* configure.tgt: Only use elf64hppa target emulation for hpux.

	* emulparams/elf64hppa.sh: Don't include hppa64linux.sh.
	(SCRIPT_NAME): Use new script elf64hppa.
	(SCRIPT_NAME, ELFSIZE, NO_REL_RELOCS, ARCH, MACHINE, ENTRY,
	TEMPLATE_NAME, GENERATE_SHLIB_SCRIPT, OTHER_READONLY_SECTIONS,
	OTHER_READWRITE_SECTIONS, OTHER_BSS_SECTIONS, OTHER_GOT_RELOC_SECTIONS,
	DATA_START_SYMBOLS, OTHER_SYMBOLS, DATA_PLT, PLT_BEFORE_GOT,
	TEXT_DYNAMIC): Define.
	* emulparams/hppa64linux.sh: Adjust comments.
	* scripttempl/elf64hppa.sc: New file.

1 files changed, 574 insertions, 0 deletions

diff --git a/ld/scripttempl/elf64hppa.sc b/ld/scripttempl/elf64hppa.sc
new file mode 100644
index 0000000..bb1d7b3
--- /dev/null
+++ b/ld/scripttempl/elf64hppa.sc
@@ -0,0 +1,574 @@
+#
+# Unusual variables checked by this code:
+#	NOP - four byte opcode for no-op (defaults to 0)
+#	NO_SMALL_DATA - no .sbss/.sbss2/.sdata/.sdata2 sections if not
+#		empty.
+#	SMALL_DATA_CTOR - .ctors contains small data.
+#	SMALL_DATA_DTOR - .dtors contains small data.
+#	DATA_ADDR - if end-of-text-plus-one-page isn't right for data start
+#	INITIAL_READONLY_SECTIONS - at start of text segment
+#	OTHER_READONLY_SECTIONS - other than .text .init .rodata ...
+#		(e.g., .PARISC.milli)
+#	OTHER_TEXT_SECTIONS - these get put in .text when relocating
+#	OTHER_READWRITE_SECTIONS - other than .data .bss .ctors .sdata ...
+#		(e.g., .PARISC.global)
+#	OTHER_RELRO_SECTIONS - other than .data.rel.ro ...
+#		(e.g. PPC32 .fixup, .got[12])
+#	OTHER_BSS_SECTIONS - other than .bss .sbss ...
+#	ATTRS_SECTIONS - at the end
+#	OTHER_SECTIONS - at the end
+#	EXECUTABLE_SYMBOLS - symbols that must be defined for an
+#		executable (e.g., _DYNAMIC_LINK)
+#       TEXT_START_ADDR - the first byte of the text segment, after any
+#               headers.
+#       TEXT_BASE_ADDRESS - the first byte of the text segment.
+#	TEXT_START_SYMBOLS - symbols that appear at the start of the
+#		.text section.
+#	DATA_START_SYMBOLS - symbols that appear at the start of the
+#		.data section.
+#	DATA_END_SYMBOLS - symbols that appear at the end of the
+#		writeable data sections.
+#	OTHER_GOT_SYMBOLS - symbols defined just before .got.
+#	OTHER_GOT_SECTIONS - sections just after .got.
+#	OTHER_SDATA_SECTIONS - sections just after .sdata.
+#	OTHER_BSS_SYMBOLS - symbols that appear at the start of the
+#		.bss section besides __bss_start.
+#	DATA_PLT - .plt should be in data segment, not text segment.
+#	PLT_BEFORE_GOT - .plt just before .got when .plt is in data segement.
+#	BSS_PLT - .plt should be in bss segment
+#	NO_REL_RELOCS - Don't include .rel.* sections in script
+#	NO_RELA_RELOCS - Don't include .rela.* sections in script
+#	NON_ALLOC_DYN - Place dynamic sections after data segment.
+#	TEXT_DYNAMIC - .dynamic in text segment, not data segment.
+#	EMBEDDED - whether this is for an embedded system. 
+#	SHLIB_TEXT_START_ADDR - if set, add to SIZEOF_HEADERS to set
+#		start address of shared library.
+#	INPUT_FILES - INPUT command of files to always include
+#	WRITABLE_RODATA - if set, the .rodata section should be writable
+#	INIT_START, INIT_END -  statements just before and just after
+# 	combination of .init sections.
+#	FINI_START, FINI_END - statements just before and just after
+# 	combination of .fini sections.
+#	STACK_ADDR - start of a .stack section.
+#	OTHER_SYMBOLS - symbols to place right at the end of the script.
+#	ETEXT_NAME - name of a symbol for the end of the text section,
+#		normally etext.
+#	SEPARATE_GOTPLT - if set, .got.plt should be separate output section,
+#		so that .got can be in the RELRO area.  It should be set to
+#		the number of bytes in the beginning of .got.plt which can be
+#		in the RELRO area as well.
+#	USER_LABEL_PREFIX - prefix to add to user-visible symbols.
+#
+# When adding sections, do note that the names of some sections are used
+# when specifying the start address of the next.
+#
+
+#  Many sections come in three flavours.  There is the 'real' section,
+#  like ".data".  Then there are the per-procedure or per-variable
+#  sections, generated by -ffunction-sections and -fdata-sections in GCC,
+#  and useful for --gc-sections, which for a variable "foo" might be
+#  ".data.foo".  Then there are the linkonce sections, for which the linker
+#  eliminates duplicates, which are named like ".gnu.linkonce.d.foo".
+#  The exact correspondences are:
+#
+#  Section	Linkonce section
+#  .text	.gnu.linkonce.t.foo
+#  .rodata	.gnu.linkonce.r.foo
+#  .data	.gnu.linkonce.d.foo
+#  .bss		.gnu.linkonce.b.foo
+#  .sdata	.gnu.linkonce.s.foo
+#  .sbss	.gnu.linkonce.sb.foo
+#  .sdata2	.gnu.linkonce.s2.foo
+#  .sbss2	.gnu.linkonce.sb2.foo
+#  .debug_info	.gnu.linkonce.wi.foo
+#  .tdata	.gnu.linkonce.td.foo
+#  .tbss	.gnu.linkonce.tb.foo
+#  .lrodata	.gnu.linkonce.lr.foo
+#  .ldata	.gnu.linkonce.l.foo
+#  .lbss	.gnu.linkonce.lb.foo
+#
+#  Each of these can also have corresponding .rel.* and .rela.* sections.
+
+test -z "$ENTRY" && ENTRY=_start
+test -z "${BIG_OUTPUT_FORMAT}" && BIG_OUTPUT_FORMAT=${OUTPUT_FORMAT}
+test -z "${LITTLE_OUTPUT_FORMAT}" && LITTLE_OUTPUT_FORMAT=${OUTPUT_FORMAT}
+if [ -z "$MACHINE" ]; then OUTPUT_ARCH=${ARCH}; else OUTPUT_ARCH=${ARCH}:${MACHINE}; fi
+test -z "${ELFSIZE}" && ELFSIZE=32
+test -z "${ALIGNMENT}" && ALIGNMENT="${ELFSIZE} / 8"
+test "$LD_FLAG" = "N" && DATA_ADDR=.
+test -z "${ETEXT_NAME}" && ETEXT_NAME=etext
+test -n "$CREATE_SHLIB$CREATE_PIE" && test -n "$SHLIB_DATA_ADDR" && COMMONPAGESIZE=""
+test -z "$CREATE_SHLIB$CREATE_PIE" && test -n "$DATA_ADDR" && COMMONPAGESIZE=""
+test -n "$RELRO_NOW" && unset SEPARATE_GOTPLT
+test -z "$ATTRS_SECTIONS" && ATTRS_SECTIONS=".gnu.attributes 0 : { KEEP (*(.gnu.attributes)) }"
+DATA_SEGMENT_ALIGN="ALIGN(${SEGMENT_SIZE}) + (. & (${MAXPAGESIZE} - 1))"
+DATA_SEGMENT_RELRO_END=""
+DATA_SEGMENT_END=""
+if test -n "${COMMONPAGESIZE}"; then
+  DATA_SEGMENT_ALIGN="ALIGN (${SEGMENT_SIZE}) - ((${MAXPAGESIZE} - .) & (${MAXPAGESIZE} - 1)); . = DATA_SEGMENT_ALIGN (${MAXPAGESIZE}, ${COMMONPAGESIZE})"
+  DATA_SEGMENT_END=". = DATA_SEGMENT_END (.);"
+  DATA_SEGMENT_RELRO_END=". = DATA_SEGMENT_RELRO_END (${SEPARATE_GOTPLT-0}, .);"
+fi
+if test -z "${INITIAL_READONLY_SECTIONS}${CREATE_SHLIB}"; then
+  INITIAL_READONLY_SECTIONS=".interp       ${RELOCATING-0} : { *(.interp) }"
+fi
+if test -z "$PLT"; then
+  PLT=".plt          ${RELOCATING-0} : { *(.plt) }"
+fi
+test -n "${DATA_PLT-${BSS_PLT-text}}" && TEXT_PLT=yes
+if test -z "$GOT"; then
+  if test -z "$SEPARATE_GOTPLT"; then
+    GOT=".got          ${RELOCATING-0} : { *(.got.plt) *(.got) }"
+  else
+    GOT=".got          ${RELOCATING-0} : { *(.got) }"
+    GOTPLT=".got.plt      ${RELOCATING-0} : { *(.got.plt) }"
+  fi
+fi
+DYNAMIC=".dynamic      ${RELOCATING-0} : { *(.dynamic) }"
+RODATA=".rodata       ${RELOCATING-0} : { *(.rodata${RELOCATING+ .rodata.* .gnu.linkonce.r.*}) }"
+DATARELRO=".data.rel.ro : { *(.data.rel.ro.local* .gnu.linkonce.d.rel.ro.local.*) *(.data.rel.ro* .gnu.linkonce.d.rel.ro.*) }"
+DISCARDED="/DISCARD/ : { *(.note.GNU-stack) *(.gnu_debuglink) }"
+if test -z "${NO_SMALL_DATA}"; then
+  SBSS=".sbss         ${RELOCATING-0} :
+  {
+    ${RELOCATING+${SBSS_START_SYMBOLS}}
+    ${CREATE_SHLIB+*(.sbss2 .sbss2.* .gnu.linkonce.sb2.*)}
+    *(.dynsbss)
+    *(.sbss${RELOCATING+ .sbss.* .gnu.linkonce.sb.*})
+    *(.scommon)
+    ${RELOCATING+${SBSS_END_SYMBOLS}}
+  }"
+  SBSS2=".sbss2        ${RELOCATING-0} : { *(.sbss2${RELOCATING+ .sbss2.* .gnu.linkonce.sb2.*}) }"
+  SDATA="/* We want the small data sections together, so single-instruction offsets
+     can access them all, and initialized data all before uninitialized, so
+     we can shorten the on-disk segment size.  */
+  .sdata        ${RELOCATING-0} : 
+  {
+    ${RELOCATING+${SDATA_START_SYMBOLS}}
+    ${CREATE_SHLIB+*(.sdata2 .sdata2.* .gnu.linkonce.s2.*)}
+    *(.sdata${RELOCATING+ .sdata.* .gnu.linkonce.s.*})
+  }"
+  SDATA2=".sdata2       ${RELOCATING-0} :
+  {
+    ${RELOCATING+${SDATA2_START_SYMBOLS}}
+    *(.sdata2${RELOCATING+ .sdata2.* .gnu.linkonce.s2.*})
+  }"
+  REL_SDATA=".rel.sdata    ${RELOCATING-0} : { *(.rel.sdata${RELOCATING+ .rel.sdata.* .rel.gnu.linkonce.s.*}) }
+  .rela.sdata   ${RELOCATING-0} : { *(.rela.sdata${RELOCATING+ .rela.sdata.* .rela.gnu.linkonce.s.*}) }"
+  REL_SBSS=".rel.sbss     ${RELOCATING-0} : { *(.rel.sbss${RELOCATING+ .rel.sbss.* .rel.gnu.linkonce.sb.*}) }
+  .rela.sbss    ${RELOCATING-0} : { *(.rela.sbss${RELOCATING+ .rela.sbss.* .rela.gnu.linkonce.sb.*}) }"
+  REL_SDATA2=".rel.sdata2   ${RELOCATING-0} : { *(.rel.sdata2${RELOCATING+ .rel.sdata2.* .rel.gnu.linkonce.s2.*}) }
+  .rela.sdata2  ${RELOCATING-0} : { *(.rela.sdata2${RELOCATING+ .rela.sdata2.* .rela.gnu.linkonce.s2.*}) }"
+  REL_SBSS2=".rel.sbss2    ${RELOCATING-0} : { *(.rel.sbss2${RELOCATING+ .rel.sbss2.* .rel.gnu.linkonce.sb2.*}) }
+  .rela.sbss2   ${RELOCATING-0} : { *(.rela.sbss2${RELOCATING+ .rela.sbss2.* .rela.gnu.linkonce.sb2.*}) }"
+else
+  NO_SMALL_DATA=" "
+fi
+if test -z "${DATA_GOT}"; then
+  if test -n "${NO_SMALL_DATA}"; then
+    DATA_GOT=" "
+  fi
+fi
+if test -z "${SDATA_GOT}"; then
+  if test -z "${NO_SMALL_DATA}"; then
+    SDATA_GOT=" "
+  fi
+fi
+test -n "$SEPARATE_GOTPLT" && SEPARATE_GOTPLT=" "
+test "${LARGE_SECTIONS}" = "yes" && REL_LARGE="
+  .rel.ldata    ${RELOCATING-0} : { *(.rel.ldata${RELOCATING+ .rel.ldata.* .rel.gnu.linkonce.l.*}) }
+  .rela.ldata   ${RELOCATING-0} : { *(.rela.ldata${RELOCATING+ .rela.ldata.* .rela.gnu.linkonce.l.*}) }
+  .rel.lbss     ${RELOCATING-0} : { *(.rel.lbss${RELOCATING+ .rel.lbss.* .rel.gnu.linkonce.lb.*}) }
+  .rela.lbss    ${RELOCATING-0} : { *(.rela.lbss${RELOCATING+ .rela.lbss.* .rela.gnu.linkonce.lb.*}) }
+  .rel.lrodata  ${RELOCATING-0} : { *(.rel.lrodata${RELOCATING+ .rel.lrodata.* .rel.gnu.linkonce.lr.*}) }
+  .rela.lrodata ${RELOCATING-0} : { *(.rela.lrodata${RELOCATING+ .rela.lrodata.* .rela.gnu.linkonce.lr.*}) }"
+test "${LARGE_SECTIONS}" = "yes" && OTHER_BSS_SECTIONS="
+  ${OTHER_BSS_SECTIONS}
+  .lbss ${RELOCATING-0} :
+  {
+    *(.dynlbss)
+    *(.lbss${RELOCATING+ .lbss.* .gnu.linkonce.lb.*})
+    *(LARGE_COMMON)
+  }"
+test "${LARGE_SECTIONS}" = "yes" && LARGE_SECTIONS="
+  .lrodata ${RELOCATING-0} ${RELOCATING+ALIGN(${MAXPAGESIZE}) + (. & (${MAXPAGESIZE} - 1))} :
+  {
+    *(.lrodata${RELOCATING+ .lrodata.* .gnu.linkonce.lr.*})
+  }
+  .ldata ${RELOCATING-0} ${RELOCATING+ALIGN(${MAXPAGESIZE}) + (. & (${MAXPAGESIZE} - 1))} :
+  {
+    *(.ldata${RELOCATING+ .ldata.* .gnu.linkonce.l.*})
+    ${RELOCATING+. = ALIGN(. != 0 ? ${ALIGNMENT} : 1);}
+  }"
+CTOR=".ctors        ${CONSTRUCTING-0} : 
+  {
+    ${CONSTRUCTING+${CTOR_START}}
+    /* gcc uses crtbegin.o to find the start of
+       the constructors, so we make sure it is
+       first.  Because this is a wildcard, it
+       doesn't matter if the user does not
+       actually link against crtbegin.o; the
+       linker won't look for a file to match a
+       wildcard.  The wildcard also means that it
+       doesn't matter which directory crtbegin.o
+       is in.  */
+
+    KEEP (*crtbegin.o(.ctors))
+    KEEP (*crtbegin?.o(.ctors))
+
+    /* We don't want to include the .ctor section from
+       the crtend.o file until after the sorted ctors.
+       The .ctor section from the crtend file contains the
+       end of ctors marker and it must be last */
+
+    KEEP (*(EXCLUDE_FILE (*crtend.o *crtend?.o $OTHER_EXCLUDE_FILES) .ctors))
+    KEEP (*(SORT(.ctors.*)))
+    KEEP (*(.ctors))
+    ${CONSTRUCTING+${CTOR_END}}
+  }"
+DTOR=".dtors        ${CONSTRUCTING-0} :
+  {
+    ${CONSTRUCTING+${DTOR_START}}
+    KEEP (*crtbegin.o(.dtors))
+    KEEP (*crtbegin?.o(.dtors))
+    KEEP (*(EXCLUDE_FILE (*crtend.o *crtend?.o $OTHER_EXCLUDE_FILES) .dtors))
+    KEEP (*(SORT(.dtors.*)))
+    KEEP (*(.dtors))
+    ${CONSTRUCTING+${DTOR_END}}
+  }"
+STACK="  .stack        ${RELOCATING-0}${RELOCATING+${STACK_ADDR}} :
+  {
+    ${RELOCATING+_stack = .;}
+    *(.stack)
+  }"
+
+TEXT_START_ADDR="SEGMENT_START(\"text-segment\", ${TEXT_START_ADDR})"
+SHLIB_TEXT_START_ADDR="SEGMENT_START(\"text-segment\", ${SHLIB_TEXT_START_ADDR:-0})"
+
+# if this is for an embedded system, don't add SIZEOF_HEADERS.
+if [ -z "$EMBEDDED" ]; then
+   test -z "${TEXT_BASE_ADDRESS}" && TEXT_BASE_ADDRESS="${TEXT_START_ADDR} + SIZEOF_HEADERS"
+else
+   test -z "${TEXT_BASE_ADDRESS}" && TEXT_BASE_ADDRESS="${TEXT_START_ADDR}"
+fi
+
+cat <<EOF
+OUTPUT_FORMAT("${OUTPUT_FORMAT}", "${BIG_OUTPUT_FORMAT}",
+	      "${LITTLE_OUTPUT_FORMAT}")
+OUTPUT_ARCH(${OUTPUT_ARCH})
+${RELOCATING+ENTRY(${ENTRY})}
+
+${RELOCATING+${LIB_SEARCH_DIRS}}
+${RELOCATING+${EXECUTABLE_SYMBOLS}}
+${RELOCATING+${INPUT_FILES}}
+${RELOCATING- /* For some reason, the Solaris linker makes bad executables
+  if gld -r is used and the intermediate file has sections starting
+  at non-zero addresses.  Could be a Solaris ld bug, could be a GNU ld
+  bug.  But for now assigning the zero vmas works.  */}
+
+SECTIONS
+{
+  /* Read-only sections, merged into text segment: */
+  ${CREATE_SHLIB-${CREATE_PIE-${RELOCATING+PROVIDE (__executable_start = ${TEXT_START_ADDR}); . = ${TEXT_BASE_ADDRESS};}}}
+  ${CREATE_SHLIB+${RELOCATING+. = ${SHLIB_TEXT_START_ADDR} + SIZEOF_HEADERS;}}
+  ${CREATE_PIE+${RELOCATING+. = ${SHLIB_TEXT_START_ADDR} + SIZEOF_HEADERS;}}
+  ${INITIAL_READONLY_SECTIONS}
+  .note.gnu.build-id : { *(.note.gnu.build-id) }
+EOF
+
+test -n "${RELOCATING+0}" || unset NON_ALLOC_DYN
+test -z "${NON_ALLOC_DYN}" || TEXT_DYNAMIC=
+cat > ldscripts/dyntmp.$$ <<EOF
+  ${TEXT_DYNAMIC+${DYNAMIC}}
+  .hash         ${RELOCATING-0} : { *(.hash) }
+  .gnu.hash     ${RELOCATING-0} : { *(.gnu.hash) }
+  .dynsym       ${RELOCATING-0} : { *(.dynsym) }
+  .dynstr       ${RELOCATING-0} : { *(.dynstr) }
+  .gnu.version  ${RELOCATING-0} : { *(.gnu.version) }
+  .gnu.version_d ${RELOCATING-0}: { *(.gnu.version_d) }
+  .gnu.version_r ${RELOCATING-0}: { *(.gnu.version_r) }
+EOF
+
+if [ "x$COMBRELOC" = x ]; then
+  COMBRELOCCAT="cat >> ldscripts/dyntmp.$$"
+else
+  COMBRELOCCAT="cat > $COMBRELOC"
+fi
+eval $COMBRELOCCAT <<EOF
+  .rel.init     ${RELOCATING-0} : { *(.rel.init) }
+  .rela.init    ${RELOCATING-0} : { *(.rela.init) }
+  .rel.text     ${RELOCATING-0} : { *(.rel.text${RELOCATING+ .rel.text.* .rel.gnu.linkonce.t.*}) }
+  .rela.text    ${RELOCATING-0} : { *(.rela.text${RELOCATING+ .rela.text.* .rela.gnu.linkonce.t.*}) }
+  .rel.fini     ${RELOCATING-0} : { *(.rel.fini) }
+  .rela.fini    ${RELOCATING-0} : { *(.rela.fini) }
+  .rel.rodata   ${RELOCATING-0} : { *(.rel.rodata${RELOCATING+ .rel.rodata.* .rel.gnu.linkonce.r.*}) }
+  .rela.rodata  ${RELOCATING-0} : { *(.rela.rodata${RELOCATING+ .rela.rodata.* .rela.gnu.linkonce.r.*}) }
+  ${OTHER_READONLY_RELOC_SECTIONS}
+  .rel.data.rel.ro ${RELOCATING-0} : { *(.rel.data.rel.ro${RELOCATING+* .rel.gnu.linkonce.d.rel.ro.*}) }
+  .rela.data.rel.ro ${RELOCATING-0} : { *(.rela.data.rel.ro${RELOCATING+* .rela.gnu.linkonce.d.rel.ro.*}) }
+  .rel.data     ${RELOCATING-0} : { *(.rel.data${RELOCATING+ .rel.data.* .rel.gnu.linkonce.d.*}) }
+  .rela.data    ${RELOCATING-0} : { *(.rela.data${RELOCATING+ .rela.data.* .rela.gnu.linkonce.d.*}) }
+  .rel.tdata	${RELOCATING-0} : { *(.rel.tdata${RELOCATING+ .rel.tdata.* .rel.gnu.linkonce.td.*}) }
+  .rela.tdata	${RELOCATING-0} : { *(.rela.tdata${RELOCATING+ .rela.tdata.* .rela.gnu.linkonce.td.*}) }
+  .rel.tbss	${RELOCATING-0} : { *(.rel.tbss${RELOCATING+ .rel.tbss.* .rel.gnu.linkonce.tb.*}) }
+  .rela.tbss	${RELOCATING-0} : { *(.rela.tbss${RELOCATING+ .rela.tbss.* .rela.gnu.linkonce.tb.*}) }
+  .rel.ctors    ${RELOCATING-0} : { *(.rel.ctors) }
+  .rela.ctors   ${RELOCATING-0} : { *(.rela.ctors) }
+  .rel.dtors    ${RELOCATING-0} : { *(.rel.dtors) }
+  .rela.dtors   ${RELOCATING-0} : { *(.rela.dtors) }
+  .rel.got      ${RELOCATING-0} : { *(.rel.got) }
+  .rela.got     ${RELOCATING-0} : { *(.rela.got) }
+  ${OTHER_GOT_RELOC_SECTIONS}
+  ${REL_SDATA}
+  ${REL_SBSS}
+  ${REL_SDATA2}
+  ${REL_SBSS2}
+  .rel.bss      ${RELOCATING-0} : { *(.rel.bss${RELOCATING+ .rel.bss.* .rel.gnu.linkonce.b.*}) }
+  .rela.bss     ${RELOCATING-0} : { *(.rela.bss${RELOCATING+ .rela.bss.* .rela.gnu.linkonce.b.*}) }
+  ${REL_LARGE}
+EOF
+
+if [ -n "$COMBRELOC" ]; then
+cat >> ldscripts/dyntmp.$$ <<EOF
+  .rel.dyn      ${RELOCATING-0} :
+    {
+EOF
+sed -e '/^[ 	]*[{}][ 	]*$/d;/:[ 	]*$/d;/\.rela\./d;s/^.*: { *\(.*\)}$/      \1/' $COMBRELOC >> ldscripts/dyntmp.$$
+cat >> ldscripts/dyntmp.$$ <<EOF
+    }
+  .rel.ifunc.dyn      ${RELOCATING-0} :
+    {
+      *(.rel.ifunc.*)
+    }
+  .rela.dyn     ${RELOCATING-0} :
+    {
+EOF
+sed -e '/^[ 	]*[{}][ 	]*$/d;/:[ 	]*$/d;/\.rel\./d;s/^.*: { *\(.*\)}/      \1/' $COMBRELOC >> ldscripts/dyntmp.$$
+cat >> ldscripts/dyntmp.$$ <<EOF
+    }
+  .rela.ifunc.dyn     ${RELOCATING-0} :
+    {
+      *(.rela.ifunc.*)
+    }
+EOF
+fi
+
+cat >> ldscripts/dyntmp.$$ <<EOF
+  .rel.plt      ${RELOCATING-0} : { *(.rel.plt) }
+  .rela.plt     ${RELOCATING-0} : { *(.rela.plt) }
+  ${OTHER_PLT_RELOC_SECTIONS}
+EOF
+
+if test -z "${NON_ALLOC_DYN}"; then
+  if test -z "${NO_REL_RELOCS}${NO_RELA_RELOCS}"; then
+    cat ldscripts/dyntmp.$$
+  else
+    if test -z "${NO_REL_RELOCS}"; then
+      sed -e '/^[ 	]*\.rela\.[^}]*$/,/}/d' -e '/^[ 	]*\.rela\./d' ldscripts/dyntmp.$$
+    fi
+    if test -z "${NO_RELA_RELOCS}"; then
+      sed -e '/^[ 	]*\.rel\.[^}]*$/,/}/d' -e '/^[ 	]*\.rel\./d' ldscripts/dyntmp.$$
+    fi
+  fi
+  rm -f ldscripts/dyntmp.$$
+fi
+
+cat <<EOF
+  .init         ${RELOCATING-0} : 
+  { 
+    ${RELOCATING+${INIT_START}}
+    KEEP (*(.init))
+    ${RELOCATING+${INIT_END}}
+  } =${NOP-0}
+
+  ${TEXT_PLT+${PLT}}
+  ${TINY_READONLY_SECTION}
+  .text         ${RELOCATING-0} :
+  {
+    ${RELOCATING+${TEXT_START_SYMBOLS}}
+    *(.text .stub${RELOCATING+ .text.* .gnu.linkonce.t.*})
+    /* .gnu.warning sections are handled specially by elf32.em.  */
+    *(.gnu.warning)
+    ${RELOCATING+${OTHER_TEXT_SECTIONS}}
+  } =${NOP-0}
+  .fini         ${RELOCATING-0} :
+  {
+    ${RELOCATING+${FINI_START}}
+    KEEP (*(.fini))
+    ${RELOCATING+${FINI_END}}
+  } =${NOP-0}
+  ${RELOCATING+PROVIDE (__${ETEXT_NAME} = .);}
+  ${RELOCATING+PROVIDE (_${ETEXT_NAME} = .);}
+  ${RELOCATING+PROVIDE (${ETEXT_NAME} = .);}
+  ${WRITABLE_RODATA-${RODATA}}
+  .rodata1      ${RELOCATING-0} : { *(.rodata1) }
+  ${CREATE_SHLIB-${SDATA2}}
+  ${CREATE_SHLIB-${SBSS2}}
+  ${OTHER_READONLY_SECTIONS}
+  .eh_frame_hdr : { *(.eh_frame_hdr) }
+  .eh_frame     ${RELOCATING-0} : ONLY_IF_RO { KEEP (*(.eh_frame)) }
+  .gcc_except_table ${RELOCATING-0} : ONLY_IF_RO { *(.gcc_except_table .gcc_except_table.*) }
+
+  /* Adjust the address for the data segment.  We want to adjust up to
+     the same address within the page on the next page up.  */
+  ${CREATE_SHLIB-${CREATE_PIE-${RELOCATING+. = ${DATA_ADDR-${DATA_SEGMENT_ALIGN}};}}}
+  ${CREATE_SHLIB+${RELOCATING+. = ${SHLIB_DATA_ADDR-${DATA_SEGMENT_ALIGN}};}}
+  ${CREATE_PIE+${RELOCATING+. = ${SHLIB_DATA_ADDR-${DATA_SEGMENT_ALIGN}};}}
+
+  /* Exception handling  */
+  .eh_frame     ${RELOCATING-0} : ONLY_IF_RW { KEEP (*(.eh_frame)) }
+  .gcc_except_table ${RELOCATING-0} : ONLY_IF_RW { *(.gcc_except_table .gcc_except_table.*) }
+
+  /* Thread Local Storage sections  */
+  .tdata	${RELOCATING-0} : { *(.tdata${RELOCATING+ .tdata.* .gnu.linkonce.td.*}) }
+
+  .preinit_array   ${RELOCATING-0} :
+  {
+    ${RELOCATING+${CREATE_SHLIB-PROVIDE_HIDDEN (${USER_LABEL_PREFIX}__preinit_array_start = .);}}
+    KEEP (*(.preinit_array))
+    ${RELOCATING+${CREATE_SHLIB-PROVIDE_HIDDEN (${USER_LABEL_PREFIX}__preinit_array_end = .);}}
+  }
+  .init_array   ${RELOCATING-0} :
+  {
+     ${RELOCATING+${CREATE_SHLIB-PROVIDE_HIDDEN (${USER_LABEL_PREFIX}__init_array_start = .);}}
+     KEEP (*(SORT(.init_array.*)))
+     KEEP (*(.init_array))
+     ${RELOCATING+${CREATE_SHLIB-PROVIDE_HIDDEN (${USER_LABEL_PREFIX}__init_array_end = .);}}
+  }
+  .fini_array   ${RELOCATING-0} :
+  {
+    ${RELOCATING+${CREATE_SHLIB-PROVIDE_HIDDEN (${USER_LABEL_PREFIX}__fini_array_start = .);}}
+    KEEP (*(.fini_array))
+    KEEP (*(SORT(.fini_array.*)))
+    ${RELOCATING+${CREATE_SHLIB-PROVIDE_HIDDEN (${USER_LABEL_PREFIX}__fini_array_end = .);}}
+  }
+  ${SMALL_DATA_CTOR-${RELOCATING+${CTOR}}}
+  ${SMALL_DATA_DTOR-${RELOCATING+${DTOR}}}
+  .jcr          ${RELOCATING-0} : { KEEP (*(.jcr)) }
+
+  ${RELOCATING+${DATARELRO}}
+  ${OTHER_RELRO_SECTIONS}
+  ${TEXT_DYNAMIC-${DYNAMIC}}
+  ${DATA_GOT+${RELRO_NOW+${GOT}}}
+  ${DATA_GOT+${RELRO_NOW+${GOTPLT}}}
+  ${DATA_GOT+${RELRO_NOW-${SEPARATE_GOTPLT+${GOT}}}}
+  ${RELOCATING+${DATA_SEGMENT_RELRO_END}}
+  ${DATA_GOT+${RELRO_NOW-${SEPARATE_GOTPLT-${GOT}}}}
+  ${DATA_GOT+${RELRO_NOW-${GOTPLT}}}
+
+  ${DATA_PLT+${PLT_BEFORE_GOT-${PLT}}}
+
+  .data         ${RELOCATING-0} :
+  {
+    ${RELOCATING+${DATA_START_SYMBOLS}}
+    *(.data${RELOCATING+ .data.* .gnu.linkonce.d.*})
+    ${CONSTRUCTING+SORT(CONSTRUCTORS)}
+  }
+  .data1        ${RELOCATING-0} : { *(.data1) }
+  ${WRITABLE_RODATA+${RODATA}}
+  ${OTHER_READWRITE_SECTIONS}
+  ${SMALL_DATA_CTOR+${RELOCATING+${CTOR}}}
+  ${SMALL_DATA_DTOR+${RELOCATING+${DTOR}}}
+  ${DATA_PLT+${PLT_BEFORE_GOT+${PLT}}}
+  ${SDATA_GOT+${RELOCATING+${OTHER_GOT_SYMBOLS}}}
+  ${SDATA_GOT+${GOT}}
+  ${SDATA_GOT+${OTHER_GOT_SECTIONS}}
+  ${SDATA}
+  ${OTHER_SDATA_SECTIONS}
+  ${RELOCATING+${DATA_END_SYMBOLS-${USER_LABEL_PREFIX}_edata = .; PROVIDE (${USER_LABEL_PREFIX}edata = .);}}
+  ${RELOCATING+__bss_start = .;}
+  ${RELOCATING+${OTHER_BSS_SYMBOLS}}
+  ${SBSS}
+  ${BSS_PLT+${PLT}}
+  .bss          ${RELOCATING-0} :
+  {
+   *(.dynbss)
+   *(.bss${RELOCATING+ .bss.* .gnu.linkonce.b.*})
+   *(COMMON)
+   /* Align here to ensure that the .bss section occupies space up to
+      _end.  Align after .bss to ensure correct alignment even if the
+      .bss section disappears because there are no input sections.
+      FIXME: Why do we need it? When there is no .bss section, we don't
+      pad the .data section.  */
+   ${RELOCATING+. = ALIGN(. != 0 ? ${ALIGNMENT} : 1);}
+  }
+  ${OTHER_BSS_SECTIONS}
+  ${RELOCATING+${OTHER_BSS_END_SYMBOLS}}
+  ${RELOCATING+. = ALIGN(${ALIGNMENT});}
+  ${LARGE_SECTIONS}
+  ${RELOCATING+. = ALIGN(${ALIGNMENT});}
+  ${RELOCATING+${OTHER_END_SYMBOLS}}
+  ${RELOCATING+${END_SYMBOLS-${USER_LABEL_PREFIX}_end = .; PROVIDE (${USER_LABEL_PREFIX}end = .);}}
+  ${RELOCATING+${DATA_SEGMENT_END}}
+EOF
+
+if test -n "${NON_ALLOC_DYN}"; then
+  if test -z "${NO_REL_RELOCS}${NO_RELA_RELOCS}"; then
+    cat ldscripts/dyntmp.$$
+  else
+    if test -z "${NO_REL_RELOCS}"; then
+      sed -e '/^[ 	]*\.rela\.[^}]*$/,/}/d' -e '/^[ 	]*\.rela\./d' ldscripts/dyntmp.$$
+    fi
+    if test -z "${NO_RELA_RELOCS}"; then
+      sed -e '/^[ 	]*\.rel\.[^}]*$/,/}/d' -e '/^[ 	]*\.rel\./d' ldscripts/dyntmp.$$
+    fi
+  fi
+  rm -f ldscripts/dyntmp.$$
+fi
+
+cat <<EOF
+  /* Stabs debugging sections.  */
+  .stab          0 : { *(.stab) }
+  .stabstr       0 : { *(.stabstr) }
+  .stab.excl     0 : { *(.stab.excl) }
+  .stab.exclstr  0 : { *(.stab.exclstr) }
+  .stab.index    0 : { *(.stab.index) }
+  .stab.indexstr 0 : { *(.stab.indexstr) }
+
+  .comment       0 : { *(.comment) }
+
+  /* DWARF debug sections.
+     Symbols in the DWARF debugging sections are relative to the beginning
+     of the section so we begin them at 0.  */
+
+  /* DWARF 1 */
+  .debug          0 : { *(.debug) }
+  .line           0 : { *(.line) }
+
+  /* GNU DWARF 1 extensions */
+  .debug_srcinfo  0 : { *(.debug_srcinfo) }
+  .debug_sfnames  0 : { *(.debug_sfnames) }
+
+  /* DWARF 1.1 and DWARF 2 */
+  .debug_aranges  0 : { *(.debug_aranges) }
+  .debug_pubnames 0 : { *(.debug_pubnames) }
+
+  /* DWARF 2 */
+  .debug_info     0 : { *(.debug_info${RELOCATING+ .gnu.linkonce.wi.*}) }
+  .debug_abbrev   0 : { *(.debug_abbrev) }
+  .debug_line     0 : { *(.debug_line) }
+  .debug_frame    0 : { *(.debug_frame) }
+  .debug_str      0 : { *(.debug_str) }
+  .debug_loc      0 : { *(.debug_loc) }
+  .debug_macinfo  0 : { *(.debug_macinfo) }
+
+  /* SGI/MIPS DWARF 2 extensions */
+  .debug_weaknames 0 : { *(.debug_weaknames) }
+  .debug_funcnames 0 : { *(.debug_funcnames) }
+  .debug_typenames 0 : { *(.debug_typenames) }
+  .debug_varnames  0 : { *(.debug_varnames) }
+
+  /* DWARF 3 */
+  .debug_pubtypes 0 : { *(.debug_pubtypes) }
+  .debug_ranges   0 : { *(.debug_ranges) }
+
+  ${TINY_DATA_SECTION}
+  ${TINY_BSS_SECTION}
+
+  ${STACK_ADDR+${STACK}}
+  ${ATTRS_SECTIONS}
+  ${OTHER_SECTIONS}
+  ${RELOCATING+${OTHER_SYMBOLS}}
+  ${RELOCATING+${DISCARDED}}
+}
+EOF