Regenerate tree using Autoconf 2.64 and Automake 1.11.

config/:
	* override.m4 (_GCC_AUTOCONF_VERSION): Bump to 2.64.

/:
	* configure: Regenerate.

etc/:
	* configure: Regenerate.

sim/common/:
	* config.in: Regenerate.
	* configure: Likewise.

sim/iq2000/:
	* config.in: Regenerate.
	* configure: Likewise.

sim/d10v/:
	* config.in: Regenerate.
	* configure: Likewise.

sim/igen/:
	* config.in: Regenerate.
	* configure: Likewise.

sim/m32r/:
	* config.in: Regenerate.
	* configure: Likewise.

sim/frv/:
	* config.in: Regenerate.
	* configure: Likewise.

sim/:
	* avr/config.in: Regenerate.
	* avr/configure: Likewise.
	* configure: Likewise.
	* cris/config.in: Likewise.
	* cris/configure: Likewise.

sim/h8300/:
	* config.in: Regenerate.
	* configure: Likewise.

sim/mn10300/:
	* config.in: Regenerate.
	* configure: Likewise.

sim/ppc/:
	* config.in: Regenerate.
	* configure: Likewise.

sim/erc32/:
	* config.in: Regenerate.
	* configure: Likewise.

sim/arm/:
	* config.in: Regenerate.
	* configure: Likewise.

sim/m68hc11/:
	* config.in: Regenerate.
	* configure: Likewise.

sim/lm32/:
	* config.in: Regenerate.
	* configure: Likewise.

sim/sh64/:
	* config.in: Regenerate.
	* configure: Likewise.

sim/v850/:
	* config.in: Regenerate.
	* configure: Likewise.

sim/cr16/:
	* config.in: Regenerate.
	* configure: Likewise.

sim/moxie/:
	* config.in: Regenerate.
	* configure: Likewise.

sim/m32c/:
	* config.in: Regenerate.
	* configure: Likewise.

sim/mips/:
	* config.in: Regenerate.
	* configure: Likewise.

sim/mcore/:
	* config.in: Regenerate.
	* configure: Likewise.

sim/testsuite/d10v-elf/:
	* configure: Regenerate.

sim/testsuite/:
	* configure: Regenerate.

sim/testsuite/frv-elf/:
	* configure: Regenerate.

sim/testsuite/m32r-elf/:
	* configure: Regenerate.

sim/testsuite/mips64el-elf/:
	* configure: Regenerate.

sim/sh/:
	* config.in: Regenerate.
	* configure: Likewise.

gold/:
	* Makefile.in: Regenerate.
	* aclocal.m4: Likewise.
	* config.in: Likewise.
	* configure: Likewise.
	* testsuite/Makefile.in: Likewise.

gprof/:
	* Makefile.in: Regenerate.
	* aclocal.m4: Likewise.
	* configure: Likewise.
	* gconfig.in: Likewise.

opcodes/:
	* Makefile.in: Regenerate.
	* aclocal.m4: Likewise.
	* config.in: Likewise.
	* configure: Likewise.

gas/:
	* Makefile.in: Regenerate.
	* aclocal.m4: Likewise.
	* config.in: Likewise.
	* configure: Likewise.
	* doc/Makefile.in: Likewise.

ld/:
	* Makefile.in: Regenerate.
	* aclocal.m4: Likewise.
	* config.in: Likewise.
	* configure: Likewise.

gdb/:
	* aclocal.m4: Regenerate.
	* config.in: Likewise.
	* configure: Likewise.
	* gnulib/Makefile.in: Likewise.

gdb/doc/:
	* configure: Regenerate.

gdb/gdbserver/:
	* aclocal.m4: Regenerate.
	* config.in: Likewise.
	* configure: Likewise.

gdb/testsuite/:
	* configure: Regenerate.
	* gdb.hp/configure: Likewise.
	* gdb.hp/gdb.aCC/configure: Likewise.
	* gdb.hp/gdb.base-hp/configure: Likewise.
	* gdb.hp/gdb.compat/configure: Likewise.
	* gdb.hp/gdb.defects/configure: Likewise.
	* gdb.hp/gdb.objdbg/configure: Likewise.
	* gdb.stabs/configure: Likewise.

binutils/:
	* Makefile.in: Regenerate.
	* aclocal.m4: Likewise.
	* config.in: Likewise.
	* configure: Likewise.
	* doc/Makefile.in: Likewise.

bfd/:
	* Makefile.in: Regenerate.
	* aclocal.m4: Likewise.
	* config.in: Likewise.
	* configure: Likewise.

bfd/doc/:
	* Makefile.in: Regenerate.

readline/:
	* configure: Regenerate.

readline/examples/rlfe/:
	* configure: Regenerate.

1 files changed, 1930 insertions, 1290 deletions

diff --git a/sim/testsuite/configure b/sim/testsuite/configure
index cb6c090..03db937 100755
--- a/sim/testsuite/configure
+++ b/sim/testsuite/configure
@@ -1,81 +1,412 @@
 #! /bin/sh
 # Guess values for system-dependent variables and create Makefiles.
-# Generated by GNU Autoconf 2.59.
+# Generated by GNU Autoconf 2.64.
+#
+# Copyright (C) 1992, 1993, 1994, 1995, 1996, 1998, 1999, 2000, 2001,
+# 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009 Free Software
+# Foundation, Inc.
 #
-# Copyright (C) 2003 Free Software Foundation, Inc.
 # This configure script is free software; the Free Software Foundation
 # gives unlimited permission to copy, distribute and modify it.
-## --------------------- ##
-## M4sh Initialization.  ##
-## --------------------- ##
+## -------------------- ##
+## M4sh Initialization. ##
+## -------------------- ##
 
-# Be Bourne compatible
-if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then
+# Be more Bourne compatible
+DUALCASE=1; export DUALCASE # for MKS sh
+if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then :
   emulate sh
   NULLCMD=:
-  # Zsh 3.x and 4.x performs word splitting on ${1+"$@"}, which
+  # Pre-4.2 versions of Zsh do word splitting on ${1+"$@"}, which
   # is contrary to our usage.  Disable this feature.
   alias -g '${1+"$@"}'='"$@"'
-elif test -n "${BASH_VERSION+set}" && (set -o posix) >/dev/null 2>&1; then
-  set -o posix
+  setopt NO_GLOB_SUBST
+else
+  case `(set -o) 2>/dev/null` in #(
+  *posix*) :
+    set -o posix ;; #(
+  *) :
+     ;;
+esac
 fi
-DUALCASE=1; export DUALCASE # for MKS sh
 
-# Support unset when possible.
-if ( (MAIL=60; unset MAIL) || exit) >/dev/null 2>&1; then
-  as_unset=unset
+
+as_nl='
+'
+export as_nl
+# Printing a long string crashes Solaris 7 /usr/bin/printf.
+as_echo='\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\'
+as_echo=$as_echo$as_echo$as_echo$as_echo$as_echo
+as_echo=$as_echo$as_echo$as_echo$as_echo$as_echo$as_echo
+# Prefer a ksh shell builtin over an external printf program on Solaris,
+# but without wasting forks for bash or zsh.
+if test -z "$BASH_VERSION$ZSH_VERSION" \
+    && (test "X`print -r -- $as_echo`" = "X$as_echo") 2>/dev/null; then
+  as_echo='print -r --'
+  as_echo_n='print -rn --'
+elif (test "X`printf %s $as_echo`" = "X$as_echo") 2>/dev/null; then
+  as_echo='printf %s\n'
+  as_echo_n='printf %s'
 else
-  as_unset=false
+  if test "X`(/usr/ucb/echo -n -n $as_echo) 2>/dev/null`" = "X-n $as_echo"; then
+    as_echo_body='eval /usr/ucb/echo -n "$1$as_nl"'
+    as_echo_n='/usr/ucb/echo -n'
+  else
+    as_echo_body='eval expr "X$1" : "X\\(.*\\)"'
+    as_echo_n_body='eval
+      arg=$1;
+      case $arg in #(
+      *"$as_nl"*)
+	expr "X$arg" : "X\\(.*\\)$as_nl";
+	arg=`expr "X$arg" : ".*$as_nl\\(.*\\)"`;;
+      esac;
+      expr "X$arg" : "X\\(.*\\)" | tr -d "$as_nl"
+    '
+    export as_echo_n_body
+    as_echo_n='sh -c $as_echo_n_body as_echo'
+  fi
+  export as_echo_body
+  as_echo='sh -c $as_echo_body as_echo'
 fi
 
+# The user is always right.
+if test "${PATH_SEPARATOR+set}" != set; then
+  PATH_SEPARATOR=:
+  (PATH='/bin;/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 && {
+    (PATH='/bin:/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 ||
+      PATH_SEPARATOR=';'
+  }
+fi
+
+
+# IFS
+# We need space, tab and new line, in precisely that order.  Quoting is
+# there to prevent editors from complaining about space-tab.
+# (If _AS_PATH_WALK were called with IFS unset, it would disable word
+# splitting by setting IFS to empty value.)
+IFS=" ""	$as_nl"
+
+# Find who we are.  Look in the path if we contain no directory separator.
+case $0 in #((
+  *[\\/]* ) as_myself=$0 ;;
+  *) as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    test -r "$as_dir/$0" && as_myself=$as_dir/$0 && break
+  done
+IFS=$as_save_IFS
+
+     ;;
+esac
+# We did not find ourselves, most probably we were run as `sh COMMAND'
+# in which case we are not to be found in the path.
+if test "x$as_myself" = x; then
+  as_myself=$0
+fi
+if test ! -f "$as_myself"; then
+  $as_echo "$as_myself: error: cannot find myself; rerun with an absolute file name" >&2
+  exit 1
+fi
 
-# Work around bugs in pre-3.0 UWIN ksh.
-$as_unset ENV MAIL MAILPATH
+# Unset variables that we do not need and which cause bugs (e.g. in
+# pre-3.0 UWIN ksh).  But do not cause bugs in bash 2.01; the "|| exit 1"
+# suppresses any "Segmentation fault" message there.  '((' could
+# trigger a bug in pdksh 5.2.14.
+for as_var in BASH_ENV ENV MAIL MAILPATH
+do eval test x\${$as_var+set} = xset \
+  && ( (unset $as_var) || exit 1) >/dev/null 2>&1 && unset $as_var || :
+done
 PS1='$ '
 PS2='> '
 PS4='+ '
 
 # NLS nuisances.
-for as_var in \
-  LANG LANGUAGE LC_ADDRESS LC_ALL LC_COLLATE LC_CTYPE LC_IDENTIFICATION \
-  LC_MEASUREMENT LC_MESSAGES LC_MONETARY LC_NAME LC_NUMERIC LC_PAPER \
-  LC_TELEPHONE LC_TIME
+LC_ALL=C
+export LC_ALL
+LANGUAGE=C
+export LANGUAGE
+
+# CDPATH.
+(unset CDPATH) >/dev/null 2>&1 && unset CDPATH
+
+if test "x$CONFIG_SHELL" = x; then
+  as_bourne_compatible="if test -n \"\${ZSH_VERSION+set}\" && (emulate sh) >/dev/null 2>&1; then :
+  emulate sh
+  NULLCMD=:
+  # Pre-4.2 versions of Zsh do word splitting on \${1+\"\$@\"}, which
+  # is contrary to our usage.  Disable this feature.
+  alias -g '\${1+\"\$@\"}'='\"\$@\"'
+  setopt NO_GLOB_SUBST
+else
+  case \`(set -o) 2>/dev/null\` in #(
+  *posix*) :
+    set -o posix ;; #(
+  *) :
+     ;;
+esac
+fi
+"
+  as_required="as_fn_return () { (exit \$1); }
+as_fn_success () { as_fn_return 0; }
+as_fn_failure () { as_fn_return 1; }
+as_fn_ret_success () { return 0; }
+as_fn_ret_failure () { return 1; }
+
+exitcode=0
+as_fn_success || { exitcode=1; echo as_fn_success failed.; }
+as_fn_failure && { exitcode=1; echo as_fn_failure succeeded.; }
+as_fn_ret_success || { exitcode=1; echo as_fn_ret_success failed.; }
+as_fn_ret_failure && { exitcode=1; echo as_fn_ret_failure succeeded.; }
+if ( set x; as_fn_ret_success y && test x = \"\$1\" ); then :
+
+else
+  exitcode=1; echo positional parameters were not saved.
+fi
+test x\$exitcode = x0 || exit 1"
+  as_suggested="  as_lineno_1=";as_suggested=$as_suggested$LINENO;as_suggested=$as_suggested" as_lineno_1a=\$LINENO
+  as_lineno_2=";as_suggested=$as_suggested$LINENO;as_suggested=$as_suggested" as_lineno_2a=\$LINENO
+  eval 'test \"x\$as_lineno_1'\$as_run'\" != \"x\$as_lineno_2'\$as_run'\" &&
+  test \"x\`expr \$as_lineno_1'\$as_run' + 1\`\" = \"x\$as_lineno_2'\$as_run'\"' || exit 1"
+  if (eval "$as_required") 2>/dev/null; then :
+  as_have_required=yes
+else
+  as_have_required=no
+fi
+  if test x$as_have_required = xyes && (eval "$as_suggested") 2>/dev/null; then :
+
+else
+  as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+as_found=false
+for as_dir in /bin$PATH_SEPARATOR/usr/bin$PATH_SEPARATOR$PATH
 do
-  if (set +x; test -z "`(eval $as_var=C; export $as_var) 2>&1`"); then
-    eval $as_var=C; export $as_var
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+  as_found=:
+  case $as_dir in #(
+	 /*)
+	   for as_base in sh bash ksh sh5; do
+	     # Try only shells that exist, to save several forks.
+	     as_shell=$as_dir/$as_base
+	     if { test -f "$as_shell" || test -f "$as_shell.exe"; } &&
+		    { $as_echo "$as_bourne_compatible""$as_required" | as_run=a "$as_shell"; } 2>/dev/null; then :
+  CONFIG_SHELL=$as_shell as_have_required=yes
+		   if { $as_echo "$as_bourne_compatible""$as_suggested" | as_run=a "$as_shell"; } 2>/dev/null; then :
+  break 2
+fi
+fi
+	   done;;
+       esac
+  as_found=false
+done
+$as_found || { if { test -f "$SHELL" || test -f "$SHELL.exe"; } &&
+	      { $as_echo "$as_bourne_compatible""$as_required" | as_run=a "$SHELL"; } 2>/dev/null; then :
+  CONFIG_SHELL=$SHELL as_have_required=yes
+fi; }
+IFS=$as_save_IFS
+
+
+      if test "x$CONFIG_SHELL" != x; then :
+  # We cannot yet assume a decent shell, so we have to provide a
+	# neutralization value for shells without unset; and this also
+	# works around shells that cannot unset nonexistent variables.
+	BASH_ENV=/dev/null
+	ENV=/dev/null
+	(unset BASH_ENV) >/dev/null 2>&1 && unset BASH_ENV ENV
+	export CONFIG_SHELL
+	exec "$CONFIG_SHELL" "$as_myself" ${1+"$@"}
+fi
+
+    if test x$as_have_required = xno; then :
+  $as_echo "$0: This script requires a shell more modern than all"
+  $as_echo "$0: the shells that I found on your system."
+  if test x${ZSH_VERSION+set} = xset ; then
+    $as_echo "$0: In particular, zsh $ZSH_VERSION has bugs and should"
+    $as_echo "$0: be upgraded to zsh 4.3.4 or later."
   else
-    $as_unset $as_var
+    $as_echo "$0: Please tell bug-autoconf@gnu.org about your system,
+$0: including any error possibly output before this
+$0: message. Then install a modern shell, or manually run
+$0: the script under such a shell if you do have one."
   fi
-done
+  exit 1
+fi
+fi
+fi
+SHELL=${CONFIG_SHELL-/bin/sh}
+export SHELL
+# Unset more variables known to interfere with behavior of common tools.
+CLICOLOR_FORCE= GREP_OPTIONS=
+unset CLICOLOR_FORCE GREP_OPTIONS
+
+## --------------------- ##
+## M4sh Shell Functions. ##
+## --------------------- ##
+# as_fn_unset VAR
+# ---------------
+# Portably unset VAR.
+as_fn_unset ()
+{
+  { eval $1=; unset $1;}
+}
+as_unset=as_fn_unset
+
+# as_fn_set_status STATUS
+# -----------------------
+# Set $? to STATUS, without forking.
+as_fn_set_status ()
+{
+  return $1
+} # as_fn_set_status
+
+# as_fn_exit STATUS
+# -----------------
+# Exit the shell with STATUS, even in a "trap 0" or "set -e" context.
+as_fn_exit ()
+{
+  set +e
+  as_fn_set_status $1
+  exit $1
+} # as_fn_exit
+
+# as_fn_mkdir_p
+# -------------
+# Create "$as_dir" as a directory, including parents if necessary.
+as_fn_mkdir_p ()
+{
 
-# Required to use basename.
-if expr a : '\(a\)' >/dev/null 2>&1; then
+  case $as_dir in #(
+  -*) as_dir=./$as_dir;;
+  esac
+  test -d "$as_dir" || eval $as_mkdir_p || {
+    as_dirs=
+    while :; do
+      case $as_dir in #(
+      *\'*) as_qdir=`$as_echo "$as_dir" | sed "s/'/'\\\\\\\\''/g"`;; #'(
+      *) as_qdir=$as_dir;;
+      esac
+      as_dirs="'$as_qdir' $as_dirs"
+      as_dir=`$as_dirname -- "$as_dir" ||
+$as_expr X"$as_dir" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
+	 X"$as_dir" : 'X\(//\)[^/]' \| \
+	 X"$as_dir" : 'X\(//\)$' \| \
+	 X"$as_dir" : 'X\(/\)' \| . 2>/dev/null ||
+$as_echo X"$as_dir" |
+    sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{
+	    s//\1/
+	    q
+	  }
+	  /^X\(\/\/\)[^/].*/{
+	    s//\1/
+	    q
+	  }
+	  /^X\(\/\/\)$/{
+	    s//\1/
+	    q
+	  }
+	  /^X\(\/\).*/{
+	    s//\1/
+	    q
+	  }
+	  s/.*/./; q'`
+      test -d "$as_dir" && break
+    done
+    test -z "$as_dirs" || eval "mkdir $as_dirs"
+  } || test -d "$as_dir" || as_fn_error "cannot create directory $as_dir"
+
+
+} # as_fn_mkdir_p
+# as_fn_append VAR VALUE
+# ----------------------
+# Append the text in VALUE to the end of the definition contained in VAR. Take
+# advantage of any shell optimizations that allow amortized linear growth over
+# repeated appends, instead of the typical quadratic growth present in naive
+# implementations.
+if (eval "as_var=1; as_var+=2; test x\$as_var = x12") 2>/dev/null; then :
+  eval 'as_fn_append ()
+  {
+    eval $1+=\$2
+  }'
+else
+  as_fn_append ()
+  {
+    eval $1=\$$1\$2
+  }
+fi # as_fn_append
+
+# as_fn_arith ARG...
+# ------------------
+# Perform arithmetic evaluation on the ARGs, and store the result in the
+# global $as_val. Take advantage of shells that can avoid forks. The arguments
+# must be portable across $(()) and expr.
+if (eval "test \$(( 1 + 1 )) = 2") 2>/dev/null; then :
+  eval 'as_fn_arith ()
+  {
+    as_val=$(( $* ))
+  }'
+else
+  as_fn_arith ()
+  {
+    as_val=`expr "$@" || test $? -eq 1`
+  }
+fi # as_fn_arith
+
+
+# as_fn_error ERROR [LINENO LOG_FD]
+# ---------------------------------
+# Output "`basename $0`: error: ERROR" to stderr. If LINENO and LOG_FD are
+# provided, also output the error to LOG_FD, referencing LINENO. Then exit the
+# script with status $?, using 1 if that was 0.
+as_fn_error ()
+{
+  as_status=$?; test $as_status -eq 0 && as_status=1
+  if test "$3"; then
+    as_lineno=${as_lineno-"$2"} as_lineno_stack=as_lineno_stack=$as_lineno_stack
+    $as_echo "$as_me:${as_lineno-$LINENO}: error: $1" >&$3
+  fi
+  $as_echo "$as_me: error: $1" >&2
+  as_fn_exit $as_status
+} # as_fn_error
+
+if expr a : '\(a\)' >/dev/null 2>&1 &&
+   test "X`expr 00001 : '.*\(...\)'`" = X001; then
   as_expr=expr
 else
   as_expr=false
 fi
 
-if (basename /) >/dev/null 2>&1 && test "X`basename / 2>&1`" = "X/"; then
+if (basename -- /) >/dev/null 2>&1 && test "X`basename -- / 2>&1`" = "X/"; then
   as_basename=basename
 else
   as_basename=false
 fi
 
+if (as_dir=`dirname -- /` && test "X$as_dir" = X/) >/dev/null 2>&1; then
+  as_dirname=dirname
+else
+  as_dirname=false
+fi
 
-# Name of the executable.
-as_me=`$as_basename "$0" ||
+as_me=`$as_basename -- "$0" ||
 $as_expr X/"$0" : '.*/\([^/][^/]*\)/*$' \| \
 	 X"$0" : 'X\(//\)$' \| \
-	 X"$0" : 'X\(/\)$' \| \
-	 .     : '\(.\)' 2>/dev/null ||
-echo X/"$0" |
-    sed '/^.*\/\([^/][^/]*\)\/*$/{ s//\1/; q; }
-  	  /^X\/\(\/\/\)$/{ s//\1/; q; }
-  	  /^X\/\(\/\).*/{ s//\1/; q; }
-  	  s/.*/./; q'`
+	 X"$0" : 'X\(/\)' \| . 2>/dev/null ||
+$as_echo X/"$0" |
+    sed '/^.*\/\([^/][^/]*\)\/*$/{
+	    s//\1/
+	    q
+	  }
+	  /^X\/\(\/\/\)$/{
+	    s//\1/
+	    q
+	  }
+	  /^X\/\(\/\).*/{
+	    s//\1/
+	    q
+	  }
+	  s/.*/./; q'`
 
-
-# PATH needs CR, and LINENO needs CR and PATH.
 # Avoid depending upon Character Ranges.
 as_cr_letters='abcdefghijklmnopqrstuvwxyz'
 as_cr_LETTERS='ABCDEFGHIJKLMNOPQRSTUVWXYZ'
@@ -83,146 +414,107 @@ as_cr_Letters=$as_cr_letters$as_cr_LETTERS
 as_cr_digits='0123456789'
 as_cr_alnum=$as_cr_Letters$as_cr_digits
 
-# The user is always right.
-if test "${PATH_SEPARATOR+set}" != set; then
-  echo "#! /bin/sh" >conf$$.sh
-  echo  "exit 0"   >>conf$$.sh
-  chmod +x conf$$.sh
-  if (PATH="/nonexistent;."; conf$$.sh) >/dev/null 2>&1; then
-    PATH_SEPARATOR=';'
-  else
-    PATH_SEPARATOR=:
-  fi
-  rm -f conf$$.sh
-fi
-
-
-  as_lineno_1=$LINENO
-  as_lineno_2=$LINENO
-  as_lineno_3=`(expr $as_lineno_1 + 1) 2>/dev/null`
-  test "x$as_lineno_1" != "x$as_lineno_2" &&
-  test "x$as_lineno_3"  = "x$as_lineno_2"  || {
-  # Find who we are.  Look in the path if we contain no path at all
-  # relative or not.
-  case $0 in
-    *[\\/]* ) as_myself=$0 ;;
-    *) as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
-  IFS=$as_save_IFS
-  test -z "$as_dir" && as_dir=.
-  test -r "$as_dir/$0" && as_myself=$as_dir/$0 && break
-done
-
-       ;;
-  esac
-  # We did not find ourselves, most probably we were run as `sh COMMAND'
-  # in which case we are not to be found in the path.
-  if test "x$as_myself" = x; then
-    as_myself=$0
-  fi
-  if test ! -f "$as_myself"; then
-    { echo "$as_me: error: cannot find myself; rerun with an absolute path" >&2
-   { (exit 1); exit 1; }; }
-  fi
-  case $CONFIG_SHELL in
-  '')
-    as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in /bin$PATH_SEPARATOR/usr/bin$PATH_SEPARATOR$PATH
-do
-  IFS=$as_save_IFS
-  test -z "$as_dir" && as_dir=.
-  for as_base in sh bash ksh sh5; do
-	 case $as_dir in
-	 /*)
-	   if ("$as_dir/$as_base" -c '
-  as_lineno_1=$LINENO
-  as_lineno_2=$LINENO
-  as_lineno_3=`(expr $as_lineno_1 + 1) 2>/dev/null`
-  test "x$as_lineno_1" != "x$as_lineno_2" &&
-  test "x$as_lineno_3"  = "x$as_lineno_2" ') 2>/dev/null; then
-	     $as_unset BASH_ENV || test "${BASH_ENV+set}" != set || { BASH_ENV=; export BASH_ENV; }
-	     $as_unset ENV || test "${ENV+set}" != set || { ENV=; export ENV; }
-	     CONFIG_SHELL=$as_dir/$as_base
-	     export CONFIG_SHELL
-	     exec "$CONFIG_SHELL" "$0" ${1+"$@"}
-	   fi;;
-	 esac
-       done
-done
-;;
-  esac
 
-  # Create $as_me.lineno as a copy of $as_myself, but with $LINENO
-  # uniformly replaced by the line number.  The first 'sed' inserts a
-  # line-number line before each line; the second 'sed' does the real
-  # work.  The second script uses 'N' to pair each line-number line
-  # with the numbered line, and appends trailing '-' during
-  # substitution so that $LINENO is not a special case at line end.
-  # (Raja R Harinath suggested sed '=', and Paul Eggert wrote the
-  # second 'sed' script.  Blame Lee E. McMahon for sed's syntax.  :-)
-  sed '=' <$as_myself |
+  as_lineno_1=$LINENO as_lineno_1a=$LINENO
+  as_lineno_2=$LINENO as_lineno_2a=$LINENO
+  eval 'test "x$as_lineno_1'$as_run'" != "x$as_lineno_2'$as_run'" &&
+  test "x`expr $as_lineno_1'$as_run' + 1`" = "x$as_lineno_2'$as_run'"' || {
+  # Blame Lee E. McMahon (1931-1989) for sed's syntax.  :-)
+  sed -n '
+    p
+    /[$]LINENO/=
+  ' <$as_myself |
     sed '
+      s/[$]LINENO.*/&-/
+      t lineno
+      b
+      :lineno
       N
-      s,$,-,
-      : loop
-      s,^\(['$as_cr_digits']*\)\(.*\)[$]LINENO\([^'$as_cr_alnum'_]\),\1\2\1\3,
+      :loop
+      s/[$]LINENO\([^'$as_cr_alnum'_].*\n\)\(.*\)/\2\1\2/
       t loop
-      s,-$,,
-      s,^['$as_cr_digits']*\n,,
+      s/-\n.*//
     ' >$as_me.lineno &&
-  chmod +x $as_me.lineno ||
-    { echo "$as_me: error: cannot create $as_me.lineno; rerun with a POSIX shell" >&2
-   { (exit 1); exit 1; }; }
+  chmod +x "$as_me.lineno" ||
+    { $as_echo "$as_me: error: cannot create $as_me.lineno; rerun with a POSIX shell" >&2; as_fn_exit 1; }
 
   # Don't try to exec as it changes $[0], causing all sort of problems
   # (the dirname of $[0] is not the place where we might find the
-  # original and so on.  Autoconf is especially sensible to this).
-  . ./$as_me.lineno
+  # original and so on.  Autoconf is especially sensitive to this).
+  . "./$as_me.lineno"
   # Exit status is that of the last command.
   exit
 }
 
-
-case `echo "testing\c"; echo 1,2,3`,`echo -n testing; echo 1,2,3` in
-  *c*,-n*) ECHO_N= ECHO_C='
-' ECHO_T='	' ;;
-  *c*,*  ) ECHO_N=-n ECHO_C= ECHO_T= ;;
-  *)       ECHO_N= ECHO_C='\c' ECHO_T= ;;
+ECHO_C= ECHO_N= ECHO_T=
+case `echo -n x` in #(((((
+-n*)
+  case `echo 'xy\c'` in
+  *c*) ECHO_T='	';;	# ECHO_T is single tab character.
+  xy)  ECHO_C='\c';;
+  *)   echo `echo ksh88 bug on AIX 6.1` > /dev/null
+       ECHO_T='	';;
+  esac;;
+*)
+  ECHO_N='-n';;
 esac
 
-if expr a : '\(a\)' >/dev/null 2>&1; then
-  as_expr=expr
+rm -f conf$$ conf$$.exe conf$$.file
+if test -d conf$$.dir; then
+  rm -f conf$$.dir/conf$$.file
 else
-  as_expr=false
+  rm -f conf$$.dir
+  mkdir conf$$.dir 2>/dev/null
 fi
-
-rm -f conf$$ conf$$.exe conf$$.file
-echo >conf$$.file
-if ln -s conf$$.file conf$$ 2>/dev/null; then
-  # We could just check for DJGPP; but this test a) works b) is more generic
-  # and c) will remain valid once DJGPP supports symlinks (DJGPP 2.04).
-  if test -f conf$$.exe; then
-    # Don't use ln at all; we don't have any links
-    as_ln_s='cp -p'
-  else
+if (echo >conf$$.file) 2>/dev/null; then
+  if ln -s conf$$.file conf$$ 2>/dev/null; then
     as_ln_s='ln -s'
+    # ... but there are two gotchas:
+    # 1) On MSYS, both `ln -s file dir' and `ln file dir' fail.
+    # 2) DJGPP < 2.04 has no symlinks; `ln -s' creates a wrapper executable.
+    # In both cases, we have to default to `cp -p'.
+    ln -s conf$$.file conf$$.dir 2>/dev/null && test ! -f conf$$.exe ||
+      as_ln_s='cp -p'
+  elif ln conf$$.file conf$$ 2>/dev/null; then
+    as_ln_s=ln
+  else
+    as_ln_s='cp -p'
   fi
-elif ln conf$$.file conf$$ 2>/dev/null; then
-  as_ln_s=ln
 else
   as_ln_s='cp -p'
 fi
-rm -f conf$$ conf$$.exe conf$$.file
+rm -f conf$$ conf$$.exe conf$$.dir/conf$$.file conf$$.file
+rmdir conf$$.dir 2>/dev/null
 
 if mkdir -p . 2>/dev/null; then
-  as_mkdir_p=:
+  as_mkdir_p='mkdir -p "$as_dir"'
 else
   test -d ./-p && rmdir ./-p
   as_mkdir_p=false
 fi
 
-as_executable_p="test -f"
+if test -x / >/dev/null 2>&1; then
+  as_test_x='test -x'
+else
+  if ls -dL / >/dev/null 2>&1; then
+    as_ls_L_option=L
+  else
+    as_ls_L_option=
+  fi
+  as_test_x='
+    eval sh -c '\''
+      if test -d "$1"; then
+	test -d "$1/.";
+      else
+	case $1 in #(
+	-*)set "./$1";;
+	esac;
+	case `ls -ld'$as_ls_L_option' "$1" 2>/dev/null` in #((
+	???[sx]*):;;*)false;;esac;fi
+    '\'' sh
+  '
+fi
+as_executable_p=$as_test_x
 
 # Sed expression to map a string onto a valid CPP name.
 as_tr_cpp="eval sed 'y%*$as_cr_letters%P$as_cr_LETTERS%;s%[^_$as_cr_alnum]%_%g'"
@@ -231,38 +523,24 @@ as_tr_cpp="eval sed 'y%*$as_cr_letters%P$as_cr_LETTERS%;s%[^_$as_cr_alnum]%_%g'"
 as_tr_sh="eval sed 'y%*+%pp%;s%[^_$as_cr_alnum]%_%g'"
 
 
-# IFS
-# We need space, tab and new line, in precisely that order.
-as_nl='
-'
-IFS=" 	$as_nl"
-
-# CDPATH.
-$as_unset CDPATH
-
+exec 7<&0 </dev/null 6>&1
 
 # Name of the host.
 # hostname on some systems (SVR3.2, Linux) returns a bogus exit status,
 # so uname gets run too.
 ac_hostname=`(hostname || uname -n) 2>/dev/null | sed 1q`
 
-exec 6>&1
-
 #
 # Initializations.
 #
 ac_default_prefix=/usr/local
+ac_clean_files=
 ac_config_libobj_dir=.
+LIBOBJS=
 cross_compiling=no
 subdirs=
 MFLAGS=
 MAKEFLAGS=
-SHELL=${CONFIG_SHELL-/bin/sh}
-
-# Maximum number of lines to put in a shell here document.
-# This variable seems obsolete.  It should probably be removed, and
-# only ac_max_sed_lines should be used.
-: ${ac_max_here_lines=38}
 
 # Identity of this package.
 PACKAGE_NAME=
@@ -270,17 +548,81 @@ PACKAGE_TARNAME=
 PACKAGE_VERSION=
 PACKAGE_STRING=
 PACKAGE_BUGREPORT=
+PACKAGE_URL=
 
 ac_unique_file="common/bits-tst.c"
-ac_subdirs_all="$ac_subdirs_all frv-elf"
-ac_subdirs_all="$ac_subdirs_all m32r-elf"
-ac_subdirs_all="$ac_subdirs_all mips64el-elf"
-ac_subst_vars='SHELL PATH_SEPARATOR PACKAGE_NAME PACKAGE_TARNAME PACKAGE_VERSION PACKAGE_STRING PACKAGE_BUGREPORT exec_prefix prefix program_transform_name bindir sbindir libexecdir datadir sysconfdir sharedstatedir localstatedir libdir includedir oldincludedir infodir mandir build_alias host_alias target_alias DEFS ECHO_C ECHO_N ECHO_T LIBS CC build build_cpu build_vendor build_os host host_cpu host_vendor host_os target target_cpu target_vendor target_os subdirs arch LIBOBJS LTLIBOBJS'
+enable_option_checking=no
+ac_subst_vars='LTLIBOBJS
+LIBOBJS
+arch
+subdirs
+target_os
+target_vendor
+target_cpu
+target
+host_os
+host_vendor
+host_cpu
+host
+build_os
+build_vendor
+build_cpu
+build
+CC
+target_alias
+host_alias
+build_alias
+LIBS
+ECHO_T
+ECHO_N
+ECHO_C
+DEFS
+mandir
+localedir
+libdir
+psdir
+pdfdir
+dvidir
+htmldir
+infodir
+docdir
+oldincludedir
+includedir
+localstatedir
+sharedstatedir
+sysconfdir
+datadir
+datarootdir
+libexecdir
+sbindir
+bindir
+program_transform_name
+prefix
+exec_prefix
+PACKAGE_URL
+PACKAGE_BUGREPORT
+PACKAGE_STRING
+PACKAGE_VERSION
+PACKAGE_TARNAME
+PACKAGE_NAME
+PATH_SEPARATOR
+SHELL'
 ac_subst_files=''
+ac_user_opts='
+enable_option_checking
+'
+      ac_precious_vars='build_alias
+host_alias
+target_alias'
+ac_subdirs_all='frv-elf
+m32r-elf
+mips64el-elf'
 
 # Initialize some variables set by options.
 ac_init_help=
 ac_init_version=false
+ac_unrecognized_opts=
+ac_unrecognized_sep=
 # The variables have the same names as the options, with
 # dashes changed to underlines.
 cache_file=/dev/null
@@ -303,34 +645,48 @@ x_libraries=NONE
 # and all the variables that are supposed to be based on exec_prefix
 # by default will actually change.
 # Use braces instead of parens because sh, perl, etc. also accept them.
+# (The list follows the same order as the GNU Coding Standards.)
 bindir='${exec_prefix}/bin'
 sbindir='${exec_prefix}/sbin'
 libexecdir='${exec_prefix}/libexec'
-datadir='${prefix}/share'
+datarootdir='${prefix}/share'
+datadir='${datarootdir}'
 sysconfdir='${prefix}/etc'
 sharedstatedir='${prefix}/com'
 localstatedir='${prefix}/var'
-libdir='${exec_prefix}/lib'
 includedir='${prefix}/include'
 oldincludedir='/usr/include'
-infodir='${prefix}/info'
-mandir='${prefix}/man'
+docdir='${datarootdir}/doc/${PACKAGE}'
+infodir='${datarootdir}/info'
+htmldir='${docdir}'
+dvidir='${docdir}'
+pdfdir='${docdir}'
+psdir='${docdir}'
+libdir='${exec_prefix}/lib'
+localedir='${datarootdir}/locale'
+mandir='${datarootdir}/man'
 
 ac_prev=
+ac_dashdash=
 for ac_option
 do
   # If the previous option needs an argument, assign it.
   if test -n "$ac_prev"; then
-    eval "$ac_prev=\$ac_option"
+    eval $ac_prev=\$ac_option
     ac_prev=
     continue
   fi
 
-  ac_optarg=`expr "x$ac_option" : 'x[^=]*=\(.*\)'`
+  case $ac_option in
+  *=*)	ac_optarg=`expr "X$ac_option" : '[^=]*=\(.*\)'` ;;
+  *)	ac_optarg=yes ;;
+  esac
 
   # Accept the important Cygnus configure options, so we can diagnose typos.
 
-  case $ac_option in
+  case $ac_dashdash$ac_option in
+  --)
+    ac_dashdash=yes ;;
 
   -bindir | --bindir | --bindi | --bind | --bin | --bi)
     ac_prev=bindir ;;
@@ -352,33 +708,59 @@ do
   --config-cache | -C)
     cache_file=config.cache ;;
 
-  -datadir | --datadir | --datadi | --datad | --data | --dat | --da)
+  -datadir | --datadir | --datadi | --datad)
     ac_prev=datadir ;;
-  -datadir=* | --datadir=* | --datadi=* | --datad=* | --data=* | --dat=* \
-  | --da=*)
+  -datadir=* | --datadir=* | --datadi=* | --datad=*)
     datadir=$ac_optarg ;;
 
+  -datarootdir | --datarootdir | --datarootdi | --datarootd | --dataroot \
+  | --dataroo | --dataro | --datar)
+    ac_prev=datarootdir ;;
+  -datarootdir=* | --datarootdir=* | --datarootdi=* | --datarootd=* \
+  | --dataroot=* | --dataroo=* | --dataro=* | --datar=*)
+    datarootdir=$ac_optarg ;;
+
   -disable-* | --disable-*)
-    ac_feature=`expr "x$ac_option" : 'x-*disable-\(.*\)'`
+    ac_useropt=`expr "x$ac_option" : 'x-*disable-\(.*\)'`
     # Reject names that are not valid shell variable names.
-    expr "x$ac_feature" : ".*[^-_$as_cr_alnum]" >/dev/null &&
-      { echo "$as_me: error: invalid feature name: $ac_feature" >&2
-   { (exit 1); exit 1; }; }
-    ac_feature=`echo $ac_feature | sed 's/-/_/g'`
-    eval "enable_$ac_feature=no" ;;
+    expr "x$ac_useropt" : ".*[^-+._$as_cr_alnum]" >/dev/null &&
+      as_fn_error "invalid feature name: $ac_useropt"
+    ac_useropt_orig=$ac_useropt
+    ac_useropt=`$as_echo "$ac_useropt" | sed 's/[-+.]/_/g'`
+    case $ac_user_opts in
+      *"
+"enable_$ac_useropt"
+"*) ;;
+      *) ac_unrecognized_opts="$ac_unrecognized_opts$ac_unrecognized_sep--disable-$ac_useropt_orig"
+	 ac_unrecognized_sep=', ';;
+    esac
+    eval enable_$ac_useropt=no ;;
+
+  -docdir | --docdir | --docdi | --doc | --do)
+    ac_prev=docdir ;;
+  -docdir=* | --docdir=* | --docdi=* | --doc=* | --do=*)
+    docdir=$ac_optarg ;;
+
+  -dvidir | --dvidir | --dvidi | --dvid | --dvi | --dv)
+    ac_prev=dvidir ;;
+  -dvidir=* | --dvidir=* | --dvidi=* | --dvid=* | --dvi=* | --dv=*)
+    dvidir=$ac_optarg ;;
 
   -enable-* | --enable-*)
-    ac_feature=`expr "x$ac_option" : 'x-*enable-\([^=]*\)'`
+    ac_useropt=`expr "x$ac_option" : 'x-*enable-\([^=]*\)'`
     # Reject names that are not valid shell variable names.
-    expr "x$ac_feature" : ".*[^-_$as_cr_alnum]" >/dev/null &&
-      { echo "$as_me: error: invalid feature name: $ac_feature" >&2
-   { (exit 1); exit 1; }; }
-    ac_feature=`echo $ac_feature | sed 's/-/_/g'`
-    case $ac_option in
-      *=*) ac_optarg=`echo "$ac_optarg" | sed "s/'/'\\\\\\\\''/g"`;;
-      *) ac_optarg=yes ;;
+    expr "x$ac_useropt" : ".*[^-+._$as_cr_alnum]" >/dev/null &&
+      as_fn_error "invalid feature name: $ac_useropt"
+    ac_useropt_orig=$ac_useropt
+    ac_useropt=`$as_echo "$ac_useropt" | sed 's/[-+.]/_/g'`
+    case $ac_user_opts in
+      *"
+"enable_$ac_useropt"
+"*) ;;
+      *) ac_unrecognized_opts="$ac_unrecognized_opts$ac_unrecognized_sep--enable-$ac_useropt_orig"
+	 ac_unrecognized_sep=', ';;
     esac
-    eval "enable_$ac_feature='$ac_optarg'" ;;
+    eval enable_$ac_useropt=\$ac_optarg ;;
 
   -exec-prefix | --exec_prefix | --exec-prefix | --exec-prefi \
   | --exec-pref | --exec-pre | --exec-pr | --exec-p | --exec- \
@@ -405,6 +787,12 @@ do
   -host=* | --host=* | --hos=* | --ho=*)
     host_alias=$ac_optarg ;;
 
+  -htmldir | --htmldir | --htmldi | --htmld | --html | --htm | --ht)
+    ac_prev=htmldir ;;
+  -htmldir=* | --htmldir=* | --htmldi=* | --htmld=* | --html=* | --htm=* \
+  | --ht=*)
+    htmldir=$ac_optarg ;;
+
   -includedir | --includedir | --includedi | --included | --include \
   | --includ | --inclu | --incl | --inc)
     ac_prev=includedir ;;
@@ -429,13 +817,16 @@ do
   | --libexe=* | --libex=* | --libe=*)
     libexecdir=$ac_optarg ;;
 
+  -localedir | --localedir | --localedi | --localed | --locale)
+    ac_prev=localedir ;;
+  -localedir=* | --localedir=* | --localedi=* | --localed=* | --locale=*)
+    localedir=$ac_optarg ;;
+
   -localstatedir | --localstatedir | --localstatedi | --localstated \
-  | --localstate | --localstat | --localsta | --localst \
-  | --locals | --local | --loca | --loc | --lo)
+  | --localstate | --localstat | --localsta | --localst | --locals)
     ac_prev=localstatedir ;;
   -localstatedir=* | --localstatedir=* | --localstatedi=* | --localstated=* \
-  | --localstate=* | --localstat=* | --localsta=* | --localst=* \
-  | --locals=* | --local=* | --loca=* | --loc=* | --lo=*)
+  | --localstate=* | --localstat=* | --localsta=* | --localst=* | --locals=*)
     localstatedir=$ac_optarg ;;
 
   -mandir | --mandir | --mandi | --mand | --man | --ma | --m)
@@ -500,6 +891,16 @@ do
   | --progr-tra=* | --program-tr=* | --program-t=*)
     program_transform_name=$ac_optarg ;;
 
+  -pdfdir | --pdfdir | --pdfdi | --pdfd | --pdf | --pd)
+    ac_prev=pdfdir ;;
+  -pdfdir=* | --pdfdir=* | --pdfdi=* | --pdfd=* | --pdf=* | --pd=*)
+    pdfdir=$ac_optarg ;;
+
+  -psdir | --psdir | --psdi | --psd | --ps)
+    ac_prev=psdir ;;
+  -psdir=* | --psdir=* | --psdi=* | --psd=* | --ps=*)
+    psdir=$ac_optarg ;;
+
   -q | -quiet | --quiet | --quie | --qui | --qu | --q \
   | -silent | --silent | --silen | --sile | --sil)
     silent=yes ;;
@@ -550,26 +951,36 @@ do
     ac_init_version=: ;;
 
   -with-* | --with-*)
-    ac_package=`expr "x$ac_option" : 'x-*with-\([^=]*\)'`
+    ac_useropt=`expr "x$ac_option" : 'x-*with-\([^=]*\)'`
     # Reject names that are not valid shell variable names.
-    expr "x$ac_package" : ".*[^-_$as_cr_alnum]" >/dev/null &&
-      { echo "$as_me: error: invalid package name: $ac_package" >&2
-   { (exit 1); exit 1; }; }
-    ac_package=`echo $ac_package| sed 's/-/_/g'`
-    case $ac_option in
-      *=*) ac_optarg=`echo "$ac_optarg" | sed "s/'/'\\\\\\\\''/g"`;;
-      *) ac_optarg=yes ;;
+    expr "x$ac_useropt" : ".*[^-+._$as_cr_alnum]" >/dev/null &&
+      as_fn_error "invalid package name: $ac_useropt"
+    ac_useropt_orig=$ac_useropt
+    ac_useropt=`$as_echo "$ac_useropt" | sed 's/[-+.]/_/g'`
+    case $ac_user_opts in
+      *"
+"with_$ac_useropt"
+"*) ;;
+      *) ac_unrecognized_opts="$ac_unrecognized_opts$ac_unrecognized_sep--with-$ac_useropt_orig"
+	 ac_unrecognized_sep=', ';;
     esac
-    eval "with_$ac_package='$ac_optarg'" ;;
+    eval with_$ac_useropt=\$ac_optarg ;;
 
   -without-* | --without-*)
-    ac_package=`expr "x$ac_option" : 'x-*without-\(.*\)'`
+    ac_useropt=`expr "x$ac_option" : 'x-*without-\(.*\)'`
     # Reject names that are not valid shell variable names.
-    expr "x$ac_package" : ".*[^-_$as_cr_alnum]" >/dev/null &&
-      { echo "$as_me: error: invalid package name: $ac_package" >&2
-   { (exit 1); exit 1; }; }
-    ac_package=`echo $ac_package | sed 's/-/_/g'`
-    eval "with_$ac_package=no" ;;
+    expr "x$ac_useropt" : ".*[^-+._$as_cr_alnum]" >/dev/null &&
+      as_fn_error "invalid package name: $ac_useropt"
+    ac_useropt_orig=$ac_useropt
+    ac_useropt=`$as_echo "$ac_useropt" | sed 's/[-+.]/_/g'`
+    case $ac_user_opts in
+      *"
+"with_$ac_useropt"
+"*) ;;
+      *) ac_unrecognized_opts="$ac_unrecognized_opts$ac_unrecognized_sep--without-$ac_useropt_orig"
+	 ac_unrecognized_sep=', ';;
+    esac
+    eval with_$ac_useropt=no ;;
 
   --x)
     # Obsolete; use --with-x.
@@ -589,26 +1000,25 @@ do
   | --x-librar=* | --x-libra=* | --x-libr=* | --x-lib=* | --x-li=* | --x-l=*)
     x_libraries=$ac_optarg ;;
 
-  -*) { echo "$as_me: error: unrecognized option: $ac_option
-Try \`$0 --help' for more information." >&2
-   { (exit 1); exit 1; }; }
+  -*) as_fn_error "unrecognized option: \`$ac_option'
+Try \`$0 --help' for more information."
     ;;
 
   *=*)
     ac_envvar=`expr "x$ac_option" : 'x\([^=]*\)='`
     # Reject names that are not valid shell variable names.
-    expr "x$ac_envvar" : ".*[^_$as_cr_alnum]" >/dev/null &&
-      { echo "$as_me: error: invalid variable name: $ac_envvar" >&2
-   { (exit 1); exit 1; }; }
-    ac_optarg=`echo "$ac_optarg" | sed "s/'/'\\\\\\\\''/g"`
-    eval "$ac_envvar='$ac_optarg'"
+    case $ac_envvar in #(
+      '' | [0-9]* | *[!_$as_cr_alnum]* )
+      as_fn_error "invalid variable name: \`$ac_envvar'" ;;
+    esac
+    eval $ac_envvar=\$ac_optarg
     export $ac_envvar ;;
 
   *)
     # FIXME: should be removed in autoconf 3.0.
-    echo "$as_me: WARNING: you should use --build, --host, --target" >&2
+    $as_echo "$as_me: WARNING: you should use --build, --host, --target" >&2
     expr "x$ac_option" : ".*[^-._$as_cr_alnum]" >/dev/null &&
-      echo "$as_me: WARNING: invalid host type: $ac_option" >&2
+      $as_echo "$as_me: WARNING: invalid host type: $ac_option" >&2
     : ${build_alias=$ac_option} ${host_alias=$ac_option} ${target_alias=$ac_option}
     ;;
 
@@ -617,31 +1027,36 @@ done
 
 if test -n "$ac_prev"; then
   ac_option=--`echo $ac_prev | sed 's/_/-/g'`
-  { echo "$as_me: error: missing argument to $ac_option" >&2
-   { (exit 1); exit 1; }; }
+  as_fn_error "missing argument to $ac_option"
 fi
 
-# Be sure to have absolute paths.
-for ac_var in exec_prefix prefix
-do
-  eval ac_val=$`echo $ac_var`
-  case $ac_val in
-    [\\/$]* | ?:[\\/]* | NONE | '' ) ;;
-    *)  { echo "$as_me: error: expected an absolute directory name for --$ac_var: $ac_val" >&2
-   { (exit 1); exit 1; }; };;
+if test -n "$ac_unrecognized_opts"; then
+  case $enable_option_checking in
+    no) ;;
+    fatal) as_fn_error "unrecognized options: $ac_unrecognized_opts" ;;
+    *)     $as_echo "$as_me: WARNING: unrecognized options: $ac_unrecognized_opts" >&2 ;;
   esac
-done
+fi
 
-# Be sure to have absolute paths.
-for ac_var in bindir sbindir libexecdir datadir sysconfdir sharedstatedir \
-	      localstatedir libdir includedir oldincludedir infodir mandir
+# Check all directory arguments for consistency.
+for ac_var in	exec_prefix prefix bindir sbindir libexecdir datarootdir \
+		datadir sysconfdir sharedstatedir localstatedir includedir \
+		oldincludedir docdir infodir htmldir dvidir pdfdir psdir \
+		libdir localedir mandir
 do
-  eval ac_val=$`echo $ac_var`
+  eval ac_val=\$$ac_var
+  # Remove trailing slashes.
+  case $ac_val in
+    */ )
+      ac_val=`expr "X$ac_val" : 'X\(.*[^/]\)' \| "X$ac_val" : 'X\(.*\)'`
+      eval $ac_var=\$ac_val;;
+  esac
+  # Be sure to have absolute directory names.
   case $ac_val in
-    [\\/$]* | ?:[\\/]* ) ;;
-    *)  { echo "$as_me: error: expected an absolute directory name for --$ac_var: $ac_val" >&2
-   { (exit 1); exit 1; }; };;
+    [\\/$]* | ?:[\\/]* )  continue;;
+    NONE | '' ) case $ac_var in *prefix ) continue;; esac;;
   esac
+  as_fn_error "expected an absolute directory name for --$ac_var: $ac_val"
 done
 
 # There might be people who depend on the old broken behavior: `$host'
@@ -655,7 +1070,7 @@ target=$target_alias
 if test "x$host_alias" != x; then
   if test "x$build_alias" = x; then
     cross_compiling=maybe
-    echo "$as_me: WARNING: If you wanted to set the --build type, don't use --host.
+    $as_echo "$as_me: WARNING: If you wanted to set the --build type, don't use --host.
     If a cross compiler is detected then cross compile mode will be used." >&2
   elif test "x$build_alias" != "x$host_alias"; then
     cross_compiling=yes
@@ -668,54 +1083,72 @@ test -n "$host_alias" && ac_tool_prefix=$host_alias-
 test "$silent" = yes && exec 6>/dev/null
 
 
+ac_pwd=`pwd` && test -n "$ac_pwd" &&
+ac_ls_di=`ls -di .` &&
+ac_pwd_ls_di=`cd "$ac_pwd" && ls -di .` ||
+  as_fn_error "working directory cannot be determined"
+test "X$ac_ls_di" = "X$ac_pwd_ls_di" ||
+  as_fn_error "pwd does not report name of working directory"
+
+
 # Find the source files, if location was not specified.
 if test -z "$srcdir"; then
   ac_srcdir_defaulted=yes
-  # Try the directory containing this script, then its parent.
-  ac_confdir=`(dirname "$0") 2>/dev/null ||
-$as_expr X"$0" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
-	 X"$0" : 'X\(//\)[^/]' \| \
-	 X"$0" : 'X\(//\)$' \| \
-	 X"$0" : 'X\(/\)' \| \
-	 .     : '\(.\)' 2>/dev/null ||
-echo X"$0" |
-    sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/; q; }
-  	  /^X\(\/\/\)[^/].*/{ s//\1/; q; }
-  	  /^X\(\/\/\)$/{ s//\1/; q; }
-  	  /^X\(\/\).*/{ s//\1/; q; }
-  	  s/.*/./; q'`
+  # Try the directory containing this script, then the parent directory.
+  ac_confdir=`$as_dirname -- "$as_myself" ||
+$as_expr X"$as_myself" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
+	 X"$as_myself" : 'X\(//\)[^/]' \| \
+	 X"$as_myself" : 'X\(//\)$' \| \
+	 X"$as_myself" : 'X\(/\)' \| . 2>/dev/null ||
+$as_echo X"$as_myself" |
+    sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{
+	    s//\1/
+	    q
+	  }
+	  /^X\(\/\/\)[^/].*/{
+	    s//\1/
+	    q
+	  }
+	  /^X\(\/\/\)$/{
+	    s//\1/
+	    q
+	  }
+	  /^X\(\/\).*/{
+	    s//\1/
+	    q
+	  }
+	  s/.*/./; q'`
   srcdir=$ac_confdir
-  if test ! -r $srcdir/$ac_unique_file; then
+  if test ! -r "$srcdir/$ac_unique_file"; then
     srcdir=..
   fi
 else
   ac_srcdir_defaulted=no
 fi
-if test ! -r $srcdir/$ac_unique_file; then
-  if test "$ac_srcdir_defaulted" = yes; then
-    { echo "$as_me: error: cannot find sources ($ac_unique_file) in $ac_confdir or .." >&2
-   { (exit 1); exit 1; }; }
-  else
-    { echo "$as_me: error: cannot find sources ($ac_unique_file) in $srcdir" >&2
-   { (exit 1); exit 1; }; }
-  fi
+if test ! -r "$srcdir/$ac_unique_file"; then
+  test "$ac_srcdir_defaulted" = yes && srcdir="$ac_confdir or .."
+  as_fn_error "cannot find sources ($ac_unique_file) in $srcdir"
+fi
+ac_msg="sources are in $srcdir, but \`cd $srcdir' does not work"
+ac_abs_confdir=`(
+	cd "$srcdir" && test -r "./$ac_unique_file" || as_fn_error "$ac_msg"
+	pwd)`
+# When building in place, set srcdir=.
+if test "$ac_abs_confdir" = "$ac_pwd"; then
+  srcdir=.
 fi
-(cd $srcdir && test -r ./$ac_unique_file) 2>/dev/null ||
-  { echo "$as_me: error: sources are in $srcdir, but \`cd $srcdir' does not work" >&2
-   { (exit 1); exit 1; }; }
-srcdir=`echo "$srcdir" | sed 's%\([^\\/]\)[\\/]*$%\1%'`
-ac_env_build_alias_set=${build_alias+set}
-ac_env_build_alias_value=$build_alias
-ac_cv_env_build_alias_set=${build_alias+set}
-ac_cv_env_build_alias_value=$build_alias
-ac_env_host_alias_set=${host_alias+set}
-ac_env_host_alias_value=$host_alias
-ac_cv_env_host_alias_set=${host_alias+set}
-ac_cv_env_host_alias_value=$host_alias
-ac_env_target_alias_set=${target_alias+set}
-ac_env_target_alias_value=$target_alias
-ac_cv_env_target_alias_set=${target_alias+set}
-ac_cv_env_target_alias_value=$target_alias
+# Remove unnecessary trailing slashes from srcdir.
+# Double slashes in file names in object file debugging info
+# mess up M-x gdb in Emacs.
+case $srcdir in
+*/) srcdir=`expr "X$srcdir" : 'X\(.*[^/]\)' \| "X$srcdir" : 'X\(.*\)'`;;
+esac
+for ac_var in $ac_precious_vars; do
+  eval ac_env_${ac_var}_set=\${${ac_var}+set}
+  eval ac_env_${ac_var}_value=\$${ac_var}
+  eval ac_cv_env_${ac_var}_set=\${${ac_var}+set}
+  eval ac_cv_env_${ac_var}_value=\$${ac_var}
+done
 
 #
 # Report the --help message.
@@ -744,14 +1177,11 @@ Configuration:
   -n, --no-create         do not create output files
       --srcdir=DIR        find the sources in DIR [configure dir or \`..']
 
-_ACEOF
-
-  cat <<_ACEOF
 Installation directories:
   --prefix=PREFIX         install architecture-independent files in PREFIX
-			  [$ac_default_prefix]
+                          [$ac_default_prefix]
   --exec-prefix=EPREFIX   install architecture-dependent files in EPREFIX
-			  [PREFIX]
+                          [PREFIX]
 
 By default, \`make install' will install all the files in
 \`$ac_default_prefix/bin', \`$ac_default_prefix/lib' etc.  You can specify
@@ -761,18 +1191,25 @@ for instance \`--prefix=\$HOME'.
 For better control, use the options below.
 
 Fine tuning of the installation directories:
-  --bindir=DIR           user executables [EPREFIX/bin]
-  --sbindir=DIR          system admin executables [EPREFIX/sbin]
-  --libexecdir=DIR       program executables [EPREFIX/libexec]
-  --datadir=DIR          read-only architecture-independent data [PREFIX/share]
-  --sysconfdir=DIR       read-only single-machine data [PREFIX/etc]
-  --sharedstatedir=DIR   modifiable architecture-independent data [PREFIX/com]
-  --localstatedir=DIR    modifiable single-machine data [PREFIX/var]
-  --libdir=DIR           object code libraries [EPREFIX/lib]
-  --includedir=DIR       C header files [PREFIX/include]
-  --oldincludedir=DIR    C header files for non-gcc [/usr/include]
-  --infodir=DIR          info documentation [PREFIX/info]
-  --mandir=DIR           man documentation [PREFIX/man]
+  --bindir=DIR            user executables [EPREFIX/bin]
+  --sbindir=DIR           system admin executables [EPREFIX/sbin]
+  --libexecdir=DIR        program executables [EPREFIX/libexec]
+  --sysconfdir=DIR        read-only single-machine data [PREFIX/etc]
+  --sharedstatedir=DIR    modifiable architecture-independent data [PREFIX/com]
+  --localstatedir=DIR     modifiable single-machine data [PREFIX/var]
+  --libdir=DIR            object code libraries [EPREFIX/lib]
+  --includedir=DIR        C header files [PREFIX/include]
+  --oldincludedir=DIR     C header files for non-gcc [/usr/include]
+  --datarootdir=DIR       read-only arch.-independent data root [PREFIX/share]
+  --datadir=DIR           read-only architecture-independent data [DATAROOTDIR]
+  --infodir=DIR           info documentation [DATAROOTDIR/info]
+  --localedir=DIR         locale-dependent data [DATAROOTDIR/locale]
+  --mandir=DIR            man documentation [DATAROOTDIR/man]
+  --docdir=DIR            documentation root [DATAROOTDIR/doc/PACKAGE]
+  --htmldir=DIR           html documentation [DOCDIR]
+  --dvidir=DIR            dvi documentation [DOCDIR]
+  --pdfdir=DIR            pdf documentation [DOCDIR]
+  --psdir=DIR             ps documentation [DOCDIR]
 _ACEOF
 
   cat <<\_ACEOF
@@ -788,119 +1225,93 @@ if test -n "$ac_init_help"; then
 
   cat <<\_ACEOF
 
+Report bugs to the package provider.
 _ACEOF
+ac_status=$?
 fi
 
 if test "$ac_init_help" = "recursive"; then
   # If there are subdirs, report their specific --help.
-  ac_popdir=`pwd`
   for ac_dir in : $ac_subdirs_all; do test "x$ac_dir" = x: && continue
-    test -d $ac_dir || continue
+    test -d "$ac_dir" ||
+      { cd "$srcdir" && ac_pwd=`pwd` && srcdir=. && test -d "$ac_dir"; } ||
+      continue
     ac_builddir=.
 
-if test "$ac_dir" != .; then
-  ac_dir_suffix=/`echo "$ac_dir" | sed 's,^\.[\\/],,'`
-  # A "../" for each directory in $ac_dir_suffix.
-  ac_top_builddir=`echo "$ac_dir_suffix" | sed 's,/[^\\/]*,../,g'`
-else
-  ac_dir_suffix= ac_top_builddir=
-fi
+case "$ac_dir" in
+.) ac_dir_suffix= ac_top_builddir_sub=. ac_top_build_prefix= ;;
+*)
+  ac_dir_suffix=/`$as_echo "$ac_dir" | sed 's|^\.[\\/]||'`
+  # A ".." for each directory in $ac_dir_suffix.
+  ac_top_builddir_sub=`$as_echo "$ac_dir_suffix" | sed 's|/[^\\/]*|/..|g;s|/||'`
+  case $ac_top_builddir_sub in
+  "") ac_top_builddir_sub=. ac_top_build_prefix= ;;
+  *)  ac_top_build_prefix=$ac_top_builddir_sub/ ;;
+  esac ;;
+esac
+ac_abs_top_builddir=$ac_pwd
+ac_abs_builddir=$ac_pwd$ac_dir_suffix
+# for backward compatibility:
+ac_top_builddir=$ac_top_build_prefix
 
 case $srcdir in
-  .)  # No --srcdir option.  We are building in place.
+  .)  # We are building in place.
     ac_srcdir=.
-    if test -z "$ac_top_builddir"; then
-       ac_top_srcdir=.
-    else
-       ac_top_srcdir=`echo $ac_top_builddir | sed 's,/$,,'`
-    fi ;;
-  [\\/]* | ?:[\\/]* )  # Absolute path.
+    ac_top_srcdir=$ac_top_builddir_sub
+    ac_abs_top_srcdir=$ac_pwd ;;
+  [\\/]* | ?:[\\/]* )  # Absolute name.
     ac_srcdir=$srcdir$ac_dir_suffix;
-    ac_top_srcdir=$srcdir ;;
-  *) # Relative path.
-    ac_srcdir=$ac_top_builddir$srcdir$ac_dir_suffix
-    ac_top_srcdir=$ac_top_builddir$srcdir ;;
+    ac_top_srcdir=$srcdir
+    ac_abs_top_srcdir=$srcdir ;;
+  *) # Relative name.
+    ac_srcdir=$ac_top_build_prefix$srcdir$ac_dir_suffix
+    ac_top_srcdir=$ac_top_build_prefix$srcdir
+    ac_abs_top_srcdir=$ac_pwd/$srcdir ;;
 esac
-
-# Do not use `cd foo && pwd` to compute absolute paths, because
-# the directories may not exist.
-case `pwd` in
-.) ac_abs_builddir="$ac_dir";;
-*)
-  case "$ac_dir" in
-  .) ac_abs_builddir=`pwd`;;
-  [\\/]* | ?:[\\/]* ) ac_abs_builddir="$ac_dir";;
-  *) ac_abs_builddir=`pwd`/"$ac_dir";;
-  esac;;
-esac
-case $ac_abs_builddir in
-.) ac_abs_top_builddir=${ac_top_builddir}.;;
-*)
-  case ${ac_top_builddir}. in
-  .) ac_abs_top_builddir=$ac_abs_builddir;;
-  [\\/]* | ?:[\\/]* ) ac_abs_top_builddir=${ac_top_builddir}.;;
-  *) ac_abs_top_builddir=$ac_abs_builddir/${ac_top_builddir}.;;
-  esac;;
-esac
-case $ac_abs_builddir in
-.) ac_abs_srcdir=$ac_srcdir;;
-*)
-  case $ac_srcdir in
-  .) ac_abs_srcdir=$ac_abs_builddir;;
-  [\\/]* | ?:[\\/]* ) ac_abs_srcdir=$ac_srcdir;;
-  *) ac_abs_srcdir=$ac_abs_builddir/$ac_srcdir;;
-  esac;;
-esac
-case $ac_abs_builddir in
-.) ac_abs_top_srcdir=$ac_top_srcdir;;
-*)
-  case $ac_top_srcdir in
-  .) ac_abs_top_srcdir=$ac_abs_builddir;;
-  [\\/]* | ?:[\\/]* ) ac_abs_top_srcdir=$ac_top_srcdir;;
-  *) ac_abs_top_srcdir=$ac_abs_builddir/$ac_top_srcdir;;
-  esac;;
-esac
-
-    cd $ac_dir
-    # Check for guested configure; otherwise get Cygnus style configure.
-    if test -f $ac_srcdir/configure.gnu; then
-      echo
-      $SHELL $ac_srcdir/configure.gnu  --help=recursive
-    elif test -f $ac_srcdir/configure; then
-      echo
-      $SHELL $ac_srcdir/configure  --help=recursive
-    elif test -f $ac_srcdir/configure.ac ||
-	   test -f $ac_srcdir/configure.in; then
-      echo
-      $ac_configure --help
+ac_abs_srcdir=$ac_abs_top_srcdir$ac_dir_suffix
+
+    cd "$ac_dir" || { ac_status=$?; continue; }
+    # Check for guested configure.
+    if test -f "$ac_srcdir/configure.gnu"; then
+      echo &&
+      $SHELL "$ac_srcdir/configure.gnu" --help=recursive
+    elif test -f "$ac_srcdir/configure"; then
+      echo &&
+      $SHELL "$ac_srcdir/configure" --help=recursive
     else
-      echo "$as_me: WARNING: no configuration information is in $ac_dir" >&2
-    fi
-    cd $ac_popdir
+      $as_echo "$as_me: WARNING: no configuration information is in $ac_dir" >&2
+    fi || ac_status=$?
+    cd "$ac_pwd" || { ac_status=$?; break; }
   done
 fi
 
-test -n "$ac_init_help" && exit 0
+test -n "$ac_init_help" && exit $ac_status
 if $ac_init_version; then
   cat <<\_ACEOF
+configure
+generated by GNU Autoconf 2.64
 
-Copyright (C) 2003 Free Software Foundation, Inc.
+Copyright (C) 2009 Free Software Foundation, Inc.
 This configure script is free software; the Free Software Foundation
 gives unlimited permission to copy, distribute and modify it.
 _ACEOF
-  exit 0
+  exit
 fi
-exec 5>config.log
-cat >&5 <<_ACEOF
+
+## ------------------------ ##
+## Autoconf initialization. ##
+## ------------------------ ##
+cat >config.log <<_ACEOF
 This file contains any messages produced by compilers while
 running configure, to aid debugging if configure makes a mistake.
 
 It was created by $as_me, which was
-generated by GNU Autoconf 2.59.  Invocation command line was
+generated by GNU Autoconf 2.64.  Invocation command line was
 
   $ $0 $@
 
 _ACEOF
+exec 5>>config.log
 {
 cat <<_ASUNAME
 ## --------- ##
@@ -919,7 +1330,7 @@ uname -v = `(uname -v) 2>/dev/null || echo unknown`
 /bin/arch              = `(/bin/arch) 2>/dev/null              || echo unknown`
 /usr/bin/arch -k       = `(/usr/bin/arch -k) 2>/dev/null       || echo unknown`
 /usr/convex/getsysinfo = `(/usr/convex/getsysinfo) 2>/dev/null || echo unknown`
-hostinfo               = `(hostinfo) 2>/dev/null               || echo unknown`
+/usr/bin/hostinfo      = `(/usr/bin/hostinfo) 2>/dev/null      || echo unknown`
 /bin/machine           = `(/bin/machine) 2>/dev/null           || echo unknown`
 /usr/bin/oslevel       = `(/usr/bin/oslevel) 2>/dev/null       || echo unknown`
 /bin/universe          = `(/bin/universe) 2>/dev/null          || echo unknown`
@@ -931,8 +1342,9 @@ for as_dir in $PATH
 do
   IFS=$as_save_IFS
   test -z "$as_dir" && as_dir=.
-  echo "PATH: $as_dir"
-done
+    $as_echo "PATH: $as_dir"
+  done
+IFS=$as_save_IFS
 
 } >&5
 
@@ -954,7 +1366,6 @@ _ACEOF
 ac_configure_args=
 ac_configure_args0=
 ac_configure_args1=
-ac_sep=
 ac_must_keep_next=false
 for ac_pass in 1 2
 do
@@ -965,13 +1376,13 @@ do
     -q | -quiet | --quiet | --quie | --qui | --qu | --q \
     | -silent | --silent | --silen | --sile | --sil)
       continue ;;
-    *" "*|*"	"*|*[\[\]\~\#\$\^\&\*\(\)\{\}\\\|\;\<\>\?\"\']*)
-      ac_arg=`echo "$ac_arg" | sed "s/'/'\\\\\\\\''/g"` ;;
+    *\'*)
+      ac_arg=`$as_echo "$ac_arg" | sed "s/'/'\\\\\\\\''/g"` ;;
     esac
     case $ac_pass in
-    1) ac_configure_args0="$ac_configure_args0 '$ac_arg'" ;;
+    1) as_fn_append ac_configure_args0 " '$ac_arg'" ;;
     2)
-      ac_configure_args1="$ac_configure_args1 '$ac_arg'"
+      as_fn_append ac_configure_args1 " '$ac_arg'"
       if test $ac_must_keep_next = true; then
 	ac_must_keep_next=false # Got value, back to normal.
       else
@@ -987,21 +1398,19 @@ do
 	  -* ) ac_must_keep_next=true ;;
 	esac
       fi
-      ac_configure_args="$ac_configure_args$ac_sep'$ac_arg'"
-      # Get rid of the leading space.
-      ac_sep=" "
+      as_fn_append ac_configure_args " '$ac_arg'"
       ;;
     esac
   done
 done
-$as_unset ac_configure_args0 || test "${ac_configure_args0+set}" != set || { ac_configure_args0=; export ac_configure_args0; }
-$as_unset ac_configure_args1 || test "${ac_configure_args1+set}" != set || { ac_configure_args1=; export ac_configure_args1; }
+{ ac_configure_args0=; unset ac_configure_args0;}
+{ ac_configure_args1=; unset ac_configure_args1;}
 
 # When interrupted or exit'd, cleanup temporary files, and complete
 # config.log.  We remove comments because anyway the quotes in there
 # would cause problems or look ugly.
-# WARNING: Be sure not to use single quotes in there, as some shells,
-# such as our DU 5.0 friend, will then `close' the trap.
+# WARNING: Use '\'' to represent an apostrophe within the trap.
+# WARNING: Do not start the trap code with a newline, due to a FreeBSD 4.0 bug.
 trap 'exit_status=$?
   # Save into config.log some information that might help in debugging.
   {
@@ -1014,20 +1423,35 @@ trap 'exit_status=$?
 _ASBOX
     echo
     # The following way of writing the cache mishandles newlines in values,
-{
+(
+  for ac_var in `(set) 2>&1 | sed -n '\''s/^\([a-zA-Z_][a-zA-Z0-9_]*\)=.*/\1/p'\''`; do
+    eval ac_val=\$$ac_var
+    case $ac_val in #(
+    *${as_nl}*)
+      case $ac_var in #(
+      *_cv_*) { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: cache variable $ac_var contains a newline" >&5
+$as_echo "$as_me: WARNING: cache variable $ac_var contains a newline" >&2;} ;;
+      esac
+      case $ac_var in #(
+      _ | IFS | as_nl) ;; #(
+      BASH_ARGV | BASH_SOURCE) eval $ac_var= ;; #(
+      *) { eval $ac_var=; unset $ac_var;} ;;
+      esac ;;
+    esac
+  done
   (set) 2>&1 |
-    case `(ac_space='"'"' '"'"'; set | grep ac_space) 2>&1` in
-    *ac_space=\ *)
+    case $as_nl`(ac_space='\'' '\''; set) 2>&1` in #(
+    *${as_nl}ac_space=\ *)
       sed -n \
-	"s/'"'"'/'"'"'\\\\'"'"''"'"'/g;
-	  s/^\\([_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\\)=\\(.*\\)/\\1='"'"'\\2'"'"'/p"
-      ;;
+	"s/'\''/'\''\\\\'\'''\''/g;
+	  s/^\\([_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\\)=\\(.*\\)/\\1='\''\\2'\''/p"
+      ;; #(
     *)
-      sed -n \
-	"s/^\\([_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\\)=\\(.*\\)/\\1=\\2/p"
+      sed -n "/^[_$as_cr_alnum]*_cv_[_$as_cr_alnum]*=/p"
       ;;
-    esac;
-}
+    esac |
+    sort
+)
     echo
 
     cat <<\_ASBOX
@@ -1038,22 +1462,28 @@ _ASBOX
     echo
     for ac_var in $ac_subst_vars
     do
-      eval ac_val=$`echo $ac_var`
-      echo "$ac_var='"'"'$ac_val'"'"'"
+      eval ac_val=\$$ac_var
+      case $ac_val in
+      *\'\''*) ac_val=`$as_echo "$ac_val" | sed "s/'\''/'\''\\\\\\\\'\'''\''/g"`;;
+      esac
+      $as_echo "$ac_var='\''$ac_val'\''"
     done | sort
     echo
 
     if test -n "$ac_subst_files"; then
       cat <<\_ASBOX
-## ------------- ##
-## Output files. ##
-## ------------- ##
+## ------------------- ##
+## File substitutions. ##
+## ------------------- ##
 _ASBOX
       echo
       for ac_var in $ac_subst_files
       do
-	eval ac_val=$`echo $ac_var`
-	echo "$ac_var='"'"'$ac_val'"'"'"
+	eval ac_val=\$$ac_var
+	case $ac_val in
+	*\'\''*) ac_val=`$as_echo "$ac_val" | sed "s/'\''/'\''\\\\\\\\'\'''\''/g"`;;
+	esac
+	$as_echo "$ac_var='\''$ac_val'\''"
       done | sort
       echo
     fi
@@ -1065,26 +1495,26 @@ _ASBOX
 ## ----------- ##
 _ASBOX
       echo
-      sed "/^$/d" confdefs.h | sort
+      cat confdefs.h
       echo
     fi
     test "$ac_signal" != 0 &&
-      echo "$as_me: caught signal $ac_signal"
-    echo "$as_me: exit $exit_status"
+      $as_echo "$as_me: caught signal $ac_signal"
+    $as_echo "$as_me: exit $exit_status"
   } >&5
-  rm -f core *.core &&
-  rm -rf conftest* confdefs* conf$$* $ac_clean_files &&
+  rm -f core *.core core.conftest.* &&
+    rm -f -r conftest* confdefs* conf$$* $ac_clean_files &&
     exit $exit_status
-     ' 0
+' 0
 for ac_signal in 1 2 13 15; do
-  trap 'ac_signal='$ac_signal'; { (exit 1); exit 1; }' $ac_signal
+  trap 'ac_signal='$ac_signal'; as_fn_exit 1' $ac_signal
 done
 ac_signal=0
 
 # confdefs.h avoids OS command line length limits that DEFS can exceed.
-rm -rf conftest* confdefs.h
-# AIX cpp loses on an empty file, so make sure it contains at least a newline.
-echo >confdefs.h
+rm -f -r conftest* confdefs.h
+
+$as_echo "/* confdefs.h */" > confdefs.h
 
 # Predefined preprocessor variables.
 
@@ -1092,40 +1522,46 @@ cat >>confdefs.h <<_ACEOF
 #define PACKAGE_NAME "$PACKAGE_NAME"
 _ACEOF
 
-
 cat >>confdefs.h <<_ACEOF
 #define PACKAGE_TARNAME "$PACKAGE_TARNAME"
 _ACEOF
 
-
 cat >>confdefs.h <<_ACEOF
 #define PACKAGE_VERSION "$PACKAGE_VERSION"
 _ACEOF
 
-
 cat >>confdefs.h <<_ACEOF
 #define PACKAGE_STRING "$PACKAGE_STRING"
 _ACEOF
 
-
 cat >>confdefs.h <<_ACEOF
 #define PACKAGE_BUGREPORT "$PACKAGE_BUGREPORT"
 _ACEOF
 
+cat >>confdefs.h <<_ACEOF
+#define PACKAGE_URL "$PACKAGE_URL"
+_ACEOF
+
 
 # Let the site file select an alternate cache file if it wants to.
-# Prefer explicitly selected file to automatically selected ones.
-if test -z "$CONFIG_SITE"; then
-  if test "x$prefix" != xNONE; then
-    CONFIG_SITE="$prefix/share/config.site $prefix/etc/config.site"
-  else
-    CONFIG_SITE="$ac_default_prefix/share/config.site $ac_default_prefix/etc/config.site"
-  fi
+# Prefer an explicitly selected file to automatically selected ones.
+ac_site_file1=NONE
+ac_site_file2=NONE
+if test -n "$CONFIG_SITE"; then
+  ac_site_file1=$CONFIG_SITE
+elif test "x$prefix" != xNONE; then
+  ac_site_file1=$prefix/share/config.site
+  ac_site_file2=$prefix/etc/config.site
+else
+  ac_site_file1=$ac_default_prefix/share/config.site
+  ac_site_file2=$ac_default_prefix/etc/config.site
 fi
-for ac_site_file in $CONFIG_SITE; do
+for ac_site_file in "$ac_site_file1" "$ac_site_file2"
+do
+  test "x$ac_site_file" = xNONE && continue
   if test -r "$ac_site_file"; then
-    { echo "$as_me:$LINENO: loading site script $ac_site_file" >&5
-echo "$as_me: loading site script $ac_site_file" >&6;}
+    { $as_echo "$as_me:${as_lineno-$LINENO}: loading site script $ac_site_file" >&5
+$as_echo "$as_me: loading site script $ac_site_file" >&6;}
     sed 's/^/| /' "$ac_site_file" >&5
     . "$ac_site_file"
   fi
@@ -1135,69 +1571,79 @@ if test -r "$cache_file"; then
   # Some versions of bash will fail to source /dev/null (special
   # files actually), so we avoid doing that.
   if test -f "$cache_file"; then
-    { echo "$as_me:$LINENO: loading cache $cache_file" >&5
-echo "$as_me: loading cache $cache_file" >&6;}
+    { $as_echo "$as_me:${as_lineno-$LINENO}: loading cache $cache_file" >&5
+$as_echo "$as_me: loading cache $cache_file" >&6;}
     case $cache_file in
-      [\\/]* | ?:[\\/]* ) . $cache_file;;
-      *)                      . ./$cache_file;;
+      [\\/]* | ?:[\\/]* ) . "$cache_file";;
+      *)                      . "./$cache_file";;
     esac
   fi
 else
-  { echo "$as_me:$LINENO: creating cache $cache_file" >&5
-echo "$as_me: creating cache $cache_file" >&6;}
+  { $as_echo "$as_me:${as_lineno-$LINENO}: creating cache $cache_file" >&5
+$as_echo "$as_me: creating cache $cache_file" >&6;}
   >$cache_file
 fi
 
 # Check that the precious variables saved in the cache have kept the same
 # value.
 ac_cache_corrupted=false
-for ac_var in `(set) 2>&1 |
-	       sed -n 's/^ac_env_\([a-zA-Z_0-9]*\)_set=.*/\1/p'`; do
+for ac_var in $ac_precious_vars; do
   eval ac_old_set=\$ac_cv_env_${ac_var}_set
   eval ac_new_set=\$ac_env_${ac_var}_set
-  eval ac_old_val="\$ac_cv_env_${ac_var}_value"
-  eval ac_new_val="\$ac_env_${ac_var}_value"
+  eval ac_old_val=\$ac_cv_env_${ac_var}_value
+  eval ac_new_val=\$ac_env_${ac_var}_value
   case $ac_old_set,$ac_new_set in
     set,)
-      { echo "$as_me:$LINENO: error: \`$ac_var' was set to \`$ac_old_val' in the previous run" >&5
-echo "$as_me: error: \`$ac_var' was set to \`$ac_old_val' in the previous run" >&2;}
+      { $as_echo "$as_me:${as_lineno-$LINENO}: error: \`$ac_var' was set to \`$ac_old_val' in the previous run" >&5
+$as_echo "$as_me: error: \`$ac_var' was set to \`$ac_old_val' in the previous run" >&2;}
       ac_cache_corrupted=: ;;
     ,set)
-      { echo "$as_me:$LINENO: error: \`$ac_var' was not set in the previous run" >&5
-echo "$as_me: error: \`$ac_var' was not set in the previous run" >&2;}
+      { $as_echo "$as_me:${as_lineno-$LINENO}: error: \`$ac_var' was not set in the previous run" >&5
+$as_echo "$as_me: error: \`$ac_var' was not set in the previous run" >&2;}
       ac_cache_corrupted=: ;;
     ,);;
     *)
       if test "x$ac_old_val" != "x$ac_new_val"; then
-	{ echo "$as_me:$LINENO: error: \`$ac_var' has changed since the previous run:" >&5
-echo "$as_me: error: \`$ac_var' has changed since the previous run:" >&2;}
-	{ echo "$as_me:$LINENO:   former value:  $ac_old_val" >&5
-echo "$as_me:   former value:  $ac_old_val" >&2;}
-	{ echo "$as_me:$LINENO:   current value: $ac_new_val" >&5
-echo "$as_me:   current value: $ac_new_val" >&2;}
-	ac_cache_corrupted=:
+	# differences in whitespace do not lead to failure.
+	ac_old_val_w=`echo x $ac_old_val`
+	ac_new_val_w=`echo x $ac_new_val`
+	if test "$ac_old_val_w" != "$ac_new_val_w"; then
+	  { $as_echo "$as_me:${as_lineno-$LINENO}: error: \`$ac_var' has changed since the previous run:" >&5
+$as_echo "$as_me: error: \`$ac_var' has changed since the previous run:" >&2;}
+	  ac_cache_corrupted=:
+	else
+	  { $as_echo "$as_me:${as_lineno-$LINENO}: warning: ignoring whitespace changes in \`$ac_var' since the previous run:" >&5
+$as_echo "$as_me: warning: ignoring whitespace changes in \`$ac_var' since the previous run:" >&2;}
+	  eval $ac_var=\$ac_old_val
+	fi
+	{ $as_echo "$as_me:${as_lineno-$LINENO}:   former value:  \`$ac_old_val'" >&5
+$as_echo "$as_me:   former value:  \`$ac_old_val'" >&2;}
+	{ $as_echo "$as_me:${as_lineno-$LINENO}:   current value: \`$ac_new_val'" >&5
+$as_echo "$as_me:   current value: \`$ac_new_val'" >&2;}
       fi;;
   esac
   # Pass precious variables to config.status.
   if test "$ac_new_set" = set; then
     case $ac_new_val in
-    *" "*|*"	"*|*[\[\]\~\#\$\^\&\*\(\)\{\}\\\|\;\<\>\?\"\']*)
-      ac_arg=$ac_var=`echo "$ac_new_val" | sed "s/'/'\\\\\\\\''/g"` ;;
+    *\'*) ac_arg=$ac_var=`$as_echo "$ac_new_val" | sed "s/'/'\\\\\\\\''/g"` ;;
     *) ac_arg=$ac_var=$ac_new_val ;;
     esac
     case " $ac_configure_args " in
       *" '$ac_arg' "*) ;; # Avoid dups.  Use of quotes ensures accuracy.
-      *) ac_configure_args="$ac_configure_args '$ac_arg'" ;;
+      *) as_fn_append ac_configure_args " '$ac_arg'" ;;
     esac
   fi
 done
 if $ac_cache_corrupted; then
-  { echo "$as_me:$LINENO: error: changes in the environment can compromise the build" >&5
-echo "$as_me: error: changes in the environment can compromise the build" >&2;}
-  { { echo "$as_me:$LINENO: error: run \`make distclean' and/or \`rm $cache_file' and start over" >&5
-echo "$as_me: error: run \`make distclean' and/or \`rm $cache_file' and start over" >&2;}
-   { (exit 1); exit 1; }; }
+  { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5
+$as_echo "$as_me: error: in \`$ac_pwd':" >&2;}
+  { $as_echo "$as_me:${as_lineno-$LINENO}: error: changes in the environment can compromise the build" >&5
+$as_echo "$as_me: error: changes in the environment can compromise the build" >&2;}
+  as_fn_error "run \`make distclean' and/or \`rm $cache_file' and start over" "$LINENO" 5
 fi
+## -------------------- ##
+## Main body of script. ##
+## -------------------- ##
 
 ac_ext=c
 ac_cpp='$CPP $CPPFLAGS'
@@ -1207,124 +1653,133 @@ ac_compiler_gnu=$ac_cv_c_compiler_gnu
 
 
 
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
 CC=${CC-cc}
 
 ac_aux_dir=
-for ac_dir in `cd $srcdir;pwd`/../.. $srcdir/`cd $srcdir;pwd`/../..; do
-  if test -f $ac_dir/install-sh; then
-    ac_aux_dir=$ac_dir
-    ac_install_sh="$ac_aux_dir/install-sh -c"
-    break
-  elif test -f $ac_dir/install.sh; then
-    ac_aux_dir=$ac_dir
-    ac_install_sh="$ac_aux_dir/install.sh -c"
-    break
-  elif test -f $ac_dir/shtool; then
-    ac_aux_dir=$ac_dir
-    ac_install_sh="$ac_aux_dir/shtool install -c"
-    break
-  fi
+for ac_dir in `cd $srcdir;pwd`/../.. "$srcdir"/`cd $srcdir;pwd`/../..; do
+  for ac_t in install-sh install.sh shtool; do
+    if test -f "$ac_dir/$ac_t"; then
+      ac_aux_dir=$ac_dir
+      ac_install_sh="$ac_aux_dir/$ac_t -c"
+      break 2
+    fi
+  done
 done
 if test -z "$ac_aux_dir"; then
-  { { echo "$as_me:$LINENO: error: cannot find install-sh or install.sh in \`cd $srcdir;pwd\`/../.. $srcdir/\`cd $srcdir;pwd\`/../.." >&5
-echo "$as_me: error: cannot find install-sh or install.sh in \`cd $srcdir;pwd\`/../.. $srcdir/\`cd $srcdir;pwd\`/../.." >&2;}
-   { (exit 1); exit 1; }; }
+  as_fn_error "cannot find install-sh, install.sh, or shtool in \`cd $srcdir;pwd\`/../.. \"$srcdir\"/\`cd $srcdir;pwd\`/../.." "$LINENO" 5
 fi
-ac_config_guess="$SHELL $ac_aux_dir/config.guess"
-ac_config_sub="$SHELL $ac_aux_dir/config.sub"
-ac_configure="$SHELL $ac_aux_dir/configure" # This should be Cygnus configure.
+
+# These three variables are undocumented and unsupported,
+# and are intended to be withdrawn in a future Autoconf release.
+# They can cause serious problems if a builder's source tree is in a directory
+# whose full name contains unusual characters.
+ac_config_guess="$SHELL $ac_aux_dir/config.guess"  # Please don't use this var.
+ac_config_sub="$SHELL $ac_aux_dir/config.sub"  # Please don't use this var.
+ac_configure="$SHELL $ac_aux_dir/configure"  # Please don't use this var.
+
 
 # Make sure we can run config.sub.
-$ac_config_sub sun4 >/dev/null 2>&1 ||
-  { { echo "$as_me:$LINENO: error: cannot run $ac_config_sub" >&5
-echo "$as_me: error: cannot run $ac_config_sub" >&2;}
-   { (exit 1); exit 1; }; }
-
-echo "$as_me:$LINENO: checking build system type" >&5
-echo $ECHO_N "checking build system type... $ECHO_C" >&6
-if test "${ac_cv_build+set}" = set; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
+$SHELL "$ac_aux_dir/config.sub" sun4 >/dev/null 2>&1 ||
+  as_fn_error "cannot run $SHELL $ac_aux_dir/config.sub" "$LINENO" 5
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking build system type" >&5
+$as_echo_n "checking build system type... " >&6; }
+if test "${ac_cv_build+set}" = set; then :
+  $as_echo_n "(cached) " >&6
 else
-  ac_cv_build_alias=$build_alias
-test -z "$ac_cv_build_alias" &&
-  ac_cv_build_alias=`$ac_config_guess`
-test -z "$ac_cv_build_alias" &&
-  { { echo "$as_me:$LINENO: error: cannot guess build type; you must specify one" >&5
-echo "$as_me: error: cannot guess build type; you must specify one" >&2;}
-   { (exit 1); exit 1; }; }
-ac_cv_build=`$ac_config_sub $ac_cv_build_alias` ||
-  { { echo "$as_me:$LINENO: error: $ac_config_sub $ac_cv_build_alias failed" >&5
-echo "$as_me: error: $ac_config_sub $ac_cv_build_alias failed" >&2;}
-   { (exit 1); exit 1; }; }
+  ac_build_alias=$build_alias
+test "x$ac_build_alias" = x &&
+  ac_build_alias=`$SHELL "$ac_aux_dir/config.guess"`
+test "x$ac_build_alias" = x &&
+  as_fn_error "cannot guess build type; you must specify one" "$LINENO" 5
+ac_cv_build=`$SHELL "$ac_aux_dir/config.sub" $ac_build_alias` ||
+  as_fn_error "$SHELL $ac_aux_dir/config.sub $ac_build_alias failed" "$LINENO" 5
 
 fi
-echo "$as_me:$LINENO: result: $ac_cv_build" >&5
-echo "${ECHO_T}$ac_cv_build" >&6
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_build" >&5
+$as_echo "$ac_cv_build" >&6; }
+case $ac_cv_build in
+*-*-*) ;;
+*) as_fn_error "invalid value of canonical build" "$LINENO" 5;;
+esac
 build=$ac_cv_build
-build_cpu=`echo $ac_cv_build | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\1/'`
-build_vendor=`echo $ac_cv_build | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\2/'`
-build_os=`echo $ac_cv_build | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'`
-
-
-echo "$as_me:$LINENO: checking host system type" >&5
-echo $ECHO_N "checking host system type... $ECHO_C" >&6
-if test "${ac_cv_host+set}" = set; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
+ac_save_IFS=$IFS; IFS='-'
+set x $ac_cv_build
+shift
+build_cpu=$1
+build_vendor=$2
+shift; shift
+# Remember, the first character of IFS is used to create $*,
+# except with old shells:
+build_os=$*
+IFS=$ac_save_IFS
+case $build_os in *\ *) build_os=`echo "$build_os" | sed 's/ /-/g'`;; esac
+
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking host system type" >&5
+$as_echo_n "checking host system type... " >&6; }
+if test "${ac_cv_host+set}" = set; then :
+  $as_echo_n "(cached) " >&6
+else
+  if test "x$host_alias" = x; then
+  ac_cv_host=$ac_cv_build
 else
-  ac_cv_host_alias=$host_alias
-test -z "$ac_cv_host_alias" &&
-  ac_cv_host_alias=$ac_cv_build_alias
-ac_cv_host=`$ac_config_sub $ac_cv_host_alias` ||
-  { { echo "$as_me:$LINENO: error: $ac_config_sub $ac_cv_host_alias failed" >&5
-echo "$as_me: error: $ac_config_sub $ac_cv_host_alias failed" >&2;}
-   { (exit 1); exit 1; }; }
+  ac_cv_host=`$SHELL "$ac_aux_dir/config.sub" $host_alias` ||
+    as_fn_error "$SHELL $ac_aux_dir/config.sub $host_alias failed" "$LINENO" 5
+fi
 
 fi
-echo "$as_me:$LINENO: result: $ac_cv_host" >&5
-echo "${ECHO_T}$ac_cv_host" >&6
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_host" >&5
+$as_echo "$ac_cv_host" >&6; }
+case $ac_cv_host in
+*-*-*) ;;
+*) as_fn_error "invalid value of canonical host" "$LINENO" 5;;
+esac
 host=$ac_cv_host
-host_cpu=`echo $ac_cv_host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\1/'`
-host_vendor=`echo $ac_cv_host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\2/'`
-host_os=`echo $ac_cv_host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'`
-
-
-echo "$as_me:$LINENO: checking target system type" >&5
-echo $ECHO_N "checking target system type... $ECHO_C" >&6
-if test "${ac_cv_target+set}" = set; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
+ac_save_IFS=$IFS; IFS='-'
+set x $ac_cv_host
+shift
+host_cpu=$1
+host_vendor=$2
+shift; shift
+# Remember, the first character of IFS is used to create $*,
+# except with old shells:
+host_os=$*
+IFS=$ac_save_IFS
+case $host_os in *\ *) host_os=`echo "$host_os" | sed 's/ /-/g'`;; esac
+
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking target system type" >&5
+$as_echo_n "checking target system type... " >&6; }
+if test "${ac_cv_target+set}" = set; then :
+  $as_echo_n "(cached) " >&6
 else
-  ac_cv_target_alias=$target_alias
-test "x$ac_cv_target_alias" = "x" &&
-  ac_cv_target_alias=$ac_cv_host_alias
-ac_cv_target=`$ac_config_sub $ac_cv_target_alias` ||
-  { { echo "$as_me:$LINENO: error: $ac_config_sub $ac_cv_target_alias failed" >&5
-echo "$as_me: error: $ac_config_sub $ac_cv_target_alias failed" >&2;}
-   { (exit 1); exit 1; }; }
+  if test "x$target_alias" = x; then
+  ac_cv_target=$ac_cv_host
+else
+  ac_cv_target=`$SHELL "$ac_aux_dir/config.sub" $target_alias` ||
+    as_fn_error "$SHELL $ac_aux_dir/config.sub $target_alias failed" "$LINENO" 5
+fi
 
 fi
-echo "$as_me:$LINENO: result: $ac_cv_target" >&5
-echo "${ECHO_T}$ac_cv_target" >&6
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_target" >&5
+$as_echo "$ac_cv_target" >&6; }
+case $ac_cv_target in
+*-*-*) ;;
+*) as_fn_error "invalid value of canonical target" "$LINENO" 5;;
+esac
 target=$ac_cv_target
-target_cpu=`echo $ac_cv_target | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\1/'`
-target_vendor=`echo $ac_cv_target | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\2/'`
-target_os=`echo $ac_cv_target | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'`
+ac_save_IFS=$IFS; IFS='-'
+set x $ac_cv_target
+shift
+target_cpu=$1
+target_vendor=$2
+shift; shift
+# Remember, the first character of IFS is used to create $*,
+# except with old shells:
+target_os=$*
+IFS=$ac_save_IFS
+case $target_os in *\ *) target_os=`echo "$target_os" | sed 's/ /-/g'`;; esac
 
 
 # The aliases save the names the user supplied, while $host etc.
@@ -1334,6 +1789,7 @@ test -n "$target_alias" &&
     NONENONEs,x,x, &&
   program_prefix=${target_alias}-
 
+
 # Configure sub-directory for appropriate targets
 case ${target} in
     frv-*-elf )
@@ -1343,15 +1799,11 @@ subdirs="$subdirs frv-elf"
 
 	;;
     m32r-*-elf )
-
-
-subdirs="$subdirs m32r-elf"
+	subdirs="$subdirs m32r-elf"
 
 	;;
     mips64el-*-elf )
-
-
-subdirs="$subdirs mips64el-elf"
+        subdirs="$subdirs mips64el-elf"
 
 	;;
 esac
@@ -1364,7 +1816,8 @@ case $target in
 esac
 
 
-          ac_config_files="$ac_config_files Makefile"
+ac_config_files="$ac_config_files Makefile"
+
 cat >confcache <<\_ACEOF
 # This file is a shell script that caches the results of configure
 # tests run on this system so they can be shared between configure
@@ -1383,39 +1836,59 @@ _ACEOF
 
 # The following way of writing the cache mishandles newlines in values,
 # but we know of no workaround that is simple, portable, and efficient.
-# So, don't put newlines in cache variables' values.
+# So, we kill variables containing newlines.
 # Ultrix sh set writes to stderr and can't be redirected directly,
 # and sets the high bit in the cache file unless we assign to the vars.
-{
+(
+  for ac_var in `(set) 2>&1 | sed -n 's/^\([a-zA-Z_][a-zA-Z0-9_]*\)=.*/\1/p'`; do
+    eval ac_val=\$$ac_var
+    case $ac_val in #(
+    *${as_nl}*)
+      case $ac_var in #(
+      *_cv_*) { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: cache variable $ac_var contains a newline" >&5
+$as_echo "$as_me: WARNING: cache variable $ac_var contains a newline" >&2;} ;;
+      esac
+      case $ac_var in #(
+      _ | IFS | as_nl) ;; #(
+      BASH_ARGV | BASH_SOURCE) eval $ac_var= ;; #(
+      *) { eval $ac_var=; unset $ac_var;} ;;
+      esac ;;
+    esac
+  done
+
   (set) 2>&1 |
-    case `(ac_space=' '; set | grep ac_space) 2>&1` in
-    *ac_space=\ *)
-      # `set' does not quote correctly, so add quotes (double-quote
-      # substitution turns \\\\ into \\, and sed turns \\ into \).
+    case $as_nl`(ac_space=' '; set) 2>&1` in #(
+    *${as_nl}ac_space=\ *)
+      # `set' does not quote correctly, so add quotes: double-quote
+      # substitution turns \\\\ into \\, and sed turns \\ into \.
       sed -n \
 	"s/'/'\\\\''/g;
 	  s/^\\([_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\\)=\\(.*\\)/\\1='\\2'/p"
-      ;;
+      ;; #(
     *)
       # `set' quotes correctly as required by POSIX, so do not add quotes.
-      sed -n \
-	"s/^\\([_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\\)=\\(.*\\)/\\1=\\2/p"
+      sed -n "/^[_$as_cr_alnum]*_cv_[_$as_cr_alnum]*=/p"
       ;;
-    esac;
-} |
+    esac |
+    sort
+) |
   sed '
+     /^ac_cv_env_/b end
      t clear
-     : clear
+     :clear
      s/^\([^=]*\)=\(.*[{}].*\)$/test "${\1+set}" = set || &/
      t end
-     /^ac_cv_env/!s/^\([^=]*\)=\(.*\)$/\1=${\1=\2}/
-     : end' >>confcache
-if diff $cache_file confcache >/dev/null 2>&1; then :; else
-  if test -w $cache_file; then
-    test "x$cache_file" != "x/dev/null" && echo "updating cache $cache_file"
+     s/^\([^=]*\)=\(.*\)$/\1=${\1=\2}/
+     :end' >>confcache
+if diff "$cache_file" confcache >/dev/null 2>&1; then :; else
+  if test -w "$cache_file"; then
+    test "x$cache_file" != "x/dev/null" &&
+      { $as_echo "$as_me:${as_lineno-$LINENO}: updating cache $cache_file" >&5
+$as_echo "$as_me: updating cache $cache_file" >&6;}
     cat confcache >$cache_file
   else
-    echo "not updating unwritable cache $cache_file"
+    { $as_echo "$as_me:${as_lineno-$LINENO}: not updating unwritable cache $cache_file" >&5
+$as_echo "$as_me: not updating unwritable cache $cache_file" >&6;}
   fi
 fi
 rm -f confcache
@@ -1424,63 +1897,54 @@ test "x$prefix" = xNONE && prefix=$ac_default_prefix
 # Let make expand exec_prefix.
 test "x$exec_prefix" = xNONE && exec_prefix='${prefix}'
 
-# VPATH may cause trouble with some makes, so we remove $(srcdir),
-# ${srcdir} and @srcdir@ from VPATH if srcdir is ".", strip leading and
-# trailing colons and then remove the whole line if VPATH becomes empty
-# (actually we leave an empty line to preserve line numbers).
-if test "x$srcdir" = x.; then
-  ac_vpsub='/^[	 ]*VPATH[	 ]*=/{
-s/:*\$(srcdir):*/:/;
-s/:*\${srcdir}:*/:/;
-s/:*@srcdir@:*/:/;
-s/^\([^=]*=[	 ]*\):*/\1/;
-s/:*$//;
-s/^[^=]*=[	 ]*$//;
-}'
-fi
-
 # Transform confdefs.h into DEFS.
 # Protect against shell expansion while executing Makefile rules.
 # Protect against Makefile macro expansion.
 #
 # If the first sed substitution is executed (which looks for macros that
-# take arguments), then we branch to the quote section.  Otherwise,
+# take arguments), then branch to the quote section.  Otherwise,
 # look for a macro that doesn't take arguments.
-cat >confdef2opt.sed <<\_ACEOF
+ac_script='
+:mline
+/\\$/{
+ N
+ s,\\\n,,
+ b mline
+}
 t clear
-: clear
-s,^[	 ]*#[	 ]*define[	 ][	 ]*\([^	 (][^	 (]*([^)]*)\)[	 ]*\(.*\),-D\1=\2,g
+:clear
+s/^[	 ]*#[	 ]*define[	 ][	 ]*\([^	 (][^	 (]*([^)]*)\)[	 ]*\(.*\)/-D\1=\2/g
 t quote
-s,^[	 ]*#[	 ]*define[	 ][	 ]*\([^	 ][^	 ]*\)[	 ]*\(.*\),-D\1=\2,g
+s/^[	 ]*#[	 ]*define[	 ][	 ]*\([^	 ][^	 ]*\)[	 ]*\(.*\)/-D\1=\2/g
 t quote
-d
-: quote
-s,[	 `~#$^&*(){}\\|;'"<>?],\\&,g
-s,\[,\\&,g
-s,\],\\&,g
-s,\$,$$,g
-p
-_ACEOF
-# We use echo to avoid assuming a particular line-breaking character.
-# The extra dot is to prevent the shell from consuming trailing
-# line-breaks from the sub-command output.  A line-break within
-# single-quotes doesn't work because, if this script is created in a
-# platform that uses two characters for line-breaks (e.g., DOS), tr
-# would break.
-ac_LF_and_DOT=`echo; echo .`
-DEFS=`sed -n -f confdef2opt.sed confdefs.h | tr "$ac_LF_and_DOT" ' .'`
-rm -f confdef2opt.sed
+b any
+:quote
+s/[	 `~#$^&*(){}\\|;'\''"<>?]/\\&/g
+s/\[/\\&/g
+s/\]/\\&/g
+s/\$/$$/g
+H
+:any
+${
+	g
+	s/^\n//
+	s/\n/ /g
+	p
+}
+'
+DEFS=`sed -n "$ac_script" confdefs.h`
 
 
 ac_libobjs=
 ac_ltlibobjs=
 for ac_i in : $LIBOBJS; do test "x$ac_i" = x: && continue
   # 1. Remove the extension, and $U if already installed.
-  ac_i=`echo "$ac_i" |
-	 sed 's/\$U\././;s/\.o$//;s/\.obj$//'`
-  # 2. Add them.
-  ac_libobjs="$ac_libobjs $ac_i\$U.$ac_objext"
-  ac_ltlibobjs="$ac_ltlibobjs $ac_i"'$U.lo'
+  ac_script='s/\$U\././;s/\.o$//;s/\.obj$//'
+  ac_i=`$as_echo "$ac_i" | sed "$ac_script"`
+  # 2. Prepend LIBOBJDIR.  When used with automake>=1.10 LIBOBJDIR
+  #    will be set to the directory where LIBOBJS objects are built.
+  as_fn_append ac_libobjs " \${LIBOBJDIR}$ac_i\$U.$ac_objext"
+  as_fn_append ac_ltlibobjs " \${LIBOBJDIR}$ac_i"'$U.lo'
 done
 LIBOBJS=$ac_libobjs
 
@@ -1489,11 +1953,13 @@ LTLIBOBJS=$ac_ltlibobjs
 
 
 : ${CONFIG_STATUS=./config.status}
+ac_write_fail=0
 ac_clean_files_save=$ac_clean_files
 ac_clean_files="$ac_clean_files $CONFIG_STATUS"
-{ echo "$as_me:$LINENO: creating $CONFIG_STATUS" >&5
-echo "$as_me: creating $CONFIG_STATUS" >&6;}
-cat >$CONFIG_STATUS <<_ACEOF
+{ $as_echo "$as_me:${as_lineno-$LINENO}: creating $CONFIG_STATUS" >&5
+$as_echo "$as_me: creating $CONFIG_STATUS" >&6;}
+as_write_fail=0
+cat >$CONFIG_STATUS <<_ASEOF || as_write_fail=1
 #! $SHELL
 # Generated by $as_me.
 # Run this file to recreate the current configuration.
@@ -1503,81 +1969,252 @@ cat >$CONFIG_STATUS <<_ACEOF
 debug=false
 ac_cs_recheck=false
 ac_cs_silent=false
-SHELL=\${CONFIG_SHELL-$SHELL}
-_ACEOF
 
-cat >>$CONFIG_STATUS <<\_ACEOF
-## --------------------- ##
-## M4sh Initialization.  ##
-## --------------------- ##
-
-# Be Bourne compatible
-if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then
+SHELL=\${CONFIG_SHELL-$SHELL}
+export SHELL
+_ASEOF
+cat >>$CONFIG_STATUS <<\_ASEOF || as_write_fail=1
+## -------------------- ##
+## M4sh Initialization. ##
+## -------------------- ##
+
+# Be more Bourne compatible
+DUALCASE=1; export DUALCASE # for MKS sh
+if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then :
   emulate sh
   NULLCMD=:
-  # Zsh 3.x and 4.x performs word splitting on ${1+"$@"}, which
+  # Pre-4.2 versions of Zsh do word splitting on ${1+"$@"}, which
   # is contrary to our usage.  Disable this feature.
   alias -g '${1+"$@"}'='"$@"'
-elif test -n "${BASH_VERSION+set}" && (set -o posix) >/dev/null 2>&1; then
-  set -o posix
+  setopt NO_GLOB_SUBST
+else
+  case `(set -o) 2>/dev/null` in #(
+  *posix*) :
+    set -o posix ;; #(
+  *) :
+     ;;
+esac
 fi
-DUALCASE=1; export DUALCASE # for MKS sh
 
-# Support unset when possible.
-if ( (MAIL=60; unset MAIL) || exit) >/dev/null 2>&1; then
-  as_unset=unset
+
+as_nl='
+'
+export as_nl
+# Printing a long string crashes Solaris 7 /usr/bin/printf.
+as_echo='\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\'
+as_echo=$as_echo$as_echo$as_echo$as_echo$as_echo
+as_echo=$as_echo$as_echo$as_echo$as_echo$as_echo$as_echo
+# Prefer a ksh shell builtin over an external printf program on Solaris,
+# but without wasting forks for bash or zsh.
+if test -z "$BASH_VERSION$ZSH_VERSION" \
+    && (test "X`print -r -- $as_echo`" = "X$as_echo") 2>/dev/null; then
+  as_echo='print -r --'
+  as_echo_n='print -rn --'
+elif (test "X`printf %s $as_echo`" = "X$as_echo") 2>/dev/null; then
+  as_echo='printf %s\n'
+  as_echo_n='printf %s'
 else
-  as_unset=false
+  if test "X`(/usr/ucb/echo -n -n $as_echo) 2>/dev/null`" = "X-n $as_echo"; then
+    as_echo_body='eval /usr/ucb/echo -n "$1$as_nl"'
+    as_echo_n='/usr/ucb/echo -n'
+  else
+    as_echo_body='eval expr "X$1" : "X\\(.*\\)"'
+    as_echo_n_body='eval
+      arg=$1;
+      case $arg in #(
+      *"$as_nl"*)
+	expr "X$arg" : "X\\(.*\\)$as_nl";
+	arg=`expr "X$arg" : ".*$as_nl\\(.*\\)"`;;
+      esac;
+      expr "X$arg" : "X\\(.*\\)" | tr -d "$as_nl"
+    '
+    export as_echo_n_body
+    as_echo_n='sh -c $as_echo_n_body as_echo'
+  fi
+  export as_echo_body
+  as_echo='sh -c $as_echo_body as_echo'
 fi
 
+# The user is always right.
+if test "${PATH_SEPARATOR+set}" != set; then
+  PATH_SEPARATOR=:
+  (PATH='/bin;/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 && {
+    (PATH='/bin:/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 ||
+      PATH_SEPARATOR=';'
+  }
+fi
+
+
+# IFS
+# We need space, tab and new line, in precisely that order.  Quoting is
+# there to prevent editors from complaining about space-tab.
+# (If _AS_PATH_WALK were called with IFS unset, it would disable word
+# splitting by setting IFS to empty value.)
+IFS=" ""	$as_nl"
+
+# Find who we are.  Look in the path if we contain no directory separator.
+case $0 in #((
+  *[\\/]* ) as_myself=$0 ;;
+  *) as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    test -r "$as_dir/$0" && as_myself=$as_dir/$0 && break
+  done
+IFS=$as_save_IFS
+
+     ;;
+esac
+# We did not find ourselves, most probably we were run as `sh COMMAND'
+# in which case we are not to be found in the path.
+if test "x$as_myself" = x; then
+  as_myself=$0
+fi
+if test ! -f "$as_myself"; then
+  $as_echo "$as_myself: error: cannot find myself; rerun with an absolute file name" >&2
+  exit 1
+fi
 
-# Work around bugs in pre-3.0 UWIN ksh.
-$as_unset ENV MAIL MAILPATH
+# Unset variables that we do not need and which cause bugs (e.g. in
+# pre-3.0 UWIN ksh).  But do not cause bugs in bash 2.01; the "|| exit 1"
+# suppresses any "Segmentation fault" message there.  '((' could
+# trigger a bug in pdksh 5.2.14.
+for as_var in BASH_ENV ENV MAIL MAILPATH
+do eval test x\${$as_var+set} = xset \
+  && ( (unset $as_var) || exit 1) >/dev/null 2>&1 && unset $as_var || :
+done
 PS1='$ '
 PS2='> '
 PS4='+ '
 
 # NLS nuisances.
-for as_var in \
-  LANG LANGUAGE LC_ADDRESS LC_ALL LC_COLLATE LC_CTYPE LC_IDENTIFICATION \
-  LC_MEASUREMENT LC_MESSAGES LC_MONETARY LC_NAME LC_NUMERIC LC_PAPER \
-  LC_TELEPHONE LC_TIME
-do
-  if (set +x; test -z "`(eval $as_var=C; export $as_var) 2>&1`"); then
-    eval $as_var=C; export $as_var
-  else
-    $as_unset $as_var
+LC_ALL=C
+export LC_ALL
+LANGUAGE=C
+export LANGUAGE
+
+# CDPATH.
+(unset CDPATH) >/dev/null 2>&1 && unset CDPATH
+
+
+# as_fn_error ERROR [LINENO LOG_FD]
+# ---------------------------------
+# Output "`basename $0`: error: ERROR" to stderr. If LINENO and LOG_FD are
+# provided, also output the error to LOG_FD, referencing LINENO. Then exit the
+# script with status $?, using 1 if that was 0.
+as_fn_error ()
+{
+  as_status=$?; test $as_status -eq 0 && as_status=1
+  if test "$3"; then
+    as_lineno=${as_lineno-"$2"} as_lineno_stack=as_lineno_stack=$as_lineno_stack
+    $as_echo "$as_me:${as_lineno-$LINENO}: error: $1" >&$3
   fi
-done
+  $as_echo "$as_me: error: $1" >&2
+  as_fn_exit $as_status
+} # as_fn_error
 
-# Required to use basename.
-if expr a : '\(a\)' >/dev/null 2>&1; then
+
+# as_fn_set_status STATUS
+# -----------------------
+# Set $? to STATUS, without forking.
+as_fn_set_status ()
+{
+  return $1
+} # as_fn_set_status
+
+# as_fn_exit STATUS
+# -----------------
+# Exit the shell with STATUS, even in a "trap 0" or "set -e" context.
+as_fn_exit ()
+{
+  set +e
+  as_fn_set_status $1
+  exit $1
+} # as_fn_exit
+
+# as_fn_unset VAR
+# ---------------
+# Portably unset VAR.
+as_fn_unset ()
+{
+  { eval $1=; unset $1;}
+}
+as_unset=as_fn_unset
+# as_fn_append VAR VALUE
+# ----------------------
+# Append the text in VALUE to the end of the definition contained in VAR. Take
+# advantage of any shell optimizations that allow amortized linear growth over
+# repeated appends, instead of the typical quadratic growth present in naive
+# implementations.
+if (eval "as_var=1; as_var+=2; test x\$as_var = x12") 2>/dev/null; then :
+  eval 'as_fn_append ()
+  {
+    eval $1+=\$2
+  }'
+else
+  as_fn_append ()
+  {
+    eval $1=\$$1\$2
+  }
+fi # as_fn_append
+
+# as_fn_arith ARG...
+# ------------------
+# Perform arithmetic evaluation on the ARGs, and store the result in the
+# global $as_val. Take advantage of shells that can avoid forks. The arguments
+# must be portable across $(()) and expr.
+if (eval "test \$(( 1 + 1 )) = 2") 2>/dev/null; then :
+  eval 'as_fn_arith ()
+  {
+    as_val=$(( $* ))
+  }'
+else
+  as_fn_arith ()
+  {
+    as_val=`expr "$@" || test $? -eq 1`
+  }
+fi # as_fn_arith
+
+
+if expr a : '\(a\)' >/dev/null 2>&1 &&
+   test "X`expr 00001 : '.*\(...\)'`" = X001; then
   as_expr=expr
 else
   as_expr=false
 fi
 
-if (basename /) >/dev/null 2>&1 && test "X`basename / 2>&1`" = "X/"; then
+if (basename -- /) >/dev/null 2>&1 && test "X`basename -- / 2>&1`" = "X/"; then
   as_basename=basename
 else
   as_basename=false
 fi
 
+if (as_dir=`dirname -- /` && test "X$as_dir" = X/) >/dev/null 2>&1; then
+  as_dirname=dirname
+else
+  as_dirname=false
+fi
 
-# Name of the executable.
-as_me=`$as_basename "$0" ||
+as_me=`$as_basename -- "$0" ||
 $as_expr X/"$0" : '.*/\([^/][^/]*\)/*$' \| \
 	 X"$0" : 'X\(//\)$' \| \
-	 X"$0" : 'X\(/\)$' \| \
-	 .     : '\(.\)' 2>/dev/null ||
-echo X/"$0" |
-    sed '/^.*\/\([^/][^/]*\)\/*$/{ s//\1/; q; }
-  	  /^X\/\(\/\/\)$/{ s//\1/; q; }
-  	  /^X\/\(\/\).*/{ s//\1/; q; }
-  	  s/.*/./; q'`
+	 X"$0" : 'X\(/\)' \| . 2>/dev/null ||
+$as_echo X/"$0" |
+    sed '/^.*\/\([^/][^/]*\)\/*$/{
+	    s//\1/
+	    q
+	  }
+	  /^X\/\(\/\/\)$/{
+	    s//\1/
+	    q
+	  }
+	  /^X\/\(\/\).*/{
+	    s//\1/
+	    q
+	  }
+	  s/.*/./; q'`
 
-
-# PATH needs CR, and LINENO needs CR and PATH.
 # Avoid depending upon Character Ranges.
 as_cr_letters='abcdefghijklmnopqrstuvwxyz'
 as_cr_LETTERS='ABCDEFGHIJKLMNOPQRSTUVWXYZ'
@@ -1585,148 +2222,123 @@ as_cr_Letters=$as_cr_letters$as_cr_LETTERS
 as_cr_digits='0123456789'
 as_cr_alnum=$as_cr_Letters$as_cr_digits
 
-# The user is always right.
-if test "${PATH_SEPARATOR+set}" != set; then
-  echo "#! /bin/sh" >conf$$.sh
-  echo  "exit 0"   >>conf$$.sh
-  chmod +x conf$$.sh
-  if (PATH="/nonexistent;."; conf$$.sh) >/dev/null 2>&1; then
-    PATH_SEPARATOR=';'
-  else
-    PATH_SEPARATOR=:
-  fi
-  rm -f conf$$.sh
-fi
-
-
-  as_lineno_1=$LINENO
-  as_lineno_2=$LINENO
-  as_lineno_3=`(expr $as_lineno_1 + 1) 2>/dev/null`
-  test "x$as_lineno_1" != "x$as_lineno_2" &&
-  test "x$as_lineno_3"  = "x$as_lineno_2"  || {
-  # Find who we are.  Look in the path if we contain no path at all
-  # relative or not.
-  case $0 in
-    *[\\/]* ) as_myself=$0 ;;
-    *) as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
-  IFS=$as_save_IFS
-  test -z "$as_dir" && as_dir=.
-  test -r "$as_dir/$0" && as_myself=$as_dir/$0 && break
-done
-
-       ;;
-  esac
-  # We did not find ourselves, most probably we were run as `sh COMMAND'
-  # in which case we are not to be found in the path.
-  if test "x$as_myself" = x; then
-    as_myself=$0
-  fi
-  if test ! -f "$as_myself"; then
-    { { echo "$as_me:$LINENO: error: cannot find myself; rerun with an absolute path" >&5
-echo "$as_me: error: cannot find myself; rerun with an absolute path" >&2;}
-   { (exit 1); exit 1; }; }
-  fi
-  case $CONFIG_SHELL in
-  '')
-    as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in /bin$PATH_SEPARATOR/usr/bin$PATH_SEPARATOR$PATH
-do
-  IFS=$as_save_IFS
-  test -z "$as_dir" && as_dir=.
-  for as_base in sh bash ksh sh5; do
-	 case $as_dir in
-	 /*)
-	   if ("$as_dir/$as_base" -c '
-  as_lineno_1=$LINENO
-  as_lineno_2=$LINENO
-  as_lineno_3=`(expr $as_lineno_1 + 1) 2>/dev/null`
-  test "x$as_lineno_1" != "x$as_lineno_2" &&
-  test "x$as_lineno_3"  = "x$as_lineno_2" ') 2>/dev/null; then
-	     $as_unset BASH_ENV || test "${BASH_ENV+set}" != set || { BASH_ENV=; export BASH_ENV; }
-	     $as_unset ENV || test "${ENV+set}" != set || { ENV=; export ENV; }
-	     CONFIG_SHELL=$as_dir/$as_base
-	     export CONFIG_SHELL
-	     exec "$CONFIG_SHELL" "$0" ${1+"$@"}
-	   fi;;
-	 esac
-       done
-done
-;;
-  esac
-
-  # Create $as_me.lineno as a copy of $as_myself, but with $LINENO
-  # uniformly replaced by the line number.  The first 'sed' inserts a
-  # line-number line before each line; the second 'sed' does the real
-  # work.  The second script uses 'N' to pair each line-number line
-  # with the numbered line, and appends trailing '-' during
-  # substitution so that $LINENO is not a special case at line end.
-  # (Raja R Harinath suggested sed '=', and Paul Eggert wrote the
-  # second 'sed' script.  Blame Lee E. McMahon for sed's syntax.  :-)
-  sed '=' <$as_myself |
-    sed '
-      N
-      s,$,-,
-      : loop
-      s,^\(['$as_cr_digits']*\)\(.*\)[$]LINENO\([^'$as_cr_alnum'_]\),\1\2\1\3,
-      t loop
-      s,-$,,
-      s,^['$as_cr_digits']*\n,,
-    ' >$as_me.lineno &&
-  chmod +x $as_me.lineno ||
-    { { echo "$as_me:$LINENO: error: cannot create $as_me.lineno; rerun with a POSIX shell" >&5
-echo "$as_me: error: cannot create $as_me.lineno; rerun with a POSIX shell" >&2;}
-   { (exit 1); exit 1; }; }
-
-  # Don't try to exec as it changes $[0], causing all sort of problems
-  # (the dirname of $[0] is not the place where we might find the
-  # original and so on.  Autoconf is especially sensible to this).
-  . ./$as_me.lineno
-  # Exit status is that of the last command.
-  exit
-}
-
-
-case `echo "testing\c"; echo 1,2,3`,`echo -n testing; echo 1,2,3` in
-  *c*,-n*) ECHO_N= ECHO_C='
-' ECHO_T='	' ;;
-  *c*,*  ) ECHO_N=-n ECHO_C= ECHO_T= ;;
-  *)       ECHO_N= ECHO_C='\c' ECHO_T= ;;
+ECHO_C= ECHO_N= ECHO_T=
+case `echo -n x` in #(((((
+-n*)
+  case `echo 'xy\c'` in
+  *c*) ECHO_T='	';;	# ECHO_T is single tab character.
+  xy)  ECHO_C='\c';;
+  *)   echo `echo ksh88 bug on AIX 6.1` > /dev/null
+       ECHO_T='	';;
+  esac;;
+*)
+  ECHO_N='-n';;
 esac
 
-if expr a : '\(a\)' >/dev/null 2>&1; then
-  as_expr=expr
+rm -f conf$$ conf$$.exe conf$$.file
+if test -d conf$$.dir; then
+  rm -f conf$$.dir/conf$$.file
 else
-  as_expr=false
+  rm -f conf$$.dir
+  mkdir conf$$.dir 2>/dev/null
 fi
-
-rm -f conf$$ conf$$.exe conf$$.file
-echo >conf$$.file
-if ln -s conf$$.file conf$$ 2>/dev/null; then
-  # We could just check for DJGPP; but this test a) works b) is more generic
-  # and c) will remain valid once DJGPP supports symlinks (DJGPP 2.04).
-  if test -f conf$$.exe; then
-    # Don't use ln at all; we don't have any links
-    as_ln_s='cp -p'
-  else
+if (echo >conf$$.file) 2>/dev/null; then
+  if ln -s conf$$.file conf$$ 2>/dev/null; then
     as_ln_s='ln -s'
+    # ... but there are two gotchas:
+    # 1) On MSYS, both `ln -s file dir' and `ln file dir' fail.
+    # 2) DJGPP < 2.04 has no symlinks; `ln -s' creates a wrapper executable.
+    # In both cases, we have to default to `cp -p'.
+    ln -s conf$$.file conf$$.dir 2>/dev/null && test ! -f conf$$.exe ||
+      as_ln_s='cp -p'
+  elif ln conf$$.file conf$$ 2>/dev/null; then
+    as_ln_s=ln
+  else
+    as_ln_s='cp -p'
   fi
-elif ln conf$$.file conf$$ 2>/dev/null; then
-  as_ln_s=ln
 else
   as_ln_s='cp -p'
 fi
-rm -f conf$$ conf$$.exe conf$$.file
+rm -f conf$$ conf$$.exe conf$$.dir/conf$$.file conf$$.file
+rmdir conf$$.dir 2>/dev/null
+
+
+# as_fn_mkdir_p
+# -------------
+# Create "$as_dir" as a directory, including parents if necessary.
+as_fn_mkdir_p ()
+{
+
+  case $as_dir in #(
+  -*) as_dir=./$as_dir;;
+  esac
+  test -d "$as_dir" || eval $as_mkdir_p || {
+    as_dirs=
+    while :; do
+      case $as_dir in #(
+      *\'*) as_qdir=`$as_echo "$as_dir" | sed "s/'/'\\\\\\\\''/g"`;; #'(
+      *) as_qdir=$as_dir;;
+      esac
+      as_dirs="'$as_qdir' $as_dirs"
+      as_dir=`$as_dirname -- "$as_dir" ||
+$as_expr X"$as_dir" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
+	 X"$as_dir" : 'X\(//\)[^/]' \| \
+	 X"$as_dir" : 'X\(//\)$' \| \
+	 X"$as_dir" : 'X\(/\)' \| . 2>/dev/null ||
+$as_echo X"$as_dir" |
+    sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{
+	    s//\1/
+	    q
+	  }
+	  /^X\(\/\/\)[^/].*/{
+	    s//\1/
+	    q
+	  }
+	  /^X\(\/\/\)$/{
+	    s//\1/
+	    q
+	  }
+	  /^X\(\/\).*/{
+	    s//\1/
+	    q
+	  }
+	  s/.*/./; q'`
+      test -d "$as_dir" && break
+    done
+    test -z "$as_dirs" || eval "mkdir $as_dirs"
+  } || test -d "$as_dir" || as_fn_error "cannot create directory $as_dir"
 
+
+} # as_fn_mkdir_p
 if mkdir -p . 2>/dev/null; then
-  as_mkdir_p=:
+  as_mkdir_p='mkdir -p "$as_dir"'
 else
   test -d ./-p && rmdir ./-p
   as_mkdir_p=false
 fi
 
-as_executable_p="test -f"
+if test -x / >/dev/null 2>&1; then
+  as_test_x='test -x'
+else
+  if ls -dL / >/dev/null 2>&1; then
+    as_ls_L_option=L
+  else
+    as_ls_L_option=
+  fi
+  as_test_x='
+    eval sh -c '\''
+      if test -d "$1"; then
+	test -d "$1/.";
+      else
+	case $1 in #(
+	-*)set "./$1";;
+	esac;
+	case `ls -ld'$as_ls_L_option' "$1" 2>/dev/null` in #((
+	???[sx]*):;;*)false;;esac;fi
+    '\'' sh
+  '
+fi
+as_executable_p=$as_test_x
 
 # Sed expression to map a string onto a valid CPP name.
 as_tr_cpp="eval sed 'y%*$as_cr_letters%P$as_cr_LETTERS%;s%[^_$as_cr_alnum]%_%g'"
@@ -1735,31 +2347,20 @@ as_tr_cpp="eval sed 'y%*$as_cr_letters%P$as_cr_LETTERS%;s%[^_$as_cr_alnum]%_%g'"
 as_tr_sh="eval sed 'y%*+%pp%;s%[^_$as_cr_alnum]%_%g'"
 
 
-# IFS
-# We need space, tab and new line, in precisely that order.
-as_nl='
-'
-IFS=" 	$as_nl"
-
-# CDPATH.
-$as_unset CDPATH
-
 exec 6>&1
-
-# Open the log real soon, to keep \$[0] and so on meaningful, and to
+## ----------------------------------- ##
+## Main body of $CONFIG_STATUS script. ##
+## ----------------------------------- ##
+_ASEOF
+test $as_write_fail = 0 && chmod +x $CONFIG_STATUS || ac_write_fail=1
+
+cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1
+# Save the log message, to keep $0 and so on meaningful, and to
 # report actual input values of CONFIG_FILES etc. instead of their
-# values after options handling.  Logging --version etc. is OK.
-exec 5>>config.log
-{
-  echo
-  sed 'h;s/./-/g;s/^.../## /;s/...$/ ##/;p;x;p;x' <<_ASBOX
-## Running $as_me. ##
-_ASBOX
-} >&5
-cat >&5 <<_CSEOF
-
+# values after options handling.
+ac_log="
 This file was extended by $as_me, which was
-generated by GNU Autoconf 2.59.  Invocation command line was
+generated by GNU Autoconf 2.64.  Invocation command line was
 
   CONFIG_FILES    = $CONFIG_FILES
   CONFIG_HEADERS  = $CONFIG_HEADERS
@@ -1767,124 +2368,106 @@ generated by GNU Autoconf 2.59.  Invocation command line was
   CONFIG_COMMANDS = $CONFIG_COMMANDS
   $ $0 $@
 
-_CSEOF
-echo "on `(hostname || uname -n) 2>/dev/null | sed 1q`" >&5
-echo >&5
+on `(hostname || uname -n) 2>/dev/null | sed 1q`
+"
+
 _ACEOF
 
-# Files that config.status was made for.
-if test -n "$ac_config_files"; then
-  echo "config_files=\"$ac_config_files\"" >>$CONFIG_STATUS
-fi
+case $ac_config_files in *"
+"*) set x $ac_config_files; shift; ac_config_files=$*;;
+esac
 
-if test -n "$ac_config_headers"; then
-  echo "config_headers=\"$ac_config_headers\"" >>$CONFIG_STATUS
-fi
 
-if test -n "$ac_config_links"; then
-  echo "config_links=\"$ac_config_links\"" >>$CONFIG_STATUS
-fi
 
-if test -n "$ac_config_commands"; then
-  echo "config_commands=\"$ac_config_commands\"" >>$CONFIG_STATUS
-fi
+cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1
+# Files that config.status was made for.
+config_files="$ac_config_files"
 
-cat >>$CONFIG_STATUS <<\_ACEOF
+_ACEOF
 
+cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1
 ac_cs_usage="\
-\`$as_me' instantiates files from templates according to the
-current configuration.
+\`$as_me' instantiates files and other configuration actions
+from templates according to the current configuration.  Unless the files
+and actions are specified as TAGs, all are instantiated by default.
 
-Usage: $0 [OPTIONS] [FILE]...
+Usage: $0 [OPTION]... [TAG]...
 
   -h, --help       print this help, then exit
-  -V, --version    print version number, then exit
-  -q, --quiet      do not print progress messages
+  -V, --version    print version number and configuration settings, then exit
+  -q, --quiet, --silent
+                   do not print progress messages
   -d, --debug      don't remove temporary files
       --recheck    update $as_me by reconfiguring in the same conditions
-  --file=FILE[:TEMPLATE]
-		   instantiate the configuration file FILE
+      --file=FILE[:TEMPLATE]
+                   instantiate the configuration file FILE
 
 Configuration files:
 $config_files
 
-Report bugs to <bug-autoconf@gnu.org>."
-_ACEOF
+Report bugs to the package provider."
 
-cat >>$CONFIG_STATUS <<_ACEOF
+_ACEOF
+cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1
 ac_cs_version="\\
 config.status
-configured by $0, generated by GNU Autoconf 2.59,
-  with options \\"`echo "$ac_configure_args" | sed 's/[\\""\`\$]/\\\\&/g'`\\"
+configured by $0, generated by GNU Autoconf 2.64,
+  with options \\"`$as_echo "$ac_configure_args" | sed 's/^ //; s/[\\""\`\$]/\\\\&/g'`\\"
 
-Copyright (C) 2003 Free Software Foundation, Inc.
+Copyright (C) 2009 Free Software Foundation, Inc.
 This config.status script is free software; the Free Software Foundation
 gives unlimited permission to copy, distribute and modify it."
-srcdir=$srcdir
+
+ac_pwd='$ac_pwd'
+srcdir='$srcdir'
+test -n "\$AWK" || AWK=awk
 _ACEOF
 
-cat >>$CONFIG_STATUS <<\_ACEOF
-# If no file are specified by the user, then we need to provide default
-# value.  By we need to know if files were specified by the user.
+cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1
+# The default lists apply if the user does not specify any file.
 ac_need_defaults=:
 while test $# != 0
 do
   case $1 in
   --*=*)
-    ac_option=`expr "x$1" : 'x\([^=]*\)='`
-    ac_optarg=`expr "x$1" : 'x[^=]*=\(.*\)'`
+    ac_option=`expr "X$1" : 'X\([^=]*\)='`
+    ac_optarg=`expr "X$1" : 'X[^=]*=\(.*\)'`
     ac_shift=:
     ;;
-  -*)
+  *)
     ac_option=$1
     ac_optarg=$2
     ac_shift=shift
     ;;
-  *) # This is not an option, so the user has probably given explicit
-     # arguments.
-     ac_option=$1
-     ac_need_defaults=false;;
   esac
 
   case $ac_option in
   # Handling of the options.
-_ACEOF
-cat >>$CONFIG_STATUS <<\_ACEOF
   -recheck | --recheck | --rechec | --reche | --rech | --rec | --re | --r)
     ac_cs_recheck=: ;;
-  --version | --vers* | -V )
-    echo "$ac_cs_version"; exit 0 ;;
-  --he | --h)
-    # Conflict between --help and --header
-    { { echo "$as_me:$LINENO: error: ambiguous option: $1
-Try \`$0 --help' for more information." >&5
-echo "$as_me: error: ambiguous option: $1
-Try \`$0 --help' for more information." >&2;}
-   { (exit 1); exit 1; }; };;
-  --help | --hel | -h )
-    echo "$ac_cs_usage"; exit 0 ;;
-  --debug | --d* | -d )
+  --version | --versio | --versi | --vers | --ver | --ve | --v | -V )
+    $as_echo "$ac_cs_version"; exit ;;
+  --debug | --debu | --deb | --de | --d | -d )
     debug=: ;;
   --file | --fil | --fi | --f )
     $ac_shift
-    CONFIG_FILES="$CONFIG_FILES $ac_optarg"
-    ac_need_defaults=false;;
-  --header | --heade | --head | --hea )
-    $ac_shift
-    CONFIG_HEADERS="$CONFIG_HEADERS $ac_optarg"
+    case $ac_optarg in
+    *\'*) ac_optarg=`$as_echo "$ac_optarg" | sed "s/'/'\\\\\\\\''/g"` ;;
+    esac
+    as_fn_append CONFIG_FILES " '$ac_optarg'"
     ac_need_defaults=false;;
+  --he | --h |  --help | --hel | -h )
+    $as_echo "$ac_cs_usage"; exit ;;
   -q | -quiet | --quiet | --quie | --qui | --qu | --q \
   | -silent | --silent | --silen | --sile | --sil | --si | --s)
     ac_cs_silent=: ;;
 
   # This is an error.
-  -*) { { echo "$as_me:$LINENO: error: unrecognized option: $1
-Try \`$0 --help' for more information." >&5
-echo "$as_me: error: unrecognized option: $1
-Try \`$0 --help' for more information." >&2;}
-   { (exit 1); exit 1; }; } ;;
+  -*) as_fn_error "unrecognized option: \`$1'
+Try \`$0 --help' for more information." ;;
 
-  *) ac_config_targets="$ac_config_targets $1" ;;
+  *) as_fn_append ac_config_targets " $1"
+     ac_need_defaults=false ;;
 
   esac
   shift
@@ -1898,30 +2481,44 @@ if $ac_cs_silent; then
 fi
 
 _ACEOF
-cat >>$CONFIG_STATUS <<_ACEOF
+cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1
 if \$ac_cs_recheck; then
-  echo "running $SHELL $0 " $ac_configure_args \$ac_configure_extra_args " --no-create --no-recursion" >&6
-  exec $SHELL $0 $ac_configure_args \$ac_configure_extra_args --no-create --no-recursion
+  set X '$SHELL' '$0' $ac_configure_args \$ac_configure_extra_args --no-create --no-recursion
+  shift
+  \$as_echo "running CONFIG_SHELL=$SHELL \$*" >&6
+  CONFIG_SHELL='$SHELL'
+  export CONFIG_SHELL
+  exec "\$@"
 fi
 
 _ACEOF
+cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1
+exec 5>>config.log
+{
+  echo
+  sed 'h;s/./-/g;s/^.../## /;s/...$/ ##/;p;x;p;x' <<_ASBOX
+## Running $as_me. ##
+_ASBOX
+  $as_echo "$ac_log"
+} >&5
 
+_ACEOF
+cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1
+_ACEOF
 
+cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1
 
-
-
-cat >>$CONFIG_STATUS <<\_ACEOF
+# Handling of arguments.
 for ac_config_target in $ac_config_targets
 do
-  case "$ac_config_target" in
-  # Handling of arguments.
-  "Makefile" ) CONFIG_FILES="$CONFIG_FILES Makefile" ;;
-  *) { { echo "$as_me:$LINENO: error: invalid argument: $ac_config_target" >&5
-echo "$as_me: error: invalid argument: $ac_config_target" >&2;}
-   { (exit 1); exit 1; }; };;
+  case $ac_config_target in
+    "Makefile") CONFIG_FILES="$CONFIG_FILES Makefile" ;;
+
+  *) as_fn_error "invalid argument: \`$ac_config_target'" "$LINENO" 5;;
   esac
 done
 
+
 # If the user did not use the arguments to specify the items to instantiate,
 # then the envvar interface is used.  Set only those that are not.
 # We use the long form for the default assignment because of an extremely
@@ -1931,332 +2528,403 @@ if $ac_need_defaults; then
 fi
 
 # Have a temporary directory for convenience.  Make it in the build tree
-# simply because there is no reason to put it here, and in addition,
+# simply because there is no reason against having it here, and in addition,
 # creating and moving files from /tmp can sometimes cause problems.
-# Create a temporary directory, and hook for its removal unless debugging.
+# Hook for its removal unless debugging.
+# Note that there is a small window in which the directory will not be cleaned:
+# after its creation but before its name has been assigned to `$tmp'.
 $debug ||
 {
-  trap 'exit_status=$?; rm -rf $tmp && exit $exit_status' 0
-  trap '{ (exit 1); exit 1; }' 1 2 13 15
+  tmp=
+  trap 'exit_status=$?
+  { test -z "$tmp" || test ! -d "$tmp" || rm -fr "$tmp"; } && exit $exit_status
+' 0
+  trap 'as_fn_exit 1' 1 2 13 15
 }
-
 # Create a (secure) tmp directory for tmp files.
 
 {
-  tmp=`(umask 077 && mktemp -d -q "./confstatXXXXXX") 2>/dev/null` &&
+  tmp=`(umask 077 && mktemp -d "./confXXXXXX") 2>/dev/null` &&
   test -n "$tmp" && test -d "$tmp"
 }  ||
 {
-  tmp=./confstat$$-$RANDOM
-  (umask 077 && mkdir $tmp)
-} ||
+  tmp=./conf$$-$RANDOM
+  (umask 077 && mkdir "$tmp")
+} || as_fn_error "cannot create a temporary directory in ." "$LINENO" 5
+
+# Set up the scripts for CONFIG_FILES section.
+# No need to generate them if there are no CONFIG_FILES.
+# This happens for instance with `./config.status config.h'.
+if test -n "$CONFIG_FILES"; then
+
+
+ac_cr=`echo X | tr X '\015'`
+# On cygwin, bash can eat \r inside `` if the user requested igncr.
+# But we know of no other shell where ac_cr would be empty at this
+# point, so we can use a bashism as a fallback.
+if test "x$ac_cr" = x; then
+  eval ac_cr=\$\'\\r\'
+fi
+ac_cs_awk_cr=`$AWK 'BEGIN { print "a\rb" }' </dev/null 2>/dev/null`
+if test "$ac_cs_awk_cr" = "a${ac_cr}b"; then
+  ac_cs_awk_cr='\r'
+else
+  ac_cs_awk_cr=$ac_cr
+fi
+
+echo 'BEGIN {' >"$tmp/subs1.awk" &&
+_ACEOF
+
+
+{
+  echo "cat >conf$$subs.awk <<_ACEOF" &&
+  echo "$ac_subst_vars" | sed 's/.*/&!$&$ac_delim/' &&
+  echo "_ACEOF"
+} >conf$$subs.sh ||
+  as_fn_error "could not make $CONFIG_STATUS" "$LINENO" 5
+ac_delim_num=`echo "$ac_subst_vars" | grep -c '$'`
+ac_delim='%!_!# '
+for ac_last_try in false false false false false :; do
+  . ./conf$$subs.sh ||
+    as_fn_error "could not make $CONFIG_STATUS" "$LINENO" 5
+
+  ac_delim_n=`sed -n "s/.*$ac_delim\$/X/p" conf$$subs.awk | grep -c X`
+  if test $ac_delim_n = $ac_delim_num; then
+    break
+  elif $ac_last_try; then
+    as_fn_error "could not make $CONFIG_STATUS" "$LINENO" 5
+  else
+    ac_delim="$ac_delim!$ac_delim _$ac_delim!! "
+  fi
+done
+rm -f conf$$subs.sh
+
+cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1
+cat >>"\$tmp/subs1.awk" <<\\_ACAWK &&
+_ACEOF
+sed -n '
+h
+s/^/S["/; s/!.*/"]=/
+p
+g
+s/^[^!]*!//
+:repl
+t repl
+s/'"$ac_delim"'$//
+t delim
+:nl
+h
+s/\(.\{148\}\).*/\1/
+t more1
+s/["\\]/\\&/g; s/^/"/; s/$/\\n"\\/
+p
+n
+b repl
+:more1
+s/["\\]/\\&/g; s/^/"/; s/$/"\\/
+p
+g
+s/.\{148\}//
+t nl
+:delim
+h
+s/\(.\{148\}\).*/\1/
+t more2
+s/["\\]/\\&/g; s/^/"/; s/$/"/
+p
+b
+:more2
+s/["\\]/\\&/g; s/^/"/; s/$/"\\/
+p
+g
+s/.\{148\}//
+t delim
+' <conf$$subs.awk | sed '
+/^[^""]/{
+  N
+  s/\n//
+}
+' >>$CONFIG_STATUS || ac_write_fail=1
+rm -f conf$$subs.awk
+cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1
+_ACAWK
+cat >>"\$tmp/subs1.awk" <<_ACAWK &&
+  for (key in S) S_is_set[key] = 1
+  FS = ""
+
+}
 {
-   echo "$me: cannot create a temporary directory in ." >&2
-   { (exit 1); exit 1; }
+  line = $ 0
+  nfields = split(line, field, "@")
+  substed = 0
+  len = length(field[1])
+  for (i = 2; i < nfields; i++) {
+    key = field[i]
+    keylen = length(key)
+    if (S_is_set[key]) {
+      value = S[key]
+      line = substr(line, 1, len) "" value "" substr(line, len + keylen + 3)
+      len += length(value) + length(field[++i])
+      substed = 1
+    } else
+      len += 1 + keylen
+  }
+
+  print line
 }
 
+_ACAWK
+_ACEOF
+cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1
+if sed "s/$ac_cr//" < /dev/null > /dev/null 2>&1; then
+  sed "s/$ac_cr\$//; s/$ac_cr/$ac_cs_awk_cr/g"
+else
+  cat
+fi < "$tmp/subs1.awk" > "$tmp/subs.awk" \
+  || as_fn_error "could not setup config files machinery" "$LINENO" 5
 _ACEOF
 
-cat >>$CONFIG_STATUS <<_ACEOF
+# VPATH may cause trouble with some makes, so we remove $(srcdir),
+# ${srcdir} and @srcdir@ from VPATH if srcdir is ".", strip leading and
+# trailing colons and then remove the whole line if VPATH becomes empty
+# (actually we leave an empty line to preserve line numbers).
+if test "x$srcdir" = x.; then
+  ac_vpsub='/^[	 ]*VPATH[	 ]*=/{
+s/:*\$(srcdir):*/:/
+s/:*\${srcdir}:*/:/
+s/:*@srcdir@:*/:/
+s/^\([^=]*=[	 ]*\):*/\1/
+s/:*$//
+s/^[^=]*=[	 ]*$//
+}'
+fi
 
-#
-# CONFIG_FILES section.
-#
+cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1
+fi # test -n "$CONFIG_FILES"
 
-# No need to generate the scripts if there are no CONFIG_FILES.
-# This happens for instance when ./config.status config.h
-if test -n "\$CONFIG_FILES"; then
-  # Protect against being on the right side of a sed subst in config.status.
-  sed 's/,@/@@/; s/@,/@@/; s/,;t t\$/@;t t/; /@;t t\$/s/[\\\\&,]/\\\\&/g;
-   s/@@/,@/; s/@@/@,/; s/@;t t\$/,;t t/' >\$tmp/subs.sed <<\\CEOF
-s,@SHELL@,$SHELL,;t t
-s,@PATH_SEPARATOR@,$PATH_SEPARATOR,;t t
-s,@PACKAGE_NAME@,$PACKAGE_NAME,;t t
-s,@PACKAGE_TARNAME@,$PACKAGE_TARNAME,;t t
-s,@PACKAGE_VERSION@,$PACKAGE_VERSION,;t t
-s,@PACKAGE_STRING@,$PACKAGE_STRING,;t t
-s,@PACKAGE_BUGREPORT@,$PACKAGE_BUGREPORT,;t t
-s,@exec_prefix@,$exec_prefix,;t t
-s,@prefix@,$prefix,;t t
-s,@program_transform_name@,$program_transform_name,;t t
-s,@bindir@,$bindir,;t t
-s,@sbindir@,$sbindir,;t t
-s,@libexecdir@,$libexecdir,;t t
-s,@datadir@,$datadir,;t t
-s,@sysconfdir@,$sysconfdir,;t t
-s,@sharedstatedir@,$sharedstatedir,;t t
-s,@localstatedir@,$localstatedir,;t t
-s,@libdir@,$libdir,;t t
-s,@includedir@,$includedir,;t t
-s,@oldincludedir@,$oldincludedir,;t t
-s,@infodir@,$infodir,;t t
-s,@mandir@,$mandir,;t t
-s,@build_alias@,$build_alias,;t t
-s,@host_alias@,$host_alias,;t t
-s,@target_alias@,$target_alias,;t t
-s,@DEFS@,$DEFS,;t t
-s,@ECHO_C@,$ECHO_C,;t t
-s,@ECHO_N@,$ECHO_N,;t t
-s,@ECHO_T@,$ECHO_T,;t t
-s,@LIBS@,$LIBS,;t t
-s,@CC@,$CC,;t t
-s,@build@,$build,;t t
-s,@build_cpu@,$build_cpu,;t t
-s,@build_vendor@,$build_vendor,;t t
-s,@build_os@,$build_os,;t t
-s,@host@,$host,;t t
-s,@host_cpu@,$host_cpu,;t t
-s,@host_vendor@,$host_vendor,;t t
-s,@host_os@,$host_os,;t t
-s,@target@,$target,;t t
-s,@target_cpu@,$target_cpu,;t t
-s,@target_vendor@,$target_vendor,;t t
-s,@target_os@,$target_os,;t t
-s,@subdirs@,$subdirs,;t t
-s,@arch@,$arch,;t t
-s,@LIBOBJS@,$LIBOBJS,;t t
-s,@LTLIBOBJS@,$LTLIBOBJS,;t t
-CEOF
 
-_ACEOF
+eval set X "  :F $CONFIG_FILES      "
+shift
+for ac_tag
+do
+  case $ac_tag in
+  :[FHLC]) ac_mode=$ac_tag; continue;;
+  esac
+  case $ac_mode$ac_tag in
+  :[FHL]*:*);;
+  :L* | :C*:*) as_fn_error "invalid tag \`$ac_tag'" "$LINENO" 5;;
+  :[FH]-) ac_tag=-:-;;
+  :[FH]*) ac_tag=$ac_tag:$ac_tag.in;;
+  esac
+  ac_save_IFS=$IFS
+  IFS=:
+  set x $ac_tag
+  IFS=$ac_save_IFS
+  shift
+  ac_file=$1
+  shift
 
-  cat >>$CONFIG_STATUS <<\_ACEOF
-  # Split the substitutions into bite-sized pieces for seds with
-  # small command number limits, like on Digital OSF/1 and HP-UX.
-  ac_max_sed_lines=48
-  ac_sed_frag=1 # Number of current file.
-  ac_beg=1 # First line for current file.
-  ac_end=$ac_max_sed_lines # Line after last line for current file.
-  ac_more_lines=:
-  ac_sed_cmds=
-  while $ac_more_lines; do
-    if test $ac_beg -gt 1; then
-      sed "1,${ac_beg}d; ${ac_end}q" $tmp/subs.sed >$tmp/subs.frag
-    else
-      sed "${ac_end}q" $tmp/subs.sed >$tmp/subs.frag
-    fi
-    if test ! -s $tmp/subs.frag; then
-      ac_more_lines=false
-    else
-      # The purpose of the label and of the branching condition is to
-      # speed up the sed processing (if there are no `@' at all, there
-      # is no need to browse any of the substitutions).
-      # These are the two extra sed commands mentioned above.
-      (echo ':t
-  /@[a-zA-Z_][a-zA-Z_0-9]*@/!b' && cat $tmp/subs.frag) >$tmp/subs-$ac_sed_frag.sed
-      if test -z "$ac_sed_cmds"; then
-	ac_sed_cmds="sed -f $tmp/subs-$ac_sed_frag.sed"
-      else
-	ac_sed_cmds="$ac_sed_cmds | sed -f $tmp/subs-$ac_sed_frag.sed"
-      fi
-      ac_sed_frag=`expr $ac_sed_frag + 1`
-      ac_beg=$ac_end
-      ac_end=`expr $ac_end + $ac_max_sed_lines`
+  case $ac_mode in
+  :L) ac_source=$1;;
+  :[FH])
+    ac_file_inputs=
+    for ac_f
+    do
+      case $ac_f in
+      -) ac_f="$tmp/stdin";;
+      *) # Look for the file first in the build tree, then in the source tree
+	 # (if the path is not absolute).  The absolute path cannot be DOS-style,
+	 # because $ac_f cannot contain `:'.
+	 test -f "$ac_f" ||
+	   case $ac_f in
+	   [\\/$]*) false;;
+	   *) test -f "$srcdir/$ac_f" && ac_f="$srcdir/$ac_f";;
+	   esac ||
+	   as_fn_error "cannot find input file: \`$ac_f'" "$LINENO" 5;;
+      esac
+      case $ac_f in *\'*) ac_f=`$as_echo "$ac_f" | sed "s/'/'\\\\\\\\''/g"`;; esac
+      as_fn_append ac_file_inputs " '$ac_f'"
+    done
+
+    # Let's still pretend it is `configure' which instantiates (i.e., don't
+    # use $as_me), people would be surprised to read:
+    #    /* config.h.  Generated by config.status.  */
+    configure_input='Generated from '`
+	  $as_echo "$*" | sed 's|^[^:]*/||;s|:[^:]*/|, |g'
+	`' by configure.'
+    if test x"$ac_file" != x-; then
+      configure_input="$ac_file.  $configure_input"
+      { $as_echo "$as_me:${as_lineno-$LINENO}: creating $ac_file" >&5
+$as_echo "$as_me: creating $ac_file" >&6;}
     fi
-  done
-  if test -z "$ac_sed_cmds"; then
-    ac_sed_cmds=cat
-  fi
-fi # test -n "$CONFIG_FILES"
+    # Neutralize special characters interpreted by sed in replacement strings.
+    case $configure_input in #(
+    *\&* | *\|* | *\\* )
+       ac_sed_conf_input=`$as_echo "$configure_input" |
+       sed 's/[\\\\&|]/\\\\&/g'`;; #(
+    *) ac_sed_conf_input=$configure_input;;
+    esac
 
-_ACEOF
-cat >>$CONFIG_STATUS <<\_ACEOF
-for ac_file in : $CONFIG_FILES; do test "x$ac_file" = x: && continue
-  # Support "outfile[:infile[:infile...]]", defaulting infile="outfile.in".
-  case $ac_file in
-  - | *:- | *:-:* ) # input from stdin
-	cat >$tmp/stdin
-	ac_file_in=`echo "$ac_file" | sed 's,[^:]*:,,'`
-	ac_file=`echo "$ac_file" | sed 's,:.*,,'` ;;
-  *:* ) ac_file_in=`echo "$ac_file" | sed 's,[^:]*:,,'`
-	ac_file=`echo "$ac_file" | sed 's,:.*,,'` ;;
-  * )   ac_file_in=$ac_file.in ;;
+    case $ac_tag in
+    *:-:* | *:-) cat >"$tmp/stdin" \
+      || as_fn_error "could not create $ac_file" "$LINENO" 5 ;;
+    esac
+    ;;
   esac
 
-  # Compute @srcdir@, @top_srcdir@, and @INSTALL@ for subdirectories.
-  ac_dir=`(dirname "$ac_file") 2>/dev/null ||
+  ac_dir=`$as_dirname -- "$ac_file" ||
 $as_expr X"$ac_file" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
 	 X"$ac_file" : 'X\(//\)[^/]' \| \
 	 X"$ac_file" : 'X\(//\)$' \| \
-	 X"$ac_file" : 'X\(/\)' \| \
-	 .     : '\(.\)' 2>/dev/null ||
-echo X"$ac_file" |
-    sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/; q; }
-  	  /^X\(\/\/\)[^/].*/{ s//\1/; q; }
-  	  /^X\(\/\/\)$/{ s//\1/; q; }
-  	  /^X\(\/\).*/{ s//\1/; q; }
-  	  s/.*/./; q'`
-  { if $as_mkdir_p; then
-    mkdir -p "$ac_dir"
-  else
-    as_dir="$ac_dir"
-    as_dirs=
-    while test ! -d "$as_dir"; do
-      as_dirs="$as_dir $as_dirs"
-      as_dir=`(dirname "$as_dir") 2>/dev/null ||
-$as_expr X"$as_dir" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
-	 X"$as_dir" : 'X\(//\)[^/]' \| \
-	 X"$as_dir" : 'X\(//\)$' \| \
-	 X"$as_dir" : 'X\(/\)' \| \
-	 .     : '\(.\)' 2>/dev/null ||
-echo X"$as_dir" |
-    sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/; q; }
-  	  /^X\(\/\/\)[^/].*/{ s//\1/; q; }
-  	  /^X\(\/\/\)$/{ s//\1/; q; }
-  	  /^X\(\/\).*/{ s//\1/; q; }
-  	  s/.*/./; q'`
-    done
-    test ! -n "$as_dirs" || mkdir $as_dirs
-  fi || { { echo "$as_me:$LINENO: error: cannot create directory \"$ac_dir\"" >&5
-echo "$as_me: error: cannot create directory \"$ac_dir\"" >&2;}
-   { (exit 1); exit 1; }; }; }
-
+	 X"$ac_file" : 'X\(/\)' \| . 2>/dev/null ||
+$as_echo X"$ac_file" |
+    sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{
+	    s//\1/
+	    q
+	  }
+	  /^X\(\/\/\)[^/].*/{
+	    s//\1/
+	    q
+	  }
+	  /^X\(\/\/\)$/{
+	    s//\1/
+	    q
+	  }
+	  /^X\(\/\).*/{
+	    s//\1/
+	    q
+	  }
+	  s/.*/./; q'`
+  as_dir="$ac_dir"; as_fn_mkdir_p
   ac_builddir=.
 
-if test "$ac_dir" != .; then
-  ac_dir_suffix=/`echo "$ac_dir" | sed 's,^\.[\\/],,'`
-  # A "../" for each directory in $ac_dir_suffix.
-  ac_top_builddir=`echo "$ac_dir_suffix" | sed 's,/[^\\/]*,../,g'`
-else
-  ac_dir_suffix= ac_top_builddir=
-fi
+case "$ac_dir" in
+.) ac_dir_suffix= ac_top_builddir_sub=. ac_top_build_prefix= ;;
+*)
+  ac_dir_suffix=/`$as_echo "$ac_dir" | sed 's|^\.[\\/]||'`
+  # A ".." for each directory in $ac_dir_suffix.
+  ac_top_builddir_sub=`$as_echo "$ac_dir_suffix" | sed 's|/[^\\/]*|/..|g;s|/||'`
+  case $ac_top_builddir_sub in
+  "") ac_top_builddir_sub=. ac_top_build_prefix= ;;
+  *)  ac_top_build_prefix=$ac_top_builddir_sub/ ;;
+  esac ;;
+esac
+ac_abs_top_builddir=$ac_pwd
+ac_abs_builddir=$ac_pwd$ac_dir_suffix
+# for backward compatibility:
+ac_top_builddir=$ac_top_build_prefix
 
 case $srcdir in
-  .)  # No --srcdir option.  We are building in place.
+  .)  # We are building in place.
     ac_srcdir=.
-    if test -z "$ac_top_builddir"; then
-       ac_top_srcdir=.
-    else
-       ac_top_srcdir=`echo $ac_top_builddir | sed 's,/$,,'`
-    fi ;;
-  [\\/]* | ?:[\\/]* )  # Absolute path.
+    ac_top_srcdir=$ac_top_builddir_sub
+    ac_abs_top_srcdir=$ac_pwd ;;
+  [\\/]* | ?:[\\/]* )  # Absolute name.
     ac_srcdir=$srcdir$ac_dir_suffix;
-    ac_top_srcdir=$srcdir ;;
-  *) # Relative path.
-    ac_srcdir=$ac_top_builddir$srcdir$ac_dir_suffix
-    ac_top_srcdir=$ac_top_builddir$srcdir ;;
+    ac_top_srcdir=$srcdir
+    ac_abs_top_srcdir=$srcdir ;;
+  *) # Relative name.
+    ac_srcdir=$ac_top_build_prefix$srcdir$ac_dir_suffix
+    ac_top_srcdir=$ac_top_build_prefix$srcdir
+    ac_abs_top_srcdir=$ac_pwd/$srcdir ;;
 esac
+ac_abs_srcdir=$ac_abs_top_srcdir$ac_dir_suffix
 
-# Do not use `cd foo && pwd` to compute absolute paths, because
-# the directories may not exist.
-case `pwd` in
-.) ac_abs_builddir="$ac_dir";;
-*)
-  case "$ac_dir" in
-  .) ac_abs_builddir=`pwd`;;
-  [\\/]* | ?:[\\/]* ) ac_abs_builddir="$ac_dir";;
-  *) ac_abs_builddir=`pwd`/"$ac_dir";;
-  esac;;
-esac
-case $ac_abs_builddir in
-.) ac_abs_top_builddir=${ac_top_builddir}.;;
-*)
-  case ${ac_top_builddir}. in
-  .) ac_abs_top_builddir=$ac_abs_builddir;;
-  [\\/]* | ?:[\\/]* ) ac_abs_top_builddir=${ac_top_builddir}.;;
-  *) ac_abs_top_builddir=$ac_abs_builddir/${ac_top_builddir}.;;
-  esac;;
-esac
-case $ac_abs_builddir in
-.) ac_abs_srcdir=$ac_srcdir;;
-*)
-  case $ac_srcdir in
-  .) ac_abs_srcdir=$ac_abs_builddir;;
-  [\\/]* | ?:[\\/]* ) ac_abs_srcdir=$ac_srcdir;;
-  *) ac_abs_srcdir=$ac_abs_builddir/$ac_srcdir;;
-  esac;;
-esac
-case $ac_abs_builddir in
-.) ac_abs_top_srcdir=$ac_top_srcdir;;
-*)
-  case $ac_top_srcdir in
-  .) ac_abs_top_srcdir=$ac_abs_builddir;;
-  [\\/]* | ?:[\\/]* ) ac_abs_top_srcdir=$ac_top_srcdir;;
-  *) ac_abs_top_srcdir=$ac_abs_builddir/$ac_top_srcdir;;
-  esac;;
-esac
 
+  case $ac_mode in
+  :F)
+  #
+  # CONFIG_FILE
+  #
 
+_ACEOF
 
-  if test x"$ac_file" != x-; then
-    { echo "$as_me:$LINENO: creating $ac_file" >&5
-echo "$as_me: creating $ac_file" >&6;}
-    rm -f "$ac_file"
-  fi
-  # Let's still pretend it is `configure' which instantiates (i.e., don't
-  # use $as_me), people would be surprised to read:
-  #    /* config.h.  Generated by config.status.  */
-  if test x"$ac_file" = x-; then
-    configure_input=
-  else
-    configure_input="$ac_file.  "
-  fi
-  configure_input=$configure_input"Generated from `echo $ac_file_in |
-				     sed 's,.*/,,'` by configure."
-
-  # First look for the input files in the build tree, otherwise in the
-  # src tree.
-  ac_file_inputs=`IFS=:
-    for f in $ac_file_in; do
-      case $f in
-      -) echo $tmp/stdin ;;
-      [\\/$]*)
-	 # Absolute (can't be DOS-style, as IFS=:)
-	 test -f "$f" || { { echo "$as_me:$LINENO: error: cannot find input file: $f" >&5
-echo "$as_me: error: cannot find input file: $f" >&2;}
-   { (exit 1); exit 1; }; }
-	 echo "$f";;
-      *) # Relative
-	 if test -f "$f"; then
-	   # Build tree
-	   echo "$f"
-	 elif test -f "$srcdir/$f"; then
-	   # Source tree
-	   echo "$srcdir/$f"
-	 else
-	   # /dev/null tree
-	   { { echo "$as_me:$LINENO: error: cannot find input file: $f" >&5
-echo "$as_me: error: cannot find input file: $f" >&2;}
-   { (exit 1); exit 1; }; }
-	 fi;;
-      esac
-    done` || { (exit 1); exit 1; }
+cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1
+# If the template does not know about datarootdir, expand it.
+# FIXME: This hack should be removed a few years after 2.60.
+ac_datarootdir_hack=; ac_datarootdir_seen=
+ac_sed_dataroot='
+/datarootdir/ {
+  p
+  q
+}
+/@datadir@/p
+/@docdir@/p
+/@infodir@/p
+/@localedir@/p
+/@mandir@/p'
+case `eval "sed -n \"\$ac_sed_dataroot\" $ac_file_inputs"` in
+*datarootdir*) ac_datarootdir_seen=yes;;
+*@datadir@*|*@docdir@*|*@infodir@*|*@localedir@*|*@mandir@*)
+  { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $ac_file_inputs seems to ignore the --datarootdir setting" >&5
+$as_echo "$as_me: WARNING: $ac_file_inputs seems to ignore the --datarootdir setting" >&2;}
+_ACEOF
+cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1
+  ac_datarootdir_hack='
+  s&@datadir@&$datadir&g
+  s&@docdir@&$docdir&g
+  s&@infodir@&$infodir&g
+  s&@localedir@&$localedir&g
+  s&@mandir@&$mandir&g
+  s&\\\${datarootdir}&$datarootdir&g' ;;
+esac
 _ACEOF
-cat >>$CONFIG_STATUS <<_ACEOF
-  sed "$ac_vpsub
+
+# Neutralize VPATH when `$srcdir' = `.'.
+# Shell code in configure.ac might set extrasub.
+# FIXME: do we really want to maintain this feature?
+cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1
+ac_sed_extra="$ac_vpsub
 $extrasub
 _ACEOF
-cat >>$CONFIG_STATUS <<\_ACEOF
+cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1
 :t
 /@[a-zA-Z_][a-zA-Z_0-9]*@/!b
-s,@configure_input@,$configure_input,;t t
-s,@srcdir@,$ac_srcdir,;t t
-s,@abs_srcdir@,$ac_abs_srcdir,;t t
-s,@top_srcdir@,$ac_top_srcdir,;t t
-s,@abs_top_srcdir@,$ac_abs_top_srcdir,;t t
-s,@builddir@,$ac_builddir,;t t
-s,@abs_builddir@,$ac_abs_builddir,;t t
-s,@top_builddir@,$ac_top_builddir,;t t
-s,@abs_top_builddir@,$ac_abs_top_builddir,;t t
-" $ac_file_inputs | (eval "$ac_sed_cmds") >$tmp/out
-  rm -f $tmp/stdin
-  if test x"$ac_file" != x-; then
-    mv $tmp/out $ac_file
-  else
-    cat $tmp/out
-    rm -f $tmp/out
-  fi
+s|@configure_input@|$ac_sed_conf_input|;t t
+s&@top_builddir@&$ac_top_builddir_sub&;t t
+s&@top_build_prefix@&$ac_top_build_prefix&;t t
+s&@srcdir@&$ac_srcdir&;t t
+s&@abs_srcdir@&$ac_abs_srcdir&;t t
+s&@top_srcdir@&$ac_top_srcdir&;t t
+s&@abs_top_srcdir@&$ac_abs_top_srcdir&;t t
+s&@builddir@&$ac_builddir&;t t
+s&@abs_builddir@&$ac_abs_builddir&;t t
+s&@abs_top_builddir@&$ac_abs_top_builddir&;t t
+$ac_datarootdir_hack
+"
+eval sed \"\$ac_sed_extra\" "$ac_file_inputs" | $AWK -f "$tmp/subs.awk" >$tmp/out \
+  || as_fn_error "could not create $ac_file" "$LINENO" 5
+
+test -z "$ac_datarootdir_hack$ac_datarootdir_seen" &&
+  { ac_out=`sed -n '/\${datarootdir}/p' "$tmp/out"`; test -n "$ac_out"; } &&
+  { ac_out=`sed -n '/^[	 ]*datarootdir[	 ]*:*=/p' "$tmp/out"`; test -z "$ac_out"; } &&
+  { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $ac_file contains a reference to the variable \`datarootdir'
+which seems to be undefined.  Please make sure it is defined." >&5
+$as_echo "$as_me: WARNING: $ac_file contains a reference to the variable \`datarootdir'
+which seems to be undefined.  Please make sure it is defined." >&2;}
+
+  rm -f "$tmp/stdin"
+  case $ac_file in
+  -) cat "$tmp/out" && rm -f "$tmp/out";;
+  *) rm -f "$ac_file" && mv "$tmp/out" "$ac_file";;
+  esac \
+  || as_fn_error "could not create $ac_file" "$LINENO" 5
+ ;;
 
-done
-_ACEOF
 
-cat >>$CONFIG_STATUS <<\_ACEOF
 
-{ (exit 0); exit 0; }
+  esac
+
+done # for ac_tag
+
+
+as_fn_exit 0
 _ACEOF
-chmod +x $CONFIG_STATUS
 ac_clean_files=$ac_clean_files_save
 
+test $ac_write_fail = 0 ||
+  as_fn_error "write failure creating $CONFIG_STATUS" "$LINENO" 5
+
 
 # configure is writing to config.log, and then calls config.status.
 # config.status does its own redirection, appending to config.log.
@@ -2276,7 +2944,7 @@ if test "$no_create" != yes; then
   exec 5>>config.log
   # Use ||, not &&, to avoid exiting from the if with $? = 1, which
   # would make configure fail if this is the last instruction.
-  $ac_cs_success || { (exit 1); exit 1; }
+  $ac_cs_success || as_fn_exit $?
 fi
 
 #
@@ -2284,10 +2952,14 @@ fi
 #
 if test "$no_recursion" != yes; then
 
-  # Remove --cache-file and --srcdir arguments so they do not pile up.
+  # Remove --cache-file, --srcdir, and --disable-option-checking arguments
+  # so they do not pile up.
   ac_sub_configure_args=
   ac_prev=
-  for ac_arg in $ac_configure_args; do
+  eval "set x $ac_configure_args"
+  shift
+  for ac_arg
+  do
     if test -n "$ac_prev"; then
       ac_prev=
       continue
@@ -2310,126 +2982,92 @@ if test "$no_recursion" != yes; then
       ac_prev=prefix ;;
     -prefix=* | --prefix=* | --prefi=* | --pref=* | --pre=* | --pr=* | --p=*)
       ;;
-    *) ac_sub_configure_args="$ac_sub_configure_args $ac_arg" ;;
+    --disable-option-checking)
+      ;;
+    *)
+      case $ac_arg in
+      *\'*) ac_arg=`$as_echo "$ac_arg" | sed "s/'/'\\\\\\\\''/g"` ;;
+      esac
+      as_fn_append ac_sub_configure_args " '$ac_arg'" ;;
     esac
   done
 
   # Always prepend --prefix to ensure using the same prefix
   # in subdir configurations.
-  ac_sub_configure_args="--prefix=$prefix $ac_sub_configure_args"
+  ac_arg="--prefix=$prefix"
+  case $ac_arg in
+  *\'*) ac_arg=`$as_echo "$ac_arg" | sed "s/'/'\\\\\\\\''/g"` ;;
+  esac
+  ac_sub_configure_args="'$ac_arg' $ac_sub_configure_args"
+
+  # Pass --silent
+  if test "$silent" = yes; then
+    ac_sub_configure_args="--silent $ac_sub_configure_args"
+  fi
+
+  # Always prepend --disable-option-checking to silence warnings, since
+  # different subdirs can have different --enable and --with options.
+  ac_sub_configure_args="--disable-option-checking $ac_sub_configure_args"
 
   ac_popdir=`pwd`
   for ac_dir in : $subdirs; do test "x$ac_dir" = x: && continue
 
     # Do not complain, so a configure script can configure whichever
     # parts of a large source tree are present.
-    test -d $srcdir/$ac_dir || continue
-
-    { echo "$as_me:$LINENO: configuring in $ac_dir" >&5
-echo "$as_me: configuring in $ac_dir" >&6;}
-    { if $as_mkdir_p; then
-    mkdir -p "$ac_dir"
-  else
-    as_dir="$ac_dir"
-    as_dirs=
-    while test ! -d "$as_dir"; do
-      as_dirs="$as_dir $as_dirs"
-      as_dir=`(dirname "$as_dir") 2>/dev/null ||
-$as_expr X"$as_dir" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
-	 X"$as_dir" : 'X\(//\)[^/]' \| \
-	 X"$as_dir" : 'X\(//\)$' \| \
-	 X"$as_dir" : 'X\(/\)' \| \
-	 .     : '\(.\)' 2>/dev/null ||
-echo X"$as_dir" |
-    sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/; q; }
-  	  /^X\(\/\/\)[^/].*/{ s//\1/; q; }
-  	  /^X\(\/\/\)$/{ s//\1/; q; }
-  	  /^X\(\/\).*/{ s//\1/; q; }
-  	  s/.*/./; q'`
-    done
-    test ! -n "$as_dirs" || mkdir $as_dirs
-  fi || { { echo "$as_me:$LINENO: error: cannot create directory \"$ac_dir\"" >&5
-echo "$as_me: error: cannot create directory \"$ac_dir\"" >&2;}
-   { (exit 1); exit 1; }; }; }
+    test -d "$srcdir/$ac_dir" || continue
 
+    ac_msg="=== configuring in $ac_dir (`pwd`/$ac_dir)"
+    $as_echo "$as_me:${as_lineno-$LINENO}: $ac_msg" >&5
+    $as_echo "$ac_msg" >&6
+    as_dir="$ac_dir"; as_fn_mkdir_p
     ac_builddir=.
 
-if test "$ac_dir" != .; then
-  ac_dir_suffix=/`echo "$ac_dir" | sed 's,^\.[\\/],,'`
-  # A "../" for each directory in $ac_dir_suffix.
-  ac_top_builddir=`echo "$ac_dir_suffix" | sed 's,/[^\\/]*,../,g'`
-else
-  ac_dir_suffix= ac_top_builddir=
-fi
+case "$ac_dir" in
+.) ac_dir_suffix= ac_top_builddir_sub=. ac_top_build_prefix= ;;
+*)
+  ac_dir_suffix=/`$as_echo "$ac_dir" | sed 's|^\.[\\/]||'`
+  # A ".." for each directory in $ac_dir_suffix.
+  ac_top_builddir_sub=`$as_echo "$ac_dir_suffix" | sed 's|/[^\\/]*|/..|g;s|/||'`
+  case $ac_top_builddir_sub in
+  "") ac_top_builddir_sub=. ac_top_build_prefix= ;;
+  *)  ac_top_build_prefix=$ac_top_builddir_sub/ ;;
+  esac ;;
+esac
+ac_abs_top_builddir=$ac_pwd
+ac_abs_builddir=$ac_pwd$ac_dir_suffix
+# for backward compatibility:
+ac_top_builddir=$ac_top_build_prefix
 
 case $srcdir in
-  .)  # No --srcdir option.  We are building in place.
+  .)  # We are building in place.
     ac_srcdir=.
-    if test -z "$ac_top_builddir"; then
-       ac_top_srcdir=.
-    else
-       ac_top_srcdir=`echo $ac_top_builddir | sed 's,/$,,'`
-    fi ;;
-  [\\/]* | ?:[\\/]* )  # Absolute path.
+    ac_top_srcdir=$ac_top_builddir_sub
+    ac_abs_top_srcdir=$ac_pwd ;;
+  [\\/]* | ?:[\\/]* )  # Absolute name.
     ac_srcdir=$srcdir$ac_dir_suffix;
-    ac_top_srcdir=$srcdir ;;
-  *) # Relative path.
-    ac_srcdir=$ac_top_builddir$srcdir$ac_dir_suffix
-    ac_top_srcdir=$ac_top_builddir$srcdir ;;
-esac
-
-# Do not use `cd foo && pwd` to compute absolute paths, because
-# the directories may not exist.
-case `pwd` in
-.) ac_abs_builddir="$ac_dir";;
-*)
-  case "$ac_dir" in
-  .) ac_abs_builddir=`pwd`;;
-  [\\/]* | ?:[\\/]* ) ac_abs_builddir="$ac_dir";;
-  *) ac_abs_builddir=`pwd`/"$ac_dir";;
-  esac;;
-esac
-case $ac_abs_builddir in
-.) ac_abs_top_builddir=${ac_top_builddir}.;;
-*)
-  case ${ac_top_builddir}. in
-  .) ac_abs_top_builddir=$ac_abs_builddir;;
-  [\\/]* | ?:[\\/]* ) ac_abs_top_builddir=${ac_top_builddir}.;;
-  *) ac_abs_top_builddir=$ac_abs_builddir/${ac_top_builddir}.;;
-  esac;;
-esac
-case $ac_abs_builddir in
-.) ac_abs_srcdir=$ac_srcdir;;
-*)
-  case $ac_srcdir in
-  .) ac_abs_srcdir=$ac_abs_builddir;;
-  [\\/]* | ?:[\\/]* ) ac_abs_srcdir=$ac_srcdir;;
-  *) ac_abs_srcdir=$ac_abs_builddir/$ac_srcdir;;
-  esac;;
-esac
-case $ac_abs_builddir in
-.) ac_abs_top_srcdir=$ac_top_srcdir;;
-*)
-  case $ac_top_srcdir in
-  .) ac_abs_top_srcdir=$ac_abs_builddir;;
-  [\\/]* | ?:[\\/]* ) ac_abs_top_srcdir=$ac_top_srcdir;;
-  *) ac_abs_top_srcdir=$ac_abs_builddir/$ac_top_srcdir;;
-  esac;;
+    ac_top_srcdir=$srcdir
+    ac_abs_top_srcdir=$srcdir ;;
+  *) # Relative name.
+    ac_srcdir=$ac_top_build_prefix$srcdir$ac_dir_suffix
+    ac_top_srcdir=$ac_top_build_prefix$srcdir
+    ac_abs_top_srcdir=$ac_pwd/$srcdir ;;
 esac
+ac_abs_srcdir=$ac_abs_top_srcdir$ac_dir_suffix
 
 
-    cd $ac_dir
+    cd "$ac_dir"
 
     # Check for guested configure; otherwise get Cygnus style configure.
-    if test -f $ac_srcdir/configure.gnu; then
-      ac_sub_configure="$SHELL '$ac_srcdir/configure.gnu'"
-    elif test -f $ac_srcdir/configure; then
-      ac_sub_configure="$SHELL '$ac_srcdir/configure'"
-    elif test -f $ac_srcdir/configure.in; then
-      ac_sub_configure=$ac_configure
+    if test -f "$ac_srcdir/configure.gnu"; then
+      ac_sub_configure=$ac_srcdir/configure.gnu
+    elif test -f "$ac_srcdir/configure"; then
+      ac_sub_configure=$ac_srcdir/configure
+    elif test -f "$ac_srcdir/configure.in"; then
+      # This should be Cygnus configure.
+      ac_sub_configure=$ac_aux_dir/configure
     else
-      { echo "$as_me:$LINENO: WARNING: no configuration information is in $ac_dir" >&5
-echo "$as_me: WARNING: no configuration information is in $ac_dir" >&2;}
+      { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: no configuration information is in $ac_dir" >&5
+$as_echo "$as_me: WARNING: no configuration information is in $ac_dir" >&2;}
       ac_sub_configure=
     fi
 
@@ -2438,21 +3076,23 @@ echo "$as_me: WARNING: no configuration information is in $ac_dir" >&2;}
       # Make the cache file name correct relative to the subdirectory.
       case $cache_file in
       [\\/]* | ?:[\\/]* ) ac_sub_cache_file=$cache_file ;;
-      *) # Relative path.
-	ac_sub_cache_file=$ac_top_builddir$cache_file ;;
+      *) # Relative name.
+	ac_sub_cache_file=$ac_top_build_prefix$cache_file ;;
       esac
 
-      { echo "$as_me:$LINENO: running $ac_sub_configure $ac_sub_configure_args --cache-file=$ac_sub_cache_file --srcdir=$ac_srcdir" >&5
-echo "$as_me: running $ac_sub_configure $ac_sub_configure_args --cache-file=$ac_sub_cache_file --srcdir=$ac_srcdir" >&6;}
+      { $as_echo "$as_me:${as_lineno-$LINENO}: running $SHELL $ac_sub_configure $ac_sub_configure_args --cache-file=$ac_sub_cache_file --srcdir=$ac_srcdir" >&5
+$as_echo "$as_me: running $SHELL $ac_sub_configure $ac_sub_configure_args --cache-file=$ac_sub_cache_file --srcdir=$ac_srcdir" >&6;}
       # The eval makes quoting arguments work.
-      eval $ac_sub_configure $ac_sub_configure_args \
-	   --cache-file=$ac_sub_cache_file --srcdir=$ac_srcdir ||
-	{ { echo "$as_me:$LINENO: error: $ac_sub_configure failed for $ac_dir" >&5
-echo "$as_me: error: $ac_sub_configure failed for $ac_dir" >&2;}
-   { (exit 1); exit 1; }; }
+      eval "\$SHELL \"\$ac_sub_configure\" $ac_sub_configure_args \
+	   --cache-file=\"\$ac_sub_cache_file\" --srcdir=\"\$ac_srcdir\"" ||
+	as_fn_error "$ac_sub_configure failed for $ac_dir" "$LINENO" 5
     fi
 
-    cd $ac_popdir
+    cd "$ac_popdir"
   done
 fi
+if test -n "$ac_unrecognized_opts" && test "$enable_option_checking" != no; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: unrecognized options: $ac_unrecognized_opts" >&5
+$as_echo "$as_me: WARNING: unrecognized options: $ac_unrecognized_opts" >&2;}
+fi