Remove m68k-aout and m68k-coff support

include/
	* aout/host.h: Remove m68k-aout and m68k-coff support.
	* aout/hp300hpux.h: Delete.
	* coff/apollo.h: Delete.
	* coff/aux-coff.h: Delete.
	* coff/m68k.h: Delete.
bfd/
	* Makefile.am: Remove m68k-aout and m68k-coff support.
	* aoutf1.h: Likewise.
	* aoutx.h: Likewise.
	* archive.c: Likewise.
	* bfd-in.h: Likewise.
	* bfd.c: Likewise.
	* coffcode.h: Likewise.
	* coffswap.h: Likewise.
	* config.bfd: Likewise.
	* configure.ac: Likewise.
	* configure.host: Likewise.
	* doc/bfd.texinfo: Likewise.
	* doc/bfdint.texi: Likewise.
	* freebsd.h: Likewise.
	* gen-aout.c: Likewise.
	* hpux-core.c: Likewise.
	* libaout.h: Likewise.
	* libbfd-in.h: Likewise.
	* pdp11.c: Likewise.
	* peicode.h: Likewise.
	* riscix.c: Likewise.
	* targets.c: Likewise.
	* aout0.c: Delete.
	* coff-apollo.c: Delete.
	* coff-aux.c: Delete.
	* coff-m68k.c: Delete.
	* coff-svm68k.c: Delete.
	* coff-u68k.c: Delete.
	* hosts/delta68.h: Delete.
	* hosts/hp300bsd.h: Delete.
	* hosts/m68kaux.h: Delete.
	* hosts/news.h: Delete.
	* hp300bsd.c: Delete.
	* hp300hpux.c: Delete.
	* liboasys.h: Delete.
	* m68k4knetbsd.c: Delete.
	* m68klinux.c: Delete.
	* m68knetbsd.c: Delete.
	* oasys.c: Delete.
	* versados.c: Delete.
	* Makefile.in: Regenerate.
	* bfd-in2.h: Regenerate.
	* configure: Regenerate.
	* libbfd.h: Regenerate.
	* po/SRC-POTFILES.in: Regenerate.
binutils/
	* testsuite/binutils-all/copy-2.d: Remove m68k-aout and m68k-coff
	support.
	* testsuite/binutils-all/copy-3.d: Likewise.
	* testsuite/binutils-all/objcopy.exp: Likewise.
	* testsuite/lib/binutils-common.exp: Likewise.
gas/
	* Makefile.am: Remove m68k-aout and m68k-coff support.
	* config/tc-m68k.c: Likewise.
	* config/tc-m68k.h: Likewise.
	* configure.ac: Likewise.
	* configure.tgt: Likewise.
	* testsuite/gas/all/weakref1u.d: Likewise.
	* testsuite/gas/m68k/all.exp: Likewise.
	* testsuite/gas/m68k/br-isaa.d: Likewise.
	* testsuite/gas/m68k/br-isab.d: Likewise.
	* testsuite/gas/m68k/br-isac.d: Likewise.
	* config/te-psos.h: Delete.
	* config/te-sun3.h: Delete.
	* testsuite/gas/m68k-coff/gas.exp: Delete.
	* testsuite/gas/m68k-coff/p2389.s: Delete.
	* testsuite/gas/m68k-coff/p2389a.s: Delete.
	* testsuite/gas/m68k-coff/p2430.s: Delete.
	* testsuite/gas/m68k-coff/p2430a.s: Delete.
	* testsuite/gas/m68k-coff/t1.s: Delete.
	* testsuite/gas/m68k/p3041.d: Delete.
	* testsuite/gas/m68k/p3041.s: Delete.
	* testsuite/gas/m68k/p3041data.d: Delete.
	* testsuite/gas/m68k/p3041data.s: Delete.
	* testsuite/gas/m68k/p3041pcrel.d: Delete.
	* testsuite/gas/m68k/p3041pcrel.s: Delete.
	* testsuite/gas/m68k/t2.d: Delete.
	* Makefile.in: Regenerate.
	* config.in: Regenerate.
	* configure: Regenerate.
	* po/POTFILES.in: Regenerate.
ld/
	* Makefile.am: Remove m68k-aout and m68k-coff support.
	* configure.tgt: Likewise.
	* emultempl/m68kelf.em: Likewise.
	* ld.texinfo: Likewise.
	* mri.c: Likewise.
	* emulparams/delta68.sh: Delete.
	* emulparams/hp300bsd.sh: Delete.
	* emulparams/hp3hpux.sh: Delete.
	* emulparams/m68k4knbsd.sh: Delete.
	* emulparams/m68kaout.sh: Delete.
	* emulparams/m68kaux.sh: Delete.
	* emulparams/m68kcoff.sh: Delete.
	* emulparams/m68klinux.sh: Delete.
	* emulparams/m68knbsd.sh: Delete.
	* emulparams/m68kpsos.sh: Delete.
	* emulparams/sun3.sh: Delete.
	* emultempl/m68kcoff.em: Delete.
	* scripttempl/delta68.sc: Delete.
	* scripttempl/m68kaux.sc: Delete.
	* scripttempl/m68kcoff.sc: Delete.
	* scripttempl/psos.sc: Delete.
	* testsuite/ld-versados/t1-1.ro: Delete.
	* testsuite/ld-versados/t1-2.ro: Delete.
	* testsuite/ld-versados/t1.ld: Delete.
	* testsuite/ld-versados/t1.ook: Delete.
	* testsuite/ld-versados/t2-1.ro: Delete.
	* testsuite/ld-versados/t2-2.ro: Delete.
	* testsuite/ld-versados/t2-3.ro: Delete.
	* testsuite/ld-versados/t2.ld: Delete.
	* testsuite/ld-versados/t2.ook: Delete.
	* testsuite/ld-versados/versados.exp: Delete.
	* Makefile.in: Regenerate.
	* po/BLD-POTFILES.in: Regenerate.

2 files changed, 3 insertions, 271 deletions

diff --git a/ld/emultempl/m68kcoff.em b/ld/emultempl/m68kcoff.em
deleted file mode 100644
index 1e36f3f..0000000
--- a/ld/emultempl/m68kcoff.em
+++ /dev/null
@@ -1,247 +0,0 @@
-# This shell script emits a C file. -*- C -*-
-# It does some substitutions.
-fragment <<EOF
-/* This file is is generated by a shell script.  DO NOT EDIT! */
-
-/* Handle embedded relocs for m68k.
-   Copyright (C) 2000-2018 Free Software Foundation, Inc.
-   Written by Michael Sokolov <msokolov@ivan.Harhan.ORG>, based on generic.em
-   by Steve Chamberlain <steve@cygnus.com>, embedded relocs code based on
-   mipsecoff.em by Ian Lance Taylor <ian@cygnus.com> (now removed).
-
-   This file is part of the GNU Binutils.
-
-   This program is free software; you can redistribute it and/or modify
-   it under the terms of the GNU General Public License as published by
-   the Free Software Foundation; either version 3 of the License, or
-   (at your option) any later version.
-
-   This program is distributed in the hope that it will be useful,
-   but WITHOUT ANY WARRANTY; without even the implied warranty of
-   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-   GNU General Public License for more details.
-
-   You should have received a copy of the GNU General Public License
-   along with this program; if not, write to the Free Software
-   Foundation, Inc., 51 Franklin Street - Fifth Floor, Boston,
-   MA 02110-1301, USA.  */
-
-#define TARGET_IS_${EMULATION_NAME}
-
-#include "sysdep.h"
-#include "bfd.h"
-#include "bfdlink.h"
-
-#include "ld.h"
-#include "ldmain.h"
-#include "ldexp.h"
-#include "ldlang.h"
-#include "ldfile.h"
-#include "ldemul.h"
-#include "ldmisc.h"
-
-static void check_sections (bfd *, asection *, void *);
-
-static void
-gld${EMULATION_NAME}_before_parse (void)
-{
-#ifndef TARGET_			/* I.e., if not generic.  */
-  ldfile_set_output_arch ("`echo ${ARCH}`", bfd_arch_unknown);
-#endif /* not TARGET_ */
-}
-
-/* This function is run after all the input files have been opened.
-   We create a .emreloc section for each input file with a non zero
-   .data section.  The BFD backend will fill in these sections with
-   magic numbers which can be used to relocate the data section at run
-   time.  */
-
-static void
-gld${EMULATION_NAME}_after_open (void)
-{
-  bfd *abfd;
-
-  after_open_default ();
-
-  if (! command_line.embedded_relocs
-      || bfd_link_relocatable (&link_info))
-    return;
-
-  for (abfd = link_info.input_bfds; abfd != NULL; abfd = abfd->link.next)
-    {
-      asection *datasec;
-
-      /* As first-order business, make sure that each input BFD is COFF. It
-	 better be, as we are directly calling a COFF backend function.  */
-      if (bfd_get_flavour (abfd) != bfd_target_coff_flavour)
-	einfo (_("%F%P: %pB: all input objects must be COFF "
-		 "for --embedded-relocs\n"));
-
-      datasec = bfd_get_section_by_name (abfd, ".data");
-
-      /* Note that we assume that the reloc_count field has already
-	 been set up.  We could call bfd_get_reloc_upper_bound, but
-	 that returns the size of a memory buffer rather than a reloc
-	 count.  We do not want to call bfd_canonicalize_reloc,
-	 because although it would always work it would force us to
-	 read in the relocs into BFD canonical form, which would waste
-	 a significant amount of time and memory.  */
-      if (datasec != NULL && datasec->reloc_count > 0)
-	{
-	  asection *relsec;
-
-	  relsec = bfd_make_section_with_flags (abfd, ".emreloc",
-						(SEC_ALLOC
-						 | SEC_LOAD
-						 | SEC_HAS_CONTENTS
-						 | SEC_IN_MEMORY));
-	  if (relsec == NULL
-	      || ! bfd_set_section_alignment (abfd, relsec, 2)
-	      || ! bfd_set_section_size (abfd, relsec,
-					 datasec->reloc_count * 12))
-	    einfo (_("%F%P: %pB: can not create .emreloc section: %E\n"));
-	}
-
-      /* Double check that all other data sections are empty, as is
-	 required for embedded PIC code.  */
-      bfd_map_over_sections (abfd, check_sections, datasec);
-    }
-}
-
-/* Check that of the data sections, only the .data section has
-   relocs.  This is called via bfd_map_over_sections.  */
-
-static void
-check_sections (bfd *abfd, asection *sec, void *datasec)
-{
-  if ((bfd_get_section_flags (abfd, sec) & SEC_DATA)
-      && sec != datasec
-      && sec->reloc_count != 0)
-    einfo (_("%X%P: %pB: section %s has relocs; can not use --embedded-relocs\n"),
-	   abfd, bfd_get_section_name (abfd, sec));
-}
-
-/* This function is called after the section sizes and offsets have
-   been set.  If we are generating embedded relocs, it calls a special
-   BFD backend routine to do the work.  */
-
-static void
-gld${EMULATION_NAME}_after_allocation (void)
-{
-  bfd *abfd;
-
-  if (! command_line.embedded_relocs
-      || bfd_link_relocatable (&link_info))
-    return;
-
-  for (abfd = link_info.input_bfds; abfd != NULL; abfd = abfd->link.next)
-    {
-      asection *datasec, *relsec;
-      char *errmsg;
-
-      datasec = bfd_get_section_by_name (abfd, ".data");
-
-      if (datasec == NULL || datasec->reloc_count == 0)
-	continue;
-
-      relsec = bfd_get_section_by_name (abfd, ".emreloc");
-      ASSERT (relsec != NULL);
-
-      if (! bfd_m68k_coff_create_embedded_relocs (abfd, &link_info,
-						   datasec, relsec,
-						   &errmsg))
-	{
-	  if (errmsg == NULL)
-	    einfo (_("%X%P: %pB: can not create runtime reloc information: %E\n"),
-		   abfd);
-	  else
-	    einfo (_("%X%P: %pB: can not create runtime reloc information: %s\n"),
-		   abfd, errmsg);
-	}
-    }
-}
-
-static char *
-gld${EMULATION_NAME}_get_script (int *isfile)
-EOF
-
-if test x"$COMPILE_IN" = xyes
-then
-# Scripts compiled in.
-
-# sed commands to quote an ld script as a C string.
-sc="-f stringify.sed"
-
-fragment <<EOF
-{
-  *isfile = 0;
-
-  if (bfd_link_relocatable (&link_info) && config.build_constructors)
-    return
-EOF
-sed $sc ldscripts/${EMULATION_NAME}.xu                 >> e${EMULATION_NAME}.c
-echo '  ; else if (bfd_link_relocatable (&link_info)) return' >> e${EMULATION_NAME}.c
-sed $sc ldscripts/${EMULATION_NAME}.xr                 >> e${EMULATION_NAME}.c
-echo '  ; else if (!config.text_read_only) return'     >> e${EMULATION_NAME}.c
-sed $sc ldscripts/${EMULATION_NAME}.xbn                >> e${EMULATION_NAME}.c
-echo '  ; else if (!config.magic_demand_paged) return' >> e${EMULATION_NAME}.c
-sed $sc ldscripts/${EMULATION_NAME}.xn                 >> e${EMULATION_NAME}.c
-echo '  ; else return'                                 >> e${EMULATION_NAME}.c
-sed $sc ldscripts/${EMULATION_NAME}.x                  >> e${EMULATION_NAME}.c
-echo '; }'                                             >> e${EMULATION_NAME}.c
-
-else
-# Scripts read from the filesystem.
-
-fragment <<EOF
-{
-  *isfile = 1;
-
-  if (bfd_link_relocatable (&link_info) && config.build_constructors)
-    return "ldscripts/${EMULATION_NAME}.xu";
-  else if (bfd_link_relocatable (&link_info))
-    return "ldscripts/${EMULATION_NAME}.xr";
-  else if (!config.text_read_only)
-    return "ldscripts/${EMULATION_NAME}.xbn";
-  else if (!config.magic_demand_paged)
-    return "ldscripts/${EMULATION_NAME}.xn";
-  else
-    return "ldscripts/${EMULATION_NAME}.x";
-}
-EOF
-
-fi
-
-fragment <<EOF
-
-struct ld_emulation_xfer_struct ld_${EMULATION_NAME}_emulation =
-{
-  gld${EMULATION_NAME}_before_parse,
-  syslib_default,
-  hll_default,
-  after_parse_default,
-  after_check_relocs_default,
-  gld${EMULATION_NAME}_after_open,
-  gld${EMULATION_NAME}_after_allocation,
-  set_output_arch_default,
-  ldemul_default_target,
-  before_allocation_default,
-  gld${EMULATION_NAME}_get_script,
-  "${EMULATION_NAME}",
-  "${OUTPUT_FORMAT}",
-  finish_default,
-  NULL,	/* create output section statements */
-  NULL,	/* open dynamic archive */
-  NULL,	/* place orphan */
-  NULL,	/* set symbols */
-  NULL,	/* parse args */
-  NULL,	/* add_options */
-  NULL,	/* handle_option */
-  NULL,	/* unrecognized file */
-  NULL,	/* list options */
-  NULL,	/* recognized file */
-  NULL,	/* find_potential_libraries */
-  NULL,	/* new_vers_pattern */
-  NULL	/* extra_map_file_text */
-};
-EOF
diff --git a/ld/emultempl/m68kelf.em b/ld/emultempl/m68kelf.em
index ea07002..9c4eabc 100644
--- a/ld/emultempl/m68kelf.em
+++ b/ld/emultempl/m68kelf.em
@@ -79,13 +79,8 @@ m68k_elf_after_open (void)
 	{
 	  asection *datasec;
 
-	  /* As first-order business, make sure that each input BFD is either
-	     COFF or ELF.  We need to call a special BFD backend function to
-	     generate the embedded relocs, and we have such functions only for
-	     COFF and ELF.  */
-	  if (bfd_get_flavour (abfd) != bfd_target_coff_flavour
-	      && bfd_get_flavour (abfd) != bfd_target_elf_flavour)
-	    einfo (_("%F%P: %pB: all input objects must be COFF or ELF "
+	  if (bfd_get_flavour (abfd) != bfd_target_elf_flavour)
+	    einfo (_("%F%P: %pB: all input objects must be ELF "
 		     "for --embedded-relocs\n"));
 
 	  datasec = bfd_get_section_by_name (abfd, ".data");
@@ -167,23 +162,7 @@ m68k_elf_after_allocation (void)
 	  relsec = bfd_get_section_by_name (abfd, ".emreloc");
 	  ASSERT (relsec != NULL);
 
-	  if (bfd_get_flavour (abfd) == bfd_target_coff_flavour)
-	    {
-	      if (! bfd_m68k_coff_create_embedded_relocs (abfd, &link_info,
-							  datasec, relsec,
-							  &errmsg))
-		{
-		  if (errmsg == NULL)
-		    einfo (_("%X%P: %pB: can not create "
-			     "runtime reloc information: %E\n"),
-			   abfd);
-		  else
-		    einfo (_("%X%P: %pB: can not create "
-			     "runtime reloc information: %s\n"),
-			   abfd, errmsg);
-		}
-	    }
-	  else if (bfd_get_flavour (abfd) == bfd_target_elf_flavour)
+	  if (bfd_get_flavour (abfd) == bfd_target_elf_flavour)
 	    {
 	      if (! bfd_m68k_elf32_create_embedded_relocs (abfd, &link_info,
 							   datasec, relsec,