* Makefile.am (CONFIG_STATUS_DEPENDENCIES): Define.

	(config.status): Delete rule.
	Add extra dependencies to cover sourced emulparams files.
	* Makefile.in: Regenerate.

	* scripttempl/elf.sc: Order <section>, <section>.* and
	corresponding linkonce sections as seen in input files.
	Formatting fixes.  Zero vma of all sections if not relocating.
	(STACK): Define and insert if STACK_ADDR defined.
	(OTHER_RELOCATING_SECTIONS): Delete.
	(OTHER_END_SYMBOLS): Define.
	(OTHER_READONLY_SECTIONS): Always insert, not just when relocating.
	(OTHER_READWRITE_SECTIONS): Likewise.
	(OTHER_GOT_SECTIONS): Likewise.
	(OTHER_SDATA_SECTIONS): Likewise.
	(OTHER_BSS_SECTIONS): Likewise.
	* scripttempl/elfi370.sc (OTHER_READONLY_SECTIONS): Likewise.
	(OTHER_READWRITE_SECTIONS): Likewise.
	* scripttempl/nw.sc (OTHER_READONLY_SECTIONS): Likewise.
	(OTHER_READWRITE_SECTIONS): Likewise

	* emulparams/armelf.sh (OTHER_RELOCATING_SECTIONS): Delete.
	(STACK_ADDR): Define.
	* emulparams/armelf_oabi.sh: As for armelf.sh.
	* emulparams/elf32mcore.sh: As for armelf.sh.
	* emulparams/h8300elf.sh: As for armelf.sh.
	* emulparams/mn10200.sh: As for armelf.sh.
	* emulparams/shelf.sh: As for armelf.sh.

	* emulparams/elf32fr30.sh (OTHER_RELOCATING_SECTIONS): Delete.
	(OTHER_END_SYMBOLS): Define.
	* emulparams/m32relf.sh: As for elf32fr30.sh.
	* emulparams/h8300helf.sh: As for elf32fr30.sh.
	* emulparams/h8300self.sh: As for elf32fr30.sh.

	* emulparams/criself.sh (OTHER_READONLY_SECTIONS): Protect symbol
	defines with RELOCATING test.
	(OTHER_SDATA_SECTIONS): Likewise.
	(OTHER_RELOCATING_SECTIONS): Delete, replacing with..
	(OTHER_END_SYMBOLS): ..this.
	* emulparams/crislinux.sh: As for criself.sh.

	* emulparams/elf32bmipn32.sh (OTHER_SDATA_SECTIONS): Zero vma
	if not relocating.
	(OTHER_RELOCATING_SECTIONS): Delete, replacing with..
	(OTHER_SECTIONS): ..this.  Zero vma if not relocating.  Order
	normal and linkonce sections as seen in input files.
	* emulparams/elf32bmip.sh (DATA_ADDR): Don't define if EMBEDDED.
	(TEXT_DYNAMIC): Likewise.
	(INITIAL_READONLY_SECTIONS): Zero vma if not relocating.
	(OTHER_SDATA_SECTIONS): Likewise.
	* emulparams/elf32ppc.sh (OTHER_READWRITE_SECTIONS): Likewise.
	* emulparams/shlelf_linux.sh (OTHER_READWRITE_SECTIONS): Likewise.
	* emulparams/elf64alpha.sh (OTHER_READONLY_SECTIONS): Likewise.
	* emulparams/hppalinux.sh (OTHER_READONLY_SECTIONS): Likewise.
	* emulparams/elf64_aix.sh (OTHER_GOT_SECTIONS): Likewise.
	(OTHER_PLT_RELOC_SECTIONS): Likewise.
	(OTHER_READONLY_SECTIONS): Likewise.  Order normal and linkonce
	sections as seen in input files.
	* emulparams/elf64_ia64.sh: As for emulparams/elf64_aix.sh.
	* emulparams/hppa64linux.sh (OTHER_READONLY_SECTIONS): Zero vma
	if not relocating.
	(OTHER_READWRITE_SECTIONS, OTHER_BSS_SECTIONS): Likewise.
	(OTHER_BSS_END_SYMBOLS): Merge from elf64hppa.sh.
	* emulparams/elf64mmix.sh (OTHER_RELOCATING_SECTIONS): Delete.
	(OTHER_SECTIONS): Instead, use this..
	(OTHER_END_SYMBOLS): ..and this.

	* emulparams/elf32b4300.sh: Source elf32bmip.sh, remove duplicates.
	* emulparams/elf32bsmip.sh: Likewise.
	* emulparams/elf32btsmip.sh: Likewise.
	* emulparams/elf32ebmip.sh: Likewise.
	* emulparams/elf32lmip.sh: Likewise.
	* emulparams/elf32elmip.sh: Source elf32lmip.sh, remove duplicates.
	* emulparams/elf32lsmip.sh: Likewise.
	* emulparams/elf32ltsmip.sh: Source elf32btsmip.sh, remove duplicates.
	* emulparams/elf32l4300.sh: Source elf32b4300.sh, remove duplicates.
	* emulparams/elf64bmip.sh: Source elf32bmipn32.sh, remove duplicates.
	* emulparams/elf64btsmip.sh: Likewise.
	* emulparams/elf64ltsmip.sh: Source elf64btsmip.sh, remove duplicates.
	* emulparams/elf32lppc.sh: Source elf32ppc.sh, remove duplicates.
	* emulparams/elf32ppclinux.sh: Likewise.
	* emulparams/elf32ppcsim.sh: Likewise.
	* emulparams/elf32lppcsim.sh: Source elf32lppc.sh, remove duplicates.
	* emulparams/elf64hppa.sh: Source hppa64linux.sh, remove duplicates.
	* emulparams/h8300helf.sh: Source h8300elf.sh, remove duplicates.
	* emulparams/h8300self.sh: Likewise.
	* emulparams/mn10300.sh: Source mn10200.sh, remove duplicates.
	* emulparams/sh.sh: Comment.
	* emulparams/shl.sh: Source sh.sh, remove duplicates.
	* emulparams/shlelf.sh: Source shelf.sh, remove duplicates.
	* emulparams/shelf_linux.sh: Source shlelf_linux.sh, remove duplicates.

50 files changed, 715 insertions, 1234 deletions

diff --git a/ld/ChangeLog b/ld/ChangeLog
index ca18d3a..52ff944 100644
--- a/ld/ChangeLog
+++ b/ld/ChangeLog
@@ -1,3 +1,98 @@
+2001-11-22  Alan Modra  <amodra@bigpond.net.au>
+
+	* Makefile.am (CONFIG_STATUS_DEPENDENCIES): Define.
+	(config.status): Delete rule.
+	Add extra dependencies to cover sourced emulparams files.
+	* Makefile.in: Regenerate.
+
+	* scripttempl/elf.sc: Order <section>, <section>.* and
+	corresponding linkonce sections as seen in input files.
+	Formatting fixes.  Zero vma of all sections if not relocating.
+	(STACK): Define and insert if STACK_ADDR defined.
+	(OTHER_RELOCATING_SECTIONS): Delete.
+	(OTHER_END_SYMBOLS): Define.
+	(OTHER_READONLY_SECTIONS): Always insert, not just when relocating.
+	(OTHER_READWRITE_SECTIONS): Likewise.
+	(OTHER_GOT_SECTIONS): Likewise.
+	(OTHER_SDATA_SECTIONS): Likewise.
+	(OTHER_BSS_SECTIONS): Likewise.
+	* scripttempl/elfi370.sc (OTHER_READONLY_SECTIONS): Likewise.
+	(OTHER_READWRITE_SECTIONS): Likewise.
+	* scripttempl/nw.sc (OTHER_READONLY_SECTIONS): Likewise.
+	(OTHER_READWRITE_SECTIONS): Likewise
+
+	* emulparams/armelf.sh (OTHER_RELOCATING_SECTIONS): Delete.
+	(STACK_ADDR): Define.
+	* emulparams/armelf_oabi.sh: As for armelf.sh.
+	* emulparams/elf32mcore.sh: As for armelf.sh.
+	* emulparams/h8300elf.sh: As for armelf.sh.
+	* emulparams/mn10200.sh: As for armelf.sh.
+	* emulparams/shelf.sh: As for armelf.sh.
+
+	* emulparams/elf32fr30.sh (OTHER_RELOCATING_SECTIONS): Delete.
+	(OTHER_END_SYMBOLS): Define.
+	* emulparams/m32relf.sh: As for elf32fr30.sh.
+	* emulparams/h8300helf.sh: As for elf32fr30.sh.
+	* emulparams/h8300self.sh: As for elf32fr30.sh.
+
+	* emulparams/criself.sh (OTHER_READONLY_SECTIONS): Protect symbol
+	defines with RELOCATING test.
+	(OTHER_SDATA_SECTIONS): Likewise.
+	(OTHER_RELOCATING_SECTIONS): Delete, replacing with..
+	(OTHER_END_SYMBOLS): ..this.
+	* emulparams/crislinux.sh: As for criself.sh.
+
+	* emulparams/elf32bmipn32.sh (OTHER_SDATA_SECTIONS): Zero vma
+	if not relocating.
+	(OTHER_RELOCATING_SECTIONS): Delete, replacing with..
+	(OTHER_SECTIONS): ..this.  Zero vma if not relocating.  Order
+	normal and linkonce sections as seen in input files.
+	* emulparams/elf32bmip.sh (DATA_ADDR): Don't define if EMBEDDED.
+	(TEXT_DYNAMIC): Likewise.
+	(INITIAL_READONLY_SECTIONS): Zero vma if not relocating.
+	(OTHER_SDATA_SECTIONS): Likewise.
+	* emulparams/elf32ppc.sh (OTHER_READWRITE_SECTIONS): Likewise.
+	* emulparams/shlelf_linux.sh (OTHER_READWRITE_SECTIONS): Likewise.
+	* emulparams/elf64alpha.sh (OTHER_READONLY_SECTIONS): Likewise.
+	* emulparams/hppalinux.sh (OTHER_READONLY_SECTIONS): Likewise.
+	* emulparams/elf64_aix.sh (OTHER_GOT_SECTIONS): Likewise.
+	(OTHER_PLT_RELOC_SECTIONS): Likewise.
+	(OTHER_READONLY_SECTIONS): Likewise.  Order normal and linkonce
+	sections as seen in input files.
+	* emulparams/elf64_ia64.sh: As for emulparams/elf64_aix.sh.
+	* emulparams/hppa64linux.sh (OTHER_READONLY_SECTIONS): Zero vma
+	if not relocating.
+	(OTHER_READWRITE_SECTIONS, OTHER_BSS_SECTIONS): Likewise.
+	(OTHER_BSS_END_SYMBOLS): Merge from elf64hppa.sh.
+	* emulparams/elf64mmix.sh (OTHER_RELOCATING_SECTIONS): Delete.
+	(OTHER_SECTIONS): Instead, use this..
+	(OTHER_END_SYMBOLS): ..and this.
+
+	* emulparams/elf32b4300.sh: Source elf32bmip.sh, remove duplicates.
+	* emulparams/elf32bsmip.sh: Likewise.
+	* emulparams/elf32btsmip.sh: Likewise.
+	* emulparams/elf32ebmip.sh: Likewise.
+	* emulparams/elf32lmip.sh: Likewise.
+	* emulparams/elf32elmip.sh: Source elf32lmip.sh, remove duplicates.
+	* emulparams/elf32lsmip.sh: Likewise.
+	* emulparams/elf32ltsmip.sh: Source elf32btsmip.sh, remove duplicates.
+	* emulparams/elf32l4300.sh: Source elf32b4300.sh, remove duplicates.
+	* emulparams/elf64bmip.sh: Source elf32bmipn32.sh, remove duplicates.
+	* emulparams/elf64btsmip.sh: Likewise.
+	* emulparams/elf64ltsmip.sh: Source elf64btsmip.sh, remove duplicates.
+	* emulparams/elf32lppc.sh: Source elf32ppc.sh, remove duplicates.
+	* emulparams/elf32ppclinux.sh: Likewise.
+	* emulparams/elf32ppcsim.sh: Likewise.
+	* emulparams/elf32lppcsim.sh: Source elf32lppc.sh, remove duplicates.
+	* emulparams/elf64hppa.sh: Source hppa64linux.sh, remove duplicates.
+	* emulparams/h8300helf.sh: Source h8300elf.sh, remove duplicates.
+	* emulparams/h8300self.sh: Likewise.
+	* emulparams/mn10300.sh: Source mn10200.sh, remove duplicates.
+	* emulparams/sh.sh: Comment.
+	* emulparams/shl.sh: Source sh.sh, remove duplicates.
+	* emulparams/shlelf.sh: Source shelf.sh, remove duplicates.
+	* emulparams/shelf_linux.sh: Source shlelf_linux.sh, remove duplicates.
+
 2001-11-21  David Heine <dlheine@tensilica.com>
 	    Alan Modra  <amodra@bigpond.net.au>
 
@@ -44,7 +139,7 @@
 
 Tue Nov 13 11:27:14 2001  Ross Alexander <ross.alexander@uk.neceur.com>
 
-	* emulparams/elf64hppa.sh (OTHER_BSS_END_SECTIONS): Add
+	* emulparams/elf64hppa.sh (OTHER_BSS_END_SYMBOLS): Add
 	additional symbols referenced by newer crt0.o files from HP.
 
 2001-11-12  Anthony Green  <green@redhat.com>
diff --git a/ld/Makefile.am b/ld/Makefile.am
index 06e3a29..3d1ed7f 100644
--- a/ld/Makefile.am
+++ b/ld/Makefile.am
@@ -459,42 +459,53 @@ eelf32_i960.c: $(srcdir)/emulparams/elf32_i960.sh \
   $(srcdir)/emultempl/elf32.em $(srcdir)/scripttempl/elf.sc ${GEN_DEPENDS}
 	${GENSCRIPTS} elf32_i960 "$(tdir_elf32_i960)"
 eelf32b4300.c: $(srcdir)/emulparams/elf32b4300.sh \
+  $(srcdir)/emulparams/elf32bmip.sh \
   $(srcdir)/emultempl/elf32.em $(srcdir)/scripttempl/elf.sc ${GEN_DEPENDS}
 	${GENSCRIPTS} elf32b4300 "$(tdir_elf32b4300)"
 eelf32bmip.c: $(srcdir)/emulparams/elf32bmip.sh \
   $(srcdir)/emultempl/elf32.em $(srcdir)/scripttempl/elf.sc ${GEN_DEPENDS}
 	${GENSCRIPTS} elf32bmip "$(tdir_elf32bmip)"
 eelf32bsmip.c: $(srcdir)/emulparams/elf32bsmip.sh \
+  $(srcdir)/emulparams/elf32bmip.sh \
   $(srcdir)/emultempl/elf32.em $(srcdir)/scripttempl/elf.sc ${GEN_DEPENDS}
 	${GENSCRIPTS} elf32bsmip "$(tdir_elf32bsmip)"
 eelf32btsmip.c: $(srcdir)/emulparams/elf32btsmip.sh \
+  $(srcdir)/emulparams/elf32bmip.sh \
   $(srcdir)/emultempl/elf32.em $(srcdir)/scripttempl/elf.sc ${GEN_DEPENDS}
 	${GENSCRIPTS} elf32btsmip "$(tdir_elf32btsmip)"
 eelf32ltsmip.c: $(srcdir)/emulparams/elf32ltsmip.sh \
+  $(srcdir)/emulparams/elf32btsmip.sh $(srcdir)/emulparams/elf32bmip.sh \
   $(srcdir)/emultempl/elf32.em $(srcdir)/scripttempl/elf.sc ${GEN_DEPENDS}
 	${GENSCRIPTS} elf32ltsmip "$(tdir_elf32ltsmip)"
 eelf32ebmip.c: $(srcdir)/emulparams/elf32ebmip.sh \
+  $(srcdir)/emulparams/elf32bmip.sh \
   $(srcdir)/emultempl/elf32.em $(srcdir)/scripttempl/elf.sc ${GEN_DEPENDS}
 	${GENSCRIPTS} elf32ebmip "$(tdir_elf32ebmip)"
 eelf32elmip.c: $(srcdir)/emulparams/elf32elmip.sh \
+  $(srcdir)/emulparams/elf32lmip.sh $(srcdir)/emulparams/elf32bmip.sh \
   $(srcdir)/emultempl/elf32.em $(srcdir)/scripttempl/elf.sc ${GEN_DEPENDS}
 	${GENSCRIPTS} elf32elmip "$(tdir_elf32elmip)"
 eelf32bmipn32.c: $(srcdir)/emulparams/elf32bmipn32.sh \
   $(srcdir)/emultempl/elf32.em $(srcdir)/scripttempl/elf.sc ${GEN_DEPENDS}
 	${GENSCRIPTS} elf32bmipn32 "$(tdir_elf32bmipn32)"
 eelf32l4300.c: $(srcdir)/emulparams/elf32l4300.sh \
+  $(srcdir)/emulparams/elf32b4300.sh $(srcdir)/emulparams/elf32bmip.sh \
   $(srcdir)/emultempl/elf32.em $(srcdir)/scripttempl/elf.sc ${GEN_DEPENDS}
 	${GENSCRIPTS} elf32l4300 "$(tdir_elf32l4300)"
 eelf32lmip.c: $(srcdir)/emulparams/elf32lmip.sh \
+  $(srcdir)/emulparams/elf32bmip.sh \
   $(srcdir)/emultempl/elf32.em $(srcdir)/scripttempl/elf.sc ${GEN_DEPENDS}
 	${GENSCRIPTS} elf32lmip "$(tdir_elf32lmip)"
 eelf32lppc.c: $(srcdir)/emulparams/elf32lppc.sh \
+  $(srcdir)/emulparams/elf32ppc.sh \
   $(srcdir)/emultempl/elf32.em $(srcdir)/scripttempl/elf.sc ${GEN_DEPENDS}
 	${GENSCRIPTS} elf32lppc "$(tdir_elf32lppc)"
 eelf32lppcsim.c: $(srcdir)/emulparams/elf32lppcsim.sh \
+  $(srcdir)/emulparams/elf32lppc.sh $(srcdir)/emulparams/elf32ppc.sh \
   $(srcdir)/emultempl/elf32.em $(srcdir)/scripttempl/elf.sc ${GEN_DEPENDS}
 	${GENSCRIPTS} elf32lppcsim "$(tdir_elf32lppcsim)"
 eelf32lsmip.c: $(srcdir)/emulparams/elf32lsmip.sh \
+  $(srcdir)/emulparams/elf32lmip.sh $(srcdir)/emulparams/elf32bmip.sh \
   $(srcdir)/emultempl/elf32.em $(srcdir)/scripttempl/elf.sc ${GEN_DEPENDS}
 	${GENSCRIPTS} elf32lsmip "$(tdir_elf32lsmip)"
 eelf32openrisc.c: $(srcdir)/emulparams/elf32openrisc.sh \
@@ -504,15 +515,18 @@ eelf32ppc.c: $(srcdir)/emulparams/elf32ppc.sh \
   $(srcdir)/emultempl/elf32.em $(srcdir)/scripttempl/elf.sc ${GEN_DEPENDS}
 	${GENSCRIPTS} elf32ppc "$(tdir_elf32ppc)"
 eelf32ppcsim.c: $(srcdir)/emulparams/elf32ppcsim.sh \
+  $(srcdir)/emulparams/elf32ppc.sh \
   $(srcdir)/emultempl/elf32.em $(srcdir)/scripttempl/elf.sc ${GEN_DEPENDS}
 	${GENSCRIPTS} elf32ppcsim "$(tdir_elf32ppcsim)"
 eelf32ppclinux.c: $(srcdir)/emulparams/elf32ppclinux.sh \
+  $(srcdir)/emulparams/elf32ppc.sh \
   $(srcdir)/emultempl/elf32.em $(srcdir)/scripttempl/elf.sc ${GEN_DEPENDS}
 	${GENSCRIPTS} elf32ppclinux "$(tdir_elf32ppclinux)"
 eelf64ppc.c: $(srcdir)/emulparams/elf64ppc.sh \
   $(srcdir)/emultempl/elf32.em $(srcdir)/scripttempl/elf.sc ${GEN_DEPENDS}
 	${GENSCRIPTS} elf64ppc "$(tdir_elf64ppc)"
 eelf64lppc.c: $(srcdir)/emulparams/elf64lppc.sh \
+  $(srcdir)/emulparams/elf64ppc.sh \
   $(srcdir)/emultempl/elf32.em $(srcdir)/scripttempl/elf.sc ${GEN_DEPENDS}
 	${GENSCRIPTS} elf64lppc "$(tdir_elf64lppc)"
 eelf32i370.c: $(srcdir)/emulparams/elf32i370.sh \
@@ -522,6 +536,7 @@ eelf64alpha.c: $(srcdir)/emulparams/elf64alpha.sh \
   $(srcdir)/emultempl/elf32.em $(srcdir)/scripttempl/elf.sc ${GEN_DEPENDS}
 	${GENSCRIPTS} elf64alpha "$(tdir_elf64alpha)"
 eelf64hppa.c: $(srcdir)/emulparams/elf64hppa.sh \
+  $(srcdir)/emulparams/hppa64linux.sh \
   $(srcdir)/emultempl/elf32.em $(srcdir)/scripttempl/elf.sc ${GEN_DEPENDS}
 	${GENSCRIPTS} elf64hppa "$(tdir_elf64hppa)"
 eelf64_aix.c: $(srcdir)/emulparams/elf64_aix.sh \
@@ -538,6 +553,7 @@ eelf64_sparc.c: $(srcdir)/emulparams/elf64_sparc.sh \
   $(srcdir)/emultempl/elf32.em $(srcdir)/scripttempl/elf.sc ${GEN_DEPENDS}
 	${GENSCRIPTS} elf64_sparc "$(tdir_elf64_sparc)"
 eelf64bmip.c: $(srcdir)/emulparams/elf64bmip.sh \
+  $(srcdir)/emulparams/elf32bmipn32.sh \
   $(srcdir)/emultempl/elf32.em $(srcdir)/scripttempl/elf.sc ${GEN_DEPENDS}
 	${GENSCRIPTS} elf64bmip "$(tdir_elf64bmip)"
 eelf64mmix.c: $(srcdir)/emulparams/elf64mmix.sh \
@@ -549,9 +565,11 @@ emmo.c: $(srcdir)/emulparams/mmo.sh $(srcdir)/emultempl/mmix-elfnmmo.em \
   $(srcdir)/scripttempl/mmo.sc ${GEN_DEPENDS}
 	${GENSCRIPTS} mmo "$(tdir_mmo)"
 eelf64btsmip.c: $(srcdir)/emulparams/elf64btsmip.sh \
+  $(srcdir)/emulparams/elf32bmipn32.sh \
   $(srcdir)/emultempl/elf32.em $(srcdir)/scripttempl/elf.sc ${GEN_DEPENDS}
 	${GENSCRIPTS} elf64btsmip "$(tdir_elf64btsmip)"
 eelf64ltsmip.c: $(srcdir)/emulparams/elf64ltsmip.sh \
+  $(srcdir)/emulparams/elf64btsmip.sh $(srcdir)/emulparams/elf32bmipn32.sh \
   $(srcdir)/emultempl/elf32.em $(srcdir)/scripttempl/elf.sc ${GEN_DEPENDS}
 	${GENSCRIPTS} elf64ltsmip "$(tdir_elf64ltsmip)"
 eelf_i386.c: $(srcdir)/emulparams/elf_i386.sh \
@@ -591,9 +609,11 @@ eh8300elf.c: $(srcdir)/emulparams/h8300elf.sh \
   $(srcdir)/emultempl/elf32.em $(srcdir)/scripttempl/elf.sc ${GEN_DEPENDS}
 	${GENSCRIPTS} h8300elf "$(tdir_h8300elf)"
 eh8300helf.c: $(srcdir)/emulparams/h8300helf.sh \
+  $(srcdir)/emulparams/h8300elf.sh \
   $(srcdir)/emultempl/elf32.em $(srcdir)/scripttempl/elf.sc ${GEN_DEPENDS}
 	${GENSCRIPTS} h8300helf "$(tdir_h8300helf)"
 eh8300self.c: $(srcdir)/emulparams/h8300self.sh \
+  $(srcdir)/emulparams/h8300elf.sh \
   $(srcdir)/emultempl/elf32.em $(srcdir)/scripttempl/elf.sc ${GEN_DEPENDS}
 	${GENSCRIPTS} h8300self "$(tdir_h8300self)"
 eh8500.c: $(srcdir)/emulparams/h8500.sh \
@@ -741,6 +761,7 @@ emipspe.c: $(srcdir)/emulparams/mipspe.sh \
   $(srcdir)/emultempl/pe.em $(srcdir)/scripttempl/pe.sc ${GEN_DEPENDS}
 	${GENSCRIPTS} mipspe "$(tdir_mips)"
 emn10300.c: $(srcdir)/emulparams/mn10300.sh \
+  $(srcdir)/emulparams/mn10200.sh \
   $(srcdir)/emultempl/elf32.em $(srcdir)/scripttempl/elf.sc ${GEN_DEPENDS}
 	${GENSCRIPTS} mn10300 "$(tdir_mn10300)"
 emn10200.c: $(srcdir)/emulparams/mn10200.sh \
@@ -786,15 +807,18 @@ eshelf.c: $(srcdir)/emulparams/shelf.sh \
   $(srcdir)/emultempl/elf32.em $(srcdir)/scripttempl/elf.sc ${GEN_DEPENDS}
 	${GENSCRIPTS} shelf "$(tdir_shelf)"
 eshelf_linux.c: $(srcdir)/emulparams/shelf_linux.sh \
+  $(srcdir)/emulparams/shlelf_linux.sh \
   $(srcdir)/emultempl/elf32.em $(srcdir)/scripttempl/elf.sc ${GEN_DEPENDS}
 	${GENSCRIPTS} shelf_linux "$(tdir_shelf_linux)"
 eshlelf_linux.c: $(srcdir)/emulparams/shlelf_linux.sh \
   $(srcdir)/emultempl/elf32.em $(srcdir)/scripttempl/elf.sc ${GEN_DEPENDS}
 	${GENSCRIPTS} shlelf_linux "$(tdir_shlelf_linux)"
 eshlelf.c: $(srcdir)/emulparams/shlelf.sh \
+  $(srcdir)/emulparams/shelf.sh \
   $(srcdir)/emultempl/elf32.em $(srcdir)/scripttempl/elf.sc ${GEN_DEPENDS}
 	${GENSCRIPTS} shlelf "$(tdir_shlelf)"
 eshl.c: $(srcdir)/emulparams/shl.sh \
+  $(srcdir)/emulparams/sh.sh \
   $(srcdir)/emultempl/generic.em $(srcdir)/scripttempl/sh.sc ${GEN_DEPENDS}
 	${GENSCRIPTS} shl "$(tdir_shl)"
 eshpe.c: $(srcdir)/emulparams/shpe.sh \
@@ -982,8 +1006,7 @@ ld.1: $(srcdir)/ld.texinfo
 MAINTAINERCLEANFILES = ldver.texi
 
 # We want to reconfigure if configure.host or configure.tgt changes.
-config.status: $(srcdir)/configure $(srcdir)/configure.host $(srcdir)/configure.tgt
-	$(SHELL) ./config.status --recheck
+CONFIG_STATUS_DEPENDENCIES = $(srcdir)/configure.host $(srcdir)/configure.tgt
 
 MOSTLYCLEANFILES = $(STAGESTUFF) ld1$(EXEEXT) ld2$(EXEEXT) ld3$(EXEEXT) \
 	ldemul-list.h crtbegin.o crtend.o ld.log ld.sum
diff --git a/ld/Makefile.in b/ld/Makefile.in
index 069dd3c..b16c0a4 100644
--- a/ld/Makefile.in
+++ b/ld/Makefile.in
@@ -1,6 +1,7 @@
-# Makefile.in generated automatically by automake 1.4-p5 from Makefile.am
+# Makefile.in generated automatically by automake 1.5 from Makefile.am.
 
-# Copyright (C) 1994, 1995-8, 1999, 2001 Free Software Foundation, Inc.
+# Copyright 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001
+# Free Software Foundation, Inc.
 # This Makefile.in is free software; the Free Software Foundation
 # gives unlimited permission to copy and/or distribute it,
 # with or without modifications, as long as this notice is preserved.
@@ -10,6 +11,7 @@
 # even the implied warranty of MERCHANTABILITY or FITNESS FOR A
 # PARTICULAR PURPOSE.
 
+@SET_MAKE@
 
 SHELL = @SHELL@
 
@@ -31,13 +33,9 @@ infodir = @infodir@
 mandir = @mandir@
 includedir = @includedir@
 oldincludedir = /usr/include
-
-DESTDIR =
-
 pkgdatadir = $(datadir)/@PACKAGE@
 pkglibdir = $(libdir)/@PACKAGE@
 pkgincludedir = $(includedir)/@PACKAGE@
-
 top_builddir = .
 
 ACLOCAL = @ACLOCAL@
@@ -46,11 +44,11 @@ AUTOMAKE = @AUTOMAKE@
 AUTOHEADER = @AUTOHEADER@
 
 INSTALL = @INSTALL@
-INSTALL_PROGRAM = @INSTALL_PROGRAM@ $(AM_INSTALL_PROGRAM_FLAGS)
+INSTALL_PROGRAM = @INSTALL_PROGRAM@
 INSTALL_DATA = @INSTALL_DATA@
 INSTALL_SCRIPT = @INSTALL_SCRIPT@
+INSTALL_HEADER = $(INSTALL_DATA)
 transform = @program_transform_name@
-
 NORMAL_INSTALL = :
 PRE_INSTALL = :
 POST_INSTALL = :
@@ -72,7 +70,6 @@ CXXCPP = @CXXCPP@
 DATADIRNAME = @DATADIRNAME@
 DLLTOOL = @DLLTOOL@
 EMULATION_LIBPATH = @EMULATION_LIBPATH@
-EXEEXT = @EXEEXT@
 EXEEXT_FOR_BUILD = @EXEEXT_FOR_BUILD@
 GCJ = @GCJ@
 GCJFLAGS = @GCJFLAGS@
@@ -88,7 +85,6 @@ INTLOBJS = @INTLOBJS@
 LIBTOOL = @LIBTOOL@
 LN_S = @LN_S@
 MAINT = @MAINT@
-MAKEINFO = @MAKEINFO@
 MKINSTALLDIRS = @MKINSTALLDIRS@
 MSGFMT = @MSGFMT@
 NATIVE_LIB_DIRS = @NATIVE_LIB_DIRS@
@@ -105,19 +101,32 @@ USE_NLS = @USE_NLS@
 VERSION = @VERSION@
 l = @l@
 
+CXX = gcc
+
+EMUL = @EMUL@
+EMULATION_OFILES = @EMULATION_OFILES@
+EMUL_EXTRA_OFILES = @EMUL_EXTRA_OFILES@
+
+#stuff for self hosting (can be overridden in config file).
+HOSTING_CRT0 = @HOSTING_CRT0@
+HOSTING_LIBS = @HOSTING_LIBS@
+
 INTLLIBS = @INTLLIBS@
+LEX = `if [ -f ../flex/flex ]; then echo ../flex/flex; else echo @LEX@; fi`
+
+# This is the real libbfd.a created by libtool.
+TESTBFDLIB = @TESTBFDLIB@
+
+WARN_CFLAGS = @WARN_CFLAGS@
+
+YACC = `if [ -f ../bison/bison ]; then echo ../bison/bison -y -L$(srcdir)/../bison/; else echo @YACC@; fi`
 
 AUTOMAKE_OPTIONS = cygnus dejagnu
 
 SUBDIRS = po
 
 tooldir = $(exec_prefix)/$(target_alias)
-
-YACC = `if [ -f ../bison/bison ]; then echo ../bison/bison -y -L$(srcdir)/../bison/; else echo @YACC@; fi`
 YFLAGS = -d
-LEX = `if [ -f ../flex/flex ]; then echo ../flex/flex; else echo @LEX@; fi`
-
-WARN_CFLAGS = @WARN_CFLAGS@
 AM_CFLAGS = $(WARN_CFLAGS)
 
 # We put the scripts in the directory $(scriptdir)/ldscripts.
@@ -125,10 +134,6 @@ AM_CFLAGS = $(WARN_CFLAGS)
 # directives need to be different for native and cross linkers.
 scriptdir = $(tooldir)/lib
 
-EMUL = @EMUL@
-EMULATION_OFILES = @EMULATION_OFILES@
-EMUL_EXTRA_OFILES = @EMUL_EXTRA_OFILES@
-
 # Search path to override the default search path for -lfoo libraries.
 # If LIB_PATH is empty, the ones in the script (if any) are left alone.
 # (The default is usually /lib:/usr/lib:/usr/local/lib, unless building
@@ -153,9 +158,6 @@ TEXI2POD = perl $(BASEDIR)/etc/texi2pod.pl
 POD2MAN = pod2man --center="GNU Development Tools" \
 	--release="binutils-$(VERSION)" --section=1
 
-#stuff for self hosting (can be overridden in config file).
-HOSTING_CRT0 = @HOSTING_CRT0@
-HOSTING_LIBS = @HOSTING_LIBS@
 HOSTING_EMU = -m $(EMUL)
 
 # Setup the testing framework, if you have one
@@ -186,8 +188,6 @@ CC_FOR_TARGET = ` \
     fi; \
   fi`
 
-
-CXX = gcc
 CXX_FOR_TARGET = ` \
   if [ -f $$r/../gcc/xgcc ] ; then \
     if [ -f $$r/../newlib/Makefile ] ; then \
@@ -414,8 +414,8 @@ EMULATION_FILES = emultempl/pe.em emultempl/armcoff.em
 
 POTFILES = $(CFILES) $(HFILES) $(EMULATION_FILES)
 
-# These all start with e so 'make clean' can find them.
 
+# These all start with e so 'make clean' can find them.
 GENSCRIPTS = $(SHELL) $(srcdir)/genscripts.sh ${srcdir} ${libdir} "${exec_prefix}" @host@ @target@ @target_alias@ "@EMULATION_LIBPATH@" "@NATIVE_LIB_DIRS@"
 GEN_DEPENDS = $(srcdir)/genscripts.sh stringify.sed
 
@@ -428,11 +428,11 @@ ld_new_SOURCES = ldgram.y ldlex.l lexsup.c ldlang.c mri.c ldctor.c ldmain.c \
 ld_new_DEPENDENCIES = $(EMULATION_OFILES) $(EMUL_EXTRA_OFILES) $(BFDLIB) $(LIBIBERTY) $(INTLDEPS)
 ld_new_LDADD = $(EMULATION_OFILES) $(EMUL_EXTRA_OFILES) $(BFDLIB) $(LIBIBERTY) $(INTLLIBS)
 
-# This is the real libbfd.a created by libtool.
-TESTBFDLIB = @TESTBFDLIB@
-
 MAINTAINERCLEANFILES = ldver.texi
 
+# We want to reconfigure if configure.host or configure.tgt changes.
+CONFIG_STATUS_DEPENDENCIES = $(srcdir)/configure.host $(srcdir)/configure.tgt
+
 MOSTLYCLEANFILES = $(STAGESTUFF) ld1$(EXEEXT) ld2$(EXEEXT) ld3$(EXEEXT) \
 	ldemul-list.h crtbegin.o crtend.o ld.log ld.sum
 
@@ -443,260 +443,206 @@ CLEANFILES = dep.sed DEP DEPA DEP1 DEP2
 EXTRA_DIST = ldgram.c ldgram.h ldlex.c $(man_MANS)
 
 DISTCLEANFILES = tdirs site.exp site.bak stringify.sed
+subdir = .
 ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
 mkinstalldirs = $(SHELL) $(top_srcdir)/../mkinstalldirs
 CONFIG_HEADER = config.h
-CONFIG_CLEAN_FILES = 
-noinst_PROGRAMS =  ld-new$(EXEEXT)
-PROGRAMS =  $(noinst_PROGRAMS)
-
-
-DEFS = @DEFS@ -I. -I$(srcdir) -I.
+CONFIG_CLEAN_FILES = po/Makefile.in
+noinst_PROGRAMS = ld-new$(EXEEXT)
+PROGRAMS = $(noinst_PROGRAMS)
+
+am_ld_new_OBJECTS = ldgram.$(OBJEXT) ldlex.$(OBJEXT) lexsup.$(OBJEXT) \
+	ldlang.$(OBJEXT) mri.$(OBJEXT) ldctor.$(OBJEXT) \
+	ldmain.$(OBJEXT) ldwrite.$(OBJEXT) ldexp.$(OBJEXT) \
+	ldemul.$(OBJEXT) ldver.$(OBJEXT) ldmisc.$(OBJEXT) \
+	ldfile.$(OBJEXT) ldcref.$(OBJEXT)
+ld_new_OBJECTS = $(am_ld_new_OBJECTS)
+ld_new_LDFLAGS =
+
+DEFS = @DEFS@
+DEFAULT_INCLUDES =  -I. -I$(srcdir) -I.
 CPPFLAGS = @CPPFLAGS@
 LDFLAGS = @LDFLAGS@
 LIBS = @LIBS@
-ld_new_OBJECTS =  ldgram.$(OBJEXT) ldlex.$(OBJEXT) lexsup.$(OBJEXT) \
-ldlang.$(OBJEXT) mri.$(OBJEXT) ldctor.$(OBJEXT) ldmain.$(OBJEXT) \
-ldwrite.$(OBJEXT) ldexp.$(OBJEXT) ldemul.$(OBJEXT) ldver.$(OBJEXT) \
-ldmisc.$(OBJEXT) ldfile.$(OBJEXT) ldcref.$(OBJEXT)
-ld_new_LDFLAGS = 
-LEX_OUTPUT_ROOT = @LEX_OUTPUT_ROOT@
-LEXLIB = @LEXLIB@
-YLWRAP = $(top_srcdir)/../ylwrap
-CFLAGS = @CFLAGS@
-COMPILE = $(CC) $(DEFS) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS)
-LTCOMPILE = $(LIBTOOL) --mode=compile $(CC) $(DEFS) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS)
+depcomp =
+COMPILE = $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) \
+	$(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS)
+LTCOMPILE = $(LIBTOOL) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) \
+	$(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS)
 CCLD = $(CC)
-LINK = $(LIBTOOL) --mode=link $(CCLD) $(AM_CFLAGS) $(CFLAGS) $(LDFLAGS) -o $@
-TEXI2DVI = `if test -f $(top_srcdir)/../texinfo/util/texi2dvi; then echo $(top_srcdir)/../texinfo/util/texi2dvi; else echo texi2dvi; fi`
+LINK = $(LIBTOOL) --mode=link $(CCLD) $(AM_CFLAGS) $(CFLAGS) \
+	$(AM_LDFLAGS) $(LDFLAGS) -o $@
+CFLAGS = @CFLAGS@
+LEXCOMPILE = $(LEX) $(LFLAGS) $(AM_LFLAGS)
+LTLEXCOMPILE = $(LIBTOOL) --mode=compile $(LEX) $(LFLAGS) $(AM_LFLAGS)
+YACCCOMPILE = $(YACC) $(YFLAGS) $(AM_YFLAGS)
+LTYACCCOMPILE = $(LIBTOOL) --mode=compile $(YACC) $(YFLAGS) $(AM_YFLAGS)
+YLWRAP = $(top_srcdir)/ylwrap
+DIST_SOURCES = $(ld_new_SOURCES) $(EXTRA_ld_new_SOURCES)
 TEXINFO_TEX = $(top_srcdir)/../texinfo/texinfo.tex
 INFO_DEPS = ld.info
 DVIS = ld.dvi
 TEXINFOS = ld.texinfo
-man1dir = $(mandir)/man1
-MANS = $(man_MANS)
 
 NROFF = nroff
-DIST_COMMON =  README ./stamp-h.in ChangeLog Makefile.am Makefile.in \
-NEWS TODO acinclude.m4 aclocal.m4 config.in configure configure.in \
-deffilep.c ldgram.c ldlex.c
-
-
-DISTFILES = $(DIST_COMMON) $(SOURCES) $(HEADERS) $(TEXINFOS) $(EXTRA_DIST)
+MANS = $(man_MANS)
 
-TAR = gtar
-GZIP_ENV = --best
+RECURSIVE_TARGETS = info-recursive dvi-recursive \
+	uninstall-info-recursive all-recursive install-data-recursive \
+	install-exec-recursive installdirs-recursive install-recursive \
+	uninstall-recursive check-recursive installcheck-recursive
 SOURCES = $(ld_new_SOURCES) $(EXTRA_ld_new_SOURCES)
-OBJECTS = $(ld_new_OBJECTS)
 
-all: all-redirect
+all: config.h
+	$(MAKE) $(AM_MAKEFLAGS) all-recursive
+
 .SUFFIXES:
-.SUFFIXES: .S .c .dvi .info .l .lo .o .obj .ps .s .texi .texinfo .txi .y
-$(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ Makefile.am $(top_srcdir)/configure.in $(ACLOCAL_M4) 
-	cd $(top_srcdir) && $(AUTOMAKE) --cygnus Makefile
+.SUFFIXES: .c .dvi .info .l .lo .o .obj .ps .texinfo .y
 
-Makefile: $(srcdir)/Makefile.in  $(top_builddir)/config.status
-	cd $(top_builddir) \
-	  && CONFIG_FILES=$@ CONFIG_HEADERS= $(SHELL) ./config.status
+mostlyclean-libtool:
+	-rm -f *.lo
+
+clean-libtool:
+	-rm -rf .libs _libs
+
+distclean-libtool:
+	-rm -f libtool
+$(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ Makefile.am  $(top_srcdir)/configure.in $(ACLOCAL_M4)
+	cd $(top_srcdir) && \
+	  $(AUTOMAKE) --cygnus  Makefile
 
-$(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ configure.in  acinclude.m4
-	cd $(srcdir) && $(ACLOCAL)
-$(srcdir)/configure: @MAINTAINER_MODE_TRUE@$(srcdir)/configure.in $(ACLOCAL_M4) $(CONFIGURE_DEPENDENCIES)
+$(top_builddir)/config.status: $(srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
+	$(SHELL) ./config.status --recheck
+$(srcdir)/configure: @MAINTAINER_MODE_TRUE@ $(srcdir)/configure.in $(ACLOCAL_M4) $(CONFIGURE_DEPENDENCIES)
 	cd $(srcdir) && $(AUTOCONF)
 
+$(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ configure.in acinclude.m4
+	cd $(srcdir) && $(ACLOCAL) $(ACLOCAL_AMFLAGS)
 config.h: stamp-h
 	@if test ! -f $@; then \
 		rm -f stamp-h; \
 		$(MAKE) stamp-h; \
 	else :; fi
 stamp-h: $(srcdir)/config.in $(top_builddir)/config.status
+	@rm -f stamp-h stamp-hT
+	@echo timestamp > stamp-hT 2> /dev/null
 	cd $(top_builddir) \
 	  && CONFIG_FILES= CONFIG_HEADERS=config.h:config.in \
 	     $(SHELL) ./config.status
-	@echo timestamp > stamp-h 2> /dev/null
-$(srcdir)/config.in: @MAINTAINER_MODE_TRUE@$(srcdir)/stamp-h.in
+	@mv stamp-hT stamp-h
+$(srcdir)/config.in: @MAINTAINER_MODE_TRUE@ $(srcdir)/./stamp-h.in
 	@if test ! -f $@; then \
-		rm -f $(srcdir)/stamp-h.in; \
-		$(MAKE) $(srcdir)/stamp-h.in; \
+		rm -f $(srcdir)/./stamp-h.in; \
+		$(MAKE) $(srcdir)/./stamp-h.in; \
 	else :; fi
-$(srcdir)/stamp-h.in: $(top_srcdir)/configure.in $(ACLOCAL_M4) 
+$(srcdir)/./stamp-h.in: $(top_srcdir)/configure.in $(ACLOCAL_M4) 
+	@rm -f $(srcdir)/./stamp-h.in $(srcdir)/./stamp-h.inT
+	@echo timestamp > $(srcdir)/./stamp-h.inT 2> /dev/null
 	cd $(top_srcdir) && $(AUTOHEADER)
-	@echo timestamp > $(srcdir)/stamp-h.in 2> /dev/null
-
-mostlyclean-hdr:
-
-clean-hdr:
+	@mv $(srcdir)/./stamp-h.inT $(srcdir)/./stamp-h.in
 
 distclean-hdr:
 	-rm -f config.h
-
-maintainer-clean-hdr:
-
-mostlyclean-noinstPROGRAMS:
+po/Makefile.in: $(top_builddir)/config.status $(top_srcdir)/po/Make-in
+	cd $(top_builddir) && CONFIG_FILES=$@:po/Make-in CONFIG_HEADERS= CONFIG_LINKS= $(SHELL) ./config.status
 
 clean-noinstPROGRAMS:
 	-test -z "$(noinst_PROGRAMS)" || rm -f $(noinst_PROGRAMS)
+ldgram.h: ldgram.c
+deffilep.h: deffilep.c
+ld-new$(EXEEXT): $(ld_new_OBJECTS) $(ld_new_DEPENDENCIES) 
+	@rm -f ld-new$(EXEEXT)
+	$(LINK) $(ld_new_LDFLAGS) $(ld_new_OBJECTS) $(ld_new_LDADD) $(LIBS)
 
-distclean-noinstPROGRAMS:
+mostlyclean-compile:
+	-rm -f *.$(OBJEXT) core *.core
 
-maintainer-clean-noinstPROGRAMS:
+distclean-compile:
+	-rm -f *.tab.c
 
 .c.o:
-	$(COMPILE) -c $<
+	$(COMPILE) -c `test -f $< || echo '$(srcdir)/'`$<
 
-# FIXME: We should only use cygpath when building on Windows,
-# and only if it is available.
 .c.obj:
 	$(COMPILE) -c `cygpath -w $<`
 
-.s.o:
-	$(COMPILE) -c $<
-
-.S.o:
-	$(COMPILE) -c $<
-
-mostlyclean-compile:
-	-rm -f *.o core *.core
-	-rm -f *.$(OBJEXT)
-
-clean-compile:
-
-distclean-compile:
-	-rm -f *.tab.c
-
-maintainer-clean-compile:
-
 .c.lo:
-	$(LIBTOOL) --mode=compile $(COMPILE) -c $<
-
-.s.lo:
-	$(LIBTOOL) --mode=compile $(COMPILE) -c $<
-
-.S.lo:
-	$(LIBTOOL) --mode=compile $(COMPILE) -c $<
-
-mostlyclean-libtool:
-	-rm -f *.lo
-
-clean-libtool:
-	-rm -rf .libs _libs
-
-distclean-libtool:
+	$(LTCOMPILE) -c -o $@ `test -f $< || echo '$(srcdir)/'`$<
 
-maintainer-clean-libtool:
+LEX_OUTPUT_ROOT = @LEX_OUTPUT_ROOT@
+LEXLIB = @LEXLIB@
 
-ld-new$(EXEEXT): $(ld_new_OBJECTS) $(ld_new_DEPENDENCIES)
-	@rm -f ld-new$(EXEEXT)
-	$(LINK) $(ld_new_LDFLAGS) $(ld_new_OBJECTS) $(ld_new_LDADD) $(LIBS)
 .l.c:
-	$(LEX) $(AM_LFLAGS) $(LFLAGS) $< && mv $(LEX_OUTPUT_ROOT).c $@
-.y.c:
-	$(SHELL) $(YLWRAP) "$(YACC)" $< y.tab.c $*.c y.tab.h $*.h -- $(AM_YFLAGS) $(YFLAGS)
-deffilep.h: deffilep.c
-ldgram.h: ldgram.c
+	$(LEXCOMPILE) $< && mv $(LEX_OUTPUT_ROOT).c $@
 
+.y.c:
+	$(SHELL) $(YLWRAP) $< y.tab.c $@ y.tab.h $*.h -- $(YACCCOMPILE)
 
 ld.info: ld.texinfo
 ld.dvi: ld.texinfo
 
-
-DVIPS = dvips
-
-.texi.info:
-	@rm -f $@ $@-[0-9] $@-[0-9][0-9]
-	$(MAKEINFO) -I $(srcdir) $<
-
-.texi.dvi:
-	TEXINPUTS=$(top_srcdir)/../texinfo/texinfo.tex:$$TEXINPUTS \
-	  MAKEINFO='$(MAKEINFO) -I $(srcdir)' $(TEXI2DVI) $<
-
-.texi:
-	@rm -f $@ $@-[0-9] $@-[0-9][0-9]
-	$(MAKEINFO) -I $(srcdir) $<
-
 .texinfo.info:
 	@rm -f $@ $@-[0-9] $@-[0-9][0-9]
-	$(MAKEINFO) -I $(srcdir) $<
-
-.texinfo:
-	@rm -f $@ $@-[0-9] $@-[0-9][0-9]
-	$(MAKEINFO) -I $(srcdir) $<
+	$(MAKEINFO) $(AM_MAKEINFOFLAGS) $(MAKEINFOFLAGS) \
+	  -I $(srcdir) $<
 
 .texinfo.dvi:
-	TEXINPUTS=$(top_srcdir)/../texinfo/texinfo.tex:$$TEXINPUTS \
-	  MAKEINFO='$(MAKEINFO) -I $(srcdir)' $(TEXI2DVI) $<
-
-.txi.info:
-	@rm -f $@ $@-[0-9] $@-[0-9][0-9]
-	$(MAKEINFO) -I $(srcdir) $<
-
-.txi.dvi:
-	TEXINPUTS=$(top_srcdir)/../texinfo/texinfo.tex:$$TEXINPUTS \
-	  MAKEINFO='$(MAKEINFO) -I $(srcdir)' $(TEXI2DVI) $<
+	TEXINPUTS=$(top_srcdir)/../texinfo:$$TEXINPUTS \
+	MAKEINFO='$(MAKEINFO) $(AM_MAKEINFOFLAGS) $(MAKEINFOFLAGS) -I $(srcdir)' \
+	$(TEXI2DVI) $<
 
-.txi:
+.texinfo:
 	@rm -f $@ $@-[0-9] $@-[0-9][0-9]
-	$(MAKEINFO) -I $(srcdir) $<
+	$(MAKEINFO) $(AM_MAKEINFOFLAGS) $(MAKEINFOFLAGS) \
+	  -I $(srcdir) $<
+
+MAKEINFO = `if test -f $(top_builddir)/../texinfo/makeinfo/makeinfo; then \
+            echo $(top_builddir)/../texinfo/makeinfo/makeinfo; \
+          else \
+            echo makeinfo; \
+          fi`
+
+TEXI2DVI = `if test -f $(top_srcdir)/../texinfo/util/texi2dvi; then \
+             echo $(top_srcdir)/../texinfo/util/texi2dvi; \
+           else \
+             echo texi2dvi; \
+           fi`
+DVIPS = dvips
 .dvi.ps:
 	$(DVIPS) $< -o $@
 
-install-info-am: $(INFO_DEPS)
-	@$(NORMAL_INSTALL)
-	$(mkinstalldirs) $(DESTDIR)$(infodir)
-	@list='$(INFO_DEPS)'; \
-	for file in $$list; do \
-	  if test -f $$file; then d=.; else d=$(srcdir); fi; \
-	  for ifile in `cd $$d && echo $$file $$file-[0-9] $$file-[0-9][0-9]`; do \
-	    if test -f $$d/$$ifile; then \
-	      echo " $(INSTALL_DATA) $$d/$$ifile $(DESTDIR)$(infodir)/$$ifile"; \
-	      $(INSTALL_DATA) $$d/$$ifile $(DESTDIR)$(infodir)/$$ifile; \
-	    else : ; fi; \
-	  done; \
-	done
-	@$(POST_INSTALL)
-	@if $(SHELL) -c 'install-info --version | sed 1q | fgrep -s -v -i debian' >/dev/null 2>&1; then \
+uninstall-info-am:
+	$(PRE_UNINSTALL)
+	@if (install-info --version && \
+	     install-info --version | fgrep -i -v debian) >/dev/null 2>&1; then \
 	  list='$(INFO_DEPS)'; \
 	  for file in $$list; do \
-	    echo " install-info --info-dir=$(DESTDIR)$(infodir) $(DESTDIR)$(infodir)/$$file";\
-	    install-info --info-dir=$(DESTDIR)$(infodir) $(DESTDIR)$(infodir)/$$file || :;\
+	    echo " install-info --info-dir=$(DESTDIR)$(infodir) --remove $(DESTDIR)$(infodir)/$$file"; \
+	    install-info --info-dir=$(DESTDIR)$(infodir) --remove $(DESTDIR)$(infodir)/$$file; \
 	  done; \
-	else : ; fi
-
-uninstall-info:
-	$(PRE_UNINSTALL)
-	@if $(SHELL) -c 'install-info --version | sed 1q | fgrep -s -v -i debian' >/dev/null 2>&1; then \
-	  ii=yes; \
-	else ii=; fi; \
-	list='$(INFO_DEPS)'; \
-	for file in $$list; do \
-	  test -z "$$ii" \
-	    || install-info --info-dir=$(DESTDIR)$(infodir) --remove $$file; \
-	done
+	else :; fi
 	@$(NORMAL_UNINSTALL)
-	list='$(INFO_DEPS)'; \
+	@list='$(INFO_DEPS)'; \
 	for file in $$list; do \
-	  (cd $(DESTDIR)$(infodir) && rm -f $$file $$file-[0-9] $$file-[0-9][0-9]); \
+	  (if cd $(DESTDIR)$(infodir); then \
+	     echo " rm -f $$file $$file-[0-9] $$file-[0-9][0-9])"; \
+	     rm -f $$file $$file-[0-9] $$file-[0-9][0-9]; \
+	   else :; fi); \
 	done
 
 dist-info: $(INFO_DEPS)
 	list='$(INFO_DEPS)'; \
 	for base in $$list; do \
 	  if test -f $$base; then d=.; else d=$(srcdir); fi; \
-	  for file in `cd $$d && eval echo $$base*`; do \
+	  for file in `CDPATH=: && cd $$d && eval echo $$base*`; do \
 	    test -f $(distdir)/$$file \
-	    || ln $$d/$$file $(distdir)/$$file 2> /dev/null \
 	    || cp -p $$d/$$file $(distdir)/$$file; \
 	  done; \
 	done
 
 mostlyclean-aminfo:
-	-rm -f ld.aux ld.cp ld.cps ld.dvi ld.fn ld.fns ld.ky ld.kys ld.ps \
-	  ld.log ld.pg ld.toc ld.tp ld.tps ld.vr ld.vrs ld.op ld.tr \
-	  ld.cv ld.cn
-
-clean-aminfo:
-
-distclean-aminfo:
+	-rm -f ld.aux ld.cp ld.cps ld.dvi ld.fn ld.ky ld.log ld.pg ld.ps ld.toc ld.tp \
+	  ld.vr
 
 maintainer-clean-aminfo:
 	for i in $(INFO_DEPS); do \
@@ -705,12 +651,16 @@ maintainer-clean-aminfo:
 	    rm -f $$i-[0-9]*; \
 	  fi; \
 	done
+
 clean-info: mostlyclean-aminfo
 
-install-man1:
+man1dir = $(mandir)/man1
+install-man1: $(man1_MANS) $(man_MANS)
+	@$(NORMAL_INSTALL)
 	$(mkinstalldirs) $(DESTDIR)$(man1dir)
-	@list='$(man1_MANS)'; \
-	l2='$(man_MANS)'; for i in $$l2; do \
+	@list='$(man1_MANS) $(dist_man1_MANS) $(nodist_man1_MANS)'; \
+	l2='$(man_MANS) $(dist_man_MANS) $(nodist_man_MANS)'; \
+	for i in $$l2; do \
 	  case "$$i" in \
 	    *.1*) list="$$list $$i" ;; \
 	  esac; \
@@ -720,14 +670,16 @@ install-man1:
 	  else file=$$i; fi; \
 	  ext=`echo $$i | sed -e 's/^.*\\.//'`; \
 	  inst=`echo $$i | sed -e 's/\\.[0-9a-z]*$$//'`; \
+	  inst=`echo $$inst | sed -e 's/^.*\///'`; \
 	  inst=`echo $$inst | sed '$(transform)'`.$$ext; \
 	  echo " $(INSTALL_DATA) $$file $(DESTDIR)$(man1dir)/$$inst"; \
 	  $(INSTALL_DATA) $$file $(DESTDIR)$(man1dir)/$$inst; \
 	done
-
 uninstall-man1:
-	@list='$(man1_MANS)'; \
-	l2='$(man_MANS)'; for i in $$l2; do \
+	@$(NORMAL_UNINSTALL)
+	@list='$(man1_MANS) $(dist_man1_MANS) $(nodist_man1_MANS)'; \
+	l2='$(man_MANS) $(dist_man_MANS) $(nodist_man_MANS)'; \
+	for i in $$l2; do \
 	  case "$$i" in \
 	    *.1*) list="$$list $$i" ;; \
 	  esac; \
@@ -735,16 +687,11 @@ uninstall-man1:
 	for i in $$list; do \
 	  ext=`echo $$i | sed -e 's/^.*\\.//'`; \
 	  inst=`echo $$i | sed -e 's/\\.[0-9a-z]*$$//'`; \
+	  inst=`echo $$inst | sed -e 's/^.*\///'`; \
 	  inst=`echo $$inst | sed '$(transform)'`.$$ext; \
 	  echo " rm -f $(DESTDIR)$(man1dir)/$$inst"; \
 	  rm -f $(DESTDIR)$(man1dir)/$$inst; \
 	done
-install-man: $(MANS)
-	@$(NORMAL_INSTALL)
-	$(MAKE) $(AM_MAKEFLAGS) install-man1
-uninstall-man:
-	@$(NORMAL_UNINSTALL)
-	$(MAKE) $(AM_MAKEFLAGS) uninstall-man1
 
 # This directory's subdirectories are mostly independent; you can cd
 # into them and run `make' without going through this Makefile.
@@ -752,12 +699,7 @@ uninstall-man:
 # (1) if the variable is set in `config.status', edit `config.status'
 #     (which will cause the Makefiles to be regenerated when you run `make');
 # (2) otherwise, pass the desired values on the `make' command line.
-
-@SET_MAKE@
-
-all-recursive install-data-recursive install-exec-recursive \
-installdirs-recursive install-recursive uninstall-recursive install-info-recursive \
-check-recursive installcheck-recursive info-recursive dvi-recursive:
+$(RECURSIVE_TARGETS):
 	@set fnord $(MAKEFLAGS); amf=$$2; \
 	dot_seen=no; \
 	target=`echo $@ | sed s/-recursive//`; \
@@ -780,11 +722,16 @@ mostlyclean-recursive clean-recursive distclean-recursive \
 maintainer-clean-recursive:
 	@set fnord $(MAKEFLAGS); amf=$$2; \
 	dot_seen=no; \
-	rev=''; list='$(SUBDIRS)'; for subdir in $$list; do \
-	  rev="$$subdir $$rev"; \
-	  test "$$subdir" != "." || dot_seen=yes; \
+	case "$@" in \
+	  distclean-* | maintainer-clean-*) list='$(DIST_SUBDIRS)' ;; \
+	  *) list='$(SUBDIRS)' ;; \
+	esac; \
+	rev=''; for subdir in $$list; do \
+	  if test "$$subdir" = "."; then :; else \
+	    rev="$$subdir $$rev"; \
+	  fi; \
 	done; \
-	test "$$dot_seen" = "no" && rev=". $$rev"; \
+	rev="$$rev ."; \
 	target=`echo $@ | sed s/-recursive//`; \
 	for subdir in $$rev; do \
 	  echo "Making $$target in $$subdir"; \
@@ -803,154 +750,83 @@ tags-recursive:
 
 tags: TAGS
 
-ID: $(HEADERS) $(SOURCES) $(LISP)
-	list='$(SOURCES) $(HEADERS)'; \
-	unique=`for i in $$list; do echo $$i; done | \
-	  awk '    { files[$$0] = 1; } \
+ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES)
+	list='$(SOURCES) $(HEADERS) $(TAGS_FILES)'; \
+	unique=`for i in $$list; do \
+	    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
+	  done | \
+	  $(AWK) '    { files[$$0] = 1; } \
 	       END { for (i in files) print i; }'`; \
-	here=`pwd` && cd $(srcdir) \
-	  && mkid -f$$here/ID $$unique $(LISP)
+	mkid -fID $$unique $(LISP)
 
-TAGS: tags-recursive $(HEADERS) $(SOURCES) config.in $(TAGS_DEPENDENCIES) $(LISP)
+TAGS: tags-recursive $(HEADERS) $(SOURCES) config.in $(TAGS_DEPENDENCIES) \
+		$(TAGS_FILES) $(LISP)
 	tags=; \
 	here=`pwd`; \
 	list='$(SUBDIRS)'; for subdir in $$list; do \
-   if test "$$subdir" = .; then :; else \
+	  if test "$$subdir" = .; then :; else \
 	    test -f $$subdir/TAGS && tags="$$tags -i $$here/$$subdir/TAGS"; \
-   fi; \
+	  fi; \
 	done; \
-	list='$(SOURCES) $(HEADERS)'; \
-	unique=`for i in $$list; do echo $$i; done | \
-	  awk '    { files[$$0] = 1; } \
+	list='$(SOURCES) $(HEADERS) $(TAGS_FILES)'; \
+	unique=`for i in $$list; do \
+	    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
+	  done | \
+	  $(AWK) '    { files[$$0] = 1; } \
 	       END { for (i in files) print i; }'`; \
 	test -z "$(ETAGS_ARGS)config.in$$unique$(LISP)$$tags" \
-	  || (cd $(srcdir) && etags $(ETAGS_ARGS) $$tags config.in $$unique $(LISP) -o $$here/TAGS)
-
-mostlyclean-tags:
+	  || etags $(ETAGS_ARGS) $$tags config.in $$unique $(LISP)
 
-clean-tags:
+GTAGS:
+	here=`CDPATH=: && cd $(top_builddir) && pwd` \
+	  && cd $(top_srcdir) \
+	  && gtags -i $(GTAGS_ARGS) $$here
 
 distclean-tags:
-	-rm -f TAGS ID
-
-maintainer-clean-tags:
-
-distdir = $(PACKAGE)-$(VERSION)
-top_distdir = $(distdir)
-
-# This target untars the dist file and tries a VPATH configuration.  Then
-# it guarantees that the distribution is self-contained by making another
-# tarfile.
-distcheck: dist
-	-rm -rf $(distdir)
-	GZIP=$(GZIP_ENV) $(TAR) zxf $(distdir).tar.gz
-	mkdir $(distdir)/=build
-	mkdir $(distdir)/=inst
-	dc_install_base=`cd $(distdir)/=inst && pwd`; \
-	cd $(distdir)/=build \
-	  && ../configure --srcdir=.. --prefix=$$dc_install_base \
-	  && $(MAKE) $(AM_MAKEFLAGS) \
-	  && $(MAKE) $(AM_MAKEFLAGS) dvi \
-	  && $(MAKE) $(AM_MAKEFLAGS) check \
-	  && $(MAKE) $(AM_MAKEFLAGS) install \
-	  && $(MAKE) $(AM_MAKEFLAGS) installcheck \
-	  && $(MAKE) $(AM_MAKEFLAGS) dist
-	-rm -rf $(distdir)
-	@banner="$(distdir).tar.gz is ready for distribution"; \
-	dashes=`echo "$$banner" | sed s/./=/g`; \
-	echo "$$dashes"; \
-	echo "$$banner"; \
-	echo "$$dashes"
-dist: distdir
-	-chmod -R a+r $(distdir)
-	GZIP=$(GZIP_ENV) $(TAR) chozf $(distdir).tar.gz $(distdir)
-	-rm -rf $(distdir)
-dist-all: distdir
-	-chmod -R a+r $(distdir)
-	GZIP=$(GZIP_ENV) $(TAR) chozf $(distdir).tar.gz $(distdir)
-	-rm -rf $(distdir)
-distdir: $(DISTFILES)
-	-rm -rf $(distdir)
-	mkdir $(distdir)
-	-chmod 777 $(distdir)
-	@for file in $(DISTFILES); do \
-	  if test -f $$file; then d=.; else d=$(srcdir); fi; \
-	  if test -d $$d/$$file; then \
-	    cp -pr $$d/$$file $(distdir)/$$file; \
-	  else \
-	    test -f $(distdir)/$$file \
-	    || ln $$d/$$file $(distdir)/$$file 2> /dev/null \
-	    || cp -p $$d/$$file $(distdir)/$$file || :; \
-	  fi; \
-	done
-	for subdir in $(SUBDIRS); do \
-	  if test "$$subdir" = .; then :; else \
-	    test -d $(distdir)/$$subdir \
-	    || mkdir $(distdir)/$$subdir \
-	    || exit 1; \
-	    chmod 777 $(distdir)/$$subdir; \
-	    (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) top_distdir=../$(distdir) distdir=../$(distdir)/$$subdir distdir) \
-	      || exit 1; \
-	  fi; \
-	done
-	$(MAKE) $(AM_MAKEFLAGS) top_distdir="$(top_distdir)" distdir="$(distdir)" dist-info
-
+	-rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH
 DEJATOOL = $(PACKAGE)
-
-RUNTESTDEFAULTFLAGS = --tool $(DEJATOOL) --srcdir $$srcdir
+RUNTESTDEFAULTFLAGS = --tool $$tool --srcdir $$srcdir
 site.exp: Makefile
 	@echo 'Making a new site.exp file...'
-	@test ! -f site.bak || rm -f site.bak
-	@echo '## these variables are automatically generated by make ##' > $@-t
-	@echo '# Do not edit here.  If you wish to override these values' >> $@-t
-	@echo '# edit the last section' >> $@-t
-	@echo 'set tool $(DEJATOOL)' >> $@-t
-	@echo 'set srcdir $(srcdir)' >> $@-t
-	@echo 'set objdir' `pwd` >> $@-t
-	@echo 'set host_alias $(host_alias)' >> $@-t
-	@echo 'set host_triplet $(host_triplet)' >> $@-t
-	@echo 'set target_alias $(target_alias)' >> $@-t
-	@echo 'set target_triplet $(target_triplet)' >> $@-t
-	@echo 'set build_alias $(build_alias)' >> $@-t
-	@echo 'set build_triplet $(build_triplet)' >> $@-t
-	@echo '## All variables above are generated by configure. Do Not Edit ##' >> $@-t
-	@test ! -f site.exp || sed '1,/^## All variables above are.*##/ d' site.exp >> $@-t
+	@echo '## these variables are automatically generated by make ##' >site.tmp
+	@echo '# Do not edit here.  If you wish to override these values' >>site.tmp
+	@echo '# edit the last section' >>site.tmp
+	@echo 'set tool $(DEJATOOL)' >>site.tmp
+	@echo 'set srcdir $(srcdir)' >>site.tmp
+	@echo "set objdir `pwd`" >>site.tmp
+	@echo 'set build_alias $(build_alias)' >>site.tmp
+	@echo 'set build_triplet $(build_triplet)' >>site.tmp
+	@echo 'set host_alias $(host_alias)' >>site.tmp
+	@echo 'set host_triplet $(host_triplet)' >>site.tmp
+	@echo 'set target_alias $(target_alias)' >>site.tmp
+	@echo 'set target_triplet $(target_triplet)' >>site.tmp
+	@echo '## All variables above are generated by configure. Do Not Edit ##' >>site.tmp
+	@test ! -f site.exp || \
+	  sed '1,/^## All variables above are.*##/ d' site.exp >> site.tmp
+	@-rm -f site.bak
 	@test ! -f site.exp || mv site.exp site.bak
-	@mv $@-t site.exp
-info-am: $(INFO_DEPS)
-info: info-recursive
-dvi-am: $(DVIS)
-dvi: dvi-recursive
+	@mv site.tmp site.exp
 check-am:
 	$(MAKE) $(AM_MAKEFLAGS) check-DEJAGNU
 check: check-recursive
-installcheck-am:
-installcheck: installcheck-recursive
-install-info-am: 
-install-info: install-info-recursive
-all-recursive-am: config.h
-	$(MAKE) $(AM_MAKEFLAGS) all-recursive
+all-am: Makefile $(PROGRAMS) $(MANS) config.h
+installdirs: installdirs-recursive
+installdirs-am:
+	$(mkinstalldirs) $(DESTDIR)$(man1dir)
 
-install-exec-am: install-exec-local
+install: install-recursive
 install-exec: install-exec-recursive
-
-install-data-am: install-man install-data-local
 install-data: install-data-recursive
+uninstall: uninstall-recursive
 
 install-am: all-am
 	@$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
-install: install-recursive
-uninstall-am: uninstall-man
-uninstall: uninstall-recursive
-all-am: Makefile $(PROGRAMS) $(MANS) config.h
-all-redirect: all-recursive-am
-install-strip:
-	$(MAKE) $(AM_MAKEFLAGS) AM_INSTALL_PROGRAM_FLAGS=-s install
-installdirs: installdirs-recursive
-installdirs-am:
-	$(mkinstalldirs)  $(DESTDIR)$(mandir)/man1
-
 
+installcheck: installcheck-recursive
+install-strip:
+	$(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
+	  `test -z '$(STRIP)' || \
+	    echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install
 mostlyclean-generic:
 	-test -z "$(MOSTLYCLEANFILES)" || rm -f $(MOSTLYCLEANFILES)
 
@@ -958,65 +834,98 @@ clean-generic:
 	-test -z "$(CLEANFILES)" || rm -f $(CLEANFILES)
 
 distclean-generic:
-	-rm -f Makefile $(CONFIG_CLEAN_FILES)
-	-rm -f config.cache config.log stamp-h stamp-h[0-9]*
+	-rm -f Makefile $(CONFIG_CLEAN_FILES) stamp-h stamp-h[0-9]*
 	-test -z "$(DISTCLEANFILES)" || rm -f $(DISTCLEANFILES)
 
 maintainer-clean-generic:
-	-test -z "ldlexldeffilephdeffilepcldgramhldgramc$(MAINTAINERCLEANFILES)" || rm -f ldlexl deffileph deffilepc ldgramh ldgramc $(MAINTAINERCLEANFILES)
-mostlyclean-am:  mostlyclean-hdr mostlyclean-noinstPROGRAMS \
-		mostlyclean-compile mostlyclean-libtool \
-		mostlyclean-aminfo mostlyclean-tags mostlyclean-generic \
-		mostlyclean-local
+	@echo "This command is intended for maintainers to use"
+	@echo "it deletes files that may require special tools to rebuild."
+	-test -z "ldgram.hdeffilep.h$(MAINTAINERCLEANFILES)" || rm -f ldgram.h deffilep.h $(MAINTAINERCLEANFILES)
+clean: clean-recursive
 
-mostlyclean: mostlyclean-recursive
+clean-am: clean-generic clean-libtool clean-noinstPROGRAMS \
+	mostlyclean-am
 
-clean-am:  clean-hdr clean-noinstPROGRAMS clean-compile clean-libtool \
-		clean-aminfo clean-tags clean-generic mostlyclean-am
+distclean: distclean-recursive
+	-rm -f config.status config.cache config.log
+distclean-am: clean-am distclean-compile distclean-generic distclean-hdr \
+	distclean-libtool distclean-local distclean-tags
 
-clean: clean-recursive
+dvi: dvi-recursive
 
-distclean-am:  distclean-hdr distclean-noinstPROGRAMS distclean-compile \
-		distclean-libtool distclean-aminfo distclean-tags \
-		distclean-generic clean-am distclean-local
-	-rm -f libtool
+dvi-am: $(DVIS)
 
-distclean: distclean-recursive
-	-rm -f config.status
-
-maintainer-clean-am:  maintainer-clean-hdr \
-		maintainer-clean-noinstPROGRAMS \
-		maintainer-clean-compile maintainer-clean-libtool \
-		maintainer-clean-aminfo maintainer-clean-tags \
-		maintainer-clean-generic distclean-am
-	@echo "This command is intended for maintainers to use;"
-	@echo "it deletes files that may require special tools to rebuild."
+info: info-recursive
+
+info-am: $(INFO_DEPS)
+
+install-data-am: install-data-local install-man
+
+install-exec-am: install-exec-local
+
+install-info:
+
+install-info-am: $(INFO_DEPS)
+	@$(NORMAL_INSTALL)
+	$(mkinstalldirs) $(DESTDIR)$(infodir)
+	@list='$(INFO_DEPS)'; \
+	for file in $$list; do \
+	  if test -f $$file; then d=.; else d=$(srcdir); fi; \
+	  for ifile in `CDPATH=: && cd $$d && echo $$file $$file-[0-9] $$file-[0-9][0-9]`; do \
+	    if test -f $$d/$$ifile; then \
+	      echo " $(INSTALL_DATA) $$d/$$ifile $(DESTDIR)$(infodir)/$$ifile"; \
+	      $(INSTALL_DATA) $$d/$$ifile $(DESTDIR)$(infodir)/$$ifile; \
+	    else : ; fi; \
+	  done; \
+	done
+	@$(POST_INSTALL)
+	@if (install-info --version && \
+	     install-info --version | fgrep -i -v debian) >/dev/null 2>&1; then \
+	  list='$(INFO_DEPS)'; \
+	  for file in $$list; do \
+	    echo " install-info --info-dir=$(DESTDIR)$(infodir) $(DESTDIR)$(infodir)/$$file";\
+	    install-info --info-dir=$(DESTDIR)$(infodir) $(DESTDIR)$(infodir)/$$file || :;\
+	  done; \
+	else : ; fi
+install-man: install-man1
+
+installcheck-am:
 
 maintainer-clean: maintainer-clean-recursive
-	-rm -f config.status
-
-.PHONY: mostlyclean-hdr distclean-hdr clean-hdr maintainer-clean-hdr \
-mostlyclean-noinstPROGRAMS distclean-noinstPROGRAMS \
-clean-noinstPROGRAMS maintainer-clean-noinstPROGRAMS \
-mostlyclean-compile distclean-compile clean-compile \
-maintainer-clean-compile mostlyclean-libtool distclean-libtool \
-clean-libtool maintainer-clean-libtool install-info-am uninstall-info \
-mostlyclean-aminfo distclean-aminfo clean-aminfo \
-maintainer-clean-aminfo install-man1 uninstall-man1 install-man \
-uninstall-man install-data-recursive uninstall-data-recursive \
-install-exec-recursive uninstall-exec-recursive installdirs-recursive \
-uninstalldirs-recursive all-recursive check-recursive \
-installcheck-recursive info-recursive dvi-recursive \
-mostlyclean-recursive distclean-recursive clean-recursive \
-maintainer-clean-recursive tags tags-recursive mostlyclean-tags \
-distclean-tags clean-tags maintainer-clean-tags distdir check-DEJAGNU \
-info-am info dvi-am dvi check check-am installcheck-am installcheck \
-install-info-am install-info all-recursive-am install-exec-local \
-install-exec-am install-exec install-data-local install-data-am \
-install-data install-am install uninstall-am uninstall all-redirect \
-all-am all installdirs-am installdirs mostlyclean-generic \
-distclean-generic clean-generic maintainer-clean-generic clean \
-mostlyclean distclean maintainer-clean
+
+maintainer-clean-am: distclean-am maintainer-clean-aminfo \
+	maintainer-clean-generic
+
+mostlyclean: mostlyclean-recursive
+
+mostlyclean-am: mostlyclean-aminfo mostlyclean-compile \
+	mostlyclean-generic mostlyclean-libtool mostlyclean-local
+
+uninstall-am: uninstall-man
+
+uninstall-info: uninstall-info-recursive
+
+uninstall-man: uninstall-man1
+
+.PHONY: $(RECURSIVE_TARGETS) GTAGS all all-am check check-DEJAGNU \
+	check-am clean clean-generic clean-info clean-libtool \
+	clean-noinstPROGRAMS clean-recursive dist-info distclean \
+	distclean-compile distclean-generic distclean-hdr \
+	distclean-libtool distclean-local distclean-recursive \
+	distclean-tags dvi dvi-am dvi-recursive info info-am \
+	info-recursive install install-am install-data install-data-am \
+	install-data-local install-data-recursive install-exec \
+	install-exec-am install-exec-local install-exec-recursive \
+	install-info install-info-am install-man install-man1 \
+	install-recursive install-strip installcheck installcheck-am \
+	installdirs installdirs-am installdirs-recursive \
+	maintainer-clean maintainer-clean-aminfo \
+	maintainer-clean-generic maintainer-clean-recursive mostlyclean \
+	mostlyclean-aminfo mostlyclean-compile mostlyclean-generic \
+	mostlyclean-libtool mostlyclean-local mostlyclean-recursive \
+	tags tags-recursive uninstall uninstall-am uninstall-info-am \
+	uninstall-info-recursive uninstall-man uninstall-man1 \
+	uninstall-recursive
 
 
 po/POTFILES.in: @MAINT@ Makefile
@@ -1173,42 +1082,53 @@ eelf32_i960.c: $(srcdir)/emulparams/elf32_i960.sh \
   $(srcdir)/emultempl/elf32.em $(srcdir)/scripttempl/elf.sc ${GEN_DEPENDS}
 	${GENSCRIPTS} elf32_i960 "$(tdir_elf32_i960)"
 eelf32b4300.c: $(srcdir)/emulparams/elf32b4300.sh \
+  $(srcdir)/emulparams/elf32bmip.sh \
   $(srcdir)/emultempl/elf32.em $(srcdir)/scripttempl/elf.sc ${GEN_DEPENDS}
 	${GENSCRIPTS} elf32b4300 "$(tdir_elf32b4300)"
 eelf32bmip.c: $(srcdir)/emulparams/elf32bmip.sh \
   $(srcdir)/emultempl/elf32.em $(srcdir)/scripttempl/elf.sc ${GEN_DEPENDS}
 	${GENSCRIPTS} elf32bmip "$(tdir_elf32bmip)"
 eelf32bsmip.c: $(srcdir)/emulparams/elf32bsmip.sh \
+  $(srcdir)/emulparams/elf32bmip.sh \
   $(srcdir)/emultempl/elf32.em $(srcdir)/scripttempl/elf.sc ${GEN_DEPENDS}
 	${GENSCRIPTS} elf32bsmip "$(tdir_elf32bsmip)"
 eelf32btsmip.c: $(srcdir)/emulparams/elf32btsmip.sh \
+  $(srcdir)/emulparams/elf32bmip.sh \
   $(srcdir)/emultempl/elf32.em $(srcdir)/scripttempl/elf.sc ${GEN_DEPENDS}
 	${GENSCRIPTS} elf32btsmip "$(tdir_elf32btsmip)"
 eelf32ltsmip.c: $(srcdir)/emulparams/elf32ltsmip.sh \
+  $(srcdir)/emulparams/elf32btsmip.sh $(srcdir)/emulparams/elf32bmip.sh \
   $(srcdir)/emultempl/elf32.em $(srcdir)/scripttempl/elf.sc ${GEN_DEPENDS}
 	${GENSCRIPTS} elf32ltsmip "$(tdir_elf32ltsmip)"
 eelf32ebmip.c: $(srcdir)/emulparams/elf32ebmip.sh \
+  $(srcdir)/emulparams/elf32bmip.sh \
   $(srcdir)/emultempl/elf32.em $(srcdir)/scripttempl/elf.sc ${GEN_DEPENDS}
 	${GENSCRIPTS} elf32ebmip "$(tdir_elf32ebmip)"
 eelf32elmip.c: $(srcdir)/emulparams/elf32elmip.sh \
+  $(srcdir)/emulparams/elf32lmip.sh $(srcdir)/emulparams/elf32bmip.sh \
   $(srcdir)/emultempl/elf32.em $(srcdir)/scripttempl/elf.sc ${GEN_DEPENDS}
 	${GENSCRIPTS} elf32elmip "$(tdir_elf32elmip)"
 eelf32bmipn32.c: $(srcdir)/emulparams/elf32bmipn32.sh \
   $(srcdir)/emultempl/elf32.em $(srcdir)/scripttempl/elf.sc ${GEN_DEPENDS}
 	${GENSCRIPTS} elf32bmipn32 "$(tdir_elf32bmipn32)"
 eelf32l4300.c: $(srcdir)/emulparams/elf32l4300.sh \
+  $(srcdir)/emulparams/elf32b4300.sh $(srcdir)/emulparams/elf32bmip.sh \
   $(srcdir)/emultempl/elf32.em $(srcdir)/scripttempl/elf.sc ${GEN_DEPENDS}
 	${GENSCRIPTS} elf32l4300 "$(tdir_elf32l4300)"
 eelf32lmip.c: $(srcdir)/emulparams/elf32lmip.sh \
+  $(srcdir)/emulparams/elf32bmip.sh \
   $(srcdir)/emultempl/elf32.em $(srcdir)/scripttempl/elf.sc ${GEN_DEPENDS}
 	${GENSCRIPTS} elf32lmip "$(tdir_elf32lmip)"
 eelf32lppc.c: $(srcdir)/emulparams/elf32lppc.sh \
+  $(srcdir)/emulparams/elf32ppc.sh \
   $(srcdir)/emultempl/elf32.em $(srcdir)/scripttempl/elf.sc ${GEN_DEPENDS}
 	${GENSCRIPTS} elf32lppc "$(tdir_elf32lppc)"
 eelf32lppcsim.c: $(srcdir)/emulparams/elf32lppcsim.sh \
+  $(srcdir)/emulparams/elf32lppc.sh $(srcdir)/emulparams/elf32ppc.sh \
   $(srcdir)/emultempl/elf32.em $(srcdir)/scripttempl/elf.sc ${GEN_DEPENDS}
 	${GENSCRIPTS} elf32lppcsim "$(tdir_elf32lppcsim)"
 eelf32lsmip.c: $(srcdir)/emulparams/elf32lsmip.sh \
+  $(srcdir)/emulparams/elf32lmip.sh $(srcdir)/emulparams/elf32bmip.sh \
   $(srcdir)/emultempl/elf32.em $(srcdir)/scripttempl/elf.sc ${GEN_DEPENDS}
 	${GENSCRIPTS} elf32lsmip "$(tdir_elf32lsmip)"
 eelf32openrisc.c: $(srcdir)/emulparams/elf32openrisc.sh \
@@ -1218,15 +1138,18 @@ eelf32ppc.c: $(srcdir)/emulparams/elf32ppc.sh \
   $(srcdir)/emultempl/elf32.em $(srcdir)/scripttempl/elf.sc ${GEN_DEPENDS}
 	${GENSCRIPTS} elf32ppc "$(tdir_elf32ppc)"
 eelf32ppcsim.c: $(srcdir)/emulparams/elf32ppcsim.sh \
+  $(srcdir)/emulparams/elf32ppc.sh \
   $(srcdir)/emultempl/elf32.em $(srcdir)/scripttempl/elf.sc ${GEN_DEPENDS}
 	${GENSCRIPTS} elf32ppcsim "$(tdir_elf32ppcsim)"
 eelf32ppclinux.c: $(srcdir)/emulparams/elf32ppclinux.sh \
+  $(srcdir)/emulparams/elf32ppc.sh \
   $(srcdir)/emultempl/elf32.em $(srcdir)/scripttempl/elf.sc ${GEN_DEPENDS}
 	${GENSCRIPTS} elf32ppclinux "$(tdir_elf32ppclinux)"
 eelf64ppc.c: $(srcdir)/emulparams/elf64ppc.sh \
   $(srcdir)/emultempl/elf32.em $(srcdir)/scripttempl/elf.sc ${GEN_DEPENDS}
 	${GENSCRIPTS} elf64ppc "$(tdir_elf64ppc)"
 eelf64lppc.c: $(srcdir)/emulparams/elf64lppc.sh \
+  $(srcdir)/emulparams/elf64ppc.sh \
   $(srcdir)/emultempl/elf32.em $(srcdir)/scripttempl/elf.sc ${GEN_DEPENDS}
 	${GENSCRIPTS} elf64lppc "$(tdir_elf64lppc)"
 eelf32i370.c: $(srcdir)/emulparams/elf32i370.sh \
@@ -1236,6 +1159,7 @@ eelf64alpha.c: $(srcdir)/emulparams/elf64alpha.sh \
   $(srcdir)/emultempl/elf32.em $(srcdir)/scripttempl/elf.sc ${GEN_DEPENDS}
 	${GENSCRIPTS} elf64alpha "$(tdir_elf64alpha)"
 eelf64hppa.c: $(srcdir)/emulparams/elf64hppa.sh \
+  $(srcdir)/emulparams/hppa64linux.sh \
   $(srcdir)/emultempl/elf32.em $(srcdir)/scripttempl/elf.sc ${GEN_DEPENDS}
 	${GENSCRIPTS} elf64hppa "$(tdir_elf64hppa)"
 eelf64_aix.c: $(srcdir)/emulparams/elf64_aix.sh \
@@ -1252,6 +1176,7 @@ eelf64_sparc.c: $(srcdir)/emulparams/elf64_sparc.sh \
   $(srcdir)/emultempl/elf32.em $(srcdir)/scripttempl/elf.sc ${GEN_DEPENDS}
 	${GENSCRIPTS} elf64_sparc "$(tdir_elf64_sparc)"
 eelf64bmip.c: $(srcdir)/emulparams/elf64bmip.sh \
+  $(srcdir)/emulparams/elf32bmipn32.sh \
   $(srcdir)/emultempl/elf32.em $(srcdir)/scripttempl/elf.sc ${GEN_DEPENDS}
 	${GENSCRIPTS} elf64bmip "$(tdir_elf64bmip)"
 eelf64mmix.c: $(srcdir)/emulparams/elf64mmix.sh \
@@ -1263,9 +1188,11 @@ emmo.c: $(srcdir)/emulparams/mmo.sh $(srcdir)/emultempl/mmix-elfnmmo.em \
   $(srcdir)/scripttempl/mmo.sc ${GEN_DEPENDS}
 	${GENSCRIPTS} mmo "$(tdir_mmo)"
 eelf64btsmip.c: $(srcdir)/emulparams/elf64btsmip.sh \
+  $(srcdir)/emulparams/elf32bmipn32.sh \
   $(srcdir)/emultempl/elf32.em $(srcdir)/scripttempl/elf.sc ${GEN_DEPENDS}
 	${GENSCRIPTS} elf64btsmip "$(tdir_elf64btsmip)"
 eelf64ltsmip.c: $(srcdir)/emulparams/elf64ltsmip.sh \
+  $(srcdir)/emulparams/elf64btsmip.sh $(srcdir)/emulparams/elf32bmipn32.sh \
   $(srcdir)/emultempl/elf32.em $(srcdir)/scripttempl/elf.sc ${GEN_DEPENDS}
 	${GENSCRIPTS} elf64ltsmip "$(tdir_elf64ltsmip)"
 eelf_i386.c: $(srcdir)/emulparams/elf_i386.sh \
@@ -1305,9 +1232,11 @@ eh8300elf.c: $(srcdir)/emulparams/h8300elf.sh \
   $(srcdir)/emultempl/elf32.em $(srcdir)/scripttempl/elf.sc ${GEN_DEPENDS}
 	${GENSCRIPTS} h8300elf "$(tdir_h8300elf)"
 eh8300helf.c: $(srcdir)/emulparams/h8300helf.sh \
+  $(srcdir)/emulparams/h8300elf.sh \
   $(srcdir)/emultempl/elf32.em $(srcdir)/scripttempl/elf.sc ${GEN_DEPENDS}
 	${GENSCRIPTS} h8300helf "$(tdir_h8300helf)"
 eh8300self.c: $(srcdir)/emulparams/h8300self.sh \
+  $(srcdir)/emulparams/h8300elf.sh \
   $(srcdir)/emultempl/elf32.em $(srcdir)/scripttempl/elf.sc ${GEN_DEPENDS}
 	${GENSCRIPTS} h8300self "$(tdir_h8300self)"
 eh8500.c: $(srcdir)/emulparams/h8500.sh \
@@ -1455,6 +1384,7 @@ emipspe.c: $(srcdir)/emulparams/mipspe.sh \
   $(srcdir)/emultempl/pe.em $(srcdir)/scripttempl/pe.sc ${GEN_DEPENDS}
 	${GENSCRIPTS} mipspe "$(tdir_mips)"
 emn10300.c: $(srcdir)/emulparams/mn10300.sh \
+  $(srcdir)/emulparams/mn10200.sh \
   $(srcdir)/emultempl/elf32.em $(srcdir)/scripttempl/elf.sc ${GEN_DEPENDS}
 	${GENSCRIPTS} mn10300 "$(tdir_mn10300)"
 emn10200.c: $(srcdir)/emulparams/mn10200.sh \
@@ -1500,15 +1430,18 @@ eshelf.c: $(srcdir)/emulparams/shelf.sh \
   $(srcdir)/emultempl/elf32.em $(srcdir)/scripttempl/elf.sc ${GEN_DEPENDS}
 	${GENSCRIPTS} shelf "$(tdir_shelf)"
 eshelf_linux.c: $(srcdir)/emulparams/shelf_linux.sh \
+  $(srcdir)/emulparams/shlelf_linux.sh \
   $(srcdir)/emultempl/elf32.em $(srcdir)/scripttempl/elf.sc ${GEN_DEPENDS}
 	${GENSCRIPTS} shelf_linux "$(tdir_shelf_linux)"
 eshlelf_linux.c: $(srcdir)/emulparams/shlelf_linux.sh \
   $(srcdir)/emultempl/elf32.em $(srcdir)/scripttempl/elf.sc ${GEN_DEPENDS}
 	${GENSCRIPTS} shlelf_linux "$(tdir_shlelf_linux)"
 eshlelf.c: $(srcdir)/emulparams/shlelf.sh \
+  $(srcdir)/emulparams/shelf.sh \
   $(srcdir)/emultempl/elf32.em $(srcdir)/scripttempl/elf.sc ${GEN_DEPENDS}
 	${GENSCRIPTS} shlelf "$(tdir_shlelf)"
 eshl.c: $(srcdir)/emulparams/shl.sh \
+  $(srcdir)/emulparams/sh.sh \
   $(srcdir)/emultempl/generic.em $(srcdir)/scripttempl/sh.sc ${GEN_DEPENDS}
 	${GENSCRIPTS} shl "$(tdir_shl)"
 eshpe.c: $(srcdir)/emulparams/shpe.sh \
@@ -1681,10 +1614,6 @@ ld.1: $(srcdir)/ld.texinfo
 	        mv -f $@.T$$$$ $@) || \
 	        (rm -f $@.T$$$$ && exit 1)
 	rm -f ld.pod
-
-# We want to reconfigure if configure.host or configure.tgt changes.
-config.status: $(srcdir)/configure $(srcdir)/configure.host $(srcdir)/configure.tgt
-	$(SHELL) ./config.status --recheck
 mostlyclean-local:
 	-rm -rf tmpdir
 
@@ -1836,7 +1765,6 @@ deffilep.o: deffilep.c $(INCDIR)/libiberty.h $(INCDIR)/ansidecl.h \
   sysdep.h config.h $(INCDIR)/fopen-same.h ld.h $(INCDIR)/bin-bugs.h \
   ldmisc.h deffile.h
 # IF YOU PUT ANYTHING HERE IT WILL GO AWAY
-
 # Tell versions [3.59,3.63) of GNU make to not export all variables.
 # Otherwise a system limit (for SysV at least) may be exceeded.
 .NOEXPORT:
diff --git a/ld/emulparams/armelf.sh b/ld/emulparams/armelf.sh
index 697bf90..0e8ebc5 100644
--- a/ld/emulparams/armelf.sh
+++ b/ld/emulparams/armelf.sh
@@ -20,6 +20,5 @@ MAXPAGESIZE=256
 ENTRY=_start
 EMBEDDED=yes
 
-# Hmmm, there's got to be a better way.  This sets the stack to the
-# top of the simulator memory (2^19 bytes).
-OTHER_RELOCATING_SECTIONS='.stack 0x80000 : { _stack = .; *(.stack) }'
+# This sets the stack to the top of the simulator memory (2^19 bytes).
+STACK_ADDR=0x80000
diff --git a/ld/emulparams/armelf_oabi.sh b/ld/emulparams/armelf_oabi.sh
index d568328..f1c967d 100644
--- a/ld/emulparams/armelf_oabi.sh
+++ b/ld/emulparams/armelf_oabi.sh
@@ -16,6 +16,5 @@ MAXPAGESIZE=256
 ENTRY=_start
 EMBEDDED=yes
  
-# Hmmm, there's got to be a better way.  This sets the stack to the
-# top of the simulator memory (2^19 bytes).
-OTHER_RELOCATING_SECTIONS='.stack 0x80000 : { _stack = .; *(.stack) }'
+# This sets the stack to the top of the simulator memory (2^19 bytes).
+STACK_ADDR=0x80000
diff --git a/ld/emulparams/criself.sh b/ld/emulparams/criself.sh
index 141ab51..f961281 100644
--- a/ld/emulparams/criself.sh
+++ b/ld/emulparams/criself.sh
@@ -32,11 +32,11 @@ __start = DEFINED(__start) ? __start :
 '
 
 # Smuggle an "OTHER_TEXT_END_SYMBOLS" here.
-OTHER_READONLY_SECTIONS='PROVIDE (__Etext = .);'
+OTHER_READONLY_SECTIONS="${RELOCATING+PROVIDE (__Etext = .);}"
 DATA_START_SYMBOLS='PROVIDE (__Sdata = .);'
 
 # Smuggle an "OTHER_DATA_END_SYMBOLS" here.
-OTHER_SDATA_SECTIONS='PROVIDE (__Edata = .);'
+OTHER_SDATA_SECTIONS="${RELOCATING+PROVIDE (__Edata = .);}"
 
 # If .bss does not immediately follow .data but has its own start
 # address, we can't get to it with OTHER_BSS_SYMBOLS, neither can we
@@ -95,11 +95,8 @@ CTOR_END='
  ___elf_ctors_dtors_end = .;
 '
 
-
-# Smuggle an "OTHER_ALL_END_SYMBOLS" here.
 # Also add the other symbols provided for rsim/xsim and elinux.
-OTHER_RELOCATING_SECTIONS='
-PROVIDE (__Eall = .);
-PROVIDE (__Endmem = 0x10000000); 
-PROVIDE (__Stacksize = 0);
-'
+OTHER_END_SYMBOLS="
+  PROVIDE (__Eall = .);
+  PROVIDE (__Endmem = 0x10000000); 
+  PROVIDE (__Stacksize = 0);"
diff --git a/ld/emulparams/crislinux.sh b/ld/emulparams/crislinux.sh
index e33b462..259670d 100644
--- a/ld/emulparams/crislinux.sh
+++ b/ld/emulparams/crislinux.sh
@@ -22,18 +22,16 @@ MAXPAGESIZE=8192
 TEXT_START_SYMBOLS='PROVIDE (__Stext = .);'
 
 # Smuggle an "OTHER_TEXT_END_SYMBOLS" here.
-OTHER_READONLY_SECTIONS='PROVIDE (__Etext = .);'
+OTHER_READONLY_SECTIONS="${RELOCATING+PROVIDE (__Etext = .);}"
 DATA_START_SYMBOLS='PROVIDE (__Sdata = .);'
 
 # Smuggle an "OTHER_DATA_END_SYMBOLS" here.
-OTHER_SDATA_SECTIONS='PROVIDE (__Edata = .);'
+OTHER_SDATA_SECTIONS="${RELOCATING+PROVIDE (__Edata = .);}"
 OTHER_BSS_SYMBOLS='PROVIDE (__Sbss = .);'
 OTHER_BSS_END_SYMBOLS='PROVIDE (__Ebss = .);'
 
-# Smuggle an "OTHER_ALL_END_SYMBOLS" here.
 # Also add the other symbols provided for rsim/xsim and elinux.
-OTHER_RELOCATING_SECTIONS='
-PROVIDE (__Eall = .);
-PROVIDE(__Endmem = 0x10000000); 
-PROVIDE(__Stacksize = 0);
-'
+OTHER_END_SYMBOLS="
+  PROVIDE (__Eall = .);
+  PROVIDE (__Endmem = 0x10000000); 
+  PROVIDE (__Stacksize = 0);"
diff --git a/ld/emulparams/elf32b4300.sh b/ld/emulparams/elf32b4300.sh
index 88626a4..4bfdd6e 100644
--- a/ld/emulparams/elf32b4300.sh
+++ b/ld/emulparams/elf32b4300.sh
@@ -1,29 +1,10 @@
-SCRIPT_NAME=elf
-OUTPUT_FORMAT="elf32-bigmips"
-BIG_OUTPUT_FORMAT="elf32-bigmips"
-LITTLE_OUTPUT_FORMAT="elf32-littlemips"
+# If you change this file, please also look at files which source this one:
+# elf32l4300.sh
+
+EMBEDDED=yes
+. ${srcdir}/emulparams/elf32bmip.sh
 TEXT_START_ADDR=0xa0020000
-MAXPAGESIZE=0x40000
-INITIAL_READONLY_SECTIONS='.reginfo : { *(.reginfo) }'
-OTHER_TEXT_SECTIONS='*(.mips16.fn.*) *(.mips16.call.*)'
-OTHER_GOT_SYMBOLS='
-  _gp = ALIGN(16) + 0x7ff0;
-'
-OTHER_SDATA_SECTIONS='
-  .lit8 : { *(.lit8) }
-  .lit4 : { *(.lit4) }
-'
-TEXT_START_SYMBOLS='_ftext = . ;'
-DATA_START_SYMBOLS='_fdata = . ;'
-OTHER_BSS_SYMBOLS='_fbss = .;'
+unset NONPAGED_TEXT_START_ADDR
+unset SHLIB_TEXT_START_ADDR
 EXECUTABLE_SYMBOLS='_DYNAMIC_LINK = 0;'
-OTHER_SECTIONS='
-  .gptab.sdata : { *(.gptab.data) *(.gptab.sdata) }
-  .gptab.sbss : { *(.gptab.bss) *(.gptab.sbss) }
-'
-ARCH=mips
-MACHINE=
-TEMPLATE_NAME=elf32
-GENERATE_SHLIB_SCRIPT=yes
 DYNAMIC_LINK=false
-EMBEDDED=yes
diff --git a/ld/emulparams/elf32bmip.sh b/ld/emulparams/elf32bmip.sh
index 0c07663..cf2abde 100644
--- a/ld/emulparams/elf32bmip.sh
+++ b/ld/emulparams/elf32bmip.sh
@@ -1,22 +1,27 @@
+# If you change this file, please also look at files which source this one:
+# elf32b4300.sh elf32bsmip.sh elf32btsmip.sh elf32ebmip.sh elf32lmip.sh
+
 SCRIPT_NAME=elf
 OUTPUT_FORMAT="elf32-bigmips"
 BIG_OUTPUT_FORMAT="elf32-bigmips"
 LITTLE_OUTPUT_FORMAT="elf32-littlemips"
 TEXT_START_ADDR=0x0400000
-DATA_ADDR=0x10000000
+test -n "${EMBEDDED}" || DATA_ADDR=0x10000000
 MAXPAGESIZE=0x40000
 NONPAGED_TEXT_START_ADDR=0x0400000
 SHLIB_TEXT_START_ADDR=0x5ffe0000
-TEXT_DYNAMIC=
-INITIAL_READONLY_SECTIONS='.reginfo : { *(.reginfo) }'
+test -n "${EMBEDDED}" || TEXT_DYNAMIC=
+INITIAL_READONLY_SECTIONS="
+  .reginfo      ${RELOCATING-0} : { *(.reginfo) }
+"
 OTHER_TEXT_SECTIONS='*(.mips16.fn.*) *(.mips16.call.*)'
 OTHER_GOT_SYMBOLS='
   _gp = ALIGN(16) + 0x7ff0;
 '
-OTHER_SDATA_SECTIONS='
-  .lit8 : { *(.lit8) }
-  .lit4 : { *(.lit4) }
-'
+OTHER_SDATA_SECTIONS="
+  .lit8         ${RELOCATING-0} : { *(.lit8) }
+  .lit4         ${RELOCATING-0} : { *(.lit4) }
+"
 TEXT_START_SYMBOLS='_ftext = . ;'
 DATA_START_SYMBOLS='_fdata = . ;'
 OTHER_BSS_SYMBOLS='_fbss = .;'
diff --git a/ld/emulparams/elf32bmipn32.sh b/ld/emulparams/elf32bmipn32.sh
index b060808..8dc1735 100755
--- a/ld/emulparams/elf32bmipn32.sh
+++ b/ld/emulparams/elf32bmipn32.sh
@@ -1,3 +1,6 @@
+# If you change this file, please also look at files which source this one:
+# elf64bmip.sh elf64btsmip.sh
+
 # This is an ELF platform.
 SCRIPT_NAME=elf
 
@@ -17,11 +20,11 @@ ENTRY=__start
 OTHER_GOT_SYMBOLS='
   _gp = ALIGN(16) + 0x7ff0;
 '
-OTHER_SDATA_SECTIONS='
-  .lit8 : { *(.lit8) }
-  .lit4 : { *(.lit4) }
-  .srdata : { *(.srdata) }
-'
+OTHER_SDATA_SECTIONS="
+  .lit8         ${RELOCATING-0} : { *(.lit8) }
+  .lit4         ${RELOCATING-0} : { *(.lit4) }
+  .srdata       ${RELOCATING-0} : { *(.srdata) }
+"
 
 # Magic symbols.
 TEXT_START_SYMBOLS='_ftext = . ;'
@@ -41,35 +44,28 @@ EXECUTABLE_SYMBOLS="
 # segment.
 WRITABLE_RODATA=
 
-OTHER_RELOCATING_SECTIONS='
-  .MIPS.events.text :
+OTHER_SECTIONS="
+  .MIPS.events.text ${RELOCATING-0} :
     {
-       *(.MIPS.events.text)
-       *(.MIPS.events.gnu.linkonce.t*)
+       *(.MIPS.events.text${RELOCATING+ .MIPS.events.gnu.linkonce.t*})
     }
-  .MIPS.content.text : 
+  .MIPS.content.text ${RELOCATING-0} : 
     {
-       *(.MIPS.content.text)
-       *(.MIPS.content.gnu.linkonce.t*)
+       *(.MIPS.content.text${RELOCATING+ .MIPS.content.gnu.linkonce.t*})
     }
-  .MIPS.events.data : 
+  .MIPS.events.data ${RELOCATING-0} :
     {
-       *(.MIPS.events.data)
-       *(.MIPS.events.gnu.linkonce.d*)
+       *(.MIPS.events.data${RELOCATING+ .MIPS.events.gnu.linkonce.d*})
     }
-  .MIPS.content.data : 
+  .MIPS.content.data ${RELOCATING-0} :
     {
-       *(.MIPS.content.data)
-       *(.MIPS.content.gnu.linkonce.d*)
+       *(.MIPS.content.data${RELOCATING+ .MIPS.content.gnu.linkonce.d*})
     }
-  .MIPS.events.rodata : 
+  .MIPS.events.rodata ${RELOCATING-0} :
     {
-       *(.MIPS.events.rodata)
-       *(.MIPS.events.gnu.linkonce.r*)
+       *(.MIPS.events.rodata${RELOCATING+ .MIPS.events.gnu.linkonce.r*})
     }
-  .MIPS.content.rodata : 
+  .MIPS.content.rodata ${RELOCATING-0} :
     {
-       *(.MIPS.content.rodata)
-       *(.MIPS.content.gnu.linkonce.r*)
-    }
-'
+       *(.MIPS.content.rodata${RELOCATING+ .MIPS.content.gnu.linkonce.r*})
+    }"
diff --git a/ld/emulparams/elf32bsmip.sh b/ld/emulparams/elf32bsmip.sh
index 78421d1..5b2939a 100644
--- a/ld/emulparams/elf32bsmip.sh
+++ b/ld/emulparams/elf32bsmip.sh
@@ -1,31 +1,2 @@
-SCRIPT_NAME=elf
-OUTPUT_FORMAT="elf32-bigmips"
-BIG_OUTPUT_FORMAT="elf32-bigmips"
-LITTLE_OUTPUT_FORMAT="elf32-littlemips"
-TEXT_START_ADDR=0x0400000
-DATA_ADDR=0x10000000
-MAXPAGESIZE=0x40000
-NONPAGED_TEXT_START_ADDR=0x0400000
-SHLIB_TEXT_START_ADDR=0x5ffe0000
-TEXT_DYNAMIC=
-INITIAL_READONLY_SECTIONS='.reginfo : { *(.reginfo) }'
-OTHER_TEXT_SECTIONS='*(.mips16.fn.*) *(.mips16.call.*)'
-OTHER_GOT_SYMBOLS='
-  _gp = ALIGN(16) + 0x7ff0;
-'
-OTHER_SDATA_SECTIONS='
-  .lit8 : { *(.lit8) }
-  .lit4 : { *(.lit4) }
-'
-TEXT_START_SYMBOLS='_ftext = . ;'
-DATA_START_SYMBOLS='_fdata = . ;'
-OTHER_BSS_SYMBOLS='_fbss = .;'
-OTHER_SECTIONS='
-  .gptab.sdata : { *(.gptab.data) *(.gptab.sdata) }
-  .gptab.sbss : { *(.gptab.bss) *(.gptab.sbss) }
-'
-ARCH=mips
-MACHINE=
-TEMPLATE_NAME=elf32
-GENERATE_SHLIB_SCRIPT=yes
+. ${srcdir}/emulparams/elf32bmip.sh
 ENTRY=__start
diff --git a/ld/emulparams/elf32btsmip.sh b/ld/emulparams/elf32btsmip.sh
index 9c8e344..5c32c2d 100644
--- a/ld/emulparams/elf32btsmip.sh
+++ b/ld/emulparams/elf32btsmip.sh
@@ -1,31 +1,9 @@
-SCRIPT_NAME=elf
+# If you change this file, please also look at files which source this one:
+# elf32ltsmip.sh
+
+. ${srcdir}/emulparams/elf32bmip.sh
 OUTPUT_FORMAT="elf32-tradbigmips"
 BIG_OUTPUT_FORMAT="elf32-tradbigmips"
 LITTLE_OUTPUT_FORMAT="elf32-tradlittlemips"
-TEXT_START_ADDR=0x0400000
-DATA_ADDR=0x10000000
-MAXPAGESIZE=0x40000
-NONPAGED_TEXT_START_ADDR=0x0400000
 SHLIB_TEXT_START_ADDR=0x0
-TEXT_DYNAMIC=
-INITIAL_READONLY_SECTIONS='.reginfo : { *(.reginfo) }'
-OTHER_TEXT_SECTIONS='*(.mips16.fn.*) *(.mips16.call.*)'
-OTHER_GOT_SYMBOLS='
-  _gp = ALIGN(16) + 0x7ff0;
-'
-OTHER_SDATA_SECTIONS='
-  .lit8 : { *(.lit8) }
-  .lit4 : { *(.lit4) }
-'
-TEXT_START_SYMBOLS='_ftext = . ;'
-DATA_START_SYMBOLS='_fdata = . ;'
-OTHER_BSS_SYMBOLS='_fbss = .;'
-OTHER_SECTIONS='
-  .gptab.sdata : { *(.gptab.data) *(.gptab.sdata) }
-  .gptab.sbss : { *(.gptab.bss) *(.gptab.sbss) }
-'
-ARCH=mips
-MACHINE=
-TEMPLATE_NAME=elf32
-GENERATE_SHLIB_SCRIPT=yes
 ENTRY=__start
diff --git a/ld/emulparams/elf32ebmip.sh b/ld/emulparams/elf32ebmip.sh
index 14eb318..704b43e 100644
--- a/ld/emulparams/elf32ebmip.sh
+++ b/ld/emulparams/elf32ebmip.sh
@@ -1,28 +1,2 @@
-SCRIPT_NAME=elf
-OUTPUT_FORMAT="elf32-bigmips"
-BIG_OUTPUT_FORMAT="elf32-bigmips"
-LITTLE_OUTPUT_FORMAT="elf32-littlemips"
-TEXT_START_ADDR=0x0400000
-MAXPAGESIZE=0x40000
-NONPAGED_TEXT_START_ADDR=0x0400000
-SHLIB_TEXT_START_ADDR=0x5ffe0000
-OTHER_TEXT_SECTIONS='*(.mips16.fn.*) *(.mips16.call.*)'
-OTHER_GOT_SYMBOLS='
-  _gp = ALIGN(16) + 0x7ff0;
-'
-OTHER_SDATA_SECTIONS='
-  .lit8 : { *(.lit8) }
-  .lit4 : { *(.lit4) }
-'
-TEXT_START_SYMBOLS='_ftext = . ;'
-DATA_START_SYMBOLS='_fdata = . ;'
-OTHER_BSS_SYMBOLS='_fbss = .;'
-OTHER_SECTIONS='
-  .gptab.sdata : { *(.gptab.data) *(.gptab.sdata) }
-  .gptab.sbss : { *(.gptab.bss) *(.gptab.sbss) }
-'
-ARCH=mips
-MACHINE=
-TEMPLATE_NAME=elf32
-GENERATE_SHLIB_SCRIPT=yes
 EMBEDDED=yes
+. ${srcdir}/emulparams/elf32bmip.sh
diff --git a/ld/emulparams/elf32elmip.sh b/ld/emulparams/elf32elmip.sh
index 865553c..c94e503 100644
--- a/ld/emulparams/elf32elmip.sh
+++ b/ld/emulparams/elf32elmip.sh
@@ -1,28 +1,2 @@
-SCRIPT_NAME=elf
-OUTPUT_FORMAT="elf32-littlemips"
-BIG_OUTPUT_FORMAT="elf32-bigmips"
-LITTLE_OUTPUT_FORMAT="elf32-littlemips"
-TEXT_START_ADDR=0x0400000
-MAXPAGESIZE=0x40000
-NONPAGED_TEXT_START_ADDR=0x0400000
-SHLIB_TEXT_START_ADDR=0x5ffe0000
-OTHER_TEXT_SECTIONS='*(.mips16.fn.*) *(.mips16.call.*)'
-OTHER_GOT_SYMBOLS='
-  _gp = ALIGN(16) + 0x7ff0;
-'
-OTHER_SDATA_SECTIONS='
-  .lit8 : { *(.lit8) }
-  .lit4 : { *(.lit4) }
-'
-TEXT_START_SYMBOLS='_ftext = . ;'
-DATA_START_SYMBOLS='_fdata = . ;'
-OTHER_BSS_SYMBOLS='_fbss = .;'
-OTHER_SECTIONS='
-  .gptab.sdata : { *(.gptab.data) *(.gptab.sdata) }
-  .gptab.sbss : { *(.gptab.bss) *(.gptab.sbss) }
-'
-ARCH=mips
-MACHINE=
-TEMPLATE_NAME=elf32
-GENERATE_SHLIB_SCRIPT=yes
 EMBEDDED=yes
+. ${srcdir}/emulparams/elf32lmip.sh
diff --git a/ld/emulparams/elf32fr30.sh b/ld/emulparams/elf32fr30.sh
index 53d6a74..cec006c 100755
--- a/ld/emulparams/elf32fr30.sh
+++ b/ld/emulparams/elf32fr30.sh
@@ -7,4 +7,4 @@ MAXPAGESIZE=256
 ENTRY=_start
 EMBEDDED=yes
 NOP=0x9fa09fa0
-OTHER_RELOCATING_SECTIONS='PROVIDE (__stack = 0x200000);'
+OTHER_END_SYMBOLS='PROVIDE (__stack = 0x200000);'
diff --git a/ld/emulparams/elf32l4300.sh b/ld/emulparams/elf32l4300.sh
index 4bd48e8..865792a 100644
--- a/ld/emulparams/elf32l4300.sh
+++ b/ld/emulparams/elf32l4300.sh
@@ -1,29 +1,4 @@
-SCRIPT_NAME=elf
+. ${srcdir}/emulparams/elf32b4300.sh
 OUTPUT_FORMAT="elf32-littlemips"
 BIG_OUTPUT_FORMAT="elf32-bigmips"
 LITTLE_OUTPUT_FORMAT="elf32-littlemips"
-TEXT_START_ADDR=0xa0020000
-MAXPAGESIZE=0x40000
-INITIAL_READONLY_SECTIONS='.reginfo : { *(.reginfo) }'
-OTHER_TEXT_SECTIONS='*(.mips16.fn.*) *(.mips16.call.*)'
-OTHER_GOT_SYMBOLS='
-  _gp = ALIGN(16) + 0x7ff0;
-'
-OTHER_SDATA_SECTIONS='
-  .lit8 : { *(.lit8) }
-  .lit4 : { *(.lit4) }
-'
-TEXT_START_SYMBOLS='_ftext = . ;'
-DATA_START_SYMBOLS='_fdata = . ;'
-OTHER_BSS_SYMBOLS='_fbss = .;'
-EXECUTABLE_SYMBOLS='_DYNAMIC_LINK = 0;'
-OTHER_SECTIONS='
-  .gptab.sdata : { *(.gptab.data) *(.gptab.sdata) }
-  .gptab.sbss : { *(.gptab.bss) *(.gptab.sbss) }
-'
-ARCH=mips
-MACHINE=
-TEMPLATE_NAME=elf32
-GENERATE_SHLIB_SCRIPT=yes
-DYNAMIC_LINK=false
-EMBEDDED=yes
diff --git a/ld/emulparams/elf32lmip.sh b/ld/emulparams/elf32lmip.sh
index 99a9dd8..14d4ded 100644
--- a/ld/emulparams/elf32lmip.sh
+++ b/ld/emulparams/elf32lmip.sh
@@ -1,30 +1,7 @@
-SCRIPT_NAME=elf
+# If you change this file, please also look at files which source this one:
+# elf32elmip.sh elf32lsmip.sh
+
+. ${srcdir}/emulparams/elf32bmip.sh
 OUTPUT_FORMAT="elf32-littlemips"
 BIG_OUTPUT_FORMAT="elf32-bigmips"
 LITTLE_OUTPUT_FORMAT="elf32-littlemips"
-TEXT_START_ADDR=0x0400000
-DATA_ADDR=0x10000000
-MAXPAGESIZE=0x40000
-NONPAGED_TEXT_START_ADDR=0x0400000
-SHLIB_TEXT_START_ADDR=0x5ffe0000
-TEXT_DYNAMIC=
-INITIAL_READONLY_SECTIONS='.reginfo : { *(.reginfo) }'
-OTHER_TEXT_SECTIONS='*(.mips16.fn.*) *(.mips16.call.*)'
-OTHER_GOT_SYMBOLS='
-  _gp = ALIGN(16) + 0x7ff0;
-'
-OTHER_SDATA_SECTIONS='
-  .lit8 : { *(.lit8) }
-  .lit4 : { *(.lit4) }
-'
-TEXT_START_SYMBOLS='_ftext = . ;'
-DATA_START_SYMBOLS='_fdata = . ;'
-OTHER_BSS_SYMBOLS='_fbss = .;'
-OTHER_SECTIONS='
-  .gptab.sdata : { *(.gptab.data) *(.gptab.sdata) }
-  .gptab.sbss : { *(.gptab.bss) *(.gptab.sbss) }
-'
-ARCH=mips
-MACHINE=
-TEMPLATE_NAME=elf32
-GENERATE_SHLIB_SCRIPT=yes
diff --git a/ld/emulparams/elf32lppc.sh b/ld/emulparams/elf32lppc.sh
index bc9125d..18cce48 100644
--- a/ld/emulparams/elf32lppc.sh
+++ b/ld/emulparams/elf32lppc.sh
@@ -1,18 +1,5 @@
-TEMPLATE_NAME=elf32
-# If you change this, please also look at:
-# elf32ppc.sh elf32ppcsim.sh elf32lppc.sh elf32lppcsim.sh elf32ppclinux.sh
-GENERATE_SHLIB_SCRIPT=yes
-SCRIPT_NAME=elf
+# If you change this file, please also look at files which source this one:
+# elf32lppcsim.sh
+
+. ${srcdir}/emulparams/elf32ppc.sh
 OUTPUT_FORMAT="elf32-powerpcle"
-TEXT_START_ADDR=0x01800000
-MAXPAGESIZE=0x10000
-ARCH=powerpc
-MACHINE=
-BSS_PLT=
-EXECUTABLE_SYMBOLS='PROVIDE (__stack = 0); PROVIDE (___stack = 0);'
-OTHER_BSS_END_SYMBOLS='__end = .;'
-OTHER_READWRITE_SECTIONS='
-  .fixup	: { *(.fixup) }
-  .got1		: { *(.got1) }
-  .got2		: { *(.got2) }
-'
diff --git a/ld/emulparams/elf32lppcsim.sh b/ld/emulparams/elf32lppcsim.sh
index 74959f8..e743852 100644
--- a/ld/emulparams/elf32lppcsim.sh
+++ b/ld/emulparams/elf32lppcsim.sh
@@ -1,18 +1,2 @@
-TEMPLATE_NAME=elf32
-# If you change this, please also look at:
-# elf32ppc.sh elf32ppcsim.sh elf32lppc.sh elf32lppcsim.sh elf32ppclinux.sh
-GENERATE_SHLIB_SCRIPT=yes
-SCRIPT_NAME=elf
-OUTPUT_FORMAT="elf32-powerpcle"
+. ${srcdir}/emulparams/elf32lppc.sh
 TEXT_START_ADDR=0x10000000
-MAXPAGESIZE=0x10000
-ARCH=powerpc
-MACHINE=
-BSS_PLT=
-EXECUTABLE_SYMBOLS='PROVIDE (__stack = 0); PROVIDE (___stack = 0);'
-OTHER_BSS_END_SYMBOLS='__end = .;'
-OTHER_READWRITE_SECTIONS='
-  .fixup	: { *(.fixup) }
-  .got1		: { *(.got1) }
-  .got2		: { *(.got2) }
-'
diff --git a/ld/emulparams/elf32lsmip.sh b/ld/emulparams/elf32lsmip.sh
index 4f792e2..62e4f98 100644
--- a/ld/emulparams/elf32lsmip.sh
+++ b/ld/emulparams/elf32lsmip.sh
@@ -1,31 +1,2 @@
-SCRIPT_NAME=elf
-OUTPUT_FORMAT="elf32-littlemips"
-BIG_OUTPUT_FORMAT="elf32-bigmips"
-LITTLE_OUTPUT_FORMAT="elf32-littlemips"
-TEXT_START_ADDR=0x0400000
-DATA_ADDR=0x10000000
-MAXPAGESIZE=0x40000
-NONPAGED_TEXT_START_ADDR=0x0400000
-SHLIB_TEXT_START_ADDR=0x5ffe0000
-TEXT_DYNAMIC=
-INITIAL_READONLY_SECTIONS='.reginfo : { *(.reginfo) }'
-OTHER_TEXT_SECTIONS='*(.mips16.fn.*) *(.mips16.call.*)'
-OTHER_GOT_SYMBOLS='
-  _gp = ALIGN(16) + 0x7ff0;
-'
-OTHER_SDATA_SECTIONS='
-  .lit8 : { *(.lit8) }
-  .lit4 : { *(.lit4) }
-'
-TEXT_START_SYMBOLS='_ftext = . ;'
-DATA_START_SYMBOLS='_fdata = . ;'
-OTHER_BSS_SYMBOLS='_fbss = .;'
-OTHER_SECTIONS='
-  .gptab.sdata : { *(.gptab.data) *(.gptab.sdata) }
-  .gptab.sbss : { *(.gptab.bss) *(.gptab.sbss) }
-'
-ARCH=mips
-MACHINE=
-TEMPLATE_NAME=elf32
-GENERATE_SHLIB_SCRIPT=yes
+. ${srcdir}/emulparams/elf32lmip.sh
 ENTRY=__start
diff --git a/ld/emulparams/elf32ltsmip.sh b/ld/emulparams/elf32ltsmip.sh
index 443b98f..4a660f0 100644
--- a/ld/emulparams/elf32ltsmip.sh
+++ b/ld/emulparams/elf32ltsmip.sh
@@ -1,31 +1,2 @@
-SCRIPT_NAME=elf
+. ${srcdir}/emulparams/elf32btsmip.sh
 OUTPUT_FORMAT="elf32-tradlittlemips"
-BIG_OUTPUT_FORMAT="elf32-tradbigmips"
-LITTLE_OUTPUT_FORMAT="elf32-tradlittlemips"
-TEXT_START_ADDR=0x0400000
-DATA_ADDR=0x10000000
-MAXPAGESIZE=0x40000
-NONPAGED_TEXT_START_ADDR=0x0400000
-SHLIB_TEXT_START_ADDR=0x0
-TEXT_DYNAMIC=
-INITIAL_READONLY_SECTIONS='.reginfo : { *(.reginfo) }'
-OTHER_TEXT_SECTIONS='*(.mips16.fn.*) *(.mips16.call.*)'
-OTHER_GOT_SYMBOLS='
-  _gp = ALIGN(16) + 0x7ff0;
-'
-OTHER_SDATA_SECTIONS='
-  .lit8 : { *(.lit8) }
-  .lit4 : { *(.lit4) }
-'
-TEXT_START_SYMBOLS='_ftext = . ;'
-DATA_START_SYMBOLS='_fdata = . ;'
-OTHER_BSS_SYMBOLS='_fbss = .;'
-OTHER_SECTIONS='
-  .gptab.sdata : { *(.gptab.data) *(.gptab.sdata) }
-  .gptab.sbss : { *(.gptab.bss) *(.gptab.sbss) }
-'
-ARCH=mips
-MACHINE=
-TEMPLATE_NAME=elf32
-GENERATE_SHLIB_SCRIPT=yes
-ENTRY=__start
diff --git a/ld/emulparams/elf32mcore.sh b/ld/emulparams/elf32mcore.sh
index 06b2325..36befc8 100644
--- a/ld/emulparams/elf32mcore.sh
+++ b/ld/emulparams/elf32mcore.sh
@@ -24,9 +24,8 @@ NOP=0x0e0e0e0e
 OTHER_BSS_SYMBOLS="__bss_start__ = . ;"
 OTHER_BSS_END_SYMBOLS="__bss_end__ = . ;"
 
-# Hmmm, there's got to be a better way.  This sets the stack to the
-# top of the simulator memory (2^19 bytes).
-OTHER_RELOCATING_SECTIONS='.stack 0x80000 : { _stack = .; *(.stack) }'
+# This sets the stack to the top of the simulator memory (2^19 bytes).
+STACK_ADDR=0x80000
 
 TEMPLATE_NAME=elf32
 GENERATE_SHLIB_SCRIPT=yes
diff --git a/ld/emulparams/elf32ppc.sh b/ld/emulparams/elf32ppc.sh
index 2220810..261e4bf 100644
--- a/ld/emulparams/elf32ppc.sh
+++ b/ld/emulparams/elf32ppc.sh
@@ -1,6 +1,7 @@
+# If you change this file, please also look at files which source this one:
+# elf32lppc.sh elf32ppclinux.sh elf32ppcsim.sh
+
 TEMPLATE_NAME=elf32
-# If you change this, please also look at:
-# elf32ppc.sh elf32ppcsim.sh elf32lppc.sh elf32lppcsim.sh elf32ppclinux.sh
 GENERATE_SHLIB_SCRIPT=yes
 SCRIPT_NAME=elf
 OUTPUT_FORMAT="elf32-powerpc"
@@ -11,8 +12,8 @@ MACHINE=
 BSS_PLT=
 EXECUTABLE_SYMBOLS='PROVIDE (__stack = 0); PROVIDE (___stack = 0);'
 OTHER_BSS_END_SYMBOLS='__end = .;'
-OTHER_READWRITE_SECTIONS='
-  .fixup	: { *(.fixup) }
-  .got1		: { *(.got1) }
-  .got2		: { *(.got2) }
-'
+OTHER_READWRITE_SECTIONS="
+  .fixup        ${RELOCATING-0} : { *(.fixup) }
+  .got1         ${RELOCATING-0} : { *(.got1) }
+  .got2         ${RELOCATING-0} : { *(.got2) }
+"
diff --git a/ld/emulparams/elf32ppclinux.sh b/ld/emulparams/elf32ppclinux.sh
index 7c458a2..5ced00d 100644
--- a/ld/emulparams/elf32ppclinux.sh
+++ b/ld/emulparams/elf32ppclinux.sh
@@ -1,18 +1,8 @@
-TEMPLATE_NAME=elf32
-# If you change this, please also look at:
-# elf32ppc.sh elf32ppcsim.sh elf32lppc.sh elf32lppcsim.sh elf32ppclinux.sh
-GENERATE_SHLIB_SCRIPT=yes
-SCRIPT_NAME=elf
-OUTPUT_FORMAT="elf32-powerpc"
+. ${srcdir}/emulparams/elf32ppc.sh
 TEXT_START_ADDR=0x10000000
-MAXPAGESIZE=0x10000
-ARCH=powerpc
-MACHINE=
-BSS_PLT=
-OTHER_RELOCATING_SECTIONS='
-  /DISCARD/	: { *(.fixup) }
-'
-OTHER_READWRITE_SECTIONS='
-  .got1		: { *(.got1) }
-  .got2		: { *(.got2) }
-'
+unset EXECUTABLE_SYMBOLS
+unset OTHER_BSS_END_SYMBOLS
+test -z "${RELOCATING}" || OTHER_SECTIONS="/DISCARD/	: { *(.fixup) }"
+OTHER_READWRITE_SECTIONS="
+  .got1         ${RELOCATING-0} : { *(.got1) }
+  .got2         ${RELOCATING-0} : { *(.got2) }"
diff --git a/ld/emulparams/elf32ppcsim.sh b/ld/emulparams/elf32ppcsim.sh
index e25a170..c3466cf 100644
--- a/ld/emulparams/elf32ppcsim.sh
+++ b/ld/emulparams/elf32ppcsim.sh
@@ -1,18 +1,2 @@
-TEMPLATE_NAME=elf32
-# If you change this, please also look at:
-# elf32ppc.sh elf32ppcsim.sh elf32lppc.sh elf32lppcsim.sh elf32ppclinux.sh
-GENERATE_SHLIB_SCRIPT=yes
-SCRIPT_NAME=elf
-OUTPUT_FORMAT="elf32-powerpc"
+. ${srcdir}/emulparams/elf32ppc.sh
 TEXT_START_ADDR=0x10000000
-MAXPAGESIZE=0x10000
-ARCH=powerpc
-MACHINE=
-BSS_PLT=
-EXECUTABLE_SYMBOLS='PROVIDE (__stack = 0); PROVIDE (___stack = 0);'
-OTHER_BSS_END_SYMBOLS='__end = .;'
-OTHER_READWRITE_SECTIONS='
-  .fixup	: { *(.fixup) }
-  .got1		: { *(.got1) }
-  .got2		: { *(.got2) }
-'
diff --git a/ld/emulparams/elf64_aix.sh b/ld/emulparams/elf64_aix.sh
index af6b63a..23ba731 100644
--- a/ld/emulparams/elf64_aix.sh
+++ b/ld/emulparams/elf64_aix.sh
@@ -10,7 +10,12 @@ TEXT_START_ADDR="0x10000000"
 DATA_ADDR="0x20000000 + (. & (${MAXPAGESIZE} - 1))"
 GENERATE_SHLIB_SCRIPT=yes
 NOP=0x00300000010070000002000001000400  # a bundle full of nops
-OTHER_GOT_SECTIONS='.IA_64.pltoff : { *(.IA_64.pltoff) }'
-OTHER_PLT_RELOC_SECTIONS='.rela.IA_64.pltoff : { *(.rela.IA_64.pltoff) }'
-OTHER_READONLY_SECTIONS='.opd : { *(.opd) }  .IA_64.unwind_info : { *(.IA_64.unwind_info*) *(.gnu.linkonce.ia64unwi.*) }  .IA_64.unwind : { *(.IA_64.unwind*) *(.gnu.linkonce.ia64unw.*) }'
+OTHER_GOT_SECTIONS="
+  .IA_64.pltoff ${RELOCATING-0} : { *(.IA_64.pltoff) }"
+OTHER_PLT_RELOC_SECTIONS="
+  .rela.IA_64.pltoff ${RELOCATING-0} : { *(.rela.IA_64.pltoff) }"
+OTHER_READONLY_SECTIONS="
+  .opd          ${RELOCATING-0} : { *(.opd) }
+  .IA_64.unwind_info ${RELOCATING-0} : { *(.IA_64.unwind_info*${RELOCATING+ .gnu.linkonce.ia64unwi.*}) }
+  .IA_64.unwind ${RELOCATING-0} : { *(.IA_64.unwind*${RELOCATING+ .gnu.linkonce.ia64unw.*}) }"
 LIB_PATH=/usr/lib/ia64l64:/usr/lib:/usr/local/lib
diff --git a/ld/emulparams/elf64_ia64.sh b/ld/emulparams/elf64_ia64.sh
index 2dc7026..0699d3d 100644
--- a/ld/emulparams/elf64_ia64.sh
+++ b/ld/emulparams/elf64_ia64.sh
@@ -11,6 +11,11 @@ TEXT_START_ADDR="0x4000000000000000"
 DATA_ADDR="0x6000000000000000 + (. & (${MAXPAGESIZE} - 1))"
 GENERATE_SHLIB_SCRIPT=yes
 NOP=0x00300000010070000002000001000400  # a bundle full of nops
-OTHER_GOT_SECTIONS='.IA_64.pltoff : { *(.IA_64.pltoff) }'
-OTHER_PLT_RELOC_SECTIONS='.rela.IA_64.pltoff : { *(.rela.IA_64.pltoff) }'
-OTHER_READONLY_SECTIONS='.opd : { *(.opd) }  .IA_64.unwind_info : { *(.IA_64.unwind_info*) *(.gnu.linkonce.ia64unwi.*) }  .IA_64.unwind : { *(.IA_64.unwind*) *(.gnu.linkonce.ia64unw.*) }'
+OTHER_GOT_SECTIONS="
+  .IA_64.pltoff ${RELOCATING-0} : { *(.IA_64.pltoff) }"
+OTHER_PLT_RELOC_SECTIONS="
+  .rela.IA_64.pltoff ${RELOCATING-0} : { *(.rela.IA_64.pltoff) }"
+OTHER_READONLY_SECTIONS="
+  .opd          ${RELOCATING-0} : { *(.opd) }
+  .IA_64.unwind_info ${RELOCATING-0} : { *(.IA_64.unwind_info*${RELOCATING+ .gnu.linkonce.ia64unwi.*}) }
+  .IA_64.unwind ${RELOCATING-0} : { *(.IA_64.unwind*${RELOCATING+ .gnu.linkonce.ia64unw.*}) }"
diff --git a/ld/emulparams/elf64alpha.sh b/ld/emulparams/elf64alpha.sh
index f31a38c..e1eaa11 100644
--- a/ld/emulparams/elf64alpha.sh
+++ b/ld/emulparams/elf64alpha.sh
@@ -12,7 +12,8 @@ GENERATE_SHLIB_SCRIPT=yes
 DATA_PLT=
 NOP=0x47ff041f
 
-OTHER_READONLY_SECTIONS='.reginfo : { *(.reginfo) }'
+OTHER_READONLY_SECTIONS="
+  .reginfo      ${RELOCATING-0} : { *(.reginfo) }"
 
 # This code gets inserted into the generic elf32.sc linker script
 # and allows us to define our own command line switches.
diff --git a/ld/emulparams/elf64bmip.sh b/ld/emulparams/elf64bmip.sh
index 8610e2b..990fcb6 100755
--- a/ld/emulparams/elf64bmip.sh
+++ b/ld/emulparams/elf64bmip.sh
@@ -1,79 +1,12 @@
-# This is an ELF platform.
-SCRIPT_NAME=elf
-
-# Handle both big- and little-ended 32-bit MIPS objects.
-ARCH=mips
+. ${srcdir}/emulparams/elf32bmipn32.sh
 OUTPUT_FORMAT="elf64-bigmips"
 BIG_OUTPUT_FORMAT="elf64-bigmips"
 LITTLE_OUTPUT_FORMAT="elf64-littlemips"
-
-# Note that the elf32 template is used for 64-bit emulations as well 
-# as 32-bit emulations.
 ELFSIZE=64
-TEMPLATE_NAME=elf32
-
-TEXT_START_ADDR=0x10000000
-MAXPAGESIZE=0x100000
-ENTRY=__start
-
-# GOT-related settings.  
-OTHER_GOT_SYMBOLS='
-  _gp = ALIGN(16) + 0x7ff0;
-'
-OTHER_SDATA_SECTIONS='
-  .lit8 : { *(.lit8) }
-  .lit4 : { *(.lit4) }
-  .srdata : { *(.srdata) }
-'
 
-# Magic symbols.
-TEXT_START_SYMBOLS='_ftext = . ;'
-DATA_START_SYMBOLS='_fdata = . ;'
-OTHER_BSS_SYMBOLS='_fbss = .;'
 # IRIX6 defines these symbols.  0x40 is the size of the ELF header.
 EXECUTABLE_SYMBOLS="
   __dso_displacement = 0;
   __elf_header = ${TEXT_START_ADDR};
   __program_header_table = ${TEXT_START_ADDR} + 0x40;
 "
-
-# There are often dynamic relocations against the .rodata section.
-# Setting DT_TEXTREL in the .dynamic section does not convince the
-# IRIX6 linker to permit relocations against the text segment.
-# Following the IRIX linker, we simply put .rodata in the data
-# segment.
-WRITABLE_RODATA=
-
-
-OTHER_RELOCATING_SECTIONS='
-  .MIPS.events.text :
-    {
-       *(.MIPS.events.text)
-       *(.MIPS.events.gnu.linkonce.t*)
-    }
-  .MIPS.content.text : 
-    {
-       *(.MIPS.content.text)
-       *(.MIPS.content.gnu.linkonce.t*)
-    }
-  .MIPS.events.data : 
-    {
-       *(.MIPS.events.data)
-       *(.MIPS.events.gnu.linkonce.d*)
-    }
-  .MIPS.content.data : 
-    {
-       *(.MIPS.content.data)
-       *(.MIPS.content.gnu.linkonce.d*)
-    }
-  .MIPS.events.rodata : 
-    {
-       *(.MIPS.events.rodata)
-       *(.MIPS.events.gnu.linkonce.r*)
-    }
-  .MIPS.content.rodata : 
-    {
-       *(.MIPS.content.rodata)
-       *(.MIPS.content.gnu.linkonce.r*)
-    }
-'
diff --git a/ld/emulparams/elf64btsmip.sh b/ld/emulparams/elf64btsmip.sh
index 69edab9..df7566a 100644
--- a/ld/emulparams/elf64btsmip.sh
+++ b/ld/emulparams/elf64btsmip.sh
@@ -1,39 +1,20 @@
-# This is an ELF platform.
-SCRIPT_NAME=elf
+# If you change this file, please also look at files which source this one:
+# elf64ltsmip.sh
 
-# Handle both big- and little-ended 64-bit MIPS objects.
-ARCH=mips
+. ${srcdir}/emulparams/elf32bmipn32.sh
 OUTPUT_FORMAT="elf64-tradbigmips"
 BIG_OUTPUT_FORMAT="elf64-tradbigmips"
 LITTLE_OUTPUT_FORMAT="elf64-tradlittlemips"
-
-# Note that the elf32 template is used for 64-bit emulations as well 
-# as 32-bit emulations.
 ELFSIZE=64
-TEMPLATE_NAME=elf32
-GENERATE_SHLIB_SCRIPT=yes
 
-TEXT_START_ADDR=0x10000000
+GENERATE_SHLIB_SCRIPT=yes
 DATA_ADDR=0x0400000000
-MAXPAGESIZE=0x100000
 NONPAGED_TEXT_START_ADDR=0x10000000
 SHLIB_TEXT_START_ADDR=0x0
 TEXT_DYNAMIC=
-ENTRY=__start
-
-# GOT-related settings.  
-OTHER_GOT_SYMBOLS='
-  _gp = ALIGN(16) + 0x7ff0;
-'
-OTHER_SDATA_SECTIONS='
-  .lit8 : { *(.lit8) }
-  .lit4 : { *(.lit4) }
-'
 
-# Magic symbols.
-TEXT_START_SYMBOLS='_ftext = . ;'
-DATA_START_SYMBOLS='_fdata = . ;'
-OTHER_BSS_SYMBOLS='_fbss = .;'
+unset EXECUTABLE_SYMBOLS
+unset WRITABLE_RODATA
 
 # Magic sections.
 INITIAL_READONLY_SECTIONS='.reginfo : { *(.reginfo) }'
diff --git a/ld/emulparams/elf64hppa.sh b/ld/emulparams/elf64hppa.sh
index 402f8ce..8a44179 100755
--- a/ld/emulparams/elf64hppa.sh
+++ b/ld/emulparams/elf64hppa.sh
@@ -1,9 +1,10 @@
-SCRIPT_NAME=elf
-ELFSIZE=64
+. ${srcdir}/emulparams/hppa64linux.sh
 OUTPUT_FORMAT="elf64-hppa"
 LIB_PATH=/usr/lib/pa20_64:/opt/langtools/lib/pa20_64
 TEXT_START_ADDR=0x4000000000001000
 DATA_ADDR=0x8000000000001000
+TARGET_PAGE_SIZE=4096
+MAXPAGESIZE=4096
 
 # The HP dynamic linker actually requires you set the start of text and
 # data to some reasonable value.  Of course nobody knows what reasoanble
@@ -11,43 +12,8 @@ DATA_ADDR=0x8000000000001000
 SHLIB_TEXT_START_ADDR=0x4000000000001000
 SHLIB_DATA_ADDR=0x8000000000001000
 
-TARGET_PAGE_SIZE=4096
-MAXPAGESIZE=4096
-ARCH=hppa
-MACHINE=hppa2.0w
-ENTRY="main"
-TEMPLATE_NAME=elf32
-GENERATE_SHLIB_SCRIPT=yes
-# We really want multiple .stub sections, one for each input .text section,
-# but for now this is good enough.
-OTHER_READONLY_SECTIONS='.PARISC.unwind : { *(.PARISC.unwind) } '
-
-# The PA64 ELF port treats .plt sections differently than most.  We also have
-# to create a .opd section.  What most systems call the .got, we call the .dlt
-OTHER_READWRITE_SECTIONS='.opd : { *(.opd) } PROVIDE (__gp = .); .plt : { *(.plt) } .dlt : { *(.dlt) }'
-
-# The PA64 ELF port has two additional bss sections. huge bss and thread bss.
-# Make sure they end up in the appropriate location.  We also have to set
-# __TLS_SIZE to the size of the thread bss section.
-OTHER_BSS_SECTIONS='.hbss : { *(.hbss) } .tbss : { *(.tbss) }'
-#OTHER_BSS_END_SYMBOLS='PROVIDE (__TLS_SIZE = SIZEOF (.tbss));'
-OTHER_BSS_END_SYMBOLS='PROVIDE (__TLS_SIZE = 0); PROVIDE(__TLS_INIT_SIZE = 0); PROVIDE(__TLS_INIT_START = 0); PROVIDE(__TLS_INIT_A = 0); PROVIDE(__TLS_PREALLOC_DTV_A = 0);'
-
-# HPs use .dlt where systems use .got.  Sigh.
-OTHER_GOT_RELOC_SECTIONS='.rela.dlt : { *(.rela.dlt) }'
-
-# We're not actually providing a symbol anymore (due to the inability to be
-# safe in regards to shared libraries). So we just allocate the hunk of space
-# unconditionally, but do not mess around with the symbol table.
-DATA_START_SYMBOLS='. += 16;'
-
 # The linker is required to define these two symbols.
 EXECUTABLE_SYMBOLS='PROVIDE (__SYSTEM_ID = 0x214); PROVIDE (_FPU_STATUS = 0x0);'
-DATA_PLT=
-
-# .dynamic should be at the start of the .text segment.
-TEXT_DYNAMIC=
-
 # The PA64 ELF port needs two additional initializer sections and also wants
 # a start/end symbol pair for the .init and .fini sections.
 INIT_START='KEEP (*(.HP.init)); PROVIDE (__preinit_start = .); KEEP (*(.preinit)); PROVIDE (__preinit_end = .); PROVIDE (__init_start = .);'
diff --git a/ld/emulparams/elf64ltsmip.sh b/ld/emulparams/elf64ltsmip.sh
index c6d0e57..efd6b7d 100644
--- a/ld/emulparams/elf64ltsmip.sh
+++ b/ld/emulparams/elf64ltsmip.sh
@@ -1,44 +1,4 @@
-# This is an ELF platform.
-SCRIPT_NAME=elf
-
-# Handle both big- and little-ended 64-bit MIPS objects.
-ARCH=mips
+. ${srcdir}/emulparams/elf64btsmip.sh
 OUTPUT_FORMAT="elf64-tradlittlemips"
 BIG_OUTPUT_FORMAT="elf64-tradbigmips"
 LITTLE_OUTPUT_FORMAT="elf64-tradlittlemips"
-
-# Note that the elf32 template is used for 64-bit emulations as well 
-# as 32-bit emulations.
-ELFSIZE=64
-TEMPLATE_NAME=elf32
-GENERATE_SHLIB_SCRIPT=yes
-
-TEXT_START_ADDR=0x10000000
-DATA_ADDR=0x0400000000
-MAXPAGESIZE=0x100000
-NONPAGED_TEXT_START_ADDR=0x10000000
-SHLIB_TEXT_START_ADDR=0x0
-TEXT_DYNAMIC=
-ENTRY=__start
-
-# GOT-related settings.  
-OTHER_GOT_SYMBOLS='
-  _gp = ALIGN(16) + 0x7ff0;
-'
-OTHER_SDATA_SECTIONS='
-  .lit8 : { *(.lit8) }
-  .lit4 : { *(.lit4) }
-'
-
-# Magic symbols.
-TEXT_START_SYMBOLS='_ftext = . ;'
-DATA_START_SYMBOLS='_fdata = . ;'
-OTHER_BSS_SYMBOLS='_fbss = .;'
-
-# Magic sections.
-INITIAL_READONLY_SECTIONS='.reginfo : { *(.reginfo) }'
-OTHER_TEXT_SECTIONS='*(.mips16.fn.*) *(.mips16.call.*)'
-OTHER_SECTIONS='
-  .gptab.sdata : { *(.gptab.data) *(.gptab.sdata) }
-  .gptab.sbss : { *(.gptab.bss) *(.gptab.sbss) }
-'
diff --git a/ld/emulparams/elf64mmix.sh b/ld/emulparams/elf64mmix.sh
index dc4b9e5..c811ce0 100644
--- a/ld/emulparams/elf64mmix.sh
+++ b/ld/emulparams/elf64mmix.sh
@@ -44,17 +44,17 @@ OTHER_TEXT_SECTIONS='
  PROVIDE (Main = DEFINED (Main) ? Main : (DEFINED (_start) ? _start : _start.));
 '
 
-OTHER_RELOCATING_SECTIONS='
+OTHER_SECTIONS="
  .MMIX.reg_contents :
  {
    /* Note that this section always has a fixed VMA - that of its
       first register * 8.  */
    *(.MMIX.reg_contents);
  }
-'
+"
 
 # FIXME: Also bit by the PROVIDE bug?  If not, this could be
 # EXECUTABLE_SYMBOLS.
 # By default, put the high end of the stack where the register stack
 # begins.  They grow in opposite directions.  */
-OTHER_SECTIONS='PROVIDE (__Stack_start = 0x6000000000000000);'
+OTHER_END_SYMBOLS="PROVIDE (__Stack_start = 0x6000000000000000);"
diff --git a/ld/emulparams/h8300elf.sh b/ld/emulparams/h8300elf.sh
index e3024c6..0617d5b 100644
--- a/ld/emulparams/h8300elf.sh
+++ b/ld/emulparams/h8300elf.sh
@@ -1,3 +1,6 @@
+# If you change this file, please also look at files which source this one:
+# h8300helf.sh h8300self.sh
+
 SCRIPT_NAME=elf
 OUTPUT_FORMAT="elf32-h8300"
 TEXT_START_ADDR=0x100
@@ -6,7 +9,4 @@ TARGET_PAGE_SIZE=128
 ARCH=h8300
 TEMPLATE_NAME=elf32
 EMBEDDED=yes
-
-OTHER_RELOCATING_SECTIONS='
-.stack 0xfefc : { _stack = .; *(.stack) }
-'
+STACK_ADDR=0xfefc
diff --git a/ld/emulparams/h8300helf.sh b/ld/emulparams/h8300helf.sh
index cf72e1b..1cde35c 100644
--- a/ld/emulparams/h8300helf.sh
+++ b/ld/emulparams/h8300helf.sh
@@ -1,12 +1,3 @@
-SCRIPT_NAME=elf
-OUTPUT_FORMAT="elf32-h8300"
-TEXT_START_ADDR=0x100
-MAXPAGESIZE=2
-TARGET_PAGE_SIZE=128
+. ${srcdir}/emulparams/h8300elf.sh
 ARCH="h8300:h8300h"
-TEMPLATE_NAME=elf32
-EMBEDDED=yes
-
-OTHER_RELOCATING_SECTIONS='
-.stack 0x2fefc : { _stack = .; *(.stack) }
-'
+STACK_ADDR=0x2fefc
diff --git a/ld/emulparams/h8300self.sh b/ld/emulparams/h8300self.sh
index 20ed7ca..7539eec 100644
--- a/ld/emulparams/h8300self.sh
+++ b/ld/emulparams/h8300self.sh
@@ -1,12 +1,3 @@
-SCRIPT_NAME=elf
-OUTPUT_FORMAT="elf32-h8300"
-TEXT_START_ADDR=0x100
-MAXPAGESIZE=2
-TARGET_PAGE_SIZE=128
+. ${srcdir}/emulparams/h8300elf.sh
 ARCH="h8300:h8300s"
-TEMPLATE_NAME=elf32
-EMBEDDED=yes
-
-OTHER_RELOCATING_SECTIONS='
-.stack 0x2fefc : { _stack = .; *(.stack) }
-'
+STACK_ADDR=0x2fefc
diff --git a/ld/emulparams/hppa64linux.sh b/ld/emulparams/hppa64linux.sh
index 3fe422b..49bcf32 100644
--- a/ld/emulparams/hppa64linux.sh
+++ b/ld/emulparams/hppa64linux.sh
@@ -1,3 +1,6 @@
+# If you change this file, please also look at files which source this one:
+# elf64hppa.sh
+
 SCRIPT_NAME=elf
 ELFSIZE=64
 OUTPUT_FORMAT="elf64-hppa-linux"
@@ -12,18 +15,31 @@ GENERATE_SHLIB_SCRIPT=yes
 
 # We really want multiple .stub sections, one for each input .text section,
 # but for now this is good enough.
-OTHER_READONLY_SECTIONS='.PARISC.unwind : { *(.PARISC.unwind) } '
+OTHER_READONLY_SECTIONS="
+  .PARISC.unwind ${RELOCATING-0} : { *(.PARISC.unwind) }"
 
 # The PA64 ELF port treats .plt sections differently than most.  We also have
 # to create a .opd section.  What most systems call the .got, we call the .dlt
-OTHER_READWRITE_SECTIONS='.opd : { *(.opd) } PROVIDE (__gp = .); .plt : { *(.plt) } .dlt : { *(.dlt) }'
+OTHER_READWRITE_SECTIONS="
+  .opd          ${RELOCATING-0} : { *(.opd) }
+  ${RELOCATING+PROVIDE (__gp = .);}
+  .plt          ${RELOCATING-0} : { *(.plt) }
+  .dlt          ${RELOCATING-0} : { *(.dlt) }"
 
 # The PA64 ELF port has two additional bss sections. huge bss and thread bss.
 # Make sure they end up in the appropriate location.  We also have to set
 # __TLS_SIZE to the size of the thread bss section.
-OTHER_BSS_SECTIONS='.hbss : { *(.hbss) } .tbss : { *(.tbss) }'
+OTHER_BSS_SECTIONS="
+  .hbss         ${RELOCATING-0} : { *(.hbss) }
+  .tbss         ${RELOCATING-0} : { *(.tbss) }
+"
 #OTHER_BSS_END_SYMBOLS='PROVIDE (__TLS_SIZE = SIZEOF (.tbss));'
-OTHER_BSS_END_SYMBOLS='PROVIDE (__TLS_SIZE = 0);'
+OTHER_BSS_END_SYMBOLS='
+  PROVIDE (__TLS_SIZE = 0);
+  PROVIDE (__TLS_INIT_SIZE = 0);
+  PROVIDE (__TLS_INIT_START = 0);
+  PROVIDE (__TLS_INIT_A = 0);
+  PROVIDE (__TLS_PREALLOC_DTV_A = 0);'
 
 # HPs use .dlt where systems use .got.  Sigh.
 OTHER_GOT_RELOC_SECTIONS='.rela.dlt : { *(.rela.dlt) }'
diff --git a/ld/emulparams/hppalinux.sh b/ld/emulparams/hppalinux.sh
index 0a98298..a4c4904 100644
--- a/ld/emulparams/hppalinux.sh
+++ b/ld/emulparams/hppalinux.sh
@@ -8,7 +8,8 @@ ARCH=hppa
 MACHINE=hppa1.1    # We use 1.1 specific features.
 NOP=0x08000240
 START="_start"
-OTHER_READONLY_SECTIONS='.PARISC.unwind : { *(.PARISC.unwind) } '
+OTHER_READONLY_SECTIONS="
+  .PARISC.unwind ${RELOCATING-0} : { *(.PARISC.unwind) }"
 DATA_START_SYMBOLS='PROVIDE ($global$ = .);'
 DATA_PLT=
 GENERATE_SHLIB_SCRIPT=yes
diff --git a/ld/emulparams/m32relf.sh b/ld/emulparams/m32relf.sh
index cd7705a..c67472a 100644
--- a/ld/emulparams/m32relf.sh
+++ b/ld/emulparams/m32relf.sh
@@ -8,6 +8,5 @@ MACHINE=
 MAXPAGESIZE=32
 EMBEDDED=yes
 
-# Hmmm, there's got to be a better way.  This sets the stack to the
-# top of simulator memory (8MB).
-OTHER_RELOCATING_SECTIONS='PROVIDE (_stack = 0x800000);'
+# This sets the stack to the top of simulator memory (8MB).
+OTHER_END_SYMBOLS='PROVIDE (_stack = 0x800000);'
diff --git a/ld/emulparams/mn10200.sh b/ld/emulparams/mn10200.sh
index 6324322..f96224b 100644
--- a/ld/emulparams/mn10200.sh
+++ b/ld/emulparams/mn10200.sh
@@ -1,4 +1,6 @@
-MACHINE=
+# If you change this file, please also look at files which source this one:
+# mn10300.sh
+
 SCRIPT_NAME=elf
 OUTPUT_FORMAT="elf32-mn10200"
 TEXT_START_ADDR=0x0
@@ -8,9 +10,8 @@ MAXPAGESIZE=1
 ENTRY=_start
 EMBEDDED=yes
 
-# Hmmm, there's got to be a better way.  This sets the stack to the
-# top of the simulator memory (2^19 bytes).
-OTHER_RELOCATING_SECTIONS='.stack 0x80000 : { _stack = .; *(.stack) }'
+# This sets the stack to the top of the simulator memory (2^19 bytes).
+STACK_ADDR=0x80000
 
 # These are for compatibility with the COFF toolchain.
 # XXX These should definitely disappear.
diff --git a/ld/emulparams/mn10300.sh b/ld/emulparams/mn10300.sh
index 44a40e5..eec2f84 100644
--- a/ld/emulparams/mn10300.sh
+++ b/ld/emulparams/mn10300.sh
@@ -1,20 +1,3 @@
-MACHINE=
-SCRIPT_NAME=elf
+. ${srcdir}/emulparams/mn10200.sh
 OUTPUT_FORMAT="elf32-mn10300"
-TEXT_START_ADDR=0x0
 ARCH=mn10300
-MACHINE=
-MAXPAGESIZE=1
-ENTRY=_start
-EMBEDDED=yes
-
-# Hmmm, there's got to be a better way.  This sets the stack to the
-# top of the simulator memory (2^19 bytes).
-OTHER_RELOCATING_SECTIONS='.stack 0x80000 : { _stack = .; *(.stack) }'
-
-# These are for compatibility with the COFF toolchain.
-# XXX These should definitely disappear.
-CTOR_START='___ctors = .;'
-CTOR_END='___ctors_end = .;'
-DTOR_START='___dtors = .;'
-DTOR_END='___dtors_end = .;'
diff --git a/ld/emulparams/sh.sh b/ld/emulparams/sh.sh
index 38844fb..52d1443 100644
--- a/ld/emulparams/sh.sh
+++ b/ld/emulparams/sh.sh
@@ -1,3 +1,6 @@
+# If you change this file, please also look at files which source this one:
+# shl.sh
+
 SCRIPT_NAME=sh
 OUTPUT_FORMAT="coff-sh"
 TEXT_START_ADDR=0x8000
diff --git a/ld/emulparams/shelf.sh b/ld/emulparams/shelf.sh
index 95db587..d360022 100644
--- a/ld/emulparams/shelf.sh
+++ b/ld/emulparams/shelf.sh
@@ -1,3 +1,6 @@
+# If you change this file, please also look at files which source this one:
+# shlelf.sh
+
 SCRIPT_NAME=elf
 OUTPUT_FORMAT="elf32-sh"
 TEXT_START_ADDR=0x1000
@@ -14,4 +17,4 @@ CTOR_START='___ctors = .;'
 CTOR_END='___ctors_end = .;'
 DTOR_START='___dtors = .;'
 DTOR_END='___dtors_end = .;'
-OTHER_RELOCATING_SECTIONS='.stack 0x30000 : { _stack = .; *(.stack) }'
+STACK_ADDR=0x30000
diff --git a/ld/emulparams/shelf_linux.sh b/ld/emulparams/shelf_linux.sh
index d7b7631..b841bef 100644
--- a/ld/emulparams/shelf_linux.sh
+++ b/ld/emulparams/shelf_linux.sh
@@ -1,14 +1,2 @@
-SCRIPT_NAME=elf
+. ${srcdir}/emulparams/shlelf_linux.sh
 OUTPUT_FORMAT="elf32-shbig-linux"
-TEXT_START_ADDR=0x400000
-MAXPAGESIZE=0x10000
-ARCH=sh
-MACHINE=
-TEMPLATE_NAME=elf32
-GENERATE_SHLIB_SCRIPT=yes
-
-DATA_START_SYMBOLS='__data_start = . ;';
-
-OTHER_READWRITE_SECTIONS='
-  .note.ABI-tag : { *(.note.ABI-tag) }
-'
diff --git a/ld/emulparams/shl.sh b/ld/emulparams/shl.sh
index 360aac8..5fbb165 100644
--- a/ld/emulparams/shl.sh
+++ b/ld/emulparams/shl.sh
@@ -1,5 +1,2 @@
-SCRIPT_NAME=sh
+. ${srcdir}/emulparams/sh.sh
 OUTPUT_FORMAT="coff-shl"
-TEXT_START_ADDR=0x8000
-TARGET_PAGE_SIZE=128
-ARCH=sh
diff --git a/ld/emulparams/shlelf.sh b/ld/emulparams/shlelf.sh
index bb27f86..e19678b 100644
--- a/ld/emulparams/shlelf.sh
+++ b/ld/emulparams/shlelf.sh
@@ -1,17 +1,2 @@
-SCRIPT_NAME=elf
+. ${srcdir}/emulparams/shelf.sh
 OUTPUT_FORMAT="elf32-shl"
-TEXT_START_ADDR=0x1000
-MAXPAGESIZE=128
-ARCH=sh
-MACHINE=
-TEMPLATE_NAME=elf32
-GENERATE_SHLIB_SCRIPT=yes
-EMBEDDED=yes
-
-# These are for compatibility with the COFF toolchain.
-ENTRY=start
-CTOR_START='___ctors = .;'
-CTOR_END='___ctors_end = .;'
-DTOR_START='___dtors = .;'
-DTOR_END='___dtors_end = .;'
-OTHER_RELOCATING_SECTIONS='.stack 0x30000 : { _stack = .; *(.stack) }'
diff --git a/ld/emulparams/shlelf_linux.sh b/ld/emulparams/shlelf_linux.sh
index 191def7..875b2f3 100644
--- a/ld/emulparams/shlelf_linux.sh
+++ b/ld/emulparams/shlelf_linux.sh
@@ -1,3 +1,6 @@
+# If you change this file, please also look at files which source this one:
+# shelf_linux.sh
+
 SCRIPT_NAME=elf
 OUTPUT_FORMAT="elf32-sh-linux"
 TEXT_START_ADDR=0x400000
@@ -9,6 +12,5 @@ GENERATE_SHLIB_SCRIPT=yes
 
 DATA_START_SYMBOLS='__data_start = . ;';
 
-OTHER_READWRITE_SECTIONS='
-  .note.ABI-tag : { *(.note.ABI-tag) }
-'
+OTHER_READWRITE_SECTIONS="
+  .note.ABI-tag ${RELOCATING-0} : { *(.note.ABI-tag) }"
diff --git a/ld/scripttempl/elf.sc b/ld/scripttempl/elf.sc
index 8ccf803..0f3db03 100644
--- a/ld/scripttempl/elf.sc
+++ b/ld/scripttempl/elf.sc
@@ -33,6 +33,8 @@
 # 	combination of .init sections.
 #	FINI_START, FINI_END - statements just before and just after
 # 	combination of .fini sections.
+#	STACK_ADDR - start of a .stack section.
+#	OTHER_END_SYMBOLS - symbols to place right at the end of the script.
 #
 # When adding sections, do note that the names of some sections are used
 # when specifying the start address of the next.
@@ -55,6 +57,7 @@
 #  .sbss	.gnu.linkonce.sb.foo
 #  .sdata2	.gnu.linkonce.s2.foo
 #  .sbss2	.gnu.linkonce.sb2.foo
+#  .debug_info	.gnu.linkonce.wi.foo
 #
 #  Each of these can also have corresponding .rel.* and .rela.* sections.
 
@@ -65,13 +68,13 @@ if [ -z "$MACHINE" ]; then OUTPUT_ARCH=${ARCH}; else OUTPUT_ARCH=${ARCH}:${MACHI
 test -z "${ELFSIZE}" && ELFSIZE=32
 test -z "${ALIGNMENT}" && ALIGNMENT="${ELFSIZE} / 8"
 test "$LD_FLAG" = "N" && DATA_ADDR=.
-INTERP=".interp   ${RELOCATING-0} : { *(.interp) 	}"
-PLT=".plt    ${RELOCATING-0} : { *(.plt)	}"
-DYNAMIC=".dynamic     ${RELOCATING-0} : { *(.dynamic) }"
-RODATA=".rodata ${RELOCATING-0} : { *(.rodata) ${RELOCATING+*(.rodata.*)} ${RELOCATING+*(.gnu.linkonce.r.*)} }"
-SBSS2=".sbss2 ${RELOCATING-0} : { *(.sbss2) ${RELOCATING+*(.sbss2.*)} ${RELOCATING+*(.gnu.linkonce.sb2.*)} }"
-SDATA2=".sdata2 ${RELOCATING-0} : { *(.sdata2) ${RELOCATING+*(.sdata2.*)} ${RELOCATING+*(.gnu.linkonce.s2.*)} }"
-CTOR=".ctors ${CONSTRUCTING-0} : 
+INTERP=".interp       ${RELOCATING-0} : { *(.interp) }"
+PLT=".plt          ${RELOCATING-0} : { *(.plt) }"
+DYNAMIC=".dynamic      ${RELOCATING-0} : { *(.dynamic) }"
+RODATA=".rodata       ${RELOCATING-0} : { *(.rodata${RELOCATING+ .rodata.* .gnu.linkonce.r.*}) }"
+SBSS2=".sbss2        ${RELOCATING-0} : { *(.sbss2${RELOCATING+ .sbss2.* .gnu.linkonce.sb2.*}) }"
+SDATA2=".sdata2       ${RELOCATING-0} : { *(.sdata2${RELOCATING+ .sdata2.* .gnu.linkonce.s2.*}) }"
+CTOR=".ctors        ${CONSTRUCTING-0} : 
   {
     ${CONSTRUCTING+${CTOR_START}}
     /* gcc uses crtbegin.o to find the start of
@@ -96,8 +99,7 @@ CTOR=".ctors ${CONSTRUCTING-0} :
     KEEP (*(.ctors))
     ${CONSTRUCTING+${CTOR_END}}
   }"
-
-DTOR=" .dtors       ${CONSTRUCTING-0} :
+DTOR=".dtors        ${CONSTRUCTING-0} :
   {
     ${CONSTRUCTING+${DTOR_START}}
     KEEP (*crtbegin.o(.dtors))
@@ -106,6 +108,11 @@ DTOR=" .dtors       ${CONSTRUCTING-0} :
     KEEP (*(.dtors))
     ${CONSTRUCTING+${DTOR_END}}
   }"
+STACK="  .stack        ${RELOCATING-0}${RELOCATING+${STACK_ADDR}} :
+  {
+    ${RELOCATING+_stack = .;}
+    *(.stack)
+  }"
 
 # if this is for an embedded system, don't add SIZEOF_HEADERS.
 if [ -z "$EMBEDDED" ]; then
@@ -138,12 +145,12 @@ SECTIONS
   ${CREATE_SHLIB-${INTERP}}
   ${INITIAL_READONLY_SECTIONS}
   ${TEXT_DYNAMIC+${DYNAMIC}}
-  .hash        ${RELOCATING-0} : { *(.hash)		}
-  .dynsym      ${RELOCATING-0} : { *(.dynsym)		}
-  .dynstr      ${RELOCATING-0} : { *(.dynstr)		}
-  .gnu.version ${RELOCATING-0} : { *(.gnu.version)	}
-  .gnu.version_d ${RELOCATING-0} : { *(.gnu.version_d)	}
-  .gnu.version_r ${RELOCATING-0} : { *(.gnu.version_r)	}
+  .hash         ${RELOCATING-0} : { *(.hash) }
+  .dynsym       ${RELOCATING-0} : { *(.dynsym) }
+  .dynstr       ${RELOCATING-0} : { *(.dynstr) }
+  .gnu.version  ${RELOCATING-0} : { *(.gnu.version) }
+  .gnu.version_d ${RELOCATING-0}: { *(.gnu.version_d) }
+  .gnu.version_r ${RELOCATING-0}: { *(.gnu.version_r) }
 
 EOF
 if [ "x$COMBRELOC" = x ]; then
@@ -152,124 +159,44 @@ else
   COMBRELOCCAT="cat > $COMBRELOC"
 fi
 eval $COMBRELOCCAT <<EOF
-  .rel.init    ${RELOCATING-0} : { *(.rel.init)	}
-  .rela.init   ${RELOCATING-0} : { *(.rela.init)	}
-  .rel.text    ${RELOCATING-0} :
-    {
-      *(.rel.text)
-      ${RELOCATING+*(.rel.text.*)}
-      ${RELOCATING+*(.rel.gnu.linkonce.t.*)}
-    }
-  .rela.text   ${RELOCATING-0} :
-    {
-      *(.rela.text)
-      ${RELOCATING+*(.rela.text.*)}
-      ${RELOCATING+*(.rela.gnu.linkonce.t.*)}
-    }
-  .rel.fini    ${RELOCATING-0} : { *(.rel.fini)	}
-  .rela.fini   ${RELOCATING-0} : { *(.rela.fini)	}
-  .rel.rodata  ${RELOCATING-0} :
-    {
-      *(.rel.rodata)
-      ${RELOCATING+*(.rel.rodata.*)}
-      ${RELOCATING+*(.rel.gnu.linkonce.r.*)}
-    }
-  .rela.rodata ${RELOCATING-0} :
-    {
-      *(.rela.rodata)
-      ${RELOCATING+*(.rela.rodata.*)}
-      ${RELOCATING+*(.rela.gnu.linkonce.r.*)}
-    }
+  .rel.init     ${RELOCATING-0} : { *(.rel.init) }
+  .rela.init    ${RELOCATING-0} : { *(.rela.init) }
+  .rel.text     ${RELOCATING-0} : { *(.rel.text${RELOCATING+ .rel.text.* .rel.gnu.linkonce.t.*}) }
+  .rela.text    ${RELOCATING-0} : { *(.rela.text${RELOCATING+ .rela.text.* .rela.gnu.linkonce.t.*}) }
+  .rel.fini     ${RELOCATING-0} : { *(.rel.fini) }
+  .rela.fini    ${RELOCATING-0} : { *(.rela.fini) }
+  .rel.rodata   ${RELOCATING-0} : { *(.rel.rodata${RELOCATING+ .rel.rodata.* .rel.gnu.linkonce.r.*}) }
+  .rela.rodata  ${RELOCATING-0} : { *(.rela.rodata${RELOCATING+ .rela.rodata.* .rela.gnu.linkonce.r.*}) }
   ${OTHER_READONLY_RELOC_SECTIONS}
-  .rel.data    ${RELOCATING-0} :
-    {
-      *(.rel.data)
-      ${RELOCATING+*(.rel.data.*)}
-      ${RELOCATING+*(.rel.gnu.linkonce.d.*)}
-    }
-  .rela.data   ${RELOCATING-0} :
-    {
-      *(.rela.data)
-      ${RELOCATING+*(.rela.data.*)}
-      ${RELOCATING+*(.rela.gnu.linkonce.d.*)}
-    }
-  .rel.ctors   ${RELOCATING-0} : { *(.rel.ctors)	}
-  .rela.ctors  ${RELOCATING-0} : { *(.rela.ctors)	}
-  .rel.dtors   ${RELOCATING-0} : { *(.rel.dtors)	}
-  .rela.dtors  ${RELOCATING-0} : { *(.rela.dtors)	}
-  .rel.got     ${RELOCATING-0} : { *(.rel.got)		}
-  .rela.got    ${RELOCATING-0} : { *(.rela.got)		}
+  .rel.data     ${RELOCATING-0} : { *(.rel.data${RELOCATING+ .rel.data.* .rel.gnu.linkonce.d.*}) }
+  .rela.data    ${RELOCATING-0} : { *(.rela.data${RELOCATING+ .rela.data.* .rela.gnu.linkonce.d.*}) }
+  .rel.ctors    ${RELOCATING-0} : { *(.rel.ctors) }
+  .rela.ctors   ${RELOCATING-0} : { *(.rela.ctors) }
+  .rel.dtors    ${RELOCATING-0} : { *(.rel.dtors) }
+  .rela.dtors   ${RELOCATING-0} : { *(.rela.dtors) }
+  .rel.got      ${RELOCATING-0} : { *(.rel.got) }
+  .rela.got     ${RELOCATING-0} : { *(.rela.got) }
   ${OTHER_GOT_RELOC_SECTIONS}
-  .rel.sdata   ${RELOCATING-0} :
-    {
-      *(.rel.sdata)
-      ${RELOCATING+*(.rel.sdata.*)}
-      ${RELOCATING+*(.rel.gnu.linkonce.s.*)}
-    }
-  .rela.sdata   ${RELOCATING-0} :
-    {
-      *(.rela.sdata)
-      ${RELOCATING+*(.rela.sdata.*)}
-      ${RELOCATING+*(.rela.gnu.linkonce.s.*)}
-    }
-  .rel.sbss    ${RELOCATING-0} :
-    { 
-      *(.rel.sbss)
-      ${RELOCATING+*(.rel.sbss.*)}
-      ${RELOCATING+*(.rel.gnu.linkonce.sb.*)}
-    }
-  .rela.sbss   ${RELOCATING-0} :
-    {
-      *(.rela.sbss)
-      ${RELOCATING+*(.rela.sbss.*)}
-      ${RELOCATING+*(.rela.gnu.linkonce.sb.*)}
-    }
-  .rel.sdata2  ${RELOCATING-0} : 
-    { 
-      *(.rel.sdata2)
-      ${RELOCATING+*(.rel.sdata2.*)}
-      ${RELOCATING+*(.rel.gnu.linkonce.s2.*)}
-    }
-  .rela.sdata2 ${RELOCATING-0} : 
-    {
-      *(.rela.sdata2)
-      ${RELOCATING+*(.rela.sdata2.*)}
-      ${RELOCATING+*(.rela.gnu.linkonce.s2.*)}
-    }
-  .rel.sbss2   ${RELOCATING-0} : 
-    { 
-      *(.rel.sbss2)	
-      ${RELOCATING+*(.rel.sbss2.*)}
-      ${RELOCATING+*(.rel.gnu.linkonce.sb2.*)}
-    }
-  .rela.sbss2  ${RELOCATING-0} : 
-    { 
-      *(.rela.sbss2)	
-      ${RELOCATING+*(.rela.sbss2.*)}
-      ${RELOCATING+*(.rela.gnu.linkonce.sb2.*)}
-    }
-  .rel.bss     ${RELOCATING-0} : 
-    { 
-      *(.rel.bss)
-      ${RELOCATING+*(.rel.bss.*)}
-      ${RELOCATING+*(.rel.gnu.linkonce.b.*)}
-    }
-  .rela.bss    ${RELOCATING-0} : 
-    { 
-      *(.rela.bss)
-      ${RELOCATING+*(.rela.bss.*)}
-      ${RELOCATING+*(.rela.gnu.linkonce.b.*)}
-    }
+  .rel.sdata    ${RELOCATING-0} : { *(.rel.sdata${RELOCATING+ .rel.sdata.* .rel.gnu.linkonce.s.*}) }
+  .rela.sdata   ${RELOCATING-0} : { *(.rela.sdata${RELOCATING+ .rela.sdata.* .rela.gnu.linkonce.s.*}) }
+  .rel.sbss     ${RELOCATING-0} : { *(.rel.sbss${RELOCATING+ .rel.sbss.* .rel.gnu.linkonce.sb.*}) }
+  .rela.sbss    ${RELOCATING-0} : { *(.rela.sbss${RELOCATING+ .rela.sbss.* .rela.gnu.linkonce.sb.*}) }
+  .rel.sdata2   ${RELOCATING-0} : { *(.rel.sdata2${RELOCATING+ .rel.sdata2.* .rel.gnu.linkonce.s2.*}) }
+  .rela.sdata2  ${RELOCATING-0} : { *(.rela.sdata2${RELOCATING+ .rela.sdata2.* .rela.gnu.linkonce.s2.*}) }
+  .rel.sbss2    ${RELOCATING-0} : { *(.rel.sbss2${RELOCATING+ .rel.sbss2.* .rel.gnu.linkonce.sb2.*}) }
+  .rela.sbss2   ${RELOCATING-0} : { *(.rela.sbss2${RELOCATING+ .rela.sbss2.* .rela.gnu.linkonce.sb2.*}) }
+  .rel.bss      ${RELOCATING-0} : { *(.rel.bss${RELOCATING+ .rel.bss.* .rel.gnu.linkonce.b.*}) }
+  .rela.bss     ${RELOCATING-0} : { *(.rela.bss${RELOCATING+ .rela.bss.* .rela.gnu.linkonce.b.*}) }
 EOF
 if [ -n "$COMBRELOC" ]; then
 cat <<EOF
-  .rel.dyn	 :
+  .rel.dyn      ${RELOCATING-0} :
     {
 EOF
 sed -e '/^[ 	]*[{}][ 	]*$/d;/:[ 	]*$/d;/\.rela\./d;s/^.*: { *\(.*\)}$/      \1/' $COMBRELOC
 cat <<EOF
     }
-  .rela.dyn	 :
+  .rela.dyn     ${RELOCATING-0} :
     {
 EOF
 sed -e '/^[ 	]*[{}][ 	]*$/d;/:[ 	]*$/d;/\.rel\./d;s/^.*: { *\(.*\)}/      \1/' $COMBRELOC
@@ -278,11 +205,11 @@ cat <<EOF
 EOF
 fi
 cat <<EOF
-  .rel.plt     ${RELOCATING-0} : { *(.rel.plt)		}
-  .rela.plt    ${RELOCATING-0} : { *(.rela.plt)		}
+  .rel.plt      ${RELOCATING-0} : { *(.rel.plt) }
+  .rela.plt     ${RELOCATING-0} : { *(.rela.plt) }
   ${OTHER_PLT_RELOC_SECTIONS}
 
-  .init        ${RELOCATING-0} : 
+  .init         ${RELOCATING-0} : 
   { 
     ${RELOCATING+${INIT_START}}
     KEEP (*(.init))
@@ -290,18 +217,15 @@ cat <<EOF
   } =${NOP-0}
 
   ${DATA_PLT-${BSS_PLT-${PLT}}}
-  .text    ${RELOCATING-0} :
+  .text         ${RELOCATING-0} :
   {
     ${RELOCATING+${TEXT_START_SYMBOLS}}
-    *(.text)
-    ${RELOCATING+*(.text.*)}
-    *(.stub)
+    *(.text .stub${RELOCATING+ .text.* .gnu.linkonce.t.*})
     /* .gnu.warning sections are handled specially by elf32.em.  */
     *(.gnu.warning)
-    ${RELOCATING+*(.gnu.linkonce.t.*)}
     ${RELOCATING+${OTHER_TEXT_SECTIONS}}
   } =${NOP-0}
-  .fini    ${RELOCATING-0} :
+  .fini         ${RELOCATING-0} :
   {
     ${RELOCATING+${FINI_START}}
     KEEP (*(.fini))
@@ -311,94 +235,86 @@ cat <<EOF
   ${RELOCATING+PROVIDE (_etext = .);}
   ${RELOCATING+PROVIDE (etext = .);}
   ${WRITABLE_RODATA-${RODATA}}
-  .rodata1 ${RELOCATING-0} : { *(.rodata1) }
+  .rodata1      ${RELOCATING-0} : { *(.rodata1) }
   ${CREATE_SHLIB-${SDATA2}}
   ${CREATE_SHLIB-${SBSS2}}
-  ${RELOCATING+${OTHER_READONLY_SECTIONS}}
+  ${OTHER_READONLY_SECTIONS}
 
   /* Adjust the address for the data segment.  We want to adjust up to
      the same address within the page on the next page up.  */
   ${CREATE_SHLIB-${RELOCATING+. = ${DATA_ADDR-ALIGN(${MAXPAGESIZE}) + (. & (${MAXPAGESIZE} - 1))};}}
   ${CREATE_SHLIB+${RELOCATING+. = ${SHLIB_DATA_ADDR-ALIGN(${MAXPAGESIZE}) + (. & (${MAXPAGESIZE} - 1))};}}
 
-  .data  ${RELOCATING-0} :
+  .data         ${RELOCATING-0} :
   {
     ${RELOCATING+${DATA_START_SYMBOLS}}
-    *(.data)
-    ${RELOCATING+*(.data.*)}
-    ${RELOCATING+*(.gnu.linkonce.d.*)}
+    *(.data${RELOCATING+ .data.* .gnu.linkonce.d.*})
     ${CONSTRUCTING+SORT(CONSTRUCTORS)}
   }
-  .data1 ${RELOCATING-0} : { *(.data1) }
-  .eh_frame : { KEEP (*(.eh_frame)) }
-  .gcc_except_table : { *(.gcc_except_table) }
+  .data1        ${RELOCATING-0} : { *(.data1) }
+  .eh_frame     ${RELOCATING-0} : { KEEP (*(.eh_frame)) }
+  .gcc_except_table ${RELOCATING-0} : { *(.gcc_except_table) }
   ${WRITABLE_RODATA+${RODATA}}
-  ${RELOCATING+${OTHER_READWRITE_SECTIONS}}
+  ${OTHER_READWRITE_SECTIONS}
   ${TEXT_DYNAMIC-${DYNAMIC}}
   ${RELOCATING+${CTOR}}
   ${RELOCATING+${DTOR}}
-  .jcr : { KEEP (*(.jcr)) }
+  .jcr          ${RELOCATING-0} : { KEEP (*(.jcr)) }
   ${DATA_PLT+${PLT}}
   ${RELOCATING+${OTHER_GOT_SYMBOLS}}
-  .got		${RELOCATING-0} : { *(.got.plt) *(.got) }
-  ${RELOCATING+${OTHER_GOT_SECTIONS}}
+  .got          ${RELOCATING-0} : { *(.got.plt) *(.got) }
+  ${OTHER_GOT_SECTIONS}
   ${CREATE_SHLIB+${SDATA2}}
   ${CREATE_SHLIB+${SBSS2}}
   /* We want the small data sections together, so single-instruction offsets
      can access them all, and initialized data all before uninitialized, so
      we can shorten the on-disk segment size.  */
-  .sdata   ${RELOCATING-0} : 
+  .sdata        ${RELOCATING-0} : 
   {
     ${RELOCATING+${SDATA_START_SYMBOLS}}
-    *(.sdata) 
-    ${RELOCATING+*(.sdata.*)}
-    ${RELOCATING+*(.gnu.linkonce.s.*)}
+    *(.sdata${RELOCATING+ .sdata.* .gnu.linkonce.s.*})
   }
-  ${RELOCATING+${OTHER_SDATA_SECTIONS}}
+  ${OTHER_SDATA_SECTIONS}
   ${RELOCATING+_edata = .;}
   ${RELOCATING+PROVIDE (edata = .);}
   ${RELOCATING+__bss_start = .;}
   ${RELOCATING+${OTHER_BSS_SYMBOLS}}
-  .sbss    ${RELOCATING-0} :
+  .sbss         ${RELOCATING-0} :
   {
     ${RELOCATING+PROVIDE (__sbss_start = .);}
     ${RELOCATING+PROVIDE (___sbss_start = .);}
     *(.dynsbss)
-    *(.sbss)
-    ${RELOCATING+*(.sbss.*)}
-    ${RELOCATING+*(.gnu.linkonce.sb.*)}
+    *(.sbss${RELOCATING+ .sbss.* .gnu.linkonce.sb.*})
     *(.scommon)
     ${RELOCATING+PROVIDE (__sbss_end = .);}
     ${RELOCATING+PROVIDE (___sbss_end = .);}
   }
   ${BSS_PLT+${PLT}}
-  .bss     ${RELOCATING-0} :
+  .bss          ${RELOCATING-0} :
   {
    *(.dynbss)
-   *(.bss)
-   ${RELOCATING+*(.bss.*)}
-   ${RELOCATING+*(.gnu.linkonce.b.*)}
+   *(.bss${RELOCATING+ .bss.* .gnu.linkonce.b.*})
    *(COMMON)
    /* Align here to ensure that the .bss section occupies space up to
       _end.  Align after .bss to ensure correct alignment even if the
       .bss section disappears because there are no input sections.  */
    ${RELOCATING+. = ALIGN(${ALIGNMENT});}
   }
-  ${RELOCATING+${OTHER_BSS_SECTIONS}}
+  ${OTHER_BSS_SECTIONS}
   ${RELOCATING+. = ALIGN(${ALIGNMENT});}
   ${RELOCATING+_end = .;}
   ${RELOCATING+${OTHER_BSS_END_SYMBOLS}}
   ${RELOCATING+PROVIDE (end = .);}
 
   /* Stabs debugging sections.  */
-  .stab 0 : { *(.stab) }
-  .stabstr 0 : { *(.stabstr) }
-  .stab.excl 0 : { *(.stab.excl) }
-  .stab.exclstr 0 : { *(.stab.exclstr) }
-  .stab.index 0 : { *(.stab.index) }
+  .stab          0 : { *(.stab) }
+  .stabstr       0 : { *(.stabstr) }
+  .stab.excl     0 : { *(.stab.excl) }
+  .stab.exclstr  0 : { *(.stab.exclstr) }
+  .stab.index    0 : { *(.stab.index) }
   .stab.indexstr 0 : { *(.stab.indexstr) }
 
-  .comment 0 : { *(.comment) }
+  .comment       0 : { *(.comment) }
 
   /* DWARF debug sections.
      Symbols in the DWARF debugging sections are relative to the beginning
@@ -417,7 +333,7 @@ cat <<EOF
   .debug_pubnames 0 : { *(.debug_pubnames) }
 
   /* DWARF 2 */
-  .debug_info     0 : { *(.debug_info) *(.gnu.linkonce.wi.*) }
+  .debug_info     0 : { *(.debug_info .gnu.linkonce.wi.*) }
   .debug_abbrev   0 : { *(.debug_abbrev) }
   .debug_line     0 : { *(.debug_line) }
   .debug_frame    0 : { *(.debug_frame) }
@@ -431,9 +347,8 @@ cat <<EOF
   .debug_typenames 0 : { *(.debug_typenames) }
   .debug_varnames  0 : { *(.debug_varnames) }
 
-  ${RELOCATING+${OTHER_RELOCATING_SECTIONS}}
-
-  /* These must appear regardless of ${RELOCATING}.  */
+  ${STACK_ADDR+${STACK}}
   ${OTHER_SECTIONS}
+  ${RELOCATING+${OTHER_END_SYMBOLS}}
 }
 EOF
diff --git a/ld/scripttempl/elfi370.sc b/ld/scripttempl/elfi370.sc
index 39bf8a1..6b390fe 100644
--- a/ld/scripttempl/elfi370.sc
+++ b/ld/scripttempl/elfi370.sc
@@ -92,7 +92,7 @@ SECTIONS
   ${RELOCATING+PROVIDE (etext = .);}
   ${CREATE_SHLIB-${SDATA2}}
   ${CREATE_SHLIB-${SBSS2}}
-  ${RELOCATING+${OTHER_READONLY_SECTIONS}}
+  ${OTHER_READONLY_SECTIONS}
 
   /* Adjust the address for the data segment.  We want to adjust up to
      the same address within the page on the next page up.  It would
@@ -118,7 +118,7 @@ SECTIONS
     ${CONSTRUCTING+CONSTRUCTORS}
   }
   .data1 ${RELOCATING-0} : { *(.data1) }
-  ${RELOCATING+${OTHER_READWRITE_SECTIONS}}
+  ${OTHER_READWRITE_SECTIONS}
 
   .got1		${RELOCATING-0} : { *(.got1) }
   .dynamic	${RELOCATING-0} : { *(.dynamic) }
@@ -212,7 +212,6 @@ SECTIONS
   .debug_typenames 0 : { *(.debug_typenames) }
   .debug_varnames  0 : { *(.debug_varnames) }
 
-  /* These must appear regardless of ${RELOCATING}.  */
   ${OTHER_SECTIONS}
 }
 EOF
diff --git a/ld/scripttempl/nw.sc b/ld/scripttempl/nw.sc
index 4a0b051..3fb9bce 100644
--- a/ld/scripttempl/nw.sc
+++ b/ld/scripttempl/nw.sc
@@ -87,7 +87,7 @@ SECTIONS
   .dtors   ${RELOCATING-0} : { *(.dtors)   }
   .rodata  ${RELOCATING-0} : { *(.rodata)  }
   .rodata1 ${RELOCATING-0} : { *(.rodata1) }
-  ${RELOCATING+${OTHER_READONLY_SECTIONS}}
+  ${OTHER_READONLY_SECTIONS}
 
   /* Read-write section, merged into data segment: */
   ${RELOCATING+. = ${DATA_ADDR- ALIGN(8) + ${MAXPAGESIZE}};}
@@ -98,7 +98,7 @@ SECTIONS
     ${CONSTRUCTING+CONSTRUCTORS}
   }
   .data1 ${RELOCATING-0} : { *(.data1) }
-  ${RELOCATING+${OTHER_READWRITE_SECTIONS}}
+  ${OTHER_READWRITE_SECTIONS}
   .got         ${RELOCATING-0} : { *(.got.plt) *(.got) }
   .dynamic     ${RELOCATING-0} : { *(.dynamic) }
   ${DATA_PLT+${PLT}}
@@ -125,7 +125,6 @@ SECTIONS
   .stab 0 : { *(.stab) }
   .stabstr 0 : { *(.stabstr) }
 
-  /* These must appear regardless of ${RELOCATING}.  */
   ${OTHER_SECTIONS}
 }
 EOF