Move trace conditions tests from ftrace.exp to trace-condition.exp

This patch moves conditional tests that were done in ftrace.exp to
trace-condition.exp.

Note that emit_ref is now tested by the anarg local variable there is no
need to test the register directly.

All emit calls have been tested using asserts before / after the move, to
ensure that the tests cover the same functions.

Note that these function were not covered before and are still not:
emit_gt_goto, emit_lt_goto, emit_pop, emit_unsigned_less.

gdb/testsuite/ChangeLog:

	* gdb.trace/ftrace.exp (test_ftrace_condition): Remove.
	Move condition tests...
	* gdb.trace/trace-condition.exp: Here.

3 files changed, 12 insertions, 74 deletions

diff --git a/gdb/testsuite/ChangeLog b/gdb/testsuite/ChangeLog
index 45c3ff0..1b668eb 100644
--- a/gdb/testsuite/ChangeLog
+++ b/gdb/testsuite/ChangeLog
@@ -1,5 +1,11 @@
 2016-05-30  Antoine Tremblay  <antoine.tremblay@ericsson.com>
 
+	* gdb.trace/ftrace.exp (test_ftrace_condition): Remove.
+	Move condition tests...
+	* gdb.trace/trace-condition.exp: Here.
+
+2016-05-30  Antoine Tremblay  <antoine.tremblay@ericsson.com>
+
 	* gdb.trace/trace-condition.exp: Add counter-case tests.
 
 2016-05-30  Jan Kratochvil  <jan.kratochvil@redhat.com>
diff --git a/gdb/testsuite/gdb.trace/ftrace.exp b/gdb/testsuite/gdb.trace/ftrace.exp
index f770bf7..e90485c 100644
--- a/gdb/testsuite/gdb.trace/ftrace.exp
+++ b/gdb/testsuite/gdb.trace/ftrace.exp
@@ -174,43 +174,6 @@ proc test_fast_tracepoints {} {
     }
 }
 
-# Test compiled-condition
-# CONDEXP is the condition expression to be compiled.
-# VAR is the variable to be collected for testing.
-# LIST is a list of expected values of VAR should be collected
-# based on the CONDEXP.
-proc test_ftrace_condition { condexp var list } \
-{ with_test_prefix "cond $condexp" \
-{
-    global executable
-    global hex
-
-    clean_restart ${executable}
-    if ![runto_main] {
-	fail "Can't run to main to check for trace support"
-	return -1
-    }
-
-    gdb_test "break end" ".*" ""
-    gdb_test "tvariable \$tsv = 0"
-    gdb_test "ftrace set_point if $condexp" "Fast tracepoint .*"
-    gdb_trace_setactions "set action for tracepoint .*" "" \
-	"collect $var" "^$"
-
-    gdb_test_no_output "tstart" ""
-    gdb_test "continue" \
-	"Continuing\\.\[ \r\n\]+(Thread .* hit )?Breakpoint.*" ""
-    gdb_test_no_output "tstop" ""
-
-    set i 0
-    foreach expval $list {
-	gdb_test "tfind" "Found trace frame $i, tracepoint .*" "tfind frame $i"
-	gdb_test "print $var" "\\$\[0-9\]+ = $expval\[\r\n\]" "expect $expval"
-	set i [expr $i + 1]
-    }
-    gdb_test "tfind" "Target failed to find requested trace frame\."
-}}
-
 gdb_reinitialize_dir $srcdir/$subdir
 
 if { [gdb_test "info sharedlibrary" ".*${remote_libipa}.*" "IPA loaded"] != 0 } {
@@ -219,40 +182,3 @@ if { [gdb_test "info sharedlibrary" ".*${remote_libipa}.*" "IPA loaded"] != 0 }
 }
 
 test_fast_tracepoints
-
-# Test conditional goto and simple expression.
-test_ftrace_condition "globvar > 7" "globvar" { 8 9 10 }
-test_ftrace_condition "globvar < 4" "globvar" { 1 2 3 }
-test_ftrace_condition "globvar >= 7" "globvar" { 7 8 9 10 }
-test_ftrace_condition "globvar <= 4" "globvar" { 1 2 3 4 }
-test_ftrace_condition "globvar == 5" "globvar" { 5 }
-test_ftrace_condition "globvar != 5" "globvar" { 1 2 3 4 6 7 8 9 10 }
-test_ftrace_condition "globvar > 3 && globvar < 7" "globvar" { 4 5 6 }
-test_ftrace_condition "globvar < 3 || globvar > 7" "globvar" { 1 2 8 9 10 }
-test_ftrace_condition "(globvar << 2) + 1 == 29" "globvar" { 7 }
-test_ftrace_condition "(globvar >> 2) == 2" "globvar" { 8 9 10 }
-
-# Test emit_call by accessing trace state variables.
-test_ftrace_condition "(\$tsv = \$tsv + 2) > 10" "globvar" { 6 7 8 9 10 }
-
-# This expression is used for testing emit_reg.
-if [is_amd64_regs_target] {
-    set arg0exp "\$rdi"
-} elseif [is_x86_like_target] {
-    set arg0exp "*(int *) (\$ebp + 8)"
-} elseif { [istarget "aarch64*-*-*"] } {
-    set arg0exp "\$x0"
-} elseif [istarget "powerpc*-*-*"] {
-    set arg0exp "\$r3"
-} elseif { [istarget "s390x-*-*"] } {
-    set arg0exp "\$r2"
-} elseif { [istarget "s390-*-*"] } {
-    # On targets with 64-bit GPRs, avoid the high part.
-    set arg0exp "(\$r2 & 0xffffffff)"
-} else {
-    set arg0exp ""
-}
-
-if { "$arg0exp" != "" } {
-    test_ftrace_condition "($arg0exp > 500)" "globvar" { 6 7 8 9 10 }
-}
diff --git a/gdb/testsuite/gdb.trace/trace-condition.exp b/gdb/testsuite/gdb.trace/trace-condition.exp
index ca3232f..115d7eb 100644
--- a/gdb/testsuite/gdb.trace/trace-condition.exp
+++ b/gdb/testsuite/gdb.trace/trace-condition.exp
@@ -137,6 +137,12 @@ foreach trace_command { "trace" "ftrace" } {
     test_tracepoints $trace_command "anarg == 100 && globvar == 1" 1 18955_x86_64_failure
 
     # Test various operations to cover as many opcodes as possible.
+    test_tracepoints $trace_command "21 == 21" 10
+    test_tracepoints $trace_command "11 == 21" 0
+
+    test_tracepoints $trace_command "21 != 42" 10
+    test_tracepoints $trace_command "42 != 42" 0
+
     test_tracepoints $trace_command "21 + 21 == 42" 10
     test_tracepoints $trace_command "21 + 21 == 11" 0