remove d30v sanitization

5 files changed, 7 insertions, 78 deletions

diff --git a/gdb/.Sanitize b/gdb/.Sanitize
index 835e2f4..0a65127 100644
--- a/gdb/.Sanitize
+++ b/gdb/.Sanitize
@@ -60,20 +60,6 @@ else
 	fi
 fi
 
-d30v_files="d30v-tdep.c"
-
-if ( echo $* | grep keep\-d30v > /dev/null ) ; then
-	keep_these_too="${d30v_files} ${keep_these_too}"
-	if [ -n "${verbose}" ] ; then
-		echo Keeping ${d30v_files}
-	fi
-else
-	lose_these_too="${d30v_files} ${lose_these_too}"
-	if [ -n "${verbose}" ] ; then
-		echo Deleting ${d30v_files}
-	fi
-fi
-
 sky_files="txvu-tdep.c"
 
 if ( echo $* | grep keep\-sky > /dev/null ) ; then
@@ -201,6 +187,7 @@ cp-valprint.c
 cpu32bug-rom.c
 cxux-nat.c
 d10v-tdep.c
+d30v-tdep.c
 dbug-rom.c
 dbxread.c
 dcache.c
@@ -784,33 +771,6 @@ else
 	done
 fi
 
-if ( echo $* | grep keep\-d30v > /dev/null ) ; then
-	for i in * ; do
-		if test ! -d $i && (grep sanitize-d30v $i > /dev/null) ; then
-			if [ -n "${verbose}" ] ; then
-				echo Keeping d30v stuff in $i
-			fi
-		fi
-	done
-else
-	for i in * ; do
-		if test ! -d $i && (grep sanitize-d30v $i > /dev/null) ; then
-			if [ -n "${verbose}" ] ; then
-				echo Removing traces of \"d30v\" from $i...
-			fi
-			cp $i new
-			sed '/start\-sanitize\-d30v/,/end-\sanitize\-d30v/d' < $i > new
-			if [ -n "${safe}" -a ! -f .Recover/$i ] ; then
-				if [ -n "${verbose}" ] ; then
-					echo Caching $i in .Recover...
-				fi
-				mv $i .Recover
-			fi
-			mv new $i
-		fi
-	done
-fi
-
 if ( echo $* | grep keep\-vr4111 > /dev/null ) ; then
 	for i in * ; do
 		if test ! -d $i && (grep sanitize-vr4111 $i > /dev/null) ; then
diff --git a/gdb/ChangeLog b/gdb/ChangeLog
index ab7f7e27..b614fd3 100644
--- a/gdb/ChangeLog
+++ b/gdb/ChangeLog
@@ -602,12 +602,10 @@ Mon May 18 13:04:27 1998  Michael Snyder  <msnyder@cleaver.cygnus.com>
 	capable target (currently only "remote") before doing anything 
 	else.
 	
-start-sanitize-d30v
 Sat May 16 22:21:48 1998  Frank Ch. Eigler  <fche@cygnus.com>
 
 	* config/d30v/tm-d30v.h (INIT_FRAME_PC_FIRST): Fill in PC into
  	frame struct before extracting saved register offsets.
-end-sanitize-d30v
 	
 Fri May 15 22:47:45 1998  Michael Snyder  <msnyder@cleaver.cygnus.com>
 
@@ -1433,13 +1431,10 @@ Tue Mar 24 16:22:40 1998  Stu Grossman  <grossman@bhuna.cygnus.co.uk>
 
 	* Makefile.in:  Derive SHELL from configure.
 	* config/d10v/d10v.mt config/m32r/m32r.mt
-	config/mn10200/mn10200.mt config/mn10300/mn10300.mt :  Remove -lm
-	from SIM.  This prevents dependency checking of -lm (under NT
-	native builds).  (It is automatically added by configure if it
-	exists.)
-start-sanitize-d30v
-	* config/d30v/d30v.mt: Ditto.
-end-sanitize-d30v
+	config/mn10200/mn10200.mt config/mn10300/mn10300.mt
+	config/d30v/d30v.mt :  Remove -lm from SIM.  This prevents
+	dependency checking of -lm (under NT native builds).  (It is
+	automatically added by configure if it exists.)
 	* doc/configure mswin/configure nlm/configure
 	testsuite/gdb.base/configure testsuite/gdb.c++/configure
 	testsuite/gdb.chill/configure testsuite/gdb.disasm/configure
@@ -2245,7 +2240,6 @@ Wed Jan 14 19:27:02 1998  Stan Shebs  <shebs@andros.cygnus.com>
 	* config/mips/{r3900.mt,r3900l.mt,tm-r3900.h,tm-r3900l.h}:
 	Remove, no longer used.
 
-start-sanitize-d30v
 Wed Jan 14 18:11:26 1998  Michael Meissner  <meissner@cygnus.com>
 
 	Patch from Jim Wilson.
@@ -2254,7 +2248,6 @@ Wed Jan 14 18:11:26 1998  Michael Meissner  <meissner@cygnus.com>
 
 	* config/d30v/tm-d30v.h (CALL_DUMMY): Initialize as { 0 }, not {}.
 
-end-sanitize-d30v
 Tue Jan 13 16:38:48 1998  Fred Fish  <fnf@cygnus.com>
 
 	* configure.in (--with-mmalloc): Add new configure arg to use the
diff --git a/gdb/ChangeLog-97 b/gdb/ChangeLog-97
index 61e574e..dd8450d 100644
--- a/gdb/ChangeLog-97
+++ b/gdb/ChangeLog-97
@@ -39,7 +39,6 @@ Mon Dec 22 21:51:53 1997  Mark Alexander  <marka@cygnus.com>
 
 	* remote-mips.c (_initialize_remote_mips): Fix DDB doc string.
 
-start-sanitize-d30v
 Sun Dec 21 17:00:06 1997  David Taylor  <taylor@texas.cygnus.com>
 
 	* d30v-tdep.c (d30v_frame_find_saved_regs): split most of
@@ -55,7 +54,6 @@ Fri Dec 19 09:49:49 1997  David Taylor  <taylor@texas.cygnus.com>
 	(d30v_frame_find_saved_regs): set it.
 	* config/d30v/tm-d30v.h: improved FRAME_CHAIN_VALID
 
-end-sanitize-d30v
 Thu Dec 18 12:34:28 1997  Andrew Cagney  <cagney@b1.cygnus.com>
 
 	From Gavin Koch <gavin@cygnus.com>: mips-tdep.c
@@ -107,7 +105,6 @@ Tue Dec 16 11:24:30 1997  Jeffrey A Law  (law@cygnus.com)
 	* remote-sim.c (gdbsim_open): Use "--architecture" instead of
 	ambigious short form.
 	
-start-sanitize-d30v
 Tue Dec 16 10:29:16 1997  David Taylor  <taylor@texas.cygnus.com>
 
 	* d30v-tdep.c (d30v_frame_chain): don't or in DMEM_START to
@@ -122,7 +119,6 @@ Tue Dec 16 10:29:16 1997  David Taylor  <taylor@texas.cygnus.com>
 	* config/tm-d30v.h (EXTRACT_STRUCT_VALUE_ADDRESS): fix, it's r2,
 	not r0; (FRAME_CHAIN_VALID): handle use of external memory;
 	(STACK_ALIGN): define.
-end-sanitize-d30v
 
 Mon Dec 15 15:13:57 1997  Andrew Cagney  <cagney@b1.cygnus.com>
 
@@ -173,7 +169,6 @@ Thu Dec 11 14:28:01 1997  Michael Snyder  (msnyder@cleaver.cygnus.com)
 	backwards thru the trace buffer in a loop.
 	* (struct tracepoint): delete unused field.
 
-start-sanitize-d30v
 Wed Dec 10 17:57:00 1997  David Taylor  <taylor@texas.cygnus.com>
 
 	* d30v-tdep.c : don't bury lots of magic numbers in the code
@@ -188,7 +183,6 @@ Wed Dec 10 17:57:00 1997  David Taylor  <taylor@texas.cygnus.com>
 	STACK_START; change FR_REGNUM to 61 (was 11).  Reformat comment
 	about DUMMY FRAMES so that it is readable.  Fix SAVED_PC_AFTER_FRAME
 	macro.
-end-sanitize-d30v
 
 Wed Dec 10 17:41:07 1997  Jim Blandy  <jimb@zwingli.cygnus.com>
 
@@ -383,7 +377,6 @@ Fri Nov 14 13:04:34 1997  Jeffrey A Law  (law@cygnus.com)
 	* jv-exp.y (copy_exp, insert_exp): Avoid ANSI prototypes.
 
 end-sanitize-java	
-start-sanitize-d30v
 Thu Nov 13 09:47:35 1997  Michael Meissner  <meissner@cygnus.com>
 
 	* d30v-tdep.c (d30v_print_flags): Function to print the d30v flags
@@ -396,7 +389,6 @@ Thu Nov 13 09:47:35 1997  Michael Meissner  <meissner@cygnus.com>
 
 	* config/d30v/tm-d30v.h (PSW_*): Add macros for each of the PSW
 	bits that are defined.
-end-sanitize-d30v
 
 Wed Nov 12 14:58:39 1997  Jeff Holcomb  <jeffh@cygnus.com>
 
@@ -671,11 +663,10 @@ Wed Sep 24 18:12:47 1997  Stu Grossman  <grossman@babylon-5.cygnus.com>
 	* remote-sim.c:  New functions gdbsim_insert/remove_breakpoint.  Use
 	intrinsic simulator breakpoints if available, otherwise do it the
  	hard way.
-start-sanitize-d30v
+
 	* configure.tgt:  Add d30v.
 	* d30v-tdep.c:  New file.
 	* config/d30v/d30v.mt, config/d30v/tm-d30v.h:  New files.
-end-sanitize-d30v
 
 Tue Sep 23 11:24:13 1997  Stan Shebs  <shebs@andros.cygnus.com>
 
diff --git a/gdb/config/.Sanitize b/gdb/config/.Sanitize
index 8f8596f..83a1570 100644
--- a/gdb/config/.Sanitize
+++ b/gdb/config/.Sanitize
@@ -29,20 +29,6 @@ else
 	fi
 fi
 
-d30v_files="d30v"
-
-if ( echo $* | grep keep\-d30v > /dev/null ) ; then
-	keep_these_too="${d30v_files} ${keep_these_too}"
-	if [ -n "${verbose}" ] ; then
-		echo Keeping ${d30v_files}
-	fi
-else
-	lose_these_too="${d30v_files} ${lose_these_too}"
-	if [ -n "${verbose}" ] ; then
-		echo Deleting ${d30v_files}
-	fi
-fi
-
 # All files listed between the "Things-to-keep:" line and the
 # "Files-to-sed:" line will be kept.  All other files will be removed.
 # Directories listed in this section will have their own Sanitize
@@ -57,6 +43,7 @@ arc
 arm
 convex
 d10v
+d30v
 gould
 h8300
 h8500
diff --git a/gdb/configure.tgt b/gdb/configure.tgt
index 9896d92..bf95f64 100644
--- a/gdb/configure.tgt
+++ b/gdb/configure.tgt
@@ -64,10 +64,8 @@ c1-*-*)			gdb_target=convex ;;
 c2-*-*)			gdb_target=convex ;;
 
 d10v-*-*)		gdb_target=d10v ;;
-# start-sanitize-d30v
 d30v-*-*)		gdb_target=d30v ;;
 
-# end-sanitize-d30v
 h8300-*-*)		gdb_target=h8300 ;;
 h8500-*-*)		gdb_target=h8500 ;;