Add ABFD argument to sim_open call. Pass through to sim_config so

that image properties such as endianness can be checked.

More strongly document the expected behavour of each of the sim_*
interfaces.

Add default endian argument to simulator config macro
SIM_AC_OPTION_ENDIAN.  Use in sim_config.

4 files changed, 583 insertions, 96 deletions

diff --git a/sim/mips/ChangeLog b/sim/mips/ChangeLog
index d0575e7..d4faa02 100644
--- a/sim/mips/ChangeLog
+++ b/sim/mips/ChangeLog
@@ -1,3 +1,26 @@
+Mon Aug 25 17:50:22 1997  Andrew Cagney  <cagney@b1.cygnus.com>
+
+	* configure: Regenerated to track ../common/aclocal.m4 changes.
+	* config.in: Ditto.
+
+Mon Aug 25 15:59:48 1997  Andrew Cagney  <cagney@b1.cygnus.com>
+
+	* interp.c (sim_open): Add ABFD argument.
+	(sim_load): Move call to sim_config from here.
+	(sim_open): To here.  Check return status.
+
+start-sanitize-r5900
+	* gencode.c (build_instruction): Do not define x8000000000000000,
+ 	x7FFFFFFFFFFFFFFF, or xFFFFFFFF80000000.
+
+end-sanitize-r5900
+start-sanitize-r5900
+Mon Jul 28 19:49:29 1997  Andrew Cagney  <cagney@b1.cygnus.com>
+
+	* gencode.c (build_instruction): For "pdivw", "pdivbw" and
+ 	"pdivuw" check for overflow due to signed divide by -1.
+
+end-sanitize-r5900
 Fri Jul 25 15:00:45 1997  Gavin Koch  <gavin@cygnus.com>
  
  	* gencode.c (build_instruction): Two arg MADD should
diff --git a/sim/mips/configure b/sim/mips/configure
index b64bb8e..c1becce 100755
--- a/sim/mips/configure
+++ b/sim/mips/configure
@@ -1,7 +1,7 @@
 #! /bin/sh
 
 # Guess values for system-dependent variables and create Makefiles.
-# Generated automatically using autoconf version 2.10 
+# Generated automatically using autoconf version 2.12 
 # Copyright (C) 1992, 93, 94, 95, 96 Free Software Foundation, Inc.
 #
 # This configure script is free software; the Free Software Foundation
@@ -21,6 +21,16 @@ ac_help="$ac_help
   --enable-sim-stdio			Specify whether to use stdio for console input/output."
 ac_help="$ac_help
   --enable-sim-trace=opts		Enable tracing flags"
+ac_help="$ac_help
+  --enable-sim-profile=opts		Enable profiling flags"
+ac_help="$ac_help
+  --enable-sim-inline=inlines		Specify which functions should be inlined."
+ac_help="$ac_help
+  --enable-sim-endian=endian		Specify target byte endian orientation."
+ac_help="$ac_help
+  --enable-sim-hostendain=end		Specify host byte endian orientation."
+ac_help="$ac_help
+  --enable-sim-warnings=opts		Extra CFLAGS for turning on compiler warnings except for idecode.o, semantics.o and psim.o"
 
 # Initialize some variables set by options.
 # The variables have the same names as the options, with
@@ -59,6 +69,8 @@ mandir='${prefix}/man'
 # Initialize some other variables.
 subdirs=
 MFLAGS= MAKEFLAGS=
+# Maximum number of lines to put in a shell here document.
+ac_max_here_lines=12
 
 ac_prev=
 for ac_option
@@ -340,7 +352,7 @@ EOF
     verbose=yes ;;
 
   -version | --version | --versio | --versi | --vers)
-    echo "configure generated by autoconf version 2.10"
+    echo "configure generated by autoconf version 2.12"
     exit 0 ;;
 
   -with-* | --with-*)
@@ -442,11 +454,14 @@ do
 done
 
 # NLS nuisances.
-# Only set LANG and LC_ALL to C if already set.
-# These must not be set unconditionally because not all systems understand
-# e.g. LANG=C (notably SCO).
-if test "${LC_ALL+set}" = set; then LC_ALL=C; export LC_ALL; fi
+# Only set these to C if already set.  These must not be set unconditionally
+# because not all systems understand e.g. LANG=C (notably SCO).
+# Fixing LC_MESSAGES prevents Solaris sh from translating var values in `set'!
+# Non-C LC_CTYPE values break the ctype check.
 if test "${LANG+set}"   = set; then LANG=C;   export LANG;   fi
+if test "${LC_ALL+set}" = set; then LC_ALL=C; export LC_ALL; fi
+if test "${LC_MESSAGES+set}" = set; then LC_MESSAGES=C; export LC_MESSAGES; fi
+if test "${LC_CTYPE+set}"    = set; then LC_CTYPE=C;    export LC_CTYPE;    fi
 
 # confdefs.h avoids OS command line length limits that DEFS can exceed.
 rm -rf conftest* confdefs.h
@@ -508,6 +523,7 @@ ac_ext=c
 ac_cpp='$CPP $CPPFLAGS'
 ac_compile='${CC-cc} -c $CFLAGS $CPPFLAGS conftest.$ac_ext 1>&5'
 ac_link='${CC-cc} -o conftest $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5'
+cross_compiling=$ac_cv_prog_cc_cross
 
 if (echo "testing\c"; echo 1,2,3) | grep c >/dev/null; then
   # Stardent Vistra SVR4 grep lacks -e, says ghazi@caip.rutgers.edu.
@@ -524,6 +540,7 @@ fi
 
 
 echo $ac_n "checking how to run the C preprocessor""... $ac_c" 1>&6
+echo "configure:544: checking how to run the C preprocessor" >&5
 # On Suns, sometimes $CPP names a directory.
 if test -n "$CPP" && test -d "$CPP"; then
   CPP=
@@ -538,33 +555,37 @@ else
   # On the NeXT, cc -E runs the code through the compiler's parser,
   # not just through cpp.
   cat > conftest.$ac_ext <<EOF
-#line 542 "configure"
+#line 559 "configure"
 #include "confdefs.h"
 #include <assert.h>
 Syntax Error
 EOF
 ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:548: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:565: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
 ac_err=`grep -v '^ *+' conftest.out`
 if test -z "$ac_err"; then
   :
 else
   echo "$ac_err" >&5
+  echo "configure: failed program was:" >&5
+  cat conftest.$ac_ext >&5
   rm -rf conftest*
   CPP="${CC-cc} -E -traditional-cpp"
   cat > conftest.$ac_ext <<EOF
-#line 557 "configure"
+#line 576 "configure"
 #include "confdefs.h"
 #include <assert.h>
 Syntax Error
 EOF
 ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:563: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:582: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
 ac_err=`grep -v '^ *+' conftest.out`
 if test -z "$ac_err"; then
   :
 else
   echo "$ac_err" >&5
+  echo "configure: failed program was:" >&5
+  cat conftest.$ac_ext >&5
   rm -rf conftest*
   CPP=/lib/cpp
 fi
@@ -630,6 +651,7 @@ else { echo "configure: error: can not run $ac_config_sub" 1>&2; exit 1; }
 fi
 
 echo $ac_n "checking host system type""... $ac_c" 1>&6
+echo "configure:655: checking host system type" >&5
 
 host_alias=$host
 case "$host_alias" in
@@ -644,12 +666,13 @@ NONE)
 esac
 
 host=`$ac_config_sub $host_alias`
-host_cpu=`echo $host | sed 's/^\(.*\)-\(.*\)-\(.*\)$/\1/'`
-host_vendor=`echo $host | sed 's/^\(.*\)-\(.*\)-\(.*\)$/\2/'`
-host_os=`echo $host | sed 's/^\(.*\)-\(.*\)-\(.*\)$/\3/'`
+host_cpu=`echo $host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\1/'`
+host_vendor=`echo $host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\2/'`
+host_os=`echo $host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'`
 echo "$ac_t""$host" 1>&6
 
 echo $ac_n "checking target system type""... $ac_c" 1>&6
+echo "configure:676: checking target system type" >&5
 
 target_alias=$target
 case "$target_alias" in
@@ -661,12 +684,13 @@ NONE)
 esac
 
 target=`$ac_config_sub $target_alias`
-target_cpu=`echo $target | sed 's/^\(.*\)-\(.*\)-\(.*\)$/\1/'`
-target_vendor=`echo $target | sed 's/^\(.*\)-\(.*\)-\(.*\)$/\2/'`
-target_os=`echo $target | sed 's/^\(.*\)-\(.*\)-\(.*\)$/\3/'`
+target_cpu=`echo $target | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\1/'`
+target_vendor=`echo $target | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\2/'`
+target_os=`echo $target | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'`
 echo "$ac_t""$target" 1>&6
 
 echo $ac_n "checking build system type""... $ac_c" 1>&6
+echo "configure:694: checking build system type" >&5
 
 build_alias=$build
 case "$build_alias" in
@@ -678,9 +702,9 @@ NONE)
 esac
 
 build=`$ac_config_sub $build_alias`
-build_cpu=`echo $build | sed 's/^\(.*\)-\(.*\)-\(.*\)$/\1/'`
-build_vendor=`echo $build | sed 's/^\(.*\)-\(.*\)-\(.*\)$/\2/'`
-build_os=`echo $build | sed 's/^\(.*\)-\(.*\)-\(.*\)$/\3/'`
+build_cpu=`echo $build | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\1/'`
+build_vendor=`echo $build | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\2/'`
+build_os=`echo $build | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'`
 echo "$ac_t""$build" 1>&6
 
 test "$host_alias" != "$target_alias" &&
@@ -710,6 +734,7 @@ test "$program_transform_name" = "" && program_transform_name="s,x,x,"
 # Extract the first word of "gcc", so it can be a program name with args.
 set dummy gcc; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
+echo "configure:738: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -738,6 +763,7 @@ if test -z "$CC"; then
   # Extract the first word of "cc", so it can be a program name with args.
 set dummy cc; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
+echo "configure:767: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -784,7 +810,47 @@ fi
   test -z "$CC" && { echo "configure: error: no acceptable cc found in \$PATH" 1>&2; exit 1; }
 fi
 
+echo $ac_n "checking whether the C compiler ($CC $CFLAGS $LDFLAGS) works""... $ac_c" 1>&6
+echo "configure:815: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) works" >&5
+
+ac_ext=c
+# CFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options.
+ac_cpp='$CPP $CPPFLAGS'
+ac_compile='${CC-cc} -c $CFLAGS $CPPFLAGS conftest.$ac_ext 1>&5'
+ac_link='${CC-cc} -o conftest $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5'
+cross_compiling=$ac_cv_prog_cc_cross
+
+cat > conftest.$ac_ext <<EOF
+#line 825 "configure"
+#include "confdefs.h"
+main(){return(0);}
+EOF
+if { (eval echo configure:829: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then
+  ac_cv_prog_cc_works=yes
+  # If we can't run a trivial program, we are probably using a cross compiler.
+  if (./conftest; exit) 2>/dev/null; then
+    ac_cv_prog_cc_cross=no
+  else
+    ac_cv_prog_cc_cross=yes
+  fi
+else
+  echo "configure: failed program was:" >&5
+  cat conftest.$ac_ext >&5
+  ac_cv_prog_cc_works=no
+fi
+rm -fr conftest*
+
+echo "$ac_t""$ac_cv_prog_cc_works" 1>&6
+if test $ac_cv_prog_cc_works = no; then
+  { echo "configure: error: installation or configuration problem: C compiler cannot create executables." 1>&2; exit 1; }
+fi
+echo $ac_n "checking whether the C compiler ($CC $CFLAGS $LDFLAGS) is a cross-compiler""... $ac_c" 1>&6
+echo "configure:849: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) is a cross-compiler" >&5
+echo "$ac_t""$ac_cv_prog_cc_cross" 1>&6
+cross_compiling=$ac_cv_prog_cc_cross
+
 echo $ac_n "checking whether we are using GNU C""... $ac_c" 1>&6
+echo "configure:854: checking whether we are using GNU C" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_gcc'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -793,7 +859,7 @@ else
   yes;
 #endif
 EOF
-if { ac_try='${CC-cc} -E conftest.c'; { (eval echo configure:797: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }; } | egrep yes >/dev/null 2>&1; then
+if { ac_try='${CC-cc} -E conftest.c'; { (eval echo configure:863: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }; } | egrep yes >/dev/null 2>&1; then
   ac_cv_prog_gcc=yes
 else
   ac_cv_prog_gcc=no
@@ -801,29 +867,34 @@ fi
 fi
 
 echo "$ac_t""$ac_cv_prog_gcc" 1>&6
+
 if test $ac_cv_prog_gcc = yes; then
   GCC=yes
-  if test "${CFLAGS+set}" != set; then
-    echo $ac_n "checking whether ${CC-cc} accepts -g""... $ac_c" 1>&6
-if eval "test \"`echo '$''{'ac_cv_prog_gcc_g'+set}'`\" = set"; then
+  ac_test_CFLAGS="${CFLAGS+set}"
+  ac_save_CFLAGS="$CFLAGS"
+  CFLAGS=
+  echo $ac_n "checking whether ${CC-cc} accepts -g""... $ac_c" 1>&6
+echo "configure:878: checking whether ${CC-cc} accepts -g" >&5
+if eval "test \"`echo '$''{'ac_cv_prog_cc_g'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   echo 'void f(){}' > conftest.c
 if test -z "`${CC-cc} -g -c conftest.c 2>&1`"; then
-  ac_cv_prog_gcc_g=yes
+  ac_cv_prog_cc_g=yes
 else
-  ac_cv_prog_gcc_g=no
+  ac_cv_prog_cc_g=no
 fi
 rm -f conftest*
 
 fi
 
-echo "$ac_t""$ac_cv_prog_gcc_g" 1>&6
-    if test $ac_cv_prog_gcc_g = yes; then
-      CFLAGS="-g -O"
-    else
-      CFLAGS="-O"
-    fi
+echo "$ac_t""$ac_cv_prog_cc_g" 1>&6
+  if test "$ac_test_CFLAGS" = set; then
+    CFLAGS="$ac_save_CFLAGS"
+  elif test $ac_cv_prog_cc_g = yes; then
+    CFLAGS="-g -O2"
+  else
+    CFLAGS="-O2"
   fi
 else
   GCC=
@@ -841,11 +912,12 @@ fi
 # SVR4 /usr/ucb/install, which tries to use the nonexistent group "staff"
 # ./install, which can be erroneously created by make from ./install.sh.
 echo $ac_n "checking for a BSD compatible install""... $ac_c" 1>&6
+echo "configure:916: checking for a BSD compatible install" >&5
 if test -z "$INSTALL"; then
 if eval "test \"`echo '$''{'ac_cv_path_install'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
-    IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS="${IFS}:"
+    IFS="${IFS= 	}"; ac_save_IFS="$IFS"; IFS="${IFS}:"
   for ac_dir in $PATH; do
     # Account for people who put trailing slashes in PATH elements.
     case "$ac_dir/" in
@@ -868,7 +940,7 @@ else
       ;;
     esac
   done
-  IFS="$ac_save_ifs"
+  IFS="$ac_save_IFS"
 
 fi
   if test "${ac_cv_path_install+set}" = set; then
@@ -905,6 +977,7 @@ AR=${AR-ar}
 # Extract the first word of "ranlib", so it can be a program name with args.
 set dummy ranlib; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
+echo "configure:981: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_RANLIB'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -932,26 +1005,31 @@ fi
 
 
 # Check for common headers.
-for ac_hdr in stdlib.h string.h strings.h unistd.h
+# FIXME: Seems to me this can cause problems for i386-windows hosts.
+# At one point there were hardcoded AC_DEFINE's if ${host} = i386-*-windows*.
+for ac_hdr in stdlib.h string.h strings.h unistd.h time.h sys/time.h sys/resource.h
 do
-ac_safe=`echo "$ac_hdr" | tr './\055' '___'`
+ac_safe=`echo "$ac_hdr" | sed 'y%./+-%__p_%'`
 echo $ac_n "checking for $ac_hdr""... $ac_c" 1>&6
+echo "configure:1015: checking for $ac_hdr" >&5
 if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   cat > conftest.$ac_ext <<EOF
-#line 944 "configure"
+#line 1020 "configure"
 #include "confdefs.h"
 #include <$ac_hdr>
 EOF
 ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:949: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:1025: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
 ac_err=`grep -v '^ *+' conftest.out`
 if test -z "$ac_err"; then
   rm -rf conftest*
   eval "ac_cv_header_$ac_safe=yes"
 else
   echo "$ac_err" >&5
+  echo "configure: failed program was:" >&5
+  cat conftest.$ac_ext >&5
   rm -rf conftest*
   eval "ac_cv_header_$ac_safe=no"
 fi
@@ -959,7 +1037,7 @@ rm -f conftest*
 fi
 if eval "test \"`echo '$ac_cv_header_'$ac_safe`\" = yes"; then
   echo "$ac_t""yes" 1>&6
-    ac_tr_hdr=HAVE_`echo $ac_hdr | tr 'abcdefghijklmnopqrstuvwxyz./\055' 'ABCDEFGHIJKLMNOPQRSTUVWXYZ___'`
+    ac_tr_hdr=HAVE_`echo $ac_hdr | sed 'y%abcdefghijklmnopqrstuvwxyz./-%ABCDEFGHIJKLMNOPQRSTUVWXYZ___%'`
   cat >> confdefs.h <<EOF
 #define $ac_tr_hdr 1
 EOF
@@ -969,6 +1047,61 @@ else
 fi
 done
 
+for ac_func in getrusage time
+do
+echo $ac_n "checking for $ac_func""... $ac_c" 1>&6
+echo "configure:1054: checking for $ac_func" >&5
+if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then
+  echo $ac_n "(cached) $ac_c" 1>&6
+else
+  cat > conftest.$ac_ext <<EOF
+#line 1059 "configure"
+#include "confdefs.h"
+/* System header to define __stub macros and hopefully few prototypes,
+    which can conflict with char $ac_func(); below.  */
+#include <assert.h>
+/* Override any gcc2 internal prototype to avoid an error.  */
+/* We use char because int might match the return type of a gcc2
+    builtin and then its argument prototype would still apply.  */
+char $ac_func();
+
+int main() {
+
+/* The GNU C library defines this for functions which it implements
+    to always fail with ENOSYS.  Some functions are actually named
+    something starting with __ and the normal name is an alias.  */
+#if defined (__stub_$ac_func) || defined (__stub___$ac_func)
+choke me
+#else
+$ac_func();
+#endif
+
+; return 0; }
+EOF
+if { (eval echo configure:1082: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then
+  rm -rf conftest*
+  eval "ac_cv_func_$ac_func=yes"
+else
+  echo "configure: failed program was:" >&5
+  cat conftest.$ac_ext >&5
+  rm -rf conftest*
+  eval "ac_cv_func_$ac_func=no"
+fi
+rm -f conftest*
+fi
+
+if eval "test \"`echo '$ac_cv_func_'$ac_func`\" = yes"; then
+  echo "$ac_t""yes" 1>&6
+    ac_tr_func=HAVE_`echo $ac_func | tr 'abcdefghijklmnopqrstuvwxyz' 'ABCDEFGHIJKLMNOPQRSTUVWXYZ'`
+  cat >> confdefs.h <<EOF
+#define $ac_tr_func 1
+EOF
+ 
+else
+  echo "$ac_t""no" 1>&6
+fi
+done
+
 
 . ${srcdir}/../../bfd/configure.host
 
@@ -1047,9 +1180,20 @@ fi
 if test "${enable_sim_trace+set}" = set; then
   enableval="$enable_sim_trace"
   case "${enableval}" in
-  yes)	sim_trace="-DTRACE=1 -DWITH_TRACE=1";;
+  yes)	sim_trace="-DTRACE=1 -DWITH_TRACE=-1";;
   no)	sim_trace="-DTRACE=0 -DWITH_TRACE=0";;
-  *)	sim_trace="-DTRACE='(${enableval})' -DWITH_TRACE='(${enableval})'";;
+  [-0-9]*)
+	sim_trace="-DTRACE='(${enableval})' -DWITH_TRACE='(${enableval})'";;
+  [a-z]*)
+	sim_trace=""
+	for x in `echo "$enableval" | sed -e "s/,/ /g"`; do
+	  if test x"$sim_trace" = x; then
+	    sim_trace="-DWITH_TRACE='(TRACE_$x"
+	  else
+	    sim_trace="${sim_trace}|TRACE_$x"
+	  fi
+	done
+	sim_trace="$sim_trace)'" ;;
 esac
 if test x"$silent" != x"yes" && test x"$sim_trace" != x""; then
   echo "Setting sim trace = $sim_trace" 6>&1
@@ -1060,12 +1204,41 @@ fi
 
 
 
+# Check whether --enable-sim-profile or --disable-sim-profile was given.
+if test "${enable_sim_profile+set}" = set; then
+  enableval="$enable_sim_profile"
+  case "${enableval}" in
+  yes)	sim_profile="-DPROFILE=1 -DWITH_PROFILE=-1";;
+  no)	sim_profile="-DPROFILE=0 -DWITH_PROFILE=0";;
+  [-0-9]*)
+	sim_profile="-DPROFILE='(${enableval})' -DWITH_PROFILE='(${enableval})'";;
+  [a-z]*)
+	sim_profile=""
+	for x in `echo "$enableval" | sed -e "s/,/ /g"`; do
+	  if test x"$sim_profile" = x; then
+	    sim_profile="-DWITH_PROFILE='(PROFILE_$x"
+	  else
+	    sim_profile="${sim_profile}|PROFILE_$x"
+	  fi
+	done
+	sim_profile="$sim_profile)'" ;;
+esac
+if test x"$silent" != x"yes" && test x"$sim_profile" != x""; then
+  echo "Setting sim profile = $sim_profile" 6>&1
+fi
+else
+  sim_profile=""
+fi
+
+
+
 echo $ac_n "checking return type of signal handlers""... $ac_c" 1>&6
+echo "configure:1237: checking return type of signal handlers" >&5
 if eval "test \"`echo '$''{'ac_cv_type_signal'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   cat > conftest.$ac_ext <<EOF
-#line 1069 "configure"
+#line 1242 "configure"
 #include "confdefs.h"
 #include <sys/types.h>
 #include <signal.h>
@@ -1078,20 +1251,20 @@ extern "C" void (*signal (int, void (*)(int)))(int);
 void (*signal ()) ();
 #endif
 
-int main() { return 0; }
-int t() {
+int main() {
 int i;
 ; return 0; }
 EOF
-if { (eval echo configure:1087: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:1259: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
   rm -rf conftest*
   ac_cv_type_signal=void
 else
+  echo "configure: failed program was:" >&5
+  cat conftest.$ac_ext >&5
   rm -rf conftest*
   ac_cv_type_signal=int
 fi
 rm -f conftest*
-
 fi
 
 echo "$ac_t""$ac_cv_type_signal" 1>&6
@@ -1122,6 +1295,215 @@ sim_link_links="${sim_link_links} targ-vals.def"
 
 
 
+
+default_sim_inline="-DDEFAULT_INLINE=0"
+# Check whether --enable-sim-inline or --disable-sim-inline was given.
+if test "${enable_sim_inline+set}" = set; then
+  enableval="$enable_sim_inline"
+  sim_inline=""
+case "$enableval" in
+  no)		sim_inline="-DDEFAULT_INLINE=0";;
+  0)		sim_inline="-DDEFAULT_INLINE=0";;
+  yes | 2)	sim_inline="-DDEFAULT_INLINE=ALL_INLINE";;
+  1)		sim_inline="-DDEFAULT_INLINE=INLINE_LOCALS";;
+  *) for x in `echo "$enableval" | sed -e "s/,/ /g"`; do
+       new_flag=""
+       case "$x" in
+	 *_INLINE=*)	new_flag="-D$x";;
+	 *=*)		new_flag=`echo "$x" | sed -e "s/=/_INLINE=/" -e "s/^/-D/"`;;
+	 *_INLINE)	new_flag="-D$x=ALL_INLINE";;
+	 *)		new_flag="-D$x""_INLINE=ALL_INLINE";;
+       esac
+       if test x"$sim_inline" = x""; then
+	 sim_inline="$new_flag"
+       else
+	 sim_inline="$sim_inline $new_flag"
+       fi
+     done;;
+esac
+if test x"$silent" != x"yes" && test x"$sim_inline" != x""; then
+  echo "Setting inline flags = $sim_inline" 6>&1
+fi
+else
+  if test x"$GCC" != "x" -a x"${default_sim_inline}" != "x" ; then
+  sim_inline="${default_sim_inline}"
+  if test x"$silent" != x"yes"; then
+    echo "Setting inline flags = $sim_inline" 6>&1
+  fi
+else
+  sim_inline=""
+fi
+fi
+
+
+
+wire_endian="0"
+default_endian="0"
+default_sim_endian="-DWITH_TARGET_BYTE_ORDER=0"
+# Check whether --enable-sim-endian or --disable-sim-endian was given.
+if test "${enable_sim_endian+set}" = set; then
+  enableval="$enable_sim_endian"
+  case "${enableval}" in
+  b*|B*) sim_endian="-DWITH_TARGET_BYTE_ORDER=BIG_ENDIAN";;
+  l*|L*) sim_endian="-DWITH_TARGET_BYTE_ORDER=LITTLE_ENDIAN";;
+  yes)	 if test x"$wire_endian" != x; then
+	   sim_endian="-DWITH_TARGET_BYTE_ORDER=${wire_endian}"
+	 else
+	   echo "No hard-wired endian for target $target" 1>&6
+	   sim_endian="-DWITH_TARGET_BYTE_ORDER=0"
+	 fi;;
+  no)	 if test x"$default_endian" != x; then
+	   sim_endian="-DWITH_DEFAULT_TARGET_BYTE_ORDER=${default_endian}"
+	 else
+	   echo "No default endian for target $target" 1>&6
+	   sim_endian="-DWITH_DEFAULT_TARGET_BYTE_ORDER=0"
+	 fi;;
+  *)	 { echo "configure: error: "Unknown value $enableval for --enable-sim-endian"" 1>&2; exit 1; }; sim_endian="";;
+esac
+if test x"$silent" != x"yes" && test x"$sim_endian" != x""; then
+  echo "Setting endian flags = $sim_endian" 6>&1
+fi
+else
+  sim_endian="${default_sim_endian}"
+fi
+
+
+
+# Check whether --enable-sim-hostendian or --disable-sim-hostendian was given.
+if test "${enable_sim_hostendian+set}" = set; then
+  enableval="$enable_sim_hostendian"
+  case "${enableval}" in
+  no)	 sim_hostendian="-DWITH_HOST_BYTE_ORDER=0";;
+  b*|B*) sim_hostendian="-DWITH_HOST_BYTE_ORDER=BIG_ENDIAN";;
+  l*|L*) sim_hostendian="-DWITH_HOST_BYTE_ORDER=LITTLE_ENDIAN";;
+  *)	 { echo "configure: error: "Unknown value $enableval for --enable-sim-hostendian"" 1>&2; exit 1; }; sim_hostendian="";;
+esac
+if test x"$silent" != x"yes" && test x"$sim_hostendian" != x""; then
+  echo "Setting hostendian flags = $sim_hostendian" 6>&1
+fi
+else
+  
+if test "x$cross_compiling" = "xno"; then
+  echo $ac_n "checking whether byte ordering is bigendian""... $ac_c" 1>&6
+echo "configure:1389: checking whether byte ordering is bigendian" >&5
+if eval "test \"`echo '$''{'ac_cv_c_bigendian'+set}'`\" = set"; then
+  echo $ac_n "(cached) $ac_c" 1>&6
+else
+  ac_cv_c_bigendian=unknown
+# See if sys/param.h defines the BYTE_ORDER macro.
+cat > conftest.$ac_ext <<EOF
+#line 1396 "configure"
+#include "confdefs.h"
+#include <sys/types.h>
+#include <sys/param.h>
+int main() {
+
+#if !BYTE_ORDER || !BIG_ENDIAN || !LITTLE_ENDIAN
+ bogus endian macros
+#endif
+; return 0; }
+EOF
+if { (eval echo configure:1407: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+  rm -rf conftest*
+  # It does; now see whether it defined to BIG_ENDIAN or not.
+cat > conftest.$ac_ext <<EOF
+#line 1411 "configure"
+#include "confdefs.h"
+#include <sys/types.h>
+#include <sys/param.h>
+int main() {
+
+#if BYTE_ORDER != BIG_ENDIAN
+ not big endian
+#endif
+; return 0; }
+EOF
+if { (eval echo configure:1422: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+  rm -rf conftest*
+  ac_cv_c_bigendian=yes
+else
+  echo "configure: failed program was:" >&5
+  cat conftest.$ac_ext >&5
+  rm -rf conftest*
+  ac_cv_c_bigendian=no
+fi
+rm -f conftest*
+else
+  echo "configure: failed program was:" >&5
+  cat conftest.$ac_ext >&5
+fi
+rm -f conftest*
+if test $ac_cv_c_bigendian = unknown; then
+if test "$cross_compiling" = yes; then
+    { echo "configure: error: can not run test program while cross compiling" 1>&2; exit 1; }
+else
+  cat > conftest.$ac_ext <<EOF
+#line 1442 "configure"
+#include "confdefs.h"
+main () {
+  /* Are we little or big endian?  From Harbison&Steele.  */
+  union
+  {
+    long l;
+    char c[sizeof (long)];
+  } u;
+  u.l = 1;
+  exit (u.c[sizeof (long) - 1] == 1);
+}
+EOF
+if { (eval echo configure:1455: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest && (./conftest; exit) 2>/dev/null
+then
+  ac_cv_c_bigendian=no
+else
+  echo "configure: failed program was:" >&5
+  cat conftest.$ac_ext >&5
+  rm -fr conftest*
+  ac_cv_c_bigendian=yes
+fi
+rm -fr conftest*
+fi
+
+fi
+fi
+
+echo "$ac_t""$ac_cv_c_bigendian" 1>&6
+if test $ac_cv_c_bigendian = yes; then
+  cat >> confdefs.h <<\EOF
+#define WORDS_BIGENDIAN 1
+EOF
+
+fi
+
+  if test $ac_cv_c_bigendian = yes; then
+    sim_hostendian="-DWITH_HOST_BYTE_ORDER=BIG_ENDIAN"
+  else
+    sim_hostendian="-DWITH_HOST_BYTE_ORDER=LITTLE_ENDIAN"
+  fi
+else
+  sim_hostendian="-DWITH_HOST_BYTE_ORDER=0"
+fi
+fi
+
+
+
+# Check whether --enable-sim-warnings or --disable-sim-warnings was given.
+if test "${enable_sim_warnings+set}" = set; then
+  enableval="$enable_sim_warnings"
+  case "${enableval}" in
+  yes)	sim_warnings="-Werror -Wall -Wpointer-arith -Wmissing-prototypes -Wmissing-declarations ";;
+  no)	sim_warnings="-w";;
+  *)	sim_warnings=`echo "${enableval}" | sed -e "s/,/ /g"`;;
+esac
+if test x"$silent" != x"yes" && test x"$sim_warnings" != x""; then
+  echo "Setting warning flags = $sim_warnings" 6>&1
+fi
+else
+  sim_warnings=""
+fi
+
+
+
+
 # Ensure a reasonable default simulator is constructed:
 case "${target}" in
 # start-sanitize-r5900
@@ -1134,26 +1516,29 @@ case "${target}" in
 esac
 
 
-for ac_hdr in string.h strings.h stdlib.h
+for ac_hdr in string.h strings.h stdlib.h stdlib.h
 do
-ac_safe=`echo "$ac_hdr" | tr './\055' '___'`
+ac_safe=`echo "$ac_hdr" | sed 'y%./+-%__p_%'`
 echo $ac_n "checking for $ac_hdr""... $ac_c" 1>&6
+echo "configure:1524: checking for $ac_hdr" >&5
 if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   cat > conftest.$ac_ext <<EOF
-#line 1146 "configure"
+#line 1529 "configure"
 #include "confdefs.h"
 #include <$ac_hdr>
 EOF
 ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:1151: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:1534: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
 ac_err=`grep -v '^ *+' conftest.out`
 if test -z "$ac_err"; then
   rm -rf conftest*
   eval "ac_cv_header_$ac_safe=yes"
 else
   echo "$ac_err" >&5
+  echo "configure: failed program was:" >&5
+  cat conftest.$ac_ext >&5
   rm -rf conftest*
   eval "ac_cv_header_$ac_safe=no"
 fi
@@ -1161,7 +1546,7 @@ rm -f conftest*
 fi
 if eval "test \"`echo '$ac_cv_header_'$ac_safe`\" = yes"; then
   echo "$ac_t""yes" 1>&6
-    ac_tr_hdr=HAVE_`echo $ac_hdr | tr 'abcdefghijklmnopqrstuvwxyz./\055' 'ABCDEFGHIJKLMNOPQRSTUVWXYZ___'`
+    ac_tr_hdr=HAVE_`echo $ac_hdr | sed 'y%abcdefghijklmnopqrstuvwxyz./-%ABCDEFGHIJKLMNOPQRSTUVWXYZ___%'`
   cat >> confdefs.h <<EOF
 #define $ac_tr_hdr 1
 EOF
@@ -1171,30 +1556,32 @@ else
 fi
 done
 
-echo $ac_n "checking for -lm""... $ac_c" 1>&6
-ac_lib_var=`echo m'_'fabs | tr './+\055' '__p_'`
+echo $ac_n "checking for fabs in -lm""... $ac_c" 1>&6
+echo "configure:1561: checking for fabs in -lm" >&5
+ac_lib_var=`echo m'_'fabs | sed 'y%./+-%__p_%'`
 if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   ac_save_LIBS="$LIBS"
 LIBS="-lm  $LIBS"
 cat > conftest.$ac_ext <<EOF
-#line 1183 "configure"
+#line 1569 "configure"
 #include "confdefs.h"
 /* Override any gcc2 internal prototype to avoid an error.  */
 /* We use char because int might match the return type of a gcc2
     builtin and then its argument prototype would still apply.  */
 char fabs();
 
-int main() { return 0; }
-int t() {
+int main() {
 fabs()
 ; return 0; }
 EOF
-if { (eval echo configure:1195: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; }; then
+if { (eval echo configure:1580: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then
   rm -rf conftest*
   eval "ac_cv_lib_$ac_lib_var=yes"
 else
+  echo "configure: failed program was:" >&5
+  cat conftest.$ac_ext >&5
   rm -rf conftest*
   eval "ac_cv_lib_$ac_lib_var=no"
 fi
@@ -1204,7 +1591,8 @@ LIBS="$ac_save_LIBS"
 fi
 if eval "test \"`echo '$ac_cv_lib_'$ac_lib_var`\" = yes"; then
   echo "$ac_t""yes" 1>&6
-    ac_tr_lib=HAVE_LIB`echo m | tr 'abcdefghijklmnopqrstuvwxyz' 'ABCDEFGHIJKLMNOPQRSTUVWXYZ'`
+    ac_tr_lib=HAVE_LIB`echo m | sed -e 's/[^a-zA-Z0-9_]/_/g' \
+    -e 'y/abcdefghijklmnopqrstuvwxyz/ABCDEFGHIJKLMNOPQRSTUVWXYZ/'`
   cat >> confdefs.h <<EOF
 #define $ac_tr_lib 1
 EOF
@@ -1218,11 +1606,12 @@ fi
 for ac_func in aint anint sqrt
 do
 echo $ac_n "checking for $ac_func""... $ac_c" 1>&6
+echo "configure:1610: checking for $ac_func" >&5
 if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   cat > conftest.$ac_ext <<EOF
-#line 1226 "configure"
+#line 1615 "configure"
 #include "confdefs.h"
 /* System header to define __stub macros and hopefully few prototypes,
     which can conflict with char $ac_func(); below.  */
@@ -1232,8 +1621,7 @@ else
     builtin and then its argument prototype would still apply.  */
 char $ac_func();
 
-int main() { return 0; }
-int t() {
+int main() {
 
 /* The GNU C library defines this for functions which it implements
     to always fail with ENOSYS.  Some functions are actually named
@@ -1246,16 +1634,18 @@ $ac_func();
 
 ; return 0; }
 EOF
-if { (eval echo configure:1250: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; }; then
+if { (eval echo configure:1638: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then
   rm -rf conftest*
   eval "ac_cv_func_$ac_func=yes"
 else
+  echo "configure: failed program was:" >&5
+  cat conftest.$ac_ext >&5
   rm -rf conftest*
   eval "ac_cv_func_$ac_func=no"
 fi
 rm -f conftest*
-
 fi
+
 if eval "test \"`echo '$ac_cv_func_'$ac_func`\" = yes"; then
   echo "$ac_t""yes" 1>&6
     ac_tr_func=HAVE_`echo $ac_func | tr 'abcdefghijklmnopqrstuvwxyz' 'ABCDEFGHIJKLMNOPQRSTUVWXYZ'`
@@ -1288,11 +1678,25 @@ cat > confcache <<\EOF
 # --recheck option to rerun configure.
 #
 EOF
+# The following way of writing the cache mishandles newlines in values,
+# but we know of no workaround that is simple, portable, and efficient.
+# So, don't put newlines in cache variables' values.
 # Ultrix sh set writes to stderr and can't be redirected directly,
 # and sets the high bit in the cache file unless we assign to the vars.
 (set) 2>&1 |
-  sed -n "s/^\([a-zA-Z0-9_]*_cv_[a-zA-Z0-9_]*\)=\(.*\)/\1=\${\1='\2'}/p" \
-  >> confcache
+  case `(ac_space=' '; set) 2>&1` in
+  *ac_space=\ *)
+    # `set' does not quote correctly, so add quotes (double-quote substitution
+    # turns \\\\ into \\, and sed turns \\ into \).
+    sed -n \
+      -e "s/'/'\\\\''/g" \
+      -e "s/^\\([a-zA-Z0-9_]*_cv_[a-zA-Z0-9_]*\\)=\\(.*\\)/\\1=\${\\1='\\2'}/p"
+    ;;
+  *)
+    # `set' quotes correctly as required by POSIX, so do not add quotes.
+    sed -n -e 's/^\([a-zA-Z0-9_]*_cv_[a-zA-Z0-9_]*\)=\(.*\)/\1=${\1=\2}/p'
+    ;;
+  esac >> confcache
 if cmp -s $cache_file confcache; then
   :
 else
@@ -1347,7 +1751,7 @@ do
     echo "running \${CONFIG_SHELL-/bin/sh} $0 $ac_configure_args --no-create --no-recursion"
     exec \${CONFIG_SHELL-/bin/sh} $0 $ac_configure_args --no-create --no-recursion ;;
   -version | --version | --versio | --versi | --vers | --ver | --ve | --v)
-    echo "$CONFIG_STATUS generated by autoconf version 2.10"
+    echo "$CONFIG_STATUS generated by autoconf version 2.12"
     exit 0 ;;
   -help | --help | --hel | --he | --h)
     echo "\$ac_cs_usage"; exit 0 ;;
@@ -1416,24 +1820,65 @@ s%@sim_cflags@%$sim_cflags%g
 s%@sim_debug@%$sim_debug%g
 s%@sim_stdio@%$sim_stdio%g
 s%@sim_trace@%$sim_trace%g
+s%@sim_profile@%$sim_profile%g
+s%@sim_inline@%$sim_inline%g
+s%@sim_endian@%$sim_endian%g
+s%@sim_hostendian@%$sim_hostendian%g
+s%@sim_warnings@%$sim_warnings%g
 s%@SIMCONF@%$SIMCONF%g
 
 CEOF
 EOF
+
+cat >> $CONFIG_STATUS <<\EOF
+
+# Split the substitutions into bite-sized pieces for seds with
+# small command number limits, like on Digital OSF/1 and HP-UX.
+ac_max_sed_cmds=90 # Maximum number of lines to put in a sed script.
+ac_file=1 # Number of current file.
+ac_beg=1 # First line for current file.
+ac_end=$ac_max_sed_cmds # Line after last line for current file.
+ac_more_lines=:
+ac_sed_cmds=""
+while $ac_more_lines; do
+  if test $ac_beg -gt 1; then
+    sed "1,${ac_beg}d; ${ac_end}q" conftest.subs > conftest.s$ac_file
+  else
+    sed "${ac_end}q" conftest.subs > conftest.s$ac_file
+  fi
+  if test ! -s conftest.s$ac_file; then
+    ac_more_lines=false
+    rm -f conftest.s$ac_file
+  else
+    if test -z "$ac_sed_cmds"; then
+      ac_sed_cmds="sed -f conftest.s$ac_file"
+    else
+      ac_sed_cmds="$ac_sed_cmds | sed -f conftest.s$ac_file"
+    fi
+    ac_file=`expr $ac_file + 1`
+    ac_beg=$ac_end
+    ac_end=`expr $ac_end + $ac_max_sed_cmds`
+  fi
+done
+if test -z "$ac_sed_cmds"; then
+  ac_sed_cmds=cat
+fi
+EOF
+
 cat >> $CONFIG_STATUS <<EOF
 
 CONFIG_FILES=\${CONFIG_FILES-"Makefile.sim:Makefile.in Make-common.sim:../common/Make-common.in"}
 EOF
 cat >> $CONFIG_STATUS <<\EOF
 for ac_file in .. $CONFIG_FILES; do if test "x$ac_file" != x..; then
-  # Support "outfile[:infile]", defaulting infile="outfile.in".
+  # Support "outfile[:infile[:infile...]]", defaulting infile="outfile.in".
   case "$ac_file" in
-  *:*) ac_file_in=`echo "$ac_file"|sed 's%.*:%%'`
+  *:*) ac_file_in=`echo "$ac_file"|sed 's%[^:]*:%%'`
        ac_file=`echo "$ac_file"|sed 's%:.*%%'` ;;
   *) ac_file_in="${ac_file}.in" ;;
   esac
 
-  # Adjust relative srcdir, etc. for subdirectories.
+  # Adjust a relative srcdir, top_srcdir, and INSTALL for subdirectories.
 
   # Remove last slash and all that follows it.  Not all systems have dirname.
   ac_dir=`echo $ac_file|sed 's%/[^/][^/]*$%%'`
@@ -1461,6 +1906,7 @@ for ac_file in .. $CONFIG_FILES; do if test "x$ac_file" != x..; then
   [/$]*) INSTALL="$ac_given_INSTALL" ;;
   *) INSTALL="$ac_dots$ac_given_INSTALL" ;;
   esac
+
   echo creating "$ac_file"
   rm -f "$ac_file"
   configure_input="Generated automatically from `echo $ac_file_in|sed 's%.*/%%'` by configure."
@@ -1469,14 +1915,16 @@ for ac_file in .. $CONFIG_FILES; do if test "x$ac_file" != x..; then
 # $configure_input" ;;
   *) ac_comsub= ;;
   esac
+
+  ac_file_inputs=`echo $ac_file_in|sed -e "s%^%$ac_given_srcdir/%" -e "s%:% $ac_given_srcdir/%g"`
   sed -e "$ac_comsub
 s%@configure_input@%$configure_input%g
 s%@srcdir@%$srcdir%g
 s%@top_srcdir@%$top_srcdir%g
 s%@INSTALL@%$INSTALL%g
-" -f conftest.subs $ac_given_srcdir/$ac_file_in > $ac_file
+" $ac_file_inputs | (eval "$ac_sed_cmds") > $ac_file
 fi; done
-rm -f conftest.subs
+rm -f conftest.s*
 
 # These sed commands are passed to sed as "A NAME B NAME C VALUE D", where
 # NAME is the cpp macro being defined and VALUE is the value it is being given.
@@ -1497,11 +1945,17 @@ ac_eB='$%\1#\2define\3'
 ac_eC=' '
 ac_eD='%g'
 
-CONFIG_HEADERS=${CONFIG_HEADERS-"config.h:config.in"}
+if test "${CONFIG_HEADERS+set}" != set; then
+EOF
+cat >> $CONFIG_STATUS <<EOF
+  CONFIG_HEADERS="config.h:config.in"
+EOF
+cat >> $CONFIG_STATUS <<\EOF
+fi
 for ac_file in .. $CONFIG_HEADERS; do if test "x$ac_file" != x..; then
-  # Support "outfile[:infile]", defaulting infile="outfile.in".
+  # Support "outfile[:infile[:infile...]]", defaulting infile="outfile.in".
   case "$ac_file" in
-  *:*) ac_file_in=`echo "$ac_file"|sed 's%.*:%%'`
+  *:*) ac_file_in=`echo "$ac_file"|sed 's%[^:]*:%%'`
        ac_file=`echo "$ac_file"|sed 's%:.*%%'` ;;
   *) ac_file_in="${ac_file}.in" ;;
   esac
@@ -1509,7 +1963,8 @@ for ac_file in .. $CONFIG_HEADERS; do if test "x$ac_file" != x..; then
   echo creating $ac_file
 
   rm -f conftest.frag conftest.in conftest.out
-  cp $ac_given_srcdir/$ac_file_in conftest.in
+  ac_file_inputs=`echo $ac_file_in|sed -e "s%^%$ac_given_srcdir/%" -e "s%:% $ac_given_srcdir/%g"`
+  cat $ac_file_inputs > conftest.in
 
 EOF
 
@@ -1537,8 +1992,6 @@ EOF
 
 # Break up conftest.vals because some shells have a limit on
 # the size of here documents, and old seds have small limits too.
-# Maximum number of lines to put in a single here document.
-ac_max_here_lines=12
 
 rm -f conftest.tail
 while :
@@ -1625,7 +2078,11 @@ while test -n "$ac_sources"; do
     { echo "configure: error: can not link $ac_dest to $srcdir/$ac_source" 1>&2; exit 1; }
   fi
 done
+EOF
+cat >> $CONFIG_STATUS <<EOF
 
+EOF
+cat >> $CONFIG_STATUS <<\EOF
 case "x$CONFIG_FILES" in xMakefile*)
    echo "Merging Makefile.sim+Make-common.sim into Makefile ..."
    rm -f Makesim1.tmp Makesim2.tmp Makefile
diff --git a/sim/mips/gencode.c b/sim/mips/gencode.c
index 5e4563d..6ef01bf 100644
--- a/sim/mips/gencode.c
+++ b/sim/mips/gencode.c
@@ -3927,9 +3927,6 @@ build_instruction (doisa, features, mips16, insn)
      printf("  signed64 t = ((unsigned64)HI_UW(0) << 32) | (unsigned64)LO_UW(0);\n");
      printf("  signed64 u = ((unsigned64)HI_UW(2) << 32) | (unsigned64)LO_UW(2);\n");
      printf("  signed64 x000000007FFFFFFF = LSMASK64 (31);\n");
-     printf("  signed64 xFFFFFFFF80000000 = MSMASK64 (33);\n");
-     printf("  signed64 x7FFFFFFFFFFFFFFF = LSMASK64 (63);\n");
-     printf("  signed64 x8000000000000000 = MSMASK64 (1);\n");
      printf("  signed64 x0000000080000000 = x000000007FFFFFFF + 1;\n");
      printf("  signed64 minus0000000080000000 = -x0000000080000000;\n");
      printf("  if ( t > x000000007FFFFFFF )\n");
diff --git a/sim/mips/interp.c b/sim/mips/interp.c
index 1736ad7..3d68eb4 100644
--- a/sim/mips/interp.c
+++ b/sim/mips/interp.c
@@ -283,7 +283,14 @@ SUB_REG_FETCH - return as lvalue some sub-part of a "register"
    A  - low part of "register"
    A1 - high part of register
 */
-#define SUB_REG_FETCH(T,TC,A,A1,I) (*(((T*)(((I) < (TC)) ? (A) : (A1))) + ((I) % (TC))))
+#define SUB_REG_FETCH(T,TC,A,A1,I) \
+(*(((I) < (TC) ? (T*)(A) : (T*)(A1)) \
+   + (CURRENT_HOST_BYTE_ORDER == BIG_ENDIAN \
+      ? ((TC) - 1 - (I) % (TC)) \
+      : ((I) % (TC)) \
+      ) \
+   ) \
+ )
 
 /* 
 GPR_<type>(R,I) - return, as lvalue, the I'th <type> of general register R 
@@ -292,18 +299,16 @@ GPR_<type>(R,I) - return, as lvalue, the I'th <type> of general register R
                   2 is B=byte H=halfword W=word D=doubleword 
 */
 
-#define SUB_REG_SB(A,A1,I) SUB_REG_FETCH(signed char,       BYTES_IN_MIPS_REGS,       A, A1, I)
-#define SUB_REG_SH(A,A1,I) SUB_REG_FETCH(signed short,      HALFWORDS_IN_MIPS_REGS,   A, A1, I)
-#define SUB_REG_SW(A,A1,I) SUB_REG_FETCH(signed int,        WORDS_IN_MIPS_REGS,       A, A1, I)
-#define SUB_REG_SD(A,A1,I) SUB_REG_FETCH(signed long long,  DOUBLEWORDS_IN_MIPS_REGS, A, A1, I)
-
-#define SUB_REG_UB(A,A1,I) SUB_REG_FETCH(unsigned char,     BYTES_IN_MIPS_REGS,       A, A1, I)
-#define SUB_REG_UH(A,A1,I) SUB_REG_FETCH(unsigned short,    HALFWORDS_IN_MIPS_REGS,   A, A1, I)
-#define SUB_REG_UW(A,A1,I) SUB_REG_FETCH(unsigned int,      WORDS_IN_MIPS_REGS,       A, A1, I)
-#define SUB_REG_UD(A,A1,I) SUB_REG_FETCH(unsigned long long,DOUBLEWORDS_IN_MIPS_REGS, A, A1, I)
-
-
+#define SUB_REG_SB(A,A1,I) SUB_REG_FETCH(signed8,  BYTES_IN_MIPS_REGS,       A, A1, I)
+#define SUB_REG_SH(A,A1,I) SUB_REG_FETCH(signed16, HALFWORDS_IN_MIPS_REGS,   A, A1, I)
+#define SUB_REG_SW(A,A1,I) SUB_REG_FETCH(signed32, WORDS_IN_MIPS_REGS,       A, A1, I)
+#define SUB_REG_SD(A,A1,I) SUB_REG_FETCH(signed64, DOUBLEWORDS_IN_MIPS_REGS, A, A1, I)
 
+#define SUB_REG_UB(A,A1,I) SUB_REG_FETCH(unsigned8,  BYTES_IN_MIPS_REGS,       A, A1, I)
+#define SUB_REG_UH(A,A1,I) SUB_REG_FETCH(unsigned16, HALFWORDS_IN_MIPS_REGS,   A, A1, I)
+#define SUB_REG_UW(A,A1,I) SUB_REG_FETCH(unsigned32, WORDS_IN_MIPS_REGS,       A, A1, I)
+#define SUB_REG_UD(A,A1,I) SUB_REG_FETCH(unsigned64, DOUBLEWORDS_IN_MIPS_REGS, A, A1, I)
+  
 #define GPR_SB(R,I) SUB_REG_SB(&registers[R], &registers1[R], I)
 #define GPR_SH(R,I) SUB_REG_SH(&registers[R], &registers1[R], I)
 #define GPR_SW(R,I) SUB_REG_SW(&registers[R], &registers1[R], I)
@@ -769,9 +774,10 @@ interrupt_event (SIM_DESC sd, void *data)
 /*---------------------------------------------------------------------------*/
 
 SIM_DESC
-sim_open (kind,cb,argv)
+sim_open (kind, cb, abfd, argv)
      SIM_OPEN_KIND kind;
      host_callback *cb;
+     struct _bfd *abfd;
      char **argv;
 {
   SIM_DESC sd = &simulator;
@@ -814,6 +820,14 @@ sim_open (kind,cb,argv)
       return 0;
     }
 
+  /* Configure/verify the target byte order and other runtime
+     configuration options */
+  if (sim_config (sd, abfd) != SIM_RC_OK)
+    {
+      sim_module_uninstall (sd);
+      return 0;
+    }
+
   if (sim_post_argv_init (sd) != SIM_RC_OK)
     {
       /* Uninstall the modules to avoid memory leaks,
@@ -1315,10 +1329,6 @@ sim_load (sd,prog,abfd,from_tty)
     return SIM_RC_FAIL;
   sim_analyze_program (sd, prog_bfd);
 
-  /* Configure/verify the target byte order and other runtime
-     configuration options */
-  sim_config (sd, PREFERED_TARGET_BYTE_ORDER(prog_bfd));
-
   /* (re) Write the monitor trap address handlers into the monitor
      (eeprom) address space.  This can only be done once the target
      endianness has been determined. */