Add IBM 370 support.

1 files changed, 218 insertions, 0 deletions

diff --git a/ld/scripttempl/elfi370.sc b/ld/scripttempl/elfi370.sc
new file mode 100644
index 0000000..e2f0e88
--- /dev/null
+++ b/ld/scripttempl/elfi370.sc
@@ -0,0 +1,218 @@
+#
+# This is just a raw copy of elfppc.sc and has not been otherwise modified
+#
+# Unusual variables checked by this code:
+#	NOP - two byte opcode for no-op (defaults to 0)
+#	DATA_ADDR - if end-of-text-plus-one-page isn't right for data start
+#	OTHER_READONLY_SECTIONS - other than .text .init .rodata ...
+#		(e.g., .PARISC.milli)
+#	OTHER_READWRITE_SECTIONS - other than .data .bss .ctors .sdata ...
+#		(e.g., .PARISC.global)
+#	OTHER_SECTIONS - at the end
+#	EXECUTABLE_SYMBOLS - symbols that must be defined for an
+#		executable (e.g., _DYNAMIC_LINK)
+#	TEXT_START_SYMBOLS - symbols that appear at the start of the
+#		.text section.
+#	DATA_START_SYMBOLS - symbols that appear at the start of the
+#		.data section.
+#	OTHER_BSS_SYMBOLS - symbols that appear at the start of the
+#		.bss section besides __bss_start.
+#
+# When adding sections, do note that the names of some sections are used
+# when specifying the start address of the next.
+#
+test -z "$ENTRY" && ENTRY=_start
+test -z "${BIG_OUTPUT_FORMAT}" && BIG_OUTPUT_FORMAT=${OUTPUT_FORMAT}
+test -z "${LITTLE_OUTPUT_FORMAT}" && LITTLE_OUTPUT_FORMAT=${OUTPUT_FORMAT}
+test "$LD_FLAG" = "N" && DATA_ADDR=.
+SBSS2=".sbss2 ${RELOCATING-0} : { *(.sbss2) }"
+SDATA2=".sdata2 ${RELOCATING-0} : { *(.sdata2) }"
+INTERP=".interp ${RELOCATING-0} : { *(.interp) }"
+PLT=".plt ${RELOCATING-0} : { *(.plt) }"
+cat <<EOF
+OUTPUT_FORMAT("${OUTPUT_FORMAT}", "${BIG_OUTPUT_FORMAT}",
+	      "${LITTLE_OUTPUT_FORMAT}")
+OUTPUT_ARCH(${ARCH})
+ENTRY(${ENTRY})
+
+${RELOCATING+${LIB_SEARCH_DIRS}}
+${RELOCATING+/* Do we need any of these for elf?
+   __DYNAMIC = 0; ${STACKZERO+${STACKZERO}} ${SHLIB_PATH+${SHLIB_PATH}}  */}
+${RELOCATING+${EXECUTABLE_SYMBOLS}}
+${RELOCATING- /* For some reason, the Solaris linker makes bad executables
+  if gld -r is used and the intermediate file has sections starting
+  at non-zero addresses.  Could be a Solaris ld bug, could be a GNU ld
+  bug.  But for now assigning the zero vmas works.  */}
+
+${RELOCATING+PROVIDE (__stack = 0);}
+SECTIONS
+{
+  /* Read-only sections, merged into text segment: */
+  ${CREATE_SHLIB-${RELOCATING+. = ${TEXT_START_ADDR} + SIZEOF_HEADERS;}}
+  ${CREATE_SHLIB+${RELOCATING+. = SIZEOF_HEADERS;}}
+  ${CREATE_SHLIB-${INTERP}}
+  .hash		${RELOCATING-0} : { *(.hash)		}
+  .dynsym	${RELOCATING-0} : { *(.dynsym)		}
+  .dynstr	${RELOCATING-0} : { *(.dynstr)		}
+  .gnu.version ${RELOCATING-0} : { *(.gnu.version)      }
+  .gnu.version_d ${RELOCATING-0} : { *(.gnu.version_d)  }
+  .gnu.version_r ${RELOCATING-0} : { *(.gnu.version_r)  }
+  .rela.text   ${RELOCATING-0} :
+    { *(.rela.text) *(.rela.gnu.linkonce.t*) }
+  .rela.data   ${RELOCATING-0} :
+    { *(.rela.data) *(.rela.gnu.linkonce.d*) }
+  .rela.rodata ${RELOCATING-0} :
+    { *(.rela.rodata) *(.rela.gnu.linkonce.r*) }
+  .rela.got	${RELOCATING-0} : { *(.rela.got)	}
+  .rela.got1	${RELOCATING-0} : { *(.rela.got1)	}
+  .rela.got2	${RELOCATING-0} : { *(.rela.got2)	}
+  .rela.ctors	${RELOCATING-0} : { *(.rela.ctors)	}
+  .rela.dtors	${RELOCATING-0} : { *(.rela.dtors)	}
+  .rela.init	${RELOCATING-0} : { *(.rela.init)	}
+  .rela.fini	${RELOCATING-0} : { *(.rela.fini)	}
+  .rela.bss	${RELOCATING-0} : { *(.rela.bss)	}
+  .rela.plt	${RELOCATING-0} : { *(.rela.plt)	}
+  .rela.sdata	${RELOCATING-0} : { *(.rela.sdata)	}
+  .rela.sbss	${RELOCATING-0} : { *(.rela.sbss)	}
+  .rela.sdata2	${RELOCATING-0} : { *(.rela.sdata2)	}
+  .rela.sbss2	${RELOCATING-0} : { *(.rela.sbss2)	}
+  .text    ${RELOCATING-0} :
+  {
+    ${RELOCATING+${TEXT_START_SYMBOLS}}
+    *(.text)
+    /* .gnu.warning sections are handled specially by elf32.em.  */
+    *(.gnu.warning)
+    *(.gnu.linkonce.t*)
+  } =${NOP-0}
+  .init		${RELOCATING-0} : { *(.init)		} =${NOP-0}
+  .fini		${RELOCATING-0} : { *(.fini)		} =${NOP-0}
+  .rodata	${RELOCATING-0} : { *(.rodata) *(.gnu.linkonce.r*) }
+  .rodata1	${RELOCATING-0} : { *(.rodata1) }
+  ${RELOCATING+_etext = .;}
+  ${RELOCATING+PROVIDE (etext = .);}
+  ${CREATE_SHLIB-${SDATA2}}
+  ${CREATE_SHLIB-${SBSS2}}
+  ${RELOCATING+${OTHER_READONLY_SECTIONS}}
+
+  /* Adjust the address for the data segment.  We want to adjust up to
+     the same address within the page on the next page up.  It would
+     be more correct to do this:
+       ${RELOCATING+. = ${DATA_ADDR-ALIGN(${MAXPAGESIZE}) + (ALIGN(8) & (${MAXPAGESIZE} - 1))};}
+     The current expression does not correctly handle the case of a
+     text segment ending precisely at the end of a page; it causes the
+     data segment to skip a page.  The above expression does not have
+     this problem, but it will currently (2/95) cause BFD to allocate
+     a single segment, combining both text and data, for this case.
+     This will prevent the text segment from being shared among
+     multiple executions of the program; I think that is more
+     important than losing a page of the virtual address space (note
+     that no actual memory is lost; the page which is skipped can not
+     be referenced).  */
+  ${RELOCATING+. = ${DATA_ADDR- ALIGN(8) + ${MAXPAGESIZE}};}
+
+  .data  ${RELOCATING-0} :
+  {
+    ${RELOCATING+${DATA_START_SYMBOLS}}
+    *(.data)
+    *(.gnu.linkonce.d*)
+    ${CONSTRUCTING+CONSTRUCTORS}
+  }
+  .data1 ${RELOCATING-0} : { *(.data1) }
+  ${RELOCATING+${OTHER_READWRITE_SECTIONS}}
+
+  .got1		${RELOCATING-0} : { *(.got1) }
+  .dynamic	${RELOCATING-0} : { *(.dynamic) }
+
+  /* Put .ctors and .dtors next to the .got2 section, so that the pointers
+     get relocated with -mrelocatable. Also put in the .fixup pointers.
+     The current compiler no longer needs this, but keep it around for 2.7.2  */
+
+		${RELOCATING+PROVIDE (_GOT2_START_ = .);}
+  .got2		${RELOCATING-0} :  { *(.got2) }
+
+		${RELOCATING+PROVIDE (__CTOR_LIST__ = .);}
+  .ctors	${RELOCATING-0} : { *(.ctors) }
+		${RELOCATING+PROVIDE (__CTOR_END__ = .);}
+
+		${RELOCATING+PROVIDE (__DTOR_LIST__ = .);}
+  .dtors	${RELOCATING-0} : { *(.dtors) }
+		${RELOCATING+PROVIDE (__DTOR_END__ = .);}
+
+		${RELOCATING+PROVIDE (_FIXUP_START_ = .);}
+  .fixup	${RELOCATING-0} : { *(.fixup) }
+		${RELOCATING+PROVIDE (_FIXUP_END_ = .);}
+		${RELOCATING+PROVIDE (_GOT2_END_ = .);}
+
+		${RELOCATING+PROVIDE (_GOT_START_ = .);}
+  .got		${RELOCATING-0} : { *(.got) }
+  .got.plt	${RELOCATING-0} : { *(.got.plt) }
+  ${CREATE_SHLIB+${SDATA2}}
+  ${CREATE_SHLIB+${SBSS2}}
+		${RELOCATING+PROVIDE (_GOT_END_ = .);}
+
+  /* We want the small data sections together, so single-instruction offsets
+     can access them all, and initialized data all before uninitialized, so
+     we can shorten the on-disk segment size.  */
+  .sdata	${RELOCATING-0} : { *(.sdata) }
+  ${RELOCATING+_edata  =  .;}
+  ${RELOCATING+PROVIDE (edata = .);}
+  .sbss    ${RELOCATING-0} :
+  {
+    ${RELOCATING+PROVIDE (__sbss_start = .);}
+    *(.sbss)
+    *(.scommon)
+    *(.dynsbss)
+    ${RELOCATING+PROVIDE (__sbss_end = .);}
+  }
+  ${PLT}
+  .bss     ${RELOCATING-0} :
+  {
+   ${RELOCATING+${OTHER_BSS_SYMBOLS}}
+   ${RELOCATING+PROVIDE (__bss_start = .);}
+   *(.dynbss)
+   *(.bss)
+   *(COMMON)
+  }
+  ${RELOCATING+_end = . ;}
+  ${RELOCATING+PROVIDE (end = .);}
+
+  /* These are needed for ELF backends which have not yet been
+     converted to the new style linker.  */
+  .stab 0 : { *(.stab) }
+  .stabstr 0 : { *(.stabstr) }
+
+  /* DWARF debug sections.
+     Symbols in the DWARF debugging sections are relative to the beginning
+     of the section so we begin them at 0.  */
+
+  /* DWARF 1 */
+  .debug          0 : { *(.debug) }
+  .line           0 : { *(.line) }
+
+  /* GNU DWARF 1 extensions */
+  .debug_srcinfo  0 : { *(.debug_srcinfo) }
+  .debug_sfnames  0 : { *(.debug_sfnames) }
+
+  /* DWARF 1.1 and DWARF 2 */
+  .debug_aranges  0 : { *(.debug_aranges) }
+  .debug_pubnames 0 : { *(.debug_pubnames) }
+
+  /* DWARF 2 */
+  .debug_info     0 : { *(.debug_info) }
+  .debug_abbrev   0 : { *(.debug_abbrev) }
+  .debug_line     0 : { *(.debug_line) }
+  .debug_frame    0 : { *(.debug_frame) }
+  .debug_str      0 : { *(.debug_str) }
+  .debug_loc      0 : { *(.debug_loc) }
+  .debug_macinfo  0 : { *(.debug_macinfo) }
+
+  /* SGI/MIPS DWARF 2 extensions */
+  .debug_weaknames 0 : { *(.debug_weaknames) }
+  .debug_funcnames 0 : { *(.debug_funcnames) }
+  .debug_typenames 0 : { *(.debug_typenames) }
+  .debug_varnames  0 : { *(.debug_varnames) }
+
+  /* These must appear regardless of ${RELOCATING}.  */
+  ${OTHER_SECTIONS}
+}
+EOF