* configure.in: Use AM_DISABLE_SHARED.

	* aclocal.m4, configure: Rebuild with libtool 1.2.

1 files changed, 135 insertions, 78 deletions

diff --git a/opcodes/aclocal.m4 b/opcodes/aclocal.m4
index fb24ab8..1ac998a 100644
--- a/opcodes/aclocal.m4
+++ b/opcodes/aclocal.m4
@@ -1,4 +1,14 @@
-dnl aclocal.m4 generated automatically by aclocal 1.2
+dnl aclocal.m4 generated automatically by aclocal 1.2e
+
+dnl Copyright (C) 1994, 1995, 1996, 1997, 1998 Free Software Foundation, Inc.
+dnl This Makefile.in is free software; the Free Software Foundation
+dnl gives unlimited permission to copy and/or distribute it,
+dnl with or without modifications, as long as this notice is preserved.
+
+dnl This program is distributed in the hope that it will be useful,
+dnl but WITHOUT ANY WARRANTY, to the extent permitted by law; without
+dnl even the implied warranty of MERCHANTABILITY or FITNESS FOR A
+dnl PARTICULAR PURPOSE.
 
 sinclude(../bfd/acinclude.m4)
 
@@ -24,8 +34,8 @@ fi
 ifelse([$3],,
 AC_DEFINE_UNQUOTED(PACKAGE, "$PACKAGE")
 AC_DEFINE_UNQUOTED(VERSION, "$VERSION"))
-AM_SANITY_CHECK
-AC_ARG_PROGRAM
+AC_REQUIRE([AM_SANITY_CHECK])
+AC_REQUIRE([AC_ARG_PROGRAM])
 dnl FIXME This is truly gross.
 missing_dir=`cd $ac_aux_dir && pwd`
 AM_MISSING_PROG(ACLOCAL, aclocal, $missing_dir)
@@ -33,7 +43,7 @@ AM_MISSING_PROG(AUTOCONF, autoconf, $missing_dir)
 AM_MISSING_PROG(AUTOMAKE, automake, $missing_dir)
 AM_MISSING_PROG(AUTOHEADER, autoheader, $missing_dir)
 AM_MISSING_PROG(MAKEINFO, makeinfo, $missing_dir)
-AC_PROG_MAKE_SET])
+AC_REQUIRE([AC_PROG_MAKE_SET])])
 
 
 # serial 1
@@ -60,10 +70,21 @@ echo timestamp > conftestfile
 # directory).
 if (
    set X `ls -Lt $srcdir/configure conftestfile 2> /dev/null`
-   if test "$@" = "X"; then
+   if test "[$]*" = "X"; then
       # -L didn't work.
       set X `ls -t $srcdir/configure conftestfile`
    fi
+   if test "[$]*" != "X $srcdir/configure conftestfile" \
+      && test "[$]*" != "X conftestfile $srcdir/configure"; then
+
+      # If neither matched, then we have a broken ls.  This can happen
+      # if, for instance, CONFIG_SHELL is bash and it inherits a
+      # broken ls alias from the environment.  This has actually
+      # happened.  Such a system could not be considered "sane".
+      AC_MSG_ERROR([ls -t appears to fail.  Make sure there is not a broken
+alias in your environment])
+   fi
+
    test "[$]2" = conftestfile
    )
 then
@@ -93,91 +114,56 @@ fi
 AC_SUBST($1)])
 
 
-# serial 18 AM_PROG_LIBTOOL
+# serial 24 AM_PROG_LIBTOOL
 AC_DEFUN(AM_PROG_LIBTOOL,
-[AC_REQUIRE([AC_CANONICAL_HOST])
-AC_REQUIRE([AC_PROG_RANLIB])
-AC_REQUIRE([AC_PROG_CC])
-AC_REQUIRE([AM_PROG_LD])
-AC_REQUIRE([AM_PROG_NM])
-AC_REQUIRE([AC_PROG_LN_S])
-
+[AC_REQUIRE([AM_ENABLE_SHARED])dnl
+AC_REQUIRE([AM_ENABLE_STATIC])dnl
+AC_REQUIRE([AC_CANONICAL_HOST])dnl
+AC_REQUIRE([AC_PROG_RANLIB])dnl
+AC_REQUIRE([AC_PROG_CC])dnl
+AC_REQUIRE([AM_PROG_LD])dnl
+AC_REQUIRE([AM_PROG_NM])dnl
+AC_REQUIRE([AC_PROG_LN_S])dnl
+dnl
 # Always use our own libtool.
 LIBTOOL='$(SHELL) $(top_builddir)/libtool'
-AC_SUBST(LIBTOOL)
-
-dnl CYGNUS LOCAL arguments to enable-shared
-dnl Allow the --disable-shared flag to stop us from building shared libs.
-AC_ARG_ENABLE(shared,
-[  --enable-shared         build shared libraries [default=yes]],
-[p=${PACKAGE-bogus-package-name}
- case "$enableval" in
-  yes) libtool_enable_shared=yes ;;
-  no) libtool_enable_shared=no ;;
-  # The value of $p (aka $PACKAGE) is assumed to come from AM_INIT_AUTOMAKE.
-  # If it didn't, it'll be `bogus-package-name', thus making this condition
-  #  not be used.
-  *$p*) libtool_enable_shared=yes ;;
-  *) libtool_enable_shared=no ;;
-esac])
-test -n "$libtool_enable_shared" && enable_shared="$libtool_enable_shared"
-libtool_shared=
-test "$enable_shared" = no && libtool_shared=" --disable-shared"
-dnl END CYGNUS LOCAL
-
-dnl Allow the --disable-static flag to stop us from building static libs.
-AC_ARG_ENABLE(static,
-[  --enable-static         build static libraries [default=yes]],
-[if test "$enableval" = no; then
-  libtool_enable_static=no
-else
-  libtool_enable_static=yes
-fi])
-test -n "$libtool_enable_static" && enable_static="$libtool_enable_static"
-libtool_static=
-test "$enable_static" = no && libtool_static=" --disable-static"
+AC_SUBST(LIBTOOL)dnl
 
-libtool_flags="$libtool_shared$libtool_static"
+# Check for any special flags to pass to ltconfig.
+libtool_flags=
+test "$enable_shared" = no && libtool_flags="$libtool_flags --disable-shared"
+test "$enable_static" = no && libtool_flags="$libtool_flags --disable-static"
 test "$silent" = yes && libtool_flags="$libtool_flags --silent"
 test "$ac_cv_prog_gcc" = yes && libtool_flags="$libtool_flags --with-gcc"
 test "$ac_cv_prog_gnu_ld" = yes && libtool_flags="$libtool_flags --with-gnu-ld"
 
 # Some flags need to be propagated to the compiler or linker for good
 # libtool support.
-[case "$host" in
+case "$host" in
 *-*-irix6*)
-  ac_save_CFLAGS="$CFLAGS"
-  flag_passed=no
-  for f in -32 -64 -n32 ABI -cckr -mips1 -mips2 -mips3 -mips4; do
-    case "$f" in
-    ABI)
-      test -n "$SGI_ABI" && flag_passed=yes
-      if test "$flag_passed" = no && test "$ac_cv_prog_gcc" = yes; then
-	# Choose the ABI flag according to GCC's specs.
-	if $CC -dumpspecs 2>&1 | sed '/^\*link:$/,/^$/!d' | egrep -e '[ 	]-32' >/dev/null; then
-	  LD="${LD-ld} -32"
-	else
-	  LD="${LD-ld} -n32"
-	fi
-      fi
+  # Find out which ABI we are using.
+  echo '[#]line __oline__ "configure"' > conftest.$ac_ext
+  if AC_TRY_EVAL(ac_compile); then
+    case "`/usr/bin/file conftest.o`" in
+    *32-bit*)
+      LD="${LD-ld} -32"
       ;;
-
-    *)
-      if echo " $CC $CFLAGS " | egrep -e "[ 	]$f[	 ]" > /dev/null; then
-	flag_passed=yes
-	LD="${LD-ld} $f"
-      fi
+    *N32*)
+      LD="${LD-ld} -n32"
+      ;;
+    *64-bit*)
+      LD="${LD-ld} -64"
       ;;
     esac
-  done
-  CFLAGS="$ac_save_CFLAGS"
+  fi
+  rm -rf conftest*
   ;;
 
 *-*-sco3.2v5*)
   # On SCO OpenServer 5, we need -belf to get full-featured binaries.
   CFLAGS="$CFLAGS -belf"
   ;;
-esac]
+esac
 
 # Actually configure libtool.  ac_aux_dir is where install-sh is found.
 CC="$CC" CFLAGS="$CFLAGS" CPPFLAGS="$CPPFLAGS" \
@@ -187,6 +173,77 @@ $libtool_flags --no-verify $ac_aux_dir/ltmain.sh $host \
 || AC_MSG_ERROR([libtool configure failed])
 ])
 
+# AM_ENABLE_SHARED - implement the --enable-shared flag
+# Usage: AM_ENABLE_SHARED[(DEFAULT)]
+#   Where DEFAULT is either `yes' or `no'.  If omitted, it defaults to
+#   `yes'.
+AC_DEFUN(AM_ENABLE_SHARED,
+[define([AM_ENABLE_SHARED_DEFAULT], ifelse($1, no, no, yes))dnl
+AC_ARG_ENABLE(shared,
+changequote(<<, >>)dnl
+<<  --enable-shared         build shared libraries [default=>>AM_ENABLE_SHARED_DEFAULT]
+changequote([, ])dnl
+[  --enable-shared=PKGS    only build shared libraries if the current package
+                          appears as an element in the PKGS list],
+[p=${PACKAGE-default}
+case "$enableval" in
+yes) enable_shared=yes ;;
+no) enable_shared=no ;;
+*)
+  enable_shared=no
+  # Look at the argument we got.  We use all the common list separators.
+  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS="${IFS}:,"
+  for pkg in $enableval; do
+    if test "X$pkg" = "X$p"; then
+      enable_shared=yes
+    fi
+  done
+  IFS="$ac_save_ifs"
+  ;;
+esac],
+enable_shared=AM_ENABLE_SHARED_DEFAULT)dnl
+])
+
+# AM_DISABLE_SHARED - set the default shared flag to --disable-shared
+AC_DEFUN(AM_DISABLE_SHARED,
+[AM_ENABLE_SHARED(no)])
+
+# AM_DISABLE_STATIC - set the default static flag to --disable-static
+AC_DEFUN(AM_DISABLE_STATIC,
+[AM_ENABLE_STATIC(no)])
+
+# AM_ENABLE_STATIC - implement the --enable-static flag
+# Usage: AM_ENABLE_STATIC[(DEFAULT)]
+#   Where DEFAULT is either `yes' or `no'.  If omitted, it defaults to
+#   `yes'.
+AC_DEFUN(AM_ENABLE_STATIC,
+[define([AM_ENABLE_STATIC_DEFAULT], ifelse($1, no, no, yes))dnl
+AC_ARG_ENABLE(static,
+changequote(<<, >>)dnl
+<<  --enable-static         build static libraries [default=>>AM_ENABLE_STATIC_DEFAULT]
+changequote([, ])dnl
+[  --enable-static=PKGS    only build shared libraries if the current package
+                          appears as an element in the PKGS list],
+[p=${PACKAGE-default}
+case "$enableval" in
+yes) enable_static=yes ;;
+no) enable_static=no ;;
+*)
+  enable_static=no
+  # Look at the argument we got.  We use all the common list separators.
+  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS="${IFS}:,"
+  for pkg in $enableval; do
+    if test "X$pkg" = "X$p"; then
+      enable_static=yes
+    fi
+  done
+  IFS="$ac_save_ifs"
+  ;;
+esac],
+enable_static=AM_ENABLE_STATIC_DEFAULT)dnl
+])
+
+
 # AM_PROG_LD - find the path to the GNU or non-GNU linker
 AC_DEFUN(AM_PROG_LD,
 [AC_ARG_WITH(gnu-ld,
@@ -200,7 +257,7 @@ if test "$ac_cv_prog_gcc" = yes; then
   ac_prog=`($CC -print-prog-name=ld) 2>&5`
   case "$ac_prog" in
   # Accept absolute paths.
-  /*)
+  /* | [A-Za-z]:\\*)
     test -z "$LD" && LD="$ac_prog"
     ;;
   "")
@@ -264,20 +321,20 @@ AC_DEFUN(AM_PROG_NM,
 [AC_MSG_CHECKING([for BSD-compatible nm])
 AC_CACHE_VAL(ac_cv_path_NM,
 [case "$NM" in
-/*)
+/* | [A-Za-z]:\\*)
   ac_cv_path_NM="$NM" # Let the user override the test with a path.
   ;;
 *)
   IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS="${IFS}:"
   for ac_dir in /usr/ucb /usr/ccs/bin $PATH /bin; do
-    test -z "$ac_dir" && dir=.
+    test -z "$ac_dir" && ac_dir=.
     if test -f $ac_dir/nm; then
       # Check to see if the nm accepts a BSD-compat flag.
-      # Adding the `sed 1!d' prevents false positives on HP-UX, which says:
+      # Adding the `sed 1q' prevents false positives on HP-UX, which says:
       #   nm: unknown option "B" ignored
-      if ($ac_dir/nm -B /dev/null 2>&1 | sed '1!d'; exit 0) | egrep /dev/null >/dev/null; then
+      if ($ac_dir/nm -B /dev/null 2>&1 | sed '1q'; exit 0) | egrep /dev/null >/dev/null; then
         ac_cv_path_NM="$ac_dir/nm -B"
-      elif ($ac_dir/nm -p /dev/null 2>&1 | sed '1!d'; exit 0) | egrep /dev/null >/dev/null; then
+      elif ($ac_dir/nm -p /dev/null 2>&1 | sed '1q'; exit 0) | egrep /dev/null >/dev/null; then
         ac_cv_path_NM="$ac_dir/nm -p"
       else
         ac_cv_path_NM="$ac_dir/nm"
@@ -365,8 +422,8 @@ AC_DEFUN(AM_EXEEXT,
 [AC_REQUIRE([AM_CYGWIN32])
 AC_REQUIRE([AM_MINGW32])
 AC_MSG_CHECKING([for executable suffix])
-AC_CACHE_VAL(am_cv_exeext,[
-if test "$CYGWIN32" = yes -o "$MINGW32" = yes; then
+AC_CACHE_VAL(am_cv_exeext,
+[if test "$CYGWIN32" = yes || test "$MINGW32" = yes; then
 am_cv_exeext=.exe
 else
 cat > am_c_test.c << 'EOF'