* configure: Re-generate.

        * Make-common.in (CSEARCH): Do not include the gdb directory in
        the search path.
        * Make-common.in (SIM_ENDIAN, SIM_HOSTENDIAN, SIM_INLINE,
        SIM_WARNING): Drop, requiring the simulator specific Makefile.in
        to explicitly incorporate these.

        * aclocal.m4 (--enable-sim-alignment); New option. Strongly
        specify the alignment restrictions of the target architecture -
        without this option all alignment restrictions are accomodated.
        (--enable-sim-assert): New option.  Conditionally compile in
        assertion statements.
        (--enable-sim-float): New option. Strongly specify the target's
        floating point support.
        (--enable-sim-hardware): New option.  Specify the hardware devices
        included in the simulation.
        (--enable-sim-packages): New option.  Specify the hardware
        packages included in the simulation.
        (--enable-sim-regparm): New option.  Specify that parameters be
        passed in registers instead of on the stack.
        (--enable-sim-reserved-bits): New option. Specify that reserved
        bits within an instruction are are correctly set.
        (--enable-sim-smp): New option. Specify the level of SMP support
        to be included in the simulator.
        (--enable-sim-stdcall): New option.  Specify an alternative
        function call convention.
        (--enable-sim-xor-endian): New option.  Configure xor-endian
        support used by some targets to implement bi-endian support.

4 files changed, 325 insertions, 67 deletions

diff --git a/sim/common/ChangeLog b/sim/common/ChangeLog
index d5e2b58..0937b30 100644
--- a/sim/common/ChangeLog
+++ b/sim/common/ChangeLog
@@ -1,3 +1,40 @@
+Mon Mar 17 15:10:07 1997  Andrew Cagney  <cagney@kremvax.cygnus.com>
+
+	* configure: Re-generate.
+
+Mon Mar 17 15:04:47 1997  Andrew Cagney  <cagney@kremvax.cygnus.com>
+
+	* Make-common.in (CSEARCH): Do not include the gdb directory in
+ 	the search path.
+
+Mon Mar 17 13:16:26 1997  Andrew Cagney  <cagney@kremvax.cygnus.com>
+
+	* Make-common.in (SIM_ENDIAN, SIM_HOSTENDIAN, SIM_INLINE,
+ 	SIM_WARNING): Drop, requiring the simulator specific Makefile.in
+ 	to explicitly incorporate these.
+
+	* aclocal.m4 (--enable-sim-alignment); New option. Strongly
+ 	specify the alignment restrictions of the target architecture -
+ 	without this option all alignment restrictions are accomodated.
+ 	(--enable-sim-assert): New option.  Conditionally compile in
+ 	assertion statements.
+	(--enable-sim-float): New option. Strongly specify the target's
+ 	floating point support.
+	(--enable-sim-hardware): New option.  Specify the hardware devices
+ 	included in the simulation.
+	(--enable-sim-packages): New option.  Specify the hardware
+ 	packages included in the simulation.
+	(--enable-sim-regparm): New option.  Specify that parameters be
+ 	passed in registers instead of on the stack.
+	(--enable-sim-reserved-bits): New option. Specify that reserved
+ 	bits within an instruction are are correctly set.
+	(--enable-sim-smp): New option. Specify the level of SMP support
+ 	to be included in the simulator.
+	(--enable-sim-stdcall): New option.  Specify an alternative
+ 	function call convention.
+	(--enable-sim-xor-endian): New option.  Configure xor-endian
+ 	support used by some targets to implement bi-endian support.
+	
 Fri Mar 14 19:51:21 1997  Andrew Cagney  <cagney@kremvax.cygnus.com>
 
 	* aclocal.m4 (--enable-sim-hostendian): New option.  Allow the
diff --git a/sim/common/Make-common.in b/sim/common/Make-common.in
index 9964b92..5588b8c 100644
--- a/sim/common/Make-common.in
+++ b/sim/common/Make-common.in
@@ -70,11 +70,8 @@ CFLAGS = @CFLAGS@
 SIM_BSWAP = @sim_bswap@
 SIM_CFLAGS = @sim_cflags@
 SIM_DEBUG = @sim_debug@
-SIM_ENDIAN = @sim_endian@
-SIM_HOSTENDIAN = @sim_hostendian@
-SIM_INLINE = @sim_inline@
 SIM_TRACE = @sim_trace@
-SIM_WARNINGS = @sim_warnings@
+
 
 HDEFINES = @HDEFINES@
 TDEFINES =
@@ -109,11 +106,10 @@ SIM_EXTRA_CLEAN =
 ## COMMON_POST_CONFIG_FRAG
 
 CONFIG_CFLAGS = @DEFS@ $(SIM_CFLAGS) $(SIM_DEBUG) $(SIM_TRACE) $(SIM_BSWAP) \
-  $(SIM_HOSTENDIAN) $(SIM_ENDIAN) $(SIM_INLINE) $(SIM_WARNINGS) \
   $(SIM_EXTRA_CFLAGS) $(HDEFINES) $(TDEFINES)
 CSEARCH = -I. -I$(srcdir) -I../common -I$(srcdir)/../common \
   -I../../include -I$(srcroot)/include \
-  -I../../bfd -I$(srcroot)/bfd -I$(srcroot)/gdb \
+  -I../../bfd -I$(srcroot)/bfd \
   -I../../opcodes -I$(srcroot)/opcodes
 ALL_CFLAGS = $(CONFIG_CFLAGS) $(CSEARCH) $(CFLAGS)
 BUILD_CFLAGS = -g -O $(CSEARCH)
diff --git a/sim/common/aclocal.m4 b/sim/common/aclocal.m4
index 301c5ec..64480a8 100644
--- a/sim/common/aclocal.m4
+++ b/sim/common/aclocal.m4
@@ -46,11 +46,52 @@ AC_PROG_RANLIB
 
 . ${srcdir}/../../bfd/configure.host
 
-dnl Standard simulator options.
+dnl Standard (and optional) simulator options.
 dnl Eventually all simulators will support these.
 dnl Do not add any here that cannot be supported by all simulators.
 dnl Do not add similar but different options to a particular simulator,
 dnl all shall eventually behave the same way.
+dnl
+dnl For optional simulator options, a macro SIM_AC_OPTION_* is defined.
+dnl Simulators that wish to use the relevant option specify the macro
+dnl in the simulator specific configure.in file between the SIM_AC_COMMON
+dnl and SIM_AC_OUTPUT lines.
+
+
+dnl Specify the alignment restrictions of the target architecture.
+dnl Without this option all possible alignment restrictions are accomidated.
+AC_DEFUN(SIM_AC_OPTION_ALIGNMENT,
+[
+AC_ARG_ENABLE(sim-alignment,
+[  --enable-sim-alignment=align		Specify strict or nonstrict alignment.],
+[case "${enableval}" in
+  yes | strict | STRICT)	sim_alignment="-DWITH_ALIGNMENT=STRICT_ALIGNMENT";;
+  no | nonstrict | NONSTRICT)	sim_alignment="-DWITH_ALIGNMENT=NONSTRICT_ALIGNMENT";;
+  0 | default | DEFAULT)	sim_alignment="-DWITH_ALIGNMENT=0";;
+  *)				AC_MSG_ERROR("Unknown value $enableval passed to --enable-sim-alignment"); sim_alignment="";;
+esac
+if test x"$silent" != x"yes" && test x"$sim_alignment" != x""; then
+  echo "Setting alignment flags = $sim_alignment" 6>&1
+fi],[sim_alignment=""])dnl
+AC_SUBST(sim_alignment)
+])dnl
+
+
+dnl Conditionally compile in assertion statements.
+AC_DEFUN(SIM_AC_OPTION_ASSERT,
+[
+AC_ARG_ENABLE(sim-assert,
+[  --enable-sim-assert			Specify whether to perform random assertions.],
+[case "${enableval}" in
+  yes)	sim_assert="-DWITH_ASSERT=1";;
+  no)	sim_assert="-DWITH_ASSERT=0";;
+  *)	AC_MSG_ERROR("--enable-sim-assert does not take a value"); sim_assert="";;
+esac
+if test x"$silent" != x"yes" && test x"$sim_assert" != x""; then
+  echo "Setting assert flags = $sim_assert" 6>&1
+fi],[sim_assert=""])dnl
+AC_SUBST(sim_assert)
+])
 
 
 dnl This is a generic option to enable special byte swapping
@@ -58,7 +99,7 @@ dnl insns on *any* cpu.
 AC_ARG_ENABLE(sim-bswap,
 [  --enable-sim-bswap			Use Host specific BSWAP instruction.],
 [case "${enableval}" in
-  yes)	sim_bswap="-DWITH_BSWAP=1 -DUSE_BSWAP";;
+  yes)	sim_bswap="-DWITH_BSWAP=1 -DUSE_BSWAP=1";;
   no)	sim_bswap="-DWITH_BSWAP=0";;
   *)	AC_MSG_ERROR("--enable-sim-bswap does not take a value"); sim_bswap="";;
 esac
@@ -97,49 +138,6 @@ fi],[sim_debug=""])dnl
 AC_SUBST(sim_debug)
 
 
-dnl --enable-sim-trace is for users of the simulator
-dnl the allowable values are work-in-progress
-AC_ARG_ENABLE(sim-trace,
-[  --enable-sim-trace=opts		Enable tracing flags],
-[case "${enableval}" in
-  yes)	sim_trace="-DTRACE=1";;
-  no)	sim_trace="-DTRACE=0";;
-  *)	sim_trace="-DTRACE='(${enableval})'";;
-esac
-if test x"$silent" != x"yes" && test x"$sim_trace" != x""; then
-  echo "Setting sim trace = $sim_trace" 6>&1
-fi],[sim_trace=""])dnl
-AC_SUBST(sim_trace)
-
-
-dnl These are available to append to as desired.
-sim_link_files=
-sim_link_links=
-
-dnl Create tconfig.h either from simulator's tconfig.in or default one
-dnl in common.
-sim_link_links=tconfig.h
-if test -f ${srcdir}/tconfig.in
-then
-  sim_link_files=tconfig.in
-else
-  sim_link_files=../common/tconfig.in
-fi
-
-# targ-vals.def points to the libc macro description file.
-case "${target}" in
-*-*-*) TARG_VALS_DEF=../common/nltvals.def ;;
-esac
-sim_link_files="${sim_link_files} ${TARG_VALS_DEF}"
-sim_link_links="${sim_link_links} targ-vals.def"
-
-]) dnl End of SIM_AC_COMMON
-
-
-dnl Almost standard simulator options.
-dnl Eventually all simulators will support these.
-
-
 dnl --enable-sim-endian={yes,no,big,little} is for simulators
 dnl that support both big and little endian targets.
 AC_DEFUN(SIM_AC_OPTION_ENDIAN,
@@ -161,6 +159,7 @@ esac
 if test x"$silent" != x"yes" && test x"$sim_endian" != x""; then
   echo "Setting endian flags = $sim_endian" 6>&1
 fi],[sim_endian="${default_sim_endian}"])dnl
+AC_SUBST(sim_endian)
 ])
 
 
@@ -190,6 +189,49 @@ if test "x$cross_compiling" = "xno"; then
 else
   sim_hostendian="-DWITH_HOST_BYTE_ORDER=0"
 fi])dnl
+AC_SUBST(sim_hostendian)
+])
+
+
+AC_DEFUN(SIM_AC_OPTION_FLOAT,
+[
+AC_ARG_ENABLE(sim-float,
+[  --enable-sim-float			Specify whether to use host floating point or simulate.],
+[case "${enableval}" in
+  yes | hard)	sim_float="-DWITH_FLOATING_POINT=HARD_FLOATING_POINT";;
+  no | soft)	sim_float="-DWITH_FLOATING_POINT=SOFT_FLOATING_POINT";;
+  *)		AC_MSG_ERROR("Unknown value $enableval passed to --enable-sim-float"); sim_float="";;
+esac
+if test x"$silent" != x"yes" && test x"$sim_float" != x""; then
+  echo "Setting float flags = $sim_float" 6>&1
+fi],[sim_float=""])dnl
+AC_SUBST(sim_float)
+])
+
+
+AC_DEFUN(SIM_AC_OPTION_HARDWARE,
+[
+AC_ARG_ENABLE(sim-hardware,
+[  --enable-sim-hardware=list		Specify the hardware to be included in the build.],
+[hardware="cpu,memory,nvram,iobus,htab,disk,trace,register,vm,init,core,pal,com,eeprom,opic,glue,phb,ide"
+case "${enableval}" in
+  yes)	;;
+  no)	AC_MSG_ERROR("List of hardware must be specified for --enable-sim-hardware"); hardware="";;
+  ,*)   hardware="${hardware}${enableval}";;
+  *,)   hardware="${enableval}${hardware}";;
+  *)	hardware="${enableval}"'';;
+esac
+sim_hw_src=`echo $hardware | sed -e 's/,/.c hw_/g' -e 's/^/hw_/' -e s'/$/.c/'`
+sim_hw_obj=`echo $sim_hw_src | sed -e 's/\.c/.o/g'`
+if test x"$silent" != x"yes" && test x"$hardware" != x""; then
+  echo "Setting hardware to $sim_hw_src, $sim_hw_obj"
+fi],[hardware="cpu,memory,nvram,iobus,htab,disk,trace,register,vm,init,core,pal,com,eeprom,opic,glue,phb,ide"
+sim_hw_src=`echo $hardware | sed -e 's/,/.c hw_/g' -e 's/^/hw_/' -e s'/$/.c/'`
+sim_hw_obj=`echo $sim_hw_src | sed -e 's/\.c/.o/g'`
+if test x"$silent" != x"yes"; then
+  echo "Setting hardware to $sim_hw_src, $sim_hw_obj"
+fi])dnl
+AC_SUBST(sim_hardware)
 ])
 
 
@@ -231,9 +273,120 @@ fi],[if test x"$GCC" != "x" -a x"${default_sim_inline}" != "x" ; then
 else
   sim_inline=""
 fi])dnl
+AC_SUBST(sim_inline)
+])
+
+
+AC_DEFUN(SIM_AC_OPTION_PACKAGES,
+[
+AC_ARG_ENABLE(sim-packages,
+[  --enable-sim-packages=list		Specify the packages to be included in the build.],
+[packages=disklabel
+case "${enableval}" in
+  yes)	;;
+  no)	AC_MSG_ERROR("List of packages must be specified for --enable-sim-packages"); packages="";;
+  ,*)   packages="${packages}${enableval}";;
+  *,)   packages="${enableval}${packages}";;
+  *)	packages="${enableval}"'';;
+esac
+sim_pk_src=`echo $packages | sed -e 's/,/.c pk_/g' -e 's/^/pk_/' -e 's/$/.c/'`
+sim_pk_obj=`echo $sim_pk_src | sed -e 's/\.c/.o/g'`
+if test x"$silent" != x"yes" && test x"$packages" != x""; then
+  echo "Setting packages to $sim_pk_src, $sim_pk_obj"
+fi],[packages=disklabel
+sim_pk_src=`echo $packages | sed -e 's/,/.c pk_/g' -e 's/^/pk_/' -e 's/$/.c/'`
+sim_pk_obj=`echo $sim_pk_src | sed -e 's/\.c/.o/g'`
+if test x"$silent" != x"yes"; then
+  echo "Setting packages to $sim_pk_src, $sim_pk_obj"
+fi])dnl
+AC_SUBST(sim_packages)
+])
+
+
+AC_DEFUN(SIM_AC_OPTION_REGPARM,
+[
+AC_ARG_ENABLE(sim-regparm,
+[  --enable-sim-regparm=nr-parm		Pass parameters in registers instead of on the stack - x86/GCC specific.],
+[case "${enableval}" in
+  0*|1*|2*|3*|4*|5*|6*|7*|8*|9*) sim_regparm="-DWITH_REGPARM=${enableval}";;
+  no)                            sim_regparm="" ;;
+  yes)                           sim_regparm="-DWITH_REGPARM=3";;
+  *)   AC_MSG_ERROR("Unknown value $enableval for --enable-sim-regparm"); sim_regparm="";;
+esac
+if test x"$silent" != x"yes" && test x"$sim_regparm" != x""; then
+  echo "Setting regparm flags = $sim_regparm" 6>&1
+fi],[sim_regparm=""])dnl
+AC_SUBST(sim_regparm)
+])
+
+
+AC_DEFUN(SIM_AC_OPTION_RESERVED_BITS,
+[
+AC_ARG_ENABLE(sim-reserved-bits,
+[  --enable-sim-reserved-bits		Specify whether to check reserved bits in instruction.],
+[case "${enableval}" in
+  yes)	sim_reserved_bits="-DWITH_RESERVED_BITS=1";;
+  no)	sim_reserved_bits="-DWITH_RESERVED_BITS=0";;
+  *)	AC_MSG_ERROR("--enable-sim-reserved-bits does not take a value"); sim_reserved_bits="";;
+esac
+if test x"$silent" != x"yes" && test x"$sim_reserved_bits" != x""; then
+  echo "Setting reserved flags = $sim_reserved_bits" 6>&1
+fi],[sim_reserved_bits=""])dnl
+AC_SUBST(sim_reserved_bits)
+])
+
+
+AC_DEFUN(SIM_AC_OPTION_SMP,
+[
+AC_ARG_ENABLE(sim-smp,
+[  --enable-sim-smp=n			Specify number of processors to configure for.],
+[case "${enableval}" in
+  yes)	sim_smp="-DWITH_SMP=5" ; sim_igen_smp="-N 5";;
+  no)	sim_smp="-DWITH_SMP=0" ; sim_igen_smp="-N 0";;
+  *)	sim_smp="-DWITH_SMP=$enableval" ; sim_igen_smp="-N $enableval";;
+esac
+if test x"$silent" != x"yes" && test x"$sim_smp" != x""; then
+  echo "Setting smp flags = $sim_smp" 6>&1
+fi],[sim_smp="-DWITH_SMP=5" ; sim_igen_smp="-N 5"
+if test x"$silent" != x"yes"; then
+  echo "Setting smp flags = $sim_smp" 6>&1
+fi])dnl
+AC_SUBST(sim_smp)
 ])
 
 
+AC_DEFUN(SIM_AC_OPTION_STDCALL,
+[
+AC_ARG_ENABLE(sim-stdcall,
+[  --enable-sim-stdcall=type		Use an alternative function call/return mechanism - x86/GCC specific.],
+[case "${enableval}" in
+  no)		sim_stdcall="" ;;
+  std*)		sim_stdcall="-DWITH_STDCALL=1";;
+  yes)		sim_stdcall="-DWITH_STDCALL=1";;
+  *)   AC_MSG_ERROR("Unknown value $enableval for --enable-sim-stdcall"); sim_stdcall="";;
+esac
+if test x"$silent" != x"yes" && test x"$sim_stdcall" != x""; then
+  echo "Setting function call flags = $sim_stdcall" 6>&1
+fi],[sim_stdcall=""])dnl
+AC_SUBST(sim_stdcall)
+])
+
+
+dnl --enable-sim-trace is for users of the simulator
+dnl the allowable values are work-in-progress
+AC_ARG_ENABLE(sim-trace,
+[  --enable-sim-trace=opts		Enable tracing flags],
+[case "${enableval}" in
+  yes)	sim_trace="-DTRACE=1 -DWITH_TRACE=1";;
+  no)	sim_trace="-DTRACE=0 -DWITH_TRACE=0";;
+  *)	sim_trace="-DTRACE='(${enableval})' -DWITH_TRACE='(${enableval})'";;
+esac
+if test x"$silent" != x"yes" && test x"$sim_trace" != x""; then
+  echo "Setting sim trace = $sim_trace" 6>&1
+fi],[sim_trace=""])dnl
+AC_SUBST(sim_trace)
+
+
 dnl --enable-sim-warnings is for developers of the simulator.
 dnl it enables extra GCC specific warnings.
 AC_DEFUN(SIM_AC_OPTION_WARNINGS,
@@ -248,9 +401,47 @@ esac
 if test x"$silent" != x"yes" && test x"$sim_warnings" != x""; then
   echo "Setting warning flags = $sim_warnings" 6>&1
 fi],[sim_warnings=""])dnl
+AC_SUBST(sim_warnings)
 ])
 
 
+AC_DEFUN(SIM_AC_OPTION_XOR_ENDIAN,
+[
+AC_ARG_ENABLE(sim-xor-endian,
+[  --enable-sim-xor-endian=n		Specify number bytes involved in PowerPC XOR bi-endian mode (default 8).],
+[case "${enableval}" in
+  yes)	sim_xor_endian="-DWITH_XOR_ENDIAN=8";;
+  no)	sim_xor_endian="-DWITH_XOR_ENDIAN=0";;
+  *)	sim_xor_endian="-DWITH_XOR_ENDIAN=$enableval";;
+esac
+if test x"$silent" != x"yes" && test x"$sim_xor_endian" != x""; then
+  echo "Setting xor-endian flag = $sim_xor_endian" 6>&1
+fi],[sim_xor_endian=""])dnl
+AC_SUBST(sim_xor_endian)
+])
+
+dnl These are available to append to as desired.
+sim_link_files=
+sim_link_links=
+
+dnl Create tconfig.h either from simulator's tconfig.in or default one
+dnl in common.
+sim_link_links=tconfig.h
+if test -f ${srcdir}/tconfig.in
+then
+  sim_link_files=tconfig.in
+else
+  sim_link_files=../common/tconfig.in
+fi
+
+# targ-vals.def points to the libc macro description file.
+case "${target}" in
+*-*-*) TARG_VALS_DEF=../common/nltvals.def ;;
+esac
+sim_link_files="${sim_link_files} ${TARG_VALS_DEF}"
+sim_link_links="${sim_link_links} targ-vals.def"
+
+]) dnl End of SIM_AC_COMMON
 
 
 dnl Generate the Makefile in a target specific directory.
@@ -262,12 +453,6 @@ dnl the target's fragment at the appropriate points.
 
 AC_DEFUN(SIM_AC_OUTPUT,
 [
-dnl Optional options
-AC_SUBST(sim_endian)
-AC_SUBST(sim_hostendian)
-AC_SUBST(sim_inline)
-AC_SUBST(sim_warnings)
-dnl
 AC_LINK_FILES($sim_link_files, $sim_link_links)
 AC_OUTPUT(Makefile.sim:Makefile.in Make-common.sim:../common/Make-common.in,
 [case "x$CONFIG_FILES" in xMakefile*)
diff --git a/sim/common/configure b/sim/common/configure
index 623a7ae..f6d2a94 100755
--- a/sim/common/configure
+++ b/sim/common/configure
@@ -904,11 +904,16 @@ fi
 
 
 
+
+
+
+
+
 # Check whether --enable-sim-bswap or --disable-sim-bswap was given.
 if test "${enable_sim_bswap+set}" = set; then
   enableval="$enable_sim_bswap"
   case "${enableval}" in
-  yes)	sim_bswap="-DWITH_BSWAP=1 -DUSE_BSWAP";;
+  yes)	sim_bswap="-DWITH_BSWAP=1 -DUSE_BSWAP=1";;
   no)	sim_bswap="-DWITH_BSWAP=0";;
   *)	{ echo "configure: error: "--enable-sim-bswap does not take a value"" 1>&2; exit 1; }; sim_bswap="";;
 esac
@@ -956,13 +961,43 @@ fi
 
 
 
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
 # Check whether --enable-sim-trace or --disable-sim-trace was given.
 if test "${enable_sim_trace+set}" = set; then
   enableval="$enable_sim_trace"
   case "${enableval}" in
-  yes)	sim_trace="-DTRACE=1";;
-  no)	sim_trace="-DTRACE=0";;
-  *)	sim_trace="-DTRACE='(${enableval})'";;
+  yes)	sim_trace="-DTRACE=1 -DWITH_TRACE=1";;
+  no)	sim_trace="-DTRACE=0 -DWITH_TRACE=0";;
+  *)	sim_trace="-DTRACE='(${enableval})' -DWITH_TRACE='(${enableval})'";;
 esac
 if test x"$silent" != x"yes" && test x"$sim_trace" != x""; then
   echo "Setting sim trace = $sim_trace" 6>&1
@@ -973,6 +1008,11 @@ fi
 
 
 
+
+
+
+
+
 sim_link_files=
 sim_link_links=
 
@@ -1037,13 +1077,13 @@ else
   # On the NeXT, cc -E runs the code through the compiler's parser,
   # not just through cpp.
   cat > conftest.$ac_ext <<EOF
-#line 1041 "configure"
+#line 1081 "configure"
 #include "confdefs.h"
 #include <assert.h>
 Syntax Error
 EOF
 ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:1047: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:1087: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
 ac_err=`grep -v '^ *+' conftest.out`
 if test -z "$ac_err"; then
   :
@@ -1052,13 +1092,13 @@ else
   rm -rf conftest*
   CPP="${CC-cc} -E -traditional-cpp"
   cat > conftest.$ac_ext <<EOF
-#line 1056 "configure"
+#line 1096 "configure"
 #include "confdefs.h"
 #include <assert.h>
 Syntax Error
 EOF
 ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:1062: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:1102: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
 ac_err=`grep -v '^ *+' conftest.out`
 if test -z "$ac_err"; then
   :
@@ -1086,12 +1126,12 @@ if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   cat > conftest.$ac_ext <<EOF
-#line 1090 "configure"
+#line 1130 "configure"
 #include "confdefs.h"
 #include <$ac_hdr>
 EOF
 ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:1095: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:1135: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
 ac_err=`grep -v '^ *+' conftest.out`
 if test -z "$ac_err"; then
   rm -rf conftest*