sim: arm: convert to nrun

A lot of cpu state is stored in global variables, as is memory handling.
The sim_size support needs unwinding at some point.  But at least this
is an improvement on the status quo.

4 files changed, 160 insertions, 153 deletions

diff --git a/sim/arm/ChangeLog b/sim/arm/ChangeLog
index 99a5d50..d12df6c 100644
--- a/sim/arm/ChangeLog
+++ b/sim/arm/ChangeLog
@@ -1,5 +1,25 @@
 2015-03-30  Mike Frysinger  <vapier@gentoo.org>
 
+	* Makefile.in (SIM_RUN_OBJS): Delete.
+	(SIM_EXTRA_CFLAGS): Delete -DSIM_TARGET_SWITCHES and
+	-DSIM_USE_DEPRECATED_RUN_FRONTEND.
+	(SIM_OBJS): Change to $(SIM_NEW_COMMON_OBJS).
+	* sim-main.h: New file.
+	* wrapper.c: Delete armdefs.h, sim-utils.h, and run-sim.h includes.
+	Add sim-main.h and sim-options.h includes.
+	(sim_callback, mem_size, trace): Add TODO comments.
+	(state): Delete static and add TODO comment.
+	(sim_kind, myname, big_endian): Delete.
+	(init): Change big_endian to CURRENT_TARGET_BYTE_ORDER check.
+	(sim_size, sim_trace, sim_info, sim_target_display_usage, sim_load,
+	sim_do_command, sim_set_callbacks, sim_complete_command): Delete.
+	(sim_target_parse_command_line): Mark static.
+	(free_state): New function.
+	(sim_open): Rewrite to use new common logic.
+	(sim_close): Delete body.
+
+2015-03-30  Mike Frysinger  <vapier@gentoo.org>
+
 	* Makefile.in (SIM_EXTRA_CFLAGS): Delete -DNEED_UI_LOOP_HOOK.
 	* interp.c [NEED_UI_LOOP_HOOK] (UI_LOOP_POLL_INTERVAL,
 	ui_loop_hook_counter, deprecated_ui_loop_hook): Delete.
diff --git a/sim/arm/Makefile.in b/sim/arm/Makefile.in
index 1b2ed6a..241911b 100644
--- a/sim/arm/Makefile.in
+++ b/sim/arm/Makefile.in
@@ -17,14 +17,15 @@
 
 ## COMMON_PRE_CONFIG_FRAG
 
-SIM_EXTRA_CFLAGS = -DMODET -DSIM_TARGET_SWITCHES \
-	-DSIM_USE_DEPRECATED_RUN_FRONTEND
-
-# Use the deprecated run frontend until we migrate to nrun.o
-SIM_RUN_OBJS = run.o
-
-SIM_OBJS = armemu26.o armemu32.o arminit.o armos.o armsupp.o \
-	armvirt.o bag.o thumbemu.o wrapper.o sim-load.o \
+SIM_EXTRA_CFLAGS = -DMODET
+
+SIM_OBJS = \
+	$(SIM_NEW_COMMON_OBJS) \
+	sim-cpu.o \
+	sim-engine.o \
+	sim-hload.o \
+	armemu26.o armemu32.o arminit.o armos.o armsupp.o \
+	armvirt.o bag.o thumbemu.o wrapper.o \
 	armcopro.o maverick.o iwmmxt.o
 
 ## COMMON_POST_CONFIG_FRAG
diff --git a/sim/arm/sim-main.h b/sim/arm/sim-main.h
new file mode 100644
index 0000000..d020972
--- /dev/null
+++ b/sim/arm/sim-main.h
@@ -0,0 +1,56 @@
+/* Simulation code for the ARM processor.
+   Copyright (C) 2009-2015 Free Software Foundation, Inc.
+
+   This file is part of simulators.
+
+   This program is free software; you can redistribute it and/or modify
+   it under the terms of the GNU General Public License as published by
+   the Free Software Foundation; either version 3 of the License, or
+   (at your option) any later version.
+
+   This program is distributed in the hope that it will be useful,
+   but WITHOUT ANY WARRANTY; without even the implied warranty of
+   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+   GNU General Public License for more details.
+
+   You should have received a copy of the GNU General Public License
+   along with this program.  If not, see <http://www.gnu.org/licenses/>.  */
+
+#ifndef SIM_MAIN_H
+#define SIM_MAIN_H
+
+#include "sim-basics.h"
+
+typedef address_word sim_cia;
+
+typedef struct _sim_cpu SIM_CPU;
+
+#include "sim-base.h"
+#include "bfd.h"
+
+#undef BIT
+#include "armdefs.h"
+
+extern struct ARMul_State *state;
+
+#define CIA_GET(cpu)     PC
+#define CIA_SET(cpu,val) ARMul_SetPC (state, (val))
+
+struct _sim_cpu {
+
+  sim_cpu_base base;
+};
+
+struct sim_state {
+
+  sim_cpu *cpu[MAX_NR_PROCESSORS];
+#if (WITH_SMP)
+#define STATE_CPU(sd,n) ((sd)->cpu[n])
+#else
+#define STATE_CPU(sd,n) ((sd)->cpu[0])
+#endif
+
+  sim_state_base base;
+};
+
+#endif
diff --git a/sim/arm/wrapper.c b/sim/arm/wrapper.c
index c1b5321..dd3cfe2 100644
--- a/sim/arm/wrapper.c
+++ b/sim/arm/wrapper.c
@@ -28,37 +28,31 @@
 #include <signal.h>
 #include "gdb/callback.h"
 #include "gdb/remote-sim.h"
-#include "armdefs.h"
+#include "sim-main.h"
+#include "sim-options.h"
 #include "armemu.h"
 #include "dbg_rdi.h"
 #include "ansidecl.h"
-#include "sim-utils.h"
-#include "run-sim.h"
 #include "gdb/sim-arm.h"
 #include "gdb/signals.h"
 #include "libiberty.h"
 #include "iwmmxt.h"
 
+/* TODO: This should get pulled from the SIM_DESC.  */
 host_callback *sim_callback;
 
-static struct ARMul_State *state;
-
-/* Who is using the simulator.  */
-static SIM_OPEN_KIND sim_kind;
-
-/* argv[0] */
-static char *myname;
+/* TODO: This should get merged into sim_cpu.  */
+struct ARMul_State *state;
 
 /* Memory size in bytes.  */
+/* TODO: Memory should be converted to the common memory module.  */
 static int mem_size = (1 << 21);
 
-/* Non-zero to set big endian mode.  */
-static int big_endian;
-
 int stop_simulator;
 
 #include "dis-asm.h"
 
+/* TODO: Tracing should be converted to common tracing module.  */
 int trace = 0;
 int disas = 0;
 int trace_funcs = 0;
@@ -146,7 +140,7 @@ init (void)
     {
       ARMul_EmulateInit ();
       state = ARMul_NewState ();
-      state->bigendSig = (big_endian ? HIGH : LOW);
+      state->bigendSig = (CURRENT_TARGET_BYTE_ORDER == BIG_ENDIAN ? HIGH : LOW);
       ARMul_MemoryInit (state, mem_size);
       ARMul_OSInit (state);
       state->verbose = 0;
@@ -154,16 +148,6 @@ init (void)
     }
 }
 
-/* Set the memory size to SIZE bytes.
-   Must be called before initializing simulator.  */
-/* FIXME: Rename to sim_set_mem_size.  */
-
-void
-sim_size (int size)
-{
-  mem_size = size;
-}
-
 void
 ARMul_ConsolePrint (ARMul_State * state,
 		    const char * format,
@@ -220,14 +204,6 @@ sim_read (SIM_DESC sd ATTRIBUTE_UNUSED,
 }
 
 int
-sim_trace (SIM_DESC sd ATTRIBUTE_UNUSED)
-{
-  trace = 1;
-  sim_resume (sd, 0, 0);
-  return 1;
-}
-
-int
 sim_stop (SIM_DESC sd ATTRIBUTE_UNUSED)
 {
   state->Emulate = STOP;
@@ -437,12 +413,6 @@ sim_create_inferior (SIM_DESC sd ATTRIBUTE_UNUSED,
   return SIM_RC_OK;
 }
 
-void
-sim_info (SIM_DESC sd ATTRIBUTE_UNUSED,
-	  int verbose ATTRIBUTE_UNUSED)
-{
-}
-
 static int
 frommem (struct ARMul_State *state, unsigned char *memory)
 {
@@ -728,7 +698,7 @@ static swi_options options[] =
   };
 
 
-int
+static int
 sim_target_parse_command_line (int argc, char ** argv)
 {
   int i;
@@ -830,88 +800,89 @@ sim_target_parse_arg_array (char ** argv)
   sim_target_parse_command_line (i, argv);
 }
 
-void
-sim_target_display_usage (int help)
+static void
+free_state (SIM_DESC sd)
 {
-  FILE *stream = help ? stdout : stderr;
-
-  fprintf (stream, "%s=<list>  Comma seperated list of SWI protocols to supoport.\n\
-                This list can contain: NONE, DEMON, ANGEL, REDBOOT and/or ALL.\n",
-	   SWI_SWITCH);
-  fprintf (stream, "-d\t\tEnable disassembly of instructions during tracing.\n");
-  fprintf (stream, "-z\t\tTrace entering and leaving functions.\n\n");
+  if (STATE_MODULES (sd) != NULL)
+    sim_module_uninstall (sd);
+  sim_cpu_free_all (sd);
+  sim_state_free (sd);
 }
 
 SIM_DESC
-sim_open (SIM_OPEN_KIND   kind,
-	  host_callback * ptr,
-	  struct bfd *    abfd,
-	  char **         argv)
+sim_open (SIM_OPEN_KIND kind,
+	  host_callback *cb,
+	  struct bfd *abfd,
+	  char **argv)
 {
-  sim_kind = kind;
+  SIM_DESC sd = sim_state_alloc (kind, cb);
+  SIM_ASSERT (STATE_MAGIC (sd) == SIM_MAGIC_NUMBER);
 
-  if (myname)
-    free (myname);
-  myname = (char *) xstrdup (argv[0]);
+  /* The cpu data is kept in a separately allocated chunk of memory.  */
+  if (sim_cpu_alloc_all (sd, 1, /*cgen_cpu_max_extra_bytes ()*/0) != SIM_RC_OK)
+    {
+      free_state (sd);
+      return 0;
+    }
 
-  sim_callback = ptr;
+  if (sim_pre_argv_init (sd, argv[0]) != SIM_RC_OK)
+    {
+      free_state (sd);
+      return 0;
+    }
 
-#ifdef SIM_TARGET_SWITCHES
-  sim_target_parse_arg_array (argv);
-#endif
-  
-  /* Decide upon the endian-ness of the processor.
-     If we can, get the information from the bfd itself.
-     Otherwise look to see if we have been given a command
-     line switch that tells us.  Otherwise default to little endian.  */
-  if (abfd != NULL)
-    big_endian = bfd_big_endian (abfd);
-  else if (argv[1] != NULL)
+  /* getopt will print the error message so we just have to exit if this fails.
+     FIXME: Hmmm...  in the case of gdb we need getopt to call
+     print_filtered.  */
+  if (sim_parse_args (sd, argv) != SIM_RC_OK)
     {
-      int i;
+      free_state (sd);
+      return 0;
+    }
 
-      /* Scan for endian-ness and memory-size switches.  */
-      for (i = 0; (argv[i] != NULL) && (argv[i][0] != 0); i++)
-	if (argv[i][0] == '-' && argv[i][1] == 'E')
-	  {
-	    char c;
+  /* Check for/establish the a reference program image.  */
+  if (sim_analyze_program (sd,
+			   (STATE_PROG_ARGV (sd) != NULL
+			    ? *STATE_PROG_ARGV (sd)
+			    : NULL), abfd) != SIM_RC_OK)
+    {
+      free_state (sd);
+      return 0;
+    }
 
-	    if ((c = argv[i][2]) == 0)
-	      {
-		++i;
-		c = argv[i][0];
-	      }
+  /* Configure/verify the target byte order and other runtime
+     configuration options.  */
+  if (sim_config (sd) != SIM_RC_OK)
+    {
+      sim_module_uninstall (sd);
+      return 0;
+    }
 
-	    switch (c)
-	      {
-	      case 0:
-		sim_callback->printf_filtered
-		  (sim_callback, "No argument to -E option provided\n");
-		break;
+  if (sim_post_argv_init (sd) != SIM_RC_OK)
+    {
+      /* Uninstall the modules to avoid memory leaks,
+	 file descriptor leaks, etc.  */
+      sim_module_uninstall (sd);
+      return 0;
+    }
 
-	      case 'b':
-	      case 'B':
-		big_endian = 1;
-		break;
+  sim_callback = cb;
 
-	      case 'l':
-	      case 'L':
-		big_endian = 0;
-		break;
+  sim_target_parse_arg_array (argv);
 
-	      default:
-		sim_callback->printf_filtered
-		  (sim_callback, "Unrecognised argument to -E option\n");
-		break;
-	      }
-	  }
-	else if (argv[i][0] == '-' && argv[i][1] == 'm')
+  if (argv[1] != NULL)
+    {
+      int i;
+
+      /* Scan for memory-size switches.  */
+      for (i = 0; (argv[i] != NULL) && (argv[i][0] != 0); i++)
+	if (argv[i][0] == '-' && argv[i][1] == 'm')
 	  {
 	    if (argv[i][2] != '\0')
-	      sim_size (atoi (&argv[i][2]));
+	      mem_size = atoi (&argv[i][2]);
 	    else if (argv[i + 1] != NULL)
 	      {
-		sim_size (atoi (argv[i + 1]));
+		mem_size = atoi (argv[i + 1]);
 		i++;
 	      }
 	    else
@@ -924,34 +895,14 @@ sim_open (SIM_OPEN_KIND   kind,
 	  }
     }
 
-  return (SIM_DESC) 1;
+  return sd;
 }
 
 void
 sim_close (SIM_DESC sd ATTRIBUTE_UNUSED,
 	   int quitting ATTRIBUTE_UNUSED)
 {
-  if (myname)
-    free (myname);
-  myname = NULL;
-}
-
-SIM_RC
-sim_load (SIM_DESC sd,
-	  const char *prog,
-	  bfd *abfd,
-	  int from_tty ATTRIBUTE_UNUSED)
-{
-  bfd *prog_bfd;
-
-  prog_bfd = sim_load_file (sd, myname, sim_callback, prog, abfd,
-			    sim_kind == SIM_OPEN_DEBUG, 0, sim_write);
-  if (prog_bfd == NULL)
-    return SIM_RC_FAIL;
-  ARMul_SetPC (state, bfd_get_start_address (prog_bfd));
-  if (abfd == NULL)
-    bfd_close (prog_bfd);
-  return SIM_RC_OK;
+  /* Nothing to do.  */
 }
 
 void
@@ -981,24 +932,3 @@ sim_stop_reason (SIM_DESC sd ATTRIBUTE_UNUSED,
 	*sigrc = 0;
     }
 }
-
-void
-sim_do_command (SIM_DESC sd ATTRIBUTE_UNUSED,
-		const char *cmd ATTRIBUTE_UNUSED)
-{  
-  (*sim_callback->printf_filtered)
-    (sim_callback,
-     "This simulator does not accept any commands.\n");
-}
-
-void
-sim_set_callbacks (host_callback *ptr)
-{
-  sim_callback = ptr;
-}
-
-char **
-sim_complete_command (SIM_DESC sd, const char *text, const char *word)
-{
-  return NULL;
-}