2004-01-26 David Carlton <carlton@kealia.com>carlton_dictionary-branch

	* Merge with mainline; tag is carlton_dictionary-20040126-merge.

1 files changed, 41 insertions, 4289 deletions

diff --git a/opcodes/ChangeLog b/opcodes/ChangeLog
index 7bf5b45..15c6e66 100644
--- a/opcodes/ChangeLog
+++ b/opcodes/ChangeLog
@@ -1,4316 +1,68 @@
-2003-12-15  Kazuhiro Inaoka  <inaoka.kazuhiro@renesas.com>
+2004-01-23  Andrew Over <andrew.over@cs.anu.edu.au>
 
-	* m32r-opc.c: Regenerate.
+	* sparc-opc.c (fdtox, fstox, fqtox, fxtod, fxtos, fxtoq): Tighten
+	contraints.
 
-2003-12-14  Mark Mitchell  <mark@codesourcery.com>
+2004-01-19  Andrew Over  <andrew.over@cs.anu.edu.au>
 
-	* arm-opc.h (arm_opcodes): Put V6 instructions before XScale
-	instructions.
+	* sparc-opc.c (sparc_opcodes) <f[dsq]tox, fxto[dsq]>: Fix args.
 
-2003-12-13  Hans-Peter Nilsson  <hp@bitrange.com>
+2004-01-19  Alan Modra  <amodra@bigpond.net.au>
 
-	* mmix-opc.c (mmix_opcodes): Use GO_INSN_BYTE, PUSHGO_INSN_BYTE,
-	SETL_INSN_BYTE, INCH_INSN_BYTE, INCMH_INSN_BYTE, INCML_INSN_BYTE
-	and SWYM_INSN_BYTE instead of raw numbers.
+	* i386-dis.c (OP_E): Print scale factor on intel mode sib when not
+	1.  Don't print scale factor on AT&T mode when index missing.
 
-2003-12-10  Zack Weinberg  <zack@codesourcery.com>
+2004-01-16  Alexandre Oliva  <aoliva@redhat.com>
 
-	* ppc-opc.c (MO): Make optional.
-	(RAO, RSO, SHO): New optional forms of RA, RS, SH operands.
-	(tlbwe): Accept for both PPC403 and BOOKE.  Make all operands optional.
+	* m10300-opc.c (mov): 8- and 24-bit immediates are zero-extended
+	when loaded into XR registers.
 
-2003-12-05  Ricardo Anguiano <anguiano@codesourcery.com>
-	    Mark Mitchell  <mark@codesourcery.com>
-	    Richard Earnshaw  <rearnsha@arm.com>
+2004-01-14  Richard Sandiford  <rsandifo@redhat.com>
 
-	* arm-dis.c (print_arm_insn): Add 'W' macro.
-	* arm-opc.h (arm_opcodes): Add V6 instructions.
-	(thumb_opcodes): Likewise.
-
-2003-12-04  Alan Modra  <amodra@bigpond.net.au>
-
-	* openrisc-asm.c: Regenerate.
-	* pj-opc.c: Update copyright date.
-
-2003-12-03  Kazuhiro Inaoka  <inaoka.kazuhiro@renesas.com>
-
-	* m32r-asm.c: Regenerate.
-	* m32r-desc.c: Regenerate.
-	* m32r-desc.h: Regenerate.
-	* m32r-dis.c: Regenerate.
-	* m32r-ibld.c: Regenerate.
-	* m32r-opc.c: Regenerate.
-	* m32r-opc.h: Regenerate.
-	* m32r-opinst.c: Regenerate.
-
-2003-12-02  Alexandre Oliva  <aoliva@redhat.com>
-
-	* sh-opc.h: Add support for sh4a and no-fpu variants.
-	* sh-dis.c: Ditto.
-
-2003-12-02  Kazu Hirata  <kazu@cs.umass.edu>
-
-	* alpha-opc.c: Remove ARGSUSED.
-	* i370-opc.c: Likewise.
-	* ppc-opc.c: Likewise.
-
-2003-12-02  Alan Modra  <amodra@bigpond.net.au>
-
-	* Makefile.am: Run "make dep-am".
-	* Makefile.in: Regenerate.
-
-2003-11-28  Christian Groessler  <chris@groessler.org>
-
-	* z8k-dis.c: Convert to ISO C90.
-	* z8kgen.c: Convert to ISO C90.
-	(opt): Move long opcode for "ldb rdb,imm8" after short one, now
-	the short one is created when assembling.
-	* z8k-opc.h: Regenerate with new z8kgen.c.
-
-2003-11-19  Kazu Hirata  <kazu@cs.umass.edu>
-
-	* h8300-dis.c (print_colon_thingie): Remove.
-
-2003-11-18  Maciej W. Rozycki  <macro@ds2.pg.gda.pl>
-
-	* mips-opc.c (mips_builtin_opcodes): Handle new macros: "lca" and
-	"dlca".
-
-2003-11-14  Nick Clifton  <nickc@redhat.com>
-
-	* dis-init.c (init_disassemble_info): Initialise
-	symbol_is_valid field.
-	* dis-buf.c (generic_symbol_is_valid): New function.  Always
-	returns TRUE.
-	* arm-dis.c (arm_symbol_is_valid): New function.  Return FALSE
-	for ARM ELF mapping symbols.
-	* disassemble.c (disassemble_init_for_target): Set
-	symbol_is_valid field to arm_symbol_is_valid of the target is
-	an ARM.
-
-2003-11-05  H.J. Lu  <hongjiu.lu@intel.com>
-
-	* m68k-opc.c (m68k_opcodes): Reorder "fmovel".
-
-2003-11-03  Daniel Jacobowitz  <drow@mvista.com>
-
-	* arm-dis.c (print_arm_insn): Print "-" after "#".
-
-2003-10-30  Falk Hueffner  <falk.hueffner@student.uni-tuebingen.de>
-
-	* alpha-opc.c: Add support for a second argument to RPCC.
-
-2003-10-27  Stephane Carrez  <stcarrez@nerim.fr>
-
-	* m68hc11-dis.c: Convert to ISO C90 prototypes.
-
-2003-10-21  Peter Barada  <pbarada@mail.wm.sps.mot.com>
-	    Bernardo Innocenti  <bernie@develer.com>
-
-	* m68k-dis.c: Add MCFv4/MCF5528x support.
-	* m68k-opc.c: Likewise.
-
-2003-10-10  Dave Brolley  <brolley@redhat.com>
-
-	* frv-asm.c,frv-desc.c,frv-opc.c: Regenerated.
-
-2003-10-08  Dave Brolley  <brolley@redhat.com>
-
-	* frv-desc.[ch], frv-opc.[ch]: Regenerated.
-
-2003-09-30  Bob Wilson  <bob.wilson@acm.org>
-
-	* xtensa-dis.c (fetch_data): Remove numBytes parameter.
-	(print_insn_xtensa): Fix call to fetch_data.
-
-2003-09-30  Chris Demetriou  <cgd@broadcom.com>
-
-	* mips-dis.c (mips_arch_choices): Add entry for "mips64r2"
-	(print_insn_args): Add handing for +E, +F, +G, and +H.
-	* mips-opc.c (I65): New define for MIPS64r2.
-	(mips_builtin_opcodes): Add "dext", "dextm", "dextu", "dins",
-	"dinsm", "dinsu", "drotl", "drotr", "drotr32", "drotrv", "dsbh",
-	and "dshd" for MIPS64r2.  Adjust "dror", "dror32", and "drorv" to
-	be supported on MIPS64r2.
-
-2003-09-24  Dave Brolley  <brolley@redhat.com>
-
-	* frv-desc.c, frv-opc.c, frv-opc.h: Regenerated.
-
-2003-09-14  Andreas Jaeger  <aj@suse.de>
-
-	* i386-dis.c: Convert to ISO C90 prototypes.
-	* i370-dis.c: Likewise.
-	* i370-opc.c: Likewiwse.
-	* i960-dis.c: Likewise.
-	* ia64-opc.c: Likewise.
-
-2003-09-09  Dave Brolley  <brolley@redhat.com>
-
-	* frv-desc.c: Regenerated.
-
-2003-09-08  Dave Brolley  <brolley@redhat.com>
-
-	On behalf of Doug Evans <dje@sebabeach.org>
-	* Makefile.am (run-cgen): Pass new args archfile and opcfile
-	to cgen.sh.
-	(stamp-ip2k,stamp-m32r,stamp-fr30,stamp-frv,stamp-openrisc,
-	stamp-iq2000,stamp-xstormy16): Pass paths of .cpu and .opc files
-	to cgen.sh.
-	(stamp-frv): Delete hardcoded path spec workaround.
-	* Makefile.in: Regenerate.
-	* cgen.sh: New args archfile and opcfile.  Pass on to cgen.
-
-2003-09-04  Nick Clifton  <nickc@redhat.com>
-
-	* v850-dis.c (disassemble): Accept bfd_mach_v850e1.
-	* v850-opc.c (v850_opcodes): Add DBTRAP and DBRET instructions.
-
-2003-09-04  Alan Modra  <amodra@bigpond.net.au>
-
-	* ppc-dis.c (struct dis_private): New.
-	(powerpc_dialect): Make static.  Accept -Many in addition to existing
-	options.  Save dialect in dis_private.
-	(print_insn_big_powerpc): Retrieve dialect from dis_private.
-	(print_insn_little_powerpc): Likewise.
-	(print_insn_powerpc): Call powpc_dialect here.  Remove unnecessary
-	efs/altivec check.  Try harder to disassemble if given -Many.
-	* ppc-opc.c (insert_fxm): Expand comment.
-	(PPC, PPCCOM, PPC32, PPC64, PPCVEC): Remove PPC_OPCODE_ANY.
-	(POWER, POWER2, PPCPWR2, POWER32, COM, COM32, M601, PWRCOM): Likewise.
-	(POWER4): Remove PPCCOM.
-	(PPCONLY): Don't define.  Update all occurrences to PPC.
-
-2003-09-03  Andrew Cagney  <cagney@redhat.com>
-
-	* dis-init.c (init_disassemble_info): New file and function.
-	* Makefile.am (CFILES): Add "dis-init.c".
-	(libopcodes_la_SOURCES): Add "dis-init.c".
-	(dis-init.lo): Specify dependencies.
-	* Makefile.in: Regenerate.
-
-2003-09-03  Dave Brolley  <brolley@redhat.com>
-
-	* frv-*: Regenerated.
-
-2003-09-02  Alan Modra  <amodra@bigpond.net.au>
-
-	* ppc-opc.c (powerpc_opcodes): Combine identical PPC403/BOOKE entries.
-	Move duplicate mnemonic entries together.  Use RS instead of RT on
-	all mt*.
-	* ppc-dis.c: Convert to ISO C.
-
-2003-08-29  Dave Brolley  <brolley@redhat.com>
-
-	* Makefile.am (stamp-frv): Copy frv.cpu and frv.opc from
-	$(srcdir)/../cpu temporarily when regenerating source files.
-	* Makefile.in: Regenerated.
-
-2003-08-19  Nick Clifton  <nickc@redhat.com>
-
-	* arm-dis.c (print_insn_arm: case 'A'): Add code to
-	disassemble unindexed form of Addressing Mode 5.
-
-2003-08-19  Alan Modra  <amodra@bigpond.net.au>
-
-	* ppc-opc.c (PPC440): Define.
-	(powerpc_opcodes): Allow mac*, mul*, nmac*, dccci, dcread, iccci,
-	icread instructions when PPC440.  Add dlmzb instruction.
-
-2003-08-14  Alan Modra  <amodra@bigpond.net.au>
-
-	* dep-in.sed: Remove libintl.h.
-	* Makefile.am (POTFILES.in): Unset LC_COLLATE.
-	Run "make dep-am".
-	* Makefile.in: Regenerate.
-
-2003-08-07  Michael Meissner  <gnu@the-meissners.org>
-
-	* cgen-asm.c (hash_insn_array): Remove PARAMS macro.
-	(hash_insn_list): Ditto.
-	(build_asm_hash_table): Ditto.
-	(cgen_set_parse_operand_fn): Prototype definition.
-	(cgen_init_parse_operand): Ditto.
-	(hash_insn_array): Ditto.
-	(hash_insn_list): Ditto.
-	(build_asm_hash_table): Ditto.
-	(cgen_asm_lookup_insn): Ditto.
-	(cgen_parse_keyword): Ditto.
-	(cgen_parse_signed_integer): Ditto.
-	(cgen_parse_unsigned_integer): Ditto.
-	(cgen_parse_address): Ditto.
-	(cgen_validate_signed_integer): Ditto.
-	(cgen_validate_unsigned_integer): Ditto.
-
-	* cgen-opc.c (hash_keyword_name): Remove PARAMS macro.
-	(hash_keyword_value): Ditto.
-	(build_keyword_hash_tables): Ditto.
-	(cgen_keyword_lookup_name): Prototype definition.
-	(cgen_keyword_lookup_value): Ditto.
-	(cgen_keyword_add): Ditto.
-	(cgen_keyword_search_init): Ditto.
-	(cgen_keyword_search_next): Ditto.
-	(hash_keyword_name): Ditto.
-	(hash_keyword_value): Ditto.
-	(build_keyword_hash_tables): Ditto.
-	(cgen_hw_lookup_by_name): Ditto.
-	(cgen_hw_lookup_by_num): Ditto.
-	(cgen_operand_lookup_by_name): Ditto.
-	(cgen_operand_lookup_by_num): Ditto.
-	(cgen_insn_count): Ditto.
-	(cgen_macro_insn_count): Ditto.
-	(cgen_get_insn_value): Ditto.
-	(cgen_put_insn_value): Ditto.
-	(cgen_lookup_insn): Ditto.
-	(cgen_get_insn_operands): Ditto.
-	(cgen_lookup_get_insn_operands): Ditto.
-	(cgen_set_signed_overflow_ok): Ditto.
-	(cgen_clear_signed_overflow_ok): Ditto.
-	(cgen_signed_overflow_ok_p): Ditto.
-
-	* cgen-dis.c (hash_insn_array): Remove PARAMS macro.
-	(hash_insn_list): Ditto.
-	(build_dis_hash_table): Ditto.
-	(count_decodable_bits): Ditto.
-	(add_insn_to_hash_chain): Ditto.
-	(count_decodable_bits): Prototype definition.
-	(add_insn_to_hash_chain): Ditto.
-	(hash_insn_array): Ditto.
-	(hash_insn_list): Ditto.
-	(build_dis_hash_table): Ditto.
-	(cgen_dis_lookup_insn): Ditto.
-
-	* cgen-asm.in (parse_insn_normal): Remove PARAMS macro.
-	(@arch@_cgen_build_insn_regex): Prototype definition.
-	(parse_insn_normal): Ditto.
-	(@arch@_cgen_assemble_insn): Ditto.
-	(@arch@_cgen_asm_hash_keywords): Ditto.
-
-	* cgen-dis.in (print_normal): Remove PARAMS macro.  Use void *
-	instead of PTR.
-	(print_address): Ditto.
-	(print_keyword): Ditto.
-	(print_insn_normal): Ditto.
-	(print_insn): Ditto.
-	(default_print_insn): Ditto.
-	(read_insn): Ditto.
-	(print_normal): Prototype definition.  Use void * instead of PTR.
-	(print_address): Ditto.
-	(print_keyword): Ditto.
-	(print_insn_normal): Ditto.
-	(read_insn): Ditto.
-	(print_insn): Ditto.
-	(default_print_insn): Ditto.
-	(print_insn_@arch@): Ditto.
-
-	* cgen-ibld.in (insert_normal): Remove PARAMS macro.
-	(insn_insn_normal): Ditto.
-	(extract_normal): Ditto.
-	(extract_insn_normal): Ditto.
-	(put_insn_int_value): Ditto.
-	(insert_1): Ditto.
-	(fill_cache): Ditto.
-	(extract_1): Ditto.
-	(insert_1): Prototype definition.
-	(insert_normal): Ditto.
-	(insert_insn_normal): Ditto.
-	(put_insn_int_value): Ditto.
-	(fill_cache): Ditto.
-	(extract_1): Ditto.
-	(extract_normal): Ditto.
-	(extract_insn_normal): Ditto.
-
-	* fr30-asm.c: Regenerate.
-	* fr30-dis.c: Ditto.
-	* fr30-ibld.c: Ditto.
-	* frv-asm.c: Ditto.
-	* frv-dis.c: Ditto.
-	* frv-ibld.c: Ditto.
-	* ip2k-asm.c: Ditto.
-	* ip2k-dis.c: Ditto.
-	* ip2k-ibld.c: Ditto.
-	* iq2000-asm.c: Ditto.
-	* iq2000-dis.c: Ditto.
-	* iq2000-ibld.c: Ditto.
-	* m32r-asm.c: Ditto.
-	* m32r-dis.c: Ditto.
-	* m32r-ibld.c: Ditto.
-	* openrisc-asm.c: Ditto.
-	* openrisc-dis.c: Ditto.
-	* openrisc-ibld.c: Ditto.
-	* xstormy16-asm.c: Ditto.
-	* xstormy16-dis.c: Ditto.
-	* xstormy16-ibld.c: Ditto.
-
-2003-08-06  Nick Clifton  <nickc@redhat.com>
-
-	* po/fr.po: Updated French translation.
-
-2003-08-05  Nick Clifton  <nickc@redhat.com>
-
-	* configure.in (ALL_LINGUAS): Add nl.
-	* configure: Regenerate.
-	* po/nl.po: New Dutch translation.
-
-2003-07-30  Jason Eckhardt  <jle@rice.edu>
-
-	* i860-dis.c: Convert to ISO C90.  Remove superflous prototypes.
-
-2003-07-30  Nick Clifton  <nickc@redhat.com>
-
-	* po/ro.po: Updated Romanian translation.
-
-2003-07-29  Jakub Jelinek  <jakub@redhat.com>
-
-	* ppc-opc.c (insert_mbe, extract_mbe): Shift 1L instead of 1 up.
-
-2003-07-24  Nick Clifton  <nickc@redhat.com>
-
-	* po/fr.po: Updated French translation.
-
-2003-07-18  Nick Clifton  <nickc@redhat.com>
-
-	* arm-dis.c (parse_arm_disassembler_option): Do not expect
-	option string to be NUL terminated.
-	(parse_disassembler_options): Allow options to be space or
-	comma separated.
-
-2003-07-17  Nick Clifton  <nickc@redhat.com>
-
-	* po/es.po: New Spanish translation.
-	* po/sv.po: New Swedish translation.
-	* po/opcodes.pot: Regenerate.
-
-2003-07-15  Richard Sandiford  <rsandifo@redhat.com>
-
-	* mips-dis.c (mips_arch_choices): Add rm7000 and rm9000 entries.
-
-2003-07-14  Nick Clifton  <nickc@redhat.com>
-
-	* po/tr.po: Update with latest version.
-	* po/POTFILES.in: Regenerate.
-	* Makefile.in: Regenerate.
-
-2003-07-11  Alan Modra  <amodra@bigpond.net.au>
-
-	* po/opcodes.pot: Regenerate.
-
-2003-07-09  Alexandre Oliva  <aoliva@redhat.com>
-
-	2000-05-25  Alexandre Oliva  <aoliva@cygnus.com>
-	* m10300-dis.c (disassemble): Negate negative accumulator's shift.
-	2000-05-24  Alexandre Oliva  <aoliva@cygnus.com>
-	* m10300-dis.c (disassemble, case FSREG, FDREG): Don't assume
-	32-bit longs when sign-extending operands.
-	2000-04-20  Alexandre Oliva  <aoliva@cygnus.com>
-	* m10300-opc.c: Remove MN10300_OPERAND_RELAX from all FSREGs.
-	* m10300-dis.c (HAVE_AM33_2): Define.
-	(disassemble): Use it.
-	(HAVE_AM33): Redefine.
-	(print_insn_mn10300): Fix mask for 5-byte extended insns.
-	2000-04-01  Alexandre Oliva  <aoliva@cygnus.com>
-	* m10300-opc.c: Renamed AM332 to AM33_2.
-	2000-03-31  Alexandre Oliva  <aoliva@cygnus.com>
-	* m10300-opc.c: Defined AM33 2.0 register operands.  Added support
-	for AM33 2.0 `imm8,(abs16)' addressing mode for btst, bset and
-	bclr.  Implemented `fbCC', `flCC', `dcpf' and all FP insns.
-	* m10300-dis.c (print_insn_mn10300): Recognize 5byte extended
-	insn code of AM33 2.0.
-	(disassemble): Recognize FMT_D3.  Print out FP register names.
-
-2003-07-09  Chris Demetriou  <cgd@broadcom.com>
-
-	* mips-dis.c (set_default_mips_dis_options): Get BFD from
-	the disassembler_info's section, rather than from the
-	disassembler_info's symbols pointer.
-
-2003-07-07  Alan Modra  <amodra@bigpond.net.au>
-
-	* ppc-opc.c: Remove NULL pointer checks.  Formatting.  Remove
-	extraneous ATTRIBUTE_UNUSED.
-	* ppc-dis.c (print_insn_powerpc): Always pass a valid address to
-	operand->extract.
-
-2003-07-04  Alan Modra  <amodra@bigpond.net.au>
-
-	* ppc-opc.c: Convert to C90, removing unnecessary prototypes and
-	casts.  Formatting.
-
-	* ppc-opc.c: Remove PARAMS from prototypes.
-	(FXM4): Define.
-	(insert_fxm): New function, used by both FXM and FXM4.
-	(extract_fxm): Likewise.
-	(XFXFXM_MASK): Remove 1 << 20 term.
-	(powerpc_opcodes): Add Power4 version of "mfcr".  Simplify "mtcr" mask.
-
-2003-07-01  Martin Schwidefsky  <schwidefsky@de.ibm.com>
-
-	* s390-dis.c (s390_extract_operand): Add support for long displacements.
-	* s390-mkopc.c (s390_opcode_cpu_val): Add support for cpu type z990.
-	* s390-opc.c (D20_20): Add define for 20 bit displacements.
-	(INSTR_RRF_R0RR, INSTR_RSL_R0RD, INSTR_RSY_RRRD, INSTR_RSY_RURD,
-	INSTR_RSY_AARD, INSTR_RXY_RRRD, INSTR_RXY_FRRD, INSTR_SIY_URD): Add
-	new instruction formats.
-	(MASK_RRF_R0RR, MASK_RSL_R0RD, MASK_RSY_RRRD, MASK_RSY_RURD,
-	MASK_RSY_AARD, MASK_RXY_RRRD, MASK_RXY_FRRD, MASK_SIY_URD): Likewise.
-	(s390_opformats): Likewise.
-	* s390-opc.txt: Add new instructions for cpu type z990. Add missing
-	hfp instructions. Add missing instructions pgin, pgout and xsch.
-
-2003-06-23  H.J. Lu <hongjiu.lu@intel.com>
-
-	* i386-dis.c (PNI_Fixup): New. Fix up "mwait" and "monitor" in
-	Intel Precott New Instructions.
-	(PREGRP27): New. Added for "addsubpd" and "addsubps".
-	(PREGRP28): New. Added for "haddpd" and "haddps".
-	(PREGRP29): New. Added for "hsubpd" and "hsubps".
-	(PREGRP30): New. Added for "movsldup" and "movddup".
-	(PREGRP31): New. Added for "movshdup" and "movhpd".
-	(PREGRP32): New. Added for "lddqu".
-	(dis386_twobyte): Use PREGRP30 to replace the "movlpX" entry.
-	Use PREGRP31 to replace the "movhpX" entry. Use PREGRP28 for
-	entry 0x7c. Use PREGRP29 for entry 0x7d. Use PREGRP27 for
-	entry 0xd0. Use PREGRP32 for entry 0xf0.
-	(twobyte_has_modrm): Updated.
-	(twobyte_uses_SSE_prefix): Likewise.
-	(grps): Use PNI_Fixup in the "sidtQ" entry.
-	(prefix_user_table): Add PREGRP27, PREGRP28, PREGRP29, PREGRP30,
-	PREGRP31 and PREGRP32.
-	(float_mem): Use "fisttp{l||l|}" in entry 1 in opcode 0xdb.
-	Use "fisttpll" in entry 1 in opcode 0xdd.
-	Use "fisttp" in entry 1 in opcode 0xdf.
-
-2003-06-19  Christian Groessler  <chris@groessler.org>
-
-	* z8k-dis.c (instr_data_s): Change tabl_index from long to int.
-	(print_insn_z8k): Correctly check return value from
-	z8k_lookup_instr call.
-	(unparse_instr): Handle CLASS_IRO case.
-	* z8kgen.c: Fix function definitions.  Fix formatting.
-	(opt): Add brk opcode alias for non-simulator breakpoint.  Add
-	missing and fix existing in/out and sin/sout opcode definitions.
-	(args): "@ri", "@ro" - add CLASS_IRO register usage for in/out
-	opcodes.
-	(internal): Check p->flags for non-zero before dereferencing it.
-	(gas): Add CLASS_IRO line.  Insert new OPC_xxx lines for the added
-	opcodes and renumber the remaining lines repectively.
-	(main): Remove "-d" command line switch.
-	* z8k-opc.h: Regenerate with new z8kgen.c.
-
-2003-06-11  H.J. Lu <hongjiu.lu@intel.com>
-
-	* po/Make-in (DESTDIR): New.
-	(install-data-yes): Support $(DESTDIR).
-	(uninstall): Likewise.
-
-2003-06-11  Alan Modra  <amodra@bigpond.net.au>
-
-	* Makefile.am: Run "make dep-am".
-	* Makefile.in: Regenerate.
-	* po/POTFILES.in: Regenerate.
-
-2003-06-10  Doug Evans  <dje@sebabeach.org>
-
-	* cgen-asm.in (@arch@_cgen_assemble_insn): CGEN_INSN_RELAX renamed to
-	CGEN_INSN_RELAXED.
-	* fr30-asm.c,fr30-desc.c,fr30-desc.h: Regenerate.
-	* frv-asm.c,frv-desc.c,frv-desc.h: Regenerate.
-	* ip2k-asm.c,ip2k-desc.c,ip2k-desc.h: Regenerate.
-	* iq2000-asm.c,iq2000-desc.c,iq2000-desc.h: Regenerate.
-	* m32r-asm.c,m32r-desc.c,m32r-desc.h,m32r-opc.c: Regenerate.
-	* openrisc-asm.c,openrisc-desc.c,openrisc-desc.h: Regenerate.
-	* xstormy16-asm.c,xstormy16-desc.c,xstormy16-desc.h: Regenerate.
-
-2003-06-10  Gary Hade <garyhade@us.ibm.com>
-	    Alan Modra  <amodra@bigpond.net.au>
-
-	* ppc-opc.c (DQ, RAQ, RSQ, RTQ): Define.
-	(insert_dq, extract_dq, insert_raq, insert_rtq, insert_rsq): New.
-	(powerpc_opcodes): Add "attn", "lq" and "stq".
-
-2003-06-10  Richard Sandiford  <rsandifo@redhat.com>
-
-	* h8300-dis.c (bfd_h8_disassemble): Don't print brackets round
-	rts/l and rte/l register lists.
-
-2003-06-03  Nick Clifton  <nickc@redhat.com>
-
-	* frv-desc.c: Regenerate.
-	* frv-opc.c: Regenerate.
-	* frv-asm.c: Regenerate.
 	* frv-desc.h: Regenerate.
-	* frv-dis.c: Regenerate.
-	* frv-ibld.c: Regenerate.
-	* frv-opc.h: Regenerate.
-	* po/opcodes.pot: Regenerate.
-
-2003-06-03  Michael Snyder  <msnyder@redhat.com>
-	and Bernd Schmidt   <bernds@redhat.com>
-	and Alexandre Oliva <aoliva@redhat.com>
-
-	* disassemble.c (disassembler): Add support for h8300sx.
-	* h8300-dis.c: Ditto.
-
-2003-06-03  Nick Clifton  <nickc@redhat.com>
-
 	* frv-desc.c: Regenerate.
 	* frv-opc.c: Regenerate.
 
-	* aclocal.m4: Regenerate.
-	* config.in: Regenerate.
-	* configure: Regenerate.
-	* iq2000-asm.c: Regenerate.
-	* iq2000-desc.c: Regenerate.
-	* iq2000-desc.h: Regenerate.
-	* iq2000-dis.c: Regenerate.
-	* iq2000-ibld.c: Regenerate.
-	* iq2000-opc.c: Regenerate.
-	* iq2000-opc.h: Regenerate.
-	* po/POTFILES.in: Regenerate.
-	* po/opcodes.pot: Regenerate.
-
-2003-05-23  Jason Eckhardt  <jle@rice.edu>
-
-	* i860-dis.c (crnames): Add bear, ccr, p0, p1, p2, p3.
-	(print_insn_i860): Grab 4 bits of the control register field
-	instead of 3.
-
-2003-05-18  Jason Eckhardt  <jle@rice.edu>
-
-	* i860-dis.c (print_insn_i860): Instruction shrd has a dual bit,
-	print it.
-
-2003-05-17  Andreas Jaeger  <aj@suse.de>
-
-	* Makefile.am (libopcodes_la_LIBADD): Add libbfd.la.
-	(libopcodes_la_DEPENDENCIES): Add libbfd.la.
-	* Makefile.in: Regenerated.
-
-2003-05-16  Nick Clifton  <nickc@redhat.com>
-
-	* configure.in (ALL_LINGUAS): Add Romanian translation.
-	* configure: Regenerate.
-	* po/ro.po: New file: Romanian translation.
-
-2003-05-12  Dhananjay Deshpande  <dhananjayd@kpitcummins.com>
-
-	* disassemble.c (disassembler): Add support for h8300hn and h8300sn.
-
-2003-05-09  Alan Modra  <amodra@bigpond.net.au>
-
-	* i386-dis.c (print_insn): Test intel_syntax against (char) -1 in
-	case char is unsigned.
-
-2003-05-01  Christian Groessler <chris@groessler.org>
-
-	* z8k-dis.c (z8k_lookup_instr): Optimize FETCH_DATA calls.
-	(unpack_instr): Fix representation of segmented addresses.
-	(intr_name): Added, contains names of the parameters to the EI/DI
-	instructions.
-	(unparse_instr): Fix display of EI/DI parameters.
-
-2003-04-22  Doug Evans  <dje@sebabeach.org>
-
-	* fr30-desc.c,fr30-desc.h,fr30-opc.c,fr30-opc.h: Regenerate.
-	* frv-desc.c,frv-desc.h,frv-opc.c,frv-opc.h: Regenerate.
-	* ip2k-desc.c,ip2k-desc.h,ip2k-opc.c,ip2k-opc.h: Regenerate.
-	* m32r-desc.c,m32r-desc.h,m32r-opc.c,m32r-opc.h: Regenerate.
-	* m32r-opinst.c: Regenerate.
-	* openrisc-desc.c,openrisc-desc.h,openrisc-opc.c,openrisc-opc.h: Regenerate.
-	* xstormy16-desc.c,xstormy16-desc.h,xstormy16-opc.c,xstormy16-opc.h: Regenerate.
-
-2003-04-15  Rohit Kumar Srivastava <rohits@kpitcummins.com>
-
-	* h8500-opc.c: Replace occurrances of 'Hitachi' with 'Renesas'.
-
-2003-04-07  James E Wilson  <wilson@tuliptree.org>
-
-	* ia64-ic.tbl (fr-readers): Add mem-writers-fp.
-	* ia64-asmtab.c: Regenerate.
-
-2003-04-08  Alexandre Oliva  <aoliva@redhat.com>
-
-	* mips-dis.c (mips_gpr_names_newabi): Reverted previous patch.
-
-2003-04-07  Alexandre Oliva  <aoliva@redhat.com>
-
-	* mips-dis.c (mips_gpr_names_newabi): $12-$15 are named $t4-$t7.
-
-2003-04-04  Svein E. Seldal  <Svein.Seldal@solidas.com>
-
-	* tic4x-dis.c: Namespace cleanup. Replace s/c4x/tic4x and
-	s/c3x/tic3x/
-
-2003-04-01  Nick Clifton  <nickc@redhat.com>
-
-	* arm-dis.c: Remove presence of (r) and (tm) symbols.
-	* arm-opc.h: Remove presence of (r) and (tm) symbols.
-
-2003-03-25  Stan Cox   <scox@redhat.com>
-	    Nick Clifton  <nickc@redhat.com>
-
-	Contribute support for Intel's iWMMXt chip - an	ARM variant:
-
-	* arm-dis.c (regnames): Add iWMMXt register names.
-	(set_iwmmxt_regnames): New function.
-	(print_insn_arm): Handle iWMMXt formatters.
-	* arm-opc.h: Document iWMMXt formatters.
-	(arm_opcod): Add iWMMXt instructions.
-
-2003-03-22  Doug Evans  <dje@sebabeach.org>
-
-	* i386-dis.c (dis386): Recognize icebp (0xf1).
-
-2003-03-21  Martin Schwidefsky  <schwidefsky@de.ibm.com>
-
-	* s390-dis.c (init_disasm): Rename S390_OPCODE_ESAME to
-	S390_OPCODE_ZARCH.
-	(print_insn_s390): Use new modes field of s390_opcodes.
-	* s390-mkopc.c (ARCHBITS_ESAONLY, ARCHBITS_ESA, ARCHBITS_ESAME): Remove.
-	(s390_opcode_mode_val, s390_opcode_cpu_val): New enums.
-	(struct op_struct): Remove archbits. Add mode_bits and min_cpu.
-	(insertOpcode): Replace archbits by min_cpu and mode_bits.
-	(dumpTable): Write mode_bits and min_cpu instead of archbits.
-	(main): Adapt to new format in s390-opcode.txt.
-	* s390-opc.c (s390_opformats): Replace archbits by min_cpu and
-	mode_bits.
-	* s390-opc.txt: Replace archbits by min_cpu and mode_bits.
-
-2003-03-17  Nick Clifton  <nickc@redhat.com>
-
-	* ppc-opc.c: Fix formatting.  Update copyright date.
-
-2003-03-14  Daniel Jacobowitz  <drow@mvista.com>
-
-	* ppc-opc.c (powerpc_opcodes): Readd tlbre for PPC403.
-
-2003-02-25  Alan Modra  <amodra@bigpond.net.au>
-
-	* hppa-dis.c: Formatting.
-
-2003-02-25  Matthew Wilcox  <willy@debian.org>
-
-	* hppa-dis.c (print_insn_hppa): Implement fcnv instruction modifiers.
-
-	* hppa-dis.c (print_insn_hppa <2 bit space register>): Do not print
-	the space register when the value is zero.
-
-2003-02-23  Elias Athanasopoulos  <elathan@phys.uoa.gr>
-
-	* mips-dis.c (print_mips_disassembler_options): Make 'i' unsigned,
-	use ARRAY_SIZE in loops.
-
-2003-02-12  Dave Brolley  <brolley@redhat.com>
-
-	* fr30-desc.c: Regenerate.
-
-2003-02-06  Gwenole Beauchesne  <gbeauchesne@mandrakesoft.com>
-
-	* i386-dis.c (dq_mode, Edq): Define.
-	(dis386_twobyte): Correct movd operands.
-	(OP_E): Handle dq_mode case.
-
-2003-01-29  Henric Jungheim <henric@attbi.com>
-
-	* sparc-dis.c (print_insn_sparc): When examining values added in
-	to rs1, make sure that there are previous instructions.
-
-2003-01-23  Nick Clifton  <nickc@redhat.com>
-
-	* Add sh2e support:
-
-	2002-04-02  Alexandre Oliva  <aoliva@redhat.com>
-
-		* sh-dis.c (print_insn_shx): Handle bfd_mach_sh2e.
-		* sh-opc.h (arch_sh2e, arch_sh2e_up): New.
-		(arch_sh2_up): Added sh2e.
-		(sh_table): Replaced all occurrences of arch_sh3e_up with
-		arch_sh2e_up, except in fsqrt.
-
-2003-01-23  Alan Modra  <amodra@bigpond.net.au>
-
-	* sh64-dis.c: Include elf32-sh64.h.
-	* Makefile.am: Run "make dep-am".
-	* Makefile.in: Regenerate.
-
-2003-01-17  Richard Henderson  <rth@redhat.com>
-
-	* alpha-opc.c (alpha_opcodes): Add bugchk, rduniq, wruniq, gentrap
-	PAL entry points.
-
-2003-01-16  Alan Modra  <amodra@bigpond.net.au>
-
-	* Makefile.am: Run "make dep-am".
-	* Makefile.in: Regenerate.
-	* po/POTFILES.in: Regenerate.
-
-2003-01-08  Klee Dienes  <kdienes@apple.com>
-
-	* Makefile.am (ALL_MACHINES): Add msp430-dis.lo.
-	* Makefile.in: Regenerate.
-
-2003-01-08  Alan Modra  <amodra@bigpond.net.au>
-
-	* ppc-opc.c (powerpc_macros <extrwi>): Accept a shift of 32.
-
-2002-01-02  Ben Elliston  <bje@redhat.com>
-	    Jeff Johnston  <jjohnstn@redhat.com>
-
-	* iq2000-asm.c: New file.
-	* iq2000-desc.c: Likewise.
-	* iq2000-desc.h: Likewise.
-	* iq2000-dis.c: Likewise.
-	* iq2000-ibld.c: Likewise.
-	* iq2000-opc.c: Likewise.
-	* iq2000-opc.h: Likewise.
-	* Makefile.am (HFILES): Add iq2000-desc.h, iq2000-opc.h.
-	(CFILES): Add iq2000-asm.c, iq2000-desc.c, iq2000-dis.c,
-	iq2000-ibld.c, iq2000-opc.c.
-	(ALL_MACHINES): Add iq2000-asm.lo, iq2000-desc.lo, iq2000-dis.lo,
-	iq2000-ibld.lo, iq2000-opc.lo.
-	(CLEANFILES): Add stamp-iq2000.
-	(IQ2000_DEPS): New macro.
-	(stamp-iq2000): New target.
-	* Makefile.in: Regenerate.
-	* configure.in: Handle bfd_iq2000_arch.
-	* configure: Regenerate.
-
-2003-01-02  Chris Demetriou  <cgd@broadcom.com>
-
-	* mips-dis.c (print_insn_args): Use position extracted by "+A"
-	to calculate size for "+B".  Redo code for "+C" so it shares
-	the same style as "+A" and "+B" now do.
-
-2003-01-02  Chris Demetriou  <cgd@broadcom.com>
-
-	* mips-dis.c: Update copyright years.
-	(print_insn_arg): Rename to...
-	(print_insn_args): This, returning void.  Process the whole
-	string of args rather than a single one.  Reindent.
-	(print_insn_mips): Update to match the above.
-
-2002-12-31  Chris Demetriou  <cgd@broadcom.com>
-
-	* mips-opc.c (mips_builtin_opcodes): Move "di" into the
-	right order alphabetically, and make all hex constants use
-	lower-case letters.
-
-2002-12-31  Chris Demetriou  <cgd@broadcom.com>
-
-	* mips-dis.c (mips_cp0sel_name): New structure.
-	(mips_cp0sel_names_mips3264, mips_cp0sel_names_mips3264r2)
-	(mips_cp0sel_names_sb1): New arrays.
-	(mips_arch_choice): New structure members "cp0sel_names" and
-	"cp0sel_names_len".
-	(mips_arch_choices): Add references to new cp0sel_names arrays
-	as appropriate, and make all existing entries reference
-	appropriate mips_XXX_names_numeric arrays rather than simply
-	using NULL.
-	(mips_cp0sel_names, mips_cp0sel_names_len): New variables.
-	(lookup_mips_cp0sel_name): New function.
-	(set_default_mips_dis_options): Set mips_cp0sel_names and
-	mips_cp0sel_names_len as appropriate.  Remove now-unnecessary
-	checks for NULL register name arrays.
-	(parse_mips_dis_option): Likewise.
-	(print_insn_arg): Handle "+D" operand type.
-	* mips-opc.c (mips_builtin_opcodes): Add new "+D" variants
-	of mfc0, mtc0, dmfc0, and dmtc0 to print CP0+sel register
-	names symbolically.
-
-2002-12-30  Chris Demetriou  <cgd@broadcom.com>
-
-	* mips-dis.c (mips_cp0_names_mips3264r2, mips_hwr_names_numeric)
-	(mips_hwr_names_mips3264r2): New arrays.
-	(mips_arch_choice): New "hwr_names" member.
-	(mips_arch_choices): Adjust for structure change, and add a new
-	entry for "mips32r2" ISA.
-	(mips_hwr_names): New variable.
-	(set_default_mips_dis_options): Set mips_hwr_names.
-	(parse_mips_dis_option): New "hwr-names" option which sets
-	mips_hwr_names, and adjust "reg-names=ARCH" to set mips_hwr_names.
-	(print_insn_arg): Change return type to "int"
-	and use that to indicate number of characters consumed.
-	Add support for "+" operand extension character, "+A", "+B",
-	"+C", and "K" operands.
-	(print_insn_mips): Adjust for changes to print_insn_arg.
-	(print_mips_disassembler_options): Adjust for "hwr-names"
-	addition and "reg-names" change.
-	* mips-opc (I33): New define (shorthand for INSN_ISA32R2).
-	(mips_builtin_opcodes): Note that "nop" and "ssnop" are special
-	forms of "sll".  Add new MIPS32 Release 2 instructions: ehb,
-	di, ei, ext, ins, jr.hb, jalr.hb, mfhc1, mfhc2, mthc1, mthc2,
-	rdhwr, rdpgpr, seb, seh, synci, wrpgpr, wsbh.
-	Note that hardware rotate instructions (ror, rorv) can be
-	used on MIPS32 Release 2, and add the official mnemonics
-	for them (rotr, rotrv) and the similar "rotl" mnemonic for
-	left-rotate.
-
-2002-12-30    Dmitry Diky <diwil@mail.ru>
-
-	* configure.in: Add msp430 target.
-	* configure: Regenerate.
-	* disassemble.c: Add entry for msp430 disassembly.
-	* msp430-dis.c: New file: msp430 disassembler.
-
-2002-12-27  Chris Demetriou  <cgd@broadcom.com>
-
-	* disassemble.c (disassembler_usage): Add invocation of
-	print_mips_disassembler_options.
-	* mips-dis.c: Include libiberty.h.
-	(print_mips_disassembler_options, set_default_mips_dis_options)
-	(parse_mips_dis_option, parse_mips_dis_options, choose_abi_by_name)
-	(choose_arch_by_name, choose_arch_by_number): New functions.
-	(mips_abi_choice, mips_arch_choice): New structures.
-	(mips32_reg_names, mips64_reg_names, reg_names): Remove.
-	(mips_gpr_names_numeric, mips_gpr_names_oldabi)
-	(mips_gpr_names_newabi, mips_fpr_names_numeric)
-	(mips_fpr_names_32, mips_fpr_names_n32, mips_fpr_names_64)
-	(mips_cp0_names_numeric, mips_cp0_names_mips3264)
-	(mips_cp0_names_sb1, mips_abi_choices, mips_arch_choices)
-	(mips_processor, mips_isa, mips_gpr_names, mips_fpr_names)
-	(mips_cp0_names): New variables.
-	(print_insn_args): Use new variables to print GPR, FPR, and CP0
-	register names.
-	(mips_isa_type): Remove.
-	(print_insn_mips): Remove ISA and CPU setup since it is now done...
-	(_print_insn_mips): Here.  Remove register setup code, and
-	call set_default_mips_dis_options and parse_mips_dis_options
-	instead.
-	(print_mips16_insn_arg): Use mips_gpr_names instead of mips32_names.
-
-2002-12-23  Alan Modra  <amodra@bigpond.net.au>
-
-	* Makefile.in: Regenerate.
-
-2002-12-19  Nick Kelsey  <nickk@ubicom.com>
-
-	* cgen-asm.c (cgen_parse_keyword): Added underscore to symbol character
-	check to fix false keyword trigger with names such as <keyword>_foo.
-
-2002-12-19  Doug Evans  <dje@sebabeach.org>
-
-	* Makefile.am (CGEN_CPUS): New variable.
-	(run-cgen-all): New rule.
-	* Makefile.in: Regenerate.
-
-2002-12-18  Chris Demetriou  <cgd@broadcom.com>
-
-	* mips-opc.c (mips_builtin_opcodes): Remove one "ror" and two
-	"dror" entries, and reorder the remaining "dror" and "ror" entries.
-
-2002-12-16  DJ Delorie  <dj@delorie.com>
-
-	* xstormy16-asm.c (parse_immediate16): Add prototype.
-
-2002-12-16  Andrew MacLeod  <amacleod@redhat.com>
-
-	* xstormy16-asm.c: Regenerate.
-
-2002-12-16  Alan Modra  <amodra@bigpond.net.au>
-
-	* ns32k-dis.c (print_insn_ns32k): Constify "d", remove register
-	keyword.
-
-2002-12-13  Alan Modra  <amodra@bigpond.net.au>
-
-	* h8500-opc.h (h8500_table): Add missing initializers to quiet
-	warnings.
-	* pj-dis.c (print_insn_pj): Adjust for pj_opc_info_t change.
-	* pj-opc.c (pj_opc_info): Add braces around union initializer.
-	* z8kgen.c: Include "libiberty.h".
-	(opt, args, toks): Fix initializer warnings.
-	(chewname): Make "name" a char **.  Return mnemonic trimmed of
-	operands.
-	(gas): Improve emitted "DO NOT EDIT" warning.  Format emitted
-	opcode_entry_type, and make "nicename" and "name" const.  Make
-	z8k_table const too.  Formatting.  Generate idx as gas needs it.
-	* z8k-opc.h: Regenerate.
-
-2002-12-08  Stephane Carrez  <stcarrez@nerim.fr>
-
-	* m68hc11-dis.c (print_indexed_operand): Fix PC-relative address
-	for 9 and 16-bit PC-relative addressing mode.
-
-2002-12-05  Aldy Hernandez  <aldyh@redhat.com>
-
-	* ppc-opc.c: Delete evsabs, evsnabs, evsneg, evsadd, evssub,
-	evsmul, evsdiv, evscmpgt, evsgmplt, evststgt, evtstlt, evststeq,
-	evscfui, evscfsi, evscfuf, evscfsf, evsctui, evsctuiz, evsctsi,
-	evsctsiz, evsctuf, evsctsf, evmwhssfaa, evmwhssmaa, evmwhsmfaa,
-	evmwhsmiaa, evmwhusiaa, evmwhumiaa, evmwhssfan, evmwhssian,
-	evmwhsmfan, evmwhsmian, evmwhusian, evmwhumian, evmwhgssfaa,
-	evmwhgsmfaa, evmwhgsmiaa, evmwhgumiaa, evmwhgssfan, evmwhgsmfan,
-	evmwhgsmian, evmwhgumian.
-	(mftb): Add to opcode table.
-	(mtspefscr): Change RT to RS in opcode table.
-
-2002-12-05  Aldy Hernandez  <aldyh@redhat.com>
-
-	* ppc-opc.c: Move mbar and msync up.  Change mask for mbar and
-	msync.
-
-2002-12-04  David Mosberger  <davidm@hpl.hp.com>
-
-	* ia64-opc-d.c (ia64_opcodes_d): Add "hint" instruction.
-	* ia64-opc-b.c: Add "hint.b" instruction.
-	* ia64-opc-f.c: Add "hint.f" instruction.
-	* ia64-opc-i.c: Add "hint.i" instruction.
-	* ia64-opc-m.c: Add "hint.m", "fc.i", "ld16", "st16", and
-	"cmp8xchg16" instructions.
-	* ia64-opc-x.c: Add "hint.x" instruction.
-
-	* ia64-opc.h (AR_CSD): New macro.
-
-	* ia64-ic.tbl: Update according to SDM2.1.
-	* ia64-raw.tbl: Ditto.
-	* ia64-waw.tbl: Ditto.
-
-	* ia64-gen.c (in_iclass): Handle "hint" like "nop".
-	(lookup_regindex): Recognize AR[FCR], AR[EFLAG], AR[CSD],
-	AR[SSD], AR[CFLG], AR[FSR], AR[FIR], and AR[FDR].
-	* ia64-asmtab.c: Regenerate.
-
-2002-11-25  Aldy Hernandez  <aldyh@redhat.com>
-
-	* ppc-opc.c: Remove evmwlssf, evmwlssfa, evmwlsmf, evmwlsmfa,
-	evmwlssfaaw, evmwlsmfaaw, evmwlssfanw, evmwlsfanw.
-
-2002-12-04  Aldy Hernandez  <aldyh@redhat.com>
-
-	* ppc-opc.c (PMRN): Remove.
-	(RA): Set to NB + 1.
-	(powerpc_opcodes): Change PMRN to SPR.
-	Change all RD to RS.
-	Change mftb to look like mftbl.
-	Move mftb before mftbl.
-	Add mfbbtar.
-	Add mtbbtar.
-	Change mfpmr to use PMR.
-	Change mtpmr to use PMR.
-	(RD): Remove.
-	(insert_ev2): Fix mask and shift.
-	(extract_ev2): Same.
-	(insert_ev4): Same.
-	(extract_ev4): Same.
-	(PMR): Define.
-	(extract_pmrn): Remove.
-	(insert_pmrn): Remove.
-
-2002-12-03  Richard Henderson  <rth@redhat.com>
-
-	* ia64-opc-m.c: Add ld8.mov.
-	* ia64-asmtab.c: Regenerate.
-
-2002-12-02  Alan Modra  <amodra@bigpond.net.au>
-
-	* arm-dis.c (print_insn_arm): Constify "insn".  Formatting.
-	(print_insn_thumb): Likewise.
-	* h8500-dis.c (print_insn_h8500): Constify "opcode".
-	* mcore-dis.c (print_insn_mcore): Constify "op".  Formatting.
-	* ns32k-dis.c (print_insn_arg <case 'F'>): Use a union to avoid
-	type-punned pointer warnings.
-	<case 'L'>: Likewise.  Fix error message too.
-	* pdp11-dis.c (print_reg): Warning fix.
-	* sh-dis.c (print_movxy): Constify "op" param.
-	(print_insn_ddt): Constify sh_opcode_info vars.
-	(print_insn_ppi): Likewise.
-	(print_insn_sh): Likewise.
-	* tic30-dis.c (cnvt_tmsfloat_ieee): Use a union to avoid
-	type-punned pointer warnings.
-	* w65-dis.c (print_insn_w65): Constify "op".
-
-2002-12-01  Stephane Carrez  <stcarrez@nerim.fr>
-
-	* m68hc11-dis.c (PC_REGNUM): Define.
-	(print_indexed_operand): Need an adjustment for some PC-relative
-	operand modes; print the final address of PC-relative modes.
-	(print_insn): Take into account movw/movb to adjust the PC-relative
-	operand addresses.
-
-2002-11-30  Alan Modra  <amodra@bigpond.net.au>
-
-	*arm-dis.c, cris-dis.c, h8300-dis.c, mips-dis.c, mmix-dis.c, sh-dis.c,
-	sh64-dis.c, v850-dis.c: Replace boolean with bfd_boolean, true with
-	TRUE, false with FALSE.  Simplify comparisons of bfd_boolean vars
-	with TRUE/FALSE.  Formatting.
-
-2002-11-25  DJ Delorie  <dj@redhat.com>
-
-	* xstormy16-opc.c: Regenerate.
-
-2002-11-25  Jim Wilson  <wilson@redhat.com>
-
-	* ia64-dis.c (print_insn_ia64): Correct handling of IA64_OPND_TGT64.
-
-2002-11-15  DJ Delorie  <dj@redhat.com>
-
-	* xstormy16-desc.c: Regenerate.
-	* xstormy16-opc.c: Regenerate.
-	* xstormy16-opc.h: Regenerate.
-
-2002-11-18  Klee Dienes  <kdienes@apple.com>
-
-	* avr-dis.c: Include libiberty.h (for xmalloc).
-	(struct avr_opcodes_s): Remove 'bin_mask' field (it's
-	automatically computed in the init routine).
-	(AVR_INSN): No longer provide bin_mask field in initializer.
-	(avr_opcodes_s): Declare as const.
-	(print_insn_avr): Store the bin_mask field in a separate table
-	(allocated with xmalloc); iterate through it at the same time as
-	we iterate through the opcodes.
-
-2002-11-18  Klee Dienes  <kdienes@apple.com>
-
-	* h8300-dis.c: Include libiberty.h (for xmalloc).
-	(struct h8_instruction): New type, used to wrap h8_opcodes with a
-	length field (computed at run-time).
-	(h8_instructions): New variable.
-	(bfd_h8_disassemble_init): Allocate the storage for
-	h8_instructions.  Fill h8_instructions with pointers to the
-	appropriate opcode and the correct value for the length field.
-	(bfd_h8_disassemble): Iterate through h8_instructions instead of
-	h8_opcodes.
-
-2002-11-18  Klee Dienes  <kdienes@apple.com>
-
-	* arc-opc.c (arc_ext_opcodes): Define.
-	(arc_ext_operands): Define.
-	* i386-dis.c (Suffix3DNow): Declare as const.
-	* arm-opc.h (arm_opcodes): Declare as const.
-	(thumb_opcodes): Declare as const.
-	* h8500-opc.h (h8500_table): Declare as const.
-	(h8500_table): Use a NULL for the opcode in the terminator, so
-	that code testing (opcode->name) behaves correctly.
-	* mcore-opc.h (mcore_table): Declare as const.
-	* sh-opc.h (sh_table): Declare as const.
-	* w65-opc.h (optable): Declare as const.
-	* z8k-opc.h (z8k_table): Declare as const.
-
-2002-11-18  Svein E. Seldal  <Svein.Seldal@solidas.com>
-
-	* tic4x-dis.c: Added support for enhanced and special insn.
-	(c4x_print_op): Added insn class 'i' and 'j'
-	(c4x_hash_opcode_special): Add to support special insn
-	(c4x_hash_opcode): Update to support the new opcode-list
-	format. Add support for the new special insns.
-	(c4x_disassemble): New opcode-list support.
-
-2002-11-16  Klee Dienes  <kdienes@apple.com>
-
-	* m88k-dis.c: Include libiberty.h (for xmalloc).
-	(HASHTAB): New type, used to build instruction hash tables.
-	Contains a pointer to an INSTAB and a pointer to the next hash
-	chain entry.
-	(instructions): Move definition from m88k.h; remove initialization
-	of 'next' field.
-	(hashtable): Now an aray of pointer-to-HASHTAB, not INSTAB.
-	(printop): Mark pointer to OPSPEC as const.
-	(install): Remove; fold into init_disasm.
-	(m88kdis): Update to ihashtab_initialized to 1 after calling
-	init_disasm.  entry_ptr now iterates through HASHTABs, not
-	INSTABs.
-	(init_disasm): Iterate through the instructions and add to
-	hashtable[].
-
-2002-11-16  Svein E. Seldal  <Svein.Seldal@solidas.com>
-
-	* tic4x-dis.c: (c4x_print_op): Add support for the new argument
-	  format. Fix bug in 'N' register printer.
-
-2002-11-12  Segher Boessenkool  <segher@koffie.nl>
-
-	* ppc-dis.c (print_insn_powerpc): Correct condition register display.
-
-2002-11-07  Aldy Hernandez  <aldyh@redhat.com>
-
-	* ppc-opc.c (EVUIMM_4): Change bit size to 32.
-	(EVUIMM_2): Same.
-	(EVUIMM_8): Same.
-
-2002-11-07  Klee Dienes  <kdienes@apple.com>
-
-	 * Makefile.am (ia64-asmtab.c): Update to use the new '--srcdir'
-	 argument to ia64-gen.
-	 Regenerate dependencies for ia64-len.lo.
-	 * Makefile.in: Regenerate.
-	 * ia64-gen.c: Convert to use getopt().  Add the standard GNU
-	 options, as well as '--srcdir', which controls the directory in
-	 which ia64-gen looks for the sources it uses to generate the
-	 output table.  Add a 'const' to the declaration of the final
-	 output table.  Call xmalloc_set_program_name to set the program
-	 name.
-	 * ia64-asmtab.c: Regenerate.
-
-2002-11-07  Nick Clifton  <nickc@redhat.com>
-
-	* ia64-gen.c: Fix comment formatting and compile time warnings.
-	* ia64-opc-a.c: Fix compile time warnings.
-	* ia64-opc-b.c: Likewise.
-	* ia64-opc-d.c: Likewise.
-	* ia64-opc-f.c: Likewise.
-	* ia64-opc-i.c: Likewise.
-	* ia64-opc-m.c: Likewise.
-	* ia64-opc-x.c: Likewise.
-
-2002-11-06  Aldy Hernandez  <aldyh@redhat.com>
-
-	* ppc-opc.c: Change RD to RS for evmerge*.
-
-2002-10-07  Nathan Tallent  <eraxxon@alumni.rice.edu>
-
-	* sparc-opc.c (sparc_opcodes) <fb, fba, fbe, fbz, fbg, fbge,
-	fbl, fble, fblg, fbn, fbne, fbnz, fbo, fbu, fbue, fbug, fbuge,
-	fbul, fbule>: Add conditional/unconditional branch
-	classification.
-
-2002-10-13  Stephane Carrez  <stcarrez@nerim.fr>
-
-	* m68hc11-dis.c (print_insn): Treat bitmask and branch operands
-	at the end.
-
-2002-09-30  Gavin Romig-Koch  <gavin@redhat.com>
-	    Ken Raeburn  <raeburn@cygnus.com>
-	    Aldy Hernandez  <aldyh@redhat.com>
-	    Eric Christopher  <echristo@redhat.com>
-	    Richard Sandiford  <rsandifo@redhat.com>
-
-	* mips-dis.c (print_insn_arg): Handle '[', ']', 'e' and '%'.
-	(mips_isa_type): Handle bfd_mach_mips4120, bfd_mach_mips5400
-	and bfd_mach_mips5500.
-	* mips-opc.c (V1): Include INSN_4111 and INSN_4120.
-	(N411, N412, N5, N54, N55): New convenience defines.
-	(mips_builtin_opcodes): Add vr4120, vr5400 and vr5500 opcodes.
-	Change dmadd16 and madd16 from V1 to N411.
-
-2002-09-26  Thiemo Seufer <seufer@csv.ica.uni-stuttgart.de>
-
-	* mips-dis.c (print_insn_mips): Always allow disassembly of
-	32-bit jalx opcode.
-
-2002-09-24  Nick Clifton  <nickc@redhat.com>
-
-	* po/de.po: Updated German translation.
-
-2002-09-21  Alan Modra  <amodra@bigpond.net.au>
-
-	* Makefile.am: Run "make dep-am".
-	* Makefile.in: Regenerate.
-	* po/POTFILES.in: Regenerate.
-
-2002-09-20  Nick Clifton  <nickc@redhat.com>
-
-	* ppc-opc.c (CRFD, CRFS): Add PPC_OPERAND_CR flag so that cr
-	register names are accepted.
-
-2002-09-17  Svein E. Seldal  <Svein.Seldal@solidas.com>
-
-	* tic4x-dis.c: Add function declarations and ATTRIBUTE_UNUSED.
-	Convert functions to K&R format.
-
-2002-09-13  Nick Clifton  <nickc@redhat.com>
-
-	* ppc-opc.c (MFDEC2): Include Book-E.
-	(PPCCHLK64): New opcode mask.
-	(evsubw, evsubiw, evmr, evnot, isellt, iselgt, iseleq, mfpid,
-	mfcsrr0, mfcsrr1, mfdear, mfesr, mfivpr, mfusprg0, mftbl,
-	mftbu, mfpir, mfdbsr, mfdbcr0, mfdbcr1, mfdbcr2, mfiac1,
-	mfiac2, mfiac3, mfiac4, mfdac1, mfdac2, mfdvc1, mfdvc2, mftsr,
-	mftcr, mfivor0, mfivor1, mfivor2, mfivor3, mfivor4, mfivor5,
-	mfivor6, mfivor7, mfivor8, mfivor9, mfivor10, mfivor11,
-	mfivor12, mfivor13, mfivor14, mfivor15, mfbbear, mfmcsrr0,
-	mfmcsrr1, mfmcsr, mtpid, mtdecar, mtcsrr0, mtcsrr1, mtdear,
-	mtesr, mtivpr, mtusprg0, mtsprg4, mtsprg5, mtsprg6, mtsprg7,
-	mtdbsr, mtdbcr0, mtdbcr1, mtdbcr2, mtiac1, mtiac2, mtiac3,
-	mtiac4, mtdac1, mtdac2, mtdvc1, mtdvc2, mttsr, mttcr, mtivor0,
-	mtivor1, mtivor2, mtivor3, mtivor4, mtivor5, mtivor6, mtivor7,
-	mtivor8, mtivor9, mtivor10, mtivor11, mtivor12, mtivor13,
-	mtivor14, mtivor15, mtbbear, mtmcsrr0, mtmcsrr1, mtmcsr): New
-	Book-E instructions.
-	(evfsneg): Fix opcode value.
-	(dcbtstlse, dcbtlse, icblce, dcblce, icbtsle): Use PPCCHLK64
-	mask.
-	(mcrxr64, tlbivaxe, tlbsxe, tlbsxe.): Restrict to 64-bit
-	Book-E.
-	(extsw): Restrict to 64-bit PPC instruction sets.
-	(extsw.): Does not exist in 64-bit Book-E.
-	(powerpc_macro): Remove mftbl, mftbu and mftb Book-E macros as
-	they are no longer needed.
-
-2002-09-12  Gary Hade  <garyhade@us.ibm.com>
-
-	* ppc-dis.c (powerpc_dialect): Add missing PPC_OPCODE_CLASSIC.
-
-2002-09-11  Nick Clifton  <nickc@redhat.com>
-
-	* po/da.po: Updated Danish translation file.
-
-2002-09-04  Nick Clifton  <nickc@redhat.com>
-
-	* ppc-opc.c (extsw, extsw.): Do not allow for the BookE32.
-
-2002-09-04  Nick Clifton  <nickc@redhat.com>
-
-	* disassemble.c (disassembler_usage): Add invocation of
-	print_ppc_disassembler_options.
-	* ppc-dis.c (print_ppc_disassembler_options): New function.
-
-2002-09-04  Nick Clifton  <nickc@redhat.com>
-
-	* ppc-opc.c: The BookE implementations of the TLBWE and TLBRE
-	instructions do not take any arguments.
-
-2002-09-02  Nick Clifton  <nickc@redhat.com>
-
-	* v850-opc.c: Remove redundant references to V850EA architecture.
-
-2002-09-02  Alan Modra  <amodra@bigpond.net.au>
-
-	* arc-opc.c: Include bfd.h.
-	(arc_get_opcode_mach): Subtract off base bfd_mach value.
-
-2002-08-30  Alan Modra  <amodra@bigpond.net.au>
-
-	* v850-dis.c (disassemble): Remove bfd_mach_v850ea case.
-
-	* mips-dis.c (_print_insn_mips): Don't use hard-coded mach constants.
-
-2002-08-28  Svein E. Seldal  <Svein.Seldal@solidas.com>
-
-	* configure.in: Added bfd_tic4x_arch.
-	* configure: Regenerate.
-	* Makefile.am: Added tic4x-dis.o target.
-	* Makefile.in: Regenerate.
-
-2002-08-28  Michael Hayes <m.hayes@elec.canterbury.ac.nz>
-
-	* disassemble.c: Added tic4x target and c4x
-	disassembler routine.
-	* tic4x-dis.c: New file.
-
-2002-08-16  Christian Groessler <chris@groessler.org>
-
-	* z8k-dis.c (unparse_instr): case CLASS_BA: Designate hex
-	values as those.
-	* z8kgen.c (opt): Fix definition of "in rd,imm16" opcode.
-	* z8k-opc.h: Regenerated with new z8kgen.c.
-
-2002-08-19  Elena Zannoni  <ezannoni@redhat.com>
-
-	From  matthew green  <mrg@redhat.com>
-
-	* ppc-dis.c (powerpc_dialect): Support `-m500', `-m500x2' and
-	`-mefs'. Turn off AltiVec for E500 and efs.
-	(print_insn_powerpc): Don't print an AltiVec instruction if the
-	dialect is not efs.
-
-	* ppc-opc.c (insert_pmrn, extract_pmrn, insert_ev2, extract_ev2,
-	insert_ev4, extract_ev4, insert_ev8, extract_ev8): New functions
-	for extracting pmrn/evld/evstd/etc operands.
-	(CRB, CRFD, CRFS, DC, RD): New instruction fields.
-	(CT): Make this equal to RD + 1.
-	(PMRN): New operand.
-	(RA): Update.
-	(EVUIMM, EVUIMM_2, EVUIMM_4, EVUIMM_8): New operands.
-	(WS): Update.
-	(EVSEL, EVSEL_MASK): New instruction form and mask for EVSEL.
-	(ISEL, ISEL_MASK): New instruction form and mask for ISEL.
-	(XISEL, XISEL_MASK): New instruction form and mask for ISEL.
-	(CTX, CTX_MASK): New instruction form and mask for context cache
-	instructions.
-	(UCTX, UCTX_MASK): New instruction form and mask for user context
-	cache instructions.
-	(XC, XC_MASK, XUC, XUC_MASK): New instruction forms.
-	(CLASSIC): New define.
-	(PPCESPE): New define.
-	(PPCISEL, , PPCBRLK, PPCPMR, PPCCHLK, PPCRFMI): New
-	defines for integer select, cache control, branch
-	locking, power management, cache locking and machine check
-	APU instructions, respectively.
-	(efsabs, efsnabs, efsneg, efsadd, efssub, efsmul,
-	efsdiv, efscmpgt, efscmplt, efscmpeq, efststgt, efststlt,
-	efststeq, efscfui, efsctuiz, efscfsi, efscfuf, efscfsf,
-	efsctui, efsctsi, efsctsiz, efsctuf, efsctsf,
-	evaddw, evaddiw, evsubfw, evsubifw, evabs, evneg, evextsb,
-	evextsh, evrndw, evcntlzw, evcntlsw, brinc, evand, evandc, evor,
-	evorc, evxor, eveqv, evnand, evnor, evrlw, evrlwi, evslw, evslwi,
-	evsrws, evsrwu, evsrwis, evsrwiu, evsplati, evsplatfi, evmergehi,
-	evmergelo, evmergehilo, evmergelohi, evcmpgts, evcmpgtu, evcmplts,
-	evcmpltu, evcmpeq, evsel, evldd, evlddx, evldw, evldwx, evldh,
-	evldhx, evlwhe, evlwhex, evlwhou, evlwhoux, evlwhos, evlwhosx,
-	evlwwsplat, evlwwsplatx, evlwhsplat, evlwhsplatx, evlhhesplat,
-	evlhhesplatx, evlhousplat, evlhousplatx, evlhossplat, evlhossplatx,
-	evstdd, evstddx, evstdw, evstdwx, evstdh, evstdhx, evstwwe,
-	evstwwex, evstwwo, evstwwox, evstwhe, evstwhex, evstwho, evstwhox,
-	evfsabs, evfsnabs, evfsneg, evfsadd, evfssub, evfsmul, evfsdiv,
-	evfscmpgt, evfscmplt, evfscmpeq, evfststgt, evfststlt, evfststeq,
-	evfscfui, evfsctuiz, evfscfsi, evfscfuf, evfscfsf, evfsctui,
-	evfsctsi, evfsctsiz, evfsctuf, evfsctsf, evsabs, evsnabs, evsneg,
-	evsadd, evssub, evsmul, evsdiv, evscmpgt, evsgmplt, evsgmpeq,
-	evststgt, evststlt, evststeq, evscfui, evscfsi, evscfuf, evscfsf,
-	evsctui, evsctuiz, evsctsi, evsctsiz, evsctuf, evsctsf, evmhossf,
-	evmhossfa, evmhosmf, evmhosmfa, evmhosmi, evmhosmia, evmhoumi,
-	evmhoumia, evmhessf, evmhessfa, evmhesmf, evmhesmfa, evmhesmi,
-	evmhesmia, evmheumi, evmheumia, evmhossfaaw, evmhossiaaw,
-	evmhosmfaaw, evmhosmiaaw, evmhousiaaw, evmhoumiaaw, evmhessfaaw,
-	evmhessiaaw, evmhesmfaaw, evmhesmiaaw, evmheusiaaw, evmheumiaaw,
-	evmhossfanw, evmhossianw, evmhosmfanw, evmhosmianw, evmhousianw,
-	evmhoumianw, evmhessfanw, evmhessianw, evmhesmfanw, evmhesmianw,
-	evmheusianw, evmheumianw, evmhogsmfaa, evmhogsmiaa, evmhogumiaa,
-	evmhegsmfaa, evmhegsmiaa, evmhegumiaa, evmhogsmfan, evmhogsmian,
-	evmhogumian, evmhegsmfan, evmhegsmian, evmhegumian, evmwhssf,
-	evmwhssfa, evmwhssfaa, evmwhssmaa, evmwhsmfaa, evmwhsmiaa,
-	evmwhusiaa, evmwhumiaa, evmwhssfan, evmwhssian, evmwhsmfan,
-	evmwhsmian, evmwhusian, evmwhumian, evmwhgssfaa, evmwhgsmfaa,
-	evmwhgsmiaa, evmwhgumiaa, evmwhgssfan, evmwhgsmfan, evmwhgsmian,
-	evmwhgumian, evmwhsmf, evmwhsmfa, evmshsmi, evmshsmia, evmshumi,
-	evmshumia, evmmlssf, evmmlssfa, evmwlsmf, evmwlsmfa, evmwlumi,
-	evmwlumia, evmwlssfaaw, evmwlssiaaw, evmwlsmfaaw, evmwlsmiaaw,
-	evmwlusiaaw, evmwlumiaaw, evmwissfanw, evmwissianw, evmwlsmfanw,
-	evmwlsmianw, evmwlusianw, evmwlumianw, evmwssf, evmwssfa,
-	evmwsmf, evmwsmfa, evmwsmi, evmwsmia, evmwumi, evmwumia,
-	evmwssfaa, evmwsmfaa, evmwsmiaa, evmwumiaa, evmwssfan, evmwsmfan,
-	evmwsmian, evmwumian, evaddssiaaw, evaddsmiaaw, evaddusiaaw,
-	evaddumiaaw, evsubfssiaaw, evsubfsmiaaw, evsubfusiaaw,
-	evsubfumiaaw, evmra, evdivws, evdivws): New e500x2 Core Complex
-	instructions.
-	(rfmci): New machine check APU instruction.
-	(isel): New integer select APU instructino.
-	(icbtls, icbtlse, icblc, icblce, dcbtls, dcbtlse, dcbtstls,
-	dcbtstlse, dcblc, dcblce): New cache control APU instructions.
-	(mtspefscr, mfspefscr): New instructions.
-	(mfpmr, mtpmr): New performance monitor APU instructions.
-	(savecontext): New context cache APU instructions.
-	(bblels, bbelr): New branch locking APU instructions.
-	(bblels, bbelr): New instructions.
-	(mftbl, mftbu, mftb): Set as CLASSIC instructions.  Add BOOKE alias.
-
-2002-08-13  Stephane Carrez  <stcarrez@nerim.fr>
-
-	* m68hc11-opc.c: Update call operand to accept the page definition.
-	Identify instructions that are branches and calls to generate a
-	RL_JUMP relocation.
-
-2002-08-13  Stephane Carrez  <stcarrez@nerim.fr>
-
-	* m68hc11-dis.c (print_insn): Take into account 68HC12 memory
-	banks and fix disassembling of call instruction.
-	(print_indexed_operand): New param to tell whether
-	it was an indirect addressing operand (for disassembling call).
-
-2002-08-09  Nick Clifton  <nickc@redhat.com>
-
-	* po/sv.po: Updated Swedish translation.
-
-2002-08-08  Maciej W. Rozycki  <macro@ds2.pg.gda.pl>
-
-	* mips-opc.c (mips_builtin_opcodes): Remove "dla" and "la" as
-	aliases to "daddiu" and "addiu".
-
-2002-07-30  Nick Clifton  <nickc@redhat.com>
-
-	* po/sv.po: Updated Swedish translation.
-
-2002-07-25  Nick Clifton  <nickc@redhat.com>
-
-	* po/sv.po: Updated Swedish translation.
-	* po/es.po: Updated Spanish translation.
-	* po/pr_BR.po: Updated Brazilian Portuguese translation.
-	* po/tr.po: Updated Turkish translation.
-	* po/fr.po: Updated French translation.
-
-2002-07-24  Nick Clifton  <nickc@redhat.com>
-
-	* po/sv.po: Updated Swedish translation.
-	* po/es.po: Updated Spanish translation.
-	* po/pr_BR.po: Updated Brazilian Portuguese translation.
-
-2002-07-23  Alan Modra  <amodra@bigpond.net.au>
-
-	* Makefile.am: Run "make dep-am".
-	* Makefile.in: Regenerate.
-	* po/POTFILES.in: Regenerate.
-
-2002-07-23  Nick Clifton  <nickc@redhat.com>
-
-	* po/fr.po: Updated French translation.
-	* po/pr_BR.po: New Brazilian Portuguese translation.
-	* po/id.po: Updated Indonesian translation.
-	* configure.in (LINGUAS): Add pr_BR.
-	* configure: Regenerate.
-
-2002-07-18  Denis Chertykov  <denisc@overta.ru>
-	    Frank Ch. Eigler  <fche@redhat.com>
-	    Alan Lehotsky <alehotsky@cygnus.com>
-	    matthew green  <mrg@redhat.com>
-
-	* configure.in: Add support for ip2k.
-	* configure: Regenerate.
-	* Makefile.am: Add support for ip2k.
-	* Makefile.in: Regenerate.
-	* disassemble.c: Add support for ip2k.
-	* ip2k-asm.c: New generated file.
-	* ip2k-desc.c: New generated file.
-	* ip2k-desc.h: New generated file.
-	* ip2k-dis.c: New generated file.
-	* ip2k-ibld.c: New generated file.
-	* ip2k-opc.c: New generated file.
-	* ip2k-opc.h: New generated file.
-
-2002-07-17  David Mosberger  <davidm@hpl.hp.com>
-
-	* ia64-opc-b.c (bWhc): New macro.
-	(mWhc): Ditto.
-	(OpPaWhcD): Ditto.
-	(ia64_opcodes_b): Correct patterns for indirect call
-	instructions to use 3-bit "wh" field.
-	* ia64-asmtab.c: Regnerate.
-
-2002-07-09  Thiemo Seufer <seufer@csv.ica.uni-stuttgart.de>
-
-	* mips-dis.c (mips_isa_type): Add MIPS16 insn handling.
-	* mips-opc.c (I16): New define.
-	(mips_builtin_opcodes): Make jalx an I16 insn.
-
-2002-06-18  Dave Brolley  <brolley@redhat.com>
-
-	* po/POTFILES.in: Add frv-*.[ch].
-	* disassemble.c (ARCH_frv): New macro.
-	(disassembler): Handle bfd_arch_frv.
-	* configure.in: Support frv_bfd_arch.
-	* Makefile.am (HFILES): Add frv-*.h.
-	(CFILES): Add frv-*.c
-	(ALL_MACHINES): Add frv-*.lo.
-	(CLEANFILES): Add stamp-frv.
-	(FRV_DEPS): New variable.
-	(stamp-frv): New target.
-	(frv-asm.lo): New target.
-	(frv-desc.lo): New target.
-	(frv-dis.lo): New target.
-	(frv-ibld.lo): New target.
-	(frv-opc.lo): New target.
-	(frv-*.[ch]): New files.
-
-2002-06-18  Ben Elliston  <bje@redhat.com>
-
-	* Makefile.am (CGENDEPS): Remove unnecessary stamp-cgen.
-	* Makefile.in: Regenerate.
-
-2002-06-08  Alan Modra  <amodra@bigpond.net.au>
-
-	* a29k-dis.c: Replace CONST with const.
-	* h8300-dis.c: Likewise.
-	* m68k-dis.c: Likewise.
-	* or32-dis.c: Likewise.
-	* sparc-dis.c: Likewise.
-
-2002-06-04  Jason Thorpe  <thorpej@wasabisystems.com>
-
-	* configure.in: Add "sh5*-*" to list of targets which include
-	sh64 support.
-	* configure: Regenerate.
-
-2002-05-31  Chris G. Demetriou  <cgd@broadcom.com>
-
-	* mips-opc.c: Clean up a few whitespace issues, and sort a
-	few entries understanding that 'x' follows 'w' in the alphabet.
-
-2002-05-31  Chris G. Demetriou  <cgd@broadcom.com>
-	    Ed Satterthwaite  <ehs@broadcom.com>
-
-	* mips-opc.c: Add support for SB-1 MDMX subset and extensions.
-
-2002-05-31  Alan Modra  <amodra@bigpond.net.au>
-
-	* Makefile.am: Run "make dep-am".
-	* Makefile.in: Regenerate.
-	* po/POTFILES.in: Regenerate.
-
-2002-05-30  Chris G. Demetriou  <cgd@broadcom.com>
-	    Ed Satterthwaite  <ehs@broadcom.com>
-
-	* mips-dis.c (print_insn_arg): Add support for 'O', 'Q', 'X', 'Y',
-	and 'Z' formats, for MDMX.
-	(mips_isa_type): Add MDMX instructions to the ISA
-	bit mask for bfd_mach_mipsisa64.
-	* mips-opc.c: Add support for MDMX instructions.
-	(MX): New definition.
-
-	* mips-dis.c: Update copyright years to include 2002.
-
-2002-05-30  Diego Novillo  <dnovillo@redhat.com>
-
-	* d10v-opc.c (d10v_opcodes): `btsti' does not modify its
-	arguments.
-
-2002-05-28  Kuang Hwa Lin <kuang@sbcglobal.net>
-
-	* configure.in: Add DLX configuraton support.
-	* configure: Regenerate.
-	* Makefile.am: Add DLX configuraton support.
-	* Makefile.in: Regenerate.
-	* disassemble.c: Add DLX support.
-	* dlx-dis.c: New file.
-
-2002-05-25  Alan Modra  <amodra@bigpond.net.au>
-
-	* Makefile.am (sh-dis.lo): Don't put make commands in deps.
-	* Makefile.in: Regenerate.
-	* arc-dis.c: Use #include "" instead of <> for local header files.
-	* m68k-dis.c: Likewise.
-
-2002-05-22  J"orn Rennecke <joern.rennecke@superh.com>
-
-	* Makefile.am (sh-dis.lo): Compile with @archdefs@.
-	* Makefile.in: regenerate.
-
-	* sh-dis.c (print_insn_sh): If coff and bfd_mach_sh, use arch_sh4
-	for disassembly.
-
-2002-05-22  Thiemo Seufer <seufer@csv.ica.uni-stuttgart.de>
-
-	* mips-opc.c (mips_builtin_opcodes): Add drol, dror macros.
-
-2002-05-17  J"orn Rennecke <joern.rennecke@superh.com>
-
-	* disassemble.c (disassembler): Just use print_insn_sh for bfd_arch_sh.
-	* sh-dis.c (LITTLE_BIT): Delete.
-	(print_insn_sh, print_insn_shl): Deleted.
-	(print_insn_shx): Renamed to
-	(print_insn_sh).  No longer static.  Handle SHmedia instructions.
-	Use info->endian to determine endianness.
-	* sh64-dis.c (print_insn_sh64, print_insn_sh64l): Delete.
-	(print_insn_sh64x): No longer static.  Renamed to
-	(print_insn_sh64).  Removed pfun_compact and endian arguments.
-	If we got an uneven address to indicate SHmedia, adjust it.
-	Return -2 for SHcompact instructions.
-
-2002-05-17  Alan Modra  <amodra@bigpond.net.au>
-
-	* acinclude.m4 (AM_INSTALL_LIBBFD): Fake to fool autotools.
-	* configure.in: Invoke AM_INSTALL_LIBBFD.
-	* Makefile.am (install-data-local): Move to..
-	(install_libopcodes): .. New target.
-	(uninstall_libopcodes): Likewise.
-	(install-bfdlibLTLIBRARIES): Likewise.
-	(uninstall-bfdlibLTLIBRARIES): Likewise.
-	(bfdlibdir): New.
-	(bfdincludedir): New.
-	(lib_LTLIBRARIES): Rename to bfdlib_LTLIBRARIES.
-	* aclocal.m4: Regenerate.
-	* configure: Regenerate.
-	* Makefile.in: Regenerate.
-
-2002-05-15  Nick Clifton  <nickc@cambridge.redhat.com>
-
-	* fr30-asm.c: Regenerate.
-	* fr30-desc.c: Regenerate.
-	* fr30-dis.c: Regenerate.
-	* m32r-asm.c: Regenerate.
-	* m32r-desc.c: Regenerate.
-	* m32r-dis.c: Regenerate.
-	* openrisc-asm.c: Regenerate.
-	* openrisc-desc.c: Regenerate.
-	* openrisc-dis.c: Regenerate.
-	* xstormy16-asm.c: Regenerate.
-	* xstormy16-desc.c: Regenerate.
-	* xstormy16-dis.c: Regenerate.
-
-2002-05-15  Thiemo Seufer <seufer@csv.ica.uni-stuttgart.de>
-
-	* mips-dis.c (is_newabi): EABI is not a NewABI.
-
-2002-05-13  Jason Thorpe  <thorpej@wasabisystems.com>
-
-	* configure.in (shle-*-*elf*): Include sh64 support.
-	* configure: Regenerate.
-
-2002-04-28  Jason Thorpe  <thorpej@wasabisystems.com>
-
-	* vax-dis.c (print_insn_arg): Pass the insn info to print_insn_mode.
-	(print_insn_mode): Print some basic info about floating point values.
-
-2002-05-09  Anton Blanchard  <anton@samba.org>
-
-	* ppc-opc.c: Add "tlbiel" for POWER4.
-
-2002-05-07  Graydon Hoare  <graydon@redhat.com>
-
-	* cgen-dis.in: (print_insn_@arch@): Cache list of opened CPUs rather
-	than just most-recently-opened.
-
-2002-05-01  Alan Modra  <amodra@bigpond.net.au>
-
-	* ppc-opc.c: Add "tlbsx." and "tlbsxe." for booke.
-
-2002-04-24  Christian Groessler <chris@groessler.org>
-
-	* z8k-dis.c (print_insn_z8k): Set disassemble_info to 2
-	bytes_per_chunk, 6 bytes_per_line for nicer display of the hex
-	codes.
-	(z8k_lookup_instr): CLASS_IGNORE case added.
-	(output_instr): Don't print hex codes, they are already
-	printed.
-	(unpack_instr): ARG_NIM4 case added.  ARG_NIM8 case
-	fixed. Support CLASS_BIT_1OR2 and CLASS_IGNORE cases.
-	(unparse_instr): Fix base and indexed addressing disassembly:
-	The index is inside the brackets.
-	* z8kgen.c (gas): Add ARG_NIM4 and CLASS_IGNORE defines.
-	(opt): Fix shift left/right arithmetic/logical byte defines:
-	The high byte of the immediate word is ignored by the
-	processor.
-	Fix n parameter of ldm opcodes: The opcode contains (n-1).
-	(args): Fix "n" entry.
-	(toks): Add "nim4" and "iiii" entries.
-	* z8k-opc.h: Regenerated with new z8kgen.c.
-
-2002-04-24  Nick Clifton  <nickc@cambridge.redhat.com>
-
-	* po/id.po: New Indonesian translation.
-	* configure.in (ALL_LIGUAS): Add id.po
-	* configure: Regenerate.
-
-2002-04-17  matthew green  <mrg@redhat.com>
-
-	* ppc-opc.c (powerpc_opcode): Fix dssall operand list.
-
-2002-04-04  Alan Modra  <amodra@bigpond.net.au>
-
-	* dep-in.sed: Cope with absolute paths.
-	* Makefile.am (dep.sed): Subst TOPDIR.
-	Run "make dep-am".
-	* Makefile.in: Regenerate.
-	* ppc-opc.c: Whitespace.
-	* s390-dis.c: Fix copyright date.
-
-2002-03-23  matthew green  <mrg@redhat.com>
-
-	* ppc-opc.c (vmaddfp): Fix operand order.
-
-2002-03-21  Alan Modra  <amodra@bigpond.net.au>
-
-	* Makefile.am: Run "make dep-am".
-	* Makefile.in: Regenerate.
-
-2002-03-21  Anton Blanchard  <anton@samba.org>
-
-	* ppc-opc.c: Add optional field to mtmsrd.
-	(MTMSRD_L, XRLARB_MASK): Define.
-
-2002-03-18  Jan Hubicka  <jh@suse.cz>
-
-	* i386-dis.c (prefix_name): Fix handling of 32bit address prefix
-	in 64bit mode.
-	(print_insn) Likewise.
-	(putop): Fix handling of 'E'
-	(OP_E, OP_OFF): handle 32bit addressing mode in 64bit.
-	(ptr_reg): Likewise.
-
-2002-03-18  Nick Clifton  <nickc@cambridge.redhat.com>
-
-	* po/fr.po: Updated version.
-
-2002-03-16  Chris Demetriou  <cgd@broadcom.com>
-
-	* mips-opc.c (M3D): Tweak comment.
-	(mips_builtin_op): Add comment indicating that opcodes of the
-	same name must be placed together in the table, and sort
-	the "recip.fmt", "recip1.fmt", "recip2.fmt", "rsqrt.fmt",
-	"rsqrt1.fmt", and "rsqrt2.fmt" opcodes by name.
-
-2002-03-16  Nick Clifton  <nickc@cambridge.redhat.com>
-
-	* Makefile.am: Tidy up sh64 rules.
-	* Makefile.in: Regenerate.
-
-2002-03-15  Chris G. Demetriou  <cgd@broadcom.com>
-
-	* mips-dis.c: Update copyright years.
-
-2002-03-15  Chris G. Demetriou  <cgd@broadcom.com>
-
-	* mips-dis.c (mips_isa_type): Add MIPS3D instructions to the ISA
-	bit masks for bfd_mach_mips_sb1 and bfd_mach_mipsisa64.  Add
-	comments for bfd_mach_mipsisa32 and bfd_mach_mipsisa64 that
-	indicate that they should dissassemble all applicable
-	MIPS-specified ASEs.
-	* mips-opc.c: Add support for MIPS-3D instructions.
-	(M3D): New definition.
-
-	* mips-opc.c: Update copyright years.
-
-2002-03-15  Chris G. Demetriou  <cgd@broadcom.com>
-
-	* mips-opc.c (mips_builtin_opcodes): Sort bc<N> opcodes by name.
-
-2002-03-15  Chris Demetriou  <cgd@broadcom.com>
-
-	* mips-dis.c (is_newabi): Fix ABI decoding.
-
-2002-03-14  Chris G. Demetriou  <cgd@broadcom.com>
-
-	* mips-dis.c (mips_isa_type): Fix formatting of bfd_mach_mipsisa32
-	and bfd_mach_mipsisa64 cases to match the rest.
-
-2002-03-13  Nick Clifton  <nickc@cambridge.redhat.com>
-
-	* po/fr.po: Updated version.
-
-2002-03-13  Alan Modra  <amodra@bigpond.net.au>
-
-	* ppc-opc.c: Add optional `L' field to tlbie.
-	(XRTLRA_MASK): Define.
-
-2002-03-06  Chris Demetriou  <cgd@broadcom.com>
-
-	* mips-opc.c (mips_builtin_opcodes): Mark "pref" as being
-	present on I4.
-
-	* mips-opc.c (mips_builtin_opcodes): Add "movn.ps" and "movz.ps".
-
-2002-03-05  Paul Koning  <pkoning@equallogic.com>
-
-	* pdp11-opc.c: Fix "mark" operand type.  Fix operand types
-	for float opcodes that take float operands.  Add alternate
-	names (xxxD vs. xxxF) for float opcodes.
-	* pdp11-dis.c (print_operand): Clean up formatting for mode 67.
-	(print_foperand): New function to handle float opcode operands.
-	(print_insn_pdp11): Use print_foperand to disassemble float ops.
-
-2002-02-27  Nick Clifton  <nickc@cambridge.redhat.com>
-
-	* po/de.po: Updated.
-
-2002-02-26  Brian Gaeke  <brg@dgate.org>
-
-	* Makefile.am (install-data-local): Install dis-asm.h.
-
-2002-02-26  Nick Clifton  <nickc@cambridge.redhat.com>
-
-	* configure.in (LINGUAS): Add de.po.
-	* configure: Regenerate.
-	* po/de.po: New file.
-
-2002-02-25  Alan Modra  <amodra@bigpond.net.au>
-
-	* ppc-dis.c (powerpc_dialect): Handle power4 option.
-	* ppc-opc.c (insert_bdm): Correct description of "at" branch
-	hints.  Test PPC_OPCODE_POWER4 to determine branch hint flavour.
-	(extract_bdm, insert_bdp, extract_bdp, valid_bo): Likewise.
-	(BOFM64, BOFP64, BOTM64, BOFP64): Rename to BOFM4, BOFP4 etc.
-	(BODNZM64, BODNZP64, BODZM64, BODZP64): Likewise.
-	(PPCCOM32, PPCCOM64): Delete.
-	(NOPOWER4, POWER4): Define.
-	(powerpc_opcodes): Replace occurences of PPCCOM32 with NOPOWER4,
-	and PPCCOM4 with POWER4 so that "at" style branch hint opcodes
-	are enabled for power4 rather than ppc64.
-
-2002-02-20  Tom Rix  <trix@redhat.com>
-
-	* ppc-opc.c (powerpc_operands): Add WS field.  Use for tlbre, tlbwe.
-
-2002-02-19  Martin Schwidefsky  <schwidefsky@de.ibm.com>
-
-	* s390-dis.c (init_disasm): Use renamed architecture defines.
-
-2002-02-19  matthew green  <mrg@redhat.com>
-
-	* ppc-opc.c (powerpc_dialect): Fix comment; BookE is not Motorola
-	specific.
-
-2002-02-18  Nick Clifton  <nickc@cambridge.redhat.com>
-
-	* po/tr.po: Updated translation.
-
-2002-02-15  Richard Henderson  <rth@redhat.com>
-
-	* alpha-opc.c (alpha_opcodes): Fix thinko in ret pseudo
-	disassembly mask.
-
-2002-02-15  Richard Henderson  <rth@redhat.com>
-
-	* alpha-opc.c (alpha_opcodes): Add simple pseudos for
-	lda, ldah, jmp, ret.
-
-2002-02-14  Nick Clifton  <nickc@cambridge.redhat.com>
-
-	* po/da.po: Updated translation.
-
-2002-02-12  Graydon Hoare  <graydon@redhat.com>
-
-	* cgen-asm.in (parse_insn_normal): Change call from
-	@arch@_cgen_parse_operand to cd->parse_operand, to
-	facilitate CGEN_ASM_INIT_HOOK doing useful work.
-
-2002-02-11  Alexandre Oliva  <aoliva@redhat.com>
-
-	* sparc-dis.c (print_insn_sparc): Make sure 0xFFFFFFFF is not
-	sign-extended.
-
-2002-02-11  Alan Modra  <amodra@bigpond.net.au>
-
-	* Makefile.am: "make dep-am".
-	* Makefile.in: Regenerate.
-	* aclocal.m4: Regenerate.
-	* config.in: Regenerate.
-	* configure: Regenerate.
-
-2002-02-10  Hans-Peter Nilsson  <hp@bitrange.com>
-
-	* configure.in <bfd_sh_arc>: For sh-* and shl-*, enable sh64
-	support only for sh-*-*elf*, shl-*-*elf*, sh-*-linux* and
-	shl-*-linux*.
-	* configure: Regenerate.
-
-2002-02-10  Daniel Jacobowitz  <drow@mvista.com>
-
-	* cgen-dis.c: Add prototypes for count_decodable_bits
-	and add_insn_to_hash_chain.
-
-2002-02-08  Alexandre Oliva  <aoliva@redhat.com>
-
-	* configure.in <bfd_sh_arc>: Enable sh64 support on sh-*.
-	* configure: Rebuilt.
-
-2002-02-08  Ivan Guzvinec <ivang@opencores.org>
-
-	* or32-opc.c: Fix compile time warning messages.
-	* or32-dis.c: Fix compile time warning messages.
-
-2002-02-08  Alexandre Oliva  <aoliva@redhat.com>
-
-	Contribute sh64-elf.
-	2001-10-08  Nick Clifton  <nickc@cambridge.redhat.com>
-	* sh64-opc.c: Regenerate.
-	2001-03-13  DJ Delorie  <dj@redhat.com>
-	* sh64-opc.h: Rename A_RESV_Fx to A_REUSE_PREV so that its
-	purpose is more obvious.
-	* sh64-opc.c (shmedia_table): Ditto.
-	* sh64-dis.c (initialize_shmedia_opcode_mask_table): Ditto.
-	(print_insn_shmedia): Ditto.
-	2001-03-12  DJ Delorie  <dj@redhat.com>
-	* sh64-opc.c: Adjust comments to reflect reality: replace bits
-	3:0 with zeros (not "reserved"), replace "rrrrrr" with
-	"gggggg" for two-operand floating point opcodes.  Remove
-	"fsina".
-	2001-01-08  Hans-Peter Nilsson  <hpn@cygnus.com>
-	* sh64-dis.c (print_insn_shmedia) <failing read_memory_func>:
-	Correct printing of .byte:s.  Return number of printed bytes or
-	-1; never 0.
-	(print_insn_sh64x) <not CRT_SH5_ISA16>: Ditto.  Print as .byte:s
-	to next four-byte-alignment if insn or data is not aligned.
-	2001-01-06  Hans-Peter Nilsson  <hpn@cygnus.com>
-	* sh64-dis.c: Update comments and fix comment formatting.
-	(initialize_shmedia_opcode_mask_table) <case A_IMMM>:
-	Abort instead of setting length to 0.
-	(crange_qsort_cmpb, crange_qsort_cmpl, crange_bsearch_cmpb,
-	crange_bsearch_cmpl, sh64_get_contents_type,
-	sh64_address_in_cranges): Move to bfd/elf32-sh64.c.
-	2001-01-05  Hans-Peter Nilsson  <hpn@cygnus.com>
-	* sh64-opc.c: Remove #if 0:d entries for instructions not found in
-	SH-5/ST50-023-04: fcosa.s, fsrra.s and prefo.
-	2000-12-30  Hans-Peter Nilsson  <hpn@cygnus.com>
-	* sh64-dis.c (print_insn_shmedia): Display MOVI/SHORI-formed
-	address with same prefix as SHcompact.
-	In the disassembler, use a .cranges section for linked executables.
-	* sh64-dis.c (SAVED_MOVI_R, SAVED_MOVI_IMM): Move to head of file
-	and update for using structure in info->private_data.
-	(struct sh64_disassemble_info): New.
-	(is_shmedia_p): Delete.
-	(crange_qsort_cmpb): New function.
-	(crange_qsort_cmpl, crange_bsearch_cmpb): New functions.
-	(crange_bsearch_cmpl, sh64_address_in_cranges): New functions.
-	(init_sh64_disasm_info, sh64_get_contents_type_disasm): New functions.
-	(sh64_get_contents_type, sh64_address_is_shmedia): New functions.
-	(print_insn_shmedia): Correct displaying of address after MOVI/SHORI
-	pair.  Display addresses for linked executables only.
-	(print_insn_sh64x_media): Initialize info->private_data by calling
-	init_sh64_disasm_info.
-	(print_insn_sh64x): Ditto.  Find out type of contents by calling
-	sh64_contents_type_disasm.  Display data regions using ".long" and
-	".byte" similar to unrecognized opcodes.
-	2000-12-19  Hans-Peter Nilsson  <hpn@cygnus.com>
-	* sh64-dis.c (is_shmedia_p): Check info->section and look for ISA
-	information in section flags before considering symbols.  Don't
-	assume an info->mach setting of bfd_mach_sh5 means SHmedia code.
-	* configure.in (bfd_sh_arch): Check presence of sh64 insns by
-	matching $target $canon_targets instead of looking at the
-	now-removed -DINCLUDE_SHMEDIA in $targ_cflags.
-	* configure: Regenerate.
-	2000-11-25  Hans-Peter Nilsson  <hpn@cygnus.com>
-	* sh64-opc.c (shmedia_creg_table): New.
-	* sh64-opc.h (shmedia_creg_info): New type.
-	(shmedia_creg_table): Declare.
-	* sh64-dis.c (creg_name): New function.
-	(print_insn_shmedia): Use it.
-	* disassemble.c (disassembler) [ARCH_sh, INCLUDE_SHMEDIA]: Map
-	bfd_mach_sh5 to print_insn_sh64 if big-endian and to
-	print_insn_sh64l if little-endian.
-	* sh64-dis.c (print_insn_shmedia): Make r unsigned.
-	(print_insn_sh64l): New.
-	(print_insn_sh64x): New.
-	(print_insn_sh64x_media): New.
-	(print_insn_sh64): Break out code to print_insn_sh64x and
-	print_insn_sh64x_media.
-	2000-11-24  Hans-Peter Nilsson  <hpn@cygnus.com>
-	* sh64-opc.h: New file
-	* sh64-opc.c: New file
-	* sh64-dis.c: New file
-	* Makefile.am: Add sh64 targets.
-	(HFILES): Add sh64-opc.h.
-	(CFILES): Add sh64-opc.c and sh64-dis.c.
-	(ALL_MACHINES): Add sh64 files.
-	* Makefile.in: Regenerate.
-	* configure.in: Add support for sh64 to bfd_sh_arch.
-	* configure: Regenerate.
-	* disassemble.c [ARCH_all] (INCLUDE_SHMEDIA): Define.
-	(disassembler) [ARCH_sh, INCLUDE_SHMEDIA]: Map bfd_mach_sh5 to
-	print_insn_sh64.
-	* sh-dis.c (print_insn_shx): Handle bfd_mach_sh5 as arch_sh4.
-	* po/POTFILES.in: Regenerate.
-	* po/opcodes.pot: Regenerate.
-
-2002-02-04  Frank Ch. Eigler  <fche@redhat.com>
-
-	* cgen-dis.in (print_insn_@arch@): Support disassemble_info.insn_sets.
-
-2002-02-04  Alexandre Oliva  <aoliva@redhat.com>
-
-	* sh-opc.h (sh_arg_type): Added A_DISP_PC_ABS.
-
-2002-02-01  Alan Modra  <amodra@bigpond.net.au>
-
-	* Makefile.am: Run "make dep-am"
-	* Makefile.in: Regenerate.
-
-2002-01-31  Ivan Guzvinec  <ivang@opencores.org>
-
-	* or32-dis.c: New file.
-	* or32-opc.c: New file.
-	* configure.in: Add support for or32.
-	* configure: Regenerate.
-	* Makefile.am: Add support for or32.
-	* Makefile.in: Regenerate.
-	* disassemble.c: Add support for or32.
-	* po/POTFILES.in: Regenerate.
-	* po/opcodes.pot: Regenerate.
-
-2002-01-27  Daniel Jacobowitz  <drow@mvista.com>
-
-	* configure: Regenerated.
-
-2002-01-26  Nick Clifton  <nickc@cambridge.redhat.com>
-
-	* po/fr.po: Updated version.
-
-2002-01-25  Nick Clifton  <nickc@cambridge.redhat.com>
-
-	* po/es.po: Updated version.
-
-2002-01-24  Nick Clifton  <nickc@cambridge.redhat.com>
-
-	* po/da.po: New version.
-
-2002-01-23  Nick Clifton  <nickc@cambridge.redhat.com>
-
-	* po/da.po: New file: Spanish translation.
-	* configure.in (ALL_LINGUAS): Add da.
-	* configure: Regenerate.
-
-2002-01-22  Graydon Hoare  <graydon@redhat.com>
-
-	* fr30-asm.c: Regenerate.
-	* fr30-desc.c: Likewise.
-	* fr30-desc.h: Likewise.
-	* fr30-dis.c: Likewise.
-	* fr30-ibld.c: Likewise.
-	* fr30-opc.c: Likewise.
-	* fr30-opc.h: Likewise.
-	* m32r-asm.c: Likewise.
-	* m32r-desc.c: Likewise.
-	* m32r-desc.h: Likewise.
-	* m32r-dis.c: Likewise.
-	* m32r-ibld.c: Likewise.
-	* m32r-opc.c: Likewise.
-	* m32r-opc.h: Likewise.
-	* m32r-opinst.c: Likewise.
-	* openrisc-asm.c: Likewise.
-	* openrisc-desc.c: Likewise.
-	* openrisc-desc.h: Likewise.
-	* openrisc-dis.c: Likewise.
-	* openrisc-ibld.c: Likewise.
-	* openrisc-opc.c: Likewise.
-	* openrisc-opc.h: Likewise.
-	* xstormy16-desc.c: Likewise.
-
-2002-01-22  Richard Henderson  <rth@redhat.com>
-
-	* alpha-dis.c (print_insn_alpha): Also mask the base opcode for
-	comparison.
-
-2002-01-22  Alan Modra  <amodra@bigpond.net.au>
-
-	* Makefile.am: Run "make dep-am".
-	* Makefile.in: Regenerate.
-	* po/POTFILES.in: Regenerate.
-
-2002-01-19  Richard Earnshaw  <rearnsha@arm.com>
-
-	* arm-opc.h (arm_opcodes): Use generic rule %5?hb instead of %h.
-	* arm-dis.c (print_insn_arm): Don't handle 'h' case.
-
-2002-01-18  Keith Walker  <keith.walker@arm.com>
-
-	* arm-opc.h (arm_opcodes): Add bxj instruction.
-
-2002-01-17  Nick Clifton  <nickc@cambridge.redhat.com>
-
-	* po/opcodes.pot: Regenerate.
-	* po/fr.po: Regenerate.
-	* po/sv.po: Regenerate.
-	* po/tr.po: Regenerate.
-
-2002-01-16  Nick Clifton  <nickc@cambridge.redhat.com>
-
-	* po/tr.po: Import new version.
-
-2002-01-15  Richard Earnshaw  <rearnsha@arm.com>
-
-	* arm-opc.h (arm_opcodes): Add patterns for VFP instructions.
-	* arm-dis.c (print_insn_arm): Support new disassembly qualifiers for
-	VFP bitfields.
-
-2002-01-10  matthew green  <mrg@redhat.com>
-
-	* xstormy16-asm.c: Regenerate.
-	* xstormy16-desc.c: Likewise.
-	* xstormy16-desc.h: Likewise.
-	* xstormy16-dis.c: Likewise.
-	* xstormy16-opc.c: Likewise.
-	* xstormy16-opc.h: Likewise.
-
-2002-01-07  Nick Clifton  <nickc@cambridge.redhat.com>
-
-	* po/es.po: New file: Spanish translation.
-	* configure.in (ALL_LINGUAS): Add es.
-	* configure: Regenerate.
-
-2001-12-31  Jeffrey A Law  (law@redhat.com)
-
-	* hppa-dis.c (print_insn_hppa): Handle new 'c' mode completers,
-	'X', 'M', and 'A'.  No longer emit a space after 'x' or 's'.
-	Always emit a space after 'H'.
-
-2001-12-18  matthew green  <mrg@redhat.com>
-
-	* ppc-opc.c (PPCVEC): Include PPC_OPCODE_ANY.
-
-2001-12-17  Richard Henderson  <rth@redhat.com>
-
-	* alpha-opc.c (unop): Encode with RB as $sp.
-
-2001-12-07  Geoffrey Keating  <geoffk@redhat.com>
-
-	* Makefile.am: Add support for xstormy16.
-	* Makefile.in: Regenerate.
-	* configure.in: Add support for xstormy16.
-	* configure: Regenerate.
-	* disassemble.c: Add support for xstormy16.
-	* xstormy16-asm.c: New generated file.
-	* xstormy16-desc.c: New generated file.
-	* xstormy16-desc.h: New generated file.
-	* xstormy16-dis.c: New generated file.
-	* xstormy16-ibld.c: New generated file.
-	* xstormy16-opc.c: New generated file.
-	* xstormy16-opc.h: New generated file.
-
-2001-12-06  Richard Henderson  <rth@redhat.com>
-
-	* alpha-opc.c (alpha_opcodes): Add wh64en.
-
-2001-12-04  Alexandre Oliva  <aoliva@redhat.com>
-
-	* d10v-opc.c (d10v_predefined_registers): Remove warnings
-	introduced in Nov 29's patch.
-
-	* d10v-dis.c (print_operand): Apply REGISTER_MASK to `num' of
-	unmatched register.
-
-	* d10v-dis.c (print_operand): Disregard OPERAND_SP in register
-	predefined value.
-
-	* d10v-opc.c (RSRC_NOSP): New macro.
-	(d10v_operands): Add it.
-	(d10v_opcodes): Use RSRC_NOSP in post-decrement "st" and "st2w".
-
-2001-11-29  Alexandre Oliva  <aoliva@redhat.com>
-
-	* d10v-opc.c (d10v_predefined_registers): Mark `sp' as OPERAND_SP.
-	(RSRC_SP): New macro.
-	(d10v_operands): Add it.
-	(d10v_opcodes): Adjust "st" and "st2w" to use RSRC_SP.
-
-2001-11-23  Lars Brinkhoff  <lars@nocrew.org>
-
-	* pdp11-dis.c (print_insn_pdp11): Handle illegal instructions.
-	Also, break out of the loop as soon as an instruction has been
-	printed.
-
-2001-11-17  matthew green  <mrg@redhat.com>
-
-	* ppc-opc.c (mfvrsave, mtvrsave): New instructions.
-
-2001-11-15  Alan Modra  <amodra@bigpond.net.au>
-
-	* po/POTFILES.in: Regenerate.
-
-	* ppc-opc.c (PPC64): Revert 2001-10-12. Do include PPC_OPCODE_PPC.
-	(insert_bat, extract_bat, insert_bba, extract_bba,
-	insert_bd, extract_bd, insert_bdm, extract_bdm,
-	insert_bdp, extract_bdp, valid_bo,
-	insert_bo, extract_bo, insert_boe, extract_boe,
-	insert_ds, extract_ds, insert_de, extract_de,
-	insert_des, extract_des, insert_li, extract_li,
-	insert_mbe, extract_mbe, insert_mb6, extract_mb6,
-	insert_nb, extract_nb, insert_nsi, extract_nsi,
-	insert_ral, insert_ram, insert_ras,
-	insert_rbs, extract_rbs, insert_sh6, extract_sh6,
-	insert_spr, extract_spr, insert_tbr, extract_tbr): Add dialect param.
-	(extract_bd, extract_bdm, extract_bdp,
-	extract_ds, extract_des,
-	extract_li, extract_nsi): Implement sign extension without conditional.
-	(insert_bdm, extract_bdm,
-	insert_bdp, extract_bdp, valid_bo): Handle 64 bit branch hints.
-	(extract_bdm, extract_bdp): Correct 32 bit validation.
-	(AT1_MASK, AT2_MASK): Define.
-	(BBOAT_MASK): Define.
-	(BBOATCB_MASK, BBOAT2CB_MASK, BBOATBI_MASK): Define.
-	(BOFM64, BOFP64, BOTM64, BOTP64): Define.
-	(BODNZM64, BODNZP64, BODZM64, BODZP64): Define.
-	(PPCCOM32, PPCCOM64): Define.
-	(powerpc_opcodes): Modify existing 32 bit insns with branch hints
-	and add new patterns to implement 64 bit branches with hints.  Move
-	booke instructions so they match before ppc64.
-
-	* ppc-dis.c (powerpc_dialect): Set PPC_OPCODE_64 in dialect for
-	64 bit default targets, and parse "32" and "64" in options.
-	Formatting fixes.
-	(print_insn_powerpc): Pass dialect to operand->extract.
-
-2001-11-14  Dave Brolley  <brolley@redhat.com>
-
-	* cgen-dis.c (count_decodable_bits): New function.
-	(add_insn_to_hash_chain): New function.
-	(hash_insn_array): Call add_insn_to_hash_chain.
-	(hash_insn_list): Call add_insn_to_hash_chain.
-	* m32r-dis.c: Regenerated.
-	* fr30-dis.c: Regenerated.
-
-2001-11-14  Andreas Jaeger  <aj@suse.de>
-
-	* i386-dis.c (print_insn): Use x86-64 as option.
-
-2001-11-14  Alan Modra  <amodra@bigpond.net.au>
-
-	* disassemble.c (disassembler): Call print_insn_i386.
-	* i386-dis.c (SUFFIX_ALWAYS): Define.
-	(struct dis_private): Add orig_sizeflag.
-	(print_insn_i386): Make it a wrapper, calling..
-	(print_insn): ..The old body of print_insn_i386.  Avoid longjmp
-	warning without using volatile by moving orig_sizeflag to priv,
-	and removing inbuf.  Parse disassembler_options.
-	(print_insn_i386_att, print_insn_i386_intel): Move initialisation
-	code to print_insn.
-	(putop): Remove #ifdef SUFFIX_ALWAYS.
-
-2001-11-11  Timothy Wall  <twall@alum.mit.edu>
-
-	* tic54x-dis.c: Use revised opcode structure.  Export opcode
-	template lookup.
-	(has_lkaddr): Don't forget about Lmem insns.
-	* tic54x-opc.c: Add emulation trap.  Parallel table now uses
-	standard opcode templates.
-
-2001-11-13  Zack Weinberg <zack@codesourcery.com>
+2004-01-13  Michael Snyder  <msnyder@redhat.com>
 
-	* i386-dis.c (grps): Change "sldt", "str", and "smsw" entries
-	to "sldtQ", "strQ", "smswQ" respectively; all with Ev operand
-	category instead of Ew.
+	* sh-dis.c (print_insn_sh): Allocate 4 bytes for insn.
 
-2001-11-12  Niraj Gupta <ngupta@zumanetworks.com>
+2004-01-09  Paul Brook  <paul@codesourcery.com>
 
-	* m68k-opc.c: Fix definitions of wddata[bwl].
+	* arm-opc.h (arm_opcodes): Move generic mcrr after known
+	specific opcodes.
 
-2001-11-09  Richard Sandiford  <rsandifo@redhat.com>
+2004-01-07  Daniel Jacobowitz  <drow@mvista.com>
 
-	* cgen-asm.c (cgen_parse_keyword): If the keyword is too big to
-	fit in the buffer, try to match the empty keyword.
-
-2001-11-09  Nick Clifton  <nickc@cambridge.redhat.com>
-
-	* cgen-ibld.in (extract_1): Fix badly placed #if 0.
-	* fr30-ibld.c: Regenerate.
-	* m32r-ibld.c: Regenerate.
-	* openrisc-ibld.c: Regenerate.
-
-2001-11-04  Chris Demetriou  <cgd@broadcom.com>
-
-	* mips-dis.c (print_insn_mips): Remove spaces at end of line.
-
-2001-11-02  Nick Clifton  <nickc@cambridge.redhat.com>
-
-	* configure.in (ALL_LINGUAS): Add "fr", "sv" and "tr".
-	* configure: Regernate.
-	* po/fr.po: New file.
-	* po/sv.po: New file.
-	* po/tr.po: New file.
-
-2001-11-01  Stephane Carrez  <Stephane.Carrez@worldnet.fr>
-
-	* m68hc11-dis.c (print_insn): Fix disassembly of movb with a
-	constant as source.
-
-2001-10-30  Hans-Peter Nilsson  <hp@bitrange.com>
-
-	* Makefile.am (CFILES): Add mmix-dis.c and mmix-opc.c.  Regenerate
-	dependencies.
-	* Makefile.in: Regenerate.
-	* mmix-dis.c, mmix-opc.c: New files.
-
-2001-10-29  Kazu Hirata  <kazu@hxi.com>
-
-	* d30v-dis.c: Fix a comment typo.
-
-2001-10-23  Chris Demetriou  <cgd@broadcom.com>
-
-	* mips-opc.c (mips_builtin_opcodes): Mark "bgezall" and
-	"bltzall" as writing GPR 31 (since they do).
-
-	* mips-dis.c (print_insn_arg): Calculate info->target
-	where appropriate.
-	(print_insn_mips): Fill in instruction info.
-	(print_mips16_insn_arg): Remove unneded variable 'val'.
-	Removed duplicated instruction target calculations,
-	calculate once and print that result.  Use same idiom for
-	masking the jump segment bits as is used in print_insn_arg.
-
-2001-10-20  Alan Modra  <amodra@bigpond.net.au>
-
-	* ppc-opc.c (CT): Make it an optional operand.
-
-2001-10-17  Chris Demetriou  <cgd@broadcom.com>
-
-	* mips-dis.c (mips_isa_type): Make the ISA used to disassemble
-	SB-1 binaries include instructions specific to the SB-1.
-	* mips-opc.c (SB1): New definition.
-	(mips_builtin_opcodes): Add SB-1 extension opcodes "div.ps",
-	"recip.ps", "rsqrt.ps", and "sqrt.ps".
-
-2001-10-17  matthew green  <mrg@redhat.com>
-
-	* ppc-opc.c (STRM): New AltiVec operand.
-	(XDSS): New AltiVec instruction form.
-	(mtvscr): Correct operand list.
-	(dst, dstt, dstst, dststt, dss, dssall): AltiVec instructions.
-
-2001-10-17  Alan Modra  <amodra@bigpond.net.au>
-
-	* po/POTFILES.in: Regenerate.
-
-2001-10-13  matthew green  <mrg@redhat.com>
-
-	* ppc-opc.c (MO): New macro for MO field of mbar instruction.
-	(powerpc_opcodes): Add rfci, wrtee, wrteei, mfdcrx, mfdcr,
-	mtdcrx, mtdcr, msync, dcba and mbar as BookE instructions.
-
-2001-10-13  Nick Clifton  <nickc@cambridge.redhat.com>
-
-	* cgen-ibld.in: Include safe-ctype.h in preference to
-	ctype.h.
-	* cgen-asm.in: Include safe-ctype.h in preference to
-	ctype.h.  Fix formatting.  Use ISSPACE instead of isspace and
-	TOLOWER instead of tolower.
-	(@arch@_cgen_build_insn_regex): Remove duplication of syntax
-	string elements in constructed regular expression.
-	* fr30-asm.c: Regenerate.
-	* fr30-desc.c: Regenerate.
-	* fr30-ibld.c: Regenerate.
-	* m32r-asm.c: Regenerate.
-	* m32r-desc.c: Regenerate.
-	* m32r-ibld.c: Regenerate.
-	* openrisc-asm.c: Regenerate.
-	* openrisc-desc.c: Regenerate.
-	* openrisc-ibld.c: Regenerate.
-	* po/opcodes.pot: Regenerate.
-
-2001-10-12  matthew green  <mrg@redhat.com>
-
-	* ppc-opc.c (insert_de, extract_de, insert_des, extract_des): New
-	instruction field instruction/extraction functions for new BookE
-	DE form instructions.
-	(CT): New macro for CT field in an X form instruction.
-	(DE, DES, DEO, DE_MASK): New macros for DE/DES fields in DE form
-	instructions.
-	(PPC64): Don't include PPC_OPCODE_PPC.
-	(403): New opcode macro for PPC403 processors.
-	(BOOKE): New opcode macro for BookE processors.
-	(bce, bcel, bcea, bcela, bclre, bclrel: New BookE instructions.
-	(bcctre, bcctrel, be, bel, bea, bela, icbt, icbte, lwzxe): Likewise.
-	(dcbste, lwzuxe, luxe, dcbfe, lbzxe, lwarxe, lbzuxe): Likewise.
-	(stwcxe, stwxe, stxe, stwuxe, stuxe, stbxe, dcbtste, stbuxe): Likewise.
-	(mfapidi, dcbte, lhzxe, lhzuxe, lhaxe, lhauxe, subfe64): Likewise.
-	(subfeo64, adde64, addeo64, sthxe, sthuxe, subfze64): Likewise.
-	(subfzeo64, addze64, addzeo64, dcbie, subfme64, subfmeo64): Likewise.
-	(addme64, addmeo64, stdcxe., mcrxr64, lwbrxe, lfsxe, lfsuxe): Likewise.
-	(lfdxe, lfduxe, stwbrxe, stfsxe, stfsuxe, stfdxe, dcbae): Likewise.
-	(stfduxe, tlbivax, tlbivaxe, lhbrxe, ldxe, lduxe, tlbsx): Likewise.
-	(tlbsxe, sthbrxe, stdxe, stduxe, icbie, stfiwxe, dcbze, lbze): Likewise.
-	(lbzue, ldue, lhze, lhzue, lhae, lhaue, lwze, lwzue): Likewise.
-	(stbe, stbue, sthe, sthue, stwe, stwue, lfse, lfsue, lfde): Likewise.
-	(lfdue, stde, stdue, stfse, stfsue, stfde, stfdue): Likewise.
-
-	* ppc-dis.c (print_insn_big_powerpc, print_insn_little_powerpc): Look
-	for a disassembler option of `booke', `booke32' or `booke64' to enable
-	BookE support in the disassembler.
-
-2001-10-12  John Healy  <jhealy@redhat.com>
-
-	* cgen-dis.in (print_insn): Use min (cd->base_insn_bitsize, buflen*8)
-	for the length when extracting the base part of the insn.
-
-2001-10-09  Bruno Haible  <haible@clisp.cons.org>
-
-	* cgen-asm.in (*_cgen_build_insn_regex): Generate a case sensitive
-	regular expression.  Fix some formatting problems.
-	* fr30-asm.c: Regenerate.
-	* openrisc-asm.c: Regenerate.
-	* m32r-asm.c: Regenerate.
-
-2001-10-09  Christian Groessler <cpg@aladdin.de>
-
-	* z8k-dis.c (unparse_instr): Fixed formatting. Change disassembly
-	of indirect register memory accesses to be same format the
-	assembler accepts.
-
-2001-10-09  Nick Clifton  <nickc@cambridge.redhat.com>
-
-	* sh-opc.h: Fix encoding of least significant nibble of the
-	DSP single data transfer instructions.
-
-	* sh-dis.c (print_insn_shx): Fix decoding of As opcode in DSP
-	instructions.
-
-2001-10-08  Nick Clifton  <nickc@cambridge.redhat.com>
-
-	* cgen-asm.in: Fix compile time warning messages in generated
-	C files.
-	* cgen-dis.in: The same.
-	* cgen-ibld.in: The same.
-	* fr30-asm.c: Regenerate.
-	* fr30-desc.c: Regenerate.
-	* fr30-dis.c: Regenerate.
-	* fr30-ibld.c: Regenerate.
-	* fr30-opc.c: Regenerate.
-	* m32r-asm.c: Regenerate.
-	* m32r-desc.c: Regenerate.
-	* m32r-dis.c: Regenerate.
-	* m32r-ibld.c: Regenerate.
-	* m32r-opc.c: Regenerate.
-	* m32r-opinst.c Regenerate.
-	* openrisc-asm.c: Regenerate.
-	* openrisc-desc.c: Regenerate.
-	* openrisc-dis.c: Regenerate.
-	* openrisc-ibld.c: Regenerate.
-	* openrisc-opc.c: Regenerate.
-	* openrisc-opc.h: Regenerate.
-	* Makefile.in: Regenerate.
-	* po/POTFILES.in: Regenerate.
-	* po/opcodes.pot: Regenerate.
-
-2001-10-08  Aldy Hernandez  <aldyh@redhat.com>
-
-	* arm-opc.h (arm_opcodes): Add cirrus insns.
-
-	* arm-dis.c (print_insn_arm): Add 'I' case.
-
-2001-10-03  Alan Modra  <amodra@bigpond.net.au>
-
-	* po/POTFILES.in: Regenerate.
-	* configure: Regenerate.
-
-2001-10-02  Alan Modra  <amodra@bigpond.net.au>
-
-	* Makefile.am (Makefile): Depend on bfd/configure.in.
-	Run "make dep-am".
-	* Makefile.in: Regenerate.
-
-2001-09-30  John Healy  <jhealy@redhat.com>
-
-	* cgen-ibld.in (insert_1): Switched bfd_get_bits and bfd_set_bits
-	calls to cgen_get_insn_value and cgen_put_insn_value calls.
-	(extract_1): Switched bfd_get_bits call to cgen_get_insn_value call.
-
-2001-09-30  Hans-Peter Nilsson  <hp@bitrange.com>
-
-	* Makefile.am: Update dependencies with "make dep-am".
-	* Makefile.in: Regenerate.
-
-2001-09-26  Alan Modra  <amodra@bigpond.net.au>
-
-	* arc-dis.c: Formatting fixes.
-	(my_sprintf): Define using VPARAMS, VA_OPEN, VA_FIXEDARG, VA_CLOSE.
-
-2001-09-21  Bruno Haible  <haible@clisp.cons.org>
-
-	* arc-dis.c: Don't include <ctype.h>.
-	* openrisc-desc.c: Likewise.
-	* openrisc-ibld.c: Likewise.
-
-2001-09-20  Nick Clifton  <nickc@cambridge.redhat.com>
-
-	* fr30-opc.c: Fix compile time warning messages.
-	* i370-opc.c: Fix compile time warning messages.
-	* i960-dis.c: Fix compile time warning messages.
-	* m32r-asm.c: Fix compile time warning messages.
-	* m32r-desc.c: Fix compile time warning messages.
-	* m32r-dis.c: Fix compile time warning messages.
-	* m32r-ibld.c: Fix compile time warning messages.
-	* m32r-opc.c: Fix compile time warning messages.
-	* m32r-opinst.c: Fix compile time warning messages.
-	* ns32k-dis.c: Fix compile time warning messages.
-	* openrisc-asm.c: Fix compile time warning messages.
-	* openrisc-desc.c: Fix compile time warning messages.
-	* openrisc-dis.c: Fix compile time warning messages.
-	* openrisc-ibld.c: Fix compile time warning messages.
-	* openrisc-opc.c: Fix compile time warning messages.
-	* pdp11-dis.c: Fix compile time warning messages.
-	* tic54x-dis.c: Fix compile time warning messages.
-	* v850-opc.c: Fix compile time warning messages.
-	* vax-dis.c: Fix compile time warning messages.
-	* w65-opc.h: Fix compile time warning messages.
-	* z8k-opc.h: Fix compile time warning messages.
-	* z8kgen.c: Fix compile time warning messages.
-
-2001-09-19  Nick Clifton  <nickc@cambridge.redhat.com>
-
-	* arm-dis.c:   Fix compile time warning messages.
-	* cgen-asm.c:  Fix compile time warning messages.
-	* cgen-dis.c:  Fix compile time warning messages.
-	* cris-dis.c:  Fix compile time warning messages.
-	* d10v-dis.c:  Fix compile time warning messages.
-	* fr30-asm.c:  Fix compile time warning messages.
-	* fr30-desc.c: Fix compile time warning messages.
-	* fr30-dis.c:  Fix compile time warning messages.
-	* fr30-ibld.c: Fix compile time warning messages.
-
-2001-09-18  Bruno Haible  <haible@clisp.cons.org>
-
-	* cgen-asm.c: Include "safe-ctype.h" instead of <ctype.h>.
-	(cgen_parse_keyword): Use ISALNUM instead of isalnum.
-	* cgen-opc.c: Include "safe-ctype.h" instead of <ctype.h>.
-	(cgen_keyword_lookup_name): Use ISALPHA/TOLOWER instead of
-	isalpha/tolower.
-	(cgen_keyword_add): Use ISALNUM instead of isalnum.
-	(hash_keyword_name): Use TOLOWER instead of tolower.
-	* fr30-asm.c: Include "safe-ctype.h" instead of <ctype.h>.
-	(parse_insn_normal): Use TOLOWER/ISSPACE instead of
-	tolower/isspace.
-	(fr30_cgen_assemble_insn): Use ISSPACE instead of isspace.
-	* fr30-desc.c: Don't include <ctype.h>.
-	* fr30-ibld.c: Likewise.
-	* ia64-gen.c: Include "safe-ctype.h" instead of <ctype.h>.
-	(load_insn_classes, parse_resource_users, load_depfile): Use
-	ISSPACE instead of isspace.
-	* m32r-asm.c: Include "safe-ctype.h" instead of <ctype.h>.
-	(parse_insn_normal): Use TOLOWER/ISSPACE instead of
-	tolower/isspace.
-	(m32r_cgen_assemble_insn): Use ISSPACE instead of isspace.
-	* m32r-desc.c: Don't include <ctype.h>.
-	* m32r-ibld.c: Likewise.
-	* openrisc-asm.c: Include "safe-ctype.h" instead of <ctype.h>.
-	(parse_insn_normal): Use TOLOWER/ISSPACE instead of
-	tolower/isspace.
-	(openrisc_cgen_assemble_insn): Use ISSPACE instead of isspace.
-
-2001-09-18  Martin Schwidefsky <schwidefsky@de.ibm.com>
-
-	* Makefile.am: Add rules and dependencies to create the s/390 opcode
-	table out of s390-opc.txt automatically.
-	* configure.in: Add BFD_CC_FOR_BUILD to allow CC_FOR_BUILD to be used.
-	* s390-mkopc.c (dumpTable): Change output to create a complete file.
-	* s390-opc.c: New improved opcode format macros and remove the
-	pregenerated opcode table.
-	* s390-opc.txt: Adapt to new improved opcode format macros.
-
-2001-09-14  David Schleef <ds@schleef.org>
-
-	* ppc-opc.c (VXA, VXA_MASK): Fix mask bits.
-
-2001-09-04  Alan Modra  <amodra@bigpond.net.au>
-
-	* i386-dis.c (grps): Don't print the implicit al/ax/eax register
-	for opcode 0xf6 or 0xf7 forms of mul, imul, div, idiv insns.
-
-2001-08-31  Eric Christopher  <echristo@redhat.com>
-	    Jason Eckhardt    <jle@redhat.com>
-
-	* mips-dis.c: Add support for bfd_mach_mipsisa32 and
-	bfd_mach_mipsisa64. Remove bfd_mach_mips32, bfd_mach_mips32_4k,
-	bfd_mach_mips64.
-
-2001-08-31  Andreas Jaeger  <aj@suse.de>
-
-	* tic54x-opc.c: Add default initializers to avoid warnings.
-
-	* arc-opc.c: Include "sysdep.h" to get stdio.h as include file.
-	* arc-ext.c: Likewise.
-
-2001-08-28  matthew green  <mrg@redhat.com>
-
-	* ppc-opc.c (icbt): Order correctly.
-
-2001-08-27  David Edelsohn  <dje@watson.ibm.com>
-	    Torbjorn Granlund  <tege@swox.com>
-
-	* ppc-opc.c (DS): Add PPC_OPERAND_DS flag.
-	(LS): Define.
-	(insert_ds): Complain if not a multiple of 4.
-	(XSYNC): Define.
-	(XSYNC_MASK): Define.
-	(powerpc_opcodes): Add "slbmte", "lwsync", "ptesync", "slbmfev",
-	"slbmfee".  Modify "sync" to use XSYNC_MASK and LS.
-
-2001-08-26  Andreas Jaeger  <aj@suse.de>
-
-	* h8500-opc.h: Add default initializers to h8500_table to shut up
-	GCC warnings.
-
-2001-08-25  Andreas Jaeger  <aj@suse.de>
-
-	* tic54x-dis.c: Add unused attributes where needed.
-
-	* z8k-dis.c (output_instr): Add unused attribute.
-
-	* h8300-dis.c: Add missing prototypes.
-	(bfd_h8_disassemble): Make static.
-
-	* cris-dis.c: Add missing prototype.
-	* h8500-dis.c: Likewise.
-	* m68hc11-dis.c: Likewise.
-	* pj-dis.c: Likewise.
-	* tic54x-dis.c: Likewise.
-	* v850-dis.c: Likewise.
-	* vax-dis.c: Likewise.
-	* w65-dis.c: Likewise.
-	* z8k-dis.c: Likewise.
-
-	* d10v-dis.c: Add missing prototype.
-	(dis_long): Remove unused variable.
-	(dis_2_short): Likewise.
-
-	* sh-dis.c: Add missing prototypes.
-	* v850-opc.c: Likewise.
-	Add unused attributes where needed.
-
-	* ns32k-dis.c: Add missing prototypes.
-	(bit_extract_simple): Remove unused variable.
-
-2001-08-23  Martin Schwidefsky  <schwidefsky@de.ibm.com>
-
-	* s390-opc.c: Add "low or high" and "not low or high"
-	branch instructions for gcc 3.0.
-	* s390-opc.txt: Likewise.
-
-2001-08-21  Andreas Jaeger  <aj@suse.de>
-
-	* i960-dis.c: Add parameters for prototypes
-	(ctrl): Add unused attributes.
-	(cobr): Likewise.
-	(put_abs): Likewise.
-
-	* mips-dis.c: Add missing prototypes.
-	* a29k-dis.c: Likewise.
-	* arc-dis.c: Likewise.
-	* ia64-opc.c: Likewise.
-
-	* s390-dis.c: Add missing prototypes.
-	(init_disasm): Remove unused attribute since the parameter is
-	used.
-
-2001-08-16  Thiemo Seufer <seufer@csv.ica.uni-stuttgart.de>
-
-	* mips-opc.c (M1): Define. Reformatted Code.
-	(mips_builtin_opcodes): Added performance counter opcodes mfpc, mfps,
-	mtps, mtps. Typo.
-
-2001-08-16  Jonathan Larmour  <jlarmour@redhat.com>
-
-	* mips-opc.c: R3900s can support all branch likely INSN_MACROs where
-	the corresponding non-likely insn is in MIPS I.
-
-2001-08-13  Kazu Hirata  <kazu@hxi.com>
-
-	* mcore-dis.c: Fix formatting.
-	* mips-dis.c: Likewise.
-	* pj-dis.c: Likewise.
-	* z8k-dis.c: Likewise.
-
-2001-08-12  Richard Henderson  <rth@redhat.com>
-
-	* cgen-ibld.in (extract_normal): Match type of VALUE and MASK
-	to *VALUEP.  Regenerate all cgen files.
-
-2001-08-10  Richard Sandiford  <rsandifo@redhat.com>
-
-	* mips-dis.c (print_insn_mips): Remove OPCODE_IS_MEMBER's gp32
-	argument.
-	* mips-opc.c (G6): Undefine.
-	(mips_builtin_opcodes): Remove gp32 entry for "move".  Add macro
-	as the first "move" alternative.
-
-2001-08-10  Andreas Jaeger  <aj@suse.de>
-
-	* configure.in: Add -Wstrict-prototypes and -Wmissing-prototypes
-	to build warnings.
-	* configure: Regenerate.
-
-2001-08-10  Alan Modra  <amodra@bigpond.net.au>
-
-	* ppc-opc.c: Revert 2001-08-08.
-
-2001-08-09  Alan Modra  <amodra@bigpond.net.au>
-
-	* dis-buf.c (generic_strcat_address): Add missing prototype.
-	#if 0 the functions as it is unused.
-
-2001-08-08  Alan Modra  <amodra@bigpond.net.au>
-
-	1999-10-25  Torbjorn Granlund  <tege@swox.com>
-	* ppc-opc.c: Include "bfd.h".
-	(powerpc_operands): Add new field for reloc type.
-
-2001-07-21  Thiemo Seufer <seufer@csv.ica.uni-stuttgart.de>
-
-	* mips-dis.c (print_insn_arg): Don't use software integer registers
-	for coprocessor registers.
-	(get_mips_isa): Removed.
-	(is_newabi): New function, checks if NewABI is used.
-	(_print_insn_mips): Get distinction between old ABI and new ABI right.
-
-2001-08-01  Christian Groessler <cpg@aladdin.de>
-
-	* z8kgen.c: Fixed indentation of opt[] array.  Include stdio.h to
-	get stderr definition.
-	(internal, gas): Removed warnings.
-	(gas): Create a correct final entry for created array.
-	* z8k-opc.h: Recreated with new z8kgen.
-
-2001-07-28  Kazu Hirata  <kazu@hxi.com>
-
-	* i386-dis.c: Fix formatting.
-
-2001-07-28  Matthias Kramm <kramm@quiss.org>
-
-	* i386-dis.c: Change formatting conventions for architecture
-	i386:intel to better match the format of various intel i386
-	assemblers, like nasm, tasm or masm.
-
-2001-07-24  Alan Modra  <amodra@bigpond.net.au>
-
-	* Makefile.am: Update dependencies with "make dep-am".
-	* Makefile.in: Regenerate
-
-2001-07-24  Kazu Hirata  <kazu@hxi.com>
-
-	* alpha-dis.c: Fix formatting.
-	* cris-dis.c: Likewise.
-	* d10v-dis.c: Likewise.
-	* d30v-dis.c: Likewise.
-	* m10300-dis.c: Likewise.
-	* tic54x-dis.c: Likewise.
-
-2001-07-23  Kazu Hirata  <kazu@hxi.com>
-
-	* m68k-dis.c: Fix formatting.
-	* pj-dis.c: Likewise.
-	* s390-dis.c: Likewise.
-	* z8k-dis.c: Likewise.
-
-2001-07-21  Chris Demetriou  <cgd@broadcom.com>
-
-	* mips-opc.c (mips_builtin_opcodes): Sort c.le.s and c.lt.s
-	into the rest of the surrounding definitions.
-
-2001-07-18  Alan Modra  <amodra@bigpond.net.au>
-
-	* i386-dis.c (grps): Print l or w suffix, and require mem modrm
-	for lgdt, lidt, sgdt, sidt.
-
-2001-07-13  Philip Blundell  <philb@gnu.org>
-
-	* arm-dis.c (print_insn_arm): Use decimal for offsets in LDR/STR.
-
-2001-07-12  Jeff Johnston  <jjohnstn@redhat.com>
-
-	* cgen-asm.in: Include "xregex.h" always to enable the libiberty
-	regex support.
-	(@arch@_cgen_build_insn_regex): New routine from Graydon.
-	(@arch@_cgen_assemble_insn): Add Graydon's code to use regex
-	to verify if it is worth parsing the insn as insn "x".  Also update
-	error message when insn is not a recognized format of the insn vs
-	when the insn is completely unrecognized.
-
-2001-07-11  Frank Ch. Eigler  <fche@redhat.com>
-
-	* cgen-dis.in (print_insn): Use cgen_get_insn_value instead of
-	bfd_get_bits.
-	* cgen-opc.c (cgen_get_insn_value, cgen_put_insn_value): Respect
-	non-zero CGEN_CPU_DESC->insn_chunk_bitsize.
-
-2001-07-09  Andreas Jaeger  <aj@suse.de>, Karsten Keil <kkeil@suse.de>
-
-	* i386-dis.c (set_op): Handle 64 bit and 32 bit mode.
-	(OP_J): Use bfd_vma for mask to work properly with 64 bits.
-	(op_address,op_riprel): Use bfd_vma to handle 64 bits.
-
-2001-07-05  Ben Elliston  <bje@redhat.com>
-
-	* Makefile.am (CPUDIR): Define.
-	(stamp-m32r): Update dependencies.
-	(stamp-fr30): Ditto.
-	(stamp-openrisc): Ditto.
+	* Makefile.am (libopcodes_la_DEPENDENCIES)
+	(libopcodes_la_LIBADD): Revert 2003-05-17 change.  Add explanatory
+	comment about the problem.
 	* Makefile.in: Regenerate.
 
-2001-07-03  Zoltan Hidvegi <hzoli@hzoli.2y.net>
-
-	* ppc-opc.c: Fix encoding of 'clf' instruction.
-
-2001-06-30  Geoffrey Keating  <geoffk@redhat.com>
-
-	* cgen-ibld.in (insert_normal): Support CGEN_IFLD_SIGN_OPT.
-
-2001-06-28  Geoffrey Keating  <geoffk@redhat.com>
-
-	* cgen-asm.c (cgen_parse_keyword): Allow any first character.
-	* cgen-opc.c (cgen_keyword_add): Ignore special first
-	character when building nonalpha_chars field.
-
-2001-06-24  Ben Elliston  <bje@redhat.com>
-
-	* m88k-dis.c: Format to conform to GNU coding standards.
-
-2001-06-23  Andreas Jaeger  <aj@suse.de>
-
-	* disassemble.c (disassembler_usage): Add unused attribute.
-
-2001-06-22  Eric Christopher  <echristo@redhat.com>
-
-	* mips-opc.c: Move prefx to start of the table.
-
-2001-06-22  Stacey Sheldon <ssheldon@Catena.com>
-
-	* arc-opc.c (insert_st_syntax): Fix over-optimisation of ST
-	instruction.
-
-2001-06-22  Pauli <pauli@moreton.com.au>
-
-	* m68k-opc.c: Add wdebug instruction.
-
-2001-06-15  Aldy Hernandez  <aldyh@redhat.com>
-
-	* m10300-opc.c (mn10300_opcodes): Change opcode for AM33 subc.
-
-2001-06-14  Geoffrey Keating  <geoffk@redhat.com>
-
-	* cgen-asm.c (cgen_parse_keyword): When looking for the
-	boundaries of a keyword, allow any special characters
-	that are actually in one of the allowed keyword.
-	* cgen-opc.c (cgen_keyword_add): Add any special characters
-	to the nonalpha_chars field.
-
-2001-06-12  Martin Schwidefsky <schwidefsky@de.ibm.com>
-
-	* s390-opc.c: Add lgh instruction.
-	* s390-opc.txt: Likewise.
-
-2001-06-11  Alan Modra  <amodra@bigpond.net.au>
-
-	* i386-dis.c: Group function prototypes in one place.
-	(FLOATCODE): Redefine as 1.
-	(USE_GROUPS): Redefine as 2.
-	(USE_PREFIX_USER_TABLE): Redefine as 3.
-	(X86_64_SPECIAL): Define as 4.
-	(GRP1b..GRPAMD): Move USE_GROUPS to bytecode1, index to bytecode2.
-	(PREGRP0..PREGRP26): Similarly with USE_PREFIX_USER_TABLE.
-	(dis386_att, dis386_intel, disx86_64_att, disx86_64_intel): Delete.
-	(dis386): New table combining above four tables.
-	(dis386_twobyte_att, dis386_twobyte_intel): Delete.
-	(dis386_twobyte): New table combining above two tables.
-	(x86_64_table): New table to handle x86_64.
-	(X86_64_0): Define.
-	(float_mem_att, float_mem_intel): Delet.
-	(float_mem): New table combining above two tables.
-	(print_insn_i386): Modify for above.
-	(dofloat): Likewise.
-	(putop): Handle '{', '|' and '}' to select alternative mnemonics.
-	Return 0 on success, 1 if no valid alternative.
-	(putop <case 'F'>, <case 'H'>): Print nothing for intel_syntax.
-	(putop <case 'T'>): Move to case 'U', and share case 'Q' code.
-	(putop <case 'I'>): Move to case 'T', and share case 'P' code.
-	(OP_REG <case rAX_reg .. rDI_reg>): Handle as for eAX_reg .. eDI_reg
-	if not 64-bit mode.
-	(OP_I <case q_mode>): Handle as for v_mode if not 64-bit mode.
-	(OP_I64): If not 64-bit mode, call OP_I.
-	OP_OFF64): If not 64-bit mode, call OP_OFF.
-	(OP_ST, OP_STi, OP_SEG, OP_DIR, OP_OFF, OP_OFF64, OP_MMX): Rename
-	'ignore'/'ignored' to 'bytemode'.
-
-2001-06-10  Alan Modra  <amodra@bigpond.net.au>
-
-	* configure.in: Sort 'ta' case statement.
-	* configure: Regenerate.
-
-	* i386-dis.c (dis386_att): Add 'H' to conditional branch and
-	loop,jcxz insns.
-	(disx86_64_att): Likewise.
-	(dis386_twobyte_att): Likewise.
-	(print_insn_i386): Don't print branch hints as a prefix.
-	(putop): 'H' macro prints branch hints.
-	(get64): Kill compile warnings.
-
-2001-06-09  Alexandre Oliva  <aoliva@redhat.com>
-
-	* sh-opc.h (sh_table): Don't use empty initializers.
-
-2001-06-06  Christian Groessler <cpg@aladdin.de>
-
-	* z8k-dis.c: Fix formatting.
-	(unpack_instr): Remove unused cases in switch statement. Add
-	safety abort() in default case.
-	(unparse_instr): Add safety abort() in default case.
-
-2001-06-06  Peter Jakubek <pjak@snafu.de>
-
-	* m68k-dis.c (print_insn_m68k): Fix typo.
-	* m68k-opc.c (m68k_opcodes): Correct allowed operands for
-	mcf (ColdFire) div, rem and moveb instructions.
-
-2001-06-06  Alan Modra  <amodra@bigpond.net.au>
-
-	* i386-dis.c (cond_jump_flag, loop_jcxz_flag): Define.
-	(cond_jump_mode, loop_jcxz_mode): Define.
-	(dis386_att): Add cond_jump_flag and loop_jcxz_flag as
-	appropriate, and 'F' suffix to loop insns.
-	(disx86_64_att): Likewise.
-	(dis386_twobyte_att): Likewise.
-	(print_insn_i386): Don't output addr prefix for loop, jcxz insns.
-	Output data size prefix for long conditional jumps.  Output cs and
-	ds branch hints.
-	(putop): Handle 'F', and mark PREFIX_ADDR used for case 'E'.
-	(OP_J): Don't make PREFIX_DATA used.
-
-2001-06-04  Alexandre Oliva  <aoliva@redhat.com>
-
-	* sh-opc.h (sh_table): Complete last element entry to avoid
-	compiler warning.
-
-2001-05-16  Thiemo Seufer <seufer@csv.ica.uni-stuttgart.de>
-
-	* mips-dis.c (mips_isa_type): Add MIPS r12k support.
-
-2001-05-23  Alan Modra  <amodra@one.net.au>
-
-	* arc-opc.c: Whitespace changes.
-
-2001-05-18  Hans-Peter Nilsson  <hp@axis.com>
-
-	* cris-opc.c (cris_spec_regs): Add missing initializer field for
-	last element.
-
-2001-05-15  Frank Ch. Eigler  <fche@redhat.com>
-
-	* cgen-dis.in (extract_normal): Complete support for min<base case.
-
-2001-05-15  Thiemo Seufer <seufer@csv.ica.uni-stuttgart.de>
-
-	* mips-dis.c (INSNLEN): Rename MAXLEN.
-	(std_reg_names): Replace by mips32_reg_names and mips64_reg_names.
-	(print_insn_arg): Remove $ prefix of register names.
-	(set_mips_isa_type): Remove.
-	(mips_isa_type): New function.
-	(get_mips_isa): New Function.
-	(print_insn_mips): Rename _print_insn_mips.
-	(_print_insn_mips): New function, contains code which was
-	duplicated in print_insn_big_mips and print_insn_little_mips.
-	(print_insn_big_mips): Moved code to _print_insn_mips.
-	(print_insn_little_mips): Likewise.
-	(print_mips16_insn_arg): Remove $ prefix of register names.
-	Print error message before abort.
-
-2001-05-14  J.T. Conklin  <jtc@redback.com>
-
-	* ppc-opc.c (powerpc_opcodes): Fixed extended opcode field of
-	simplified mnemonics used for setting PPC750-specific special
-	purpose	registers.
-
-2001-05-12  H.J. Lu  <hjl@gnu.org>
-
-	* i386-dis.c (print_insn_i386): Always set `mod', `reg' and
-	`rm'.
-
-2001-05-12  Peter Targett  <peter.targett@arccores.com>
-
-	* arc-opc.c (arc_reg_names): Correct attribute for lp_count
-	register to r/w.  Formatting fixes throughout file.
-
-2001-05-12  Alan Modra  <amodra@one.net.au>
-
-	* i386-dis.c (prefix_user_table): Correct movq2dq, movdq2q, and
-	movq operands.
-	(twobyte_has_modrm): Update table.
-	(need_modrm): Give it file scope.
-	(MODRM_CHECK): Define.
-	(dofloat): Use MODRM_CHECK.
-	(OP_E): Likewise.
-	(OP_EM): Likewise.
-	(OP_EX): Likewise.
-
-2001-05-07  Frank Ch. Eigler  <fche@redhat.com>
-
-	* cgen-dis.in (default_print_insn): Tolerate min<base instructions
-	even at end of a section.
-	* cgen-ibld.in (extract_normal): Tolerate min!=base!=max instructions
-	by ignoring precariously-unpacked insn_value in favor of raw buffer.
-
-2001-05-03  Thiemo Seufer <seufer@csv.ica.uni-stuttgart.de>
-
-	* disassemble.c (disassembler_usage): Remove unused attribute.
-
-2001-05-04  Frank Ch. Eigler  <fche@redhat.com>
-
-	* m32r-dis.c, -asm.c, -ibld.c: Regenerated with disassembler fixes.
-
-2001-05-04  Frank Ch. Eigler  <fche@redhat.com>
-
-	* cgen-dis.in (print_insn): Remove call to read_insn.  Instead,
-	assume incoming buffer already has the base insn loaded.  Handle
-	smaller-than-base instructions for variable-length case.
-
-2001-05-04  Alan Modra  <amodra@one.net.au>
-
-	* i386-dis.c (Ev, Ed): Remove duplicate define.
-	(Gd): Define.
-	(XS): Define.
-	(OP_XS): New function.
-	(dis386_twobyte_att): Correct pinsrw, pextrw, pmovmskb, and
-	movmskp operands.
-	(dis386_twobyte_intel): Likewise.
-	(prefix_user_table): Use MS for maskmovq operand.
-
-2001-04-27  Johan Rydberg  <jrydberg@opencores.org>
-
-	* Makefile.am: Add OpenRISC target.
-	* Makefile.in: Regenerated.
-
-	* disassemble.c (disassembler): Recognize the OpenRISC disassembly.
-
-	* configure.in (bfd_openrisc_arch): Add target.
-	* configure: Regenerated.
-
-	* openrisc-asm.c: New file.
-	* openrisc-desc.c: Likewise.
-	* openrisc-desc.h: Likewise.
-	* openrisc-dis.c: Likewise.
-	* openrisc-ibld.c: Likewise.
-	* openrisc-opc.c: Likewise.
-	* openrisc-opc.h: Likewise.
-
-2001-04-24  Christian Groessler  <cpg@aladdin.de>
-
-	* z8k-dis.c: add names of control registers (ctrl_names);
-	(seg_length): provides instruction length fixup for segmented
-	mode; (unpack_instr): correctly handle ARG_DISP16, ARG_DISP12,
-	CLASS_0DISP7, CLASS_1DISP7, CLASS_DISP8 and CLASS_PR cases;
-	(unparse_intr): handle CLASS_PR, print addresses without '#'
-	* z8k-opc.h: re-created with new z8kgen
-	* z8kgen.c: merged in fixes which were in existing z8k-opc.h; new
-	entries for ldctl/ldctlb instruction
-
-2001-04-06  Andreas Jaeger  <aj@suse.de>
-
-	* i386-dis.c: Add ffreep instruction.
-
-2001-03-30  Alexandre Oliva  <aoliva@redhat.com>
-
-	* ppc-opc.c (insert_mbe): Shift mask initializer as long.
-
-2001-03-24  Alan Modra  <alan@linuxcare.com.au>
-
-	* i386-dis.c (PREGRP25): Define.
-	(dis386_twobyte_att): Use here in place of "movntq" entry.
-	(dis386_twobyte_intel): Likewise.
-	(prefix_user_table): Add PREGRP25 entry for "movntq" and "movntdq".
-	(PREGRP26): Define.
-	(dis386_twobyte_att): Use here.
-	(dis386_twobyte_intel): Likewise.
-	(prefix_user_table): Add PREGRP26 entry for "punpcklqdq".
-	(prefix_user_table <maskmovdqu>): XM operand, not MX.
-	(prefix_user_table): Cosmetic changes to "bad" entries.
-
-2001-03-23  Nick Clifton  <nickc@redhat.com>
-
-	* mips-opc.c: Remove extraneous whitespace.
-	* mips-dis.c: Remove extraneous whitespace.
-
-2001-03-22  Ben Elliston  <bje@redhat.com>
-
-	* cgen-asm.in (@arch@_cgen_assemble_insn): Move tmp_errmsg
-	declaration inside CGEN_VERBOSE_ASSEMBLER_ERRORS conditional.
-	* cgen-ibld.in (put_insn_int_value): Mark cd parameter as unused
-	to allay a compiler warning.
-
-2001-03-22  Alan Modra  <alan@linuxcare.com.au>
-
-	* i386-dis.c (dis386_twobyte_att): Add entries for paddq, psubq.
-	(dis386_twobyte_intel): Likewise.
-	(twobyte_has_modrm): Set entry for paddq, psubq.
-
-2001-03-20  Patrick Macdonald  <patrickm@redhat.com>
-
-	* cgen-dis.in (print_insn_@arch@): Add support for target machine
-	determination via CGEN_COMPUTE_MACH.
-	* fr30-desc.c: Regenerate.
-	* fr30-dis.c: Regenerate.
-	* fr30-opc.h: Regenerate.
-	* m32r-desc.c: Regenerate.
-	* m32r-dis.c: Regenerate.
-	* m32r-opc.h: Regenerate.
-	* m32r-opinst.c: Regenerate.
-
-2001-03-20  H.J. Lu  <hjl@gnu.org>
-
-	* configure.in: Remove the redundent AC_ARG_PROGRAM.
-	* configure: Rebuild.
-
-2001-03-19  Jim Wilson  <wilson@redhat.com>
-
-	* ia64-gen.c (fetch_insn_class): If xsect, then ignore comment and
-	notestr if larger than xsect.
-	(in_class): Handle format M5.
-	* ia64-asmtab.c: Regnerate.
-
-2001-03-19  John David Anglin  <dave@hiauly1.hia.nrc.ca>
-
-	* vax-dis.c (print_insn_vax): Only fetch two bytes if the info buffer
-	has more than one byte left to read.
-
-2001-03-16  Martin Schwidefsky  <schwidefsky@de.ibm.com>
-
-	* s390-opc.c: Add new opcodes.  Smooth out formatting.
-	* s390-opc.txt: Add new opcodes.
-
-2001-03-06  Nick Clifton  <nickc@redhat.com>
-
-	* arm-dis.c (print_insn_thumb): Compute destination address
-	of BLX(1) instruction by taking bit 1 from PC and not from bit
-	0 of the offset.
-
-2001-03-06  Igor Shevlyakov  <igor@windriver.com>
-
-	* m68k-dis.c (print_insn_m68k): Recognize Coldfire CPUs
-	so command line switches will work.
-
-2001-03-05  Dave Brolley  <brolley@redhat.com>
-
-	* fr30-asm.c: Regenerate.
-	* fr30-desc.c: Regenerate.
-	* fr30-desc.h: Regenerate.
-	* fr30-dis.c: Regenerate.
-	* fr30-ibld.c: Regenerate.
-	* fr30-opc.c: Regenerate.
-	* fr30-opc.h: Regenerate.
-	* m32r-asm.c: Regenerate.
-	* m32r-desc.c: Regenerate.
-	* m32r-desc.h: Regenerate.
-	* m32r-dis.c: Regenerate.
-	* m32r-ibld.c: Regenerate.
-	* m32r-opc.c: Regenerate.
-	* m32r-opc.h: Regenerate.
-	* m32r-opinst.c: Regenerate.
-
-2001-02-28  Igor Shevlyakov  <igor@windriver.com>
-
-	* m68k-opc.c: fix cpushl according to Motorola. Enable
-	bunch of instructions for Coldfire 5407 and add all new.
-
-2001-02-27  Alan Modra  <alan@linuxcare.com.au>
-
-	* configure.in (BFD_VERSION): Do without grep.
-	* configure: Regenerate.
-	* Makefile.am: Run "make dep-am".
-	* Makefile.in: Regenerate.
-
-2001-02-23  David Mosberger  <davidm@hpl.hp.com>
-
-	* ia64-opc-a.c: Add missing pseudo-ops for "cmp" and "cmp4".
-	* ia64-asmtab.c: Regenerate.
-
-2001-02-21  David Mosberger  <davidm@hpl.hp.com>
-
-	* ia64-opc-d.c (ia64_opcodes_d): Break the "add" pattern into two
-	separate variants: one for IMM22 and the other for IMM14.
-	* ia64-asmtab.c: Regenerate.
-
-2001-02-21  Greg McGary  <greg@mcgary.org>
-
-	* cgen-opc.c (cgen_get_insn_value): Add missing `return'.
-
-2001-02-20  H.J. Lu  <hjl@gnu.org>
-
-	* Makefile.am (ia64-ic.tbl): Remove the target.
-	(ia64-raw.tbl): Likewise.
-	(ia64-waw.tbl): Likewise.
-	(ia64-war.tbl): Likewise.
-	(ia64-asmtab.c): Generate it in the source directory.
-	* Makefile.in: Regenerated.
-
-2001-02-18  lars brinkhoff  <lars@nocrew.org>
-
-	* Makefile.am: Add PDP-11 target.
-	* configure.in: Likewise.
-	* disassemble.c: Likewise.
-	* pdp11-dis.c: New file.
-	* pdp11-opc.c: New file.
-
-2001-02-14  Jim Wilson  <wilson@redhat.com>
-
-	* ia64-ic.tbl: Update from Intel.  Add setf to fr-writers.
-	* ia64-asmtab.c: Regenerate.
-
-2001-02-12  Jan Hubicka  <jh@suse.cz>
-
-	* i386-dis.c (prefix_user_t): Add 'Y' to SSE ineger converison
-	instructions.
-	(putop): Handle 'Y'
-
-2001-02-11  Maciej W. Rozycki  <macro@ds2.pg.gda.pl>
-
-	* mips-dis.c (print_insn_arg): Use top four bits of the address of
-	the following instruction not of the jump itself for the jump
-	target.
-	(print_mips16_insn_arg): Likewise.
-
-2001-02-11  Michael Sokolov  <msokolov@ivan.Harhan.ORG>
-
-	* Makefile.am (stamp-lib): ranlib the libopcodes.a in the build
-	directory.
-	* Makefile.in: Regenerate.
-
-2001-02-09  Schwidefsky  <schwidefsky@de.ibm.com>
-
-	* Makefile.am: Add linux target for S/390.
-	* Makefile.in: Likewise.
-	* configure.in: Likewise.
-	* disassemble.c: Likewise.
-	* s390-dis.c: New file.
-	* s390-mkopc.c: New file.
-	* s390-opc.c: New file.
-	* s390-opc.txt: New file.
-
-2001-02-05  Jim Wilson  <wilson@redhat.com>
-
-	* ia64-asmtab.c: Revert 2000-12-16 change.
-
-2001-02-02  Patrick Macdonald  <patrickm@redhat.com>
-
-	* fr30-desc.h: Regenerate with CGEN_MAX_SYNTAX_ELEMENTS.
-	* m32r-desc.h: Regenerate.
-
-2001-02-01  Jan Hubicka  <jh@suse.cz>
-
-	* i386-dis.c (dis386_att, grps): Use 'T' for push/pop
-	(putop): Handle 'T', alphabetize order, fix 'I' handling in Intel syntax
-
-2001-01-14  Alan Modra  <alan@linuxcare.com.au>
-
-	* hppa-dis.c (print_insn_hppa): Handle '>' and '<' arg types.
-
-2001-01-13  Nick Clifton  <nickc@redhat.com>
-
-	* disassemble.c: Remove spurious white space.
-
-2001-01-13  Jan Hubicka  <jh@suse.cz>
-
-	* i386-dis.c (dis386_att, disx86_64_att): Fix ret, lret and iret
-	templates.
-
-2001-01-11  Peter Targett  <peter.targett@arccores.com>
-
-	* configure.in: Add arc-ext.lo for bfd_arc_arch selection.
-	* Makefile.am (C_FILES): Add arc-ext.c.
-	(ALL_MACHINES) Add arc-ext.lo.
-	(INCLUDES) Add opcode directory to list.
-	New dependency entry for arc-ext.lo.
-	* disassemble.c (disassembler): Correct call to
-	arc_get_disassembler.
-	* arc-opc.c: New update for ARC, including full base
-	instructions for ARC variants.
-	* arc-dis.h, arc-dis.c: New update for ARC, including
-	extensibility functionality.
-	* arc-ext.h, arc-ext.c: New files for handling extensibility.
-
-2001-01-10  Jan Hubicka  <jh@suse.cz>
-
-	* i386-dis.c (PREGRP15 - PREGRP24): New.
-	(dis386_twobyt): Add SSE2 instructions.
-	(twobyte_uses_SSE_prefix: Rename from ... ; add new SSE instructions.
-	(twobyte_uses_f3_prefix): ... this one.
-	(grps): Add SSE instructions.
-	(prefix_user_table): Add two new slots; add SSE2 instructions.
-	(print_insn_i386): Rename uses_f3_prefix to uses_SSE_prefix;
-	Handle the REPNZ and Data16 prefixes as well; do proper lookup
-	to prefix_user_table.
-	(OP_E): Accept mfence and lfence as well.
-	(OP_MMX): Data16 prefix turns MMX to SSE; support REX extensions.
-	(OP_XMM): Support REX extensions.
-	(OP_EM): Likewise.
-	(OP_EX): Likewise.
-
-2001-01-09  Nick Clifton  <nickc@redhat.com>
-
-	* arm-dis.c (print_insn): Set pc to zero for instructions with
-	a reloc associated with them.
-
-2001-01-09  Jeff Johnston  <jjohnstn@redhat.com>
-
-	* cgen-asm.in (parse_insn_normal): Changed syn to be
-	CGEN_SYNTAX_CHAR_TYPE.  Changed all references to *syn
-	as character to use CGEN_SYNTAX_CHAR macro and all comparisons
-	to '\0' to use 0 instead.
-	* cgen-dis.in (print_insn_normal): Ditto.
-	* cgen-ibld.in (insert_insn_normal, extract_insn_normal): Ditto.
-
-2001-01-05  Jan Hubicka  <jh@suse.cz>
-
-	* i386-dis.c: Add x86_64 support.
-	(rex): New static variable.
-	(REX_MODE64, REX_EXTX, REX_EXTY, REX_EXTZ): New constants.
-	(USED_REX): New macro.
-	(Ev, Ed, Rm, Iq, Iv64, Cm, Dm, Rm*, Ob64, Ov64): New macros.
-	(OP_I64, OP_OFF64, OP_IMREG): New functions.
-	(OP_REG, OP_OFF): Declare.
-	(get64, get32, get32s): New functions.
-	(r??_reg): New constants.
-	(dis386_att): Change templates of instruction implicitly promoted
-	to 64bit; change e?? to RMe?? for unwind RM byte instructions.
-	(grps): Likewise.
-	(dis386_intel): Likewise.
-	(dixx86_64_att): New table based on dis386_att.
-	(dixx86_64_intel): New table based on dis386_intel.
-	(names64, names8rex): New global variable.
-	(names32, names16): Add extended registers.
-	(prefix_user_t): Recognize rex prefixes.
-	(prefix_name): Print REX prefixes nicely.
-	(op_riprel): New global variable.
-	(start_pc): Set type to bfd_vma.
-	(print_insn_i386): Detect the 64bit mode and use proper table;
-	move ckprefix after initializing the buffer; output unused rex prefixes;
-	output information about target of RIP relative addresses.
-	(putop): Support 'O' and 'I'. Update handling of "P', 'Q', 'R' and 'S';
-	(print_operand_value): New function.
-	(OP_E, OP_G, OP_REG, OP_I, OP_J, OP_DIR, OP_OFF, OP_D): Add support for
-	REX prefix and new modes.
-	(get64, get32s): New.
-	(get32): Return bfd_signed_vma type.
-	(set_op): Initialize the op_riprel.
-	* disassemble.c (disassembler): Recognize the x86-64 disassembly.
-
-2001-01-03  Richard Sandiford  <r.sandiford@redhat.com>
-
-	 cgen-dis.in (read_insn): Use bfd_get_bits()
-
-2001-01-02  Richard Sandiford  <rsandifo@redhat.com>
-
-	* cgen-dis.c (hash_insn_array): Use bfd_put_bits().
-	(hash_insn_list): Likewise
-	* cgen-ibld.in (insert_1): Use bfd_put_bits() and bfd_get_bits().
-	(extract_1): Use bfd_get_bits().
-	(extract_normal): Apply sign extension to both extraction
-	methods.
-	* cgen-opc.c (cgen_get_insn_value): Use bfd_get_bits()
-	(cgen_put_insn_value): Use bfd_put_bits()
-
-2000-12-28  Frank Ch. Eigler  <fche@redhat.com>
-
-	* cgen-asm.in (parse_insn_normal): Print better error message for
-	instructions with missing operands.
-
-2000-12-21  Santeri Paavolainen <santtu@ssh.com>
-
-	* cgen-opc.c: Include alloca.h if HAVE_ALLOCA_H is defined.
-
-2000-12-16  Nick Clifton  <nickc@redhat.com>
-
-	* Makefile.in: Regenerate.
-	* aclocal.m4: Regenerate.
-	* config.in: Regenerate.
-	* configure.in: Add spacing.
-	* configure: Regenerate.
-	* ia64-asmtab.c: Regenerate.
-	* po/opcodes.pot: Regenerate.
-
-2000-12-12  Frank Ch. Eigler  <fche@redhat.com>
-
-	* cgen-asm.in (@arch@_cgen_assemble_insn): Prefer printing insert-time
-	error messages over later parse-time ones.
-
-2000-12-12  Jim Wilson  <wilson@redhat.com>
-
-	* ia64-dis.c (print_insn_ia64): Cast away const on ia64_free_opcode
-	argument.
-	* ia64-gen.c (insert_deplist): Cast sizeof result to int.
-	(print_dependency_table): Print NULL if semantics field not set.
-	(insert_opcode_dependencies): Mark cmp parameter as unused.
-	(print_main_table): Use fprintf_vma to print long long fields.
-	(main): Mark argv paramter as unused.  Convert to old style definition.
-	* ia64-opc.c (ia64_find_dependency): Cast sizeof result to int.
-	* ia64-asmtab.c: Regnerate.
-
-2000-12-09  Nick Clifton  <nickc@redhat.com>
-
-	* m32r-dis.c (print_insn): Prevent re-read of instruction from
-	wrong address.
-
-	* fr30-dis.c: Regenerate.
-
-2000-12-08  Peter Targett  <peter.targett@arccores.com>
-
-	* configure.in: Add arc-ext.lo for bfd_arc_arch selection.
-	* Makefile.am (C_FILES): Add arc-ext.c.
-	(ALL_MACHINES) Add arc-ext.lo.
-	(INCLUDES) Add opcode directory to list.
-	New dependency entry for arc-ext.lo.
-	* disassemble.c (disassembler): Correct call to
-	arc_get_disassembler.
-	* arc-opc.c: New update for ARC, including full base
-	instructions for ARC variants.
-	* arc-dis.h, arc-dis.c: New update for ARC, including
-	extensibility functionality.
-	* arc-ext.h, arc-ext.c: New files for handling extensibility.
-
-2000-12-03  Chris Demetriou   cgd@sibyte.com
-
-	* mips-opc.c (mips_builtin_opcodes): Use the WR_HILO, RD_HILO,
-	MOD_HILO, and MOD_LO macros.
-
-	* mips-opc.c (M1, M2): Delete.
-	(mips_builtin_opcodes): Remove all uses of M1.
-
-	* mips-opc.c (mips_builtin_opcodes): Make the dmfc2 and dmtc2
-	instructions take "G" format second operands and use the
-	correct flags.
-	There are mfc3 and mtc3 opcodes, so add dmfc3 and dmtc3 opcodes to
-	match.
-	Delete "sel" code operands from mfc1 and mtc1.
-	Add MIPS64 opcode changes (dclo, dclz), and "sel" code variants
-	for dm[ft]c[023].
-
-2000-12-03  Ed Satterthwaite  ehs@sibyte.com  and
-	    Chris Demetriou   cgd@sibyte.com
-
-	* mips-opc.c (mips_builtin_opcodes): Finish additions
-	for MIPS32 support, and clean up existing entries for
-	aesthetics, consistency with the MIPS32 ISA, and
-	with consistency the rest of the table.
-
-2000-12-01  Nick Clifton  <nickc@redhat.com>
-
-	* mips16-opc.c (mips16_opcodes): Add initialiser for membership
-	field.
-
-2000-12-01  Chris Demetriou <cgd@sibyte.com>
-
-	mips-dis.c (print_insn_arg): Handle new 'U' and 'J' argument
-	specifiers.  Update 'B' for new constant names, and remove
-	'm'.
-	mips-opc.c (mips_builtin_opcodes): Place "pref" and "ssnop"
-	near the top of the array, so they are disassembled properly.
-	Enable "ssnop" for MIPS32.  Add "break" variant with 20 bit
-	code for MIPS32.  Update "clo" and "clz" to use 'U' operand
-	specifier.  Add 'H' format specifier variants for "mfc1,"
-	"mfc2," "mfc3," "mtc1," "mtc2," and "mtc3" for MIPS32.  Update
-	MIPS32 "sdbbp" to use 'B' operand specifier.  Add MIPS32
-	"wait" variant which uses 'J' operand specifier.
-
-	* mips-dis.c (set_mips_isa_type): Update to use
-	CPU_UNKNOWN and ISA_* constants.  Add bfd_mach_mips32 case.
-	Replace bfd_mach_mips4K with bfd_mach_mips32_4k case.
-	* mips-opc.c (I32): New constant for instructions added in
-	MIPS32.
-	(P4): Delete.
-	(mips_builtin_opcodes) Replace all uses of P4 with I32.
-
-	* mips-dis.c (set_mips_isa_type): Add cases for
-	bfd_mach_mips5 and bfd_mach_mips64.
-	* mips-opc.c (I64): New definitions.
-
-	* mips-dis.c (set_mips_isa_type): Add case for
-	bfd_mach_mips_sb1.
-
-2000-11-28  Hans-Peter Nilsson  <hp@bitrange.com>
-
-	* sh-dis.c (print_insn_ddt): Make insn_x, insn_y unsigned.
-	(print_insn_ppi): Make nib1, nib2, nib3 unsigned.
-	Initialize variable dc to NULL.
-	(print_insn_shx): Remove unused label d_reg_n.
-
-2000-11-24  Nick Clifton  <nickc@redhat.com>
-
-	* arm-opc.h: Add new opcode formatting parameter 'B'.
-	(arm_opcodes): Add XScale, v5, and v5te	instructions.
-	(thumb_opcodes): Add v5t instructions.
-
-	* arm-dis.c (print_insn_arm): Handle new 'B' format
-	parameter.
-	(print_insn_thumb): Decode BLX(1) instruction.
-
-2000-11-21  Chris Demetriou  <cgd@sibyte.com>
-
-	* mips-opc.c: Fix file header comment.
-
-2000-11-14  Hans-Peter Nilsson  <hp@axis.com>
-
-	* cris-dis.c (cris_get_disassembler): If abfd is NULL, return
-	print_insn_cris_with_register_prefix.
-
-2000-11-11  Alexandre Oliva  <aoliva@redhat.com>
-
-	* sh-opc.h: The operand of `mov.w r0, (<disp>,GBR)' is IMM1, not 0.
-
-2000-11-07  Matthew Green  <mrg@redhat.com>
-
-	* cgen-dis.in (print_insn): All insns which can fit into insn_value
-	must be loaded there in their entirety.
-
-2000-10-20  Jakub Jelinek  <jakub@redhat.com>
-
-	* sparc-dis.c (v9a_asr_reg_names): Add v9b ASRs.
-	(compute_arch_mask): Add v8plusb and v9b machines.
-	(print_insn_sparc): siam mode decoding, accept ASRs up to 25.
-	* sparc-opc.c: Support for Cheetah instruction set.
-	(prefetch_table): Add #invalidate.
-
-2000-10-16  Nick Clifton  <nickc@redhat.com>
-
-	* mcore-dis.c (imsk): Change mask for OC to 0xFE00.
-
-2000-10-06  Dave Brolley  <brolley@redhat.com>
-
-	* fr30-desc.h: Regenerate.
-	* m32r-desc.h: Regenerate.
-	* m32r-ibld.c: Regenerate.
-
-2000-10-05  Jim Wilson  <wilson@redhat.com>
-
-	* ia64-ic.tbl: Update from Intel.
-	* ia64-asmtab.c: Regenerate.
-
-2000-10-04  Kazu Hirata  <kazu@hxi.com>
-
-	* ia64-gen.c: Convert C++-style comments to C-style comments.
-	* tic54x-dis.c: Likewise.
-
-2000-09-29  Hans-Peter Nilsson  <hp@axis.com>
-
-	Changes to add dollar prefix to registers for files where user symbols
-	don't have a leading underscore.  Fix formatting.
-	* cris-dis.c (REGISTER_PREFIX_CHAR): New.
-	(format_reg): Add parameter with_reg_prefix.  All callers changed.
-	(print_with_operands): Ditto.
-	(print_insn_cris_generic): Renamed from print_insn_cris, add
-	parameter with_reg_prefix.
-	(print_insn_cris_with_register_prefix,
-	print_insn_cris_without_register_prefix, cris_get_disassembler):
-	New.
-	* disassemble.c (disassembler) [ARCH_cris]: Call cris_get_disassembler.
-
-2000-09-22  Jim Wilson  <wilson@redhat.com>
-
-	* ia64-opc-f.c (ia64_opcodes_f): Add fpcmp pseudo-ops for
-	gt, ge, ngt, and nge.
-	* ia64-asmtab.c: Regenerate.
-
-	* ia64-dis.c (print_insn_ia64): Revert Aug 7 byte skip count change.
-	* ia64-gen.c (parse_semantics): Handle IA64_DVS_STOP.
-	(lookup_specifier): Handle "PR%, 1 to 15" and "PR%, 16 to 62".
-	* ia64-ic.tbl, ia64-raw.tbl, ia64-war.tbl, ia64-waw.tbl: Update.
-	* ia64-asmtab.c: Regnerate.
-
-2000-09-13  Anders Norlander  <anorland@acc.umu.se>
-
-	* mips-opc.c (mips_builtin_opcodes): Support cache instruction on 4K cores.
-	Add mfc0 and mtc0 with sub-selection values.
-	Add clo and clz opcodes.
-	Add msub and msubu instructions for MIPS32.
-	Add madd/maddu aliases for mad/madu for MIPS32.
-	Support wait, deret, eret, movn, pref for MIPS32.
-	Support tlbp, tlbr, tlbwi, tlbwr.
-	(P4): New define.
-
-	* mips-dis.c (print_insn_arg): Print sdbbp 'm' args.
-	(print_insn_arg): Handle 'H' args.
-	(set_mips_isa_type): Recognize 4K.
-	Use CPU_* defines instead of hardcoded numbers.
-
-2000-09-11  Catherine Moore <clm@redhat.com>
-
-	* d30v-opc.c (d30v_operand_t): New operand type Rb2.
-	(d30v_format_tab): Use Rb2 for modinc and moddec.
-
-2000-09-07  Catherine Moore  <clm@redhat.com>
-
-	* d30v-opc.c (d30v_format_tab): Use format Ra for
-	modinc and moddec.
-
-2000-09-06  Alexandre Oliva  <aoliva@redhat.com>
-
-	* configure: Rebuilt with new libtool.m4.
-
-2000-09-05  Nick Clifton  <nickc@redhat.com>
-
-	* configure: Regenerate.
-	* po/opcodes.pot: Regenerate.
-
-2000-08-31  Alexandre Oliva  <aoliva@redhat.com>
-
-	* acinclude.m4: Include libtool and gettext macros from the
-	top level.
-	* aclocal.m4, configure: Rebuilt.
-
-2000-08-30  Kazu Hirata  <kazu@hxi.com>
-
-	* tic80-dis.c: Fix formatting.
-
-2000-08-29  Kazu Hirata  <kazu@hxi.com>
-
-	* w65-dis.c: Fix formatting.
-
-2000-08-28  Mark Hatle  <mhatle@mvista.com>
-
-	* ppc-opc.c: Add XTLB macro for a few PPC 4xx extended mnemonics.
-	(powerpc_opcodes): Add table entries for PPC 405 instructions.
-	Changed rfci, icbt, mfdcr, dccci, mtdcr, iccci from PPC to PPC403
-	instructions.  Added extended mnemonic mftbl as defined in the
-	405GP manual for all PPCs.
-
-2000-08-28  Jim Wilson  <wilson@redhat.com>
-
-	* ia64-dis.c (print_insn_ia64): Add failed label after ia64_free_opcode
-	call.  Change last goto to use failed instead of done.
-
-2000-08-28  Dave Brolley  <brolley@redhat.com>
-
-	* cgen-ibld.in (cgen_put_insn_int_value): New function.
-	(insert_normal): Allow for non-zero word_offset with CGEN_INT_INSN_P.
-	(insert_insn_normal): Use cgen_put_insn_int_value with CGEN_INT_INSN_P.
-	(extract_normal): Allow for non-zero word_offset with CGEN_INT_INSN_P.
-	* cgen-dis.in (read_insn): New static function.
-	(print_insn): Use read_insn to read the insn into the buffer and set
-	up for disassembly.
-	(print_insn): in CGEN_INT_INSN_P, make sure that the entire insn is
-	in the buffer.
-	* fr30-asm.c: Regenerated.
-	* fr30-desc.c: Regenerated.
-	* fr30-desc.h: Regenerated.
-	* fr30-dis.c: Regenerated.
-	* fr30-ibld.c: Regenerated.
-	* fr30-opc.c: Regenerated.
-	* fr30-opc.h: Regenerated.
-	* m32r-asm.c: Regenerated.
-	* m32r-desc.c: Regenerated.
-	* m32r-desc.h: Regenerated.
-	* m32r-dis.c: Regenerated.
-	* m32r-ibld.c: Regenerated.
-	* m32r-opc.c: Regenerated.
-
-2000-08-28  Kazu Hirata  <kazu@hxi.com>
-
-	* tic30-dis.c: Fix formatting.
-
-2000-08-27  Kazu Hirata  <kazu@hxi.com>
-
-	* sh-dis.c: Fix formatting.
-
-2000-08-24  David Edelsohn  <dje@watson.ibm.com>
-
-	* ppc-opc.c (powerpc_opcodes): Add rfid, mtsrd, mtsrdin, mtmsrd.
-
-2000-08-24  Kazu Hirata  <kazu@hxi.com>
-
-	* z8k-dis.c: Fix formatting.
-
-2000-08-16  Jim Wilson  <wilson@redhat.com>
-
-	* ia64-ic.tbl (pr-readers-nobr-nomovpr): Add addl, adds.  Delete
-	break, mov-immediate, nop.
-	* ia64-opc-f.c: Delete fpsub instructions.
-	* ia64-opc-m.c: Add POSTINC to all instructions with postincrement
-	address operand.  Rewrite using macros to avoid long lines.
-	* ia64-opc.h (POSTINC): Define.
-	* ia64-asmtab.c: Regenerate.
-
-2000-08-15  Jim Wilson  <wilson@redhat.com>
-
-	* ia64-ic.tbl: Add missing entries.
-
-2000-08-08  Jason Eckhardt  <jle@redhat.com>
-
-	* i860-dis.c (print_br_address): Change third argument from int
-	to long.
-
-2000-08-07  Richard Henderson  <rth@redhat.com>
-
-	* ia64-dis.c (print_insn_ia64): Get byte skip count correct
-	for MLI templates.  Handle IA64_OPND_TGT64.
-
-2000-08-04  Ben Elliston  <bje@redhat.com>
-
-	* cgen-dis.in, cgen-asm.in, cgen-ibld.in: New files.
-	* cgen.sh: Likewise.
-
-2000-08-02  Jim Wilson  <wilson@redhat.com>
-
-	* ia64-dis.c (print_insn_ia64): Call ia64_free_opcode at end.
-
-2000-07-29  Marek Michalkiewicz  <marekm@linux.org.pl>
-
-	* avr-dis.c (avr_operand): Use PARAMS macro in declaration.
-	Change return type from void to int.  Check the combination
-	of operands, return 1 if valid.  Fix to avoid BUF overflow.
-	Report undefined combinations of operands in COMMENT.
-	Report internal errors to stderr.  Output the adiw/sbiw
-	constant operand in both decimal and hex.
-	(print_insn_avr): Disassemble ldd/std with displacement of 0
-	as ld/st.  Check avr_operand () return value, handle invalid
-	combinations of operands like unknown opcodes.
-
-2000-07-28  Ben Elliston  <bje@redhat.com>
-
-	* Makefile.am (CGEN, CGENDEPS, CGENDIR, CGENFLAGS): New.
-	(run-cgen, stamp-m32r, stamp-fr30): New targets.
-	* Makefile.in: Regenerate.
-	* configure.in: Add --enable-cgen-maint option.
-	* configure: Regenerate.
-
-2000-07-26  Dave Brolley  <brolley@redhat.com>
-
-	* cgen-opc.c (cgen_hw_lookup_by_name): 'i' is now unsigned.
-	(cgen_hw_lookup_by_num): Ditto.
-	(cgen_operand_lookup_by_name): Ditto.
-	(print_address): Ditto.
-	(print_keyword): Ditto.
-	* cgen-dis.c (hash_insn_array): Mark unused parameters with
-	ATTRIBUTE_UNUSED.
-	* cgen-asm.c (hash_insn_array): Mark unused parameters with
-	ATTRIBUTE_UNUSED.
-	(cgen_parse_keyword): Ditto.
-
-2000-07-22  Jason Eckhardt  <jle@redhat.com>
-
-	* i860-dis.c: New file.
-	(print_insn_i860): New function.
-	(print_br_address): New function.
-	(sign_extend): New function.
-	(BITWISE_OP): New macro.
-	(I860_REG_PREFIX): New macro.
-	(grnames, frnames, crnames): New structures.
-
-	* disassemble.c (ARCH_i860): Define.
-	(disassembler): Add check for bfd_arch_i860 to set disassemble
-	function to print_insn_i860.
-
-	* Makefile.in (CFILES): Added i860-dis.c.
-	(ALL_MACHINES): Added i860-dis.lo.
-	(i860-dis.lo): New dependences.
-
-	* configure.in: New bits for bfd_i860_arch.
-
-	* configure: Regenerated.
-
-2000-07-20  Hans-Peter Nilsson  <hp@axis.com>
-
-	* Makefile.am (CFILES): Add cris-dis.c and cris-opc.c.
-	(ALL_MACHINES): Add cris-dis.lo and cris-opc.lo.
-	(cris-dis.lo, cris-opc.lo): New rules.
-	* Makefile.in: Rebuild.
-	* configure.in (bfd_cris_arch): New target.
-	* configure: Rebuild.
-	* disassemble.c (ARCH_cris): Define.
-	(disassembler): Support ARCH_cris.
-	* cris-dis.c, cris-opc.c: New files.
-	* po/POTFILES.in, po/opcodes.pot: Regenerate.
-
-2000-07-11  Jakub Jelinek  <jakub@redhat.com>
-
-	* sparc-opc.c (sparc_opcodes): popc has 0 in rs1, not rs2.
-	Reported by Bill Clarke <llib@computer.org>.
-
-2000-07-09  Geoffrey Keating  <geoffk@redhat.com>
-
-	* ppc-opc.c (powerpc_opcodes): Correct suffix for vslw.
-	Patch by Randall J Fisher <rfisher@ecn.purdue.edu>.
-
-2000-07-09  Alan Modra  <alan@linuxcare.com.au>
-
-	* hppa-dis.c (fput_reg, fput_fp_reg, fput_fp_reg_r, fput_creg,
-	fput_const, extract_3, extract_5_load, extract_5_store,
-	extract_5r_store, extract_5R_store, extract_10U_store,
-	extract_5Q_store, extract_11, extract_14, extract_16, extract_21,
-	extract_12, extract_17, extract_22): Prototype.
-	(print_insn_hppa): Rename inner block opcode -> opc to avoid
-	shadowing outer block.
-	(GET_BIT): Define.
-
-2000-07-05  DJ Delorie  <dj@redhat.com>
-
-	* MAINTAINERS: new
-
-2000-07-04  Alexandre Oliva  <aoliva@redhat.com>
-
-	* arm-dis.c (print_insn_arm): Output combinations of PSR flags.
-
-2000-07-03  Marek Michalkiewicz  <marekm@linux.org.pl>
-
-	* avr-dis.c (avr_operand): Change _ () to _() around all strings
-	marked for translation (exception from the usual coding style).
-	(print_insn_avr): Initialize insn2 to avoid warnings.
-
-2000-07-03  Kazu Hirata  <kazu@hxi.com>
-
-	* h8300-dis.c (bfd_h8_disassemble): Improve readability.
-	* h8500-dis.c: Fix formatting.
-
-2000-07-01  Alan Modra  <alan@linuxcare.com.au>
-
-	* Makefile.am (DEP): Fix 2000-06-22.  grep after running dep.sed
-	(CLEANFILES): Add DEPA.
-	* Makefile.in: Regenerate.
-
-2000-06-26  Scott Bambrough  <scottb@netwinder.org>
-
-	* arm-dis.c (regnames): Add an additional register set to match
-	the set used by GCC.  Make it the default.
-
-2000-06-22  Alan Modra  <alan@linuxcare.com.au>
-
-	* Makefile.am (DEP): grep for leading `/' in DEP1, and fail if we
-	find one.
-	* Makefile.in: Regenerate.
-
-2000-06-20  H.J. Lu  <hjl@gnu.org>
-
-	* Makefile.am: Rebuild dependency.
-	* Makefile.in: Rebuild.
-
-2000-06-18  Stephane Carrez  <stcarrez@worldnet.fr>
-
-	* Makefile.in, configure: regenerate
-	* disassemble.c (disassembler): Recognize ARCH_m68hc12,
-	ARCH_m68hc11.
-	* m68hc11-dis.c (read_memory, print_insn, print_insn_m68hc12):
-	New functions.
-	* configure.in: Recognize m68hc12 and m68hc11.
-	* m68hc11-dis.c, m68hc11-opc.c: New files for support of m68hc1x
-	* Makefile.am (CFILES, ALL_MACHINES): New files for disassembly
-	and opcode generation for m68hc11 and m68hc12.
-
-2000-06-16  Nick Duffek  <nsd@redhat.com>
-
-	* disassemble.c (disassembler): Refer to the PowerPC 620 using
-	bfd_mach_ppc_620 instead of 620.
-
-2000-06-12  Kazu Hirata  <kazu@hxi.com>
-
-	* h8300-dis.c: Fix formatting.
-	(bfd_h8_disassemble): Distinguish adds/subs, inc/dec.[wl]
-	correctly.
-
-2000-06-09  Denis Chertykov  <denisc@overta.ru>
-
-	* avr-dis.c (avr_operand): Bugfix for jmp/call address.
-
-2000-06-07  Denis Chertykov  <denisc@overta.ru>
-
-	* avr-dis.c: completely rewritten.
-
-2000-06-02  Kazu Hirata  <kazu@hxi.com>
-
-	* h8300-dis.c: Follow the GNU coding style.
-	(bfd_h8_disassemble) Fix a typo.
-
-2000-06-01  Kazu Hirata  <kazu@hxi.com>
-
-	* h8300-dis.c (bfd_h8_disassemble_init): Fix a typo.
-	(bfd_h8_disassemble): Distinguish the operand size of inc/dev.[wl]
-	correctly.  Fix a typo.
-
-2000-05-31  Nick Clifton  <nickc@redhat.com>
-
-	* opintl.h (_(String)): Explain why dgettext is used instead of
-	gettext.
-
-2000-05-30  Nick Clifton  <nickc@redhat.com>
-
-	* opintl.h (gettext, dgettext, dcgettext, textdomain,
-	bindtextdomain): Replace defines with those from intl/libgettext.h
-	to quieten gcc warnings.
-
-2000-05-26  Alan Modra  <alan@linuxcare.com.au>
-
-	* Makefile.am: Update dependencies with "make dep-am"
-	* Makefile.in: Regenerate.
-
-2000-05-25  Alexandre Oliva  <aoliva@redhat.com>
-
-	* m10300-dis.c (disassemble): Don't assume 32-bit longs when
-	sign-extending operands.
-
-2000-05-15  Donald Lindsay  <dlindsay@redhat.com>
-
-	* d10v-opc.c (d10v_opcodes): add ALONE tag to all short branches
-	except brf's.
-
-2000-05-21  Nick Clifton  <nickc@redhat.com>
-
-	* Makefile.am (LIBIBERTY): Define.
-
-2000-05-19 Diego Novillo <dnovillo@redhat.com>
-
-	* mips-dis.c (REGISTER_NAMES): Rename to STD_REGISTER_NAMES.
-	(STD_REGISTER_NAMES): New name for REGISTER_NAMES.
-	(reg_names): Rename to std_reg_names. Change it to a char **
-	static variable.
-	(std_reg_names): New name for reg_names.
-	(set_mips_isa_type): Set reg_names to point to std_reg_names by
-	default.
-
-2000-05-16  Frank Ch. Eigler  <fche@redhat.com>
-
-	* fr30-desc.h: Partially regenerated to account for changed
-	CGEN_MAX_* -> CGEN_ACTUAL_MAX_* macros.
-	* m32r-desc.h: Ditto.
-
-2000-05-15  Nick Clifton  <nickc@redhat.com>
-
-	* arm-opc.h: Use upper case for flasg in MSR and MRS
-	instructions.  Allow any bit to be set in the field_mask of
-	the MSR instruction.
-
-	* arm-dis.c (print_insn_arm): Decode _x and _s bits of the
-	field_mask of an MSR instruction.
-
-2000-05-11  Thomas de Lellis  <tdel@windriver.com>
-
-	* arm-opc.h: Disassembly of thumb ldsb/ldsh
-	instructions changed to ldrsb/ldrsh.
-
-2000-05-11  Ulf Carlsson  <ulfc@engr.sgi.com>
-
-	* mips-dis.c (print_insn_arg): Don't mask top 32 bits of 64-bit
-	target addresses for 'jal' and 'j'.
-
-2000-05-10  Geoff Keating  <geoffk@redhat.com>
-
-	* ppc-opc.c (powerpc_opcodes): Make the predicted-branch opcodes
-	also available in common mode when powerpc syntax is being used.
-
-2000-05-08  Alan Modra  <alan@linuxcare.com.au>
-
-	* m68k-dis.c (dummy_printer): Add ATTRIBUTE_UNUSED to args.
-	(dummy_print_address): Ditto.
-
-2000-05-04  Timothy Wall  <twall@redhat.com>
-
-	* tic54x-opc.c: New.
-	* tic54x-dis.c: New.
-	* disassemble.c (disassembler): Add ARCH_tic54x.
-	* configure.in: Added tic54x target.
-	* configure: Ditto.
-	* Makefile.am: Add tic54x dependencies.
-	* Makefile.in: Ditto.
-
-2000-05-03  J.T. Conklin  <jtc@redback.com>
-
-	* ppc-opc.c (VA, VB, VC, VD, VS, SIMM, UIMM, SHB): New macros, for
-	vector unit operands.
-	(VX, VX_MASK, VXA, VXA_MASK, VXR, VXR_MASK): New macros, for vector
-	unit instruction formats.
-	(PPCVEC): New macro, mask for vector instructions.
-	(powerpc_operands): Add table entries for above operand types.
-	(powerpc_opcodes): Add table entries for vector instructions.
-
-	* ppc-dis.c (print_insn_big_powerpc): Add PPC_OPCODE_ALTIVEC to mask.
-	(print_insn_little_powerpc): Likewise.
-	(print_insn_powerpc): Prepend 'v' when printing vector registers.
-
-2000-04-24  Clinton Popetz  <cpopetz@redhat.com>
-
-	* configure.in: Add bfd_powerpc_64_arch.
-	* disassemble.c (disassembler): Use print_insn_big_powerpc for
-	64 bit code.
-
-2000-04-24  Nick Clifton  <nickc@redhat.com>
-
-	* fr30-desc.c (fr30_cgen_cpu_open): Initialise signed_overflow
-	field.
-
-2000-04-23  Denis Chertykov  <denisc@overta.ru>
-
-	* avr-dis.c (reg_fmul_d): New. Extract destination register from
-	FMUL instruction.
-	(reg_fmul_r): New. Extract source register from FMUL instruction.
-	(reg_muls_d): New. Extract destination register from MULS instruction.
-	(reg_muls_r): New. Extract source register from MULS instruction.
-	(reg_movw_d): New. Extract destination register from MOVW instruction.
-	(reg_movw_r): New. Extract source register from MOVW instruction.
-	(print_insn_avr): Handle MOVW, MULS, MULSU, FMUL, FMULS, FMULSU,
-	EICALL, EIJMP, LPM r,Z, ELPM r,Z, SPM, ESPM instructions.
-
-2000-04-22  Timothy Wall  <twall@redhat.com>
-
-	* ia64-gen.c (general): Add an ordered table of primary
-	opcode names, as well as priority fields to disassembly data
-	structures to enforce a preferred disassembly format based on the
-	ordering of the opcode tables.
-	(load_insn_classes): Show a useful message if IC tables are missing.
-	(load_depfile): Ditto.
-	* ia64-asmtab.h (struct ia64_dis_names ): Add priority flag to
-	distinguish preferred disassembly.
-	* ia64-opc-f.c: Reorder some insn for preferred disassembly
-	format.  Fix incorrect flag on fma.s/fma.s.s0.
-	* ia64-opc.c: Scan *all* disassembly matches and use the one with
-	the highest priority.
-	* ia64-opc-b.c: Use more abbreviations.
-	* ia64-asmtab.c: Regenerate.
-
-2000-04-21  Jason Eckhardt  <jle@redhat.com>
-
-	* hppa-dis.c (extract_16): New function.
-	(print_insn_hppa): Fix incorrect handling of 'fe'. Added handling of
-	new operand types l,y,&,fe,fE,fx.
-
-2000-04-21  Richard Henderson  <rth@redhat.com>
-	    David Mosberger  <davidm@hpl.hp.com>
-	    Timothy Wall <twall@redhat.com>
-	    Bob Manson  <manson@charmed.cygnus.com>
-	    Jim Wilson  <wilson@redhat.com>
-
-	* Makefile.am (HFILES): Add ia64-asmtab.h, ia64-opc.h.
-	(CFILES): Add ia64-dis.c, ia64-opc-a.c, ia64-opc-b.c, ia64-opc-f.c,
-	ia64-opc-i.c, ia64-opc-m.c, ia64-opc-d.c, ia64-opc.c, ia64-gen.c,
-	ia64-asmtab.c.
-	(ALL_MACHINES): Add ia64-dis.lo, ia64-opc.lo.
-	(ia64-ic.tbl, ia64-raw.tbl, ia64-waw.tbl, ia64-war.tbl, ia64-gen,
-	ia64-gen.o, ia64-asmtab.c, ia64-dis.lo, ia64-opc.lo): New rules.
-	* Makefile.in: Rebuild.
-	* configure Rebuild.
-	* configure.in (bfd_ia64_arch): New target.
-	* disassemble.c (ARCH_ia64): Define.
-	(disassembler): Support ARCH_ia64.
-	* ia64-asmtab.c, ia64-asmtab.h, ia64-dis.c, ia64-gen.c ia64-ic.tbl,
-	ia64-opc-a.c, ia64-opc-b.c, ia64-opc-d.c ia64-opc-f.c, ia64-opc-i.c,
-	ia64-opc-m.c, ia64-opc-x.c, ia64-opc.c, ia64-opc.h, ia64-raw.tbl,
-	ia64-war.tbl, ia64-waw.tbl: New files.
-
-2000-04-20  Alexandre Oliva  <aoliva@redhat.com>
-
-	* m10300-dis.c (HAVE_AM30, HAVE_AM33): Define.
-	(disassemble): Use them.
-
-2000-04-14  Alan Modra  <alan@linuxcare.com.au>
-
-	* sysdep.h: Include "ansidecl.h" not <ansidecl.h>
-	* Makefile.am: Update dependencies.
-	* Makefile.in: Regenerate.
-
-2000-04-14  Michael Sokolov  <msokolov@ivan.Harhan.ORG>
-
-	* a29k-dis.c, alpha-dis.c, alpha-opc.c, arc-dis.c, arc-opc.c,
-	avr-dis.c, d10v-dis.c, d10v-opc.c, d30v-dis.c, d30v-opc.c,
-	disassemble.c, h8300-dis.c, h8500-dis.c, hppa-dis.c, i370-dis.c,
-	i370-opc.c, i960-dis.c, m10200-dis.c, m10200-opc.c, m10300-dis.c,
-	m10300-opc.c, m68k-dis.c, m68k-opc.c, m88k-dis.c, mcore-dis.c,
-	mips-dis.c, mips-opc.c, mips16-opc.c, pj-dis.c, pj-opc.c,
-	ppc-dis.c, ppc-opc.c, sh-dis.c, sparc-dis.c, sparc-opc.c,
-	tic80-dis.c, tic80-opc.c, v850-dis.c, v850-opc.c, vax-dis.c,
-	w65-dis.c, z8k-dis.c, z8kgen.c: Include sysdep.h.  Remove
-	ansidecl.h as sysdep.h includes it.
-
-2000-04-7  Andrew Cagney  <cagney@b1.redhat.com>
-
-	* configure.in (WARN_CFLAGS): Set to -W -Wall by default.  Add
-	--enable-build-warnings option.
-	* Makefile.am (AM_CFLAGS, WARN_CFLAGS): Add definitions.
-	* Makefile.in, configure: Re-generate.
-
-2000-04-05  J"orn Rennecke <amylaar@redhat.com>
-
-	* sh-opc.h (sh_table): Use A_DISP_PC / PCRELIMM_8BY2 for ldre & ldrs.
-	stc GBR,@-<REG_N> is available for arch_sh1_up.
-	Group parallel processing insn with identical mnemonics together.
-	Make three-operand psha / pshl come first.
-
-2000-04-05  J"orn Rennecke <amylaar@redhat.co.uk>
-
-	* sh-opc.h (sh_nibble_type): Remove DISP_8 and DISP_4.
-	Split IMM_[48]{,BY[24]} into IMM[01]_[48]{,BY[24]}.  Add REPEAT.
-	(sh_arg_type): Add A_PC.
-	(sh_table): Update entries using immediates.  Add repeat.
-	* sh-dis.c (print_insn_shx): Remove DISP_8 and DISP_4.
-	Split IMM_[48]{,BY[24]} into IMM[01]_[48]{,BY[24]}.  Add REPEAT.
-
-2000-04-04  Alan Modra  <alan@linuxcare.com.au>
-
-	* po/opcodes.pot: Regenerate.
-
-	* Makefile.am (MKDEP): Use gcc -MM rather than mkdep.
-	(DEP): Quote when passing vars to sub-make.  Add warning message
-	to end.
-	(DEP1): Rewrite for "gcc -MM".
-	(CLEANFILES): Add DEP2.
-	Update dependencies.
-	* Makefile.in: Regenerate.
-
-2000-04-03  Denis Chertykov  <denisc@overta.ru>
-
-	* avr-dis.c: Syntax cleanup.
-	(add0fff): Print the pc relative address as a signed number.
-	(add03f8): Likewise.
-
-2000-04-01  Ian Lance Taylor  <ian@zembu.com>
-
-	* disassemble.c (disassembler_usage): Don't use a prototype.  Mark
-	the parameter ATTRIBUTE_UNUSED.
-	* ppc-opc.c: Add ATTRIBUTE_UNUSED as needed.
-
-2000-04-01  Alexandre Oliva  <aoliva@redhat.com>
-
-	* m10300-opc.c: SP-based offsets are always unsigned.
-
-2000-03-29  Thomas de Lellis  <tdel@windriver.com>
-
-	* arm-opc.h (thumb_opcodes): Disassemble 0xde.. to "bal"
-	[branch always] instead of "undefined".
-
-2000-03-27  Nick Clifton  <nickc@redhat.com>
-
-	* d30v-opc.c (d30v_format_table): Move SHORT_AR to end of list of
-	short instructions, from end of list of long instructions.
-
-2000-03-27  Ian Lance Taylor  <ian@zembu.com>
-
-	* Makefile.am (CFILES): Add avr-dis.c.
-	(ALL_MACHINES): Add avr-dis.lo.
-
-2000-03-27  Alan Modra  <alan@linuxcare.com>
-
-	* avr-dis.c (add0fff, add03f8): Don't use structure bitfields to
-	truncate integers.
-	(print_insn_avr): Call function via pointer in K&R compatible way.
-	(dispLDD, regPP, reg50, reg104, reg40, reg20w, lit404, lit204,
-	add0fff, add03f8): Convert to old style function declaration and
-	add prototype.
-	(avrdis_opcode): Add prototype.
-
-2000-03-27  Denis Chertykov  <denisc@overta.ru>
-
-	* avr-dis.c: New file.  AVR disassembler.
-	* configure.in (bfd_avr_arch): New architecture support.
-	* disassemble.c: Likewise.
-	* configure: Regenerate.
-
-2000-03-06  J"oern Rennecke <amylaar@redhat.com>
-
-	* sh-opc.h (sh_table): ldre and ldrs have a *signed* displacement.
-
-2000-03-02  J"orn Rennecke <amylaar@redhat.co.uk>
-
-	* d30v-dis.c (print_insn): Remove d*i hacks.  Use per-operand
-	flag to determine if operand is pc-relative.
-	* d30v-opc.c:
-	(d30v_format_table):
-	(REL6S3): Renamed from IMM6S3.
-	Added flag OPERAND_PCREL.
-	(REL12S3, REL18S3, REL32): Split from IMM12S3, IMM18S3, REL32, with
-	added flag OPERAND_PCREL.
-	(IMM12S3U): Replaced with REL12S3.
-	(SHORT_D2, LONG_D): Delay target is pc-relative.
-	(SHORT_B2r, SHORT_B3r, SHORT_B3br, SHORT_D2r, LONG_Ur, LONG_2r):
-	Split from SHORT_B2, SHORT_D2, SHORT_B3b, SHORT_D2, LONG_U, LONG_2r,
-	using the REL* operands.
-	(LONG_2br, LONG_Dr): Likewise, from LONG_2b, LONG_D.
-	(SHORT_D1r, SHORT_D2Br, LONG_Dbr): Renamed from SHORT_D1, SHORT_D2B,
-	LONG_Db, using REL* operands.
-	(SHORT_U, SHORT_A5S): Removed stray alternatives.
-	(d30v_opcode_table): Use new *r formats.
-
-2000-02-28  Nick Clifton  <nickc@redhat.com>
-
-	* m32r-desc.c (m32r_cgen_cpu_open): Replace 'flags' with
-	'signed_overflow_ok_p'.
-
-2000-02-27  Eli Zaretskii  <eliz@is.elta.co.il>
-
-	* Makefile.am (stamp-lib): Use $(LIBTOOL) --config to get the
-	name of the libtool directory.
-	* Makefile.in: Rebuild.
-
-2000-02-24  Nick Clifton  <nickc@redhat.com>
-
-	* cgen-opc.c (cgen_set_signed_overflow_ok): New function.
-	(cgen_clear_signed_overflow_ok): New function.
-	(cgen_signed_overflow_ok_p): New function.
-
-2000-02-23  Andrew Haley  <aph@redhat.com>
-
-	* m32r-asm.c, m32r-desc.c, m32r-desc.h, m32r-dis.c,
-	m32r-ibld.c, m32r-opc.h: Rebuild.
-
-2000-02-23  Linas Vepstas <linas@linas.org>
-
-	* i370-dis.c, i370-opc.c: New.
-
-	* disassemble.c (ARCH_i370): Define.
-	(disassembler): Handle it.
-
-	* Makefile.am: Add support for Linux/IBM 370.
-	* configure.in: Likewise.
-
-	* Makefile.in: Regenerate.
-	* configure: Likewise.
-
-2000-02-22  Chandra Chavva   <cchavva@redhat.com>
-
-	* d30v-opc.c (d30v_opcode_tab) : Added FLAG_NOT_WITH_ADDSUBppp to
-	ST2H, STB, STH, STHH, STW and ST2H opcodes to prohibit parallel
-	procedure.
-
-2000-02-22  Andrew Haley  <aph@redhat.com>
-
-	* mips-dis.c (_print_insn_mips): New arg for OPCODE_IS_MEMBER:
-	force gp32 to zero.
-	* mips-opc.c (G6): New define.
-	(mips_builtin_op): Add "move" definition for -gp32.
-
-2000-02-22  Ian Lance Taylor  <ian@zembu.com>
-
-	From Grant Erickson <gerickso@Brocade.COM>:
-	* ppc-opc.c: Correct dcread--it takes 3 arguments, not 2.
-
-2000-02-21  Alan Modra  <alan@spri.levels.unisa.edu.au>
-
-	* dis-buf.c (buffer_read_memory): Change `length' param and all int
-	vars to unsigned.
-
-2000-02-17 J"orn Rennecke <amylaar@redhat.co.uk>
-
-	* sh-dis.c (print_movxy, print_insn_ddt, print_dsp_reg): New functions.
-	(print_insn_ppi): Likewise.
-	(print_insn_shx): Use info->mach to select appropriate insn set.
-	Add support for sh-dsp.  Remove FD_REG_N support.
-	* sh-opc.h (sh_nibble_type): Add new values for sh-dsp support.
-	(sh_arg_type): Likewise.  Remove FD_REG_N.
-	(sh_dsp_reg_nums): New enum.
-	(arch_sh1, arch_sh2, arch_sh3, arch_sh3e, arch_sh4): New macros.
-	(arch_sh_dsp, arch_sh3_dsp, arch_sh1_up, arch_sh2_up): Likewise.
-	(arch_sh3_up, arch_sh3e_up, arch_sh4_up, arch_sh_dsp_up): Likewise.
-	(arch_sh3_dsp_up): Likewise.
-	(sh_opcode_info): New field: arch.
-	(sh_table): Split up insn with FD_REG_N into ones with F_REG_N and
-	D_REG_N.  Fill in arch field.  Add sh-dsp insns.
-
-2000-02-14  Fernando Nasser  <fnasser@totem.to.redhat.com>
-
-	* arm-dis.c: Change flavor name from atpcs-special to
-	special-atpcs to prevent name conflict in gdb.
-	(get_arm_regname_num_options, set_arm_regname_option,
-	get_arm_regnames): New functions.  API to access the several
-	flavor of register names.  Note: Used by gdb.
-	(print_insn_thumb): Use the register name entry from the currently
-	selected flavor for LR and PC.
-
-2000-02-10  Nick Clifton  <nickc@redhat.com>
-
-	* mcore-opc.h (enum mcore_opclass): Add MULSH and OPSR
-	classes.
-	(mcore_table): Add "idly4", "psrclr", "psrset", "mulsh" and
-	"mulsh.h" instructions.
-	* mcore-dis.c (imsk array): Add masks for MULSH and OPSR
-	classes.
-	(print_insn_mcore): Add support for little endian targets.
-	Add support for MULSH and OPSR classes.
-
-2000-02-07  Nick Clifton  <nickc@redhat.com>
-
-	* arm-dis.c (parse_arm_diassembler_option): Rename again.
-	Previous delat did not take.
-
-2000-02-03  Timothy Wall  <twall@redhat.com>
-
-	* dis-buf.c (buffer_read_memory):  Use octets_per_byte field
-	to adjust target address bounds checking and calculate the
-	appropriate octet offset into data.
-
-2000-01-27  Nick Clifton  <nickc@redhat.com>
-
-	* arm-dis.c: (parse_disassembler_option): Rename to
-	parse_arm_disassembler_option and allow to be exported.
-
-	* disassemble.c (disassembler_usage): New function: Print out any
-	target specific disassembler options.
-	Call arm_disassembler_options() if the ARM architecture is being
-	supported.
-
-	* arm-dis.c (NUM_ELEM): Define this macro if not already
-	defined.
-	(arm_regname): New struct type for ARM register names.
-	(arm_toggle_regnames): Delete.
-	(parse_disassembler_option): Use register name structure.
-	(print_insn): New function: Combines duplicate code found in
-	print_insn_big_arm and print_insn_little_arm.
-	(print_insn_big_arm): Call print_insn.
-	(print_insn_little_arm): Call print_insn.
-	(print_arm_disassembler_options): Display list of supported,
-	ARM specific disassembler options.
-
-2000-01-27  Thomas de Lellis  <tdel@windriver.com>
-
-	* arm-dis.c (printf_insn_big_arm): Treat ELF symbols with the
-	ARM_STT_16BIT flag as Thumb code symbols.
-
-	* arm-dis.c (printf_insn_little_arm): Ditto.
-
-2000-01-25  Thomas de Lellis  <tdel@windriver.com>
-
-	* arm-dis.c (printf_insn_thumb): Prevent double dumping
-	of raw thumb instructions.
-
-2000-01-20  Nick Clifton  <nickc@redhat.com>
+2004-01-06  Alexandre Oliva  <aoliva@redhat.com>
 
-	* mcore-opc.h (mcore_table): Add "add" as an alias for "addu".
+	2003-12-19  Alexandre Oliva  <aoliva@redhat.com>
+	* frv-asm.c (parse_ulo16, parse_uhi16, parse_d12): Fix some
+	cut&paste errors in shifting/truncating numerical operands.
+	2003-08-04  Alexandre Oliva  <aoliva@redhat.com>
+	* frv-asm.c (parse_ulo16): Parse gotofflo and gotofffuncdesclo.
+	(parse_uslo16): Likewise.
+	(parse_uhi16): Parse gotoffhi and gotofffuncdeschi.
+	(parse_d12): Parse gotoff12 and gotofffuncdesc12.
+	(parse_s12): Likewise.
+	2003-08-04  Alexandre Oliva  <aoliva@redhat.com>
+	* frv-asm.c (parse_ulo16): Parse gotlo and gotfuncdesclo.
+	(parse_uslo16): Likewise.
+	(parse_uhi16): Parse gothi and gotfuncdeschi.
+	(parse_d12): Parse got12 and gotfuncdesc12.
+	(parse_s12): Likewise.
 
-2000-01-03  Nick Clifton  <nickc@cygnus.com>
+2004-01-02  Albert Bartoszko  <albar@nt.kegel.com.pl>
 
-	* arm-dis.c (streq): New macro.
-	(strneq): New macro.
-	(force_thumb): ew local variable.
-	(parse_disassembler_option): New function: Parse a single, ARM
-	specific disassembler command line switch.
-	(parse_disassembler_option): Call parse_disassembler_option to
-	parse individual command line switches.
-	(print_insn_big_arm): Check force_thumb.
-	(print_insn_little_arm): Check force_thumb.
+	* msp430-dis.c (msp430_doubleoperand): Check for an 'add'
+	instruction which looks similar to an 'rla' instruction.
 
-For older changes see ChangeLog-9899
+For older changes see ChangeLog-0203
 
 Local Variables:
 mode: change-log