* ld.texinfo: Document PowerPC and PowerPC64 options.

	* gen-doc.texi: Enable.

1 files changed, 194 insertions, 0 deletions

diff --git a/ld/ld.texinfo b/ld/ld.texinfo
index 4bf5a2c..07bb0c3 100644
--- a/ld/ld.texinfo
+++ b/ld/ld.texinfo
@@ -40,6 +40,8 @@
 @set MSP430
 @set PDP11
 @set PJ
+@set POWERPC
+@set POWERPC64
 @set SH
 @set SPARC
 @set TIC54X
@@ -156,6 +158,12 @@ section entitled ``GNU Free Documentation License''.
 @ifset M68HC11
 * M68HC11/68HC12::              ld and the Motorola 68HC11 and 68HC12 families
 @end ifset
+@ifset POWERPC
+* PowerPC ELF32::               ld and PowerPC 32-bit ELF Support
+@end ifset
+@ifset POWERPC64
+* PowerPC64 ELF64::             ld and PowerPC64 64-bit ELF Support
+@end ifset
 @ifset TICOFF
 * TI COFF::                     ld and the TI COFF
 @end ifset
@@ -1383,6 +1391,9 @@ This option is only supported on a few targets.
 @ifset M68HC11
 @xref{M68HC11/68HC12,,@command{ld} and the 68HC11 and 68HC12}.
 @end ifset
+@ifset POWERPC
+@xref{PowerPC ELF32,,@command{ld} and PowerPC 32-bit ELF Support}.
+@end ifset
 
 On some platforms, the @samp{--relax} option performs global
 optimizations that become possible when the linker resolves addressing
@@ -5111,6 +5122,12 @@ functionality are not listed.
 @ifset M68HC11
 * M68HC11/68HC12::		@code{ld} and the Motorola 68HC11 and 68HC12 families
 @end ifset
+@ifset POWERPC
+* PowerPC ELF32::		@command{ld} and PowerPC 32-bit ELF Support
+@end ifset
+@ifset POWERPC64
+* PowerPC64 ELF64::		@command{ld} and PowerPC64 64-bit ELF Support
+@end ifset
 @ifset TICOFF
 * TI COFF::                     @command{ld} and TI COFF
 @end ifset
@@ -5502,6 +5519,183 @@ The last two sections are used by gcc.
 @end ifclear
 @end ifset
 
+@ifset POWERPC
+@ifclear GENERIC
+@raisesections
+@end ifclear
+
+@node PowerPC ELF32
+@section @command{ld} and PowerPC 32-bit ELF Support
+@cindex PowerPC long branches
+@kindex --relax on PowerPC
+Branches on PowerPC processors are limited to a signed 26-bit
+displacement, which may result in @command{ld} giving
+@samp{relocation truncated to fit} errors with very large programs.
+@samp{--relax} enables the generation of trampolines that can access
+the entire 32-bit address space.  These trampolines are inserted at
+section boundaries, so may not themselves be reachable if an input
+section exceeds 33M in size.
+
+@cindex PowerPC ELF32 options
+@table @option
+@cindex PowerPC PLT
+@kindex --bss-plt
+@item --bss-plt
+Current PowerPC GCC accepts a @samp{-msecure-plt} option that
+generates code capable of using a newer PLT and GOT layout that has
+the security advantage of no executable section ever needing to be
+writable and no writable section ever being executable.  PowerPC
+@command{ld} will generate this layout, including stubs to access the
+PLT, if all input files (including startup and static libraries) were
+compiled with @samp{-msecure-plt}.  @samp{--bss-plt} forces the old
+BSS PLT (and GOT layout) which can give slightly better performance.
+
+@cindex PowerPC GOT
+@kindex --sdata-got
+@item --sdata-got
+The new secure PLT and GOT are placed differently relative to other
+sections compared to older BSS PLT and GOT placement.  The location of
+@code{.plt} must change because the new secure PLT is an initialized
+section while the old PLT is uninitialized.  The reason for the
+@code{.got} change is more subtle:  The new placement allows
+@code{.got} to be read-only in applications linked with
+@samp{-z relro -z now}.  However, this placement means that
+@code{.sdata} cannot always be used in shared libraries, because the
+PowerPC ABI accesses @code{.sdata} in shared libraries from the GOT
+pointer.  @samp{--sdata-got} forces the old GOT placement.  PowerPC
+GCC doesn't use @code{.sdata} in shared libraries, so this option is
+really only useful for other compilers that may do so.
+
+@cindex PowerPC stub symbols
+@kindex --emit-stub-syms
+@item --emit-stub-syms
+This option causes @command{ld} to label linker stubs with a local
+symbol that encodes the stub type and destination.
+
+@cindex PowerPC TLS optimization
+@kindex --no-tls-optimize
+@item --no-tls-optimize
+PowerPC @command{ld} normally performs some optimization of code
+sequences used to access Thread-Local Storage.  Use this option to
+disable the optimization.
+@end table
+
+@ifclear GENERIC
+@lowersections
+@end ifclear
+@end ifset
+
+@ifset POWERPC64
+@ifclear GENERIC
+@raisesections
+@end ifclear
+
+@node PowerPC64 ELF64
+@section @command{ld} and PowerPC64 64-bit ELF Support
+
+@cindex PowerPC64 ELF64 options
+@table @option
+@cindex PowerPC64 stub grouping
+@kindex --stub-group-size
+@item --stub-group-size
+Long branch stubs, PLT call stubs  and TOC adjusting stubs are placed
+by @command{ld} in stub sections located between groups of input sections.
+@samp{--stub-group-size} specifies the maximum size of a group of input
+sections handled by one stub section.  Since branch offsets are signed,
+a stub section may serve two groups of input sections, one group before
+the stub section, and one group after it.  However, when using
+conditional branches that require stubs, it may be better (for branch
+prediction) that stub sections only serve one group of input sections.
+A negative value for @samp{N} chooses this scheme, ensuring that
+branches to stubs always use a negative offset.  Two special values of
+@samp{N} are recognized, @samp{1} and @samp{-1}.  These both instruct
+@command{ld} to automatically size input section groups for the branch types
+detected, with the same behaviour regarding stub placement as other
+positive or negative values of @samp{N} respectively.
+
+Note that @samp{--stub-group-size} does not split input sections.  A
+single input section larger than the group size specified will of course
+create a larger group (of one section).  If input sections are too
+large, it may not be possible for a branch to reach its stub.
+
+@cindex PowerPC64 stub symbols
+@kindex --emit-stub-syms
+@item --emit-stub-syms
+This option causes @command{ld} to label linker stubs with a local
+symbol that encodes the stub type and destination.
+
+@cindex PowerPC64 dot symbols
+@kindex --dotsyms
+@kindex --no-dotsyms
+@item --dotsyms, --no-dotsyms
+These two options control how @command{ld} interprets version patterns
+in a version script.  Older PowerPC64 compilers emitted both a
+function descriptor symbol with the same name as the function, and a
+code entry symbol with the name prefixed by a dot (@samp{.}).  To
+properly version a function @samp{foo}, the version script thus needs
+to control both @samp{foo} and @samp{.foo}.  The option
+@samp{--dotsyms}, on by default, automatically adds the required
+dot-prefixed patterns.  Use @samp{--no-dotsyms} to disable this
+feature.
+
+@cindex PowerPC64 TLS optimization
+@kindex --no-tls-optimize
+@item --no-tls-optimize
+PowerPC64 @command{ld} normally performs some optimization of code
+sequences used to access Thread-Local Storage.  Use this option to
+disable the optimization.
+
+@cindex PowerPC64 OPD optimization
+@kindex --no-opd-optimize
+@item --no-opd-optimize
+PowerPC64 @command{ld} normally removes @code{.opd} section entries
+corresponding to deleted link-once functions, or functions removed by
+the action of @samp{--gc-sections} or linker scrip @code{/DISCARD/}.
+Use this option to disable @code{.opd} optimization.
+
+@cindex PowerPC64 OPD spacing
+@kindex --non-overlapping-opd
+@item --non-overlapping-opd
+Some PowerPC64 compilers have an option to generate compressed
+@code{.opd} entries spaced 16 bytes apart, overlapping the third word,
+the static chain pointer (unused in C) with the first word of the next
+entry.  This option expands such entries to the full 24 bytes.
+
+@cindex PowerPC64 TOC optimization
+@kindex --no-toc-optimize
+@item --no-toc-optimize
+PowerPC64 @command{ld} normally removes unused @code{.toc} section
+entries.  Such entries are detected by examining relocations that
+reference the TOC in code sections.  A reloc in a deleted code section
+marks a TOC word as unneeded, while a reloc in a kept code section
+marks a TOC word as needed.  Since the TOC may reference itself, TOC
+relocs are also examined.  TOC words marked as both needed and
+unneeded will of course be kept.  TOC words without any referencing
+reloc are assumed to be part of a multi-word entry, and are kept or
+discarded as per the nearest marked preceding word.  This works
+reliably for compiler generated code, but may be incorrect if assembly
+code is used to insert TOC entries.  Use this option to disable the
+optimization.
+
+@cindex PowerPC64 multi-TOC
+@kindex --no-multi-toc
+@item --no-multi-toc
+By default, PowerPC64 GCC generates code for a TOC model where TOC
+entries are accessed with a 16-bit offset from r2.  This limits the
+total TOC size to 64K.  PowerPC64 @command{ld} extends this limit by
+grouping code sections such that each group uses less than 64K for its
+TOC entries, then inserts r2 adjusting stubs between inter-group
+calls.  @command{ld} does not split apart input sections, so cannot
+help if a single input file has a @code{.toc} section that exceeds
+64K, most likely from linking multiple files with @command{ld -r}.
+Use this option to turn off this feature.
+@end table
+
+@ifclear GENERIC
+@lowersections
+@end ifclear
+@end ifset
+
 @ifset TICOFF
 @ifclear GENERIC
 @raisesections