* layout.cc (Layout::set_segment_offsets): Don't try to realign data

	segment that has been aligned for relro.
	* output.cc (Output_segment::set_section_addresses): Change signature;
	adjust all callers.  Account for alignment when totalling
	size of relro sections.
	* output.h (Output_segment::set_section_addresses): Change signature.
	* testsuite/Makefile.am (relro_test.sh, relro_test.stdout): New
	targets.
	* testsuite/Makefile.in: Regenerate.
	* testsuite/relro_test.cc: Add alignment attributes to test proper
	alignment of relro sections when padding is necessary.
	* testsuite/relro_test.sh: New script.

7 files changed, 129 insertions, 15 deletions

diff --git a/gold/layout.cc b/gold/layout.cc
index 2f56d27..3df7d3d 100644
--- a/gold/layout.cc
+++ b/gold/layout.cc
@@ -2656,17 +2656,21 @@ Layout::set_segment_offsets(const Target* target, Output_segment* load_seg,
 	    }
 
 	  unsigned int shndx_hold = *pshndx;
+	  bool has_relro = false;
 	  uint64_t new_addr = (*p)->set_section_addresses(this, false, addr,
-							  increase_relro,
+							  &increase_relro,
+							  &has_relro,
                                                           &off, pshndx);
 
 	  // Now that we know the size of this segment, we may be able
 	  // to save a page in memory, at the cost of wasting some
 	  // file space, by instead aligning to the start of a new
 	  // page.  Here we use the real machine page size rather than
-	  // the ABI mandated page size.
+	  // the ABI mandated page size.  If the segment has been
+	  // aligned so that the relro data ends at a page boundary,
+	  // we do not try to realign it.
 
-	  if (!are_addresses_set && aligned_addr != addr)
+	  if (!are_addresses_set && !has_relro && aligned_addr != addr)
 	    {
 	      uint64_t first_off = (common_pagesize
 				    - (aligned_addr
@@ -2684,7 +2688,8 @@ Layout::set_segment_offsets(const Target* target, Output_segment* load_seg,
 		  off = orig_off + ((addr - orig_addr) & (abi_pagesize - 1));
 		  off = align_file_offset(off, addr, abi_pagesize);
 		  new_addr = (*p)->set_section_addresses(this, true, addr,
-							 increase_relro,
+							 &increase_relro,
+							 &has_relro,
                                                          &off, pshndx);
 		}
 	    }
diff --git a/gold/output.cc b/gold/output.cc
index ffc5d69..4e7ad08 100644
--- a/gold/output.cc
+++ b/gold/output.cc
@@ -3656,18 +3656,26 @@ Output_segment::has_dynamic_reloc_list(const Output_data_list* pdl) const
 // Set the section addresses for an Output_segment.  If RESET is true,
 // reset the addresses first.  ADDR is the address and *POFF is the
 // file offset.  Set the section indexes starting with *PSHNDX.
+// *PINCREASE_RELRO is the size of the portion of the first non-relro
+// section that should be included in the PT_GNU_RELRO segment; if
+// there is alignment padding between the last relro section and the
+// next section, we add that padding to that size and return the
+// updated value.  If this segment has relro sections, and has been
+// aligned for that purpose, set *HAS_RELRO to TRUE.
 // Return the address of the immediately following segment.  Update
-// *POFF and *PSHNDX.
+// *PINCREASE_RELRO, *HAS_RELRO, *POFF, and *PSHNDX.
 
 uint64_t
 Output_segment::set_section_addresses(const Layout* layout, bool reset,
                                       uint64_t addr,
-				      unsigned int increase_relro,
+				      unsigned int* pincrease_relro,
+				      bool* has_relro,
 				      off_t* poff,
 				      unsigned int* pshndx)
 {
   gold_assert(this->type_ == elfcpp::PT_LOAD);
 
+  uint64_t last_relro_pad = 0;
   off_t orig_off = *poff;
 
   // If we have relro sections, we need to pad forward now so that the
@@ -3678,6 +3686,7 @@ Output_segment::set_section_addresses(const Layout* layout, bool reset,
     {
       uint64_t relro_size = 0;
       off_t off = *poff;
+      uint64_t max_align = 0;
       for (int i = 0; i < static_cast<int>(ORDER_MAX); ++i)
 	{
 	  Output_data_list* pdl = &this->output_lists_[i];
@@ -3689,6 +3698,10 @@ Output_segment::set_section_addresses(const Layout* layout, bool reset,
 	      Output_section* pos = (*p)->output_section();
 	      if (!pos->is_relro())
 		break;
+	      uint64_t align = (*p)->addralign();
+	      if (align > max_align)
+		max_align = align;
+	      relro_size = align_address(relro_size, align);
 	      if ((*p)->is_address_valid())
 		relro_size += (*p)->data_size();
 	      else
@@ -3703,12 +3716,20 @@ Output_segment::set_section_addresses(const Layout* layout, bool reset,
 	  if (p != pdl->end())
 	    break;
 	}
-      relro_size += increase_relro;
+      relro_size += *pincrease_relro;
+      // Pad the total relro size to a multiple of the maximum
+      // section alignment seen.
+      uint64_t aligned_size = align_address(relro_size, max_align);
+      // Note the amount of padding added after the last relro section.
+      last_relro_pad = aligned_size - relro_size;
+      // Adjust *PINCREASE_RELRO to include the padding.
+      *pincrease_relro += last_relro_pad;
+      *has_relro = true;
 
       uint64_t page_align = parameters->target().common_pagesize();
 
       // Align to offset N such that (N + RELRO_SIZE) % PAGE_ALIGN == 0.
-      uint64_t desired_align = page_align - (relro_size % page_align);
+      uint64_t desired_align = page_align - (aligned_size % page_align);
       if (desired_align < *poff % page_align)
 	*poff += page_align - *poff % page_align;
       *poff += desired_align - *poff % page_align;
@@ -3739,6 +3760,11 @@ Output_segment::set_section_addresses(const Layout* layout, bool reset,
       addr = this->set_section_list_addresses(layout, reset,
 					      &this->output_lists_[i],
 					      addr, poff, pshndx, &in_tls);
+      if (i == static_cast<int>(ORDER_RELRO_LAST))
+	{
+	  *poff += last_relro_pad;
+	  addr += last_relro_pad;
+	}
       if (i < static_cast<int>(ORDER_SMALL_BSS))
 	{
 	  this->filesz_ = *poff - orig_off;
diff --git a/gold/output.h b/gold/output.h
index 40d8d3f..52c69e9 100644
--- a/gold/output.h
+++ b/gold/output.h
@@ -3908,8 +3908,8 @@ class Output_segment
   // *PSHNDX.  This should only be called for a PT_LOAD segment.
   uint64_t
   set_section_addresses(const Layout*, bool reset, uint64_t addr,
-			unsigned int increase_relro, off_t* poff,
-			unsigned int* pshndx);
+			unsigned int* pincrease_relro, bool* has_relro,
+			off_t* poff, unsigned int* pshndx);
 
   // Set the minimum alignment of this segment.  This may be adjusted
   // upward based on the section alignments.
diff --git a/gold/testsuite/Makefile.am b/gold/testsuite/Makefile.am
index c4e6c03..fb4d4e3 100644
--- a/gold/testsuite/Makefile.am
+++ b/gold/testsuite/Makefile.am
@@ -1076,6 +1076,8 @@ protected_3.err: protected_4_pic.o gcctestdir/ld
 	fi
 
 check_PROGRAMS += relro_test
+check_SCRIPTS += relro_test.sh
+check_DATA += relro_test.stdout
 relro_test_SOURCES = relro_test_main.cc
 relro_test_DEPENDENCIES = gcctestdir/ld relro_test.so
 relro_test_LDFLAGS = -Bgcctestdir/ -Wl,-R,.
@@ -1084,6 +1086,8 @@ relro_test.so: gcctestdir/ld relro_test_pic.o
 	$(CXXLINK) -Bgcctestdir/ -shared -Wl,-z,relro relro_test_pic.o
 relro_test_pic.o: relro_test.cc
 	$(CXXCOMPILE) -c -fpic -o $@ $<
+relro_test.stdout: relro_test.so
+	$(TEST_READELF) -SlW relro_test.so > relro_test.stdout
 
 check_PROGRAMS += relro_strip_test
 relro_strip_test_SOURCES = relro_test_main.cc
diff --git a/gold/testsuite/Makefile.in b/gold/testsuite/Makefile.in
index d514893..fe62867 100644
--- a/gold/testsuite/Makefile.in
+++ b/gold/testsuite/Makefile.in
@@ -75,6 +75,7 @@ check_PROGRAMS = $(am__EXEEXT_1) $(am__EXEEXT_2) $(am__EXEEXT_3) \
 @GCC_TRUE@@NATIVE_LINKER_TRUE@	ver_test_1.sh ver_test_2.sh \
 @GCC_TRUE@@NATIVE_LINKER_TRUE@	ver_test_4.sh ver_test_5.sh \
 @GCC_TRUE@@NATIVE_LINKER_TRUE@	ver_test_7.sh ver_test_10.sh \
+@GCC_TRUE@@NATIVE_LINKER_TRUE@	relro_test.sh \
 @GCC_TRUE@@NATIVE_LINKER_TRUE@	ver_matching_test.sh \
 @GCC_TRUE@@NATIVE_LINKER_TRUE@	script_test_3.sh \
 @GCC_TRUE@@NATIVE_LINKER_TRUE@	script_test_4.sh \
@@ -112,6 +113,7 @@ check_PROGRAMS = $(am__EXEEXT_1) $(am__EXEEXT_2) $(am__EXEEXT_3) \
 @GCC_TRUE@@NATIVE_LINKER_TRUE@	ver_test_2.syms ver_test_4.syms \
 @GCC_TRUE@@NATIVE_LINKER_TRUE@	ver_test_5.syms ver_test_7.syms \
 @GCC_TRUE@@NATIVE_LINKER_TRUE@	ver_test_10.syms protected_3.err \
+@GCC_TRUE@@NATIVE_LINKER_TRUE@	relro_test.stdout \
 @GCC_TRUE@@NATIVE_LINKER_TRUE@	ver_matching_test.stdout \
 @GCC_TRUE@@NATIVE_LINKER_TRUE@	script_test_3.stdout \
 @GCC_TRUE@@NATIVE_LINKER_TRUE@	script_test_4.stdout \
@@ -3301,6 +3303,8 @@ ver_test_7.sh.log: ver_test_7.sh
 	@p='ver_test_7.sh'; $(am__check_pre) $(LOG_COMPILE) "$$tst" $(am__check_post)
 ver_test_10.sh.log: ver_test_10.sh
 	@p='ver_test_10.sh'; $(am__check_pre) $(LOG_COMPILE) "$$tst" $(am__check_post)
+relro_test.sh.log: relro_test.sh
+	@p='relro_test.sh'; $(am__check_pre) $(LOG_COMPILE) "$$tst" $(am__check_post)
 ver_matching_test.sh.log: ver_matching_test.sh
 	@p='ver_matching_test.sh'; $(am__check_pre) $(LOG_COMPILE) "$$tst" $(am__check_post)
 script_test_3.sh.log: script_test_3.sh
@@ -4196,6 +4200,8 @@ uninstall-am:
 @GCC_TRUE@@NATIVE_LINKER_TRUE@	$(CXXLINK) -Bgcctestdir/ -shared -Wl,-z,relro relro_test_pic.o
 @GCC_TRUE@@NATIVE_LINKER_TRUE@relro_test_pic.o: relro_test.cc
 @GCC_TRUE@@NATIVE_LINKER_TRUE@	$(CXXCOMPILE) -c -fpic -o $@ $<
+@GCC_TRUE@@NATIVE_LINKER_TRUE@relro_test.stdout: relro_test.so
+@GCC_TRUE@@NATIVE_LINKER_TRUE@	$(TEST_READELF) -SlW relro_test.so > relro_test.stdout
 @GCC_TRUE@@NATIVE_LINKER_TRUE@relro_strip_test.so: relro_test.so
 @GCC_TRUE@@NATIVE_LINKER_TRUE@	$(TEST_STRIP) -o $@ $<
 @GCC_TRUE@@NATIVE_LINKER_TRUE@relro_script_test.so: gcctestdir/ld relro_script_test.t relro_test_pic.o
@@ -4560,10 +4566,10 @@ uninstall-am:
 @GCC_TRUE@@NATIVE_LINKER_TRUE@	$(TEST_READELF) -lWS  $< > $@
 @NATIVE_OR_CROSS_LINKER_TRUE@script_test_10.o: script_test_10.s
 @NATIVE_OR_CROSS_LINKER_TRUE@	$(TEST_AS) -o $@ $<
-@NATIVE_OR_CROSS_LINKER_TRUE@script_test_10: $(srcdir)/script_test_10.t script_test_10.o
-@NATIVE_OR_CROSS_LINKER_TRUE@	../ld-new -o $@ script_test_10.o -T $(srcdir)/script_test_10.t
+@NATIVE_OR_CROSS_LINKER_TRUE@script_test_10: $(srcdir)/script_test_10.t script_test_10.o gcctestdir/ld
+@NATIVE_OR_CROSS_LINKER_TRUE@	gcctestdir/ld -o $@ script_test_10.o -T $(srcdir)/script_test_10.t
 @NATIVE_OR_CROSS_LINKER_TRUE@script_test_10.stdout: script_test_10
-@NATIVE_OR_CROSS_LINKER_TRUE@	$(TEST_READELF) -SW script_test_10 > script_test_10.stdout
+@NATIVE_OR_CROSS_LINKER_TRUE@	$(TEST_READELF) -SW script_test_10 > $@
 @DEFAULT_TARGET_I386_TRUE@@NATIVE_OR_CROSS_LINKER_TRUE@split_i386_1.o: split_i386_1.s
 @DEFAULT_TARGET_I386_TRUE@@NATIVE_OR_CROSS_LINKER_TRUE@	$(TEST_AS) -o $@ $<
 @DEFAULT_TARGET_I386_TRUE@@NATIVE_OR_CROSS_LINKER_TRUE@split_i386_2.o: split_i386_2.s
diff --git a/gold/testsuite/relro_test.cc b/gold/testsuite/relro_test.cc
index bc6c77b..d741022 100644
--- a/gold/testsuite/relro_test.cc
+++ b/gold/testsuite/relro_test.cc
@@ -40,10 +40,10 @@ int i1 = 1;
 static int i2 = 2;
 
 // P1 is a global relro variable.
-int* const p1 = &i1;
+int* const p1 __attribute__ ((aligned(64))) = &i1;
 
 // P2 is a local relro variable.
-int* const p2 = &i2;
+int* const p2 __attribute__ ((aligned(64))) = &i2;
 
 // Test symbol addresses.
 
diff --git a/gold/testsuite/relro_test.sh b/gold/testsuite/relro_test.sh
new file mode 100755
index 0000000..2995302
--- /dev/null
+++ b/gold/testsuite/relro_test.sh
@@ -0,0 +1,73 @@
+#!/bin/sh
+
+# relro_test.sh -- test -z relro
+
+# Copyright 2010 Free Software Foundation, Inc.
+# Written by Cary Coutant <ccoutant@google.com>.
+
+# This file is part of gold.
+
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 3 of the License, or
+# (at your option) any later version.
+
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 51 Franklin Street - Fifth Floor, Boston,
+# MA 02110-1301, USA.
+
+# This test checks that the PT_GNU_RELRO segment is properly
+# aligned and is coincident with the beginning of the data segment.
+
+
+# Cleans a hexadecimal number for input to dc.
+clean_hex()
+{
+  echo "$1" | sed -e 's/0x//' -e 'y/abcdef/ABCDEF/'
+}
+
+check()
+{
+  # Get the address and length of the PT_GNU_RELRO segment.
+  RELRO_START=`grep GNU_RELRO "$1" | awk '{ print $3; }'`
+  RELRO_LEN=`grep GNU_RELRO "$1" | awk '{ print $6; }'`
+
+  if test -z "$RELRO_START"
+  then
+    echo "Did not find a PT_GNU_RELRO segment."
+    exit 1
+  fi
+
+  # Get the address and alignment of the PT_LOAD segment whose address
+  # matches the PT_GNU_RELRO segment.
+  LOAD_ALIGN=`grep LOAD "$1" | awk -v A=$RELRO_START '$3 == A { print $NF; }'`
+  LOAD_LEN=`grep LOAD "$1" | awk -v A=$RELRO_START '$3 == A { print $6; }'`
+
+  if test -z "$LOAD_LEN"
+  then
+    echo "Did not find a PT_LOAD segment matching the PT_GNU_RELRO segment."
+    exit 1
+  fi
+
+  # Compute the address of the end of the PT_GNU_RELRO segment,
+  # modulo the alignment of the PT_LOAD segment.
+  RELRO_START=`clean_hex "$RELRO_START"`
+  RELRO_LEN=`clean_hex "$RELRO_LEN"`
+  LOAD_ALIGN=`clean_hex "$LOAD_ALIGN"`
+  RELRO_END=`echo "16o 16i $RELRO_START $RELRO_LEN + p" | dc`
+  REM=`echo "16i $RELRO_END $LOAD_ALIGN % p" | dc`
+
+  if test "$REM" -ne 0
+  then
+    echo "PT_GNU_RELRO segment does not end at page boundary."
+    exit 1
+  fi
+}
+
+check relro_test.stdout