Add support for the AVR Tiny series of microcontrollers.

        * archures.c: add avrtiny architecture for avr target.
	* bfd-in2.h: Regenerate.
	* cpu-avr.c (arch_info_struct): add avrtiny arch info.
	* elf32-avr.c (elf_avr_howto_table): new relocation R_AVR_LDS_STS_16
	added for 16 bit LDS/STS instruction of avrtiny arch.
	(avr_reloc_map): reloc R_AVR_LDS_STS_16 is mapped to
	BFD_RELOC_AVR_LDS_STS_16.
	(bfd_elf_avr_final_write_processing): select machine number avrtiny arch.
	(elf32_avr_object_p): set machine number for avrtiny arch.
	* libbfd.h: Regenerate.
	* reloc.c: Add documentation for BFD_RELOC_AVR_LDS_STS_16 reloc.

         * config/tc-avr.c (mcu_types): Add avrtiny arch.
	Add avrtiny arch devices attiny4, attiny5, attiny9, attiny10, attiny20
	and attiny40.
	(md_show_usage): Add avrtiny arch in usage message.
	(avr_operand): validate and issue error for invalid register for avrtiny.
	add new reloc exp for 16 bit lds/sts instruction.
	(md_apply_fix): check 16 bit lds/sts operand for out of range and encode.
	(md_assemble): check ISA for arch and issue diagnostic.

	* include/elf/avr.h (E_AVR_MACH_AVRTINY): define avrtiny machine number.
	(R_AVR_LDS_STS_16): define 16 bit lds/sts reloc number.
	* include/opcode/avr.h (AVR_ISA_TINY): define avrtiny specific ISA.
	(AVR_ISA_2xxxa): define ISA without LPM.
	(AVR_ISA_AVRTINY): define avrtiny arch ISA.
	Add doc for contraint used in 16 bit lds/sts.
	Adjust ISA group for icall, ijmp, pop and push.
	Add 16 bit lds/sts encoding and update 32 bit lds/sts constraints.
	* opcodes/avr-dis.c (avr_operand): Handle constraint j for 16 bit lds/sts.
	(print_insn_avr): do not select opcode if insn ISA is avrtiny and machine
	is not avrtiny.

	* Makefile.am (ALL_EMULATION_SOURCES): add avrtiny emulation source.
	(eavrtiny.c): add rules for avrtiny emulation source.
	* Makefile.in: Regenerate.
	* configure.tgt: Add avrtiny to avr target emulations.
	* scripttempl/avrtiny.sc: New file.
	linker script template for avrtiny arch.
	* emulparams/avrtiny.sh: New file.
	emulation parameters for avrtiny arch.

1 files changed, 250 insertions, 0 deletions

diff --git a/ld/scripttempl/avrtiny.sc b/ld/scripttempl/avrtiny.sc
new file mode 100644
index 0000000..b3a49d1
--- /dev/null
+++ b/ld/scripttempl/avrtiny.sc
@@ -0,0 +1,250 @@
+cat <<EOF
+OUTPUT_FORMAT("${OUTPUT_FORMAT}","${OUTPUT_FORMAT}","${OUTPUT_FORMAT}")
+OUTPUT_ARCH(${ARCH})
+
+MEMORY
+{
+  text   (rx)   : ORIGIN = $TEXT_ORIGIN, LENGTH = $TEXT_LENGTH
+  data   (rw!x) : ORIGIN = $DATA_ORIGIN, LENGTH = $DATA_LENGTH
+
+  /* Provide offsets for config, lock and signature to match
+     production file format. Ignore offsets in datasheet.  */
+
+  config    (rw!x) : ORIGIN = 0x820000, LENGTH = 2
+  lock      (rw!x) : ORIGIN = 0x830000, LENGTH = 2
+  signature (rw!x) : ORIGIN = 0x840000, LENGTH = 4
+}
+
+SECTIONS
+{
+  /* Read-only sections, merged into text segment: */
+  ${TEXT_DYNAMIC+${DYNAMIC}}
+  .hash        ${RELOCATING-0} : { *(.hash)		}
+  .dynsym      ${RELOCATING-0} : { *(.dynsym)		}
+  .dynstr      ${RELOCATING-0} : { *(.dynstr)		}
+  .gnu.version ${RELOCATING-0} : { *(.gnu.version)	}
+  .gnu.version_d ${RELOCATING-0} : { *(.gnu.version_d)	}
+  .gnu.version_r ${RELOCATING-0} : { *(.gnu.version_r)	}
+
+  .rel.init    ${RELOCATING-0} : { *(.rel.init)	}
+  .rela.init   ${RELOCATING-0} : { *(.rela.init)	}
+  .rel.text    ${RELOCATING-0} :
+    {
+      *(.rel.text)
+      ${RELOCATING+*(.rel.text.*)}
+      ${RELOCATING+*(.rel.gnu.linkonce.t*)}
+    }
+  .rela.text   ${RELOCATING-0} :
+    {
+      *(.rela.text)
+      ${RELOCATING+*(.rela.text.*)}
+      ${RELOCATING+*(.rela.gnu.linkonce.t*)}
+    }
+  .rel.fini    ${RELOCATING-0} : { *(.rel.fini)	}
+  .rela.fini   ${RELOCATING-0} : { *(.rela.fini)	}
+  .rel.rodata  ${RELOCATING-0} :
+    {
+      *(.rel.rodata)
+      ${RELOCATING+*(.rel.rodata.*)}
+      ${RELOCATING+*(.rel.gnu.linkonce.r*)}
+    }
+  .rela.rodata ${RELOCATING-0} :
+    {
+      *(.rela.rodata)
+      ${RELOCATING+*(.rela.rodata.*)}
+      ${RELOCATING+*(.rela.gnu.linkonce.r*)}
+    }
+  .rel.data    ${RELOCATING-0} :
+    {
+      *(.rel.data)
+      ${RELOCATING+*(.rel.data.*)}
+      ${RELOCATING+*(.rel.gnu.linkonce.d*)}
+    }
+  .rela.data   ${RELOCATING-0} :
+    {
+      *(.rela.data)
+      ${RELOCATING+*(.rela.data.*)}
+      ${RELOCATING+*(.rela.gnu.linkonce.d*)}
+    }
+  .rel.ctors   ${RELOCATING-0} : { *(.rel.ctors)	}
+  .rela.ctors  ${RELOCATING-0} : { *(.rela.ctors)	}
+  .rel.dtors   ${RELOCATING-0} : { *(.rel.dtors)	}
+  .rela.dtors  ${RELOCATING-0} : { *(.rela.dtors)	}
+  .rel.got     ${RELOCATING-0} : { *(.rel.got)		}
+  .rela.got    ${RELOCATING-0} : { *(.rela.got)	}
+  .rel.bss     ${RELOCATING-0} : { *(.rel.bss)		}
+  .rela.bss    ${RELOCATING-0} : { *(.rela.bss)	}
+  .rel.plt     ${RELOCATING-0} : { *(.rel.plt)		}
+  .rela.plt    ${RELOCATING-0} : { *(.rela.plt)	}
+
+  /* Internal text space or external memory.  */
+  .text ${RELOCATING-0} : ${RELOCATING+ AT (0x0)}
+  {
+    *(.vectors)
+    KEEP(*(.vectors))
+
+    /* For data that needs to reside in the lower 64k of progmem.  */
+    *(.progmem.gcc*)
+    *(.progmem*)
+    ${RELOCATING+. = ALIGN(2);}
+
+    ${CONSTRUCTING+ __trampolines_start = . ; }
+    /* The jump trampolines for the 16-bit limited relocs will reside here.  */
+    *(.trampolines)
+    *(.trampolines*)
+    ${CONSTRUCTING+ __trampolines_end = . ; }
+
+    /* For future tablejump instruction arrays for 3 byte pc devices.
+       We don't relax jump/call instructions within these sections.  */
+    *(.jumptables) 
+    *(.jumptables*) 
+
+    /* For code that needs to reside in the lower 128k progmem.  */
+    *(.lowtext)
+    *(.lowtext*)
+
+    ${CONSTRUCTING+ __ctors_start = . ; }
+    ${CONSTRUCTING+ *(.ctors) }
+    ${CONSTRUCTING+ __ctors_end = . ; }
+    ${CONSTRUCTING+ __dtors_start = . ; }
+    ${CONSTRUCTING+ *(.dtors) }
+    ${CONSTRUCTING+ __dtors_end = . ; }
+    KEEP(SORT(*)(.ctors))
+    KEEP(SORT(*)(.dtors))
+
+    /* From this point on, we don't bother about wether the insns are
+       below or above the 16 bits boundary.  */
+    *(.init0)  /* Start here after reset.  */
+    KEEP (*(.init0))
+    *(.init1)
+    KEEP (*(.init1))
+    *(.init2)  /* Clear __zero_reg__, set up stack pointer.  */
+    KEEP (*(.init2))
+    *(.init3)
+    KEEP (*(.init3))
+    *(.init4)  /* Initialize data and BSS.  */
+    KEEP (*(.init4))
+    *(.init5)
+    KEEP (*(.init5))
+    *(.init6)  /* C++ constructors.  */
+    KEEP (*(.init6))
+    *(.init7)
+    KEEP (*(.init7))
+    *(.init8)
+    KEEP (*(.init8))
+    *(.init9)  /* Call main().  */
+    KEEP (*(.init9))
+    *(.text)
+    ${RELOCATING+. = ALIGN(2);}
+    *(.text.*)
+    ${RELOCATING+. = ALIGN(2);}
+    *(.fini9)  /* _exit() starts here.  */
+    KEEP (*(.fini9))
+    *(.fini8)
+    KEEP (*(.fini8))
+    *(.fini7)
+    KEEP (*(.fini7))
+    *(.fini6)  /* C++ destructors.  */
+    KEEP (*(.fini6))
+    *(.fini5)
+    KEEP (*(.fini5))
+    *(.fini4)
+    KEEP (*(.fini4))
+    *(.fini3)
+    KEEP (*(.fini3))
+    *(.fini2)
+    KEEP (*(.fini2))
+    *(.fini1)
+    KEEP (*(.fini1))
+    *(.fini0)  /* Infinite loop after program termination.  */
+    KEEP (*(.fini0))
+    ${RELOCATING+ _etext = . ; }
+  } ${RELOCATING+ > text}
+
+  .data	${RELOCATING-0} : ${RELOCATING+AT (ADDR (.text) + SIZEOF (.text))}
+  {
+    ${RELOCATING+ PROVIDE (__data_start = .) ; }
+    *(.data)
+    KEEP (*(.data))
+    *(.data*)
+    *(.rodata)  /* We need to include .rodata here if gcc is used */
+    *(.rodata*) /* with -fdata-sections.  */
+    *(.gnu.linkonce.d*)
+    ${RELOCATING+. = ALIGN(2);}
+    ${RELOCATING+ _edata = . ; }
+    ${RELOCATING+ PROVIDE (__data_end = .) ; }
+  } ${RELOCATING+ > data}
+
+  .bss ${RELOCATING-0} :${RELOCATING+ AT (ADDR (.bss))}
+  {
+    ${RELOCATING+ PROVIDE (__bss_start = .) ; }
+    *(.bss)
+    *(.bss*)
+    *(COMMON)
+    ${RELOCATING+ PROVIDE (__bss_end = .) ; }
+  } ${RELOCATING+ > data}
+
+  ${RELOCATING+ __data_load_start = LOADADDR(.data); }
+  ${RELOCATING+ __data_load_end = __data_load_start + SIZEOF(.data); }
+
+  /* Global data not cleared after reset.  */
+  .noinit ${RELOCATING-0}:
+  {
+    ${RELOCATING+ PROVIDE (__noinit_start = .) ; }
+    *(.noinit*)
+    ${RELOCATING+ PROVIDE (__noinit_end = .) ; }
+    ${RELOCATING+ _end = . ;  }
+    ${RELOCATING+ PROVIDE (__heap_start = .) ; }
+  } ${RELOCATING+ > data}
+
+  .lock ${RELOCATING-0}:
+  {
+    KEEP(*(.lock*))
+  } ${RELOCATING+ > lock}
+
+  .signature ${RELOCATING-0}:
+  {
+    KEEP(*(.signature*))
+  } ${RELOCATING+ > signature}
+
+  .config ${RELOCATING-0}:
+  {
+    KEEP(*(.config*))
+  } ${RELOCATING+ > config}
+
+  /* Stabs debugging sections.  */
+  .stab 0 : { *(.stab) }
+  .stabstr 0 : { *(.stabstr) }
+  .stab.excl 0 : { *(.stab.excl) }
+  .stab.exclstr 0 : { *(.stab.exclstr) }
+  .stab.index 0 : { *(.stab.index) }
+  .stab.indexstr 0 : { *(.stab.indexstr) }
+  .comment 0 : { *(.comment) }
+ 
+  /* DWARF debug sections.
+     Symbols in the DWARF debugging sections are relative to the beginning
+     of the section so we begin them at 0.  */
+
+  /* DWARF 1 */
+  .debug          0 : { *(.debug) }
+  .line           0 : { *(.line) }
+
+  /* GNU DWARF 1 extensions */
+  .debug_srcinfo  0 : { *(.debug_srcinfo) }
+  .debug_sfnames  0 : { *(.debug_sfnames) }
+
+  /* DWARF 1.1 and DWARF 2 */
+  .debug_aranges  0 : { *(.debug_aranges) }
+  .debug_pubnames 0 : { *(.debug_pubnames) }
+
+  /* DWARF 2 */
+  .debug_info     0 : { *(.debug_info) *(.gnu.linkonce.wi.*) }
+  .debug_abbrev   0 : { *(.debug_abbrev) }
+  .debug_line     0 : { *(.debug_line) }
+  .debug_frame    0 : { *(.debug_frame) }
+  .debug_str      0 : { *(.debug_str) }
+  .debug_loc      0 : { *(.debug_loc) }
+  .debug_macinfo  0 : { *(.debug_macinfo) }
+}
+EOF
+