* Makefile.am (mpw): New maintainer mode rule to make mpw-*.c files.

	* Makefile.in: Regenerate.
	* mpw-elfmips.c: Delete.
	* mpw-eppcmac.c: Delete.
	* mpw-esh.c: Delete.
	* mpw-idtmips.c: Delete.

7 files changed, 55 insertions, 3416 deletions

diff --git a/ld/ChangeLog b/ld/ChangeLog
index 9ec7c8e..f074b07 100644
--- a/ld/ChangeLog
+++ b/ld/ChangeLog
@@ -1,3 +1,12 @@
+2002-04-28  Alan Modra  <amodra@bigpond.net.au>
+
+	* Makefile.am (mpw): New maintainer mode rule to make mpw-*.c files.
+	* Makefile.in: Regenerate.
+	* mpw-elfmips.c: Delete.
+	* mpw-eppcmac.c: Delete.
+	* mpw-esh.c: Delete.
+	* mpw-idtmips.c: Delete.
+
 Wed Apr 17 19:23:14 2002  J"orn Rennecke <joern.rennecke@superh.com>
 
 	* emulparams/shelf32.sh (MACHINE): Now sh5.
diff --git a/ld/Makefile.am b/ld/Makefile.am
index a8486af..4dbc1f4 100644
--- a/ld/Makefile.am
+++ b/ld/Makefile.am
@@ -1202,6 +1202,29 @@ dep-am: DEP
 
 .PHONY: dep dep-in dep-am
 
+@MAINT@.PHONY: mpw
+@MAINT@mpw: $(srcdir)/mpw-ei386go32.c $(srcdir)/mpw-elfmips.c \
+@MAINT@	$(srcdir)/mpw-em68kcoff.c $(srcdir)/mpw-eppcmac.c \
+@MAINT@	$(srcdir)/mpw-esh.c $(srcdir)/mpw-idtmips.c
+@MAINT@
+@MAINT@$(srcdir)/mpw-ei386go32.c: ei386go32.c
+@MAINT@	$(srcdir)/../move-if-change $< $@
+@MAINT@
+@MAINT@$(srcdir)/mpw-elfmips.c: eelf32ebmip.c
+@MAINT@	$(srcdir)/../move-if-change $< $@
+@MAINT@
+@MAINT@$(srcdir)/mpw-em68kcoff.c: em68kcoff.c
+@MAINT@	$(srcdir)/../move-if-change $< $@
+@MAINT@
+@MAINT@$(srcdir)/mpw-eppcmac.c: eppcmacos.c
+@MAINT@	$(srcdir)/../move-if-change $< $@
+@MAINT@
+@MAINT@$(srcdir)/mpw-esh.c: esh.c
+@MAINT@	$(srcdir)/../move-if-change $< $@
+@MAINT@
+@MAINT@$(srcdir)/mpw-idtmips.c: emipsidt.c
+@MAINT@	$(srcdir)/../move-if-change $< $@
+
 # What appears below is generated by a hacked mkdep using gcc -MM.
 
 # DO NOT DELETE THIS LINE -- mkdep uses it.
diff --git a/ld/Makefile.in b/ld/Makefile.in
index b4b1597..213628b 100644
--- a/ld/Makefile.in
+++ b/ld/Makefile.in
@@ -1897,6 +1897,29 @@ dep-am: DEP
 
 .PHONY: dep dep-in dep-am
 
+@MAINT@.PHONY: mpw
+@MAINT@mpw: $(srcdir)/mpw-ei386go32.c $(srcdir)/mpw-elfmips.c \
+@MAINT@	$(srcdir)/mpw-em68kcoff.c $(srcdir)/mpw-eppcmac.c \
+@MAINT@	$(srcdir)/mpw-esh.c $(srcdir)/mpw-idtmips.c
+@MAINT@
+@MAINT@$(srcdir)/mpw-ei386go32.c: ei386go32.c
+@MAINT@	$(srcdir)/../move-if-change $< $@
+@MAINT@
+@MAINT@$(srcdir)/mpw-elfmips.c: eelf32ebmip.c
+@MAINT@	$(srcdir)/../move-if-change $< $@
+@MAINT@
+@MAINT@$(srcdir)/mpw-em68kcoff.c: em68kcoff.c
+@MAINT@	$(srcdir)/../move-if-change $< $@
+@MAINT@
+@MAINT@$(srcdir)/mpw-eppcmac.c: eppcmacos.c
+@MAINT@	$(srcdir)/../move-if-change $< $@
+@MAINT@
+@MAINT@$(srcdir)/mpw-esh.c: esh.c
+@MAINT@	$(srcdir)/../move-if-change $< $@
+@MAINT@
+@MAINT@$(srcdir)/mpw-idtmips.c: emipsidt.c
+@MAINT@	$(srcdir)/../move-if-change $< $@
+
 # What appears below is generated by a hacked mkdep using gcc -MM.
 
 # DO NOT DELETE THIS LINE -- mkdep uses it.
diff --git a/ld/mpw-elfmips.c b/ld/mpw-elfmips.c
deleted file mode 100644
index 70ceecd..0000000
--- a/ld/mpw-elfmips.c
+++ /dev/null
@@ -1,1441 +0,0 @@
-/* This file is is generated by a shell script.  DO NOT EDIT! */
-
-/* 32 bit ELF emulation code for elf32ebmip
-   Copyright 1991, 1993, 1994, 1995, 1996, 1997, 1999, 2000, 2001
-   Free Software Foundation, Inc.
-   Written by Steve Chamberlain <sac@cygnus.com>
-   ELF support by Ian Lance Taylor <ian@cygnus.com>
-
-This file is part of GLD, the Gnu Linker.
-
-This program is free software; you can redistribute it and/or modify
-it under the terms of the GNU General Public License as published by
-the Free Software Foundation; either version 2 of the License, or
-(at your option) any later version.
-
-This program is distributed in the hope that it will be useful,
-but WITHOUT ANY WARRANTY; without even the implied warranty of
-MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-GNU General Public License for more details.
-
-You should have received a copy of the GNU General Public License
-along with this program; if not, write to the Free Software
-Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  */
-
-#define TARGET_IS_elf32ebmip
-
-#include "bfd.h"
-#include "sysdep.h"
-#include "safe-ctype.h"
-
-#include "bfdlink.h"
-
-#include "ld.h"
-#include "ldmain.h"
-#include "ldmisc.h"
-#include "ldexp.h"
-#include "ldlang.h"
-#include "ldgram.h"
-#include "ldfile.h"
-#include "ldemul.h"
-
-static void gldelf32ebmip_before_parse PARAMS ((void));
-static boolean gldelf32ebmip_open_dynamic_archive
-  PARAMS ((const char *, search_dirs_type *, lang_input_statement_type *));
-static void gldelf32ebmip_after_open PARAMS ((void));
-static void gldelf32ebmip_check_needed
-  PARAMS ((lang_input_statement_type *));
-static void gldelf32ebmip_stat_needed
-  PARAMS ((lang_input_statement_type *));
-static boolean gldelf32ebmip_search_needed
-  PARAMS ((const char *, const char *));
-static boolean gldelf32ebmip_try_needed PARAMS ((const char *));
-static void gldelf32ebmip_before_allocation PARAMS ((void));
-static void gldelf32ebmip_find_statement_assignment
-  PARAMS ((lang_statement_union_type *));
-static void gldelf32ebmip_find_exp_assignment PARAMS ((etree_type *));
-static boolean gldelf32ebmip_place_orphan
-  PARAMS ((lang_input_statement_type *, asection *));
-static void gldelf32ebmip_place_section
-  PARAMS ((lang_statement_union_type *));
-static char *gldelf32ebmip_get_script PARAMS ((int *isfile));
-
-static void
-gldelf32ebmip_before_parse()
-{
-  ldfile_output_architecture = bfd_arch_mips;
-  config.dynamic_link = true;
-}
-
-/* Try to open a dynamic archive.  This is where we know that ELF
-   dynamic libraries have an extension of .so.  */
-
-static boolean
-gldelf32ebmip_open_dynamic_archive (arch, search, entry)
-     const char *arch;
-     search_dirs_type *search;
-     lang_input_statement_type *entry;
-{
-  const char *filename;
-  char *string;
-
-  if (! entry->is_archive)
-    return false;
-
-  filename = entry->filename;
-
-  string = (char *) xmalloc (strlen (search->name)
-			     + strlen (filename)
-			     + strlen (arch)
-			     + sizeof "/lib.so");
-
-  sprintf (string, "%s/lib%s%s.so", search->name, filename, arch);
-
-  if (! ldfile_try_open_bfd (string, entry))
-    {
-      free (string);
-      return false;
-    }
-
-  entry->filename = string;
-
-  /* We have found a dynamic object to include in the link.  The ELF
-     backend linker will create a DT_NEEDED entry in the .dynamic
-     section naming this file.  If this file includes a DT_SONAME
-     entry, it will be used.  Otherwise, the ELF linker will just use
-     the name of the file.  For an archive found by searching, like
-     this one, the DT_NEEDED entry should consist of just the name of
-     the file, without the path information used to find it.  Note
-     that we only need to do this if we have a dynamic object; an
-     archive will never be referenced by a DT_NEEDED entry.
-
-     FIXME: This approach--using bfd_elf_set_dt_needed_name--is not
-     very pretty.  I haven't been able to think of anything that is
-     pretty, though.  */
-  if (bfd_check_format (entry->the_bfd, bfd_object)
-      && (entry->the_bfd->flags & DYNAMIC) != 0)
-    {
-      char *needed_name;
-
-      ASSERT (entry->is_archive && entry->search_dirs_flag);
-      needed_name = (char *) xmalloc (strlen (filename)
-				      + strlen (arch)
-				      + sizeof "lib.so");
-      sprintf (needed_name, "lib%s%s.so", filename, arch);
-      bfd_elf_set_dt_needed_name (entry->the_bfd, needed_name);
-    }
-
-  return true;
-}
-
-
-/* These variables are required to pass information back and forth
-   between after_open and check_needed and stat_needed.  */
-
-static struct bfd_link_needed_list *global_needed;
-static struct stat global_stat;
-static boolean global_found;
-
-/* This is called after all the input files have been opened.  */
-
-static void
-gldelf32ebmip_after_open ()
-{
-  struct bfd_link_needed_list *needed, *l;
-
-  /* We only need to worry about this when doing a final link.  */
-  if (link_info.relocateable || link_info.shared)
-    return;
-
-  /* Get the list of files which appear in DT_NEEDED entries in
-     dynamic objects included in the link (often there will be none).
-     For each such file, we want to track down the corresponding
-     library, and include the symbol table in the link.  This is what
-     the runtime dynamic linker will do.  Tracking the files down here
-     permits one dynamic object to include another without requiring
-     special action by the person doing the link.  Note that the
-     needed list can actually grow while we are stepping through this
-     loop.  */
-  needed = bfd_elf_get_needed_list (output_bfd, &link_info);
-  for (l = needed; l != NULL; l = l->next)
-    {
-      struct bfd_link_needed_list *ll;
-      const char *lib_path;
-      size_t len;
-      search_dirs_type *search;
-
-      /* If we've already seen this file, skip it.  */
-      for (ll = needed; ll != l; ll = ll->next)
-	if (strcmp (ll->name, l->name) == 0)
-	  break;
-      if (ll != l)
-	continue;
-
-      /* See if this file was included in the link explicitly.  */
-      global_needed = l;
-      global_found = false;
-      lang_for_each_input_file (gldelf32ebmip_check_needed);
-      if (global_found)
-	continue;
-
-      /* We need to find this file and include the symbol table.  We
-	 want to search for the file in the same way that the dynamic
-	 linker will search.  That means that we want to use
-	 rpath_link, rpath, then the environment variable
-	 LD_LIBRARY_PATH (native only), then the linker script
-	 LIB_SEARCH_DIRS.  We do not search using the -L arguments.  */
-      if (gldelf32ebmip_search_needed (command_line.rpath_link,
-					      l->name))
-	continue;
-      if (gldelf32ebmip_search_needed (command_line.rpath, l->name))
-	continue;
-      if (command_line.rpath_link == NULL
-	  && command_line.rpath == NULL)
-	{
-	  lib_path = (const char *) getenv ("LD_RUN_PATH");
-	  if (gldelf32ebmip_search_needed (lib_path, l->name))
-	    continue;
-	}
-      len = strlen (l->name);
-      for (search = search_head; search != NULL; search = search->next)
-	{
-	  char *filename;
-
-	  if (search->cmdline)
-	    continue;
-	  filename = (char *) xmalloc (strlen (search->name) + len + 2);
-	  sprintf (filename, "%s/%s", search->name, l->name);
-	  if (gldelf32ebmip_try_needed (filename))
-	    break;
-	  free (filename);
-	}
-      if (search != NULL)
-	continue;
-
-      einfo (_("%P: warning: %s, needed by %B, not found\n"),
-	     l->name, l->by);
-    }
-}
-
-/* Search for a needed file in a path.  */
-
-static boolean
-gldelf32ebmip_search_needed (path, name)
-     const char *path;
-     const char *name;
-{
-  const char *s;
-  size_t len;
-
-  if (path == NULL || *path == '\0')
-    return false;
-  len = strlen (name);
-  while (1)
-    {
-      char *filename, *sset;
-
-      s = strchr (path, ':');
-      if (s == NULL)
-	s = path + strlen (path);
-
-      filename = (char *) xmalloc (s - path + len + 2);
-      if (s == path)
-	sset = filename;
-      else
-	{
-	  memcpy (filename, path, s - path);
-	  filename[s - path] = '/';
-	  sset = filename + (s - path) + 1;
-	}
-      strcpy (sset, name);
-
-      if (gldelf32ebmip_try_needed (filename))
-	return true;
-
-      free (filename);
-
-      if (*s == '\0')
-	break;
-      path = s + 1;
-    }
-
-  return false;	  
-}
-
-/* This function is called for each possible name for a dynamic object
-   named by a DT_NEEDED entry.  */
-
-static boolean
-gldelf32ebmip_try_needed (name)
-     const char *name;
-{
-  bfd *abfd;
-
-  abfd = bfd_openr (name, bfd_get_target (output_bfd));
-  if (abfd == NULL)
-    return false;
-  if (! bfd_check_format (abfd, bfd_object))
-    {
-      (void) bfd_close (abfd);
-      return false;
-    }
-  if ((bfd_get_file_flags (abfd) & DYNAMIC) == 0)
-    {
-      (void) bfd_close (abfd);
-      return false;
-    }
-
-  /* We've found a dynamic object matching the DT_NEEDED entry.  */
-
-  /* We have already checked that there is no other input file of the
-     same name.  We must now check again that we are not including the
-     same file twice.  We need to do this because on many systems
-     libc.so is a symlink to, e.g., libc.so.1.  The SONAME entry will
-     reference libc.so.1.  If we have already included libc.so, we
-     don't want to include libc.so.1 if they are the same file, and we
-     can only check that using stat.  */
-
-  if (bfd_stat (abfd, &global_stat) != 0)
-    einfo (_("%F%P:%B: bfd_stat failed: %E\n"), abfd);
-  global_found = false;
-  lang_for_each_input_file (gldelf32ebmip_stat_needed);
-  if (global_found)
-    {
-      /* Return true to indicate that we found the file, even though
-         we aren't going to do anything with it.  */
-      return true;
-    }
-
-  /* Tell the ELF backend that don't want the output file to have a
-     DT_NEEDED entry for this file.  */
-  bfd_elf_set_dt_needed_name (abfd, "");
-
-  /* Add this file into the symbol table.  */
-  if (! bfd_link_add_symbols (abfd, &link_info))
-    einfo (_("%F%B: could not read symbols: %E\n"), abfd);
-
-  return true;
-}
-
-/* See if an input file matches a DT_NEEDED entry by name.  */
-
-static void
-gldelf32ebmip_check_needed (s)
-     lang_input_statement_type *s;
-{
-  if (global_found)
-    return;
-
-  if (s->filename != NULL
-      && strcmp (s->filename, global_needed->name) == 0)
-    {
-      global_found = true;
-      return;
-    }
-
-  if (s->the_bfd != NULL)
-    {
-      const char *soname;
-
-      soname = bfd_elf_get_dt_soname (s->the_bfd);
-      if (soname != NULL
-	  && strcmp (soname, global_needed->name) == 0)
-	{
-	  global_found = true;
-	  return;
-	}
-    }
-	  
-  if (s->search_dirs_flag
-      && s->filename != NULL
-      && strchr (global_needed->name, '/') == NULL)
-    {
-      const char *f;
-
-      f = strrchr (s->filename, '/');
-      if (f != NULL
-	  && strcmp (f + 1, global_needed->name) == 0)
-	{
-	  global_found = true;
-	  return;
-	}
-    }
-}
-
-/* See if an input file matches a DT_NEEDED entry by running stat on
-   the file.  */
-
-static void
-gldelf32ebmip_stat_needed (s)
-     lang_input_statement_type *s;
-{
-  struct stat st;
-  const char *suffix;
-  const char *soname;
-  const char *f;
-
-  if (global_found)
-    return;
-  if (s->the_bfd == NULL)
-    return;
-
-  if (bfd_stat (s->the_bfd, &st) != 0)
-    {
-      einfo (_("%P:%B: bfd_stat failed: %E\n"), s->the_bfd);
-      return;
-    }
-
-  if (st.st_dev == global_stat.st_dev
-      && st.st_ino == global_stat.st_ino)
-    {
-      global_found = true;
-      return;
-    }
-
-  /* We issue a warning if it looks like we are including two
-     different versions of the same shared library.  For example,
-     there may be a problem if -lc picks up libc.so.6 but some other
-     shared library has a DT_NEEDED entry of libc.so.5.  This is a
-     hueristic test, and it will only work if the name looks like
-     NAME.so.VERSION.  FIXME: Depending on file names is error-prone.
-     If we really want to issue warnings about mixing version numbers
-     of shared libraries, we need to find a better way.  */
-
-  if (strchr (global_needed->name, '/') != NULL)
-    return;
-  suffix = strstr (global_needed->name, ".so.");
-  if (suffix == NULL)
-    return;
-  suffix += sizeof ".so." - 1;
-
-  soname = bfd_elf_get_dt_soname (s->the_bfd);
-  if (soname == NULL)
-    soname = s->filename;
-
-  f = strrchr (soname, '/');
-  if (f != NULL)
-    ++f;
-  else
-    f = soname;
-
-  if (strncmp (f, global_needed->name, suffix - global_needed->name) == 0)
-    einfo (_("%P: warning: %s, needed by %B, may conflict with %s\n"),
-	   global_needed->name, global_needed->by, f);
-}
-
-/* This is called after the sections have been attached to output
-   sections, but before any sizes or addresses have been set.  */
-
-static void
-gldelf32ebmip_before_allocation ()
-{
-  const char *rpath;
-  asection *sinterp;
-
-  /* If we are going to make any variable assignments, we need to let
-     the ELF backend know about them in case the variables are
-     referred to by dynamic objects.  */
-  lang_for_each_statement (gldelf32ebmip_find_statement_assignment);
-
-  /* Let the ELF backend work out the sizes of any sections required
-     by dynamic linking.  */
-  rpath = command_line.rpath;
-  if (rpath == NULL)
-    rpath = (const char *) getenv ("LD_RUN_PATH");
-  if (! (bfd_elf32_size_dynamic_sections
-	 (output_bfd, command_line.soname, rpath,
-	  command_line.filter_shlib,
-	  (const char * const *) command_line.auxiliary_filters,
-	  &link_info, &sinterp, lang_elf_version_info)))
-    einfo (_("%P%F: failed to set dynamic section sizes: %E\n"));
-
-  /* Let the user override the dynamic linker we are using.  */
-  if (command_line.interpreter != NULL
-      && sinterp != NULL)
-    {
-      sinterp->contents = (bfd_byte *) command_line.interpreter;
-      sinterp->_raw_size = strlen (command_line.interpreter) + 1;
-    }
-
-  /* Look for any sections named .gnu.warning.  As a GNU extensions,
-     we treat such sections as containing warning messages.  We print
-     out the warning message, and then zero out the section size so
-     that it does not get copied into the output file.  */
-
-  {
-    LANG_FOR_EACH_INPUT_STATEMENT (is)
-      {
-	asection *s;
-	bfd_size_type sz;
-	char *msg;
-	boolean ret;
-
-	if (is->just_syms_flag)
-	  continue;
-
-	s = bfd_get_section_by_name (is->the_bfd, ".gnu.warning");
-	if (s == NULL)
-	  continue;
-
-	sz = bfd_section_size (is->the_bfd, s);
-	msg = xmalloc ((size_t) sz + 1);
-	if (! bfd_get_section_contents (is->the_bfd, s, msg, (file_ptr) 0, sz))
-	  einfo (_("%F%B: Can't read contents of section .gnu.warning: %E\n"),
-		 is->the_bfd);
-	msg[sz] = '\0';
-	ret = link_info.callbacks->warning (&link_info, msg,
-					    (const char *) NULL,
-					    is->the_bfd, (asection *) NULL,
-					    (bfd_vma) 0);
-	ASSERT (ret);
-	free (msg);
-
-	/* Clobber the section size, so that we don't waste copying the
-	   warning into the output file.  */
-	s->_raw_size = 0;
-      }
-  }
-}
-
-/* This is called by the before_allocation routine via
-   lang_for_each_statement.  It locates any assignment statements, and
-   tells the ELF backend about them, in case they are assignments to
-   symbols which are referred to by dynamic objects.  */
-
-static void
-gldelf32ebmip_find_statement_assignment (s)
-     lang_statement_union_type *s;
-{
-  if (s->header.type == lang_assignment_statement_enum)
-    gldelf32ebmip_find_exp_assignment (s->assignment_statement.exp);
-}
-
-/* Look through an expression for an assignment statement.  */
-
-static void
-gldelf32ebmip_find_exp_assignment (exp)
-     etree_type *exp;
-{
-  struct bfd_link_hash_entry *h;
-
-  switch (exp->type.node_class)
-    {
-    case etree_provide:
-    case etree_provided:
-      h = bfd_link_hash_lookup (link_info.hash, exp->assign.dst,
-				false, false, false);
-      if (h == NULL)
-	break;
-
-      /* We call record_link_assignment even if the symbol is defined.
-	 This is because if it is defined by a dynamic object, we
-	 actually want to use the value defined by the linker script,
-	 not the value from the dynamic object (because we are setting
-	 symbols like etext).  If the symbol is defined by a regular
-	 object, then, as it happens, calling record_link_assignment
-	 will do no harm.  */
-
-      /* Fall through.  */
-    case etree_assign:
-      if (strcmp (exp->assign.dst, ".") != 0)
-	{
-	  if (! (bfd_elf32_record_link_assignment
-		 (output_bfd, &link_info, exp->assign.dst,
-		  exp->type.node_class != etree_assign ? true : false)))
-	    einfo (_("%P%F: failed to record assignment to %s: %E\n"),
-		   exp->assign.dst);
-	}
-      gldelf32ebmip_find_exp_assignment (exp->assign.src);
-      break;
-
-    case etree_binary:
-      gldelf32ebmip_find_exp_assignment (exp->binary.lhs);
-      gldelf32ebmip_find_exp_assignment (exp->binary.rhs);
-      break;
-
-    case etree_trinary:
-      gldelf32ebmip_find_exp_assignment (exp->trinary.cond);
-      gldelf32ebmip_find_exp_assignment (exp->trinary.lhs);
-      gldelf32ebmip_find_exp_assignment (exp->trinary.rhs);
-      break;
-
-    case etree_unary:
-      gldelf32ebmip_find_exp_assignment (exp->unary.child);
-      break;
-
-    default:
-      break;
-    }
-}
-
-/* Place an orphan section.  We use this to put random SHF_ALLOC
-   sections in the right segment.  */
-
-static asection *hold_section;
-static lang_output_section_statement_type *hold_use;
-static lang_output_section_statement_type *hold_text;
-static lang_output_section_statement_type *hold_rodata;
-static lang_output_section_statement_type *hold_data;
-static lang_output_section_statement_type *hold_bss;
-static lang_output_section_statement_type *hold_rel;
-
-/*ARGSUSED*/
-static boolean
-gldelf32ebmip_place_orphan (file, s)
-     lang_input_statement_type *file;
-     asection *s;
-{
-  lang_output_section_statement_type *place;
-  asection *snew, **pps;
-  lang_statement_list_type *old;
-  lang_statement_list_type add;
-  etree_type *address;
-  const char *secname, *ps;
-  lang_output_section_statement_type *os;
-
-  if ((s->flags & SEC_ALLOC) == 0)
-    return false;
-
-  /* Look through the script to see where to place this section.  */
-  hold_section = s;
-  hold_use = NULL;
-  lang_for_each_statement (gldelf32ebmip_place_section);
-
-  if (hold_use != NULL)
-    {
-      /* We have already placed a section with this name.  */
-      lang_add_section (&hold_use->children, s, hold_use, file);
-      return true;
-    }
-
-  secname = bfd_get_section_name (s->owner, s);
-
-  /* If this is a final link, then always put .gnu.warning.SYMBOL
-     sections into the .text section to get them out of the way.  */
-  if (! link_info.shared
-      && ! link_info.relocateable
-      && strncmp (secname, ".gnu.warning.", sizeof ".gnu.warning." - 1) == 0
-      && hold_text != NULL)
-    {
-      lang_add_section (&hold_text->children, s, hold_text, file);
-      return true;
-    }
-
-  /* Decide which segment the section should go in based on the
-     section name and section flags.  */
-  place = NULL;
-  if ((s->flags & SEC_HAS_CONTENTS) == 0
-      && hold_bss != NULL)
-    place = hold_bss;
-  else if ((s->flags & SEC_READONLY) == 0
-	   && hold_data != NULL)
-    place = hold_data;
-  else if (strncmp (secname, ".rel", 4) == 0
-	   && hold_rel != NULL)
-    place = hold_rel;
-  else if ((s->flags & SEC_CODE) == 0
-	   && (s->flags & SEC_READONLY) != 0
-	   && hold_rodata != NULL)
-    place = hold_rodata;
-  else if ((s->flags & SEC_READONLY) != 0
-	   && hold_text != NULL)
-    place = hold_text;
-  if (place == NULL)
-    return false;
-
-  /* Create the section in the output file, and put it in the right
-     place.  This shuffling is to make the output file look neater.  */
-  snew = bfd_make_section (output_bfd, secname);
-  if (snew == NULL)
-      einfo (_("%P%F: output format %s cannot represent section called %s\n"),
-	     output_bfd->xvec->name, secname);
-  if (place->bfd_section != NULL)
-    {
-      for (pps = &output_bfd->sections; *pps != snew; pps = &(*pps)->next)
-	;
-      *pps = snew->next;
-      snew->next = place->bfd_section->next;
-      place->bfd_section->next = snew;
-    }
-
-  /* Start building a list of statements for this section.  */
-  old = stat_ptr;
-  stat_ptr = &add;
-  lang_list_init (stat_ptr);
-
-  /* If the name of the section is representable in C, then create
-     symbols to mark the start and the end of the section.  */
-  for (ps = secname; *ps != '\0'; ps++)
-    if (! ISALNUM (*ps) && *ps != '_')
-      break;
-  if (*ps == '\0' && config.build_constructors)
-    {
-      char *symname;
-
-      symname = (char *) xmalloc (ps - secname + sizeof "__start_");
-      sprintf (symname, "__start_%s", secname);
-      lang_add_assignment (exp_assop ('=', symname,
-				      exp_unop (ALIGN_K,
-						exp_intop ((bfd_vma) 1
-							   << s->alignment_power))));
-    }
-
-  if (! link_info.relocateable)
-    address = NULL;
-  else
-    address = exp_intop ((bfd_vma) 0);
-
-  lang_enter_output_section_statement (secname, address, 0,
-				       (bfd_vma) 0,
-				       (etree_type *) NULL,
-				       (etree_type *) NULL,
-				       (etree_type *) NULL);
-
-  os = lang_output_section_statement_lookup (secname);
-  lang_add_section (&os->children, s, os, file);
-
-  lang_leave_output_section_statement
-    ((bfd_vma) 0, "*default*",
-     (struct lang_output_section_phdr_list *) NULL, "*default*");
-  stat_ptr = &add;
-
-  if (*ps == '\0' && config.build_constructors)
-    {
-      char *symname;
-
-      symname = (char *) xmalloc (ps - secname + sizeof "__stop_");
-      sprintf (symname, "__stop_%s", secname);
-      lang_add_assignment (exp_assop ('=', symname,
-				      exp_nameop (NAME, ".")));
-    }
-
-  /* Now stick the new statement list right after PLACE.  */
-  *add.tail = place->header.next;
-  place->header.next = add.head;
-
-  stat_ptr = old;
-
-  return true;
-}
-
-static void
-gldelf32ebmip_place_section (s)
-     lang_statement_union_type *s;
-{
-  lang_output_section_statement_type *os;
-
-  if (s->header.type != lang_output_section_statement_enum)
-    return;
-
-  os = &s->output_section_statement;
-
-  if (strcmp (os->name, hold_section->name) == 0)
-    hold_use = os;
-
-  if (strcmp (os->name, ".text") == 0)
-    hold_text = os;
-  else if (strcmp (os->name, ".rodata") == 0)
-    hold_rodata = os;
-  else if (strcmp (os->name, ".data") == 0)
-    hold_data = os;
-  else if (strcmp (os->name, ".bss") == 0)
-    hold_bss = os;
-  else if (hold_rel == NULL
-	   && os->bfd_section != NULL
-	   && strncmp (os->name, ".rel", 4) == 0)
-    hold_rel = os;
-}
-
-static char *
-gldelf32ebmip_get_script(isfile)
-     int *isfile;
-{			     
-  *isfile = 0;
-
-  if (link_info.relocateable == true && config.build_constructors == true)
-    return "OUTPUT_FORMAT(\"elf32-bigmips\", \"elf32-bigmips\",\n\
-	      \"elf32-littlemips\")\n\
-OUTPUT_ARCH(mips)\n\
-ENTRY(_start)\n\
- /* For some reason, the Solaris linker makes bad executables\n\
-  if gld -r is used and the intermediate file has sections starting\n\
-  at non-zero addresses.  Could be a Solaris ld bug, could be a GNU ld\n\
-  bug.  But for now assigning the zero vmas works.  */\n\
-SECTIONS\n\
-{\n\
-  /* Read-only sections, merged into text segment: */\n\
-  .interp   0 : { *(.interp) 	}\n\
-  .reginfo     0 : { *(.reginfo) }\n\
-  .dynamic     0 : { *(.dynamic) }\n\
-  .dynstr      0 : { *(.dynstr)		}\n\
-  .dynsym      0 : { *(.dynsym)		}\n\
-  .hash        0 : { *(.hash)		}\n\
-  .rel.text    0 : { *(.rel.text)		}\n\
-  .rela.text   0 : { *(.rela.text) 	}\n\
-  .rel.data    0 : { *(.rel.data)		}\n\
-  .rela.data   0 : { *(.rela.data) 	}\n\
-  .rel.rodata  0 : { *(.rel.rodata) 	}\n\
-  .rela.rodata 0 : { *(.rela.rodata) 	}\n\
-  .rel.got     0 : { *(.rel.got)		}\n\
-  .rela.got    0 : { *(.rela.got)		}\n\
-  .rel.ctors   0 : { *(.rel.ctors)	}\n\
-  .rela.ctors  0 : { *(.rela.ctors)	}\n\
-  .rel.dtors   0 : { *(.rel.dtors)	}\n\
-  .rela.dtors  0 : { *(.rela.dtors)	}\n\
-  .rel.init    0 : { *(.rel.init)	}\n\
-  .rela.init   0 : { *(.rela.init)	}\n\
-  .rel.fini    0 : { *(.rel.fini)	}\n\
-  .rela.fini   0 : { *(.rela.fini)	}\n\
-  .rel.bss     0 : { *(.rel.bss)		}\n\
-  .rela.bss    0 : { *(.rela.bss)		}\n\
-  .rel.plt     0 : { *(.rel.plt)		}\n\
-  .rela.plt    0 : { *(.rela.plt)		}\n\
-  .rodata  0 : { *(.rodata)  }\n\
-  .rodata1 0 : { *(.rodata1) }\n\
-  .init        0 : { *(.init)	} =0\n\
-  .text    0 :\n\
-  {\n\
-    *(.text)\n\
-    *(.stub)\n\
-    /* .gnu.warning sections are handled specially by elf32.em.  */\n\
-    *(.gnu.warning)\n\
-  } =0\n\
-  .fini    0 : { *(.fini)    } =0\n\
-  /* Adjust the address for the data segment.  We want to adjust up to\n\
-     the same address within the page on the next page up.  It would\n\
-     be more correct to do this:\n\
-     The current expression does not correctly handle the case of a\n\
-     text segment ending precisely at the end of a page; it causes the\n\
-     data segment to skip a page.  The above expression does not have\n\
-     this problem, but it will currently (2/95) cause BFD to allocate\n\
-     a single segment, combining both text and data, for this case.\n\
-     This will prevent the text segment from being shared among\n\
-     multiple executions of the program; I think that is more\n\
-     important than losing a page of the virtual address space (note\n\
-     that no actual memory is lost; the page which is skipped can not\n\
-     be referenced).  */\n\
-  .data  0 :\n\
-  {\n\
-    *(.data)\n\
-    CONSTRUCTORS\n\
-  }\n\
-  .data1 0 : { *(.data1) }\n\
-  .ctors       0 : { *(.ctors)   }\n\
-  .dtors       0 : { *(.dtors)   }\n\
-  .got         0 :\n\
-  {\n\
-    *(.got.plt) *(.got)\n\
-   }\n\
-  /* We want the small data sections together, so single-instruction offsets\n\
-     can access them all, and initialized data all before uninitialized, so\n\
-     we can shorten the on-disk segment size.  */\n\
-  .sdata   0 : { *(.sdata) }\n\
-  .sbss    0 : { *(.sbss) *(.scommon) }\n\
-  .bss     0 :\n\
-  {\n\
-   *(.dynbss)\n\
-   *(.bss)\n\
-   *(COMMON)\n\
-  }\n\
-  /* These are needed for ELF backends which have not yet been\n\
-     converted to the new style linker.  */\n\
-  .stab 0 : { *(.stab) }\n\
-  .stabstr 0 : { *(.stabstr) }\n\
-  /* DWARF debug sections.\n\
-     Symbols in the .debug DWARF section are relative to the beginning of the\n\
-     section so we begin .debug at 0.  It's not clear yet what needs to happen\n\
-     for the others.   */\n\
-  .debug          0 : { *(.debug) }\n\
-  .debug_srcinfo  0 : { *(.debug_srcinfo) }\n\
-  .debug_aranges  0 : { *(.debug_aranges) }\n\
-  .debug_pubnames 0 : { *(.debug_pubnames) }\n\
-  .debug_sfnames  0 : { *(.debug_sfnames) }\n\
-  .line           0 : { *(.line) }\n\
-  /* These must appear regardless of .  */\n\
-  .gptab.sdata : { *(.gptab.data) *(.gptab.sdata) }\n\
-  .gptab.sbss : { *(.gptab.bss) *(.gptab.sbss) }\n\
-}\n\n";
-  else if (link_info.relocateable == true)
-    return "OUTPUT_FORMAT(\"elf32-bigmips\", \"elf32-bigmips\",\n\
-	      \"elf32-littlemips\")\n\
-OUTPUT_ARCH(mips)\n\
-ENTRY(_start)\n\
- /* For some reason, the Solaris linker makes bad executables\n\
-  if gld -r is used and the intermediate file has sections starting\n\
-  at non-zero addresses.  Could be a Solaris ld bug, could be a GNU ld\n\
-  bug.  But for now assigning the zero vmas works.  */\n\
-SECTIONS\n\
-{\n\
-  /* Read-only sections, merged into text segment: */\n\
-  .interp   0 : { *(.interp) 	}\n\
-  .reginfo     0 : { *(.reginfo) }\n\
-  .dynamic     0 : { *(.dynamic) }\n\
-  .dynstr      0 : { *(.dynstr)		}\n\
-  .dynsym      0 : { *(.dynsym)		}\n\
-  .hash        0 : { *(.hash)		}\n\
-  .rel.text    0 : { *(.rel.text)		}\n\
-  .rela.text   0 : { *(.rela.text) 	}\n\
-  .rel.data    0 : { *(.rel.data)		}\n\
-  .rela.data   0 : { *(.rela.data) 	}\n\
-  .rel.rodata  0 : { *(.rel.rodata) 	}\n\
-  .rela.rodata 0 : { *(.rela.rodata) 	}\n\
-  .rel.got     0 : { *(.rel.got)		}\n\
-  .rela.got    0 : { *(.rela.got)		}\n\
-  .rel.ctors   0 : { *(.rel.ctors)	}\n\
-  .rela.ctors  0 : { *(.rela.ctors)	}\n\
-  .rel.dtors   0 : { *(.rel.dtors)	}\n\
-  .rela.dtors  0 : { *(.rela.dtors)	}\n\
-  .rel.init    0 : { *(.rel.init)	}\n\
-  .rela.init   0 : { *(.rela.init)	}\n\
-  .rel.fini    0 : { *(.rel.fini)	}\n\
-  .rela.fini   0 : { *(.rela.fini)	}\n\
-  .rel.bss     0 : { *(.rel.bss)		}\n\
-  .rela.bss    0 : { *(.rela.bss)		}\n\
-  .rel.plt     0 : { *(.rel.plt)		}\n\
-  .rela.plt    0 : { *(.rela.plt)		}\n\
-  .rodata  0 : { *(.rodata)  }\n\
-  .rodata1 0 : { *(.rodata1) }\n\
-  .init        0 : { *(.init)	} =0\n\
-  .text    0 :\n\
-  {\n\
-    *(.text)\n\
-    *(.stub)\n\
-    /* .gnu.warning sections are handled specially by elf32.em.  */\n\
-    *(.gnu.warning)\n\
-  } =0\n\
-  .fini    0 : { *(.fini)    } =0\n\
-  /* Adjust the address for the data segment.  We want to adjust up to\n\
-     the same address within the page on the next page up.  It would\n\
-     be more correct to do this:\n\
-     The current expression does not correctly handle the case of a\n\
-     text segment ending precisely at the end of a page; it causes the\n\
-     data segment to skip a page.  The above expression does not have\n\
-     this problem, but it will currently (2/95) cause BFD to allocate\n\
-     a single segment, combining both text and data, for this case.\n\
-     This will prevent the text segment from being shared among\n\
-     multiple executions of the program; I think that is more\n\
-     important than losing a page of the virtual address space (note\n\
-     that no actual memory is lost; the page which is skipped can not\n\
-     be referenced).  */\n\
-  .data  0 :\n\
-  {\n\
-    *(.data)\n\
-  }\n\
-  .data1 0 : { *(.data1) }\n\
-  .ctors       0 : { *(.ctors)   }\n\
-  .dtors       0 : { *(.dtors)   }\n\
-  .got         0 :\n\
-  {\n\
-    *(.got.plt) *(.got)\n\
-   }\n\
-  /* We want the small data sections together, so single-instruction offsets\n\
-     can access them all, and initialized data all before uninitialized, so\n\
-     we can shorten the on-disk segment size.  */\n\
-  .sdata   0 : { *(.sdata) }\n\
-  .sbss    0 : { *(.sbss) *(.scommon) }\n\
-  .bss     0 :\n\
-  {\n\
-   *(.dynbss)\n\
-   *(.bss)\n\
-   *(COMMON)\n\
-  }\n\
-  /* These are needed for ELF backends which have not yet been\n\
-     converted to the new style linker.  */\n\
-  .stab 0 : { *(.stab) }\n\
-  .stabstr 0 : { *(.stabstr) }\n\
-  /* DWARF debug sections.\n\
-     Symbols in the .debug DWARF section are relative to the beginning of the\n\
-     section so we begin .debug at 0.  It's not clear yet what needs to happen\n\
-     for the others.   */\n\
-  .debug          0 : { *(.debug) }\n\
-  .debug_srcinfo  0 : { *(.debug_srcinfo) }\n\
-  .debug_aranges  0 : { *(.debug_aranges) }\n\
-  .debug_pubnames 0 : { *(.debug_pubnames) }\n\
-  .debug_sfnames  0 : { *(.debug_sfnames) }\n\
-  .line           0 : { *(.line) }\n\
-  /* These must appear regardless of .  */\n\
-  .gptab.sdata : { *(.gptab.data) *(.gptab.sdata) }\n\
-  .gptab.sbss : { *(.gptab.bss) *(.gptab.sbss) }\n\
-}\n\n";
-  else if (!config.text_read_only)
-    return "OUTPUT_FORMAT(\"elf32-bigmips\", \"elf32-bigmips\",\n\
-	      \"elf32-littlemips\")\n\
-OUTPUT_ARCH(mips)\n\
-ENTRY(_start)\n\
- SEARCH_DIR(/usr/local/mips-elf/lib);\n\
-/* Do we need any of these for elf?\n\
-   __DYNAMIC = 0;    */\n\
-SECTIONS\n\
-{\n\
-  /* Read-only sections, merged into text segment: */\n\
-  . = 0x0400000;\n\
-  .interp     : { *(.interp) 	}\n\
-  .reginfo       : { *(.reginfo) }\n\
-  .dynamic       : { *(.dynamic) }\n\
-  .dynstr        : { *(.dynstr)		}\n\
-  .dynsym        : { *(.dynsym)		}\n\
-  .hash          : { *(.hash)		}\n\
-  .rel.text      : { *(.rel.text)		}\n\
-  .rela.text     : { *(.rela.text) 	}\n\
-  .rel.data      : { *(.rel.data)		}\n\
-  .rela.data     : { *(.rela.data) 	}\n\
-  .rel.rodata    : { *(.rel.rodata) 	}\n\
-  .rela.rodata   : { *(.rela.rodata) 	}\n\
-  .rel.got       : { *(.rel.got)		}\n\
-  .rela.got      : { *(.rela.got)		}\n\
-  .rel.ctors     : { *(.rel.ctors)	}\n\
-  .rela.ctors    : { *(.rela.ctors)	}\n\
-  .rel.dtors     : { *(.rel.dtors)	}\n\
-  .rela.dtors    : { *(.rela.dtors)	}\n\
-  .rel.init      : { *(.rel.init)	}\n\
-  .rela.init     : { *(.rela.init)	}\n\
-  .rel.fini      : { *(.rel.fini)	}\n\
-  .rela.fini     : { *(.rela.fini)	}\n\
-  .rel.bss       : { *(.rel.bss)		}\n\
-  .rela.bss      : { *(.rela.bss)		}\n\
-  .rel.plt       : { *(.rel.plt)		}\n\
-  .rela.plt      : { *(.rela.plt)		}\n\
-  .rodata    : { *(.rodata)  }\n\
-  .rodata1   : { *(.rodata1) }\n\
-  .init          : { *(.init)	} =0\n\
-  .text      :\n\
-  {\n\
-    _ftext = . ;\n\
-    *(.text)\n\
-    *(.stub)\n\
-    /* .gnu.warning sections are handled specially by elf32.em.  */\n\
-    *(.gnu.warning)\n\
-  } =0\n\
-  _etext = .;\n\
-  PROVIDE (etext = .);\n\
-  .fini      : { *(.fini)    } =0\n\
-  /* Adjust the address for the data segment.  We want to adjust up to\n\
-     the same address within the page on the next page up.  It would\n\
-     be more correct to do this:\n\
-       . = .;\n\
-     The current expression does not correctly handle the case of a\n\
-     text segment ending precisely at the end of a page; it causes the\n\
-     data segment to skip a page.  The above expression does not have\n\
-     this problem, but it will currently (2/95) cause BFD to allocate\n\
-     a single segment, combining both text and data, for this case.\n\
-     This will prevent the text segment from being shared among\n\
-     multiple executions of the program; I think that is more\n\
-     important than losing a page of the virtual address space (note\n\
-     that no actual memory is lost; the page which is skipped can not\n\
-     be referenced).  */\n\
-  . += . - 0x0400000;\n\
-  .data    :\n\
-  {\n\
-    _fdata = . ;\n\
-    *(.data)\n\
-    CONSTRUCTORS\n\
-  }\n\
-  .data1   : { *(.data1) }\n\
-  .ctors         : { *(.ctors)   }\n\
-  .dtors         : { *(.dtors)   }\n\
-  _gp = ALIGN(16) + 0x7ff0;\n\
-  .got           :\n\
-  {\n\
-    *(.got.plt) *(.got)\n\
-   }\n\
-  /* We want the small data sections together, so single-instruction offsets\n\
-     can access them all, and initialized data all before uninitialized, so\n\
-     we can shorten the on-disk segment size.  */\n\
-  .sdata     : { *(.sdata) }\n\
-  .lit8 : { *(.lit8) }\n\
-  .lit4 : { *(.lit4) }\n\
-  _edata  =  .;\n\
-  PROVIDE (edata = .);\n\
-  __bss_start = .;\n\
-  _fbss = .;\n\
-  .sbss      : { *(.sbss) *(.scommon) }\n\
-  .bss       :\n\
-  {\n\
-   *(.dynbss)\n\
-   *(.bss)\n\
-   *(COMMON)\n\
-  }\n\
-  _end = . ;\n\
-  PROVIDE (end = .);\n\
-  /* These are needed for ELF backends which have not yet been\n\
-     converted to the new style linker.  */\n\
-  .stab 0 : { *(.stab) }\n\
-  .stabstr 0 : { *(.stabstr) }\n\
-  /* DWARF debug sections.\n\
-     Symbols in the .debug DWARF section are relative to the beginning of the\n\
-     section so we begin .debug at 0.  It's not clear yet what needs to happen\n\
-     for the others.   */\n\
-  .debug          0 : { *(.debug) }\n\
-  .debug_srcinfo  0 : { *(.debug_srcinfo) }\n\
-  .debug_aranges  0 : { *(.debug_aranges) }\n\
-  .debug_pubnames 0 : { *(.debug_pubnames) }\n\
-  .debug_sfnames  0 : { *(.debug_sfnames) }\n\
-  .line           0 : { *(.line) }\n\
-  /* These must appear regardless of  .  */\n\
-  .gptab.sdata : { *(.gptab.data) *(.gptab.sdata) }\n\
-  .gptab.sbss : { *(.gptab.bss) *(.gptab.sbss) }\n\
-}\n\n";
-  else if (!config.magic_demand_paged)
-    return "OUTPUT_FORMAT(\"elf32-bigmips\", \"elf32-bigmips\",\n\
-	      \"elf32-littlemips\")\n\
-OUTPUT_ARCH(mips)\n\
-ENTRY(_start)\n\
- SEARCH_DIR(/usr/local/mips-elf/lib);\n\
-/* Do we need any of these for elf?\n\
-   __DYNAMIC = 0;    */\n\
-SECTIONS\n\
-{\n\
-  /* Read-only sections, merged into text segment: */\n\
-  . = 0x0400000;\n\
-  .interp     : { *(.interp) 	}\n\
-  .reginfo       : { *(.reginfo) }\n\
-  .dynamic       : { *(.dynamic) }\n\
-  .dynstr        : { *(.dynstr)		}\n\
-  .dynsym        : { *(.dynsym)		}\n\
-  .hash          : { *(.hash)		}\n\
-  .rel.text      : { *(.rel.text)		}\n\
-  .rela.text     : { *(.rela.text) 	}\n\
-  .rel.data      : { *(.rel.data)		}\n\
-  .rela.data     : { *(.rela.data) 	}\n\
-  .rel.rodata    : { *(.rel.rodata) 	}\n\
-  .rela.rodata   : { *(.rela.rodata) 	}\n\
-  .rel.got       : { *(.rel.got)		}\n\
-  .rela.got      : { *(.rela.got)		}\n\
-  .rel.ctors     : { *(.rel.ctors)	}\n\
-  .rela.ctors    : { *(.rela.ctors)	}\n\
-  .rel.dtors     : { *(.rel.dtors)	}\n\
-  .rela.dtors    : { *(.rela.dtors)	}\n\
-  .rel.init      : { *(.rel.init)	}\n\
-  .rela.init     : { *(.rela.init)	}\n\
-  .rel.fini      : { *(.rel.fini)	}\n\
-  .rela.fini     : { *(.rela.fini)	}\n\
-  .rel.bss       : { *(.rel.bss)		}\n\
-  .rela.bss      : { *(.rela.bss)		}\n\
-  .rel.plt       : { *(.rel.plt)		}\n\
-  .rela.plt      : { *(.rela.plt)		}\n\
-  .rodata    : { *(.rodata)  }\n\
-  .rodata1   : { *(.rodata1) }\n\
-  .init          : { *(.init)	} =0\n\
-  .text      :\n\
-  {\n\
-    _ftext = . ;\n\
-    *(.text)\n\
-    *(.stub)\n\
-    /* .gnu.warning sections are handled specially by elf32.em.  */\n\
-    *(.gnu.warning)\n\
-  } =0\n\
-  _etext = .;\n\
-  PROVIDE (etext = .);\n\
-  .fini      : { *(.fini)    } =0\n\
-  /* Adjust the address for the data segment.  We want to adjust up to\n\
-     the same address within the page on the next page up.  It would\n\
-     be more correct to do this:\n\
-       . = 0x10000000;\n\
-     The current expression does not correctly handle the case of a\n\
-     text segment ending precisely at the end of a page; it causes the\n\
-     data segment to skip a page.  The above expression does not have\n\
-     this problem, but it will currently (2/95) cause BFD to allocate\n\
-     a single segment, combining both text and data, for this case.\n\
-     This will prevent the text segment from being shared among\n\
-     multiple executions of the program; I think that is more\n\
-     important than losing a page of the virtual address space (note\n\
-     that no actual memory is lost; the page which is skipped can not\n\
-     be referenced).  */\n\
-  . += 0x10000000 - 0x0400000;\n\
-  .data    :\n\
-  {\n\
-    _fdata = . ;\n\
-    *(.data)\n\
-    CONSTRUCTORS\n\
-  }\n\
-  .data1   : { *(.data1) }\n\
-  .ctors         : { *(.ctors)   }\n\
-  .dtors         : { *(.dtors)   }\n\
-  _gp = ALIGN(16) + 0x7ff0;\n\
-  .got           :\n\
-  {\n\
-    *(.got.plt) *(.got)\n\
-   }\n\
-  /* We want the small data sections together, so single-instruction offsets\n\
-     can access them all, and initialized data all before uninitialized, so\n\
-     we can shorten the on-disk segment size.  */\n\
-  .sdata     : { *(.sdata) }\n\
-  .lit8 : { *(.lit8) }\n\
-  .lit4 : { *(.lit4) }\n\
-  _edata  =  .;\n\
-  PROVIDE (edata = .);\n\
-  __bss_start = .;\n\
-  _fbss = .;\n\
-  .sbss      : { *(.sbss) *(.scommon) }\n\
-  .bss       :\n\
-  {\n\
-   *(.dynbss)\n\
-   *(.bss)\n\
-   *(COMMON)\n\
-  }\n\
-  _end = . ;\n\
-  PROVIDE (end = .);\n\
-  /* These are needed for ELF backends which have not yet been\n\
-     converted to the new style linker.  */\n\
-  .stab 0 : { *(.stab) }\n\
-  .stabstr 0 : { *(.stabstr) }\n\
-  /* DWARF debug sections.\n\
-     Symbols in the .debug DWARF section are relative to the beginning of the\n\
-     section so we begin .debug at 0.  It's not clear yet what needs to happen\n\
-     for the others.   */\n\
-  .debug          0 : { *(.debug) }\n\
-  .debug_srcinfo  0 : { *(.debug_srcinfo) }\n\
-  .debug_aranges  0 : { *(.debug_aranges) }\n\
-  .debug_pubnames 0 : { *(.debug_pubnames) }\n\
-  .debug_sfnames  0 : { *(.debug_sfnames) }\n\
-  .line           0 : { *(.line) }\n\
-  /* These must appear regardless of  .  */\n\
-  .gptab.sdata : { *(.gptab.data) *(.gptab.sdata) }\n\
-  .gptab.sbss : { *(.gptab.bss) *(.gptab.sbss) }\n\
-}\n\n";
-  else if (link_info.shared)
-    return "OUTPUT_FORMAT(\"elf32-bigmips\", \"elf32-bigmips\",\n\
-	      \"elf32-littlemips\")\n\
-OUTPUT_ARCH(mips)\n\
-ENTRY(_start)\n\
- SEARCH_DIR(/usr/local/mips-elf/lib);\n\
-/* Do we need any of these for elf?\n\
-   __DYNAMIC = 0;    */\n\
-SECTIONS\n\
-{\n\
-  /* Read-only sections, merged into text segment: */\n\
-  . = 0x5ffe0000 + SIZEOF_HEADERS;\n\
-  .reginfo       : { *(.reginfo) }\n\
-  .dynamic       : { *(.dynamic) }\n\
-  .dynstr        : { *(.dynstr)		}\n\
-  .dynsym        : { *(.dynsym)		}\n\
-  .hash          : { *(.hash)		}\n\
-  .rel.text      : { *(.rel.text)		}\n\
-  .rela.text     : { *(.rela.text) 	}\n\
-  .rel.data      : { *(.rel.data)		}\n\
-  .rela.data     : { *(.rela.data) 	}\n\
-  .rel.rodata    : { *(.rel.rodata) 	}\n\
-  .rela.rodata   : { *(.rela.rodata) 	}\n\
-  .rel.got       : { *(.rel.got)		}\n\
-  .rela.got      : { *(.rela.got)		}\n\
-  .rel.ctors     : { *(.rel.ctors)	}\n\
-  .rela.ctors    : { *(.rela.ctors)	}\n\
-  .rel.dtors     : { *(.rel.dtors)	}\n\
-  .rela.dtors    : { *(.rela.dtors)	}\n\
-  .rel.init      : { *(.rel.init)	}\n\
-  .rela.init     : { *(.rela.init)	}\n\
-  .rel.fini      : { *(.rel.fini)	}\n\
-  .rela.fini     : { *(.rela.fini)	}\n\
-  .rel.bss       : { *(.rel.bss)		}\n\
-  .rela.bss      : { *(.rela.bss)		}\n\
-  .rel.plt       : { *(.rel.plt)		}\n\
-  .rela.plt      : { *(.rela.plt)		}\n\
-  .rodata    : { *(.rodata)  }\n\
-  .rodata1   : { *(.rodata1) }\n\
-  .init          : { *(.init)	} =0\n\
-  .text      :\n\
-  {\n\
-    *(.text)\n\
-    *(.stub)\n\
-    /* .gnu.warning sections are handled specially by elf32.em.  */\n\
-    *(.gnu.warning)\n\
-  } =0\n\
-  .fini      : { *(.fini)    } =0\n\
-  /* Adjust the address for the data segment.  We want to adjust up to\n\
-     the same address within the page on the next page up.  It would\n\
-     be more correct to do this:\n\
-       . = 0x10000000;\n\
-     The current expression does not correctly handle the case of a\n\
-     text segment ending precisely at the end of a page; it causes the\n\
-     data segment to skip a page.  The above expression does not have\n\
-     this problem, but it will currently (2/95) cause BFD to allocate\n\
-     a single segment, combining both text and data, for this case.\n\
-     This will prevent the text segment from being shared among\n\
-     multiple executions of the program; I think that is more\n\
-     important than losing a page of the virtual address space (note\n\
-     that no actual memory is lost; the page which is skipped can not\n\
-     be referenced).  */\n\
-  . += 0x10000;\n\
-  .data    :\n\
-  {\n\
-    *(.data)\n\
-    CONSTRUCTORS\n\
-  }\n\
-  .data1   : { *(.data1) }\n\
-  .ctors         : { *(.ctors)   }\n\
-  .dtors         : { *(.dtors)   }\n\
-  _gp = ALIGN(16) + 0x7ff0;\n\
-  .got           :\n\
-  {\n\
-    *(.got.plt) *(.got)\n\
-   }\n\
-  /* We want the small data sections together, so single-instruction offsets\n\
-     can access them all, and initialized data all before uninitialized, so\n\
-     we can shorten the on-disk segment size.  */\n\
-  .sdata     : { *(.sdata) }\n\
-  .lit8 : { *(.lit8) }\n\
-  .lit4 : { *(.lit4) }\n\
-  .sbss      : { *(.sbss) *(.scommon) }\n\
-  .bss       :\n\
-  {\n\
-   *(.dynbss)\n\
-   *(.bss)\n\
-   *(COMMON)\n\
-  }\n\
-  /* These are needed for ELF backends which have not yet been\n\
-     converted to the new style linker.  */\n\
-  .stab 0 : { *(.stab) }\n\
-  .stabstr 0 : { *(.stabstr) }\n\
-  /* DWARF debug sections.\n\
-     Symbols in the .debug DWARF section are relative to the beginning of the\n\
-     section so we begin .debug at 0.  It's not clear yet what needs to happen\n\
-     for the others.   */\n\
-  .debug          0 : { *(.debug) }\n\
-  .debug_srcinfo  0 : { *(.debug_srcinfo) }\n\
-  .debug_aranges  0 : { *(.debug_aranges) }\n\
-  .debug_pubnames 0 : { *(.debug_pubnames) }\n\
-  .debug_sfnames  0 : { *(.debug_sfnames) }\n\
-  .line           0 : { *(.line) }\n\
-  /* These must appear regardless of  .  */\n\
-  .gptab.sdata : { *(.gptab.data) *(.gptab.sdata) }\n\
-  .gptab.sbss : { *(.gptab.bss) *(.gptab.sbss) }\n\
-}\n\n";
-  else
-    return "OUTPUT_FORMAT(\"elf32-bigmips\", \"elf32-bigmips\",\n\
-	      \"elf32-littlemips\")\n\
-OUTPUT_ARCH(mips)\n\
-ENTRY(_start)\n\
- SEARCH_DIR(/usr/local/mips-elf/lib);\n\
-/* Do we need any of these for elf?\n\
-   __DYNAMIC = 0;    */\n\
-SECTIONS\n\
-{\n\
-  /* Read-only sections, merged into text segment: */\n\
-  . = 0x0400000;\n\
-  .interp     : { *(.interp) 	}\n\
-  .reginfo       : { *(.reginfo) }\n\
-  .dynamic       : { *(.dynamic) }\n\
-  .dynstr        : { *(.dynstr)		}\n\
-  .dynsym        : { *(.dynsym)		}\n\
-  .hash          : { *(.hash)		}\n\
-  .rel.text      : { *(.rel.text)		}\n\
-  .rela.text     : { *(.rela.text) 	}\n\
-  .rel.data      : { *(.rel.data)		}\n\
-  .rela.data     : { *(.rela.data) 	}\n\
-  .rel.rodata    : { *(.rel.rodata) 	}\n\
-  .rela.rodata   : { *(.rela.rodata) 	}\n\
-  .rel.got       : { *(.rel.got)		}\n\
-  .rela.got      : { *(.rela.got)		}\n\
-  .rel.ctors     : { *(.rel.ctors)	}\n\
-  .rela.ctors    : { *(.rela.ctors)	}\n\
-  .rel.dtors     : { *(.rel.dtors)	}\n\
-  .rela.dtors    : { *(.rela.dtors)	}\n\
-  .rel.init      : { *(.rel.init)	}\n\
-  .rela.init     : { *(.rela.init)	}\n\
-  .rel.fini      : { *(.rel.fini)	}\n\
-  .rela.fini     : { *(.rela.fini)	}\n\
-  .rel.bss       : { *(.rel.bss)		}\n\
-  .rela.bss      : { *(.rela.bss)		}\n\
-  .rel.plt       : { *(.rel.plt)		}\n\
-  .rela.plt      : { *(.rela.plt)		}\n\
-  .rodata    : { *(.rodata)  }\n\
-  .rodata1   : { *(.rodata1) }\n\
-  .init          : { *(.init)	} =0\n\
-  .text      :\n\
-  {\n\
-    _ftext = . ;\n\
-    *(.text)\n\
-    *(.stub)\n\
-    /* .gnu.warning sections are handled specially by elf32.em.  */\n\
-    *(.gnu.warning)\n\
-  } =0\n\
-  _etext = .;\n\
-  PROVIDE (etext = .);\n\
-  .fini      : { *(.fini)    } =0\n\
-  /* Adjust the address for the data segment.  We want to adjust up to\n\
-     the same address within the page on the next page up.  It would\n\
-     be more correct to do this:\n\
-       . = 0x10000000;\n\
-     The current expression does not correctly handle the case of a\n\
-     text segment ending precisely at the end of a page; it causes the\n\
-     data segment to skip a page.  The above expression does not have\n\
-     this problem, but it will currently (2/95) cause BFD to allocate\n\
-     a single segment, combining both text and data, for this case.\n\
-     This will prevent the text segment from being shared among\n\
-     multiple executions of the program; I think that is more\n\
-     important than losing a page of the virtual address space (note\n\
-     that no actual memory is lost; the page which is skipped can not\n\
-     be referenced).  */\n\
-  . += 0x10000000 - 0x0400000;\n\
-  .data    :\n\
-  {\n\
-    _fdata = . ;\n\
-    *(.data)\n\
-    CONSTRUCTORS\n\
-  }\n\
-  .data1   : { *(.data1) }\n\
-  .ctors         : { *(.ctors)   }\n\
-  .dtors         : { *(.dtors)   }\n\
-  _gp = ALIGN(16) + 0x7ff0;\n\
-  .got           :\n\
-  {\n\
-    *(.got.plt) *(.got)\n\
-   }\n\
-  /* We want the small data sections together, so single-instruction offsets\n\
-     can access them all, and initialized data all before uninitialized, so\n\
-     we can shorten the on-disk segment size.  */\n\
-  .sdata     : { *(.sdata) }\n\
-  .lit8 : { *(.lit8) }\n\
-  .lit4 : { *(.lit4) }\n\
-  _edata  =  .;\n\
-  PROVIDE (edata = .);\n\
-  __bss_start = .;\n\
-  _fbss = .;\n\
-  .sbss      : { *(.sbss) *(.scommon) }\n\
-  .bss       :\n\
-  {\n\
-   *(.dynbss)\n\
-   *(.bss)\n\
-   *(COMMON)\n\
-  }\n\
-  _end = . ;\n\
-  PROVIDE (end = .);\n\
-  /* These are needed for ELF backends which have not yet been\n\
-     converted to the new style linker.  */\n\
-  .stab 0 : { *(.stab) }\n\
-  .stabstr 0 : { *(.stabstr) }\n\
-  /* DWARF debug sections.\n\
-     Symbols in the .debug DWARF section are relative to the beginning of the\n\
-     section so we begin .debug at 0.  It's not clear yet what needs to happen\n\
-     for the others.   */\n\
-  .debug          0 : { *(.debug) }\n\
-  .debug_srcinfo  0 : { *(.debug_srcinfo) }\n\
-  .debug_aranges  0 : { *(.debug_aranges) }\n\
-  .debug_pubnames 0 : { *(.debug_pubnames) }\n\
-  .debug_sfnames  0 : { *(.debug_sfnames) }\n\
-  .line           0 : { *(.line) }\n\
-  /* These must appear regardless of  .  */\n\
-  .gptab.sdata : { *(.gptab.data) *(.gptab.sdata) }\n\
-  .gptab.sbss : { *(.gptab.bss) *(.gptab.sbss) }\n\
-}\n\n";
-}
-
-struct ld_emulation_xfer_struct ld_elf32ebmip_emulation = 
-{
-  gldelf32ebmip_before_parse,
-  syslib_default,
-  hll_default,
-  after_parse_default,
-  gldelf32ebmip_after_open,
-  after_allocation_default,
-  set_output_arch_default,
-  ldemul_default_target,
-  gldelf32ebmip_before_allocation,
-  gldelf32ebmip_get_script,
-  "elf32ebmip",
-  "elf32-bigmips",
-  NULL,
-  NULL,
-  gldelf32ebmip_open_dynamic_archive,
-  gldelf32ebmip_place_orphan
-};
diff --git a/ld/mpw-eppcmac.c b/ld/mpw-eppcmac.c
deleted file mode 100644
index 1278097..0000000
--- a/ld/mpw-eppcmac.c
+++ /dev/null
@@ -1,1224 +0,0 @@
-/* This file is is generated by a shell script.  DO NOT EDIT! */
-
-/* AIX emulation code for ppcmacos
-   Copyright 1991, 1993, 1995, 1996, 1997, 2000, 2001
-   Free Software Foundation, Inc.
-   Written by Steve Chamberlain <sac@cygnus.com>
-   AIX support by Ian Lance Taylor <ian@cygnus.com>
-
-This file is part of GLD, the Gnu Linker.
-
-This program is free software; you can redistribute it and/or modify
-it under the terms of the GNU General Public License as published by
-the Free Software Foundation; either version 2 of the License, or
-(at your option) any later version.
-
-This program is distributed in the hope that it will be useful,
-but WITHOUT ANY WARRANTY; without even the implied warranty of
-MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-GNU General Public License for more details.
-
-You should have received a copy of the GNU General Public License
-along with this program; if not, write to the Free Software
-Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  */
-
-#define TARGET_IS_ppcmacos
-
-#include "bfd.h"
-#include "sysdep.h"
-#include "libiberty.h"
-#include "safe-ctype.h"
-#include "getopt.h"
-#include "bfdlink.h"
-
-#include "ld.h"
-#include "ldmain.h"
-#include "ldmisc.h"
-#include "ldexp.h"
-#include "ldlang.h"
-#include "ldctor.h"
-#include "ldgram.h"
-#include "ldfile.h"
-#include "ldemul.h"
-
-static void gldppcmacos_before_parse PARAMS ((void));
-static int gldppcmacos_parse_args PARAMS ((int, char **));
-static void gldppcmacos_after_open PARAMS ((void));
-static void gldppcmacos_before_allocation PARAMS ((void));
-static void gldppcmacos_read_file PARAMS ((const char *, boolean));
-static void gldppcmacos_free PARAMS ((PTR));
-static void gldppcmacos_find_relocs
-  PARAMS ((lang_statement_union_type *));
-static void gldppcmacos_find_exp_assignment PARAMS ((etree_type *));
-static char *gldppcmacos_get_script PARAMS ((int *isfile));
-
-/* The file alignment required for each section.  */
-static unsigned long file_align;
-
-/* The maximum size the stack is permitted to grow.  This is stored in
-   the a.out header.  */
-static unsigned long maxstack;
-
-/* The maximum data size.  This is stored in the a.out header.  */
-static unsigned long maxdata;
-
-/* Whether to perform garbage collection.  */
-static int gc = 1;
-
-/* The module type to use.  */
-static unsigned short modtype = ('1' << 8) | 'L';
-
-/* Whether the .text section must be read-only (i.e., no relocs
-   permitted).  */
-static int textro;
-
-/* Whether to implement Unix like linker semantics.  */
-static int unix_ld;
-
-/* Structure used to hold import file list.  */
-
-struct filelist
-{
-  struct filelist *next;
-  const char *name;
-};
-
-/* List of import files.  */
-static struct filelist *import_files;
-
-/* List of export symbols read from the export files.  */
-
-struct export_symbol_list
-{
-  struct export_symbol_list *next;
-  const char *name;
-  boolean syscall;
-};
-
-static struct export_symbol_list *export_symbols;
-
-/* This routine is called before anything else is done.  */
-
-static void
-gldppcmacos_before_parse()
-{
-#ifndef TARGET_			/* I.e., if not generic.  */
-  ldfile_output_architecture = bfd_arch_powerpc;
-#endif /* not TARGET_ */
-}
-
-/* Handle AIX specific options.  */
-
-static int
-gldppcmacos_parse_args (argc, argv)
-     int argc;
-     char **argv;
-{
-  int prevoptind = optind;
-  int prevopterr = opterr;
-  int indx;
-  int longind;
-  int optc;
-  long val;
-  char *end;
-
-#define OPTION_IGNORE (300)
-#define OPTION_AUTOIMP (OPTION_IGNORE + 1)
-#define OPTION_ERNOTOK (OPTION_AUTOIMP + 1)
-#define OPTION_EROK (OPTION_ERNOTOK + 1)
-#define OPTION_EXPORT (OPTION_EROK + 1)
-#define OPTION_IMPORT (OPTION_EXPORT + 1)
-#define OPTION_LOADMAP (OPTION_IMPORT + 1)
-#define OPTION_MAXDATA (OPTION_LOADMAP + 1)
-#define OPTION_MAXSTACK (OPTION_MAXDATA + 1)
-#define OPTION_MODTYPE (OPTION_MAXSTACK + 1)
-#define OPTION_NOAUTOIMP (OPTION_MODTYPE + 1)
-#define OPTION_NOSTRCMPCT (OPTION_NOAUTOIMP + 1)
-#define OPTION_PD (OPTION_NOSTRCMPCT + 1)
-#define OPTION_PT (OPTION_PD + 1)
-#define OPTION_STRCMPCT (OPTION_PT + 1)
-#define OPTION_UNIX (OPTION_STRCMPCT + 1)
-
-  static struct option longopts[] = {
-    {"basis", no_argument, NULL, OPTION_IGNORE},
-    {"bautoimp", no_argument, NULL, OPTION_AUTOIMP},
-    {"bcomprld", no_argument, NULL, OPTION_IGNORE},
-    {"bcrld", no_argument, NULL, OPTION_IGNORE},
-    {"bcror31", no_argument, NULL, OPTION_IGNORE},
-    {"bD", required_argument, NULL, OPTION_MAXDATA},
-    {"bE", required_argument, NULL, OPTION_EXPORT},
-    {"bernotok", no_argument, NULL, OPTION_ERNOTOK},
-    {"berok", no_argument, NULL, OPTION_EROK},
-    {"berrmsg", no_argument, NULL, OPTION_IGNORE},
-    {"bexport", required_argument, NULL, OPTION_EXPORT},
-    {"bf", no_argument, NULL, OPTION_ERNOTOK},
-    {"bgc", no_argument, &gc, 1},
-    {"bh", required_argument, NULL, OPTION_IGNORE},
-    {"bhalt", required_argument, NULL, OPTION_IGNORE},
-    {"bI", required_argument, NULL, OPTION_IMPORT},
-    {"bimport", required_argument, NULL, OPTION_IMPORT},
-    {"bl", required_argument, NULL, OPTION_LOADMAP},
-    {"bloadmap", required_argument, NULL, OPTION_LOADMAP},
-    {"bmaxdata", required_argument, NULL, OPTION_MAXDATA},
-    {"bmaxstack", required_argument, NULL, OPTION_MAXSTACK},
-    {"bM", required_argument, NULL, OPTION_MODTYPE},
-    {"bmodtype", required_argument, NULL, OPTION_MODTYPE},
-    {"bnoautoimp", no_argument, NULL, OPTION_NOAUTOIMP},
-    {"bnodelcsect", no_argument, NULL, OPTION_IGNORE},
-    {"bnoentry", no_argument, NULL, OPTION_IGNORE},
-    {"bnogc", no_argument, &gc, 0},
-    {"bnso", no_argument, NULL, OPTION_NOAUTOIMP},
-    {"bnostrcmpct", no_argument, NULL, OPTION_NOSTRCMPCT},
-    {"bnotextro", no_argument, &textro, 0},
-    {"bnro", no_argument, &textro, 0},
-    {"bpD", required_argument, NULL, OPTION_PD},
-    {"bpT", required_argument, NULL, OPTION_PT},
-    {"bro", no_argument, &textro, 1},
-    {"bS", required_argument, NULL, OPTION_MAXSTACK},
-    {"bso", no_argument, NULL, OPTION_AUTOIMP},
-    {"bstrcmpct", no_argument, NULL, OPTION_STRCMPCT},
-    {"btextro", no_argument, &textro, 1},
-    {"static", no_argument, NULL, OPTION_NOAUTOIMP},
-    {"unix", no_argument, NULL, OPTION_UNIX},
-    {NULL, no_argument, NULL, 0}
-  };
-
-  /* Options supported by the AIX linker which we do not support: -f,
-     -S, -v, -Z, -bbindcmds, -bbinder, -bbindopts, -bcalls, -bcaps,
-     -bcror15, -bdebugopt, -bdbg, -bdelcsect, -bex?, -bfilelist, -bfl,
-     -bgcbypass, -bglink, -binsert, -bi, -bloadmap, -bl, -bmap, -bnl,
-     -bnobind, -bnocomprld, -bnocrld, -bnoerrmsg, -bnoglink,
-     -bnoloadmap, -bnl, -bnoobjreorder, -bnoquiet, -bnoreorder,
-     -bnotypchk, -bnox, -bquiet, -bR, -brename, -breorder, -btypchk,
-     -bx, -bX, -bxref.  */
-
-  /* If the current option starts with -b, change the first : to an =.
-     The AIX linker uses : to separate the option from the argument;
-     changing it to = lets us treat it as a getopt option.  */
-  indx = optind;
-  if (indx == 0)
-    indx = 1;
-  if (indx < argc && strncmp (argv[indx], "-b", 2) == 0)
-    {
-      char *s;
-
-      for (s = argv[indx]; *s != '\0'; s++)
-	{
-	  if (*s == ':')
-	    {
-	      *s = '=';
-	      break;
-	    }
-	}
-    }
-
-  opterr = 0;
-  optc = getopt_long_only (argc, argv, "-D:H:KT:z", longopts, &longind);
-  opterr = prevopterr;
-
-  switch (optc)
-    {
-    default:
-      optind = prevoptind;
-      return 0;
-
-    case 0:
-      /* Long option which just sets a flag.  */
-      break;
-
-    case 'D':
-      val = strtol (optarg, &end, 0);
-      if (*end != '\0')
-	einfo (_("%P: warning: ignoring invalid -D number %s\n"), optarg);
-      else if (val != -1)
-	lang_section_start (".data", exp_intop (val));
-      break;
-
-    case 'H':
-      val = strtoul (optarg, &end, 0);
-      if (*end != '\0'
-	  || (val & (val - 1)) != 0)
-	einfo (_("%P: warning: ignoring invalid -H number %s\n"), optarg);
-      else
-	file_align = val;
-      break;
-
-    case 'K':
-    case 'z':
-      /* FIXME: This should use the page size for the target system.  */
-      file_align = 4096;
-      break;
-
-    case 'T':
-      /* On AIX this is the same as GNU ld -Ttext.  When we see -T
-         number, we assume the AIX option is intended.  Otherwise, we
-         assume the usual GNU ld -T option is intended.  We can't just
-         ignore the AIX option, because gcc passes it to the linker.  */
-      val = strtoul (optarg, &end, 0);
-      if (*end != '\0')
-	{
-	  optind = prevoptind;
-	  return 0;
-	}
-      lang_section_start (".text", exp_intop (val));
-      break;
-
-    case OPTION_IGNORE:
-      break;
-
-    case OPTION_AUTOIMP:
-      link_info.static_link = false;
-      break;
-
-    case OPTION_ERNOTOK:
-      force_make_executable = false;
-      break;
-
-    case OPTION_EROK:
-      force_make_executable = true;
-      break;
-
-    case OPTION_EXPORT:
-      gldppcmacos_read_file (optarg, false);
-      break;
-
-    case OPTION_IMPORT:
-      {
-	struct filelist *n;
-	struct filelist **flpp;
-
-	n = (struct filelist *) xmalloc (sizeof (struct filelist));
-	n->next = NULL;
-	n->name = optarg;
-	flpp = &import_files;
-	while (*flpp != NULL)
-	  flpp = &(*flpp)->next;
-	*flpp = n;
-      }
-      break;
-
-    case OPTION_LOADMAP:
-      config.map_filename = optarg;
-      break;
-
-    case OPTION_MAXDATA:
-      val = strtoul (optarg, &end, 0);
-      if (*end != '\0')
-	einfo (_("%P: warning: ignoring invalid -bmaxdata number %s\n"),
-	       optarg);
-      else
-	maxdata = val;
-      break;
-
-    case OPTION_MAXSTACK:
-      val = strtoul (optarg, &end, 0);
-      if (*end != '\0')
-	einfo (_("%P: warning: ignoring invalid -bmaxstack number %s\n"),
-	       optarg);
-      else
-	maxstack = val;
-      break;
-
-    case OPTION_MODTYPE:
-      if (*optarg == 'S')
-	{
-	  link_info.shared = true;
-	  ++optarg;
-	}
-      if (*optarg == '\0' || optarg[1] == '\0')
-	einfo (_("%P: warning: ignoring invalid module type %s\n"), optarg);
-      else
-	modtype = (*optarg << 8) | optarg[1];
-      break;
-
-    case OPTION_NOAUTOIMP:
-      link_info.static_link = true;
-      break;
-
-    case OPTION_NOSTRCMPCT:
-      link_info.traditional_format = true;
-      break;
-
-    case OPTION_PD:
-      /* This sets the page that the .data section is supposed to
-         start on.  The offset within the page should still be the
-         offset within the file, so we need to build an appropriate
-         expression.  */
-      val = strtoul (optarg, &end, 0);
-      if (*end != '\0')
-	einfo (_("%P: warning: ignoring invalid -pD number %s\n"), optarg);
-      else
-	{
-	  etree_type *t;
-
-	  t = exp_binop ('+',
-			 exp_intop (val),
-			 exp_binop ('&',
-				    exp_nameop (NAME, "."),
-				    exp_intop (0xfff)));
-	  t = exp_binop ('&',
-			 exp_binop ('+', t, exp_intop (7)),
-			 exp_intop (~ (bfd_vma) 7));
-	  lang_section_start (".data", t);
-	}
-      break;
-
-    case OPTION_PT:
-      /* This set the page that the .text section is supposed to start
-         on.  The offset within the page should still be the offset
-         within the file.  */
-      val = strtoul (optarg, &end, 0);
-      if (*end != '\0')
-	einfo (_("%P: warning: ignoring invalid -pT number %s\n"), optarg);
-      else
-	{
-	  etree_type *t;
-
-	  t = exp_binop ('+',
-			 exp_intop (val),
-			 exp_nameop (SIZEOF_HEADERS, NULL));
-	  t = exp_binop ('&',
-			 exp_binop ('+', t, exp_intop (7)),
-			 exp_intop (~ (bfd_vma) 7));
-	  lang_section_start (".text", t);
-	}
-      break;
-
-    case OPTION_STRCMPCT:
-      link_info.traditional_format = false;
-      break;
-
-    case OPTION_UNIX:
-      unix_ld = true;
-      break;
-    }
-
-  return 1;
-}
-
-/* This is called when an input file can not be recognized as a BFD
-   object or an archive.  If the file starts with #!, we must treat it
-   as an import file.  This is for AIX compatibility.  */
-
-static boolean
-gldppcmacos_unrecognized_file (entry)
-     lang_input_statement_type *entry;
-{
-  FILE *e;
-  boolean ret;
-
-  e = fopen (entry->filename, FOPEN_RT);
-  if (e == NULL)
-    return false;
-
-  ret = false;
-
-  if (getc (e) == '#' && getc (e) == '!')
-    {
-      struct filelist *n;
-      struct filelist **flpp;
-
-      n = (struct filelist *) xmalloc (sizeof (struct filelist));
-      n->next = NULL;
-      n->name = entry->filename;
-      flpp = &import_files;
-      while (*flpp != NULL)
-	flpp = &(*flpp)->next;
-      *flpp = n;
-
-      ret = true;
-      entry->loaded = true;
-    }
-
-  fclose (e);
-
-  return ret;
-}
-
-/* This is called after the input files have been opened.  */
-
-static void
-gldppcmacos_after_open ()
-{
-  boolean r;
-  struct set_info *p;
-
-  /* Call ldctor_build_sets, after pretending that this is a
-     relocateable link.  We do this because AIX requires relocation
-     entries for all references to symbols, even in a final
-     executable.  Of course, we only want to do this if we are
-     producing an XCOFF output file.  */
-  r = link_info.relocateable;
-  if (strstr (bfd_get_target (output_bfd), "xcoff") != NULL)
-    link_info.relocateable = true;
-  ldctor_build_sets ();
-  link_info.relocateable = r;
-
-  /* For each set, record the size, so that the XCOFF backend can
-     output the correct csect length.  */
-  for (p = sets; p != (struct set_info *) NULL; p = p->next)
-    {
-      bfd_size_type size;
-
-      /* If the symbol is defined, we may have been invoked from
-	 collect, and the sets may already have been built, so we do
-	 not do anything.  */
-      if (p->h->type == bfd_link_hash_defined
-	  || p->h->type == bfd_link_hash_defweak)
-	continue;
-
-      if (p->reloc != BFD_RELOC_CTOR)
-	{
-	  /* Handle this if we need to.  */
-	  abort ();
-	}
-
-      size = (p->count + 2) * 4;
-      if (! bfd_xcoff_link_record_set (output_bfd, &link_info, p->h, size))
-	einfo (_("%F%P: bfd_xcoff_link_record_set failed: %E\n"));
-    }
-}
-
-/* This is called after the sections have been attached to output
-   sections, but before any sizes or addresses have been set.  */
-
-static void
-gldppcmacos_before_allocation ()
-{
-  struct filelist *fl;
-  struct export_symbol_list *el;
-  char *libpath;
-  asection *special_sections[6];
-  int i;
-
-  /* Handle the import and export files, if any.  */
-  for (fl = import_files; fl != NULL; fl = fl->next)
-    gldppcmacos_read_file (fl->name, true);
-  for (el = export_symbols; el != NULL; el = el->next)
-    {
-      struct bfd_link_hash_entry *h;
-
-      h = bfd_link_hash_lookup (link_info.hash, el->name, false, false, false);
-      if (h == NULL)
-	einfo (_("%P%F: bfd_link_hash_lookup of export symbol failed: %E\n"));
-      if (! bfd_xcoff_export_symbol (output_bfd, &link_info, h, el->syscall))
-	einfo (_("%P%F: bfd_xcoff_export_symbol failed: %E\n"));
-    }
-
-  /* Track down all relocations called for by the linker script (these
-     are typically constructor/destructor entries created by
-     CONSTRUCTORS) and let the backend know it will need to create
-     .loader relocs for them.  */
-  lang_for_each_statement (gldppcmacos_find_relocs);
-
-  /* We need to build LIBPATH from the -L arguments.  If any -rpath
-     arguments were used, though, we use -rpath instead, as a GNU
-     extension.  */
-  if (command_line.rpath != NULL)
-    libpath = command_line.rpath;
-  else if (search_head == NULL)
-    libpath = (char *) "";
-  else
-    {
-      size_t len;
-      search_dirs_type *search;
-
-      len = strlen (search_head->name);
-      libpath = xmalloc (len + 1);
-      strcpy (libpath, search_head->name);
-      for (search = search_head->next; search != NULL; search = search->next)
-	{
-	  size_t nlen;
-
-	  nlen = strlen (search->name);
-	  libpath = xrealloc (libpath, len + nlen + 2);
-	  libpath[len] = ':';
-	  strcpy (libpath + len + 1, search->name);
-	  len += nlen + 1;
-	}
-    }
-
-  /* Let the XCOFF backend set up the .loader section.  */
-  if (! bfd_xcoff_size_dynamic_sections (output_bfd, &link_info, libpath,
-					 entry_symbol, file_align,
-					 maxstack, maxdata,
-					 gc && ! unix_ld ? true : false,
-					 modtype,
-					 textro ? true : false,
-					 unix_ld,
-					 special_sections))
-    einfo (_("%P%F: failed to set dynamic section sizes: %E\n"));
-
-  /* Look through the special sections, and put them in the right
-     place in the link ordering.  This is especially magic.  */
-  for (i = 0; i < 6; i++)
-    {
-      asection *sec;
-      lang_output_section_statement_type *os;
-      lang_statement_union_type **pls;
-      lang_input_section_type *is;
-      const char *oname;
-      boolean start;
-
-      sec = special_sections[i];
-      if (sec == NULL)
-	continue;
-
-      /* Remove this section from the list of the output section.
-         This assumes we know what the script looks like.  */
-      is = NULL;
-      os = lang_output_section_find (sec->output_section->name);
-      if (os == NULL)
-	einfo (_("%P%F: can't find output section %s\n"),
-	       sec->output_section->name);
-      for (pls = &os->children.head; *pls != NULL; pls = &(*pls)->header.next)
-	{
-	  if ((*pls)->header.type == lang_input_section_enum
-	      && (*pls)->input_section.section == sec)
-	    {
-	      is = (lang_input_section_type *) *pls;
-	      *pls = (*pls)->header.next;
-	      break;
-	    }
-	  if ((*pls)->header.type == lang_wild_statement_enum)
-	    {
-	      lang_statement_union_type **pwls;
-
-	      for (pwls = &(*pls)->wild_statement.children.head;
-		   *pwls != NULL;
-		   pwls = &(*pwls)->header.next)
-		{
-		  if ((*pwls)->header.type == lang_input_section_enum
-		      && (*pwls)->input_section.section == sec)
-		    {
-		      is = (lang_input_section_type *) *pwls;
-		      *pwls = (*pwls)->header.next;
-		      break;
-		    }
-		}
-	      if (is != NULL)
-		break;
-	    }
-	}	
-
-      if (is == NULL)
-	einfo (_("%P%F: can't find %s in output section\n"),
-	       bfd_get_section_name (sec->owner, sec));
-
-      /* Now figure out where the section should go.  */
-      switch (i)
-	{
-	default: /* to avoid warnings */
-	case 0:
-	  /* _text */
-	  oname = ".text";
-	  start = true;
-	  break;
-	case 1:
-	  /* _etext */
-	  oname = ".text";
-	  start = false;
-	  break;
-	case 2:
-	  /* _data */
-	  oname = ".data";
-	  start = true;
-	  break;
-	case 3:
-	  /* _edata */
-	  oname = ".data";
-	  start = false;
-	  break;
-	case 4:
-	case 5:
-	  /* _end and end */
-	  oname = ".bss";
-	  start = false;
-	  break;
-	}
-
-      os = lang_output_section_find (oname);
-
-      if (start)
-	{
-	  is->header.next = os->children.head;
-	  os->children.head = (lang_statement_union_type *) is;
-	}
-      else
-	{
-	  is->header.next = NULL;
-	  lang_statement_append (&os->children,
-				 (lang_statement_union_type *) is,
-				 &is->header.next);
-	}
-    }
-}
-
-/* Read an import or export file.  For an import file, this is called
-   by the before_allocation emulation routine.  For an export file,
-   this is called by the parse_args emulation routine.  */
-
-static void
-gldppcmacos_read_file (filename, import)
-     const char *filename;
-     boolean import;
-{
-  struct obstack *o;
-  FILE *f;
-  int lineno;
-  int c;
-  boolean keep;
-  const char *imppath;
-  const char *impfile;
-  const char *impmember;
-
-  o = (struct obstack *) xmalloc (sizeof (struct obstack));
-  obstack_specify_allocation (o, 0, 0, xmalloc, gldppcmacos_free);
-
-  f = fopen (filename, FOPEN_RT);
-  if (f == NULL)
-    {
-      bfd_set_error (bfd_error_system_call);
-      einfo ("%F%s: %E\n", filename);
-    }
-
-  keep = false;
-
-  imppath = NULL;
-  impfile = NULL;
-  impmember = NULL;
-
-  lineno = 0;
-  while ((c = getc (f)) != EOF)
-    {
-      char *s;
-      char *symname;
-      boolean syscall;
-      bfd_vma address;
-      struct bfd_link_hash_entry *h;
-
-      if (c != '\n')
-	{
-	  obstack_1grow (o, c);
-	  continue;
-	}
-
-      obstack_1grow (o, '\0');
-      ++lineno;
-
-      s = (char *) obstack_base (o);
-      while (ISSPACE (*s))
-	++s;
-      if (*s == '\0'
-	  || *s == '*'
-	  || (*s == '#' && s[1] == ' ')
-	  || (! import && *s == '#' && s[1] == '!'))
-	{
-	  obstack_free (o, obstack_base (o));
-	  continue;
-	}
-
-      if (*s == '#' && s[1] == '!')
-	{
-	  s += 2;
-	  while (ISSPACE (*s))
-	    ++s;
-	  if (*s == '\0')
-	    {
-	      imppath = NULL;
-	      impfile = NULL;
-	      impmember = NULL;
-	      obstack_free (o, obstack_base (o));
-	    }
-	  else if (*s == '(')
-	    einfo (_("%F%s%d: #! ([member]) is not supported in import files\n"),
-		   filename, lineno);
-	  else
-	    {
-	      char cs;
-	      char *file;
-
-	      (void) obstack_finish (o);
-	      keep = true;
-	      imppath = s;
-	      file = NULL;
-	      while (! ISSPACE (*s) && *s != '(' && *s != '\0')
-		{
-		  if (*s == '/')
-		    file = s + 1;
-		  ++s;
-		}
-	      if (file != NULL)
-		{
-		  file[-1] = '\0';
-		  impfile = file;
-		  if (imppath == file - 1)
-		    imppath = "/";
-		}
-	      else
-		{
-		  impfile = imppath;
-		  imppath = "";
-		}
-	      cs = *s;
-	      *s = '\0';
-	      while (ISSPACE (cs))
-		{
-		  ++s;
-		  cs = *s;
-		}
-	      if (cs != '(')
-		{
-		  impmember = "";
-		  if (cs != '\0')
-		    einfo (_("%s:%d: warning: syntax error in import file\n"),
-			   filename, lineno);
-		}
-	      else
-		{
-		  ++s;
-		  impmember = s;
-		  while (*s != ')' && *s != '\0')
-		    ++s;
-		  if (*s == ')')
-		    *s = '\0';
-		  else
-		    einfo (_("%s:%d: warning: syntax error in import file\n"),
-			   filename, lineno);
-		}
-	    }
-
-	  continue;
-	}
-
-      /* This is a symbol to be imported or exported.  */
-      symname = s;
-      syscall = false;
-      address = (bfd_vma) -1;
-
-      while (! ISSPACE (*s) && *s != '\0')
-	++s;
-      if (*s != '\0')
-	{
-	  char *se;
-
-	  *s++ = '\0';
-
-	  while (ISSPACE (*s))
-	    ++s;
-
-	  se = s;
-	  while (! ISSPACE (*se) && *se != '\0')
-	    ++se;
-	  if (*se != '\0')
-	    {
-	      *se++ = '\0';
-	      while (ISSPACE (*se))
-		++se;
-	      if (*se != '\0')
-		einfo (_("%s%d: warning: syntax error in import/export file\n"),
-		       filename, lineno);
-	    }
-
-	  if (strcasecmp (s, "svc") == 0
-	      || strcasecmp (s, "syscall") == 0)
-	    syscall = true;
-	  else
-	    {
-	      char *end;
-
-	      address = strtoul (s, &end, 0);
-	      if (*end != '\0')
-		einfo (_("%s:%d: warning: syntax error in import/export file\n"),
-		       filename, lineno);
-	    }
-	}
-
-      if (! import)
-	{
-	  struct export_symbol_list *n;
-
-	  ldlang_add_undef (symname);
-	  n = ((struct export_symbol_list *)
-	       xmalloc (sizeof (struct export_symbol_list)));
-	  n->next = export_symbols;
-	  n->name = xstrdup (symname);
-	  n->syscall = syscall;
-	  export_symbols = n;
-	}
-      else
-	{
-	  h = bfd_link_hash_lookup (link_info.hash, symname, false, false,
-				    true);
-	  if (h == NULL || h->type == bfd_link_hash_new)
-	    {
-	      /* We can just ignore attempts to import an unreferenced
-		 symbol.  */
-	    }
-	  else
-	    {
-	      if (! bfd_xcoff_import_symbol (output_bfd, &link_info, h,
-					     address, imppath, impfile,
-					     impmember))
-		einfo (_("%X%s:%d: failed to import symbol %s: %E\n"),
-		       filename, lineno, symname);
-	    }
-	}
-
-      obstack_free (o, obstack_base (o));
-    }
-
-  if (obstack_object_size (o) > 0)
-    {
-      einfo (_("%s:%d: warning: ignoring unterminated last line\n"),
-	     filename, lineno);
-      obstack_free (o, obstack_base (o));
-    }
-
-  if (! keep)
-    {
-      obstack_free (o, NULL);
-      free (o);
-    }
-}
-
-/* This routine saves us from worrying about declaring free.  */
-
-static void
-gldppcmacos_free (p)
-     PTR p;
-{
-  free (p);
-}
-
-/* This is called by the before_allocation routine via
-   lang_for_each_statement.  It looks for relocations and assignments
-   to symbols.  */
-
-static void
-gldppcmacos_find_relocs (s)
-     lang_statement_union_type *s;
-{
-  if (s->header.type == lang_reloc_statement_enum)
-    {
-      lang_reloc_statement_type *rs;
-
-      rs = &s->reloc_statement;
-      if (rs->name == NULL)
-	einfo (_("%F%P: only relocations against symbols are permitted\n"));
-      if (! bfd_xcoff_link_count_reloc (output_bfd, &link_info, rs->name))
-	einfo (_("%F%P: bfd_xcoff_link_count_reloc failed: %E\n"));
-    }
-
-  if (s->header.type == lang_assignment_statement_enum)
-    gldppcmacos_find_exp_assignment (s->assignment_statement.exp);
-}
-
-/* Look through an expression for an assignment statement.  */
-
-static void
-gldppcmacos_find_exp_assignment (exp)
-     etree_type *exp;
-{
-  struct bfd_link_hash_entry *h;
-
-  switch (exp->type.node_class)
-    {
-    case etree_provide:
-      h = bfd_link_hash_lookup (link_info.hash, exp->assign.dst,
-				false, false, false);
-      if (h == NULL)
-	break;
-      /* Fall through.  */
-    case etree_assign:
-      if (strcmp (exp->assign.dst, ".") != 0)
-	{
-	  if (! bfd_xcoff_record_link_assignment (output_bfd, &link_info,
-						  exp->assign.dst))
-	    einfo (_("%P%F: failed to record assignment to %s: %E\n"),
-		   exp->assign.dst);
-	}
-      gldppcmacos_find_exp_assignment (exp->assign.src);
-      break;
-
-    case etree_binary:
-      gldppcmacos_find_exp_assignment (exp->binary.lhs);
-      gldppcmacos_find_exp_assignment (exp->binary.rhs);
-      break;
-
-    case etree_trinary:
-      gldppcmacos_find_exp_assignment (exp->trinary.cond);
-      gldppcmacos_find_exp_assignment (exp->trinary.lhs);
-      gldppcmacos_find_exp_assignment (exp->trinary.rhs);
-      break;
-
-    case etree_unary:
-      gldppcmacos_find_exp_assignment (exp->unary.child);
-      break;
-
-    default:
-      break;
-    }
-}
-
-static char *
-gldppcmacos_get_script(isfile)
-     int *isfile;
-{			     
-  *isfile = 0;
-
-  if (link_info.relocateable == true && config.build_constructors == true)
-    return
-"OUTPUT_FORMAT(\"xcoff-powermac\")\n\
-OUTPUT_ARCH(powerpc)\n\
-ENTRY(__start)\n\
-SECTIONS\n\
-{\n\
-  .pad 0 : { *(.pad) }\n\
-  .text 0 : {\n\
-    *(.text)\n\
-    *(.pr)\n\
-    *(.ro)\n\
-    *(.db)\n\
-    *(.gl)\n\
-    *(.xo)\n\
-    *(.ti)\n\
-    *(.tb)\n\
-  }\n\
-  .data 0 : {\n\
-    *(.data)\n\
-    *(.rw)\n\
-    *(.sv)\n\
-    *(.ua)\n\
-    . = ALIGN(4);\n\
-    CONSTRUCTORS\n\
-    *(.ds)\n\
-    *(.tc0)\n\
-    *(.tc)\n\
-    *(.td)\n\
-  }\n\
-  .bss : {\n\
-    *(.bss)\n\
-    *(.bs)\n\
-    *(.uc)\n\
-    *(COMMON)\n\
-  }\n\
-  .loader 0 : {\n\
-    *(.loader)\n\
-  }\n\
-  .debug 0 : {\n\
-    *(.debug)\n\
-  }\n\
-}\n\n"
-  ; else if (link_info.relocateable == true) return
-"OUTPUT_FORMAT(\"xcoff-powermac\")\n\
-OUTPUT_ARCH(powerpc)\n\
-ENTRY(__start)\n\
-SECTIONS\n\
-{\n\
-  .pad 0 : { *(.pad) }\n\
-  .text 0 : {\n\
-    *(.text)\n\
-    *(.pr)\n\
-    *(.ro)\n\
-    *(.db)\n\
-    *(.gl)\n\
-    *(.xo)\n\
-    *(.ti)\n\
-    *(.tb)\n\
-  }\n\
-  .data 0 : {\n\
-    *(.data)\n\
-    *(.rw)\n\
-    *(.sv)\n\
-    *(.ua)\n\
-    . = ALIGN(4);\n\
-    *(.ds)\n\
-    *(.tc0)\n\
-    *(.tc)\n\
-    *(.td)\n\
-  }\n\
-  .bss : {\n\
-    *(.bss)\n\
-    *(.bs)\n\
-    *(.uc)\n\
-    *(COMMON)\n\
-  }\n\
-  .loader 0 : {\n\
-    *(.loader)\n\
-  }\n\
-  .debug 0 : {\n\
-    *(.debug)\n\
-  }\n\
-}\n\n"
-  ; else if (!config.text_read_only) return
-"OUTPUT_FORMAT(\"xcoff-powermac\")\n\
-OUTPUT_ARCH(powerpc)\n\
- SEARCH_DIR(/usr/local/powerpc-apple-macos/lib);\n\
-ENTRY(__start)\n\
-SECTIONS\n\
-{\n\
-  .pad 0 : { *(.pad) }\n\
-  .text   : {\n\
-    PROVIDE (_text = .);\n\
-    *(.text)\n\
-    *(.pr)\n\
-    *(.ro)\n\
-    *(.db)\n\
-    *(.gl)\n\
-    *(.xo)\n\
-    *(.ti)\n\
-    *(.tb)\n\
-    PROVIDE (_etext = .);\n\
-  }\n\
-  .data 0 : {\n\
-    PROVIDE (_data = .);\n\
-    *(.data)\n\
-    *(.rw)\n\
-    *(.sv)\n\
-    *(.ua)\n\
-    . = ALIGN(4);\n\
-    CONSTRUCTORS\n\
-    *(.ds)\n\
-    *(.tc0)\n\
-    *(.tc)\n\
-    *(.td)\n\
-    PROVIDE (_edata = .);\n\
-  }\n\
-  .bss : {\n\
-    *(.bss)\n\
-    *(.bs)\n\
-    *(.uc)\n\
-    *(COMMON)\n\
-    PROVIDE (_end = .);\n\
-    PROVIDE (end = .);\n\
-  }\n\
-  .loader 0 : {\n\
-    *(.loader)\n\
-  }\n\
-  .debug 0 : {\n\
-    *(.debug)\n\
-  }\n\
-}\n\n"
-  ; else if (!config.magic_demand_paged) return
-"OUTPUT_FORMAT(\"xcoff-powermac\")\n\
-OUTPUT_ARCH(powerpc)\n\
- SEARCH_DIR(/usr/local/powerpc-apple-macos/lib);\n\
-ENTRY(__start)\n\
-SECTIONS\n\
-{\n\
-  .pad 0 : { *(.pad) }\n\
-  .text   : {\n\
-    PROVIDE (_text = .);\n\
-    *(.text)\n\
-    *(.pr)\n\
-    *(.ro)\n\
-    *(.db)\n\
-    *(.gl)\n\
-    *(.xo)\n\
-    *(.ti)\n\
-    *(.tb)\n\
-    PROVIDE (_etext = .);\n\
-  }\n\
-  .data 0 : {\n\
-    PROVIDE (_data = .);\n\
-    *(.data)\n\
-    *(.rw)\n\
-    *(.sv)\n\
-    *(.ua)\n\
-    . = ALIGN(4);\n\
-    CONSTRUCTORS\n\
-    *(.ds)\n\
-    *(.tc0)\n\
-    *(.tc)\n\
-    *(.td)\n\
-    PROVIDE (_edata = .);\n\
-  }\n\
-  .bss : {\n\
-    *(.bss)\n\
-    *(.bs)\n\
-    *(.uc)\n\
-    *(COMMON)\n\
-    PROVIDE (_end = .);\n\
-    PROVIDE (end = .);\n\
-  }\n\
-  .loader 0 : {\n\
-    *(.loader)\n\
-  }\n\
-  .debug 0 : {\n\
-    *(.debug)\n\
-  }\n\
-}\n\n"
-  ; else return
-"OUTPUT_FORMAT(\"xcoff-powermac\")\n\
-OUTPUT_ARCH(powerpc)\n\
- SEARCH_DIR(/usr/local/powerpc-apple-macos/lib);\n\
-ENTRY(__start)\n\
-SECTIONS\n\
-{\n\
-  .pad 0 : { *(.pad) }\n\
-  .text   : {\n\
-    PROVIDE (_text = .);\n\
-    *(.text)\n\
-    *(.pr)\n\
-    *(.ro)\n\
-    *(.db)\n\
-    *(.gl)\n\
-    *(.xo)\n\
-    *(.ti)\n\
-    *(.tb)\n\
-    PROVIDE (_etext = .);\n\
-  }\n\
-  .data 0 : {\n\
-    PROVIDE (_data = .);\n\
-    *(.data)\n\
-    *(.rw)\n\
-    *(.sv)\n\
-    *(.ua)\n\
-    . = ALIGN(4);\n\
-    CONSTRUCTORS\n\
-    *(.ds)\n\
-    *(.tc0)\n\
-    *(.tc)\n\
-    *(.td)\n\
-    PROVIDE (_edata = .);\n\
-  }\n\
-  .bss : {\n\
-    *(.bss)\n\
-    *(.bs)\n\
-    *(.uc)\n\
-    *(COMMON)\n\
-    PROVIDE (_end = .);\n\
-    PROVIDE (end = .);\n\
-  }\n\
-  .loader 0 : {\n\
-    *(.loader)\n\
-  }\n\
-  .debug 0 : {\n\
-    *(.debug)\n\
-  }\n\
-}\n\n"
-; }
-
-struct ld_emulation_xfer_struct ld_ppcmacos_emulation = 
-{
-  gldppcmacos_before_parse,
-  syslib_default,
-  hll_default,
-  after_parse_default,
-  gldppcmacos_after_open,
-  after_allocation_default,
-  set_output_arch_default,
-  ldemul_default_target,
-  gldppcmacos_before_allocation,
-  gldppcmacos_get_script,
-  "ppcmacos",
-  "xcoff-powermac",
-  0,	/* finish */
-  0,	/* create_output_section_statements */
-  0,	/* open_dynamic_archive */
-  0,	/* place_orphan */
-  0,	/* set_symbols */
-  gldppcmacos_parse_args,
-  gldppcmacos_unrecognized_file
-};
diff --git a/ld/mpw-esh.c b/ld/mpw-esh.c
deleted file mode 100644
index 2a0302c..0000000
--- a/ld/mpw-esh.c
+++ /dev/null
@@ -1,318 +0,0 @@
-/* This file is is generated by a shell script.  DO NOT EDIT! */
-
-/* emulate the original gld for the given sh
-   Copyright 1991, 1993, 1995, 2000 Free Software Foundation, Inc.
-   Written by Steve Chamberlain steve@cygnus.com
-
-This file is part of GLD, the Gnu Linker.
-
-This program is free software; you can redistribute it and/or modify
-it under the terms of the GNU General Public License as published by
-the Free Software Foundation; either version 2 of the License, or
-(at your option) any later version.
-
-This program is distributed in the hope that it will be useful,
-but WITHOUT ANY WARRANTY; without even the implied warranty of
-MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-GNU General Public License for more details.
-
-You should have received a copy of the GNU General Public License
-along with this program; if not, write to the Free Software
-Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  */
-
-#define TARGET_IS_sh
-
-#include "libiberty.h"
-#include "bfd.h"
-#include "sysdep.h"
-#include "bfdlink.h"
-
-#include "ld.h"
-#include "ldmain.h"
-#include "ldmisc.h"
-
-#include "ldexp.h"
-#include "ldlang.h"
-#include "ldfile.h"
-#include "ldemul.h"
-
-static void gldsh_before_parse PARAMS ((void));
-static char *gldsh_get_script PARAMS ((int *isfile));
-
-static void
-gldsh_before_parse()
-{
-#ifndef TARGET_			/* I.e., if not generic.  */
-  ldfile_output_architecture = bfd_arch_sh;
-#endif /* not TARGET_ */
-}
-
-static char *
-gldsh_get_script(isfile)
-     int *isfile;
-{			     
-  *isfile = 0;
-
-  if (link_info.relocateable == true && config.build_constructors == true)
-    return
-concat(
-"OUTPUT_FORMAT(\"coff-sh\")\n\
-OUTPUT_ARCH(sh)\n\
-MEMORY\n\
-{\n\
-  ram : o = 0x1000, l = 512k\n\
-}\n\
- "," SECTIONS\n\
-{\n\
- ","  .text :\n\
-  {\n\
-    *(.text)\n\
-    *(.strings)\n\
-  } \n\
-  .tors :\n\
-  {\n\
-    ___ctors = . ;\n\
-    *(.ctors)\n\
-    ___ctors_end = . ;\n\
-    ___dtors = . ;\n\
-    *(.dtors)\n\
-    ___dtors_end = . ;\n\
-  } \n\
- ","  .data :\n\
-  {\n\
-    *(.data)\n\
-  } \n\
- "," .bss :\n\
-  {\n\
-    *(.bss)\n\
-    *(COMMON)\n\
-  } \n\
- "," .stack   :\n\
-  {\n\
-    *(.stack)\n\
-  } \n\
- "," .stab 0  :\n\
-  {\n\
-    *(.stab)\n\
-  }\n\
- "," .stabstr 0  :\n\
-  {\n\
-    *(.stabstr)\n\
-  }\n\
-}\n\n", NULL)
-  ; else if (link_info.relocateable == true) return
-concat (
-"OUTPUT_FORMAT(\"coff-sh\")\n\
-OUTPUT_ARCH(sh)\n\
- "," MEMORY\n\
-{\n\
-  ram : o = 0x1000, l = 512k\n\
-}\n\
- "," SECTIONS\n\
-{\n\
- ","  .text :\n\
-  {\n\
-    *(.text)\n\
-    *(.strings)\n\
-  } \n\
- ","   .tors :\n\
-  {\n\
-    ___ctors = . ;\n\
-    *(.ctors)\n\
-    ___ctors_end = . ;\n\
-    ___dtors = . ;\n\
-    *(.dtors)\n\
-    ___dtors_end = . ;\n\
-  } \n\
- ","   .data :\n\
-  {\n\
-    *(.data)\n\
-  } \n\
- ","   .bss :\n\
-  {\n\
-    *(.bss)\n\
-    *(COMMON)\n\
-  } \n\
- ","   .stack   :\n\
-  {\n\
-    *(.stack)\n\
-  } \n\
- ","   .stab 0  :\n\
-  {\n\
-    *(.stab)\n\
-  }\n\
- ","   .stabstr 0  :\n\
-  {\n\
-    *(.stabstr)\n\
-  }\n\
-}\n\n", NULL)
-  ; else if (!config.text_read_only) return
-concat (
-"OUTPUT_FORMAT(\"coff-sh\")\n\
-OUTPUT_ARCH(sh)\n\
-MEMORY\n\
-{\n\
-  ram : o = 0x1000, l = 512k\n\
-}\n\
-SECTIONS\n\
-{\n\
- ","   .text :\n\
-  {\n\
-    *(.text)\n\
-    *(.strings)\n\
-     _etext = . ; \n\
-  }  > ram\n\
- ","   .tors :\n\
-  {\n\
-    ___ctors = . ;\n\
-    *(.ctors)\n\
-    ___ctors_end = . ;\n\
-    ___dtors = . ;\n\
-    *(.dtors)\n\
-    ___dtors_end = . ;\n\
-  }  > ram\n\
- ","   .data :\n\
-  {\n\
-    *(.data)\n\
-     _edata = . ; \n\
-  }  > ram\n\
- ","   .bss :\n\
-  {\n\
-     _bss_start = . ; \n\
-    *(.bss)\n\
-    *(COMMON)\n\
-     _end = . ;  \n\
-  }  > ram\n\
- ","   .stack  0x30000   :\n\
-  {\n\
-     _stack = . ; \n\
-    *(.stack)\n\
-  }  > ram\n\
- ","   .stab 0 (NOLOAD) :\n\
-  {\n\
-    *(.stab)\n\
-  }\n\
- ","   .stabstr 0 (NOLOAD) :\n\
-  {\n\
-    *(.stabstr)\n\
-  }\n\
-}\n\n", NULL)
-  ; else if (!config.magic_demand_paged) return
-concat (
-"OUTPUT_FORMAT(\"coff-sh\")\n\
-OUTPUT_ARCH(sh)\n\
-MEMORY\n\
-{\n\
-  ram : o = 0x1000, l = 512k\n\
-}\n\
-SECTIONS\n\
-{\n\
- ","   .text :\n\
-  {\n\
-    *(.text)\n\
-    *(.strings)\n\
-     _etext = . ; \n\
-  }  > ram\n\
- ","   .tors :\n\
-  {\n\
-    ___ctors = . ;\n\
-    *(.ctors)\n\
-    ___ctors_end = . ;\n\
-    ___dtors = . ;\n\
-    *(.dtors)\n\
-    ___dtors_end = . ;\n\
-  }  > ram\n\
- ","   .data :\n\
-  {\n\
-    *(.data)\n\
-     _edata = . ; \n\
-  }  > ram\n\
- ","   .bss :\n\
-  {\n\
-     _bss_start = . ; \n\
-    *(.bss)\n\
-    *(COMMON)\n\
-     _end = . ;  \n\
-  }  > ram\n\
- ","   .stack  0x30000   :\n\
-  {\n\
-     _stack = . ; \n\
-    *(.stack)\n\
-  }  > ram\n\
- ","   .stab 0 (NOLOAD) :\n\
-  {\n\
-    *(.stab)\n\
-  }\n\
- ","   .stabstr 0 (NOLOAD) :\n\
-  {\n\
-    *(.stabstr)\n\
-  }\n\
-}\n\n", NULL)
-  ; else return
-concat (
-"OUTPUT_FORMAT(\"coff-sh\")\n\
-OUTPUT_ARCH(sh)\n\
-MEMORY\n\
-{\n\
-  ram : o = 0x1000, l = 512k\n\
-}\n\
-SECTIONS\n\
-{\n\
- ","   .text :\n\
-  {\n\
-    *(.text)\n\
-    *(.strings)\n\
-     _etext = . ; \n\
-  }  > ram\n\
- ","   .tors :\n\
-  {\n\
-    ___ctors = . ;\n\
-    *(.ctors)\n\
-    ___ctors_end = . ;\n\
-    ___dtors = . ;\n\
-    *(.dtors)\n\
-    ___dtors_end = . ;\n\
-  }  > ram\n\
- ","   .data :\n\
-  {\n\
-    *(.data)\n\
-     _edata = . ; \n\
-  }  > ram\n\
- ","   .bss :\n\
-  {\n\
-     _bss_start = . ; \n\
-    *(.bss)\n\
-    *(COMMON)\n\
-     _end = . ;  \n\
-  }  > ram\n\
- ","   .stack  0x30000   :\n\
-  {\n\
-     _stack = . ; \n\
-    *(.stack)\n\
-  }  > ram\n\
- ","   .stab 0 (NOLOAD) :\n\
-  {\n\
-    *(.stab)\n\
-  }\n\
- ","   .stabstr 0 (NOLOAD) :\n\
-  {\n\
-    *(.stabstr)\n\
-  }\n\
-}\n\n", NULL)
-; }
-
-struct ld_emulation_xfer_struct ld_sh_emulation = 
-{
-  gldsh_before_parse,
-  syslib_default,
-  hll_default,
-  after_parse_default,
-  after_open_default,
-  after_allocation_default,
-  set_output_arch_default,
-  ldemul_default_target,
-  before_allocation_default,
-  gldsh_get_script,
-  "sh",
-  "coff-sh"
-};
diff --git a/ld/mpw-idtmips.c b/ld/mpw-idtmips.c
deleted file mode 100644
index a602397..0000000
--- a/ld/mpw-idtmips.c
+++ /dev/null
@@ -1,433 +0,0 @@
-/* This file is is generated by a shell script.  DO NOT EDIT! */
-
-/* Handle embedded relocs for MIPS.
-   Copyright 1994, 1997, 2000 Free Software Foundation, Inc.
-   Written by Ian Lance Taylor <ian@cygnus.com> based on generic.em.
-
-This file is part of GLD, the Gnu Linker.
-
-This program is free software; you can redistribute it and/or modify
-it under the terms of the GNU General Public License as published by
-the Free Software Foundation; either version 2 of the License, or
-(at your option) any later version.
-
-This program is distributed in the hope that it will be useful,
-but WITHOUT ANY WARRANTY; without even the implied warranty of
-MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-GNU General Public License for more details.
-
-You should have received a copy of the GNU General Public License
-along with this program; if not, write to the Free Software
-Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  */
-
-#define TARGET_IS_mipsidt
-
-#include "libiberty.h"
-#include "bfd.h"
-#include "sysdep.h"
-#include "bfdlink.h"
-
-#include "ld.h"
-#include "ldmain.h"
-#include "ldmisc.h"
-
-#include "ldexp.h"
-#include "ldlang.h"
-#include "ldfile.h"
-#include "ldemul.h"
-
-static void gldmipsidt_before_parse PARAMS ((void));
-static void gldmipsidt_after_open PARAMS ((void));
-static void check_sections PARAMS ((bfd *, asection *, PTR));
-static void gldmipsidt_after_allocation PARAMS ((void));
-static char *gldmipsidt_get_script PARAMS ((int *isfile));
-
-static void
-gldmipsidt_before_parse()
-{
-#ifndef TARGET_			/* I.e., if not generic.  */
-  ldfile_output_architecture = bfd_arch_mips;
-#endif /* not TARGET_ */
-}
-
-/* This function is run after all the input files have been opened.
-   We create a .rel.sdata section for each input file with a non zero
-   .sdata section.  The BFD backend will fill in these sections with
-   magic numbers which can be used to relocate the data section at run
-   time.  This will only do the right thing if all the input files
-   have been compiled using -membedded-pic.  */
-
-static void
-gldmipsidt_after_open ()
-{
-  bfd *abfd;
-
-  if (! command_line.embedded_relocs
-      || link_info.relocateable)
-    return;
-
-  for (abfd = link_info.input_bfds; abfd != NULL; abfd = abfd->link_next)
-    {
-      asection *datasec;
-
-      datasec = bfd_get_section_by_name (abfd, ".sdata");
-
-      /* Note that we assume that the reloc_count field has already
-         been set up.  We could call bfd_get_reloc_upper_bound, but
-         that returns the size of a memory buffer rather than a reloc
-         count.  We do not want to call bfd_canonicalize_reloc,
-         because although it would always work it would force us to
-         read in the relocs into BFD canonical form, which would waste
-         a significant amount of time and memory.  */
-      if (datasec != NULL && datasec->reloc_count > 0)
-	{
-	  asection *relsec;
-
-	  relsec = bfd_make_section (abfd, ".rel.sdata");
-	  if (relsec == NULL
-	      || ! bfd_set_section_flags (abfd, relsec,
-					  (SEC_ALLOC
-					   | SEC_LOAD
-					   | SEC_HAS_CONTENTS
-					   | SEC_IN_MEMORY))
-	      || ! bfd_set_section_alignment (abfd, relsec, 2)
-	      || ! bfd_set_section_size (abfd, relsec,
-					 datasec->reloc_count * 4))
-	    einfo (_("%F%B: can not create .rel.sdata section: %E\n"));
-	}
-
-      /* Double check that all other data sections are empty, as is
-         required for embedded PIC code.  */
-      bfd_map_over_sections (abfd, check_sections, (PTR) datasec);
-    }
-}
-
-/* Check that of the data sections, only the .sdata section has
-   relocs.  This is called via bfd_map_over_sections.  */
-
-static void
-check_sections (abfd, sec, sdatasec)
-     bfd *abfd;
-     asection *sec;
-     PTR sdatasec;
-{
-  if ((bfd_get_section_flags (abfd, sec) & SEC_CODE) == 0
-      && sec != (asection *) sdatasec
-      && sec->reloc_count != 0)
-    einfo (_("%F%X: section %s has relocs; can not use --embedded-relocs\n"),
-	   abfd, bfd_get_section_name (abfd, sec));
-}
-
-/* This function is called after the section sizes and offsets have
-   been set.  If we are generating embedded relocs, it calls a special
-   BFD backend routine to do the work.  */
-
-static void
-gldmipsidt_after_allocation ()
-{
-  bfd *abfd;
-
-  if (! command_line.embedded_relocs
-      || link_info.relocateable)
-    return;
-
-  for (abfd = link_info.input_bfds; abfd != NULL; abfd = abfd->link_next)
-    {
-      asection *datasec, *relsec;
-      char *errmsg;
-
-      datasec = bfd_get_section_by_name (abfd, ".sdata");
-
-      if (datasec == NULL || datasec->reloc_count == 0)
-	continue;
-
-      relsec = bfd_get_section_by_name (abfd, ".rel.sdata");
-      ASSERT (relsec != NULL);
-
-      if (! bfd_mips_ecoff_create_embedded_relocs (abfd, &link_info,
-						   datasec, relsec,
-						   &errmsg))
-	{
-	  if (errmsg == NULL)
-	    einfo (_("%B%X: can not create runtime reloc information: %E\n"),
-		   abfd);
-	  else
-	    einfo (_("%X%B: can not create runtime reloc information: %s\n"),
-		   abfd, errmsg);
-	}
-    }
-}
-
-static char *
-gldmipsidt_get_script(isfile)
-     int *isfile;
-{			     
-  *isfile = 0;
-
-  if (link_info.relocateable == true && config.build_constructors == true)
-    return
-concat(
-"OUTPUT_FORMAT(\"ecoff-bigmips\", \"ecoff-bigmips\",\n\
-	      \"ecoff-littlemips\")\n\
- SEARCH_DIR(/usr/local/mips-idt-ecoff/lib);\n\
-ENTRY(start)\n\
-SECTIONS\n\
-{\n\
-  .text : {\n\
-    ;\n\
-    *(.init)\n\
-    ;\n\
-    *(.text)\n\
-    *(.rel.sdata)\n\
-    *(.fini)\n\
-    ;\n\
-    ;\n\
-  }\n\
- ","  .rdata : {\n\
-    *(.rdata)\n\
-  }\n\
-  .data : {\n\
-    *(.data)\n\
-    CONSTRUCTORS\n\
-  }\n\
-  .lit8 : {\n\
-    *(.lit8)\n\
-  }\n\
-  .lit4 : {\n\
-    *(.lit4)\n\
-  }\n\
- ","  .sdata : {\n\
-    *(.sdata)\n\
-  }\n\
-  .sbss : {\n\
-    *(.sbss)\n\
-    *(.scommon)\n\
-  }\n\
-  .bss : {\n\
-    *(.bss)\n\
-    *(COMMON)\n\
-  }\n\
-}\n\n", NULL)
-  ; else if (link_info.relocateable == true) return
-"OUTPUT_FORMAT(\"ecoff-bigmips\", \"ecoff-bigmips\",\n\
-	      \"ecoff-littlemips\")\n\
- SEARCH_DIR(/usr/local/mips-idt-ecoff/lib);\n\
-ENTRY(start)\n\
-SECTIONS\n\
-{\n\
-  .text : {\n\
-    ;\n\
-    *(.init)\n\
-    ;\n\
-    *(.text)\n\
-    *(.rel.sdata)\n\
-    *(.fini)\n\
-    ;\n\
-    ;\n\
-  }\n\
-  .rdata : {\n\
-    *(.rdata)\n\
-  }\n\
-  .data : {\n\
-    *(.data)\n\
-  }\n\
-  .lit8 : {\n\
-    *(.lit8)\n\
-  }\n\
-  .lit4 : {\n\
-    *(.lit4)\n\
-  }\n\
-  .sdata : {\n\
-    *(.sdata)\n\
-  }\n\
-  .sbss : {\n\
-    *(.sbss)\n\
-    *(.scommon)\n\
-  }\n\
-  .bss : {\n\
-    *(.bss)\n\
-    *(COMMON)\n\
-  }\n\
-}\n\n"
-  ; else if (!config.text_read_only) return
-concat(
-"OUTPUT_FORMAT(\"ecoff-bigmips\", \"ecoff-bigmips\",\n\
-	      \"ecoff-littlemips\")\n\
- SEARCH_DIR(/usr/local/mips-idt-ecoff/lib);\n\
-ENTRY(start)\n\
-SECTIONS\n\
-{\n\
-  . = 0xa0012000;\n\
-  .text : {\n\
-     _ftext = . ;\n\
-    *(.init)\n\
-     eprol  =  .;\n\
-    *(.text)\n\
-    PROVIDE (__runtime_reloc_start = .);\n\
-    *(.rel.sdata)\n\
-    PROVIDE (__runtime_reloc_stop = .);\n\
-    *(.fini)\n\
-     etext  =  .;\n\
-     _etext  =  .;\n\
-","  }\n\
-  . = .;\n\
-  .rdata : {\n\
-    *(.rdata)\n\
-  }\n\
-   _fdata = ALIGN(16);\n\
-  .data : {\n\
-    *(.data)\n\
-    CONSTRUCTORS\n\
-  }\n\
-   _gp = ALIGN(16) + 0x8000;\n\
-  .lit8 : {\n\
-    *(.lit8)\n\
-  }\n\
-  .lit4 : {\n\
-    *(.lit4)\n\
-  }\n\
-  .sdata : {\n\
-    *(.sdata)\n\
-  }\n\
-","   edata  =  .;\n\
-   _edata  =  .;\n\
-   _fbss = .;\n\
-  .sbss : {\n\
-    *(.sbss)\n\
-    *(.scommon)\n\
-  }\n\
-  .bss : {\n\
-    *(.bss)\n\
-    *(COMMON)\n\
-  }\n\
-   end = .;\n\
-   _end = .;\n\
-}\n\n"
-, NULL)
-  ; else if (!config.magic_demand_paged) return
-concat (
-"OUTPUT_FORMAT(\"ecoff-bigmips\", \"ecoff-bigmips\",\n\
-	      \"ecoff-littlemips\")\n\
- SEARCH_DIR(/usr/local/mips-idt-ecoff/lib);\n\
-ENTRY(start)\n\
-SECTIONS\n\
-{\n\
-  . = 0xa0012000;\n\
-  .text : {\n\
-     _ftext = . ;\n\
-    *(.init)\n\
-     eprol  =  .;\n\
-    *(.text)\n\
-    PROVIDE (__runtime_reloc_start = .);\n\
-    *(.rel.sdata)\n\
-    PROVIDE (__runtime_reloc_stop = .);\n\
-    *(.fini)\n\
-     etext  =  .;\n\
-     _etext  =  .;\n\
- ","  }\n\
-  . = .;\n\
-  .rdata : {\n\
-    *(.rdata)\n\
-  }\n\
-   _fdata = ALIGN(16);\n\
-  .data : {\n\
-    *(.data)\n\
-    CONSTRUCTORS\n\
-  }\n\
-   _gp = ALIGN(16) + 0x8000;\n\
-  .lit8 : {\n\
-    *(.lit8)\n\
- ","  }\n\
-  .lit4 : {\n\
-    *(.lit4)\n\
-  }\n\
-  .sdata : {\n\
-    *(.sdata)\n\
-  }\n\
-   edata  =  .;\n\
-   _edata  =  .;\n\
-   _fbss = .;\n\
-  .sbss : {\n\
-    *(.sbss)\n\
-    *(.scommon)\n\
- ","  }\n\
-  .bss : {\n\
-    *(.bss)\n\
-    *(COMMON)\n\
-  }\n\
-   end = .;\n\
-   _end = .;\n\
-}\n\n"
-, NULL)
-  ; else return
-concat (
-"OUTPUT_FORMAT(\"ecoff-bigmips\", \"ecoff-bigmips\",\n\
-	      \"ecoff-littlemips\")\n\
- SEARCH_DIR(/usr/local/mips-idt-ecoff/lib);\n\
-ENTRY(start)\n\
-SECTIONS\n\
-{\n\
-  . = 0xa0012000;\n\
-  .text : {\n\
-     _ftext = . ;\n\
-    *(.init)\n\
-     eprol  =  .;\n\
-    *(.text)\n\
-    PROVIDE (__runtime_reloc_start = .);\n\
-    *(.rel.sdata)\n\
-    PROVIDE (__runtime_reloc_stop = .);\n\
-    *(.fini)\n\
-     etext  =  .;\n\
-     _etext  =  .;\n\
- ","  }\n\
-  . = .;\n\
-  .rdata : {\n\
-    *(.rdata)\n\
-  }\n\
-   _fdata = ALIGN(16);\n\
-  .data : {\n\
-    *(.data)\n\
-    CONSTRUCTORS\n\
-  }\n\
-   _gp = ALIGN(16) + 0x8000;\n\
-  .lit8 : {\n\
-    *(.lit8)\n\
-  }\n\
-  .lit4 : {\n\
-    *(.lit4)\n\
- ","  }\n\
-  .sdata : {\n\
-    *(.sdata)\n\
-  }\n\
-   edata  =  .;\n\
-   _edata  =  .;\n\
-   _fbss = .;\n\
-  .sbss : {\n\
-    *(.sbss)\n\
-    *(.scommon)\n\
-  }\n\
-  .bss : {\n\
-    *(.bss)\n\
-    *(COMMON)\n\
-  }\n\
-   end = .;\n\
-   _end = .;\n\
-}\n\n"
-, NULL)
-; }
-
-struct ld_emulation_xfer_struct ld_mipsidt_emulation = 
-{
-  gldmipsidt_before_parse,
-  syslib_default,
-  hll_default,
-  after_parse_default,
-  gldmipsidt_after_open,
-  gldmipsidt_after_allocation,
-  set_output_arch_default,
-  ldemul_default_target,
-  before_allocation_default,
-  gldmipsidt_get_script,
-  "mipsidt",
-  "ecoff-bigmips"
-};