Remote protocol for d10v. Mainly responsible for translating GDB d10v

addresses into those expected by the remote d10v monitor.

2 files changed, 280 insertions, 0 deletions

diff --git a/gdb/.Sanitize b/gdb/.Sanitize
index b34887b..c7a4f3c 100644
--- a/gdb/.Sanitize
+++ b/gdb/.Sanitize
@@ -331,6 +331,7 @@ rdi-share
 remote-adapt.c
 remote-array.c
 remote-bug.c
+remote-d10v.c
 remote-e7000.c
 remote-eb.c
 remote-es.c
diff --git a/gdb/remote-d10v.c b/gdb/remote-d10v.c
new file mode 100644
index 0000000..abdacd4
--- /dev/null
+++ b/gdb/remote-d10v.c
@@ -0,0 +1,279 @@
+/* Remote target communications for d10v connected via a serial line.
+   Copyright 1988, 1991, 1992, 1993, 1994, 1995, 1996, 1997 Free
+   Software Foundation, Inc.
+
+This file is part of GDB.
+
+This program is free software; you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation; either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program; if not, write to the Free Software
+Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  */
+
+#include "defs.h"
+#include "gdb_string.h"
+#include <fcntl.h>
+#include "frame.h"
+#include "inferior.h"
+#include "bfd.h"
+#include "symfile.h"
+#include "target.h"
+#include "wait.h"
+/*#include "terminal.h"*/
+#include "gdbcmd.h"
+#include "objfiles.h"
+#include "gdb-stabs.h"
+#include "gdbthread.h"
+
+#include "dcache.h"
+
+#ifdef USG
+#include <sys/types.h>
+#endif
+
+#include <signal.h>
+#include "serial.h"
+
+/* Prototypes for local functions */
+
+static int remote_d10v_xfer_memory PARAMS ((CORE_ADDR memaddr, char *myaddr,
+					    int len, int should_write,
+					    struct target_ops *target));
+
+static void remote_d10v_open PARAMS ((char *name, int from_tty));
+
+static void remote_d10v_mourn PARAMS ((void));
+
+static void initialize_remote_d10v_ops PARAMS ((int copy_remote));
+
+/* Define the target subroutine names */
+
+struct target_ops remote_d10v_ops;
+extern struct target_ops remote_ops;
+extern struct target_ops extended_remote_ops;
+struct target_ops *inherited_ops = &extended_remote_ops;
+
+void
+init_remote_d10v_ops (copy_remote)
+     int copy_remote;
+{
+  printf_filtered ("Opening d10v ...\n");
+  if (copy_remote)
+    memcpy (&remote_d10v_ops, inherited_ops, sizeof remote_d10v_ops);
+  remote_d10v_ops.to_shortname = "d10v";
+  remote_d10v_ops.to_longname = "Remote d10v serial target in gdb-specific protocol";
+  remote_d10v_ops.to_doc = "Use a remote d10v via a serial line, using a gdb-specific protocol.\n\
+Specify the serial device it is connected to (e.g. /dev/ttya).";
+  remote_d10v_ops.to_open = remote_d10v_open;
+  remote_d10v_ops.to_xfer_memory = remote_d10v_xfer_memory;
+  remote_d10v_ops.to_mourn_inferior = remote_d10v_mourn;
+  remote_d10v_ops.to_magic = OPS_MAGIC;
+}
+
+
+/* Open a connection to a remote debugger.
+   NAME is the filename used for communication.  */
+
+static void
+remote_d10v_open (name, from_tty)
+     char *name;
+     int from_tty;
+{
+  init_remote_d10v_ops (1);
+  open_remote_target (name, from_tty, &remote_d10v_ops,
+		      inherited_ops == &extended_remote_ops);
+}
+
+
+/* Worker function for remote_mourn.  */
+static void
+remote_d10v_mourn ()
+{
+  if (inherited_ops == &remote_ops)
+    {
+      unpush_target (&remote_d10v_ops);
+      generic_mourn_inferior ();
+    }
+  /* see remote.c:extended_remote_mourn() for why an extended remote
+     target doesn't mourn */
+}
+
+
+/* Read or write LEN bytes from inferior memory at MEMADDR, transferring
+   to or from debugger address MYADDR.  Write to inferior if SHOULD_WRITE is
+   nonzero.  Returns length of data written or read; 0 for error.  */
+
+/* ARGSUSED */
+static int
+remote_d10v_xfer_memory(memaddr, myaddr, nr_bytes, write_p, target)
+     CORE_ADDR memaddr;
+     char *myaddr;
+     int nr_bytes;
+     int write_p;
+     struct target_ops *target;			/* ignored */
+{
+  CORE_ADDR phys;
+  CORE_ADDR seg;
+  CORE_ADDR off;
+  char *from = "unknown";
+  char *to = "unknown";
+  unsigned short imap0 = read_register (IMAP0_REGNUM);
+  unsigned short imap1 = read_register (IMAP1_REGNUM);
+  unsigned short dmap = read_register (DMAP_REGNUM);
+
+  /* GDB interprets addresses as:
+
+       0x00xxxxxx: Logical data address segment        (DMAP translated memory)
+       0x01xxxxxx: Logical instruction address segment (IMAP translated memory)
+       0x10xxxxxx: Physical data memory segment        (On-chip data memory)
+       0x11xxxxxx: Physical instruction memory segment (On-chip insn memory)
+       0x12xxxxxx: Phisical unified memory segment     (Unified memory)
+
+     The remote d10v board interprets addresses as:
+
+       0x00xxxxxx: Phisical unified memory segment     (Unified memory)
+       0x01xxxxxx: Physical instruction memory segment (On-chip insn memory)
+       0x02xxxxxx: Physical data memory segment        (On-chip data memory)
+
+     Translate according to current IMAP/dmap registers */
+
+  enum {
+    targ_unified = 0x00000000,
+    targ_insn = 0x01000000,
+    targ_data = 0x02000000,
+  };
+
+  seg = (memaddr >> 24);
+  off = (memaddr & 0xffffffL);
+
+  switch (seg) 
+      {
+      case 0x00: /* in logical data address segment */
+	{
+	  from = "logical-data";
+	  if (off <= 0x7fffL)
+	    {
+	      /* On chip data */
+	      phys = targ_data + off;
+	      if (off + nr_bytes > 0x7fffL)
+		/* don't cross VM boundary */
+		nr_bytes = 0x7fffL - off + 1;
+	      to = "chip-data";
+	    }
+	  else if (off <= 0xbfffL)
+	    {
+	      short map = dmap;
+	      if (map & 0x1000)
+		{
+		  /* Instruction memory */
+		  phys = targ_insn | ((map & 0xf) << 14) | (off & 0x3fff);
+		  to = "chip-insn";
+		}
+	      else
+		{
+		  /* Unified memory */
+		  phys = targ_unified | ((map & 0x3ff) << 14) | (off & 0x3fff);
+		  to = "unified";
+		}
+	      if (off + nr_bytes > 0xbfffL)
+		/* don't cross VM boundary */
+		nr_bytes = (0xbfffL - off + 1);
+	    }	    
+	  else
+	    {
+	      /* Logical address out side of data segments, not supported */
+	      return (0);
+	    }
+	  break;
+	}
+
+      case 0x01: /* in logical instruction address segment */
+	{
+	  short map;
+	  from = "logical-insn";
+	  if (off <= 0x1ffffL)
+	    {
+	      map = imap0;
+	    }
+	  else if (off <= 0x3ffffL)
+	    {
+	      map = imap1;
+	    }
+	  else
+	    {
+	      /* Logical address outside of IMAP[01] segment, not
+		 supported */
+	      return (0);
+	    }
+	  if ((off & 0x1ffff) + nr_bytes > 0x1ffffL)
+	    {
+	      /* don't cross VM boundary */
+	      nr_bytes = 0x1ffffL - (off & 0x1ffffL) + 1;
+	    }
+	  if (map & 0x1000)
+	    /* Instruction memory */
+	    {
+	      phys = targ_insn | off;
+	      to = "chip-insn";
+	    }
+	  else
+	    {
+	      phys = ((map & 0x7fL) << 17) + (off & 0x1ffffL);
+	      if (phys > 0xffffffL)
+		/* Address outside of unified address segment */
+		return (0);
+	      phys |= targ_unified;
+	      to = "unified";
+	    }
+	  break;
+	}
+
+      case 0x10: /* Physical data memory segment */
+	from = "phys-data";
+	phys = targ_data | off;
+	to = "chip-data";
+	break;
+
+      case 0x11: /* Physical instruction memory */
+	from = "phys-insn";
+	phys = targ_insn | off;
+	to = "chip-insn";
+	break;
+
+      case 0x12: /* Physical unified memory */
+	from = "phys-unified";
+	phys = targ_unified | off;
+	to = "unified";
+	break;
+
+      default:
+	return (0);
+      }
+
+
+  printf_unfiltered ("%s-xfer: 0x%08lx -> 0x%08lx imap0=%04x imap1=%04x, dmap=%04x, %s->%s, %d bytes\n",
+		     (write_p ? "wr" : "rd"),
+		     (long) memaddr,
+		     (long) phys,
+		     (int) imap0, (int) imap1, (int) dmap,
+		     from, to,
+		     (int) nr_bytes);
+
+  return inherited_ops->to_xfer_memory (phys, myaddr, nr_bytes, write_p, target);
+}
+
+
+void
+_initialize_remote_d10v ()
+{
+  init_remote_d10v_ops (0);
+  add_target (&remote_d10v_ops);
+}