sim: hw: rework configure option & device selection

The sim-hardware configure option allows builders to select a set of
device models to enable.  But this seems like unnecessary overkill:
the existence of individual device models doesn't affect performance
at all as they are only enabled at runtime if the config uses them,
and individually these are all <5KB a piece.  Stripping off a total
of ~50KB from a ~1MB binary doesn't seem useful, and it's extremely
unlikely anyone will ever bother.

So let's simplify the configure/make logic by turning sim-hardware
into a boolean option like many of the other sim options.  Any ports
that have unique device models will declare them in their Makefile
instead of at configure time.  This will allow us to (eventually)
unify the setting into the common dir.

1 files changed, 46 insertions, 90 deletions

diff --git a/sim/bfin/configure b/sim/bfin/configure
index 0453bae..a8a383a 100755
--- a/sim/bfin/configure
+++ b/sim/bfin/configure
@@ -589,6 +589,10 @@ sim_scache
 sim_float
 sim_bitsize
 cgen_breaks
+sim_hw_sockser
+sim_hw_cflags
+SIM_ENABLE_HW_FALSE
+SIM_ENABLE_HW_TRUE
 OBJEXT
 EXEEXT
 ac_ct_CC
@@ -639,9 +643,6 @@ PACKAGE_TARNAME
 PACKAGE_NAME
 PATH_SEPARATOR
 SHELL
-sim_hw
-sim_hw_objs
-sim_hw_cflags
 sim_default_model'
 ac_subst_files=''
 ac_user_opts='
@@ -1271,8 +1272,7 @@ Optional Features:
   --enable-FEATURE[=ARG]  include FEATURE [ARG=yes]
   --enable-sim-default-model=model
                           Specify default model to simulate
-  --enable-sim-hardware=LIST
-                          Specify the hardware to be included in the build.
+  --enable-sim-hardware   Whether to enable hardware/device simulation
 
 Some influential environment variables:
   PKG_CONFIG  path to pkg-config utility
@@ -1824,88 +1824,6 @@ fi
 
 
 
-hardware="cfi core pal glue \
-	bfin_cec \
-	bfin_ctimer \
-	bfin_dma \
-	bfin_dmac \
-	bfin_ebiu_amc \
-	bfin_ebiu_ddrc \
-	bfin_ebiu_sdc \
-	bfin_emac \
-	bfin_eppi \
-	bfin_evt \
-	bfin_gpio \
-	bfin_gpio2 \
-	bfin_gptimer \
-	bfin_jtag \
-	bfin_mmu \
-	bfin_nfc \
-	bfin_otp \
-	bfin_pfmon \
-	bfin_pint \
-	bfin_pll \
-	bfin_ppi \
-	bfin_rtc \
-	bfin_sic \
-	bfin_spi \
-	bfin_trace \
-	bfin_twi \
-	bfin_uart \
-	bfin_uart2 \
-	bfin_wdog \
-	bfin_wp \
-	eth_phy \
-"
-sim_hw_cflags="-DWITH_HW=1"
-sim_hw="$hardware"
-sim_hw_objs="\$(SIM_COMMON_HW_OBJS) `echo $sim_hw | sed -e 's/\([^ ][^ ]*\)/dv-\1.o/g'`"
-
-# Check whether --enable-sim-hardware was given.
-if test "${enable_sim_hardware+set}" = set; then :
-  enableval=$enable_sim_hardware;
-else
-  enable_sim_hardware="yes"
-fi
-
-case ${enable_sim_hardware} in
-  yes|no) ;;
-  ,*) hardware="${hardware} `echo ${enableval} | sed -e 's/,/ /'`";;
-  *,) hardware="`echo ${enableval} | sed -e 's/,/ /'` ${hardware}";;
-  *)  hardware="`echo ${enableval} | sed -e 's/,/ /'`"'';;
-esac
-
-if test "$enable_sim_hardware" = no; then
-  sim_hw_objs=
-  sim_hw_cflags="-DWITH_HW=0"
-  sim_hw=
-else
-  sim_hw_cflags="-DWITH_HW=1"
-  # remove duplicates
-  sim_hw=""
-  sim_hw_objs="\$(SIM_COMMON_HW_OBJS)"
-  for i in $hardware ; do
-    case " $sim_hw " in
-      *" $i "*) ;;
-      *) sim_hw="$sim_hw $i" ; sim_hw_objs="$sim_hw_objs dv-$i.o";;
-    esac
-  done
-  # mingw does not support sockser
-  case ${host} in
-    *mingw*) ;;
-    *) # TODO: We don't add dv-sockser to sim_hw as it is not a "real" device
-       # that you instatiate.  Instead, other code will call into it directly.
-       # At some point, we should convert it over.
-       sim_hw_objs="$sim_hw_objs dv-sockser.o"
-       sim_hw_cflags="$sim_hw_cflags -DHAVE_DV_SOCKSER"
-       ;;
-  esac
-  if test x"$silent" != x"yes"; then
-    echo "Setting hardware to $sim_hw_cflags, $sim_hw, $sim_hw_objs"
-  fi
-fi
-
-
 
 
 
@@ -2960,6 +2878,47 @@ fi
 
 
 
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for sim hardware settings" >&5
+$as_echo_n "checking for sim hardware settings... " >&6; }
+# Check whether --enable-sim-hardware was given.
+if test "${enable_sim_hardware+set}" = set; then :
+  enableval=$enable_sim_hardware;
+else
+  enable_sim_hardware="yes"
+fi
+
+sim_hw_sockser=
+if test "$enable_sim_hardware" = no; then
+  sim_hw_cflags="-DWITH_HW=0"
+elif test "$enable_sim_hardware" = yes; then
+  sim_hw_cflags="-DWITH_HW=1"
+  # mingw does not support sockser
+  case ${host} in
+    *mingw*) ;;
+    *) # TODO: We don't add dv-sockser to sim_hw as it is not a "real" device
+       # that you instatiate.  Instead, other code will call into it directly.
+       # At some point, we should convert it over.
+       sim_hw_sockser="dv-sockser.o"
+       sim_hw_cflags="$sim_hw_cflags -DHAVE_DV_SOCKSER"
+       ;;
+  esac
+else
+  as_fn_error $? "unknown argument \"$enable_sim_hardware\"" "$LINENO" 5
+fi
+if test "$enable_sim_hardware" = "yes"; then
+  SIM_ENABLE_HW_TRUE=
+  SIM_ENABLE_HW_FALSE='#'
+else
+  SIM_ENABLE_HW_TRUE='#'
+  SIM_ENABLE_HW_FALSE=
+fi
+
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: ${enable_sim_hardware}" >&5
+$as_echo "${enable_sim_hardware}" >&6; }
+
+
+
 
 cgen_breaks=""
 if grep CGEN_MAINT $srcdir/Makefile.in >/dev/null; then
@@ -2983,9 +2942,6 @@ ac_config_commands="$ac_config_commands stamp-h"
 
 
 
-
-
-
 cat >confcache <<\_ACEOF
 # This file is a shell script that caches the results of configure
 # tests run on this system so they can be shared between configure