sim: bfin: unify se_all*opcodes tests

The current se_all*opcodes tests are very similar in how they work.
In preparation for adding more tests along these lines, unify the
common bits into a framework that others can include and build off
of easily.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>

4 files changed, 255 insertions, 287 deletions

diff --git a/sim/testsuite/sim/bfin/ChangeLog b/sim/testsuite/sim/bfin/ChangeLog
index 828ad62..23b6cd2 100644
--- a/sim/testsuite/sim/bfin/ChangeLog
+++ b/sim/testsuite/sim/bfin/ChangeLog
@@ -1,3 +1,9 @@
+2012-03-19  Mike Frysinger  <vapier@gentoo.org>
+
+	* se_allopcodes.h: New framework for testing opcode regions.
+	* se_all16bitopcodes.S: Convert over to se_allopcodes.h.
+	* se_all32bitopcodes.S: Likewise.
+
 2012-03-19  Stuart Henderson  <stuart.henderson@analog.com>
 
 	* c_dsp32shiftim_amix.s: Check edge cases in shift behavior.
diff --git a/sim/testsuite/sim/bfin/se_all16bitopcodes.S b/sim/testsuite/sim/bfin/se_all16bitopcodes.S
index 12894f0..6a6d76c 100644
--- a/sim/testsuite/sim/bfin/se_all16bitopcodes.S
+++ b/sim/testsuite/sim/bfin/se_all16bitopcodes.S
@@ -12,122 +12,20 @@
 # sim: --environment operating
 
 #include "test.h"
+#include "se_allopcodes.h"
 	.include "testutils.inc"
 
-	start
-
-	/* Set up exception handler */
-	imm32 P4, EVT3;
-	loadsym R1, _evx;
-	[P4] = R1;
-
-	/* set up the _location */
-	loadsym P0, _location
-	loadsym P1, _table;
-	[P0] = P1;
-
-	/* Enable single stepping */
-	R0 = 1;
-	SYSCFG = R0;
-
-	/* Lower to the code we want to single step through */
-	loadsym P1, _usr;
-	RETI = P1;
-
-	/* set up pointers to valid data (32Meg), to reduce address violations */
-	.macro reset_regs
-	imm32 r0, 0x2000000;
-	l0 = 0; l1 = 0; l2 = 0; l3 = 0;
-	p0 = r0; p1 = r0; p2 = r0; p3 = r0; p4 = r0; p5 = r0;
-	usp = r0; fp = r0;
-	i0 = r0; i1 = r0; i2 = r0; i3 = r0;
-	b0 = r0; b1 = r0; b2 = r0; b3 = r0;
-	.endm
-	reset_regs
-
-	RTI;
-
-	.align 4;
-_evx:
-	/* Make sure exception reason is single step */
-	R3 = SEQSTAT;
-	R4 = 0x3f;
-	R3 = R3 & R4;
-
-	/* find a match */
-	loadsym P5, _usr;
-	loadsym P4, _location;
+.macro se_all_load_insn
 	R2 = W[P5];
-	P1 = [P4];
 	R0 = R2;
-
-_match:
-	P2 = P1;
+.endm
+.macro se_all_load_table
 	R7 = W[P1++];
 	R6 = W[P1++];
 	R5 = W[P1++];
+.endm
 
-	/* is this the end of the table? */
-	R4 = 0;
-	CC = R4 == R7;
-	IF CC jump _new_instruction;
-
-	/* is the opcode (R0) greater than the 2nd entry in the table (R6) */
-	/* if so look at the next line in the table */
-	CC = R6 < R0;
-	if CC jump _match;
-
-	/* is the opcode (R0) smaller than the first entry in the table (R7) */
-	/* this means it's somewhere between the two lines, and should be legal */
-	CC = R7 <= R0;
-	if !CC jump _legal_instruction;
-
-	/* is the current EXCAUSE (R3), the same as the table (R5) */
-	/* if not, fail */
-	CC = R3 == R5
-	if !CC jump fail_lvl;
-
-_match_done:
-	/* back up, and store the location to search next */
-	[P4] = P2;
-
-	/* it matches, so fall through */
-	jump _next_instruction;
-
-_new_instruction:
-	jump _legal_instruction;
-
-	/* output the insn (R0) and excause (R3) if diff from last */
-	loadsym P0, _last_excause;
-	R2 = [P0];
-	CC = R2 == R3;
-	IF CC jump _next_instruction;
-	[P0] = R3;
-
-.ifdef BFIN_JTAG_xxxxx
-	R1 = R0;
-	R0 = 0x4;
-	call __emu_out;
-	R0 = R1 << 16;
-	R0 = R0 | R3;
-	call __emu_out;
-.else
-	loadsym P0, _next_location;
-	P1 = [P0];
-	W[P1++] = R0;
-	W[P1++] = R3;
-	[P0] = P1;
-.endif
-
-	jump _next_instruction;
-
-_legal_instruction:
-	R4 = 0x10;
-	CC = R3 == R4;
-	IF !CC JUMP fail_lvl;
-	/* it wasn't in the list, and was a single step, so fall through */
-
-_next_instruction:
+.macro se_all_next_insn
 	/* increment, and go again. */
 	R0 = R2;
 
@@ -138,44 +36,20 @@ _next_instruction:
 	IF CC JUMP pass_lvl;
 
 	W[P5] = R0;
+.endm
 
-	/* Make sure the opcode isn't in a write buffer */
-	SSYNC;
-
-	R1 = P5;
-	RETX = R1;
-
-	/* set up pointers to valid data (32Meg), to reduce address violations */
-	reset_regs
-	RETS = r0;
-	RETN = r0;
-	RETE = r0;
-	RETI = r0;
-
-	RTX;
-
-pass_lvl:
-	dbg_pass;
-fail_lvl:
-	dbg_fail;
+.macro se_all_new_insn_stub
+	jump _legal_instruction;
+.endm
+.macro se_all_new_insn_log
+	se_all_new_16bit_insn_log
+.endm
 
-	.section .text.usr
-	.align 4
-_usr:
+.macro se_all_insn_init
 	.dw 0x0000;
-	loadsym P0, fail_lvl;
-	JUMP (P0);
-
+.endm
+.macro se_all_insn_table
 	/* this table must be sorted, and end with zero */
-	.data
-	.align 4;
-_last_excause:
-	.dd 0xffff
-_next_location:
-	.dd _table_end
-_location:
-	.dd 0
-_table:
 	/* start	end		SEQSTAT */
 	.dw 0x0001,	0x000f,		0x21
 	.dw 0x0011,	0x0013,		0x2e
@@ -475,4 +349,6 @@ _table:
 	.dw 0x9ef0,	0x9eff,		0x21
 	.dw 0x9f70,	0x9f7f,		0x21
 	.dw 0x0000,	0x0000,		0x00
-_table_end:
+.endm
+
+	se_all_test
diff --git a/sim/testsuite/sim/bfin/se_all32bitopcodes.S b/sim/testsuite/sim/bfin/se_all32bitopcodes.S
index be3b395..90b1ff6 100644
--- a/sim/testsuite/sim/bfin/se_all32bitopcodes.S
+++ b/sim/testsuite/sim/bfin/se_all32bitopcodes.S
@@ -14,125 +14,22 @@
 # xfail: too many invalid insns are decoded as valid
 
 #include "test.h"
+#include "se_allopcodes.h"
 	.include "testutils.inc"
 
-	start
-
-	/* Set up exception handler */
-	imm32 P4, EVT3;
-	loadsym R1, _evx;
-	[P4] = R1;
-
-	/* set up the _location */
-	loadsym P0, _location
-	loadsym P1, _table;
-	[P0] = P1;
-
-	/* Enable single stepping */
-	R0 = 1;
-	SYSCFG = R0;
-
-	/* Lower to the code we want to single step through */
-	loadsym P1, _usr;
-	RETI = P1;
-
-	/* set up pointers to valid data (32Meg), to reduce address violations */
-	.macro reset_regs
-	imm32 r0, 0x2000000;
-	l0 = 0; l1 = 0; l2 = 0; l3 = 0;
-	p0 = r0; p1 = r0; p2 = r0; p3 = r0; p4 = r0; p5 = r0;
-	usp = r0; fp = r0;
-	i0 = r0; i1 = r0; i2 = r0; i3 = r0;
-	b0 = r0; b1 = r0; b2 = r0; b3 = r0;
-	.endm
-	reset_regs
-
-	RTI;
-
-	.align 4;
-_evx:
-	/* Make sure exception reason is single step */
-	R3 = SEQSTAT;
-	R4 = 0x3f;
-	R3 = R3 & R4;
-
-	/* find a match */
-	loadsym P5, _usr;
-	loadsym P4, _location;
+.macro se_all_load_insn
 	R2 = [P5];
-	P1 = [P4];
 	R0 = R2 << 16;
 	R1 = R2 >> 16;
 	R0 = R0 | R1;
-
-_match:
-	P2 = P1;
+.endm
+.macro se_all_load_table
 	R7 = [P1++];
 	R6 = [P1++];
 	R5 = [P1++];
+.endm
 
-	/* is this the end of the table? */
-	R4 = 0;
-	CC = R4 == R7;
-	IF CC jump _new_instruction;
-
-	/* is the opcode (R0) greater than the 2nd entry in the table (R6) */
-	/* if so look at the next line in the table */
-	CC = R6 < R0;
-	if CC jump _match;
-
-	/* is the opcode (R0) smaller than the first entry in the table (R7) */
-	/* this means it's somewhere between the two lines, and should be legal */
-	CC = R7 <= R0;
-	if !CC jump _legal_instruction;
-
-	/* is the current EXCAUSE (R3), the same as the table (R5) */
-	/* if not, fail */
-	CC = R3 == R5
-	if !CC jump fail_lvl;
-
-_match_done:
-	/* back up, and store the location to search next */
-	[P4] = P2;
-
-	/* it matches, so fall through */
-	jump _next_instruction;
-
-_new_instruction:
-	jump fail_lvl;
-
-	/* output the insn (R0) and excause (R3) if diff from last */
-	loadsym P0, _last_excause;
-	R2 = [P0];
-	CC = R2 == R3;
-	IF CC jump _next_instruction;
-	[P0] = R3;
-
-.ifdef BFIN_JTAG_xxxxx
-	R1 = R0;
-	R0 = 0x8;
-	call __emu_out;
-	R0 = R1;
-	call __emu_out;
-	R0 = R3;
-	call __emu_out;
-.else
-	loadsym P0, _next_location;
-	P1 = [P0];
-	[P1++] = R0;
-	[P1++] = R3;
-	[P0] = P1;
-.endif
-
-	jump _next_instruction;
-
-_legal_instruction:
-	R4 = 0x10;
-	CC = R3 == R4;
-	IF !CC JUMP fail_lvl;
-	/* it wasn't in the list, and was a single step, so fall through */
-
-_next_instruction:
+.macro se_all_next_insn
 	/* increment, and go again. */
 	R0 = R2;
 
@@ -169,45 +66,21 @@ _next_instruction:
 1:
 
 	[P5] = R0;
+.endm
 
-	/* Make sure the opcode isn't in a write buffer */
-	SSYNC;
-
-	R1 = P5;
-	RETX = R1;
-
-	/* set up pointers to valid data (32Meg), to reduce address violations */
-	reset_regs
-	RETS = r0;
-	RETN = r0;
-	RETE = r0;
-	RETI = r0;
-
-	RTX;
-
-pass_lvl:
-	dbg_pass;
-fail_lvl:
-	dbg_fail;
+.macro se_all_new_insn_stub
+	jump fail_lvl;
+.endm
+.macro se_all_new_insn_log
+	se_all_new_32bit_insn_log
+.endm
 
-	.section .text.usr
-	.align 4
-_usr:
+.macro se_all_insn_init
 	.dw 0xc000;
 	.dw 0x0000;
-	loadsym P0, fail_lvl;
-	JUMP (P0);
-
+.endm
+.macro se_all_insn_table
 	/* this table must be sorted, and end with zero */
-	.data
-	.align 4;
-_last_excause:
-	.dd 0xffff
-_next_location:
-	.dd _table_end
-_location:
-	.dd 0
-_table:
 	/* start		end			SEQSTAT */
 	.dw 0x1a00, 0xc000,	0x1fff, 0xc000,		0x21, 0
 	.dw 0x3a00, 0xc000,	0x3fff, 0xc000,		0x21, 0
@@ -34301,4 +34174,6 @@ _table:
 	.dw 0x0000, 0xe740,	0xffff, 0xe7ff,		0x21, 0
 	.dw 0x0000, 0xf001, 0xffff, 0xffff,		0x21, 0
 	.dw 0x0000, 0x0000,	0x0000, 0x0000,		0x00, 0
-_table_end:
+.endm
+
+	se_all_test
diff --git a/sim/testsuite/sim/bfin/se_allopcodes.h b/sim/testsuite/sim/bfin/se_allopcodes.h
new file mode 100644
index 0000000..2e45673
--- /dev/null
+++ b/sim/testsuite/sim/bfin/se_allopcodes.h
@@ -0,0 +1,211 @@
+/*
+ * set up pointers to valid data (32Meg), to reduce address violations
+ */
+.macro reset_dags
+	imm32 r0, 0x2000000;
+	l0 = 0; l1 = 0; l2 = 0; l3 = 0;
+	p0 = r0; p1 = r0; p2 = r0; p3 = r0; p4 = r0; p5 = r0;
+	usp = r0; fp = r0;
+	i0 = r0; i1 = r0; i2 = r0; i3 = r0;
+	b0 = r0; b1 = r0; b2 = r0; b3 = r0;
+.endm
+
+/*
+ * execute a test of an opcode space.  host test
+ * has to fill out a number of callbacks.
+ *
+ *	se_all_insn_init
+ *		the first insn to start executing
+ *	se_all_insn_table
+ *		the table of insn ranges and expected seqstat
+ *
+ *	se_all_load_insn
+ *	  in: P5
+ *	  out: R0, R2
+ *	  scratch: R1
+ *		load current user insn via register P5 into R0.
+ *		register R2 is available for caching with se_all_next_insn.
+ *	se_all_load_table
+ *	  in: P1
+ *	  out: R7, R6, R5
+ *	  scratch: R1
+ *		load insn range/seqstat entry from table via register P1
+ *		R7: low range
+ *		R6: high range
+ *		R5: seqstat
+ *
+ *	se_all_next_insn
+ *	  in: P5, R2
+ *	  out: <nothing>
+ *	  scratch: all but P5
+ *		advance current insn to next one for testing.  register R2
+ *		is retained from se_all_load_insn.  write out new insn to
+ *		the location via register P5.
+ *
+ *	se_all_new_insn_stub
+ *	se_all_new_insn_log
+ *		for handling of new insns ... generally not needed once done
+ */
+.macro se_all_test
+	start
+
+	/* Set up exception handler */
+	imm32 P4, EVT3;
+	loadsym R1, _evx;
+	[P4] = R1;
+
+	/* set up the _location */
+	loadsym P0, _location
+	loadsym P1, _table;
+	[P0] = P1;
+
+	/* Enable single stepping */
+	R0 = 1;
+	SYSCFG = R0;
+
+	/* Lower to the code we want to single step through */
+	loadsym P1, _usr;
+	RETI = P1;
+
+	/* set up pointers to valid data (32Meg), to reduce address violations */
+	reset_dags
+
+	RTI;
+
+pass_lvl:
+	dbg_pass;
+fail_lvl:
+	dbg_fail;
+
+_evx:
+	/* Make sure exception reason is as we expect */
+	R3 = SEQSTAT;
+	R4 = 0x3f;
+	R3 = R3 & R4;
+
+	/* find a match */
+	loadsym P5, _usr;
+	loadsym P4, _location;
+	P1 = [P4];
+	se_all_load_insn
+
+_match:
+	P2 = P1;
+	se_all_load_table
+
+	/* is this the end of the table? */
+	R4 = 0;
+	CC = R4 == R7;
+	IF CC jump _new_instruction;
+
+	/* is the opcode (R0) greater than the 2nd entry in the table (R6) */
+	/* if so look at the next line in the table */
+	CC = R6 < R0;
+	if CC jump _match;
+
+	/* is the opcode (R0) smaller than the first entry in the table (R7) */
+	/* this means it's somewhere between the two lines, and should be legal */
+	CC = R7 <= R0;
+	if !CC jump _legal_instruction;
+
+	/* is the current EXCAUSE (R3), the same as the table (R5) */
+	/* if not, fail */
+	CC = R3 == R5
+	if !CC jump fail_lvl;
+
+_match_done:
+	/* back up, and store the location to search next */
+	[P4] = P2;
+
+	/* it matches, so fall through */
+	jump _next_instruction;
+
+_new_instruction:
+	se_all_new_insn_stub
+
+	/* output the insn (R0) and excause (R3) if diff from last */
+	loadsym P0, _last_excause;
+	R2 = [P0];
+	CC = R2 == R3;
+	IF CC jump _next_instruction;
+	[P0] = R3;
+
+	se_all_new_insn_log
+
+_legal_instruction:
+	R4 = 0x10;
+	CC = R3 == R4;
+	IF !CC JUMP fail_lvl;
+	/* it wasn't in the list, and was a single step, so fall through */
+
+_next_instruction:
+	se_all_next_insn
+
+	/* Make sure the opcode isn't in a write buffer */
+	SSYNC;
+
+	R1 = P5;
+	RETX = R1;
+
+	/* set up pointers to valid data (32Meg), to reduce address violations */
+	reset_dags
+	RETS = r0;
+	RETN = r0;
+	RETE = r0;
+	RETI = r0;
+
+	RTX;
+
+.section .text.usr
+	.align 4
+_usr:
+	se_all_insn_init
+	loadsym P0, fail_lvl;
+	JUMP (P0);
+
+.data
+	.align 4;
+_last_excause:
+	.dd 0xffff
+_next_location:
+	.dd _table_end
+_location:
+	.dd 0
+_table:
+	se_all_insn_table
+_table_end:
+.endm
+
+.macro se_all_new_16bit_insn_log
+.ifdef BFIN_JTAG_xxxxx
+	R1 = R0;
+	R0 = 0x4;
+	call __emu_out;
+	R0 = R1 << 16;
+	R0 = R0 | R3;
+	call __emu_out;
+.else
+	loadsym P0, _next_location;
+	P1 = [P0];
+	W[P1++] = R0;
+	W[P1++] = R3;
+	[P0] = P1;
+.endif
+.endm
+.macro se_all_new_32bit_insn_log
+.ifdef BFIN_JTAG_xxxxx
+	R1 = R0;
+	R0 = 0x8;
+	call __emu_out;
+	R0 = R1;
+	call __emu_out;
+	R0 = R3;
+	call __emu_out;
+.else
+	loadsym P0, _next_location;
+	P1 = [P0];
+	[P1++] = R0;
+	[P1++] = R3;
+	[P0] = P1;
+.endif
+.endm