diff options
author | Don Breazeal <donb@codesourcery.com> | 2015-08-26 13:26:36 -0700 |
---|---|---|
committer | Don Breazeal <donb@codesourcery.com> | 2015-08-26 13:38:40 -0700 |
commit | 8d37573b4356a38d091b0f18b69f91797a7cef26 (patch) | |
tree | 0913ee7c8d4fba833fddc4b4aef9844fb8235224 /gdb | |
parent | ba49e44bdcfdb5e936686a42d84e5ca043267cab (diff) | |
download | gdb-8d37573b4356a38d091b0f18b69f91797a7cef26.zip gdb-8d37573b4356a38d091b0f18b69f91797a7cef26.tar.gz gdb-8d37573b4356a38d091b0f18b69f91797a7cef26.tar.bz2 |
New test for follow-exec-mode
This patch implements a new GDB test for follow-exec-mode. Although
there is a GDB test for debugging across an exec, there is no test for
follow-exec-mode. This test is derived from gdb.base/foll-exec.exp,
and re-uses execd-prog.c as the program to exec.
The following behavior is tested:
follow-exec-mode == "same"
- 'next' over the exec, check for one inferior
- 'continue' past the exec to a breakpoint, check for one inferior
- after the exec, use a 'run' command to run the current binary
follow-exec-mode == "new"
- 'next' over the exec, check for two inferiors
- 'continue' past the exec to a breakpoint, check for two inferiors
- after the exec, use a 'run' command to run the current binary
- after the exec, use the 'inferior' command to switch inferiors,
then use a 'run' command to run the current binary
Note that single-step breakpoints do not survive across an exec.
There has to be a breakpoint in the execed program in order for
it to stop right after the exec.
gdb/testsuite/ChangeLog:
* gdb.base/foll-exec-2.c: New test program.
* gdb.base/foll-exec-2.exp: New test.
Diffstat (limited to 'gdb')
-rw-r--r-- | gdb/testsuite/ChangeLog | 5 | ||||
-rw-r--r-- | gdb/testsuite/gdb.base/foll-exec-mode.c | 36 | ||||
-rw-r--r-- | gdb/testsuite/gdb.base/foll-exec-mode.exp | 201 |
3 files changed, 242 insertions, 0 deletions
diff --git a/gdb/testsuite/ChangeLog b/gdb/testsuite/ChangeLog index 15ad42c..77680b6 100644 --- a/gdb/testsuite/ChangeLog +++ b/gdb/testsuite/ChangeLog @@ -1,3 +1,8 @@ +2015-08-26 Don Breazeal <donb@codesourcery.com> + + * gdb.base/foll-exec-2.c: New test program. + * gdb.base/foll-exec-2.exp: New test. + 2015-08-25 Pierre-Marie de Rodat <derodat@adacore.com> * gdb.base/nested-subp1.exp: New file. diff --git a/gdb/testsuite/gdb.base/foll-exec-mode.c b/gdb/testsuite/gdb.base/foll-exec-mode.c new file mode 100644 index 0000000..baf4217 --- /dev/null +++ b/gdb/testsuite/gdb.base/foll-exec-mode.c @@ -0,0 +1,36 @@ +/* This test program is part of GDB, the GNU debugger. + + Copyright 2015 Free Software Foundation, Inc. + + This program is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 3 of the License, or + (at your option) any later version. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program. If not, see <http://www.gnu.org/licenses/>. */ + +#include <stdio.h> +#include <stdlib.h> +#include <unistd.h> +#include <string.h> + +int global_i = 100; + +int main (void) +{ + int local_j = global_i + 1; + int local_k = local_j + 1; + + printf ("foll-exec is about to execlp(execd-prog)...\n"); + + execlp (BASEDIR "/execd-prog", /* Set breakpoint here. */ + "/execd-prog", + "execlp arg1 from foll-exec", + (char *) 0); +} diff --git a/gdb/testsuite/gdb.base/foll-exec-mode.exp b/gdb/testsuite/gdb.base/foll-exec-mode.exp new file mode 100644 index 0000000..3dc44a2 --- /dev/null +++ b/gdb/testsuite/gdb.base/foll-exec-mode.exp @@ -0,0 +1,201 @@ +# Copyright 1997-2015 Free Software Foundation, Inc. + +# This program is free software; you can redistribute it and/or modify +# it under the terms of the GNU General Public License as published by +# the Free Software Foundation; either version 3 of the License, or +# (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program. If not, see <http://www.gnu.org/licenses/>. + +# This is a test of gdb's follow-exec-mode. +# +# It first checks that exec events are supported by using a catchpoint, +# then tests multiple scenarios for follow-exec-mode using parameters +# that test: +# - each mode +# - different commands to execute past the exec +# - re-running both the original and new inferiors. +# +# Note that we can't single-step past an exec call. There has to +# be a breakpoint in order to stop after the exec, even if we use +# a single-step command to execute past the exec. + +if { [is_remote target] || ![isnative] } then { + continue +} + +# Until "catch exec" is implemented on other targets... +# +if {![istarget "hppa*-hp-hpux*"] && ![istarget "*-linux*"]} then { + continue +} + +standard_testfile foll-exec-mode.c + +set testfile2 "execd-prog" +set srcfile2 ${testfile2}.c +set binfile2 [standard_output_file ${testfile2}] + +set compile_options debug +set dirname [relative_filename [pwd] [file dirname $binfile]] +lappend compile_options "additional_flags=-DBASEDIR=\"$dirname\"" + +# build the first test case +if { [gdb_compile "${srcdir}/${subdir}/${srcfile2}" "${binfile2}" executable $compile_options] != "" } { + untested foll-exec-mode.exp + return -1 +} + +if { [gdb_compile "${srcdir}/${subdir}/${srcfile}" "${binfile}" executable $compile_options] != "" } { + untested foll-exec-mode.exp + return -1 +} + +# Test exec catchpoints to ensure exec events are supported. +# +proc do_catch_exec_test { } { + global testfile + global gdb_prompt + + clean_restart $testfile + + # Start the program running, and stop at main. + # + if ![runto_main] then { + fail "Couldn't run ${testfile}" + return + } + + # Verify that the system supports "catch exec". + gdb_test "catch exec" "Catchpoint \[0-9\]* \\(exec\\)" "insert first exec catchpoint" + set has_exec_catchpoints 0 + gdb_test_multiple "continue" "continue to first exec catchpoint" { + -re ".*Your system does not support this type\r\nof catchpoint.*$gdb_prompt $" { + unsupported "continue to first exec catchpoint" + } + -re ".*Catchpoint.*$gdb_prompt $" { + set has_exec_catchpoints 1 + pass "continue to first exec catchpoint" + } + } + + if {$has_exec_catchpoints == 0} { + unsupported "exec catchpoints" + return + } +} + +# Test follow-exec-mode in the specified scenario. +# MODE determines whether follow-exec-mode is "same" or "new". +# CMD determines the command used to execute past the exec call. +# INFSWITCH is ignored for MODE == "same", and for "new" it is +# used to determine whether to switch to the original inferior +# before re-running. + +proc do_follow_exec_mode_tests { mode cmd infswitch } { + global binfile srcfile srcfile2 testfile testfile2 + global gdb_prompt + + with_test_prefix "$mode,$cmd,$infswitch" { + clean_restart $testfile + + # Start the program running, and stop at main. + # + if ![runto_main] then { + fail "Couldn't run ${testfile}" + return + } + + # Set the follow-exec mode. + # + gdb_test_no_output "set follow-exec-mode $mode" + + # Run to the line of the exec call. + # + gdb_breakpoint [gdb_get_line_number "Set breakpoint here"] + gdb_continue_to_breakpoint "continue to line of exec call" + + # Set up the output we expect to see after we execute past the exec. + # + set execd_line [gdb_get_line_number "after-exec" $srcfile2] + set expected_re ".*xecuting new program: .*${testfile2}.*Breakpoint .,.*${srcfile2}:${execd_line}.*$gdb_prompt $" + + # Set a breakpoint after the exec call if we aren't single-stepping + # past it. + # + if {$cmd == "continue"} { + gdb_breakpoint "$execd_line" + } + + # Execute past the exec call. + # + set test "$cmd past exec" + gdb_test_multiple $cmd $test { + -re "$expected_re" { + pass $test + } + } + + # Set expected output, given the test parameters. + # + if {$mode == "same"} { + set expected_re "\\* 1.*process.*" + } else { + set expected_re "\\* 2.*process.*$testfile2 \r\n 1.*null.*$testfile.*" + } + + # Check that the inferior list is correct: + # - one inferior for MODE == "same" + # - two inferiors for MODE == "new", current is execd program + # + gdb_test "info inferiors" $expected_re "Check inferior list" + + set expected_inf "" + if {$mode == "same"} { + # One inferior, the execd program. + set expected_inf $testfile2 + } elseif {$infswitch == "infswitch"} { + # Two inferiors, we have switched to the original program. + set expected_inf $testfile + gdb_test "inferior 1" "Switching to inferior 1.*$testfile.*" "Switch inferiors" + } else { + # Two inferiors, run the execd program + set expected_inf $testfile2 + } + + # Now check that a 'run' command will run the correct inferior. + # + set test "use correct executable ($expected_inf) for run after follow exec" + gdb_run_cmd + gdb_test_multiple "" $test { + -re {Start it from the beginning\? \(y or n\) $} { + send_gdb "y\n" + exp_continue + } + -re "Starting program: .*$expected_inf.*Breakpoint .,.*\r\n$gdb_prompt $" { + pass $test + } + } + } +} + +do_catch_exec_test + +foreach cmd {"next" "continue"} { + foreach mode {"same" "new"} { + # Test basic follow-exec-mode. + do_follow_exec_mode_tests $mode $cmd "no_infswitch" + if {$mode == "new"} { + # Test that when we do 'run' we get the correct executable. + do_follow_exec_mode_tests $mode $cmd "infswitch" + } + } +} + +return 0 |