Move gnulib to top level

This patch moves the gdb/gnulib subdirectory to the top level.

It adjusts the top-level build system to build gnulib when necessary,
and changes gdb to use this.  However, gdbserver still builds its own
copy of gnulib, just from the new source location.

A small hack was needed to ensure that gnulib is only built when gdb
is enabled.  The Makefile only provides an ordering -- the directory
must be mentioned in configdirs to actually be compiled at all.

Most of the patch is just a "git mv" of gnulib, though a few minor
path adjustments were needed in some files there.

Tested by the buildbot.

ChangeLog
2019-06-14  Tom Tromey  <tom@tromey.com>

	* MAINTAINERS: Add gnulib.
	* gnulib: New directory, move from gdb/gnulib.
	* configure.ac (host_libs): Add gnulib.
	* configure: Rebuild.
	* Makefile.def (host_modules, dependencies): Add gnulib.
	* Makefile.in: Rebuild.

gdb/ChangeLog
2019-06-14  Tom Tromey  <tom@tromey.com>

	* gnulib: Move directory to top-level.
	* configure.ac: Don't configure gnulib.
	* configure: Rebuild.
	* common/common-defs.h: Use new path to gnulib.
	* Makefile.in (GNULIB_BUILDDIR): Now ../gnulib.
	(GNULIB_H): Remove.
	(INCGNU): Look in new gnulib location.
	(HFILES_NO_SRCDIR): Remove gnulib files.
	(SUBDIR, REQUIRED_SUBDIRS): Remove gnulib.
	(generated_files): Remove GNULIB_H.
	($(LIBGNU), all-lib): Remove targets.
	(distclean): Don't mention GNULIB_BUILDDIR.
	($(GNULIB_BUILDDIR)/Makefile): Remove target.

gdb/gdbserver/ChangeLog
2019-06-14  Tom Tromey  <tom@tromey.com>

	* configure.ac: Use new path to gnulib.
	* configure: Rebuild.
	* Makefile.in (INCGNU, $(GNULIB_BUILDDIR)/Makefile): Use new path
	to gnulib.

gnulib/ChangeLog
2019-06-14  Tom Tromey  <tom@tromey.com>

	* update-gnulib.sh: Adjust paths.
	* Makefile.in: Adjust paths.
	* configure.ac: Adjust paths.  Use ACX_LARGEFILE.
	* configure: Rebuild.

1 files changed, 161 insertions, 0 deletions

diff --git a/gnulib/import/memrchr.c b/gnulib/import/memrchr.c
new file mode 100644
index 0000000..e6212e5
--- /dev/null
+++ b/gnulib/import/memrchr.c
@@ -0,0 +1,161 @@
+/* memrchr -- find the last occurrence of a byte in a memory block
+
+   Copyright (C) 1991, 1993, 1996-1997, 1999-2000, 2003-2016 Free Software
+   Foundation, Inc.
+
+   Based on strlen implementation by Torbjorn Granlund (tege@sics.se),
+   with help from Dan Sahlin (dan@sics.se) and
+   commentary by Jim Blandy (jimb@ai.mit.edu);
+   adaptation to memchr suggested by Dick Karpinski (dick@cca.ucsf.edu),
+   and implemented by Roland McGrath (roland@ai.mit.edu).
+
+   This program is free software: you can redistribute it and/or modify
+   it under the terms of the GNU General Public License as published by
+   the Free Software Foundation; either version 3 of the License, or
+   (at your option) any later version.
+
+   This program is distributed in the hope that it will be useful,
+   but WITHOUT ANY WARRANTY; without even the implied warranty of
+   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+   GNU General Public License for more details.
+
+   You should have received a copy of the GNU General Public License
+   along with this program.  If not, see <http://www.gnu.org/licenses/>.  */
+
+#if defined _LIBC
+# include <memcopy.h>
+#else
+# include <config.h>
+# define reg_char char
+#endif
+
+#include <string.h>
+#include <limits.h>
+
+#undef __memrchr
+#ifdef _LIBC
+# undef memrchr
+#endif
+
+#ifndef weak_alias
+# define __memrchr memrchr
+#endif
+
+/* Search no more than N bytes of S for C.  */
+void *
+__memrchr (void const *s, int c_in, size_t n)
+{
+  /* On 32-bit hardware, choosing longword to be a 32-bit unsigned
+     long instead of a 64-bit uintmax_t tends to give better
+     performance.  On 64-bit hardware, unsigned long is generally 64
+     bits already.  Change this typedef to experiment with
+     performance.  */
+  typedef unsigned long int longword;
+
+  const unsigned char *char_ptr;
+  const longword *longword_ptr;
+  longword repeated_one;
+  longword repeated_c;
+  unsigned reg_char c;
+
+  c = (unsigned char) c_in;
+
+  /* Handle the last few bytes by reading one byte at a time.
+     Do this until CHAR_PTR is aligned on a longword boundary.  */
+  for (char_ptr = (const unsigned char *) s + n;
+       n > 0 && (size_t) char_ptr % sizeof (longword) != 0;
+       --n)
+    if (*--char_ptr == c)
+      return (void *) char_ptr;
+
+  longword_ptr = (const longword *) char_ptr;
+
+  /* All these elucidatory comments refer to 4-byte longwords,
+     but the theory applies equally well to any size longwords.  */
+
+  /* Compute auxiliary longword values:
+     repeated_one is a value which has a 1 in every byte.
+     repeated_c has c in every byte.  */
+  repeated_one = 0x01010101;
+  repeated_c = c | (c << 8);
+  repeated_c |= repeated_c << 16;
+  if (0xffffffffU < (longword) -1)
+    {
+      repeated_one |= repeated_one << 31 << 1;
+      repeated_c |= repeated_c << 31 << 1;
+      if (8 < sizeof (longword))
+        {
+          size_t i;
+
+          for (i = 64; i < sizeof (longword) * 8; i *= 2)
+            {
+              repeated_one |= repeated_one << i;
+              repeated_c |= repeated_c << i;
+            }
+        }
+    }
+
+  /* Instead of the traditional loop which tests each byte, we will test a
+     longword at a time.  The tricky part is testing if *any of the four*
+     bytes in the longword in question are equal to c.  We first use an xor
+     with repeated_c.  This reduces the task to testing whether *any of the
+     four* bytes in longword1 is zero.
+
+     We compute tmp =
+       ((longword1 - repeated_one) & ~longword1) & (repeated_one << 7).
+     That is, we perform the following operations:
+       1. Subtract repeated_one.
+       2. & ~longword1.
+       3. & a mask consisting of 0x80 in every byte.
+     Consider what happens in each byte:
+       - If a byte of longword1 is zero, step 1 and 2 transform it into 0xff,
+         and step 3 transforms it into 0x80.  A carry can also be propagated
+         to more significant bytes.
+       - If a byte of longword1 is nonzero, let its lowest 1 bit be at
+         position k (0 <= k <= 7); so the lowest k bits are 0.  After step 1,
+         the byte ends in a single bit of value 0 and k bits of value 1.
+         After step 2, the result is just k bits of value 1: 2^k - 1.  After
+         step 3, the result is 0.  And no carry is produced.
+     So, if longword1 has only non-zero bytes, tmp is zero.
+     Whereas if longword1 has a zero byte, call j the position of the least
+     significant zero byte.  Then the result has a zero at positions 0, ...,
+     j-1 and a 0x80 at position j.  We cannot predict the result at the more
+     significant bytes (positions j+1..3), but it does not matter since we
+     already have a non-zero bit at position 8*j+7.
+
+     So, the test whether any byte in longword1 is zero is equivalent to
+     testing whether tmp is nonzero.  */
+
+  while (n >= sizeof (longword))
+    {
+      longword longword1 = *--longword_ptr ^ repeated_c;
+
+      if ((((longword1 - repeated_one) & ~longword1)
+           & (repeated_one << 7)) != 0)
+        {
+          longword_ptr++;
+          break;
+        }
+      n -= sizeof (longword);
+    }
+
+  char_ptr = (const unsigned char *) longword_ptr;
+
+  /* At this point, we know that either n < sizeof (longword), or one of the
+     sizeof (longword) bytes starting at char_ptr is == c.  On little-endian
+     machines, we could determine the first such byte without any further
+     memory accesses, just by looking at the tmp result from the last loop
+     iteration.  But this does not work on big-endian machines.  Choose code
+     that works in both cases.  */
+
+  while (n-- > 0)
+    {
+      if (*--char_ptr == c)
+        return (void *) char_ptr;
+    }
+
+  return NULL;
+}
+#ifdef weak_alias
+weak_alias (__memrchr, memrchr)
+#endif