
+
+/* Define to empty if the keyword does not work.  */
+#undef const
+
+/* Define to one of _getb67, GETB67, getb67 for Cray-2 and Cray-YMP systems.
+   This function is required for alloca.c support on those systems.  */
+#undef CRAY_STACKSEG_END
+
+/* Define if you have alloca, as a function or macro.  */
+#undef HAVE_ALLOCA
+
+/* Define if you have <alloca.h> and it should be used (not on Ultrix).  */
+#undef HAVE_ALLOCA_H
+
+/* Define if you have a working `mmap' system call.  */
+#undef HAVE_MMAP
+
+/* Define as __inline if that's what the C compiler calls it.  */
+#undef inline
+
+/* Define to `long' if <sys/types.h> doesn't define.  */
+#undef off_t
+
+/* Define if you need to in order for stat and other things to work.  */
+#undef _POSIX_SOURCE
+
+/* Define as the return type of signal handlers (int or void).  */
+#undef RETSIGTYPE
+
+/* Define to `unsigned' if <sys/types.h> doesn't define.  */
+#undef size_t
+
+/* If using the C implementation of alloca, define if you know the
+   direction of stack growth for your system; otherwise it will be
+   automatically deduced at run-time.
+ STACK_DIRECTION > 0 => grows toward higher addresses
+ STACK_DIRECTION < 0 => grows toward lower addresses
+ STACK_DIRECTION = 0 => direction of growth unknown
+ */
+#undef STACK_DIRECTION
+
+/* Define if you have the ANSI C header files.  */
+#undef STDC_HEADERS
+
+/* Define if your processor stores words with the most significant
+   byte first (like Motorola and SPARC, unlike Intel and VAX).  */
+#undef WORDS_BIGENDIAN
+
+/* Define to 1 if NLS is requested.  */
+#undef ENABLE_NLS
+
+/* Define as 1 if you have gettext and don't want to use GNU gettext.  */
+#undef HAVE_GETTEXT
+
+/* Define as 1 if you have the stpcpy function.  */
+#undef HAVE_STPCPY
+
+/* Define if your locale.h file contains LC_MESSAGES.  */
+#undef HAVE_LC_MESSAGES
+
+/* Define if you have the __argz_count function.  */
+#undef HAVE___ARGZ_COUNT
+
+/* Define if you have the __argz_next function.  */
+#undef HAVE___ARGZ_NEXT
+
+/* Define if you have the __argz_stringify function.  */
+#undef HAVE___ARGZ_STRINGIFY
+
+/* Define if you have the __setfpucw function.  */
+#undef HAVE___SETFPUCW
+
+/* Define if you have the dcgettext function.  */
+#undef HAVE_DCGETTEXT
+
+/* Define if you have the getcwd function.  */
+#undef HAVE_GETCWD
+
+/* Define if you have the getpagesize function.  */
+#undef HAVE_GETPAGESIZE
+
+/* Define if you have the getrusage function.  */
+#undef HAVE_GETRUSAGE
+
+/* Define if you have the munmap function.  */
+#undef HAVE_MUNMAP
+
+/* Define if you have the putenv function.  */
+#undef HAVE_PUTENV
+
+/* Define if you have the setenv function.  */
+#undef HAVE_SETENV
+
+/* Define if you have the setlocale function.  */
+#undef HAVE_SETLOCALE
+
+/* Define if you have the sigaction function.  */
+#undef HAVE_SIGACTION
+
+/* Define if you have the stpcpy function.  */
+#undef HAVE_STPCPY
+
+/* Define if you have the strcasecmp function.  */
+#undef HAVE_STRCASECMP
+
+/* Define if you have the strchr function.  */
+#undef HAVE_STRCHR
+
+/* Define if you have the time function.  */
+#undef HAVE_TIME
+
+/* Define if you have the <argz.h> header file.  */
+#undef HAVE_ARGZ_H
+
+/* Define if you have the <dlfcn.h> header file.  */
+#undef HAVE_DLFCN_H
+
+/* Define if you have the <errno.h> header file.  */
+#undef HAVE_ERRNO_H
+
+/* Define if you have the <fcntl.h> header file.  */
+#undef HAVE_FCNTL_H
+
+/* Define if you have the <fpu_control.h> header file.  */
+#undef HAVE_FPU_CONTROL_H
+
+/* Define if you have the <limits.h> header file.  */
+#undef HAVE_LIMITS_H
+
+/* Define if you have the <locale.h> header file.  */
+#undef HAVE_LOCALE_H
+
+/* Define if you have the <malloc.h> header file.  */
+#undef HAVE_MALLOC_H
+
+/* Define if you have the <nl_types.h> header file.  */
+#undef HAVE_NL_TYPES_H
+
+/* Define if you have the <stdlib.h> header file.  */
+#undef HAVE_STDLIB_H
+
+/* Define if you have the <string.h> header file.  */
+#undef HAVE_STRING_H
+
+/* Define if you have the <strings.h> header file.  */
+#undef HAVE_STRINGS_H
+
+/* Define if you have the <sys/param.h> header file.  */
+#undef HAVE_SYS_PARAM_H
+
+/* Define if you have the <sys/resource.h> header file.  */
+#undef HAVE_SYS_RESOURCE_H
+
+/* Define if you have the <sys/stat.h> header file.  */
+#undef HAVE_SYS_STAT_H
+
+/* Define if you have the <sys/time.h> header file.  */
+#undef HAVE_SYS_TIME_H
+
+/* Define if you have the <time.h> header file.  */
+#undef HAVE_TIME_H
+
+/* Define if you have the <unistd.h> header file.  */
+#undef HAVE_UNISTD_H
+
+/* Define if you have the <values.h> header file.  */
+#undef HAVE_VALUES_H
+
+/* Define if you have the dl library (-ldl).  */
+#undef HAVE_LIBDL
+
+/* Define if you have the nsl library (-lnsl).  */
+#undef HAVE_LIBNSL
+
+/* Define if you have the socket library (-lsocket).  */
+#undef HAVE_LIBSOCKET
diff --git a/sim/m32r-gx/configure b/sim/m32r-gx/configure
new file mode 100755
index 0000000..1423a06
--- /dev/null
+++ b/sim/m32r-gx/configure
@@ -0,0 +1,4205 @@
+#! /bin/sh
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+sim_inline="-DDEFAULT_INLINE=0"
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+# This file is derived from `gettext.m4'.  The difference is that the
+# included macros assume Cygnus-style source and build trees.
+
+# Macro to add for using GNU gettext.
+# Ulrich Drepper <drepper@cygnus.com>, 1995.
+#
+# This file file be copied and used freely without restrictions.  It can
+# be used in projects which are not available under the GNU Public License
+# but which still want to provide support for the GNU gettext functionality.
+# Please note that the actual code is *not* freely available.
+
+# serial 3
+
+
+
+
+
+# Search path for a program which passes the given test.
+# Ulrich Drepper <drepper@cygnus.com>, 1996.
+#
+# This file file be copied and used freely without restrictions.  It can
+# be used in projects which are not available under the GNU Public License
+# but which still want to provide support for the GNU gettext functionality.
+# Please note that the actual code is *not* freely available.
+
+# serial 1
+
+
+
+# Check whether LC_MESSAGES is available in <locale.h>.
+# Ulrich Drepper <drepper@cygnus.com>, 1995.
+#
+# This file file be copied and used freely without restrictions.  It can
+# be used in projects which are not available under the GNU Public License
+# but which still want to provide support for the GNU gettext functionality.
+# Please note that the actual code is *not* freely available.
+
+# serial 1
+
+
+
+# Check to see if we're running under Cygwin32, without using
+# AC_CANONICAL_*.  If so, set output variable CYGWIN32 to "yes".
+# Otherwise set it to "no".
+
+
+
+# Check to see if we're running under Win32, without using
+# AC_CANONICAL_*.  If so, set output variable EXEEXT to ".exe".
+# Otherwise set it to "".
+
+
+
+
+# Guess values for system-dependent variables and create Makefiles.
+# Generated automatically using autoconf version 2.12.2 
+# Copyright (C) 1992, 93, 94, 95, 96 Free Software Foundation, Inc.
+#
+# This configure script is free software; the Free Software Foundation
+# gives unlimited permission to copy, distribute and modify it.
+
+# Defaults:
+ac_help=
+ac_default_prefix=/usr/local
+# Any additions from configure.in:
+ac_help="$ac_help
+  --disable-nls           do not use Native Language Support"
+ac_help="$ac_help
+  --with-included-gettext use the GNU gettext library included here"
+ac_help="$ac_help
+  --enable-maintainer-mode		Enable developer functionality."
+ac_help="$ac_help
+  --enable-sim-bswap			Use Host specific BSWAP instruction."
+ac_help="$ac_help
+  --enable-sim-cflags=opts		Extra CFLAGS for use in building simulator"
+ac_help="$ac_help
+  --enable-sim-debug=opts		Enable debugging flags"
+ac_help="$ac_help
+  --enable-sim-stdio			Specify whether to use stdio for console input/output."
+ac_help="$ac_help
+  --enable-sim-trace=opts		Enable tracing flags"
+ac_help="$ac_help
+  --enable-sim-profile=opts		Enable profiling flags"
+ac_help="$ac_help
+  --enable-sim-endian=endian		Specify target byte endian orientation."
+ac_help="$ac_help
+  --enable-sim-alignment=align		Specify strict,  nonstrict or forced alignment of memory accesses."
+ac_help="$ac_help
+  --enable-sim-hostendian=end		Specify host byte endian orientation."
+ac_help="$ac_help
+  --enable-sim-default-model=model	Specify default model to simulate."
+ac_help="$ac_help
+  --enable-sim-environment=environment	Specify mixed, user, virtual or operating environment."
+
+# Initialize some variables set by options.
+# The variables have the same names as the options, with
+# dashes changed to underlines.
+build=NONE
+cache_file=./config.cache
+exec_prefix=NONE
+host=NONE
+no_create=
+nonopt=NONE
+no_recursion=
+prefix=NONE
+program_prefix=NONE
+program_suffix=NONE
+program_transform_name=s,x,x,
+silent=
+site=
+srcdir=
+target=NONE
+verbose=
+x_includes=NONE
+x_libraries=NONE
+bindir='${exec_prefix}/bin'
+sbindir='${exec_prefix}/sbin'
+libexecdir='${exec_prefix}/libexec'
+datadir='${prefix}/share'
+sysconfdir='${prefix}/etc'
+sharedstatedir='${prefix}/com'
+localstatedir='${prefix}/var'
+libdir='${exec_prefix}/lib'
+includedir='${prefix}/include'
+oldincludedir='/usr/include'
+infodir='${prefix}/info'
+mandir='${prefix}/man'
+
+# Initialize some other variables.
+subdirs=
+MFLAGS= MAKEFLAGS=
+SHELL=${CONFIG_SHELL-/bin/sh}
+# Maximum number of lines to put in a shell here document.
+ac_max_here_lines=12
+
+ac_prev=
+for ac_option
+do
+
+  # If the previous option needs an argument, assign it.
+  if test -n "$ac_prev"; then
+    eval "$ac_prev=\$ac_option"
+    ac_prev=
+    continue
+  fi
+
+  case "$ac_option" in
+  -*=*) ac_optarg=`echo "$ac_option" | sed 's/[-_a-zA-Z0-9]*=//'` ;;
+  *) ac_optarg= ;;
+  esac
+
+  # Accept the important Cygnus configure options, so we can diagnose typos.
+
+  case "$ac_option" in
+
+  -bindir | --bindir | --bindi | --bind | --bin | --bi)
+    ac_prev=bindir ;;
+  -bindir=* | --bindir=* | --bindi=* | --bind=* | --bin=* | --bi=*)
+    bindir="$ac_optarg" ;;
+
+  -build | --build | --buil | --bui | --bu)
+    ac_prev=build ;;
+  -build=* | --build=* | --buil=* | --bui=* | --bu=*)
+    build="$ac_optarg" ;;
+
+  -cache-file | --cache-file | --cache-fil | --cache-fi \
+  | --cache-f | --cache- | --cache | --cach | --cac | --ca | --c)
+    ac_prev=cache_file ;;
+  -cache-file=* | --cache-file=* | --cache-fil=* | --cache-fi=* \
+  | --cache-f=* | --cache-=* | --cache=* | --cach=* | --cac=* | --ca=* | --c=*)
+    cache_file="$ac_optarg" ;;
+
+  -datadir | --datadir | --datadi | --datad | --data | --dat | --da)
+    ac_prev=datadir ;;
+  -datadir=* | --datadir=* | --datadi=* | --datad=* | --data=* | --dat=* \
+  | --da=*)
+    datadir="$ac_optarg" ;;
+
+  -disable-* | --disable-*)
+    ac_feature=`echo $ac_option|sed -e 's/-*disable-//'`
+    # Reject names that are not valid shell variable names.
+    if test -n "`echo $ac_feature| sed 's/[-a-zA-Z0-9_]//g'`"; then
+      { echo "configure: error: $ac_feature: invalid feature name" 1>&2; exit 1; }
+    fi
+    ac_feature=`echo $ac_feature| sed 's/-/_/g'`
+    eval "enable_${ac_feature}=no" ;;
+
+  -enable-* | --enable-*)
+    ac_feature=`echo $ac_option|sed -e 's/-*enable-//' -e 's/=.*//'`
+    # Reject names that are not valid shell variable names.
+    if test -n "`echo $ac_feature| sed 's/[-_a-zA-Z0-9]//g'`"; then
+      { echo "configure: error: $ac_feature: invalid feature name" 1>&2; exit 1; }
+    fi
+    ac_feature=`echo $ac_feature| sed 's/-/_/g'`
+    case "$ac_option" in
+      *=*) ;;
+      *) ac_optarg=yes ;;
+    esac
+    eval "enable_${ac_feature}='$ac_optarg'" ;;
+
+  -exec-prefix | --exec_prefix | --exec-prefix | --exec-prefi \
+  | --exec-pref | --exec-pre | --exec-pr | --exec-p | --exec- \
+  | --exec | --exe | --ex)
+    ac_prev=exec_prefix ;;
+  -exec-prefix=* | --exec_prefix=* | --exec-prefix=* | --exec-prefi=* \
+  | --exec-pref=* | --exec-pre=* | --exec-pr=* | --exec-p=* | --exec-=* \
+  | --exec=* | --exe=* | --ex=*)
+    exec_prefix="$ac_optarg" ;;
+
+  -gas | --gas | --ga | --g)
+    # Obsolete; use --with-gas.
+    with_gas=yes ;;
+
+  -help | --help | --hel | --he)
+    # Omit some internal or obsolete options to make the list less imposing.
+    # This message is too long to be a string in the A/UX 3.1 sh.
+    cat << EOF
+Usage: configure [options] [host]
+Options: [defaults in brackets after descriptions]
+Configuration:
+  --cache-file=FILE       cache test results in FILE
+  --help                  print this message
+  --no-create             do not create output files
+  --quiet, --silent       do not print \`checking...' messages
+  --version               print the version of autoconf that created configure
+Directory and file names:
+  --prefix=PREFIX         install architecture-independent files in PREFIX
+                          [$ac_default_prefix]
+  --exec-prefix=EPREFIX   install architecture-dependent files in EPREFIX
+                          [same as prefix]
+  --bindir=DIR            user executables in DIR [EPREFIX/bin]
+  --sbindir=DIR           system admin executables in DIR [EPREFIX/sbin]
+  --libexecdir=DIR        program executables in DIR [EPREFIX/libexec]
+  --datadir=DIR           read-only architecture-independent data in DIR
+                          [PREFIX/share]
+  --sysconfdir=DIR        read-only single-machine data in DIR [PREFIX/etc]
+  --sharedstatedir=DIR    modifiable architecture-independent data in DIR
+                          [PREFIX/com]
+  --localstatedir=DIR     modifiable single-machine data in DIR [PREFIX/var]
+  --libdir=DIR            object code libraries in DIR [EPREFIX/lib]
+  --includedir=DIR        C header files in DIR [PREFIX/include]
+  --oldincludedir=DIR     C header files for non-gcc in DIR [/usr/include]
+  --infodir=DIR           info documentation in DIR [PREFIX/info]
+  --mandir=DIR            man documentation in DIR [PREFIX/man]
+  --srcdir=DIR            find the sources in DIR [configure dir or ..]
+  --program-prefix=PREFIX prepend PREFIX to installed program names
+  --program-suffix=SUFFIX append SUFFIX to installed program names
+  --program-transform-name=PROGRAM
+                          run sed PROGRAM on installed program names
+EOF
+    cat << EOF
+Host type:
+  --build=BUILD           configure for building on BUILD [BUILD=HOST]
+  --host=HOST             configure for HOST [guessed]
+  --target=TARGET         configure for TARGET [TARGET=HOST]
+Features and packages:
+  --disable-FEATURE       do not include FEATURE (same as --enable-FEATURE=no)
+  --enable-FEATURE[=ARG]  include FEATURE [ARG=yes]
+  --with-PACKAGE[=ARG]    use PACKAGE [ARG=yes]
+  --without-PACKAGE       do not use PACKAGE (same as --with-PACKAGE=no)
+  --x-includes=DIR        X include files are in DIR
+  --x-libraries=DIR       X library files are in DIR
+EOF
+    if test -n "$ac_help"; then
+      echo "--enable and --with options recognized:$ac_help"
+    fi
+    exit 0 ;;
+
+  -host | --host | --hos | --ho)
+    ac_prev=host ;;
+  -host=* | --host=* | --hos=* | --ho=*)
+    host="$ac_optarg" ;;
+
+  -includedir | --includedir | --includedi | --included | --include \
+  | --includ | --inclu | --incl | --inc)
+    ac_prev=includedir ;;
+  -includedir=* | --includedir=* | --includedi=* | --included=* | --include=* \
+  | --includ=* | --inclu=* | --incl=* | --inc=*)
+    includedir="$ac_optarg" ;;
+
+  -infodir | --infodir | --infodi | --infod | --info | --inf)
+    ac_prev=infodir ;;
+  -infodir=* | --infodir=* | --infodi=* | --infod=* | --info=* | --inf=*)
+    infodir="$ac_optarg" ;;
+
+  -libdir | --libdir | --libdi | --libd)
+    ac_prev=libdir ;;
+  -libdir=* | --libdir=* | --libdi=* | --libd=*)
+    libdir="$ac_optarg" ;;
+
+  -libexecdir | --libexecdir | --libexecdi | --libexecd | --libexec \
+  | --libexe | --libex | --libe)
+    ac_prev=libexecdir ;;
+  -libexecdir=* | --libexecdir=* | --libexecdi=* | --libexecd=* | --libexec=* \
+  | --libexe=* | --libex=* | --libe=*)
+    libexecdir="$ac_optarg" ;;
+
+  -localstatedir | --localstatedir | --localstatedi | --localstated \
+  | --localstate | --localstat | --localsta | --localst \
+  | --locals | --local | --loca | --loc | --lo)
+    ac_prev=localstatedir ;;
+  -localstatedir=* | --localstatedir=* | --localstatedi=* | --localstated=* \
+  | --localstate=* | --localstat=* | --localsta=* | --localst=* \
+  | --locals=* | --local=* | --loca=* | --loc=* | --lo=*)
+    localstatedir="$ac_optarg" ;;
+
+  -mandir | --mandir | --mandi | --mand | --man | --ma | --m)
+    ac_prev=mandir ;;
+  -mandir=* | --mandir=* | --mandi=* | --mand=* | --man=* | --ma=* | --m=*)
+    mandir="$ac_optarg" ;;
+
+  -nfp | --nfp | --nf)
+    # Obsolete; use --without-fp.
+    with_fp=no ;;
+
+  -no-create | --no-create | --no-creat | --no-crea | --no-cre \
+  | --no-cr | --no-c)
+    no_create=yes ;;
+
+  -no-recursion | --no-recursion | --no-recursio | --no-recursi \
+  | --no-recurs | --no-recur | --no-recu | --no-rec | --no-re | --no-r)
+    no_recursion=yes ;;
+
+  -oldincludedir | --oldincludedir | --oldincludedi | --oldincluded \
+  | --oldinclude | --oldinclud | --oldinclu | --oldincl | --oldinc \
+  | --oldin | --oldi | --old | --ol | --o)
+    ac_prev=oldincludedir ;;
+  -oldincludedir=* | --oldincludedir=* | --oldincludedi=* | --oldincluded=* \
+  | --oldinclude=* | --oldinclud=* | --oldinclu=* | --oldincl=* | --oldinc=* \
+  | --oldin=* | --oldi=* | --old=* | --ol=* | --o=*)
+    oldincludedir="$ac_optarg" ;;
+
+  -prefix | --prefix | --prefi | --pref | --pre | --pr | --p)
+    ac_prev=prefix ;;
+  -prefix=* | --prefix=* | --prefi=* | --pref=* | --pre=* | --pr=* | --p=*)
+    prefix="$ac_optarg" ;;
+
+  -program-prefix | --program-prefix | --program-prefi | --program-pref \
+  | --program-pre | --program-pr | --program-p)
+    ac_prev=program_prefix ;;
+  -program-prefix=* | --program-prefix=* | --program-prefi=* \
+  | --program-pref=* | --program-pre=* | --program-pr=* | --program-p=*)
+    program_prefix="$ac_optarg" ;;
+
+  -program-suffix | --program-suffix | --program-suffi | --program-suff \
+  | --program-suf | --program-su | --program-s)
+    ac_prev=program_suffix ;;
+  -program-suffix=* | --program-suffix=* | --program-suffi=* \
+  | --program-suff=* | --program-suf=* | --program-su=* | --program-s=*)
+    program_suffix="$ac_optarg" ;;
+
+  -program-transform-name | --program-transform-name \
+  | --program-transform-nam | --program-transform-na \
+  | --program-transform-n | --program-transform- \
+  | --program-transform | --program-transfor \
+  | --program-transfo | --program-transf \
+  | --program-trans | --program-tran \
+  | --progr-tra | --program-tr | --program-t)
+    ac_prev=program_transform_name ;;
+  -program-transform-name=* | --program-transform-name=* \
+  | --program-transform-nam=* | --program-transform-na=* \
+  | --program-transform-n=* | --program-transform-=* \
+  | --program-transform=* | --program-transfor=* \
+  | --program-transfo=* | --program-transf=* \
+  | --program-trans=* | --program-tran=* \
+  | --progr-tra=* | --program-tr=* | --program-t=*)
+    program_transform_name="$ac_optarg" ;;
+
+  -q | -quiet | --quiet | --quie | --qui | --qu | --q \
+  | -silent | --silent | --silen | --sile | --sil)
+    silent=yes ;;
+
+  -sbindir | --sbindir | --sbindi | --sbind | --sbin | --sbi | --sb)
+    ac_prev=sbindir ;;
+  -sbindir=* | --sbindir=* | --sbindi=* | --sbind=* | --sbin=* \
+  | --sbi=* | --sb=*)
+    sbindir="$ac_optarg" ;;
+
+  -sharedstatedir | --sharedstatedir | --sharedstatedi \
+  | --sharedstated | --sharedstate | --sharedstat | --sharedsta \
+  | --sharedst | --shareds | --shared | --share | --shar \
+  | --sha | --sh)
+    ac_prev=sharedstatedir ;;
+  -sharedstatedir=* | --sharedstatedir=* | --sharedstatedi=* \
+  | --sharedstated=* | --sharedstate=* | --sharedstat=* | --sharedsta=* \
+  | --sharedst=* | --shareds=* | --shared=* | --share=* | --shar=* \
+  | --sha=* | --sh=*)
+    sharedstatedir="$ac_optarg" ;;
+
+  -site | --site | --sit)
+    ac_prev=site ;;
+  -site=* | --site=* | --sit=*)
+    site="$ac_optarg" ;;
+
+  -srcdir | --srcdir | --srcdi | --srcd | --src | --sr)
+    ac_prev=srcdir ;;
+  -srcdir=* | --srcdir=* | --srcdi=* | --srcd=* | --src=* | --sr=*)
+    srcdir="$ac_optarg" ;;
+
+  -sysconfdir | --sysconfdir | --sysconfdi | --sysconfd | --sysconf \
+  | --syscon | --sysco | --sysc | --sys | --sy)
+    ac_prev=sysconfdir ;;
+  -sysconfdir=* | --sysconfdir=* | --sysconfdi=* | --sysconfd=* | --sysconf=* \
+  | --syscon=* | --sysco=* | --sysc=* | --sys=* | --sy=*)
+    sysconfdir="$ac_optarg" ;;
+
+  -target | --target | --targe | --targ | --tar | --ta | --t)
+    ac_prev=target ;;
+  -target=* | --target=* | --targe=* | --targ=* | --tar=* | --ta=* | --t=*)
+    target="$ac_optarg" ;;
+
+  -v | -verbose | --verbose | --verbos | --verbo | --verb)
+    verbose=yes ;;
+
+  -version | --version | --versio | --versi | --vers)
+    echo "configure generated by autoconf version 2.12.2"
+    exit 0 ;;
+
+  -with-* | --with-*)
+    ac_package=`echo $ac_option|sed -e 's/-*with-//' -e 's/=.*//'`
+    # Reject names that are not valid shell variable names.
+    if test -n "`echo $ac_package| sed 's/[-_a-zA-Z0-9]//g'`"; then
+      { echo "configure: error: $ac_package: invalid package name" 1>&2; exit 1; }
+    fi
+    ac_package=`echo $ac_package| sed 's/-/_/g'`
+    case "$ac_option" in
+      *=*) ;;
+      *) ac_optarg=yes ;;
+    esac
+    eval "with_${ac_package}='$ac_optarg'" ;;
+
+  -without-* | --without-*)
+    ac_package=`echo $ac_option|sed -e 's/-*without-//'`
+    # Reject names that are not valid shell variable names.
+    if test -n "`echo $ac_package| sed 's/[-a-zA-Z0-9_]//g'`"; then
+      { echo "configure: error: $ac_package: invalid package name" 1>&2; exit 1; }
+    fi
+    ac_package=`echo $ac_package| sed 's/-/_/g'`
+    eval "with_${ac_package}=no" ;;
+
+  --x)
+    # Obsolete; use --with-x.
+    with_x=yes ;;
+
+  -x-includes | --x-includes | --x-include | --x-includ | --x-inclu \
+  | --x-incl | --x-inc | --x-in | --x-i)
+    ac_prev=x_includes ;;
+  -x-includes=* | --x-includes=* | --x-include=* | --x-includ=* | --x-inclu=* \
+  | --x-incl=* | --x-inc=* | --x-in=* | --x-i=*)
+    x_includes="$ac_optarg" ;;
+
+  -x-libraries | --x-libraries | --x-librarie | --x-librari \
+  | --x-librar | --x-libra | --x-libr | --x-lib | --x-li | --x-l)
+    ac_prev=x_libraries ;;
+  -x-libraries=* | --x-libraries=* | --x-librarie=* | --x-librari=* \
+  | --x-librar=* | --x-libra=* | --x-libr=* | --x-lib=* | --x-li=* | --x-l=*)
+    x_libraries="$ac_optarg" ;;
+
+  -*) { echo "configure: error: $ac_option: invalid option; use --help to show usage" 1>&2; exit 1; }
+    ;;
+
+  *)
+    if test -n "`echo $ac_option| sed 's/[-a-z0-9.]//g'`"; then
+      echo "configure: warning: $ac_option: invalid host type" 1>&2
+    fi
+    if test "x$nonopt" != xNONE; then
+      { echo "configure: error: can only configure for one host and one target at a time" 1>&2; exit 1; }
+    fi
+    nonopt="$ac_option"
+    ;;
+
+  esac
+done
+
+if test -n "$ac_prev"; then
+  { echo "configure: error: missing argument to --`echo $ac_prev | sed 's/_/-/g'`" 1>&2; exit 1; }
+fi
+
+trap 'rm -fr conftest* confdefs* core core.* *.core $ac_clean_files; exit 1' 1 2 15
+
+# File descriptor usage:
+# 0 standard input
+# 1 file creation
+# 2 errors and warnings
+# 3 some systems may open it to /dev/tty
+# 4 used on the Kubota Titan
+# 6 checking for... messages and results
+# 5 compiler messages saved in config.log
+if test "$silent" = yes; then
+  exec 6>/dev/null
+else
+  exec 6>&1
+fi
+exec 5>./config.log
+
+echo "\
+This file contains any messages produced by compilers while
+running configure, to aid debugging if configure makes a mistake.
+" 1>&5
+
+# Strip out --no-create and --no-recursion so they do not pile up.
+# Also quote any args containing shell metacharacters.
+ac_configure_args=
+for ac_arg
+do
+  case "$ac_arg" in
+  -no-create | --no-create | --no-creat | --no-crea | --no-cre \
+  | --no-cr | --no-c) ;;
+  -no-recursion | --no-recursion | --no-recursio | --no-recursi \
+  | --no-recurs | --no-recur | --no-recu | --no-rec | --no-re | --no-r) ;;
+  *" "*|*"	"*|*[\[\]\~\#\$\^\&\*\(\)\{\}\\\|\;\<\>\?]*)
+  ac_configure_args="$ac_configure_args '$ac_arg'" ;;
+  *) ac_configure_args="$ac_configure_args $ac_arg" ;;
+  esac
+done
+
+# NLS nuisances.
+# Only set these to C if already set.  These must not be set unconditionally
+# because not all systems understand e.g. LANG=C (notably SCO).
+# Fixing LC_MESSAGES prevents Solaris sh from translating var values in `set'!
+# Non-C LC_CTYPE values break the ctype check.
+if test "${LANG+set}"   = set; then LANG=C;   export LANG;   fi
+if test "${LC_ALL+set}" = set; then LC_ALL=C; export LC_ALL; fi
+if test "${LC_MESSAGES+set}" = set; then LC_MESSAGES=C; export LC_MESSAGES; fi
+if test "${LC_CTYPE+set}"    = set; then LC_CTYPE=C;    export LC_CTYPE;    fi
+
+# confdefs.h avoids OS command line length limits that DEFS can exceed.
+rm -rf conftest* confdefs.h
+# AIX cpp loses on an empty file, so make sure it contains at least a newline.
+echo > confdefs.h
+
+# A filename unique to this package, relative to the directory that
+# configure is in, which we can look for to find out if srcdir is correct.
+ac_unique_file=Makefile.in
+
+# Find the source files, if location was not specified.
+if test -z "$srcdir"; then
+  ac_srcdir_defaulted=yes
+  # Try the directory containing this script, then its parent.
+  ac_prog=$0
+  ac_confdir=`echo $ac_prog|sed 's%/[^/][^/]*$%%'`
+  test "x$ac_confdir" = "x$ac_prog" && ac_confdir=.
+  srcdir=$ac_confdir
+  if test ! -r $srcdir/$ac_unique_file; then
+    srcdir=..
+  fi
+else
+  ac_srcdir_defaulted=no
+fi
+if test ! -r $srcdir/$ac_unique_file; then
+  if test "$ac_srcdir_defaulted" = yes; then
+    { echo "configure: error: can not find sources in $ac_confdir or .." 1>&2; exit 1; }
+  else
+    { echo "configure: error: can not find sources in $srcdir" 1>&2; exit 1; }
+  fi
+fi
+srcdir=`echo "${srcdir}" | sed 's%\([^/]\)/*$%\1%'`
+
+# Prefer explicitly selected file to automatically selected ones.
+if test -z "$CONFIG_SITE"; then
+  if test "x$prefix" != xNONE; then
+    CONFIG_SITE="$prefix/share/config.site $prefix/etc/config.site"
+  else
+    CONFIG_SITE="$ac_default_prefix/share/config.site $ac_default_prefix/etc/config.site"
+  fi
+fi
+for ac_site_file in $CONFIG_SITE; do
+  if test -r "$ac_site_file"; then
+    echo "loading site script $ac_site_file"
+    . "$ac_site_file"
+  fi
+done
+
+if test -r "$cache_file"; then
+  echo "loading cache $cache_file"
+  . $cache_file
+else
+  echo "creating cache $cache_file"
+  > $cache_file
+fi
+
+ac_ext=c
+# CFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options.
+ac_cpp='$CPP $CPPFLAGS'
+ac_compile='${CC-cc} -c $CFLAGS $CPPFLAGS conftest.$ac_ext 1>&5'
+ac_link='${CC-cc} -o conftest${ac_exeext} $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5'
+cross_compiling=$ac_cv_prog_cc_cross
+
+ac_exeext=
+ac_objext=o
+if (echo "testing\c"; echo 1,2,3) | grep c >/dev/null; then
+  # Stardent Vistra SVR4 grep lacks -e, says ghazi@caip.rutgers.edu.
+  if (echo -n testing; echo 1,2,3) | sed s/-n/xn/ | grep xn >/dev/null; then
+    ac_n= ac_c='
+' ac_t='	'
+  else
+    ac_n=-n ac_c= ac_t=
+  fi
+else
+  ac_n= ac_c='\c' ac_t=
+fi
+
+
+
+
+echo $ac_n "checking how to run the C preprocessor""... $ac_c" 1>&6
+echo "configure:688: checking how to run the C preprocessor" >&5
+# On Suns, sometimes $CPP names a directory.
+if test -n "$CPP" && test -d "$CPP"; then
+  CPP=
+fi
+if test -z "$CPP"; then
+if eval "test \"`echo '$''{'ac_cv_prog_CPP'+set}'`\" = set"; then
+  echo $ac_n "(cached) $ac_c" 1>&6
+else
+    # This must be in double quotes, not single quotes, because CPP may get
+  # substituted into the Makefile and "${CC-cc}" will confuse make.
+  CPP="${CC-cc} -E"
+  # On the NeXT, cc -E runs the code through the compiler's parser,
+  # not just through cpp.
+  cat > conftest.$ac_ext <<EOF
+#line 703 "configure"
+#include "confdefs.h"
+#include <assert.h>
+Syntax Error
+EOF
+ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
+{ (eval echo configure:709: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
+if test -z "$ac_err"; then
+  :
+else
+  echo "$ac_err" >&5
+  echo "configure: failed program was:" >&5
+  cat conftest.$ac_ext >&5
+  rm -rf conftest*
+  CPP="${CC-cc} -E -traditional-cpp"
+  cat > conftest.$ac_ext <<EOF
+#line 720 "configure"
+#include "confdefs.h"
+#include <assert.h>
+Syntax Error
+EOF
+ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
+{ (eval echo configure:726: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
+if test -z "$ac_err"; then
+  :
+else
+  echo "$ac_err" >&5
+  echo "configure: failed program was:" >&5
+  cat conftest.$ac_ext >&5
+  rm -rf conftest*
+  CPP="${CC-cc} -nologo -E"
+  cat > conftest.$ac_ext <<EOF
+#line 737 "configure"
+#include "confdefs.h"
+#include <assert.h>
+Syntax Error
+EOF
+ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
+{ (eval echo configure:743: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
+if test -z "$ac_err"; then
+  :
+else
+  echo "$ac_err" >&5
+  echo "configure: failed program was:" >&5
+  cat conftest.$ac_ext >&5
+  rm -rf conftest*
+  CPP=/lib/cpp
+fi
+rm -f conftest*
+fi
+rm -f conftest*
+fi
+rm -f conftest*
+  ac_cv_prog_CPP="$CPP"
+fi
+  CPP="$ac_cv_prog_CPP"
+else
+  ac_cv_prog_CPP="$CPP"
+fi
+echo "$ac_t""$CPP" 1>&6
+
+echo $ac_n "checking whether ${MAKE-make} sets \${MAKE}""... $ac_c" 1>&6
+echo "configure:768: checking whether ${MAKE-make} sets \${MAKE}" >&5
+set dummy ${MAKE-make}; ac_make=`echo "$2" | sed 'y%./+-%__p_%'`
+if eval "test \"`echo '$''{'ac_cv_prog_make_${ac_make}_set'+set}'`\" = set"; then
+  echo $ac_n "(cached) $ac_c" 1>&6
+else
+  cat > conftestmake <<\EOF
+all:
+	@echo 'ac_maketemp="${MAKE}"'
+EOF
+# GNU make sometimes prints "make[1]: Entering...", which would confuse us.
+eval `${MAKE-make} -f conftestmake 2>/dev/null | grep temp=`
+if test -n "$ac_maketemp"; then
+  eval ac_cv_prog_make_${ac_make}_set=yes
+else
+  eval ac_cv_prog_make_${ac_make}_set=no
+fi
+rm -f conftestmake
+fi
+if eval "test \"`echo '$ac_cv_prog_make_'${ac_make}_set`\" = yes"; then
+  echo "$ac_t""yes" 1>&6
+  SET_MAKE=
+else
+  echo "$ac_t""no" 1>&6
+  SET_MAKE="MAKE=${MAKE-make}"
+fi
+
+echo $ac_n "checking for POSIXized ISC""... $ac_c" 1>&6
+echo "configure:795: checking for POSIXized ISC" >&5
+if test -d /etc/conf/kconfig.d &&
+  grep _POSIX_VERSION /usr/include/sys/unistd.h >/dev/null 2>&1
+then
+  echo "$ac_t""yes" 1>&6
+  ISC=yes # If later tests want to check for ISC.
+  cat >> confdefs.h <<\EOF
+#define _POSIX_SOURCE 1
+EOF
+
+  if test "$GCC" = yes; then
+    CC="$CC -posix"
+  else
+    CC="$CC -Xp"
+  fi
+else
+  echo "$ac_t""no" 1>&6
+  ISC=
+fi
+
+echo $ac_n "checking for ANSI C header files""... $ac_c" 1>&6
+echo "configure:816: checking for ANSI C header files" >&5
+if eval "test \"`echo '$''{'ac_cv_header_stdc'+set}'`\" = set"; then
+  echo $ac_n "(cached) $ac_c" 1>&6
+else
+  cat > conftest.$ac_ext <<EOF
+#line 821 "configure"
+#include "confdefs.h"
+#include <stdlib.h>
+#include <stdarg.h>
+#include <string.h>
+#include <float.h>
+EOF
+ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
+{ (eval echo configure:829: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
+if test -z "$ac_err"; then
+  rm -rf conftest*
+  ac_cv_header_stdc=yes
+else
+  echo "$ac_err" >&5
+  echo "configure: failed program was:" >&5
+  cat conftest.$ac_ext >&5
+  rm -rf conftest*
+  ac_cv_header_stdc=no
+fi
+rm -f conftest*
+
+if test $ac_cv_header_stdc = yes; then
+  # SunOS 4.x string.h does not declare mem*, contrary to ANSI.
+cat > conftest.$ac_ext <<EOF
+#line 846 "configure"
+#include "confdefs.h"
+#include <string.h>
+EOF
+if (eval "$ac_cpp conftest.$ac_ext") 2>&5 |
+  egrep "memchr" >/dev/null 2>&1; then
+  :
+else
+  rm -rf conftest*
+  ac_cv_header_stdc=no
+fi
+rm -f conftest*
+
+fi
+
+if test $ac_cv_header_stdc = yes; then
+  # ISC 2.0.2 stdlib.h does not declare free, contrary to ANSI.
+cat > conftest.$ac_ext <<EOF
+#line 864 "configure"
+#include "confdefs.h"
+#include <stdlib.h>
+EOF
+if (eval "$ac_cpp conftest.$ac_ext") 2>&5 |
+  egrep "free" >/dev/null 2>&1; then
+  :
+else
+  rm -rf conftest*
+  ac_cv_header_stdc=no
+fi
+rm -f conftest*
+
+fi
+
+if test $ac_cv_header_stdc = yes; then
+  # /bin/cc in Irix-4.0.5 gets non-ANSI ctype macros unless using -ansi.
+if test "$cross_compiling" = yes; then
+  :
+else
+  cat > conftest.$ac_ext <<EOF
+#line 885 "configure"
+#include "confdefs.h"
+#include <ctype.h>
+#define ISLOWER(c) ('a' <= (c) && (c) <= 'z')
+#define TOUPPER(c) (ISLOWER(c) ? 'A' + ((c) - 'a') : (c))
+#define XOR(e, f) (((e) && !(f)) || (!(e) && (f)))
+int main () { int i; for (i = 0; i < 256; i++)
+if (XOR (islower (i), ISLOWER (i)) || toupper (i) != TOUPPER (i)) exit(2);
+exit (0); }
+
+EOF
+if { (eval echo configure:896: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
+then
+  :
+else
+  echo "configure: failed program was:" >&5
+  cat conftest.$ac_ext >&5
+  rm -fr conftest*
+  ac_cv_header_stdc=no
+fi
+rm -fr conftest*
+fi
+
+fi
+fi
+
+echo "$ac_t""$ac_cv_header_stdc" 1>&6
+if test $ac_cv_header_stdc = yes; then
+  cat >> confdefs.h <<\EOF
+#define STDC_HEADERS 1
+EOF
+
+fi
+
+echo $ac_n "checking for working const""... $ac_c" 1>&6
+echo "configure:920: checking for working const" >&5
+if eval "test \"`echo '$''{'ac_cv_c_const'+set}'`\" = set"; then
+  echo $ac_n "(cached) $ac_c" 1>&6
+else
+  cat > conftest.$ac_ext <<EOF
+#line 925 "configure"
+#include "confdefs.h"
+
+int main() {
+
+/* Ultrix mips cc rejects this.  */
+typedef int charset[2]; const charset x;
+/* SunOS 4.1.1 cc rejects this.  */
+char const *const *ccp;
+char **p;
+/* NEC SVR4.0.2 mips cc rejects this.  */
+struct point {int x, y;};
+static struct point const zero = {0,0};
+/* AIX XL C 1.02.0.0 rejects this.
+   It does not let you subtract one const X* pointer from another in an arm
+   of an if-expression whose if-part is not a constant expression */
+const char *g = "string";
+ccp = &g + (g ? g-g : 0);
+/* HPUX 7.0 cc rejects these. */
+++ccp;
+p = (char**) ccp;
+ccp = (char const *const *) p;
+{ /* SCO 3.2v4 cc rejects this.  */
+  char *t;
+  char const *s = 0 ? (char *) 0 : (char const *) 0;
+
+  *t++ = 0;
+}
+{ /* Someone thinks the Sun supposedly-ANSI compiler will reject this.  */
+  int x[] = {25, 17};
+  const int *foo = &x[0];
+  ++foo;
+}
+{ /* Sun SC1.0 ANSI compiler rejects this -- but not the above. */
+  typedef const int *iptr;
+  iptr p = 0;
+  ++p;
+}
+{ /* AIX XL C 1.02.0.0 rejects this saying
+     "k.c", line 2.27: 1506-025 (S) Operand must be a modifiable lvalue. */
+  struct s { int j; const int *ap[3]; };
+  struct s *b; b->j = 5;
+}
+{ /* ULTRIX-32 V3.1 (Rev 9) vcc rejects this */
+  const int foo = 10;
+}
+
+; return 0; }
+EOF
+if { (eval echo configure:974: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+  rm -rf conftest*
+  ac_cv_c_const=yes
+else
+  echo "configure: failed program was:" >&5
+  cat conftest.$ac_ext >&5
+  rm -rf conftest*
+  ac_cv_c_const=no
+fi
+rm -f conftest*
+fi
+
+echo "$ac_t""$ac_cv_c_const" 1>&6
+if test $ac_cv_c_const = no; then
+  cat >> confdefs.h <<\EOF
+#define const 
+EOF
+
+fi
+
+echo $ac_n "checking for inline""... $ac_c" 1>&6
+echo "configure:995: checking for inline" >&5
+if eval "test \"`echo '$''{'ac_cv_c_inline'+set}'`\" = set"; then
+  echo $ac_n "(cached) $ac_c" 1>&6
+else
+  ac_cv_c_inline=no
+for ac_kw in inline __inline__ __inline; do
+  cat > conftest.$ac_ext <<EOF
+#line 1002 "configure"
+#include "confdefs.h"
+
+int main() {
+} $ac_kw foo() {
+; return 0; }
+EOF
+if { (eval echo configure:1009: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+  rm -rf conftest*
+  ac_cv_c_inline=$ac_kw; break
+else
+  echo "configure: failed program was:" >&5
+  cat conftest.$ac_ext >&5
+fi
+rm -f conftest*
+done
+
+fi
+
+echo "$ac_t""$ac_cv_c_inline" 1>&6
+case "$ac_cv_c_inline" in
+  inline | yes) ;;
+  no) cat >> confdefs.h <<\EOF
+#define inline 
+EOF
+ ;;
+  *)  cat >> confdefs.h <<EOF
+#define inline $ac_cv_c_inline
+EOF
+ ;;
+esac
+
+echo $ac_n "checking for off_t""... $ac_c" 1>&6
+echo "configure:1035: checking for off_t" >&5
+if eval "test \"`echo '$''{'ac_cv_type_off_t'+set}'`\" = set"; then
+  echo $ac_n "(cached) $ac_c" 1>&6
+else
+  cat > conftest.$ac_ext <<EOF
+#line 1040 "configure"
+#include "confdefs.h"
+#include <sys/types.h>
+#if STDC_HEADERS
+#include <stdlib.h>
+#include <stddef.h>
+#endif
+EOF
+if (eval "$ac_cpp conftest.$ac_ext") 2>&5 |
+  egrep "off_t[^a-zA-Z_0-9]" >/dev/null 2>&1; then
+  rm -rf conftest*
+  ac_cv_type_off_t=yes
+else
+  rm -rf conftest*
+  ac_cv_type_off_t=no
+fi
+rm -f conftest*
+
+fi
+echo "$ac_t""$ac_cv_type_off_t" 1>&6
+if test $ac_cv_type_off_t = no; then
+  cat >> confdefs.h <<\EOF
+#define off_t long
+EOF
+
+fi
+
+echo $ac_n "checking for size_t""... $ac_c" 1>&6
+echo "configure:1068: checking for size_t" >&5
+if eval "test \"`echo '$''{'ac_cv_type_size_t'+set}'`\" = set"; then
+  echo $ac_n "(cached) $ac_c" 1>&6
+else
+  cat > conftest.$ac_ext <<EOF
+#line 1073 "configure"
+#include "confdefs.h"
+#include <sys/types.h>
+#if STDC_HEADERS
+#include <stdlib.h>
+#include <stddef.h>
+#endif
+EOF
+if (eval "$ac_cpp conftest.$ac_ext") 2>&5 |
+  egrep "size_t[^a-zA-Z_0-9]" >/dev/null 2>&1; then
+  rm -rf conftest*
+  ac_cv_type_size_t=yes
+else
+  rm -rf conftest*
+  ac_cv_type_size_t=no
+fi
+rm -f conftest*
+
+fi
+echo "$ac_t""$ac_cv_type_size_t" 1>&6
+if test $ac_cv_type_size_t = no; then
+  cat >> confdefs.h <<\EOF
+#define size_t unsigned
+EOF
+
+fi
+
+# The Ultrix 4.2 mips builtin alloca declared by alloca.h only works
+# for constant arguments.  Useless!
+echo $ac_n "checking for working alloca.h""... $ac_c" 1>&6
+echo "configure:1103: checking for working alloca.h" >&5
+if eval "test \"`echo '$''{'ac_cv_header_alloca_h'+set}'`\" = set"; then
+  echo $ac_n "(cached) $ac_c" 1>&6
+else
+  cat > conftest.$ac_ext <<EOF
+#line 1108 "configure"
+#include "confdefs.h"
+#include <alloca.h>
+int main() {
+char *p = alloca(2 * sizeof(int));
+; return 0; }
+EOF
+if { (eval echo configure:1115: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+  rm -rf conftest*
+  ac_cv_header_alloca_h=yes
+else
+  echo "configure: failed program was:" >&5
+  cat conftest.$ac_ext >&5
+  rm -rf conftest*
+  ac_cv_header_alloca_h=no
+fi
+rm -f conftest*
+fi
+
+echo "$ac_t""$ac_cv_header_alloca_h" 1>&6
+if test $ac_cv_header_alloca_h = yes; then
+  cat >> confdefs.h <<\EOF
+#define HAVE_ALLOCA_H 1
+EOF
+
+fi
+
+echo $ac_n "checking for alloca""... $ac_c" 1>&6
+echo "configure:1136: checking for alloca" >&5
+if eval "test \"`echo '$''{'ac_cv_func_alloca_works'+set}'`\" = set"; then
+  echo $ac_n "(cached) $ac_c" 1>&6
+else
+  cat > conftest.$ac_ext <<EOF
+#line 1141 "configure"
+#include "confdefs.h"
+
+#ifdef __GNUC__
+# define alloca __builtin_alloca
+#else
+# ifdef _MSC_VER
+#  include <malloc.h>
+#  define alloca _alloca
+# else
+#  if HAVE_ALLOCA_H
+#   include <alloca.h>
+#  else
+#   ifdef _AIX
+ #pragma alloca
+#   else
+#    ifndef alloca /* predefined by HP cc +Olibcalls */
+char *alloca ();
+#    endif
+#   endif
+#  endif
+# endif
+#endif
+
+int main() {
+char *p = (char *) alloca(1);
+; return 0; }
+EOF
+if { (eval echo configure:1169: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+  rm -rf conftest*
+  ac_cv_func_alloca_works=yes
+else
+  echo "configure: failed program was:" >&5
+  cat conftest.$ac_ext >&5
+  rm -rf conftest*
+  ac_cv_func_alloca_works=no
+fi
+rm -f conftest*
+fi
+
+echo "$ac_t""$ac_cv_func_alloca_works" 1>&6
+if test $ac_cv_func_alloca_works = yes; then
+  cat >> confdefs.h <<\EOF
+#define HAVE_ALLOCA 1
+EOF
+
+fi
+
+if test $ac_cv_func_alloca_works = no; then
+  # The SVR3 libPW and SVR4 libucb both contain incompatible functions
+  # that cause trouble.  Some versions do not even contain alloca or
+  # contain a buggy version.  If you still want to use their alloca,
+  # use ar to extract alloca.o from them instead of compiling alloca.c.
+  ALLOCA=alloca.${ac_objext}
+  cat >> confdefs.h <<\EOF
+#define C_ALLOCA 1
+EOF
+
+
+echo $ac_n "checking whether alloca needs Cray hooks""... $ac_c" 1>&6
+echo "configure:1201: checking whether alloca needs Cray hooks" >&5
+if eval "test \"`echo '$''{'ac_cv_os_cray'+set}'`\" = set"; then
+  echo $ac_n "(cached) $ac_c" 1>&6
+else
+  cat > conftest.$ac_ext <<EOF
+#line 1206 "configure"
+#include "confdefs.h"
+#if defined(CRAY) && ! defined(CRAY2)
+webecray
+#else
+wenotbecray
+#endif
+
+EOF
+if (eval "$ac_cpp conftest.$ac_ext") 2>&5 |
+  egrep "webecray" >/dev/null 2>&1; then
+  rm -rf conftest*
+  ac_cv_os_cray=yes
+else
+  rm -rf conftest*
+  ac_cv_os_cray=no
+fi
+rm -f conftest*
+
+fi
+
+echo "$ac_t""$ac_cv_os_cray" 1>&6
+if test $ac_cv_os_cray = yes; then
+for ac_func in _getb67 GETB67 getb67; do
+  echo $ac_n "checking for $ac_func""... $ac_c" 1>&6
+echo "configure:1231: checking for $ac_func" >&5
+if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then
+  echo $ac_n "(cached) $ac_c" 1>&6
+else
+  cat > conftest.$ac_ext <<EOF
+#line 1236 "configure"
+#include "confdefs.h"
+/* System header to define __stub macros and hopefully few prototypes,
+    which can conflict with char $ac_func(); below.  */
+#include <assert.h>
+/* Override any gcc2 internal prototype to avoid an error.  */
+/* We use char because int might match the return type of a gcc2
+    builtin and then its argument prototype would still apply.  */
+char $ac_func();
+
+int main() {
+
+/* The GNU C library defines this for functions which it implements
+    to always fail with ENOSYS.  Some functions are actually named
+    something starting with __ and the normal name is an alias.  */
+#if defined (__stub_$ac_func) || defined (__stub___$ac_func)
+choke me
+#else
+$ac_func();
+#endif
+
+; return 0; }
+EOF
+if { (eval echo configure:1259: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+  rm -rf conftest*
+  eval "ac_cv_func_$ac_func=yes"
+else
+  echo "configure: failed program was:" >&5
+  cat conftest.$ac_ext >&5
+  rm -rf conftest*
+  eval "ac_cv_func_$ac_func=no"
+fi
+rm -f conftest*
+fi
+
+if eval "test \"`echo '$ac_cv_func_'$ac_func`\" = yes"; then
+  echo "$ac_t""yes" 1>&6
+  cat >> confdefs.h <<EOF
+#define CRAY_STACKSEG_END $ac_func
+EOF
+
+  break
+else
+  echo "$ac_t""no" 1>&6
+fi
+
+done
+fi
+
+echo $ac_n "checking stack direction for C alloca""... $ac_c" 1>&6
+echo "configure:1286: checking stack direction for C alloca" >&5
+if eval "test \"`echo '$''{'ac_cv_c_stack_direction'+set}'`\" = set"; then
+  echo $ac_n "(cached) $ac_c" 1>&6
+else
+  if test "$cross_compiling" = yes; then
+  ac_cv_c_stack_direction=0
+else
+  cat > conftest.$ac_ext <<EOF
+#line 1294 "configure"
+#include "confdefs.h"
+find_stack_direction ()
+{
+  static char *addr = 0;
+  auto char dummy;
+  if (addr == 0)
+    {
+      addr = &dummy;
+      return find_stack_direction ();
+    }
+  else
+    return (&dummy > addr) ? 1 : -1;
+}
+main ()
+{
+  exit (find_stack_direction() < 0);
+}
+EOF
+if { (eval echo configure:1313: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
+then
+  ac_cv_c_stack_direction=1
+else
+  echo "configure: failed program was:" >&5
+  cat conftest.$ac_ext >&5
+  rm -fr conftest*
+  ac_cv_c_stack_direction=-1
+fi
+rm -fr conftest*
+fi
+
+fi
+
+echo "$ac_t""$ac_cv_c_stack_direction" 1>&6
+cat >> confdefs.h <<EOF
+#define STACK_DIRECTION $ac_cv_c_stack_direction
+EOF
+
+fi
+
+for ac_hdr in unistd.h
+do
+ac_safe=`echo "$ac_hdr" | sed 'y%./+-%__p_%'`
+echo $ac_n "checking for $ac_hdr""... $ac_c" 1>&6
+echo "configure:1338: checking for $ac_hdr" >&5
+if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then
+  echo $ac_n "(cached) $ac_c" 1>&6
+else
+  cat > conftest.$ac_ext <<EOF
+#line 1343 "configure"
+#include "confdefs.h"
+#include <$ac_hdr>
+EOF
+ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
+{ (eval echo configure:1348: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
+if test -z "$ac_err"; then
+  rm -rf conftest*
+  eval "ac_cv_header_$ac_safe=yes"
+else
+  echo "$ac_err" >&5
+  echo "configure: failed program was:" >&5
+  cat conftest.$ac_ext >&5
+  rm -rf conftest*
+  eval "ac_cv_header_$ac_safe=no"
+fi
+rm -f conftest*
+fi
+if eval "test \"`echo '$ac_cv_header_'$ac_safe`\" = yes"; then
+  echo "$ac_t""yes" 1>&6
+    ac_tr_hdr=HAVE_`echo $ac_hdr | sed 'y%abcdefghijklmnopqrstuvwxyz./-%ABCDEFGHIJKLMNOPQRSTUVWXYZ___%'`
+  cat >> confdefs.h <<EOF
+#define $ac_tr_hdr 1
+EOF
+ 
+else
+  echo "$ac_t""no" 1>&6
+fi
+done
+
+for ac_func in getpagesize
+do
+echo $ac_n "checking for $ac_func""... $ac_c" 1>&6
+echo "configure:1377: checking for $ac_func" >&5
+if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then
+  echo $ac_n "(cached) $ac_c" 1>&6
+else
+  cat > conftest.$ac_ext <<EOF
+#line 1382 "configure"
+#include "confdefs.h"
+/* System header to define __stub macros and hopefully few prototypes,
+    which can conflict with char $ac_func(); below.  */
+#include <assert.h>
+/* Override any gcc2 internal prototype to avoid an error.  */
+/* We use char because int might match the return type of a gcc2
+    builtin and then its argument prototype would still apply.  */
+char $ac_func();
+
+int main() {
+
+/* The GNU C library defines this for functions which it implements
+    to always fail with ENOSYS.  Some functions are actually named
+    something starting with __ and the normal name is an alias.  */
+#if defined (__stub_$ac_func) || defined (__stub___$ac_func)
+choke me
+#else
+$ac_func();
+#endif
+
+; return 0; }
+EOF
+if { (eval echo configure:1405: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+  rm -rf conftest*
+  eval "ac_cv_func_$ac_func=yes"
+else
+  echo "configure: failed program was:" >&5
+  cat conftest.$ac_ext >&5
+  rm -rf conftest*
+  eval "ac_cv_func_$ac_func=no"
+fi
+rm -f conftest*
+fi
+
+if eval "test \"`echo '$ac_cv_func_'$ac_func`\" = yes"; then
+  echo "$ac_t""yes" 1>&6
+    ac_tr_func=HAVE_`echo $ac_func | tr 'abcdefghijklmnopqrstuvwxyz' 'ABCDEFGHIJKLMNOPQRSTUVWXYZ'`
+  cat >> confdefs.h <<EOF
+#define $ac_tr_func 1
+EOF
+ 
+else
+  echo "$ac_t""no" 1>&6
+fi
+done
+
+echo $ac_n "checking for working mmap""... $ac_c" 1>&6
+echo "configure:1430: checking for working mmap" >&5
+if eval "test \"`echo '$''{'ac_cv_func_mmap_fixed_mapped'+set}'`\" = set"; then
+  echo $ac_n "(cached) $ac_c" 1>&6
+else
+  if test "$cross_compiling" = yes; then
+  ac_cv_func_mmap_fixed_mapped=no
+else
+  cat > conftest.$ac_ext <<EOF
+#line 1438 "configure"
+#include "confdefs.h"
+
+/* Thanks to Mike Haertel and Jim Avera for this test.
+   Here is a matrix of mmap possibilities:
+	mmap private not fixed
+	mmap private fixed at somewhere currently unmapped
+	mmap private fixed at somewhere already mapped
+	mmap shared not fixed
+	mmap shared fixed at somewhere currently unmapped
+	mmap shared fixed at somewhere already mapped
+   For private mappings, we should verify that changes cannot be read()
+   back from the file, nor mmap's back from the file at a different
+   address.  (There have been systems where private was not correctly
+   implemented like the infamous i386 svr4.0, and systems where the
+   VM page cache was not coherent with the filesystem buffer cache
+   like early versions of FreeBSD and possibly contemporary NetBSD.)
+   For shared mappings, we should conversely verify that changes get
+   propogated back to all the places they're supposed to be.
+
+   Grep wants private fixed already mapped.
+   The main things grep needs to know about mmap are:
+   * does it exist and is it safe to write into the mmap'd area
+   * how to use it (BSD variants)  */
+#include <sys/types.h>
+#include <fcntl.h>
+#include <sys/mman.h>
+
+/* This mess was copied from the GNU getpagesize.h.  */
+#ifndef HAVE_GETPAGESIZE
+# ifdef HAVE_UNISTD_H
+#  include <unistd.h>
+# endif
+
+/* Assume that all systems that can run configure have sys/param.h.  */
+# ifndef HAVE_SYS_PARAM_H
+#  define HAVE_SYS_PARAM_H 1
+# endif
+
+# ifdef _SC_PAGESIZE
+#  define getpagesize() sysconf(_SC_PAGESIZE)
+# else /* no _SC_PAGESIZE */
+#  ifdef HAVE_SYS_PARAM_H
+#   include <sys/param.h>
+#   ifdef EXEC_PAGESIZE
+#    define getpagesize() EXEC_PAGESIZE
+#   else /* no EXEC_PAGESIZE */
+#    ifdef NBPG
+#     define getpagesize() NBPG * CLSIZE
+#     ifndef CLSIZE
+#      define CLSIZE 1
+#     endif /* no CLSIZE */
+#    else /* no NBPG */
+#     ifdef NBPC
+#      define getpagesize() NBPC
+#     else /* no NBPC */
+#      ifdef PAGESIZE
+#       define getpagesize() PAGESIZE
+#      endif /* PAGESIZE */
+#     endif /* no NBPC */
+#    endif /* no NBPG */
+#   endif /* no EXEC_PAGESIZE */
+#  else /* no HAVE_SYS_PARAM_H */
+#   define getpagesize() 8192	/* punt totally */
+#  endif /* no HAVE_SYS_PARAM_H */
+# endif /* no _SC_PAGESIZE */
+
+#endif /* no HAVE_GETPAGESIZE */
+
+#ifdef __cplusplus
+extern "C" { void *malloc(unsigned); }
+#else
+char *malloc();
+#endif
+
+int
+main()
+{
+	char *data, *data2, *data3;
+	int i, pagesize;
+	int fd;
+
+	pagesize = getpagesize();
+
+	/*
+	 * First, make a file with some known garbage in it.
+	 */
+	data = malloc(pagesize);
+	if (!data)
+		exit(1);
+	for (i = 0; i < pagesize; ++i)
+		*(data + i) = rand();
+	umask(0);
+	fd = creat("conftestmmap", 0600);
+	if (fd < 0)
+		exit(1);
+	if (write(fd, data, pagesize) != pagesize)
+		exit(1);
+	close(fd);
+
+	/*
+	 * Next, try to mmap the file at a fixed address which
+	 * already has something else allocated at it.  If we can,
+	 * also make sure that we see the same garbage.
+	 */
+	fd = open("conftestmmap", O_RDWR);
+	if (fd < 0)
+		exit(1);
+	data2 = malloc(2 * pagesize);
+	if (!data2)
+		exit(1);
+	data2 += (pagesize - ((int) data2 & (pagesize - 1))) & (pagesize - 1);
+	if (data2 != mmap(data2, pagesize, PROT_READ | PROT_WRITE,
+	    MAP_PRIVATE | MAP_FIXED, fd, 0L))
+		exit(1);
+	for (i = 0; i < pagesize; ++i)
+		if (*(data + i) != *(data2 + i))
+			exit(1);
+
+	/*
+	 * Finally, make sure that changes to the mapped area
+	 * do not percolate back to the file as seen by read().
+	 * (This is a bug on some variants of i386 svr4.0.)
+	 */
+	for (i = 0; i < pagesize; ++i)
+		*(data2 + i) = *(data2 + i) + 1;
+	data3 = malloc(pagesize);
+	if (!data3)
+		exit(1);
+	if (read(fd, data3, pagesize) != pagesize)
+		exit(1);
+	for (i = 0; i < pagesize; ++i)
+		if (*(data + i) != *(data3 + i))
+			exit(1);
+	close(fd);
+	unlink("conftestmmap");
+	exit(0);
+}
+
+EOF
+if { (eval echo configure:1578: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
+then
+  ac_cv_func_mmap_fixed_mapped=yes
+else
+  echo "configure: failed program was:" >&5
+  cat conftest.$ac_ext >&5
+  rm -fr conftest*
+  ac_cv_func_mmap_fixed_mapped=no
+fi
+rm -fr conftest*
+fi
+
+fi
+
+echo "$ac_t""$ac_cv_func_mmap_fixed_mapped" 1>&6
+if test $ac_cv_func_mmap_fixed_mapped = yes; then
+  cat >> confdefs.h <<\EOF
+#define HAVE_MMAP 1
+EOF
+
+fi
+
+
+# autoconf.info says this should be called right after AC_INIT.
+
+
+ac_aux_dir=
+for ac_dir in `cd $srcdir;pwd`/../.. $srcdir/`cd $srcdir;pwd`/../..; do
+  if test -f $ac_dir/install-sh; then
+    ac_aux_dir=$ac_dir
+    ac_install_sh="$ac_aux_dir/install-sh -c"
+    break
+  elif test -f $ac_dir/install.sh; then
+    ac_aux_dir=$ac_dir
+    ac_install_sh="$ac_aux_dir/install.sh -c"
+    break
+  fi
+done
+if test -z "$ac_aux_dir"; then
+  { echo "configure: error: can not find install-sh or install.sh in `cd $srcdir;pwd`/../.. $srcdir/`cd $srcdir;pwd`/../.." 1>&2; exit 1; }
+fi
+ac_config_guess=$ac_aux_dir/config.guess
+ac_config_sub=$ac_aux_dir/config.sub
+ac_configure=$ac_aux_dir/configure # This should be Cygnus configure.
+
+
+# Do some error checking and defaulting for the host and target type.
+# The inputs are:
+#    configure --host=HOST --target=TARGET --build=BUILD NONOPT
+#
+# The rules are:
+# 1. You are not allowed to specify --host, --target, and nonopt at the
+#    same time.
+# 2. Host defaults to nonopt.
+# 3. If nonopt is not specified, then host defaults to the current host,
+#    as determined by config.guess.
+# 4. Target and build default to nonopt.
+# 5. If nonopt is not specified, then target and build default to host.
+
+# The aliases save the names the user supplied, while $host etc.
+# will get canonicalized.
+case $host---$target---$nonopt in
+NONE---*---* | *---NONE---* | *---*---NONE) ;;
+*) { echo "configure: error: can only configure for one host and one target at a time" 1>&2; exit 1; } ;;
+esac
+
+
+# Make sure we can run config.sub.
+if ${CONFIG_SHELL-/bin/sh} $ac_config_sub sun4 >/dev/null 2>&1; then :
+else { echo "configure: error: can not run $ac_config_sub" 1>&2; exit 1; }
+fi
+
+echo $ac_n "checking host system type""... $ac_c" 1>&6
+echo "configure:1651: checking host system type" >&5
+
+host_alias=$host
+case "$host_alias" in
+NONE)
+  case $nonopt in
+  NONE)
+    if host_alias=`${CONFIG_SHELL-/bin/sh} $ac_config_guess`; then :
+    else { echo "configure: error: can not guess host type; you must specify one" 1>&2; exit 1; }
+    fi ;;
+  *) host_alias=$nonopt ;;
+  esac ;;
+esac
+
+host=`${CONFIG_SHELL-/bin/sh} $ac_config_sub $host_alias`
+host_cpu=`echo $host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\1/'`
+host_vendor=`echo $host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\2/'`
+host_os=`echo $host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'`
+echo "$ac_t""$host" 1>&6
+
+echo $ac_n "checking target system type""... $ac_c" 1>&6
+echo "configure:1672: checking target system type" >&5
+
+target_alias=$target
+case "$target_alias" in
+NONE)
+  case $nonopt in
+  NONE) target_alias=$host_alias ;;
+  *) target_alias=$nonopt ;;
+  esac ;;
+esac
+
+target=`${CONFIG_SHELL-/bin/sh} $ac_config_sub $target_alias`
+target_cpu=`echo $target | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\1/'`
+target_vendor=`echo $target | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\2/'`
+target_os=`echo $target | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'`
+echo "$ac_t""$target" 1>&6
+
+echo $ac_n "checking build system type""... $ac_c" 1>&6
+echo "configure:1690: checking build system type" >&5
+
+build_alias=$build
+case "$build_alias" in
+NONE)
+  case $nonopt in
+  NONE) build_alias=$host_alias ;;
+  *) build_alias=$nonopt ;;
+  esac ;;
+esac
+
+build=`${CONFIG_SHELL-/bin/sh} $ac_config_sub $build_alias`
+build_cpu=`echo $build | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\1/'`
+build_vendor=`echo $build | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\2/'`
+build_os=`echo $build | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'`
+echo "$ac_t""$build" 1>&6
+
+test "$host_alias" != "$target_alias" &&
+  test "$program_prefix$program_suffix$program_transform_name" = \
+    NONENONEs,x,x, &&
+  program_prefix=${target_alias}-
+
+if test "$program_transform_name" = s,x,x,; then
+  program_transform_name=
+else
+  # Double any \ or $.  echo might interpret backslashes.
+  cat <<\EOF_SED > conftestsed
+s,\\,\\\\,g; s,\$,$$,g
+EOF_SED
+  program_transform_name="`echo $program_transform_name|sed -f conftestsed`"
+  rm -f conftestsed
+fi
+test "$program_prefix" != NONE &&
+  program_transform_name="s,^,${program_prefix},; $program_transform_name"
+# Use a double $ so make ignores it.
+test "$program_suffix" != NONE &&
+  program_transform_name="s,\$\$,${program_suffix},; $program_transform_name"
+
+# sed with no file args requires a program.
+test "$program_transform_name" = "" && program_transform_name="s,x,x,"
+
+# Extract the first word of "gcc", so it can be a program name with args.
+set dummy gcc; ac_word=$2
+echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
+echo "configure:1734: checking for $ac_word" >&5
+if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then
+  echo $ac_n "(cached) $ac_c" 1>&6
+else
+  if test -n "$CC"; then
+  ac_cv_prog_CC="$CC" # Let the user override the test.
+else
+  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=":"
+  for ac_dir in $PATH; do
+    test -z "$ac_dir" && ac_dir=.
+    if test -f $ac_dir/$ac_word; then
+      ac_cv_prog_CC="gcc"
+      break
+    fi
+  done
+  IFS="$ac_save_ifs"
+fi
+fi
+CC="$ac_cv_prog_CC"
+if test -n "$CC"; then
+  echo "$ac_t""$CC" 1>&6
+else
+  echo "$ac_t""no" 1>&6
+fi
+
+if test -z "$CC"; then
+  # Extract the first word of "cc", so it can be a program name with args.
+set dummy cc; ac_word=$2
+echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
+echo "configure:1763: checking for $ac_word" >&5
+if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then
+  echo $ac_n "(cached) $ac_c" 1>&6
+else
+  if test -n "$CC"; then
+  ac_cv_prog_CC="$CC" # Let the user override the test.
+else
+  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=":"
+  ac_prog_rejected=no
+  for ac_dir in $PATH; do
+    test -z "$ac_dir" && ac_dir=.
+    if test -f $ac_dir/$ac_word; then
+      if test "$ac_dir/$ac_word" = "/usr/ucb/cc"; then
+        ac_prog_rejected=yes
+	continue
+      fi
+      ac_cv_prog_CC="cc"
+      break
+    fi
+  done
+  IFS="$ac_save_ifs"
+if test $ac_prog_rejected = yes; then
+  # We found a bogon in the path, so make sure we never use it.
+  set dummy $ac_cv_prog_CC
+  shift
+  if test $# -gt 0; then
+    # We chose a different compiler from the bogus one.
+    # However, it has the same basename, so the bogon will be chosen
+    # first if we set CC to just the basename; use the full file name.
+    shift
+    set dummy "$ac_dir/$ac_word" "$@"
+    shift
+    ac_cv_prog_CC="$@"
+  fi
+fi
+fi
+fi
+CC="$ac_cv_prog_CC"
+if test -n "$CC"; then
+  echo "$ac_t""$CC" 1>&6
+else
+  echo "$ac_t""no" 1>&6
+fi
+
+  if test -z "$CC"; then
+    case "`uname -s`" in
+    *win32* | *WIN32*)
+      # Extract the first word of "cl", so it can be a program name with args.
+set dummy cl; ac_word=$2
+echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
+echo "configure:1813: checking for $ac_word" >&5
+if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then
+  echo $ac_n "(cached) $ac_c" 1>&6
+else
+  if test -n "$CC"; then
+  ac_cv_prog_CC="$CC" # Let the user override the test.
+else
+  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=":"
+  for ac_dir in $PATH; do
+    test -z "$ac_dir" && ac_dir=.
+    if test -f $ac_dir/$ac_word; then
+      ac_cv_prog_CC="cl"
+      break
+    fi
+  done
+  IFS="$ac_save_ifs"
+fi
+fi
+CC="$ac_cv_prog_CC"
+if test -n "$CC"; then
+  echo "$ac_t""$CC" 1>&6
+else
+  echo "$ac_t""no" 1>&6
+fi
+ ;;
+    esac
+  fi
+  test -z "$CC" && { echo "configure: error: no acceptable cc found in \$PATH" 1>&2; exit 1; }
+fi
+
+echo $ac_n "checking whether the C compiler ($CC $CFLAGS $LDFLAGS) works""... $ac_c" 1>&6
+echo "configure:1844: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) works" >&5
+
+ac_ext=c
+# CFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options.
+ac_cpp='$CPP $CPPFLAGS'
+ac_compile='${CC-cc} -c $CFLAGS $CPPFLAGS conftest.$ac_ext 1>&5'
+ac_link='${CC-cc} -o conftest${ac_exeext} $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5'
+cross_compiling=$ac_cv_prog_cc_cross
+
+cat > conftest.$ac_ext <<EOF
+#line 1854 "configure"
+#include "confdefs.h"
+main(){return(0);}
+EOF
+if { (eval echo configure:1858: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+  ac_cv_prog_cc_works=yes
+  # If we can't run a trivial program, we are probably using a cross compiler.
+  if (./conftest; exit) 2>/dev/null; then
+    ac_cv_prog_cc_cross=no
+  else
+    ac_cv_prog_cc_cross=yes
+  fi
+else
+  echo "configure: failed program was:" >&5
+  cat conftest.$ac_ext >&5
+  ac_cv_prog_cc_works=no
+fi
+rm -fr conftest*
+
+echo "$ac_t""$ac_cv_prog_cc_works" 1>&6
+if test $ac_cv_prog_cc_works = no; then
+  { echo "configure: error: installation or configuration problem: C compiler cannot create executables." 1>&2; exit 1; }
+fi
+echo $ac_n "checking whether the C compiler ($CC $CFLAGS $LDFLAGS) is a cross-compiler""... $ac_c" 1>&6
+echo "configure:1878: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) is a cross-compiler" >&5
+echo "$ac_t""$ac_cv_prog_cc_cross" 1>&6
+cross_compiling=$ac_cv_prog_cc_cross
+
+echo $ac_n "checking whether we are using GNU C""... $ac_c" 1>&6
+echo "configure:1883: checking whether we are using GNU C" >&5
+if eval "test \"`echo '$''{'ac_cv_prog_gcc'+set}'`\" = set"; then
+  echo $ac_n "(cached) $ac_c" 1>&6
+else
+  cat > conftest.c <<EOF
+#ifdef __GNUC__
+  yes;
+#endif
+EOF
+if { ac_try='${CC-cc} -E conftest.c'; { (eval echo configure:1892: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }; } | egrep yes >/dev/null 2>&1; then
+  ac_cv_prog_gcc=yes
+else
+  ac_cv_prog_gcc=no
+fi
+fi
+
+echo "$ac_t""$ac_cv_prog_gcc" 1>&6
+
+if test $ac_cv_prog_gcc = yes; then
+  GCC=yes
+else
+  GCC=
+fi
+
+ac_test_CFLAGS="${CFLAGS+set}"
+ac_save_CFLAGS="$CFLAGS"
+CFLAGS=
+echo $ac_n "checking whether ${CC-cc} accepts -g""... $ac_c" 1>&6
+echo "configure:1911: checking whether ${CC-cc} accepts -g" >&5
+if eval "test \"`echo '$''{'ac_cv_prog_cc_g'+set}'`\" = set"; then
+  echo $ac_n "(cached) $ac_c" 1>&6
+else
+  echo 'void f(){}' > conftest.c
+if test -z "`${CC-cc} -g -c conftest.c 2>&1`"; then
+  ac_cv_prog_cc_g=yes
+else
+  ac_cv_prog_cc_g=no
+fi
+rm -f conftest*
+
+fi
+
+echo "$ac_t""$ac_cv_prog_cc_g" 1>&6
+if test "$ac_test_CFLAGS" = set; then
+  CFLAGS="$ac_save_CFLAGS"
+elif test $ac_cv_prog_cc_g = yes; then
+  if test "$GCC" = yes; then
+    CFLAGS="-g -O2"
+  else
+    CFLAGS="-g"
+  fi
+else
+  if test "$GCC" = yes; then
+    CFLAGS="-O2"
+  else
+    CFLAGS=
+  fi
+fi
+
+# Find a good install program.  We prefer a C program (faster),
+# so one script is as good as another.  But avoid the broken or
+# incompatible versions:
+# SysV /etc/install, /usr/sbin/install
+# SunOS /usr/etc/install
+# IRIX /sbin/install
+# AIX /bin/install
+# AIX 4 /usr/bin/installbsd, which doesn't work without a -g flag
+# AFS /usr/afsws/bin/install, which mishandles nonexistent args
+# SVR4 /usr/ucb/install, which tries to use the nonexistent group "staff"
+# ./install, which can be erroneously created by make from ./install.sh.
+echo $ac_n "checking for a BSD compatible install""... $ac_c" 1>&6
+echo "configure:1954: checking for a BSD compatible install" >&5
+if test -z "$INSTALL"; then
+if eval "test \"`echo '$''{'ac_cv_path_install'+set}'`\" = set"; then
+  echo $ac_n "(cached) $ac_c" 1>&6
+else
+    IFS="${IFS= 	}"; ac_save_IFS="$IFS"; IFS=":"
+  for ac_dir in $PATH; do
+    # Account for people who put trailing slashes in PATH elements.
+    case "$ac_dir/" in
+    /|./|.//|/etc/*|/usr/sbin/*|/usr/etc/*|/sbin/*|/usr/afsws/bin/*|/usr/ucb/*) ;;
+    *)
+      # OSF1 and SCO ODT 3.0 have their own names for install.
+      # Don't use installbsd from OSF since it installs stuff as root
+      # by default.
+      for ac_prog in ginstall scoinst install; do
+        if test -f $ac_dir/$ac_prog; then
+	  if test $ac_prog = install &&
+            grep dspmsg $ac_dir/$ac_prog >/dev/null 2>&1; then
+	    # AIX install.  It has an incompatible calling convention.
+	    :
+	  else
+	    ac_cv_path_install="$ac_dir/$ac_prog -c"
+	    break 2
+	  fi
+	fi
+      done
+      ;;
+    esac
+  done
+  IFS="$ac_save_IFS"
+
+fi
+  if test "${ac_cv_path_install+set}" = set; then
+    INSTALL="$ac_cv_path_install"
+  else
+    # As a last resort, use the slow shell script.  We don't cache a
+    # path for INSTALL within a source directory, because that will
+    # break other packages using the cache if that directory is
+    # removed, or if the path is relative.
+    INSTALL="$ac_install_sh"
+  fi
+fi
+echo "$ac_t""$INSTALL" 1>&6
+
+# Use test -z because SunOS4 sh mishandles braces in ${var-val}.
+# It thinks the first close brace ends the variable substitution.
+test -z "$INSTALL_PROGRAM" && INSTALL_PROGRAM='${INSTALL}'
+
+test -z "$INSTALL_DATA" && INSTALL_DATA='${INSTALL} -m 644'
+
+
+# Put a plausible default for CC_FOR_BUILD in Makefile.
+if test "x$cross_compiling" = "xno"; then
+  CC_FOR_BUILD='$(CC)'
+else
+  CC_FOR_BUILD=gcc
+fi
+
+
+
+
+AR=${AR-ar}
+
+# Extract the first word of "ranlib", so it can be a program name with args.
+set dummy ranlib; ac_word=$2
+echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
+echo "configure:2020: checking for $ac_word" >&5
+if eval "test \"`echo '$''{'ac_cv_prog_RANLIB'+set}'`\" = set"; then
+  echo $ac_n "(cached) $ac_c" 1>&6
+else
+  if test -n "$RANLIB"; then
+  ac_cv_prog_RANLIB="$RANLIB" # Let the user override the test.
+else
+  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=":"
+  for ac_dir in $PATH; do
+    test -z "$ac_dir" && ac_dir=.
+    if test -f $ac_dir/$ac_word; then
+      ac_cv_prog_RANLIB="ranlib"
+      break
+    fi
+  done
+  IFS="$ac_save_ifs"
+  test -z "$ac_cv_prog_RANLIB" && ac_cv_prog_RANLIB=":"
+fi
+fi
+RANLIB="$ac_cv_prog_RANLIB"
+if test -n "$RANLIB"; then
+  echo "$ac_t""$RANLIB" 1>&6
+else
+  echo "$ac_t""no" 1>&6
+fi
+
+
+ALL_LINGUAS=
+                              
+   for ac_hdr in argz.h limits.h locale.h nl_types.h malloc.h string.h \
+unistd.h values.h sys/param.h
+do
+ac_safe=`echo "$ac_hdr" | sed 'y%./+-%__p_%'`
+echo $ac_n "checking for $ac_hdr""... $ac_c" 1>&6
+echo "configure:2054: checking for $ac_hdr" >&5
+if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then
+  echo $ac_n "(cached) $ac_c" 1>&6
+else
+  cat > conftest.$ac_ext <<EOF
+#line 2059 "configure"
+#include "confdefs.h"
+#include <$ac_hdr>
+EOF
+ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
+{ (eval echo configure:2064: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
+if test -z "$ac_err"; then
+  rm -rf conftest*
+  eval "ac_cv_header_$ac_safe=yes"
+else
+  echo "$ac_err" >&5
+  echo "configure: failed program was:" >&5
+  cat conftest.$ac_ext >&5
+  rm -rf conftest*
+  eval "ac_cv_header_$ac_safe=no"
+fi
+rm -f conftest*
+fi
+if eval "test \"`echo '$ac_cv_header_'$ac_safe`\" = yes"; then
+  echo "$ac_t""yes" 1>&6
+    ac_tr_hdr=HAVE_`echo $ac_hdr | sed 'y%abcdefghijklmnopqrstuvwxyz./-%ABCDEFGHIJKLMNOPQRSTUVWXYZ___%'`
+  cat >> confdefs.h <<EOF
+#define $ac_tr_hdr 1
+EOF
+ 
+else
+  echo "$ac_t""no" 1>&6
+fi
+done
+
+   for ac_func in getcwd munmap putenv setenv setlocale strchr strcasecmp \
+__argz_count __argz_stringify __argz_next
+do
+echo $ac_n "checking for $ac_func""... $ac_c" 1>&6
+echo "configure:2094: checking for $ac_func" >&5
+if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then
+  echo $ac_n "(cached) $ac_c" 1>&6
+else
+  cat > conftest.$ac_ext <<EOF
+#line 2099 "configure"
+#include "confdefs.h"
+/* System header to define __stub macros and hopefully few prototypes,
+    which can conflict with char $ac_func(); below.  */
+#include <assert.h>
+/* Override any gcc2 internal prototype to avoid an error.  */
+/* We use char because int might match the return type of a gcc2
+    builtin and then its argument prototype would still apply.  */
+char $ac_func();
+
+int main() {
+
+/* The GNU C library defines this for functions which it implements
+    to always fail with ENOSYS.  Some functions are actually named
+    something starting with __ and the normal name is an alias.  */
+#if defined (__stub_$ac_func) || defined (__stub___$ac_func)
+choke me
+#else
+$ac_func();
+#endif
+
+; return 0; }
+EOF
+if { (eval echo configure:2122: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+  rm -rf conftest*
+  eval "ac_cv_func_$ac_func=yes"
+else
+  echo "configure: failed program was:" >&5
+  cat conftest.$ac_ext >&5
+  rm -rf conftest*
+  eval "ac_cv_func_$ac_func=no"
+fi
+rm -f conftest*
+fi
+
+if eval "test \"`echo '$ac_cv_func_'$ac_func`\" = yes"; then
+  echo "$ac_t""yes" 1>&6
+    ac_tr_func=HAVE_`echo $ac_func | tr 'abcdefghijklmnopqrstuvwxyz' 'ABCDEFGHIJKLMNOPQRSTUVWXYZ'`
+  cat >> confdefs.h <<EOF
+#define $ac_tr_func 1
+EOF
+ 
+else
+  echo "$ac_t""no" 1>&6
+fi
+done
+
+
+   if test "${ac_cv_func_stpcpy+set}" != "set"; then
+     for ac_func in stpcpy
+do
+echo $ac_n "checking for $ac_func""... $ac_c" 1>&6
+echo "configure:2151: checking for $ac_func" >&5
+if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then
+  echo $ac_n "(cached) $ac_c" 1>&6
+else
+  cat > conftest.$ac_ext <<EOF
+#line 2156 "configure"
+#include "confdefs.h"
+/* System header to define __stub macros and hopefully few prototypes,
+    which can conflict with char $ac_func(); below.  */
+#include <assert.h>
+/* Override any gcc2 internal prototype to avoid an error.  */
+/* We use char because int might match the return type of a gcc2
+    builtin and then its argument prototype would still apply.  */
+char $ac_func();
+
+int main() {
+
+/* The GNU C library defines this for functions which it implements
+    to always fail with ENOSYS.  Some functions are actually named
+    something starting with __ and the normal name is an alias.  */
+#if defined (__stub_$ac_func) || defined (__stub___$ac_func)
+choke me
+#else
+$ac_func();
+#endif
+
+; return 0; }
+EOF
+if { (eval echo configure:2179: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+  rm -rf conftest*
+  eval "ac_cv_func_$ac_func=yes"
+else
+  echo "configure: failed program was:" >&5
+  cat conftest.$ac_ext >&5
+  rm -rf conftest*
+  eval "ac_cv_func_$ac_func=no"
+fi
+rm -f conftest*
+fi
+
+if eval "test \"`echo '$ac_cv_func_'$ac_func`\" = yes"; then
+  echo "$ac_t""yes" 1>&6
+    ac_tr_func=HAVE_`echo $ac_func | tr 'abcdefghijklmnopqrstuvwxyz' 'ABCDEFGHIJKLMNOPQRSTUVWXYZ'`
+  cat >> confdefs.h <<EOF
+#define $ac_tr_func 1
+EOF
+ 
+else
+  echo "$ac_t""no" 1>&6
+fi
+done
+
+   fi
+   if test "${ac_cv_func_stpcpy}" = "yes"; then
+     cat >> confdefs.h <<\EOF
+#define HAVE_STPCPY 1
+EOF
+
+   fi
+
+   if test $ac_cv_header_locale_h = yes; then
+    echo $ac_n "checking for LC_MESSAGES""... $ac_c" 1>&6
+echo "configure:2213: checking for LC_MESSAGES" >&5
+if eval "test \"`echo '$''{'am_cv_val_LC_MESSAGES'+set}'`\" = set"; then
+  echo $ac_n "(cached) $ac_c" 1>&6
+else
+  cat > conftest.$ac_ext <<EOF
+#line 2218 "configure"
+#include "confdefs.h"
+#include <locale.h>
+int main() {
+return LC_MESSAGES
+; return 0; }
+EOF
+if { (eval echo configure:2225: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+  rm -rf conftest*
+  am_cv_val_LC_MESSAGES=yes
+else
+  echo "configure: failed program was:" >&5
+  cat conftest.$ac_ext >&5
+  rm -rf conftest*
+  am_cv_val_LC_MESSAGES=no
+fi
+rm -f conftest*
+fi
+
+echo "$ac_t""$am_cv_val_LC_MESSAGES" 1>&6
+    if test $am_cv_val_LC_MESSAGES = yes; then
+      cat >> confdefs.h <<\EOF
+#define HAVE_LC_MESSAGES 1
+EOF
+
+    fi
+  fi
+   echo $ac_n "checking whether NLS is requested""... $ac_c" 1>&6
+echo "configure:2246: checking whether NLS is requested" >&5
+        # Check whether --enable-nls or --disable-nls was given.
+if test "${enable_nls+set}" = set; then
+  enableval="$enable_nls"
+  USE_NLS=$enableval
+else
+  USE_NLS=yes
+fi
+
+    echo "$ac_t""$USE_NLS" 1>&6
+    
+
+    USE_INCLUDED_LIBINTL=no
+
+        if test "$USE_NLS" = "yes"; then
+      cat >> confdefs.h <<\EOF
+#define ENABLE_NLS 1
+EOF
+
+      echo $ac_n "checking whether included gettext is requested""... $ac_c" 1>&6
+echo "configure:2266: checking whether included gettext is requested" >&5
+      # Check whether --with-included-gettext or --without-included-gettext was given.
+if test "${with_included_gettext+set}" = set; then
+  withval="$with_included_gettext"
+  nls_cv_force_use_gnu_gettext=$withval
+else
+  nls_cv_force_use_gnu_gettext=no
+fi
+
+      echo "$ac_t""$nls_cv_force_use_gnu_gettext" 1>&6
+
+      nls_cv_use_gnu_gettext="$nls_cv_force_use_gnu_gettext"
+      if test "$nls_cv_force_use_gnu_gettext" != "yes"; then
+                        		nls_cv_header_intl=
+	nls_cv_header_libgt=
+	CATOBJEXT=NONE
+
+	ac_safe=`echo "libintl.h" | sed 'y%./+-%__p_%'`
+echo $ac_n "checking for libintl.h""... $ac_c" 1>&6
+echo "configure:2285: checking for libintl.h" >&5
+if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then
+  echo $ac_n "(cached) $ac_c" 1>&6
+else
+  cat > conftest.$ac_ext <<EOF
+#line 2290 "configure"
+#include "confdefs.h"
+#include <libintl.h>
+EOF
+ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
+{ (eval echo configure:2295: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
+if test -z "$ac_err"; then
+  rm -rf conftest*
+  eval "ac_cv_header_$ac_safe=yes"
+else
+  echo "$ac_err" >&5
+  echo "configure: failed program was:" >&5
+  cat conftest.$ac_ext >&5
+  rm -rf conftest*
+  eval "ac_cv_header_$ac_safe=no"
+fi
+rm -f conftest*
+fi
+if eval "test \"`echo '$ac_cv_header_'$ac_safe`\" = yes"; then
+  echo "$ac_t""yes" 1>&6
+  echo $ac_n "checking for gettext in libc""... $ac_c" 1>&6
+echo "configure:2312: checking for gettext in libc" >&5
+if eval "test \"`echo '$''{'gt_cv_func_gettext_libc'+set}'`\" = set"; then
+  echo $ac_n "(cached) $ac_c" 1>&6
+else
+  cat > conftest.$ac_ext <<EOF
+#line 2317 "configure"
+#include "confdefs.h"
+#include <libintl.h>
+int main() {
+return (int) gettext ("")
+; return 0; }
+EOF
+if { (eval echo configure:2324: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+  rm -rf conftest*
+  gt_cv_func_gettext_libc=yes
+else
+  echo "configure: failed program was:" >&5
+  cat conftest.$ac_ext >&5
+  rm -rf conftest*
+  gt_cv_func_gettext_libc=no
+fi
+rm -f conftest*
+fi
+
+echo "$ac_t""$gt_cv_func_gettext_libc" 1>&6
+
+	   if test "$gt_cv_func_gettext_libc" != "yes"; then
+	     echo $ac_n "checking for bindtextdomain in -lintl""... $ac_c" 1>&6
+echo "configure:2340: checking for bindtextdomain in -lintl" >&5
+ac_lib_var=`echo intl'_'bindtextdomain | sed 'y%./+-%__p_%'`
+if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
+  echo $ac_n "(cached) $ac_c" 1>&6
+else
+  ac_save_LIBS="$LIBS"
+LIBS="-lintl  $LIBS"
+cat > conftest.$ac_ext <<EOF
+#line 2348 "configure"
+#include "confdefs.h"
+/* Override any gcc2 internal prototype to avoid an error.  */
+/* We use char because int might match the return type of a gcc2
+    builtin and then its argument prototype would still apply.  */
+char bindtextdomain();
+
+int main() {
+bindtextdomain()
+; return 0; }
+EOF
+if { (eval echo configure:2359: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+  rm -rf conftest*
+  eval "ac_cv_lib_$ac_lib_var=yes"
+else
+  echo "configure: failed program was:" >&5
+  cat conftest.$ac_ext >&5
+  rm -rf conftest*
+  eval "ac_cv_lib_$ac_lib_var=no"
+fi
+rm -f conftest*
+LIBS="$ac_save_LIBS"
+
+fi
+if eval "test \"`echo '$ac_cv_lib_'$ac_lib_var`\" = yes"; then
+  echo "$ac_t""yes" 1>&6
+  echo $ac_n "checking for gettext in libintl""... $ac_c" 1>&6
+echo "configure:2375: checking for gettext in libintl" >&5
+if eval "test \"`echo '$''{'gt_cv_func_gettext_libintl'+set}'`\" = set"; then
+  echo $ac_n "(cached) $ac_c" 1>&6
+else
+  cat > conftest.$ac_ext <<EOF
+#line 2380 "configure"
+#include "confdefs.h"
+
+int main() {
+return (int) gettext ("")
+; return 0; }
+EOF
+if { (eval echo configure:2387: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+  rm -rf conftest*
+  gt_cv_func_gettext_libintl=yes
+else
+  echo "configure: failed program was:" >&5
+  cat conftest.$ac_ext >&5
+  rm -rf conftest*
+  gt_cv_func_gettext_libintl=no
+fi
+rm -f conftest*
+fi
+
+echo "$ac_t""$gt_cv_func_gettext_libintl" 1>&6
+else
+  echo "$ac_t""no" 1>&6
+fi
+
+	   fi
+
+	   if test "$gt_cv_func_gettext_libc" = "yes" \
+	      || test "$gt_cv_func_gettext_libintl" = "yes"; then
+	      cat >> confdefs.h <<\EOF
+#define HAVE_GETTEXT 1
+EOF
+
+	      # Extract the first word of "msgfmt", so it can be a program name with args.
+set dummy msgfmt; ac_word=$2
+echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
+echo "configure:2415: checking for $ac_word" >&5
+if eval "test \"`echo '$''{'ac_cv_path_MSGFMT'+set}'`\" = set"; then
+  echo $ac_n "(cached) $ac_c" 1>&6
+else
+  case "$MSGFMT" in
+  /*)
+  ac_cv_path_MSGFMT="$MSGFMT" # Let the user override the test with a path.
+  ;;
+  *)
+  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS="${IFS}:"
+  for ac_dir in $PATH; do
+    test -z "$ac_dir" && ac_dir=.
+    if test -f $ac_dir/$ac_word; then
+      if test -z "`$ac_dir/$ac_word -h 2>&1 | grep 'dv '`"; then
+	ac_cv_path_MSGFMT="$ac_dir/$ac_word"
+	break
+      fi
+    fi
+  done
+  IFS="$ac_save_ifs"
+  test -z "$ac_cv_path_MSGFMT" && ac_cv_path_MSGFMT="no"
+  ;;
+esac
+fi
+MSGFMT="$ac_cv_path_MSGFMT"
+if test -n "$MSGFMT"; then
+  echo "$ac_t""$MSGFMT" 1>&6
+else
+  echo "$ac_t""no" 1>&6
+fi
+	      if test "$MSGFMT" != "no"; then
+		for ac_func in dcgettext
+do
+echo $ac_n "checking for $ac_func""... $ac_c" 1>&6
+echo "configure:2449: checking for $ac_func" >&5
+if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then
+  echo $ac_n "(cached) $ac_c" 1>&6
+else
+  cat > conftest.$ac_ext <<EOF
+#line 2454 "configure"
+#include "confdefs.h"
+/* System header to define __stub macros and hopefully few prototypes,
+    which can conflict with char $ac_func(); below.  */
+#include <assert.h>
+/* Override any gcc2 internal prototype to avoid an error.  */
+/* We use char because int might match the return type of a gcc2
+    builtin and then its argument prototype would still apply.  */
+char $ac_func();
+
+int main() {
+
+/* The GNU C library defines this for functions which it implements
+    to always fail with ENOSYS.  Some functions are actually named
+    something starting with __ and the normal name is an alias.  */
+#if defined (__stub_$ac_func) || defined (__stub___$ac_func)
+choke me
+#else
+$ac_func();
+#endif
+
+; return 0; }
+EOF
+if { (eval echo configure:2477: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+  rm -rf conftest*
+  eval "ac_cv_func_$ac_func=yes"
+else
+  echo "configure: failed program was:" >&5
+  cat conftest.$ac_ext >&5
+  rm -rf conftest*
+  eval "ac_cv_func_$ac_func=no"
+fi
+rm -f conftest*
+fi
+
+if eval "test \"`echo '$ac_cv_func_'$ac_func`\" = yes"; then
+  echo "$ac_t""yes" 1>&6
+    ac_tr_func=HAVE_`echo $ac_func | tr 'abcdefghijklmnopqrstuvwxyz' 'ABCDEFGHIJKLMNOPQRSTUVWXYZ'`
+  cat >> confdefs.h <<EOF
+#define $ac_tr_func 1
+EOF
+ 
+else
+  echo "$ac_t""no" 1>&6
+fi
+done
+
+		# Extract the first word of "gmsgfmt", so it can be a program name with args.
+set dummy gmsgfmt; ac_word=$2
+echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
+echo "configure:2504: checking for $ac_word" >&5
+if eval "test \"`echo '$''{'ac_cv_path_GMSGFMT'+set}'`\" = set"; then
+  echo $ac_n "(cached) $ac_c" 1>&6
+else
+  case "$GMSGFMT" in
+  /*)
+  ac_cv_path_GMSGFMT="$GMSGFMT" # Let the user override the test with a path.
+  ;;
+  ?:/*)			 
+  ac_cv_path_GMSGFMT="$GMSGFMT" # Let the user override the test with a dos path.
+  ;;
+  *)
+  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=":"
+  for ac_dir in $PATH; do
+    test -z "$ac_dir" && ac_dir=.
+    if test -f $ac_dir/$ac_word; then
+      ac_cv_path_GMSGFMT="$ac_dir/$ac_word"
+      break
+    fi
+  done
+  IFS="$ac_save_ifs"
+  test -z "$ac_cv_path_GMSGFMT" && ac_cv_path_GMSGFMT="$MSGFMT"
+  ;;
+esac
+fi
+GMSGFMT="$ac_cv_path_GMSGFMT"
+if test -n "$GMSGFMT"; then
+  echo "$ac_t""$GMSGFMT" 1>&6
+else
+  echo "$ac_t""no" 1>&6
+fi
+
+		# Extract the first word of "xgettext", so it can be a program name with args.
+set dummy xgettext; ac_word=$2
+echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
+echo "configure:2539: checking for $ac_word" >&5
+if eval "test \"`echo '$''{'ac_cv_path_XGETTEXT'+set}'`\" = set"; then
+  echo $ac_n "(cached) $ac_c" 1>&6
+else
+  case "$XGETTEXT" in
+  /*)
+  ac_cv_path_XGETTEXT="$XGETTEXT" # Let the user override the test with a path.
+  ;;
+  *)
+  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS="${IFS}:"
+  for ac_dir in $PATH; do
+    test -z "$ac_dir" && ac_dir=.
+    if test -f $ac_dir/$ac_word; then
+      if test -z "`$ac_dir/$ac_word -h 2>&1 | grep '(HELP)'`"; then
+	ac_cv_path_XGETTEXT="$ac_dir/$ac_word"
+	break
+      fi
+    fi
+  done
+  IFS="$ac_save_ifs"
+  test -z "$ac_cv_path_XGETTEXT" && ac_cv_path_XGETTEXT=":"
+  ;;
+esac
+fi
+XGETTEXT="$ac_cv_path_XGETTEXT"
+if test -n "$XGETTEXT"; then
+  echo "$ac_t""$XGETTEXT" 1>&6
+else
+  echo "$ac_t""no" 1>&6
+fi
+
+		cat > conftest.$ac_ext <<EOF
+#line 2571 "configure"
+#include "confdefs.h"
+
+int main() {
+extern int _nl_msg_cat_cntr;
+			       return _nl_msg_cat_cntr
+; return 0; }
+EOF
+if { (eval echo configure:2579: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+  rm -rf conftest*
+  CATOBJEXT=.gmo
+		   DATADIRNAME=share
+else
+  echo "configure: failed program was:" >&5
+  cat conftest.$ac_ext >&5
+  rm -rf conftest*
+  CATOBJEXT=.mo
+		   DATADIRNAME=lib
+fi
+rm -f conftest*
+		INSTOBJEXT=.mo
+	      fi
+	    fi
+	
+else
+  echo "$ac_t""no" 1>&6
+fi
+
+
+	        
+        if test "$CATOBJEXT" = "NONE"; then
+	  	  	  nls_cv_use_gnu_gettext=yes
+        fi
+      fi
+
+      if test "$nls_cv_use_gnu_gettext" = "yes"; then
+                INTLOBJS="\$(GETTOBJS)"
+        # Extract the first word of "msgfmt", so it can be a program name with args.
+set dummy msgfmt; ac_word=$2
+echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
+echo "configure:2611: checking for $ac_word" >&5
+if eval "test \"`echo '$''{'ac_cv_path_MSGFMT'+set}'`\" = set"; then
+  echo $ac_n "(cached) $ac_c" 1>&6
+else
+  case "$MSGFMT" in
+  /*)
+  ac_cv_path_MSGFMT="$MSGFMT" # Let the user override the test with a path.
+  ;;
+  *)
+  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS="${IFS}:"
+  for ac_dir in $PATH; do
+    test -z "$ac_dir" && ac_dir=.
+    if test -f $ac_dir/$ac_word; then
+      if test -z "`$ac_dir/$ac_word -h 2>&1 | grep 'dv '`"; then
+	ac_cv_path_MSGFMT="$ac_dir/$ac_word"
+	break
+      fi
+    fi
+  done
+  IFS="$ac_save_ifs"
+  test -z "$ac_cv_path_MSGFMT" && ac_cv_path_MSGFMT="msgfmt"
+  ;;
+esac
+fi
+MSGFMT="$ac_cv_path_MSGFMT"
+if test -n "$MSGFMT"; then
+  echo "$ac_t""$MSGFMT" 1>&6
+else
+  echo "$ac_t""no" 1>&6
+fi
+
+        # Extract the first word of "gmsgfmt", so it can be a program name with args.
+set dummy gmsgfmt; ac_word=$2
+echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
+echo "configure:2645: checking for $ac_word" >&5
+if eval "test \"`echo '$''{'ac_cv_path_GMSGFMT'+set}'`\" = set"; then
+  echo $ac_n "(cached) $ac_c" 1>&6
+else
+  case "$GMSGFMT" in
+  /*)
+  ac_cv_path_GMSGFMT="$GMSGFMT" # Let the user override the test with a path.
+  ;;
+  ?:/*)			 
+  ac_cv_path_GMSGFMT="$GMSGFMT" # Let the user override the test with a dos path.
+  ;;
+  *)
+  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=":"
+  for ac_dir in $PATH; do
+    test -z "$ac_dir" && ac_dir=.
+    if test -f $ac_dir/$ac_word; then
+      ac_cv_path_GMSGFMT="$ac_dir/$ac_word"
+      break
+    fi
+  done
+  IFS="$ac_save_ifs"
+  test -z "$ac_cv_path_GMSGFMT" && ac_cv_path_GMSGFMT="$MSGFMT"
+  ;;
+esac
+fi
+GMSGFMT="$ac_cv_path_GMSGFMT"
+if test -n "$GMSGFMT"; then
+  echo "$ac_t""$GMSGFMT" 1>&6
+else
+  echo "$ac_t""no" 1>&6
+fi
+
+        # Extract the first word of "xgettext", so it can be a program name with args.
+set dummy xgettext; ac_word=$2
+echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
+echo "configure:2680: checking for $ac_word" >&5
+if eval "test \"`echo '$''{'ac_cv_path_XGETTEXT'+set}'`\" = set"; then
+  echo $ac_n "(cached) $ac_c" 1>&6
+else
+  case "$XGETTEXT" in
+  /*)
+  ac_cv_path_XGETTEXT="$XGETTEXT" # Let the user override the test with a path.
+  ;;
+  *)
+  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS="${IFS}:"
+  for ac_dir in $PATH; do
+    test -z "$ac_dir" && ac_dir=.
+    if test -f $ac_dir/$ac_word; then
+      if test -z "`$ac_dir/$ac_word -h 2>&1 | grep '(HELP)'`"; then
+	ac_cv_path_XGETTEXT="$ac_dir/$ac_word"
+	break
+      fi
+    fi
+  done
+  IFS="$ac_save_ifs"
+  test -z "$ac_cv_path_XGETTEXT" && ac_cv_path_XGETTEXT=":"
+  ;;
+esac
+fi
+XGETTEXT="$ac_cv_path_XGETTEXT"
+if test -n "$XGETTEXT"; then
+  echo "$ac_t""$XGETTEXT" 1>&6
+else
+  echo "$ac_t""no" 1>&6
+fi
+
+        
+	USE_INCLUDED_LIBINTL=yes
+        CATOBJEXT=.gmo
+        INSTOBJEXT=.mo
+        DATADIRNAME=share
+	INTLDEPS='$(top_builddir)/../intl/libintl.a'
+	INTLLIBS=$INTLDEPS
+	LIBS=`echo $LIBS | sed -e 's/-lintl//'`
+        nls_cv_header_intl=libintl.h
+        nls_cv_header_libgt=libgettext.h
+      fi
+
+            if test "$XGETTEXT" != ":"; then
+			if $XGETTEXT --omit-header /dev/null 2> /dev/null; then
+	  : ;
+	else
+	  echo "$ac_t""found xgettext programs is not GNU xgettext; ignore it" 1>&6
+	  XGETTEXT=":"
+	fi
+      fi
+
+      # We need to process the po/ directory.
+      POSUB=po
+    else
+      DATADIRNAME=share
+      nls_cv_header_intl=libintl.h
+      nls_cv_header_libgt=libgettext.h
+    fi
+
+    # If this is used in GNU gettext we have to set USE_NLS to `yes'
+    # because some of the sources are only built for this goal.
+    if test "$PACKAGE" = gettext; then
+      USE_NLS=yes
+      USE_INCLUDED_LIBINTL=yes
+    fi
+
+                for lang in $ALL_LINGUAS; do
+      GMOFILES="$GMOFILES $lang.gmo"
+      POFILES="$POFILES $lang.po"
+    done
+
+        
+    
+    
+    
+    
+    
+    
+    
+    
+    
+    
+  
+
+   if test "x$CATOBJEXT" != "x"; then
+     if test "x$ALL_LINGUAS" = "x"; then
+       LINGUAS=
+     else
+       echo $ac_n "checking for catalogs to be installed""... $ac_c" 1>&6
+echo "configure:2770: checking for catalogs to be installed" >&5
+       NEW_LINGUAS=
+       for lang in ${LINGUAS=$ALL_LINGUAS}; do
+         case "$ALL_LINGUAS" in
+          *$lang*) NEW_LINGUAS="$NEW_LINGUAS $lang" ;;
+         esac
+       done
+       LINGUAS=$NEW_LINGUAS
+       echo "$ac_t""$LINGUAS" 1>&6
+     fi
+
+          if test -n "$LINGUAS"; then
+       for lang in $LINGUAS; do CATALOGS="$CATALOGS $lang$CATOBJEXT"; done
+     fi
+   fi
+
+            if test $ac_cv_header_locale_h = yes; then
+     INCLUDE_LOCALE_H="#include <locale.h>"
+   else
+     INCLUDE_LOCALE_H="\
+/* The system does not provide the header <locale.h>.  Take care yourself.  */"
+   fi
+   
+
+            if test -f $srcdir/po2tbl.sed.in; then
+      if test "$CATOBJEXT" = ".cat"; then
+	 ac_safe=`echo "linux/version.h" | sed 'y%./+-%__p_%'`
+echo $ac_n "checking for linux/version.h""... $ac_c" 1>&6
+echo "configure:2798: checking for linux/version.h" >&5
+if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then
+  echo $ac_n "(cached) $ac_c" 1>&6
+else
+  cat > conftest.$ac_ext <<EOF
+#line 2803 "configure"
+#include "confdefs.h"
+#include <linux/version.h>
+EOF
+ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
+{ (eval echo configure:2808: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
+if test -z "$ac_err"; then
+  rm -rf conftest*
+  eval "ac_cv_header_$ac_safe=yes"
+else
+  echo "$ac_err" >&5
+  echo "configure: failed program was:" >&5
+  cat conftest.$ac_ext >&5
+  rm -rf conftest*
+  eval "ac_cv_header_$ac_safe=no"
+fi
+rm -f conftest*
+fi
+if eval "test \"`echo '$ac_cv_header_'$ac_safe`\" = yes"; then
+  echo "$ac_t""yes" 1>&6
+  msgformat=linux
+else
+  echo "$ac_t""no" 1>&6
+msgformat=xopen
+fi
+
+
+	          	 sed -e '/^#/d' $srcdir/$msgformat-msg.sed > po2msg.sed
+      fi
+            sed -e '/^#.*[^\\]$/d' -e '/^#$/d' \
+	 $srcdir/po2tbl.sed.in > po2tbl.sed
+   fi
+
+            if test "$PACKAGE" = "gettext"; then
+     GT_NO="#NO#"
+     GT_YES=
+   else
+     GT_NO=
+     GT_YES="#YES#"
+   fi
+   
+   
+
+   MKINSTALLDIRS="\$(srcdir)/../../mkinstalldirs"
+   
+
+      l=
+   
+
+            if test -d $srcdir/po; then
+      test -d po || mkdir po
+      if test "x$srcdir" != "x."; then
+	 if test "x`echo $srcdir | sed 's@/.*@@'`" = "x"; then
+	    posrcprefix="$srcdir/"
+	 else
+	    posrcprefix="../$srcdir/"
+	 fi
+      else
+	 posrcprefix="../"
+      fi
+      rm -f po/POTFILES
+      sed -e "/^#/d" -e "/^\$/d" -e "s,.*,	$posrcprefix& \\\\," -e "\$s/\(.*\) \\\\/\1/" \
+	 < $srcdir/po/POTFILES.in > po/POTFILES
+   fi
+  
+
+# Check for common headers.
+# FIXME: Seems to me this can cause problems for i386-windows hosts.
+# At one point there were hardcoded AC_DEFINE's if ${host} = i386-*-windows*.
+for ac_hdr in stdlib.h string.h strings.h unistd.h time.h
+do
+ac_safe=`echo "$ac_hdr" | sed 'y%./+-%__p_%'`
+echo $ac_n "checking for $ac_hdr""... $ac_c" 1>&6
+echo "configure:2877: checking for $ac_hdr" >&5
+if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then
+  echo $ac_n "(cached) $ac_c" 1>&6
+else
+  cat > conftest.$ac_ext <<EOF
+#line 2882 "configure"
+#include "confdefs.h"
+#include <$ac_hdr>
+EOF
+ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
+{ (eval echo configure:2887: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
+if test -z "$ac_err"; then
+  rm -rf conftest*
+  eval "ac_cv_header_$ac_safe=yes"
+else
+  echo "$ac_err" >&5
+  echo "configure: failed program was:" >&5
+  cat conftest.$ac_ext >&5
+  rm -rf conftest*
+  eval "ac_cv_header_$ac_safe=no"
+fi
+rm -f conftest*
+fi
+if eval "test \"`echo '$ac_cv_header_'$ac_safe`\" = yes"; then
+  echo "$ac_t""yes" 1>&6
+    ac_tr_hdr=HAVE_`echo $ac_hdr | sed 'y%abcdefghijklmnopqrstuvwxyz./-%ABCDEFGHIJKLMNOPQRSTUVWXYZ___%'`
+  cat >> confdefs.h <<EOF
+#define $ac_tr_hdr 1
+EOF
+ 
+else
+  echo "$ac_t""no" 1>&6
+fi
+done
+
+for ac_hdr in sys/time.h sys/resource.h
+do
+ac_safe=`echo "$ac_hdr" | sed 'y%./+-%__p_%'`
+echo $ac_n "checking for $ac_hdr""... $ac_c" 1>&6
+echo "configure:2917: checking for $ac_hdr" >&5
+if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then
+  echo $ac_n "(cached) $ac_c" 1>&6
+else
+  cat > conftest.$ac_ext <<EOF
+#line 2922 "configure"
+#include "confdefs.h"
+#include <$ac_hdr>
+EOF
+ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
+{ (eval echo configure:2927: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
+if test -z "$ac_err"; then
+  rm -rf conftest*
+  eval "ac_cv_header_$ac_safe=yes"
+else
+  echo "$ac_err" >&5
+  echo "configure: failed program was:" >&5
+  cat conftest.$ac_ext >&5
+  rm -rf conftest*
+  eval "ac_cv_header_$ac_safe=no"
+fi
+rm -f conftest*
+fi
+if eval "test \"`echo '$ac_cv_header_'$ac_safe`\" = yes"; then
+  echo "$ac_t""yes" 1>&6
+    ac_tr_hdr=HAVE_`echo $ac_hdr | sed 'y%abcdefghijklmnopqrstuvwxyz./-%ABCDEFGHIJKLMNOPQRSTUVWXYZ___%'`
+  cat >> confdefs.h <<EOF
+#define $ac_tr_hdr 1
+EOF
+ 
+else
+  echo "$ac_t""no" 1>&6
+fi
+done
+
+for ac_hdr in fcntl.h fpu_control.h
+do
+ac_safe=`echo "$ac_hdr" | sed 'y%./+-%__p_%'`
+echo $ac_n "checking for $ac_hdr""... $ac_c" 1>&6
+echo "configure:2957: checking for $ac_hdr" >&5
+if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then
+  echo $ac_n "(cached) $ac_c" 1>&6
+else
+  cat > conftest.$ac_ext <<EOF
+#line 2962 "configure"
+#include "confdefs.h"
+#include <$ac_hdr>
+EOF
+ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
+{ (eval echo configure:2967: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
+if test -z "$ac_err"; then
+  rm -rf conftest*
+  eval "ac_cv_header_$ac_safe=yes"
+else
+  echo "$ac_err" >&5
+  echo "configure: failed program was:" >&5
+  cat conftest.$ac_ext >&5
+  rm -rf conftest*
+  eval "ac_cv_header_$ac_safe=no"
+fi
+rm -f conftest*
+fi
+if eval "test \"`echo '$ac_cv_header_'$ac_safe`\" = yes"; then
+  echo "$ac_t""yes" 1>&6
+    ac_tr_hdr=HAVE_`echo $ac_hdr | sed 'y%abcdefghijklmnopqrstuvwxyz./-%ABCDEFGHIJKLMNOPQRSTUVWXYZ___%'`
+  cat >> confdefs.h <<EOF
+#define $ac_tr_hdr 1
+EOF
+ 
+else
+  echo "$ac_t""no" 1>&6
+fi
+done
+
+for ac_hdr in dlfcn.h errno.h sys/stat.h
+do
+ac_safe=`echo "$ac_hdr" | sed 'y%./+-%__p_%'`
+echo $ac_n "checking for $ac_hdr""... $ac_c" 1>&6
+echo "configure:2997: checking for $ac_hdr" >&5
+if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then
+  echo $ac_n "(cached) $ac_c" 1>&6
+else
+  cat > conftest.$ac_ext <<EOF
+#line 3002 "configure"
+#include "confdefs.h"
+#include <$ac_hdr>
+EOF
+ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
+{ (eval echo configure:3007: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
+if test -z "$ac_err"; then
+  rm -rf conftest*
+  eval "ac_cv_header_$ac_safe=yes"
+else
+  echo "$ac_err" >&5
+  echo "configure: failed program was:" >&5
+  cat conftest.$ac_ext >&5
+  rm -rf conftest*
+  eval "ac_cv_header_$ac_safe=no"
+fi
+rm -f conftest*
+fi
+if eval "test \"`echo '$ac_cv_header_'$ac_safe`\" = yes"; then
+  echo "$ac_t""yes" 1>&6
+    ac_tr_hdr=HAVE_`echo $ac_hdr | sed 'y%abcdefghijklmnopqrstuvwxyz./-%ABCDEFGHIJKLMNOPQRSTUVWXYZ___%'`
+  cat >> confdefs.h <<EOF
+#define $ac_tr_hdr 1
+EOF
+ 
+else
+  echo "$ac_t""no" 1>&6
+fi
+done
+
+for ac_func in getrusage time sigaction __setfpucw
+do
+echo $ac_n "checking for $ac_func""... $ac_c" 1>&6
+echo "configure:3036: checking for $ac_func" >&5
+if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then
+  echo $ac_n "(cached) $ac_c" 1>&6
+else
+  cat > conftest.$ac_ext <<EOF
+#line 3041 "configure"
+#include "confdefs.h"
+/* System header to define __stub macros and hopefully few prototypes,
+    which can conflict with char $ac_func(); below.  */
+#include <assert.h>
+/* Override any gcc2 internal prototype to avoid an error.  */
+/* We use char because int might match the return type of a gcc2
+    builtin and then its argument prototype would still apply.  */
+char $ac_func();
+
+int main() {
+
+/* The GNU C library defines this for functions which it implements
+    to always fail with ENOSYS.  Some functions are actually named
+    something starting with __ and the normal name is an alias.  */
+#if defined (__stub_$ac_func) || defined (__stub___$ac_func)
+choke me
+#else
+$ac_func();
+#endif
+
+; return 0; }
+EOF
+if { (eval echo configure:3064: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+  rm -rf conftest*
+  eval "ac_cv_func_$ac_func=yes"
+else
+  echo "configure: failed program was:" >&5
+  cat conftest.$ac_ext >&5
+  rm -rf conftest*
+  eval "ac_cv_func_$ac_func=no"
+fi
+rm -f conftest*
+fi
+
+if eval "test \"`echo '$ac_cv_func_'$ac_func`\" = yes"; then
+  echo "$ac_t""yes" 1>&6
+    ac_tr_func=HAVE_`echo $ac_func | tr 'abcdefghijklmnopqrstuvwxyz' 'ABCDEFGHIJKLMNOPQRSTUVWXYZ'`
+  cat >> confdefs.h <<EOF
+#define $ac_tr_func 1
+EOF
+ 
+else
+  echo "$ac_t""no" 1>&6
+fi
+done
+
+
+# Check for socket libraries
+echo $ac_n "checking for bind in -lsocket""... $ac_c" 1>&6
+echo "configure:3091: checking for bind in -lsocket" >&5
+ac_lib_var=`echo socket'_'bind | sed 'y%./+-%__p_%'`
+if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
+  echo $ac_n "(cached) $ac_c" 1>&6
+else
+  ac_save_LIBS="$LIBS"
+LIBS="-lsocket  $LIBS"
+cat > conftest.$ac_ext <<EOF
+#line 3099 "configure"
+#include "confdefs.h"
+/* Override any gcc2 internal prototype to avoid an error.  */
+/* We use char because int might match the return type of a gcc2
+    builtin and then its argument prototype would still apply.  */
+char bind();
+
+int main() {
+bind()
+; return 0; }
+EOF
+if { (eval echo configure:3110: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+  rm -rf conftest*
+  eval "ac_cv_lib_$ac_lib_var=yes"
+else
+  echo "configure: failed program was:" >&5
+  cat conftest.$ac_ext >&5
+  rm -rf conftest*
+  eval "ac_cv_lib_$ac_lib_var=no"
+fi
+rm -f conftest*
+LIBS="$ac_save_LIBS"
+
+fi
+if eval "test \"`echo '$ac_cv_lib_'$ac_lib_var`\" = yes"; then
+  echo "$ac_t""yes" 1>&6
+    ac_tr_lib=HAVE_LIB`echo socket | sed -e 's/[^a-zA-Z0-9_]/_/g' \
+    -e 'y/abcdefghijklmnopqrstuvwxyz/ABCDEFGHIJKLMNOPQRSTUVWXYZ/'`
+  cat >> confdefs.h <<EOF
+#define $ac_tr_lib 1
+EOF
+
+  LIBS="-lsocket $LIBS"
+
+else
+  echo "$ac_t""no" 1>&6
+fi
+
+echo $ac_n "checking for gethostbyname in -lnsl""... $ac_c" 1>&6
+echo "configure:3138: checking for gethostbyname in -lnsl" >&5
+ac_lib_var=`echo nsl'_'gethostbyname | sed 'y%./+-%__p_%'`
+if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
+  echo $ac_n "(cached) $ac_c" 1>&6
+else
+  ac_save_LIBS="$LIBS"
+LIBS="-lnsl  $LIBS"
+cat > conftest.$ac_ext <<EOF
+#line 3146 "configure"
+#include "confdefs.h"
+/* Override any gcc2 internal prototype to avoid an error.  */
+/* We use char because int might match the return type of a gcc2
+    builtin and then its argument prototype would still apply.  */
+char gethostbyname();
+
+int main() {
+gethostbyname()
+; return 0; }
+EOF
+if { (eval echo configure:3157: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+  rm -rf conftest*
+  eval "ac_cv_lib_$ac_lib_var=yes"
+else
+  echo "configure: failed program was:" >&5
+  cat conftest.$ac_ext >&5
+  rm -rf conftest*
+  eval "ac_cv_lib_$ac_lib_var=no"
+fi
+rm -f conftest*
+LIBS="$ac_save_LIBS"
+
+fi
+if eval "test \"`echo '$ac_cv_lib_'$ac_lib_var`\" = yes"; then
+  echo "$ac_t""yes" 1>&6
+    ac_tr_lib=HAVE_LIB`echo nsl | sed -e 's/[^a-zA-Z0-9_]/_/g' \
+    -e 'y/abcdefghijklmnopqrstuvwxyz/ABCDEFGHIJKLMNOPQRSTUVWXYZ/'`
+  cat >> confdefs.h <<EOF
+#define $ac_tr_lib 1
+EOF
+
+  LIBS="-lnsl $LIBS"
+
+else
+  echo "$ac_t""no" 1>&6
+fi
+
+
+. ${srcdir}/../../bfd/configure.host
+
+
+
+USE_MAINTAINER_MODE=no
+# Check whether --enable-maintainer-mode or --disable-maintainer-mode was given.
+if test "${enable_maintainer_mode+set}" = set; then
+  enableval="$enable_maintainer_mode"
+  case "${enableval}" in
+  yes)	MAINT="" USE_MAINTAINER_MODE=yes ;;
+  no)	MAINT="#" ;;
+  *)	{ echo "configure: error: "--enable-maintainer-mode does not take a value"" 1>&2; exit 1; }; MAINT="#" ;;
+esac
+if test x"$silent" != x"yes" && test x"$MAINT" = x""; then
+  echo "Setting maintainer mode" 6>&1
+fi
+else
+  MAINT="#"
+fi
+
+
+
+# Check whether --enable-sim-bswap or --disable-sim-bswap was given.
+if test "${enable_sim_bswap+set}" = set; then
+  enableval="$enable_sim_bswap"
+  case "${enableval}" in
+  yes)	sim_bswap="-DWITH_BSWAP=1 -DUSE_BSWAP=1";;
+  no)	sim_bswap="-DWITH_BSWAP=0";;
+  *)	{ echo "configure: error: "--enable-sim-bswap does not take a value"" 1>&2; exit 1; }; sim_bswap="";;
+esac
+if test x"$silent" != x"yes" && test x"$sim_bswap" != x""; then
+  echo "Setting bswap flags = $sim_bswap" 6>&1
+fi
+else
+  sim_bswap=""
+fi
+
+
+
+# Check whether --enable-sim-cflags or --disable-sim-cflags was given.
+if test "${enable_sim_cflags+set}" = set; then
+  enableval="$enable_sim_cflags"
+  case "${enableval}" in
+  yes)	 sim_cflags="-O2 -fomit-frame-pointer";;
+  trace) { echo "configure: error: "Please use --enable-sim-debug instead."" 1>&2; exit 1; }; sim_cflags="";;
+  no)	 sim_cflags="";;
+  *)	 sim_cflags=`echo "${enableval}" | sed -e "s/,/ /g"`;;
+esac
+if test x"$silent" != x"yes" && test x"$sim_cflags" != x""; then
+  echo "Setting sim cflags = $sim_cflags" 6>&1
+fi
+else
+  sim_cflags=""
+fi
+
+
+
+# Check whether --enable-sim-debug or --disable-sim-debug was given.
+if test "${enable_sim_debug+set}" = set; then
+  enableval="$enable_sim_debug"
+  case "${enableval}" in
+  yes) sim_debug="-DDEBUG=7 -DWITH_DEBUG=7";;
+  no)  sim_debug="-DDEBUG=0 -DWITH_DEBUG=0";;
+  *)   sim_debug="-DDEBUG='(${enableval})' -DWITH_DEBUG='(${enableval})'";;
+esac
+if test x"$silent" != x"yes" && test x"$sim_debug" != x""; then
+  echo "Setting sim debug = $sim_debug" 6>&1
+fi
+else
+  sim_debug=""
+fi
+
+
+
+# Check whether --enable-sim-stdio or --disable-sim-stdio was given.
+if test "${enable_sim_stdio+set}" = set; then
+  enableval="$enable_sim_stdio"
+  case "${enableval}" in
+  yes)	sim_stdio="-DWITH_STDIO=DO_USE_STDIO";;
+  no)	sim_stdio="-DWITH_STDIO=DONT_USE_STDIO";;
+  *)	{ echo "configure: error: "Unknown value $enableval passed to --enable-sim-stdio"" 1>&2; exit 1; }; sim_stdio="";;
+esac
+if test x"$silent" != x"yes" && test x"$sim_stdio" != x""; then
+  echo "Setting stdio flags = $sim_stdio" 6>&1
+fi
+else
+  sim_stdio=""
+fi
+
+
+
+# Check whether --enable-sim-trace or --disable-sim-trace was given.
+if test "${enable_sim_trace+set}" = set; then
+  enableval="$enable_sim_trace"
+  case "${enableval}" in
+  yes)	sim_trace="-DTRACE=1 -DWITH_TRACE=-1";;
+  no)	sim_trace="-DTRACE=0 -DWITH_TRACE=0";;
+  [-0-9]*)
+	sim_trace="-DTRACE='(${enableval})' -DWITH_TRACE='(${enableval})'";;
+  [a-z]*)
+	sim_trace=""
+	for x in `echo "$enableval" | sed -e "s/,/ /g"`; do
+	  if test x"$sim_trace" = x; then
+	    sim_trace="-DWITH_TRACE='(TRACE_$x"
+	  else
+	    sim_trace="${sim_trace}|TRACE_$x"
+	  fi
+	done
+	sim_trace="$sim_trace)'" ;;
+esac
+if test x"$silent" != x"yes" && test x"$sim_trace" != x""; then
+  echo "Setting sim trace = $sim_trace" 6>&1
+fi
+else
+  sim_trace=""
+fi
+
+
+
+# Check whether --enable-sim-profile or --disable-sim-profile was given.
+if test "${enable_sim_profile+set}" = set; then
+  enableval="$enable_sim_profile"
+  case "${enableval}" in
+  yes)	sim_profile="-DPROFILE=1 -DWITH_PROFILE=-1";;
+  no)	sim_profile="-DPROFILE=0 -DWITH_PROFILE=0";;
+  [-0-9]*)
+	sim_profile="-DPROFILE='(${enableval})' -DWITH_PROFILE='(${enableval})'";;
+  [a-z]*)
+	sim_profile=""
+	for x in `echo "$enableval" | sed -e "s/,/ /g"`; do
+	  if test x"$sim_profile" = x; then
+	    sim_profile="-DWITH_PROFILE='(PROFILE_$x"
+	  else
+	    sim_profile="${sim_profile}|PROFILE_$x"
+	  fi
+	done
+	sim_profile="$sim_profile)'" ;;
+esac
+if test x"$silent" != x"yes" && test x"$sim_profile" != x""; then
+  echo "Setting sim profile = $sim_profile" 6>&1
+fi
+else
+  sim_profile=""
+fi
+
+
+
+echo $ac_n "checking return type of signal handlers""... $ac_c" 1>&6
+echo "configure:3333: checking return type of signal handlers" >&5
+if eval "test \"`echo '$''{'ac_cv_type_signal'+set}'`\" = set"; then
+  echo $ac_n "(cached) $ac_c" 1>&6
+else
+  cat > conftest.$ac_ext <<EOF
+#line 3338 "configure"
+#include "confdefs.h"
+#include <sys/types.h>
+#include <signal.h>
+#ifdef signal
+#undef signal
+#endif
+#ifdef __cplusplus
+extern "C" void (*signal (int, void (*)(int)))(int);
+#else
+void (*signal ()) ();
+#endif
+
+int main() {
+int i;
+; return 0; }
+EOF
+if { (eval echo configure:3355: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+  rm -rf conftest*
+  ac_cv_type_signal=void
+else
+  echo "configure: failed program was:" >&5
+  cat conftest.$ac_ext >&5
+  rm -rf conftest*
+  ac_cv_type_signal=int
+fi
+rm -f conftest*
+fi
+
+echo "$ac_t""$ac_cv_type_signal" 1>&6
+cat >> confdefs.h <<EOF
+#define RETSIGTYPE $ac_cv_type_signal
+EOF
+
+
+
+echo $ac_n "checking for executable suffix""... $ac_c" 1>&6
+echo "configure:3375: checking for executable suffix" >&5
+if eval "test \"`echo '$''{'am_cv_exeext'+set}'`\" = set"; then
+  echo $ac_n "(cached) $ac_c" 1>&6
+else
+  if test "$CYGWIN32" = yes; then
+am_cv_exeext=.exe
+else
+cat > am_c_test.c << 'EOF'
+int main() {
+/* Nothing needed here */
+}
+EOF
+${CC-cc} -o am_c_test $CFLAGS $CPPFLAGS $LDFLAGS am_c_test.c $LIBS 1>&5
+am_cv_exeext=`ls am_c_test.* | grep -v am_c_test.c | sed -e s/am_c_test//`
+rm -f am_c_test*
+fi
+
+test x"${am_cv_exeext}" = x && am_cv_exeext=no
+fi
+EXEEXT=""
+test x"${am_cv_exeext}" != xno && EXEEXT=${am_cv_exeext}
+echo "$ac_t""${am_cv_exeext}" 1>&6
+
+
+sim_link_files=
+sim_link_links=
+
+sim_link_links=tconfig.h
+if test -f ${srcdir}/tconfig.in
+then
+  sim_link_files=tconfig.in
+else
+  sim_link_files=../common/tconfig.in
+fi
+
+# targ-vals.def points to the libc macro description file.
+case "${target}" in
+*-*-*) TARG_VALS_DEF=../common/nltvals.def ;;
+esac
+sim_link_files="${sim_link_files} ${TARG_VALS_DEF}"
+sim_link_links="${sim_link_links} targ-vals.def"
+
+
+
+program_transform_name="s,^,${program_prefix}gx-,"
+target_alias="${target_alias}-gx"
+
+sim_link_files="${sim_link_files} m32r-sim.h ../../opcodes/m32r-opc.h"
+sim_link_links="${sim_link_links} cpu-sim.h cpu-opc.h"
+
+
+wire_endian="BIG_ENDIAN"
+default_endian=""
+# Check whether --enable-sim-endian or --disable-sim-endian was given.
+if test "${enable_sim_endian+set}" = set; then
+  enableval="$enable_sim_endian"
+  case "${enableval}" in
+  b*|B*) sim_endian="-DWITH_TARGET_BYTE_ORDER=BIG_ENDIAN";;
+  l*|L*) sim_endian="-DWITH_TARGET_BYTE_ORDER=LITTLE_ENDIAN";;
+  yes)	 if test x"$wire_endian" != x; then
+	   sim_endian="-DWITH_TARGET_BYTE_ORDER=${wire_endian}"
+	 else
+           if test x"$default_endian" != x; then
+	     sim_endian="-DWITH_TARGET_BYTE_ORDER=${default_endian}"
+	   else
+	     echo "No hard-wired endian for target $target" 1>&6
+	     sim_endian="-DWITH_TARGET_BYTE_ORDER=0"
+	   fi
+	 fi;;
+  no)	 if test x"$default_endian" != x; then
+	   sim_endian="-DWITH_DEFAULT_TARGET_BYTE_ORDER=${default_endian}"
+	 else
+	   if test x"$wire_endian" != x; then
+	     sim_endian="-DWITH_DEFAULT_TARGET_BYTE_ORDER=${wire_endian}"
+	   else
+	     echo "No default endian for target $target" 1>&6
+	     sim_endian="-DWITH_DEFAULT_TARGET_BYTE_ORDER=0"
+	   fi
+	 fi;;
+  *)	 { echo "configure: error: "Unknown value $enableval for --enable-sim-endian"" 1>&2; exit 1; }; sim_endian="";;
+esac
+if test x"$silent" != x"yes" && test x"$sim_endian" != x""; then
+  echo "Setting endian flags = $sim_endian" 6>&1
+fi
+else
+  if test x"$default_endian" != x; then
+  sim_endian="-DWITH_DEFAULT_TARGET_BYTE_ORDER=${default_endian}"
+else
+  if test x"$wire_endian" != x; then
+    sim_endian="-DWITH_TARGET_BYTE_ORDER=${wire_endian}"
+  else
+    sim_endian=
+  fi
+fi
+fi
+
+wire_alignment="NONSTRICT_ALIGNMENT"
+default_alignment=""
+
+# Check whether --enable-sim-alignment or --disable-sim-alignment was given.
+if test "${enable_sim_alignment+set}" = set; then
+  enableval="$enable_sim_alignment"
+  case "${enableval}" in
+  strict | STRICT)       sim_alignment="-DWITH_ALIGNMENT=STRICT_ALIGNMENT";;
+  nonstrict | NONSTRICT) sim_alignment="-DWITH_ALIGNMENT=NONSTRICT_ALIGNMENT";;
+  forced | FORCED)       sim_alignment="-DWITH_ALIGNMENT=FORCED_ALIGNMENT";;
+  yes) if test x"$wire_alignment" != x; then
+	 sim_alignment="-DWITH_ALIGNMENT=${wire_alignment}"
+       else
+         if test x"$default_alignment" != x; then
+           sim_alignment="-DWITH_ALIGNMENT=${default_alignment}"
+         else
+	   echo "No hard-wired alignment for target $target" 1>&6
+	   sim_alignment="-DWITH_ALIGNMENT=0"
+         fi
+       fi;;
+  no)  if test x"$default_alignment" != x; then
+	 sim_alignment="-DWITH_DEFAULT_ALIGNMENT=${default_alignment}"
+       else
+         if test x"$wire_alignment" != x; then
+	   sim_alignment="-DWITH_DEFAULT_ALIGNMENT=${wire_alignment}"
+         else
+           echo "No default alignment for target $target" 1>&6
+           sim_alignment="-DWITH_DEFAULT_ALIGNMENT=0"
+         fi
+       fi;;
+  *)   { echo "configure: error: "Unknown value $enableval passed to --enable-sim-alignment"" 1>&2; exit 1; }; sim_alignment="";;
+esac
+if test x"$silent" != x"yes" && test x"$sim_alignment" != x""; then
+  echo "Setting alignment flags = $sim_alignment" 6>&1
+fi
+else
+  if test x"$default_alignment" != x; then
+  sim_alignment="-DWITH_DEFAULT_ALIGNMENT=${default_alignment}"
+else
+  if test x"$wire_alignment" != x; then
+    sim_alignment="-DWITH_ALIGNMENT=${wire_alignment}"
+  else
+    sim_alignment=
+  fi
+fi
+fi
+
+
+# Check whether --enable-sim-hostendian or --disable-sim-hostendian was given.
+if test "${enable_sim_hostendian+set}" = set; then
+  enableval="$enable_sim_hostendian"
+  case "${enableval}" in
+  no)	 sim_hostendian="-DWITH_HOST_BYTE_ORDER=0";;
+  b*|B*) sim_hostendian="-DWITH_HOST_BYTE_ORDER=BIG_ENDIAN";;
+  l*|L*) sim_hostendian="-DWITH_HOST_BYTE_ORDER=LITTLE_ENDIAN";;
+  *)	 { echo "configure: error: "Unknown value $enableval for --enable-sim-hostendian"" 1>&2; exit 1; }; sim_hostendian="";;
+esac
+if test x"$silent" != x"yes" && test x"$sim_hostendian" != x""; then
+  echo "Setting hostendian flags = $sim_hostendian" 6>&1
+fi
+else
+  
+if test "x$cross_compiling" = "xno"; then
+  echo $ac_n "checking whether byte ordering is bigendian""... $ac_c" 1>&6
+echo "configure:3535: checking whether byte ordering is bigendian" >&5
+if eval "test \"`echo '$''{'ac_cv_c_bigendian'+set}'`\" = set"; then
+  echo $ac_n "(cached) $ac_c" 1>&6
+else
+  ac_cv_c_bigendian=unknown
+# See if sys/param.h defines the BYTE_ORDER macro.
+cat > conftest.$ac_ext <<EOF
+#line 3542 "configure"
+#include "confdefs.h"
+#include <sys/types.h>
+#include <sys/param.h>
+int main() {
+
+#if !BYTE_ORDER || !BIG_ENDIAN || !LITTLE_ENDIAN
+ bogus endian macros
+#endif
+; return 0; }
+EOF
+if { (eval echo configure:3553: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+  rm -rf conftest*
+  # It does; now see whether it defined to BIG_ENDIAN or not.
+cat > conftest.$ac_ext <<EOF
+#line 3557 "configure"
+#include "confdefs.h"
+#include <sys/types.h>
+#include <sys/param.h>
+int main() {
+
+#if BYTE_ORDER != BIG_ENDIAN
+ not big endian
+#endif
+; return 0; }
+EOF
+if { (eval echo configure:3568: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+  rm -rf conftest*
+  ac_cv_c_bigendian=yes
+else
+  echo "configure: failed program was:" >&5
+  cat conftest.$ac_ext >&5
+  rm -rf conftest*
+  ac_cv_c_bigendian=no
+fi
+rm -f conftest*
+else
+  echo "configure: failed program was:" >&5
+  cat conftest.$ac_ext >&5
+fi
+rm -f conftest*
+if test $ac_cv_c_bigendian = unknown; then
+if test "$cross_compiling" = yes; then
+    { echo "configure: error: can not run test program while cross compiling" 1>&2; exit 1; }
+else
+  cat > conftest.$ac_ext <<EOF
+#line 3588 "configure"
+#include "confdefs.h"
+main () {
+  /* Are we little or big endian?  From Harbison&Steele.  */
+  union
+  {
+    long l;
+    char c[sizeof (long)];
+  } u;
+  u.l = 1;
+  exit (u.c[sizeof (long) - 1] == 1);
+}
+EOF
+if { (eval echo configure:3601: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
+then
+  ac_cv_c_bigendian=no
+else
+  echo "configure: failed program was:" >&5
+  cat conftest.$ac_ext >&5
+  rm -fr conftest*
+  ac_cv_c_bigendian=yes
+fi
+rm -fr conftest*
+fi
+
+fi
+fi
+
+echo "$ac_t""$ac_cv_c_bigendian" 1>&6
+if test $ac_cv_c_bigendian = yes; then
+  cat >> confdefs.h <<\EOF
+#define WORDS_BIGENDIAN 1
+EOF
+
+fi
+
+  if test $ac_cv_c_bigendian = yes; then
+    sim_hostendian="-DWITH_HOST_BYTE_ORDER=BIG_ENDIAN"
+  else
+    sim_hostendian="-DWITH_HOST_BYTE_ORDER=LITTLE_ENDIAN"
+  fi
+else
+  sim_hostendian="-DWITH_HOST_BYTE_ORDER=0"
+fi
+fi
+
+
+default_sim_default_model="m32r/d"
+# Check whether --enable-sim-default-model or --disable-sim-default-model was given.
+if test "${enable_sim_default_model+set}" = set; then
+  enableval="$enable_sim_default_model"
+  case "${enableval}" in
+  yes|no) { echo "configure: error: "Missing argument to --enable-sim-default-model"" 1>&2; exit 1; };;
+  *)	sim_default_model="-DWITH_DEFAULT_MODEL='\"${enableval}\"'";;
+esac
+if test x"$silent" != x"yes" && test x"$sim_default_model" != x""; then
+  echo "Setting default model = $sim_default_model" 6>&1
+fi
+else
+  sim_default_model="-DWITH_DEFAULT_MODEL='\"${default_sim_default_model}\"'"
+fi
+
+
+
+# Check whether --enable-sim-environment or --disable-sim-environment was given.
+if test "${enable_sim_environment+set}" = set; then
+  enableval="$enable_sim_environment"
+  case "${enableval}" in
+  all | ALL)             sim_environment="-DWITH_ENVIRONMENT=ALL_ENVIRONMENT";;
+  user | USER)           sim_environment="-DWITH_ENVIRONMENT=USER_ENVIRONMENT";;
+  virtual | VIRTUAL)     sim_environment="-DWITH_ENVIRONMENT=VIRTUAL_ENVIRONMENT";;
+  operating | OPERATING) sim_environment="-DWITH_ENVIRONMENT=OPERATING_ENVIRONMENT";;
+  *)   { echo "configure: error: "Unknown value $enableval passed to --enable-sim-environment"" 1>&2; exit 1; };
+       sim_environment="";;
+esac
+if test x"$silent" != x"yes" && test x"$sim_environment" != x""; then
+  echo "Setting sim environment = $sim_environment" 6>&1
+fi
+else
+  sim_environment="-DWITH_ENVIRONMENT=ALL_ENVIRONMENT"
+fi
+
+
+echo $ac_n "checking for dlopen in -ldl""... $ac_c" 1>&6
+echo "configure:3672: checking for dlopen in -ldl" >&5
+ac_lib_var=`echo dl'_'dlopen | sed 'y%./+-%__p_%'`
+if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
+  echo $ac_n "(cached) $ac_c" 1>&6
+else
+  ac_save_LIBS="$LIBS"
+LIBS="-ldl  $LIBS"
+cat > conftest.$ac_ext <<EOF
+#line 3680 "configure"
+#include "confdefs.h"
+/* Override any gcc2 internal prototype to avoid an error.  */
+/* We use char because int might match the return type of a gcc2
+    builtin and then its argument prototype would still apply.  */
+char dlopen();
+
+int main() {
+dlopen()
+; return 0; }
+EOF
+if { (eval echo configure:3691: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+  rm -rf conftest*
+  eval "ac_cv_lib_$ac_lib_var=yes"
+else
+  echo "configure: failed program was:" >&5
+  cat conftest.$ac_ext >&5
+  rm -rf conftest*
+  eval "ac_cv_lib_$ac_lib_var=no"
+fi
+rm -f conftest*
+LIBS="$ac_save_LIBS"
+
+fi
+if eval "test \"`echo '$ac_cv_lib_'$ac_lib_var`\" = yes"; then
+  echo "$ac_t""yes" 1>&6
+    ac_tr_lib=HAVE_LIB`echo dl | sed -e 's/[^a-zA-Z0-9_]/_/g' \
+    -e 'y/abcdefghijklmnopqrstuvwxyz/ABCDEFGHIJKLMNOPQRSTUVWXYZ/'`
+  cat >> confdefs.h <<EOF
+#define $ac_tr_lib 1
+EOF
+
+  LIBS="-ldl $LIBS"
+
+else
+  echo "$ac_t""no" 1>&6
+fi
+
+
+
+
+trap '' 1 2 15
+cat > confcache <<\EOF
+# This file is a shell script that caches the results of configure
+# tests run on this system so they can be shared between configure
+# scripts and configure runs.  It is not useful on other systems.
+# If it contains results you don't want to keep, you may remove or edit it.
+#
+# By default, configure uses ./config.cache as the cache file,
+# creating it if it does not exist already.  You can give configure
+# the --cache-file=FILE option to use a different cache file; that is
+# what configure does when it calls configure scripts in
+# subdirectories, so they share the cache.
+# Giving --cache-file=/dev/null disables caching, for debugging configure.
+# config.status only pays attention to the cache file if you give it the
+# --recheck option to rerun configure.
+#
+EOF
+# The following way of writing the cache mishandles newlines in values,
+# but we know of no workaround that is simple, portable, and efficient.
+# So, don't put newlines in cache variables' values.
+# Ultrix sh set writes to stderr and can't be redirected directly,
+# and sets the high bit in the cache file unless we assign to the vars.
+(set) 2>&1 |
+  case `(ac_space=' '; set) 2>&1 | grep ac_space` in
+  *ac_space=\ *)
+    # `set' does not quote correctly, so add quotes (double-quote substitution
+    # turns \\\\ into \\, and sed turns \\ into \).
+    sed -n \
+      -e "s/'/'\\\\''/g" \
+      -e "s/^\\([a-zA-Z0-9_]*_cv_[a-zA-Z0-9_]*\\)=\\(.*\\)/\\1=\${\\1='\\2'}/p"
+    ;;
+  *)
+    # `set' quotes correctly as required by POSIX, so do not add quotes.
+    sed -n -e 's/^\([a-zA-Z0-9_]*_cv_[a-zA-Z0-9_]*\)=\(.*\)/\1=${\1=\2}/p'
+    ;;
+  esac >> confcache
+if cmp -s $cache_file confcache; then
+  :
+else
+  if test -w $cache_file; then
+    echo "updating cache $cache_file"
+    cat confcache > $cache_file
+  else
+    echo "not updating unwritable cache $cache_file"
+  fi
+fi
+rm -f confcache
+
+trap 'rm -fr conftest* confdefs* core core.* *.core $ac_clean_files; exit 1' 1 2 15
+
+test "x$prefix" = xNONE && prefix=$ac_default_prefix
+# Let make expand exec_prefix.
+test "x$exec_prefix" = xNONE && exec_prefix='${prefix}'
+
+# Any assignment to VPATH causes Sun make to only execute
+# the first set of double-colon rules, so remove it if not needed.
+# If there is a colon in the path, we need to keep it.
+if test "x$srcdir" = x.; then
+  ac_vpsub='/^[ 	]*VPATH[ 	]*=[^:]*$/d'
+fi
+
+trap 'rm -f $CONFIG_STATUS conftest*; exit 1' 1 2 15
+
+DEFS=-DHAVE_CONFIG_H
+
+# Without the "./", some shells look in PATH for config.status.
+: ${CONFIG_STATUS=./config.status}
+
+echo creating $CONFIG_STATUS
+rm -f $CONFIG_STATUS
+cat > $CONFIG_STATUS <<EOF
+#! /bin/sh
+# Generated automatically by configure.
+# Run this file to recreate the current configuration.
+# This directory was configured as follows,
+# on host `(hostname || uname -n) 2>/dev/null | sed 1q`:
+#
+# $0 $ac_configure_args
+#
+# Compiler output produced by configure, useful for debugging
+# configure, is in ./config.log if it exists.
+
+ac_cs_usage="Usage: $CONFIG_STATUS [--recheck] [--version] [--help]"
+for ac_option
+do
+  case "\$ac_option" in
+  -recheck | --recheck | --rechec | --reche | --rech | --rec | --re | --r)
+    echo "running \${CONFIG_SHELL-/bin/sh} $0 $ac_configure_args --no-create --no-recursion"
+    exec \${CONFIG_SHELL-/bin/sh} $0 $ac_configure_args --no-create --no-recursion ;;
+  -version | --version | --versio | --versi | --vers | --ver | --ve | --v)
+    echo "$CONFIG_STATUS generated by autoconf version 2.12.2"
+    exit 0 ;;
+  -help | --help | --hel | --he | --h)
+    echo "\$ac_cs_usage"; exit 0 ;;
+  *) echo "\$ac_cs_usage"; exit 1 ;;
+  esac
+done
+
+ac_given_srcdir=$srcdir
+ac_given_INSTALL="$INSTALL"
+
+trap 'rm -fr `echo "Makefile.sim:Makefile.in Make-common.sim:../common/Make-common.in .gdbinit:../common/gdbinit.in config.h:config.in" | sed "s/:[^ ]*//g"` conftest*; exit 1' 1 2 15
+EOF
+cat >> $CONFIG_STATUS <<EOF
+
+# Protect against being on the right side of a sed subst in config.status.
+sed 's/%@/@@/; s/@%/@@/; s/%g\$/@g/; /@g\$/s/[\\\\&%]/\\\\&/g;
+ s/@@/%@/; s/@@/@%/; s/@g\$/%g/' > conftest.subs <<\\CEOF
+$ac_vpsub
+$extrasub
+s%@sim_environment@%$sim_environment%g
+s%@sim_alignment@%$sim_alignment%g
+s%@sim_assert@%$sim_assert%g
+s%@sim_bitsize@%$sim_bitsize%g
+s%@sim_endian@%$sim_endian%g
+s%@sim_hostendian@%$sim_hostendian%g
+s%@sim_float@%$sim_float%g
+s%@sim_scache@%$sim_scache%g
+s%@sim_default_model@%$sim_default_model%g
+s%@sim_hw_cflags@%$sim_hw_cflags%g
+s%@sim_hw_objs@%$sim_hw_objs%g
+s%@sim_hw@%$sim_hw%g
+s%@sim_inline@%$sim_inline%g
+s%@sim_packages@%$sim_packages%g
+s%@sim_regparm@%$sim_regparm%g
+s%@sim_reserved_bits@%$sim_reserved_bits%g
+s%@sim_smp@%$sim_smp%g
+s%@sim_stdcall@%$sim_stdcall%g
+s%@sim_xor_endian@%$sim_xor_endian%g
+s%@build_warnings@%$build_warnings%g
+s%@SHELL@%$SHELL%g
+s%@CFLAGS@%$CFLAGS%g
+s%@CPPFLAGS@%$CPPFLAGS%g
+s%@CXXFLAGS@%$CXXFLAGS%g
+s%@DEFS@%$DEFS%g
+s%@LDFLAGS@%$LDFLAGS%g
+s%@LIBS@%$LIBS%g
+s%@exec_prefix@%$exec_prefix%g
+s%@prefix@%$prefix%g
+s%@program_transform_name@%$program_transform_name%g
+s%@bindir@%$bindir%g
+s%@sbindir@%$sbindir%g
+s%@libexecdir@%$libexecdir%g
+s%@datadir@%$datadir%g
+s%@sysconfdir@%$sysconfdir%g
+s%@sharedstatedir@%$sharedstatedir%g
+s%@localstatedir@%$localstatedir%g
+s%@libdir@%$libdir%g
+s%@includedir@%$includedir%g
+s%@oldincludedir@%$oldincludedir%g
+s%@infodir@%$infodir%g
+s%@mandir@%$mandir%g
+s%@host@%$host%g
+s%@host_alias@%$host_alias%g
+s%@host_cpu@%$host_cpu%g
+s%@host_vendor@%$host_vendor%g
+s%@host_os@%$host_os%g
+s%@target@%$target%g
+s%@target_alias@%$target_alias%g
+s%@target_cpu@%$target_cpu%g
+s%@target_vendor@%$target_vendor%g
+s%@target_os@%$target_os%g
+s%@build@%$build%g
+s%@build_alias@%$build_alias%g
+s%@build_cpu@%$build_cpu%g
+s%@build_vendor@%$build_vendor%g
+s%@build_os@%$build_os%g
+s%@CC@%$CC%g
+s%@INSTALL_PROGRAM@%$INSTALL_PROGRAM%g
+s%@INSTALL_DATA@%$INSTALL_DATA%g
+s%@CC_FOR_BUILD@%$CC_FOR_BUILD%g
+s%@HDEFINES@%$HDEFINES%g
+s%@AR@%$AR%g
+s%@RANLIB@%$RANLIB%g
+s%@SET_MAKE@%$SET_MAKE%g
+s%@CPP@%$CPP%g
+s%@ALLOCA@%$ALLOCA%g
+s%@USE_NLS@%$USE_NLS%g
+s%@MSGFMT@%$MSGFMT%g
+s%@GMSGFMT@%$GMSGFMT%g
+s%@XGETTEXT@%$XGETTEXT%g
+s%@USE_INCLUDED_LIBINTL@%$USE_INCLUDED_LIBINTL%g
+s%@CATALOGS@%$CATALOGS%g
+s%@CATOBJEXT@%$CATOBJEXT%g
+s%@DATADIRNAME@%$DATADIRNAME%g
+s%@GMOFILES@%$GMOFILES%g
+s%@INSTOBJEXT@%$INSTOBJEXT%g
+s%@INTLDEPS@%$INTLDEPS%g
+s%@INTLLIBS@%$INTLLIBS%g
+s%@INTLOBJS@%$INTLOBJS%g
+s%@POFILES@%$POFILES%g
+s%@POSUB@%$POSUB%g
+s%@INCLUDE_LOCALE_H@%$INCLUDE_LOCALE_H%g
+s%@GT_NO@%$GT_NO%g
+s%@GT_YES@%$GT_YES%g
+s%@MKINSTALLDIRS@%$MKINSTALLDIRS%g
+s%@l@%$l%g
+s%@MAINT@%$MAINT%g
+s%@sim_bswap@%$sim_bswap%g
+s%@sim_cflags@%$sim_cflags%g
+s%@sim_debug@%$sim_debug%g
+s%@sim_stdio@%$sim_stdio%g
+s%@sim_trace@%$sim_trace%g
+s%@sim_profile@%$sim_profile%g
+s%@EXEEXT@%$EXEEXT%g
+
+CEOF
+EOF
+
+cat >> $CONFIG_STATUS <<\EOF
+
+# Split the substitutions into bite-sized pieces for seds with
+# small command number limits, like on Digital OSF/1 and HP-UX.
+ac_max_sed_cmds=90 # Maximum number of lines to put in a sed script.
+ac_file=1 # Number of current file.
+ac_beg=1 # First line for current file.
+ac_end=$ac_max_sed_cmds # Line after last line for current file.
+ac_more_lines=:
+ac_sed_cmds=""
+while $ac_more_lines; do
+  if test $ac_beg -gt 1; then
+    sed "1,${ac_beg}d; ${ac_end}q" conftest.subs > conftest.s$ac_file
+  else
+    sed "${ac_end}q" conftest.subs > conftest.s$ac_file
+  fi
+  if test ! -s conftest.s$ac_file; then
+    ac_more_lines=false
+    rm -f conftest.s$ac_file
+  else
+    if test -z "$ac_sed_cmds"; then
+      ac_sed_cmds="sed -f conftest.s$ac_file"
+    else
+      ac_sed_cmds="$ac_sed_cmds | sed -f conftest.s$ac_file"
+    fi
+    ac_file=`expr $ac_file + 1`
+    ac_beg=$ac_end
+    ac_end=`expr $ac_end + $ac_max_sed_cmds`
+  fi
+done
+if test -z "$ac_sed_cmds"; then
+  ac_sed_cmds=cat
+fi
+EOF
+
+cat >> $CONFIG_STATUS <<EOF
+
+CONFIG_FILES=\${CONFIG_FILES-"Makefile.sim:Makefile.in Make-common.sim:../common/Make-common.in .gdbinit:../common/gdbinit.in"}
+EOF
+cat >> $CONFIG_STATUS <<\EOF
+for ac_file in .. $CONFIG_FILES; do if test "x$ac_file" != x..; then
+  # Support "outfile[:infile[:infile...]]", defaulting infile="outfile.in".
+  case "$ac_file" in
+  *:*) ac_file_in=`echo "$ac_file"|sed 's%[^:]*:%%'`
+       ac_file=`echo "$ac_file"|sed 's%:.*%%'` ;;
+  *) ac_file_in="${ac_file}.in" ;;
+  esac
+
+  # Adjust a relative srcdir, top_srcdir, and INSTALL for subdirectories.
+
+  # Remove last slash and all that follows it.  Not all systems have dirname.
+  ac_dir=`echo $ac_file|sed 's%/[^/][^/]*$%%'`
+  if test "$ac_dir" != "$ac_file" && test "$ac_dir" != .; then
+    # The file is in a subdirectory.
+    test ! -d "$ac_dir" && mkdir "$ac_dir"
+    ac_dir_suffix="/`echo $ac_dir|sed 's%^\./%%'`"
+    # A "../" for each directory in $ac_dir_suffix.
+    ac_dots=`echo $ac_dir_suffix|sed 's%/[^/]*%../%g'`
+  else
+    ac_dir_suffix= ac_dots=
+  fi
+
+  case "$ac_given_srcdir" in
+  .)  srcdir=.
+      if test -z "$ac_dots"; then top_srcdir=.
+      else top_srcdir=`echo $ac_dots|sed 's%/$%%'`; fi ;;
+  /*) srcdir="$ac_given_srcdir$ac_dir_suffix"; top_srcdir="$ac_given_srcdir" ;;
+  *) # Relative path.
+    srcdir="$ac_dots$ac_given_srcdir$ac_dir_suffix"
+    top_srcdir="$ac_dots$ac_given_srcdir" ;;
+  esac
+
+  case "$ac_given_INSTALL" in
+  [/$]*) INSTALL="$ac_given_INSTALL" ;;
+  *) INSTALL="$ac_dots$ac_given_INSTALL" ;;
+  esac
+
+  echo creating "$ac_file"
+  rm -f "$ac_file"
+  configure_input="Generated automatically from `echo $ac_file_in|sed 's%.*/%%'` by configure."
+  case "$ac_file" in
+  *Makefile*) ac_comsub="1i\\
+# $configure_input" ;;
+  *) ac_comsub= ;;
+  esac
+
+  ac_file_inputs=`echo $ac_file_in|sed -e "s%^%$ac_given_srcdir/%" -e "s%:% $ac_given_srcdir/%g"`
+  sed -e "$ac_comsub
+s%@configure_input@%$configure_input%g
+s%@srcdir@%$srcdir%g
+s%@top_srcdir@%$top_srcdir%g
+s%@INSTALL@%$INSTALL%g
+" $ac_file_inputs | (eval "$ac_sed_cmds") > $ac_file
+fi; done
+rm -f conftest.s*
+
+# These sed commands are passed to sed as "A NAME B NAME C VALUE D", where
+# NAME is the cpp macro being defined and VALUE is the value it is being given.
+#
+# ac_d sets the value in "#define NAME VALUE" lines.
+ac_dA='s%^\([ 	]*\)#\([ 	]*define[ 	][ 	]*\)'
+ac_dB='\([ 	][ 	]*\)[^ 	]*%\1#\2'
+ac_dC='\3'
+ac_dD='%g'
+# ac_u turns "#undef NAME" with trailing blanks into "#define NAME VALUE".
+ac_uA='s%^\([ 	]*\)#\([ 	]*\)undef\([ 	][ 	]*\)'
+ac_uB='\([ 	]\)%\1#\2define\3'
+ac_uC=' '
+ac_uD='\4%g'
+# ac_e turns "#undef NAME" without trailing blanks into "#define NAME VALUE".
+ac_eA='s%^\([ 	]*\)#\([ 	]*\)undef\([ 	][ 	]*\)'
+ac_eB='$%\1#\2define\3'
+ac_eC=' '
+ac_eD='%g'
+
+if test "${CONFIG_HEADERS+set}" != set; then
+EOF
+cat >> $CONFIG_STATUS <<EOF
+  CONFIG_HEADERS="config.h:config.in"
+EOF
+cat >> $CONFIG_STATUS <<\EOF
+fi
+for ac_file in .. $CONFIG_HEADERS; do if test "x$ac_file" != x..; then
+  # Support "outfile[:infile[:infile...]]", defaulting infile="outfile.in".
+  case "$ac_file" in
+  *:*) ac_file_in=`echo "$ac_file"|sed 's%[^:]*:%%'`
+       ac_file=`echo "$ac_file"|sed 's%:.*%%'` ;;
+  *) ac_file_in="${ac_file}.in" ;;
+  esac
+
+  echo creating $ac_file
+
+  rm -f conftest.frag conftest.in conftest.out
+  ac_file_inputs=`echo $ac_file_in|sed -e "s%^%$ac_given_srcdir/%" -e "s%:% $ac_given_srcdir/%g"`
+  cat $ac_file_inputs > conftest.in
+
+EOF
+
+# Transform confdefs.h into a sed script conftest.vals that substitutes
+# the proper values into config.h.in to produce config.h.  And first:
+# Protect against being on the right side of a sed subst in config.status.
+# Protect against being in an unquoted here document in config.status.
+rm -f conftest.vals
+cat > conftest.hdr <<\EOF
+s/[\\&%]/\\&/g
+s%[\\$`]%\\&%g
+s%#define \([A-Za-z_][A-Za-z0-9_]*\) *\(.*\)%${ac_dA}\1${ac_dB}\1${ac_dC}\2${ac_dD}%gp
+s%ac_d%ac_u%gp
+s%ac_u%ac_e%gp
+EOF
+sed -n -f conftest.hdr confdefs.h > conftest.vals
+rm -f conftest.hdr
+
+# This sed command replaces #undef with comments.  This is necessary, for
+# example, in the case of _POSIX_SOURCE, which is predefined and required
+# on some systems where configure will not decide to define it.
+cat >> conftest.vals <<\EOF
+s%^[ 	]*#[ 	]*undef[ 	][ 	]*[a-zA-Z_][a-zA-Z_0-9]*%/* & */%
+EOF
+
+# Break up conftest.vals because some shells have a limit on
+# the size of here documents, and old seds have small limits too.
+
+rm -f conftest.tail
+while :
+do
+  ac_lines=`grep -c . conftest.vals`
+  # grep -c gives empty output for an empty file on some AIX systems.
+  if test -z "$ac_lines" || test "$ac_lines" -eq 0; then break; fi
+  # Write a limited-size here document to conftest.frag.
+  echo '  cat > conftest.frag <<CEOF' >> $CONFIG_STATUS
+  sed ${ac_max_here_lines}q conftest.vals >> $CONFIG_STATUS
+  echo 'CEOF
+  sed -f conftest.frag conftest.in > conftest.out
+  rm -f conftest.in
+  mv conftest.out conftest.in
+' >> $CONFIG_STATUS
+  sed 1,${ac_max_here_lines}d conftest.vals > conftest.tail
+  rm -f conftest.vals
+  mv conftest.tail conftest.vals
+done
+rm -f conftest.vals
+
+cat >> $CONFIG_STATUS <<\EOF
+  rm -f conftest.frag conftest.h
+  echo "/* $ac_file.  Generated automatically by configure.  */" > conftest.h
+  cat conftest.in >> conftest.h
+  rm -f conftest.in
+  if cmp -s $ac_file conftest.h 2>/dev/null; then
+    echo "$ac_file is unchanged"
+    rm -f conftest.h
+  else
+    # Remove last slash and all that follows it.  Not all systems have dirname.
+      ac_dir=`echo $ac_file|sed 's%/[^/][^/]*$%%'`
+      if test "$ac_dir" != "$ac_file" && test "$ac_dir" != .; then
+      # The file is in a subdirectory.
+      test ! -d "$ac_dir" && mkdir "$ac_dir"
+    fi
+    rm -f $ac_file
+    mv conftest.h $ac_file
+  fi
+fi; done
+
+EOF
+
+cat >> $CONFIG_STATUS <<EOF
+ac_sources="$sim_link_files"
+ac_dests="$sim_link_links"
+EOF
+
+cat >> $CONFIG_STATUS <<\EOF
+srcdir=$ac_given_srcdir
+while test -n "$ac_sources"; do
+  set $ac_dests; ac_dest=$1; shift; ac_dests=$*
+  set $ac_sources; ac_source=$1; shift; ac_sources=$*
+
+  echo "linking $srcdir/$ac_source to $ac_dest"
+
+  if test ! -r $srcdir/$ac_source; then
+    { echo "configure: error: $srcdir/$ac_source: File not found" 1>&2; exit 1; }
+  fi
+  rm -f $ac_dest
+
+  # Make relative symlinks.
+  # Remove last slash and all that follows it.  Not all systems have dirname.
+  ac_dest_dir=`echo $ac_dest|sed 's%/[^/][^/]*$%%'`
+  if test "$ac_dest_dir" != "$ac_dest" && test "$ac_dest_dir" != .; then
+    # The dest file is in a subdirectory.
+    test ! -d "$ac_dest_dir" && mkdir "$ac_dest_dir"
+    ac_dest_dir_suffix="/`echo $ac_dest_dir|sed 's%^\./%%'`"
+    # A "../" for each directory in $ac_dest_dir_suffix.
+    ac_dots=`echo $ac_dest_dir_suffix|sed 's%/[^/]*%../%g'`
+  else
+    ac_dest_dir_suffix= ac_dots=
+  fi
+
+  case "$srcdir" in
+  [/$]*) ac_rel_source="$srcdir/$ac_source" ;;
+  *) ac_rel_source="$ac_dots$srcdir/$ac_source" ;;
+  esac
+
+  # Make a symlink if possible; otherwise try a hard link.
+  if ln -s $ac_rel_source $ac_dest 2>/dev/null ||
+    ln $srcdir/$ac_source $ac_dest; then :
+  else
+    { echo "configure: error: can not link $ac_dest to $srcdir/$ac_source" 1>&2; exit 1; }
+  fi
+done
+EOF
+cat >> $CONFIG_STATUS <<EOF
+
+EOF
+cat >> $CONFIG_STATUS <<\EOF
+case "x$CONFIG_FILES" in
+ xMakefile*)
+   echo "Merging Makefile.sim+Make-common.sim into Makefile ..."
+   rm -f Makesim1.tmp Makesim2.tmp Makefile
+   sed -n -e '/^## COMMON_PRE_/,/^## End COMMON_PRE_/ p' <Make-common.sim >Makesim1.tmp
+   sed -n -e '/^## COMMON_POST_/,/^## End COMMON_POST_/ p' <Make-common.sim >Makesim2.tmp
+   sed -e '/^## COMMON_PRE_/ r Makesim1.tmp' \
+	-e '/^## COMMON_POST_/ r Makesim2.tmp' \
+	<Makefile.sim >Makefile
+   rm -f Makefile.sim Make-common.sim Makesim1.tmp Makesim2.tmp
+   ;;
+ esac
+ case "x$CONFIG_HEADERS" in xconfig.h:config.in) echo > stamp-h ;; esac
+
+exit 0
+EOF
+chmod +x $CONFIG_STATUS
+rm -fr confdefs* $ac_clean_files
+test "$no_create" = yes || ${CONFIG_SHELL-/bin/sh} $CONFIG_STATUS || exit 1
+
+
+
+
+
diff --git a/sim/m32r-gx/configure.in b/sim/m32r-gx/configure.in
new file mode 100644
index 0000000..ce1851b
--- /dev/null
+++ b/sim/m32r-gx/configure.in
@@ -0,0 +1,26 @@
+dnl Process this file with autoconf to produce a configure script.
+sinclude(../common/aclocal.m4)
+AC_PREREQ(2.5)dnl
+AC_INIT(Makefile.in)
+
+
+SIM_AC_COMMON
+
+program_transform_name="s,^,${program_prefix}gx-,"
+target_alias="${target_alias}-gx"
+
+sim_link_files="${sim_link_files} m32r-sim.h ../../opcodes/m32r-opc.h"
+sim_link_links="${sim_link_links} cpu-sim.h cpu-opc.h"
+
+SIM_AC_OPTION_ENDIAN(BIG_ENDIAN)
+SIM_AC_OPTION_ALIGNMENT(NONSTRICT_ALIGNMENT)
+SIM_AC_OPTION_HOSTENDIAN
+SIM_AC_OPTION_DEFAULT_MODEL(m32r/d)
+SIM_AC_OPTION_ENVIRONMENT
+
+AC_CHECK_LIB(dl, dlopen)
+
+SIM_AC_OUTPUT
+
+
+
diff --git a/sim/m32r-gx/cpuall.h b/sim/m32r-gx/cpuall.h
new file mode 100644
index 0000000..11213e3
--- /dev/null
+++ b/sim/m32r-gx/cpuall.h
@@ -0,0 +1,2 @@
+#include "sim-cpu.h"
+#include "sim-model.h"
diff --git a/sim/m32r-gx/gx-translate.c b/sim/m32r-gx/gx-translate.c
new file mode 100644
index 0000000..0a43477
--- /dev/null
+++ b/sim/m32r-gx/gx-translate.c
@@ -0,0 +1,1038 @@
+/* GX M32R implementation.
+   Copyright (C) 1998 Cygnus Solutions.
+*/
+
+#include <stdio.h>
+#include <time.h>
+#include <stdlib.h>
+
+/* common simulator framework */
+#include "sim-main.h"
+#include "sim-base.h"
+#include "sim-core.h"
+#include "sim-gx.h"
+#include "sim-assert.h"
+#include "targ-vals.h"
+
+
+/* internal functions */
+void m32r_emit_long_insn(sim_gx_block* block, PCADDR pc, unsigned insn, int optimized);
+void m32r_emit_short_insn(sim_gx_block* block, PCADDR pc, unsigned insn, int optimized);
+
+/* callback functions */
+unsigned m32r_gx_load(unsigned pc, unsigned addr);
+void m32r_gx_store(unsigned pc, unsigned addr, unsigned data);
+signed char m32r_gx_load1(unsigned pc, unsigned addr);
+void m32r_gx_store1(unsigned pc, unsigned addr, signed char data);
+signed short m32r_gx_load2(unsigned pc, unsigned addr);
+void m32r_gx_store2(unsigned pc, unsigned addr, signed short data);
+void m32r_gx_syscall(tgx_syscall_data* data);
+
+
+
+/* external functions */
+
+void
+tgx_block_ctor(sim_gx_block* block, sim_cia cia)
+{
+  /* pick translation boundaries */
+  unsigned_4 origin, length, divisor;
+
+#define GX_PAGE_SIZE 4096
+  origin = (cia / GX_PAGE_SIZE) * GX_PAGE_SIZE;
+  length = GX_PAGE_SIZE;
+
+  /* fill in general target-dependent fields */
+  divisor = 4; /* m32r instruction-pairs occur on word boundaries */
+
+  tgx_block_ctor2(block, origin, length, divisor);
+}
+
+
+void
+tgx_block_ctor2(sim_gx_block* block, unsigned_4 origin,
+		unsigned_4 length, unsigned_4 divisor)
+{
+  block->origin = origin;
+  block->length = length;
+  block->divisor = divisor;
+
+  /* allocate pc_flags array */
+  block->pc_flags = zalloc(block->length / block->divisor);
+
+  /* allocate tgx_callbacks */
+  block->callbacks = zalloc(sizeof(tgx_callbacks));
+  block->callbacks->load = m32r_gx_load;
+  block->callbacks->store = m32r_gx_store;
+  block->callbacks->load1 = m32r_gx_load1;
+  block->callbacks->store1 = m32r_gx_store1;
+  block->callbacks->load2 = m32r_gx_load2;
+  block->callbacks->store2 = m32r_gx_store2;
+  block->callbacks->syscall = m32r_gx_syscall;
+}
+
+
+
+void
+tgx_emit_pre_function(sim_gx_block* gx, int optimized)
+{
+  sim_gx_compiled_block* block = optimized ? gx->optimized_block : gx->learning_block;
+  ASSERT(block->source_file != NULL);
+
+  fprintf(block->source_file, "\n");
+  fprintf(block->source_file, "#include <stdio.h>\n");
+  fprintf(block->source_file, "\n");
+  fprintf(block->source_file, /* match with definition in sim-main.h! */
+	  "typedef struct tgx_cpu_regs\n"
+	  "{\n"
+	  "  unsigned int h_pc;  /* program counter */\n"
+	  "  signed int h_gr[16];  /* general registers */\n"
+	  "  unsigned int h_cr[16];  /* control registers */\n"
+	  "  long long h_accum;  /* accumulator */\n"
+	  "  unsigned h_lock;  /* lock */\n"
+	  "} tgx_cpu_regs;\n");
+
+  fprintf(block->source_file, /* match with definition in sim-main.h! */
+	  "typedef struct tgx_syscall_data\n"
+	  "{\n"
+	  "  unsigned pc;\n"
+	  "  unsigned func;\n"
+	  "  unsigned arg1;\n"
+	  "  unsigned arg2;\n"
+	  "  unsigned arg3;\n"
+	  "  unsigned errcode;\n"
+	  "  unsigned result;\n"
+	  "  unsigned result2;\n"
+	  "} tgx_syscall_data;\n");
+
+  fprintf(block->source_file, /* match with definition in sim-main.h! */
+	  "typedef struct tgx_callbacks\n"
+	  "{\n"
+	  "  unsigned (*load)(unsigned pc, unsigned addr);\n"
+	  "  void (*store)(unsigned pc, unsigned addr, unsigned data);\n"
+	  "  signed char (*load1)(unsigned pc, unsigned addr);\n"
+	  "  void (*store1)(unsigned pc, unsigned addr, signed char data);\n"
+	  "  signed short (*load2)(unsigned pc, unsigned addr);\n"
+	  "  void (*store2)(unsigned pc, unsigned addr, signed short data);\n"
+	  "  void (*syscall)(tgx_syscall_data* data);\n"
+	  "} tgx_callbacks;\n");
+}
+
+
+void
+tgx_emit_load_block(sim_gx_block* gx, int optimized)
+{
+  sim_gx_compiled_block* block =
+    optimized ? gx->optimized_block : gx->learning_block;
+
+  ASSERT(block->source_file != NULL);
+  fprintf(block->source_file, /* match with definition above */
+	  "  unsigned int pc = regs->h_pc;\n"
+	  "  unsigned int npc = pc;\n"
+	  "  signed int temp;\n"
+	  "  signed int gr0 = regs->h_gr[0], gr1 = regs->h_gr[1];\n"
+	  "  signed int gr2 = regs->h_gr[2], gr3 = regs->h_gr[3];\n"
+	  "  signed int gr4 = regs->h_gr[4], gr5 = regs->h_gr[5];\n"
+	  "  signed int gr6 = regs->h_gr[6], gr7 = regs->h_gr[7];\n"
+	  "  signed int gr8 = regs->h_gr[8], gr9 = regs->h_gr[9];\n"
+	  "  signed int gr10 = regs->h_gr[10], gr11 = regs->h_gr[11];\n"
+	  "  signed int gr12 = regs->h_gr[12], gr13 = regs->h_gr[13];\n"
+	  "  signed int gr14 = regs->h_gr[14];\n"
+	  "  unsigned int cr0 = regs->h_cr[0], cr1 = regs->h_cr[1];\n"
+	  "  unsigned int cr2 = regs->h_cr[2], cr3 = regs->h_cr[3];\n"
+	  "  unsigned int cr4 = regs->h_cr[4], cr5 = regs->h_cr[5];\n"
+	  "  unsigned int cr6 = regs->h_cr[6], cr7 = regs->h_cr[7];\n"
+	  "  unsigned int cr8 = regs->h_cr[8], cr9 = regs->h_cr[9];\n"
+	  "  unsigned int cr10 = regs->h_cr[10], cr11 = regs->h_cr[11];\n"
+	  "  unsigned int cr12 = regs->h_cr[12], cr13 = regs->h_cr[13];\n"
+	  "  unsigned int cr14 = regs->h_cr[14], cr15 = regs->h_cr[15];\n"
+	  "  long long accum = regs->h_accum;\n"
+	  "  unsigned cond = cr0 & 0x01;\n"
+	  "  unsigned sm = cr0 & 0x80;\n"
+ 	  "  unsigned int gr15 = sm ? cr3 : cr2;\n"
+          "  unsigned lock = regs->h_lock;\n");
+}
+
+
+
+sim_cia
+tgx_emit_insn(sim_gx_block* gx, sim_cia cia, int optimized)
+{
+  PCADDR pc = cia;
+  SIM_DESC sd = CURRENT_STATE;
+  sim_cpu* cpu = STATE_CPU (sd, 0);
+  USI insn = sim_core_read_unaligned_4 (cpu, NULL_CIA, exec_map, cia);
+  USI insn1 = (insn >> 16) & 0xffff;
+  USI insn2 = insn & 0xffff;
+  sim_gx_compiled_block* block =
+    optimized ? gx->optimized_block : gx->learning_block;
+  
+  ASSERT(block->source_file != NULL);
+
+  /* classify instruction word */
+  if (insn & 0x80000000) /* single long word */
+    m32r_emit_long_insn(gx, pc, insn, optimized);
+  else /* two sequential half words */
+    {
+      /* translate first instruction */
+      m32r_emit_short_insn(gx, pc, insn1, optimized);
+
+      if(insn2 & 0x8000) /* parallel? */
+	{
+	  fprintf(block->source_file, "      /* || */\n");
+	  insn2 &= 0x7fff;
+	  /* XXX: genuine parallelism handling */
+	}
+      else
+	fprintf(block->source_file, "      /* -> */\n");
+      
+      /* translate second instruction */
+      m32r_emit_short_insn(gx, pc + 2, insn2, optimized);
+    }
+
+  return cia + 4; /* next instruction pair */
+}
+
+
+void
+tgx_emit_save_block(sim_gx_block* gx, int optimized)
+{
+  sim_gx_compiled_block* block =
+    optimized ? gx->optimized_block : gx->learning_block;
+
+  ASSERT(block->source_file != NULL);
+  fprintf(block->source_file, /* match with definition above */
+	  "  cr0 = (cr0 & 0x00c140) | (sm ? 0x80 : 0 ) | (cond ? 1 : 0);\n"
+	  "  cr1 = cond ? 1 : 0;\n"
+	  "  cr2 = sm ? cr2 : gr15;\n"
+	  "  cr3 = sm ? gr15 : cr3;\n"
+	  "  regs->h_pc = npc;\n"
+	  "  regs->h_gr[0] = gr0, regs->h_gr[1] = gr1;\n"
+	  "  regs->h_gr[2] = gr2, regs->h_gr[3] = gr3;\n"
+	  "  regs->h_gr[4] = gr4, regs->h_gr[5] = gr5;\n"
+	  "  regs->h_gr[6] = gr6, regs->h_gr[7] = gr7;\n"
+	  "  regs->h_gr[8] = gr8, regs->h_gr[9] = gr9;\n"
+	  "  regs->h_gr[10] = gr10, regs->h_gr[11] = gr11;\n"
+	  "  regs->h_gr[12] = gr12, regs->h_gr[13] = gr13;\n"
+	  "  regs->h_gr[14] = gr14, regs->h_gr[15] = gr15;\n"
+	  "  regs->h_cr[0] = cr0, regs->h_cr[1] = cr1;\n"
+	  "  regs->h_cr[2] = cr2, regs->h_cr[3] = cr3;\n"
+	  "  regs->h_cr[4] = cr4, regs->h_cr[5] = cr5;\n"
+	  "  regs->h_cr[6] = cr6, regs->h_cr[7] = cr7;\n"
+	  "  regs->h_cr[8] = cr8, regs->h_cr[9] = cr9;\n"
+	  "  regs->h_cr[10] = cr10, regs->h_cr[11] = cr11;\n"
+	  "  regs->h_cr[12] = cr12, regs->h_cr[13] = cr13;\n"
+	  "  regs->h_cr[14] = cr14, regs->h_cr[15] = cr15;\n"
+	  "  regs->h_accum = accum;\n"
+	  "  regs->h_lock = lock;\n");
+}
+
+
+void
+tgx_emit_post_function(sim_gx_block* gx, int optimized)
+{
+  sim_gx_compiled_block* block =
+    optimized ? gx->optimized_block : gx->learning_block;
+
+  ASSERT(block->source_file != NULL);
+  fprintf(block->source_file, "\n/* end of file */\n");
+}
+
+
+void
+tgx_block_dtor(sim_gx_block* block)
+{
+}
+
+
+
+int
+tgx_optimize_test(sim_gx_block* block)
+{
+  unsigned_4 current_time = time(NULL);
+  unsigned_4 constant_time = current_time - block->learn_last_change;
+  int opt;
+
+  /* try another optimize run if the system has settled down */
+  opt = (block->compile_time != 0
+	 && block->learn_last_change != 0
+	 && constant_time > block->compile_time);
+
+  /*
+  if(opt)
+    printf("optimize_test: now: %d, chg: %d, comp: %d, count: %d => opt %d\n",
+	   current_time, block->learn_last_change, block->compile_time,
+	   block->opt_compile_count, opt);
+ 
+  */
+
+  return opt;
+}
+
+
+unsigned
+m32r_gx_load(unsigned pc, unsigned addr)
+{
+  SIM_DESC sd = CURRENT_STATE;
+  sim_cpu* cpu = STATE_CPU (sd, 0);
+
+  USI data = sim_core_read_unaligned_4 (cpu, pc, read_map, addr);
+  return data;
+}
+
+
+void
+m32r_gx_store(unsigned pc, unsigned addr, unsigned data)
+{
+  SIM_DESC sd = CURRENT_STATE;
+  sim_cpu* cpu = STATE_CPU (sd, 0);
+
+  sim_core_write_unaligned_4 (cpu, pc, write_map, addr, data);
+}
+
+
+signed char
+m32r_gx_load1(unsigned pc, unsigned addr)
+{
+  SIM_DESC sd = CURRENT_STATE;
+  sim_cpu* cpu = STATE_CPU (sd, 0);
+
+  signed char data = sim_core_read_unaligned_1 (cpu, pc, read_map, addr);
+  return data;
+}
+
+
+void
+m32r_gx_store1(unsigned pc, unsigned addr, signed char data)
+{
+  SIM_DESC sd = CURRENT_STATE;
+  sim_cpu* cpu = STATE_CPU (sd, 0);
+
+  sim_core_write_unaligned_1 (cpu, pc, write_map, addr, data);
+}
+
+
+signed short
+m32r_gx_load2(unsigned pc, unsigned addr)
+{
+  SIM_DESC sd = CURRENT_STATE;
+  sim_cpu* cpu = STATE_CPU (sd, 0);
+
+  signed short data = sim_core_read_unaligned_2 (cpu, pc, read_map, addr);
+  return data;
+}
+
+
+void
+m32r_gx_store2(unsigned pc, unsigned addr, signed short data)
+{
+  SIM_DESC sd = CURRENT_STATE;
+  sim_cpu* cpu = STATE_CPU (sd, 0);
+
+  sim_core_write_unaligned_2 (cpu, pc, write_map, addr, data);
+}
+
+
+static int
+syscall_read_mem (host_callback *cb, struct cb_syscall *sc,
+                  unsigned long taddr, char *buf, int bytes)
+{
+  SIM_DESC sd = (SIM_DESC) sc->p1;
+  SIM_CPU *cpu = (SIM_CPU *) sc->p2;
+
+  return sim_core_read_buffer (sd, cpu, read_map, buf, taddr, bytes);
+}
+
+
+static int
+syscall_write_mem (host_callback *cb, struct cb_syscall *sc,
+                   unsigned long taddr, const char *buf, int bytes)
+{
+  SIM_DESC sd = (SIM_DESC) sc->p1;
+  SIM_CPU *cpu = (SIM_CPU *) sc->p2;
+
+  return sim_core_write_buffer (sd, cpu, write_map, buf, taddr, bytes);
+}
+
+
+void
+m32r_gx_syscall(tgx_syscall_data* data)
+{
+  SIM_DESC sd = CURRENT_STATE;
+  sim_cpu* cpu = STATE_CPU (sd, 0);
+  host_callback *cb = STATE_CALLBACK (sd);
+  CB_SYSCALL s;
+
+  CB_SYSCALL_INIT (&s);
+  s.func = data->func;
+  s.arg1 = data->arg1;
+  s.arg2 = data->arg2;
+  s.arg3 = data->arg3;
+  
+  if (s.func == TARGET_SYS_exit)
+    {
+      sim_engine_halt (sd, cpu, NULL, data->pc, sim_exited, s.arg1);
+      exit(s.arg1);
+    }
+  
+  s.p1 = (PTR) sd;
+  s.p2 = (PTR) cpu;
+  s.read_mem = syscall_read_mem;
+  s.write_mem = syscall_write_mem;
+  cb_syscall (cb, &s);
+
+  data->errcode = s.errcode;
+  data->result = s.result;
+  data->result2 = s.result2;
+}
+
+
+
+void
+m32r_emit_long_insn(sim_gx_block* gx, PCADDR pc, unsigned insn, int optimized)
+{
+  int op1  = (insn & 0xf0000000) >> 28;
+  int r1   = (insn & 0x0f000000) >> 24;
+  int op2  = (insn & 0x00f00000) >> 20;
+  int r2   = (insn & 0x000f0000) >> 16;
+  short lit2 = (insn & 0x0000ffff);
+  int lit3 = (insn & 0x00ffffff);
+  sim_gx_compiled_block* block = optimized ? gx->optimized_block : gx->learning_block;
+  FILE* f  = block->source_file;
+
+  ASSERT(block->source_file != NULL);
+
+  if(op1 == 0x8 && op2 == 0x4 && r1 == 0)
+    {
+      fprintf(f, "      /* CMPI R%d,#%d */\n", r2, lit2);
+      fprintf(f, "      cond = (gr%d < %d);\n", r2, lit2);
+    }
+  else if(op1 == 0x8 && op2 == 0x5 && r1 == 0)
+    {
+      fprintf(f, "      /* CMPUI R%d,#%d */\n", r2, lit2);
+      fprintf(f, "      cond = ((unsigned) gr%d < %u);\n", r2, (unsigned)((int) lit2));
+    }
+  else if(op1 == 0x8 && op2 == 0x8)
+    {
+      fprintf(f, "      /* ADDV3 R%d,R%d,#%d */\n", r1, r2, lit2);
+      fprintf(f, "      temp = gr%d + %d;\n", r2, lit2);
+      fprintf(f, "      cond = (~(gr%d & %d) & (gr%d ^ temp)) & (1<<31);\n", r2, lit2, r2);
+      fprintf(f, "      gr%d = temp;\n", r1);
+    }
+  else if(op1 == 0x8 && op2 == 0xa)
+    {
+      fprintf(f, "      /* ADD3 R%d,R%d,#%d */\n", r1, r2, lit2);
+      fprintf(f, "      gr%d = gr%d + %d;\n", r1, r2, lit2);
+    }
+  else if(op1 == 0x8 && op2 == 0xc)
+    {
+      fprintf(f, "      /* AND3 R%d,R%d,#%u */\n", r1, r2, (unsigned short) lit2);
+      fprintf(f, "      gr%d = gr%d & %u;\n", r1, r2, (unsigned short) lit2);
+    }
+  else if(op1 == 0x8 && op2 == 0xd)
+    {
+      fprintf(f, "      /* XOR3 R%d,R%d,#%d */\n", r1, r2, lit2);
+      fprintf(f, "      gr%d = gr%d ^ %d;\n", r1, r2, lit2);
+    }
+  else if(op1 == 0x8 && op2 == 0xe)
+    {
+      fprintf(f, "      /* OR3 R%d,R%d,#%u */\n", r1, r2, (unsigned short) lit2);
+      fprintf(f, "      gr%d = gr%d | %u;\n", r1, r2, (unsigned short) lit2);
+    }
+
+  else if(op1 == 0x9 && op2 == 0x0 && lit2 == 0)
+    {
+      fprintf(f, "      /* DIV R%d,R%d */\n", r1, r2);
+      fprintf(f, "      if(gr%d != 0)\n", r2);
+      fprintf(f, "        gr%d = gr%d / gr%d;\n", r1, r1, r2);
+    }
+  else if(op1 == 0x9 && op2 == 0x1 && lit2 == 0)
+    {
+      fprintf(f, "      /* DIVU R%d,R%d */\n", r1, r2);
+      fprintf(f, "      if(gr%d != 0)\n", r2);
+      fprintf(f, "        gr%d = (unsigned) gr%d / (unsigned) gr%d;\n", r1, r1, r2);
+    }
+  else if(op1 == 0x9 && op2 == 0x2 && lit2 == 0)
+    {
+      fprintf(f, "      /* REM R%d,R%d */\n", r1, r2);
+      fprintf(f, "      if(gr%d != 0)\n", r2);
+      fprintf(f, "        gr%d = gr%d %% gr%d;\n", r1, r1, r2);
+    }
+  else if(op1 == 0x9 && op2 == 0x3 && lit2 == 0)
+    {
+      fprintf(f, "      /* REMU R%d,R%d */\n", r1, r2);
+      fprintf(f, "      if(gr%d != 0)\n", r2);
+      fprintf(f, "        gr%d = (unsigned) gr%d %% (unsigned) gr%d;\n", r1, r1, r2);
+    }
+  else if(op1 == 0x9 && op2 == 0x8)
+    {
+      fprintf(f, "      /* SRL3 R%d,R%d,#%d */\n", r1, r2, lit2);
+      fprintf(f, "      gr%d = (unsigned) gr%d >> %d;\n", r1, r2, (lit2 & 0x1f));
+    }
+  else if(op1 == 0x9 && op2 == 0xa)
+    {
+      fprintf(f, "      /* SRA3 R%d,R%d,#%d */\n", r1, r2, lit2);
+      fprintf(f, "      gr%d = gr%d >> %d;\n", r1, r2, (lit2 & 0x1f));
+    }
+  else if(op1 == 0x9 && op2 == 0xc)
+    {
+      fprintf(f, "      /* SLL3 R%d,R%d,#%d */\n", r1, r2, lit2);
+      fprintf(f, "      gr%d = gr%d << %d;\n", r1, r2, (lit2 & 0x1f));
+    }
+  else if(op1 == 0x9 && op2 == 0xf && r2 == 0)
+    {
+      fprintf(f, "      /* LDI R%d,#%d */\n", r1, lit2);
+      fprintf(f, "      gr%d = %d;\n", r1, lit2);
+    }
+
+  else if(op1 == 0xa && op2 == 0x0)
+    {
+      fprintf(f, "      /* STB R%d,@(%d,R%d) */\n", r1, lit2, r2);
+      fprintf(f, "      (*(callbacks->store1))(0x%08x, gr%d + %d, gr%d & 0xff);\n", (unsigned)pc, r2, lit2, r1);
+    }
+  else if(op1 == 0xa && op2 == 0x2)
+    {
+      fprintf(f, "      /* STH R%d,@(%d,R%d) */\n", r1, lit2, r2);
+      fprintf(f, "      (*(callbacks->store2))(0x%08x, gr%d + %d, gr%d & 0xffff);\n", (unsigned)pc, r2, lit2, r1);
+    }
+  else if(op1 == 0xa && op2 == 0x4)
+    {
+      fprintf(f, "      /* ST R%d,@(%d,R%d) */\n", r1, lit2, r2);
+      fprintf(f, "      (*(callbacks->store))(0x%08x, gr%d + %d, gr%d);\n", (unsigned)pc, r2, lit2, r1);
+    }
+  else if(op1 == 0xa && op2 == 0x8)
+    {
+      fprintf(f, "      /* LDB R%d,@(%d,R%d) */\n", r1, lit2, r2);
+      fprintf(f, "      gr%d = (*(callbacks->load1))(0x%08x, gr%d + %d);\n", r1, (unsigned)pc, r2, lit2);
+    }
+  else if(op1 == 0xa && op2 == 0x9)
+    {
+      fprintf(f, "      /* LDUB R%d,@(%d,R%d) */\n", r1, lit2, r2);
+      fprintf(f, "      gr%d = (unsigned char)(*(callbacks->load1))(0x%08x, gr%d + %d);\n", r1, (unsigned)pc, r2, lit2);
+    }
+  else if(op1 == 0xa && op2 == 0xa)
+    {
+      fprintf(f, "      /* LDH R%d,@(%d,R%d) */\n", r1, lit2, r2);
+      fprintf(f, "      gr%d = (*(callbacks->load2))(0x%08x, gr%d + %d);\n", r1, (unsigned)pc, r2, lit2);
+    }
+  else if(op1 == 0xa && op2 == 0xb)
+    {
+      fprintf(f, "      /* LDUH R%d,@(%d,R%d) */\n", r1, lit2, r2);
+      fprintf(f, "      gr%d = (unsigned short)(*(callbacks->load2))(0x%08x, gr%d + %d);\n", r1, (unsigned)pc, r2, lit2);
+    }
+  else if(op1 == 0xa && op2 == 0xc)
+    {
+      fprintf(f, "      /* LD R%d,@(%d,R%d) */\n", r1, lit2, r2);
+      fprintf(f, "      gr%d = (*(callbacks->load))(0x%08x, gr%d + %d);\n", r1, (unsigned)pc, r2, lit2);
+    }
+
+  else if(op1 == 0xb && op2 == 0x0)
+    {
+      unsigned newpc = (pc & 0xfffffffc) + (((int) lit2) << 2);
+      fprintf(f, "      /* BEQ R%d,R%d,%d */\n", r1, r2, lit2);
+      fprintf(f, "      if (gr%d == gr%d)\n", r1, r2);
+      fprintf(f, "        {\n");
+      fprintf(f, "          npc = 0x%08x;\n", newpc);
+      fprintf(f, "          goto %s;\n", (GX_PC_INCLUDES(gx,newpc)) ? "shortjump" : "longjump");
+      fprintf(f, "        }\n");
+    }
+  else if(op1 == 0xb && op2 == 0x1)
+    {
+      unsigned newpc = (pc & 0xfffffffc) + (((int) lit2) << 2);
+      fprintf(f, "      /* BNE R%d,R%d,%d */\n", r1, r2, lit2);
+      fprintf(f, "      if (gr%d != gr%d)\n", r1, r2);
+      fprintf(f, "        {\n");
+      fprintf(f, "          npc = 0x%08x;\n", newpc);
+      fprintf(f, "          goto %s;\n", (GX_PC_INCLUDES(gx,newpc)) ? "shortjump" : "longjump");
+      fprintf(f, "        }\n");
+    }
+  else if(op1 == 0xb && op2 == 0x8 && r1 == 0)
+    {
+      unsigned newpc = (pc & 0xfffffffc) + (((int) lit2) << 2);
+      fprintf(f, "      /* BEQZ R%d,%d */\n", r2, lit2);
+      fprintf(f, "      if (gr%d == 0)\n", r2);
+      fprintf(f, "        {\n");
+      fprintf(f, "          npc = 0x%08x;\n", newpc);
+      fprintf(f, "          goto %s;\n", (GX_PC_INCLUDES(gx,newpc)) ? "shortjump" : "longjump");
+      fprintf(f, "        }\n");
+    }
+  else if(op1 == 0xb && op2 == 0x9 && r1 == 0)
+    {
+      unsigned newpc = (pc & 0xfffffffc) + (((int) lit2) << 2);
+      fprintf(f, "      /* BNEZ R%d,%d */\n", r2, lit2);
+      fprintf(f, "      if (gr%d != 0)\n", r2);
+      fprintf(f, "        {\n");
+      fprintf(f, "          npc = 0x%08x;\n", newpc);
+      fprintf(f, "          goto %s;\n", (GX_PC_INCLUDES(gx,newpc)) ? "shortjump" : "longjump");
+      fprintf(f, "        }\n");
+    }
+  else if(op1 == 0xb && op2 == 0xa && r1 == 0x0)
+    {
+      unsigned newpc = (pc & 0xfffffffc) + (((int) lit2) << 2);
+      fprintf(f, "      /* BLTZ R%d,%d */\n", r2, lit2);
+      fprintf(f, "      if (gr%d < 0)\n", r2);
+      fprintf(f, "        {\n");
+      fprintf(f, "          npc = 0x%08x;\n", newpc);
+      fprintf(f, "          goto %s;\n", (GX_PC_INCLUDES(gx,newpc)) ? "shortjump" : "longjump");
+      fprintf(f, "        }\n");
+    }
+  else if(op1 == 0xb && op2 == 0xb && r1 == 0x0)
+    {
+      unsigned newpc = (pc & 0xfffffffc) + (((int) lit2) << 2);
+      fprintf(f, "      /* BGEZ R%d,%d */\n", r2, lit2);
+      fprintf(f, "      if (gr%d >= 0)\n", r2);
+      fprintf(f, "        {\n");
+      fprintf(f, "          npc = 0x%08x;\n", newpc);
+      fprintf(f, "          goto %s;\n", (GX_PC_INCLUDES(gx,newpc)) ? "shortjump" : "longjump");
+      fprintf(f, "        }\n");
+    }
+  else if(op1 == 0xb && op2 == 0xc && r1 == 0x0)
+    {
+      unsigned newpc = (pc & 0xfffffffc) + (((int) lit2) << 2);
+      fprintf(f, "      /* BLEZ R%d,%d */\n", r2, lit2);
+      fprintf(f, "      if (gr%d <= 0)\n", r2);
+      fprintf(f, "        {\n");
+      fprintf(f, "          npc = 0x%08x;\n", newpc);
+      fprintf(f, "          goto %s;\n", (GX_PC_INCLUDES(gx,newpc)) ? "shortjump" : "longjump");
+      fprintf(f, "        }\n");
+    }
+  else if(op1 == 0xb && op2 == 0xd && r1 == 0x0)
+    {
+      unsigned newpc = (pc & 0xfffffffc) + (((int) lit2) << 2);
+      fprintf(f, "      /* BGTZ R%d,%d */\n", r2, lit2);
+      fprintf(f, "      if (gr%d > 0)\n", r2);
+      fprintf(f, "        {\n");
+      fprintf(f, "          npc = 0x%08x;\n", newpc);
+      fprintf(f, "          goto %s;\n", (GX_PC_INCLUDES(gx,newpc)) ? "shortjump" : "longjump");
+      fprintf(f, "        }\n");
+    }
+
+  else if(op1 == 0xd && op2 == 0xc && r2 == 0)
+    {
+      fprintf(f, "      /* SETH R%d,#%d */\n", r1, lit2);
+      fprintf(f, "      gr%d = 0x%08x;\n", r1, (lit2 << 16));
+    }
+
+  else if(op1 == 0xe)
+    {
+      fprintf(f, "      /* LD24 R%d,#%d */\n", r1, lit3);
+      fprintf(f, "      gr%d = 0x%08x;\n", r1, lit3);
+    }
+
+  else if(op1 == 0xf && r1 == 0xc)
+    {
+      unsigned newpc = (pc & 0xfffffffc) + (((lit3 << 8) >> 8) << 2);
+      fprintf(f, "      /* BC %d */\n", lit3);
+      fprintf(f, "      if (cond)\n");
+      fprintf(f, "        {\n");
+      fprintf(f, "          npc = 0x%08x;\n", newpc);
+      fprintf(f, "          goto %s;\n", (GX_PC_INCLUDES(gx,newpc)) ? "shortjump" : "longjump");
+      fprintf(f, "        }\n");
+    }
+  else if(op1 == 0xf && r1 == 0xd)
+    {
+      unsigned newpc = (pc & 0xfffffffc) + (((lit3 << 8) >> 8) << 2);
+      fprintf(f, "      /* BNC %d */\n", lit3);
+      fprintf(f, "      if (! cond)\n");
+      fprintf(f, "        {\n");
+      fprintf(f, "          npc = 0x%08x;\n", newpc);
+      fprintf(f, "          goto %s;\n", (GX_PC_INCLUDES(gx,newpc)) ? "shortjump" : "longjump");
+      fprintf(f, "        }\n");
+    }
+  else if(op1 == 0xf && r1 == 0xe)
+    {
+      unsigned newpc = (pc & 0xfffffffc) + (((lit3 << 8) >> 8) << 2);
+      unsigned retpc = (pc & 0xfffffffc) + 4;
+      fprintf(f, "      /* BL %d */\n", lit3);
+      fprintf(f, "      gr14 = 0x%08x;\n", retpc);
+      fprintf(f, "      npc = 0x%08x;\n", newpc);
+      fprintf(f, "      goto %s;\n", (GX_PC_INCLUDES(gx,newpc)) ? "shortjump" : "longjump");
+    }
+  else if(op1 == 0xf && r1 == 0xf)
+    {
+      unsigned newpc = (pc & 0xfffffffc) + (((lit3 << 8) >> 8) << 2);
+      fprintf(f, "      /* BRA %d */\n", lit3);
+      fprintf(f, "      npc = 0x%08x;\n", newpc);
+      fprintf(f, "      goto %s;\n", (GX_PC_INCLUDES(gx,newpc)) ? "shortjump" : "longjump");
+    }
+
+  else
+   {
+      /* illegal instruction */
+      /* XXX */
+      fprintf(f, "      printf(\"ILLEGAL INSN 0x%08x @ PC 0x%08x\\n\");\n", insn, (unsigned)pc);
+      fprintf(f, "      abort();\n");
+    }
+}
+
+
+void
+m32r_emit_short_insn(sim_gx_block* gx, PCADDR pc, unsigned insn, int optimized)
+{
+  int op1  = (insn & 0xf000) >> 12;
+  int r1   = (insn & 0x0f00) >> 8;
+  int op2  = (insn & 0x00f0) >> 4;
+  int op2part  = (insn & 0x00e0) >> 5;
+  int r2   = (insn & 0x000f);
+  signed char c = (insn & 0x00ff);
+  signed char c5 = (insn & 0x001f);
+  sim_gx_compiled_block* block = optimized ? gx->optimized_block : gx->learning_block;
+  FILE* f  = block->source_file;
+
+  ASSERT(f != NULL);
+
+  if(0)
+    ; /* place holder */
+  else if(op1 == 0x0 && op2 == 0x0)
+    {
+      fprintf(f, "      /* SUBV R%d,R%d */\n", r1, r2);
+      fprintf(f, "      temp = gr%d - gr%d;\n", r1, r2);
+      fprintf(f, "      cond = (unsigned) gr%d < (unsigned) gr%d;\n", r1, r2);
+      fprintf(f, "      gr%d = temp;\n", r1);
+    }
+  else if(op1 == 0x0 && op2 == 0x1)
+    {
+      fprintf(f, "      /* SUBX R%d,R%d */\n", r1, r2);
+      fprintf(f, "      temp = gr%d - gr%d - (cond ? 1:0);\n", r1, r2);
+      fprintf(f, "      cond = (unsigned) gr%d < (unsigned) gr%d;\n", r1, r2);
+      fprintf(f, "      gr%d = temp;\n", r1);
+    }
+  else if(op1 == 0x0 && op2 == 0x2)
+    {
+      fprintf(f, "      /* SUB R%d,R%d */\n", r1, r2);
+      fprintf(f, "      gr%d = gr%d - gr%d;\n", r1, r1, r2);
+    }
+  else if(op1 == 0x0 && op2 == 0x3)
+    {
+      fprintf(f, "      /* NEG R%d,R%d */\n", r1, r2);
+      fprintf(f, "      gr%d = 0 - gr%d;\n", r1, r2);
+    }
+  else if(op1 == 0x0 && op2 == 0x4)
+    {
+      fprintf(f, "      /* CMP R%d,R%d */\n", r1, r2);
+      fprintf(f, "      cond = (gr%d < gr%d);\n", r1, r2);
+    }
+  else if(op1 == 0x0 && op2 == 0x5)
+    {
+      fprintf(f, "      /* CMPU R%d,R%d */\n", r1, r2);
+      fprintf(f, "      cond = ((unsigned) gr%d < (unsigned) gr%d);\n", r1, r2);
+    }
+  else if(op1 == 0x0 && op2 == 0x8)
+    {
+      fprintf(f, "      /* ADDV R%d,R%d */\n", r1, r2);
+      fprintf(f, "      temp = gr%d + gr%d;\n", r1, r2);
+      fprintf(f, "      cond = ((gr%d & gr%d) | (gr%d & ~temp) | (gr%d & ~temp)) & (1<<31);\n", r1, r2, r1, r2);
+      fprintf(f, "      cond = (gr%d ^ gr%d ^ temp ^ cond) & (1<<31);\n", r1, r2);
+      fprintf(f, "      gr%d = temp;\n", r1);
+    }
+  else if(op1 == 0x0 && op2 == 0x9)
+    {
+      fprintf(f, "      /* ADDX R%d,R%d */\n", r1, r2);
+      fprintf(f, "      temp = gr%d + gr%d + (cond ? 1:0);\n", r1, r2);
+      fprintf(f, "      cond = ((gr%d & gr%d) | (gr%d & ~temp) | (gr%d & ~temp)) & (1<<31);\n", r1, r2, r1, r2);
+      fprintf(f, "      gr%d = temp;\n", r1);
+    }
+  else if(op1 == 0x0 && op2 == 0xa)
+    {
+      fprintf(f, "      /* ADD R%d,R%d */\n", r1, r2);
+      fprintf(f, "      gr%d = gr%d + gr%d;\n", r1, r1, r2);
+    }
+  else if(op1 == 0x0 && op2 == 0xb)
+    {
+      fprintf(f, "      /* NOT R%d,R%d */\n", r1, r2);
+      fprintf(f, "      gr%d = ~ gr%d;\n", r1, r2);
+    }
+  else if(op1 == 0x0 && op2 == 0xc)
+    {
+      fprintf(f, "      /* AND R%d,R%d */\n", r1, r2);
+      fprintf(f, "      gr%d = gr%d & gr%d;\n", r1, r1, r2);
+    }
+  else if(op1 == 0x0 && op2 == 0xd)
+    {
+      fprintf(f, "      /* XOR R%d,R%d */\n", r1, r2);
+      fprintf(f, "      gr%d = gr%d ^ gr%d;\n", r1, r1, r2);
+    }
+  else if(op1 == 0x0 && op2 == 0xe)
+    {
+      fprintf(f, "      /* OR R%d,R%d */\n", r1, r2);
+      fprintf(f, "      gr%d = gr%d | gr%d;\n", r1, r1, r2);
+    }
+
+  else if(op1 == 0x1 && op2 == 0x0)
+    {
+      fprintf(f, "      /* SRL R%d,R%d */\n", r1, r2);
+      fprintf(f, "      gr%d = (unsigned) gr%d >> (gr%d & 0x1f);\n", r1, r1, r2);
+    }
+  else if(op1 == 0x1 && op2 == 0x2)
+    {
+      fprintf(f, "      /* SRA R%d,R%d */\n", r1, r2);
+      fprintf(f, "      gr%d = gr%d >> (gr%d & 0x1f);\n", r1, r1, r2);
+    }
+  else if(op1 == 0x1 && op2 == 0x4)
+    {
+      fprintf(f, "      /* SLL R%d,R%d */\n", r1, r2);
+      fprintf(f, "      gr%d = gr%d << (gr%d & 0x1f);\n", r1, r1, r2);
+    }
+  else if(op1 == 0x1 && op2 == 0x6)
+    {
+      fprintf(f, "      /* MUL R%d,R%d */\n", r1, r2);
+      fprintf(f, "      gr%d = gr%d * gr%d;\n", r1, r1, r2);
+    }
+  else if(op1 == 0x1 && op2 == 0x8)
+    {
+      fprintf(f, "      /* MV R%d,R%d */\n", r1, r2);
+      fprintf(f, "      gr%d = gr%d;\n", r1, r2);
+    }
+  else if(op1 == 0x1 && op2 == 0x9)
+    {
+      fprintf(f, "      /* MVFC R%d,CR%d */\n", r1, r2);
+      if(r2 == 0) /* psw */
+	fprintf(f, "      gr%d = (cr0 & 0x00c140) | (sm ? 0x80 : 0 ) | (cond ? 1 : 0);\n", r1);
+      else if(r2 == 1) /* cbr */
+	fprintf(f, "      gr%d = (cond ? 1 : 0);\n", r1);
+      else if(r2 == 2) /* spi */
+	{
+	  fprintf(f, "      if (sm) gr%d = cr2;\n", r1);
+	  fprintf(f, "      else gr%d = gr15;\n", r1);
+	}
+      else if(r2 == 3) /* spu */
+	{
+	  fprintf(f, "      if (!sm) gr%d = cr3;\n", r1);
+	  fprintf(f, "      else gr%d = gr15;\n", r1);
+	}
+      else
+	fprintf(f, "      gr%d = cr%d;\n", r1, r2);
+    }
+  else if(op1 == 0x1 && op2 == 0xa)
+    {
+      fprintf(f, "      /* MVTC R%d,CR%d */\n", r1, r2);
+      if(r2 == 0) /* psw */
+	{
+	  fprintf(f, "      cr0 = gr%d & 0x0000c1c1;\n", r1);
+	  fprintf(f, "      cond = cr0 & 1;\n");
+	  fprintf(f, "      cr2 = sm ? cr2 : gr15;\n");
+	  fprintf(f, "      cr3 = sm ? gr15 : cr3;\n");
+	  fprintf(f, "      sm = cr0 & 80;\n");
+ 	  fprintf(f, "      gr15 = sm ? cr3 : cr2;\n");
+	}
+      else if(r2 == 1) /* cbr */
+	  ; /* no effect */
+      else if(r2 == 2) /* spi */
+	{
+	  fprintf(f, "      if (sm) cr2 = gr%d;\n", r1);
+	  fprintf(f, "      else gr15 = gr%d;\n", r1);
+	}
+      else if(r2 == 3) /* spu */
+	{
+	  fprintf(f, "      if (!sm) cr3 = gr%d;\n", r1);
+	  fprintf(f, "      else gr15 = gr%d;\n", r1);
+	}
+      else if(r2 == 6) /* bpc */
+	fprintf(f, "      cr6 = gr%d & 0xfffffffe;\n", r1);
+      else
+	fprintf(f, "      cr%d = gr%d;\n", r1, r2);
+    }
+  else if(op1 == 0x1 && op2 == 0xc && r1 == 0xe)
+    {
+      fprintf(f, "      /* JL R%d */\n", r2);
+      fprintf(f, "      gr14 = (0x%08x & 0xfffffffc) + 4;\n", (unsigned)pc);
+      fprintf(f, "      npc = gr%d & 0xfffffffc;\n", r2);
+      fprintf(f, "      goto unknownjump;\n");
+    }
+  else if(op1 == 0x1 && op2 == 0xc && r1 == 0xf)
+    {
+      fprintf(f, "      /* JMP R%d */\n", r2);
+      fprintf(f, "      npc = gr%d & 0xfffffffc;\n", r2);
+      fprintf(f, "      goto unknownjump;\n");
+    }
+  else if(op1 == 0x1 && op2 == 0xd && r1 == 0x0 && r2 == 0x6)
+    {
+      fprintf(f, "      /* RTE */\n");
+      fprintf(f, "      cr0 = (cr0 & 0xff00) | (cr0 >> 8);\n");
+      fprintf(f, "      cond = cr0 & 0x01;\n");
+      fprintf(f, "      sm = cr0 & 0x80;\n");
+      fprintf(f, "      gr15 = sm ? cr3 : cr2;\n");
+      fprintf(f, "      npc = cr6 & 0xfffffffc;\n");
+      fprintf(f, "      goto unknownjump;\n");
+    }
+  else if(op1 == 0x1 && op2 == 0xf)
+    {
+      fprintf(f, "      /* TRAP #%d */\n", r2);
+      if (r2 == TRAP_SYSCALL) /* general syscall ABI */
+	{
+	  fprintf(f, "        {\n");
+	  fprintf(f, "          tgx_syscall_data d = { 0x%08x, gr0, gr1, gr2, gr3 };\n", (unsigned) pc);
+	  fprintf(f, "          (*(callbacks->syscall))(&d);\n");
+	  fprintf(f, "          gr2 = d.errcode;\n");
+	  fprintf(f, "          gr1 = d.result;\n");
+	  fprintf(f, "          gr0 = d.result2;\n");
+	  fprintf(f, "        }\n");
+	}
+      else if (r2 == 1) /* gdb breakpoint */
+	{
+	  fprintf(f, "      rc = %d;\n", GX_F_HALT);
+	  fprintf(f, "      goto save;\n");
+	}
+      else
+	{
+	  fprintf(f, "      cr6 = 0x%08x;\n", (unsigned)(pc + 4));
+	  fprintf(f, "      cr0 = (cr0 & 0x000040) | (sm ? 0x80 : 0 ) | (cond ? 1 : 0);\n");
+	  fprintf(f, "      cr0 = (cr0 & 0x0000ff) << 8 | (cr0 & 0x0000ff);\n");
+	  fprintf(f, "      npc = 0x%08x;\n", 0x40 + (r2 * 4)); /* EIT_TRAP_BASE_ADDR */
+	  fprintf(f, "      goto unknownjump;\n");
+	}
+    }
+
+  else if(op1 == 0x2 && op2 == 0x0)
+    {
+      fprintf(f, "      /* STB R%d,@R%d */\n", r1, r2);
+      fprintf(f, "      (*(callbacks->store1))(0x%08x, gr%d, gr%d & 0xff);\n", (unsigned)pc, r2, r1);
+    }
+  else if(op1 == 0x2 && op2 == 0x2)
+    {
+      fprintf(f, "      /* STH R%d,@R%d */\n", r1, r2);
+      fprintf(f, "      (*(callbacks->store2))(0x%08x, gr%d, gr%d & 0x0000ffff);\n", (unsigned)pc, r2, r1);
+    }
+  else if(op1 == 0x2 && op2 == 0x4)
+    {
+      fprintf(f, "      /* ST R%d,@R%d */\n", r1, r2);
+      fprintf(f, "      (*(callbacks->store))(0x%08x, gr%d, gr%d);\n", (unsigned)pc, r2, r1);
+    }
+  else if(op1 == 0x2 && op2 == 0x5)
+    {
+      fprintf(f, "      /* UNLOCK R%d,@R%d */\n", r1, r2);
+      fprintf(f, "      if(lock)\n");
+      fprintf(f, "        {\n");
+      fprintf(f, "          lock = 0;\n");
+      fprintf(f, "          (*(callbacks->store))(0x%08x, gr%d, gr%d);\n", (unsigned)pc, r2, r1);
+      fprintf(f, "        }\n");
+    }
+  else if(op1 == 0x2 && op2 == 0x6)
+    {
+      fprintf(f, "      /* ST R%d,@+R%d */\n", r1, r2);
+      fprintf(f, "      gr%d = gr%d + 4;\n", r2, r2);
+      fprintf(f, "      (*(callbacks->store))(0x%08x, gr%d, gr%d);\n", (unsigned)pc, r2, r1);
+    }
+  else if(op1 == 0x2 && op2 == 0x7)
+    {
+      fprintf(f, "      /* ST R%d,@-R%d */\n", r1, r2);
+      fprintf(f, "      gr%d = gr%d - 4;\n", r2, r2);
+      fprintf(f, "      (*(callbacks->store))(0x%08x, gr%d, gr%d);\n", (unsigned)pc, r2, r1);
+    }
+  else if(op1 == 0x2 && op2 == 0x8)
+    {
+      fprintf(f, "      /* LDB R%d,@R%d */\n", r1, r2);
+      fprintf(f, "      gr%d = (*(callbacks->load1))(0x%08x, gr%d);\n", r1, (unsigned)pc, r2);
+    }
+  else if(op1 == 0x2 && op2 == 0x9)
+    {
+      fprintf(f, "      /* LDUB R%d,@R%d */\n", r1, r2);
+      fprintf(f, "      gr%d = (unsigned char)(*(callbacks->load1))(0x%08x, gr%d);\n", r1, (unsigned)pc, r2);
+    }
+  else if(op1 == 0x2 && op2 == 0xa)
+    {
+      fprintf(f, "      /* LDH R%d,@R%d */\n", r1, r2);
+      fprintf(f, "      gr%d = (*(callbacks->load2))(0x%08x, gr%d);\n", r1, (unsigned)pc, r2);
+    }
+  else if(op1 == 0x2 && op2 == 0xb)
+    {
+      fprintf(f, "      /* LDUH R%d,@R%d */\n", r1, r2);
+      fprintf(f, "      gr%d = (unsigned short)(*(callbacks->load2))(0x%08x, gr%d);\n", r1, (unsigned)pc, r2);
+    }
+  else if(op1 == 0x2 && op2 == 0xc)
+    {
+      fprintf(f, "      /* LD R%d,@R%d */\n", r1, r2);
+      fprintf(f, "      gr%d = (*(callbacks->load))(0x%08x, gr%d);\n", r1, (unsigned)pc, r2);
+    }
+  else if(op1 == 0x2 && op2 == 0xd)
+    {
+      fprintf(f, "      /* LOCK R%d,@R%d */\n", r1, r2);
+      fprintf(f, "      lock = 1;\n");
+      fprintf(f, "      gr%d = (*(callbacks->load))(0x%08x, gr%d);\n", r1, (unsigned)pc, r2);
+    }
+  else if(op1 == 0x2 && op2 == 0xe)
+    {
+      fprintf(f, "      /* LD R%d,@R%d+ */\n", r1, r2);
+      fprintf(f, "      gr%d = (*(callbacks->load))(0x%08x, gr%d);\n", r1, (unsigned)pc, r2);
+      fprintf(f, "      gr%d = gr%d + 4;\n", r2, r2);
+    }
+
+  else if(op1 == 0x4)
+    {
+      fprintf(f, "      /* ADDI R%d,#%d */\n", r1, c);
+      fprintf(f, "      gr%d = gr%d + %d;\n", r1, r1, c);
+    }
+
+  else if(op1 == 0x5 && op2part == 0x0)
+    {
+      fprintf(f, "      /* SRLI R%d,#%d */\n", r1, c5);
+      fprintf(f, "      gr%d = ((unsigned) gr%d) >> %d;\n", r1, r1, c5);
+    }
+  else if(op1 == 0x5 && op2part == 0x1)
+    {
+      fprintf(f, "      /* SRAI R%d,#%d */\n", r1, c5);
+      fprintf(f, "      gr%d = gr%d >> %d;\n", r1, r1, c5);
+    }
+  else if(op1 == 0x5 && op2part == 0x2)
+    {
+      fprintf(f, "      /* SRLI R%d,#%d */\n", r1, c5);
+      fprintf(f, "      gr%d = gr%d << %d;\n", r1, r1, c5);
+    }
+
+  else if(op1 == 0x6)
+    {
+      fprintf(f, "      /* LDI R%d,#%d */\n", r1, c);
+      fprintf(f, "      gr%d = 0x%08x;\n", r1, c);
+    }
+
+  else if(op1 == 0x7 && r1 == 0xc)
+    {
+      unsigned newpc = (pc & 0xfffffffc) + (((int) c) << 2);
+      fprintf(f, "      /* BC %d */\n", c);
+      fprintf(f, "      if (cond)\n");
+      fprintf(f, "        {\n");
+      fprintf(f, "          npc = 0x%08x;\n", newpc);
+      fprintf(f, "          goto %s;\n", (GX_PC_INCLUDES(gx,newpc)) ? "shortjump" : "longjump");
+      fprintf(f, "        }\n");
+    }
+  else if(op1 == 0x7 && r1 == 0xd)
+    {
+      unsigned newpc = (pc & 0xfffffffc) + (((int) c) << 2);
+      fprintf(f, "      /* BNC %d */\n", c);
+      fprintf(f, "      if (! cond)\n");
+      fprintf(f, "        {\n");
+      fprintf(f, "          npc = 0x%08x;\n", newpc);
+      fprintf(f, "          goto %s;\n", (GX_PC_INCLUDES(gx,newpc)) ? "shortjump" : "longjump");
+      fprintf(f, "        }\n");
+    }
+  else if(op1 == 0x7 && r1 == 0xe)
+    {
+      unsigned newpc = (pc & 0xfffffffc) + (((int) c) << 2);
+      unsigned retpc = (pc & 0xfffffffc) + 4;
+      fprintf(f, "      /* BL %d */\n", c);
+      fprintf(f, "      gr14 = 0x%08x;\n", retpc);
+      fprintf(f, "      npc = 0x%08x;\n", newpc);
+      fprintf(f, "      goto %s;\n", (GX_PC_INCLUDES(gx,newpc)) ? "shortjump" : "longjump");
+    }
+  else if(op1 == 0x7 && r1 == 0xf)
+    {
+      unsigned newpc = (pc & 0xfffffffc) + (((int) c) << 2);
+      fprintf(f, "      /* BRA %d */\n", c);
+      fprintf(f, "      npc = 0x%08x;\n", newpc);
+      fprintf(f, "      goto %s;\n", (GX_PC_INCLUDES(gx,newpc)) ? "shortjump" : "longjump");
+    }
+
+  else if(op1 == 0x7 && op2 == 0x0 && r1 == 0x0 && r1 == 0x0)
+    {
+      fprintf(f, "      /* NOP */\n");
+    }
+
+  else
+    {
+      /* illegal instruction */
+      /* XXX */
+      fprintf(f, "      printf(\"ILLEGAL INSN 0x%04x @ PC 0x%08x\\n\");\n", insn, (unsigned) pc);
+      fprintf(f, "      abort();\n");
+    }
+}
+
diff --git a/sim/m32r-gx/ltconfig b/sim/m32r-gx/ltconfig
new file mode 100755
index 0000000..ef2c23a
--- /dev/null
+++ b/sim/m32r-gx/ltconfig
@@ -0,0 +1,1715 @@
+#! /bin/sh
+
+# ltconfig - Create a system-specific libtool.
+# Copyright (C) 1996-1998 Free Software Foundation, Inc.
+# Gordon Matzigkeit <gord@gnu.ai.mit.edu>, 1996
+#
+# This file is free software; you can redistribute it and/or modify it
+# under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 2 of the License, or
+# (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful, but
+# WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+# General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+#
+# As a special exception to the GNU General Public License, if you
+# distribute this file as part of a program that contains a
+# configuration script generated by Autoconf, you may include it under
+# the same distribution terms that you use for the rest of that program.
+
+# A lot of this script is taken from autoconf-2.10.
+
+# Check that we are running under the correct shell.
+SHELL=${CONFIG_SHELL-/bin/sh}
+echo=echo
+if test "X$1" = X--no-reexec; then
+  # Discard the --no-reexec flag, and continue.
+  shift
+elif test "X`($echo '\t') 2>/dev/null`" = 'X\t'; then
+  # Yippee, $echo works!
+  :
+else
+  # Restart under the correct shell.
+  exec "$SHELL" "$0" --no-reexec ${1+"$@"}
+fi
+
+# The HP-UX ksh and POSIX shell print the target directory to stdout
+# if CDPATH is set.
+if test "${CDPATH+set}" = set; then CDPATH=; export CDPATH; fi
+
+if test "X`($echo '\t') 2>/dev/null`" != 'X\t'; then
+  # The Solaris, AIX, and Digital Unix default echo programs unquote
+  # backslashes.  This makes it impossible to quote backslashes using
+  #   echo "$something" | sed 's/\\/\\\\/g'
+  #
+  # So, first we look for a working echo in the user's PATH.
+  IFS="${IFS= 	}"; save_ifs="$IFS"; IFS="${IFS}:"
+  for dir in $PATH /usr/ucb; do
+    if test -f $dir/echo && test "X`($dir/echo '\t') 2>/dev/null`" = 'X\t'; then
+      echo="$dir/echo"
+      break
+    fi
+  done
+  IFS="$save_ifs"
+
+  if test "X$echo" = Xecho; then
+    # We didn't find a better echo, so look for alternatives.
+    if test "X`(print -r '\t') 2>/dev/null`" = 'X\t'; then
+      # This shell has a builtin print -r that does the trick.
+      echo='print -r'
+    elif test -f /bin/ksh && test "X$CONFIG_SHELL" != X/bin/ksh; then
+      # If we have ksh, try running ltconfig again with it.
+      CONFIG_SHELL=/bin/ksh
+      export CONFIG_SHELL
+      exec "$CONFIG_SHELL" "$0" --no-reexec ${1+"$@"}
+    else
+      # Try using printf.
+      echo='printf %s\n'
+      if test "X`($echo '\t') 2>/dev/null`" != 'X\t'; then
+        # Oops.  We lost completely, so just stick with echo.
+        echo=echo
+      fi
+    fi
+  fi
+fi
+
+# Sed substitution that helps us do robust quoting.  It backslashifies
+# metacharacters that are still active within double-quoted strings.
+Xsed='sed -e s/^X//'
+sed_quote_subst='s/\([\\"\\`$\\\\]\)/\\\1/g'
+
+# Same as above, but do not quote variable references.
+double_quote_subst='s/\([\\"\\`\\\\]\)/\\\1/g'
+
+# The name of this program.
+progname=`$echo "X$0" | $Xsed -e 's%^.*/%%'`
+
+# Constants:
+PROGRAM=ltconfig
+PACKAGE=libtool
+VERSION=1.2b
+ac_compile='${CC-cc} -c $CFLAGS $CPPFLAGS conftest.c 1>&5'
+ac_link='${CC-cc} -o conftest $CFLAGS $CPPFLAGS $LDFLAGS conftest.c $LIBS 1>&5'
+rm="rm -f"
+
+help="Try \`$progname --help' for more information."
+
+# Global variables:
+default_ofile=libtool
+can_build_shared=yes
+enable_shared=yes
+# All known linkers require a `.a' archive for static linking.
+enable_static=yes
+ltmain=
+silent=
+srcdir=
+ac_config_guess=
+ac_config_sub=
+host=
+nonopt=
+ofile="$default_ofile"
+verify_host=yes
+with_gcc=no
+with_gnu_ld=no
+objext=o
+libext=a
+
+old_AR="$AR"
+old_CC="$CC"
+old_CFLAGS="$CFLAGS"
+old_CPPFLAGS="$CPPFLAGS"
+old_LD="$LD"
+old_LN_S="$LN_S"
+old_NM="$NM"
+old_RANLIB="$RANLIB"
+old_DLLTOOL="$DLLTOOL"
+old_AS="$AS"
+
+# Parse the command line options.
+args=
+prev=
+for option
+do
+  case "$option" in
+  -*=*) optarg=`echo "$option" | sed 's/[-_a-zA-Z0-9]*=//'` ;;
+  *) optarg= ;;
+  esac
+
+  # If the previous option needs an argument, assign it.
+  if test -n "$prev"; then
+    eval "$prev=\$option"
+    prev=
+    continue
+  fi
+
+  case "$option" in
+  --help) cat <<EOM
+Usage: $progname [OPTION]... LTMAIN [HOST]
+
+Generate a system-specific libtool script.
+
+    --debug                enable verbose shell tracing
+    --disable-shared       do not build shared libraries
+    --disable-static       do not build static libraries
+    --help                 display this help and exit
+    --no-verify            do not verify that HOST is a valid host type
+-o, --output=FILE          specify the output file [default=$default_ofile]
+    --quiet                same as \`--silent'
+    --silent               do not print informational messages
+    --srcdir=DIR           find \`config.guess' in DIR
+    --version              output version information and exit
+    --with-gcc             assume that the GNU C compiler will be used
+    --with-gnu-ld          assume that the C compiler uses the GNU linker
+
+LTMAIN is the \`ltmain.sh' shell script fragment that provides basic libtool
+functionality.
+
+HOST is the canonical host system name [default=guessed].
+EOM
+  exit 0
+  ;;
+
+  --debug)
+    echo "$progname: enabling shell trace mode"
+    set -x
+    ;;
+
+  --disable-shared) enable_shared=no ;;
+
+  --disable-static) enable_static=no ;;
+
+  --quiet | --silent) silent=yes ;;
+
+  --srcdir) prev=srcdir ;;
+  --srcdir=*) srcdir="$optarg" ;;
+
+  --no-verify) verify_host=no ;;
+
+  --output | -o) prev=ofile ;;
+  --output=*) ofile="$optarg" ;;
+
+  --version) echo "$PROGRAM (GNU $PACKAGE) $VERSION"; exit 0 ;;
+
+  --with-gcc) with_gcc=yes ;;
+  --with-gnu-ld) with_gnu_ld=yes ;;
+
+  -*)
+    echo "$progname: unrecognized option \`$option'" 1>&2
+    echo "$help" 1>&2
+    exit 1
+    ;;
+
+  *)
+    if test -z "$ltmain"; then
+      ltmain="$option"
+    elif test -z "$host"; then
+# This generates an unnecessary warning for sparc-sun-solaris4.1.3_U1
+#      if test -n "`echo $option| sed 's/[-a-z0-9.]//g'`"; then
+#        echo "$progname: warning \`$option' is not a valid host type" 1>&2
+#      fi
+      host="$option"
+    else
+      echo "$progname: too many arguments" 1>&2
+      echo "$help" 1>&2
+      exit 1
+    fi ;;
+  esac
+done
+
+if test -z "$ltmain"; then
+  echo "$progname: you must specify a LTMAIN file" 1>&2
+  echo "$help" 1>&2
+  exit 1
+fi
+
+if test ! -f "$ltmain"; then
+  echo "$progname: \`$ltmain' does not exist" 1>&2
+  echo "$help" 1>&2
+  exit 1
+fi
+
+# Quote any args containing shell metacharacters.
+ltconfig_args=
+for arg
+do
+  case "$arg" in
+  *" "*|*"	"*|*[\[\]\~\#\$\^\&\*\(\)\{\}\\\|\;\<\>\?]*)
+  ltconfig_args="$ltconfig_args '$arg'" ;;
+  *) ltconfig_args="$ltconfig_args $arg" ;;
+  esac
+done
+
+# A relevant subset of AC_INIT.
+
+# File descriptor usage:
+# 0 standard input
+# 1 file creation
+# 2 errors and warnings
+# 3 some systems may open it to /dev/tty
+# 4 used on the Kubota Titan
+# 5 compiler messages saved in config.log
+# 6 checking for... messages and results
+if test "$silent" = yes; then
+  exec 6>/dev/null
+else
+  exec 6>&1
+fi
+exec 5>>./config.log
+
+# NLS nuisances.
+# Only set LANG and LC_ALL to C if already set.
+# These must not be set unconditionally because not all systems understand
+# e.g. LANG=C (notably SCO).
+if test "${LC_ALL+set}" = set; then LC_ALL=C; export LC_ALL; fi
+if test "${LANG+set}"   = set; then LANG=C;   export LANG;   fi
+
+if (echo "testing\c"; echo 1,2,3) | grep c >/dev/null; then
+  # Stardent Vistra SVR4 grep lacks -e, says ghazi@caip.rutgers.edu.
+  if (echo -n testing; echo 1,2,3) | sed s/-n/xn/ | grep xn >/dev/null; then
+    ac_n= ac_c='
+' ac_t='	'
+  else
+    ac_n=-n ac_c= ac_t=
+  fi
+else
+  ac_n= ac_c='\c' ac_t=
+fi
+
+if test -z "$srcdir"; then
+  # Assume the source directory is the same one as the path to ltmain.sh.
+  srcdir=`$echo "$ltmain" | $Xsed -e 's%/[^/]*$%%'`
+  test "$srcdir" = "$ltmain" && srcdir=.
+fi
+
+trap "$rm conftest*; exit 1" 1 2 15
+if test "$verify_host" = yes; then
+  # Check for config.guess and config.sub.
+  ac_aux_dir=
+  for ac_dir in $srcdir $srcdir/.. $srcdir/../..; do
+    if test -f $ac_dir/config.guess; then
+      ac_aux_dir=$ac_dir
+      break
+    fi
+  done
+  if test -z "$ac_aux_dir"; then
+    echo "$progname: cannot find config.guess in $srcdir $srcdir/.. $srcdir/../.." 1>&2
+    echo "$help" 1>&2
+    exit 1
+  fi
+  ac_config_guess=$ac_aux_dir/config.guess
+  ac_config_sub=$ac_aux_dir/config.sub
+
+  # Make sure we can run config.sub.
+  if $SHELL $ac_config_sub sun4 >/dev/null 2>&1; then :
+  else
+    echo "$progname: cannot run $ac_config_sub" 1>&2
+    echo "$help" 1>&2
+    exit 1
+  fi
+
+  echo $ac_n "checking host system type""... $ac_c" 1>&6
+
+  host_alias=$host
+  case "$host_alias" in
+  "")
+    if host_alias=`$SHELL $ac_config_guess`; then :
+    else
+      echo "$progname: cannot guess host type; you must specify one" 1>&2
+      echo "$help" 1>&2
+      exit 1
+    fi ;;
+  esac
+  host=`$SHELL $ac_config_sub $host_alias`
+  echo "$ac_t$host" 1>&6
+
+  # Make sure the host verified.
+  test -z "$host" && exit 1
+
+elif test -z "$host"; then
+  echo "$progname: you must specify a host type if you use \`--no-verify'" 1>&2
+  echo "$help" 1>&2
+  exit 1
+else
+  host_alias=$host
+fi
+
+# Transform linux* to *-*-linux-gnu*, to support old configure scripts.
+case "$host_os" in
+linux-gnu*) ;;
+linux*) host=`echo $host | sed 's/^\(.*-.*-linux\)\(.*\)$/\1-gnu\2/'`
+esac
+
+host_cpu=`echo $host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\1/'`
+host_vendor=`echo $host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\2/'`
+host_os=`echo $host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'`
+
+case "$host_os" in
+aix3*)
+  # AIX sometimes has problems with the GCC collect2 program.  For some
+  # reason, if we set the COLLECT_NAMES environment variable, the problems
+  # vanish in a puff of smoke.
+  if test "${COLLECT_NAMES+set}" != set; then
+    COLLECT_NAMES=
+    export COLLECT_NAMES
+  fi
+  ;;
+esac
+
+# Determine commands to create old-style static archives.
+old_archive_cmds='$AR cru $oldlib$oldobjs'
+old_postinstall_cmds='chmod 644 $oldlib'
+old_postuninstall_cmds=
+
+# Set a sane default for `AR'.
+test -z "$AR" && AR=ar
+
+# If RANLIB is not set, then run the test.
+if test "${RANLIB+set}" != "set"; then
+  result=no
+
+  echo $ac_n "checking for ranlib... $ac_c" 1>&6
+  IFS="${IFS= 	}"; save_ifs="$IFS"; IFS="${IFS}:"
+  for dir in $PATH; do
+    test -z "$dir" && dir=.
+    if test -f $dir/ranlib; then
+      RANLIB="ranlib"
+      result="ranlib"
+      break
+    fi
+  done
+  IFS="$save_ifs"
+
+  echo "$ac_t$result" 1>&6
+fi
+
+if test -n "$RANLIB"; then
+  old_archive_cmds="$old_archive_cmds;\$RANLIB \$oldlib"
+  old_postinstall_cmds="\$RANLIB \$oldlib;$old_postinstall_cmds"
+fi
+
+# Set sane defaults for `DLLTOOL' and `AS', used on cygwin32.
+test -z "$DLLTOOL" && DLLTOOL=dlltool
+test -z "$AS" && AS=as
+
+# Check to see if we are using GCC.
+if test "$with_gcc" != yes || test -z "$CC"; then
+  # If CC is not set, then try to find GCC or a usable CC.
+  if test -z "$CC"; then
+    echo $ac_n "checking for gcc... $ac_c" 1>&6
+    IFS="${IFS= 	}"; save_ifs="$IFS"; IFS="${IFS}:"
+    for dir in $PATH; do
+      IFS="$save_ifs"
+      test -z "$dir" && dir=.
+      if test -f $dir/gcc; then
+	CC="gcc"
+	break
+      fi
+    done
+    IFS="$save_ifs"
+
+    if test -n "$CC"; then
+      echo "$ac_t$CC" 1>&6
+    else
+      echo "$ac_t"no 1>&6
+    fi
+  fi
+
+  # Not "gcc", so try "cc", rejecting "/usr/ucb/cc".
+  if test -z "$CC"; then
+    echo $ac_n "checking for cc... $ac_c" 1>&6
+    IFS="${IFS= 	}"; save_ifs="$IFS"; IFS="${IFS}:"
+    cc_rejected=no
+    for dir in $PATH; do
+      test -z "$dir" && dir=.
+      if test -f $dir/cc; then
+	if test "$dir/cc" = "/usr/ucb/cc"; then
+	  cc_rejected=yes
+	  continue
+	fi
+	CC="cc"
+	break
+      fi
+    done
+    IFS="$save_ifs"
+    if test $cc_rejected = yes; then
+      # We found a bogon in the path, so make sure we never use it.
+      set dummy $CC
+      shift
+      if test $# -gt 0; then
+	# We chose a different compiler from the bogus one.
+	# However, it has the same name, so the bogon will be chosen
+	# first if we set CC to just the name; use the full file name.
+	shift
+	set dummy "$dir/cc" "$@"
+	shift
+	CC="$@"
+      fi
+    fi
+
+    if test -n "$CC"; then
+      echo "$ac_t$CC" 1>&6
+    else
+      echo "$ac_t"no 1>&6
+    fi
+
+    if test -z "$CC"; then
+      echo "$progname: error: no acceptable cc found in \$PATH" 1>&2
+      exit 1
+    fi
+  fi
+
+  # Now see if the compiler is really GCC.
+  with_gcc=no
+  echo $ac_n "checking whether we are using GNU C... $ac_c" 1>&6
+  echo "$progname:470: checking whether we are using GNU C" >&5
+
+  $rm conftest.c
+  cat > conftest.c <<EOF
+#ifdef __GNUC__
+  yes;
+#endif
+EOF
+  if { ac_try='${CC-cc} -E conftest.c'; { (eval echo $progname:478: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }; } | egrep yes >/dev/null 2>&1; then
+    with_gcc=yes
+  fi
+  $rm conftest.c
+  echo "$ac_t$with_gcc" 1>&6
+fi
+
+# Allow CC to be a program name with arguments.
+set dummy $CC
+compiler="$2"
+
+echo $ac_n "checking for object suffix... $ac_c" 1>&6
+$rm conftest*
+echo 'int i = 1;' > conftest.c
+echo "$progname:492: checking for object suffix" >& 5
+if { (eval echo $progname:493: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>conftest.err; }; then
+  # Append any warnings to the config.log.
+  cat conftest.err 1>&5
+
+  for ac_file in conftest.*; do
+    case $ac_file in
+    *.c) ;;
+    *) objext=`echo $ac_file | sed -e s/conftest.//` ;;
+    esac
+  done
+else
+  cat conftest.err 1>&5
+  echo "$progname: failed program was:" >&5
+  cat conftest.c >&5
+fi
+$rm conftest*
+echo "$ac_t$objext" 1>&6
+
+echo $ac_n "checking for $compiler option to produce PIC... $ac_c" 1>&6
+pic_flag=
+special_shlib_compile_flags=
+wl=
+link_static_flag=
+no_builtin_flag=
+
+if test "$with_gcc" = yes; then
+  wl='-Wl,'
+  link_static_flag='-static'
+  no_builtin_flag=' -fno-builtin'
+
+  case "$host_os" in
+  aix3* | aix4* | irix5* | irix6* | osf3* | osf4*)
+    # PIC is the default for these OSes.
+    ;;
+  cygwin32* | mingw32* | os2*)
+    # We can build DLLs from non-PIC.
+    ;;
+  amigaos*)
+    # FIXME: we need at least 68020 code to build shared libraries, but
+    # adding the `-m68020' flag to GCC prevents building anything better,
+    # like `-m68040'.
+    pic_flag='-m68020 -resident32 -malways-restore-a4'
+    ;;
+  *)
+    pic_flag='-fPIC'
+    ;;
+  esac
+else
+  # PORTME Check for PIC flags for the system compiler.
+  case "$host_os" in
+  aix3* | aix4*)
+    # All AIX code is PIC.
+    link_static_flag='-bnso -bI:/lib/syscalls.exp'
+    ;;
+
+  hpux9* | hpux10* | hpux11*)
+    # Is there a better link_static_flag that works with the bundled CC?
+    wl='-Wl,'
+    link_static_flag="${wl}-a ${wl}archive"
+    pic_flag='+Z'
+    ;;
+
+  irix5* | irix6*)
+    wl='-Wl,'
+    link_static_flag='-non_shared'
+    # PIC (with -KPIC) is the default.
+    ;;
+
+  cygwin32* | mingw32* | os2*)
+    # We can build DLLs from non-PIC.
+    ;;
+
+  osf3* | osf4*)
+    # All OSF/1 code is PIC.
+    wl='-Wl,'
+    link_static_flag='-non_shared'
+    ;;
+
+  sco3.2v5*)
+    pic_flag='-Kpic'
+    link_static_flag='-dn'
+    special_shlib_compile_flags='-belf'
+    ;;
+
+  solaris2*)
+    pic_flag='-KPIC'
+    link_static_flag='-Bstatic'
+    wl='-Wl,'
+    ;;
+
+  sunos4*)
+    pic_flag='-PIC'
+    link_static_flag='-Bstatic'
+    wl='-Qoption ld '
+    ;;
+
+  sysv4.2uw2*)
+    pic_flag='-KPIC'
+    link_static_flag='-Bstatic'
+    wl='-Wl,'
+    ;;
+
+  uts4*)
+    pic_flag='-pic'
+    link_static_flag='-Bstatic'
+    ;;
+
+  *)
+    can_build_shared=no
+    ;;
+  esac
+fi
+
+if test -n "$pic_flag"; then
+  echo "$ac_t$pic_flag" 1>&6
+
+  # Check to make sure the pic_flag actually works.
+  echo $ac_n "checking if $compiler PIC flag $pic_flag works... $ac_c" 1>&6
+  $rm conftest*
+  echo "int some_variable = 0;" > conftest.c
+  save_CFLAGS="$CFLAGS"
+  CFLAGS="$CFLAGS $pic_flag -DPIC"
+  echo "$progname:615: checking if $compiler PIC flag $pic_flag works" >&5
+  if { (eval echo $progname:616: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>conftest.err; } && test -s conftest.$objext; then
+    # Append any warnings to the config.log.
+    cat conftest.err 1>&5
+
+    # On HP-UX, both CC and GCC only warn that PIC is supported... then they
+    # create non-PIC objects.  So, if there were any warnings, we assume that
+    # PIC is not supported.
+    if test -s conftest.err; then
+      echo "$ac_t"no 1>&6
+      can_build_shared=no
+      pic_flag=
+    else
+      echo "$ac_t"yes 1>&6
+      pic_flag=" $pic_flag"
+    fi
+  else
+    # Append any errors to the config.log.
+    cat conftest.err 1>&5
+    can_build_shared=no
+    pic_flag=
+    echo "$ac_t"no 1>&6
+  fi
+  CFLAGS="$save_CFLAGS"
+  $rm conftest*
+else
+  echo "$ac_t"none 1>&6
+fi
+
+# Check for any special shared library compilation flags.
+if test -n "$special_shlib_compile_flags"; then
+  echo "$progname: warning: \`$CC' requires \`$special_shlib_compile_flags' to build shared libraries" 1>&2
+  if echo "$old_CC $old_CFLAGS " | egrep -e "[ 	]$special_shlib_compile_flags[ 	]" >/dev/null; then :
+  else
+    echo "$progname: add \`$special_shlib_compile_flags' to the CC or CFLAGS env variable and reconfigure" 1>&2
+    can_build_shared=no
+  fi
+fi
+
+echo $ac_n "checking if $compiler static flag $link_static_flag works... $ac_c" 1>&6
+$rm conftest*
+echo 'main(){return(0);}' > conftest.c
+save_LDFLAGS="$LDFLAGS"
+LDFLAGS="$LDFLAGS $link_static_flag"
+echo "$progname:659: checking if $compiler static flag $link_static_flag works" >&5
+if { (eval echo $progname:660: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then
+  echo "$ac_t$link_static_flag" 1>&6
+else
+  echo "$ac_t"none 1>&6
+  link_static_flag=
+fi
+LDFLAGS="$save_LDFLAGS"
+$rm conftest*
+
+if test -z "$LN_S"; then
+  # Check to see if we can use ln -s, or we need hard links.
+  echo $ac_n "checking whether ln -s works... $ac_c" 1>&6
+  $rm conftestdata
+  if ln -s X conftestdata 2>/dev/null; then
+    $rm conftestdata
+    LN_S="ln -s"
+  else
+    LN_S=ln
+  fi
+  if test "$LN_S" = "ln -s"; then
+    echo "$ac_t"yes 1>&6
+  else
+    echo "$ac_t"no 1>&6
+  fi
+fi
+
+# Make sure LD is an absolute path.
+if test -z "$LD"; then
+  ac_prog=ld
+  if test "$with_gcc" = yes; then
+    # Check if gcc -print-prog-name=ld gives a path.
+    echo $ac_n "checking for ld used by GCC... $ac_c" 1>&6
+    echo "$progname:692: checking for ld used by GCC" >&5
+    ac_prog=`($CC -print-prog-name=ld) 2>&5`
+    case "$ac_prog" in
+    # Accept absolute paths.
+    /* | [A-Za-z]:[/\\]*)
+      test -z "$LD" && LD="$ac_prog"
+      ;;
+    "")
+      # If it fails, then pretend we are not using GCC.
+      ac_prog=ld
+      ;;
+    *)
+      # If it is relative, then search for the first ld in PATH.
+      with_gnu_ld=unknown
+      ;;
+    esac
+  elif test "$with_gnu_ld" = yes; then
+    echo $ac_n "checking for GNU ld... $ac_c" 1>&6
+    echo "$progname:710: checking for GNU ld" >&5
+  else
+    echo $ac_n "checking for non-GNU ld""... $ac_c" 1>&6
+    echo "$progname:713: checking for non-GNU ld" >&5
+  fi
+
+  if test -z "$LD"; then
+    IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS="${IFS}:"
+    for ac_dir in $PATH; do
+      test -z "$ac_dir" && ac_dir=.
+      if test -f "$ac_dir/$ac_prog"; then
+	LD="$ac_dir/$ac_prog"
+	# Check to see if the program is GNU ld.  I'd rather use --version,
+	# but apparently some GNU ld's only accept -v.
+	# Break only if it was the GNU/non-GNU ld that we prefer.
+	if "$LD" -v 2>&1 < /dev/null | egrep '(GNU|with BFD)' > /dev/null; then
+	  test "$with_gnu_ld" != no && break
+	else
+	  test "$with_gnu_ld" != yes && break
+	fi
+      fi
+    done
+    IFS="$ac_save_ifs"
+  fi
+
+  if test -n "$LD"; then
+    echo "$ac_t$LD" 1>&6
+  else
+    echo "$ac_t"no 1>&6
+  fi
+
+  if test -z "$LD"; then
+    echo "$progname: error: no acceptable ld found in \$PATH" 1>&2
+    exit 1
+  fi
+fi
+
+# Check to see if it really is or is not GNU ld.
+echo $ac_n "checking if the linker ($LD) is GNU ld... $ac_c" 1>&6
+# I'd rather use --version here, but apparently some GNU ld's only accept -v.
+if $LD -v 2>&1 </dev/null | egrep '(GNU|with BFD)' 1>&5; then
+  with_gnu_ld=yes
+else
+  with_gnu_ld=no
+fi
+echo "$ac_t$with_gnu_ld" 1>&6
+
+# See if the linker supports building shared libraries.
+echo $ac_n "checking whether the linker ($LD) supports shared libraries... $ac_c" 1>&6
+
+allow_undefined_flag=
+no_undefined_flag=
+archive_cmds=
+old_archive_from_new_cmds=
+export_dynamic_flag_spec=
+whole_archive_flag_spec=
+hardcode_libdir_flag_spec=
+hardcode_libdir_separator=
+hardcode_direct=no
+hardcode_minus_L=no
+hardcode_shlibpath_var=unsupported
+runpath_var=
+fix_srcfile_path=
+
+case "$host_os" in
+aix3* | aix4*)
+  # On AIX, the GNU linker works like the native linker.
+  with_gnu_ld=no
+  ;;
+esac
+
+ld_shlibs=yes
+if test "$with_gnu_ld" = yes; then
+
+  # See if GNU ld supports shared libraries.
+  case "$host_os" in
+  amigaos*)
+    archive_cmds='$rm $objdir/a2ixlibrary.data;$echo "#define NAME $libname" > $objdir/a2ixlibrary.data;$echo "#define LIBRARY_ID 1" >> $objdir/a2ixlibrary.data;$echo "#define VERSION $major" >> $objdir/a2ixlibrary.data;$echo "#define REVISION $revision" >> $objdir/a2ixlibrary.data;$AR cru $lib$libobjs;$RANLIB $lib;(cd $objdir && a2ixlibrary -32)'
+    hardcode_libdir_flag_spec='-L$libdir'
+    hardcode_minus_L=yes
+    ;;
+
+  sunos4*)
+    archive_cmds='$LD -assert pure-text -Bstatic -o $lib$libobjs'
+    hardcode_direct=yes
+    # The GNU linker will only hardcode -L options if -rpath is not
+    # used, but we will be using -rpath because we set
+    # hardcode_libdir_flag_spec below.
+    hardcode_minus_L=no
+    hardcode_shlibpath_var=no
+    ;;
+
+  cygwin32* | mingw32*)
+    if test "$with_gcc" = yes; then
+      # hardcode_libdir_flag_spec is actually meaningless, as there is
+      # no search path for DLLs.
+      hardcode_libdir_flag_spec='-L$libdir'
+      allow_undefined_flag=unsupported
+      # Very, very bogus.
+      echo '
+#include <windows.h>
+
+struct _reent *_impure_ptr;
+extern struct _reent *__imp_reent_data;
+BOOL APIENTRY
+__dll_entry (HINSTANCE hinst, DWORD reason, LPVOID reserved)
+{
+  _impure_ptr = __imp_reent_data;
+}
+' > libtool.c
+      archive_cmds='$CC -c '"`pwd`"'/libtool.c;echo EXPORTS > $soname-def;$NM$libobjs | $global_symbol_pipe | sed '\''s/.* //'\'' >> $soname-def;$LD -s --base-file $soname-base --dll -e ___dll_entry@12 -o $lib libtool.$objext$libobjs$deplibs;$DLLTOOL --as=$AS --dllname $soname --def $soname-def --base-file $soname-base --output-exp $soname-exp;$LD -s --base-file $soname-base $soname-exp --dll -e ___dll_entry@12 -o $lib libtool.$objext$libobjs$deplibs;$DLLTOOL --as=$AS --dllname $soname --def $soname-def --base-file $soname-base --output-exp $soname-exp;$LD $soname-exp --dll -e ___dll_entry@12 -o $lib libtool.$objext$libobjs$deplibs;$rm libtool.$objext $soname-base $soname-exp'
+      old_archive_from_new_cmds='$DLLTOOL --as=$AS --dllname $soname --def $soname-def --output-lib $objdir/$libname.a;$rm $soname-def'
+    else
+      # When not using gcc, we currently assume that we are using
+      # Microsoft Visual C++.
+      with_gnu_ld=no
+      # hardcode_libdir_flag_spec is actually meaningless, as there is
+      # no search path for DLLs.
+      hardcode_libdir_flag_spec=' '
+      allow_undefined_flag=unsupported
+      # Tell ltmain to make .lib files, not .a files.
+      libext=lib
+      # FIXME: Setting linknames here is a bad hack.
+      archive_cmds='$CC -o $lib$libobjs`echo "$deplibs" | sed -e '\''s/ -lc$//'\''` -link -dll;linknames='
+      # The linker will automatically build a .lib file if we build a DLL.
+      old_archive_from_new_cmds='true'
+      # FIXME: Should let the user specify the lib program.
+      old_archive_cmds='lib /OUT:$oldlib$oldobjs'
+      fix_srcfile_path='`cygpath -w $srcfile`'
+    fi
+    ;;
+
+  *)
+    if $LD --help 2>&1 | egrep ': supported targets:.* elf' > /dev/null; then
+      archive_cmds='$CC -shared ${wl}-soname $wl$soname -o $lib$libobjs'
+    else
+      ld_shlibs=no
+    fi
+    ;;
+  esac
+
+  if test "$ld_shlibs" = yes && test "$with_gnu_ld" = yes; then
+    runpath_var=LD_RUN_PATH
+    hardcode_libdir_flag_spec='${wl}--rpath ${wl}$libdir'
+    export_dynamic_flag_spec='${wl}--export-dynamic'
+    whole_archive_flag_spec='${wl}--whole-archive$convenience ${wl}--no-whole-archive'
+  fi
+else
+  # PORTME fill in a description of your system's linker (not GNU ld)
+  case "$host_os" in
+  aix3*)
+    allow_undefined_flag=unsupported
+    archive_cmds='$NM$libobjs | $global_symbol_pipe | sed '\''s/.* //'\'' > $lib.exp;$LD -o $objdir/$soname$libobjs -bE:$lib.exp -T512 -H512 -bM:SRE;$AR cru $lib $objdir/$soname'
+    # Note: this linker hardcodes the directories in LIBPATH if there
+    # are no directories specified by -L.
+    hardcode_minus_L=yes
+    if test "$with_gcc" = yes && test -z "$link_static_flag"; then
+      # Neither direct hardcoding nor static linking is supported with a
+      # broken collect2.
+      hardcode_direct=unsupported
+    fi
+    ;;
+
+  aix4*)
+    allow_undefined_flag=unsupported
+    archive_cmds='$NM$libobjs | $global_symbol_pipe | sed '\''s/.* //'\'' > $lib.exp;$CC -o $objdir/$soname$libobjs ${wl}-bE:$lib.exp ${wl}-bM:SRE ${wl}-bnoentry;$AR cru $lib $objdir/$soname'
+    hardcode_direct=yes
+    hardcode_minus_L=yes
+    ;;
+
+  amigaos*)
+    archive_cmds='$rm $objdir/a2ixlibrary.data;$echo "#define NAME $libname" > $objdir/a2ixlibrary.data;$echo "#define LIBRARY_ID 1" >> $objdir/a2ixlibrary.data;$echo "#define VERSION $major" >> $objdir/a2ixlibrary.data;$echo "#define REVISION $revision" >> $objdir/a2ixlibrary.data;$AR cru $lib$libobjs;$RANLIB $lib;(cd $objdir && a2ixlibrary -32)'
+    hardcode_libdir_flag_spec='-L$libdir'
+    hardcode_minus_L=yes
+    ;;
+
+  cygwin32* | mingw32*)
+    if test "$with_gcc" = yes; then
+      # hardcode_libdir_flag_spec is actually meaningless, as there is
+      # no search path for DLLs.
+      hardcode_libdir_flag_spec='-L$libdir'
+      allow_undefined_flag=unsupported
+      # Very, very bogus.
+      echo '
+#include <windows.h>
+
+struct _reent *_impure_ptr;
+extern struct _reent *__imp_reent_data;
+BOOL APIENTRY
+__dll_entry (HINSTANCE hinst, DWORD reason, LPVOID reserved)
+{
+  _impure_ptr = __imp_reent_data;
+}
+' > libtool.c
+      archive_cmds='$CC -c '"`pwd`"'/libtool.c;echo EXPORTS > $soname-def;$NM$libobjs | $global_symbol_pipe | sed '\''s/.* //'\'' >> $soname-def;$LD -s --base-file $soname-base --dll -e ___dll_entry@12 -o $lib libtool.$objext$libobjs$deplibs;$DLLTOOL --as=$AS --dllname $soname --def $soname-def --base-file $soname-base --output-exp $soname-exp;$LD -s --base-file $soname-base $soname-exp --dll -e ___dll_entry@12 -o $lib libtool.$objext$libobjs$deplibs;$DLLTOOL --as=$AS --dllname $soname --def $soname-def --base-file $soname-base --output-exp $soname-exp;$LD $soname-exp --dll -e ___dll_entry@12 -o $lib libtool.$objext$libobjs$deplibs;$rm libtool.$objext $soname-base $soname-exp'
+      old_archive_from_new_cmds='$DLLTOOL --as=$AS --dllname $soname --def $soname-def --output-lib $objdir/$libname.a;$rm $soname-def'
+    else
+      # When not using gcc, we currently assume that we are using
+      # Microsoft Visual C++.
+      # hardcode_libdir_flag_spec is actually meaningless, as there is
+      # no search path for DLLs.
+      hardcode_libdir_flag_spec=' '
+      allow_undefined_flag=unsupported
+      # Tell ltmain to make .lib files, not .a files.
+      libext=lib
+      # FIXME: Setting linknames here is a bad hack.
+      archive_cmds='$CC -o $lib$libobjs`echo "$deplibs" | sed -e '\''s/ -lc$//'\''` -link -dll;linknames='
+      # The linker will automatically build a .lib file if we build a DLL.
+      old_archive_from_new_cmds='true'
+      # FIXME: Should let the user specify the lib program.
+      old_archive_cmds='lib /OUT:$oldlib$oldobjs'
+      fix_srcfile_path='`cygpath -w $srcfile`'
+    fi
+    ;;
+
+  # FreeBSD 2.2.[012] allows us to include c++rt0.o to get C++ constructor
+  # support.  Future versions do this automatically, but an explicit c++rt0.o
+  # does not break anything, and helps significantly (at the cost of a little
+  # extra space).
+  freebsd2.2*)
+    archive_cmds='$LD -Bshareable -o $lib$libobjs /usr/lib/c++rt0.o'
+    hardcode_libdir_flag_spec='-R$libdir'
+    hardcode_direct=yes
+    hardcode_minus_L=yes
+    hardcode_shlibpath_var=no
+    ;;
+
+  # Unfortunately, older versions of FreeBSD 2 do not have this feature.
+  freebsd2*)
+    archive_cmds='$LD -Bshareable -o $lib$libobjs'
+    hardcode_direct=yes
+    hardcode_minus_L=yes
+    hardcode_shlibpath_var=no
+    ;;
+
+  # FreeBSD 3, at last, uses gcc -shared to do shared libraries.
+  freebsd3*)
+    archive_cmds='$CC -shared -o $lib$libobjs'
+    hardcode_libdir_flag_spec='-R$libdir'
+    hardcode_direct=yes
+    hardcode_minus_L=no
+    hardcode_shlibpath_var=no
+    ;;
+
+  hpux9*)
+    archive_cmds='$rm $objdir/$soname;$LD -b +s +b $install_libdir -o $objdir/$soname$libobjs;mv $objdir/$soname $lib'
+    hardcode_libdir_flag_spec='${wl}+b ${wl}$libdir'
+    hardcode_direct=yes
+    hardcode_minus_L=yes
+    export_dynamic_flag_spec='${wl}-E'
+    ;;
+
+  hpux10* | hpux11*)
+    archive_cmds='$LD -b +h $soname +s +b $install_libdir -o $lib$libobjs'
+    hardcode_libdir_flag_spec='${wl}+b ${wl}$libdir'
+    hardcode_direct=yes
+    hardcode_minus_L=yes
+    export_dynamic_flag_spec='${wl}-E'
+    ;;
+
+  irix5* | irix6*)
+    if test "$with_gcc" = yes; then
+      archive_cmds='$CC -shared -o $lib ${wl}-soname ${wl}$soname ${wl}-set_version ${wl}$verstring$libobjs'
+    else
+      archive_cmds='$LD -shared -o $lib -soname $soname -set_version $verstring$libobjs'
+    fi
+    hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir'
+    ;;
+
+  netbsd*)
+    # Tested with NetBSD 1.2 ld
+    archive_cmds='$LD -Bshareable -o $lib$libobjs'
+    hardcode_libdir_flag_spec='-R$libdir'
+    hardcode_direct=yes
+    hardcode_shlibpath_var=no
+    ;;
+
+  openbsd*)
+    archive_cmds='$LD -Bshareable -o $lib$libobjs'
+    hardcode_libdir_flag_spec='-R$libdir'
+    hardcode_direct=yes
+    hardcode_shlibpath_var=no
+    ;;
+
+  os2*)
+    hardcode_libdir_flag_spec='-L$libdir'
+    hardcode_minus_L=yes
+    allow_undefined_flag=unsupported
+    archive_cmds='$echo "LIBRARY $libname INITINSTANCE" > $objdir/$libname.def;$echo "DESCRIPTION \"$libname\"" >> $objdir/$libname.def;$echo DATA >> $objdir/$libname.def;$echo " SINGLE NONSHARED" >> $objdir/$libname.def;$echo EXPORTS >> $objdir/$libname.def;emxexp$libobjs >> $objdir/$libname.def;$CC -Zdll -Zcrtdll -o $lib$libobjs $objdir/$libname.def'
+    old_archive_from_new_cmds='emximp -o $objdir/$libname.a $objdir/$libname.def'
+    ;;
+
+  osf3* | osf4*)
+    allow_undefined_flag=' -expect_unresolved \*'
+    archive_cmds='$LD -shared${allow_undefined_flag} -o $lib -soname $soname -set_version $verstring$libobjs$deplibs'
+    hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir'
+    hardcode_libdir_separator=:
+    ;;
+
+  sco3.2v5*)
+    archive_cmds='$LD -G -o $lib$libobjs'
+    hardcode_direct=yes
+    ;;
+
+  solaris2*)
+    no_undefined_flag=' -z text'
+    archive_cmds='$LD -G${allow_undefined_flag} -h $soname -o $lib$libobjs'
+    hardcode_libdir_flag_spec='-R$libdir'
+    hardcode_shlibpath_var=no
+
+    # Solaris 2 before 2.5 hardcodes -L paths.
+    case "$host_os" in
+    solaris2.[0-4]*)
+      hardcode_minus_L=yes
+      ;;
+    esac
+    ;;
+
+  sunos4*)
+    archive_cmds='$LD -assert pure-text -Bstatic -o $lib$libobjs'
+    hardcode_libdir_flag_spec='-L$libdir'
+    hardcode_direct=yes
+    hardcode_minus_L=yes
+    hardcode_shlibpath_var=no
+    ;;
+
+  uts4*)
+    archive_cmds='$LD -G -h $soname -o $lib$libobjs'
+    hardcode_libdir_flag_spec='-L$libdir'
+    hardcode_direct=no
+    hardcode_minus_L=no
+    hardcode_shlibpath_var=no
+    ;;
+
+  *)
+    ld_shlibs=no
+    can_build_shared=no
+    ;;
+  esac
+fi
+echo "$ac_t$ld_shlibs" 1>&6
+
+if test -z "$NM"; then
+  echo $ac_n "checking for BSD-compatible nm... $ac_c" 1>&6
+  case "$NM" in
+  /* | [A-Za-z]:[/\\]*) ;; # Let the user override the test with a path.
+  *)
+    IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS="${IFS}:"
+    for ac_dir in /usr/ucb /usr/ccs/bin $PATH /bin; do
+      test -z "$ac_dir" && ac_dir=.
+      if test -f $ac_dir/nm; then
+        # Check to see if the nm accepts a BSD-compat flag.
+        # Adding the `sed 1q' prevents false positives on HP-UX, which says:
+        #   nm: unknown option "B" ignored
+        if ($ac_dir/nm -B /dev/null 2>&1 | sed '1q'; exit 0) | egrep /dev/null >/dev/null; then
+          NM="$ac_dir/nm -B"
+        elif ($ac_dir/nm -p /dev/null 2>&1 | sed '1q'; exit 0) | egrep /dev/null >/dev/null; then
+          NM="$ac_dir/nm -p"
+	else
+          NM="$ac_dir/nm"
+	fi
+        break
+      fi
+    done
+    IFS="$ac_save_ifs"
+    test -z "$NM" && NM=nm
+    ;;
+  esac
+  echo "$ac_t$NM" 1>&6
+fi
+
+# Check for command to grab the raw symbol name followed by C symbol from nm.
+echo $ac_n "checking command to parse $NM output... $ac_c" 1>&6
+
+# These are sane defaults that work on at least a few old systems.
+# [They come from Ultrix.  What could be older than Ultrix?!! ;)]
+
+# Character class describing NM global symbol codes.
+symcode='[BCDEGRSTU]'
+
+# Regexp to match symbols that can be accessed directly from C.
+sympat='\([_A-Za-z][_A-Za-z0-9]*\)'
+
+# Transform the above into a raw symbol and a C symbol.
+symxfrm='\1 \1'
+
+# Define system-specific variables.
+case "$host_os" in
+aix*)
+  symcode='[BCDTU]'
+  ;;
+cygwin32* | mingw32*)
+  sympat='_\([_A-Za-z][_A-Za-z0-9]*\)'
+  symxfrm='_\1 \1'
+  ;;
+irix*)
+  # Cannot use undefined symbols on IRIX because inlined functions mess us up.
+  symcode='[BCDEGRST]'
+  ;;
+solaris2*)
+  symcode='[BDTU]'
+  ;;
+esac
+
+# If we're using GNU nm, then use its standard symbol codes.
+if $NM -V 2>&1 | egrep '(GNU|with BFD)' > /dev/null; then
+  symcode='[ABCDGISTUW]'
+fi
+
+case "$host_os" in
+cygwin32* | mingw32*)
+  # We do not want undefined symbols on cygwin32.  The user must
+  # arrange to define them via -l arguments.
+  symcode='[ABCDGISTW]'
+  ;;
+esac
+
+# Write the raw and C identifiers.
+global_symbol_pipe="sed -n -e 's/^.* $symcode $sympat$/$symxfrm/p'"
+
+# Check to see that the pipe works correctly.
+pipe_works=no
+$rm conftest*
+cat > conftest.c <<EOF
+#ifdef __cplusplus
+extern "C" {
+#endif
+char nm_test_var;
+void nm_test_func(){}
+#ifdef __cplusplus
+}
+#endif
+main(){nm_test_var='a';nm_test_func();return(0);}
+EOF
+
+echo "$progname:1145: checking if global_symbol_pipe works" >&5
+if { (eval echo $progname:1146: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; } && test -s conftest.$objext; then
+  # Now try to grab the symbols.
+  nlist=conftest.nm
+  if { echo "$progname:1149: eval \"$NM conftest.$objext | $global_symbol_pipe > $nlist\"" >&5; eval "$NM conftest.$objext | $global_symbol_pipe > $nlist 2>&5"; } && test -s "$nlist"; then
+
+    # Try sorting and uniquifying the output.
+    if sort "$nlist" | uniq > "$nlist"T; then
+      mv -f "$nlist"T "$nlist"
+      wcout=`wc "$nlist" 2>/dev/null`
+      count=`$echo "X$wcout" | $Xsed -e 's/^[ 	]*\([0-9][0-9]*\).*$/\1/'`
+      (test "$count" -ge 0) 2>/dev/null || count=-1
+    else
+      rm -f "$nlist"T
+      count=-1
+    fi
+
+    # Make sure that we snagged all the symbols we need.
+    if egrep ' nm_test_var$' "$nlist" >/dev/null; then
+      if egrep ' nm_test_func$' "$nlist" >/dev/null; then
+	cat <<EOF > conftest.c
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+EOF
+        # Now generate the symbol file.
+        sed 's/^.* \(.*\)$/extern char \1;/' < "$nlist" >> conftest.c
+
+	cat <<EOF >> conftest.c
+#if defined (__STDC__) && __STDC__
+# define __ptr_t void *
+#else
+# define __ptr_t char *
+#endif
+
+/* The number of symbols in dld_preloaded_symbols, -1 if unsorted. */
+int dld_preloaded_symbol_count = $count;
+
+/* The mapping between symbol names and symbols. */
+struct {
+  char *name;
+  __ptr_t address;
+}
+dld_preloaded_symbols[] =
+{
+EOF
+        sed 's/^\(.*\) \(.*\)$/  {"\1", (__ptr_t) \&\2},/' < "$nlist" >> conftest.c
+        cat <<\EOF >> conftest.c
+  {0, (__ptr_t) 0}
+};
+
+#ifdef __cplusplus
+}
+#endif
+EOF
+        # Now try linking the two files.
+        mv conftest.$objext conftestm.$objext
+	save_LIBS="$LIBS"
+	save_CFLAGS="$CFLAGS"
+        LIBS="conftestm.$objext"
+	CFLAGS="$CFLAGS$no_builtin_flag"
+        if { (eval echo $progname:1207: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then
+          pipe_works=yes
+        else
+          echo "$progname: failed program was:" >&5
+          cat conftest.c >&5
+        fi
+        LIBS="$save_LIBS"
+      else
+        echo "cannot find nm_test_func in $nlist" >&5
+      fi
+    else
+      echo "cannot find nm_test_var in $nlist" >&5
+    fi
+  else
+    echo "cannot run $global_symbol_pipe" >&5
+  fi
+else
+  echo "$progname: failed program was:" >&5
+  cat conftest.c >&5
+fi
+$rm conftest*
+
+# Do not use the global_symbol_pipe unless it works.
+echo "$ac_t$pipe_works" 1>&6
+test "$pipe_works" = yes || global_symbol_pipe=
+
+# Check hardcoding attributes.
+echo $ac_n "checking how to hardcode library paths into programs... $ac_c" 1>&6
+hardcode_action=
+if test -n "$hardcode_libdir_flag_spec" || \
+   test -n "$runpath_var"; then
+
+  # We can hardcode non-existant directories.
+  if test "$hardcode_direct" != no && \
+     test "$hardcode_minus_L" != no && \
+     test "$hardcode_shlibpath_var" != no; then
+
+    # Linking always hardcodes the temporary library directory.
+    hardcode_action=relink
+  else
+    # We can link without hardcoding, and we can hardcode nonexisting dirs.
+    hardcode_action=immediate
+  fi
+else
+  # We cannot hardcode anything, or else we can only hardcode existing
+  # directories.
+  hardcode_action=unsupported
+fi
+echo "$ac_t$hardcode_action" 1>&6
+
+
+reload_flag=
+reload_cmds='$LD$reload_flag -o $output$reload_objs'
+echo $ac_n "checking for $LD option to reload object files... $ac_c" 1>&6
+# PORTME Some linkers may need a different reload flag.
+reload_flag='-r'
+echo "$ac_t$reload_flag" 1>&6
+test -n "$reload_flag" && reload_flag=" $reload_flag"
+
+# PORTME Fill in your ld.so characteristics
+library_names_spec=
+libname_spec='lib$name'
+soname_spec=
+postinstall_cmds=
+postuninstall_cmds=
+finish_cmds=
+finish_eval=
+shlibpath_var=
+version_type=none
+dynamic_linker="$host_os ld.so"
+
+echo $ac_n "checking dynamic linker characteristics... $ac_c" 1>&6
+case "$host_os" in
+aix3* | aix4*)
+  version_type=linux
+  library_names_spec='${libname}${release}.so$versuffix $libname.a'
+  shlibpath_var=LIBPATH
+
+  # AIX has no versioning support, so we append a major version to the name.
+  soname_spec='${libname}${release}.so$major'
+  ;;
+
+amigaos*)
+  library_names_spec='$libname.ixlibrary $libname.a'
+  # Create ${libname}_ixlibrary.a entries in /sys/libs.
+  finish_eval='for lib in `ls $libdir/*.ixlibrary 2>/dev/null`; do libname=`$echo "X$lib" | $Xsed -e '\''s%^.*/\([^/]*\)\.ixlibrary$%\1%'\''`; test $rm /sys/libs/${libname}_ixlibrary.a; $show "(cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a)"; (cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a) || exit 1; done'
+  ;;
+
+cygwin32* | mingw32*)
+  version_type=windows
+  if test "$with_gcc" = yes; then
+    library_names_spec='${libname}`echo ${release} | sed -e 's/[.]/-/g'`${versuffix}.dll $libname.a'
+  else
+    library_names_spec='${libname}`echo ${release} | sed -e 's/[.]/-/g'`${versuffix}.dll $libname.lib'
+  fi
+  dynamic_linker='Win32 ld.exe'
+  shlibpath_var=PATH
+  ;;
+
+freebsd2* | freebsd3*)
+  version_type=sunos
+  library_names_spec='${libname}${release}.so$versuffix $libname.so'
+  finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir'
+  shlibpath_var=LD_LIBRARY_PATH
+  ;;
+
+gnu*)
+  version_type=linux
+  library_names_spec='${libname}${release}.so$versuffix ${libname}.so'
+  shlibpath_var=LD_LIBRARY_PATH
+  ;;
+
+hpux9* | hpux10* | hpux11*)
+  # Give a soname corresponding to the major version so that dld.sl refuses to
+  # link against other versions.
+  dynamic_linker="$host_os dld.sl"
+  version_type=sunos
+  shlibpath_var=SHLIB_PATH
+  library_names_spec='${libname}${release}.sl$versuffix ${libname}${release}.sl$major $libname.sl'
+  soname_spec='${libname}${release}.sl$major'
+  # HP-UX runs *really* slowly unless shared libraries are mode 555.
+  postinstall_cmds='chmod 555 $lib'
+  ;;
+
+irix5* | irix6*)
+  version_type=osf
+  soname_spec='${libname}${release}.so'
+  library_names_spec='${libname}${release}.so$versuffix $libname.so'
+  shlibpath_var=LD_LIBRARY_PATH
+  ;;
+
+# No shared lib support for Linux oldld, aout, or coff.
+linux-gnuoldld* | linux-gnuaout* | linux-gnucoff*)
+  dynamic_linker=no
+  ;;
+
+# This must be Linux ELF.
+linux-gnu*)
+  version_type=linux
+  library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so$major $libname.so'
+  soname_spec='${libname}${release}.so$major'
+  finish_cmds='PATH="\$PATH:/sbin" ldconfig -n $libdir'
+  shlibpath_var=LD_LIBRARY_PATH
+
+  if test -f /lib/ld.so.1; then
+    dynamic_linker='GNU ld.so'
+  else
+    # Only the GNU ld.so supports shared libraries on MkLinux.
+    case "$host_cpu" in
+    powerpc*) dynamic_linker=no ;;
+    *) dynamic_linker='Linux ld.so' ;;
+    esac
+  fi
+  ;;
+
+netbsd* | openbsd*)
+  version_type=sunos
+  library_names_spec='${libname}${release}.so$versuffix'
+  finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir'
+  shlibpath_var=LD_LIBRARY_PATH
+  ;;
+
+os2*)
+  libname_spec='$name'
+  library_names_spec='$libname.dll $libname.a'
+  dynamic_linker='OS/2 ld.exe'
+  shlibpath_var=LIBPATH
+  ;;
+
+osf3* | osf4*)
+  version_type=osf
+  soname_spec='${libname}${release}.so'
+  library_names_spec='${libname}${release}.so$versuffix $libname.so'
+  shlibpath_var=LD_LIBRARY_PATH
+  ;;
+
+sco3.2v5*)
+  version_type=osf
+  soname_spec='${libname}${release}.so$major'
+  library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so$major $libname.so'
+  shlibpath_var=LD_LIBRARY_PATH
+  ;;
+
+solaris2*)
+  version_type=linux
+  library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so$major $libname.so'
+  soname_spec='${libname}${release}.so$major'
+  shlibpath_var=LD_LIBRARY_PATH
+  # ldd complains unless libraries are executable
+  postinstall_cmds='chmod +x $lib'
+  ;;
+
+sunos4*)
+  version_type=sunos
+  library_names_spec='${libname}${release}.so$versuffix ${libname}.so$versuffix'
+  finish_cmds='PATH="\$PATH:/usr/etc" ldconfig $libdir'
+  shlibpath_var=LD_LIBRARY_PATH
+  ;;
+
+sysv4.2uw2*)
+  version_type=linux
+  library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so$major $libname.so'
+  soname_spec='${libname}${release}.so$major'
+  shlibpath_var=LD_LIBRARY_PATH
+  ;;
+
+uts4*)
+  version_type=linux
+  library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so$major $libname.so'
+  soname_spec='${libname}${release}.so$major'
+  shlibpath_var=LD_LIBRARY_PATH
+  ;;
+
+*)
+  dynamic_linker=no
+  ;;
+esac
+echo "$ac_t$dynamic_linker"
+test "$dynamic_linker" = no && can_build_shared=no
+
+# Report the final consequences.
+echo "checking if libtool supports shared libraries... $can_build_shared" 1>&6
+
+echo $ac_n "checking whether to build shared libraries... $ac_c" 1>&6
+test "$can_build_shared" = "no" && enable_shared=no
+
+# On AIX, shared libraries and static libraries use the same namespace, and
+# are all built from PIC.
+case "$host_os" in
+aix*)
+  test "$enable_shared" = yes && enable_static=no
+  if test -n "$RANLIB"; then
+    archive_cmds="$archive_cmds;\$RANLIB \$lib"
+    postinstall_cmds='$RANLIB $lib'
+  fi
+  ;;
+esac
+
+echo "$ac_t$enable_shared" 1>&6
+
+# Make sure either enable_shared or enable_static is yes.
+test "$enable_shared" = yes || enable_static=yes
+
+echo "checking whether to build static libraries... $enable_static" 1>&6
+
+echo $ac_n "checking for objdir... $ac_c" 1>&6
+rm -f .libs 2>/dev/null
+mkdir .libs 2>/dev/null
+if test -d .libs; then
+  objdir=.libs
+else
+  # MS-DOS does not allow filenames that begin with a dot.
+  objdir=_libs
+fi
+rmdir .libs 2>/dev/null
+echo "$ac_t$objdir" 1>&6
+
+# Copy echo and quote the copy, instead of the original, because it is
+# used later.
+ltecho="$echo"
+
+# Now quote all the things that may contain metacharacters.
+for var in ltecho old_CC old_CFLAGS old_CPPFLAGS old_LD old_NM old_RANLIB \
+  old_LN_S old_DLLTOOL old_AS AR CC LD LN_S NM DLLTOOL AS reload_flag \
+  reload_cmds wl pic_flag link_static_flag no_builtin_flag \
+  export_dynamic_flag_spec whole_archive_flag_spec libname_spec \
+  library_names_spec soname_spec RANLIB \
+  old_archive_cmds old_archive_from_new_cmds old_postinstall_cmds \
+  old_postuninstall_cmds archive_cmds postinstall_cmds postuninstall_cmds \
+  allow_undefined_flag no_undefined_flag objext libext \
+  finish_cmds finish_eval global_symbol_pipe fix_srcfile_path \
+  hardcode_libdir_flag_spec hardcode_libdir_separator; do
+
+  case "$var" in
+  reload_cmds | old_archive_cmds | old_archive_from_new_cmds | \
+  old_postinstall_cmds | old_postuninstall_cmds | archive_cmds | \
+  postinstall_cmds | postuninstall_cmds | finish_cmds)
+    # Double-quote double-evaled strings.
+    eval "$var=\`\$echo \"X\$$var\" | \$Xsed -e \"\$double_quote_subst\" -e \"\$sed_quote_subst\"\`"
+    ;;
+  *)
+    eval "$var=\`\$echo \"X\$$var\" | \$Xsed -e \"\$sed_quote_subst\"\`"
+    ;;
+  esac
+done
+
+trap "$rm \"$ofile\"; exit 1" 1 2 15
+echo "creating $ofile"
+$rm "$ofile"
+cat <<EOF > "$ofile"
+#! $SHELL
+
+# `$echo "$ofile" | sed 's%^.*/%%'` - Provide generalized library-building support services.
+# Generated automatically by $PROGRAM - GNU $PACKAGE $VERSION
+# NOTE: Changes made to this file will be lost: look at ltconfig or ltmain.sh.
+#
+# Copyright (C) 1996-1998 Free Software Foundation, Inc.
+# Gordon Matzigkeit <gord@gnu.ai.mit.edu>, 1996
+#
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 2 of the License, or
+# (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful, but
+# WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+# General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+#
+# As a special exception to the GNU General Public License, if you
+# distribute this file as part of a program that contains a
+# configuration script generated by Autoconf, you may include it under
+# the same distribution terms that you use for the rest of that program.
+
+# Sed that helps us avoid accidentally triggering echo(1) options like -n.
+Xsed="sed -e s/^X//"
+
+# The HP-UX ksh and POSIX shell print the target directory to stdout
+# if CDPATH is set.
+if test "\${CDPATH+set}" = set; then CDPATH=; export CDPATH; fi
+
+### BEGIN LIBTOOL CONFIG
+# Libtool was configured as follows, on host `(hostname || uname -n) 2>/dev/null | sed 1q`:
+#
+# CC="$old_CC" CFLAGS="$old_CFLAGS" CPPFLAGS="$old_CPPFLAGS" \\
+# LD="$old_LD" NM="$old_NM" RANLIB="$old_RANLIB" LN_S="$old_LN_S" \\
+# DLLTOOL="$old_DLLTOOL" AS="$old_AS" \\
+#   $0$ltconfig_args
+#
+# Compiler and other test output produced by $progname, useful for
+# debugging $progname, is in ./config.log if it exists.
+
+# The version of $progname that generated this script.
+LTCONFIG_VERSION="$VERSION"
+
+# Shell to use when invoking shell scripts.
+SHELL="$SHELL"
+
+# Whether or not to build shared libraries.
+build_libtool_libs=$enable_shared
+
+# Whether or not to build static libraries.
+build_old_libs=$enable_static
+
+# The host system.
+host_alias="$host_alias"
+host="$host"
+
+# An echo program that does not interpret backslashes.
+echo="$ltecho"
+
+# The archiver.
+AR="$AR"
+
+# The default C compiler.
+CC="$CC"
+
+# The linker used to build libraries.
+LD="$LD"
+
+# Whether we need hard or soft links.
+LN_S="$LN_S"
+
+# A BSD-compatible nm program.
+NM="$NM"
+
+# Used on cygwin32: DLL creation program.
+DLLTOOL="$DLLTOOL"
+
+# Used on cygwin32: assembler.
+AS="$AS"
+
+# The name of the directory that contains temporary libtool files.
+objdir="$objdir"
+
+# How to create reloadable object files.
+reload_flag="$reload_flag"
+reload_cmds="$reload_cmds"
+
+# How to pass a linker flag through the compiler.
+wl="$wl"
+
+# Object file suffix (normally "o").
+objext="$objext"
+
+# Old archive suffix (normally "a").
+libext="$libext"
+
+# Additional compiler flags for building library objects.
+pic_flag="$pic_flag"
+
+# Compiler flag to prevent dynamic linking.
+link_static_flag="$link_static_flag"
+
+# Compiler flag to turn off builtin functions.
+no_builtin_flag="$no_builtin_flag"
+
+# Compiler flag to allow reflexive dlopens.
+export_dynamic_flag_spec="$export_dynamic_flag_spec"
+
+# Compiler flag to generate shared objects directly from archives.
+whole_archive_flag_spec="$whole_archive_flag_spec"
+
+# Library versioning type.
+version_type=$version_type
+
+# Format of library name prefix.
+libname_spec="$libname_spec"
+
+# List of archive names.  First name is the real one, the rest are links.
+# The last name is the one that the linker finds with -lNAME.
+library_names_spec="$library_names_spec"
+
+# The coded name of the library, if different from the real name.
+soname_spec="$soname_spec"
+
+# Commands used to build and install an old-style archive.
+RANLIB="$RANLIB"
+old_archive_cmds="$old_archive_cmds"
+old_postinstall_cmds="$old_postinstall_cmds"
+old_postuninstall_cmds="$old_postuninstall_cmds"
+
+# Create an old-style archive from a shared archive.
+old_archive_from_new_cmds="$old_archive_from_new_cmds"
+
+# Commands used to build and install a shared archive.
+archive_cmds="$archive_cmds"
+postinstall_cmds="$postinstall_cmds"
+postuninstall_cmds="$postuninstall_cmds"
+
+# Flag that allows shared libraries with undefined symbols to be built.
+allow_undefined_flag="$allow_undefined_flag"
+
+# Flag that forces no undefined symbols.
+no_undefined_flag="$no_undefined_flag"
+
+# Commands used to finish a libtool library installation in a directory.
+finish_cmds="$finish_cmds"
+
+# Same as above, but a single script fragment to be evaled but not shown.
+finish_eval="$finish_eval"
+
+# Take the output of nm and produce a listing of raw symbols and C names.
+global_symbol_pipe="$global_symbol_pipe"
+
+# This is the shared library runtime path variable.
+runpath_var=$runpath_var
+
+# This is the shared library path variable.
+shlibpath_var=$shlibpath_var
+
+# How to hardcode a shared library path into an executable.
+hardcode_action=$hardcode_action
+
+# Flag to hardcode \$libdir into a binary during linking.
+# This must work even if \$libdir does not exist.
+hardcode_libdir_flag_spec="$hardcode_libdir_flag_spec"
+
+# Whether we need a single -rpath flag with a separated argument.
+hardcode_libdir_separator="$hardcode_libdir_separator"
+
+# Set to yes if using DIR/libNAME.so during linking hardcodes DIR into the
+# resulting binary.
+hardcode_direct=$hardcode_direct
+
+# Set to yes if using the -LDIR flag during linking hardcodes DIR into the
+# resulting binary.
+hardcode_minus_L=$hardcode_minus_L
+
+# Set to yes if using SHLIBPATH_VAR=DIR during linking hardcodes DIR into
+# the resulting binary.
+hardcode_shlibpath_var=$hardcode_shlibpath_var
+
+# Fix the shell variable \$srcfile for the compiler.
+fix_srcfile_path="$fix_srcfile_path"
+EOF
+
+case "$host_os" in
+aix3*)
+  cat <<\EOF >> "$ofile"
+
+# AIX sometimes has problems with the GCC collect2 program.  For some
+# reason, if we set the COLLECT_NAMES environment variable, the problems
+# vanish in a puff of smoke.
+if test "${COLLECT_NAMES+set}" != set; then
+  COLLECT_NAMES=
+  export COLLECT_NAMES
+fi
+EOF
+  ;;
+esac
+
+echo '### END LIBTOOL CONFIG' >> "$ofile"
+echo >> "$ofile"
+
+# Append the ltmain.sh script.
+cat "$ltmain" >> "$ofile" || (rm -f "$ofile"; exit 1)
+
+chmod +x "$ofile"
+exit 0
+
+# Local Variables:
+# mode:shell-script
+# sh-indentation:2
+# End:
diff --git a/sim/m32r-gx/ltmain.sh b/sim/m32r-gx/ltmain.sh
new file mode 100644
index 0000000..0d2d5d1
--- /dev/null
+++ b/sim/m32r-gx/ltmain.sh
@@ -0,0 +1,2639 @@
+# ltmain.sh - Provide generalized library-building support services.
+# NOTE: Changing this file will not affect anything until you rerun ltconfig.
+#
+# Copyright (C) 1996-1998 Free Software Foundation, Inc.
+# Gordon Matzigkeit <gord@gnu.ai.mit.edu>, 1996
+#
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 2 of the License, or
+# (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful, but
+# WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+# General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+#
+# As a special exception to the GNU General Public License, if you
+# distribute this file as part of a program that contains a
+# configuration script generated by Autoconf, you may include it under
+# the same distribution terms that you use for the rest of that program.
+
+# Check that we have a working $echo.
+if test "X$1" = X--no-reexec; then
+  # Discard the --no-reexec flag, and continue.
+  shift
+elif test "X`($echo '\t') 2>/dev/null`" = 'X\t'; then
+  # Yippee, $echo works!
+  :
+else
+  # Restart under the correct shell, and then maybe $echo will work.
+  exec $SHELL "$0" --no-reexec ${1+"$@"}
+fi
+
+# The name of this program.
+progname=`$echo "$0" | sed 's%^.*/%%'`
+modename="$progname"
+
+# Constants.
+PROGRAM=ltmain.sh
+PACKAGE=libtool
+VERSION=1.2b
+
+default_mode=
+help="Try \`$progname --help' for more information."
+magic="%%%MAGIC variable%%%"
+mkdir="mkdir"
+mv="mv -f"
+rm="rm -f"
+
+# Sed substitution that helps us do robust quoting.  It backslashifies
+# metacharacters that are still active within double-quoted strings.
+Xsed='sed -e s/^X//'
+sed_quote_subst='s/\([\\`\\"$\\\\]\)/\\\1/g'
+
+# NLS nuisances.
+# Only set LANG and LC_ALL to C if already set.
+# These must not be set unconditionally because not all systems understand
+# e.g. LANG=C (notably SCO).
+# We save the old values to restore during execute mode.
+if test "${LC_ALL+set}" = set; then
+  save_LC_ALL="$LC_ALL"; LC_ALL=C; export LC_ALL
+fi
+if test "${LANG+set}" = set; then
+  save_LANG="$LANG"; LANG=C; export LANG
+fi
+
+if test "$LTCONFIG_VERSION" != "$VERSION"; then
+  echo "$modename: ltconfig version \`$LTCONFIG_VERSION' does not match $PROGRAM version \`$VERSION'" 1>&2
+  echo "Fatal configuration error.  See the $PACKAGE docs for more information." 1>&2
+  exit 1
+fi
+
+if test "$build_libtool_libs" != yes && test "$build_old_libs" != yes; then
+  echo "$modename: not configured to build any kind of library" 1>&2
+  echo "Fatal configuration error.  See the $PACKAGE docs for more information." 1>&2
+  exit 1
+fi
+
+# Global variables.
+mode=$default_mode
+nonopt=
+prev=
+prevopt=
+run=
+show="$echo"
+show_help=
+execute_dlfiles=
+lo2o="s/\\.lo\$/.${objext}/"
+los2o="s/\\.lo /.${objext} /g"
+
+# Parse our command line options once, thoroughly.
+while test $# -gt 0
+do
+  arg="$1"
+  shift
+
+  case "$arg" in
+  -*=*) optarg=`$echo "X$arg" | $Xsed -e 's/[-_a-zA-Z0-9]*=//'` ;;
+  *) optarg= ;;
+  esac
+
+  # If the previous option needs an argument, assign it.
+  if test -n "$prev"; then
+    case "$prev" in
+    execute_dlfiles)
+      eval "$prev=\"\$$prev \$arg\""
+      ;;
+    *)
+      eval "$prev=\$arg"
+      ;;
+    esac
+
+    prev=
+    prevopt=
+    continue
+  fi
+
+  # Have we seen a non-optional argument yet?
+  case "$arg" in
+  --help)
+    show_help=yes
+    ;;
+
+  --version)
+    echo "$PROGRAM (GNU $PACKAGE) $VERSION"
+    exit 0
+    ;;
+
+  --config)
+    sed -e '1,/^### BEGIN LIBTOOL CONFIG/d' -e '/^### END LIBTOOL CONFIG/,$d' $0
+    exit 0
+    ;;
+
+  --debug)
+    echo "$progname: enabling shell trace mode"
+    set -x
+    ;;
+
+  --dry-run | -n)
+    run=:
+    ;;
+
+  --features)
+    echo "host: $host"
+    if test "$build_libtool_libs" = yes; then
+      echo "enable shared libraries"
+    else
+      echo "disable shared libraries"
+    fi
+    if test "$build_old_libs" = yes; then
+      echo "enable static libraries"
+    else
+      echo "disable static libraries"
+    fi
+    exit 0
+    ;;
+
+  --finish) mode="finish" ;;
+
+  --mode) prevopt="--mode" prev=mode ;;
+  --mode=*) mode="$optarg" ;;
+
+  --quiet | --silent)
+    show=:
+    ;;
+
+  -dlopen)
+    prevopt="-dlopen"
+    prev=execute_dlfiles
+    ;;
+
+  -*)
+    $echo "$modename: unrecognized option \`$arg'" 1>&2
+    $echo "$help" 1>&2
+    exit 1
+    ;;
+
+  *)
+    nonopt="$arg"
+    break
+    ;;
+  esac
+done
+
+if test -n "$prevopt"; then
+  $echo "$modename: option \`$prevopt' requires an argument" 1>&2
+  $echo "$help" 1>&2
+  exit 1
+fi
+
+if test -z "$show_help"; then
+
+  # Infer the operation mode.
+  if test -z "$mode"; then
+    case "$nonopt" in
+    *cc | *++ | gcc* | *-gcc*)
+      mode=link
+      for arg
+      do
+        case "$arg" in
+        -c)
+           mode=compile
+           break
+           ;;
+        esac
+      done
+      ;;
+    *db | *dbx | *strace | *truss)
+      mode=execute
+      ;;
+    *install*|cp|mv)
+      mode=install
+      ;;
+    *rm)
+      mode=uninstall
+      ;;
+    *)
+      # If we have no mode, but dlfiles were specified, then do execute mode.
+      test -n "$execute_dlfiles" && mode=execute
+
+      # Just use the default operation mode.
+      if test -z "$mode"; then
+        if test -n "$nonopt"; then
+          $echo "$modename: warning: cannot infer operation mode from \`$nonopt'" 1>&2
+        else
+          $echo "$modename: warning: cannot infer operation mode without MODE-ARGS" 1>&2
+        fi
+      fi
+      ;;
+    esac
+  fi
+
+  # Only execute mode is allowed to have -dlopen flags.
+  if test -n "$execute_dlfiles" && test "$mode" != execute; then
+    $echo "$modename: unrecognized option \`-dlopen'" 1>&2
+    $echo "$help" 1>&2
+    exit 1
+  fi
+
+  # Change the help message to a mode-specific one.
+  generic_help="$help"
+  help="Try \`$modename --help --mode=$mode' for more information."
+
+  # These modes are in order of execution frequency so that they run quickly.
+  case "$mode" in
+  # libtool compile mode
+  compile)
+    modename="$modename: compile"
+    # Get the compilation command and the source file.
+    base_compile=
+    lastarg=
+    srcfile="$nonopt"
+    suppress_output=
+
+    for arg
+    do
+      # Accept any command-line options.
+      case "$arg" in
+      -o)
+	$echo "$modename: you cannot specify the output filename with \`-o'" 1>&2
+	$echo "$help" 1>&2
+	exit 1
+	;;
+
+      -static)
+	build_old_libs=yes
+	continue
+	;;
+      esac
+
+      # Accept the current argument as the source file.
+      lastarg="$srcfile"
+      srcfile="$arg"
+
+      # Aesthetically quote the previous argument.
+
+      # Backslashify any backslashes, double quotes, and dollar signs.
+      # These are the only characters that are still specially
+      # interpreted inside of double-quoted scrings.
+      lastarg=`$echo "X$lastarg" | $Xsed -e "$sed_quote_subst"`
+
+      # Double-quote args containing other shell metacharacters.
+      # Many Bourne shells cannot handle close brackets correctly in scan
+      # sets, so we specify it separately.
+      case "$lastarg" in
+      *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \	]*|*]*)
+	lastarg="\"$lastarg\""
+	;;
+      esac
+
+      # Add the previous argument to base_compile.
+      if test -z "$base_compile"; then
+	base_compile="$lastarg"
+      else
+	base_compile="$base_compile $lastarg"
+      fi
+    done
+
+    # Get the name of the library object.
+    libobj=`$echo "X$srcfile" | $Xsed -e 's%^.*/%%'`
+
+    # Recognize several different file suffixes.
+    xform='[cCFSfms]'
+    case "$libobj" in
+    *.ada) xform=ada ;;
+    *.adb) xform=adb ;;
+    *.ads) xform=ads ;;
+    *.asm) xform=asm ;;
+    *.c++) xform=c++ ;;
+    *.cc) xform=cc ;;
+    *.cpp) xform=cpp ;;
+    *.cxx) xform=cxx ;;
+    *.f90) xform=f90 ;;
+    *.for) xform=for ;;
+    esac
+
+    libobj=`$echo "X$libobj" | $Xsed -e "s/\.$xform$/.lo/"`
+
+    case "$libobj" in
+    *.lo) obj=`$echo "X$libobj" | $Xsed -e "$lo2o"` ;;
+    *)
+      $echo "$modename: cannot determine name of library object from \`$srcfile'" 1>&2
+      exit 1
+      ;;
+    esac
+
+    if test -z "$base_compile"; then
+      $echo "$modename: you must specify a compilation command" 1>&2
+      $echo "$help" 1>&2
+      exit 1
+    fi
+
+    # Delete any leftover library objects.
+    if test "$build_old_libs" = yes; then
+      $run $rm $obj $libobj
+      trap "$run $rm $obj $libobj; exit 1" 1 2 15
+    else
+      $run $rm $libobj
+      trap "$run $rm $libobj; exit 1" 1 2 15
+    fi
+
+    if test -n "$fix_srcfile_path"; then
+      eval srcfile=\"$fix_srcfile_path\"
+    fi
+
+    # Only build a PIC object if we are building libtool libraries.
+    if test "$build_libtool_libs" = yes; then
+      # Without this assignment, base_compile gets emptied.
+      fbsd_hideous_sh_bug=$base_compile
+
+      # All platforms use -DPIC, to notify preprocessed assembler code.
+      $show "$base_compile$pic_flag -DPIC $srcfile"
+      if $run eval "$base_compile\$pic_flag -DPIC \$srcfile"; then :
+      else
+        test -n "$obj" && $run $rm $obj
+        exit 1
+      fi
+
+      # If we have no pic_flag, then copy the object into place and finish.
+      if test -z "$pic_flag"; then
+        $show "$LN_S $obj $libobj"
+        $run $LN_S $obj $libobj
+        exit $?
+      fi
+
+      # Just move the object, then go on to compile the next one
+      $show "$mv $obj $libobj"
+      $run $mv $obj $libobj || exit $?
+
+      # Allow error messages only from the first compilation.
+      suppress_output=' >/dev/null 2>&1'
+    fi
+
+    # Only build a position-dependent object if we build old libraries.
+    if test "$build_old_libs" = yes; then
+      # Suppress compiler output if we already did a PIC compilation.
+      $show "$base_compile $srcfile$suppress_output"
+      if $run eval "$base_compile \$srcfile$suppress_output"; then :
+      else
+        $run $rm $obj $libobj
+        exit 1
+      fi
+    fi
+
+    # Create an invalid libtool object if no PIC, so that we do not
+    # accidentally link it into a program.
+    if test "$build_libtool_libs" != yes; then
+      $show "echo timestamp > $libobj"
+      $run eval "echo timestamp > \$libobj" || exit $?
+    fi
+
+    exit 0
+    ;;
+
+  # libtool link mode
+  link)
+    modename="$modename: link"
+    CC="$nonopt"
+    allow_undefined=yes
+    compile_command="$CC"
+    finalize_command="$CC"
+
+    compile_shlibpath=
+    finalize_shlibpath=
+    convenience=
+    old_convenience=
+    deplibs=
+    dlfiles=
+    dlprefiles=
+    export_dynamic=no
+    generated=
+    hardcode_libdirs=
+    libobjs=
+    link_against_libtool_libs=
+    ltlibs=
+    objs=
+    prev=
+    prevarg=
+    release=
+    rpath=
+    perm_rpath=
+    temp_rpath=
+    vinfo=
+
+    # We need to know -static, to get the right output filenames.
+    for arg
+    do
+      case "$arg" in
+      -all-static | -static)
+        if test "X$arg" = "X-all-static" && test "$build_libtool_libs" = yes && test -z "$link_static_flag"; then
+	    $echo "$modename: warning: complete static linking is impossible in this configuration" 1>&2
+        fi
+        build_libtool_libs=no
+	build_old_libs=yes
+        break
+        ;;
+      esac
+    done
+
+    # See if our shared archives depend on static archives.
+    test -n "$old_archive_from_new_cmds" && build_old_libs=yes
+
+    # Go through the arguments, transforming them on the way.
+    while test $# -gt 0; do
+      arg="$1"
+      shift
+
+      # If the previous option needs an argument, assign it.
+      if test -n "$prev"; then
+        case "$prev" in
+        output)
+          compile_command="$compile_command @OUTPUT@"
+          finalize_command="$finalize_command @OUTPUT@"
+          ;;
+        esac
+
+        case "$prev" in
+        dlfiles|dlprefiles)
+          case "$arg" in
+          *.la | *.lo) ;;  # We handle these cases below.
+          *)
+            dlprefiles="$dlprefiles $arg"
+            test "$prev" = dlfiles && dlfiles="$dlfiles $arg"
+            prev=
+            ;;
+          esac
+          ;;
+	release)
+	  release="-$arg"
+	  prev=
+	  continue
+	  ;;
+        rpath)
+          rpath="$rpath $arg"
+	  prev=
+	  continue
+	  ;;
+        *)
+          eval "$prev=\"\$arg\""
+          prev=
+          continue
+          ;;
+        esac
+      fi
+
+      prevarg="$arg"
+
+      case "$arg" in
+      -all-static)
+	if test -n "$link_static_flag"; then
+          compile_command="$compile_command $link_static_flag"
+	  finalize_command="$finalize_command $link_static_flag"
+        fi
+        continue
+	;;
+
+      -allow-undefined)
+	# FIXME: remove this flag sometime in the future.
+	$echo "$modename: \`-allow-undefined' is deprecated because it is the default" 1>&2
+	continue
+	;;
+
+      -dlopen)
+        prev=dlfiles
+        continue
+        ;;
+
+      -dlpreopen)
+        prev=dlprefiles
+        continue
+        ;;
+
+      -export-dynamic)
+        if test "$export_dynamic" != yes; then
+          export_dynamic=yes
+	  if test -n "$export_dynamic_flag_spec"; then
+	    eval arg=\"$export_dynamic_flag_spec\"
+	  else
+	    arg=
+	  fi
+
+          # Add the symbol object into the linking commands.
+	  compile_command="$compile_command @SYMFILE@"
+	  finalize_command="$finalize_command @SYMFILE@"
+        fi
+        ;;
+
+      -L*)
+        dir=`$echo "X$arg" | $Xsed -e 's%^-L\(.*\)$%\1%'`
+        case "$dir" in
+        /* | [A-Za-z]:[/\\]*)
+	  # Add the corresponding hardcode_libdir_flag, if it is not identical.
+          ;;
+        *)
+          $echo "$modename: \`-L$dir' cannot specify a relative directory" 1>&2
+          exit 1
+          ;;
+        esac
+        deplibs="$deplibs $arg"
+        ;;
+
+      -l*) deplibs="$deplibs $arg" ;;
+
+      -no-undefined)
+	allow_undefined=no
+	continue
+	;;
+
+      -o) prev=output ;;
+
+      -release)
+	prev=release
+	continue
+	;;
+
+      -rpath)
+        prev=rpath
+        continue
+        ;;
+
+      -static)
+	# If we have no pic_flag, then this is the same as -all-static.
+	if test -z "$pic_flag" && test -n "$link_static_flag"; then
+          compile_command="$compile_command $link_static_flag"
+	  finalize_command="$finalize_command $link_static_flag"
+        fi
+	continue
+	;;
+
+      -version-info)
+        prev=vinfo
+        continue
+        ;;
+
+      # Some other compiler flag.
+      -* | +*)
+	# Unknown arguments in both finalize_command and compile_command need
+	# to be aesthetically quoted because they are evaled later.
+	arg=`$echo "X$arg" | $Xsed -e "$sed_quote_subst"`
+	case "$arg" in
+	*[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \	]*|*]*)
+	  arg="\"$arg\""
+	  ;;
+	esac
+        ;;
+
+      *.o | *.obj | *.a | *.lib)
+        # A standard object.
+        objs="$objs $arg"
+        ;;
+
+      *.lo)
+        # A library object.
+	if test "$prev" = dlfiles; then
+	  dlfiles="$dlfiles $arg"
+	  if test "$build_libtool_libs" = yes; then
+	    prev=
+	    continue
+	  else
+	    # If libtool objects are unsupported, then we need to preload.
+	    prev=dlprefiles
+	  fi
+	fi
+
+	if test "$prev" = dlprefiles; then
+	  # Preload the old-style object.
+	  dlprefiles="$dlprefiles "`$echo "X$arg" | $Xsed -e "$lo2o"`
+	  prev=
+	fi
+	libobjs="$libobjs $arg"
+        ;;
+
+      *.la)
+        # A libtool-controlled library.
+
+        dlname=
+        libdir=
+        library_names=
+        old_library=
+
+        # Check to see that this really is a libtool archive.
+        if (sed -e '2q' $arg | egrep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then :
+        else
+          $echo "$modename: \`$arg' is not a valid libtool archive" 1>&2
+          exit 1
+        fi
+
+        # If there is no directory component, then add one.
+        case "$arg" in
+        */* | *\\*) . $arg ;;
+        *) . ./$arg ;;
+        esac
+
+        # Get the name of the library we link against.
+        linklib=
+        for l in $old_library $library_names; do
+          linklib="$l"
+        done
+
+        if test -z "$linklib"; then
+          $echo "$modename: cannot find name of link library for \`$arg'" 1>&2
+          exit 1
+        fi
+
+        # Find the relevant object directory and library name.
+        name=`$echo "X$arg" | $Xsed -e 's%^.*/%%' -e 's/\.la$//' -e 's/^lib//'`
+        dir=`$echo "X$arg" | $Xsed -e 's%/[^/]*$%%'`
+        if test "X$dir" = "X$arg"; then
+          dir="$objdir"
+        else
+          dir="$dir/$objdir"
+        fi
+
+        if test -z "$libdir"; then
+	  # It is a libtool convenience library, so add in its objects.
+	  convenience="$convenience $dir/$old_library"l
+	  old_convenience="$old_convenience $dir/$old_library"
+	  compile_command="$compile_command $dir/$old_library"
+	  finalize_command="$finalize_command $dir/$old_library"
+	  continue
+	fi
+
+        # This library was specified with -dlopen.
+        if test "$prev" = dlfiles; then
+          dlfiles="$dlfiles $arg"
+          if test -z "$dlname"; then
+            # If there is no dlname, we need to preload.
+            prev=dlprefiles
+          else
+            # We should not create a dependency on this library, but we
+	    # may need any libraries it requires.
+	    compile_command="$compile_command$dependency_libs"
+	    finalize_command="$finalize_command$dependency_libs"
+            prev=
+            continue
+          fi
+        fi
+
+        # The library was specified with -dlpreopen.
+        if test "$prev" = dlprefiles; then
+          # Prefer using a static library (so that no silly _DYNAMIC symbols
+          # are required to link).
+          if test -n "$old_library"; then
+            dlprefiles="$dlprefiles $dir/$old_library"
+          else
+            dlprefiles="$dlprefiles $dir/$linklib"
+          fi
+          prev=
+        fi
+
+        if test "$build_libtool_libs" = yes && test -n "$library_names"; then
+          link_against_libtool_libs="$link_against_libtool_libs $arg"
+          if test -n "$shlibpath_var"; then
+            # Make sure the rpath contains only unique directories.
+            case "$temp_rpath " in
+            *" $dir "*) ;;
+            *) temp_rpath="$temp_rpath $dir" ;;
+            esac
+          fi
+
+	  # This is the magic to use -rpath.
+          if test -n "$hardcode_libdir_flag_spec"; then
+            if test -n "$hardcode_libdir_separator"; then
+              if test -z "$hardcode_libdirs"; then
+                # Put the magic libdir with the hardcode flag.
+                hardcode_libdirs="$libdir"
+                libdir="@HARDCODE_LIBDIRS@"
+              else
+                # Just accumulate the unique libdirs.
+		case "$hardcode_libdir_separator$hardcode_libdirs$hardcode_libdir_separator" in
+		*"$hardcode_libdir_separator$libdir$hardcode_libdir_separator"*)
+		  ;;
+		*)
+		  hardcode_libdirs="$hardcode_libdirs$hardcode_libdir_separator$libdir"
+		  ;;
+		esac
+                libdir=
+              fi
+            fi
+
+            if test -n "$libdir"; then
+              eval flag=\"$hardcode_libdir_flag_spec\"
+
+              compile_command="$compile_command $flag"
+              finalize_command="$finalize_command $flag"
+            fi
+          elif test -n "$runpath_var"; then
+            # Do the same for the permanent run path.
+            case "$perm_rpath " in
+            *" $libdir "*) ;;
+            *) perm_rpath="$perm_rpath $libdir" ;;
+            esac
+          fi
+
+
+	  lib_linked=yes
+          case "$hardcode_action" in
+          immediate | unsupported)
+            if test "$hardcode_direct" = no; then
+              compile_command="$compile_command $dir/$linklib"
+            elif test "$hardcode_minus_L" = no; then
+	      case "$host" in
+	      *-*-sunos*)
+                compile_shlibpath="$compile_shlibpath$dir:"
+		;;
+	      esac
+              compile_command="$compile_command -L$dir -l$name"
+            elif test "$hardcode_shlibpath_var" = no; then
+              compile_shlibpath="$compile_shlibpath$dir:"
+              compile_command="$compile_command -l$name"
+	    else
+	      lib_linked=no
+            fi
+            ;;
+
+          relink)
+            # We need an absolute path.
+            case "$dir" in
+            /* | [A-Za-z]:[/\\]*) ;;
+            *)
+              absdir=`cd "$dir" && pwd`
+              if test -z "$absdir"; then
+                $echo "$modename: cannot determine absolute directory name of \`$dir'" 1>&2
+                exit 1
+              fi
+              dir="$absdir"
+              ;;
+            esac
+
+            if test "$hardcode_direct" = yes; then
+              compile_command="$compile_command $dir/$linklib"
+            elif test "$hardcode_minus_L" = yes; then
+              compile_command="$compile_command -L$dir -l$name"
+            elif test "$hardcode_shlibpath_var" = yes; then
+              compile_shlibpath="$compile_shlibpath$dir:"
+              compile_command="$compile_command -l$name"
+	    else
+	      lib_linked=no
+            fi
+            ;;
+
+	  *)
+	    lib_linked=no
+	    ;;
+          esac
+
+	  if test "$lib_linked" != yes; then
+	    $echo "$modename: configuration error: unsupported hardcode properties"
+	    exit 1
+	  fi
+
+          # Finalize command for both is simple: just hardcode it.
+          if test "$hardcode_direct" = yes; then
+            finalize_command="$finalize_command $libdir/$linklib"
+          elif test "$hardcode_minus_L" = yes; then
+            finalize_command="$finalize_command -L$libdir -l$name"
+          elif test "$hardcode_shlibpath_var" = yes; then
+            finalize_shlibpath="$finalize_shlibpath$libdir:"
+            finalize_command="$finalize_command -l$name"
+          else
+            # We cannot seem to hardcode it, guess we'll fake it.
+            finalize_command="$finalize_command -L$libdir -l$name"
+          fi
+        else
+          # Transform directly to old archives if we don't build new libraries.
+          if test -n "$pic_flag" && test -z "$old_library"; then
+            $echo "$modename: cannot find static library for \`$arg'" 1>&2
+            exit 1
+          fi
+
+	  # Here we assume that one of hardcode_direct or hardcode_minus_L
+	  # is not unsupported.  This is valid on all known static and
+	  # shared platforms.
+	  if test "$hardcode_direct" != unsupported; then
+	    test -n "$old_library" && linklib="$old_library"
+	    compile_command="$compile_command $dir/$linklib"
+	    finalize_command="$finalize_command $dir/$linklib"
+	  else
+	    compile_command="$compile_command -L$dir -l$name"
+	    finalize_command="$finalize_command -L$dir -l$name"
+	  fi
+        fi
+
+	# Add in any libraries that this one depends upon.
+	compile_command="$compile_command$dependency_libs"
+	finalize_command="$finalize_command$dependency_libs"
+	continue
+        ;;
+
+      # Some other compiler argument.
+      *)
+	# Unknown arguments in both finalize_command and compile_command need
+	# to be aesthetically quoted because they are evaled later.
+	arg=`$echo "X$arg" | $Xsed -e "$sed_quote_subst"`
+	case "$arg" in
+	*[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \	]*|*]*)
+	  arg="\"$arg\""
+	  ;;
+	esac
+        ;;
+      esac
+
+      # Now actually substitute the argument into the commands.
+      if test -n "$arg"; then
+	compile_command="$compile_command $arg"
+	finalize_command="$finalize_command $arg"
+      fi
+    done
+
+    if test -n "$prev"; then
+      $echo "$modename: the \`$prevarg' option requires an argument" 1>&2
+      $echo "$help" 1>&2
+      exit 1
+    fi
+
+    oldlibs=
+    case "$output" in
+    "")
+      $echo "$modename: you must specify an output file" 1>&2
+      $echo "$help" 1>&2
+      exit 1
+      ;;
+
+    */* | *\\*)
+      $echo "$modename: output file \`$output' must have no directory components" 1>&2
+      $echo "$help" 1>&2
+      exit 1
+      ;;
+
+    *.a | *.lib)
+      if test -n "$link_against_libtool_libs"; then
+        $echo "$modename: error: cannot link libtool libraries into archives" 1>&2
+        exit 1
+      fi
+
+      if test -n "$deplibs"; then
+        $echo "$modename: warning: \`-l' and \`-L' are ignored for archives" 1>&2
+      fi
+
+      if test -n "$dlfiles$dlprefiles"; then
+        $echo "$modename: warning: \`-dlopen' is ignored for archives" 1>&2
+      fi
+
+      if test -n "$rpath"; then
+        $echo "$modename: warning: \`-rpath' is ignored for archives" 1>&2
+      fi
+
+      if test -n "$vinfo"; then
+        $echo "$modename: warning: \`-version-info' is ignored for archives" 1>&2
+      fi
+
+      if test -n "$release"; then
+        $echo "$modename: warning: \`-release' is ignored for archives" 1>&2
+      fi
+
+      # Now set the variables for building old libraries.
+      build_libtool_libs=no
+      oldlibs="$output"
+      ;;
+
+    *.la)
+      # Make sure we only generate libraries of the form `libNAME.la'.
+      case "$output" in
+      lib*) ;;
+      *)
+	$echo "$modename: libtool library \`$output' must begin with \`lib'" 1>&2
+	$echo "$help" 1>&2
+	exit 1
+	;;
+      esac
+
+      name=`$echo "X$output" | $Xsed -e 's/\.la$//' -e 's/^lib//'`
+      eval libname=\"$libname_spec\"
+
+      # All the library-specific variables (install_libdir is set above).
+      library_names=
+      old_library=
+      dlname=
+
+      if test -n "$objs"; then
+        $echo "$modename: cannot build libtool library \`$output' from non-libtool objects:$objs" 2>&1
+        exit 1
+      fi
+
+      # How the heck are we supposed to write a wrapper for a shared library?
+      if test -n "$link_against_libtool_libs"; then
+        $echo "$modename: error: cannot link shared libraries into libtool libraries" 1>&2
+        exit 1
+      fi
+
+      if test -n "$dlfiles$dlprefiles"; then
+        $echo "$modename: warning: \`-dlopen' is ignored for libtool libraries" 1>&2
+      fi
+
+      set dummy $rpath
+      if test $# -gt 2; then
+	$echo "$modename: warning: ignoring multiple \`-rpath's for a libtool library" 1>&2
+      fi
+      install_libdir="$2"
+
+      # Now set the variables for building old libraries.
+      oldlibs="$objdir/$libname.$libext"
+      if test -z "$rpath"; then
+	# Building a libtool convenience library.
+	oldlibs="$objdir/$libname.al $oldlibs"
+	build_libtool_libs=convenience
+
+	if test -n "$vinfo"; then
+	  $echo "$modename: warning: \`-version-info' is ignored for convenience libraries" 1>&2
+	fi
+
+	if test -n "$release"; then
+	  $echo "$modename: warning: \`-release' is ignored for convenience libraries" 1>&2
+	fi
+      else
+
+	# Parse the version information argument.
+	IFS="${IFS= 	}"; save_ifs="$IFS"; IFS=':'
+	set dummy $vinfo 0 0 0
+	IFS="$save_ifs"
+
+	if test -n "$8"; then
+	  $echo "$modename: too many parameters to \`-version-info'" 1>&2
+	  $echo "$help" 1>&2
+	  exit 1
+	fi
+
+	current="$2"
+	revision="$3"
+	age="$4"
+
+	# Check that each of the things are valid numbers.
+	case "$current" in
+	0 | [1-9] | [1-9][0-9]*) ;;
+	*)
+	  $echo "$modename: CURRENT \`$current' is not a nonnegative integer" 1>&2
+	  $echo "$modename: \`$vinfo' is not valid version information" 1>&2
+	  exit 1
+	  ;;
+	esac
+
+	case "$revision" in
+	0 | [1-9] | [1-9][0-9]*) ;;
+	*)
+	  $echo "$modename: REVISION \`$revision' is not a nonnegative integer" 1>&2
+	  $echo "$modename: \`$vinfo' is not valid version information" 1>&2
+	  exit 1
+	  ;;
+	esac
+
+	case "$age" in
+	0 | [1-9] | [1-9][0-9]*) ;;
+	*)
+	  $echo "$modename: AGE \`$age' is not a nonnegative integer" 1>&2
+	  $echo "$modename: \`$vinfo' is not valid version information" 1>&2
+	  exit 1
+	  ;;
+	esac
+
+	if test $age -gt $current; then
+	  $echo "$modename: AGE \`$age' is greater than the current interface number \`$current'" 1>&2
+	  $echo "$modename: \`$vinfo' is not valid version information" 1>&2
+	  exit 1
+	fi
+
+	# Calculate the version variables.
+	major=
+	versuffix=
+	verstring=
+	case "$version_type" in
+	none) ;;
+
+	linux)
+	  major=.`expr $current - $age`
+	  versuffix="$major.$age.$revision"
+	  ;;
+
+	osf)
+	  major=`expr $current - $age`
+	  versuffix=".$current.$age.$revision"
+	  verstring="$current.$age.$revision"
+
+	  # Add in all the interfaces that we are compatible with.
+	  loop=$age
+	  while test $loop != 0; do
+	    iface=`expr $current - $loop`
+	    loop=`expr $loop - 1`
+	    verstring="$verstring:${iface}.0"
+	  done
+
+	  # Make executables depend on our current version.
+	  verstring="$verstring:${current}.0"
+	  ;;
+
+	sunos)
+	  major=".$current"
+	  versuffix=".$current.$revision"
+	  ;;
+
+	windows)
+	  # Like Linux, but with '-' rather than '.', since we only
+	  # want one extension on Windows 95.
+	  major=`expr $current - $age`
+	  versuffix="-$major-$age-$revision"
+	  ;;
+
+	*)
+	  $echo "$modename: unknown library version type \`$version_type'" 1>&2
+	  echo "Fatal configuration error.  See the $PACKAGE docs for more information." 1>&2
+	  exit 1
+	  ;;
+	esac
+
+	# Clear the version info if we defaulted, and they specified a release.
+	if test -z "$vinfo" && test -n "$release"; then
+	  major=
+	  versuffix=
+	  verstring="0.0"
+	  case "$host" in
+	  *-*-sunos*)
+	    versuffix=".0.0"
+	    ;;
+	  esac
+	fi
+
+	# Check to see if the archive will have undefined symbols.
+	if test "$allow_undefined" = yes; then
+	  if test "$allow_undefined_flag" = unsupported; then
+	    $echo "$modename: warning: undefined symbols not allowed in $host shared libraries" 1>&2
+	    build_libtool_libs=no
+	    build_old_libs=yes
+	  fi
+	else
+	  # Don't allow undefined symbols.
+	  allow_undefined_flag="$no_undefined_flag"
+	fi
+
+	# Add libc to deplibs on all systems.
+	dependency_libs="$deplibs"
+	deplibs="$deplibs -lc"
+      fi
+
+      # Create the output directory, or remove our outputs if we need to.
+      if test -d $objdir; then
+        $show "${rm}r $objdir/$output $objdir/$libname.* $objdir/${libname}${release}.*"
+	$run ${rm}r $objdir/$output $objdir/$libname.* $objdir/${libname}${release}.*
+      else
+        $show "$mkdir $objdir"
+        $run $mkdir $objdir
+        status=$?
+        if test $status -ne 0 && test ! -d $objdir; then
+          exit $status
+        fi
+      fi
+
+      if test "$build_libtool_libs" = yes; then
+	# Get the real and link names of the library.
+	eval library_names=\"$library_names_spec\"
+	set dummy $library_names
+	realname="$2"
+	shift; shift
+
+	if test -n "$soname_spec"; then
+	  eval soname=\"$soname_spec\"
+	else
+	  soname="$realname"
+	fi
+
+	lib="$objdir/$realname"
+	for link
+	do
+	  linknames="$linknames $link"
+	done
+
+	# Use standard objects if they are PIC.
+	test -z "$pic_flag" && libobjs=`$echo "X$libobjs " | $Xsed -e "$los2o" -e 's/ $//g'`
+
+	# Transform .lo files to .o files.
+	test "$build_old_libs" = yes && oldobjs="$objs"`$echo "X$libobjs " | $Xsed -e 's/[^   ]*\.a //g' -e 's/[^   ]*\.lib //g' -e "$los2o" -e 's/ $//g'`
+
+	if test -n "$whole_archive_flag_spec"; then
+	  if test -n "$convenience"; then
+	    eval libobjs=\"\$libobjs $whole_archive_flag_spec\"
+	  fi
+	else
+	  for xlib in $convenience; do
+	    # Extract the objects.
+	    xdir="$xlib"x
+	    generated="$generated $xdir"
+	    xlib=`echo "$xlib" | $Xsed -e 's%^.*/%%'`
+
+	    $show "${rm}r $xdir"
+	    $run ${rm}r "$xdir"
+	    $show "mkdir $xdir"
+	    $run mkdir "$xdir"
+	    status=$?
+	    if test $status -ne 0 && test ! -d "$xdir"; then
+	      exit $status
+	    fi
+	    $show "(cd $xdir && $AR x ../$xlib)"
+	    $run eval "(cd \$xdir && $AR x ../\$xlib)" || exit $?
+
+	    libobjs="$libobjs `echo $xdir/*`"
+	  done
+	fi
+
+	# Do each of the archive commands.
+	eval cmds=\"$archive_cmds\"
+	IFS="${IFS= 	}"; save_ifs="$IFS"; IFS=';'
+	for cmd in $cmds; do
+	  IFS="$save_ifs"
+	  $show "$cmd"
+	  $run eval "$cmd" || exit $?
+	done
+	IFS="$save_ifs"
+
+	# Create links to the real library.
+	for linkname in $linknames; do
+	  if test "$realname" != "$linkname"; then
+	    $show "(cd $objdir && $LN_S $realname $linkname)"
+	    $run eval '(cd $objdir && $LN_S $realname $linkname)' || exit $?
+	  fi
+	done
+
+	# If -export-dynamic was specified, set the dlname.
+	if test "$export_dynamic" = yes; then
+	  # On all known operating systems, these are identical.
+	  dlname="$soname"
+	fi
+      fi
+      ;;
+
+    *.lo | *.o | *.obj)
+      if test -n "$link_against_libtool_libs"; then
+        $echo "$modename: error: cannot link libtool libraries into objects" 1>&2
+        exit 1
+      fi
+
+      if test -n "$deplibs"; then
+        $echo "$modename: warning: \`-l' and \`-L' are ignored for objects" 1>&2
+      fi
+
+      if test -n "$dlfiles$dlprefiles"; then
+        $echo "$modename: warning: \`-dlopen' is ignored for objects" 1>&2
+      fi
+
+      if test -n "$rpath"; then
+        $echo "$modename: warning: \`-rpath' is ignored for objects" 1>&2
+      fi
+
+      if test -n "$vinfo"; then
+        $echo "$modename: warning: \`-version-info' is ignored for objects" 1>&2
+      fi
+
+      if test -n "$release"; then
+        $echo "$modename: warning: \`-release' is ignored for objects" 1>&2
+      fi
+
+      case "$output" in
+      *.lo)
+        if test -n "$objs"; then
+          $echo "$modename: cannot build library object \`$output' from non-libtool objects" 1>&2
+          exit 1
+        fi
+        libobj="$output"
+        obj=`$echo "X$output" | $Xsed -e "$lo2o"`
+        ;;
+      *)
+        libobj=
+        obj="$output"
+        ;;
+      esac
+
+      # Delete the old objects.
+      $run $rm $obj $libobj
+
+      # Create the old-style object.
+      reload_objs="$objs"`$echo "X$libobjs " | $Xsed -e 's/[^       ]*\.a //g' -e 's/[^       ]*\.lib //g' -e "$los2o" -e 's/ $//g'`
+
+      output="$obj"
+      eval cmds=\"$reload_cmds\"
+      IFS="${IFS= 	}"; save_ifs="$IFS"; IFS=';'
+      for cmd in $cmds; do
+        IFS="$save_ifs"
+        $show "$cmd"
+        $run eval "$cmd" || exit $?
+      done
+      IFS="$save_ifs"
+
+      # Exit if we aren't doing a library object file.
+      test -z "$libobj" && exit 0
+
+      if test "$build_libtool_libs" != yes; then
+        # Create an invalid libtool object if no PIC, so that we don't
+        # accidentally link it into a program.
+        $show "echo timestamp > $libobj"
+        $run eval "echo timestamp > $libobj" || exit $?
+        exit 0
+      fi
+
+      if test -n "$pic_flag"; then
+        # Only do commands if we really have different PIC objects.
+        reload_objs="$libobjs"
+        output="$libobj"
+        eval cmds=\"$reload_cmds\"
+        IFS="${IFS= 	}"; save_ifs="$IFS"; IFS=';'
+        for cmd in $cmds; do
+          IFS="$save_ifs"
+          $show "$cmd"
+          $run eval "$cmd" || exit $?
+        done
+        IFS="$save_ifs"
+      else
+        # Just create a symlink.
+        $show "$LN_S $obj $libobj"
+        $run $LN_S $obj $libobj || exit $?
+      fi
+
+      exit 0
+      ;;
+
+    *)
+      if test -n "$vinfo"; then
+        $echo "$modename: warning: \`-version-info' is ignored for programs" 1>&2
+      fi
+
+      if test -n "$release"; then
+        $echo "$modename: warning: \`-release' is ignored for programs" 1>&2
+      fi
+
+      if test -n "$rpath"; then
+	# If the user specified any rpath flags, then add them.
+	for libdir in $rpath; do
+          if test -n "$hardcode_libdir_flag_spec"; then
+            if test -n "$hardcode_libdir_separator"; then
+              if test -z "$hardcode_libdirs"; then
+                # Put the magic libdir with the hardcode flag.
+                hardcode_libdirs="$libdir"
+                libdir="@HARDCODE_LIBDIRS@"
+              else
+                # Just accumulate the unique libdirs.
+		case "$hardcode_libdir_separator$hardcode_libdirs$hardcode_libdir_separator" in
+		*"$hardcode_libdir_separator$libdir$hardcode_libdir_separator"*)
+		  ;;
+		*)
+		  hardcode_libdirs="$hardcode_libdirs$hardcode_libdir_separator$libdir"
+		  ;;
+		esac
+                libdir=
+              fi
+            fi
+
+            if test -n "$libdir"; then
+              eval flag=\"$hardcode_libdir_flag_spec\"
+
+              compile_command="$compile_command $flag"
+              finalize_command="$finalize_command $flag"
+            fi
+          elif test -n "$runpath_var"; then
+            case "$perm_rpath " in
+            *" $libdir "*) ;;
+            *) perm_rpath="$perm_rpath $libdir" ;;
+            esac
+          fi
+	done
+      fi
+
+      # Substitute the hardcoded libdirs into the compile commands.
+      if test -n "$hardcode_libdir_separator"; then
+	compile_command=`$echo "X$compile_command" | $Xsed -e "s%@HARDCODE_LIBDIRS@%$hardcode_libdirs%g"`
+	finalize_command=`$echo "X$finalize_command" | $Xsed -e "s%@HARDCODE_LIBDIRS@%$hardcode_libdirs%g"`
+      fi
+
+      if test -n "$libobjs" && test "$build_old_libs" = yes; then
+        # Transform all the library objects into standard objects.
+        compile_command=`$echo "X$compile_command " | $Xsed -e "$los2o" -e 's/ $//'`
+        finalize_command=`$echo "X$finalize_command " | $Xsed -e "$los2o" -e 's/ $//'`
+      fi
+
+      if test "$export_dynamic" = yes && test -n "$NM" && test -n "$global_symbol_pipe"; then
+        dlsyms="${output}S.c"
+      else
+        dlsyms=
+      fi
+
+      if test -n "$dlsyms"; then
+        # Add our own program objects to the preloaded list.
+        dlprefiles=`$echo "X$objs$dlprefiles " | $Xsed -e "$los2o" -e 's/ $//'`
+
+	# Discover the nlist of each of the dlfiles.
+        nlist="$objdir/${output}.nm"
+
+	if test -d $objdir; then
+	  $show "$rm $nlist ${nlist}T"
+	  $run $rm "$nlist" "${nlist}T"
+	else
+	  $show "$mkdir $objdir"
+	  $run $mkdir $objdir
+	  status=$?
+	  if test $status -ne 0 && test ! -d $objdir; then
+	    exit $status
+	  fi
+	fi
+
+        for arg in $dlprefiles; do
+	  $show "extracting global C symbols from \`$arg'"
+	  $run eval "$NM $arg | $global_symbol_pipe >> '$nlist'"
+        done
+
+        # Parse the name list into a source file.
+        $show "creating $objdir/$dlsyms"
+        if test -z "$run"; then
+	  # Make sure we at least have an empty file.
+	  test -f "$nlist" || : > "$nlist"
+
+	  # Try sorting and uniquifying the output.
+	  if sort "$nlist" | uniq > "$nlist"T; then
+	    mv -f "$nlist"T "$nlist"
+	    wcout=`wc "$nlist" 2>/dev/null`
+	    count=`echo "X$wcout" | $Xsed -e 's/^[ 	]*\([0-9][0-9]*\).*$/\1/'`
+	    (test "$count" -ge 0) 2>/dev/null || count=-1
+	  else
+	    $rm "$nlist"T
+	    count=-1
+	  fi
+
+	  case "$dlsyms" in
+	  "") ;;
+	  *.c)
+	    $echo > "$objdir/$dlsyms" "\
+/* $dlsyms - symbol resolution table for \`$output' dlsym emulation. */
+/* Generated by $PROGRAM - GNU $PACKAGE $VERSION */
+
+#ifdef __cplusplus
+extern \"C\" {
+#endif
+
+/* Prevent the only kind of declaration conflicts we can make. */
+#define dld_preloaded_symbol_count some_other_symbol
+#define dld_preloaded_symbols some_other_symbol
+
+/* External symbol declarations for the compiler. */\
+"
+
+	    if test -f "$nlist"; then
+	      sed -e 's/^.* \(.*\)$/extern char \1;/' < "$nlist" >> "$objdir/$dlsyms"
+	    else
+	      echo '/* NONE */' >> "$objdir/$dlsyms"
+	    fi
+
+	    $echo >> "$objdir/$dlsyms" "\
+
+#undef dld_preloaded_symbol_count
+#undef dld_preloaded_symbols
+
+#if defined (__STDC__) && __STDC__
+# define __ptr_t void *
+#else
+# define __ptr_t char *
+#endif
+
+/* The number of symbols in dld_preloaded_symbols, -1 if unsorted. */
+int dld_preloaded_symbol_count = $count;
+
+/* The mapping between symbol names and symbols. */
+struct {
+  char *name;
+  __ptr_t address;
+}
+dld_preloaded_symbols[] =
+{\
+"
+
+	    if test -f "$nlist"; then
+	      sed 's/^\(.*\) \(.*\)$/  {"\1", (__ptr_t) \&\2},/' < "$nlist" >> "$objdir/$dlsyms"
+	    fi
+
+	    $echo >> "$objdir/$dlsyms" "\
+  {0, (__ptr_t) 0}
+};
+
+#ifdef __cplusplus
+}
+#endif\
+"
+	    ;;
+
+	  *)
+	    $echo "$modename: unknown suffix for \`$dlsyms'" 1>&2
+	    exit 1
+	    ;;
+	  esac
+        fi
+
+        # Now compile the dynamic symbol file.
+        $show "(cd $objdir && $CC -c$no_builtin_flag \"$dlsyms\")"
+        $run eval '(cd $objdir && $CC -c$no_builtin_flag "$dlsyms")' || exit $?
+
+        # Transform the symbol file into the correct name.
+        compile_command=`$echo "X$compile_command" | $Xsed -e "s%@SYMFILE@%$objdir/${output}S.${objext}%"`
+        finalize_command=`$echo "X$finalize_command" | $Xsed -e "s%@SYMFILE@%$objdir/${output}S.${objext}%"`
+      elif test "$export_dynamic" != yes; then
+        test -n "$dlfiles$dlprefiles" && $echo "$modename: warning: \`-dlopen' and \`-dlpreopen' are ignored without \`-export-dynamic'" 1>&2
+      else
+        # We keep going just in case the user didn't refer to
+        # dld_preloaded_symbols.  The linker will fail if global_symbol_pipe
+        # really was required.
+        $echo "$modename: not configured to extract global symbols from dlpreopened files" 1>&2
+
+        # Nullify the symbol file.
+        compile_command=`$echo "X$compile_command" | $Xsed -e "s% @SYMFILE@%%"`
+        finalize_command=`$echo "X$finalize_command" | $Xsed -e "s% @SYMFILE@%%"`
+      fi
+
+      if test -z "$link_against_libtool_libs" || test "$build_libtool_libs" != yes; then
+        # Replace the output file specification.
+        compile_command=`$echo "X$compile_command" | $Xsed -e 's%@OUTPUT@%'"$output"'%g'`
+        finalize_command=`$echo "X$finalize_command" | $Xsed -e 's%@OUTPUT@%'"$output"'%g'`
+
+        # We have no uninstalled library dependencies, so finalize right now.
+        $show "$compile_command"
+        $run eval "$compile_command"
+        exit $?
+      fi
+
+      # Replace the output file specification.
+      compile_command=`$echo "X$compile_command" | $Xsed -e 's%@OUTPUT@%'"$objdir/$output"'%g'`
+      finalize_command=`$echo "X$finalize_command" | $Xsed -e 's%@OUTPUT@%'"$objdir/$output"'T%g'`
+
+      # Create the binary in the object directory, then wrap it.
+      if test ! -d $objdir; then
+        $show "$mkdir $objdir"
+	$run $mkdir $objdir
+	status=$?
+	if test $status -ne 0 && test ! -d $objdir; then
+	  exit $status
+	fi
+      fi
+
+      if test -n "$shlibpath_var"; then
+        # We should set the shlibpath_var
+        rpath=
+        for dir in $temp_rpath; do
+          case "$dir" in
+          /* | [A-Za-z]:[/\\]*)
+            # Absolute path.
+            rpath="$rpath$dir:"
+            ;;
+          *)
+            # Relative path: add a thisdir entry.
+            rpath="$rpath\$thisdir/$dir:"
+            ;;
+          esac
+        done
+        temp_rpath="$rpath"
+      fi
+
+      # Delete the old output file.
+      $run $rm $output
+
+      if test -n "$compile_shlibpath"; then
+        compile_command="$shlibpath_var=\"$compile_shlibpath\$$shlibpath_var\" $compile_command"
+      fi
+      if test -n "$finalize_shlibpath"; then
+        finalize_command="$shlibpath_var=\"$finalize_shlibpath\$$shlibpath_var\" $finalize_command"
+      fi
+
+      if test -n "$runpath_var" && test -n "$perm_rpath"; then
+        # We should set the runpath_var.
+        rpath=
+        for dir in $perm_rpath; do
+          rpath="$rpath$dir:"
+        done
+        compile_command="$runpath_var=\"$rpath\$$runpath_var\" $compile_command"
+        finalize_command="$runpath_var=\"$rpath\$$runpath_var\" $finalize_command"
+      fi
+
+      if test "$hardcode_action" = relink; then
+        # AGH! Flame the AIX and HP-UX people for me, will ya?
+        $echo "$modename: warning: using a buggy system linker" 1>&2
+        $echo "$modename: relinking will be required before \`$output' can be installed" 1>&2
+      fi
+
+      $show "$compile_command"
+      $run eval "$compile_command" || exit $?
+
+      # Now create the wrapper script.
+      $show "creating $output"
+
+      # Quote the finalize command for shipping.
+      finalize_command=`$echo "X$finalize_command" | $Xsed -e "$sed_quote_subst"`
+
+      # Quote $echo for shipping.
+      qecho=`$echo "X$echo" | $Xsed -e "$sed_quote_subst"`
+
+      # Only actually do things if our run command is non-null.
+      if test -z "$run"; then
+        $rm $output
+        trap "$rm $output; exit 1" 1 2 15
+
+        $echo > $output "\
+#! $SHELL
+
+# $output - temporary wrapper script for $objdir/$output
+# Generated by $PROGRAM - GNU $PACKAGE $VERSION
+#
+# The $output program cannot be directly executed until all the libtool
+# libraries that it depends on are installed.
+#
+# This wrapper script should never be moved out of \``pwd`'.
+# If it is, it will not operate correctly.
+
+# Sed substitution that helps us do robust quoting.  It backslashifies
+# metacharacters that are still active within double-quoted strings.
+Xsed='sed -e s/^X//'
+sed_quote_subst='$sed_quote_subst'
+
+# The HP-UX ksh and POSIX shell print the target directory to stdout
+# if CDPATH is set.
+if test \"\${CDPATH+set}\" = set; then CDPATH=; export CDPATH; fi
+
+# This environment variable determines our operation mode.
+if test \"\$libtool_install_magic\" = \"$magic\"; then
+  # install mode needs the following variables:
+  link_against_libtool_libs='$link_against_libtool_libs'
+  finalize_command=\"$finalize_command\"
+else
+  # When we are sourced in execute mode, \$file and \$echo are already set.
+  if test \"\$libtool_execute_magic\" != \"$magic\"; then
+    echo=\"$qecho\"
+    file=\"\$0\"
+    # Make sure echo works.
+    if test \"X\$1\" = X--no-reexec; then
+      # Discard the --no-reexec flag, and continue.
+      shift
+    elif test \"X\`(\$echo '\t') 2>/dev/null\`\" = 'X\t'; then
+      # Yippee, \$echo works!
+      :
+    else
+      # Restart under the correct shell, and then maybe \$echo will work.
+      exec $SHELL \"\$0\" --no-reexec \${1+\"\$@\"}
+    fi
+  fi\
+"
+        $echo >> $output "\
+
+  # Find the directory that this script lives in.
+  thisdir=\`\$echo \"X\$file\" | \$Xsed -e 's%/[^/]*$%%'\`
+  test \"x\$thisdir\" = \"x\$file\" && thisdir=.
+
+  # Follow symbolic links until we get to the real thisdir.
+  file=\`ls -ld \"\$file\" | sed -n 's/.*-> //p'\`
+  while test -n \"\$file\"; do
+    destdir=\`\$echo \"X\$file\" | \$Xsed -e 's%/[^/]*\$%%'\`
+
+    # If there was a directory component, then change thisdir.
+    if test \"x\$destdir\" != \"x\$file\"; then
+      case \"\$destdir\" in
+      /* | [A-Za-z]:[/\\]*) thisdir=\"\$destdir\" ;;
+      *) thisdir=\"\$thisdir/\$destdir\" ;;
+      esac
+    fi
+
+    file=\`\$echo \"X\$file\" | \$Xsed -e 's%^.*/%%'\`
+    file=\`ls -ld \"\$thisdir/\$file\" | sed -n 's/.*-> //p'\`
+  done
+
+  # Try to get the absolute directory name.
+  absdir=\`cd \"\$thisdir\" && pwd\`
+  test -n \"\$absdir\" && thisdir=\"\$absdir\"
+
+  progdir=\"\$thisdir/$objdir\"
+  program='$output'
+
+  if test -f \"\$progdir/\$program\"; then"
+
+        # Export our shlibpath_var if we have one.
+        if test -n "$shlibpath_var" && test -n "$temp_rpath"; then
+          $echo >> $output "\
+    # Add our own library path to $shlibpath_var
+    $shlibpath_var=\"$temp_rpath\$$shlibpath_var\"
+
+    # Some systems cannot cope with colon-terminated $shlibpath_var
+    $shlibpath_var=\`\$echo \"X\$$shlibpath_var\" | \$Xsed -e 's/:*\$//'\`
+
+    export $shlibpath_var
+"
+        fi
+
+        $echo >> $output "\
+    if test \"\$libtool_execute_magic\" != \"$magic\"; then
+      # Run the actual program with our arguments.
+
+      # Export the path to the program.
+      PATH=\"\$progdir:\$PATH\"
+      export PATH
+
+      exec \$program \${1+\"\$@\"}
+
+      \$echo \"\$0: cannot exec \$program \${1+\"\$@\"}\"
+      exit 1
+    fi
+  else
+    # The program doesn't exist.
+    \$echo \"\$0: error: \$progdir/\$program does not exist\" 1>&2
+    \$echo \"This script is just a wrapper for \$program.\" 1>&2
+    echo \"See the $PACKAGE documentation for more information.\" 1>&2
+    exit 1
+  fi
+fi\
+"
+        chmod +x $output
+      fi
+      exit 0
+      ;;
+    esac
+
+    # See if we need to build an old-fashioned archive.
+    for oldlib in $oldlibs; do
+
+      if test "$build_libtool_libs" = convenience; then
+	oldobjs="$libobjs"
+	addlibs="$convenience"
+	build_libtool_libs=no
+      else
+	oldobjs="$objs"`$echo "X$libobjs " | $Xsed -e 's/[^   ]*\.a //g' -e 's/[^   ]*\.lib //g' -e "$los2o" -e 's/ $//g'`
+	addlibs="$old_convenience"
+      fi
+
+      # Add in members from convenience archives.
+      for xlib in $addlibs; do
+	# Extract the objects.
+	xdir="$xlib"x
+	generated="$generated $xdir"
+	xlib=`echo "$xlib" | $Xsed -e 's%^.*/%%'`
+
+	$show "${rm}r $xdir"
+	$run ${rm}r "$xdir"
+	$show "mkdir $xdir"
+	$run mkdir "$xdir"
+	status=$?
+	if test $status -ne 0 && test ! -d "$xdir"; then
+	  exit $status
+	fi
+	$show "(cd $xdir && $AR x ../$xlib)"
+	$run eval "(cd \$xdir && $AR x ../\$xlib)" || exit $?
+
+	oldobjs="$oldobjs `echo $xdir/*`"
+      done
+
+      # Do each command in the archive commands.
+      if test "$build_old_libs" = yes
+      then
+        if test -n "$old_archive_from_new_cmds" && test "$build_libtool_libs" = yes; then
+	  eval cmds=\"$old_archive_from_new_cmds\"
+	else
+	  eval cmds=\"$old_archive_cmds\"
+	fi
+	IFS="${IFS= 	}"; save_ifs="$IFS"; IFS=';'
+	for cmd in $cmds; do
+	  IFS="$save_ifs"
+	  $show "$cmd"
+	  $run eval "$cmd" || exit $?
+	done
+	IFS="$save_ifs"
+      fi
+    done
+
+    if test -n "$generated"; then
+      $show "${rm}r$generated"
+      $run ${rm}r$generated
+    fi
+
+    # Now create the libtool archive.
+    case "$output" in
+    *.la)
+      old_library=
+      test "$build_old_libs" = yes && old_library="$libname.$libext"
+      $show "creating $output"
+
+      # Only create the output if not a dry run.
+      if test -z "$run"; then
+        $echo > $output "\
+# $output - a libtool library file
+# Generated by $PROGRAM - GNU $PACKAGE $VERSION
+
+# The name that we can dlopen(3).
+dlname='$dlname'
+
+# Names of this library.
+library_names='$library_names'
+
+# The name of the static archive.
+old_library='$old_library'
+
+# Libraries that this one depends upon.
+dependency_libs='$dependency_libs'
+
+# Version information for $libname.
+current=$current
+age=$age
+revision=$revision
+
+# Directory that this library needs to be installed in:
+libdir='$install_libdir'\
+"
+      fi
+
+      # Do a symbolic link so that the libtool archive can be found in
+      # LD_LIBRARY_PATH before the program is installed.
+      $show "(cd $objdir && $LN_S ../$output $output)"
+      $run eval "(cd $objdir && $LN_S ../$output $output)" || exit $?
+      ;;
+    esac
+    exit 0
+    ;;
+
+  # libtool install mode
+  install)
+    modename="$modename: install"
+
+    # There may be an optional sh(1) argument at the beginning of
+    # install_prog (especially on Windows NT).
+    if test "$nonopt" = "$SHELL" || test "$nonopt" = "/bin/sh"; then
+      # Aesthetically quote it.
+      arg=`$echo "X$nonopt" | $Xsed -e "$sed_quote_subst"`
+      case "$arg" in
+      *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \	]*|*]*)
+	arg="\"$arg\""
+	;;
+      esac
+      install_prog="$arg "
+      arg="$1"
+      shift
+    else
+      install_prog=
+      arg="$nonopt"
+    fi
+
+    # The real first argument should be the name of the installation program.
+    # Aesthetically quote it.
+    arg=`$echo "X$arg" | $Xsed -e "$sed_quote_subst"`
+    case "$arg" in
+    *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \	]*|*]*)
+      arg="\"$arg\""
+      ;;
+    esac
+    install_prog="$install_prog$arg"
+
+    # We need to accept at least all the BSD install flags.
+    dest=
+    files=
+    opts=
+    prev=
+    install_type=
+    isdir=no
+    stripme=
+    for arg
+    do
+      if test -n "$dest"; then
+        files="$files $dest"
+        dest="$arg"
+        continue
+      fi
+
+      case "$arg" in
+      -d) isdir=yes ;;
+      -f) prev="-f" ;;
+      -g) prev="-g" ;;
+      -m) prev="-m" ;;
+      -o) prev="-o" ;;
+      -s)
+        stripme=" -s"
+        continue
+        ;;
+      -*) ;;
+
+      *)
+        # If the previous option needed an argument, then skip it.
+        if test -n "$prev"; then
+          prev=
+        else
+          dest="$arg"
+          continue
+        fi
+        ;;
+      esac
+
+      # Aesthetically quote the argument.
+      arg=`$echo "X$arg" | $Xsed -e "$sed_quote_subst"`
+      case "$arg" in
+      *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \	]*|*]*)
+	arg="\"$arg\""
+	;;
+      esac
+      install_prog="$install_prog $arg"
+    done
+
+    if test -z "$install_prog"; then
+      $echo "$modename: you must specify an install program" 1>&2
+      $echo "$help" 1>&2
+      exit 1
+    fi
+
+    if test -n "$prev"; then
+      $echo "$modename: the \`$prev' option requires an argument" 1>&2
+      $echo "$help" 1>&2
+      exit 1
+    fi
+
+    if test -z "$files"; then
+      if test -z "$dest"; then
+        $echo "$modename: no file or destination specified" 1>&2
+      else
+        $echo "$modename: you must specify a destination" 1>&2
+      fi
+      $echo "$help" 1>&2
+      exit 1
+    fi
+
+    # Strip any trailing slash from the destination.
+    dest=`$echo "X$dest" | $Xsed -e 's%/$%%'`
+
+    # Check to see that the destination is a directory.
+    test -d "$dest" && isdir=yes
+    if test "$isdir" = yes; then
+      destdir="$dest"
+      destname=
+    else
+      destdir=`$echo "X$dest" | $Xsed -e 's%/[^/]*$%%'`
+      test "X$destdir" = "X$dest" && destdir=.
+      destname=`$echo "X$dest" | $Xsed -e 's%^.*/%%'`
+
+      # Not a directory, so check to see that there is only one file specified.
+      set dummy $files
+      if test $# -gt 2; then
+        $echo "$modename: \`$dest' is not a directory" 1>&2
+        $echo "$help" 1>&2
+        exit 1
+      fi
+    fi
+    case "$destdir" in
+    /* | [A-Za-z]:[/\\]*) ;;
+    *)
+      for file in $files; do
+        case "$file" in
+        *.lo) ;;
+        *)
+          $echo "$modename: \`$destdir' must be an absolute directory name" 1>&2
+          $echo "$help" 1>&2
+          exit 1
+          ;;
+        esac
+      done
+      ;;
+    esac
+
+    # This variable tells wrapper scripts just to set variables rather
+    # than running their programs.
+    libtool_install_magic="$magic"
+
+    staticlibs=
+    future_libdirs=
+    current_libdirs=
+    for file in $files; do
+
+      # Do each installation.
+      case "$file" in
+      *.a | *.lib)
+        # Do the static libraries later.
+        staticlibs="$staticlibs $file"
+        ;;
+
+      *.la)
+        # Check to see that this really is a libtool archive.
+        if (sed -e '2q' $file | egrep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then :
+        else
+          $echo "$modename: \`$file' is not a valid libtool archive" 1>&2
+          $echo "$help" 1>&2
+          exit 1
+        fi
+
+        library_names=
+        old_library=
+        # If there is no directory component, then add one.
+        case "$file" in
+        */* | *\\*) . $file ;;
+        *) . ./$file ;;
+        esac
+
+        # Add the libdir to current_libdirs if it is the destination.
+        if test "X$destdir" = "X$libdir"; then
+          case "$current_libdirs " in
+          *" $libdir "*) ;;
+          *) current_libdirs="$current_libdirs $libdir" ;;
+          esac
+        else
+          # Note the libdir as a future libdir.
+          case "$future_libdirs " in
+          *" $libdir "*) ;;
+          *) future_libdirs="$future_libdirs $libdir" ;;
+          esac
+        fi
+
+        dir="`$echo "X$file" | $Xsed -e 's%/[^/]*$%%'`/"
+        test "X$dir" = "X$file/" && dir=
+        dir="$dir$objdir"
+
+        # See the names of the shared library.
+        set dummy $library_names
+        if test -n "$2"; then
+          realname="$2"
+          shift
+          shift
+
+          # Install the shared library and build the symlinks.
+          $show "$install_prog $dir/$realname $destdir/$realname"
+          $run eval "$install_prog $dir/$realname $destdir/$realname" || exit $?
+          test "X$dlname" = "X$realname" && dlname=
+
+          if test $# -gt 0; then
+            # Delete the old symlinks.
+            rmcmd="$rm"
+            for linkname
+            do
+	      if test "X$linkname" != "X$realname"; then
+                rmcmd="$rmcmd $destdir/$linkname"
+	      fi
+            done
+            $show "$rmcmd"
+            $run $rmcmd
+
+            # ... and create new ones.
+            for linkname
+            do
+	      if test "X$linkname" != "X$realname"; then
+                test "X$dlname" = "X$linkname" && dlname=
+                $show "(cd $destdir && $LN_S $realname $linkname)"
+                $run eval "(cd $destdir && $LN_S $realname $linkname)"
+	      fi
+            done
+          fi
+
+          if test -n "$dlname"; then
+            # Install the dynamically-loadable library.
+            $show "$install_prog $dir/$dlname $destdir/$dlname"
+            $run eval "$install_prog $dir/$dlname $destdir/$dlname" || exit $?
+          fi
+
+          # Do each command in the postinstall commands.
+          lib="$destdir/$realname"
+          eval cmds=\"$postinstall_cmds\"
+          IFS="${IFS= 	}"; save_ifs="$IFS"; IFS=';'
+          for cmd in $cmds; do
+            IFS="$save_ifs"
+            $show "$cmd"
+            $run eval "$cmd" || exit $?
+          done
+          IFS="$save_ifs"
+        fi
+
+        # Install the pseudo-library for information purposes.
+        name=`$echo "X$file" | $Xsed -e 's%^.*/%%'`
+        $show "$install_prog $file $destdir/$name"
+        $run eval "$install_prog $file $destdir/$name" || exit $?
+
+        # Maybe install the static library, too.
+        test -n "$old_library" && staticlibs="$staticlibs $dir/$old_library"
+        ;;
+
+      *.lo)
+        # Install (i.e. copy) a libtool object.
+
+        # Figure out destination file name, if it wasn't already specified.
+        if test -n "$destname"; then
+          destfile="$destdir/$destname"
+        else
+          destfile=`$echo "X$file" | $Xsed -e 's%^.*/%%'`
+          destfile="$destdir/$destfile"
+        fi
+
+        # Deduce the name of the destination old-style object file.
+        case "$destfile" in
+        *.lo)
+          staticdest=`$echo "X$destfile" | $Xsed -e "$lo2o"`
+          ;;
+        *.o | *.obj)
+          staticdest="$destfile"
+          destfile=
+          ;;
+        *)
+          $echo "$modename: cannot copy a libtool object to \`$destfile'" 1>&2
+          $echo "$help" 1>&2
+          exit 1
+          ;;
+        esac
+
+        # Install the libtool object if requested.
+        if test -n "$destfile"; then
+          $show "$install_prog $file $destfile"
+          $run eval "$install_prog $file $destfile" || exit $?
+        fi
+
+        # Install the old object if enabled.
+        if test "$build_old_libs" = yes; then
+          # Deduce the name of the old-style object file.
+          staticobj=`$echo "X$file" | $Xsed -e "$lo2o"`
+
+          $show "$install_prog $staticobj $staticdest"
+          $run eval "$install_prog \$staticobj \$staticdest" || exit $?
+        fi
+        exit 0
+        ;;
+
+      *)
+        # Figure out destination file name, if it wasn't already specified.
+        if test -n "$destname"; then
+          destfile="$destdir/$destname"
+        else
+          destfile=`$echo "X$file" | $Xsed -e 's%^.*/%%'`
+          destfile="$destdir/$destfile"
+        fi
+
+        # Do a test to see if this is really a libtool program.
+        if (sed -e '4q' $file | egrep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then
+          link_against_libtool_libs=
+          finalize_command=
+
+          # If there is no directory component, then add one.
+          case "$file" in
+          */* | *\\*) . $file ;;
+          *) . ./$file ;;
+          esac
+
+          # Check the variables that should have been set.
+          if test -z "$link_against_libtool_libs" || test -z "$finalize_command"; then
+            $echo "$modename: invalid libtool wrapper script \`$file'" 1>&2
+            exit 1
+          fi
+
+          finalize=yes
+          for lib in $link_against_libtool_libs; do
+            # Check to see that each library is installed.
+            libdir=
+            if test -f "$lib"; then
+              # If there is no directory component, then add one.
+              case "$lib" in
+              */* | *\\*) . $lib ;;
+              *) . ./$lib ;;
+              esac
+            fi
+            libfile="$libdir/`$echo "X$lib" | $Xsed -e 's%^.*/%%g'`"
+            if test -n "$libdir" && test ! -f "$libfile"; then
+              $echo "$modename: warning: \`$lib' has not been installed in \`$libdir'" 1>&2
+              finalize=no
+            fi
+          done
+
+          if test "$hardcode_action" = relink; then
+            if test "$finalize" = yes; then
+              $echo "$modename: warning: relinking \`$file' on behalf of your buggy system linker" 1>&2
+              $show "$finalize_command"
+              if $run eval "$finalize_command"; then :
+              else
+                $echo "$modename: error: relink \`$file' with the above command before installing it" 1>&2
+                continue
+              fi
+              file="$objdir/$file"T
+            else
+              $echo "$modename: warning: cannot relink \`$file' on behalf of your buggy system linker" 1>&2
+            fi
+          else
+            # Install the binary that we compiled earlier.
+	    file=`$echo "X$file" | $Xsed -e "s%\([^/]*\)$%$objdir/\1%"`
+          fi
+        fi
+
+        $show "$install_prog$stripme $file $destfile"
+        $run eval "$install_prog\$stripme \$file \$destfile" || exit $?
+        ;;
+      esac
+    done
+
+    for file in $staticlibs; do
+      name=`$echo "X$file" | $Xsed -e 's%^.*/%%'`
+
+      # Set up the ranlib parameters.
+      oldlib="$destdir/$name"
+
+      $show "$install_prog $file $oldlib"
+      $run eval "$install_prog \$file \$oldlib" || exit $?
+
+      # Do each command in the postinstall commands.
+      eval cmds=\"$old_postinstall_cmds\"
+      IFS="${IFS= 	}"; save_ifs="$IFS"; IFS=';'
+      for cmd in $cmds; do
+        IFS="$save_ifs"
+        $show "$cmd"
+        $run eval "$cmd" || exit $?
+      done
+      IFS="$save_ifs"
+    done
+
+    if test -n "$future_libdirs"; then
+      $echo "$modename: warning: remember to run \`$progname --finish$future_libdirs'" 1>&2
+    fi
+
+    if test -n "$current_libdirs"; then
+      # Maybe just do a dry run.
+      test -n "$run" && current_libdirs=" -n$current_libdirs"
+      exec $SHELL $0 --finish$current_libdirs
+      exit 1
+    fi
+
+    exit 0
+    ;;
+
+  # libtool finish mode
+  finish)
+    modename="$modename: finish"
+    libdirs="$nonopt"
+    admincmds=
+
+    if test -n "$finish_cmds$finish_eval" && test -n "$libdirs"; then
+      for dir
+      do
+        libdirs="$libdirs $dir"
+      done
+
+      for libdir in $libdirs; do
+	if test -n "$finish_cmds"; then
+	  # Do each command in the finish commands.
+	  eval cmds=\"$finish_cmds\"
+          IFS="${IFS= 	}"; save_ifs="$IFS"; IFS=';'
+          for cmd in $cmds; do
+            IFS="$save_ifs"
+            $show "$cmd"
+            $run eval "$cmd" || admincmds="$admincmds
+       $cmd"
+          done
+          IFS="$save_ifs"
+	fi
+	if test -n "$finish_eval"; then
+	  # Do the single finish_eval.
+	  eval cmds=\"$finish_eval\"
+	  $run eval "$cmds" || admincmds="$admincmds
+       $cmds"
+	fi
+      done
+    fi
+
+    echo "----------------------------------------------------------------------"
+    echo "Libraries have been installed in:"
+    for libdir in $libdirs; do
+      echo "   $libdir"
+    done
+    echo
+    echo "To link against installed libraries in a given directory, LIBDIR,"
+    echo "you must use the \`-LLIBDIR' flag during linking."
+    echo
+    echo " You will also need to do at least one of the following:"
+    if test -n "$shlibpath_var"; then
+      echo "   - add LIBDIR to the \`$shlibpath_var' environment variable"
+      echo "     during execution"
+    fi
+    if test -n "$runpath_var"; then
+      echo "   - add LIBDIR to the \`$runpath_var' environment variable"
+      echo "     during linking"
+    fi
+    if test -n "$hardcode_libdir_flag_spec"; then
+      libdir=LIBDIR
+      eval flag=\"$hardcode_libdir_flag_spec\"
+
+      echo "   - use the \`$flag' linker flag"
+    fi
+    if test -n "$admincmds"; then
+      echo "   - have your system administrator run these commands:$admincmds"
+    fi
+    if test -f /etc/ld.so.conf; then
+      echo "   - have your system administrator add LIBDIR to \`/etc/ld.so.conf'"
+    fi
+    echo
+    echo "See any operating system documentation about shared libraries for"
+    echo "more information, such as the ld(1) and ld.so(8) manual pages."
+    echo "----------------------------------------------------------------------"
+    exit 0
+    ;;
+
+  # libtool execute mode
+  execute)
+    modename="$modename: execute"
+
+    # The first argument is the command name.
+    cmd="$nonopt"
+    if test -z "$cmd"; then
+      $echo "$modename: you must specify a COMMAND" 1>&2
+      $echo "$help"
+      exit 1
+    fi
+
+    # Handle -dlopen flags immediately.
+    for file in $execute_dlfiles; do
+      if test ! -f "$file"; then
+	$echo "$modename: \`$file' is not a file" 1>&2
+	$echo "$help" 1>&2
+	exit 1
+      fi
+
+      dir=
+      case "$file" in
+      *.la)
+        # Check to see that this really is a libtool archive.
+        if (sed -e '2q' $file | egrep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then :
+        else
+          $echo "$modename: \`$lib' is not a valid libtool archive" 1>&2
+          $echo "$help" 1>&2
+          exit 1
+        fi
+
+	# Read the libtool library.
+	dlname=
+	library_names=
+
+        # If there is no directory component, then add one.
+	case "$file" in
+	*/* | *\\*) . $file ;;
+        *) . ./$file ;;
+	esac
+
+	# Skip this library if it cannot be dlopened.
+	if test -z "$dlname"; then
+	  # Warn if it was a shared library.
+	  test -n "$library_names" && $echo "$modename: warning: \`$file' was not linked with \`-export-dynamic'"
+	  continue
+	fi
+
+	dir=`$echo "X$file" | $Xsed -e 's%/[^/]*$%%'`
+	test "X$dir" = "X$file" && dir=.
+
+	if test -f "$dir/$objdir/$dlname"; then
+	  dir="$dir/$objdir"
+	else
+	  $echo "$modename: cannot find \`$dlname' in \`$dir' or \`$dir/$objdir'" 1>&2
+	  exit 1
+	fi
+	;;
+
+      *.lo)
+	# Just add the directory containing the .lo file.
+	dir=`$echo "X$file" | $Xsed -e 's%/[^/]*$%%'`
+	test "X$dir" = "X$file" && dir=.
+	;;
+
+      *)
+	$echo "$modename: warning \`-dlopen' is ignored for non-libtool libraries and objects" 1>&2
+        continue
+	;;
+      esac
+
+      # Get the absolute pathname.
+      absdir=`cd "$dir" && pwd`
+      test -n "$absdir" && dir="$absdir"
+
+      # Now add the directory to shlibpath_var.
+      if eval "test -z \"\$$shlibpath_var\""; then
+	eval "$shlibpath_var=\"\$dir\""
+      else
+	eval "$shlibpath_var=\"\$dir:\$$shlibpath_var\""
+      fi
+    done
+
+    # This variable tells wrapper scripts just to set shlibpath_var
+    # rather than running their programs.
+    libtool_execute_magic="$magic"
+
+    # Check if any of the arguments is a wrapper script.
+    args=
+    for file
+    do
+      case "$file" in
+      -*) ;;
+      *)
+        # Do a test to see if this is really a libtool program.
+        if (sed -e '4q' $file | egrep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then
+	  # If there is no directory component, then add one.
+	  case "$file" in
+	  */* | *\\*) . $file ;;
+	  *) . ./$file ;;
+	  esac
+
+	  # Transform arg to wrapped name.
+	  file="$progdir/$program"
+	fi
+        ;;
+      esac
+      # Quote arguments (to preserve shell metacharacters).
+      file=`$echo "X$file" | $Xsed -e "$sed_quote_subst"`
+      args="$args \"$file\""
+    done
+
+    if test -z "$run"; then
+      # Export the shlibpath_var.
+      eval "export $shlibpath_var"
+
+      # Restore saved enviroment variables
+      if test "${save_LC_ALL+set}" = set; then
+        LC_ALL="$save_LC_ALL"; export LC_ALL
+      fi
+      if test "${save_LANG+set}" = set; then
+        LANG="$save_LANG"; export LANG
+      fi
+
+      # Now actually exec the command.
+      eval "exec \$cmd$args"
+
+      $echo "$modename: cannot exec \$cmd$args"
+      exit 1
+    else
+      # Display what would be done.
+      eval "\$echo \"\$shlibpath_var=\$$shlibpath_var\""
+      $echo "export $shlibpath_var"
+      $echo "$cmd$args"
+      exit 0
+    fi
+    ;;
+
+  # libtool uninstall mode
+  uninstall)
+    modename="$modename: uninstall"
+    rm="$nonopt"
+    files=
+
+    for arg
+    do
+      case "$arg" in
+      -*) rm="$rm $arg" ;;
+      *) files="$files $arg" ;;
+      esac
+    done
+
+    if test -z "$rm"; then
+      $echo "$modename: you must specify an RM program" 1>&2
+      $echo "$help" 1>&2
+      exit 1
+    fi
+
+    for file in $files; do
+      dir=`$echo "X$file" | $Xsed -e 's%/[^/]*$%%'`
+      test "X$dir" = "X$file" && dir=.
+      name=`$echo "X$file" | $Xsed -e 's%^.*/%%'`
+
+      rmfiles="$file"
+
+      case "$name" in
+      *.la)
+        # Possibly a libtool archive, so verify it.
+        if (sed -e '2q' $file | egrep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then
+          . $dir/$name
+
+          # Delete the libtool libraries and symlinks.
+          for n in $library_names; do
+            rmfiles="$rmfiles $dir/$n"
+            test "X$n" = "X$dlname" && dlname=
+          done
+          test -n "$dlname" && rmfiles="$rmfiles $dir/$dlname"
+          test -n "$old_library" && rmfiles="$rmfiles $dir/$old_library"
+
+	  $show "$rm $rmfiles"
+	  $run $rm $rmfiles
+
+	  if test -n "$library_names"; then
+	    # Do each command in the postuninstall commands.
+	    eval cmds=\"$postuninstall_cmds\"
+	    IFS="${IFS= 	}"; save_ifs="$IFS"; IFS=';'
+	    for cmd in $cmds; do
+	      IFS="$save_ifs"
+	      $show "$cmd"
+	      $run eval "$cmd"
+	    done
+	    IFS="$save_ifs"
+	  fi
+
+          if test -n "$old_library"; then
+	    # Do each command in the old_postuninstall commands.
+	    eval cmds=\"$old_postuninstall_cmds\"
+	    IFS="${IFS= 	}"; save_ifs="$IFS"; IFS=';'
+	    for cmd in $cmds; do
+	      IFS="$save_ifs"
+	      $show "$cmd"
+	      $run eval "$cmd"
+	    done
+	    IFS="$save_ifs"
+	  fi
+
+          # FIXME: should reinstall the best remaining shared library.
+        fi
+        ;;
+
+      *.lo)
+        if test "$build_old_libs" = yes; then
+          oldobj=`$echo "X$name" | $Xsed -e "$lo2o"`
+          rmfiles="$rmfiles $dir/$oldobj"
+        fi
+	$show "$rm $rmfiles"
+	$run $rm $rmfiles
+        ;;
+
+      *)
+      	$show "$rm $rmfiles"
+	$run $rm $rmfiles
+	;;
+      esac
+    done
+    exit 0
+    ;;
+
+  "")
+    $echo "$modename: you must specify a MODE" 1>&2
+    $echo "$generic_help" 1>&2
+    exit 1
+    ;;
+  esac
+
+  $echo "$modename: invalid operation mode \`$mode'" 1>&2
+  $echo "$generic_help" 1>&2
+  exit 1
+fi # test -z "$show_help"
+
+# We need to display help for each of the modes.
+case "$mode" in
+"") $echo \
+"Usage: $modename [OPTION]... [MODE-ARG]...
+
+Provide generalized library-building support services.
+
+    --config          show all configuration variables
+    --debug           enable verbose shell tracing
+-n, --dry-run         display commands without modifying any files
+    --features        display basic configuration information and exit
+    --finish          same as \`--mode=finish'
+    --help            display this help message and exit
+    --mode=MODE       use operation mode MODE [default=inferred from MODE-ARGS]
+    --quiet           same as \`--silent'
+    --silent          don't print informational messages
+    --version         print version information
+
+MODE must be one of the following:
+
+      compile         compile a source file into a libtool object
+      execute         automatically set library path, then run a program
+      finish          complete the installation of libtool libraries
+      install         install libraries or executables
+      link            create a library or an executable
+      uninstall       remove libraries from an installed directory
+
+MODE-ARGS vary depending on the MODE.  Try \`$modename --help --mode=MODE' for
+a more detailed description of MODE."
+  exit 0
+  ;;
+
+compile)
+  $echo \
+"Usage: $modename [OPTION]... --mode=compile COMPILE-COMMAND... SOURCEFILE
+
+Compile a source file into a libtool library object.
+
+This mode accepts the following additional options:
+
+  -static           always build a \`.o' file suitable for static linking
+
+COMPILE-COMMAND is a command to be used in creating a \`standard' object file
+from the given SOURCEFILE.
+
+The output file name is determined by removing the directory component from
+SOURCEFILE, then substituting the C source code suffix \`.c' with the
+library object suffix, \`.lo'."
+  ;;
+
+execute)
+  $echo \
+"Usage: $modename [OPTION]... --mode=execute COMMAND [ARGS]...
+
+Automatically set library path, then run a program.
+
+This mode accepts the following additional options:
+
+  -dlopen FILE      add the directory containing FILE to the library path
+
+This mode sets the library path environment variable according to \`-dlopen'
+flags.
+
+If any of the ARGS are libtool executable wrappers, then they are translated
+into their corresponding uninstalled binary, and any of their required library
+directories are added to the library path.
+
+Then, COMMAND is executed, with ARGS as arguments."
+  ;;
+
+finish)
+  $echo \
+"Usage: $modename [OPTION]... --mode=finish [LIBDIR]...
+
+Complete the installation of libtool libraries.
+
+Each LIBDIR is a directory that contains libtool libraries.
+
+The commands that this mode executes may require superuser privileges.  Use
+the \`--dry-run' option if you just want to see what would be executed."
+  ;;
+
+install)
+  $echo \
+"Usage: $modename [OPTION]... --mode=install INSTALL-COMMAND...
+
+Install executables or libraries.
+
+INSTALL-COMMAND is the installation command.  The first component should be
+either the \`install' or \`cp' program.
+
+The rest of the components are interpreted as arguments to that command (only
+BSD-compatible install options are recognized)."
+  ;;
+
+link)
+  $echo \
+"Usage: $modename [OPTION]... --mode=link LINK-COMMAND...
+
+Link object files or libraries together to form another library, or to
+create an executable program.
+
+LINK-COMMAND is a command using the C compiler that you would use to create
+a program from several object files.
+
+The following components of LINK-COMMAND are treated specially:
+
+  -all-static       do not do any dynamic linking at all
+  -dlopen FILE      \`-dlpreopen' FILE if it cannot be dlopened at runtime
+  -dlpreopen FILE   link in FILE and add its symbols to dld_preloaded_symbols
+  -export-dynamic   allow symbols from OUTPUT-FILE to be resolved with dlsym(3)
+  -LLIBDIR          search LIBDIR for required installed libraries
+  -lNAME            OUTPUT-FILE requires the installed library libNAME
+  -no-undefined     declare that a library does not refer to external symbols
+  -o OUTPUT-FILE    create OUTPUT-FILE from the specified objects
+  -release RELEASE  specify package release information
+  -rpath LIBDIR     the created library will eventually be installed in LIBDIR
+  -static           do not do any dynamic linking of libtool libraries
+  -version-info CURRENT[:REVISION[:AGE]]
+                    specify library version info [each variable defaults to 0]
+
+All other options (arguments beginning with \`-') are ignored.
+
+Every other argument is treated as a filename.  Files ending in \`.la' are
+treated as uninstalled libtool libraries, other files are standard or library
+object files.
+
+If the OUTPUT-FILE ends in \`.la', then a libtool library is created, only
+library objects (\`.lo' files) may be specified, and \`-rpath' is required.
+
+If OUTPUT-FILE ends in \`.a' or \`.lib', then a standard library is created
+using \`ar' and \`ranlib', or on WIndows using \`lib'.
+
+If OUTPUT-FILE ends in \`.lo' or \`.${objext}', then a reloadable object file
+is created, otherwise an executable program is created."
+  ;;
+
+uninstall)
+  $echo
+"Usage: $modename [OPTION]... --mode=uninstall RM [RM-OPTION]... FILE...
+
+Remove libraries from an installation directory.
+
+RM is the name of the program to use to delete files associated with each FILE
+(typically \`/bin/rm').  RM-OPTIONS are options (such as \`-f') to be passed
+to RM.
+
+If FILE is a libtool library, all the files associated with it are deleted.
+Otherwise, only FILE itself is deleted using RM."
+  ;;
+
+*)
+  $echo "$modename: invalid operation mode \`$mode'" 1>&2
+  $echo "$help" 1>&2
+  exit 1
+  ;;
+esac
+
+echo
+$echo "Try \`$modename --help' for more information about other modes."
+
+exit 0
+
+# Local Variables:
+# mode:shell-script
+# sh-indentation:2
+# End:
diff --git a/sim/m32r-gx/m32r-sim.h b/sim/m32r-gx/m32r-sim.h
new file mode 100644
index 0000000..e69de29
--- /dev/null
+++ b/sim/m32r-gx/m32r-sim.h
diff --git a/sim/m32r-gx/sim-if.c b/sim/m32r-gx/sim-if.c
new file mode 100644
index 0000000..fcb7f77
--- /dev/null
+++ b/sim/m32r-gx/sim-if.c
@@ -0,0 +1,250 @@
+/* Main simulator entry points for the M32R.
+   Copyright (C) 1996, 1997, 1998 Free Software Foundation, Inc.
+   Contributed by Cygnus Support.
+
+This program is free software; you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation; either version 2, or (at your option)
+any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License along
+with this program; if not, write to the Free Software Foundation, Inc.,
+59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  */
+
+#include "sim-main.h"
+#ifdef HAVE_STDLIB_H
+#include <stdlib.h>
+#endif
+#include "sim-options.h"
+#include "libiberty.h"
+#include "bfd.h"
+#include "sim-assert.h"
+
+
+static void free_state (SIM_DESC);
+
+/* Records simulator descriptor so utilities like m32r_dump_regs can be
+   called from gdb.  */
+SIM_DESC current_state;
+
+/* Cover function of sim_state_free to free the cpu buffers as well.  */
+
+static void
+free_state (SIM_DESC sd)
+{
+  if (STATE_MODULES (sd) != NULL)
+    sim_module_uninstall (sd);
+  sim_cpu_free_all (sd);
+  sim_state_free (sd);
+}
+
+/* Create an instance of the simulator.  */
+
+SIM_DESC
+sim_open (kind, callback, abfd, argv)
+     SIM_OPEN_KIND kind;
+     host_callback *callback;
+     struct _bfd *abfd;
+     char **argv;
+{
+  SIM_DESC sd = sim_state_alloc (kind, callback);
+
+  sim_cpu_alloc_all (sd, 1, 0);
+
+  if (sim_pre_argv_init (sd, argv[0]) != SIM_RC_OK)
+    {
+      free_state (sd);
+      return 0;
+    }
+
+  /* Allocate core managed memory */
+  sim_do_commandf (sd, "memory region 0,0x%lx", M32R_DEFAULT_MEM_SIZE);
+
+  /* getopt will print the error message so we just have to exit if this fails.
+     FIXME: Hmmm...  in the case of gdb we need getopt to call
+     print_filtered.  */
+  if (sim_parse_args (sd, argv) != SIM_RC_OK)
+    {
+      free_state (sd);
+      return 0;
+    }
+
+  /* check for/establish the reference program image */
+  if (sim_analyze_program (sd,
+			   (STATE_PROG_ARGV (sd) != NULL
+			    ? *STATE_PROG_ARGV (sd)
+			    : NULL),
+			   abfd) != SIM_RC_OK)
+    {
+      free_state (sd);
+      return 0;
+    }
+
+  /* Establish any remaining configuration options.  */
+  if (sim_config (sd) != SIM_RC_OK)
+    {
+      free_state (sd);
+      return 0;
+    }
+
+  if (sim_post_argv_init (sd) != SIM_RC_OK)
+    {
+      free_state (sd);
+      return 0;
+    }
+
+  /* Store in a global so things like sparc32_dump_regs can be invoked
+     from the gdb command line.  */
+  current_state = sd;
+  sim_gx_read_block_list();
+  return sd;
+}
+
+void
+sim_close (sd, quitting)
+     SIM_DESC sd;
+     int quitting;
+{
+  sim_gx_write_block_list();
+  sim_module_uninstall (sd);
+}
+
+
+USI
+m32r_h_pc_get (SIM_CPU *current_cpu)
+{
+  return current_cpu->regs.h_pc;
+}
+
+/* Set a value for h-pc.  */
+
+void
+m32r_h_pc_set (SIM_CPU *current_cpu, USI newval)
+{
+  current_cpu->regs.h_pc = newval;
+}
+
+
+SIM_RC
+sim_create_inferior (sd, abfd, argv, envp)
+     SIM_DESC sd;
+     struct _bfd *abfd;
+     char **argv;
+     char **envp;
+{
+  SIM_CPU *current_cpu = STATE_CPU (sd, 0);
+  SIM_ADDR addr;
+
+  CPU_PC_STORE (current_cpu) = m32r_h_pc_set;
+  CPU_PC_FETCH (current_cpu) = m32r_h_pc_get;
+  CPU_REG_STORE (current_cpu) = & abort;
+  CPU_REG_FETCH (current_cpu) = & abort;
+
+  if (abfd != NULL)
+    addr = bfd_get_start_address (abfd);
+  else
+    addr = 0;
+
+  sim_pc_set (current_cpu, addr);
+
+#if 0
+  STATE_ARGV (sd) = sim_copy_argv (argv);
+  STATE_ENVP (sd) = sim_copy_argv (envp);
+#endif
+
+  return SIM_RC_OK;
+}
+
+int
+sim_stop (SIM_DESC sd)
+{
+  sim_io_error(sd, "cannot sim_stop\n");
+}
+
+/* This isn't part of the official interface.
+   This is just a good place to put this for now.  */
+
+void
+sim_sync_stop (SIM_DESC sd, SIM_CPU *cpu, PCADDR pc, enum sim_stop reason, int sigrc)
+{
+  sim_io_error(sd, "cannot sim_stop\n");
+}
+
+void
+sim_resume (sd, step, siggnal)
+     SIM_DESC sd;
+     int step, siggnal;
+{
+  sim_engine *engine = STATE_ENGINE (sd);
+  jmp_buf buf;
+  int jmpval;
+
+  sim_module_resume (sd);
+  ASSERT(step == 0); /* XXX */
+
+  engine->jmpbuf = &buf;
+  jmpval = setjmp (buf);
+  if(jmpval == 0)
+    sim_engine_run(sd, 0, 1, siggnal);
+  engine->jmpbuf = NULL;
+
+  sim_module_suspend (sd);
+}
+
+/* The contents of BUF are in target byte order.  */
+
+int
+sim_fetch_register (sd, rn, buf, length)
+     SIM_DESC sd;
+     int rn;
+     unsigned char *buf;
+     int length;
+{
+  SIM_CPU *cpu = STATE_CPU (sd, 0);
+
+  return (* CPU_REG_FETCH (cpu)) (cpu, rn, buf, length);
+}
+ 
+/* The contents of BUF are in target byte order.  */
+
+int
+sim_store_register (sd, rn, buf, length)
+     SIM_DESC sd;
+     int rn;
+     unsigned char *buf;
+     int length;
+{
+  SIM_CPU *cpu = STATE_CPU (sd, 0);
+
+  return (* CPU_REG_STORE (cpu)) (cpu, rn, buf, length);
+}
+
+void
+sim_do_command (sd, cmd)
+     SIM_DESC sd;
+     char *cmd;
+{ 
+  if (sim_args_command (sd, cmd) != SIM_RC_OK)
+    sim_io_eprintf (sd, "Unknown command `%s'\n", cmd);
+}
+
+/* Utility fns to access registers, without knowing the current mach.  */
+
+SI
+h_gr_get (SIM_CPU *current_cpu, UINT regno)
+{
+  SIM_DESC sd = CURRENT_STATE;
+  sim_io_error(sd, "cannot h_gr_get\n");
+}
+
+void
+h_gr_set (SIM_CPU *current_cpu, UINT regno, SI newval)
+{
+  SIM_DESC sd = CURRENT_STATE;
+  sim_io_error(sd, "cannot h_gr_set\n");
+}
diff --git a/sim/m32r-gx/sim-main.h b/sim/m32r-gx/sim-main.h
new file mode 100644
index 0000000..2d425da
--- /dev/null
+++ b/sim/m32r-gx/sim-main.h
@@ -0,0 +1,94 @@
+/* Main header for the m32r.  */
+
+#define USING_SIM_BASE_H /* FIXME: quick hack */
+
+struct _sim_cpu; /* FIXME: should be in sim-basics.h */
+typedef struct _sim_cpu SIM_CPU;
+
+/* sim-basics.h includes config.h but cgen-types.h must be included before
+   sim-basics.h and cgen-types.h needs config.h.  */
+#include "config.h"
+
+#include "ansidecl.h"
+#include "symcat.h"
+#include "cgen-types.h"
+#include "arch.h"
+#include "sim-basics.h"
+
+/* These must be defined before sim-base.h.  */
+typedef USI sim_cia;
+#define CIA_GET(cpu)     (cpu)->regs.h_pc
+#define CIA_SET(cpu,val) (cpu)->regs.h_pc = (val)
+
+#define TRAP_SYSCALL 0
+
+#include "sim-base.h"
+#include "cpu-sim.h"
+
+#ifdef WANT_CPU_M32R
+#include "cpu.h"
+#include "decode.h"
+#endif
+#include "cpuall.h"
+
+
+/* match with definition in gx-translate.c! */
+typedef struct tgx_cpu_regs 
+{
+  unsigned int h_pc;  /* program counter */
+  signed int h_gr[16];  /* general registers */
+  unsigned int h_cr[16];  /* control registers */
+  long long h_accum;  /* accumulator */
+  unsigned h_lock;  /* lock */
+} tgx_cpu_regs;
+
+/* match with definition in gx-translate.c! */
+typedef struct tgx_syscall_data
+{
+  unsigned pc;
+  unsigned func;
+  unsigned arg1;
+  unsigned arg2;
+  unsigned arg3;
+  unsigned errcode;
+  unsigned result;
+  unsigned result2;
+} tgx_syscall_data;
+
+
+/* match with definition in gx-translate.c! */
+typedef struct tgx_callbacks 
+{
+  unsigned (*load)(unsigned pc, unsigned addr);
+  void (*store)(unsigned pc, unsigned addr, unsigned data);
+  signed char (*load1)(unsigned pc, unsigned addr);
+  void (*store1)(unsigned pc, unsigned addr, signed char data);
+  signed short (*load2)(unsigned pc, unsigned addr);
+  void (*store2)(unsigned pc, unsigned addr, signed short data);
+  void (*syscall)(tgx_syscall_data* data);
+} tgx_callbacks;
+
+
+
+struct _sim_cpu 
+{
+  sim_cpu_base base;
+  tgx_cpu_regs regs;
+};
+
+struct sim_state {
+  sim_cpu *cpu;
+#define STATE_CPU(sd, n) (/*&*/ (sd)->cpu)
+  sim_state_base base;
+};
+
+
+/* Default memory size.  */
+#define M32R_DEFAULT_MEM_SIZE 0x800000 /* 8M */
+
+
+
+/* Register access fns.  These look up the current mach and call the
+   appropriate handler.  */
+SI h_gr_get (SIM_CPU *, UINT);
+void h_gr_set (SIM_CPU *, UINT, SI);
diff --git a/sim/m32r-gx/tconfig.in b/sim/m32r-gx/tconfig.in
new file mode 100644
index 0000000..49e7156
--- /dev/null
+++ b/sim/m32r-gx/tconfig.in
@@ -0,0 +1,42 @@
+/* M32R target configuration file.  -*- C -*- */
+
+/* Define this if the simulator can vary the size of memory.
+   See the xxx simulator for an example.
+   This enables the `-m size' option.
+   The memory size is stored in STATE_MEM_SIZE.  */
+/* Not used for M32R since we use the memory module.  */
+/* #define SIM_HAVE_MEM_SIZE */
+
+/* See sim-hload.c.  We properly handle LMA.  */
+#define SIM_HANDLES_LMA 1
+
+/* FIXME: Revisit.  */
+#ifdef HAVE_DV_SOCKSER
+MODULE_INSTALL_FN dv_sockser_install;
+#define MODULE_LIST dv_sockser_install,
+#endif
+
+#if 0
+/* Enable watchpoints.  */
+#define WITH_WATCHPOINTS 1
+#endif
+
+/* no profile */
+#define WITH_PROFILE 0
+
+#if 0
+#define SIM_HAVE_BREAKPOINTS
+#define SIM_BREAKPOINT { 0x10, 0xf1 }
+#define SIM_BREAKPOINT_SIZE 2
+#endif
+
+/* The semantic code should probably always use a switch().
+   However, in case that's not possible in some circumstance, we allow
+   the target to choose.  Perhaps this can be autoconf'd on whether the
+   switch is too big?  I can't (yet) think of a reason for allowing the
+   user to choose, though the developer may certainly wish to.  */
+#ifdef WANT_CPU_M32R
+#define WITH_FAST 1
+#define WITH_SEM_SWITCH_FULL 0
+#define WITH_SEM_SWITCH_FAST 1
+#endif