RISC-V: PR27916, Support mapping symbols.

Similar to ARM/AARCH64, we add mapping symbols in the symbol table,
to mark the start addresses of data and instructions.  The $d means
data, and the $x means instruction.  Then the disassembler uses these
symbols to decide whether we should dump data or instruction.

Consider the mapping-04 test case,
$ cat tmp.s
  .text
  .option norelax
  .option norvc
  .fill 2, 4, 0x1001
  .byte 1
  .word 0
  .balign 8
  add a0, a0, a0
  .fill 5, 2, 0x2002
  add a1, a1, a1
  .data
  .word 0x1             # No need to add mapping symbols.
  .word 0x2

$ riscv64-unknown-elf-as tmp.s -o tmp.o
$ riscv64-unknown-elf-objdump -d tmp.o

Disassembly of section .text:

0000000000000000 <.text>:
   0:   00001001         .word   0x00001001  # Marked $d, .fill directive.
   4:   00001001         .word   0x00001001
   8:   00000001         .word   0x00000001  # .byte + part of .word.
   c:   00               .byte   0x00        # remaining .word.
   d:   00               .byte   0x00        # Marked $d, odd byte of alignment.
   e:   0001             nop                 # Marked $x, nops for alignment.
  10:   00a50533         add     a0,a0,a0
  14:   20022002         .word   0x20022002  # Marked $d, .fill directive.
  18:   20022002         .word   0x20022002
  1c:   2002             .short  0x2002
  1e:   00b585b3         add     a1,a1,a1    # Marked $x.
  22:   0001             nop                 # Section tail alignment.
  24:   00000013         nop

* Use $d and $x to mark the distribution of data and instructions.
  Alignments of code are recognized as instructions, since we usually
  fill nops for them.

* If the alignment have odd bytes, then we cannot just fill the nops
  into the spaces.  We always fill an odd byte 0x00 at the start of
  the spaces.  Therefore, add a $d mapping symbol for the odd byte,
  to tell disassembler that it isn't an instruction.  The behavior
  is same as Arm and Aarch64.

The elf/linux toolchain regressions all passed.  Besides, I also
disable the mapping symbols internally, but use the new objudmp, the
regressions passed, too.  Therefore, the new objudmp should dump
the objects corretly, even if they don't have any mapping symbols.

bfd/
	pr 27916
	* cpu-riscv.c (riscv_elf_is_mapping_symbols): Define mapping symbols.
	* cpu-riscv.h: extern riscv_elf_is_mapping_symbols.
	* elfnn-riscv.c (riscv_maybe_function_sym): Do not choose mapping
	symbols as a function name.
	(riscv_elf_is_target_special_symbol): Add mapping symbols.
binutils/
	pr 27916
	* testsuite/binutils-all/readelf.s: Updated.
	* testsuite/binutils-all/readelf.s-64: Likewise.
	* testsuite/binutils-all/readelf.s-64-unused: Likewise.
	* testsuite/binutils-all/readelf.ss: Likewise.
	* testsuite/binutils-all/readelf.ss-64: Likewise.
	* testsuite/binutils-all/readelf.ss-64-unused: Likewise.
gas/
	pr 27916
	* config/tc-riscv.c (make_mapping_symbol): Create a new mapping symbol.
	(riscv_mapping_state): Decide whether to create mapping symbol for
	frag_now.  Only add the mapping symbols to text sections.
	(riscv_add_odd_padding_symbol): Add the mapping symbols for the
	riscv_handle_align, which have odd bytes spaces.
	(riscv_check_mapping_symbols): Remove any excess mapping symbols.
	(md_assemble): Marked as MAP_INSN.
	(riscv_frag_align_code): Marked as MAP_INSN.
	(riscv_init_frag): Add mapping symbols for frag, it usually called
	by frag_var.  Marked as MAP_DATA for rs_align and rs_fill, and
	marked as MAP_INSN for rs_align_code.
	(s_riscv_insn): Marked as MAP_INSN.
	(riscv_adjust_symtab): Call riscv_check_mapping_symbols.
	* config/tc-riscv.h (md_cons_align): Defined to riscv_mapping_state
	with MAP_DATA.
	(TC_SEGMENT_INFO_TYPE): Record mapping state for each segment.
	(TC_FRAG_TYPE): Record the first and last mapping symbols for the
	fragments.  The first mapping symbol must be placed at the start
	of the fragment.
	(TC_FRAG_INIT): Defined to riscv_init_frag.
	* testsuite/gas/riscv/mapping-01.s: New testcase.
	* testsuite/gas/riscv/mapping-01a.d: Likewise.
	* testsuite/gas/riscv/mapping-01b.d: Likewise.
	* testsuite/gas/riscv/mapping-02.s: Likewise.
	* testsuite/gas/riscv/mapping-02a.d: Likewise.
	* testsuite/gas/riscv/mapping-02b.d: Likewise.
	* testsuite/gas/riscv/mapping-03.s: Likewise.
	* testsuite/gas/riscv/mapping-03a.d: Likewise.
	* testsuite/gas/riscv/mapping-03b.d: Likewise.
	* testsuite/gas/riscv/mapping-04.s: Likewise.
	* testsuite/gas/riscv/mapping-04a.d: Likewise.
	* testsuite/gas/riscv/mapping-04b.d: Likewise.
	* testsuite/gas/riscv/mapping-norelax-04a.d: Likewise.
	* testsuite/gas/riscv/mapping-norelax-04b.d: Likewise.
	* testsuite/gas/riscv/no-relax-align.d: Updated.
	* testsuite/gas/riscv/no-relax-align-2.d: Likewise.
include/
	pr 27916
	* opcode/riscv.h (enum riscv_seg_mstate): Added.

opcodes/
	pr 27916
	* riscv-dis.c (last_map_symbol, last_stop_offset, last_map_state):
	Added to dump sections with mapping symbols.
	(riscv_get_map_state): Get the mapping state from the symbol.
	(riscv_search_mapping_symbol): Check the sorted symbol table, and
	then find the suitable mapping symbol.
	(riscv_data_length): Decide which data size we should print.
	(riscv_disassemble_data): Dump the data contents.
	(print_insn_riscv): Handle the mapping symbols.
	(riscv_symbol_is_valid): Marked mapping symbols as invalid.

1 files changed, 7 insertions, 0 deletions

diff --git a/include/opcode/riscv.h b/include/opcode/riscv.h
index fdf3df4..a8f4741 100644
--- a/include/opcode/riscv.h
+++ b/include/opcode/riscv.h
@@ -425,6 +425,13 @@ enum
   M_NUM_MACROS
 };
 
+/* The mapping symbol states.  */
+enum riscv_seg_mstate
+{
+  MAP_NONE = 0,		/* Must be zero, for seginfo in new sections.  */
+  MAP_DATA,		/* Data.  */
+  MAP_INSN,		/* Instructions.  */
+};
 
 extern const char * const riscv_gpr_names_numeric[NGPR];
 extern const char * const riscv_gpr_names_abi[NGPR];