Add ability to configure mn10300 built with common simulator code base.

Use --enable-sim-common to build this way; default configure has not
changed.

1 files changed, 526 insertions, 49 deletions

diff --git a/sim/mn10300/configure b/sim/mn10300/configure
index 4761036..578206b 100755
--- a/sim/mn10300/configure
+++ b/sim/mn10300/configure
@@ -75,8 +75,11 @@
 
 
 
+
+
+
 # Guess values for system-dependent variables and create Makefiles.
-# Generated automatically using autoconf version 2.12.1 
+# Generated automatically using autoconf version 2.12 
 # Copyright (C) 1992, 93, 94, 95, 96 Free Software Foundation, Inc.
 #
 # This configure script is free software; the Free Software Foundation
@@ -100,6 +103,20 @@ ac_help="$ac_help
   --enable-sim-trace=opts		Enable tracing flags"
 ac_help="$ac_help
   --enable-sim-profile=opts		Enable profiling flags"
+ac_help="$ac_help
+  --enable-sim-endian=endian		Specify target byte endian orientation."
+ac_help="$ac_help
+  --enable-sim-alignment=align		Specify strict,  nonstrict or forced alignment of memory accesses."
+ac_help="$ac_help
+  --enable-sim-hostendian=end		Specify host byte endian orientation."
+ac_help="$ac_help
+  --enable-sim-warnings=opts		Extra CFLAGS for turning on compiler warnings"
+ac_help="$ac_help
+  --enable-sim-reserved-bits		Specify whether to check reserved bits in instruction."
+ac_help="$ac_help
+  --enable-sim-bitsize=N		Specify target bitsize (32 or 64)."
+ac_help="$ac_help
+  --enable-sim-common			Enable common simulator"
 
 # Initialize some variables set by options.
 # The variables have the same names as the options, with
@@ -138,7 +155,6 @@ mandir='${prefix}/man'
 # Initialize some other variables.
 subdirs=
 MFLAGS= MAKEFLAGS=
-SHELL=${CONFIG_SHELL-/bin/sh}
 # Maximum number of lines to put in a shell here document.
 ac_max_here_lines=12
 
@@ -422,7 +438,7 @@ EOF
     verbose=yes ;;
 
   -version | --version | --versio | --versi | --vers)
-    echo "configure generated by autoconf version 2.12.1"
+    echo "configure generated by autoconf version 2.12"
     exit 0 ;;
 
   -with-* | --with-*)
@@ -610,7 +626,7 @@ fi
 
 
 echo $ac_n "checking how to run the C preprocessor""... $ac_c" 1>&6
-echo "configure:614: checking how to run the C preprocessor" >&5
+echo "configure:630: checking how to run the C preprocessor" >&5
 # On Suns, sometimes $CPP names a directory.
 if test -n "$CPP" && test -d "$CPP"; then
   CPP=
@@ -625,13 +641,13 @@ else
   # On the NeXT, cc -E runs the code through the compiler's parser,
   # not just through cpp.
   cat > conftest.$ac_ext <<EOF
-#line 629 "configure"
+#line 645 "configure"
 #include "confdefs.h"
 #include <assert.h>
 Syntax Error
 EOF
 ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:635: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:651: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
 ac_err=`grep -v '^ *+' conftest.out`
 if test -z "$ac_err"; then
   :
@@ -642,13 +658,13 @@ else
   rm -rf conftest*
   CPP="${CC-cc} -E -traditional-cpp"
   cat > conftest.$ac_ext <<EOF
-#line 646 "configure"
+#line 662 "configure"
 #include "confdefs.h"
 #include <assert.h>
 Syntax Error
 EOF
 ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:652: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:668: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
 ac_err=`grep -v '^ *+' conftest.out`
 if test -z "$ac_err"; then
   :
@@ -716,33 +732,33 @@ esac
 
 
 # Make sure we can run config.sub.
-if ${CONFIG_SHELL-/bin/sh} $ac_config_sub sun4 >/dev/null 2>&1; then :
+if $ac_config_sub sun4 >/dev/null 2>&1; then :
 else { echo "configure: error: can not run $ac_config_sub" 1>&2; exit 1; }
 fi
 
 echo $ac_n "checking host system type""... $ac_c" 1>&6
-echo "configure:725: checking host system type" >&5
+echo "configure:741: checking host system type" >&5
 
 host_alias=$host
 case "$host_alias" in
 NONE)
   case $nonopt in
   NONE)
-    if host_alias=`${CONFIG_SHELL-/bin/sh} $ac_config_guess`; then :
+    if host_alias=`$ac_config_guess`; then :
     else { echo "configure: error: can not guess host type; you must specify one" 1>&2; exit 1; }
     fi ;;
   *) host_alias=$nonopt ;;
   esac ;;
 esac
 
-host=`${CONFIG_SHELL-/bin/sh} $ac_config_sub $host_alias`
+host=`$ac_config_sub $host_alias`
 host_cpu=`echo $host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\1/'`
 host_vendor=`echo $host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\2/'`
 host_os=`echo $host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'`
 echo "$ac_t""$host" 1>&6
 
 echo $ac_n "checking target system type""... $ac_c" 1>&6
-echo "configure:746: checking target system type" >&5
+echo "configure:762: checking target system type" >&5
 
 target_alias=$target
 case "$target_alias" in
@@ -753,14 +769,14 @@ NONE)
   esac ;;
 esac
 
-target=`${CONFIG_SHELL-/bin/sh} $ac_config_sub $target_alias`
+target=`$ac_config_sub $target_alias`
 target_cpu=`echo $target | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\1/'`
 target_vendor=`echo $target | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\2/'`
 target_os=`echo $target | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'`
 echo "$ac_t""$target" 1>&6
 
 echo $ac_n "checking build system type""... $ac_c" 1>&6
-echo "configure:764: checking build system type" >&5
+echo "configure:780: checking build system type" >&5
 
 build_alias=$build
 case "$build_alias" in
@@ -771,7 +787,7 @@ NONE)
   esac ;;
 esac
 
-build=`${CONFIG_SHELL-/bin/sh} $ac_config_sub $build_alias`
+build=`$ac_config_sub $build_alias`
 build_cpu=`echo $build | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\1/'`
 build_vendor=`echo $build | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\2/'`
 build_os=`echo $build | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'`
@@ -804,7 +820,7 @@ test "$program_transform_name" = "" && program_transform_name="s,x,x,"
 # Extract the first word of "gcc", so it can be a program name with args.
 set dummy gcc; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:808: checking for $ac_word" >&5
+echo "configure:824: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -833,7 +849,7 @@ if test -z "$CC"; then
   # Extract the first word of "cc", so it can be a program name with args.
 set dummy cc; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:837: checking for $ac_word" >&5
+echo "configure:853: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -881,7 +897,7 @@ fi
 fi
 
 echo $ac_n "checking whether the C compiler ($CC $CFLAGS $LDFLAGS) works""... $ac_c" 1>&6
-echo "configure:885: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) works" >&5
+echo "configure:901: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) works" >&5
 
 ac_ext=c
 # CFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options.
@@ -891,11 +907,11 @@ ac_link='${CC-cc} -o conftest $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS
 cross_compiling=$ac_cv_prog_cc_cross
 
 cat > conftest.$ac_ext <<EOF
-#line 895 "configure"
+#line 911 "configure"
 #include "confdefs.h"
 main(){return(0);}
 EOF
-if { (eval echo configure:899: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then
+if { (eval echo configure:915: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then
   ac_cv_prog_cc_works=yes
   # If we can't run a trivial program, we are probably using a cross compiler.
   if (./conftest; exit) 2>/dev/null; then
@@ -915,12 +931,12 @@ if test $ac_cv_prog_cc_works = no; then
   { echo "configure: error: installation or configuration problem: C compiler cannot create executables." 1>&2; exit 1; }
 fi
 echo $ac_n "checking whether the C compiler ($CC $CFLAGS $LDFLAGS) is a cross-compiler""... $ac_c" 1>&6
-echo "configure:919: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) is a cross-compiler" >&5
+echo "configure:935: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) is a cross-compiler" >&5
 echo "$ac_t""$ac_cv_prog_cc_cross" 1>&6
 cross_compiling=$ac_cv_prog_cc_cross
 
 echo $ac_n "checking whether we are using GNU C""... $ac_c" 1>&6
-echo "configure:924: checking whether we are using GNU C" >&5
+echo "configure:940: checking whether we are using GNU C" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_gcc'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -929,7 +945,7 @@ else
   yes;
 #endif
 EOF
-if { ac_try='${CC-cc} -E conftest.c'; { (eval echo configure:933: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }; } | egrep yes >/dev/null 2>&1; then
+if { ac_try='${CC-cc} -E conftest.c'; { (eval echo configure:949: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }; } | egrep yes >/dev/null 2>&1; then
   ac_cv_prog_gcc=yes
 else
   ac_cv_prog_gcc=no
@@ -944,7 +960,7 @@ if test $ac_cv_prog_gcc = yes; then
   ac_save_CFLAGS="$CFLAGS"
   CFLAGS=
   echo $ac_n "checking whether ${CC-cc} accepts -g""... $ac_c" 1>&6
-echo "configure:948: checking whether ${CC-cc} accepts -g" >&5
+echo "configure:964: checking whether ${CC-cc} accepts -g" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_cc_g'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -978,12 +994,11 @@ fi
 # SunOS /usr/etc/install
 # IRIX /sbin/install
 # AIX /bin/install
-# AIX 4 /usr/bin/installbsd, which doesn't work without a -g flag
 # AFS /usr/afsws/bin/install, which mishandles nonexistent args
 # SVR4 /usr/ucb/install, which tries to use the nonexistent group "staff"
 # ./install, which can be erroneously created by make from ./install.sh.
 echo $ac_n "checking for a BSD compatible install""... $ac_c" 1>&6
-echo "configure:987: checking for a BSD compatible install" >&5
+echo "configure:1002: checking for a BSD compatible install" >&5
 if test -z "$INSTALL"; then
 if eval "test \"`echo '$''{'ac_cv_path_install'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
@@ -995,13 +1010,12 @@ else
     /|./|.//|/etc/*|/usr/sbin/*|/usr/etc/*|/sbin/*|/usr/afsws/bin/*|/usr/ucb/*) ;;
     *)
       # OSF1 and SCO ODT 3.0 have their own names for install.
-      # Don't use installbsd from OSF since it installs stuff as root
-      # by default.
-      for ac_prog in ginstall scoinst install; do
+      for ac_prog in ginstall installbsd scoinst install; do
         if test -f $ac_dir/$ac_prog; then
 	  if test $ac_prog = install &&
             grep dspmsg $ac_dir/$ac_prog >/dev/null 2>&1; then
 	    # AIX install.  It has an incompatible calling convention.
+	    # OSF/1 installbsd also uses dspmsg, but is usable.
 	    :
 	  else
 	    ac_cv_path_install="$ac_dir/$ac_prog -c"
@@ -1049,7 +1063,7 @@ AR=${AR-ar}
 # Extract the first word of "ranlib", so it can be a program name with args.
 set dummy ranlib; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1053: checking for $ac_word" >&5
+echo "configure:1067: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_RANLIB'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -1079,21 +1093,101 @@ fi
 # Check for common headers.
 # FIXME: Seems to me this can cause problems for i386-windows hosts.
 # At one point there were hardcoded AC_DEFINE's if ${host} = i386-*-windows*.
-for ac_hdr in stdlib.h string.h strings.h unistd.h time.h sys/time.h sys/resource.h
+for ac_hdr in stdlib.h string.h strings.h unistd.h time.h
+do
+ac_safe=`echo "$ac_hdr" | sed 'y%./+-%__p_%'`
+echo $ac_n "checking for $ac_hdr""... $ac_c" 1>&6
+echo "configure:1101: checking for $ac_hdr" >&5
+if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then
+  echo $ac_n "(cached) $ac_c" 1>&6
+else
+  cat > conftest.$ac_ext <<EOF
+#line 1106 "configure"
+#include "confdefs.h"
+#include <$ac_hdr>
+EOF
+ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
+{ (eval echo configure:1111: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+ac_err=`grep -v '^ *+' conftest.out`
+if test -z "$ac_err"; then
+  rm -rf conftest*
+  eval "ac_cv_header_$ac_safe=yes"
+else
+  echo "$ac_err" >&5
+  echo "configure: failed program was:" >&5
+  cat conftest.$ac_ext >&5
+  rm -rf conftest*
+  eval "ac_cv_header_$ac_safe=no"
+fi
+rm -f conftest*
+fi
+if eval "test \"`echo '$ac_cv_header_'$ac_safe`\" = yes"; then
+  echo "$ac_t""yes" 1>&6
+    ac_tr_hdr=HAVE_`echo $ac_hdr | sed 'y%abcdefghijklmnopqrstuvwxyz./-%ABCDEFGHIJKLMNOPQRSTUVWXYZ___%'`
+  cat >> confdefs.h <<EOF
+#define $ac_tr_hdr 1
+EOF
+ 
+else
+  echo "$ac_t""no" 1>&6
+fi
+done
+
+for ac_hdr in sys/time.h sys/resource.h
+do
+ac_safe=`echo "$ac_hdr" | sed 'y%./+-%__p_%'`
+echo $ac_n "checking for $ac_hdr""... $ac_c" 1>&6
+echo "configure:1141: checking for $ac_hdr" >&5
+if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then
+  echo $ac_n "(cached) $ac_c" 1>&6
+else
+  cat > conftest.$ac_ext <<EOF
+#line 1146 "configure"
+#include "confdefs.h"
+#include <$ac_hdr>
+EOF
+ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
+{ (eval echo configure:1151: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+ac_err=`grep -v '^ *+' conftest.out`
+if test -z "$ac_err"; then
+  rm -rf conftest*
+  eval "ac_cv_header_$ac_safe=yes"
+else
+  echo "$ac_err" >&5
+  echo "configure: failed program was:" >&5
+  cat conftest.$ac_ext >&5
+  rm -rf conftest*
+  eval "ac_cv_header_$ac_safe=no"
+fi
+rm -f conftest*
+fi
+if eval "test \"`echo '$ac_cv_header_'$ac_safe`\" = yes"; then
+  echo "$ac_t""yes" 1>&6
+    ac_tr_hdr=HAVE_`echo $ac_hdr | sed 'y%abcdefghijklmnopqrstuvwxyz./-%ABCDEFGHIJKLMNOPQRSTUVWXYZ___%'`
+  cat >> confdefs.h <<EOF
+#define $ac_tr_hdr 1
+EOF
+ 
+else
+  echo "$ac_t""no" 1>&6
+fi
+done
+
+for ac_hdr in fcntl.h
 do
 ac_safe=`echo "$ac_hdr" | sed 'y%./+-%__p_%'`
 echo $ac_n "checking for $ac_hdr""... $ac_c" 1>&6
-echo "configure:1087: checking for $ac_hdr" >&5
+echo "configure:1181: checking for $ac_hdr" >&5
 if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   cat > conftest.$ac_ext <<EOF
-#line 1092 "configure"
+#line 1186 "configure"
 #include "confdefs.h"
 #include <$ac_hdr>
 EOF
 ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:1097: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:1191: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
 ac_err=`grep -v '^ *+' conftest.out`
 if test -z "$ac_err"; then
   rm -rf conftest*
@@ -1122,12 +1216,12 @@ done
 for ac_func in getrusage time sigaction
 do
 echo $ac_n "checking for $ac_func""... $ac_c" 1>&6
-echo "configure:1126: checking for $ac_func" >&5
+echo "configure:1220: checking for $ac_func" >&5
 if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   cat > conftest.$ac_ext <<EOF
-#line 1131 "configure"
+#line 1225 "configure"
 #include "confdefs.h"
 /* System header to define __stub macros and hopefully few prototypes,
     which can conflict with char $ac_func(); below.  */
@@ -1150,7 +1244,7 @@ $ac_func();
 
 ; return 0; }
 EOF
-if { (eval echo configure:1154: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then
+if { (eval echo configure:1248: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then
   rm -rf conftest*
   eval "ac_cv_func_$ac_func=yes"
 else
@@ -1179,11 +1273,12 @@ done
 
 
 
+USE_MAINTAINER_MODE=no
 # Check whether --enable-maintainer-mode or --disable-maintainer-mode was given.
 if test "${enable_maintainer_mode+set}" = set; then
   enableval="$enable_maintainer_mode"
   case "${enableval}" in
-  yes)	MAINT="" ;;
+  yes)	MAINT="" USE_MAINTAINER_MODE=yes ;;
   no)	MAINT="#" ;;
   *)	{ echo "configure: error: "--enable-maintainer-mode does not take a value"" 1>&2; exit 1; }; MAINT="#" ;;
 esac
@@ -1322,12 +1417,12 @@ fi
 
 
 echo $ac_n "checking return type of signal handlers""... $ac_c" 1>&6
-echo "configure:1326: checking return type of signal handlers" >&5
+echo "configure:1421: checking return type of signal handlers" >&5
 if eval "test \"`echo '$''{'ac_cv_type_signal'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   cat > conftest.$ac_ext <<EOF
-#line 1331 "configure"
+#line 1426 "configure"
 #include "confdefs.h"
 #include <sys/types.h>
 #include <signal.h>
@@ -1344,7 +1439,7 @@ int main() {
 int i;
 ; return 0; }
 EOF
-if { (eval echo configure:1348: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:1443: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
   rm -rf conftest*
   ac_cv_type_signal=void
 else
@@ -1384,21 +1479,379 @@ sim_link_links="${sim_link_links} targ-vals.def"
 
 
 
-for ac_hdr in unistd.h
+
+wire_endian="LITTLE_ENDIAN"
+default_endian=""
+# Check whether --enable-sim-endian or --disable-sim-endian was given.
+if test "${enable_sim_endian+set}" = set; then
+  enableval="$enable_sim_endian"
+  case "${enableval}" in
+  b*|B*) sim_endian="-DWITH_TARGET_BYTE_ORDER=BIG_ENDIAN";;
+  l*|L*) sim_endian="-DWITH_TARGET_BYTE_ORDER=LITTLE_ENDIAN";;
+  yes)	 if test x"$wire_endian" != x; then
+	   sim_endian="-DWITH_TARGET_BYTE_ORDER=${wire_endian}"
+	 else
+           if test x"$default_endian" != x; then
+	     sim_endian="-DWITH_TARGET_BYTE_ORDER=${default_endian}"
+	   else
+	     echo "No hard-wired endian for target $target" 1>&6
+	     sim_endian="-DWITH_TARGET_BYTE_ORDER=0"
+	   fi
+	 fi;;
+  no)	 if test x"$default_endian" != x; then
+	   sim_endian="-DWITH_DEFAULT_TARGET_BYTE_ORDER=${default_endian}"
+	 else
+	   if test x"$wire_endian" != x; then
+	     sim_endian="-DWITH_DEFAULT_TARGET_BYTE_ORDER=${wire_endian}"
+	   else
+	     echo "No default endian for target $target" 1>&6
+	     sim_endian="-DWITH_DEFAULT_TARGET_BYTE_ORDER=0"
+	   fi
+	 fi;;
+  *)	 { echo "configure: error: "Unknown value $enableval for --enable-sim-endian"" 1>&2; exit 1; }; sim_endian="";;
+esac
+if test x"$silent" != x"yes" && test x"$sim_endian" != x""; then
+  echo "Setting endian flags = $sim_endian" 6>&1
+fi
+else
+  if test x"$default_endian" != x; then
+  sim_endian="-DWITH_DEFAULT_TARGET_BYTE_ORDER=${default_endian}"
+else
+  if test x"$wire_endian" != x; then
+    sim_endian="-DWITH_TARGET_BYTE_ORDER=${wire_endian}"
+  else
+    sim_endian=
+  fi
+fi
+fi
+
+wire_alignment="NONSTRICT_ALIGNMENT"
+default_alignment=""
+
+# Check whether --enable-sim-alignment or --disable-sim-alignment was given.
+if test "${enable_sim_alignment+set}" = set; then
+  enableval="$enable_sim_alignment"
+  case "${enableval}" in
+  strict | STRICT)       sim_alignment="-DWITH_ALIGNMENT=STRICT_ALIGNMENT";;
+  nonstrict | NONSTRICT) sim_alignment="-DWITH_ALIGNMENT=NONSTRICT_ALIGNMENT";;
+  forced | FORCED)       sim_alignment="-DWITH_ALIGNMENT=FORCED_ALIGNMENT";;
+  yes) if test x"$wire_alignment" != x; then
+	 sim_alignment="-DWITH_ALIGNMENT=${wire_alignment}"
+       else
+         if test x"$default_alignment" != x; then
+           sim_alignment="-DWITH_ALIGNMENT=${default_alignment}"
+         else
+	   echo "No hard-wired alignment for target $target" 1>&6
+	   sim_alignment="-DWITH_ALIGNMENT=0"
+         fi
+       fi;;
+  no)  if test x"$default_alignment" != x; then
+	 sim_alignment="-DWITH_DEFAULT_ALIGNMENT=${default_alignment}"
+       else
+         if test x"$wire_alignment" != x; then
+	   sim_alignment="-DWITH_DEFAULT_ALIGNMENT=${wire_alignment}"
+         else
+           echo "No default alignment for target $target" 1>&6
+           sim_alignment="-DWITH_DEFAULT_ALIGNMENT=0"
+         fi
+       fi;;
+  *)   { echo "configure: error: "Unknown value $enableval passed to --enable-sim-alignment"" 1>&2; exit 1; }; sim_alignment="";;
+esac
+if test x"$silent" != x"yes" && test x"$sim_alignment" != x""; then
+  echo "Setting alignment flags = $sim_alignment" 6>&1
+fi
+else
+  if test x"$default_alignment" != x; then
+  sim_alignment="-DWITH_DEFAULT_ALIGNMENT=${default_alignment}"
+else
+  if test x"$wire_alignment" != x; then
+    sim_alignment="-DWITH_ALIGNMENT=${wire_alignment}"
+  else
+    sim_alignment=
+  fi
+fi
+fi
+
+
+# Check whether --enable-sim-hostendian or --disable-sim-hostendian was given.
+if test "${enable_sim_hostendian+set}" = set; then
+  enableval="$enable_sim_hostendian"
+  case "${enableval}" in
+  no)	 sim_hostendian="-DWITH_HOST_BYTE_ORDER=0";;
+  b*|B*) sim_hostendian="-DWITH_HOST_BYTE_ORDER=BIG_ENDIAN";;
+  l*|L*) sim_hostendian="-DWITH_HOST_BYTE_ORDER=LITTLE_ENDIAN";;
+  *)	 { echo "configure: error: "Unknown value $enableval for --enable-sim-hostendian"" 1>&2; exit 1; }; sim_hostendian="";;
+esac
+if test x"$silent" != x"yes" && test x"$sim_hostendian" != x""; then
+  echo "Setting hostendian flags = $sim_hostendian" 6>&1
+fi
+else
+  
+if test "x$cross_compiling" = "xno"; then
+  echo $ac_n "checking whether byte ordering is bigendian""... $ac_c" 1>&6
+echo "configure:1593: checking whether byte ordering is bigendian" >&5
+if eval "test \"`echo '$''{'ac_cv_c_bigendian'+set}'`\" = set"; then
+  echo $ac_n "(cached) $ac_c" 1>&6
+else
+  ac_cv_c_bigendian=unknown
+# See if sys/param.h defines the BYTE_ORDER macro.
+cat > conftest.$ac_ext <<EOF
+#line 1600 "configure"
+#include "confdefs.h"
+#include <sys/types.h>
+#include <sys/param.h>
+int main() {
+
+#if !BYTE_ORDER || !BIG_ENDIAN || !LITTLE_ENDIAN
+ bogus endian macros
+#endif
+; return 0; }
+EOF
+if { (eval echo configure:1611: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+  rm -rf conftest*
+  # It does; now see whether it defined to BIG_ENDIAN or not.
+cat > conftest.$ac_ext <<EOF
+#line 1615 "configure"
+#include "confdefs.h"
+#include <sys/types.h>
+#include <sys/param.h>
+int main() {
+
+#if BYTE_ORDER != BIG_ENDIAN
+ not big endian
+#endif
+; return 0; }
+EOF
+if { (eval echo configure:1626: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+  rm -rf conftest*
+  ac_cv_c_bigendian=yes
+else
+  echo "configure: failed program was:" >&5
+  cat conftest.$ac_ext >&5
+  rm -rf conftest*
+  ac_cv_c_bigendian=no
+fi
+rm -f conftest*
+else
+  echo "configure: failed program was:" >&5
+  cat conftest.$ac_ext >&5
+fi
+rm -f conftest*
+if test $ac_cv_c_bigendian = unknown; then
+if test "$cross_compiling" = yes; then
+    { echo "configure: error: can not run test program while cross compiling" 1>&2; exit 1; }
+else
+  cat > conftest.$ac_ext <<EOF
+#line 1646 "configure"
+#include "confdefs.h"
+main () {
+  /* Are we little or big endian?  From Harbison&Steele.  */
+  union
+  {
+    long l;
+    char c[sizeof (long)];
+  } u;
+  u.l = 1;
+  exit (u.c[sizeof (long) - 1] == 1);
+}
+EOF
+if { (eval echo configure:1659: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest && (./conftest; exit) 2>/dev/null
+then
+  ac_cv_c_bigendian=no
+else
+  echo "configure: failed program was:" >&5
+  cat conftest.$ac_ext >&5
+  rm -fr conftest*
+  ac_cv_c_bigendian=yes
+fi
+rm -fr conftest*
+fi
+
+fi
+fi
+
+echo "$ac_t""$ac_cv_c_bigendian" 1>&6
+if test $ac_cv_c_bigendian = yes; then
+  cat >> confdefs.h <<\EOF
+#define WORDS_BIGENDIAN 1
+EOF
+
+fi
+
+  if test $ac_cv_c_bigendian = yes; then
+    sim_hostendian="-DWITH_HOST_BYTE_ORDER=BIG_ENDIAN"
+  else
+    sim_hostendian="-DWITH_HOST_BYTE_ORDER=LITTLE_ENDIAN"
+  fi
+else
+  sim_hostendian="-DWITH_HOST_BYTE_ORDER=0"
+fi
+fi
+
+
+# Check whether --enable-sim-warnings or --disable-sim-warnings was given.
+if test "${enable_sim_warnings+set}" = set; then
+  enableval="$enable_sim_warnings"
+  case "${enableval}" in
+  yes)	sim_warnings="-Werror -Wall -Wpointer-arith -Wmissing-prototypes -Wmissing-declarations ";;
+  no)	sim_warnings="-w";;
+  *)	sim_warnings=`echo "${enableval}" | sed -e "s/,/ /g"`;;
+esac
+if test x"$silent" != x"yes" && test x"$sim_warnings" != x""; then
+  echo "Setting warning flags = $sim_warnings" 6>&1
+fi
+else
+  sim_warnings=""
+fi
+
+
+default_sim_reserved_bits="1"
+# Check whether --enable-sim-reserved-bits or --disable-sim-reserved-bits was given.
+if test "${enable_sim_reserved_bits+set}" = set; then
+  enableval="$enable_sim_reserved_bits"
+  case "${enableval}" in
+  yes)	sim_reserved_bits="-DWITH_RESERVED_BITS=1";;
+  no)	sim_reserved_bits="-DWITH_RESERVED_BITS=0";;
+  *)	{ echo "configure: error: "--enable-sim-reserved-bits does not take a value"" 1>&2; exit 1; }; sim_reserved_bits="";;
+esac
+if test x"$silent" != x"yes" && test x"$sim_reserved_bits" != x""; then
+  echo "Setting reserved flags = $sim_reserved_bits" 6>&1
+fi
+else
+  sim_reserved_bits="-DWITH_RESERVED_BITS=${default_sim_reserved_bits}"
+fi
+
+wire_word_bitsize="32"
+wire_word_msb="31"
+wire_address_bitsize=""
+wire_cell_bitsize=""
+# Check whether --enable-sim-bitsize or --disable-sim-bitsize was given.
+if test "${enable_sim_bitsize+set}" = set; then
+  enableval="$enable_sim_bitsize"
+  sim_bitsize=
+case "${enableval}" in
+  64,63 | 64,63,* ) sim_bitsize="-DWITH_TARGET_WORD_BITSIZE=64 -DWITH_TARGET_WORD_MSB=63";;
+  32,31 | 32,31,* ) sim_bitsize="-DWITH_TARGET_WORD_BITSIZE=32 -DWITH_TARGET_WORD_MSB=31";;
+  64,0 | 64,0,* ) sim_bitsize="-DWITH_TARGET_WORD_BITSIZE=32 -DWITH_TARGET_WORD_MSB=0";;
+  32,0 | 64,0,* ) sim_bitsize="-DWITH_TARGET_WORD_BITSIZE=32 -DWITH_TARGET_WORD_MSB=0";;
+  32) if test x"$wire_word_msb" != x -a x"$wire_word_msb" != x0; then
+        sim_bitsize="-DWITH_TARGET_WORD_BITSIZE=32 -DWITH_TARGET_WORD_MSB=31"
+      else
+        sim_bitsize="-DWITH_TARGET_WORD_BITSIZE=32 -DWITH_TARGET_WORD_MSB=0"
+      fi ;;
+  64) if test x"$wire_word_msb" != x -a x"$wire_word_msb" != x0; then
+        sim_bitsize="-DWITH_TARGET_WORD_BITSIZE=64 -DWITH_TARGET_WORD_MSB=63"
+      else
+        sim_bitsize="-DWITH_TARGET_WORD_BITSIZE=64 -DWITH_TARGET_WORD_MSB=0"
+      fi ;;
+  *)  { echo "configure: error: "--enable-sim-bitsize was given $enableval.  Expected 32 or 64"" 1>&2; exit 1; } ;;
+esac
+# address bitsize
+tmp=`echo "${enableval}" | sed -e "s/^[0-9]*,*[0-9]*,*//"`
+case x"${tmp}" in
+  x ) ;;
+  x32 | x32,* ) sim_bitsize="${sim_bitsize} -DWITH_TARGET_ADDRESS_BITSIZE=32" ;;
+  x64 | x64,* ) sim_bitsize="${sim_bitsize} -DWITH_TARGET_ADDRESS_BITSIZE=64" ;;
+  * ) { echo "configure: error: "--enable-sim-bitsize was given address size $enableval.  Expected 32 or 64"" 1>&2; exit 1; } ;;
+esac
+# cell bitsize
+tmp=`echo "${enableval}" | sed -e "s/^[0-9]*,*[0-9*]*,*[0-9]*,*//"`
+case x"${tmp}" in
+  x ) ;;
+  x32 | x32,* ) sim_bitsize="${sim_bitsize} -DWITH_TARGET_CELL_BITSIZE=32" ;;
+  x64 | x64,* ) sim_bitsize="${sim_bitsize} -DWITH_TARGET_CELL_BITSIZE=64" ;;
+  * ) { echo "configure: error: "--enable-sim-bitsize was given cell size $enableval.  Expected 32 or 64"" 1>&2; exit 1; } ;;
+esac
+if test x"$silent" != x"yes" && test x"$sim_bitsize" != x""; then
+  echo "Setting bitsize flags = $sim_bitsize" 6>&1
+fi
+else
+  sim_bitsize=""
+if test x"$wire_word_bitsize" != x; then
+  sim_bitsize="$sim_bitsize -DWITH_TARGET_WORD_BITSIZE=$wire_word_bitsize"
+fi
+if test x"$wire_word_msb" != x; then
+  sim_bitsize="$sim_bitsize -DWITH_TARGET_WORD_MSB=$wire_word_msb"
+fi
+if test x"$wire_address_bitsize" != x; then
+  sim_bitsize="$sim_bitsize -DWITH_TARGET_ADDRESS_BITSIZE=$wire_address_bitsize"
+fi
+if test x"$wire_cell_bitsize" != x; then
+  sim_bitsize="$sim_bitsize -DWITH_TARGET_CELL_BITSIZE=$wire_cell_bitsize"
+fi
+fi
+
+
+for ac_func in time chmod utime fork execve execv chown
+do
+echo $ac_n "checking for $ac_func""... $ac_c" 1>&6
+echo "configure:1789: checking for $ac_func" >&5
+if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then
+  echo $ac_n "(cached) $ac_c" 1>&6
+else
+  cat > conftest.$ac_ext <<EOF
+#line 1794 "configure"
+#include "confdefs.h"
+/* System header to define __stub macros and hopefully few prototypes,
+    which can conflict with char $ac_func(); below.  */
+#include <assert.h>
+/* Override any gcc2 internal prototype to avoid an error.  */
+/* We use char because int might match the return type of a gcc2
+    builtin and then its argument prototype would still apply.  */
+char $ac_func();
+
+int main() {
+
+/* The GNU C library defines this for functions which it implements
+    to always fail with ENOSYS.  Some functions are actually named
+    something starting with __ and the normal name is an alias.  */
+#if defined (__stub_$ac_func) || defined (__stub___$ac_func)
+choke me
+#else
+$ac_func();
+#endif
+
+; return 0; }
+EOF
+if { (eval echo configure:1817: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then
+  rm -rf conftest*
+  eval "ac_cv_func_$ac_func=yes"
+else
+  echo "configure: failed program was:" >&5
+  cat conftest.$ac_ext >&5
+  rm -rf conftest*
+  eval "ac_cv_func_$ac_func=no"
+fi
+rm -f conftest*
+fi
+
+if eval "test \"`echo '$ac_cv_func_'$ac_func`\" = yes"; then
+  echo "$ac_t""yes" 1>&6
+    ac_tr_func=HAVE_`echo $ac_func | tr 'abcdefghijklmnopqrstuvwxyz' 'ABCDEFGHIJKLMNOPQRSTUVWXYZ'`
+  cat >> confdefs.h <<EOF
+#define $ac_tr_func 1
+EOF
+ 
+else
+  echo "$ac_t""no" 1>&6
+fi
+done
+
+for ac_hdr in unistd.h stdlib.h string.h strings.h utime.h time.h
 do
 ac_safe=`echo "$ac_hdr" | sed 'y%./+-%__p_%'`
 echo $ac_n "checking for $ac_hdr""... $ac_c" 1>&6
-echo "configure:1392: checking for $ac_hdr" >&5
+echo "configure:1845: checking for $ac_hdr" >&5
 if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   cat > conftest.$ac_ext <<EOF
-#line 1397 "configure"
+#line 1850 "configure"
 #include "confdefs.h"
 #include <$ac_hdr>
 EOF
 ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:1402: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:1855: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
 ac_err=`grep -v '^ *+' conftest.out`
 if test -z "$ac_err"; then
   rm -rf conftest*
@@ -1425,6 +1878,26 @@ fi
 done
 
 
+#
+# Enable common
+#
+# Check whether --enable-sim-common or --disable-sim-common was given.
+if test "${enable_sim_common+set}" = set; then
+  enableval="$enable_sim_common"
+  case "${enableval}" in
+  yes) sim_gen="-DWITH_COMMON=1"; mn10300_common="WITH";;
+  no)  sim_gen="-DWITH_COMMON=0"; mn10300_common="WITHOUT";;
+  *)   { echo "configure: error: "Unknown value $enableval passed to --enable-sim-common"" 1>&2; exit 1; }; sim_gen="";;
+esac
+if test x"$silent" != x"yes" && test x"$sim_gen" != x""; then
+  echo "Setting sim_common = $sim_common" 6>&1
+fi
+else
+  sim_gen=""; mn10300_common="WITHOUT"
+fi
+
+
+
 
 
 trap '' 1 2 15
@@ -1450,7 +1923,7 @@ EOF
 # Ultrix sh set writes to stderr and can't be redirected directly,
 # and sets the high bit in the cache file unless we assign to the vars.
 (set) 2>&1 |
-  case `(ac_space=' '; set) 2>&1 | grep ac_space` in
+  case `(ac_space=' '; set) 2>&1` in
   *ac_space=\ *)
     # `set' does not quote correctly, so add quotes (double-quote substitution
     # turns \\\\ into \\, and sed turns \\ into \).
@@ -1517,7 +1990,7 @@ do
     echo "running \${CONFIG_SHELL-/bin/sh} $0 $ac_configure_args --no-create --no-recursion"
     exec \${CONFIG_SHELL-/bin/sh} $0 $ac_configure_args --no-create --no-recursion ;;
   -version | --version | --versio | --versi | --vers | --ver | --ve | --v)
-    echo "$CONFIG_STATUS generated by autoconf version 2.12.1"
+    echo "$CONFIG_STATUS generated by autoconf version 2.12"
     exit 0 ;;
   -help | --help | --hel | --he | --h)
     echo "\$ac_cs_usage"; exit 0 ;;
@@ -1547,6 +2020,9 @@ s%@sim_float@%$sim_float%g
 s%@sim_scache@%$sim_scache%g
 s%@sim_default_model@%$sim_default_model%g
 s%@sim_hardware@%$sim_hardware%g
+s%@sim_hw_obj@%$sim_hw_obj%g
+s%@sim_dv_src@%$sim_dv_src%g
+s%@sim_dv_obj@%$sim_dv_obj%g
 s%@sim_inline@%$sim_inline%g
 s%@sim_packages@%$sim_packages%g
 s%@sim_regparm@%$sim_regparm%g
@@ -1555,7 +2031,6 @@ s%@sim_smp@%$sim_smp%g
 s%@sim_stdcall@%$sim_stdcall%g
 s%@sim_xor_endian@%$sim_xor_endian%g
 s%@sim_warnings@%$sim_warnings%g
-s%@SHELL@%$SHELL%g
 s%@CFLAGS@%$CFLAGS%g
 s%@CPPFLAGS@%$CPPFLAGS%g
 s%@CXXFLAGS@%$CXXFLAGS%g
@@ -1607,6 +2082,8 @@ s%@sim_debug@%$sim_debug%g
 s%@sim_stdio@%$sim_stdio%g
 s%@sim_trace@%$sim_trace%g
 s%@sim_profile@%$sim_profile%g
+s%@sim_gen@%$sim_gen%g
+s%@mn10300_common@%$mn10300_common%g
 
 CEOF
 EOF