Add support for Motorola XGATE embedded CPU

1 files changed, 463 insertions, 0 deletions

diff --git a/ld/scripttempl/elfxgate.sc b/ld/scripttempl/elfxgate.sc
new file mode 100644
index 0000000..0774eb2
--- /dev/null
+++ b/ld/scripttempl/elfxgate.sc
@@ -0,0 +1,463 @@
+#
+# Unusual variables checked by this code:
+#	NOP - four byte opcode for no-op (defaults to 0)
+#	DATA_ADDR - if end-of-text-plus-one-page isn't right for data start
+#	OTHER_READWRITE_SECTIONS - other than .data .bss .ctors .sdata ...
+#		(e.g., .PARISC.global)
+#	OTHER_SECTIONS - at the end
+#	EXECUTABLE_SYMBOLS - symbols that must be defined for an
+#		executable (e.g., _DYNAMIC_LINK)
+#	TEXT_START_SYMBOLS - symbols that appear at the start of the
+#		.text section.
+#	DATA_START_SYMBOLS - symbols that appear at the start of the
+#		.data section.
+#	OTHER_BSS_SYMBOLS - symbols that appear at the start of the
+#		.bss section besides __bss_start.
+#	EMBEDDED - whether this is for an embedded system. 
+#
+# When adding sections, do note that the names of some sections are used
+# when specifying the start address of the next.
+#
+test -z "$ENTRY" && ENTRY=_start
+test -z "${BIG_OUTPUT_FORMAT}" && BIG_OUTPUT_FORMAT=${OUTPUT_FORMAT}
+test -z "${LITTLE_OUTPUT_FORMAT}" && LITTLE_OUTPUT_FORMAT=${OUTPUT_FORMAT}
+if [ -z "$MACHINE" ]; then OUTPUT_ARCH=${ARCH}; else OUTPUT_ARCH=${ARCH}:${MACHINE}; fi
+test "$LD_FLAG" = "N" && DATA_ADDR=.
+
+CTOR=".ctors ${CONSTRUCTING-0} : 
+  {
+    ${CONSTRUCTING+ PROVIDE (__CTOR_LIST__ = .); }
+    ${CONSTRUCTING+${CTOR_START}}
+    KEEP (*(.ctors))
+
+    ${CONSTRUCTING+${CTOR_END}}
+    ${CONSTRUCTING+ PROVIDE(__CTOR_END__ = .); }
+  } ${RELOCATING+ > ${TEXT_MEMORY}}"
+
+DTOR="  .dtors	${CONSTRUCTING-0} :
+  {
+    ${CONSTRUCTING+ PROVIDE(__DTOR_LIST__ = .); }
+    KEEP (*(.dtors))
+    ${CONSTRUCTING+ PROVIDE(__DTOR_END__ = .); }
+  } ${RELOCATING+ > ${TEXT_MEMORY}}"
+
+
+VECTORS="
+  /* If the 'vectors_addr' symbol is defined, it indicates the start address
+     of interrupt vectors.  This depends on the 68HC11 operating mode:
+
+			Addr
+     Single chip	0xffc0
+     Extended mode	0xffc0
+     Bootstrap		0x00c0
+     Test		0xbfc0
+
+     In general, the vectors address is 0xffc0.  This can be overriden 
+     with the '-defsym vectors_addr=0xbfc0' ld option.
+
+     Note: for the bootstrap mode, the interrupt vectors are at 0xbfc0 but
+     they are redirected to 0x00c0 by the internal PROM.  Application's vectors
+     must also consist of jump instructions (see Motorola's manual).  */
+
+  PROVIDE (_vectors_addr = DEFINED (vectors_addr) ? vectors_addr : 0xffc0);
+  .vectors DEFINED (vectors_addr) ? vectors_addr : 0xffc0 :
+  {
+    KEEP (*(.vectors))
+  }"
+
+#
+# We provide two emulations: a fixed on that defines some memory banks
+# and a configurable one that includes a user provided memory definition.
+#
+case $GENERIC_BOARD in
+  yes|1|YES)
+	MEMORY_DEF="
+/* Get memory banks definition from some user configuration file.
+   This file must be located in some linker directory (search path
+   with -L<dir>). See fixed memory banks emulation script.  */
+INCLUDE memory.x;
+"
+	;;
+  *)
+MEMORY_DEF="
+/* Fixed definition of the available memory banks.
+   See generic emulation script for a user defined configuration.  */
+MEMORY
+{
+  page0 (rwx) : ORIGIN = 0x0, LENGTH = 256
+  text  (rx)  : ORIGIN = ${ROM_START_ADDR}, LENGTH = ${ROM_SIZE}
+  data        : ORIGIN = ${RAM_START_ADDR}, LENGTH = ${RAM_SIZE}
+  eeprom      : ORIGIN = ${EEPROM_START_ADDR}, LENGTH = ${EEPROM_SIZE}
+}
+
+/* Setup the stack on the top of the data memory bank.  */
+PROVIDE (_stack = ${RAM_START_ADDR} + ${RAM_SIZE} - 1);
+"
+	;;
+esac
+
+STARTUP_CODE="
+    /* Startup code.  */
+    KEEP (*(.install0))	/* Section should setup the stack pointer.  */
+    KEEP (*(.install1))	/* Place holder for applications.  */
+    KEEP (*(.install2))	/* Optional installation of data sections in RAM.  */
+    KEEP (*(.install3))	/* Place holder for applications.  */
+    KEEP (*(.install4))	/* Section that calls the main.  */
+"
+
+FINISH_CODE="
+    /* Finish code.  */
+    KEEP (*(.fini0))	/* Beginning of finish code (_exit symbol).  */
+    KEEP (*(.fini1))	/* Place holder for applications.  */
+    KEEP (*(.fini2))	/* C++ destructors.  */
+    KEEP (*(.fini3))	/* Place holder for applications.  */
+    KEEP (*(.fini4))	/* Runtime exit.  */
+"
+
+PRE_COMPUTE_DATA_SIZE="
+/* SCz: this does not work yet... This is supposed to force the loading
+   of _map_data.o (from libgcc.a) when the .data section is not empty.
+   By doing so, this should bring the code that copies the .data section
+   from ROM to RAM at init time.
+
+  ___pre_comp_data_size = SIZEOF(.data);
+  __install_data_sections = ___pre_comp_data_size > 0 ?
+		__map_data_sections : 0;
+*/
+"
+
+INSTALL_RELOC="
+  .install0 0 : { *(.install0) }
+  .install1 0 : { *(.install1) }
+  .install2 0 : { *(.install2) }
+  .install3 0 : { *(.install3) }
+  .install4 0 : { *(.install4) }
+"
+
+FINISH_RELOC="
+  .fini0 0 : { *(.fini0) }
+  .fini1 0 : { *(.fini1) }
+  .fini2 0 : { *(.fini2) }
+  .fini3 0 : { *(.fini3) }
+  .fini4 0 : { *(.fini4) }
+"
+
+BSS_DATA_RELOC="
+  .data1 0 : { *(.data1) }
+
+  /* We want the small data sections together, so single-instruction offsets
+     can access them all, and initialized data all before uninitialized, so
+     we can shorten the on-disk segment size.  */
+  .sdata   0 : { *(.sdata) }
+  .sbss    0 : { *(.sbss) }
+  .scommon 0 : { *(.scommon) }
+"
+
+SOFT_REGS_RELOC="
+  .softregs 0 : { *(.softregs) }
+"
+
+cat <<EOF
+${RELOCATING+/* Linker script for 68HC12 executable (PROM).  */}
+${RELOCATING-/* Linker script for 68HC12 object file (ld -r).  */}
+
+OUTPUT_FORMAT("${OUTPUT_FORMAT}", "${BIG_OUTPUT_FORMAT}",
+	      "${LITTLE_OUTPUT_FORMAT}")
+OUTPUT_ARCH(${OUTPUT_ARCH})
+${RELOCATING+ENTRY(${ENTRY})}
+
+${RELOCATING+${LIB_SEARCH_DIRS}}
+${RELOCATING+${EXECUTABLE_SYMBOLS}}
+${RELOCATING+${MEMORY_DEF}}
+
+SECTIONS
+{
+  .hash        ${RELOCATING-0} : { *(.hash)		}
+  .dynsym      ${RELOCATING-0} : { *(.dynsym)		}
+  .dynstr      ${RELOCATING-0} : { *(.dynstr)		}
+  .gnu.version		${RELOCATING-0} : { *(.gnu.version) }
+  .gnu.version_d	${RELOCATING-0} : { *(.gnu.version_d) }
+  .gnu.version_r	${RELOCATING-0} : { *(.gnu.version_r) }
+
+  .rel.text    ${RELOCATING-0} :
+    {
+      *(.rel.text)
+      ${RELOCATING+*(.rel.text.*)}
+      ${RELOCATING+*(.rel.gnu.linkonce.t.*)}
+    }
+  .rela.text   ${RELOCATING-0} :
+    {
+      *(.rela.text)
+      ${RELOCATING+*(.rela.text.*)}
+      ${RELOCATING+*(.rela.gnu.linkonce.t.*)}
+    }
+  .rel.data    ${RELOCATING-0} :
+    {
+      *(.rel.data)
+      ${RELOCATING+*(.rel.data.*)}
+      ${RELOCATING+*(.rel.gnu.linkonce.d.*)}
+    }
+  .rela.data   ${RELOCATING-0} :
+    {
+      *(.rela.data)
+      ${RELOCATING+*(.rela.data.*)}
+      ${RELOCATING+*(.rela.gnu.linkonce.d.*)}
+    }
+  .rel.rodata  ${RELOCATING-0} :
+    {
+      *(.rel.rodata)
+      ${RELOCATING+*(.rel.rodata.*)}
+      ${RELOCATING+*(.rel.gnu.linkonce.r.*)}
+    }
+  .rela.rodata ${RELOCATING-0} :
+    {
+      *(.rela.rodata)
+      ${RELOCATING+*(.rela.rodata.*)}
+      ${RELOCATING+*(.rela.gnu.linkonce.r.*)}
+    }
+  .rel.sdata   ${RELOCATING-0} :
+    {
+      *(.rel.sdata)
+      ${RELOCATING+*(.rel.sdata.*)}
+      ${RELOCATING+*(.rel.gnu.linkonce.s.*)}
+    }
+  .rela.sdata   ${RELOCATING-0} :
+    {
+      *(.rela.sdata)
+      ${RELOCATING+*(.rela.sdata.*)}
+      ${RELOCATING+*(.rela.gnu.linkonce.s.*)}
+    }
+  .rel.sbss    ${RELOCATING-0} :
+    { 
+      *(.rel.sbss)
+      ${RELOCATING+*(.rel.sbss.*)}
+      ${RELOCATING+*(.rel.gnu.linkonce.sb.*)}
+    }
+  .rela.sbss   ${RELOCATING-0} :
+    {
+      *(.rela.sbss)
+      ${RELOCATING+*(.rela.sbss.*)}
+      ${RELOCATING+*(.rel.gnu.linkonce.sb.*)}
+    }
+  .rel.bss     ${RELOCATING-0} : 
+    { 
+      *(.rel.bss)
+      ${RELOCATING+*(.rel.bss.*)}
+      ${RELOCATING+*(.rel.gnu.linkonce.b.*)}
+    }
+  .rela.bss    ${RELOCATING-0} : 
+    { 
+      *(.rela.bss)
+      ${RELOCATING+*(.rela.bss.*)}
+      ${RELOCATING+*(.rela.gnu.linkonce.b.*)}
+    }
+  .rel.stext		${RELOCATING-0} : { *(.rel.stest) }
+  .rela.stext		${RELOCATING-0} : { *(.rela.stest) }
+  .rel.etext		${RELOCATING-0} : { *(.rel.etest) }
+  .rela.etext		${RELOCATING-0} : { *(.rela.etest) }
+  .rel.sdata		${RELOCATING-0} : { *(.rel.sdata) }
+  .rela.sdata		${RELOCATING-0} : { *(.rela.sdata) }
+  .rel.edata		${RELOCATING-0} : { *(.rel.edata) }
+  .rela.edata		${RELOCATING-0} : { *(.rela.edata) }
+  .rel.eit_v		${RELOCATING-0} : { *(.rel.eit_v) }
+  .rela.eit_v		${RELOCATING-0} : { *(.rela.eit_v) }
+  .rel.ebss		${RELOCATING-0} : { *(.rel.ebss) }
+  .rela.ebss		${RELOCATING-0} : { *(.rela.ebss) }
+  .rel.srodata		${RELOCATING-0} : { *(.rel.srodata) }
+  .rela.srodata		${RELOCATING-0} : { *(.rela.srodata) }
+  .rel.erodata		${RELOCATING-0} : { *(.rel.erodata) }
+  .rela.erodata		${RELOCATING-0} : { *(.rela.erodata) }
+  .rel.got		${RELOCATING-0} : { *(.rel.got) }
+  .rela.got		${RELOCATING-0} : { *(.rela.got) }
+  .rel.ctors		${RELOCATING-0} : { *(.rel.ctors) }
+  .rela.ctors		${RELOCATING-0} : { *(.rela.ctors) }
+  .rel.dtors		${RELOCATING-0} : { *(.rel.dtors) }
+  .rela.dtors		${RELOCATING-0} : { *(.rela.dtors) }
+  .rel.init		${RELOCATING-0} : { *(.rel.init) }
+  .rela.init		${RELOCATING-0} : { *(.rela.init) }
+  .rel.fini		${RELOCATING-0} : { *(.rel.fini) }
+  .rela.fini		${RELOCATING-0} : { *(.rela.fini) }
+  .rel.plt		${RELOCATING-0} : { *(.rel.plt) }
+  .rela.plt		${RELOCATING-0} : { *(.rela.plt) }
+
+  /* Concatenate .page0 sections.  Put them in the page0 memory bank
+     unless we are creating a relocatable file.  */
+  .page0 :
+  {
+    *(.page0)
+  } ${RELOCATING+ > page0}
+
+  /* Start of text section.  */
+  .stext ${RELOCATING-0} : 
+  {
+    *(.stext)
+  } ${RELOCATING+ > ${TEXT_MEMORY}}
+
+  .init	${RELOCATING-0} :
+  {
+    *(.init) 
+  } ${RELOCATING+=${NOP-0}}
+
+  ${RELOCATING-${INSTALL_RELOC}}
+  ${RELOCATING-${FINISH_RELOC}}
+
+  .text ${RELOCATING-0}:
+  {
+    /* Put startup code at beginning so that _start keeps same address.  */
+    ${RELOCATING+${STARTUP_CODE}}
+
+    ${RELOCATING+*(.init)}
+    *(.text)
+    ${RELOCATING+*(.text.*)}
+    /* .gnu.warning sections are handled specially by elf32.em.  */
+    *(.gnu.warning)
+    ${RELOCATING+*(.gnu.linkonce.t.*)}
+    ${RELOCATING+*(.tramp)}
+    ${RELOCATING+*(.tramp.*)}
+
+    ${RELOCATING+${FINISH_CODE}}
+
+    ${RELOCATING+_etext = .;}
+    ${RELOCATING+PROVIDE (etext = .);}
+    ${RELOCATING+. = ALIGN(2);}
+  } ${RELOCATING+ > ${TEXT_MEMORY} =0xa7a7a7a7}
+
+  .eh_frame ${RELOCATING-0} :
+  {
+    KEEP (*(.eh_frame))
+  } ${RELOCATING+ > ${TEXT_MEMORY}}
+
+  .gcc_except_table ${RELOCATING-0} :
+  {
+    *(.gcc_except_table)
+  } ${RELOCATING+ > ${TEXT_MEMORY}}
+
+  .rodata  ${RELOCATING-0} :
+  {
+    *(.rodata)
+    ${RELOCATING+*(.rodata.*)}
+    ${RELOCATING+*(.gnu.linkonce.r*)}
+    ${RELOCATING+. = ALIGN(2);}
+  } ${RELOCATING+ > ${TEXT_MEMORY} =0xffffffff}
+
+  .rodata1 ${RELOCATING-0} :
+  {
+    *(.rodata1)
+    ${RELOCATING+. = ALIGN(2);}
+  } ${RELOCATING+ > ${TEXT_MEMORY} =0xffffffff}
+
+  /* Constructor and destructor tables are in ROM.  */
+  ${RELOCATING+${CTOR}}
+  ${RELOCATING+${DTOR}}
+
+  .jcr ${RELOCATING-0} :
+  {
+    KEEP (*(.jcr))
+  } ${RELOCATING+ > ${TEXT_MEMORY}}
+
+  /* Start of the data section image in ROM.  */
+  ${RELOCATING+__data_image = .;}
+  ${RELOCATING+PROVIDE (__data_image = .);}
+
+  /* All read-only sections that normally go in PROM must be above.
+     We construct the DATA image section in PROM at end of all these
+     read-only sections.  The data image must be copied at init time.
+     Refer to GNU ld, Section 3.6.8.2 Output Section LMA.  */
+  .data  ${RELOCATING-0} : ${RELOCATING+AT (__data_image)}
+  {
+    ${RELOCATING+__data_section_start = .;}
+    ${RELOCATING+PROVIDE (__data_section_start = .);}
+
+    ${RELOCATING+${DATA_START_SYMBOLS}}
+    ${RELOCATING+*(.sdata)}
+    *(.data)
+    ${RELOCATING+*(.data.*)}
+    ${RELOCATING+*(.data1)}
+    ${RELOCATING+*(.gnu.linkonce.d.*)}
+    ${CONSTRUCTING+CONSTRUCTORS}
+
+    ${RELOCATING+_edata  =  .;}
+    ${RELOCATING+PROVIDE (edata = .);}
+    ${RELOCATING+. = ALIGN(2);}
+  } ${RELOCATING+ > ${DATA_MEMORY} =0xffffffff}
+
+  ${RELOCATING+__data_section_size = SIZEOF(.data);}
+  ${RELOCATING+PROVIDE (__data_section_size = SIZEOF(.data));}
+  ${RELOCATING+__data_image_end = __data_image + __data_section_size;}
+
+  ${RELOCATING+${PRE_COMPUTE_DATA_SIZE}}
+
+  /* .install ${RELOCATING-0}:
+  {
+    . = _data_image_end;
+  } ${RELOCATING+ > ${TEXT_MEMORY}} */
+
+  /* Relocation for some bss and data sections.  */
+  ${RELOCATING-${BSS_DATA_RELOC}}
+  ${RELOCATING-${SOFT_REGS_RELOC}}
+
+  .bss ${RELOCATING-0} :
+  {
+    ${RELOCATING+__bss_start = .;}
+    ${RELOCATING+*(.softregs)}
+    ${RELOCATING+*(.sbss)}
+    ${RELOCATING+*(.scommon)}
+
+    *(.dynbss)
+    *(.bss)
+    ${RELOCATING+*(.bss.*)}
+    ${RELOCATING+*(.gnu.linkonce.b.*)}
+    *(COMMON)
+    ${RELOCATING+PROVIDE (_end = .);}
+  } ${RELOCATING+ > ${DATA_MEMORY}}
+  ${RELOCATING+__bss_size = SIZEOF(.bss);}
+  ${RELOCATING+PROVIDE (__bss_size = SIZEOF(.bss));}
+
+  .eeprom ${RELOCATING-0} :
+  {
+    *(.eeprom)
+    *(.eeprom.*)
+  } ${RELOCATING+ > ${EEPROM_MEMORY}}
+
+  ${RELOCATING+${VECTORS}}
+
+  /* Stabs debugging sections.  */
+  .stab		 0 : { *(.stab) }
+  .stabstr	 0 : { *(.stabstr) }
+  .stab.excl	 0 : { *(.stab.excl) }
+  .stab.exclstr	 0 : { *(.stab.exclstr) }
+  .stab.index	 0 : { *(.stab.index) }
+  .stab.indexstr 0 : { *(.stab.indexstr) }
+
+  .comment	 0 : { *(.comment) }
+
+  /* DWARF debug sections.
+     Symbols in the DWARF debugging sections are relative to the beginning
+     of the section so we begin them at 0.
+     Treatment of DWARF debug section must be at end of the linker
+     script to avoid problems when there are undefined symbols. It's necessary
+     to avoid that the DWARF section is relocated before such undefined
+     symbols are found.  */
+
+  /* DWARF 1 */
+  .debug	 0 : { *(.debug) }
+  .line		 0 : { *(.line) }
+
+  /* GNU DWARF 1 extensions */
+  .debug_srcinfo 0 : { *(.debug_srcinfo) }
+  .debug_sfnames 0 : { *(.debug_sfnames) }
+
+  /* DWARF 1.1 and DWARF 2 */
+  .debug_aranges  0 : { *(.debug_aranges) }
+  .debug_pubnames 0 : { *(.debug_pubnames) }
+
+  /* DWARF 2 */
+  .debug_info     0 : { *(.debug_info) *(.gnu.linkonce.wi.*) }
+  .debug_abbrev   0 : { *(.debug_abbrev) }
+  .debug_line     0 : { *(.debug_line) }
+  .debug_frame    0 : { *(.debug_frame) }
+  .debug_str      0 : { *(.debug_str) }
+  .debug_loc      0 : { *(.debug_loc) }
+  .debug_macinfo  0 : { *(.debug_macinfo) }
+}
+EOF