Regenerate tree using Autoconf 2.64 and Automake 1.11.

config/:
	* override.m4 (_GCC_AUTOCONF_VERSION): Bump to 2.64.

/:
	* configure: Regenerate.

etc/:
	* configure: Regenerate.

sim/common/:
	* config.in: Regenerate.
	* configure: Likewise.

sim/iq2000/:
	* config.in: Regenerate.
	* configure: Likewise.

sim/d10v/:
	* config.in: Regenerate.
	* configure: Likewise.

sim/igen/:
	* config.in: Regenerate.
	* configure: Likewise.

sim/m32r/:
	* config.in: Regenerate.
	* configure: Likewise.

sim/frv/:
	* config.in: Regenerate.
	* configure: Likewise.

sim/:
	* avr/config.in: Regenerate.
	* avr/configure: Likewise.
	* configure: Likewise.
	* cris/config.in: Likewise.
	* cris/configure: Likewise.

sim/h8300/:
	* config.in: Regenerate.
	* configure: Likewise.

sim/mn10300/:
	* config.in: Regenerate.
	* configure: Likewise.

sim/ppc/:
	* config.in: Regenerate.
	* configure: Likewise.

sim/erc32/:
	* config.in: Regenerate.
	* configure: Likewise.

sim/arm/:
	* config.in: Regenerate.
	* configure: Likewise.

sim/m68hc11/:
	* config.in: Regenerate.
	* configure: Likewise.

sim/lm32/:
	* config.in: Regenerate.
	* configure: Likewise.

sim/sh64/:
	* config.in: Regenerate.
	* configure: Likewise.

sim/v850/:
	* config.in: Regenerate.
	* configure: Likewise.

sim/cr16/:
	* config.in: Regenerate.
	* configure: Likewise.

sim/moxie/:
	* config.in: Regenerate.
	* configure: Likewise.

sim/m32c/:
	* config.in: Regenerate.
	* configure: Likewise.

sim/mips/:
	* config.in: Regenerate.
	* configure: Likewise.

sim/mcore/:
	* config.in: Regenerate.
	* configure: Likewise.

sim/testsuite/d10v-elf/:
	* configure: Regenerate.

sim/testsuite/:
	* configure: Regenerate.

sim/testsuite/frv-elf/:
	* configure: Regenerate.

sim/testsuite/m32r-elf/:
	* configure: Regenerate.

sim/testsuite/mips64el-elf/:
	* configure: Regenerate.

sim/sh/:
	* config.in: Regenerate.
	* configure: Likewise.

gold/:
	* Makefile.in: Regenerate.
	* aclocal.m4: Likewise.
	* config.in: Likewise.
	* configure: Likewise.
	* testsuite/Makefile.in: Likewise.

gprof/:
	* Makefile.in: Regenerate.
	* aclocal.m4: Likewise.
	* configure: Likewise.
	* gconfig.in: Likewise.

opcodes/:
	* Makefile.in: Regenerate.
	* aclocal.m4: Likewise.
	* config.in: Likewise.
	* configure: Likewise.

gas/:
	* Makefile.in: Regenerate.
	* aclocal.m4: Likewise.
	* config.in: Likewise.
	* configure: Likewise.
	* doc/Makefile.in: Likewise.

ld/:
	* Makefile.in: Regenerate.
	* aclocal.m4: Likewise.
	* config.in: Likewise.
	* configure: Likewise.

gdb/:
	* aclocal.m4: Regenerate.
	* config.in: Likewise.
	* configure: Likewise.
	* gnulib/Makefile.in: Likewise.

gdb/doc/:
	* configure: Regenerate.

gdb/gdbserver/:
	* aclocal.m4: Regenerate.
	* config.in: Likewise.
	* configure: Likewise.

gdb/testsuite/:
	* configure: Regenerate.
	* gdb.hp/configure: Likewise.
	* gdb.hp/gdb.aCC/configure: Likewise.
	* gdb.hp/gdb.base-hp/configure: Likewise.
	* gdb.hp/gdb.compat/configure: Likewise.
	* gdb.hp/gdb.defects/configure: Likewise.
	* gdb.hp/gdb.objdbg/configure: Likewise.
	* gdb.stabs/configure: Likewise.

binutils/:
	* Makefile.in: Regenerate.
	* aclocal.m4: Likewise.
	* config.in: Likewise.
	* configure: Likewise.
	* doc/Makefile.in: Likewise.

bfd/:
	* Makefile.in: Regenerate.
	* aclocal.m4: Likewise.
	* config.in: Likewise.
	* configure: Likewise.

bfd/doc/:
	* Makefile.in: Regenerate.

readline/:
	* configure: Regenerate.

readline/examples/rlfe/:
	* configure: Regenerate.

1 files changed, 4226 insertions, 5269 deletions

diff --git a/sim/ppc/configure b/sim/ppc/configure
index 32b200a..5b3325a 100755
--- a/sim/ppc/configure
+++ b/sim/ppc/configure
@@ -1,81 +1,413 @@
 #! /bin/sh
 # Guess values for system-dependent variables and create Makefiles.
-# Generated by GNU Autoconf 2.59.
+# Generated by GNU Autoconf 2.64.
+#
+# Copyright (C) 1992, 1993, 1994, 1995, 1996, 1998, 1999, 2000, 2001,
+# 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009 Free Software
+# Foundation, Inc.
 #
-# Copyright (C) 2003 Free Software Foundation, Inc.
 # This configure script is free software; the Free Software Foundation
 # gives unlimited permission to copy, distribute and modify it.
-## --------------------- ##
-## M4sh Initialization.  ##
-## --------------------- ##
+## -------------------- ##
+## M4sh Initialization. ##
+## -------------------- ##
 
-# Be Bourne compatible
-if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then
+# Be more Bourne compatible
+DUALCASE=1; export DUALCASE # for MKS sh
+if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then :
   emulate sh
   NULLCMD=:
-  # Zsh 3.x and 4.x performs word splitting on ${1+"$@"}, which
+  # Pre-4.2 versions of Zsh do word splitting on ${1+"$@"}, which
   # is contrary to our usage.  Disable this feature.
   alias -g '${1+"$@"}'='"$@"'
-elif test -n "${BASH_VERSION+set}" && (set -o posix) >/dev/null 2>&1; then
-  set -o posix
+  setopt NO_GLOB_SUBST
+else
+  case `(set -o) 2>/dev/null` in #(
+  *posix*) :
+    set -o posix ;; #(
+  *) :
+     ;;
+esac
 fi
-DUALCASE=1; export DUALCASE # for MKS sh
 
-# Support unset when possible.
-if ( (MAIL=60; unset MAIL) || exit) >/dev/null 2>&1; then
-  as_unset=unset
-else
-  as_unset=false
+
+as_nl='
+'
+export as_nl
+# Printing a long string crashes Solaris 7 /usr/bin/printf.
+as_echo='\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\'
+as_echo=$as_echo$as_echo$as_echo$as_echo$as_echo
+as_echo=$as_echo$as_echo$as_echo$as_echo$as_echo$as_echo
+# Prefer a ksh shell builtin over an external printf program on Solaris,
+# but without wasting forks for bash or zsh.
+if test -z "$BASH_VERSION$ZSH_VERSION" \
+    && (test "X`print -r -- $as_echo`" = "X$as_echo") 2>/dev/null; then
+  as_echo='print -r --'
+  as_echo_n='print -rn --'
+elif (test "X`printf %s $as_echo`" = "X$as_echo") 2>/dev/null; then
+  as_echo='printf %s\n'
+  as_echo_n='printf %s'
+else
+  if test "X`(/usr/ucb/echo -n -n $as_echo) 2>/dev/null`" = "X-n $as_echo"; then
+    as_echo_body='eval /usr/ucb/echo -n "$1$as_nl"'
+    as_echo_n='/usr/ucb/echo -n'
+  else
+    as_echo_body='eval expr "X$1" : "X\\(.*\\)"'
+    as_echo_n_body='eval
+      arg=$1;
+      case $arg in #(
+      *"$as_nl"*)
+	expr "X$arg" : "X\\(.*\\)$as_nl";
+	arg=`expr "X$arg" : ".*$as_nl\\(.*\\)"`;;
+      esac;
+      expr "X$arg" : "X\\(.*\\)" | tr -d "$as_nl"
+    '
+    export as_echo_n_body
+    as_echo_n='sh -c $as_echo_n_body as_echo'
+  fi
+  export as_echo_body
+  as_echo='sh -c $as_echo_body as_echo'
+fi
+
+# The user is always right.
+if test "${PATH_SEPARATOR+set}" != set; then
+  PATH_SEPARATOR=:
+  (PATH='/bin;/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 && {
+    (PATH='/bin:/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 ||
+      PATH_SEPARATOR=';'
+  }
 fi
 
 
-# Work around bugs in pre-3.0 UWIN ksh.
-$as_unset ENV MAIL MAILPATH
+# IFS
+# We need space, tab and new line, in precisely that order.  Quoting is
+# there to prevent editors from complaining about space-tab.
+# (If _AS_PATH_WALK were called with IFS unset, it would disable word
+# splitting by setting IFS to empty value.)
+IFS=" ""	$as_nl"
+
+# Find who we are.  Look in the path if we contain no directory separator.
+case $0 in #((
+  *[\\/]* ) as_myself=$0 ;;
+  *) as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    test -r "$as_dir/$0" && as_myself=$as_dir/$0 && break
+  done
+IFS=$as_save_IFS
+
+     ;;
+esac
+# We did not find ourselves, most probably we were run as `sh COMMAND'
+# in which case we are not to be found in the path.
+if test "x$as_myself" = x; then
+  as_myself=$0
+fi
+if test ! -f "$as_myself"; then
+  $as_echo "$as_myself: error: cannot find myself; rerun with an absolute file name" >&2
+  exit 1
+fi
+
+# Unset variables that we do not need and which cause bugs (e.g. in
+# pre-3.0 UWIN ksh).  But do not cause bugs in bash 2.01; the "|| exit 1"
+# suppresses any "Segmentation fault" message there.  '((' could
+# trigger a bug in pdksh 5.2.14.
+for as_var in BASH_ENV ENV MAIL MAILPATH
+do eval test x\${$as_var+set} = xset \
+  && ( (unset $as_var) || exit 1) >/dev/null 2>&1 && unset $as_var || :
+done
 PS1='$ '
 PS2='> '
 PS4='+ '
 
 # NLS nuisances.
-for as_var in \
-  LANG LANGUAGE LC_ADDRESS LC_ALL LC_COLLATE LC_CTYPE LC_IDENTIFICATION \
-  LC_MEASUREMENT LC_MESSAGES LC_MONETARY LC_NAME LC_NUMERIC LC_PAPER \
-  LC_TELEPHONE LC_TIME
+LC_ALL=C
+export LC_ALL
+LANGUAGE=C
+export LANGUAGE
+
+# CDPATH.
+(unset CDPATH) >/dev/null 2>&1 && unset CDPATH
+
+if test "x$CONFIG_SHELL" = x; then
+  as_bourne_compatible="if test -n \"\${ZSH_VERSION+set}\" && (emulate sh) >/dev/null 2>&1; then :
+  emulate sh
+  NULLCMD=:
+  # Pre-4.2 versions of Zsh do word splitting on \${1+\"\$@\"}, which
+  # is contrary to our usage.  Disable this feature.
+  alias -g '\${1+\"\$@\"}'='\"\$@\"'
+  setopt NO_GLOB_SUBST
+else
+  case \`(set -o) 2>/dev/null\` in #(
+  *posix*) :
+    set -o posix ;; #(
+  *) :
+     ;;
+esac
+fi
+"
+  as_required="as_fn_return () { (exit \$1); }
+as_fn_success () { as_fn_return 0; }
+as_fn_failure () { as_fn_return 1; }
+as_fn_ret_success () { return 0; }
+as_fn_ret_failure () { return 1; }
+
+exitcode=0
+as_fn_success || { exitcode=1; echo as_fn_success failed.; }
+as_fn_failure && { exitcode=1; echo as_fn_failure succeeded.; }
+as_fn_ret_success || { exitcode=1; echo as_fn_ret_success failed.; }
+as_fn_ret_failure && { exitcode=1; echo as_fn_ret_failure succeeded.; }
+if ( set x; as_fn_ret_success y && test x = \"\$1\" ); then :
+
+else
+  exitcode=1; echo positional parameters were not saved.
+fi
+test x\$exitcode = x0 || exit 1"
+  as_suggested="  as_lineno_1=";as_suggested=$as_suggested$LINENO;as_suggested=$as_suggested" as_lineno_1a=\$LINENO
+  as_lineno_2=";as_suggested=$as_suggested$LINENO;as_suggested=$as_suggested" as_lineno_2a=\$LINENO
+  eval 'test \"x\$as_lineno_1'\$as_run'\" != \"x\$as_lineno_2'\$as_run'\" &&
+  test \"x\`expr \$as_lineno_1'\$as_run' + 1\`\" = \"x\$as_lineno_2'\$as_run'\"' || exit 1
+test \$(( 1 + 1 )) = 2 || exit 1"
+  if (eval "$as_required") 2>/dev/null; then :
+  as_have_required=yes
+else
+  as_have_required=no
+fi
+  if test x$as_have_required = xyes && (eval "$as_suggested") 2>/dev/null; then :
+
+else
+  as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+as_found=false
+for as_dir in /bin$PATH_SEPARATOR/usr/bin$PATH_SEPARATOR$PATH
 do
-  if (set +x; test -z "`(eval $as_var=C; export $as_var) 2>&1`"); then
-    eval $as_var=C; export $as_var
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+  as_found=:
+  case $as_dir in #(
+	 /*)
+	   for as_base in sh bash ksh sh5; do
+	     # Try only shells that exist, to save several forks.
+	     as_shell=$as_dir/$as_base
+	     if { test -f "$as_shell" || test -f "$as_shell.exe"; } &&
+		    { $as_echo "$as_bourne_compatible""$as_required" | as_run=a "$as_shell"; } 2>/dev/null; then :
+  CONFIG_SHELL=$as_shell as_have_required=yes
+		   if { $as_echo "$as_bourne_compatible""$as_suggested" | as_run=a "$as_shell"; } 2>/dev/null; then :
+  break 2
+fi
+fi
+	   done;;
+       esac
+  as_found=false
+done
+$as_found || { if { test -f "$SHELL" || test -f "$SHELL.exe"; } &&
+	      { $as_echo "$as_bourne_compatible""$as_required" | as_run=a "$SHELL"; } 2>/dev/null; then :
+  CONFIG_SHELL=$SHELL as_have_required=yes
+fi; }
+IFS=$as_save_IFS
+
+
+      if test "x$CONFIG_SHELL" != x; then :
+  # We cannot yet assume a decent shell, so we have to provide a
+	# neutralization value for shells without unset; and this also
+	# works around shells that cannot unset nonexistent variables.
+	BASH_ENV=/dev/null
+	ENV=/dev/null
+	(unset BASH_ENV) >/dev/null 2>&1 && unset BASH_ENV ENV
+	export CONFIG_SHELL
+	exec "$CONFIG_SHELL" "$as_myself" ${1+"$@"}
+fi
+
+    if test x$as_have_required = xno; then :
+  $as_echo "$0: This script requires a shell more modern than all"
+  $as_echo "$0: the shells that I found on your system."
+  if test x${ZSH_VERSION+set} = xset ; then
+    $as_echo "$0: In particular, zsh $ZSH_VERSION has bugs and should"
+    $as_echo "$0: be upgraded to zsh 4.3.4 or later."
   else
-    $as_unset $as_var
+    $as_echo "$0: Please tell bug-autoconf@gnu.org about your system,
+$0: including any error possibly output before this
+$0: message. Then install a modern shell, or manually run
+$0: the script under such a shell if you do have one."
   fi
-done
+  exit 1
+fi
+fi
+fi
+SHELL=${CONFIG_SHELL-/bin/sh}
+export SHELL
+# Unset more variables known to interfere with behavior of common tools.
+CLICOLOR_FORCE= GREP_OPTIONS=
+unset CLICOLOR_FORCE GREP_OPTIONS
+
+## --------------------- ##
+## M4sh Shell Functions. ##
+## --------------------- ##
+# as_fn_unset VAR
+# ---------------
+# Portably unset VAR.
+as_fn_unset ()
+{
+  { eval $1=; unset $1;}
+}
+as_unset=as_fn_unset
+
+# as_fn_set_status STATUS
+# -----------------------
+# Set $? to STATUS, without forking.
+as_fn_set_status ()
+{
+  return $1
+} # as_fn_set_status
 
-# Required to use basename.
-if expr a : '\(a\)' >/dev/null 2>&1; then
+# as_fn_exit STATUS
+# -----------------
+# Exit the shell with STATUS, even in a "trap 0" or "set -e" context.
+as_fn_exit ()
+{
+  set +e
+  as_fn_set_status $1
+  exit $1
+} # as_fn_exit
+
+# as_fn_mkdir_p
+# -------------
+# Create "$as_dir" as a directory, including parents if necessary.
+as_fn_mkdir_p ()
+{
+
+  case $as_dir in #(
+  -*) as_dir=./$as_dir;;
+  esac
+  test -d "$as_dir" || eval $as_mkdir_p || {
+    as_dirs=
+    while :; do
+      case $as_dir in #(
+      *\'*) as_qdir=`$as_echo "$as_dir" | sed "s/'/'\\\\\\\\''/g"`;; #'(
+      *) as_qdir=$as_dir;;
+      esac
+      as_dirs="'$as_qdir' $as_dirs"
+      as_dir=`$as_dirname -- "$as_dir" ||
+$as_expr X"$as_dir" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
+	 X"$as_dir" : 'X\(//\)[^/]' \| \
+	 X"$as_dir" : 'X\(//\)$' \| \
+	 X"$as_dir" : 'X\(/\)' \| . 2>/dev/null ||
+$as_echo X"$as_dir" |
+    sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{
+	    s//\1/
+	    q
+	  }
+	  /^X\(\/\/\)[^/].*/{
+	    s//\1/
+	    q
+	  }
+	  /^X\(\/\/\)$/{
+	    s//\1/
+	    q
+	  }
+	  /^X\(\/\).*/{
+	    s//\1/
+	    q
+	  }
+	  s/.*/./; q'`
+      test -d "$as_dir" && break
+    done
+    test -z "$as_dirs" || eval "mkdir $as_dirs"
+  } || test -d "$as_dir" || as_fn_error "cannot create directory $as_dir"
+
+
+} # as_fn_mkdir_p
+# as_fn_append VAR VALUE
+# ----------------------
+# Append the text in VALUE to the end of the definition contained in VAR. Take
+# advantage of any shell optimizations that allow amortized linear growth over
+# repeated appends, instead of the typical quadratic growth present in naive
+# implementations.
+if (eval "as_var=1; as_var+=2; test x\$as_var = x12") 2>/dev/null; then :
+  eval 'as_fn_append ()
+  {
+    eval $1+=\$2
+  }'
+else
+  as_fn_append ()
+  {
+    eval $1=\$$1\$2
+  }
+fi # as_fn_append
+
+# as_fn_arith ARG...
+# ------------------
+# Perform arithmetic evaluation on the ARGs, and store the result in the
+# global $as_val. Take advantage of shells that can avoid forks. The arguments
+# must be portable across $(()) and expr.
+if (eval "test \$(( 1 + 1 )) = 2") 2>/dev/null; then :
+  eval 'as_fn_arith ()
+  {
+    as_val=$(( $* ))
+  }'
+else
+  as_fn_arith ()
+  {
+    as_val=`expr "$@" || test $? -eq 1`
+  }
+fi # as_fn_arith
+
+
+# as_fn_error ERROR [LINENO LOG_FD]
+# ---------------------------------
+# Output "`basename $0`: error: ERROR" to stderr. If LINENO and LOG_FD are
+# provided, also output the error to LOG_FD, referencing LINENO. Then exit the
+# script with status $?, using 1 if that was 0.
+as_fn_error ()
+{
+  as_status=$?; test $as_status -eq 0 && as_status=1
+  if test "$3"; then
+    as_lineno=${as_lineno-"$2"} as_lineno_stack=as_lineno_stack=$as_lineno_stack
+    $as_echo "$as_me:${as_lineno-$LINENO}: error: $1" >&$3
+  fi
+  $as_echo "$as_me: error: $1" >&2
+  as_fn_exit $as_status
+} # as_fn_error
+
+if expr a : '\(a\)' >/dev/null 2>&1 &&
+   test "X`expr 00001 : '.*\(...\)'`" = X001; then
   as_expr=expr
 else
   as_expr=false
 fi
 
-if (basename /) >/dev/null 2>&1 && test "X`basename / 2>&1`" = "X/"; then
+if (basename -- /) >/dev/null 2>&1 && test "X`basename -- / 2>&1`" = "X/"; then
   as_basename=basename
 else
   as_basename=false
 fi
 
+if (as_dir=`dirname -- /` && test "X$as_dir" = X/) >/dev/null 2>&1; then
+  as_dirname=dirname
+else
+  as_dirname=false
+fi
 
-# Name of the executable.
-as_me=`$as_basename "$0" ||
+as_me=`$as_basename -- "$0" ||
 $as_expr X/"$0" : '.*/\([^/][^/]*\)/*$' \| \
 	 X"$0" : 'X\(//\)$' \| \
-	 X"$0" : 'X\(/\)$' \| \
-	 .     : '\(.\)' 2>/dev/null ||
-echo X/"$0" |
-    sed '/^.*\/\([^/][^/]*\)\/*$/{ s//\1/; q; }
-  	  /^X\/\(\/\/\)$/{ s//\1/; q; }
-  	  /^X\/\(\/\).*/{ s//\1/; q; }
-  	  s/.*/./; q'`
-
+	 X"$0" : 'X\(/\)' \| . 2>/dev/null ||
+$as_echo X/"$0" |
+    sed '/^.*\/\([^/][^/]*\)\/*$/{
+	    s//\1/
+	    q
+	  }
+	  /^X\/\(\/\/\)$/{
+	    s//\1/
+	    q
+	  }
+	  /^X\/\(\/\).*/{
+	    s//\1/
+	    q
+	  }
+	  s/.*/./; q'`
 
-# PATH needs CR, and LINENO needs CR and PATH.
 # Avoid depending upon Character Ranges.
 as_cr_letters='abcdefghijklmnopqrstuvwxyz'
 as_cr_LETTERS='ABCDEFGHIJKLMNOPQRSTUVWXYZ'
@@ -83,146 +415,107 @@ as_cr_Letters=$as_cr_letters$as_cr_LETTERS
 as_cr_digits='0123456789'
 as_cr_alnum=$as_cr_Letters$as_cr_digits
 
-# The user is always right.
-if test "${PATH_SEPARATOR+set}" != set; then
-  echo "#! /bin/sh" >conf$$.sh
-  echo  "exit 0"   >>conf$$.sh
-  chmod +x conf$$.sh
-  if (PATH="/nonexistent;."; conf$$.sh) >/dev/null 2>&1; then
-    PATH_SEPARATOR=';'
-  else
-    PATH_SEPARATOR=:
-  fi
-  rm -f conf$$.sh
-fi
-
-
-  as_lineno_1=$LINENO
-  as_lineno_2=$LINENO
-  as_lineno_3=`(expr $as_lineno_1 + 1) 2>/dev/null`
-  test "x$as_lineno_1" != "x$as_lineno_2" &&
-  test "x$as_lineno_3"  = "x$as_lineno_2"  || {
-  # Find who we are.  Look in the path if we contain no path at all
-  # relative or not.
-  case $0 in
-    *[\\/]* ) as_myself=$0 ;;
-    *) as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
-  IFS=$as_save_IFS
-  test -z "$as_dir" && as_dir=.
-  test -r "$as_dir/$0" && as_myself=$as_dir/$0 && break
-done
-
-       ;;
-  esac
-  # We did not find ourselves, most probably we were run as `sh COMMAND'
-  # in which case we are not to be found in the path.
-  if test "x$as_myself" = x; then
-    as_myself=$0
-  fi
-  if test ! -f "$as_myself"; then
-    { echo "$as_me: error: cannot find myself; rerun with an absolute path" >&2
-   { (exit 1); exit 1; }; }
-  fi
-  case $CONFIG_SHELL in
-  '')
-    as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in /bin$PATH_SEPARATOR/usr/bin$PATH_SEPARATOR$PATH
-do
-  IFS=$as_save_IFS
-  test -z "$as_dir" && as_dir=.
-  for as_base in sh bash ksh sh5; do
-	 case $as_dir in
-	 /*)
-	   if ("$as_dir/$as_base" -c '
-  as_lineno_1=$LINENO
-  as_lineno_2=$LINENO
-  as_lineno_3=`(expr $as_lineno_1 + 1) 2>/dev/null`
-  test "x$as_lineno_1" != "x$as_lineno_2" &&
-  test "x$as_lineno_3"  = "x$as_lineno_2" ') 2>/dev/null; then
-	     $as_unset BASH_ENV || test "${BASH_ENV+set}" != set || { BASH_ENV=; export BASH_ENV; }
-	     $as_unset ENV || test "${ENV+set}" != set || { ENV=; export ENV; }
-	     CONFIG_SHELL=$as_dir/$as_base
-	     export CONFIG_SHELL
-	     exec "$CONFIG_SHELL" "$0" ${1+"$@"}
-	   fi;;
-	 esac
-       done
-done
-;;
-  esac
 
-  # Create $as_me.lineno as a copy of $as_myself, but with $LINENO
-  # uniformly replaced by the line number.  The first 'sed' inserts a
-  # line-number line before each line; the second 'sed' does the real
-  # work.  The second script uses 'N' to pair each line-number line
-  # with the numbered line, and appends trailing '-' during
-  # substitution so that $LINENO is not a special case at line end.
-  # (Raja R Harinath suggested sed '=', and Paul Eggert wrote the
-  # second 'sed' script.  Blame Lee E. McMahon for sed's syntax.  :-)
-  sed '=' <$as_myself |
+  as_lineno_1=$LINENO as_lineno_1a=$LINENO
+  as_lineno_2=$LINENO as_lineno_2a=$LINENO
+  eval 'test "x$as_lineno_1'$as_run'" != "x$as_lineno_2'$as_run'" &&
+  test "x`expr $as_lineno_1'$as_run' + 1`" = "x$as_lineno_2'$as_run'"' || {
+  # Blame Lee E. McMahon (1931-1989) for sed's syntax.  :-)
+  sed -n '
+    p
+    /[$]LINENO/=
+  ' <$as_myself |
     sed '
+      s/[$]LINENO.*/&-/
+      t lineno
+      b
+      :lineno
       N
-      s,$,-,
-      : loop
-      s,^\(['$as_cr_digits']*\)\(.*\)[$]LINENO\([^'$as_cr_alnum'_]\),\1\2\1\3,
+      :loop
+      s/[$]LINENO\([^'$as_cr_alnum'_].*\n\)\(.*\)/\2\1\2/
       t loop
-      s,-$,,
-      s,^['$as_cr_digits']*\n,,
+      s/-\n.*//
     ' >$as_me.lineno &&
-  chmod +x $as_me.lineno ||
-    { echo "$as_me: error: cannot create $as_me.lineno; rerun with a POSIX shell" >&2
-   { (exit 1); exit 1; }; }
+  chmod +x "$as_me.lineno" ||
+    { $as_echo "$as_me: error: cannot create $as_me.lineno; rerun with a POSIX shell" >&2; as_fn_exit 1; }
 
   # Don't try to exec as it changes $[0], causing all sort of problems
   # (the dirname of $[0] is not the place where we might find the
-  # original and so on.  Autoconf is especially sensible to this).
-  . ./$as_me.lineno
+  # original and so on.  Autoconf is especially sensitive to this).
+  . "./$as_me.lineno"
   # Exit status is that of the last command.
   exit
 }
 
-
-case `echo "testing\c"; echo 1,2,3`,`echo -n testing; echo 1,2,3` in
-  *c*,-n*) ECHO_N= ECHO_C='
-' ECHO_T='	' ;;
-  *c*,*  ) ECHO_N=-n ECHO_C= ECHO_T= ;;
-  *)       ECHO_N= ECHO_C='\c' ECHO_T= ;;
+ECHO_C= ECHO_N= ECHO_T=
+case `echo -n x` in #(((((
+-n*)
+  case `echo 'xy\c'` in
+  *c*) ECHO_T='	';;	# ECHO_T is single tab character.
+  xy)  ECHO_C='\c';;
+  *)   echo `echo ksh88 bug on AIX 6.1` > /dev/null
+       ECHO_T='	';;
+  esac;;
+*)
+  ECHO_N='-n';;
 esac
 
-if expr a : '\(a\)' >/dev/null 2>&1; then
-  as_expr=expr
+rm -f conf$$ conf$$.exe conf$$.file
+if test -d conf$$.dir; then
+  rm -f conf$$.dir/conf$$.file
 else
-  as_expr=false
+  rm -f conf$$.dir
+  mkdir conf$$.dir 2>/dev/null
 fi
-
-rm -f conf$$ conf$$.exe conf$$.file
-echo >conf$$.file
-if ln -s conf$$.file conf$$ 2>/dev/null; then
-  # We could just check for DJGPP; but this test a) works b) is more generic
-  # and c) will remain valid once DJGPP supports symlinks (DJGPP 2.04).
-  if test -f conf$$.exe; then
-    # Don't use ln at all; we don't have any links
-    as_ln_s='cp -p'
-  else
+if (echo >conf$$.file) 2>/dev/null; then
+  if ln -s conf$$.file conf$$ 2>/dev/null; then
     as_ln_s='ln -s'
+    # ... but there are two gotchas:
+    # 1) On MSYS, both `ln -s file dir' and `ln file dir' fail.
+    # 2) DJGPP < 2.04 has no symlinks; `ln -s' creates a wrapper executable.
+    # In both cases, we have to default to `cp -p'.
+    ln -s conf$$.file conf$$.dir 2>/dev/null && test ! -f conf$$.exe ||
+      as_ln_s='cp -p'
+  elif ln conf$$.file conf$$ 2>/dev/null; then
+    as_ln_s=ln
+  else
+    as_ln_s='cp -p'
   fi
-elif ln conf$$.file conf$$ 2>/dev/null; then
-  as_ln_s=ln
 else
   as_ln_s='cp -p'
 fi
-rm -f conf$$ conf$$.exe conf$$.file
+rm -f conf$$ conf$$.exe conf$$.dir/conf$$.file conf$$.file
+rmdir conf$$.dir 2>/dev/null
 
 if mkdir -p . 2>/dev/null; then
-  as_mkdir_p=:
+  as_mkdir_p='mkdir -p "$as_dir"'
 else
   test -d ./-p && rmdir ./-p
   as_mkdir_p=false
 fi
 
-as_executable_p="test -f"
+if test -x / >/dev/null 2>&1; then
+  as_test_x='test -x'
+else
+  if ls -dL / >/dev/null 2>&1; then
+    as_ls_L_option=L
+  else
+    as_ls_L_option=
+  fi
+  as_test_x='
+    eval sh -c '\''
+      if test -d "$1"; then
+	test -d "$1/.";
+      else
+	case $1 in #(
+	-*)set "./$1";;
+	esac;
+	case `ls -ld'$as_ls_L_option' "$1" 2>/dev/null` in #((
+	???[sx]*):;;*)false;;esac;fi
+    '\'' sh
+  '
+fi
+as_executable_p=$as_test_x
 
 # Sed expression to map a string onto a valid CPP name.
 as_tr_cpp="eval sed 'y%*$as_cr_letters%P$as_cr_LETTERS%;s%[^_$as_cr_alnum]%_%g'"
@@ -231,38 +524,24 @@ as_tr_cpp="eval sed 'y%*$as_cr_letters%P$as_cr_LETTERS%;s%[^_$as_cr_alnum]%_%g'"
 as_tr_sh="eval sed 'y%*+%pp%;s%[^_$as_cr_alnum]%_%g'"
 
 
-# IFS
-# We need space, tab and new line, in precisely that order.
-as_nl='
-'
-IFS=" 	$as_nl"
-
-# CDPATH.
-$as_unset CDPATH
-
+exec 7<&0 </dev/null 6>&1
 
 # Name of the host.
 # hostname on some systems (SVR3.2, Linux) returns a bogus exit status,
 # so uname gets run too.
 ac_hostname=`(hostname || uname -n) 2>/dev/null | sed 1q`
 
-exec 6>&1
-
 #
 # Initializations.
 #
 ac_default_prefix=/usr/local
+ac_clean_files=
 ac_config_libobj_dir=.
+LIBOBJS=
 cross_compiling=no
 subdirs=
 MFLAGS=
 MAKEFLAGS=
-SHELL=${CONFIG_SHELL-/bin/sh}
-
-# Maximum number of lines to put in a shell here document.
-# This variable seems obsolete.  It should probably be removed, and
-# only ac_max_sed_lines should be used.
-: ${ac_max_here_lines=38}
 
 # Identity of this package.
 PACKAGE_NAME=
@@ -270,52 +549,240 @@ PACKAGE_TARNAME=
 PACKAGE_VERSION=
 PACKAGE_STRING=
 PACKAGE_BUGREPORT=
+PACKAGE_URL=
 
 ac_unique_file="Makefile.in"
 # Factoring default headers for most tests.
 ac_includes_default="\
 #include <stdio.h>
-#if HAVE_SYS_TYPES_H
+#ifdef HAVE_SYS_TYPES_H
 # include <sys/types.h>
 #endif
-#if HAVE_SYS_STAT_H
+#ifdef HAVE_SYS_STAT_H
 # include <sys/stat.h>
 #endif
-#if STDC_HEADERS
+#ifdef STDC_HEADERS
 # include <stdlib.h>
 # include <stddef.h>
 #else
-# if HAVE_STDLIB_H
+# ifdef HAVE_STDLIB_H
 #  include <stdlib.h>
 # endif
 #endif
-#if HAVE_STRING_H
-# if !STDC_HEADERS && HAVE_MEMORY_H
+#ifdef HAVE_STRING_H
+# if !defined STDC_HEADERS && defined HAVE_MEMORY_H
 #  include <memory.h>
 # endif
 # include <string.h>
 #endif
-#if HAVE_STRINGS_H
+#ifdef HAVE_STRINGS_H
 # include <strings.h>
 #endif
-#if HAVE_INTTYPES_H
+#ifdef HAVE_INTTYPES_H
 # include <inttypes.h>
-#else
-# if HAVE_STDINT_H
-#  include <stdint.h>
-# endif
 #endif
-#if HAVE_UNISTD_H
+#ifdef HAVE_STDINT_H
+# include <stdint.h>
+#endif
+#ifdef HAVE_UNISTD_H
 # include <unistd.h>
 #endif"
 
-ac_subst_vars='sim_environment sim_alignment sim_assert sim_bitsize sim_endian sim_hostendian sim_float sim_scache sim_default_model sim_hw_cflags sim_hw_objs sim_hw sim_inline sim_packages sim_regparm sim_reserved_bits sim_smp sim_stdcall sim_xor_endian WARN_CFLAGS WERROR_CFLAGS SHELL PATH_SEPARATOR PACKAGE_NAME PACKAGE_TARNAME PACKAGE_VERSION PACKAGE_STRING PACKAGE_BUGREPORT exec_prefix prefix program_transform_name bindir sbindir libexecdir datadir sysconfdir sharedstatedir localstatedir libdir includedir oldincludedir infodir mandir build_alias host_alias target_alias DEFS ECHO_C ECHO_N ECHO_T LIBS INSTALL_PROGRAM INSTALL_SCRIPT INSTALL_DATA CC CFLAGS LDFLAGS CPPFLAGS ac_ct_CC EXEEXT OBJEXT USE_NLS LIBINTL LIBINTL_DEP INCINTL XGETTEXT GMSGFMT POSUB CATALOGS DATADIRNAME INSTOBJEXT GENCAT CATOBJEXT PKGVERSION REPORT_BUGS_TO REPORT_BUGS_TEXI build build_cpu build_vendor build_os host host_cpu host_vendor host_os target target_cpu target_vendor target_os CPP EGREP LIBOBJS CC_FOR_BUILD CFLAGS_FOR_BUILD HDEFINES AR RANLIB ac_ct_RANLIB sim_cflags sim_warnings sim_line_nr sim_config sim_opcode sim_switch sim_dup sim_decode_mechanism sim_jump sim_filter sim_icache sim_hw_src sim_hw_obj sim_pk_src sim_pk_obj sim_bswap sim_igen_smp sim_hostbitsize sim_env sim_timebase sim_trace sim_reserved sim_monitor sim_model sim_model_issue sim_stdio sim_termio sim_devzero sim_callback sim_targ_vals sim_fpu_cflags sim_fpu LTLIBOBJS'
+ac_subst_vars='LTLIBOBJS
+sim_fpu
+sim_fpu_cflags
+sim_targ_vals
+sim_callback
+sim_devzero
+sim_termio
+sim_stdio
+sim_model_issue
+sim_model
+sim_monitor
+sim_reserved
+sim_trace
+sim_timebase
+sim_env
+sim_hostbitsize
+sim_igen_smp
+sim_bswap
+sim_pk_obj
+sim_pk_src
+sim_hw_obj
+sim_hw_src
+sim_icache
+sim_filter
+sim_jump
+sim_decode_mechanism
+sim_dup
+sim_switch
+sim_opcode
+sim_config
+sim_line_nr
+sim_warnings
+sim_cflags
+RANLIB
+AR
+HDEFINES
+CFLAGS_FOR_BUILD
+CC_FOR_BUILD
+LIBOBJS
+target_os
+target_vendor
+target_cpu
+target
+host_os
+host_vendor
+host_cpu
+host
+build_os
+build_vendor
+build_cpu
+build
+REPORT_BUGS_TEXI
+REPORT_BUGS_TO
+PKGVERSION
+EGREP
+GREP
+CPP
+CATOBJEXT
+GENCAT
+INSTOBJEXT
+DATADIRNAME
+CATALOGS
+POSUB
+GMSGFMT
+XGETTEXT
+INCINTL
+LIBINTL_DEP
+LIBINTL
+USE_NLS
+OBJEXT
+EXEEXT
+ac_ct_CC
+CPPFLAGS
+LDFLAGS
+CFLAGS
+CC
+INSTALL_DATA
+INSTALL_SCRIPT
+INSTALL_PROGRAM
+target_alias
+host_alias
+build_alias
+LIBS
+ECHO_T
+ECHO_N
+ECHO_C
+DEFS
+mandir
+localedir
+libdir
+psdir
+pdfdir
+dvidir
+htmldir
+infodir
+docdir
+oldincludedir
+includedir
+localstatedir
+sharedstatedir
+sysconfdir
+datadir
+datarootdir
+libexecdir
+sbindir
+bindir
+program_transform_name
+prefix
+exec_prefix
+PACKAGE_URL
+PACKAGE_BUGREPORT
+PACKAGE_STRING
+PACKAGE_VERSION
+PACKAGE_TARNAME
+PACKAGE_NAME
+PATH_SEPARATOR
+SHELL
+WERROR_CFLAGS
+WARN_CFLAGS
+sim_xor_endian
+sim_stdcall
+sim_smp
+sim_reserved_bits
+sim_regparm
+sim_packages
+sim_inline
+sim_hw
+sim_hw_objs
+sim_hw_cflags
+sim_default_model
+sim_scache
+sim_float
+sim_hostendian
+sim_endian
+sim_bitsize
+sim_assert
+sim_alignment
+sim_environment'
 ac_subst_files=''
-ac_pwd=`pwd`
+ac_user_opts='
+enable_option_checking
+enable_sim_alignment
+enable_sim_assert
+enable_sim_bitsize
+enable_sim_bswap
+enable_sim_cflags
+enable_sim_config
+enable_sim_decode_mechanism
+enable_sim_default_model
+enable_sim_duplicate
+enable_sim_endian
+enable_sim_env
+enable_sim_filter
+enable_sim_float
+enable_sim_hardware
+enable_sim_hostbitsize
+enable_sim_hostendian
+enable_sim_icache
+enable_sim_inline
+enable_sim_jump
+enable_sim_line_nr
+enable_sim_model
+enable_sim_model_issue
+enable_sim_monitor
+enable_sim_opcode
+enable_sim_packages
+enable_sim_regparm
+enable_sim_reserved_bits
+enable_sim_smp
+enable_sim_stdcall
+enable_sim_stdio
+enable_sim_switch
+enable_sim_timebase
+enable_sim_trace
+enable_sim_warnings
+enable_sim_xor_endian
+with_pkgversion
+with_bugurl
+'
+      ac_precious_vars='build_alias
+host_alias
+target_alias
+CC
+CFLAGS
+LDFLAGS
+LIBS
+CPPFLAGS
+CPP'
+
 
 # Initialize some variables set by options.
 ac_init_help=
 ac_init_version=false
+ac_unrecognized_opts=
+ac_unrecognized_sep=
 # The variables have the same names as the options, with
 # dashes changed to underlines.
 cache_file=/dev/null
@@ -338,34 +805,48 @@ x_libraries=NONE
 # and all the variables that are supposed to be based on exec_prefix
 # by default will actually change.
 # Use braces instead of parens because sh, perl, etc. also accept them.
+# (The list follows the same order as the GNU Coding Standards.)
 bindir='${exec_prefix}/bin'
 sbindir='${exec_prefix}/sbin'
 libexecdir='${exec_prefix}/libexec'
-datadir='${prefix}/share'
+datarootdir='${prefix}/share'
+datadir='${datarootdir}'
 sysconfdir='${prefix}/etc'
 sharedstatedir='${prefix}/com'
 localstatedir='${prefix}/var'
-libdir='${exec_prefix}/lib'
 includedir='${prefix}/include'
 oldincludedir='/usr/include'
-infodir='${prefix}/info'
-mandir='${prefix}/man'
+docdir='${datarootdir}/doc/${PACKAGE}'
+infodir='${datarootdir}/info'
+htmldir='${docdir}'
+dvidir='${docdir}'
+pdfdir='${docdir}'
+psdir='${docdir}'
+libdir='${exec_prefix}/lib'
+localedir='${datarootdir}/locale'
+mandir='${datarootdir}/man'
 
 ac_prev=
+ac_dashdash=
 for ac_option
 do
   # If the previous option needs an argument, assign it.
   if test -n "$ac_prev"; then
-    eval "$ac_prev=\$ac_option"
+    eval $ac_prev=\$ac_option
     ac_prev=
     continue
   fi
 
-  ac_optarg=`expr "x$ac_option" : 'x[^=]*=\(.*\)'`
+  case $ac_option in
+  *=*)	ac_optarg=`expr "X$ac_option" : '[^=]*=\(.*\)'` ;;
+  *)	ac_optarg=yes ;;
+  esac
 
   # Accept the important Cygnus configure options, so we can diagnose typos.
 
-  case $ac_option in
+  case $ac_dashdash$ac_option in
+  --)
+    ac_dashdash=yes ;;
 
   -bindir | --bindir | --bindi | --bind | --bin | --bi)
     ac_prev=bindir ;;
@@ -387,33 +868,59 @@ do
   --config-cache | -C)
     cache_file=config.cache ;;
 
-  -datadir | --datadir | --datadi | --datad | --data | --dat | --da)
+  -datadir | --datadir | --datadi | --datad)
     ac_prev=datadir ;;
-  -datadir=* | --datadir=* | --datadi=* | --datad=* | --data=* | --dat=* \
-  | --da=*)
+  -datadir=* | --datadir=* | --datadi=* | --datad=*)
     datadir=$ac_optarg ;;
 
+  -datarootdir | --datarootdir | --datarootdi | --datarootd | --dataroot \
+  | --dataroo | --dataro | --datar)
+    ac_prev=datarootdir ;;
+  -datarootdir=* | --datarootdir=* | --datarootdi=* | --datarootd=* \
+  | --dataroot=* | --dataroo=* | --dataro=* | --datar=*)
+    datarootdir=$ac_optarg ;;
+
   -disable-* | --disable-*)
-    ac_feature=`expr "x$ac_option" : 'x-*disable-\(.*\)'`
+    ac_useropt=`expr "x$ac_option" : 'x-*disable-\(.*\)'`
     # Reject names that are not valid shell variable names.
-    expr "x$ac_feature" : ".*[^-_$as_cr_alnum]" >/dev/null &&
-      { echo "$as_me: error: invalid feature name: $ac_feature" >&2
-   { (exit 1); exit 1; }; }
-    ac_feature=`echo $ac_feature | sed 's/-/_/g'`
-    eval "enable_$ac_feature=no" ;;
+    expr "x$ac_useropt" : ".*[^-+._$as_cr_alnum]" >/dev/null &&
+      as_fn_error "invalid feature name: $ac_useropt"
+    ac_useropt_orig=$ac_useropt
+    ac_useropt=`$as_echo "$ac_useropt" | sed 's/[-+.]/_/g'`
+    case $ac_user_opts in
+      *"
+"enable_$ac_useropt"
+"*) ;;
+      *) ac_unrecognized_opts="$ac_unrecognized_opts$ac_unrecognized_sep--disable-$ac_useropt_orig"
+	 ac_unrecognized_sep=', ';;
+    esac
+    eval enable_$ac_useropt=no ;;
+
+  -docdir | --docdir | --docdi | --doc | --do)
+    ac_prev=docdir ;;
+  -docdir=* | --docdir=* | --docdi=* | --doc=* | --do=*)
+    docdir=$ac_optarg ;;
+
+  -dvidir | --dvidir | --dvidi | --dvid | --dvi | --dv)
+    ac_prev=dvidir ;;
+  -dvidir=* | --dvidir=* | --dvidi=* | --dvid=* | --dvi=* | --dv=*)
+    dvidir=$ac_optarg ;;
 
   -enable-* | --enable-*)
-    ac_feature=`expr "x$ac_option" : 'x-*enable-\([^=]*\)'`
+    ac_useropt=`expr "x$ac_option" : 'x-*enable-\([^=]*\)'`
     # Reject names that are not valid shell variable names.
-    expr "x$ac_feature" : ".*[^-_$as_cr_alnum]" >/dev/null &&
-      { echo "$as_me: error: invalid feature name: $ac_feature" >&2
-   { (exit 1); exit 1; }; }
-    ac_feature=`echo $ac_feature | sed 's/-/_/g'`
-    case $ac_option in
-      *=*) ac_optarg=`echo "$ac_optarg" | sed "s/'/'\\\\\\\\''/g"`;;
-      *) ac_optarg=yes ;;
+    expr "x$ac_useropt" : ".*[^-+._$as_cr_alnum]" >/dev/null &&
+      as_fn_error "invalid feature name: $ac_useropt"
+    ac_useropt_orig=$ac_useropt
+    ac_useropt=`$as_echo "$ac_useropt" | sed 's/[-+.]/_/g'`
+    case $ac_user_opts in
+      *"
+"enable_$ac_useropt"
+"*) ;;
+      *) ac_unrecognized_opts="$ac_unrecognized_opts$ac_unrecognized_sep--enable-$ac_useropt_orig"
+	 ac_unrecognized_sep=', ';;
     esac
-    eval "enable_$ac_feature='$ac_optarg'" ;;
+    eval enable_$ac_useropt=\$ac_optarg ;;
 
   -exec-prefix | --exec_prefix | --exec-prefix | --exec-prefi \
   | --exec-pref | --exec-pre | --exec-pr | --exec-p | --exec- \
@@ -440,6 +947,12 @@ do
   -host=* | --host=* | --hos=* | --ho=*)
     host_alias=$ac_optarg ;;
 
+  -htmldir | --htmldir | --htmldi | --htmld | --html | --htm | --ht)
+    ac_prev=htmldir ;;
+  -htmldir=* | --htmldir=* | --htmldi=* | --htmld=* | --html=* | --htm=* \
+  | --ht=*)
+    htmldir=$ac_optarg ;;
+
   -includedir | --includedir | --includedi | --included | --include \
   | --includ | --inclu | --incl | --inc)
     ac_prev=includedir ;;
@@ -464,13 +977,16 @@ do
   | --libexe=* | --libex=* | --libe=*)
     libexecdir=$ac_optarg ;;
 
+  -localedir | --localedir | --localedi | --localed | --locale)
+    ac_prev=localedir ;;
+  -localedir=* | --localedir=* | --localedi=* | --localed=* | --locale=*)
+    localedir=$ac_optarg ;;
+
   -localstatedir | --localstatedir | --localstatedi | --localstated \
-  | --localstate | --localstat | --localsta | --localst \
-  | --locals | --local | --loca | --loc | --lo)
+  | --localstate | --localstat | --localsta | --localst | --locals)
     ac_prev=localstatedir ;;
   -localstatedir=* | --localstatedir=* | --localstatedi=* | --localstated=* \
-  | --localstate=* | --localstat=* | --localsta=* | --localst=* \
-  | --locals=* | --local=* | --loca=* | --loc=* | --lo=*)
+  | --localstate=* | --localstat=* | --localsta=* | --localst=* | --locals=*)
     localstatedir=$ac_optarg ;;
 
   -mandir | --mandir | --mandi | --mand | --man | --ma | --m)
@@ -535,6 +1051,16 @@ do
   | --progr-tra=* | --program-tr=* | --program-t=*)
     program_transform_name=$ac_optarg ;;
 
+  -pdfdir | --pdfdir | --pdfdi | --pdfd | --pdf | --pd)
+    ac_prev=pdfdir ;;
+  -pdfdir=* | --pdfdir=* | --pdfdi=* | --pdfd=* | --pdf=* | --pd=*)
+    pdfdir=$ac_optarg ;;
+
+  -psdir | --psdir | --psdi | --psd | --ps)
+    ac_prev=psdir ;;
+  -psdir=* | --psdir=* | --psdi=* | --psd=* | --ps=*)
+    psdir=$ac_optarg ;;
+
   -q | -quiet | --quiet | --quie | --qui | --qu | --q \
   | -silent | --silent | --silen | --sile | --sil)
     silent=yes ;;
@@ -585,26 +1111,36 @@ do
     ac_init_version=: ;;
 
   -with-* | --with-*)
-    ac_package=`expr "x$ac_option" : 'x-*with-\([^=]*\)'`
+    ac_useropt=`expr "x$ac_option" : 'x-*with-\([^=]*\)'`
     # Reject names that are not valid shell variable names.
-    expr "x$ac_package" : ".*[^-_$as_cr_alnum]" >/dev/null &&
-      { echo "$as_me: error: invalid package name: $ac_package" >&2
-   { (exit 1); exit 1; }; }
-    ac_package=`echo $ac_package| sed 's/-/_/g'`
-    case $ac_option in
-      *=*) ac_optarg=`echo "$ac_optarg" | sed "s/'/'\\\\\\\\''/g"`;;
-      *) ac_optarg=yes ;;
+    expr "x$ac_useropt" : ".*[^-+._$as_cr_alnum]" >/dev/null &&
+      as_fn_error "invalid package name: $ac_useropt"
+    ac_useropt_orig=$ac_useropt
+    ac_useropt=`$as_echo "$ac_useropt" | sed 's/[-+.]/_/g'`
+    case $ac_user_opts in
+      *"
+"with_$ac_useropt"
+"*) ;;
+      *) ac_unrecognized_opts="$ac_unrecognized_opts$ac_unrecognized_sep--with-$ac_useropt_orig"
+	 ac_unrecognized_sep=', ';;
     esac
-    eval "with_$ac_package='$ac_optarg'" ;;
+    eval with_$ac_useropt=\$ac_optarg ;;
 
   -without-* | --without-*)
-    ac_package=`expr "x$ac_option" : 'x-*without-\(.*\)'`
+    ac_useropt=`expr "x$ac_option" : 'x-*without-\(.*\)'`
     # Reject names that are not valid shell variable names.
-    expr "x$ac_package" : ".*[^-_$as_cr_alnum]" >/dev/null &&
-      { echo "$as_me: error: invalid package name: $ac_package" >&2
-   { (exit 1); exit 1; }; }
-    ac_package=`echo $ac_package | sed 's/-/_/g'`
-    eval "with_$ac_package=no" ;;
+    expr "x$ac_useropt" : ".*[^-+._$as_cr_alnum]" >/dev/null &&
+      as_fn_error "invalid package name: $ac_useropt"
+    ac_useropt_orig=$ac_useropt
+    ac_useropt=`$as_echo "$ac_useropt" | sed 's/[-+.]/_/g'`
+    case $ac_user_opts in
+      *"
+"with_$ac_useropt"
+"*) ;;
+      *) ac_unrecognized_opts="$ac_unrecognized_opts$ac_unrecognized_sep--without-$ac_useropt_orig"
+	 ac_unrecognized_sep=', ';;
+    esac
+    eval with_$ac_useropt=no ;;
 
   --x)
     # Obsolete; use --with-x.
@@ -624,26 +1160,25 @@ do
   | --x-librar=* | --x-libra=* | --x-libr=* | --x-lib=* | --x-li=* | --x-l=*)
     x_libraries=$ac_optarg ;;
 
-  -*) { echo "$as_me: error: unrecognized option: $ac_option
-Try \`$0 --help' for more information." >&2
-   { (exit 1); exit 1; }; }
+  -*) as_fn_error "unrecognized option: \`$ac_option'
+Try \`$0 --help' for more information."
     ;;
 
   *=*)
     ac_envvar=`expr "x$ac_option" : 'x\([^=]*\)='`
     # Reject names that are not valid shell variable names.
-    expr "x$ac_envvar" : ".*[^_$as_cr_alnum]" >/dev/null &&
-      { echo "$as_me: error: invalid variable name: $ac_envvar" >&2
-   { (exit 1); exit 1; }; }
-    ac_optarg=`echo "$ac_optarg" | sed "s/'/'\\\\\\\\''/g"`
-    eval "$ac_envvar='$ac_optarg'"
+    case $ac_envvar in #(
+      '' | [0-9]* | *[!_$as_cr_alnum]* )
+      as_fn_error "invalid variable name: \`$ac_envvar'" ;;
+    esac
+    eval $ac_envvar=\$ac_optarg
     export $ac_envvar ;;
 
   *)
     # FIXME: should be removed in autoconf 3.0.
-    echo "$as_me: WARNING: you should use --build, --host, --target" >&2
+    $as_echo "$as_me: WARNING: you should use --build, --host, --target" >&2
     expr "x$ac_option" : ".*[^-._$as_cr_alnum]" >/dev/null &&
-      echo "$as_me: WARNING: invalid host type: $ac_option" >&2
+      $as_echo "$as_me: WARNING: invalid host type: $ac_option" >&2
     : ${build_alias=$ac_option} ${host_alias=$ac_option} ${target_alias=$ac_option}
     ;;
 
@@ -652,31 +1187,36 @@ done
 
 if test -n "$ac_prev"; then
   ac_option=--`echo $ac_prev | sed 's/_/-/g'`
-  { echo "$as_me: error: missing argument to $ac_option" >&2
-   { (exit 1); exit 1; }; }
+  as_fn_error "missing argument to $ac_option"
 fi
 
-# Be sure to have absolute paths.
-for ac_var in exec_prefix prefix
-do
-  eval ac_val=$`echo $ac_var`
-  case $ac_val in
-    [\\/$]* | ?:[\\/]* | NONE | '' ) ;;
-    *)  { echo "$as_me: error: expected an absolute directory name for --$ac_var: $ac_val" >&2
-   { (exit 1); exit 1; }; };;
+if test -n "$ac_unrecognized_opts"; then
+  case $enable_option_checking in
+    no) ;;
+    fatal) as_fn_error "unrecognized options: $ac_unrecognized_opts" ;;
+    *)     $as_echo "$as_me: WARNING: unrecognized options: $ac_unrecognized_opts" >&2 ;;
   esac
-done
+fi
 
-# Be sure to have absolute paths.
-for ac_var in bindir sbindir libexecdir datadir sysconfdir sharedstatedir \
-	      localstatedir libdir includedir oldincludedir infodir mandir
+# Check all directory arguments for consistency.
+for ac_var in	exec_prefix prefix bindir sbindir libexecdir datarootdir \
+		datadir sysconfdir sharedstatedir localstatedir includedir \
+		oldincludedir docdir infodir htmldir dvidir pdfdir psdir \
+		libdir localedir mandir
 do
-  eval ac_val=$`echo $ac_var`
+  eval ac_val=\$$ac_var
+  # Remove trailing slashes.
   case $ac_val in
-    [\\/$]* | ?:[\\/]* ) ;;
-    *)  { echo "$as_me: error: expected an absolute directory name for --$ac_var: $ac_val" >&2
-   { (exit 1); exit 1; }; };;
+    */ )
+      ac_val=`expr "X$ac_val" : 'X\(.*[^/]\)' \| "X$ac_val" : 'X\(.*\)'`
+      eval $ac_var=\$ac_val;;
   esac
+  # Be sure to have absolute directory names.
+  case $ac_val in
+    [\\/$]* | ?:[\\/]* )  continue;;
+    NONE | '' ) case $ac_var in *prefix ) continue;; esac;;
+  esac
+  as_fn_error "expected an absolute directory name for --$ac_var: $ac_val"
 done
 
 # There might be people who depend on the old broken behavior: `$host'
@@ -690,7 +1230,7 @@ target=$target_alias
 if test "x$host_alias" != x; then
   if test "x$build_alias" = x; then
     cross_compiling=maybe
-    echo "$as_me: WARNING: If you wanted to set the --build type, don't use --host.
+    $as_echo "$as_me: WARNING: If you wanted to set the --build type, don't use --host.
     If a cross compiler is detected then cross compile mode will be used." >&2
   elif test "x$build_alias" != "x$host_alias"; then
     cross_compiling=yes
@@ -703,74 +1243,72 @@ test -n "$host_alias" && ac_tool_prefix=$host_alias-
 test "$silent" = yes && exec 6>/dev/null
 
 
+ac_pwd=`pwd` && test -n "$ac_pwd" &&
+ac_ls_di=`ls -di .` &&
+ac_pwd_ls_di=`cd "$ac_pwd" && ls -di .` ||
+  as_fn_error "working directory cannot be determined"
+test "X$ac_ls_di" = "X$ac_pwd_ls_di" ||
+  as_fn_error "pwd does not report name of working directory"
+
+
 # Find the source files, if location was not specified.
 if test -z "$srcdir"; then
   ac_srcdir_defaulted=yes
-  # Try the directory containing this script, then its parent.
-  ac_confdir=`(dirname "$0") 2>/dev/null ||
-$as_expr X"$0" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
-	 X"$0" : 'X\(//\)[^/]' \| \
-	 X"$0" : 'X\(//\)$' \| \
-	 X"$0" : 'X\(/\)' \| \
-	 .     : '\(.\)' 2>/dev/null ||
-echo X"$0" |
-    sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/; q; }
-  	  /^X\(\/\/\)[^/].*/{ s//\1/; q; }
-  	  /^X\(\/\/\)$/{ s//\1/; q; }
-  	  /^X\(\/\).*/{ s//\1/; q; }
-  	  s/.*/./; q'`
+  # Try the directory containing this script, then the parent directory.
+  ac_confdir=`$as_dirname -- "$as_myself" ||
+$as_expr X"$as_myself" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
+	 X"$as_myself" : 'X\(//\)[^/]' \| \
+	 X"$as_myself" : 'X\(//\)$' \| \
+	 X"$as_myself" : 'X\(/\)' \| . 2>/dev/null ||
+$as_echo X"$as_myself" |
+    sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{
+	    s//\1/
+	    q
+	  }
+	  /^X\(\/\/\)[^/].*/{
+	    s//\1/
+	    q
+	  }
+	  /^X\(\/\/\)$/{
+	    s//\1/
+	    q
+	  }
+	  /^X\(\/\).*/{
+	    s//\1/
+	    q
+	  }
+	  s/.*/./; q'`
   srcdir=$ac_confdir
-  if test ! -r $srcdir/$ac_unique_file; then
+  if test ! -r "$srcdir/$ac_unique_file"; then
     srcdir=..
   fi
 else
   ac_srcdir_defaulted=no
 fi
-if test ! -r $srcdir/$ac_unique_file; then
-  if test "$ac_srcdir_defaulted" = yes; then
-    { echo "$as_me: error: cannot find sources ($ac_unique_file) in $ac_confdir or .." >&2
-   { (exit 1); exit 1; }; }
-  else
-    { echo "$as_me: error: cannot find sources ($ac_unique_file) in $srcdir" >&2
-   { (exit 1); exit 1; }; }
-  fi
-fi
-(cd $srcdir && test -r ./$ac_unique_file) 2>/dev/null ||
-  { echo "$as_me: error: sources are in $srcdir, but \`cd $srcdir' does not work" >&2
-   { (exit 1); exit 1; }; }
-srcdir=`echo "$srcdir" | sed 's%\([^\\/]\)[\\/]*$%\1%'`
-ac_env_build_alias_set=${build_alias+set}
-ac_env_build_alias_value=$build_alias
-ac_cv_env_build_alias_set=${build_alias+set}
-ac_cv_env_build_alias_value=$build_alias
-ac_env_host_alias_set=${host_alias+set}
-ac_env_host_alias_value=$host_alias
-ac_cv_env_host_alias_set=${host_alias+set}
-ac_cv_env_host_alias_value=$host_alias
-ac_env_target_alias_set=${target_alias+set}
-ac_env_target_alias_value=$target_alias
-ac_cv_env_target_alias_set=${target_alias+set}
-ac_cv_env_target_alias_value=$target_alias
-ac_env_CC_set=${CC+set}
-ac_env_CC_value=$CC
-ac_cv_env_CC_set=${CC+set}
-ac_cv_env_CC_value=$CC
-ac_env_CFLAGS_set=${CFLAGS+set}
-ac_env_CFLAGS_value=$CFLAGS
-ac_cv_env_CFLAGS_set=${CFLAGS+set}
-ac_cv_env_CFLAGS_value=$CFLAGS
-ac_env_LDFLAGS_set=${LDFLAGS+set}
-ac_env_LDFLAGS_value=$LDFLAGS
-ac_cv_env_LDFLAGS_set=${LDFLAGS+set}
-ac_cv_env_LDFLAGS_value=$LDFLAGS
-ac_env_CPPFLAGS_set=${CPPFLAGS+set}
-ac_env_CPPFLAGS_value=$CPPFLAGS
-ac_cv_env_CPPFLAGS_set=${CPPFLAGS+set}
-ac_cv_env_CPPFLAGS_value=$CPPFLAGS
-ac_env_CPP_set=${CPP+set}
-ac_env_CPP_value=$CPP
-ac_cv_env_CPP_set=${CPP+set}
-ac_cv_env_CPP_value=$CPP
+if test ! -r "$srcdir/$ac_unique_file"; then
+  test "$ac_srcdir_defaulted" = yes && srcdir="$ac_confdir or .."
+  as_fn_error "cannot find sources ($ac_unique_file) in $srcdir"
+fi
+ac_msg="sources are in $srcdir, but \`cd $srcdir' does not work"
+ac_abs_confdir=`(
+	cd "$srcdir" && test -r "./$ac_unique_file" || as_fn_error "$ac_msg"
+	pwd)`
+# When building in place, set srcdir=.
+if test "$ac_abs_confdir" = "$ac_pwd"; then
+  srcdir=.
+fi
+# Remove unnecessary trailing slashes from srcdir.
+# Double slashes in file names in object file debugging info
+# mess up M-x gdb in Emacs.
+case $srcdir in
+*/) srcdir=`expr "X$srcdir" : 'X\(.*[^/]\)' \| "X$srcdir" : 'X\(.*\)'`;;
+esac
+for ac_var in $ac_precious_vars; do
+  eval ac_env_${ac_var}_set=\${${ac_var}+set}
+  eval ac_env_${ac_var}_value=\$${ac_var}
+  eval ac_cv_env_${ac_var}_set=\${${ac_var}+set}
+  eval ac_cv_env_${ac_var}_value=\$${ac_var}
+done
 
 #
 # Report the --help message.
@@ -799,14 +1337,11 @@ Configuration:
   -n, --no-create         do not create output files
       --srcdir=DIR        find the sources in DIR [configure dir or \`..']
 
-_ACEOF
-
-  cat <<_ACEOF
 Installation directories:
   --prefix=PREFIX         install architecture-independent files in PREFIX
-			  [$ac_default_prefix]
+                          [$ac_default_prefix]
   --exec-prefix=EPREFIX   install architecture-dependent files in EPREFIX
-			  [PREFIX]
+                          [PREFIX]
 
 By default, \`make install' will install all the files in
 \`$ac_default_prefix/bin', \`$ac_default_prefix/lib' etc.  You can specify
@@ -816,18 +1351,25 @@ for instance \`--prefix=\$HOME'.
 For better control, use the options below.
 
 Fine tuning of the installation directories:
-  --bindir=DIR           user executables [EPREFIX/bin]
-  --sbindir=DIR          system admin executables [EPREFIX/sbin]
-  --libexecdir=DIR       program executables [EPREFIX/libexec]
-  --datadir=DIR          read-only architecture-independent data [PREFIX/share]
-  --sysconfdir=DIR       read-only single-machine data [PREFIX/etc]
-  --sharedstatedir=DIR   modifiable architecture-independent data [PREFIX/com]
-  --localstatedir=DIR    modifiable single-machine data [PREFIX/var]
-  --libdir=DIR           object code libraries [EPREFIX/lib]
-  --includedir=DIR       C header files [PREFIX/include]
-  --oldincludedir=DIR    C header files for non-gcc [/usr/include]
-  --infodir=DIR          info documentation [PREFIX/info]
-  --mandir=DIR           man documentation [PREFIX/man]
+  --bindir=DIR            user executables [EPREFIX/bin]
+  --sbindir=DIR           system admin executables [EPREFIX/sbin]
+  --libexecdir=DIR        program executables [EPREFIX/libexec]
+  --sysconfdir=DIR        read-only single-machine data [PREFIX/etc]
+  --sharedstatedir=DIR    modifiable architecture-independent data [PREFIX/com]
+  --localstatedir=DIR     modifiable single-machine data [PREFIX/var]
+  --libdir=DIR            object code libraries [EPREFIX/lib]
+  --includedir=DIR        C header files [PREFIX/include]
+  --oldincludedir=DIR     C header files for non-gcc [/usr/include]
+  --datarootdir=DIR       read-only arch.-independent data root [PREFIX/share]
+  --datadir=DIR           read-only architecture-independent data [DATAROOTDIR]
+  --infodir=DIR           info documentation [DATAROOTDIR/info]
+  --localedir=DIR         locale-dependent data [DATAROOTDIR/locale]
+  --mandir=DIR            man documentation [DATAROOTDIR/man]
+  --docdir=DIR            documentation root [DATAROOTDIR/doc/PACKAGE]
+  --htmldir=DIR           html documentation [DOCDIR]
+  --dvidir=DIR            dvi documentation [DOCDIR]
+  --pdfdir=DIR            pdf documentation [DOCDIR]
+  --psdir=DIR             ps documentation [DOCDIR]
 _ACEOF
 
   cat <<\_ACEOF
@@ -849,6 +1391,7 @@ if test -n "$ac_init_help"; then
   cat <<\_ACEOF
 
 Optional Features:
+  --disable-option-checking  ignore unrecognized --enable/--with options
   --disable-FEATURE       do not include FEATURE (same as --enable-FEATURE=no)
   --enable-FEATURE[=ARG]  include FEATURE [ARG=yes]
   --enable-sim-alignment=align		Specify strict or nonstrict alignment.
@@ -898,126 +1441,599 @@ Some influential environment variables:
   CFLAGS      C compiler flags
   LDFLAGS     linker flags, e.g. -L<lib dir> if you have libraries in a
               nonstandard directory <lib dir>
-  CPPFLAGS    C/C++ preprocessor flags, e.g. -I<include dir> if you have
-              headers in a nonstandard directory <include dir>
+  LIBS        libraries to pass to the linker, e.g. -l<library>
+  CPPFLAGS    C/C++/Objective C preprocessor flags, e.g. -I<include dir> if
+              you have headers in a nonstandard directory <include dir>
   CPP         C preprocessor
 
 Use these variables to override the choices made by `configure' or to help
 it to find libraries and programs with nonstandard names/locations.
 
+Report bugs to the package provider.
 _ACEOF
+ac_status=$?
 fi
 
 if test "$ac_init_help" = "recursive"; then
   # If there are subdirs, report their specific --help.
-  ac_popdir=`pwd`
   for ac_dir in : $ac_subdirs_all; do test "x$ac_dir" = x: && continue
-    test -d $ac_dir || continue
+    test -d "$ac_dir" ||
+      { cd "$srcdir" && ac_pwd=`pwd` && srcdir=. && test -d "$ac_dir"; } ||
+      continue
     ac_builddir=.
 
-if test "$ac_dir" != .; then
-  ac_dir_suffix=/`echo "$ac_dir" | sed 's,^\.[\\/],,'`
-  # A "../" for each directory in $ac_dir_suffix.
-  ac_top_builddir=`echo "$ac_dir_suffix" | sed 's,/[^\\/]*,../,g'`
-else
-  ac_dir_suffix= ac_top_builddir=
-fi
+case "$ac_dir" in
+.) ac_dir_suffix= ac_top_builddir_sub=. ac_top_build_prefix= ;;
+*)
+  ac_dir_suffix=/`$as_echo "$ac_dir" | sed 's|^\.[\\/]||'`
+  # A ".." for each directory in $ac_dir_suffix.
+  ac_top_builddir_sub=`$as_echo "$ac_dir_suffix" | sed 's|/[^\\/]*|/..|g;s|/||'`
+  case $ac_top_builddir_sub in
+  "") ac_top_builddir_sub=. ac_top_build_prefix= ;;
+  *)  ac_top_build_prefix=$ac_top_builddir_sub/ ;;
+  esac ;;
+esac
+ac_abs_top_builddir=$ac_pwd
+ac_abs_builddir=$ac_pwd$ac_dir_suffix
+# for backward compatibility:
+ac_top_builddir=$ac_top_build_prefix
 
 case $srcdir in
-  .)  # No --srcdir option.  We are building in place.
+  .)  # We are building in place.
     ac_srcdir=.
-    if test -z "$ac_top_builddir"; then
-       ac_top_srcdir=.
-    else
-       ac_top_srcdir=`echo $ac_top_builddir | sed 's,/$,,'`
-    fi ;;
-  [\\/]* | ?:[\\/]* )  # Absolute path.
+    ac_top_srcdir=$ac_top_builddir_sub
+    ac_abs_top_srcdir=$ac_pwd ;;
+  [\\/]* | ?:[\\/]* )  # Absolute name.
     ac_srcdir=$srcdir$ac_dir_suffix;
-    ac_top_srcdir=$srcdir ;;
-  *) # Relative path.
-    ac_srcdir=$ac_top_builddir$srcdir$ac_dir_suffix
-    ac_top_srcdir=$ac_top_builddir$srcdir ;;
+    ac_top_srcdir=$srcdir
+    ac_abs_top_srcdir=$srcdir ;;
+  *) # Relative name.
+    ac_srcdir=$ac_top_build_prefix$srcdir$ac_dir_suffix
+    ac_top_srcdir=$ac_top_build_prefix$srcdir
+    ac_abs_top_srcdir=$ac_pwd/$srcdir ;;
 esac
-
-# Do not use `cd foo && pwd` to compute absolute paths, because
-# the directories may not exist.
-case `pwd` in
-.) ac_abs_builddir="$ac_dir";;
-*)
-  case "$ac_dir" in
-  .) ac_abs_builddir=`pwd`;;
-  [\\/]* | ?:[\\/]* ) ac_abs_builddir="$ac_dir";;
-  *) ac_abs_builddir=`pwd`/"$ac_dir";;
-  esac;;
-esac
-case $ac_abs_builddir in
-.) ac_abs_top_builddir=${ac_top_builddir}.;;
-*)
-  case ${ac_top_builddir}. in
-  .) ac_abs_top_builddir=$ac_abs_builddir;;
-  [\\/]* | ?:[\\/]* ) ac_abs_top_builddir=${ac_top_builddir}.;;
-  *) ac_abs_top_builddir=$ac_abs_builddir/${ac_top_builddir}.;;
-  esac;;
-esac
-case $ac_abs_builddir in
-.) ac_abs_srcdir=$ac_srcdir;;
-*)
-  case $ac_srcdir in
-  .) ac_abs_srcdir=$ac_abs_builddir;;
-  [\\/]* | ?:[\\/]* ) ac_abs_srcdir=$ac_srcdir;;
-  *) ac_abs_srcdir=$ac_abs_builddir/$ac_srcdir;;
-  esac;;
-esac
-case $ac_abs_builddir in
-.) ac_abs_top_srcdir=$ac_top_srcdir;;
-*)
-  case $ac_top_srcdir in
-  .) ac_abs_top_srcdir=$ac_abs_builddir;;
-  [\\/]* | ?:[\\/]* ) ac_abs_top_srcdir=$ac_top_srcdir;;
-  *) ac_abs_top_srcdir=$ac_abs_builddir/$ac_top_srcdir;;
-  esac;;
-esac
-
-    cd $ac_dir
-    # Check for guested configure; otherwise get Cygnus style configure.
-    if test -f $ac_srcdir/configure.gnu; then
-      echo
-      $SHELL $ac_srcdir/configure.gnu  --help=recursive
-    elif test -f $ac_srcdir/configure; then
-      echo
-      $SHELL $ac_srcdir/configure  --help=recursive
-    elif test -f $ac_srcdir/configure.ac ||
-	   test -f $ac_srcdir/configure.in; then
-      echo
-      $ac_configure --help
+ac_abs_srcdir=$ac_abs_top_srcdir$ac_dir_suffix
+
+    cd "$ac_dir" || { ac_status=$?; continue; }
+    # Check for guested configure.
+    if test -f "$ac_srcdir/configure.gnu"; then
+      echo &&
+      $SHELL "$ac_srcdir/configure.gnu" --help=recursive
+    elif test -f "$ac_srcdir/configure"; then
+      echo &&
+      $SHELL "$ac_srcdir/configure" --help=recursive
     else
-      echo "$as_me: WARNING: no configuration information is in $ac_dir" >&2
-    fi
-    cd $ac_popdir
+      $as_echo "$as_me: WARNING: no configuration information is in $ac_dir" >&2
+    fi || ac_status=$?
+    cd "$ac_pwd" || { ac_status=$?; break; }
   done
 fi
 
-test -n "$ac_init_help" && exit 0
+test -n "$ac_init_help" && exit $ac_status
 if $ac_init_version; then
   cat <<\_ACEOF
+configure
+generated by GNU Autoconf 2.64
 
-Copyright (C) 2003 Free Software Foundation, Inc.
+Copyright (C) 2009 Free Software Foundation, Inc.
 This configure script is free software; the Free Software Foundation
 gives unlimited permission to copy, distribute and modify it.
 _ACEOF
-  exit 0
+  exit
 fi
-exec 5>config.log
-cat >&5 <<_ACEOF
+
+## ------------------------ ##
+## Autoconf initialization. ##
+## ------------------------ ##
+
+# ac_fn_c_try_compile LINENO
+# --------------------------
+# Try to compile conftest.$ac_ext, and return whether this succeeded.
+ac_fn_c_try_compile ()
+{
+  as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack
+  rm -f conftest.$ac_objext
+  if { { ac_try="$ac_compile"
+case "(($ac_try" in
+  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+  *) ac_try_echo=$ac_try;;
+esac
+eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\""
+$as_echo "$ac_try_echo"; } >&5
+  (eval "$ac_compile") 2>conftest.err
+  ac_status=$?
+  if test -s conftest.err; then
+    grep -v '^ *+' conftest.err >conftest.er1
+    cat conftest.er1 >&5
+    mv -f conftest.er1 conftest.err
+  fi
+  $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+  test $ac_status = 0; } && {
+	 test -z "$ac_c_werror_flag" ||
+	 test ! -s conftest.err
+       } && test -s conftest.$ac_objext; then :
+  ac_retval=0
+else
+  $as_echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+	ac_retval=1
+fi
+  eval $as_lineno_stack; test "x$as_lineno_stack" = x && { as_lineno=; unset as_lineno;}
+  return $ac_retval
+
+} # ac_fn_c_try_compile
+
+# ac_fn_c_try_run LINENO
+# ----------------------
+# Try to link conftest.$ac_ext, and return whether this succeeded. Assumes
+# that executables *can* be run.
+ac_fn_c_try_run ()
+{
+  as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack
+  if { { ac_try="$ac_link"
+case "(($ac_try" in
+  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+  *) ac_try_echo=$ac_try;;
+esac
+eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\""
+$as_echo "$ac_try_echo"; } >&5
+  (eval "$ac_link") 2>&5
+  ac_status=$?
+  $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+  test $ac_status = 0; } && { ac_try='./conftest$ac_exeext'
+  { { case "(($ac_try" in
+  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+  *) ac_try_echo=$ac_try;;
+esac
+eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\""
+$as_echo "$ac_try_echo"; } >&5
+  (eval "$ac_try") 2>&5
+  ac_status=$?
+  $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+  test $ac_status = 0; }; }; then :
+  ac_retval=0
+else
+  $as_echo "$as_me: program exited with status $ac_status" >&5
+       $as_echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+       ac_retval=$ac_status
+fi
+  rm -rf conftest.dSYM conftest_ipa8_conftest.oo
+  eval $as_lineno_stack; test "x$as_lineno_stack" = x && { as_lineno=; unset as_lineno;}
+  return $ac_retval
+
+} # ac_fn_c_try_run
+
+# ac_fn_c_try_cpp LINENO
+# ----------------------
+# Try to preprocess conftest.$ac_ext, and return whether this succeeded.
+ac_fn_c_try_cpp ()
+{
+  as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack
+  if { { ac_try="$ac_cpp conftest.$ac_ext"
+case "(($ac_try" in
+  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+  *) ac_try_echo=$ac_try;;
+esac
+eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\""
+$as_echo "$ac_try_echo"; } >&5
+  (eval "$ac_cpp conftest.$ac_ext") 2>conftest.err
+  ac_status=$?
+  if test -s conftest.err; then
+    grep -v '^ *+' conftest.err >conftest.er1
+    cat conftest.er1 >&5
+    mv -f conftest.er1 conftest.err
+  fi
+  $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+  test $ac_status = 0; } >/dev/null && {
+	 test -z "$ac_c_preproc_warn_flag$ac_c_werror_flag" ||
+	 test ! -s conftest.err
+       }; then :
+  ac_retval=0
+else
+  $as_echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+    ac_retval=1
+fi
+  eval $as_lineno_stack; test "x$as_lineno_stack" = x && { as_lineno=; unset as_lineno;}
+  return $ac_retval
+
+} # ac_fn_c_try_cpp
+
+# ac_fn_c_check_header_compile LINENO HEADER VAR INCLUDES
+# -------------------------------------------------------
+# Tests whether HEADER exists and can be compiled using the include files in
+# INCLUDES, setting the cache variable VAR accordingly.
+ac_fn_c_check_header_compile ()
+{
+  as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack
+  { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $2" >&5
+$as_echo_n "checking for $2... " >&6; }
+if { as_var=$3; eval "test \"\${$as_var+set}\" = set"; }; then :
+  $as_echo_n "(cached) " >&6
+else
+  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+$4
+#include <$2>
+_ACEOF
+if ac_fn_c_try_compile "$LINENO"; then :
+  eval "$3=yes"
+else
+  eval "$3=no"
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+fi
+eval ac_res=\$$3
+	       { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_res" >&5
+$as_echo "$ac_res" >&6; }
+  eval $as_lineno_stack; test "x$as_lineno_stack" = x && { as_lineno=; unset as_lineno;}
+
+} # ac_fn_c_check_header_compile
+
+# ac_fn_c_try_link LINENO
+# -----------------------
+# Try to link conftest.$ac_ext, and return whether this succeeded.
+ac_fn_c_try_link ()
+{
+  as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack
+  rm -f conftest.$ac_objext conftest$ac_exeext
+  if { { ac_try="$ac_link"
+case "(($ac_try" in
+  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+  *) ac_try_echo=$ac_try;;
+esac
+eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\""
+$as_echo "$ac_try_echo"; } >&5
+  (eval "$ac_link") 2>conftest.err
+  ac_status=$?
+  if test -s conftest.err; then
+    grep -v '^ *+' conftest.err >conftest.er1
+    cat conftest.er1 >&5
+    mv -f conftest.er1 conftest.err
+  fi
+  $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+  test $ac_status = 0; } && {
+	 test -z "$ac_c_werror_flag" ||
+	 test ! -s conftest.err
+       } && test -s conftest$ac_exeext && {
+	 test "$cross_compiling" = yes ||
+	 $as_test_x conftest$ac_exeext
+       }; then :
+  ac_retval=0
+else
+  $as_echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+	ac_retval=1
+fi
+  # Delete the IPA/IPO (Inter Procedural Analysis/Optimization) information
+  # created by the PGI compiler (conftest_ipa8_conftest.oo), as it would
+  # interfere with the next link command; also delete a directory that is
+  # left behind by Apple's compiler.  We do this before executing the actions.
+  rm -rf conftest.dSYM conftest_ipa8_conftest.oo
+  eval $as_lineno_stack; test "x$as_lineno_stack" = x && { as_lineno=; unset as_lineno;}
+  return $ac_retval
+
+} # ac_fn_c_try_link
+
+# ac_fn_c_check_header_mongrel LINENO HEADER VAR INCLUDES
+# -------------------------------------------------------
+# Tests whether HEADER exists, giving a warning if it cannot be compiled using
+# the include files in INCLUDES and setting the cache variable VAR
+# accordingly.
+ac_fn_c_check_header_mongrel ()
+{
+  as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack
+  if { as_var=$3; eval "test \"\${$as_var+set}\" = set"; }; then :
+  { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $2" >&5
+$as_echo_n "checking for $2... " >&6; }
+if { as_var=$3; eval "test \"\${$as_var+set}\" = set"; }; then :
+  $as_echo_n "(cached) " >&6
+fi
+eval ac_res=\$$3
+	       { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_res" >&5
+$as_echo "$ac_res" >&6; }
+else
+  # Is the header compilable?
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking $2 usability" >&5
+$as_echo_n "checking $2 usability... " >&6; }
+cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+$4
+#include <$2>
+_ACEOF
+if ac_fn_c_try_compile "$LINENO"; then :
+  ac_header_compiler=yes
+else
+  ac_header_compiler=no
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_header_compiler" >&5
+$as_echo "$ac_header_compiler" >&6; }
+
+# Is the header present?
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking $2 presence" >&5
+$as_echo_n "checking $2 presence... " >&6; }
+cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+#include <$2>
+_ACEOF
+if ac_fn_c_try_cpp "$LINENO"; then :
+  ac_header_preproc=yes
+else
+  ac_header_preproc=no
+fi
+rm -f conftest.err conftest.$ac_ext
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_header_preproc" >&5
+$as_echo "$ac_header_preproc" >&6; }
+
+# So?  What about this header?
+case $ac_header_compiler:$ac_header_preproc:$ac_c_preproc_warn_flag in #((
+  yes:no: )
+    { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $2: accepted by the compiler, rejected by the preprocessor!" >&5
+$as_echo "$as_me: WARNING: $2: accepted by the compiler, rejected by the preprocessor!" >&2;}
+    { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $2: proceeding with the compiler's result" >&5
+$as_echo "$as_me: WARNING: $2: proceeding with the compiler's result" >&2;}
+    ;;
+  no:yes:* )
+    { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $2: present but cannot be compiled" >&5
+$as_echo "$as_me: WARNING: $2: present but cannot be compiled" >&2;}
+    { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $2:     check for missing prerequisite headers?" >&5
+$as_echo "$as_me: WARNING: $2:     check for missing prerequisite headers?" >&2;}
+    { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $2: see the Autoconf documentation" >&5
+$as_echo "$as_me: WARNING: $2: see the Autoconf documentation" >&2;}
+    { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $2:     section \"Present But Cannot Be Compiled\"" >&5
+$as_echo "$as_me: WARNING: $2:     section \"Present But Cannot Be Compiled\"" >&2;}
+    { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $2: proceeding with the compiler's result" >&5
+$as_echo "$as_me: WARNING: $2: proceeding with the compiler's result" >&2;}
+    ;;
+esac
+  { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $2" >&5
+$as_echo_n "checking for $2... " >&6; }
+if { as_var=$3; eval "test \"\${$as_var+set}\" = set"; }; then :
+  $as_echo_n "(cached) " >&6
+else
+  eval "$3=\$ac_header_compiler"
+fi
+eval ac_res=\$$3
+	       { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_res" >&5
+$as_echo "$ac_res" >&6; }
+fi
+  eval $as_lineno_stack; test "x$as_lineno_stack" = x && { as_lineno=; unset as_lineno;}
+
+} # ac_fn_c_check_header_mongrel
+
+# ac_fn_c_check_member LINENO AGGR MEMBER VAR INCLUDES
+# ----------------------------------------------------
+# Tries to find if the field MEMBER exists in type AGGR, after including
+# INCLUDES, setting cache variable VAR accordingly.
+ac_fn_c_check_member ()
+{
+  as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack
+  { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $2.$3" >&5
+$as_echo_n "checking for $2.$3... " >&6; }
+if { as_var=$4; eval "test \"\${$as_var+set}\" = set"; }; then :
+  $as_echo_n "(cached) " >&6
+else
+  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+$5
+int
+main ()
+{
+static $2 ac_aggr;
+if (ac_aggr.$3)
+return 0;
+  ;
+  return 0;
+}
+_ACEOF
+if ac_fn_c_try_compile "$LINENO"; then :
+  eval "$4=yes"
+else
+  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+$5
+int
+main ()
+{
+static $2 ac_aggr;
+if (sizeof ac_aggr.$3)
+return 0;
+  ;
+  return 0;
+}
+_ACEOF
+if ac_fn_c_try_compile "$LINENO"; then :
+  eval "$4=yes"
+else
+  eval "$4=no"
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+fi
+eval ac_res=\$$4
+	       { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_res" >&5
+$as_echo "$ac_res" >&6; }
+  eval $as_lineno_stack; test "x$as_lineno_stack" = x && { as_lineno=; unset as_lineno;}
+
+} # ac_fn_c_check_member
+
+# ac_fn_c_check_decl LINENO SYMBOL VAR
+# ------------------------------------
+# Tests whether SYMBOL is declared, setting cache variable VAR accordingly.
+ac_fn_c_check_decl ()
+{
+  as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack
+  { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether $2 is declared" >&5
+$as_echo_n "checking whether $2 is declared... " >&6; }
+if { as_var=$3; eval "test \"\${$as_var+set}\" = set"; }; then :
+  $as_echo_n "(cached) " >&6
+else
+  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+$4
+int
+main ()
+{
+#ifndef $2
+  (void) $2;
+#endif
+
+  ;
+  return 0;
+}
+_ACEOF
+if ac_fn_c_try_compile "$LINENO"; then :
+  eval "$3=yes"
+else
+  eval "$3=no"
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+fi
+eval ac_res=\$$3
+	       { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_res" >&5
+$as_echo "$ac_res" >&6; }
+  eval $as_lineno_stack; test "x$as_lineno_stack" = x && { as_lineno=; unset as_lineno;}
+
+} # ac_fn_c_check_decl
+
+# ac_fn_c_check_type LINENO TYPE VAR INCLUDES
+# -------------------------------------------
+# Tests whether TYPE exists after having included INCLUDES, setting cache
+# variable VAR accordingly.
+ac_fn_c_check_type ()
+{
+  as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack
+  { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $2" >&5
+$as_echo_n "checking for $2... " >&6; }
+if { as_var=$3; eval "test \"\${$as_var+set}\" = set"; }; then :
+  $as_echo_n "(cached) " >&6
+else
+  eval "$3=no"
+  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+$4
+int
+main ()
+{
+if (sizeof ($2))
+	 return 0;
+  ;
+  return 0;
+}
+_ACEOF
+if ac_fn_c_try_compile "$LINENO"; then :
+  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+$4
+int
+main ()
+{
+if (sizeof (($2)))
+	    return 0;
+  ;
+  return 0;
+}
+_ACEOF
+if ac_fn_c_try_compile "$LINENO"; then :
+
+else
+  eval "$3=yes"
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+fi
+eval ac_res=\$$3
+	       { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_res" >&5
+$as_echo "$ac_res" >&6; }
+  eval $as_lineno_stack; test "x$as_lineno_stack" = x && { as_lineno=; unset as_lineno;}
+
+} # ac_fn_c_check_type
+
+# ac_fn_c_check_func LINENO FUNC VAR
+# ----------------------------------
+# Tests whether FUNC exists, setting the cache variable VAR accordingly
+ac_fn_c_check_func ()
+{
+  as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack
+  { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $2" >&5
+$as_echo_n "checking for $2... " >&6; }
+if { as_var=$3; eval "test \"\${$as_var+set}\" = set"; }; then :
+  $as_echo_n "(cached) " >&6
+else
+  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+/* Define $2 to an innocuous variant, in case <limits.h> declares $2.
+   For example, HP-UX 11i <limits.h> declares gettimeofday.  */
+#define $2 innocuous_$2
+
+/* System header to define __stub macros and hopefully few prototypes,
+    which can conflict with char $2 (); below.
+    Prefer <limits.h> to <assert.h> if __STDC__ is defined, since
+    <limits.h> exists even on freestanding compilers.  */
+
+#ifdef __STDC__
+# include <limits.h>
+#else
+# include <assert.h>
+#endif
+
+#undef $2
+
+/* Override any GCC internal prototype to avoid an error.
+   Use char because int might match the return type of a GCC
+   builtin and then its argument prototype would still apply.  */
+#ifdef __cplusplus
+extern "C"
+#endif
+char $2 ();
+/* The GNU C library defines this for functions which it implements
+    to always fail with ENOSYS.  Some functions are actually named
+    something starting with __ and the normal name is an alias.  */
+#if defined __stub_$2 || defined __stub___$2
+choke me
+#endif
+
+int
+main ()
+{
+return $2 ();
+  ;
+  return 0;
+}
+_ACEOF
+if ac_fn_c_try_link "$LINENO"; then :
+  eval "$3=yes"
+else
+  eval "$3=no"
+fi
+rm -f core conftest.err conftest.$ac_objext \
+    conftest$ac_exeext conftest.$ac_ext
+fi
+eval ac_res=\$$3
+	       { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_res" >&5
+$as_echo "$ac_res" >&6; }
+  eval $as_lineno_stack; test "x$as_lineno_stack" = x && { as_lineno=; unset as_lineno;}
+
+} # ac_fn_c_check_func
+cat >config.log <<_ACEOF
 This file contains any messages produced by compilers while
 running configure, to aid debugging if configure makes a mistake.
 
 It was created by $as_me, which was
-generated by GNU Autoconf 2.59.  Invocation command line was
+generated by GNU Autoconf 2.64.  Invocation command line was
 
   $ $0 $@
 
 _ACEOF
+exec 5>>config.log
 {
 cat <<_ASUNAME
 ## --------- ##
@@ -1036,7 +2052,7 @@ uname -v = `(uname -v) 2>/dev/null || echo unknown`
 /bin/arch              = `(/bin/arch) 2>/dev/null              || echo unknown`
 /usr/bin/arch -k       = `(/usr/bin/arch -k) 2>/dev/null       || echo unknown`
 /usr/convex/getsysinfo = `(/usr/convex/getsysinfo) 2>/dev/null || echo unknown`
-hostinfo               = `(hostinfo) 2>/dev/null               || echo unknown`
+/usr/bin/hostinfo      = `(/usr/bin/hostinfo) 2>/dev/null      || echo unknown`
 /bin/machine           = `(/bin/machine) 2>/dev/null           || echo unknown`
 /usr/bin/oslevel       = `(/usr/bin/oslevel) 2>/dev/null       || echo unknown`
 /bin/universe          = `(/bin/universe) 2>/dev/null          || echo unknown`
@@ -1048,8 +2064,9 @@ for as_dir in $PATH
 do
   IFS=$as_save_IFS
   test -z "$as_dir" && as_dir=.
-  echo "PATH: $as_dir"
-done
+    $as_echo "PATH: $as_dir"
+  done
+IFS=$as_save_IFS
 
 } >&5
 
@@ -1071,7 +2088,6 @@ _ACEOF
 ac_configure_args=
 ac_configure_args0=
 ac_configure_args1=
-ac_sep=
 ac_must_keep_next=false
 for ac_pass in 1 2
 do
@@ -1082,13 +2098,13 @@ do
     -q | -quiet | --quiet | --quie | --qui | --qu | --q \
     | -silent | --silent | --silen | --sile | --sil)
       continue ;;
-    *" "*|*"	"*|*[\[\]\~\#\$\^\&\*\(\)\{\}\\\|\;\<\>\?\"\']*)
-      ac_arg=`echo "$ac_arg" | sed "s/'/'\\\\\\\\''/g"` ;;
+    *\'*)
+      ac_arg=`$as_echo "$ac_arg" | sed "s/'/'\\\\\\\\''/g"` ;;
     esac
     case $ac_pass in
-    1) ac_configure_args0="$ac_configure_args0 '$ac_arg'" ;;
+    1) as_fn_append ac_configure_args0 " '$ac_arg'" ;;
     2)
-      ac_configure_args1="$ac_configure_args1 '$ac_arg'"
+      as_fn_append ac_configure_args1 " '$ac_arg'"
       if test $ac_must_keep_next = true; then
 	ac_must_keep_next=false # Got value, back to normal.
       else
@@ -1104,21 +2120,19 @@ do
 	  -* ) ac_must_keep_next=true ;;
 	esac
       fi
-      ac_configure_args="$ac_configure_args$ac_sep'$ac_arg'"
-      # Get rid of the leading space.
-      ac_sep=" "
+      as_fn_append ac_configure_args " '$ac_arg'"
       ;;
     esac
   done
 done
-$as_unset ac_configure_args0 || test "${ac_configure_args0+set}" != set || { ac_configure_args0=; export ac_configure_args0; }
-$as_unset ac_configure_args1 || test "${ac_configure_args1+set}" != set || { ac_configure_args1=; export ac_configure_args1; }
+{ ac_configure_args0=; unset ac_configure_args0;}
+{ ac_configure_args1=; unset ac_configure_args1;}
 
 # When interrupted or exit'd, cleanup temporary files, and complete
 # config.log.  We remove comments because anyway the quotes in there
 # would cause problems or look ugly.
-# WARNING: Be sure not to use single quotes in there, as some shells,
-# such as our DU 5.0 friend, will then `close' the trap.
+# WARNING: Use '\'' to represent an apostrophe within the trap.
+# WARNING: Do not start the trap code with a newline, due to a FreeBSD 4.0 bug.
 trap 'exit_status=$?
   # Save into config.log some information that might help in debugging.
   {
@@ -1131,20 +2145,35 @@ trap 'exit_status=$?
 _ASBOX
     echo
     # The following way of writing the cache mishandles newlines in values,
-{
+(
+  for ac_var in `(set) 2>&1 | sed -n '\''s/^\([a-zA-Z_][a-zA-Z0-9_]*\)=.*/\1/p'\''`; do
+    eval ac_val=\$$ac_var
+    case $ac_val in #(
+    *${as_nl}*)
+      case $ac_var in #(
+      *_cv_*) { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: cache variable $ac_var contains a newline" >&5
+$as_echo "$as_me: WARNING: cache variable $ac_var contains a newline" >&2;} ;;
+      esac
+      case $ac_var in #(
+      _ | IFS | as_nl) ;; #(
+      BASH_ARGV | BASH_SOURCE) eval $ac_var= ;; #(
+      *) { eval $ac_var=; unset $ac_var;} ;;
+      esac ;;
+    esac
+  done
   (set) 2>&1 |
-    case `(ac_space='"'"' '"'"'; set | grep ac_space) 2>&1` in
-    *ac_space=\ *)
+    case $as_nl`(ac_space='\'' '\''; set) 2>&1` in #(
+    *${as_nl}ac_space=\ *)
       sed -n \
-	"s/'"'"'/'"'"'\\\\'"'"''"'"'/g;
-	  s/^\\([_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\\)=\\(.*\\)/\\1='"'"'\\2'"'"'/p"
-      ;;
+	"s/'\''/'\''\\\\'\'''\''/g;
+	  s/^\\([_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\\)=\\(.*\\)/\\1='\''\\2'\''/p"
+      ;; #(
     *)
-      sed -n \
-	"s/^\\([_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\\)=\\(.*\\)/\\1=\\2/p"
+      sed -n "/^[_$as_cr_alnum]*_cv_[_$as_cr_alnum]*=/p"
       ;;
-    esac;
-}
+    esac |
+    sort
+)
     echo
 
     cat <<\_ASBOX
@@ -1155,22 +2184,28 @@ _ASBOX
     echo
     for ac_var in $ac_subst_vars
     do
-      eval ac_val=$`echo $ac_var`
-      echo "$ac_var='"'"'$ac_val'"'"'"
+      eval ac_val=\$$ac_var
+      case $ac_val in
+      *\'\''*) ac_val=`$as_echo "$ac_val" | sed "s/'\''/'\''\\\\\\\\'\'''\''/g"`;;
+      esac
+      $as_echo "$ac_var='\''$ac_val'\''"
     done | sort
     echo
 
     if test -n "$ac_subst_files"; then
       cat <<\_ASBOX
-## ------------- ##
-## Output files. ##
-## ------------- ##
+## ------------------- ##
+## File substitutions. ##
+## ------------------- ##
 _ASBOX
       echo
       for ac_var in $ac_subst_files
       do
-	eval ac_val=$`echo $ac_var`
-	echo "$ac_var='"'"'$ac_val'"'"'"
+	eval ac_val=\$$ac_var
+	case $ac_val in
+	*\'\''*) ac_val=`$as_echo "$ac_val" | sed "s/'\''/'\''\\\\\\\\'\'''\''/g"`;;
+	esac
+	$as_echo "$ac_var='\''$ac_val'\''"
       done | sort
       echo
     fi
@@ -1182,26 +2217,26 @@ _ASBOX
 ## ----------- ##
 _ASBOX
       echo
-      sed "/^$/d" confdefs.h | sort
+      cat confdefs.h
       echo
     fi
     test "$ac_signal" != 0 &&
-      echo "$as_me: caught signal $ac_signal"
-    echo "$as_me: exit $exit_status"
+      $as_echo "$as_me: caught signal $ac_signal"
+    $as_echo "$as_me: exit $exit_status"
   } >&5
-  rm -f core *.core &&
-  rm -rf conftest* confdefs* conf$$* $ac_clean_files &&
+  rm -f core *.core core.conftest.* &&
+    rm -f -r conftest* confdefs* conf$$* $ac_clean_files &&
     exit $exit_status
-     ' 0
+' 0
 for ac_signal in 1 2 13 15; do
-  trap 'ac_signal='$ac_signal'; { (exit 1); exit 1; }' $ac_signal
+  trap 'ac_signal='$ac_signal'; as_fn_exit 1' $ac_signal
 done
 ac_signal=0
 
 # confdefs.h avoids OS command line length limits that DEFS can exceed.
-rm -rf conftest* confdefs.h
-# AIX cpp loses on an empty file, so make sure it contains at least a newline.
-echo >confdefs.h
+rm -f -r conftest* confdefs.h
+
+$as_echo "/* confdefs.h */" > confdefs.h
 
 # Predefined preprocessor variables.
 
@@ -1209,40 +2244,46 @@ cat >>confdefs.h <<_ACEOF
 #define PACKAGE_NAME "$PACKAGE_NAME"
 _ACEOF
 
-
 cat >>confdefs.h <<_ACEOF
 #define PACKAGE_TARNAME "$PACKAGE_TARNAME"
 _ACEOF
 
-
 cat >>confdefs.h <<_ACEOF
 #define PACKAGE_VERSION "$PACKAGE_VERSION"
 _ACEOF
 
-
 cat >>confdefs.h <<_ACEOF
 #define PACKAGE_STRING "$PACKAGE_STRING"
 _ACEOF
 
-
 cat >>confdefs.h <<_ACEOF
 #define PACKAGE_BUGREPORT "$PACKAGE_BUGREPORT"
 _ACEOF
 
+cat >>confdefs.h <<_ACEOF
+#define PACKAGE_URL "$PACKAGE_URL"
+_ACEOF
+
 
 # Let the site file select an alternate cache file if it wants to.
-# Prefer explicitly selected file to automatically selected ones.
-if test -z "$CONFIG_SITE"; then
-  if test "x$prefix" != xNONE; then
-    CONFIG_SITE="$prefix/share/config.site $prefix/etc/config.site"
-  else
-    CONFIG_SITE="$ac_default_prefix/share/config.site $ac_default_prefix/etc/config.site"
-  fi
-fi
-for ac_site_file in $CONFIG_SITE; do
+# Prefer an explicitly selected file to automatically selected ones.
+ac_site_file1=NONE
+ac_site_file2=NONE
+if test -n "$CONFIG_SITE"; then
+  ac_site_file1=$CONFIG_SITE
+elif test "x$prefix" != xNONE; then
+  ac_site_file1=$prefix/share/config.site
+  ac_site_file2=$prefix/etc/config.site
+else
+  ac_site_file1=$ac_default_prefix/share/config.site
+  ac_site_file2=$ac_default_prefix/etc/config.site
+fi
+for ac_site_file in "$ac_site_file1" "$ac_site_file2"
+do
+  test "x$ac_site_file" = xNONE && continue
   if test -r "$ac_site_file"; then
-    { echo "$as_me:$LINENO: loading site script $ac_site_file" >&5
-echo "$as_me: loading site script $ac_site_file" >&6;}
+    { $as_echo "$as_me:${as_lineno-$LINENO}: loading site script $ac_site_file" >&5
+$as_echo "$as_me: loading site script $ac_site_file" >&6;}
     sed 's/^/| /' "$ac_site_file" >&5
     . "$ac_site_file"
   fi
@@ -1252,80 +2293,79 @@ if test -r "$cache_file"; then
   # Some versions of bash will fail to source /dev/null (special
   # files actually), so we avoid doing that.
   if test -f "$cache_file"; then
-    { echo "$as_me:$LINENO: loading cache $cache_file" >&5
-echo "$as_me: loading cache $cache_file" >&6;}
+    { $as_echo "$as_me:${as_lineno-$LINENO}: loading cache $cache_file" >&5
+$as_echo "$as_me: loading cache $cache_file" >&6;}
     case $cache_file in
-      [\\/]* | ?:[\\/]* ) . $cache_file;;
-      *)                      . ./$cache_file;;
+      [\\/]* | ?:[\\/]* ) . "$cache_file";;
+      *)                      . "./$cache_file";;
     esac
   fi
 else
-  { echo "$as_me:$LINENO: creating cache $cache_file" >&5
-echo "$as_me: creating cache $cache_file" >&6;}
+  { $as_echo "$as_me:${as_lineno-$LINENO}: creating cache $cache_file" >&5
+$as_echo "$as_me: creating cache $cache_file" >&6;}
   >$cache_file
 fi
 
 # Check that the precious variables saved in the cache have kept the same
 # value.
 ac_cache_corrupted=false
-for ac_var in `(set) 2>&1 |
-	       sed -n 's/^ac_env_\([a-zA-Z_0-9]*\)_set=.*/\1/p'`; do
+for ac_var in $ac_precious_vars; do
   eval ac_old_set=\$ac_cv_env_${ac_var}_set
   eval ac_new_set=\$ac_env_${ac_var}_set
-  eval ac_old_val="\$ac_cv_env_${ac_var}_value"
-  eval ac_new_val="\$ac_env_${ac_var}_value"
+  eval ac_old_val=\$ac_cv_env_${ac_var}_value
+  eval ac_new_val=\$ac_env_${ac_var}_value
   case $ac_old_set,$ac_new_set in
     set,)
-      { echo "$as_me:$LINENO: error: \`$ac_var' was set to \`$ac_old_val' in the previous run" >&5
-echo "$as_me: error: \`$ac_var' was set to \`$ac_old_val' in the previous run" >&2;}
+      { $as_echo "$as_me:${as_lineno-$LINENO}: error: \`$ac_var' was set to \`$ac_old_val' in the previous run" >&5
+$as_echo "$as_me: error: \`$ac_var' was set to \`$ac_old_val' in the previous run" >&2;}
       ac_cache_corrupted=: ;;
     ,set)
-      { echo "$as_me:$LINENO: error: \`$ac_var' was not set in the previous run" >&5
-echo "$as_me: error: \`$ac_var' was not set in the previous run" >&2;}
+      { $as_echo "$as_me:${as_lineno-$LINENO}: error: \`$ac_var' was not set in the previous run" >&5
+$as_echo "$as_me: error: \`$ac_var' was not set in the previous run" >&2;}
       ac_cache_corrupted=: ;;
     ,);;
     *)
       if test "x$ac_old_val" != "x$ac_new_val"; then
-        # differences in whitespace do not lead to failure.
-        ac_old_val_w=`echo x $ac_old_val`
-        ac_new_val_w=`echo x $ac_new_val`
-        if test "$ac_old_val_w" != "$ac_new_val_w"; then
-          { echo "$as_me:$LINENO: error: \`$ac_var' has changed since the previous run:" >&5
-echo "$as_me: error: \`$ac_var' has changed since the previous run:" >&2;}
-          ac_cache_corrupted=:
-        else
-          { echo "$as_me:$LINENO: warning: ignoring whitespace changes in \`$ac_var' since the previous run:" >&5
-echo "$as_me: warning: ignoring whitespace changes in \`$ac_var' since the previous run:" >&2;}
-          eval $ac_var=\$ac_old_val
-        fi
-        { echo "$as_me:$LINENO:   former value:  \`$ac_old_val'" >&5
-echo "$as_me:   former value:  \`$ac_old_val'" >&2;}
-        { echo "$as_me:$LINENO:   current value: \`$ac_new_val'" >&5
-echo "$as_me:   current value: \`$ac_new_val'" >&2;}
+	# differences in whitespace do not lead to failure.
+	ac_old_val_w=`echo x $ac_old_val`
+	ac_new_val_w=`echo x $ac_new_val`
+	if test "$ac_old_val_w" != "$ac_new_val_w"; then
+	  { $as_echo "$as_me:${as_lineno-$LINENO}: error: \`$ac_var' has changed since the previous run:" >&5
+$as_echo "$as_me: error: \`$ac_var' has changed since the previous run:" >&2;}
+	  ac_cache_corrupted=:
+	else
+	  { $as_echo "$as_me:${as_lineno-$LINENO}: warning: ignoring whitespace changes in \`$ac_var' since the previous run:" >&5
+$as_echo "$as_me: warning: ignoring whitespace changes in \`$ac_var' since the previous run:" >&2;}
+	  eval $ac_var=\$ac_old_val
+	fi
+	{ $as_echo "$as_me:${as_lineno-$LINENO}:   former value:  \`$ac_old_val'" >&5
+$as_echo "$as_me:   former value:  \`$ac_old_val'" >&2;}
+	{ $as_echo "$as_me:${as_lineno-$LINENO}:   current value: \`$ac_new_val'" >&5
+$as_echo "$as_me:   current value: \`$ac_new_val'" >&2;}
       fi;;
   esac
   # Pass precious variables to config.status.
   if test "$ac_new_set" = set; then
     case $ac_new_val in
-    *" "*|*"	"*|*[\[\]\~\#\$\^\&\*\(\)\{\}\\\|\;\<\>\?\"\']*)
-      ac_arg=$ac_var=`echo "$ac_new_val" | sed "s/'/'\\\\\\\\''/g"` ;;
+    *\'*) ac_arg=$ac_var=`$as_echo "$ac_new_val" | sed "s/'/'\\\\\\\\''/g"` ;;
     *) ac_arg=$ac_var=$ac_new_val ;;
     esac
     case " $ac_configure_args " in
       *" '$ac_arg' "*) ;; # Avoid dups.  Use of quotes ensures accuracy.
-      *) ac_configure_args="$ac_configure_args '$ac_arg'" ;;
+      *) as_fn_append ac_configure_args " '$ac_arg'" ;;
     esac
   fi
 done
 if $ac_cache_corrupted; then
-  { echo "$as_me:$LINENO: error: in \`$ac_pwd':" >&5
-echo "$as_me: error: in \`$ac_pwd':" >&2;}
-  { echo "$as_me:$LINENO: error: changes in the environment can compromise the build" >&5
-echo "$as_me: error: changes in the environment can compromise the build" >&2;}
-  { { echo "$as_me:$LINENO: error: run \`make distclean' and/or \`rm $cache_file' and start over" >&5
-echo "$as_me: error: run \`make distclean' and/or \`rm $cache_file' and start over" >&2;}
-   { (exit 1); exit 1; }; }
+  { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5
+$as_echo "$as_me: error: in \`$ac_pwd':" >&2;}
+  { $as_echo "$as_me:${as_lineno-$LINENO}: error: changes in the environment can compromise the build" >&5
+$as_echo "$as_me: error: changes in the environment can compromise the build" >&2;}
+  as_fn_error "run \`make distclean' and/or \`rm $cache_file' and start over" "$LINENO" 5
 fi
+## -------------------- ##
+## Main body of script. ##
+## -------------------- ##
 
 ac_ext=c
 ac_cpp='$CPP $CPPFLAGS'
@@ -1338,47 +2378,28 @@ ac_compiler_gnu=$ac_cv_c_compiler_gnu
 
 
 
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
 ac_aux_dir=
-for ac_dir in $srcdir $srcdir/.. $srcdir/../..; do
-  if test -f $ac_dir/install-sh; then
-    ac_aux_dir=$ac_dir
-    ac_install_sh="$ac_aux_dir/install-sh -c"
-    break
-  elif test -f $ac_dir/install.sh; then
-    ac_aux_dir=$ac_dir
-    ac_install_sh="$ac_aux_dir/install.sh -c"
-    break
-  elif test -f $ac_dir/shtool; then
-    ac_aux_dir=$ac_dir
-    ac_install_sh="$ac_aux_dir/shtool install -c"
-    break
-  fi
+for ac_dir in "$srcdir" "$srcdir/.." "$srcdir/../.."; do
+  for ac_t in install-sh install.sh shtool; do
+    if test -f "$ac_dir/$ac_t"; then
+      ac_aux_dir=$ac_dir
+      ac_install_sh="$ac_aux_dir/$ac_t -c"
+      break 2
+    fi
+  done
 done
 if test -z "$ac_aux_dir"; then
-  { { echo "$as_me:$LINENO: error: cannot find install-sh or install.sh in $srcdir $srcdir/.. $srcdir/../.." >&5
-echo "$as_me: error: cannot find install-sh or install.sh in $srcdir $srcdir/.. $srcdir/../.." >&2;}
-   { (exit 1); exit 1; }; }
+  as_fn_error "cannot find install-sh, install.sh, or shtool in \"$srcdir\" \"$srcdir/..\" \"$srcdir/../..\"" "$LINENO" 5
 fi
-ac_config_guess="$SHELL $ac_aux_dir/config.guess"
-ac_config_sub="$SHELL $ac_aux_dir/config.sub"
-ac_configure="$SHELL $ac_aux_dir/configure" # This should be Cygnus configure.
+
+# These three variables are undocumented and unsupported,
+# and are intended to be withdrawn in a future Autoconf release.
+# They can cause serious problems if a builder's source tree is in a directory
+# whose full name contains unusual characters.
+ac_config_guess="$SHELL $ac_aux_dir/config.guess"  # Please don't use this var.
+ac_config_sub="$SHELL $ac_aux_dir/config.sub"  # Please don't use this var.
+ac_configure="$SHELL $ac_aux_dir/configure"  # Please don't use this var.
+
 
 # Find a good install program.  We prefer a C program (faster),
 # so one script is as good as another.  But avoid the broken or
@@ -1393,22 +2414,23 @@ ac_configure="$SHELL $ac_aux_dir/configure" # This should be Cygnus configure.
 # SVR4 /usr/ucb/install, which tries to use the nonexistent group "staff"
 # OS/2's system install, which has a completely different semantic
 # ./install, which can be erroneously created by make from ./install.sh.
-echo "$as_me:$LINENO: checking for a BSD-compatible install" >&5
-echo $ECHO_N "checking for a BSD-compatible install... $ECHO_C" >&6
+# Reject install programs that cannot install multiple files.
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for a BSD-compatible install" >&5
+$as_echo_n "checking for a BSD-compatible install... " >&6; }
 if test -z "$INSTALL"; then
-if test "${ac_cv_path_install+set}" = set; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
+if test "${ac_cv_path_install+set}" = set; then :
+  $as_echo_n "(cached) " >&6
 else
   as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
 for as_dir in $PATH
 do
   IFS=$as_save_IFS
   test -z "$as_dir" && as_dir=.
-  # Account for people who put trailing slashes in PATH elements.
-case $as_dir/ in
-  ./ | .// | /cC/* | \
+    # Account for people who put trailing slashes in PATH elements.
+case $as_dir/ in #((
+  ./ | .// | /[cC]/* | \
   /etc/* | /usr/sbin/* | /usr/etc/* | /sbin/* | /usr/afsws/bin/* | \
-  ?:\\/os2\\/install\\/* | ?:\\/OS2\\/INSTALL\\/* | \
+  ?:[\\/]os2[\\/]install[\\/]* | ?:[\\/]OS2[\\/]INSTALL[\\/]* | \
   /usr/ucb/* ) ;;
   *)
     # OSF1 and SCO ODT 3.0 have their own names for install.
@@ -1416,7 +2438,7 @@ case $as_dir/ in
     # by default.
     for ac_prog in ginstall scoinst install; do
       for ac_exec_ext in '' $ac_executable_extensions; do
-	if $as_executable_p "$as_dir/$ac_prog$ac_exec_ext"; then
+	if { test -f "$as_dir/$ac_prog$ac_exec_ext" && $as_test_x "$as_dir/$ac_prog$ac_exec_ext"; }; then
 	  if test $ac_prog = install &&
 	    grep dspmsg "$as_dir/$ac_prog$ac_exec_ext" >/dev/null 2>&1; then
 	    # AIX install.  It has an incompatible calling convention.
@@ -1426,30 +2448,43 @@ case $as_dir/ in
 	    # program-specific install script used by HP pwplus--don't use.
 	    :
 	  else
-	    ac_cv_path_install="$as_dir/$ac_prog$ac_exec_ext -c"
-	    break 3
+	    rm -rf conftest.one conftest.two conftest.dir
+	    echo one > conftest.one
+	    echo two > conftest.two
+	    mkdir conftest.dir
+	    if "$as_dir/$ac_prog$ac_exec_ext" -c conftest.one conftest.two "`pwd`/conftest.dir" &&
+	      test -s conftest.one && test -s conftest.two &&
+	      test -s conftest.dir/conftest.one &&
+	      test -s conftest.dir/conftest.two
+	    then
+	      ac_cv_path_install="$as_dir/$ac_prog$ac_exec_ext -c"
+	      break 3
+	    fi
 	  fi
 	fi
       done
     done
     ;;
 esac
-done
 
+  done
+IFS=$as_save_IFS
+
+rm -rf conftest.one conftest.two conftest.dir
 
 fi
   if test "${ac_cv_path_install+set}" = set; then
     INSTALL=$ac_cv_path_install
   else
-    # As a last resort, use the slow shell script.  We don't cache a
-    # path for INSTALL within a source directory, because that will
+    # As a last resort, use the slow shell script.  Don't cache a
+    # value for INSTALL within a source directory, because that will
     # break other packages using the cache if that directory is
-    # removed, or if the path is relative.
+    # removed, or if the value is a relative name.
     INSTALL=$ac_install_sh
   fi
 fi
-echo "$as_me:$LINENO: result: $INSTALL" >&5
-echo "${ECHO_T}$INSTALL" >&6
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $INSTALL" >&5
+$as_echo "$INSTALL" >&6; }
 
 # Use test -z because SunOS4 sh mishandles braces in ${var-val}.
 # It thinks the first close brace ends the variable substitution.
@@ -1467,10 +2502,10 @@ ac_compiler_gnu=$ac_cv_c_compiler_gnu
 if test -n "$ac_tool_prefix"; then
   # Extract the first word of "${ac_tool_prefix}gcc", so it can be a program name with args.
 set dummy ${ac_tool_prefix}gcc; ac_word=$2
-echo "$as_me:$LINENO: checking for $ac_word" >&5
-echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
-if test "${ac_cv_prog_CC+set}" = set; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if test "${ac_cv_prog_CC+set}" = set; then :
+  $as_echo_n "(cached) " >&6
 else
   if test -n "$CC"; then
   ac_cv_prog_CC="$CC" # Let the user override the test.
@@ -1480,35 +2515,37 @@ for as_dir in $PATH
 do
   IFS=$as_save_IFS
   test -z "$as_dir" && as_dir=.
-  for ac_exec_ext in '' $ac_executable_extensions; do
-  if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+    for ac_exec_ext in '' $ac_executable_extensions; do
+  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
     ac_cv_prog_CC="${ac_tool_prefix}gcc"
-    echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
+    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
     break 2
   fi
 done
-done
+  done
+IFS=$as_save_IFS
 
 fi
 fi
 CC=$ac_cv_prog_CC
 if test -n "$CC"; then
-  echo "$as_me:$LINENO: result: $CC" >&5
-echo "${ECHO_T}$CC" >&6
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $CC" >&5
+$as_echo "$CC" >&6; }
 else
-  echo "$as_me:$LINENO: result: no" >&5
-echo "${ECHO_T}no" >&6
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
 fi
 
+
 fi
 if test -z "$ac_cv_prog_CC"; then
   ac_ct_CC=$CC
   # Extract the first word of "gcc", so it can be a program name with args.
 set dummy gcc; ac_word=$2
-echo "$as_me:$LINENO: checking for $ac_word" >&5
-echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
-if test "${ac_cv_prog_ac_ct_CC+set}" = set; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if test "${ac_cv_prog_ac_ct_CC+set}" = set; then :
+  $as_echo_n "(cached) " >&6
 else
   if test -n "$ac_ct_CC"; then
   ac_cv_prog_ac_ct_CC="$ac_ct_CC" # Let the user override the test.
@@ -1518,39 +2555,50 @@ for as_dir in $PATH
 do
   IFS=$as_save_IFS
   test -z "$as_dir" && as_dir=.
-  for ac_exec_ext in '' $ac_executable_extensions; do
-  if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+    for ac_exec_ext in '' $ac_executable_extensions; do
+  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
     ac_cv_prog_ac_ct_CC="gcc"
-    echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
+    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
     break 2
   fi
 done
-done
+  done
+IFS=$as_save_IFS
 
 fi
 fi
 ac_ct_CC=$ac_cv_prog_ac_ct_CC
 if test -n "$ac_ct_CC"; then
-  echo "$as_me:$LINENO: result: $ac_ct_CC" >&5
-echo "${ECHO_T}$ac_ct_CC" >&6
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_CC" >&5
+$as_echo "$ac_ct_CC" >&6; }
 else
-  echo "$as_me:$LINENO: result: no" >&5
-echo "${ECHO_T}no" >&6
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
 fi
 
-  CC=$ac_ct_CC
+  if test "x$ac_ct_CC" = x; then
+    CC=""
+  else
+    case $cross_compiling:$ac_tool_warned in
+yes:)
+{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5
+$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
+ac_tool_warned=yes ;;
+esac
+    CC=$ac_ct_CC
+  fi
 else
   CC="$ac_cv_prog_CC"
 fi
 
 if test -z "$CC"; then
-  if test -n "$ac_tool_prefix"; then
-  # Extract the first word of "${ac_tool_prefix}cc", so it can be a program name with args.
+          if test -n "$ac_tool_prefix"; then
+    # Extract the first word of "${ac_tool_prefix}cc", so it can be a program name with args.
 set dummy ${ac_tool_prefix}cc; ac_word=$2
-echo "$as_me:$LINENO: checking for $ac_word" >&5
-echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
-if test "${ac_cv_prog_CC+set}" = set; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if test "${ac_cv_prog_CC+set}" = set; then :
+  $as_echo_n "(cached) " >&6
 else
   if test -n "$CC"; then
   ac_cv_prog_CC="$CC" # Let the user override the test.
@@ -1560,77 +2608,37 @@ for as_dir in $PATH
 do
   IFS=$as_save_IFS
   test -z "$as_dir" && as_dir=.
-  for ac_exec_ext in '' $ac_executable_extensions; do
-  if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+    for ac_exec_ext in '' $ac_executable_extensions; do
+  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
     ac_cv_prog_CC="${ac_tool_prefix}cc"
-    echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
+    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
     break 2
   fi
 done
-done
+  done
+IFS=$as_save_IFS
 
 fi
 fi
 CC=$ac_cv_prog_CC
 if test -n "$CC"; then
-  echo "$as_me:$LINENO: result: $CC" >&5
-echo "${ECHO_T}$CC" >&6
-else
-  echo "$as_me:$LINENO: result: no" >&5
-echo "${ECHO_T}no" >&6
-fi
-
-fi
-if test -z "$ac_cv_prog_CC"; then
-  ac_ct_CC=$CC
-  # Extract the first word of "cc", so it can be a program name with args.
-set dummy cc; ac_word=$2
-echo "$as_me:$LINENO: checking for $ac_word" >&5
-echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
-if test "${ac_cv_prog_ac_ct_CC+set}" = set; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
-else
-  if test -n "$ac_ct_CC"; then
-  ac_cv_prog_ac_ct_CC="$ac_ct_CC" # Let the user override the test.
-else
-as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
-  IFS=$as_save_IFS
-  test -z "$as_dir" && as_dir=.
-  for ac_exec_ext in '' $ac_executable_extensions; do
-  if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
-    ac_cv_prog_ac_ct_CC="cc"
-    echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
-    break 2
-  fi
-done
-done
-
-fi
-fi
-ac_ct_CC=$ac_cv_prog_ac_ct_CC
-if test -n "$ac_ct_CC"; then
-  echo "$as_me:$LINENO: result: $ac_ct_CC" >&5
-echo "${ECHO_T}$ac_ct_CC" >&6
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $CC" >&5
+$as_echo "$CC" >&6; }
 else
-  echo "$as_me:$LINENO: result: no" >&5
-echo "${ECHO_T}no" >&6
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
 fi
 
-  CC=$ac_ct_CC
-else
-  CC="$ac_cv_prog_CC"
-fi
 
+  fi
 fi
 if test -z "$CC"; then
   # Extract the first word of "cc", so it can be a program name with args.
 set dummy cc; ac_word=$2
-echo "$as_me:$LINENO: checking for $ac_word" >&5
-echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
-if test "${ac_cv_prog_CC+set}" = set; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if test "${ac_cv_prog_CC+set}" = set; then :
+  $as_echo_n "(cached) " >&6
 else
   if test -n "$CC"; then
   ac_cv_prog_CC="$CC" # Let the user override the test.
@@ -1641,18 +2649,19 @@ for as_dir in $PATH
 do
   IFS=$as_save_IFS
   test -z "$as_dir" && as_dir=.
-  for ac_exec_ext in '' $ac_executable_extensions; do
-  if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+    for ac_exec_ext in '' $ac_executable_extensions; do
+  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
     if test "$as_dir/$ac_word$ac_exec_ext" = "/usr/ucb/cc"; then
        ac_prog_rejected=yes
        continue
      fi
     ac_cv_prog_CC="cc"
-    echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
+    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
     break 2
   fi
 done
-done
+  done
+IFS=$as_save_IFS
 
 if test $ac_prog_rejected = yes; then
   # We found a bogon in the path, so make sure we never use it.
@@ -1670,24 +2679,25 @@ fi
 fi
 CC=$ac_cv_prog_CC
 if test -n "$CC"; then
-  echo "$as_me:$LINENO: result: $CC" >&5
-echo "${ECHO_T}$CC" >&6
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $CC" >&5
+$as_echo "$CC" >&6; }
 else
-  echo "$as_me:$LINENO: result: no" >&5
-echo "${ECHO_T}no" >&6
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
 fi
 
+
 fi
 if test -z "$CC"; then
   if test -n "$ac_tool_prefix"; then
-  for ac_prog in cl
+  for ac_prog in cl.exe
   do
     # Extract the first word of "$ac_tool_prefix$ac_prog", so it can be a program name with args.
 set dummy $ac_tool_prefix$ac_prog; ac_word=$2
-echo "$as_me:$LINENO: checking for $ac_word" >&5
-echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
-if test "${ac_cv_prog_CC+set}" = set; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if test "${ac_cv_prog_CC+set}" = set; then :
+  $as_echo_n "(cached) " >&6
 else
   if test -n "$CC"; then
   ac_cv_prog_CC="$CC" # Let the user override the test.
@@ -1697,39 +2707,41 @@ for as_dir in $PATH
 do
   IFS=$as_save_IFS
   test -z "$as_dir" && as_dir=.
-  for ac_exec_ext in '' $ac_executable_extensions; do
-  if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+    for ac_exec_ext in '' $ac_executable_extensions; do
+  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
     ac_cv_prog_CC="$ac_tool_prefix$ac_prog"
-    echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
+    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
     break 2
   fi
 done
-done
+  done
+IFS=$as_save_IFS
 
 fi
 fi
 CC=$ac_cv_prog_CC
 if test -n "$CC"; then
-  echo "$as_me:$LINENO: result: $CC" >&5
-echo "${ECHO_T}$CC" >&6
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $CC" >&5
+$as_echo "$CC" >&6; }
 else
-  echo "$as_me:$LINENO: result: no" >&5
-echo "${ECHO_T}no" >&6
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
 fi
 
+
     test -n "$CC" && break
   done
 fi
 if test -z "$CC"; then
   ac_ct_CC=$CC
-  for ac_prog in cl
+  for ac_prog in cl.exe
 do
   # Extract the first word of "$ac_prog", so it can be a program name with args.
 set dummy $ac_prog; ac_word=$2
-echo "$as_me:$LINENO: checking for $ac_word" >&5
-echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
-if test "${ac_cv_prog_ac_ct_CC+set}" = set; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if test "${ac_cv_prog_ac_ct_CC+set}" = set; then :
+  $as_echo_n "(cached) " >&6
 else
   if test -n "$ac_ct_CC"; then
   ac_cv_prog_ac_ct_CC="$ac_ct_CC" # Let the user override the test.
@@ -1739,68 +2751,78 @@ for as_dir in $PATH
 do
   IFS=$as_save_IFS
   test -z "$as_dir" && as_dir=.
-  for ac_exec_ext in '' $ac_executable_extensions; do
-  if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+    for ac_exec_ext in '' $ac_executable_extensions; do
+  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
     ac_cv_prog_ac_ct_CC="$ac_prog"
-    echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
+    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
     break 2
   fi
 done
-done
+  done
+IFS=$as_save_IFS
 
 fi
 fi
 ac_ct_CC=$ac_cv_prog_ac_ct_CC
 if test -n "$ac_ct_CC"; then
-  echo "$as_me:$LINENO: result: $ac_ct_CC" >&5
-echo "${ECHO_T}$ac_ct_CC" >&6
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_CC" >&5
+$as_echo "$ac_ct_CC" >&6; }
 else
-  echo "$as_me:$LINENO: result: no" >&5
-echo "${ECHO_T}no" >&6
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
 fi
 
+
   test -n "$ac_ct_CC" && break
 done
 
-  CC=$ac_ct_CC
+  if test "x$ac_ct_CC" = x; then
+    CC=""
+  else
+    case $cross_compiling:$ac_tool_warned in
+yes:)
+{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5
+$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
+ac_tool_warned=yes ;;
+esac
+    CC=$ac_ct_CC
+  fi
 fi
 
 fi
 
 
-test -z "$CC" && { { echo "$as_me:$LINENO: error: in \`$ac_pwd':" >&5
-echo "$as_me: error: in \`$ac_pwd':" >&2;}
-{ { echo "$as_me:$LINENO: error: no acceptable C compiler found in \$PATH
-See \`config.log' for more details." >&5
-echo "$as_me: error: no acceptable C compiler found in \$PATH
-See \`config.log' for more details." >&2;}
-   { (exit 1); exit 1; }; }; }
+test -z "$CC" && { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5
+$as_echo "$as_me: error: in \`$ac_pwd':" >&2;}
+as_fn_error "no acceptable C compiler found in \$PATH
+See \`config.log' for more details." "$LINENO" 5; }
 
 # Provide some information about the compiler.
-echo "$as_me:$LINENO:" \
-     "checking for C compiler version" >&5
-ac_compiler=`set X $ac_compile; echo $2`
-{ (eval echo "$as_me:$LINENO: \"$ac_compiler --version </dev/null >&5\"") >&5
-  (eval $ac_compiler --version </dev/null >&5) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }
-{ (eval echo "$as_me:$LINENO: \"$ac_compiler -v </dev/null >&5\"") >&5
-  (eval $ac_compiler -v </dev/null >&5) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }
-{ (eval echo "$as_me:$LINENO: \"$ac_compiler -V </dev/null >&5\"") >&5
-  (eval $ac_compiler -V </dev/null >&5) 2>&5
+$as_echo "$as_me:${as_lineno-$LINENO}: checking for C compiler version" >&5
+set X $ac_compile
+ac_compiler=$2
+for ac_option in --version -v -V -qversion; do
+  { { ac_try="$ac_compiler $ac_option >&5"
+case "(($ac_try" in
+  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+  *) ac_try_echo=$ac_try;;
+esac
+eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\""
+$as_echo "$ac_try_echo"; } >&5
+  (eval "$ac_compiler $ac_option >&5") 2>conftest.err
   ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }
+  if test -s conftest.err; then
+    sed '10a\
+... rest of stderr output deleted ...
+         10q' conftest.err >conftest.er1
+    cat conftest.er1 >&5
+    rm -f conftest.er1 conftest.err
+  fi
+  $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+  test $ac_status = 0; }
+done
 
-cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h.  */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
+cat confdefs.h - <<_ACEOF >conftest.$ac_ext
 /* end confdefs.h.  */
 
 int
@@ -1812,116 +2834,142 @@ main ()
 }
 _ACEOF
 ac_clean_files_save=$ac_clean_files
-ac_clean_files="$ac_clean_files a.out a.exe b.out"
+ac_clean_files="$ac_clean_files a.out a.out.dSYM a.exe b.out conftest.out"
 # Try to create an executable without -o first, disregard a.out.
 # It will help us diagnose broken compilers, and finding out an intuition
 # of exeext.
-echo "$as_me:$LINENO: checking for C compiler default output file name" >&5
-echo $ECHO_N "checking for C compiler default output file name... $ECHO_C" >&6
-ac_link_default=`echo "$ac_link" | sed 's/ -o *conftest[^ ]*//'`
-if { (eval echo "$as_me:$LINENO: \"$ac_link_default\"") >&5
-  (eval $ac_link_default) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; then
-  # Find the output, starting from the most likely.  This scheme is
-# not robust to junk in `.', hence go to wildcards (a.*) only as a last
-# resort.
-
-# Be careful to initialize this variable, since it used to be cached.
-# Otherwise an old cache value of `no' led to `EXEEXT = no' in a Makefile.
-ac_cv_exeext=
-# b.out is created by i960 compilers.
-for ac_file in a_out.exe a.exe conftest.exe a.out conftest a.* conftest.* b.out
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for C compiler default output file name" >&5
+$as_echo_n "checking for C compiler default output file name... " >&6; }
+ac_link_default=`$as_echo "$ac_link" | sed 's/ -o *conftest[^ ]*//'`
+
+# The possible output files:
+ac_files="a.out conftest.exe conftest a.exe a_out.exe b.out conftest.*"
+
+ac_rmfiles=
+for ac_file in $ac_files
+do
+  case $ac_file in
+    *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.map | *.inf | *.dSYM | *.o | *.obj ) ;;
+    * ) ac_rmfiles="$ac_rmfiles $ac_file";;
+  esac
+done
+rm -f $ac_rmfiles
+
+if { { ac_try="$ac_link_default"
+case "(($ac_try" in
+  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+  *) ac_try_echo=$ac_try;;
+esac
+eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\""
+$as_echo "$ac_try_echo"; } >&5
+  (eval "$ac_link_default") 2>&5
+  ac_status=$?
+  $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+  test $ac_status = 0; }; then :
+  # Autoconf-2.13 could set the ac_cv_exeext variable to `no'.
+# So ignore a value of `no', otherwise this would lead to `EXEEXT = no'
+# in a Makefile.  We should not override ac_cv_exeext if it was cached,
+# so that the user can short-circuit this test for compilers unknown to
+# Autoconf.
+for ac_file in $ac_files ''
 do
   test -f "$ac_file" || continue
   case $ac_file in
-    *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.o | *.obj )
-	;;
-    conftest.$ac_ext )
-	# This is the source file.
+    *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.map | *.inf | *.dSYM | *.o | *.obj )
 	;;
     [ab].out )
 	# We found the default executable, but exeext='' is most
 	# certainly right.
 	break;;
     *.* )
-	ac_cv_exeext=`expr "$ac_file" : '[^.]*\(\..*\)'`
-	# FIXME: I believe we export ac_cv_exeext for Libtool,
-	# but it would be cool to find out if it's true.  Does anybody
-	# maintain Libtool? --akim.
-	export ac_cv_exeext
+	if test "${ac_cv_exeext+set}" = set && test "$ac_cv_exeext" != no;
+	then :; else
+	   ac_cv_exeext=`expr "$ac_file" : '[^.]*\(\..*\)'`
+	fi
+	# We set ac_cv_exeext here because the later test for it is not
+	# safe: cross compilers may not add the suffix if given an `-o'
+	# argument, so we may need to know it at that point already.
+	# Even if this section looks crufty: it has the advantage of
+	# actually working.
 	break;;
     * )
 	break;;
   esac
 done
+test "$ac_cv_exeext" = no && ac_cv_exeext=
+
 else
-  echo "$as_me: failed program was:" >&5
+  ac_file=''
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_file" >&5
+$as_echo "$ac_file" >&6; }
+if test -z "$ac_file"; then :
+  $as_echo "$as_me: failed program was:" >&5
 sed 's/^/| /' conftest.$ac_ext >&5
 
-{ { echo "$as_me:$LINENO: error: in \`$ac_pwd':" >&5
-echo "$as_me: error: in \`$ac_pwd':" >&2;}
-{ { echo "$as_me:$LINENO: error: C compiler cannot create executables
-See \`config.log' for more details." >&5
-echo "$as_me: error: C compiler cannot create executables
-See \`config.log' for more details." >&2;}
-   { (exit 77); exit 77; }; }; }
+{ { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5
+$as_echo "$as_me: error: in \`$ac_pwd':" >&2;}
+{ as_fn_set_status 77
+as_fn_error "C compiler cannot create executables
+See \`config.log' for more details." "$LINENO" 5; }; }
 fi
-
 ac_exeext=$ac_cv_exeext
-echo "$as_me:$LINENO: result: $ac_file" >&5
-echo "${ECHO_T}$ac_file" >&6
 
-# Check the compiler produces executables we can run.  If not, either
+# Check that the compiler produces executables we can run.  If not, either
 # the compiler is broken, or we cross compile.
-echo "$as_me:$LINENO: checking whether the C compiler works" >&5
-echo $ECHO_N "checking whether the C compiler works... $ECHO_C" >&6
-# FIXME: These cross compiler hacks should be removed for Autoconf 3.0
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether the C compiler works" >&5
+$as_echo_n "checking whether the C compiler works... " >&6; }
 # If not cross compiling, check that we can run a simple program.
 if test "$cross_compiling" != yes; then
   if { ac_try='./$ac_file'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
+  { { case "(($ac_try" in
+  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+  *) ac_try_echo=$ac_try;;
+esac
+eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\""
+$as_echo "$ac_try_echo"; } >&5
+  (eval "$ac_try") 2>&5
   ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; }; then
+  $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+  test $ac_status = 0; }; }; then
     cross_compiling=no
   else
     if test "$cross_compiling" = maybe; then
 	cross_compiling=yes
     else
-	{ { echo "$as_me:$LINENO: error: in \`$ac_pwd':" >&5
-echo "$as_me: error: in \`$ac_pwd':" >&2;}
-{ { echo "$as_me:$LINENO: error: cannot run C compiled programs.
+	{ { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5
+$as_echo "$as_me: error: in \`$ac_pwd':" >&2;}
+as_fn_error "cannot run C compiled programs.
 If you meant to cross compile, use \`--host'.
-See \`config.log' for more details." >&5
-echo "$as_me: error: cannot run C compiled programs.
-If you meant to cross compile, use \`--host'.
-See \`config.log' for more details." >&2;}
-   { (exit 1); exit 1; }; }; }
+See \`config.log' for more details." "$LINENO" 5; }
     fi
   fi
 fi
-echo "$as_me:$LINENO: result: yes" >&5
-echo "${ECHO_T}yes" >&6
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5
+$as_echo "yes" >&6; }
 
-rm -f a.out a.exe conftest$ac_cv_exeext b.out
+rm -f -r a.out a.out.dSYM a.exe conftest$ac_cv_exeext b.out conftest.out
 ac_clean_files=$ac_clean_files_save
-# Check the compiler produces executables we can run.  If not, either
+# Check that the compiler produces executables we can run.  If not, either
 # the compiler is broken, or we cross compile.
-echo "$as_me:$LINENO: checking whether we are cross compiling" >&5
-echo $ECHO_N "checking whether we are cross compiling... $ECHO_C" >&6
-echo "$as_me:$LINENO: result: $cross_compiling" >&5
-echo "${ECHO_T}$cross_compiling" >&6
-
-echo "$as_me:$LINENO: checking for suffix of executables" >&5
-echo $ECHO_N "checking for suffix of executables... $ECHO_C" >&6
-if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
-  (eval $ac_link) 2>&5
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether we are cross compiling" >&5
+$as_echo_n "checking whether we are cross compiling... " >&6; }
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $cross_compiling" >&5
+$as_echo "$cross_compiling" >&6; }
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for suffix of executables" >&5
+$as_echo_n "checking for suffix of executables... " >&6; }
+if { { ac_try="$ac_link"
+case "(($ac_try" in
+  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+  *) ac_try_echo=$ac_try;;
+esac
+eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\""
+$as_echo "$ac_try_echo"; } >&5
+  (eval "$ac_link") 2>&5
   ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; then
+  $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+  test $ac_status = 0; }; then :
   # If both `conftest.exe' and `conftest' are `present' (well, observable)
 # catch `conftest.exe'.  For instance with Cygwin, `ls conftest' will
 # work properly (i.e., refer to `conftest.exe'), while it won't with
@@ -1929,40 +2977,31 @@ if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
 for ac_file in conftest.exe conftest conftest.*; do
   test -f "$ac_file" || continue
   case $ac_file in
-    *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.o | *.obj ) ;;
+    *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.map | *.inf | *.dSYM | *.o | *.obj ) ;;
     *.* ) ac_cv_exeext=`expr "$ac_file" : '[^.]*\(\..*\)'`
-	  export ac_cv_exeext
 	  break;;
     * ) break;;
   esac
 done
 else
-  { { echo "$as_me:$LINENO: error: in \`$ac_pwd':" >&5
-echo "$as_me: error: in \`$ac_pwd':" >&2;}
-{ { echo "$as_me:$LINENO: error: cannot compute suffix of executables: cannot compile and link
-See \`config.log' for more details." >&5
-echo "$as_me: error: cannot compute suffix of executables: cannot compile and link
-See \`config.log' for more details." >&2;}
-   { (exit 1); exit 1; }; }; }
+  { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5
+$as_echo "$as_me: error: in \`$ac_pwd':" >&2;}
+as_fn_error "cannot compute suffix of executables: cannot compile and link
+See \`config.log' for more details." "$LINENO" 5; }
 fi
-
 rm -f conftest$ac_cv_exeext
-echo "$as_me:$LINENO: result: $ac_cv_exeext" >&5
-echo "${ECHO_T}$ac_cv_exeext" >&6
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_exeext" >&5
+$as_echo "$ac_cv_exeext" >&6; }
 
 rm -f conftest.$ac_ext
 EXEEXT=$ac_cv_exeext
 ac_exeext=$EXEEXT
-echo "$as_me:$LINENO: checking for suffix of object files" >&5
-echo $ECHO_N "checking for suffix of object files... $ECHO_C" >&6
-if test "${ac_cv_objext+set}" = set; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for suffix of object files" >&5
+$as_echo_n "checking for suffix of object files... " >&6; }
+if test "${ac_cv_objext+set}" = set; then :
+  $as_echo_n "(cached) " >&6
 else
-  cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h.  */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
+  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
 /* end confdefs.h.  */
 
 int
@@ -1974,47 +3013,46 @@ main ()
 }
 _ACEOF
 rm -f conftest.o conftest.obj
-if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
-  (eval $ac_compile) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; then
-  for ac_file in `(ls conftest.o conftest.obj; ls conftest.*) 2>/dev/null`; do
+if { { ac_try="$ac_compile"
+case "(($ac_try" in
+  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+  *) ac_try_echo=$ac_try;;
+esac
+eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\""
+$as_echo "$ac_try_echo"; } >&5
+  (eval "$ac_compile") 2>&5
+  ac_status=$?
+  $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+  test $ac_status = 0; }; then :
+  for ac_file in conftest.o conftest.obj conftest.*; do
+  test -f "$ac_file" || continue;
   case $ac_file in
-    *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg ) ;;
+    *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.map | *.inf | *.dSYM ) ;;
     *) ac_cv_objext=`expr "$ac_file" : '.*\.\(.*\)'`
        break;;
   esac
 done
 else
-  echo "$as_me: failed program was:" >&5
+  $as_echo "$as_me: failed program was:" >&5
 sed 's/^/| /' conftest.$ac_ext >&5
 
-{ { echo "$as_me:$LINENO: error: in \`$ac_pwd':" >&5
-echo "$as_me: error: in \`$ac_pwd':" >&2;}
-{ { echo "$as_me:$LINENO: error: cannot compute suffix of object files: cannot compile
-See \`config.log' for more details." >&5
-echo "$as_me: error: cannot compute suffix of object files: cannot compile
-See \`config.log' for more details." >&2;}
-   { (exit 1); exit 1; }; }; }
+{ { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5
+$as_echo "$as_me: error: in \`$ac_pwd':" >&2;}
+as_fn_error "cannot compute suffix of object files: cannot compile
+See \`config.log' for more details." "$LINENO" 5; }
 fi
-
 rm -f conftest.$ac_cv_objext conftest.$ac_ext
 fi
-echo "$as_me:$LINENO: result: $ac_cv_objext" >&5
-echo "${ECHO_T}$ac_cv_objext" >&6
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_objext" >&5
+$as_echo "$ac_cv_objext" >&6; }
 OBJEXT=$ac_cv_objext
 ac_objext=$OBJEXT
-echo "$as_me:$LINENO: checking whether we are using the GNU C compiler" >&5
-echo $ECHO_N "checking whether we are using the GNU C compiler... $ECHO_C" >&6
-if test "${ac_cv_c_compiler_gnu+set}" = set; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether we are using the GNU C compiler" >&5
+$as_echo_n "checking whether we are using the GNU C compiler... " >&6; }
+if test "${ac_cv_c_compiler_gnu+set}" = set; then :
+  $as_echo_n "(cached) " >&6
 else
-  cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h.  */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
+  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
 /* end confdefs.h.  */
 
 int
@@ -2028,55 +3066,34 @@ main ()
   return 0;
 }
 _ACEOF
-rm -f conftest.$ac_objext
-if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
-  (eval $ac_compile) 2>conftest.er1
-  ac_status=$?
-  grep -v '^ *+' conftest.er1 >conftest.err
-  rm -f conftest.er1
-  cat conftest.err >&5
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } &&
-	 { ac_try='test -z "$ac_c_werror_flag"
-			 || test ! -s conftest.err'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; } &&
-	 { ac_try='test -s conftest.$ac_objext'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; }; then
+if ac_fn_c_try_compile "$LINENO"; then :
   ac_compiler_gnu=yes
 else
-  echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-ac_compiler_gnu=no
+  ac_compiler_gnu=no
 fi
-rm -f conftest.err conftest.$ac_objext conftest.$ac_ext
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
 ac_cv_c_compiler_gnu=$ac_compiler_gnu
 
 fi
-echo "$as_me:$LINENO: result: $ac_cv_c_compiler_gnu" >&5
-echo "${ECHO_T}$ac_cv_c_compiler_gnu" >&6
-GCC=`test $ac_compiler_gnu = yes && echo yes`
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_c_compiler_gnu" >&5
+$as_echo "$ac_cv_c_compiler_gnu" >&6; }
+if test $ac_compiler_gnu = yes; then
+  GCC=yes
+else
+  GCC=
+fi
 ac_test_CFLAGS=${CFLAGS+set}
 ac_save_CFLAGS=$CFLAGS
-CFLAGS="-g"
-echo "$as_me:$LINENO: checking whether $CC accepts -g" >&5
-echo $ECHO_N "checking whether $CC accepts -g... $ECHO_C" >&6
-if test "${ac_cv_prog_cc_g+set}" = set; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
-else
-  cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h.  */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether $CC accepts -g" >&5
+$as_echo_n "checking whether $CC accepts -g... " >&6; }
+if test "${ac_cv_prog_cc_g+set}" = set; then :
+  $as_echo_n "(cached) " >&6
+else
+  ac_save_c_werror_flag=$ac_c_werror_flag
+   ac_c_werror_flag=yes
+   ac_cv_prog_cc_g=no
+   CFLAGS="-g"
+   cat confdefs.h - <<_ACEOF >conftest.$ac_ext
 /* end confdefs.h.  */
 
 int
@@ -2087,39 +3104,49 @@ main ()
   return 0;
 }
 _ACEOF
-rm -f conftest.$ac_objext
-if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
-  (eval $ac_compile) 2>conftest.er1
-  ac_status=$?
-  grep -v '^ *+' conftest.er1 >conftest.err
-  rm -f conftest.er1
-  cat conftest.err >&5
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } &&
-	 { ac_try='test -z "$ac_c_werror_flag"
-			 || test ! -s conftest.err'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; } &&
-	 { ac_try='test -s conftest.$ac_objext'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; }; then
+if ac_fn_c_try_compile "$LINENO"; then :
   ac_cv_prog_cc_g=yes
 else
-  echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
+  CFLAGS=""
+      cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+
+int
+main ()
+{
+
+  ;
+  return 0;
+}
+_ACEOF
+if ac_fn_c_try_compile "$LINENO"; then :
 
-ac_cv_prog_cc_g=no
+else
+  ac_c_werror_flag=$ac_save_c_werror_flag
+	 CFLAGS="-g"
+	 cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+
+int
+main ()
+{
+
+  ;
+  return 0;
+}
+_ACEOF
+if ac_fn_c_try_compile "$LINENO"; then :
+  ac_cv_prog_cc_g=yes
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
 fi
-rm -f conftest.err conftest.$ac_objext conftest.$ac_ext
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
 fi
-echo "$as_me:$LINENO: result: $ac_cv_prog_cc_g" >&5
-echo "${ECHO_T}$ac_cv_prog_cc_g" >&6
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+   ac_c_werror_flag=$ac_save_c_werror_flag
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_prog_cc_g" >&5
+$as_echo "$ac_cv_prog_cc_g" >&6; }
 if test "$ac_test_CFLAGS" = set; then
   CFLAGS=$ac_save_CFLAGS
 elif test $ac_cv_prog_cc_g = yes; then
@@ -2135,18 +3162,14 @@ else
     CFLAGS=
   fi
 fi
-echo "$as_me:$LINENO: checking for $CC option to accept ANSI C" >&5
-echo $ECHO_N "checking for $CC option to accept ANSI C... $ECHO_C" >&6
-if test "${ac_cv_prog_cc_stdc+set}" = set; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $CC option to accept ISO C89" >&5
+$as_echo_n "checking for $CC option to accept ISO C89... " >&6; }
+if test "${ac_cv_prog_cc_c89+set}" = set; then :
+  $as_echo_n "(cached) " >&6
 else
-  ac_cv_prog_cc_stdc=no
+  ac_cv_prog_cc_c89=no
 ac_save_CC=$CC
-cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h.  */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
+cat confdefs.h - <<_ACEOF >conftest.$ac_ext
 /* end confdefs.h.  */
 #include <stdarg.h>
 #include <stdio.h>
@@ -2174,12 +3197,17 @@ static char *f (char * (*g) (char **, int), char **p, ...)
 /* OSF 4.0 Compaq cc is some sort of almost-ANSI by default.  It has
    function prototypes and stuff, but not '\xHH' hex character constants.
    These don't provoke an error unfortunately, instead are silently treated
-   as 'x'.  The following induces an error, until -std1 is added to get
+   as 'x'.  The following induces an error, until -std is added to get
    proper ANSI mode.  Curiously '\x00'!='x' always comes out true, for an
    array size at least.  It's necessary to write '\x00'==0 to get something
-   that's true only with -std1.  */
+   that's true only with -std.  */
 int osf4_cc_array ['\x00' == 0 ? 1 : -1];
 
+/* IBM C 6 for AIX is almost-ANSI by default, but it replaces macro parameters
+   inside strings and character constants.  */
+#define FOO(x) 'x'
+int xlc6_cc_array[FOO(a) == 'x' ? 1 : -1];
+
 int test (int i, double x);
 struct s1 {int (*f) (int a);};
 struct s2 {int (*f) (double a);};
@@ -2194,205 +3222,37 @@ return f (e, argv, 0) != argv[0]  ||  f (e, argv, 1) != argv[1];
   return 0;
 }
 _ACEOF
-# Don't try gcc -ansi; that turns off useful extensions and
-# breaks some systems' header files.
-# AIX			-qlanglvl=ansi
-# Ultrix and OSF/1	-std1
-# HP-UX 10.20 and later	-Ae
-# HP-UX older versions	-Aa -D_HPUX_SOURCE
-# SVR4			-Xc -D__EXTENSIONS__
-for ac_arg in "" -qlanglvl=ansi -std1 -Ae "-Aa -D_HPUX_SOURCE" "-Xc -D__EXTENSIONS__"
+for ac_arg in '' -qlanglvl=extc89 -qlanglvl=ansi -std \
+	-Ae "-Aa -D_HPUX_SOURCE" "-Xc -D__EXTENSIONS__"
 do
   CC="$ac_save_CC $ac_arg"
-  rm -f conftest.$ac_objext
-if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
-  (eval $ac_compile) 2>conftest.er1
-  ac_status=$?
-  grep -v '^ *+' conftest.er1 >conftest.err
-  rm -f conftest.er1
-  cat conftest.err >&5
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } &&
-	 { ac_try='test -z "$ac_c_werror_flag"
-			 || test ! -s conftest.err'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; } &&
-	 { ac_try='test -s conftest.$ac_objext'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; }; then
-  ac_cv_prog_cc_stdc=$ac_arg
-break
-else
-  echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
+  if ac_fn_c_try_compile "$LINENO"; then :
+  ac_cv_prog_cc_c89=$ac_arg
 fi
-rm -f conftest.err conftest.$ac_objext
+rm -f core conftest.err conftest.$ac_objext
+  test "x$ac_cv_prog_cc_c89" != "xno" && break
 done
-rm -f conftest.$ac_ext conftest.$ac_objext
+rm -f conftest.$ac_ext
 CC=$ac_save_CC
 
 fi
-
-case "x$ac_cv_prog_cc_stdc" in
-  x|xno)
-    echo "$as_me:$LINENO: result: none needed" >&5
-echo "${ECHO_T}none needed" >&6 ;;
+# AC_CACHE_VAL
+case "x$ac_cv_prog_cc_c89" in
+  x)
+    { $as_echo "$as_me:${as_lineno-$LINENO}: result: none needed" >&5
+$as_echo "none needed" >&6; } ;;
+  xno)
+    { $as_echo "$as_me:${as_lineno-$LINENO}: result: unsupported" >&5
+$as_echo "unsupported" >&6; } ;;
   *)
-    echo "$as_me:$LINENO: result: $ac_cv_prog_cc_stdc" >&5
-echo "${ECHO_T}$ac_cv_prog_cc_stdc" >&6
-    CC="$CC $ac_cv_prog_cc_stdc" ;;
+    CC="$CC $ac_cv_prog_cc_c89"
+    { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_prog_cc_c89" >&5
+$as_echo "$ac_cv_prog_cc_c89" >&6; } ;;
 esac
+if test "x$ac_cv_prog_cc_c89" != xno; then :
 
-# Some people use a C++ compiler to compile C.  Since we use `exit',
-# in C++ we need to declare it.  In case someone uses the same compiler
-# for both compiling C and C++ we need to have the C++ compiler decide
-# the declaration of exit, since it's the most demanding environment.
-cat >conftest.$ac_ext <<_ACEOF
-#ifndef __cplusplus
-  choke me
-#endif
-_ACEOF
-rm -f conftest.$ac_objext
-if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
-  (eval $ac_compile) 2>conftest.er1
-  ac_status=$?
-  grep -v '^ *+' conftest.er1 >conftest.err
-  rm -f conftest.er1
-  cat conftest.err >&5
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } &&
-	 { ac_try='test -z "$ac_c_werror_flag"
-			 || test ! -s conftest.err'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; } &&
-	 { ac_try='test -s conftest.$ac_objext'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; }; then
-  for ac_declaration in \
-   '' \
-   'extern "C" void std::exit (int) throw (); using std::exit;' \
-   'extern "C" void std::exit (int); using std::exit;' \
-   'extern "C" void exit (int) throw ();' \
-   'extern "C" void exit (int);' \
-   'void exit (int);'
-do
-  cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h.  */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h.  */
-$ac_declaration
-#include <stdlib.h>
-int
-main ()
-{
-exit (42);
-  ;
-  return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext
-if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
-  (eval $ac_compile) 2>conftest.er1
-  ac_status=$?
-  grep -v '^ *+' conftest.er1 >conftest.err
-  rm -f conftest.er1
-  cat conftest.err >&5
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } &&
-	 { ac_try='test -z "$ac_c_werror_flag"
-			 || test ! -s conftest.err'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; } &&
-	 { ac_try='test -s conftest.$ac_objext'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; }; then
-  :
-else
-  echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-continue
 fi
-rm -f conftest.err conftest.$ac_objext conftest.$ac_ext
-  cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h.  */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h.  */
-$ac_declaration
-int
-main ()
-{
-exit (42);
-  ;
-  return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext
-if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
-  (eval $ac_compile) 2>conftest.er1
-  ac_status=$?
-  grep -v '^ *+' conftest.er1 >conftest.err
-  rm -f conftest.er1
-  cat conftest.err >&5
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } &&
-	 { ac_try='test -z "$ac_c_werror_flag"
-			 || test ! -s conftest.err'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; } &&
-	 { ac_try='test -s conftest.$ac_objext'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; }; then
-  break
-else
-  echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-fi
-rm -f conftest.err conftest.$ac_objext conftest.$ac_ext
-done
-rm -f conftest*
-if test -n "$ac_declaration"; then
-  echo '#ifdef __cplusplus' >>confdefs.h
-  echo $ac_declaration      >>confdefs.h
-  echo '#endif'             >>confdefs.h
-fi
-
-else
-  echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
 
-fi
-rm -f conftest.err conftest.$ac_objext conftest.$ac_ext
 ac_ext=c
 ac_cpp='$CPP $CPPFLAGS'
 ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
@@ -2422,22 +3282,20 @@ POSUB=
 if test -f  ../../intl/config.intl; then
   .  ../../intl/config.intl
 fi
-echo "$as_me:$LINENO: checking whether NLS is requested" >&5
-echo $ECHO_N "checking whether NLS is requested... $ECHO_C" >&6
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether NLS is requested" >&5
+$as_echo_n "checking whether NLS is requested... " >&6; }
 if test x"$USE_NLS" != xyes; then
-  echo "$as_me:$LINENO: result: no" >&5
-echo "${ECHO_T}no" >&6
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
 else
-  echo "$as_me:$LINENO: result: yes" >&5
-echo "${ECHO_T}yes" >&6
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5
+$as_echo "yes" >&6; }
 
-cat >>confdefs.h <<\_ACEOF
-#define ENABLE_NLS 1
-_ACEOF
+$as_echo "#define ENABLE_NLS 1" >>confdefs.h
 
 
-  echo "$as_me:$LINENO: checking for catalogs to be installed" >&5
-echo $ECHO_N "checking for catalogs to be installed... $ECHO_C" >&6
+  { $as_echo "$as_me:${as_lineno-$LINENO}: checking for catalogs to be installed" >&5
+$as_echo_n "checking for catalogs to be installed... " >&6; }
   # Look for .po and .gmo files in the source directory.
   CATALOGS=
   XLINGUAS=
@@ -2468,8 +3326,8 @@ echo $ECHO_N "checking for catalogs to be installed... $ECHO_C" >&6
     fi
   done
   LINGUAS="$XLINGUAS"
-  echo "$as_me:$LINENO: result: $LINGUAS" >&5
-echo "${ECHO_T}$LINGUAS" >&6
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $LINGUAS" >&5
+$as_echo "$LINGUAS" >&6; }
 
 
     DATADIRNAME=share
@@ -2483,78 +3341,69 @@ echo "${ECHO_T}$LINGUAS" >&6
 fi
 
 
-# Check whether --enable-sim-alignment or --disable-sim-alignment was given.
-if test "${enable_sim_alignment+set}" = set; then
-  enableval="$enable_sim_alignment"
-  case "${enableval}" in
+# Check whether --enable-sim-alignment was given.
+if test "${enable_sim_alignment+set}" = set; then :
+  enableval=$enable_sim_alignment; case "${enableval}" in
   yes | strict | STRICT)	sim_alignment="-DWITH_ALIGNMENT=STRICT_ALIGNMENT";;
   no | nonstrict | NONSTRICT)	sim_alignment="-DWITH_ALIGNMENT=NONSTRICT_ALIGNMENT";;
   0 | default | DEFAULT)	sim_alignment="-DWITH_ALIGNMENT=0";;
-  *)				{ { echo "$as_me:$LINENO: error: \"Unknown value $enableval passed to --enable-sim-alignment\"" >&5
-echo "$as_me: error: \"Unknown value $enableval passed to --enable-sim-alignment\"" >&2;}
-   { (exit 1); exit 1; }; }; sim_alignment="";;
+  *)				as_fn_error "\"Unknown value $enableval passed to --enable-sim-alignment\"" "$LINENO" 5; sim_alignment="";;
 esac
 if test x"$silent" != x"yes" && test x"$sim_alignment" != x""; then
   echo "Setting alignment flags = $sim_alignment" 6>&1
 fi
 else
   sim_alignment=""
-fi;
+fi
+
 
-# Check whether --enable-sim-assert or --disable-sim-assert was given.
-if test "${enable_sim_assert+set}" = set; then
-  enableval="$enable_sim_assert"
-  case "${enableval}" in
+# Check whether --enable-sim-assert was given.
+if test "${enable_sim_assert+set}" = set; then :
+  enableval=$enable_sim_assert; case "${enableval}" in
   yes)	sim_assert="-DWITH_ASSERT=1";;
   no)	sim_assert="-DWITH_ASSERT=0";;
-  *)	{ { echo "$as_me:$LINENO: error: \"--enable-sim-assert does not take a value\"" >&5
-echo "$as_me: error: \"--enable-sim-assert does not take a value\"" >&2;}
-   { (exit 1); exit 1; }; }; sim_assert="";;
+  *)	as_fn_error "\"--enable-sim-assert does not take a value\"" "$LINENO" 5; sim_assert="";;
 esac
 if test x"$silent" != x"yes" && test x"$sim_assert" != x""; then
   echo "Setting assert flags = $sim_assert" 6>&1
 fi
 else
   sim_assert=""
-fi;
+fi
+
 
-# Check whether --enable-sim-bitsize or --disable-sim-bitsize was given.
-if test "${enable_sim_bitsize+set}" = set; then
-  enableval="$enable_sim_bitsize"
-  case "${enableval}" in
+# Check whether --enable-sim-bitsize was given.
+if test "${enable_sim_bitsize+set}" = set; then :
+  enableval=$enable_sim_bitsize; case "${enableval}" in
   32|64) sim_bitsize="-DWITH_TARGET_WORD_BITSIZE=$enableval";;
-  *)	 { { echo "$as_me:$LINENO: error: \"--enable-sim-bitsize was given $enableval.  Expected 32 or 64\"" >&5
-echo "$as_me: error: \"--enable-sim-bitsize was given $enableval.  Expected 32 or 64\"" >&2;}
-   { (exit 1); exit 1; }; }; sim_bitsize="";;
+  *)	 as_fn_error "\"--enable-sim-bitsize was given $enableval.  Expected 32 or 64\"" "$LINENO" 5; sim_bitsize="";;
 esac
 if test x"$silent" != x"yes" && test x"$sim_bitsize" != x""; then
   echo "Setting bitsize flags = $sim_bitsize" 6>&1
 fi
 else
   sim_bitsize=""
-fi;
+fi
 
-# Check whether --enable-sim-bswap or --disable-sim-bswap was given.
-if test "${enable_sim_bswap+set}" = set; then
-  enableval="$enable_sim_bswap"
-  case "${enableval}" in
+
+# Check whether --enable-sim-bswap was given.
+if test "${enable_sim_bswap+set}" = set; then :
+  enableval=$enable_sim_bswap; case "${enableval}" in
   yes)	sim_bswap="-DWITH_BSWAP=1";;
   no)	sim_bswap="-DWITH_BSWAP=0";;
-  *)	{ { echo "$as_me:$LINENO: error: \"--enable-sim-bswap does not take a value\"" >&5
-echo "$as_me: error: \"--enable-sim-bswap does not take a value\"" >&2;}
-   { (exit 1); exit 1; }; }; sim_bswap="";;
+  *)	as_fn_error "\"--enable-sim-bswap does not take a value\"" "$LINENO" 5; sim_bswap="";;
 esac
 if test x"$silent" != x"yes" && test x"$sim_bswap" != x""; then
   echo "Setting bswap flags = $sim_bswap" 6>&1
 fi
 else
   sim_bswap=""
-fi;
+fi
 
-# Check whether --enable-sim-cflags or --disable-sim-cflags was given.
-if test "${enable_sim_cflags+set}" = set; then
-  enableval="$enable_sim_cflags"
-  case "${enableval}" in
+
+# Check whether --enable-sim-cflags was given.
+if test "${enable_sim_cflags+set}" = set; then :
+  enableval=$enable_sim_cflags; case "${enableval}" in
   yes)	sim_cflags="-O2 -fomit-frame-pointer";;
   no)	sim_cflags="";;
   *)	sim_cflags=`echo "${enableval}" | sed -e "s/,/ /g"`;;
@@ -2564,23 +3413,19 @@ if test x"$silent" != x"yes" && test x"$sim_cflags" != x""; then
 fi
 else
   sim_cflags=""
-fi;
-
-# Check whether --enable-sim-config or --disable-sim-config was given.
-if test "${enable_sim_config+set}" = set; then
-  enableval="$enable_sim_config"
-  case "${enableval}" in
-  yes|no)	{ { echo "$as_me:$LINENO: error: \"No value supplied for --enable-sim-config=file\"" >&5
-echo "$as_me: error: \"No value supplied for --enable-sim-config=file\"" >&2;}
-   { (exit 1); exit 1; }; };;
+fi
+
+
+# Check whether --enable-sim-config was given.
+if test "${enable_sim_config+set}" = set; then :
+  enableval=$enable_sim_config; case "${enableval}" in
+  yes|no)	as_fn_error "\"No value supplied for --enable-sim-config=file\"" "$LINENO" 5;;
   *)		if test -f "${srcdir}/${enableval}"; then
 		  sim_config="${enableval}";
 		elif test -f "${srcdir}/${enableval}-config.h"; then
 		  sim_config="${enableval}-config.h"
 		else
-		  { { echo "$as_me:$LINENO: error: \"Config file $enableval was not found\"" >&5
-echo "$as_me: error: \"Config file $enableval was not found\"" >&2;}
-   { (exit 1); exit 1; }; };
+		  as_fn_error "\"Config file $enableval was not found\"" "$LINENO" 5;
 		  sim_config=std-config.h
 		fi;;
 esac
@@ -2592,19 +3437,15 @@ else
 if test x"$silent" != x"yes"; then
   echo "Setting config flags = $sim_config" 6>&1
 fi
-fi;
+fi
 
-# Check whether --enable-sim-decode-mechanism or --disable-sim-decode-mechanism was given.
-if test "${enable_sim_decode_mechanism+set}" = set; then
-  enableval="$enable_sim_decode_mechanism"
-  case "${enableval}" in
-  yes|no)	{ { echo "$as_me:$LINENO: error: \"No value supplied for --enable-sim-decode-mechanism=file\"" >&5
-echo "$as_me: error: \"No value supplied for --enable-sim-decode-mechanism=file\"" >&2;}
-   { (exit 1); exit 1; }; };;
+
+# Check whether --enable-sim-decode-mechanism was given.
+if test "${enable_sim_decode_mechanism+set}" = set; then :
+  enableval=$enable_sim_decode_mechanism; case "${enableval}" in
+  yes|no)	as_fn_error "\"No value supplied for --enable-sim-decode-mechanism=file\"" "$LINENO" 5;;
   array|switch|padded-switch|goto-switch)	sim_decode_mechanism="-T ${enableval}";;
-  *)		{ { echo "$as_me:$LINENO: error: \"File $enableval is not an opcode rules file\"" >&5
-echo "$as_me: error: \"File $enableval is not an opcode rules file\"" >&2;}
-   { (exit 1); exit 1; }; };
+  *)		as_fn_error "\"File $enableval is not an opcode rules file\"" "$LINENO" 5;
 		sim_decode_mechanism="switch";;
 esac
 if test x"$silent" != x"yes" && test x"$sim_decode_mechanism" != x""; then
@@ -2615,15 +3456,13 @@ else
 if test x"$silent" != x"yes"; then
   echo "Setting decode mechanism flags = $sim_decode_mechanism"
 fi
-fi;
+fi
+
 
-# Check whether --enable-sim-default-model or --disable-sim-default-model was given.
-if test "${enable_sim_default_model+set}" = set; then
-  enableval="$enable_sim_default_model"
-  case "${enableval}" in
-  yes|no)	{ { echo "$as_me:$LINENO: error: \"No value supplied for --enable-sim-default-model=model\"" >&5
-echo "$as_me: error: \"No value supplied for --enable-sim-default-model=model\"" >&2;}
-   { (exit 1); exit 1; }; };;
+# Check whether --enable-sim-default-model was given.
+if test "${enable_sim_default_model+set}" = set; then :
+  enableval=$enable_sim_default_model; case "${enableval}" in
+  yes|no)	as_fn_error "\"No value supplied for --enable-sim-default-model=model\"" "$LINENO" 5;;
   *)		sim_default_model="-DWITH_DEFAULT_MODEL=${enableval}";;
 esac
 if test x"$silent" != x"yes" && test x"$sim_default_model" != x""; then
@@ -2631,17 +3470,15 @@ if test x"$silent" != x"yes" && test x"$sim_default_model" != x""; then
 fi
 else
   sim_default_model=""
-fi;
+fi
+
 
-# Check whether --enable-sim-duplicate or --disable-sim-duplicate was given.
-if test "${enable_sim_duplicate+set}" = set; then
-  enableval="$enable_sim_duplicate"
-  case "${enableval}" in
+# Check whether --enable-sim-duplicate was given.
+if test "${enable_sim_duplicate+set}" = set; then :
+  enableval=$enable_sim_duplicate; case "${enableval}" in
   yes)	sim_dup="-E";;
   no)	sim_dup="";;
-  *)	{ { echo "$as_me:$LINENO: error: \"--enable-sim-duplicate does not take a value\"" >&5
-echo "$as_me: error: \"--enable-sim-duplicate does not take a value\"" >&2;}
-   { (exit 1); exit 1; }; }; sim_dup="";;
+  *)	as_fn_error "\"--enable-sim-duplicate does not take a value\"" "$LINENO" 5; sim_dup="";;
 esac
 if test x"$silent" != x"yes" && test x"$sim_dup" != x""; then
   echo "Setting duplicate flags = $sim_dup" 6>&1
@@ -2651,12 +3488,12 @@ else
 if test x"$silent" != x"yes"; then
   echo "Setting duplicate flags = $sim_dup" 6>&1
 fi
-fi;
+fi
+
 
-# Check whether --enable-sim-endian or --disable-sim-endian was given.
-if test "${enable_sim_endian+set}" = set; then
-  enableval="$enable_sim_endian"
-  case "${enableval}" in
+# Check whether --enable-sim-endian was given.
+if test "${enable_sim_endian+set}" = set; then :
+  enableval=$enable_sim_endian; case "${enableval}" in
   yes)	case "$target" in
 	  *powerpc-*) sim_endian="-DWITH_TARGET_BYTE_ORDER=BIG_ENDIAN";;
 	  *powerpcle-*) sim_endian="-DWITH_TARGET_BYTE_ORDER=LITTLE_ENDIAN";;
@@ -2665,43 +3502,37 @@ if test "${enable_sim_endian+set}" = set; then
   no)	 sim_endian="-DWITH_TARGET_BYTE_ORDER=0";;
   b*|B*) sim_endian="-DWITH_TARGET_BYTE_ORDER=BIG_ENDIAN";;
   l*|L*) sim_endian="-DWITH_TARGET_BYTE_ORDER=LITTLE_ENDIAN";;
-  *)	 { { echo "$as_me:$LINENO: error: \"Unknown value $enableval for --enable-sim-endian\"" >&5
-echo "$as_me: error: \"Unknown value $enableval for --enable-sim-endian\"" >&2;}
-   { (exit 1); exit 1; }; }; sim_endian="";;
+  *)	 as_fn_error "\"Unknown value $enableval for --enable-sim-endian\"" "$LINENO" 5; sim_endian="";;
 esac
 if test x"$silent" != x"yes" && test x"$sim_endian" != x""; then
   echo "Setting endian flags = $sim_endian" 6>&1
 fi
 else
   sim_endian=""
-fi;
+fi
+
 
-# Check whether --enable-sim-env or --disable-sim-env was given.
-if test "${enable_sim_env+set}" = set; then
-  enableval="$enable_sim_env"
-  case "${enableval}" in
+# Check whether --enable-sim-env was given.
+if test "${enable_sim_env+set}" = set; then :
+  enableval=$enable_sim_env; case "${enableval}" in
   operating | os | oea)	sim_env="-DWITH_ENVIRONMENT=OPERATING_ENVIRONMENT";;
   virtual | vea)	sim_env="-DWITH_ENVIRONMENT=VIRTUAL_ENVIRONMENT";;
   user | uea)		sim_env="-DWITH_ENVIRONMENT=USER_ENVIRONMENT";;
   no)			sim_env="-DWITH_ENVIRONMENT=0";;
-  *)			{ { echo "$as_me:$LINENO: error: \"Unknown value $enableval passed to --enable-sim-env\"" >&5
-echo "$as_me: error: \"Unknown value $enableval passed to --enable-sim-env\"" >&2;}
-   { (exit 1); exit 1; }; }; sim_env="";;
+  *)			as_fn_error "\"Unknown value $enableval passed to --enable-sim-env\"" "$LINENO" 5; sim_env="";;
 esac
 if test x"$silent" != x"yes" && test x"$sim_env" != x""; then
   echo "Setting env flags = $sim_env" 6>&1
 fi
 else
   sim_env=""
-fi;
-
-# Check whether --enable-sim-filter or --disable-sim-filter was given.
-if test "${enable_sim_filter+set}" = set; then
-  enableval="$enable_sim_filter"
-  case "${enableval}" in
-  yes)	{ { echo "$as_me:$LINENO: error: \"--enable-sim-filter must be specified with a rule to filter or no\"" >&5
-echo "$as_me: error: \"--enable-sim-filter must be specified with a rule to filter or no\"" >&2;}
-   { (exit 1); exit 1; }; }; sim_filter="";;
+fi
+
+
+# Check whether --enable-sim-filter was given.
+if test "${enable_sim_filter+set}" = set; then :
+  enableval=$enable_sim_filter; case "${enableval}" in
+  yes)	as_fn_error "\"--enable-sim-filter must be specified with a rule to filter or no\"" "$LINENO" 5; sim_filter="";;
   no)	sim_filter="";;
   *)	sim_filter="-F $enableval";;
 esac
@@ -2713,19 +3544,17 @@ else
 if test x"$silent" != x"yes"; then
   echo "Setting filter flags = $sim_filter" 6>&1
 fi
-fi;
+fi
+
 
-# Check whether --enable-sim-float or --disable-sim-float was given.
-if test "${enable_sim_float+set}" = set; then
-  enableval="$enable_sim_float"
-  case "${enableval}" in
+# Check whether --enable-sim-float was given.
+if test "${enable_sim_float+set}" = set; then :
+  enableval=$enable_sim_float; case "${enableval}" in
   yes | hard)	sim_float="-DWITH_FLOATING_POINT=HARD_FLOATING_POINT";;
   no | soft)	sim_float="-DWITH_FLOATING_POINT=SOFT_FLOATING_POINT";;
   altivec)      sim_float="-DWITH_ALTIVEC" ; sim_filter="${sim_filter},av" ;;
   *spe*|*simd*) sim_float="-DWITH_E500" ; sim_filter="${sim_filter},e500" ;;
-  *)		{ { echo "$as_me:$LINENO: error: \"Unknown value $enableval passed to --enable-sim-float\"" >&5
-echo "$as_me: error: \"Unknown value $enableval passed to --enable-sim-float\"" >&2;}
-   { (exit 1); exit 1; }; }; sim_float="";;
+  *)		as_fn_error "\"Unknown value $enableval passed to --enable-sim-float\"" "$LINENO" 5; sim_float="";;
 esac
 if test x"$silent" != x"yes" && test x"$sim_float" != x""; then
   echo "Setting float flags = $sim_float" 6>&1
@@ -2738,18 +3567,15 @@ case "${target}" in
   *) sim_float=""
 esac
 
-fi;
+fi
+
 
-echo "$as_me:$LINENO: checking if union semun defined" >&5
-echo $ECHO_N "checking if union semun defined... $ECHO_C" >&6
-if test "${ac_cv_HAS_UNION_SEMUN+set}" = set; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking if union semun defined" >&5
+$as_echo_n "checking if union semun defined... " >&6; }
+if test "${ac_cv_HAS_UNION_SEMUN+set}" = set; then :
+  $as_echo_n "(cached) " >&6
 else
-  cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h.  */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
+  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
 /* end confdefs.h.  */
 
 #include <sys/types.h>
@@ -2763,59 +3589,31 @@ union semun arg ;
   return 0;
 }
 _ACEOF
-rm -f conftest.$ac_objext
-if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
-  (eval $ac_compile) 2>conftest.er1
-  ac_status=$?
-  grep -v '^ *+' conftest.er1 >conftest.err
-  rm -f conftest.er1
-  cat conftest.err >&5
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } &&
-	 { ac_try='test -z "$ac_c_werror_flag"
-			 || test ! -s conftest.err'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; } &&
-	 { ac_try='test -s conftest.$ac_objext'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; }; then
+if ac_fn_c_try_compile "$LINENO"; then :
   ac_cv_has_union_semun="yes"
 else
-  echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-ac_cv_has_union_semun="no"
+  ac_cv_has_union_semun="no"
 fi
-rm -f conftest.err conftest.$ac_objext conftest.$ac_ext
-echo "$as_me:$LINENO: result: $ac_cv_has_union_semun" >&5
-echo "${ECHO_T}$ac_cv_has_union_semun" >&6
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_has_union_semun" >&5
+$as_echo "$ac_cv_has_union_semun" >&6; }
 
 fi
-echo "$as_me:$LINENO: result: $ac_cv_HAS_UNION_SEMUN" >&5
-echo "${ECHO_T}$ac_cv_HAS_UNION_SEMUN" >&6
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_HAS_UNION_SEMUN" >&5
+$as_echo "$ac_cv_HAS_UNION_SEMUN" >&6; }
 
 
 if test "$ac_cv_has_union_semun" = "yes"; then
-  echo "$as_me:$LINENO: checking whether System V semaphores are supported" >&5
-echo $ECHO_N "checking whether System V semaphores are supported... $ECHO_C" >&6
-if test "${ac_cv_sysv_sem+set}" = set; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
+  { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether System V semaphores are supported" >&5
+$as_echo_n "checking whether System V semaphores are supported... " >&6; }
+if test "${ac_cv_sysv_sem+set}" = set; then :
+  $as_echo_n "(cached) " >&6
 else
 
-  if test "$cross_compiling" = yes; then
+  if test "$cross_compiling" = yes; then :
   :
 else
-  cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h.  */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
+  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
 /* end confdefs.h.  */
 
   #include <sys/types.h>
@@ -2834,47 +3632,30 @@ cat >>conftest.$ac_ext <<_ACEOF
   }
 
 _ACEOF
-rm -f conftest$ac_exeext
-if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
-  (eval $ac_link) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } && { ac_try='./conftest$ac_exeext'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; }; then
+if ac_fn_c_try_run "$LINENO"; then :
   ac_cv_sysv_sem="yes"
 else
-  echo "$as_me: program exited with status $ac_status" >&5
-echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-( exit $ac_status )
-ac_cv_sysv_sem="no"
+  ac_cv_sysv_sem="no"
 fi
-rm -f core *.core gmon.out bb.out conftest$ac_exeext conftest.$ac_objext conftest.$ac_ext
+rm -f core *.core core.conftest.* gmon.out bb.out conftest$ac_exeext \
+  conftest.$ac_objext conftest.beam conftest.$ac_ext
 fi
 
+
 fi
-echo "$as_me:$LINENO: result: $ac_cv_sysv_sem" >&5
-echo "${ECHO_T}$ac_cv_sysv_sem" >&6
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_sysv_sem" >&5
+$as_echo "$ac_cv_sysv_sem" >&6; }
 else  # semun is not defined
-  echo "$as_me:$LINENO: checking whether System V semaphores are supported" >&5
-echo $ECHO_N "checking whether System V semaphores are supported... $ECHO_C" >&6
-if test "${ac_cv_sysv_sem+set}" = set; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
+  { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether System V semaphores are supported" >&5
+$as_echo_n "checking whether System V semaphores are supported... " >&6; }
+if test "${ac_cv_sysv_sem+set}" = set; then :
+  $as_echo_n "(cached) " >&6
 else
 
-  if test "$cross_compiling" = yes; then
+  if test "$cross_compiling" = yes; then :
   :
 else
-  cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h.  */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
+  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
 /* end confdefs.h.  */
 
   #include <sys/types.h>
@@ -2898,48 +3679,31 @@ cat >>conftest.$ac_ext <<_ACEOF
   }
 
 _ACEOF
-rm -f conftest$ac_exeext
-if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
-  (eval $ac_link) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } && { ac_try='./conftest$ac_exeext'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; }; then
+if ac_fn_c_try_run "$LINENO"; then :
   ac_cv_sysv_sem="yes"
 else
-  echo "$as_me: program exited with status $ac_status" >&5
-echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-( exit $ac_status )
-ac_cv_sysv_sem="no"
+  ac_cv_sysv_sem="no"
 fi
-rm -f core *.core gmon.out bb.out conftest$ac_exeext conftest.$ac_objext conftest.$ac_ext
+rm -f core *.core core.conftest.* gmon.out bb.out conftest$ac_exeext \
+  conftest.$ac_objext conftest.beam conftest.$ac_ext
 fi
 
+
 fi
-echo "$as_me:$LINENO: result: $ac_cv_sysv_sem" >&5
-echo "${ECHO_T}$ac_cv_sysv_sem" >&6
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_sysv_sem" >&5
+$as_echo "$ac_cv_sysv_sem" >&6; }
 fi
 
-echo "$as_me:$LINENO: checking whether System V shared memory is supported" >&5
-echo $ECHO_N "checking whether System V shared memory is supported... $ECHO_C" >&6
-if test "${ac_cv_sysv_shm+set}" = set; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether System V shared memory is supported" >&5
+$as_echo_n "checking whether System V shared memory is supported... " >&6; }
+if test "${ac_cv_sysv_shm+set}" = set; then :
+  $as_echo_n "(cached) " >&6
 else
 
-if test "$cross_compiling" = yes; then
+if test "$cross_compiling" = yes; then :
   :
 else
-  cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h.  */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
+  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
 /* end confdefs.h.  */
 
 #include <sys/types.h>
@@ -2955,32 +3719,19 @@ int main () {
 }
 
 _ACEOF
-rm -f conftest$ac_exeext
-if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
-  (eval $ac_link) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } && { ac_try='./conftest$ac_exeext'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; }; then
+if ac_fn_c_try_run "$LINENO"; then :
   ac_cv_sysv_shm="yes"
 else
-  echo "$as_me: program exited with status $ac_status" >&5
-echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-( exit $ac_status )
-ac_cv_sysv_shm="no"
+  ac_cv_sysv_shm="no"
 fi
-rm -f core *.core gmon.out bb.out conftest$ac_exeext conftest.$ac_objext conftest.$ac_ext
+rm -f core *.core core.conftest.* gmon.out bb.out conftest$ac_exeext \
+  conftest.$ac_objext conftest.beam conftest.$ac_ext
 fi
 
+
 fi
-echo "$as_me:$LINENO: result: $ac_cv_sysv_shm" >&5
-echo "${ECHO_T}$ac_cv_sysv_shm" >&6
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_sysv_shm" >&5
+$as_echo "$ac_cv_sysv_shm" >&6; }
 
 if test x"$ac_cv_sysv_shm" = x"yes" -a x"$ac_cv_sysv_sem" = x"yes" ; then
   sim_sysv_ipc_hw=",sem,shm";
@@ -2993,15 +3744,12 @@ if test x"$ac_cv_has_union_semun" = x"yes" -a x"$ac_cv_sysv_sem" = x"yes" ; then
 fi
 
 
-# Check whether --enable-sim-hardware or --disable-sim-hardware was given.
-if test "${enable_sim_hardware+set}" = set; then
-  enableval="$enable_sim_hardware"
-  hardware="cpu,memory,nvram,iobus,htab,disk,trace,register,vm,init,core,pal,com,eeprom,opic,glue,phb,ide${sim_sysv_ipc_hw}"
+# Check whether --enable-sim-hardware was given.
+if test "${enable_sim_hardware+set}" = set; then :
+  enableval=$enable_sim_hardware; hardware="cpu,memory,nvram,iobus,htab,disk,trace,register,vm,init,core,pal,com,eeprom,opic,glue,phb,ide${sim_sysv_ipc_hw}"
 case "${enableval}" in
   yes)	;;
-  no)	{ { echo "$as_me:$LINENO: error: \"List of hardware must be specified for --enable-sim-hardware\"" >&5
-echo "$as_me: error: \"List of hardware must be specified for --enable-sim-hardware\"" >&2;}
-   { (exit 1); exit 1; }; }; hardware="";;
+  no)	as_fn_error "\"List of hardware must be specified for --enable-sim-hardware\"" "$LINENO" 5; hardware="";;
   ,*)   hardware="${hardware}${enableval}";;
   *,)   hardware="${enableval}${hardware}";;
   *)	hardware="${enableval}"'';;
@@ -3018,33 +3766,427 @@ sim_hw_obj=`echo $sim_hw_src | sed -e 's/\.c/.o/g'`
 if test x"$silent" != x"yes"; then
   echo "Setting hardware to $sim_hw_src, $sim_hw_obj"
 fi
-fi;
-# Check whether --enable-sim-hostbitsize or --disable-sim-hostbitsize was given.
-if test "${enable_sim_hostbitsize+set}" = set; then
-  enableval="$enable_sim_hostbitsize"
-  case "${enableval}" in
+fi
+
+# Check whether --enable-sim-hostbitsize was given.
+if test "${enable_sim_hostbitsize+set}" = set; then :
+  enableval=$enable_sim_hostbitsize; case "${enableval}" in
   32|64) sim_hostbitsize="-DWITH_HOST_WORD_BITSIZE=$enableval";;
-  *)	 { { echo "$as_me:$LINENO: error: \"--enable-sim-hostbitsize was given $enableval.  Expected 32 or 64\"" >&5
-echo "$as_me: error: \"--enable-sim-hostbitsize was given $enableval.  Expected 32 or 64\"" >&2;}
-   { (exit 1); exit 1; }; }; sim_hostbitsize="";;
+  *)	 as_fn_error "\"--enable-sim-hostbitsize was given $enableval.  Expected 32 or 64\"" "$LINENO" 5; sim_hostbitsize="";;
 esac
 if test x"$silent" != x"yes" && test x"$sim_hostbitsize" != x""; then
   echo "Setting hostbitsize flags = $sim_hostbitsize" 6>&1
 fi
 else
   sim_hostbitsize=""
-fi;
+fi
+
+
+ac_ext=c
+ac_cpp='$CPP $CPPFLAGS'
+ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
+ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
+ac_compiler_gnu=$ac_cv_c_compiler_gnu
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking how to run the C preprocessor" >&5
+$as_echo_n "checking how to run the C preprocessor... " >&6; }
+# On Suns, sometimes $CPP names a directory.
+if test -n "$CPP" && test -d "$CPP"; then
+  CPP=
+fi
+if test -z "$CPP"; then
+  if test "${ac_cv_prog_CPP+set}" = set; then :
+  $as_echo_n "(cached) " >&6
+else
+      # Double quotes because CPP needs to be expanded
+    for CPP in "$CC -E" "$CC -E -traditional-cpp" "/lib/cpp"
+    do
+      ac_preproc_ok=false
+for ac_c_preproc_warn_flag in '' yes
+do
+  # Use a header file that comes with gcc, so configuring glibc
+  # with a fresh cross-compiler works.
+  # Prefer <limits.h> to <assert.h> if __STDC__ is defined, since
+  # <limits.h> exists even on freestanding compilers.
+  # On the NeXT, cc -E runs the code through the compiler's parser,
+  # not just through cpp. "Syntax error" is here to catch this case.
+  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+#ifdef __STDC__
+# include <limits.h>
+#else
+# include <assert.h>
+#endif
+		     Syntax error
+_ACEOF
+if ac_fn_c_try_cpp "$LINENO"; then :
+
+else
+  # Broken: fails on valid input.
+continue
+fi
+rm -f conftest.err conftest.$ac_ext
+
+  # OK, works on sane cases.  Now check whether nonexistent headers
+  # can be detected and how.
+  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+#include <ac_nonexistent.h>
+_ACEOF
+if ac_fn_c_try_cpp "$LINENO"; then :
+  # Broken: success on invalid input.
+continue
+else
+  # Passes both tests.
+ac_preproc_ok=:
+break
+fi
+rm -f conftest.err conftest.$ac_ext
+
+done
+# Because of `break', _AC_PREPROC_IFELSE's cleaning code was skipped.
+rm -f conftest.err conftest.$ac_ext
+if $ac_preproc_ok; then :
+  break
+fi
+
+    done
+    ac_cv_prog_CPP=$CPP
+
+fi
+  CPP=$ac_cv_prog_CPP
+else
+  ac_cv_prog_CPP=$CPP
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $CPP" >&5
+$as_echo "$CPP" >&6; }
+ac_preproc_ok=false
+for ac_c_preproc_warn_flag in '' yes
+do
+  # Use a header file that comes with gcc, so configuring glibc
+  # with a fresh cross-compiler works.
+  # Prefer <limits.h> to <assert.h> if __STDC__ is defined, since
+  # <limits.h> exists even on freestanding compilers.
+  # On the NeXT, cc -E runs the code through the compiler's parser,
+  # not just through cpp. "Syntax error" is here to catch this case.
+  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+#ifdef __STDC__
+# include <limits.h>
+#else
+# include <assert.h>
+#endif
+		     Syntax error
+_ACEOF
+if ac_fn_c_try_cpp "$LINENO"; then :
+
+else
+  # Broken: fails on valid input.
+continue
+fi
+rm -f conftest.err conftest.$ac_ext
+
+  # OK, works on sane cases.  Now check whether nonexistent headers
+  # can be detected and how.
+  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+#include <ac_nonexistent.h>
+_ACEOF
+if ac_fn_c_try_cpp "$LINENO"; then :
+  # Broken: success on invalid input.
+continue
+else
+  # Passes both tests.
+ac_preproc_ok=:
+break
+fi
+rm -f conftest.err conftest.$ac_ext
+
+done
+# Because of `break', _AC_PREPROC_IFELSE's cleaning code was skipped.
+rm -f conftest.err conftest.$ac_ext
+if $ac_preproc_ok; then :
+
+else
+  { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5
+$as_echo "$as_me: error: in \`$ac_pwd':" >&2;}
+as_fn_error "C preprocessor \"$CPP\" fails sanity check
+See \`config.log' for more details." "$LINENO" 5; }
+fi
+
+ac_ext=c
+ac_cpp='$CPP $CPPFLAGS'
+ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
+ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
+ac_compiler_gnu=$ac_cv_c_compiler_gnu
+
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for grep that handles long lines and -e" >&5
+$as_echo_n "checking for grep that handles long lines and -e... " >&6; }
+if test "${ac_cv_path_GREP+set}" = set; then :
+  $as_echo_n "(cached) " >&6
+else
+  if test -z "$GREP"; then
+  ac_path_GREP_found=false
+  # Loop through the user's path and test for each of PROGNAME-LIST
+  as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH$PATH_SEPARATOR/usr/xpg4/bin
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    for ac_prog in grep ggrep; do
+    for ac_exec_ext in '' $ac_executable_extensions; do
+      ac_path_GREP="$as_dir/$ac_prog$ac_exec_ext"
+      { test -f "$ac_path_GREP" && $as_test_x "$ac_path_GREP"; } || continue
+# Check for GNU ac_path_GREP and select it if it is found.
+  # Check for GNU $ac_path_GREP
+case `"$ac_path_GREP" --version 2>&1` in
+*GNU*)
+  ac_cv_path_GREP="$ac_path_GREP" ac_path_GREP_found=:;;
+*)
+  ac_count=0
+  $as_echo_n 0123456789 >"conftest.in"
+  while :
+  do
+    cat "conftest.in" "conftest.in" >"conftest.tmp"
+    mv "conftest.tmp" "conftest.in"
+    cp "conftest.in" "conftest.nl"
+    $as_echo 'GREP' >> "conftest.nl"
+    "$ac_path_GREP" -e 'GREP$' -e '-(cannot match)-' < "conftest.nl" >"conftest.out" 2>/dev/null || break
+    diff "conftest.out" "conftest.nl" >/dev/null 2>&1 || break
+    as_fn_arith $ac_count + 1 && ac_count=$as_val
+    if test $ac_count -gt ${ac_path_GREP_max-0}; then
+      # Best one so far, save it but keep looking for a better one
+      ac_cv_path_GREP="$ac_path_GREP"
+      ac_path_GREP_max=$ac_count
+    fi
+    # 10*(2^10) chars as input seems more than enough
+    test $ac_count -gt 10 && break
+  done
+  rm -f conftest.in conftest.tmp conftest.nl conftest.out;;
+esac
+
+      $ac_path_GREP_found && break 3
+    done
+  done
+  done
+IFS=$as_save_IFS
+  if test -z "$ac_cv_path_GREP"; then
+    as_fn_error "no acceptable grep could be found in $PATH$PATH_SEPARATOR/usr/xpg4/bin" "$LINENO" 5
+  fi
+else
+  ac_cv_path_GREP=$GREP
+fi
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_path_GREP" >&5
+$as_echo "$ac_cv_path_GREP" >&6; }
+ GREP="$ac_cv_path_GREP"
+
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for egrep" >&5
+$as_echo_n "checking for egrep... " >&6; }
+if test "${ac_cv_path_EGREP+set}" = set; then :
+  $as_echo_n "(cached) " >&6
+else
+  if echo a | $GREP -E '(a|b)' >/dev/null 2>&1
+   then ac_cv_path_EGREP="$GREP -E"
+   else
+     if test -z "$EGREP"; then
+  ac_path_EGREP_found=false
+  # Loop through the user's path and test for each of PROGNAME-LIST
+  as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH$PATH_SEPARATOR/usr/xpg4/bin
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    for ac_prog in egrep; do
+    for ac_exec_ext in '' $ac_executable_extensions; do
+      ac_path_EGREP="$as_dir/$ac_prog$ac_exec_ext"
+      { test -f "$ac_path_EGREP" && $as_test_x "$ac_path_EGREP"; } || continue
+# Check for GNU ac_path_EGREP and select it if it is found.
+  # Check for GNU $ac_path_EGREP
+case `"$ac_path_EGREP" --version 2>&1` in
+*GNU*)
+  ac_cv_path_EGREP="$ac_path_EGREP" ac_path_EGREP_found=:;;
+*)
+  ac_count=0
+  $as_echo_n 0123456789 >"conftest.in"
+  while :
+  do
+    cat "conftest.in" "conftest.in" >"conftest.tmp"
+    mv "conftest.tmp" "conftest.in"
+    cp "conftest.in" "conftest.nl"
+    $as_echo 'EGREP' >> "conftest.nl"
+    "$ac_path_EGREP" 'EGREP$' < "conftest.nl" >"conftest.out" 2>/dev/null || break
+    diff "conftest.out" "conftest.nl" >/dev/null 2>&1 || break
+    as_fn_arith $ac_count + 1 && ac_count=$as_val
+    if test $ac_count -gt ${ac_path_EGREP_max-0}; then
+      # Best one so far, save it but keep looking for a better one
+      ac_cv_path_EGREP="$ac_path_EGREP"
+      ac_path_EGREP_max=$ac_count
+    fi
+    # 10*(2^10) chars as input seems more than enough
+    test $ac_count -gt 10 && break
+  done
+  rm -f conftest.in conftest.tmp conftest.nl conftest.out;;
+esac
+
+      $ac_path_EGREP_found && break 3
+    done
+  done
+  done
+IFS=$as_save_IFS
+  if test -z "$ac_cv_path_EGREP"; then
+    as_fn_error "no acceptable egrep could be found in $PATH$PATH_SEPARATOR/usr/xpg4/bin" "$LINENO" 5
+  fi
+else
+  ac_cv_path_EGREP=$EGREP
+fi
+
+   fi
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_path_EGREP" >&5
+$as_echo "$ac_cv_path_EGREP" >&6; }
+ EGREP="$ac_cv_path_EGREP"
+
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for ANSI C header files" >&5
+$as_echo_n "checking for ANSI C header files... " >&6; }
+if test "${ac_cv_header_stdc+set}" = set; then :
+  $as_echo_n "(cached) " >&6
+else
+  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+#include <stdlib.h>
+#include <stdarg.h>
+#include <string.h>
+#include <float.h>
+
+int
+main ()
+{
+
+  ;
+  return 0;
+}
+_ACEOF
+if ac_fn_c_try_compile "$LINENO"; then :
+  ac_cv_header_stdc=yes
+else
+  ac_cv_header_stdc=no
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+
+if test $ac_cv_header_stdc = yes; then
+  # SunOS 4.x string.h does not declare mem*, contrary to ANSI.
+  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+#include <string.h>
+
+_ACEOF
+if (eval "$ac_cpp conftest.$ac_ext") 2>&5 |
+  $EGREP "memchr" >/dev/null 2>&1; then :
+
+else
+  ac_cv_header_stdc=no
+fi
+rm -f conftest*
+
+fi
+
+if test $ac_cv_header_stdc = yes; then
+  # ISC 2.0.2 stdlib.h does not declare free, contrary to ANSI.
+  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+#include <stdlib.h>
+
+_ACEOF
+if (eval "$ac_cpp conftest.$ac_ext") 2>&5 |
+  $EGREP "free" >/dev/null 2>&1; then :
+
+else
+  ac_cv_header_stdc=no
+fi
+rm -f conftest*
+
+fi
+
+if test $ac_cv_header_stdc = yes; then
+  # /bin/cc in Irix-4.0.5 gets non-ANSI ctype macros unless using -ansi.
+  if test "$cross_compiling" = yes; then :
+  :
+else
+  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+#include <ctype.h>
+#include <stdlib.h>
+#if ((' ' & 0x0FF) == 0x020)
+# define ISLOWER(c) ('a' <= (c) && (c) <= 'z')
+# define TOUPPER(c) (ISLOWER(c) ? 'A' + ((c) - 'a') : (c))
+#else
+# define ISLOWER(c) \
+		   (('a' <= (c) && (c) <= 'i') \
+		     || ('j' <= (c) && (c) <= 'r') \
+		     || ('s' <= (c) && (c) <= 'z'))
+# define TOUPPER(c) (ISLOWER(c) ? ((c) | 0x40) : (c))
+#endif
+
+#define XOR(e, f) (((e) && !(f)) || (!(e) && (f)))
+int
+main ()
+{
+  int i;
+  for (i = 0; i < 256; i++)
+    if (XOR (islower (i), ISLOWER (i))
+	|| toupper (i) != TOUPPER (i))
+      return 2;
+  return 0;
+}
+_ACEOF
+if ac_fn_c_try_run "$LINENO"; then :
+
+else
+  ac_cv_header_stdc=no
+fi
+rm -f core *.core core.conftest.* gmon.out bb.out conftest$ac_exeext \
+  conftest.$ac_objext conftest.beam conftest.$ac_ext
+fi
+
+fi
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_header_stdc" >&5
+$as_echo "$ac_cv_header_stdc" >&6; }
+if test $ac_cv_header_stdc = yes; then
+
+$as_echo "#define STDC_HEADERS 1" >>confdefs.h
+
+fi
 
-# Check whether --enable-sim-hostendian or --disable-sim-hostendian was given.
-if test "${enable_sim_hostendian+set}" = set; then
-  enableval="$enable_sim_hostendian"
-  case "${enableval}" in
+# On IRIX 5.3, sys/types and inttypes.h are conflicting.
+for ac_header in sys/types.h sys/stat.h stdlib.h string.h memory.h strings.h \
+		  inttypes.h stdint.h unistd.h
+do :
+  as_ac_Header=`$as_echo "ac_cv_header_$ac_header" | $as_tr_sh`
+ac_fn_c_check_header_compile "$LINENO" "$ac_header" "$as_ac_Header" "$ac_includes_default
+"
+eval as_val=\$$as_ac_Header
+   if test "x$as_val" = x""yes; then :
+  cat >>confdefs.h <<_ACEOF
+#define `$as_echo "HAVE_$ac_header" | $as_tr_cpp` 1
+_ACEOF
+
+fi
+
+done
+
+
+# Check whether --enable-sim-hostendian was given.
+if test "${enable_sim_hostendian+set}" = set; then :
+  enableval=$enable_sim_hostendian; case "${enableval}" in
   no)	 sim_hostendian="-DWITH_HOST_BYTE_ORDER=0";;
   b*|B*) sim_hostendian="-DWITH_HOST_BYTE_ORDER=BIG_ENDIAN";;
   l*|L*) sim_hostendian="-DWITH_HOST_BYTE_ORDER=LITTLE_ENDIAN";;
-  *)	 { { echo "$as_me:$LINENO: error: \"Unknown value $enableval for --enable-sim-hostendian\"" >&5
-echo "$as_me: error: \"Unknown value $enableval for --enable-sim-hostendian\"" >&2;}
-   { (exit 1); exit 1; }; }; sim_hostendian="";;
+  *)	 as_fn_error "\"Unknown value $enableval for --enable-sim-hostendian\"" "$LINENO" 5; sim_hostendian="";;
 esac
 if test x"$silent" != x"yes" && test x"$sim_hostendian" != x""; then
   echo "Setting hostendian flags = $sim_hostendian" 6>&1
@@ -3052,235 +4194,229 @@ fi
 else
 
 if test "x$cross_compiling" = "xno"; then
-  echo "$as_me:$LINENO: checking whether byte ordering is bigendian" >&5
-echo $ECHO_N "checking whether byte ordering is bigendian... $ECHO_C" >&6
-if test "${ac_cv_c_bigendian+set}" = set; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
-else
-  # See if sys/param.h defines the BYTE_ORDER macro.
-cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h.  */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
+   { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether byte ordering is bigendian" >&5
+$as_echo_n "checking whether byte ordering is bigendian... " >&6; }
+if test "${ac_cv_c_bigendian+set}" = set; then :
+  $as_echo_n "(cached) " >&6
+else
+  ac_cv_c_bigendian=unknown
+    # See if we're dealing with a universal compiler.
+    cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+#ifndef __APPLE_CC__
+	       not a universal capable compiler
+	     #endif
+	     typedef int dummy;
+
+_ACEOF
+if ac_fn_c_try_compile "$LINENO"; then :
+
+	# Check for potential -arch flags.  It is not universal unless
+	# there are at least two -arch flags with different values.
+	ac_arch=
+	ac_prev=
+	for ac_word in $CC $CFLAGS $CPPFLAGS $LDFLAGS; do
+	 if test -n "$ac_prev"; then
+	   case $ac_word in
+	     i?86 | x86_64 | ppc | ppc64)
+	       if test -z "$ac_arch" || test "$ac_arch" = "$ac_word"; then
+		 ac_arch=$ac_word
+	       else
+		 ac_cv_c_bigendian=universal
+		 break
+	       fi
+	       ;;
+	   esac
+	   ac_prev=
+	 elif test "x$ac_word" = "x-arch"; then
+	   ac_prev=arch
+	 fi
+       done
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+    if test $ac_cv_c_bigendian = unknown; then
+      # See if sys/param.h defines the BYTE_ORDER macro.
+      cat confdefs.h - <<_ACEOF >conftest.$ac_ext
 /* end confdefs.h.  */
 #include <sys/types.h>
-#include <sys/param.h>
+	     #include <sys/param.h>
 
 int
 main ()
 {
-#if !BYTE_ORDER || !BIG_ENDIAN || !LITTLE_ENDIAN
- bogus endian macros
-#endif
+#if ! (defined BYTE_ORDER && defined BIG_ENDIAN \
+		     && defined LITTLE_ENDIAN && BYTE_ORDER && BIG_ENDIAN \
+		     && LITTLE_ENDIAN)
+	      bogus endian macros
+	     #endif
 
   ;
   return 0;
 }
 _ACEOF
-rm -f conftest.$ac_objext
-if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
-  (eval $ac_compile) 2>conftest.er1
-  ac_status=$?
-  grep -v '^ *+' conftest.er1 >conftest.err
-  rm -f conftest.er1
-  cat conftest.err >&5
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } &&
-	 { ac_try='test -z "$ac_c_werror_flag"
-			 || test ! -s conftest.err'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; } &&
-	 { ac_try='test -s conftest.$ac_objext'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; }; then
+if ac_fn_c_try_compile "$LINENO"; then :
   # It does; now see whether it defined to BIG_ENDIAN or not.
-cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h.  */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
+	 cat confdefs.h - <<_ACEOF >conftest.$ac_ext
 /* end confdefs.h.  */
 #include <sys/types.h>
-#include <sys/param.h>
+		#include <sys/param.h>
 
 int
 main ()
 {
 #if BYTE_ORDER != BIG_ENDIAN
- not big endian
-#endif
+		 not big endian
+		#endif
 
   ;
   return 0;
 }
 _ACEOF
-rm -f conftest.$ac_objext
-if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
-  (eval $ac_compile) 2>conftest.er1
-  ac_status=$?
-  grep -v '^ *+' conftest.er1 >conftest.err
-  rm -f conftest.er1
-  cat conftest.err >&5
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } &&
-	 { ac_try='test -z "$ac_c_werror_flag"
-			 || test ! -s conftest.err'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; } &&
-	 { ac_try='test -s conftest.$ac_objext'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; }; then
+if ac_fn_c_try_compile "$LINENO"; then :
   ac_cv_c_bigendian=yes
 else
-  echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-ac_cv_c_bigendian=no
+  ac_cv_c_bigendian=no
 fi
-rm -f conftest.err conftest.$ac_objext conftest.$ac_ext
-else
-  echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+    fi
+    if test $ac_cv_c_bigendian = unknown; then
+      # See if <limits.h> defines _LITTLE_ENDIAN or _BIG_ENDIAN (e.g., Solaris).
+      cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+#include <limits.h>
 
-# It does not; compile a test program.
-if test "$cross_compiling" = yes; then
-  # try to guess the endianness by grepping values into an object file
-  ac_cv_c_bigendian=unknown
-  cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h.  */
+int
+main ()
+{
+#if ! (defined _LITTLE_ENDIAN || defined _BIG_ENDIAN)
+	      bogus endian macros
+	     #endif
+
+  ;
+  return 0;
+}
 _ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
+if ac_fn_c_try_compile "$LINENO"; then :
+  # It does; now see whether it defined to _BIG_ENDIAN or not.
+	 cat confdefs.h - <<_ACEOF >conftest.$ac_ext
 /* end confdefs.h.  */
-short ascii_mm[] = { 0x4249, 0x4765, 0x6E44, 0x6961, 0x6E53, 0x7953, 0 };
-short ascii_ii[] = { 0x694C, 0x5454, 0x656C, 0x6E45, 0x6944, 0x6E61, 0 };
-void _ascii () { char *s = (char *) ascii_mm; s = (char *) ascii_ii; }
-short ebcdic_ii[] = { 0x89D3, 0xE3E3, 0x8593, 0x95C5, 0x89C4, 0x9581, 0 };
-short ebcdic_mm[] = { 0xC2C9, 0xC785, 0x95C4, 0x8981, 0x95E2, 0xA8E2, 0 };
-void _ebcdic () { char *s = (char *) ebcdic_mm; s = (char *) ebcdic_ii; }
+#include <limits.h>
+
 int
 main ()
 {
- _ascii (); _ebcdic ();
+#ifndef _BIG_ENDIAN
+		 not big endian
+		#endif
+
   ;
   return 0;
 }
 _ACEOF
-rm -f conftest.$ac_objext
-if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
-  (eval $ac_compile) 2>conftest.er1
-  ac_status=$?
-  grep -v '^ *+' conftest.er1 >conftest.err
-  rm -f conftest.er1
-  cat conftest.err >&5
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } &&
-	 { ac_try='test -z "$ac_c_werror_flag"
-			 || test ! -s conftest.err'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; } &&
-	 { ac_try='test -s conftest.$ac_objext'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; }; then
-  if grep BIGenDianSyS conftest.$ac_objext >/dev/null ; then
+if ac_fn_c_try_compile "$LINENO"; then :
   ac_cv_c_bigendian=yes
+else
+  ac_cv_c_bigendian=no
 fi
-if grep LiTTleEnDian conftest.$ac_objext >/dev/null ; then
-  if test "$ac_cv_c_bigendian" = unknown; then
-    ac_cv_c_bigendian=no
-  else
-    # finding both strings is unlikely to happen, but who knows?
-    ac_cv_c_bigendian=unknown
-  fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
 fi
-else
-  echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+    fi
+    if test $ac_cv_c_bigendian = unknown; then
+      # Compile a test program.
+      if test "$cross_compiling" = yes; then :
+  # Try to guess by grepping values from an object file.
+	 cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+short int ascii_mm[] =
+		  { 0x4249, 0x4765, 0x6E44, 0x6961, 0x6E53, 0x7953, 0 };
+		short int ascii_ii[] =
+		  { 0x694C, 0x5454, 0x656C, 0x6E45, 0x6944, 0x6E61, 0 };
+		int use_ascii (int i) {
+		  return ascii_mm[i] + ascii_ii[i];
+		}
+		short int ebcdic_ii[] =
+		  { 0x89D3, 0xE3E3, 0x8593, 0x95C5, 0x89C4, 0x9581, 0 };
+		short int ebcdic_mm[] =
+		  { 0xC2C9, 0xC785, 0x95C4, 0x8981, 0x95E2, 0xA8E2, 0 };
+		int use_ebcdic (int i) {
+		  return ebcdic_mm[i] + ebcdic_ii[i];
+		}
+		extern int foo;
 
-fi
-rm -f conftest.err conftest.$ac_objext conftest.$ac_ext
-else
-  cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h.  */
+int
+main ()
+{
+return use_ascii (foo) == use_ebcdic (foo);
+  ;
+  return 0;
+}
 _ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
+if ac_fn_c_try_compile "$LINENO"; then :
+  if grep BIGenDianSyS conftest.$ac_objext >/dev/null; then
+	      ac_cv_c_bigendian=yes
+	    fi
+	    if grep LiTTleEnDian conftest.$ac_objext >/dev/null ; then
+	      if test "$ac_cv_c_bigendian" = unknown; then
+		ac_cv_c_bigendian=no
+	      else
+		# finding both strings is unlikely to happen, but who knows?
+		ac_cv_c_bigendian=unknown
+	      fi
+	    fi
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+else
+  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
 /* end confdefs.h.  */
+$ac_includes_default
 int
 main ()
 {
-  /* Are we little or big endian?  From Harbison&Steele.  */
-  union
-  {
-    long l;
-    char c[sizeof (long)];
-  } u;
-  u.l = 1;
-  exit (u.c[sizeof (long) - 1] == 1);
+
+	     /* Are we little or big endian?  From Harbison&Steele.  */
+	     union
+	     {
+	       long int l;
+	       char c[sizeof (long int)];
+	     } u;
+	     u.l = 1;
+	     return u.c[sizeof (long int) - 1] == 1;
+
+  ;
+  return 0;
 }
 _ACEOF
-rm -f conftest$ac_exeext
-if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
-  (eval $ac_link) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } && { ac_try='./conftest$ac_exeext'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; }; then
+if ac_fn_c_try_run "$LINENO"; then :
   ac_cv_c_bigendian=no
 else
-  echo "$as_me: program exited with status $ac_status" >&5
-echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-( exit $ac_status )
-ac_cv_c_bigendian=yes
-fi
-rm -f core *.core gmon.out bb.out conftest$ac_exeext conftest.$ac_objext conftest.$ac_ext
+  ac_cv_c_bigendian=yes
 fi
+rm -f core *.core core.conftest.* gmon.out bb.out conftest$ac_exeext \
+  conftest.$ac_objext conftest.beam conftest.$ac_ext
 fi
-rm -f conftest.err conftest.$ac_objext conftest.$ac_ext
+
+    fi
 fi
-echo "$as_me:$LINENO: result: $ac_cv_c_bigendian" >&5
-echo "${ECHO_T}$ac_cv_c_bigendian" >&6
-case $ac_cv_c_bigendian in
-  yes)
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_c_bigendian" >&5
+$as_echo "$ac_cv_c_bigendian" >&6; }
+ case $ac_cv_c_bigendian in #(
+   yes)
+     $as_echo "#define WORDS_BIGENDIAN 1" >>confdefs.h
+;; #(
+   no)
+      ;; #(
+   universal)
 
-cat >>confdefs.h <<\_ACEOF
-#define WORDS_BIGENDIAN 1
-_ACEOF
- ;;
-  no)
-     ;;
-  *)
-    { { echo "$as_me:$LINENO: error: unknown endianness
-presetting ac_cv_c_bigendian=no (or yes) will help" >&5
-echo "$as_me: error: unknown endianness
-presetting ac_cv_c_bigendian=no (or yes) will help" >&2;}
-   { (exit 1); exit 1; }; } ;;
-esac
+$as_echo "#define AC_APPLE_UNIVERSAL_BUILD 1" >>confdefs.h
+
+     ;; #(
+   *)
+     as_fn_error "unknown endianness
+ presetting ac_cv_c_bigendian=no (or yes) will help" "$LINENO" 5 ;;
+ esac
 
   if test $ac_cv_c_bigendian = yes; then
     sim_hostendian="-DWITH_HOST_BYTE_ORDER=BIG_ENDIAN"
@@ -3290,12 +4426,12 @@ esac
 else
   sim_hostendian="-DWITH_HOST_BYTE_ORDER=0"
 fi
-fi;
+fi
 
-# Check whether --enable-sim-icache or --disable-sim-icache was given.
-if test "${enable_sim_icache+set}" = set; then
-  enableval="$enable_sim_icache"
-  icache="-R"
+
+# Check whether --enable-sim-icache was given.
+if test "${enable_sim_icache+set}" = set; then :
+  enableval=$enable_sim_icache; icache="-R"
  case "${enableval}" in
   yes)		icache="1024"; sim_icache="-I $icache";;
   no)		sim_icache="-R";;
@@ -3307,9 +4443,7 @@ if test "${enable_sim_icache+set}" = set; then
          semantic)	sim_icache="${sim_icache}C";;
 	 insn)		sim_icache="${sim_icache}S";;
 	 0*|1*|2*|3*|4*|5*|6*|7*|8*|9*)	icache=$x;;
-         *)		{ { echo "$as_me:$LINENO: error: \"Unknown value $x for --enable-sim-icache\"" >&5
-echo "$as_me: error: \"Unknown value $x for --enable-sim-icache\"" >&2;}
-   { (exit 1); exit 1; }; }; sim_icache="";;
+         *)		as_fn_error "\"Unknown value $x for --enable-sim-icache\"" "$LINENO" 5; sim_icache="";;
        esac
      done
      sim_icache="${sim_icache}I $icache";;
@@ -3322,12 +4456,12 @@ else
 if test x"$silent" != x"yes"; then
   echo "Setting instruction cache size to 1024 ($sim_icache)"
 fi
-fi;
+fi
 
-# Check whether --enable-sim-inline or --disable-sim-inline was given.
-if test "${enable_sim_inline+set}" = set; then
-  enableval="$enable_sim_inline"
-  sim_inline=""
+
+# Check whether --enable-sim-inline was given.
+if test "${enable_sim_inline+set}" = set; then :
+  enableval=$enable_sim_inline; sim_inline=""
 case "$enableval" in
   no)		sim_inline="-DDEFAULT_INLINE=0";;
   0)		sim_inline="-DDEFAULT_INLINE=0";;
@@ -3360,17 +4494,15 @@ else
 else
   sim_inline=""
 fi
-fi;
+fi
 
-# Check whether --enable-sim-jump or --disable-sim-jump was given.
-if test "${enable_sim_jump+set}" = set; then
-  enableval="$enable_sim_jump"
-  case "${enableval}" in
+
+# Check whether --enable-sim-jump was given.
+if test "${enable_sim_jump+set}" = set; then :
+  enableval=$enable_sim_jump; case "${enableval}" in
   yes)	sim_jump="-J";;
   no)	sim_jump="";;
-  *)	{ { echo "$as_me:$LINENO: error: \"--enable-sim-jump does not take a value\"" >&5
-echo "$as_me: error: \"--enable-sim-jump does not take a value\"" >&2;}
-   { (exit 1); exit 1; }; }; sim_jump="";;
+  *)	as_fn_error "\"--enable-sim-jump does not take a value\"" "$LINENO" 5; sim_jump="";;
 esac
 if test x"$silent" != x"yes" && test x"$sim_jump" != x""; then
   echo "Setting jump flag = $sim_jump" 6>&1
@@ -3380,32 +4512,28 @@ else
 if test x"$silent" != x"yes"; then
   echo "Setting jump flag = $sim_jump" 6>&1
 fi
-fi;
+fi
 
-# Check whether --enable-sim-line-nr or --disable-sim-line-nr was given.
-if test "${enable_sim_line_nr+set}" = set; then
-  enableval="$enable_sim_line_nr"
-  case "${enableval}" in
+
+# Check whether --enable-sim-line-nr was given.
+if test "${enable_sim_line_nr+set}" = set; then :
+  enableval=$enable_sim_line_nr; case "${enableval}" in
   yes)	sim_line_nr="";;
   no)	sim_line_nr="-L";;
-  *)	{ { echo "$as_me:$LINENO: error: \"--enable-sim-line-nr does not take a value\"" >&5
-echo "$as_me: error: \"--enable-sim-line-nr does not take a value\"" >&2;}
-   { (exit 1); exit 1; }; }; sim_line_nr="";;
+  *)	as_fn_error "\"--enable-sim-line-nr does not take a value\"" "$LINENO" 5; sim_line_nr="";;
 esac
 if test x"$silent" != x"yes" && test x"$sim_line_nr" != x""; then
   echo "Setting warning flags = $sim_line_nr" 6>&1
 fi
 else
   sim_line_nr=""
-fi;
-
-# Check whether --enable-sim-model or --disable-sim-model was given.
-if test "${enable_sim_model+set}" = set; then
-  enableval="$enable_sim_model"
-  case "${enableval}" in
-  yes|no)	{ { echo "$as_me:$LINENO: error: \"No value supplied for --enable-sim-model=model\"" >&5
-echo "$as_me: error: \"No value supplied for --enable-sim-model=model\"" >&2;}
-   { (exit 1); exit 1; }; };;
+fi
+
+
+# Check whether --enable-sim-model was given.
+if test "${enable_sim_model+set}" = set; then :
+  enableval=$enable_sim_model; case "${enableval}" in
+  yes|no)	as_fn_error "\"No value supplied for --enable-sim-model=model\"" "$LINENO" 5;;
   *)		sim_model="-DWITH_MODEL=${enableval}";;
 esac
 if test x"$silent" != x"yes" && test x"$sim_model" != x""; then
@@ -3413,59 +4541,51 @@ if test x"$silent" != x"yes" && test x"$sim_model" != x""; then
 fi
 else
   sim_model=""
-fi;
+fi
 
-# Check whether --enable-sim-model-issue or --disable-sim-model-issue was given.
-if test "${enable_sim_model_issue+set}" = set; then
-  enableval="$enable_sim_model_issue"
-  case "${enableval}" in
+
+# Check whether --enable-sim-model-issue was given.
+if test "${enable_sim_model_issue+set}" = set; then :
+  enableval=$enable_sim_model_issue; case "${enableval}" in
   yes)	sim_model_issue="-DWITH_MODEL_ISSUE=MODEL_ISSUE_PROCESS";;
   no)	sim_model_issue="-DWITH_MODEL_ISSUE=MODEL_ISSUE_IGNORE";;
-  *)	{ { echo "$as_me:$LINENO: error: \"--enable-sim-model-issue does not take a value\"" >&5
-echo "$as_me: error: \"--enable-sim-model-issue does not take a value\"" >&2;}
-   { (exit 1); exit 1; }; }; sim_model_issue="";;
+  *)	as_fn_error "\"--enable-sim-model-issue does not take a value\"" "$LINENO" 5; sim_model_issue="";;
 esac
 if test x"$silent" != x"yes"; then
   echo "Setting model-issue flags = $sim_model_issue" 6>&1
 fi
 else
   sim_model_issue=""
-fi;
+fi
 
-# Check whether --enable-sim-monitor or --disable-sim-monitor was given.
-if test "${enable_sim_monitor+set}" = set; then
-  enableval="$enable_sim_monitor"
-  case "${enableval}" in
+
+# Check whether --enable-sim-monitor was given.
+if test "${enable_sim_monitor+set}" = set; then :
+  enableval=$enable_sim_monitor; case "${enableval}" in
   yes)		sim_monitor="-DWITH_MON='MONITOR_INSTRUCTION_ISSUE | MONITOR_LOAD_STORE_UNIT'";;
   no)		sim_monitor="-DWITH_MON=0";;
   instruction)	sim_monitor="-DWITH_MON=MONITOR_INSTRUCTION_ISSUE";;
   memory)	sim_monitor="-DWITH_MON=MONITOR_LOAD_STORE_UNIT";;
-  *)		{ { echo "$as_me:$LINENO: error: \"Unknown value $enableval passed to --enable-sim-mon\"" >&5
-echo "$as_me: error: \"Unknown value $enableval passed to --enable-sim-mon\"" >&2;}
-   { (exit 1); exit 1; }; }; sim_env="";;
+  *)		as_fn_error "\"Unknown value $enableval passed to --enable-sim-mon\"" "$LINENO" 5; sim_env="";;
 esac
 if test x"$silent" != x"yes" && test x"$sim_monitor" != x""; then
   echo "Setting monitor flags = $sim_monitor" 6>&1
 fi
 else
   sim_monitor=""
-fi;
-
-# Check whether --enable-sim-opcode or --disable-sim-opcode was given.
-if test "${enable_sim_opcode+set}" = set; then
-  enableval="$enable_sim_opcode"
-  case "${enableval}" in
-  yes|no)	{ { echo "$as_me:$LINENO: error: \"No value supplied for --enable-sim-opcode=file\"" >&5
-echo "$as_me: error: \"No value supplied for --enable-sim-opcode=file\"" >&2;}
-   { (exit 1); exit 1; }; };;
+fi
+
+
+# Check whether --enable-sim-opcode was given.
+if test "${enable_sim_opcode+set}" = set; then :
+  enableval=$enable_sim_opcode; case "${enableval}" in
+  yes|no)	as_fn_error "\"No value supplied for --enable-sim-opcode=file\"" "$LINENO" 5;;
   *)		if test -f "${srcdir}/${enableval}"; then
 		  sim_opcode="${enableval}"
 		elif test -f "${srcdir}/dc-${enableval}"; then
 		  sim_opcode="dc-${enableval}"
 		else
-		  { { echo "$as_me:$LINENO: error: \"File $enableval is not an opcode rules file\"" >&5
-echo "$as_me: error: \"File $enableval is not an opcode rules file\"" >&2;}
-   { (exit 1); exit 1; }; };
+		  as_fn_error "\"File $enableval is not an opcode rules file\"" "$LINENO" 5;
 		  sim_opcode="dc-complex"
 		fi;;
 esac
@@ -3477,17 +4597,15 @@ else
 if test x"$silent" != x"yes"; then
   echo "Setting opcode flags = $sim_opcode"
 fi
-fi;
+fi
 
-# Check whether --enable-sim-packages or --disable-sim-packages was given.
-if test "${enable_sim_packages+set}" = set; then
-  enableval="$enable_sim_packages"
-  packages=disklabel
+
+# Check whether --enable-sim-packages was given.
+if test "${enable_sim_packages+set}" = set; then :
+  enableval=$enable_sim_packages; packages=disklabel
 case "${enableval}" in
   yes)	;;
-  no)	{ { echo "$as_me:$LINENO: error: \"List of packages must be specified for --enable-sim-packages\"" >&5
-echo "$as_me: error: \"List of packages must be specified for --enable-sim-packages\"" >&2;}
-   { (exit 1); exit 1; }; }; packages="";;
+  no)	as_fn_error "\"List of packages must be specified for --enable-sim-packages\"" "$LINENO" 5; packages="";;
   ,*)   packages="${packages}${enableval}";;
   *,)   packages="${enableval}${packages}";;
   *)	packages="${enableval}"'';;
@@ -3504,47 +4622,43 @@ sim_pk_obj=`echo $sim_pk_src | sed -e 's/\.c/.o/g'`
 if test x"$silent" != x"yes"; then
   echo "Setting packages to $sim_pk_src, $sim_pk_obj"
 fi
-fi;
+fi
 
-# Check whether --enable-sim-regparm or --disable-sim-regparm was given.
-if test "${enable_sim_regparm+set}" = set; then
-  enableval="$enable_sim_regparm"
-  case "${enableval}" in
+
+# Check whether --enable-sim-regparm was given.
+if test "${enable_sim_regparm+set}" = set; then :
+  enableval=$enable_sim_regparm; case "${enableval}" in
   0*|1*|2*|3*|4*|5*|6*|7*|8*|9*) sim_regparm="-DWITH_REGPARM=${enableval}";;
   no)                            sim_regparm="" ;;
   yes)                           sim_regparm="-DWITH_REGPARM=3";;
-  *)   { { echo "$as_me:$LINENO: error: \"Unknown value $enableval for --enable-sim-regparm\"" >&5
-echo "$as_me: error: \"Unknown value $enableval for --enable-sim-regparm\"" >&2;}
-   { (exit 1); exit 1; }; }; sim_regparm="";;
+  *)   as_fn_error "\"Unknown value $enableval for --enable-sim-regparm\"" "$LINENO" 5; sim_regparm="";;
 esac
 if test x"$silent" != x"yes" && test x"$sim_regparm" != x""; then
   echo "Setting regparm flags = $sim_regparm" 6>&1
 fi
 else
   sim_regparm=""
-fi;
+fi
 
-# Check whether --enable-sim-reserved-bits or --disable-sim-reserved-bits was given.
-if test "${enable_sim_reserved_bits+set}" = set; then
-  enableval="$enable_sim_reserved_bits"
-  case "${enableval}" in
+
+# Check whether --enable-sim-reserved-bits was given.
+if test "${enable_sim_reserved_bits+set}" = set; then :
+  enableval=$enable_sim_reserved_bits; case "${enableval}" in
   yes)	sim_reserved="-DWITH_RESERVED_BITS=1";;
   no)	sim_reserved="-DWITH_RESERVED_BITS=0";;
-  *)	{ { echo "$as_me:$LINENO: error: \"--enable-sim-reserved-bits does not take a value\"" >&5
-echo "$as_me: error: \"--enable-sim-reserved-bits does not take a value\"" >&2;}
-   { (exit 1); exit 1; }; }; sim_reserved="";;
+  *)	as_fn_error "\"--enable-sim-reserved-bits does not take a value\"" "$LINENO" 5; sim_reserved="";;
 esac
 if test x"$silent" != x"yes" && test x"$sim_reserved" != x""; then
   echo "Setting reserved flags = $sim_reserved" 6>&1
 fi
 else
   sim_reserved=""
-fi;
+fi
 
-# Check whether --enable-sim-smp or --disable-sim-smp was given.
-if test "${enable_sim_smp+set}" = set; then
-  enableval="$enable_sim_smp"
-  case "${enableval}" in
+
+# Check whether --enable-sim-smp was given.
+if test "${enable_sim_smp+set}" = set; then :
+  enableval=$enable_sim_smp; case "${enableval}" in
   yes)	sim_smp="-DWITH_SMP=5" ; sim_igen_smp="-N 5";;
   no)	sim_smp="-DWITH_SMP=0" ; sim_igen_smp="-N 0";;
   *)	sim_smp="-DWITH_SMP=$enableval" ; sim_igen_smp="-N $enableval";;
@@ -3557,52 +4671,46 @@ else
 if test x"$silent" != x"yes"; then
   echo "Setting smp flags = $sim_smp" 6>&1
 fi
-fi;
+fi
 
-# Check whether --enable-sim-stdcall or --disable-sim-stdcall was given.
-if test "${enable_sim_stdcall+set}" = set; then
-  enableval="$enable_sim_stdcall"
-  case "${enableval}" in
+
+# Check whether --enable-sim-stdcall was given.
+if test "${enable_sim_stdcall+set}" = set; then :
+  enableval=$enable_sim_stdcall; case "${enableval}" in
   no)		sim_stdcall="" ;;
   std*)		sim_stdcall="-DWITH_STDCALL=1";;
   yes)		sim_stdcall="-DWITH_STDCALL=1";;
-  *)   { { echo "$as_me:$LINENO: error: \"Unknown value $enableval for --enable-sim-stdcall\"" >&5
-echo "$as_me: error: \"Unknown value $enableval for --enable-sim-stdcall\"" >&2;}
-   { (exit 1); exit 1; }; }; sim_stdcall="";;
+  *)   as_fn_error "\"Unknown value $enableval for --enable-sim-stdcall\"" "$LINENO" 5; sim_stdcall="";;
 esac
 if test x"$silent" != x"yes" && test x"$sim_stdcall" != x""; then
   echo "Setting function call flags = $sim_stdcall" 6>&1
 fi
 else
   sim_stdcall=""
-fi;
+fi
+
 
-# Check whether --enable-sim-stdio or --disable-sim-stdio was given.
-if test "${enable_sim_stdio+set}" = set; then
-  enableval="$enable_sim_stdio"
-  case "${enableval}" in
+# Check whether --enable-sim-stdio was given.
+if test "${enable_sim_stdio+set}" = set; then :
+  enableval=$enable_sim_stdio; case "${enableval}" in
   yes)	sim_stdio="-DWITH_STDIO=DO_USE_STDIO";;
   no)	sim_stdio="-DWITH_STDIO=DONT_USE_STDIO";;
-  *)	{ { echo "$as_me:$LINENO: error: \"Unknown value $enableval passed to --enable-sim-stdio\"" >&5
-echo "$as_me: error: \"Unknown value $enableval passed to --enable-sim-stdio\"" >&2;}
-   { (exit 1); exit 1; }; }; sim_stdio="";;
+  *)	as_fn_error "\"Unknown value $enableval passed to --enable-sim-stdio\"" "$LINENO" 5; sim_stdio="";;
 esac
 if test x"$silent" != x"yes" && test x"$sim_stdio" != x""; then
   echo "Setting stdio flags = $sim_stdio" 6>&1
 fi
 else
   sim_stdio=""
-fi;
+fi
+
 
-# Check whether --enable-sim-switch or --disable-sim-switch was given.
-if test "${enable_sim_switch+set}" = set; then
-  enableval="$enable_sim_switch"
-  case "${enableval}" in
+# Check whether --enable-sim-switch was given.
+if test "${enable_sim_switch+set}" = set; then :
+  enableval=$enable_sim_switch; case "${enableval}" in
   yes)	sim_switch="-s";;
   no)	sim_switch="";;
-  *)	{ { echo "$as_me:$LINENO: error: \"--enable-sim-switch does not take a value\"" >&5
-echo "$as_me: error: \"--enable-sim-switch does not take a value\"" >&2;}
-   { (exit 1); exit 1; }; }; sim_switch="";;
+  *)	as_fn_error "\"--enable-sim-switch does not take a value\"" "$LINENO" 5; sim_switch="";;
 esac
 if test x"$silent" != x"yes" && test x"$sim_switch" != x""; then
   echo "Setting switch flags = $sim_switch" 6>&1
@@ -3612,46 +4720,42 @@ else
 if test x"$silent" != x"yes"; then
   echo "Setting switch flags = $sim_switch" 6>&1
 fi
-fi;
+fi
+
 
-# Check whether --enable-sim-timebase or --disable-sim-timebase was given.
-if test "${enable_sim_timebase+set}" = set; then
-  enableval="$enable_sim_timebase"
-  case "${enableval}" in
+# Check whether --enable-sim-timebase was given.
+if test "${enable_sim_timebase+set}" = set; then :
+  enableval=$enable_sim_timebase; case "${enableval}" in
   yes)	sim_timebase="-DWITH_TIME_BASE=1";;
   no)	sim_timebase="-DWITH_TIME_BASE=0";;
-  *)	{ { echo "$as_me:$LINENO: error: \"--enable-sim-timebase does not take a value\"" >&5
-echo "$as_me: error: \"--enable-sim-timebase does not take a value\"" >&2;}
-   { (exit 1); exit 1; }; }; sim_timebase="";;
+  *)	as_fn_error "\"--enable-sim-timebase does not take a value\"" "$LINENO" 5; sim_timebase="";;
 esac
 if test x"$silent" != x"yes" && test x"$sim_timebase" != x""; then
   echo "Setting timebase flags = $sim_timebase" 6>&1
 fi
 else
   sim_timebase=""
-fi;
+fi
 
-# Check whether --enable-sim-trace or --disable-sim-trace was given.
-if test "${enable_sim_trace+set}" = set; then
-  enableval="$enable_sim_trace"
-  case "${enableval}" in
+
+# Check whether --enable-sim-trace was given.
+if test "${enable_sim_trace+set}" = set; then :
+  enableval=$enable_sim_trace; case "${enableval}" in
   yes)	sim_trace="-DWITH_TRACE=1";;
   no)	sim_trace="-DWITH_TRACE=0";;
-  *)	{ { echo "$as_me:$LINENO: error: \"--enable-sim-trace does not take a value\"" >&5
-echo "$as_me: error: \"--enable-sim-trace does not take a value\"" >&2;}
-   { (exit 1); exit 1; }; }; sim_trace="";;
+  *)	as_fn_error "\"--enable-sim-trace does not take a value\"" "$LINENO" 5; sim_trace="";;
 esac
 if test x"$silent" != x"yes" && test x"$sim_trace" != x""; then
   echo "Setting trace flags = $sim_trace" 6>&1
 fi
 else
   sim_trace=""
-fi;
+fi
 
-# Check whether --enable-sim-warnings or --disable-sim-warnings was given.
-if test "${enable_sim_warnings+set}" = set; then
-  enableval="$enable_sim_warnings"
-  case "${enableval}" in
+
+# Check whether --enable-sim-warnings was given.
+if test "${enable_sim_warnings+set}" = set; then :
+  enableval=$enable_sim_warnings; case "${enableval}" in
   yes)	sim_warnings="-Werror -Wall -Wpointer-arith -Wmissing-prototypes -Wmissing-declarations ";;
   no)	sim_warnings="-w";;
   *)	sim_warnings=`echo "${enableval}" | sed -e "s/,/ /g"`;;
@@ -3661,12 +4765,12 @@ if test x"$silent" != x"yes" && test x"$sim_warnings" != x""; then
 fi
 else
   sim_warnings=""
-fi;
+fi
+
 
-# Check whether --enable-sim-xor-endian or --disable-sim-xor-endian was given.
-if test "${enable_sim_xor_endian+set}" = set; then
-  enableval="$enable_sim_xor_endian"
-  case "${enableval}" in
+# Check whether --enable-sim-xor-endian was given.
+if test "${enable_sim_xor_endian+set}" = set; then :
+  enableval=$enable_sim_xor_endian; case "${enableval}" in
   yes)	sim_xor_endian="-DWITH_XOR_ENDIAN=8";;
   no)	sim_xor_endian="-DWITH_XOR_ENDIAN=0";;
   *)	sim_xor_endian="-DWITH_XOR_ENDIAN=$enableval";;
@@ -3676,35 +4780,31 @@ if test x"$silent" != x"yes" && test x"$sim_xor_endian" != x""; then
 fi
 else
   sim_xor_endian=""
-fi;
+fi
+
 
 
 
-# Check whether --with-pkgversion or --without-pkgversion was given.
-if test "${with_pkgversion+set}" = set; then
-  withval="$with_pkgversion"
-  case "$withval" in
-      yes) { { echo "$as_me:$LINENO: error: package version not specified" >&5
-echo "$as_me: error: package version not specified" >&2;}
-   { (exit 1); exit 1; }; } ;;
+# Check whether --with-pkgversion was given.
+if test "${with_pkgversion+set}" = set; then :
+  withval=$with_pkgversion; case "$withval" in
+      yes) as_fn_error "package version not specified" "$LINENO" 5 ;;
       no)  PKGVERSION= ;;
       *)   PKGVERSION="($withval) " ;;
      esac
 else
   PKGVERSION="(GDB) "
 
-fi;
+fi
+
 
 
 
 
-# Check whether --with-bugurl or --without-bugurl was given.
-if test "${with_bugurl+set}" = set; then
-  withval="$with_bugurl"
-  case "$withval" in
-      yes) { { echo "$as_me:$LINENO: error: bug URL not specified" >&5
-echo "$as_me: error: bug URL not specified" >&2;}
-   { (exit 1); exit 1; }; } ;;
+# Check whether --with-bugurl was given.
+if test "${with_bugurl+set}" = set; then :
+  withval=$with_bugurl; case "$withval" in
+      yes) as_fn_error "bug URL not specified" "$LINENO" 5 ;;
       no)  BUGURL=
 	   ;;
       *)   BUGURL="$withval"
@@ -3713,7 +4813,8 @@ echo "$as_me: error: bug URL not specified" >&2;}
 else
   BUGURL="http://www.gnu.org/software/gdb/bugs/"
 
-fi;
+fi
+
   case ${BUGURL} in
   "")
     REPORT_BUGS_TO=
@@ -3739,79 +4840,107 @@ _ACEOF
 
 
 # Make sure we can run config.sub.
-$ac_config_sub sun4 >/dev/null 2>&1 ||
-  { { echo "$as_me:$LINENO: error: cannot run $ac_config_sub" >&5
-echo "$as_me: error: cannot run $ac_config_sub" >&2;}
-   { (exit 1); exit 1; }; }
-
-echo "$as_me:$LINENO: checking build system type" >&5
-echo $ECHO_N "checking build system type... $ECHO_C" >&6
-if test "${ac_cv_build+set}" = set; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
-else
-  ac_cv_build_alias=$build_alias
-test -z "$ac_cv_build_alias" &&
-  ac_cv_build_alias=`$ac_config_guess`
-test -z "$ac_cv_build_alias" &&
-  { { echo "$as_me:$LINENO: error: cannot guess build type; you must specify one" >&5
-echo "$as_me: error: cannot guess build type; you must specify one" >&2;}
-   { (exit 1); exit 1; }; }
-ac_cv_build=`$ac_config_sub $ac_cv_build_alias` ||
-  { { echo "$as_me:$LINENO: error: $ac_config_sub $ac_cv_build_alias failed" >&5
-echo "$as_me: error: $ac_config_sub $ac_cv_build_alias failed" >&2;}
-   { (exit 1); exit 1; }; }
-
-fi
-echo "$as_me:$LINENO: result: $ac_cv_build" >&5
-echo "${ECHO_T}$ac_cv_build" >&6
+$SHELL "$ac_aux_dir/config.sub" sun4 >/dev/null 2>&1 ||
+  as_fn_error "cannot run $SHELL $ac_aux_dir/config.sub" "$LINENO" 5
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking build system type" >&5
+$as_echo_n "checking build system type... " >&6; }
+if test "${ac_cv_build+set}" = set; then :
+  $as_echo_n "(cached) " >&6
+else
+  ac_build_alias=$build_alias
+test "x$ac_build_alias" = x &&
+  ac_build_alias=`$SHELL "$ac_aux_dir/config.guess"`
+test "x$ac_build_alias" = x &&
+  as_fn_error "cannot guess build type; you must specify one" "$LINENO" 5
+ac_cv_build=`$SHELL "$ac_aux_dir/config.sub" $ac_build_alias` ||
+  as_fn_error "$SHELL $ac_aux_dir/config.sub $ac_build_alias failed" "$LINENO" 5
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_build" >&5
+$as_echo "$ac_cv_build" >&6; }
+case $ac_cv_build in
+*-*-*) ;;
+*) as_fn_error "invalid value of canonical build" "$LINENO" 5;;
+esac
 build=$ac_cv_build
-build_cpu=`echo $ac_cv_build | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\1/'`
-build_vendor=`echo $ac_cv_build | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\2/'`
-build_os=`echo $ac_cv_build | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'`
+ac_save_IFS=$IFS; IFS='-'
+set x $ac_cv_build
+shift
+build_cpu=$1
+build_vendor=$2
+shift; shift
+# Remember, the first character of IFS is used to create $*,
+# except with old shells:
+build_os=$*
+IFS=$ac_save_IFS
+case $build_os in *\ *) build_os=`echo "$build_os" | sed 's/ /-/g'`;; esac
 
 
-echo "$as_me:$LINENO: checking host system type" >&5
-echo $ECHO_N "checking host system type... $ECHO_C" >&6
-if test "${ac_cv_host+set}" = set; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking host system type" >&5
+$as_echo_n "checking host system type... " >&6; }
+if test "${ac_cv_host+set}" = set; then :
+  $as_echo_n "(cached) " >&6
+else
+  if test "x$host_alias" = x; then
+  ac_cv_host=$ac_cv_build
 else
-  ac_cv_host_alias=$host_alias
-test -z "$ac_cv_host_alias" &&
-  ac_cv_host_alias=$ac_cv_build_alias
-ac_cv_host=`$ac_config_sub $ac_cv_host_alias` ||
-  { { echo "$as_me:$LINENO: error: $ac_config_sub $ac_cv_host_alias failed" >&5
-echo "$as_me: error: $ac_config_sub $ac_cv_host_alias failed" >&2;}
-   { (exit 1); exit 1; }; }
+  ac_cv_host=`$SHELL "$ac_aux_dir/config.sub" $host_alias` ||
+    as_fn_error "$SHELL $ac_aux_dir/config.sub $host_alias failed" "$LINENO" 5
+fi
 
 fi
-echo "$as_me:$LINENO: result: $ac_cv_host" >&5
-echo "${ECHO_T}$ac_cv_host" >&6
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_host" >&5
+$as_echo "$ac_cv_host" >&6; }
+case $ac_cv_host in
+*-*-*) ;;
+*) as_fn_error "invalid value of canonical host" "$LINENO" 5;;
+esac
 host=$ac_cv_host
-host_cpu=`echo $ac_cv_host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\1/'`
-host_vendor=`echo $ac_cv_host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\2/'`
-host_os=`echo $ac_cv_host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'`
+ac_save_IFS=$IFS; IFS='-'
+set x $ac_cv_host
+shift
+host_cpu=$1
+host_vendor=$2
+shift; shift
+# Remember, the first character of IFS is used to create $*,
+# except with old shells:
+host_os=$*
+IFS=$ac_save_IFS
+case $host_os in *\ *) host_os=`echo "$host_os" | sed 's/ /-/g'`;; esac
 
 
-echo "$as_me:$LINENO: checking target system type" >&5
-echo $ECHO_N "checking target system type... $ECHO_C" >&6
-if test "${ac_cv_target+set}" = set; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking target system type" >&5
+$as_echo_n "checking target system type... " >&6; }
+if test "${ac_cv_target+set}" = set; then :
+  $as_echo_n "(cached) " >&6
+else
+  if test "x$target_alias" = x; then
+  ac_cv_target=$ac_cv_host
 else
-  ac_cv_target_alias=$target_alias
-test "x$ac_cv_target_alias" = "x" &&
-  ac_cv_target_alias=$ac_cv_host_alias
-ac_cv_target=`$ac_config_sub $ac_cv_target_alias` ||
-  { { echo "$as_me:$LINENO: error: $ac_config_sub $ac_cv_target_alias failed" >&5
-echo "$as_me: error: $ac_config_sub $ac_cv_target_alias failed" >&2;}
-   { (exit 1); exit 1; }; }
+  ac_cv_target=`$SHELL "$ac_aux_dir/config.sub" $target_alias` ||
+    as_fn_error "$SHELL $ac_aux_dir/config.sub $target_alias failed" "$LINENO" 5
+fi
 
 fi
-echo "$as_me:$LINENO: result: $ac_cv_target" >&5
-echo "${ECHO_T}$ac_cv_target" >&6
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_target" >&5
+$as_echo "$ac_cv_target" >&6; }
+case $ac_cv_target in
+*-*-*) ;;
+*) as_fn_error "invalid value of canonical target" "$LINENO" 5;;
+esac
 target=$ac_cv_target
-target_cpu=`echo $ac_cv_target | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\1/'`
-target_vendor=`echo $ac_cv_target | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\2/'`
-target_os=`echo $ac_cv_target | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'`
+ac_save_IFS=$IFS; IFS='-'
+set x $ac_cv_target
+shift
+target_cpu=$1
+target_vendor=$2
+shift; shift
+# Remember, the first character of IFS is used to create $*,
+# except with old shells:
+target_os=$*
+IFS=$ac_save_IFS
+case $target_os in *\ *) target_os=`echo "$target_os" | sed 's/ /-/g'`;; esac
 
 
 # The aliases save the names the user supplied, while $host etc.
@@ -3820,779 +4949,79 @@ test -n "$target_alias" &&
   test "$program_prefix$program_suffix$program_transform_name" = \
     NONENONEs,x,x, &&
   program_prefix=${target_alias}-
+
 test "$program_prefix" != NONE &&
-  program_transform_name="s,^,$program_prefix,;$program_transform_name"
+  program_transform_name="s&^&$program_prefix&;$program_transform_name"
 # Use a double $ so make ignores it.
 test "$program_suffix" != NONE &&
-  program_transform_name="s,\$,$program_suffix,;$program_transform_name"
-# Double any \ or $.  echo might interpret backslashes.
+  program_transform_name="s&\$&$program_suffix&;$program_transform_name"
+# Double any \ or $.
 # By default was `s,x,x', remove it if useless.
-cat <<\_ACEOF >conftest.sed
-s/[\\$]/&&/g;s/;s,x,x,$//
-_ACEOF
-program_transform_name=`echo $program_transform_name | sed -f conftest.sed`
-rm conftest.sed
+ac_script='s/[\\$]/&&/g;s/;s,x,x,$//'
+program_transform_name=`$as_echo "$program_transform_name" | sed "$ac_script"`
 
 
 # BFD conditionally uses zlib, so we must link it in if libbfd does, by
 # using the same condition.
-ac_ext=c
-ac_cpp='$CPP $CPPFLAGS'
-ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
-ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
-ac_compiler_gnu=$ac_cv_c_compiler_gnu
-echo "$as_me:$LINENO: checking how to run the C preprocessor" >&5
-echo $ECHO_N "checking how to run the C preprocessor... $ECHO_C" >&6
-# On Suns, sometimes $CPP names a directory.
-if test -n "$CPP" && test -d "$CPP"; then
-  CPP=
-fi
-if test -z "$CPP"; then
-  if test "${ac_cv_prog_CPP+set}" = set; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
-else
-      # Double quotes because CPP needs to be expanded
-    for CPP in "$CC -E" "$CC -E -traditional-cpp" "/lib/cpp"
-    do
-      ac_preproc_ok=false
-for ac_c_preproc_warn_flag in '' yes
-do
-  # Use a header file that comes with gcc, so configuring glibc
-  # with a fresh cross-compiler works.
-  # Prefer <limits.h> to <assert.h> if __STDC__ is defined, since
-  # <limits.h> exists even on freestanding compilers.
-  # On the NeXT, cc -E runs the code through the compiler's parser,
-  # not just through cpp. "Syntax error" is here to catch this case.
-  cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h.  */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h.  */
-#ifdef __STDC__
-# include <limits.h>
-#else
-# include <assert.h>
-#endif
-		     Syntax error
-_ACEOF
-if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5
-  (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1
-  ac_status=$?
-  grep -v '^ *+' conftest.er1 >conftest.err
-  rm -f conftest.er1
-  cat conftest.err >&5
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } >/dev/null; then
-  if test -s conftest.err; then
-    ac_cpp_err=$ac_c_preproc_warn_flag
-    ac_cpp_err=$ac_cpp_err$ac_c_werror_flag
-  else
-    ac_cpp_err=
-  fi
-else
-  ac_cpp_err=yes
-fi
-if test -z "$ac_cpp_err"; then
-  :
-else
-  echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-  # Broken: fails on valid input.
-continue
-fi
-rm -f conftest.err conftest.$ac_ext
-
-  # OK, works on sane cases.  Now check whether non-existent headers
-  # can be detected and how.
-  cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h.  */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h.  */
-#include <ac_nonexistent.h>
-_ACEOF
-if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5
-  (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1
-  ac_status=$?
-  grep -v '^ *+' conftest.er1 >conftest.err
-  rm -f conftest.er1
-  cat conftest.err >&5
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } >/dev/null; then
-  if test -s conftest.err; then
-    ac_cpp_err=$ac_c_preproc_warn_flag
-    ac_cpp_err=$ac_cpp_err$ac_c_werror_flag
-  else
-    ac_cpp_err=
-  fi
-else
-  ac_cpp_err=yes
-fi
-if test -z "$ac_cpp_err"; then
-  # Broken: success on invalid input.
-continue
-else
-  echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-  # Passes both tests.
-ac_preproc_ok=:
-break
-fi
-rm -f conftest.err conftest.$ac_ext
-
-done
-# Because of `break', _AC_PREPROC_IFELSE's cleaning code was skipped.
-rm -f conftest.err conftest.$ac_ext
-if $ac_preproc_ok; then
-  break
-fi
-
-    done
-    ac_cv_prog_CPP=$CPP
-
-fi
-  CPP=$ac_cv_prog_CPP
-else
-  ac_cv_prog_CPP=$CPP
-fi
-echo "$as_me:$LINENO: result: $CPP" >&5
-echo "${ECHO_T}$CPP" >&6
-ac_preproc_ok=false
-for ac_c_preproc_warn_flag in '' yes
-do
-  # Use a header file that comes with gcc, so configuring glibc
-  # with a fresh cross-compiler works.
-  # Prefer <limits.h> to <assert.h> if __STDC__ is defined, since
-  # <limits.h> exists even on freestanding compilers.
-  # On the NeXT, cc -E runs the code through the compiler's parser,
-  # not just through cpp. "Syntax error" is here to catch this case.
-  cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h.  */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h.  */
-#ifdef __STDC__
-# include <limits.h>
-#else
-# include <assert.h>
-#endif
-		     Syntax error
-_ACEOF
-if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5
-  (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1
-  ac_status=$?
-  grep -v '^ *+' conftest.er1 >conftest.err
-  rm -f conftest.er1
-  cat conftest.err >&5
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } >/dev/null; then
-  if test -s conftest.err; then
-    ac_cpp_err=$ac_c_preproc_warn_flag
-    ac_cpp_err=$ac_cpp_err$ac_c_werror_flag
-  else
-    ac_cpp_err=
-  fi
-else
-  ac_cpp_err=yes
-fi
-if test -z "$ac_cpp_err"; then
-  :
-else
-  echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-  # Broken: fails on valid input.
-continue
-fi
-rm -f conftest.err conftest.$ac_ext
-
-  # OK, works on sane cases.  Now check whether non-existent headers
-  # can be detected and how.
-  cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h.  */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h.  */
-#include <ac_nonexistent.h>
-_ACEOF
-if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5
-  (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1
-  ac_status=$?
-  grep -v '^ *+' conftest.er1 >conftest.err
-  rm -f conftest.er1
-  cat conftest.err >&5
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } >/dev/null; then
-  if test -s conftest.err; then
-    ac_cpp_err=$ac_c_preproc_warn_flag
-    ac_cpp_err=$ac_cpp_err$ac_c_werror_flag
-  else
-    ac_cpp_err=
-  fi
-else
-  ac_cpp_err=yes
-fi
-if test -z "$ac_cpp_err"; then
-  # Broken: success on invalid input.
-continue
-else
-  echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-  # Passes both tests.
-ac_preproc_ok=:
-break
-fi
-rm -f conftest.err conftest.$ac_ext
-
-done
-# Because of `break', _AC_PREPROC_IFELSE's cleaning code was skipped.
-rm -f conftest.err conftest.$ac_ext
-if $ac_preproc_ok; then
-  :
-else
-  { { echo "$as_me:$LINENO: error: in \`$ac_pwd':" >&5
-echo "$as_me: error: in \`$ac_pwd':" >&2;}
-{ { echo "$as_me:$LINENO: error: C preprocessor \"$CPP\" fails sanity check
-See \`config.log' for more details." >&5
-echo "$as_me: error: C preprocessor \"$CPP\" fails sanity check
-See \`config.log' for more details." >&2;}
-   { (exit 1); exit 1; }; }; }
-fi
-
-ac_ext=c
-ac_cpp='$CPP $CPPFLAGS'
-ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
-ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
-ac_compiler_gnu=$ac_cv_c_compiler_gnu
-
-
-echo "$as_me:$LINENO: checking for egrep" >&5
-echo $ECHO_N "checking for egrep... $ECHO_C" >&6
-if test "${ac_cv_prog_egrep+set}" = set; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
-else
-  if echo a | (grep -E '(a|b)') >/dev/null 2>&1
-    then ac_cv_prog_egrep='grep -E'
-    else ac_cv_prog_egrep='egrep'
-    fi
-fi
-echo "$as_me:$LINENO: result: $ac_cv_prog_egrep" >&5
-echo "${ECHO_T}$ac_cv_prog_egrep" >&6
- EGREP=$ac_cv_prog_egrep
-
-
-echo "$as_me:$LINENO: checking for ANSI C header files" >&5
-echo $ECHO_N "checking for ANSI C header files... $ECHO_C" >&6
-if test "${ac_cv_header_stdc+set}" = set; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
-else
-  cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h.  */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h.  */
-#include <stdlib.h>
-#include <stdarg.h>
-#include <string.h>
-#include <float.h>
-
-int
-main ()
-{
-
-  ;
-  return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext
-if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
-  (eval $ac_compile) 2>conftest.er1
-  ac_status=$?
-  grep -v '^ *+' conftest.er1 >conftest.err
-  rm -f conftest.er1
-  cat conftest.err >&5
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } &&
-	 { ac_try='test -z "$ac_c_werror_flag"
-			 || test ! -s conftest.err'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; } &&
-	 { ac_try='test -s conftest.$ac_objext'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; }; then
-  ac_cv_header_stdc=yes
-else
-  echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-ac_cv_header_stdc=no
-fi
-rm -f conftest.err conftest.$ac_objext conftest.$ac_ext
-
-if test $ac_cv_header_stdc = yes; then
-  # SunOS 4.x string.h does not declare mem*, contrary to ANSI.
-  cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h.  */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h.  */
-#include <string.h>
-
-_ACEOF
-if (eval "$ac_cpp conftest.$ac_ext") 2>&5 |
-  $EGREP "memchr" >/dev/null 2>&1; then
-  :
-else
-  ac_cv_header_stdc=no
-fi
-rm -f conftest*
-
-fi
-
-if test $ac_cv_header_stdc = yes; then
-  # ISC 2.0.2 stdlib.h does not declare free, contrary to ANSI.
-  cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h.  */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h.  */
-#include <stdlib.h>
-
-_ACEOF
-if (eval "$ac_cpp conftest.$ac_ext") 2>&5 |
-  $EGREP "free" >/dev/null 2>&1; then
-  :
-else
-  ac_cv_header_stdc=no
-fi
-rm -f conftest*
-
-fi
-
-if test $ac_cv_header_stdc = yes; then
-  # /bin/cc in Irix-4.0.5 gets non-ANSI ctype macros unless using -ansi.
-  if test "$cross_compiling" = yes; then
-  :
-else
-  cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h.  */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h.  */
-#include <ctype.h>
-#if ((' ' & 0x0FF) == 0x020)
-# define ISLOWER(c) ('a' <= (c) && (c) <= 'z')
-# define TOUPPER(c) (ISLOWER(c) ? 'A' + ((c) - 'a') : (c))
-#else
-# define ISLOWER(c) \
-		   (('a' <= (c) && (c) <= 'i') \
-		     || ('j' <= (c) && (c) <= 'r') \
-		     || ('s' <= (c) && (c) <= 'z'))
-# define TOUPPER(c) (ISLOWER(c) ? ((c) | 0x40) : (c))
-#endif
-
-#define XOR(e, f) (((e) && !(f)) || (!(e) && (f)))
-int
-main ()
-{
-  int i;
-  for (i = 0; i < 256; i++)
-    if (XOR (islower (i), ISLOWER (i))
-	|| toupper (i) != TOUPPER (i))
-      exit(2);
-  exit (0);
-}
-_ACEOF
-rm -f conftest$ac_exeext
-if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
-  (eval $ac_link) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } && { ac_try='./conftest$ac_exeext'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; }; then
-  :
-else
-  echo "$as_me: program exited with status $ac_status" >&5
-echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-( exit $ac_status )
-ac_cv_header_stdc=no
-fi
-rm -f core *.core gmon.out bb.out conftest$ac_exeext conftest.$ac_objext conftest.$ac_ext
-fi
-fi
-fi
-echo "$as_me:$LINENO: result: $ac_cv_header_stdc" >&5
-echo "${ECHO_T}$ac_cv_header_stdc" >&6
-if test $ac_cv_header_stdc = yes; then
-
-cat >>confdefs.h <<\_ACEOF
-#define STDC_HEADERS 1
-_ACEOF
-
-fi
-
-# On IRIX 5.3, sys/types and inttypes.h are conflicting.
-
-
-
-
-
-
-
-
-
-for ac_header in sys/types.h sys/stat.h stdlib.h string.h memory.h strings.h \
-		  inttypes.h stdint.h unistd.h
-do
-as_ac_Header=`echo "ac_cv_header_$ac_header" | $as_tr_sh`
-echo "$as_me:$LINENO: checking for $ac_header" >&5
-echo $ECHO_N "checking for $ac_header... $ECHO_C" >&6
-if eval "test \"\${$as_ac_Header+set}\" = set"; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
-else
-  cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h.  */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h.  */
-$ac_includes_default
-
-#include <$ac_header>
-_ACEOF
-rm -f conftest.$ac_objext
-if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
-  (eval $ac_compile) 2>conftest.er1
-  ac_status=$?
-  grep -v '^ *+' conftest.er1 >conftest.err
-  rm -f conftest.er1
-  cat conftest.err >&5
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } &&
-	 { ac_try='test -z "$ac_c_werror_flag"
-			 || test ! -s conftest.err'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; } &&
-	 { ac_try='test -s conftest.$ac_objext'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; }; then
-  eval "$as_ac_Header=yes"
-else
-  echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-eval "$as_ac_Header=no"
-fi
-rm -f conftest.err conftest.$ac_objext conftest.$ac_ext
-fi
-echo "$as_me:$LINENO: result: `eval echo '${'$as_ac_Header'}'`" >&5
-echo "${ECHO_T}`eval echo '${'$as_ac_Header'}'`" >&6
-if test `eval echo '${'$as_ac_Header'}'` = yes; then
-  cat >>confdefs.h <<_ACEOF
-#define `echo "HAVE_$ac_header" | $as_tr_cpp` 1
-_ACEOF
-
-fi
-
-done
-
-
-echo "$as_me:$LINENO: checking for library containing zlibVersion" >&5
-echo $ECHO_N "checking for library containing zlibVersion... $ECHO_C" >&6
-if test "${ac_cv_search_zlibVersion+set}" = set; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for library containing zlibVersion" >&5
+$as_echo_n "checking for library containing zlibVersion... " >&6; }
+if test "${ac_cv_search_zlibVersion+set}" = set; then :
+  $as_echo_n "(cached) " >&6
 else
   ac_func_search_save_LIBS=$LIBS
-ac_cv_search_zlibVersion=no
-cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h.  */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
+cat confdefs.h - <<_ACEOF >conftest.$ac_ext
 /* end confdefs.h.  */
 
-/* Override any gcc2 internal prototype to avoid an error.  */
-#ifdef __cplusplus
-extern "C"
-#endif
-/* We use char because int might match the return type of a gcc2
+/* Override any GCC internal prototype to avoid an error.
+   Use char because int might match the return type of a GCC
    builtin and then its argument prototype would still apply.  */
-char zlibVersion ();
-int
-main ()
-{
-zlibVersion ();
-  ;
-  return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext conftest$ac_exeext
-if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
-  (eval $ac_link) 2>conftest.er1
-  ac_status=$?
-  grep -v '^ *+' conftest.er1 >conftest.err
-  rm -f conftest.er1
-  cat conftest.err >&5
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } &&
-	 { ac_try='test -z "$ac_c_werror_flag"
-			 || test ! -s conftest.err'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; } &&
-	 { ac_try='test -s conftest$ac_exeext'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; }; then
-  ac_cv_search_zlibVersion="none required"
-else
-  echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-fi
-rm -f conftest.err conftest.$ac_objext \
-      conftest$ac_exeext conftest.$ac_ext
-if test "$ac_cv_search_zlibVersion" = no; then
-  for ac_lib in z; do
-    LIBS="-l$ac_lib  $ac_func_search_save_LIBS"
-    cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h.  */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h.  */
-
-/* Override any gcc2 internal prototype to avoid an error.  */
 #ifdef __cplusplus
 extern "C"
 #endif
-/* We use char because int might match the return type of a gcc2
-   builtin and then its argument prototype would still apply.  */
 char zlibVersion ();
 int
 main ()
 {
-zlibVersion ();
+return zlibVersion ();
   ;
   return 0;
 }
 _ACEOF
-rm -f conftest.$ac_objext conftest$ac_exeext
-if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
-  (eval $ac_link) 2>conftest.er1
-  ac_status=$?
-  grep -v '^ *+' conftest.er1 >conftest.err
-  rm -f conftest.er1
-  cat conftest.err >&5
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } &&
-	 { ac_try='test -z "$ac_c_werror_flag"
-			 || test ! -s conftest.err'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; } &&
-	 { ac_try='test -s conftest$ac_exeext'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; }; then
-  ac_cv_search_zlibVersion="-l$ac_lib"
-break
-else
-  echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-fi
-rm -f conftest.err conftest.$ac_objext \
-      conftest$ac_exeext conftest.$ac_ext
-  done
-fi
-LIBS=$ac_func_search_save_LIBS
-fi
-echo "$as_me:$LINENO: result: $ac_cv_search_zlibVersion" >&5
-echo "${ECHO_T}$ac_cv_search_zlibVersion" >&6
-if test "$ac_cv_search_zlibVersion" != no; then
-  test "$ac_cv_search_zlibVersion" = "none required" || LIBS="$ac_cv_search_zlibVersion $LIBS"
-
-for ac_header in zlib.h
-do
-as_ac_Header=`echo "ac_cv_header_$ac_header" | $as_tr_sh`
-if eval "test \"\${$as_ac_Header+set}\" = set"; then
-  echo "$as_me:$LINENO: checking for $ac_header" >&5
-echo $ECHO_N "checking for $ac_header... $ECHO_C" >&6
-if eval "test \"\${$as_ac_Header+set}\" = set"; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
-fi
-echo "$as_me:$LINENO: result: `eval echo '${'$as_ac_Header'}'`" >&5
-echo "${ECHO_T}`eval echo '${'$as_ac_Header'}'`" >&6
-else
-  # Is the header compilable?
-echo "$as_me:$LINENO: checking $ac_header usability" >&5
-echo $ECHO_N "checking $ac_header usability... $ECHO_C" >&6
-cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h.  */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h.  */
-$ac_includes_default
-#include <$ac_header>
-_ACEOF
-rm -f conftest.$ac_objext
-if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
-  (eval $ac_compile) 2>conftest.er1
-  ac_status=$?
-  grep -v '^ *+' conftest.er1 >conftest.err
-  rm -f conftest.er1
-  cat conftest.err >&5
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } &&
-	 { ac_try='test -z "$ac_c_werror_flag"
-			 || test ! -s conftest.err'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; } &&
-	 { ac_try='test -s conftest.$ac_objext'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; }; then
-  ac_header_compiler=yes
-else
-  echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-ac_header_compiler=no
-fi
-rm -f conftest.err conftest.$ac_objext conftest.$ac_ext
-echo "$as_me:$LINENO: result: $ac_header_compiler" >&5
-echo "${ECHO_T}$ac_header_compiler" >&6
-
-# Is the header present?
-echo "$as_me:$LINENO: checking $ac_header presence" >&5
-echo $ECHO_N "checking $ac_header presence... $ECHO_C" >&6
-cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h.  */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h.  */
-#include <$ac_header>
-_ACEOF
-if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5
-  (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1
-  ac_status=$?
-  grep -v '^ *+' conftest.er1 >conftest.err
-  rm -f conftest.er1
-  cat conftest.err >&5
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } >/dev/null; then
-  if test -s conftest.err; then
-    ac_cpp_err=$ac_c_preproc_warn_flag
-    ac_cpp_err=$ac_cpp_err$ac_c_werror_flag
+for ac_lib in '' z; do
+  if test -z "$ac_lib"; then
+    ac_res="none required"
   else
-    ac_cpp_err=
+    ac_res=-l$ac_lib
+    LIBS="-l$ac_lib  $ac_func_search_save_LIBS"
   fi
-else
-  ac_cpp_err=yes
+  if ac_fn_c_try_link "$LINENO"; then :
+  ac_cv_search_zlibVersion=$ac_res
 fi
-if test -z "$ac_cpp_err"; then
-  ac_header_preproc=yes
-else
-  echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-  ac_header_preproc=no
+rm -f core conftest.err conftest.$ac_objext \
+    conftest$ac_exeext
+  if test "${ac_cv_search_zlibVersion+set}" = set; then :
+  break
 fi
-rm -f conftest.err conftest.$ac_ext
-echo "$as_me:$LINENO: result: $ac_header_preproc" >&5
-echo "${ECHO_T}$ac_header_preproc" >&6
+done
+if test "${ac_cv_search_zlibVersion+set}" = set; then :
 
-# So?  What about this header?
-case $ac_header_compiler:$ac_header_preproc:$ac_c_preproc_warn_flag in
-  yes:no: )
-    { echo "$as_me:$LINENO: WARNING: $ac_header: accepted by the compiler, rejected by the preprocessor!" >&5
-echo "$as_me: WARNING: $ac_header: accepted by the compiler, rejected by the preprocessor!" >&2;}
-    { echo "$as_me:$LINENO: WARNING: $ac_header: proceeding with the compiler's result" >&5
-echo "$as_me: WARNING: $ac_header: proceeding with the compiler's result" >&2;}
-    ac_header_preproc=yes
-    ;;
-  no:yes:* )
-    { echo "$as_me:$LINENO: WARNING: $ac_header: present but cannot be compiled" >&5
-echo "$as_me: WARNING: $ac_header: present but cannot be compiled" >&2;}
-    { echo "$as_me:$LINENO: WARNING: $ac_header:     check for missing prerequisite headers?" >&5
-echo "$as_me: WARNING: $ac_header:     check for missing prerequisite headers?" >&2;}
-    { echo "$as_me:$LINENO: WARNING: $ac_header: see the Autoconf documentation" >&5
-echo "$as_me: WARNING: $ac_header: see the Autoconf documentation" >&2;}
-    { echo "$as_me:$LINENO: WARNING: $ac_header:     section \"Present But Cannot Be Compiled\"" >&5
-echo "$as_me: WARNING: $ac_header:     section \"Present But Cannot Be Compiled\"" >&2;}
-    { echo "$as_me:$LINENO: WARNING: $ac_header: proceeding with the preprocessor's result" >&5
-echo "$as_me: WARNING: $ac_header: proceeding with the preprocessor's result" >&2;}
-    { echo "$as_me:$LINENO: WARNING: $ac_header: in the future, the compiler will take precedence" >&5
-echo "$as_me: WARNING: $ac_header: in the future, the compiler will take precedence" >&2;}
-    (
-      cat <<\_ASBOX
-## ------------------------------------------ ##
-## Report this to the AC_PACKAGE_NAME lists.  ##
-## ------------------------------------------ ##
-_ASBOX
-    ) |
-      sed "s/^/$as_me: WARNING:     /" >&2
-    ;;
-esac
-echo "$as_me:$LINENO: checking for $ac_header" >&5
-echo $ECHO_N "checking for $ac_header... $ECHO_C" >&6
-if eval "test \"\${$as_ac_Header+set}\" = set"; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
 else
-  eval "$as_ac_Header=\$ac_header_preproc"
+  ac_cv_search_zlibVersion=no
 fi
-echo "$as_me:$LINENO: result: `eval echo '${'$as_ac_Header'}'`" >&5
-echo "${ECHO_T}`eval echo '${'$as_ac_Header'}'`" >&6
-
+rm conftest.$ac_ext
+LIBS=$ac_func_search_save_LIBS
 fi
-if test `eval echo '${'$as_ac_Header'}'` = yes; then
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_search_zlibVersion" >&5
+$as_echo "$ac_cv_search_zlibVersion" >&6; }
+ac_res=$ac_cv_search_zlibVersion
+if test "$ac_res" != no; then :
+  test "$ac_res" = "none required" || LIBS="$ac_res $LIBS"
+  for ac_header in zlib.h
+do :
+  ac_fn_c_check_header_mongrel "$LINENO" "zlib.h" "ac_cv_header_zlib_h" "$ac_includes_default"
+if test "x$ac_cv_header_zlib_h" = x""yes; then :
   cat >>confdefs.h <<_ACEOF
-#define `echo "HAVE_$ac_header" | $as_tr_cpp` 1
+#define HAVE_ZLIB_H 1
 _ACEOF
 
 fi
@@ -4607,382 +5036,66 @@ fi
 case ${host} in
   *mingw32*)
 
-cat >>confdefs.h <<\_ACEOF
-#define USE_WIN32API 1
-_ACEOF
+$as_echo "#define USE_WIN32API 1" >>confdefs.h
 
     ;;
 esac
 
-          ac_config_headers="$ac_config_headers config.h:config.in"
-
-
-
-echo "$as_me:$LINENO: checking for struct stat.st_blksize" >&5
-echo $ECHO_N "checking for struct stat.st_blksize... $ECHO_C" >&6
-if test "${ac_cv_member_struct_stat_st_blksize+set}" = set; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
-else
-  cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h.  */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h.  */
-$ac_includes_default
-int
-main ()
-{
-static struct stat ac_aggr;
-if (ac_aggr.st_blksize)
-return 0;
-  ;
-  return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext
-if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
-  (eval $ac_compile) 2>conftest.er1
-  ac_status=$?
-  grep -v '^ *+' conftest.er1 >conftest.err
-  rm -f conftest.er1
-  cat conftest.err >&5
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } &&
-	 { ac_try='test -z "$ac_c_werror_flag"
-			 || test ! -s conftest.err'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; } &&
-	 { ac_try='test -s conftest.$ac_objext'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; }; then
-  ac_cv_member_struct_stat_st_blksize=yes
-else
-  echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
+ac_config_headers="$ac_config_headers config.h:config.in"
 
-cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h.  */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h.  */
-$ac_includes_default
-int
-main ()
-{
-static struct stat ac_aggr;
-if (sizeof ac_aggr.st_blksize)
-return 0;
-  ;
-  return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext
-if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
-  (eval $ac_compile) 2>conftest.er1
-  ac_status=$?
-  grep -v '^ *+' conftest.er1 >conftest.err
-  rm -f conftest.er1
-  cat conftest.err >&5
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } &&
-	 { ac_try='test -z "$ac_c_werror_flag"
-			 || test ! -s conftest.err'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; } &&
-	 { ac_try='test -s conftest.$ac_objext'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; }; then
-  ac_cv_member_struct_stat_st_blksize=yes
-else
-  echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
 
-ac_cv_member_struct_stat_st_blksize=no
-fi
-rm -f conftest.err conftest.$ac_objext conftest.$ac_ext
-fi
-rm -f conftest.err conftest.$ac_objext conftest.$ac_ext
-fi
-echo "$as_me:$LINENO: result: $ac_cv_member_struct_stat_st_blksize" >&5
-echo "${ECHO_T}$ac_cv_member_struct_stat_st_blksize" >&6
-if test $ac_cv_member_struct_stat_st_blksize = yes; then
+ac_fn_c_check_member "$LINENO" "struct stat" "st_blksize" "ac_cv_member_struct_stat_st_blksize" "$ac_includes_default"
+if test "x$ac_cv_member_struct_stat_st_blksize" = x""yes; then :
 
 cat >>confdefs.h <<_ACEOF
 #define HAVE_STRUCT_STAT_ST_BLKSIZE 1
 _ACEOF
 
 
-cat >>confdefs.h <<\_ACEOF
-#define HAVE_ST_BLKSIZE 1
-_ACEOF
+$as_echo "#define HAVE_ST_BLKSIZE 1" >>confdefs.h
 
 fi
 
 
-echo "$as_me:$LINENO: checking for struct stat.st_blocks" >&5
-echo $ECHO_N "checking for struct stat.st_blocks... $ECHO_C" >&6
-if test "${ac_cv_member_struct_stat_st_blocks+set}" = set; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
-else
-  cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h.  */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h.  */
-$ac_includes_default
-int
-main ()
-{
-static struct stat ac_aggr;
-if (ac_aggr.st_blocks)
-return 0;
-  ;
-  return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext
-if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
-  (eval $ac_compile) 2>conftest.er1
-  ac_status=$?
-  grep -v '^ *+' conftest.er1 >conftest.err
-  rm -f conftest.er1
-  cat conftest.err >&5
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } &&
-	 { ac_try='test -z "$ac_c_werror_flag"
-			 || test ! -s conftest.err'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; } &&
-	 { ac_try='test -s conftest.$ac_objext'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; }; then
-  ac_cv_member_struct_stat_st_blocks=yes
-else
-  echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h.  */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h.  */
-$ac_includes_default
-int
-main ()
-{
-static struct stat ac_aggr;
-if (sizeof ac_aggr.st_blocks)
-return 0;
-  ;
-  return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext
-if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
-  (eval $ac_compile) 2>conftest.er1
-  ac_status=$?
-  grep -v '^ *+' conftest.er1 >conftest.err
-  rm -f conftest.er1
-  cat conftest.err >&5
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } &&
-	 { ac_try='test -z "$ac_c_werror_flag"
-			 || test ! -s conftest.err'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; } &&
-	 { ac_try='test -s conftest.$ac_objext'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; }; then
-  ac_cv_member_struct_stat_st_blocks=yes
-else
-  echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-ac_cv_member_struct_stat_st_blocks=no
-fi
-rm -f conftest.err conftest.$ac_objext conftest.$ac_ext
-fi
-rm -f conftest.err conftest.$ac_objext conftest.$ac_ext
-fi
-echo "$as_me:$LINENO: result: $ac_cv_member_struct_stat_st_blocks" >&5
-echo "${ECHO_T}$ac_cv_member_struct_stat_st_blocks" >&6
-if test $ac_cv_member_struct_stat_st_blocks = yes; then
+ac_fn_c_check_member "$LINENO" "struct stat" "st_blocks" "ac_cv_member_struct_stat_st_blocks" "$ac_includes_default"
+if test "x$ac_cv_member_struct_stat_st_blocks" = x""yes; then :
 
 cat >>confdefs.h <<_ACEOF
 #define HAVE_STRUCT_STAT_ST_BLOCKS 1
 _ACEOF
 
 
-cat >>confdefs.h <<\_ACEOF
-#define HAVE_ST_BLOCKS 1
-_ACEOF
+$as_echo "#define HAVE_ST_BLOCKS 1" >>confdefs.h
 
 else
-  case $LIBOBJS in
-    "fileblocks.$ac_objext"   | \
-  *" fileblocks.$ac_objext"   | \
-    "fileblocks.$ac_objext "* | \
+  case " $LIBOBJS " in
   *" fileblocks.$ac_objext "* ) ;;
-  *) LIBOBJS="$LIBOBJS fileblocks.$ac_objext" ;;
+  *) LIBOBJS="$LIBOBJS fileblocks.$ac_objext"
+ ;;
 esac
 
 fi
 
 
-
-echo "$as_me:$LINENO: checking for struct stat.st_rdev" >&5
-echo $ECHO_N "checking for struct stat.st_rdev... $ECHO_C" >&6
-if test "${ac_cv_member_struct_stat_st_rdev+set}" = set; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
-else
-  cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h.  */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h.  */
-$ac_includes_default
-int
-main ()
-{
-static struct stat ac_aggr;
-if (ac_aggr.st_rdev)
-return 0;
-  ;
-  return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext
-if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
-  (eval $ac_compile) 2>conftest.er1
-  ac_status=$?
-  grep -v '^ *+' conftest.er1 >conftest.err
-  rm -f conftest.er1
-  cat conftest.err >&5
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } &&
-	 { ac_try='test -z "$ac_c_werror_flag"
-			 || test ! -s conftest.err'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; } &&
-	 { ac_try='test -s conftest.$ac_objext'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; }; then
-  ac_cv_member_struct_stat_st_rdev=yes
-else
-  echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h.  */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h.  */
-$ac_includes_default
-int
-main ()
-{
-static struct stat ac_aggr;
-if (sizeof ac_aggr.st_rdev)
-return 0;
-  ;
-  return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext
-if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
-  (eval $ac_compile) 2>conftest.er1
-  ac_status=$?
-  grep -v '^ *+' conftest.er1 >conftest.err
-  rm -f conftest.er1
-  cat conftest.err >&5
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } &&
-	 { ac_try='test -z "$ac_c_werror_flag"
-			 || test ! -s conftest.err'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; } &&
-	 { ac_try='test -s conftest.$ac_objext'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; }; then
-  ac_cv_member_struct_stat_st_rdev=yes
-else
-  echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-ac_cv_member_struct_stat_st_rdev=no
-fi
-rm -f conftest.err conftest.$ac_objext conftest.$ac_ext
-fi
-rm -f conftest.err conftest.$ac_objext conftest.$ac_ext
-fi
-echo "$as_me:$LINENO: result: $ac_cv_member_struct_stat_st_rdev" >&5
-echo "${ECHO_T}$ac_cv_member_struct_stat_st_rdev" >&6
-if test $ac_cv_member_struct_stat_st_rdev = yes; then
+ac_fn_c_check_member "$LINENO" "struct stat" "st_rdev" "ac_cv_member_struct_stat_st_rdev" "$ac_includes_default"
+if test "x$ac_cv_member_struct_stat_st_rdev" = x""yes; then :
 
 cat >>confdefs.h <<_ACEOF
 #define HAVE_STRUCT_STAT_ST_RDEV 1
 _ACEOF
 
 
-cat >>confdefs.h <<\_ACEOF
-#define HAVE_ST_RDEV 1
-_ACEOF
+$as_echo "#define HAVE_ST_RDEV 1" >>confdefs.h
 
 fi
 
 
-echo "$as_me:$LINENO: checking whether struct tm is in sys/time.h or time.h" >&5
-echo $ECHO_N "checking whether struct tm is in sys/time.h or time.h... $ECHO_C" >&6
-if test "${ac_cv_struct_tm+set}" = set; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether struct tm is in sys/time.h or time.h" >&5
+$as_echo_n "checking whether struct tm is in sys/time.h or time.h... " >&6; }
+if test "${ac_cv_struct_tm+set}" = set; then :
+  $as_echo_n "(cached) " >&6
 else
-  cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h.  */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
+  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
 /* end confdefs.h.  */
 #include <sys/types.h>
 #include <time.h>
@@ -4990,160 +5103,33 @@ cat >>conftest.$ac_ext <<_ACEOF
 int
 main ()
 {
-struct tm *tp; tp->tm_sec;
+struct tm tm;
+				     int *p = &tm.tm_sec;
+				     return !p;
   ;
   return 0;
 }
 _ACEOF
-rm -f conftest.$ac_objext
-if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
-  (eval $ac_compile) 2>conftest.er1
-  ac_status=$?
-  grep -v '^ *+' conftest.er1 >conftest.err
-  rm -f conftest.er1
-  cat conftest.err >&5
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } &&
-	 { ac_try='test -z "$ac_c_werror_flag"
-			 || test ! -s conftest.err'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; } &&
-	 { ac_try='test -s conftest.$ac_objext'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; }; then
+if ac_fn_c_try_compile "$LINENO"; then :
   ac_cv_struct_tm=time.h
 else
-  echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-ac_cv_struct_tm=sys/time.h
+  ac_cv_struct_tm=sys/time.h
 fi
-rm -f conftest.err conftest.$ac_objext conftest.$ac_ext
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
 fi
-echo "$as_me:$LINENO: result: $ac_cv_struct_tm" >&5
-echo "${ECHO_T}$ac_cv_struct_tm" >&6
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_struct_tm" >&5
+$as_echo "$ac_cv_struct_tm" >&6; }
 if test $ac_cv_struct_tm = sys/time.h; then
 
-cat >>confdefs.h <<\_ACEOF
-#define TM_IN_SYS_TIME 1
-_ACEOF
+$as_echo "#define TM_IN_SYS_TIME 1" >>confdefs.h
 
 fi
 
-echo "$as_me:$LINENO: checking for struct tm.tm_zone" >&5
-echo $ECHO_N "checking for struct tm.tm_zone... $ECHO_C" >&6
-if test "${ac_cv_member_struct_tm_tm_zone+set}" = set; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
-else
-  cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h.  */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h.  */
-#include <sys/types.h>
-#include <$ac_cv_struct_tm>
-
-
-int
-main ()
-{
-static struct tm ac_aggr;
-if (ac_aggr.tm_zone)
-return 0;
-  ;
-  return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext
-if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
-  (eval $ac_compile) 2>conftest.er1
-  ac_status=$?
-  grep -v '^ *+' conftest.er1 >conftest.err
-  rm -f conftest.er1
-  cat conftest.err >&5
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } &&
-	 { ac_try='test -z "$ac_c_werror_flag"
-			 || test ! -s conftest.err'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; } &&
-	 { ac_try='test -s conftest.$ac_objext'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; }; then
-  ac_cv_member_struct_tm_tm_zone=yes
-else
-  echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h.  */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h.  */
-#include <sys/types.h>
+ac_fn_c_check_member "$LINENO" "struct tm" "tm_zone" "ac_cv_member_struct_tm_tm_zone" "#include <sys/types.h>
 #include <$ac_cv_struct_tm>
 
-
-int
-main ()
-{
-static struct tm ac_aggr;
-if (sizeof ac_aggr.tm_zone)
-return 0;
-  ;
-  return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext
-if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
-  (eval $ac_compile) 2>conftest.er1
-  ac_status=$?
-  grep -v '^ *+' conftest.er1 >conftest.err
-  rm -f conftest.er1
-  cat conftest.err >&5
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } &&
-	 { ac_try='test -z "$ac_c_werror_flag"
-			 || test ! -s conftest.err'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; } &&
-	 { ac_try='test -s conftest.$ac_objext'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; }; then
-  ac_cv_member_struct_tm_tm_zone=yes
-else
-  echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-ac_cv_member_struct_tm_tm_zone=no
-fi
-rm -f conftest.err conftest.$ac_objext conftest.$ac_ext
-fi
-rm -f conftest.err conftest.$ac_objext conftest.$ac_ext
-fi
-echo "$as_me:$LINENO: result: $ac_cv_member_struct_tm_tm_zone" >&5
-echo "${ECHO_T}$ac_cv_member_struct_tm_tm_zone" >&6
-if test $ac_cv_member_struct_tm_tm_zone = yes; then
+"
+if test "x$ac_cv_member_struct_tm_tm_zone" = x""yes; then :
 
 cat >>confdefs.h <<_ACEOF
 #define HAVE_STRUCT_TM_TM_ZONE 1
@@ -5154,95 +5140,71 @@ fi
 
 if test "$ac_cv_member_struct_tm_tm_zone" = yes; then
 
-cat >>confdefs.h <<\_ACEOF
-#define HAVE_TM_ZONE 1
-_ACEOF
+$as_echo "#define HAVE_TM_ZONE 1" >>confdefs.h
 
 else
-  echo "$as_me:$LINENO: checking for tzname" >&5
-echo $ECHO_N "checking for tzname... $ECHO_C" >&6
-if test "${ac_cv_var_tzname+set}" = set; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
+  ac_fn_c_check_decl "$LINENO" "tzname" "ac_cv_have_decl_tzname" "#include <time.h>
+"
+if test "x$ac_cv_have_decl_tzname" = x""yes; then :
+  ac_have_decl=1
 else
-  cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h.  */
+  ac_have_decl=0
+fi
+
+cat >>confdefs.h <<_ACEOF
+#define HAVE_DECL_TZNAME $ac_have_decl
 _ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
+
+  { $as_echo "$as_me:${as_lineno-$LINENO}: checking for tzname" >&5
+$as_echo_n "checking for tzname... " >&6; }
+if test "${ac_cv_var_tzname+set}" = set; then :
+  $as_echo_n "(cached) " >&6
+else
+  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
 /* end confdefs.h.  */
 #include <time.h>
-#ifndef tzname /* For SGI.  */
-extern char *tzname[]; /* RS6000 and others reject char **tzname.  */
+#if !HAVE_DECL_TZNAME
+extern char *tzname[];
 #endif
 
 int
 main ()
 {
-atoi(*tzname);
+return tzname[0][0];
   ;
   return 0;
 }
 _ACEOF
-rm -f conftest.$ac_objext conftest$ac_exeext
-if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
-  (eval $ac_link) 2>conftest.er1
-  ac_status=$?
-  grep -v '^ *+' conftest.er1 >conftest.err
-  rm -f conftest.er1
-  cat conftest.err >&5
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } &&
-	 { ac_try='test -z "$ac_c_werror_flag"
-			 || test ! -s conftest.err'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; } &&
-	 { ac_try='test -s conftest$ac_exeext'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; }; then
+if ac_fn_c_try_link "$LINENO"; then :
   ac_cv_var_tzname=yes
 else
-  echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-ac_cv_var_tzname=no
+  ac_cv_var_tzname=no
 fi
-rm -f conftest.err conftest.$ac_objext \
-      conftest$ac_exeext conftest.$ac_ext
+rm -f core conftest.err conftest.$ac_objext \
+    conftest$ac_exeext conftest.$ac_ext
 fi
-echo "$as_me:$LINENO: result: $ac_cv_var_tzname" >&5
-echo "${ECHO_T}$ac_cv_var_tzname" >&6
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_var_tzname" >&5
+$as_echo "$ac_cv_var_tzname" >&6; }
   if test $ac_cv_var_tzname = yes; then
 
-cat >>confdefs.h <<\_ACEOF
-#define HAVE_TZNAME 1
-_ACEOF
+$as_echo "#define HAVE_TZNAME 1" >>confdefs.h
 
   fi
 fi
 
 
-echo "$as_me:$LINENO: checking for uid_t in sys/types.h" >&5
-echo $ECHO_N "checking for uid_t in sys/types.h... $ECHO_C" >&6
-if test "${ac_cv_type_uid_t+set}" = set; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for uid_t in sys/types.h" >&5
+$as_echo_n "checking for uid_t in sys/types.h... " >&6; }
+if test "${ac_cv_type_uid_t+set}" = set; then :
+  $as_echo_n "(cached) " >&6
 else
-  cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h.  */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
+  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
 /* end confdefs.h.  */
 #include <sys/types.h>
 
 _ACEOF
 if (eval "$ac_cpp conftest.$ac_ext") 2>&5 |
-  $EGREP "uid_t" >/dev/null 2>&1; then
+  $EGREP "uid_t" >/dev/null 2>&1; then :
   ac_cv_type_uid_t=yes
 else
   ac_cv_type_uid_t=no
@@ -5250,37 +5212,29 @@ fi
 rm -f conftest*
 
 fi
-echo "$as_me:$LINENO: result: $ac_cv_type_uid_t" >&5
-echo "${ECHO_T}$ac_cv_type_uid_t" >&6
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_type_uid_t" >&5
+$as_echo "$ac_cv_type_uid_t" >&6; }
 if test $ac_cv_type_uid_t = no; then
 
-cat >>confdefs.h <<\_ACEOF
-#define uid_t int
-_ACEOF
+$as_echo "#define uid_t int" >>confdefs.h
 
 
-cat >>confdefs.h <<\_ACEOF
-#define gid_t int
-_ACEOF
+$as_echo "#define gid_t int" >>confdefs.h
 
 fi
 
-echo "$as_me:$LINENO: checking type of array argument to getgroups" >&5
-echo $ECHO_N "checking type of array argument to getgroups... $ECHO_C" >&6
-if test "${ac_cv_type_getgroups+set}" = set; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking type of array argument to getgroups" >&5
+$as_echo_n "checking type of array argument to getgroups... " >&6; }
+if test "${ac_cv_type_getgroups+set}" = set; then :
+  $as_echo_n "(cached) " >&6
 else
-  if test "$cross_compiling" = yes; then
+  if test "$cross_compiling" = yes; then :
   ac_cv_type_getgroups=cross
 else
-  cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h.  */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
+  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
 /* end confdefs.h.  */
 /* Thanks to Mike Rendell for this test.  */
-#include <sys/types.h>
+$ac_includes_default
 #define NGID 256
 #undef MAX
 #define MAX(x, y) ((x) > (y) ? (x) : (y))
@@ -5290,7 +5244,7 @@ main ()
 {
   gid_t gidset[NGID];
   int i, n;
-  union { gid_t gval; long lval; }  val;
+  union { gid_t gval; long int lval; }  val;
 
   val.lval = -1;
   for (i = 0; i < NGID; i++)
@@ -5298,44 +5252,28 @@ main ()
   n = getgroups (sizeof (gidset) / MAX (sizeof (int), sizeof (gid_t)) - 1,
 		 gidset);
   /* Exit non-zero if getgroups seems to require an array of ints.  This
-     happens when gid_t is short but getgroups modifies an array of ints.  */
-  exit ((n > 0 && gidset[n] != val.gval) ? 1 : 0);
+     happens when gid_t is short int but getgroups modifies an array
+     of ints.  */
+  return n > 0 && gidset[n] != val.gval;
 }
 _ACEOF
-rm -f conftest$ac_exeext
-if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
-  (eval $ac_link) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } && { ac_try='./conftest$ac_exeext'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; }; then
+if ac_fn_c_try_run "$LINENO"; then :
   ac_cv_type_getgroups=gid_t
 else
-  echo "$as_me: program exited with status $ac_status" >&5
-echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-( exit $ac_status )
-ac_cv_type_getgroups=int
+  ac_cv_type_getgroups=int
 fi
-rm -f core *.core gmon.out bb.out conftest$ac_exeext conftest.$ac_objext conftest.$ac_ext
+rm -f core *.core core.conftest.* gmon.out bb.out conftest$ac_exeext \
+  conftest.$ac_objext conftest.beam conftest.$ac_ext
 fi
+
 if test $ac_cv_type_getgroups = cross; then
-        cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h.  */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
+        cat confdefs.h - <<_ACEOF >conftest.$ac_ext
 /* end confdefs.h.  */
 #include <unistd.h>
 
 _ACEOF
 if (eval "$ac_cpp conftest.$ac_ext") 2>&5 |
-  $EGREP "getgroups.*int.*gid_t" >/dev/null 2>&1; then
+  $EGREP "getgroups.*int.*gid_t" >/dev/null 2>&1; then :
   ac_cv_type_getgroups=gid_t
 else
   ac_cv_type_getgroups=int
@@ -5344,72 +5282,17 @@ rm -f conftest*
 
 fi
 fi
-echo "$as_me:$LINENO: result: $ac_cv_type_getgroups" >&5
-echo "${ECHO_T}$ac_cv_type_getgroups" >&6
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_type_getgroups" >&5
+$as_echo "$ac_cv_type_getgroups" >&6; }
 
 cat >>confdefs.h <<_ACEOF
 #define GETGROUPS_T $ac_cv_type_getgroups
 _ACEOF
 
 
-echo "$as_me:$LINENO: checking for mode_t" >&5
-echo $ECHO_N "checking for mode_t... $ECHO_C" >&6
-if test "${ac_cv_type_mode_t+set}" = set; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
-else
-  cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h.  */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h.  */
-$ac_includes_default
-int
-main ()
-{
-if ((mode_t *) 0)
-  return 0;
-if (sizeof (mode_t))
-  return 0;
-  ;
-  return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext
-if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
-  (eval $ac_compile) 2>conftest.er1
-  ac_status=$?
-  grep -v '^ *+' conftest.er1 >conftest.err
-  rm -f conftest.er1
-  cat conftest.err >&5
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } &&
-	 { ac_try='test -z "$ac_c_werror_flag"
-			 || test ! -s conftest.err'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; } &&
-	 { ac_try='test -s conftest.$ac_objext'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; }; then
-  ac_cv_type_mode_t=yes
-else
-  echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
+ac_fn_c_check_type "$LINENO" "mode_t" "ac_cv_type_mode_t" "$ac_includes_default"
+if test "x$ac_cv_type_mode_t" = x""yes; then :
 
-ac_cv_type_mode_t=no
-fi
-rm -f conftest.err conftest.$ac_objext conftest.$ac_ext
-fi
-echo "$as_me:$LINENO: result: $ac_cv_type_mode_t" >&5
-echo "${ECHO_T}$ac_cv_type_mode_t" >&6
-if test $ac_cv_type_mode_t = yes; then
-  :
 else
 
 cat >>confdefs.h <<_ACEOF
@@ -5418,130 +5301,20 @@ _ACEOF
 
 fi
 
-echo "$as_me:$LINENO: checking for off_t" >&5
-echo $ECHO_N "checking for off_t... $ECHO_C" >&6
-if test "${ac_cv_type_off_t+set}" = set; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
-else
-  cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h.  */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h.  */
-$ac_includes_default
-int
-main ()
-{
-if ((off_t *) 0)
-  return 0;
-if (sizeof (off_t))
-  return 0;
-  ;
-  return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext
-if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
-  (eval $ac_compile) 2>conftest.er1
-  ac_status=$?
-  grep -v '^ *+' conftest.er1 >conftest.err
-  rm -f conftest.er1
-  cat conftest.err >&5
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } &&
-	 { ac_try='test -z "$ac_c_werror_flag"
-			 || test ! -s conftest.err'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; } &&
-	 { ac_try='test -s conftest.$ac_objext'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; }; then
-  ac_cv_type_off_t=yes
-else
-  echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
+ac_fn_c_check_type "$LINENO" "off_t" "ac_cv_type_off_t" "$ac_includes_default"
+if test "x$ac_cv_type_off_t" = x""yes; then :
 
-ac_cv_type_off_t=no
-fi
-rm -f conftest.err conftest.$ac_objext conftest.$ac_ext
-fi
-echo "$as_me:$LINENO: result: $ac_cv_type_off_t" >&5
-echo "${ECHO_T}$ac_cv_type_off_t" >&6
-if test $ac_cv_type_off_t = yes; then
-  :
 else
 
 cat >>confdefs.h <<_ACEOF
-#define off_t long
+#define off_t long int
 _ACEOF
 
 fi
 
-echo "$as_me:$LINENO: checking for pid_t" >&5
-echo $ECHO_N "checking for pid_t... $ECHO_C" >&6
-if test "${ac_cv_type_pid_t+set}" = set; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
-else
-  cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h.  */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h.  */
-$ac_includes_default
-int
-main ()
-{
-if ((pid_t *) 0)
-  return 0;
-if (sizeof (pid_t))
-  return 0;
-  ;
-  return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext
-if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
-  (eval $ac_compile) 2>conftest.er1
-  ac_status=$?
-  grep -v '^ *+' conftest.er1 >conftest.err
-  rm -f conftest.er1
-  cat conftest.err >&5
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } &&
-	 { ac_try='test -z "$ac_c_werror_flag"
-			 || test ! -s conftest.err'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; } &&
-	 { ac_try='test -s conftest.$ac_objext'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; }; then
-  ac_cv_type_pid_t=yes
-else
-  echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
+ac_fn_c_check_type "$LINENO" "pid_t" "ac_cv_type_pid_t" "$ac_includes_default"
+if test "x$ac_cv_type_pid_t" = x""yes; then :
 
-ac_cv_type_pid_t=no
-fi
-rm -f conftest.err conftest.$ac_objext conftest.$ac_ext
-fi
-echo "$as_me:$LINENO: result: $ac_cv_type_pid_t" >&5
-echo "${ECHO_T}$ac_cv_type_pid_t" >&6
-if test $ac_cv_type_pid_t = yes; then
-  :
 else
 
 cat >>confdefs.h <<_ACEOF
@@ -5550,157 +5323,62 @@ _ACEOF
 
 fi
 
-echo "$as_me:$LINENO: checking return type of signal handlers" >&5
-echo $ECHO_N "checking return type of signal handlers... $ECHO_C" >&6
-if test "${ac_cv_type_signal+set}" = set; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking return type of signal handlers" >&5
+$as_echo_n "checking return type of signal handlers... " >&6; }
+if test "${ac_cv_type_signal+set}" = set; then :
+  $as_echo_n "(cached) " >&6
 else
-  cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h.  */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
+  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
 /* end confdefs.h.  */
 #include <sys/types.h>
 #include <signal.h>
-#ifdef signal
-# undef signal
-#endif
-#ifdef __cplusplus
-extern "C" void (*signal (int, void (*)(int)))(int);
-#else
-void (*signal ()) ();
-#endif
 
 int
 main ()
 {
-int i;
+return *(signal (0, 0)) (0) == 1;
   ;
   return 0;
 }
 _ACEOF
-rm -f conftest.$ac_objext
-if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
-  (eval $ac_compile) 2>conftest.er1
-  ac_status=$?
-  grep -v '^ *+' conftest.er1 >conftest.err
-  rm -f conftest.er1
-  cat conftest.err >&5
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } &&
-	 { ac_try='test -z "$ac_c_werror_flag"
-			 || test ! -s conftest.err'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; } &&
-	 { ac_try='test -s conftest.$ac_objext'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; }; then
-  ac_cv_type_signal=void
+if ac_fn_c_try_compile "$LINENO"; then :
+  ac_cv_type_signal=int
 else
-  echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-ac_cv_type_signal=int
+  ac_cv_type_signal=void
 fi
-rm -f conftest.err conftest.$ac_objext conftest.$ac_ext
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
 fi
-echo "$as_me:$LINENO: result: $ac_cv_type_signal" >&5
-echo "${ECHO_T}$ac_cv_type_signal" >&6
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_type_signal" >&5
+$as_echo "$ac_cv_type_signal" >&6; }
 
 cat >>confdefs.h <<_ACEOF
 #define RETSIGTYPE $ac_cv_type_signal
 _ACEOF
 
 
-echo "$as_me:$LINENO: checking for size_t" >&5
-echo $ECHO_N "checking for size_t... $ECHO_C" >&6
-if test "${ac_cv_type_size_t+set}" = set; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
-else
-  cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h.  */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h.  */
-$ac_includes_default
-int
-main ()
-{
-if ((size_t *) 0)
-  return 0;
-if (sizeof (size_t))
-  return 0;
-  ;
-  return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext
-if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
-  (eval $ac_compile) 2>conftest.er1
-  ac_status=$?
-  grep -v '^ *+' conftest.er1 >conftest.err
-  rm -f conftest.er1
-  cat conftest.err >&5
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } &&
-	 { ac_try='test -z "$ac_c_werror_flag"
-			 || test ! -s conftest.err'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; } &&
-	 { ac_try='test -s conftest.$ac_objext'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; }; then
-  ac_cv_type_size_t=yes
-else
-  echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
+ac_fn_c_check_type "$LINENO" "size_t" "ac_cv_type_size_t" "$ac_includes_default"
+if test "x$ac_cv_type_size_t" = x""yes; then :
 
-ac_cv_type_size_t=no
-fi
-rm -f conftest.err conftest.$ac_objext conftest.$ac_ext
-fi
-echo "$as_me:$LINENO: result: $ac_cv_type_size_t" >&5
-echo "${ECHO_T}$ac_cv_type_size_t" >&6
-if test $ac_cv_type_size_t = yes; then
-  :
 else
 
 cat >>confdefs.h <<_ACEOF
-#define size_t unsigned
+#define size_t unsigned int
 _ACEOF
 
 fi
 
-echo "$as_me:$LINENO: checking for uid_t in sys/types.h" >&5
-echo $ECHO_N "checking for uid_t in sys/types.h... $ECHO_C" >&6
-if test "${ac_cv_type_uid_t+set}" = set; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for uid_t in sys/types.h" >&5
+$as_echo_n "checking for uid_t in sys/types.h... " >&6; }
+if test "${ac_cv_type_uid_t+set}" = set; then :
+  $as_echo_n "(cached) " >&6
 else
-  cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h.  */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
+  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
 /* end confdefs.h.  */
 #include <sys/types.h>
 
 _ACEOF
 if (eval "$ac_cpp conftest.$ac_ext") 2>&5 |
-  $EGREP "uid_t" >/dev/null 2>&1; then
+  $EGREP "uid_t" >/dev/null 2>&1; then :
   ac_cv_type_uid_t=yes
 else
   ac_cv_type_uid_t=no
@@ -5708,359 +5386,55 @@ fi
 rm -f conftest*
 
 fi
-echo "$as_me:$LINENO: result: $ac_cv_type_uid_t" >&5
-echo "${ECHO_T}$ac_cv_type_uid_t" >&6
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_type_uid_t" >&5
+$as_echo "$ac_cv_type_uid_t" >&6; }
 if test $ac_cv_type_uid_t = no; then
 
-cat >>confdefs.h <<\_ACEOF
-#define uid_t int
-_ACEOF
+$as_echo "#define uid_t int" >>confdefs.h
 
 
-cat >>confdefs.h <<\_ACEOF
-#define gid_t int
-_ACEOF
+$as_echo "#define gid_t int" >>confdefs.h
 
 fi
 
 
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
 for ac_func in access cfgetispeed cfgetospeed cfsetispeed cfsetospeed chdir chmod chown dup dup2 fchmod fchown fcntl fstat fstatfs getdirentries getegid geteuid getgid getpid getppid getrusage gettimeofday getuid ioctl kill link lseek lstat mkdir pipe readlink rmdir setreuid setregid stat sigprocmask stat symlink tcgetattr tcsetattr tcsendbreak tcdrain tcflush tcflow tcgetpgrp tcsetpgrp time umask unlink
-do
-as_ac_var=`echo "ac_cv_func_$ac_func" | $as_tr_sh`
-echo "$as_me:$LINENO: checking for $ac_func" >&5
-echo $ECHO_N "checking for $ac_func... $ECHO_C" >&6
-if eval "test \"\${$as_ac_var+set}\" = set"; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
-else
-  cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h.  */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h.  */
-/* Define $ac_func to an innocuous variant, in case <limits.h> declares $ac_func.
-   For example, HP-UX 11i <limits.h> declares gettimeofday.  */
-#define $ac_func innocuous_$ac_func
-
-/* System header to define __stub macros and hopefully few prototypes,
-    which can conflict with char $ac_func (); below.
-    Prefer <limits.h> to <assert.h> if __STDC__ is defined, since
-    <limits.h> exists even on freestanding compilers.  */
-
-#ifdef __STDC__
-# include <limits.h>
-#else
-# include <assert.h>
-#endif
-
-#undef $ac_func
-
-/* Override any gcc2 internal prototype to avoid an error.  */
-#ifdef __cplusplus
-extern "C"
-{
-#endif
-/* We use char because int might match the return type of a gcc2
-   builtin and then its argument prototype would still apply.  */
-char $ac_func ();
-/* The GNU C library defines this for functions which it implements
-    to always fail with ENOSYS.  Some functions are actually named
-    something starting with __ and the normal name is an alias.  */
-#if defined (__stub_$ac_func) || defined (__stub___$ac_func)
-choke me
-#else
-char (*f) () = $ac_func;
-#endif
-#ifdef __cplusplus
-}
-#endif
-
-int
-main ()
-{
-return f != $ac_func;
-  ;
-  return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext conftest$ac_exeext
-if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
-  (eval $ac_link) 2>conftest.er1
-  ac_status=$?
-  grep -v '^ *+' conftest.er1 >conftest.err
-  rm -f conftest.er1
-  cat conftest.err >&5
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } &&
-	 { ac_try='test -z "$ac_c_werror_flag"
-			 || test ! -s conftest.err'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; } &&
-	 { ac_try='test -s conftest$ac_exeext'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; }; then
-  eval "$as_ac_var=yes"
-else
-  echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-eval "$as_ac_var=no"
-fi
-rm -f conftest.err conftest.$ac_objext \
-      conftest$ac_exeext conftest.$ac_ext
-fi
-echo "$as_me:$LINENO: result: `eval echo '${'$as_ac_var'}'`" >&5
-echo "${ECHO_T}`eval echo '${'$as_ac_var'}'`" >&6
-if test `eval echo '${'$as_ac_var'}'` = yes; then
+do :
+  as_ac_var=`$as_echo "ac_cv_func_$ac_func" | $as_tr_sh`
+ac_fn_c_check_func "$LINENO" "$ac_func" "$as_ac_var"
+eval as_val=\$$as_ac_var
+   if test "x$as_val" = x""yes; then :
   cat >>confdefs.h <<_ACEOF
-#define `echo "HAVE_$ac_func" | $as_tr_cpp` 1
+#define `$as_echo "HAVE_$ac_func" | $as_tr_cpp` 1
 _ACEOF
 
 fi
 done
 
 
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
 for ac_header in fcntl.h stdlib.h string.h strings.h sys/ioctl.h sys/mount.h sys/param.h sys/resource.h sys/stat.h sys/termio.h sys/termios.h sys/time.h sys/times.h sys/types.h time.h unistd.h sys/vfs.h sys/statfs.h
-do
-as_ac_Header=`echo "ac_cv_header_$ac_header" | $as_tr_sh`
-if eval "test \"\${$as_ac_Header+set}\" = set"; then
-  echo "$as_me:$LINENO: checking for $ac_header" >&5
-echo $ECHO_N "checking for $ac_header... $ECHO_C" >&6
-if eval "test \"\${$as_ac_Header+set}\" = set"; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
-fi
-echo "$as_me:$LINENO: result: `eval echo '${'$as_ac_Header'}'`" >&5
-echo "${ECHO_T}`eval echo '${'$as_ac_Header'}'`" >&6
-else
-  # Is the header compilable?
-echo "$as_me:$LINENO: checking $ac_header usability" >&5
-echo $ECHO_N "checking $ac_header usability... $ECHO_C" >&6
-cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h.  */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h.  */
-$ac_includes_default
-#include <$ac_header>
-_ACEOF
-rm -f conftest.$ac_objext
-if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
-  (eval $ac_compile) 2>conftest.er1
-  ac_status=$?
-  grep -v '^ *+' conftest.er1 >conftest.err
-  rm -f conftest.er1
-  cat conftest.err >&5
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } &&
-	 { ac_try='test -z "$ac_c_werror_flag"
-			 || test ! -s conftest.err'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; } &&
-	 { ac_try='test -s conftest.$ac_objext'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; }; then
-  ac_header_compiler=yes
-else
-  echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-ac_header_compiler=no
-fi
-rm -f conftest.err conftest.$ac_objext conftest.$ac_ext
-echo "$as_me:$LINENO: result: $ac_header_compiler" >&5
-echo "${ECHO_T}$ac_header_compiler" >&6
-
-# Is the header present?
-echo "$as_me:$LINENO: checking $ac_header presence" >&5
-echo $ECHO_N "checking $ac_header presence... $ECHO_C" >&6
-cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h.  */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h.  */
-#include <$ac_header>
-_ACEOF
-if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5
-  (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1
-  ac_status=$?
-  grep -v '^ *+' conftest.er1 >conftest.err
-  rm -f conftest.er1
-  cat conftest.err >&5
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } >/dev/null; then
-  if test -s conftest.err; then
-    ac_cpp_err=$ac_c_preproc_warn_flag
-    ac_cpp_err=$ac_cpp_err$ac_c_werror_flag
-  else
-    ac_cpp_err=
-  fi
-else
-  ac_cpp_err=yes
-fi
-if test -z "$ac_cpp_err"; then
-  ac_header_preproc=yes
-else
-  echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-  ac_header_preproc=no
-fi
-rm -f conftest.err conftest.$ac_ext
-echo "$as_me:$LINENO: result: $ac_header_preproc" >&5
-echo "${ECHO_T}$ac_header_preproc" >&6
-
-# So?  What about this header?
-case $ac_header_compiler:$ac_header_preproc:$ac_c_preproc_warn_flag in
-  yes:no: )
-    { echo "$as_me:$LINENO: WARNING: $ac_header: accepted by the compiler, rejected by the preprocessor!" >&5
-echo "$as_me: WARNING: $ac_header: accepted by the compiler, rejected by the preprocessor!" >&2;}
-    { echo "$as_me:$LINENO: WARNING: $ac_header: proceeding with the compiler's result" >&5
-echo "$as_me: WARNING: $ac_header: proceeding with the compiler's result" >&2;}
-    ac_header_preproc=yes
-    ;;
-  no:yes:* )
-    { echo "$as_me:$LINENO: WARNING: $ac_header: present but cannot be compiled" >&5
-echo "$as_me: WARNING: $ac_header: present but cannot be compiled" >&2;}
-    { echo "$as_me:$LINENO: WARNING: $ac_header:     check for missing prerequisite headers?" >&5
-echo "$as_me: WARNING: $ac_header:     check for missing prerequisite headers?" >&2;}
-    { echo "$as_me:$LINENO: WARNING: $ac_header: see the Autoconf documentation" >&5
-echo "$as_me: WARNING: $ac_header: see the Autoconf documentation" >&2;}
-    { echo "$as_me:$LINENO: WARNING: $ac_header:     section \"Present But Cannot Be Compiled\"" >&5
-echo "$as_me: WARNING: $ac_header:     section \"Present But Cannot Be Compiled\"" >&2;}
-    { echo "$as_me:$LINENO: WARNING: $ac_header: proceeding with the preprocessor's result" >&5
-echo "$as_me: WARNING: $ac_header: proceeding with the preprocessor's result" >&2;}
-    { echo "$as_me:$LINENO: WARNING: $ac_header: in the future, the compiler will take precedence" >&5
-echo "$as_me: WARNING: $ac_header: in the future, the compiler will take precedence" >&2;}
-    (
-      cat <<\_ASBOX
-## ------------------------------------------ ##
-## Report this to the AC_PACKAGE_NAME lists.  ##
-## ------------------------------------------ ##
-_ASBOX
-    ) |
-      sed "s/^/$as_me: WARNING:     /" >&2
-    ;;
-esac
-echo "$as_me:$LINENO: checking for $ac_header" >&5
-echo $ECHO_N "checking for $ac_header... $ECHO_C" >&6
-if eval "test \"\${$as_ac_Header+set}\" = set"; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
-else
-  eval "$as_ac_Header=\$ac_header_preproc"
-fi
-echo "$as_me:$LINENO: result: `eval echo '${'$as_ac_Header'}'`" >&5
-echo "${ECHO_T}`eval echo '${'$as_ac_Header'}'`" >&6
-
-fi
-if test `eval echo '${'$as_ac_Header'}'` = yes; then
+do :
+  as_ac_Header=`$as_echo "ac_cv_header_$ac_header" | $as_tr_sh`
+ac_fn_c_check_header_mongrel "$LINENO" "$ac_header" "$as_ac_Header" "$ac_includes_default"
+eval as_val=\$$as_ac_Header
+   if test "x$as_val" = x""yes; then :
   cat >>confdefs.h <<_ACEOF
-#define `echo "HAVE_$ac_header" | $as_tr_cpp` 1
+#define `$as_echo "HAVE_$ac_header" | $as_tr_cpp` 1
 _ACEOF
 
 fi
 
 done
 
-
-
-
-
-
 ac_header_dirent=no
 for ac_hdr in dirent.h sys/ndir.h sys/dir.h ndir.h; do
-  as_ac_Header=`echo "ac_cv_header_dirent_$ac_hdr" | $as_tr_sh`
-echo "$as_me:$LINENO: checking for $ac_hdr that defines DIR" >&5
-echo $ECHO_N "checking for $ac_hdr that defines DIR... $ECHO_C" >&6
-if eval "test \"\${$as_ac_Header+set}\" = set"; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
-else
-  cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h.  */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
+  as_ac_Header=`$as_echo "ac_cv_header_dirent_$ac_hdr" | $as_tr_sh`
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_hdr that defines DIR" >&5
+$as_echo_n "checking for $ac_hdr that defines DIR... " >&6; }
+if { as_var=$as_ac_Header; eval "test \"\${$as_var+set}\" = set"; }; then :
+  $as_echo_n "(cached) " >&6
+else
+  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
 /* end confdefs.h.  */
 #include <sys/types.h>
 #include <$ac_hdr>
@@ -6074,42 +5448,20 @@ return 0;
   return 0;
 }
 _ACEOF
-rm -f conftest.$ac_objext
-if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
-  (eval $ac_compile) 2>conftest.er1
-  ac_status=$?
-  grep -v '^ *+' conftest.er1 >conftest.err
-  rm -f conftest.er1
-  cat conftest.err >&5
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } &&
-	 { ac_try='test -z "$ac_c_werror_flag"
-			 || test ! -s conftest.err'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; } &&
-	 { ac_try='test -s conftest.$ac_objext'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; }; then
+if ac_fn_c_try_compile "$LINENO"; then :
   eval "$as_ac_Header=yes"
 else
-  echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-eval "$as_ac_Header=no"
+  eval "$as_ac_Header=no"
 fi
-rm -f conftest.err conftest.$ac_objext conftest.$ac_ext
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
 fi
-echo "$as_me:$LINENO: result: `eval echo '${'$as_ac_Header'}'`" >&5
-echo "${ECHO_T}`eval echo '${'$as_ac_Header'}'`" >&6
-if test `eval echo '${'$as_ac_Header'}'` = yes; then
+eval ac_res=\$$as_ac_Header
+	       { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_res" >&5
+$as_echo "$ac_res" >&6; }
+eval as_val=\$$as_ac_Header
+   if test "x$as_val" = x""yes; then :
   cat >>confdefs.h <<_ACEOF
-#define `echo "HAVE_$ac_hdr" | $as_tr_cpp` 1
+#define `$as_echo "HAVE_$ac_hdr" | $as_tr_cpp` 1
 _ACEOF
 
 ac_header_dirent=$ac_hdr; break
@@ -6118,256 +5470,116 @@ fi
 done
 # Two versions of opendir et al. are in -ldir and -lx on SCO Xenix.
 if test $ac_header_dirent = dirent.h; then
-  echo "$as_me:$LINENO: checking for library containing opendir" >&5
-echo $ECHO_N "checking for library containing opendir... $ECHO_C" >&6
-if test "${ac_cv_search_opendir+set}" = set; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
+  { $as_echo "$as_me:${as_lineno-$LINENO}: checking for library containing opendir" >&5
+$as_echo_n "checking for library containing opendir... " >&6; }
+if test "${ac_cv_search_opendir+set}" = set; then :
+  $as_echo_n "(cached) " >&6
 else
   ac_func_search_save_LIBS=$LIBS
-ac_cv_search_opendir=no
-cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h.  */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
+cat confdefs.h - <<_ACEOF >conftest.$ac_ext
 /* end confdefs.h.  */
 
-/* Override any gcc2 internal prototype to avoid an error.  */
+/* Override any GCC internal prototype to avoid an error.
+   Use char because int might match the return type of a GCC
+   builtin and then its argument prototype would still apply.  */
 #ifdef __cplusplus
 extern "C"
 #endif
-/* We use char because int might match the return type of a gcc2
-   builtin and then its argument prototype would still apply.  */
 char opendir ();
 int
 main ()
 {
-opendir ();
+return opendir ();
   ;
   return 0;
 }
 _ACEOF
-rm -f conftest.$ac_objext conftest$ac_exeext
-if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
-  (eval $ac_link) 2>conftest.er1
-  ac_status=$?
-  grep -v '^ *+' conftest.er1 >conftest.err
-  rm -f conftest.er1
-  cat conftest.err >&5
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } &&
-	 { ac_try='test -z "$ac_c_werror_flag"
-			 || test ! -s conftest.err'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; } &&
-	 { ac_try='test -s conftest$ac_exeext'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; }; then
-  ac_cv_search_opendir="none required"
-else
-  echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-fi
-rm -f conftest.err conftest.$ac_objext \
-      conftest$ac_exeext conftest.$ac_ext
-if test "$ac_cv_search_opendir" = no; then
-  for ac_lib in dir; do
+for ac_lib in '' dir; do
+  if test -z "$ac_lib"; then
+    ac_res="none required"
+  else
+    ac_res=-l$ac_lib
     LIBS="-l$ac_lib  $ac_func_search_save_LIBS"
-    cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h.  */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h.  */
+  fi
+  if ac_fn_c_try_link "$LINENO"; then :
+  ac_cv_search_opendir=$ac_res
+fi
+rm -f core conftest.err conftest.$ac_objext \
+    conftest$ac_exeext
+  if test "${ac_cv_search_opendir+set}" = set; then :
+  break
+fi
+done
+if test "${ac_cv_search_opendir+set}" = set; then :
 
-/* Override any gcc2 internal prototype to avoid an error.  */
-#ifdef __cplusplus
-extern "C"
-#endif
-/* We use char because int might match the return type of a gcc2
-   builtin and then its argument prototype would still apply.  */
-char opendir ();
-int
-main ()
-{
-opendir ();
-  ;
-  return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext conftest$ac_exeext
-if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
-  (eval $ac_link) 2>conftest.er1
-  ac_status=$?
-  grep -v '^ *+' conftest.er1 >conftest.err
-  rm -f conftest.er1
-  cat conftest.err >&5
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } &&
-	 { ac_try='test -z "$ac_c_werror_flag"
-			 || test ! -s conftest.err'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; } &&
-	 { ac_try='test -s conftest$ac_exeext'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; }; then
-  ac_cv_search_opendir="-l$ac_lib"
-break
 else
-  echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-fi
-rm -f conftest.err conftest.$ac_objext \
-      conftest$ac_exeext conftest.$ac_ext
-  done
+  ac_cv_search_opendir=no
 fi
+rm conftest.$ac_ext
 LIBS=$ac_func_search_save_LIBS
 fi
-echo "$as_me:$LINENO: result: $ac_cv_search_opendir" >&5
-echo "${ECHO_T}$ac_cv_search_opendir" >&6
-if test "$ac_cv_search_opendir" != no; then
-  test "$ac_cv_search_opendir" = "none required" || LIBS="$ac_cv_search_opendir $LIBS"
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_search_opendir" >&5
+$as_echo "$ac_cv_search_opendir" >&6; }
+ac_res=$ac_cv_search_opendir
+if test "$ac_res" != no; then :
+  test "$ac_res" = "none required" || LIBS="$ac_res $LIBS"
 
 fi
 
 else
-  echo "$as_me:$LINENO: checking for library containing opendir" >&5
-echo $ECHO_N "checking for library containing opendir... $ECHO_C" >&6
-if test "${ac_cv_search_opendir+set}" = set; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
+  { $as_echo "$as_me:${as_lineno-$LINENO}: checking for library containing opendir" >&5
+$as_echo_n "checking for library containing opendir... " >&6; }
+if test "${ac_cv_search_opendir+set}" = set; then :
+  $as_echo_n "(cached) " >&6
 else
   ac_func_search_save_LIBS=$LIBS
-ac_cv_search_opendir=no
-cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h.  */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
+cat confdefs.h - <<_ACEOF >conftest.$ac_ext
 /* end confdefs.h.  */
 
-/* Override any gcc2 internal prototype to avoid an error.  */
+/* Override any GCC internal prototype to avoid an error.
+   Use char because int might match the return type of a GCC
+   builtin and then its argument prototype would still apply.  */
 #ifdef __cplusplus
 extern "C"
 #endif
-/* We use char because int might match the return type of a gcc2
-   builtin and then its argument prototype would still apply.  */
 char opendir ();
 int
 main ()
 {
-opendir ();
+return opendir ();
   ;
   return 0;
 }
 _ACEOF
-rm -f conftest.$ac_objext conftest$ac_exeext
-if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
-  (eval $ac_link) 2>conftest.er1
-  ac_status=$?
-  grep -v '^ *+' conftest.er1 >conftest.err
-  rm -f conftest.er1
-  cat conftest.err >&5
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } &&
-	 { ac_try='test -z "$ac_c_werror_flag"
-			 || test ! -s conftest.err'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; } &&
-	 { ac_try='test -s conftest$ac_exeext'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; }; then
-  ac_cv_search_opendir="none required"
-else
-  echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-fi
-rm -f conftest.err conftest.$ac_objext \
-      conftest$ac_exeext conftest.$ac_ext
-if test "$ac_cv_search_opendir" = no; then
-  for ac_lib in x; do
+for ac_lib in '' x; do
+  if test -z "$ac_lib"; then
+    ac_res="none required"
+  else
+    ac_res=-l$ac_lib
     LIBS="-l$ac_lib  $ac_func_search_save_LIBS"
-    cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h.  */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h.  */
+  fi
+  if ac_fn_c_try_link "$LINENO"; then :
+  ac_cv_search_opendir=$ac_res
+fi
+rm -f core conftest.err conftest.$ac_objext \
+    conftest$ac_exeext
+  if test "${ac_cv_search_opendir+set}" = set; then :
+  break
+fi
+done
+if test "${ac_cv_search_opendir+set}" = set; then :
 
-/* Override any gcc2 internal prototype to avoid an error.  */
-#ifdef __cplusplus
-extern "C"
-#endif
-/* We use char because int might match the return type of a gcc2
-   builtin and then its argument prototype would still apply.  */
-char opendir ();
-int
-main ()
-{
-opendir ();
-  ;
-  return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext conftest$ac_exeext
-if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
-  (eval $ac_link) 2>conftest.er1
-  ac_status=$?
-  grep -v '^ *+' conftest.er1 >conftest.err
-  rm -f conftest.er1
-  cat conftest.err >&5
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } &&
-	 { ac_try='test -z "$ac_c_werror_flag"
-			 || test ! -s conftest.err'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; } &&
-	 { ac_try='test -s conftest$ac_exeext'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; }; then
-  ac_cv_search_opendir="-l$ac_lib"
-break
 else
-  echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-fi
-rm -f conftest.err conftest.$ac_objext \
-      conftest$ac_exeext conftest.$ac_ext
-  done
+  ac_cv_search_opendir=no
 fi
+rm conftest.$ac_ext
 LIBS=$ac_func_search_save_LIBS
 fi
-echo "$as_me:$LINENO: result: $ac_cv_search_opendir" >&5
-echo "${ECHO_T}$ac_cv_search_opendir" >&6
-if test "$ac_cv_search_opendir" != no; then
-  test "$ac_cv_search_opendir" = "none required" || LIBS="$ac_cv_search_opendir $LIBS"
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_search_opendir" >&5
+$as_echo "$ac_cv_search_opendir" >&6; }
+ac_res=$ac_cv_search_opendir
+if test "$ac_res" != no; then :
+  test "$ac_res" = "none required" || LIBS="$ac_res $LIBS"
 
 fi
 
@@ -6375,16 +5587,12 @@ fi
 
 
 sim_termio=""
-echo "$as_me:$LINENO: checking for struct termios" >&5
-echo $ECHO_N "checking for struct termios... $ECHO_C" >&6
-if test "${ac_cv_termios_struct+set}" = set; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for struct termios" >&5
+$as_echo_n "checking for struct termios... " >&6; }
+if test "${ac_cv_termios_struct+set}" = set; then :
+  $as_echo_n "(cached) " >&6
 else
-  cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h.  */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
+  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
 /* end confdefs.h.  */
 #include <sys/types.h>
 #include <sys/termios.h>
@@ -6401,55 +5609,27 @@ static struct termios x;
   return 0;
 }
 _ACEOF
-rm -f conftest.$ac_objext
-if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
-  (eval $ac_compile) 2>conftest.er1
-  ac_status=$?
-  grep -v '^ *+' conftest.er1 >conftest.err
-  rm -f conftest.er1
-  cat conftest.err >&5
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } &&
-	 { ac_try='test -z "$ac_c_werror_flag"
-			 || test ! -s conftest.err'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; } &&
-	 { ac_try='test -s conftest.$ac_objext'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; }; then
+if ac_fn_c_try_compile "$LINENO"; then :
   ac_cv_termios_struct=yes
 else
-  echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-ac_cv_termios_struct=no
+  ac_cv_termios_struct=no
 fi
-rm -f conftest.err conftest.$ac_objext conftest.$ac_ext
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
 fi
 
-echo "$as_me:$LINENO: result: $ac_cv_termios_struct" >&5
-echo "${ECHO_T}$ac_cv_termios_struct" >&6
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_termios_struct" >&5
+$as_echo "$ac_cv_termios_struct" >&6; }
 if test $ac_cv_termios_struct = yes; then
   sim_termio="$sim_termio -DHAVE_TERMIOS_STRUCTURE"
 fi
 
 if test "$ac_cv_termios_struct" = "yes"; then
-  echo "$as_me:$LINENO: checking for c_line field in struct termios" >&5
-echo $ECHO_N "checking for c_line field in struct termios... $ECHO_C" >&6
-  if test "${ac_cv_termios_cline+set}" = set; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
+  { $as_echo "$as_me:${as_lineno-$LINENO}: checking for c_line field in struct termios" >&5
+$as_echo_n "checking for c_line field in struct termios... " >&6; }
+  if test "${ac_cv_termios_cline+set}" = set; then :
+  $as_echo_n "(cached) " >&6
 else
-  cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h.  */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
+  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
 /* end confdefs.h.  */
 #include <sys/types.h>
 #include <sys/termios.h>
@@ -6461,41 +5641,17 @@ static struct termios x; x.c_line = 0;
   return 0;
 }
 _ACEOF
-rm -f conftest.$ac_objext
-if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
-  (eval $ac_compile) 2>conftest.er1
-  ac_status=$?
-  grep -v '^ *+' conftest.er1 >conftest.err
-  rm -f conftest.er1
-  cat conftest.err >&5
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } &&
-	 { ac_try='test -z "$ac_c_werror_flag"
-			 || test ! -s conftest.err'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; } &&
-	 { ac_try='test -s conftest.$ac_objext'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; }; then
+if ac_fn_c_try_compile "$LINENO"; then :
   ac_cv_termios_cline=yes
 else
-  echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-ac_cv_termios_cline=no
+  ac_cv_termios_cline=no
 fi
-rm -f conftest.err conftest.$ac_objext conftest.$ac_ext
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
 fi
 
 
-  echo "$as_me:$LINENO: result: $ac_cv_termios_cline" >&5
-echo "${ECHO_T}$ac_cv_termios_cline" >&6
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_termios_cline" >&5
+$as_echo "$ac_cv_termios_cline" >&6; }
   if test $ac_cv_termios_cline = yes; then
     sim_termio="$sim_termio -DHAVE_TERMIOS_CLINE"
   fi
@@ -6504,16 +5660,12 @@ else
 fi
 
 if test "$ac_cv_termios_struct" != "yes"; then
-  echo "$as_me:$LINENO: checking for struct termio" >&5
-echo $ECHO_N "checking for struct termio... $ECHO_C" >&6
-  if test "${ac_cv_termio_struct+set}" = set; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
+  { $as_echo "$as_me:${as_lineno-$LINENO}: checking for struct termio" >&5
+$as_echo_n "checking for struct termio... " >&6; }
+  if test "${ac_cv_termio_struct+set}" = set; then :
+  $as_echo_n "(cached) " >&6
 else
-  cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h.  */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
+  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
 /* end confdefs.h.  */
 #include <sys/types.h>
 #include <sys/termio.h>
@@ -6530,40 +5682,16 @@ static struct termio x;
   return 0;
 }
 _ACEOF
-rm -f conftest.$ac_objext
-if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
-  (eval $ac_compile) 2>conftest.er1
-  ac_status=$?
-  grep -v '^ *+' conftest.er1 >conftest.err
-  rm -f conftest.er1
-  cat conftest.err >&5
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } &&
-	 { ac_try='test -z "$ac_c_werror_flag"
-			 || test ! -s conftest.err'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; } &&
-	 { ac_try='test -s conftest.$ac_objext'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; }; then
+if ac_fn_c_try_compile "$LINENO"; then :
   ac_cv_termio_struct=yes
 else
-  echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-ac_cv_termio_struct=no
+  ac_cv_termio_struct=no
 fi
-rm -f conftest.err conftest.$ac_objext conftest.$ac_ext
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
 fi
 
-  echo "$as_me:$LINENO: result: $ac_cv_termio_struct" >&5
-echo "${ECHO_T}$ac_cv_termio_struct" >&6
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_termio_struct" >&5
+$as_echo "$ac_cv_termio_struct" >&6; }
   if test $ac_cv_termio_struct = yes; then
     sim_termio="$sim_termio -DHAVE_TERMIO_STRUCTURE"
   fi
@@ -6572,16 +5700,12 @@ else
 fi
 
 if test "$ac_cv_termio_struct" = "yes"; then
-  echo "$as_me:$LINENO: checking for c_line field in struct termio" >&5
-echo $ECHO_N "checking for c_line field in struct termio... $ECHO_C" >&6
-  if test "${ac_cv_termio_cline+set}" = set; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
+  { $as_echo "$as_me:${as_lineno-$LINENO}: checking for c_line field in struct termio" >&5
+$as_echo_n "checking for c_line field in struct termio... " >&6; }
+  if test "${ac_cv_termio_cline+set}" = set; then :
+  $as_echo_n "(cached) " >&6
 else
-  cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h.  */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
+  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
 /* end confdefs.h.  */
 #include <sys/types.h>
 #include <sys/termio.h>
@@ -6593,41 +5717,17 @@ static struct termio x; x.c_line = 0;
   return 0;
 }
 _ACEOF
-rm -f conftest.$ac_objext
-if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
-  (eval $ac_compile) 2>conftest.er1
-  ac_status=$?
-  grep -v '^ *+' conftest.er1 >conftest.err
-  rm -f conftest.er1
-  cat conftest.err >&5
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } &&
-	 { ac_try='test -z "$ac_c_werror_flag"
-			 || test ! -s conftest.err'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; } &&
-	 { ac_try='test -s conftest.$ac_objext'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; }; then
+if ac_fn_c_try_compile "$LINENO"; then :
   ac_cv_termio_cline=yes
 else
-  echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-ac_cv_termio_cline=no
+  ac_cv_termio_cline=no
 fi
-rm -f conftest.err conftest.$ac_objext conftest.$ac_ext
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
 fi
 
 
-  echo "$as_me:$LINENO: result: $ac_cv_termio_cline" >&5
-echo "${ECHO_T}$ac_cv_termio_cline" >&6
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_termio_cline" >&5
+$as_echo "$ac_cv_termio_cline" >&6; }
   if test $ac_cv_termio_cline = yes; then
     sim_termio="$sim_termio -DHAVE_TERMIO_CLINE"
   fi
@@ -6635,16 +5735,12 @@ else
   ac_cv_termio_cline=no
 fi
 
-echo "$as_me:$LINENO: checking for struct statfs" >&5
-echo $ECHO_N "checking for struct statfs... $ECHO_C" >&6
-if test "${ac_cv_struct_statfs+set}" = set; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for struct statfs" >&5
+$as_echo_n "checking for struct statfs... " >&6; }
+if test "${ac_cv_struct_statfs+set}" = set; then :
+  $as_echo_n "(cached) " >&6
 else
-  cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h.  */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
+  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
 /* end confdefs.h.  */
 #include <sys/types.h>
 #ifdef HAVE_SYS_PARAM_H
@@ -6667,105 +5763,24 @@ static struct statfs s;
   return 0;
 }
 _ACEOF
-rm -f conftest.$ac_objext
-if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
-  (eval $ac_compile) 2>conftest.er1
-  ac_status=$?
-  grep -v '^ *+' conftest.er1 >conftest.err
-  rm -f conftest.er1
-  cat conftest.err >&5
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } &&
-	 { ac_try='test -z "$ac_c_werror_flag"
-			 || test ! -s conftest.err'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; } &&
-	 { ac_try='test -s conftest.$ac_objext'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; }; then
+if ac_fn_c_try_compile "$LINENO"; then :
   ac_cv_struct_statfs=yes
 else
-  echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-ac_cv_struct_statfs=no
+  ac_cv_struct_statfs=no
 fi
-rm -f conftest.err conftest.$ac_objext conftest.$ac_ext
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
 fi
 
-echo "$as_me:$LINENO: result: $ac_cv_struct_statfs" >&5
-echo "${ECHO_T}$ac_cv_struct_statfs" >&6
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_struct_statfs" >&5
+$as_echo "$ac_cv_struct_statfs" >&6; }
 if test $ac_cv_struct_statfs = yes; then
 
-cat >>confdefs.h <<\_ACEOF
-#define HAVE_STRUCT_STATFS 1
-_ACEOF
+$as_echo "#define HAVE_STRUCT_STATFS 1" >>confdefs.h
 
 fi
 
-echo "$as_me:$LINENO: checking for long long" >&5
-echo $ECHO_N "checking for long long... $ECHO_C" >&6
-if test "${ac_cv_type_long_long+set}" = set; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
-else
-  cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h.  */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h.  */
-$ac_includes_default
-int
-main ()
-{
-if ((long long *) 0)
-  return 0;
-if (sizeof (long long))
-  return 0;
-  ;
-  return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext
-if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
-  (eval $ac_compile) 2>conftest.er1
-  ac_status=$?
-  grep -v '^ *+' conftest.er1 >conftest.err
-  rm -f conftest.er1
-  cat conftest.err >&5
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } &&
-	 { ac_try='test -z "$ac_c_werror_flag"
-			 || test ! -s conftest.err'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; } &&
-	 { ac_try='test -s conftest.$ac_objext'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; }; then
-  ac_cv_type_long_long=yes
-else
-  echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-ac_cv_type_long_long=no
-fi
-rm -f conftest.err conftest.$ac_objext conftest.$ac_ext
-fi
-echo "$as_me:$LINENO: result: $ac_cv_type_long_long" >&5
-echo "${ECHO_T}$ac_cv_type_long_long" >&6
-if test $ac_cv_type_long_long = yes; then
+ac_fn_c_check_type "$LINENO" "long long" "ac_cv_type_long_long" "$ac_includes_default"
+if test "x$ac_cv_type_long_long" = x""yes; then :
 
 cat >>confdefs.h <<_ACEOF
 #define HAVE_LONG_LONG 1
@@ -6776,19 +5791,15 @@ fi
 
 
 sim_devzero=""
-echo "$as_me:$LINENO: checking for /dev/zero" >&5
-echo $ECHO_N "checking for /dev/zero... $ECHO_C" >&6
-if test "${ac_cv_devzero+set}" = set; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for /dev/zero" >&5
+$as_echo_n "checking for /dev/zero... " >&6; }
+if test "${ac_cv_devzero+set}" = set; then :
+  $as_echo_n "(cached) " >&6
 else
-  if test "$cross_compiling" = yes; then
+  if test "$cross_compiling" = yes; then :
   ac_cv_devzero=no
 else
-  cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h.  */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
+  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
 /* end confdefs.h.  */
 #include <fcntl.h>
 main () {
@@ -6807,62 +5818,49 @@ main () {
   return 0;
 }
 _ACEOF
-rm -f conftest$ac_exeext
-if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
-  (eval $ac_link) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } && { ac_try='./conftest$ac_exeext'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; }; then
+if ac_fn_c_try_run "$LINENO"; then :
   ac_cv_devzero=yes
 else
-  echo "$as_me: program exited with status $ac_status" >&5
-echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-( exit $ac_status )
-ac_cv_devzero=no
+  ac_cv_devzero=no
 fi
-rm -f core *.core gmon.out bb.out conftest$ac_exeext conftest.$ac_objext conftest.$ac_ext
+rm -f core *.core core.conftest.* gmon.out bb.out conftest$ac_exeext \
+  conftest.$ac_objext conftest.beam conftest.$ac_ext
 fi
+
 fi
 
-echo "$as_me:$LINENO: result: $ac_cv_devzero" >&5
-echo "${ECHO_T}$ac_cv_devzero" >&6
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_devzero" >&5
+$as_echo "$ac_cv_devzero" >&6; }
 if test $ac_cv_devzero = yes; then
   sim_devzero="-DHAVE_DEVZERO"
 else
   sim_devzero=""
 fi
 
-echo "$as_me:$LINENO: checking for common simulator directory" >&5
-echo $ECHO_N "checking for common simulator directory... $ECHO_C" >&6
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for common simulator directory" >&5
+$as_echo_n "checking for common simulator directory... " >&6; }
 if test -f "${srcdir}/../common/callback.c"; then
-  echo "$as_me:$LINENO: result: yes" >&5
-echo "${ECHO_T}yes" >&6
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5
+$as_echo "yes" >&6; }
   sim_callback="callback.o targ-map.o"
   sim_targ_vals="targ-vals.h targ-map.c targ-vals.def"
 else
-  echo "$as_me:$LINENO: result: no" >&5
-echo "${ECHO_T}no" >&6
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
   sim_callback=""
   sim_targ_vals=""
 fi
 
-echo "$as_me:$LINENO: checking for common simulator directory fpu implementation" >&5
-echo $ECHO_N "checking for common simulator directory fpu implementation... $ECHO_C" >&6
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for common simulator directory fpu implementation" >&5
+$as_echo_n "checking for common simulator directory fpu implementation... " >&6; }
 if test -f "${srcdir}/../common/sim-fpu.c"; then
-  echo "$as_me:$LINENO: result: yes" >&5
-echo "${ECHO_T}yes" >&6
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5
+$as_echo "yes" >&6; }
   sim_fpu_cflags="-DHAVE_COMMON_FPU -I../common -I${srcdir}/../common"
   sim_fpu="sim-fpu.o"
 else
-  echo "$as_me:$LINENO: result: no" >&5
-echo "${ECHO_T}no" >&6
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
   sim_fpu_cflags=
   sim_fpu=
 fi
@@ -6878,10 +5876,10 @@ AR=${AR-ar}
 if test -n "$ac_tool_prefix"; then
   # Extract the first word of "${ac_tool_prefix}ranlib", so it can be a program name with args.
 set dummy ${ac_tool_prefix}ranlib; ac_word=$2
-echo "$as_me:$LINENO: checking for $ac_word" >&5
-echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
-if test "${ac_cv_prog_RANLIB+set}" = set; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if test "${ac_cv_prog_RANLIB+set}" = set; then :
+  $as_echo_n "(cached) " >&6
 else
   if test -n "$RANLIB"; then
   ac_cv_prog_RANLIB="$RANLIB" # Let the user override the test.
@@ -6891,35 +5889,37 @@ for as_dir in $PATH
 do
   IFS=$as_save_IFS
   test -z "$as_dir" && as_dir=.
-  for ac_exec_ext in '' $ac_executable_extensions; do
-  if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+    for ac_exec_ext in '' $ac_executable_extensions; do
+  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
     ac_cv_prog_RANLIB="${ac_tool_prefix}ranlib"
-    echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
+    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
     break 2
   fi
 done
-done
+  done
+IFS=$as_save_IFS
 
 fi
 fi
 RANLIB=$ac_cv_prog_RANLIB
 if test -n "$RANLIB"; then
-  echo "$as_me:$LINENO: result: $RANLIB" >&5
-echo "${ECHO_T}$RANLIB" >&6
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $RANLIB" >&5
+$as_echo "$RANLIB" >&6; }
 else
-  echo "$as_me:$LINENO: result: no" >&5
-echo "${ECHO_T}no" >&6
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
 fi
 
+
 fi
 if test -z "$ac_cv_prog_RANLIB"; then
   ac_ct_RANLIB=$RANLIB
   # Extract the first word of "ranlib", so it can be a program name with args.
 set dummy ranlib; ac_word=$2
-echo "$as_me:$LINENO: checking for $ac_word" >&5
-echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
-if test "${ac_cv_prog_ac_ct_RANLIB+set}" = set; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if test "${ac_cv_prog_ac_ct_RANLIB+set}" = set; then :
+  $as_echo_n "(cached) " >&6
 else
   if test -n "$ac_ct_RANLIB"; then
   ac_cv_prog_ac_ct_RANLIB="$ac_ct_RANLIB" # Let the user override the test.
@@ -6929,28 +5929,38 @@ for as_dir in $PATH
 do
   IFS=$as_save_IFS
   test -z "$as_dir" && as_dir=.
-  for ac_exec_ext in '' $ac_executable_extensions; do
-  if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+    for ac_exec_ext in '' $ac_executable_extensions; do
+  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
     ac_cv_prog_ac_ct_RANLIB="ranlib"
-    echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
+    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
     break 2
   fi
 done
-done
+  done
+IFS=$as_save_IFS
 
-  test -z "$ac_cv_prog_ac_ct_RANLIB" && ac_cv_prog_ac_ct_RANLIB=":"
 fi
 fi
 ac_ct_RANLIB=$ac_cv_prog_ac_ct_RANLIB
 if test -n "$ac_ct_RANLIB"; then
-  echo "$as_me:$LINENO: result: $ac_ct_RANLIB" >&5
-echo "${ECHO_T}$ac_ct_RANLIB" >&6
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_RANLIB" >&5
+$as_echo "$ac_ct_RANLIB" >&6; }
 else
-  echo "$as_me:$LINENO: result: no" >&5
-echo "${ECHO_T}no" >&6
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
 fi
 
-  RANLIB=$ac_ct_RANLIB
+  if test "x$ac_ct_RANLIB" = x; then
+    RANLIB=":"
+  else
+    case $cross_compiling:$ac_tool_warned in
+yes:)
+{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5
+$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
+ac_tool_warned=yes ;;
+esac
+    RANLIB=$ac_ct_RANLIB
+  fi
 else
   RANLIB="$ac_cv_prog_RANLIB"
 fi
@@ -7000,8 +6010,10 @@ fi
 
 
 
-          ac_config_files="$ac_config_files Makefile"
-          ac_config_commands="$ac_config_commands default"
+ac_config_files="$ac_config_files Makefile"
+
+ac_config_commands="$ac_config_commands default"
+
 cat >confcache <<\_ACEOF
 # This file is a shell script that caches the results of configure
 # tests run on this system so they can be shared between configure
@@ -7020,39 +6032,59 @@ _ACEOF
 
 # The following way of writing the cache mishandles newlines in values,
 # but we know of no workaround that is simple, portable, and efficient.
-# So, don't put newlines in cache variables' values.
+# So, we kill variables containing newlines.
 # Ultrix sh set writes to stderr and can't be redirected directly,
 # and sets the high bit in the cache file unless we assign to the vars.
-{
+(
+  for ac_var in `(set) 2>&1 | sed -n 's/^\([a-zA-Z_][a-zA-Z0-9_]*\)=.*/\1/p'`; do
+    eval ac_val=\$$ac_var
+    case $ac_val in #(
+    *${as_nl}*)
+      case $ac_var in #(
+      *_cv_*) { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: cache variable $ac_var contains a newline" >&5
+$as_echo "$as_me: WARNING: cache variable $ac_var contains a newline" >&2;} ;;
+      esac
+      case $ac_var in #(
+      _ | IFS | as_nl) ;; #(
+      BASH_ARGV | BASH_SOURCE) eval $ac_var= ;; #(
+      *) { eval $ac_var=; unset $ac_var;} ;;
+      esac ;;
+    esac
+  done
+
   (set) 2>&1 |
-    case `(ac_space=' '; set | grep ac_space) 2>&1` in
-    *ac_space=\ *)
-      # `set' does not quote correctly, so add quotes (double-quote
-      # substitution turns \\\\ into \\, and sed turns \\ into \).
+    case $as_nl`(ac_space=' '; set) 2>&1` in #(
+    *${as_nl}ac_space=\ *)
+      # `set' does not quote correctly, so add quotes: double-quote
+      # substitution turns \\\\ into \\, and sed turns \\ into \.
       sed -n \
 	"s/'/'\\\\''/g;
 	  s/^\\([_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\\)=\\(.*\\)/\\1='\\2'/p"
-      ;;
+      ;; #(
     *)
       # `set' quotes correctly as required by POSIX, so do not add quotes.
-      sed -n \
-	"s/^\\([_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\\)=\\(.*\\)/\\1=\\2/p"
+      sed -n "/^[_$as_cr_alnum]*_cv_[_$as_cr_alnum]*=/p"
       ;;
-    esac;
-} |
+    esac |
+    sort
+) |
   sed '
+     /^ac_cv_env_/b end
      t clear
-     : clear
+     :clear
      s/^\([^=]*\)=\(.*[{}].*\)$/test "${\1+set}" = set || &/
      t end
-     /^ac_cv_env/!s/^\([^=]*\)=\(.*\)$/\1=${\1=\2}/
-     : end' >>confcache
-if diff $cache_file confcache >/dev/null 2>&1; then :; else
-  if test -w $cache_file; then
-    test "x$cache_file" != "x/dev/null" && echo "updating cache $cache_file"
+     s/^\([^=]*\)=\(.*\)$/\1=${\1=\2}/
+     :end' >>confcache
+if diff "$cache_file" confcache >/dev/null 2>&1; then :; else
+  if test -w "$cache_file"; then
+    test "x$cache_file" != "x/dev/null" &&
+      { $as_echo "$as_me:${as_lineno-$LINENO}: updating cache $cache_file" >&5
+$as_echo "$as_me: updating cache $cache_file" >&6;}
     cat confcache >$cache_file
   else
-    echo "not updating unwritable cache $cache_file"
+    { $as_echo "$as_me:${as_lineno-$LINENO}: not updating unwritable cache $cache_file" >&5
+$as_echo "$as_me: not updating unwritable cache $cache_file" >&6;}
   fi
 fi
 rm -f confcache
@@ -7061,32 +6093,18 @@ test "x$prefix" = xNONE && prefix=$ac_default_prefix
 # Let make expand exec_prefix.
 test "x$exec_prefix" = xNONE && exec_prefix='${prefix}'
 
-# VPATH may cause trouble with some makes, so we remove $(srcdir),
-# ${srcdir} and @srcdir@ from VPATH if srcdir is ".", strip leading and
-# trailing colons and then remove the whole line if VPATH becomes empty
-# (actually we leave an empty line to preserve line numbers).
-if test "x$srcdir" = x.; then
-  ac_vpsub='/^[	 ]*VPATH[	 ]*=/{
-s/:*\$(srcdir):*/:/;
-s/:*\${srcdir}:*/:/;
-s/:*@srcdir@:*/:/;
-s/^\([^=]*=[	 ]*\):*/\1/;
-s/:*$//;
-s/^[^=]*=[	 ]*$//;
-}'
-fi
-
 DEFS=-DHAVE_CONFIG_H
 
 ac_libobjs=
 ac_ltlibobjs=
 for ac_i in : $LIBOBJS; do test "x$ac_i" = x: && continue
   # 1. Remove the extension, and $U if already installed.
-  ac_i=`echo "$ac_i" |
-	 sed 's/\$U\././;s/\.o$//;s/\.obj$//'`
-  # 2. Add them.
-  ac_libobjs="$ac_libobjs $ac_i\$U.$ac_objext"
-  ac_ltlibobjs="$ac_ltlibobjs $ac_i"'$U.lo'
+  ac_script='s/\$U\././;s/\.o$//;s/\.obj$//'
+  ac_i=`$as_echo "$ac_i" | sed "$ac_script"`
+  # 2. Prepend LIBOBJDIR.  When used with automake>=1.10 LIBOBJDIR
+  #    will be set to the directory where LIBOBJS objects are built.
+  as_fn_append ac_libobjs " \${LIBOBJDIR}$ac_i\$U.$ac_objext"
+  as_fn_append ac_ltlibobjs " \${LIBOBJDIR}$ac_i"'$U.lo'
 done
 LIBOBJS=$ac_libobjs
 
@@ -7094,12 +6112,15 @@ LTLIBOBJS=$ac_ltlibobjs
 
 
 
+
 : ${CONFIG_STATUS=./config.status}
+ac_write_fail=0
 ac_clean_files_save=$ac_clean_files
 ac_clean_files="$ac_clean_files $CONFIG_STATUS"
-{ echo "$as_me:$LINENO: creating $CONFIG_STATUS" >&5
-echo "$as_me: creating $CONFIG_STATUS" >&6;}
-cat >$CONFIG_STATUS <<_ACEOF
+{ $as_echo "$as_me:${as_lineno-$LINENO}: creating $CONFIG_STATUS" >&5
+$as_echo "$as_me: creating $CONFIG_STATUS" >&6;}
+as_write_fail=0
+cat >$CONFIG_STATUS <<_ASEOF || as_write_fail=1
 #! $SHELL
 # Generated by $as_me.
 # Run this file to recreate the current configuration.
@@ -7109,81 +6130,252 @@ cat >$CONFIG_STATUS <<_ACEOF
 debug=false
 ac_cs_recheck=false
 ac_cs_silent=false
-SHELL=\${CONFIG_SHELL-$SHELL}
-_ACEOF
 
-cat >>$CONFIG_STATUS <<\_ACEOF
-## --------------------- ##
-## M4sh Initialization.  ##
-## --------------------- ##
-
-# Be Bourne compatible
-if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then
+SHELL=\${CONFIG_SHELL-$SHELL}
+export SHELL
+_ASEOF
+cat >>$CONFIG_STATUS <<\_ASEOF || as_write_fail=1
+## -------------------- ##
+## M4sh Initialization. ##
+## -------------------- ##
+
+# Be more Bourne compatible
+DUALCASE=1; export DUALCASE # for MKS sh
+if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then :
   emulate sh
   NULLCMD=:
-  # Zsh 3.x and 4.x performs word splitting on ${1+"$@"}, which
+  # Pre-4.2 versions of Zsh do word splitting on ${1+"$@"}, which
   # is contrary to our usage.  Disable this feature.
   alias -g '${1+"$@"}'='"$@"'
-elif test -n "${BASH_VERSION+set}" && (set -o posix) >/dev/null 2>&1; then
-  set -o posix
+  setopt NO_GLOB_SUBST
+else
+  case `(set -o) 2>/dev/null` in #(
+  *posix*) :
+    set -o posix ;; #(
+  *) :
+     ;;
+esac
 fi
-DUALCASE=1; export DUALCASE # for MKS sh
 
-# Support unset when possible.
-if ( (MAIL=60; unset MAIL) || exit) >/dev/null 2>&1; then
-  as_unset=unset
-else
-  as_unset=false
+
+as_nl='
+'
+export as_nl
+# Printing a long string crashes Solaris 7 /usr/bin/printf.
+as_echo='\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\'
+as_echo=$as_echo$as_echo$as_echo$as_echo$as_echo
+as_echo=$as_echo$as_echo$as_echo$as_echo$as_echo$as_echo
+# Prefer a ksh shell builtin over an external printf program on Solaris,
+# but without wasting forks for bash or zsh.
+if test -z "$BASH_VERSION$ZSH_VERSION" \
+    && (test "X`print -r -- $as_echo`" = "X$as_echo") 2>/dev/null; then
+  as_echo='print -r --'
+  as_echo_n='print -rn --'
+elif (test "X`printf %s $as_echo`" = "X$as_echo") 2>/dev/null; then
+  as_echo='printf %s\n'
+  as_echo_n='printf %s'
+else
+  if test "X`(/usr/ucb/echo -n -n $as_echo) 2>/dev/null`" = "X-n $as_echo"; then
+    as_echo_body='eval /usr/ucb/echo -n "$1$as_nl"'
+    as_echo_n='/usr/ucb/echo -n'
+  else
+    as_echo_body='eval expr "X$1" : "X\\(.*\\)"'
+    as_echo_n_body='eval
+      arg=$1;
+      case $arg in #(
+      *"$as_nl"*)
+	expr "X$arg" : "X\\(.*\\)$as_nl";
+	arg=`expr "X$arg" : ".*$as_nl\\(.*\\)"`;;
+      esac;
+      expr "X$arg" : "X\\(.*\\)" | tr -d "$as_nl"
+    '
+    export as_echo_n_body
+    as_echo_n='sh -c $as_echo_n_body as_echo'
+  fi
+  export as_echo_body
+  as_echo='sh -c $as_echo_body as_echo'
+fi
+
+# The user is always right.
+if test "${PATH_SEPARATOR+set}" != set; then
+  PATH_SEPARATOR=:
+  (PATH='/bin;/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 && {
+    (PATH='/bin:/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 ||
+      PATH_SEPARATOR=';'
+  }
 fi
 
 
-# Work around bugs in pre-3.0 UWIN ksh.
-$as_unset ENV MAIL MAILPATH
+# IFS
+# We need space, tab and new line, in precisely that order.  Quoting is
+# there to prevent editors from complaining about space-tab.
+# (If _AS_PATH_WALK were called with IFS unset, it would disable word
+# splitting by setting IFS to empty value.)
+IFS=" ""	$as_nl"
+
+# Find who we are.  Look in the path if we contain no directory separator.
+case $0 in #((
+  *[\\/]* ) as_myself=$0 ;;
+  *) as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    test -r "$as_dir/$0" && as_myself=$as_dir/$0 && break
+  done
+IFS=$as_save_IFS
+
+     ;;
+esac
+# We did not find ourselves, most probably we were run as `sh COMMAND'
+# in which case we are not to be found in the path.
+if test "x$as_myself" = x; then
+  as_myself=$0
+fi
+if test ! -f "$as_myself"; then
+  $as_echo "$as_myself: error: cannot find myself; rerun with an absolute file name" >&2
+  exit 1
+fi
+
+# Unset variables that we do not need and which cause bugs (e.g. in
+# pre-3.0 UWIN ksh).  But do not cause bugs in bash 2.01; the "|| exit 1"
+# suppresses any "Segmentation fault" message there.  '((' could
+# trigger a bug in pdksh 5.2.14.
+for as_var in BASH_ENV ENV MAIL MAILPATH
+do eval test x\${$as_var+set} = xset \
+  && ( (unset $as_var) || exit 1) >/dev/null 2>&1 && unset $as_var || :
+done
 PS1='$ '
 PS2='> '
 PS4='+ '
 
 # NLS nuisances.
-for as_var in \
-  LANG LANGUAGE LC_ADDRESS LC_ALL LC_COLLATE LC_CTYPE LC_IDENTIFICATION \
-  LC_MEASUREMENT LC_MESSAGES LC_MONETARY LC_NAME LC_NUMERIC LC_PAPER \
-  LC_TELEPHONE LC_TIME
-do
-  if (set +x; test -z "`(eval $as_var=C; export $as_var) 2>&1`"); then
-    eval $as_var=C; export $as_var
-  else
-    $as_unset $as_var
+LC_ALL=C
+export LC_ALL
+LANGUAGE=C
+export LANGUAGE
+
+# CDPATH.
+(unset CDPATH) >/dev/null 2>&1 && unset CDPATH
+
+
+# as_fn_error ERROR [LINENO LOG_FD]
+# ---------------------------------
+# Output "`basename $0`: error: ERROR" to stderr. If LINENO and LOG_FD are
+# provided, also output the error to LOG_FD, referencing LINENO. Then exit the
+# script with status $?, using 1 if that was 0.
+as_fn_error ()
+{
+  as_status=$?; test $as_status -eq 0 && as_status=1
+  if test "$3"; then
+    as_lineno=${as_lineno-"$2"} as_lineno_stack=as_lineno_stack=$as_lineno_stack
+    $as_echo "$as_me:${as_lineno-$LINENO}: error: $1" >&$3
   fi
-done
+  $as_echo "$as_me: error: $1" >&2
+  as_fn_exit $as_status
+} # as_fn_error
+
+
+# as_fn_set_status STATUS
+# -----------------------
+# Set $? to STATUS, without forking.
+as_fn_set_status ()
+{
+  return $1
+} # as_fn_set_status
+
+# as_fn_exit STATUS
+# -----------------
+# Exit the shell with STATUS, even in a "trap 0" or "set -e" context.
+as_fn_exit ()
+{
+  set +e
+  as_fn_set_status $1
+  exit $1
+} # as_fn_exit
+
+# as_fn_unset VAR
+# ---------------
+# Portably unset VAR.
+as_fn_unset ()
+{
+  { eval $1=; unset $1;}
+}
+as_unset=as_fn_unset
+# as_fn_append VAR VALUE
+# ----------------------
+# Append the text in VALUE to the end of the definition contained in VAR. Take
+# advantage of any shell optimizations that allow amortized linear growth over
+# repeated appends, instead of the typical quadratic growth present in naive
+# implementations.
+if (eval "as_var=1; as_var+=2; test x\$as_var = x12") 2>/dev/null; then :
+  eval 'as_fn_append ()
+  {
+    eval $1+=\$2
+  }'
+else
+  as_fn_append ()
+  {
+    eval $1=\$$1\$2
+  }
+fi # as_fn_append
+
+# as_fn_arith ARG...
+# ------------------
+# Perform arithmetic evaluation on the ARGs, and store the result in the
+# global $as_val. Take advantage of shells that can avoid forks. The arguments
+# must be portable across $(()) and expr.
+if (eval "test \$(( 1 + 1 )) = 2") 2>/dev/null; then :
+  eval 'as_fn_arith ()
+  {
+    as_val=$(( $* ))
+  }'
+else
+  as_fn_arith ()
+  {
+    as_val=`expr "$@" || test $? -eq 1`
+  }
+fi # as_fn_arith
+
 
-# Required to use basename.
-if expr a : '\(a\)' >/dev/null 2>&1; then
+if expr a : '\(a\)' >/dev/null 2>&1 &&
+   test "X`expr 00001 : '.*\(...\)'`" = X001; then
   as_expr=expr
 else
   as_expr=false
 fi
 
-if (basename /) >/dev/null 2>&1 && test "X`basename / 2>&1`" = "X/"; then
+if (basename -- /) >/dev/null 2>&1 && test "X`basename -- / 2>&1`" = "X/"; then
   as_basename=basename
 else
   as_basename=false
 fi
 
+if (as_dir=`dirname -- /` && test "X$as_dir" = X/) >/dev/null 2>&1; then
+  as_dirname=dirname
+else
+  as_dirname=false
+fi
 
-# Name of the executable.
-as_me=`$as_basename "$0" ||
+as_me=`$as_basename -- "$0" ||
 $as_expr X/"$0" : '.*/\([^/][^/]*\)/*$' \| \
 	 X"$0" : 'X\(//\)$' \| \
-	 X"$0" : 'X\(/\)$' \| \
-	 .     : '\(.\)' 2>/dev/null ||
-echo X/"$0" |
-    sed '/^.*\/\([^/][^/]*\)\/*$/{ s//\1/; q; }
-  	  /^X\/\(\/\/\)$/{ s//\1/; q; }
-  	  /^X\/\(\/\).*/{ s//\1/; q; }
-  	  s/.*/./; q'`
-
+	 X"$0" : 'X\(/\)' \| . 2>/dev/null ||
+$as_echo X/"$0" |
+    sed '/^.*\/\([^/][^/]*\)\/*$/{
+	    s//\1/
+	    q
+	  }
+	  /^X\/\(\/\/\)$/{
+	    s//\1/
+	    q
+	  }
+	  /^X\/\(\/\).*/{
+	    s//\1/
+	    q
+	  }
+	  s/.*/./; q'`
 
-# PATH needs CR, and LINENO needs CR and PATH.
 # Avoid depending upon Character Ranges.
 as_cr_letters='abcdefghijklmnopqrstuvwxyz'
 as_cr_LETTERS='ABCDEFGHIJKLMNOPQRSTUVWXYZ'
@@ -7191,148 +6383,123 @@ as_cr_Letters=$as_cr_letters$as_cr_LETTERS
 as_cr_digits='0123456789'
 as_cr_alnum=$as_cr_Letters$as_cr_digits
 
-# The user is always right.
-if test "${PATH_SEPARATOR+set}" != set; then
-  echo "#! /bin/sh" >conf$$.sh
-  echo  "exit 0"   >>conf$$.sh
-  chmod +x conf$$.sh
-  if (PATH="/nonexistent;."; conf$$.sh) >/dev/null 2>&1; then
-    PATH_SEPARATOR=';'
-  else
-    PATH_SEPARATOR=:
-  fi
-  rm -f conf$$.sh
-fi
-
-
-  as_lineno_1=$LINENO
-  as_lineno_2=$LINENO
-  as_lineno_3=`(expr $as_lineno_1 + 1) 2>/dev/null`
-  test "x$as_lineno_1" != "x$as_lineno_2" &&
-  test "x$as_lineno_3"  = "x$as_lineno_2"  || {
-  # Find who we are.  Look in the path if we contain no path at all
-  # relative or not.
-  case $0 in
-    *[\\/]* ) as_myself=$0 ;;
-    *) as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
-  IFS=$as_save_IFS
-  test -z "$as_dir" && as_dir=.
-  test -r "$as_dir/$0" && as_myself=$as_dir/$0 && break
-done
-
-       ;;
-  esac
-  # We did not find ourselves, most probably we were run as `sh COMMAND'
-  # in which case we are not to be found in the path.
-  if test "x$as_myself" = x; then
-    as_myself=$0
-  fi
-  if test ! -f "$as_myself"; then
-    { { echo "$as_me:$LINENO: error: cannot find myself; rerun with an absolute path" >&5
-echo "$as_me: error: cannot find myself; rerun with an absolute path" >&2;}
-   { (exit 1); exit 1; }; }
-  fi
-  case $CONFIG_SHELL in
-  '')
-    as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in /bin$PATH_SEPARATOR/usr/bin$PATH_SEPARATOR$PATH
-do
-  IFS=$as_save_IFS
-  test -z "$as_dir" && as_dir=.
-  for as_base in sh bash ksh sh5; do
-	 case $as_dir in
-	 /*)
-	   if ("$as_dir/$as_base" -c '
-  as_lineno_1=$LINENO
-  as_lineno_2=$LINENO
-  as_lineno_3=`(expr $as_lineno_1 + 1) 2>/dev/null`
-  test "x$as_lineno_1" != "x$as_lineno_2" &&
-  test "x$as_lineno_3"  = "x$as_lineno_2" ') 2>/dev/null; then
-	     $as_unset BASH_ENV || test "${BASH_ENV+set}" != set || { BASH_ENV=; export BASH_ENV; }
-	     $as_unset ENV || test "${ENV+set}" != set || { ENV=; export ENV; }
-	     CONFIG_SHELL=$as_dir/$as_base
-	     export CONFIG_SHELL
-	     exec "$CONFIG_SHELL" "$0" ${1+"$@"}
-	   fi;;
-	 esac
-       done
-done
-;;
-  esac
-
-  # Create $as_me.lineno as a copy of $as_myself, but with $LINENO
-  # uniformly replaced by the line number.  The first 'sed' inserts a
-  # line-number line before each line; the second 'sed' does the real
-  # work.  The second script uses 'N' to pair each line-number line
-  # with the numbered line, and appends trailing '-' during
-  # substitution so that $LINENO is not a special case at line end.
-  # (Raja R Harinath suggested sed '=', and Paul Eggert wrote the
-  # second 'sed' script.  Blame Lee E. McMahon for sed's syntax.  :-)
-  sed '=' <$as_myself |
-    sed '
-      N
-      s,$,-,
-      : loop
-      s,^\(['$as_cr_digits']*\)\(.*\)[$]LINENO\([^'$as_cr_alnum'_]\),\1\2\1\3,
-      t loop
-      s,-$,,
-      s,^['$as_cr_digits']*\n,,
-    ' >$as_me.lineno &&
-  chmod +x $as_me.lineno ||
-    { { echo "$as_me:$LINENO: error: cannot create $as_me.lineno; rerun with a POSIX shell" >&5
-echo "$as_me: error: cannot create $as_me.lineno; rerun with a POSIX shell" >&2;}
-   { (exit 1); exit 1; }; }
-
-  # Don't try to exec as it changes $[0], causing all sort of problems
-  # (the dirname of $[0] is not the place where we might find the
-  # original and so on.  Autoconf is especially sensible to this).
-  . ./$as_me.lineno
-  # Exit status is that of the last command.
-  exit
-}
-
-
-case `echo "testing\c"; echo 1,2,3`,`echo -n testing; echo 1,2,3` in
-  *c*,-n*) ECHO_N= ECHO_C='
-' ECHO_T='	' ;;
-  *c*,*  ) ECHO_N=-n ECHO_C= ECHO_T= ;;
-  *)       ECHO_N= ECHO_C='\c' ECHO_T= ;;
+ECHO_C= ECHO_N= ECHO_T=
+case `echo -n x` in #(((((
+-n*)
+  case `echo 'xy\c'` in
+  *c*) ECHO_T='	';;	# ECHO_T is single tab character.
+  xy)  ECHO_C='\c';;
+  *)   echo `echo ksh88 bug on AIX 6.1` > /dev/null
+       ECHO_T='	';;
+  esac;;
+*)
+  ECHO_N='-n';;
 esac
 
-if expr a : '\(a\)' >/dev/null 2>&1; then
-  as_expr=expr
+rm -f conf$$ conf$$.exe conf$$.file
+if test -d conf$$.dir; then
+  rm -f conf$$.dir/conf$$.file
 else
-  as_expr=false
+  rm -f conf$$.dir
+  mkdir conf$$.dir 2>/dev/null
 fi
-
-rm -f conf$$ conf$$.exe conf$$.file
-echo >conf$$.file
-if ln -s conf$$.file conf$$ 2>/dev/null; then
-  # We could just check for DJGPP; but this test a) works b) is more generic
-  # and c) will remain valid once DJGPP supports symlinks (DJGPP 2.04).
-  if test -f conf$$.exe; then
-    # Don't use ln at all; we don't have any links
-    as_ln_s='cp -p'
-  else
+if (echo >conf$$.file) 2>/dev/null; then
+  if ln -s conf$$.file conf$$ 2>/dev/null; then
     as_ln_s='ln -s'
+    # ... but there are two gotchas:
+    # 1) On MSYS, both `ln -s file dir' and `ln file dir' fail.
+    # 2) DJGPP < 2.04 has no symlinks; `ln -s' creates a wrapper executable.
+    # In both cases, we have to default to `cp -p'.
+    ln -s conf$$.file conf$$.dir 2>/dev/null && test ! -f conf$$.exe ||
+      as_ln_s='cp -p'
+  elif ln conf$$.file conf$$ 2>/dev/null; then
+    as_ln_s=ln
+  else
+    as_ln_s='cp -p'
   fi
-elif ln conf$$.file conf$$ 2>/dev/null; then
-  as_ln_s=ln
 else
   as_ln_s='cp -p'
 fi
-rm -f conf$$ conf$$.exe conf$$.file
+rm -f conf$$ conf$$.exe conf$$.dir/conf$$.file conf$$.file
+rmdir conf$$.dir 2>/dev/null
+
+
+# as_fn_mkdir_p
+# -------------
+# Create "$as_dir" as a directory, including parents if necessary.
+as_fn_mkdir_p ()
+{
+
+  case $as_dir in #(
+  -*) as_dir=./$as_dir;;
+  esac
+  test -d "$as_dir" || eval $as_mkdir_p || {
+    as_dirs=
+    while :; do
+      case $as_dir in #(
+      *\'*) as_qdir=`$as_echo "$as_dir" | sed "s/'/'\\\\\\\\''/g"`;; #'(
+      *) as_qdir=$as_dir;;
+      esac
+      as_dirs="'$as_qdir' $as_dirs"
+      as_dir=`$as_dirname -- "$as_dir" ||
+$as_expr X"$as_dir" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
+	 X"$as_dir" : 'X\(//\)[^/]' \| \
+	 X"$as_dir" : 'X\(//\)$' \| \
+	 X"$as_dir" : 'X\(/\)' \| . 2>/dev/null ||
+$as_echo X"$as_dir" |
+    sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{
+	    s//\1/
+	    q
+	  }
+	  /^X\(\/\/\)[^/].*/{
+	    s//\1/
+	    q
+	  }
+	  /^X\(\/\/\)$/{
+	    s//\1/
+	    q
+	  }
+	  /^X\(\/\).*/{
+	    s//\1/
+	    q
+	  }
+	  s/.*/./; q'`
+      test -d "$as_dir" && break
+    done
+    test -z "$as_dirs" || eval "mkdir $as_dirs"
+  } || test -d "$as_dir" || as_fn_error "cannot create directory $as_dir"
+
 
+} # as_fn_mkdir_p
 if mkdir -p . 2>/dev/null; then
-  as_mkdir_p=:
+  as_mkdir_p='mkdir -p "$as_dir"'
 else
   test -d ./-p && rmdir ./-p
   as_mkdir_p=false
 fi
 
-as_executable_p="test -f"
+if test -x / >/dev/null 2>&1; then
+  as_test_x='test -x'
+else
+  if ls -dL / >/dev/null 2>&1; then
+    as_ls_L_option=L
+  else
+    as_ls_L_option=
+  fi
+  as_test_x='
+    eval sh -c '\''
+      if test -d "$1"; then
+	test -d "$1/.";
+      else
+	case $1 in #(
+	-*)set "./$1";;
+	esac;
+	case `ls -ld'$as_ls_L_option' "$1" 2>/dev/null` in #((
+	???[sx]*):;;*)false;;esac;fi
+    '\'' sh
+  '
+fi
+as_executable_p=$as_test_x
 
 # Sed expression to map a string onto a valid CPP name.
 as_tr_cpp="eval sed 'y%*$as_cr_letters%P$as_cr_LETTERS%;s%[^_$as_cr_alnum]%_%g'"
@@ -7341,31 +6508,20 @@ as_tr_cpp="eval sed 'y%*$as_cr_letters%P$as_cr_LETTERS%;s%[^_$as_cr_alnum]%_%g'"
 as_tr_sh="eval sed 'y%*+%pp%;s%[^_$as_cr_alnum]%_%g'"
 
 
-# IFS
-# We need space, tab and new line, in precisely that order.
-as_nl='
-'
-IFS=" 	$as_nl"
-
-# CDPATH.
-$as_unset CDPATH
-
 exec 6>&1
-
-# Open the log real soon, to keep \$[0] and so on meaningful, and to
+## ----------------------------------- ##
+## Main body of $CONFIG_STATUS script. ##
+## ----------------------------------- ##
+_ASEOF
+test $as_write_fail = 0 && chmod +x $CONFIG_STATUS || ac_write_fail=1
+
+cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1
+# Save the log message, to keep $0 and so on meaningful, and to
 # report actual input values of CONFIG_FILES etc. instead of their
-# values after options handling.  Logging --version etc. is OK.
-exec 5>>config.log
-{
-  echo
-  sed 'h;s/./-/g;s/^.../## /;s/...$/ ##/;p;x;p;x' <<_ASBOX
-## Running $as_me. ##
-_ASBOX
-} >&5
-cat >&5 <<_CSEOF
-
+# values after options handling.
+ac_log="
 This file was extended by $as_me, which was
-generated by GNU Autoconf 2.59.  Invocation command line was
+generated by GNU Autoconf 2.64.  Invocation command line was
 
   CONFIG_FILES    = $CONFIG_FILES
   CONFIG_HEADERS  = $CONFIG_HEADERS
@@ -7373,45 +6529,46 @@ generated by GNU Autoconf 2.59.  Invocation command line was
   CONFIG_COMMANDS = $CONFIG_COMMANDS
   $ $0 $@
 
-_CSEOF
-echo "on `(hostname || uname -n) 2>/dev/null | sed 1q`" >&5
-echo >&5
+on `(hostname || uname -n) 2>/dev/null | sed 1q`
+"
+
 _ACEOF
 
-# Files that config.status was made for.
-if test -n "$ac_config_files"; then
-  echo "config_files=\"$ac_config_files\"" >>$CONFIG_STATUS
-fi
+case $ac_config_files in *"
+"*) set x $ac_config_files; shift; ac_config_files=$*;;
+esac
 
-if test -n "$ac_config_headers"; then
-  echo "config_headers=\"$ac_config_headers\"" >>$CONFIG_STATUS
-fi
+case $ac_config_headers in *"
+"*) set x $ac_config_headers; shift; ac_config_headers=$*;;
+esac
 
-if test -n "$ac_config_links"; then
-  echo "config_links=\"$ac_config_links\"" >>$CONFIG_STATUS
-fi
 
-if test -n "$ac_config_commands"; then
-  echo "config_commands=\"$ac_config_commands\"" >>$CONFIG_STATUS
-fi
+cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1
+# Files that config.status was made for.
+config_files="$ac_config_files"
+config_headers="$ac_config_headers"
+config_commands="$ac_config_commands"
 
-cat >>$CONFIG_STATUS <<\_ACEOF
+_ACEOF
 
+cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1
 ac_cs_usage="\
-\`$as_me' instantiates files from templates according to the
-current configuration.
+\`$as_me' instantiates files and other configuration actions
+from templates according to the current configuration.  Unless the files
+and actions are specified as TAGs, all are instantiated by default.
 
-Usage: $0 [OPTIONS] [FILE]...
+Usage: $0 [OPTION]... [TAG]...
 
   -h, --help       print this help, then exit
-  -V, --version    print version number, then exit
-  -q, --quiet      do not print progress messages
+  -V, --version    print version number and configuration settings, then exit
+  -q, --quiet, --silent
+                   do not print progress messages
   -d, --debug      don't remove temporary files
       --recheck    update $as_me by reconfiguring in the same conditions
-  --file=FILE[:TEMPLATE]
-		   instantiate the configuration file FILE
-  --header=FILE[:TEMPLATE]
-		   instantiate the configuration header FILE
+      --file=FILE[:TEMPLATE]
+                   instantiate the configuration file FILE
+      --header=FILE[:TEMPLATE]
+                   instantiate the configuration header FILE
 
 Configuration files:
 $config_files
@@ -7422,84 +6579,81 @@ $config_headers
 Configuration commands:
 $config_commands
 
-Report bugs to <bug-autoconf@gnu.org>."
-_ACEOF
+Report bugs to the package provider."
 
-cat >>$CONFIG_STATUS <<_ACEOF
+_ACEOF
+cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1
 ac_cs_version="\\
 config.status
-configured by $0, generated by GNU Autoconf 2.59,
-  with options \\"`echo "$ac_configure_args" | sed 's/[\\""\`\$]/\\\\&/g'`\\"
+configured by $0, generated by GNU Autoconf 2.64,
+  with options \\"`$as_echo "$ac_configure_args" | sed 's/^ //; s/[\\""\`\$]/\\\\&/g'`\\"
 
-Copyright (C) 2003 Free Software Foundation, Inc.
+Copyright (C) 2009 Free Software Foundation, Inc.
 This config.status script is free software; the Free Software Foundation
 gives unlimited permission to copy, distribute and modify it."
-srcdir=$srcdir
-INSTALL="$INSTALL"
+
+ac_pwd='$ac_pwd'
+srcdir='$srcdir'
+INSTALL='$INSTALL'
+test -n "\$AWK" || AWK=awk
 _ACEOF
 
-cat >>$CONFIG_STATUS <<\_ACEOF
-# If no file are specified by the user, then we need to provide default
-# value.  By we need to know if files were specified by the user.
+cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1
+# The default lists apply if the user does not specify any file.
 ac_need_defaults=:
 while test $# != 0
 do
   case $1 in
   --*=*)
-    ac_option=`expr "x$1" : 'x\([^=]*\)='`
-    ac_optarg=`expr "x$1" : 'x[^=]*=\(.*\)'`
+    ac_option=`expr "X$1" : 'X\([^=]*\)='`
+    ac_optarg=`expr "X$1" : 'X[^=]*=\(.*\)'`
     ac_shift=:
     ;;
-  -*)
+  *)
     ac_option=$1
     ac_optarg=$2
     ac_shift=shift
     ;;
-  *) # This is not an option, so the user has probably given explicit
-     # arguments.
-     ac_option=$1
-     ac_need_defaults=false;;
   esac
 
   case $ac_option in
   # Handling of the options.
-_ACEOF
-cat >>$CONFIG_STATUS <<\_ACEOF
   -recheck | --recheck | --rechec | --reche | --rech | --rec | --re | --r)
     ac_cs_recheck=: ;;
-  --version | --vers* | -V )
-    echo "$ac_cs_version"; exit 0 ;;
-  --he | --h)
-    # Conflict between --help and --header
-    { { echo "$as_me:$LINENO: error: ambiguous option: $1
-Try \`$0 --help' for more information." >&5
-echo "$as_me: error: ambiguous option: $1
-Try \`$0 --help' for more information." >&2;}
-   { (exit 1); exit 1; }; };;
-  --help | --hel | -h )
-    echo "$ac_cs_usage"; exit 0 ;;
-  --debug | --d* | -d )
+  --version | --versio | --versi | --vers | --ver | --ve | --v | -V )
+    $as_echo "$ac_cs_version"; exit ;;
+  --debug | --debu | --deb | --de | --d | -d )
     debug=: ;;
   --file | --fil | --fi | --f )
     $ac_shift
-    CONFIG_FILES="$CONFIG_FILES $ac_optarg"
+    case $ac_optarg in
+    *\'*) ac_optarg=`$as_echo "$ac_optarg" | sed "s/'/'\\\\\\\\''/g"` ;;
+    esac
+    as_fn_append CONFIG_FILES " '$ac_optarg'"
     ac_need_defaults=false;;
   --header | --heade | --head | --hea )
     $ac_shift
-    CONFIG_HEADERS="$CONFIG_HEADERS $ac_optarg"
+    case $ac_optarg in
+    *\'*) ac_optarg=`$as_echo "$ac_optarg" | sed "s/'/'\\\\\\\\''/g"` ;;
+    esac
+    as_fn_append CONFIG_HEADERS " '$ac_optarg'"
     ac_need_defaults=false;;
+  --he | --h)
+    # Conflict between --help and --header
+    as_fn_error "ambiguous option: \`$1'
+Try \`$0 --help' for more information.";;
+  --help | --hel | -h )
+    $as_echo "$ac_cs_usage"; exit ;;
   -q | -quiet | --quiet | --quie | --qui | --qu | --q \
   | -silent | --silent | --silen | --sile | --sil | --si | --s)
     ac_cs_silent=: ;;
 
   # This is an error.
-  -*) { { echo "$as_me:$LINENO: error: unrecognized option: $1
-Try \`$0 --help' for more information." >&5
-echo "$as_me: error: unrecognized option: $1
-Try \`$0 --help' for more information." >&2;}
-   { (exit 1); exit 1; }; } ;;
+  -*) as_fn_error "unrecognized option: \`$1'
+Try \`$0 --help' for more information." ;;
 
-  *) ac_config_targets="$ac_config_targets $1" ;;
+  *) as_fn_append ac_config_targets " $1"
+     ac_need_defaults=false ;;
 
   esac
   shift
@@ -7513,32 +6667,46 @@ if $ac_cs_silent; then
 fi
 
 _ACEOF
-cat >>$CONFIG_STATUS <<_ACEOF
+cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1
 if \$ac_cs_recheck; then
-  echo "running $SHELL $0 " $ac_configure_args \$ac_configure_extra_args " --no-create --no-recursion" >&6
-  exec $SHELL $0 $ac_configure_args \$ac_configure_extra_args --no-create --no-recursion
+  set X '$SHELL' '$0' $ac_configure_args \$ac_configure_extra_args --no-create --no-recursion
+  shift
+  \$as_echo "running CONFIG_SHELL=$SHELL \$*" >&6
+  CONFIG_SHELL='$SHELL'
+  export CONFIG_SHELL
+  exec "\$@"
 fi
 
 _ACEOF
+cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1
+exec 5>>config.log
+{
+  echo
+  sed 'h;s/./-/g;s/^.../## /;s/...$/ ##/;p;x;p;x' <<_ASBOX
+## Running $as_me. ##
+_ASBOX
+  $as_echo "$ac_log"
+} >&5
 
+_ACEOF
+cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1
+_ACEOF
 
+cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1
 
-
-
-cat >>$CONFIG_STATUS <<\_ACEOF
+# Handling of arguments.
 for ac_config_target in $ac_config_targets
 do
-  case "$ac_config_target" in
-  # Handling of arguments.
-  "Makefile" ) CONFIG_FILES="$CONFIG_FILES Makefile" ;;
-  "default" ) CONFIG_COMMANDS="$CONFIG_COMMANDS default" ;;
-  "config.h" ) CONFIG_HEADERS="$CONFIG_HEADERS config.h:config.in" ;;
-  *) { { echo "$as_me:$LINENO: error: invalid argument: $ac_config_target" >&5
-echo "$as_me: error: invalid argument: $ac_config_target" >&2;}
-   { (exit 1); exit 1; }; };;
+  case $ac_config_target in
+    "config.h") CONFIG_HEADERS="$CONFIG_HEADERS config.h:config.in" ;;
+    "Makefile") CONFIG_FILES="$CONFIG_FILES Makefile" ;;
+    "default") CONFIG_COMMANDS="$CONFIG_COMMANDS default" ;;
+
+  *) as_fn_error "invalid argument: \`$ac_config_target'" "$LINENO" 5;;
   esac
 done
 
+
 # If the user did not use the arguments to specify the items to instantiate,
 # then the envvar interface is used.  Set only those that are not.
 # We use the long form for the default assignment because of an extremely
@@ -7550,761 +6718,546 @@ if $ac_need_defaults; then
 fi
 
 # Have a temporary directory for convenience.  Make it in the build tree
-# simply because there is no reason to put it here, and in addition,
+# simply because there is no reason against having it here, and in addition,
 # creating and moving files from /tmp can sometimes cause problems.
-# Create a temporary directory, and hook for its removal unless debugging.
+# Hook for its removal unless debugging.
+# Note that there is a small window in which the directory will not be cleaned:
+# after its creation but before its name has been assigned to `$tmp'.
 $debug ||
 {
-  trap 'exit_status=$?; rm -rf $tmp && exit $exit_status' 0
-  trap '{ (exit 1); exit 1; }' 1 2 13 15
+  tmp=
+  trap 'exit_status=$?
+  { test -z "$tmp" || test ! -d "$tmp" || rm -fr "$tmp"; } && exit $exit_status
+' 0
+  trap 'as_fn_exit 1' 1 2 13 15
 }
-
 # Create a (secure) tmp directory for tmp files.
 
 {
-  tmp=`(umask 077 && mktemp -d -q "./confstatXXXXXX") 2>/dev/null` &&
+  tmp=`(umask 077 && mktemp -d "./confXXXXXX") 2>/dev/null` &&
   test -n "$tmp" && test -d "$tmp"
 }  ||
 {
-  tmp=./confstat$$-$RANDOM
-  (umask 077 && mkdir $tmp)
-} ||
+  tmp=./conf$$-$RANDOM
+  (umask 077 && mkdir "$tmp")
+} || as_fn_error "cannot create a temporary directory in ." "$LINENO" 5
+
+# Set up the scripts for CONFIG_FILES section.
+# No need to generate them if there are no CONFIG_FILES.
+# This happens for instance with `./config.status config.h'.
+if test -n "$CONFIG_FILES"; then
+
+
+ac_cr=`echo X | tr X '\015'`
+# On cygwin, bash can eat \r inside `` if the user requested igncr.
+# But we know of no other shell where ac_cr would be empty at this
+# point, so we can use a bashism as a fallback.
+if test "x$ac_cr" = x; then
+  eval ac_cr=\$\'\\r\'
+fi
+ac_cs_awk_cr=`$AWK 'BEGIN { print "a\rb" }' </dev/null 2>/dev/null`
+if test "$ac_cs_awk_cr" = "a${ac_cr}b"; then
+  ac_cs_awk_cr='\r'
+else
+  ac_cs_awk_cr=$ac_cr
+fi
+
+echo 'BEGIN {' >"$tmp/subs1.awk" &&
+_ACEOF
+
+
 {
-   echo "$me: cannot create a temporary directory in ." >&2
-   { (exit 1); exit 1; }
+  echo "cat >conf$$subs.awk <<_ACEOF" &&
+  echo "$ac_subst_vars" | sed 's/.*/&!$&$ac_delim/' &&
+  echo "_ACEOF"
+} >conf$$subs.sh ||
+  as_fn_error "could not make $CONFIG_STATUS" "$LINENO" 5
+ac_delim_num=`echo "$ac_subst_vars" | grep -c '$'`
+ac_delim='%!_!# '
+for ac_last_try in false false false false false :; do
+  . ./conf$$subs.sh ||
+    as_fn_error "could not make $CONFIG_STATUS" "$LINENO" 5
+
+  ac_delim_n=`sed -n "s/.*$ac_delim\$/X/p" conf$$subs.awk | grep -c X`
+  if test $ac_delim_n = $ac_delim_num; then
+    break
+  elif $ac_last_try; then
+    as_fn_error "could not make $CONFIG_STATUS" "$LINENO" 5
+  else
+    ac_delim="$ac_delim!$ac_delim _$ac_delim!! "
+  fi
+done
+rm -f conf$$subs.sh
+
+cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1
+cat >>"\$tmp/subs1.awk" <<\\_ACAWK &&
+_ACEOF
+sed -n '
+h
+s/^/S["/; s/!.*/"]=/
+p
+g
+s/^[^!]*!//
+:repl
+t repl
+s/'"$ac_delim"'$//
+t delim
+:nl
+h
+s/\(.\{148\}\).*/\1/
+t more1
+s/["\\]/\\&/g; s/^/"/; s/$/\\n"\\/
+p
+n
+b repl
+:more1
+s/["\\]/\\&/g; s/^/"/; s/$/"\\/
+p
+g
+s/.\{148\}//
+t nl
+:delim
+h
+s/\(.\{148\}\).*/\1/
+t more2
+s/["\\]/\\&/g; s/^/"/; s/$/"/
+p
+b
+:more2
+s/["\\]/\\&/g; s/^/"/; s/$/"\\/
+p
+g
+s/.\{148\}//
+t delim
+' <conf$$subs.awk | sed '
+/^[^""]/{
+  N
+  s/\n//
 }
+' >>$CONFIG_STATUS || ac_write_fail=1
+rm -f conf$$subs.awk
+cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1
+_ACAWK
+cat >>"\$tmp/subs1.awk" <<_ACAWK &&
+  for (key in S) S_is_set[key] = 1
+  FS = ""
 
-_ACEOF
+}
+{
+  line = $ 0
+  nfields = split(line, field, "@")
+  substed = 0
+  len = length(field[1])
+  for (i = 2; i < nfields; i++) {
+    key = field[i]
+    keylen = length(key)
+    if (S_is_set[key]) {
+      value = S[key]
+      line = substr(line, 1, len) "" value "" substr(line, len + keylen + 3)
+      len += length(value) + length(field[++i])
+      substed = 1
+    } else
+      len += 1 + keylen
+  }
 
-cat >>$CONFIG_STATUS <<_ACEOF
+  print line
+}
 
-#
-# CONFIG_FILES section.
-#
+_ACAWK
+_ACEOF
+cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1
+if sed "s/$ac_cr//" < /dev/null > /dev/null 2>&1; then
+  sed "s/$ac_cr\$//; s/$ac_cr/$ac_cs_awk_cr/g"
+else
+  cat
+fi < "$tmp/subs1.awk" > "$tmp/subs.awk" \
+  || as_fn_error "could not setup config files machinery" "$LINENO" 5
+_ACEOF
 
-# No need to generate the scripts if there are no CONFIG_FILES.
-# This happens for instance when ./config.status config.h
-if test -n "\$CONFIG_FILES"; then
-  # Protect against being on the right side of a sed subst in config.status.
-  sed 's/,@/@@/; s/@,/@@/; s/,;t t\$/@;t t/; /@;t t\$/s/[\\\\&,]/\\\\&/g;
-   s/@@/,@/; s/@@/@,/; s/@;t t\$/,;t t/' >\$tmp/subs.sed <<\\CEOF
-s,@sim_environment@,$sim_environment,;t t
-s,@sim_alignment@,$sim_alignment,;t t
-s,@sim_assert@,$sim_assert,;t t
-s,@sim_bitsize@,$sim_bitsize,;t t
-s,@sim_endian@,$sim_endian,;t t
-s,@sim_hostendian@,$sim_hostendian,;t t
-s,@sim_float@,$sim_float,;t t
-s,@sim_scache@,$sim_scache,;t t
-s,@sim_default_model@,$sim_default_model,;t t
-s,@sim_hw_cflags@,$sim_hw_cflags,;t t
-s,@sim_hw_objs@,$sim_hw_objs,;t t
-s,@sim_hw@,$sim_hw,;t t
-s,@sim_inline@,$sim_inline,;t t
-s,@sim_packages@,$sim_packages,;t t
-s,@sim_regparm@,$sim_regparm,;t t
-s,@sim_reserved_bits@,$sim_reserved_bits,;t t
-s,@sim_smp@,$sim_smp,;t t
-s,@sim_stdcall@,$sim_stdcall,;t t
-s,@sim_xor_endian@,$sim_xor_endian,;t t
-s,@WARN_CFLAGS@,$WARN_CFLAGS,;t t
-s,@WERROR_CFLAGS@,$WERROR_CFLAGS,;t t
-s,@SHELL@,$SHELL,;t t
-s,@PATH_SEPARATOR@,$PATH_SEPARATOR,;t t
-s,@PACKAGE_NAME@,$PACKAGE_NAME,;t t
-s,@PACKAGE_TARNAME@,$PACKAGE_TARNAME,;t t
-s,@PACKAGE_VERSION@,$PACKAGE_VERSION,;t t
-s,@PACKAGE_STRING@,$PACKAGE_STRING,;t t
-s,@PACKAGE_BUGREPORT@,$PACKAGE_BUGREPORT,;t t
-s,@exec_prefix@,$exec_prefix,;t t
-s,@prefix@,$prefix,;t t
-s,@program_transform_name@,$program_transform_name,;t t
-s,@bindir@,$bindir,;t t
-s,@sbindir@,$sbindir,;t t
-s,@libexecdir@,$libexecdir,;t t
-s,@datadir@,$datadir,;t t
-s,@sysconfdir@,$sysconfdir,;t t
-s,@sharedstatedir@,$sharedstatedir,;t t
-s,@localstatedir@,$localstatedir,;t t
-s,@libdir@,$libdir,;t t
-s,@includedir@,$includedir,;t t
-s,@oldincludedir@,$oldincludedir,;t t
-s,@infodir@,$infodir,;t t
-s,@mandir@,$mandir,;t t
-s,@build_alias@,$build_alias,;t t
-s,@host_alias@,$host_alias,;t t
-s,@target_alias@,$target_alias,;t t
-s,@DEFS@,$DEFS,;t t
-s,@ECHO_C@,$ECHO_C,;t t
-s,@ECHO_N@,$ECHO_N,;t t
-s,@ECHO_T@,$ECHO_T,;t t
-s,@LIBS@,$LIBS,;t t
-s,@INSTALL_PROGRAM@,$INSTALL_PROGRAM,;t t
-s,@INSTALL_SCRIPT@,$INSTALL_SCRIPT,;t t
-s,@INSTALL_DATA@,$INSTALL_DATA,;t t
-s,@CC@,$CC,;t t
-s,@CFLAGS@,$CFLAGS,;t t
-s,@LDFLAGS@,$LDFLAGS,;t t
-s,@CPPFLAGS@,$CPPFLAGS,;t t
-s,@ac_ct_CC@,$ac_ct_CC,;t t
-s,@EXEEXT@,$EXEEXT,;t t
-s,@OBJEXT@,$OBJEXT,;t t
-s,@USE_NLS@,$USE_NLS,;t t
-s,@LIBINTL@,$LIBINTL,;t t
-s,@LIBINTL_DEP@,$LIBINTL_DEP,;t t
-s,@INCINTL@,$INCINTL,;t t
-s,@XGETTEXT@,$XGETTEXT,;t t
-s,@GMSGFMT@,$GMSGFMT,;t t
-s,@POSUB@,$POSUB,;t t
-s,@CATALOGS@,$CATALOGS,;t t
-s,@DATADIRNAME@,$DATADIRNAME,;t t
-s,@INSTOBJEXT@,$INSTOBJEXT,;t t
-s,@GENCAT@,$GENCAT,;t t
-s,@CATOBJEXT@,$CATOBJEXT,;t t
-s,@PKGVERSION@,$PKGVERSION,;t t
-s,@REPORT_BUGS_TO@,$REPORT_BUGS_TO,;t t
-s,@REPORT_BUGS_TEXI@,$REPORT_BUGS_TEXI,;t t
-s,@build@,$build,;t t
-s,@build_cpu@,$build_cpu,;t t
-s,@build_vendor@,$build_vendor,;t t
-s,@build_os@,$build_os,;t t
-s,@host@,$host,;t t
-s,@host_cpu@,$host_cpu,;t t
-s,@host_vendor@,$host_vendor,;t t
-s,@host_os@,$host_os,;t t
-s,@target@,$target,;t t
-s,@target_cpu@,$target_cpu,;t t
-s,@target_vendor@,$target_vendor,;t t
-s,@target_os@,$target_os,;t t
-s,@CPP@,$CPP,;t t
-s,@EGREP@,$EGREP,;t t
-s,@LIBOBJS@,$LIBOBJS,;t t
-s,@CC_FOR_BUILD@,$CC_FOR_BUILD,;t t
-s,@CFLAGS_FOR_BUILD@,$CFLAGS_FOR_BUILD,;t t
-s,@HDEFINES@,$HDEFINES,;t t
-s,@AR@,$AR,;t t
-s,@RANLIB@,$RANLIB,;t t
-s,@ac_ct_RANLIB@,$ac_ct_RANLIB,;t t
-s,@sim_cflags@,$sim_cflags,;t t
-s,@sim_warnings@,$sim_warnings,;t t
-s,@sim_line_nr@,$sim_line_nr,;t t
-s,@sim_config@,$sim_config,;t t
-s,@sim_opcode@,$sim_opcode,;t t
-s,@sim_switch@,$sim_switch,;t t
-s,@sim_dup@,$sim_dup,;t t
-s,@sim_decode_mechanism@,$sim_decode_mechanism,;t t
-s,@sim_jump@,$sim_jump,;t t
-s,@sim_filter@,$sim_filter,;t t
-s,@sim_icache@,$sim_icache,;t t
-s,@sim_hw_src@,$sim_hw_src,;t t
-s,@sim_hw_obj@,$sim_hw_obj,;t t
-s,@sim_pk_src@,$sim_pk_src,;t t
-s,@sim_pk_obj@,$sim_pk_obj,;t t
-s,@sim_bswap@,$sim_bswap,;t t
-s,@sim_igen_smp@,$sim_igen_smp,;t t
-s,@sim_hostbitsize@,$sim_hostbitsize,;t t
-s,@sim_env@,$sim_env,;t t
-s,@sim_timebase@,$sim_timebase,;t t
-s,@sim_trace@,$sim_trace,;t t
-s,@sim_reserved@,$sim_reserved,;t t
-s,@sim_monitor@,$sim_monitor,;t t
-s,@sim_model@,$sim_model,;t t
-s,@sim_model_issue@,$sim_model_issue,;t t
-s,@sim_stdio@,$sim_stdio,;t t
-s,@sim_termio@,$sim_termio,;t t
-s,@sim_devzero@,$sim_devzero,;t t
-s,@sim_callback@,$sim_callback,;t t
-s,@sim_targ_vals@,$sim_targ_vals,;t t
-s,@sim_fpu_cflags@,$sim_fpu_cflags,;t t
-s,@sim_fpu@,$sim_fpu,;t t
-s,@LTLIBOBJS@,$LTLIBOBJS,;t t
-CEOF
+# VPATH may cause trouble with some makes, so we remove $(srcdir),
+# ${srcdir} and @srcdir@ from VPATH if srcdir is ".", strip leading and
+# trailing colons and then remove the whole line if VPATH becomes empty
+# (actually we leave an empty line to preserve line numbers).
+if test "x$srcdir" = x.; then
+  ac_vpsub='/^[	 ]*VPATH[	 ]*=/{
+s/:*\$(srcdir):*/:/
+s/:*\${srcdir}:*/:/
+s/:*@srcdir@:*/:/
+s/^\([^=]*=[	 ]*\):*/\1/
+s/:*$//
+s/^[^=]*=[	 ]*$//
+}'
+fi
+
+cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1
+fi # test -n "$CONFIG_FILES"
 
+# Set up the scripts for CONFIG_HEADERS section.
+# No need to generate them if there are no CONFIG_HEADERS.
+# This happens for instance with `./config.status Makefile'.
+if test -n "$CONFIG_HEADERS"; then
+cat >"$tmp/defines.awk" <<\_ACAWK ||
+BEGIN {
 _ACEOF
 
-  cat >>$CONFIG_STATUS <<\_ACEOF
-  # Split the substitutions into bite-sized pieces for seds with
-  # small command number limits, like on Digital OSF/1 and HP-UX.
-  ac_max_sed_lines=48
-  ac_sed_frag=1 # Number of current file.
-  ac_beg=1 # First line for current file.
-  ac_end=$ac_max_sed_lines # Line after last line for current file.
-  ac_more_lines=:
-  ac_sed_cmds=
-  while $ac_more_lines; do
-    if test $ac_beg -gt 1; then
-      sed "1,${ac_beg}d; ${ac_end}q" $tmp/subs.sed >$tmp/subs.frag
-    else
-      sed "${ac_end}q" $tmp/subs.sed >$tmp/subs.frag
-    fi
-    if test ! -s $tmp/subs.frag; then
-      ac_more_lines=false
-    else
-      # The purpose of the label and of the branching condition is to
-      # speed up the sed processing (if there are no `@' at all, there
-      # is no need to browse any of the substitutions).
-      # These are the two extra sed commands mentioned above.
-      (echo ':t
-  /@[a-zA-Z_][a-zA-Z_0-9]*@/!b' && cat $tmp/subs.frag) >$tmp/subs-$ac_sed_frag.sed
-      if test -z "$ac_sed_cmds"; then
-	ac_sed_cmds="sed -f $tmp/subs-$ac_sed_frag.sed"
-      else
-	ac_sed_cmds="$ac_sed_cmds | sed -f $tmp/subs-$ac_sed_frag.sed"
-      fi
-      ac_sed_frag=`expr $ac_sed_frag + 1`
-      ac_beg=$ac_end
-      ac_end=`expr $ac_end + $ac_max_sed_lines`
-    fi
-  done
-  if test -z "$ac_sed_cmds"; then
-    ac_sed_cmds=cat
+# Transform confdefs.h into an awk script `defines.awk', embedded as
+# here-document in config.status, that substitutes the proper values into
+# config.h.in to produce config.h.
+
+# Create a delimiter string that does not exist in confdefs.h, to ease
+# handling of long lines.
+ac_delim='%!_!# '
+for ac_last_try in false false :; do
+  ac_t=`sed -n "/$ac_delim/p" confdefs.h`
+  if test -z "$ac_t"; then
+    break
+  elif $ac_last_try; then
+    as_fn_error "could not make $CONFIG_HEADERS" "$LINENO" 5
+  else
+    ac_delim="$ac_delim!$ac_delim _$ac_delim!! "
   fi
-fi # test -n "$CONFIG_FILES"
+done
 
+# For the awk script, D is an array of macro values keyed by name,
+# likewise P contains macro parameters if any.  Preserve backslash
+# newline sequences.
+
+ac_word_re=[_$as_cr_Letters][_$as_cr_alnum]*
+sed -n '
+s/.\{148\}/&'"$ac_delim"'/g
+t rset
+:rset
+s/^[	 ]*#[	 ]*define[	 ][	 ]*/ /
+t def
+d
+:def
+s/\\$//
+t bsnl
+s/["\\]/\\&/g
+s/^ \('"$ac_word_re"'\)\(([^()]*)\)[	 ]*\(.*\)/P["\1"]="\2"\
+D["\1"]=" \3"/p
+s/^ \('"$ac_word_re"'\)[	 ]*\(.*\)/D["\1"]=" \2"/p
+d
+:bsnl
+s/["\\]/\\&/g
+s/^ \('"$ac_word_re"'\)\(([^()]*)\)[	 ]*\(.*\)/P["\1"]="\2"\
+D["\1"]=" \3\\\\\\n"\\/p
+t cont
+s/^ \('"$ac_word_re"'\)[	 ]*\(.*\)/D["\1"]=" \2\\\\\\n"\\/p
+t cont
+d
+:cont
+n
+s/.\{148\}/&'"$ac_delim"'/g
+t clear
+:clear
+s/\\$//
+t bsnlc
+s/["\\]/\\&/g; s/^/"/; s/$/"/p
+d
+:bsnlc
+s/["\\]/\\&/g; s/^/"/; s/$/\\\\\\n"\\/p
+b cont
+' <confdefs.h | sed '
+s/'"$ac_delim"'/"\\\
+"/g' >>$CONFIG_STATUS || ac_write_fail=1
+
+cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1
+  for (key in D) D_is_set[key] = 1
+  FS = ""
+}
+/^[\t ]*#[\t ]*(define|undef)[\t ]+$ac_word_re([\t (]|\$)/ {
+  line = \$ 0
+  split(line, arg, " ")
+  if (arg[1] == "#") {
+    defundef = arg[2]
+    mac1 = arg[3]
+  } else {
+    defundef = substr(arg[1], 2)
+    mac1 = arg[2]
+  }
+  split(mac1, mac2, "(") #)
+  macro = mac2[1]
+  prefix = substr(line, 1, index(line, defundef) - 1)
+  if (D_is_set[macro]) {
+    # Preserve the white space surrounding the "#".
+    print prefix "define", macro P[macro] D[macro]
+    next
+  } else {
+    # Replace #undef with comments.  This is necessary, for example,
+    # in the case of _POSIX_SOURCE, which is predefined and required
+    # on some systems where configure will not decide to define it.
+    if (defundef == "undef") {
+      print "/*", prefix defundef, macro, "*/"
+      next
+    }
+  }
+}
+{ print }
+_ACAWK
 _ACEOF
-cat >>$CONFIG_STATUS <<\_ACEOF
-for ac_file in : $CONFIG_FILES; do test "x$ac_file" = x: && continue
-  # Support "outfile[:infile[:infile...]]", defaulting infile="outfile.in".
-  case $ac_file in
-  - | *:- | *:-:* ) # input from stdin
-	cat >$tmp/stdin
-	ac_file_in=`echo "$ac_file" | sed 's,[^:]*:,,'`
-	ac_file=`echo "$ac_file" | sed 's,:.*,,'` ;;
-  *:* ) ac_file_in=`echo "$ac_file" | sed 's,[^:]*:,,'`
-	ac_file=`echo "$ac_file" | sed 's,:.*,,'` ;;
-  * )   ac_file_in=$ac_file.in ;;
+cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1
+  as_fn_error "could not setup config headers machinery" "$LINENO" 5
+fi # test -n "$CONFIG_HEADERS"
+
+
+eval set X "  :F $CONFIG_FILES  :H $CONFIG_HEADERS    :C $CONFIG_COMMANDS"
+shift
+for ac_tag
+do
+  case $ac_tag in
+  :[FHLC]) ac_mode=$ac_tag; continue;;
+  esac
+  case $ac_mode$ac_tag in
+  :[FHL]*:*);;
+  :L* | :C*:*) as_fn_error "invalid tag \`$ac_tag'" "$LINENO" 5;;
+  :[FH]-) ac_tag=-:-;;
+  :[FH]*) ac_tag=$ac_tag:$ac_tag.in;;
+  esac
+  ac_save_IFS=$IFS
+  IFS=:
+  set x $ac_tag
+  IFS=$ac_save_IFS
+  shift
+  ac_file=$1
+  shift
+
+  case $ac_mode in
+  :L) ac_source=$1;;
+  :[FH])
+    ac_file_inputs=
+    for ac_f
+    do
+      case $ac_f in
+      -) ac_f="$tmp/stdin";;
+      *) # Look for the file first in the build tree, then in the source tree
+	 # (if the path is not absolute).  The absolute path cannot be DOS-style,
+	 # because $ac_f cannot contain `:'.
+	 test -f "$ac_f" ||
+	   case $ac_f in
+	   [\\/$]*) false;;
+	   *) test -f "$srcdir/$ac_f" && ac_f="$srcdir/$ac_f";;
+	   esac ||
+	   as_fn_error "cannot find input file: \`$ac_f'" "$LINENO" 5;;
+      esac
+      case $ac_f in *\'*) ac_f=`$as_echo "$ac_f" | sed "s/'/'\\\\\\\\''/g"`;; esac
+      as_fn_append ac_file_inputs " '$ac_f'"
+    done
+
+    # Let's still pretend it is `configure' which instantiates (i.e., don't
+    # use $as_me), people would be surprised to read:
+    #    /* config.h.  Generated by config.status.  */
+    configure_input='Generated from '`
+	  $as_echo "$*" | sed 's|^[^:]*/||;s|:[^:]*/|, |g'
+	`' by configure.'
+    if test x"$ac_file" != x-; then
+      configure_input="$ac_file.  $configure_input"
+      { $as_echo "$as_me:${as_lineno-$LINENO}: creating $ac_file" >&5
+$as_echo "$as_me: creating $ac_file" >&6;}
+    fi
+    # Neutralize special characters interpreted by sed in replacement strings.
+    case $configure_input in #(
+    *\&* | *\|* | *\\* )
+       ac_sed_conf_input=`$as_echo "$configure_input" |
+       sed 's/[\\\\&|]/\\\\&/g'`;; #(
+    *) ac_sed_conf_input=$configure_input;;
+    esac
+
+    case $ac_tag in
+    *:-:* | *:-) cat >"$tmp/stdin" \
+      || as_fn_error "could not create $ac_file" "$LINENO" 5 ;;
+    esac
+    ;;
   esac
 
-  # Compute @srcdir@, @top_srcdir@, and @INSTALL@ for subdirectories.
-  ac_dir=`(dirname "$ac_file") 2>/dev/null ||
+  ac_dir=`$as_dirname -- "$ac_file" ||
 $as_expr X"$ac_file" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
 	 X"$ac_file" : 'X\(//\)[^/]' \| \
 	 X"$ac_file" : 'X\(//\)$' \| \
-	 X"$ac_file" : 'X\(/\)' \| \
-	 .     : '\(.\)' 2>/dev/null ||
-echo X"$ac_file" |
-    sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/; q; }
-  	  /^X\(\/\/\)[^/].*/{ s//\1/; q; }
-  	  /^X\(\/\/\)$/{ s//\1/; q; }
-  	  /^X\(\/\).*/{ s//\1/; q; }
-  	  s/.*/./; q'`
-  { if $as_mkdir_p; then
-    mkdir -p "$ac_dir"
-  else
-    as_dir="$ac_dir"
-    as_dirs=
-    while test ! -d "$as_dir"; do
-      as_dirs="$as_dir $as_dirs"
-      as_dir=`(dirname "$as_dir") 2>/dev/null ||
-$as_expr X"$as_dir" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
-	 X"$as_dir" : 'X\(//\)[^/]' \| \
-	 X"$as_dir" : 'X\(//\)$' \| \
-	 X"$as_dir" : 'X\(/\)' \| \
-	 .     : '\(.\)' 2>/dev/null ||
-echo X"$as_dir" |
-    sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/; q; }
-  	  /^X\(\/\/\)[^/].*/{ s//\1/; q; }
-  	  /^X\(\/\/\)$/{ s//\1/; q; }
-  	  /^X\(\/\).*/{ s//\1/; q; }
-  	  s/.*/./; q'`
-    done
-    test ! -n "$as_dirs" || mkdir $as_dirs
-  fi || { { echo "$as_me:$LINENO: error: cannot create directory \"$ac_dir\"" >&5
-echo "$as_me: error: cannot create directory \"$ac_dir\"" >&2;}
-   { (exit 1); exit 1; }; }; }
-
+	 X"$ac_file" : 'X\(/\)' \| . 2>/dev/null ||
+$as_echo X"$ac_file" |
+    sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{
+	    s//\1/
+	    q
+	  }
+	  /^X\(\/\/\)[^/].*/{
+	    s//\1/
+	    q
+	  }
+	  /^X\(\/\/\)$/{
+	    s//\1/
+	    q
+	  }
+	  /^X\(\/\).*/{
+	    s//\1/
+	    q
+	  }
+	  s/.*/./; q'`
+  as_dir="$ac_dir"; as_fn_mkdir_p
   ac_builddir=.
 
-if test "$ac_dir" != .; then
-  ac_dir_suffix=/`echo "$ac_dir" | sed 's,^\.[\\/],,'`
-  # A "../" for each directory in $ac_dir_suffix.
-  ac_top_builddir=`echo "$ac_dir_suffix" | sed 's,/[^\\/]*,../,g'`
-else
-  ac_dir_suffix= ac_top_builddir=
-fi
+case "$ac_dir" in
+.) ac_dir_suffix= ac_top_builddir_sub=. ac_top_build_prefix= ;;
+*)
+  ac_dir_suffix=/`$as_echo "$ac_dir" | sed 's|^\.[\\/]||'`
+  # A ".." for each directory in $ac_dir_suffix.
+  ac_top_builddir_sub=`$as_echo "$ac_dir_suffix" | sed 's|/[^\\/]*|/..|g;s|/||'`
+  case $ac_top_builddir_sub in
+  "") ac_top_builddir_sub=. ac_top_build_prefix= ;;
+  *)  ac_top_build_prefix=$ac_top_builddir_sub/ ;;
+  esac ;;
+esac
+ac_abs_top_builddir=$ac_pwd
+ac_abs_builddir=$ac_pwd$ac_dir_suffix
+# for backward compatibility:
+ac_top_builddir=$ac_top_build_prefix
 
 case $srcdir in
-  .)  # No --srcdir option.  We are building in place.
+  .)  # We are building in place.
     ac_srcdir=.
-    if test -z "$ac_top_builddir"; then
-       ac_top_srcdir=.
-    else
-       ac_top_srcdir=`echo $ac_top_builddir | sed 's,/$,,'`
-    fi ;;
-  [\\/]* | ?:[\\/]* )  # Absolute path.
+    ac_top_srcdir=$ac_top_builddir_sub
+    ac_abs_top_srcdir=$ac_pwd ;;
+  [\\/]* | ?:[\\/]* )  # Absolute name.
     ac_srcdir=$srcdir$ac_dir_suffix;
-    ac_top_srcdir=$srcdir ;;
-  *) # Relative path.
-    ac_srcdir=$ac_top_builddir$srcdir$ac_dir_suffix
-    ac_top_srcdir=$ac_top_builddir$srcdir ;;
+    ac_top_srcdir=$srcdir
+    ac_abs_top_srcdir=$srcdir ;;
+  *) # Relative name.
+    ac_srcdir=$ac_top_build_prefix$srcdir$ac_dir_suffix
+    ac_top_srcdir=$ac_top_build_prefix$srcdir
+    ac_abs_top_srcdir=$ac_pwd/$srcdir ;;
 esac
+ac_abs_srcdir=$ac_abs_top_srcdir$ac_dir_suffix
 
-# Do not use `cd foo && pwd` to compute absolute paths, because
-# the directories may not exist.
-case `pwd` in
-.) ac_abs_builddir="$ac_dir";;
-*)
-  case "$ac_dir" in
-  .) ac_abs_builddir=`pwd`;;
-  [\\/]* | ?:[\\/]* ) ac_abs_builddir="$ac_dir";;
-  *) ac_abs_builddir=`pwd`/"$ac_dir";;
-  esac;;
-esac
-case $ac_abs_builddir in
-.) ac_abs_top_builddir=${ac_top_builddir}.;;
-*)
-  case ${ac_top_builddir}. in
-  .) ac_abs_top_builddir=$ac_abs_builddir;;
-  [\\/]* | ?:[\\/]* ) ac_abs_top_builddir=${ac_top_builddir}.;;
-  *) ac_abs_top_builddir=$ac_abs_builddir/${ac_top_builddir}.;;
-  esac;;
-esac
-case $ac_abs_builddir in
-.) ac_abs_srcdir=$ac_srcdir;;
-*)
-  case $ac_srcdir in
-  .) ac_abs_srcdir=$ac_abs_builddir;;
-  [\\/]* | ?:[\\/]* ) ac_abs_srcdir=$ac_srcdir;;
-  *) ac_abs_srcdir=$ac_abs_builddir/$ac_srcdir;;
-  esac;;
-esac
-case $ac_abs_builddir in
-.) ac_abs_top_srcdir=$ac_top_srcdir;;
-*)
-  case $ac_top_srcdir in
-  .) ac_abs_top_srcdir=$ac_abs_builddir;;
-  [\\/]* | ?:[\\/]* ) ac_abs_top_srcdir=$ac_top_srcdir;;
-  *) ac_abs_top_srcdir=$ac_abs_builddir/$ac_top_srcdir;;
-  esac;;
-esac
 
+  case $ac_mode in
+  :F)
+  #
+  # CONFIG_FILE
+  #
 
   case $INSTALL in
   [\\/$]* | ?:[\\/]* ) ac_INSTALL=$INSTALL ;;
-  *) ac_INSTALL=$ac_top_builddir$INSTALL ;;
+  *) ac_INSTALL=$ac_top_build_prefix$INSTALL ;;
   esac
+_ACEOF
 
-  if test x"$ac_file" != x-; then
-    { echo "$as_me:$LINENO: creating $ac_file" >&5
-echo "$as_me: creating $ac_file" >&6;}
-    rm -f "$ac_file"
-  fi
-  # Let's still pretend it is `configure' which instantiates (i.e., don't
-  # use $as_me), people would be surprised to read:
-  #    /* config.h.  Generated by config.status.  */
-  if test x"$ac_file" = x-; then
-    configure_input=
-  else
-    configure_input="$ac_file.  "
-  fi
-  configure_input=$configure_input"Generated from `echo $ac_file_in |
-				     sed 's,.*/,,'` by configure."
-
-  # First look for the input files in the build tree, otherwise in the
-  # src tree.
-  ac_file_inputs=`IFS=:
-    for f in $ac_file_in; do
-      case $f in
-      -) echo $tmp/stdin ;;
-      [\\/$]*)
-	 # Absolute (can't be DOS-style, as IFS=:)
-	 test -f "$f" || { { echo "$as_me:$LINENO: error: cannot find input file: $f" >&5
-echo "$as_me: error: cannot find input file: $f" >&2;}
-   { (exit 1); exit 1; }; }
-	 echo "$f";;
-      *) # Relative
-	 if test -f "$f"; then
-	   # Build tree
-	   echo "$f"
-	 elif test -f "$srcdir/$f"; then
-	   # Source tree
-	   echo "$srcdir/$f"
-	 else
-	   # /dev/null tree
-	   { { echo "$as_me:$LINENO: error: cannot find input file: $f" >&5
-echo "$as_me: error: cannot find input file: $f" >&2;}
-   { (exit 1); exit 1; }; }
-	 fi;;
-      esac
-    done` || { (exit 1); exit 1; }
+cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1
+# If the template does not know about datarootdir, expand it.
+# FIXME: This hack should be removed a few years after 2.60.
+ac_datarootdir_hack=; ac_datarootdir_seen=
+ac_sed_dataroot='
+/datarootdir/ {
+  p
+  q
+}
+/@datadir@/p
+/@docdir@/p
+/@infodir@/p
+/@localedir@/p
+/@mandir@/p'
+case `eval "sed -n \"\$ac_sed_dataroot\" $ac_file_inputs"` in
+*datarootdir*) ac_datarootdir_seen=yes;;
+*@datadir@*|*@docdir@*|*@infodir@*|*@localedir@*|*@mandir@*)
+  { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $ac_file_inputs seems to ignore the --datarootdir setting" >&5
+$as_echo "$as_me: WARNING: $ac_file_inputs seems to ignore the --datarootdir setting" >&2;}
+_ACEOF
+cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1
+  ac_datarootdir_hack='
+  s&@datadir@&$datadir&g
+  s&@docdir@&$docdir&g
+  s&@infodir@&$infodir&g
+  s&@localedir@&$localedir&g
+  s&@mandir@&$mandir&g
+  s&\\\${datarootdir}&$datarootdir&g' ;;
+esac
 _ACEOF
-cat >>$CONFIG_STATUS <<_ACEOF
-  sed "$ac_vpsub
+
+# Neutralize VPATH when `$srcdir' = `.'.
+# Shell code in configure.ac might set extrasub.
+# FIXME: do we really want to maintain this feature?
+cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1
+ac_sed_extra="$ac_vpsub
 $extrasub
 _ACEOF
-cat >>$CONFIG_STATUS <<\_ACEOF
+cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1
 :t
 /@[a-zA-Z_][a-zA-Z_0-9]*@/!b
-s,@configure_input@,$configure_input,;t t
-s,@srcdir@,$ac_srcdir,;t t
-s,@abs_srcdir@,$ac_abs_srcdir,;t t
-s,@top_srcdir@,$ac_top_srcdir,;t t
-s,@abs_top_srcdir@,$ac_abs_top_srcdir,;t t
-s,@builddir@,$ac_builddir,;t t
-s,@abs_builddir@,$ac_abs_builddir,;t t
-s,@top_builddir@,$ac_top_builddir,;t t
-s,@abs_top_builddir@,$ac_abs_top_builddir,;t t
-s,@INSTALL@,$ac_INSTALL,;t t
-" $ac_file_inputs | (eval "$ac_sed_cmds") >$tmp/out
-  rm -f $tmp/stdin
-  if test x"$ac_file" != x-; then
-    mv $tmp/out $ac_file
-  else
-    cat $tmp/out
-    rm -f $tmp/out
-  fi
-
-done
-_ACEOF
-cat >>$CONFIG_STATUS <<\_ACEOF
-
-#
-# CONFIG_HEADER section.
-#
-
-# These sed commands are passed to sed as "A NAME B NAME C VALUE D", where
-# NAME is the cpp macro being defined and VALUE is the value it is being given.
-#
-# ac_d sets the value in "#define NAME VALUE" lines.
-ac_dA='s,^\([	 ]*\)#\([	 ]*define[	 ][	 ]*\)'
-ac_dB='[	 ].*$,\1#\2'
-ac_dC=' '
-ac_dD=',;t'
-# ac_u turns "#undef NAME" without trailing blanks into "#define NAME VALUE".
-ac_uA='s,^\([	 ]*\)#\([	 ]*\)undef\([	 ][	 ]*\)'
-ac_uB='$,\1#\2define\3'
-ac_uC=' '
-ac_uD=',;t'
-
-for ac_file in : $CONFIG_HEADERS; do test "x$ac_file" = x: && continue
-  # Support "outfile[:infile[:infile...]]", defaulting infile="outfile.in".
+s|@configure_input@|$ac_sed_conf_input|;t t
+s&@top_builddir@&$ac_top_builddir_sub&;t t
+s&@top_build_prefix@&$ac_top_build_prefix&;t t
+s&@srcdir@&$ac_srcdir&;t t
+s&@abs_srcdir@&$ac_abs_srcdir&;t t
+s&@top_srcdir@&$ac_top_srcdir&;t t
+s&@abs_top_srcdir@&$ac_abs_top_srcdir&;t t
+s&@builddir@&$ac_builddir&;t t
+s&@abs_builddir@&$ac_abs_builddir&;t t
+s&@abs_top_builddir@&$ac_abs_top_builddir&;t t
+s&@INSTALL@&$ac_INSTALL&;t t
+$ac_datarootdir_hack
+"
+eval sed \"\$ac_sed_extra\" "$ac_file_inputs" | $AWK -f "$tmp/subs.awk" >$tmp/out \
+  || as_fn_error "could not create $ac_file" "$LINENO" 5
+
+test -z "$ac_datarootdir_hack$ac_datarootdir_seen" &&
+  { ac_out=`sed -n '/\${datarootdir}/p' "$tmp/out"`; test -n "$ac_out"; } &&
+  { ac_out=`sed -n '/^[	 ]*datarootdir[	 ]*:*=/p' "$tmp/out"`; test -z "$ac_out"; } &&
+  { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $ac_file contains a reference to the variable \`datarootdir'
+which seems to be undefined.  Please make sure it is defined." >&5
+$as_echo "$as_me: WARNING: $ac_file contains a reference to the variable \`datarootdir'
+which seems to be undefined.  Please make sure it is defined." >&2;}
+
+  rm -f "$tmp/stdin"
   case $ac_file in
-  - | *:- | *:-:* ) # input from stdin
-	cat >$tmp/stdin
-	ac_file_in=`echo "$ac_file" | sed 's,[^:]*:,,'`
-	ac_file=`echo "$ac_file" | sed 's,:.*,,'` ;;
-  *:* ) ac_file_in=`echo "$ac_file" | sed 's,[^:]*:,,'`
-	ac_file=`echo "$ac_file" | sed 's,:.*,,'` ;;
-  * )   ac_file_in=$ac_file.in ;;
-  esac
-
-  test x"$ac_file" != x- && { echo "$as_me:$LINENO: creating $ac_file" >&5
-echo "$as_me: creating $ac_file" >&6;}
-
-  # First look for the input files in the build tree, otherwise in the
-  # src tree.
-  ac_file_inputs=`IFS=:
-    for f in $ac_file_in; do
-      case $f in
-      -) echo $tmp/stdin ;;
-      [\\/$]*)
-	 # Absolute (can't be DOS-style, as IFS=:)
-	 test -f "$f" || { { echo "$as_me:$LINENO: error: cannot find input file: $f" >&5
-echo "$as_me: error: cannot find input file: $f" >&2;}
-   { (exit 1); exit 1; }; }
-	 # Do quote $f, to prevent DOS paths from being IFS'd.
-	 echo "$f";;
-      *) # Relative
-	 if test -f "$f"; then
-	   # Build tree
-	   echo "$f"
-	 elif test -f "$srcdir/$f"; then
-	   # Source tree
-	   echo "$srcdir/$f"
-	 else
-	   # /dev/null tree
-	   { { echo "$as_me:$LINENO: error: cannot find input file: $f" >&5
-echo "$as_me: error: cannot find input file: $f" >&2;}
-   { (exit 1); exit 1; }; }
-	 fi;;
-      esac
-    done` || { (exit 1); exit 1; }
-  # Remove the trailing spaces.
-  sed 's/[	 ]*$//' $ac_file_inputs >$tmp/in
-
-_ACEOF
-
-# Transform confdefs.h into two sed scripts, `conftest.defines' and
-# `conftest.undefs', that substitutes the proper values into
-# config.h.in to produce config.h.  The first handles `#define'
-# templates, and the second `#undef' templates.
-# And first: Protect against being on the right side of a sed subst in
-# config.status.  Protect against being in an unquoted here document
-# in config.status.
-rm -f conftest.defines conftest.undefs
-# Using a here document instead of a string reduces the quoting nightmare.
-# Putting comments in sed scripts is not portable.
-#
-# `end' is used to avoid that the second main sed command (meant for
-# 0-ary CPP macros) applies to n-ary macro definitions.
-# See the Autoconf documentation for `clear'.
-cat >confdef2sed.sed <<\_ACEOF
-s/[\\&,]/\\&/g
-s,[\\$`],\\&,g
-t clear
-: clear
-s,^[	 ]*#[	 ]*define[	 ][	 ]*\([^	 (][^	 (]*\)\(([^)]*)\)[	 ]*\(.*\)$,${ac_dA}\1${ac_dB}\1\2${ac_dC}\3${ac_dD},gp
-t end
-s,^[	 ]*#[	 ]*define[	 ][	 ]*\([^	 ][^	 ]*\)[	 ]*\(.*\)$,${ac_dA}\1${ac_dB}\1${ac_dC}\2${ac_dD},gp
-: end
-_ACEOF
-# If some macros were called several times there might be several times
-# the same #defines, which is useless.  Nevertheless, we may not want to
-# sort them, since we want the *last* AC-DEFINE to be honored.
-uniq confdefs.h | sed -n -f confdef2sed.sed >conftest.defines
-sed 's/ac_d/ac_u/g' conftest.defines >conftest.undefs
-rm -f confdef2sed.sed
-
-# This sed command replaces #undef with comments.  This is necessary, for
-# example, in the case of _POSIX_SOURCE, which is predefined and required
-# on some systems where configure will not decide to define it.
-cat >>conftest.undefs <<\_ACEOF
-s,^[	 ]*#[	 ]*undef[	 ][	 ]*[a-zA-Z_][a-zA-Z_0-9]*,/* & */,
-_ACEOF
-
-# Break up conftest.defines because some shells have a limit on the size
-# of here documents, and old seds have small limits too (100 cmds).
-echo '  # Handle all the #define templates only if necessary.' >>$CONFIG_STATUS
-echo '  if grep "^[	 ]*#[	 ]*define" $tmp/in >/dev/null; then' >>$CONFIG_STATUS
-echo '  # If there are no defines, we may have an empty if/fi' >>$CONFIG_STATUS
-echo '  :' >>$CONFIG_STATUS
-rm -f conftest.tail
-while grep . conftest.defines >/dev/null
-do
-  # Write a limited-size here document to $tmp/defines.sed.
-  echo '  cat >$tmp/defines.sed <<CEOF' >>$CONFIG_STATUS
-  # Speed up: don't consider the non `#define' lines.
-  echo '/^[	 ]*#[	 ]*define/!b' >>$CONFIG_STATUS
-  # Work around the forget-to-reset-the-flag bug.
-  echo 't clr' >>$CONFIG_STATUS
-  echo ': clr' >>$CONFIG_STATUS
-  sed ${ac_max_here_lines}q conftest.defines >>$CONFIG_STATUS
-  echo 'CEOF
-  sed -f $tmp/defines.sed $tmp/in >$tmp/out
-  rm -f $tmp/in
-  mv $tmp/out $tmp/in
-' >>$CONFIG_STATUS
-  sed 1,${ac_max_here_lines}d conftest.defines >conftest.tail
-  rm -f conftest.defines
-  mv conftest.tail conftest.defines
-done
-rm -f conftest.defines
-echo '  fi # grep' >>$CONFIG_STATUS
-echo >>$CONFIG_STATUS
-
-# Break up conftest.undefs because some shells have a limit on the size
-# of here documents, and old seds have small limits too (100 cmds).
-echo '  # Handle all the #undef templates' >>$CONFIG_STATUS
-rm -f conftest.tail
-while grep . conftest.undefs >/dev/null
-do
-  # Write a limited-size here document to $tmp/undefs.sed.
-  echo '  cat >$tmp/undefs.sed <<CEOF' >>$CONFIG_STATUS
-  # Speed up: don't consider the non `#undef'
-  echo '/^[	 ]*#[	 ]*undef/!b' >>$CONFIG_STATUS
-  # Work around the forget-to-reset-the-flag bug.
-  echo 't clr' >>$CONFIG_STATUS
-  echo ': clr' >>$CONFIG_STATUS
-  sed ${ac_max_here_lines}q conftest.undefs >>$CONFIG_STATUS
-  echo 'CEOF
-  sed -f $tmp/undefs.sed $tmp/in >$tmp/out
-  rm -f $tmp/in
-  mv $tmp/out $tmp/in
-' >>$CONFIG_STATUS
-  sed 1,${ac_max_here_lines}d conftest.undefs >conftest.tail
-  rm -f conftest.undefs
-  mv conftest.tail conftest.undefs
-done
-rm -f conftest.undefs
-
-cat >>$CONFIG_STATUS <<\_ACEOF
-  # Let's still pretend it is `configure' which instantiates (i.e., don't
-  # use $as_me), people would be surprised to read:
-  #    /* config.h.  Generated by config.status.  */
-  if test x"$ac_file" = x-; then
-    echo "/* Generated by configure.  */" >$tmp/config.h
-  else
-    echo "/* $ac_file.  Generated by configure.  */" >$tmp/config.h
-  fi
-  cat $tmp/in >>$tmp/config.h
-  rm -f $tmp/in
+  -) cat "$tmp/out" && rm -f "$tmp/out";;
+  *) rm -f "$ac_file" && mv "$tmp/out" "$ac_file";;
+  esac \
+  || as_fn_error "could not create $ac_file" "$LINENO" 5
+ ;;
+  :H)
+  #
+  # CONFIG_HEADER
+  #
   if test x"$ac_file" != x-; then
-    if diff $ac_file $tmp/config.h >/dev/null 2>&1; then
-      { echo "$as_me:$LINENO: $ac_file is unchanged" >&5
-echo "$as_me: $ac_file is unchanged" >&6;}
+    {
+      $as_echo "/* $configure_input  */" \
+      && eval '$AWK -f "$tmp/defines.awk"' "$ac_file_inputs"
+    } >"$tmp/config.h" \
+      || as_fn_error "could not create $ac_file" "$LINENO" 5
+    if diff "$ac_file" "$tmp/config.h" >/dev/null 2>&1; then
+      { $as_echo "$as_me:${as_lineno-$LINENO}: $ac_file is unchanged" >&5
+$as_echo "$as_me: $ac_file is unchanged" >&6;}
     else
-      ac_dir=`(dirname "$ac_file") 2>/dev/null ||
-$as_expr X"$ac_file" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
-	 X"$ac_file" : 'X\(//\)[^/]' \| \
-	 X"$ac_file" : 'X\(//\)$' \| \
-	 X"$ac_file" : 'X\(/\)' \| \
-	 .     : '\(.\)' 2>/dev/null ||
-echo X"$ac_file" |
-    sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/; q; }
-  	  /^X\(\/\/\)[^/].*/{ s//\1/; q; }
-  	  /^X\(\/\/\)$/{ s//\1/; q; }
-  	  /^X\(\/\).*/{ s//\1/; q; }
-  	  s/.*/./; q'`
-      { if $as_mkdir_p; then
-    mkdir -p "$ac_dir"
-  else
-    as_dir="$ac_dir"
-    as_dirs=
-    while test ! -d "$as_dir"; do
-      as_dirs="$as_dir $as_dirs"
-      as_dir=`(dirname "$as_dir") 2>/dev/null ||
-$as_expr X"$as_dir" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
-	 X"$as_dir" : 'X\(//\)[^/]' \| \
-	 X"$as_dir" : 'X\(//\)$' \| \
-	 X"$as_dir" : 'X\(/\)' \| \
-	 .     : '\(.\)' 2>/dev/null ||
-echo X"$as_dir" |
-    sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/; q; }
-  	  /^X\(\/\/\)[^/].*/{ s//\1/; q; }
-  	  /^X\(\/\/\)$/{ s//\1/; q; }
-  	  /^X\(\/\).*/{ s//\1/; q; }
-  	  s/.*/./; q'`
-    done
-    test ! -n "$as_dirs" || mkdir $as_dirs
-  fi || { { echo "$as_me:$LINENO: error: cannot create directory \"$ac_dir\"" >&5
-echo "$as_me: error: cannot create directory \"$ac_dir\"" >&2;}
-   { (exit 1); exit 1; }; }; }
-
-      rm -f $ac_file
-      mv $tmp/config.h $ac_file
+      rm -f "$ac_file"
+      mv "$tmp/config.h" "$ac_file" \
+	|| as_fn_error "could not create $ac_file" "$LINENO" 5
     fi
   else
-    cat $tmp/config.h
-    rm -f $tmp/config.h
+    $as_echo "/* $configure_input  */" \
+      && eval '$AWK -f "$tmp/defines.awk"' "$ac_file_inputs" \
+      || as_fn_error "could not create -" "$LINENO" 5
   fi
-done
-_ACEOF
-cat >>$CONFIG_STATUS <<\_ACEOF
-
-#
-# CONFIG_COMMANDS section.
-#
-for ac_file in : $CONFIG_COMMANDS; do test "x$ac_file" = x: && continue
-  ac_dest=`echo "$ac_file" | sed 's,:.*,,'`
-  ac_source=`echo "$ac_file" | sed 's,[^:]*:,,'`
-  ac_dir=`(dirname "$ac_dest") 2>/dev/null ||
-$as_expr X"$ac_dest" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
-	 X"$ac_dest" : 'X\(//\)[^/]' \| \
-	 X"$ac_dest" : 'X\(//\)$' \| \
-	 X"$ac_dest" : 'X\(/\)' \| \
-	 .     : '\(.\)' 2>/dev/null ||
-echo X"$ac_dest" |
-    sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/; q; }
-  	  /^X\(\/\/\)[^/].*/{ s//\1/; q; }
-  	  /^X\(\/\/\)$/{ s//\1/; q; }
-  	  /^X\(\/\).*/{ s//\1/; q; }
-  	  s/.*/./; q'`
-  { if $as_mkdir_p; then
-    mkdir -p "$ac_dir"
-  else
-    as_dir="$ac_dir"
-    as_dirs=
-    while test ! -d "$as_dir"; do
-      as_dirs="$as_dir $as_dirs"
-      as_dir=`(dirname "$as_dir") 2>/dev/null ||
-$as_expr X"$as_dir" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
-	 X"$as_dir" : 'X\(//\)[^/]' \| \
-	 X"$as_dir" : 'X\(//\)$' \| \
-	 X"$as_dir" : 'X\(/\)' \| \
-	 .     : '\(.\)' 2>/dev/null ||
-echo X"$as_dir" |
-    sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/; q; }
-  	  /^X\(\/\/\)[^/].*/{ s//\1/; q; }
-  	  /^X\(\/\/\)$/{ s//\1/; q; }
-  	  /^X\(\/\).*/{ s//\1/; q; }
-  	  s/.*/./; q'`
-    done
-    test ! -n "$as_dirs" || mkdir $as_dirs
-  fi || { { echo "$as_me:$LINENO: error: cannot create directory \"$ac_dir\"" >&5
-echo "$as_me: error: cannot create directory \"$ac_dir\"" >&2;}
-   { (exit 1); exit 1; }; }; }
-
-  ac_builddir=.
-
-if test "$ac_dir" != .; then
-  ac_dir_suffix=/`echo "$ac_dir" | sed 's,^\.[\\/],,'`
-  # A "../" for each directory in $ac_dir_suffix.
-  ac_top_builddir=`echo "$ac_dir_suffix" | sed 's,/[^\\/]*,../,g'`
-else
-  ac_dir_suffix= ac_top_builddir=
-fi
+ ;;
 
-case $srcdir in
-  .)  # No --srcdir option.  We are building in place.
-    ac_srcdir=.
-    if test -z "$ac_top_builddir"; then
-       ac_top_srcdir=.
-    else
-       ac_top_srcdir=`echo $ac_top_builddir | sed 's,/$,,'`
-    fi ;;
-  [\\/]* | ?:[\\/]* )  # Absolute path.
-    ac_srcdir=$srcdir$ac_dir_suffix;
-    ac_top_srcdir=$srcdir ;;
-  *) # Relative path.
-    ac_srcdir=$ac_top_builddir$srcdir$ac_dir_suffix
-    ac_top_srcdir=$ac_top_builddir$srcdir ;;
-esac
+  :C)  { $as_echo "$as_me:${as_lineno-$LINENO}: executing $ac_file commands" >&5
+$as_echo "$as_me: executing $ac_file commands" >&6;}
+ ;;
+  esac
 
-# Do not use `cd foo && pwd` to compute absolute paths, because
-# the directories may not exist.
-case `pwd` in
-.) ac_abs_builddir="$ac_dir";;
-*)
-  case "$ac_dir" in
-  .) ac_abs_builddir=`pwd`;;
-  [\\/]* | ?:[\\/]* ) ac_abs_builddir="$ac_dir";;
-  *) ac_abs_builddir=`pwd`/"$ac_dir";;
-  esac;;
-esac
-case $ac_abs_builddir in
-.) ac_abs_top_builddir=${ac_top_builddir}.;;
-*)
-  case ${ac_top_builddir}. in
-  .) ac_abs_top_builddir=$ac_abs_builddir;;
-  [\\/]* | ?:[\\/]* ) ac_abs_top_builddir=${ac_top_builddir}.;;
-  *) ac_abs_top_builddir=$ac_abs_builddir/${ac_top_builddir}.;;
-  esac;;
-esac
-case $ac_abs_builddir in
-.) ac_abs_srcdir=$ac_srcdir;;
-*)
-  case $ac_srcdir in
-  .) ac_abs_srcdir=$ac_abs_builddir;;
-  [\\/]* | ?:[\\/]* ) ac_abs_srcdir=$ac_srcdir;;
-  *) ac_abs_srcdir=$ac_abs_builddir/$ac_srcdir;;
-  esac;;
-esac
-case $ac_abs_builddir in
-.) ac_abs_top_srcdir=$ac_top_srcdir;;
-*)
-  case $ac_top_srcdir in
-  .) ac_abs_top_srcdir=$ac_abs_builddir;;
-  [\\/]* | ?:[\\/]* ) ac_abs_top_srcdir=$ac_top_srcdir;;
-  *) ac_abs_top_srcdir=$ac_abs_builddir/$ac_top_srcdir;;
-  esac;;
-esac
 
+  case $ac_file$ac_mode in
+    "default":C) case x$CONFIG_HEADERS in xconfig.h:config.in) echo > stamp-h ;; esac ;;
 
-  { echo "$as_me:$LINENO: executing $ac_dest commands" >&5
-echo "$as_me: executing $ac_dest commands" >&6;}
-  case $ac_dest in
-    default ) case x$CONFIG_HEADERS in xconfig.h:config.in) echo > stamp-h ;; esac ;;
   esac
-done
-_ACEOF
+done # for ac_tag
 
-cat >>$CONFIG_STATUS <<\_ACEOF
 
-{ (exit 0); exit 0; }
+as_fn_exit 0
 _ACEOF
-chmod +x $CONFIG_STATUS
 ac_clean_files=$ac_clean_files_save
 
+test $ac_write_fail = 0 ||
+  as_fn_error "write failure creating $CONFIG_STATUS" "$LINENO" 5
+
 
 # configure is writing to config.log, and then calls config.status.
 # config.status does its own redirection, appending to config.log.
@@ -8324,6 +7277,10 @@ if test "$no_create" != yes; then
   exec 5>>config.log
   # Use ||, not &&, to avoid exiting from the if with $? = 1, which
   # would make configure fail if this is the last instruction.
-  $ac_cs_success || { (exit 1); exit 1; }
+  $ac_cs_success || as_fn_exit $?
+fi
+if test -n "$ac_unrecognized_opts" && test "$enable_option_checking" != no; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: unrecognized options: $ac_unrecognized_opts" >&5
+$as_echo "$as_me: WARNING: unrecognized options: $ac_unrecognized_opts" >&2;}
 fi