* configure.in: Add m68k-ericsson-*.

	* remote-es1800.c, tm-es1800.h, config/es1800.mt:  New files.

7 files changed, 2309 insertions, 2 deletions

diff --git a/gdb/.Sanitize b/gdb/.Sanitize
index 15a1134..c90e9c9 100644
--- a/gdb/.Sanitize
+++ b/gdb/.Sanitize
@@ -160,6 +160,7 @@ regex.h
 rem-multi.shar
 remote-adapt.c
 remote-eb.c
+remote-es1800.c
 remote-hms.c
 remote-mm.c
 remote-nindy.c
@@ -198,8 +199,6 @@ terminal.h
 tm-29k.h
 tm-3b1.h
 tm-68k.h
-tm-h8300.h
-tm-m88k.h
 tm-altos.h
 tm-altosgas.h
 tm-amix.h
@@ -207,6 +206,8 @@ tm-arm.h
 tm-bigmips.h
 tm-convex.h
 tm-delta88.h
+tm-es1800.h
+tm-h8300.h
 tm-hp300bsd.h
 tm-hp300hpux.h
 tm-hppabsd.h
@@ -218,6 +219,7 @@ tm-i960.h
 tm-irix3.h
 tm-isi.h
 tm-linux.h
+tm-m88k.h
 tm-merlin.h
 tm-mips.h
 tm-news.h
diff --git a/gdb/ChangeLog b/gdb/ChangeLog
index 6757671..00fc56d 100644
--- a/gdb/ChangeLog
+++ b/gdb/ChangeLog
@@ -1,3 +1,8 @@
+Tue Jul  7 00:20:29 1992  Fred Fish  (fnf@cygnus.com)
+
+	* configure.in:  Add m68k-ericsson-*.
+	* remote-es1800.c, tm-es1800.h, config/es1800.mt:  New files.
+
 Sun Jul  5 17:17:16 1992  Fred Fish  (fnf@cygnus.com)
 
 	* maint.c:  New file.
diff --git a/gdb/config/.Sanitize b/gdb/config/.Sanitize
index fd43312..0f26ca3 100644
--- a/gdb/config/.Sanitize
+++ b/gdb/config/.Sanitize
@@ -42,6 +42,7 @@ decstation.mh
 decstation.mt
 delta88.mh
 delta88.mt
+es1800.mt
 go32.mh
 go32.mt
 h8300hms.mt
diff --git a/gdb/config/es1800.mt b/gdb/config/es1800.mt
new file mode 100644
index 0000000..fd42163
--- /dev/null
+++ b/gdb/config/es1800.mt
@@ -0,0 +1,3 @@
+# Target:  Ericcson ES-1800 emulator (remote) for m68k.
+TDEPFILES= exec.o m68k-pinsn.o m68k-tdep.o remote-es1800.o 
+TM_FILE= tm-es1800.h
diff --git a/gdb/configure.in b/gdb/configure.in
index b53ee77..edbafff 100644
--- a/gdb/configure.in
+++ b/gdb/configure.in
@@ -197,6 +197,7 @@ m68k)
 		sysv4*)		gdb_target=amix ;;
 		esac
 		;;
+	ericsson) gdb_target=es1800 ;;
 	hp)
 		case "${target_os}" in
 		bsd)	gdb_target=hp300bsd ;;
diff --git a/gdb/remote-es1800.c b/gdb/remote-es1800.c
new file mode 100644
index 0000000..71a4bf7
--- /dev/null
+++ b/gdb/remote-es1800.c
@@ -0,0 +1,2261 @@
+/* Memory-access and commands for remote es1800 processes, for GDB.
+   Copyright (C) 1988, 1992 Free Software Foundation, Inc.
+
+   This file is added to GDB to make it possible to do debugging via an
+   ES-1800 emulator. The code was originally written by Johan Holmberg
+   TT/SJ Ericsson Telecom AB and later modified byJohan Henriksson
+   TT/SJ. It was modified for gdb 4.0 by TX/DK Jan Nordenand by TX/DKG
+   Harald Johansen.
+
+This file is part of GDB.
+
+GDB is free software; you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation; either version 1, or (at your option)
+any later version.
+
+GDB is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with GDB; see the file COPYING.  If not, write to
+the Free Software Foundation, 675 Mass Ave, Cambridge, MA 02139, USA.  */
+
+
+/* Emulator communication protocol.
+   All values are encoded in ascii hex digits.
+
+        Request
+Command
+Reply
+	read registers:
+DR<cr>
+     - 0 -    - 1 -    - 2 -    - 3 -      - 4 -    - 5 -    -- 6 -   - 7 - 
+D = XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX   XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX
+A = XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX   XXXXXXXX XXXXXXXX XXXXXXXX 
+    PC = XXXXXX       SSP = XXXXXX    USP = XXXXXX     SR = XXXXXXXX
+ >
+Each byte of register data is described by two hex digits.
+
+	write regs
+D0=XXXXXXXX<cr>
+ >D1=XXXXXXXX<cr>
+ >D2=XXXXXXXX<cr>
+ >D3=XXXXXXXX<cr>
+ >D4=XXXXXXXX<cr>
+ >D5=XXXXXXXX<cr>
+ >D6=XXXXXXXX<cr>
+ >D7=XXXXXXXX<cr>
+ >A0=XXXXXXXX<cr>
+ >A1=XXXXXXXX<cr>
+ >A2=XXXXXXXX<cr>
+ >A3=XXXXXXXX<cr>
+ >A4=XXXXXXXX<cr>
+ >A5=XXXXXXXX<cr>
+ >A6=XXXXXXXX<cr>
+ >A7=XXXXXXXX<cr>
+ >SR=XXXXXXXX<cr>
+ >PC=XXXXXX<cr>
+ >
+Each byte of register data is described by two hex digits.
+
+	read mem
+@.BAA..AA
+$FFFFFFXX
+ >
+AA..AA is address, XXXXXXX is the contents
+
+	write mem
+	@.BAA..AA=$XXXXXXXX
+ >
+AA..AA is address, XXXXXXXX is data
+
+	cont
+PC=$AA..AA
+ >RBK
+R>
+AA..AA is address to resume. If AA..AA is omitted, resume at same address.
+
+	step
+PC=$AA..AA
+ >STP
+R>
+AA..AA is address to resume. If AA..AA is omitted, resume at same address.
+
+	kill req
+STP
+ >
+*/
+
+
+#include <stdio.h>
+#include <signal.h>
+#include <sys/ioctl.h>
+#include <sys/file.h>
+#include <errno.h>
+#include <ctype.h>
+#include <string.h>
+#include <setjmp.h>
+#include <fcntl.h>
+#include "defs.h"
+#include "frame.h"
+#include "inferior.h"
+#include "target.h"
+#include "wait.h"
+#include "terminal.h"
+#include "command.h"
+
+#ifdef USG
+#include <sys/types.h>
+#endif
+
+#include <signal.h>
+
+/* External variables referenced. */
+
+extern bfd *exec_bfd;
+
+/* Prototypes for local functions */
+
+static void
+es1800_child_detach PARAMS ((char *, int));
+
+static void
+es1800_child_open PARAMS ((char *, int));
+
+static void 
+es1800_transparent PARAMS ((char *, int));
+
+static void
+es1800_create_inferior PARAMS ((char *, char *, char **));
+
+static void
+es1800_load PARAMS ((char *, int));
+
+static void
+es1800_kill PARAMS ((void));
+
+static int
+verify_break PARAMS ((int));
+
+static int
+es1800_remove_breakpoint PARAMS ((CORE_ADDR, char *));
+
+static int
+es1800_insert_breakpoint PARAMS ((CORE_ADDR, char *));
+
+static void
+es1800_files_info PARAMS ((struct target_ops *));
+
+static int
+es1800_xfer_inferior_memory PARAMS ((CORE_ADDR, char *, int, int,
+				     struct target_ops *));
+
+static void 
+es1800_prepare_to_store PARAMS ((void));
+
+static int
+es1800_wait PARAMS ((WAITTYPE *));
+
+static void
+es1800_resume PARAMS ((int, int));
+
+static void
+es1800_detach PARAMS ((char *, int));
+
+static void
+es1800_attach PARAMS ((char *, int));
+
+static int
+damn_b PARAMS ((char *));
+
+static void
+es1800_open PARAMS ((char *, int));
+
+static void
+es1800_timer PARAMS ((void));
+
+static void
+es1800_reset PARAMS ((char *));
+
+static void
+es1800_request_quit PARAMS ((void));
+
+static int
+readchar PARAMS ((void));
+
+static void
+expect PARAMS ((char *, int));
+
+static void
+expect_prompt PARAMS ((void));
+
+static void
+download PARAMS ((FILE *, int, int));
+
+#if 0
+static void
+bfd_copy PARAMS ((bfd *, bfd *));
+#endif
+
+static void
+get_break_addr PARAMS ((int, CORE_ADDR *));
+
+static int
+fromhex PARAMS ((int));
+
+static int
+tohex PARAMS ((int));
+
+static void
+es1800_close PARAMS ((int));
+
+static void
+es1800_fetch_registers PARAMS ((void));
+
+static void
+es1800_fetch_register PARAMS ((int));
+
+static void
+es1800_store_register PARAMS ((int));
+
+static void
+es1800_read_bytes PARAMS ((CORE_ADDR, char *, int));
+
+static void
+es1800_write_bytes PARAMS ((CORE_ADDR, char *, int));
+
+static void
+send_with_reply PARAMS ((char *, char *, int));
+
+static void
+send_command PARAMS ((char *));
+
+static void
+send PARAMS ((char *));
+
+static void
+getmessage PARAMS ((char *, int));
+
+static void
+es1800_mourn_inferior PARAMS ((void));
+
+static void
+es1800_create_break_insn PARAMS ((char *, int));
+
+static void
+es1800_init_break PARAMS ((char *, int));
+
+/* Local variables */
+
+#define LOG_FILE "es1800.log"
+#if defined (LOG_FILE)
+static FILE *log_file;
+#endif
+
+static struct target_ops es1800_ops;		/* Forward decl */
+static struct target_ops es1800_child_ops;	/* Forward decl */
+
+static int kiodebug;
+static int timeout = 100; 
+static char *savename;				/* Name of i/o device used */
+static TERMINAL es1800_sg_save;			/* Save stty state */
+static int es1800_fc_save;			/* Save fcntl state */
+
+/* indicates that the emulator uses 32-bit data-adress (68020-mode) 
+   instead of 24-bit (68000 -mode) */
+
+static int m68020;
+
+#define MODE (m68020 ? "M68020" : "M68000" )
+#define ES1800_BREAK_VEC (0xf)
+
+/* Descriptor for I/O to remote machine.  Initialize it to -1 so that
+   es1800_open knows that we don't have a file open when the program
+   starts.  */
+
+static int es1800_desc = -1;
+
+#define	PBUFSIZ	1000
+#define HDRLEN sizeof("@.BAAAAAAAA=$VV\r")
+
+/* Maximum number of bytes to read/write at once.  The value here
+   is chosen to fill up a packet.  */
+
+#define MAXBUFBYTES ((PBUFSIZ-150)*16/75 )
+
+static int es1800_break_vec = 0;
+static char es1800_break_insn[2];
+static long es1800_break_address;
+static void (*old_sigint)();		/* Old signal-handler for sigint */
+static jmp_buf interrupt;
+
+/* Local signalhandler to allow breaking tranfers or program run.
+   Rely on global variables: old_sigint(), interrupt */
+
+static void
+es1800_request_quit ()
+{
+  /* restore original signalhandler */
+  signal (SIGINT, old_sigint);
+  longjmp (interrupt, 1);
+}
+
+
+/* Reset emulator.
+   Sending reset character(octal 32) to emulator.
+   quit - return to '(esgdb)' prompt or continue	*/
+
+static void
+es1800_reset (quit)
+     char *quit;
+{
+  char buf[80];
+
+  if (quit)
+    {
+      printf ("\nResetting emulator...  ");
+    }
+  strcpy (buf, "\032");
+  send (buf);
+  expect_prompt ();
+  if (quit)
+    {
+      error ("done\n");
+    }
+}
+
+
+/* Called when SIGALRM signal sent due to alarm() timeout.
+   Rely on global variables: timeout  */
+
+#ifndef HAVE_TERMIO
+
+static void
+es1800_timer ()
+{
+  if (kiodebug)
+    {
+      printf ("es1800_timer called\n");
+    }
+  alarm (timeout);
+}
+
+#endif	/* HAVE_TERMIO */
+
+
+/* Open a connection to a remote debugger and push the new target
+   onto the stack. Check if the emulator is responding and find out
+   what kind of processor the emulator is connected to.
+   Initiate the breakpoint handling in the emulator.
+
+   name     - the filename used for communication (ex. '/dev/tta')
+   from_tty - says whether to be verbose or not */
+
+static void
+es1800_open (name, from_tty)
+     char *name;
+     int from_tty;
+{
+  TERMINAL sg;
+  char buf[PBUFSIZ];
+  char *p;
+  int i, fcflag;
+  char *baudrate;
+
+  m68020 = 0;
+
+  if (!name)           /* no device name given in target command */
+    {
+      error_no_arg ("serial port device name");
+    }
+  baudrate = baud_rate ? baud_rate : "19200";  /* default baudrate = 19200 */
+
+  target_preopen (from_tty);
+  es1800_close (0);
+
+  /* open the device and configure it for communication */
+
+#ifndef DEBUG_STDIN
+
+  es1800_desc = open (name, O_RDWR);
+  if (es1800_desc < 0)
+    {
+      perror_with_name (name);
+    }
+  savename = savestring (name, strlen (name));
+
+  if (ioctl (es1800_desc, TIOCGETP, &sg) == -1)
+    {
+      perror_with_name (name);
+    }
+  es1800_sg_save = sg;
+
+  if ((fcflag = fcntl (es1800_desc, F_GETFL, 0)) == -1)
+    {
+      perror_with_name ("fcntl serial");
+    }
+  es1800_fc_save = fcflag;
+
+  fcflag = (fcflag & (_FREAD | _FWRITE)); /* mask out any funny stuff */
+  if (fcntl (es1800_desc, F_SETFL, fcflag) == -1)
+    {
+      perror_with_name ("fcntl serial");
+    }
+
+#ifdef HAVE_TERMIO
+  sg.c_cc[VMIN] = 0;		/* read with timeout.  */
+  sg.c_cc[VTIME] = timeout * 10;
+  sg.c_lflag &= ~(ICANON | ECHO);
+  sg.c_cflag = (sg.c_cflag & ~CBAUD) | damn_b (baudrate);
+#else
+  sg.sg_ispeed = damn_b (baudrate);
+  sg.sg_ospeed = damn_b (baudrate);
+  sg.sg_flags = CBREAK+TANDEM;
+#endif
+
+  if ((ioctl (es1800_desc, TIOCSETP, &sg)) == -1)
+    {
+      perror ("es1800_open: error in ioctl");
+    }
+
+#endif	/* DEBUG_STDIN */
+
+  push_target (&es1800_ops);	/* Switch to using remote target now */
+  if (from_tty)
+    {
+      printf ("Remote ES1800 debugging using %s\n", name);
+    }
+
+#ifndef HAVE_TERMIO
+
+#ifndef NO_SIGINTERRUPT
+
+  /* Cause SIGALRM's to make reads fail with EINTR instead of resuming
+     the read.  */
+
+  if (siginterrupt (SIGALRM, 1) != 0)
+    {
+      perror ("es1800_open: error in siginterrupt");
+    }
+
+#endif	/* NO_SIGINTERRUPT */
+
+  /* Set up read timeout timer.  */
+
+  if ((void(*)()) signal (SIGALRM, es1800_timer) == (void(*)()) -1)
+    {
+      perror ("es1800_open: error in signal");
+    }
+
+#endif	/* HAVE_TERMIO */
+
+
+#if defined (LOG_FILE)
+
+  log_file = fopen (LOG_FILE, "w");
+  if (log_file == NULL)
+    {
+      perror_with_name (LOG_FILE);
+    }
+
+#endif	/* LOG_FILE */
+
+  /* Hello?  Are you there?, also check mode  */
+
+  /*  send_with_reply( "DB 0 TO 1", buf, sizeof(buf)); */
+  /*  for (p = buf, i = 0; *p++ =='0';)  */   /* count the number of zeros */
+  /*      i++; */
+
+  send ("\032");
+  getmessage (buf, sizeof (buf));  /* send reset character */
+
+  if (from_tty)
+    {
+      printf ("Checking mode.... ");
+    }
+  /*  m68020 = (i==8); */   /* if eight zeros then we are in m68020 mode */
+
+  /* What kind of processor am i talking to ?*/
+  p = buf;
+  while (*p++ != '\n') {;}
+  while (*p++ != '\n') {;}
+  while (*p++ != '\n') {;}
+  for (i = 0; i < 20; i++, p++) {;}
+  m68020 = !strncmp (p, "68020", 5);
+  if (from_tty)
+    {
+      printf ("You are in %s(%c%c%c%c%c)-mode\n", MODE, p[0], p[1], p[2],
+	      p[3], p[4]);
+    }
+
+  /* if no init_break statement is present in .gdb file we have to check 
+     whether to download a breakpoint routine or not */
+
+#if 0
+  if ((es1800_break_vec == 0) || (verify_break (es1800_break_vec) != 0)
+      && query ("No breakpoint routine in ES 1800 emulator!\nDownload a breakpoint routine to the emulator? "))
+    {
+      CORE_ADDR memaddress;
+      printf ("Give the start address of the breakpoint routine: ");
+      scanf ("%li", &memaddress);
+      es1800_init_break ((es1800_break_vec ? es1800_break_vec :
+			  ES1800_BREAK_VEC), memaddress);
+    }
+#endif
+
+}
+
+/*  Close out all files and local state before this target loses control.
+    quitting - are we quitting gdb now? */
+
+static void
+es1800_close (quitting)
+     int quitting;
+{
+  if (es1800_desc >= 0)
+    {
+      printf ("\nClosing connection to emulator...\n");
+      ioctl (es1800_desc, TIOCSETP, &es1800_sg_save);
+      fcntl (es1800_desc,F_SETFL, es1800_fc_save);
+      close (es1800_desc);
+      es1800_desc = -1;
+    }
+  if (savename != NULL)
+    {
+      free (savename);
+    }
+  savename = NULL;
+
+#if defined (LOG_FILE)
+
+  if (log_file != NULL)
+    {
+      if (ferror (log_file))
+	{
+	  printf ("Error writing log file.\n");
+	}
+      if (fclose (log_file) != 0)
+	{
+	  printf ("Error closing log file.\n");
+	}
+      log_file = NULL;
+    }
+
+#endif	/* LOG_FILE */
+
+}
+
+/* damn_b()
+
+   Translate baud rates from integers to damn B_codes.  Unix should
+   have outgrown this crap years ago, but even POSIX wouldn't buck it.
+   rate - the baudrate given as a string
+   return value: the baudrate as a B_code */
+
+#ifndef B19200
+#  define B19200 EXTA
+#endif
+#ifndef B38400
+#  define B38400 EXTB
+#endif
+
+struct
+{
+  char *rate,
+  damn_b;
+} baudtab[] = {
+  {"0", B0},
+  {"50", B50},
+  {"75", B75},
+  {"110", B110},
+  {"134", B134},
+  {"150", B150},
+  {"200", B200},
+  {"300", B300},
+  {"600", B600},
+  {"1200", B1200},
+  {"1800", B1800},
+  {"2400", B2400},
+  {"4800", B4800},
+  {"9600", B9600},
+  {"19200", B19200},
+  {"38400", B38400},
+  {0, -1},
+};
+
+static int
+damn_b (rate)
+     char *rate;
+{
+  int i;
+
+  for (i = 0; baudtab[i].rate != 0; i++)
+    {
+      if (!strcmp (rate, baudtab[i].rate))
+	{
+	  return (baudtab[i].damn_b);
+	}
+    }
+  error ("Illegal baudrate");
+}
+
+
+/*  Attaches to a process on the target side
+    proc_id  - the id of the process to be attached.
+    from_tty - says whether to be verbose or not */
+
+static void
+es1800_attach (args, from_tty)
+    char *args;
+    int from_tty;
+{
+  error ("Cannot attach to pid %s, this feature is not implemented yet.",
+	 args);
+}
+
+
+/* Takes a program previously attached to and detaches it.
+   We better not have left any breakpoints
+   in the program or it'll die when it hits one.
+   Close the open connection to the remote debugger.
+   Use this when you want to detach and do something else
+   with your gdb.
+ 
+   args     - arguments given to the 'detach' command
+   from_tty - says whether to be verbose or not */
+
+static void
+es1800_detach (args, from_tty)
+     char *args;
+     int from_tty;
+{
+  if (args)
+    {
+      error ("Argument given to \"detach\" when remotely debugging.");
+    }
+  pop_target ();
+  if (from_tty)
+    {
+      printf ("Ending es1800 remote debugging.\n");
+    }
+}
+
+
+/* Tell the remote machine to resume.
+   step    - single-step or run free
+   siggnal - the signal value to be given to the target (0 = no signal) */
+
+static void
+es1800_resume (step, siggnal)
+     int step;
+     int siggnal;
+{
+  char buf[PBUFSIZ];
+
+  if (siggnal)
+    {
+      error ("Can't send signals to a remote system.");
+    }
+  if (step)
+    {
+      strcpy (buf,"STP\r");
+      send (buf);
+    }
+  else
+    {
+      send_command ("RBK");
+    }
+}
+
+/* Wait until the remote machine stops, then return,
+   storing status in STATUS just as `wait' would.
+   status -  */
+ 
+static int
+es1800_wait (status)
+     WAITTYPE *status;
+{
+  unsigned char buf[PBUFSIZ];
+  int old_timeout = timeout;
+
+  WSETEXIT ((*status), 0);
+  timeout = 0;		/* Don't time out -- user program is running. */
+  if (!setjmp (interrupt))
+    {
+      old_sigint = signal (SIGINT, es1800_request_quit);
+      while (1)
+        {
+	  getmessage (buf, sizeof(buf));
+	  if (strncmp ( buf, "\r\n* BREAK *", 11) == 0) 
+	    {
+	      WSETSTOP ((*status), SIGTRAP);
+	      send_command ("STP");	/* Restore stack and PC and such */
+	      if (m68020)
+		{
+		  send_command ("STP");
+		}
+	      break;
+	    }
+	  if (strncmp (buf, "STP\r\n ", 6) == 0)
+	    {
+	      WSETSTOP ((*status), SIGTRAP);
+	      break;
+	    }
+	  if (buf[strlen (buf) - 2] == 'R')
+	    {
+	      printf ("Unexpected emulator reply: \n%s\n", buf);
+	    }
+	  else
+	    {
+	      printf ("Unexpected stop: \n%s\n", buf);
+	      WSETSTOP ((*status), SIGQUIT);
+	      break;
+	    }
+        }
+    }
+  else
+    {
+      fflush (stdin);
+      printf ("\nStopping emulator...");
+      if (!setjmp (interrupt))
+	{
+	  old_sigint = signal (SIGINT, es1800_request_quit);
+	  send_command ("STP");
+	  printf (" emulator stopped\n");
+	  WSETSTOP ((*status), SIGINT);
+        }
+      else
+	{
+	  fflush (stdin);
+	  es1800_reset ((char*) 1);
+	}
+    }
+  signal (SIGINT, old_sigint);
+  timeout = old_timeout;
+  return (0);
+}
+
+
+/* Fetch register values from remote machine.
+   regno - the register to be fetched (fetch all registers if -1) */
+
+static void
+es1800_fetch_register (regno)
+     int regno;
+{
+  char buf[PBUFSIZ];
+  int k;
+  int r;
+  char *p;
+  static char regtab[18][4] = 
+    {
+      "D0 ", "D1 ", "D2 ", "D3 ", "D4 ", "D5 ", "D6 ", "D7 ",
+      "A0 ", "A1 ", "A2 ", "A3 ", "A4 ", "A5 ", "A6 ", "SSP",
+      "SR ", "PC "
+    };
+
+  if ((regno < 15) || (regno == 16) || (regno == 17))
+    {
+      r = regno * 4;
+      send_with_reply (regtab[regno], buf, sizeof (buf));
+      p = buf;
+      for (k = 0; k < 4; k++)
+	{
+	  if ((p[k*2 + 1] == 0) || (p[k*2 + 2] == 0))
+	    {
+	      error ("Emulator reply is too short: %s", buf);
+	    }
+	  registers[r++] = (fromhex (p[k*2 + 1]) * 16) + fromhex (p[k*2 + 2]);
+	}
+    }
+  else
+    {
+      es1800_fetch_registers ();
+    }
+}
+
+/* Read the remote registers into REGISTERS.
+   Always fetches all registers. */
+
+static void
+es1800_fetch_registers ()
+{
+  char buf[PBUFSIZ];
+  char SR_buf[PBUFSIZ];
+  int i;
+  int k;
+  int r;
+  char *p;
+
+  send_with_reply ("DR", buf, sizeof (buf));
+
+  /* Reply is edited to a string that describes registers byte by byte,
+     each byte encoded as two hex characters.  */
+
+  p = buf;
+  r = 0;
+
+  /*  parsing row one - D0-D7-registers  */
+
+  while (*p++ != '\n') {;}
+  for (i = 4; i < 70; i += (i == 39 ? 3 : 1))
+    {
+      for (k = 0; k < 4; k++)
+	{
+	  if (p[i+0] == 0 || p[i+1] == 0)
+	    {
+	      error ("Emulator reply is too short: %s", buf);
+	    }
+	  registers[r++] = (fromhex (p[i+0]) * 16) + fromhex (p[i+1]);
+	  i += 2;
+	}
+    }
+  p += i;
+
+  /*  parsing row two - A0-A6-registers  */
+
+  while (*p++ != '\n') {;}
+  for (i = 4; i < 61; i += (i == 39 ? 3 : 1))
+    {
+      for (k = 0; k < 4; k++)
+	{
+	  if (p[i+0] == 0 || p[i+1] == 0)
+	    {
+	      error ("Emulator reply is too short: %s", buf);
+	    }
+	  registers[r++] = (fromhex (p[i+0])) * 16 + fromhex (p[i+1]);
+	  i += 2;
+	}
+    }
+  p += i;
+
+  while (*p++ != '\n') {;}
+
+  /* fetch SSP-, SR- and PC-registers  */
+
+  /* first - check STATUS-word and decide which stackpointer to use */
+
+  send_with_reply ("SR", SR_buf, sizeof (SR_buf));
+  p = SR_buf;
+  p += 5;
+
+  if (m68020)
+    {
+      if (*p == '3')		 /* use masterstackpointer MSP */
+	{
+	  send_with_reply ("MSP", buf, sizeof (buf));
+	}
+      else if (*p == '2')	/* use interruptstackpointer ISP  */
+	{
+	  send_with_reply ("ISP", buf, sizeof (buf));
+	}
+      else			/* use userstackpointer USP  */
+	{
+	  send_with_reply ("USP", buf, sizeof (buf)); 
+	}
+      p = buf;
+      for (k = 0; k<4; k++)
+	{
+	  if (p[k*2+1] == 0 || p[k*2+2] == 0)
+	    {
+	      error ("Emulator reply is too short: %s", buf);
+	    }
+	  registers[r++] = fromhex (buf[k*2+1]) * 16 + fromhex (buf[k*2+2]);
+	}
+
+      p = SR_buf;
+      for (k = 0; k < 4; k++)
+	{
+	  if (p[k*2+1] == 0 || p[k*2+2] == 0)
+	    {
+	      error ("Emulator reply is too short: %s", buf);
+	    }
+	  registers[r++] =
+	    fromhex (SR_buf[k*2+1]) * 16 + fromhex (SR_buf[k*2+2]);
+	}
+      send_with_reply ("PC", buf, sizeof (buf));
+      p = buf;
+      for (k = 0; k<4; k++)
+	{
+	  if (p[k*2+1] == 0 || p[k*2+2] == 0)
+	    {
+	      error ("Emulator reply is too short: %s", buf);
+	    }
+	  registers[r++] = fromhex (buf[k*2+1]) * 16 + fromhex (buf[k*2+2]);
+	}
+    }
+  else    /* 68000-mode */
+    {                       
+      if (*p == '2') /* use supervisorstackpointer SSP  */
+	{
+	  send_with_reply ("SSP", buf, sizeof (buf)); 
+	}
+      else  /* use userstackpointer USP  */
+	{
+	  send_with_reply ("USP", buf, sizeof (buf)); 
+	}
+
+      /* fetch STACKPOINTER */
+
+      p = buf;
+      for (k = 0; k < 4; k++)
+	{
+	  if (p[k*2 + 1] == 0 || p[k*2 + 2] == 0)
+	    {
+	      error ("Emulator reply is too short: %s", buf);
+	    }
+	  registers[r++] = fromhex (buf[k*2+1]) * 16 + fromhex (buf[k*2+2]);
+	}
+
+      /* fetch STATUS */
+
+      p = SR_buf;
+      for (k = 0; k < 4; k++)
+	{
+	  if (p[k*2+1] == 0 || p[k*2+2] == 0)
+	    {
+	      error ("Emulator reply is too short: %s", buf);
+	    }
+	  registers[r++] =
+	    fromhex (SR_buf[k*2+1]) * 16 + fromhex (SR_buf[k*2+2]);
+	}
+
+      /* fetch PC */
+
+      send_with_reply ("PC", buf, sizeof (buf)); 
+      p = buf;
+      for (k = 0; k < 4; k++)
+	{
+	  if (p[k*2+1] == 0 || p[k*2+2] == 0)
+	    {
+	      error ("Emulator reply is too short: %s", buf);
+	    }
+	  registers[r++] = fromhex (buf[k*2+1]) * 16 + fromhex (buf[k*2+2]);
+	}    
+    }
+}
+
+/* Store register value, located in REGISTER, on the target processor.
+   regno - the register-number of the register to store
+           (-1 means store them all)
+   FIXME: Return errno value.  */
+
+static void
+es1800_store_register(regno)
+     int regno;
+{
+
+  static char regtab[18][4] =
+    {
+      "D0 ", "D1 ", "D2 ", "D3 ", "D4 ", "D5 ", "D6 ", "D7 ",
+      "A0 ", "A1 ", "A2 ", "A3 ", "A4 ", "A5 ", "A6 ", "SSP",
+      "SR ", "PC "
+    };
+
+  char buf[PBUFSIZ];
+  char SR_buf[PBUFSIZ];
+  char stack_pointer[4];
+  char *p;
+  int i;
+  int j;
+  int k;
+  unsigned char *r;
+
+  r = (unsigned char *) registers;
+
+  if (regno == -1)  /* write all registers */
+    {
+      j = 0;
+      k = 18;
+    }
+  else              /* write one register */
+    {
+      j = regno;
+      k = regno+1;
+      r += regno * 4; 
+    }    
+
+  if ((regno == -1) || (regno == 15))
+    {
+      /* fetch current status */
+      send_with_reply ("SR", SR_buf, sizeof (SR_buf));
+      p = SR_buf;
+      p += 5;
+      if (m68020)
+	{
+	  if (*p == '3') /* use masterstackpointer MSP */
+	    {
+	      strcpy (stack_pointer,"MSP");  
+	    }
+	  else
+	    {
+	      if (*p == '2') /* use interruptstackpointer ISP  */
+		{
+		  strcpy (stack_pointer,"ISP");  
+		}
+	      else
+		{
+		  strcpy (stack_pointer,"USP");  /* use userstackpointer USP  */
+		}
+	    }
+	}
+      else  /* 68000-mode */
+	{
+	  if (*p == '2') /* use supervisorstackpointer SSP  */
+	    {
+	      strcpy (stack_pointer,"SSP");  
+	    }
+	  else
+	    {
+	      strcpy (stack_pointer,"USP");/* use userstackpointer USP  */  
+	    }
+	}
+      strcpy (regtab[15],stack_pointer);
+    }
+
+  for (i = j; i<k; i++)
+    {
+      buf[0] = regtab[i][0];
+      buf[1] = regtab[i][1];
+      buf[2] = regtab[i][2];
+      buf[3] = '=';
+      buf[4] = '$';
+      buf[5] = tohex ((*r >> 4) & 0x0f);
+      buf[6] = tohex (*r++ & 0x0f);
+      buf[7] = tohex ((*r >> 4) & 0x0f);
+      buf[8] = tohex (*r++ & 0x0f);
+      buf[9] = tohex ((*r >> 4) & 0x0f);
+      buf[10] = tohex (*r++ & 0x0f);
+      buf[11] = tohex ((*r >> 4) & 0x0f);
+      buf[12] = tohex (*r++ & 0x0f);
+      buf[13] = 0;
+
+      send_with_reply (buf, buf, sizeof (buf)); /* FIXME, reply not used? */
+    }
+}
+
+
+/* Prepare to store registers.  */
+
+static void 
+es1800_prepare_to_store ()
+{
+  /* Do nothing, since we can store individual regs */
+}
+
+/* Convert hex digit A to a number.  */
+
+static int
+fromhex (a)
+     int a;
+{
+  if (a >= '0' && a <= '9')
+    {
+      return a - '0';
+    }
+  else if (a >= 'a' && a <= 'f')
+    {
+      return a - 'a' + 10;
+    }
+  else if (a >= 'A' && a <= 'F')
+    {
+      return a - 'A' + 10;
+    }
+  else
+    {
+      error ("Reply contains invalid hex digit");
+    }
+  return (-1);
+}
+
+
+/* Convert number NIB to a hex digit.  */
+
+static int
+tohex (nib)
+     int nib;
+{
+  if (nib < 10)
+    {
+      return ('0' + nib);
+    }
+  else
+    {
+      return ('A' + nib - 10);
+    }
+}
+
+/* Read or write LEN bytes from inferior memory at MEMADDR, transferring
+   to or from debugger address MYADDR.  Write to inferior if WRITE is
+   nonzero.  Returns length of data written or read; 0 for error. 
+ 
+   memaddr - the target's address
+   myaddr  - gdb's address
+   len     - number of bytes 
+   write   - write if != 0 otherwise read	*/
+
+static int
+es1800_xfer_inferior_memory (memaddr, myaddr, len, write, tops)
+     CORE_ADDR memaddr;
+     char *myaddr;
+     int len;
+     int write;
+     struct target_ops *tops;	/* Unused */
+{
+  int origlen = len;
+  int xfersize;
+
+  while (len > 0)
+    {
+      xfersize = len > MAXBUFBYTES ? MAXBUFBYTES : len;
+      if (write)
+	{
+	  es1800_write_bytes (memaddr, myaddr, xfersize);
+	}
+      else
+	{
+	  es1800_read_bytes (memaddr, myaddr, xfersize);
+	}
+      memaddr += xfersize;
+      myaddr += xfersize;
+      len -= xfersize;
+    }
+  return (origlen); /* no error possible */
+}
+
+
+/* Write memory data directly to the emulator.
+   This does not inform the data cache; the data cache uses this.
+   MEMADDR is the address in the remote memory space.
+   MYADDR is the address of the buffer in our space.
+   LEN is the number of bytes.
+ 
+   memaddr - the target's address
+   myaddr  - gdb's address
+   len     - number of bytes   */
+
+static void
+es1800_write_bytes (memaddr, myaddr, len)
+     CORE_ADDR memaddr;
+     char *myaddr;
+     int len;
+{
+  char buf[PBUFSIZ];
+  int i;
+  char *p;
+
+  p = myaddr;
+  for (i = 0; i < len; i++)
+    {
+      sprintf (buf, "@.B$%x=$%x", memaddr+i, (*p++) & 0xff);
+      send_with_reply (buf, buf, sizeof (buf));      /* FIXME send_command? */
+    }
+}
+
+
+/* Read memory data directly from the emulator.
+   This does not use the data cache; the data cache uses this.
+ 
+   memaddr - the target's address
+   myaddr  - gdb's address
+   len     - number of bytes   */
+
+static void
+es1800_read_bytes (memaddr, myaddr, len)
+     CORE_ADDR memaddr;
+     char *myaddr;
+     int len;
+{
+  static int DB_tab[16] = {8,11,14,17,20,23,26,29,34,37,40,43,46,49,52,55};
+  char buf[PBUFSIZ];
+  int i;
+  int low_addr;
+  char *p;
+  char *b;
+
+  if (len > PBUFSIZ / 2 - 1)
+    {
+      abort ();
+    }
+
+  if (len == 1)	/* The emulator does not like expressions like:  */
+    {
+      len = 2;	/* DB.B $20018 TO $20018                       */
+    }
+
+  /* Reply describes registers byte by byte, each byte encoded as two hex
+     characters.  */
+
+  sprintf (buf, "DB.B $%x TO $%x", memaddr, memaddr+len-1);
+  send_with_reply (buf, buf, sizeof (buf));
+  b = buf;
+  low_addr = memaddr&0x0f;
+  for (i = low_addr; i < low_addr + len; i++)
+    {
+      if ((!(i % 16)) && i)
+	{   /* if (i = 16,32,48)  */
+	  while (*p++!='\n') {;}
+	  b = p;
+	}
+      p = b + DB_tab[i%16] + (m68020 ? 2 : 0);
+      if (p[0] == 32 || p[1] == 32)
+	{
+	  error ("Emulator reply is too short: %s", buf);
+	}
+      myaddr[i-low_addr] = fromhex (p[0]) * 16 + fromhex (p[1]);
+    }
+}
+
+/* Information about the current target  */
+
+static void
+es1800_files_info (tops)
+     struct target_ops *tops;	/* Unused */
+{
+  printf ("ES1800 Attached to %s at %d baud in %s mode\n", savename, 19200,
+	  MODE);
+}
+
+
+/* We read the contents of the target location and stash it,
+   then overwrite it with a breakpoint instruction.
+ 
+   addr           - is the target location in the target machine.
+   contents_cache - is a pointer to memory allocated for saving the target contents.
+                    It is guaranteed by the caller to be long enough to save sizeof 
+                    BREAKPOINT bytes.
+ 
+   FIXME: This size is target_arch dependent and should be available in
+   the target_arch transfer vector, if we ever have one...  */
+
+static int
+es1800_insert_breakpoint (addr, contents_cache)
+     CORE_ADDR addr;
+     char *contents_cache;
+{
+  int val; 
+
+  val = target_read_memory (addr, contents_cache, sizeof (es1800_break_insn));
+
+  if (val == 0)
+    {
+      val = target_write_memory (addr, es1800_break_insn,
+				 sizeof (es1800_break_insn));
+    }
+
+  return (val);
+}
+
+
+/* Write back the stashed instruction
+ 
+   addr           - is the target location in the target machine.
+   contents_cache - is a pointer to memory allocated for saving the target contents.
+                    It is guaranteed by the caller to be long enough to save sizeof 
+                    BREAKPOINT bytes.	*/
+ 
+static int
+es1800_remove_breakpoint (addr, contents_cache)
+     CORE_ADDR addr;
+     char *contents_cache;
+{
+
+  return (target_write_memory (addr, contents_cache,
+			       sizeof (es1800_break_insn)));
+}
+
+/* create_break_insn ()
+   Primitive datastructures containing the es1800 breakpoint instruction  */
+
+static void
+es1800_create_break_insn (ins, vec)
+     char *ins;
+     int vec;
+{
+  if (vec == 15)
+    {
+      ins[0] = 0x4e;
+      ins[1] = 0x4f;
+    }
+}
+
+
+/* verify_break ()
+   Seach for breakpoint routine in emulator memory.
+   returns non-zero on failure
+   vec - trap vector used for breakpoints  */
+
+static int
+verify_break (vec)
+     int vec;
+{
+  CORE_ADDR memaddress;
+  char buf[8];
+  char *instr = "NqNqNqNs";      /* breakpoint routine */
+  int status;
+
+  get_break_addr (vec, &memaddress);
+
+  if (memaddress)
+    {
+      status = target_read_memory (memaddress, buf, 8); 
+      if (status != 0)
+	{
+	  memory_error (status, memaddress);
+	}
+      return (strcmp (instr, buf));
+    }
+    return (-1);
+}
+
+
+/* get_break_addr ()
+   find address of breakpint routine
+   vec - trap vector used for breakpoints
+   addrp - store the address here	*/
+
+static void
+get_break_addr (vec, addrp)
+     int vec;
+     CORE_ADDR *addrp;
+{
+  CORE_ADDR memaddress = 0;
+  int status;
+  int k;
+  char buf[PBUFSIZ];
+  char base_addr[4];
+  char *p;
+
+  if (m68020)
+    {
+      send_with_reply ("VBR ", buf, sizeof (buf));
+      p = buf;
+      for (k = 0; k < 4; k++)
+	{
+	  if ((p[k*2 + 1] == 0) || (p[k*2 + 2] == 0))
+	    {
+	      error ("Emulator reply is too short: %s", buf);
+	    }
+	  base_addr[k] = (fromhex (p[k*2 + 1]) * 16) + fromhex (p[k*2 + 2]);
+	}
+      /* base addr of exception vector table */
+      memaddress = *((CORE_ADDR *) base_addr);
+    }
+
+    memaddress += (vec + 32) * 4;     /* address of trap vector */
+    status = target_read_memory (memaddress, (char *) addrp, 4); 
+    if (status != 0)                                                   
+      {
+	memory_error (status, memaddress);
+      }
+}
+
+
+/* Kill an inferior process */
+
+static void
+es1800_kill ()
+{
+  if (inferior_pid != 0)
+    {
+      inferior_pid = 0;
+      es1800_mourn_inferior ();
+    }
+}
+
+
+/* Load a file to the ES1800 emulator. 
+   Converts the file from a.out format into Extended Tekhex format
+   before the file is loaded.
+   Also loads the trap routine, and sets the ES1800 breakpoint on it
+   filename - the a.out to be loaded
+   from_tty - says whether to be verbose or not
+   FIXME Uses emulator overlay memory for trap routine	*/
+ 
+static void
+es1800_load (filename, from_tty)
+     char *filename;
+     int from_tty;
+{
+
+  FILE *instream;
+  char loadname[15];
+  char buf[160];
+  struct cleanup *old_chain;
+  int es1800_load_format = 5;
+
+  if (es1800_desc < 0) 
+    {
+      printf ("No emulator attached, type emulator-command first\n");
+      return;
+    }
+
+  filename = tilde_expand (filename);
+  make_cleanup (free, filename);
+
+  switch (es1800_load_format)
+    {
+      case 2:   /* Extended Tekhex  */
+        if (from_tty)
+	  {
+	    printf ("Converting \"%s\" to Extended Tekhex Format\n", filename);
+	  }
+	sprintf (buf, "tekhex %s", filename);
+	system (buf);
+	sprintf (loadname, "out.hex");
+	break;
+
+      case 5:   /* Motorola S-rec  */
+	if (from_tty)
+	  {
+	    printf ("Converting \"%s\" to Motorola S-record format\n",
+		    filename);
+	  }
+	/* in the future the source code in copy (part of binutils-1.93) will
+	   be included in this file */
+	sprintf (buf,
+		 "copy -s \"a.out-sunos-big\" -d \"srec\" %s /tmp/out.hex",
+		 filename);
+	system (buf);
+	sprintf (loadname, "/tmp/out.hex");
+	break;
+
+      default:
+	error ("Downloading format not defined\n");
+    }
+ 
+  mark_breakpoints_out ();
+  inferior_pid = 0;
+  if (from_tty)
+    {
+      printf ("Downloading \"%s\" to the ES 1800\n",filename);
+    }
+  if ((instream = fopen (loadname, "r")) == NULL)
+    {
+      perror_with_name ("fopen:");
+    }
+
+  old_chain = make_cleanup (fclose, instream);
+  immediate_quit++;
+
+  es1800_reset (0);
+
+  download (instream, from_tty, es1800_load_format);
+
+  /* if breakpoint routine is not present anymore we have to check 
+     whether to download a new breakpoint routine or not */
+
+  if ((verify_break (es1800_break_vec) != 0)
+      && query ("No breakpoint routine in ES 1800 emulator!\nDownload a breakpoint routine to the emulator? "))
+    {
+      char buf[128];
+      printf ("Using break vector 0x%x\n", es1800_break_vec);
+      sprintf (buf, "0x%x ", es1800_break_vec);
+      printf ("Give the start address of the breakpoint routine: ");
+      fgets (buf + strlen (buf), sizeof (buf) - strlen (buf), stdin);
+      es1800_init_break (buf, 0);
+    }
+
+  do_cleanups (old_chain);
+  expect_prompt ();
+  readchar ();  /* FIXME I am getting a ^G = 7 after the prompt  */
+  printf ("\n");
+
+  if (fclose (instream) == EOF)
+    {
+      ;
+    }
+
+  if (es1800_load_format != 2)
+    {
+      sprintf (buf, "/usr/bin/rm %s", loadname);
+      system (buf);
+    }
+
+  symbol_file_command (filename, from_tty);   /* reading symbol table */
+  immediate_quit--;
+}
+
+#if 0
+
+#define NUMCPYBYTES 20
+
+static void
+bfd_copy (from_bfd, to_bfd)
+     bfd *from_bfd;
+     bfd *to_bfd;
+{
+  asection *p, *new;
+  int i;
+  char buf[NUMCPYBYTES];
+
+  for (p = from_bfd->sections; p != NULL; p = p->next)
+    {
+      printf ("  Copying section %s. Size = %x.\n", p->name, p->_cooked_size);
+      printf ("    vma = %x,  offset = %x,  output_sec = %x\n",
+	      p->vma, p->output_offset, p->output_section);
+      new = bfd_make_section (to_bfd, p->name);
+      if (p->_cooked_size &&
+	  !bfd_set_section_size (to_bfd, new, p->_cooked_size))
+	{
+	  error ("Wrong BFD size!\n");
+	}
+      if (!bfd_set_section_flags (to_bfd, new, p->flags))
+	{
+	  error ("bfd_set_section_flags");
+	}
+      new->vma = p->vma;
+      
+      for (i = 0; (i + NUMCPYBYTES) < p->_cooked_size ; i += NUMCPYBYTES)
+	{
+	  if (!bfd_get_section_contents (from_bfd, p, (PTR) buf, (file_ptr) i,
+					(bfd_size_type) NUMCPYBYTES))
+	    {
+	      error ("bfd_get_section_contents\n");
+	    }
+	if (!bfd_set_section_contents (to_bfd, new, (PTR) buf, (file_ptr) i,
+				      (bfd_size_type) NUMCPYBYTES))
+	  {
+	    error ("bfd_set_section_contents\n");
+	  }
+      }
+      bfd_get_section_contents (from_bfd, p, (PTR) buf, (file_ptr) i,
+				(bfd_size_type) (p->_cooked_size - i));
+      bfd_set_section_contents (to_bfd, new, (PTR) buf,(file_ptr) i,
+				(bfd_size_type) (p->_cooked_size - i));
+    }
+}
+
+#endif
+
+/* Start an process on the es1800 and set inferior_pid to the new
+   process' pid.
+   execfile - the file to run
+   args     - arguments passed to the program
+   env      - the environment vector to pass	*/
+
+static void
+es1800_create_inferior (execfile, args, env)
+     char *execfile;
+     char *args;
+     char **env;
+{
+  int entry_pt;
+  int pid;
+#if 0
+  struct expression *expr;
+  register struct cleanup *old_chain = 0;
+  register value val;
+#endif
+
+  if (args && *args)
+    {
+      error ("Can't pass arguments to remote ES1800 process");
+    }
+
+#if 0
+  if (query ("Use 'start' as entry point? "))
+    {
+      expr = parse_c_expression ("start");
+      old_chain = make_cleanup (free_current_contents, &expr);
+      val = evaluate_expression (expr);
+      entry_pt = (val->location).address;
+    }
+  else
+    {
+      printf ("Enter the program's entry point (in hexadecimal): ");
+      scanf ("%x", &entry_pt);
+    }
+#endif
+
+  if (execfile == 0 || exec_bfd == 0)
+    {
+      error ("No exec file specified");
+    }
+
+  entry_pt = (int) bfd_get_start_address (exec_bfd);
+
+  pid = 42;
+
+  /* Now that we have a child process, make it our target.  */
+
+  push_target (&es1800_child_ops);
+
+  /* The "process" (board) is already stopped awaiting our commands, and
+     the program is already downloaded.  We just set its PC and go.  */
+
+  inferior_pid = pid;		/* Needed for wait_for_inferior below */
+
+  clear_proceed_status ();
+
+  /* Tell wait_for_inferior that we've started a new process.  */
+
+  init_wait_for_inferior ();
+
+  /* Set up the "saved terminal modes" of the inferior
+     based on what modes we are starting it with.  */
+
+  target_terminal_init ();
+
+  /* Install inferior's terminal modes.  */
+
+  target_terminal_inferior ();
+
+  /* remote_start (args); */
+  /* trap_expected = 0; */
+  /* insert_step_breakpoint ();  FIXME, do we need this?  */
+
+  proceed ((CORE_ADDR) entry_pt, -1, 0);		/* Let 'er rip... */
+
+}
+
+
+/* The process has died, clean up.  */
+
+static void
+es1800_mourn_inferior ()
+{
+  remove_breakpoints ();
+  unpush_target (&es1800_child_ops);
+  generic_mourn_inferior ();	/* Do all the proper things now */
+}
+
+/* ES1800-protocol specific routines */
+
+/* Keep discarding input from the remote system, until STRING is found. 
+   Let the user break out immediately. 
+   string - the string to expect
+   nowait - break out if string not the emulator's first respond otherwise
+            read until string is found (== 0)   */
+ 
+static void
+expect (string, nowait)
+     char *string;
+    int nowait;
+{
+  char c;
+  char *p = string;
+
+  immediate_quit++;
+  while (1)
+    {
+      c = readchar ();
+      if (isalpha (c))
+	{
+	  c = toupper (c);
+	}
+      if (c == toupper (*p))
+	{
+	  p++;
+	  if (*p == '\0')
+	    {
+	      immediate_quit--;
+	      return;
+	    }
+	}
+      else if (!nowait)
+	{
+	  p = string;
+	}
+      else
+	{
+	  printf ("\'%s\' expected\n" , string);
+	  printf ("char %d is %d", p - string, c);
+	  error ("\n" );
+	}
+    }
+}
+
+/* Keep discarding input until we see the prompt.  */
+
+static void
+expect_prompt ()
+{
+  expect (">", 0);
+}
+
+
+/* Read one character */
+
+#ifdef DEBUG_STDIN
+
+/* read from stdin */
+
+static int
+readchar ()
+{
+  char buf[1];
+
+  buf[0] = '\0';
+  printf ("readchar, give one character\n");
+  read (0, buf, 1);
+
+#if defined (LOG_FILE)
+  putc (buf[0] & 0x7f, log_file);
+#endif
+
+  return (buf[0] & 0x7f);
+}
+
+#else	/* !DEBUG_STDIN */
+
+/* Read a character from the remote system, doing all the fancy
+   timeout stuff.  */
+
+static int
+readchar ()
+{
+  char buf[1];
+
+  buf[0] = '\0';
+
+#ifdef HAVE_TERMIO
+
+  /* termio does the timeout for us.  */
+  read (es1800_desc, buf, 1);
+
+#else
+
+  alarm (timeout);
+  while (read (es1800_desc, buf, 1) != 1)
+    {
+      if (errno == EINTR)
+	{
+	  error ("Timeout reading from remote system.");
+	}
+      else if (errno != EWOULDBLOCK)
+	{
+	  perror_with_name ("remote read");
+	}
+    }
+  alarm (0);
+#endif
+
+#if defined (LOG_FILE)
+  putc (buf[0] & 0x7f, log_file);
+  fflush (log_file);
+#endif
+
+  return (buf[0] & 0x7f);
+}
+
+#endif	/* DEBUG_STDIN */
+
+
+/* Send a command to the emulator and save the reply.
+   Report an error if we get an error reply.
+   string - the es1800 command
+   buf    - containing the emulator reply on return
+   len    - size of buf  */
+
+static void
+send_with_reply (string, buf, len)
+    char *string, *buf;
+    int len;
+{
+  send (string);
+  write (es1800_desc, "\r", 1);
+
+#ifndef DEBUG_STDIN
+  expect (string, 1);
+  expect ("\r\n", 0);
+#endif
+
+  getmessage (buf, len);
+}
+
+
+/* Send the command in STR to the emulator adding \r. check
+   the echo for consistency. 
+   string - the es1800 command  */
+ 
+static void
+send_command (string)
+     char *string;
+{
+  send (string);
+  write (es1800_desc, "\r", 1);
+
+#ifndef DEBUG_STDIN
+  expect (string, 0);
+  expect_prompt ();
+#endif
+
+}
+
+/* Send a string
+   string - the es1800 command  */
+
+static void
+send (string)
+     char *string;
+{
+  if (kiodebug) 
+    {
+      fprintf (stderr, "Sending: %s\n", string);
+    }
+  write (es1800_desc, string, strlen (string));
+}
+
+
+/* Read a message from the emulator and store it in BUF. 
+   buf    - containing the emulator reply on return
+   len    - size of buf  */
+ 
+static void
+getmessage (buf, len)
+     char *buf;
+     int len;
+{
+  char *bp;
+  int c;
+  int prompt_found = 0;
+  extern kiodebug;
+
+#if defined (LOG_FILE)
+  /* This is a convenient place to do this.  The idea is to do it often
+     enough that we never lose much data if we terminate abnormally.  */
+  fflush (log_file);
+#endif
+
+  bp = buf;
+  c = readchar ();
+  do
+    {
+      if (c) 
+	{
+	  if (len-- < 2) /* char and terminaling NULL */
+	    {
+	      error ("input buffer overrun\n");
+	    }
+	  *bp++ = c;
+	}
+      c = readchar ();
+      if ((c == '>') && (*(bp - 1) == ' '))
+	{
+	  prompt_found = 1;
+	}
+    }
+  while (!prompt_found);
+  *bp = 0;
+  
+  if (kiodebug)
+    {
+      fprintf (stderr,"message received :%s\n", buf);
+    }
+}
+
+static void
+download (instream, from_tty, format)
+FILE *instream;
+     int from_tty;
+     int format;
+{
+  char c;
+  char buf[160];
+  int i = 0;
+
+  send_command ("SET #2,$1A");                  /* reset char = ^Z */
+  send_command ("SET #3,$11,$13");              /* XON  XOFF */
+  if (format == 2)
+    {
+      send_command ("SET #26,#2");
+    }
+  else
+    {
+      send_command ("SET #26,#5");		/* Format=Extended Tekhex */
+    }
+  send_command ("DFB = $10");
+  send_command ("PUR");
+  send_command ("CES");
+  send ("DNL\r");
+  expect ("DNL", 1);
+  if (from_tty)
+    {
+      printf ("    0 records loaded...\r");
+    }
+  while (fgets (buf, 160, instream))
+      {
+	send (buf);
+	if (from_tty)
+	  {
+	    printf ("%5d\b\b\b\b\b",++i);
+	    fflush (stdout);
+	  }
+	if ((c = readchar ()) != 006) 
+	  {
+	    error ("expected ACK");
+	  }
+      }
+  if (from_tty)
+    {
+      printf ("- All");
+    }
+}
+
+/* Additional commands */
+
+/* Talk directly to the emulator
+   FIXME, uses busy wait, and is SUNOS (or at least BSD) specific  */
+
+/*ARGSUSED*/
+static void 
+es1800_transparent (args, from_tty)
+     char *args;
+     int from_tty;
+{
+  int console;
+  struct sgttyb modebl;
+  int fcflag;
+  int cc;
+  struct sgttyb console_mode_save;
+  int console_fc_save;
+  int es1800_fc_save;
+  int inputcnt = 80;
+  char inputbuf[80];
+  int consolecnt = 0;
+  char consolebuf[80];
+  int es1800_cnt = 0;
+  char es1800_buf[80];
+  int i;
+
+  dont_repeat ();
+  if (es1800_desc < 0) 
+    {
+      printf ("No emulator attached, type emulator-command first\n");
+      return;
+    }
+
+  printf ("\n");
+  printf ("You are now communicating directly with the ES 1800 emulator.\n");
+  printf ("To leave this mode (transparent mode), press ^E.\n");
+  printf ("\n");
+  printf (" >");
+  fflush (stdout);
+
+  if ((console = open ("/dev/tty", O_RDWR)) == -1) 
+    {
+      perror_with_name ("/dev/tty:");
+    }
+
+  if ((fcflag = fcntl (console, F_GETFL, 0)) == -1)
+    {
+      perror_with_name ("fcntl console");
+    }
+
+  console_fc_save = fcflag;
+  fcflag = fcflag | FNDELAY;
+
+  if (fcntl (console, F_SETFL, fcflag) == -1)
+    {
+      perror_with_name ("fcntl console");
+    }
+
+  if (ioctl (console, TIOCGETP, &modebl))
+    {
+      perror_with_name ("ioctl console");
+    }
+
+  console_mode_save = modebl;
+  modebl.sg_flags = RAW; 
+
+  if (ioctl (console, TIOCSETP, &modebl))
+    {
+      perror_with_name ("ioctl console");
+    }
+
+  if ((fcflag = fcntl (es1800_desc, F_GETFL, 0)) == -1)
+    {
+      perror_with_name ("fcntl serial");
+    }
+
+  es1800_fc_save = fcflag;
+  fcflag = fcflag | FNDELAY;
+
+  if (fcntl (es1800_desc, F_SETFL, fcflag) == -1)
+    {
+      perror_with_name ("fcntl serial");
+    }
+
+  while (1)
+    { 
+      cc = read (console, inputbuf, inputcnt);
+      if (cc != -1)
+	{
+	  if ((*inputbuf & 0x7f) == 0x05)
+	    {
+	      break;
+	    }
+	  for (i = 0; i < cc; )
+	    {
+	      es1800_buf[es1800_cnt++] = inputbuf[i++];
+	    }
+	  if ((cc = write (es1800_desc, es1800_buf, es1800_cnt)) == -1)
+	    {
+	      perror_with_name ("FEL! read:");
+	    }
+	  es1800_cnt -= cc;
+	  if (es1800_cnt && cc) 
+	    {
+	      for (i = 0; i < es1800_cnt; i++)
+		{
+		  es1800_buf[i] = es1800_buf[cc+i];
+		}
+	    }
+	}
+      else if (errno != EWOULDBLOCK)
+	{
+	  perror_with_name ("FEL! read:");
+	}
+      
+      cc = read (es1800_desc,inputbuf,inputcnt);
+      if (cc != -1)
+	{
+	  for (i = 0; i < cc; )
+	    {
+	      consolebuf[consolecnt++] = inputbuf[i++];
+	    }
+	  if ((cc = write (console,consolebuf,consolecnt)) == -1)
+	    {
+	      perror_with_name ("FEL! write:");
+	    }
+	  consolecnt -= cc;
+	  if (consolecnt && cc) 
+	    {
+	      for (i = 0; i < consolecnt; i++)
+		{
+		  consolebuf[i] = consolebuf[cc+i];
+		}
+	    }
+	}
+      else if (errno != EWOULDBLOCK)
+	{
+	  perror_with_name ("FEL! read:");
+	}
+    }
+
+  console_fc_save = console_fc_save & !FNDELAY;
+  if (fcntl (console, F_SETFL, console_fc_save) == -1)
+    {
+      perror_with_name ("FEL! fcntl");
+    }
+
+  if (ioctl (console, TIOCSETP, &console_mode_save))
+    {
+      perror_with_name ("FEL! ioctl");
+    }
+
+  close (console);
+
+  if (fcntl (es1800_desc, F_SETFL, es1800_fc_save) == -1)
+    {
+      perror_with_name ("FEL! fcntl");
+    }
+
+  printf ("\n");
+
+}
+
+static void
+es1800_init_break (args, from_tty)
+     char *args;
+     int from_tty;
+{
+  CORE_ADDR memaddress = 0;
+  char buf[PBUFSIZ];
+  char base_addr[4];
+  char *space_index;
+  char *p;
+  int k;
+
+  if (args == NULL)
+    {
+      error_no_arg ("a trap vector");
+    }
+
+  if (!(space_index = strchr (args, ' ')))
+    {
+      error ("Two arguments needed (trap vector and address of break routine).\n");
+    }
+
+  *space_index = '\0';
+
+  es1800_break_vec = strtol (args, (char **) NULL, 0);
+  es1800_break_address = parse_and_eval_address (space_index + 1);
+
+  es1800_create_break_insn (es1800_break_insn, es1800_break_vec);
+
+  if (m68020)
+    {
+      send_with_reply ("VBR ", buf, sizeof (buf));
+      p = buf;
+      for (k = 0; k < 4; k++)
+	{
+	  if ((p[k*2 + 1] == 0) || (p[k*2 + 2] == 0))
+	    {
+	      error ("Emulator reply is too short: %s", buf);
+	    }
+	  base_addr[k] = (fromhex (p[k*2 + 1]) * 16) + fromhex (p[k*2 + 2]);
+	}
+      /* base addr of exception vector table */
+      memaddress =  *((CORE_ADDR *) base_addr);
+    }
+
+  memaddress += (es1800_break_vec + 32) * 4;     /* address of trap vector */
+
+  sprintf (buf, "@.L%lx=$%lx", memaddress, es1800_break_address);
+  send_command (buf);   /* set the address of the break routine in the */
+  		       /* trap vector */
+  
+  sprintf (buf, "@.L%lx=$4E714E71", es1800_break_address);      /* NOP; NOP */
+  send_command (buf);
+  sprintf (buf, "@.L%lx=$4E714E73", es1800_break_address + 4);  /* NOP; RTE */
+  send_command (buf);
+  
+  sprintf (buf, "AC2=$%lx", es1800_break_address + 4);
+  /* breakpoint at es1800-break_address */
+  send_command (buf);
+  send_command ("WHEN AC2 THEN BRK");          /* ie in exception routine */
+
+  if (from_tty)
+    {
+      printf ("Breakpoint (trap $%x) routine at address: %lx\n",
+	      es1800_break_vec, es1800_break_address);
+    }
+}	  
+
+static void
+es1800_child_open (arg, from_tty)
+     char *arg;
+     int from_tty;
+{
+  error ("Use the \"run\" command to start a child process.");
+}
+
+static void
+es1800_child_detach (args, from_tty)
+     char *args;
+     int from_tty;
+{
+  if (args)
+    {
+      error ("Argument given to \"detach\" when remotely debugging.");
+    }
+  
+  pop_target ();
+  if (from_tty)
+    {
+      printf ("Ending debugging the process %d.\n", inferior_pid);
+    }
+}
+
+
+/* Define the target subroutine names  */
+
+static struct target_ops es1800_ops =
+{
+  "es1800",			/* to_shortname */
+				/* to_longname */
+  "Remote serial target in ES1800-emulator protocol",
+  				/* to_doc */
+  "Remote debugging on the es1800 emulator via a serial line.\n\
+Specify the serial device it is connected to (e.g. /dev/ttya).",
+  es1800_open,			/* to_open */
+  es1800_close,			/* to_close */
+  es1800_attach,		/* to_attach */
+  es1800_detach,		/* to_detach */
+  es1800_resume,		/* to_resume */
+  NULL,				/* to_wait */
+  NULL,				/* to_fetch_registers */
+  NULL,				/* to_store_registers */
+  es1800_prepare_to_store,	/* to_prepare_to_store */
+  NULL,				/* to_convert_to_virtual */
+  NULL,				/* to_convert_from_virtual */
+  es1800_xfer_inferior_memory,	/* to_xfer_memory */
+  es1800_files_info,		/* to_files_info */
+  es1800_insert_breakpoint,	/* to_insert_breakpoint */
+  es1800_remove_breakpoint,	/* to_remove_breakpoint */
+  NULL,				/* to_terminal_init */
+  NULL,				/* to_terminal_inferior */
+  NULL,				/* to_terminal_ours_for_output */
+  NULL,				/* to_terminal_ours */
+  NULL,				/* to_terminal_info */
+  NULL,				/* to_kill */
+  es1800_load,			/* to_load */
+  NULL,				/* to_lookup_symbol */
+  es1800_create_inferior,	/* to_create_inferior */
+  NULL,				/* to_mourn_inferior */
+  core_stratum,			/* to_stratum */
+  0,				/* to_next */
+  0,				/* to_has_all_memory */
+  1,				/* to_has_memory */
+  0,				/* to_has_stack */
+  0,				/* to_has_registers */
+  0,				/* to_has_execution */
+  NULL,				/* to_sections */
+  NULL,				/* to_sections_end */
+  OPS_MAGIC			/* to_magic (always last) */
+};
+
+/* Define the target subroutine names  */
+
+static struct target_ops es1800_child_ops =
+{
+  "es1800_process",		/* to_shortname */
+  				/* to_longname */
+  "Remote serial target in ES1800-emulator protocol",
+				/* to_doc */
+  "Remote debugging on the es1800 emulator via a serial line.\n\
+Specify the serial device it is connected to (e.g. /dev/ttya).",
+  es1800_child_open,		/* to_open */
+  NULL,				/* to_close */
+  es1800_attach,		/* to_attach */
+  es1800_child_detach,		/* to_detach */
+  es1800_resume,		/* to_resume */
+  es1800_wait,			/* to_wait */
+  es1800_fetch_register,	/* to_fetch_registers */
+  es1800_store_register,	/* to_store_registers */
+  es1800_prepare_to_store,	/* to_prepare_to_store */
+  NULL,				/* to_convert_to_virtual */
+  NULL,				/* to_convert_from_virtual */
+  es1800_xfer_inferior_memory,	/* to_xfer_memory */
+  es1800_files_info,		/* to_files_info */
+  es1800_insert_breakpoint,	/* to_insert_breakpoint */
+  es1800_remove_breakpoint,	/* to_remove_breakpoint */
+  NULL,				/* to_terminal_init */
+  NULL,				/* to_terminal_inferior */
+  NULL,				/* to_terminal_ours_for_output */
+  NULL,				/* to_terminal_ours */
+  NULL,				/* to_terminal_info */
+  es1800_kill,			/* to_kill */
+  es1800_load,			/* to_load */
+  NULL,				/* to_lookup_symbol */
+  es1800_create_inferior,	/* to_create_inferior */
+  es1800_mourn_inferior,	/* to_mourn_inferior */
+  process_stratum,		/* to_stratum */
+  0,				/* to_next */
+  1,				/* to_has_all_memory */
+  1,				/* to_has_memory */
+  1,				/* to_has_stack */
+  1,				/* to_has_registers */
+  1,				/* to_has_execution */
+  NULL,				/* to_sections */
+  NULL,				/* to_sections_end */
+  OPS_MAGIC			/* to_magic (always last) */
+};
+
+/* _initialize_es1800 ()  */
+
+void
+_initialize_es1800 ()
+{
+  add_target (&es1800_ops);
+  add_target (&es1800_child_ops);
+  add_com ("transparent", class_support, es1800_transparent,
+	   "Start transparent communication with the ES 1800 emulator.");
+  add_com ("init_break", class_support, es1800_init_break,
+	   "Download break routine and initialize break facility on ES 1800");
+}
diff --git a/gdb/tm-es1800.h b/gdb/tm-es1800.h
new file mode 100644
index 0000000..67dc04e
--- /dev/null
+++ b/gdb/tm-es1800.h
@@ -0,0 +1,34 @@
+/* Parameters for execution on ES-1800 emulator for 68000.
+   The code was originally written by Johan Holmberg TT/SJ Ericsson Telecom
+   AB and later modified by Johan Henriksson TT/SJ. It was adapted to GDB 4.0
+   by Jan Norden TX/DK.
+   Copyright (C) 1986, 1987, 1989, 1991, 1992 Free Software Foundation, Inc.
+
+This file is part of GDB.
+
+GDB is free software; you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation; either version 1, or (at your option)
+any later version.
+
+GDB is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with GDB; see the file COPYING.  If not, write to
+the Free Software Foundation, 675 Mass Ave, Cambridge, MA 02139, USA.  */
+
+#define	GDBINIT_FILENAME	".esgdbinit"
+
+#define	DEFAULT_PROMPT		"(esgdb) "
+
+/* Kludge... */
+#include "tm-sun3.h"
+
+
+
+
+
+