* Makefile.in (Makefile): Just rebuild Makefile when running

	config.status.
	(config.h, stamp-h): New targets.
	* configure.in: Call AC_CONFIG_HEADER and AC_CANONICAL_SYSTEM
	earlier.  Don't bother to call AC_ARG_PROGRAM.  Touch stamp-h when
	rebuilding config.h.
	* configure: Rebuild.

3 files changed, 136 insertions, 162 deletions

diff --git a/opcodes/ChangeLog b/opcodes/ChangeLog
index 60ce6f7..c7e22ca 100644
--- a/opcodes/ChangeLog
+++ b/opcodes/ChangeLog
@@ -1,5 +1,13 @@
 Fri Sep  8 01:07:38 1995  Ian Lance Taylor  <ian@cygnus.com>
 
+	* Makefile.in (Makefile): Just rebuild Makefile when running
+	config.status.
+	(config.h, stamp-h): New targets.
+	* configure.in: Call AC_CONFIG_HEADER and AC_CANONICAL_SYSTEM
+	earlier.  Don't bother to call AC_ARG_PROGRAM.  Touch stamp-h when
+	rebuilding config.h.
+	* configure: Rebuild.
+
 	* mips-opc.c: Change unaligned loads and stores with "t,A"
 	operands to use "t,A(b)".
 
diff --git a/opcodes/Makefile.in b/opcodes/Makefile.in
index a9be29c..e00011c 100644
--- a/opcodes/Makefile.in
+++ b/opcodes/Makefile.in
@@ -188,8 +188,12 @@ install:
 	$(INSTALL_DATA) $(TARGETLIB) $(libdir)/libopcodes.a
 	$(RANLIB) $(libdir)/libopcodes.a
 
-Makefile: $(srcdir)/Makefile.in config.status
-	$(SHELL) config.status
+Makefile: Makefile.in config.status
+	CONFIG_FILES=Makefile CONFIG_HEADERS= $(SHELL) ./config.status
+
+config.h: stamp-h ; @true
+stamp-h: config.in config.status
+	CONFIG_FILES= CONFIG_HEADERS=config.h:config.in $(SHELL) ./config.status
 
 config.status : configure $(srcdir)/../bfd/configure.host $(srcdir)/../bfd/config.bfd
 	$(SHELL) config.status --recheck
diff --git a/opcodes/configure b/opcodes/configure
index 8e9d0ea..a383900 100755
--- a/opcodes/configure
+++ b/opcodes/configure
@@ -429,6 +429,117 @@ if test -n "$enableval"; then
 esac
 fi
 
+
+
+ac_aux_dir=
+for ac_dir in `cd $srcdir/..;pwd` $srcdir/`cd $srcdir/..;pwd`; do
+  if test -f $ac_dir/install-sh; then
+    ac_aux_dir=$ac_dir
+    ac_install_sh="$ac_aux_dir/install-sh -c"
+    break
+  elif test -f $ac_dir/install.sh; then
+    ac_aux_dir=$ac_dir
+    ac_install_sh="$ac_aux_dir/install.sh -c"
+    break
+  fi
+done
+if test -z "$ac_aux_dir"; then
+  { echo "configure: error: can not find install-sh or install.sh in `cd $srcdir/..;pwd` $srcdir/`cd $srcdir/..;pwd`" 1>&2; exit 1; }
+fi
+ac_config_guess=$ac_aux_dir/config.guess
+ac_config_sub=$ac_aux_dir/config.sub
+ac_configure=$ac_aux_dir/configure # This should be Cygnus configure.
+
+
+# Do some error checking and defaulting for the host and target type.
+# The inputs are:
+#    configure --host=HOST --target=TARGET --build=BUILD NONOPT
+#
+# The rules are:
+# 1. You are not allowed to specify --host, --target, and nonopt at the
+#    same time. 
+# 2. Host defaults to nonopt.
+# 3. If nonopt is not specified, then host defaults to the current host,
+#    as determined by config.guess.
+# 4. Target and build default to nonopt.
+# 5. If nonopt is not specified, then target and build default to host.
+
+# The aliases save the names the user supplied, while $host etc.
+# will get canonicalized.
+case $host---$target---$nonopt in
+NONE---*---* | *---NONE---* | *---*---NONE) ;;
+*) { echo "configure: error: can only configure for one host and one target at a time" 1>&2; exit 1; } ;;
+esac
+
+
+# Make sure we can run config.sub.
+if $ac_config_sub sun4 >/dev/null 2>&1; then :
+else { echo "configure: error: can not run $ac_config_sub" 1>&2; exit 1; }
+fi
+
+echo $ac_n "checking host system type""... $ac_c" 1>&6
+
+host_alias=$host
+case "$host_alias" in
+NONE)
+  case $nonopt in
+  NONE)
+    if host_alias=`$ac_config_guess`; then :
+    else { echo "configure: error: can not guess host type; you must specify one" 1>&2; exit 1; }
+    fi ;;
+  *) host_alias=$nonopt ;;
+  esac ;;
+esac
+
+host=`$ac_config_sub $host_alias`
+host_cpu=`echo $host | sed 's/^\(.*\)-\(.*\)-\(.*\)$/\1/'`
+host_vendor=`echo $host | sed 's/^\(.*\)-\(.*\)-\(.*\)$/\2/'`
+host_os=`echo $host | sed 's/^\(.*\)-\(.*\)-\(.*\)$/\3/'`
+echo "$ac_t""$host" 1>&6
+
+echo $ac_n "checking target system type""... $ac_c" 1>&6
+
+target_alias=$target
+case "$target_alias" in
+NONE)
+  case $nonopt in
+  NONE) target_alias=$host_alias ;;
+  *) target_alias=$nonopt ;;
+  esac ;;
+esac
+
+target=`$ac_config_sub $target_alias`
+target_cpu=`echo $target | sed 's/^\(.*\)-\(.*\)-\(.*\)$/\1/'`
+target_vendor=`echo $target | sed 's/^\(.*\)-\(.*\)-\(.*\)$/\2/'`
+target_os=`echo $target | sed 's/^\(.*\)-\(.*\)-\(.*\)$/\3/'`
+echo "$ac_t""$target" 1>&6
+
+echo $ac_n "checking build system type""... $ac_c" 1>&6
+
+build_alias=$build
+case "$build_alias" in
+NONE)
+  case $nonopt in
+  NONE) build_alias=$host_alias ;;
+  *) build_alias=$nonopt ;;
+  esac ;;
+esac
+
+build=`$ac_config_sub $build_alias`
+build_cpu=`echo $build | sed 's/^\(.*\)-\(.*\)-\(.*\)$/\1/'`
+build_vendor=`echo $build | sed 's/^\(.*\)-\(.*\)-\(.*\)$/\2/'`
+build_os=`echo $build | sed 's/^\(.*\)-\(.*\)-\(.*\)$/\3/'`
+echo "$ac_t""$build" 1>&6
+
+test "$host_alias" != "$target_alias" &&
+  test "$program_prefix$program_suffix$program_transform_name" = \
+    NONENONEs,x,x, &&
+  program_prefix=${target_alias}-
+
+if test -z "$target" ; then
+    { echo "configure: error: Unrecognized target system type; please check config.sub." 1>&2; exit 1; }
+fi
+
 # host-specific stuff:
 
 . ${srcdir}/../bfd/configure.host
@@ -491,25 +602,6 @@ else
   echo "$ac_t""no" 1>&6
 fi
 
-ac_aux_dir=
-for ac_dir in $srcdir $srcdir/.. $srcdir/../..; do
-  if test -f $ac_dir/install-sh; then
-    ac_aux_dir=$ac_dir
-    ac_install_sh="$ac_aux_dir/install-sh -c"
-    break
-  elif test -f $ac_dir/install.sh; then
-    ac_aux_dir=$ac_dir
-    ac_install_sh="$ac_aux_dir/install.sh -c"
-    break
-  fi
-done
-if test -z "$ac_aux_dir"; then
-  { echo "configure: error: can not find install-sh or install.sh in $srcdir $srcdir/.. $srcdir/../.." 1>&2; exit 1; }
-fi
-ac_config_guess=$ac_aux_dir/config.guess
-ac_config_sub=$ac_aux_dir/config.sub
-ac_configure=$ac_aux_dir/configure # This should be Cygnus configure.
-
 # Find a good install program.  We prefer a C program (faster),
 # so one script is as good as another.  But avoid the broken or
 # incompatible versions:
@@ -578,7 +670,7 @@ else
   # On the NeXT, cc -E runs the code through the compiler's parser,
   # not just through cpp.
   cat > conftest.$ac_ext <<EOF
-#line 582 "configure"
+#line 674 "configure"
 #include "confdefs.h"
 #include <assert.h>
 Syntax Error
@@ -592,7 +684,7 @@ else
   rm -rf conftest*
   CPP="${CC-cc} -E -traditional-cpp"
   cat > conftest.$ac_ext <<EOF
-#line 596 "configure"
+#line 688 "configure"
 #include "confdefs.h"
 #include <assert.h>
 Syntax Error
@@ -625,7 +717,7 @@ if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   cat > conftest.$ac_ext <<EOF
-#line 629 "configure"
+#line 721 "configure"
 #include "confdefs.h"
 #include <$ac_hdr>
 EOF
@@ -654,135 +746,6 @@ fi
 done
 
 
-ac_aux_dir=
-for ac_dir in `cd $srcdir/..;pwd` $srcdir/`cd $srcdir/..;pwd`; do
-  if test -f $ac_dir/install-sh; then
-    ac_aux_dir=$ac_dir
-    ac_install_sh="$ac_aux_dir/install-sh -c"
-    break
-  elif test -f $ac_dir/install.sh; then
-    ac_aux_dir=$ac_dir
-    ac_install_sh="$ac_aux_dir/install.sh -c"
-    break
-  fi
-done
-if test -z "$ac_aux_dir"; then
-  { echo "configure: error: can not find install-sh or install.sh in `cd $srcdir/..;pwd` $srcdir/`cd $srcdir/..;pwd`" 1>&2; exit 1; }
-fi
-ac_config_guess=$ac_aux_dir/config.guess
-ac_config_sub=$ac_aux_dir/config.sub
-ac_configure=$ac_aux_dir/configure # This should be Cygnus configure.
-
-
-# Do some error checking and defaulting for the host and target type.
-# The inputs are:
-#    configure --host=HOST --target=TARGET --build=BUILD NONOPT
-#
-# The rules are:
-# 1. You are not allowed to specify --host, --target, and nonopt at the
-#    same time. 
-# 2. Host defaults to nonopt.
-# 3. If nonopt is not specified, then host defaults to the current host,
-#    as determined by config.guess.
-# 4. Target and build default to nonopt.
-# 5. If nonopt is not specified, then target and build default to host.
-
-# The aliases save the names the user supplied, while $host etc.
-# will get canonicalized.
-case $host---$target---$nonopt in
-NONE---*---* | *---NONE---* | *---*---NONE) ;;
-*) { echo "configure: error: can only configure for one host and one target at a time" 1>&2; exit 1; } ;;
-esac
-
-
-# Make sure we can run config.sub.
-if $ac_config_sub sun4 >/dev/null 2>&1; then :
-else { echo "configure: error: can not run $ac_config_sub" 1>&2; exit 1; }
-fi
-
-echo $ac_n "checking host system type""... $ac_c" 1>&6
-
-host_alias=$host
-case "$host_alias" in
-NONE)
-  case $nonopt in
-  NONE)
-    if host_alias=`$ac_config_guess`; then :
-    else { echo "configure: error: can not guess host type; you must specify one" 1>&2; exit 1; }
-    fi ;;
-  *) host_alias=$nonopt ;;
-  esac ;;
-esac
-
-host=`$ac_config_sub $host_alias`
-host_cpu=`echo $host | sed 's/^\(.*\)-\(.*\)-\(.*\)$/\1/'`
-host_vendor=`echo $host | sed 's/^\(.*\)-\(.*\)-\(.*\)$/\2/'`
-host_os=`echo $host | sed 's/^\(.*\)-\(.*\)-\(.*\)$/\3/'`
-echo "$ac_t""$host" 1>&6
-
-echo $ac_n "checking target system type""... $ac_c" 1>&6
-
-target_alias=$target
-case "$target_alias" in
-NONE)
-  case $nonopt in
-  NONE) target_alias=$host_alias ;;
-  *) target_alias=$nonopt ;;
-  esac ;;
-esac
-
-target=`$ac_config_sub $target_alias`
-target_cpu=`echo $target | sed 's/^\(.*\)-\(.*\)-\(.*\)$/\1/'`
-target_vendor=`echo $target | sed 's/^\(.*\)-\(.*\)-\(.*\)$/\2/'`
-target_os=`echo $target | sed 's/^\(.*\)-\(.*\)-\(.*\)$/\3/'`
-echo "$ac_t""$target" 1>&6
-
-echo $ac_n "checking build system type""... $ac_c" 1>&6
-
-build_alias=$build
-case "$build_alias" in
-NONE)
-  case $nonopt in
-  NONE) build_alias=$host_alias ;;
-  *) build_alias=$nonopt ;;
-  esac ;;
-esac
-
-build=`$ac_config_sub $build_alias`
-build_cpu=`echo $build | sed 's/^\(.*\)-\(.*\)-\(.*\)$/\1/'`
-build_vendor=`echo $build | sed 's/^\(.*\)-\(.*\)-\(.*\)$/\2/'`
-build_os=`echo $build | sed 's/^\(.*\)-\(.*\)-\(.*\)$/\3/'`
-echo "$ac_t""$build" 1>&6
-
-test "$host_alias" != "$target_alias" &&
-  test "$program_prefix$program_suffix$program_transform_name" = \
-    NONENONEs,x,x, &&
-  program_prefix=${target_alias}-
-
-if test -z "$target" ; then
-    { echo "configure: error: Unrecognized target system type; please check config.sub." 1>&2; exit 1; }
-fi
-if test -z "$host" ; then
-    { echo "configure: error: Unrecognized host system type; please check config.sub." 1>&2; exit 1; }
-fi
-if test "$program_transform_name" = s,x,x,; then
-  program_transform_name=
-else
-  # Double any \ or $.
-  echo 's,\\,\\\\,g; s,\$,$$,g' > conftestsed
-  program_transform_name="`echo $program_transform_name|sed -f conftestsed`"
-  rm -f conftestsed
-fi
-test "$program_prefix" != NONE &&
-  program_transform_name="s,^,${program_prefix},; $program_transform_name"
-# Use a double $ so make ignores it.
-test "$program_suffix" != NONE &&
-  program_transform_name="s,\$\$,${program_suffix},; $program_transform_name"
-
-# sed with no file args requires a program.
-test "$program_transform_name" = "" && program_transform_name="s,x,x,"
-
-
 # target-specific stuff:
 
 # Canonicalize the secondary target names.
@@ -885,7 +848,6 @@ fi
 
 
 
-
 trap '' 1 2 15
 cat > confcache <<\EOF
 # This file is a shell script that caches the results of configure
@@ -989,13 +951,6 @@ s%@LIBS@%$LIBS%g
 s%@exec_prefix@%$exec_prefix%g
 s%@prefix@%$prefix%g
 s%@program_transform_name@%$program_transform_name%g
-s%@CC@%$CC%g
-s%@HDEFINES@%$HDEFINES%g
-s%@AR@%$AR%g
-s%@RANLIB@%$RANLIB%g
-s%@INSTALL_PROGRAM@%$INSTALL_PROGRAM%g
-s%@INSTALL_DATA@%$INSTALL_DATA%g
-s%@CPP@%$CPP%g
 s%@host@%$host%g
 s%@host_alias@%$host_alias%g
 s%@host_cpu@%$host_cpu%g
@@ -1011,6 +966,13 @@ s%@build_alias@%$build_alias%g
 s%@build_cpu@%$build_cpu%g
 s%@build_vendor@%$build_vendor%g
 s%@build_os@%$build_os%g
+s%@CC@%$CC%g
+s%@HDEFINES@%$HDEFINES%g
+s%@AR@%$AR%g
+s%@RANLIB@%$RANLIB%g
+s%@INSTALL_PROGRAM@%$INSTALL_PROGRAM%g
+s%@INSTALL_DATA@%$INSTALL_DATA%g
+s%@CPP@%$CPP%g
 s%@archdefs@%$archdefs%g
 s%@BFD_MACHINES@%$BFD_MACHINES%g
 
@@ -1171,7 +1133,7 @@ cat >> $CONFIG_STATUS <<\EOF
 fi; done
 
 
-
+case x$CONFIG_HEADERS in xconfig.h:config.in) echo > stamp-h ;; esac
 exit 0
 EOF
 chmod +x $CONFIG_STATUS