Move gnulib to top level

This patch moves the gdb/gnulib subdirectory to the top level.

It adjusts the top-level build system to build gnulib when necessary,
and changes gdb to use this.  However, gdbserver still builds its own
copy of gnulib, just from the new source location.

A small hack was needed to ensure that gnulib is only built when gdb
is enabled.  The Makefile only provides an ordering -- the directory
must be mentioned in configdirs to actually be compiled at all.

Most of the patch is just a "git mv" of gnulib, though a few minor
path adjustments were needed in some files there.

Tested by the buildbot.

ChangeLog
2019-06-14  Tom Tromey  <tom@tromey.com>

	* MAINTAINERS: Add gnulib.
	* gnulib: New directory, move from gdb/gnulib.
	* configure.ac (host_libs): Add gnulib.
	* configure: Rebuild.
	* Makefile.def (host_modules, dependencies): Add gnulib.
	* Makefile.in: Rebuild.

gdb/ChangeLog
2019-06-14  Tom Tromey  <tom@tromey.com>

	* gnulib: Move directory to top-level.
	* configure.ac: Don't configure gnulib.
	* configure: Rebuild.
	* common/common-defs.h: Use new path to gnulib.
	* Makefile.in (GNULIB_BUILDDIR): Now ../gnulib.
	(GNULIB_H): Remove.
	(INCGNU): Look in new gnulib location.
	(HFILES_NO_SRCDIR): Remove gnulib files.
	(SUBDIR, REQUIRED_SUBDIRS): Remove gnulib.
	(generated_files): Remove GNULIB_H.
	($(LIBGNU), all-lib): Remove targets.
	(distclean): Don't mention GNULIB_BUILDDIR.
	($(GNULIB_BUILDDIR)/Makefile): Remove target.

gdb/gdbserver/ChangeLog
2019-06-14  Tom Tromey  <tom@tromey.com>

	* configure.ac: Use new path to gnulib.
	* configure: Rebuild.
	* Makefile.in (INCGNU, $(GNULIB_BUILDDIR)/Makefile): Use new path
	to gnulib.

gnulib/ChangeLog
2019-06-14  Tom Tromey  <tom@tromey.com>

	* update-gnulib.sh: Adjust paths.
	* Makefile.in: Adjust paths.
	* configure.ac: Adjust paths.  Use ACX_LARGEFILE.
	* configure: Rebuild.

1 files changed, 478 insertions, 0 deletions

diff --git a/gnulib/import/alloca.c b/gnulib/import/alloca.c
new file mode 100644
index 0000000..ee0f018
--- /dev/null
+++ b/gnulib/import/alloca.c
@@ -0,0 +1,478 @@
+/* alloca.c -- allocate automatically reclaimed memory
+   (Mostly) portable public-domain implementation -- D A Gwyn
+
+   This implementation of the PWB library alloca function,
+   which is used to allocate space off the run-time stack so
+   that it is automatically reclaimed upon procedure exit,
+   was inspired by discussions with J. Q. Johnson of Cornell.
+   J.Otto Tennant <jot@cray.com> contributed the Cray support.
+
+   There are some preprocessor constants that can
+   be defined when compiling for your specific system, for
+   improved efficiency; however, the defaults should be okay.
+
+   The general concept of this implementation is to keep
+   track of all alloca-allocated blocks, and reclaim any
+   that are found to be deeper in the stack than the current
+   invocation.  This heuristic does not reclaim storage as
+   soon as it becomes invalid, but it will do so eventually.
+
+   As a special case, alloca(0) reclaims storage without
+   allocating any.  It is a good idea to use alloca(0) in
+   your main control loop, etc. to force garbage collection.  */
+
+#include <config.h>
+
+#include <alloca.h>
+
+#include <string.h>
+#include <stdlib.h>
+
+#ifdef emacs
+# include "lisp.h"
+# include "blockinput.h"
+# ifdef EMACS_FREE
+#  undef free
+#  define free EMACS_FREE
+# endif
+#else
+# define memory_full() abort ()
+#endif
+
+/* If compiling with GCC 2, this file's not needed.  */
+#if !defined (__GNUC__) || __GNUC__ < 2
+
+/* If someone has defined alloca as a macro,
+   there must be some other way alloca is supposed to work.  */
+# ifndef alloca
+
+#  ifdef emacs
+#   ifdef static
+/* actually, only want this if static is defined as ""
+   -- this is for usg, in which emacs must undefine static
+   in order to make unexec workable
+   */
+#    ifndef STACK_DIRECTION
+you
+lose
+-- must know STACK_DIRECTION at compile-time
+/* Using #error here is not wise since this file should work for
+   old and obscure compilers.  */
+#    endif /* STACK_DIRECTION undefined */
+#   endif /* static */
+#  endif /* emacs */
+
+/* If your stack is a linked list of frames, you have to
+   provide an "address metric" ADDRESS_FUNCTION macro.  */
+
+#  if defined (CRAY) && defined (CRAY_STACKSEG_END)
+long i00afunc ();
+#   define ADDRESS_FUNCTION(arg) (char *) i00afunc (&(arg))
+#  else
+#   define ADDRESS_FUNCTION(arg) &(arg)
+#  endif
+
+/* Define STACK_DIRECTION if you know the direction of stack
+   growth for your system; otherwise it will be automatically
+   deduced at run-time.
+
+   STACK_DIRECTION > 0 => grows toward higher addresses
+   STACK_DIRECTION < 0 => grows toward lower addresses
+   STACK_DIRECTION = 0 => direction of growth unknown  */
+
+#  ifndef STACK_DIRECTION
+#   define STACK_DIRECTION      0       /* Direction unknown.  */
+#  endif
+
+#  if STACK_DIRECTION != 0
+
+#   define STACK_DIR    STACK_DIRECTION /* Known at compile-time.  */
+
+#  else /* STACK_DIRECTION == 0; need run-time code.  */
+
+static int stack_dir;           /* 1 or -1 once known.  */
+#   define STACK_DIR    stack_dir
+
+static int
+find_stack_direction (int *addr, int depth)
+{
+  int dir, dummy = 0;
+  if (! addr)
+    addr = &dummy;
+  *addr = addr < &dummy ? 1 : addr == &dummy ? 0 : -1;
+  dir = depth ? find_stack_direction (addr, depth - 1) : 0;
+  return dir + dummy;
+}
+
+#  endif /* STACK_DIRECTION == 0 */
+
+/* An "alloca header" is used to:
+   (a) chain together all alloca'ed blocks;
+   (b) keep track of stack depth.
+
+   It is very important that sizeof(header) agree with malloc
+   alignment chunk size.  The following default should work okay.  */
+
+#  ifndef       ALIGN_SIZE
+#   define ALIGN_SIZE   sizeof(double)
+#  endif
+
+typedef union hdr
+{
+  char align[ALIGN_SIZE];       /* To force sizeof(header).  */
+  struct
+    {
+      union hdr *next;          /* For chaining headers.  */
+      char *deep;               /* For stack depth measure.  */
+    } h;
+} header;
+
+static header *last_alloca_header = NULL;       /* -> last alloca header.  */
+
+/* Return a pointer to at least SIZE bytes of storage,
+   which will be automatically reclaimed upon exit from
+   the procedure that called alloca.  Originally, this space
+   was supposed to be taken from the current stack frame of the
+   caller, but that method cannot be made to work for some
+   implementations of C, for example under Gould's UTX/32.  */
+
+void *
+alloca (size_t size)
+{
+  auto char probe;              /* Probes stack depth: */
+  register char *depth = ADDRESS_FUNCTION (probe);
+
+#  if STACK_DIRECTION == 0
+  if (STACK_DIR == 0)           /* Unknown growth direction.  */
+    STACK_DIR = find_stack_direction (NULL, (size & 1) + 20);
+#  endif
+
+  /* Reclaim garbage, defined as all alloca'd storage that
+     was allocated from deeper in the stack than currently.  */
+
+  {
+    register header *hp;        /* Traverses linked list.  */
+
+#  ifdef emacs
+    BLOCK_INPUT;
+#  endif
+
+    for (hp = last_alloca_header; hp != NULL;)
+      if ((STACK_DIR > 0 && hp->h.deep > depth)
+          || (STACK_DIR < 0 && hp->h.deep < depth))
+        {
+          register header *np = hp->h.next;
+
+          free (hp);            /* Collect garbage.  */
+
+          hp = np;              /* -> next header.  */
+        }
+      else
+        break;                  /* Rest are not deeper.  */
+
+    last_alloca_header = hp;    /* -> last valid storage.  */
+
+#  ifdef emacs
+    UNBLOCK_INPUT;
+#  endif
+  }
+
+  if (size == 0)
+    return NULL;                /* No allocation required.  */
+
+  /* Allocate combined header + user data storage.  */
+
+  {
+    /* Address of header.  */
+    register header *new;
+
+    size_t combined_size = sizeof (header) + size;
+    if (combined_size < sizeof (header))
+      memory_full ();
+
+    new = malloc (combined_size);
+
+    if (! new)
+      memory_full ();
+
+    new->h.next = last_alloca_header;
+    new->h.deep = depth;
+
+    last_alloca_header = new;
+
+    /* User storage begins just after header.  */
+
+    return (void *) (new + 1);
+  }
+}
+
+#  if defined (CRAY) && defined (CRAY_STACKSEG_END)
+
+#   ifdef DEBUG_I00AFUNC
+#    include <stdio.h>
+#   endif
+
+#   ifndef CRAY_STACK
+#    define CRAY_STACK
+#    ifndef CRAY2
+/* Stack structures for CRAY-1, CRAY X-MP, and CRAY Y-MP */
+struct stack_control_header
+  {
+    long shgrow:32;             /* Number of times stack has grown.  */
+    long shaseg:32;             /* Size of increments to stack.  */
+    long shhwm:32;              /* High water mark of stack.  */
+    long shsize:32;             /* Current size of stack (all segments).  */
+  };
+
+/* The stack segment linkage control information occurs at
+   the high-address end of a stack segment.  (The stack
+   grows from low addresses to high addresses.)  The initial
+   part of the stack segment linkage control information is
+   0200 (octal) words.  This provides for register storage
+   for the routine which overflows the stack.  */
+
+struct stack_segment_linkage
+  {
+    long ss[0200];              /* 0200 overflow words.  */
+    long sssize:32;             /* Number of words in this segment.  */
+    long ssbase:32;             /* Offset to stack base.  */
+    long:32;
+    long sspseg:32;             /* Offset to linkage control of previous
+                                   segment of stack.  */
+    long:32;
+    long sstcpt:32;             /* Pointer to task common address block.  */
+    long sscsnm;                /* Private control structure number for
+                                   microtasking.  */
+    long ssusr1;                /* Reserved for user.  */
+    long ssusr2;                /* Reserved for user.  */
+    long sstpid;                /* Process ID for pid based multi-tasking.  */
+    long ssgvup;                /* Pointer to multitasking thread giveup.  */
+    long sscray[7];             /* Reserved for Cray Research.  */
+    long ssa0;
+    long ssa1;
+    long ssa2;
+    long ssa3;
+    long ssa4;
+    long ssa5;
+    long ssa6;
+    long ssa7;
+    long sss0;
+    long sss1;
+    long sss2;
+    long sss3;
+    long sss4;
+    long sss5;
+    long sss6;
+    long sss7;
+  };
+
+#    else /* CRAY2 */
+/* The following structure defines the vector of words
+   returned by the STKSTAT library routine.  */
+struct stk_stat
+  {
+    long now;                   /* Current total stack size.  */
+    long maxc;                  /* Amount of contiguous space which would
+                                   be required to satisfy the maximum
+                                   stack demand to date.  */
+    long high_water;            /* Stack high-water mark.  */
+    long overflows;             /* Number of stack overflow ($STKOFEN) calls.  */
+    long hits;                  /* Number of internal buffer hits.  */
+    long extends;               /* Number of block extensions.  */
+    long stko_mallocs;          /* Block allocations by $STKOFEN.  */
+    long underflows;            /* Number of stack underflow calls ($STKRETN).  */
+    long stko_free;             /* Number of deallocations by $STKRETN.  */
+    long stkm_free;             /* Number of deallocations by $STKMRET.  */
+    long segments;              /* Current number of stack segments.  */
+    long maxs;                  /* Maximum number of stack segments so far.  */
+    long pad_size;              /* Stack pad size.  */
+    long current_address;       /* Current stack segment address.  */
+    long current_size;          /* Current stack segment size.  This
+                                   number is actually corrupted by STKSTAT to
+                                   include the fifteen word trailer area.  */
+    long initial_address;       /* Address of initial segment.  */
+    long initial_size;          /* Size of initial segment.  */
+  };
+
+/* The following structure describes the data structure which trails
+   any stack segment.  I think that the description in 'asdef' is
+   out of date.  I only describe the parts that I am sure about.  */
+
+struct stk_trailer
+  {
+    long this_address;          /* Address of this block.  */
+    long this_size;             /* Size of this block (does not include
+                                   this trailer).  */
+    long unknown2;
+    long unknown3;
+    long link;                  /* Address of trailer block of previous
+                                   segment.  */
+    long unknown5;
+    long unknown6;
+    long unknown7;
+    long unknown8;
+    long unknown9;
+    long unknown10;
+    long unknown11;
+    long unknown12;
+    long unknown13;
+    long unknown14;
+  };
+
+#    endif /* CRAY2 */
+#   endif /* not CRAY_STACK */
+
+#   ifdef CRAY2
+/* Determine a "stack measure" for an arbitrary ADDRESS.
+   I doubt that "lint" will like this much.  */
+
+static long
+i00afunc (long *address)
+{
+  struct stk_stat status;
+  struct stk_trailer *trailer;
+  long *block, size;
+  long result = 0;
+
+  /* We want to iterate through all of the segments.  The first
+     step is to get the stack status structure.  We could do this
+     more quickly and more directly, perhaps, by referencing the
+     $LM00 common block, but I know that this works.  */
+
+  STKSTAT (&status);
+
+  /* Set up the iteration.  */
+
+  trailer = (struct stk_trailer *) (status.current_address
+                                    + status.current_size
+                                    - 15);
+
+  /* There must be at least one stack segment.  Therefore it is
+     a fatal error if "trailer" is null.  */
+
+  if (trailer == 0)
+    abort ();
+
+  /* Discard segments that do not contain our argument address.  */
+
+  while (trailer != 0)
+    {
+      block = (long *) trailer->this_address;
+      size = trailer->this_size;
+      if (block == 0 || size == 0)
+        abort ();
+      trailer = (struct stk_trailer *) trailer->link;
+      if ((block <= address) && (address < (block + size)))
+        break;
+    }
+
+  /* Set the result to the offset in this segment and add the sizes
+     of all predecessor segments.  */
+
+  result = address - block;
+
+  if (trailer == 0)
+    {
+      return result;
+    }
+
+  do
+    {
+      if (trailer->this_size <= 0)
+        abort ();
+      result += trailer->this_size;
+      trailer = (struct stk_trailer *) trailer->link;
+    }
+  while (trailer != 0);
+
+  /* We are done.  Note that if you present a bogus address (one
+     not in any segment), you will get a different number back, formed
+     from subtracting the address of the first block.  This is probably
+     not what you want.  */
+
+  return (result);
+}
+
+#   else /* not CRAY2 */
+/* Stack address function for a CRAY-1, CRAY X-MP, or CRAY Y-MP.
+   Determine the number of the cell within the stack,
+   given the address of the cell.  The purpose of this
+   routine is to linearize, in some sense, stack addresses
+   for alloca.  */
+
+static long
+i00afunc (long address)
+{
+  long stkl = 0;
+
+  long size, pseg, this_segment, stack;
+  long result = 0;
+
+  struct stack_segment_linkage *ssptr;
+
+  /* Register B67 contains the address of the end of the
+     current stack segment.  If you (as a subprogram) store
+     your registers on the stack and find that you are past
+     the contents of B67, you have overflowed the segment.
+
+     B67 also points to the stack segment linkage control
+     area, which is what we are really interested in.  */
+
+  stkl = CRAY_STACKSEG_END ();
+  ssptr = (struct stack_segment_linkage *) stkl;
+
+  /* If one subtracts 'size' from the end of the segment,
+     one has the address of the first word of the segment.
+
+     If this is not the first segment, 'pseg' will be
+     nonzero.  */
+
+  pseg = ssptr->sspseg;
+  size = ssptr->sssize;
+
+  this_segment = stkl - size;
+
+  /* It is possible that calling this routine itself caused
+     a stack overflow.  Discard stack segments which do not
+     contain the target address.  */
+
+  while (!(this_segment <= address && address <= stkl))
+    {
+#    ifdef DEBUG_I00AFUNC
+      fprintf (stderr, "%011o %011o %011o\n", this_segment, address, stkl);
+#    endif
+      if (pseg == 0)
+        break;
+      stkl = stkl - pseg;
+      ssptr = (struct stack_segment_linkage *) stkl;
+      size = ssptr->sssize;
+      pseg = ssptr->sspseg;
+      this_segment = stkl - size;
+    }
+
+  result = address - this_segment;
+
+  /* If you subtract pseg from the current end of the stack,
+     you get the address of the previous stack segment's end.
+     This seems a little convoluted to me, but I'll bet you save
+     a cycle somewhere.  */
+
+  while (pseg != 0)
+    {
+#    ifdef DEBUG_I00AFUNC
+      fprintf (stderr, "%011o %011o\n", pseg, size);
+#    endif
+      stkl = stkl - pseg;
+      ssptr = (struct stack_segment_linkage *) stkl;
+      size = ssptr->sssize;
+      pseg = ssptr->sspseg;
+      result += size;
+    }
+  return (result);
+}
+
+#   endif /* not CRAY2 */
+#  endif /* CRAY */
+
+# endif /* no alloca */
+#endif /* not GCC 2 */