* top.c (gdb_readline): Allow CRLF line termination on systems

which define CRLF_SOURCE_FILES.
* win32-nat.c: 1) Add thread support, 2) fix ability to attach to
a running process, and 3) implement limited support for cygwin
signals.
(thread_rec): New function.
(child_add_thread): Ditto.
(child_init_thread_list): Ditto.
(child_delete_thread): Ditto.
(do_child_fetch_inferior_registers): Ditto.
(do_child_store_inferior_registers): Ditto.
(handle_output_debug_string): Ditto.
(child_fetch_inferior_registers): Use do_* function to perform
operation.
(child_store_inferior_registers): Ditto.
(child_continue): Ditto.
(child_thread_alive): Ditto.
(cygwin_pid_to_str): Ditto.
(handle_load_dll): Reorganize, add first attempt at reading
dll names from attached processes.  Change info messages to provide
more information when dll is already loaded.
(handle_exception): Changes mandated by new thread-aware structures.
(child_wait): Track thread creation/destruction.  Handle cygwin
signals.
(child_create_inferior): Ditto.
(child_resume): Ditto.
(child_kill_inferior): Ditto.  Close child process handle to avoid a
handle leak.
(child_ops): Fill out child_ops fields that deal with threads.
* config/i386/tm-cygwin32.h: Declare function and macro needed
for converting a cygwin "pid" to a string.
* config/i386/xm-cygwin32.h: define HAVE_SIGSETMASK as 0 since
sigsetmask is not defined in cygwin.

6 files changed, 2317 insertions, 2072 deletions

diff --git a/gdb/ChangeLog b/gdb/ChangeLog
index 0b9904b..ea79e13 100644
--- a/gdb/ChangeLog
+++ b/gdb/ChangeLog
@@ -1,3 +1,39 @@
+Thu Nov  5 08:41:33 1998  Christopher Faylor <cgf@cygnus.com>
+
+	* top.c (gdb_readline): Allow CRLF line termination on systems
+	which define CRLF_SOURCE_FILES.
+	* win32-nat.c: 1) Add thread support, 2) fix ability to attach to
+	a running process, and 3) implement limited support for cygwin
+	signals.
+	(thread_rec): New function.
+	(child_add_thread): Ditto.
+	(child_init_thread_list): Ditto.
+	(child_delete_thread): Ditto.
+	(do_child_fetch_inferior_registers): Ditto.
+	(do_child_store_inferior_registers): Ditto.
+	(handle_output_debug_string): Ditto.
+	(child_fetch_inferior_registers): Use do_* function to perform
+	operation.
+	(child_store_inferior_registers): Ditto.
+	(child_continue): Ditto.
+	(child_thread_alive): Ditto.
+	(cygwin_pid_to_str): Ditto.
+	(handle_load_dll): Reorganize, add first attempt at reading
+	dll names from attached processes.  Change info messages to provide
+	more information when dll is already loaded.
+	(handle_exception): Changes mandated by new thread-aware structures.
+	(child_wait): Track thread creation/destruction.  Handle cygwin
+	signals.
+	(child_create_inferior): Ditto.
+	(child_resume): Ditto.
+	(child_kill_inferior): Ditto.  Close child process handle to avoid a
+	handle leak.
+	(child_ops): Fill out child_ops fields that deal with threads.
+	* config/i386/tm-cygwin32.h: Declare function and macro needed
+	for converting a cygwin "pid" to a string.
+	* config/i386/xm-cygwin32.h: define HAVE_SIGSETMASK as 0 since
+	sigsetmask is not defined in cygwin.
+
 Thu Nov  5 08:38:18 1998  Christopher Faylor <cgf@cygnus.com>
 
 	* win32-nat.c: Remove obsolete PPC conditionals.
diff --git a/gdb/config/i386/tm-cygwin32.h b/gdb/config/i386/tm-cygwin32.h
index f7464ba..b1ad894 100644
--- a/gdb/config/i386/tm-cygwin32.h
+++ b/gdb/config/i386/tm-cygwin32.h
@@ -119,7 +119,9 @@ double_to_i387 PARAMS ((char *, char *));
 
 #define NAMES_HAVE_UNDERSCORE
 
-
 #define IN_SOLIB_CALL_TRAMPOLINE(pc, name) skip_trampoline_code (pc, name)
 #define SKIP_TRAMPOLINE_CODE(pc)           skip_trampoline_code (pc, 0)
 extern CORE_ADDR skip_trampoline_code PARAMS ((CORE_ADDR pc, char *name));
+
+extern char *cygwin_pid_to_str PARAMS ((int pid));
+#define target_pid_to_str(PID) cygwin_pid_to_str (PID)
diff --git a/gdb/config/i386/xm-cygwin32.h b/gdb/config/i386/xm-cygwin32.h
index b722f97..4482780 100644
--- a/gdb/config/i386/xm-cygwin32.h
+++ b/gdb/config/i386/xm-cygwin32.h
@@ -34,3 +34,5 @@ Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  */
 
 /* Define this if source files use \r\n rather than just \n.  */
 #define CRLF_SOURCE_FILES
+
+#define HAVE_SIGSETMASK 0
diff --git a/gdb/doc/gdbint.texinfo b/gdb/doc/gdbint.texinfo
index 412020e..bbc5437 100644
--- a/gdb/doc/gdbint.texinfo
+++ b/gdb/doc/gdbint.texinfo
@@ -1,6 +1,5 @@
 \input texinfo
 @setfilename gdbint.info
-@c $Id$
 
 @ifinfo
 @format
@@ -13,18 +12,19 @@ END-INFO-DIR-ENTRY
 @ifinfo
 This file documents the internals of the GNU debugger GDB.
 
-Copyright 1990, 91, 92, 93, 94, 95, 96, 1997 Free Software Foundation, Inc.
-Contributed by Cygnus Support.  Written by John Gilmore.
+Copyright 1990, 91, 92, 93, 94, 95, 96, 97, 1998 Free Software Foundation, Inc.
+Contributed by Cygnus Solutions.  Written by John Gilmore.
+Second Edition by Stan Shebs.
 
-Permission is granted to make and distribute verbatim copies of
-this manual provided the copyright notice and this permission notice
-are preserved on all copies.
+Permission is granted to make and distribute verbatim copies of this
+manual provided the copyright notice and this permission notice are
+preserved on all copies.
 
 @ignore
 Permission is granted to process this file through Tex and print the
-results, provided the printed document carries copying permission
-notice identical to this one except for the removal of this paragraph
-(this paragraph not being relevant to the printed manual).
+results, provided the printed document carries copying permission notice
+identical to this one except for the removal of this paragraph (this
+paragraph not being relevant to the printed manual).
 
 @end ignore
 Permission is granted to copy or distribute modified versions of this
@@ -34,24 +34,28 @@ regarded as a program in the language TeX).
 
 @setchapternewpage off
 @settitle GDB Internals
+
 @titlepage
-@title{Working in GDB}
+@title{GDB Internals}
 @subtitle{A guide to the internals of the GNU debugger}
 @author John Gilmore
-@author Cygnus Support
+@author Cygnus Solutions
+@author Second Edition:
+@author Stan Shebs
+@author Cygnus Solutions
 @page
 @tex
 \def\$#1${{#1}}  % Kluge: collect RCS revision info without $...$
 \xdef\manvers{\$Revision$}  % For use in headers, footers too
 {\parskip=0pt
-\hfill Cygnus Support\par
+\hfill Cygnus Solutions\par
 \hfill \manvers\par
 \hfill \TeX{}info \texinfoversion\par
 }
 @end tex
 
 @vskip 0pt plus 1filll
-Copyright @copyright{} 1990, 91, 92, 93, 94, 95, 96, 1997 Free Software Foundation, Inc.
+Copyright @copyright{} 1990, 91, 92, 93, 94, 95, 96, 97, 1998 Free Software Foundation, Inc.
 
 Permission is granted to make and distribute verbatim copies of
 this manual provided the copyright notice and this permission notice
@@ -64,181 +68,111 @@ are preserved on all copies.
 @c not for TeX).  Existing GNU manuals seem inconsistent on this point.
 @top Scope of this Document
 
-This document documents the internals of the GNU debugger, GDB.  It is
-intended to document aspects of GDB which apply across many different
-parts of GDB (for example, @pxref{Coding Style}), or which are global
-aspects of design (for example, what are the major modules and which
-files document them in detail?).  Information which pertains to specific
-data structures, functions, variables, etc., should be put in comments
-in the source code, not here.  It is more likely to get noticed and kept
-up to date there.  Some of the information in this document should
-probably be moved into comments.
+This document documents the internals of the GNU debugger, GDB.  It
+includes description of GDB's key algorithms and operations, as well
+as the mechanisms that adapt GDB to specific hosts and targets.
 
 @menu
-* README::			The README File
-* Getting Started::		Getting started working on GDB
-* Debugging GDB::		Debugging GDB with itself
-* New Architectures::		Defining a New Host or Target Architecture
-* Config::			Adding a New Configuration
-* Host::			Adding a New Host
-* Native::			Adding a New Native Configuration
-* Target::			Adding a New Target
-* Languages::			Defining New Source Languages
-* Releases::			Configuring GDB for Release
-* Partial Symbol Tables::	How GDB reads symbols quickly at startup
-* Types::			How GDB keeps track of types
-* BFD support for GDB::		How BFD and GDB interface
-* Symbol Reading::		Defining New Symbol Readers
-* Cleanups::			Cleanups
-* Wrapping::			Wrapping Output Lines
-* Frames::			Keeping track of function calls
-* Remote Stubs::		Code that runs in targets and talks to GDB
-* Longjmp Support::		Stepping through longjmp's in the target
-* Coding Style::		Strunk and White for GDB maintainers
-* Clean Design::		Frank Lloyd Wright for GDB maintainers
-* Submitting Patches::		How to get your changes into GDB releases
-* Host Conditionals::		What features exist in the host
-* Target Conditionals::		What features exist in the target
-* Native Conditionals::		Conditionals for when host and target are same
-* Obsolete Conditionals::	Conditionals that don't exist any more
-* XCOFF::			The Object file format used on IBM's RS/6000
+* Requirements::
+* Overall Structure::
+* Algorithms::
+* User Interface::
+* Symbol Handling::
+* Language Support::
+* Host Definition::
+* Target Architecture Definition::
+* Target Vector Definition::
+* Native Debugging::
+* Support Libraries::
+* Coding::
+* Porting GDB::
+* Hints::
 @end menu
 
-@node README
-@chapter The @file{README} File
+@node Requirements
 
-Check the @file{README} file, it often has useful information that does not
-appear anywhere else in the directory.
+@chapter Requirements
 
-@node Getting Started
-@chapter Getting Started Working on GDB
+Before diving into the internals, you should understand the formal
+requirements and other expectations for GDB.  Although some of these may
+seem obvious, there have been proposals for GDB that have run counter to
+these requirements.
 
-GDB is a large and complicated program, and if you first starting to
-work on it, it can be hard to know where to start.  Fortunately, if you
-know how to go about it, there are ways to figure out what is going on:
+First of all, GDB is a debugger.  It's not designed to be a front panel
+for embedded systems.  It's not a text editor.  It's not a shell.  It's
+not a programming environment.
 
-@itemize @bullet
-@item
-This manual, the GDB Internals manual, has information which applies
-generally to many parts of GDB.
+GDB is an interactive tool.  Although a batch mode is available, GDB's
+primary role is to interact with a human programmer.
 
-@item
-Information about particular functions or data structures are located in
-comments with those functions or data structures.  If you run across a
-function or a global variable which does not have a comment correctly
-explaining what is does, this can be thought of as a bug in GDB; feel
-free to submit a bug report, with a suggested comment if you can figure
-out what the comment should say (@pxref{Submitting Patches}).  If you
-find a comment which is actually wrong, be especially sure to report that.
+GDB should be responsive to the user.  A programmer hot on the trail of
+a nasty bug, and operating under a looming deadline, is going to be very
+impatient of everything, including the response time to debugger
+commands.
 
-Comments explaining the function of macros defined in host, target, or
-native dependent files can be in several places.  Sometimes they are
-repeated every place the macro is defined.  Sometimes they are where the
-macro is used.  Sometimes there is a header file which supplies a
-default definition of the macro, and the comment is there.  This manual
-also has a list of macros (@pxref{Host Conditionals}, @pxref{Target
-Conditionals}, @pxref{Native Conditionals}, and @pxref{Obsolete
-Conditionals}) with some documentation.
+GDB should be relatively permissive, such as for expressions.  While the
+compiler should be picky (or have the option to be made picky), since
+source code lives for a long time usually, the programmer doing
+debugging shouldn't be spending time figuring out to mollify the
+debugger.
 
-@item
-Start with the header files.  Once you some idea of how GDB's internal
-symbol tables are stored (see @file{symtab.h}, @file{gdbtypes.h}), you
-will find it much easier to understand the code which uses and creates
-those symbol tables.
+GDB will be called upon to deal with really large programs.  Executable
+sizes of 50 to 100 megabytes occur regularly, and we've heard reports of
+programs approaching 1 gigabyte in size.
 
-@item
-You may wish to process the information you are getting somehow, to
-enhance your understanding of it.  Summarize it, translate it to another
-language, add some (perhaps trivial or non-useful) feature to GDB, use
-the code to predict what a test case would do and write the test case
-and verify your prediction, etc.  If you are reading code and your eyes
-are starting to glaze over, this is a sign you need to use a more active
-approach.
+GDB should be able to run everywhere.  No other debugger is available
+for even half as many configurations as GDB supports.
 
-@item
-Once you have a part of GDB to start with, you can find more
-specifically the part you are looking for by stepping through each
-function with the @code{next} command.  Do not use @code{step} or you
-will quickly get distracted; when the function you are stepping through
-calls another function try only to get a big-picture understanding
-(perhaps using the comment at the beginning of the function being
-called) of what it does.  This way you can identify which of the
-functions being called by the function you are stepping through is the
-one which you are interested in.  You may need to examine the data
-structures generated at each stage, with reference to the comments in
-the header files explaining what the data structures are supposed to
-look like.
 
-Of course, this same technique can be used if you are just reading the
-code, rather than actually stepping through it.  The same general
-principle applies---when the code you are looking at calls something
-else, just try to understand generally what the code being called does,
-rather than worrying about all its details.
+@node Overall Structure
 
-@item
-A good place to start when tracking down some particular area is with a
-command which invokes that feature.  Suppose you want to know how
-single-stepping works.  As a GDB user, you know that the @code{step}
-command invokes single-stepping.  The command is invoked via command
-tables (see @file{command.h}); by convention the function which actually
-performs the command is formed by taking the name of the command and
-adding @samp{_command}, or in the case of an @code{info} subcommand,
-@samp{_info}.  For example, the @code{step} command invokes the
-@code{step_command} function and the @code{info display} command invokes
-@code{display_info}.  When this convention is not followed, you might
-have to use @code{grep} or @kbd{M-x tags-search} in emacs, or run GDB on
-itself and set a breakpoint in @code{execute_command}.
+@chapter Overall Structure
 
-@item
-If all of the above fail, it may be appropriate to ask for information
-on @code{bug-gdb}.  But @emph{never} post a generic question like ``I was
-wondering if anyone could give me some tips about understanding
-GDB''---if we had some magic secret we would put it in this manual.
-Suggestions for improving the manual are always welcome, of course.
-@end itemize
+GDB consists of three major subsystems: user interface, symbol handling
+(the ``symbol side''), and target system handling (the ``target side'').
 
-Good luck!
+Ther user interface consists of several actual interfaces, plus
+supporting code.
 
-@node Debugging GDB
-@chapter Debugging GDB with itself
-If GDB is limping on your machine, this is the preferred way to get it
-fully functional.  Be warned that in some ancient Unix systems, like
-Ultrix 4.2, a program can't be running in one process while it is being
-debugged in another.  Rather than typing the command @code{@w{./gdb
-./gdb}}, which works on Suns and such, you can copy @file{gdb} to
-@file{gdb2} and then type @code{@w{./gdb ./gdb2}}.
+The symbol side consists of object file readers, debugging info
+interpreters, symbol table management, source language expression
+parsing, type and value printing.
 
-When you run GDB in the GDB source directory, it will read a
-@file{.gdbinit} file that sets up some simple things to make debugging
-gdb easier.  The @code{info} command, when executed without a subcommand
-in a GDB being debugged by gdb, will pop you back up to the top level
-gdb.  See @file{.gdbinit} for details.
+The target side consists of execution control, stack frame analysis, and
+physical target manipulation.
 
-If you use emacs, you will probably want to do a @code{make TAGS} after
-you configure your distribution; this will put the machine dependent
-routines for your local machine where they will be accessed first by
-@kbd{M-.}
+The target side/symbol side division is not formal, and there are a
+number of exceptions.  For instance, core file support involves symbolic
+elements (the basic core file reader is in BFD) and target elements (it
+supplies the contents of memory and the values of registers).  Instead,
+this division is useful for understanding how the minor subsystems
+should fit together.
 
-Also, make sure that you've either compiled GDB with your local cc, or
-have run @code{fixincludes} if you are compiling with gcc.
+@section The Symbol Side
+
+The symbolic side of GDB can be thought of as ``everything you can do in
+GDB without having a live program running''.  For instance, you can look
+at the types of variables, and evaluate many kinds of expressions.
+
+@section The Target Side
 
-@node New Architectures
-@chapter Defining a New Host or Target Architecture
+The target side of GDB is the ``bits and bytes manipulator''.  Although
+it may make reference to symbolic info here and there, most of the
+target side will run with only a stripped executable available -- or
+even no executable at all, in remote debugging cases.
 
-When building support for a new host and/or target, much of the work you
-need to do is handled by specifying configuration files;
-@pxref{Config,,Adding a New Configuration}.  Further work can be
-divided into ``host-dependent'' (@pxref{Host,,Adding a New Host}) and
-``target-dependent'' (@pxref{Target,,Adding a New Target}).  The
-following discussion is meant to explain the difference between hosts
-and targets.
+Operations such as disassembly, stack frame crawls, and register
+display, are able to work with no symbolic info at all.  In some cases,
+such as disassembly, GDB will use symbolic info to present addresses
+relative to symbols rather than as raw numbers, but it will work either
+way.
 
-@heading What is considered ``host-dependent'' versus ``target-dependent''?
+@section Configurations
 
 @dfn{Host} refers to attributes of the system where GDB runs.
 @dfn{Target} refers to the system where the program being debugged
-executes.   In most cases they are the same machine, in which case
-a third type of @dfn{Native} attributes come into play.
+executes.  In most cases they are the same machine, in which case a
+third type of @dfn{Native} attributes come into play.
 
 Defines and include files needed to build on the host are host support.
 Examples are tty support, system defined types, host byte order, host
@@ -253,421 +187,438 @@ Information that is only needed when the host and target are the same,
 is native dependent.  One example is Unix child process support; if the
 host and target are not the same, doing a fork to start the target
 process is a bad idea.  The various macros needed for finding the
-registers in the @code{upage}, running @code{ptrace}, and such are all in the
-native-dependent files.
+registers in the @code{upage}, running @code{ptrace}, and such are all
+in the native-dependent files.
 
-Another example of native-dependent code is support for features
-that are really part of the target environment, but which require 
-@code{#include} files that are only available on the host system.
-Core file handling and @code{setjmp} handling are two common cases.
+Another example of native-dependent code is support for features that
+are really part of the target environment, but which require
+@code{#include} files that are only available on the host system.  Core
+file handling and @code{setjmp} handling are two common cases.
 
-When you want to make GDB work ``native'' on a particular
-machine, you have to include all three kinds of information.
+When you want to make GDB work ``native'' on a particular machine, you
+have to include all three kinds of information.
 
-The dependent information in GDB is organized into files by naming
-conventions.  
 
-Host-Dependent Files
-@table @file
-@item	config/*/*.mh
-Sets Makefile parameters
-@item	config/*/xm-*.h
-Global #include's and #define's and definitions
-@item	*-xdep.c
-Global variables and functions
-@end table
+@node Algorithms
 
-Native-Dependent Files
-@table @file
-@item	config/*/*.mh
-Sets Makefile parameters (for @emph{both} host and native)
-@item	config/*/nm-*.h
-#include's and #define's and definitions.  This file
-is only included by the small number of modules that need it,
-so beware of doing feature-test #define's from its macros.
-@item	*-nat.c
-global variables and functions
-@end table
+@chapter Algorithms
 
-Target-Dependent Files
-@table @file
-@item	config/*/*.mt
-Sets Makefile parameters
-@item	config/*/tm-*.h
-Global #include's and #define's and definitions
-@item	*-tdep.c
-Global variables and functions
-@end table
+GDB uses a number of debugging-specific algorithms.  They are often not
+very complicated, but get lost in the thicket of special cases and
+real-world issues.  This chapter describes the basic algorithms and
+mentions some of the specific target definitions that they use.
 
-At this writing, most supported hosts have had their host and native
-dependencies sorted out properly.  There are a few stragglers, which
-can be recognized by the absence of NATDEPFILES lines in their
-@file{config/*/*.mh}.
+@section Frames
 
-@node Config
-@chapter Adding a New Configuration
-
-Most of the work in making GDB compile on a new machine is in specifying
-the configuration of the machine.  This is done in a dizzying variety of
-header files and configuration scripts, which we hope to make more
-sensible soon.  Let's say your new host is called an @var{xxx} (e.g.
-@samp{sun4}), and its full three-part configuration name is
-@code{@var{xarch}-@var{xvend}-@var{xos}} (e.g.  @samp{sparc-sun-sunos4}).  In
-particular:
+A frame is a construct that GDB uses to keep track of calling and called
+functions.
 
-In the top level directory, edit @file{config.sub} and add @var{xarch},
-@var{xvend}, and @var{xos} to the lists of supported architectures,
-vendors, and operating systems near the bottom of the file.  Also, add
-@var{xxx} as an alias that maps to
-@code{@var{xarch}-@var{xvend}-@var{xos}}.  You can test your changes by
-running
+@code{FRAME_FP} in the machine description has no meaning to the
+machine-independent part of GDB, except that it is used when setting up
+a new frame from scratch, as follows:
 
 @example
-./config.sub @var{xxx}
-@end example
-@noindent
-and
-@example
-./config.sub @code{@var{xarch}-@var{xvend}-@var{xos}}
+      create_new_frame (read_register (FP_REGNUM), read_pc ()));
 @end example
-@noindent
-which should both respond with @code{@var{xarch}-@var{xvend}-@var{xos}}
-and no error messages.
 
-Now, go to the @file{bfd} directory and 
-create a new file @file{bfd/hosts/h-@var{xxx}.h}.  Examine the
-other @file{h-*.h} files as templates, and create one that brings in the
-right include files for your system, and defines any host-specific
-macros needed by BFD, the Binutils, GNU LD, or the Opcodes directories.
-(They all share the bfd @file{hosts} directory and the @file{configure.host}
-file.)
-
-Then edit @file{bfd/configure.host}.  Add a line to recognize your
-@code{@var{xarch}-@var{xvend}-@var{xos}} configuration, and set
-@code{my_host} to @var{xxx} when you recognize it.  This will cause your
-file @file{h-@var{xxx}.h} to be linked to @file{sysdep.h} at configuration
-time.  When creating the line that recognizes your configuration,
-only match the fields that you really need to match; e.g. don't
-match the architecture or manufacturer if the OS is sufficient
-to distinguish the configuration that your @file{h-@var{xxx}.h} file supports.
-Don't match the manufacturer name unless you really need to.
-This should make future ports easier.
-
-Also, if this host requires any changes to the Makefile, create a file
-@file{bfd/config/@var{xxx}.mh}, which includes the required lines.
-
-It's possible that the @file{libiberty} and @file{readline} directories
-won't need any changes for your configuration, but if they do, you can
-change the @file{configure.in} file there to recognize your system and
-map to an @file{mh-@var{xxx}} file.  Then add @file{mh-@var{xxx}}
-to the @file{config/} subdirectory, to set any makefile variables you
-need.  The only current options in there are things like @samp{-DSYSV}.
-(This @file{mh-@var{xxx}} naming convention differs from elsewhere
-in GDB, by historical accident.  It should be cleaned up so that all
-such files are called @file{@var{xxx}.mh}.)
-
-Aha!  Now to configure GDB itself!  Edit
-@file{gdb/configure.in} to recognize your system and set @code{gdb_host}
-to @var{xxx}, and (unless your desired target is already available) also
-set @code{gdb_target} to something appropriate (for instance,
-@var{xxx}).  To handle new hosts, modify the segment after the comment
-@samp{# per-host}; to handle new targets, modify after @samp{#
-per-target}.
-@c Would it be simpler to just use different per-host and per-target
-@c *scripts*, and call them from {configure} ?
+Other than that, all the meaning imparted to @code{FP_REGNUM} is
+imparted by the machine-dependent code.  So, @code{FP_REGNUM} can have
+any value that is convenient for the code that creates new frames.
+(@code{create_new_frame} calls @code{INIT_EXTRA_FRAME_INFO} if it is
+defined; that is where you should use the @code{FP_REGNUM} value, if
+your frames are nonstandard.)
+
+Given a GDB frame, define @code{FRAME_CHAIN} to determine the address of
+the calling function's frame.  This will be used to create a new GDB
+frame struct, and then @code{INIT_EXTRA_FRAME_INFO} and
+@code{INIT_FRAME_PC} will be called for the new frame.
+
+@section Breakpoint Handling
+
+In general, a breakpoint is a user-designated location in the program
+where the user wants to regain control if program execution ever reaches
+that location.
+
+There are two main ways to implement breakpoints; either as ``hardware''
+breakpoints or as ``software'' breakpoints.
+
+Hardware breakpoints are sometimes available as a builtin debugging
+features with some chips.  Typically these work by having dedicated
+register into which the breakpoint address may be stored.  If the PC
+ever matches a value in a breakpoint registers, the CPU raises an
+exception and reports it to GDB.  Another possibility is when an
+emulator is in use; many emulators include circuitry that watches the
+address lines coming out from the processor, and force it to stop if the
+address matches a breakpoint's address.  A third possibility is that the
+target already has the ability to do breakpoints somehow; for instance,
+a ROM monitor may do its own software breakpoints.  So although these
+are not literally ``hardware breakpoints'', from GDB's point of view
+they work the same; GDB need not do nothing more than set the breakpoint
+and wait for something to happen.
+
+Since they depend on hardware resources, hardware breakpoints may be
+limited in number; when the user asks for more, GDB will start trying to
+set software breakpoints.
+
+Software breakpoints require GDB to do somewhat more work.  The basic
+theory is that GDB will replace a program instruction a trap, illegal
+divide, or some other instruction that will cause an exception, and then
+when it's encountered, GDB will take the exception and stop the program.
+When the user says to continue, GDB will restore the original
+instruction, single-step, re-insert the trap, and continue on.
+
+Since it literally overwrites the program being tested, the program area
+must be writeable, so this technique won't work on programs in ROM.  It
+can also distort the behavior of programs that examine themselves,
+although the situation would be highly unusual.
+
+Also, the software breakpoint instruction should be the smallest size of
+instruction, so it doesn't overwrite an instruction that might be a jump
+target, and cause disaster when the program jumps into the middle of the
+breakpoint instruction.  (Strictly speaking, the breakpoint must be no
+larger than the smallest interval between instructions that may be jump
+targets; perhaps there is an architecture where only even-numbered
+instructions may jumped to.)  Note that it's possible for an instruction
+set not to have any instructions usable for a software breakpoint,
+although in practice only the ARC has failed to define such an
+instruction.
+
+The basic definition of the software breakpoint is the macro
+@code{BREAKPOINT}.
+
+Basic breakpoint object handling is in @file{breakpoint.c}.  However,
+much of the interesting breakpoint action is in @file{infrun.c}.
+
+@section Single Stepping
+
+@section Signal Handling
+
+@section Thread Handling
+
+@section Inferior Function Calls
+
+@section Longjmp Support
 
-Finally, you'll need to specify and define GDB's host-, native-, and
-target-dependent @file{.h} and @file{.c} files used for your
-configuration; the next two chapters discuss those.
+GDB has support for figuring out that the target is doing a
+@code{longjmp} and for stopping at the target of the jump, if we are
+stepping.  This is done with a few specialized internal breakpoints,
+which are visible in the @code{maint info breakpoint} command.
 
+To make this work, you need to define a macro called
+@code{GET_LONGJMP_TARGET}, which will examine the @code{jmp_buf}
+structure and extract the longjmp target address.  Since @code{jmp_buf}
+is target specific, you will need to define it in the appropriate
+@file{tm-@var{xyz}.h} file.  Look in @file{tm-sun4os4.h} and
+@file{sparc-tdep.c} for examples of how to do this.
 
-@node Host
-@chapter Adding a New Host
+@node User Interface
 
-Once you have specified a new configuration for your host
-(@pxref{Config,,Adding a New Configuration}), there are three remaining
-pieces to making GDB work on a new machine.  First, you have to make it
-host on the new machine (compile there, handle that machine's terminals
-properly, etc).  If you will be cross-debugging to some other kind of
-system that's already supported, you are done.
+@chapter User Interface
 
-If you want to use GDB to debug programs that run on the new machine,
-you have to get it to understand the machine's object files, symbol
-files, and interfaces to processes; @pxref{Target,,Adding a New Target}
-and @pxref{Native,,Adding a New Native Configuration}
+GDB has several user interfaces.  Although the command-line interface
+is the most common and most familiar, there are others.
 
-Several files control GDB's configuration for host systems:
+@section Command Interpreter
 
-@table @file
-@item gdb/config/@var{arch}/@var{xxx}.mh
-Specifies Makefile fragments needed when hosting on machine @var{xxx}.
-In particular, this lists the required machine-dependent object files,
-by defining @samp{XDEPFILES=@dots{}}.  Also
-specifies the header file which describes host @var{xxx}, by defining
-@code{XM_FILE= xm-@var{xxx}.h}.  You can also define @code{CC},
-@code{REGEX} and @code{REGEX1}, @code{SYSV_DEFINE}, @code{XM_CFLAGS},
-@code{XM_ADD_FILES}, @code{XM_CLIBS}, @code{XM_CDEPS},
-etc.; see @file{Makefile.in}.
+The command interpreter in GDB is fairly simple.  It is designed to
+allow for the set of commands to be augmented dynamically, and also
+has a recursive subcommand capability, where the first argument to
+a command may itself direct a lookup on a different command list.
 
-@item gdb/config/@var{arch}/xm-@var{xxx}.h
-(@file{xm.h} is a link to this file, created by configure).
-Contains C macro definitions describing the host system environment,
-such as byte order, host C compiler and library, ptrace support,
-and core file structure.  Crib from existing @file{xm-*.h} files
-to create a new one.
-
-@item gdb/@var{xxx}-xdep.c
-Contains any miscellaneous C code required for this machine
-as a host.  On many machines it doesn't exist at all.  If it does
-exist, put @file{@var{xxx}-xdep.o} into the @code{XDEPFILES} line
-in @file{gdb/config/mh-@var{xxx}}.
-@end table
+For instance, the @code{set} command just starts a lookup on the
+@code{setlist} command list, while @code{set thread} recurses
+to the @code{set_thread_cmd_list}.
 
-@subheading Generic Host Support Files
+To add commands in general, use @code{add_cmd}.  @code{add_com} adds to
+the main command list, and should be used for those commands.  The usual
+place to add commands is in the @code{_initialize_@var{xyz}} routines at the
+ends of most source files.
 
-There are some ``generic'' versions of routines that can be used by
-various systems.  These can be customized in various ways by macros
-defined in your @file{xm-@var{xxx}.h} file.  If these routines work for
-the @var{xxx} host, you can just include the generic file's name (with
-@samp{.o}, not @samp{.c}) in @code{XDEPFILES}.  
+@section Console Printing
 
-Otherwise, if your machine needs custom support routines, you will need
-to write routines that perform the same functions as the generic file.
-Put them into @code{@var{xxx}-xdep.c}, and put @code{@var{xxx}-xdep.o}
-into @code{XDEPFILES}.
+@section TUI
 
-@table @file
-@item ser-bsd.c
-This contains serial line support for Berkeley-derived Unix systems.
+@section libgdb
 
-@item ser-go32.c
-This contains serial line support for 32-bit programs running under DOS
-using the GO32 execution environment.
+@code{libgdb} was an abortive project of years ago.  The theory was to
+provide an API to GDB's functionality.
 
-@item ser-termios.c
-This contains serial line support for System V-derived Unix systems.
-@end table
+@node Symbol Handling
 
-Now, you are now ready to try configuring GDB to compile using your system
-as its host.  From the top level (above @file{bfd}, @file{gdb}, etc), do:
+@chapter Symbol Handling
 
-@example
-./configure @var{xxx} --target=vxworks960
-@end example
+Symbols are a key part of GDB's operation.  Symbols include variables,
+functions, and types.
 
-This will configure your system to cross-compile for VxWorks on
-the Intel 960, which is probably not what you really want, but it's
-a test case that works at this stage.  (You haven't set up to be
-able to debug programs that run @emph{on} @var{xxx} yet.)
+@section Symbol Reading
 
-If this succeeds, you can try building it all with:
+GDB reads symbols from ``symbol files''.  The usual symbol file is the
+file containing the program which GDB is debugging.  GDB can be directed
+to use a different file for symbols (with the @code{symbol-file}
+command), and it can also read more symbols via the ``add-file'' and
+``load'' commands, or while reading symbols from shared libraries.
 
-@example
-make
-@end example
+Symbol files are initially opened by code in @file{symfile.c} using the
+BFD library.  BFD identifies the type of the file by examining its
+header.  @code{symfile_init} then uses this identification to locate a
+set of symbol-reading functions.
 
-Repeat until the program configures, compiles, links, and runs.
-When run, it won't be able to do much (unless you have a VxWorks/960
-board on your network) but you will know that the host support is
-pretty well done.
+Symbol reading modules identify themselves to GDB by calling
+@code{add_symtab_fns} during their module initialization.  The argument
+to @code{add_symtab_fns} is a @code{struct sym_fns} which contains the
+name (or name prefix) of the symbol format, the length of the prefix,
+and pointers to four functions.  These functions are called at various
+times to process symbol-files whose identification matches the specified
+prefix.
 
-Good luck!  Comments and suggestions about this section are particularly
-welcome; send them to @samp{bug-gdb@@prep.ai.mit.edu}.
+The functions supplied by each module are:
 
-@node Native
-@chapter Adding a New Native Configuration
+@table @code
+@item @var{xyz}_symfile_init(struct sym_fns *sf)
 
-If you are making GDB run native on the @var{xxx} machine, you have
-plenty more work to do.  Several files control GDB's configuration for
-native support:
+Called from @code{symbol_file_add} when we are about to read a new
+symbol file.  This function should clean up any internal state (possibly
+resulting from half-read previous files, for example) and prepare to
+read a new symbol file. Note that the symbol file which we are reading
+might be a new "main" symbol file, or might be a secondary symbol file
+whose symbols are being added to the existing symbol table.
+
+The argument to @code{@var{xyz}_symfile_init} is a newly allocated
+@code{struct sym_fns} whose @code{bfd} field contains the BFD for the
+new symbol file being read.  Its @code{private} field has been zeroed,
+and can be modified as desired.  Typically, a struct of private
+information will be @code{malloc}'d, and a pointer to it will be placed
+in the @code{private} field.
+
+There is no result from @code{@var{xyz}_symfile_init}, but it can call
+@code{error} if it detects an unavoidable problem.
 
-@table @file
-@item gdb/config/@var{xarch}/@var{xxx}.mh
-Specifies Makefile fragments needed when hosting @emph{or native}
-on machine @var{xxx}.
-In particular, this lists the required native-dependent object files,
-by defining @samp{NATDEPFILES=@dots{}}.  Also
-specifies the header file which describes native support on @var{xxx},
-by defining @samp{NAT_FILE= nm-@var{xxx}.h}.
-You can also define @samp{NAT_CFLAGS},
-@samp{NAT_ADD_FILES}, @samp{NAT_CLIBS}, @samp{NAT_CDEPS},
-etc.; see @file{Makefile.in}.
+@item @var{xyz}_new_init()
 
-@item gdb/config/@var{arch}/nm-@var{xxx}.h
-(@file{nm.h} is a link to this file, created by configure).
-Contains C macro definitions describing the native system environment,
-such as child process control and core file support.
-Crib from existing @file{nm-*.h} files to create a new one.
+Called from @code{symbol_file_add} when discarding existing symbols.
+This function need only handle the symbol-reading module's internal
+state; the symbol table data structures visible to the rest of GDB will
+be discarded by @code{symbol_file_add}.  It has no arguments and no
+result.  It may be called after @code{@var{xyz}_symfile_init}, if a new
+symbol table is being read, or may be called alone if all symbols are
+simply being discarded.
+
+@item @var{xyz}_symfile_read(struct sym_fns *sf, CORE_ADDR addr, int mainline)
+
+Called from @code{symbol_file_add} to actually read the symbols from a
+symbol-file into a set of psymtabs or symtabs.
 
-@item gdb/@var{xxx}-nat.c
-Contains any miscellaneous C code required for this native support
-of this machine.  On some machines it doesn't exist at all.
+@code{sf} points to the struct sym_fns originally passed to
+@code{@var{xyz}_sym_init} for possible initialization.  @code{addr} is
+the offset between the file's specified start address and its true
+address in memory.  @code{mainline} is 1 if this is the main symbol
+table being read, and 0 if a secondary symbol file (e.g. shared library
+or dynamically loaded file) is being read.@refill
 @end table
 
-@subheading Generic Native Support Files
+In addition, if a symbol-reading module creates psymtabs when
+@var{xyz}_symfile_read is called, these psymtabs will contain a pointer
+to a function @code{@var{xyz}_psymtab_to_symtab}, which can be called
+from any point in the GDB symbol-handling code.
 
-There are some ``generic'' versions of routines that can be used by
-various systems.  These can be customized in various ways by macros
-defined in your @file{nm-@var{xxx}.h} file.  If these routines work for
-the @var{xxx} host, you can just include the generic file's name (with
-@samp{.o}, not @samp{.c}) in @code{NATDEPFILES}.  
+@table @code
+@item @var{xyz}_psymtab_to_symtab (struct partial_symtab *pst)
+
+Called from @code{psymtab_to_symtab} (or the PSYMTAB_TO_SYMTAB macro) if
+the psymtab has not already been read in and had its @code{pst->symtab}
+pointer set.  The argument is the psymtab to be fleshed-out into a
+symtab.  Upon return, pst->readin should have been set to 1, and
+pst->symtab should contain a pointer to the new corresponding symtab, or
+zero if there were no symbols in that part of the symbol file.
+@end table
 
-Otherwise, if your machine needs custom support routines, you will need
-to write routines that perform the same functions as the generic file.
-Put them into @code{@var{xxx}-nat.c}, and put @code{@var{xxx}-nat.o}
-into @code{NATDEPFILES}.  
+@section Partial Symbol Tables
 
-@table @file
+GDB has three types of symbol tables.
 
-@item inftarg.c
-This contains the @emph{target_ops vector} that supports Unix child
-processes on systems which use ptrace and wait to control the child.
+@itemize @bullet
 
-@item procfs.c
-This contains the @emph{target_ops vector} that supports Unix child
-processes on systems which use /proc to control the child.
+@item full symbol tables (symtabs).  These contain the main information
+about symbols and addresses.
 
-@item fork-child.c
-This does the low-level grunge that uses Unix system calls
-to do a "fork and exec" to start up a child process.
+@item partial symbol tables (psymtabs).  These contain enough
+information to know when to read the corresponding part of the full
+symbol table.
 
-@item infptrace.c
-This is the low level interface to inferior processes for systems
-using the Unix @code{ptrace} call in a vanilla way.
+@item minimal symbol tables (msymtabs).  These contain information
+gleaned from non-debugging symbols.
 
-@item core-aout.c::fetch_core_registers()
-Support for reading registers out of a core file.  This routine calls
-@code{register_addr()}, see below.
-Now that BFD is used to read core files, virtually all machines should
-use @code{core-aout.c}, and should just provide @code{fetch_core_registers} in
-@code{@var{xxx}-nat.c} (or @code{REGISTER_U_ADDR} in @code{nm-@var{xxx}.h}).
+@end itemize
 
-@item core-aout.c::register_addr()
-If your @code{nm-@var{xxx}.h} file defines the macro
-@code{REGISTER_U_ADDR(addr, blockend, regno)}, it should be defined to
-set @code{addr} to the offset within the @samp{user}
-struct of GDB register number @code{regno}.  @code{blockend} is the
-offset within the ``upage'' of @code{u.u_ar0}.
-If @code{REGISTER_U_ADDR} is defined,
-@file{core-aout.c} will define the @code{register_addr()} function and use
-the macro in it.  If you do not define @code{REGISTER_U_ADDR}, but you
-are using the standard @code{fetch_core_registers()}, you will need to
-define your own version of @code{register_addr()}, put it into your
-@code{@var{xxx}-nat.c} file, and be sure @code{@var{xxx}-nat.o} is in
-the @code{NATDEPFILES} list.  If you have your own
-@code{fetch_core_registers()}, you may not need a separate
-@code{register_addr()}.  Many custom @code{fetch_core_registers()}
-implementations simply locate the registers themselves.@refill
-@end table
+This section describes partial symbol tables.
 
-When making GDB run native on a new operating system,
-to make it possible to debug
-core files, you will need to either write specific code for parsing your
-OS's core files, or customize @file{bfd/trad-core.c}.  First, use
-whatever @code{#include} files your machine uses to define the struct of
-registers that is accessible (possibly in the u-area) in a core file
-(rather than @file{machine/reg.h}), and an include file that defines whatever
-header exists on a core file (e.g. the u-area or a @samp{struct core}).  Then
-modify @code{trad_unix_core_file_p()} to use these values to set up the
-section information for the data segment, stack segment, any other
-segments in the core file (perhaps shared library contents or control
-information), ``registers'' segment, and if there are two discontiguous
-sets of registers (e.g.  integer and float), the ``reg2'' segment.  This
-section information basically delimits areas in the core file in a
-standard way, which the section-reading routines in BFD know how to seek
-around in.
+A psymtab is constructed by doing a very quick pass over an executable
+file's debugging information.  Small amounts of information are
+extracted -- enough to identify which parts of the symbol table will
+need to be re-read and fully digested later, when the user needs the
+information.  The speed of this pass causes GDB to start up very
+quickly.  Later, as the detailed rereading occurs, it occurs in small
+pieces, at various times, and the delay therefrom is mostly invisible to
+the user.
+@c (@xref{Symbol Reading}.)
 
-Then back in GDB, you need a matching routine called
-@code{fetch_core_registers()}.  If you can use the generic one, it's in
-@file{core-aout.c}; if not, it's in your @file{@var{xxx}-nat.c} file.
-It will be passed a char pointer to the entire ``registers'' segment,
-its length, and a zero; or a char pointer to the entire ``regs2''
-segment, its length, and a 2.  The routine should suck out the supplied
-register values and install them into GDB's ``registers'' array.
-(@xref{New Architectures,,Defining a New Host or Target Architecture},
-for more info about this.)
+The symbols that show up in a file's psymtab should be, roughly, those
+visible to the debugger's user when the program is not running code from
+that file.  These include external symbols and types, static symbols and
+types, and enum values declared at file scope.
 
-If your system uses @file{/proc} to control processes, and uses ELF
-format core files, then you may be able to use the same routines
-for reading the registers out of processes and out of core files.
+The psymtab also contains the range of instruction addresses that the
+full symbol table would represent.
+
+The idea is that there are only two ways for the user (or much of the
+code in the debugger) to reference a symbol:
+
+@itemize @bullet
 
-@node Target
-@chapter Adding a New Target
+@item by its address
+(e.g. execution stops at some address which is inside a function in this
+file).  The address will be noticed to be in the range of this psymtab,
+and the full symtab will be read in.  @code{find_pc_function},
+@code{find_pc_line}, and other @code{find_pc_@dots{}} functions handle
+this.
 
-For a new target called @var{ttt}, first specify the configuration as
-described in @ref{Config,,Adding a New Configuration}.  If your new
-target is the same as your new host, you've probably already done that.
+@item by its name
+(e.g. the user asks to print a variable, or set a breakpoint on a
+function).  Global names and file-scope names will be found in the
+psymtab, which will cause the symtab to be pulled in.  Local names will
+have to be qualified by a global name, or a file-scope name, in which
+case we will have already read in the symtab as we evaluated the
+qualifier.  Or, a local symbol can be referenced when we are "in" a
+local scope, in which case the first case applies.  @code{lookup_symbol}
+does most of the work here.
 
-A variety of files specify attributes of the GDB target environment:
+@end itemize
 
-@table @file
-@item gdb/config/@var{arch}/@var{ttt}.mt
-Contains a Makefile fragment specific to this target.
-Specifies what object files are needed for target @var{ttt}, by
-defining @samp{TDEPFILES=@dots{}}.
-Also specifies the header file which describes @var{ttt}, by defining
-@samp{TM_FILE= tm-@var{ttt}.h}.  You can also define @samp{TM_CFLAGS},
-@samp{TM_CLIBS}, @samp{TM_CDEPS},
-and other Makefile variables here; see @file{Makefile.in}.
+The only reason that psymtabs exist is to cause a symtab to be read in
+at the right moment.  Any symbol that can be elided from a psymtab,
+while still causing that to happen, should not appear in it.  Since
+psymtabs don't have the idea of scope, you can't put local symbols in
+them anyway.  Psymtabs don't have the idea of the type of a symbol,
+either, so types need not appear, unless they will be referenced by
+name.
 
-@item gdb/config/@var{arch}/tm-@var{ttt}.h
-(@file{tm.h} is a link to this file, created by configure).
-Contains macro definitions about the target machine's
-registers, stack frame format and instructions.
-Crib from existing @file{tm-*.h} files when building a new one.
+It is a bug for GDB to behave one way when only a psymtab has been read,
+and another way if the corresponding symtab has been read in.  Such bugs
+are typically caused by a psymtab that does not contain all the visible
+symbols, or which has the wrong instruction address ranges.
 
-@item gdb/@var{ttt}-tdep.c
-Contains any miscellaneous code required for this target machine.
-On some machines it doesn't exist at all.  Sometimes the macros
-in @file{tm-@var{ttt}.h} become very complicated, so they are
-implemented as functions here instead, and the macro is simply
-defined to call the function.
-
-@item gdb/exec.c 
-Defines functions for accessing files that are
-executable on the target system.  These functions open and examine an
-exec file, extract data from one, write data to one, print information
-about one, etc.  Now that executable files are handled with BFD, every
-target should be able to use the generic exec.c rather than its
-own custom code.
-
-@item gdb/@var{arch}-pinsn.c
-Prints (disassembles) the target machine's instructions.
-This file is usually shared with other target machines which use the
-same processor, which is why it is @file{@var{arch}-pinsn.c} rather
-than @file{@var{ttt}-pinsn.c}.
-
-@item gdb/@var{arch}-opcode.h
-Contains some large initialized
-data structures describing the target machine's instructions.
-This is a bit strange for a @file{.h} file, but it's OK since
-it is only included in one place.  @file{@var{arch}-opcode.h} is shared
-between the debugger and the assembler, if the GNU assembler has been
-ported to the target machine.
+The psymtab for a particular section of a symbol-file (objfile) could be
+thrown away after the symtab has been read in.  The symtab should always
+be searched before the psymtab, so the psymtab will never be used (in a
+bug-free environment).  Currently, psymtabs are allocated on an obstack,
+and all the psymbols themselves are allocated in a pair of large arrays
+on an obstack, so there is little to be gained by trying to free them
+unless you want to do a lot more work.
 
-@item gdb/config/@var{arch}/tm-@var{arch}.h
-This often exists to describe the basic layout of the target machine's
-processor chip (registers, stack, etc).
-If used, it is included by @file{tm-@var{xxx}.h}.  It can
-be shared among many targets that use the same processor.
+@section Types
 
-@item gdb/@var{arch}-tdep.c
-Similarly, there are often common subroutines that are shared by all
-target machines that use this particular architecture.
-@end table
+Fundamental Types (e.g., FT_VOID, FT_BOOLEAN).
+
+These are the fundamental types that GDB uses internally.  Fundamental
+types from the various debugging formats (stabs, ELF, etc) are mapped
+into one of these.  They are basically a union of all fundamental types
+that gdb knows about for all the languages that GDB knows about.
+
+Type Codes (e.g., TYPE_CODE_PTR, TYPE_CODE_ARRAY).
+
+Each time GDB builds an internal type, it marks it with one of these
+types.  The type may be a fundamental type, such as TYPE_CODE_INT, or a
+derived type, such as TYPE_CODE_PTR which is a pointer to another type.
+Typically, several FT_* types map to one TYPE_CODE_* type, and are
+distinguished by other members of the type struct, such as whether the
+type is signed or unsigned, and how many bits it uses.
+
+Builtin Types (e.g., builtin_type_void, builtin_type_char).
+
+These are instances of type structs that roughly correspond to
+fundamental types and are created as global types for GDB to use for
+various ugly historical reasons.  We eventually want to eliminate these.
+Note for example that builtin_type_int initialized in gdbtypes.c is
+basically the same as a TYPE_CODE_INT type that is initialized in
+c-lang.c for an FT_INTEGER fundamental type.  The difference is that the
+builtin_type is not associated with any particular objfile, and only one
+instance exists, while c-lang.c builds as many TYPE_CODE_INT types as
+needed, with each one associated with some particular objfile.
+
+@section Object File Formats
+
+@subsection a.out
+
+The @file{a.out} format is the original file format for Unix.  It
+consists of three sections: text, data, and bss, which are for program
+code, initialized data, and uninitialized data, respectively.
+
+The @file{a.out} format is so simple that it doesn't have any reserved
+place for debugging information.  (Hey, the original Unix hackers used
+@file{adb}, which is a machine-language debugger.)  The only debugging
+format for @file{a.out} is stabs, which for this format are encoded as
+symbols with distinctive properties.
+
+@subsection COFF
+
+The COFF format was introduced with System V Release 3 (SVR3) Unix.
+COFF files may have multiple sections, each prefixed by a header.  The
+number of sections is limited.
+
+The COFF specification includes support for debugging.  Although this
+was a step forward, the debugging information was woefully limited.  For
+instance, it was not possible to represent code that came from an
+included file.
 
-When adding support for a new target machine, there are various areas
-of support that might need change, or might be OK.
+@subsection ECOFF
 
-If you are using an existing object file format (a.out or COFF), 
-there is probably little to be done.  See @file{bfd/doc/bfd.texinfo}
-for more information on writing new a.out or COFF versions.
+@subsection XCOFF
+
+The IBM RS/6000 running AIX uses an object file format called XCOFF.
+The COFF sections, symbols, and line numbers are used, but debugging
+symbols are dbx-style stabs whose strings are located in the
+@samp{.debug} section (rather than the string table).  For more
+information, see @xref{Top,,,stabs,The Stabs Debugging Format}.
+
+The shared library scheme has a nice clean interface for figuring out
+what shared libraries are in use, but the catch is that everything which
+refers to addresses (symbol tables and breakpoints at least) needs to be
+relocated for both shared libraries and the main executable.  At least
+using the standard mechanism this can only be done once the program has
+been run (or the core file has been read).
+
+@subsection PE
+
+Windows 95 and NT use the PE (Portable Executable) format for their
+executables.  PE is basically COFF with an additional header or two.
+
+@subsection ELF
+
+The ELF format came with System V Release 4 (SVR4) Unix.  ELF is similar
+to COFF in being organized into a number of sections, but it removes
+many of COFF's limitations.
+
+@subsection SOM
+
+@section Debugging File Formats
+
+@subsection stabs
+
+@subsection COFF
+
+@subsection DWARF 1
+
+@subsection DWARF 2
+
+@subsection SOM
+
+@section Adding a New Symbol Reader to GDB
+
+If you are using an existing object file format (a.out, COFF, ELF, etc),
+there is probably little to be done.
 
 If you need to add a new object file format, you must first add it to
-BFD.  This is beyond the scope of this document right now.  Basically
-you must build a transfer vector (of type @code{bfd_target}), which will
-mean writing all the required routines, and add it to the list in
-@file{bfd/targets.c}.
+BFD.  This is beyond the scope of this document.
 
 You must then arrange for the BFD code to provide access to the
 debugging symbols.  Generally GDB will have to call swapping routines
@@ -680,34 +631,37 @@ to call swapping routines, since the external data structures on various
 platforms have different sizes and layouts.  Specialized routines that
 will only ever be implemented by one object file format may be called
 directly.  This interface should be described in a file
-@file{bfd/libxxx.h}, which is included by GDB.
+@file{bfd/libxyz.h}, which is included by GDB.
 
-If you are adding a new operating system for an existing CPU chip, add a
-@file{tm-@var{xos}.h} file that describes the operating system
-facilities that are unusual (extra symbol table info; the breakpoint
-instruction needed; etc).  Then write a
-@file{tm-@var{xarch}-@var{xos}.h} that just @code{#include}s
-@file{tm-@var{xarch}.h} and @file{tm-@var{xos}.h}.  (Now that we have
-three-part configuration names, this will probably get revised to
-separate the @var{xos} configuration from the @var{xarch}
-configuration.)
 
+@node Language Support
+
+@chapter Language Support
+
+GDB's language support is mainly driven by the symbol reader, although
+it is possible for the user to set the source language manually.
 
-@node Languages
-@chapter Adding a Source Language to GDB
+GDB chooses the source language by looking at the extension of the file
+recorded in the debug info; @code{.c} means C, @code{.f} means Fortran,
+etc.  It may also use a special-purpose language identifier if the debug
+format supports it, such as DWARF.
 
-To add other languages to GDB's expression parser, follow the following steps:
+@section Adding a Source Language to GDB
+
+To add other languages to GDB's expression parser, follow the following
+steps:
 
 @table @emph
 @item Create the expression parser.
 
-This should reside in a file @file{@var{lang}-exp.y}.  Routines for building
-parsed expressions into a @samp{union exp_element} list are in @file{parse.c}.
+This should reside in a file @file{@var{lang}-exp.y}.  Routines for
+building parsed expressions into a @samp{union exp_element} list are in
+@file{parse.c}.
 
 Since we can't depend upon everyone having Bison, and YACC produces
 parsers that define a bunch of global names, the following lines
-@emph{must} be included at the top of the YACC parser, to prevent
-the various parsers from defining the same global names:
+@emph{must} be included at the top of the YACC parser, to prevent the
+various parsers from defining the same global names:
 
 @example
 #define yyparse 	@var{lang}_parse
@@ -752,9 +706,9 @@ the number of @code{exp_element}s that a given operation takes up.
 Add an enumerated identifier for your language to the enumerated type
 @code{enum language} in @file{defs.h}.
 
-Update the routines in @file{language.c} so your language is included.  These
-routines include type predicates and such, which (in some cases) are
-language dependent.  If your language does not appear in the switch
+Update the routines in @file{language.c} so your language is included.
+These routines include type predicates and such, which (in some cases)
+are language dependent.  If your language does not appear in the switch
 statement, an error is reported.
 
 Also included in @file{language.c} is the code that updates the variable
@@ -762,9 +716,9 @@ Also included in @file{language.c} is the code that updates the variable
 @code{language_@var{lang}} enumerated identifier into a printable
 string.
 
-Update the function @code{_initialize_language} to include your language.  This
-function picks the default language upon startup, so is dependent upon
-which languages that GDB is built for.
+Update the function @code{_initialize_language} to include your
+language.  This function picks the default language upon startup, so is
+dependent upon which languages that GDB is built for.
 
 Update @code{allocate_symtab} in @file{symfile.c} and/or symbol-reading
 code so that the language of each symtab (source file) is set properly.
@@ -805,688 +759,80 @@ Add dependencies in @file{Makefile.in}.  Make sure you update the macro
 variables such as @code{HFILES} and @code{OBJS}, otherwise your code may
 not get linked in, or, worse yet, it may not get @code{tar}red into the
 distribution!
-@end table
-
-
-@node Releases
-@chapter Configuring GDB for Release
-
-From the top level directory (containing @file{gdb}, @file{bfd},
-@file{libiberty}, and so on):
-@example
-make -f Makefile.in gdb.tar.gz
-@end example
 
-This will properly configure, clean, rebuild any files that are
-distributed pre-built (e.g. @file{c-exp.tab.c} or @file{refcard.ps}),
-and will then make a tarfile.  (If the top level directory has already
-been configured, you can just do @code{make gdb.tar.gz} instead.)
-
-This procedure requires:
-@itemize @bullet
-@item symbolic links
-@item @code{makeinfo} (texinfo2 level)
-@item @TeX{}
-@item @code{dvips}
-@item @code{yacc} or @code{bison}
-@end itemize
-@noindent
-@dots{} and the usual slew of utilities (@code{sed}, @code{tar}, etc.).
-
-@subheading TEMPORARY RELEASE PROCEDURE FOR DOCUMENTATION
-
-@file{gdb.texinfo} is currently marked up using the texinfo-2 macros,
-which are not yet a default for anything (but we have to start using
-them sometime).  
-
-For making paper, the only thing this implies is the right generation of
-@file{texinfo.tex} needs to be included in the distribution.
-
-For making info files, however, rather than duplicating the texinfo2
-distribution, generate @file{gdb-all.texinfo} locally, and include the files
-@file{gdb.info*} in the distribution.  Note the plural; @code{makeinfo} will
-split the document into one overall file and five or so included files.
-
-
-@node Partial Symbol Tables
-@chapter Partial Symbol Tables
-
-GDB has three types of symbol tables.
-
-@itemize @bullet
-@item	full symbol tables (symtabs).  These contain the main
-information about symbols and addresses.
-@item	partial symbol tables (psymtabs).  These contain enough
-information to know when to read the corresponding
-part of the full symbol table.
-@item	minimal symbol tables (msymtabs).  These contain information
-gleaned from non-debugging symbols.
-@end itemize
-
-This section describes partial symbol tables.
-
-A psymtab is constructed by doing a very quick pass over an executable
-file's debugging information.  Small amounts of information are
-extracted -- enough to identify which parts of the symbol table will
-need to be re-read and fully digested later, when the user needs the
-information.  The speed of this pass causes GDB to start up very
-quickly.  Later, as the detailed rereading occurs, it occurs in small
-pieces, at various times, and the delay therefrom is mostly invisible to
-the user.  (@xref{Symbol Reading}.)
-
-The symbols that show up in a file's psymtab should be, roughly, those
-visible to the debugger's user when the program is not running code from
-that file.  These include external symbols and types, static
-symbols and types, and enum values declared at file scope.
-
-The psymtab also contains the range of instruction addresses that the
-full symbol table would represent.
-
-The idea is that there are only two ways for the user (or much of
-the code in the debugger) to reference a symbol:
-
-@itemize @bullet
-
-@item by its address
-(e.g. execution stops at some address which is inside a function
-in this file).  The address will be noticed to be in the
-range of this psymtab, and the full symtab will be read in.
-@code{find_pc_function}, @code{find_pc_line}, and other @code{find_pc_@dots{}}
-functions handle this.
-
-@item by its name
-(e.g. the user asks to print a variable, or set a breakpoint on a
-function).  Global names and file-scope names will be found in the
-psymtab, which will cause the symtab to be pulled in.  Local names will
-have to be qualified by a global name, or a file-scope name, in which
-case we will have already read in the symtab as we evaluated the
-qualifier.  Or, a local symbol can be referenced when
-we are "in" a local scope, in which case the first case applies.
-@code{lookup_symbol} does most of the work here.
-
-@end itemize
-
-The only reason that psymtabs exist is to cause a symtab to be read in
-at the right moment.  Any symbol that can be elided from a psymtab,
-while still causing that to happen, should not appear in it.  Since
-psymtabs don't have the idea of scope, you can't put local symbols in
-them anyway.  Psymtabs don't have the idea of the type of a symbol,
-either, so types need not appear, unless they will be referenced by
-name.
-
-It is a bug for GDB to behave one way when only a psymtab has been read,
-and another way if the corresponding symtab has been read in.  Such
-bugs are typically caused by a psymtab that does not contain all the
-visible symbols, or which has the wrong instruction address ranges.
-
-The psymtab for a particular section of a symbol-file (objfile)
-could be thrown away after the symtab has been read in.  The symtab
-should always be searched before the psymtab, so the psymtab will
-never be used (in a bug-free environment).  Currently,
-psymtabs are allocated on an obstack, and all the psymbols themselves
-are allocated in a pair of large arrays on an obstack, so there is
-little to be gained by trying to free them unless you want to do a lot
-more work.
-
-@node Types
-@chapter Types
-
-Fundamental Types (e.g., FT_VOID, FT_BOOLEAN).
-
-These are the fundamental types that GDB uses internally.  Fundamental
-types from the various debugging formats (stabs, ELF, etc) are mapped into
-one of these.  They are basically a union of all fundamental types that
-gdb knows about for all the languages that GDB knows about.
-
-Type Codes (e.g., TYPE_CODE_PTR, TYPE_CODE_ARRAY).
-
-Each time GDB builds an internal type, it marks it with one of these
-types.  The type may be a fundamental type, such as TYPE_CODE_INT, or
-a derived type, such as TYPE_CODE_PTR which is a pointer to another
-type.  Typically, several FT_* types map to one TYPE_CODE_* type, and
-are distinguished by other members of the type struct, such as whether
-the type is signed or unsigned, and how many bits it uses.
-
-Builtin Types (e.g., builtin_type_void, builtin_type_char).
-
-These are instances of type structs that roughly correspond to fundamental
-types and are created as global types for GDB to use for various ugly
-historical reasons.  We eventually want to eliminate these.  Note for
-example that builtin_type_int initialized in gdbtypes.c is basically the
-same as a TYPE_CODE_INT type that is initialized in c-lang.c for an
-FT_INTEGER fundamental type.  The difference is that the builtin_type is
-not associated with any particular objfile, and only one instance exists,
-while c-lang.c builds as many TYPE_CODE_INT types as needed, with each
-one associated with some particular objfile.
-
-@node BFD support for GDB
-@chapter Binary File Descriptor Library Support for GDB
-
-BFD provides support for GDB in several ways:
-
-@table @emph
-@item	identifying executable and core files
-BFD will identify a variety of file types, including a.out, coff, and
-several variants thereof, as well as several kinds of core files.
-
-@item	access to sections of files
-BFD parses the file headers to determine the names, virtual addresses,
-sizes, and file locations of all the various named sections in files
-(such as the text section or the data section).  GDB simply calls
-BFD to read or write section X at byte offset Y for length Z.
-
-@item	specialized core file support
-BFD provides routines to determine the failing command name stored
-in a core file, the signal with which the program failed, and whether
-a core file matches (i.e. could be a core dump of) a particular executable
-file.
-
-@item	locating the symbol information
-GDB uses an internal interface of BFD to determine where to find the
-symbol information in an executable file or symbol-file.  GDB itself
-handles the reading of symbols, since BFD does not ``understand'' debug
-symbols, but GDB uses BFD's cached information to find the symbols,
-string table, etc.
 @end table
 
-@c The interface for symbol reading is described in @ref{Symbol
-@c Reading,,Symbol Reading}.
-
-
-@node Symbol Reading
-@chapter Symbol Reading
-
-GDB reads symbols from "symbol files".  The usual symbol file is the
-file containing the program which GDB is debugging.  GDB can be directed
-to use a different file for symbols (with the ``symbol-file''
-command), and it can also read more symbols via the ``add-file'' and ``load''
-commands, or while reading symbols from shared libraries.
-
-Symbol files are initially opened by @file{symfile.c} using the BFD
-library.  BFD identifies the type of the file by examining its header.
-@code{symfile_init} then uses this identification to locate a
-set of symbol-reading functions.
-
-Symbol reading modules identify themselves to GDB by calling
-@code{add_symtab_fns} during their module initialization.  The argument
-to @code{add_symtab_fns} is a @code{struct sym_fns} which contains
-the name (or name prefix) of the symbol format, the length of the prefix,
-and pointers to four functions.  These functions are called at various
-times to process symbol-files whose identification matches the specified
-prefix.
-
-The functions supplied by each module are:
-
-@table @code
-@item @var{xxx}_symfile_init(struct sym_fns *sf)
-
-Called from @code{symbol_file_add} when we are about to read a new
-symbol file.  This function should clean up any internal state
-(possibly resulting from half-read previous files, for example)
-and prepare to read a new symbol file. Note that the symbol file
-which we are reading might be a new "main" symbol file, or might
-be a secondary symbol file whose symbols are being added to the
-existing symbol table.
-
-The argument to @code{@var{xxx}_symfile_init} is a newly allocated
-@code{struct sym_fns} whose @code{bfd} field contains the BFD
-for the new symbol file being read.  Its @code{private} field
-has been zeroed, and can be modified as desired.  Typically,
-a struct of private information will be @code{malloc}'d, and
-a pointer to it will be placed in the @code{private} field.
-
-There is no result from @code{@var{xxx}_symfile_init}, but it can call
-@code{error} if it detects an unavoidable problem.
-
-@item @var{xxx}_new_init()
-
-Called from @code{symbol_file_add} when discarding existing symbols.
-This function need only handle 
-the symbol-reading module's internal state; the symbol table data
-structures visible to the rest of GDB will be discarded by
-@code{symbol_file_add}.  It has no arguments and no result.
-It may be called after @code{@var{xxx}_symfile_init}, if a new symbol
-table is being read, or may be called alone if all symbols are
-simply being discarded.
-
-@item @var{xxx}_symfile_read(struct sym_fns *sf, CORE_ADDR addr, int mainline)
 
-Called from @code{symbol_file_add} to actually read the symbols from a
-symbol-file into a set of psymtabs or symtabs.
+@node Host Definition
 
-@code{sf} points to the struct sym_fns originally passed to
-@code{@var{xxx}_sym_init} for possible initialization.  @code{addr} is the
-offset between the file's specified start address and its true address
-in memory.  @code{mainline} is 1 if this is the main symbol table being
-read, and 0 if a secondary symbol file (e.g. shared library or
-dynamically loaded file) is being read.@refill
-@end table
+@chapter Host Definition
 
-In addition, if a symbol-reading module creates psymtabs when
-@var{xxx}_symfile_read is called, these psymtabs will contain a pointer to
-a function @code{@var{xxx}_psymtab_to_symtab}, which can be called from
-any point in the GDB symbol-handling code.
-
-@table @code
-@item @var{xxx}_psymtab_to_symtab (struct partial_symtab *pst)
-
-Called from @code{psymtab_to_symtab} (or the PSYMTAB_TO_SYMTAB
-macro) if the psymtab has not already been read in and had its
-@code{pst->symtab} pointer set.  The argument is the psymtab
-to be fleshed-out into a symtab.  Upon return, pst->readin
-should have been set to 1, and pst->symtab should contain a
-pointer to the new corresponding symtab, or zero if there
-were no symbols in that part of the symbol file.
-@end table
+With the advent of autoconf, it's rarely necessary to have host
+definition machinery anymore.
 
+@section Adding a New Host
 
-@node Cleanups
-@chapter Cleanups
-
-Cleanups are a structured way to deal with things that need to be done
-later.  When your code does something (like @code{malloc} some memory, or open
-a file) that needs to be undone later (e.g. free the memory or close
-the file), it can make a cleanup.  The cleanup will be done at some
-future point:  when the command is finished, when an error occurs, or
-when your code decides it's time to do cleanups.
-
-You can also discard cleanups, that is, throw them away without doing
-what they say.  This is only done if you ask that it be done.
-
-Syntax:
-
-@table @code
-@item struct cleanup *@var{old_chain};
-Declare a variable which will hold a cleanup chain handle.
-
-@item @var{old_chain} = make_cleanup (@var{function}, @var{arg});
-Make a cleanup which will cause @var{function} to be called with @var{arg}
-(a @code{char *}) later.  The result, @var{old_chain}, is a handle that can be
-passed to @code{do_cleanups} or @code{discard_cleanups} later.  Unless you are
-going to call @code{do_cleanups} or @code{discard_cleanups} yourself,
-you can ignore the result from @code{make_cleanup}.
-
-
-@item do_cleanups (@var{old_chain});
-Perform all cleanups done since @code{make_cleanup} returned @var{old_chain}.
-E.g.:   
-@example
-make_cleanup (a, 0); 
-old = make_cleanup (b, 0); 
-do_cleanups (old);
-@end example
-@noindent
-will call @code{b()} but will not call @code{a()}.  The cleanup that calls @code{a()} will remain
-in the cleanup chain, and will be done later unless otherwise discarded.@refill
-
-@item discard_cleanups (@var{old_chain});
-Same as @code{do_cleanups} except that it just removes the cleanups from the
-chain and does not call the specified functions.
-
-@end table
-
-Some functions, e.g. @code{fputs_filtered()} or @code{error()}, specify that they
-``should not be called when cleanups are not in place''.  This means
-that any actions you need to reverse in the case of an error or
-interruption must be on the cleanup chain before you call these functions,
-since they might never return to your code (they @samp{longjmp} instead).
-
-
-@node Wrapping
-@chapter Wrapping Output Lines
-
-Output that goes through @code{printf_filtered} or @code{fputs_filtered} or
-@code{fputs_demangled} needs only to have calls to @code{wrap_here} added 
-in places that would be good breaking points.  The utility routines
-will take care of actually wrapping if the line width is exceeded.
-
-The argument to @code{wrap_here} is an indentation string which is printed
-@emph{only} if the line breaks there.  This argument is saved away and used
-later.  It must remain valid until the next call to @code{wrap_here} or
-until a newline has been printed through the @code{*_filtered} functions.
-Don't pass in a local variable and then return!
-
-It is usually best to call @code{wrap_here()} after printing a comma or space.
-If you call it before printing a space, make sure that your indentation
-properly accounts for the leading space that will print if the line wraps
-there.
-
-Any function or set of functions that produce filtered output must finish
-by printing a newline, to flush the wrap buffer, before switching to
-unfiltered (``@code{printf}'') output.  Symbol reading routines that print
-warnings are a good example.
+Most of GDB's host configuration support happens via autoconf.  It
+should be rare to need new host-specific definitions.  GDB still uses
+the host-specific definitions and files listed below, but these mostly
+exist for historical reasons, and should eventually disappear.
 
+Several files control GDB's configuration for host systems:
 
-@node Frames
-@chapter Frames
+@table @file
 
-A frame is a construct that GDB uses to keep track of calling and called
-functions.
+@item gdb/config/@var{arch}/@var{xyz}.mh
+Specifies Makefile fragments needed when hosting on machine @var{xyz}.
+In particular, this lists the required machine-dependent object files,
+by defining @samp{XDEPFILES=@dots{}}.  Also specifies the header file
+which describes host @var{xyz}, by defining @code{XM_FILE=
+xm-@var{xyz}.h}.  You can also define @code{CC}, @code{SYSV_DEFINE},
+@code{XM_CFLAGS}, @code{XM_ADD_FILES}, @code{XM_CLIBS}, @code{XM_CDEPS},
+etc.; see @file{Makefile.in}.
 
-@table @code
-@item FRAME_FP
-in the machine description has no meaning to the machine-independent
-part of GDB, except that it is used when setting up a new frame from
-scratch, as follows:
+@item gdb/config/@var{arch}/xm-@var{xyz}.h
+(@file{xm.h} is a link to this file, created by configure).  Contains C
+macro definitions describing the host system environment, such as byte
+order, host C compiler and library.
 
-@example
-      create_new_frame (read_register (FP_REGNUM), read_pc ()));
-@end example
+@item gdb/@var{xyz}-xdep.c
+Contains any miscellaneous C code required for this machine as a host.
+On most machines it doesn't exist at all.  If it does exist, put
+@file{@var{xyz}-xdep.o} into the @code{XDEPFILES} line in
+@file{gdb/config/@var{arch}/@var{xyz}.mh}.
 
-Other than that, all the meaning imparted to @code{FP_REGNUM} is imparted by
-the machine-dependent code.  So, @code{FP_REGNUM} can have any value that
-is convenient for the code that creates new frames.  (@code{create_new_frame}
-calls @code{INIT_EXTRA_FRAME_INFO} if it is defined; that is where you should
-use the @code{FP_REGNUM} value, if your frames are nonstandard.)
-
-@item FRAME_CHAIN
-Given a GDB frame, determine the address of the calling function's
-frame.  This will be used to create a new GDB frame struct, and then
-@code{INIT_EXTRA_FRAME_INFO} and @code{INIT_FRAME_PC} will be called for
-the new frame.
 @end table
 
-@node Remote Stubs
-@chapter Remote Stubs
-
-GDB's file @file{remote.c} talks a serial protocol to code that runs
-in the target system.  GDB provides several sample ``stubs'' that can
-be integrated into target programs or operating systems for this purpose;
-they are named @file{*-stub.c}.
-
-The GDB user's manual describes how to put such a stub into your target
-code.  What follows is a discussion of integrating the SPARC stub
-into a complicated operating system (rather than a simple program),
-by Stu Grossman, the author of this stub.
-
-The trap handling code in the stub assumes the following upon entry to
-trap_low:
-
-@enumerate
-@item %l1 and %l2 contain pc and npc respectively at the time of the trap
-@item traps are disabled
-@item you are in the correct trap window
-@end enumerate
-
-As long as your trap handler can guarantee those conditions, then there is no
-reason why you shouldn't be able to `share' traps with the stub.  The stub has
-no requirement that it be jumped to directly from the hardware trap vector.
-That is why it calls @code{exceptionHandler()}, which is provided by the external
-environment.  For instance, this could setup the hardware traps to actually
-execute code which calls the stub first, and then transfers to its own trap
-handler.
-
-For the most point, there probably won't be much of an issue with `sharing'
-traps, as the traps we use are usually not used by the kernel, and often
-indicate unrecoverable error conditions.  Anyway, this is all controlled by a
-table, and is trivial to modify.
-The most important trap for us is for @code{ta 1}.  Without that, we
-can't single step or do breakpoints.  Everything else is unnecessary
-for the proper operation of the debugger/stub.
-
-From reading the stub, it's probably not obvious how breakpoints work.  They
-are simply done by deposit/examine operations from GDB.
-
-@node Longjmp Support
-@chapter Longjmp Support
-
-GDB has support for figuring out that the target is doing a
-@code{longjmp} and for stopping at the target of the jump, if we are
-stepping.  This is done with a few specialized internal breakpoints,
-which are visible in the @code{maint info breakpoint} command.
-
-To make this work, you need to define a macro called
-@code{GET_LONGJMP_TARGET}, which will examine the @code{jmp_buf}
-structure and extract the longjmp target address.  Since @code{jmp_buf}
-is target specific, you will need to define it in the appropriate
-@file{tm-xxx.h} file.  Look in @file{tm-sun4os4.h} and
-@file{sparc-tdep.c} for examples of how to do this.
-
-@node Coding Style
-@chapter Coding Style
-
-GDB is generally written using the GNU coding standards, as described in
-@file{standards.texi}, which is available for anonymous FTP from GNU
-archive sites.  There are some additional considerations for GDB
-maintainers that reflect the unique environment and style of GDB
-maintenance.  If you follow these guidelines, GDB will be more
-consistent and easier to maintain.
-
-GDB's policy on the use of prototypes is that prototypes are used
-to @emph{declare} functions but never to @emph{define} them.  Simple
-macros are used in the declarations, so that a non-ANSI compiler can
-compile GDB without trouble.  The simple macro calls are used like
-this:
-
-@example @code
-extern int
-memory_remove_breakpoint PARAMS ((CORE_ADDR, char *));
-@end example
-
-Note the double parentheses around the parameter types.  This allows
-an arbitrary number of parameters to be described, without freaking
-out the C preprocessor.  When the function has no parameters, it
-should be described like:
-
-@example @code
-void
-noprocess PARAMS ((void));
-@end example
-
-The @code{PARAMS} macro expands to its argument in ANSI C, or to a simple
-@code{()} in traditional C.
-
-All external functions should have a @code{PARAMS} declaration in a
-header file that callers include.  All static functions should have such
-a declaration near the top of their source file.
-
-We don't have a gcc option that will properly check that these rules
-have been followed, but it's GDB policy, and we periodically check it
-using the tools available (plus manual labor), and clean up any remnants.
-
-@node Clean Design
-@chapter Clean Design
-
-In addition to getting the syntax right, there's the little question of
-semantics.  Some things are done in certain ways in GDB because long
-experience has shown that the more obvious ways caused various kinds of
-trouble.  In particular:
-
-@table @bullet
-@item
-You can't assume the byte order of anything that comes from a
-target (including @var{value}s, object files, and instructions).  Such
-things must be byte-swapped using @code{SWAP_TARGET_AND_HOST} in GDB,
-or one of the swap routines defined in @file{bfd.h}, such as @code{bfd_get_32}.
-
-@item
-You can't assume that you know what interface is being used to talk to
-the target system.  All references to the target must go through the
-current @code{target_ops} vector.
-
-@item
-You can't assume that the host and target machines are the same machine
-(except in the ``native'' support modules).
-In particular, you can't assume that the target machine's header files
-will be available on the host machine.  Target code must bring along its
-own header files -- written from scratch or explicitly donated by their
-owner, to avoid copyright problems.
-
-@item
-Insertion of new @code{#ifdef}'s will be frowned upon.  It's much better
-to write the code portably than to conditionalize it for various systems.
-
-@item
-New @code{#ifdef}'s which test for specific compilers or manufacturers
-or operating systems are unacceptable.  All @code{#ifdef}'s should test
-for features.  The information about which configurations contain which
-features should be segregated into the configuration files.  Experience
-has proven far too often that a feature unique to one particular system
-often creeps into other systems; and that a conditional based on 
-some predefined macro for your current system will become worthless
-over time, as new versions of your system come out that behave differently
-with regard to this feature.
-
-@item
-Adding code that handles specific architectures, operating systems, target
-interfaces, or hosts, is not acceptable in generic code.  If a hook
-is needed at that point, invent a generic hook and define it for your
-configuration, with something like:
-
-@example
-#ifdef	WRANGLE_SIGNALS
-   WRANGLE_SIGNALS (signo);
-#endif
-@end example
-
-In your host, target, or native configuration file, as appropriate, 
-define @code{WRANGLE_SIGNALS} to do the machine-dependent thing.  Take
-a bit of care in defining the hook, so that it can be used by other
-ports in the future, if they need a hook in the same place.
-
-If the hook is not defined, the code should do whatever "most" machines
-want.  Using @code{#ifdef}, as above, is the preferred way to do this,
-but sometimes that gets convoluted, in which case use
-
-@example
-#ifndef SPECIAL_FOO_HANDLING
-#define SPECIAL_FOO_HANDLING(pc, sp) (0)
-#endif
-@end example
-
-where the macro is used or in an appropriate header file.
-
-Whether to include a @dfn{small} hook, a hook around the exact pieces of
-code which are system-dependent, or whether to replace a whole function
-with a hook depends on the case.  A good example of this dilemma can be
-found in @code{get_saved_register}.  All machines that GDB 2.8 ran on
-just needed the @code{FRAME_FIND_SAVED_REGS} hook to find the saved
-registers.  Then the SPARC and Pyramid came along, and
-@code{HAVE_REGISTER_WINDOWS} and @code{REGISTER_IN_WINDOW_P} were
-introduced.  Then the 29k and 88k required the @code{GET_SAVED_REGISTER}
-hook.  The first three are examples of small hooks; the latter replaces
-a whole function.  In this specific case, it is useful to have both
-kinds; it would be a bad idea to replace all the uses of the small hooks
-with @code{GET_SAVED_REGISTER}, since that would result in much
-duplicated code.  Other times, duplicating a few lines of code here or
-there is much cleaner than introducing a large number of small hooks.
-
-Another way to generalize GDB along a particular interface is with an
-attribute struct.  For example, GDB has been generalized to handle
-multiple kinds of remote interfaces -- not by #ifdef's everywhere, but
-by defining the "target_ops" structure and having a current target (as
-well as a stack of targets below it, for memory references).  Whenever
-something needs to be done that depends on which remote interface we are
-using, a flag in the current target_ops structure is tested (e.g.
-`target_has_stack'), or a function is called through a pointer in the
-current target_ops structure.  In this way, when a new remote interface
-is added, only one module needs to be touched -- the one that actually
-implements the new remote interface.  Other examples of
-attribute-structs are BFD access to multiple kinds of object file
-formats, or GDB's access to multiple source languages.
-
-Please avoid duplicating code.  For example, in GDB 3.x all the code
-interfacing between @code{ptrace} and the rest of GDB was duplicated in
-@file{*-dep.c}, and so changing something was very painful.  In GDB 4.x,
-these have all been consolidated into @file{infptrace.c}.
-@file{infptrace.c} can deal with variations between systems the same way
-any system-independent file would (hooks, #if defined, etc.), and
-machines which are radically different don't need to use infptrace.c at
-all.
+@subheading Generic Host Support Files
 
-@item
-@emph{Do} write code that doesn't depend on the sizes of C data types,
-the format of the host's floating point numbers, the alignment of anything,
-or the order of evaluation of expressions.  In short, follow good 
-programming practices for writing portable C code.
+There are some ``generic'' versions of routines that can be used by
+various systems.  These can be customized in various ways by macros
+defined in your @file{xm-@var{xyz}.h} file.  If these routines work for
+the @var{xyz} host, you can just include the generic file's name (with
+@samp{.o}, not @samp{.c}) in @code{XDEPFILES}.
 
-@end table
+Otherwise, if your machine needs custom support routines, you will need
+to write routines that perform the same functions as the generic file.
+Put them into @code{@var{xyz}-xdep.c}, and put @code{@var{xyz}-xdep.o}
+into @code{XDEPFILES}.
 
-@node Submitting Patches
-@chapter Submitting Patches
+@table @file
 
-Thanks for thinking of offering your changes back to the community of
-GDB users.  In general we like to get well designed enhancements.
-Thanks also for checking in advance about the best way to transfer the
-changes.
+@item ser-unix.c
+This contains serial line support for Unix systems.  This is always
+included, via the makefile variable @code{SER_HARDWIRE}; override this
+variable in the @file{.mh} file to avoid it.
 
-The two main problems with getting your patches in are,
+@item ser-go32.c
+This contains serial line support for 32-bit programs running under DOS,
+using the GO32 execution environment.
 
-@table @bullet
-@item
-The GDB maintainers will only install ``cleanly designed'' patches.
-You may not always agree on what is clean design.
-@pxref{Coding Style}, @pxref{Clean Design}.
+@item ser-tcp.c
+This contains generic TCP support using sockets.
 
-@item
-If the maintainers don't have time to put the patch in when it
-arrives, or if there is any question about a patch, it
-goes into a large queue with everyone else's patches and
-bug reports.
 @end table
 
-I don't know how to get past these problems except by continuing to try.
-
-There are two issues here -- technical and legal.
-
-The legal issue is that to incorporate substantial changes requires a
-copyright assignment from you and/or your employer, granting ownership
-of the changes to the Free Software Foundation.  You can get the
-standard document for doing this by sending mail to
-@code{gnu@@prep.ai.mit.edu} and asking for it.  I recommend that people
-write in "All programs owned by the Free Software Foundation" as "NAME
-OF PROGRAM", so that changes in many programs (not just GDB, but GAS,
-Emacs, GCC, etc) can be contributed with only one piece of legalese
-pushed through the bureacracy and filed with the FSF.  I can't start
-merging changes until this paperwork is received by the FSF (their
-rules, which I follow since I maintain it for them).
-
-Technically, the easiest way to receive changes is to receive each
-feature as a small context diff or unidiff, suitable for "patch".
-Each message sent to me should include the changes to C code and
-header files for a single feature, plus ChangeLog entries for each
-directory where files were modified, and diffs for any changes needed
-to the manuals (gdb/doc/gdb.texi or gdb/doc/gdbint.texi).  If there
-are a lot of changes for a single feature, they can be split down
-into multiple messages.
-
-In this way, if I read and like the feature, I can add it to the
-sources with a single patch command, do some testing, and check it in.
-If you leave out the ChangeLog, I have to write one.  If you leave
-out the doc, I have to puzzle out what needs documenting.  Etc.
-
-The reason to send each change in a separate message is that I will
-not install some of the changes.  They'll be returned to you with
-questions or comments.  If I'm doing my job, my message back to you
-will say what you have to fix in order to make the change acceptable.
-The reason to have separate messages for separate features is so
-that other changes (which I @emph{am} willing to accept) can be installed
-while one or more changes are being reworked.  If multiple features
-are sent in a single message, I tend to not put in the effort to sort
-out the acceptable changes from the unacceptable, so none of the
-features get installed until all are acceptable.
-
-If this sounds painful or authoritarian, well, it is.  But I get a lot
-of bug reports and a lot of patches, and most of them don't get
-installed because I don't have the time to finish the job that the bug
-reporter or the contributor could have done.  Patches that arrive
-complete, working, and well designed, tend to get installed on the day
-they arrive.  The others go into a queue and get installed if and when
-I scan back over the queue -- which can literally take months
-sometimes.  It's in both our interests to make patch installation easy
--- you get your changes installed, and I make some forward progress on
-GDB in a normal 12-hour day (instead of them having to wait until I
-have a 14-hour or 16-hour day to spend cleaning up patches before I
-can install them).
-
-Please send patches to @code{bug-gdb@@prep.ai.mit.edu}, if they are less
-than about 25,000 characters.  If longer than that, either make them
-available somehow (e.g. anonymous FTP), and announce it on
-@code{bug-gdb}, or send them directly to the GDB maintainers at
-@code{gdb-patches@@cygnus.com}.
-
-@node Host Conditionals
-@chapter Host Conditionals
+@section Host Conditionals
 
 When GDB is configured and compiled, various macros are defined or left
 undefined, to control compilation based on the attributes of the host
@@ -1494,117 +840,73 @@ system.  These macros and their meanings (or if the meaning is not
 documented here, then one of the source files where they are used is
 indicated) are:
 
-@emph{NOTE:  For now, both host and target conditionals are here.
-Eliminate target conditionals from this list as they are identified.}
-
 @table @code
 
-@item BLOCK_ADDRESS_FUNCTION_RELATIVE
-dbxread.c
-
 @item GDBINIT_FILENAME
 The default name of GDB's initialization file (normally @file{.gdbinit}).
 
 @item MEM_FNS_DECLARED
-Your host config file defines this if it includes 
-declarations of @code{memcpy} and @code{memset}.  Define this
-to avoid conflicts between the native include
-files and the declarations in @file{defs.h}.
+Your host config file defines this if it includes declarations of
+@code{memcpy} and @code{memset}.  Define this to avoid conflicts between
+the native include files and the declarations in @file{defs.h}.
 
 @item NO_SYS_FILE
 Define this if your system does not have a @code{<sys/file.h>}.
 
 @item SIGWINCH_HANDLER
-If your host defines @code{SIGWINCH}, you can define this to
-be the name of a function to be called if @code{SIGWINCH} is received.
+If your host defines @code{SIGWINCH}, you can define this to be the name
+of a function to be called if @code{SIGWINCH} is received.
 
 @item SIGWINCH_HANDLER_BODY
-Define this to expand into code that will define the function
-named by the expansion of @code{SIGWINCH_HANDLER}.
-
-@item ADDITIONAL_OPTIONS
-main.c
-@item ADDITIONAL_OPTION_CASES
-main.c
-@item ADDITIONAL_OPTION_HANDLER
-main.c
-@item ADDITIONAL_OPTION_HELP
-main.c
-
-@item AIX_BUGGY_PTRACE_CONTINUE
-infptrace.c
+Define this to expand into code that will define the function named by
+the expansion of @code{SIGWINCH_HANDLER}.
 
 @item ALIGN_STACK_ON_STARTUP
-Define this if your system is of a sort that will crash in @code{tgetent}
-if the stack happens not to be longword-aligned when @code{main} is
-called.  This is a rare situation, but is known to occur on several
-different types of systems.
-
-@item CFRONT_PRODUCER
-dwarfread.c
+Define this if your system is of a sort that will crash in
+@code{tgetent} if the stack happens not to be longword-aligned when
+@code{main} is called.  This is a rare situation, but is known to occur
+on several different types of systems.
 
 @item CRLF_SOURCE_FILES
 Define this if host files use @code{\r\n} rather than @code{\n} as a
 line terminator.  This will cause source file listings to omit @code{\r}
-characters when printing.  It must be possible to open files in binary
+characters when printing and it will allow \r\n line endings of files
+which are "sourced" by gdb.  It must be possible to open files in binary
 mode using @code{O_BINARY} or, for fopen, @code{"rb"}.
 
-@item DBX_PARM_SYMBOL_CLASS
-stabsread.c
-
 @item DEFAULT_PROMPT
 The default value of the prompt string (normally @code{"(gdb) "}).
 
 @item DEV_TTY
-symmisc.c
-@item DO_REGISTERS_INFO
-infcmd.c
+The name of the generic TTY device, defaults to @code{"/dev/tty"}.
 
 @item FCLOSE_PROVIDED
-Define this if the system declares @code{fclose} in the headers included in
-@code{defs.h}.  This isn't needed unless your compiler is unusually anal.
-
-@sc{ANSI} definition.
-
-@item FILES_INFO_HOOK
-target.c
-@item FLOAT_INFO
-infcmd.c
+Define this if the system declares @code{fclose} in the headers included
+in @code{defs.h}.  This isn't needed unless your compiler is unusually
+anal.
 
 @item FOPEN_RB
 Define this if binary files are opened the same way as text files.
 
-@item GCC2_COMPILED_FLAG_SYMBOL
-dbxread.c
-@item GCC_COMPILED_FLAG_SYMBOL
-dbxread.c
-@item GCC_MANGLE_BUG
-symtab.c
-@item GCC_PRODUCER
-dwarfread.c
-
 @item GETENV_PROVIDED
-Define this if the system declares @code{getenv} in its headers included in
-@code{defs.h}. This isn't needed unless your compiler is unusually anal.
-
-@item GPLUS_PRODUCER
-dwarfread.c
+Define this if the system declares @code{getenv} in its headers included
+in @code{defs.h}. This isn't needed unless your compiler is unusually
+anal.
 
 @item HAVE_MMAP
 In some cases, use the system call @code{mmap} for reading symbol
 tables.  For some machines this allows for sharing and quick updates.
 
 @item HAVE_SIGSETMASK
-Define this if the host system has job control, but does not
-define @code{sigsetmask()}.
-Currently, this is only true of the RS/6000.
+Define this if the host system has job control, but does not define
+@code{sigsetmask()}.  Currently, this is only true of the RS/6000.
 
 @item HAVE_TERMIO
-inflow.c
+Define this if the host system has @code{termio.h}.
 
 @item HOST_BYTE_ORDER
-The ordering of bytes in the host.
-This must be defined to be either @code{BIG_ENDIAN} or @code{LITTLE_ENDIAN}.
+The ordering of bytes in the host.  This must be defined to be either
+@code{BIG_ENDIAN} or @code{LITTLE_ENDIAN}.
 
 @item INT_MAX
 @item INT_MIN
@@ -1616,45 +918,22 @@ Values for host-side constants.
 @item ISATTY
 Substitute for isatty, if not available.
 
-@item KERNEL_DEBUGGING
-tm-ultra3.h
-
-@item KERNEL_U_ADDR
-Define this to the address of the @code{u} structure (the ``user struct'',
-also known as the ``u-page'') in kernel virtual memory.  GDB needs to know
-this so that it can subtract this address from absolute addresses in
-the upage, that are obtained via ptrace or from core files.  On systems
-that don't need this value, set it to zero.
-
-@item KERNEL_U_ADDR_BSD
-Define this to cause GDB to determine the address of @code{u} at runtime,
-by using Berkeley-style @code{nlist} on the kernel's image in the root
-directory.
-
-@item KERNEL_U_ADDR_HPUX
-Define this to cause GDB to determine the address of @code{u} at runtime,
-by using HP-style @code{nlist} on the kernel's image in the root
-directory.
-
-@item LCC_PRODUCER
-dwarfread.c
-
 @item LONGEST
-This is the longest integer type available on the host.
-If not defined, it will default to @code{long long} or @code{long},
-depending on @code{CC_HAS_LONG_LONG}.
+This is the longest integer type available on the host.  If not defined,
+it will default to @code{long long} or @code{long}, depending on
+@code{CC_HAS_LONG_LONG}.
 
 @item CC_HAS_LONG_LONG
-Define this if the host C compiler supports ``long long''.
-This is set by the configure script.
+Define this if the host C compiler supports ``long long''.  This is set
+by the configure script.
 
 @item PRINTF_HAS_LONG_LONG
 Define this if the host can handle printing of long long integers via
 the printf format directive ``ll''. This is set by the configure script.
 
 @item HAVE_LONG_DOUBLE
-Define this if the host C compiler supports ``long double''.
-This is set by the configure script.
+Define this if the host C compiler supports ``long double''.  This is
+set by the configure script.
 
 @item PRINTF_HAS_LONG_DOUBLE
 Define this if the host can handle printing of long double float-point
@@ -1671,16 +950,14 @@ Define this if @code{lseek (n)} does not necessarily move to byte number
 @code{n} in the file.  This is only used when reading source files.  It
 is normally faster to define @code{CRLF_SOURCE_FILES} when possible.
 
-@item L_LNNO32
-coffread.c
-
 @item L_SET
-This macro is used as the argument to lseek (or, most commonly, bfd_seek).
-FIXME, should be replaced by SEEK_SET instead, which is the POSIX equivalent.
+This macro is used as the argument to lseek (or, most commonly,
+bfd_seek).  FIXME, should be replaced by SEEK_SET instead, which is the
+POSIX equivalent.
 
 @item MAINTENANCE_CMDS
-If the value of this is 1, then a number of optional maintenance commands
-are compiled in.
+If the value of this is 1, then a number of optional maintenance
+commands are compiled in.
 
 @item MALLOC_INCOMPATIBLE
 Define this if the system's prototype for @code{malloc} differs from the
@@ -1698,283 +975,170 @@ whether job control is available.
 
 @item NORETURN
 If defined, this should be one or more tokens, such as @code{volatile},
-that can be used in both the declaration and definition of functions
-to indicate that they never return.  The default is already set
-correctly if compiling with GCC. 
-This will almost never need to be defined.
+that can be used in both the declaration and definition of functions to
+indicate that they never return.  The default is already set correctly
+if compiling with GCC.  This will almost never need to be defined.
 
 @item ATTR_NORETURN
 If defined, this should be one or more tokens, such as
 @code{__attribute__ ((noreturn))}, that can be used in the declarations
 of functions to indicate that they never return.  The default is already
-set correctly if compiling with GCC.
-This will almost never need to be defined.
-
-@item NOTICE_SIGNAL_HANDLING_CHANGE
-infrun.c
-@item NO_HIF_SUPPORT
-remote-mm.c
-@item NO_JOB_CONTROL
-signals.h
+set correctly if compiling with GCC.  This will almost never need to be
+defined.
 
 @item USE_MMALLOC
 GDB will use the @code{mmalloc} library for memory allocation for symbol
 reading if this symbol is defined.  Be careful defining it since there
-are systems on which @code{mmalloc} does not
-work for some reason.  One example is the DECstation, where its RPC
-library can't cope with our redefinition of @code{malloc} to call
-@code{mmalloc}.  When defining @code{USE_MMALLOC}, you will also have
-to set @code{MMALLOC} in the Makefile, to point to the mmalloc library.
-This define is set when you configure with --with-mmalloc.
+are systems on which @code{mmalloc} does not work for some reason.  One
+example is the DECstation, where its RPC library can't cope with our
+redefinition of @code{malloc} to call @code{mmalloc}.  When defining
+@code{USE_MMALLOC}, you will also have to set @code{MMALLOC} in the
+Makefile, to point to the mmalloc library.  This define is set when you
+configure with --with-mmalloc.
 
 @item NO_MMCHECK
 Define this if you are using @code{mmalloc}, but don't want the overhead
 of checking the heap with @code{mmcheck}.  Note that on some systems,
 the C runtime makes calls to malloc prior to calling @code{main}, and if
-@code{free} is ever called with these pointers after calling @code{mmcheck}
-to enable checking, a memory corruption abort is certain to occur.  These
-systems can still use mmalloc, but must define NO_MMCHECK.
+@code{free} is ever called with these pointers after calling
+@code{mmcheck} to enable checking, a memory corruption abort is certain
+to occur.  These systems can still use mmalloc, but must define
+NO_MMCHECK.
 
 @item MMCHECK_FORCE
-Define this to 1 if the C runtime allocates memory prior to @code{mmcheck}
-being called, but that memory is never freed so we don't have to worry
-about it triggering a memory corruption abort.  The default is 0, which
-means that @code{mmcheck} will only install the heap checking functions
-if there has not yet been any memory allocation calls, and if it fails
-to install the functions, gdb will issue a warning.  This is currently
-defined if you configure using --with-mmalloc.
+Define this to 1 if the C runtime allocates memory prior to
+@code{mmcheck} being called, but that memory is never freed so we don't
+have to worry about it triggering a memory corruption abort.  The
+default is 0, which means that @code{mmcheck} will only install the heap
+checking functions if there has not yet been any memory allocation
+calls, and if it fails to install the functions, gdb will issue a
+warning.  This is currently defined if you configure using
+--with-mmalloc.
 
 @item NO_SIGINTERRUPT
-remote-adapt.c
-@item NUMERIC_REG_NAMES
-mips-tdep.c
-@item N_SETV
-dbxread.c
-@item N_SET_MAGIC
-hppabsd-tdep.c
-@item ONE_PROCESS_WRITETEXT
-breakpoint.c
-@item O_BINARY
-exec.c
-@item O_RDONLY
-xm-ultra3.h
-@item PCC_SOL_BROKEN
-dbxread.c
-@item PC_LOAD_SEGMENT
-stack.c
-@item PRINT_RANDOM_SIGNAL
-infcmd.c
-@item PRINT_REGISTER_HOOK
-infcmd.c
-@item PROCESS_LINENUMBER_HOOK
-buildsym.c
-@item PROLOGUE_FIRSTLINE_OVERLAP
-infrun.c
-@item PUSH_ARGUMENTS
-valops.c
-@item PYRAMID_CONTROL_FRAME_DEBUGGING
-pyr-xdep.c
-@item PYRAMID_CORE
-pyr-xdep.c
-@item PYRAMID_PTRACE
-pyr-xdep.c
-@item REGISTER_BYTES
-remote.c
-@item REG_STACK_SEGMENT
-exec.c
-@item REG_STRUCT_HAS_ADDR
-findvar.c
-@item R_FP
-dwarfread.c
+Define this to indicate that siginterrupt() is not available.
+
 @item R_OK
-xm-altos.h
-@item SEEK_END
-state.c
+Define if this is not in a system .h file.
+
+@item SEEK_CUR
 @item SEEK_SET
-state.c
-@item SEM
-coffread.c
+Define these to appropriate value for the system lseek(), if not already
+defined.
 
-@item SHELL_COMMAND_CONCAT
-infrun.c
-@item SHELL_FILE
-infrun.c
-@item SHIFT_INST_REGS
-breakpoint.c
-@item SIGTRAP_STOP_AFTER_LOAD
-infrun.c
-@item STACK_ALIGN
-valops.c
 @item STOP_SIGNAL
-main.c
-@item SUN4_COMPILER_FEATURE
-infrun.c
-@item SUN_FIXED_LBRAC_BUG
-dbxread.c
-@item SVR4_SHARED_LIBS
-solib.c
-@item SYMBOL_RELOADING_DEFAULT
-symfile.c
-@item TIOCGETC
-inflow.c
-@item TIOCGLTC
-inflow.c
-@item TIOCGPGRP
-inflow.c
-@item TIOCLGET
-inflow.c
-@item TIOCLSET
-inflow.c
-@item TIOCNOTTY
-inflow.c
-@item UPAGES
-altos-xdep.c
+This is the signal for stopping GDB.  Defaults to SIGTSTP.  (Only
+redefined for the Convex.)
+
 @item USE_O_NOCTTY
-inflow.c
+Define this if the interior's tty should be opened with the O_NOCTTY
+flag.  (FIXME: This should be a native-only flag, but @file{inflow.c} is
+always linked in.)
 
 @item USG
-Means that System V (prior to SVR4) include files are in use.
-(FIXME:  This symbol is abused in @file{infrun.c}, @file{regex.c},
-@file{remote-nindy.c}, and @file{utils.c} for other things, at the moment.)
-
-@item WRS_ORIG
-remote-vx.c
-@item alloca
-defs.h
-@item const
-defs.h
+Means that System V (prior to SVR4) include files are in use.  (FIXME:
+This symbol is abused in @file{infrun.c}, @file{regex.c},
+@file{remote-nindy.c}, and @file{utils.c} for other things, at the
+moment.)
 
 @item lint
-Define this to help lint in some stupid way.
+Define this to help placate lint in some situations.
 
 @item volatile
-Define this to override the defaults of @code{__volatile__} or @code{/**/}.
+Define this to override the defaults of @code{__volatile__} or
+@code{/**/}.
 
 @end table
 
-Platform-specific host conditionals.
 
-@table @code
+@node Target Architecture Definition
 
-@item ALTOS
-altos-xdep.c
-@item ALTOS_AS
-xm-altos.h
-@item MOTOROLA
-xm-altos.h
-@item NBPG
-altos-xdep.c
+@chapter Target Architecture Definition
 
-@item BCS
-tm-delta88.h
+GDB's target architecture defines what sort of machine-language programs
+GDB can work with, and how it works with them.
 
-@item DELTA88
-m88k-xdep.c
-@item DGUX
-m88k-xdep.c
+At present, the target architecture definition consists of a number of C
+macros.
 
-@item F_OK
-xm-ultra3.h
+@section Registers and Memory
 
-@end table
+GDB's model of the target machine is rather simple.  GDB assumes the
+machine includes a bank of registers and a block of memory.  Each
+register may have a different size.
 
-Regex conditionals.
+GDB does not have a magical way to match up with the compiler's idea of
+which registers are which; however, it is critical that they do match up
+accurately.  The only way to make this work is to get accurate
+information about the order that the compiler uses, and to reflect that
+in the @code{REGISTER_NAMES} and related macros.
 
-@table @code
+GDB can handle big-endian, little-endian, and bi-endian architectures.
 
-@item C_ALLOCA
-regex.c
-@item NFAILURES
-regex.c
-@item RE_NREGS
-regex.h
-@item SIGN_EXTEND_CHAR
-regex.c
-@item SWITCH_ENUM_BUG
-regex.c
-@item SYNTAX_TABLE
-regex.c
-@item Sword
-regex.c
-@item sparc
-regex.c
-@item test
-regex.c
+@section Frame Interpretation
 
-@end table
+@section Inferior Call Setup
 
-@node Target Conditionals
-@chapter Target Conditionals
+@section Compiler Characteristics
 
-When GDB is configured and compiled, various macros are defined or left
-undefined, to control compilation based on the attributes of the target
-system.  These macros and their meanings are:
+@section Target Conditionals
 
-@emph{NOTE:  For now, both host and target conditionals are here.
-Eliminate host conditionals from this list as they are identified.}
+This section describes the macros that you can use to define the target
+machine.
 
 @table @code
 
-@item PUSH_DUMMY_FRAME
-Used in @samp{call_function_by_hand} to create an artificial stack frame.
-
-@item POP_FRAME
-Used in @samp{call_function_by_hand} to remove an artificial stack frame.
-
-@item BLOCK_ADDRESS_FUNCTION_RELATIVE
-dbxread.c
-@item PYRAMID_CONTROL_FRAME_DEBUGGING
-pyr-xdep.c
 @item ADDITIONAL_OPTIONS
-main.c
 @item ADDITIONAL_OPTION_CASES
-main.c
 @item ADDITIONAL_OPTION_HANDLER
-main.c
 @item ADDITIONAL_OPTION_HELP
-main.c
+These are a set of macros that allow the addition of additional command
+line options to GDB.  They are currently used only for the unsupported
+i960 Nindy target, and should not be used in any other configuration.
 
 @item ADDR_BITS_REMOVE (addr)
-If a raw machine address includes any bits that are not really part
-of the address, then define this macro to expand into an expression
-that zeros those bits in @var{addr}.  For example, the two low-order
-bits of a Motorola 88K address may be used by some kernels for their
-own purposes, since addresses must always be 4-byte aligned, and so
-are of no use for addressing.  Those bits should be filtered out with
-an expression such as @code{((addr) & ~3)}.
-
-@item ALIGN_STACK_ON_STARTUP
-main.c
-@item ALTOS
-altos-xdep.c
-@item ALTOS_AS
-xm-altos.h
-@item BCS
-tm-delta88.h
+If a raw machine address includes any bits that are not really part of
+the address, then define this macro to expand into an expression that
+zeros those bits in @var{addr}.  For example, the two low-order bits of
+a Motorola 88K address may be used by some kernels for their own
+purposes, since addresses must always be 4-byte aligned, and so are of
+no use for addressing.  Those bits should be filtered out with an
+expression such as @code{((addr) & ~3)}.
 
 @item BEFORE_MAIN_LOOP_HOOK
-Define this to expand into any code that you want to execute before
-the main loop starts.  Although this is not, strictly speaking,
-a target conditional, that is how it is currently being used.
-Note that if a configuration were to define it one way for a host
-and a different way for the target, GDB will probably not compile,
-let alone run correctly.
+Define this to expand into any code that you want to execute before the
+main loop starts.  Although this is not, strictly speaking, a target
+conditional, that is how it is currently being used.  Note that if a
+configuration were to define it one way for a host and a different way
+for the target, GDB will probably not compile, let alone run correctly.
+This is currently used only for the unsupported i960 Nindy target, and
+should not be used in any other configuration.
 
 @item BELIEVE_PCC_PROMOTION
-coffread.c
+Define if the compiler promotes a short or char parameter to an int, but
+still reports the parameter as its original type, rather than the
+promoted type.
+
 @item BELIEVE_PCC_PROMOTION_TYPE
-stabsread.c
+Define this if GDB should believe the type of a short argument when
+compiled by pcc, but look within a full int space to get its value.
+Only defined for Sun-3 at present.
 
 @item BITS_BIG_ENDIAN
-Define this if the numbering of bits in the targets does *not* match
-the endianness of the target byte order.
-A value of 1 means that the bits are numbered in a big-endian order,
-0 means little-endian.
+Define this if the numbering of bits in the targets does *not* match the
+endianness of the target byte order.  A value of 1 means that the bits
+are numbered in a big-endian order, 0 means little-endian.
 
-@item BLOCK_ADDRESS_ABSOLUTE
-dbxread.c
 @item BREAKPOINT
-tm-m68k.h
+This is the character array initializer for the bit pattern to put into
+memory where a breakpoint is set.  Although it's common to use a trap
+instruction for a breakpoint, it's not required; for instance, the bit
+pattern could be an invalid instruction.  The breakpoint must be no
+longer than the shortest instruction of the architecture.
+
+@item BIG_BREAKPOINT
+@item LITTLE_BREAKPOINT
+Similar to BREAKPOINT, but used for bi-endian targets.
 
 @item CALL_DUMMY
 valops.c
@@ -1984,19 +1148,22 @@ inferior.h
 valops.c
 
 @item CANNOT_FETCH_REGISTER (regno)
-A C expression that should be nonzero if @var{regno} cannot be
-fetched from an inferior process.
-This is only relevant if @code{FETCH_INFERIOR_REGISTERS} is not
-defined.
+A C expression that should be nonzero if @var{regno} cannot be fetched
+from an inferior process.  This is only relevant if
+@code{FETCH_INFERIOR_REGISTERS} is not defined.
 
 @item CANNOT_STORE_REGISTER (regno)
 A C expression that should be nonzero if @var{regno} should not be
 written to the target.  This is often the case for program counters,
-status words, and other special registers.  If this is not defined,
-GDB will assume that all registers may be written.
+status words, and other special registers.  If this is not defined, GDB
+will assume that all registers may be written.
 
-@item CFRONT_PRODUCER
-dwarfread.c
+@item CHILL_PRODUCER
+@item GCC_PRODUCER
+@item GPLUS_PRODUCER
+@item LCC_PRODUCER
+If defined, these are the producer strings in a DWARF 1 file.  All of
+these have reasonable defaults already.
 
 @item DO_DEFERRED_STORES
 @item CLEAR_DEFERRED_STORES
@@ -2006,244 +1173,219 @@ and to cancel any deferred stores.
 Currently only implemented correctly for native Sparc configurations?
 
 @item CPLUS_MARKER
-Define this to expand into the character that G++ uses to
-distinguish compiler-generated identifiers from programmer-specified
-identifiers.  By default, this expands into @code{'$'}.
-Most System V targets should define this to @code{'.'}.
+Define this to expand into the character that G++ uses to distinguish
+compiler-generated identifiers from programmer-specified identifiers.
+By default, this expands into @code{'$'}.  Most System V targets should
+define this to @code{'.'}.
 
 @item DBX_PARM_SYMBOL_CLASS
-stabsread.c
+Hook for the @code{SYMBOL_CLASS} of a parameter when decoding DBX symbol
+information.  In the i960, parameters can be stored as locals or as
+args, depending on the type of the debug record.
 
 @item DECR_PC_AFTER_BREAK
-Define this to be the amount by which to decrement the PC after
-the program encounters a breakpoint.
-This is often the number of bytes in BREAKPOINT, though not always.
-For most targets this value will be 0.
+Define this to be the amount by which to decrement the PC after the
+program encounters a breakpoint.  This is often the number of bytes in
+BREAKPOINT, though not always.  For most targets this value will be 0.
 
 @item DECR_PC_AFTER_HW_BREAK
 Similarly, for hardware breakpoints.
 
-@item DELTA88
-m88k-xdep.c
-@item DEV_TTY
-symmisc.c
-@item DGUX
-m88k-xdep.c
-
 @item DISABLE_UNSETTABLE_BREAK addr
 If defined, this should evaluate to 1 if @var{addr} is in a shared
 library in which breakpoints cannot be set and so should be disabled.
 
 @item DO_REGISTERS_INFO
-infcmd.c
+If defined, use this to print the value of a register or all registers.
 
 @item END_OF_TEXT_DEFAULT
 This is an expression that should designate the end of the text section
 (? FIXME ?)
 
-@item EXTRACT_RETURN_VALUE
-tm-m68k.h
-@item EXTRACT_STRUCT_VALUE_ADDRESS
-values.c
+@item EXTRACT_RETURN_VALUE(type,regbuf,valbuf)
+Define this to extract a function's return value of type @var{type} from
+the raw register state @var{regbuf} and copy that, in virtual format,
+into @var{valbuf}.
+ 
+@item EXTRACT_STRUCT_VALUE_ADDRESS(regbuf)
+Define this to extract from an array @var{regbuf} containing the (raw)
+register state, the address in which a function should return its
+structure value, as a CORE_ADDR (or an expression that can be used as
+one).
 
 @item EXTRA_FRAME_INFO
-If defined, this must be a list of slots that may be inserted into
-the @code{frame_info} structure defined in @code{frame.h}.
+If defined, this must be a list of slots that may be inserted into the
+@code{frame_info} structure defined in @code{frame.h}.
 
-@item EXTRA_SYMTAB_INFO
-If defined, this must be a list of slots that may be inserted into
-the @code{symtab} structure defined in @code{symtab.h}.
-
-@item FILES_INFO_HOOK
-target.c
 @item FLOAT_INFO
-infcmd.c
-@item FP0_REGNUM
-a68v-xdep.c
-@item FPC_REGNUM
-mach386-xdep.c
+If defined, then the `info float' command will print information about
+the processor's floating point unit.
+
 @item FP_REGNUM
-parse.c
-@item FRAMELESS_FUNCTION_INVOCATION
-blockframe.c
+The number of the frame pointer register.
+
+@item FRAMELESS_FUNCTION_INVOCATION(fi, frameless)
+Define this to set the variable @var{frameless} to 1 if the function
+invocation represented by @var{fi} does not have a stack frame
+associated with it.  Otherwise set it to 0.
+
 @item FRAME_ARGS_ADDRESS_CORRECT
 stack.c
 
-@item FRAME_CHAIN
-Given FRAME, return a pointer to the calling frame.
+@item FRAME_CHAIN(frame)
+Given @var{frame}, return a pointer to the calling frame.
+
+@item FRAME_CHAIN_COMBINE(chain,frame)
+Define this to take the frame chain pointer and the frame's nominal
+address and produce the nominal address of the caller's frame.
+Presently only defined for HP PA.
+
+@item FRAME_CHAIN_VALID(chain,thisframe)
+Define this to be an expression that returns zero if the given frame is
+an outermost frame, with no caller, and nonzero otherwise.  The default
+definition is nonzero if the chain pointer is nonzero and given frame's
+PC is not inside the startup file (such as @file{crt0.o}).  The
+alternate default definition (which is used if
+FRAME_CHAIN_VALID_ALTERNATE is defined) is nonzero if the chain pointer
+is nonzero and the given frame's PC is not in @code{main()} or a known
+entry point function (such as @code{_start()}).
 
-@item FRAME_CHAIN_COMBINE
-blockframe.c
-@item FRAME_CHAIN_VALID
-frame.h
 @item FRAME_CHAIN_VALID_ALTERNATE
-frame.h
+Define this in order to use the alternate default definition of
+@code{FRAME_CHAIN_VALID}.
+
 @item FRAME_FIND_SAVED_REGS
 stack.c
-@item FRAME_GET_BASEREG_VALUE
-frame.h
 
 @item FRAME_NUM_ARGS (val, fi)
-For the frame described by fi, set val to the number of arguments
+For the frame described by @var{fi}, set @var{val} to the number of arguments
 that are being passed.
 
-@item FRAME_SPECIFICATION_DYADIC
-stack.c
-
-@item FRAME_SAVED_PC
-Given FRAME, return the pc saved there.  That is, the return address.
+@item FRAME_SAVED_PC(frame)
+Given @var{frame}, return the pc saved there.  That is, the return
+address.
 
 @item FUNCTION_EPILOGUE_SIZE
 For some COFF targets, the @code{x_sym.x_misc.x_fsize} field of the
 function end symbol is 0.  For such targets, you must define
-@code{FUNCTION_EPILOGUE_SIZE} to expand into the standard size
-of a function's epilogue.
+@code{FUNCTION_EPILOGUE_SIZE} to expand into the standard size of a
+function's epilogue.
 
-@item GCC2_COMPILED_FLAG_SYMBOL
-dbxread.c
 @item GCC_COMPILED_FLAG_SYMBOL
-dbxread.c
-@item GCC_MANGLE_BUG
-symtab.c
-@item GCC_PRODUCER
-dwarfread.c
+@item GCC2_COMPILED_FLAG_SYMBOL
+If defined, these are the names of the symbols that GDB will look for to
+detect that GCC compiled the file.  The default symbols are
+@code{gcc_compiled.} and @code{gcc2_compiled.}, respectively. (Currently
+only defined for the Delta 68.)
 
 @item GDB_TARGET_IS_HPPA
-This determines whether horrible kludge code in dbxread.c and partial-stab.h
-is used to mangle multiple-symbol-table files from HPPA's.  This should all
-be ripped out, and a scheme like elfread.c used.
+This determines whether horrible kludge code in dbxread.c and
+partial-stab.h is used to mangle multiple-symbol-table files from
+HPPA's.  This should all be ripped out, and a scheme like elfread.c
+used.
 
 @item GDB_TARGET_IS_MACH386
-mach386-xdep.c
 @item GDB_TARGET_IS_SUN3
-a68v-xdep.c
 @item GDB_TARGET_IS_SUN386
-sun386-xdep.c
+Kludges that should go away.
 
 @item GET_LONGJMP_TARGET
-For most machines, this is a target-dependent parameter.  On the DECstation
-and the Iris, this is a native-dependent parameter, since <setjmp.h> is
-needed to define it.
+For most machines, this is a target-dependent parameter.  On the
+DECstation and the Iris, this is a native-dependent parameter, since
+<setjmp.h> is needed to define it.
 
-This macro determines the target PC address that longjmp() will jump
-to, assuming that we have just stopped at a longjmp breakpoint.  It
-takes a CORE_ADDR * as argument, and stores the target PC value through
-this pointer.  It examines the current state of the machine as needed.
+This macro determines the target PC address that longjmp() will jump to,
+assuming that we have just stopped at a longjmp breakpoint.  It takes a
+CORE_ADDR * as argument, and stores the target PC value through this
+pointer.  It examines the current state of the machine as needed.
 
 @item GET_SAVED_REGISTER
-Define this if you need to supply your own definition for the
-function @code{get_saved_register}.
-Currently this is only done for the a29k.
-
-@item GPLUS_PRODUCER
-dwarfread.c
-
-@item GR64_REGNUM
-Very a29k-specific.
+Define this if you need to supply your own definition for the function
+@code{get_saved_register}.  Currently this is only done for the a29k.
 
 @item HAVE_REGISTER_WINDOWS
 Define this if the target has register windows.
-@item REGISTER_IN_WINDOW_P regnum
-Define this to be an expression that is 1 is the given register is
-in the window.
+@item REGISTER_IN_WINDOW_P (regnum)
+Define this to be an expression that is 1 if the given register is in
+the window.
 
 @item IBM6000_TARGET
-Shows that we are configured for an IBM RS/6000 target.  This conditional
-should be eliminated (FIXME) and replaced by feature-specific macros.
-It was introduced in haste and we are repenting at leisure.
+Shows that we are configured for an IBM RS/6000 target.  This
+conditional should be eliminated (FIXME) and replaced by
+feature-specific macros.  It was introduced in haste and we are
+repenting at leisure.
 
 @item IEEE_FLOAT
 Define this if the target system uses IEEE-format floating point numbers.
 
-@item IGNORE_SYMBOL type
-This seems to be no longer used.
-
 @item INIT_EXTRA_FRAME_INFO (fromleaf, fci)
-If defined, this should be a C expression or statement that fills
-in the @code{EXTRA_FRAME_INFO} slots of the given frame @var{fci}.
-
-@item INIT_EXTRA_SYMTAB_INFO
-symfile.c
+If defined, this should be a C expression or statement that fills in the
+@code{EXTRA_FRAME_INFO} slots of the given frame @var{fci}.
 
 @item INIT_FRAME_PC (fromleaf, prev)
-This is a C statement that sets the pc of the frame pointed
-to by @var{prev}.  [By default...]
+This is a C statement that sets the pc of the frame pointed to by
+@var{prev}.  [By default...]
 
 @item INNER_THAN
-Define this to be either @code{<} if the target's stack grows
-downward in memory, or @code{>} is the stack grows upwards.
+Define this to be either @code{<} if the target's stack grows downward
+in memory, or @code{>} is the stack grows upwards.
 
-@item IN_SIGTRAMP (pc name)
-Define this to return true if the given pc and/or name indicates
-that the current function is a sigtramp.
+@item IN_SIGTRAMP (pc, name)
+Define this to return true if the given @var{pc} and/or @var{name}
+indicates that the current function is a sigtramp.
 
 @item SIGTRAMP_START (pc)
 @item SIGTRAMP_END (pc)
-Define these to be the start and end address of the sigtramp for the given pc.
-On machines where the address is just a compile time constant, the macro
-expansion will typically just ignore the supplied pc.
+Define these to be the start and end address of the sigtramp for the
+given @var{pc}.  On machines where the address is just a compile time
+constant, the macro expansion will typically just ignore the supplied
+@var{pc}.
 
 @item IN_SOLIB_TRAMPOLINE pc name
-Define this to evaluate to nonzero if the program is stopped in
-the trampoline that connects to a shared library.
+Define this to evaluate to nonzero if the program is stopped in the
+trampoline that connects to a shared library.
 
-@item IS_TRAPPED_INTERNALVAR name
-This is an ugly hook to allow the specification of special actions
-that should occur as a side-effect of setting the value of a variable
-internal to GDB.  Currently only used by the h8500.
-Note that this could be either a host or target conditional.
+@item IS_TRAPPED_INTERNALVAR (name)
+This is an ugly hook to allow the specification of special actions that
+should occur as a side-effect of setting the value of a variable
+internal to GDB.  Currently only used by the h8500.  Note that this
+could be either a host or target conditional.
 
 @item KERNEL_DEBUGGING
 tm-ultra3.h
-@item LCC_PRODUCER
-dwarfread.c
-@item L_LNNO32
-coffread.c
+
 @item MIPSEL
 mips-tdep.c
-@item MOTOROLA
-xm-altos.h
-@item NBPG
-altos-xdep.c
 
 @item NEED_TEXT_START_END
-Define this if GDB should determine the start and end addresses
-of the text section.  (Seems dubious.)
+Define this if GDB should determine the start and end addresses of the
+text section.  (Seems dubious.)
 
-@item NOTICE_SIGNAL_HANDLING_CHANGE
-infrun.c
 @item NO_HIF_SUPPORT
-remote-mm.c
-@item NO_SIGINTERRUPT
-remote-adapt.c
+(Specific to the a29k.)
 
 @item NO_SINGLE_STEP
-Define this if the target does not support single-stepping.
-If this is defined, you must supply, in @code{*-tdep.c}, the function
-@code{single_step}, which takes a target_signal as argument and returns nothing.
-It must insert breakpoints at each possible destinations of the next
-instruction.  See @code{sparc-tdep.c} and @code{rs6000-tdep.c}
+Define this if the target does not support single-stepping.  If this is
+defined, you must supply, in @code{*-tdep.c}, the function
+@code{single_step}, which takes a target_signal as argument and returns
+nothing.  It must insert breakpoints at each possible destinations of
+the next instruction.  See @code{sparc-tdep.c} and @code{rs6000-tdep.c}
 for examples.
 
-@item NUMERIC_REG_NAMES
-mips-tdep.c
-@item N_SETV
-dbxread.c
-@item N_SET_MAGIC
-hppabsd-tdep.c
-@item ONE_PROCESS_WRITETEXT
-breakpoint.c
 @item PCC_SOL_BROKEN
-dbxread.c
+(Used only in the Convex target.)
+
 @item PC_IN_CALL_DUMMY
 inferior.h
+
 @item PC_LOAD_SEGMENT
-stack.c
+If defined, print information about the load segment for the program
+counter.  (Defined only for the RS/6000.)
 
 @item PC_REGNUM
-If the program counter is kept in a register, then define this macro
-to be the number of that register.
-This need be defined only if @code{TARGET_WRITE_PC} is not defined.
+If the program counter is kept in a register, then define this macro to
+be the number of that register.  This need be defined only if
+@code{TARGET_WRITE_PC} is not defined.
 
 @item NPC_REGNUM
 The number of the ``next program counter'' register, if defined.
@@ -2252,101 +1394,100 @@ The number of the ``next program counter'' register, if defined.
 The number of the ``next next program counter'' register, if defined.
 Currently, this is only defined for the Motorola 88K.
 
-@item PRINT_RANDOM_SIGNAL
-infcmd.c
-@item PRINT_REGISTER_HOOK
-infcmd.c
+@item PRINT_REGISTER_HOOK (regno)
+If defined, this must be a function that prints the contents of the
+given register to standard output.
 
 @item PRINT_TYPELESS_INTEGER
-This is an obscure substitute for @code{print_longest} that
-seems to have been defined for the Convex target.
+This is an obscure substitute for @code{print_longest} that seems to
+have been defined for the Convex target.
 
 @item PROCESS_LINENUMBER_HOOK
-buildsym.c
+A hook defined for XCOFF reading.
+
 @item PROLOGUE_FIRSTLINE_OVERLAP
-infrun.c
+(Only used in unsupported Convex configuration.)
+
 @item PS_REGNUM
-parse.c
-@item PUSH_ARGUMENTS
-valops.c
+If defined, this is the number of the processor status register.  (This
+definition is only used in generic code when parsing "$ps".)
+
+@item POP_FRAME
+Used in @samp{call_function_by_hand} to remove an artificial stack
+frame.
+
+@item PUSH_ARGUMENTS (nargs, args, sp, struct_return, struct_addr)
+Define this to push arguments onto the stack for inferior function call.
+
+@item PUSH_DUMMY_FRAME
+Used in @samp{call_function_by_hand} to create an artificial stack frame.
+
 @item REGISTER_BYTES
-remote.c
+The total amount of space needed to store GDB's copy of the machine's
+register state.
 
 @item REGISTER_NAMES
-Define this to expand into an initializer of an array of strings.
-Each string is the name of a register.
-[more detail]
+Define this to expand into an initializer of an array of strings.  Each
+string is the name of a register.
 
-@item REG_STACK_SEGMENT
-exec.c
-@item REG_STRUCT_HAS_ADDR
-findvar.c
-@item R_FP
-dwarfread.c
-@item R_OK
-xm-altos.h
+@item REG_STRUCT_HAS_ADDR (gcc_p, type)
+Define this to return 1 if the given type will be passed by pointer
+rather than directly.
 
 @item SDB_REG_TO_REGNUM
-Define this to convert sdb register numbers
-into GDB regnums.  If not defined, no conversion will be done.
+Define this to convert sdb register numbers into GDB regnums.  If not
+defined, no conversion will be done.
 
-@item SEEK_END
-state.c
-@item SEEK_SET
-state.c
-@item SEM
-coffread.c
-@item SHELL_COMMAND_CONCAT
-infrun.c
-@item SHELL_FILE
-infrun.c
 @item SHIFT_INST_REGS
-breakpoint.c
-@item SIGTRAP_STOP_AFTER_LOAD
-infrun.c
+(Only used for m88k targets.)
 
-@item SKIP_PROLOGUE
-A C statement that advances the PC across any function entry
+@item SKIP_PROLOGUE (pc)
+A C statement that advances the @var{pc} across any function entry
 prologue instructions so as to reach ``real'' code.
 
 @item SKIP_PROLOGUE_FRAMELESS_P
-A C statement that should behave similarly, but that can stop
-as soon as the function is known to have a frame.
-If not defined, @code{SKIP_PROLOGUE} will be used instead.
+A C statement that should behave similarly, but that can stop as soon as
+the function is known to have a frame.  If not defined,
+@code{SKIP_PROLOGUE} will be used instead.
 
 @item SKIP_TRAMPOLINE_CODE (pc)
-If the target machine has trampoline code that sits between callers
-and the functions being called, then define this macro to return
-a new PC that is at the start of the real function.
+If the target machine has trampoline code that sits between callers and
+the functions being called, then define this macro to return a new PC
+that is at the start of the real function.
 
 @item SP_REGNUM
-parse.c
+Define this to be the number of the register that serves as the stack
+pointer.
 
 @item STAB_REG_TO_REGNUM
-Define this to convert stab register numbers (as gotten from `r' declarations)
-into GDB regnums.  If not defined, no conversion will be done.
+Define this to convert stab register numbers (as gotten from `r'
+declarations) into GDB regnums.  If not defined, no conversion will be
+done.
 
-@item STACK_ALIGN
-valops.c
-@item STOP_SIGNAL
-main.c
+@item STACK_ALIGN (addr)
+Define this to adjust the address to the alignment required for the
+processor's stack.
+
+@item STEP_SKIPS_DELAY (addr)
+Define this to return true if the address is of an instruction with a
+delay slot.  If a breakpoint has been placed in the instruction's delay
+slot, GDB will single-step over that instruction before resuming
+normally.  Currently only defined for the Mips.
 
 @item STORE_RETURN_VALUE (type, valbuf)
 A C expression that stores a function return value of type @var{type},
 where @var{valbuf} is the address of the value to be stored.
 
-@item SUN4_COMPILER_FEATURE
-infrun.c
 @item SUN_FIXED_LBRAC_BUG
-dbxread.c
-@item SVR4_SHARED_LIBS
-solib.c
+(Used only for Sun-3 and Sun-4 targets.)
+
 @item SYMBOL_RELOADING_DEFAULT
-symfile.c
+The default value of the `symbol-reloading' variable.  (Never defined in
+current sources.)
 
 @item TARGET_BYTE_ORDER
-The ordering of bytes in the target.
-This must be defined to be either @code{BIG_ENDIAN} or @code{LITTLE_ENDIAN}.
+The ordering of bytes in the target.  This must be defined to be either
+@code{BIG_ENDIAN} or @code{LITTLE_ENDIAN}.
 
 @item TARGET_CHAR_BIT
 Number of bits in a char; defaults to 8.
@@ -2390,39 +1531,32 @@ Number of bits in a short integer; defaults to @code{2 * TARGET_CHAR_BIT}.
 @item TARGET_WRITE_FP
 These change the behavior of @code{read_pc}, @code{write_pc},
 @code{read_sp}, @code{write_sp}, @code{read_fp} and @code{write_fp}.
-For most targets, these may be left undefined.  GDB will call the
-read and write register functions with the relevant @code{_REGNUM} argument.
+For most targets, these may be left undefined.  GDB will call the read
+and write register functions with the relevant @code{_REGNUM} argument.
 
 These macros are useful when a target keeps one of these registers in a
-hard to get at place;  for example, part in a segment register and part
+hard to get at place; for example, part in a segment register and part
 in an ordinary register.
 
 @item USE_STRUCT_CONVENTION (gcc_p, type)
-If defined, this must be an expression that is nonzero if a value
-of the given @var{type} being returned from a function must have
-space allocated for it on the stack.  @var{gcc_p} is true if the
-function being considered is known to have been compiled by GCC;
-this is helpful for systems where GCC is known to use different calling
-convention than other compilers.
+If defined, this must be an expression that is nonzero if a value of the
+given @var{type} being returned from a function must have space
+allocated for it on the stack.  @var{gcc_p} is true if the function
+being considered is known to have been compiled by GCC; this is helpful
+for systems where GCC is known to use different calling convention than
+other compilers.
 
 @item VARIABLES_INSIDE_BLOCK (desc, gcc_p)
 For dbx-style debugging information, if the compiler puts variable
-declarations inside LBRAC/RBRAC blocks, this should be defined
-to be nonzero.  @var{desc} is the value of @code{n_desc} from the
-@code{N_RBRAC} symbol, and @var{gcc_p} is true if GDB has noticed
-the presence of either the @code{GCC_COMPILED_SYMBOL} or the
-@code{GCC2_COMPILED_SYMBOL}.
-By default, this is 0.
+declarations inside LBRAC/RBRAC blocks, this should be defined to be
+nonzero.  @var{desc} is the value of @code{n_desc} from the
+@code{N_RBRAC} symbol, and @var{gcc_p} is true if GDB has noticed the
+presence of either the @code{GCC_COMPILED_SYMBOL} or the
+@code{GCC2_COMPILED_SYMBOL}.  By default, this is 0.
 
 @item OS9K_VARIABLES_INSIDE_BLOCK (desc, gcc_p)
 Similarly, for OS/9000.  Defaults to 1.
 
-@item WRS_ORIG
-remote-vx.c
-
-@item test
-(Define this to enable testing code in regex.c.)
-
 @end table
 
 Motorola M68K target conditionals.
@@ -2430,21 +1564,259 @@ Motorola M68K target conditionals.
 @table @code
 
 @item BPT_VECTOR
-Define this to be the 4-bit location of the breakpoint trap vector.
-If not defined, it will default to @code{0xf}.
+Define this to be the 4-bit location of the breakpoint trap vector.  If
+not defined, it will default to @code{0xf}.
 
 @item REMOTE_BPT_VECTOR
 Defaults to @code{1}.
 
 @end table
 
-@node Native Conditionals
-@chapter Native Conditionals
+@section Adding a New Target
+
+The following files define a target to GDB:
+
+@table @file
+
+@item gdb/config/@var{arch}/@var{ttt}.mt
+Contains a Makefile fragment specific to this target.  Specifies what
+object files are needed for target @var{ttt}, by defining
+@samp{TDEPFILES=@dots{}}.  Also specifies the header file which
+describes @var{ttt}, by defining @samp{TM_FILE= tm-@var{ttt}.h}.  You
+can also define @samp{TM_CFLAGS}, @samp{TM_CLIBS}, @samp{TM_CDEPS}, but
+these are now deprecated and may go away in future versions of GDB.
+
+@item gdb/config/@var{arch}/tm-@var{ttt}.h
+(@file{tm.h} is a link to this file, created by configure).  Contains
+macro definitions about the target machine's registers, stack frame
+format and instructions.
+
+@item gdb/@var{ttt}-tdep.c
+Contains any miscellaneous code required for this target machine.  On
+some machines it doesn't exist at all.  Sometimes the macros in
+@file{tm-@var{ttt}.h} become very complicated, so they are implemented
+as functions here instead, and the macro is simply defined to call the
+function.  This is vastly preferable, since it is easier to understand
+and debug.
+
+@item gdb/config/@var{arch}/tm-@var{arch}.h
+This often exists to describe the basic layout of the target machine's
+processor chip (registers, stack, etc).  If used, it is included by
+@file{tm-@var{ttt}.h}.  It can be shared among many targets that use the
+same processor.
+
+@item gdb/@var{arch}-tdep.c
+Similarly, there are often common subroutines that are shared by all
+target machines that use this particular architecture.
+
+@end table
+
+If you are adding a new operating system for an existing CPU chip, add a
+@file{config/tm-@var{os}.h} file that describes the operating system
+facilities that are unusual (extra symbol table info; the breakpoint
+instruction needed; etc).  Then write a @file{@var{arch}/tm-@var{os}.h}
+that just @code{#include}s @file{tm-@var{arch}.h} and
+@file{config/tm-@var{os}.h}.
+
+
+@node Target Vector Definition
+
+@chapter Target Vector Definition
+
+The target vector defines the interface between GDB's abstract handling
+of target systems, and the nitty-gritty code that actually exercises
+control over a process or a serial port.  GDB includes some 30-40
+different target vectors; however, each configuration of GDB includes
+only a few of them.
+
+@section File Targets
+
+Both executables and core files have target vectors.
+
+@section Standard Protocol and Remote Stubs
+
+GDB's file @file{remote.c} talks a serial protocol to code that runs in
+the target system.  GDB provides several sample ``stubs'' that can be
+integrated into target programs or operating systems for this purpose;
+they are named @file{*-stub.c}.
+
+The GDB user's manual describes how to put such a stub into your target
+code.  What follows is a discussion of integrating the SPARC stub into a
+complicated operating system (rather than a simple program), by Stu
+Grossman, the author of this stub.
+
+The trap handling code in the stub assumes the following upon entry to
+trap_low:
+
+@enumerate
+
+@item %l1 and %l2 contain pc and npc respectively at the time of the trap
+
+@item traps are disabled
+
+@item you are in the correct trap window
+
+@end enumerate
+
+As long as your trap handler can guarantee those conditions, then there
+is no reason why you shouldn't be able to `share' traps with the stub.
+The stub has no requirement that it be jumped to directly from the
+hardware trap vector.  That is why it calls @code{exceptionHandler()},
+which is provided by the external environment.  For instance, this could
+setup the hardware traps to actually execute code which calls the stub
+first, and then transfers to its own trap handler.
+
+For the most point, there probably won't be much of an issue with
+`sharing' traps, as the traps we use are usually not used by the kernel,
+and often indicate unrecoverable error conditions.  Anyway, this is all
+controlled by a table, and is trivial to modify.  The most important
+trap for us is for @code{ta 1}.  Without that, we can't single step or
+do breakpoints.  Everything else is unnecessary for the proper operation
+of the debugger/stub.
+
+From reading the stub, it's probably not obvious how breakpoints work.
+They are simply done by deposit/examine operations from GDB.
+
+@section ROM Monitor Interface
+
+@section Custom Protocols
+
+@section Transport Layer
+
+@section Builtin Simulator
+
+
+@node Native Debugging
+
+@chapter Native Debugging
+
+Several files control GDB's configuration for native support:
+
+@table @file
+
+@item gdb/config/@var{arch}/@var{xyz}.mh
+Specifies Makefile fragments needed when hosting @emph{or native} on
+machine @var{xyz}.  In particular, this lists the required
+native-dependent object files, by defining @samp{NATDEPFILES=@dots{}}.
+Also specifies the header file which describes native support on
+@var{xyz}, by defining @samp{NAT_FILE= nm-@var{xyz}.h}.  You can also
+define @samp{NAT_CFLAGS}, @samp{NAT_ADD_FILES}, @samp{NAT_CLIBS},
+@samp{NAT_CDEPS}, etc.; see @file{Makefile.in}.
+
+@item gdb/config/@var{arch}/nm-@var{xyz}.h
+(@file{nm.h} is a link to this file, created by configure).  Contains C
+macro definitions describing the native system environment, such as
+child process control and core file support.
+
+@item gdb/@var{xyz}-nat.c
+Contains any miscellaneous C code required for this native support of
+this machine.  On some machines it doesn't exist at all.
+
+@end table
+
+There are some ``generic'' versions of routines that can be used by
+various systems.  These can be customized in various ways by macros
+defined in your @file{nm-@var{xyz}.h} file.  If these routines work for
+the @var{xyz} host, you can just include the generic file's name (with
+@samp{.o}, not @samp{.c}) in @code{NATDEPFILES}.
+
+Otherwise, if your machine needs custom support routines, you will need
+to write routines that perform the same functions as the generic file.
+Put them into @code{@var{xyz}-nat.c}, and put @code{@var{xyz}-nat.o}
+into @code{NATDEPFILES}.
+
+@table @file
+
+@item inftarg.c
+This contains the @emph{target_ops vector} that supports Unix child
+processes on systems which use ptrace and wait to control the child.
+
+@item procfs.c
+This contains the @emph{target_ops vector} that supports Unix child
+processes on systems which use /proc to control the child.
+
+@item fork-child.c
+This does the low-level grunge that uses Unix system calls to do a "fork
+and exec" to start up a child process.
+
+@item infptrace.c
+This is the low level interface to inferior processes for systems using
+the Unix @code{ptrace} call in a vanilla way.
+
+@end table
+
+@section Native core file Support
+
+@table @file
+
+@item core-aout.c::fetch_core_registers()
+Support for reading registers out of a core file.  This routine calls
+@code{register_addr()}, see below.  Now that BFD is used to read core
+files, virtually all machines should use @code{core-aout.c}, and should
+just provide @code{fetch_core_registers} in @code{@var{xyz}-nat.c} (or
+@code{REGISTER_U_ADDR} in @code{nm-@var{xyz}.h}).
+
+@item core-aout.c::register_addr()
+If your @code{nm-@var{xyz}.h} file defines the macro
+@code{REGISTER_U_ADDR(addr, blockend, regno)}, it should be defined to
+set @code{addr} to the offset within the @samp{user} struct of GDB
+register number @code{regno}.  @code{blockend} is the offset within the
+``upage'' of @code{u.u_ar0}.  If @code{REGISTER_U_ADDR} is defined,
+@file{core-aout.c} will define the @code{register_addr()} function and
+use the macro in it.  If you do not define @code{REGISTER_U_ADDR}, but
+you are using the standard @code{fetch_core_registers()}, you will need
+to define your own version of @code{register_addr()}, put it into your
+@code{@var{xyz}-nat.c} file, and be sure @code{@var{xyz}-nat.o} is in
+the @code{NATDEPFILES} list.  If you have your own
+@code{fetch_core_registers()}, you may not need a separate
+@code{register_addr()}.  Many custom @code{fetch_core_registers()}
+implementations simply locate the registers themselves.@refill
+
+@end table
+
+When making GDB run native on a new operating system, to make it
+possible to debug core files, you will need to either write specific
+code for parsing your OS's core files, or customize
+@file{bfd/trad-core.c}.  First, use whatever @code{#include} files your
+machine uses to define the struct of registers that is accessible
+(possibly in the u-area) in a core file (rather than
+@file{machine/reg.h}), and an include file that defines whatever header
+exists on a core file (e.g. the u-area or a @samp{struct core}).  Then
+modify @code{trad_unix_core_file_p()} to use these values to set up the
+section information for the data segment, stack segment, any other
+segments in the core file (perhaps shared library contents or control
+information), ``registers'' segment, and if there are two discontiguous
+sets of registers (e.g.  integer and float), the ``reg2'' segment.  This
+section information basically delimits areas in the core file in a
+standard way, which the section-reading routines in BFD know how to seek
+around in.
+
+Then back in GDB, you need a matching routine called
+@code{fetch_core_registers()}.  If you can use the generic one, it's in
+@file{core-aout.c}; if not, it's in your @file{@var{xyz}-nat.c} file.
+It will be passed a char pointer to the entire ``registers'' segment,
+its length, and a zero; or a char pointer to the entire ``regs2''
+segment, its length, and a 2.  The routine should suck out the supplied
+register values and install them into GDB's ``registers'' array.
+
+If your system uses @file{/proc} to control processes, and uses ELF
+format core files, then you may be able to use the same routines for
+reading the registers out of processes and out of core files.
+
+@section ptrace
+
+@section /proc
+
+@section win32
+
+@section shared libraries
+
+@section Native Conditionals
 
 When GDB is configured and compiled, various macros are defined or left
-undefined, to control compilation when the host and target systems
-are the same.  These macros should be defined (or left undefined)
-in @file{nm-@var{system}.h}.
+undefined, to control compilation when the host and target systems are
+the same.  These macros should be defined (or left undefined) in
+@file{nm-@var{system}.h}.
 
 @table @code
 
@@ -2453,31 +1825,59 @@ If defined, then GDB will include support for the @code{attach} and
 @code{detach} commands.
 
 @item CHILD_PREPARE_TO_STORE
-If the machine stores all registers at once in the child process,
-then define this to ensure that all values are correct.
-This usually entails a read from the child.
+If the machine stores all registers at once in the child process, then
+define this to ensure that all values are correct.  This usually entails
+a read from the child.
 
-[Note that this is incorrectly defined in @file{xm-@var{system}.h}
-files currently.]
+[Note that this is incorrectly defined in @file{xm-@var{system}.h} files
+currently.]
 
 @item FETCH_INFERIOR_REGISTERS
-Define this if the native-dependent code will provide its
-own routines
+Define this if the native-dependent code will provide its own routines
 @code{fetch_inferior_registers} and @code{store_inferior_registers} in
-@file{@var{HOST}-nat.c}.
-If this symbol is @emph{not} defined, and @file{infptrace.c}
-is included in this configuration, the default routines in
-@file{infptrace.c} are used for these functions.
+@file{@var{HOST}-nat.c}.  If this symbol is @emph{not} defined, and
+@file{infptrace.c} is included in this configuration, the default
+routines in @file{infptrace.c} are used for these functions.
+
+@item FILES_INFO_HOOK
+(Only defined for Convex.)
+
+@item FP0_REGNUM
+This macro is normally defined to be the number of the first floating
+point register, if the machine has such registers.  As such, it would
+appear only in target-specific code.  However, /proc support uses this
+to decide whether floats are in use on this target.
 
 @item GET_LONGJMP_TARGET
-For most machines, this is a target-dependent parameter.  On the DECstation
-and the Iris, this is a native-dependent parameter, since <setjmp.h> is
-needed to define it.
+For most machines, this is a target-dependent parameter.  On the
+DECstation and the Iris, this is a native-dependent parameter, since
+<setjmp.h> is needed to define it.
+
+This macro determines the target PC address that longjmp() will jump to,
+assuming that we have just stopped at a longjmp breakpoint.  It takes a
+CORE_ADDR * as argument, and stores the target PC value through this
+pointer.  It examines the current state of the machine as needed.
+
+@item KERNEL_U_ADDR
+Define this to the address of the @code{u} structure (the ``user
+struct'', also known as the ``u-page'') in kernel virtual memory.  GDB
+needs to know this so that it can subtract this address from absolute
+addresses in the upage, that are obtained via ptrace or from core files.
+On systems that don't need this value, set it to zero.
+
+@item KERNEL_U_ADDR_BSD
+Define this to cause GDB to determine the address of @code{u} at
+runtime, by using Berkeley-style @code{nlist} on the kernel's image in
+the root directory.
+
+@item KERNEL_U_ADDR_HPUX
+Define this to cause GDB to determine the address of @code{u} at
+runtime, by using HP-style @code{nlist} on the kernel's image in the
+root directory.
 
-This macro determines the target PC address that longjmp() will jump
-to, assuming that we have just stopped at a longjmp breakpoint.  It
-takes a CORE_ADDR * as argument, and stores the target PC value through
-this pointer.  It examines the current state of the machine as needed.
+@item ONE_PROCESS_WRITETEXT
+Define this to be able to, when a breakpoint insertion fails, warn the
+user that another process may be running with the same executable.
 
 @item PROC_NAME_FMT
 Defines the format for the name of a @file{/proc} device.  Should be
@@ -2488,43 +1888,53 @@ definition in @file{procfs.c}.
 mach386-xdep.c
 
 @item PTRACE_ARG3_TYPE
-The type of the third argument to the @code{ptrace} system call, if it exists
-and is different from @code{int}.
+The type of the third argument to the @code{ptrace} system call, if it
+exists and is different from @code{int}.
 
 @item REGISTER_U_ADDR
-Defines the offset of the registers in the ``u area''; @pxref{Host}.
+Defines the offset of the registers in the ``u area''.
+
+@item SHELL_COMMAND_CONCAT
+If defined, is a string to prefix on the shell command used to start the
+inferior.
+
+@item SHELL_FILE
+If defined, this is the name of the shell to use to run the inferior.
+Defaults to @code{"/bin/sh"}.
 
 @item SOLIB_ADD (filename, from_tty, targ)
-Define this to expand into an expression that will cause the symbols
-in @var{filename} to be added to GDB's symbol table.
+Define this to expand into an expression that will cause the symbols in
+@var{filename} to be added to GDB's symbol table.
 
 @item SOLIB_CREATE_INFERIOR_HOOK
-Define this to expand into any shared-library-relocation code
-that you want to be run just after the child process has been forked.
+Define this to expand into any shared-library-relocation code that you
+want to be run just after the child process has been forked.
 
 @item START_INFERIOR_TRAPS_EXPECTED
-When starting an inferior, GDB normally expects to trap twice;
-once when the shell execs, and once when the program itself execs.
-If the actual number of traps is something other than 2, then
-define this macro to expand into the number expected.
+When starting an inferior, GDB normally expects to trap twice; once when
+the shell execs, and once when the program itself execs.  If the actual
+number of traps is something other than 2, then define this macro to
+expand into the number expected.
+
+@item SVR4_SHARED_LIBS
+Define this to indicate that SVR4-style shared libraries are in use.
 
 @item USE_PROC_FS
 This determines whether small routines in @file{*-tdep.c}, which
-translate register values
-between GDB's internal representation and the /proc representation,
-are compiled.
+translate register values between GDB's internal representation and the
+/proc representation, are compiled.
 
 @item U_REGS_OFFSET
 This is the offset of the registers in the upage.  It need only be
 defined if the generic ptrace register access routines in
-@file{infptrace.c} are being used (that is,
-@file{infptrace.c} is configured in, and
-@code{FETCH_INFERIOR_REGISTERS} is not defined).  If the default value
-from @file{infptrace.c} is good enough, leave it undefined.
+@file{infptrace.c} are being used (that is, @file{infptrace.c} is
+configured in, and @code{FETCH_INFERIOR_REGISTERS} is not defined).  If
+the default value from @file{infptrace.c} is good enough, leave it
+undefined.
 
-The default value means that u.u_ar0 @emph{points to} the location of the
-registers.  I'm guessing that @code{#define U_REGS_OFFSET 0} means that
-u.u_ar0 @emph{is} the location of the registers.
+The default value means that u.u_ar0 @emph{points to} the location of
+the registers.  I'm guessing that @code{#define U_REGS_OFFSET 0} means
+that u.u_ar0 @emph{is} the location of the registers.
 
 @item CLEAR_SOLIB
 objfiles.c
@@ -2534,13 +1944,585 @@ Define this to debug ptrace calls.
 
 @end table
 
-@node Obsolete Conditionals
-@chapter Obsolete Conditionals
+
+@node Support Libraries
+
+@chapter Support Libraries
+
+@section BFD
+
+BFD provides support for GDB in several ways:
+
+@table @emph
+
+@item identifying executable and core files
+BFD will identify a variety of file types, including a.out, coff, and
+several variants thereof, as well as several kinds of core files.
+
+@item access to sections of files
+BFD parses the file headers to determine the names, virtual addresses,
+sizes, and file locations of all the various named sections in files
+(such as the text section or the data section).  GDB simply calls BFD to
+read or write section X at byte offset Y for length Z.
+
+@item specialized core file support
+BFD provides routines to determine the failing command name stored in a
+core file, the signal with which the program failed, and whether a core
+file matches (i.e. could be a core dump of) a particular executable
+file.
+
+@item locating the symbol information
+GDB uses an internal interface of BFD to determine where to find the
+symbol information in an executable file or symbol-file.  GDB itself
+handles the reading of symbols, since BFD does not ``understand'' debug
+symbols, but GDB uses BFD's cached information to find the symbols,
+string table, etc.
+
+@end table
+
+@section opcodes
+
+The opcodes library provides GDB's disassembler.  (It's a separate
+library because it's also used in binutils, for @file{objdump}).
+
+@section readline
+
+@section mmalloc
+
+@section libiberty
+
+@section gnu-regex
+
+Regex conditionals.
+
+@table @code
+
+@item C_ALLOCA
+
+@item NFAILURES
+
+@item RE_NREGS
+
+@item SIGN_EXTEND_CHAR
+
+@item SWITCH_ENUM_BUG
+
+@item SYNTAX_TABLE
+
+@item Sword
+
+@item sparc
+
+@end table
+
+@section include
+
+@node Coding
+
+@chapter Coding
+
+This chapter covers topics that are lower-level than the major
+algorithms of GDB.
+
+@section Cleanups
+
+Cleanups are a structured way to deal with things that need to be done
+later.  When your code does something (like @code{malloc} some memory,
+or open a file) that needs to be undone later (e.g. free the memory or
+close the file), it can make a cleanup.  The cleanup will be done at
+some future point: when the command is finished, when an error occurs,
+or when your code decides it's time to do cleanups.
+
+You can also discard cleanups, that is, throw them away without doing
+what they say.  This is only done if you ask that it be done.
+
+Syntax:
+
+@table @code
+
+@item struct cleanup *@var{old_chain};
+Declare a variable which will hold a cleanup chain handle.
+
+@item @var{old_chain} = make_cleanup (@var{function}, @var{arg});
+Make a cleanup which will cause @var{function} to be called with
+@var{arg} (a @code{char *}) later.  The result, @var{old_chain}, is a
+handle that can be passed to @code{do_cleanups} or
+@code{discard_cleanups} later.  Unless you are going to call
+@code{do_cleanups} or @code{discard_cleanups} yourself, you can ignore
+the result from @code{make_cleanup}.
+
+@item do_cleanups (@var{old_chain});
+Perform all cleanups done since @code{make_cleanup} returned
+@var{old_chain}.  E.g.:
+@example
+make_cleanup (a, 0); 
+old = make_cleanup (b, 0); 
+do_cleanups (old);
+@end example
+@noindent
+will call @code{b()} but will not call @code{a()}.  The cleanup that
+calls @code{a()} will remain in the cleanup chain, and will be done
+later unless otherwise discarded.@refill
+
+@item discard_cleanups (@var{old_chain});
+Same as @code{do_cleanups} except that it just removes the cleanups from
+the chain and does not call the specified functions.
+
+@end table
+
+Some functions, e.g. @code{fputs_filtered()} or @code{error()}, specify
+that they ``should not be called when cleanups are not in place''.  This
+means that any actions you need to reverse in the case of an error or
+interruption must be on the cleanup chain before you call these
+functions, since they might never return to your code (they
+@samp{longjmp} instead).
+
+@section Wrapping Output Lines
+
+Output that goes through @code{printf_filtered} or @code{fputs_filtered}
+or @code{fputs_demangled} needs only to have calls to @code{wrap_here}
+added in places that would be good breaking points.  The utility
+routines will take care of actually wrapping if the line width is
+exceeded.
+
+The argument to @code{wrap_here} is an indentation string which is
+printed @emph{only} if the line breaks there.  This argument is saved
+away and used later.  It must remain valid until the next call to
+@code{wrap_here} or until a newline has been printed through the
+@code{*_filtered} functions.  Don't pass in a local variable and then
+return!
+
+It is usually best to call @code{wrap_here()} after printing a comma or
+space.  If you call it before printing a space, make sure that your
+indentation properly accounts for the leading space that will print if
+the line wraps there.
+
+Any function or set of functions that produce filtered output must
+finish by printing a newline, to flush the wrap buffer, before switching
+to unfiltered (``@code{printf}'') output.  Symbol reading routines that
+print warnings are a good example.
+
+@section Coding Style
+
+GDB follows the GNU coding standards, as described in
+@file{etc/standards.texi}.  This file is also available for anonymous
+FTP from GNU archive sites.  There are some additional considerations
+for GDB maintainers that reflect the unique environment and style of GDB
+maintenance.  If you follow these guidelines, GDB will be more
+consistent and easier to maintain.
+
+GDB's policy on the use of prototypes is that prototypes are used to
+@emph{declare} functions but never to @emph{define} them.  Simple macros
+are used in the declarations, so that a non-ANSI compiler can compile
+GDB without trouble.  The simple macro calls are used like this:
+
+@example @code
+extern int memory_remove_breakpoint PARAMS ((CORE_ADDR, char *));
+@end example
+
+Note the double parentheses around the parameter types.  This allows an
+arbitrary number of parameters to be described, without freaking out the
+C preprocessor.  When the function has no parameters, it should be
+described like:
+
+@example @code
+void noprocess PARAMS ((void));
+@end example
+
+The @code{PARAMS} macro expands to its argument in ANSI C, or to a
+simple @code{()} in traditional C.
+
+All external functions should have a @code{PARAMS} declaration in a
+header file that callers include.  All static functions should have such
+a declaration near the top of their source file.
+
+We don't have a gcc option that will properly check that these rules
+have been followed, but it's GDB policy, and we periodically check it
+using the tools available (plus manual labor), and clean up any
+remnants.
+
+@section Clean Design
+
+In addition to getting the syntax right, there's the little question of
+semantics.  Some things are done in certain ways in GDB because long
+experience has shown that the more obvious ways caused various kinds of
+trouble.
+
+You can't assume the byte order of anything that comes from a target
+(including @var{value}s, object files, and instructions).  Such things
+must be byte-swapped using @code{SWAP_TARGET_AND_HOST} in GDB, or one of
+the swap routines defined in @file{bfd.h}, such as @code{bfd_get_32}.
+
+You can't assume that you know what interface is being used to talk to
+the target system.  All references to the target must go through the
+current @code{target_ops} vector.
+
+You can't assume that the host and target machines are the same machine
+(except in the ``native'' support modules).  In particular, you can't
+assume that the target machine's header files will be available on the
+host machine.  Target code must bring along its own header files --
+written from scratch or explicitly donated by their owner, to avoid
+copyright problems.
+
+Insertion of new @code{#ifdef}'s will be frowned upon.  It's much better
+to write the code portably than to conditionalize it for various
+systems.
+
+New @code{#ifdef}'s which test for specific compilers or manufacturers
+or operating systems are unacceptable.  All @code{#ifdef}'s should test
+for features.  The information about which configurations contain which
+features should be segregated into the configuration files.  Experience
+has proven far too often that a feature unique to one particular system
+often creeps into other systems; and that a conditional based on some
+predefined macro for your current system will become worthless over
+time, as new versions of your system come out that behave differently
+with regard to this feature.
+
+Adding code that handles specific architectures, operating systems,
+target interfaces, or hosts, is not acceptable in generic code.  If a
+hook is needed at that point, invent a generic hook and define it for
+your configuration, with something like:
+
+@example
+#ifdef	WRANGLE_SIGNALS
+   WRANGLE_SIGNALS (signo);
+#endif
+@end example
+
+In your host, target, or native configuration file, as appropriate,
+define @code{WRANGLE_SIGNALS} to do the machine-dependent thing.  Take a
+bit of care in defining the hook, so that it can be used by other ports
+in the future, if they need a hook in the same place.
+
+If the hook is not defined, the code should do whatever "most" machines
+want.  Using @code{#ifdef}, as above, is the preferred way to do this,
+but sometimes that gets convoluted, in which case use
+
+@example
+#ifndef SPECIAL_FOO_HANDLING
+#define SPECIAL_FOO_HANDLING(pc, sp) (0)
+#endif
+@end example
+
+where the macro is used or in an appropriate header file.
+
+Whether to include a @dfn{small} hook, a hook around the exact pieces of
+code which are system-dependent, or whether to replace a whole function
+with a hook depends on the case.  A good example of this dilemma can be
+found in @code{get_saved_register}.  All machines that GDB 2.8 ran on
+just needed the @code{FRAME_FIND_SAVED_REGS} hook to find the saved
+registers.  Then the SPARC and Pyramid came along, and
+@code{HAVE_REGISTER_WINDOWS} and @code{REGISTER_IN_WINDOW_P} were
+introduced.  Then the 29k and 88k required the @code{GET_SAVED_REGISTER}
+hook.  The first three are examples of small hooks; the latter replaces
+a whole function.  In this specific case, it is useful to have both
+kinds; it would be a bad idea to replace all the uses of the small hooks
+with @code{GET_SAVED_REGISTER}, since that would result in much
+duplicated code.  Other times, duplicating a few lines of code here or
+there is much cleaner than introducing a large number of small hooks.
+
+Another way to generalize GDB along a particular interface is with an
+attribute struct.  For example, GDB has been generalized to handle
+multiple kinds of remote interfaces -- not by #ifdef's everywhere, but
+by defining the "target_ops" structure and having a current target (as
+well as a stack of targets below it, for memory references).  Whenever
+something needs to be done that depends on which remote interface we are
+using, a flag in the current target_ops structure is tested (e.g.
+`target_has_stack'), or a function is called through a pointer in the
+current target_ops structure.  In this way, when a new remote interface
+is added, only one module needs to be touched -- the one that actually
+implements the new remote interface.  Other examples of
+attribute-structs are BFD access to multiple kinds of object file
+formats, or GDB's access to multiple source languages.
+
+Please avoid duplicating code.  For example, in GDB 3.x all the code
+interfacing between @code{ptrace} and the rest of GDB was duplicated in
+@file{*-dep.c}, and so changing something was very painful.  In GDB 4.x,
+these have all been consolidated into @file{infptrace.c}.
+@file{infptrace.c} can deal with variations between systems the same way
+any system-independent file would (hooks, #if defined, etc.), and
+machines which are radically different don't need to use infptrace.c at
+all.
+
+@emph{Do} write code that doesn't depend on the sizes of C data types,
+the format of the host's floating point numbers, the alignment of anything,
+or the order of evaluation of expressions.  In short, follow good 
+programming practices for writing portable C code.
+
+
+@node Porting GDB
+
+@chapter Porting GDB
+
+Most of the work in making GDB compile on a new machine is in specifying
+the configuration of the machine.  This is done in a dizzying variety of
+header files and configuration scripts, which we hope to make more
+sensible soon.  Let's say your new host is called an @var{xyz} (e.g.
+@samp{sun4}), and its full three-part configuration name is
+@code{@var{arch}-@var{xvend}-@var{xos}} (e.g.  @samp{sparc-sun-sunos4}).
+In particular:
+
+In the top level directory, edit @file{config.sub} and add @var{arch},
+@var{xvend}, and @var{xos} to the lists of supported architectures,
+vendors, and operating systems near the bottom of the file.  Also, add
+@var{xyz} as an alias that maps to
+@code{@var{arch}-@var{xvend}-@var{xos}}.  You can test your changes by
+running
+
+@example
+./config.sub @var{xyz}
+@end example
+@noindent
+and
+@example
+./config.sub @code{@var{arch}-@var{xvend}-@var{xos}}
+@end example
+@noindent
+which should both respond with @code{@var{arch}-@var{xvend}-@var{xos}}
+and no error messages.
+
+You need to port BFD, if that hasn't been done already.  Porting BFD is
+beyond the scope of this manual.
+
+To configure GDB itself, edit @file{gdb/configure.host} to recognize
+your system and set @code{gdb_host} to @var{xyz}, and (unless your
+desired target is already available) also edit @file{gdb/configure.tgt},
+setting @code{gdb_target} to something appropriate (for instance,
+@var{xyz}).
+
+Finally, you'll need to specify and define GDB's host-, native-, and
+target-dependent @file{.h} and @file{.c} files used for your
+configuration.
+
+@section Configuring GDB for Release
+
+From the top level directory (containing @file{gdb}, @file{bfd},
+@file{libiberty}, and so on):
+@example
+make -f Makefile.in gdb.tar.gz
+@end example
+
+This will properly configure, clean, rebuild any files that are
+distributed pre-built (e.g. @file{c-exp.tab.c} or @file{refcard.ps}),
+and will then make a tarfile.  (If the top level directory has already
+been configured, you can just do @code{make gdb.tar.gz} instead.)
+
+This procedure requires:
+@itemize @bullet
+@item symbolic links
+@item @code{makeinfo} (texinfo2 level)
+@item @TeX{}
+@item @code{dvips}
+@item @code{yacc} or @code{bison}
+@end itemize
+@noindent
+@dots{} and the usual slew of utilities (@code{sed}, @code{tar}, etc.).
+
+@subheading TEMPORARY RELEASE PROCEDURE FOR DOCUMENTATION
+
+@file{gdb.texinfo} is currently marked up using the texinfo-2 macros,
+which are not yet a default for anything (but we have to start using
+them sometime).
+
+For making paper, the only thing this implies is the right generation of
+@file{texinfo.tex} needs to be included in the distribution.
+
+For making info files, however, rather than duplicating the texinfo2
+distribution, generate @file{gdb-all.texinfo} locally, and include the
+files @file{gdb.info*} in the distribution.  Note the plural;
+@code{makeinfo} will split the document into one overall file and five
+or so included files.
+
+@node Hints
+
+@chapter Hints
+
+Check the @file{README} file, it often has useful information that does not
+appear anywhere else in the directory.
+
+@menu
+* Getting Started::		Getting started working on GDB
+* Debugging GDB::		Debugging GDB with itself
+@end menu
+
+@node Getting Started,,, Hints
+
+@section Getting Started
+
+GDB is a large and complicated program, and if you first starting to
+work on it, it can be hard to know where to start.  Fortunately, if you
+know how to go about it, there are ways to figure out what is going on.
+
+This manual, the GDB Internals manual, has information which applies
+generally to many parts of GDB.
+
+Information about particular functions or data structures are located in
+comments with those functions or data structures.  If you run across a
+function or a global variable which does not have a comment correctly
+explaining what is does, this can be thought of as a bug in GDB; feel
+free to submit a bug report, with a suggested comment if you can figure
+out what the comment should say.  If you find a comment which is
+actually wrong, be especially sure to report that.
+
+Comments explaining the function of macros defined in host, target, or
+native dependent files can be in several places.  Sometimes they are
+repeated every place the macro is defined.  Sometimes they are where the
+macro is used.  Sometimes there is a header file which supplies a
+default definition of the macro, and the comment is there.  This manual
+also documents all the available macros.
+@c (@pxref{Host Conditionals}, @pxref{Target
+@c Conditionals}, @pxref{Native Conditionals}, and @pxref{Obsolete
+@c Conditionals})
+
+Start with the header files.  Once you some idea of how GDB's internal
+symbol tables are stored (see @file{symtab.h}, @file{gdbtypes.h}), you
+will find it much easier to understand the code which uses and creates
+those symbol tables.
+
+You may wish to process the information you are getting somehow, to
+enhance your understanding of it.  Summarize it, translate it to another
+language, add some (perhaps trivial or non-useful) feature to GDB, use
+the code to predict what a test case would do and write the test case
+and verify your prediction, etc.  If you are reading code and your eyes
+are starting to glaze over, this is a sign you need to use a more active
+approach.
+
+Once you have a part of GDB to start with, you can find more
+specifically the part you are looking for by stepping through each
+function with the @code{next} command.  Do not use @code{step} or you
+will quickly get distracted; when the function you are stepping through
+calls another function try only to get a big-picture understanding
+(perhaps using the comment at the beginning of the function being
+called) of what it does.  This way you can identify which of the
+functions being called by the function you are stepping through is the
+one which you are interested in.  You may need to examine the data
+structures generated at each stage, with reference to the comments in
+the header files explaining what the data structures are supposed to
+look like.
+
+Of course, this same technique can be used if you are just reading the
+code, rather than actually stepping through it.  The same general
+principle applies---when the code you are looking at calls something
+else, just try to understand generally what the code being called does,
+rather than worrying about all its details.
+
+A good place to start when tracking down some particular area is with a
+command which invokes that feature.  Suppose you want to know how
+single-stepping works.  As a GDB user, you know that the @code{step}
+command invokes single-stepping.  The command is invoked via command
+tables (see @file{command.h}); by convention the function which actually
+performs the command is formed by taking the name of the command and
+adding @samp{_command}, or in the case of an @code{info} subcommand,
+@samp{_info}.  For example, the @code{step} command invokes the
+@code{step_command} function and the @code{info display} command invokes
+@code{display_info}.  When this convention is not followed, you might
+have to use @code{grep} or @kbd{M-x tags-search} in emacs, or run GDB on
+itself and set a breakpoint in @code{execute_command}.
+
+If all of the above fail, it may be appropriate to ask for information
+on @code{bug-gdb}.  But @emph{never} post a generic question like ``I was
+wondering if anyone could give me some tips about understanding
+GDB''---if we had some magic secret we would put it in this manual.
+Suggestions for improving the manual are always welcome, of course.
+
+@node Debugging GDB,,,Hints
+
+@section Debugging GDB with itself
+
+If GDB is limping on your machine, this is the preferred way to get it
+fully functional.  Be warned that in some ancient Unix systems, like
+Ultrix 4.2, a program can't be running in one process while it is being
+debugged in another.  Rather than typing the command @code{@w{./gdb
+./gdb}}, which works on Suns and such, you can copy @file{gdb} to
+@file{gdb2} and then type @code{@w{./gdb ./gdb2}}.
+
+When you run GDB in the GDB source directory, it will read a
+@file{.gdbinit} file that sets up some simple things to make debugging
+gdb easier.  The @code{info} command, when executed without a subcommand
+in a GDB being debugged by gdb, will pop you back up to the top level
+gdb.  See @file{.gdbinit} for details.
+
+If you use emacs, you will probably want to do a @code{make TAGS} after
+you configure your distribution; this will put the machine dependent
+routines for your local machine where they will be accessed first by
+@kbd{M-.}
+
+Also, make sure that you've either compiled GDB with your local cc, or
+have run @code{fixincludes} if you are compiling with gcc.
+
+@section Submitting Patches
+
+Thanks for thinking of offering your changes back to the community of
+GDB users.  In general we like to get well designed enhancements.
+Thanks also for checking in advance about the best way to transfer the
+changes.
+
+The GDB maintainers will only install ``cleanly designed'' patches.  You
+may not always agree on what is clean design.
+@c @pxref{Coding Style}, @pxref{Clean Design}.
+
+If the maintainers don't have time to put the patch in when it arrives,
+or if there is any question about a patch, it goes into a large queue
+with everyone else's patches and bug reports.
+
+The legal issue is that to incorporate substantial changes requires a
+copyright assignment from you and/or your employer, granting ownership
+of the changes to the Free Software Foundation.  You can get the
+standard document for doing this by sending mail to
+@code{gnu@@prep.ai.mit.edu} and asking for it.  I recommend that people
+write in "All programs owned by the Free Software Foundation" as "NAME
+OF PROGRAM", so that changes in many programs (not just GDB, but GAS,
+Emacs, GCC, etc) can be contributed with only one piece of legalese
+pushed through the bureacracy and filed with the FSF.  I can't start
+merging changes until this paperwork is received by the FSF (their
+rules, which I follow since I maintain it for them).
+
+Technically, the easiest way to receive changes is to receive each
+feature as a small context diff or unidiff, suitable for "patch".
+Each message sent to me should include the changes to C code and
+header files for a single feature, plus ChangeLog entries for each
+directory where files were modified, and diffs for any changes needed
+to the manuals (gdb/doc/gdb.texi or gdb/doc/gdbint.texi).  If there
+are a lot of changes for a single feature, they can be split down
+into multiple messages.
+
+In this way, if I read and like the feature, I can add it to the
+sources with a single patch command, do some testing, and check it in.
+If you leave out the ChangeLog, I have to write one.  If you leave
+out the doc, I have to puzzle out what needs documenting.  Etc.
+
+The reason to send each change in a separate message is that I will
+not install some of the changes.  They'll be returned to you with
+questions or comments.  If I'm doing my job, my message back to you
+will say what you have to fix in order to make the change acceptable.
+The reason to have separate messages for separate features is so
+that other changes (which I @emph{am} willing to accept) can be installed
+while one or more changes are being reworked.  If multiple features
+are sent in a single message, I tend to not put in the effort to sort
+out the acceptable changes from the unacceptable, so none of the
+features get installed until all are acceptable.
+
+If this sounds painful or authoritarian, well, it is.  But I get a lot
+of bug reports and a lot of patches, and most of them don't get
+installed because I don't have the time to finish the job that the bug
+reporter or the contributor could have done.  Patches that arrive
+complete, working, and well designed, tend to get installed on the day
+they arrive.  The others go into a queue and get installed if and when
+I scan back over the queue -- which can literally take months
+sometimes.  It's in both our interests to make patch installation easy
+-- you get your changes installed, and I make some forward progress on
+GDB in a normal 12-hour day (instead of them having to wait until I
+have a 14-hour or 16-hour day to spend cleaning up patches before I
+can install them).
+
+Please send patches directly to the GDB maintainers at
+@code{gdb-patches@@cygnus.com}.
+
+@section Obsolete Conditionals
 
 Fragments of old code in GDB sometimes reference or set the following
-configuration macros.  They should not be used by new code, and
-old uses should be removed as those parts of the debugger are 
-otherwise touched.
+configuration macros.  They should not be used by new code, and old uses
+should be removed as those parts of the debugger are otherwise touched.
 
 @table @code
 
@@ -2555,24 +2537,18 @@ and deleted from all of GDB's config files.
 Any @file{@var{foo}-xdep.c} file that references STACK_END_ADDR
 is so old that it has never been converted to use BFD.  Now that's old!
 
-@end table
+@item PYRAMID_CONTROL_FRAME_DEBUGGING
+pyr-xdep.c
+@item PYRAMID_CORE
+pyr-xdep.c
+@item PYRAMID_PTRACE
+pyr-xdep.c
 
-@node XCOFF
-@chapter The XCOFF Object File Format
+@item REG_STACK_SEGMENT
+exec.c
 
-The IBM RS/6000 running AIX uses an object file format called xcoff.
-The COFF sections, symbols, and line numbers are used, but debugging
-symbols are dbx-style stabs whose strings are located in the
-@samp{.debug} section (rather than the string table).  For more
-information, @xref{Top,,,stabs,The Stabs Debugging Format}, and search
-for XCOFF.
+@end table
 
-The shared library scheme has a nice clean interface for figuring out
-what shared libraries are in use, but the catch is that everything which
-refers to addresses (symbol tables and breakpoints at least) needs to be
-relocated for both shared libraries and the main executable.  At least
-using the standard mechanism this can only be done once the program has
-been run (or the core file has been read).
 
 @contents
 @bye
diff --git a/gdb/top.c b/gdb/top.c
index 18be649..5d3c116 100644
--- a/gdb/top.c
+++ b/gdb/top.c
@@ -1447,7 +1447,15 @@ gdb_readline (prrompt)
 	}
 
       if (c == '\n')
+#ifndef CRLF_SOURCE_FILES
 	break;
+#else
+	{
+	  if (input_index > 0 && result[input_index - 1] == '\r')
+	    input_index--;
+	  break;
+	}
+#endif
 
       result[input_index++] = c;
       while (input_index >= result_size)
diff --git a/gdb/win32-nat.c b/gdb/win32-nat.c
index c1c6758..2110e6a 100644
--- a/gdb/win32-nat.c
+++ b/gdb/win32-nat.c
@@ -21,7 +21,7 @@
 
 /* by Steve Chamberlain, sac@cygnus.com */
 
-/* We assume we're being built with and will be used for cygwin32.  */
+/* We assume we're being built with and will be used for cygwin.  */
 
 #include "defs.h"
 #include "frame.h"		/* required by inferior.h */
@@ -50,6 +50,10 @@
 #include <sys/param.h>
 #include <unistd.h>
 
+/* The string sent by cygwin when it processes a signal.
+   FIXME: This should be in a cygwin include file. */
+#define CYGWIN_SIGNAL_STRING "cygwin: signal"
+
 #define CHECK(x) 	check (x, __FILE__,__LINE__)
 #define DEBUG_EXEC(x)	if (debug_exec)		printf x
 #define DEBUG_EVENTS(x)	if (debug_events)	printf x
@@ -60,18 +64,32 @@
 extern struct target_ops child_ops;
 
 static void child_stop PARAMS ((void));
+static int child_thread_alive PARAMS ((int));
+
+static int last_sig = 0;	/* Set if a signal was received from the
+				   debugged process */
 
-/* The most recently read context. Inspect ContextFlags to see what 
-   bits are valid. */
+/* Thread information structure used to track information that is
+   not available in gdb's thread structure. */
+typedef struct thread_info_struct
+{
+  struct thread_info_struct *next;
+  DWORD id;
+  HANDLE h;
+  char *name;
+  int suspend_count;
+  CONTEXT context;
+} thread_info;
 
-static CONTEXT context;
+static thread_info thread_head = {NULL};
 
 /* The process and thread handles for the above context. */
 
-static HANDLE current_process;
-static HANDLE current_thread;
-static int current_process_id;
-static int current_thread_id;
+static DEBUG_EVENT current_event;	/* The current debug event from
+					   WaitForDebugEvent */
+static HANDLE current_process_handle;	/* Currently executing process */
+static thread_info *current_thread;	/* Info on currently selected thread */
+static DWORD main_thread_id;		/* Thread ID of the main thread */
 
 /* Counts of things. */
 static int exception_count = 0;
@@ -86,9 +104,9 @@ static int debug_memory = 0;		/* show target memory accesses */
 static int debug_exceptions = 0;	/* show target exceptions */
 
 /* This vector maps GDB's idea of a register's number into an address
-   in the win32 exception context vector. 
+   in the win32 exception context vector.
 
-   It also contains the bit mask needed to load the register in question.  
+   It also contains the bit mask needed to load the register in question.
 
    One day we could read a reg, we could inspect the context we
    already have loaded, if it doesn't have the bit set that we need,
@@ -98,40 +116,33 @@ static int debug_exceptions = 0;	/* show target exceptions */
    the other regs of the group, and then we copy the info in and set
    out bit. */
 
-struct regmappings
-  {
-    char *incontext;
-    int mask;
-  };
-
-static const struct regmappings  mappings[] =
+#define context_offset(x) ((int)&(((CONTEXT *)NULL)->x))
+static const int mappings[] =
 {
-#ifdef i386
-  {(char *) &context.Eax, CONTEXT_INTEGER},
-  {(char *) &context.Ecx, CONTEXT_INTEGER},
-  {(char *) &context.Edx, CONTEXT_INTEGER},
-  {(char *) &context.Ebx, CONTEXT_INTEGER},
-  {(char *) &context.Esp, CONTEXT_CONTROL},
-  {(char *) &context.Ebp, CONTEXT_CONTROL},
-  {(char *) &context.Esi, CONTEXT_INTEGER},
-  {(char *) &context.Edi, CONTEXT_INTEGER},
-  {(char *) &context.Eip, CONTEXT_CONTROL},
-  {(char *) &context.EFlags, CONTEXT_CONTROL},
-  {(char *) &context.SegCs, CONTEXT_SEGMENTS},
-  {(char *) &context.SegSs, CONTEXT_SEGMENTS},
-  {(char *) &context.SegDs, CONTEXT_SEGMENTS},
-  {(char *) &context.SegEs, CONTEXT_SEGMENTS},
-  {(char *) &context.SegFs, CONTEXT_SEGMENTS},
-  {(char *) &context.SegGs, CONTEXT_SEGMENTS},
-  {&context.FloatSave.RegisterArea[0 * 10], CONTEXT_FLOATING_POINT},
-  {&context.FloatSave.RegisterArea[1 * 10], CONTEXT_FLOATING_POINT},
-  {&context.FloatSave.RegisterArea[2 * 10], CONTEXT_FLOATING_POINT},
-  {&context.FloatSave.RegisterArea[3 * 10], CONTEXT_FLOATING_POINT},
-  {&context.FloatSave.RegisterArea[4 * 10], CONTEXT_FLOATING_POINT},
-  {&context.FloatSave.RegisterArea[5 * 10], CONTEXT_FLOATING_POINT},
-  {&context.FloatSave.RegisterArea[6 * 10], CONTEXT_FLOATING_POINT},
-  {&context.FloatSave.RegisterArea[7 * 10], CONTEXT_FLOATING_POINT},
-#endif
+  context_offset(Eax),
+  context_offset(Ecx),
+  context_offset(Edx),
+  context_offset(Ebx),
+  context_offset(Esp),
+  context_offset(Ebp),
+  context_offset(Esi),
+  context_offset(Edi),
+  context_offset(Eip),
+  context_offset(EFlags),
+  context_offset(SegCs),
+  context_offset(SegSs),
+  context_offset(SegDs),
+  context_offset(SegEs),
+  context_offset(SegFs),
+  context_offset(SegGs),
+  context_offset(FloatSave.RegisterArea[0 * 10]),
+  context_offset(FloatSave.RegisterArea[1 * 10]),
+  context_offset(FloatSave.RegisterArea[2 * 10]),
+  context_offset(FloatSave.RegisterArea[3 * 10]),
+  context_offset(FloatSave.RegisterArea[4 * 10]),
+  context_offset(FloatSave.RegisterArea[5 * 10]),
+  context_offset(FloatSave.RegisterArea[6 * 10]),
+  context_offset(FloatSave.RegisterArea[7 * 10]),
 };
 
 /* This vector maps the target's idea of an exception (extracted
@@ -153,72 +164,199 @@ static const struct xlate_exception
   {EXCEPTION_SINGLE_STEP, TARGET_SIGNAL_TRAP},
   {-1, -1}};
 
-static void 
-check (BOOL ok, const char *file, int line)
+/* Find a thread record given a thread id.
+   If get_context then also retrieve the context for this
+   thread. */
+static thread_info *
+thread_rec (DWORD id, int get_context)
 {
-  if (!ok)
-    printf_filtered ("error return %s:%d was %d\n", file, line, GetLastError ());
+  thread_info *th;
+
+  for (th = &thread_head; (th = th->next) != NULL; )
+    if (th->id == id)
+      {
+	if (!th->suspend_count && get_context)
+	  {
+	    if (get_context > 0)
+	      th->suspend_count = SuspendThread (th->h) + 1;
+	    else if (get_context < 0)
+	      th->suspend_count = -1;
+
+	    th->context.ContextFlags = CONTEXT_DEBUGGER;
+	    GetThreadContext (th->h, &th->context);
+	  }
+	return th;
+      }
+
+  return NULL;
+}
+
+/* Add a thread to the thread list */
+static thread_info *
+child_add_thread(DWORD id, HANDLE h)
+{
+  thread_info *th;
+
+  if ((th = thread_rec (id, FALSE)))
+    return th;
+
+  th = (thread_info *) xmalloc (sizeof (*th));
+  memset(th, 0, sizeof (*th));
+  th->id = id;
+  th->h = h;
+  th->next = thread_head.next;
+  thread_head.next = th;
+  add_thread (id);
+  return th;
 }
 
+/* Clear out any old thread list and reintialize it to a
+   pristine state. */
 static void
-child_fetch_inferior_registers (int r)
+child_init_thread_list ()
 {
-  if (r < 0)
+  thread_info *th = &thread_head;
+
+  DEBUG_EVENTS (("gdb: child_init_thread_list\n"));
+  init_thread_list ();
+  while (th->next != NULL)
     {
-      for (r = 0; r < NUM_REGS; r++)
-	child_fetch_inferior_registers (r);
+      thread_info *here = th->next;
+      th->next = here->next;
+      (void) CloseHandle (here->h);
+      free (here);
     }
-  else
+}
+
+/* Delete a thread from the list of threads */
+static void
+child_delete_thread (DWORD id)
+{
+  thread_info *th;
+
+  if (info_verbose)
+    printf_unfiltered ("[Deleting %s]\n", target_pid_to_str (id));
+  delete_thread (id);
+
+  for (th = &thread_head;
+       th->next != NULL && th->next->id != id;
+       th = th->next)
+    continue;
+
+  if (th->next != NULL)
     {
-      supply_register (r, mappings[r].incontext);
+      thread_info *here = th->next;
+      th->next = here->next;
+      CloseHandle (here->h);
+      free (here);
     }
 }
 
 static void
-child_store_inferior_registers (int r)
+check (BOOL ok, const char *file, int line)
+{
+  if (!ok)
+    printf_filtered ("error return %s:%d was %d\n", file, line, GetLastError ());
+}
+
+static void
+do_child_fetch_inferior_registers (int r)
 {
-  if (r < 0)
+  if (r >= 0)
+    supply_register (r, ((char *) &current_thread->context) + mappings[r]);
+  else
     {
       for (r = 0; r < NUM_REGS; r++)
-	child_store_inferior_registers (r);
+	do_child_fetch_inferior_registers (r);
     }
+}
+
+static void
+child_fetch_inferior_registers (int r)
+{
+  current_thread = thread_rec (inferior_pid, TRUE);
+  do_child_fetch_inferior_registers (r);
+}
+
+static void
+do_child_store_inferior_registers (int r)
+{
+  if (r >= 0)
+    read_register_gen (r, ((char *) &current_thread->context) + mappings[r]);
   else
     {
-      read_register_gen (r, mappings[r].incontext);
+      for (r = 0; r < NUM_REGS; r++)
+	do_child_store_inferior_registers (r);
     }
 }
 
+/* Store a new register value into the current thread context */
+static void
+child_store_inferior_registers (int r)
+{
+  current_thread = thread_rec (inferior_pid, TRUE);
+  do_child_store_inferior_registers (r);
+}
 
 /* Wait for child to do something.  Return pid of child, or -1 in case
    of error; store status through argument pointer OURSTATUS.  */
 
 static int
-handle_load_dll (char *eventp)
+handle_load_dll (char *dummy)
 {
-  DEBUG_EVENT * event = (DEBUG_EVENT *)eventp;
+  LOAD_DLL_DEBUG_INFO * event = &current_event.u.LoadDll;
   DWORD dll_name_ptr;
   DWORD done;
+  char dll_buf[MAX_PATH + 1];
+  char *p, *dll_name = NULL, *dll_basename;
+  struct objfile *objfile;
+  MEMORY_BASIC_INFORMATION minfo;
+
+  dll_buf[0] = dll_buf[sizeof(dll_buf) - 1] = '\0';
+
+  /* The following code attempts to find the name of the dll by reading the
+     name from the processes memory.  Unfortunately it doesn't work right.
+     Doing this the "right way" for Windows is very difficult.  FIXME */
+#ifdef DOESNT_WORK
+  memset (&minfo, 0, sizeof minfo);
+  if (VirtualQueryEx (current_process_handle, (LPCVOID) event->lpBaseOfDll,
+		      &minfo, sizeof(minfo)) && minfo.BaseAddress) {
+      DWORD len;
+      IMAGE_DOS_HEADER *hmm0 = (IMAGE_DOS_HEADER *) minfo.BaseAddress;
+      HMODULE hmm = (HMODULE) (((DWORD) hmm0) + hmm0->e_lfanew);
+
+      if ((len = GetModuleFileName (hmm, dll_buf, MAX_PATH)))
+	{
+	  dll_name = dll_buf;
+	  dll_name[len] = '\0';
+	}
+  }
+#endif
 
-  ReadProcessMemory (current_process,
-		     (DWORD) event->u.LoadDll.lpImageName,
-		     (char *) &dll_name_ptr,
-		     sizeof (dll_name_ptr), &done);
-
-  /* See if we could read the address of a string, and that the 
-     address isn't null. */
-
-  if (done == sizeof (dll_name_ptr) && dll_name_ptr)
+  /* Attempt to read the name of the dll that was detected.
+     This is documented to work only when actively debugging
+     a program.  It will not work for attached processes. */
+  if (dll_name == NULL || *dll_name == '\0')
     {
-      char *dll_name, *dll_basename;
-      struct objfile *objfile;
-      char unix_dll_name[MAX_PATH];
-      int size = event->u.LoadDll.fUnicode ? sizeof (WCHAR) : sizeof (char);
+      int size = event->fUnicode ? sizeof (WCHAR) : sizeof (char);
       int len = 0;
       char b[2];
+
+      ReadProcessMemory (current_process_handle,
+			 (LPCVOID) event->lpImageName,
+			 (char *) &dll_name_ptr,
+			 sizeof (dll_name_ptr), &done);
+
+      /* See if we could read the address of a string, and that the
+	 address isn't null. */
+
+      if (done != sizeof (dll_name_ptr) || !dll_name_ptr)
+	return 1;
+
       do
 	{
-	  ReadProcessMemory (current_process,
-			     dll_name_ptr + len * size,
+	  ReadProcessMemory (current_process_handle,
+			     (LPCVOID) (dll_name_ptr + len * size),
 			     &b,
 			     size,
 			     &done);
@@ -228,11 +366,11 @@ handle_load_dll (char *eventp)
 
       dll_name = alloca (len);
 
-      if (event->u.LoadDll.fUnicode)
+      if (event->fUnicode)
 	{
 	  WCHAR *unicode_dll_name = (WCHAR *) alloca (len * sizeof (WCHAR));
-	  ReadProcessMemory (current_process,
-			     dll_name_ptr,
+	  ReadProcessMemory (current_process_handle,
+			     (LPCVOID) dll_name_ptr,
 			     unicode_dll_name,
 			     len * sizeof (WCHAR),
 			     &done);
@@ -243,211 +381,273 @@ handle_load_dll (char *eventp)
 	}
       else
 	{
-	  ReadProcessMemory (current_process,
-			     dll_name_ptr,
+	  ReadProcessMemory (current_process_handle,
+			     (LPCVOID) dll_name_ptr,
 			     dll_name,
 			     len,
 			     &done);
 	}
-
-      /* FIXME: Can we delete this call?  */
-      cygwin32_conv_to_posix_path (dll_name, unix_dll_name);
-
-      /* FIXME!! It would be nice to define one symbol which pointed to the 
-         front of the dll if we can't find any symbols. */
-
-       if (!(dll_basename = strrchr(dll_name, '\\')))
- 	dll_basename = strrchr(dll_name, '/');
- 
-       ALL_OBJFILES(objfile) 
- 	{
- 	  char *objfile_basename;
- 	  if (!(objfile_basename = strrchr(objfile->name, '\\')))
- 	    objfile_basename = strrchr(objfile->name, '/');
- 
- 	  if (dll_basename && objfile_basename &&
- 	      strcmp(dll_basename+1, objfile_basename+1) == 0)
- 	    {
- 	      printf_unfiltered ("%s (symbols previously loaded)\n", 
- 				 dll_basename + 1);
- 	      return 1;
- 	    }
- 	}
-
-      context.ContextFlags = CONTEXT_FULL | CONTEXT_FLOATING_POINT;
-      GetThreadContext (current_thread, &context);
-
-      /* The symbols in a dll are offset by 0x1000, which is the
-	 the offset from 0 of the first byte in an image - because
-	 of the file header and the section alignment. 
-	 
-	 FIXME: Is this the real reason that we need the 0x1000 ? */
-
-
-      symbol_file_add (unix_dll_name, 0,
-		       (int) event->u.LoadDll.lpBaseOfDll + 0x1000, 0, 0, 0);
-
-      printf_unfiltered ("%x:%s\n", event->u.LoadDll.lpBaseOfDll, 
-			 unix_dll_name);
     }
+
+  if (!dll_name)
+    return 1;
+
+  while ((p = strchr (dll_name, '\\')))
+    *p = '/';
+
+  /* FIXME!! It would be nice to define one symbol which pointed to the
+     front of the dll if we can't find any symbols. */
+
+  if (!(dll_basename = strrchr(dll_name, '/')))
+    dll_basename = dll_name;
+  else
+    dll_basename++;
+
+  ALL_OBJFILES(objfile)
+    {
+      char *objfile_basename;
+      objfile_basename = strrchr(objfile->name, '/');
+
+      if (objfile_basename &&
+	  strcmp(dll_basename, objfile_basename + 1) == 0)
+	{
+	  printf_unfiltered ("%x:%s (symbols previously loaded)\n",
+			     event->lpBaseOfDll, dll_name);
+	  goto out;
+	}
+  }
+
+  /* The symbols in a dll are offset by 0x1000, which is the
+     the offset from 0 of the first byte in an image - because
+     of the file header and the section alignment.
+
+     FIXME: Is this the real reason that we need the 0x1000 ? */
+
+  printf_unfiltered ("%x:%s", event->lpBaseOfDll, dll_name);
+  symbol_file_add (dll_name, 0, (int) event->lpBaseOfDll + 0x1000, 0, 0, 0);
+  printf_unfiltered ("\n");
+
+out:
   return 1;
 }
 
+/* Handle DEBUG_STRING output from child process.
+   Cygwin prepends its messages with a "cygwin:".  Interpret this as
+   a Cygwin signal.  Otherwise just print the string as a warning. */
+static int
+handle_output_debug_string (struct target_waitstatus *ourstatus)
+{
+  char *s;
+  int gotasig = FALSE;
+
+  if (!target_read_string
+      ((CORE_ADDR) current_event.u.DebugString.lpDebugStringData, &s, 1024, 0)
+      || !s || !*s)
+    return gotasig;
+
+  if (strncmp(s, CYGWIN_SIGNAL_STRING, sizeof(CYGWIN_SIGNAL_STRING) - 1))
+    {
+      warning (s);
+    }
+  else
+    {
+      char *p;
+      /*last_sig = */strtol(s + sizeof(CYGWIN_SIGNAL_STRING) - 1, &p, 0);
+      if (gotasig = (ourstatus->value.sig = target_signal_from_host (last_sig)))
+	ourstatus->kind = TARGET_WAITKIND_STOPPED;
+    }
+
+  free (s);
+  return gotasig;
+}
 
 static int
-handle_exception (DEBUG_EVENT * event, struct target_waitstatus *ourstatus)
+handle_exception (struct target_waitstatus *ourstatus)
 {
   int i;
   int done = 0;
+  thread_info *th;
+
   ourstatus->kind = TARGET_WAITKIND_STOPPED;
 
+  /* Record the context of the current thread */
+  th = thread_rec (current_event.dwThreadId, -1);
 
-  switch (event->u.Exception.ExceptionRecord.ExceptionCode) 
+  switch (current_event.u.Exception.ExceptionRecord.ExceptionCode)
     {
     case EXCEPTION_ACCESS_VIOLATION:
       DEBUG_EXCEPT (("gdb: Target exception ACCESS_VIOLATION at 0x%08x\n",
-		     event->u.Exception.ExceptionRecord.ExceptionAddress));
+		     current_event.u.Exception.ExceptionRecord.ExceptionAddress));
       ourstatus->value.sig = TARGET_SIGNAL_SEGV;
       break;
     case STATUS_STACK_OVERFLOW:
       DEBUG_EXCEPT (("gdb: Target exception STACK_OVERFLOW at 0x%08x\n",
-		     event->u.Exception.ExceptionRecord.ExceptionAddress));
+		     current_event.u.Exception.ExceptionRecord.ExceptionAddress));
       ourstatus->value.sig = TARGET_SIGNAL_SEGV;
       break;
     case EXCEPTION_BREAKPOINT:
       DEBUG_EXCEPT (("gdb: Target exception BREAKPOINT at 0x%08x\n",
-		     event->u.Exception.ExceptionRecord.ExceptionAddress));
+		     current_event.u.Exception.ExceptionRecord.ExceptionAddress));
       ourstatus->value.sig = TARGET_SIGNAL_TRAP;
       break;
     case DBG_CONTROL_C:
       DEBUG_EXCEPT (("gdb: Target exception CONTROL_C at 0x%08x\n",
-		     event->u.Exception.ExceptionRecord.ExceptionAddress));
+		     current_event.u.Exception.ExceptionRecord.ExceptionAddress));
       ourstatus->value.sig = TARGET_SIGNAL_INT;
+      /* User typed CTRL-C.  Continue with this status */
+      last_sig = SIGINT;	/* FIXME - should check pass state */
       break;
     case EXCEPTION_SINGLE_STEP:
       DEBUG_EXCEPT (("gdb: Target exception SINGLE_STEP at 0x%08x\n",
-		     event->u.Exception.ExceptionRecord.ExceptionAddress));
+		     current_event.u.Exception.ExceptionRecord.ExceptionAddress));
       ourstatus->value.sig = TARGET_SIGNAL_TRAP;
       break;
     default:
       /* This may be a structured exception handling exception.  In
-         that case, we want to let the program try to handle it, and
-         only break if we see the exception a second time.  */
-      if (event->u.Exception.dwFirstChance)
+	 that case, we want to let the program try to handle it, and
+	 only break if we see the exception a second time.  */
+      if (current_event.u.Exception.dwFirstChance)
 	return 0;
 
       printf_unfiltered ("gdb: unknown target exception 0x%08x at 0x%08x\n",
-			 event->u.Exception.ExceptionRecord.ExceptionCode,
-			 event->u.Exception.ExceptionRecord.ExceptionAddress);
+			 current_event.u.Exception.ExceptionRecord.ExceptionCode,
+			 current_event.u.Exception.ExceptionRecord.ExceptionAddress);
       ourstatus->value.sig = TARGET_SIGNAL_UNKNOWN;
       break;
     }
-  context.ContextFlags = CONTEXT_FULL | CONTEXT_FLOATING_POINT;
-  GetThreadContext (current_thread, &context);
   exception_count++;
   return 1;
 }
 
+/* Resume all artificially suspended threads if we are continuing
+   execution */
+static BOOL
+child_continue (DWORD continue_status, int id)
+{
+  int i;
+  thread_info *th;
+  BOOL res;
+
+  DEBUG_EVENTS (("ContinueDebugEvent (cpid=%d, ctid=%d, DBG_CONTINUE);\n",
+		 current_event.dwProcessId, current_event.dwThreadId));
+  if (res = ContinueDebugEvent (current_event.dwProcessId,
+				current_event.dwThreadId,
+			        continue_status))
+    for (th = &thread_head; (th = th->next) != NULL; )
+      if (((id == -1) || (id == th->id)) && th->suspend_count)
+	{
+	  for (i = 0; i < th->suspend_count; i++)
+	    (void) ResumeThread (th->h);
+	  th->suspend_count = 0;
+	}
+
+  return res;
+}
+
 static int
 child_wait (int pid, struct target_waitstatus *ourstatus)
 {
   /* We loop when we get a non-standard exception rather than return
      with a SPURIOUS because resume can try and step or modify things,
-     which needs a current_thread.  But some of these exceptions mark
+     which needs a current_thread->h.  But some of these exceptions mark
      the birth or death of threads, which mean that the current thread
      isn't necessarily what you think it is. */
 
   while (1)
     {
-      DEBUG_EVENT event;
-      BOOL t = WaitForDebugEvent (&event, INFINITE);
-      char *p;
       DWORD continue_status;
+      BOOL t = WaitForDebugEvent (&current_event, INFINITE);
+      char *p;
+      thread_info *th;
+      int sig;
 
       event_count++;
 
-      current_thread_id = event.dwThreadId;
-      current_process_id = event.dwProcessId;
-
       continue_status = DBG_CONTINUE;
 
-      switch (event.dwDebugEventCode)
+      switch (current_event.dwDebugEventCode)
 	{
 	case CREATE_THREAD_DEBUG_EVENT:
-	  DEBUG_EVENTS (("gdb: kernel event for pid=%d tid=%d code=%s)\n", 
-			event.dwProcessId, event.dwThreadId,
+	  DEBUG_EVENTS (("gdb: kernel event for pid=%d tid=%x code=%s)\n",
+			current_event.dwProcessId, current_event.dwThreadId,
 			"CREATE_THREAD_DEBUG_EVENT"));
+	  /* Record the existence of this thread */
+	  child_add_thread (current_event.dwThreadId,
+			    current_event.u.CreateThread.hThread);
+	  if (info_verbose)
+	      printf_unfiltered ("[New %s]\n",
+			       target_pid_to_str (current_event.dwThreadId));
 	  break;
+
 	case EXIT_THREAD_DEBUG_EVENT:
 	  DEBUG_EVENTS (("gdb: kernel event for pid=%d tid=%d code=%s)\n",
-			event.dwProcessId, event.dwThreadId,
+			current_event.dwProcessId, current_event.dwThreadId,
 			"EXIT_THREAD_DEBUG_EVENT"));
+	  child_delete_thread (current_event.dwThreadId);
 	  break;
+
 	case CREATE_PROCESS_DEBUG_EVENT:
 	  DEBUG_EVENTS (("gdb: kernel event for pid=%d tid=%d code=%s)\n",
-			event.dwProcessId, event.dwThreadId,
+			current_event.dwProcessId, current_event.dwThreadId,
 			"CREATE_PROCESS_DEBUG_EVENT"));
+	  current_process_handle = current_event.u.CreateProcessInfo.hProcess;
+
+	  main_thread_id = inferior_pid = current_event.dwThreadId;
+	  /* Add the main thread */
+	  current_thread = child_add_thread (inferior_pid,
+				current_event.u.CreateProcessInfo.hThread);
 	  break;
 
 	case EXIT_PROCESS_DEBUG_EVENT:
 	  DEBUG_EVENTS (("gdb: kernel event for pid=%d tid=%d code=%s)\n",
-			event.dwProcessId, event.dwThreadId,
+			current_event.dwProcessId, current_event.dwThreadId,
 			"EXIT_PROCESS_DEBUG_EVENT"));
 	  ourstatus->kind = TARGET_WAITKIND_EXITED;
-	  ourstatus->value.integer = event.u.ExitProcess.dwExitCode;
-	  CloseHandle (current_process);
-	  CloseHandle (current_thread);
-	  return current_process_id;
+	  ourstatus->value.integer = current_event.u.ExitProcess.dwExitCode;
+	  CloseHandle (current_process_handle);
+	  return current_event.dwProcessId;
 	  break;
 
 	case LOAD_DLL_DEBUG_EVENT:
 	  DEBUG_EVENTS (("gdb: kernel event for pid=%d tid=%d code=%s)\n",
-			event.dwProcessId, event.dwThreadId,
+			current_event.dwProcessId, current_event.dwThreadId,
 			"LOAD_DLL_DEBUG_EVENT"));
-	  catch_errors (handle_load_dll,
-			(char*) &event,
-			"\n[failed reading symbols from DLL]\n",
-			RETURN_MASK_ALL);
+          catch_errors (handle_load_dll, NULL, "", RETURN_MASK_ALL);
 	  registers_changed();          /* mark all regs invalid */
 	  break;
+
 	case UNLOAD_DLL_DEBUG_EVENT:
 	  DEBUG_EVENTS (("gdb: kernel event for pid=%d tid=%d code=%s)\n",
-			event.dwProcessId, event.dwThreadId,
+			current_event.dwProcessId, current_event.dwThreadId,
 			"UNLOAD_DLL_DEBUG_EVENT"));
 	  break;	/* FIXME: don't know what to do here */
-  	case EXCEPTION_DEBUG_EVENT:
+
+	case EXCEPTION_DEBUG_EVENT:
 	  DEBUG_EVENTS (("gdb: kernel event for pid=%d tid=%d code=%s)\n",
-			event.dwProcessId, event.dwThreadId,
+			current_event.dwProcessId, current_event.dwThreadId,
 			"EXCEPTION_DEBUG_EVENT"));
-	  if (handle_exception (&event, ourstatus))
-	    return current_process_id;
+	  if (handle_exception (ourstatus))
+	    return current_event.dwThreadId;
 	  continue_status = DBG_EXCEPTION_NOT_HANDLED;
 	  break;
 
 	case OUTPUT_DEBUG_STRING_EVENT: /* message from the kernel */
 	  DEBUG_EVENTS (("gdb: kernel event for pid=%d tid=%d code=%s)\n",
-			event.dwProcessId, event.dwThreadId,
+			current_event.dwProcessId, current_event.dwThreadId,
 			"OUTPUT_DEBUG_STRING_EVENT"));
-	  if (target_read_string
-	      ((CORE_ADDR) event.u.DebugString.lpDebugStringData, 
-	       &p, 1024, 0) && p && *p)
-	    {
-	      warning(p);
-	      free(p);
-	    }
+	  if (handle_output_debug_string (ourstatus))
+	    return main_thread_id;
 	  break;
 	default:
 	  printf_unfiltered ("gdb: kernel event for pid=%d tid=%d\n",
-			     event.dwProcessId, event.dwThreadId);
+			     current_event.dwProcessId,
+			     current_event.dwThreadId);
 	  printf_unfiltered ("                 unknown event code %d\n",
-			     event.dwDebugEventCode);
+			     current_event.dwDebugEventCode);
 	  break;
 	}
-      DEBUG_EVENTS (("ContinueDebugEvent (cpid=%d, ctid=%d, DBG_CONTINUE);\n",
-		     current_process_id, current_thread_id));
-      CHECK (ContinueDebugEvent (current_process_id,
-				 current_thread_id,
-				 continue_status));
+
+      CHECK (child_continue (continue_status, -1));
     }
 }
 
@@ -463,9 +663,9 @@ child_attach (args, from_tty)
   if (!args)
     error_no_arg ("process-id to attach");
 
-  current_process_id = strtoul (args, 0, 0);
+  current_event.dwProcessId = strtoul (args, 0, 0);
 
-  ok = DebugActiveProcess (current_process_id);
+  ok = DebugActiveProcess (current_event.dwProcessId);
 
   if (!ok)
     error ("Can't attach to process.");
@@ -479,15 +679,14 @@ child_attach (args, from_tty)
 
       if (exec_file)
 	printf_unfiltered ("Attaching to program `%s', %s\n", exec_file,
-			   target_pid_to_str (current_process_id));
+			   target_pid_to_str (current_event.dwProcessId));
       else
 	printf_unfiltered ("Attaching to %s\n",
-			   target_pid_to_str (current_process_id));
+			   target_pid_to_str (current_event.dwProcessId));
 
       gdb_flush (gdb_stdout);
     }
 
-  inferior_pid = current_process_id;
   push_target (&child_ops);
 }
 
@@ -560,9 +759,9 @@ child_create_inferior (exec_file, allargs, env)
   memset (&si, 0, sizeof (si));
   si.cb = sizeof (si);
 
-  cygwin32_conv_to_win32_path (exec_file, real_path);
+  cygwin_conv_to_win32_path (exec_file, real_path);
 
-  flags = DEBUG_ONLY_THIS_PROCESS; 
+  flags = DEBUG_ONLY_THIS_PROCESS;
 
   if (new_group)
     flags |= CREATE_NEW_PROCESS_GROUP;
@@ -606,9 +805,9 @@ child_create_inferior (exec_file, allargs, env)
 	    len = strlen (conv_path_names[j]);
 	    if (strncmp (conv_path_names[j], env[i], len) == 0)
 	      {
-		if (cygwin32_posix_path_list_p (env[i] + len))
+		if (cygwin_posix_path_list_p (env[i] + len))
 		  envlen += len
-		    + cygwin32_posix_to_win32_path_list_buf_size (env[i] + len);
+		    + cygwin_posix_to_win32_path_list_buf_size (env[i] + len);
 		else
 		  envlen += strlen (env[i]) + 1;
 		break;
@@ -621,7 +820,7 @@ child_create_inferior (exec_file, allargs, env)
     winenv = alloca (envlen + 1);
 
     /* Copy env strings into new buffer.  */
-    for (temp = winenv, i = 0; env[i] && *env[i]; i++) 
+    for (temp = winenv, i = 0; env[i] && *env[i]; i++)
       {
 	int j, len;
 
@@ -630,10 +829,10 @@ child_create_inferior (exec_file, allargs, env)
 	    len = strlen (conv_path_names[j]);
 	    if (strncmp (conv_path_names[j], env[i], len) == 0)
 	      {
-		if (cygwin32_posix_path_list_p (env[i] + len))
+		if (cygwin_posix_path_list_p (env[i] + len))
 		  {
 		    memcpy (temp, env[i], len);
-		    cygwin32_posix_to_win32_path_list (env[i] + len, temp + len);
+		    cygwin_posix_to_win32_path_list (env[i] + len, temp + len);
 		  }
 		else
 		  strcpy (temp, env[i]);
@@ -666,13 +865,12 @@ child_create_inferior (exec_file, allargs, env)
   exception_count = 0;
   event_count = 0;
 
-  inferior_pid = pi.dwProcessId;
-  current_process = pi.hProcess;
-  current_thread = pi.hThread;
-  current_process_id = pi.dwProcessId;
-  current_thread_id = pi.dwThreadId;
+  current_process_handle = pi.hProcess;
+  current_event.dwProcessId = pi.dwProcessId;
+  memset (&current_event, 0, sizeof (current_event));
+  inferior_pid = current_event.dwThreadId = pi.dwThreadId;
   push_target (&child_ops);
-  init_thread_list ();
+  child_init_thread_list ();
   init_wait_for_inferior ();
   clear_proceed_status ();
   target_terminal_init ();
@@ -687,9 +885,7 @@ child_create_inferior (exec_file, allargs, env)
 static void
 child_mourn_inferior ()
 {
-  (void) ContinueDebugEvent (current_process_id,
-			     current_thread_id,
-			     DBG_CONTINUE);
+  (void) child_continue (DBG_CONTINUE, -1);
   unpush_target (&child_ops);
   generic_mourn_inferior ();
 }
@@ -714,14 +910,16 @@ child_xfer_memory (CORE_ADDR memaddr, char *our, int len,
     {
       DEBUG_MEM (("gdb: write target memory, %d bytes at 0x%08x\n",
 		  len, memaddr));
-      WriteProcessMemory (current_process, memaddr, our, len, &done);
-      FlushInstructionCache (current_process, memaddr, len);
+      WriteProcessMemory (current_process_handle, (LPVOID) memaddr, our,
+			  len, &done);
+      FlushInstructionCache (current_process_handle, (LPCVOID) memaddr, len);
     }
   else
     {
       DEBUG_MEM (("gdb: read target memory, %d bytes at 0x%08x\n",
 		  len, memaddr));
-      ReadProcessMemory (current_process, memaddr, our, len, &done);
+      ReadProcessMemory (current_process_handle, (LPCVOID) memaddr, our, len,
+			 &done);
     }
   return done;
 }
@@ -729,59 +927,60 @@ child_xfer_memory (CORE_ADDR memaddr, char *our, int len,
 void
 child_kill_inferior (void)
 {
-  CHECK (TerminateProcess (current_process, 0));
-  
+  CHECK (TerminateProcess (current_process_handle, 0));
+
   for (;;)
     {
-      DEBUG_EVENT event;
-      if (!ContinueDebugEvent (current_process_id,
-			       current_thread_id,
-			       DBG_CONTINUE))
+      if (!child_continue (DBG_CONTINUE, -1))
 	break;
-      if (!WaitForDebugEvent (&event, INFINITE))
+      if (!WaitForDebugEvent (&current_event, INFINITE))
 	break;
-      current_thread_id = event.dwThreadId;
-      current_process_id = event.dwProcessId;
-      if (event.dwDebugEventCode == EXIT_PROCESS_DEBUG_EVENT)
+      if (current_event.dwDebugEventCode == EXIT_PROCESS_DEBUG_EVENT)
 	break;
     }
 
-  CHECK (CloseHandle (current_process));
-  CHECK (CloseHandle (current_thread));
+  CHECK (CloseHandle (current_process_handle));
+
+  /* this may fail in an attached process so don't check. */
+  (void) CloseHandle (current_thread->h);
   target_mourn_inferior();	/* or just child_mourn_inferior? */
 }
 
 void
-child_resume (int pid, int step, enum target_signal signal)
+child_resume (int pid, int step, enum target_signal sig)
 {
-  DEBUG_EXEC (("gdb: child_resume (pid=%d, step=%d, signal=%d);\n", 
-	       pid, step, signal));
+  int i;
+  thread_info *th;
+  DWORD continue_status = last_sig > 0 && last_sig < NSIG ?
+			  DBG_EXCEPTION_NOT_HANDLED : DBG_CONTINUE;
 
+  DEBUG_EXEC (("gdb: child_resume (pid=%d, step=%d, sig=%d);\n",
+	       pid, step, sig));
+
+  /* Get context for currently selected thread */
+  th = thread_rec (current_event.dwThreadId, FALSE);
   if (step)
     {
 #ifdef i386
       /* Single step by setting t bit */
       child_fetch_inferior_registers (PS_REGNUM);
-      context.EFlags |= FLAG_TRACE_BIT;
+      th->context.EFlags |= FLAG_TRACE_BIT;
 #endif
     }
 
-  if (context.ContextFlags)
+  if (th->context.ContextFlags)
     {
-      CHECK (SetThreadContext (current_thread, &context));
-      context.ContextFlags = 0;
+      CHECK (SetThreadContext (th->h, &th->context));
+      th->context.ContextFlags = 0;
     }
 
-  if (signal)
-    {
-      fprintf_unfiltered (gdb_stderr, "Can't send signals to the child.\n");
-    }
+  /* Allow continuing with the same signal that interrupted us.
+     Otherwise complain. */
+  if (sig && sig != last_sig)
+    fprintf_unfiltered (gdb_stderr, "Can't send signals to the child.  signal %d\n", sig);
 
-  DEBUG_EVENTS (("gdb: ContinueDebugEvent (cpid=%d, ctid=%d, DBG_CONTINUE);\n",
-		 current_process_id, current_thread_id));
-  CHECK (ContinueDebugEvent (current_process_id,
-			     current_thread_id,
-			     DBG_CONTINUE));
+  last_sig = 0;
+  child_continue (continue_status, pid);
 }
 
 static void
@@ -806,45 +1005,45 @@ struct target_ops child_ops ;
 
 static void init_child_ops(void)
 {
-  child_ops.to_shortname =   "child";			
+  child_ops.to_shortname =   "child";
   child_ops.to_longname =   "Win32 child process";
-  child_ops.to_doc =   "Win32 child process (started by the \"run\" command).";	
-  child_ops.to_open =   child_open;		
-  child_ops.to_close =   child_close;		
-  child_ops.to_attach =   child_attach;		
-  child_ops.to_detach =   child_detach;		
-  child_ops.to_resume =   child_resume;		
-  child_ops.to_wait  =   child_wait;		
+  child_ops.to_doc =   "Win32 child process (started by the \"run\" command).";
+  child_ops.to_open =   child_open;
+  child_ops.to_close =   child_close;
+  child_ops.to_attach =   child_attach;
+  child_ops.to_detach =   child_detach;
+  child_ops.to_resume =   child_resume;
+  child_ops.to_wait  =   child_wait;
   child_ops.to_fetch_registers  =   child_fetch_inferior_registers;
   child_ops.to_store_registers  =   child_store_inferior_registers;
-  child_ops.to_prepare_to_store =   child_prepare_to_store;	
-  child_ops.to_xfer_memory  =   child_xfer_memory;		
-  child_ops.to_files_info  =   child_files_info;		
+  child_ops.to_prepare_to_store =   child_prepare_to_store;
+  child_ops.to_xfer_memory  =   child_xfer_memory;
+  child_ops.to_files_info  =   child_files_info;
   child_ops.to_insert_breakpoint =   memory_insert_breakpoint;
   child_ops.to_remove_breakpoint =   memory_remove_breakpoint;
   child_ops.to_terminal_init  =   terminal_init_inferior;
-  child_ops.to_terminal_inferior =   terminal_inferior;	
+  child_ops.to_terminal_inferior =   terminal_inferior;
   child_ops.to_terminal_ours_for_output =   terminal_ours_for_output;
-  child_ops.to_terminal_ours  =   terminal_ours;	
-  child_ops.to_terminal_info  =   child_terminal_info;	
-  child_ops.to_kill  =   child_kill_inferior;	
-  child_ops.to_load  =   0;			
-  child_ops.to_lookup_symbol =   0;				
+  child_ops.to_terminal_ours  =   terminal_ours;
+  child_ops.to_terminal_info  =   child_terminal_info;
+  child_ops.to_kill  =   child_kill_inferior;
+  child_ops.to_load  =   0;
+  child_ops.to_lookup_symbol =   0;
   child_ops.to_create_inferior =   child_create_inferior;
-  child_ops.to_mourn_inferior =   child_mourn_inferior;	
-  child_ops.to_can_run  =   child_can_run;	
-  child_ops.to_notice_signals =   0;		
-  child_ops.to_thread_alive  =   0;		
-  child_ops.to_stop  =   child_stop;		
+  child_ops.to_mourn_inferior =   child_mourn_inferior;
+  child_ops.to_can_run  =   child_can_run;
+  child_ops.to_notice_signals =   0;
+  child_ops.to_thread_alive  =   child_thread_alive;
+  child_ops.to_stop  =   child_stop;
   child_ops.to_stratum =   process_stratum;
-  child_ops.DONT_USE =   0;		
-  child_ops.to_has_all_memory =   1;	
-  child_ops.to_has_memory =   1;	
-  child_ops.to_has_stack =   1;		
-  child_ops.to_has_registers =   1;	
-  child_ops.to_has_execution =   1;	
-  child_ops.to_sections =   0;		
-  child_ops.to_sections_end =   0;	
+  child_ops.DONT_USE =   0;
+  child_ops.to_has_all_memory =   1;
+  child_ops.to_has_memory =   1;
+  child_ops.to_has_stack =   1;
+  child_ops.to_has_registers =   1;
+  child_ops.to_has_execution =   1;
+  child_ops.to_sections =   0;
+  child_ops.to_sections_end =   0;
   child_ops.to_magic =   OPS_MAGIC;
 }
 
@@ -898,3 +1097,25 @@ _initialize_inftarg ()
 
   add_target (&child_ops);
 }
+
+/* Determine if the thread referenced by "pid" is alive
+   by "polling" it.  If WaitForSingleObject returns WAIT_OBJECT_0
+   it means that the pid has died.  Otherwise it is assumed to be alive. */
+static int
+child_thread_alive (int pid)
+{
+  return WaitForSingleObject(thread_rec (pid, FALSE)->h, 0) == WAIT_OBJECT_0 ?
+	 FALSE : TRUE;
+}
+
+/* Convert pid to printable format. */
+char *
+cygwin_pid_to_str (int pid)
+{
+  static char buf[80];
+  if (pid == current_event.dwProcessId)
+    sprintf (buf, "process %d", pid);
+  else
+    sprintf (buf, "thread %d.0x%x", current_event.dwProcessId, pid);
+  return buf;
+}