* Makefile.am (ALL_EMULATIONS): Add eelf32iq2000.o.

	(eelf32iq2000.c): New target.
	* Makefile.in: Regenerate.
	* configure.tgt: Handle iq2000-*-elf.
	* emulparams/elf32iq10.sh: New file.
	* emulparams/elf32iq2000.sh: New file.
	* scripttempl/iq2000.sc: New file.

1 files changed, 443 insertions, 0 deletions

diff --git a/ld/scripttempl/iq2000.sc b/ld/scripttempl/iq2000.sc
new file mode 100644
index 0000000..a07196a
--- /dev/null
+++ b/ld/scripttempl/iq2000.sc
@@ -0,0 +1,443 @@
+#
+# Unusual variables checked by this code:
+#	NOP - four byte opcode for no-op (defaults to 0)
+#	DATA_ADDR - if end-of-text-plus-one-page isn't right for data start
+#	INITIAL_READONLY_SECTIONS - at start of data segment
+#	OTHER_READONLY_SECTIONS - other than .text .init .rodata ...
+#		(e.g., .PARISC.milli)
+#	OTHER_TEXT_SECTIONS - these get put in .text when relocating
+#	OTHER_READWRITE_SECTIONS - other than .data .bss .ctors .sdata ...
+#		(e.g., .PARISC.global)
+#	OTHER_BSS_SECTIONS - other than .bss .sbss ...
+#	OTHER_SECTIONS - at the end
+#	EXECUTABLE_SYMBOLS - symbols that must be defined for an
+#		executable (e.g., _DYNAMIC_LINK)
+#	TEXT_START_SYMBOLS - symbols that appear at the start of the
+#		.text section.
+#	DATA_START_SYMBOLS - symbols that appear at the start of the
+#		.data section.
+#	OTHER_GOT_SYMBOLS - symbols defined just before .got.
+#	OTHER_GOT_SECTIONS - sections just after .got.
+#	OTHER_SDATA_SECTIONS - sections just after .sdata.
+#	OTHER_BSS_SYMBOLS - symbols that appear at the start of the
+#		.bss section besides __bss_start.
+#	DATA_PLT - .plt should be in data segment, not text segment.
+#	BSS_PLT - .plt should be in bss segment
+#	TEXT_DYNAMIC - .dynamic in text segment, not data segment.
+#	EMBEDDED - whether this is for an embedded system. 
+#	SHLIB_TEXT_START_ADDR - if set, add to SIZEOF_HEADERS to set
+#		start address of shared library.
+#	INPUT_FILES - INPUT command of files to always include
+#	WRITABLE_RODATA - if set, the .rodata section should be writable
+#	INIT_START, INIT_END -  statements just before and just after
+# 	combination of .init sections.
+#	FINI_START, FINI_END - statements just before and just after
+# 	combination of .fini sections.
+#
+# When adding sections, do note that the names of some sections are used
+# when specifying the start address of the next.
+#
+
+#  Many sections come in three flavours.  There is the 'real' section,
+#  like ".data".  Then there are the per-procedure or per-variable
+#  sections, generated by -ffunction-sections and -fdata-sections in GCC,
+#  and useful for --gc-sections, which for a variable "foo" might be
+#  ".data.foo".  Then there are the linkonce sections, for which the linker
+#  eliminates duplicates, which are named like ".gnu.linkonce.d.foo".
+#  The exact correspondences are:
+#
+#  Section	Linkonce section
+#  .text	.gnu.linkonce.t.foo
+#  .rodata	.gnu.linkonce.r.foo
+#  .data	.gnu.linkonce.d.foo
+#  .bss		.gnu.linkonce.b.foo
+#  .sdata	.gnu.linkonce.s.foo
+#  .sbss	.gnu.linkonce.sb.foo
+#  .sdata2	.gnu.linkonce.s2.foo
+#  .sbss2	.gnu.linkonce.sb2.foo
+#
+#  Each of these can also have corresponding .rel.* and .rela.* sections.
+
+test -z "$ENTRY" && ENTRY=_start
+test -z "${BIG_OUTPUT_FORMAT}" && BIG_OUTPUT_FORMAT=${OUTPUT_FORMAT}
+test -z "${LITTLE_OUTPUT_FORMAT}" && LITTLE_OUTPUT_FORMAT=${OUTPUT_FORMAT}
+if [ -z "$MACHINE" ]; then OUTPUT_ARCH=${ARCH}; else OUTPUT_ARCH=${ARCH}:${MACHINE}; fi
+test -z "${ELFSIZE}" && ELFSIZE=32
+test -z "${ALIGNMENT}" && ALIGNMENT="${ELFSIZE} / 8"
+test "$LD_FLAG" = "N" && DATA_ADDR=.
+INTERP=".interp   ${RELOCATING-0} : { *(.interp) 	}"
+PLT=".plt    ${RELOCATING-0} : { *(.plt)	}"
+DYNAMIC=".dynamic     ${RELOCATING-0} : { *(.dynamic) }"
+RODATA=".rodata ${RELOCATING-0} : { *(.rodata) ${RELOCATING+*(.rodata.*)} ${RELOCATING+*(.gnu.linkonce.r.*)} }"
+SBSS2=".sbss2 ${RELOCATING-0} : { *(.sbss2) ${RELOCATING+*(.sbss2.*)} ${RELOCATING+*(.gnu.linkonce.sb2.*)} }"
+SDATA2=".sdata2 ${RELOCATING-0} : { *(.sdata2) ${RELOCATING+*(.sdata2.*)} ${RELOCATING+*(.gnu.linkonce.s2.*)} }"
+CTOR=".ctors ${CONSTRUCTING-0} : 
+  {
+    ${CONSTRUCTING+${CTOR_START}}
+    /* gcc uses crtbegin.o to find the start of
+       the constructors, so we make sure it is
+       first.  Because this is a wildcard, it
+       doesn't matter if the user does not
+       actually link against crtbegin.o; the
+       linker won't look for a file to match a
+       wildcard.  The wildcard also means that it
+       doesn't matter which directory crtbegin.o
+       is in.  */
+
+    KEEP (*crtbegin.o(.ctors))
+
+    /* We don't want to include the .ctor section from
+       from the crtend.o file until after the sorted ctors.
+       The .ctor section from the crtend file contains the
+       end of ctors marker and it must be last */
+
+    KEEP (*(EXCLUDE_FILE (*crtend.o $OTHER_EXCLUDE_FILES) .ctors))
+    KEEP (*(SORT(.ctors.*)))
+    KEEP (*(.ctors))
+    ${CONSTRUCTING+${CTOR_END}}
+  }"
+
+DTOR=" .dtors       ${CONSTRUCTING-0} :
+  {
+    ${CONSTRUCTING+${DTOR_START}}
+    KEEP (*crtbegin.o(.dtors))
+    KEEP (*(EXCLUDE_FILE (*crtend.o $OTHER_EXCLUDE_FILES) .dtors))
+    KEEP (*(SORT(.dtors.*)))
+    KEEP (*(.dtors))
+    ${CONSTRUCTING+${DTOR_END}}
+  }"
+
+# if this is for an embedded system, don't add SIZEOF_HEADERS.
+if [ -z "$EMBEDDED" ]; then
+   test -z "${TEXT_BASE_ADDRESS}" && TEXT_BASE_ADDRESS="${TEXT_START_ADDR} + SIZEOF_HEADERS"
+else
+   test -z "${TEXT_BASE_ADDRESS}" && TEXT_BASE_ADDRESS="${TEXT_START_ADDR}"
+fi
+
+cat <<EOF
+OUTPUT_FORMAT("${OUTPUT_FORMAT}", "${BIG_OUTPUT_FORMAT}",
+	      "${LITTLE_OUTPUT_FORMAT}")
+OUTPUT_ARCH(${OUTPUT_ARCH})
+ENTRY(${ENTRY})
+
+${RELOCATING+${LIB_SEARCH_DIRS}}
+${RELOCATING+/* Do we need any of these for elf?
+   __DYNAMIC = 0; ${STACKZERO+${STACKZERO}} ${SHLIB_PATH+${SHLIB_PATH}}  */}
+${RELOCATING+${EXECUTABLE_SYMBOLS}}
+${RELOCATING+${INPUT_FILES}}
+${RELOCATING- /* For some reason, the Solaris linker makes bad executables
+  if gld -r is used and the intermediate file has sections starting
+  at non-zero addresses.  Could be a Solaris ld bug, could be a GNU ld
+  bug.  But for now assigning the zero vmas works.  */}
+
+SECTIONS
+{
+  ${CREATE_SHLIB-${RELOCATING+. = ${TEXT_BASE_ADDRESS};}}
+  ${CREATE_SHLIB+${RELOCATING+. = ${SHLIB_TEXT_START_ADDR:-0} + SIZEOF_HEADERS;}}
+  ${CREATE_SHLIB-${INTERP}}
+  ${TEXT_DYNAMIC+${DYNAMIC}}
+
+EOF
+if [ "x$COMBRELOC" = x ]; then
+  COMBRELOCCAT=cat
+else
+  COMBRELOCCAT="cat > $COMBRELOC"
+fi
+eval $COMBRELOCCAT <<EOF
+  .rel.init    ${RELOCATING-0} : { *(.rel.init)	}
+  .rela.init   ${RELOCATING-0} : { *(.rela.init)	}
+  .rel.text    ${RELOCATING-0} :
+    {
+      *(.rel.text)
+      ${RELOCATING+*(.rel.text.*)}
+      ${RELOCATING+*(.rel.gnu.linkonce.t.*)}
+    }
+  .rela.text   ${RELOCATING-0} :
+    {
+      *(.rela.text)
+      ${RELOCATING+*(.rela.text.*)}
+      ${RELOCATING+*(.rela.gnu.linkonce.t.*)}
+    }
+  .rel.fini    ${RELOCATING-0} : { *(.rel.fini)	}
+  .rela.fini   ${RELOCATING-0} : { *(.rela.fini)	}
+  .rel.rodata  ${RELOCATING-0} :
+    {
+      *(.rel.rodata)
+      ${RELOCATING+*(.rel.rodata.*)}
+      ${RELOCATING+*(.rel.gnu.linkonce.r.*)}
+    }
+  .rela.rodata ${RELOCATING-0} :
+    {
+      *(.rela.rodata)
+      ${RELOCATING+*(.rela.rodata.*)}
+      ${RELOCATING+*(.rela.gnu.linkonce.r.*)}
+    }
+  ${OTHER_READONLY_RELOC_SECTIONS}
+  .rel.data    ${RELOCATING-0} :
+    {
+      *(.rel.data)
+      ${RELOCATING+*(.rel.data.*)}
+      ${RELOCATING+*(.rel.gnu.linkonce.d.*)}
+    }
+  .rela.data   ${RELOCATING-0} :
+    {
+      *(.rela.data)
+      ${RELOCATING+*(.rela.data.*)}
+      ${RELOCATING+*(.rela.gnu.linkonce.d.*)}
+    }
+  .rel.ctors   ${RELOCATING-0} : { *(.rel.ctors)	}
+  .rela.ctors  ${RELOCATING-0} : { *(.rela.ctors)	}
+  .rel.dtors   ${RELOCATING-0} : { *(.rel.dtors)	}
+  .rela.dtors  ${RELOCATING-0} : { *(.rela.dtors)	}
+  .rel.got     ${RELOCATING-0} : { *(.rel.got)		}
+  .rela.got    ${RELOCATING-0} : { *(.rela.got)		}
+  ${OTHER_GOT_RELOC_SECTIONS}
+  .rel.sdata   ${RELOCATING-0} :
+    {
+      *(.rel.sdata)
+      ${RELOCATING+*(.rel.sdata.*)}
+      ${RELOCATING+*(.rel.gnu.linkonce.s.*)}
+    }
+  .rela.sdata   ${RELOCATING-0} :
+    {
+      *(.rela.sdata)
+      ${RELOCATING+*(.rela.sdata.*)}
+      ${RELOCATING+*(.rela.gnu.linkonce.s.*)}
+    }
+  .rel.sbss    ${RELOCATING-0} :
+    { 
+      *(.rel.sbss)
+      ${RELOCATING+*(.rel.sbss.*)}
+      ${RELOCATING+*(.rel.gnu.linkonce.sb.*)}
+    }
+  .rela.sbss   ${RELOCATING-0} :
+    {
+      *(.rela.sbss)
+      ${RELOCATING+*(.rela.sbss.*)}
+      ${RELOCATING+*(.rela.gnu.linkonce.sb.*)}
+    }
+  .rel.sdata2  ${RELOCATING-0} : 
+    { 
+      *(.rel.sdata2)
+      ${RELOCATING+*(.rel.sdata2.*)}
+      ${RELOCATING+*(.rel.gnu.linkonce.s2.*)}
+    }
+  .rela.sdata2 ${RELOCATING-0} : 
+    {
+      *(.rela.sdata2)
+      ${RELOCATING+*(.rela.sdata2.*)}
+      ${RELOCATING+*(.rela.gnu.linkonce.s2.*)}
+    }
+  .rel.sbss2   ${RELOCATING-0} : 
+    { 
+      *(.rel.sbss2)	
+      ${RELOCATING+*(.rel.sbss2.*)}
+      ${RELOCATING+*(.rel.gnu.linkonce.sb2.*)}
+    }
+  .rela.sbss2  ${RELOCATING-0} : 
+    { 
+      *(.rela.sbss2)	
+      ${RELOCATING+*(.rela.sbss2.*)}
+      ${RELOCATING+*(.rela.gnu.linkonce.sb2.*)}
+    }
+  .rel.bss     ${RELOCATING-0} : 
+    { 
+      *(.rel.bss)
+      ${RELOCATING+*(.rel.bss.*)}
+      ${RELOCATING+*(.rel.gnu.linkonce.b.*)}
+    }
+  .rela.bss    ${RELOCATING-0} : 
+    { 
+      *(.rela.bss)
+      ${RELOCATING+*(.rela.bss.*)}
+      ${RELOCATING+*(.rela.gnu.linkonce.b.*)}
+    }
+EOF
+if [ -n "$COMBRELOC" ]; then
+cat <<EOF
+  .rel.dyn	 :
+    {
+EOF
+sed -e '/^[ 	]*[{}][ 	]*$/d;/:[ 	]*$/d;/\.rela\./d;s/^.*: { *\(.*\)}$/      \1/' $COMBRELOC
+cat <<EOF
+    }
+  .rela.dyn	 :
+    {
+EOF
+sed -e '/^[ 	]*[{}][ 	]*$/d;/:[ 	]*$/d;/\.rel\./d;s/^.*: { *\(.*\)}/      \1/' $COMBRELOC
+cat <<EOF
+    }
+EOF
+fi
+cat <<EOF
+  .rel.plt     ${RELOCATING-0} : { *(.rel.plt)		}
+  .rela.plt    ${RELOCATING-0} : { *(.rela.plt)		}
+  ${OTHER_PLT_RELOC_SECTIONS}
+
+  .init        ${RELOCATING-0} : 
+  { 
+    ${RELOCATING+${INIT_START}}
+    KEEP (*(.init))
+    ${RELOCATING+${INIT_END}}
+  } =${NOP-0}
+
+  ${DATA_PLT-${BSS_PLT-${PLT}}}
+  .text    ${RELOCATING-0} :
+  {
+    ${RELOCATING+${TEXT_START_SYMBOLS}}
+    *(.text)
+    ${RELOCATING+*(.text.*)}
+    *(.stub)
+    /* .gnu.warning sections are handled specially by elf32.em.  */
+    *(.gnu.warning)
+    ${RELOCATING+*(.gnu.linkonce.t.*)}
+    ${RELOCATING+${OTHER_TEXT_SECTIONS}}
+  } =${NOP-0}
+  .fini    ${RELOCATING-0} :
+  {
+    ${RELOCATING+${FINI_START}}
+    KEEP (*(.fini))
+    ${RELOCATING+${FINI_END}}
+  } =${NOP-0}
+  ${RELOCATING+PROVIDE (__etext = .);}
+  ${RELOCATING+PROVIDE (_etext = .);}
+  ${RELOCATING+PROVIDE (etext = .);}
+
+  /* Adjust the address for the data segment.  We want to adjust up to
+     the same address within the page on the next page up.  */
+  ${CREATE_SHLIB-${RELOCATING+. = ${DATA_ADDR-ALIGN(${MAXPAGESIZE}) + (. & (${MAXPAGESIZE} - 1))};}}
+  ${CREATE_SHLIB+${RELOCATING+. = ${SHLIB_DATA_ADDR-ALIGN(${MAXPAGESIZE}) + (. & (${MAXPAGESIZE} - 1))};}}
+
+  .data  ${RELOCATING-0} :
+  {
+    ${RELOCATING+${DATA_START_SYMBOLS}}
+    *(.data)
+    ${RELOCATING+*(.data.*)}
+    ${RELOCATING+*(.gnu.linkonce.d.*)}
+    ${CONSTRUCTING+SORT(CONSTRUCTORS)}
+  }
+  .data1 ${RELOCATING-0} : { *(.data1) }
+  .eh_frame ${RELOCATING-0} : 
+  { 
+    ${RELOCATING+PROVIDE (__eh_frame_begin = .);}
+    *(.eh_frame) 
+    LONG (0);
+    ${RELOCATING+PROVIDE (__eh_frame_end = .);}
+  } ${RELOCATING+}
+  .gcc_except_table : { *(.gcc_except_table) }
+  ${INITIAL_READONLY_SECTIONS}
+  .hash        ${RELOCATING-0} : { *(.hash)		}
+  .dynsym      ${RELOCATING-0} : { *(.dynsym)		}
+  .dynstr      ${RELOCATING-0} : { *(.dynstr)		}
+  .gnu.version ${RELOCATING-0} : { *(.gnu.version)	}
+  .gnu.version_d ${RELOCATING-0} : { *(.gnu.version_d)	}
+  .gnu.version_r ${RELOCATING-0} : { *(.gnu.version_r)	}
+  ${RODATA}
+  .rodata1 ${RELOCATING-0} : { *(.rodata1) }
+  ${CREATE_SHLIB-${SDATA2}}
+  ${CREATE_SHLIB-${SBSS2}}
+  ${RELOCATING+${OTHER_READONLY_SECTIONS}}
+  ${RELOCATING+${OTHER_READWRITE_SECTIONS}}
+  ${TEXT_DYNAMIC-${DYNAMIC}}
+  ${RELOCATING+${CTOR}}
+  ${RELOCATING+${DTOR}}
+  .jcr : { KEEP (*(.jcr)) }
+  ${DATA_PLT+${PLT}}
+  ${RELOCATING+${OTHER_GOT_SYMBOLS}}
+  .got		${RELOCATING-0} : { *(.got.plt) *(.got) }
+  ${RELOCATING+${OTHER_GOT_SECTIONS}}
+  ${CREATE_SHLIB+${SDATA2}}
+  ${CREATE_SHLIB+${SBSS2}}
+  /* We want the small data sections together, so single-instruction offsets
+     can access them all, and initialized data all before uninitialized, so
+     we can shorten the on-disk segment size.  */
+  .sdata   ${RELOCATING-0} : 
+  {
+    ${RELOCATING+${SDATA_START_SYMBOLS}}
+    *(.sdata) 
+    ${RELOCATING+*(.sdata.*)}
+    ${RELOCATING+*(.gnu.linkonce.s.*)}
+  }
+  ${RELOCATING+${OTHER_SDATA_SECTIONS}}
+  ${RELOCATING+_edata = .;}
+  ${RELOCATING+PROVIDE (edata = .);}
+  ${RELOCATING+__bss_start = .;}
+  ${RELOCATING+${OTHER_BSS_SYMBOLS}}
+  .sbss    ${RELOCATING-0} :
+  {
+    ${RELOCATING+PROVIDE (__sbss_start = .);}
+    ${RELOCATING+PROVIDE (___sbss_start = .);}
+    *(.dynsbss)
+    *(.sbss)
+    ${RELOCATING+*(.sbss.*)}
+    ${RELOCATING+*(.gnu.linkonce.sb.*)}
+    *(.scommon)
+    ${RELOCATING+PROVIDE (__sbss_end = .);}
+    ${RELOCATING+PROVIDE (___sbss_end = .);}
+  }
+  ${BSS_PLT+${PLT}}
+  .bss     ${RELOCATING-0} :
+  {
+   *(.dynbss)
+   *(.bss)
+   ${RELOCATING+*(.bss.*)}
+   ${RELOCATING+*(.gnu.linkonce.b.*)}
+   *(COMMON)
+   /* Align here to ensure that the .bss section occupies space up to
+      _end.  Align after .bss to ensure correct alignment even if the
+      .bss section disappears because there are no input sections.  */
+   ${RELOCATING+. = ALIGN(${ALIGNMENT});}
+  }
+  ${RELOCATING+${OTHER_BSS_SECTIONS}}
+  ${RELOCATING+. = ALIGN(${ALIGNMENT});}
+  ${RELOCATING+_end = .;}
+  ${RELOCATING+${OTHER_BSS_END_SYMBOLS}}
+  ${RELOCATING+PROVIDE (end = .);}
+
+  /* Stabs debugging sections.  */
+  .stab 0 : { *(.stab) }
+  .stabstr 0 : { *(.stabstr) }
+  .stab.excl 0 : { *(.stab.excl) }
+  .stab.exclstr 0 : { *(.stab.exclstr) }
+  .stab.index 0 : { *(.stab.index) }
+  .stab.indexstr 0 : { *(.stab.indexstr) }
+
+  .comment 0 : { *(.comment) }
+
+  /* DWARF debug sections.
+     Symbols in the DWARF debugging sections are relative to the beginning
+     of the section so we begin them at 0.  */
+
+  /* DWARF 1 */
+  .debug          0 : { *(.debug) }
+  .line           0 : { *(.line) }
+
+  /* GNU DWARF 1 extensions */
+  .debug_srcinfo  0 : { *(.debug_srcinfo) }
+  .debug_sfnames  0 : { *(.debug_sfnames) }
+
+  /* DWARF 1.1 and DWARF 2 */
+  .debug_aranges  0 : { *(.debug_aranges) }
+  .debug_pubnames 0 : { *(.debug_pubnames) }
+
+  /* DWARF 2 */
+  .debug_info     0 : { *(.debug_info) *(.gnu.linkonce.wi.*) }
+  .debug_abbrev   0 : { *(.debug_abbrev) }
+  .debug_line     0 : { *(.debug_line) }
+  .debug_frame    0 : { *(.debug_frame) }
+  .debug_str      0 : { *(.debug_str) }
+  .debug_loc      0 : { *(.debug_loc) }
+  .debug_macinfo  0 : { *(.debug_macinfo) }
+
+  /* SGI/MIPS DWARF 2 extensions */
+  .debug_weaknames 0 : { *(.debug_weaknames) }
+  .debug_funcnames 0 : { *(.debug_funcnames) }
+  .debug_typenames 0 : { *(.debug_typenames) }
+  .debug_varnames  0 : { *(.debug_varnames) }
+
+  ${RELOCATING+${OTHER_RELOCATING_SECTIONS}}
+
+  /* These must appear regardless of ${RELOCATING}.  */
+  ${OTHER_SECTIONS}
+}
+EOF