* emulparams/armelf.sh: Change SCRIPT_NAME to

        elf.  Change TEXT_START_ADDR to 0x8000.  Define
        OTHER_TEXT_SECTIONS, OTHER_BSS_SYMBOLS and
        OTHER_BSS_END_SYMBOLS.
        * scripttempl/elf.sc:  Modify to use
        OTHER_BSS_END_SYMBOLS.
        * scripttempl/elfarm.sc:  Remove file.

1 files changed, 0 insertions, 268 deletions

diff --git a/ld/scripttempl/elfarm.sc b/ld/scripttempl/elfarm.sc
deleted file mode 100644
index b909005..0000000
--- a/ld/scripttempl/elfarm.sc
+++ /dev/null
@@ -1,268 +0,0 @@
-#
-# Unusual variables checked by this code:
-#	NOP - two byte opcode for no-op (defaults to 0)
-#	DATA_ADDR - if end-of-text-plus-one-page isn't right for data start
-#	INITIAL_READONLY_SECTIONS - at start of text segment
-#	OTHER_READONLY_SECTIONS - other than .text .init .rodata ...
-#		(e.g., .PARISC.milli)
-#	OTHER_TEXT_SECTIONS - these get put in .text when relocating
-#	OTHER_READWRITE_SECTIONS - other than .data .bss .ctors .sdata ...
-#		(e.g., .PARISC.global)
-#	OTHER_SECTIONS - at the end
-#	EXECUTABLE_SYMBOLS - symbols that must be defined for an
-#		executable (e.g., _DYNAMIC_LINK)
-#	TEXT_START_SYMBOLS - symbols that appear at the start of the
-#		.text section.
-#	DATA_START_SYMBOLS - symbols that appear at the start of the
-#		.data section.
-#	OTHER_GOT_SYMBOLS - symbols defined just before .got.
-#	OTHER_GOT_SECTIONS - sections just after .got and .sdata.
-#	OTHER_BSS_SYMBOLS - symbols that appear at the start of the
-#		.bss section besides __bss_start.
-#	DATA_PLT - .plt should be in data segment, not text segment.
-#	TEXT_DYNAMIC - .dynamic in text segment, not data segment.
-#	EMBEDDED - whether this is for an embedded system. 
-#	SHLIB_TEXT_START_ADDR - if set, add to SIZEOF_HEADERS to set
-#		start address of shared library.
-#	INPUT_FILES - INPUT command of files to always include
-#
-# When adding sections, do note that the names of some sections are used
-# when specifying the start address of the next.
-#
-
-test -z "$ENTRY" && ENTRY=_start
-test -z "${BIG_OUTPUT_FORMAT}" && BIG_OUTPUT_FORMAT=${OUTPUT_FORMAT}
-test -z "${LITTLE_OUTPUT_FORMAT}" && LITTLE_OUTPUT_FORMAT=${OUTPUT_FORMAT}
-if [ -z "$MACHINE" ]; then OUTPUT_ARCH=${ARCH}; else OUTPUT_ARCH=${ARCH}:${MACHINE}; fi
-test -z "${ELFSIZE}" && ELFSIZE=32
-test -z "${ALIGNMENT}" && ALIGNMENT="${ELFSIZE} / 8"
-test "$LD_FLAG" = "N" && DATA_ADDR=.
-INTERP=".interp   ${RELOCATING-0} : { *(.interp) 	}"
-PLT=".plt    ${RELOCATING-0} : { *(.plt)	}"
-DYNAMIC=".dynamic     ${RELOCATING-0} : { *(.dynamic) }"
-
-# if this is for an embedded system, don't add SIZEOF_HEADERS.
-if [ -z "$EMBEDDED" ]; then
-   test -z "${TEXT_BASE_ADDRESS}" && TEXT_BASE_ADDRESS="${TEXT_START_ADDR} + SIZEOF_HEADERS"
-else
-   test -z "${TEXT_BASE_ADDRESS}" && TEXT_BASE_ADDRESS="${TEXT_START_ADDR}"
-fi
-
-cat <<EOF
-OUTPUT_FORMAT("${OUTPUT_FORMAT}", "${BIG_OUTPUT_FORMAT}",
-	      "${LITTLE_OUTPUT_FORMAT}")
-OUTPUT_ARCH(${OUTPUT_ARCH})
-ENTRY(${ENTRY})
-
-${RELOCATING+${LIB_SEARCH_DIRS}}
-${RELOCATING+/* Do we need any of these for elf?
-   __DYNAMIC = 0; ${STACKZERO+${STACKZERO}} ${SHLIB_PATH+${SHLIB_PATH}}  */}
-${RELOCATING+${EXECUTABLE_SYMBOLS}}
-${RELOCATING+${INPUT_FILES}}
-${RELOCATING- /* For some reason, the Solaris linker makes bad executables
-  if gld -r is used and the intermediate file has sections starting
-  at non-zero addresses.  Could be a Solaris ld bug, could be a GNU ld
-  bug.  But for now assigning the zero vmas works.  */}
-
-SECTIONS
-{
-  /* Read-only sections, merged into text segment: */
-  ${CREATE_SHLIB-${RELOCATING+. = ${TEXT_BASE_ADDRESS};}}
-  ${CREATE_SHLIB+${RELOCATING+. = ${SHLIB_TEXT_START_ADDR:-0} + SIZEOF_HEADERS;}}
-  ${CREATE_SHLIB-${INTERP}}
-  ${INITIAL_READONLY_SECTIONS}
-  ${TEXT_DYNAMIC+${DYNAMIC}}
-  .hash        ${RELOCATING-0} : { *(.hash)		}
-  .dynsym      ${RELOCATING-0} : { *(.dynsym)		}
-  .dynstr      ${RELOCATING-0} : { *(.dynstr)		}
-  .gnu.version ${RELOCATING-0} : { *(.gnu.version)	}
-  .gnu.version_d ${RELOCATING-0} : { *(.gnu.version_d)	}
-  .gnu.version_r ${RELOCATING-0} : { *(.gnu.version_r)	}
-  .rel.text    ${RELOCATING-0} :
-    {
-      *(.rel.text)
-      ${RELOCATING+*(.rel.text.*)}
-      ${RELOCATING+*(.rel.gnu.linkonce.t*)}
-    }
-  .rela.text   ${RELOCATING-0} :
-    {
-      *(.rela.text)
-      ${RELOCATING+*(.rela.text.*)}
-      ${RELOCATING+*(.rela.gnu.linkonce.t*)}
-    }
-  .rel.data    ${RELOCATING-0} :
-    {
-      *(.rel.data)
-      ${RELOCATING+*(.rel.data.*)}
-      ${RELOCATING+*(.rel.gnu.linkonce.d*)}
-    }
-  .rela.data   ${RELOCATING-0} :
-    {
-      *(.rela.data)
-      ${RELOCATING+*(.rela.data.*)}
-      ${RELOCATING+*(.rela.gnu.linkonce.d*)}
-    }
-  .rel.rodata  ${RELOCATING-0} :
-    {
-      *(.rel.rodata)
-      ${RELOCATING+*(.rel.rodata.*)}
-      ${RELOCATING+*(.rel.gnu.linkonce.r*)}
-    }
-  .rela.rodata ${RELOCATING-0} :
-    {
-      *(.rela.rodata)
-      ${RELOCATING+*(.rela.rodata.*)}
-      ${RELOCATING+*(.rela.gnu.linkonce.r*)}
-    }
-  .rel.got     ${RELOCATING-0} : { *(.rel.got)		}
-  .rela.got    ${RELOCATING-0} : { *(.rela.got)		}
-  .rel.ctors   ${RELOCATING-0} : { *(.rel.ctors)	}
-  .rela.ctors  ${RELOCATING-0} : { *(.rela.ctors)	}
-  .rel.dtors   ${RELOCATING-0} : { *(.rel.dtors)	}
-  .rela.dtors  ${RELOCATING-0} : { *(.rela.dtors)	}
-  .rel.init    ${RELOCATING-0} : { *(.rel.init)	}
-  .rela.init   ${RELOCATING-0} : { *(.rela.init)	}
-  .rel.fini    ${RELOCATING-0} : { *(.rel.fini)	}
-  .rela.fini   ${RELOCATING-0} : { *(.rela.fini)	}
-  .rel.bss     ${RELOCATING-0} : { *(.rel.bss)		}
-  .rela.bss    ${RELOCATING-0} : { *(.rela.bss)		}
-  .rel.plt     ${RELOCATING-0} : { *(.rel.plt)		}
-  .rela.plt    ${RELOCATING-0} : { *(.rela.plt)		}
-  .init        ${RELOCATING-0} : { KEEP (*(.init))	} =${NOP-0}
-  ${DATA_PLT-${PLT}}
-  .text    ${RELOCATING-0} :
-  {
-    ${RELOCATING+${TEXT_START_SYMBOLS}}
-    *(.text)
-    *(.glue_7t)
-    *(.glue_7)
-    ${RELOCATING+*(.text.*)}
-    *(.stub)
-    /* .gnu.warning sections are handled specially by elf32.em.  */
-    *(.gnu.warning)
-    ${RELOCATING+*(.gnu.linkonce.t*)}
-    ${RELOCATING+${OTHER_TEXT_SECTIONS}}
-  } =${NOP-0}
-  ${RELOCATING+_etext = .;}
-  ${RELOCATING+PROVIDE (etext = .);}
-  .fini    ${RELOCATING-0} : { KEEP (*(.fini))		} =${NOP-0}
-  .rodata  ${RELOCATING-0} :
-  {
-    *(.rodata)
-    ${RELOCATING+*(.rodata.*)}
-    ${RELOCATING+*(.gnu.linkonce.r*)}
-  }
-  .rodata1 ${RELOCATING-0} : { *(.rodata1) }
-  ${RELOCATING+${OTHER_READONLY_SECTIONS}}
-
-  /* Adjust the address for the data segment.  We want to adjust up to
-     the same address within the page on the next page up.  */
-  ${CREATE_SHLIB-${RELOCATING+. = ${DATA_ADDR-ALIGN(${MAXPAGESIZE}) + (. & (${MAXPAGESIZE} - 1))};}}
-  ${CREATE_SHLIB+${RELOCATING+. = ${SHLIB_DATA_ADDR-ALIGN(${MAXPAGESIZE}) + (. & (${MAXPAGESIZE} - 1))};}}
-
-  .data  ${RELOCATING-0} :
-  {
-    ${RELOCATING+${DATA_START_SYMBOLS}}
-    *(.data)
-    ${RELOCATING+*(.data.*)}
-    ${RELOCATING+*(.gnu.linkonce.d*)}
-    ${CONSTRUCTING+CONSTRUCTORS}
-  }
-  .data1 ${RELOCATING-0} : { *(.data1) }
-  ${RELOCATING+${OTHER_READWRITE_SECTIONS}}
-  .ctors       ${RELOCATING-0} :
-  {
-    ${CONSTRUCTING+${CTOR_START}}
-    /* gcc uses crtbegin.o to find the start of the constructors, so
-       we make sure it is first.  Because this is a wildcard, it
-       doesn't matter if the user does not actually link against
-       crtbegin.o; the linker won't look for a file to match a
-       wildcard.  The wildcard also means that it doesn't matter which
-       directory crtbegin.o is in.  */
-    KEEP (*crtbegin.o(.ctors))
-    KEEP (*(SORT(.ctors.*)))
-    KEEP (*(.ctors))
-    ${CONSTRUCTING+${CTOR_END}}
-  }
-  .dtors       ${RELOCATING-0} :
-  {
-    ${CONSTRUCTING+${DTOR_START}}
-    KEEP (*crtbegin.o(.dtors))
-    KEEP (*(SORT(.dtors.*)))
-    KEEP (*(.dtors))
-    ${CONSTRUCTING+${DTOR_END}}
-  }
-  ${DATA_PLT+${PLT}}
-  ${RELOCATING+${OTHER_GOT_SYMBOLS}}
-  .got         ${RELOCATING-0} : { *(.got.plt) *(.got) }
-  ${TEXT_DYNAMIC-${DYNAMIC}}
-  /* We want the small data sections together, so single-instruction offsets
-     can access them all, and initialized data all before uninitialized, so
-     we can shorten the on-disk segment size.  */
-  .sdata   ${RELOCATING-0} : { *(.sdata) }
-  ${RELOCATING+${OTHER_GOT_SECTIONS}}
-  ${RELOCATING+_edata  =  .;}
-  ${RELOCATING+PROVIDE (edata = .);}
-  ${RELOCATING+__bss_start = .;}
-  ${RELOCATING+__bss_start__ = .;}
-  ${RELOCATING+${OTHER_BSS_SYMBOLS}}
-  .sbss    ${RELOCATING-0} : { *(.sbss) *(.scommon) }
-  .bss     ${RELOCATING-0} :
-  {
-   *(.dynbss)
-   *(.bss)
-   *(COMMON)
-  }
-  ${RELOCATING+. = ALIGN(${ALIGNMENT});}
-  ${RELOCATING+_end = . ;}
-  ${RELOCATING+_bss_end__ = . ;}
-  ${RELOCATING+__bss_end__ = . ;}
-  ${RELOCATING+PROVIDE (end = .);}
-
-  /* Stabs debugging sections.  */
-  .stab 0 : { *(.stab) }
-  .stabstr 0 : { *(.stabstr) }
-  .stab.excl 0 : { *(.stab.excl) }
-  .stab.exclstr 0 : { *(.stab.exclstr) }
-  .stab.index 0 : { *(.stab.index) }
-  .stab.indexstr 0 : { *(.stab.indexstr) }
-
-  .comment 0 : { *(.comment) }
-
-  /* DWARF debug sections.
-     Symbols in the DWARF debugging sections are relative to the beginning
-     of the section so we begin them at 0.  */
-
-  /* DWARF 1 */
-  .debug          0 : { *(.debug) }
-  .line           0 : { *(.line) }
-
-  /* GNU DWARF 1 extensions */
-  .debug_srcinfo  0 : { *(.debug_srcinfo) }
-  .debug_sfnames  0 : { *(.debug_sfnames) }
-
-  /* DWARF 1.1 and DWARF 2 */
-  .debug_aranges  0 : { *(.debug_aranges) }
-  .debug_pubnames 0 : { *(.debug_pubnames) }
-
-  /* DWARF 2 */
-  .debug_info     0 : { *(.debug_info) }
-  .debug_abbrev   0 : { *(.debug_abbrev) }
-  .debug_line     0 : { *(.debug_line) }
-  .debug_frame    0 : { *(.debug_frame) }
-  .debug_str      0 : { *(.debug_str) }
-  .debug_loc      0 : { *(.debug_loc) }
-  .debug_macinfo  0 : { *(.debug_macinfo) }
-
-  /* SGI/MIPS DWARF 2 extensions */
-  .debug_weaknames 0 : { *(.debug_weaknames) }
-  .debug_funcnames 0 : { *(.debug_funcnames) }
-  .debug_typenames 0 : { *(.debug_typenames) }
-  .debug_varnames  0 : { *(.debug_varnames) }
-
-  ${RELOCATING+${OTHER_RELOCATING_SECTIONS}}
-
-  /* These must appear regardless of ${RELOCATING}.  */
-  ${OTHER_SECTIONS}
-}
-EOF